عرض: 25 50 75 100 النتائج

نتائج البحث: 75 من أصل 49,308

التذبذب والسلوك المحاذي لحلول المعادلات التفاضلية التكاملية المحايدة من الرتبة الاولى والثانية Oscillation and Asymptotic Behavior of Solutions of First and Second Order Neutral Integro - Differential Equations

اسم المؤلف: تغريد حسين عبد
اسم المشرف: حسين علي محمد
الموضوع العام: علوم الرياضيات
السنة: 2016
الموضوع الدقيق: المعادلات التفاضلية
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: الهدف من هذه الرسالة هو تعميم وتوسيع للنتائج التي توصل اليها (olach) في بحثه الذي نشره سنة (2005), حيث انه قد درس وجود حل موجب وكذلك درس تذبذب كل حلول المعادلة التفاضلية التكاملية التباطؤية, وقد استخرج بعض الشروط الضرورية والكافية لضمان تذبذب حلول المعادلة التفاضلية التكاملية التباطؤية. في هذه الرسالة تمت دراسة المعادلة التفاضلية التكاملية المحايدة من الرتبة الاولى, حيث اننا صنفنا فيها المعادلة التفاضلية التكاملية المحايدة الى اربعة انواع, وقد تم استخراج شروط ضرورية وكافية لضمان تذبذب حلول هذه المعادلات, وكذلك شروط ضرورية وكافية اخرى لضمان تقارب جميع الحلول لهذه المعادلات الى الصفر او تباعدها. بالاضافة الى ذلك, اربعة انماط من المعادلات التفاضلية التكاملية المحايدة من الرتبة الثانية قد تمت دراستها, وقد تم استخراج شروط ضرورية وكافية لضمان تذبذب حلول هذه المعادلات, وكذلك شروط شروط ضرورية وكافية اخرى لضمان تقارب جميع الحلول لهذه المعادلات الى الصفر او تباعدها. وقد تم عرض بعض الامثلة لتوضيح النتائج التي تم الحصول عليها. | The aim of this thesis, is to generalized and extended the results of the paper : Olach (2005)[24]. Where he study the existence of positive solution and the oscillation of all solution of delay integro - differential equation, where he extracted some necessary and sufficient conditions to grantee the oscillation of all solutions of delay integro - differential equation. In this thesis, it has been studied neutral integro - differential equation of the first order, where we classify four types of neutral integro - differential equation and extracted necessary and sufficient conditions for these types to ensure the oscillation and the convergence to zero or divergence for all solutions of these equations. Moreover, four types of neutral integro - differential equations of the second order has been studied and obtained some necessary and sufficient conditions to ensure the oscillation of all solutions to this equation, and another necessary and sufficient conditions obtained for all solutions to converge to zero or diverge as t tends to infinity. Some examples are included to illustrate the obtained results.

حل مشكلة النقل الضبابية باستخدام دالة الرتب مع درجة العضوية المثلثية Solving Fuzzy Transportation Problem by Using Ranking Function with Triangular Membership

اسم المؤلف: انفال حسن ذياب
اسم المشرف: ايدن حسن حسين الكناني عبد الرحيم خلف الحارثي
الموضوع العام: علوم الرياضيات
السنة: 2015
الموضوع الدقيق: الرياضيات
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا الرسالة تم دراسة مشكلة النقل الضبابية التي تكون فيها كلفة النقل وكمية الطلب والعرض هي اعداد ضبابية وان دالة الانتماء المستخدمة لايجاد الاعداد الضبابية هي الدالة المثلثية.في هذا الرسالة تم استخدام العديد من الخوارزميات بالاضافة الى اقتراح خوارزميتين جديدتين تعتمدان على دالة Yager لازالة الضبابية من مشكلة النقل.وقد تم استخدام الامثلة العددية والبيانات الحقيقية لاظهار مدى كفاءة جميع الخوارزميات المستخدمة في الرسالة والمقارنة بينهما,حيث تم حل مشكلة النقل الهشه ((crisp باستخدام خوارزمية فوجل بالاضافة الى الطريقة المعدلة (Modified distribution) وتم التاكد من الحل باستخدام برنامج (Win.QSB) اخيرا، تم تطبيق خوارزميات الحل المستخدمة في الرسالة على مشكلة نقل حقيقيه والتي تم الحصول على بياناتها من شركة توزيع المنتجات النفطية والمقارنه بين خوارزميات الحل من خلال تقليل الكلف وتم ايجاد نتائج هذة المشكلة . | In this thesis fuzzy transportation problem in which the cost of transportation and the amount of demand and supply are fuzzy numbers studied and that the membership function is used to find the fuzzy numbers are triangular membership function. Many algorithms have studied and proposed two algorithms have been used depending on proposed ranking function to remove fuzziness solution of fuzzy transportation problem. A numerical example and real data are used to show the efficiency of all these algorithms which used in this thesis with respect to the Vogel's algorithm with modified distribution and sure the solution by (WinQSB). Finally, during the application of algorithms solution we studied the problem of the transfer of real whose data was obtained from Oil Products Distribution Company. Comparison between algorithms solution has been organized by minimizing costs and the results of this problem have been achieved

