عرض: 25 50 75 100 النتائج

نتائج البحث: 25 من أصل 2,901

مستقبل مكانة العراق في التفكير الاستراتيجي الامريكي The future of Iraq's position in American strategic thinking

اسم المؤلف: عمر عبد الجبار كامل الحياني
اسم المشرف: لبنى خميس مهدي الربيعي
الموضوع العام: العلوم السياسية
السنة: 2016
الموضوع الدقيق: الدراسات الاستراتيجية
الدرجة: دكتوراه
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Importance of the subject : The study of the process of American strategic thinking about the case, but it is the study of the phenomenon of ever - changing, the United States of America to adopt its strategy depending on the nature of each stage pass out, so the future of our study of the status of Iraq in US strategic thinking begin studying the goals of the United States changing in Iraq, according to each down to goals and future determinants of its strategy in this country phase.There is no doubt that Iraq has an advanced position in American strategic thinking, Iraq and by its very nature geo - strategic (political, economic, and security) is a variable influential and influenced by the countries of the regional neighbors and thus on the overall US interests in the Middle East that combines strategic location and stores the energy features, this is perceived by the United States which formulate strategies one after the other.It also highlights the importance of our study of the subject, in many respects, and perhaps most important is the timing, as the current phase is one of the most intense phase of the evolution of the US approach toward Iraq forestry because of the security crisis experienced by Iraq in its fight existential terror that still occupy parts of it, and also because of the development of Middle East fragile region and in this context, this study will try to monitor and identify trends in US strategic thinking and the type of performance that US administration, current and future, to deal with the situation in Iraq in accordance with the objectives of the current strategic interests of the US or to be reformulated if what I thought the US make a lot of efforts to assert its influence in Iraq and gain a foothold permanent military presence have it.This study runs from the specific problem of the effect that there was an officer and future US vision on Iraq factors, particularly the (site of Iraq in the US war on terrorism, the need of the United States for Iraqi oil, the rise of the Iranian role, the interest of the United States in the Middle East) Despite from the fact that these factors are within an environment characterized by liquidity and the pace of change at short ranges, the interests of the United States and its role in Iraq and the size of the threat to make the decline in the status of Iraq is not an option acceptable to the United States of America in the future.According to the problem, this study aims to prove the validity of the hypothesis that there is a direct correlation between the level of place occupied by the Middle East region in the priorities of the US administration and the extent of its involvement in its files that (the war on terrorism, to contain Iran's rising influence, energy security, the security of traditional allies States United American) and the prestige that supposedly enjoyed by Iraq, and for the purpose of proving this hypothesis has to be to answer a number of questions : - What attributes of US strategic thinking and characteristics that distinguish it?What is the importance placed on Iraq in US strategic thinking ? - - What are the main changes witnessed by the strategic direction of the US towards Iraq since the end of the Cold War? - What are the main internal and external variables affecting the future of the prestige enjoyed by Iraq in US strategic thinking ?In light of the foregoing and through our treatment of the subject of the future of Iraq, the US position in the strategic thinking of the elements of this status enjoyed by Iraq is made up of several aspects, according to available upon this country and of the advantages of the elements of power : Politically, the Iraq of the US view is a political gravity force insurmountable within the ranges of the Middle East region, especially if re - training course and adjust the behavior of its political system in the framework of cooperation relations or equivalent US influence, which will make a loop allies of the United States in the region , the economic importance of Iraq constitute oil wealth founded on, and perhaps this side is better explains the intensity of American strategic engagement in the case of Iraq exclusively in the region, on the other hand, the United States control over Iraq's oil and the Persian Gulf gave way to determine global production volumes and volumes of supply and oil prices so on, in making the development of other countries and growth of the economic subject indirectly American supervision, or security interest - the military of Iraq in US strategic thinking, Vtaatoty of the nature of the security environment of the Middle East where there are in the first place, and what is available upon Iraq the stature and impact in achieving military balance of regional security in this region is stable, the one hand, Iraq's position reflected in the security environment, territorial what constitutes a bridge vital links the Gulf states with Iran, it has Iraq has always been an important factor in the inter - relationship between Iran and its environs, as pose security agreements signed between Iraq and the United States in the content of public basic foundation of US military strategy in order to make Iraq a partner of the United States and among its allies in the war on terror.To determine the future of Iraq's place in American strategic thinking depends on the beginning of a series of issues that have a role in tipping Iraq's position or not in the formulation of a comprehensive US strategy for any US administration to come, whether or democratic republic, and most of these issues are : - The status of the Middle East in the American strategy : that the location of Iraq in the heart of the Middle East means self - evident that his place in US strategic thinking is the mortgage status of this region as a whole in the priorities of the American administrations, we have observed that the Middle East, the status of the decline in the US strategy for the South East region Asia - Pacific throughout the era of President Barack Obama has contributed to the decline in Iraq's position in the priorities of this administration, and therefore it would revive the trend of US interventionism in the affairs of the Middle East, again, that Iraq due course to the top of US strategic priorities. - The need of the United States for oil : the United States consume at present a quarter of global oil production, even though it has only 3 percent of global oil reserves, according to the statistics of 2015, saw the years between the years 2013 to 2015 US demand growth oil exceeds demand in China's growth (), so the United States consider to Iraq in the long term as a vital source for the future of energy in the world, as is expected, that Iraq would be his "biggest contribution to a great extent for the growth of global oil supply." , so the extent of the US need for oil will affect how much weight will have in the US strategic thinking. - America's war on terror : In the event of any US administration has decided to increase its involvement in the fight against terrorism, Iraq will remain until the near future is at the center of this war, in the sense that he must be the main square of her, and this intervention will reflect positively necessarily on Iraq, the status of the US American United, one hand is seen by many in the American research and study centers that the jump made by terrorist organizations in 2014 was the result of a full US withdrawal and non - official from Iraq in 2011, the study concluded two scenes prospective potential, namely. - that the United States increase its support and its military presence in Iraq to help in its war on terror in order to reassert its influence and role in the whole Middle East region and to prevent international and regional powers of the competition hegemony or fill US void in Iraq, and also confirmed that the US ambassador former Zalmay Khalilzad that opportunity back US influence in Iraq, large, and that the current data indicate that helping Iraq restore the military balance, the most important steps of the possible adoption by the US administration to support and strengthen relations with Iraq.to see the status of Iraq's decline in US strategic thinking, if it wanted the next US administration apply what he called Ian Bremmer, in his book "Great Powers : three options for the US role in the world," strategy "US Independence", which aims to reduce the United States of its international obligations dramatically, and that revolves around the inside first, and reduce military expenditures, in addition to withdrawing completely from the Middle East, where he sees that it is time for the decomposition of the responsibility for solving the problems of others, the United States is the US is depleted from during its obligations to defend allies

استخدام النموذج الرياضي والشبكات العـصبية لتحديد نسبة تلوث البيئة Employ Mathematical Model and Neural Networks for Determining Rate of the Environmental Contamination

اسم المؤلف: فرح فيصل غازي
اسم المشرف: لمى ناجي محمد توفيق
الموضوع العام: علوم الرياضيات
السنة: 2016
الموضوع الدقيق: الرياضيات
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: هناك العديد من الاهداف في هذه الرسالة : الهدف الاول هو تطوير نموذج المعادلة التي تصف انتشار التلوث خلال التربة والتي يمكن استخدامها لتحديد نسبة التلوث البيئي وذلك بتقدير تركيز المعادن الثقيلة في التربة. نموذج المعادلة التي تم تطويرها يمكن اعتبارها تمثيل جيد لمشكلة التلوث البيئي.الهدف الثاني في هذه الرسالة هو تصميم شبكتين عصبيتين ذات تغذية تقدمية باعتبارها تقنية دقيقة بديلة لتحديد نسبة التلوث البيئي والتي يمكن استخدامها في حل معادلة النموذج. الشبكة الاولى تحاكي معلمات التربة التي يمكن استخدامها في ادخال البيانات في الشبكة الثانية المقترحة، في حين تحاكي الشبكة الثانية لتقدير تركيز المعادن الثقيلة.الهدف الثالث هو تطوير المفهوم النظري لمرحلة تدريب الشبكات العصبية من وجهة نظر التحليل الدالي والطرق الامثلية. ضمن هذه الصيغة، التعلم يعني حل مشكلة متغايرة بواسطة تصغير دالة الاداء المتعلقة بالشبكة العصبية. ان اختيار دالة الهدف يعتمد على تطبيق معين. من جهة اخرى، فاننا نقترح تعديل على دالة الاداء لتحسين تعميم الشبكات المقترحة وعلى الجانب الاخر، لعلاج التوقف المبكر ومشاكل النهاية الصغرى المحلية.الهدف الرابع هو مقارنة اداء الخوارزميات المذكورة اعلاه فيما يتعلق بقدرة التنبؤ. ثم تطبيق التقنية المقترحة لتقدير تركيز المعادن الثقيلة مثل : النحاس والرصاص والكادميوم والكوبالت والزنك والنيكل في تربة بغداد. اولا، تم اختيار اربعة وستين عينة من التربة من المواقع الملوثة تقع في بعض المناطق في مدينة بغداد (السكنية والصناعية والتجارية والزراعية والطرق الرئيسية). ثانيا، تم اجراء سلسلة من القياسات على عينات التربة وتحليلها لقياس تراكيز المعادن الثقيلة بواسطة اجهزة الامتصاص الطيف الذري (AAS)، فلورية الاشعة السينية (XRF) المطياف الكتلي البلازمي بالتقارون الحثي (ICP - MS) ومن خلالها نحصل على تراكيز اولية لهذه المعادن الثقيلة. ثالثا، محاكاة وتدريب الشبكات المقترحة للحصول على تركيز المعادن الثقيلة بالطريقة المقترحة ومن ثم مقارنة اداء الشبكات المقترحة مع فحص المختبر التقليدي باستخدام مجموعة بيانات التدريب والاختبار. نتائج هذا العمل تبين ان الشبكات المقترحة والمتدربة على القياسات التجريبية يمكن تطبيقها بنجاح لتقدير تركيز المعادن الثقيلة بسرعة ودقة.اخيرا، نقترح بعض الطرق لمعالجة التربة الملوثة باستخدام بعض النباتات العشبية. | There are many aims of this thesis : The first aim is to develop a model equation that describes the spread of contamination through soils which can be used to determine the rate of environmental contamination by estimate the concentration of heavy metals (HMs) in soil. The developed model equation can be considered as a good representation for a problem of environmental contamination. The second aim of this thesis is to design two feed forward neural networks (FFNN) as an alternative accurate technique to determine the rate of environmental contamination which can be used to solve the model equation. The first network is to simulate the soil parameters which can be used as input data in the second suggested network, while the second network simulates to estimate the concentration of heavy metals. The third aim is to develop a conceptual theory of training stage of neural networks from the perspective of functional analysis and optimization methods. Within this formulation, learning means to solve a variational problem by minimizing a performance function associated to the neural network. The choice of the objective functional depends on the particular application. On the other side, we suggest modification of the performance function to improve the generalization of the suggested networks and to treat the early stopping and local minima problems. The fourth aim is to compare the performance of aforementioned algorithms with regard to predicting ability. Then applied the suggested technique to estimate the concentration of heavy metals such as : Copper(Cu), Lead(Pb), Cadmium(Cd), Cobalt(Co), Zinc(Zn) and Nickel(Ni) in Baghdad soils. First, sixty four soil samples were selected from a phytoremediated contaminated site located in some zones in Baghdad city (residential, industrial, commercial, agricultural and main roads). Second, a series of measurements were performed on the soil samples and analyzed measuring of concentrations for heavy metals using devices such as : Atomic Absorption Spectrophotometer (AAS), X - Ray Fluorescence (XRF) and Inductively Coupled Plasma - Mass Spectrometry (ICP - MS) to get initial concentrations for those heavy metals. Third, simulate and train the suggested networks to get the concentration of heavy metals. The performance of the suggested networks was compared with the traditional laboratory inspecting using the training and test data sets. The results of this work show that the suggested networks trained on experimental measurements can be successfully applied to the rapid and accuracy estimation of concentration of heavy metals. Finally, we suggest some methods contaminated soil by using some herbal plants.

