عرض: 25 50 75 100 النتائج

نتائج البحث: 50 من أصل 41,289

دراسة الحركية ونمذجة تفاعل استرة حامض الاوليك باستخدام NaY زيولايت المحضر Kinetic Study And Modeling of Olic Acid Esterification Over Prepared Nay Zeolite

اسم المؤلف: رويدة نزيه عباس
اسم المشرف: عمار صالح عباس
الموضوع العام: الهندسة الكيمياوية
السنة: 2014
الموضوع الدقيق: الهندسة الكيمياوية
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم تحضير زيولايت من نوع استرة حامض الاوليك. اجريت فحوصات الاشعة السينية ونسبة الصوديوم ونسبة السيليكا الى الالومينا والمساحة السطحية والحجم المسامي للعامل المساعد المحضر.اظهرت الفحوصات التوافق بين العامل المساعد المحضر مع التركيب العام للزيولايت القياسي. | The NaY zeolite catalyst was prepared from locally available Iraqi kaolin in order to use it in the esterification reaction of oleic acid. X - ray diffraction, scanning electronic microscopy, sodium content, silica to alumina ratio, surface area and pore volume were determined for the prepared NaY zeolite. The results of x - ray diffraction and scanning electron microscopy show that the prepared NaY zeolite has approximately the same crystal structure as the standard. The sodium content was 12.26 wt. %, and the silica to alumina mole ratiowas 2.6, surface area 330 m2/g and pore volume 0.35 cm3/g. Because of the oleic acid is one of the free fatty acids that can found in vegetable oils and animal fats. Oleic acid used as a suggested feedstock to study and simulate production of biodiesel via esterification reaction.Esterification reaction was analyzed at different operational conditions including the ethanol/oleic acid molar ratio of 3/1 and 6/1, different temperature from 40 to 70 °C, reaction time up to 180 minutes and catalyst (2, 5 and 10 wt. % NaY zeolite). The maximum conversion of oleic acid (about 0.83) was observed at 6/1 ethanol/oleic molar ratio, 70 °C reaction temperature, 10 wt. % NaY zeolite as a catalyst, and 60 minutes contact time. The study of the kinetics of the esterification reaction of oleic acid, indicated that the value of the activation energies of esterification ware 42692 and 17218 J/mol for forward and backward reaction respectively, and frequency factors were 7.2*104 (mol - 1/minute) for forward reaction and 4.5 (mol - 1.25/minute) for backward reaction. The values of reactants and products orders were 1, 1, 1.2 and 1 for oleic, ethanol, ester and water respectively.The statistical analysis of the esterification reaction and experimental data indicates that the average relative error was 1.53, within 0.95 confidence level.ReactOp cascade package simulator used for simulation the behavior of batch and plug flow reactors in different operating modes (adiabatic and isothermal) carried out at selected operating conditions Contents Contents.

استخدام المادة النانو مسامية SBA - 15 لازالة الملوث العضوي من المياه الصناعية A Nanoporous SBA - 15 As Adsorbent For Removal of Organic Pollutants From Wastewater

اسم المؤلف: رغد عدنان حبش
اسم المشرف: انعام اكرم صبري طالب محمد نايف
الموضوع العام: الهندسة الكيمياوية
السنة: 2014
الموضوع الدقيق: العمليات الصناعية
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم تحضير ماده السليكا النانويه المسامية (SBA - 15) باستخدام (TEOS) كمصدر للسيليكا و(P123) كقوالب ومن ثم اجريت فحوصات عليها منها حيود الاشعة السينية (XRD),المجهر الالكتروني (SEM)،المساحة السطحيه ( (BET وطيف الاشعة تحت الحمراء (FTIR). بعد ذلك تم دراسة سلو | Santa Barbara Amorphous (SBA - 15) nanoporous silica was prepared using Tetraethylorthosilicate TEOS as silica precursor, Pluronic P123 as template, and characterized by means of X - ray diffraction (XRD), scanning electron microscopy (SEM), BET surface area and fourier transform infrared (FTIR) spectroscopy. The adsorption behavior of methylene blue from synthetic wastewater onto mesoporous SBA - 15 was studied. Both batch and continuous systems were studied. Batch experiments were carried out to measure the adsorption as a function of contact time, initial concentration (15 - 110 mg/l), pH (3 - 11) and adsorbent dose (0.1 - 2.3g/l) to specify the optimum operation condition. The equilibrium of the process was achieved within 20 min. Adsorption isotherms were fitted with the Langmuir, Freundlich and Temkin models. The equilibrium data were best represented by the Langmuir isotherm model with higher correlation coefficient R2 value of (0.990). The kinetics of the MB sorption on SBA - 15 were examined by using pseudo - first and pseudo - second order kinetics models. The kinetics analysis manifested that the overall adsorption process was successfully fitted with the pseudo - second - order kinetic model. In continuous studies, the adsorption of methylene blue from synthetic wastewater onto SBA - 15 in fixed bed was investigated and breakthrough data of the dye was determined. This research is run in small scale column with an internal diameter of 0.7 cm and 35 cm height at constant temperature and pH value. The effect of bed height (3, 6, 9 cm), flow rate (0.6, 1.0,1.4 ml/min) and initial MB concentrations (40, 70, 100 mg/l) on breakthrough curves were investigated. It is found that breakthrough time increases with increasing bed height, but decreases with increasing methylene blue inlet concentration and flow rate. Thomas and Yan models were used to determine the kinetic constants and to predict the breakthrough curves. The experimental data showed a better fit to Thomas adsorption model. In order to find out the possibility of reuse SBA - 15, desorption study was also carried out in this investigation. SBA - 15 can be effectively recovered by calcinations and reused fourteenth times in batch system and five times in continuous system without significant loss in removal of methylene blue from aqueous solution. The long reuse life of SBA - 15 makes it an efficient adsorbent for removal of methylene blue from wastewater at high potential for application in industry.

عمليات التنافذ الامامي - العكسي لمعالجة المياه الملوثة بالزيوت Forward - Reverse Osmosis Processes For Oily Wastewater Treatment

اسم المؤلف: نور حمود زغير
اسم المشرف: حسن فرهود مكي
الموضوع العام: الهندسة الكيمياوية
السنة: 2014
الموضوع الدقيق: الهندسة الكيمياوية
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الدراسة, تم بحث مدى ملائمة عمليات التنافذ (الامامي - العكسي) لمعالجة المياه الملوثة بالزيوت. حيث طبقت عملية التنافذ الامامي لاسترجاع الماء النقي من المياه الملوثة بالزيوت. تم استخدام زيت محرك الديزل والكازولين نوع (15W - 40) لتحضير محلول اللقيم, بي | In this study, the feasibility of Forward - Reverse membrane osmosis system was investigated for treating the oily wastewater. Forward osmosis (FO) process was applied to recover pure water from oily wastewater. Gasoline and diesel engine oil (15W - 40) was used to prepare the feed solution (FS). While sodium chloride (NaCl) and magnesium chloride (MgCl2) salts were used as draw solutions, and the membrane that was used in FO process was cellulose triacetate (CTA) membrane. While reverse osmosis process was used to recovery water from the diluted draw solution using polyamide (thin film composite (TFC)) membrane. In the first stage was applying the FO process for treating the oily wastewater with two parts. The first part included the FO process using the batch system whereas the second part included the FO process using the flowing system for different draw solutions. Theoperating parameters studied were : draw solution type, draw solution concentrations (0.25 - 0.75 M), oil concentration in FS (100 - 1000 ppm), the temperatures of FS and DS (30 - 45 °C), pH of FS (4 - 10) and for the forward osmosis flowing process the flow rate of both DS and FS (20 - 60 l/h), while the pressure was maintained at 0.5 bar. The run - time of the FO process was for five hours. It was found that water flux through membrane decreases with increasing time, while oil concentration in the FS increases with increasing time. Also, it was found that the water flux produced from the osmosis cell and oil concentration in FS increase by increasing the concentration of draw solutions, the flow rate of FS and the temperature for a limit (40oC), then, the water flux and oil concentration decrease with increasing the temperature because of happening the internal concentration polarization phenomenon. By increasing the oil concentration in FS and the flow rate of the DS, the water flux and oil concentration in FS were decreased. While it had a fluctuated behavior with increasing the pH of oily wastewater. It was found also that MgCl2 gives water flux higher than NaCl. It was observed that the best operating conditions in this study were : concentration of salt (0.75 M) for MgCl2, oil concentration (100 ppm), pH of FS (7.3), temperature of feed and draw solution (40oC), flow rate of FS (60 l/h), and flow rate of DS (20 l/h). The values of resistance to solute diffusion within the membrane porous support layer were 55.93 h/m and 26.21 h/m for NaCl and MgCl2 respectively. The second stage was applied reverse osmosis process for separating the fresh water from a diluted (NaCl) solution using different parameters such as draw solution concentration (0.08 - 0.16 M), feed flow rate (20 - 40 l/h) within two hours of work of the reverse osmosis system.

تاثير المحتوى المائي، درجة الحرارة وكلوريد الصوديوم على تاكل CO2 للصلب الكربوني (A106 B) في النفط العراقي Effect of Water Content , Temperature And NaCl on CO2 Corrosion of C - Steel (A 106 B) in Iraqi Crude Oil

اسم المؤلف: انعام يوسف عبد الرحمن
اسم المشرف: سعد احمد جعفر
الموضوع العام: الهندسة الكيمياوية
السنة: 2014
الموضوع الدقيق: الهندسة الكيمياوية
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: صلاح الدين
الصفحات الاولى:
المستخلص: ان التاكل الداخلي في انابيب الصلب الكربوني الذي يحدث بوجود غاز ثاني اوكسيد الكربون يعتبر مشكلة جوهرية في صناعات النفط والغاز وهو يقترن دائما مع وجود الماء. ان احتمالية حدوث التاكل تزداد بصورة عامة مع تزايد نسبة الماء ومع زيادة مستوى الماء المنتج تزداد مع | Internal corrosion of carbon steel pipelines occurring in the presence of CO2 is a substantial problem in the oil and gas industries. It is always associated with the presence of free water. The likelihood of corrosion generally increases with the volume fraction of the water phase. As the produced water level increases, the corrosion rates of carbon steel increase very rapidly and causes damage of petroleum and gas pipelines. The present research work focuses on the investigating of the corrosion rate of carbon steel as flow line in crude oil production with CO2 content employing three Iraqi crude oil (Kirkuk crude oil, Halfaya crude oil, Rumalia crude oil) with different brine concentrations [1%NaCl, 2%NaCl, 3%NaCl]. Determining the corrosivity of Iraqi crude oil was studied for the first time. Experiments were performed in an autoclave test apparatus, crude oil - produced water mixtures, water cuts were (0, 10, 20, 30, 40, and 100%), and total volume of mixtures inside the autoclave was always kept at 100ml and temperature (20, 40, 60°C). For all experiments, CO2 partial pressure was maintained at (4 bar) and rotational speed (500 rpm).The corrosion rates were determined by the weight loss technique. The results revealed that the corrosion rates of carbon steel increased by increasing water cut and temperature, but decreases with increasing salt concentration for all types of crude oil. Results also indicated that different crude oil has significantly different effects on corrosion of carbon steel, with identical brine compositions. Therefore, Rumaila crude oil exhibits the highest corrosion rates and Kirkuk crude oil exhibits the lowest corrosion rates while Halfaya crude oil exhibits a moderate corrosion rates e.g. at 1% NaCl, 20% water cut, temperature 60°C, pressure 4bar, the corrosion rate of carbon steel in Rumaila crude oil is 0.9163mm/yr whereas it is 0.564 mm/yr and 0.705 mm/yr in Kirkuk crude oil and Halfaya crude oil respectively. The Corrosion Rate Break produced water level was determined from the experiments. These tests are employed to evaluate the requirements for corrosion inhibitor treatment. At 100% water cut (brine/CO2) the corrosion rates of carbon steel was the highest. The presence of crude oil decreases the corrosion rates e.g. at 1% NaCl,100% water cut(brine/CO2) the corrosion rate is 7.1197 mm/yr, whereas at 40% water cut/ Rumaila crude oil the corrosion rate is 1.4097 mm/yr.

