Show: 25 50 75 100 Results

Search results: 25 out of 566

استخدام خوارزميات العمليات الهندسية للصور الثابتة == Algorithm of image operation that using in still image.

Author name: قحطان عباس نعمان الجبوري
Supervisor name: علي عبد داود الزكي | كاظم جواد كاظم
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: Arabic
University location: Baghdad
First pages:
Abstract: تم في السنوات القليلة الماضية تطوير العديد من انظمة المحاكاة في توليد الحركة لتكوين صورة متحركة في تطبيقات عديدة منها انظمة السيطرة والتدريب والسينما الحديثة وتوليد الرسوم المتحركة . ان اغلب انظمة محاكاة وتوليد الحركة تعتمد بشكل اساسي على العمليات الهندسية التي يمكن اجرائها على مستوي الصورة او على نقطة او هدف في الصورة لذا توجهنا في بحثنا لدراسة هذه العمليات الهندسية وتاثيرها على جودة الصورة وكفاءة توليد الحركة.هذه الدراسة تم فيها اقتراح خوارزميات لاجراء العمليات الهندسية الاساسية (النقل ، تغيير المقياس، القص ، التدوير) وكذلك تم استحداث عملية هندسية سميت بالتقييس النسبي . وعند اجراء اية عملية هندسية قد لاتكون مراكز عناصر الصورة الناتحة بعد المعالجة في مواقع صحيحة لذا يجب اعادة تشكيل الصورة من جديد ويتم ذلك عن طريق الاستكمال الرياضي ، وتوجد طرائق عديدة للاستكمال الرياضي، وفي هذا البحث تم تطبيق ثلاث طرائق هي الاستكمال الثنائي لاقرب جوار والاستكمال الثنائي الخطي والاستكمال الثنائي التكعيبي ولمعرفة افضل طريقة من تلك الطرائق تم حساب معدل مربع الخطا العياري NMSE بين الصور المعالجة والناتجة من التحويل العكسي لاية عملية هندسية والصور الاصلية . لقد اظهر الاستكمال الثنائي التكعيبي نتائج افضل عند استخدام العمليات الهندسية الاساسية ، اما عند استخدام عملية التقيس النسبي نلاحظ ان للاستكمال الثنائي لاقرب جوار نتائج افضل من الطرائق الاخرى للاستكمال . فضلا على ذلك تم في هذه الدراسة تصميم برنامج لتوليد حركة لجسم محدد في الصورة من خلال استخدام العمليات الهندسية ، حيث تم توليد حركة في مستوي صورة ولحالات متعددة (حركة نقل ، حركة تدوير، حركة قصية، حركة تغير المقياس وحركة التقيس النسبي اضافة الى الدمج بين عملية النقل وبعض العمليات الهندسية لتوليد الصور بحالات مختلفة. | In few years ago , are developed many of simulation systems in moving generation to grated movie image in several application as in control system , training system ,modern cinema and movie painting . The most of simulation systems and movie generation are basic depended on image operation that carrying out on the level of image or part of image or target in the image therefore, we tend in this search to studies image operation that is effected of image quality and coefficient moving generation . This study we suggested many algorithm to applying basic geometric image operation (transition , scaling , shearing , rotation ) , as wall suggested new image operation is relative scaling . When we perform any image operation the position in many of pixel did not integer , for that reason we must forming this image by mathematical interpolation . There are many interpolation methods and in this study we used three methods are bi nearest interpolation , bi leaner interpolation and bi cubic interpolation . For we know best method we calculated normalized mean square error between process images these are forming form inverse transformations for any operation and origin image . In analysis results we shown the bi cubic interpolation had efficiency at using basic image operation , other than in relative scaling we shown the bi nearest interpolation best result from other methods . Other than, in this research we design program to generated moving object in image by using image operation that is generation moving in level of the image in many cases moving of the ( transition, rotation , shearing ,scaling and relative scaling) , as well it merge between transition and some geometric operation to created image in different way

المقاطع العرضية للانوية المركبة المتكونة من تفاعلات (n,p) و(p,n)

Author name: فردوس سامي حسين الياسري
Supervisor name: ايمان طارق العلوي
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: The cross sections for (p,n) and (n,p) reactions were calculated according to the available International Atomic Energy Agency (IAEA) libraries and other experimental published data. The well known international libraries like EXFOR, ENDF, JENDL, JEF, JEFF, BROND, CENDL, contain some cross sections measured during the period from the middle of the last century up to several years ago.This study is concerned with the nuclear reactions used in the production of the protons or neutrons, which are important in shielding calculations, accelerators and proton therapy.The analyzing of a complete energy range has been done starting from threshold energy for each reaction. The cross sections are reproduced in fine steps of incident proton or neutron energy in 0.01 MeV intervals with their corresponding errors. The adopted cross sections for all available experimental data have been calculated for all the considered reactions. A mathematical representative equation for all these reactions is formulated. These equations represent the variation of the cross section with energy, which could be used to predict the values of uncalculated cross sections.The cross sections of light elements like Tritium , Helium , Lithium isotopes ,Berlium , Boron isotopes , Carbon , Nitrogen , Oxigen , Alaminum , Silinum isotopes , , , and Phosfor in specific reactions were considered. The calculation of the adopted values for (p,n) and (n,p) reactions have been done and compared with international libraries which give good agreements.The (n,p) reactions cross sections values are derived from the data of (p,n) reactions and visa versa as a function of neutron or proton energy, respectively, by using the reciprocity theory and the principle of reverse reactions for the ground state.The stopping power according to Zeigler formulae was used in order to obtain the neutron yield for each reaction. Q - value, threshold energy, binding energy, compound nucleus cross sections, transmitted wavelength and the probability of occurrence of the reaction have been also calculated.The programmes of adopt.m, reverse.m, stop.m, yield.m, and cnpw.m have been built for the first time in the present work using Matlab 7.0 to calculate the results of the present work, as well as SRIM (2003) program.The evalutated (p,n) and (n,p) cross sections which are used for the first time, in spite of the numerous data available, a limited number of studies concerning the light elements with very small half life are still very important in nuclear technology. They prove that our calculated values are in good agreement with the published data.

تاثيرات الاشعاع على الخصائص البصرية لاغشية صبغة مثيلين ازرق المطعمة بpva == Radiation Effects on Optical Properties of Methylene Blue Dye Doped PVA Films

Author name: عمار نجم عبد
Supervisor name: محاسن فاضل هادي الكاظمي
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: اجري هذا البحث على مرحلتين, الاولى هي دراسة الخصائص البصرية والتركيبية لاغشية صبغة المثلين الازرق(Methylene blue) المطعمة ببوليمر بولي فينيل الكحول(PVA) وبنسب تطعيم مختلفة وهي (10, 15, 20, 30, 40) مل من محلول الصبغة وبتركيز(1*10 - 5) مول/لتر. كل النماذج حضرت بطريقة الصب والمرحلة الثانية هي تشعيع هذه الاغشية باشعة كاما وبيتا وبجرع مختلفة ودراسة تاثير انواع التشعيع على الخصائص البصرية والتركيبية لها.حيث وجد ان طيف الامتصاص يزداد بزيادة نسب التطعيم لكل من قمتي الصبغة والبوليمر مع وجود ازاحة باتجاه الاطوال الموجية الاطول (ازاحة حمراء), وتم دراسة فجوة الطاقة البصرية ووجد ان فجوة الطاقة الطاقة للبوليمر تتناقص مع زيادة نسب التطعيم مع ثبات فجوة الطاقة للصبغة وقد تم دراسة الثوابت البصرية الاخرى والتي تشمل (معامل الامتصاص, معامل الخمود, معامل الانكسار, وثابت العزل الكهربائي الحقيقي والخيالي).بعد تشعيع غشاء البوليمر النقي واغشية الصبغة المطعمة بالبوليمر ولمختلف نسب التطعيم باشعة كاما وجسيمات بيتا وجد ان هناك زيادة ملحوضة لطيف امتصاص البوليمر النقي بينما طيف الامتصاص هذا يتناقص لاغشية الصبغة المطعمة بالبوليمر وتعاني ازاحة باتجاه الاطوال الموجية الاصغر (ازاحة زرقاء) مع بقاء قمة امتصاص البوليمر على حالها, اما فجوة الطاقة فقد تناقصت بعد التشعيع للبوليمر وازدادت للصبغة لمختلف الاغشية وقد تم دراسة الثوابت البصرية الاخرى والتي تشمل (معامل الامتصاص, معامل الخمود, معامل الانكسار, وثابت العزل الكهربائي الحقيقي والخيالي).اما الفحوصات التركيبية فقد بين كل من حيود الاشعة السينية (XRD) وطيف (FTIR) عدم وجود تفاعل كيميائي بين الصبغة والبوليمر بعد الخلط وعدم تكسر الاواصر الاساسية لهما بعد التشعيع, واظهرت صور (FESEM) تعرض سطح البوليمر للتكسر وازدادت خشونتة بعد التشعيع بينما لم تتاثر كثيرا سطوح الاغشيه المطعمة من الصبغة والبوليمر بالتشعيع | The present work was carried out in two stages .The first stage was studying the optical and structural properties for methylene blue dye doped poly vinyl alcohol as a host polymer in different doping ratio of dye solution (10, 15, 20, 30, 50) ml with concentration of dye (1×10 - 5) mol/liter. All samples prepared by casting method. The second stage was irradiated all samples by Gamma ray and Beta particles in different doses and studying the optical and structural properties for them. The intensity of absorption spectrum increased with increasing doping ratio of dye solution for peaks of dye and polymer and gave red shift. The optical energy gap for PVA increased with increasing doping ratio of dye solution with remaind the energy gap for dye constant. The optical constants (Absorption coefficient, Extinction coefficient, Refractive index, Real and imaginary dielectric constants) was studied. After Gamma and Beta irradiation pure PVA film and MB/PVA films with different doping ratio of dye solution and found that the absorption spectrum increased for pure polymer, while the absorption spectrum for dye is decreased for MB/PVA films and gave blue shift with remained the absorption peak of polymer constant. The optical energy gap for PVA decreased whereas the energy gap for dye increased after irradiation. The optical constants (Absorption coefficient, Extinction coefficient, Refractive index, Real and imaginary dielectric constants) was studied. The XRD and FTIR showed no interaction between dye and polymer after doping and there are no broken fundamental bands after irradiation. FESEM photographs illustrated that the surface of all films became more roughness after irradiation.