طرق تكرارية كفوءة لحل مسائل القيم الحدودية ذات النقطتين Efficient Iterative Methods for Solving Two - Point Boundary Value Problems

اسم المؤلف: علي حسين عباس
اسم المشرف: مجيد احمد ولي
الموضوع العام: علوم الرياضيات
السنة: 2016
الموضوع الدقيق: الرياضيات
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: قدمت في هذه الرساله ثلاثه طرق تكراريه موثوقه لحل مسائل القيم الحدوديه ذات النقطتين الخطيه وغير الخطيه. الطريقه الاولى تتناول تطبيق الاسلوب الشبه تحليلي لحل هذه المشكله. وفي هذه الطريقه تم الحصول على الحل بشكل متسلسله وبحسابات سهله. ان النتائج التي تم الحصول عليها لقيم الخطا المتبقي تبين ان هذه الطريقه فعاله جدا وموثوقهالطريقه الثانيه هي الطريقه التكراريه المطوره وتسمى DJM لحل هذه المشكله. هذه الطريقه تعطي حلا تقريبيا مع تقارب سريع. النتائج العدديه تثبت ان الطريقه المستخدمه هي طريقه موثوقه وفعاله. اما الطريقه الثالثه والاخيره تسمى طريقه متسلسله القوى لحل هذه المشكله. وهناك بعض الامثله العدديه قدمت لاثبات كفاءه هذه الطريقه وكما استخدمت بعض التطبيقات على هذه المشكله وحلها بواسطه هذه الطرق المذكوره. ان البرنامج المستخدم لايجاد هذه النتائج العدديه هو الماثيماتيك | In this thesis, three reliable iterative methods have been introduced to solve linear and nonlinear two - point boundary value problems (TPBVPs). The first method deals with the implementation of the semi - analytic method namely (TAM) to solve two - point boundary value problems. In TAM, the solution is obtained in the series form with easily computed components. The results of the maximal error remainder values show that the present method is very effective and reliable. The second method namely a new iterative method (NIM or DJM) to solve the TPBVPs. DJM gives an approximate solution with fast convergence. The numerical results prove that the suggested method is reliable and effective. The third and final method is called Power series method (PSM). It is presented to solve TPBVPs. Numerical examples are given to demonstrate the efficiency of the proposed method and some application of TPBVPs will be solved by this methods. The software used for the numerical calculation was MATHEMATICA® 10.0.

بعض طرائق التقدير لمعلمتي توزيع باريتو من النوع الاول باستخدام المحاكاة مع تطبيقات عملية Some Estimation Methods for the Parameters of Pareto type I by using Simulation with Practical Application

اسم المؤلف: عدويه ناجي عطيوي الخشالي
اسم المشرف: حازم منصور كوركيس
الموضوع العام: علوم الرياضيات
السنة: 2016
الموضوع الدقيق: الرياضيات التطبيقية
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تناولت رسالة الماجستير هذه مناقشة العديد من الخصائص الاحصائية لتوزيع باريتو من النوع الاول ذو المعلمتين، كذلك تم التطرق الى العلاقة بين توزيع باريتو وعدد من التوزيعات المستمرة الاخرى.ان الغرض من الرسالة هو مقارنة طريقة بيز القياسية مع اربعة من الطرق التقليدية لتقدير معلمتي الشكل والقياس باستخدام طريقة مونت - كارلو لمحاكاة نماذج مختلفة.وقد تبين من خلال الدراسة ان مقدر بايز افضل من المقدرات الاخرى لتقدير المعالم باستخدام متوسط مربعات الخطا (M.S.E) من اجل المقارنة بين افضلية مقدرات طرائق التقدير المختلفة ولحجوم العينات المختلفة. علاوة على ذلك، تناول الباحث بعض التطبيقات الحقيقية من الحياة والتي تتوزع بعضها توزيع باريتو.تم استخراج النتائج عن طريق كتابة برامج باستخدام برنامج الماتلاب MATLAB R2013b. | In this thesis several statistical properties for Pareto distribution type one with two parameters had been discussed. The relationship of Pareto distribution with many other continuous distributions is also presented. However, the main purpose of this thesis is to compare between standard Bayes method and four classical methods to estimate the shape and scale parameters by using Monte Carlo simulation method for different models. It had been shown that standard Bayes estimator is better than other estimators in the sense of MSE by assuming different sample sizes. Moreover, some real life applications related to Pareto distribution are given. The computer programs are writing and the run is made by using MATLAB (R2013b) professional software.

بعض الطرق التكرارية الموثوقة والكفوءة لحل معادلات دفنك Some Reliable and Efficient Iterative Methods for Solving Duffing Equations

اسم المؤلف: سيل غني عبد الرزاق
اسم المشرف: مجيد احمد ولي
الموضوع العام: علوم الرياضيات
السنة: 2016
الموضوع الدقيق: الرياضيات
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ان الهدف الرئيسي من هذه الرسالة هو حل معادلة دفنك في كلا النوعين قليلة الاهتزاز والمهتزة. في هذه الرسالة هناك طريقتين تكراريتين استخدمتا لحل معادلة دفنك. الطريقة الاولى تسمى الطريقة التكرارية المطورة او (Daftardar - Jafari method (DJM)) والطريقة الثانية تسمى الطريقة شبه التحليلية او (TAM)) Temimi - Ansari method). قد تم حل بعض الامثلة لتوضيح الكفاءة والدقة العالية للطرق المقترحة من خلال النتائج كذلك تمتاز الطرق المقترحة بعدم حاجتها الى متطلبات اخرى. ايضا قد تم مقارنة الطرق المقترحة مع طرق اخرى ناجحة مثل ( الطريقة التغايرية التكرارية ) وطريقة ادومين التي تم ذكرهما لمعرفة فعالية الطرق التي تمت الدراسة من خلالها. الفصل الاول من هذه الرسالة تم التركيز فيه على معادلة دفنك والوجود والوحدانية للحل. الفصل الثاني من الرسالة يتناول تطبيق (الطريقة التكرارية المطورة ) لحل معادلة دفنك قليلة الاهتزاز والمهتزة مع حالات اخرى لمعادلة دفنك. ايضا الطريقة الثانية (الطريقة شبه التحليلية (قد استخدمت في الفصل الثالث لحل معادلة دفنك في نوعيها قليلة الاهتزاز والمهتزة وكذلك حل حالتان خاصة من معادلة دفنك. في الفصل الرابع تم ذكر تطبيقين على معادلة دفنك وقد تم حلهم الطريقة التكرارية المطورة, الطريقة شبه التحليلية, طريقة ادومين وطريقة التغاير التكرارية.في الفصل الخامس قمنا بعرض مقارنة بين الطريقة التكرارية المطورة, الطريقة شبه التحليلية, طريقة ادومين وطريقة التغاير التكرارية وتم كذلك عرض بعض الاستنتاجات والاعمال المستقبلية وقد تمت الحسابات باستخدم برنامج (الماثيماتيكا) الحاسوبي. | The main aim of this thesis is to solve the two types of Duffing equations : damping and undamping. In this thesis two iterative methods are used for solving Duffing equations. The first method is called new iterative method (NIM) or Daftardar - Jafari method (DJM) and the second method is called semi analytic technique or Temimi - Ansari method namly (TAM). Some examples will be solved to show that the proposed methods are efficient and have high accuracy and does not require any restrictive assumptions. Also, the comparison with some other existing methods, such as variational iteration method (VIM) and Adomain decomposition method (ADM) will be presented to demonstrate the effective of the presented methods. The first chapter of this thesis will be focuse of on some basic concepts of the Duffing equations, existence and uniqueness solution. The second chapter deals with the implementation of the new iterative method (NIM) to solve the damping and undamping Duffing equations and other cases of Duffing equations. Also, the second method semi analytic technique used in third chapter for solve that two types of Duffing equations damping and undamping with other cases of Duffing equations. In chapter four, we state two application of Duffing equation and solve them in DJM, TAM, ADM and VIM. In chapter five we presented the comparison between DJM, TAM, ADM and VIM and, present conclusions and future work. The used software of the contained calculations in our study is Mathematica 9.

مقارنة بين خوارزميات البحث المحلي لمسائل الجدولة متعددة الاهداف A Comparison of Local Search Algorithms for Multicriteria Scheduling Problems

اسم المؤلف: سالي عدنان علي
اسم المشرف: طارق صالح عبد الرزاق
الموضوع العام: علوم الرياضيات
السنة: 2016
الموضوع الدقيق: الرياضيات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الرسالة درست مسالة جدولة n من الاعمال على ماكنة واحدة ولتصغير الدالة لمجموع اوقات الاتمام∑Ci) (مع مدى التاخير(RL).في المسالة الرئيسية 1//(∑Ci,RL) اقترحنا وطبقنا العديد من الخوارزميات (المثلى والتقريبية) التي تعطي المجموعة التقريبية للحلول الكفوءة لاول مرة لهذه المسالة. بعض النتائج التجريبية عرضت تطبيق الخوارزميات المثلى والبحث المحلي وخلال فترة زمنية معقوله ، خوارزميات البحث المحلي يمكن ان تحل المسالة حتى 900 عمل. يتم تحسين اثنين من متعددة اهداف خوارزميات البحث المحلية MOVNS2 وMOVNS3 وتعطي نتائج افضل من Geiger خوارزمية .MOVNS1 وكذلك وضعنا وبرهنا بعض المقترحات لايجاد الحلول الكفوءة .وفي المسالة الخاصة 1//Lex(∑Ci,RL) اقترحنا خوارزمية ((AP1 التي تعطي الحل الافضل للمسالة. اما في المسالة الخاصة 1//Lex(RL , ∑Ci) اقترحنا خوارزمية (MLH) وهي تطوير لخوارزمية (LH) لايجاد افضل نتائج للمسالة .وفي المسالة الخاصة 1// (∑Ci+RL) فقد وجدنا الحل الامثل او حل قريبا من الحل الامثل للمسالة بدون استخدام طريقة التفرع والتقيد (BAB) ، حصلنا على هذه الحلول من مجموعة الحلول الكفوءة للمسالة الرئيسية . | In this thesis, the problem of scheduling n jobs on a single machine with objective to minimize a function of total completion times (∑Ci) and range of lateness (RL) is examined. For the main problem 1//(∑Ci , RL), we propose and apply several (exact and approximate) algorithms, which give approximate set of efficient solutions, for the first time for this problem. Some experimental results are presented to show the applicability of the exact and local search algorithms. With a reasonable time, local search algorithms can solve the problem up to (900) jobs. Two multi - objective local search algorithms MOVNS2 and MOVNS3 are modified and give better results than that of Geiger algorithm MOVNS1. As well as we state and prove some propositions for finding efficient solutions. For the problem 1//Lex(∑Ci , RL), we propose an algorithm (AP1), which gives the best solution for it. For the problem 1//Lex(RL , ∑Ci), we propose an algorithm (MLH) which is a modification of the algorithm (LH) to find the best result for it. For the problem 1//(∑Ci + RL), we find the optimal or near optimal solution for it, without using branch and bound (BAB) method, we get these solutions from the set of efficient solutions of the main problem

تقدير دالة البقاء باستعمال دالة الرتب مع درجة عضوية شبة المنحرف لتوزيع ويبل Estimation of Survival Function by using Ranking Function with Trapezoidal Membership for Weibull Distribution

