عرض: 25 50 75 100 النتائج

نتائج البحث: 25 من أصل 1,641

اعتماد معامل التصادم على فقدان طاقة الايونات العنقوديه السريعه == Impact Parameter Dependence of Energy Loss of Fast Cluster Ions

اسم المؤلف: مثنى محمد محمود
اسم المشرف: خالد عبد الوهاب احمد | رياض خليل احمد
الموضوع العام: علوم الفيزياء
السنة: 2010
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Electronic of molecule and ionic clusters study are useful tools in both fundamental research of both material science and plasma physics. The effect of a cluster shown clearly deviatesin the sum of individual effects of each cluster component. Electronic energy loss and channelling of molecular clusters as a function of impact parameter are not so well understood which is according to the mono - atomic ions phenomena. The cluster stopping power can be theoretically treated by the united - atom model, which describes the cluster as an equivalent single atom, with atomic number and mass being the sum of atomic number and mass of each component. This model is limited to the very beginning of the interaction between cluster and the target.The present work describes the calculation of the impact parameter dependent energy loss for bar ions at high velocities, which reproduces full first order calculations for all impact parameters without large scale calculation. The physical inputs which be used the electronic density and the oscillator strength. Atomic units are used throughoutthe present work.This work describes an extension of the perturbative convolution approximation (PCA) model, based on the impact parameter method, for molecules and clusters namely MPCA (Molecular PerturbativeConvolution Approximation). MPCA gives the energy loss as a function of impact parameter taking in the consideration close and distant collisions.In the present work a simple formula for the electronic energy loss of bare ions, screened projectile and molecular cluster ions as function of impact parameter is described. Starting from first order perturbation theory and proposed three programs written in FORTRAN - 90. Using the physical inputs are the electron density and oscillators strengths of the atom. Good approximation has been done to avoid going in a complex numerical calculations and we obtained good agreement with previous works.An extension to the convolution approximation for the ionization probability, energy loss and energy loss straggling as a function of impact parameter for swift ions leads to write a program for the numerical calculations and then apply it on C - target to study the effects of sub - shell on the variation of impact parameter. , and sub - shells have a different effects on the energy loss and energy loss straggling.

دراسة تاثير التركيزعلى الكفاءة الكمية لصبغة الفثالوسيانين - نحاس CuPc == Study of the effect of concentration on the quantum efficiency of copper - Phthalocyanine dye (CuPc

اسم المؤلف: كاترين كاظم شنشل
اسم المشرف: محمد تقي حسين | صبري جاسم لفتة
الموضوع العام: علوم الفيزياء
السنة: 2010
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: لقد تمت دراسة اطياف الامتصاص والفلورة للصبغة العضوية نوع الفثالوسيانين - نحاس(CuPc) في المذيب الدايوكسان, وتحت ظروف طبيعية عن(درجة حرارة الغرفة) وللتراكيز الثلاثة (5x10 - 5 , 1x10 - 4 , 2x10 - 4) مولاري. ان الشدة النسبية لطيفي الامتصاص والفلورة تزداد مع زيادة التركيز وهذا ينطبق مع قانون بير - لامبرت. ان جزيئة الفثالوسيانين((CuPc تمتلك حزمتي امتصاص في المنطقة المرئية وفوق البنفسجية من الطيف,حزمة الطاقة العالية تقع عند حوالي 350 نانومتر,وتعرف عموما باسم حزمة - B.بينما حزمة الطاقة الواطئة فتقع عند حوالي 650 نانومتر,وتعرف عموما باسم حزمة - Q.وقد بينت النتائج تاثير نقصان التركيز في ازاحة اطياف الامتصاص والفلورة الى الاطوال الموجية القصيرة .(Blue Shift) كانت كفاءة الكمية لـ (CuPc) عند التركيز الاول (2x10 - 4) مولاري في منطقة UV/visible 52%) و59%) على التوالي, وزمن العمر الاشعاعي (2.5071 و3.1802) نانوثانية وزمن عمر الفلورة (1.3036و 8763.1) نانوثانية على التوالي, وكانت كفاءة الكمية عند التركيز الثاني (1x10 - 4) مولاري 73%) و65%) وزمن العمر الاشعاعي (5.1426 و5.9717) نانوثانية وزمن عمر الفلورة (7540. 3 3.8816) نانوثانية وعلى التوالي, وكانت كفاءة الكمية عند التركيز الثالث (5x10 - 5) مولاري 83%) و74%) وزمن العمر الاشعاعي (6.2593 و7.6244) نانوثانية وزمن عمر الفلورة (5.1952 و5.6420) نانوثانية وعلى التوالي. دلت الدراسة لاطياف الامتصاص والفلورة للصبغة العضوية (CuPc) بان علاقة الكفاءة الكمية تتناسب عكسيا مع زيادة التركيز | The Absorption and Fluorescence spectra have been studied for organic dye Copper - phthalocyanine (CuPc) in solvent Dioxane separately under normal circumstances at (room temperature) for three concentration (2x10 - 4, 1x10 - 4, 5x10 - 5) M. The intensities of the absorption and fluorescence spectra are increasing with the increase of the concentration which agrees with Beer - Lambert Law. Phthalocyanine molecules (CuPc) have two absorption bands in the visible and ultraviolet region of the spectrum. The higher energy band, occurring at around 350 nm, is generally known as the B - band. The lower energy band, occurring at around 650nm, is generally known as the Q - band. The measurement shows that the Absorption and Fluorescence spectrum have shifted to short wavelengths (Blue Shift). The quantum efficiency of (CuPc) at (2x10 - 4 M) in UV/visible region is (qFM = 52% & 59%) respectively. While the radiative life time is (tFM = 2.5071 ns & 3.1802 ns) and the fluorescence life time is (tF = 1.3036 ns & 1.8763 ns) respectively. For the second concentration (1x10 - 4 M) is (qFM = 73% & 65%), (tFM = 5.1426 ns & 5.9717 ns) and (tF = 3.7540 ns & 3.8816 ns). For the third concentration (5x10 - 5 M) is (qFM = 83% & 74%) (tFM = 6.2593 ns & 7.6244 ns) and (tF = 5.1952 ns & 5.6420 ns).The quantum efficiency results appear to be increase with decreasing concentration.

تاثير الحجم الجزيئي لاسود الكاربون على الخواص التخميدية لمتراكبات البيوتادين == Effect of carbon black particles size on the damping properties of Butadiene composites

اسم المؤلف: فرزدق كريم عبد معين
اسم المشرف: سمير حسن هادي النصراوي
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: دبلوم عالي
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: تم في هذا البحث دراسة تاثير الحجم الجزيئي لاسود الكاربونN326 ,N375 N660) ) على الخواص التخميدية (Rebound Resilience , damping time) واالخواص الميكانيكية (hardness , Specific Gravity) للمطاط الصناعي BRcis المعروف باسم بونا . حيث تم تحضير وتصنيع عجنات مطاطية تتكون من المطاط الصناعي BRcis كمادة اساس . اما بالنسبة لمواد التقوية او المالئات Fillers فهي اسود الكاربونCarbon black (N326 ,N375 N660) . تضمن البحث تحضير 13 عجنة تكون فيها نسب المطاط الصناعي BRcis في كل عجنة (pphr 100( ونسب اسود الكاربون (N326 ,N375 ,N660) كالاتي PPHR ( 0 ,10 ,20 ,30 ,40 ) لكل نوع من انواع اسود الكاربون .حيث اجريت جميع الفحوصات الميكانيكية والتخميدية كلا حسب ASTM الخاصة بها مثل الصلادة بواسطة(IRHD ) حسب المواصفة ASTM D1415 كذلك الوزن النوعي بواسطة جهاز (Densitron) بالاضافة الى الخواص التخميدية مثل الارتدادية او الرجوعية وكذلك زمن التخميد تم قياسهما بواسطة جهازTripsometer) ) حسب المواصفة ASTM D1054. واجريت الفحوصات بعد فلكنت العجنات . لقد اظهرت اختبارات الصلابة (Hardness) والثقل النوعي(Specific Gravity) ان المطاط المدعم باسود الكاربون (N326) اكثر صلابة وثقل نوعي من النوعين (N375 , N660) . وكذلك اظهرت اختبارات الارتدادية (Rebound Resilience) وزمن التخميد (damping time) ان المطاط المدعم باسود الكاربون (N326) يكون اقل ارتدادية وزمن تخميد من النوعين (N375 ,N660) . | In this study the effect of the molecular size of the Carbon black N326, Carbon black N375,and Carbon black N660 on the damping properties (Rebound Resilience, damping time) and Mechanical properties(hardness , specific gravity) synthetic rubber BRcis known as Bona . especially in the tire making .It was prepared and manufacture integration rubber consisting of synthetic rubber BRcis as a basis. As for the material, Fillers are Carbon black N326 , Carbon black N375 , and Carbon black N660 The research includes the preparation of 13 batch where synthetic rubber ratios be BRcis in each batch 100 Per part hundred Rubber(PPHR) , ratios Carbon black N326, Carbon black N375, and Carbon black N660 follows 0, 10, 20, 30, 40 (Per part hundred Rubber)(PPHR) , for each type of black carbon. Where conducted All mechanical tests and damping both by their own American Society for Testing Material (ASTM) such as hardness by International Rubber Hardness Degree (IRHD) according to standard ASTM D1415 as well as the specific gravity by a device (Densitron) in addition to the properties of damping such regressive or reactionary as well as the damping time was measured by (Tripsometer) device according to standard ASTM D1054. The tests were conducted after Vlkint integration. Hardness tests have shown and specific gravity The subsidized rubber Carbon black N326 more solid and specific gravity of the types N375, and N660. the tests showed Rebound Resilience and damping time that the rubber Compatible Carbon black N326 be less regressive and time damping of types N375, and N660

المقاطع العرضية للانوية المركبة المتكونة من تفاعلات (n,p) و(p,n)

اسم المؤلف: فردوس سامي حسين الياسري
اسم المشرف: ايمان طارق العلوي
الموضوع العام: علوم الفيزياء
السنة: 2010
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The cross sections for (p,n) and (n,p) reactions were calculated according to the available International Atomic Energy Agency (IAEA) libraries and other experimental published data. The well known international libraries like EXFOR, ENDF, JENDL, JEF, JEFF, BROND, CENDL, contain some cross sections measured during the period from the middle of the last century up to several years ago.This study is concerned with the nuclear reactions used in the production of the protons or neutrons, which are important in shielding calculations, accelerators and proton therapy.The analyzing of a complete energy range has been done starting from threshold energy for each reaction. The cross sections are reproduced in fine steps of incident proton or neutron energy in 0.01 MeV intervals with their corresponding errors. The adopted cross sections for all available experimental data have been calculated for all the considered reactions. A mathematical representative equation for all these reactions is formulated. These equations represent the variation of the cross section with energy, which could be used to predict the values of uncalculated cross sections.The cross sections of light elements like Tritium , Helium , Lithium isotopes ,Berlium , Boron isotopes , Carbon , Nitrogen , Oxigen , Alaminum , Silinum isotopes , , , and Phosfor in specific reactions were considered. The calculation of the adopted values for (p,n) and (n,p) reactions have been done and compared with international libraries which give good agreements.The (n,p) reactions cross sections values are derived from the data of (p,n) reactions and visa versa as a function of neutron or proton energy, respectively, by using the reciprocity theory and the principle of reverse reactions for the ground state.The stopping power according to Zeigler formulae was used in order to obtain the neutron yield for each reaction. Q - value, threshold energy, binding energy, compound nucleus cross sections, transmitted wavelength and the probability of occurrence of the reaction have been also calculated.The programmes of adopt.m, reverse.m, stop.m, yield.m, and cnpw.m have been built for the first time in the present work using Matlab 7.0 to calculate the results of the present work, as well as SRIM (2003) program.The evalutated (p,n) and (n,p) cross sections which are used for the first time, in spite of the numerous data available, a limited number of studies concerning the light elements with very small half life are still very important in nuclear technology. They prove that our calculated values are in good agreement with the published data.

الاستقصاءات العملية والمحاكاتية للميزات الترايبولوجية والحرارية للمتراكبات النانوية البوليمرية == Empirical and Simulation Investigations of Tribological andThermal Characteristics of Polymer Nanocomposites