محاكاة لمعمل الاثلين في العراق باستخدام الاسبن بلسن والماتلاب Simulation of Iraqi Ethylene Plant Using Aspen Plus And Matlab

اسم المؤلف: هدى عامر عبد القادر
اسم المشرف: صفاء الدين عبد الله النعيمي زيدون محسن شكور
الموضوع العام: الهندسة الكيمياوية
السنة: 2014
الموضوع الدقيق: العمليات الكيمياوية
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يعد معمل الاثيلين واحد من اهم معامل البتروكيماويات والاكبر حجما في العالم في الوقت الحاضر. بالاضافة الى ذلك، فانه يعتبر جوهر اي مجمع للبتروكيماويات. وفي مثل هذه المعامل، يخضع الغاز الطبيعي الى العديد من العمليات لفصل مكوناته.الهدف من هذه الدر | Ethylene plant is one of the most important and largest volume petrochemicals in the world today. In addition, it is a core of any petrochemical complex. In such plant, the natural gas is subjected to many processes to separate the components. The objective of this study is to develop a detailed model to simulate an ethylene plant, which includes a pyrolysis section, a separation system and an integrated refrigeration system. An optimization has been performed for a part of the plant; this part is the furnace.The ethylene plant at the Petrochemical Complex in PC1 - Basrah has been considered as a case of study. The kinetics of ethane thermal cracking in pyrolysis furnace has been simulated using Aspen Plus and MATLAB. The radiant coils in furnace have been modeled as a one dimensional plug - flow reactor in which ethane is subjected to steam cracking. The overall plant has been simulated using Aspen Plus version (7.3), and the reactor has been simulated using MATLAB environment, version (2013a) in addition to Aspen Plus. The validity simulation model test has been achieved by comparing the simulation results with the actual data collected from PC1and it showed a great similarity and reliability for both simulation models.A steady state simulation model has been developed to study the behavior of multi - types feed supplied to the plant. Furthermore, the model has been used to evaluate the effects of various process parameters, including temperature of reaction (Reactor outlet temperature), dilution steam to ethane ratio (DS/HC) and the outlet flow rate of hydrocarbons.The other aim of this study is to obtain the optimum operating conditions using Aspen Plus for the reactor in the furnace which has an effect on the final product to determine the maximum profit. Optimization using Genetic Algorithm (GA) by MATLAB has been used as well as Aspen Plus, and a comparison has been made between both methods. The selection of the optimum operating conditions of reactor was obtained to achieve the following objectives together : • Increasing the production rate of ethylene.• Increasing the outlet flow rate of hydrocarbons.These objectives have managed to be achieved all together by maximizing the total profit obtained from the furnace. Finally, Aspen Plus results show that the objectives have been satisfied by manipulating the decision variables Temperature of reaction (Reactor outlet temperature) in the range of (850 - 920) ?C, dilution steam to ethane ratio DS/HC in the range of (0.2 - 0.5) and the outlet flow rate of hydrocarbons ) in the range of (2421 - 1064) Kmole/hr to increase the profit of the furnace to approximately (10.541%) and (5.55%) for the whole plant.

معالجة واعادة استخدام المياه الناتجة من حقول نفط الاحدب العراقية Treatment And Reuse of Produced Water From Al - Ahdab Iraqi Oilfields

اسم المؤلف: حسين باسم عليوي
اسم المشرف: Basma A. Abdul Majeed
الموضوع العام: الهندسة الكيمياوية
السنة: 2014
الموضوع الدقيق: الهندسة الكيمياوية
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: الهدف الاساسي من هذا البحث هو تطوير طريقة عملية لمعالجة المياه المنتجة من حقول النفط العراقية. في هذه الدراسة تم توظيف نظام متحد من ثلاث عمليات معالجة هي التخثير والامتزاز والتبادل الايوني لازالة وتقليل بعض الملوثات الرئيسية مثل العكورة والمحتوى الزيتي وم | The overall goal of this research was to develop a practical method of treating co - produced waters from oil - field sources. In this study, combined coagulation - adsorption - ion exchange treatment was employed for the removal of some main contaminants like turbidity, oil content, and total dissolved solids from produced water. These combination steps are not studied before. The wastewater used in this work was taken freshly form Al - Ahdab oilfields. The coagulants used in this study were aluminum sulfate (alum) as a primary coagulant and calcium hydroxide (lime) as a coagulant aid. The performance of these coagulants was investigated through jar test by comparing turbidity removal at different coagulant / coagulants aid ratio, coagulant dose, water pH, and sedimentation time. The best conditions for turbidity removal can be obtained at coagulant dosage of 80 mg/L at pH 6 and 120 min for sedimentation time. There was an improvement in the turbidity removal when 25% lime was used in conjunction with 75% alum. At these conditions, the turbidity reading was reduced from 92 to 2.1 NTU. In addition, an attempt was made to examine the relationship between turbidity (NTU) and total suspended solids (mg/L) on the same samples of produced water. This study presents an investigation on the technical feasibility of using organoclay for adsorption of oil content from produced water. The organoclay was prepared by combination of Iraqi bentonite with quaternary amine (tetraethylammonium chloride). Batch mode experiments were conducted to study the effects of amine/ bentonite ratio, organoclay quantity, pH, and contact time. The analysis results showed that the organoclay adsorbent was very effective in removing oil content from produced water and the best results obtained for the removal of oil content are 16 g/L of prepared organoclay having 35 g amine/ 100 g bentonite, pH 3, and 120 min for contact time. These results reduce the concentration of oil content from 532.1 to 2.7 mg/L. Equilibrium adsorption isotherms and kinetics were investigated. The adsorption isotherm data were fitted well to Temkin isotherm as highest coefficient of correlation (R2=0.996) and lowest value of standard deviation (Sd=2.385). The adsorption kinetic data were fitted very well the pseudo - second order kinetics model (R2=0.997 and Sd=1.644). The continuous experiments were carried out in a fixed - bed column. The results revealed that adsorption capacity increases with increasing bed depth and with decreasing flow rate. In this work, a continuous ion exchange study in fixed - bed columns was performed to reduce TDS concentration from produced water. The experiments were subjected to lab - scale ion exchangers, consisting of two types of commercial resins connected in series. The two types of resins used in this work were : strongly acidic cation exchanger of type Dowex 650C and strongly basic anion exchanger of type Dowex I. 550A. Comparison of Thomas, Yoon - Nelson, and Adams - Bohart models with experimental kinetics results was done, and model parameters were evaluated by linear regression analysis for TDS reduction in different bed depths and flow rates. The obtained experimental data were in good agreement with Thomas and Yoon - Nelson models (R2 reaches to 0.996). Reverse flow regeneration was carried out in a fixed - bed column for exhausted resin by washing with diluted acid and base solutions. The regenerated resin was reused in the same column. Approximately, 65% of the original sorption capacity was restored.

معالجة واستصلاح الماء المصاحب للنفط العراقي باستخدام طريقة عمود التطويف وتقنية الاغشية Treatment And Reclaiming of Iraqi Oil Field Produced Water By Flotation Column And Membrane Technology

اسم المؤلف: هدى كاظم حسن
اسم المشرف: ثامر جاسم محمد قصي فاضل عبد الحميد
الموضوع العام: الهندسة الكيمياوية
السنة: 2014
الموضوع الدقيق: العمليات الكيمياوية
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يتم انتاج كميات كبيره من الماء المصاحب النفطي من قبل شركة نفط الجنوب.يعتبر محتوى النفطي oil - water والاملاح الذائبه TDS من اخطر الملوثات والتي تتم معالجتها باحدث التكنلوجيا في السنوات الاخيره تم استخدام تقنية الاغشية لمعالجة الماء المصاحب النفطي.الهدف م | A large amount of oil field produced water is generated by South Oil Company. Oil - in - Water and TDS are the most serious pollutants for which current treatment technologies are often costly and ineffective in order to reuse water. In recent years, membrane process has been applied for produced water treatment.The aim of the present work is to treat produced water from oil well before being disposed in environment or reused as re - injection to oil well or agriculture water. Oil field produced water is very difficult wastewater to treat and its characteristics change as well to well. The sample test of this study was taken from dehydrator in the DSI/North Rumila/Southern Oil Company in Basrah /Iraq. The treatment process of produced water consists of two stages. The first stage as pre - treatment is achieved by continuous dissolved air flotation (DAF) to reduce the oil content. The second stages, as advanced treatment processes, are accomplished by microfiltration (MF) to reduce the turbidity and nanofiltration (NF) to reduce the salt content as TDS of produced water. The experimental work was carried out using dissolved flotation column is of Perspex glass (0.1 m I.D, 1.5 m height). The bottom of the column connected to a conical joint of QVF glass with a Teflon distributer. The effect of operating parameters (flow rate of produced water, pH, initial oil concentration, flotation time, alum dosage and surfactant of SLS) saturated pressure=5 Atm on the oil content or oil removal efficiency was investigated. The results showed that the oil removal efficiency increases with increasing the flow rate of produced water, the flotation time and coagulants dosage. The oil removal efficiency in DAF unit without coagulants is equal to (80, 94, 95%) for initial oil concentration (30, 50, 70 ppm), respectively at a flow rate 0.03 m3/h and pH=6. While flotation with coagulation, the results indicated that the removal efficiency is equal to 94% (residual oil content <10 ppm) at pH=5, alum dosage=560 ppm, and initial oil concentration=50 ppm, and the removal efficiency is equal to 89.6 at pH=6, alum+SLS dosage=80 ppm, and initial oil concentration=50 ppm. The kinetics of flotation column was studied and it was found that the order of the reaction is changing between zero to first order.The treatment of produced water by membrane technique was carried out by cross flow mode in hallow fiber microfiltration (MF) and nanofiltration (NF). The effect of operating parameter such as transmembrane pressure (TMP) (1, 1.5, 2 bars) with cross flow 20 mL/min, at room temperature, on the flux, rejection, and turbidity and TDS removal was studied. The experimental results by MF manifested that the permeation flux is (108, 156, 611 l/m2.h) and transemembrane pressure is 2 bar at initial turbidity (100, 200, 300 NTU), respectively. But NF, as a final treatment of produced water to reuse, was studied at different feed concentrations (82950, 75050, 67150 ppm) with different TMPS. According to the experimental results, the higher permeation of flux =15 (l/m2.h) at 82950 ppm and 2 bar, was obtained.The experimental results of the removal efficiency were represented in two and three dimensional graphs. An empirical correlation for R% as a function of different parameters (flow rate, pH, and oil concentration) was developed by aided computer using the following formula %R= a + c1*x1n1 + c2*x2n2 + c3*x3n3.