اسم المؤلف: زهراء فوزي جاسم
اسم المشرف: ايدن حسن حسين الكناني
الموضوع العام: علوم الرياضيات
السنة: 2016
الموضوع الدقيق: الرياضيات
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تبحث هذه الدراسة في تقدير معلمتي الشكل والقياس لتوزيع ويبل باستخدام طريقه الامكان الاعظم Maximum Likelihood)) والاعتماد على طريقة نيوتن رافسن ,ثم تطبيق دالة البقاء Survival Function )) ودالة المخاطره Hazard Function)) لتقدير نقطه.لذلك مما يجعل الضبابيه لتقدير الفترات لمعلمات الشكل والقياس ياستخدام درجه عضويه شبه المنحرف الخطيه ,والطريقه المقترحه لايجاد الارقام الضبابيه الاخرى باستخدام (μ - σ^2) (μ+σ^2)للداله عضويه درجه شبه المنحرف الخطيه , واستخدامنا اثنين من الخوارزميات لايجاد دالة الرتب لدرجه عضويه شبه المنحرف الخطيه لايجاد قيمه واحده للمعلمات وكذلك اقتراحنا اثنين من الخورازميات الجديده لايجاد دالة الرتب لدرجه شبه المنحرف لايجاد قيمه واحده للمعلمات .ثم حساب دالة الكثافه الاحتماليه ودالة البقاء ودالة المخاطره بالنسبه للمرضى الذي يعانون من سرطان الدم اللمفاوي الحاد . واخيرا,تمت المقارنه بين الخوارزميات الخمسه باستخدام الحد الادنى لمتوسط المربعات للخطا (Mean squares error )ويستخدم الحد الاقصى (Mean time to failure)ومتوسط الوقت اللازم Median time to failure)) باستخدام عينه مختاره من المرضى الذي يعانون من المرض ,وحصلنا في دراستنا ان الخورازميه الثانيه والخورزميه الثانيه المقترحه حصلنا من خلالهما على افضل النتائج. | The present study examines the estimation of shape and scale parameters for Weibull distribution by using the maximum likelihood estimator method and relying on the Newton - Raphson method, then applying the crisp survival function and crisp hazard function to estimation of point.The interval estimation be used in shape and scale parameters employing the fisher information matrix.Therefore, making fuzzfies of interval estimation for shape and scale parameters by using a grade of linear trapezoidal membership, a new proposed technique used to find the fuzzy numbers for two parameters by utilizing (μ - σ^2) and (μ+σ^2) to make a linear trapezoidal membership function. The two functions of algorithms ranking function for a trapezoidal membership to find one value only as well as employing two new proposed algorithms of ranking function method be use depending on linear and general grade of trapezoidal membership for shape and scale parameters. Then computing the probability density function, survival function and hazard function for patients who suffer of acute lymphocytic leukemia disease for two algorithms of ranking function and two new proposed algorithms of ranking function. Finally, the five algorithms of the ranking function were compared by using the minimum mean squares error criterion, the Maximum mean time to failure and median time to failure criterions are used from, selected sample from patients who suffer of leukemia disease we get in the study result the second algorithm and the new second algorithm the best

ضغط اشارة البيانات بواسطة معكوس مصفوفة هار ومعكوس تحويل هار Signal Data Compression by Means of Inverse Haar Matrix and Inverse Haar Transformation

اسم المؤلف: ريم طالب ميري
اسم المشرف: حسين علي حسين
الموضوع العام: علوم الرياضيات
السنة: 2016
الموضوع الدقيق: الرياضيات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ضغط الصورة يتضمن تقليل حجم ملفات الصور مع الاحتفاظ بالمعلومات الضرورية. الضغط هو عملية ضرورية واساسية لتكوين ملفات الصور ذات الحجوم القابلة للنقل. يوجد العديد من طرائق الضغط لكن هذه الرسالة تستخدم ضغط الصور بالاعتماد على معكوس مصفوفة هار ومعكوس مصفوفة التحويل لهار. وفي الطريقة المقترحة يتم ضغط الصورة الرمادية ضغطا بدون ضياع البيانات وضغط الصورة الملونة ضغطا بضياع البيانات ، والهدف من هذا الضغط هو تقليل حجم الصورة وتمثيلها باصغر عدد ممكن من وحدات القياس. بالتالي يمكن ان تسهل نقل ومعالجة الصور. الصورة تحتوي على كميات كبيرة من البيانات عند تنزيلها من الانترنت، (انه يتطلب الكثير من مساحة التخزين، والوقت واتصال انترنت سريع). ويمكن تخفيض عبء العمل هذا اذا تم ضغط البيانات. على سبيل المثال، صورة رمادية من حجم 512 × 512 لديها 262144 عنصر وصورة ملونة من حجم 512 × 512 لديها 786432عنصر للتخزين. عند استخدام اساليب الضغط، يمكننا ان نضغط نقاط الشاشة ، ولكن نوعية صورة ملونة تتاثر قليلا. عندما ينقر على الصورة للتحميل، يتم استدعاء نقاط الشاشة لذاكرة الحاسوب. وقد تم قياس اداء هذه الطريقة باستخدام نسبة قمة الاشارة الى الضوضاء (PSNR)، متوسط مربع الخطا (MSE) ونسبة الضغط (CR). واستخدمنا لقياس جودة الصورة المسترجعة عاملين هما العتبة ونسبة قمة الاشارة الى الضوضاء (PSNR). وتم التطبيق على الصور الملونة والرمادية ذات ابعاد512 ×512 ومن الصور الرمادية بصمة الاصبع والاشعة السينية وجميع الحسابات اجريت باستخدام . MATLAB R2015b | Image compression involves reducing the size of image data files, while retaining necessary information. Compression is a necessary and essential method for creating image files with manageable and transmittable sizes. There have been many types of compression Technique , but this thesis exploits image compression based on inverse Haar matrix and inverse Haar transform matrix. In the proposed method , the grayscale image has been compressed lossless while RGB image has been compressed lossy, the goal of this compression is to reduce size of image and to represent it with the smallest possible number of bits. It can facilitate the transmission and processing of image. An image contains large amounts of data when downloaded from internet, (it requires much storage space, time and fast internet connection). This workload can be reduced if the data is compressed. For instance, a grayscale image of size 512 × 512 has 262144 elements and color image of size 512 × 512 has 786432 elements to store. By using the compression methods, we can compress the pixels , but the color image quality is affected a little. When someone clicks on an image to download, the computer recalls the pixels to the computer memory. The performance of this method has been measured by using Peak Signal to Noise Ratio (PSNR), Mean Square Error (MSE) and Compression Ratio (CR) .The measure of the decompressed image quality is based on two factors ; the threshold and Peak Signal to Noise Ratio (PSNR). Some illustration have been made to justify the proposed approach for gray and color images of size (512× 512) pixels (dimension of the image). Both fingerprint and X - ray have been tested. All programs have been coded using MATLAB R2015b.

تقدير معالم تعميم معكوس التوزيع الاسي بالضبابية Estimating the Parameters of Generalized Inverted Exponential Distribution with Fuzziness

اسم المؤلف: حوراء جواد كاظم علي
اسم المشرف: قتيبة نبيل نايف القزاز
الموضوع العام: علوم الرياضيات
السنة: 2016
الموضوع الدقيق: المجموعات الضبابية
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يعد معكوس التوزيع الاسي المعمم من التوزيعات المهمة في دراسة اوقات الفشل والتي لها تطبيقات واسعة في المجالات الطبية والصناعية. وفي هذه الرسالة تم تقدير معلمتي الشكل والقياس لهذا التوزيع ولكن بعد ازالة الضبابية التي تتصف بها بياناته اذ ان بياناته عبارة عن اعداد ضبابية ثلاثية ولتحويلها الى اعداد اعتيادية تم استعمال دالة الرتب والتي تم تعريفها وايضاح خصائصها واقتراح تعميم لطريقتين من طرائقها(graded mean and centroid ) وايجاد العلاقة بين الطريقتين المعممتين واثبات هذه العلاقة من خلال تطبيق خمس حالات خاصة منهما وهذه الحالات تعد الاكثر شيوعا في ازالة الضبابية.تم تقدير معلمتي هذا التوزيع وفق ثلاث طرائق وهي، طريقة الامكان الاعظم، طريقة المربعات الصغرى، والطريقة البيزية، وبما ان التوزيع المدروس ذو معلمتين فكان من الصعوبة الفصل بين المعلمتين وتقديرهما بشكل مباشر في كل من طريقتي الامكان الاعظم والمربعات الصغرى. لذا تم الاستعانة بطريقة نيوتن رافسون التكرارية من خلال فرض قيم اولية ومن ثم التقدير الى ان تم الحصول على اقل فرق ممكن بين التقديرين الحالي والسابق لكلا المعلمتين. اما في الطريقة البيزية فقد تم فرض توزيع كاما كتوزيع اولي لمعلمتيه ومن ثم استعمال دالة الخسارة التربيعية وبالاعتماد على خوارزمية Metropolis - Hastingالتي تتطلب تحديد توزيعين (توزيع توليد اولي، وتوزيع مقترح) لايجاد مقدرات بيز لكلا المعلمتين بعد 5000 دورة للتجربة الواحدة. وتم توليد عينات مختلفة لتمثل المجتمع المدروس وفق معكوس دالة الاحتمال التراكمي بالاعتماد على اسلوب المحاكاة. وبعد تقدير معلمتي التوزيع ومقارنة نتائج طرائق التقدير وفق مقياس متوسط مربعات الخطا. تم التوصل الى ان افضل طريقة كانت طريقة الامكان الاعظم تليها الطريقة البيزية واخرها طريقة المربعات الصغرى والتي كانت الابطا من ناحية الحصول على نتائج مستقرة. | The generalized inverted exponential distribution is considered as one of the most important distributions in studying failure times and has a wide application in medical and industrial fields. In this thesis, a shape and a scale parameters of the distribution have been estimated after removing the fuzziness that characterizes its data because they are triangular fuzzy numbers. To convert the fuzzy data to crisp data the researcher has used the ranking function methods to define and clarify their characteristics. She also has proposed a generalization of two methods (graded mean and centroid) and found a relationship between them; this relationship has been proved through applying five special cases of them that are considered the most common cases in fuzziness removal.The distribution parameters have been estimated according to three estimation methods : maximum likelihood, ordinary least squares and Bayesian methods. Hence the studied distribution has two parameters which show a difficulty in separating and estimating them directly in both of the MLE and OLS methods. The Newton - Raphson iteration method has been used by assuming initial values, and then estimating them reach the minimum possible difference between the current and previous values. For the Bayesian method, the gamma distribution has been proposed as a prior distribution for the two parameters with a quadratic loss function by using Metropolis - Hasting algorithm that requires specifying two distributions (random generating distribution and proposal distribution) to find the parameters Bayesian estimators after 5000 iterations for each experiment.Different samples have been generated according to the inverted cumulative distribution function to represent the population under study by using simulation approach. After estimating the parameters, the results of the three methods have been compared according to the Mean Squared Error measurement. And the researcher concluded that the best estimation method is the MLE followed by the Bayesian, and lastly is the OLS which is the slowest even in getting stationary results.

