عرض: 25 50 75 100 النتائج

نتائج البحث: 100 من أصل 122,441

تحديد حجم الجسيمة وانفعال الشبيكة من خلال تحليل توسيع الذروة لحيود الاشعة السينية لجسيمات اوكسيد الزنك النانوية Restriction of Particle Size and Lattice Strain through X_Ray Diffraction Peak Broadening Analysis of Zinc Oxide Nano_Particles

اسم المؤلف: احمد علاء احسان
اسم المشرف: خالد هلال حربي
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الدراسة تم تحديد حجم البلرة وانفعال الشبيكة لجسيمات اوكسيد الزنك النانوية باستخدام طريقتي التباين والعرض المتكامل ، واستخدمت ايضا بعض الطرق الاخرى مثل شيرر ويليامسون - هال لحساب المعلمات اعلاه. ثم تحسب كثافة الانخلاع ، مساحة السطح ودرست سلوك حجم البلرة انفعال الشبيكة مع درجات حرارة مختلفة باستخدام طريقة التباين. تم في هذه الدراسة تطوير طريقة التباين من خلال تقديم ثلاثة نماذج جديدة هي نموذج التباين التشوه المتماثل (UDVM),نموذج التباين اجهاد التشوه المتماثل (UDSVM) ونموذج التباين كثافة الطاقة التشوه المتماثل (UDEDVM) لتحديد المعلمات الشبيكة مثل حجم البلرة ، انفعال الشبيكة ، والاجهاد، وكثافة الطاقة للمرة الاولى. في طريقة التباين حسبنا قيم حجم البلرة ومربع متوسط الانفعال هي (22.276 nm) و(0.133473 x 10 - 3) على التوالي, ثم حسبنا قيم حجم البلرة وانفعال الشبيكة هي (22.276 nm) و(14.47962 x 10 - 3) على التوالي بواسطة استخدام , UDVM قيم كل من حجم البلرة, الاجهاد وانفعال الشبيكة (22.276 nm), (3.7266 x 10 - 3 TPa) و(14.48006 x 10 - 3) التوالي بواسطة استخدام ,UDSVM قيم كل من حجم البلرة, كثافة الطاقة , انفعال الشبيكة والاجهاد (22.276 nm), (21689.7 KJ/m3) , (14.48024 x 10 - 3) و(2.9957 x 10 - 3 TPa) التوالي بواسطة استخدام .UDEDVM في طريقة العرض المتكامل حسبنا قيم حجم البلرة وانفعال الشبيكة هي (25.126 nm) و(2.443 x 10 - 3) على التوالي. في طرق اخرى مثل شيرار (Scherrer) التي تعطي قيمة حجم البلرة هي (17.622 nm) وقيمة انفعال الشبيكة هي (6.0362 x 10 - 3), بينما ويليمسن - هال (Williamson - Hall) التي تعطي قيمة حجم البلرة هي (22.063 nm) وقيمة انفعال الشبيكة هي (1.19225 x 10 - 3), حددنا قيمة كثافة الانخلاع والتي هي (7.912 x 1015 lines/m2) بواسطة استخدام نتائج طريقة التباين وحددنا قيمة مساحة السطح والتي هي (4.801 x 104 m2/g). وقد استخدمت طريقة التباين لتحديد التغير في قيم حجم البلرة وو مربع متوسط الانفعال في درجات حرارة مختلفة (80 ، 300 ، 350 و400) درجة مئوية. | The lattice strain and crystallite size of ZnO nanoparticles have been determined by using variance and integral breadth methods, and also used some other methods such as Scherrer and Williamson - Hall to calculate above parameters. Then calculated dislocation density, surface area and studied the behavior of crystallite size and lattice strain at different temperatures by using variance method. In this study the variance method have been developed by presenting three new models (The Uniform Deformation Variance Model UDVM, The Uniform Deformation stress Variance Model UDSVM and The Uniform Deformation Energy Density of Variance Model UDEDVM) to determine lattice parameters such as particle size, microstrain, energy density and stress for the first time. By variance method we have calculated the values of crystallite size and mean square strain are (22.276 nm) and (0.133473 x 10 - 3) respectively. Then we have calculated the values of crystallite size is (22.276 nm) and lattice strain is (14.47962 x 10 - 3) by using UDVM, the values of crystallite size is (22.276 nm), stress is (3.7266 x 10 - 3 TPa) and lattice strain is (14.48006 x 10 - 3) by using UDSVM and the values of crystallite size, stress, energy density and lattice strain (22.276 nm), (2.9957 x 10 - 3 TPa), (21689.7 KJ/m3) and (14.48024 x 10 - 3) respectively by using UDEDVM. In integral breadth method we have calculated the values of crystallite size and lattice strain are (25.126 nm) and (2.443 x 10 - 3) respectively. The other methods such as Scherrer which gives the value of crystallite size is (17.622 nm) and lattice strain is (6.0362 x 10 - 3), while the Williamson - Hall gives the crystallite size is (22.063 nm) and the lattice strain is (1.19225 x 10 - 3). We have determined the value of dislocation density which it is (7.912 x 1015 lines /m2 ) by using the results of variance method and determined the value of surface area which it is (4.801 x 104 m2/g) by using the results of variance method. Have been used variance method to determine the change in values of crystallite size and mean square strain at different temperatures (80, 300, 350 and 400) oC

الخصائص الفيزيائية الضوئية وانتقال الطاقة لاغشية بولي مثيل ميثا اكريليت المطعمة بصبغتين ليزريتين كومارين 102 ورودامين B Photophysical Properties and Energy Transfer of Two Laser Dyes (Coumarin 102 and Rhodamine B) Doped PMMA Films

اسم المؤلف: احمد عامر ناصر
اسم المشرف: محاسن فاضل هادي الكاظمي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الالياف الضوئية
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم تقسيم هذا البحث على ثلاثة اجزاء : الجزء الاول تضمن دراسة تاثير التركيز للكومارين 102 والرودامين ب في الحالة السائلة والصلبة . النتائج بينت ان شدة الامتصاص تزداد مع زيادة تركيز الصبغة وهذا يتوافق مع قانون بير - لامبرت. وان افضل تركيز كان (5 - 10x5) مولاري لكلا الكومارين والرودامين ب. ايضا شدة الامتصاص ازدادت مع زيادة نسبة تطعيم الصبغة للبوايمر في حالة الاغشية وان افضل تركيز في هذة الحالة كان (4 - 10x1) مولاري بنسبة تطعيم ( 20 مل) للكومارين 102 حيث اظهر امتصاصية جيدة (0.252) وناتج كمي (0.72) ولاغشية الرودامين ب كان افضل تركيز (5 - 10x5) مولاري بنسبة تطعيم للصبغة (15 مل) حيث ظهرت شدة الامتصاصية (0.11) والناتج الكمي (0.96) . اما الجزء الثاني فتضمن دراسة انتقال الطاقة لخليط الكومارين 102 والرودامين ب في الحالة السائلة والصلبة. باخذ الكومارين 102 كمانح والرودامين ب كقابل وتثبيت تركيز المانح عند (4 - 10x1 مولاري و4 - 10x5 مولاري) وتغير تركيز القابل من (4 - 10x1 الى 2 - 10x1 مولاري) في كلتا الحالتين.لوحظ هناك ازاحة نحو الاطوال الموجية الطويلة (ازاحة حمراء) في طيف انبعاث الرودامين ب تزداد مع زيادة تركيزه. والتي تعطي لنا امكانية تنغيم عالية في هذا المدى من الطول الموجي. في حالة السوائل افضل تركيز لانتقال الطاقة كان للمانح (4 - 10x1) مولاري وافضل تركيز للقابل كان (4 - 10x5) مولاري. في هذة التراكيز تم تحسين طيف فلورة الرودامين ب. ان عملية الامتصاص الذاتي حدثت عندما يكون تركيز القابل (4 - 10x1) مولاري وبهذة العملية تم تحسين طيف فلورة الكومارين 102 الى اعلى قيمة. في حالة الاغشية افضل نسبة تطعيم لانتقال الطاقة كانت للكومارين 102 (4 - 10x1) مولاري وللرودامين ب (2 - 10x1) مولاري وعندما يكون تركيز الكومارين 102 (4 - 10x5) مولاري وللرودامين ب (2 - 10x1) مولاري. الجزء الثالث يبين FTIR وحيود الاشعة السينية XRD والتصوير الفوتغرافي الذي يخص التركيب. نتائج FTIR تظهر زيادة وازاحة في شدة قمم الاواصر عند زيادة تركيز الصبغة ونسبة تطعيمها مع البوليمر. ومن نتائج مXRD نلاحظ سلوك الكومارين 102 والرودامين ب سلوكا بلوريا. اما PMMA فسلوكه عشوائي. ومن نتائج التصوير الفوتغرافي نجد بان صبغة الرودامين ب تعمل كمرشح عند خلطها مع ال PMMA بوليمر | This study included three parts : the first part included concentration effect study of coumarin 102 (C102) and Rhodamine B (RhB) in solution and solid state, the obtained result show the absorbance intensity increase as increase the concentration and this agreements with Beer - Lambert law, the best concentration was (5x10 - 5M) for both C102 and RhB. Also, the absorbance intensity increased with increasing the doping ratio of dye in film state, the best concentration in this state was (1x10 - 4M) for C102 with doping ratio (20ml). Which have a good absorbance was (0.252) and quantum yield was (0.72). And for RhB films was (5x10 - 5M) with doping ratio (15ml) which has absorbance (0.11) and quantum yield (0.96). The second part contented the energy transfer study of C102 and RhB mixture in solution and solid state by takeing C102 as donor and RhB as an acceptor and fixed the donor concentration at (1x10 - 4M and 5x10 - 4M) with variation the acceptor concentration from (1x10 - 4M to 1x10 - 2M) in two cases, observed that the red shift in RhB emission increase with increase the acceptor concentration, which give us a long range of tunable in emission spectrum of RhB dye. The best donor concentration was (1x10 - 4M), and the best concentration of acceptor was (5x10 - 4M) in solution state this concentration led to improve the RhB fluorescence spectrum. The self absorption process occurred when the acceptor concentration (1x10 - 4 M) and this process led to improve the C102 fluorescence spectrum to maximum value . For the solid state the best doping ratio of energy transfer was (1x10 - 4M C102 + 1x10 - 2 M) and (5x10 - 4C102 + 1x10 - 2M). The third part explained the FTIR and X - ray diffraction and microscope structure study. The FTIR result show increase and shift the band peak intensity at increase the concentration and doping ratio. From XRD show the crystalline structure of C102 and RhB and amorphous structure of PMMA polymer. The morphology study show the RhB dyes behave as filter at doped it with PMMA polymer

دراسة تطور الجسيمات داخل الغلاف الجوي باستخدام نظام المحاكاة AIRES Studying of Air Shower Development by AIRES Simulation System

اسم المؤلف: احمد جمعة حبيب سالم الطائي
اسم المشرف: احمد عزيز الربيعي بتول درعم بلاوة
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تمثل دراسة الاشعة الكونية ذات الطاقات العالية احد اكثر المواضيع تحديا في مجال الفيزياء الفلكية. اذ ان تفاعل الجسيمات الاولية مع نوى ذرات الهواء داخل الغلاف الجوي الارضي تنتج كم هائل من الجسيمات الجوية. في هذا العمل تم اجراء المحاكاة لوابل من الجسيمات الجوية المشحونة (EAS) من خلال التحقق من معاملات التطور الطولي ( عدد الجسيمات المشحونة N واكبرعمق في الغلاف الجوي الارضي Xmax) باستخدام نظام محاكاة لجسيمات الهواء الذي يدعى يرنامج AIRES عند مدى الطاقة (1014 - 1019) الكترون فولت للجسيمات الاولية مثل (الالكترونات, البوزيترونات, البروتونات, جسيمات كاما, نوى ذرات الحديد) وزوايا السقوط (0o, 10o, 30o). ان محاكاة دالة التوزيع الجانبية (LDF) لوابل من الجسيمات الجوية تم اجراؤها باستخدام برنامج AIRES لطاقات اولية مختلفة, جسيمات اولية مختلفة وزوايا سقوط مختلفة. هذه المحاكاة يمكن ان تستعمل لاعادة بناء نوع وطاقة الجسيم المتولد من وابل من الجسيمات الجوية المشحونة والتي سجلت في منظومات عملية متعددة. لقد تم استخدام نموذج هتلر (Hitler's model) في حساب عدد الجسيمات المشحونة واعلى عمق جوي للتطور الطولي في الغلاف الجوي الارضي لعدد من الجسيمات الاولية المشحونة مثل (الميونات, البايونات, الالكترونات, البرتونات, الفوتونات ونوى ذرات الحديد) عند مدى الطاقة المذكوراعلاه الكترون فولت وزوايا السقوط المذكورة اعلاه . ان حساب دالة التوزيع الجانبية تمت باستخدام صيغةNishimura - Kamata Gresien (NGK)) ) ضمن مدى الطاقة المذكوراعلاه وزوايا سقوط مختلفة (0o, 10o, 30o, 40o, 50o, 60o). ولقد تم برمجة هذه الصيغ بلغة فورتران 90 وباستخدام Compaq Visual Fortran (CVF 6.6) ]لاحظ الملحق [A. وتمت المقارنة بين محاكاة التطور الطولي (N and Xmax) باستخدام نموذج SIBYLL الهادروني مع نموذجين هادرونيين مثل.(QGSJET99 and SIBYLL16) وقد اظهرت هذه المقارنة فرصة جيدة لتحديد سلسلة تفاعلات الاشعة الكونية مع نوى ذرات الهواء في الغلاف الجوي الارضي. ان المقارنة بين نتائج الحسابات النظرية ووالنتائج التجريبية لعدد الجسيمات المشحونة واكبر عمق في الغلاف الجوي للجسيمات الاولية مثل (البروتونات ونوى ذرات الحديد) قد اعطت نتائج جيدة ضمن مدى الطاقات العالية المذكور اعلاه. | The study of high energy cosmic rays represents one of the most challenging in the astroparticle physics fields. The interaction of primary particles with atmospheric nuclei produces huge Extensive Air Showers (EAS). In this work the simulation of EAS is performed by investigating the longitudinal development parameters (number of charged particles N and depth of shower maximum Xmax) using a system of air shower simulation which is called AIRES code at the energy range (1014 - 1019eV) for different primary particles like (electrons, positrons, protons, gamma particles and iron nuclei) and different zenith angles (0o, 10o and 30o). The simulation of the lateral distribution function in EAS is performed using AIRES code for different primary energies, different primary particles and different zenith angles. This simulation can be used to reconstruct the type and energy of the primary particles that generated EAS for charged particles that registered with different EAS arrays. Using Hitler's model the estimation of the number of charged particles and depth of shower maximum of longitudinal development in EAS is performed for different primary particles such us (muons, pions, electrons, protons, photons and iron nuclei) at the same energy range and for the zenith angles mentioned above. The calculation of the lateral distribution function of charged particles is fulfilled using Nishimura Kamata Greisen (NKG) formula in the same energy range above and different zenith angles (0o,10o,30o,400,50o and 60o). These formulas have been programmed by Fortran 90 with the aid of Compaq Visual Fortran (CVF 6.6)(see Appendix A). The comparison between the simulated longitudinal development of the number of charged particles and depth of shower maximum using SIBYLL hadronic model with two hadronic models like (QGSJET99 and SIBYLL16) has shown an opportunity for determination of cosmic ray cascade interactions in EAS. The comparison between the theoretical and experimental data of the number of charged particles and depth of shower maximum for primary particles like (protons and iron nuclei) in EAS gave a good agreement within the energy range mentioned above.

دراسة تاثير زاوية الترسيب على الخصائص البصرية والكهربائية لاغشية (SnxTe1 - x) الرقيقة Study the Effect of Deposition Angle on the Optical and Electrical Properties of (SnxTe1 - x) Thin Films

اسم المؤلف: احمد ابراهيم جواد الحسيني
اسم المشرف: رعد سعيد عبد الراوي
الموضوع العام: علوم الفيزياء
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا البحث دراسة الخصائص التركيبية والبصرية والكهربائية لاغشية ((Sn0.3Te0.7,Sn0.5Te0.5,Sn0.7Te0.3المحضرة بطريقة الترسيب الحراري الفراغي على قواعد زجاجية عند درجة حرارة الغرفة وبزوايا ترسيب مختلفة θ=(0 ̊, 40 ̊, 70 ̊ ) وبسمك (100 ±10 nm) للخصائص التركيبية وبسمك10 nm) (50 ± للخصائص البصرية وايضا بسمك10 nm) (350 ± للخصائص الكهربائية ولدراسة تاثير تغير السمك(250,300,350)nm على الخصائص الكهربائية لاغشية (Sn0.5Te0.5).استخدمت تقنية حيود الاشعة السينية لدراسة الخصائص التركيبية لاغشية ((Sn0.3Te0.7,Sn0.5Te0.5,Sn0.7Te0.3. المرسبة بزوايا ترسيب مختلفة وقد اظهر نموذج الحيود ان جميع الاغشية متعددة التبلور. الحجم الحبيبي يقل بزيادة زاوية الترسيب بينما تزيد كل من كثافة الانخلاعات والمطاوعة المايكروية بزيادة زاوية الترسيب.درست الخصائص البصرية للمدى الطيفي )nm 300 - 900) , ان زيادة نسبة Te يؤدي الى تقليل النفاذية والانعكاسية وزيادة قيمة الامتصاصية.ان زيادة زاوية الترسيب له تاثير واضح في تقليل النفاذية وزيادة الامتصاصية مع ازاحة نحو الاطوال الموجية الطويلة. اما بالنسبة لفجوة الطاقة المباشرة المسموحة فتقل مع زيادة زاوية الترسيب وتزداد مع زيادة نسبة Te .ان قيم معامل الامتصاص ومعامل الخمود تزداد بزيادة زاوية الترسيب في حين تقل قيم كل من الانعكاسية ومعامل الانكسار وثوابت العزل الحقيقية والخيالية مع زيادة زاوية الترسيب.اما الخصائص الكهربائية فان التوصيلية الكهربائية تزداد مع زيادة درجة الحرارة ومعامل سيبك يزداد مع زيادة فرق درجات الحرارة لكل زاوية الترسيب .وان زيادة زاوية الترسيب ونسبة Te له تاثير واضح في تقليل التوصيلية الكهربائية والتيار وزيادة معامل سيبك .وايضزايادة سمك الغشاء له تاثير بزيادة التوصيلية الكهربائية والتيار وتقليل معامل سيبك . | In this research, studies the structural ,optical and electrical properties of (Sn0.3Te0.7 , Sn0.5Te0.5 and Sn0.7Te0.3) thin films prepared by thermal vacuum deposition method on glass substrates at room temperature and different angles of deposition θ = (0 ̊,40 ̊,70 ̊ ) with thickness (100nm ±10nm) for the structural properties and (50nm ±10nm) for the optical properties also a study of the electrical properties of (Sn0.5Te0.5) thin films deposited with different angles of deposition θ =(0 ̊,40 ̊,70 ̊ ) with thickness (250,300,350)nm. The X - ray diffraction technique (XRD) has been used to study the structural properties of (Sn0.3Te0.7, Sn0.5Te0.5 and Sn0.7Te0.3) films deposited at oblique angles and it has appeared that the films are polycrystalline. The grain size decreases with increasing deposition angle, while the micro strain and dislocation density are increased with increasing deposition angle. The optical properties are taken for spectral range (300 - 900) nm. The transmittance decreases with increasing the Te percentage, while the reflectance increases with decreasing Te percentage. The absorptance increases with the increasing of Te percentage. The increasing in deposition angle has an obvious influence in the decreasing of transmittance and increasing of absorptance with shifting toward long wavelengths. The energy gap value decreases with the increasing deposition angle, the allowed direct transition increase with increasing the Te percentage. The absorption coefficient, extinction coefficient and imaginary dielectric constant values are increased with increasing deposition angle, while the refractive index, real dielectric constant values are decreased with increasing deposition angle. The electrical conductivity increases with increasing temperature. Seebeck Coefficient increase with increasing the temperatures difference for all deposition angles. The increasing of deposition angle and Te percentage have an obvious influence in the decreasing of D.C conductivity and current and increasing of Seebeck Coefficient. Also the increasing of thicknesses for all deposition angles have an obvious influence in the increasing of D.C conductivity and current and decreasing of Seebeck Coefficient .The current is increasing in light when it complains with dark

تطوح فقدان الطاقة الجزئي للزركونيا والالومينيا للبروتون وحزم جسيمات الفا Partial of Energy loss straggling of ZrO2 and Al2O3 for proton and ? - particle beams

اسم المؤلف: ابراهيم عباس ابراهيم الخزرجي
اسم المشرف: رياض خليل احمد العاني
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا العمل اجراء الحساب النظري لمقدار فقدان الطاقة (التطوح) للزركونيا〖(ZrO〗_2) والالومينيا (〖(Al〗_2 O_(3)) لحزم البروتون وجسيمات الفا الساقطة على هذه الاهداف وبطاقات . (T= 0.05, 0.25, 1, 2, 2.5 Mev/u) ان الصيغة لدالة العزل مثل قطب البلازمون التقريبي (PPA) وتعديلاتها من خلال نموذج درود( (Drude - model ، تم اعتمادها لحساب الاحتمالية للبروتونات وحزم جسيمات الفا المسببة للتهيجات الالكترونية في الاهداف المستعملة فقد حسبت مع الاخذ بنظر الاعتبار تاثير طول الحجب (Screening Length) والتي اظهرت توافقا جيدا مع نتائج حسابية تم التوصل اليها في دراسات سابقة، علاوة على حساب قدرة الايقاف الجزئي للشحنة الفعالة ζ(q) (PSPEC) للبروتونات وجسيمات الفا المتحركة خلال اكاسيد مختلفة وبشكل رئيسي بالهدفين المستخدمين في هذا العمل. وكذلك معدل الطاقة < E > ومربع معدل الطاقة للبروتون <〖 E〗^2> تم حسابها ايضا في عملنا الحالي .كما تم كتابة برنامج(Ibrahm - Al2O3.for) بلغة (الفورتران - 90) لاجراء الحسابات العددية موجود نسخة مرفقة منه. | The energy - loss straggling of zirconia (ZrO2) and alumina (Al2O3) has been determined theoretically for proton and alpha - particle beams with incident specific energies (T= 0.05, 0.25, 1, 2, 2.5) (Mev/u). The dielectric formalism like Plasmon Pole Approximation (PPA) and its modified form presentation by Drude - model has been used to calculate the probability for an energetic proton and alpha to produce electronic excitations in target of zirconia (ZrO2) and alumina (Al2O3), taking in consideration screening length effects and good agreement is achieved with previous work. The partial stopping power effective charge (PSPEC) , ζ(q) and partial energy straggling effective charge (PSGEC)η(q) for proton and alpha particle moving through several oxides, namely Al2O3, and ZrO2 have been calculated . Good agreement has been achieved with previous work. Also average energy, <E> and average of square energy <E^2> for proton and alpha particles in Al2O3 and ZrO2 have been calculated in present work.. A program (Ibrahm - Al2O3.for) has been written FORTRANT - 90 for numerical calculation, and a copy of program is available in the present work.

دراسة متانة الربط الانتشاري بين السيراميك والمعادن في الحالة الصلبة Investigation of the Relaibility of Diffusion Bond Strength Between Ceramic - Metals in Solid State

اسم المؤلف: اروى غازي ناجي الطائي
اسم المشرف: زاريه ازات سركيس ثامر عبد الجبار جمعة
الموضوع العام: علوم الفيزياء
السنة: 2010
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

دراسة تعجيل الالكترونات باستخدام تفاعل الليزر مع البلازما الممغنطة للاتصادمية Study of Laser Acceleration of Electrons in a Magnetized Collisionless Plasma

اسم المؤلف: امال محمد كنيوي العكايشي
اسم المشرف: خالد عباس يحيى محمد عبد الزهراء حبيب
الموضوع العام: علوم الفيزياء
السنة: 2010
الموضوع الدقيق: فيزياء الالكترونيات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: A theoretical and computational investigation was carried out in the field of laser - plasma interaction using the Finite Difference Method to study the acceleration of electrons with non - relativistic velocities in a non - magnetized and magnetized collisionless plasmas.First, a (Nd : YAG) laser pulse of 25 fs duration and 5x1015 W/cm2 intensity was assumed in the present study.When this laser pulse was allowed to interact with a stationary electron in vacuum, it was found that the electron is accelerated during the interaction only and returns to stationary state after the laser pulse has passed, in agreement with previous works.Also, the interaction of the same laser pulse with a collisionless plasma at electron density ne= 1x1018 cm - 3 was studied. It was noticed that the energy of the electron during the interaction has reached a maximum value of ~ 1 keV at laser pulse intensity of 5x1015 W/cm2, while the energy of the electron after the interaction reached ~ 15 eV for the same laser pulse intensity.Finally, the interaction of the same laser pulse with a plasma was studied at electron density ne=1x1018 cm - 3 in the presence of an external magnetic field for the three values of the field strength B= 60 MG, 70 MG and 80 MG. It was found that there is an increase in the acceleration of the electron to reach a maximum energy of ~ 19 keV at a laser pulse intensity of 5x1015 W/cm2 and an applied external magnetic field strength of 80 MG during the interaction. However, the electron energy after the interaction reached ~ 3 keV at a laser pulse intensity of 5x1015 W/cm2 and an applied external magnetic field strength of 70 MG. This is due to a sustainable generated laser wakefield of ~ 2x109 V/cm. Thus, it is concluded that an applied external magnetic field assists the acceleration of the electron and can subsidize for a high laser beam intensity

محاكاة العين البشرية باستخدام الخوارزمية الجينية SIMULATION OF HUMAN EYE USING GENETIC ALGORITHEM

اسم المؤلف: لؤي عبد الصاحب رسول الطائي
اسم المشرف: سهى موسى خورشيد الاوسي محمد صاحب الطائي
الموضوع العام: علوم الفيزياء
السنة: 2010
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The aim of this research is simulate an optical system for the human eye using Genetic algorithm. The considered optical characteristics of the optical system simulator include spot size (Z), spot diagram, and effective focal length (EFL). These characteristics are determined with the aid of some mathematical relations, which give the efficiency and accuracy of the adopted optical system design. The work has been performed in two stages : In the first stage, Genetic Algorithem optimization (GA) is used to get the best design by optimizing the optical featurs of the eye elements. The optimal eye design was tested using Zemax software, the test includes estimation of the image quality, and optimal performance for the proposed optical eye system.The second stage was implementing a specially developed software to simulate the behavior of the human eye. The simulator using visual basic 6 and works under Windows operating system, it is able to plot the eye design graphically, and can estimate the considered optical functions to determine the efficiency of the eye simulator.The simulator showed agood results for spot size, spot diagram and EFL, the present work has been gained some credibility when the considered optical functions achieved by the simulator are found compatible with those achieved by Zemax, since the comparison showed a behavioral matching between them, which ensure the correct path of the GA based eye design and the successful proposed eye design.

دراسة الفجوات المصنعة بهيئة عيوب بواسطة الاشعة السينية لمصبوبة المنيوم ومفاصل لحام الفولاذ X - ray Radiographic Study of Simulated Voids - Like Defects in Aluminum Casting and Welded Joints in Steel

اسم المؤلف: فرقد رشيد سعيد الزبيدي
اسم المشرف: مازن فضيل محروك ثامر عبد الجبار جمعة
الموضوع العام: علوم الفيزياء
السنة: 2010
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: This project investigates the detection and evaluation of imperfections in internal structures of castings and welded joints by x - ray radiography. Optimum radiography conditions that lead to clear and high contrast image on the radiograph were studied.Equations derived earlier for finding the size and depth of defects in castings were used in this project to test their applicability to a wide range of geometrical parameters used in radiography.The importance of non - destructive testing NDT in industry is discussed. X - ray radiography being one of the NDT techniques, has some privilege over other techniques. For example, welded joints sometimes contain internal flaw or blowholes that may escape detection by other NDT techniques but can not escape detection by x - rays. Two kinds of samples are prepared for radiography. The first sample is aluminum casting through which two different sizes of steel spheres are included. This sample was radiographed from two opposite sides and the x - ray films were analyzed.The second sample is steel plates which are welded by arc welding and then radiographed by x - rays.Imperfections in this sample such as incomplete root penetration, undercut and porosity were detected by x - ray radiography. Different conditions influencing the preparation and radiography of the above samples were studied. The prepared welded sample was radiographed three times for different high voltages (120,140,160) kV respectively with an exposure time of (80) second. The best quality image where the defects can be detected clearly if its size is (5%) of the radiographed object using (120) kV and (140) kV. Moreover the results show that the optimum film gradient was found at (140)kV and the contrast is better than obtained with (120)kV while darkening image was found at (160)kV.In field of the aluminum casting, the two equations were derived earlier proved their capabilities as a right method for identification each of size and depth of such defects in castings and welded joints

دراسة قدرة الايقاف والمدى للبروتونات Study of Stopping Power and Range for Protons

اسم المؤلف: مصطفى عبد المحسن عبد العالي
اسم المشرف: محمد احمد صالح
الموضوع العام: علوم الفيزياء
السنة: 2009
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The calculation of the value of stopping power and the range for the proton is done by two ways : first, using Bethe - Bloch formula and second, using Bragg - Kleeman rule. The differences between the experimental and theoretical values of stopping power and range required studying the corrections for Bethe - Bloch formula which are represented by the maximum energy and density correction and then comparing the results with experimental values. Using these two formulas it has been found that the results computed by the Bethe - Bloch formula without corrections (maximum energy and density correction) are in agreement with experimental results for βγ ≤ 2 ( E ≤ 2×103MeV ) and for βγ ≤ 102 ( E ≤ 105MeV ) with corrections. The maximum energy and density corrections contributed to decrease the difference with the experimental results for βγ ≥ 102 ( E ≥ 105MeV ).The values of stopping power computed using the Bragg - Kleeman rule are in agreement with experimental results for E ≤ 200MeV and the range values computed using the Bragg - Kleeman rule are in agreement with the results computed using the Bethe - Bloch formula for E ≤ 400MeV .The results show that the energy losses for protons at the high energy values are low and vise versa; the energy losses for protons at the low energy values are high.The present calculations confirm that the proton looses its largest energy at the end of its path in matter

تاثير المعاملة الحرارية على بعض الخواص الميكانيكية للمتراكب المنيوم - كاربيد البورون Effect of heat treatment on some mechanical properties of Aluminum - Boron carbide composites

اسم المؤلف: لمى جمال عباس الرماحي
اسم المشرف: قاصد عبد الستار صالح الجنابي سعد رحمة الله
الموضوع العام: علوم الفيزياء
السنة: 2012
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Aluminum matrix composites reinforced with boron carbide are currently employed in the nuclear industry. It's used as a control rod in nuclear reactors; Since B4C has very high absorption cross section for thermal neutrons. The objective of this work is to study the effect of heat treatment on the mechanical properties of the Al - B4C metal matrix composites prepared by powder metallurgy techniques. Compressibility was measured with the Al powder. The chosen compaction pressure was 2500psi. Samples were prepared by adding 5%, 10%wt B4C to Al as well as the Al powder. Sinterability was evaluated at different temperatures (400,450,500,550,600,650°C) during 2, 4, 6, 8; 10 hr for soaking time.Mechanical test were evaluated, showed little improvement in hardness, compressive strength and young's modulus in temperatures 400,450,500,550°C, and significant improvement in hardness and compressive strength in temperatures 600and 650°C, and also improvement to the elastic modulus. Specific samples were irradiated by neutron source, and mechanical tests showed little decrease in their mechanical properties (hardness and compressive strength) due to low neutron fluence available that gives insignificant effec

قياس تركيز باعثات الفا في الادرار البشري باستخدام كاشف الاثر النووي في الحالة الصلبة PM - 355 Determination of alpha emitters concentration in human

اسم المؤلف: شيماء ذياب عطية العبودي
اسم المشرف: مازن مانؤيل الياس ندى فاضل توفيق
الموضوع العام: علوم الفيزياء
السنة: 2006
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: This work owes its importance to the fact that it aims at knowing and measuring the concentrations of alpha - particles emitters discrete by the human body in the urine in particular. Knowledge of these concentrations is extremely important since it reveals whether a person has received such doses of radioactive materials emitting alpha - particles that result in the occurrence of malignant tumor and mutations. This subject being so essential to the health of individuals and being a great help to physicians to make the proper diagnosis in the relevant cases, has imposed itself on us as the topic of this thesis. Human urine samples were taken from Iraqi workers in different fields (phosphate plants, fertilizer plants, teaching staff in nuclear physics laboratory, painters, patient and reference healthy people of different ages), using PM - 355 solid state nuclear track detectors. The exposure method was used by immersing PM - 355 detectors in urine samples for three weeks, then etching by 6.25N NaOH for 5 hrs. The track density was measured via an optical microscope. The alpha emitters concentrations in the urine samples were calculated in comparison with standard samples that were prepared in the nuclear laboratory of physics department - College of Science AL - Nahrain University.The obtained results show that the concentrations of alpha emitters in the urine samples of patients range from 1.81ppm to 2.87ppm , from 0.087ppm to 1.32ppm in reference healthy people, in painters from 0.77ppm to 1.46ppm,workers in phosphate plants from 0.94 ppm to 1.89 ppm, workers in fertilizer plants from 1.0ppm to1.42 ppm , and from 1.0 ppm to 1.29 ppm in teaching staff in nuclear physics laboratory .Deductions from the results of this work regarding the dependence of concentrations on the person&#39;s occupation, years of service, sex, age and health condition have been dealt with in sufficient details as required.

اثر التلدين على الخواص البصرية لاغشية اوكسيد الالمنيوم (Al2O3) الرقيقة المحضرة بطريقة الترسيب الكيميائي الحراري The effect of annealing on the optical properties of (Al2O3) thin films prepared by chemical spray pyrolysis

اسم المؤلف: عبير كمال جعفر
اسم المشرف: خضير عباس مشجل ابتسام محي عبد العزيز
الموضوع العام: علوم الفيزياء
السنة: 2009
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The recent study deal with the structural and optical properties of Al2O3 thin films prepared by the chemical spray pyrolysis technique at glass substrate(450°C) and studying the effect of annealing at different temperatures (500,550,600) °C on the optical properties.The results of X - ray diffraction showed that the prepared films are polycrystalline, the study of optical properties included the record of transmittance spectrum of the films with the wavelengths range from (300 - 900)nm, and then measuring the forbidden energy gap of electronic transitions where it was found that the values of the forbidden energy gap of both allowed and forbidden transitions are (3.4)eV and (2.5)eV successively and it was (1.6)eV for the allowed indirect transition. When annealing the Al2O3 thin films, the values of the forbidden energy gap of the allowed and forbidden of direct transitions are (2.7)eV and (3.6)eV and it is (1.9)eV for the allowed indirect transition. Also, absorption coefficient , reflectance and optical constants such as extinction coefficient, refractive index, dielectric constants with it's two parts real and imaginary and optical conductivity as a function of photon energy have been studied, the study showed that the annealing caused an increase in energy gap values, reflectance, transmittance, refractive index and real part of dielectric constant, and a decrease in the values of absorptance, absorption coefficient, extinction coefficient, imaginary part of dielectric constant and the optical conductivity.

نموذج بطارية باستخدام برامجيات PSPICE مع مغير شحن ثنائي الاتجاه Pspice Battery Model with Bidirectional Charging Converter

اسم المؤلف: زينة موفق قدوري حسين العزاوي
اسم المشرف: زينب منذر يونس كبة
الموضوع العام: علوم الفيزياء
السنة: 2008
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: This research intents to design Bidirectional Converter that can be used in wide applications from uninterrupted power supplies (UPS), photovoltaic (PV) and battery charging and discharging system, to auxiliary power supplies designed primarily with a general module depending on Orcad PSPICE program.Lead Acid battery model (12V) is putted, which is used in wide applications. The model consists of charge efficiency and battery voltage components. The charge efficiency factor can vary from (0 to 1) and is dependent on the Battery State of charge and charge current. The voltage component of the model consists of amp - hour integrator which tracks the net current flowing into the battery terminal (Battery voltage). The output of the integrator gives us the state of charge so, it is connected to a table driven voltage source, ETABLE, which generates the equivalent open circuit battery voltage. The method used here is implemented in orcad PSPICE program with bidirectional converter of properties (D=0.4, P=12W, Vo=12V, f=1 KHz, Io=1A).