انتقال الحرارة في الغليان الحوضي باستخدام موائع النانو Pool Boiling Heat Transfer Using Nanofluids

اسم المؤلف: خيرية مطر عيسى الخزاعي
اسم المشرف: جمال مانع علي الربيعي
الموضوع العام: الهندسة الكيمياوية
السنة: 2014
الموضوع الدقيق: الهندسة الكيمياوية
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يمكن اعتبار نظام المغلي التنوي واحدة من اكثر الطرق فعالية لزيادة التبادل الحراري في منطقة صغيرة نسبيا. انتقال الحرارة في الغليان الحوضي لموائع النانو تم التحقق عنها تجريبيا باستخدام مياه الالومينا AL2O3 ومياه ثاني اوكسيد التيتانيوم TiO2.كموائع نانويه (n | Nucleate boiling regime can be considered one of most effective ways to increase the heat exchange in a relatively small area. Pool boiling heat transfer nanofluid was investigated experimentally using Al2O3 - water and TiO2 - water nanofluids. The experimental test rig consists of boiling vessel and electrically heated plate heating element of stainless steel as heating element. Different concentrations of nanofluids were tested (0.05w %, 0.1w %, 0.3 w%, and 0.5 w %). The nanofluids for Al2O3 and TiO2 were prepared by mixing the( Al2O3 and TiO2) nanoparticles with distilled water in magnetic stirrer for three time periods at (2, 3 and 4) hours and for 1 hour in an ultrasonic bath to suspend the nanoparticles in base fluid. The nanofluids were scanned by scanning electron microscope to ensure well dispersion of nanoparticles in distilled water. Experiments were carried out firstly using pure water then nanofluid to compare the heat transfer enhancement. Results give maximum enhancement ratio in heat transfer rate of (100%) for 0.5% weight concentration for Al2O3 - water nanofluid and (81.82%) for TiO2 - water nanofluid at the same concentration. In both nanofluids the enhancement ratio increases with increased nanoparticle concentrations.This lead to increase in pool boiling heat transfer coefficient.

دراسة حركية التفاعل لوحدة التهديب بالعامل المساعد في مصفى الدورة Kinetics Study of Catalytic Reforming Process In Daura Refinery

اسم المؤلف: حيدر مجيد خضير
اسم المشرف: محمد فاضل عبد
الموضوع العام: الهندسة الكيمياوية
السنة: 2014
الموضوع الدقيق: الهندسة الكيمياوية
الدرجة: دبلوم عالي
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Catalytic naphtha reforming is one of the key processes in petroleum refining, converting gasoline boiling range low - octane hydrocarbons to high - octane compounds which can be blended into gasoline. Other valuable by products include hydrogen and cracked light gases. Modeling of a typical semi - regenerative catalytic reformer of Duara refinery has been carried out involving most its key constituent units. Kinetic modeling of the reactions occurring in the fixed bed reactors connected in series formed the most significant part of the overall simulation effort. A reaction scheme involving (15 pseudo components) connected to gether by a network of 30 reactions for components in the C5 - C10 range has been modeled. The Hougen - Watson Langmuir - Hinshelwood type reaction rate expressions are used to represent rate of each reaction. Deactivation of the catalyst was modeled by including the corresponding equations for coking kinetics. It was found that Paraffines and Naphthenes undergo a continuous reduction through the three reactors while the rate of formation of aromatics is becoming slower as the reactants proceed to the third reactor. The reactor of naphtha reforming could be considered as a hydrogen production.

ازالة الكبريت من زيت الوقود باستخدام الاكسدة المعززة بالموجات الفوق الصوتية Ultrasound - Assisted Oxidative Desulfurization of Fuel Oil

اسم المؤلف: جعفر مازن جعفر
اسم المشرف: نيران خليل ابراهيم ولاء عبد الهادي نوري
الموضوع العام: الهندسة الكيمياوية
السنة: 2014
الموضوع الدقيق: الهندسة الكيمياوية
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Due to the dramatic environmental impact of sulfur emissions associated with the exhaust of engines, sulfur content specification for diesel fuels became more and more stringent worldwide. Last environmental regulations for ultralow sulfur diesel require very deep desulfurization processing, which cannot be met by the conventional hydrodesulfurization process (HDS).The present work focuses on benefiting from integrating an ultrasoundassisted oxidative desulfurization process (UAODS) with the conventional HDS process to produce ultra - low sulfur fuels. The proposed method involves a batch ultrasound - assisted oxidative desulfurization process to desulfurize a previously hydrotreated diesel containing 480 ppm sulfur. The oxidizing system used was H2O2/CH3COOH with FeSO4 being used as a catalyst. An ultrasonic probe system was used to enhance the conversion of sulfur - bearing compounds that exist in diesel to sulfones and sulfoxides to affect their removal by a certain separation method, such as extraction or adsorption.The major influential parameters related to UAODS process have been investigated, namely : ratio of oxidant/fuel, ratio of the promoter/oxidant, dose of catalyst, reaction temperature, intensity of ultrasonic waves. A set of comparative studies were also carried out including type of extraction solvent, effect of initial sulfur content, and type of sulfur separation method. Total evaluation for the treated diesel was performed, including GC - MS analysis which has been used to monitor the change of organic sulfur compounds andhydrocarbons in diesel during the desulfurization process.The oxidation treatment, in combination with ultrasonic irradiation, revealed a synergistic effect for diesel desulfurization. The experimental results showed that the removal efficiency for sulfur compounds could amount to 98%, and sulfur level can be reduced to 12 ppm at mild operating conditions (70 and 1 bar). This indicates that this process is so efficient and promising for the production of ultra - low sulfur diesel fuels.The kinetics of the reaction has been also studied. It was observed that the UAODS of diesel fuels fitted pseudo - first - order kinetics under the studied experimental conditions. During this process, values of the apparent rate constant and activation energy were 0.373 min - 1 and 24 kJ/mol, respectively.

تخمين حركية تفاعل ازالة الكبريت للنفثا الثقيلة العراقية Prediction of Kinetic Reaction of Iragi Heavy Naphtha Desulferization

اسم المؤلف: سها سامي قاسم
اسم المشرف: زيدون محسن شكور
الموضوع العام: الهندسة الكيمياوية
السنة: 2014
الموضوع الدقيق: الهندسة الكيمياوية
الدرجة: دبلوم عالي
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: واحدة من التحديات في مصافي تكرير النفط الخام في الاونة الاخيرة هو الحد من محتوى الكبريت من النفثا الثقيلة الى الحدود الدنيا. في هذا البحث تم اخذ مواصفات محتوى الكبريت للنفثا الثقيلة بمعدل 632 جزء في المليون الى 2.5 جزء في المليون، في درجات حرارة التفاعل ( | One of the recent challenges in the petroleum refineries is the reduction of sulfur content of heavy naphtha to the new lower limits. In this reaserch, was taken the specification of the sulfur content of heavy naphtha at arrange 632 ppm to 2.5 ppm, The range of reaction temperatures is (35 - 175) oC and liquid hourly space velocity (LHSV) at range of (1.3 - 1.4) hr - 1 and hydrogen pressure is 35 bars.The simulators are useful tools to manage operation and to improve the profitability of the process. In this study, excel and Matlab program were developed to simulate hydrodesulferization process (HDS) in vapor phase reactor of heavy naphtha hydrotreating unit of Daura refinery, the comparison between the plan results with HDS reactor model results was made.. Based on the model results the optimum operating conditions were determined. Acomputer program MATLAB (Matrix Laborator) it is software for developed code of kinetic parameter estimation problem using the estimation method and least square as objective function and new GA as solving method. The code was implemented on personal computer (intel (R) Core (TM) i3 CPU, 2.39 GHz processor, 2 GB RAM). The function to be minimized was the sum of squares of the differences between calculated and measured concentration.Genetic optimization method was used to define the parameters of desulfurization reaction kinetic. This hydrotreating reaction kinetic model for desulfurization of Daura heavy naphtha was determined for heavy naphtha boiling point range of (35 - 175) C and using a commercial (HDS) catalyst cobalt - molybdenum (Co - Mo) supported of alumina.The result showed that the order of kinetic reaction was first order for heavy naphtha hydrotreating with (Co - Mo) supported of alumina, and the graphically method is more suitable and less error than optimization method for represent the kinetic reaction for heavy naphtha hydrotreating in Daura refinery.

فعالية عامل مساعد محضر ومحفز بمعادن مختلفة لعملية ازالة الكبريت بالهدرجة لزيت الغاز العراقي Activity of A Prepared Catalyst Promoted By Different Metals For The Hydrodesulfurization of Iraqi Gas Oil

اسم المؤلف: طارق محمد نايف
اسم المشرف: Abdul Halim A.K. Mohammed Hussein K. Hussein
الموضوع العام: الهندسة الكيمياوية
السنة: 2014
الموضوع الدقيق: الهندسة الكيمياوية
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The present work deals with the improvement of Iraqi gas oil containing 1.402 wt. % sulfur by hydrotreating process using different prepared hydrodesulfurization catalysts (Ni - Mo/? - Al2O3, Co - Mo/? - Al2O3, Co - Ni - Mo/? - Al2O3, Ti - Ni - Mo/? - Al2O3 and Re - Ni - Mo/? - Al2O3). All catalysts were prepared under vacuum impregnation to ensure efficient precipitation of metals within the carrier ? - Al2O3. Physical adsorption by nitrogen was investigated, and used for determination of the surface area and pore size distribution of prepared catalysts.The results showed that modified catalysts Ti - Ni - Mo/? - Al2O3 and Re - Ni - Mo/? - Al2O3 have a high surface area 225.1 and 235.23 m2/g respectively, as compered with conventional prepared catalysts Ni - Mo/? - Al2O3 and Co - Mo/? - Al2O3 which their have surface area 178.5 and 191.4 m2/g respectively, and exhibits behavior of type four according to Brunauer, Emmett and Teller (BET) classification, and type H1 according to de Boer classification for hysteresis loop, so, it was concluded that the pores of these catalysts are cylindrical. The performances of all the synthesized catalysts for removal of sulfur and aromatic saturation gas oil were tested at different LHSV (1 to 4 h - 1), temperatures ( 275 to 350 °C), constant pressure 40 bar, and H2/HC ratio 500 ml/ml. The results showed that the sulfur and aromatic content were decresed at all operating conditions for all prepared catalysts. It was found that the sulfur removal from gas oil increases with temperature and decreasing with the space velocity, and the temperature has higher effect on the process of sulfur removal than the space velocity. It was found also that Ni - Mo/? - Al2O3 catalyst is slightly better in sulfur removal (61.5 wt. % ) with than Co - Mo/? - Al2O3 (59.2 wt. %) at the same operation conditions (350 °C and LHSV 1 h - 1), and hydrodesulfurization over Ni - Mo/Al2O3 was improved remarkly by adding Ti and Re promoters. Maximam sulfur removal was 76.81 wt. % using Re - Ni - Mo/? - Al2O3 at temperature 350?C, LHSV 1 h - 1, while minumum aromatic content value is 15.44 wt. % for Ni - Mo/ ? - Al2O3. Calculations showed that the hydrodesulfurization rate expressions fitted with second order reaction kinetics model.The rate constant varied from 0.005 to 0.144 liter/kg.h and the values of activation energy varied from 50.0 to 93.59 kJ/mole for all prepared catalysts. Thiele modulus, for all prepared catalysts was calculated.The lower values of the Thiele modulus (> 0.4) gives strong evidence of negligible pore diffusion limitation.