التذبذب والسلوك المحاذي لحلول المعادلات التفاضلية التكاملية المحايدة من الرتبة الاولى والثانية Oscillation and Asymptotic Behavior of Solutions of First and Second Order Neutral Integro - Differential Equations

اسم المؤلف: تغريد حسين عبد
اسم المشرف: حسين علي محمد
الموضوع العام: علوم الرياضيات
السنة: 2016
الموضوع الدقيق: المعادلات التفاضلية
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: الهدف من هذه الرسالة هو تعميم وتوسيع للنتائج التي توصل اليها (olach) في بحثه الذي نشره سنة (2005), حيث انه قد درس وجود حل موجب وكذلك درس تذبذب كل حلول المعادلة التفاضلية التكاملية التباطؤية, وقد استخرج بعض الشروط الضرورية والكافية لضمان تذبذب حلول المعادلة التفاضلية التكاملية التباطؤية. في هذه الرسالة تمت دراسة المعادلة التفاضلية التكاملية المحايدة من الرتبة الاولى, حيث اننا صنفنا فيها المعادلة التفاضلية التكاملية المحايدة الى اربعة انواع, وقد تم استخراج شروط ضرورية وكافية لضمان تذبذب حلول هذه المعادلات, وكذلك شروط ضرورية وكافية اخرى لضمان تقارب جميع الحلول لهذه المعادلات الى الصفر او تباعدها. بالاضافة الى ذلك, اربعة انماط من المعادلات التفاضلية التكاملية المحايدة من الرتبة الثانية قد تمت دراستها, وقد تم استخراج شروط ضرورية وكافية لضمان تذبذب حلول هذه المعادلات, وكذلك شروط شروط ضرورية وكافية اخرى لضمان تقارب جميع الحلول لهذه المعادلات الى الصفر او تباعدها. وقد تم عرض بعض الامثلة لتوضيح النتائج التي تم الحصول عليها. | The aim of this thesis, is to generalized and extended the results of the paper : Olach (2005)[24]. Where he study the existence of positive solution and the oscillation of all solution of delay integro - differential equation, where he extracted some necessary and sufficient conditions to grantee the oscillation of all solutions of delay integro - differential equation. In this thesis, it has been studied neutral integro - differential equation of the first order, where we classify four types of neutral integro - differential equation and extracted necessary and sufficient conditions for these types to ensure the oscillation and the convergence to zero or divergence for all solutions of these equations. Moreover, four types of neutral integro - differential equations of the second order has been studied and obtained some necessary and sufficient conditions to ensure the oscillation of all solutions to this equation, and another necessary and sufficient conditions obtained for all solutions to converge to zero or diverge as t tends to infinity. Some examples are included to illustrate the obtained results.

استخدام تحويل فورييه وتحويل المويجة لحل نوع معين من المعادلات التفاضلية الجزئية Using Fourier Transform and Wavelet Transform for Solving Certain Type of Partial Differential Equations

اسم المؤلف: الاء صباح العيبي
اسم المشرف: الاء صباح العيبي
الموضوع العام: علوم الرياضيات
السنة: 2016
الموضوع الدقيق: المعادلات التفاضلية
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The main theme of this thesis is oriented toward three objectives : The first objective is to study the application of wavelet transform in numerical analysis and solving partial differential equations. The second objective is to find the numerical solution for the one - dimensional heat equation using Chebyshev wavelets tau method, the problem under the proposed technique is reduced to the solution of a system of linear algebraic equations. Also, the solution obtained by this approach is tested by some illustrative examples and the efficiency of the proposed modified method is confirmed through several numerical examples. The third objective is to show, the accuracy for the wavelet transform solution obtained rather than implementing the well - known Fourier transform.

بعض انواع من المقاسات المنضغطه والمنكمشه Some types of Retractable and Compressible Modules

اسم المؤلف: اسراء حسن مسلم
اسم المشرف: ليلى سلمان محمود
الموضوع العام: علوم الرياضيات
السنة: 2016
الموضوع الدقيق: الرياضيات
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: لتكن R حلقة ابداليه ذات عنصر محايد, ولتكن M وN مقاسات يساريه احاديه على R. ولتكن〖Hom〗_R (M,N) مجموعة كل التشاكلات المقاسية من M الى N. من المعروف ان خواص وتمييزات 〖Hom〗_R (M,N) كمقاس على R ممكن ان تحدد عن طريق خواص وتمييزات R, M وN وكذلك بعض خواص وتمييزات R, M وN ممكن ان تحدد عن طريق خواص وتمييزات〖Hom〗_R (M,N), لذا فان العديد من الباحثين اهتموا بدراسة 〖Hom〗_R (M,N) . بعض الدراسات تركزت حول استخدام خاصية 〖Hom〗_R (M,N)≠0 لكل مقاس جزئي N غير صفري من M في هذه الحاله يطلق على M بانه مقاس المنكمشة, بينما اذا كان كل مقاس جزئي غير صفري من M يحوي على نسخة لـ M بمعنى انه يوجد تشاكل متباين في مجموعة 〖Hom〗_R (M,N) فيطلق على M بانه مقاس منضغط, من الواضح ان صنف المقاسات المنضغطه محتوات فعليا في صنف المقاسات المنكمشة. في هذا العمل سوف نعطي دراسة مفصلة حول المقاسات المنضغطه الصغيرة والمقاسات المنكمشة الصغيرة, فضلا على ذلك، اعمامات اخرى للمقاسات المنضغطه والمقاسات المنكمشة تم تقديمها ودراستها مثل المقاسات المنضغطه النقية والمقاسات المنكمشة النقيه, واخيرا المقاسات

تعديل قيم الموجودات على وفق المعايير الدولية وانعكاسـه على مؤشرات الاداء لعينة من المصارف التجارية العراقية Adjustment of Assets Values in Accordance with the International Standards and its Reflection on the Performance Indictors for a Sample of Iraq Trade Banks

اسم المؤلف: زينب صبحي عباس الخزرجي
اسم المشرف: عماد صبيح فرج الصفار
الموضوع العام: الادارة والاقتصاد
السنة: 2016
الموضوع الدقيق: المحاسبة
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في ضوء تبني معظم دول العالم انشطة وممارسات اقتصادية اساسها العولمة، ظهرت الحاجة الى الاعتماد بدرجة كبيرة على معايير المحاسبة الدولية. وفي ظل هذه العوامل والمتغيرات يهدف هذا البحث الى اظهار صوره كمية (رقمية) لمقدار ما يمكن ان يطرا من تغيرات في قيم بعض من الموجودات التي امكن تحديد قيمة لها على وفق معايير المحاسبة الدولية ، مع بيان انعكاس تلك التغيرات على مؤشرات الاداء التي تشتق قيمها من القيم المنسوبة الى تلك الموجودات، كذلك بحث مديات رفع مستوى مهنة المحاسبة داخل البلد وبما يناظر او يكافئ المستوى الدولي، وجاءت اهمية البحث من كونه يتناول معرفه التطورات الحاصلة في معايير المحاسبة وكيف يتم توجيهها نحو خدمة الوحده الاقتصادية والجهات الخارجية من اجل قياس افضل لكافه الاحداث والمعاملات الناجمة عن العمليات الاقتصادية فضلا عن التغيرات التي تحصل في قيمة الموجودات اذا ما تم تعديلها وقياسها على وفق تلك المعايير وانعكاس ذلك على مؤشرات الاداء المعتمدة عليها، وقد اتبع البحث المنهج الوصفي (التحليلي) في عملية المقارنة بين المؤشرات المالية المعدة من قبل المصارف عينة البحث على وفق نظام المحاسبة التقليدي والمؤشرات المالية المعدة على وفق النظام المحاسبي الدولي لابراز اهم الفروقات الحاصلة على تلك المؤشرات، وتوصل البحث لعدة استنتاجات منها ان التحول الى تطبيق معايير المحاسبة الدولية بات امرا واقعا سيما بعد اصدار البنك المركزي العراقي تعليمات بالعدد 12/9 بتاريخ 4/1/2016 والتي تقتضي بهذا التحول، كذلك تبين من خلال تحليل مؤشرات اداء المصارف عينة البحث بعد تعديل قيم استثماراتها بالاوراق المالية وموجوداتها الثابتة من العقارات على وفق القيمة العادلة في ضوء المعايير الدولية، ان هذا التعديل بشكل عام ذو تاثير نسبي صغير. تعتقد الباحثة ان ذلك يعد مؤشرا على ضعف كفاءة استغلال هذه الموجودات بما يناظر قيمتها العادلة. اوصت الباحثة ومع ترسيخ القياس على وفق المعايير الدولية بدراسة تاثير هذه التغيرات بالقياس في مؤشرات الاداء ضمن نطاق اوسع من عناصر القوائم المالية من قبيل الموجودات غير الملموسة واختبارات التاكل، كذلك ضرورة اتخاذ ادارات المصارف عينة البحث قرارات تحسن من استغلال الموجودات بما يعزز من تحقيق صافي ربح تشغيلي يغطي كلفة الاستثمار من هذه الموجودات ويحقق قيمة اقتصادية مضافة موجبة توفر فائضا مرضيا لاصحاب الحقوق. | The urgent need appeared to be depended largely on standards of international accountancy owing to adopting most of states globalization - based activities and economic practices. Under these conditions , the current research aims at bringing out numeric picture of what happened of changes on values of some assets that could be specified according to the international accountancy standards, with showing the reflection of these changes on indications of performance its values derived from the values affiliated to these changes . The current study aims at raising level of accountancy inside the country ,the importance of research lies in knowing the developments happened in scales of accountancy and how to direct them toward serving the economy Unit and other directions for measuring all events and transactions ensued from the economic processes , as well as changes occurred in values of assets if only being measured and amended according to the standards. The current research has followed up descriptive , analysis method in process of comparison among the financial indications prepared by the banks based on the traditional accountancy system and financial indications prepared according to the international accountancy system for bringing out the differences of these indications. The research has included most important conclusions, including , the conveyance into applying international accountancy standards , especially after having the central bank of Iraq issue instructions No. 12/9 on 14/1/2016 , regarding the transferring into the international standards . It also indicates, via analyzing indications of performance of banks, sample of the research after amending its investment values with the securities and its consistent assets in respect to real estates. This amendment is of relative effect. The researcher thinks that this amendment has been considered as an indicator of the weak efficiency of exploiting these assets. The researcher has recommended to boost the measurement according to the international standards by studying the effect of these changes on indications of performance within huge domain of financial elements; besides, it is necessary to take banks managements as a sample for the research, select decisions that improve the exploitation of assets. This actually leads to bolster to achieve operation profit that covers the cost of investment from these assets and to fulfill added positive economic value that provides willing surplus

تاثير اضافة Al2O على الخصائص الكهربائية للفارستور من نوع ZnO The Effect of (Al2O3) Additive on Electrical Properties of (ZnO) - Based Varistor

اسم المؤلف: عباس فاضل شنون
اسم المشرف: ايسر جمعة ابراهيم
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ZnO based varistor samples having composition formela as shown below : - (X) is a variable take values (X = 0 , 0.1 , 0.5 , 1) % mol were prepared by a solid state reaction and sintered in air at a different sintering temperatures (1000,1100 and 1200)ᴼC for 2h by a heating rate of (5ᴼC. min - 1). The microstructure and electrical properties of sintered samples were investigated by using X - ray diffraction (XRD), energy dispersive spectroscopy (EDX), scanning electron microscopy (SEM), as well as electrical meas urements. XRD analyses showed that the crystallite size was decreased with the increase of Al2O3 concentration while it was increased with the increase of sintering temperature. Also from SEM images and by using linear intercept method we note that the grain size decreases with the increase of Al2O3 concentration while it increases with the increase of sintering temperature. Since the breakdown voltage is influenced by the size and the number of grains , so it was increased with the increase of Al2O3 concentration at certain sintering temperature to reach (2220V) at sample contains (1% of Al2O3) and sintered at 1000ᴼC for 2h, this is due to form a spinal phase (ZnAl2O4) which inhibits the grain growth.Also the breakdown voltage was decreased with the increase of sintering temperature at certain Al2O3 concentration to reach (255V) at sample sintered at 1200ᴼC for 2h and contains (0.1% l of Al2O3).By plotting the (J - E) curves of varistor samples we can notes that the adding of (0.1 and 0.5) % of Al2O3 dopants enhances the nonlinear behavior of ZnO varistor by increasing the nonlinear coefficient to reach its maximum values (46, 48) respectively which are sintered at 1000ᴼC for 2h, while the increase of Al2O3 concentration to(1% ) decreases the nonlinear coefficient to (29.2) which are sintered at 1000ᴼC for 2h .Compound ZnO Bi2O3 Sb2O3 CoO MnO2 Cr2O3 Al2O3 % mol 96.5 - X 0.7 1 0.8 0.5 0.5 X The increase of sintering temperature decreases the nonlinear coefficient to reach its minimum values (6.9, 8) at samples sintered at 1200ᴼC for 2h and contain a different amounts of Al2O3 concentration, this is due to the bad volatilization of bismuth that insured by (EDX) test.The leakage current was increased with the increase of both Al2O3 concentration and sintering temperature to reach its maximum value (0.33mA) at a sample which contains (1% ) of Al2O3 concentration and sintered at 1200ᴼC for 2h, that is because the Aluminum increases the free electrons (donor density ) at the conduction band.Deilectric constant decreases with the increase of the frequancy of the applied voltage for the samples which containe 0.1% of Al2O3 and sintered at (1000 and 1200)ᴼC for 2h and for the sample contain 1% of Al2O3 and sintered at 1000ᴼC, the deilectric constant decreases with the increase of sintering temperature while tangent factor increases with the increase of Al2O3 concentration, this is due to the increase of leakage current.