دراسة لجودة الصورة للعين البشرية A Study of the Image Quality for Human Eye

اسم المؤلف: ازهار عويد كاظم
اسم المشرف: صلاح عبد الحميد صالح
الموضوع العام: علوم الفيزياء
السنة: 2008
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The study of the effect of some factors on the human is difficult and complex because of the lack of instruments for measuring eye efficiency.The human eye is an optical organ, its work is similar to the camera work, but the eye can not return the image which it makes, but the camer a can return. Producing high quality image by human optical system like other lens system is affected by many parameters, some of them are internal such as aberrations and age, pigmentation. Also human eyes suffer from some defects that effect the human eye image quality, some of these defects are : 1. Hypermetropia (Long sightedness)2. Myopia (short sightedness) 3. Some other defects The optical characteristics of human eye imaging system are studied quantitatively via experimental and computer modeling. Experimental work is carried out to study the effect of spatial frequencies, color and ages on image eye quality. Computer simulations models are carried out to study the limitations imposed by imaging in the human eye. Theselimitations include the diameter of pupil eye, the aberrations (astigmatism and spherical), age, and pigmentation of eye. These limitations are computed in terms of modulation transfer function (MTF).The results showed that MTF curves are suitable for determining image quality and the limitions effect on imaging system. Also result showed a coincidence between laboratory work and theortical calculation of MTF for age, pigmentation, pupil size and aberrations

ميكانيكية الانتقال الالكترونية لثنائي شوتكي Al/c - Si/M Electronic Transport mechanism of Al/c - Si/M Schottky Diodes

اسم المؤلف: رسل عبد السادة عزوزعبود
اسم المشرف: حسين خزعل رشيد طالب سلوم حمادي
الموضوع العام: علوم الفيزياء
السنة: 2008
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هدا البحث تحضير معدن - شبه موصل باستخدام تقنية التبخير الحراري بالفراغ,حيث استخدمنا اغشيه رقيقه من الانديوم والفضه والذهب والالمنيوم .حيث تم معامله الثنائيات Al/c - Si/Inو Al/c - Si/Ag وAl/c - Si/Au حراريا بدرجات تلدين مختلفة( 303, 373، 473) كلفن. التوصيل الاومي لهذه الثنائيات كان من معدن الالمنيوم بسمك 0.2مايكرومتر اما معادن اتصال شوتكي فقد كانت بسمك(0.1, 0.2) مايكرومتر وضغط تبخير بحدود 10 - 5 ملي بار. تم في هذا البحث ايضا دراسة تاثير حرارة التلدين وتغيير دوال شغل المعادن على الخصائص التقويمية للثنائيات عن طريق دراسة خصائص تيار - جهد ومتسعة - جهد لتلك الثنائيات, وقد لوحظ بان هناك تحسن بالخصائص التقويمية للثنائيات (انخفاض في عامل المثالية وفي كثافة تيار الاشباع العكسي). واظهرت الدراسـة ان كثافة تيار الاشباع Js)) وحاجز الجهد (ΦB) وعامل المثالية (n) تم حسابها باستخدام خصائص تيار - جهد ذات المقياس اللوغارتمي لاحـداثـي التيار. بينت خواص تيار - فولتية للثنائيات Al/c - Si/Inو Al/c - Si/Ag وAl/c - Si/Au بان تيار الظلام الامامي يتغير اسيا تقريبا مع فولتية الانحياز وهذا يتفق مع نموذج اعادة الاتحاد - الانتفاق ولوحظ نقصان تيار الظلام بزيادة السمك. ومن خلال قياسات تيار - فولتية تحت ظروف الاضاءة وجدنا ان التيار الضوئي يزداد مع زيادة درجة حرارة التلدين ويقل مع زيادة السمك . درست خصائص السعة - الجهد للتراكيب الثنائية Al/c - Si/Inو Al/c - Si/Ag ما عدا Al/c - Si/Au بسمك 0.2 مايكرو متر وبدرجات تلدين مختلفة. حيث قيست سعة الانحياز العكسي كدالة لفولتية الانحياز وبتردد 1 ميكاهيرتز وقد دلت هذه النتائج على ان السعة تقل بزيادة جهد الانحياز العكسي، وبزيادة السمك ودرجات حرارة التلدين. قيم جهد البناء الداخلي(Vbi) ، حاجز الجهد (ΦBp) وتركيز الحاملات (Na) تم حسابها باستخـدام علاقـة شوتـكي - موت] C - 2 vs. V [. اظهرت قياسات التوصيليـة المستمرة وباستخـدام علاقة ارهينوس] lnσ = f(103/T) [ وجود طاقاتي تنشيط Ea1وEa2 والقيم المحسوبه تشير الى ان طاقات التنشيط تزداد بزيادة درجه حراره التلدين .اظهرت قياسات التوصيليـة المستمرة وباستخـدام علاقة ارهينوس] lnσ = f(103/T) [ وجود طاقاتي تنشيط Ea1وEa2 والقيم المحسوبه تشير الى ان طاقات التنشيط تزداد بزيادة درجه حراره التلدين . | Metal - semiconductor (M - S) junctions are prepared in this study by thermal evaporation technique, in which we used indium (In), silver (Ag) and gold (Au) films and aluminum (Al) films. The Al/c - Si/In, Al/c - Si/Ag and Al/c - Si/Au diodes heat treated at different annealing temperatures 303,373 and 473 K. The ohmic contact was aluminum with thickness of about 0.2 µm and the Schottky contacts were indium, silver and gold with thickness of (0.1, 0.2) µm under vacuum conditions of about 10 - 5 mbar. The effects of annealing temperatures and work functions have been studied by current - voltage and capacitance - voltage characteristics. The I - V characteristics showed that the rectification properties of all prepared diodes were improved with increasing the annealing temperature and the metal work functions (the ideality factor and the saturation current density decreased). The ideality factor (n), saturation current density (Js) and the barrier height (ΦB) were calculated using I - V plots with semilogarithmatic scale. The current - voltage characteristic of Al/c - Si/In, Al/c - Si/Ag and Al/c - Si/Au junctions showed that the current varies approximately exponentially with applied voltage and the junction was coinciding with recombination - tunneling model, the dark current decreases with increase of the thickness. Under illumination, the photocurrent increases and decreases with increase of annealing temperatures and thickness, respectively. The C - V characteristics of Al/c - Si/In and Al/c - Si/Ag diodes have been prepared at different thickness except Al/c - Si/Au at thickness equal to 0.2µm and annealing temperatures. The reverse bias capacitance was measured as a function of bias voltage at frequency 1 MHz; the capacitance decreases with increasing the reverse bias voltage, also with increasing of thickness and annealing temperatures. The built - in voltage (Vbi), barrier height (ΦB) and the carrier concentration (Na) were calculated using Mott - Schottky plot (C - 2 vs. V). The d.c. conductivity measurements using Arrhenius plot (lnσ=f(103/T)) showed that there are two activation energies Ea1,Ea2.The electrical activation energies increase with increasing annealing temperatures.

طريقة مطورة لتحديد السرعة النصف قطرية للطائرة ‏باستخدام ازاحة دوبلر An improved method for the determination of ‎airplane radial velocity using Doppler shift

اسم المؤلف: جزيل حسين عزيز
اسم المشرف: لؤي ادور جورج ليث عبد العزيز العاني
الموضوع العام: علوم الفيزياء
السنة: 2008
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا البحث تم تقطيع الملف الصوتي للطائرة المتحركة الى عدة مقاطع متساوية باستخدام النافذة المتشابكة, ثم بعدها تم تحويل كل مقطع من المجال الزمني الى المجال الترددي باستخدام تحويل فورير السريع0للحصول على الترددات المميزة تم استخدام النافذة المتحركة والتي يتناسب حجمها مع قيمة الترددات التي تم ملاحقتها, وهذه الالية تجعل من العمل يختلف عن العمل السابق الذي تم فيه استخدام نافذة ذات عرض ثابت في ملاحقة الترددات المميزة0 اذ تم اعتماد خوارزمية في انتقاء الترددات المميزة,وتعتمد هذه الخوارزمية على الترددات التي تخضع لقانون دوبلر بحيث ان ازاحة دوبلر تتناسب طرديا" مع قيمة الترددات المميزة, كذلك ان الترددات التي تم ملاحقتها هي الترددات الاكثر ظهورا" في طيف القدرة0لقد تم استخدام عدة احجام للنافذة المتشابكة من اجل دراسة تاثير تغير حجم النافذة على دقة ايجاد السرعة النصف قطرية للطائرة ومقارنتها مع النافذة غير المتشابكة0 تمت مفاضلة دقة النتائج من خلال عاملين هما : الاول، تقارب المنحنيات المرسومة للسرعة النصف قطرية كدالة للزمن للحالتين النافذة غير المتشابكة والمتشابكة، حيث كلما كانت المنحنيات متقاربة اكثر كانت النتائج افضل. والعامل الثاني، هو قيم مربع معدل نسبة الخطا لخطية العلاقة بين ازاحة دوبلر والترددات المميزة حيث انه كلما كانت قيم مربع معدل نسبة الخطا قليلة كلما كانت النتيجة افضل وهذا يعني ان الترددات المميزة الناتجة من الحسابات ستحقق معادلة دوبلر بشكل افضل0 كذلك تم استخدام ثلاث ازمان للمقطع الصوتي وهي (0.1ثا) و(0.15ثا) و(0.2ثا) ومن خلال النتائج التي ظهرت وجد ان الزمن (0.2ثا) لطول المقطع الصوتي يعطي نتائج افضل من بقية الازمان. بالاضافة الى ذلك تم اختبار عدة قيم لعرض النافذة وهي (0.01) و(0.03) و(0.05)، وقد وجد ان افضل قيمة لعرض النافذة هي (0.05). كما وجد ان نتائج استخدام النافذة المتشابكة افضل من استخدام النافذة غير المتشابكة0 | In this research the sound file recorded for a moving airplane has been sliced into several frames using overlapped window. Then the array of each frame is transformed from the time domain into frequency domain using Fourier Transform (FT).To determine the characteristic frequency of the sound, a moving window technique was used, the size of that window is made proportional with the values of the tracked frequencies, the use of this adaptive window makes the difference with a previous research work conducted for the purpose, in that work a fixed - size window is used to track all characteristic frequencies.An algorithm was established to select the characteristic frequencies, this algorithm allocates the frequencies which satisfy the Doppler relation, beside that the tracked frequencies was chosen to be the most occurred frequencies in the power spectrum. Several sizes of the overlap windows have been tested to study the effect of window size on the accuracy of the determined radial velocity of the moving airplane. The obtained results have been compared with the corresponding results of non overlapped window.The accuracy of the results was assessed using two criterion, the first is the closeness of the curves of the determined radial velocities versus time for the case of overlapped and non - overlapped window; the closer curves indicate better results. The second used criteria is the Root Mean Square Error (RMSE), which is used to determine the linearity of the relationship between Doppler shift and characteristic frequencies, the least values of (RMSE) signify better results are obtained. Three values of the frame size have been tested; they are 0.1s, 0.15s and 0.2s. From the attained results it was found that the frame size 0.2s gives better results than the other tested sizes. In addition several values of window size have been tested; they are 0.01s, 0.03s and 0.05s, the best value is found 0.05s. Also the results indicated that the use of overlap window gives better results than the case of using non - overlap window.

حسابات الامثلية لمنظومة مغاطيسية تتالف من حارف وعدسة A Computational Optimization of Magnetic System Consists of Deflector and Lens

اسم المؤلف: احمد حسين علي
اسم المشرف: احمد كمال احمد عدي علي حسين
الموضوع العام: علوم الفيزياء
السنة: 2008
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: A computation investigation on the design of magnetic deflection and focusing system using the synthesis approach of optimization method has been done. By solving the paraxial ray equation using the Range - Kutta - Nystrom method the trajectories of the electron beam and the optical properties of the magnetic deflection and focusing system under infinite and zero magnification conditions has been computed.The synthesis approach of optimization method is used in the present work to finding the optimum design of magnetic deflection and focusing system which give rise to the minimum spherical, chromatic, spiral distortion, and radial distortion aberration.The toroidal deflection coil is used as the source of magnetic field, and then the field distribution is determined by using an exponential function. The moving objective lens concept is included in the computation of system field

تطبيقات الانموذج العنقودي المزدوج في الانوية الخفيفة APPLICATIONS OF COUPLED CLUSTER MODEL IN LIGHT NUCLEI

اسم المؤلف: علياء حسين السباهي
اسم المشرف: ليث عبد العزيز العاني سعد ناجي عبود
الموضوع العام: علوم الفيزياء
السنة: 2007
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: احد الاكتشافات التي حدثت مؤخرا في الفيزياء النووية هي وجودالانوية السحرية(Halo nuclei). الانوية السحرية هي انوية ضعيفة الترابط حيث قلب النواة مع كثافة نووية طبيعية محاطان بمنطقة من مادة نووية مخففة كما في (كالنيوترون السحري). مثل هذه النوى تتواجد بكثافات خفيفة اوثقيلة, ان هذه الانوية موضوع بحث عدد كبير من الدراسات النظرية وكذلك العملية لغرض فهمها بطريقة اكثر وضوحا. ولهذا لوحظ خلال السنوات العشر السابقة اتسعت دراسة هذه الانوية. وفي هذه الدراسة تم فحص عدد من الانوية السحرية ومعالجتها بعدة طرق وايجاد بعض الخصائص الفيزيائية لهذه الانوية. في هذه الاطروحة تم فحص تركيب النوى السحرية الخفيفة من خلال الانموذج المجهري المتغير, هذا الانموذج هو عبارة عن توسيع لعمل سابق عن القشر المغلقة. تم استخدام الانموذج العنقودي المزدوج في هذه الاطروحة بالاعتماد على جسيمة الفا كاساس في الانموذج العنقودي وكذلك النيوترونات التي تظهر من خلال هذا الانموذج. كما تم معالجة الدالة الموجية بطرق التغاير وطريقة جاسترو للوصول الى دالة موجية اختبارية مقاربة الى الدالة الموجية الحقيقية.الدالة الموجية نحصل عليها من حالة االمصدر والتي تتضمن المتناظرات المطلوبة وتقدم وصف انتقالي (ثابت) للنظام يشكل عناقيد متعددة وغير مترابطة بعد ذلك نستخدم المؤثرات المترابطة ( بنوعيها المدى المتوسط الى الطويل الخطي والمدى القصير اللاخطي ) للحصول على دالة موجية جديدة, كم ان الدالة الموجية في الانموذج العنقودي تسمح بوصف الحركة الاهتزازية بين التجمعات داخل النواة. ان اهمية هذه الطرق تكمن في ايجاد حل لمعادلة شرودنكر كما تم الاعتماد على تفاعل نوية - نوية شبه الواقعية للوصول الى الجهد المطلوب, وان هذا البحث يتطابق مع مبدا باولي للاستبعاد. كما تم استخدام طريقة مونتي كارلو في هذا البحث وذلك لانها تمتاز بدقة رقمية عالية.وتولي اهتمام عالي لمتطلبات الانموذج الدقيقة. "والافضل استعمال المترابطات بحالة عشوائية كما يجب الاخذ بنظر الاعتبار تقدير الاخطاء بصورة اكثر دقة"في هذه الاطروحة تم استخدام الانموذج لفحص الانوية التالية : (5He,6He,8Be,9Be) وايجاد بعض الخصائص الفيزيائية لها من خلال ايجاد توزيع الكثافة لجسيم واحد ولجسيمين. بعدها نحصل على صورة نوعية لتوزيع المادة في النواة التي نحصل عليها وتجهيز تحليل معين لحالة مقيدة واحدة تتطلب قوة المدار - البرم في خطة مزدوج ( S - L ) ستظهر لنا انموذج قادر على انتاج حالات مقيدة يقترح لانظمة القشر المفتوحة بشكل اصطناعي لتعديل االتعبير المركزي للتفاعلات شبه الواقعية المستخدمة. كما تم ايجاد علاقة الطاقة مع عرض القشرة, وكذلك ايجاد سلوك النواة من خلال ايجاد العلاقة بين الطاقة والمسافة الى مركز كتلة جسيمة الفا. (5He ,8Be) هي انوية سحرية , نلاحظ السلوك العام للطاقة تقترب للحد الادنى وهذه يمكن ملاحظتها من المعدل الكروي لتوزيع الكثافة لجسيم وجسيمين,اما الانوية الخفيفة (6He,9Be) هي انظمة للقشر المفتوحة . في هذه الاطروحة تم كتابة البرامج باستخدا لغة الفورتران (77). | One of the recent discoveres in nuclear Physics is the existance of Halo nuclei . Therefore, halo nuclei are very weakly - bound exotic states of nuclear matter in which the outer one or two valence nucleons (usually neutrons), and a nuclear core with normal nuclear density is surrounded by a region of dulite nuclear matter, referred to as the neutron halo. Such nuclei occur from light to heavy masses and have been the subject of a alarge number of theoretical studies to try and understand them. A number of theoretical models have been proposed over the years. In this thesis the structure of light halo nuclei is examind through a fully microscopic variational model, where the Pauli exclusion princple explicity satisfied and semi - realistic nucleon - nucleon interactions are used. The model is an extension of previous work of closed shell nuclei. The wavefunction is obtained from a starting or reference state, which includes the required symmetries nd provides a translationally invariant description of the system in terms off several uncorrelated clusters. Medium to long - rang linear and short - range non - linear corrlation operators are then applied to obtained a good wavefunction, these models are important to solve the Shrodenger equation. The model developed is then used to examine the nuclei , , and . By making use of one - and two - body density distributions a qualitative picure of the matter distribution in the nucleus is obtained. The analysis provided indicates for a bound state one requires spin - orbit force, something that we don’t include. Nevertheless working in the L - S coupling scheme have shown that our model is capable of producing bound states for open - shell sysytems by artificially altering the central term of the semi - realistic interactions in use. And to find the relashonshipe between the energy and the width of shell, and find the behavioer of nuclei from throught the relation between energy and distance to the center of mass of alpha partical, 5He and 8Be are known halo nuclei. The general behaviour obtained was that the energy approached a minimum, as the separation between the several constituents increased. This could be monitored by observing the spherically averaged one - and two - body density distributions. We could clearly see that the energy was minimized as the one - body distribution broadened with the center shifting a way from the origin. The two - body density distribution separated into two parts : a main body similar to the alpha - particle and a small tale effect. We used algorithmic scaling in order to distinguish the two parts. Despite the fact our interaction is not adequate for the light halo nuclei of 6He and 9Be we demonstrated that our model can produce bound state for such open - shell systems by modifying the inter - nucleon force.in this thesis used programes in Fortran (77).

برنامج حسابي لحساب بعض خواص التراكيب البلورية A Computational Program to Determine Some of Crystal Structure Specifications

اسم المؤلف: لينا حسين علي
الموضوع العام: علوم الفيزياء
السنة: 2008
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: البرنامج الحسابي crystal - 2 المصمم بلغة فيجول بيسك 6 صمم وطبق لتعريف خصائص ثلاثة انواع من البناء البلوري يتضمن قياس الابعاد البلورية(a, b, c) , الزوايا المحورية (α, β, γ) ,متوسط حجم الحبيبة (AGS) , نسبة الملئ (FF) والاجهاد المرن (ε) . هذا البرنامج سوف يعطينا وصف كامل عن البناء البلوري لثلاثة انواع من البناء البلوري للمواد المستخدمة بواسطة ادخال المعلومات من البيانات التي تتضمن زاوية الحيود (2θ) ومعاملات ميلر hkl للمواد المستخدمة مثل كبريتيد الكادميوم (CdS) والبريليوم (Be) ومقارنة القيم المحسوبة مع القيم النظرية للبيانات المدخلة للمواد المستخدمة.كما انه تم قياس (AGS) بواسطة استخدام نظرية شيرر وعامل المرونة بواسطة استخدام نظرية هول ويليامسون للمواد المستخدمة مثل كبريتيد الكادميوم . | Computational program &#34;Crystal - 2&#34; in Visual Basic 6.0 was designed and applied to identify the specification for three crystal structures includes the lattice parameters (a, b, c), the axial angles (α, β, γ), the Filling Factor(FF) foe CdS, the Average Grain Size (AGS) for CdS, and the Elastic Strain (ε) for CdS and CdTe. This program will give us a complete description on crystal structure for three crystal structures material by inserting a data which include the values of Miller indices (hkl), the diffracted angle (2θ) from ASTM data for cadmium sulfide, beryllium and compare the calculated values with the values of ASTM data used material. This program is includes many special calculations for a certain material such as cadmium sulfide that used to examine the cubic system and calculated lattice parameters were found to be a ≈ 5.82 Å, b ≈ 5.83 Å and c ≈ 5.81 Å and there is a drift error about D ≈ 4.365314 10 Å when is compared with the published values, and to examine orthorhombic system by using ASTM data for cadmium sulfide as example the calculated values were found to be a ≈4.169 Å, b ≈ 2.791 Å and c ≈ 5.413 Å, with a drift error about D ≈ 8.28014 10 Å, also the tetragonal system is also examined for beryllium and the calculated values were found to be a ≈ 1.36 Å, b ≈ 1.36 Å, and c ≈ 3.58 Å with a drift error D ≈ 5.743535 10 Å, and the average grain size is also calculated for CdS by using the Scherrer&#39;s formula ,the filling factor is determined for Cadmium Sulfide, and the elastic strain by using the Hall - Williamson method for CdS and CdTe

ترميم الصور باستخدام تقنيات محورة غير خطية Image Restoration Using Adaptive Nonlinear Techniques

اسم المؤلف: محمد خضير كاظم
اسم المشرف: اياد عبد العزيز العاني صلاح عبد الحميد صالح
الموضوع العام: علوم الفيزياء
السنة: 2008
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Image restoration is the process of finding an approximation to thedegradation process and find appropriate inverse process to estimate theoriginal image.An iterative restoration technique(Tikhonov method) was adapted.The adapted filter was designed for restoring RGB satellite images thatare blurred with space - invariant point spread function, Gaussianfunction, and corrupted with additive noise, and salt & pepper noise.Different degradation parameters, i.e. different signal to noise ratio wereconsidered and different noise density.The results using an adaptive filter were compared,quantitatively, with different types of conventional restoration techniques,(such as inverse filter, Least - Squares filter (Wiener Filter), andConstrained Least - Squares filter) using Mean Square Error (MSE).Results show that The Mean Square Error of the restored imagesdecreases with increasing the number of iteration until the resultconvergence. Also the ratio of the MSE of the degraded image to therestored image will increase with decreasing SNR for Gaussian noise,and with increasing noise density for salt and pepper noise respectively,then Results show this method has better performance for restoring thedegraded images, especially for low signal to noise ratio, and for highnoise density.

استخدام تحويل الجيب تمام لتشفير حزمة التحويل المويجي التقريبية Using Discrete Cosine Transform to Encode Approximation Wavelet Subband

اسم المؤلف: سارة عدنان محمود
اسم المشرف: لؤي ادور جورج
الموضوع العام: علوم الفيزياء
السنة: 2008
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Various compression methods have been proposed to achieve high compression ratios and high image qualities in low computation time relatively. In this research work a combined transform coding scheme was proposed, the adopted system utilize both Discrete Cosine Transform and Wavelet transform. The advantages of both transforms were taken into consideration to encode the image. First, the system transform the color components of the image from (RGB) to (YUV), the U and V bands are downsampled due to their poor spatial resolution, and then the wavelet transform is applied on each color band separately. Some spatial coding steps are applied on detail coefficients (like hierarchal uniform quantization, Run Length Encoding (RLE), shift coding) to gain more compression. The approximate coefficients are coded by using (DCT), uniform quantization, shift coding.Also, some analysis tests were done to study the performance of the established system, and the effects of the involved coding parameters on the system were investigated. The test results indicated that the proposed scheme give high compression ratio and good fidelity measures (MSE and PSNR). Moreover, the proposed scheme was found need 0.7 second to compress color images of size (256x256) without making significant degradation in image quality.

التحليل وتطبيق بواسطة الحاسبة للخلية الكهروضوئية في المغير المستمر A Computer Simulation and Application of PV cell on DC - DC Converter

اسم المؤلف: زيد سمير جبار السامرائي
اسم المشرف: زينب منذر يونس كبة
الموضوع العام: علوم الفيزياء
السنة: 2008
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: المنظومات الكهروضوئية تولد الكهرباء بواسطة التحويل المباشر للطاقة الشمسية وتعتبر نظام متكامل بسبب كونها مركبة من مجموعة قطع من العناصر. الدراسة النظرية للانظمة الشمسية وتقنيات انشاء موديل لها باستخدام دوائر كهربائية مكافئة كذلك خصائص الخلية الشمسية ستكون مطروقة في هذا البحث. الموديل الجديد للخلية الشمسية سيتم تحقيقه باستخدام برنامج التحليل pspice. الفولتية المثالية كانت 17volt والتيار المثالي كان 4.41A. هذا الموديل سيستخدم في المغير المستمر والذي يمتلك المواصفات التالية، فولتية خرج متغيرمن (1.5V - 12V)، التردد المفتاحي 20kHZ ، دورة الفرض (0.1 - 0.7)، وقدرة الخرج من (1W - 41.6W). المنظومة مصممة ومفحوصة بواسطة برنامج التحليل pspice. تطبيقات موديل الخلية الشمسية والبطارية ستنفذ في المغير المستمر. نتائج التحليل للمغير التي حصلنا عليها من كلا المدخلين اعطت توافق كبير في قيم النتائج. | Photovoltaic system generates electricity by the direct conversion of the sun's energy and it is a modular system because it is built out of several pieces of elements. The theoretical studies of PV and modeling techniques using equivalent electric circuits carried out and the characteristics of PV cell have been investigated. The new model of PV implemented in pspice program, the optimum voltage was (17volt) and optimum current was (4.41Ampere). This model is used in the DC - DC converter which has the following characteristics, the variable output voltage is (1.5V - 12V), switching frequency (20 kHz), duty cycle (0.1 - 0.7) and the output power (1W - 41.6W), the system has been design and tested by pspice program. The application of PV and battery implement in the DC - DC converter, the results of the converter simulation obtained from both two input show a good agreement.

محاكاة عامل التراكم لاشعة الكبح الناتجة من الامتصاص الكلي لاشعة بيتا Simulation of Buildup Factor for Bremsstrahlung Produced by Complete Absorption of Beta Rays

اسم المؤلف: ميلاد جذلان علي الانصاري
الموضوع العام: علوم الفيزياء
السنة: 2006
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم تطبيق المحاكاة بطريقة مونتي كارلو لدراسة عامل التراكم لاشعة الكبح المتولدة من الامتصاص الكلي لجسيمات بيتا، حيث لم يسبق دراسته من قبل رغم اهميتها الكبيرة في الدراسات المتعلقة بحساب الجرعة الاشعاعية. حسب عامل تراكم اشعة الكبح لاسماك مختلفة من الماء والكونكريت والالمنيوم والقصدير والرصاص لمصدر السترونتيوم/ اتريوم 90Sr/90Y لانتاج اشعة بيتا بطاقة عظمى مقدارها 2.2 مليون الكترون فولت، وقد تم ذلك من خلال تصميم وتنفيذ برنامج حاسوبي للمحاكاة اطلقنا عليه تسمية "BBF" لتمثيل حلول المسائل التقليدية (الكلاسيكية) لانعكاسات وعبور اشعة الكبح. حيث يتظمن البرنامج دوال لمتابعة حياة او مسيرة الفوتونات نظريا باعتبار نظرية الاحتمالات التي تصف السلوك الحقيقي للفوتونات. في هذا البحث تم دراسة عدد من المعاملات المتعلقة بتصميم البرنامج والمسماة بعوامل المحاكاة وكذلك دراسة المعاملات المتعلقة بمادة الدرع والمسماة بالعوامل الفيزيائية.تم حساب عامل تراكم اشعة الكبح لدرع مفرد ودلت نتائج المحاكاة على ما يلي : • يتزايد عامل التراكم لاشعة الكبح مع زيادة سمك الدرع.• عامل تراكم اشعة الكبح للدروع ذات العدد الذري الواطئ اقل منها في الدروع ذات العدد الذري العالي لنفس طاقة المصدر.• تم استنتاج علاقة شبه تجريبية لعامل تراكم اشعة الكبح كدالة لكل من العدد الذري Z والسمك X لمادة الدرع كالاتي : BBUF = 1 + (a1 Z + a2) X ( a3 Z + a4 ) حيث a4, a3, a2, a1 هي معاملات الملائمة وتعتمد على التوزيع الطاقي لاشعة الكبح. لمصدر كبح السترونتيوم / اتريوم فان قيم هذه المعاملات هي : a1 = 0.0007, a2 = 0.0022, a3 = 0.0072, a4 = 0.4204 | The Monte Carlo simulation method has been applied to generate the first data for bremsstrahlung buildup factor (BBUF) produced by the complete absorption of beta particles in different materials. The bremsstrahlung buildup factor was computed by the present method for different thicknesses of water, concrete, aluminum, tin and lead at the maximum bremsstrahlung energy of 2.2 MeV for 90Sr/90Y beta source. A computer program “BBF” was designed and improved to perform the calculations which solve the classical problem of a gamma ray reflection and transmission, the basic idea of this program is to create a series of life histories of the source particles using random sampling technique to sample the probability laws that describe the real particle’s behaviour, and to trace out the particle’s random walk’ through the medium. The effect of some considered parameters like the simulation parameters and physical parameters were studied. The bremsstrahlung buildup factor has been calculated for single layer shield. The simulation results indicate the following remarks : • The bremsstrahlung buildup factor increases with the increase of thickness of the shield. • The bremsstrahlung buildup factor for low atomic number material is lower than that for a high atomic number material at the same source energy.• The relation between the bremsstrahlung buildup factor BBUF with the atomic number Z and thickness X of the shielding material is suggested to follow the semi - empirical formula : BBUF = 1 + (a1 Z + a2) X (a3 Z + a4)where a1, a2, a3 and a4 are fitting parameters depends on the bremsstrahlung energy distribution. For 90Sr/90Y bremsstrahlung, these parameters are : a1 = 0.0007, a2 = 0.0022, a3 = 0.0072 and a4 = 0.4204

دراسة حاسوبية عن بعض خواص عدسة كابور A Computational Investigation on Some Properties of a Gabor Lens

اسم المؤلف: علي اسماعيل محمد السماوي
الموضوع العام: علوم الفيزياء
السنة: 2006
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: لقد جرت دراسة حاسوبية لبعض خواص عدسة كابور وبمساعدة الحاسوب الشخصي في حالة عدم وجود تاثير لشحنة الفراغ. لقد تركز العمل على تصميم عدستين كهروسكونية ومغناطيسية متحدة المركز. العدسة الكهروسكونية هي عدسة ثنائية الاقطاب مغمورة واقطابها لها شكل اسطواني تفصلهما مسافة .s العدسة المغناطيسية هي عبارة عن ملف يمر به تيار يتكون من عدد من اللفات ذات مجال مستطيل وطول .L ان متغيرات العدسة الكهروسكونية هي النسبة بين الاقطاب والمسافة بينهما, بينما في العدسة المغناطيسية فكانت عدد اللفات - التيار وطول العدسة. العدسة المركبة من العدسة الكهروسكونية والعدسة المغناطيسية (عدسة كابور) تم دراستها عندما تعمل تحت ظروف التكبير الصفر والمالانهائي. تم حل معادلة المسار المحورية بمساعدة توزيع المجال الكهربائي والمغناطيسي المحوري وباستعمال طريقة رنج - كوتا. استعمل المجال المحوري ومشتقتيه الاولى والثانية لحساب الخواص البصرية للعدسة. ان معاملي الزيغ الكروي واللوني تم معايرتها بالنسبة الى البعد البؤري للعدسة ولظروف التكبير الصفري واللانهائي. | A computational investigation has been carried out in some properties of Gabor lens with the aid of personal computer under the absence of space - charge effects. This work has been concentrated on designing two concentric, electrostatic and magnetic lenses. Electrostatic lens is a two - electrode immersion lens whose electrodes are cylindrical in shape separated by a separation distance. Magnetic lens is a number of turns of the current - carrying coil of a hypothetical rectangular field of length L. The variable parameters of the electrostatic lens are the voltage ratio and the separation distance while in the magnetic lens the variable are the Ampere - turn and lens length. The combined electrostatic and magnetic lens (Gabor lens) has been investigated under zero and infinite magnification conditions. The paraxial ray equation has been solved with the aid of the axial electric and magnetic potential distribution using Runge - Kutta method. The axial potential and its first and second derivatives have been used for computing the optical properties of the lens under consideration. The lens spherical and chromatic aberration coefficients have been normalized in term of the focal length under zero and infinite magnification conditions.

تراكيز اليورانيوم في الدم البشري في بعض محافظات العراق باستخدام كاشف الاثر CR - 39 DETERMINATION OF URANIUM CONCENTRATION IN HUMAN BLOOD SAMPLES IN SOME GOVERNORATES OF IRAQ BY USINGCR - 39 TRACE DETECTOR

اسم المؤلف: سجى فائز حسن عبد الرسول
اسم المشرف: ندى فاضل توفيق
الموضوع العام: علوم الفيزياء
السنة: 2006
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: هذه الدراسه تم قياس تركيز اليورانيوم وحساب الفعاليه الاشعاعيه النوعيه في الدم البشري(اللوكيميا والاصحاء) الماخوذه من مناطق مختراه لمحافظات القطر وقد استخدمت تقنيه عد اثار شظايا الانشطار النووي الناتج من انشطار نواه اليورانيوم - 235 المقصوفه بالنيوترونات الحراريه من المصدر النيوتروني Am - Be)) بفيض نيوتني 3n.cm - 1.s - 1)10 5 x) وم تحديد تراكيز اليورانيوم بالحسابات المعتمده بالمقارنه مع النماذج البيولوجيه القياسيه والتي تم تحضيرها. ان معدل اعلى تركيز لليورنيوم في الدم كان في محافظه البصره (1.654 ppm) اما اقل معدل تركيز لليورانيوم في الدم كان في محافظه بغداد (0.135 ppm). تم حساب الفعاليه الاشعاعيه النوعيه لنماذج الدم في تلك المناطق وقد بلغت اعلى معدل في محافظه البصره (1.43 x 10 - 1Bq/g) واقل معدل (0.1258 x 10 - 1 Bq/g) في محافظه بغداد وكما تم حساب تركيز اليورانيوم في الدم للمصابين بمرض اللوكيميا وقد كان اعلى تركيز (1.841 ppm) في محافظه المثنى واقل (0.364 ppm) تركيز في محافطه ديالى.اما بالنسبه للفعاليه الاشعاعيه النوعيه فقد كان اعلى قيمه ) 0 - 1 Bq/g 1(1.79 x في محافظه المثنى واقل تركيز) (0.34 x 10 - 1 Bq/g في محافظه ديالى. لقد قورنت نتائج تراكيز اليورانيوم مع الحد المسموح به والمنشور من قبل الوكاله الدوليه للوقايه من الاشعاع (ICRP) وكذلك تم مقارنه نتائج حسابات الفعاليه الاشعاعيه النوعيه لنماذج الدم مع الحد المسموح به والمنشوره من قبل الوكاله الدوليه للطاقه الذريه (IAEA | This study includes measurement of uranium concentration and calculates the specific activity in human blood samples (leukemia and health people) taken from some governorates of Iraq by using fission fragment track technique.The nuclear reaction used as source of uranium fission fragment is U - 235 (n, f), obtained by the bombardment of U - 235 with thermal neutrons from (Am - Be) source which has a flux of (5 x 103 n.cm - 2. s - 1 ) , the concentration values were calculated by comparison with standard biological samples which prepared.The highest rate of uranium concentration in human blood was (1.654 ppm) in Basrah governorate and the lowest rate of uranium concentration in human blood was (0.153 ppm) in Baghdad governorate. And also calculate the specific activity for human blood samples in those regions and found that the highest rate was (1.43 x 10 - 1 Bq/g) in Basrah governorate and the lowest rate was (0.1258 x 10 - 1 Bq/g) in Baghdad governorate.The highest of uranium concentration was (1.841 ppm) for leukemia sample in Al - Muthana governorate and the lowest uranium concentration was (0.364 ppm) in Diyala governorate, and the specific activity was calculated for leukemia samples and found that the highest activity was (1.79 x 10 - 1 Bq/g) in Al - Muthana governorate and the lowest activity was (0.34 x 10 - 1 Bq/g) in Diyala governorate.Uranium concentration results compared with permissible limit who purplish from ICRP agency and the specific activity calculations for human blood samples compared with permissible limit who published from IAEA agency.