بعض انواع من المقاسات المنضغطه والمنكمشه Some types of Retractable and Compressible Modules

اسم المؤلف: اسراء حسن مسلم
اسم المشرف: ليلى سلمان محمود
الموضوع العام: علوم الرياضيات
السنة: 2016
الموضوع الدقيق: الرياضيات
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: لتكن R حلقة ابداليه ذات عنصر محايد, ولتكن M وN مقاسات يساريه احاديه على R. ولتكن〖Hom〗_R (M,N) مجموعة كل التشاكلات المقاسية من M الى N. من المعروف ان خواص وتمييزات 〖Hom〗_R (M,N) كمقاس على R ممكن ان تحدد عن طريق خواص وتمييزات R, M وN وكذلك بعض خواص وتمييزات R, M وN ممكن ان تحدد عن طريق خواص وتمييزات〖Hom〗_R (M,N), لذا فان العديد من الباحثين اهتموا بدراسة 〖Hom〗_R (M,N) . بعض الدراسات تركزت حول استخدام خاصية 〖Hom〗_R (M,N)≠0 لكل مقاس جزئي N غير صفري من M في هذه الحاله يطلق على M بانه مقاس المنكمشة, بينما اذا كان كل مقاس جزئي غير صفري من M يحوي على نسخة لـ M بمعنى انه يوجد تشاكل متباين في مجموعة 〖Hom〗_R (M,N) فيطلق على M بانه مقاس منضغط, من الواضح ان صنف المقاسات المنضغطه محتوات فعليا في صنف المقاسات المنكمشة. في هذا العمل سوف نعطي دراسة مفصلة حول المقاسات المنضغطه الصغيرة والمقاسات المنكمشة الصغيرة, فضلا على ذلك، اعمامات اخرى للمقاسات المنضغطه والمقاسات المنكمشة تم تقديمها ودراستها مثل المقاسات المنضغطه النقية والمقاسات المنكمشة النقيه, واخيرا المقاسات

العلامات الاحيائية لنفط تكوين الزبير ومناشئه في مدينة البصرة جنوب العراق Biomarkers of Zubair Formation Oil andits Sources in Basrah Region Southern Iraq

اسم المؤلف: هبة عادل ذيبان الحيدري
الموضوع العام: علم الارض
السنة: 2009
الموضوع الدقيق: علم الارض
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: In this thesis, Zubair Formation is studied for its lithological properties, oil accumulation, and source rocks potentiality by : One dimension petroleum - system models were developed to simulate burial - thermal history, source rock maturity and the timing and extent of petroleum generation; the generation of Zubair Formation oil began in the Tertiary and continued till present day. Modeled transformation ratios indicate that 53 - 75% of its generation potential has been reached. In contrast, younger source rocks are immature to early mature (<20% generation), whereas older source rocks are mature to over mature with 100% generation.The study of (14) thin section of core samples, showed that Zubair Formation has good reservoir properties of 19 - 28% porosity and 80 to 500 md permeability.Palynological analysis of (15) slides from core and cutting samples represent the organic matter of the shale in the Zubair Formation is mature, kerogen type II, III according Van Krevlen diagram.Gas chromatography - mass spectrometry devise of two oil samples represent the alkane peaks of carbon in oil, bulk composition of oil, the ratios of biomarkers, and non - biomarkers. These could indicate that source rocks for this oil are carbonate (Sulaiy - Yammama Formation) deposited in reduced marine environment and mature kerogen type II with algae origin with source rock age is Upper Jurassic - Lower Cretaceous.

تحديد الخزان الجوفي وتقييم معاملاته الهيدروليكية من القياسات السطحية للمقاومة النوعية في حوض شهرزور شمال العراق Aquifer delineation and evaluation of hydraulic parameters from surfacial resistivity measurements in Sharazoor basin ? North East Iraq