اسم المؤلف: فاضل كريم فرحان
اسم المشرف: زينب عبد السلام الرمضان | بهجت بهلول كاظم
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم دراسة الخصائص الترايبولوجية , الخواص الميكانيكية , محلل التوصيل الحراري, تقنية التحليل الميكانيكي الحراري, تقنية تحليل الوزن الحرارية, معدل التقشر الحراري, معامل العزل الحراري, واختبار المحاكاتي لخلطة (الايبوكسي - البولي استر الغير مشبع) والمدعمة بكاربيد السيلكون النانوي بكسر حجمي (0%, 5%, 10% و15%) مع ثبات الكسر الحجمي للكرافيت الناعم 5% وهذه الدراسة خضعت بتغير في مختلف الكسر الحجمي بدلالة الخصائص الترايبولوجية, الخصائص الحرارية, الخصائص الميكانيكية. تم استخدام تقنية الموجات الفوق الصوتية للتفريق وتقنية الخلط المغناطيسي في تحضيرا لنماذج المتراكبات النانوية ثم تبعها تقنية الصب على البارد باستخدام قالب من التفلون حسب المواصفات القياسية. تم استخدام تقنية المسمار على القرص في قياس الخصائص الترايبولوجية,استخدمت الماكنة القياسية العالمية في قياس الخواص الميكانيكية, وتم استخدام تقنية الصلادة الدقائقية في تحديد قيم الصلادة,استخدمت تقنية المحلل الحراري(Mathis TC i) في قياس الخواص الحرارية, تم استخدام تقنية التحليل الميكانيكي الحراري TMA)) في قياس (معامل التمدد الحراري, الاجهاد الحراري, الانتقال الزجاجي ومعامل المرونة) عند مختلف درجات الحرارة. تم استخدام تقنية تحليل الوزن الحرارية TG)) لقياس تغير الكتلة مع الحرارة بثبوت الزمن. تم استخدام الشعلة الاوكسي استيلينية في تحديد معدل التقشر ومعامل العزل الحراري . تم تنفيذ برامج المحاكاة للانتقال الحراري بثلاث ابعاد باستخدام طريقة الفروقات المحددة لقياس معدل التقشر لنماذج المتراكبات النانوية والخلطة البوليمرية. اظهرت نتائج قيم الميزات الترايبولوجية ( معدل البلى الانزلاقي الجاف) بان معامل الاحتكاك يهبط تدريجيا بتعاقب النسبة المئوية الحجمية للنانوكاربيد السيلكون ويستقر عند قيم ثابتة لزمن الانزلاق العالي , يسلك معامل البلى كذلك نفس السلوك حيث يكون اوطا عند اعلى نسبة مئوية حجميه للنانو كاربيد السيلكون , وتعرض العلاقة بين الاحتكاك - البلى ميكانيكيتين متزاملة, الاولى مع بداية الحركة والمميزة بسطح باهت غير براق التي تدل, على الية التاكل بالحرث , والثانية التي ترافق الاحتكاك المستقر والمميز بالمظهر البراق التي تدل على الية التاكل باللصق. اظهرت نتائج القيم الصلادة زيادة تصاعدية بتعاقب الزيادة في الكسر الحجمي للمالئات. كذلك بينت نتائج قيم متانة الشد, الضغط والانحناء انخفاض تدريجي بتعاقب الزيادة في الكسر الحجمي للمالئات. بينما اظهرت نتائج قيم معامل المرونة زيادة تدريجية بتعاقب الزيادة في الكسر الحجمي للمالئات. كما اظهرت نتائج قيم المحلل التوصيل الحراري (التوصيلية الحرارية, التدفق الحراري, الانتشار الحراري) زيادة تدريجية بتعاقب الزيادة في الكسر الحجمي للمالئات. بينت نتائج السعة الحراري والمقاومة الحراري انخفاض تدريجي بتعاقب الزيادة في الكسر الحجمي للمالئات. اظهرت نتائج قيم التحليل الميكانيكي الحراري تحسن في معامل التمدد الحراري ومعامل المرونة بتعاقب الزيادة في الكسر الحجمي للمالئات. اظهرت نتائج قيم التحليل الوزن الحراري الخسارة العالية بالنسبة المئوية لكتلة خلطة الاساس, بينما اظهرت نتائج قيم الخسارة بالنسبة المئوية في الكتلة للمتراكبات النانوية انخفاض تدريجي بتعاقب الزيادة في الكسر الحجمي للمالئات. تاتي قيم التقشر بواسطة المحاكاة اعلى من قيم العملي هذا يمكن ان يوضح التداخل البيني للمتراكبات النانوية التي تمتلك متانة عالية وقوة ارتباط وان قيم الكثافة خير دليل على ذلك. تم حساب نتائج محاكاة التوصيلية الحرارية ومعامل الاحتكاك بموجب نموذج التركيب الدقائقي ونموذج نيلسون والتي تمت مقارنتها مع نتائج العملي والتي لوحظت انها تقع بين قيم محاكاة الاتجاه الموازي وقيم محاكاة الاتجاه العمودي للمادة المالئة والتي اثبتت ان المالئات تصطف قريبة من الاتجاه العمودي اكثر مما هو عليه من الاتجاه الافقي او العشوائي بالنسبة لاتجاه حركة الانزلاق او اتجاه التدفق الحراري. تم توظيف اقتران استخدام المجهر الالكتروني الماسح ((SEM وقيم الكثافات للمساعدة في تفسير النتائج. المتراكبات النانوية المستخدمة في هذا العمل تمتلك حشوات عالية يمكن استخدامها في التطبيقات عالية الترايبولجي , عالية التشتت الحراري ولمقاومة التقشر. | In this thesis, tribological characteristics, mechanical properties, thermal conductivity analyzer, thermal mechanical analysis technique, thermogravimetry technique, thermal ablation rate, thermal insulation indexed, and simulation test, have been studied for (epoxy - unsaturated polyester blend) reinforced with nano silicon carbide( 0vol %, 5vol%, 10vol%, 15vol%) with constant volume fraction of ultra fine graphite 5%, which are subject to change in different volume fraction in terms of tribological characteristics, thermal and mechanical properties. Ultrasonic dispersion and magnetic stirring techniques are used to prepare the nanocomposites specimens follow with cold - casting technique using flash Teflon molds standard conditions. [Pin - on - disc] technique is used to measure tribological characteristics, Universal testing machine technique is used to measure mechanical properties. Micro hardness Vickers technique is used to determine the hardness. Mathis TC i technique is used to measure thermal conductivity analyze, thermal mechanical analysis (TMA) technique is used to measure coefficient thermal expansion, thermal stress, glass translation and elastic modulus at different temperature. Thermogravimetry (TG) technique is used to measure mass change with time or temperature. Oxy - acetylene flame technique is used to determine ablation rate and insulation indexed. Simulation programs of heat transfer in three dimensions for ablation test for blend polymer and nanocomposites specimens are carried out using finite difference method. Tribological characteristics (dry sliding wear rate) results show that the coefficient of friction drops progressively and settles constant values by succession of Vol% Nano - SiC for high sliding time. Wear coefficient also behaves similarly as being lowest for high Vol% Nano - SiC . The wear - friction relationship displays two mechanisms, the first, associated with the run - in period recognized by dull matte finish which deal to abrasive wear mechanism, and the second mechanism is associated with steady friction recognized by high gloss appearance which is deal to adhesive wear mechanism. Hardness Vickers results show that values increase progressively by succession of volume fraction of fillers. Tensile strength, compression strength, bending strength results show that the values decreases with the increasing volume fraction of additives. while elastic modulus values increase progressively by succession of volume fraction of fillers. Thermal conductivity analyzer (thermal conductivity, thermal effusively, thermal diffusion) results show that values increase by succession of volume fraction of fillers . Heat capacity and thermal resistance results show that values decreases progressively by succession of volume fraction of fillers. Thermal mechanical analysis results show that values coefficient thermal expansion and elastic modulus improvement progressively by succession of volume fraction of fillers. Thermogravimetry results show that values change percentage of mass loss for blend resin matrix very high, while values change percentage of mass loss for nanocomposites decreases progressively by succession of increase volume fraction of fillers. Ablation simulation values come higher than experimental values, this could be explained, by the interface effect of nanocomposites, which have high strength, strong bond force, and density values are evidence to that. Simulation of coefficient of friction and thermal conductivity results, which are calculated according to micro structures model and Nielsen model, and when it was compared with the experimental results, it has been observed, that the experimental results, were localized between the parallel direction simulation values. and perpendicular direction values for additives, which is evidenced that the additives arrangement closed to perpendicular direction more than random or parallel direction with respect to dry sliding and heat flux direction. Scanning electron microscopy SEM, coupled with auxiliary microscopy, and densities were employed to aid interpretation of results. Nanocomposites used in this work, have high volume fraction of additives can be used in applications, which need high tribological, high thermal dispersion, and ablation resistance.

محاكاة لخصائص الهوائيات الكسورية المكونة من الميتاماتيريل == Simulation of Fractal Antenna Properties Composed of Metamaterials

اسم المؤلف: عمار نضال شريف
اسم المشرف: عامر باسم شعلان
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: الميتامتيريال او المواد ذات معامل الانكسار السالب هي مواد صناعية . تمتلك هذه المواد خصائص مثل معامل الانكسار السالب وهي خصائص غير موجودة في المواد الطبيعية. الميتامتيريال التي تم تصميمها من خلال وضع المرنانات الكهرومغناطيسية مثل المرنانات الحلقية المنفصلة (SSR) في مجموعة دورية من بين التصاميم الاكثر انتشارا. المرنانات الحلقية عند وضعها بالقرب من الهوائيات كغطاء فانها سوف تحسن معامل الكسب للهوائي. وعند حفر هذه المرنانات على سطح الهوائي فانها تؤدي الى تقليل حجم الهوائي. اصبحت الهوائيات المطبوعة من اكثر الهوائيات شيوعا وذلك لامتلاكها العديد من الخصائص مثل صغر حجمها وقلة وزنها وسهولة تصنيعها بكلفة قليلة. ان تصميم الهوائيات المطبوعة باستخدام اشكال الهندسة الكسورية اكسبها تحسين في خصائص الهوائي. في هذه الاطروحة تم تصميم ستة اشكال كلاسيكية واربعة اشكال كسورية لخلايا الميتامتيريال وتم حساب المعاملات الخاصة بها باستخدام طريقة الاسترجاع بواسطة برنامج (HFSS) المخصص لمحاكاة النماذج الكهرومغناطيسية. السماحية والنفاذية ومعامل الانكسار السالب تم حسابها وقد اظهرت هذه الخلايا تصرفا مشابها لتصرف المواد اليسارية عند ترددات الرنين العائدة لها. دراسة تاثير خلايا الميتامتيريال على خصائص الهوائيات يقع على شقين ، تحسين معامل الكسب وتقليل حجم الهوائي. غطاء الميتامتيريال الذي يتكون من خلايا كلاسيكية الشكل او خلايا كسورية الشكل تم وضعه فوق نماذج الهوائيات، كوخ الرباعي وبيانو ونتفة الثلج. تم الحصول على نتائج جيدة من تحسين معامل الكسب وتقليل الفصوص الجانبية في شكل المجال للهوائي. ان مقدار التحسين في بعض النماذج والتي تمتلك غطاء مكون من خلايا كسورية الشكل يصل الى 5 ديسيبل. ان المرنان الحلقي تم حفره على سطح الهوائي بيانو اما المرنان الحلقي على شكل هلبرت الكسوري فقد تم حفره على المستوي الارضي لهوائي نتفة الثلج. نتائج جيدة من تقليل الحجم تم الحصول عليها حيث ان مقدار التقليل بالحجم لهوائي بيانو وصل الى 41%. ان الهوائي كوخ الرباعي وهوائي بيانو تم دراستهم عمليا حيث تم تصنيعهم واجراء القياسات لهم باستخدام جهاز محلل شبكة النواقل. وتم الحصول على نتائج عملية متوافقة مع النتائج النظرية. في الدراسات المستقبلية سيتم دراسة اغطية الميتامتيريال لاكثر من طبقتين وبزوايا مختلفة نسبة الى مستوي الهوائي | Metamaterials or left - handed materials are man - made structures. They have properties like negative refractive index that is not found in natural materials. Metamaterials that is designed by placing electromagnetic resonators like split ring resonators (SRRs) in a periodic array is among the most popular designs. Split ring resonators when placed next to antennas as a cover, it will improve the gain of the antenna. Split ring resonator when slotted on patches, it causes a size reduction. Microstrip patch antennas have become one of the most popular antennas because they have many advantages such as low - profile, light weight, and low cost of fabrication. Designing of microstrip patches are utilized from fractal geometry. Fractal shapes exhibit antennas more improved in its parameters.In this thesis, six classical and four fractal unit cell metamaterials are designed and their parameters are calculated using retrieval method by HFSSV13 code for electromagnetic structure simulation. Permittivity, permeability, and negative refractive index are calculated. These shapes show left - handed behavior in their resonance frequencies.The study of effect of metamaterial unit cells on antenna parameters lies in two categories, gain enhancement and size reduction. Meta - cover of classical and fractal unit cells is placed above Quadruple Koch, Peano, and Snowflake antennas. Good results of gain enhancement and side lobe reduction are obtained. Enhancement of some models of fractal meta - cover equals 5 dB. Split ring resonator and Hilbert ring are slotted on antenna patch and ground plane of the antenna respectively. Two models are proposed, First iteration of Peano and Snowflake antennas. A good result of size reduction is obtained. The reduction in Peano antenna equals to 41%. Quadruple Koch and Peano antennas are studied experimentally. These models are fabricated and measured using vector network analyzer. Good agreement of measured and calculated results is obtained. In the future work more than two layers will be investigated with different angles relative to the antenna plane

تاثيرات الاشعاع على الخصائص البصرية لاغشية صبغة مثيلين ازرق المطعمة بpva == Radiation Effects on Optical Properties of Methylene Blue Dye Doped PVA Films

اسم المؤلف: عمار نجم عبد
اسم المشرف: محاسن فاضل هادي الكاظمي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: اجري هذا البحث على مرحلتين, الاولى هي دراسة الخصائص البصرية والتركيبية لاغشية صبغة المثلين الازرق(Methylene blue) المطعمة ببوليمر بولي فينيل الكحول(PVA) وبنسب تطعيم مختلفة وهي (10, 15, 20, 30, 40) مل من محلول الصبغة وبتركيز(1*10 - 5) مول/لتر. كل النماذج حضرت بطريقة الصب والمرحلة الثانية هي تشعيع هذه الاغشية باشعة كاما وبيتا وبجرع مختلفة ودراسة تاثير انواع التشعيع على الخصائص البصرية والتركيبية لها.حيث وجد ان طيف الامتصاص يزداد بزيادة نسب التطعيم لكل من قمتي الصبغة والبوليمر مع وجود ازاحة باتجاه الاطوال الموجية الاطول (ازاحة حمراء), وتم دراسة فجوة الطاقة البصرية ووجد ان فجوة الطاقة الطاقة للبوليمر تتناقص مع زيادة نسب التطعيم مع ثبات فجوة الطاقة للصبغة وقد تم دراسة الثوابت البصرية الاخرى والتي تشمل (معامل الامتصاص, معامل الخمود, معامل الانكسار, وثابت العزل الكهربائي الحقيقي والخيالي).بعد تشعيع غشاء البوليمر النقي واغشية الصبغة المطعمة بالبوليمر ولمختلف نسب التطعيم باشعة كاما وجسيمات بيتا وجد ان هناك زيادة ملحوضة لطيف امتصاص البوليمر النقي بينما طيف الامتصاص هذا يتناقص لاغشية الصبغة المطعمة بالبوليمر وتعاني ازاحة باتجاه الاطوال الموجية الاصغر (ازاحة زرقاء) مع بقاء قمة امتصاص البوليمر على حالها, اما فجوة الطاقة فقد تناقصت بعد التشعيع للبوليمر وازدادت للصبغة لمختلف الاغشية وقد تم دراسة الثوابت البصرية الاخرى والتي تشمل (معامل الامتصاص, معامل الخمود, معامل الانكسار, وثابت العزل الكهربائي الحقيقي والخيالي).اما الفحوصات التركيبية فقد بين كل من حيود الاشعة السينية (XRD) وطيف (FTIR) عدم وجود تفاعل كيميائي بين الصبغة والبوليمر بعد الخلط وعدم تكسر الاواصر الاساسية لهما بعد التشعيع, واظهرت صور (FESEM) تعرض سطح البوليمر للتكسر وازدادت خشونتة بعد التشعيع بينما لم تتاثر كثيرا سطوح الاغشيه المطعمة من الصبغة والبوليمر بالتشعيع | The present work was carried out in two stages .The first stage was studying the optical and structural properties for methylene blue dye doped poly vinyl alcohol as a host polymer in different doping ratio of dye solution (10, 15, 20, 30, 50) ml with concentration of dye (1×10 - 5) mol/liter. All samples prepared by casting method. The second stage was irradiated all samples by Gamma ray and Beta particles in different doses and studying the optical and structural properties for them. The intensity of absorption spectrum increased with increasing doping ratio of dye solution for peaks of dye and polymer and gave red shift. The optical energy gap for PVA increased with increasing doping ratio of dye solution with remaind the energy gap for dye constant. The optical constants (Absorption coefficient, Extinction coefficient, Refractive index, Real and imaginary dielectric constants) was studied. After Gamma and Beta irradiation pure PVA film and MB/PVA films with different doping ratio of dye solution and found that the absorption spectrum increased for pure polymer, while the absorption spectrum for dye is decreased for MB/PVA films and gave blue shift with remained the absorption peak of polymer constant. The optical energy gap for PVA decreased whereas the energy gap for dye increased after irradiation. The optical constants (Absorption coefficient, Extinction coefficient, Refractive index, Real and imaginary dielectric constants) was studied. The XRD and FTIR showed no interaction between dye and polymer after doping and there are no broken fundamental bands after irradiation. FESEM photographs illustrated that the surface of all films became more roughness after irradiation.