معدل التقشر ومتانة الانحناء لمتراكبات ثنائي هيدروكسي بنزين (هيدروكوينون) المدعمة بالالياف == Ablative Rate and Bending Strength of Fibers Reinforced Dihydroxy - Benzene(Hydroquinone) Composites

Author name: علي زامل منشد
Supervisor name: بهجت بهلول كاظم
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: تم دراسة معدل التقشر ، التوصيلية الحرارية، متانة الانحناء،و صلادة فيكرز لمتراكبات الفينول نوع ثنائي هيدروكسي بنزين مدعمة بالياف مختلفة (الياف زجاجية نوع E على شكل حصيرة والياف كاربونية مستمرة)،وبنسب حجمية(0%،20%،40%،60%،70%) بدلالة الخواص الحرارية والميكانيكية لتغيرات الكسر الحجمي للالياف.المتراكبات التي خضعت للاختبار كانت مجموعتين هي EGFC، CFC، بالاضافة لمادة الفينول نوع هيدروكوينون(ثنائي هيدروكسي بنزين)HQR. تم استخدام تقنية الكبس الحار لتحضير المتراكبات باستخدام القوالب المارقة تحت الظروف القياسية.استعملت تقنية قرص لي لقياس التوصيلية الحرارية حسب المواصفة البريطانية القياسية لشركة جورج وكرفيه المحدودة. استخدمت تقنية الشعلة الا وكسي - استيلينية لتحديد معدل التقشر وكذلك معامل العزل الحراري حسب المواصفة القياسية ASTM - E285 - 80. وتم استخدام ماكنة Instron لحساب متانة الانحناء حسب المواصفة القياسية ASTM D - 790.واستعمل جهاز الصلادة المجهرية لفيكرز لحساب الصلادة وحسب المواصف القياسية ASTM E92 - 82 . نفذت المحاكاة لحساب معدل التقشر بثلاث ابعاد باستخدام طريقة الفروقات المحددة. اظهرت النتائج بان التوصيلية الحرارية تزداد تصاعديا بتعاقب النسبة المئوية الحجمية للالياف. من خلال النتائج النظرية لاختبار التوصيلية الحرارية التي حسبت من خلال مود يل micro structures وعند مقارنتها مع النتائج العملية تبين القيم النظرية ان هناك تقارب مع النتائج العملية. يسلك معدل التقشر سلوك معاكس حيث يكون اوطا قيمة عند اعلى نسبة مئوية حجمية للالياف ، وتبين العلاقة بين التوصيلية الحرارية ومعدل التقشر اليتين متزاملتين، الاولى مع بداية الاختبار والمميزة بتوزيع مثالي للالياف الذي يدل على الية التشتيت الحراري بالالياف بسبب تكون شبكة من مسارات التوصيلية الحرارية، والثانية التي ترافق اختبار التقشر والمميزة بمظهر تكون الشروخ القصية التي تدل على الية تكون الفحم المبكرة.كما تبين بان متانةالانحناء تزداد تزايديا خطيا بتعاقب النسبة المئوية الحجمية للالياف ، وتعرض العلاقة بين الكسر الحجمي ومتانة الانحناء بروز الية pull - out ، وقد تبين وجود نوعين من الربط بين المادة الاساس والمضافات هما : الربط الضعيف والربط القوي، كما تبين بان الصلادة تزداد تزايديا خطيا بتعاقب النسبة المئوية الحجمية للالياف.جاءت قيم النتائج للمحاكاة لمعدل التقشر اعلى من قيم النتائج العملية، وقد فسر ذلك على ان درجة حرارة لهب شعلة الاختبار (الاوكسي _ استيلينية) العملية لم تصل الى درجة الحرارة الشعلة المستخدمة نظريا، بالاضافة الى تاثير السطح البيني للمتراكبات الذي كان ذو متانة وقوة ارتباط عالية، وقيم الكثافة للمتراكبات تدل على ذلك. وظفت الصور الفوتوغرافية بالاقتران مع الصور المجهرية والكثافة للمساعدة في تفسير النتائج.يتضح من النتائج العملية بان المتراكبات المستخدمة في هذا البحث ذات الكسور الحجمية العالية يمكن استخدامها في التطبيقات التي تحتاج الى تشتت حراري كبير، مقاومة عالية للتهرئة، متانةانحناء وصلادة عالية. | In this work, thermal conductivity, K, ablation rate, Ar, bending strength, σf, and Vickers hardness VHs for phenolic (phenol - formaldehyde) resin, PFR type hydroquinone HQR reinforced with different fibers (,E - glass, as mat , and carbon fibers, as continuous) have been studied, in terms of thermal and mechanical properties, which are subject to change in different fibers volume fraction.The composites candidates for this work were two groups; E - glass fibers composites (EGFC), carbon fibers composites (CFC), besides, pure matrix phenolic resin PFR type HQR. Hot - press technique was used to prepare the composites as well as hydroquinone specimens using flash molds at standard conditions.Lee’s disk technique was used to measure thermal conductivity. Oxy - acetylene flame technique was used to determine ablation rate as well as thermal insulator index according to ASTM - E285 - 80. Instron machine was used to measure bending strength according to ASTM - D790.Microhardness Vickers machine was used to determine the hardness according to ASTM - E92 - 82. Simulation programs of heat transfer in three dimensions of ablative test for hydroquinone and hydroquinone composites specimens were carried out using finite difference method.Thermal conductivity results show that K values increase progressively by succession of volume fraction of fibers. Ablation rate behaves inversely, where it drops at high volume fraction of fibers. The thermal conductivity - ablation rate relationship displays two mechanisms. First, associated with the starting of test is recognized by ideal distribution of additives, which leads to thermal dispersion due to the formation of segregated network of thermal conducting paths. Second mechanism is associated with ablation test recognized by shearing cracks appearance, which leads to earlier char production mechanism.Bending strength results show, that σf increases progressively by succession of volume fraction of fibers. The bending strength - volume fraction relationship displays two mechanisms according to the kind of fibers. Where, it can be observed, pullout mechanism with respect to fibers composites. It is shown that there are two kinds of bonding between the matrix and the fibers; weak - bond and strong - bond. The composites were broken through tension down the specimen and compression upper the specimen and shearing fracture mechanism. Hardness Vickers results show that HVs increases progressively by succession of volume fraction of fibers.Ablation simulation results values coming higher than experimental results value. This could be explained as the interface affect of composites, which had high strength and strong bond force, and density values evidence to that.Optical micrographs, coupled with auxiliary microscopy, and densities were employed to aid interpretation of results. The composites under the study can be used in applications, which need high thermal dispersion, high ablation resistance, and high bending strength

تمييز الاهداف عن الخلفية الارضية ذات التماثل الحراري في الحزمتين من الاطوال الموجية [3.5 - 4.1 - µm and 11 - 12 - µm ] == Discrimination of targets from background of similar temperature, using two - channel data in the 3.5 - 4.1 - µm and 11 - 12 - µm regions