اسم المؤلف: عبد الله كريم امين
اسم المشرف: جاسم محمد ثابت بختار قادر عزيز
الموضوع العام: علم الارض
السنة: 2008
الموضوع الدقيق: الجيوفيزياء
الدرجة: دكتوراه
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The studied area is located at (8Km) south east of Sulaimaniya city - North East Iraq. It is represented by Sharazoor plain. The studied area was surveyed by (281) Vertical Electrical Sounding (VES) points distributed along six profiles running parallel to the strike direction of strata and covered an area of (200 km2).Apparent resistivity curves are plotted and interpreted using of both partial matching with auxiliary curves by Ebert method and the advance (IPI2 - win) software program through the application of forward calculation and inverse modeling.The quantitative interpretation results are used to construct six geoelectrical sections along profiles, and then converted to geological sections after correlating with the geological wells information distributed throughout the studied area. The results of interpretation show that the unconfined aquifer consisted of gravel, sand with clay of recent alluvial deposits with the upper part of middle Tanjero Fn.consisting alternating layers of sand, limestone, marly limestone overlying marly layer, which acts as an impermeable layer. This is clearly observed from well lithological sections shown in fence diagram passing throughout the studied area.Porosity values of the aquifer in all the distributed wells of the studied area are calculated through the applying of both Archie formula and a technique of density formula. The porosity values of both formulas are drawn with the resistivity values of the aquifer in the wells. The relationship of the density formula is given a positive linear relationship with a relative coefficient (R=98.29) for recent deposit aquifer with the presence of clay content, through which it decreases from north west beginning part toward the south east end part of the studied area. This will be clearly observed from increasing of the porosity. Furthermore there is no any condition for its application. Where as for Archie formula relationship shows also a linear positive relationship with lower relative coefficient (R=87.55). Therefore density formula can be considered as an applicable technique for calculating porosity of the recent deposits with clay. Further more the extracted relation may considered as slandered ration for direct calculation of porosity values from aquifer resistivity values in the studied area and surrounding areas having the same sequences.The estimated values of the hydraulic parameters especially transmissivity (T) using both the manual method by Cooper Jacob and the computer software by (AQTESOLVE) program. The results of both methods are shown in Table (5 - 3).Comparing values of (T) by both methods, the computer program gives higher values, which is probably due to the correction of the manual values by taking into account both outer diameter (rw) and casing diameter (rc) of the single well aquifer test. The hydraulic conductivity (K) is calculated by dividing transmissivity by the saturated thickness of the aquifer. Aquifer transmissivity values are range between (22.81 m2/day) from the beginning to (44.21 m2/day) at the central basin of the studied area. And hydraulic conductivity (K) values range between (0.68 m/day) at the NW - part to (1.6 m/day) at the SE - part of the studied area. Both results values of (T) and (K) are located within the standard range values of unconsolidated recent deposits, which are clearly shown increasing values from the beginning part toward the central part at the end of the studied area. Such increasing can be related to diminishing of the clay content as well as increasing of sand and gravel in the aquifer toward the central basin located at the south eastern - part of the studied area. The results of the hydraulic parameters are tied with the resultant geoelectrical parameters, on the bases of the relations given by (Frohlic, 1994). According to these relations, Frohlic has suggested two models for the aquifer. In the first model, he suggested a variable thickness with constant resistivity and hydraulic conductivity, while in second model, he suggested a constant thickness with variable resistivity and hydraulic conductivity. The extracted relations of the present study are not conformable to any of the Frohlics linear models. But by comparing with modern models suggested by Singh (2005), they show best fit with the positive hyperbolic relationship, because all the three parameters are variable throughout the studied area. The interpretation of such relationship is related to decreasing for the aquifer clay content and thus increasing the resistivity values from NW - part toward the SE - part of the studied area. Consequently the ground water movement takes the same direction. It can be possible to evaluate hydraulic parameters from geoelectrical parameters. Transmissivity (T) and hydraulic conductivity (K) can be estimated from resistivity (ñ) or transverse resistivity (ñTr) relations or any other extracted relations in this study can be applied.Geologic sections and extracted relations between geoelectrical and hydraulic parameters can be shown that Sharazoor basin includes of unconfined aquifer. The aquifer consists of recent alluvial as (gravel, sand with clay content) and repeated thin sequence of part of middle Tanjero Fn. (sandstone, limestone and marly limestone) overlying impermeable layer of marl. The thickness values of the aquifer range between less than (20m) and resistivity values (32Ù.m) at NW - part consisting of recent and thin layers of upper part of middle Tanjero Fn., where as it increases to more than (80m) and resistivity value (72Ù.m) with increasing recent deposit and decreasing or disappearing limestone and marly limestone toward the central basin.Further more it is also concluded that the resistivity values for recent alluvial deposit range between (20Ù.m) to less than (60Ù.m), and for middle Tanjero Fn.range between more than (60Ù.m) to around (90Ù.m), where as for lower Tanjero Fn. from more than (90Ù.m) to more than (150Ù.m).

دراسة صدع بيخير - اشكفت وتاثيره على عمليات الطي في شمال غرب العراق Bakhair - Ishkaft Fault and its Influence on Folding Process in North West Iraq