دراسة تاثير التشعيع ل PMMA المشععة الكترونيا بواسطة SEM == Investigation of Charging Effect in Electron Irradiated PMMA by SEM

اسم المؤلف: علي سعد مهدي
اسم المشرف: حسن نوري عبد الوهاب العبيدي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم انجاز اجراء تحليلي لقياس الشحنة التي يمكن ان تحقن في نموذج لمادة عازلة في المجهر الالكتروني الماسح. يعتمد هذا الاجراء بالاساس على تحديد شحنة الاستقطاب بواسطة ظاهرة المراة الالكترونية. من خلال ذلك تم تطوير عدة علاقات مرتبطة بهذا الموضوع لتكون قابلة للتطبيق فيما يخص بالطبع شحنات الاستقطاب للمواد الخطية والموحدة الخواص . استنادا الى ذلك تم تحديد الجهد الذي ينشا كنتيجة لتاثير كلا من الشحنات المحقونة الحرة والشحنات المستقطبة. ومع ذلك فهذا العمل تم انجازه وفقا لمنطلق من الناحية النظرية وقد تم اعتماد منحنى التاثير المراتي بمثابة مقياس تقييم لجودة الصورة المراتية. لذلك فان هذا الاجراء قد تم استخدامه لدراسة منحنيات التاثير المراتي التجريبية لمادة PMMA ولجهود تشعيع مختلفة ومن ثم معرفة اهم المعلمات التي تؤثر على هذه المنحنيات. من ناحية اخرى تم دراسة محاكاة مسار الحزمة الالكترونية في داخل غرفة المجهر الالكتروني الماسح فيما يتعلق بتفاعل هذه الحزمة مع المادة ضمن الغرفة. في الواقع وقد استند التعامل الرياضي على الميكانيك الكلاسيكي باستخدام مفاهيم استطارة روذرفورد. في الواقع فان هذه الدراسة قد تم انجازها اولا باستخدام مجال التربيع العكسي اما المرحلة الثانية فهي تتعلق بمجال التربيع والتكعيب العكسي. اهمية الصيغ التي تم الحصول عليها لهذه المسارات تاتي من ارتباطها بين بعض من اهم المعلمات التي تتحكم في ظاهرة التاثير المراتي. هذه المعلمات في الواقع هي الشحنات المحقونة، زاوية السقوط، جهد المسح، ومسافة التشغيل، وثابت العزل الكهربائي لمادة العينة. اوضحت النتائج بشكل جلي ان شحنة الاستقطاب تؤثر على قوة كولوم التي تعاني منها الكترونات المسح. علاوة على ذلك فان التغير في جهد العينة يعتمد بصورة رئيسية على ثابت العزل لمادة العينة. | An analytical procedure has been carried out to measure the charge that may trapped in an insulator sample of scanning electron microscope. It is mainly concerning with the determination of the deduced polarization charges by means of mirror effect phenomenon. Several relations related to such issue have been modified so as to be applicable for regarding charges due to polarization in linear and isotropic material. Consequently, the potential arises as a result for both trapped free and polarization charges is set up. However, this work has been carried out concerning the theoretical point of view, the mirror plot curve has been adopted as an evaluation scale for the quality of the mirror image. Therefore, this procedure had been used to investigate the experimental mirror plot curves for PMMA material with different accelerating potential and then study the most important parameters that affects in these curves. From other hand, a simulation for the electron beam trajectory inside SEM chamber have been investigated regarding the interaction of this beam with material that chamber involves. Actually, the mathematical manipulation has been based on classical mechanics using Rutherford’ scattering aspects. This investigation, in fact, have been accomplished by using an inverse - square field in the first step while the second step has been concerned with an inverse - square and cubic field. The importance of the obtained formulas for these paths comes from its correlation among some of the most important parameters that control the mirror effect phenomenon. These parameters, in fact, are the trapped charges, incident angle, scanning potential, working distance, and dielectric constant of sample material. Results have clearly shows that the polarization charge significantly influences the Coulomb’s force that incoming electrons suffer from. Furthermore, the variation in the sample potential is mainly depend on the dielectric constant of the specimen material.

معدل التقشر ومتانة الانحناء لمتراكبات ثنائي هيدروكسي بنزين (هيدروكوينون) المدعمة بالالياف == Ablative Rate and Bending Strength of Fibers Reinforced Dihydroxy - Benzene(Hydroquinone) Composites

اسم المؤلف: علي زامل منشد
اسم المشرف: بهجت بهلول كاظم
الموضوع العام: علوم الفيزياء
السنة: 2009
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم دراسة معدل التقشر ، التوصيلية الحرارية، متانة الانحناء،و صلادة فيكرز لمتراكبات الفينول نوع ثنائي هيدروكسي بنزين مدعمة بالياف مختلفة (الياف زجاجية نوع E على شكل حصيرة والياف كاربونية مستمرة)،وبنسب حجمية(0%،20%،40%،60%،70%) بدلالة الخواص الحرارية والميكانيكية لتغيرات الكسر الحجمي للالياف.المتراكبات التي خضعت للاختبار كانت مجموعتين هي EGFC، CFC، بالاضافة لمادة الفينول نوع هيدروكوينون(ثنائي هيدروكسي بنزين)HQR. تم استخدام تقنية الكبس الحار لتحضير المتراكبات باستخدام القوالب المارقة تحت الظروف القياسية.استعملت تقنية قرص لي لقياس التوصيلية الحرارية حسب المواصفة البريطانية القياسية لشركة جورج وكرفيه المحدودة. استخدمت تقنية الشعلة الا وكسي - استيلينية لتحديد معدل التقشر وكذلك معامل العزل الحراري حسب المواصفة القياسية ASTM - E285 - 80. وتم استخدام ماكنة Instron لحساب متانة الانحناء حسب المواصفة القياسية ASTM D - 790.واستعمل جهاز الصلادة المجهرية لفيكرز لحساب الصلادة وحسب المواصف القياسية ASTM E92 - 82 . نفذت المحاكاة لحساب معدل التقشر بثلاث ابعاد باستخدام طريقة الفروقات المحددة. اظهرت النتائج بان التوصيلية الحرارية تزداد تصاعديا بتعاقب النسبة المئوية الحجمية للالياف. من خلال النتائج النظرية لاختبار التوصيلية الحرارية التي حسبت من خلال مود يل micro structures وعند مقارنتها مع النتائج العملية تبين القيم النظرية ان هناك تقارب مع النتائج العملية. يسلك معدل التقشر سلوك معاكس حيث يكون اوطا قيمة عند اعلى نسبة مئوية حجمية للالياف ، وتبين العلاقة بين التوصيلية الحرارية ومعدل التقشر اليتين متزاملتين، الاولى مع بداية الاختبار والمميزة بتوزيع مثالي للالياف الذي يدل على الية التشتيت الحراري بالالياف بسبب تكون شبكة من مسارات التوصيلية الحرارية، والثانية التي ترافق اختبار التقشر والمميزة بمظهر تكون الشروخ القصية التي تدل على الية تكون الفحم المبكرة.كما تبين بان متانةالانحناء تزداد تزايديا خطيا بتعاقب النسبة المئوية الحجمية للالياف ، وتعرض العلاقة بين الكسر الحجمي ومتانة الانحناء بروز الية pull - out ، وقد تبين وجود نوعين من الربط بين المادة الاساس والمضافات هما : الربط الضعيف والربط القوي، كما تبين بان الصلادة تزداد تزايديا خطيا بتعاقب النسبة المئوية الحجمية للالياف.جاءت قيم النتائج للمحاكاة لمعدل التقشر اعلى من قيم النتائج العملية، وقد فسر ذلك على ان درجة حرارة لهب شعلة الاختبار (الاوكسي _ استيلينية) العملية لم تصل الى درجة الحرارة الشعلة المستخدمة نظريا، بالاضافة الى تاثير السطح البيني للمتراكبات الذي كان ذو متانة وقوة ارتباط عالية، وقيم الكثافة للمتراكبات تدل على ذلك. وظفت الصور الفوتوغرافية بالاقتران مع الصور المجهرية والكثافة للمساعدة في تفسير النتائج.يتضح من النتائج العملية بان المتراكبات المستخدمة في هذا البحث ذات الكسور الحجمية العالية يمكن استخدامها في التطبيقات التي تحتاج الى تشتت حراري كبير، مقاومة عالية للتهرئة، متانةانحناء وصلادة عالية. | In this work, thermal conductivity, K, ablation rate, Ar, bending strength, σf, and Vickers hardness VHs for phenolic (phenol - formaldehyde) resin, PFR type hydroquinone HQR reinforced with different fibers (,E - glass, as mat , and carbon fibers, as continuous) have been studied, in terms of thermal and mechanical properties, which are subject to change in different fibers volume fraction.The composites candidates for this work were two groups; E - glass fibers composites (EGFC), carbon fibers composites (CFC), besides, pure matrix phenolic resin PFR type HQR. Hot - press technique was used to prepare the composites as well as hydroquinone specimens using flash molds at standard conditions.Lee’s disk technique was used to measure thermal conductivity. Oxy - acetylene flame technique was used to determine ablation rate as well as thermal insulator index according to ASTM - E285 - 80. Instron machine was used to measure bending strength according to ASTM - D790.Microhardness Vickers machine was used to determine the hardness according to ASTM - E92 - 82. Simulation programs of heat transfer in three dimensions of ablative test for hydroquinone and hydroquinone composites specimens were carried out using finite difference method.Thermal conductivity results show that K values increase progressively by succession of volume fraction of fibers. Ablation rate behaves inversely, where it drops at high volume fraction of fibers. The thermal conductivity - ablation rate relationship displays two mechanisms. First, associated with the starting of test is recognized by ideal distribution of additives, which leads to thermal dispersion due to the formation of segregated network of thermal conducting paths. Second mechanism is associated with ablation test recognized by shearing cracks appearance, which leads to earlier char production mechanism.Bending strength results show, that σf increases progressively by succession of volume fraction of fibers. The bending strength - volume fraction relationship displays two mechanisms according to the kind of fibers. Where, it can be observed, pullout mechanism with respect to fibers composites. It is shown that there are two kinds of bonding between the matrix and the fibers; weak - bond and strong - bond. The composites were broken through tension down the specimen and compression upper the specimen and shearing fracture mechanism. Hardness Vickers results show that HVs increases progressively by succession of volume fraction of fibers.Ablation simulation results values coming higher than experimental results value. This could be explained as the interface affect of composites, which had high strength and strong bond force, and density values evidence to that.Optical micrographs, coupled with auxiliary microscopy, and densities were employed to aid interpretation of results. The composites under the study can be used in applications, which need high thermal dispersion, high ablation resistance, and high bending strength

تمييز الاهداف عن الخلفية الارضية ذات التماثل الحراري في الحزمتين من الاطوال الموجية [3.5 - 4.1 - µm and 11 - 12 - µm ] == Discrimination of targets from background of similar temperature, using two - channel data in the 3.5 - 4.1 - µm and 11 - 12 - µm regions