Author name: عدي جواد كاظم
Supervisor name: بسعاد هادي حمزة
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: للتمييز بين هدفين او هدف عن الخلفية الارضية استخدمت طريقتان,طريقة حد العتبة وطريقة التصنيف طريقة الحد الاقصى (MLH). تم حساب ( Wλ ) الانبعاثية الطيفية للهدف والخلفية في درجات حرارة مختلفة(T) في اثنين من الحزم الطيفية وبطول موجي μm (3.5 - 4.1) μm(11.0 - 12.0) . وبرسم العلاقة بين دالة التمييز (DF)كدالة لانبعاثية الهدف (target emissivity (εA)) للحزمة وكدالة لدرجات حرارة الهدف. من هذا العمل, التمييز بين الهدف والخلفية الارضية تحت الظروف الجوية المحددة المستخدمة في الموديل الرياضي للحسابات يبين جدوى امكانية كشف الاهداف المختلفة عن الخلفية الارضية بفارق حراري صغير نسبيا.ان تمييز الاهداف بطريقة الكشف الحراري باللاشعة تحت الحمراء يتم من خلال استخدام طريقة حد العتبة والتي تعالج مشكلة الكشف عن الاهداف التي تكون قريبة لدرجة حرارة المحيط ,وذلك بنمذجة الخلفية وباستخدام الموديل الرياضي كقاعدة لتطوير وفهم العمليات الفيزيائية واختلافاتها الامر الذي سيؤدي الى بناء خوارزمية لتعزيز الفرق بين الهدف والخلفية.وبحساب النسبة بين الاشعاع المستلم من الهدف ومن الخلفية، فان افضل تمييز للهدف يكون في حزمتين من الطول الموجي مما هو عليه الحال في حالة استخدام الحزمة الواحدة وخاصة عندما تكون درجة الحرارة للخلفية الارضية والهدف متماثلة..باستخدام احدى طرق التصنيف وهي طريقة الحد الاقصى لتميــــيز الهدف عن الخلفية الارضية في درجات حرارة مختلفة وحزم اطوال موجية مختلفة ومن خلال ملاحظة اقصى كثافة احتمالية . نستنتج ان طريقة الحد الاقصى هي افضل طريقة لتحسين التمييز في نطاق واسع من حزم الطول الموجي في درجات حرارة مختلفة بينما تكون طريقة حد العتبة اسلوب افضل في تحسين التمييز في درجات حرارة مختلفة ولكن في نطاق ضيق من حزم الطول الموجي | To discriminate between two IR targets or target from background two methods are used, the threshold method and the classification method Maximum likelihood Method. we calculate the spectral radiant emittance Wλ for target and background at different temperature (T) in two bands (3.5 - 4.1) μm (11.0 - 12.0) μm. The discrimination function (DF) is plotted as a function of the target emissivity (εA) for bandpass and as a function to target temperature TA in two bandpasses. From this work the discrimination of target from background under selected atmospheric conditions used in the modeling calculation demonstrates the feasibility of detection for target to background in minor temperature differences. Targets discrimination for thermal IR detection is accomplished by using threshold method, which has addressed the problem of detecting targets which are close to ambient temperature. This was done by modeling the background and by using the model as a base for developing an understanding of physical processes and their variations which will lead to the construction of an algorithm to enhance target to background contrast. The present study showed that by ratioing radiance received from target and background better target discrimination is possible using two bands than case from using one bandpass especially when target and background are of similar temperature. Using the Maximum Likelihood Method (MLH) to discriminate target from background in different temperature and different bands will demonstrate the maximum probability density function. Concluding that the Maximum Likelihood Method is to be the best method for discrimination in wide range of wavelength at different temperatures while the threshold method is to be the best method for discrimination at different temperatures but in range of narrow wavelength of bandpasses.

محاكات الهوائي الكسوري باستخدام منحني كوج ومينكوسكي == Simulation of Fractal Antenna Using Koch and Minkowiski Curves

Author name: خضير عباس قنبر
Supervisor name: كاظم جواد كاظم الشجيري
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: الهوائي عنصر رئيسي في الاتصالات اللاسلكية فهو الادات التي تستقبل وترسل الموجات الكهرومغناطيسية في الفضاء الحر. ان التوسع الهائل في الاتصالات اللاسلكية بحاجة الى هوائيات متعددة الحزم وصغيرة الحجم وبمقطع جانبي منخفض ومن اجل تطوير اداء الهوائيات استخدمت الهندسة الكسورية لتحسين خواصها . والتي تجعل الهوائي متعدد الوظائف . في هذة الرسالة استخدمت تقنية جديدة لتحسين اداء الهوائيات الكسورية ثنائية القطب باستخدام عاكس كسوري متحرك. استخدمت الحقيبة البرمجية 4NEC2 لمحاكاة اول ثلاث تكرارت لهوائيات منحني Koch ومنحني Minkowski قبل وبعد اضافة العاكس الكسوري . ومن اجل تصميم الهوئيات بدقة عالية استخدم البرنامج Adobe illustrator CS4 لرسم جميع الهوائيات المقترحة . ومن نتائج المحاكاة لوحظ ولجميع الهوائيات ان العاكس الكسوري المتحرك حسن من قيمة VSWR (نسبة فولتية الموجة الواقفة) والكسب والتوجية وكذلك زاد الترددات الرنينية المفيدة للتكرارات الثلاثة لمنحني Koch . حيث اضاف تردد رنيني مفيد للتكرار الاول وترددين رنينيين مفيدين للتكرار الثاني وتردد رنيني للتكرار الثالث كذلك اضاف ترددين رنينيين مفيدين للتكرار الثالث لمنحني Minkowski . | Antenna is the main element in wireless communication. It is the instrument which receives and transmits the electromagnetic wave in a free space. The great expand in wireless communications need antennas with multiband, small size and low profile. In order to develop the performance of antennas, fractal geometry is used to optimize the property of the antenna. It makes antenna multi - functional. In this thesis a novel technique is used to optimize the performance of fractal dipole antennas by using a movable fractal reflector. 4NEC2 software package is used to simulate the first three iterations for (Koch curve and Minkowiski curve) antennas before and after adding the fractal reflector. In order to design fractal antennas with high accuracy, Adobe illustrator CS4 software program is used to draw all proposed antennas. From simulation results and for all proposed antennas are observed the movable fractal reflector optimize the value of voltage standing wave ratio VSWR, gain and directivity. Also, it increases the benefit resonant operating frequencies for all three iterations of the Koch curve. It adds one benefit resonant frequency to the first iteration and two benefit resonant frequencies to the second iteration and one benefit resonant frequency to the third iteration. Also, it adds two benefit resonant frequencies to the third iteration of Minkowiski curve

غشاء ZnO - SnO2 وخصائصه التحسسية == ZnO - SnO2) Thin Film and Their Sensing properties