ازالة المحتوى الكبريتي من وقود الديزل بواسطة الاكسدة والاستخلاص بالمذيب Desulfurization of Diesel Fuel By Oxidation And Solvent Extraction

اسم المؤلف: شيم بهجت عبد الكريم
اسم المشرف: ودود طاهر محمد رغد فريد
الموضوع العام: الهندسة الكيمياوية
السنة: 2014
الموضوع الدقيق: الهندسة الكيمياوية
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يهدف البحث الى ازالة المحتوى الكبريتي من مقطع الديزل المهدرج للتخلص من المركبات الكبريتية الثايوفينية التي تتعذر ازالتها بواسطة عملية الهدرجة المعتمدة في المصافي النفطية. ودراسة افضل الظروف للحصول على اعلى نسبة ازالة.رست الظروف التشغيلية التالية : سرعة ال | Removal of sulfur species from fuels is an increasingly critical environmental issue. Hydrodesulfurization (HDS) removes sulfur compounds, such as mercaptans and sulfides from hydrocarbons; however, some sulfur - containing compounds (such as diebenzothiophene) are very difficult to remove and need deep desulfurization processes.This work was applied to the desulfurized diesel fuel produced from the conventional HDS process for ultra - desulfurization. The used fuel types in this investigation were either real diesel fuel or simulated diesel fuel, where sulfur - containing compound ( dibenzothiophene DBT) converted to its corresponding sulfone by oxidation using hydrogen peroxide as an oxidant and acetic acid as homogenous catalyst, and solvent extraction by using acetonitrile (ACN) or N - methyl - 2 - pyrrolidone (NMP) as extractants.Simulated diesel fuel according to British Petroleum 200B doped with dibenzothiophene (DBT) was prepared, the effect of stirring speed (150, 250, 350 and 450) rpm, temperature (30, 40, 45 and 50) ?C, oxidant/simulated diesel fuel ratio (0.5, 0.75,1 and 1.5) (v/v), catalyst/oxidant ratio (0.125, 0.25, 0.5 and 0.75) (v/v), solvent type, and solvent/simulated diesel fuel ratio (0.5, 0.6, 0.75 and 1) (v/v) were examined in order to obtain the maximum sulfur removal. The results of this work exhibit that the highest removal of sulfur 98.5% for N - methyl - 2 - pyrrolidone and 95.8% for acetonitrile were obtained under the conditions of operating in table below : Stirring Speed (rpm) 350 Temperature (?C) 50 Oxidant (hydrogen peroxide)/simulated diesel fuel ratio 1 Catalyst (acetic acid)/oxidant ratio 0.5 Solvent (ACN or NMP)/simulated diesel fuel ratio 1 Experiments with the above best conditions were carried out on Real diesel fuel obtained from Al - Dora refinery with 1000 ppm sulfur containing compounds. It was found that sulfur removal from real diesel fuel was 62.5% for acetonitrile and 75% for N - methyl - 2 - pyrrolidone.

تطبيقات الطرق العددية في التاكل الكلفاني للمعادن المزدوجة Applications of Numerical Methods In Galvanic Corrosion of Coupled Metals

اسم المؤلف: بسمة محمد كاظم الشاهر
اسم المشرف: جمال مانع علي الربيعي
الموضوع العام: الهندسة الكيمياوية
السنة: 2014
الموضوع الدقيق: العمليات الصناعية
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم دراسة سلوك تاكل معادن النحاس والكربون الصلب والزنك في تراكيز مختلفة من حامض الهيدروكلوريكHCl) ) (0.025، 0.05 و0.075 مولاري ) عند درجات حرارة مختلفة (30، 40 و50 درجة مئوية) باستخدام القياسات الكهروكيميائية (Electrochemical Measurements) في حالة المعا | The corrosion behaviors of metals Copper, Carbon Steel and Zinc in a different concentrations of HCl acid (0.025, 0.05 and 0.075M) at different temperatures (30, 40 and 50°C) were investigated using electrochemical measurements in couple and single state.The galvanic behaviors of coupled metals (Cu - Fe),( Cu - Zn) and (Fe - Zn)were studied using Zero Resistance Ammeter (ZRA) technique, it has been used to measure the galvanic current (Ig) and galvanic potential (Eg) with time. The galvanic corrosion cells for all couples have equal areas of anode and cathode (2×2cm).The galvanic current density (ig) is increased with increasing solution concentration and temperature. The galvanic potential (Eg) is shifted to less negative with increasing solution concentration and temperature and it is close to the corrosion potential of the anode in the couple conditions.The potentiostatic polarization behavior of single three metals (Copper, Carbon Steel and Zinc) in different concentrations of dilute HCl acid (0.025, 0.05 and 0.075M) at temperature (40°C) is found under activation control. The corrosion current density is increases with increasing solution concentration and gives the following arrangement of metals : Cu> Fe > Zn A numerical analysis of galvanic corrosion was presented. The analysis was based on three numerical methods as the boundary element method (BEM), the finite element method (FEM) and the finite difference method (FDM).The potential and current density distributions on the galvanic elements are described by the Laplace equation. The Laplace equation was solved numerically, to determine the potential, current density, and corrosion caused by the galvanic cell using designed computer programs in MATLAB R2014a. The experimentally determined polarization curves have been used in order to define the nonlinear boundary conditions. This boundary value problem has been solved using Newton - Raphson iterative numerical procedure. For the three couple systems (Cu - Fe, Fe - Zn and Cu - Zn), the results obtained for galvanic potential and current density, using the numerical methods (BEM, FEM and FDM) with the overall deviations are 6.689, 10.818 and 18.846 respectively for galvanic current density and 0.631, 1.210 and 1.787 respectively for galvanic potential. From these results it can conclude that the galvanic current density and galvanic potential distribution calculated from the BEM model was in good agreement with the experimental measurements. These are because the main advantages of the BEM over the Finite Element Method (FEM) and the finite difference method (FDM) are high accuracy, discretization on the boundary only which results in a very small number of unknowns, easy dealing with non - regular boundaries and openings that only the domain boundary of interest is required to be discrete, also BEM needs fewer equations and a smaller matrix size than FEM and can solve both finite and infinite domain problems.

استخلاص الزيوت العطرية من قشور الحمضيات باستعمال التقطير البخاري بمساعدة المايكرويف Extraction of Essential Oils From Citrus By - Products Using Microwave Steam Distillation

اسم المؤلف: سارة جبير صالح
اسم المشرف: ابتهال كريم شاكر
الموضوع العام: الهندسة الكيمياوية
السنة: 2014
الموضوع الدقيق: الهندسة الكيمياوية
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يهدف هذا البحث الى استخلاص الزيت العطري من ثلاثة انواع من قشور الحمضيات (البرتقال, الليمون, اللالنكي) بطريقتين : التقطير البخاري والتقطير البخاري بمساعدة المايكرويف.ودراسة تاثير عوامل الاستخلاص : (وزن القشور, وقت الاستخلاص,طاقة المايكرويف ونوع قشور الحمضي | The main objectives of this research is to extract essential oil from : orange( citrus sinensis), lemon( citrus limon) and mandarin( citrus reticulata) peels by two methods : steam distillation (SD) and microwave assisted steam distillation (MASD), study the effect of extraction conditions : weight of the sample( 398.56g, 281.8g, 116.76g), extraction time, microwave power( 135W, 265W, 445W) and citrus peel type( orange, lemon, mandarin) on oil yield and compare the results of the two methods, the resulting essential oil was analyzed by Gas Chromatography (GC).Essential oils are highly concentrated substances used for their flavor and therapeutic or odoriferous properties, in a wide selection of products such as foods, medicines and cosmetics. Extraction of essential oil is one of the most time and effort consuming process. Microwave - assisted extraction is a green technique for the extraction of natural products. (MASD) was better than (SD) in terms of rapidity, energy saving and yield. (MASD) gave higher yield than (SD) with shorter extraction time, yield of orange oil extracted by (MASD) was (1.150%) in (35min.) compared to (1.095%) in (45min.) by (SD) process, same results obtained for lemon and mandarin. It was found that the optimal microwave power was (135W) and the yield was : (1.150%, 1.115%, 0.940%) for orange, lemon and mandarin respectively, (MASD) increased extraction temperature in short time and to a higher level compared to (SD).It was found that the optimal weight was (398.56g) and the yield in (SD) was : (1.095%) and MASD (1.091%) for orange oil, same results obtained for lemon and mandarin.The best citrus peel type which gave the highest yield was orange followed by lemon then mandarin in both processes.Limonene is the most abundant component in citrus essential oil, (GC) analysis showed that the amount of limonene increased in low microwave power with long extraction time for mandarin oil it was (84.3891% at 135W in 60min.), while for (SD) it was (83.0271% in 75min.) and decreased with increasing microwave power for orange oil it was (80.9661% at 265W in 35min.) while for (SD) it was (83.2189% in 45min.), (SD) was more convenient to give high amount of limonene because of the graduate temperature rise, while in microwave extraction exposure to low microwave power for long time would give complete recovery and better quality of essential oil.

تاثير الحماية من التاكل بواسطة الليزر على سبائك الالمنيوم The Effect of Laser Surface Melting Corrosion Protection On Al Alloys

اسم المؤلف: هبة خميس اسماعيل
اسم المشرف: شذى احمد سامح
الموضوع العام: الهندسة الكيمياوية
السنة: 2014
الموضوع الدقيق: الهندسة الكيمياوية
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يهدف هذا البحث الى دراسة تاثير المعاملة بالليزر على تاكل سبائك الالومنيوم (7075, 6061, 5083) المغمورة في محلول ملحي (كلوريد الصوديوم) بمختلف التراكيز. وقد تم اعداد عينات من سبائك الالومنيوم ذات ابعاد (2 ملم) سمك وقطر (25 ملم)، وكانت تجارب الاستقطاب في مح | The objectives of the present project are to generate uniform melted layers, free of large second phases to assess the corrosion resistance of the laser treated surface in comparison with the untreated alloy. So disc samples of (7075, 6061 and 5083) aluminum alloys of 2 mm thickness and 25 mm diameter, have been prepared. Polarization tests were carried out in (M lab potentiostat / galvanostat) (Germany) at 298K temperature and (1.5, 2.5 and 3.5) % wt of NaCl solution. The experiments were carried out before and after laser surface melting by (Nd : YAG, MED - 810) pulse laser, system (Q - Switched Nd : YAG 1064/532nm). Before laser surface melting the results showed that the value of the corrosion current density obviously increases with increasing the concentration of NaCl from 1.5% to 3.5%. As well as higher Cl - ions concentration more negative pitting potential (Epit) of aluminum alloys and decrease in the electrochemical stability of aluminum. The corrosion rate for the specimen 7075 is larger than that of 6061 and 5083 aluminum alloys under the same conditions. So it means that the specimens 6061 and 5083 have high resistance to corrosion in NaCl solution After laser surface melting the results showed that the surface of aluminum alloys became more homogenous and pure after treatment.It was found that the corrosion current density decreases after Laser Surface melting at about three orders than that of untreated samples, therefore, the value of the corrosion rate of laser - treated alloy is smaller than that of the untreated. As well as the pitting corrosion potential after Laser Surface melting obviously shifted to more positive direction for all aluminum alloys in different concentrations of the NaCl solution.