اسم المؤلف: عدي جواد كاظم
اسم المشرف: بسعاد هادي حمزة
الموضوع العام: علوم الفيزياء
السنة: 2011
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: للتمييز بين هدفين او هدف عن الخلفية الارضية استخدمت طريقتان,طريقة حد العتبة وطريقة التصنيف طريقة الحد الاقصى (MLH). تم حساب ( Wλ ) الانبعاثية الطيفية للهدف والخلفية في درجات حرارة مختلفة(T) في اثنين من الحزم الطيفية وبطول موجي μm (3.5 - 4.1) μm(11.0 - 12.0) . وبرسم العلاقة بين دالة التمييز (DF)كدالة لانبعاثية الهدف (target emissivity (εA)) للحزمة وكدالة لدرجات حرارة الهدف. من هذا العمل, التمييز بين الهدف والخلفية الارضية تحت الظروف الجوية المحددة المستخدمة في الموديل الرياضي للحسابات يبين جدوى امكانية كشف الاهداف المختلفة عن الخلفية الارضية بفارق حراري صغير نسبيا.ان تمييز الاهداف بطريقة الكشف الحراري باللاشعة تحت الحمراء يتم من خلال استخدام طريقة حد العتبة والتي تعالج مشكلة الكشف عن الاهداف التي تكون قريبة لدرجة حرارة المحيط ,وذلك بنمذجة الخلفية وباستخدام الموديل الرياضي كقاعدة لتطوير وفهم العمليات الفيزيائية واختلافاتها الامر الذي سيؤدي الى بناء خوارزمية لتعزيز الفرق بين الهدف والخلفية.وبحساب النسبة بين الاشعاع المستلم من الهدف ومن الخلفية، فان افضل تمييز للهدف يكون في حزمتين من الطول الموجي مما هو عليه الحال في حالة استخدام الحزمة الواحدة وخاصة عندما تكون درجة الحرارة للخلفية الارضية والهدف متماثلة..باستخدام احدى طرق التصنيف وهي طريقة الحد الاقصى لتميــــيز الهدف عن الخلفية الارضية في درجات حرارة مختلفة وحزم اطوال موجية مختلفة ومن خلال ملاحظة اقصى كثافة احتمالية . نستنتج ان طريقة الحد الاقصى هي افضل طريقة لتحسين التمييز في نطاق واسع من حزم الطول الموجي في درجات حرارة مختلفة بينما تكون طريقة حد العتبة اسلوب افضل في تحسين التمييز في درجات حرارة مختلفة ولكن في نطاق ضيق من حزم الطول الموجي | To discriminate between two IR targets or target from background two methods are used, the threshold method and the classification method Maximum likelihood Method. we calculate the spectral radiant emittance Wλ for target and background at different temperature (T) in two bands (3.5 - 4.1) μm (11.0 - 12.0) μm. The discrimination function (DF) is plotted as a function of the target emissivity (εA) for bandpass and as a function to target temperature TA in two bandpasses. From this work the discrimination of target from background under selected atmospheric conditions used in the modeling calculation demonstrates the feasibility of detection for target to background in minor temperature differences. Targets discrimination for thermal IR detection is accomplished by using threshold method, which has addressed the problem of detecting targets which are close to ambient temperature. This was done by modeling the background and by using the model as a base for developing an understanding of physical processes and their variations which will lead to the construction of an algorithm to enhance target to background contrast. The present study showed that by ratioing radiance received from target and background better target discrimination is possible using two bands than case from using one bandpass especially when target and background are of similar temperature. Using the Maximum Likelihood Method (MLH) to discriminate target from background in different temperature and different bands will demonstrate the maximum probability density function. Concluding that the Maximum Likelihood Method is to be the best method for discrimination in wide range of wavelength at different temperatures while the threshold method is to be the best method for discrimination at different temperatures but in range of narrow wavelength of bandpasses.

دراسة نظرية لتاثير الانكسار المزدوج في المضخم شبه الموصل البصري == Theoretical Study of the Birefringence Effect in Semiconductor Optical Amplifier

اسم المؤلف: عدنان هاشم محمـد
اسم المشرف: حسن عبد ياسر | علي هادي حسن
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ان هدف كثير من البحوث في مجال الاتصالات الحديثة هو زيادة سعة النقل في الانظمة التي تسخدم مزج - تقسيم الطول الموجي ( WDM) الشائعة الاستخدام في الشبكات البصرية الحالية. تستخدم المضخمات البصرية التي تتنوع حسب اسباب الاستخدام لضمان الحفاظ على قدرة النبضة ضمن مستوى مسموح لذا يستخدم في الكثير من الحالات كمضخم ضمن الخط الناقل اضاقة الى اسخدامه في تطبيقات مختلفة. يظهر مضخم اشباه الموصلات البصري ظاهرة ثنائي الانكسار التي تجعله يتاثر بحالة الاستقطاب للنبضة الداخلة. ان من المتوقع ان يكون لحالة التزامن بين ظاهرة ثنائي الانكسار والتاثر بحالة الاستقطاب الداخلة دور كبير في سلوك المعاملات المختلفة للمضخم. من جهة اخرى فان ظاهرة اقتران النمط والتي تتمثل بتبادل القدرة بين الانماط المتعامدة لايمكن اهمالها لدورها الكبير في تشكيل خواص المضخم. تم اقتراح طريقة رياضية جديدة لحل معادلة الانتشار في مضخم اشباه الموصلات البصري والتي تاخذ بنظر الاعتبار التاثيرات الحركية البطيئة وظاهرة اقتران النمط. ان هذه الطريقة مبنية على اساس تقسيم المضخم الى مقاطع صغيرة بالاتجاه الطولي لضمان اعتبار كسب المادة ذات تغيير صغير ضمن كل مقطع ويمكن اعتبارها ثابتة وهذا بالنتيجة يؤدي الى اعتبارقدرة النبضة ثابتة ايضا ضمن كل مقطع. تم اشتقاق صيغة تكرارية لحساب التاثيرات على طول المضخم وحلت هذه الصيغ التكرارية بالاعتماد على معادلات الربح. بينت النتائج ان الاعتماد على معادلات اقتران النمط تكون اداة مناسبة لدراسة انتشار الانماط داخل المضخم. عند غياب حالة اقتران النمط فان الحافة المتقدمة تختزل الكسب المنجزعلى الحافة المتاخرة وان زمن استرداد الطوريكون طويلا. عند الاخذ بنظر الاعتبار حالة اقتران النمط فقد حدث انحراف في قمة النبضةsuper Gaussian امزامن استرداد الطور فقد قل بوجود حالة اقتران النمط. يعرض الطيف للنمط المستعرض الكهربائي (TE) والمغناطيسي (TM) انخفاضات وارتفاعات بسبب تضمين الطور الذاتي(SPM) غير ان الطيف الكلي يعرض انخفاضات وارتفاعات اقل ويعتمد على معامل الشكل للنبضة. من اجل تحليل تدوير الاستقطاب خلال المضخم فقد تم دمج تاثير حالة الاستقطاب الداخل وخواص مصفوفة الانتقال لكل مقطع من مقاطع المضخم وبوجود اقتران النمط ايضا حيث تم الحصول على معادلات جديدة تصف تطور حالة الاستقطاب داخل المضخم. تم حل هذه المعادلات تحليليا ليتم الحصول على صيغ جديدة لتحديد خواص استقطاب الضوء بدون حالة ترابط الانماط وبوجودها. بينت النتائج ان درجة الاستقطاب عند اهمال اقتران النمط تظهر عند السطح الذي يعني ان الضوء مستقطب كليا. تقل درجة الناقصية كدالة لطول المضخم وتتناسب عكسيا مع القدرات الداخلة امزااوية الاستقطاب كدالة لطول المضخم فتقل عند مواقع مختلفة من المضخم ولاتعتمد على القدرة الداخلة. تقل درجة الناقصية كدالة للقدرة الداخلة ولاتعتمد على التيارعند جميع الزوايا. ان تغيير التيار يعرض نتائج مهمة فيما يخص زاوية الاستقطاب عند القيمة . ان دوران مستوى الاستقطاب عند هذه الزوايا يكون حساسا جدا لمدى صغير جدا من التيار. بينت النتائج عند الاخذ بنظرالاعتبارظاهرة اقتران النمط ان حالة الاستقطاب تظهر اسفل سطح كرة Poincare الذي يعني ان حالة الاستقطاب تغيرت وكان الضوء اصبح مستقطبا جزئيا. ان وجود ظاهرة اقتران النمط جعل تغيير زوايا الناقصية وزوايا الاستقطاب كدالة لطول المضخم تبدو اقل مقارنة بحالة اهمال تاثير اقتران النمط.

تحسين خصائص كاشف ضوئي باستخدام تقنية التنميش الثنائي للسليكون == Improve of photodetecter characteristic using both sides porous silicon technique

اسم المؤلف: عباس كسوب جار الله الخزرجي
اسم المشرف: وسام جعفر عزيز الدجيلي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: الخلاصة تم في هذا البحث دراسة الخصائص الكهربائية والبصرية والتركيبية لاغشية اوكسيد الزنك (ZnO) النقية والمشوبة بالانديوم (In) بنسب مختلفة (1%, 3%) المحضرة بطريقة الرش الكيميائي الحراري, والتي رسبت على قواعد زجاجية وسليكون مسامي بدرجة حرارة (400±10 oC) وبسمك (120±10 nm). قواعد السيليكون المسامي (لجانب واحد وللجانبين) تم تحضيرها بواسطة طريقة التنميش الكهروكيميائيه على رقائق من السليكون (100) .P - Type الكاشف الضوئي (سليكون مسامي/سليكون بلوري/سيليكون مسامي) (PS/c - Si/PS) صنع وحسن بترسيب الاكاسيد الموصلة الشفافة (ZnO/PS/c - Si/PS) و(IZO/PS/c - Si/PS). السيليكون المثقب كان بمسامات دقيقة (pore size > 50 nm) وقطر المسام يتراوح (0.5 - 1 μ m) وزعت المسامات بشكل عشوائي على سطح السيليكون المثقب. الكثافة العالية للمسامات يمكن ان تلاحظ والمسامية تقريبا .(67%) معدل السمك للجانب الامامي (المصقول) (6 μm) وللجانب الخلفي (الغير المصقول) (3 μm) تقريبا. طبيعة السطح للاغشية المرسبة على السيليكون المسامي تكون ذات سطوح خشنة مقارنة مع الاغشية المرسبة على قواعد زجاجية. بينت تقنية حيود الاشعة السينية ان كل الاغشية المحضرة على القواعد المختلفة هي ذات تركيب سداسي متعدد التبلور hexagonal wurtzite)) مع اتجاه تفاضلي سائد(002) ويعرض قمم جديدة اعتمادا على نوع القاعدة كذلك من خلال حيود الاشعة السينية نرى ازاحة في زوايا الحيود وتناقص في الحجم البلوري بسبب التشويب للاغشية المحضرة على قواعد زجاجية من (31.18 nm) الى (12.19 nm). اظهرت صور (AFM) مجهر القوة الذرية طبيعة السطح للاغشية المرسبة على قواعد زجاجية بان الاغشية المشوبة بالانديوم ناعمة ومنتظمة. نعومة الاغشية تتناقص مع تركيز (1%) ثم تصبح اكثر نعومة عند تركيز .(3%) النفاذية كانت عالية جدا للاغشية غير المشوبة والمشوبة بالانديوم لمدى من الاطوال الموجية ( (350 - 850 nm. النفاذية تقريبا (79%) قبل تاثير التشويب ثم تصبح (81 %) مع نسبة تشويب (1%) وتتناقص مع تركيز (3%) الى ( (71% .فجوة الطاقة كانت (3.1 eV),(3.22 eV), (3.21eV) للاغشية (pure ZnO) (IZO 1%) و.(IZO 3%) تتناقص المقاومية (ρᴏ) للاغشية المشوبة في درجة حرارة الغرفة مع زيادة تركيز الانديوم من (1%) الى 3%) ) . نلاحظ من خصائص I - V زيادة التيار الضوئي تحت شرط الاضاءة ونتيجة لزيادة تركيز الانديوم يزداد التيار الضوئي لكل الاغشية. كذلك يزداد التيار تحت شرط الظلام مع زيادة تركيز الانديوم ولكن هذه الزيادة اقل من الزيادة تحت شرط الاضاءة. الاستجابة الطيفية تزداد مع زيادة الطول الموجي لكاشف ضوئي PS/c - Si/PS وتصبح تقريبا (0.69 A/W) عند طول موجي (490), كذلك حسنت الاستجابة الطيفية للكاشف الضوئي بترسيب الاكاسيد الموصلة الشفافة على السيليكون المسامي (ZnO and IZO) بتراكيز انديوم مختلفة. الاستجابة الطيفية لكاشف (ZnO/PS/c - Si/PS) تساوي (0.73 A/W) عند الطول الموجي (385 nm) بينما الاستجابه الطيفية لكاشف (IZO/PS/c - Si/PS) كانت (0.84 A/W) عند الطول الموجي (400 nm). كذلك زمن الاستجابة وزمن الرجوع حسن بترسيب (TCO) . يتناقص زمن الاستجابة من (8 second) لكاشف ضوئي PS/c - Si/PS)) الى (4 second) بترسيب اغشية (IZO) بنسبة تشويب (3%) كذلك يتناقص زمن الرجوع من (6 second) لكاشف PS/c - Si/PS)) الى (2 second) لكاشف (IZO/PS/c - Si/PS). | In this work, structural, optical and electrical properties of have been studied for un - doped and In doped zinc oxide (ZnO) thin films with different indium doping concentrations (1% and 3%) prepared by a chemical spray pyrolysis technique, deposited on glass and porous silicon (PS) substrates at temperature (400±10 oC) with (120±10) nm thickness. The porous silicon substrates (one - side and two - sides) were formed by electrochemical etching of P - type (100) silicon wafers. Photodetector of (PS/c - Si/PS) has been fabricated and improved (ZnO/PS/c - Si/PS) and (IZO/PS/c - Si/PS) by deposited the transmittance conducting oxide (TCO). The porous silicon was macro pores (pore size > 50 nm) and the pore diameter ranging from (0.5 - 1 μ m), which formed by electrochemical etching on p - type (100) silicon wafer, the pores evidently randomly distributed on the porous silicon surface, the high density of pores has been observed and porosity is approximately (67%). The average thickness of front side (polish side) PS was approximately (6 μm) and about (3 μm) of back side (un - polish side). The surface morphology of the thin films deposited on porous silicon was high surface roughness compared with thin films deposited on glass substrates. The X - ray diffraction technique has showed that all prepared films on glass and PS substrates are polycrystalline structures of hexagonal wurtzite with preferential orientation of plan (002) direction and showed the new peaks depend on the substrate type, also from XRD see shifted in diffraction angle and decreased in crystal size by doping for films deposited on glass substrate from (31.18 nm) to (12.19 nm). AFM images showed that the surfaces morphology of deposited films on glass substrates that the IZO films seem smooth and uniform. The roughness of the films decreases with indium concentration 1% and then become very smooth with indium concentration 3%. The transmittance was very high for un - doped ZnO and IZO films within wavelength range (350 - 850 nm). The transmittance about (79%) before the doping effect then become (81 %) with doping concentration (1%) and decreased with doping concentration (3%) about (71%). The energy gap were (3.21eV), (3.22 eV) and (3.1 eV) of (pure ZnO), (IZO 1%) and (IZO 3%) respectively. The resistivity (ρᴏ) of IZO films at room temperature decrease with increasing of indium concentration (1% and 3%) concentrations. I - V characteristics observed the photocurrent increase under the illumination condition and increasing in indium concentration that result to increasing in photocurrent for all films. In the dark condition the dark current also increasing with increasing of indium concentration but this increases less than the increased under illumination condition. The spectral responsivity increased with increasing the wavelength for PS/c - Si/PS photodetector and become about (0.69 A/W) at wavelength (490 nm), also improved the spectral responsivity for the photodetector by deposited the transparent conducting oxide (ZnO and IZO) on porous silicon with different concentration of the indium. The spectral responsivity of (ZnO/PS/c - Si/PS) detector was equal (0.73 A/W) at wavelength (385 nm) while, the spectral responsivity of (IZO/PS/c - Si/PS) detector was (0.84 A/W) at wavelength (400 nm). The response time and recovery time also improved by deposited the (TCO). The response time decreased from (8 second) of PS/c - Si/PS photodetector to (4 second) by deposited IZO films with doping concentration (3%) and recovery time also decreased from (6 second) of PS/c - Si/PS to (2 second) of (IZO/PS/c - Si/PS).

