Show: 25 50 75 100 Results

Search results: 50 out of 6,065

دراسة متانة الربط الانتشاري بين السيراميك والمعادن في الحالة الصلبة == Investigation of the Relaibility of Diffusion Bond Strength Between Ceramic - Metals in Solid State

Author name: اروى غازي ناجي الطائي
Supervisor name: زاريه ازات سركيس | ثامر عبد الجبار جمعة
General topic: Physics
Specific topic: Solid State and Materials Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:

دراسة تعجيل الالكترونات باستخدام تفاعل الليزر مع البلازما الممغنطة للاتصادمية == Study of Laser Acceleration of Electrons in a Magnetized Collisionless Plasma

Author name: امال محمد كنيوي العكايشي
Supervisor name: خالد عباس يحيى | محمد عبد الزهراء حبيب
General topic: Physics
Specific topic: Electronics Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: A theoretical and computational investigation was carried out in the field of laser - plasma interaction using the Finite Difference Method to study the acceleration of electrons with non - relativistic velocities in a non - magnetized and magnetized collisionless plasmas.First, a (Nd : YAG) laser pulse of 25 fs duration and 5x1015 W/cm2 intensity was assumed in the present study.When this laser pulse was allowed to interact with a stationary electron in vacuum, it was found that the electron is accelerated during the interaction only and returns to stationary state after the laser pulse has passed, in agreement with previous works.Also, the interaction of the same laser pulse with a collisionless plasma at electron density ne= 1x1018 cm - 3 was studied. It was noticed that the energy of the electron during the interaction has reached a maximum value of ~ 1 keV at laser pulse intensity of 5x1015 W/cm2, while the energy of the electron after the interaction reached ~ 15 eV for the same laser pulse intensity.Finally, the interaction of the same laser pulse with a plasma was studied at electron density ne=1x1018 cm - 3 in the presence of an external magnetic field for the three values of the field strength B= 60 MG, 70 MG and 80 MG. It was found that there is an increase in the acceleration of the electron to reach a maximum energy of ~ 19 keV at a laser pulse intensity of 5x1015 W/cm2 and an applied external magnetic field strength of 80 MG during the interaction. However, the electron energy after the interaction reached ~ 3 keV at a laser pulse intensity of 5x1015 W/cm2 and an applied external magnetic field strength of 70 MG. This is due to a sustainable generated laser wakefield of ~ 2x109 V/cm. Thus, it is concluded that an applied external magnetic field assists the acceleration of the electron and can subsidize for a high laser beam intensity

محاكاة العين البشرية باستخدام الخوارزمية الجينية == SIMULATION OF HUMAN EYE USING GENETIC ALGORITHEM

Author name: لؤي عبد الصاحب رسول الطائي
Supervisor name: سهى موسى خورشيد الاوسي | محمد صاحب الطائي
General topic: Physics
Specific topic: Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: The aim of this research is simulate an optical system for the human eye using Genetic algorithm. The considered optical characteristics of the optical system simulator include spot size (Z), spot diagram, and effective focal length (EFL). These characteristics are determined with the aid of some mathematical relations, which give the efficiency and accuracy of the adopted optical system design. The work has been performed in two stages : In the first stage, Genetic Algorithem optimization (GA) is used to get the best design by optimizing the optical featurs of the eye elements. The optimal eye design was tested using Zemax software, the test includes estimation of the image quality, and optimal performance for the proposed optical eye system.The second stage was implementing a specially developed software to simulate the behavior of the human eye. The simulator using visual basic 6 and works under Windows operating system, it is able to plot the eye design graphically, and can estimate the considered optical functions to determine the efficiency of the eye simulator.The simulator showed agood results for spot size, spot diagram and EFL, the present work has been gained some credibility when the considered optical functions achieved by the simulator are found compatible with those achieved by Zemax, since the comparison showed a behavioral matching between them, which ensure the correct path of the GA based eye design and the successful proposed eye design.

دراسة الفجوات المصنعة بهيئة عيوب بواسطة الاشعة السينية لمصبوبة المنيوم ومفاصل لحام الفولاذ == X - ray Radiographic Study of Simulated Voids - Like Defects in Aluminum Casting and Welded Joints in Steel

Author name: فرقد رشيد سعيد الزبيدي
Supervisor name: مازن فضيل محروك | ثامر عبد الجبار جمعة
General topic: Physics
Specific topic: Solid State and Materials Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: This project investigates the detection and evaluation of imperfections in internal structures of castings and welded joints by x - ray radiography. Optimum radiography conditions that lead to clear and high contrast image on the radiograph were studied.Equations derived earlier for finding the size and depth of defects in castings were used in this project to test their applicability to a wide range of geometrical parameters used in radiography.The importance of non - destructive testing NDT in industry is discussed. X - ray radiography being one of the NDT techniques, has some privilege over other techniques. For example, welded joints sometimes contain internal flaw or blowholes that may escape detection by other NDT techniques but can not escape detection by x - rays. Two kinds of samples are prepared for radiography. The first sample is aluminum casting through which two different sizes of steel spheres are included. This sample was radiographed from two opposite sides and the x - ray films were analyzed.The second sample is steel plates which are welded by arc welding and then radiographed by x - rays.Imperfections in this sample such as incomplete root penetration, undercut and porosity were detected by x - ray radiography. Different conditions influencing the preparation and radiography of the above samples were studied. The prepared welded sample was radiographed three times for different high voltages (120,140,160) kV respectively with an exposure time of (80) second. The best quality image where the defects can be detected clearly if its size is (5%) of the radiographed object using (120) kV and (140) kV. Moreover the results show that the optimum film gradient was found at (140)kV and the contrast is better than obtained with (120)kV while darkening image was found at (160)kV.In field of the aluminum casting, the two equations were derived earlier proved their capabilities as a right method for identification each of size and depth of such defects in castings and welded joints

دراسة قدرة الايقاف والمدى للبروتونات == Study of Stopping Power and Range for Protons

Author name: مصطفى عبد المحسن عبد العالي
Supervisor name: محمد احمد صالح
General topic: Physics
Specific topic: Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: The calculation of the value of stopping power and the range for the proton is done by two ways : first, using Bethe - Bloch formula and second, using Bragg - Kleeman rule. The differences between the experimental and theoretical values of stopping power and range required studying the corrections for Bethe - Bloch formula which are represented by the maximum energy and density correction and then comparing the results with experimental values. Using these two formulas it has been found that the results computed by the Bethe - Bloch formula without corrections (maximum energy and density correction) are in agreement with experimental results for βγ ≤ 2 ( E ≤ 2×103MeV ) and for βγ ≤ 102 ( E ≤ 105MeV ) with corrections. The maximum energy and density corrections contributed to decrease the difference with the experimental results for βγ ≥ 102 ( E ≥ 105MeV ).The values of stopping power computed using the Bragg - Kleeman rule are in agreement with experimental results for E ≤ 200MeV and the range values computed using the Bragg - Kleeman rule are in agreement with the results computed using the Bethe - Bloch formula for E ≤ 400MeV .The results show that the energy losses for protons at the high energy values are low and vise versa; the energy losses for protons at the low energy values are high.The present calculations confirm that the proton looses its largest energy at the end of its path in matter

تاثير المعاملة الحرارية على بعض الخواص الميكانيكية للمتراكب المنيوم - كاربيد البورون == Effect of heat treatment on some mechanical properties of Aluminum - Boron carbide composites

Author name: لمى جمال عباس الرماحي
Supervisor name: قاصد عبد الستار صالح الجنابي | سعد رحمة الله
General topic: Physics
Specific topic: Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: Aluminum matrix composites reinforced with boron carbide are currently employed in the nuclear industry. It's used as a control rod in nuclear reactors; Since B4C has very high absorption cross section for thermal neutrons. The objective of this work is to study the effect of heat treatment on the mechanical properties of the Al - B4C metal matrix composites prepared by powder metallurgy techniques. Compressibility was measured with the Al powder. The chosen compaction pressure was 2500psi. Samples were prepared by adding 5%, 10%wt B4C to Al as well as the Al powder. Sinterability was evaluated at different temperatures (400,450,500,550,600,650°C) during 2, 4, 6, 8; 10 hr for soaking time.Mechanical test were evaluated, showed little improvement in hardness, compressive strength and young's modulus in temperatures 400,450,500,550°C, and significant improvement in hardness and compressive strength in temperatures 600and 650°C, and also improvement to the elastic modulus. Specific samples were irradiated by neutron source, and mechanical tests showed little decrease in their mechanical properties (hardness and compressive strength) due to low neutron fluence available that gives insignificant effec

قياس تركيز باعثات الفا في الادرار البشري باستخدام كاشف الاثر النووي في الحالة الصلبة PM - 355 == Determination of alpha emitters concentration in human

Author name: شيماء ذياب عطية العبودي
Supervisor name: مازن مانؤيل الياس | ندى فاضل توفيق
General topic: Physics
Specific topic: Nuclear and Environmental Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: This work owes its importance to the fact that it aims at knowing and measuring the concentrations of alpha - particles emitters discrete by the human body in the urine in particular. Knowledge of these concentrations is extremely important since it reveals whether a person has received such doses of radioactive materials emitting alpha - particles that result in the occurrence of malignant tumor and mutations. This subject being so essential to the health of individuals and being a great help to physicians to make the proper diagnosis in the relevant cases, has imposed itself on us as the topic of this thesis. Human urine samples were taken from Iraqi workers in different fields (phosphate plants, fertilizer plants, teaching staff in nuclear physics laboratory, painters, patient and reference healthy people of different ages), using PM - 355 solid state nuclear track detectors. The exposure method was used by immersing PM - 355 detectors in urine samples for three weeks, then etching by 6.25N NaOH for 5 hrs. The track density was measured via an optical microscope. The alpha emitters concentrations in the urine samples were calculated in comparison with standard samples that were prepared in the nuclear laboratory of physics department - College of Science AL - Nahrain University.The obtained results show that the concentrations of alpha emitters in the urine samples of patients range from 1.81ppm to 2.87ppm , from 0.087ppm to 1.32ppm in reference healthy people, in painters from 0.77ppm to 1.46ppm,workers in phosphate plants from 0.94 ppm to 1.89 ppm, workers in fertilizer plants from 1.0ppm to1.42 ppm , and from 1.0 ppm to 1.29 ppm in teaching staff in nuclear physics laboratory .Deductions from the results of this work regarding the dependence of concentrations on the person's occupation, years of service, sex, age and health condition have been dealt with in sufficient details as required.

اثر التلدين على الخواص البصرية لاغشية اوكسيد الالمنيوم (Al2O3) الرقيقة المحضرة بطريقة الترسيب الكيميائي الحراري == The effect of annealing on the optical properties of (Al2O3) thin films prepared by chemical spray pyrolysis

Author name: عبير كمال جعفر
Supervisor name: خضير عباس مشجل | ابتسام محي عبد العزيز
General topic: Physics
Specific topic: Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: The recent study deal with the structural and optical properties of Al2O3 thin films prepared by the chemical spray pyrolysis technique at glass substrate(450°C) and studying the effect of annealing at different temperatures (500,550,600) °C on the optical properties.The results of X - ray diffraction showed that the prepared films are polycrystalline, the study of optical properties included the record of transmittance spectrum of the films with the wavelengths range from (300 - 900)nm, and then measuring the forbidden energy gap of electronic transitions where it was found that the values of the forbidden energy gap of both allowed and forbidden transitions are (3.4)eV and (2.5)eV successively and it was (1.6)eV for the allowed indirect transition. When annealing the Al2O3 thin films, the values of the forbidden energy gap of the allowed and forbidden of direct transitions are (2.7)eV and (3.6)eV and it is (1.9)eV for the allowed indirect transition. Also, absorption coefficient , reflectance and optical constants such as extinction coefficient, refractive index, dielectric constants with it's two parts real and imaginary and optical conductivity as a function of photon energy have been studied, the study showed that the annealing caused an increase in energy gap values, reflectance, transmittance, refractive index and real part of dielectric constant, and a decrease in the values of absorptance, absorption coefficient, extinction coefficient, imaginary part of dielectric constant and the optical conductivity.

نموذج بطارية باستخدام برامجيات PSPICE مع مغير شحن ثنائي الاتجاه == Pspice Battery Model with Bidirectional Charging Converter

Author name: زينة موفق قدوري حسين العزاوي
Supervisor name: زينب منذر يونس كبة
General topic: Physics
Specific topic: Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: This research intents to design Bidirectional Converter that can be used in wide applications from uninterrupted power supplies (UPS), photovoltaic (PV) and battery charging and discharging system, to auxiliary power supplies designed primarily with a general module depending on Orcad PSPICE program.Lead Acid battery model (12V) is putted, which is used in wide applications. The model consists of charge efficiency and battery voltage components. The charge efficiency factor can vary from (0 to 1) and is dependent on the Battery State of charge and charge current. The voltage component of the model consists of amp - hour integrator which tracks the net current flowing into the battery terminal (Battery voltage). The output of the integrator gives us the state of charge so, it is connected to a table driven voltage source, ETABLE, which generates the equivalent open circuit battery voltage. The method used here is implemented in orcad PSPICE program with bidirectional converter of properties (D=0.4, P=12W, Vo=12V, f=1 KHz, Io=1A).

دراسة لجودة الصورة للعين البشرية == A Study of the Image Quality for Human Eye

Author name: ازهار عويد كاظم
Supervisor name: صلاح عبد الحميد صالح
General topic: Physics
Specific topic: Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: The study of the effect of some factors on the human is difficult and complex because of the lack of instruments for measuring eye efficiency.The human eye is an optical organ, its work is similar to the camera work, but the eye can not return the image which it makes, but the camer a can return. Producing high quality image by human optical system like other lens system is affected by many parameters, some of them are internal such as aberrations and age, pigmentation. Also human eyes suffer from some defects that effect the human eye image quality, some of these defects are : 1. Hypermetropia (Long sightedness)2. Myopia (short sightedness) 3. Some other defects The optical characteristics of human eye imaging system are studied quantitatively via experimental and computer modeling. Experimental work is carried out to study the effect of spatial frequencies, color and ages on image eye quality. Computer simulations models are carried out to study the limitations imposed by imaging in the human eye. Theselimitations include the diameter of pupil eye, the aberrations (astigmatism and spherical), age, and pigmentation of eye. These limitations are computed in terms of modulation transfer function (MTF).The results showed that MTF curves are suitable for determining image quality and the limitions effect on imaging system. Also result showed a coincidence between laboratory work and theortical calculation of MTF for age, pigmentation, pupil size and aberrations

ميكانيكية الانتقال الالكترونية لثنائي شوتكي Al/c - Si/M == Electronic Transport mechanism of Al/c - Si/M Schottky Diodes

Author name: رسل عبد السادة عزوزعبود
Supervisor name: حسين خزعل رشيد | طالب سلوم حمادي
General topic: Physics
Specific topic: Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: تم في هدا البحث تحضير معدن - شبه موصل باستخدام تقنية التبخير الحراري بالفراغ,حيث استخدمنا اغشيه رقيقه من الانديوم والفضه والذهب والالمنيوم .حيث تم معامله الثنائيات Al/c - Si/Inو Al/c - Si/Ag وAl/c - Si/Au حراريا بدرجات تلدين مختلفة( 303, 373، 473) كلفن. التوصيل الاومي لهذه الثنائيات كان من معدن الالمنيوم بسمك 0.2مايكرومتر اما معادن اتصال شوتكي فقد كانت بسمك(0.1, 0.2) مايكرومتر وضغط تبخير بحدود 10 - 5 ملي بار. تم في هذا البحث ايضا دراسة تاثير حرارة التلدين وتغيير دوال شغل المعادن على الخصائص التقويمية للثنائيات عن طريق دراسة خصائص تيار - جهد ومتسعة - جهد لتلك الثنائيات, وقد لوحظ بان هناك تحسن بالخصائص التقويمية للثنائيات (انخفاض في عامل المثالية وفي كثافة تيار الاشباع العكسي). واظهرت الدراسـة ان كثافة تيار الاشباع Js)) وحاجز الجهد (ΦB) وعامل المثالية (n) تم حسابها باستخدام خصائص تيار - جهد ذات المقياس اللوغارتمي لاحـداثـي التيار. بينت خواص تيار - فولتية للثنائيات Al/c - Si/Inو Al/c - Si/Ag وAl/c - Si/Au بان تيار الظلام الامامي يتغير اسيا تقريبا مع فولتية الانحياز وهذا يتفق مع نموذج اعادة الاتحاد - الانتفاق ولوحظ نقصان تيار الظلام بزيادة السمك. ومن خلال قياسات تيار - فولتية تحت ظروف الاضاءة وجدنا ان التيار الضوئي يزداد مع زيادة درجة حرارة التلدين ويقل مع زيادة السمك . درست خصائص السعة - الجهد للتراكيب الثنائية Al/c - Si/Inو Al/c - Si/Ag ما عدا Al/c - Si/Au بسمك 0.2 مايكرو متر وبدرجات تلدين مختلفة. حيث قيست سعة الانحياز العكسي كدالة لفولتية الانحياز وبتردد 1 ميكاهيرتز وقد دلت هذه النتائج على ان السعة تقل بزيادة جهد الانحياز العكسي، وبزيادة السمك ودرجات حرارة التلدين. قيم جهد البناء الداخلي(Vbi) ، حاجز الجهد (ΦBp) وتركيز الحاملات (Na) تم حسابها باستخـدام علاقـة شوتـكي - موت] C - 2 vs. V [. اظهرت قياسات التوصيليـة المستمرة وباستخـدام علاقة ارهينوس] lnσ = f(103/T) [ وجود طاقاتي تنشيط Ea1وEa2 والقيم المحسوبه تشير الى ان طاقات التنشيط تزداد بزيادة درجه حراره التلدين .اظهرت قياسات التوصيليـة المستمرة وباستخـدام علاقة ارهينوس] lnσ = f(103/T) [ وجود طاقاتي تنشيط Ea1وEa2 والقيم المحسوبه تشير الى ان طاقات التنشيط تزداد بزيادة درجه حراره التلدين . | Metal - semiconductor (M - S) junctions are prepared in this study by thermal evaporation technique, in which we used indium (In), silver (Ag) and gold (Au) films and aluminum (Al) films. The Al/c - Si/In, Al/c - Si/Ag and Al/c - Si/Au diodes heat treated at different annealing temperatures 303,373 and 473 K. The ohmic contact was aluminum with thickness of about 0.2 µm and the Schottky contacts were indium, silver and gold with thickness of (0.1, 0.2) µm under vacuum conditions of about 10 - 5 mbar. The effects of annealing temperatures and work functions have been studied by current - voltage and capacitance - voltage characteristics. The I - V characteristics showed that the rectification properties of all prepared diodes were improved with increasing the annealing temperature and the metal work functions (the ideality factor and the saturation current density decreased). The ideality factor (n), saturation current density (Js) and the barrier height (ΦB) were calculated using I - V plots with semilogarithmatic scale. The current - voltage characteristic of Al/c - Si/In, Al/c - Si/Ag and Al/c - Si/Au junctions showed that the current varies approximately exponentially with applied voltage and the junction was coinciding with recombination - tunneling model, the dark current decreases with increase of the thickness. Under illumination, the photocurrent increases and decreases with increase of annealing temperatures and thickness, respectively. The C - V characteristics of Al/c - Si/In and Al/c - Si/Ag diodes have been prepared at different thickness except Al/c - Si/Au at thickness equal to 0.2µm and annealing temperatures. The reverse bias capacitance was measured as a function of bias voltage at frequency 1 MHz; the capacitance decreases with increasing the reverse bias voltage, also with increasing of thickness and annealing temperatures. The built - in voltage (Vbi), barrier height (ΦB) and the carrier concentration (Na) were calculated using Mott - Schottky plot (C - 2 vs. V). The d.c. conductivity measurements using Arrhenius plot (lnσ=f(103/T)) showed that there are two activation energies Ea1,Ea2.The electrical activation energies increase with increasing annealing temperatures.