Author name: خالد وليد صابر
Supervisor name: علي جاسم محمد الجابري
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: ZnO,SnO2,Zno - Sno2 composite( ل في هذا البحث تم دراسة الخصائص التركيبية والتحسسية على توالي والمحضرة على قواعد قواعد زجاجية بظروف ترسيب مختلفة من نسب المواد (100% : 0%,0% : 100%, 50% : 50%, 30% : 70% , 10% : 90% ) وبدرجة حرارة القاعدة ( 400 & 450 ) سيليزية وبزاوية رش ( 0& 45 ) درجة. بينت فحوصات تقنية حيود الاشعة السينية (XRD) لتشخيص طبيعة تبلور الاغشية المحضرة, ان جميع الاغشية المحضرة ذات تركيب متعدد التبلور من نوع سداسي hexagonal)).مع اتجاهيه (002 ) للعينات المحضرة ل) ( ZnO,ZnO : SnO2 compositeما عدا (SnO2 ) فهو ذو تركيب متعدد التبلور من النوع الرباعي ( tetragonal ) مع اتجاهية ( 110 ) ، كما اظهرت النتائج الحصول على التركيب نانوي بمعدل حجم حبيبي ( من 2.4 الى 46 نانو) وتجانس منتظم بواسطة اضافة اوكسيد القصدير الى اوكسيد الزنك ، وهذا اعطى تبلور عالي مع ظروف الترسيب المختلفة. بواسطة تحليل السطح بواسطة المجهر الالكتروني الماسح ( SEM ) ومجهر القوة الذرية ( AFM ) تم التعرف على تاثير ظروف الترسيب المختلفة على خصائص تشكل العينات ، اظهرت صور (SEM ) تراكيب مختلفة مثل الابر والالياف والقضبان السداسية النانوية و(rich particle ) كما اظهرت النتائج التجانس والتوزيع المنتظم والنمو العالي ، كذلك زيادة معدل الحجم الحبيبي وزيادة الخشونة وهذا يقود الى الحصول على مساحة سطحية عالية وتاثير كبير على التحسسية .كل القياسات التحسسية اظهرت تحسسية عالية عند درجة حرارة القاعدة ( 450 ) سيليزية بزاوية رش (45 ) درجة ونسبة (SnO2 50% : % 50 ZnO) وعند زيادة نسبة ( ZnO ) لتصبح (100 % ) فان التحسسية تقل. ان العامل المؤثر على التحسسية هو نسبة المواد الداخلة في تركيب الاغشية الرقيقة كافضل نسبة حجمية 50)٪ 50 : ٪( وعند زيادة نسبة لتصبح 100٪ اوكسيد الزنك فان التحسسية تقل . اوكسيد الزنك لديه تحسسية عالية، ولكن عندما يخلط مع SnO2، وهذا يؤدي الى زيادة تحسسية وهذا واضح من خلال النتائج المستحصلة. | In this work, structural and sensing properties have been studied for ZnO, SnO2 compound and ZnO - SnO2 composite thin films. They were prepared by spray pyrolysis technique deposition at substrate glass, were used different deposition conditions, volume ratios(100% : 0%, 0% : 100%,50% : 50%, 70% : 30%, 90% : 10%,), Substrate temperature ( 400)&(450) oC , incident angle spray of spray pyrolysis (0) & (45) .. The X - ray diffraction technique has showed that all prepared films are polycrystalline structure with hexagonal type that preferred orientation of plan (002) direction for all thin film prepared for ( ZnO compound, ZnO - SnO2 composite thin films) except SnO2 thin films are polycrystalline structure with tetragonal type with preferred orientation of plan (110) , the results obtained by X - ray diffraction showed that we get the installation of nano structure with average grain size between ( 2.4 to 46 nm) and uniform Homogeneity by added tin oxide to zinc oxide, the results show high crystalline with deferent conditions deposition. Surface analysis by SEM and AFM have been used to understand the effect of the different conditions deposition on morphology properties of the samples. The SEM micrographs show needle - like, fiber - like , hexagonal nano rods, rich particles ( high growth) and homogeneity , uniform distribution, high growth. The results showed an increase of the average grain size with increasing roughness and this leads to obtain a high surface area and large effect on sensitivity. Overall measurements sensing showed that the highest of sensitivity at substrate temperature (450 oC) ,incident angle spray pyrolysis (45) with ratio ( 50% : 50%) . The influencing factor on sensitivity is the ratio of materials involved in the structure of thin - film as the best volume ratio its (50% : 50%) and when you increase the ratio to become 100%ZnO the sensitivity decreases. ZnO has high sensitivity, but when mixed with SnO2, this leads to increase sensitivity and this is clear from the results that were obtained.

التدريع الفعال لغرف الاشعة السينية التشخيصية == Effective Shielding For X - ray Diagnostic Rooms

Author name: حيدر صادق جعفر
Supervisor name: عبد الله احمد رشيد
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: وفقا لمصطلحات الاشعة السينية التشخيصية الطبية فان الاشعاع يتكون من الاشعاع الاساسي والاشعاع الثانوي .ان عملية وضع حواجز كالجدران التي تعترض الاشعاع الاساسي تدعى بالتدريع الاساسي في حين ان وضع حواجز للحماية من الاشعاع الثانوي تدعى بالتدريع الثانوي. في هذا العمل نتفحص حالة التدريع للحواجز الثانوية لغرفة التصوير الشعاعي للثدي والحواجز الاساسية لغرفة الاشعة السينية للصدر الرقمية في مستشفى الحسين التعليمي في مدينة كربلاء. باعتبار تصاميم غرف التصوير الشعاعي للثدي والاشعة السينية للصدر الرقمية ولمحة عن اجهزة التصوير الشعاعي المستخدمة فانه تم احتساب حمل العمل الكلي السريري لكل اسبوع وحمل العمل الكلي لكل مريض كما تم تحديد توزيعهما وفقا للفولتيات الاكثر استعمالا من خلال اختيار عشوائي للقيم التقنية السريرية الفعلية للــ mAs)) وقيم ذروة الكيلو فولت المناظرة لـ (2191) حالة تشخيص على مدى ثمانية اشهر لغرفة التصوير الشعاعي للثدي و(1402) حالة تشخيص على مدى اربعة اشهر لغرفة الاشعة السينية للصدر الرقمية. كمصدر لتدريع اشعاع الاشعة السينية التشخيصية فان تقرير المجلس الوطني للحماية من الاشعاعات والمقاييس رقم 147NCRP report No.147 )) وبرنامج الكمبيوتر (XRAYBARR) قد تم استخدامهما لحساب اسماك الحواجز الثانوية لغرفة التصوير الشعاعي للثدي والحواجز الاساسية لغرفة الاشعة السينية للصدر الرقمية . لغرفة التصوير الشعاعي للثدي فقد وجد ان حمل العمل الكلي في الاسبوع وحمل العمل الكلي لكل مريض كانتا تقريبا تساوي ما يحدده تقرير ان سي ار بي رقم 147 ( NCRP report No.147 ) لنفس عدد المرضى. الاسماك المطلوبة من الجبس والخشب كانا حوالي 4 ملم , 20 ملم على التوالي في حين ان الاسماك الفعلية الموجودة اعلى من هذه القيم. لغرفة الاشعة السينية للصدر الرقمية فقد وجد ان حمل العمل الكلي في الاسبوع كان بحدود 4.2 اضعاف ما يوصي به تقرير ان سي ار بي رقم 147 (NCRP report No.147 ) في حين ان حمل العمل الكلي لكل مريض كان بحدود خمسة اضعاف ذلك الذي يحدده تقرير ان سي ار بي رقم 147 ( NCRP report No.147 ) لنفس عدد المرضى لكل 36 ساعة عمل فعلية في الاسبوع لحالة ناشطة. السمك المطلوب من الرصاص كحاجز اساسي كان 2.7 ملم او 184 ملم من الخرسانة . في الواقع لم يكن هناك رصاص كحاجز اساسي بدلا عن ذلك فان مواد اخرى مثل الطابوق والخرسانة وجدت باسماك عالية كفاية لاستخدامها كحاجز تدريع اساسي.عظام الحيوانات استخدمت كاساس لاعداد اربعة نماذج من تركيبات مختلفة. هذه النماذج فحصت ضد اشعاع الاشعة السينية الاساسي عند جهود انبوب kvp 50 kvp 60 kvp 70 kvp 80 وkvp 90 باستخدام جهاز قياس معدل الجرعة minitracey. الانتقال النسبي , معاملات الملائمة باستخدام نموذج ارتشر Archer model , طبقة النصف ذات التوهين العالي ونسب التدريع لنماذج الانواع الاربعة حسبت وقورنت مع بعضها البعض. الكثافات وطبقات النصف ذات التوهين العالي عند kvp 50 وkvp 70 لنماذج الانواع الاربعة قورنت مع الكثافات وطبقات النصف ذات التوهين العالي لمواد التدريع الشائعة والمبتكرة. لقد وجد ان طبقات النصف ذات التوهين العالي لنماذج الانواع الاربعة افضل من طبقات النصف ذات التوهين العالي المواد الشائعة والمبتكرة. يستنتج من ذلك ان هذا النوع من المواد ستكون مفضلة كمادة تدريع ضد اشعاع الاشعة السينية الثانوية.

قياس تراكيز غاز الرادون ووليداته وتقييم التعرض في ابنية كلية العلوم في الجامعة المستنصرية == Measurement of Radon and Daughters Concentrations and Exposure Assessment in the Buildings of the Science College at AL - Mustansiriyah University

Author name: حيدر عيد فاضل
Supervisor name: ايمان طارق العلوي
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: The concentrations of Radon gas and their progeny have been measured in the building of Al - Mustansiriyah University College of Science. Deanship building, four flowers, includes dean office and administrative staff in addition to the department of mathematics, department of biology, lecture rooms and laboratories affiliated in addition to the basement of the Deanship building, building of department of chemistry libraries, building of department of physics libraries, and building of meteorology or atmospheric Science (in which the detectors have been suspended, but most of them had been lost because of the maintenance work, which cooperated with the preparation of this study).The nuclear track detector of solid state CR - 39 technique has been used to study the trace effect. 356 detectors have been suspended and distributed (two detectors) in each location under study. Detectors with 1cm x1cm area have been suspended with two heights; the first height represents the sit down mode and the second represents the standing mode, for a period of 90 days except those for the department of chemical libraries because of an official holiday in the Al - Mustansiriyah University.The dosimeters have been design to be adequate for the research environment. The samples are collecting after exposing time for the period mentioned above, then applying the chemical etching and Statistics numerical process the density of the nuclear has been calculated in order to calculate the concentrations of Radon and their daughters. The calibration process has been made in this work by exposing other detectors (similar of that used for the detecting) to Radium - 226 source with known activity radiation.It was found that all concentrations are within the world wide limits. It has been found the Radon concentrations in the basement of Deanship building are relatively higher than in other location have been observed. These concentrations are decreasing gradually with height to reach the lowest value at the fourth floor. It strengthens that the Radon gas is heavier than air. The yearly effective dose of the exposure to Radon has been calculated. The Radon concentration is within the world wide permissible limits.