تطبيق اللابفيو والخوارزمية الوراثية في السيطرة على مبادل حراري من نوع الصفائح Application of LabVIEW And Genetic Algorithm For Controlling of Plate Heat Exchanger

اسم المؤلف: ايمن فوزي زوين
اسم المشرف: زيدون محسن شكور
الموضوع العام: الهندسة الكيمياوية
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم دراسة السلوك الديناميكي لمبادل حراري من نوع الصفائح ( يتكون من 24 صفيحة ) والسيطرة عليه. الموديل النظري للمبادل طور بالاستناد على الموازنة الحرارية لصفائح المبادل.نتائج الموديل توضح السلوك الديناميكي للمبادل حيث تبين انه من الدرجة الاولى بالتقديم ((le | In this work the dynamic behavior of a plate heat exchanger (PHE) (consists of 24 plates) both experimentally and theoretically and the control of the system were studied. A theoretical model for the plate heat exchanger was developed based on the heat balance. A step change is carried in the hot water flow which is considered as a manipulated variable.The results of plate heat exchanger (PHE) showed that the dynamic behavior of plate heat exchanger in this work is dynamically as a first order lead and second order overdamped lag with a significant delay time as shown below : G(p)=(T ?_co (s))/(m ?_h (s) )= ((0.2645s+1.411) e^( - 5.63s))/(0.2156s^2+12.34s+1) The experimental heat transfer measurements of the plate heat exchanger (PHE) indicated that the overall heat transfer coefficient (U) is related to the water flow rate (m) by a correlation having the form : U = 10637 m0.7307 To verify the presented model, temperature control was applied theoretically and experimentally to the plate heat exchanger using conventional P, PI and PID controllers with tuning of control parameters by different methods; Ziegler - Nichols, Cohen - Coon and genetic algorithm to find the best values of proportional gain (Kc), integral time (?I) and derivative time (?D). The time domain specifications like rise time, settling time, overshoot and the performance indices, Integral Squared Error (ISE) and Integrated Time - Weighted Absolute Error (ITAE) were used to evaluate the performance of different control strategies. The PID controller gave better control results of temperature than other controllers, while Ziegler - Nichols tuning method gave better control results than Cohen - Coon. GA technique is the best method in simulation by compare with Cohen - Coon and Ziegler - Nichols methods. Therefore, GA method is suitable as best technique for systems which have shorter constant time.Cohen - Coon and Ziegler - Nichols methods were used in the experimental work to calculate the controller parameters, while GA method was not used in this stage.

تثبيط تاكل الحديد الكاربوني الواطئ في حامض الكبريتيك باستعمال كحول البولي فينيل ومستخلص نبات PIPER LONGUM Corrosion Inhibition of Low Carbon Steel In Sulfuric Acid By PVA And Piper Longum Extracts

اسم المؤلف: اياد بهاء الدين احمد
اسم المشرف: ماجد ابراهيم عبد الوهاب ابرائيل سركيس يارو
الموضوع العام: الهندسة الكيمياوية
السنة: 2014
الموضوع الدقيق: الهندسة الكيمياوية
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The inhibitive power of Polyvinyl Alcohol (PVA) and the synergistic effects added on the inhibition power of PVA by two types of Piper Longum (PL) Ethanol Extracts (PLEXT) were investigated toward the corrosion of carbon steel in (0.2N) H2SO4 solution in the temperature range (30 - 60?C) and PVA concentration range (150 - 2000 PPM).The corrosion rate measurements were carried out using the following two standard corrosion measurements techniques.1. Weight loss technique was applied on carbon steel plates to evaluate inhibition efficiency in presence and absence of these inhibitors.2. Electrochemical Techniques were used to validate and support inhibition efficiencies found in weight loss techniques.A detailed study of the experimental methods and results is reported for each test conducted.The weight loss results showed that PVA could serve as a corrosion inhibitor but its inhibition power was found to be low for the corrosion of carbon steel in the acidic media.It was shown that the inhibition efficiency for (PVA) decreased with increasing temperature at a given PVA concentration. On the other hand it was shown that at given temperature the inhibition efficiency of (PVA) was increased with increasing of PVA concentration until a PVA concentration of 2000 ppm PVA was reached then only a slight decrease in inhibition efficiency was observed when increasing PVA concentration further.The Maximum inhibition efficiency reached was about 71 % at 30?C & 2000 ppm (PVA) concentration, calculated by the weight loss techniques.In order to improve the inhibition efficiency of PVA, by adding 6 ml/l of ethanol extracts of piper longum (PL) to a liter of the acid solution in presence of concentrations of PVA 150,500,1000.1500, and 2000 ppm at temperatures (30,40,50, and 60?C) was investigated.Weight loss results showed a jump in inhibition efficiency (% IE) value of the modified inhibitor mixture compared with the presence of PVA alone at all (PVA) concentrations for temperature range considered in this investigation.This study demonstrated the extra inhibition power added by the (PL) fruit extracts to the organic polymer (PVA) used. Maximum inhibition efficiencies recorded were approximately 95% for Piper Longum Extract Number two (PLEXT2) at 30?C and 2000 ppm PVA.The kinetic and thermodynamic parameters regarding the adsorption process of inhibitors used was calculated.It was found that the changes corrosion rates correlates well with the Arrhenius equation in absence and presence of inhibitors.The Results showed that the adsorption of the polymer and the plant extract follows Langmuir adsorption isotherms and the adsorption of the inhibitor molecules on the metal surface is mainly physical, nevertheless the adsorption is believed to be slightly deviated from the Langmuir model at 30?C.Electrochemical analysis of the corrosion process of carbon steel in an electrochemical corrosion cell was investigated using 3 - Electrode corrosion cell coupled with a potentiostat interfaced with a computer which assisted polarization data interception and interpretation.Polarization technique was used to obtain polarization data which was recorded for carbon steel in 0.2N H2SO4 solutions in presence and absence of the inhibitors investigated. Electrochemical runs were done in the (PVA) concentrations of 150, 1000, and 2000 PPM and a temperatures of 30, 40, 50, and 60?C.Tafel slopes, Corrosion currents, and corrosion rates were calculated from polarization curves by Tafel extrapolation method. Results showed corrosion rate trends similar to findings by the weight loss method. It was indicated also that the corrosion of carbon steel in 0.2N H2SO4 is highly activity controlled.Results revealed that the inhibition action is occurring at both anodic and cathodic sites on the metal surface so that both corrosion reactions were affected, so that the composite inhibitor could be considered as mixed - type inhibitor.Electrochemical results confirmed that (PLEXT2) was more efficient as inhibition improvement additive to (PVA) than (PLEXT1) at all experimental conditions range encountered in this study.The highest inhibition efficiency recorded using Tafel polarization method was 83% obtained at 30?C and 2000 ppm of PVA with 6 ml/l PLEXT2.

تحضير الكاربون المنشط من نوى التمر باستخدام كاربونات البوتاسيوم كعامل منشط في ازالة صبغة المثيلين الزرقاء Preparation of Activated Carbon From Date Stones By K2Co3 Activation For Methylene Blue Dye Adsorption

اسم المؤلف: اسماء فاضل عباس
اسم المشرف: مثنى جبار احمد
الموضوع العام: الهندسة الكيمياوية
السنة: 2014
الموضوع الدقيق: الهندسة الكيمياوية
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Present study deals with the preparation of activated carbon (AC) from date stones by K2CO3 activation via microwave heating and the removal of methylene blue (MB) dye from aqueous solution by using such carbon as adsorbent. The influence of radiation time (4 - 12min), radiation power (540 - 700W) and impregnation ratio (0.5 - 2.5g/g) on the yield and MB uptake of such carbons were studied. Central composite design was used to determine the optimum preparation conditions and two quadratic models were developed to correlate the preparation variables for both responses.The optimum preparation conditions were reported as 8 min radiation time, 660 W radiation power and 1.5 g/g impregnation ratio resulting in 19.99% yield and 460.123 mg/g MB uptake. From the analysis of variance (ANOVA), it was found that the radiation time had the greatest effect on the yield while impregnation ratio had the greatest effect on MB uptake.The characteristics of AC were examined by pore structure analysis, scanning electron microscopy (SEM) and Fourier transforms infrared spectroscopy (FTIR). The BET surface area and total pore volume were indentified to be 1144.25 m²/g and 0.656 m³/g, respectively. Batch adsorption study was adopted to determine the experimental adsorption isotherm data of different initial concentration of MB (50 - 450 mg/l). The equilibrium data were analyzed using Langmuir, Freundlich and Sips isotherm models. The results showed that the experimental data were well fitted with sips isotherm with maximum monolayer adsorption capacity of 484.7 mg/g. Pseudo - First order, Pseudo - Second order, and intraparticle diffusion models were used to analyze experimental kinetics data with high correlation coefficient for Pseudo - second - order model.

ازالة الكادميوم من المياه الملوثة بالترسيب الكهروكيمياوي باستخدام حزمة من الانابيب الفولاذية متحدة المركز Removal of Cadmium From Wastewater By Electro - Deposition On Stainless Steel Concentric Tubes Bundle