طريقة مطورة لتحديد السرعة النصف قطرية للطائرة ‏باستخدام ازاحة دوبلر == An improved method for the determination of ‎airplane radial velocity using Doppler shift

Author name: جزيل حسين عزيز
Supervisor name: لؤي ادور جورج | ليث عبد العزيز العاني
General topic: Physics
Specific topic: Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: في هذا البحث تم تقطيع الملف الصوتي للطائرة المتحركة الى عدة مقاطع متساوية باستخدام النافذة المتشابكة, ثم بعدها تم تحويل كل مقطع من المجال الزمني الى المجال الترددي باستخدام تحويل فورير السريع0للحصول على الترددات المميزة تم استخدام النافذة المتحركة والتي يتناسب حجمها مع قيمة الترددات التي تم ملاحقتها, وهذه الالية تجعل من العمل يختلف عن العمل السابق الذي تم فيه استخدام نافذة ذات عرض ثابت في ملاحقة الترددات المميزة0 اذ تم اعتماد خوارزمية في انتقاء الترددات المميزة,وتعتمد هذه الخوارزمية على الترددات التي تخضع لقانون دوبلر بحيث ان ازاحة دوبلر تتناسب طرديا" مع قيمة الترددات المميزة, كذلك ان الترددات التي تم ملاحقتها هي الترددات الاكثر ظهورا" في طيف القدرة0لقد تم استخدام عدة احجام للنافذة المتشابكة من اجل دراسة تاثير تغير حجم النافذة على دقة ايجاد السرعة النصف قطرية للطائرة ومقارنتها مع النافذة غير المتشابكة0 تمت مفاضلة دقة النتائج من خلال عاملين هما : الاول، تقارب المنحنيات المرسومة للسرعة النصف قطرية كدالة للزمن للحالتين النافذة غير المتشابكة والمتشابكة، حيث كلما كانت المنحنيات متقاربة اكثر كانت النتائج افضل. والعامل الثاني، هو قيم مربع معدل نسبة الخطا لخطية العلاقة بين ازاحة دوبلر والترددات المميزة حيث انه كلما كانت قيم مربع معدل نسبة الخطا قليلة كلما كانت النتيجة افضل وهذا يعني ان الترددات المميزة الناتجة من الحسابات ستحقق معادلة دوبلر بشكل افضل0 كذلك تم استخدام ثلاث ازمان للمقطع الصوتي وهي (0.1ثا) و(0.15ثا) و(0.2ثا) ومن خلال النتائج التي ظهرت وجد ان الزمن (0.2ثا) لطول المقطع الصوتي يعطي نتائج افضل من بقية الازمان. بالاضافة الى ذلك تم اختبار عدة قيم لعرض النافذة وهي (0.01) و(0.03) و(0.05)، وقد وجد ان افضل قيمة لعرض النافذة هي (0.05). كما وجد ان نتائج استخدام النافذة المتشابكة افضل من استخدام النافذة غير المتشابكة0 | In this research the sound file recorded for a moving airplane has been sliced into several frames using overlapped window. Then the array of each frame is transformed from the time domain into frequency domain using Fourier Transform (FT).To determine the characteristic frequency of the sound, a moving window technique was used, the size of that window is made proportional with the values of the tracked frequencies, the use of this adaptive window makes the difference with a previous research work conducted for the purpose, in that work a fixed - size window is used to track all characteristic frequencies.An algorithm was established to select the characteristic frequencies, this algorithm allocates the frequencies which satisfy the Doppler relation, beside that the tracked frequencies was chosen to be the most occurred frequencies in the power spectrum. Several sizes of the overlap windows have been tested to study the effect of window size on the accuracy of the determined radial velocity of the moving airplane. The obtained results have been compared with the corresponding results of non overlapped window.The accuracy of the results was assessed using two criterion, the first is the closeness of the curves of the determined radial velocities versus time for the case of overlapped and non - overlapped window; the closer curves indicate better results. The second used criteria is the Root Mean Square Error (RMSE), which is used to determine the linearity of the relationship between Doppler shift and characteristic frequencies, the least values of (RMSE) signify better results are obtained. Three values of the frame size have been tested; they are 0.1s, 0.15s and 0.2s. From the attained results it was found that the frame size 0.2s gives better results than the other tested sizes. In addition several values of window size have been tested; they are 0.01s, 0.03s and 0.05s, the best value is found 0.05s. Also the results indicated that the use of overlap window gives better results than the case of using non - overlap window.

حسابات الامثلية لمنظومة مغاطيسية تتالف من حارف وعدسة == A Computational Optimization of Magnetic System Consists of Deflector and Lens

Author name: احمد حسين علي
Supervisor name: احمد كمال احمد | عدي علي حسين
General topic: Physics
Specific topic: Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: A computation investigation on the design of magnetic deflection and focusing system using the synthesis approach of optimization method has been done. By solving the paraxial ray equation using the Range - Kutta - Nystrom method the trajectories of the electron beam and the optical properties of the magnetic deflection and focusing system under infinite and zero magnification conditions has been computed.The synthesis approach of optimization method is used in the present work to finding the optimum design of magnetic deflection and focusing system which give rise to the minimum spherical, chromatic, spiral distortion, and radial distortion aberration.The toroidal deflection coil is used as the source of magnetic field, and then the field distribution is determined by using an exponential function. The moving objective lens concept is included in the computation of system field

تطبيقات الانموذج العنقودي المزدوج في الانوية الخفيفة == APPLICATIONS OF COUPLED CLUSTER MODEL IN LIGHT NUCLEI

Author name: علياء حسين السباهي
Supervisor name: ليث عبد العزيز العاني | سعد ناجي عبود
General topic: Physics
Specific topic: Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: احد الاكتشافات التي حدثت مؤخرا في الفيزياء النووية هي وجودالانوية السحرية(Halo nuclei). الانوية السحرية هي انوية ضعيفة الترابط حيث قلب النواة مع كثافة نووية طبيعية محاطان بمنطقة من مادة نووية مخففة كما في (كالنيوترون السحري). مثل هذه النوى تتواجد بكثافات خفيفة اوثقيلة, ان هذه الانوية موضوع بحث عدد كبير من الدراسات النظرية وكذلك العملية لغرض فهمها بطريقة اكثر وضوحا. ولهذا لوحظ خلال السنوات العشر السابقة اتسعت دراسة هذه الانوية. وفي هذه الدراسة تم فحص عدد من الانوية السحرية ومعالجتها بعدة طرق وايجاد بعض الخصائص الفيزيائية لهذه الانوية. في هذه الاطروحة تم فحص تركيب النوى السحرية الخفيفة من خلال الانموذج المجهري المتغير, هذا الانموذج هو عبارة عن توسيع لعمل سابق عن القشر المغلقة. تم استخدام الانموذج العنقودي المزدوج في هذه الاطروحة بالاعتماد على جسيمة الفا كاساس في الانموذج العنقودي وكذلك النيوترونات التي تظهر من خلال هذا الانموذج. كما تم معالجة الدالة الموجية بطرق التغاير وطريقة جاسترو للوصول الى دالة موجية اختبارية مقاربة الى الدالة الموجية الحقيقية.الدالة الموجية نحصل عليها من حالة االمصدر والتي تتضمن المتناظرات المطلوبة وتقدم وصف انتقالي (ثابت) للنظام يشكل عناقيد متعددة وغير مترابطة بعد ذلك نستخدم المؤثرات المترابطة ( بنوعيها المدى المتوسط الى الطويل الخطي والمدى القصير اللاخطي ) للحصول على دالة موجية جديدة, كم ان الدالة الموجية في الانموذج العنقودي تسمح بوصف الحركة الاهتزازية بين التجمعات داخل النواة. ان اهمية هذه الطرق تكمن في ايجاد حل لمعادلة شرودنكر كما تم الاعتماد على تفاعل نوية - نوية شبه الواقعية للوصول الى الجهد المطلوب, وان هذا البحث يتطابق مع مبدا باولي للاستبعاد. كما تم استخدام طريقة مونتي كارلو في هذا البحث وذلك لانها تمتاز بدقة رقمية عالية.وتولي اهتمام عالي لمتطلبات الانموذج الدقيقة. "والافضل استعمال المترابطات بحالة عشوائية كما يجب الاخذ بنظر الاعتبار تقدير الاخطاء بصورة اكثر دقة"في هذه الاطروحة تم استخدام الانموذج لفحص الانوية التالية : (5He,6He,8Be,9Be) وايجاد بعض الخصائص الفيزيائية لها من خلال ايجاد توزيع الكثافة لجسيم واحد ولجسيمين. بعدها نحصل على صورة نوعية لتوزيع المادة في النواة التي نحصل عليها وتجهيز تحليل معين لحالة مقيدة واحدة تتطلب قوة المدار - البرم في خطة مزدوج ( S - L ) ستظهر لنا انموذج قادر على انتاج حالات مقيدة يقترح لانظمة القشر المفتوحة بشكل اصطناعي لتعديل االتعبير المركزي للتفاعلات شبه الواقعية المستخدمة. كما تم ايجاد علاقة الطاقة مع عرض القشرة, وكذلك ايجاد سلوك النواة من خلال ايجاد العلاقة بين الطاقة والمسافة الى مركز كتلة جسيمة الفا. (5He ,8Be) هي انوية سحرية , نلاحظ السلوك العام للطاقة تقترب للحد الادنى وهذه يمكن ملاحظتها من المعدل الكروي لتوزيع الكثافة لجسيم وجسيمين,اما الانوية الخفيفة (6He,9Be) هي انظمة للقشر المفتوحة . في هذه الاطروحة تم كتابة البرامج باستخدا لغة الفورتران (77). | One of the recent discoveres in nuclear Physics is the existance of Halo nuclei . Therefore, halo nuclei are very weakly - bound exotic states of nuclear matter in which the outer one or two valence nucleons (usually neutrons), and a nuclear core with normal nuclear density is surrounded by a region of dulite nuclear matter, referred to as the neutron halo. Such nuclei occur from light to heavy masses and have been the subject of a alarge number of theoretical studies to try and understand them. A number of theoretical models have been proposed over the years. In this thesis the structure of light halo nuclei is examind through a fully microscopic variational model, where the Pauli exclusion princple explicity satisfied and semi - realistic nucleon - nucleon interactions are used. The model is an extension of previous work of closed shell nuclei. The wavefunction is obtained from a starting or reference state, which includes the required symmetries nd provides a translationally invariant description of the system in terms off several uncorrelated clusters. Medium to long - rang linear and short - range non - linear corrlation operators are then applied to obtained a good wavefunction, these models are important to solve the Shrodenger equation. The model developed is then used to examine the nuclei , , and . By making use of one - and two - body density distributions a qualitative picure of the matter distribution in the nucleus is obtained. The analysis provided indicates for a bound state one requires spin - orbit force, something that we don’t include. Nevertheless working in the L - S coupling scheme have shown that our model is capable of producing bound states for open - shell sysytems by artificially altering the central term of the semi - realistic interactions in use. And to find the relashonshipe between the energy and the width of shell, and find the behavioer of nuclei from throught the relation between energy and distance to the center of mass of alpha partical, 5He and 8Be are known halo nuclei. The general behaviour obtained was that the energy approached a minimum, as the separation between the several constituents increased. This could be monitored by observing the spherically averaged one - and two - body density distributions. We could clearly see that the energy was minimized as the one - body distribution broadened with the center shifting a way from the origin. The two - body density distribution separated into two parts : a main body similar to the alpha - particle and a small tale effect. We used algorithmic scaling in order to distinguish the two parts. Despite the fact our interaction is not adequate for the light halo nuclei of 6He and 9Be we demonstrated that our model can produce bound state for such open - shell systems by modifying the inter - nucleon force.in this thesis used programes in Fortran (77).

برنامج حسابي لحساب بعض خواص التراكيب البلورية == A Computational Program to Determine Some of Crystal Structure Specifications

Author name: لينا حسين علي
General topic: Physics
Specific topic: Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: البرنامج الحسابي crystal - 2 المصمم بلغة فيجول بيسك 6 صمم وطبق لتعريف خصائص ثلاثة انواع من البناء البلوري يتضمن قياس الابعاد البلورية(a, b, c) , الزوايا المحورية (α, β, γ) ,متوسط حجم الحبيبة (AGS) , نسبة الملئ (FF) والاجهاد المرن (ε) . هذا البرنامج سوف يعطينا وصف كامل عن البناء البلوري لثلاثة انواع من البناء البلوري للمواد المستخدمة بواسطة ادخال المعلومات من البيانات التي تتضمن زاوية الحيود (2θ) ومعاملات ميلر hkl للمواد المستخدمة مثل كبريتيد الكادميوم (CdS) والبريليوم (Be) ومقارنة القيم المحسوبة مع القيم النظرية للبيانات المدخلة للمواد المستخدمة.كما انه تم قياس (AGS) بواسطة استخدام نظرية شيرر وعامل المرونة بواسطة استخدام نظرية هول ويليامسون للمواد المستخدمة مثل كبريتيد الكادميوم . | Computational program "Crystal - 2" in Visual Basic 6.0 was designed and applied to identify the specification for three crystal structures includes the lattice parameters (a, b, c), the axial angles (α, β, γ), the Filling Factor(FF) foe CdS, the Average Grain Size (AGS) for CdS, and the Elastic Strain (ε) for CdS and CdTe. This program will give us a complete description on crystal structure for three crystal structures material by inserting a data which include the values of Miller indices (hkl), the diffracted angle (2θ) from ASTM data for cadmium sulfide, beryllium and compare the calculated values with the values of ASTM data used material. This program is includes many special calculations for a certain material such as cadmium sulfide that used to examine the cubic system and calculated lattice parameters were found to be a ≈ 5.82 Å, b ≈ 5.83 Å and c ≈ 5.81 Å and there is a drift error about D ≈ 4.365314 10 Å when is compared with the published values, and to examine orthorhombic system by using ASTM data for cadmium sulfide as example the calculated values were found to be a ≈4.169 Å, b ≈ 2.791 Å and c ≈ 5.413 Å, with a drift error about D ≈ 8.28014 10 Å, also the tetragonal system is also examined for beryllium and the calculated values were found to be a ≈ 1.36 Å, b ≈ 1.36 Å, and c ≈ 3.58 Å with a drift error D ≈ 5.743535 10 Å, and the average grain size is also calculated for CdS by using the Scherrer's formula ,the filling factor is determined for Cadmium Sulfide, and the elastic strain by using the Hall - Williamson method for CdS and CdTe

ترميم الصور باستخدام تقنيات محورة غير خطية == Image Restoration Using Adaptive Nonlinear Techniques

Author name: محمد خضير كاظم
Supervisor name: اياد عبد العزيز العاني | صلاح عبد الحميد صالح
General topic: Physics
Specific topic: Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: Image restoration is the process of finding an approximation to thedegradation process and find appropriate inverse process to estimate theoriginal image.An iterative restoration technique(Tikhonov method) was adapted.The adapted filter was designed for restoring RGB satellite images thatare blurred with space - invariant point spread function, Gaussianfunction, and corrupted with additive noise, and salt & pepper noise.Different degradation parameters, i.e. different signal to noise ratio wereconsidered and different noise density.The results using an adaptive filter were compared,quantitatively, with different types of conventional restoration techniques,(such as inverse filter, Least - Squares filter (Wiener Filter), andConstrained Least - Squares filter) using Mean Square Error (MSE).Results show that The Mean Square Error of the restored imagesdecreases with increasing the number of iteration until the resultconvergence. Also the ratio of the MSE of the degraded image to therestored image will increase with decreasing SNR for Gaussian noise,and with increasing noise density for salt and pepper noise respectively,then Results show this method has better performance for restoring thedegraded images, especially for low signal to noise ratio, and for highnoise density.