اسم المؤلف: هالة عطاء الموسوي
اسم المشرف: منال شاكر الكبيسي صفاء الدين فخري فؤاد
الموضوع العام: علم الارض
السنة: 2004
الموضوع الدقيق: علم الارض
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تقع منطقة الدراسة شمال غرب العراق في الجزء الشمالي من الصفيحة العربية وضمن نطاق زاكروس الجبلي . تناول البحث دراسة تركيبية مفصلة لصدع بيخير - اشكفت الذي تم تحديد خواصه التركيبية وامتداداته لاول مرة وتاثيره على الطيات المحدبة في منطقة الدراسة والتي تشمل طية بيخير شمالا، عين زالة، بطمة، كصير، اشكفت واخيرا طية ساسان جنوبا، كما تم دراسة مورفوتكتونية منطقة الصدع وذلك من خلال تفسير الصور الجوية ورسم الخريطة المورفوتكتونية لغرض تحديد تاثير الوضع التركيبي على تطور الاشكال الارضية وشبكات التصريف المائية وتبين وجود ستة وحدات جيومورفولوجية في منطقة الدراسة . شملت الدراسة تصنيف هندسي للطيات بالاعتماد على قيمة زواياها الداخلية وعلى النسبة بين اطوالها المحورية الى عرضها واتضح ان معظمها من النوع المعتدل القصير وهي تمتد باتجاه محوري شرق - غرب بشكل عام يقطعها صدع مضربي اقليمي (صدع بيخير - اشكفت) ذو ازاحة يسارية مؤديا الى حدوث ازاحة (انقطاع) وتغيرات تركيبية في الشكل الهندسي لهذه الطيات، كما تم تصنيف الكسور النظامية الثانوية في المنطقة الى مجموعتين من الكسور الشدية واربعة انظمة من الكسور القصية جميعها تكونت تحت تاثير نفس القوى التكتونية المسببة لعمليات الطي والتصدع في المنطقة . قسمت الطيات في منطقة الدراسة الى نوعين الاول هو الطيات الانضغاطية البسيطة والثاني هو الطيات المصاحبة لتقدم الصدوع وقد تكونت جميعها في اواخر العصر الثلاثي نتيجة لضغط اقليمي افقي باتجاه شمال - جنوب ، وقد انجز الطي بفعل ميكانيكيتين هما ميكانيكية السطح المتعادل وميكانيكية الانزلاق الانثنائي . تبين من دراسة صدع بيخير - اشكفت المضربي والطيات المتاثرة به ان العلاقة الزمنية بين نمو الطيات والتصدع تختلف من منطقة الى اخرى اعتمادا على قربها وبعدها من حافة الصفيحة العربية . | The study area is located in the northwestern part of Iraq within the Zagros Folded belt of the northern part of the Arabian Plate .A detalied structural study and analysis of the area is carried out . The study includes the identification of a regional left lateral strike - slip fault (named Bakhair - Ishkaft fault) . The influence of the fault on the folds as well as its impact on the morphotectonic picture of the area has been discussed and analysied . Based on the amount of the interlimb angle and length to width ratio, most of the east - west trending folds of the area fall within the gentle - brachy category .Genetically, the folds are subdivided into two classes; the first is simple buckle folds developed by a combination of flexural slip and neutral surface folding mechanisms and the second class is compressional fault propagation fold . The folding of the area is directly related to the Late Tertiary compression . Bakhair - Ishkaft strike - slip fault dislocate some folds of the area with a left - lateral displacement and change of the style of the others .The present study revealed that the faulting and the folding occurred under the same stress field, but their time of initiation and growth were largely controlled by their relative position with respect to the Arabian Plate margin

دراسة بيتروغرافية وجيوكيميائية واصل تمعدنات النحاس - حديد والصخور المرافقة في منطقة (واراز) محافظة السليمانية /شمال شرق العراق Petrography, Geochemistry and Genesis of Copper - Iron Mineralization and Associated Rocks in Waraz Area, Sulaimanya, NE Iraq