دراسة عامل الاستطارة الذرية للاشعة السينية للغلاف K والذرة كاملة للانظمة ذات الثلاث والاربع الكترونات Studying x - ray atomic scattering form factor for K - shell and total atom for three and four electron system

اسم المؤلف: رعد عيدان حليوت شنوف الكناني
اسم المشرف: خليل هادي احمد البياتي
الموضوع العام: علوم الفيزياء
السنة: 2006
الموضوع الدقيق: فيزياء الالكترونيات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: استخدمت تقنية التجزئة لتحليل انظمة الثلاثة واربعة الكترونات الى ثلاثة ازواج من الدوال الموجية الاكترونية لبعض الايونات المشابهة لذرة الليثيوم وهي (Li, Be+, B++), وستة ازواج من الدوال الموجية الاكترونية لبعض الايونات المشابهة لذرة البيريليوم وهي (Li - , Be, B+) باستخدام دالة الموجة لهارتري فوك (Hartree - Fock ) والمطورة بواسطة كلمنتي وروتي .(Clementi and Roetti)ان هدف البحث هو دراسة عامل الاستطارة الذري للغلاف K والذرة كاملة لانظمة الثلاثة والاربعة الكترونات.تكمن الاهمية الفيزياوية لعامل الاستطارة الذرية في علاقتة بالعديد من الخواص الذرية المهمة مثل شدة الاستطارة المتشاكهة وشدة الاستطارة الكلية ودالة الاستطارة غير المتشاكهة والمقطع العرضي للاستطارة المتشاكهة والمقطع العرضي الكلي للاستطارة غير المتشاكهة وثابت الحجب المغناطيسي والمقطع العرضي التفاضلي لاستطارة الالكترونات بوساطة الذرات وعامل التركيب الهندسي .كما تم دراسة دالة توزيع الكثافة القطرية للجسيم الواحد , بحيث ان عامل الاستطارة الذري هو تحويل فورير (Fourier transform) لكثافة الالكترون ρ(r1) وان , دقة النتائج دققت بواسطة حساب الطاقة الكلية. جميع النتائج حسبت باستخدام الوحدات الذرية | The partitioning technique has been used to analyze the three and four electron systems into three - pairs electronic wave functions for Li - like ions (Li, Be+, B++) and six - pairs electronic wave functions for Be - like ions (Li - , Be, B+) by using Hartree - Fock wave functions of Clementi and Rotti.In this work the atomic scattering factor f(s) for K - shell and total atom for three and four electron systems are studied. The physical importance of this factor appears in its relation with the several important atomic properties such as, the coherent scattering intensity, the total scattering intensity, the incoherent scattering function, the coherent scattering cross section, the total incoherent cross section, the nuclear magnetic shielding constant, the differential cross section of electrons scattering from atom and the geometrical structure factor. Also the one particle radial density distribution function D(r) has been studied, where the atomic scattering factor f(s) is the Fourier transform of the electron density ρ(r1) and . The accuracy of results was checked by determining the total energy. All results are calculated in atomic units.

كشف اشعة كاما للنويدات المشعة في انسجة بشرية GAMMA - RAYS DETECTION OF RADIONUCLIDES IN HUMAN TISSUES

اسم المؤلف: محمد سعد علي
الموضوع العام: علوم الفيزياء
السنة: 2006
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: وضعت هذه الدراسة لكشف وحساب الفعالية النوعية للنويدات المشعة في الانسجة البشرية المسرطنة التي تم استئصالها من مرضى مدينة بغداد باستخدام تقنية التحليل الطيفي لاشعة كاما بواسطة كاشف التالق ايوديد الصوديوم المطعم بالثاليوم (2×2 انج).استندت الدراسة الحالية على 26 عينة مصابة و8 عينات سليمة لمقارنة النتائج وقد شملت اربعة انواع من الانسجة الطرية (كلية, قولون, ثدي, رحم) والتي يمكن الحصول عليها بكتل كبيرة. اما عملية جمع العينات فقد تم الحصول عليها من قسم الهستوباثولوجي التابع للمختبرات التعليمية لمستشفى مدينة الطب ومستشفى الجراحات التخصصية.اخذت كل عينة بوزن 250 غم, غسلت بالماء المقطر لتخليصها من سائل الفورمالين (المادة الحافظة), قطعت ثم وضعت في وعاء مارنيلي بشكل منتظم, بعد ذلك فحصت بكاشف ايوديد الصوديوم المطعم بالثاليوم لفترة زمنية مقدارها 4 ساعات (14400 ثانية) وفولتية تشغيل مقدارها 530 فولت.قيست كفاءة الكاشف باستخدام مصدر (152 - uΕ) اما اطياف اشعة كاما لعينات النسيج فقد تم معايرتها وفقا لطيف كل من مصدر (137 - sC) و(60 - oC) و(22 - aN). تم رصد 6 نويدات مشعة في العينات المنتخبة حيث توزعت بين 2 - 5 نويدات في كل عينة وقد شملت : نويدتين (214 - Bi, 214 - bP) عائدتين الى سلسلة اليورانيوم؛ نويدتين (228 - Ac, 208 - lT) عائدتين الى سلسلة الثوريوم؛ نويدة صناعية واحدة (137 - sC)؛ والنويدة الطبيعة (40 - K).تراوحت الفعالية النوعية لليورانيوم الملاحظ (نواتج انحلال 238 - U) في العينات المصابة بين (1.02 - 7.46 بكرل/كغم) اما العينات السليمة فقد تراوحت بين (0.88 - 2.02 بكرل/كغم) وقد تراوحت الفعالية النوعية للثوريوم الملاحظ (نواتج انحلال 232 - Th) في العينات المصابة بين (0.59 - 4.84 بكرل/كغم) اما العينات السليمة فقد تراوحت بين (0.49 - 2.71 بكرل/كغم).رصدت نويدة (137 - sC) في جميع العينات المنتخبة بفعالية نوعية تراوحت بين (0.64 - 6.46 بكرل/كغم) في العينات المصابة اما العينات السليمة فقد تراوحت بين (0.5 - 3.46 بكرل/كغم), اما نويدة (40 - K) فقد ظهرت في جميع العينات المنتخبة ايضا لكن بفعالية نوعية اكبر مقارنة بالنويدات الاخرى حيث تراوحت بين (44.18 - 85.36 بكرل/كغم) في العينات المصابة اما العينات السليمة فقد تراوحت بين (40.62 - 56.95 بكرل/كغم). تشير النتائج الى ظهور نفس النويدات على الاغلب في كلا النماذج المصابة والسليمة لنفس النوع من النسيج لكن بفعالية نوعية اقل في النماذج السليمة. | This study is carried out to detect and measure the specific activities of radionuclides in cancerous samples of human tissues that excised from Baghdad city patients. The measurements were done using spectral analysis technique for gamma - ray with 2"×2" NaI(Tl) scintillation detector.Our present investigations are based on the study of 24 abnormal samples and 8 normal samples for comparing the results. These samples include four types of fresh tissues (kidney, colon, breast, and uterus) that may be obtained with great mass. These samples had been collected from the histopathology department for education laboratories in Madenat Al - Ttib and specialized surgical hospital. Each sample is taken with 250g in weight, washed with distilled water to remove the formalin liquid (conservator substance), cut, put in the Marenilli Beaker uniformly and then examined with NaI(Tl) detector for a period of 4 hours (14400s) and 530 V as an operating voltage.Detector efficiency was measured by using Eu - 152 source while gamma - ray spectra for tissues samples had been calibrated with respect to spectra of Cs - 137, Co - 60 and Na - 22 sources.Six radionuclides have been detected in the selected samples where distributed between (2 - 5) radionuclides in each sample. These radionuclides included : two radionuclides (Bi - 214 and Pb - 214) belonging to the uranium series; two radionuclides (Ac - 228 and Tl - 208) belonging to the thorium series; one artificial radionuclide (Cs - 137); and the natural radionuclide (K - 40).The specific activity of detected U - 238 (U - 238 decay products) ranged between (1.02 - 7.46 Bq/kg) in the abnormal samples and (0.88 - 2.01 Bq/kg) in the normal samples while the specific activity of detected Th - 232 (Th - 232 decay products) ranged between (0.59 - 4.84 Bq/kg) in the abnormal samples and (0.49 - 2.71 Bq/kg) in the normal samples.The artificial radionuclide (Cs - 137) is detected in all samples with specific activity ranged between (0.64 - 6.46 Bq/kg) in the abnormal samples and (0.5 - 3.46 Bq/kg) in the normal samples. The natural radionuclide (K - 40) is detected in all samples too, but with largest specific activity compared with other radionuclides where it ranged between (44.18 - 85.36 Bq/kg) in the abnormal samples and (40.62 - 56.95 Bq/kg) in the normal samples. The results indicate that same radionuclides are often appeared in both normal and abnormal samples for the same type of tissue but with least specific activities in the normal samples.

دراسة تحضير مادة كاؤلين دويخله كمالات في صناعة الورق A STUDY OF USING KAOLIN DUEKHLA AS FILLER IN THE PAPER INDUSTRY

اسم المؤلف: علي رزاق عبد الرضا
اسم المشرف: ازهار جواد داوود
الموضوع العام: علوم الفيزياء
السنة: 2006
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يتناول البحث دراسة تاثير خفض نسبة اكاسيد الحديد والتيتانيوم السيليكا الحرة من اطيان كاؤولين دويخله لغرض استخدامها كمالات في صناعه حشوه الورق.لما لهذه المكونات من تاثير على خواص الحشوه. يحتوي خام الكاؤولين المستخدم في هذا البحث على حوالي 1.7% من اوكسيد الحديد و1.2% من اكسيد التيتانيوم و51.16% من اوكسيد السيلكون من ضمنه12% من السيليكا الحرة. ويعتبر وجود هذه النسب من اوكسيد الحديد والتيتانيوم والسيليكا الحره ضمن الخام غير مرغوب في صناعة الورق , لقد اجريت معامله كيميائية لكاؤولين دويخله بهدف تنقيته من الشوائب التي يمكن ان تذوب بحامض الهيدروكلوريك حيث ثم الاستمرار بغسل الكاؤولين بالماء المقطر لتصل درجةpH الى قيمة خمسة . ثم تجفيفه لمدة 3 ساعات بدرجة حرارة من (40 - 60) م0 وبعدها تم طحن المسحوق بالمطحنة البورسلينيه لمدة 5 ساعات. ثم نخل المسحوق بمنخل ذو حجم حبيبي 65 مايكرون ليتم استخدامه في الدراسة. استخدمت في هذا البحث طريقة الترسيب, وقد اعتمد في طريقة الترسيب على فصل الاكاسيد المذ كوره من الاطيان استخدام ماده مشتته هي فوسفات الصوديوم. كما تم دراسة تاثير الماده المشتتة على لزوجة الخليط حيث تبين ان بزيادة الماده المشتته تقل نسبه اللزوجة الى ان تصل الى اقل قيمه. كما تم دراسة تاثير كبريتات الخارصين المائية كماده قاصرة على نموذج المجموعه M4 وباوزان تراوحت( بين10 الى 22 غم) من الماده القاصرة كخطوه ثانيه لتقليل نسبه الشوائب المذكورة والتي بالنتيجة تؤدي الى زيادة نصوعيه كاؤولين دويخله حيث تم ازالة حوالي 73% من اوكسيد الحديد,91% من اكسيد التيتانيوم, 15% من اوكسيد السيلكون, و50% من السيليكا الحرة في نموذج المجموعه G7. النتائج المستحصله تبين كفاءة هذه الطريقة في فصل الشوائب الغير مرغوب فيها اذ انخفضت نسبة اوكسيد الحديد المتبقي في الماده المعالجه (من 1.71% الى0.3%), واكسيد التيتانيوم ( من1.2% الى 0.09%), واوكسيد السيلكون (من 51.16% الى 39.7%). وكون الطريقة المتبعه في الفصل هي طريقة فيزيائيه فلم يلحظ حدوث تغير في خواص الخام بعد المعالجه, مما يمكنا استخدام الخام المعالج بهذه الطريقه في صناعات اخرى. | This study is carried out to investigate the possibility of using Iraqi clay; Duekhla kaolin as filler in the paper industry by reducing the percentage of iron oxide, titanium dioxide, and free silica. Duekhla Kaolin containe about 1.7% iron oxide, 1.2% titanium dioxide, 51.16% silicon dioxide, and 12% free silica. The existence of these oxides in kaolin is undesired in paper - making. The process started by washing Duekhla kaolin with (4N) HCl to remove all the soluble oxides which are not required in paper making. The washed kaolin then separated using filter papers and under a sequence of operations of dilution and filtering until the pH - value become 5. The separated materials then dried at temperature range 40 - 60 °C for 3 hours, and the dried powders then milled using ball mill of porcelain body, with different sizes of spheres, for 5 hours. Finally the powders of Duekhla Kaolin sieved with a sieve of 65 μm. The sedimentation method is used for the separation of the above mentioned oxides from clay by using sodium phosphate as dispersant agent. The viscosity parameter of the mixture was studied under the effect of the dispersant agent, and it was found that with the increasing of added dispersant agent the viscosity decreased to a minimum value which is equal to 0.31dyne.cm2/sec, after that the viscosity increased with the increasing of adding sodium phosphate. The study performed; depending on the minimum viscosity value corresponds to the dispersant amount added. The zinc hydrosulfite was used as a bleaching agent in a second step for removing the undesired impurities which implies to raise the brightness degree of kaolin Duekhla as a result. As a result of these treatment, the undesired oxides are reduced from sample G7 by the following percentages; (73% of iron oxide, 91% of titanium dioxide, 15% of silicon dioxide, and 50% of free silica removed), the results of this study reveals that the oxides percentages decreased from (1.71% to 0.3% in iron oxide, 1.2% to 0.09% in titanium dioxide, and 51.16% to 39.7% in silicon dioxide). The crystal structure of kaolin did not change after these treatments to decrease the percents of impurities in this clay to be used as filler in the paper industry

مسار الالكترون داخل المموج اللولبي لليزر الكترون الحر The Trajectory of Electron in Free Electron Laser Helical Undulator

اسم المؤلف: زينة محمود الداغستاني
اسم المشرف: محمد عز الدين الصندوق
الموضوع العام: علوم الفيزياء
السنة: 2006
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: نظرية البعد الواحد استخدمت لدراسة اداء مكبر ليزر الالكترون الحر عندما تملك حزمة الالكترونات توزيع منتظم للكثافة في مسار عمودي على محور المموج اللولبي مع اطوار ابتدائية منتظمة توزع بين فترة (0 - 2π ). لقد تم استخدم برنامج matlab 6.1 في بناء برامج الدراسة.في هذا العمل تمت دراسة لحركة الالكترون داخل المموج اللولبي واستنادا الى معادلات الحركة للالكترون فقد تم التركيز على العوامل الثلاثة التالية : 1 - المجال المغناطيسي2 - فترة المموج3 - عامل لورنتز حيث ان الزيادة في المجال المغناطيسي تؤدي الى الزيادة في نصف قطرمسار الالكترون وكمية السرعة المستعرضة للالكترون وبنفس الوقت تؤدي الى النقصان في كمية السرعة الطولية للالكترون. اما في حالة فترة المموج نلالحظ تكرار الظواهر اعلاه في حالة المجال المغناطيسي مع اختلاف السلوك الموجي للالكترون بسبب اختلاف المعادلات المستخدمة فى هذه الحالة.واخيرا الحالة الثالثة فان الزيادة في عامل لورنتز تؤدي الى النقصان في نصف قطرمسار الالكترون وكمية السرعة المستعرضة للالكترون وفي نفس الوقت تؤدي الى الزيادة في كمية السرعة الطولية للالكترون.الظواهر السابقة تمت مناقشتها حسب قانون حفظ الطاقة داخل المموج اللولبي. كذلك تمت المناقشة لدراسة تاثير طور الالكترون, المجال المغناطيسي للمموج وفترة المموج بوجود المجال الكهربائي للموجة الكهرومغناطيسة الداخلة( مثل موجة الليزر المراد تكبيرها) على كمية واتجاه السرعة الطولية للالكترون. حيث وجد ان هنالك زيادة في كمية السرعة الطولية للالكترون تحت تاثير نفس العوامل سواء ان كان مجال مغناطيسي او فترة المموج في هذه الحالة مقارنة مع الحالة الاولى التى تكون بغياب المجال الكهربائي. | The One - dimension theory is applied to study the performance of free electron laser amplifier when the electron beam have a uniform density distribution in the direction perpendicular to the helical undulator axis with initial phases uniformly distributed along the interval (0 - 2π). The matlab 6.1 program is used to built the computer programs that used in this work. In the present work, the motion of electron are considered inside the helical undulator. The equations of motion for electron inside the undulator, show that three effecting parameters, they are : 1 - Undulator magnetic field2 - Undulator period3 - Lorentz factorThe increase in undulator magnetic field leads to increase in the radius of electron trajectory, and the magnitude of transverse electron velocity and at same time leads to decreasing the magnitude of the longitudinal electron velocity.The above effects of undulator magnetic field be reapted in the case of undulator period. Owing to the differences in the equations that used in this case, it is found differences in waves behavior of electron.At last, the increase in Lorentz factor leads to decreasing in the radius of electron trajectory and magnitude of transverse electron velocity and also causes an increasing in magnitude of the longitudinal electron velocity.The effects above discussed as a result of the law of the conservation of energy inside the undulator.The motion of electron is also considered under the effect of the presence of electric field that may be as an electrical component of electromagnetic wave (laser). As comparing with first case (when there is no electric field), there are increasing in the magnitude of longitudinal electron velocity and a variation in electron energy. Within this case, the effect of the phase of electron, undulator magnetic field and undulator period are studied

تصميم وتحليل العدسه الشيئيه رباعية العناصر للمدى الطيفي (mµ 3.2 - 4.2) DESIGN AND ANALYSIS OF THE FOUR ELEMENTS OBJECTIVE LENS FOR THE 3.2 - 4.2µm SPECTRAL REGION

اسم المؤلف: صفاء عبد الستار عودة القيسي
الموضوع العام: علوم الفيزياء
السنة: 2006
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: اجري بحث حاسوبي لتصميم منظومه بصريه باربع عدسات شيئيه باستخدام برنامج ZEMAX وكذلك دراسة ملائمة بعض المواد(Si, Ge, AMTIR - 1, KRS - 5, ZnSe) التي تعمل ضمن منطقة الاشعه تحت الحمراء (3.2 - 4.2 μm) لعناصر المنظومه البصريه المصممه. اجريت عملية تحقيق الامثليه لايجاد بعض الخصائص البصريه والموصفات التصحيحيه الاكثر تفضيلا من حيث نمط الحيود وحجم البقعه الصوريه الناتجه وكذلك حجم وشكل المنظومه. ان النتائج الحاسوبيه التي تم الحصول عليهابواسطة برنامج ZEMAX اظهرت امكانية استخدام المواد المذكوره ضمن حدود صفاتها البصريه المتمثله بالابعاد البؤريه والزيوغ الكروي وتوزيع الشده والطاقه نسبة للمنظومه والصور المتكونه عند منطقة التحسس. تم اجراء مقارنه للنتائج مع التي حسبت بواسطة برنامج Visual Basic وظهر توافقا عاليا بينهما. ان مواصفات الانظمه البصريه التي قدمت في البحث الحالي قابل للتنفيذ عمليا. | A computational investigation in the present work has been used to design optical system (Four Elements Objective Lens) to show the suitability of some infrared materials (Si, Ge, AMTIR1, KRS - 5, and ZnSe) for the elements of optical designs with aid of ZEMAX package. Optimization process using merit function has been conducted to determine the must favorable optical properties (diffraction, aberration, size of spot, and size and shape of the system). Such designs have been operated in the middle infrared region of spectrum 3.2 - 4.2 μm. The computations obtained by the ZEMAX package shows the performance of those infrared materials through the parameters, focal length, back focal length, f - number, numerical aperture, field of view, Seidel sum for spherical aberration, intensity distribution and fraction encircled energy of the systems and images projected in the detection area. The results have been compared with those obtained with aid of Visual Basic program where a high degree of agreement has been found. The specifications of the optical systems that have been put forward in present investigation can be practically realized

دراسة ثابت الحجب النووي المغناطيسي للعدد الذري من 2 الى 10 A Study for Nuclear Magnetic Shielding Constant for Z = 2 to 10

اسم المؤلف: وسام احمد امين المشهداني
اسم المشرف: خليل هادي البياتي
الموضوع العام: علوم الفيزياء
السنة: 2006
الموضوع الدقيق: علوم الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

تاثير اعادة الاعتيان والتكميم على ضغط البيانات الصوتية الرقمية Effect of Resampling and Requantization on the Compression of Digital Audio Data

اسم المؤلف: شيرين عبد القادر مهدي السامرائي
اسم المشرف: لؤي ادور جورج ليث عبد العزيز العاني
الموضوع العام: علوم الفيزياء
السنة: 2005
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ان دراسة اعادة الاعتيان والتكميم للبيانات الصوتية الرقمية تعتبر من المواضيع المهمة حيث تستخدم لاغراض ضغط البيانات.في هذا البحث تم دراسة بعض طرق اعادة الاعتيان بواسطة تقليل عدد العينات مع الحفاظ على نوعية الصوت. ومن هذه الطرق المدروسة : Linear, Lagrange , Cubic Spline , quadratic, and Bezier’’وتم بحث معدل تقليل العينات بواسطة حذف جزء كبير من العينات ومن ثم اعادة العينات التي تم حذفها بواسطة طرق الاستكمال التي تم الاشارة اليها وتم تحديد درجة كفاءة كل طريقة من الطرق المدروسة باستخدام مقاييس معيارية منها نسبة تقييس الاشارة العظمى الى الضوضاء (Peak Signal to Noise Ratio)واثبتت طرق النتائج . كذلك تم في هذا البحث دراسة اعادة التكميم بواسطة الطريقة المتجانسة وغير المتجانسة وتم دراسة مراحل التكميم لكل طريقة مع الحفاظ على نوعية الصوت وكانت نتائج التكميم للطريقة المتجانسة افضل من الطريقة الغير متجانسة.بالاضافة الى ذلك فقد تم اختبار النتائج سمعيا وكانت عينة المستمعين من خلفيات مختلفة وتم استنتاج انه كلمزااد معدل تقليل البيانات ومراحل التكميم سوف تقل نوعية الصوت. | The study of the resampling and requantization methods of digital audio data is one of the major assets project. Which these methods used to compression the audio data. In this search the application of some resampling methods on the audio signal was investigated by reducing the number of samples while the audio quality is maintained. The considered resampling methods are the Linear, Quadratic, Cubic spline, Lagrange and Bezierand for each method the level of sampling reduction was investigated by applying the down sampling rate using and then up sampling using the above mentioned interpolation method. The efficiency of each method under consideration will be determined with the aid of quality criteria like peak signal to noise ratio (PSNR). The Lagrange, Cubic spline, and Beizer interpolation methods provided have the same results and good quality. Also in this search the results of applying the uniform and non - uniform quantization methods are presented the effect of the quantization steps on the audio quality investigated. The results proved the uniform quantization method is better than non - uniform quantization method.A listening test was used to prove the efficiency of each method, the test sample has different backgrounds and they prove when the decimation rate and the step of quantization increase the audio quality will be decrease

ترميم الصور الرقمية باستخدام خوارزمية المرشح التكراري Restoration of Digital Images Using an Iterative Tikhonov - Miller Filter

اسم المؤلف: هاله كاظم حسن
اسم المشرف: اياد عبد العزيز العاني
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: لقد تم تطبيق المعالجات الصورية في العديد من المجالات العلمية كعلوم الفيزياء والحاسوب والهندسة والكيمياء والبيولوجيا والطب. من المعروف ان عملية الحصول على الصورة باستخدام الطرق البصرية او الالكترونية والتي عادة ما تكون معرضة للتشويه من قبل بيئة المتحسس. مجال ترميم الصورة هو احدى مجالات معالجة الصورة الرقمية الذي يهتم بتحسين الصورة المشوهة. ترميم الصورة ممكن ان يكون خطي او غير خطي واعمى او غير اعمى. تم التركيز في هذا البحث على ترميم الصور الخطي والغير اعمى وفرض ان موديل تشوية الصورة هو عبارة عن التفاف داله الغشاوة بالصورة الاصلية واتلفت باضافة ضوضاء جمعية وان خوارزمية ترميم الصورة هي محاولة للتخلص من داله الغشاوة والضوضاء من الصورة المشوهة بفك التفاف دالة التشويه بالصورة المشوهة وتقليل الضوضاء لانتاج صورة مقدرة قريبة من الصورة الاصلية . الصور المستخدمة شوهت بواسطة دالة غشاوة كاوسية مختلفة الانحراف المعياري σ =1,2 وضوضاء كاوسية جمعية مختلفة بنسبة الاشارة الى الضوضاء SNR= 5,10, 20. التشوية استخدم لعدة انواع من الصور وهي الصورة الرمادية (صورة الستلايت )وصورة السونار (صورة الجنين) والصورة الملونة (صورة الطائر). وينر فلتر وفلتر ميلر - تكنهوف التكراري استخدمت لترميم الصور المشوهة. بواسطة مقياس جذر معدل مربع الخطاء لقد استنتجنا ان افضل اداء لوينر فلتر هو عندما يكون التشويه عالي اي ان نسبة الاشارة الى الضوضاء قليلة وافضل اداء لميلر - تكنهوف التكراري هو عندما يكون التشويه قليل اي ان نسبة الاشارة الى الضوضاء عالية. | Digital images are applied in various fields such us : physics, computer, engineering, chemistry, biology and medication sciences. It have been known that any images acquired by optical or electronic means is likely to be degraded by the sensing environment. Image restoration, is one of digital image processing field, which is care about improving the degraded image. Image restoration may be linear or non - linear and blind or non - blind. The following research focusing on linear non - blind image restoration and assuming that the degradation model as a convolution of the original image with blurring function and distorded by additive noise. Image restoration algorithms are trying to "undo" the blurring function and the noise from the degraded image by deconvolving the blurring function and reducing the noise from the degraded image to produce an estimate image, which it approach to the original image. The image have been used, blurred by Gaussian blurring function with selected standard deviation values σ = 1,2 and degraded by additive Gaussian noise with selected signal to noise ratio values SNR= 5, 10 and 20. The degradation have been used for three type of images, these are gray image (Satellite image), sonar image (Embryo image) and color image (bird image). Iterative Tikhonov - Miller filter and Wiener filter have been used to restore the degraded images. Using Root Mean Square Error (RMSE) measuring it have been concluded that, Iterative Tikhonov - Miller filter has better performance for less degradation parameters, with high SNR and Wiener filter has better performance for more degradation parameters, with low SNR.

دراسة الخصائص الطيفية لسلاسل نظائر نوى الهافنيوم والتنكستن باستخدام IBM وIBFM Study of Spectroscopic Properties in Isotopic Chain of Hf and W Nuclei Using IBM and IBFM

اسم المؤلف: عمار عبد الستار زغير الراوي
اسم المشرف: سعد ناجي عبود ليث عبد العزيز العاني
الموضوع العام: علوم الفيزياء
السنة: 2017
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم استخدام نموذج البوزونات المتفاعلة IBM لدراسة التركيب النووي لنظائر الهافنيوم 172 - 180Hf والتنكستن 180 - 190W حيث تم تحديد قيم معلمات معادلة الطاقة الهاملتونية H في نموذج البوزونات المتفاعة الاول IBM - 1 ونموذج البوزونات المتفاعة الثاني IBM - 2 لكل نظير من نظائر الهافنيوم والتنكستن عن طريق المواؤمة (fitting) مع مستويات الطاقة التجريبية المتوفرة. وكذلك تم استخدام هذه المعلمات لكل نظير لدراسة الانتقالات الكهربائية رباعية القطب B(E2) والانتقالات ثنائية القطب المغناطيسي B(M1) والعزوم رباعية القطب الكهربائي للمستويات المتهيجة الاولى Q(2_1^+) والثانية Q(2_2^+) وكذلك نسب الخلط بين الانتقالات الكهرومغناطيسية (E2/M1) والانتقالات احادية القطب الكهربائية B(E0) بالاضافة الى دراسة الازاحات الايزوميرية وازاحة النظائر، وتمت مقارنة النتائج النظرية (بنتائج IBM - 1 وIBM - 2 ) مع القيم العملية المتوفرة وكان هناك توافق جيد بينهما. تم دراسة المستويات المزدوجة التناظر ذات البرم العالي في IBM - 2 بالنسبة لتفاعل ماجيرونا ومنها مستويات ايريست ومستويات ايرير، حيث هذه المستويات تتميز بانها ذات طاقة عالية وE2 ضعيف مع انتقال M1 قوي مع تحديد البرمF (F - Spin) لكل مستوي.المستويات هي المستويات المزدوجة التناظر في نظائر Hf وW وهي المستويات التي تتميز بانها مستويات ذات فونون واحد او فونونين في سلاسل النظائر ذات الشكل γ - softالتي لها اعداد نيوترونية N قريبة من العدد السحري 82 باتجاه النظائر المشوهه نحو منصف القشرة.تم مناقشة مستويات الطاقة B(E2)، B(M1) والمستويات المزدوجة التناظر وتاثير عوامل ماجيرونا على مستويات الطاقة المتهيجة العليا لنظائر 180 - 190W باستخدام IBM - 2. وكان لتغير هذه العوامل تاثير كبير على خواص المستويات المزدوجة التناظر، تم مقارنة جميع النتائج التي حصلنا عليها مع القيم العملية المتوفرة وحصلنا على مقاربة جيدة.حيث وجد ان المستوي في 180W و182W هو اول مستوي مزدوج التناظر بينما في184W و186W هو اول المستويات المزدوجة التناظر في هاتين النواتين. تم حساب خصائص B(M1) ونسب الخلط وكذلك العوامل g - factors وM1 strength للنوى الزوجية للتنكستن 180 - 188W باستخدام IBM - 2.نظائر الهافنيوم (Z=72) تقع في المنطقة المشوهه بينما نظائر التنكستن (Z = 74) تقع في المنطقة الانتقالية باتجاه المنطقة المشوهة العليا. نسبة الخلط E2/Ml لبعض الانتقالات في نظائر172 - 180Hf و180 - 188Wتم حسابها لمستويات الطاقة المنخفضة الموقع وكذلك المستويات العليا (المزدوج التنافر) ومن قيم نسبة الخلط بعضها مقارب للبعض الاخر ومختلف عن القيم العملية بالاشارة وهي حساسة لقيم M1. وهنا تم الاعتماد على طرق جديدة في حساب الشحنات المؤثرة للبوزونات (e_π,e_v )وذلك لغرض استخدامها في حساب الانتقالات الكهربائية رباعية القطب. وكذلك الاعتماد على طرق جديدة وحديثة باتخاذ g - factor لحساب الانتقالات المغناطيسية M1.تم حساب طاقة فصل بوزترون من نوع نيوترون بالاعتماد على برامج متقدمة وجديدة ضمن برنامج NPBOS وكذلك حساب نسبة التفرع X(E0/E2) لكلا السلسلتين.الجزء الاخر من الدراسة تم تحليل مستويات الطاقة الموجبة ومستويات الطاقة السالبة لنظائر الهافينيوم والتنكستن الزوجية الفردية باستخدام نموذجي تفاعل البوزون - الفيرميون الاول(IBFM - 1) والثاني (IBFM - 2)، حيث تم ايجاد مستويات او مدارات الجسم المنفرد ذات التناظر السالب والموجب . وهنا تم استخدام برنامج ODDA وبرنامج PBEFM لحساب مستويات الطاقة والانتقالات الكهرومغناطيسية ونسب الخلط بينهما وتمت مقارنة النتائج النظرية مع القيم العملية المتوفرة.وكذلك تم اعتماد طرق جديدة في حساب الشحنة الفعالة للفرميون (e_F ) وكذلك حساب العامل الجيرومغناطيسي للفيرميون (g_F ) والذين استخدمناهما في دراسة الانتقالات الكهرومغناطيسية في نوى الهافنيوم والتنكستن الزوجية والفردية باستخدام (IBFM) | The interacting boson model (IBM) has been used to make a schematic study of (172 - 180Hf and 180 - 190W) isotopes. For each isotope of Hafnium and Tungsten determined the values of the parameters in the Hamiltonian of IBM - 1 and IBM - 2, which satisfied the best fit to the experimental data for energy levels. Beside on these values, can extrapolate to isotopes are extrapolated for which no experimental data founded and can make predictions for future experiments. We obtain the electromagnetic transition probability B (E2) and B (M1) by using the same values of these parameters for each isotope to, quadrupole moments for first and second excited states, mixing ratios and monopole transition probabilities B (E0), isomer and isotopic shifts and two neutron boson separation energy. Where our results had good agreement with the experimental data in general, although more experimental data we needed for the nuclear properties. The long range goal is to understand the origin of the IBM - 1 and IBM - 2 parameters in terms of a microscopic theory, such as nuclear shell and Nillson models. Results of schematic calculations are presented in various terms of F - spin symmetry in the Hamiltonian of the IBM - 2. Specific attention is paid to the effect of F - spin symmetry breaking on gamma to ground and gamma to gamma M1 transition in deformed nuclei. A comparison with available magnetic dipole moment transition probability M1 data in deformed nuclei is presented. The constraints implicit by these data on the form of IBM - 2 Hamiltonian in deformed nuclei are discussed. Mixed symmetry states are also studied. It is found that some of the mixed symmetry states with moderate high spins change very fast with respect to Majorana interaction. Under known conditions, they become the yrast state or yrare state. These states are difficult to decay and become very stable. This study suggests that a possible new mode of isomers may exist due to the special nature in their proton and neutron degrees of freedom for these isotopes. The mixed - symmetry and states or at least a fragment of it, have been identified in Hf and W isotopes. This enable us to trace the evolution of the one - phonon and two - phonon states in the even - even Hafnium and Tungsten isotopic chain from the γ - soft nuclei near N = 82 to the deformed nuclei towards mid - shell. In 180 - 190W isotopes, energy levels, B (E2), B (M1) and mixed symmetry states (MSS) have been discussed using IBM - 2. The effects of the Majorana parameters on the energy of the highly excited state have been investigated. The variation of these parameters has a great effect on the properties of MSS. All the calculated results were compared to the available experimental data and a reasonable agreement was achieved. It is found that the in 180W and 182W are the first 2+ mixed symmetry states, while the in 184W and 186W are the first 2+ mixed symmetry states. The B (M1) properties of even 180 - 188W isotopes are investigated in the IBM - 2. The (E2/M1) mixing ratios, g - factors, and summed M1 strength are calculated. A least - squares fit of the excitation energies is used to fix the IBM - 1 projected Hamiltonian parameters, while the F - spin - breaking terms are adjusted to reproduce the M1 properties of low - lying states. The influence of F - spin mixing on the summed M1 strength is studied using the coherent state technique in perturbation theory. The M1 properties of the low - lying states are described satisfactorily when the standard boson g factors are used, but the summed M1 strengths are found to be larger than the present experimental values. Possible g factor adjustment, which reconciles the calculated and experimental M1 strength, is discussed. The Hafnium (Z=72) lies in the deformed region and tungsten isotopes (Z = 74) lie in the transitional region that occurs at the upper limit of the range of the deformed nuclei. The - ray E2/Ml mixing ratios for the selected transitions in 172 - 180Hf and 180 - 188W are calculated in the IBM - 2. The Majorana parameters are found to have a great effect on the energy of mixed - symmetry states as well as on the sign and magnitude of the E2/M1 mixing ratios of transitions between regular (symmetric) states. The results demonstrate the sensitivity of the sign and magnitude of values on particular IBM - 2 parameters. In this study, analyzed the positive and negative parity states of odd Hf and W isotopes within framework IBFM - 1 and IBFM - 2. The results of an IBFM - 1 and IBFM - 2 multilevel calculations of and , single particle orbit are reported for the positive and negative parity states of the odd atomic mass number, A, Hf and W isotopes. Also, an IBM - 1 and IBM - 2 calculation by using ODDA and PBEFM programs is presented for the low - lying states in the even - even 170 - 180Hf and 180 - 190W core nucleus. The energy levels, B (E2) and B (M1) transition probabilities and mixing ratios are calculated and compared to the available experimental data. We found that the calculated positive and negative parity low spin state energy spectra of the odd - A 171 - 179Hf and 181 - 187W isotopes agree quite well with the experimental data.