استخدام تحويل الجيب تمام لتشفير حزمة التحويل المويجي التقريبية == Using Discrete Cosine Transform to Encode Approximation Wavelet Subband

Author name: سارة عدنان محمود
Supervisor name: لؤي ادور جورج
General topic: Physics
Specific topic: Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: Various compression methods have been proposed to achieve high compression ratios and high image qualities in low computation time relatively. In this research work a combined transform coding scheme was proposed, the adopted system utilize both Discrete Cosine Transform and Wavelet transform. The advantages of both transforms were taken into consideration to encode the image. First, the system transform the color components of the image from (RGB) to (YUV), the U and V bands are downsampled due to their poor spatial resolution, and then the wavelet transform is applied on each color band separately. Some spatial coding steps are applied on detail coefficients (like hierarchal uniform quantization, Run Length Encoding (RLE), shift coding) to gain more compression. The approximate coefficients are coded by using (DCT), uniform quantization, shift coding.Also, some analysis tests were done to study the performance of the established system, and the effects of the involved coding parameters on the system were investigated. The test results indicated that the proposed scheme give high compression ratio and good fidelity measures (MSE and PSNR). Moreover, the proposed scheme was found need 0.7 second to compress color images of size (256x256) without making significant degradation in image quality.

التحليل وتطبيق بواسطة الحاسبة للخلية الكهروضوئية في المغير المستمر == A Computer Simulation and Application of PV cell on DC - DC Converter

Author name: زيد سمير جبار السامرائي
Supervisor name: زينب منذر يونس كبة
General topic: Physics
Specific topic: Laser Physics and Electro-optics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: المنظومات الكهروضوئية تولد الكهرباء بواسطة التحويل المباشر للطاقة الشمسية وتعتبر نظام متكامل بسبب كونها مركبة من مجموعة قطع من العناصر. الدراسة النظرية للانظمة الشمسية وتقنيات انشاء موديل لها باستخدام دوائر كهربائية مكافئة كذلك خصائص الخلية الشمسية ستكون مطروقة في هذا البحث. الموديل الجديد للخلية الشمسية سيتم تحقيقه باستخدام برنامج التحليل pspice. الفولتية المثالية كانت 17volt والتيار المثالي كان 4.41A. هذا الموديل سيستخدم في المغير المستمر والذي يمتلك المواصفات التالية، فولتية خرج متغيرمن (1.5V - 12V)، التردد المفتاحي 20kHZ ، دورة الفرض (0.1 - 0.7)، وقدرة الخرج من (1W - 41.6W). المنظومة مصممة ومفحوصة بواسطة برنامج التحليل pspice. تطبيقات موديل الخلية الشمسية والبطارية ستنفذ في المغير المستمر. نتائج التحليل للمغير التي حصلنا عليها من كلا المدخلين اعطت توافق كبير في قيم النتائج. | Photovoltaic system generates electricity by the direct conversion of the sun's energy and it is a modular system because it is built out of several pieces of elements. The theoretical studies of PV and modeling techniques using equivalent electric circuits carried out and the characteristics of PV cell have been investigated. The new model of PV implemented in pspice program, the optimum voltage was (17volt) and optimum current was (4.41Ampere). This model is used in the DC - DC converter which has the following characteristics, the variable output voltage is (1.5V - 12V), switching frequency (20 kHz), duty cycle (0.1 - 0.7) and the output power (1W - 41.6W), the system has been design and tested by pspice program. The application of PV and battery implement in the DC - DC converter, the results of the converter simulation obtained from both two input show a good agreement.

محاكاة عامل التراكم لاشعة الكبح الناتجة من الامتصاص الكلي لاشعة بيتا == Simulation of Buildup Factor for Bremsstrahlung Produced by Complete Absorption of Beta Rays

Author name: ميلاد جذلان علي الانصاري
General topic: Physics
Specific topic: Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: تم تطبيق المحاكاة بطريقة مونتي كارلو لدراسة عامل التراكم لاشعة الكبح المتولدة من الامتصاص الكلي لجسيمات بيتا، حيث لم يسبق دراسته من قبل رغم اهميتها الكبيرة في الدراسات المتعلقة بحساب الجرعة الاشعاعية. حسب عامل تراكم اشعة الكبح لاسماك مختلفة من الماء والكونكريت والالمنيوم والقصدير والرصاص لمصدر السترونتيوم/ اتريوم 90Sr/90Y لانتاج اشعة بيتا بطاقة عظمى مقدارها 2.2 مليون الكترون فولت، وقد تم ذلك من خلال تصميم وتنفيذ برنامج حاسوبي للمحاكاة اطلقنا عليه تسمية "BBF" لتمثيل حلول المسائل التقليدية (الكلاسيكية) لانعكاسات وعبور اشعة الكبح. حيث يتظمن البرنامج دوال لمتابعة حياة او مسيرة الفوتونات نظريا باعتبار نظرية الاحتمالات التي تصف السلوك الحقيقي للفوتونات. في هذا البحث تم دراسة عدد من المعاملات المتعلقة بتصميم البرنامج والمسماة بعوامل المحاكاة وكذلك دراسة المعاملات المتعلقة بمادة الدرع والمسماة بالعوامل الفيزيائية.تم حساب عامل تراكم اشعة الكبح لدرع مفرد ودلت نتائج المحاكاة على ما يلي : • يتزايد عامل التراكم لاشعة الكبح مع زيادة سمك الدرع.• عامل تراكم اشعة الكبح للدروع ذات العدد الذري الواطئ اقل منها في الدروع ذات العدد الذري العالي لنفس طاقة المصدر.• تم استنتاج علاقة شبه تجريبية لعامل تراكم اشعة الكبح كدالة لكل من العدد الذري Z والسمك X لمادة الدرع كالاتي : BBUF = 1 + (a1 Z + a2) X ( a3 Z + a4 ) حيث a4, a3, a2, a1 هي معاملات الملائمة وتعتمد على التوزيع الطاقي لاشعة الكبح. لمصدر كبح السترونتيوم / اتريوم فان قيم هذه المعاملات هي : a1 = 0.0007, a2 = 0.0022, a3 = 0.0072, a4 = 0.4204 | The Monte Carlo simulation method has been applied to generate the first data for bremsstrahlung buildup factor (BBUF) produced by the complete absorption of beta particles in different materials. The bremsstrahlung buildup factor was computed by the present method for different thicknesses of water, concrete, aluminum, tin and lead at the maximum bremsstrahlung energy of 2.2 MeV for 90Sr/90Y beta source. A computer program “BBF” was designed and improved to perform the calculations which solve the classical problem of a gamma ray reflection and transmission, the basic idea of this program is to create a series of life histories of the source particles using random sampling technique to sample the probability laws that describe the real particle’s behaviour, and to trace out the particle’s random walk’ through the medium. The effect of some considered parameters like the simulation parameters and physical parameters were studied. The bremsstrahlung buildup factor has been calculated for single layer shield. The simulation results indicate the following remarks : • The bremsstrahlung buildup factor increases with the increase of thickness of the shield. • The bremsstrahlung buildup factor for low atomic number material is lower than that for a high atomic number material at the same source energy.• The relation between the bremsstrahlung buildup factor BBUF with the atomic number Z and thickness X of the shielding material is suggested to follow the semi - empirical formula : BBUF = 1 + (a1 Z + a2) X (a3 Z + a4)where a1, a2, a3 and a4 are fitting parameters depends on the bremsstrahlung energy distribution. For 90Sr/90Y bremsstrahlung, these parameters are : a1 = 0.0007, a2 = 0.0022, a3 = 0.0072 and a4 = 0.4204

دراسة حاسوبية عن بعض خواص عدسة كابور == A Computational Investigation on Some Properties of a Gabor Lens

Author name: علي اسماعيل محمد السماوي
General topic: Physics
Specific topic: Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: لقد جرت دراسة حاسوبية لبعض خواص عدسة كابور وبمساعدة الحاسوب الشخصي في حالة عدم وجود تاثير لشحنة الفراغ. لقد تركز العمل على تصميم عدستين كهروسكونية ومغناطيسية متحدة المركز. العدسة الكهروسكونية هي عدسة ثنائية الاقطاب مغمورة واقطابها لها شكل اسطواني تفصلهما مسافة .s العدسة المغناطيسية هي عبارة عن ملف يمر به تيار يتكون من عدد من اللفات ذات مجال مستطيل وطول .L ان متغيرات العدسة الكهروسكونية هي النسبة بين الاقطاب والمسافة بينهما, بينما في العدسة المغناطيسية فكانت عدد اللفات - التيار وطول العدسة. العدسة المركبة من العدسة الكهروسكونية والعدسة المغناطيسية (عدسة كابور) تم دراستها عندما تعمل تحت ظروف التكبير الصفر والمالانهائي. تم حل معادلة المسار المحورية بمساعدة توزيع المجال الكهربائي والمغناطيسي المحوري وباستعمال طريقة رنج - كوتا. استعمل المجال المحوري ومشتقتيه الاولى والثانية لحساب الخواص البصرية للعدسة. ان معاملي الزيغ الكروي واللوني تم معايرتها بالنسبة الى البعد البؤري للعدسة ولظروف التكبير الصفري واللانهائي. | A computational investigation has been carried out in some properties of Gabor lens with the aid of personal computer under the absence of space - charge effects. This work has been concentrated on designing two concentric, electrostatic and magnetic lenses. Electrostatic lens is a two - electrode immersion lens whose electrodes are cylindrical in shape separated by a separation distance. Magnetic lens is a number of turns of the current - carrying coil of a hypothetical rectangular field of length L. The variable parameters of the electrostatic lens are the voltage ratio and the separation distance while in the magnetic lens the variable are the Ampere - turn and lens length. The combined electrostatic and magnetic lens (Gabor lens) has been investigated under zero and infinite magnification conditions. The paraxial ray equation has been solved with the aid of the axial electric and magnetic potential distribution using Runge - Kutta method. The axial potential and its first and second derivatives have been used for computing the optical properties of the lens under consideration. The lens spherical and chromatic aberration coefficients have been normalized in term of the focal length under zero and infinite magnification conditions.

تراكيز اليورانيوم في الدم البشري في بعض محافظات العراق باستخدام كاشف الاثر CR - 39 == DETERMINATION OF URANIUM CONCENTRATION IN HUMAN BLOOD SAMPLES IN SOME GOVERNORATES OF IRAQ BY USINGCR - 39 TRACE DETECTOR

Author name: سجى فائز حسن عبد الرسول
Supervisor name: ندى فاضل توفيق
General topic: Physics
Specific topic: Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: هذه الدراسه تم قياس تركيز اليورانيوم وحساب الفعاليه الاشعاعيه النوعيه في الدم البشري(اللوكيميا والاصحاء) الماخوذه من مناطق مختراه لمحافظات القطر وقد استخدمت تقنيه عد اثار شظايا الانشطار النووي الناتج من انشطار نواه اليورانيوم - 235 المقصوفه بالنيوترونات الحراريه من المصدر النيوتروني Am - Be)) بفيض نيوتني 3n.cm - 1.s - 1)10 5 x) وم تحديد تراكيز اليورانيوم بالحسابات المعتمده بالمقارنه مع النماذج البيولوجيه القياسيه والتي تم تحضيرها. ان معدل اعلى تركيز لليورنيوم في الدم كان في محافظه البصره (1.654 ppm) اما اقل معدل تركيز لليورانيوم في الدم كان في محافظه بغداد (0.135 ppm). تم حساب الفعاليه الاشعاعيه النوعيه لنماذج الدم في تلك المناطق وقد بلغت اعلى معدل في محافظه البصره (1.43 x 10 - 1Bq/g) واقل معدل (0.1258 x 10 - 1 Bq/g) في محافظه بغداد وكما تم حساب تركيز اليورانيوم في الدم للمصابين بمرض اللوكيميا وقد كان اعلى تركيز (1.841 ppm) في محافظه المثنى واقل (0.364 ppm) تركيز في محافطه ديالى.اما بالنسبه للفعاليه الاشعاعيه النوعيه فقد كان اعلى قيمه ) 0 - 1 Bq/g 1(1.79 x في محافظه المثنى واقل تركيز) (0.34 x 10 - 1 Bq/g في محافظه ديالى. لقد قورنت نتائج تراكيز اليورانيوم مع الحد المسموح به والمنشور من قبل الوكاله الدوليه للوقايه من الاشعاع (ICRP) وكذلك تم مقارنه نتائج حسابات الفعاليه الاشعاعيه النوعيه لنماذج الدم مع الحد المسموح به والمنشوره من قبل الوكاله الدوليه للطاقه الذريه (IAEA | This study includes measurement of uranium concentration and calculates the specific activity in human blood samples (leukemia and health people) taken from some governorates of Iraq by using fission fragment track technique.The nuclear reaction used as source of uranium fission fragment is U - 235 (n, f), obtained by the bombardment of U - 235 with thermal neutrons from (Am - Be) source which has a flux of (5 x 103 n.cm - 2. s - 1 ) , the concentration values were calculated by comparison with standard biological samples which prepared.The highest rate of uranium concentration in human blood was (1.654 ppm) in Basrah governorate and the lowest rate of uranium concentration in human blood was (0.153 ppm) in Baghdad governorate. And also calculate the specific activity for human blood samples in those regions and found that the highest rate was (1.43 x 10 - 1 Bq/g) in Basrah governorate and the lowest rate was (0.1258 x 10 - 1 Bq/g) in Baghdad governorate.The highest of uranium concentration was (1.841 ppm) for leukemia sample in Al - Muthana governorate and the lowest uranium concentration was (0.364 ppm) in Diyala governorate, and the specific activity was calculated for leukemia samples and found that the highest activity was (1.79 x 10 - 1 Bq/g) in Al - Muthana governorate and the lowest activity was (0.34 x 10 - 1 Bq/g) in Diyala governorate.Uranium concentration results compared with permissible limit who purplish from ICRP agency and the specific activity calculations for human blood samples compared with permissible limit who published from IAEA agency.

دراسة عامل الاستطارة الذرية للاشعة السينية للغلاف K والذرة كاملة للانظمة ذات الثلاث والاربع الكترونات == Studying x - ray atomic scattering form factor for K - shell and total atom for three and four electron system

Author name: رعد عيدان حليوت شنوف الكناني
Supervisor name: خليل هادي احمد البياتي
General topic: Physics
Specific topic: Electronics Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: استخدمت تقنية التجزئة لتحليل انظمة الثلاثة واربعة الكترونات الى ثلاثة ازواج من الدوال الموجية الاكترونية لبعض الايونات المشابهة لذرة الليثيوم وهي (Li, Be+, B++), وستة ازواج من الدوال الموجية الاكترونية لبعض الايونات المشابهة لذرة البيريليوم وهي (Li - , Be, B+) باستخدام دالة الموجة لهارتري فوك (Hartree - Fock ) والمطورة بواسطة كلمنتي وروتي .(Clementi and Roetti)ان هدف البحث هو دراسة عامل الاستطارة الذري للغلاف K والذرة كاملة لانظمة الثلاثة والاربعة الكترونات.تكمن الاهمية الفيزياوية لعامل الاستطارة الذرية في علاقتة بالعديد من الخواص الذرية المهمة مثل شدة الاستطارة المتشاكهة وشدة الاستطارة الكلية ودالة الاستطارة غير المتشاكهة والمقطع العرضي للاستطارة المتشاكهة والمقطع العرضي الكلي للاستطارة غير المتشاكهة وثابت الحجب المغناطيسي والمقطع العرضي التفاضلي لاستطارة الالكترونات بوساطة الذرات وعامل التركيب الهندسي .كما تم دراسة دالة توزيع الكثافة القطرية للجسيم الواحد , بحيث ان عامل الاستطارة الذري هو تحويل فورير (Fourier transform) لكثافة الالكترون ρ(r1) وان , دقة النتائج دققت بواسطة حساب الطاقة الكلية. جميع النتائج حسبت باستخدام الوحدات الذرية | The partitioning technique has been used to analyze the three and four electron systems into three - pairs electronic wave functions for Li - like ions (Li, Be+, B++) and six - pairs electronic wave functions for Be - like ions (Li - , Be, B+) by using Hartree - Fock wave functions of Clementi and Rotti.In this work the atomic scattering factor f(s) for K - shell and total atom for three and four electron systems are studied. The physical importance of this factor appears in its relation with the several important atomic properties such as, the coherent scattering intensity, the total scattering intensity, the incoherent scattering function, the coherent scattering cross section, the total incoherent cross section, the nuclear magnetic shielding constant, the differential cross section of electrons scattering from atom and the geometrical structure factor. Also the one particle radial density distribution function D(r) has been studied, where the atomic scattering factor f(s) is the Fourier transform of the electron density ρ(r1) and . The accuracy of results was checked by determining the total energy. All results are calculated in atomic units.