الخواص الكهربائية والتركيب الدقيق لمقاوم اوكسيد الخارصين السيراميكي المتغير المطعم بالاتربة النادرة == Electrical Properties & Microstructure Of ZnO - Based Varistor Ceramics Doped With Rare Earth

اسم المؤلف: عادل اسماعيل كاظم
اسم المشرف: ايسر جمعة ابراهيم | عبد الحميد رحيم مهدي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يعد اوكسيد الخارصين (ZnO) السيراميكي مادة شبه موصلة نوع - n، ويلعب دورا هاما في مدى واسع من العمليات الصناعية والمنتجات التجارية.ان من اكثر الاستعمالات اهمية استعماله لحماية الدوائر الكهربائية والمعدات الالكترونية من الجهد الزائد المدمر نتيجة البرق او الناتج من الارتفاع الكبير والمفاجيء في قيم الجهد الكهربائي, وتسمى المقاوم المتغير المعدني (Metal Oxide Varistor MOV) . يعد المقاوم المتغير نبيطة ذات سلوك غير اومي وخواصه الكهربائية تشبه تقريبا في عملها ثنائي زينر. لغرض دراسة وتوصيف مركبات مقوم اوكسيد الخارصين السيراميكي المتغير وتحسين خواصه الكهربائية, تم تحضير مركباته باضافة بعض الاكاسيد المعدنية وهي Bi2O3، Sb2O3، Co3O4، Cr2O3، وMnO2, حيث تم اختبار تاثيرها لوحدها اولا, وثانيا تم اضافة اكاسيد الاتربة النادرة (M2O3) مع الاكاسيد المذكورة اعلاه واختبار تاثيرها على المقاوم المتغير, حيث ان (M=Dy, La,Y) وبتراكيز مولية ( *10 - 3(1,5,10)).تمت عمليات التحضير والسيطرة على التركيب الدقيق عن طريق التحكم بظروف عمليات الحرق بدءا من عملية الاعداد بخلط اوكسيد الزنك مع الاكاسيد المضافة ومن ثم الحرق في درجة حرارة 600℃ وبمعدل 5 ℃⁄min في الفرن ولمدة ساعتين للعينات جميعها وذلك لازالة الغازات والرطوبة من المساحيق. بعد عملية الحرق تم كبس المساحيق بشكل اقراص بقطر 15mm وسمك 2mm تقريبا تحت ضغط يساوي 25MP.بعد عملية الكبس اجريت عملية التلبيد (تفاعلات الاطوار الصلبة والاطوار السائلة) بدرجات حرارة مختلفة ( 1050, 1100, 1150 ℃ ) وزمن ثابت للعينات جميعها مقداره ساعتين للحصول على الاشكال النهائية والوصول الى الخصائص المطلوبة.تمت دراسة بعض الخواص الفيزيائية للعينات المحضرة وهي الكثافة والمسامية والخواص التركيبية وذلك لغرض تقييم تاثير الاكاسيد المضافة وظروف التحضير على سلوك التطبيق الصناعي للعينات.وقد تبين ان مقدار الكثافة النسبية والمسامية تتاثر بدرجة حرارة التلبيد وبنسب تراكيز اكاسيد الاتربة النادرة المضافة ونوعها,فقد ازداد مقدار الكثافة بازدياد درجة حرارة التلبيد ونسبة او تركيز اكاسيد الاتربة النادرة المضافة ونتيجة لذلك فقد نقص مقدار المسامية.لقد اعطى اختبار التركيب المجهري للمادة المحضرة رؤية واضحة عن الانتشار والنمو الحبيبي , وان نتائج اختبار الاشعة السينية (XRD) اوضحت ان التركيب البلوري لها معيني قائم كما ان قيم (a, b, c) وحجم خلية الوحد قد ازداد بزيادة درجة حرارة التلبيد ونسب تراكيز الاكاسيد المضافة ونوعها.اظهرت الحبيبات النانوية والميكروية ضمن البحث الحالي تاثيرا كبيرا على الخصائص الكهربائية المدروسة والتي صممت لها اداة في المختبر لقياس معامل السلوك اللاخطي, مقدار جهد الانهيار , تيار التسرب, قابلية امتصاص الطاقة , انحدار الجهد وجهد الحدود الحبيبية.حيث تبين ان معامل السلوك اللاخطي يزداد بازدياد تركيز الاكاسيد المضافة وارتفاع درجة حرارة التلبيد ومن ثم يبدا بالنقصان بعد درجة (1100℃) بسبب تطاير وتبخر اوكسيد البزموث وطور(. (Zn7Sb2O12 بينما نقص مقدار جهد الانهيار وقابلية امتصاص الطاقة وانحدار الجهد بازدياد درجة حرارة التلبيد,اما تيار التسرب فقد ازداد مقداره بازدياد درجة حرارة التلبيد, وكذلك بالنسبة لجهد الحدود الحبيبية فقد ازدادت قيمها بازدياد درجة حرارة التلبيد. | ZnO is a ceramic material which tends to intrinsically form as an n - type semiconductor material, which plays an important role in a wide range of industrial processes and commercial products.One of most important usages is a Surge protection device which used to protect power and electronic equipment from the destructive transient overvoltage which arises from lightning or other large - magnitude surge, this device is called metal oxide varistor (MOV).Varistors are voltage dependent, non - ohmic devices whose electrical characteristics are almost similar to back - to - back Zener diodes.Improvement ZnO varistor performance accomplished by doping it by some metal oxides, Bi2O3, Sb2O3, Co3O4, Cr2O3, and MnO2, where they were testing their effect alone first, and second was added rare earth oxides (M2O3) with oxides mentioned above and test their effect on varistor, where (M = Dy, La, Y) and molar concentrations (10 - 3, 5*10 - 3, 10*10 - 3)The preparation process starts from mixing ZnO with additives, calcination at 600℃ in a furnace to remove the gases and the humidity from the powders. Then the calcined powders uniaxially pressed into discs (pellets) of 15 mm in diameter and 2 mm in thickness under a pressure equals to 25MP. After pressing the green pellets sintered under different temperatures (1050, 1100, 1150℃) and a fixed time to accomplish the final shapes and reach the desired properties of the samples.Then the densities of the samples were measured by using Archimedes Principle with mercury liquid to calculate the relative density and the porosity of each sample, and to study the effect of the sintering temperature and REO concentration, which already be obvious the effect of them. The microstructure test of the material prepared gave a clear vision for the diffusion and grain growth, although the results of XRD test showed that the crystal structure is an orthorhombic, and the values of (a, b, c) and the size of a the unit cell has been increased with increase the sintering temperature and ratios of the concentration of oxides added and kind.Micro and nano grains within the present research showed a significant effect on the studied electrical characteristics, which designed a tool in the laboratory for it and to measure the nonlinear coefficient, the amount breakdown voltage, leakage current, the potential gradient, the energy absorption capability, and the voltage per grain boundary. It was found that the nonlinear coefficient increases with the increasing of REO concentration added and increasing sintering temperature and then starts decreased after degree (1100℃ ) due to volatilization and evaporation of bismuth oxide and spinel phase (Zn7Sb2O12).The amount of breakdown voltage, potential gradient, energy absorption capability decreased with rising the sintering temperature, while the leakage current has been increased with increasing the sintering temperature, as well as the voltage per grain boundary has been increased with increasing of the sintering temperature.

دراسة بعض الخواص الفيزيائية للايبوكسي المدعم بدقائق نانوية == STUDY OF SOME PHYSICAL PROPERTIES OF EPOXY REINFORCE WITH NANO PARTICLES

اسم المؤلف: صفاء عبد صالح
اسم المشرف: وداد حمدي جاسم
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم استخدام مادة الايبوكسي (EP) مع نسب خلط حجمية مختلفة (1, 2, 3, 4, 5, 7, 10, 15 و20%) من الجسيمات الزركونيا ( 2(ZrO والمغنيسا ( MgO) النانوية ومن الجسيمات 2 ZrO وMgO المايكروية لتحضير متراكبات الايبوكسي النانوية ومتراكبات الايبوكسي المايكروية لفحص ودراسة بعض من خصائصها الميكانيكية (متانة الانحناءومعامل الانحناء ومتانة الكسر وقوة الصدمة والصلادة ) والخواص الكهربائية العزلية ( ثابت العزل الكهربائي وزاوية ظل الفقد والتوصيلية الكهربائية) والخواص الحرارية (التوصلية الحرارية ودرجة الانتقال الزجاجي)طريقة تحضير عينات الايبوكسي وعينات متراكبات الايبوكسي النانوية وعينات متراكبات الايبوكسي المايكروية تضمنت مراحل الخلط الميكانيكي ومجانس خلط الامواج فوق الصوتية واستخدام منظومة التفريغ. تم استخدام فحص الانحناء ذي النقاط الثلاث وفحص وقوة الصدمة وفحص الصلادة وفحص السعة الكهربائية العزلية وفحص الماسح التفاضلي السعوي الحراري وفحص مجهر المسح الالكتروني وفحص التوصيل الحراري لفحص عينات الايبوكسي ومتراكباتة النانوية والمايكروية وقد اظهرت النتائج التي تم الحصول عليها من فحص متانة الانحناء ذي النقاط الثلاث زيادة تدعيم الخصائص الميكانيكية لمتراكبات الايبوكسي الزركونيا النانوية ,ان نسبة 2% من الخلط تؤدي الى اعلى نسبة تدعيم لا متانة الانحناء بلغت 52% اما معامل الانحناء فتضاعف مرتين عند هذه النسبة وايضزاادة متانة الكسر لتصل الى 86% مقارنة مع نتائج عينة الايبوكسي واما قوة الصدمة فقد بلغت 51% وارتفعت صلادة المادة 5% نسبة التدعيم 2% . وقد ظهر الكسر اللدن بشكل واضح في بعض منحنيات الاجهاد - الانفعال في متراكبات الايبوكسي زركونيا.كما اظهرت الخصائص الميكانيكية لمتراكبات الايبوكسي مغنيسيا النانوية زيادة تدعيمها بزيادة نسب الخلط الحجمية لجسيمات المغنيسيا النانوي في التراكيز القليلة (< 5%) حيث اظهرت النسبة 4% من MgO اانانوية اعلى قيمة لقوة الانحناء حيث ازدادة بنسبة 47% مقارنة EP) ) في حين معامل الانحناء ارتفع بنسبة 74% مقارنة EP) ) في حين متانة الكسر لمتراكبات الايبوكسي مغنيسيا النانوية فتضاعفت بحدود اربع مرات عن الايبوكسي وقد بلغت قوة الصدمة 65% عند نسبة التدعيم وارتفعت صلادة المادة 3% مقارنة EP) ) لوحده. وقد ظهر الكسر اللدن بشكل واضح في منحنيات الاجهاد - الانفعال في متراكبات الايبوكسي مغنيسيا..الخصائص الميكانيكية لمتراكبات الايبوكسي زركونيا المايكروية ومتراكبات الايبوكسي مغنيسيا المايكروية اظهر انخفاض في خصائصها الميكانيكية بارتفاع نسب الخلط الحجمي للجسيمات المايكروية للزركونيا وللمغنيسيا ما عدا معامل الثني فقد زاد بارتفاع نسب الخلط الحجمي لجسيمات الزركونيا والمغنيسيا المايكروي.وهذا يظهر تفوق الجسيمات النانوية عن الاخرى المايكروية حيث اضافتها بنسب ضئيلة تؤدي الى تحسين ملحوظ في الصفات الميكانكية والتي يتم تفسيرها عن طريق الصور الماخوذة عن مجهر الماسح الالكتروني والتي اظهرت البنية التركيبة لسطح الكسر لمتراكبات الايبوكسي زركونيا النانوية ولمتراكبات الايبوكسي مغنيسيا النانوية بوجود شقوق نانوية عند نسب خلط حجمية معينة ,وقد بينت صور الكسر انتهاء اغلب الشقوق من التركيب بسب وجود الاضافات لجسيمات الزركونيا والمغنيسيا النانوية فكانت اقل ما يمكن في نسب2 % من نسب الخلط الحجمي لجسيمات الزركونيا النانوي وعند 4% من نسب خلط حجمي لجسيمات المغنيسيا النانوي. وهذا معزز من النتائج العملية التي حصلنا عليها عند هذه النسب الضئيلة الاضافة واثرها في تحسين الصفات الميكانيكية للايبوكسي.ان الخصائص الكهربائية العزلية لمتراكبات الايبوكسي زركونيا النانوية ولمتراكبات الايبوكسي مغنيسيا النانوية اظهرت زيادة تدعيم ثابت العزل الكهربائي عند نسب الخلط الحجمية الواطئة لجسيمات الزركونيا والمغنيسيا النانوية في حين في نسب الخلط العالية (> 10%) بداء ثابت العزل الكهربائي لمتراكب الايبوكسي مغنيسيا الناوني بالارتفاع عن اعلى نسبة تحسن في حين ثابت العزل الكهربائي لمتراكب الايبوكسي زركونيا بالانخفاض. في حين ان زاوية ظل الفقد لمتراكب الايبوكسي زركونيا النانوي تزداد زيادة طفيفة بزيادة نسب الخلط الحجمي لجسيمات الزركونيا النانوي في حين زاوية ظل الفقد لمتراكب الايبوكسي مغنيسيا النانوي تقل بنسب قليلة بزيادة نسب الخلط الحجمي لجسيمات المغنيسيا النانوي.التوصيل الحراري لمتراكبات الايبوكسي زركونيا النانوية ولمتراكبات الايبوكسي مغنيسيا النانوية لها نفس السلوك نسب خلط حجمية مختلفة (1, 2, 3, 4, 5, 7, 10, 15 و20%) ان التوصيل الحراري لكلا المتراكبتين (لمتراكب الايبوكسي زركونيا النانوي ولمتراكب الايبوكسي مغنيسيا النانوي) يزداد بزيادة نسب الخلط الحجمية لجسيمات زركونيا ومغنيسيا النانوية. تمتلك المتراكبات النانوية توصيل حراري اقل من المتراكبات المايكروية. اما المتراكبات النانوية فقد امتلك متركبت الزركونيا قيما اعلى للتوصيل الحراري مقارنة بمتراكبة المغنيسيا. | Epoxy with various mix ratio of concentration 1, 2, 3, 4, 5, 7, 10, 15 and 20% of ZrO2, MgO nanoparticles and ZrO2, MgO microparticles were used to prepare epoxy microcomposites and epoxy nanocomposites in order to study the several mechanical properties (flexural strength, flexural modulus , fracture toughness, impact strength and hardness) and electrical properties (dielectrical constant , dissipation factor and thermal conductivity) and thermal properties (thermal conductivity and Tg).The molding process was used to prepare epoxy and their nanocomposite and microcomposite samples using, ultrasonic homogenizer and shearing mixer. Three point bending examine, impact strength examine, hardness shore D examine, The LCR meter examine, Scanning Electron Microscope (SEM) examine and Differential Scanning Calorimeter (DSC) were used also.The results where obtained to form 3 - point bending examine illustrated that the mechanical properties of EP/ ZrO2 nanocomposites were increased with increasing concentration of ZrO2 nanoparticles. The ratio of about 2% vol. fraction lead to Maximum improvement in flexural strength was 52%. flexural modulus improvement was doubled at this ratio of vol. fraction, fracture toughness is improved about 86% at 2% vol. fraction, impact strength is improved about 51% at 2% vol. fraction , while hardness is improved about 5% at 2% vol. fraction comparing with results of epoxy sample. Ductile behavior appears in some stress - strain curves of obtained for EP/ ZrO2 nanocomposites. The mechanical properties of EP/ MgO nanocomposites were increased with increasing concentration of MgO nanoparticles at low volume fractions (˂ 5%) of MgO nanoparticles. Flexural strength improved 47% at 4% vol. fraction. Flexural modulus is improvement about 74% at 4% vol. fraction, fracture toughness is rise about four times at 4% vol. fraction. impact strength is improved about 65% at 4% vol. fraction, while hardness is improved about 3% at 4% vol. fraction . Ductile behavior almost appears in stress - strain curves of EP/ MgO nanocomposites. The mechanical properties for epoxy ZrO2/ MgO microcomposites reduce with increasing concentration of ZrO2/ MgO microparticles. this show nanoparticles overcome for others microparticles; thus addition quit small amounts .lead to particularly improvement in mechanical properties ,which can be explain through the pictures . Scanning Electron Microscope (SEM) pictures show the topography of fractured structure of EP/ ZrO2 nanocomposites and EP/ MgO nanocomposites with nanocracks of the epoxy structure at some of volume fractions of ZrO2/ MgO nanoparticles, while the topography of fractured structure show the nanocracks almost vanish from the structure because of adding ZrO2/ MgO nanoparticles was at minimum value at 2% vol. fraction of ZrO2 nanoparticles and 4% vol. fraction of MgO nanoparticles . this enhance by experimental results which we got it in the small raito addition .their influence to improve mechanical properties of epoxy. Dielectrical properties of EP/ ZrO2 nanocomposites and EP/ MgO nanocomposites show; Dielectric constant improved at low volume fraction of ZrO2/ MgO nanoparticles, while at higher concentration (> 10%) Dielectric constant of EP/ MgO nanocomposites stile increased and Dielectric constant begin to reduce in EP/ ZrO2 nanocomposites. Tan delta of EP/ ZrO2 nanocomposites little increase with increasing volume fraction ZrO2 nanoparticles, while Tan delta of EP/ MgO nanocomposites begin to reduce with increasing volume fraction of MgO nanoparticles.Thermal conductivity for EP/ ZrO2 nanocomposites and EP/ MgO nanocomposites have the same behavior with 1, 2, 3, 4, 5, 7, 10, and 15% vol. fraction. thermal conductivity of both EP/ ZrO2 nanocomposites and EP/ MgO nanocomposites increase with increasing the volume fraction. EP/ MgO nanocomposites and EP/ MgO nanocomposites have thermal conductivity lower than from EP/ MgO microcomposites and EP/ MgO microcomposites