تصنيع حراريات من البوكسايت العراقي == Refractories Manufacturing from Iraqi Bauxite

Author name: ایناس محي هادي
Supervisor name: محاسن فاضل هادي الكاظمي
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: Arabic
University location: Baghdad
First pages:
Abstract: Iraqi raw Bauxite was fired at (1400) ̊C in order to produce calcined Bauxite. Chemical analysis and X - Ray Diffraction were carried out on the Iraqi Bauxite and calcined Bauxite to assess their ability for refractories production.The refractory mixture prepared from calcined Bauxite and raw Kaolin as a binder. The Kaolin was added in ratios of (10%, 20% and 30%). From the results of physical properties it was found that the mixture which has (10%) kaolin is the most suitable one for refractory production. Micro and Nano Zirconia and raw Zircon were added in ratios of (5%,10%,15% and 20%) in order to improve Iraqi Bauxite characteristics to be suitable for refractories production which are used in glass and metals industries.The samples were formed by semi - dry pressing with different load with the addition of potassium silicate in ratio of (10%) as a binder. The samples were formed with dimensions for (height × diameter) as : (50×25)mm2, (50×50)mm2, (1×50)mm2, (1×25)mm2 and (50×10)mm2. The samples were dried at room temperature for (24)hr, after that dried by electrical dryer at (110) ̊C for (8)hr. The refractories of (Bauxite - Zirconia) fired at (1400) ̊C and refractories of (Bauxite - Zircon) at (1500)̊C by a firing program with a soaking time for (2)hr.The test which were carried out are : (X - Ray Diffraction and SEM), Physical Testing : (Linear Shrinkage, Apparent Porosity, Water Absorption Ratio and Apparent Density), Mechanical Testing : (Bending Strength, Compressive Strength, Diametrical Strength, Hardness and Surface Roughness), Thermal Testing : (Thermal Conductivity, Specific Heat Capacity, Thermal Expansion Coefficient, Thermal Shock Resistance and Differential Thermal Analysis (DTA). And last test was Chemical Resistance to molten glass.According to (XRD) and (SEM) results the refractories consist mullite phase and glass phase. Refractories of (Bauxite - Nano Zirconia) have the lowest linear shrinkage and highest apparent density then the refractories (Bauxite - Micro Zirconia) and (Bauxite - Zircon).The adding of micro or Nano Zirconia or raw Zircon led to decrease the linear shrinkage and increase apparent density because of the increasing of pure ceramic materials in account of raw ceramic materials. The increasing of apparent density associated with decreasing of apparent porosity and water absorption ratio.The improving of the mechanical properties by adding Zirconia and raw Zircon causes by the high toughness of the additive ceramic materials which is also prove the crack pining mechanism with ceramic particles practically.The increasing of apparent density in susceptible the thermal properties therefore the thermal conductivity, specific heat capacity and thermal expansion coefficient were decreased while thermal shock resistance was increased, according to properties of the additive ceramic materials. The results of the differential thermal analysis shown that the refractories of (Bauxite - Zirconia) have a high thermal stability in the test temperaturerange (25 - 1500)̊C, except some process that return to raw Kaolin, endothermic process were moisture loses and crystalline water loses and exothermic process at (900 - 1000)̊C as mullite phase formed from the reaction between (SiO2) and (Al2O3).The increasing of chemical resistance causes from adding of Zirconia and raw Zircon to the prepared refractories, which led to reduction of wetting ability and the amount of molten glass which adhesive with refractories, on the other hand forbade the chemical reaction between the molten glass and the refractories.

دراسة فقدان الطاقة لحزمة ايون الهيدروجين في الحمض النووي والماء == Studying Energy Loss of Hydrogen Ions Beam in DNA and H2O

Author name: اوفى زهير خضير
Supervisor name: خالد عبد الوهاب احمد | رياض خليل احمد
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: The energy delivered by a swift proton beam in materials of interest to hadron therapy (DNA and liquid water) is investigated in the present work. An explicit condensed - state description of the target excitation spectrum based on the dielectric formalism is used to calculate the energy - loss rate of the beam in the irradiated materials.The present work focus on : (i) Calculations of the energy loss, the probability P(E,T) of electronic excitation produced by proton, the average energy <E> transferred to the targets by electronic excitation, Partial Stopping Power, Effective Charge (PSPEC) using the dielectric function (PPA) to describe the excitation spectrum of DNA and H2O. Results show that the protons with energy between 0.05 MeV to 2.5 MeV are very efficient in producing secondary electrons in DNA and H2O, which are able to produce strand breaks and could be very effective for the biological damage of malignant cells.The ionization potential (the so - called I - value) is the most important material quantity in the calculation of the electronic stopping power of energetic ions (>1 MeV u−1) has been evaluated through Bethe’s formula and represents its main source of uncertainty at high energies, I DNA found to be 80.01 and I H2O .(ii) Calculation of shell correction of swift proton has been done by adopting (PPA) dielectric function of DNA and Liquid water targets. As well as calculations of shell correction using HO - GOS, KT - IM and FEG - ELF models, and compared the results come from three models.I(iii) Barkas effect, ( L1) and Bloch correction ( L2) for penetrating proton in DNA and Liquid water have been calculated using (KT, HO and FEG) moels, where the Bethe - Bloch parameters like, Barkas effect, Z 1L 1, Bloch correction, and Shell correction, ⁄ are unknown for DNA and liquid water.Results for protons impacting in the most representative biological targets (such as water or DNA components) show a very good comparison with experimental data. Because of its simplicity and great predictive effectiveness, the method can be immediately extended to any combination of biological target and charged particle of interest in ion beam cancer therapy.The equations of theoretical formulas for interesting physical quantities are programmed in a programs AuFa - H - DNA.for and AuFa - H - H2O.for , [see the flow charts in Appendix A] which contains some subroutines have been written in Fortran - 90 for the numerical calculations.

دراسة النشاط الاشعاعي لعضوين بشريين الثدي والرحم باستخدام كواشف الاثر CR - 39 واللكسان == Studying The Radioactivity In Two Human Organs Breast And Uterus Using CR - 39 And Lexan Track Detectors

Author name: انعام ياسين حسن
Supervisor name: ندى فرحان كاظم
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: استخدمت تقنية التنشيط بالتشعيع النيوتروني لتحديد تراكيز اليورنيوم الموجودة في عينات الانسجة البشرية التي تم دراستها في هذا البحث (رحم , ثدي) وذلك عن طريق تشعيع النماذج بعد تحضيرها وكبسها الى اقراص صغيره بقطر (2cm) وسمك (1mm) ووضعها بين قطعتين من كواشف الاثر للحاله الصلبه المستخدمة في هذا البحث وهي كاشفي (CR - 39) واللكسان.تم تشعيع النماذج المحضره (كاشف - عينه - كاشف) بالنيوترونات المنبعثة من المصدر النيوتروني النظائري (امريشيوم 241 - بريليوم) ذو الفعالية الاشعاعية (38mCi) لاجل شطر اليورانيوم الموجود في العينات وتسجيل اثار شظايا الانشطار على الكاشف. تم في هذا البحث ايضا اختبار ازمان مختلفة للقشط الكيميائي لاجل الوصول الى زمن القشط المناسب لاضهار اثار شظايا الانشطار لكلا الكاشفين المستخدمين مره باستخدام الحمام المائي واخرى باستخدام الميكروويف (لاول مره في هذا البحث). وقد تبين ان افضل زمن قشط لكاشف CR - 39)) (30min)عند استخدام الحمام المائي و(8min) عند استخدام المايكروويف ولكاشف الليكسان (60 min ) عند استخدم الحمام المائي و(5 min ) عند استخدام الميكروويف.وقد اتضح ان عدد الاثار التي ظهرت باستخدام الميكروويف كانت اقل بقليل من التي ظهرت باستخدم الحمام المائي لكنها اكثر وضوحا. بينت هذه الدراسة ان متوسط تراكيز اليورانيوم في نسيج الرحم المحسوبة باستخدام كاشف CR - 39 المقشوط كميائيا باستخدام الحمام المائي هي (0.062ppm) وللكشف المقشوط باستخدام الميكروويف هي (0.047ppm). في حين كانت التراكيز في نفس النسيج المحسوبة باستخدام كاشف الليكسان المقشوط باستخدام الحمام المائي هو( (0.054ppmوللمقشوط باستخدام الميكروويف هي .(0.047 ppm)كما بينت الدراسة ايضا ان متوسط تراكيز اليورانيوم في نسيج الثدي عند استخدام كاشف CR - 39 المقشوط كميائيا باستخدام الحمام المائي 0.060ppm))وللمقشوط باستخدام المايكروويف هي(0.039 ppm). في حين كانت التراكيز من نفس النسيج المحسوبه باستخدام كاشف الليكسان المقشوط باستخدام الحمام المائي (0.034ppm) وللكواشف المقشوطه باستخدام الميكروويف .(0.040ppm) | Neutron activation technique irradiation is used to determine uranium concentration in human tissues samples (uterus, breast) that have been studied in this research through irradiation samples with neutron source (241Am - Be) after prepared into small disk diameter (2cm) with thickness (1mm) and inserted between two pieces of solid state nuclear track detector (CR - 39,Lexan) used in this research. The samples have been irradiation (detector - sample - detector) with neutron emitted from isotopic neutron source (241Am - Be) with activity (38mCi) to fission uranium in the samples and registrar fission fragment tracks on the detector. CR - 39 and Lexan track detectors etched using (NaOH) with normality (6.25N) at different etching time using water bath and microwave. In this research we found the optimum etching time for CR - 39 is (30 min) when using water bath and (8 min) when using microwave. While for lexan detector is (60 min) when using water bath and (5 min) when using micro wave, and also the number of tracks which appear by using microwave is slightly less and clear than that appear by using water bath. This study shows that the average uranium concentration in uterus tissues when CR - 39 detector used in water bath is (0.062ppm) and detector etching by using microwave is (0.047ppm),While the average concentrations using lexan detector when used water bath is (0.054ppm) and etching by using microwave is (0.047 ppm). This study is shows also the average uranium concentrations in breast tissues when CR - 39 detector used in water bath etching is (0.060ppm) and by microwave etching (0.039ppm) and the concentrations using lexan detector when used water bath is (0.043ppm) and etching by using microwave is (0.040 ppm).