حسابات نسبيه لبعض خصائص اطياف الذرات المتوسطة والمرتفعة العدد الذري == RELATIVISTIC COMPUTATION OF SOME SPECTROSCOPIC CHARACTERISTICS OF MEDIUM AND HIGH Z - ATOMS

Author name: عدنان يوسف حسين
Supervisor name: Ra’ad A. Radhi
General topic: Physics
Specific topic: Atomic Physics
Degree: Doctorate
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: تم تقديم دراسة منتظمة لطريقة هارتري - فوك غير النسبيه وكذلك نسختها النسبية (ديراك - فوك) لمعدل التوزيع. بالنسبه للطريقة غير النسبية؛ فقد تم اشتقاق معادلات هارتري - فوك وبشكل مفصل واخذ بنظر الاعتبار التصحيح النسبي (تاثير الكتله - السرعه وتاثير دارون وتاثير تفاعل البرم - المداري للاكترون) وقد اعتبر كرتبه اولى للاضطراب. اما بالنسبه للطريقه النسبيه؛ فقد تم اشتقاق معادلات ديراك - فوك واخذ بنظر الاعتبار تاثير تفاعل بريت كتصحيح نسبي للتفاعل الكولومي وقد اعتبر كرتبه اولى للاضطراب. تم تقديم معادلات عناصر المصفوفه لتفاعل بريت (الحد المغناطيسي والحد الارتدادي) لمعدل التوزيع. تم تقديم النتائج لبعض خصائص الذرات في المستوى الارضي(Rb, Zr, Pd, Sn, Cs, Ba, Lu, Ir, Hg, Tl, Bi, Rn ) وتمت مقارنتها بالنتائج العمليه. التاثير النسبي على طاقات الاغلفه الذريه مهم وخصوصا على الاغلفه الداخليه 1s و2s وهذا التاثير يكون محسوسا كلما ارتفع العدد الذري. يكون تاثير بريت حوالي %2 من تاثير التصحيح النسبي (تاثير الكتله - السرعه وتاثير دارون). حسابات هارتري - فوك والتصحيح ال | A systematic study of the non - relativistic Hartree - Fock method and its relativistic version, Dirac - Fock method for the average of configuration have been presented. In the non - relativistic case, a fully derivation of the Hartree - Fock equations were presented and relativistic corrections (mass - velocity, Darwin and spin - orbit terms) are treated as first - order perturbation. For the relativistic case, Dirac - Fock equations were derived, and Breit interaction operator is used as the relativistic correction for the interelectronic Coulomb interaction, and is treated as the first - order perturbation. Expressions for the matrix elements of the Breit interaction operator (magnetic and retardation terms) are given for the average of configuration. Numerical results of some atomic properties for the ground states of (Rb, Zr, Pd, Sn, Cs, Ba, Lu, Ir, Hg, Tl, Bi, Rn ) atoms computed and compared with their corresponding experimental values. The relativistic effect on the orbital energies is important on the inner shells especially for the 1s and 2s shells and this effect becomes more pronounced as Z increases. The contribution of Breit interaction is about 2% of the relativistic shift (mass - velocity and Darwin correction). The Hartree - Fock calculations and relativistic correction gives reasonably good approximation for heavy atoms while Dirac - Fock calculation and Breit interaction gives high precision calculations

تصميم حاسوبي لحزمة ايونية مركزة للمنظومة الليثوغرافية == Computer - Aided - Design Of Focused Ion Beam For a Lithography System

Author name: فاضل عبد العباس علي السهلاني
General topic: Physics
Specific topic: Physics
Degree: Doctorate
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: تم بناء تصميم متكامل بمساعدة الحاســــــــوب وباســـتخدام الطرق الامثلـــــــية لمنظومة بصــــرية ايونيــة ، وذلك بدمــــج طريقة البرمجة الديناميكية مــــــع طريقة تقنية الذكاء الاصطناعى.فقد تم الحصول على معامــــــلات الزيوغ النســـــبية الكروية واللونية اســــــــتنادا الى معامـــل الهــــــيـئة للمنظومات البصرية المثلى ، وحســـــــــب الاتى : ا. تصميم عدســـة مفردة ( كهربائية ومغناطيســــية).ب‌. تصميم منظومة بصرية مكونة من عدســتين كهربائيتين.ت‌. تصميم منظومة بصرية مكونة من ثلاث عدسات كهربائيات.ث‌. تصميم منظومة بصرية مختلطة العدسات (كهربائية ومغناطيســــية).كذلك تم تصميم اربعة انواع من العدسات الكهروستاتيكية مع نموذج لعدســة مغناطيســــية لاصــغر زيوغ بصرية ( المرتبة البصرية الاولى والثالثة) ، حيث تم اعادة بناء الاقطاب الكهربائية والمغناطيسية ثم رسمها لبعدين وثلاث ابعاد ببرنامج المحاكاة (SIMION(7 ، وبالاعتماد على قاعدة البيانات المخزونة (قاعدة المعرفة).هذه العدسات هى كما ياتى : • عدســة احادية الجهد (1) فى نمط التباطىء .• عدســة احادية الجهد (2) فى نمط التعجيل .• عدســة مغمــــورة.• عدســة الحاجــــــز.• عدســة مغناطيســــــية (1). تـــــم تصميم وكتابـــة الحزمة البرمجية بلغة الجافا منظومة الخبير (JESS) والبيســــــــك المرئى النســـــخة السادســـة (VB 6) اســتوديو ، وذلك للتحليل والحصول على حسابات الامثلية الكاملة للمنظومة البصرية الايونية.حيث تم تســمية تلك الحزمة CADION .ايضا تم استخدام توزيع الجهد المحورى الامثل لكلا المجالين الكهروستاتيكى والمغناطيسى ، بالاعتماد على الشـــــروط المحددة لبناء وتركيب العمود البصرى المكون من عدســـتين وثلاث عدسات ومختلط العدسات. تـــم حساب حجم البقعة لقياسات النانومتر وتم الحصول على قيم تقترب الى (3.0) نانومتر المســـــــــتخدمة فى تطبيقات تقنية النانومتر. وكذلك تــم اقتراح تعاريف ومفردات لبصريات الجســـيمات المشــــحونة باعتبار بعض النتائج محققة لعلاقة شـــــــبيهة بمدا اللادقـــــة. | A complete computer aided design (CAD) by using optimization methods for the ion optical systems have been developed, by mixing the dynamic programming procedure and artificial intelligence technique. The relative spherical and chromatic aberrations coefficients were obtained according to figure of merit for the following optimized optical systems : a. Single - lens design (electrostatic and magnetic). b. Two - lens system consists of two electrostatic lenses. c. Three - lens system consists of three electrostatic lenses.d. Multi - lens system (electrostatic and magnetic).Four types of electrostatic lenses and a magnetic lens model were designed as small as possible of optical properties (i.e. the first and third optical properties), and reconstructions of electrodes and pole pieces were plotted in two and three dimensions graphics by using SIMION 7.0 simulator depending on the stored database (i.e. knowledge base).These lenses are as follows : • Unipotential lens 1 (operated in deceleration mode).• Unipotential lens 2 (operated in acceleration mode).• Immersion lens.• Diaphragm lens.• Magnetic lens. Present software has been designed and written in Java expert system shell (JESS) and Visual Basic 6 (VB6) for optimizing and analyzing full calculation processes, it has called CADION package. The optimized axial potential distributions for both electrostatic and magnetic fields according to the constraints have been used in the optical column setup, which are two - lens system, three - lens system and multi - lens system. Spot size measurements were calculated in nano scales, which have values closed to (3.0) nm applicable in nano technology applications used in lithographic systems. Also, the present work has been suggested definitions and abbreviations in charged particle optics to be consider some of the results, as a verification of the uncertainty principle relationship like

كشف اشعة كاما للنويدات المشعة في انسجة بشرية == GAMMA - RAYS DETECTION OF RADIONUCLIDES IN HUMAN TISSUES

Author name: محمد سعد علي
General topic: Physics
Specific topic: Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: وضعت هذه الدراسة لكشف وحساب الفعالية النوعية للنويدات المشعة في الانسجة البشرية المسرطنة التي تم استئصالها من مرضى مدينة بغداد باستخدام تقنية التحليل الطيفي لاشعة كاما بواسطة كاشف التالق ايوديد الصوديوم المطعم بالثاليوم (2×2 انج).استندت الدراسة الحالية على 26 عينة مصابة و8 عينات سليمة لمقارنة النتائج وقد شملت اربعة انواع من الانسجة الطرية (كلية, قولون, ثدي, رحم) والتي يمكن الحصول عليها بكتل كبيرة. اما عملية جمع العينات فقد تم الحصول عليها من قسم الهستوباثولوجي التابع للمختبرات التعليمية لمستشفى مدينة الطب ومستشفى الجراحات التخصصية.اخذت كل عينة بوزن 250 غم, غسلت بالماء المقطر لتخليصها من سائل الفورمالين (المادة الحافظة), قطعت ثم وضعت في وعاء مارنيلي بشكل منتظم, بعد ذلك فحصت بكاشف ايوديد الصوديوم المطعم بالثاليوم لفترة زمنية مقدارها 4 ساعات (14400 ثانية) وفولتية تشغيل مقدارها 530 فولت.قيست كفاءة الكاشف باستخدام مصدر (152 - uΕ) اما اطياف اشعة كاما لعينات النسيج فقد تم معايرتها وفقا لطيف كل من مصدر (137 - sC) و(60 - oC) و(22 - aN). تم رصد 6 نويدات مشعة في العينات المنتخبة حيث توزعت بين 2 - 5 نويدات في كل عينة وقد شملت : نويدتين (214 - Bi, 214 - bP) عائدتين الى سلسلة اليورانيوم؛ نويدتين (228 - Ac, 208 - lT) عائدتين الى سلسلة الثوريوم؛ نويدة صناعية واحدة (137 - sC)؛ والنويدة الطبيعة (40 - K).تراوحت الفعالية النوعية لليورانيوم الملاحظ (نواتج انحلال 238 - U) في العينات المصابة بين (1.02 - 7.46 بكرل/كغم) اما العينات السليمة فقد تراوحت بين (0.88 - 2.02 بكرل/كغم) وقد تراوحت الفعالية النوعية للثوريوم الملاحظ (نواتج انحلال 232 - Th) في العينات المصابة بين (0.59 - 4.84 بكرل/كغم) اما العينات السليمة فقد تراوحت بين (0.49 - 2.71 بكرل/كغم).رصدت نويدة (137 - sC) في جميع العينات المنتخبة بفعالية نوعية تراوحت بين (0.64 - 6.46 بكرل/كغم) في العينات المصابة اما العينات السليمة فقد تراوحت بين (0.5 - 3.46 بكرل/كغم), اما نويدة (40 - K) فقد ظهرت في جميع العينات المنتخبة ايضا لكن بفعالية نوعية اكبر مقارنة بالنويدات الاخرى حيث تراوحت بين (44.18 - 85.36 بكرل/كغم) في العينات المصابة اما العينات السليمة فقد تراوحت بين (40.62 - 56.95 بكرل/كغم). تشير النتائج الى ظهور نفس النويدات على الاغلب في كلا النماذج المصابة والسليمة لنفس النوع من النسيج لكن بفعالية نوعية اقل في النماذج السليمة. | This study is carried out to detect and measure the specific activities of radionuclides in cancerous samples of human tissues that excised from Baghdad city patients. The measurements were done using spectral analysis technique for gamma - ray with 2"×2" NaI(Tl) scintillation detector.Our present investigations are based on the study of 24 abnormal samples and 8 normal samples for comparing the results. These samples include four types of fresh tissues (kidney, colon, breast, and uterus) that may be obtained with great mass. These samples had been collected from the histopathology department for education laboratories in Madenat Al - Ttib and specialized surgical hospital. Each sample is taken with 250g in weight, washed with distilled water to remove the formalin liquid (conservator substance), cut, put in the Marenilli Beaker uniformly and then examined with NaI(Tl) detector for a period of 4 hours (14400s) and 530 V as an operating voltage.Detector efficiency was measured by using Eu - 152 source while gamma - ray spectra for tissues samples had been calibrated with respect to spectra of Cs - 137, Co - 60 and Na - 22 sources.Six radionuclides have been detected in the selected samples where distributed between (2 - 5) radionuclides in each sample. These radionuclides included : two radionuclides (Bi - 214 and Pb - 214) belonging to the uranium series; two radionuclides (Ac - 228 and Tl - 208) belonging to the thorium series; one artificial radionuclide (Cs - 137); and the natural radionuclide (K - 40).The specific activity of detected U - 238 (U - 238 decay products) ranged between (1.02 - 7.46 Bq/kg) in the abnormal samples and (0.88 - 2.01 Bq/kg) in the normal samples while the specific activity of detected Th - 232 (Th - 232 decay products) ranged between (0.59 - 4.84 Bq/kg) in the abnormal samples and (0.49 - 2.71 Bq/kg) in the normal samples.The artificial radionuclide (Cs - 137) is detected in all samples with specific activity ranged between (0.64 - 6.46 Bq/kg) in the abnormal samples and (0.5 - 3.46 Bq/kg) in the normal samples. The natural radionuclide (K - 40) is detected in all samples too, but with largest specific activity compared with other radionuclides where it ranged between (44.18 - 85.36 Bq/kg) in the abnormal samples and (40.62 - 56.95 Bq/kg) in the normal samples. The results indicate that same radionuclides are often appeared in both normal and abnormal samples for the same type of tissue but with least specific activities in the normal samples.

دراسة تحضير مادة كاؤلين دويخله كمالات في صناعة الورق == A STUDY OF USING KAOLIN DUEKHLA AS FILLER IN THE PAPER INDUSTRY

Author name: علي رزاق عبد الرضا
Supervisor name: ازهار جواد داوود
General topic: Physics
Specific topic: Solid State and Materials Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: يتناول البحث دراسة تاثير خفض نسبة اكاسيد الحديد والتيتانيوم السيليكا الحرة من اطيان كاؤولين دويخله لغرض استخدامها كمالات في صناعه حشوه الورق.لما لهذه المكونات من تاثير على خواص الحشوه. يحتوي خام الكاؤولين المستخدم في هذا البحث على حوالي 1.7% من اوكسيد الحديد و1.2% من اكسيد التيتانيوم و51.16% من اوكسيد السيلكون من ضمنه12% من السيليكا الحرة. ويعتبر وجود هذه النسب من اوكسيد الحديد والتيتانيوم والسيليكا الحره ضمن الخام غير مرغوب في صناعة الورق , لقد اجريت معامله كيميائية لكاؤولين دويخله بهدف تنقيته من الشوائب التي يمكن ان تذوب بحامض الهيدروكلوريك حيث ثم الاستمرار بغسل الكاؤولين بالماء المقطر لتصل درجةpH الى قيمة خمسة . ثم تجفيفه لمدة 3 ساعات بدرجة حرارة من (40 - 60) م0 وبعدها تم طحن المسحوق بالمطحنة البورسلينيه لمدة 5 ساعات. ثم نخل المسحوق بمنخل ذو حجم حبيبي 65 مايكرون ليتم استخدامه في الدراسة. استخدمت في هذا البحث طريقة الترسيب, وقد اعتمد في طريقة الترسيب على فصل الاكاسيد المذ كوره من الاطيان استخدام ماده مشتته هي فوسفات الصوديوم. كما تم دراسة تاثير الماده المشتتة على لزوجة الخليط حيث تبين ان بزيادة الماده المشتته تقل نسبه اللزوجة الى ان تصل الى اقل قيمه. كما تم دراسة تاثير كبريتات الخارصين المائية كماده قاصرة على نموذج المجموعه M4 وباوزان تراوحت( بين10 الى 22 غم) من الماده القاصرة كخطوه ثانيه لتقليل نسبه الشوائب المذكورة والتي بالنتيجة تؤدي الى زيادة نصوعيه كاؤولين دويخله حيث تم ازالة حوالي 73% من اوكسيد الحديد,91% من اكسيد التيتانيوم, 15% من اوكسيد السيلكون, و50% من السيليكا الحرة في نموذج المجموعه G7. النتائج المستحصله تبين كفاءة هذه الطريقة في فصل الشوائب الغير مرغوب فيها اذ انخفضت نسبة اوكسيد الحديد المتبقي في الماده المعالجه (من 1.71% الى0.3%), واكسيد التيتانيوم ( من1.2% الى 0.09%), واوكسيد السيلكون (من 51.16% الى 39.7%). وكون الطريقة المتبعه في الفصل هي طريقة فيزيائيه فلم يلحظ حدوث تغير في خواص الخام بعد المعالجه, مما يمكنا استخدام الخام المعالج بهذه الطريقه في صناعات اخرى. | This study is carried out to investigate the possibility of using Iraqi clay; Duekhla kaolin as filler in the paper industry by reducing the percentage of iron oxide, titanium dioxide, and free silica. Duekhla Kaolin containe about 1.7% iron oxide, 1.2% titanium dioxide, 51.16% silicon dioxide, and 12% free silica. The existence of these oxides in kaolin is undesired in paper - making. The process started by washing Duekhla kaolin with (4N) HCl to remove all the soluble oxides which are not required in paper making. The washed kaolin then separated using filter papers and under a sequence of operations of dilution and filtering until the pH - value become 5. The separated materials then dried at temperature range 40 - 60 °C for 3 hours, and the dried powders then milled using ball mill of porcelain body, with different sizes of spheres, for 5 hours. Finally the powders of Duekhla Kaolin sieved with a sieve of 65 μm. The sedimentation method is used for the separation of the above mentioned oxides from clay by using sodium phosphate as dispersant agent. The viscosity parameter of the mixture was studied under the effect of the dispersant agent, and it was found that with the increasing of added dispersant agent the viscosity decreased to a minimum value which is equal to 0.31dyne.cm2/sec, after that the viscosity increased with the increasing of adding sodium phosphate. The study performed; depending on the minimum viscosity value corresponds to the dispersant amount added. The zinc hydrosulfite was used as a bleaching agent in a second step for removing the undesired impurities which implies to raise the brightness degree of kaolin Duekhla as a result. As a result of these treatment, the undesired oxides are reduced from sample G7 by the following percentages; (73% of iron oxide, 91% of titanium dioxide, 15% of silicon dioxide, and 50% of free silica removed), the results of this study reveals that the oxides percentages decreased from (1.71% to 0.3% in iron oxide, 1.2% to 0.09% in titanium dioxide, and 51.16% to 39.7% in silicon dioxide). The crystal structure of kaolin did not change after these treatments to decrease the percents of impurities in this clay to be used as filler in the paper industry

مسار الالكترون داخل المموج اللولبي لليزر الكترون الحر == The Trajectory of Electron in Free Electron Laser Helical Undulator