الاستقرارية الفيزيائية - الكيميائية للمتراكبات PVA - MnSO4.H2O مع الظروف الجوية == Physico - Chemical Stability of (PVA - MnSO4.H2O) Composites against weather conditions

اسم المؤلف: زينب كاظم حمزة
اسم المشرف: اسرار عبد المنعم سعيد
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الدراسه تم تحضير افلام بولي فينيل الكحول وكبريتات المنغنيز المائي باستخدام تقنية الصب مع نسب وزنية مختلفة وهي (2, 5, 10, 15) من كبريتات المنغنيز المائي وقد تم دراسة الخصائص البصريه لها.وقد تضمن هذا العمل ايضا دراسة تاثير الظروف الجوية على الخصائص البصرية لكل النماذج المعرضة.كل النماذج المعرضة وغير معرضة للظروف الجويه شخصت بطرق مختلفة مثل التحليل الطيفي لاشعة تحت الت الحمراء (FTIR)وصور المجهر الضوئي.اظهرت النتائج التجريبية ان طيف الامتصاصيه يزداد بزيادة تركيز كبريتات المنغنيز المائي. فجوة الطاقة تقل بزيادة تركيز الاضافة. وقد تم دراسة الثوابت البصرية الاخرى والتي تشمل (معامل الامتصاص, معامل الخمود, معامل الانكسار, ثابت العزل الحقيقي والخيالي).بعدتعريض النماذج للبولي فينيل الكحول النقي وللمتراكبات (PVA - MnSO4.H2O) وبتراكيز مختلفه وجد ان طيف الامتصاص يزداد بزيادة فترة التعريض. فجوة الطاقه تقل بزيادة فترة التعريض. وقد تم دراسة الثوابت البصريه الاخرى والتي تشمل (معامل الامتصاص, معامل الخمود, معامل الانكسار, ثابت العزل الحقيقي والخيالي).وقد بين طيف (FTIR) عدم وجود تفاعل كيميائي بين المادة المضافة والبوليمر وليس هنالك تكسر بالاواصر الاساسيه لهما بعد التعريض للظروف الجوية, واظهرت صور المجهر الضوئي ان كل النماذج تصبح اكثر خشونة بعد التعريض. | In this study, (PVA - MnSO4.H2O) films are prepared by using casting technique with different concentration of Manganese (II) sulfates monohydrate (2, 5, 10 and 15) wt.% . Also the optical properties is studied, and this work is involved with study the effect of weathering condition of optical properties for all samples which exposure. All the samples that exposure and unexposure to weather conditions have diagnosed by different methods such as fouirer transform infrared spectroscopy (FTIR) and optical microscope images. The experimental results show that the absorption spectrum increased with increasing the concentration of (MnSO4.H2O). The optical energy gap decreasing with increasing of the concentration of the additive. The optical constants (absorption coefficient, extinction coefficient, refractive index, real and imaginary dielectric constants) are studied. After exposure the samples in the form of pure PVA and (PVA - MnSO4.H2O) composites with different concentration found that the absorption spectrum increases with increases exposure time. The optical energy gap decreasing with increasing exposure time. The optical constants (absorption coefficient, extinction coefficient, refractive index, real and imaginary dielectric constants) are studied. The FTIR shows no chemical interaction between the Polymer and the additives and there are no broken fundamental bands after exposure to the weather conditions. Morphological photographs illustrate that the surface of all films become more roughness after exposure.

تحضير درع متعدد الطبقات وحساب عامل التراكم باستخدام انواع مختلفة مم البوليمرات == Multilayered Shielding Preparation and Buildup Factor Calculation Using Different Type of Polymers

اسم المؤلف: زهير سالم خميس
اسم المشرف: محمد قاسم الفخار | حارث ابراهيم جعفر
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: واسط
الصفحات الاولى:
المستخلص: Due to the possibility of producing secondary radiation when a radiation is being attenuated by a certain type of radiation shield, the use of multilayer shielding appears very useful. This study aims to investigate the use of multilayer materials as nuclear radiation shielding.The work presented in this thesis focuses on the possibility of using polymer materials as a nuclear shield. This polymer (high density polyethylene and epoxy) is chosen due to different reasons among which are its local availability, the ease of mixing additives with it, light weight, and flexibility. The polymer as a single shield was investigated, where five different forms of the polymer were used as a single shield. These kind of shield are polymer (High Density Polyethylene HDPE, and Epoxy) alone, HDPE with a 38%by weight of Pb (as an additive), Epoxy with a 33%by weight of Pb, and Epoxy with a 33% by weight of Al (as an additive). The attenuation coefficient (μ), and buildup factor (B) were measured for all five forms and composition. In particular, the attenuation coefficients were found to increase with the increasing of the Pb or Al additive and decrease with gamma rays energy increase, while the buildup factor where decrease with the increase of the Pb or Al additive and increase with the increasing of energy.On the other hands, the multilayer shielding materials were chosen to be either Al or Pb slides (with different thickness) with a slide of 2.8cm of polymer (HDPE or Epoxy) in different repeated combinations. In order to evaluate the values of μ and B for this multilayer composition, the values of μ and B for each Pb and Al were evaluated. Then these two values were estimated for the different combinations of the multilayer shields. In particular, it was found that placing the low Z material (polymer) in front of the detector [NaI(Tl) detector] first and then high Z material before that

تقييم المقاطع العرضية لليورانيوم للتفاعلات المستحثة بالنيوترون == Cross Sections Evaluation of Uranium for Neutron Induced Reactions

اسم المؤلف: روناك اكرام علي
اسم المشرف: ايمان طارق العلوي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: لقد تم في هذا البحث حساب قيم المقاطع العرضية لنظائر اليورانيوم (A=230 - 238) للتفاعلات المستحثة بالنيوترونات التالية ,,,(n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), (n,γ), (n,p), (n,t), (n,d), (n,α), (n,2α),and (n,2p)المقاسة بفترات مختلفة من الطاقة حيث ان هذه القراءات تم اخذها من الوكالة الدولية للطاقة الذرية (IAEA ) ومن المكتبات المشهورة عالميا مثل EXFOR, CINDA, ENDF, JEFF, JENDL,ROSFOND,CENDL,WIND, TENDL, BROND, IRDF, EAF وقد تم قياسها في الفترة الاولى من منتصف القرن الماضي وحتى اخر سنوات الماضية .لقد تم تحليل المديات الكاملة للطاقة لكل تفاعل وقد تم اعادة حساب وتقييم المقاطع العرضية ضمن فترات صغيرة مختلفة حسب مديات الطاقة للنيوترون القاصف مع الاخطاء المرافقة لها. قد تم وضع صيغ رياضية لمتعددة الحدود في معظم التفاعلات والتي تربط بين تغيير المقطع العرضي مع الطاقة والتي يمكن استخدامها للتنبىء بقيم المقاطع العرضية غير المحسوبة. لقد تم حساب قيمة Q - للتفاعل وطاقة الربط وطاقة العتبة وفرق الكتلة وعامل الرص لكل تفاعل ولكل عنصر هدف. ان التقييمات اعتمدت بشكل رئيسي على حسابات نموذج الجهد البصري لقد اعتمدت الحسابات على معاملات الجهد البصري النووي حيث تم اختيار وجمع المعلومات من مكتبة (RIPL) التابعة للوكالة الدولية للطاقة الذرية. لقد قمنا بدراسة صيغتين مختلفتين لنموذج الجهد البصري حيث ان الصيغة الاولى تسمى نموذج الجهد البصري القياسي والمعاملات ماخوذة من مكتبة Beijing والصيغة الثانية لنموذج الجهد البصري قد تم حسابها بتحديد ثلاث مديات طاقية. لقد قمنا بدراسة نسبة التفاعل (n,f) لكل نظير من نظائر اليورانيوم نسبة الى يورانيوم - 235 والذي يعتبر نموذج قياسي. لقد قمنا بحساب هذه النسبة لجميع التفاعلات المتوفرة لدينا وليس فقط تفاعل الانشطار واحتسبناها نسبة الى يورانيوم - 235.حساب اخر تم اضافته الى هذه الدراسة وهو دراسة تاثير التلوث لوليدة اليورانيوم - 237 والتي هي نبتونيوم - 237 بعمر نصفي 6.8 يوم وكذلك حساب الفيض النيوتروني لكل منهما. | The cross sections of Uranium isotopes (A=230 - 238) for the (n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), (n,γ), (n,p), (n,t), (n,d), (n,α), (n,2α),and (n,2p) reactions are calculated with different energy intervals which are collected from International Atomic Energy Agency (IAEA). The available cross sections data for the reactions mentioned above are collected from the well known international libraries like EXFOR, CINDA, ENDF, JEFF, JENDL, ROSFOND, CENDL, WIND, TENDL, BROND, IRDF, EAF and measured during the period from the middle of the last century up to several years ago.The cross sections are reproduced in fine steps of incident neutron energy in different intervals with the corresponding errors. The recommended cross sections for all available experimental data have been calculated for all considered reactions mathematical representative equations for all these reactions are formulated. These equations represent the variation of the cross section with energy, which could be used to predict the values of uncalculated cross sections.Q - value, threshold energy, binding energy, mass excess, and packing fraction for each reaction and target element have been also calculated.The evaluations are based mainly on the calculations of the optical model potential. The calculations are based on the nuclear optical potential, where the relevant parameters are collected and selected from Reference Input Parameter Library (RIPL) which is being developed under the international project coordinated by the International Atomic Energy Agency (IAEA). We study two different formula for optical model potential the first formula is the standard optical potential model and its parameters are taken from Beijing library. The second formula is the optical potential with different energy ranges. We study the ratio of the (n,f) cross sections for each Uranium isotopes relative to (n,f) cross section for U - 235 which could be considered as a standard sample. We have done the ratio not for the (n,f) cross sections only but also for other reactions like ,(n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), and (n,γ) relative to U - 235 reactions cross sections.Another evaluation is added to cross sections is the effect of the contamination of the daughter of U - 237 which the daughter is Np - 237 6.8day and their relative flux