تصميم متحسسات الياف بصرية للكياسات البيئية == Design of Optical Fiber Sensors for Environmental Measurements

Author name: الهام كاظم اونيس
Supervisor name: محمد صالح مهدي | رياض خليل احمد
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: This study includes two main parts to design and study uniform and apodized fiber Bragg grating. The first part include simulation method by using optigrating 4.2 software in order to get the transmission and reflection spectrum for the FBG, also to give high accurate for analysis the characteristics of the FBG. The work of the software based on coupled mode theory which used the T - Matrix to solve its equations.The simulation study includes designed a uniform and Apodized fiber Bragg grating and studying the effect of increasing grating length on the reflectivity for them. The results show that, increasing grating length for uniform FBG for (L= 05 - - - 40mm) causes to increase the reflectivity to (99.99%) at (L=28mm), but increase in the reflectivity of side lobes which can reduce it by using apodization method in order to reduce the refractive index change towards the ends of the grating. After that, if the length is increased further, it is observed that the maximum reflectivity maintains the same value of (99.99%). The results for the effect of increasing grating length on the bandwidth show that, the value of the bandwidth decreased until achieved (0.01062nm) at grating length 28mm, then stay at this value for longer length.The simulation results for the Apodized FBG show the same behavior as the results of the uniform FBG but without side lobes. The effect of the increasing index modulation on the reflection spectrum was studied for the uniform FBG, from the results we observed that increasing in index modulation causes increasing in the reflectivity, where at the weak grating (1*10 - 4), the reflectivity was low and at the strong grating (4*10 - 4), the reflectivity was high.IIIIn addition, the study includes designing a sensor for a temperature and strain for uniform and apodized FBG. A uniform single temperature sensor is designed at grating length 10mm, the simulation result shows that, the center wavelength shifts with increasing temperature for (25 - 80˚C). The calculated temperature sensitivity for this sensor is (13.8 pm/˚C), Depending on the results we calculate the estimated temperature accuracy which is (± 0.33˚C).Again we design a sensor for the temperature but for array sensor, the results show that, the array sensor will not reflect Bragg wavelength at the same time when the temperature increasing because we take different value of grating period for each fiber in the array sensor. The temperature sensitivity for this sensor is (mean 13.76pm/˚C), and the estimated temperature accuracy is (mean ± 0.73˚C). From the comparison between the single and array sensors, we find that, the single FBG sensor system is more accurate compare to the array sensor, but in term of advantage FBG sensor array system have more advantage compare to the single FBG sensor.The simulation study for apodized FBG temperature sensor gives the same behavior as the uniform single FBG sensor but without side lobes. The results show that, there is no effect of increasing temperature on the bandwidth for the sensor. The strain sensor is designed for the uniform FBG at length 10mm; the results show that, increasing Bragg wavelength for applied strain for (200 - 2600με).The second part for the study includes designing and studying a temperature sensor by using experimental method. The experimental results show that, the reflection and transmission spectrum is at (1553.764nm) and increasing with increasing temperature from 25˚C to 80˚C. The measured temperature sensitivity for the sensor is (13.7 pm/˚C), while the theoretical is (14.2 pm/˚C). The estimated temperature accuracy for the sensor is calculated and is (± 0.32˚C).

تاثير اضافة بولي اثيلين اوكسايد على خصائص بعض البوليمرات في التطبيقات الطبية == Influence of Adding Polyethylene Oxide on Some Polymer Properties for Medical Applications