Author name: زينة محمود الداغستاني
Supervisor name: محمد عز الدين الصندوق
General topic: Physics
Specific topic: Laser Physics and Electro-optics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: نظرية البعد الواحد استخدمت لدراسة اداء مكبر ليزر الالكترون الحر عندما تملك حزمة الالكترونات توزيع منتظم للكثافة في مسار عمودي على محور المموج اللولبي مع اطوار ابتدائية منتظمة توزع بين فترة (0 - 2π ). لقد تم استخدم برنامج matlab 6.1 في بناء برامج الدراسة.في هذا العمل تمت دراسة لحركة الالكترون داخل المموج اللولبي واستنادا الى معادلات الحركة للالكترون فقد تم التركيز على العوامل الثلاثة التالية : 1 - المجال المغناطيسي2 - فترة المموج3 - عامل لورنتز حيث ان الزيادة في المجال المغناطيسي تؤدي الى الزيادة في نصف قطرمسار الالكترون وكمية السرعة المستعرضة للالكترون وبنفس الوقت تؤدي الى النقصان في كمية السرعة الطولية للالكترون. اما في حالة فترة المموج نلالحظ تكرار الظواهر اعلاه في حالة المجال المغناطيسي مع اختلاف السلوك الموجي للالكترون بسبب اختلاف المعادلات المستخدمة فى هذه الحالة.واخيرا الحالة الثالثة فان الزيادة في عامل لورنتز تؤدي الى النقصان في نصف قطرمسار الالكترون وكمية السرعة المستعرضة للالكترون وفي نفس الوقت تؤدي الى الزيادة في كمية السرعة الطولية للالكترون.الظواهر السابقة تمت مناقشتها حسب قانون حفظ الطاقة داخل المموج اللولبي. كذلك تمت المناقشة لدراسة تاثير طور الالكترون, المجال المغناطيسي للمموج وفترة المموج بوجود المجال الكهربائي للموجة الكهرومغناطيسة الداخلة( مثل موجة الليزر المراد تكبيرها) على كمية واتجاه السرعة الطولية للالكترون. حيث وجد ان هنالك زيادة في كمية السرعة الطولية للالكترون تحت تاثير نفس العوامل سواء ان كان مجال مغناطيسي او فترة المموج في هذه الحالة مقارنة مع الحالة الاولى التى تكون بغياب المجال الكهربائي. | The One - dimension theory is applied to study the performance of free electron laser amplifier when the electron beam have a uniform density distribution in the direction perpendicular to the helical undulator axis with initial phases uniformly distributed along the interval (0 - 2π). The matlab 6.1 program is used to built the computer programs that used in this work. In the present work, the motion of electron are considered inside the helical undulator. The equations of motion for electron inside the undulator, show that three effecting parameters, they are : 1 - Undulator magnetic field2 - Undulator period3 - Lorentz factorThe increase in undulator magnetic field leads to increase in the radius of electron trajectory, and the magnitude of transverse electron velocity and at same time leads to decreasing the magnitude of the longitudinal electron velocity.The above effects of undulator magnetic field be reapted in the case of undulator period. Owing to the differences in the equations that used in this case, it is found differences in waves behavior of electron.At last, the increase in Lorentz factor leads to decreasing in the radius of electron trajectory and magnitude of transverse electron velocity and also causes an increasing in magnitude of the longitudinal electron velocity.The effects above discussed as a result of the law of the conservation of energy inside the undulator.The motion of electron is also considered under the effect of the presence of electric field that may be as an electrical component of electromagnetic wave (laser). As comparing with first case (when there is no electric field), there are increasing in the magnitude of longitudinal electron velocity and a variation in electron energy. Within this case, the effect of the phase of electron, undulator magnetic field and undulator period are studied

تصميم وتحليل العدسه الشيئيه رباعية العناصر للمدى الطيفي (mµ 3.2 - 4.2) == DESIGN AND ANALYSIS OF THE FOUR ELEMENTS OBJECTIVE LENS FOR THE 3.2 - 4.2µm SPECTRAL REGION

Author name: صفاء عبد الستار عودة القيسي
General topic: Physics
Specific topic: Nuclear and Environmental Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: اجري بحث حاسوبي لتصميم منظومه بصريه باربع عدسات شيئيه باستخدام برنامج ZEMAX وكذلك دراسة ملائمة بعض المواد(Si, Ge, AMTIR - 1, KRS - 5, ZnSe) التي تعمل ضمن منطقة الاشعه تحت الحمراء (3.2 - 4.2 μm) لعناصر المنظومه البصريه المصممه. اجريت عملية تحقيق الامثليه لايجاد بعض الخصائص البصريه والموصفات التصحيحيه الاكثر تفضيلا من حيث نمط الحيود وحجم البقعه الصوريه الناتجه وكذلك حجم وشكل المنظومه. ان النتائج الحاسوبيه التي تم الحصول عليهابواسطة برنامج ZEMAX اظهرت امكانية استخدام المواد المذكوره ضمن حدود صفاتها البصريه المتمثله بالابعاد البؤريه والزيوغ الكروي وتوزيع الشده والطاقه نسبة للمنظومه والصور المتكونه عند منطقة التحسس. تم اجراء مقارنه للنتائج مع التي حسبت بواسطة برنامج Visual Basic وظهر توافقا عاليا بينهما. ان مواصفات الانظمه البصريه التي قدمت في البحث الحالي قابل للتنفيذ عمليا. | A computational investigation in the present work has been used to design optical system (Four Elements Objective Lens) to show the suitability of some infrared materials (Si, Ge, AMTIR1, KRS - 5, and ZnSe) for the elements of optical designs with aid of ZEMAX package. Optimization process using merit function has been conducted to determine the must favorable optical properties (diffraction, aberration, size of spot, and size and shape of the system). Such designs have been operated in the middle infrared region of spectrum 3.2 - 4.2 μm. The computations obtained by the ZEMAX package shows the performance of those infrared materials through the parameters, focal length, back focal length, f - number, numerical aperture, field of view, Seidel sum for spherical aberration, intensity distribution and fraction encircled energy of the systems and images projected in the detection area. The results have been compared with those obtained with aid of Visual Basic program where a high degree of agreement has been found. The specifications of the optical systems that have been put forward in present investigation can be practically realized

دراسة ثابت الحجب النووي المغناطيسي للعدد الذري من 2 الى 10 == A Study for Nuclear Magnetic Shielding Constant for Z = 2 to 10

Author name: وسام احمد امين المشهداني
Supervisor name: خليل هادي البياتي
General topic: Physics
Specific topic: Physics
Degree: Master
University: Al-Nahrain University - College Of Science
Language: English
University location: Baghdad
First pages:

تاثير اعادة الاعتيان والتكميم على ضغط البيانات الصوتية الرقمية == Effect of Resampling and Requantization on the Compression of Digital Audio Data

Author name: شيرين عبد القادر مهدي السامرائي
Supervisor name: لؤي ادور جورج | ليث عبد العزيز العاني
General topic: Physics
Specific topic: Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: ان دراسة اعادة الاعتيان والتكميم للبيانات الصوتية الرقمية تعتبر من المواضيع المهمة حيث تستخدم لاغراض ضغط البيانات.في هذا البحث تم دراسة بعض طرق اعادة الاعتيان بواسطة تقليل عدد العينات مع الحفاظ على نوعية الصوت. ومن هذه الطرق المدروسة : Linear, Lagrange , Cubic Spline , quadratic, and Bezier’’وتم بحث معدل تقليل العينات بواسطة حذف جزء كبير من العينات ومن ثم اعادة العينات التي تم حذفها بواسطة طرق الاستكمال التي تم الاشارة اليها وتم تحديد درجة كفاءة كل طريقة من الطرق المدروسة باستخدام مقاييس معيارية منها نسبة تقييس الاشارة العظمى الى الضوضاء (Peak Signal to Noise Ratio)واثبتت طرق النتائج . كذلك تم في هذا البحث دراسة اعادة التكميم بواسطة الطريقة المتجانسة وغير المتجانسة وتم دراسة مراحل التكميم لكل طريقة مع الحفاظ على نوعية الصوت وكانت نتائج التكميم للطريقة المتجانسة افضل من الطريقة الغير متجانسة.بالاضافة الى ذلك فقد تم اختبار النتائج سمعيا وكانت عينة المستمعين من خلفيات مختلفة وتم استنتاج انه كلمزااد معدل تقليل البيانات ومراحل التكميم سوف تقل نوعية الصوت. | The study of the resampling and requantization methods of digital audio data is one of the major assets project. Which these methods used to compression the audio data. In this search the application of some resampling methods on the audio signal was investigated by reducing the number of samples while the audio quality is maintained. The considered resampling methods are the Linear, Quadratic, Cubic spline, Lagrange and Bezierand for each method the level of sampling reduction was investigated by applying the down sampling rate using and then up sampling using the above mentioned interpolation method. The efficiency of each method under consideration will be determined with the aid of quality criteria like peak signal to noise ratio (PSNR). The Lagrange, Cubic spline, and Beizer interpolation methods provided have the same results and good quality. Also in this search the results of applying the uniform and non - uniform quantization methods are presented the effect of the quantization steps on the audio quality investigated. The results proved the uniform quantization method is better than non - uniform quantization method.A listening test was used to prove the efficiency of each method, the test sample has different backgrounds and they prove when the decimation rate and the step of quantization increase the audio quality will be decrease

ترميم الصور الرقمية باستخدام خوارزمية المرشح التكراري == Restoration of Digital Images Using an Iterative Tikhonov - Miller Filter

Author name: هاله كاظم حسن
Supervisor name: اياد عبد العزيز العاني
General topic: Physics
Specific topic: Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: لقد تم تطبيق المعالجات الصورية في العديد من المجالات العلمية كعلوم الفيزياء والحاسوب والهندسة والكيمياء والبيولوجيا والطب. من المعروف ان عملية الحصول على الصورة باستخدام الطرق البصرية او الالكترونية والتي عادة ما تكون معرضة للتشويه من قبل بيئة المتحسس. مجال ترميم الصورة هو احدى مجالات معالجة الصورة الرقمية الذي يهتم بتحسين الصورة المشوهة. ترميم الصورة ممكن ان يكون خطي او غير خطي واعمى او غير اعمى. تم التركيز في هذا البحث على ترميم الصور الخطي والغير اعمى وفرض ان موديل تشوية الصورة هو عبارة عن التفاف داله الغشاوة بالصورة الاصلية واتلفت باضافة ضوضاء جمعية وان خوارزمية ترميم الصورة هي محاولة للتخلص من داله الغشاوة والضوضاء من الصورة المشوهة بفك التفاف دالة التشويه بالصورة المشوهة وتقليل الضوضاء لانتاج صورة مقدرة قريبة من الصورة الاصلية . الصور المستخدمة شوهت بواسطة دالة غشاوة كاوسية مختلفة الانحراف المعياري σ =1,2 وضوضاء كاوسية جمعية مختلفة بنسبة الاشارة الى الضوضاء SNR= 5,10, 20. التشوية استخدم لعدة انواع من الصور وهي الصورة الرمادية (صورة الستلايت )وصورة السونار (صورة الجنين) والصورة الملونة (صورة الطائر). وينر فلتر وفلتر ميلر - تكنهوف التكراري استخدمت لترميم الصور المشوهة. بواسطة مقياس جذر معدل مربع الخطاء لقد استنتجنا ان افضل اداء لوينر فلتر هو عندما يكون التشويه عالي اي ان نسبة الاشارة الى الضوضاء قليلة وافضل اداء لميلر - تكنهوف التكراري هو عندما يكون التشويه قليل اي ان نسبة الاشارة الى الضوضاء عالية. | Digital images are applied in various fields such us : physics, computer, engineering, chemistry, biology and medication sciences. It have been known that any images acquired by optical or electronic means is likely to be degraded by the sensing environment. Image restoration, is one of digital image processing field, which is care about improving the degraded image. Image restoration may be linear or non - linear and blind or non - blind. The following research focusing on linear non - blind image restoration and assuming that the degradation model as a convolution of the original image with blurring function and distorded by additive noise. Image restoration algorithms are trying to "undo" the blurring function and the noise from the degraded image by deconvolving the blurring function and reducing the noise from the degraded image to produce an estimate image, which it approach to the original image. The image have been used, blurred by Gaussian blurring function with selected standard deviation values σ = 1,2 and degraded by additive Gaussian noise with selected signal to noise ratio values SNR= 5, 10 and 20. The degradation have been used for three type of images, these are gray image (Satellite image), sonar image (Embryo image) and color image (bird image). Iterative Tikhonov - Miller filter and Wiener filter have been used to restore the degraded images. Using Root Mean Square Error (RMSE) measuring it have been concluded that, Iterative Tikhonov - Miller filter has better performance for less degradation parameters, with high SNR and Wiener filter has better performance for more degradation parameters, with low SNR.

دراسة الخصائص الطيفية لسلاسل نظائر نوى الهافنيوم والتنكستن باستخدام IBM وIBFM == Study of Spectroscopic Properties in Isotopic Chain of Hf and W Nuclei Using IBM and IBFM

Author name: عمار عبد الستار زغير الراوي
Supervisor name: سعد ناجي عبود | ليث عبد العزيز العاني
General topic: Physics
Specific topic: Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: تم استخدام نموذج البوزونات المتفاعلة IBM لدراسة التركيب النووي لنظائر الهافنيوم 172 - 180Hf والتنكستن 180 - 190W حيث تم تحديد قيم معلمات معادلة الطاقة الهاملتونية H في نموذج البوزونات المتفاعة الاول IBM - 1 ونموذج البوزونات المتفاعة الثاني IBM - 2 لكل نظير من نظائر الهافنيوم والتنكستن عن طريق المواؤمة (fitting) مع مستويات الطاقة التجريبية المتوفرة. وكذلك تم استخدام هذه المعلمات لكل نظير لدراسة الانتقالات الكهربائية رباعية القطب B(E2) والانتقالات ثنائية القطب المغناطيسي B(M1) والعزوم رباعية القطب الكهربائي للمستويات المتهيجة الاولى Q(2_1^+) والثانية Q(2_2^+) وكذلك نسب الخلط بين الانتقالات الكهرومغناطيسية (E2/M1) والانتقالات احادية القطب الكهربائية B(E0) بالاضافة الى دراسة الازاحات الايزوميرية وازاحة النظائر، وتمت مقارنة النتائج النظرية (بنتائج IBM - 1 وIBM - 2 ) مع القيم العملية المتوفرة وكان هناك توافق جيد بينهما. تم دراسة المستويات المزدوجة التناظر ذات البرم العالي في IBM - 2 بالنسبة لتفاعل ماجيرونا ومنها مستويات ايريست ومستويات ايرير، حيث هذه المستويات تتميز بانها ذات طاقة عالية وE2 ضعيف مع انتقال M1 قوي مع تحديد البرمF (F - Spin) لكل مستوي.المستويات هي المستويات المزدوجة التناظر في نظائر Hf وW وهي المستويات التي تتميز بانها مستويات ذات فونون واحد او فونونين في سلاسل النظائر ذات الشكل γ - softالتي لها اعداد نيوترونية N قريبة من العدد السحري 82 باتجاه النظائر المشوهه نحو منصف القشرة.تم مناقشة مستويات الطاقة B(E2)، B(M1) والمستويات المزدوجة التناظر وتاثير عوامل ماجيرونا على مستويات الطاقة المتهيجة العليا لنظائر 180 - 190W باستخدام IBM - 2. وكان لتغير هذه العوامل تاثير كبير على خواص المستويات المزدوجة التناظر، تم مقارنة جميع النتائج التي حصلنا عليها مع القيم العملية المتوفرة وحصلنا على مقاربة جيدة.حيث وجد ان المستوي في 180W و182W هو اول مستوي مزدوج التناظر بينما في184W و186W هو اول المستويات المزدوجة التناظر في هاتين النواتين. تم حساب خصائص B(M1) ونسب الخلط وكذلك العوامل g - factors وM1 strength للنوى الزوجية للتنكستن 180 - 188W باستخدام IBM - 2.نظائر الهافنيوم (Z=72) تقع في المنطقة المشوهه بينما نظائر التنكستن (Z = 74) تقع في المنطقة الانتقالية باتجاه المنطقة المشوهة العليا. نسبة الخلط E2/Ml لبعض الانتقالات في نظائر172 - 180Hf و180 - 188Wتم حسابها لمستويات الطاقة المنخفضة الموقع وكذلك المستويات العليا (المزدوج التنافر) ومن قيم نسبة الخلط بعضها مقارب للبعض الاخر ومختلف عن القيم العملية بالاشارة وهي حساسة لقيم M1. وهنا تم الاعتماد على طرق جديدة في حساب الشحنات المؤثرة للبوزونات (e_π,e_v )وذلك لغرض استخدامها في حساب الانتقالات الكهربائية رباعية القطب. وكذلك الاعتماد على طرق جديدة وحديثة باتخاذ g - factor لحساب الانتقالات المغناطيسية M1.تم حساب طاقة فصل بوزترون من نوع نيوترون بالاعتماد على برامج متقدمة وجديدة ضمن برنامج NPBOS وكذلك حساب نسبة التفرع X(E0/E2) لكلا السلسلتين.الجزء الاخر من الدراسة تم تحليل مستويات الطاقة الموجبة ومستويات الطاقة السالبة لنظائر الهافينيوم والتنكستن الزوجية الفردية باستخدام نموذجي تفاعل البوزون - الفيرميون الاول(IBFM - 1) والثاني (IBFM - 2)، حيث تم ايجاد مستويات او مدارات الجسم المنفرد ذات التناظر السالب والموجب . وهنا تم استخدام برنامج ODDA وبرنامج PBEFM لحساب مستويات الطاقة والانتقالات الكهرومغناطيسية ونسب الخلط بينهما وتمت مقارنة النتائج النظرية مع القيم العملية المتوفرة.وكذلك تم اعتماد طرق جديدة في حساب الشحنة الفعالة للفرميون (e_F ) وكذلك حساب العامل الجيرومغناطيسي للفيرميون (g_F ) والذين استخدمناهما في دراسة الانتقالات الكهرومغناطيسية في نوى الهافنيوم والتنكستن الزوجية والفردية باستخدام (IBFM) | The interacting boson model (IBM) has been used to make a schematic study of (172 - 180Hf and 180 - 190W) isotopes. For each isotope of Hafnium and Tungsten determined the values of the parameters in the Hamiltonian of IBM - 1 and IBM - 2, which satisfied the best fit to the experimental data for energy levels. Beside on these values, can extrapolate to isotopes are extrapolated for which no experimental data founded and can make predictions for future experiments. We obtain the electromagnetic transition probability B (E2) and B (M1) by using the same values of these parameters for each isotope to, quadrupole moments for first and second excited states, mixing ratios and monopole transition probabilities B (E0), isomer and isotopic shifts and two neutron boson separation energy. Where our results had good agreement with the experimental data in general, although more experimental data we needed for the nuclear properties. The long range goal is to understand the origin of the IBM - 1 and IBM - 2 parameters in terms of a microscopic theory, such as nuclear shell and Nillson models. Results of schematic calculations are presented in various terms of F - spin symmetry in the Hamiltonian of the IBM - 2. Specific attention is paid to the effect of F - spin symmetry breaking on gamma to ground and gamma to gamma M1 transition in deformed nuclei. A comparison with available magnetic dipole moment transition probability M1 data in deformed nuclei is presented. The constraints implicit by these data on the form of IBM - 2 Hamiltonian in deformed nuclei are discussed. Mixed symmetry states are also studied. It is found that some of the mixed symmetry states with moderate high spins change very fast with respect to Majorana interaction. Under known conditions, they become the yrast state or yrare state. These states are difficult to decay and become very stable. This study suggests that a possible new mode of isomers may exist due to the special nature in their proton and neutron degrees of freedom for these isotopes. The mixed - symmetry and states or at least a fragment of it, have been identified in Hf and W isotopes. This enable us to trace the evolution of the one - phonon and two - phonon states in the even - even Hafnium and Tungsten isotopic chain from the γ - soft nuclei near N = 82 to the deformed nuclei towards mid - shell. In 180 - 190W isotopes, energy levels, B (E2), B (M1) and mixed symmetry states (MSS) have been discussed using IBM - 2. The effects of the Majorana parameters on the energy of the highly excited state have been investigated. The variation of these parameters has a great effect on the properties of MSS. All the calculated results were compared to the available experimental data and a reasonable agreement was achieved. It is found that the in 180W and 182W are the first 2+ mixed symmetry states, while the in 184W and 186W are the first 2+ mixed symmetry states. The B (M1) properties of even 180 - 188W isotopes are investigated in the IBM - 2. The (E2/M1) mixing ratios, g - factors, and summed M1 strength are calculated. A least - squares fit of the excitation energies is used to fix the IBM - 1 projected Hamiltonian parameters, while the F - spin - breaking terms are adjusted to reproduce the M1 properties of low - lying states. The influence of F - spin mixing on the summed M1 strength is studied using the coherent state technique in perturbation theory. The M1 properties of the low - lying states are described satisfactorily when the standard boson g factors are used, but the summed M1 strengths are found to be larger than the present experimental values. Possible g factor adjustment, which reconciles the calculated and experimental M1 strength, is discussed. The Hafnium (Z=72) lies in the deformed region and tungsten isotopes (Z = 74) lie in the transitional region that occurs at the upper limit of the range of the deformed nuclei. The - ray E2/Ml mixing ratios for the selected transitions in 172 - 180Hf and 180 - 188W are calculated in the IBM - 2. The Majorana parameters are found to have a great effect on the energy of mixed - symmetry states as well as on the sign and magnitude of the E2/M1 mixing ratios of transitions between regular (symmetric) states. The results demonstrate the sensitivity of the sign and magnitude of values on particular IBM - 2 parameters. In this study, analyzed the positive and negative parity states of odd Hf and W isotopes within framework IBFM - 1 and IBFM - 2. The results of an IBFM - 1 and IBFM - 2 multilevel calculations of and , single particle orbit are reported for the positive and negative parity states of the odd atomic mass number, A, Hf and W isotopes. Also, an IBM - 1 and IBM - 2 calculation by using ODDA and PBEFM programs is presented for the low - lying states in the even - even 170 - 180Hf and 180 - 190W core nucleus. The energy levels, B (E2) and B (M1) transition probabilities and mixing ratios are calculated and compared to the available experimental data. We found that the calculated positive and negative parity low spin state energy spectra of the odd - A 171 - 179Hf and 181 - 187W isotopes agree quite well with the experimental data.