دراسة نظريه للاستطارة الالكترونيت للنوى 59Co, 61Ni, 63Cu , 65Cu Theoretical Study of Electron scattering from 59Co, 61Ni, 63Cu and 65Cu nuclei

اسم المؤلف: ياسمين حسن كاظم
اسم المشرف: الطاف عبد المجيد الرحماني
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: فيزياء الالكترونيات
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The nucleon momentum distributions NMD and the elastic longitudinal form factors F(q) for the electron scattering of the ground state for some odd mass nuclei in the 1f - 2p shell, such as 59Co, 61Ni, 63Cu and 65Cu have been derived and calculated by using the Coherent Density Fluctuation Model CDFM and expressed in terms of the fluctuation function (weight function)| . The fluctuation function has been related to the nucleon density distributions NDD of the nuclei and determined from the theoretical and the experimental results. The property of the long - tail manner at the high momentum region of the nucleon momentum distributions has been obtained by both the theoretical and experimental fluctuation functions on contrary to the results of the nucleon momentum distributions derived and calculated in the shell model by taking Fourier transform to the harmonic - oscillator wave functions that are mainly characterized by the steep slope behavior at high momentum values. The experimental form factors of all nuclei under study are in reasonable reproduced by the present calculations for all the values of momentum transfer .

تحضير ودراسة خواص الخلية الشمسية المفعلة بالصبغه بطريقة الترسيب بالليزر النبضي Preparation and Characteristics Study of Dye Synthesized Solar Cell by Pulsed Laser Deposition

اسم المؤلف: وسن جبار طاهر
اسم المشرف: سمر يونس الدباغ سؤدد سلمان احمد
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: دكتوراه
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: هذا العمل يركز على تصنيع الخلايا الشمسية المفعلة بالصبغه باستخدام مادة شبه موصله من نوع P بدل من استخدام السائل لغرض معالجة بعض المشاكل منها معالجة التسرب في السائل المستخدم. الى جانب ذلك، فقد تم دراسة وتحضير المواد النانوية التي تلعب دورا هاما في اداء هذا النوع من الخلايا الشمسية, حيث ان هذه المواد القابليه على تحقيق كفاءة تحويل عالية مع الحفاظ على البساطة والكلفة المنخفضة. تتكون الخليه الشمسيه من (ITO/ TiO2 or ZnO /Ru /CuI/ Ag) حيث تم ترسيب المواد النانويه المستخدمه في هذا العمل بواسطة استخدام تقنية الترسيب بالليزر النبضي. واجريت الفحوصات التركيبيه والبصرية والكهربائية لجميع المواد النانويه المستخدمه في تحضير الخليه الشمسيه وكذلك دراسة تاثير عدد نبضات الليزر نيديميوم, التلدين وكفاءة الخليه الشمسيه : - تم فحص اغشية اوكسيد التيتانيوم واوكسيد الزنك النانويه بواسطة حيود الاشعه السينية (XRD) وجد ان تركيبها يتغير من العشوائي الى متعدد التبلور عند التلدين بدرجة حرارة o C450 . اما اغشية ايوديد النحاس فكانت متعددة التبلور بدرجة حرارة الغرفه.اظهرت دراسة طبوغرافية السطح لجميع الاغشية المحضرة بان حجم الحبيبات يزداد وكذلك خشونة السطح تزداد بزيادة عدد نبضات الليزر المسلطه وكذلك زيادة درجة الحرارة.من خلال فحص الخصائص البصريه لجميع الاغشية المحضره وجد ان الامتصاصية تزداد بزيادة عدد نبضات الليزر وكذالك عند زيادة درجة الحرارة.قياسات هول اثبتت ان اغشية اكسيد التيتانيوم واكسيد الزنك هي من نوع n - type بينما اغشية ايوديد النحاس فهي من نوع p - type . تم ملاحظة ان كثافة حاملات الشحنه تزداد وتحركيه هول تقل بوضوح مع زيادة عدد نبضات الليزر.تم تصنيع القطب الضوئي للخلايا الشمسيه المفعلة بالصبغه من مادة اوكسيد التيتانيوم واوكسيد الزنك النانويه, حيث لوحظ في حالة وجود اوكسيد التيتانيوم او اكسيد الزنك فان القطب الضوئي يعتمد على زيادة عدد النبضات وبالتالي اعتماد كفاءة الخليه الشمسية على عدد النبضات بسبب زيادة السمك, حيث لوحظ عندما كان عدد النبضات المسلطة 200 نبضه فان كفاءة الخليه الشمسيه كانت %2.115) ) وعندمزااد عدد النبضات الى 800 نبضه زادت كذالك كفاءة الخليه الشمسيه الى ( 5.654%) . ان مادة اوكسيد التيتانيوم هي افضل من اوكسيد الزنك حيث كانت كفاءة الخليه في حالة استخدام مادة التيتانيوم اعلى من كفاءة الخليه في حالة استخدام مادة اوكسيد الزنك حيث لوحظ عند استخدام 800 نبضه بلغت كفاءة الخلية الشمسية الى 5.654% في حالة استخدام مادة اوكسيد التيتانيوم ولكن انخفضت الكفاءة الى 4.231% عند استخدام مادة اوكسيد الزنك. وايضا تم وضع مادة ايوديد النحاس مع اوكسيد التيتانيوم ومع اوكسيد الزنك وكان اوكسيد التيتانيوم افضل من اوكسيد لزنك نتيجة لزيادة الكفاءة. | In a solid state dye - sensitized solar cell the electrolyte is replaced by a p - type semiconductor avoiding problems of leakage of liquid electrolytes. During this work the solar blend from (ITO / TiO2 or ZnO/ Ru / CuI / Ag) is fabricated. The thin films were prepared by pulse laser deposition (PLD) technique and deposited on (ITO) glass substrate. The structural, optical and electrical properties of all samples where studied. XRD analysis indicated that the structure of TiO2 and ZnO thin film change from amorphous to polycrystalline if annealed to 450 Co . XRD analysis shows the CuI at room temperature is polycrystalline. The morphology of surface, found the grain size and roughness of TiO2, ZnO and CuI thin film increase as the number of Nd : YAG laser pulse and temperature increased. Optical properties investigation of TiO2, ZnO and CuI thin film showed that as the number of Nd : YAG laser pulse and temperature increase that lead to increase in absorption. Hall effect measurement prove that TiO2 and ZnO are N - type while CuI is P - type semiconductor, as the number of Nd : YAG laser pulses and temperature increase the carrier concentration nH increase while the mobility µH decrease. The I - V characteristics of the fabricated solar cell is measure , it can be noticed that the photocurrent collected from the TiO2 or ZnO is depending on the number of pulses. The increase in the number of the pulses resulting increase in the photocurrent, indicating the dependence of current collection efficiency on number of pulses. In the same material (TiO2) can be noted the number of pulses equal to 200 the conversion efficiency equal to 2.115 % while increase number of pulse to 800 pulse the conversion efficiency increase up to the 5.654 % from this value it can be observed the conversion efficiency increases when the number of the pulses increasing. Also when using ZnO material it observed that the conversion efficiency depend on the number of pulses when the number of pulses equal to 200 the conversion efficiency equal to 1.144 % while increasing the number of the pulses to 800 pulse the conversion efficiency increase up to the 4.231%, as well as when use TiO2 the efficiency increase more than the with use the ZnO. It can be observed that the use of CuI in solar cell the efficiency depend on the number of pulses , increase with increasing number of pulses. I - V parameter of the solar cell with different number of pulse for CuI thin film, can be observe when use the CuI with TiO2the conversion efficiency is higher from the use CuI with ZnO, the value of conversion efficiency when use CuI with TiO2 at 800 pulses up to rage 5.192%, while when use CuI with ZnO the value of conversion efficiency at 800 pulse equal to 3.654% from this value can be conclusion the efficiency of the TiO2 is up from the efficiency of ZnO

مقارنة نظرية بين HgCdTe وAlGaAs لنظامي البئر الكمي الليزري ذو التركيبين غير المتجانسين Theoretical Comparison between HgCdTe and AlGaAs Heterostructure Quantum Well Laser Systems

اسم المؤلف: وديان كاظم عبد الزبيدي
اسم المشرف: ابتسام محمد تقي سلمان
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: هذا البحث يصف مقارنة نظرية بين نظامي ولليزر البئر الكمي ذو التركيب غير المتجانس. حيث تم دراسة تاثير العوامل المختلفة لهذا التركيب مثل عرض البئر وعرض الحاجز للبئر الكمي المفرد والمتعدد على عوامل الليزرمثل عامل التقيد البصري وتيار العتبة وكثافة تيار العتبة والربح البصري وقدرة الخرج والكفاءة . بالاضافة الى دراسة كثافة الحالات للبئر الكمي.افضل قيمة لعامل التقييد البصري (0.308) للتركيب ذو ثلاثة ابار كمية و(W=21.5nm) و(0.0224) للتركيب ذو خمسة ابار كمية و(W=11.3nm). عامل التقيد له تحسن كبير في التركيب المتعدد الابار افضل من التركيب ذو البئر الكمي المفرد . واظهرت النتائج ان عامل التقييد للتركيب المتعدد الابار اكبر منه للبئر الكمي المنفرد بمقدار 18 مرة للتركيب وبمقدار 25 مرة للتركيب . هذا التحقيق لتحسين عمل نبيطة الليزر دايود من خلال تاثير عامل التقييد البصري على الربح وتيار العتبة والقدرة الخارجة والكفاءة تحت الانحياز الامامي في المنطقه الفعالة، كانت كثافة تيار العتبة ووكفاءة (89% ل و97% لـ ) | This work is description of theoretical comparison between two systems and for heterostructure quantum well laser. Where studied the effects of the variation parameters for this structure such as a well width, barrier width for Single and Multi - Quantum Well, on laser parameters such as optical confinement factor, threshold current, threshold current density, optical gain, output power and efficiency. In addition we studied the density of states for quantum well.The optical confinement factor has the best value (0.308) for 3QWs at (W=21.5nm) and (0.0224) for 5QWs at (W=11.3nm). It introduced a significant improvement in MQW is much higher than SQW for two systems. The results showed that optical confinement factor of 3QW are much higher (by a factor 18) for and (by a factor 25) for 5QW, from optical confinement factor of SQW. This investigated for improve the work of laser diode device through the effect of optical confinement factor on the gain, threshold current, output power and efficiency under forward bias in active region, where threshold current density , with efficiency (89%for and 97% for )

تحضير ودراسة الخواص الطيفيه الى الوسط الليزري الفعال Er : TiO باستخدام تقانة الصول - جل Preparation and Study of the Spectroscopic Properties of Er : TiO2 Laser Active Medium using Sol - Gel Technique