تخمين الجرعة الاشعاعية للاشعة المؤينة وفوق البنفسجية باستخدام كواشف الاثر النووي Radiation Dose Assessment for Ionizing and Ultraviolet Radiations Using CR - 39 , Lexan and LR - 115 Nuclear Track Detectors

اسم المؤلف: فلا حاتم طه
اسم المشرف: حسين علي الجبوري
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The aim of this study is the radiation dose assessment of gamma rays - γ and ultraviolet - UV radiation on nuclear track detector - NTDs types CR - 39 , Lexan and LR - 115 through measuring the absorbance - A by using uv - visible spectroscopy technique and measuring the spectral deviation of Fourier transform infrared - FTIR technique .The radiation response for gamma rays was measured at low dose range 1Gy to 10 Gy and high dose range 10 Gy to 195 kGy .There is gamma ray response for all NTDs used in this study . Results revealed gamma radiation response at low and high radiation doses for Lexan and LR - 115 detector using optical absorbance - A ,while the radiation response for CR - 39 detector appears only at high dose range .The results show that absorbance - A increases with increasing of gamma radiation dose, where it was observed that Lexan detector has a radiation response much better than CR - 39 and LR - 115 detectors through measuring increasing in the absorbance - A value at the wavelength 800 nm . There is deviation in some of wavenumbers - W of FTIR spectrum measured for CR - 39 detector. This deviation appears at low dose range from 1Gy to 10 Gy with increasing of gamma radiation dose at wavenumbers - W 1405 and 1456 cmˉ ˡ , while the deviation does not appear in Lexan and LR - 115 detectors .Also, for uv - irradiation there is an increase in absorbance - A with uv - irradiation in dose at the range from 1 J/cm² to 360J/cm² . LR - 115 detector has uv - radiation response better than CR - 39 and Lexan detectors through measuring the increasing in absorbance - A at the wavelength 650 nm.The deviation in FTIR spectrum caused by uv - irradiation appears at the wavenumbers - W 1338 , 940 and 2907 cmˉˡ for CR - 39 , Lexan and LR - 115 detector respectively. The deviation in CR - 39 and Lexan detectors is more clear than in LR - 115 detector.From the results of this study , a possibility appears for the case of NTDs type CR - 39 , Lexan and LR - 115 as gamma and uv radiation dosimeters in medical and environmental fields.List of

تطور التركيب في نوى الباريوم الزوجية - الزوجية باستخدام نموذج البوزونات المتفاعلة Structure Evolution in the even - even Ba nuclei with IBM

اسم المؤلف: غفران عبد علي
اسم المشرف: سعد ناجي عبود
الموضوع العام: علوم الفيزياء
السنة: 2017
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The nuclear structure and electromagnetic transitions of even - even neutronrich 120 - 148Ba isotopes was studied in the framework of the collective models Interacting Boson Model (IBM - 1 and IBM - 2) and Dynamic Deformation Model (DDM). The reduced transition probabilities B(E2), B(M1), monopole matrix element  (E0) , mixing ratio  (E2/M1) and X(E0/ E2) of these isotopes was calculated. A set of parameters was used in the calculation to approach the values with the measured data. It was pointed out that Interacting Boson Model (IBM - 1 and IBM - 2) are equitably reliable for the description of spectra and other nuclear properties. It was found that there is a rapid transition between spherical and rotational shapes. In this work, we depend on new methods to evaluate the effective charges for proton and neutron boson ( )  e and ( )  e , and new method to calculate the gyromagnetic ratio for proton boson ( )  g and ( )  g .Mixed symmetry states are also studied. It is found that some of the mixed symmetry states with moderate high spins change very fast with respect to the Majorana interaction. Under certain conditions, they become the yrast state or yrare state. These states are difficult to decay and become very stable. This study suggests that a possible new mode of isomers may exist due to the special nature in their proton and neutron degrees of freedom for these isotopes. The mixed - symmetry 2 , 3  2 , 4    1 3 and 1 ,  states or at least a fragment of it have been identified in Ba isotopes. This enables us to trace the evolution of the onephonon and two - phonon states in the even - even barium isotopic chain from the γ - soft nuclei near N = 82 to the deformed nuclei towards mid - shell. The Dynamic Deformation Model (DDM) of Kumar and Baranger is employed for studying variations of the nuclear structure of light 120 - 140Ba isotopes. The potential energy surface parameters have been calculated and the low - lyingn levels spectrum is predicted along with the static and transition E2 moments.Comparison with experiment data and with other theories supports the validity of our treatment.The recent developments of the dynamic deformation model (DDM) make it readily applicable to a wide range of nuclei in periodic table. We study of the even - mass barium isotopes from N= 64 to the closed neutron shell at N= 84. Within this region there is experimental evidence for nuclei with the characteristics of vibrational, rotational or  soft level sequences. We show that the DDM model is well able to account for these features as typified by energy levels, electric quadrupole moments and gamma transition probabilities across this region when the only parameter which changes is the neutron number. For comparison the experimental data were also fitted to IBM - 2 and the results from these fits are in general in good agreement with those from the DDM.Supervisor Certification We certify that this thesis entitled ''Structure Evolution in the even - even Ba nuclei with IBM'' was prepared under our supervision at the University of Al - Nahrain Collage of Science Department of Physics, in partial fulfillment of the requirements for the degree of Master of science in physics.

تحضير المركباث الجديدة Sn - 1223 وCu - 1223 الفائقت التوصيل العالي من Hg - 1223 Preparation of Novel High Temperature Superconductor Compounds (Cu - 1223 and Sn - 1223) From Hg - 1223

اسم المؤلف: اسراء ماهر جمال
اسم المشرف: عماد خضير الشكرجي
الموضوع العام: علوم الفيزياء
السنة: 2017
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The main problem is the replacing of Hg atom by covalent atoms such as(Cu,Sn) atoms in the compound ((H )B C C ) by consider (x=0 - 1). Firstly, the high temperature superconductor of (HgB C C ) Hg - 1223 had been synthesized experimentally by solid state reaction. The high temperature superconductor (CuB C C ) Cu - 1223, (SnB C C ) Sn - 1223 had been synthesized by solid state reaction.There are many parameters affected the preparation technique such as flow of oxygen, sintering temperature and compacted pressure. The ceramic samplesof((HgB C C ),(CuB C C ) and (SnB C C ) was analyzed by XRD technique to show the phase of Hg - 1223. The XRD - pattern exhibited the presence of Hg - 1223, Cu - 1223 and Sn - 1223 like tetragonal phase incomparable with the ASTM data sheet.The analysis of XRD - pattern showed that the high phase Hg - 1223 was predominated in the crystal structure of all compound (CuB C C ) and (SnB C C ). The XRD - pattern with the aid of a computer software to determine the lattice parameters. The lattice parameters for Hg - 1223 were a=3.99 , b=3.99 and c=16.47 , the compound Cu - 1223 had a=4.171 , b=4.171 and c=16.743 and the compound Sn - 1223 had a=4.05 , b=4.05 and c=15.682 .The EDX analysis for all compounds was investigated to show the elemental ratio in the mixture in agreement with the applied concentration of elements. The SEM analysis for all ceramic samples were showed the surface morphology and then the nature of grains and their size. The Iodiometric Titration Method also had been used to show the oxygen excess that was the role to enhance the mechanism of superconductivity.The resistivity measurement plays an important role in proving the predominate phase and the superconductor behavior through the presence ofIXcritical temperature which was about 115 K, 128 K and 110 K for superconductor compounds Hg - 1223, Cu - 1223 and Sn - 1223 respectively. In order to remove the low phase Cu - 1212 appearance in the crystal structure of the high temperature superconductor compound Cu - 1223 and to improve the superconductor properties we repeated the sintering process. As a result the XRD analysis indicated that the low phase Cu - 1212 predominated in the crystal structure which was had tetragonal phase with the lattice parameters a=3.55 , b=3.55 and c=12.37 . The resistivity measurement was supported the low phase Cu - 1212 with critical temperature about 64 K.

تصميم وتصنيع غشاء رقيق من اكاسيد الزنك المضاد للانعكاس باستخدام تقنيات مختلفة Design and Fabrication of Antireflection ZnO Thin Film by Using Different Techniques

اسم المؤلف: نداء طه ياسين
اسم المشرف: علاء جبار غزاي
الموضوع العام: علوم الفيزياء
السنة: 2017
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: In this work single layer antireflection coating of ZnO thin film has been designed and fabrication on glass and PSi substrates using pulse laser ablation (PLA) and spin coating techniques.Mainly, the work, divided into two parts, first : single antireflection of ZnO thin film using modified characteristics matrix to satisfy zero reflection condition theoretically. Second : ZnO nanoparticle deposited on different substrates using PLA which including the effect of duration pulse of 1000, 1500, 2000 pulses, Energy of 600, 700, 800 mJ and type of solvent by methanol and distilled water have been fabricated studied. In addition, spin coating method have been employed to synthesis this film. Structural and optical properties of prepared films have been characterized using XRD, SEM and EDX, and UV - Vis, respectively.XRD results revealed that the ZnO thin film have hexagonal structure with polycrystalline in nature with preferred orientation of (002). In addition, crystalline size was increased with the increasing of duration pulses at methanol solvent at fixed energy of 700 mJ, besides; in distilled water solvent at 700 mJ have low crystalline size at duration pulse of 1500 pulse. While at fixed duration of 1500 pulse, the crystalline size has low valne at energy of 700 mJ . As well as, the film deposited on glass and PSi substrate using sol gel method have crystalline size of (96.83and 85.16) nm respectively. Narrow FWHM and no phase change has been observed in all cases. SEM images showed that for all cases the films were homogenous with some island and cluster then cracking started to obtain with the increasing of increase the pulse number. Expected of film on glass prepared using

بناء وتوصيف BNT - BKT - BT البيزوالكترك لخزن الطاقة Construction and Characterization of BNT - BKT - BT Piezoelectrics for Energy Harvesting

اسم المؤلف: نذير بشير محمود
اسم المشرف: عماد خضير الشكرجي
الموضوع العام: علوم الفيزياء
السنة: 2017
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Lead - free piezoelectrics are non - toxic, cheap and environmental friendlymaterials. Among them Bismuth Sodium Titanate (BNT) which has thechemical formula Bi0.5Na0.5TiO3 with a complex A - site perovskite structure. Inthis study, some modifications on BNT were used to help in applications byforming solid solution with Bi0.5K0.5TiO3 (BKT) and BaTiO3 (BT). The BNTbased(xBNT - yBKT - zBT) with x+y+z=1 ; were prepared via different methodsat the Morphotropic Phase Boundary (MPB) : 0.94BNT - 0.06BT , 0.93BNT - 0.07BT , 0.8BNT - 0.2BKT, 0.84BNT - 0.16BKT and 0.9BNT - 0.065BKT - 0.035BKT with their origin BNT , BKT and BT. Mini Database was proposeddepending on the results of international databases and some crystallographysoftware and plotted as phase diagrams. Several predictions were suggesteddepending on the built Mini Database and phase diagrams for the BNT - BKTBTsystem. The main prediction was : the physical properties either dependedon the changing of crystal structure ( polarization , dielectric constant ,piezoelectric coefficient ) or the properties had linearity with the composition (density, melting point , sintering temperature ). It has been focused on thestudying the crystal structure, dielectric measurements, hysteresis loopmeasurements and polarization fatigue analyses for ceramic samples.The samples were prepared by different methods : the hydrothermalmethod with spherical shape particles of 65nm - 600nm size; and by solid statereaction method. The powder were pressed in suitable template at 250MPa ,sintered according to database prediction "sintering temperature phase diagram", the resulted ceramic discs had relative density 90% - 96 %. These results agreed with the database predictions "sintering and density phase diagrams”.The crystal structure for the prepared samples were studied using X - ray diffraction (XRD) analysis, the XRD showed that the samples BNT - 6BT, BNT - 7BT, BNT - 20BKT, BNT - 16BKT and BNT - BKT - 35BT had the Morphtropic Phase Boundary (MPB) while BNT had the rhombohedral structure. BKT and BT had a tetragonal structure. These results agreed with the predictions "crystal structure phase diagram" The dielectric measurements showed that there were three regions for BNT - BKT - BT system; the first one was the samples with relaxor ferroelectric behaviors, the samples belonging to this region were BNT, BNT - 6BT, BNT - 7BT, BNT - 20BKT, BNT - 16BKT and BNT - BKT - 35BT (i.e. BNT and the MPB region). The second region was the samples with Normal ferroelectric behavior.The sample with this region was BT. The third region was the samples with relaxor - like ferroelectric behavior (weak ferroelectric) as in BKT. The Curie temperature for the samples within MPB was between 270℃ to 300℃, while for the origin : for BNT the Curie temperature was about 320℃; for BKT was about 370℃; and for BT was about 110℃. The depolarization temperature for samples within MPB region was below 100℃ (above room temperature) while for BNT was 250℃.The hysteresis loop measurements were studied both experimentally and theoretically. The study showed that the results for BNT were Ps=35μC/cm2, Ec=60kV/cm, for BKT was Ps=30μC/cm2, Ec=4.7kV/cm and for BT was Ps=26μC/cm2, Ec=9.8kV/cm, while for the samples within the MPB region the results were Ps=45μC/cm2, Ec ≈ 30kV/cm. The polarization had the largest value within MPB, which agreed with the first prediction by the proposed database (i.e. the polarization of BNT - BKT - BT system depends on crystal structure). The coercive electric (Ec) had a linear behavior with the composition. The value of Ec within MPB was in the range of 27kV/cm to 33kV/cm, which was half of the value for pure BNT. This result agreed with the second prediction by thedesigned database. The polarization fatigue analyses were performed depending on the fatigue model. The results showed that the polarization life cycle had the values of 1012 cycles for BNT, 1011 cycles for BT and 104 cycles for BKT, while within MPB region the polarization life had the largest value of about 1016 cycles which was much greater than in origin (BNT, BKT and BT). This result also agreed with the first prediction by the designed database (polarization life cycle had the largest value and depends on the crystal structure). The fatigue analyses predicted the value of applied electric field used in hysteresis loop measurements and the effect of cycle on the applied electric field.Finally, some of the problems were skipped and properties of BNT were enhanced by looking for the MPB region in the solid solution. The MPB showed the value for polarization to be larger than that in pure BNT, and it reduced the coercive electric field comparing to the original BNT. The polarization life cycle at MPB was much greater than in BNT. Therefore, this study could find some solutions for the drawbacks of BNT, and solve some problems for other piezoelectrics.

دراسة عامل تراكم الجرعة لاشعة كاما في الماء والكرافايت ضمن مدى الطاقة (10 - 4) م. ا. ف A Study of Gamma Ray Dose Buildup Factors in Water and Graphite, in the Energy Range (4 - 10) MeV

اسم المؤلف: حنان محمد جواد
اسم المشرف: ليث عبد العزيز العاني
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: لقد اجريت دراسات عديدة لقياس عامل التراكم لاشعة كاما بانواعه المتعددة لما له من اهمية في قياس الجرع الناتجة من استخدام الاشعة الكهرومغناطيسية وفي تدريعها. في هذه الدراسة تم حساب عامل تراكم اشعة كاما لاثنين من مواد التدريع (الماء والكرافيت) ضمن مدى الطاقة (4 - 10) مليون الكترون فولط، ولغاية سمك 5 معدل مسار حر, لتحقيق هذه الدراسة تم كتابة وتنفيذ برنامج محاكاة باستخدام لغة Visual Basic language اصدار Gوتطبيقه اعتمادا على اسلوب محاكاة مونتي كارلو.الفكرة الاساسية للبرنامج تشمل وصف السلوك الحقيقي للاشعاع والتنبؤ بحركتة العشوائية خلال الوسط. يمكن استخدام هذا الاسلوب لمحاكاة المسالة التقليدية (الكلاسيكية) الناتجة عن سقوط الاشعاع على شريحة مسطحة تعمل كموهن لاشعة كاما. الشكل الهندسي للمصدر المشع الذي اعتمد في هذه الدراسة هو مصدر مستوى عمودي احادي الطاقة.في هذا البحث تم دراسة عامل تراكم الجرعة لاشعة كاما بوجود وعدم وجود تاثير انتاج الزوج ولنفس الطاقة. كما تم دراسة عدد من المتغيرات المتعلقة بتصميم البرنامج والمسماة متغيرات المحاكاة والتي تتضمن عدد اشعة كاما التي يمكن تتبعها وعدد تقسيم مدى الطاقة. تم دراسة اعتماد عامل التراكم على كل من طاقة الفوتون الساقط, عمق الاختراق والعدد الذري لمادة الدرع في حساب عامل تراكم اشعة كاما اظهرت النتائج ان عامل تراكم الجرعة لاشعة كاما يتناسب عكسيا مع زيادة الطاقة. ويمكن تبرير هذا السلوك بما يلي : عند زيادة الطاقة (ضمن مدى الطاقة المدروس) فان احتمالية استطارة كومبتن تتناقص، لان تاثير كومبتون يتناسب عكسيا مع زيادة طاقة. كذلك فان زيادة الطاقة تؤدي الى زيادة قدرة اختراق اشعة كاما في الوسط وهذا يؤدي الى انخفاض احتمالية الاستطارة بزوايا صغيرة وهذا ينعكس على حساب عامل تراكم الجرعة (حيث انة الاستطارة بزوايا صغيرة لها دور كبير في حساب عامل التراكم ). لكل من الكرافيت والماء، اظهرت النتائج الى ان القيم المحسوبة من عامل تراكم الجرعة لاشعة كاما عند عدم وجود تاثير انتاج الزوج اقل مقارنة عند وجود تاثير انتاج الزوج حيث تبقى مساهمة استطارة كومبتن هي الغالبة مقارنة مع تاثيرالفناء(تاثير انتاج الزوج) ضمن مدى الطاقة (4 - 10) مليون الكترون فولط .النتائج التي تم الحصول عليها بالنسبة للماء من برنامج محاكاة مونتي كارلو في هذه الدراسة كانت قريبة جدا الى بعض النتائج التجريبية المنشورة بالمقارنة مع نتائج محاكاة مونتي كارلو التي تم الحصول عليها من بعض الابحاث المنشورة. حيث تعتبر المقارنة مع النتائج التجريبية افضل وسيلة للحكم على النتائج المستحصلة نظريا. | Several studies have been conducted to measure different type of gamma ray buildup factor for its importance in measuring the dose resulting from Electromagnetic rays use and its shieldingIn this study gamma ray buildup factor for two shielding materials water (Zeff =7.42) and graphite (Z=6) within the energy range 4 - 10 MeV and up to 5 thickness mean free path has been studied. To achieve this study a simulation computer program has been written (Visual Basic language version G) and applied depending on Monte Carlo simulation method. The basic idea of the program includes real radiation behavior description and prediction of its random movement through the media. This method can be used to simulate a traditional problem (classic) resulting from the fall of the beam on the flat slide works as attenuator for gamma rays. The radioactive source geometry adopted in the study is mono energetic normal plane sourceIn this research the contribution of annihilation effect on the calculation of gamma ray dose buildup factor has been studied in the same energy and within the studied energy range. This study also examining a number of variables related to the program design called simulation variables like number of gamma scenarios, number of divisions for energy. This research is also including study the effect of energy for the incident photon, shield thickness, and atomic number for shielding material on the calculation of gamma ray buildup factor. The results indicated that the gamma ray dose buildup factor is inversely proportional with energy increase. This behavior means that when the energy within the studied energy range is increased, the probability of Compton effect decrease, since the Compton effect is inversely proportional with energy. Second, the penetrating ability for gamma radiation is also increase and this leads to an decrease in the probability of scattering with small angels and finally it is reflected on the calculation of dose buildup factor (the scattering with small angels plays a very important role in the calculation of buildup factor). For both graphite and water, although the results indicated that the calculated values of dose buildup for plane source when the contribution of pair production is ignored, less in comparison when the contribution of pair production is taken in consideration but the contribution of Compton effect is still more predominant than the effect of annihilation within the range of energy (4 - 10) MeV.The results obtained from the performed Monte Carlo simulation program in this study are very closer to the published experimental results (error = 10.4%) in comparison with Monte Carlo simulation results (error = 40.58%) obtained from some published researches. The comparison with experimental result is the best way to judge on the accuracy of the results obtains theoretically

تصميم وتنفيذ متحسس لمعامل الانكسار باستخدام الالياف الضوئية البلورية PCF DESIGN AND CONSTRUCTION OF REFRACTIVE INDEX SENSOR USING PHOTONIC CRYSTAL FIBER PCF

اسم المؤلف: مريم عبد الجبار جاسم
اسم المشرف: سھى موسى خورشید الاوسي
الموضوع العام: علوم الفيزياء
السنة: 2018
الموضوع الدقيق: الفيزياء الذرية
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Photonic crystal fiber (PCF) provides the availability to insert somematerials that enable the materials inside the PCF that provides thematerials to interaction with the light directly where the sensitivity releasedfrom the PCF is higher than the conventional optical fiber. Because of theimportance of the refractive index in many industrial by use it as amonitoring tools, because the clearly relationship between the temperatureand the refractive index and because the clearly sensitive of the phase ofthe liquid - crystals (LCs) where it has a range of temperature to be stay as(LCs) to the temperature and when the temperature be above this range theLCs will be liquid , The aim of the thesis is construction refractive indexsensor using photonic crystal fiber by infiltrating some different materialsof LC such as EBBA (N - (4 - Ethoxybenzylidene) - 4 - n - butylaniline) andMBBA (N - (4 - Methoxybenzylidene) - 4 - n - butylaniline) inside threedifferent kinds of a hollow core PCF (HC - PCFs) like HC - 800 - 02, HC - 1550 - 02, and HC19 - 1550 and using three different laser wavelengthswhich were; 638nm, 850nm, 1550nm. This diversification in the use oftools enable to consider different cases of designed sensor and determine itssensitivity at each case, then one can estimate the perfect cases of thedesigned sensor.It is found that the highest RI sensitivity was 173.31 dBm/RIU forthe HC19 - 1550 infiltrated with the EBBA using the laser with wavelength638nm, while the highest temperature sensitivity was 0.2505 dBm/°C forempty HC - 1550 using the laser with wavelength 1550nm.

دراسة تاثيرات حزمة ليزر هيليوم - نيون واشعة كاما علي المشعع بجسيمات الفا باستعمال بعض CR - كاشف 39 التقنيات المطيافية Studying the Effects of He - Ne Laser Beam and Gamma Radiation on CR - 39 Detectors Irradiated by ? - particles Using Some Spectroscopy Techniques

اسم المؤلف: محمد محسن نعمة
اسم المشرف: ندى فاضل توفيق
الموضوع العام: علوم الفيزياء
السنة: 2017
الموضوع الدقيق: الفيزياء الذرية
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The aim of the present work was to study the effect of alpha - particles, gammarays and (He - Ne) laser beam on the track registration and optical properties of CR - 39 detectors. Twenty - four detectors divided into five groups. First group : include nine detectors were exposed to different powers of (1, 5 and 10 mW) of laser beam at times (5, 10 and 15 min) and then irradiated to alpha - particles from 226Ra source. Then it was measured following track parameters, track diameters - D, track density - ρ, and calculated the bulk etching rate - VB, track etching rate - VT, critical angle - Өc, etching efficiency - η, Sensitivity - S, etching ratio rate - V. The results show there was increased in the values of - D, ρ, VB, VT and Өc with increasing of the exposure times of laser beam at (1, 5 and 10 mW) powers, and decrease in the values of - η, S and V with increasing in the exposure time of laser beam at_1 mW power, while increasing within increase of exposed times of laser beam at (5 and 10 mW) powers. And found the appropriate etching time of CR - 39 track detector at etching time of - 4 h with NaOH etchant solation and - 6.25 N at temperature 60 oC. Second group : includes un - irradiated detector as a control. Third group : include five detectors from CR - 39 detector it was irradiated by gamma radiation from 60Co source with doses (300, 500, 800, 1200 and 1600 kGy). Fourth group : include third groups where it was exposed to laser beam at 10 mW power for 15 min. Fifth group : include nine detectors were exposed to powers - 1, 5 and 10 mW of laser beam at times (5, 10 and 15 min). The optical properties of detector were studied by using the UV - Vis. and FTIR spectroscopy.Where it was calculated the optical energy band gap and number of carbon atom to groups (Second, Third, Fourth and Fifth). The results of ultraviolet spectra show increasing in the absorbance - A of detector with increasing in the time exposure of laser beam at different powers and gamma doses, and also decreasing in the optical energy band gap and increasing in the number of carbon atom with increasing in the exposure time of laser beam at different powers and gamma doses. As for the FTIR spectra show change in the peak position of the bands detector to groups (Third, Fourth and Fifth).

دراسة خصائص انتقال لمتضمنات صوتي - ضوئي عالي السرعة والتردد Study The Transmission Characteristic of Acousto - Optic Modulators for High Modulator Speed and High Frequency

اسم المؤلف: لبابة عبد الكریم الجنابي
اسم المشرف: سھى موسى خورشید الاوسي
الموضوع العام: علوم الفيزياء
السنة: 2017
الموضوع الدقيق: الفيزياء الذرية
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Acousto optics is a science that studying the light and acoustic interaction for purposes of manufacturing modulators and sensors. The technology turned to the use of acousto optic to solve the problem of transforming the communication technology from the traditional one that used the radio signal in coaxial cable into the modern one that uses the laser light in the optical fibers. Also, this enables to overcome the problem of loss and attenuations that occur in the transmission lines using the traditional technology. More sophisticated methods are suggested to help communication researches; one of the most interesting acousto optic applications are the modulators. The modulators are manufactured for specific applications, such that the input energy power and light frequency are taken in to account. The modulator of this application can achieve high accuracy with some co - operation related to the suitability of used material.In the present research, a high speed and high frequency modulator are proposed based on the concept of acousto optic interaction. The occurrence of the interaction requires existence some experimental material arranged in uniform modulator template. The analysis enables to determine the requirements of the proposed modulator design. The newly proposed idea is the use of highly transparent material that absorbed the interference associated with diffraction. Four types of materials are used to test the proposed designed modulator; they are : LiNbO3, SiO2, TeO2, and Ge, the use of such materials offer rich considerable results especially when using different light frequencies to be input into the interaction system. The proposed modulator design is computerized implemented using Comsolsoftware with predefined characteristics are determined in the stage of the analysis and requirements. As a result, different results are obtained for different use of materials and characteristics.The results are examined using validation test, which includes some performance indications. These indications are achieved by two paths : the first is the measurements of operating parameters that obtained by Comsol directly, while the latter is related to computations of efficiency that achieved programming the theoretical relations using MatLab. Actually, the measurements in the first path are documented to ensure the acceptable performance of the proposed designed modulator, whereas the computations of the second path are recorded to ensure the high performance efficiency of the proposed modulator design. In general, the achieved results were matching the state of art given in most advanced literatures, which ensure the validation of the proposed design and correct paths of performance description.The results showed that the proposed modulator design performed the modulation test with an efficiency percent of about 95%, when using LiNbO3 material in the modulator head, and this efficiency is decreases lightly when using other materials. Besides, the employed measurements and computations are nominating the use of LiNbO3 material rather than others to be used in such types of modulators due to its suitable optical features.Frequent practice tests showed that the behavior of the modulator was acceptable and it is enjoying the ability to be improved. The encouraging results gave the opportunity to suggest some developments for future work in order to strength the modulation results.

تحضير التراكيب النانوية للمركب Ba1 - xCaxTiO3 ودراسة الخواص الفيرواليكتريك Synthesis and Characterization of Ferroelectric Ba1 - xCaxTiO3 Nanoparticles

اسم المؤلف: عقيل عبد الرضا خضير عباس
اسم المشرف: عماد خضير الشكرجي
الموضوع العام: علوم الفيزياء
السنة: 2018
الموضوع الدقيق: الفيزياء الذرية
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الدراسة تم تحضير المركب النانوي تيتانيت الباريوم كالسيوم Ba1 - xCaxTiO3 بقيم مختلفة لعامل التعويض (x) وهي 0, 0.25, 0.5, 0.75, 1. الطريقة المستخدمة في التحضير هي طريقة الهيدروثيرمال الكيميائية والتي تعتبر من الطرق المفضلة لتحضير تراكيب نانوية متبلورة وذات نقاوة عالية. درجة الحرارة المحددة للتحضير كانت 200 درجة مئوية والضغط كان 20 بار.الجسيمات النانوية المحضرة كان لها معدل حجم جسيمي يتراوح بين 20 الى 41 نانومتر. بعد ذلك تم كبس المساحيق بضغط قدره 127 MPa للحصول على اقراص بقطر 1 سنتيمتر. في المرحلة اللاحقة تم اجراء عملية التلبيد لهذه الاقراص بدرجة حرارة 900 درجة مئوية ولمدة اربع ساعات. معاملات التركيب البلوري والمجموعة الفراغية ومعاملات الشبيكة والحجم الجسيمي والحجم الحبيبي تم الحصول عليها من التحليلات التركيبية والشكلية مثل حيود الاشعة السينية والمجهر الالكتروني النافذ ومجهر التصوير الالكتروني. تم استعمال برامجيات خاصة مختلفة في تحليل النتائج مثل حيود الاشعة السينية والمجهر الالكتروني النافذ ومقارنتها مع النتائج الموجودة في قواعد البيانات العالمية مثل ICSD .اضهرت نتائج التحليلات اكتساب المادة طورا بلوريا متعدد باستثناء الشرط التعويضي x = 1 حيث وجد انه يميل لامتلاك طور منفرد. تم دراسة الخصائص الكهربائية المتمثلة بالقياسات العزلية الكهربائية للمركب Ba1 - xCaxTiO3 حيث تم اعتماد حالتين في هذه الدراسة, الاولى كانت تتضمن تغيير التردد وتثبيت درجة الحرارة, والثانية بتغيير درجة الحرارة مع تردد ثابت لغرض قياس ثابت العزل الكهربائي r)ɛ) ومعامل الخسارة (D) , وايضا تم قياس درجة حرارة كيوري (TC). لوحظ خلال البحث ارتفاع قياس درجة حرارة كيوري (TC) مع زيادة نسبة محتوى الكالسيوم Ca في المركب. وجد ايضا افضل قيمة لثابت العزل الكهربائي ودرجة حرارة كيوري هي عند الشرط التعويضي x = 0.25, لذلك توجد امكانية لهذه المادة للتطبيق في المتسعات وتطبيقات الانظمة الالكترونية عالية الفولتية | In this study, a nano - compound Ba1 - xCaxTiO3 (BCT) was synthesized with varying substitution x = 0.25, 0.5, 0.75, and 1. The method used for synthesis is the hydrothermal chemical process, which is preferable to produce ultrafine, pure, and crystalline nanostructures. The material was synthesized at 200 ℃ and was 20 bar pressure for 24 hours. Barium acetates, calcium acetates, and titanium tetrachloride were used as starting materials. The synthesized nanoparticles had a range of particle size (20 - 41 nm). The powder was pressed into a pellets at pressure 127 MPa to get a diameter 1 cm and thickness 2 mm. Then, these pellets were sintered at 900 ℃ for 4 hours. The parameters of the crystalline structure, space group, lattice constants, particle size and grain size were obtained from the structural and morphological, and topological analyses (i.e., XRD, TEM, and SEM). Special different software were used for analyzing, and specification of the structural and morphological results so as to make a comparison with international results and databases like ICSD. The nano powders produced has a polycrystalline structure, except at substitution (x=1), which possesses a single phase structure. Dielectric measurements for Ba1 - xCxTiO3 were achieved. Two conditions were considered in the study. The dependence of dielectric constant (ε_r) and dielectric loss (D), on temperature and frequency was measured at constant frequencies and temperatures respectively. The values of Curie temperature (TC) were determined from the dielectric measurements. It is found that the values of Curie temperature were shifted toward higher temperatures as a result of increasing the calcium ratio in the compound. The composition Ba0.75Ca0.25TiO3 (x = 0.25), reported the best results which are related to crystalline phase, morphology, dielectric constant and Curie temperature relatively, so it is recommended in capacitors and high voltage power electronic applications.

السلوك التلبيدي والخواص العزلية للمتراكب MgAl204 - Al Sintering behavior and thermal insulating properties of (MgAl204 - Al) spinel composite

اسم المؤلف: علي حسين صالح
اسم المشرف: قاصد عبد الستار صالح الجنابي
الموضوع العام: علوم الفيزياء
السنة: 2017
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Spinel - Aluminum composites are drawing greater attention due to their low density, excellent physical, mechanical and refractory properties. This work aims to study the preparing one of the most current conventional technique and sintering behavior of Spinel - Al composite through characterization of the physical, mechanical properties as well as XRD and microstructure of the synthesis Spinel - Al composite specimens.Magnesia (MgO) and alumina (Al2O3) were used as starting materials to prepare stoichiometric magnesium aluminate spinel (MA) via single stage firing process (solid state reaction).Spinel (reinforced material) which prepared at sintering temperatures 12000C and 14000C for 2h soaking time was added in different weight percentage, i.e. 2,4,6,8 wt.% to the aluminum (matrix material) for synthesis Spinel - Al composites in a temperature range of 450 - 6500C via solid state reaction (SSR). The sintering parameters, XRD, microstructure, mechanical and thermal properties of the Spinel - Al composite products were investigated as well as the influence of each of the synthesized spinel contents and sintering temperature on sintering behavior of the composite products were also discussed. The results show that the better sintered density, water absorption, compressive strength, and thermal conductivity of the composite products obtained at low amount addition of spinel fired at 1200 and 14000C was 2wt.% and at 6500C.Also, studying of X - ray diffraction (XRD) for prepared spinel - aluminum composite specimens showed that the composites has many crystalline orientations (38.70, 44.970, 65.30 and 60.190), (390, 45.20, 65.620 and 60.330), (38.90, 45.150, 65.470, and 60.40) and (38.850, 45.260, 65.60 and 60.40) corresponding to (111), (200), (220) and (333) for 2,4,6,8wt% of spinel respectively.The studying of the morphology of spinel - aluminum composite specimens reveal that average grain size of reaches about 6.03, 6.17, 6.22, 6.3 (μm) for 2, 4, 6, 8 wt.% of MgAl2O4 fired at 12000C respectively, whereas their average grain size reaches about 7.18, 7.57, 7.9, 8.48 (μm) for the same spinel content fired at 14000C respectively.

تحضير ودراسة جسيمات الفضة النانوية وتاثيرها المضاد للبكتيريا Preparing and Studying Nano Silver Particles and Their Anti Bacterial Effect

اسم المؤلف: سماح صباح عبد الرزاق
اسم المشرف: ثامر عبد الجبار جمعة
الموضوع العام: علوم الفيزياء
السنة: 2017
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The target of this research is to prepare nano silver particles by laser ablation in both deionized and magnetized water. The properties of nano silver particles and their bacterial effects with different parameters’ were studied. The magnetic water was laboratory preparing by square magnets with magnetic flux of 200 mT applied on the deionized water which pass through it 10ns Q.swiched Nd - YAG laser of wave length 1064nm with different energies and different laser pulses number were used with and without applied electric field. Optical properties for the nano silver colloidal by UV - Vis technique was investigate. The absorption for the silver spectrum was found lied at 420 - 430nm, i.e. involved visible region. The absorption peaks have different height due to different both the shape and concentration of nano silver in the colloidal.TEM technique was used for investigating both size and shape of nano silver particles. The nano silver particles have different shapes such spherical, spindles, etc…. depending upon two parameters is laser energy and laser pulses number. The effect of nano silver particles on bacteria growth of three types of bacteria (staph, ps., E.coli) were studied in details under effect of applied electric field of 3000V/m. There is no inhibition zone was obtained when used different silver colloidal except the colloidal prepared under 600mJ and 1000laser pulses, where this colloidal gives an effected property and ability to determine the bacteria growth type ps. In the range of inhibition of 25nm.The results of the TEM show that the shape of nanoparticles affecting the growth of bacteria was spherical and its size ranges between32 - 50nm.

محاكاة لمتحسس بايولوجي باستعمال الالياف البلورية الفوتونية Simulation of Biosensor Using Photonic Crystal Fiber

اسم المؤلف: زينة خليفه حمد الدليمي
اسم المشرف: احمد كمال احمد
الموضوع العام: علوم الفيزياء
السنة: 2018
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تشكل الياف القلب المجوف والقلب الصلد النوعين الرئيسين من الالياف البلوريه الفوتونيه, ان وجود ثقوب هوائيه في هذه الالياف يساعد على حجز الموجات الكهرومغناطيسيه داخل منطقه القلب كما يساعد في تغيير خصائص الانتشار في الالياف.ان امكانية ملئ هذه الالياف بالسوائل يساعد على تطوير خصائصها البصريه. في هذا البحث تمت دراسة نوعين من الالياف البلوريه الفوتونيه كعناصر تحسس في القياسات الاحيائيه.تم دراسة تاثير حقن الليف البصري بسوائل مختلفه نظريا باستخدام طريقة العناصر المحددة. نفذت عملية حقن الليف المجوف (ماخوذ من القلب 19 خليه) وليف مجوف(ماخوذ من القلب 7 خليه) بسوائل مختلفه ( الماء, الماء الثقيل, بينتانول , دم انسجة الكبد البشريه, دم انسجة القالون البشريه والدم لبشرة الجلد). حسبت خسارة الحبس نظريا باستخدام عدة اطوال موجيه لليف البلوري الفوتوني, وجد ان خسارة الحبس تتناقص تدريجيا للاطوال الموجيه الاصغر كلمزااد معامل انكسار الماده المحقونه. وحسبت قيمة التحسسيه نظريا بالاعتماد على تغير الفقدان في حجز الضوء للنمط الاساسي لليف المحقون بالسائل.وجد ان اعظم حساسيه كانت في مادة الدم لبشرة الجلد وتساوي 674.603 لكل معامل انكسار لنوع وافضل مجال كهربائي وجد لنفس الماده انه يساوي 671 لكل فولت على متر.بينما اعظم حساسيه في نوع وجد انها تساوي 147.201 لكل معامل انكسار لمادة القولون وافضل مجال كهربائي كان في هذه الماده ويساوي 366 لكل فولت على متر. تم اخذ الالياف البلوريه الفوتونيه مصمه باقطار مختلفه وايجاد توجيه الليزر باطوال موجيه تتراوح من (1600 - 600) نانومتر داخل الليف البصري البلوري باستخدام برنامج | Solid and hollow cores comprise two sorts of photonic crystal fibers (PCF). The presences of air holes in PCF serves to both confine electromagnetic waves within the core of the fiber and manipulate its propagation characteristics. the potential of filling the PCF with liquids may improve their optical characteristics. In this thesis, both sorts of PCF were investigated as sensing measurements of biological elements. The impact of liquid filling hollow core PCF was studied theoretically using finite element method. Infiltrated HC19 - 1550 (19 cells are taken from the core) and HC - 1550 (7 cells are taken from the core) PCFs with different liquids (water, heavy water, pentanol, colon tissue, liver tissue and epidermis human skin) were applied. Confinement loss was computed theoretically and found that the confinement loss decreased to shorter wavelengths with increased the refractive index of the liquids. Amplitude sensitivity was computed theoretically by deeming the change in confinement loss for the fundamental mode of liquid filled PCF. The maximum amplitude sensitivity was found to be 674.603 in epidermis blood and the best electric field was found to be 671 V/m in the same liquid for HC19 - 1550, while the maximum sensitivity in HC - 1550 is 147.201 for colon tissue with best electric field found to be 260 V/m also in the colon tissue. Photonic crystal fiber has been taken in different diameters and laser guided by wavelengths from (600 nm - 1600 nm) inside the optical crystal fiber using Comsol multiphysics program

استخدام طريقة للتبع نقطة الطاقة القصوى على اساس الحرارة للسطوح الكهروضوئية باستخدام برنامج PSPICE Maximum Power Point Tracking approach based on Temperature for PV Surfaces using PSPICE program

اسم المؤلف: حارث محمد سعيد حامد
اسم المشرف: زينب منذر يونس كبة
الموضوع العام: علوم الفيزياء
السنة: 2017
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: This research study the effect of Photovoltaic surface temperature on Photovoltaic panel output characteristics. First, circuit simulator PSPICE was used to compose Photovoltaic panel model at 75 W, 4.8 A and 21 V. Then, study the behaviorof it under varying conditions (solar insolation, environmental temperature and PV panel surface temperature). ABM feature of PSPICE was used to include the above parameters in PV PSPICE model and produced temperature dependent voltage. The voltageconverted to current with galvanic insolation by element Gploy with gain 0.8. The model defined as hierarichal block in PSPICE library and could be called as individual source for any applications.After studying the effect of PV surface temperature on its (IV) curves specially the position of the maximum power point, this temperature was used to keep tracking of the optimal voltage for the PV panel at the MPP. Therefore DC - DC boost converter was used to achieve this purpose.Boost converter was raise a PV panel voltage from 17 V to 34 V for all variation of surface temperature from 300 K to 350 K at frequency 10 KHz and ΔVo = 5 V.