تخمين الجرعة الاشعاعية للاشعة المؤينة وفوق البنفسجية باستخدام كواشف الاثر النووي == Radiation Dose Assessment for Ionizing and Ultraviolet Radiations Using CR - 39 , Lexan and LR - 115 Nuclear Track Detectors

Author name: فلا حاتم طه
Supervisor name: حسين علي الجبوري
General topic: Physics
Specific topic: Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: The aim of this study is the radiation dose assessment of gamma rays - γ and ultraviolet - UV radiation on nuclear track detector - NTDs types CR - 39 , Lexan and LR - 115 through measuring the absorbance - A by using uv - visible spectroscopy technique and measuring the spectral deviation of Fourier transform infrared - FTIR technique .The radiation response for gamma rays was measured at low dose range 1Gy to 10 Gy and high dose range 10 Gy to 195 kGy .There is gamma ray response for all NTDs used in this study . Results revealed gamma radiation response at low and high radiation doses for Lexan and LR - 115 detector using optical absorbance - A ,while the radiation response for CR - 39 detector appears only at high dose range .The results show that absorbance - A increases with increasing of gamma radiation dose, where it was observed that Lexan detector has a radiation response much better than CR - 39 and LR - 115 detectors through measuring increasing in the absorbance - A value at the wavelength 800 nm . There is deviation in some of wavenumbers - W of FTIR spectrum measured for CR - 39 detector. This deviation appears at low dose range from 1Gy to 10 Gy with increasing of gamma radiation dose at wavenumbers - W 1405 and 1456 cmˉ ˡ , while the deviation does not appear in Lexan and LR - 115 detectors .Also, for uv - irradiation there is an increase in absorbance - A with uv - irradiation in dose at the range from 1 J/cm² to 360J/cm² . LR - 115 detector has uv - radiation response better than CR - 39 and Lexan detectors through measuring the increasing in absorbance - A at the wavelength 650 nm.The deviation in FTIR spectrum caused by uv - irradiation appears at the wavenumbers - W 1338 , 940 and 2907 cmˉˡ for CR - 39 , Lexan and LR - 115 detector respectively. The deviation in CR - 39 and Lexan detectors is more clear than in LR - 115 detector.From the results of this study , a possibility appears for the case of NTDs type CR - 39 , Lexan and LR - 115 as gamma and uv radiation dosimeters in medical and environmental fields.List of

تطور التركيب في نوى الباريوم الزوجية - الزوجية باستخدام نموذج البوزونات المتفاعلة == Structure Evolution in the even - even Ba nuclei with IBM

Author name: غفران عبد علي
Supervisor name: سعد ناجي عبود
General topic: Physics
Specific topic: Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: The nuclear structure and electromagnetic transitions of even - even neutronrich 120 - 148Ba isotopes was studied in the framework of the collective models Interacting Boson Model (IBM - 1 and IBM - 2) and Dynamic Deformation Model (DDM). The reduced transition probabilities B(E2), B(M1), monopole matrix element  (E0) , mixing ratio  (E2/M1) and X(E0/ E2) of these isotopes was calculated. A set of parameters was used in the calculation to approach the values with the measured data. It was pointed out that Interacting Boson Model (IBM - 1 and IBM - 2) are equitably reliable for the description of spectra and other nuclear properties. It was found that there is a rapid transition between spherical and rotational shapes. In this work, we depend on new methods to evaluate the effective charges for proton and neutron boson ( )  e and ( )  e , and new method to calculate the gyromagnetic ratio for proton boson ( )  g and ( )  g .Mixed symmetry states are also studied. It is found that some of the mixed symmetry states with moderate high spins change very fast with respect to the Majorana interaction. Under certain conditions, they become the yrast state or yrare state. These states are difficult to decay and become very stable. This study suggests that a possible new mode of isomers may exist due to the special nature in their proton and neutron degrees of freedom for these isotopes. The mixed - symmetry 2 , 3  2 , 4    1 3 and 1 ,  states or at least a fragment of it have been identified in Ba isotopes. This enables us to trace the evolution of the onephonon and two - phonon states in the even - even barium isotopic chain from the γ - soft nuclei near N = 82 to the deformed nuclei towards mid - shell. The Dynamic Deformation Model (DDM) of Kumar and Baranger is employed for studying variations of the nuclear structure of light 120 - 140Ba isotopes. The potential energy surface parameters have been calculated and the low - lyingn levels spectrum is predicted along with the static and transition E2 moments.Comparison with experiment data and with other theories supports the validity of our treatment.The recent developments of the dynamic deformation model (DDM) make it readily applicable to a wide range of nuclei in periodic table. We study of the even - mass barium isotopes from N= 64 to the closed neutron shell at N= 84. Within this region there is experimental evidence for nuclei with the characteristics of vibrational, rotational or  soft level sequences. We show that the DDM model is well able to account for these features as typified by energy levels, electric quadrupole moments and gamma transition probabilities across this region when the only parameter which changes is the neutron number. For comparison the experimental data were also fitted to IBM - 2 and the results from these fits are in general in good agreement with those from the DDM.Supervisor Certification We certify that this thesis entitled ''Structure Evolution in the even - even Ba nuclei with IBM'' was prepared under our supervision at the University of Al - Nahrain Collage of Science Department of Physics, in partial fulfillment of the requirements for the degree of Master of science in physics.

تحضير المركباث الجديدة Sn - 1223 وCu - 1223 الفائقت التوصيل العالي من Hg - 1223 == Preparation of Novel High Temperature Superconductor Compounds (Cu - 1223 and Sn - 1223) From Hg - 1223

Author name: اسراء ماهر جمال
Supervisor name: عماد خضير الشكرجي
General topic: Physics
Specific topic: Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: The main problem is the replacing of Hg atom by covalent atoms such as(Cu,Sn) atoms in the compound ((H )B C C ) by consider (x=0 - 1). Firstly, the high temperature superconductor of (HgB C C ) Hg - 1223 had been synthesized experimentally by solid state reaction. The high temperature superconductor (CuB C C ) Cu - 1223, (SnB C C ) Sn - 1223 had been synthesized by solid state reaction.There are many parameters affected the preparation technique such as flow of oxygen, sintering temperature and compacted pressure. The ceramic samplesof((HgB C C ),(CuB C C ) and (SnB C C ) was analyzed by XRD technique to show the phase of Hg - 1223. The XRD - pattern exhibited the presence of Hg - 1223, Cu - 1223 and Sn - 1223 like tetragonal phase incomparable with the ASTM data sheet.The analysis of XRD - pattern showed that the high phase Hg - 1223 was predominated in the crystal structure of all compound (CuB C C ) and (SnB C C ). The XRD - pattern with the aid of a computer software to determine the lattice parameters. The lattice parameters for Hg - 1223 were a=3.99 , b=3.99 and c=16.47 , the compound Cu - 1223 had a=4.171 , b=4.171 and c=16.743 and the compound Sn - 1223 had a=4.05 , b=4.05 and c=15.682 .The EDX analysis for all compounds was investigated to show the elemental ratio in the mixture in agreement with the applied concentration of elements. The SEM analysis for all ceramic samples were showed the surface morphology and then the nature of grains and their size. The Iodiometric Titration Method also had been used to show the oxygen excess that was the role to enhance the mechanism of superconductivity.The resistivity measurement plays an important role in proving the predominate phase and the superconductor behavior through the presence ofIXcritical temperature which was about 115 K, 128 K and 110 K for superconductor compounds Hg - 1223, Cu - 1223 and Sn - 1223 respectively. In order to remove the low phase Cu - 1212 appearance in the crystal structure of the high temperature superconductor compound Cu - 1223 and to improve the superconductor properties we repeated the sintering process. As a result the XRD analysis indicated that the low phase Cu - 1212 predominated in the crystal structure which was had tetragonal phase with the lattice parameters a=3.55 , b=3.55 and c=12.37 . The resistivity measurement was supported the low phase Cu - 1212 with critical temperature about 64 K.

تصميم وتصنيع غشاء رقيق من اكاسيد الزنك المضاد للانعكاس باستخدام تقنيات مختلفة == Design and Fabrication of Antireflection ZnO Thin Film by Using Different Techniques

Author name: نداء طه ياسين
Supervisor name: علاء جبار غزاي
General topic: Physics
Specific topic: Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: In this work single layer antireflection coating of ZnO thin film has been designed and fabrication on glass and PSi substrates using pulse laser ablation (PLA) and spin coating techniques.Mainly, the work, divided into two parts, first : single antireflection of ZnO thin film using modified characteristics matrix to satisfy zero reflection condition theoretically. Second : ZnO nanoparticle deposited on different substrates using PLA which including the effect of duration pulse of 1000, 1500, 2000 pulses, Energy of 600, 700, 800 mJ and type of solvent by methanol and distilled water have been fabricated studied. In addition, spin coating method have been employed to synthesis this film. Structural and optical properties of prepared films have been characterized using XRD, SEM and EDX, and UV - Vis, respectively.XRD results revealed that the ZnO thin film have hexagonal structure with polycrystalline in nature with preferred orientation of (002). In addition, crystalline size was increased with the increasing of duration pulses at methanol solvent at fixed energy of 700 mJ, besides; in distilled water solvent at 700 mJ have low crystalline size at duration pulse of 1500 pulse. While at fixed duration of 1500 pulse, the crystalline size has low valne at energy of 700 mJ . As well as, the film deposited on glass and PSi substrate using sol gel method have crystalline size of (96.83and 85.16) nm respectively. Narrow FWHM and no phase change has been observed in all cases. SEM images showed that for all cases the films were homogenous with some island and cluster then cracking started to obtain with the increasing of increase the pulse number. Expected of film on glass prepared using

بناء وتوصيف BNT - BKT - BT البيزوالكترك لخزن الطاقة == Construction and Characterization of BNT - BKT - BT Piezoelectrics for Energy Harvesting

Author name: نذير بشير محمود
Supervisor name: عماد خضير الشكرجي
General topic: Physics
Specific topic: Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: Lead - free piezoelectrics are non - toxic, cheap and environmental friendlymaterials. Among them Bismuth Sodium Titanate (BNT) which has thechemical formula Bi0.5Na0.5TiO3 with a complex A - site perovskite structure. Inthis study, some modifications on BNT were used to help in applications byforming solid solution with Bi0.5K0.5TiO3 (BKT) and BaTiO3 (BT). The BNTbased(xBNT - yBKT - zBT) with x+y+z=1 ; were prepared via different methodsat the Morphotropic Phase Boundary (MPB) : 0.94BNT - 0.06BT , 0.93BNT - 0.07BT , 0.8BNT - 0.2BKT, 0.84BNT - 0.16BKT and 0.9BNT - 0.065BKT - 0.035BKT with their origin BNT , BKT and BT. Mini Database was proposeddepending on the results of international databases and some crystallographysoftware and plotted as phase diagrams. Several predictions were suggesteddepending on the built Mini Database and phase diagrams for the BNT - BKTBTsystem. The main prediction was : the physical properties either dependedon the changing of crystal structure ( polarization , dielectric constant ,piezoelectric coefficient ) or the properties had linearity with the composition (density, melting point , sintering temperature ). It has been focused on thestudying the crystal structure, dielectric measurements, hysteresis loopmeasurements and polarization fatigue analyses for ceramic samples.The samples were prepared by different methods : the hydrothermalmethod with spherical shape particles of 65nm - 600nm size; and by solid statereaction method. The powder were pressed in suitable template at 250MPa ,sintered according to database prediction "sintering temperature phase diagram", the resulted ceramic discs had relative density 90% - 96 %. These results agreed with the database predictions "sintering and density phase diagrams”.The crystal structure for the prepared samples were studied using X - ray diffraction (XRD) analysis, the XRD showed that the samples BNT - 6BT, BNT - 7BT, BNT - 20BKT, BNT - 16BKT and BNT - BKT - 35BT had the Morphtropic Phase Boundary (MPB) while BNT had the rhombohedral structure. BKT and BT had a tetragonal structure. These results agreed with the predictions "crystal structure phase diagram" The dielectric measurements showed that there were three regions for BNT - BKT - BT system; the first one was the samples with relaxor ferroelectric behaviors, the samples belonging to this region were BNT, BNT - 6BT, BNT - 7BT, BNT - 20BKT, BNT - 16BKT and BNT - BKT - 35BT (i.e. BNT and the MPB region). The second region was the samples with Normal ferroelectric behavior.The sample with this region was BT. The third region was the samples with relaxor - like ferroelectric behavior (weak ferroelectric) as in BKT. The Curie temperature for the samples within MPB was between 270℃ to 300℃, while for the origin : for BNT the Curie temperature was about 320℃; for BKT was about 370℃; and for BT was about 110℃. The depolarization temperature for samples within MPB region was below 100℃ (above room temperature) while for BNT was 250℃.The hysteresis loop measurements were studied both experimentally and theoretically. The study showed that the results for BNT were Ps=35μC/cm2, Ec=60kV/cm, for BKT was Ps=30μC/cm2, Ec=4.7kV/cm and for BT was Ps=26μC/cm2, Ec=9.8kV/cm, while for the samples within the MPB region the results were Ps=45μC/cm2, Ec ≈ 30kV/cm. The polarization had the largest value within MPB, which agreed with the first prediction by the proposed database (i.e. the polarization of BNT - BKT - BT system depends on crystal structure). The coercive electric (Ec) had a linear behavior with the composition. The value of Ec within MPB was in the range of 27kV/cm to 33kV/cm, which was half of the value for pure BNT. This result agreed with the second prediction by thedesigned database. The polarization fatigue analyses were performed depending on the fatigue model. The results showed that the polarization life cycle had the values of 1012 cycles for BNT, 1011 cycles for BT and 104 cycles for BKT, while within MPB region the polarization life had the largest value of about 1016 cycles which was much greater than in origin (BNT, BKT and BT). This result also agreed with the first prediction by the designed database (polarization life cycle had the largest value and depends on the crystal structure). The fatigue analyses predicted the value of applied electric field used in hysteresis loop measurements and the effect of cycle on the applied electric field.Finally, some of the problems were skipped and properties of BNT were enhanced by looking for the MPB region in the solid solution. The MPB showed the value for polarization to be larger than that in pure BNT, and it reduced the coercive electric field comparing to the original BNT. The polarization life cycle at MPB was much greater than in BNT. Therefore, this study could find some solutions for the drawbacks of BNT, and solve some problems for other piezoelectrics.