اسم المؤلف: هناء محمد ياسين
اسم المشرف: صباح نوري مزهر بسام غالب رشيد
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: دكتوراه
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ions Doped nano particular titanium dioxide was prepared via sol - gel method under varying conditions (with doping rates equal to 1.24%wt, 2.65%wt, 3.78%wt, 5.05%wt and 6.31%wt). The structure, morphological and spectroscopic properties of prepared doped samples were investigated by a variety of techniques, including XRD, AFM , UV - Visible spectroscopy and photoluminescence spectroscopy.XRD analysis shows that TiO2 prepared samples have amorphous structure turn to polycrystalline anatase structure after annealing process. The lattice constant parameters 'a' and 'c' of the tetragonal lattice anatase TiO2 powder has been calculated; the results showed that the value of 'a' remains essentially unchanged, while the lattice constant 'c' have slightly increased at lower doping rate then become stable at higher doping rate. This is due to a combination of interstitial and substitutional accommodation of the dopant ions.The FTIR spectra for pure and doped samples after annealing process show a single transition peak at wave number around 1200cm - 1 and 1102 cm - 1 respectively. The wavelength of high transition rate of this peak depends on Er3+ concentrations. By Comparing with wavelength of high transition rate of pure TiO2 sample, slightly peak wavelength increments shift occur with increment of doping concentration rate. FTIR spectra give a good indication in direction of synthesis of optical band - pass filter at a wavelength around 9.07μm (~1102 cm - 1).Judd - Ofelt analysis is performed to calculate the three Judd - ofelt of parameters; Ω2, Ω4 and Ω6. From the absorption spectra, the radiative transition probabilities A(J;J’), radiative lifetime τrad and fluorescence branching ratioare calculated for each excited upper manifolds states of Er3+ .A photoluminescence peaks was recorded at wavelength around to 498nm, 533nm and 1533 nm. The emission cross - section σem for prepared samples are calculated. It was founds that sample with doping rate 5.05%wt have high σem values in compares with other samples, and it’s value is close to those value of Er : Glass.According to the spectroscopic properties of doped samples, it could be concluded that Er : TiO2 has the potential to be a laser mat

تاثير زيادة النسب الحجمية للكادميوم على الخصائص التركيبية والبصرية لاغشية اوكسيد الخارصين The effect of increasing the volumetric ratios of Cadmium on the Structure and optical properties for Zinc Oxide Films

اسم المؤلف: هدى نجم عبد
اسم المشرف: خضير عباس مشجل
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الاغشية الرقيقة
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: حضرت اغشية اوكسيد الخارصين (ZnO) غير المشوبة، والمشوبة بالكادميوم (ZnO : Cd)، وبنسب تشويب مختلفة (2, 4,6, 8) %،حضرت بتقنية التحلل الكيميائي الحراري هذه الاغشية ر’سبت على قواعد ساخنة من الزجاج بدرجة حرارة (673°K)، وبسمك ((400  20 nm. بينت نتائج حيود الاشعة السينية ان كافة الاغشية المحضرة كانت متعددة التبلور، وتمتلك تركيبا من النوع السداسي المحكم، والاتجاه السائد (002) وعندالتشويب بالكادميوم يتغير الاتجاه السائد الى (101), ان معدل حجم البلوريات في حالة التشويب يقل من (22nm) الى (17nm) عند زيادة نسبة التشويب. كذلك بينت صور مجهر القوة الذرية (AFM) ان هنالك اختلافا في طبيعة سطوح الاغشية المحضرة، وان قيم معدل الحجم الحبيبي يقل مع زيادة نسبة التشويب من (99nm) الى (71nm) . ان قيم معدل خشونة السطح وقيم الجذر التربيعي لمربع متوسط الخشونة (RMS) تقل مع زيادة نسبة التشويب للاغشية المحضرة ومن ملاحظة الصورنستنتج ظهور بعض التراكيب النانوية للاغشية المحضرة.وتمت دراسة الخصائص البصرية للاغشية من خلال تسجيل طيفي النفاذية، والامتصاصية، ولمدى الاطوال الموجية (400 - 900nm)، وقد وجد ان اعظم قيمة للنفاذية هي (82%) عند الاغشية غير المشوبة, وكما وجد ان فجوة الطاقة البصرية للانتقال الالكتروني المباشر المسموح للاغشية غير المشوبة (3.20eV)، وتقل قيمتها الى (3.10 eV) عند نسبة التشويب (8%) على العكس من طاقة اورباخ التي تزداد مع زيادة نسبة التشويب فكانت للاغشية غيرالمشوبة (350 meV) وعند نسبة تشويب (8%) وصلت الى (826 meV)،كما تم حساب الثوابت البصرية للاغشية المحضرة التي تتضمن معامل الانكسار, معامل الخمود, ثابت العازل الكهربائي بجزئيه الحقيقي والخيالي بوصفها دالة للطول الموجي، ان جميع هذه الثوابت تزداد مع زيادة نسبة التشويب، اما قيم الانعكاسية كدالة للطول الموجي فقد تم حسابها من طيف النفاذية والامتصاصية فانها تزداد بزيادة التشويب, اما بالنسبة لمعامل الامتصاص كدالة لطاقة الفوتون فانه يزداد بزيادة التشويب ان اضافة الكادميوم ادى الى تغيير في الخصائص التركيبية والبصرية لاغشية اوكسيد الخارصين. | Study undoped zinc oxide films (ZnO) and doped with Cadmium (ZnO : Cd) by different percentage doping (2,4,6,8)% which have been prepared by chemical spray pyrolysis technique, on the glass substrates heated at (673◦K) with thickness was of (400 ± 20)nm. The (XRD) investigation showed that ZnO films were polycrystalline and have a hexangonal wurtzite structure with a preferred orientation along (002) plane, and doping of Cadmium change the orientation along (101). the average crystallite from doping was decreased from (22nm) to (17nm) by increasing percentage doping .also the (AFM) images showed different in topography of the prepared films, and the grain size decreased with increasing percentage doping from (99 to 71 nm) .as the average surface roughness and root mean square values (RMS) decreased with increasing percentage doping prepared films, from these picture the results we conclude that have nanostructure prepared films. And the study optical properties films from The absorbance and transmittance spectra have been recorded in the wavelength rang of (400 - 900)nm,It was found that the maximum transmittance to (82%) for pure films. and the optical energy gap of direct allowed transition was (3.20eV) for pure and decrease the value reach (3.10eV) percentage doping (8%), its on the contrary of Urbach energy their values were increase as the doping percentage increase and equal to (350meV) for pure and percentage doping (8%) reached to (826meV), The calculated optical constants prepared films including refractive index , extinction coefficient, real and imaginary part of dielectric as a function of wavelenght,all these constants are increase with the increase of doping percentage, The reflectance values as a function of wavelength have been recorded from the absorbance and transmittance spectra are increase for increase doping. While the absorption coefficient as afunction of photon energy is increase for all doping percentage, the addition of cadmium changes the structural and optical properties for the film Zinc oxide .

تصنيع ودراسة خصائص كاشف ضوئي وخلية شمسية لاغشية CuO الرقيقة Fabrication and Study Properties Photodetector and solar cell CuO Thin film

اسم المؤلف: هبة ممتاز علي
اسم المشرف: سمير عطا مكي
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الاغشية الرقيقة
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا البحث , تم تصنيع كاشف ضوئي وخلية شمسية من مادة اوكسيد النحاس CuO)) ثم دراسة خصائصه والمحضرة من ترسيب اغشية (CuO) النقية ,وبسمك مختلف 400,350,300,250) nm) بطريقة التبخير الحراري في الفراغ اذ تم تحضير هذه الاغشية بترسيب معدن النحاس النقي (Cu) على قواعد زجاجية وسيليكونية بدرجة حرارة الغرفة (300)K، ومن ثم اكسدة هذه الاغشية المحضرة بدرجة حرارة (300)ºC لمدة ساعة كاملة بوجود تدفق الهواء. اظهرت نتائج فحوصات حيود الاشعة السينية (XRD) ومجهر القوة الذرية (AFM) ان جميع الاغشية المحضرة من النوع متعدد التبلور وذات اتجاهية (111) , (1 ̅11) ان الحجم الحبيبي متجانس ومنتظم ومعدل خشونة السطح RMS)) يزداد بزيادة السمك . عند اجراء قياسات الخواص البصرية تبين ان لاغشية (CuO) امتصاصية عالية في مدى الاطوال الموجية للمنطقة المرئية nm(700 - 400), ان كلتا قيمتي النفاذية وفجوة الطاقة يتناقصان من (1.8 - 1.4 eV) بالاعتماد على زيادة السمك للاغشية المحضرة.اظهرت القياسات الكهربائية للاغشية المحضرة تغير المقاومية الكهربائية كدالة لتغير درجة الحرارة ضمن المدى الحراري (303 - 423)K ، حيث التوصيلية تزداد بزيادة كل من درجة الحرارة والسمك وتبين من خلال قياسات تاثير هول ان نوع التوصيلية لاغشية مادة CuO من النوع الموجب - القابل (p - type), , تزداد تركيز حاملات الشحنة وتقل التحركية بازدياد السمك. اظهرت نتائج قياسات (تيار - جهد) في حالة الظلام للكاشف الضوئي المحضر تم حساب عامل المثالية للكواشف المصنعة اذ وجدنا انها تزداد بزيادة السمك , اذ بلغ اقل قيمة له (3.431) عند سمك nm (300), وجدنا ان الاستجابة الطيفية للكواشف المصنعة تعمل ضمن المنطقة الطيفية (400 - 900)nm مع وجود قمتين للكاشف ( - CuO/n - Sip) ، تظهر القمة الاولى عند الطول الموجي (688)nmاي ضمن منطقة المدى المرئي من الطيف الكهرومغناطيسي , والقمة الثانية عند الطول الموجي (810)nm اي ضمن منطقة مدى الاشعة تحت الحمراء القريبة, وكذلك الحال لبقية الكواشف المصنعة مع حدوث ازاحة طيفية في قمة الاستجابة الاولى ضمن المنطقة المرئية عند زيادة السمك . ولوحظ ان افضل نتائج الكواشف الضوئية المحضرة كانت عند سمك nm(300) حيث بلغت اعلى قيمة للاستجابة الطيفية 0.68)A/W), والكشفية النوعية كانت بحدود 1012 6.808)cm.Hz1/2.W - 1) عند الطول الموجي nm(708)، واعلى زمن فترة حياة الحاملات μ sec (10) , والتي تم الحصول عليها عند درجة حرارة الغرفة .في هذا البحث تم تصنيع خلية شمسية من المفرق الهجين (p - CuO/n - Si) المحضر من ترسيب اغشية ( (CuOالمحضرة بسمك مختلف بطريقة التبخير الحراري في الفراغ على قواعد سيليكونية احادية البلورة باتجاهية (111) من النوع (p - type) كما اظهرت خصائص (تيار الدائرة القصيرة وفولتية الدائرة القصيرة ) في حالة الاضاءة ان الخلية الشمسية ذات سمك nm((300 تمتلك اعلى قيم للكفاءة مقارنة بقية الخلايا الشمسية الاخرى ، اذ بلغت الكفاءة التحويلية (η=5.9%) في حالة الظلام, ان المفرق المصنع هو من النوع الحاد، ولوحظ تناقص السعة بزيادة كل من جهد الانحياز العكسي والسمك في حين يزداد عرض منطقة النضوب وقيمة جهد البناء الداخلي بزيادة السمك | In this research photodetector and solar cell fabrication from copper oxides (CuO) its properties were studied, which prepared by deposition CuO at different thickness (250,300,350 and 400)nm via thermal evaporation under vacuum method These films have been prepared by (Cu) Pure metal was deposited on glass and silicon substrate in room temperature (300K) and then oxidation prepared (Cu) films at temperature (300)ºC for one hour with exist air flow. The XRD investigation showed that all the films and atomic force microscopy properties (AFM), that all prepared films are polycrystalline with preferred orientation along (1 ̅11),(111) plane for all films that grain size all the films were homogeneous and smooth and root mean square )RMS) rise increases thickness.The optical measurements showed that the thin films (CuO) high absorbency over the visible region wavelength of (400 - 900)nm ,transmission and the optical energy band gap decrease from (1.8 - 1.4) eV with the increase thin film thickness.The electrical measurements showed variation of the resistivity as a function of temperature in the range (303 - 503)K ,The results showed that increasing in electrical conductivity with increasing both temperature and thickness , observe the Hall effect were (n - type) semiconductor and , also the value of Hall coefficient increasing thickness with increasing the increasing concentration and decrease mobility increasing thickness.The I - V characteristics measurements showed of prepared detectors under dark calculate the ideality factor detectors fabricated find increasing with increasing thickness then value less (3.431) on thickness (300nm) ,found the detectors fabricated showed a range of spectral responsively between (400 - 900) nm with two peaks (p - CuO/n - Si) one peak at (688)nm wavelength - visible region, while the second peak at (810)nm wavelength - IR region The same response for the detectors fabricated with wavelength shifted in the first peak response within IR region and The response time increase with increase thickness The good result of the spectral responsively found at thickness (300)nm which has a peak response about (0.68) A/W and a specific detectivity of )6.808) cm.Hz1/2.W - 11012at (861) nm wavelength with Maximum carrier life time which thickness (300)nm about (10) µ sec obtained at room temperature In this research was solar cell fabricated from (p - CuO/n - Si) heterojunction which prepared from deposited films by using thermal evaporation technique from (CuO) with different thickness, and different (p - type) single crystal silicon substrate with orientation (111). All illumination and (Short Circuit Current and Open Circuit Voltage) characteristics measurements showed solar cell with (300)nm thickness have higher efficiency among other cells, the efficiency (η) value from (η =5.9%) that the heterojunction is abrupt. The capacitance decreases with increasing reverse bias voltage, also with increasing thickness.The width of depletion layer and the value of built - in potential increases with increasing of thickness