تاثير المسافة بين الاقطاب ومادة الهدف باستخدام الترذيذ المغناطيسي ذو التيار المستمر The Effects of Electrodes Separation and Target Material by DC Discharge Magnetron Sputtering

اسم المؤلف: بان فيصل رشيد
اسم المشرف: خالد عباس يحيى
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تتكون منظومة الترذيذ البلازمي من حجرة تفريغ اسطوانية مصنوعة من مادة (Bolosilicate) وتحتوي على قطبين دائرين من st. st. يحمل الكاثود, مادة الهدف وكذلك المغناطيس الثابت اما قطب الانود فيحمل النماذج الزجاجية التي سوف يتم طلاءها .في هذا البحث استخدمت مادتي الذهب والفضة كمادة لهدف. الهدف من هذه الدراسة, هو دراسة تاثير عوامل التشغيل مثل, المسافة بين القطبين ونوع مادة الهدف على خصائص اشكال سطح زجاجي مطلي بوجود المجال المغناطيسي والتي تمت دراستها باستخدام مجهر القوة الذرية (AFM). وايضا تم تحديد درجه حرارة الالكترون وكثافة الايونات والالكترونات واعلومات البلازما الاخرى بواسطة مجس لانكمور المنفرد عند ضغط ثابت (0.2 mbar).اظهرت نتائج هذه الدراسة بينت وجود زيادة خطية في كثافة الالكترونات والايونات وانخفاض اسي في درجة حرارة الالكترونات عند تغير المسافة بين القطبين ولخمسة قيم و(3,4,4.5,5 and 6)cm لمادتي الذهب والفضة وايضا تبين ان فولتيات التفريغ باستخدام الذهب كهدف هي اكبر منها في حالة الفضة. كذلك, وجد انه بزيادة المسافة بين القطبين فان درجة حرارة الالكترونات تقل لمادتي الذهب والفضة وكثافة الايون تزداد مسببة زيادة في قطر وارتفاع الحبيبة لتيار الترذيذ((I_d=30 mA باستخدام الذهب بينما يقل قطر الحبيبة ويزداد ارتفاعها باستخدام الفضة لتيار الترذيذ( (I_d=40 mA. من ناحيه اخرى, ان قيم درجة حرارة الالكترون باستخدام الفضة هي اكبر من القيم باستخدام الذهب وان علاقة قطر الحبيبة, وارتفاعها وخشونة السطح كدالة للمسافة بين القطبين هي ليست خطية. اصغر قيمة لمعدل قطر الحبيبة وارتفاعهاحصلنا عليه هو(90 nm) وnm)6) على التوالي لمادتي الذهب عند تبار الترذيذ ((I_d=30 mA و( . (d=4 cm وللفضة نفس قيمة قطر الحبيبة باستخدام الذهب عند(d=5 cm) لكن بارتفاع5.5 nm) ) عند (d=4 cm) ولتيار الترذيذ (I_d=40 mA). واصغر معدل ارتفاع للحبيبة لكل تيارات التفريغ 20,30,40,50 and 60 mA)) عند نفس المسافة بين القطبين (d=4 cm) باستخدام الفضة والذهب ولكل تيارات التفريغ ماعدا((〖 I〗_d=50 mA والذي يمثل اكبر معدل ارتفاع للحبيبة فيه باستخدام الذهب. واخيرا, ناتج عملية الترذيذ باستخدام الفضة اكبر مما عليه باستخدام الذهب. | In this work, a DC planner magnetron sputtering system used. Which consists of a cylindrical chamber, made from (Borosilicate). It contains two circular electrodes made from stainless steel. The cathode electrode is carried the target material and permanent magnet while a glass sample, which must coat, is placed on the anode electrode. In this works, gold and silver used as a target materials. The objective of this study is to examine the effects of operating parameters such as, electrodes separation, sputtering current, and type of target materials on the properties of glass surface coated under the influence of magnetic field. The surface morphology for the coated samples are studied by atomic force microscopy (AFM). Furthermore, electron temperature, ion and electron densities and other plasma parameters are determined by a cylindrical single Langmuir probe where the pressure up to(0.2 mbar). It is found that a linear increase in electron and ion densities and an exponential decrease in electron temperature with five values of electrodes separation (3,4,4.5,5 and 6) cm. That was observed for gold and silver target materials. Also, the discharge voltage using gold target is greater than that for silver target. Electron temperature decreased for gold and silver targets as the electrodes separation increased. The ion density increased which caused increasing in average grain diameter, height at sputtering current, Id=30 mA , when the target is gold. However, the average grain diameter is decreased and the height of grain increased at Id=40 mA using silver target. On the other hand, the values of electron temperature using silver target is greater than that for gold target. Also, the relation of average grain diameter, height and roughness surface as a function of electrodes separation are nonlinear. The minimum average values of grain diameter, height are (90 nm) and (6 nm) respectively for using gold at Id =30 mA and d=4 cm. For using silver at Id =40 mA the minimum average grain diameter is also (90 nm) at d=5 cm and height is (5.5 nm) at d=4 cm. For all discharge currents (20,30,40,50 3and 60 )mA , the minimum average grain height at the same electrodes separation d=4 cm for using silver and gold target except the value of Id=50 mA, whom a maximum average grain height is obtained. Finally, the sputtering yield for silver target is greater than that for gold target

تقييم السطح البيني لمنطقة الربط الكرافيت بالمعدن Evaluation of the Intermediate Layer of Graphite Bonded Metal

اسم المؤلف: مريم بديع عبود
اسم المشرف: ثامر عبد الجبار جمعة
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: This work investigates the joining between graphite and stainless steel grade (410), by using active filler metal paste. Brazing technique was chosen because it is efficient, verstile, fast and economical.These new phases considered enhancement the bonding strength of the assembly.

تصنيف الاداء الموجه وغير الموجه لصور الاقمار الاصطناعية Supervised and Unsupervised Classification Performance Satellite Images

اسم المؤلف: حسن سالم عبد المجيد
اسم المشرف: ليث عبد العزيز العاني
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: One of the main purposes of remote sensing satellite images is to interpret the observed data and classify features. Satellite image classification plays a major role in the extraction and interpretation of valuable information from massive satellite images.The primary purpose of this research is to classify multi - spectral Thematic Mapper satellite images using supervised classification. Unsupervised (RGB color model) and supervised classification (maximum likelihood method) is adopted to achieve the classification purpose. The classification accuracy depends upon the selection accuracy of the training area.PCA Transform is adopted and applied on the original bands to create the principal component images. The first three principle component image contains most the information in all the original bands. For this purpose the first three principle component images are chosen as RGB images to create a colored image.This colored image has been employed for determining and selecting the training areas which are very important for supervised classification after applying histogram equalization enhancement method on the colored image to make the selection of the training area more clarity and accuracy. After that the selection of the training areas is ready as an input for the supervised classification.Our results showed that the image with higher variance value doesn't represent a prerequisite in image clarity. The variance with mean value may reflect the quality of the image. The variance and means look like the torque in physics. So that we can see that the image with low variance and mean value near the middle of the dynamic range value has more quality than the image with high variance and mean value near the edge of the minimum or maximum value. Improve the selection of the training area (region of interest) visually plays an essential role in increasing the accuracy of supervised classification and this reflects on the calculation of the area for each class in the scene. In the present work, the overall accuracy increased from 68.5% to 98.9%after adopting the histogram equalization technique as an enhancement technique in improving the selecting the training area visually.Although a high classification accuracy with principal component image, but still the classification process with original bands is better because its values represent the real spectral reflectance. The result of classification accuracy with the original bands is enhanced from 68.5% to 97.08% and became very comparable with the result of classification accuracy with the principal component images 98.86% when the selection of the training area (region of interest) has been improved visually.In this thesis, the ENVI (Environment for Visualizin Images) software version 4.5 has been used to achieve the aim of this study.

تحضير النشاط الاشعاعي وتقيم مخاطره الاشعاعية لبيئة مصفى الدورة والمناطق المحيطة به

اسم المؤلف: جعفر جليل سلطان الطائي
اسم المشرف: ندى فاضل توفيق
الموضوع العام: علوم الفيزياء
السنة: 2013
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The objectives of the present study were to measure the level of the radioactivity Al - Dora refinery and surrounding area. The study includes : The first. the radon gas concentration in soil samples from Al - Dora refinery and dust samples from surrounding area by using "sealed can technique" and CR - 39 track detector to registration alpha tracks emitted from radon gas in (soil and dust) samples. The second. Detect of the radionuclides and measure the specific activities in soil and water samples using gamma ray spectroscopy system with HPGe detector. The measured soil, water and dust samples were taken from (40) samples, 27 soil samples (surface, 15 and 30cm depth), 8 water samples and 5 dust samples. The detecting of naturally occurring radionuclides (226Ra belong to 238U series, 228Ac belong to 232Th series and one natural radionuclide 40K) in the (soil and water). And estimate the radium equivalent (Raeq), absorbed dose rate in air (ADRA), hazard index (Hex, Hin) and annual effective dose equivalent (AEDE) in soil samples of Al - Dora refinery and surrounding area.The radon concentration in surface soil samples ranged from (290.709 to 394.534 Bq/m3 with an average 365.925 Bq/m3). The radon concentration in soil at the depth 15 cm was ranged from (294.862 to 346.775 with an average 324.164 Bq/m3) and at the depth 30 cm was ranged from (228.633 to 288.414with an average 254.947 Bq/m3). The surface exhalation rate in surface soil samples ranged were ranged from (0.601, to 0.816 with average 0.757Bq·m−2.h−1), in soil samples at the depth 15 cm ranged from (0.61 to 0.717 with average 0.671 Bq·m−2·h−1) and in soil samples at the depth 30 cm ranged from (0.47 to 0.597 with average 0.527 Bq·m−2·h−1). The mass exhalation rate in surface soil samples were ranged from (0.469 to 0.639 with average 0.59 Bq·kg−1·h−1), in soil samples from depth 15 cm ranged from (0.457 to 0.559 with average 0.523 Bq·kg−1·h−1) and in soil samples at the depth 30 cm ranged from (0.368 to 0.465 with average 0.411 Bq·kg−1·h−1).The specific activities for radionuclides (226Ra, ٢28Ac) in surface soil samples were ranged (from 11.725, 15.41 to 59.08, 36.17 Bq/kg respectively) with an average (33.621 and 22.375 Bq/kg respectively) and the specific activity of 40K radionuclide ranged (from 328 to 424.9 with average ٣٦٣.٤٥ Bq/kg). At 15 cm depth ranged (from 18.047, 14.613 to 39.71, 21.673 Bq/kg respectively) with an average (30.527 and 19.66Bq/kg respectively), the specific activity of 40K radionuclide ranged (from 201.3 to 391.3 with average٣٢٦.٧٣ Bq/kg). At 30 cm depth ranged from 17.94, 12.89, to 45.766, 23 Bq/kg respectively) with an average (30.393 and 18.124 Bq/kg respectively), the specific activity of 40K radionuclide ranged (from 231.4 to 351.3 with average ٣١٠.٩٤Bq/kg).For water samples ranged (from 1.60, 1.025 to 8.805, 13.52Bq/kg respectively) with an average (5.031 and 2.925 Bq/kg respectively), the specific activity of 40K radionuclide ranged (from 11.462 to 18.58 with average ١٥.٧٧٨Bq/L).The average values of Raeq, Hin, Hex, ADRA, and the annual effective indoor and outdoor doses in soil and water samples were, in surface (93.70 Bq/kg, 0.309, 0.226, 39.755 nGy/h, 0.198 mSv/y, 0.049 mSv/y), in 15cm depth (83.582 Bq/kg, 0.34, 0.2٥2, 44.34 nGy/h, 0.227 mSv/y, 0.055 mSv/y), in 30 cm depth (80.253 Bq/kg, 0.299, 0.217, 38.051 nGy/h, 0.189 mSv/y, 0.047 mSv/y), and in water (10.428 Bq/kg, 0.042, 0.028, 4.788 nGy/h, 0.024 mSv/y, 0.006 mSv/y).

معالجة رقمية وتحليلية للاثار الناتجة من التشعيع بالمصدر النيوتروني 241Am - 9Be على بعض كواشف الاثار النووي للحالة الصلبة Digital Processing and Analysis for the Tracks Produced From the Irradiation with Neutrons Source 241Am - 9Be on Some of Solid State Nuclear Track Detectors

اسم المؤلف: مصطفى يوسف رجب
اسم المشرف: حسين علي الجبوري
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Image processing technique was used in a lot of studies and research and it concluded , including a number of mathematical relations . In this study , two programs were used , the first one; MATLAB program and second Image - J program . These programs were used to tracks analysis of α - particles on the nuclear track detectors type CR - 39 and CN - 85 . Where irradiated detectors by thermal neutrons from (241Am - 9Be) source with activity 12Ci and neutron flux 105 n.cm - 2.s - 1 . Which obtained on incident α - particles for detectors through 10B(n, α)7Li interaction after covered it with boric acid H3Bo3 pellets . The irradiation times - TD for both detectors were 4h , 8h , 16h and 24h .Through the analyze irradiated detectors of using MATLAB outputs for found the following relationships : a)The irradiation time - TD has behavior linear relationships with following nuclear track parameters, Total track number - NT, Maximum track number - MRD (with depended on track diameter - DT at range of radiation response region 2.5μm - 4μm and 2.5μm - 5μm for CR - 39 and CN - 85 detector respectively) and Maximum track number - MD (without depending on track diameter - DT). b) The irradiation time - TD has behavior exponential relationship with maximum track number - MRA (with depended on track area - AT ) at range of radiation response region 7μm2 - 24μm2 and 9μm2 - 35μm2 for both CR - 39 and CN - 85 detector respectively. c) The irradiation time - TD has behavior a logarithmic relationship with maximum track number - MA (without depending on track area - AT).While through the analyze of outputs Image - J program for irradiated detectors found the irradiation time - TD has behavior linear relationships with following nuclear track detector parameters : a) Total track number - NT. b) Maximum track number - MRA (with depended on track area - AT ) at range of radiation response region 12 μm2 - 24μm2 and 5 μm2 - 27μm2 for both CR - 39 and CN - 85 detector respectively. c) Maximum track number - MA (without depending on track area - AT)This study show that MATLAB program was more analytical and accuracy from Image - J program , through the logarithmic behavior for both detectors between irradiation time - TD with the maximum track number - MA (without depending on track area - AT). There is the possibility of future use image analysis of MATLAB program in the other nuclear track parameters analysis , including ; etched velocity - Vt, , track diameter - Dt , critical angle of nuclear track - θt , nuclear track depth - Dp .The image analyze technique for nuclear track detector which obtained from this study especially with regard to track diameter - TD can be take into account for classification of α - particle emitters , In addition to introduce this technique in preparation of nano - filters and nono - membrane in nanotechnology fields

تحضير ودراسة المركبات SnxBa4Ca2Cux+4Oy وYnBa5Cun+5Oy Preparation and Characterization of the SnxBa4Ca2Cux+4Oy and YnBa5Cun+5Oy Compounds

اسم المؤلف: رؤى فخري هادي
اسم المشرف: عماد خضير الشكرجي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The present study includes the preparation of SnxBa4Ca2Cux+4Oy and YnBa5Cun+5Oy compounds with (x = 3, 4, 5, 6, 7) and (n=3, 5, 7) by solid state reaction (SSR) method. The study was to conclude the superconductor behavior of both compounds. The prepared samples were analyzed by Meissner effect primary, and the excess oxygen content was measured by using Iodomertric titration method. The samples characterized by XRD patterns with computer program that was used to determine the value of lattice constant, Scanning Electron Microscope (SEM), Energy dispersive X - ray spectroscopy (EDS) to study the grain morphology and also resistivity measurement was performed by Van der Pauw method to conclude the nature of behavior.The resistivity measurement results of Sn - Ba - Ca - Cu - O system showed that the semiconducting behavior, increases with decreasing the temperature toward low temperature, the lowest and the highest normal resistivity were found at x=6 and at x=4, respectively. The system Y - Ba - Cu - O showed a superconductor behavior with high transition temperature, the Tc at n=3 of about (113.6 K), the sample prepared with n=5 has Tc=113 K, meanwhile the sample prepared with n=7 has Tc=105 K.The x - ray analyses for SnxBa4Ca2Cux+4Oy samples showed that the tetragonal structure, and the c - parameter increased by increasing the value of (x) until reach to maximum value at x=5 then return back decreasing at x=6 and 7. The x - ray diffraction analysis of the compound YnBa5Cun+5Oy has orthorhombic phase and when Y - atom concentration and the number of CuO2 layer increased tend to increase b and c - axis.The Scanning Electron Microscopy (SEM) results showed that the appearance of nanostructure in Sn6Ba4Ca2Cu10O22 and Sn7Ba4Ca2Cu11O24 samples in the range (100 - 300 nm), whereas the other samples of Sn - familywas a microstructure. On the other hand, the Y - 358 had large grains randomly comparable with Y - 5 5 10, Y - 7 5 12 addition to absent the interfaces distances from Y - 358. The results of EDS showed that the agreement of the peaks appeared with the theoretical values.

تصنيع وتوصيف مفتاح بلازما الومضة الكاذبة ذو القدرة العالية Construction and Characterization of Pseudospark High Power Plasma Switch

اسم المؤلف: بسمة حسين حمد الشمري
اسم المشرف: احمد كمال احمد كمال حسين لطيف
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

محاكاة عامل تراكم الجرعة لاشعة كاما متضمنا تاثير اشعة الفناء للالمنيوم، والحديد والرصاص Simulation of Dose Buildup Factor of Gamma Ray Including Annihilation Radiation for Aluminum, Iron and Lead

اسم المؤلف: مروة صباح مهدي
اسم المشرف: لؤي ادور جورج ليث عبد العزيز العاني
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: A computer program based on Monte Carlo method had been designed and written in visual basic computer language and utilized for simulating the classic problem of gamma ray beam incident on finite plane slabs of absorbing materials. The source geometry adopted in this program is plane normal source.Dose buildup factor of gamma photons in the absence and presence pair production effect have been calculated in the energy range (4 - 10) MeV for aluminum, iron, and lead up to 5 mean free path thickness.Some of physical parameters has been studied and the simulation results indicates the following remarks : • Gamma ray buildup factor increases with the increase of the thickness for the three shielding materials, this increase in dose buildup factor is due to the increase of scattering with the small angles and with the increase of the thickness of the material.• Dose buildup factor for low atomic number material (Al, Z=13) is higher than that for medium (Fe, Z=26) and heavy (Pb, Z=82) material for the same photon energy (10MeV). A rapid decrease of the buildup factor values with the increase of Z is seen. This dependence is in a good agreement with the fact that the proportion of the cross section for Compton effect decreases with increasing atomic number, therefore the Compton effect plays a more significant role in lighter materials which have lower atomic number (Z).• Dose buildup factor is inversely proportional with the increase of energy within the studied enrgy range (4 - 10)MeV. This behavior can be explained that the cross section for Compton scattering within the studied energy range is decreased with increase ofenergy and this means that the probability of scattering is decreased and it is finally reflected on the buildup calculation, since the scattering plays an important role in determination of buildup factor.The rate of increase in the value of dose buildup factor in lead (Z = 82) higher than iron (Z = 26), and the last is more than that for aluminium (Z = 13). This is due to the effect of pair production interaction which is directly proportional with the square of atomic number.Dose buildup factor in the presence of pair production is higher than dose buildup factor in the absence of pair production effect. The deviation between the values of dose buildup factor in the presence and absence pair production is increased when the energy is increased within the studied energy; this mainly due to the increase of cross section for pair production values within the studied energy range.

دراسة الخصائص النووية التركبية والانتقالات الكهرومغناطيسية لانوية Kr ، Xe ، Nd ، Ge الزوجية - الزوجية باستخدام نموذج البوزونات المتفاعلة Study of Nuclear Structure Properties and Electromagnetic Transitions for even - even Kr , Xe , Nd , Ge Nuclei in the Framework of Interacting Boson Model

اسم المؤلف: عبد القادر سعد عبد القادر
اسم المشرف: سعد ناجي عبود
الموضوع العام: علوم الفيزياء
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: لقد تم في هذا البحث دراسة التركيب النووي والانتقالات الكهرومغناطيسية لبعض النظائر (الزوجية - الزوجية ) Nd , Xe , Kr وGe باستخدام النموذج الجماعي ( نموذج البوزونات المتفاعلة الثاني IBM - 2 ) . تم الحصول على نتائج لمستويات الطاقة، والانتقالات الكهربائية B(E2) , الانتقالات المغناطيسية B(M1) , ونسبة الخلط (E2/M1) ، وعزم رباعي القطب الكهربائي ، وعزم ثنائي القطب المغناطيسي ، والانتقالات احادية القطب . ولقد تم مقارنة النتائج مع القيم العملية المتوفرة وقد وجد انها متقاربة ومقبولة . ان نظائر ال Kr (Z=36 ) تقع في المنطقة الانتقالية القريبة من التحديد الاهتزازي. ولقد تم حساب مستويات الطاقة B(E2) ، B(M1) ، (E2/M1) وX(E0/E2) لبعض الانتقالات المختارة باستخدام نموذج البوزونات المتفاعلة الثاني (IBM - 2) وان جميع النتائج قد قورنت مع القيم العملية. لقد كان لمعاملات ماجيرونا اثرا كبيرا في حساب مستويات الطاقة , , , التي حددت انها تمتلك صفات تناظر مختلطة . لقد تم مقارنة نتائج نظائر Xe التي تم الحصول عليها من نموذج IBM - 2 مع التوقعات النظرية لتماثل النقطة الحرجةE(5) . وتبين ان 128Xe هو ليس نظير يقع ضمن E(5) كما اقترح مسبقا . لذا فان نسبة الطاقة لنظير ال Xe128 ( ) تقع بين E(5) وحدود - softγ . وبذلك فحسب هذه النسبة فان 128Xe يجب ان يقع بين E(5) وO(6). غالبا ما يكون اختبار 130Xe مناسب لنظائر Xe ، والذي يظهر خصائص E(5) بافضل حالته. كذلك فان مستويات الطاقة تعزز وجود هذا النظير ضمن E(5) . اما بالنسبة لنظائر 132Xe و134Xe فانها تظهر صفات مشابهة للمحدد الاهتزازي SU(5) . ان مستويات التناظر المختلطة قد تم التعريف عليها من نظائر Xe وهذا قد مكننا من تعقب تحرير فونون واحد لحالة في سلسلة النظائر ( الزوجية - الزوجية ) للزنون من الاهتزازات القريبة من N=82 الى نواة - softγ باتجاه منتصف القشرة . لقد درسنا الخصائص النووية لنظائرNd (A=144 - 154) في IBM - 2 وتم الحصول على نتائج جيدة مقارنة بالقيم العملية . 144 - 150Nd يقع في المنطقة الانتقالية ( الاهتزازي - الدوراني ) SU(5)→SU(3) .بينما نظائر 152 - 154Nd فانها تقع ضمن التحديد الدوراني (SU(3)) . ان X(5) سوف ياخذ مكان او حيز عندما يستمر بحركته بين تناظر U(5) الى تناظر ال SU(3) ويظهر ذلك بصورة واضحة ما بين مستويات الطاقة وقوى الانتقال رباعي القطب E2 . لقد وجد حديثا ان سلسلة نظائر Nd تشير الى الانتقالات الطورية كما ان نظير Nd150 يعرضا الخواص المتوقعة ل X(5) . على العموم فان هناك عدة دراسات مفصلة بحاجة للحصول على تلك المؤشرات . وبالنهاية نستنتج بان بعض نظائر Nd تكتشف خواص X(5) . ان , هي حالات تناظر مختلطة لنظائر Nd ان نموذج البوزونات المتفاعلة IBM - 2 كان ناجحا بوصفه للخواص التجميعية للنواة . وفي هذا البحث قد تم الاهتمام بالتطبيقات النظامية والمتضمنة اشكال البوزونات المختلطة.ان النظائر الجرمانيوم ( الزوجية - الزوجية ) لها اهتمام خاص بسبب وجودها ضمن مجموعتين من الحزم ذات الخواص المعقدة للنواة الخفيفة . ان نموذج البوزونات المتفاعلة IBM - 2 مع التركيبات المختلطة يجهز توصيف جيد لكلا الحالات المبينة بالمستوى الارضي وللبروتونات الموجودة بالمستوى المتهيج عبر غلاف القشرة Z =28 المغلق . لقد تم دراسة نظائر الجرمانيوم وتبين انه يتدرج مابين وسط قشرة البروتون والقشرة المزدوجة القريبة من المغلقة عند ال 82Ge . ولقد وجد ان نظائر الجرمانيوم عند التشكيل Nπ=2 تاخذ الشكل الاهتزازي وعند التشكيل Nπ= 4 تاخذ الشكل الدوراني ( ويزداد التشوه) . وفي هذا العمل استخدمت طرق حديثة جدا لتعيين الشحنات الفعلية (effective charge) للبوزونات وذلك باستخدام القيم العملية للانتقال رباعي القطب (0_1^+ 2_1^+ B(E2; وكذلك استخدمت طرق جديدة لحساب المعاملات الجيرو مغناطيسية للبوزونات gυ ، gπ وذلك بمعايرتها الى القيم العملية لـ B(M1) وδ (E2/M1) . | Nuclear structure Properties and electromagnetic transitions of some even - even Kr, Xe, Nd and Ge isotopes have been studied in this work, by using the collective Interacting Boson Model - 2 (IBM - 2). The Interacting Boson Model (IBM - 2) has been very successful in describing the collective properties of nuclei. This work concerns a systematic applications of the model, involving configuration mixing of bosons.There have been extensive IBM studies of low - lying positive parity bands, which are based on the ground state and the quadrupole degree of freedom. The results for energy levels, B(E2), B(M1), mixing ratios , quadrupole and magnetic dipole moments and monopole transitions, were compared with some previous experimental and theoretical values. It was found that an acceptable degree of agreement between the predictions of the IBM - 2 and the experiment can be achieved. The Kr isotope (Z = 36) lies in the transitional region closer to the vibrational range of nuclei. Energy , levels B(E2), B(M1) and the mixing ratios δ(E2/M1) and X(E0/E2) for selected transitions in this isotope were calculated in the framework of the interacting boson model (IBM - 2). All results were compared with experimental data. Some experimental X(E0/E2) ratios were calculated from available experimental data. Majorana parameters were found to have a great effect on the calculated energy levels of the , , and states which indicates they have mixed symmetry properties. The results of IBM - 2 for Xe isotopes were compared with the theoretical predictions assuming a critical point symmetry E(5) which leads to conclude that 128Xe is not an E(5) isotope as previously suggested. In this case of the 128Xe the observable is intermediate between the value for E(5) and gamma soft limit . The ratio suggests that 128Xe should lie between E(5) and O(6). Similar test using 130Xe as a most likely candidate amongst the Xe isotopes, conclusively demonstrate a how well E(5) is realized in the best case. The energy ratio confirmed that this isotope an E(5) critical point symmetry. The 132Xe and 134Xe show vibrational - like character (SU(5) limit). Mixed symmetry states are also studied. It is found that some of the mixed symmetry states with moderate high spins change very fast with respect to the Majorana interaction. Under certain conditions, they become the yrast state or yrare state. These states are difficult to decay and become very stable. This study suggests that a possible new mode of isomers may exist due to the special nature in their proton and neutron degrees of freedom for these isotopes. The mixed - symmetry states or at least a fragment of it have been identified in Xe isotopes. This enables us to trace the evolution of the one - phonon states in the even - even xenon isotopic chain from the vibrators near N = 82 to the γ - soft nuclei towards mid - shell. We have studied the nuclear properties of Neodymium isotopes with (A =144 - 154) in IBM - 2. A good agreement results with the experimental data. 144 - 150Nd lie in the transitional region (virational - rotational limit SU(5)→SU(3)). For the 152 - 154Nd isotopes the energy ratio are well described by the rotational limit SU(3). The X(5) symmetry would take place when moving continuously from the pure U(5) symmetry to the SU(3) symmetry and it implies a definite relations among the level energies and among the E2 transition strengths. It was recently shown that a signature of phase transition is observed in the chain of Nd isotopes, 150Nd display the predicted features of the X(5) symmetry and mark therefore the critical point. However, more detailed studies and experiments are needed to get ideas about this signature. At the end, we have concluded that some of Nd isotopes display X(5) symmetry features. The and are mixed symmetry states in Nd isotopes. The even - even isotopes of germanium are of special interest because of the coexistence of two sets of bands, of very different character, in the lighter nuclei. The IBM - 2 with configuration mixing provides a good description, both of states built on the normal ground state and of those associated with a proton pair excitation across the Z =28 closed - shell gap. Ge isotopes are studied, ranging from the middle of the neutron shell to very near the doubly closed shell at 82Ge. Same Hamiltonian is used for all the nuclei studied, with parameters which are constant or smoothly varying

تخمين معاملات زيوغ العدسه المغناطيسية باستخدام الحل التحليلي لمعاده المسار القريب من المحور Magnetic Lens Aberration Coefficients Estimation by Using the Analytical Solution for the Paraxial Ray Equation

اسم المؤلف: رشا يوسف حمد
اسم المشرف: عدي علي حسين خالد عباس يحيى
الموضوع العام: علوم الفيزياء
السنة: 2013
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: اجريت دراسة نظريه باستخدام الصيغه التحليلية لمعادله المسار شبه المحوري للالكترون وذلك لتحديد افضل الخواص البصريه للعدسة المغناطيسية. تم دراسهة معاملات الزيوغ كمعاملات الزيوغ الكروية, اللونيه, التشويه القطري واللولبي. اعتمد في هذا البحث انموذج الشكل الناقوسي لكلاسر لتمثيل توزيع المجال المحوري للعدسة المغناطيسية. وقد اخذ بنظر الاعتبار حالتين للزخم الابتدائي في الحسابات بوجوده او عدم وجوده في الحالتين. ان الوصول الى امثل النتائج قد انجز من خلال تغير بعض المعاملات المؤثرة مثل نصف العرض عند نصف الحد الاقصى(a= 2.01, 2.02, 2.03 and 2.04 mm), والحد الاعلى لكثافة الفيض المغناطيسي (Bm= 0.001, 0.002, 0.003 and 0.004 Tesla) وزاوية انبعاث الالكترون (0.2, 0.4, 0.5 and 0.6 rad= θ).من خلال النتائج تبين ان افضل قيم a تساوي 2.04 mm في حاله وجود او عدم وجود الزخم الابتدائي في الحسابات. وقد وجد ايضا ان كل من قيم الزيغ الكروي, اللوني والتشويه اللولبي يقل بزيادة a, بينما اقل قيم للزيغ الكروي والتشويه القطري في الحاله الاولى عندBm يساوي 0.004 Tesla.ووجد ايضا ان افضل الزوايا للالكترون (θ = 0.2 rad) وهي تتناسب طرديا مع معاملات الزيغ اللوني والتشويه اللولبي.ومن جهة اخرى تبين ان الزيغ الكروي والتشويه القطري له قيم سالبه وهذه المعاملات ممكن استخدامها كمصحح في المنظومات البصرية. | A theoretical investigation is carried out by using an analytical expression for paraxial trajectory of an electron in a magnetic lens to estimate the optimum properties of the magnetic lens. The aberration coefficients of the magnetic lens are studied, such as the spherical, chromatic, radial distortion and spiral distortion aberration coefficients. The Glaser's bell - shaped model is adopted to represent the axial field distribution of magnetic lens. The initial momentum of the electrons is taken into account, where the calculations are made for two cases : when the electrons have zero and non - zero initial momentum values . The optimization role is achieved by changes some of the effective parameters at the range of the half - width at half maximum (a = 2.01, 2.02, 2.03 and 2.04 mm), the maximum magnetic flux density (Bm = 0.001, 0.002, 0.003 and 0.004 Tesla) and the electron emission angle (θ = 0.2, 0.4, 0.5 and 0.6 rad). In the present results the optimum values for both cases of the initial momentum is found at the half - width at half maximum equal to 2.04 mm, and the values of the spherical, chromatic and spiral distortion aberration coefficients decreased as the half - width at half maximum (a) increased, while the minimum values of the spherical and radial distortion aberration coefficients are found at Bm = 0.004 Tesla in the first case. However the best angle is found at θ = 0.2 rad which is directly proportional which chromatic and spiral distortion aberration coefficients. On the other hand the calculations appeared that the negative values for both spherical and radial distortion aberration coefficients are estimated and these coefficients can be used as corrector in the optical systems.

محاكاة حاسوبية لجهاز صوتي بصري لنظام فوتوني COMPUTER SIMULATION OF AN ACOUSTO - OPTICAL DEVICE FOR PHOTONIC SYSTEM

اسم المؤلف: مروة كمال مصطفى
اسم المشرف: اياد عبد العزيز العاني احمد كمال احمد
الموضوع العام: علوم الفيزياء
السنة: 2008
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Acousto - optics science deals with the interaction between sound and light waves. Acousto - optic waves are most important in transferring signals through the communication systems, since modulating signals takes a great advantages in the field of communication engineering, bio - medical, laser beam deflection and laser intensity modulation.The aim of this work is to simulate the fundamentals of an Acousto - Optic Modulator. The simulation procedure is based on theoretical and computational relationships describing acousto - optic properties for three selected materials which are “Glass, Germanium, and Tellurium - Oxide”. Two computer programs have been written using “MATLAB” software, the first used to verify the normalized intensity of the diffracted orders versus peak phase delay using partial differential equation, while the second program is used to study the normalized intensity of the electric field versus time wave propagation and electro - magnetic wave propagation in x, y and z directions, using Finite Difference Time Domain. The results for Glass and Tellurium - Oxide materials shows that the periodic exchange of the normalized intensity between the zero and first orders becomes smaller as the interaction length D increase, this indicate that the higher orders may appear very clear in these materials. The results for the Glass material show that the normalized intensity of the electric field increases with increasing electromagnetic wave propagation in x, y and z directions.