Author name: احمد شاكر حسين كحيط
Supervisor name: رحيم كعيد كاظم حسين المرشدي
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: تضمنت الاطروحة دراسة الخصائص الفيزيائية لبوليمر بولي اثيلين اوكسايد (PEO) باستخدام المذيب ثنائي ميثيل الفورماميد (DMF) باستخدام تراكيز مختلفة (0.1% - 0.8% ) (غم / مل) قبل وبعد اضافة بعض البوليمرات ومن هذه البوليمرات بوليمر بولي اثيلين كلايكول (PEG) والبوليمر بولي مثيل ميثاكريليت ( PMMA) باوزان مختلفة. وتم دراسة الخصائص الريولوجية والبصرية والميكانيكية والكهربائية للنماذج المحضرة السائلة والصلبة حيث : تم قياس الخصائص الريولوجية للعينات مثل (الكثافة واللزوجة القصية)، ثم تم قياس انواع اخرى من اللزوجة مثل اللزوجة النسبية , اللزوجة النوعية , اللزوجة المختزلة , اللزوجة الذاتية ، اما معدل اللزوجة للوزن الجزيئي ونصف القطر الجزيئي الفعال فقد تم حسابها نظريا.وكذلك تم قياس الخصائص البصرية مثل (الامتصاصية ومعامل الانكسار)، ثم من هذه الخصائص تم حساب الخصائص الاخرى مثل (النفاذية ، الانعكاسية ، ومعامل الامتصاص للموجات الكهرومغناطيسية ، وزمن العمر الطبيعي، ومعامل الرقة ، الانعكاس المولاري، الزاوية الحرجة وزاوية بروستر).وايضا تم قياس الخصائص الميكانيكية مثل السرعة للموجات فوق الصوتية والتي تم قياسها على تردد ثابت قيمته (25 كيلو هرتز) اما الخصائص الاخرى تم حسابها نظريا , مثل : معامل الامتصاص للموجات فوق الصوتية , زمن الاسترخاء , سعة الاسترخاء , الانضغاطية , معامل المرونـة الحجمي , الممانعة الصوتية النوعـــية .بالنسبة للخصائص الكهربائية تم قياسها مثل التوصيلة الكهربائية ، وبالتالي حسبت الخصائص الاخرى مثل التوصيلية المولارية ودرجة التفكك . وقد تم قياس كل هذه الخصائص لحالتين قبل وبعد الاضافة في درجة حرارة الغرفة .واظهرت النتائج ان الخصائص السابقة تزداد مع زيادة التركيز باستثناء اللزوجة الذاتية ، النفاذية، الانعكاسية المولارية، الزاوية الحرجة، الانضغاطية، التوصيلة المولارية ودرجة التفكك تتناقص مع زيادة التركيز.تم الحصول على نتائج جديدة لمزيج من البوليمر ولقد استخدمت هذه النتائج في جانب من التطبيقات الطبية ، والتي تضمنت الامتصاصية والنفاذية ، وكذلك من ناحية اخرى ، هناك جانب تم تطبيقه وهو ملاحظة تاثير اضافات البوليمرات على بكتيريا جلد الانسان عند استعمال ثلاثة انواع من البكتريا .حيث لاحظنا عدم تاثر البكتريا عند اضافة كل من بوليمر بولي اثيلين كلايكول وبوليمر بولي مثيل ميثاكريليت والمذيب ثنائي الميثيل فورماميد والمستحضر ( بصورة انفرادية) عند اخذ نسبة (1 : 1) لذلك تستخدم كمواد قابلة لامتصاص الاشعة فوق البنفسجية ولاتستخدم كمواد معقمة اما مايخص بوليمر بولي اثيلين اوكسايد فقد لاحظنا تاثر البكتريا به ولمسافة (15) ملم حيث يمكن استخدامه كمادة قابلة لامتصاص الاشعة فوق البنفسجية وكمادة معقمة ويعتبر هذا احد التطبيقات الطبية الجديدة ، لذلك هناك العديد من التطبيقات التجريبية في التطبيقات الطبية المختلفة التي تم الحصول عليها من هذه الدراسة ، مثال على ذلك : عندما نستعمل بولي اثيلين اوكسايد وكذلك عندما نضيف له بوليمر بولي اثيلين كلايكول والبوليمر بولي ميثاكريليت المثيل حيث تم اضافة المزيج الى ثلاثة انواع من مستحضرات التجميل ، وثلاثة انواع من مرهم المفاصل ونوعين من جل الشعر، وهذه المخاليط ادت الى تحسين الامتصاصية عن طريق زيادة امتصاص (الاشعة فوق البنفسجية ) وجعل الجلد اقل تهيجا.ونلاحظ كذلك ان فحوصات (FT - IR) للاطياف اظهرت عدم وجود تفاعل كيميائي بين ( (PEO الذي ووزنه الجزيئي (300000) ومضافاته حيث استخدمت تقنية اقراص (KBr)) لذلك.العلاقة بين الخصائص التي تمت دراستها والتطبيقات الطبية هو الفائدة من زيادة الامتصاصية وتقليل النفاذية حيث ان الفائدة في الاضافة لهذه المراهم للحد من امتصاص الجسم للاشعة فوق البنفسجية، فضلا عن خصائص الريولوجية التي تؤدي لزيادة اللزوجة للمراهم وبالتالي زيادة الكثافة ومعامل الانعكاس مما يقلل من نفاذية الاشعة (الاشعة فوق البنفسجية) للجسم، بالنسبة للخصائص الميكانيكية والكهربائية لوحظ تحسن كبير في هذه الخصائص التي يمكن استخدامها كبحوث وتطبيقات في المستقبل | The dissertation has included study of some physical properties of polymer polyethylene oxide (PEO) dissolved in Dimethylformamide (DMF) with different concentrations ranged from (0.1% - 0.8%) g./ml before and after adding Polymers such as polyethylene glycol (PEG ) and Poly(methyl methacrylate) (PMMA ) of different weights. The rheological, optical, mechanical, electrical properties for samples at prepared by liquid and solid have been studied and the study show : For rheological properties such as : (density and shear viscosity ),has been measured , then other types of viscosities are measured , such as : relative viscosity , specific viscosity , reduced viscosity , intrinsic viscosity. While for viscosity average molecular weight and effective molecular radius have been theoretically calculated. Also the optical properties had been measured such as ( absorbance and refractive index ), then from these properties were calculated optical parameters and optical constants such as ( transmittance, reflectance, absorption coefficient of electromagnetic waves, natural lifetime, coefficient of fineness, molar reflectance, critical angle and Brewster angle ). Also the mechanical properties of ultrasonic wave velocity at a constant frequency (25 kHz) has been measured and other properties were theoretically calculated such as : absorption coefficient of ultrasonic waves , relaxation time , relaxation amplitude , compressibility, bulk modulus , and specific acoustic impedance for ultrasonic waves. For the electrical properties have been measured such as electrical conductivity and other properties such as (molar conductivity and degree of dissociation) have been calculated after that.The results showed that previous properties have increment with the increase of concentration except reduced viscosity , transmittance , molar reflectance ,critical angle, compressibility, molar conductivity and degree of dissociation are decreasing with increasing of concentration . New results were obtained to a combination of polymer and these results have been utilized in the side of medical applications, which included the absorbance and transmittance, in the other hand, the effect of polymer addition on human skin has been applied according to a note , when using three types of bacteria . Where noticed the bacteria is not affected when adding each of the polymer (polyethylene glycol , Poly(methyl methacrylate)) , solvent Dimethylformamide and mixture when taking the ratio (1 : 1) individually , so it is used to absorb ultraviolet rays and not used as sterile . For polymer polyethylene oxide noticed effect on bacteria for distance (15) mm , where it can be used to absorb ultraviolet rays and sterile , this is one of the new medical applications , so there are many experimental applications in different medical applications obtained from this study, such as : The solutions of (PEO) , (PEO - PEG) and (PEO - PMMA) blends that have been added into three types of cosmetics, three types of ointment of joints and two types of hair gel , these blends enhance them by the increase of (UV) absorbance that makes less skin irritation. The (FT - IR) spectra showed that there was no interaction between (PEO) ( 300000 ) and all additives when it has prepared by (KBr) disks technique. The relationship between the properties that have been studied and medical applications in the usefulness increase absorbance and decreases transmittance that has to take advantage of it in the addendum to the ointments to reduce the body's absorption of (UV) rays , as well as rheological properties led to increase the viscosity of ointments and thereby increase the density and reflection coefficient which reduces the transmittance of (UV) rays to the body , for mechanical and electrical properties noticed a significant improvement in these properties, which can be used research and applications for the future

دراسة تطور الجسيمات داخل الغلاف الجوي باستخدام نظام المحاكاة AIRES == Studying of Air Shower Development by AIRES Simulation System

Author name: احمد جمعة حبيب سالم الطائي
Supervisor name: احمد عزيز الربيعي | بتول درعم بلاوة
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: تمثل دراسة الاشعة الكونية ذات الطاقات العالية احد اكثر المواضيع تحديا في مجال الفيزياء الفلكية. اذ ان تفاعل الجسيمات الاولية مع نوى ذرات الهواء داخل الغلاف الجوي الارضي تنتج كم هائل من الجسيمات الجوية. في هذا العمل تم اجراء المحاكاة لوابل من الجسيمات الجوية المشحونة (EAS) من خلال التحقق من معاملات التطور الطولي ( عدد الجسيمات المشحونة N واكبرعمق في الغلاف الجوي الارضي Xmax) باستخدام نظام محاكاة لجسيمات الهواء الذي يدعى يرنامج AIRES عند مدى الطاقة (1014 - 1019) الكترون فولت للجسيمات الاولية مثل (الالكترونات, البوزيترونات, البروتونات, جسيمات كاما, نوى ذرات الحديد) وزوايا السقوط (0o, 10o, 30o). ان محاكاة دالة التوزيع الجانبية (LDF) لوابل من الجسيمات الجوية تم اجراؤها باستخدام برنامج AIRES لطاقات اولية مختلفة, جسيمات اولية مختلفة وزوايا سقوط مختلفة. هذه المحاكاة يمكن ان تستعمل لاعادة بناء نوع وطاقة الجسيم المتولد من وابل من الجسيمات الجوية المشحونة والتي سجلت في منظومات عملية متعددة. لقد تم استخدام نموذج هتلر (Hitler's model) في حساب عدد الجسيمات المشحونة واعلى عمق جوي للتطور الطولي في الغلاف الجوي الارضي لعدد من الجسيمات الاولية المشحونة مثل (الميونات, البايونات, الالكترونات, البرتونات, الفوتونات ونوى ذرات الحديد) عند مدى الطاقة المذكوراعلاه الكترون فولت وزوايا السقوط المذكورة اعلاه . ان حساب دالة التوزيع الجانبية تمت باستخدام صيغةNishimura - Kamata Gresien (NGK)) ) ضمن مدى الطاقة المذكوراعلاه وزوايا سقوط مختلفة (0o, 10o, 30o, 40o, 50o, 60o). ولقد تم برمجة هذه الصيغ بلغة فورتران 90 وباستخدام Compaq Visual Fortran (CVF 6.6) ]لاحظ الملحق [A. وتمت المقارنة بين محاكاة التطور الطولي (N and Xmax) باستخدام نموذج SIBYLL الهادروني مع نموذجين هادرونيين مثل.(QGSJET99 and SIBYLL16) وقد اظهرت هذه المقارنة فرصة جيدة لتحديد سلسلة تفاعلات الاشعة الكونية مع نوى ذرات الهواء في الغلاف الجوي الارضي. ان المقارنة بين نتائج الحسابات النظرية ووالنتائج التجريبية لعدد الجسيمات المشحونة واكبر عمق في الغلاف الجوي للجسيمات الاولية مثل (البروتونات ونوى ذرات الحديد) قد اعطت نتائج جيدة ضمن مدى الطاقات العالية المذكور اعلاه. | The study of high energy cosmic rays represents one of the most challenging in the astroparticle physics fields. The interaction of primary particles with atmospheric nuclei produces huge Extensive Air Showers (EAS). In this work the simulation of EAS is performed by investigating the longitudinal development parameters (number of charged particles N and depth of shower maximum Xmax) using a system of air shower simulation which is called AIRES code at the energy range (1014 - 1019eV) for different primary particles like (electrons, positrons, protons, gamma particles and iron nuclei) and different zenith angles (0o, 10o and 30o). The simulation of the lateral distribution function in EAS is performed using AIRES code for different primary energies, different primary particles and different zenith angles. This simulation can be used to reconstruct the type and energy of the primary particles that generated EAS for charged particles that registered with different EAS arrays. Using Hitler's model the estimation of the number of charged particles and depth of shower maximum of longitudinal development in EAS is performed for different primary particles such us (muons, pions, electrons, protons, photons and iron nuclei) at the same energy range and for the zenith angles mentioned above. The calculation of the lateral distribution function of charged particles is fulfilled using Nishimura Kamata Greisen (NKG) formula in the same energy range above and different zenith angles (0o,10o,30o,400,50o and 60o). These formulas have been programmed by Fortran 90 with the aid of Compaq Visual Fortran (CVF 6.6)(see Appendix A). The comparison between the simulated longitudinal development of the number of charged particles and depth of shower maximum using SIBYLL hadronic model with two hadronic models like (QGSJET99 and SIBYLL16) has shown an opportunity for determination of cosmic ray cascade interactions in EAS. The comparison between the theoretical and experimental data of the number of charged particles and depth of shower maximum for primary particles like (protons and iron nuclei) in EAS gave a good agreement within the energy range mentioned above.