اسم المؤلف: عرفان عمر موسى
اسم المشرف: ايتن هادي علي رضا خلدون صبحي البصام
الموضوع العام: علم الارض
السنة: 2007
الموضوع الدقيق: علم الارض
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تمثل منطقة واراز الواقعة في الجزء الشمالي الشرقي من العراق ضمن معقد افيولايت ماوات.وقد ركز البحث الحالي على دراسة تمعدنات النحاس والصخور الحاضنة للنحاس في منطقة واراز.تم تقديم خارطة جيولوجية مفصلة للمنطقة في هذه الدراسة, حيث تم فيها تحديد عشر وحدات وهي بسلت وهورنبلند بايروكسينايت وسليت واندسايت وبونينايت وديورايت ودسايت وكابرو وئبيدوسايت وعروق الكوارتز. ولقد حددنا نوعين من التشققات الرايديال والسكيموتون في منطقة الدراسة وقد تم قياس كل منها ايضا. ان وجود هذين النوعين من التشققات يدل ان منطقة الدراسة هي قص ( Shear ). من خلال دراسة 170 شريحة تبين الى ان النماذج الصخرية تعرضت الى التحلل والتحول بدرجات متباينة واحتفظت بشكل عام على معدنية ونسيجة الاصلي. من خلال دراسة الشرائح ال (170) المذكورة اعلاه , حددنا المكونات الرئيسية للصخور فوق القاعدية وهذه المكونات هي كلاينوبايروكسين وهورنبلند واولفين وئورثوبايروكسين, وكذالك للصخور القاعدية هي كلاينوبايروكسين وكالسيك بلاجيوكليس واولفين , بينما في الصخور المتوسطة وجدنا ان المكونات الرئيسية هي بلاجيوكليس وكوارتز, ووجدنا ان المكونات الرئيسية للصخور الحامضية هي كوارتز وبلاجيوكليس.تبين من خلال دراسة شرائح صقلية بان الصخور الدراسة الحالية تحتوى على نوعين من التمعدنات وهما كبريتات واكاسيد, وتبين انهما تعرضت للتحلل وانتج من خلالها معادن ثانوية.اعتمادا على المعدنية والدلائل الجيوكيميائية هناك نوعين من التمعدنات حسب المنشا׃ - الاولى التجمعات الصهيرية واللتي تكون اصلية المنشا ,والثانية هي الحرمائية اللتي تكون لاحقة المنشا.تم اختيار تسعة عشر نموذج صخري للتحليل الكيميائي باستخدام تقنيةICP .تبينت ان الغالبية الصخور الدراسة تحتوي على محتوى تيتانيوم واطيء متمثلة بصخور اجلزر القوسية بينما احتوى بعضها على محتوى تيتانيوم واطيء جدا متمثلة بصخوربونينايت.وتمتاز تلك الانواع من الصخورباغتنائها لعناصر LILE وافتقارها لعناصر HFSE وعناصر ارضية نادرة.اعتمادا على دراسة عناصر ارضية نادرة ان الصخور انتجت من( garnet free source mantle ) وان هذة الصخور نتجت عن تبلور تجزئي لصهير البزلتي ناتج عن انصهار جزئي لجبة مستنزفة ,وان نسبة الانصهار الجزئي حوالي ( 20% - 40%). | This study deals with the petrography, mineralogy, geochemistry, and genesis of the copper - iron mineralization and associated rocks in the Waraz area. An area of about 2 km2 is selected within the Zagros Suture Zone north - east of Iraq. A detailed geological map of the area is presented in the sequel of the thesis, in which 10 units has been determined, basalts, hornblende pyroxenite, slate, andesite, boninite, diorite, dacite, gabbro, epidosite, quartz vein. In the field determined two types of fractures riedal and skempton each being measured as well. The presence of these two types of fractures witnesses that the study field is shear. The study of (170) thin sections revealed that the rocks of the area were subjected to alteration and metamorphism in various degrees while in general, preserving their original mineralogy and texture. Throughout the study of the above mentioned (170) thin sections, we have determined the major minerals of ultrbasic rocks which are clinopyroxene, hornblend, olivine and orthopyroxene. That of basic ones is clinopyroxene, calcic plagioclase and olivine, that of intermediate ones are plagioclase and quartz, and that of acidic ones are quartz and plagioclase. The polished sections (35 sections) witnesses that there are two main types of mineralization; sulfides and oxides, most of which were subjected to alteration producing secondary minerals. Depending on mineralogical and geochemical evidences, the genesis of the sulfides and oxides is concluded to be of two types : magmatic segregation which is categorized to be syngenetic and hydrothermal processes which is categorized to be epigenetic. Nineteen rock samples were selected to test for geochemical analysis using ICP technique (inductive couple plasma) which establishes that the rocks contain a little amount of TiO2 that represents island arc tholeiite rocks while some of the samples contain a very little amount of TiO2 that represents Boninite rocks. The samples are characterized by enrichment in large ion lithophilic elements and depletion in high field strength elements (HFSE) as well as depletion in rare earth elements (REE). Accordingly the study area is supra subduction zone. Based on the study of the REE, concluded that the rocks return to a unique mantle source which is garnet free mantle source. The rocks are formed due to fractional crystallization of a basaltic magma emerged as a consequence of the partial melting of a depleted mantle, ranges between % 20 - 40.

دراسة السرع الزلزالية باستخدام الموجات فوق الصوتية لبعض الخواص الجيوتكنيكية لمقالع الحجر الجيري في محافظة السليمانية STUDY OF SEISMIC VELOCITIES USING ULRTRASONIC WAVES FOR SOME GEOTECHNICAL PROPERTIES IN LIMESTONE QUARRIES SULAIMANIA - PROVINCE