دراسة التركيب المتهيج للنوى زوجية - زوجية ذات العدد الذري Z= 50, 48, 46 في المستوى المتهيج الاول == Study of Excited Structure for Even - Even Nuclides of Z = 50, 48, 46 in The First Excited State

اسم المؤلف: رسل سعد هادي
اسم المشرف: فاطمة عبد الامير جاسم
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: درست الخواص الكهرومغناطيسية للنظائر زوجية - زوجية للنوى 48Cd , 50Sn و46Pd الغنية بالنيوترونات من خلال قوى الانتقال لرباعي القطب الكهربائي |M(E2)|2 W.u ↓ واحتمالية الانتقال المختزل B(E2)W.u ↓ لانتقال اشعة كاما من المستوى المتهيج الاول الى المستوى الارضي. حيث تم حساب قوى الانتقال لرباعي القطب الكهربائي |M(E2)|2 W.u ↓ بالاستعانة بمعدل العمر للمستوى المتهيج الاول والشدة النسبية لاشعة كاما المنبعثة من ذلك المستوى, بينما قيم احتمالية الانتقال المختزل B(E2)W.u ↓ استخرجت من خلال عمر النصف للمستوى المتهيج الاول المصحح لمعامل التحول الداخلي.وللحصول على قيمة دقيقة لانتقال رباعي القطب الكهربائي ↓ E2, تم حساب ورسم القيم المتبناة لكل من |M(E2)|2 W.u ↓ وB(E2)W.u ↓ كدالة لعدد النيوترونات.في هذا البحث, تم تحويل القيم المتبناة لانتقال ↓E2 الى قيم احتمالية الانتقال المختزل B(E2) ↑ e2b2 والتي افادتنا في دراسة تركيب النوى من حيث الاختلاف في الشكل لان عامل التشوه β تم استخراجه من B(E2) ↑ e2b2, كما ان دراسة تاثير عدد النيوترونات على سلوك كل من B(E2) ↑ e2b2 وβ في المتسلسلات الايزوتونية لنوى 48Cd , 50Sn و46Pd يعطي معلومات جيدة حول التشوه في النوى.تركزت دراستنا على ثلاث انواع مختلفة من النوى, الاول بعدد ذري سحري50 , والثاني بعدد ذري شبه سحري 48, والثالث بعدد ذري بين القشرات المغلقة 46.في نهاية العمل الحالي تم عمل مقارنة جيدة للحسابات الحالية لقيم احتمالية الانتقال المختزل B(E2) ↑ e2b2 وعامل التشوه β مع معظم القيم العملية والنظرية الحديثة. | Electromagnetic properties for even - even nuclides in neutron - rich nuclei such 50Sn, 48Cd and 46Pd have been studied through the electric quadruple transition strength |M(E2)|2 W.u ↓ and the reduced transition probability B(E2)W.u ↓for γ0 - transition from first excited state to the ground state. The electric quadruple transition strength |M(E2)|2 W.u ↓ is calculated by using life - time for excited state with the intensity of γ0 - transition, while B(E2)W.u ↓ is extracted from half - life time to state corrected for internal conversion coefficient. To obtain precise value for the transition of E2↓, the adopted value for |M(E2)|2 W.u ↓ and B(E2)W.u ↓ was calculated and plotted as a function for neutron number. In present work, the adopted values for the transition of E2↓ are converted to B(E2)exp ↑ e2b2 which helped us to study the structure for nucleus, such as the variation in shape, because the deformation parameter β is extracted from B(E2) ↑ e2b2 and the study for behavior of each of B(E2) ↑ e2b2 and β versus neutron number in isotonic chains to 50Sn, 48Cd and 46Pd gives good information about the deformation in nuclei. Our study focused on the three different types of nuclei, the first with atomic magic number 50, the second with semi - magic atomic number 48 and the third nucleus with atomic number between closed shells 46. At the end of the present work, the good comparisons for the present calculation to the values of the B(E2) ↑ e2b2 and β with most recent values of experimental and theoretical was done.

تصميم مراة ايونية تعمل كمصحح للزيوغ باستخدام طريقة القيم الحدودية == DESIGN OF ION MIRROR AS AN ABERRATION CORRECTOR USING BOUNDARY VALUES METHOD

اسم المؤلف: محمد سلام مزاحم العبيدي
الموضوع العام: علوم الفيزياء
السنة: 2007
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

تصحيح الزيغ بسبب عدم التراصف في العدسات الكهروسكونية == THE ABERRATION CORRECTION DUE TO MISALIGNMENT IN ELECTROSTATIC LENSES

اسم المؤلف: رؤى تحسين عبد الله الصميدعي
اسم المشرف: احمد كمال احمد
الموضوع العام: علوم الفيزياء
السنة: 2006
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: اجري بحث حاسوبي في مجال بصريات الجسيمات المشحونة. يهتم البحث بتصميم منظومات عدسات كهروسكونية بوجود وعدم وجود تاثير عدم التراصف تعمل تحت ظروف تكبير مختلفة.ان توزيع مجال الجهد لعدسه احادية الجهد وعدسة مغمورة كهروسكونية تم تمثيله بدوال تحليلية. تم حل معادلة الاشعة المحورية للمجالات المقترحة لايجاد مسار الجسيمات المشحونة المارة في كل عدسة. ومن توزيع الجهد المحوري ومشتقتيه الاولى والثانية .تم حساب الخواص البصرية كالبعد البؤري والزيغين الكروي واللوني. كذلك تم ايجاد شكل اقطاب كل عدسة كهروسكونية ببعدين وبثلاثة ابعاد. ويعتمد الزيوغ في العدسات الكهروسكونية اعتمادا كبيرا على تراصف الاقطاب، وقد وجد انه عامل مهم يؤثر على الشكل الهندسي لمنظومة العدسة الكهروسكونية. ان نتائج هذه الدراسة لا تبرهن نظريا" امكانية تصميم منظومات عدسة كهروسكونية بزيوغ واطئة فحسب بل تبين امكانية تصنيع مثل هذه العدسات عمليا". | A computational investigation has been carried out in the field of charged - particle optics. The work is concerned with the design of electrostatic lenses with and without misalignment effect operated under different magnification conditions. The potential field distributions of einzel and immersion electrostatic lenses have been represented by analytic functions. The paraxial ray equation has been solved for the proposed fields to determine the trajectory of the charged particles traversing each lens. From the axial potential distribution and its first and second derivatives, the optical properties such as the focal length and spherical and chromatic aberrations have been compute. The electrode shape of each electrostatic lens has been determined in the two - and three - dimensions. The aberration of the electrostatic lens is highly dependent on the alignment of the electrodes and it has been found to be an important parameter affecting the geometry of the electrostatic lens system. The results of this investigation not only prove in theory the possibility of designing electrostatic lens systems with low aberration but also show the possibility of constructing such lenses in practice

تاثير نسب ومعاملات الحزم على دقة تصنيف صور الاقمار الصناعية المتعددة الاطياف == Effect of Band Ratios and Indices on Classification Accuracy of Multispectral Satellite Images

اسم المؤلف: سيف كامل شنين
اسم المشرف: اياد عبد العزيز العاني | صلاح عبد الحميد صالح
الموضوع العام: علوم الفيزياء
السنة: 2008
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Multispectral satellite images are holding whole information about the areaunder investigation. Many of digital processing techniques are used to extractmost of the possible information from these images, such these techniques arespectral band ratios, Tasseled Cap transformation and Principle ComponentAnalysis (PCA). These techniques are play good part for features extraction andreducing the number of spectral bands with no loses in information.The research aims to apply classifications on band ratios and image indiceswhich include PCA and Tasseled Cap transformations, of Enhanced ThematicMapper Plus (ETM+) satellite images, and to show how the accuracies of theclassification are differ from the accuracy of classification of the raw ETM+ bandsimages.The results show that the best bands ratios that adopted to represent fiveselected land features are 5/7, 4/5, 2/5, 1/4, and 2/4. Optimum Index Factormethod (OIF) has been adopted on raw bands combinations, and on the bandsratio combinations to select which band combination that contains muchinformation, where the results show that the best combination for raw bands is3 - 4 - 7, and best combination for ratios band is 4/5 - 1/4 - 2/5.Iterative Self Organizing Data Analysis (ISODATA) method has beenadopted as unsupervised classification, and Maximum Likelihood method assupervised classification. The overall accuracies are 87.18%, 89.45%, 89.26%,and 89.52% for raw bands, band ratios, Tasseled Cap, and PCA respectively,which showed that transformation techniques give good spectral enhancementsand feature extraction which are undistinguishable in raw image, and representgood tools to increase the accuracy of classification.

دراسة تاثيرات خسارة الانحناءات لليف البصري في منظومة الاتصالات البصرية == Study Effects of Optical Fiber Bending Loss in Optical Communication System

اسم المؤلف: دعاء هشام محمد
اسم المشرف: سمر يونس الدباغ
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا البحث , تم دراسة تاثير الانحناء على انتقال الاشارة الضوئية خلال الالياف البصرية. هذا العمل يتضمن قياسات الخسارة في القدرة خلال الليف البصري بوجود الانحناءات عند عدد لفات مختلفة من (1 - 10) لفة وعند اقطار انحناء مختلفة (12.5 , 10.5 , 8 , 6 , 4 , 3 , 2 , 1) cm. نوعين من الالياف البصرية تم استخدامها , الليف المتعدد الانماط (MMF ) باطوال مختلفة (1 , 20 , 40 , 100 , 120 , 140 ) m وليف احادي النمط بطول (4.5 m) .واستخدم نوعين من الليزرات ليزر دايود الاحمر (λ=650 nm) وليزر دايود اخضر (λ=532 nm).القدرة الضوئية تم قياسها باستخدام جهاز قياس القدرة. تشير النتائج ان كلما قل قطر الانحناء وزادت عدد اللفات فان الخسارة في القدرة الضوئية تزداد. حيث ان القدرة الضوئية لليزر الاخضر عند الطول الموجي (λ=532 nm) تقل من (48.083*10 - 4) mW الى (41.114*10 - 4) mW عند اللفة الاولى لليف متعدد الانماط بطول (40m) عندما تم حني الليف من cm12.5 الىcm 1. اما لليف الاحادي النمط, فان القدرة الخارجة لليزر الاخضر عند طول موجي (λ=532 nm) تقل من (13.608) mW الى (13.32) mW عند اللفة الاولى من طول (4.5) m لليف احادي النمط عندما تم حني الليف من 12.5 cm الى 3 cm . اظهرت النتائج ايضا ان تاثير الانحناء في القدرة الخارجة في حالة الليف المتعدد الانماط اكبر مقارنة بالليف احادي النمط. وكذلك النتائج لهذا البحث تتضمن تصميم وتنفيذ منظومة اتصال الالياف البصرية لفحص تاثير الانحناء على الاشارات المنتقلة خلال الالياف البصرية متعددة الانماط حيث لف من (1 - 10) لفة وعند اقطار انحناء مختلفة ( 1,2,3,4 ) cm . تم تضمين الاشارات باستخدام ليزر nm 532 .الاشارة تم ارسالها خلال ليف متعدد الانماط باطوال مختلفة وهذه الاشارة تم الكشف عنها باستخدام كاشف السليكون الضوئي (AEPX 65) . وجد ان الانحناءات تؤدي الى تغييرات واضحة في سعة ( جهد ) الاشارة الخارجه ؛ حيث يقل الجهد من 0.64volt الى 0.52 volt عند زيادة عدد اللفات من) 1 - (10 لفة في ليف بطول 40m وقطر الانحناء (1) cm.ويقل الجهد الى حد 0.2 volt في ليف بطول 140m وقطر الانحناء (1) cm.واخيرا الاشارات المنتقلة فيمنظومة الياف بصرية باستخدام كاميرا (CCD) واستخدام حاسبة شخصية معUSB TV STICK لرؤية تاثير الانحناء على انتقال الاشارات خلال الالياف البصرية. حيث ان الاشارة الخارجة ستقل من 0.68 volt الى 0.6 volt عندما عدد اللفات تزداد من (1 - 5) لفة في ليف بطول (1) m .اجرى احتساب كل من نسبة الاشارة الى الضوضاء ومعدل الخطا في نقل البيانات في للاشارات المنتقلة في منظومة الاتصالات عند اقصى طول لليف البصري 140m وعند اللفة 10 فكانت 115.147dB و3.68x10 - 27 على التوالي . بينما نسبة الاشارة الى الضوضاءSNR ومعدل الخطاBER في نقل البيانات في الاشارات المنتقلة باستخدام كاميرا CCD عند طول الليف البصري 1m وعند اللفة 10 فكانت 100.49dB و5.98x1o - 24 على التوالي .. اظهرت النتائج ايضا ان نسبة الاشارة الى الضوضاء تقل ومعدل الخطا في نقل البيانات يزداد بزيادة عدد اللفات في كلا المنظومتين | In this work, bending loss effects of optical fiber on the transmitted signal were studied.This work includes measurements of the power loss through optical fiber with the presence of bends at different wrapping turns (1 - 10) turns and at various bending diameters (12.5, 10.5, 8, 6, 4, 3, 2, and 1) cm. Two types of optical fibers were used, multimode optical fiber (MMF) of different lengths (1, 20, 40, 100, 120, 140) m and a single mode optical fiber (SMF) of length (4.5 m). Two optical sources were used, Red laser diode (λ=650 nm) and green laser diode (λ=532 nm). The output power was measured using an optical power meter. Results indicated that as the bending diameter decreased and the number of wrapping turns increased, the power loss increased. The output power of green laser diode at (λ=532 nm) decreased from (48.083*10 - 4) mW to (41.114*10 - 4) mW at the first turn of 40m MM fiber length when bent from (12.5 to 1) cm. For SMF, the output power of green laser diode at (λ=532 nm) decreased from (13.608) mW to (13.32) mW at first turn of (4.5) m SM fiber length when bent from (12.5 to 3) cm. The higher alteration output power in the case of multimode fiber has been deduced as compared with that of the single mode fiber. Also the results of the project involves a design and an implementation optical fiber communication system to investigate the effect of bending on the transmitted signals through multimode optical fiber wrapped (1 - 10) turns and at different diameters (1, 2, 3, 4) cm . Signals were modulated using 532nm laser diode then sent through multimode fiber of different lengths and detected by silicon photo detector (AEPX 65). The bending induces changes in the amplitude (voltage) of the output signal, the output voltage decreased from 0.64 volt to 0.52 volt when the no. of turns increased from 1 - 10 turns for 40 m optical fiber at a bending diameter of (1cm) and decreased to 0.2 volt for 140m multimode fiber at a bending diameter of (1cm).Finally, a transmitted signal in optical communication system has been built using CCD camera and Pc with USB TV STICK for monitory the effect of bending on signals that transmitted through optical fibers. The output transmitted signals decreased from 0.68 volt to 0.6 volt when the no. of turns increased from 1 - 5 turns for 1 m optical fiber. The calculations of signal to noise ratio (SNR) and Bit Error Rate (BER) for transmitted signals in optical communication system at maximum fiber length of 140m and 10turns are equal to 115.147dB and 3.68x10 - 27 respectively. While for transmitted signal form CCD camera at fiber length 1m and of 10 turns are equal to 100.49dB and 5.98x1o - 24 respectively.Results show that SNR decreased and BER increased as no. of wrapping turns increased for both systems.