دراسة عامل تراكم الجرعة لاشعة كاما في الماء والكرافايت ضمن مدى الطاقة (10 - 4) م. ا. ف == A Study of Gamma Ray Dose Buildup Factors in Water and Graphite, in the Energy Range (4 - 10) MeV

Author name: حنان محمد جواد
Supervisor name: ليث عبد العزيز العاني
General topic: Physics
Specific topic: Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: لقد اجريت دراسات عديدة لقياس عامل التراكم لاشعة كاما بانواعه المتعددة لما له من اهمية في قياس الجرع الناتجة من استخدام الاشعة الكهرومغناطيسية وفي تدريعها. في هذه الدراسة تم حساب عامل تراكم اشعة كاما لاثنين من مواد التدريع (الماء والكرافيت) ضمن مدى الطاقة (4 - 10) مليون الكترون فولط، ولغاية سمك 5 معدل مسار حر, لتحقيق هذه الدراسة تم كتابة وتنفيذ برنامج محاكاة باستخدام لغة Visual Basic language اصدار Gوتطبيقه اعتمادا على اسلوب محاكاة مونتي كارلو.الفكرة الاساسية للبرنامج تشمل وصف السلوك الحقيقي للاشعاع والتنبؤ بحركتة العشوائية خلال الوسط. يمكن استخدام هذا الاسلوب لمحاكاة المسالة التقليدية (الكلاسيكية) الناتجة عن سقوط الاشعاع على شريحة مسطحة تعمل كموهن لاشعة كاما. الشكل الهندسي للمصدر المشع الذي اعتمد في هذه الدراسة هو مصدر مستوى عمودي احادي الطاقة.في هذا البحث تم دراسة عامل تراكم الجرعة لاشعة كاما بوجود وعدم وجود تاثير انتاج الزوج ولنفس الطاقة. كما تم دراسة عدد من المتغيرات المتعلقة بتصميم البرنامج والمسماة متغيرات المحاكاة والتي تتضمن عدد اشعة كاما التي يمكن تتبعها وعدد تقسيم مدى الطاقة. تم دراسة اعتماد عامل التراكم على كل من طاقة الفوتون الساقط, عمق الاختراق والعدد الذري لمادة الدرع في حساب عامل تراكم اشعة كاما اظهرت النتائج ان عامل تراكم الجرعة لاشعة كاما يتناسب عكسيا مع زيادة الطاقة. ويمكن تبرير هذا السلوك بما يلي : عند زيادة الطاقة (ضمن مدى الطاقة المدروس) فان احتمالية استطارة كومبتن تتناقص، لان تاثير كومبتون يتناسب عكسيا مع زيادة طاقة. كذلك فان زيادة الطاقة تؤدي الى زيادة قدرة اختراق اشعة كاما في الوسط وهذا يؤدي الى انخفاض احتمالية الاستطارة بزوايا صغيرة وهذا ينعكس على حساب عامل تراكم الجرعة (حيث انة الاستطارة بزوايا صغيرة لها دور كبير في حساب عامل التراكم ). لكل من الكرافيت والماء، اظهرت النتائج الى ان القيم المحسوبة من عامل تراكم الجرعة لاشعة كاما عند عدم وجود تاثير انتاج الزوج اقل مقارنة عند وجود تاثير انتاج الزوج حيث تبقى مساهمة استطارة كومبتن هي الغالبة مقارنة مع تاثيرالفناء(تاثير انتاج الزوج) ضمن مدى الطاقة (4 - 10) مليون الكترون فولط .النتائج التي تم الحصول عليها بالنسبة للماء من برنامج محاكاة مونتي كارلو في هذه الدراسة كانت قريبة جدا الى بعض النتائج التجريبية المنشورة بالمقارنة مع نتائج محاكاة مونتي كارلو التي تم الحصول عليها من بعض الابحاث المنشورة. حيث تعتبر المقارنة مع النتائج التجريبية افضل وسيلة للحكم على النتائج المستحصلة نظريا. | Several studies have been conducted to measure different type of gamma ray buildup factor for its importance in measuring the dose resulting from Electromagnetic rays use and its shieldingIn this study gamma ray buildup factor for two shielding materials water (Zeff =7.42) and graphite (Z=6) within the energy range 4 - 10 MeV and up to 5 thickness mean free path has been studied. To achieve this study a simulation computer program has been written (Visual Basic language version G) and applied depending on Monte Carlo simulation method. The basic idea of the program includes real radiation behavior description and prediction of its random movement through the media. This method can be used to simulate a traditional problem (classic) resulting from the fall of the beam on the flat slide works as attenuator for gamma rays. The radioactive source geometry adopted in the study is mono energetic normal plane sourceIn this research the contribution of annihilation effect on the calculation of gamma ray dose buildup factor has been studied in the same energy and within the studied energy range. This study also examining a number of variables related to the program design called simulation variables like number of gamma scenarios, number of divisions for energy. This research is also including study the effect of energy for the incident photon, shield thickness, and atomic number for shielding material on the calculation of gamma ray buildup factor. The results indicated that the gamma ray dose buildup factor is inversely proportional with energy increase. This behavior means that when the energy within the studied energy range is increased, the probability of Compton effect decrease, since the Compton effect is inversely proportional with energy. Second, the penetrating ability for gamma radiation is also increase and this leads to an decrease in the probability of scattering with small angels and finally it is reflected on the calculation of dose buildup factor (the scattering with small angels plays a very important role in the calculation of buildup factor). For both graphite and water, although the results indicated that the calculated values of dose buildup for plane source when the contribution of pair production is ignored, less in comparison when the contribution of pair production is taken in consideration but the contribution of Compton effect is still more predominant than the effect of annihilation within the range of energy (4 - 10) MeV.The results obtained from the performed Monte Carlo simulation program in this study are very closer to the published experimental results (error = 10.4%) in comparison with Monte Carlo simulation results (error = 40.58%) obtained from some published researches. The comparison with experimental result is the best way to judge on the accuracy of the results obtains theoretically

تطوير واستخدام منظومه كشف المواد المتفجرة عن بعد == Development and Optimization of Stand off Explosive Material Detection System

Author name: ولدان محمد عواد
Supervisor name: سهى موسى خورشيد الاوسي | كمال حسين لطيف
General topic: Physics
Specific topic: Physics
Degree: Doctorate
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: In order to develop a effected method to reveal the presence of explosive, numerous detection techniques have been studied that are capable of detecting explosives, The current study provides an overview of the present techniques like LIBS which is an atomic spectroscopy, and examined a new technique for detecting called laser induced fluorescence (LIF).LIF essentially measures the optical emission of the excited energetic materials by laser. The use of LIF has led to the discovery of unreported optical characteristics of some compounds that are exclusive to the individual material, like the phase shift and the modulation depth of the fluorescence signals.A high resolution spectrometer is used to record the fluorescence emission wave length for three types of explosive materials, These optical characteristics consist of fluorescence shoulders of the three samples in the wave length between (300 - 370) nm .Using fast rise time photo multiplier and spatial amplification for the fluorescence signal enable us to detect the time domain fluorescence spectrum for three types of explosive materials (AN), (TNT),( C4) and other non - explosive material, this method used Carefully for 8m standoff detection, different type of substrate is examined to simulate the real scan, both the time domain and frequency domain is measured for efficient LIF spectroscopy that give us a total configuration of the tested sample.A library of a total time configuration for different type of material s spectrum enables us to develop a algorithms to distinguish between expl osive and non - explosive material. Used to develop a recognition program to achieve high sensitive detection system.

تصميم وتنفيذ متحسس لمعامل الانكسار باستخدام الالياف الضوئية البلورية PCF == DESIGN AND CONSTRUCTION OF REFRACTIVE INDEX SENSOR USING PHOTONIC CRYSTAL FIBER PCF

Author name: مريم عبد الجبار جاسم
Supervisor name: سھى موسى خورشید الاوسي
General topic: Physics
Specific topic: Atomic Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: Photonic crystal fiber (PCF) provides the availability to insert somematerials that enable the materials inside the PCF that provides thematerials to interaction with the light directly where the sensitivity releasedfrom the PCF is higher than the conventional optical fiber. Because of theimportance of the refractive index in many industrial by use it as amonitoring tools, because the clearly relationship between the temperatureand the refractive index and because the clearly sensitive of the phase ofthe liquid - crystals (LCs) where it has a range of temperature to be stay as(LCs) to the temperature and when the temperature be above this range theLCs will be liquid , The aim of the thesis is construction refractive indexsensor using photonic crystal fiber by infiltrating some different materialsof LC such as EBBA (N - (4 - Ethoxybenzylidene) - 4 - n - butylaniline) andMBBA (N - (4 - Methoxybenzylidene) - 4 - n - butylaniline) inside threedifferent kinds of a hollow core PCF (HC - PCFs) like HC - 800 - 02, HC - 1550 - 02, and HC19 - 1550 and using three different laser wavelengthswhich were; 638nm, 850nm, 1550nm. This diversification in the use oftools enable to consider different cases of designed sensor and determine itssensitivity at each case, then one can estimate the perfect cases of thedesigned sensor.It is found that the highest RI sensitivity was 173.31 dBm/RIU forthe HC19 - 1550 infiltrated with the EBBA using the laser with wavelength638nm, while the highest temperature sensitivity was 0.2505 dBm/°C forempty HC - 1550 using the laser with wavelength 1550nm.

دراسة تاثيرات حزمة ليزر هيليوم - نيون واشعة كاما علي المشعع بجسيمات الفا باستعمال بعض CR - كاشف 39 التقنيات المطيافية == Studying the Effects of He - Ne Laser Beam and Gamma Radiation on CR - 39 Detectors Irradiated by ? - particles Using Some Spectroscopy Techniques

Author name: محمد محسن نعمة
Supervisor name: ندى فاضل توفيق
General topic: Physics
Specific topic: Atomic Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: The aim of the present work was to study the effect of alpha - particles, gammarays and (He - Ne) laser beam on the track registration and optical properties of CR - 39 detectors. Twenty - four detectors divided into five groups. First group : include nine detectors were exposed to different powers of (1, 5 and 10 mW) of laser beam at times (5, 10 and 15 min) and then irradiated to alpha - particles from 226Ra source. Then it was measured following track parameters, track diameters - D, track density - ρ, and calculated the bulk etching rate - VB, track etching rate - VT, critical angle - Өc, etching efficiency - η, Sensitivity - S, etching ratio rate - V. The results show there was increased in the values of - D, ρ, VB, VT and Өc with increasing of the exposure times of laser beam at (1, 5 and 10 mW) powers, and decrease in the values of - η, S and V with increasing in the exposure time of laser beam at_1 mW power, while increasing within increase of exposed times of laser beam at (5 and 10 mW) powers. And found the appropriate etching time of CR - 39 track detector at etching time of - 4 h with NaOH etchant solation and - 6.25 N at temperature 60 oC. Second group : includes un - irradiated detector as a control. Third group : include five detectors from CR - 39 detector it was irradiated by gamma radiation from 60Co source with doses (300, 500, 800, 1200 and 1600 kGy). Fourth group : include third groups where it was exposed to laser beam at 10 mW power for 15 min. Fifth group : include nine detectors were exposed to powers - 1, 5 and 10 mW of laser beam at times (5, 10 and 15 min). The optical properties of detector were studied by using the UV - Vis. and FTIR spectroscopy.Where it was calculated the optical energy band gap and number of carbon atom to groups (Second, Third, Fourth and Fifth). The results of ultraviolet spectra show increasing in the absorbance - A of detector with increasing in the time exposure of laser beam at different powers and gamma doses, and also decreasing in the optical energy band gap and increasing in the number of carbon atom with increasing in the exposure time of laser beam at different powers and gamma doses. As for the FTIR spectra show change in the peak position of the bands detector to groups (Third, Fourth and Fifth).

دراسة خصائص انتقال لمتضمنات صوتي - ضوئي عالي السرعة والتردد == Study The Transmission Characteristic of Acousto - Optic Modulators for High Modulator Speed and High Frequency

Author name: لبابة عبد الكریم الجنابي
Supervisor name: سھى موسى خورشید الاوسي
General topic: Physics
Specific topic: Atomic Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: Acousto optics is a science that studying the light and acoustic interaction for purposes of manufacturing modulators and sensors. The technology turned to the use of acousto optic to solve the problem of transforming the communication technology from the traditional one that used the radio signal in coaxial cable into the modern one that uses the laser light in the optical fibers. Also, this enables to overcome the problem of loss and attenuations that occur in the transmission lines using the traditional technology. More sophisticated methods are suggested to help communication researches; one of the most interesting acousto optic applications are the modulators. The modulators are manufactured for specific applications, such that the input energy power and light frequency are taken in to account. The modulator of this application can achieve high accuracy with some co - operation related to the suitability of used material.In the present research, a high speed and high frequency modulator are proposed based on the concept of acousto optic interaction. The occurrence of the interaction requires existence some experimental material arranged in uniform modulator template. The analysis enables to determine the requirements of the proposed modulator design. The newly proposed idea is the use of highly transparent material that absorbed the interference associated with diffraction. Four types of materials are used to test the proposed designed modulator; they are : LiNbO3, SiO2, TeO2, and Ge, the use of such materials offer rich considerable results especially when using different light frequencies to be input into the interaction system. The proposed modulator design is computerized implemented using Comsolsoftware with predefined characteristics are determined in the stage of the analysis and requirements. As a result, different results are obtained for different use of materials and characteristics.The results are examined using validation test, which includes some performance indications. These indications are achieved by two paths : the first is the measurements of operating parameters that obtained by Comsol directly, while the latter is related to computations of efficiency that achieved programming the theoretical relations using MatLab. Actually, the measurements in the first path are documented to ensure the acceptable performance of the proposed designed modulator, whereas the computations of the second path are recorded to ensure the high performance efficiency of the proposed modulator design. In general, the achieved results were matching the state of art given in most advanced literatures, which ensure the validation of the proposed design and correct paths of performance description.The results showed that the proposed modulator design performed the modulation test with an efficiency percent of about 95%, when using LiNbO3 material in the modulator head, and this efficiency is decreases lightly when using other materials. Besides, the employed measurements and computations are nominating the use of LiNbO3 material rather than others to be used in such types of modulators due to its suitable optical features.Frequent practice tests showed that the behavior of the modulator was acceptable and it is enjoying the ability to be improved. The encouraging results gave the opportunity to suggest some developments for future work in order to strength the modulation results.

تحضير التراكيب النانوية للمركب Ba1 - xCaxTiO3 ودراسة الخواص الفيرواليكتريك == Synthesis and Characterization of Ferroelectric Ba1 - xCaxTiO3 Nanoparticles

Author name: عقيل عبد الرضا خضير عباس
Supervisor name: عماد خضير الشكرجي
General topic: Physics
Specific topic: Atomic Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: في هذه الدراسة تم تحضير المركب النانوي تيتانيت الباريوم كالسيوم Ba1 - xCaxTiO3 بقيم مختلفة لعامل التعويض (x) وهي 0, 0.25, 0.5, 0.75, 1. الطريقة المستخدمة في التحضير هي طريقة الهيدروثيرمال الكيميائية والتي تعتبر من الطرق المفضلة لتحضير تراكيب نانوية متبلورة وذات نقاوة عالية. درجة الحرارة المحددة للتحضير كانت 200 درجة مئوية والضغط كان 20 بار.الجسيمات النانوية المحضرة كان لها معدل حجم جسيمي يتراوح بين 20 الى 41 نانومتر. بعد ذلك تم كبس المساحيق بضغط قدره 127 MPa للحصول على اقراص بقطر 1 سنتيمتر. في المرحلة اللاحقة تم اجراء عملية التلبيد لهذه الاقراص بدرجة حرارة 900 درجة مئوية ولمدة اربع ساعات. معاملات التركيب البلوري والمجموعة الفراغية ومعاملات الشبيكة والحجم الجسيمي والحجم الحبيبي تم الحصول عليها من التحليلات التركيبية والشكلية مثل حيود الاشعة السينية والمجهر الالكتروني النافذ ومجهر التصوير الالكتروني. تم استعمال برامجيات خاصة مختلفة في تحليل النتائج مثل حيود الاشعة السينية والمجهر الالكتروني النافذ ومقارنتها مع النتائج الموجودة في قواعد البيانات العالمية مثل ICSD .اضهرت نتائج التحليلات اكتساب المادة طورا بلوريا متعدد باستثناء الشرط التعويضي x = 1 حيث وجد انه يميل لامتلاك طور منفرد. تم دراسة الخصائص الكهربائية المتمثلة بالقياسات العزلية الكهربائية للمركب Ba1 - xCaxTiO3 حيث تم اعتماد حالتين في هذه الدراسة, الاولى كانت تتضمن تغيير التردد وتثبيت درجة الحرارة, والثانية بتغيير درجة الحرارة مع تردد ثابت لغرض قياس ثابت العزل الكهربائي r)ɛ) ومعامل الخسارة (D) , وايضا تم قياس درجة حرارة كيوري (TC). لوحظ خلال البحث ارتفاع قياس درجة حرارة كيوري (TC) مع زيادة نسبة محتوى الكالسيوم Ca في المركب. وجد ايضا افضل قيمة لثابت العزل الكهربائي ودرجة حرارة كيوري هي عند الشرط التعويضي x = 0.25, لذلك توجد امكانية لهذه المادة للتطبيق في المتسعات وتطبيقات الانظمة الالكترونية عالية الفولتية | In this study, a nano - compound Ba1 - xCaxTiO3 (BCT) was synthesized with varying substitution x = 0.25, 0.5, 0.75, and 1. The method used for synthesis is the hydrothermal chemical process, which is preferable to produce ultrafine, pure, and crystalline nanostructures. The material was synthesized at 200 ℃ and was 20 bar pressure for 24 hours. Barium acetates, calcium acetates, and titanium tetrachloride were used as starting materials. The synthesized nanoparticles had a range of particle size (20 - 41 nm). The powder was pressed into a pellets at pressure 127 MPa to get a diameter 1 cm and thickness 2 mm. Then, these pellets were sintered at 900 ℃ for 4 hours. The parameters of the crystalline structure, space group, lattice constants, particle size and grain size were obtained from the structural and morphological, and topological analyses (i.e., XRD, TEM, and SEM). Special different software were used for analyzing, and specification of the structural and morphological results so as to make a comparison with international results and databases like ICSD. The nano powders produced has a polycrystalline structure, except at substitution (x=1), which possesses a single phase structure. Dielectric measurements for Ba1 - xCxTiO3 were achieved. Two conditions were considered in the study. The dependence of dielectric constant (ε_r) and dielectric loss (D), on temperature and frequency was measured at constant frequencies and temperatures respectively. The values of Curie temperature (TC) were determined from the dielectric measurements. It is found that the values of Curie temperature were shifted toward higher temperatures as a result of increasing the calcium ratio in the compound. The composition Ba0.75Ca0.25TiO3 (x = 0.25), reported the best results which are related to crystalline phase, morphology, dielectric constant and Curie temperature relatively, so it is recommended in capacitors and high voltage power electronic applications.