دراسة بعض خصائص فيرايت الاسبنل المحضر بطريقة السيراميك والسول جيل == Studying some Properties of Spinel Ferrite preparing by Ceramic and Sol - Gel Methods

Author name: اثير ابراهيم عبد علي الخفاجي
Supervisor name: كاظم جواد كاظم الشجيري
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: In this research three series of spinel ferrites samples where prepared which is copper - zinc ferrite with general formula (Cu1 - xZnxFe2O4), magnesium - zinc ferrite with general formula (Mg1 - xZnxFe2O4) and nickel - zinc ferrite with general formula (Ni1 - xZnxFe2O4) at (X) values ranging from 0.0 to 1.0, step of 0.2 where (X) represents the proportion of zinc in ferrite, using two preparation methods which is Conventional ceramic method and Sol - Gel method. Three sintering temperatures have been used which is (1000ºC), (1050ºC) and (1100ºC) to determine the effect of sintering temperature on the final specifications of the samples. (Network analyzer device) has been used to studding the microwaves absorption in the range of (X - band) with a frequency range (8 - 12.5 GHz). Also, X - ray diffraction analysis (XRD) has been used to determine the crystal structure and purity of the prepared samples and to calculate the average grain size and micro strain, The samples were examined using a scanning electron microscope device to evaluate the crystal size and to see distribution style after the sintering process, were Also, the density of the prepared samples were measured to calculate the porosity values.The results showed that the best samples with very high absorbency a long the (X - band) is (Mg0.6Zn0.4Fe2O4) and (Cu0.6Zn0.4Fe2O4) at sintering temperature (1100 ºC). This stability and efficiency observed firstly compared with other researches and literatures. Also the resonance peaks for all three types of spinel ferrite appeared at frequencies (8.6, 9.8, 10.0, 10.2, 11.01.11.2, 11.6, 12.0, 12.2) (GHz). X - ray diffraction results showed that all the prepared samples are a poly - crystalline also showed the occurrence of micro strain on the crystals due to effect of the sintering temperature on the crystals.Comparison between the samples prepared by Sol - Gel method and Conventional ceramic method; the result showed the homogeneity of particle size and particle distribution was the best for first method. Whereas the porosity was small for this method

تطوح فقدان الطاقة الجزئي للزركونيا والالومينيا للبروتون وحزم جسيمات الفا == Partial of Energy loss straggling of ZrO2 and Al2O3 for proton and ? - particle beams

Author name: ابراهيم عباس ابراهيم الخزرجي
Supervisor name: رياض خليل احمد العاني
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: تم في هذا العمل اجراء الحساب النظري لمقدار فقدان الطاقة (التطوح) للزركونيا〖(ZrO〗_2) والالومينيا (〖(Al〗_2 O_(3)) لحزم البروتون وجسيمات الفا الساقطة على هذه الاهداف وبطاقات . (T= 0.05, 0.25, 1, 2, 2.5 Mev/u) ان الصيغة لدالة العزل مثل قطب البلازمون التقريبي (PPA) وتعديلاتها من خلال نموذج درود( (Drude - model ، تم اعتمادها لحساب الاحتمالية للبروتونات وحزم جسيمات الفا المسببة للتهيجات الالكترونية في الاهداف المستعملة فقد حسبت مع الاخذ بنظر الاعتبار تاثير طول الحجب (Screening Length) والتي اظهرت توافقا جيدا مع نتائج حسابية تم التوصل اليها في دراسات سابقة، علاوة على حساب قدرة الايقاف الجزئي للشحنة الفعالة ζ(q) (PSPEC) للبروتونات وجسيمات الفا المتحركة خلال اكاسيد مختلفة وبشكل رئيسي بالهدفين المستخدمين في هذا العمل. وكذلك معدل الطاقة < E > ومربع معدل الطاقة للبروتون <〖 E〗^2> تم حسابها ايضا في عملنا الحالي .كما تم كتابة برنامج(Ibrahm - Al2O3.for) بلغة (الفورتران - 90) لاجراء الحسابات العددية موجود نسخة مرفقة منه. | The energy - loss straggling of zirconia (ZrO2) and alumina (Al2O3) has been determined theoretically for proton and alpha - particle beams with incident specific energies (T= 0.05, 0.25, 1, 2, 2.5) (Mev/u). The dielectric formalism like Plasmon Pole Approximation (PPA) and its modified form presentation by Drude - model has been used to calculate the probability for an energetic proton and alpha to produce electronic excitations in target of zirconia (ZrO2) and alumina (Al2O3), taking in consideration screening length effects and good agreement is achieved with previous work. The partial stopping power effective charge (PSPEC) , ζ(q) and partial energy straggling effective charge (PSGEC)η(q) for proton and alpha particle moving through several oxides, namely Al2O3, and ZrO2 have been calculated . Good agreement has been achieved with previous work. Also average energy, <E> and average of square energy <E^2> for proton and alpha particles in Al2O3 and ZrO2 have been calculated in present work.. A program (Ibrahm - Al2O3.for) has been written FORTRANT - 90 for numerical calculation, and a copy of program is available in the present work.

اعتماد عامل التصادم على قدرة الايقاف الالكترونية == Impact - Parameter Dependent Of Electronic Stopping Power

Author name: راشد عويد كاظم
Supervisor name: Khalid A.Ahmed | Khaled S.Ibrahim
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:

ايجاد تراكيز اليورانيوم المنضب في نماذج بايالوجية

Author name: وصفي محمد كاظم التميمي
Supervisor name: شاكر محمود مربط الجبوري | عبد الله احمد رشيد الدليمي
General topic: Physics
Specific topic: Physics
Degree: Master
Language: Arabic
University location: Baghdad
First pages:

تقييم التلوث الاشعاعي والمخاطر الاشعاعية في المنشات النووية المدمرة في موقع التويثة النووي == Radioactive Contamination And Radiological Risk Assessment Of The Destroyed Nuclear Facilities At Al-Tuwaitha Nuclear Site

Author name: ناظم خليل ابراهيم
Supervisor name: عبد الله احمد رشيد | ندى فرحان كاظم
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:

استخدام منظومة من ثلاث كيوبتات من الفرميونات كاداة لمعالجة المعلومات الكمية == The Utilization Of Three Qubits System Of Fermions As A Tool For Quantum Information Processing

Author name: مزهر باقر صالح
Supervisor name: لؤي ادور جورج | كاظم جواد كاظم
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:

تحضير وتشخيص اغشية اوكسيد النحاس الرقيقة بتقنية الترسيب البخار الكيميائي CVD للتطبيقات التحسيسة == Synthesis And Characterization Of Copper Oxide Thin Films By CVD Technique For Sensing Applications

Author name: محمود محمد كريم
Supervisor name: انوار علي حسين الفؤادي | ضياء هادي حسين
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:

تحسين وتصنيف صور الاجسام المتحركة تحت الماء == Under Water Images Enhancement And Classification For Moving Objects

Author name: فاطمة اسماعيل عباس
Supervisor name: علي عبد داوود الزكي | راضي شدهان حمودي الطويل
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:

تحضير ودراسة خصائص معادن نبيلة واكاسيد ذات تركيب نانوية لغرض التطبيقات الفوتوفولطائية باستخدام تقنية القشط بالليزر == Preparation And Characterization Of Noble Metals And Oxides Nanostructure For Photovoltaic Applications Using Laser Ablation Technique

Author name: عدي نعيم سلمان جاسم
Supervisor name: ابراهيم رمضان عاكول
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:

دراسة تاثير المجال الكهربائي على اطياف الفلورة لمادة عضوية (-1نفثول) == Study Effect of Electric Field on Fluorescence Spectra of organic material (1-naphthol)

Author name: شموس حاتم محمد
Supervisor name: زياد عدنان صالح
General topic: Physics
Specific topic: Physics
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
1 ... 12 13 14 15 16 ... 23