دراسة تاثير استبدال (Y2O3,Sb2O3,SrO) على الخصائص التركيبية والكهربائية للمركب فائق التوصيل HgBa2Ca2Cu3O8 Study the effect of (Y2O3,Sb2O3,SrO) substatution on the structural and electrical properties of the HgBa2Ca2Cu3O8+? superconductor compound

اسم المؤلف: نور قاسم فاضل
اسم المشرف: كريم علي جاسم
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تتضمن الدراسة تاثير الاضافات (SrO or Y2O3 or Sb2O3) على الخواص التركيبية والكهربائيه للمركب الفائق التوصيل . [Hg 1223] تم حضير النماذج الاتيه HgBa2 - xSbxCa2Cu3O8+δ) وHgBa2 - xYxCa2Cu3O8+δو (HgBa2 - xSrxCa2Cu3O8+δ ولقيم x=0, 0.1, 0.2, 0.3 بطريقه تفاعل الحاله الصلبة.وقد درس الخصائص التركب البلوري باستخدام حيود الاشعة السينية ( XRD ) واظهرتحليل حيود الاشعة السينية ان جميع العينات ذات تركيب (tetragonal) تحوي على اطوارتركيبه فائقه التوصيل منخفضة (1212و1201) وعالية (1223) , وان النسب الطوريه ) نسبه الطورالعالي 1223) تزداد عند الاستبدال. كذلك وجد بان قيمة الثابت الشبيكة (c) يقل عند استبدال (SrO or Y2O3 or Sb2O3) في موقع الباريوم.حيث ان قيمه ثابت الشبيكه c للمركب HgBa2 - x(Sr or Sb or Y)x Ca2Cu3O8+δ ل x=0 هي c=15.75 ,في حين عند استبدال Srتنخفض قيمه ثابت الشبيكه cالى c=15.3510 (x=0.1), 15.3811 (x=0.2), 15.4431 (x=0.3),كذلك تنخفض قيمه ثابت c عند استبدال Sbالى 15.3417 (x=0.1), 15.4274 (0.2), 15.4432 (x=0.3).عند استبدال Yتنخفض قيمه ثابت الشبيكه cالى15.353 (x=0.1), 15.397 (0.2), 15.473 (x=0.3). . لحساب درجه الحراره الحرجه تم دراسة المقاوميه الكهربائيه باستخدام تقنيه القطاب الاربعة, حيث وجد ان درجه الحرارة الحرجه تزاد عند استبدال SrO وY2O3 وSb2O في موقع الباريوم وان اعلى درجه حرارة حرجة تم الحصول عليها عند استبدال Srوهي 138 كلفن. في درجة حرارة الغرفة تم قياس ثابت العزل الكهربائي كداله للتردد في المدى (Hz50 - 1MHZ), قد وجد ان ثابت العزل الكهربائي للتردد HZ 50 هو 45.489، بينما عند استبدال (Sr)ينخفض ثابت العزل الكهربائي الى 45.1715 (x=0.1)، 24،2123 (0.2x=) ,16.82781313 (x=0.3)، وانخفض ايضا ثابت العزل الكهربائي عند استبدال (Sb) الى 12،708 (x=0.1)، 10.339 (0.2x=) ,10.816 (x=0.3) لكن عند استبدال (Y) ثابت العزل الكهربائي يزداد الى 63.3682 (x=0.1) الى 26،378 (x=0.3). | The present thesis includes effect of (SrO, Y2O3 and Sb2O3) substatution on the structural and electrical properties of the [ Hg - 1223] compounds. Which have prepared the superconducting compounds HgBa2Ca2Cu3O8+δ ,HgBa2 - xYxCa2Cu3O8+δ, HgBa2 - xSbxCa2Cu3O8+δ and HgBa2 - xSrxCa2Cu3O8+δ (x=0.1,0.2,0.3) by useing Solid state reaction method. The crystal structures for all the specimen have been determined by of X - ray diffraction. Shows the XRD that all specimen have tetragonal structures correspond to the high [ Hg - 1223] and low - phase[ Hg - 1201 and Hg - 1212], and there is a decrease in c - parameter value when substituted of (Sb2O3 or SrO or Y2O3) in Barium site, where that c - parameter value of HgBa2 - x(Sr or Sb)x Ca2Cu3O8+δ for x= 0 is c=15.75, while at substatution (Sr) decreased c - parameter value to c=15.3510 (x=0.1), 15.3811 (x=0.2), 15.4431 (x=0.3), also decreased c - parameter value at substatution (Sb) to 15.3417 (x=0.1) , 15.4274 (0.2) and 15.4432 (x=0.3), at substatution (Y) decreased c - parameter value to 15.353 (x=0.1) , 15.397 (0.2) and 15.473 (x=0.3). while the volume fraction of the high - Tc phase increased with the increase of (Sb2O3 or SrO or Y2O3) content. Electrical resistivity was used to find the critical temperature using the four - probe technique, found that transition temperature which it increased when substituted (Sb2O3 or SrO or Y2O3), and we get a highest critical temperature is 138k. The dielectric constant have been measured and is a function of applied frequencies ( range of 50 Hz to 1MHz) at room temperature HgBa2 - x(Sr or Sb)x Ca2Cu3O8+δ for x= 0. It was found that the dielectric constant of at the frequency 50Hz is 45.489 , while at addition(Sr) decreased dielectric constant are 45.1715 (x=0.1) , 24.2123(0.2) and 16.82781313 (x=0.3),also decreased dielectric constant at addition(Sb) to 12.708 (x=0.1) , 10.339(0.2) and 10.816 (x=0.3).but when addition(Y) dielectric constant increasing are 63.3682 (x=0.1) to 26.378 (x=0.3). It was found that dielectric loss factor (tan) of all specimens decreased with the increase of frequency.

تصميم مرشح الحافة للمنطقة المرئية - تحت الحمراء القريبة والمنطقة تحت الحمراء المتوسطة باستخدام طريقة الابرة DESIGN OF EDGE FILTER IN VIS - NIR AND MIR REGIONS BY USING NEEDLE METHOD

اسم المؤلف: نرمين علي جاسم
اسم المشرف: الاء نزار عبد الغفار
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الدراسة تم تصميم مرشحات الحافة لحالة السقوط العمودي وباعتماد الطريقة التوليفية المثلى (الابرة) في التصميم ضمن المنطقتين المرئية وتحت الحمراء القريبة (0.3 - 0.9 µm) والمنطقة تحت الحمراء المتوسطة (3 - 5 µm) . كما تضم ايضا دراسة وتصميم لمرشحات الحافة بنوعيها باستخدام الطريقة التحليلية) الكلاسيكية (و المقارنة مع تصاميم الطريقة التوليفية المثلى )الابرة( . اوضحت النتائج امكانية الحصول على تصاميم مثلى لمرشحات الحافة بنوعيها وباداء بصري امثل المتمثلة بنفاذية عالية لمدى واسع من الاطوال الموجية والحصول على حافة حادة وذلك باستخدام عدد مناسب من الطبقات وسمك اقل وبهذا وفرت التصاميم الحديثة الكلفة واعطت امكانية تصنيع تصاميم تخصصية معقدة. ابرزت الطريقة الحديثة) الابرة( حل الكثير من مشاكل التصميم والتي من ابرزها التموجات الحادة (ripples) التي تظهر في منطقة النفاذية (passband) حيث تم الحصول على مرشحات حافة ذات نفاذية عالية من دون اي تموجات. واشارت النتائج الى ان الزيادة في عدد الطبقات ساهمت في اعطاء اداء بصري افضل لمرشحات الحافة على عكس ما يحدث في حال استخدام الطريقة التحليلية حيث تؤدي الزيادة في عدد الطبقات الى زيادة التموجات .حيث تم التوصل لتصاميم مثلى من خلال التحكم بالسمك البصري لطبقات الطلاء مع المحافظة على السمك من الزيادة عن الحد المسموح . في هذه الدراسة تم بناء نموذج جديد وشامل من مواد متجانسة مهملة الامتصاص حيث تم استخدام نفس المواد لتصميم نوعي مرشحات الحافة ضمن كل منطقة من الاطوال الموجية المعنية . | In this current study needle technique presented as a powerful synthesis approach to design new construction design stacks for edge filters of long and short - wave pass for visible - near IR region (0.3 - 0.9 µm) and mid infrared region (MWIR) (3 - 5 µm). Also, it includes study and design of edge filters by using analytical method as well as the comparing of results with the new designs that achieved by needle technique.Results achieved optimal optical performance of edge filters which is characterized by the high transmittance, wide passband, and zero transmittance in stopband with managed to keep steepness of edge.We could to overcome many complex spectral problems. successfully we got designs with optimized optical performance in passband where ripples were eliminated over wide range of wavelengths. Also, we achieved a design of edge filter with special style of optical performance which it is impossible to achieve by analytical design method.The effect of needle technique leads to obtain new construction designs of edge filter for (LWP) and (SWP) by using suitable number of coating layers with small overall thickness, and that is important in manufacturing.It has been provided a promising coating materials system for use in design where the same coating materials was used in design of long - wave pass and short - wave pass in the concerned wavelengths regions

تقييم كفاءة خلية شمسية من مادة السيليكون ذات اخاديد مختلفة الشكل باستخدام برنامج زيماكس Efficiency Evaluation of Different Grooves Silicon Solar Cell Using ZEMAX