ضغط الصوت باستخدام الكسوريات Fractal Audio Compression

اسم المؤلف: وسام فوزي جاسم محمد
اسم المشرف: لؤي ادور جورج ليث عبد العزيز العاني
الموضوع العام: علوم الفيزياء
السنة: 2005
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: لقد استحدثت طرق ضغط عديدة باستخدام تقنيات مختلفة الغرض منها تحقيق نسب ضغط عالية مع المحافظة على جودة الصوت المضغوط, مع الاخذ بنظر الاعتبار انجاز الضغط باقل وقت ممكن.طريقة الضغط الكسوري هي احدى هذه الطرق التي يرافقها ضياع بالبيانات وتعتبر من طرق الضغط الحديثة وتعتمد على عملية ايجاد مجاميع محددة وصغيرة من المعادلات الرياضية التي تصف الاشارة . بارسال معاملات هذه المعادلات الى محلل الشفرة يمكن اعادة تشكيل الاشارة الاصلية.بايجاز ضغط الصوت الكسوري يعتمد على مبدا نظام التكرار المجزئPIFS) ). ضغط الصوت الكسوري يستغل ال(Affine redundancy) والتي تتواجد في الصوت, هذه ال (redundancy) ترتبط بالتشابه الذاتي للصوت.بكلمة اخرى ضغط الصوت الكسوري يقوم بايجادالا نماط المتشابهة والتي تتواجد بقياسات مختلفة(different scales) واماكن مختلفة(different places) في الصوت, وبعد ذللك يقوم بحذف اكثر ما يمكن من ال(redundancy).هذا البحث يهدف الى محاولة التحقق من امكانية تطبيق الضغط الكسوري في عملية ضغط الصوت. النظام المعتمد يتكون من مرحلتين : المرحلة الاولى مرحلة التشفير(Encoding Unit) والثانية مرحلة فك التشفير ) .(Decoding Unitفي مرحلة التشفير يجزا الصوت الاصلي الى نوعين من الكتل, كتل تدعى كتل المجال المقابل ((Range Pool وهي كتل غير متداخلة, وكتل تدعى كتل المجال (Domain Pool) والتي من الممكن ان تكون متداخلة. ومن ثم يتم تقطيع الصوت باستخدام طريقة التقطيع المتساوي للكتل الى كتل متساوية الحجم. بعد ذلك يتم ايجاد افضل كتل في المجال لكل كتلة في المجال المقابل وذلك بتطبيق احد انواع التحويلات وتدعى((Affine Transformation .تنتهي مرحلة التشفير بخزن تفاصيل (معاملات )هذه التحويلات لكل كتلة من كتل المجال المقابل .ان عملية ايجاد الكتل المتشابهة تتطلب عمليات حسابية معقدة تستغرق وقت طويل وهذا ما يؤخذ على طريقة الضغط الكسوري كنقطة ضعف.ان البرامجيات التي تم بناؤها لهذا الغرض تم اختبارها باستخدام خمسة نماذج لبيانات صوتية. لقد تم تنفيذ النظام المعتمد باستخدام فيجوال بيسك6.0 كلغة برمجة, تم استخدام معدل الخطا التربيعي((MSE ونسبة الاشارة الى التشويش((PSNR كمعاملات حساب دقة النتائج المستخلصة من التقنية الكلية في النظام المعتمد.و كانت بعض النتائج المستخلصة من البحث هي بالنسبة للعينة الاولى في حالة حجم الكتلة تساوي (60 ) فان نسبة الضغط (15.51 : 1), اما العينة الثانية في حالة حجم الكتلة تساوي (40) فان نسبة الضغط (11.51 : 1), وفي حالة حجم كتلة صغيرة كما في العينة الثالثة والتي تساوي (20) فان قيمة ال(PSNR) جيدة وتساوي (35.76 dB), وكذالك للعينة الاولى في حالة حجم الكتلة تساوي (10) فان قيمة ال(PSNR) تساوي (45.63 dB). | Fractal audio compression is based on the concept of a partitioned iterated function system (PIFS). Fractal audio compression exploits the affine redundancy that is commonly present in audio; this redundancy is related to the similarity of an audio with itself. In other words, fractal audio compression finds similar patterns that exist in different scales and different places in audio, and then eliminates as much redundancy as possible. In this work the possibility of implementing fractal audio compression is investigated. The implemented system consists of two major units; the first is the Encoding unit and the second is the Decoding unit. Encoding is done by partitioning the range pool (which is the original audio) into non - overlapping blocks, called range blocks, and partitioning the domain pool (which is the result of the original audio after down sampling) into overlapped blocks with the same size of range blocks called domain blocks. A fixed size - partitioning scheme is used to partition the domain pool and the range pool. After generating the range and domain pools, for every range block, the best - matching domain block in the domain pool is searched for by performing a set of affine transformations on them. Thus the encoding is completed by saving the optimal affine parameters for every range block. The Decoding process can be done by repeatedly applying the affine transformation on an initially blank audio and its subsequent reconstructed audio, until it completely reconstruct an approximate wave to the original audio. The time required to compress an audio file is affected by the size of each block being extracted from the proceed audio file; this means smaller block size implies longer time required to compress the corresponding audio file.The implemented system was tested using five wave samples of data. The proposed work was implemented by using Visual Basic (6.0) as a programming language, the fidelity measure MSE and PSNR were used to check the results of the whole implemented technique. The best results obtained from the implemented system were for the test (sample - 1) in case were block size equal to (60) the compression ratio is (15.51 : 1), also for test (sample - 2) were block size equal to (40) the compression ratio is (11.03 : 1), and for small block size as in test (sample - 3) were the block size is (20) the value of the PSNR is good that its equal to (35.76 dB), also for test sample - 1 when the block size is (10) the PSNR value (45.63 dB).

معالجة رياضية لدراسة تغير التركيب المسامي مع ظروف التشكيل للمواد المسامية Mathematical Manipulation to Study the Changes of Porous Structure with the Formation Conditions of Porous Materials

اسم المؤلف: سديم عباس فاضل القصاب
الموضوع العام: علوم الفيزياء
السنة: 2005
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم تطوير نموذج مجسم يصف عملية االتكثيف خلال عملية الحرق الزجاجي (التزجيج) لمادة تحتوي على محتويات صلبة. هذا النموذج تم تطويرة من نموذج سابق للباحث Scherer والذي وضع نموذج يصف عملية التكثيف خلال عملية الحرق لمادة لا تحتوي على محتويات صلبة.النموذج المطور استخدم لمحاكاة معدل التكثيف خلال عملية الحرق لمواد سيراميكية غير متجانسة تتكون من خليط من بعض الاطيان العراقية والتي تم تحضيرها من بحث سابق. النموذج المطور تم استخدامة لدراسة تاثير عدة عوامل على عملية التكثيف خلال عملية الحرق وهي درجة حرارة الحرق، زمن الحرق والنسبة بين حجم المواد الصلبة الى حجم السائل الزجاجي، كما استخدم النموذج المطور في تقدير قيم اللزوجة الفعالة للسائل الزجاجي المتكون خلال عملية الحرق. كذلك تم تطبيق نموذجان اخران للمواد غير المتجانسة هما نموذج الكرة المركبة ونموذج المكون الذاتي وجرى استخدامهما لدراسة تاثير درجة حرارة الحرق وزمن الحرق على عملية االتكثيف لغرض مقارنة النتائج من هذين النموذجين مع نتائج النموذج المطور. كذلك تم استخدام النموذج المطور لدراسة تاثيرتوزيع حجوم المسامات على عملية التكثيف وذلك بفرض توزيع كاوس لحجوم المسامات واعادة صياغة المعادلات للموديل المطور لجعلها تعتمد على الانحراف المعياري لتوزيع حجوم المسامات. العوامل الفيزيائية مثل اللزوجة تم حسابها من خلال عملية المطابقة (fitting ( للنتائج العملية لعملية الحرق للنماذج. تم تصميم برامج حاسوبية بلغة ( (FORTRAN 90لدراسة تاثير درجة حرارة الحرق على عملية االتكثيف باستخدام النموذج المطور، نموذج الكرة المركبة ونموذج المكون الذاتي. هذة البرامج تم تحويرها فيما بعد لمحاكاة عملية االتكثيف كدالة لزمن الحرق. كذلك برنامج اخر تم تصميمة لدراسة تاثيرتوزيع حجوم المسامات على عملية التكثيف خلال عملية الحرق باستخدام النموذج المطور. النتائج من برنامج الموديل المطور تحقق افضل مقاربة للنتائج العملية تليها النتائج من برنامج موديل الكرة المركبة. النتائج من برنامج تاثيردرجة حرارة الحرق تشير عموما" الى زيادة معدل االتكثيف مع زيادة درجة حرارة الحرق، رغم ذلك، عندما تكون نسبة المواد الصلبة عالية نسبيا" فاءن اللزوجة تزداد عند الدرجات الحرارية العالية (حوالي 1400سo ) يعزى ذلك الى عملية نمو بلوري محتملة، وعلية يؤدي ذلك الى نقصان معدل االتكثيف. النتائج من برنامج تاثير زمن الحرق تشيرالى ان النموذج المطوريتنبا بزيادة شبة لوغارتمية للكثافة النسبية مع الزمن، بينما يتنبا النموذجان الاخران ( نموذج الكرة المركبة ونموذج المكون الذاتي) بزيادة اسية للكثافة النسبية مع الزمن. النتائج من البحوث السابقة تتفق مع توقع النموذج المطور. النتائج من برنامج تاثيرتوزيع حجوم المسامات على عملية التكثيف تدل على ان هذا العامل لة تاثير قوي عندما يكون التوزيع عريضا" فقط على المراحل النهائية لعملية التكثيف لان المسامات الكبيرة غلقها بطىء نسبيا". | A mathematical model describing the densification process during viscous sintering process of a material contains solid inclusions is developed (modified) from a Scherer model which describes the rate of densification during sintering for a free solid inclusions material. The modified model is used to simulate the rate of densification during sintering process for ceramic heterogeneous materials consist from mixtures of some Iraqi clays that had been prepared in a previous work. In addition the modified model is used to study the effect of several factors on densification during sintering process and used in predicting the effective viscosity of the viscous phase that formed during sintering. The factors are the sintering temperature, sintering time, and the ratio of solid inclusions volume to viscous phase volume.Another two heterogeneous models which are the composite sphere and the self consistent models are also applied and used to study the effect of sintering temperature and sintering time on densification during sintering for comparison with the present developed model.The modified model is also used to study the effect of pore size distribution on densification process by assuming a Gaussian distribution for the pore sizes and reformulating the equations of the modified model to make them depend on the standard deviation of pore size distribution.The physical parameters like viscosity are computed from the fitting process of the practical data of the samples.Computer programs in FORTRAN 90 language are designed to study the effect of sintering temperature on densification process using the developed model, the composite sphere and the self consistent models. These programs are modified to simulate the densification process versus time duration of the sintering process. Another program is designed to study the effect of pore size distribution on sintering process using the developed model. The results from the developed (modified) Scherer model are better fit the practical data, then the composite sphere model. The results from the program of the effect of sintering temperature indicates in general that the rate of densification is increased with increasing sintering temperature, this is due to the decrease in the viscosity with temperature increasing. However, when the ratio of the solid inclusions is high the viscosity is increased at relatively high sintering temperatures (about 1400oC) this increase in viscosity may be due to induced crystallization processes, accordingly the rate of densification is decreased at these circumstances.The results from the program of the effect of sintering time indicate that the modified model predicts that the increase in density is semi logarithmic with time, while the other two models predict an exponential increase with time. The results from the program of the effect of pore size distribution indicate that this parameter has a strong effect if the distribution is broad only in the last stages of densification because the largest pores are relatively slow to close

دراسة تاثير المحاليل الالكتروليتيه على خواص العزليه الكهربائية للبورسلين المشكل من مواد محليه A STUDY OF THE EFFECT OF ELECTROLYTE SOLUTION ON THE PROPERTIES OF ELECTRICAL INSULATOR PORCELAIN FORMED USING LOCAL MATERIAL

اسم المؤلف: عتاب فاضل حسين
اسم المشرف: فاضل عبد رسن ازهار جواد داوود
الموضوع العام: علوم الفيزياء
السنة: 2005
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يهدف البحث الى دراسه تاثير المحلول الالكتروليتي ونسب تركيزه على الخواص الكهربائية والفيزيائية لجسم البورسليني الذي تم تحضيره باستخدام مواد محليه عراقيه. تم تشكيل الجسم بور سليني من كاؤلين دويخله،رمل زجاج ارضمه، فلدسبار وبنسب وزنيه (45 %, 30% , 25%) على التوالي. ولقد اجريت معامله كيميائية لكل من الكاؤلين والسليكا بهدف تنقيتها من الشوائب التي يمكن ان تذوب بحامض الهيدروكلوريك حيث تمت دراسة التغيرات الحاصلة من خلال تحاليل . IR قسمت الدراسة الى سبعه مجاميع محضره من هذه المواد طبقا لنسب المضافة من المحلول الالكتروليتي المحضر من (NaCO3+NaSiO3) وبنسبه (2 : 1) ان نسب اضافات المحلول الالكتروليتي هي 0.7%,1%) ,0.5% 0.2% , 0.1%) حيث ثبت نوع ونسبه الماده المعدنه في تشكيل الجسم البورسليني وهي او كسيد الزنكZnO وبنسبه (.(2% تم تشكيل مكبوسات من هذه الخلطات وبعد التجفيف تم حرقها لدرجات حرارة مختلفة1350oC) (1250, 1300 اجريت القياسات العزليه الكهربائية (ثابت العزل ومعامل الفقدان العزلي) وكذلك التوصليه الحرارية وقابليه الانضغاط. ان النتائج المتحققة لنماذج المحروقه بدرجه 1350oC ا بد ت نمط من ثبوت قيم العزليه الكهربائيه عند حدود معينه من تراكيز المحلول الالكتروليتي المضاف لمكونات الجسم البورسليني ضمن مدى((0.2 - 0.1% , في حين هنالك تغير في قيم التوصليه الحراريه ضمن مدى (0.2 - 0.5%) من تركيز المحلول الالكتروليتي. وان قابليه الانضغاط تكون عاليه عند حدود (0.5%) من تركيز المحلول الالكتروليتي لنفس المكونات،وبالتالي يتطلب اعتماد مفاضلة في الخواص وحدودها لاختيار افضل تركيز المحلول الالكتروليتي بما يوفر توافق نتائج الخواص العملية مع الخواص الصناعية القياسية المتحققة على منتجات محضره من مواد بلدان اخرى ومعتمدة لديهم ، لقد تم اعتبار ان افضل تركيز يتوافق مع الخواص العزليه الكهربائية وكذلك التوصليه الحرارية والميكانيكية هو (0.2%) كما اشاره اليه النتائج. | This study was carried out to prepare a porcelain samples, which can be used as an electrical insulator. The raw materials used for the preparation are kaolin Duakhla, Arudhma Sand glass and Potash feldspar with weight percentage (45%, 30%, 25%) respectively. A chemical treatment was performed on kaolin Duakhla, Arudhma Sand glass to remove all the impurities. The effect of the washing by HCl acid (chemical treatment) was examined by IR Tech. The study divided into seven groups. Relating to the concentration of electrolyte solution which is consisting of (NaCO3 & NaSiO3) as a ratio (2 : 1), and for fixed percentage of mineralizer (2%ZnO). The concentrations of electrolyte which were added to these groups are (1%, 0.7%, 0.5%, 0.2%, and 0.1%). Samples of each group have been prepared, and then each sample was pressed, then after that these samples are dried and sintered for different temperatures (1250, 1300, 1350 oC). Dielectric measurement (Dielectric Constant& Dielectric loss index) were carried out for these pressed samples, also Physical properties “Thermal conductivity” and mechanical properties “Compression strength” were measured for these samples. The results of these measurements for samples sintered at 1350oC are found to have a stable change at the range (0.1 - 0.2%) of concentration of electrolyte solution. While there is a change in the results of thermal conductivity in the concentration range (0.2 - 0.5%) of electrolyte solution. And the values of compression strength is found to be high at 0.5% concentration of electrolyte solution. Therefore we should select the best concentration of electrolyte solution, to get the optimum properties which would agree with practical results and the standard properties for the attentive in other countries of the world. Then, can regarde the (0.2%) concentration of electrolyte solution is the optimum value that can be used in the industry of the electrical insulators

دراسة النشاط الاشعاعي الطبيعي للمخلفات النفطية A study of the natural radioactivity of thepetroleum waste

اسم المؤلف: عصام محمد رشيد درويش
اسم المشرف: ندى فاضل توفيق كريم خلف محمد
الموضوع العام: علوم الفيزياء
السنة: 2010
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The aim of this study is to detect the radioactivity of radionuclides and measure the specific activities and the uranium concentration in (30) samples of crude oil and oil waste were brought from three oil locations Dora refinery, Bijie refinery, and north field of al - Rumaila. The measurements in this study were done by using two techniques : 1 - Gamma rays spectroscopy system was used to measure the specific activity for radionuclides. This system is consist of high purity of germanium detector (HPGe) with personal computer as multi channel analyzer (MCA) that computerized to plot the radioactive spectrum and compute the specific activities of the radionuclides. There are seven radionuclides are detected : (Bi - 214, Ra - 226, TI - 208, Bi - 212, Pb - 212, K - 40, and Cs - 137), these radionuclides included; two radionuclides (Bi - 214,Ra - 226) belong to the U - 238 series, three radionuclides (TI - 208, Bi - 212, Pb - 212) belong to Th - 232series, one natural radionuclide (K - 40), and one artificial radionuclide (Cs - 137).For Dora refinery samples, the averages of specific activities of (Bi - 214, Ra - 226) were (7.79, 16.08) Bq/kg respectively, the averages of specific activities of (TI - 208, Bi - 212, Pb - 212) were (7.95,4.05,5.75) Bq/kg , the average of specific activities of (Cs - 137) was (0.64) Bq/kg , the average of specific activities of (K - 40) was (99.3) Bq/kg. For Bijie refinery samples, the average of specific activities of (Bi - 214)was (0.39) Bq/kg, the averages specific activities of (Bi - 212, Pb - 212)were (0.02,0.01) Bq/kg, the average of specific activities of (K - 40) was(2.28) Bq/kg , and three radionuclides (Ra - 226, TI - 208, and Cs - 137) werenot appeared in Bijie samples.2 - solid state nuclear track detectors technique (SSNTDs), the uraniumconcentration determined by using CR - 39 track detector and fissionfragment track technique, the nuclear reaction used as source of uraniumfission fragment is U - 235 (n - f) obtained by the bombardment of U - 235with thermal neutrons emitted from (Am - Be) neutron source with flux(5000 n/cm2.s) for seven days, the concentration were calculated bycomparison with the standard samples.The uranium concentration in Dora refinery samples were rangedbetween (0.95 - 3.34) ppm with average (2.03) ppm for solid samples and(1.25) ppm for liquid samples.The uranium concentration in Bijie refinery samples were ranged from(0.42 - 1.46) ppm with average (0.55) ppm in the solid samples and (1.24) ppm in the liquid samples.The uranium concentration in the north field of al - Rumaila samples were ranged between (1.78 - 6.35) ppm with average (3.37) ppm.From above results, we concluded that the maximum of uranium concentration was found in the north field of al - Rumaila in Basrah governorate, these results are agreement with the permissible limit from IAEA. The maximum of external equivalent dose rate from NORM in oil waste was found in the north field of al - Rumaila was (0.30) mSv/y less than the permissible limit from IAEA which is (1) mSv/y for the public.

حسابات عن الخواص البصريه لعدسه رباعيه الاقطاب كهروسكونيه ثلاثيه COMPUTATIONS ON THE OPTICAL PROPERTIES OF A TRIPLET ELECTROSTATIC QUADRUPOLE LENS

اسم المؤلف: اسراء لطيف محمد العميري
الموضوع العام: علوم الفيزياء
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: استعانه بطريقة المصفوفات الانتقاليه والحاسوب الشخصي فقد اجري بحث حاسوبي عن خواص نموذج مستطيلي يمثل المجال المحوري لعدسه ثلاثية كهروسكونيه رباعية الاقطاب، ان مسار حزمة الجسيمات المشحونه الماره خلال المجالات المستطيلية قد تم ايجاده بحل معادلة مسار الحركه بالاحداثيات الكارتيزيه اذ كتب برنامج حاسوبي لهذا الغرض. لقد حسبت الخواص البصريه للعدسة الثلاثية الكهروسكونيه بالاستعانه بمسار الحزمه على امتداد محور العدسه. وكتبت برامج حاسوبيه بفورتران ٧٧ لايجاد مختلف الخواص البصريه. وتم تركيز الحسابات على ايجاد الابعاد البؤرية ومعاملات الزيوغ الكروية في كلا المستويين الافقي والعمودي للمسار على امتداد المحور البصري. وقد اظهرت النتائج ان اختيار المعلمات الهندسية والتشغيلية يعتمد على وظيفة العدسه الثلاثية الكهروسكونية الرباعية الاقطاب في منظومة بصريه الكترونيه او ايونيه معينة.

دراسة الخواص الحراريه للاغشيه الرقيقه الذكيه نوع نيكل - تيتانيوم Study of Thermal Properties of NiTi Thin Film Shape Memory Alloy

اسم المؤلف: هديل ثامر خضير
اسم المشرف: عماد خضير الشكرجي
الموضوع العام: علوم الفيزياء
السنة: 2008
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: سبائك ذاكرة الشكل (SMA) shape memory alloyاو ما يسمى بالمواد الذكيه هي نوع من السبائك المعدنيه التي تعاني تحولات طور من الاوستنايت الى المارتنسايت عند تعرضها الى حراره او اجهاد كافي للتحول ولها القدره على الرجوع الى نفس حالة الشبيكه قبل التحول عند زوال المؤثر .لقد تم التركيز في هذه الدراسه على الخواص الحراريه كمحاوله لفهم التصرف الذي يحدث في الغشاء الرقيق والذي يتمثل بكسر شريحة الفلم عند تسليط قيمه معينه من الفولطيه والتيار وعند قيمه معينه من حرارة الاساس . وقد اخترنا دراسة غشاء NiTi لان له دور مهم في التطبيقات الطبيه والصناعيه .لقد تم حساب التوصيل الحراري والسعه الحراريه لغشاء NiTi نظـريا وكذلك تم حساب التوصيل الحراري والسعه الحراريه للزجاج المستخدم كاساس للغشاء عمليا وبعدها تمت مقارنة نتاءج هذه الحسابات للغشاء والزجاج وتفسير سبب الكسر في شريحة الغشاء والذي تبين انه يحدث في الزجاج نتيجة للفرق الكبير في الخواص الحراريه بين الغشاء والزجاج وهذا بسبب عدم تحمل الزجاج للطاقه الحراريه العاليه الناتجه خلال عملية تحول الطور بين الاوستنايت والمارتنسايت في الغشاء الرقيق والتي تسلط على الشريحة الزجاجيه للغشاء. | Shape memory alloys (SMA) or intelligent material, which are also called smart material, are a group of metallic alloys that undergo phase transformation from Austenite to Martensite when heated or subjected to appropriate stresses. After cooling or removing the stress, they have the ability to remember their previous structure and return to it.The concern of this study is on the thermal properties of NiTi thin film and its substrate as an attempt to understand the behavior occurring in the thin film slide represented by breaking it at certain values of voltage, current and substrate temperature (Ts). We have selected NiTi alloy because of its important medical and industrial applications. Thermal conductivity and heat capacity of NiTi thin film have been calculated theoretically and the thermal conductivity and heat capacity of glass substrate are measured experimentally. The cause of breaking in the thin film slide is the result of large difference in the thermal properties represented by thermal conductivity and heat capacity between the NiTi thin film and glass substrate. This is because the glass can not bear the high amount of heating energy resulting during the phase transformation process between Austenite and Martensite which exerts on the thin film slide

دراسة نظرية لطاقة الترابط لذرة الليثيوم

اسم المؤلف: محمد عبد الحسين حسوني وادي الكعبي
الموضوع العام: علوم الفيزياء
السنة: 2004
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: كربلاء
الصفحات الاولى:

تحديد النشاط الاشعاعي للنظائر المشعة 137Cs,134Cs,I131,40Kفي الاغذية المستهلكة في مدينة البصرة جنوب العراق Radiation activity determination of 137Cs,134Cs,I131,40K and in food consumed in Basrah South of Iraq

اسم المؤلف: مروة جواد كاظم راضي
اسم المشرف: عبد المنعم خليل الكامل علي عبد عباس الربيعة
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: SAM 940TM detector has been used to detect and identify the radioactive isotopes (Radio - Isotope Identification (RIID)) at low levels of gamma rays emitted from food materials.Six samples of fresh milk have been pick out for six locations in Basrah. Ten samples of imported milk powder have been taken into account. Ten samples of lentils, rice, coffee and tea have been taken into account.Eight samples of mineral water, one of distilled water and one sample of piped water; the last one has been picked out from the net distributed water at physics department building in college of science university of Basrah.The results of our study show that, the annual effective dose for the radioactive potassium ????40 in food materials of the highest value. For local fresh milk is (0.216,0.529)mSv/y for adults and children respectively. It is of these samples have been taken from Zubair city, and its less value is (0.076,0.186)mSv/y for adults and children respectively. These samples have been taken from Abuo Al Kasseb. As for the imported milk powder, the highest value is (0.556,1.349) mSv/y for adults and children respectively. The sample is related to Al - munash milk from New Zealand, and less value is (0.272,0.660)mSv/y for adults and children respectively. The sample is related to modhash imported milk powder from Oman.For rice, the highest value is (0.303,0.636) mSv/y for adults and children respectively. The sample is related to Mahmood rice from India, and less value is (0.149, 0.313) mSv/y for adults and children respectively. That is for Galaxy rice imported from India.As for lentils, the highest value is (0.029 ,0.061) mSv/y for adults and children respectively. The sample is related to Wade al akdar lentils from Syria, and its less value is (0.020,0.042)mSv/y for adults and children respectively for Urbak lentils imported from Tukey. For water, the highest value is (0.189, 0.398) mSv/y for adults and children respectively for distilled water and Janaan drinking water from Baghdad. Its less valueis (0.183, 0.385)mSv/y for adults and children respectively for Aquafina drinking water imported from Kuwait.For coffee, the highest value is (0.041) mSv/y for adults for two samples from Brazil and one sample from Spain and other produce from Poland. Its less value is (0.019)mSv/y from European Union production. For tea, the highest value is (0.019, 0.039) mSv/y for adults and children respectively for Jant almunaash and Gazalian samples tea, its less value is (0.008,0.015)mSv/y for adults and children respectively for Alwaza, Mahmood and Baiet alteb samples tea imported from Sri Lanka.The annual effective dose of Iodine ????131 , Cesium ????????134 and Cesium ????????137 in lentils, rice, coffee, tea, mineral water, distilled water and piped water have been carried out and the results are listed in thesis.

درجة الحرارة المميزة وطاقة الاثارة الدنيا لليزر النقطة الكمية الشبه الموصل Characteristic Temperature and Lowest Excitation Energy of Semiconductor QD laser

اسم المؤلف: غيث منور علي
اسم المشرف: رائد محمد حسن
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: In this work, we have studied important theoretical relationships in Semiconductor Quantum Dot Laser (QDL) Characteristics.The study is based on theoretical model equations that are derived from the rate equations. The equations were applied on experimental parameters of continuous - wave QDL GaInP/InP at 1.55μm wavelength to get theoretical simulation of the characteristics of this laser type.We also studied the temperature effect on the internal losses and the impact of these losses in determining the characteristics of the temperature of QD. The results were presented within two cases; the first is when there are no internal absorption losses and the second where there is no existence of these losses. Also, we studied the effect of ambient temperature on the characteristics of temperature for each of QD and OCL.The lowest excitation energy of QD has been studied in two control cases : with surface density of QD and with cross - section of internal losses.Throughout changing many systems and control parameters, the effects of these parameters have been studied according to the different kinds of relationships. In this research, we have studied the parameters : Surface density of QD, mean size of QD, optical confinement layer, radiative constant for OCL material, spontaneous radiative recombination time, root mean square of QD size fluctuations, cavity length and mirrors reflectivity.Some of the results in this work were compared with other experimental results of other researchers who applied the QDL model and showed a good matching.

التقنين الاشعاعي البيئي للمياه الجوفية في غرب محافظة البصرة باستخدام تقنية التالق الحراري Environmental Radiation Dosimetry of Groundwater in West of Basra Governorate using Thermoluminescence Technique

اسم المؤلف: سيف قاسم هلال
اسم المشرف: رياض جاسب ابو الهيل
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
الجامعة: جامعة البصرة
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: This study includes calculation the dose rate of emitted gamma - rays from groundwater taken from different locations in the Basra govemorate by use of thermoluminescence technique . it emphasis on the the characteristics of TL - reader ,TL - dosimeter (calcium fluoride) to know the suitability of these systems for environmental monitoring. It is found that the zero dose reading for calcium fluoride is 0.18 m rad .It is also found that most dosimeters of the same materials have nearly equal sensitivities and that all thebatches have high uniformity which makes them capable for environmental use. Experimental observations have indicated that there is linear relation between response and dose for the material which qualifies it for measuring doses within the low dose range. The variations in the response of the TL - reader using internal light source have also been investigated ,it is found that TL - reader has high stability .The fading in a environmental field for calcium fluoride is 7% in one month.Making sure that these systems are suitable for environmental monitoring programing ,calcium fluoride has been used for measuring gamma - rays emitting from natural background radiation ,it is foundthat the natural dose rate of gamma - rays emitted from the locations : Albrjisiya, khor aizubair, Safwan, Jabal Sanam, Um Qasr, Um Eanij and Al - lahees are (5.80,6.41, 5.32, 5.25,5.26,4.60 and 4.86) μrad/h receptivity . Thus, the dose rate of radiation emitted From ground water of province of Basra is 5.35 μ rad/h . the results proved that the inhabited area ling within the environmental monitoring satiations are the area in which the radiation is natural and that the rate that the human being exposed equal 11.5μrad/h which considered naturalexposure limit.

تحضير وتشخيص بعض البلورات السائلة وخلائطها الثنائية البلورية السائلة ودراسة بعض خواصها الفيزيائية Preparation & Characterization of some liquid crystals and Binary liquid crystalline mixtures and study some of their physical properties

اسم المؤلف: زينب نديم مطشر
اسم المشرف: اياد جاسم الحجاج
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: study included as a first step the preparation of compound 4 - heptyloxy benzaldehyde and derivatives by linking alkoxy series with the aldehyde, and in the second step was to prepare Schiff base compounds through interaction of equal moles of the compound 4 - heptyloxy benzaldehyde with some primary amines with different polar groups, and in the third stage was to prepare mixtures from the Schiff base compounds resulting from the second step,and we obtained five liquid crystalline mixtures at low temperatures and some of them close to room temperature, and then the chemical structures was chacterized and the absorption bands for functional groups was given by FTIR spectroscopy scan . A microscope with polarized light (POM) and a differential scaning calorimeter (DSC) was also used to study the liquid crystalline phases for individual compounds, as well as binary liquid crystalline mixtures and then a discussion of changes taking place at phase transition temperatures for individual liquid crystalline compounds as well as their binary mixtures , as characterized by these mixtures it owns a wide range of temperatures and some are close to room temperature ranging between (22.1 - 53.1 ℃). we has been studying some of the physical properties of these mixtures and compare them with the pure liquid crystals to see what has been achieved to improve these properties by studying the electrical properties (conductivity and dielectric ), as well as the activation energy , we has also been studying the photoelectric effect and determine the threshold voltage in the cases of parallel and vertical alignments , and the study shown a variation in the dielectric behaviour of binary liquid crystalline mixtures of remarkable increase compared to individual liquid crystalline compounds either the positive or negative dielectricanisotropy , ranging from ( - 1.320 - 2.234), while the variation in the electrical conductivity of binary mixtures of liquid crystal range (0.138 - 0.351 (ohm.m) - 1, and finally studied photoelectric effects for individual liquid crystalline compounds, as well as binary liquid crystal mixtures show that liquid crystalline mixtures have seen a clear decline in the threshold voltages (1.3 - 3.9Volt

دراسة نظرية لانتشار نبضة كاوسية في الياف البلورة الفوتونية والعوامل المؤثرة فيها Theoretical Study of the Propagation Gaussain Pulse in Photonic Crystal Fibers and the Parameters Influencing it

اسم المؤلف: دعاء حسين هاشم
اسم المشرف: حسن عبد الله سلطان
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
الجامعة: جامعة البصرة
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: In this thesis the propagation of short Gaussian pulse in Photonic Crystal Fibers (PCFs) are studied, the effect of the fiber parameters on the pulse like the absorption, dispersion and nonlinearity studied also.Nonlinear Schrodinger Equation (NLSE) was solved numerically using the spectral or Split - Step Fourier Method (SSFM) to determine the pulse spatio - temporal evolution.The study includes the effect of the photonic crystal arrangement especially the holes number, hole - hole spacing and holes dimeter on the effective refractive index and the dispersion of the photonic crystal fiber.The Nonlinear Schrodinger Equation (NLSE) was solved using the Finite differences in the frequency domain (FDFD) method.The two zeros dispersion were studied to calculate the zero dispersion wavelength (ZDW) by applying the international golden ratio (1.16180339887) for the ratio of the hole - hole spacing to the holes dimeters.The study shows that the pulse propagation depends strongly on the absorption, dispersion and nonlinearity of the PCF, and the pulse wavelength must be near the ZDW to ensure the propagation with little loses.The dependence of the nonlinear refractive index, the dispersion and the ZDW of the PCF were proved.The study shows that the golden ratio can be used to have two ZDWs, and a new ratio of hole - hole spacing to the hole dimeter equal to 2 can be used to achieve two ZDWs.

حساب كثافة الحاملات في طبقة الحصر البصري واشغال الحاملات المحصورة في منظومة ليزر النقطة الكمية نوع GaInAsP/InP Calculating the Carrier Density in OCL and Confined Carrier Occupation in Quantum Dot Laser System Type GaInAsP/InP

اسم المؤلف: ایمان ذیاب شرشاب
اسم المشرف: رائد محمد حسن
الموضوع العام: علوم الفيزياء
السنة: 2017
الدرجة: ماجستير
الجامعة: جامعة البصرة
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: In this work, we have studied many control parameters effect which plays an important role to determine the density concentration of carriers in the Quantum Dot Laser (QDL) system. Our study is based on theoretical model equations which derived from the rate equations. The equations were applied to the GaInAsP/InP QDL with wavelength 1.55μm. We produce a theoretical simulation and analytical solution of the equations by a Mathematical program.Theoretical equations are used to study the effect the parameters by controlling the value of each : the carrier's density and occupancy of the Level of a carrier confined in a QD. There are two cases : when the cross - section of the internal absorption losses has a influential amount and a nather it case when approaching zero border. As well as, we study the impact of the parameters on the threshold current density and its compounds. In addition, we study the role of these parameter to determining the maximum temperature of QDL operation through effect on temperature rang of the system.The temperature effects on the carriers’ activities in the system are studied, whereas the characteristics temperature of QDL has been studied in the two cases : with / without internal losses.The effects of structure and control parameters are applied to Study many factors. Such as : surface density of QD, mean size of QDs, optical confinement layer, spontaneous radioactive recombination time and resonator losses.

دراسة تاثير جهود المصيدة على سلوك الدالة الموجية في تكثيف بوز اينشتاين Study influence of the trapping potentials on the behavior of the wave function in Bose - Einstein condensation

اسم المؤلف: وليد حميد عبد المالكي
اسم المشرف: خالد محمد جياد الموسوي خالد محمد جياد الموسوي
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: This dissertation have been studied and analyzed the wave function behavior under trapping potentials that are usually used in experiments which led to formed Bose - Einstein condensation in ultra cold gases. The wave function behavior is dealt with under the effect of three types of potentials : the Harmonic oscillator, the double well, and the Optical Lattice. These are used individually, overlapped together, and when two different kinds are shed on each other in an orthogonal form. Besides, factors and variables that have major or minor roles in potentials the distribution that determine the wave function behavior is discuss in this dissertation.And study parameter ???????? range of effect on the nature of the Harmonic oscillator trapping potential and the Wave Function distribution, this factor effect is studied under the effect of the Harmonic oscillator Trap. As well as, studying this parameter effect on the Wave function behavior under the effect of other three types of potential traps used in Bose - Einstein condensation which are : the Optical Lattice potential overlapped with the Harmonic oscillator potential, the Optical lattice potential orthogonally shed on the harmonic oscillator potential. Also, studied the wave function behavior under the effect of the double well potential when the range of distribution centre is ∓0.5 and when the distribution centre increases to ∓2.And also discussed the effect of the nonlinear G on the wave function behavior under the effect of the Harmonic potential in terms of value and distribution. Through studying under the effect of the Harmonic potential, it have noticed that there is a linear relation between the energy and the chemical voltage at the centre of the trap as well asbetween the wave function and Energy. Yet, the linear relation is not exist between Energy and the frequency rate ???????? as well as between the wave function and the chemical potential. While there is a nonlinear relation exist under the effect of the optical lattice potential overlapped with the Harmonic potential at the centre of trap as well as the relation is exist between the wave function and the energy at the centre of the trap. It is noticed that when the optical lattice potential orthogonally shed on the Harmonic potential a linear relation exists between the energy and the chemical potential with anisotropy value and this linear relation becomes more clear at high value of anisotropy while the wave function behavior increases exponentially with anisotropy values. Furthermore, we have studying the effect of Factor ???????? and Factor ???????? on the Wave Function behavior under the harmonic potential trap plus the optical lattice potential .

دراسة مقارنة بين ليزرات الابار الكمية والنقاط الكمية Comparative Study Between Quantum Wells and Quantum Dots Lasers

اسم المؤلف: وطن حمود جبر
اسم المشرف: جاسب عبد الحسين مشاري
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
الجامعة: جامعة البصرة
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: In the work we present a comprehensive comparison between the dynamics of quantum well and quantum dot semiconductor lasers working autonomously using two models, the first describe the temporal variation of carriers and photon densities respectively in the quantum well lasers and the second describe the carriers occupancies in the wetting layer and quantum dot and photon occupancy in the quantum dot lasers .The study was carried out on the delay time and level of the dc part of their power under the effect of the many parameters that appeared in those models. Both lasers dynamics were studied in the presence of injection current modulation which enhances lasers power range from periodic to chaotic one with varieties of periodic states such as period.1, period.2, period.3, period.4 and period.6. Developed chaos was noticed to occur.We propose and investigate a simple method to obtain complex output power from both lasers via pulse shaping of the injection current. During the three methods studied we noticed similarities and discrepancies in both lasers dynamics.