اسم المؤلف: حسن علي هاشم
اسم المشرف: سلمان زين العابدين خورشيد
الموضوع العام: علم الارض
السنة: 2009
الموضوع الدقيق: علم الارض
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: دراسة الخواص الجيوتكنيكية بواسطة استخدام السرع الزلزالية لصخور الحجر الجيري المستعمل في صناعة السمنت لثلاثة مواقع مختارة في محافظة السليمانية وهي : (سرجنار وطاسلوجة وبازيان)، جمعت النماذج الصخرية وعددها (30) نموذجا لكل موقع، وقطعت بشكل مكعب لمعرفة خاصية التماثل، استخدم جهاز الموجات فوق الصوتية لقياس السرعة الطولية والقصية وبثلاثة اتجاهات، وكانت السرعة الطولية للموقع الاول تتراوح بين (6287.9 4522.5 - ) م\ثا ,والسرعة القصية تتراوح بين 2344.6 - 3446.9)) م\ثا. اما في الموقع الثاني فكانت السرعة الطولية تتراوح بين (5620.6 - 3925.5) م\ثا، والسرعة القصية تتراوح بين ( - 2802.1 2231.8) م\ثا. بينما في الموقع الثالث السرعة الطولية تتراوح بين (4803.4 - 4059.2) م\ثا، والسرعة القصية تراوحت بين (2658 - 2072.1) م\ثا، فضلا عن قياس الكثافة لجميع النماذج. وتم حساب معاملات المرونة الديناميكية المختلفة (E, K, σ, μ, λ, Z, Im, ko, ф, Ip) لكل موقع وكانت قيمة كل معامل تتراوح على النحو الاتي : (34GPa (E=56 - و(K=42.6 - 31.4GPa) و(0.32 ــ0.31=σ) و(μ=18.4 - 13.3GPa) و(λ=31 - 22.5GPa) و(z=1294x10³ - 1115x10³kg/m².sec) و(Im=[ - 0.242] - [ - 0.27]) و(ko=0.465 - 0.452)و(ф=33 - 32)و(Ip=9.4 - 7.4) فضلا عن قياس المسامية بوساطة الاجهزة المتوافرة في قسم هندسة النفط وبلغت اقل قيمة لها في الموقع الاول (2.4%) والموقع الثاني (3.8%)، واعلى قيمة في الموقع الثالث (6.19%). وتم التوصل الى العديد من العلاقات التي تربط بين السرع الزلزالية ومعاملات المرونة المختلفة، وتم حساب معامل يونك السكوني Static لـ (9) نماذج وكانت قيمته تتراوح بين (1.2 - 13GPa)، وبعد اشباع النماذج بالماء لوحظ انخفاض السرع الزلزالية وبنسبة (21%) للسرعة الطولية والقصية في الموقع الاول على التوالي. اما في الموقع الثاني فكانت نسبة الاختلاف (3%) للسرعة الطولية والقصية، بينما في الموقع الثالث فان السرع تزداد لمعظم النماذج عند تشبيعها بالماء بمقدار (%5.5) للموجتين الطولية والقصية. | Using seismic velocities to study of the geotechnical properties forlimestone rock used in cement industry for three sites selected in the province of Sulaymaniyah are (Sarchinar, Tasloja, Bazian), 30 samples were collected in each site, each sample cut as cubic shape for studying the isotropy, using Ultrasonic wave for measuring the velocity of longitudinal and shear waves in three dimensions. The velocity of Vp for the first site ranges between (6287.9 - 4522.5) m/sec were the velocity of Vs ranges between ( 2344.6 - 3446.9) m/sec but at the second site velocity of Vp was ranges between (5620.6 - 3925.5) m/sec and velocity of Vs ranges between (2802.1 - 2231.8) m/sec ,while at the third site the velocity of Vp ranges between (4803.4 - 4059.2) m/sec, and velocity of Vs ranges between (2658 - 2072.1), m/sec, as well as measuring of the densities of all sample were calculated to get the dynamic elastic properties (E, K, σ, μ, λ, Z, Im , ko, ф, Ip) for each site and the average were as follows : (E=56 - 34GPa),(K=42.6 - 31.4GPa),(σ=0.31 - 0.32),(μ=18.4 - 13.3GPa), (λ=31 - 22.5GPa),(z=1294x10³ - 1115x10³kg/m².sec),(Im=[ - 0.242] - [ - 0.27]), (ko=0.465 - 0.452) ,(ф=33 - 32),(Ip=9.4 - 7.45), the porosities of all samples in three sites were measuring in petroleum department, engineering collage was in the first site (2.4%) and the highest value was in the third site (6.19%) many mathematical relationship were calculated between the velocities and elastic modules also static Young's module were calculated for (9) sample and the value of it ranges between (1.2 - 13 GPa). The saturated samples velocities show deceasing in seismic velocities (21%) in the first site, (3%) in the second site and about (5.5%) in the third site.

مسح جيوكيميائي لمكاشف الاوليكوسين - المايوسين والتربة الحديثة بين القائم والرمادي،غرب العراق Geochemical survey of the Oligocene - Miocene exposures and recent soil between Al - Qaim and Ramadi, West of Iraq