اسم المؤلف: مريم ازهر علي غالب
اسم المشرف: علاء بدر حسن
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: فيزياء الطاقة الشمسية
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا البحث تصميم خلية شمسية سليكونية ذات اخاديد تلامس سطحها العلوي لزيادة كفاءة الخلية عن طريق تقليل الانعكاسية للاشعة الساقطة، وكذلك زيادة طول المسار البصري للاشعة وتقليل عدد الاشعة الساقطة بزاوية اقل من الزاوية الحرجة، وبالتالي زيادة فرصة امتصاص الفوتونات داخل الخلية. تكون الاخاديد مصنوعة من السليكون وتضاف الى سطح الخلية الشمسية، حيث تلامس سطحها العلوي، وصممت بخمسة اشكال هي : ( الاول : خلية شمسية ذات اخاديد مثلثة الشكل متغيرة عرض القاعدة، والثاني : خلية شمسية ذات اخاديد مثلثة الشكل متغيرة عرض الراس، والثالث : خلية شمسية ذات اخاديد مستطيلة الشكل متغيرة الارتفاع، والرابع : خلية شمسية ذات اخاديد مستطيلة الشكل متغيرة العرض، والخامس : خلية شمسية ذات اخاديد نصف كروية الشكل ). ويوضع اسفل كل خلية كاشف له ابعاد تساوي ابعاد الخلية يكون متحسسا للضوء المرئي والاشعة تحت الحمراء الذي يتوافق مع نفاذية السيليكون حيث كلما ازدادت الانعكاسات الداخلية للخلية ازدادت قراءة الكاشف، وبالنتيجة يمكن معرفة مقدار كسب الاشعة من خلال زيادة طول المسار البصري لها. صممت الاخاديد لقيم مختلفة من نسبة المظهر وهي (0.5 - 0.6 - 0.7 - 0.8 - 0.9 - 1 - 1.2 - 1.4 - 1.6 - 1.8 - 2)، وعند كل نسبة مظهر يتغير طول الاخدود (Z) مرة وعرض الاخدود (W) مرة اخرى، اذ تساعد هذه الاخاديد على تقليل الانعكاسية وزيادة طول المسار البصري، وبالتالي رفع كفاءة الخلية الشمسية. صممت الخلايا الشمسية في هذا البحث باستخدام برنامج (زيماكس) للتصاميم البصرية حيث استخدم نظام تتبع الاشعة غير المتسلسل وكان عدد الاشعة المستخدم في البرنامج نحو (1000) شعاع يسقط بصورة عمودية على الخلية ( ͦ 0 = ϴ)، وتم استخدام زاوية ميلان الاشعة الساقطة بحدود ( ͦ 10 - ͦ 80 ) باتجاهين الاول موازي والاخر مقاطع للاخاديد، وذلك لمعرفة تاثير زاوية السقوط على كفاءة الخلية ومدى تاثير الاخاديد على زاوية السقوط. وبعد هذا العمل والدراسة فيه تم التوصل الى ان افضل نموذج من هذه النماذج الخمسة والاكثر كفاءة هو نموذج خلية شمسية ذو اخاديد نصف كروية الشكل اعطى اعلى قراءة كاشف (3500) شعاع اي ثلاثة اضعاف ونصف العدد الاصلي ، ويليه ثانيا نموذج الخلية الشمسية ذات الاخاديد المثلثة الشكل متغيرة عرض القاعدة حيث اعطى اعلى قراءة كاشف (2500) شعاع اي يعادل مرتين ونصف العدد الاصلي من الاشعة الساقطة، ثم يليه ثالثا نموذج الخلية الشمسية ذو الاخاديد المثلثة الشكل متغيرة عرض الراس وتصل اعلى قراءة كاشف (1400) شعاع، ويليه نموذج الخلية الشمسية ذات الاخاديد المستطيلة الشكل بنوعيها وتصل اعلى قراءة كاشف (1000) شعاع اي العدد الاصلي نفسه من الاشعة الساقطة. ونلاحظ انه عند تغير الزاوية تظهر قراءة الكاشف بهبوط تدريجي. يكون توزيع الاستضاءة للنماذج بوجود تفاوت طفيف في توزيع الاشعة على الخلية، مما يثبت ان توزيع الاستضاءة منتظم لكل ابعاد الخلية. | In this work silicon solar cell has been designed with grooves texture it's upper surface to increase efficiency by reducing reflection of rays and increasing optical path through the cell and subsequently increasing absorption photons into the cell. The grooves is designed from silicon and appended to the upper surface of solar cell. There are five samples have been designed : triangle shape grooves solar cell with variable base, triangle shape grooves solar cell with variable apex, rectangular shape grooves solar cell with variable height, rectangular shape grooves solar cell with variable width, and semicircular shape grooves solar cell. There is detector positioned at the bottom of the cell which has sensitivity for visible light and ir that appropriate with silicon optical transmission and whenever increase internal reflections for cell increase the detector reading then the result it the quantity of ray from increasing optical path. The grooves designed of variable value of aspect ratio (0.5 , 0.6 ,0.7 ,0.8 , 0.9 ,1 , 1.2 ,1.4 , 1.6 , 1.8 and 2) and at any aspect ratio value either grooves length (z) or grooves width (w) variant. The grooves decrease the reflection and increasing optical path through the cell and subsequently increasing solar cell efficiency. In this work, solar cell has been designed by using non - sequential ray tracing mode software program for optical design (zemax). The number of rays used in the program (1000) rays incident vertically on the cell ( ͦ 0 = ϴ) and used incident ray bevel angle( ͦ 10 - ͦ 80 ) in two directions parallel and cross with the grooves to explanation the effect of incident angle on cell efficiency and grooves effect range on incident angle. The best model achieved the five models and (more efficiency) it semicircular shape grooves that gives detector reading (3500) rays equal three times and half of grand number of incident rays, and then triangular shape grooves with variable base that gives detector reading (2500) ray equal twice and half of the grand number of incident rays, and then triangular shape grooves with variable apex that gives detector reading (1400) ray, and then rectangular shape grooves that gives detector reading (1000) ray equal the grand number of incident rays. Obviously increasing angle caused graduated detector reading. The illuminance distribution shows variation of rays distribution on the cell that give uniform illuminance distribution for all cell dimensions.

تحضير التراكيب النانوية المشوية وغير المشوبة لمركب ثنائي اوكسيد التيتانيوم وتطبيقاتها Syntthesis off Doped and Undoped TiO2 Nanosttructtures and ttheiir Applliicattiions.

اسم المؤلف: محسن عطية خضير الطائي
اسم المشرف: رعد سعدون صبري يوسف كاظم عبد الامير
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: TiO2 nanostructures were synthesized by two different techniques : sol - gel and electrospinning methods. Each technique gives us specified nanostructure; nanoparticles can be resulted from the sol - gel method, whereas nanofibers are resulted from electrospinning method.In sol - gel method, the effects of gelatinization time (1, 3, 5) days and calcination temperature (500, 700, 900) oC were studied on TiO2 nanoparticles. The effect of applied voltage (15, 18, 21) kV, flow rate (1, 5, 10) ml/h, and PVP concentration (7, 10, 13) % are studied in the case of TiO2 nanofibers. Also Different ratios of Ag doped TiO2 nanofibers (3, 6, and 9) % were synthesized using electrospinning method. The resulting nanomaterials being characterized using XRD, AFM, FESEM,UV - Vis analysis, and PL measurements. X - ray diffraction measurements show that TiO2 nanoparticles were polycrystalline with anatase phase and transform to rutile phase at 900 oC. TiO2 nanofibers have only anatase phase. The crystallite size and lattice constants (a and c) for both anatase and rutile phases are calculated. No noticeable peaks of silver metal were observed in the XRD when Ag is doped in titania.The roughness average for TiO2 nanoparticles, which is estimated from AFM images increases when the gelatinization time and the calcination temperature increased, but at 900 °C it decreases. This may be attributed to the change from anatase to rutile phase. In the case of TiO2 nanofibers, the roughness average increases with the increases of applied voltage and decreases of the flow rate. While the maximum roughness occurring at 10 % PVP concentration. In general, the roughness average increases with the doping ratio. The diameter size distribution of both TiO2 nanofibers and nanoparticles show the favorite Gaussian distribution.The FESEM images show that the fiber has a uniform distribution and looks like mats. The grain size of TiO2 nanoparticles increase from (58 - 89) nm with the gelatinization time increase from (1 - 5) days respectively, also it increases from (58 - 111) nm with the calcination temperature increase from (500 - 900) °C respectively. In the case of TiO2 nanofibers, the average fiber diameter decreases with increase the applied voltage, and decrease both the flow rate and PVP concentration. Increasing Ag doping ratio will decrease the average fiber diameter, and convert the smooth surface of the nanofibers to granular surface. Silver doped TiO2 nanofibers are very clear in both AFM and FESEM images. The allowed direct band gap of TiO2 nanoparticles slightly decreases from 3.45 to 3.35 eV when the gelatinization time increases from (1 - 5) days respectively. When the calcination temperature increases from (500 - 900) oC, the band gap gradually decreases from(3.45 - 3.30) eV. The band gap of TiO2 nanofibers increase from (3.35 - 3.45) eV due to the increase of the applied voltage from (15 - 21) kV respectively, and decrease from (3.45 - 3.4) eV with increase the flow rate from (1 - 10) ml/h respectively. The decrease of Eg is also observed with the increase of PVP concentration. Finally the band gap decreases from (3.45 - 3.20) eV when the Ag doping ratio increases from undoped to 9 % respectively.PL spectra of TiO2 both nanoparticles and nanofibers are recordedat room temperature and excitation wavelength of 260 nm. Two groupsof peaks were observed, the first peaks lie in the UV region, which can be attributed to the emission of band gap transition related to the anatase structure of TiO2 nanofibers, whereas the second emission band lies in the visible region and originated from the charge recombination at the shallow - trap surface state.Photocatalytic properties in different concentrations (2, 10, and 20) mg/50 ml of both TiO2 nanoparticles and nanofibers were evaluated by photocatalytic degradation of methylene blue (MB) in water under UV light irradiation (λ= 365 nm). The outcomes indicate that Ag doped TiO2 nanofibers exhibited most efficient photocatalytic activity of up to 96 % after 160 min as shown by the degradation of the MB aqueous solution, followed in terms of efficiency the undoped nanofibers, and then nanoparticles respectively. These results make Ag doped TiO2 nanofiberis the most efficient material in water treatment field.

محاكاة الحل التحليلي لقدرة خرج ليزر ليف زجاج السليكا المطعم باليتاربيوم

اسم المؤلف: كنار نبيل جليل
اسم المشرف: مظهر شهاب احمد
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The current study included treating a theory of general derivation equation coefficients output laser's power ( ) by using the analytical solution of the rate equations that included the transition factor ( ), in which the losses scattering be neglected for a laser system when the active material is an optical fiber, its core is silica glass and Yb3+ - doped.While its resonant cavity it resonator Fabry - Perot, and it is pumping through one end of the optical fiber, while the Continuous Wave (CW) laser emission from the other end.In this study, it has been selected pumping wavelength ( 920*10 - 9m) and lasing wavelength ( 1090*10 - 9m) for this middle effective as an example of a typical plan to pump quasi four levels to find a numerical solution of the equation of the output laser which have been derived by programmable coefficients of this equation matlab language (version 8.1) this happened, after the coefficient ( ) has been calculated for all these laser transitions of this middle effective when it has been pumped ( ) as mention above.The simulation results for this laser system have presented that since the optical fiber is Single Clad Fiber (SCF) and a design of (Lycom ) type, it has been found that the concentration of the type (CorActive) is the highest value for obtaining high efficiency.The laser output power ( ) has been drops linearly by the increasing of core optical fiber radius, while it increases linearly with the increasing of the length of optical fiber, the laser output mirror reflectivity, pumping power, it is the highest values when using the optical fiber Single Mode (SM).In case of the optical fiber is Double Clad Fiber (DCF) and the design of type Large Mode Area (LMA), the ( ) decreases with increasing radius of the core of the optical fiber, while increases with each of the length of optical fiber and pumping power.In addition to that it has been found that ( ) increases linearly with the increasing pumping power whether the inner clad fiber shape is a Rectangle or Square or Circular, and that, the value of laser output power and efficiency are higher in the case of a Rectangular shape.
1 ... 63 64 65 66 67 ... 117