اسم المؤلف: انس بديوي سلمان
اسم المشرف: عباس حميد سليمون بسمة عباس عبد المجيد
الموضوع العام: الهندسة الكيمياوية
الموضوع الدقيق: الهندسة الكيمياوية
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم دراسة انتقال الكتلة الخاص بايونات الكادميوم الثنائية الى سطح اسطوانة دوراة مصنوعة من مادة الفولاذ المقاوم للتاكل (كقطب كاثود) بواسطة قياس التيار المحدد لتفاعل اختزال ايونات الكادميوم الكاثودي في محلول كبريتات الصوديوم بتركيز مولار باستخدام خلية ثلاثية | 1 - Mass transfer of Cd+2 ions to a smooth stainless steel rotating cylinder electrode was studied by measuring the limiting current for the cathodic reduction of Cd+2 in 0.5 M sodium sulphate supporting electrolyte by three electrodes cell with stainless steel rotating cylinder electrode working in hydrodynamic voltammetry mode. The studied parameters were electrolyte pH (4, 5, 6 and 7), initial Cd+2 concentrations (50, 100, 200, 300 and 400 ppm) and rotation rates (100, 150, 200 and 250 rpm). Cadmium ions' reduction potential for mass transfer control conditions was found to be - 0.13 V. Diffusion coefficient was determined and correlated with the bulk concentration of Cd+2 in sodium sulphate solution. The increase in pH was found to enhance the mass transfer coefficient and this effect diminishes nearly at pH=7, and the experimental data were well fitted by an empirical dimensionless correlation among the Sherwood number, Reynolds number and Schmidt number. The obtained correlation was : Sh=0.047 ?Re?^0.769 ?Sc?^0.356 For (8015.519 < Re < 20587.07) Reduction potential obtained via the voltammograms constructed by the rotating cylinder cell was applied for the two pilot scale units in order to keep the process under mass transfer control conditions. Parameters studied in these units are : initial cadmium concentration, pH, and electrolyte flow rate. The first pilot scale unit was an electrochemical reactor with smooth stainless steel concentric tubes, and the second one was an electrochemical reactor with stainless steel mesh concentric cylinders.2 - For the stainless steel smooth concentric tubes cathode, mass transfer coefficient was calculated and correlated with initial concentration.Effect of pH on mass transfer coefficient was studied and correlated, and it was found that the effect of pH was found to be completely negligible at pH=7.On the other hand, effect of flow rate on mass transfer coefficient was studied and correlated. Performance of the reactor was analyzed by introducing figures of merit for fractional conversion, specific energy consumption, space time yield and normalizes space velocity. The experimental data were correlated in a dimensionless expression as flows : Sh=0.804?Re?^0.632 ?Sc?^(1/3) For 254 < Re < 1018.3 - For the stainless steel mesh concentric cylinders was adjusted to work under mass transfer control conditions by applying the reduction potential obtained in hydrodynamic voltammetry experiments.Effect of initial cadmium concentration, pH and solution flow rate was studied and analyzed. Mass transfer coefficient was correlated with these studied parameters.Similar to smooth cathode, the mesh cathode showed a negligible response to pH at pH=7.Noticeable enhancement in mass transfer coefficient was investigated by the action of flow rate, and the mass transfer coefficient was correlated with the solution flow rate.The mesh cathode showed a higher conversion than that adopted by the smooth cathode, and showed lower cumulative current efficiency than that of smooth cathode.Mesh cathode showed specific energy consumption, space time yield and normalized space velocity higher than that for the smooth cathode.Experimental data for the mesh reactor were correlated in a dimensionless relation as follows : Sh=1.898?Re?^0.514 ?Sc?^(1/3) For 235 < Re < 943 Cadmium ions reduction reaction was found to follow a first order reaction with respect to Cd+2 concentration, and reaction rate constant was predicted under different operating conditions.

تصميم تناسلي تكاملي تفاضلي مضبب للسيطرة على منظومة روبرت ذات ذراع مفرد متصل بمفصل مرن باستخدام تقنية البوابات المبرمجة Design of A Fuzzy - PID Controller For Single Link Flexible Joint Robot Using FPGA

اسم المؤلف: حسين عظيم عباس
اسم المشرف: اخلاص حميد كرم اقبال حسين علي
الموضوع العام: هندسة الحاسبات
السنة: 2014
الموضوع الدقيق: هندسة الحاسبات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: اثناء هذا العمل ستتم مناقشة مشكلة وجود المرونة في مفصل منظومة روبوت ذات ذراع مفرد متصل بمفصل مرن، حيث ان وجوده يسبب نمط من التذبذبات الغير مرغوب بها في استجابة النظام، والتي قد تؤدي الى تدهور اداء النظام وعدم استقرار الاستجابة. ايضا تم اقتراح استخدام مسي | In this work, we have discussed the joint flexibility that exists in a single link flexible joint robotic system which causes poorly damped oscillations thatmay degrade system performance. A fuzzy - PID (Proportional, Integral, Derivative) controller hav

تحسين اداء بروتوكول لشبكات الاستشعار اللاسلكية اللاارادية Performance Enhancement of Routiing Protocol For Autonomic Wireless Sensor Networks

اسم المؤلف: سرى فوزي اسماعيل
اسم المشرف: فراس علي صابر
الموضوع العام: هندسة الحاسبات
السنة: 2014
الموضوع الدقيق: هندسة الحاسبات
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

ملاحة وتجنب العوائق للربوت المتنقل مبنية على اساس المنطق الضبابي Fuzzy Based Obstacle Avoidance And Navigation of Mobile Robot

اسم المؤلف: عبد الكريم عبد الهادي عبد الكريم
الموضوع العام: هندسة الحاسبات
السنة: 2014
الموضوع الدقيق: هندسة الحاسبات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: هناك جانبان لهذه الاطروحة الجانب الاول هو الجانب النظري الذي يتضمن تصميم مسيطر المنطق الضبابي للسيطرة على حركة الروبوت المتنقل. تم استخدام خوارزمية سرب الجسيمات الامثل (Particle Swarm Optimization) لتحسين مسيطر المنطق الضبابي حيث استخدمت لضبط دوال الانتما | Two aspects are considered in this thesis, the first one is theoretical aspect which consist of the design of fuzzy logic controller to control the motion of mobile robot. Particles Swarm Optimization (PSO) algorithm is used to optimize the fuzzy logic co

مصادقة الرسائل وتشفير رسالة سمز لتطبيق الروبوت Message Authentication And Encryption of Sms Message For Android Application

اسم المؤلف: فاطمة اسعد حسن الحبوبي
اسم المشرف: Shaimaa Hameed Hassan A. Jeiad
الموضوع العام: هندسة الحاسبات
السنة: 2014
الموضوع الدقيق: هندسة الحاسبات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The Short Message Service (SMS) is a text based service provided by Global System for Mobile communications (GSM). SMS is one of the most widely, simple and cost effective means for communication between two persons or a group of them.In this thesis a se

تصميم وبناء نظام مراقبة الكتروني للعناية الصحية Design And Lmplementation of Monitoring System For EHealTh Care Applications

اسم المؤلف: عبد الله علي جواد
اسم المشرف: محمد نجم عبد الله
الموضوع العام: هندسة الحاسبات
السنة: 2014
الموضوع الدقيق: هندسة الحاسبات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: اصبح نظام مراقبة الصحة الالكترونية جزء ا مھم ا من الحياة اليومية في السنوات الاخيرة. ان التطور الحاصل في الھواتف المحمولة وغيرھا من الاجھزة المحمولة اعطى نظام مراقبة الصحة الالكتروني امكانية استخدام انواع مختلفة من الشبكات. ان نظام مراقبة الصحة الالكترو | E - Health Monitoring Systems (EHMS) have become very important part of our life in recent years. The development of mobile phones and other handheld devices have given the ability to EHMS for using different types of networks. The EHMS consists of many s

تقنيات الاستنباط للبيانات المكانية باستخدام المحلل الجيواحصائي في نظم المعلومات الجغرافية Interpolation Techniques of Spatial Data Using Geostatistical Analyst In GIS

اسم المؤلف: غصون عيدان عرب ناصر
اسم المشرف: صالح مهدي القرعاوي حسين زيدان علي
الموضوع العام: هندسة الحاسبات
السنة: 2014
الموضوع الدقيق: هندسة الحاسبات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: لقد اصبحت التغييرات المناخية في البيئة العالمية مصدر قلق في جميع انحاء العالم في السنوات الاخيرة.وبما ان هطول الامطار يعتبر عاملا مناخيا مهما، فان دراسة انماطه الزمانية والمكانية مهم بالنسبة للباحثين الذين يعملون في العديد من المجالات المتفاعلة في اطار ب | Global environment change has become a worldwide concern in recent years. Rainfall is an important climatological parameter, which is useful for researchers working in many disciplines. In this thesis, spatial interpolation techniques were implemented in

تصميم وتنفيذ نظام لاسلكي لمراقبة درجة الحرارة باستخدام الزيجبي ZigBee Design And Implementation of A Wireless Temperature Monitoring System Using Zigbee

اسم المؤلف: علي حمید توفیق محسن
الموضوع العام: هندسة الحاسبات
السنة: 2014
الموضوع الدقيق: هندسة الحاسبات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: شبكة الاستشعار اللاسلكية (WSN) ھي عبارة عن مجموعة من العقد يتم تنظيمھا في شبكة تعاونية. لدى كل عقدة في تلك الشبكة قدرة على المعالجة، وتحتوي على ذاكرة، ولديھا جھاز ارسال واستقبال لاسلكي، ولديھا مصدر للطاقة، وتستوعب مختلف اجھزة الاستشعار والمحركات. النظام | A wireless sensor network (WSN) is a collection of nodes organized into a cooperative network. Each node consists of processing capability, memory, RF transceiver, power source, and accommodates various sensors and actuators. The proposed system in this

ادارة المرور في شبكات التحسس الاسلكية بالاعتماد على خوارزميات المراقبة الذكي Traffic Management In Wireless Sensor Network Based on Intelligent Monitoring Algorithms

اسم المؤلف: زينب غازي فيصل
اسم المشرف: ناديه عدنان شلتاغ
الموضوع العام: هندسة الحاسبات
السنة: 2014
الموضوع الدقيق: هندسة الحاسبات
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: طبيعة الحدث في شبكات الاستشعار اللاسلكية يؤدي الى حركة المرور المفاجئ في الشبكة ؛ ترسل العقد في مجال الرصد حزم البيانات الخاصة بها فقط في حاله حدوث احداث معينة. ان هذا الكم الهائل من حزم البيانات يمكن ان يؤدي بسهولة الى الاختناق, بسبب تجاوز سعة المخزن الم | The event - driven nature of Wireless Sensor Networks (WSNs) leads to sudden network traffic; the nodes in the monitoring field send data packets to the sink only upon the observation of specific events. This huge amount of data packets can easily lead to

استخراج الطرق اعتمادا على تقنية الافاعي المنطادية Road Extraction Based on Balloon Snakes Technique

اسم المؤلف: فراس فاهم عبد الحسن الصكبان
اسم المشرف: محمد احمد المشهداني
الموضوع العام: هندسة الحاسبات
السنة: 2008
الموضوع الدقيق: هندسة الحاسبات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ان استخراج الطرق من الصور الجوية وصور الاقمار الصناعية يؤدي دورا مهما في رسم الخرائط وتخطيط يحتاج الى تحديث سريع للطرق (GIS) شبكات الطرق الجديدة. ان التطور الحالي في نظام المعلومات الجغرافية في كل ارجاء الكوكب.خلال العقود الاخيرة طورت الكثير من الطرق الا | The extraction of roads from aerial and satellite images is an important task within cartography and planning of new road networks. The recent developments of the Geographic Information System (GIS) require rapid updates of roads all over the planet. Over

التنقل المتكيف لخوارزمية موازنة الحمل للتطور طويل الامد Adaptive Handovers Ffor Lte Load Balancing Algorithm

اسم المؤلف: نمارق سامي جاسم
اسم المشرف: فراس علي صابر
الموضوع العام: هندسة الحاسبات
السنة: 2014
الموضوع الدقيق: هندسة الحاسبات
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: لقد تطو رت الاتصالات المتنقلة بشكل كبير في السنوات الاخيرة, وتسارعت بسبب زيادة استخدام الهواتف الذكية وتطبيقاتها. ولكن الزيادة الهائلة في الاستخدام والطلب على خدمات ذات ( جودة اعلى فرض الكثير من التحديات على الشبكات اللاسلكية. لذلك, مشروع شراكة الجيل 1 1 | In recent years, mobile communication has evolved drastically, which is further accelerated by the increase in usage of smart phones and their applications. But the huge increasing in usage and demand on higher quality services poses a lot of challenges t