اسم المؤلف: صفوك عاصي حسین العبیدي
اسم المشرف: صالح محمد عوض
الموضوع العام: علم الارض
السنة: 2015
الموضوع الدقيق: الجيوكيمياء
الدرجة: دكتوراه
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Rock geochemical survey was conducted on the exposures of Upper Oligocene - Middle Miocene successions (Anah, Euphrates, and Fatha formations) along the western bank of the Euphrates River from Al - Qaim to Abu - Jir village near Al - Ramadi. Soil geochemical survey was also carried out in area located between Al - Baghdadi and Abu - Jir village. A total of 113 Samples were analyzed for major, minor components (CaO, MgO, SiO2, Al2O3, Fe2O3, Na2O3, K2O, TiO2, MnO, P2O5, SO3, and loss on ignition (LOI)), also some trace elements were analyzed (Rb, Ba, Sr, V, Cr, Ni, Cu, Zn, Ga, Cd, Th and U). Seven (7) samples were collected from Anah Formation from its exposure in Haqlan site; Thirty two (32) samples were collected from the Euphrates outcrops along the traverses of about 192 km, twenty nine (29) samples also of Euphrates Formation were collected from six stratigraphic sections (Al - Khaniq, Samndan, Al - Fuhaimi, Haqlan, Raghadan, and Al - Baghdadi); Twenty five (25) samples were collected from Fatha Formation along a traverseof about 253 km. In addition, twenty (20) soil samples had been collected as well.Mineral investigation showed a prevalence of pure calcite (97.14%) in Anah Formation, pointing out a non - dolomitzed typical reef facies, whereas, in the Euphrates Formation, the predominant mineral in traverse samples is dolomite of (82.02%) average. The vertical distribution of minerals in Euphrates Formation also emphasized the prevalent of dolomite in all stratigraphic sections, except in Haglan and Al - Baghdadi sections, where calcite is a predominant (94.13% and 58.47% respectively). The lateral mineralogical distribution in the Fatha Formation reveals that the dolomite (36.5%) is the main mineral, followed by gypsum (32.5%), then calcite (16.9%), clay minerals and quartz (12 %). The main mineral constituents of soil are calcite (30.2%), gypsum (28.03%), clay minerals and quartz (21.81%), dolomite (12.12%). The Rocks in these Formations are geochemically classified according to Ca/Mg ratio. Consequently, Anah Formation is considered as calcitic limestone of high purity, Euphrates Formation rockswere classified to slightly calcareous dolomite, calcareous dolomite, and dolomite and Fatha Formation carbonate rocks were classified to highly dolomitic limestone, dolomite, slightly calcareous dolomite, and calcareous dolomite.The vast majority of major, minor oxides (Al2O3, SiO2, Fe2O3, Na2O3, K2O, TiO2, MnO, P2O5) and trace elements (Rb, V, Cr, Ni, Cu, Zn, Ga, and Th), in Anah, Euphrates, Fatha and soil samples are mainly incorporated within clay minerals. The Ba, Cd, have weak relationship with alumina because they didn't incorporate within clay minerals, but may exist within organic matter and carbonate minerals, while Sr incorporated in carbonate rocks and gypsum and U in dolomite.The geogenic is the main factor controlling the soil chemistry in the study area. It is a residual deposits that had been mostly derived from the parent rocks of Fatha Formation, rather than the Euphrates Formation forming sedimentary overburden of different thickness. The dominance of trace elements in soil as compared to Fatha and Euphrates samples can be ordered as follow : V, Zn, Cr, Ni, Cu, Sr, Rb, Ga, Th, is ordered as : Soil> Fatha Formation > Euphrates Formation.The spatial distribution of major, minor and trace elements are presented on dot maps, and their lateral variations are graphically presented and explained. Then, by application the accumulative probability curve method, the geochemical background, threshold and anomaly of minor and trace elements in Euphrates, Fatha formations and soil samples are computed and determined. The most determined anomalous values of elements are represent local and insignificant anomalies and not traced to mineralization. However significant anomalies recorded in certain soil samples, such as samples no. 42s display Ba significant anomaly (2988 ppm), 6H is characterized by peculiar high concentration of Sr (5680 ppm) which considered as anomalous soil sample of celestite mineralization, and Sample no. 65s exclusively was characterized by high abundance of pure native sulfur (69.19%) potentially indicates a significant sulfur mineralization.The study showed that the Anah Formation had been deposited in reef environment. Sr was used as an evidence of the depth of the sedimentary basin, the low Sr content in the Euphrates Formation as a result of dolomitization impact that released Sr from calcite lattice. The Euphrates Formation was deposited in the shallow lagoon environment. In the Middle Miocene, circumstances of the sedimentary basin have been changed to shallow, semi - restricted highly evaporitic, hypersaline lagoon environment of Fatha Formation.

الجوانب الاقتصادية والمالية في كتاب (صحيح ابن حبان) توفي 354هـ

اسم المؤلف: ورقاء يونس يحيى الطائي
اسم المشرف: حمدان عبد المجيد محمد الكبيسي
الموضوع العام: التاريخ
السنة: 2015
الموضوع الدقيق: التاريخ الاسلامي
الدرجة: دكتوراه
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:

تاثير اضافة مادة البايركس على بعض الخصائص الفيزيائية لمادة البورسيلن Influence of Pyrex Addition on Some Physical Properties of Porcelain Material

اسم المؤلف: عمر عدنان جاسم
اسم المشرف: كريم علي جاسم سوسن عبد الحسين مهدي
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: This study was carried out to prepare a porcelain samples of raw material 50 wt % kaolin dukhla, 25 wt % erzma sand glass and 25 wt% feldspar, boro silicate glass (Pyrex) used as a flux in the porcelain (ceramic) body, instead of feldspar, yielding a new material which has new properties with grain size equal to 53μ.Pyrex which was added to the porcelain to get the mixtures of sample. The all mixtures prepared and 10 wt % of distilled water was added, the resulting blends were die pressed of 25 MPa, to produce specimens with diameter of 25 mm and thickness of 5 mm, then they were dried and sintered for different temperatures (1200, 1250, and 1300) C° for 1 hour in an electric furnace. Physical properties measurements such as density, porosity, water absorption and length shrinkage percentage, were carried out, also mechanical properties (compression strength) and thermal properties. (Thermal conductivity and heat capacity) were measured The result of the physical properties measurement are found to be improved at increasing the ratio of Pyrex mixture, such as increase in density and shrinkage which a company with the decrease of porosity and water absorption, also the same changes were happened for these properties with increasing sintering temperature for all mixtures, and the highest increment in shrinkage have been shown at 1250 C°.The thermal conductivity and heat capacity have increased the ratio of Pyrex mixture, and there are small increment in these measurements, at increasing temperature for mixtures 3 and 4, but the increment is high for mixture no. (2).The results of mechanical properties measurements (diametrical strength) are found to be improved and increased at the increase of the ratio of Pyrex mixture and the mixture no. (3) have a highest strength. Also this improvement and increment in strength was continued for mixtures 2 and 3, with the increase of the sintering temperature whereas decreases for mixture (4) improvement in physical and mechanical properties for a new porcelain make suit usage in brick walls industry (porcelain tiles).