السلوك التلبيدي والخواص العزلية للمتراكب MgAl204 - Al == Sintering behavior and thermal insulating properties of (MgAl204 - Al) spinel composite

Author name: علي حسين صالح
Supervisor name: قاصد عبد الستار صالح الجنابي
General topic: Physics
Specific topic: Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: Spinel - Aluminum composites are drawing greater attention due to their low density, excellent physical, mechanical and refractory properties. This work aims to study the preparing one of the most current conventional technique and sintering behavior of Spinel - Al composite through characterization of the physical, mechanical properties as well as XRD and microstructure of the synthesis Spinel - Al composite specimens.Magnesia (MgO) and alumina (Al2O3) were used as starting materials to prepare stoichiometric magnesium aluminate spinel (MA) via single stage firing process (solid state reaction).Spinel (reinforced material) which prepared at sintering temperatures 12000C and 14000C for 2h soaking time was added in different weight percentage, i.e. 2,4,6,8 wt.% to the aluminum (matrix material) for synthesis Spinel - Al composites in a temperature range of 450 - 6500C via solid state reaction (SSR). The sintering parameters, XRD, microstructure, mechanical and thermal properties of the Spinel - Al composite products were investigated as well as the influence of each of the synthesized spinel contents and sintering temperature on sintering behavior of the composite products were also discussed. The results show that the better sintered density, water absorption, compressive strength, and thermal conductivity of the composite products obtained at low amount addition of spinel fired at 1200 and 14000C was 2wt.% and at 6500C.Also, studying of X - ray diffraction (XRD) for prepared spinel - aluminum composite specimens showed that the composites has many crystalline orientations (38.70, 44.970, 65.30 and 60.190), (390, 45.20, 65.620 and 60.330), (38.90, 45.150, 65.470, and 60.40) and (38.850, 45.260, 65.60 and 60.40) corresponding to (111), (200), (220) and (333) for 2,4,6,8wt% of spinel respectively.The studying of the morphology of spinel - aluminum composite specimens reveal that average grain size of reaches about 6.03, 6.17, 6.22, 6.3 (μm) for 2, 4, 6, 8 wt.% of MgAl2O4 fired at 12000C respectively, whereas their average grain size reaches about 7.18, 7.57, 7.9, 8.48 (μm) for the same spinel content fired at 14000C respectively.

تحضير ودراسة جسيمات الفضة النانوية وتاثيرها المضاد للبكتيريا == Preparing and Studying Nano Silver Particles and Their Anti Bacterial Effect

Author name: سماح صباح عبد الرزاق
Supervisor name: ثامر عبد الجبار جمعة
General topic: Physics
Specific topic: Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: The target of this research is to prepare nano silver particles by laser ablation in both deionized and magnetized water. The properties of nano silver particles and their bacterial effects with different parameters’ were studied. The magnetic water was laboratory preparing by square magnets with magnetic flux of 200 mT applied on the deionized water which pass through it 10ns Q.swiched Nd - YAG laser of wave length 1064nm with different energies and different laser pulses number were used with and without applied electric field. Optical properties for the nano silver colloidal by UV - Vis technique was investigate. The absorption for the silver spectrum was found lied at 420 - 430nm, i.e. involved visible region. The absorption peaks have different height due to different both the shape and concentration of nano silver in the colloidal.TEM technique was used for investigating both size and shape of nano silver particles. The nano silver particles have different shapes such spherical, spindles, etc…. depending upon two parameters is laser energy and laser pulses number. The effect of nano silver particles on bacteria growth of three types of bacteria (staph, ps., E.coli) were studied in details under effect of applied electric field of 3000V/m. There is no inhibition zone was obtained when used different silver colloidal except the colloidal prepared under 600mJ and 1000laser pulses, where this colloidal gives an effected property and ability to determine the bacteria growth type ps. In the range of inhibition of 25nm.The results of the TEM show that the shape of nanoparticles affecting the growth of bacteria was spherical and its size ranges between32 - 50nm.

محاكاة لمتحسس بايولوجي باستعمال الالياف البلورية الفوتونية == Simulation of Biosensor Using Photonic Crystal Fiber

Author name: زينة خليفه حمد الدليمي
Supervisor name: احمد كمال احمد
General topic: Physics
Specific topic: Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: تشكل الياف القلب المجوف والقلب الصلد النوعين الرئيسين من الالياف البلوريه الفوتونيه, ان وجود ثقوب هوائيه في هذه الالياف يساعد على حجز الموجات الكهرومغناطيسيه داخل منطقه القلب كما يساعد في تغيير خصائص الانتشار في الالياف.ان امكانية ملئ هذه الالياف بالسوائل يساعد على تطوير خصائصها البصريه. في هذا البحث تمت دراسة نوعين من الالياف البلوريه الفوتونيه كعناصر تحسس في القياسات الاحيائيه.تم دراسة تاثير حقن الليف البصري بسوائل مختلفه نظريا باستخدام طريقة العناصر المحددة. نفذت عملية حقن الليف المجوف (ماخوذ من القلب 19 خليه) وليف مجوف(ماخوذ من القلب 7 خليه) بسوائل مختلفه ( الماء, الماء الثقيل, بينتانول , دم انسجة الكبد البشريه, دم انسجة القالون البشريه والدم لبشرة الجلد). حسبت خسارة الحبس نظريا باستخدام عدة اطوال موجيه لليف البلوري الفوتوني, وجد ان خسارة الحبس تتناقص تدريجيا للاطوال الموجيه الاصغر كلمزااد معامل انكسار الماده المحقونه. وحسبت قيمة التحسسيه نظريا بالاعتماد على تغير الفقدان في حجز الضوء للنمط الاساسي لليف المحقون بالسائل.وجد ان اعظم حساسيه كانت في مادة الدم لبشرة الجلد وتساوي 674.603 لكل معامل انكسار لنوع وافضل مجال كهربائي وجد لنفس الماده انه يساوي 671 لكل فولت على متر.بينما اعظم حساسيه في نوع وجد انها تساوي 147.201 لكل معامل انكسار لمادة القولون وافضل مجال كهربائي كان في هذه الماده ويساوي 366 لكل فولت على متر. تم اخذ الالياف البلوريه الفوتونيه مصمه باقطار مختلفه وايجاد توجيه الليزر باطوال موجيه تتراوح من (1600 - 600) نانومتر داخل الليف البصري البلوري باستخدام برنامج | Solid and hollow cores comprise two sorts of photonic crystal fibers (PCF). The presences of air holes in PCF serves to both confine electromagnetic waves within the core of the fiber and manipulate its propagation characteristics. the potential of filling the PCF with liquids may improve their optical characteristics. In this thesis, both sorts of PCF were investigated as sensing measurements of biological elements. The impact of liquid filling hollow core PCF was studied theoretically using finite element method. Infiltrated HC19 - 1550 (19 cells are taken from the core) and HC - 1550 (7 cells are taken from the core) PCFs with different liquids (water, heavy water, pentanol, colon tissue, liver tissue and epidermis human skin) were applied. Confinement loss was computed theoretically and found that the confinement loss decreased to shorter wavelengths with increased the refractive index of the liquids. Amplitude sensitivity was computed theoretically by deeming the change in confinement loss for the fundamental mode of liquid filled PCF. The maximum amplitude sensitivity was found to be 674.603 in epidermis blood and the best electric field was found to be 671 V/m in the same liquid for HC19 - 1550, while the maximum sensitivity in HC - 1550 is 147.201 for colon tissue with best electric field found to be 260 V/m also in the colon tissue. Photonic crystal fiber has been taken in different diameters and laser guided by wavelengths from (600 nm - 1600 nm) inside the optical crystal fiber using Comsol multiphysics program

استخدام طريقة للتبع نقطة الطاقة القصوى على اساس الحرارة للسطوح الكهروضوئية باستخدام برنامج PSPICE == Maximum Power Point Tracking approach based on Temperature for PV Surfaces using PSPICE program

Author name: حارث محمد سعيد حامد
Supervisor name: زينب منذر يونس كبة
General topic: Physics
Specific topic: Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: This research study the effect of Photovoltaic surface temperature on Photovoltaic panel output characteristics. First, circuit simulator PSPICE was used to compose Photovoltaic panel model at 75 W, 4.8 A and 21 V. Then, study the behaviorof it under varying conditions (solar insolation, environmental temperature and PV panel surface temperature). ABM feature of PSPICE was used to include the above parameters in PV PSPICE model and produced temperature dependent voltage. The voltageconverted to current with galvanic insolation by element Gploy with gain 0.8. The model defined as hierarichal block in PSPICE library and could be called as individual source for any applications.After studying the effect of PV surface temperature on its (IV) curves specially the position of the maximum power point, this temperature was used to keep tracking of the optimal voltage for the PV panel at the MPP. Therefore DC - DC boost converter was used to achieve this purpose.Boost converter was raise a PV panel voltage from 17 V to 34 V for all variation of surface temperature from 300 K to 350 K at frequency 10 KHz and ΔVo = 5 V.

تاثير المسافة بين الاقطاب ومادة الهدف باستخدام الترذيذ المغناطيسي ذو التيار المستمر == The Effects of Electrodes Separation and Target Material by DC Discharge Magnetron Sputtering

Author name: بان فيصل رشيد
Supervisor name: خالد عباس يحيى
General topic: Physics
Specific topic: Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: تتكون منظومة الترذيذ البلازمي من حجرة تفريغ اسطوانية مصنوعة من مادة (Bolosilicate) وتحتوي على قطبين دائرين من st. st. يحمل الكاثود, مادة الهدف وكذلك المغناطيس الثابت اما قطب الانود فيحمل النماذج الزجاجية التي سوف يتم طلاءها .في هذا البحث استخدمت مادتي الذهب والفضة كمادة لهدف. الهدف من هذه الدراسة, هو دراسة تاثير عوامل التشغيل مثل, المسافة بين القطبين ونوع مادة الهدف على خصائص اشكال سطح زجاجي مطلي بوجود المجال المغناطيسي والتي تمت دراستها باستخدام مجهر القوة الذرية (AFM). وايضا تم تحديد درجه حرارة الالكترون وكثافة الايونات والالكترونات واعلومات البلازما الاخرى بواسطة مجس لانكمور المنفرد عند ضغط ثابت (0.2 mbar).اظهرت نتائج هذه الدراسة بينت وجود زيادة خطية في كثافة الالكترونات والايونات وانخفاض اسي في درجة حرارة الالكترونات عند تغير المسافة بين القطبين ولخمسة قيم و(3,4,4.5,5 and 6)cm لمادتي الذهب والفضة وايضا تبين ان فولتيات التفريغ باستخدام الذهب كهدف هي اكبر منها في حالة الفضة. كذلك, وجد انه بزيادة المسافة بين القطبين فان درجة حرارة الالكترونات تقل لمادتي الذهب والفضة وكثافة الايون تزداد مسببة زيادة في قطر وارتفاع الحبيبة لتيار الترذيذ((I_d=30 mA باستخدام الذهب بينما يقل قطر الحبيبة ويزداد ارتفاعها باستخدام الفضة لتيار الترذيذ( (I_d=40 mA. من ناحيه اخرى, ان قيم درجة حرارة الالكترون باستخدام الفضة هي اكبر من القيم باستخدام الذهب وان علاقة قطر الحبيبة, وارتفاعها وخشونة السطح كدالة للمسافة بين القطبين هي ليست خطية. اصغر قيمة لمعدل قطر الحبيبة وارتفاعهاحصلنا عليه هو(90 nm) وnm)6) على التوالي لمادتي الذهب عند تبار الترذيذ ((I_d=30 mA و( . (d=4 cm وللفضة نفس قيمة قطر الحبيبة باستخدام الذهب عند(d=5 cm) لكن بارتفاع5.5 nm) ) عند (d=4 cm) ولتيار الترذيذ (I_d=40 mA). واصغر معدل ارتفاع للحبيبة لكل تيارات التفريغ 20,30,40,50 and 60 mA)) عند نفس المسافة بين القطبين (d=4 cm) باستخدام الفضة والذهب ولكل تيارات التفريغ ماعدا((〖 I〗_d=50 mA والذي يمثل اكبر معدل ارتفاع للحبيبة فيه باستخدام الذهب. واخيرا, ناتج عملية الترذيذ باستخدام الفضة اكبر مما عليه باستخدام الذهب. | In this work, a DC planner magnetron sputtering system used. Which consists of a cylindrical chamber, made from (Borosilicate). It contains two circular electrodes made from stainless steel. The cathode electrode is carried the target material and permanent magnet while a glass sample, which must coat, is placed on the anode electrode. In this works, gold and silver used as a target materials. The objective of this study is to examine the effects of operating parameters such as, electrodes separation, sputtering current, and type of target materials on the properties of glass surface coated under the influence of magnetic field. The surface morphology for the coated samples are studied by atomic force microscopy (AFM). Furthermore, electron temperature, ion and electron densities and other plasma parameters are determined by a cylindrical single Langmuir probe where the pressure up to(0.2 mbar). It is found that a linear increase in electron and ion densities and an exponential decrease in electron temperature with five values of electrodes separation (3,4,4.5,5 and 6) cm. That was observed for gold and silver target materials. Also, the discharge voltage using gold target is greater than that for silver target. Electron temperature decreased for gold and silver targets as the electrodes separation increased. The ion density increased which caused increasing in average grain diameter, height at sputtering current, Id=30 mA , when the target is gold. However, the average grain diameter is decreased and the height of grain increased at Id=40 mA using silver target. On the other hand, the values of electron temperature using silver target is greater than that for gold target. Also, the relation of average grain diameter, height and roughness surface as a function of electrodes separation are nonlinear. The minimum average values of grain diameter, height are (90 nm) and (6 nm) respectively for using gold at Id =30 mA and d=4 cm. For using silver at Id =40 mA the minimum average grain diameter is also (90 nm) at d=5 cm and height is (5.5 nm) at d=4 cm. For all discharge currents (20,30,40,50 3and 60 )mA , the minimum average grain height at the same electrodes separation d=4 cm for using silver and gold target except the value of Id=50 mA, whom a maximum average grain height is obtained. Finally, the sputtering yield for silver target is greater than that for gold target

تقييم السطح البيني لمنطقة الربط الكرافيت بالمعدن == Evaluation of the Intermediate Layer of Graphite Bonded Metal

Author name: مريم بديع عبود
Supervisor name: ثامر عبد الجبار جمعة
General topic: Physics
Specific topic: Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: This work investigates the joining between graphite and stainless steel grade (410), by using active filler metal paste. Brazing technique was chosen because it is efficient, verstile, fast and economical.These new phases considered enhancement the bonding strength of the assembly.

تصنيف الاداء الموجه وغير الموجه لصور الاقمار الاصطناعية == Supervised and Unsupervised Classification Performance Satellite Images

Author name: حسن سالم عبد المجيد
Supervisor name: ليث عبد العزيز العاني
General topic: Physics
Specific topic: Physics
Degree: Master
University: Al-Nahrain University - College Of Science - Physics Department
Language: English
University location: Baghdad
First pages:
Abstract: One of the main purposes of remote sensing satellite images is to interpret the observed data and classify features. Satellite image classification plays a major role in the extraction and interpretation of valuable information from massive satellite images.The primary purpose of this research is to classify multi - spectral Thematic Mapper satellite images using supervised classification. Unsupervised (RGB color model) and supervised classification (maximum likelihood method) is adopted to achieve the classification purpose. The classification accuracy depends upon the selection accuracy of the training area.PCA Transform is adopted and applied on the original bands to create the principal component images. The first three principle component image contains most the information in all the original bands. For this purpose the first three principle component images are chosen as RGB images to create a colored image.This colored image has been employed for determining and selecting the training areas which are very important for supervised classification after applying histogram equalization enhancement method on the colored image to make the selection of the training area more clarity and accuracy. After that the selection of the training areas is ready as an input for the supervised classification.Our results showed that the image with higher variance value doesn't represent a prerequisite in image clarity. The variance with mean value may reflect the quality of the image. The variance and means look like the torque in physics. So that we can see that the image with low variance and mean value near the middle of the dynamic range value has more quality than the image with high variance and mean value near the edge of the minimum or maximum value. Improve the selection of the training area (region of interest) visually plays an essential role in increasing the accuracy of supervised classification and this reflects on the calculation of the area for each class in the scene. In the present work, the overall accuracy increased from 68.5% to 98.9%after adopting the histogram equalization technique as an enhancement technique in improving the selecting the training area visually.Although a high classification accuracy with principal component image, but still the classification process with original bands is better because its values represent the real spectral reflectance. The result of classification accuracy with the original bands is enhanced from 68.5% to 97.08% and became very comparable with the result of classification accuracy with the principal component images 98.86% when the selection of the training area (region of interest) has been improved visually.In this thesis, the ENVI (Environment for Visualizin Images) software version 4.5 has been used to achieve the aim of this study.
1 ... 75 76 77 78 79 ... 122