محاكات الهوائي الكسوري باستخدام منحني كوج ومينكوسكي == Simulation of Fractal Antenna Using Koch and Minkowiski Curves

اسم المؤلف: خضير عباس قنبر
اسم المشرف: كاظم جواد كاظم الشجيري
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: الهوائي عنصر رئيسي في الاتصالات اللاسلكية فهو الادات التي تستقبل وترسل الموجات الكهرومغناطيسية في الفضاء الحر. ان التوسع الهائل في الاتصالات اللاسلكية بحاجة الى هوائيات متعددة الحزم وصغيرة الحجم وبمقطع جانبي منخفض ومن اجل تطوير اداء الهوائيات استخدمت الهندسة الكسورية لتحسين خواصها . والتي تجعل الهوائي متعدد الوظائف . في هذة الرسالة استخدمت تقنية جديدة لتحسين اداء الهوائيات الكسورية ثنائية القطب باستخدام عاكس كسوري متحرك. استخدمت الحقيبة البرمجية 4NEC2 لمحاكاة اول ثلاث تكرارت لهوائيات منحني Koch ومنحني Minkowski قبل وبعد اضافة العاكس الكسوري . ومن اجل تصميم الهوئيات بدقة عالية استخدم البرنامج Adobe illustrator CS4 لرسم جميع الهوائيات المقترحة . ومن نتائج المحاكاة لوحظ ولجميع الهوائيات ان العاكس الكسوري المتحرك حسن من قيمة VSWR (نسبة فولتية الموجة الواقفة) والكسب والتوجية وكذلك زاد الترددات الرنينية المفيدة للتكرارات الثلاثة لمنحني Koch . حيث اضاف تردد رنيني مفيد للتكرار الاول وترددين رنينيين مفيدين للتكرار الثاني وتردد رنيني للتكرار الثالث كذلك اضاف ترددين رنينيين مفيدين للتكرار الثالث لمنحني Minkowski . | Antenna is the main element in wireless communication. It is the instrument which receives and transmits the electromagnetic wave in a free space. The great expand in wireless communications need antennas with multiband, small size and low profile. In order to develop the performance of antennas, fractal geometry is used to optimize the property of the antenna. It makes antenna multi - functional. In this thesis a novel technique is used to optimize the performance of fractal dipole antennas by using a movable fractal reflector. 4NEC2 software package is used to simulate the first three iterations for (Koch curve and Minkowiski curve) antennas before and after adding the fractal reflector. In order to design fractal antennas with high accuracy, Adobe illustrator CS4 software program is used to draw all proposed antennas. From simulation results and for all proposed antennas are observed the movable fractal reflector optimize the value of voltage standing wave ratio VSWR, gain and directivity. Also, it increases the benefit resonant operating frequencies for all three iterations of the Koch curve. It adds one benefit resonant frequency to the first iteration and two benefit resonant frequencies to the second iteration and one benefit resonant frequency to the third iteration. Also, it adds two benefit resonant frequencies to the third iteration of Minkowiski curve

غشاء ZnO - SnO2 وخصائصه التحسسية == ZnO - SnO2) Thin Film and Their Sensing properties

اسم المؤلف: خالد وليد صابر
اسم المشرف: علي جاسم محمد الجابري
الموضوع العام: علوم الفيزياء
السنة: 2013
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ZnO,SnO2,Zno - Sno2 composite( ل في هذا البحث تم دراسة الخصائص التركيبية والتحسسية على توالي والمحضرة على قواعد قواعد زجاجية بظروف ترسيب مختلفة من نسب المواد (100% : 0%,0% : 100%, 50% : 50%, 30% : 70% , 10% : 90% ) وبدرجة حرارة القاعدة ( 400 & 450 ) سيليزية وبزاوية رش ( 0& 45 ) درجة. بينت فحوصات تقنية حيود الاشعة السينية (XRD) لتشخيص طبيعة تبلور الاغشية المحضرة, ان جميع الاغشية المحضرة ذات تركيب متعدد التبلور من نوع سداسي hexagonal)).مع اتجاهيه (002 ) للعينات المحضرة ل) ( ZnO,ZnO : SnO2 compositeما عدا (SnO2 ) فهو ذو تركيب متعدد التبلور من النوع الرباعي ( tetragonal ) مع اتجاهية ( 110 ) ، كما اظهرت النتائج الحصول على التركيب نانوي بمعدل حجم حبيبي ( من 2.4 الى 46 نانو) وتجانس منتظم بواسطة اضافة اوكسيد القصدير الى اوكسيد الزنك ، وهذا اعطى تبلور عالي مع ظروف الترسيب المختلفة. بواسطة تحليل السطح بواسطة المجهر الالكتروني الماسح ( SEM ) ومجهر القوة الذرية ( AFM ) تم التعرف على تاثير ظروف الترسيب المختلفة على خصائص تشكل العينات ، اظهرت صور (SEM ) تراكيب مختلفة مثل الابر والالياف والقضبان السداسية النانوية و(rich particle ) كما اظهرت النتائج التجانس والتوزيع المنتظم والنمو العالي ، كذلك زيادة معدل الحجم الحبيبي وزيادة الخشونة وهذا يقود الى الحصول على مساحة سطحية عالية وتاثير كبير على التحسسية .كل القياسات التحسسية اظهرت تحسسية عالية عند درجة حرارة القاعدة ( 450 ) سيليزية بزاوية رش (45 ) درجة ونسبة (SnO2 50% : % 50 ZnO) وعند زيادة نسبة ( ZnO ) لتصبح (100 % ) فان التحسسية تقل. ان العامل المؤثر على التحسسية هو نسبة المواد الداخلة في تركيب الاغشية الرقيقة كافضل نسبة حجمية 50)٪ 50 : ٪( وعند زيادة نسبة لتصبح 100٪ اوكسيد الزنك فان التحسسية تقل . اوكسيد الزنك لديه تحسسية عالية، ولكن عندما يخلط مع SnO2، وهذا يؤدي الى زيادة تحسسية وهذا واضح من خلال النتائج المستحصلة. | In this work, structural and sensing properties have been studied for ZnO, SnO2 compound and ZnO - SnO2 composite thin films. They were prepared by spray pyrolysis technique deposition at substrate glass, were used different deposition conditions, volume ratios(100% : 0%, 0% : 100%,50% : 50%, 70% : 30%, 90% : 10%,), Substrate temperature ( 400)&(450) oC , incident angle spray of spray pyrolysis (0) & (45) .. The X - ray diffraction technique has showed that all prepared films are polycrystalline structure with hexagonal type that preferred orientation of plan (002) direction for all thin film prepared for ( ZnO compound, ZnO - SnO2 composite thin films) except SnO2 thin films are polycrystalline structure with tetragonal type with preferred orientation of plan (110) , the results obtained by X - ray diffraction showed that we get the installation of nano structure with average grain size between ( 2.4 to 46 nm) and uniform Homogeneity by added tin oxide to zinc oxide, the results show high crystalline with deferent conditions deposition. Surface analysis by SEM and AFM have been used to understand the effect of the different conditions deposition on morphology properties of the samples. The SEM micrographs show needle - like, fiber - like , hexagonal nano rods, rich particles ( high growth) and homogeneity , uniform distribution, high growth. The results showed an increase of the average grain size with increasing roughness and this leads to obtain a high surface area and large effect on sensitivity. Overall measurements sensing showed that the highest of sensitivity at substrate temperature (450 oC) ,incident angle spray pyrolysis (45) with ratio ( 50% : 50%) . The influencing factor on sensitivity is the ratio of materials involved in the structure of thin - film as the best volume ratio its (50% : 50%) and when you increase the ratio to become 100%ZnO the sensitivity decreases. ZnO has high sensitivity, but when mixed with SnO2, this leads to increase sensitivity and this is clear from the results that were obtained.

التدريع الفعال لغرف الاشعة السينية التشخيصية == Effective Shielding For X - ray Diagnostic Rooms

اسم المؤلف: حيدر صادق جعفر
اسم المشرف: عبد الله احمد رشيد
الموضوع العام: علوم الفيزياء
السنة: 2013
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: وفقا لمصطلحات الاشعة السينية التشخيصية الطبية فان الاشعاع يتكون من الاشعاع الاساسي والاشعاع الثانوي .ان عملية وضع حواجز كالجدران التي تعترض الاشعاع الاساسي تدعى بالتدريع الاساسي في حين ان وضع حواجز للحماية من الاشعاع الثانوي تدعى بالتدريع الثانوي. في هذا العمل نتفحص حالة التدريع للحواجز الثانوية لغرفة التصوير الشعاعي للثدي والحواجز الاساسية لغرفة الاشعة السينية للصدر الرقمية في مستشفى الحسين التعليمي في مدينة كربلاء. باعتبار تصاميم غرف التصوير الشعاعي للثدي والاشعة السينية للصدر الرقمية ولمحة عن اجهزة التصوير الشعاعي المستخدمة فانه تم احتساب حمل العمل الكلي السريري لكل اسبوع وحمل العمل الكلي لكل مريض كما تم تحديد توزيعهما وفقا للفولتيات الاكثر استعمالا من خلال اختيار عشوائي للقيم التقنية السريرية الفعلية للــ mAs)) وقيم ذروة الكيلو فولت المناظرة لـ (2191) حالة تشخيص على مدى ثمانية اشهر لغرفة التصوير الشعاعي للثدي و(1402) حالة تشخيص على مدى اربعة اشهر لغرفة الاشعة السينية للصدر الرقمية. كمصدر لتدريع اشعاع الاشعة السينية التشخيصية فان تقرير المجلس الوطني للحماية من الاشعاعات والمقاييس رقم 147NCRP report No.147 )) وبرنامج الكمبيوتر (XRAYBARR) قد تم استخدامهما لحساب اسماك الحواجز الثانوية لغرفة التصوير الشعاعي للثدي والحواجز الاساسية لغرفة الاشعة السينية للصدر الرقمية . لغرفة التصوير الشعاعي للثدي فقد وجد ان حمل العمل الكلي في الاسبوع وحمل العمل الكلي لكل مريض كانتا تقريبا تساوي ما يحدده تقرير ان سي ار بي رقم 147 ( NCRP report No.147 ) لنفس عدد المرضى. الاسماك المطلوبة من الجبس والخشب كانا حوالي 4 ملم , 20 ملم على التوالي في حين ان الاسماك الفعلية الموجودة اعلى من هذه القيم. لغرفة الاشعة السينية للصدر الرقمية فقد وجد ان حمل العمل الكلي في الاسبوع كان بحدود 4.2 اضعاف ما يوصي به تقرير ان سي ار بي رقم 147 (NCRP report No.147 ) في حين ان حمل العمل الكلي لكل مريض كان بحدود خمسة اضعاف ذلك الذي يحدده تقرير ان سي ار بي رقم 147 ( NCRP report No.147 ) لنفس عدد المرضى لكل 36 ساعة عمل فعلية في الاسبوع لحالة ناشطة. السمك المطلوب من الرصاص كحاجز اساسي كان 2.7 ملم او 184 ملم من الخرسانة . في الواقع لم يكن هناك رصاص كحاجز اساسي بدلا عن ذلك فان مواد اخرى مثل الطابوق والخرسانة وجدت باسماك عالية كفاية لاستخدامها كحاجز تدريع اساسي.عظام الحيوانات استخدمت كاساس لاعداد اربعة نماذج من تركيبات مختلفة. هذه النماذج فحصت ضد اشعاع الاشعة السينية الاساسي عند جهود انبوب kvp 50 kvp 60 kvp 70 kvp 80 وkvp 90 باستخدام جهاز قياس معدل الجرعة minitracey. الانتقال النسبي , معاملات الملائمة باستخدام نموذج ارتشر Archer model , طبقة النصف ذات التوهين العالي ونسب التدريع لنماذج الانواع الاربعة حسبت وقورنت مع بعضها البعض. الكثافات وطبقات النصف ذات التوهين العالي عند kvp 50 وkvp 70 لنماذج الانواع الاربعة قورنت مع الكثافات وطبقات النصف ذات التوهين العالي لمواد التدريع الشائعة والمبتكرة. لقد وجد ان طبقات النصف ذات التوهين العالي لنماذج الانواع الاربعة افضل من طبقات النصف ذات التوهين العالي المواد الشائعة والمبتكرة. يستنتج من ذلك ان هذا النوع من المواد ستكون مفضلة كمادة تدريع ضد اشعاع الاشعة السينية الثانوية.
1 ... 31 32 33 34 35 ... 66