شبكة متحسسات لاسلكية ذكية لادارة انظمة الري بالتنقيط والرش Intelligent Wireless Sensor Network For Management of Drip And Sprinkler Irrigation Systems

اسم المؤلف: امثال خليل موسى
اسم المشرف: محمد نجم عبد الله مؤيد صادق كروك
الموضوع العام: هندسة الحاسبات
السنة: 2014
الموضوع الدقيق: هندسة الحاسبات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: This thesis involves investigation for recent technologies used for monitoring and controlling irrigation systems. Besides, it investigates recent existing WSN technologies and their suitability for agricultural applications so as to adopt the most approp

تحديد مواقع العقد في شبكات الاستشعار اللاسلكية لاستكشاف النفط Wireless Sensor Network Nodes Localization For Oil Exploration

اسم المؤلف: ماجد عيدان دبخ
اسم المشرف: حامد محمد علي عبد الحسين
الموضوع العام: هندسة الحاسبات
السنة: 2014
الموضوع الدقيق: هندسة الحاسبات
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يستخدم في التنقيب عن النفط والغاز انواع مختلفة من عقد الاستشعار (اجهزة الاستقبال). بالتالي, الموقع الدقيق لعقد الاستشعار له تاثير كبير في استكشاف الحقول النفطية. في النظام السلكي لتحدي د مواق ع العقد، والذي يضم اثنين من المشكلات (GPS) يستخدم نظام تحديد | In oil and gas exploration various sensor node (receivers) types are used. Consequently, the accurate position of the sensor node has a great impact inthe field of oil exploration. In wired system, Global Positioning System (GPS) is used for node locali

تحقيق وتنفيذ منظومة التشفير المتقدم القياسي باعتماد مصفوفة البوابات المنطقية المبرمجة حقليا Implementation of Aes Algorithm Based on FPGA Platform

اسم المؤلف: رلا سامي خضير
اسم المشرف: محمد نجم عبد الله مهند كاظم صابر
الموضوع العام: هندسة الحاسبات
السنة: 2014
الموضوع الدقيق: هندسة الحاسبات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Cryptography plays main role in information security, which is used to protect transformation of electronic data. Advanced Encryption Standard (AES) is symmetric block cipher that includes generation of ciphers for encryption and inverse ciphers for decry

تصميم ومحاكاة نظام سيطرة والنظم ضبابي متعدد الاختيار لتطبيق شبكة متحسس البيت الزجاجي Design And Simulation of Multi Choice Fuzzy Control System For Greenhouse Sensor Network Application

اسم المؤلف: قيس جبر صبر الجواري
اسم المشرف: قيس سعيد اسماعيل
الموضوع العام: هندسة السيطرة والنظم
السنة: 2014
الموضوع الدقيق: هندسة السيطرة والنظم
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: This thesis proposes a multi - choice fuzzy control system with three modes of operation to control the temperature and humidity of the Greenhouse (GH) with system monitoring ability. The system design consists of two parts, the first part : designing a f

التاثير المتبادل بين المرشح المضبب ومرشح كالمان للتقليل من الضوضاء المختلطة في الصور Combination of Fuzzy - Kalman Filters To Reduce The Mixed Noise From Images

اسم المؤلف: محمد شاكر محمد النجار
اسم المشرف: اقبال حسين علي اخلاص حميد كرم
الموضوع العام: هندسة الحاسبات
السنة: 2014
الموضوع الدقيق: هندسة الحاسبات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: هذا العمل يبحث في تطبيقات تقنيتي مرشح كالمان ومرشح المنطق المضبب لازالة الضوضاء المختلطة ((Gaussian, salt and pepper من الصور الرمادية والملونة. حيث ان ترشيح الصور المشوشة لها اهمية كبيرة في مجالات الحياة العملية مثل الطب, انتاج الفيديو, التصوير, الاستشع | This work deals with the application of Kalman filtering techniques and fuzzy logic filtering due to the fine results it gives for denoising mixed noise (Gaussian, salt and peppers) in gray and color images, where image filtering has great importance in w

مطابقة الخطوط عبر الصور الانعكاسية الانكسارية Line Matching Across Catadioptric Images

اسم المؤلف: هالة عبد العظيم نعمان الطائي
اسم المشرف: اقبال حسين علي ظافر رافع زغير الواوي
الموضوع العام: هندسة الحاسبات
السنة: 2014
الموضوع الدقيق: هندسة الحاسبات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The 3D techniques today have a wide range of applications, especially in medical and art, it is one of the most promising technologies and important for the future especially in self - drive cars. The error in disparity map and highly computational cost a

تصميم وتنفيذ ذراع انسان الي لحركة الانسان Design And Impelementation of Robotic Manipulator For Human Movements

اسم المؤلف: احمد فاضل شنته
اسم المشرف: Mohammed Zeki AL Faiz
الموضوع العام: هندسة الحاسبات
السنة: 2014
الموضوع الدقيق: هندسة الحاسبات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Most human interactions with the environment depend on our ability to navigate freely and to use our hands and arms to manipulate objects. An ideal interface for Humanoid Robotic Operation (HRO) will be person - independent, inexpensive, easy to use, requ

تجميع شبكة المحمول المخصص اعتمادا على نظام هجين ظبابي - وراثي Manet Clustering Based on Hybrid Fuzzy - Genetic System

اسم المؤلف: رؤى عدنان صبري صالح
اسم المشرف: محمد نجم عبد الله محمود زكي عبد الله
الموضوع العام: هندسة الحاسبات
السنة: 2014
الموضوع الدقيق: هندسة الحاسبات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ان الطلب على شبكات التنظيم الذاتي، الشفاء الذاتي دون تدخل من مركزية او بنية تحتية وضعت من قبل / سلطة لمتابعة الزيادة في استخدام الشبكات اللاسلكية. علاوة على ذلك، في شبكة المحمول المخصص ) MANET ( يعتبر اختيار رئيس المجموعة تحديا هاما لا سيما في البنيه الح | The demand for self organizing, self healing networks without the interference of centralized or pre - established infrastructure/authority has been adopted to follow the increase in usage of wireless networks. Furthermore, in Mobile Ad hoc Network (MANET

نظام مراقبة قليل القدرة يعتمد على شبكات المتحسسات اللاسلكية Low Power Monitoring System Based on Wireless Sensor Network

اسم المؤلف: قصي شهاب حمد
اسم المشرف: صالح مهدي القرعاوي مؤيد صادق كروك
الموضوع العام: هندسة الحاسبات
السنة: 2014
الموضوع الدقيق: هندسة الحاسبات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تعتبر انظمة المراقبة وكشف التطفل شرط مهم لامن الشركات والمؤسسات وحتى بالنسبة للمستخدم العادي. اعتمدت الانواع السابقة من انظمة المراقبة على البشر لادارة عملية المراقبة يدويا. استخدمت تكنولوجيا المتحسسات اللاسلكية في الوقت الحاضر في انظمة المراقبة على مدى و| Monitoring and intruder detection systems have been considered as the most important security condition for companies, institutions and even for the individual users. The old versions of the above systems depend on humans to manage the monitoring manually

محاكاة التعريف غير المحدد والسيطرة لروبوت سكارا باستخدام الشبكات العصبية المعدلة Simulation of Non - Parametric Identification And Control of Scara Robot Using Modified Neural Networks

اسم المؤلف: دنيا عبد الكريم عبد القادر
اسم المشرف: قيس سعيد الصباغ نادية عدنان شلتاغ
الموضوع العام: هندسة الحاسبات
السنة: 2011
الموضوع الدقيق: هندسة الحاسبات
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The control of Multi - Input - Multi - Output (MIMO) plant is difficult problem when the plant is nonlinear and there are dynamic interactions between the plant variables. A good example of such a plant is an articulated robot with two or more joints.Con

تطبيق متوازي لخوارزمية باستخدام RSA المعالجات المتعددة النواة ووحدة معالجة الرسومات A Multithreading Implementation of RSA Algorithm on Multicores And GPUS

اسم المؤلف: هبة محمد فاضل
اسم المشرف: محمد عصام يونس
الموضوع العام: هندسة السيطرة والنظم
السنة: 2014
الموضوع الدقيق: هندسة السيطرة والنظم
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تعرف خوارزميات المفتاح العام بانها ابطا من نظيرتها المفتاح الخاص في مجال خوارزميات التشفير وذلك بسبب ان الحسابات الرياضية عنصر اساسي فيها. تعد خوارزمية من خوارزميات المفتاح العام الاكثر شيوعا واستخداما. بناءا على ذلك، يعد تحسين سرعة (RSA) موضوع بحث غاية ف | Public key algorithms are known to be slower than private key alternatives in the area of cryptographic algorithms due to their basis in modular arithmetic. The most public key algorithm widely used is the RSA. Therefore, how to enhance the speed of RSA a

تصميم وتنفيذ نظام مراقبة FECG عن بعد بالاعتماد على موقع الكتروني Design And Implemetation of Remote Web - Based Fetal Electrocardiogram (fecg) Monitoring System

اسم المؤلف: نور عبد الخالق زغير القريشي
اسم المشرف: صالح مهدي القرعاوي مؤيد صادق كروك
الموضوع العام: هندسة الحاسبات
السنة: 2014
الموضوع الدقيق: هندسة الحاسبات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Recently, healthcare monitoring systems have utilized the modern wireless networks and internet technologies. One of the most developed applications in the healthcare monitoring systems is the fetal heartbeat detection. Obtaining fetal heartbeat has becom

مصادقة المستخدم بالاعتماد على الميزات الديناميكية لضربات المفاتيح باستخدام الشبكة العصبية وطريقة تحليل المكونات الرئيسية User Authentication Based on Keystroke Dynamics Features Using NN And PCA

اسم المؤلف: مينا خضر عبيد
اسم المشرف: شيماء حميد شاكر رياض جبار سوداني
الموضوع العام: هندسة الحاسبات
السنة: 2014
الموضوع الدقيق: هندسة الحاسبات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تعتبر ديناميات ضربة المفتاح خيارا جيدا للمصادقة على المستخدم بدلا من المصادقة المعتمدة على كلمة المرور التقليدية؛ كلمات السر هي عرضة لهجمات كلمة المرور. ديناميات المفاتيح تعتمد على ميزات التوقيت التي تستخرج عندما يقوم المستخدم بالكتابة باستخدام لوحة المفا | As a behavioral biometrics, Keystroke dynamics are considered a good choice for user authentication rather than the traditional password - based authentication; passwords are vulnerable to password attacks. Keystroke dynamics depend on the timing features

طريقة محدثة لعملية تمييز الصوت A Modified Approach For The Sound Recognition Process

اسم المؤلف: مروة فاضل جاسم
اسم المشرف: ازاد رحيم كريم
الموضوع العام: هندسة الحاسبات
السنة: 2014
الموضوع الدقيق: هندسة الحاسبات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The issue of discrimination of the sounds is one of the very important issues and has many applications in the field of identifying the sources of the sounds. So there are a lot of researches nowadays that serve this subject and are all looking for the be

تمييز الغير مباشر للحروف اليدوية بواسطة الشبكات العصبية اعتمادا على عدة خوارزميات لاستخلاص الخصائص Offline Hand Written Letter Recognition Using Neural Networks Based on Multiple Feature Extraction Algorithms