دراسة تاثير ليزر النديميوم ياك (Nd+3 : YAG) النبضي على خلايا دم الانسان خارج الجسم Study ofQ - Switched Nd+3 : YAG Laser Effect on Human Blood Cell in Vitro

اسم المؤلف: منى جبر لفتة
اسم المشرف: حسن حمادي محمد مزاحم محمد عبد الله
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء الحياتية
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: Nd+3 : YAG laser wavelength(1064)nm and the two other wavelength, namely λ=532nm and λ =355nm,were used. Many blood sample groups were exposed to these laser wavelengths to study the physical and biological effects appeared as a result of interaction of laser beams with human blood cells. Variable energy densities of these laser wavelength extended from (53.11mJ/cm2 to1990.45mJ/cm2) were employed in these experiments. Sixty human blood samples were collected which included mails with age between(20 - 35)years and weights between (60 - 75)gm. These samples were distributed into three groups : (a) The first group : Twenty human blood samples were exposed to laser (λ=355nm) with energy densities extended from (53.11mJ/cm2 to 1328.18mJ/cm2). The exposure time was fixed to (100sec) and the laser repetition frequency was (5Hz).White blood cells were counted before (control sample) and after laser exposure. types of WBC revealed, fluctuation in the count rates which didn’t reach the level of significant effect. The red blood cells results revealed a numerical changes in the Packed cell volume (PCV) depending on laser power densities. These Changes indicate that the laser affected the cells visbility . On the other hand, The spectroscopic results have been influenced, the optical properties of hemoglobin blood. The decrease in absorbance of hemoglobin and oxyhemoglobin as a function of laser influence gives a further evidence of changes in optical properties as compared with the control samples.(b)The second group : These group samples were exposed to laser wavelength (λ=532nm) with laser, energy densities range extended from (79.62mJ/cm2

دراسة تاثير الترابط والقدرة الضائعة في الموجهات المترابطة على كفاءة المجمع - الموزع البصري باستعمال طريقة الفروقات المحددة Study The Effect of Coupling and Crosstalk in Directional Couplers on The Performance of Multi / Demultiplexers Using Finite Differences Method

اسم المؤلف: منصور حنظل منصور زغير
اسم المشرف: صباح مهدي محمد امين
الموضوع العام: علوم الفيزياء
السنة: 2017
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: Directional couplers can be used to make important planar optical integrated circuits for optical communications, such as Mach - zehnder interferometers and wavelength division multiplexers. Wavelength division multi/demultiplexing of optical signals is an efficient means to increase the information density per fiber.Both the coupled mode theory and the FD numerical method are used in this study to analyze multiwaveguide DCs.In this thesis, we present an analytical expression for crosstalk of MWGDC based on relationship between the normal modes and local modes, where these modes are obtained numerically using FD mothed.Also, the mode field profile and their evolution along the structure are presented through the analytical expression and calculated numerically using FD method. With the help of this analytical expression, the input power can be controlled to be enter from a chosen hannel. This enable us to calculate the crosstalk that corresponds to a certain input channel.The transmission characteristics of a four channel multiplexer based on three MZI can be described in terms of the propagation matrices. In this study, the coupling coefficient of DC and the phase shift of MZI are treated to be wavelength dependent parameters. Crosstalk introduced by such process are also calculated.The transmission characteristics of three arm MZI as a DWDM is investigated theoretically by deriving the propagation matrix of 3WGDC using coupled mode theory. Thus, two parameters are introduced,  and  , as a designing controlling parameters for DWDM devices. By adjusting these parameters a DW DM devices can be presented.

دراسة نظرية للتركيب الالكتروني الحجمي والسطحي لسبيكة نصف هيوسلر FeCrSe والحد الفاصل (111) FeCrSe/GaP Theoretical Study of the Bulk and Surface Electronic Structure of the Half Heusler Alloy FeCrSe and the Interface of FeCrSe/GaP(111

اسم المؤلف: مظاهر حبيب جولان الاسدي
اسم المشرف: Mudhahir H. Jolan
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
الجامعة: جامعة البصرة
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: قدمنا في هذه الدراسة ايضاحات مهمة حول الخواص المغناطيسية والتركيب الالكتروني في سبيكة نصف هيوسلر FeCrSe. وقد بينت النتائج ان FeCrSe هي مادة فيرومغناطيسية نصف معدنية عند ثابت الشبيكة المتوازن هو 5.506Å، وان العزم المغناطيسي الكلي المحسوب هو 2μB يخضع تماما لقواعد سليتر - بولنك. بالاضافة الى ذلك، بحثنا على نطاق واسع الخواص الالكترونية والمغناطيسية والنصف معدنية للسطوح (001) و(111) لسبيكة نصف هيوسلر FeCrSe والحد الفاصل مع القاعدة GaP (111) باستعمال حسابات المبادئ الاولية ضمن نظرية الكثافة الدالية. وتوضح كثافة الحالات الذرية ان الصفة النصف معدنية المثبتة في الحجم FeCrSe تكون محفوظة عند السطح (001) المنتهي بـ CrSe - والسطح (111) المنتهي بـ Se - ، ولكنها فقدت عند السطوح (111) المنتهية بـ Fe - وCr - والسطح (001) المنتهي بـ Fe - . علاوة على ذلك، للحد الفاصل FeCrSe/GaP (111)، تكون الصفة النصف معدنية للحجم محطمة عند الهيئة Se - P بينما يبين الحد الفاصل والحد الثانوي الفاصل Se - Ga تقريبا استقطاب برم 100%. ضمن هذه الدراسة اوضحنا، من حسابات طاقات التلاصق (γ) للحد الفاصل ان الشكل او الهيئة Se - Ga هو اكثر استقرارا من الاخر Se - P. وايضا درسنا العزوم المغناطيسية، فلاحظنزايادة العزوم المغناطيسية المحسوبة لـ Se وGa عند الحد الفاصل Se - Ga (111) وP عند الحد الفاصل Se - P (111) مقابل قيم الحجم المناظرة لها بينما العزم المغناطيسي الذري لذرة Se عند الحد الفاصل Se - P (111) يقل. ونلاحظ ايضا ان العزوم المغناطيسية للحد الفاصل الثانوي لذرة Fe عند كلا السطحين الفاصلين Se - Ga (111) وSe - P (111) تقل مقارنة بقيم الحجم. | In this study, important illustrations about the electronic structures and the magnetic properties of half - Heusler alloy FeCrSe.The results show that FeCrSe is half - metallic ferromagnet at equilibrium lattice constant (5.506 Å). The calculated total magnetic moment of 2.00 μB follows quite well the Slater - Pauling rule . We investigate extensively the electronic, magnetic, and half - metallic properties of the half - Heusler alloy FeCrSe (111) and (001) surfaces and the interface with GaP (111) substrate by using the first - principles calculations within the density functional theory. The atomic density of states demonstrates that the half - metallicity verified in the bulk FeCrSe is maintained at the CrSe - terminated (001) and Se - terminated (111) surfaces, but it is lost at both Cr - and Fe - terminated (111) surfaces and the Fe - terminated (001) surface. Furthermore, for the interface of FeCrSe/GaP (111), the bulk half - metallicity is destroyed at Se - P configuration while Se - Ga interface and subinterface show nearly 100% spin polarization. We explained within this study, the calculated interfacial adhesion energies exhibit that Se - Ga shape is more stable than the Se - P one. We also studied the magnetic moments, The calculated magnetic moments of Se, Ga at the Se - Ga (111) interface and P at the Se - P (111) interface increase with respect to the corresponding bulk values while the atomic magnetic moment of Se atom at the Se - P (111) interface decreases. We also notice that the magnetic moments of subinterface Fe at both Se - Ga and Se - P (111) interfaces decrease compared to the bulk values.

قياس مستوى الاشعاع الطبيعي في منطقة القبلة في محافظة البصرة The Measurement of Natural Radiation Level in Qubla District in Basrah Governorate

اسم المؤلف: محمد قاسم خضير
اسم المشرف: عبد الرضا حسين صبر
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: فيزياء الطاقة الشمسية
الدرجة: ماجستير
الجامعة: جامعة البصرة
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: The aims of this study is to measure the natural radioactivity in the selected areas from the province of Basrah using solid state nuclear tracks detectors SSNTDs both types of CR - 39 and LR - 115type Π to determine the concentration of radon gas. Gamma spectrometer Sodium Iodide NaI was used also to find specific activity of 238U, 232Th, 226Ra and 40K, in soil. This action is considered necessary from the point of view prevention of radiation hazard associated natural radioactivity of the soil in those areas and its impact on them. The first chapter includes an introduction to radiation and to shed light on the sources of radiation, natural and man made. Chapter 2 contains a highlight of radon gas and to identify the health effects of this gas as important sources of radiation in nature that can enter the human body through breathing. Chapter III contains the identification of the study area and samples collection of and preparation methods of the samples. The preparation of the measuring cylinder for measuring radon gas concentration at dwelling presented in the area. The natural gamma radioactivity measured by the NaI(Tl), also presented in the same chapter. This chapter also clarified; the equations used in calculations of radon gas concentration, the equations used to measure the specific activity of 238U, 232Th, 226Ra and 40K in selected soil samples taken from the area and assess the hazard indiceis caused by radioactivity (Raeq). Chpter 4, contains a review of methods used in the measurements includes materials and equipment used. Chapter five includes our findings from this study which is shows that, The radon gas concentration in dwelling has been measured found to be in the range of; 11.91 ± 1.3 Bq / m3 to 606.7 ± 66.52Bq / m3 with average value equal to 78.51Bq / m3, which is much less of the value specified by the United States Environmental Protection Agency EPA a 150Bq / m3 and this does not constitute a high risk to the health. The next part of this research; is the measurement of the natural gamma radiation emitted by the surface soil. We found that the lowest value for the concentration of isotope 226Ra is 2.5Bq / kg and maximum value was 147.4 Bq / kg with range of 47.3 Bq / kg. The minimum gamma concentration of 238U is 0.09 Bq/kg, while the maximum value is 94.7Bq / kg and an average of 23.5Bq / kg .The minimum concentration of 232Th is 1Bq / kg and maximum value of 83.9 Bq / kg at a range of 41.1Bq / kg. The minimum value of 40K was found to be 1 Bq / kg and the greatest value is 1048.6 Bq / kg and an average of 499.2 Bq / kg.All of these results are within the rangeof permitted and there is no rise in the value of the concentration of radioactive elements naturally calls for action to clean up pollution action cleaning , As for the soil of the region have indicated results found that the greater the intensity of the effects recorded in the soil of the area studied detector CR - 39 is 56187.5±3533.9 Track/cm2 while the lowest value was 1437.5±90.413 Track/cm2,which can be relied upon in radon concentration and content of radium account effective, but for the detector LR - 115TYPE it was found that the greatest density of the recorded Track 17250±1085 Track/cm2,while the less dense traces recorded Track 188±12Track/cm2 .

دراسة نظرية لفحص نقل الالكترون خلال نقطتين كميتن مقترنتين Theoretical Study to Investigate the Electron Transport Through Double Coupled Quantum Dots

اسم المؤلف: محمد عبد الزهرة نجدي
اسم المشرف: هيفاء عبد النبي جاسم
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: In this study, a model calculation is introduced for the electron transportthrough a system consists of two quantum dots coupled serially, embeddedbetween two nonmagnetic leads (source and drain), due to the importance ofthis kind of systems in many academic and experimental applications.In our treatment, the time independent Anderson - Newns Hamiltonian modelis considered as a basis to study the system dynamics and then to derive spindependentanalytical formula to calculate the occupation numbers of thequantum dots energy levels, the corresponding quantum dots energy levelsand the molecular virtual energy levels, as a function of bias voltage .These relations are solved self - consistently, which are all employed tocalculate the tunneling current. The differential conductance is calculatednumerically by using finite differences method.And as the efficiency of electron transport through coupled quantum dotsdepends on the system parameters such as the energy levels position of eachquantum dot, the Coulomb repulsion energy on each quantum dot, theeffective exchange energy, the tunneling coupling between the dots and leadsand the coupling energy between the two quantum dots, all these parametersare studied and investigated in details and the role of all these parameters inthe tunneling current and the differential conductance calculations ispresented. also our treatment is applied to two kinds of systems, when thequantum dots are symmetric and when they are asymmetric depending on ourchoice for the over mentioned parameters. Our treatment is utilized to studythe following : 1 - - - Two regimes are studied, the first is the strong coupling regime and thesecond is the weak coupling regime.2 - - - The role of the spin exchange interaction in determining the type ofinteraction (if it is attractive or repulsive) between the quantum dots.3 - - - The role of the spin exchange interaction between the quantum dots indetermining the coulomb blockade in the strong coupling regime.And according to our calculations, we conclude that at the strong couplingand when neglecting the effective exchange interaction, one can determinethe bias voltage values that correspond to the maximum values of thedifferential conductance which is equal to the value of the couplinginteraction between the quantum dots. And the maximum and minimumvalues in the differential conductance curve are changed when the quantumdots energy levels are lying below the energy reference. Also, ourcalculations that concern to the effective exchange interaction make it sure that our results can be utilized to study the electronics that related to the coupled quantum dots. Our calculations that related to the Coulomb blockade make it sure that one can use the quantum dots molecule as an electronic switch. Our calculations that concern to the gate voltage effect investigation in the case of equilibrium can be employed in the detection about the type of coupling with the environmental which effects directly in determining the rates of electron tunneling from the left lead to the active region and then to the right lead.

دراسة الخواص البصرية والكهربائية ومحدد القدرة البصري للصبغات العضوية المشوبة للاغشية البوليمرية STUDY OF THE OPTICAL AND ELECTRICAL PROPERTIES,AND OPTICAL POWER LIMITING OF ORGANIC DYES DOPED POLYMER FILMS

اسم المؤلف: فيصل صادق ثامر
اسم المشرف: عماد الدين حسين علي السعيدي
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
الجامعة: جامعة البصرة
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: This thesis contains results of a extensive study for many important and fundamental properties of two organic dyes, these are Phenol Red and Light Green SF Yellowish. To obtain the dye doped polymer films used for our study, the Polymethylmethacrylate (PMMA) polymer was doped by each one of these dyes , at different concentrations : 0.01, 0.02, 0.03, 0.04, 0.05, 0.30, 0.40 mM . Effect of adding small amount of Iodine (I2) , as a dopant, to the constituents of the dye doped polymer films at concentration of 0.03 mM for each dye, on the optical and electrical properties of the polymer films, was also studied. Casting method was used for preparing the dye doped polymer films samples.The present work involves the study of the linear and the nonlinear optical properties, and the optical power limiting of the dye doped polymer films, as well as study of the electrical properties of these films.We have studied the optical properties of both the dye - doped polymer films and the dye - doped polymer films with Iodine (I2). The study includes the following parameters : absorbance (A), transmittance (T), reflectance (R),iiabsorption coefficient (α), extinction coefficient (k), refractive index (n), dielectric constant (ε) with its real (εr) and imaginary (εi) parts, optical conductivity (σopt.), electrical conductivity (σelec.), and optical energy band gap (Eg).The results of the optical properties show that the dye - doped polymer films having high transmittance (T) , low reflectance (R) , and low absorption coefficient (α ) , over the wavelengths of the visible spectrum, and these films have energy band gaps belong to the indirect transitions. While the dye - doped polymer films with added different doping ratio of Iodine (I2), have low transmittance (T) and an increase in the values of reflectance (R) and absorption coefficient (α ), particularly in the absorption regions over the wavelengths near the ultraviolet (UV) region of the the electromagnetic spectrum.To study the nonlinear optical properties of the dye - doped polymer films, the laser beam z - scan technique was used with solid state laser (SSL) operating at the continuous wave (CW) at 532 nm. The laser output can be varied within the range 0 - 100 mW. The obtained results showed that the samples of the dye - doped polymer films as well as the samples of the dye - doped polymer films with Iodine(I2) have a nonlinear refractive index with negative value (n2 < 0) (occurrence of the self - defocusing effect) and aiiinonlinear absorption coefficient with negative value also (β < 0) (occurrence of the saturable absorption).We have studied the optical power limiting for the prepared films samples , using the laser beam z - scan technique. We have obtained optical power limiting with good optical properties. The results revealed that the smallest value for optical power limiting threshold is 15 mW for the Phenol red dye doped polymer film sample at concentration of 0.03 mM with Iodine doping ratio 36.2 % of the dye weight.Also, The electrical properties of the prepared samples, the dye - doped polymer films and the dye - doped polymer films with Iodine (I2), have been studied using the current - voltage (I - V) characteristic for three temperature degree values , which are given to these samples, these are : 298 K, 308 K and 318 K. The values of the electrical conductivity (σ) and the electrical conductivity activation energy (Ea) of polymer film were calculated. The influence of changing the temperature on these parameters was studied.The results obtained from the present our study indicate that the two organic dyes, Phenol Red and Light Green SF Yellowish, are good candidates for optical applications and they could be used for the photonic devices, the photo - electronic devices , and also in the optical power limiting

دراسة الخواص البصرية والكهربائية لبوليمرPoly (3 - Hioxy Thiophene, 2 - 5 dily) (P3HT) وتاثير اضافة صبغة Orang G على تلك الخواص مع تطبيقه في صناعة الخلايا الشمسية Study of the optical and electrical properties of Poly (3 - Hioxy Thiophene, 2 - 5 dily) (P3HT) and the effect of Orang G on the properties and it's application in Fabrication of solar cells

اسم المؤلف: فاطمة حميد مالك التميمي
اسم المشرف: وليد علي حسين
الموضوع العام: علوم الفيزياء
السنة: 2017
الموضوع الدقيق: فيزياء الطاقة الشمسية
الدرجة: ماجستير
الجامعة: جامعة البصرة
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: تم في هذه الدراسة تحضير اغشية رقيقة من بوليمر P3HT غير المشوب والمشوب بصبغة Orang G وبنسب تشويب Vol(1%,3%,4%,5%,7%,10% ) وبوليمر PEDOT : PSS غير المشوب وقد حضرت الاغشية بطريقة طلاء البرم .Spin Coating شخصت الاغشية البوليميرية المحضرة بواسطة الاشعة السينية X - Ray والاشعة تحت الحمراء FT - IR . اظهرت نتائج فحص الاشعة السينية X - Ray ان النماذج المحضرة لبوليمر P3HT غير المشوب والمشوب، اذ تكون اغشية البوليمر P3HT غير المشوب ذات تركيب عشوائي ونتيجة التشويب بدات النماذج المحضرة تكون شبه بلورية نتيجة تاثير صبغة Orang G المستخدمة. كذلك شخصت النماذج المذكورة انفا بطيف الاشعة تحت الحمراء FT - IR اذ اظهرت النتائج ان لهذه الاغشية مجاميع فعالة واضحة. درست كذلك الخواص البصرية لجميع الاغشية المحضرة كالامتصاصية(A) والنفاذية (T) والانعكاسية R)) ضمن مدى الطيف (300 - 900nm)،ودرس ايضا معامل الامتصاص(α) ومعامل الخمود(K) ومعامل الانكسار(n) وثابت العزل الحقيقي (ϵr) وثابت العزل الخيالي (ϵi) والتوصيلية البصرية (σopt) كدالة للطول الموجي . اظهرت الدراسة ان طيف الامتصاصية لاغشية المواد قيد الدراسة ضمن منطقة الطيف المرئي، حيث تم تسجيل اعظم قمة لبوليمر P3HT غير المشوب والمشوب بصبغة Orang G عند الطول الموجي 530 - 572nm)) وكتف (Shoulder) عند الطول الموجي 600nm .اظهرت الدراسة ان طيف الامتصاص لبوليمر PEDOT : PSS غير المشوب يكون ذات امتصاصية واطئة بحدود (0.1a.u) ويكون ذو نفاذية عالية تصل الى 85% .حسبت فجوة الطاقة البصرية للبوليمر P3HT غير المشوب فكانت (1.95eV) وتتناقص قيمة الفجوة مع زيادة نسبة التشويب حتى تصل الى (1.88eV)عند نسبة التشويب 5% Vol - (O.G) - P3HT،كذلك تزايد في كلا من معامل الامتصاص(α) ومعامل الخمود(k). تم حساب التوصيلية الكهربائية باستخدام ميزة(I - V)،ووجد ان التوصيلية الكهربائية تزداد مع زيادة درجة الحرارة والتي تكون ضمن مدى(30 - 70OC) وهو السلوك الغالب لجميع الاغشية المحضرة وهذا يدل انها اشباه الموصلات . تم حساب طاقة التنشيط لجميع الاغشية المحضرة ووجد ان طاقة التنشيط لبوليمر PEDOT : PSS تكون قليلة وهي بحدود (0.41eV) وهذا يفسر التوصيلية الجيدة لهذا البوليمر . ووجد ان طاقة التنشيط لبوليمر P3HT غير المشوب تكون بحدود0.6eV وعند نسبة التشويب بنسبة 1% Vol(O.G) - P3HT تصل طاقة التنشيط 0.4eV وبزيادة نسبة التشويب الى 5% Vol (O.G) - P3HT تصل طاقة تنشيطه الى 0.23 eV . استثمرنا النتائج التي تم الحصول عليها لعمل خلية شمسية ذات الطبقة الواحدة وحسبت معاملات الخلية الشمسية باستخدام ميزة (J - V) ووجد انها تكون ذات كفاءة تصل الى 0.1% عند نسبة التشويب 1% Vol(O.G) - P3HT وذات كفاءة 0.2% عند نسبة الشوائب 5% Vol(O.G) - P3HT Vol(O.G) - P3HT . | In this study thin films of un doped P3HT and (1%,3%,4%,5%,7%,10 %) Orang G doping P3HT and un doped PEDOT : PSS, have been prepared using spin coating method . The prepared films were characterized under XRD and FTIR .The XRD spectra shows an amorphous structures of the un doping which were become semicrystline as a results of doping . The FTIR spectra of un doping P3HT and pure (O.G) shows principle functional group as recorded in literature .The UV - IS optical properties related to absorbance (A), Transmit (T) and reflectance (R) in the rang (300 - 900) nm have been studies to and absorption coeffienct (α), refractive index (n), extinction coefficient (K) and the real dielectric constant (ϵr), and a imaginary dielectric constant (ϵi) as well as optical conductivity( σopt)funacton of Wavelength.In this found that un doping of P3HT and O.G doping thin films have broad bound peaks in the rang ( 530 - 572nm) with as shoulder at the wave length 600nm .PEDOT : PSS shows high transmittance of 85% . The calculated optical energy gap for un doping P3HT be (1.95eV) , and decreases with increasing O.G of doping reached to (1.88eV) at 5% Vol (O.G) P3HT doping .It is also that absorption coeffienct (α) and extinction coefficient (K), increasing as function of wave length (λ).The electrical conductivity (σ) due at (I - V) characteristic for un doping and O.G - doping found to be increases with increasing temperature for (30 - 70oC), for all sample . Shows is Organic semiconductors behavior .A activation energy of prepared thin films were estimated and found to be (0.41,0.6 ,0.4 eV) and 0.23 eV for PEDOT : PSS un doping P3HT ( 1% Vol (O.G) - P3HT ) ,(5% Vol( O,G) - P3HT) nespectivity . A inlayer solar cells wave constructers from the upper mention un doping and evaluated ,and found to have efficacies(0.1% ,0.2%) respectively.

تحضير ودراسة الانتقالات الالكترونية للمواد المتراكبة من البولي يوريثان وصبغة البنفسج البلوري PU/CV والبولي يوريثان وصبغة الحمراء المتعادلة PU/NR Synthesis And Study of the electronic Transition of Polymer Composite polyurathane , Crystal Violet (PU/CV) And polyurethane,Neuteral Red (PU/NR

اسم المؤلف: عماد عبد الرضا عريبي
اسم المشرف: علي قاسم عبد الله
الموضوع العام: علوم الفيزياء
السنة: 2017
الموضوع الدقيق: فيزياء الالكترونيات
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: In equals weight percent age adding to them the organic dyes ,crystal violet (CV) and natural red dye (NR) were applied as indicator in bioapplication in percentage weight (10% ,20% ,30% ,40% ,50%) thin films were prepration by to methods, firest by spin coating to optical properties and cast methods to electrical properties thin films characterization by FTIR to estimated the functional groups forPU and dyes , were the charts indicated the reaction between the PU and NR , while the mix between PU and CV are polymer compositen TO study the crystallinty of thin films we are use the XRD , the result shows amorphas structers Optical properties were studies in wavelength range (300 - 900 nm) , and From absorption and transmittance spectra we are estimated some optical Parameters like the absorption coeffici ent (α) The thin films have Sharpe absorption edge and the indirect transition while Direct transition to percentage (40% , 50%) the indirect transition to PU/NR Thin films the energy gap increasing with increase the wight percentage to To PU/CV while decreasing to PU/NR thin films and the values (1.53 - 1.93eV ) , (1.83 - 1.78eV ) respectively . Urbach energy (Eu) were also calculated and increasing the value of urbach States with increase the weight percentage for all thin films prepared . TheSome optical parameters can be calculated such as extication coefficient (K) And refractive index (n) , the real and imaginary parts(1,2 ) and the optical, Electrical conductivities (opt ,e ) as function to photon energy . W - D model adopted to estimated some optical paramters such as ( λο , N/mο , Sο , e ,eo , nο , M - 3 , M - 1 , Eο ,Ed ) All parameters tabulated , the PU/CV were more response from the PU/NR Electrical conductivity studies for thin films prepared by al (PU/CV) , (PU/NR)/AL and from measuring the current - olage / Al Characterization we calculated the electrical conductivity and activation energy accompanying electrical conductance operation and the value were (610 - 10 - 1.210 - 8 S/cm ) , (0.84 - 0.57eV ) ,(210 - 12 - 8.3510 11 S/cm ) ,(0.46 - 0.56eV ) respectively . We can see the conductivity value for PU/CV larger than the value of PU/NR and with increase and decrease because these related to the mix and Time preparation of PU/CV and PU/NR and the final is reaction between PU and NR dye not physical mix

دراسة نظرية للخواص النووية للانوية السوجية - السوجية 198 - 208Po و200 - 210Rn و218 - 228Ra و218 - 228Th و226 - 236U ا بسثعمال انموذج البوزونات المتفاعلة بنسختيه IBM - 1 وIBM - 2 Theoretical Study for the Nuclear Properties of the even - even 198 - 208Po,200 - 210Rn,218 - 228Ra, 218 - 228Th,226 - 236U by using the Interacting Boson Model IBM - 1 , IBM - 2

اسم المؤلف: علي فاخر حبيب
اسم المشرف: عبد الرضا حسين صبر
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
الجامعة: جامعة البصرة
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: This work aims to study the details the nuclear structure of selected heavy nuclei 198 - 208Po ,200 - 210Rn, 218 - 228Ra, 218 - 218 - 228Th and 226 - 236U, due to the important of nuclear structure of these nuclei in applied nuclear physics. In this study two IBM version have been used, IBM - 1 and IBM - 2. The versions of model used to described the ground band, quizi - beta and quadruple reduced transition probability B(E2) for selected transition. Also, the IBM - 2 version has been used to calculate the magnetic reduce transition probability B(M1) and mixing ratio for group transition emitted from ground band, quazi - beta and quazi - gamma band . the mixed symmetry states and the effect of majorana parameters of the energy of these state have been studied extensively .the potential energy surface of each isotope has been produced as contour lines using the output of IBM - 1.From the result calculation it is found that there is an agreement between the available experimental data and the calculated results of both IBM - 1 and IBM - 2 . The agreement concerns the energies of ground band and less in the beta and gamma band for 198 - 208Po isotopes. Also we have agood agreement in values of B(E2) and B(M1) from the results of the two version. It is noticed that all the studied isotopes are belong to the vibrational U(5) limit.The result of 200 - 210Rn isotopes show closed to the vibrational U(5) moving toward the O(6) . the calculated values are very closed the experimental data for the positive parity states of the ground, beta and gamma bands with increasing of energy value near the closed shell.The variable position of 218 - 228Ra isotopes between the three limits of IBM - 1 ((SU(3), O(6), U(5)) ,where is; these isotopes moving towards rotational away from the closed shell . We notice the excellent agreement between calculated values and available experimental data for energy level and other nuclear properties. The value of E41/E21 for 218 - 228Th isotopes decreases with moving away from the closed shell, in the same time; the values of level energies decreases also. The agreement between the experimental and calculated values of energy level is very clear for energy level and B(E2) and B(M1) values.All studied 226 - 236U are belong to the rotational SU(3) limit and both versions of the model succeed in producing such limit and found agood agreement for all the bands specially the IBM - 2. It is found that the change in the Majorana parameter FS has an effect on the energy of the mixed symmetry state in studies isotopes . The B(E2) values also calculated and compared with experimental data.In the comparison between all the studied nuclei it is found that systematic of energy level of single nucleus and all isotopes it is found that the energy of the first excited state is different for such isotope and also the ratio of E41/E21 found to be moving toward rotational limit with increase of atomic number. In the present work we found that the ratio N/Z is always agree when we used different isotopes in the studied nuclei

تحضير ودراسة خصائص الخلايا الشمسية الصبغية المتحسسة DSSCs Preparation and Study The Properties of Dye Sensitized Solar Cells

اسم المؤلف: علي عبود عبد الحجامي
اسم المشرف: ستار جبار قاسم باسل علي عبد الله
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: فيزياء الطاقة الشمسية
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: يقدم هذا البحث نوعا من الخلايا الشمسية التي تستخدم صبغة عضوية حساسة للضوء. حيث تستخدم هذه الخلايا غشاءا رقيقا من مادة ثاني اوكسيد التيتانيوم مغطى بطبقة من صبغة عضوية لامتصاص الطاقة الشمسية وتحويلها الى الكترونات حرة بحيث تحقن الى طبقة ثاني اوكسيد التيتانيوم الذي يعمل كجامع للالكترونات. وتتكون ايضا من محلول الكتروليتي للتعويض عن الالكترونات المفقودة من جزيئات الصبغة العضوية. وفي هذه الدراسة جرى تحضير اغشية رقيقة من ثاني اوكسيد التيتانيوم TiO2 بطريقتين, الطريقة الاولى هي طريقة العجينة paste وكان سمك الغشاء المحضر بحدود 30 مايكرومتر والطريقة الثانية هي طريقة Sol - Gel باستخدام جذور التيتانيوم ايثوكسايد Ti(OCH2CH3) وكان سمك الغشاء المحضر بحدود 12 مايكرومتر. وفي كلا الطريقتين لتحضير اغشية TiO2 جرى ترسيبها على القواعد الزجاجية المعدة لذلك لغرض دراسة الخواص البصرية لها مثل الامتصاصية والنفاذية والانعكاسية ومعامل الامتصاص ومعامل الانكسار ومعامل الخمود وثابت العزل العقدي بجزئيه الحقيقي والخيالي وفجوة الطاقة البصرية المباشرة وغير المباشرة, وجرى دراسة الخواص التركيبية والسطحية لهذه الاغشية بواسطة SEM وXRD وAFM. ومن ثم جرى تحضير الانود الضوئي للخلية الشمسية صبغات المالجيت الخضراء والمثلين الزرقاء والرودامين بي المذابة الايثانول كلا على حدة, بعد ذلك نقوم بغمر الاغشية الرقيقة للـ TiO2 المرسبة على ITO المحضرة بالطريقتين (paste وSol - Gel) في محلول الصبغة ثم نستخرجها من محلول الصبغة لتجف لتكون جاهزة لتحضير الخلية الشمسية. حيث كانت المساحة الفعالة للـTiO2 المحضر بطريقة Pasteهي 0.2 سنتمتر مربع, بينما كانت المساحة الفعالة للـTiO2 المحضر بطريقة Sol - Gel هي 0.16 سنتمتر مربع. بعد ذلك تم تحضير القطب المضاد من تحضير عجينة الكاربون. وذلك بصب العجينة على القواعد الزجاجية الموصلة ITO واجراء المعالجة الحرارية له ليكون القطب المضاد جاهز للخلية الاستعمال في الخلية الشمسية. اما الالكتروليت فقد تم تحضيره باذابة الايودين I2 مع يوديد البوتاسيوم في احد المذيبات التالية (ethylene Glycol ,DMSO, ethanol) كلا على حدة لتحضير نماذج مختلفة من الخلايا الشمسية ودراسة الفرق في مميزة الخلايا الشمسية لكل مذيب على حدة. وبعد تحضير اجزاء الخلية بصورة منفردة تم جمعها بطريقة السندويج. وحسبت مميزة (التيار - فولتية) للخلايا باستخدام جهاز قياس الخواص الكهربائية ومصدر ضوء من الزينون, ومنها تم حساب كلا من فولتية الدائرة المفتوحة Voc وتيار الدائرة المغلقة Isc والقدرة العظمى Pmax وعامل الملئ F.Fوكفاءة الخلية η ومقاومة التوازي Rs ومقاومة التوالي Rsh. وفي خطوة اخرى تم اضافة كمية من نترات الفضة الى الالكتروليت لمعرفة تاثيره على معاملات الخلية الناتجة. وكانت افضل كفاءة جرى حسابها للخلية هي ذات صبغة المالكيت الخضراء MG حيث بلغت كفاءتها 0.741% لخلية ذات TiO2 المحضر بطريقة Sol - Gel و0.25% لخلية ذات TiO2 محضر بطريقة paste باستخدام الكتروليت ذات مذيب ethylene glycol وتحسنت بعد اضافة كمية محددة من نترات الفضة AgNO3 الى الالكتروليت لتصبح 0.912% للـ Sol - Gel و0.303 للـ paste. اما بالنسبة للخلية ذات صبغة الرودامين بي وكانت افضل كفاءة جرى حسابها بلغت 0.69% لخلية ذات TiO2 المحضر بطريقة Sol - Gel و0.224% لخلية ذات TiO2 محضر بطريقة paste باستخدام الكتروليت ذات مذيب ethylene glycol وتحسنت بعد اضافة كمية محددة من نترات الفضة AgNO3 الى الالكتروليت لتصبح 0.881% للـ Sol - Gel و0.704% للـ paste.اما بالنسبة للخلية ذات صبغة المثلين الزرقاء وكانت افضل كفاءة جرى حسابها بلغت 0.302% لخلية ذات TiO2 المحضر بطريقة Sol - Gel و0.113% لخلية ذات TiO2 محضر بطريقة paste باستخدام الكتروليت ذات مذيب ethylene glycol وتحسنت بعد اضافة كمية محددة من نترات الفضة AgNO3 الى الالكتروليت لتصبح 0.501% للـ Sol - Gel و0.15% للـ paste. حيث بينت الدراسة ان اعلى كفاءة هي للخلية ذات TiO2 المحضر بطريقة Sol - Gel وصبغة Malachite Green مع اضافة كمية من نترات الفضة الى الالكتروليت كانت, وان افضل مذيب للالكتروليت هو ethylene glycol. | This research involves in preparing solar cells that use a light - sensitive type organic dye. These cells produce the use of thin of titanium dioxide, that is covered with a layer of organic material, absorb solar energy and use it to free electrons. These electrons are injected into a layer of titanium dioxide. The cells also consist of a electrolyte solution to compensate for the lost electrons from the organic dye molecules. In this study, thin films of carbon dioxide titanium TiO2 is used to prepare in two ways, the first way is the way the paste and the membrane thickness about 30 micrometers. The second way is the way Sol - Gel using titanium Ethoxide roots and has been deposited thin membrane in the form of layers until obtain the desired thickness of Ti ( OCH2CH3) and the membrane thickness has 12 micrometers. In both methods the prepared membranes TiO2 were deposited on glass bases prepared for the purpose of examining the optical properties. Also, studies were made for structure and surface of this membranes by XRD and FESEM and AFM. Solar cells are prepared by dissolving amount of dyes Malachite Green, Methylene Blue and Rhodamine in ethanol separately, Then immersing the thin film of TiO2 precipitated the ITO prepared both ways (paste and Sol - Gel) in the dye solution, then bit we produce here from the dye solution to dry to be ready to prepare the solar cell. Where the effective area of the TiO2 is prepared by Paste is about 0.2 square centimeter, while the effective area of the film in a way TiO2 was prepared by Sol - Gel is about 0.16 square centimeter. The counter electrode is made by preparing a paste of carbon as been the Carbon powder Black is the size of nanoparticles to slimy of TiO2 solution, then adds to distilled water to the mixed using a rock and mortar (Mortar), and then pour the dough rules on the glass conductive ITO, and subjected to heat 250 degree Celsius for one hour to be ready to counter - electrode cell used in the solar cell. The electrolyte uses in this research as prepared by dissolving the amount of iodine I2 with the amount of potassium iodide in one of the following solvents (ethylene Glycol, DMSO, ethanol) away from light to study the difference between the electrolyte resulting from these solvents. It is after the solar cell DSSC pigment assembly. The calculated characteristic (current - voltage) of cells using Keathly device and light source of xenon, Both the open circuit voltage Voc and the closed - circuit current Isc and the vast ability Pmax factor overfilling F.F and efficiency of the cell η and the parallel resistance Rs and series resistance Rsh were calculated . In another step it has been added to the amount of silver nitrate to the electrolyte to see its effect on the resulting cell parameters. The best efficiency is calculated for the cell of a dye Malachite green MG which of efficiency reached 0.741% for the cell with TiO2 at the Sol - Gel and 0.25% for the cell with TiO2 at the paste using electrolytes with solvent ethylene glycol and improved after the addition of a specific quantity of silver nitrate AgNO3 to the electrolyte to become 0.912% of Sol - Gel and 0.303 of the paste. The cell with a dye Rhodamine B is studfish best and found to have efficiency 0.69% of the cell with TiO2 that formed as Sol - Gel and 0.224% for the cell with TiO2 paste using electrolytes with solvent ethylene glycol and improved after the addition of a specific quantity of silver nitrate AgNO3 to the electrolyte to become 0.881% of Sol - Gel and 0.704% of the paste. The efficiency of the cell with a dye Methylene Blue is calculated and found to be 0.302% for the cell with TiO2 prepared by the Sol - Gel method and 0.113% for the cell with TiO2 prepared by the paste method using electrolytes with solvent ethylene glycol and improved after the addition of a specific quantity of silver nitrate AgNO3 to the electrolyte to become 0.501% of Sol - Gel and 0.15% for paste. This study shows that the highest efficiency of the cell prepared by the TiO2 Sol - Gel method and dye Malachite Green, When the amount of silver nitrate was added to the electrolyte, and the best solvent of the electrolyte was ethylene glycol.