اسم المؤلف: مريم خلف كاظم
اسم المشرف: باسم عبد الباقي جمعة اياد غازي ناصر
الموضوع العام: هندسة الحاسبات
السنة: 2014
الموضوع الدقيق: هندسة الحاسبات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ھو احد حقول البحث في تمييز الانماط والذكاء الاصطناعي. نظام (LR) تمييز الحروف يمكنك من تحويل كتاب او مقالة في مجلة الى ملف في الحاسوب كنسخة الالكترونية، ومن ثم LR تحرير الملف باستخدام محرر نص مثل معالج النصوص. الاسلوب الاكثر شيوع التعليم الشبكة وھذه الخوا | Letter recognition (LR) is a field of research in pattern recognition, artificial intelligence and machine vision. A LR system is used to transform a scanned book or magazine article into an editable text form. In this work, letter recognition using Arti

تصميم وتنفيذ خوارزمية توجيه ذكية لشبكات الحزم ذات النطاق الواسع Design And Implementation An Intelligent Routing Algorithm For Large Scale Packet Networks

اسم المؤلف: احمد ناهض حمزة
اسم المشرف: منى محمد جواد محمود زكي عبد الله
الموضوع العام: هندسة الحاسبات
السنة: 2014
الموضوع الدقيق: هندسة الحاسبات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Routing algorithms are the key elements in determining the network performance. Therefore, in this thesis a model of logical topologies in the software has been proposed to examine the performance of the logical topologies and their routing algorithms for

تخمين وازالة الضوضاء من الصور الملونة بالاعتماد على المنطق المضبب والتمثيل البياني Color Image Noise Estimation And Removing Based on Fuzzy Logic And Histogram

اسم المؤلف: عادل جلال يوسف
اسم المشرف: منى محمد جواد اقبال حسين علي
الموضوع العام: هندسة الحاسبات
السنة: 2014
الموضوع الدقيق: هندسة الحاسبات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تكون الصورة المراقبة في العديد من تطبيقات معالجة الصور الرقمية, ملوثة بسبب الضوضاء الذي يحدث اثناء اكتساب او ارسال الصور. حيث ان الضوضاء يقلل من جودة الصور ويؤدي الى نتائج غير مرغوب بها في المراحل المتعاقبة من معالجة الصور (مثل التقطيع, تميز الشكل, التحسي | In many of digital image processing applications, observed image is often corrupted by noise which may arise during image acquisition or image transmission. Noise reduces image quality and leads to unwanted results of subsequent stages of the image proces

تصميم تقسيم مساحة نظام الارسال الضوئي لنظم الاتصالات Design And Implementation Of Optical Space Division Multiplexer For Tera (B/S) Communication Systems

اسم المؤلف: مصدق ماهر عبد الزهرة
اسم المشرف: ابراهيم عبد الله حمزة الشمري
السنة: 2017
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: اتصالات الالياف البصرية هي العمود الفقري للبنية التحتية للاتصالات السلكية واللاسلكية التي تدعم شبكة الانترنت. النظام الاحادي الالياف المستخدم لنقل البينات لم يعد يلبي طلب الحصول على القدرة العالية والمتنامية بشكل مستمر. هناك العديد من الطرق الممكنة لزياد | Optical fiber communication system is considered as the backbone for the infrastructure of telecommunications that handles the internet. The exponentially growing capacity is no longer satisfied by using transmission of single mode fiber. There are several possible methods for increasing transmission capacity over fixed bandwidth. These include mix many signals with optical - carrier onto a one optical fiber by achieving various wavelengths, modulation employing different amplitude levels, and two orthogonal subcarriers and polarization. An extra dimension that a fiber can offer for achieving more information is space.This project demonstrates simulation systems for Space Division Multiplexing (SDM) transmission system using Few - Mode Fiber (FMF). Polarization division multiplexing (PDM) and Dense Wavelength Division Multiplexing (DWDM) techniques are also used in this system to increase total system data rate. For the ultra - high capacity need of SDM, Few Mode Fiber (FMF) was proposed as SDM best technology for obtaining ultra - high bit rate systems with long haul transmission. Inter - mode losses that appears in higher - order - modes was the most problem to be resolved. In this thesis, the description and design of three SDM systems were explored by using both QPSK and 16QAM modulation formats : single channel SDM system with PDM technique, 8 - DWDM channels over 7 modes SDM/PDM system, and 16 - DWDM channels over 10 modes SDM/PDM system proposed as future of ultra - high capacity optical system.By using 16QAM format and bit rate per channel of 40Gb/s, the maximum long reach of our designed single channel SDM/PDM system is 1020Km. A transmission reach of 760Km was achieved for 8 - WDM - 7modes - SDM/PDM system and 260 Km for 16DWDM - 10modes - SDM/PDM. At QPSK modulation format the maximum demonstrated reach was 1460 Km for single channel SDM/PDM system. A long - haul transmission of 1080 Km was recorded for 8 - WDM channels - 7modes - SDM/PDM system and 510 Km for 16 - DWDM channels - 10modes - SDM/PDM system.The total bit rate of single channel - 3modes SDM/PDM system was 240G/s at 40Gb/s bit rate per channel. The total bit rate was achieved by using 8 - DWDM channels - 7modes SDM/PDM system is 4.48 Tb/s at 40Gb/s. The highest bit rate was achieved by using 16DWDMchannels - 10modes SDM/PDM system so that the total achieved bit rate is nearly 12.8Tb/s.Chromatic Dispersion (CD) compensator using Digital Signal Processing (DSP) was proposed to compensate chromatic dispersion losses. Frequency and phase estimators were proposed in the designed systems to remove frequency offset and phase change by using Viterbi and Viterbi algorithms.Adaptive MIMO equalizer using constant modulus algorithms was proposed to compensate deferential group delay, polarization mode dispersion, and other losses simultaneously. Numerical results demonstrated that the methods are very effective in compensating the narrow band filtering and are very robust to channel estimation noise.The demonstrated systems were designed and tested by using (VPI transmission maker v.9.5) powerful software package.SDM techniques provided us with an important source to obtain more system flexibility, scalability, and capacity.

تصميم مضاعف تناظري خطي محسن بنطاق واسع يعمل باربعة ارباع Design Of Improved Wideband Linear Four Quadrant Analog Multiplier

اسم المؤلف: رسل صلاح خضير
اسم المشرف: عبد الكريم مخيف عبيس
السنة: 2017
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: استخدمت المضاعفات التناظرية على نطاق واسع في دوائر الاتصالات والشبكات العصبية ككاشفات للطور ومضاعفات للتردد ودوائر لمزج الاشارات والتضمين وفك التضمين. في التطبيقات التقليدية مثل دوائرالتضمين تعتبر ترددات التشغيل والسلوك الخطي للانظمة والمديات المسموح بها | Analog multipliers have been widely exploited in communication circuitries, phase detectors, neural networks, frequency multipliers, mixers, and modulation and demodulation circuits. In conventional applications, such as modulation circuits, the linearity, frequency of operation, and input voltage ranges are issues of great importance for multipliers. This work targeted these issues through the design of two types of four quadrant analog multipliers operating in wideband frequency ranges and having very high linearity with input and output voltage ranges of ±10V.The first wideband four - quadrant analog multiplier is designed using wideband squaring and operational amplifier (OPAMP) circuits. The wideband OPAMP is designed using 10 NMOS transistors based on 0.35 µm NMOS technology with supply voltages of ?12V. The wideband OPAMP has exhibited an open loop voltage gain of 3336545. The squaring circuit is built using two NMOS transistors and two wideband OPAMPs. The first wideband multiplier is built using two identical squaring circuits, two difference amplifiers, and one summing amplifier. It is characterized by high input - output linearity range of - 10 V to +10 V for both inputs, ±10 V input and output voltage ranges, and cutoff frequency of about 5 GHz. The second wideband four quadrant analog multiplier is designed using NPN bipolar junction transistors. It is built with two main circuits, which are the multiplier cell and the output circuit. The multiplier cell is built using a modified Gilbert multiplier, while the output circuit is a high gain circuit designed for changing the differential output of the multiplier cell to a single output having a voltage range of ±10 V. The multiplier circuit is designed with supply voltages of ?12 V. It is characterized by high input - output linearity range of - 10 V to +10 V for both inputs, ±10 V input and output voltage ranges, and cutoff frequency of about 1 GHz.Both multipliers are designed and tested on PSpice in ORCAD / Version 16.6.

بناء معيد ترميز تكراري شبه مثالي للاشارات المرمزة المعتمدة على مخطط تانر Implementation Of Modified Suboptimal Iterative Decoding For Tanner - Graph Based Coded Signals

اسم المؤلف: محمد ثامر نصر
اسم المشرف: احمد عبد الكاظم حمد
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: في هذا العمل, تم اقتراح خوارزميتين لتحسين اداء معيد الترميز التكراري التجميعي. الاول انجز باضافة رموز ارشاد بين سيل البيانات التي تدخل الى المرمز. في هذه الطريقة, رموزالارشاد ترمز مع البيانات المدخلة (رموز الارشاد المرمزه او الداخليه) مقارنة بالطريقة الاع | In this work, two algorithms were suggested in order to improve the performance of systematic RA decoding. The first one was accomplished by the insertion of pilot symbols between the data stream that entering the encoder. In this way the pilot symbols are encoded along with the input data (encoded or internal pilots) in contrast to the usual way where pilots are inserted after encoding (unencoded or external pilots). The positions where pilots should be inserted are chosen in such a way that to improve the minimum Hamming distance and/or to reduce the error coefficients of the code. Moreover, the known pilots have higher reliability than data and can significantly improve the initial decoding.The second proposed algorithm includes the utilization of the inserted pilots to estimate scaling (correction) factors. Two - dimensional (2D) correction system was suggested in order to enhance the performance of traditional Minimum - Sum (MS) decoding of regular RA codes. By calculating the mean square difference (MSD) between the values of received pilots and the a - posteriori data of bit and check node related to them, which are created by the MS decoder, an adaptive method can be achieved for getting the correction factors.Since encoded pilots in systematic RA code are embedded in data, it is possible to puncture all or part of them to increase the code rate. The pilots still have their effect on increasing the minimum Hamming distance.Extensive simulation tests reveal that the suggested quasi - optimal algorithms supply error performance be able to compare as Sum - Product (SP) decoding whilst maintain less complexity. Practical experiments are carried out by utilizing the capability of data acquisition toolbox supported by MATLAB to provide a hardware interface with the computer sound card. Here, the sound card plays the role of ADC and DAC converter in the physical layer. A different graphical user interfaces (GUI) are designed for the transmitting and receiving terminals to facilitate the selection of different code options. Signals are transmitted over wireless channel using a 2.4 GHz band indoor audio tranceiver. According to the aquired results, the modified coding system outperforms the original one when it is tested over AWGN and fading channels. An improvement may be realized about 1.5 dB and 1.3 dB at BER=?10?^( - 5) for punctured and unpunctured systematic (50,35,3,7) code with adaptive scaling, with three encoded pilots over AWGN channel and about 3.4 dB and 3.3 dB at BER=?10?^( - 4) for punctured and unpunctured systematic (50,35,3,7) code with constant scaling, with two encoded pilots over fading channel.
1 ... 594 595 596 597 598 ... 826