دراسة الخواص البصرية والكهربائية لصبغات عضوية Study of optical and electrical properties of organic dyes

اسم المؤلف: علي ستار جبار الصيمري
اسم المشرف: وليد علي حسين فرات احمد مهدي
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
الجامعة: جامعة البصرة
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: In this study, thin films of polyvinyl alcohol (PVA) doped with Orange G , Safranin O , and Crystal Violet dyes , have been prepared by using casting method after dissolving the dyes with distilled water .The linear optical parameters of the prepared thin films such as absorption coefficient (α) , extinction coefficient (k) , refractive index (no) and energy gap (Eg) , in addition to Urbach tails (Eu) , both real (εr) and imaginary (εi) parts of the dielectric constant , optical conductivity (σopt) , and electrical conductivity (σele) have been studied. The non linear absorption coefficient (β), non linear refractive index (n2) and the susceptibility of the third order (χ3) have been studied too .It is found that the absorption spectra of the prepared thin films are characterized by a clear absorption peaks in the visible range of the light spectrum . For Orange G two absorption peaks were appeared at the wavelengths (325 nm) and (490 nm) , where as one absorption peak is observed for each of Safranin O , and Crystal Violet at the wavelength (540nm) and (600nm) respectively. It is worth noting that the different concentrations of the dyes have an obvious traces on the absorption intensities of the thin films , which may be related to the extended Urbach tails as a result of increased dye concentration and (π - π*) transition .The estimated energy gaps gave an indication that an indirect allowed electronic transition take place and it is inversely slightly affected by the concentration of the dyes.The non linear optical properties for the prepared thin films were studied using Z - scan technique . Three different cases in which the materials are ; thedye solution consist of the dye dissolved in distilled water , the dye solution mixed with the polymer , and the dye doped thin polymer film , were studied using continuous wavelength (532 nm) solid state semiconductor laser type (SDL - 532 - 100T) .The results indicated that the calculated (β) and (n2) increases as a results of increase in the concentration for all the three mentioned cases . Defocusing due to thermal distribution through the samples which were accompanied with a changes in non linear refractive index were shown , that is , the samples behave like a thermal lens that distort the phase of the propagated beam in it .The (I - V) characteristics for all thin films give an indication of Ohmic behavior and the DC electrical conductivity (σele) increases as the temperature increase . The activation energies (Ea) were found to be decrease at higher dyes concentrations .

حسبة كثافة الحالات الالكترونية للسطح في تفاعل الايونات البطيئة مع سطوح المعادن والاغشية الرقيقة Calculation of surface density of states in slow ion interaction with metal surfaces and thin films

اسم المؤلف: علاء عادل شنيف الغزي
اسم المشرف: طالب عبد النبي سلمان
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: فيزياء الالكترونيات
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: This study included in using a theoretical model that already made to calculate the probability of the electronic Emission from the surfaces of Metals as a result of helium ion scattering at these surfaces , the ions motion is at the direction of the surface and depends on the atomic level broadening and the emitted electrons spectrum , also on probability of neutrality or survival of the ion , to initiate the theoretical model to calculate the electronic density of states of the surfaces of metals and thin films using experimental data of previews studies of the Auger neutralization spectrum for this surface .From the experimental data we calculate the Auger transform , , considering the electronic density of states in the valence band to the surface as convolution forming to Auger transform and by using fourier,s transformations we get the electronic density of states at the surfaces of Nickel Ni, Copper Cu, Aluminum Al and tungsten W and for same thin film such of MgO , MgCaO, MgSrO.

تحضير ودراسة بعض الخصائص الفيزيائية للمتراكب بولي انلين طين الكاؤولين العراقي Preparation and study of the Some physical properties of imbricated Polly Aniline - IraqiAlca?lan clay

اسم المؤلف: عباس عبد سويف البديري
اسم المشرف: غفران محمد باقر شبيب
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
الجامعة: جامعة البصرة
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: Polyanilin/Alcaulan Iraqi clay was modify by mecanochemical method with ideal condition and temperature range (0 - 5)0c after distillation Aniline (monomer) well.Several techniques have been used such as FT - IR ,X - ray to determine the crystalline ,scanning electron microscope (SEM) and finally (FAM) in order to study the surface roughness mediated .Many of physical properties such as mechanical properties which represented by hardness curves at different temperature which proved in hardness values range (2 - 7) for Alcaulan clay and (3 - 9.5) for PAni/Alcaulan while the results of tests fracture resistance (according to Brazilian way ) in different temperature was (2.9 - 4.92) for Alcaulan clay and (3.1 - 5.01) for PAni/Alcaulan .Optical properties show the type of electronic transition which found indirect transition and the optical energy gap about 2.15 eV.PAni/Alcaulan films was prepared by adding hydrochloric acid HCL after dissolved it in DMF as well as with addition to sulfuric acid H2SO4.The value of electrical conductivity of PAni - HCL/ Alcaulan are (0.4*10 - 7, 0.6*10 - 7, 0.7*10 - 7, 0.8*10 - 7, 0.9*10 - 7) s/cm. The value of PAni - H2SO4/Alcaulan are (4*10 - 7, 6*10 - 7, 6.5*10 - 7, 7.3*10 - 7, 9.1*10 - 7) s/cm.Also the value of electric conductivity of PAni - HCL/ Alcaulan with Iodine are (2*10 - 7, 6*10 - 7, 8*10 - 7) s/cm , and of PAni - H2SO4/Alcaulan are (19*10 -

تضمين البرم في ليزرات اشباه الموصلات (ليزرات البرم) Spin Modulation in Semiconductor Lasers (Spin lasers

اسم المؤلف: ضیاء جبار عكوش
اسم المشرف: حسن عبد الله سلطان
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
الجامعة: جامعة البصرة
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: The introducing of electronic spin with its charge is the key of many applications which uses the electrical and magnetic properties of the electron , (spintronics )and semiconductor lasers.This concept gives led to the newest type of semiconductor lasers called ( Spin Lasers ).In the present thesis a numerical study of the effect of the carriers spin on the semiconductor lasers described by VCSEL using Matlab and Runge - Kutta method .The study includes the effect of the spin polarization in terms of the polarization injection and the injection current also to find the two thresholds of right polarized light circularly and the left circularly polarized one.The effect of the spin relaxation time on the dynamics of spin - VCSEL such as the steady state time evolution and direct modulation of the injection current and the polarization injection were studied also is presented too.The study shows that the spin VCSEL strongly affected by the injection current , polarization injection and spin relaxation time.The present results show that the laser threshold can reduced to quarter than that of conventional laser.

تحضير ودراسة بعض الخواص الكهربائية والبصرية للبوليمر الموصل بولي (انيلين اوكزالك) - وامكانية تطبيقاته في الخلايا الشمسية preperation and studying some of the electrical and optical properties of conducting polymer poly(aniline - oxalic) and the possibility of its applications to solar cell

اسم المؤلف: صفا نزار رمضان
اسم المشرف: غفران محمد باقر شبيب
الموضوع العام: علوم الفيزياء
السنة: 2017
الموضوع الدقيق: فيزياء الطاقة الشمسية
الدرجة: ماجستير
الجامعة: جامعة البصرة
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: We present in this study away of preparing Poly(aniline - oxali) (PAni - ox) by a Chemical polymerization with an ideal environment and temperature (5 - 0)0C. The Optical properties have been studied included the absorbance and transmitance measurements and calculations of the energy gap for (PAni - ox), which was found equal to (2.6eV). Electrical properties of (PAni - ox) have been also studied. The electrical conductivity for these materials was ( 8.22x10 - 2S.cm - 1) at room temperature.Thin films of titanium dioxide TiO2 of particle size (50 nm) and (25 nm) have been prepared and then deposited on a conductive glass bases Fluorine doped tin oxide (FTO) to study the optical properties.The materials under study have been diagnozid by using several techniques including X - rays (XRD) technique to determine the crystalline structures , Infrared (FT - IR) to determine the effective groups ,and Atomic Force Microscope (AFM) to determine the surface roughness and the regularity range of the nanoparticles compositions. Optical Anode was prepared by adding (PAni - ox) to TiO2, and the efficiency of the solar cell was calculated Two types of pigments alpha - Naphtholbenzein and EOSIN Y were added to TiO2 films and the prepared polymer is (PAni - ox). The pigments absorbs the solar energy and converte it to free electrons that are injected into titanium dioxide, which works as a collector for electrons. Electro solution was added to compensate for the loss electrons from the organic dye molecules. Thereafter, the electrode for the solar cell was prepared from carbon which has been obtained from candle flame.After preparation, the individual parts of solar cell have been collected by multi - layeres method . The (carrent - voltage) feature for cells by electrical properties have beem measured device and Light source.From this measurement , we calculate the open circuit voltage Voc and closed - circuit current Isc ,maximum power Pmax ,filling factor F.F, cell efficiency η, and Parallel resistance Rs and Resistance respectively Rsh.

تاثير م عاملات الاضطراب الجوي على حسابات منظوما ت المدى الليزرية Effect of Atmospheric Turbulence parameters on Laser Range systems calculations

اسم المؤلف: صادق عطية راشد
اسم المشرف: حسن حمادي محمد
الموضوع العام: علوم الفيزياء
السنة: 2017
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: In this thesis, an equation of atmospheric turbulence factor were derived the effect of such factor of the laser beam path of Er - Glass laser of ( 1.54m)wavelength. The results were copared at distances and propagation modes of laser beam in the atmosphere. Analysis system was used to determining the effect of atmospheric turbulent parameters, which are : laser beam radius at transmitter Wo, turbulent factor turb τ and intensity correction at target surface Pshape . And received power at photo detector for laser range finder LRF, additional study of effect the variation of refractive index strcture paramete 2 n c , inner - scale turbulence l , and the aperture dimension of photo receiver rec. r on the values and shape of receiving power, according the signal to noise ratio SNR equation , maximum range of the LRF in different weather conditions and compared with the results of the international literatures. New equation of Gaussian beam for calculation the efficiency of LRF system performance in the turbulent medium. Analytical comparsion for power and range calculations from the concluded equation of the Gaussian beam which take into consideration the effect of the turbulent attenuation in the range calculation, A special equation for power shift in the different two cases, which are in the present and absent of turbulence.A partical addition to this study, the weather elements are measured in to the Basrah city atmosphere locally with the maximum range Rmax for the LRF in the two different season summer and winter.An equation of receiving rangeof laser target designator system LTD using Lambert function is estimated and compared its results with concluded equation of recent researches. MATLAB - 7 sorces code program were written to declare the effect of turbulent parameters on ranging and disgnation calculations, also describe the effect of the laser beam power variation in range calculations. The ideas and results of this study are used to design an LRF and LTD in different weather conditions and alternative weather turbulent variance.

الخواص البصرية اللاخطية ومحدد القدرة البصري للصبغات العضوية في المحاليل والاغشية البوليمرية باستخدام تقنية مسح حزمة الليزر على المحور z Nonlinear Optical Properties and Optical Power Limiting of Organic Dyes in Solutions and Polymer Films Using The Laser Beam Z - Scan Technique

اسم المؤلف: سيف الدين عبد الكريم قاسم
اسم المشرف: عماد الدين حسين علي السعيدي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
الجامعة: جامعة البصرة
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: The research in this thesis is concerned with our extensive study of the spectral properties, the nonlinear optical properties, and the optical power limiting effect, for three organic dyes : Leishman, Giemsa, and Brilliant Cresyl Blue. Three different solvents were used to dissolve each dye : Chloroform, Ethanol, and Dimethyl(formamide) (DMF).We prepared dye solutions at four different concentrations : 0.03 mM, 0.05 mM, 0.07 mM, and 0.09 mM. Dye doped polymer films at concentration 0.09 mM were also prepared by mixing the dye with the polymer poly(methylmethacrylate) (PMMA) which already dissolved in the chloroform and using the casting method to obtain the desired polymer films.The linear absorption spectra of the dye solutions and the dye doped polymer films for different concentrations were analyzed by using the double - beam spectrophotometer in order to find the spectral range for each dye .2Our study was focused mainly on the nonlinear optical properties of the dye solutions and the dye doped polymer films. We employed in this study the laser beam z - scan technique and the solid - state laser (SSL) operating with the continuous wave (CW) at wavelength 532 nm and with variable output power over the range 0 - 100 mW .We have also studied the effect of the laser beam intensity on the nonlinear optical parameters of the dye solutions prepared by dissolving each dye in the Dimethyl(formamide) (DMF) solvent. Two values for the laser beam intensity were used for irradiating the samples (The dye solutions), these are : 1.11 kW / cm2 and 2.22 kW / cm2.Our obtained results from the present study reveal that all solutions of the three dyes and the dye - doped polymer films have a negative value for the nonlinear refractive index (n2 < 0) (occurrence of the self - defocusing effect) and also a negative value for the nonlinear absorption coefficient (β < 0) (saturable absorption).The values of the nonlinear optical parameters for each dye were calculated, these parameters are : The nonlinear refractive index (n2), the nonlinear absorption coefficient (β), and the absolute value of the nonlinear optical susceptibility (|χ(3)|). The solvents effect on the values of these optical3parameters was studied, and we find that the solvent plays an important role on the variation of these values.We also studied the optical power limiting for the dye solutions and the polymer films by using the laser beam z - scan technique. Good optical power limiting properties were obtained. The values of the optical power limiting threshold for the dye solutions at different concentrations and also for the dye doped polymer films were determind. We note that the value of the optical power limiting threshold depends on the kind of the used solvent for dissolving the dye. The smallest value for the optical power limiting threshold is 6.7 mW for the Brilliant Cresyl Blue dye doped polymer in chloroform at concentration 0.09 mM, while the smallest value for the power limiting threshold for the Brilliant Cresyl Blue solution in the same solvent at concentration 0.09 mM is 7.8 mW. The value of the power limiting threshold depends the kind of the used dye or the kind of the used solvent in preparing the sample and also on the concentration of the dye.The results that we have obtained from our present study show that the three dyes, Leishman, Giemsa, and Brilliant Cresyl Blue exhibit large nonlinear optical effects, suggesting that they are good promising materials for applications in the nonlinear photonic devices, the optical power limiting, and other optical devices.

تحضير اغشية رقيقة من اوكسيد الخارصين ZnO النقي والمشوب بالالمنيوم باستخدام تقنية المحلول ودراسة خواصها البصرية (Sol - Gel) الغروي وتطبيقها كمتحسس غازي Preparation of Pure and Doped with Aluminum Zinc Oxide (ZnO) Thin Films by Using (Sol - Gel)Technique and the Study of Optical Properties and Applications as A Gas Sensor

اسم المؤلف: سعد عبد الله جبر الفاضلي
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
الجامعة: جامعة البصرة
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: In this study, Zinc Oxide (ZnO) thin films are prepared by using Sol - Gel technique . The samples are prepared with different thicknesses (58,69,77)nm . Different weight ratio of Aqueous aluminum chloride (AlCl3.6H2O) are added to the Sol - Gel ZnOwith percentage (0.345%, 0.824% , 1.703% and 2.146%). These solutions are deposited by using spin coating on glass substrate .In order to investigate the sensitivity and the response of these samples for the detection about different vapors and gases (ethanol , methanol , acetone and nitrogen ) , pure and (AlCl3.6H2O) doped ZnO films are prepared by using the same technique but by adding Aluminum electrodes on these films with dimensions (2.5x0.5)cm2 .This preparing is followed by thermal treatment for these films by using oven with temperature reaches to 450 oC.The structure properties of these films are studied by using X - ray diffraction (XRD) and the results show that these films are polycrystalline and the calculated lattice constant are close to the standard values . The samples are analyses by Field Emission Scanning Electron Microscopic (FESEM) and the results show that the grain arrangement are regular and these structures are packed and the grain shape is as spherical . But for the AZO films , we notice that the increasing of the doping percentage reduces the gra in size .We also study the optical properties of these films such as Absorption (A) , Transmission (T) , Reflection (R) , Absorption coefficient (α) , extinction coefficient (k) , the energy gap(Eg) , refractive index (n) , with its complex and real dielectric constant( ) , dissipation factor (tanδ) , Optical Dispersion Parameters (Eo , Ed) and optical conductivity ( ) . The effect of the films thickness on the optical properties of the ZnO films for the over mentioned parameters . The results we get are discussed and compared with other studies . This work elucidates and analyzes the studying of the effect of adding (AlCl3 . 6H2O) o Zinc Oxide (ZnO) and the results are with standards agree with the results of many other researchers . The optical constant are tabulated and compared with , the results of other . And in order to determine the electronic transitions type , Absorption coefficient is calculated and it shows that ZnO and AZO films have transition of direct type because the values of α > 104 . The energy gap of the ZnO films with different thickness (58,69 and 77) nm is calculated , since it is found that the increasing of the film thickness gives slight increasing in the energy gap . The experimental results show that the increasing of doping percentagein ZnO film increases the energy gap with very little amount . In the electronic application field , the study also included design and fabrication of gas sensor system from local materials , which contain of chamber that made of plates polymer that contain of base for install the sample , electrodes to link the sample the measurement circuit , glass flask with three holes , heater , N2 gas cylinder , glass tubes , valves and the measurement circuit electric .The study also includes the ability of responding of the films for the thicknesses (58 , 69 and 77 )nm , to these gases , and it is found that the highest response was at vapor ethanol at the thickness 58nm. The effect of chloride Aluminum on the response of these percentage (0.345% , 0.824% , 1.703% , 2.146%) is studied for the mentioned gases , and it is found that the highest response we get is 45% at the concentration 2.146% for methanol gas . The results are tabulated , discussed and compared with precedent studies.

دراسة تراكيز الرادون والثورون والراديوم ومعدلات الانبعاث الكتلي والتبخر السطحي للرادون في البقوليات الجافة والعسل الطبيعي Study of Radon , Thoron , Radium concentrations ,as well as the mass and surface exhalation rates in dry legumes and natural honey

اسم المؤلف: سارة عبد اللطيف كديمي
اسم المشرف: عيسى جاسم محمد الخليفة
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
الجامعة: جامعة البصرة
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: In this study a sample of 50 different dry legumes and honey used (local and imported), the number of dry legumes samples under study were 21, including 5 samples of local and imported 16 samples collected from the Governorate of Basrah markets - Iraq. 29 samples of honey collected from local markets and apiaries in Iraq. The number of local honey 8 samples while the number of imported honey were 21 sample.Two methods in this research for various measurements and comparison between them. It is a method of (Misdaq and Satif.,1996) and the method of (Azam., 1995). Both methods are considered long - term methods for measuring the concentration of radon and thoron in various materials, Solid State Nuclear Track Detectors (SSNTDs), a closed cylinder technique method. Results in the first part of the samples dry legumes have shown that radon concentration ranges between a higher value (698.9Bq / m3) in thesample (Turkish lentil (imported)) and less valuable (69.0Bq / m3) in the samples (Iranian Homs and Chinese beans (imported)),and the concentration of thoron between the highest value (865.0Bq / m3) in the sample (Chinese beans (imported)) and the lowest value (86.45Bq / m3) in the sample (Canadian lentil (imported)), and that the radon concentration rate and thoron for samples local dry legumes (3551.1Bq / m3), (364.1Bq / m3), respectively. For samples imported dry legumes the radon concentration rate and thoron (333.0Bq / m3), (420.8Bq /m3 respectively For the results of the honey samples in the first part has found that the radon concentration between the highest value (826.7Bq / m3) in the samples ( AL - noor Honey (Basra - Seder) (Local)) , (Honey AngizaGerman (imported)) and less value (242.9Bq / m3) in the sample (Honey Mount Haj Omran (Local)), and the concentration of thoron between a higher value ( 538.4Bq / m3) in the sample (Turkish Honey) and the lowest value (115.2Bq / m3) in the sample (Honey Mount Haj Omran (Local)) , and that the concentration of radon and thoron samples of local honey rate (457.5Bq / m3), (297.0Bq / m3), respectively. For samples imported honey, the radon concentration and thoron rate(469.0Bq/m3) , (314.1Bq/m3) , respectively. Results obtained in the second part of the samples dry legumes note that the concentration of radium between the highest value of a (2.4489Bq / Kg) in the sample (Indian Homs (imported)) and less valuable (0.4030Bq / kg) in the sample (Indian Mash (Imported )), and that the concentration of radium samples local dry legumes rate (0.8941 Bq / Kg). For the samples dry legumes imported, the concentration of radium rate (0.9270Bq / Kg), the results obtained in the second part of the samples honey note that the concentration of radium ranges It is among the highest value (1.7270Bq / Kg) in the sample (Honey fall Karbala (Local)) and less valuable (0.2111Bq / Kg) in the sample (Honey Mount Haj Omran (Local)), and that the concentration of radium samples of local honey rate (0.7441 Bq / Kg). For the samples of imported honey, the concentration of radium rate (0.6141Bq / Kg).Results mass emission rates of radon samples dry legumes, ranging from the highest value (0.4442Bq.Kg - 1.d - 1) in the sample (Indian Homs (imported)) and the lowest value (0.0731Bq.Kg - 1.d - 1) in the sample (Indian Mash (imported)) , and the arithmetic average of the mass emission rate of the samples the local dry legumes (0.1540 Bq.Kg - 1.d - 1), and for dry legumes imported (0.1681 Bq.Kg - 1.d - 1), and the results of area emission rates radon samples dry legumes, ranging from the highestvalue (2.0405 Bq.m - 2.d - 1) in the samples (Indian Homs and Turkish lentil (imported)) and the lowest value (0.5681Bq.m - 2.d - 1) in the sample (Indian Mash (Imported)), and the arithmetic average of the rate of the area emission rate of surface samples local dry legumes (1.0865 Bq.m - 2.d - 1), and for samples of imported dry legumes (1.1589 Bq.m - 2.d - 1). Results mass emission rates of radon samples of honey, ranging from the highest value of ( 0.3132 Bq.Kg - 1.d - 1) in the sample (Honey fall Karbala (Local)) and the lowest value (0.0383Bq.Kg - 1.d - 1) in the sample (Honey Mount Haj Omran (Local)), and the arithmetic average of the mass emission rate for samples of local honey (0.1359 Bq.Kg - 1.d - 1), and for samples of imported honey (0.1114 Bq.Kg - 1.d - 1), and the results of area emission rates of radon samples of honey, ranging from the highest value (3.1286 Bq.m - 2.d - 1) in the sample (AL - noor Honey (Basra - Seder) (Local)) and the lowest value (0.6257 Bq.m - 2.d - 1) in the sample (Honey ount Haj Omran (Local)), and the arithmetic average of the rate of area ssion samples of local honey (1.4828 Bq.m - 2.d - 1), and for samples of imported honey (1.1670 Bq.m - 2.d - 1).

دراسة حركيات ليزر النقطة الكمية بوجود البرم Study of Dynamics of Quantum Dot Laser with Spin

اسم المؤلف: حكمت عبد الحسين ابراهيم
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
الجامعة: جامعة البصرة
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: The dynamics of VCSE QD spin polarized laser is studied based on asix equations model that takes into account the effect of number ofcontrol parameters on populations in the wetting layer for bothpolarized components and those in the quantum dot .The carrier density in the wetting layer and the quantum dot vary indifferent manner although the former lends to the later . Also thedynamics of carriers in the quantum dot shows varieties of dynamicsthat range from simple to complex one while the dynamics of carriersin the wetting layer are always simple .The polarized field related to the spin up and spin down cases sufferseffects in different manners due to the variations of these controlparameters . the intensities of both two polarized components behavioralso range from simple and end up chaotically.It appears that output ellipticity can be used as a new tool to assess the dynamical state of the laser wither it in stable , periodic , aperiodic or chaotic .The modulation of the injection current for both components or for either one led to new dynamics , the system was not able to show when it work autonomously although the model has five degrees of freedom .

خصائص نقل الالكترون العابر لانظمة نقاط كمية متعددة Transient Electron Transport Properties of Multiple Quantum Dots Systems

اسم المؤلف: حسه ابراهيم عسكر
اسم المشرف: شاكر ابراهيم عيسى
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: فيزياء الالكترونيات
الدرجة: ماجستير
الجامعة: جامعة البصرة
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: We presented a theoretical study for the electron transportcharacteristic, within a system of multi - quantum dots coupled tothe three metallic leads (right lead as an electron reservoir andtwo left leads as an electron source). We take into account twoarrangements for the scattering regions, one composed of twoquantum dots and the other is composed of four quantum dots.The study concentrated on the system parameters that has itseffect on the characteristic of the electron transfer process andhow these characteristic are affect by the number of the quantumdots in the scattering region in the both arrangements for thescattering regions.The theoretical formulism depends on the one - electron model.Where, we assigning a single effective level for each quantumdots and by taking the effects of the leads continuum levels intoaccount which are show within the wide band gap approximationto produce an imaginary quantity add to the energy levels of thequantum dots, representing the broadening in each effectivelevels.The related basic equation of motion for all the correspondinglevels eigen function probability amplitudes are solvedanalytically by using Laplace transform technique. We calculatethe occupation probability for the right lead, the instantaneouscurrent and the average instantaneous current that passes throughthe right lead.Our calculated results for the time - dependent dynamical electrontransfer offered a general features that takes into account thefollowing effects :  Energy levels position changes with respect to the leadFermi level. A suitable applied bais voltage on the right and left leads. Changes of the coupling amount among the quantum dots levels and in between them and the leads levels. Change of the leads temperatureThe characteristic of the time - dependent charge transport in the system are shown through the relation between the average instantaneous current passes the right lead and the applied baisvoltage, which we show as follow :  For the case of the scattering region arrangement that compose of two quantum dots it is an Ohmic behavior. For the case of the scattering region arrangement that compose of four quantum dots it is a non - linear (non - Ohmic) behavior.

دراسة تركيز البورون في مياه محافظة ذي قار وتربتها باستخدام طريقة الكارمين وجهاز اللوفي بوند Study of Boron Concentration in Water of Thi - Qar Governorate and Soil Using Carmine Method and Lovibond Device

اسم المؤلف: تغريد عبد الحسين شاكر
اسم المشرف: ثائر منشد سلمان
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: In this study , we measured the boron concentration in the water and soil of Thi - Qar Governorates, where were collected (45) Sample Water also were collected (66) Sample soil from the districts of Thi - Qar and its environs province of southern Iraq , and we used that analogy chromatography Al carmine method (colorimetric carmine method) . we got the highest concentration of boron (0.801 ppm) in Garmat Bani Said area - Al Greej and the lowest value for the concentration of boron measured Al carmine manner of samples of clay in said Dhkeel - Al Ibrahim (2) area (0.368 ppm) . The concentration of boron has been in samples of mud rate in the province of Thi Qar was (0.614 ppm) also were measured exponent pH and ranged results between (7.208 - 8.368 ) and an average of (7.890) . As well as we used measurement chromatography Al carmine to measure the boron concentration in water samples way . We got the highest value for the concentration of boron water sample (1.057 mg / L) in Garmat Bani Said area - center (1) and the lowestvalue for the concentration of boron measured Al carmine way in water samples in Al Fuhood zone - Amayreh(1) (0.251 mg / L) . Boron concentration of water samples in the province of Thi Qar rat was (0.592 mg / L) .The boron concentration of water samples located within the normal allowable ratio globally but some are relatively high . As well as the measured pH and the results were pH ranging between (7.435 - 8.277) and an overall average of (7.885) .It was also some water samples to measure the soil by a device (Spectro Direct Lovibond) we got the highest value for the concentration of boron in the water samples (1.4 mg / L) in Al Fuhood zone - Amayreh area (3) , and the lowest value for the concentration of boron in Al Nasiriya - Al shuhada zone (1) (0.4 mg / L) . The soil samples were measured by a device (Spectro Direct Lovibond) has the highest value for the concentration of boron we got them in Al Tar - Al hareb area (1.1 ppm) and the lowest value for the concentration of boron in Al Tar - Al Ebrat (0.2 ppm) .

دور تذبذب الجسر في نقل الالكترون خلال نظام مانح - جسر - قابل THE ROLE OF BRIDGE VIBRATION ON ELECTRON TRANSFER THROUGH DONOR - BRIDGE - ACCEPTOR SYSTEMS

اسم المؤلف: بهاء علي طالب
اسم المشرف: شاكر ابراهيم عيسى
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: فيزياء الالكترونيات
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: موضوع الرسالة هو دراسة تاثير اهتزاز الجسر وتكوين البولارون الصغير على عملية انتقال الشحنة بين المانح والقابل في الانظمة الجسرية الجزيئية. ولهذا الغرض تعاملنا مع اقتران الكترون - فونون قوي. واستخدمنا لهذا الغرض معادلات الحركة لسعات الدوال الكمية للنظام الجسري مع معادلة نمط الاهتزاز الديناميكي الكلاسيكي للجسر. بخصوص التعامل مع تقريب الحالة المستقرة والتقريب الساكن تم اعطاء صيغة لحساب طاقة البولارون وتقدير تاثيرها على عملية انتقال الشحنة الديناميكية بين المانح والقابل وبارامترات النظام التي تؤثر فيها. اذ لاحظنا ان الصفة العامة في منحنيات احتماليات الملء يكون اعتمادها على طاقة الجسر المؤثرة |∆(u)| اذ بزيادتها تقل احتمالية ملء مستوى الجسر ويقل عدد التذبذبات. ان وصفنا عملية منح البولارون بواسطة نظرية البولارون الصغير طورت لوصف الترابط القوي بين الالكترون والاهتزاز ضمن مفهوم البولارون الصغير، اي ان كل جسر يمكن ان يتذبذب (شبه) غير معتمد على تذبذب جيرانه من الجسور، او كل موقع جزيئي يتذبذب غير معتمد على تذبذب موقع جزيئي اخر. فضلنا المعالجة العددية في حل المعادلات والابتعاد عن الحل المستقر وتم حل معادلة النمط الاهتزاز الكلاسيكي حلا تحليليا بحيث يكون تاثير ترابط الكترون - فونون واضحا من خلال جعل مستوى طاقة الجسر معتمد على الزمن ويكون مسيطرا على احتمالية ملء مستوى الجسر. كما ان تاثير مستويات الطاقة المستمرة للقطبين المعدنيين على كل من مستويي المانح والقابل قد اخذ بنظر الاعتبار. وكان واضحا ان احتماليات ملء المستويات تضمحل بمرور الزمن وتتضاءل سعات التذبذب في المنحنيات، وان احتمالية ملء مستوى القابل هي الاكثر تاثرا بزيادة التعريض في المستويات. وايضا لاحظنا ارتباط تصرف احتمالية ملء مستوي الجسر مع تصرف احتمالية ملء مستوى المانح وذلك لان مستوى المانح هو مصدر الالكترون لتكوين البولارون مع الجسر.V وطبقت الصيغ الرياضية على عملية انتقال الشحنة خلال جزيئة الـ DNA. اذ تعاملنا مع نظام جسري ذي جزيئة اساس واحدة ونظام جسري ذي جزيئتين من الجزيئات المتسلسلة خطيا من جزيئات الحامض النووي الـDNA. اذ لاحظنا وجود اختلاف بسيط في احتماليات ملء المستويات بوجود القاعدة G/C او القاعدة T/A، او بوجود قاعدتين جزيئيتين، اذ لاحظنا ان التصرف الهام في منحنى احتماليات الملء هو عند زيادة ترابط الكترون - فونون نلاحظ تاثير تصرف منحنى احتمالية ملء مستوى مصدر الالكترون (المانح) على تصرف منحنى احتمالية ملء مستوى الجسر الاول (القاعدة الجزيئية الاولى) التي تكون على ترابط مع المانح وذلك لحدوث تشكيل البولارون الاول. بينما يكون تصرف منحنى احتمالية ملء مستوى الجسر الثاني مع تلك للجسر الاول غير متطابق بالتصرف وذلك بسبب ضعف اصرة الترابط بينهما. ويكون تصرف احتمالية ملء القاعدة الجزيئية الثانية مترابطا مع تصرف منحنى احتمالية ملء مستوي القابل وذلك لشدة الاصرة بين مستوياتهما. | The subject of thesis is the effect of bridge vibration and small polaron formation on the electron transfer (ET) in D - B - A system. For this purpose, we dealt with strong electron - phonon coupling. And we used for this purpose the equations of motion for quantum amplitudes and the equation of classical - dynamical vibration mode of the bridge system. For the case of steady state approximation and static approximation we gave a formula to calculate the polaron energy and estimate its effect on the dynamical ET between the donor and accepter and the parameters involved. where we note that the general feature of the occupation probability curves are depend on the bridge effective energy |∆(u)|, when it increases, the occupation probability and the number of vibration decreases. The description of polaron hopping by the theory of small polaron was developed to describe the strong coupling between the electron and vibration within the concept of small polaron, i.e. every bridge vibrates (semi) independently from neighboring bridges. we preferred the numerical treatment in solving the equations and get away from the static solution, we solved the equation of classical - vibrational mode analytically such that the effect of electron - phonon coupling became obvious by putting the bridge state in a time - dependent form, and controlling the occupation probabilities of the bridge. The effects of the continuous energy levels of the metlic electrodes on the donor and acceptor states is taken into account. And it was obvious that the occupation probabilities of levels vanish in time and so as the amplitudes of vibration, and the most obvious effect of continuous levels of electrodes is on acceptor state, also we note that the behavior of the bridge state occupation probability is related with the occupation probability behavior of the donor state, since the donor state is the source of electron for polaron formation in bridge site.We applied the mathematical formulae on charge transfer through DNA molecule. Where we dealt with bridge system as a single base molecule or two liner consecutive molecules bases of DNA molecules. Where we note there is a small difference in occupation probabilities of G/C base or T/A base or between that of two bases. The important feature in occupation probabilities curves is that when electron - phonon coupling increases, we note that the effect of the occupation probability behavior curve for donor state on the occupation probability behavior curve of the first bridge which is connected with the donor because of the formation of the first polaron, while the behavior of the occupation probability of the second bridge and that of the first bridge is not coincide because of the weak interaction between them, but the occupation probability behavior of the second bridge state is related with that of the acceptor because of the strong interaction between them

دراسة نظرية لبعض العوامل المؤثرة في سلوك دالة الموجة المستخدمة في تكثيف بوز اينشتاين

اسم المؤلف: ايمان عبد الرضا موحي المالكي
اسم المشرف: نوري حسين نور الهاشمي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
الجامعة: جامعة البصرة
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: This study entails some of the theoretical characteristics of Bose - Einstein intensification of the ideal gas properties, since the wave function behavior has been studied and analysed according to the effect three types of external potentials trapping that are used in the production Bose - Einstein condensation which are (harmonic potential, optical lattice potential , and double well potential) that have been used as individual or overlapping potentials, and the value of the non - linear has been confirmed according to fixed values in the whole study in order to the study the effect of the other elements. The effect anisotropy AL has been studied according to the behavior of the wave function and the distribution potential where the harmonic potential has individually at first, than it has been overlapped with the optical lattice potential in order to study this factor. Furthermore,the effect of this factor has been explained due to the distribution potential, function wave and relation type between the factor itself, chemical potential and energy. Additionally, we have used the intertwined harmonic potential with the optical lattice to study the effect of optical lattice potential factor q after confirming the harmonic potential AL at certain values, with exposition of it's effect the wave function behavior and distribution of potential with explanation to the nature of the relation between the chemical potential and energy with this factor. In addition to that, we have studied the influence of the center of double well potential coefficient A on the nature and behavior of the wave function and potential, and the nature of the relationship between this factor and chemical potential and energy. Noting the effect of these factors on the behavior of the wave function and the distribution of potential, therefore it has effect in Bose - Einstein condensation production.