تاثير اضافة Al2O على الخصائص الكهربائية للفارستور من نوع ZnO The Effect of (Al2O3) Additive on Electrical Properties of (ZnO) - Based Varistor

اسم المؤلف: عباس فاضل شنون
اسم المشرف: ايسر جمعة ابراهيم
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ZnO based varistor samples having composition formela as shown below : - (X) is a variable take values (X = 0 , 0.1 , 0.5 , 1) % mol were prepared by a solid state reaction and sintered in air at a different sintering temperatures (1000,1100 and 1200)ᴼC for 2h by a heating rate of (5ᴼC. min - 1). The microstructure and electrical properties of sintered samples were investigated by using X - ray diffraction (XRD), energy dispersive spectroscopy (EDX), scanning electron microscopy (SEM), as well as electrical meas urements. XRD analyses showed that the crystallite size was decreased with the increase of Al2O3 concentration while it was increased with the increase of sintering temperature. Also from SEM images and by using linear intercept method we note that the grain size decreases with the increase of Al2O3 concentration while it increases with the increase of sintering temperature. Since the breakdown voltage is influenced by the size and the number of grains , so it was increased with the increase of Al2O3 concentration at certain sintering temperature to reach (2220V) at sample contains (1% of Al2O3) and sintered at 1000ᴼC for 2h, this is due to form a spinal phase (ZnAl2O4) which inhibits the grain growth.Also the breakdown voltage was decreased with the increase of sintering temperature at certain Al2O3 concentration to reach (255V) at sample sintered at 1200ᴼC for 2h and contains (0.1% l of Al2O3).By plotting the (J - E) curves of varistor samples we can notes that the adding of (0.1 and 0.5) % of Al2O3 dopants enhances the nonlinear behavior of ZnO varistor by increasing the nonlinear coefficient to reach its maximum values (46, 48) respectively which are sintered at 1000ᴼC for 2h, while the increase of Al2O3 concentration to(1% ) decreases the nonlinear coefficient to (29.2) which are sintered at 1000ᴼC for 2h .Compound ZnO Bi2O3 Sb2O3 CoO MnO2 Cr2O3 Al2O3 % mol 96.5 - X 0.7 1 0.8 0.5 0.5 X The increase of sintering temperature decreases the nonlinear coefficient to reach its minimum values (6.9, 8) at samples sintered at 1200ᴼC for 2h and contain a different amounts of Al2O3 concentration, this is due to the bad volatilization of bismuth that insured by (EDX) test.The leakage current was increased with the increase of both Al2O3 concentration and sintering temperature to reach its maximum value (0.33mA) at a sample which contains (1% ) of Al2O3 concentration and sintered at 1200ᴼC for 2h, that is because the Aluminum increases the free electrons (donor density ) at the conduction band.Deilectric constant decreases with the increase of the frequancy of the applied voltage for the samples which containe 0.1% of Al2O3 and sintered at (1000 and 1200)ᴼC for 2h and for the sample contain 1% of Al2O3 and sintered at 1000ᴼC, the deilectric constant decreases with the increase of sintering temperature while tangent factor increases with the increase of Al2O3 concentration, this is due to the increase of leakage current.

دراسة نظريه للاستطارة الالكترونيت للنوى 59Co, 61Ni, 63Cu , 65Cu Theoretical Study of Electron scattering from 59Co, 61Ni, 63Cu and 65Cu nuclei

اسم المؤلف: ياسمين حسن كاظم
اسم المشرف: الطاف عبد المجيد الرحماني
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: فيزياء الالكترونيات
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The nucleon momentum distributions NMD and the elastic longitudinal form factors F(q) for the electron scattering of the ground state for some odd mass nuclei in the 1f - 2p shell, such as 59Co, 61Ni, 63Cu and 65Cu have been derived and calculated by using the Coherent Density Fluctuation Model CDFM and expressed in terms of the fluctuation function (weight function)| . The fluctuation function has been related to the nucleon density distributions NDD of the nuclei and determined from the theoretical and the experimental results. The property of the long - tail manner at the high momentum region of the nucleon momentum distributions has been obtained by both the theoretical and experimental fluctuation functions on contrary to the results of the nucleon momentum distributions derived and calculated in the shell model by taking Fourier transform to the harmonic - oscillator wave functions that are mainly characterized by the steep slope behavior at high momentum values. The experimental form factors of all nuclei under study are in reasonable reproduced by the present calculations for all the values of momentum transfer .

السليكون العشوائي للثنائي الباعث للضوء من النقاط الكميه Amorphous silicon Light Emitting Diode Quantum Dots

اسم المؤلف: ولاء خليل جميل خليل
اسم المشرف: موفق كاظم عبد الرضا
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الدراسة استخدمت الحسابات النظرية لنبيطة ثنائي الباعث للضوء للنقاط الكميه من السيليكون العشوائي. وعن طريق هذه الحسابات فقد تبنينا فكرة التقيد الكمي. وقد وجد ان الانبعاث الكمي الضوئي يظهر اعتمادا مهما لحجم النقاط الكمية والتي تتراوح من (١ - ٤) نانومتر. ان الكفاءة الكمية الداخلية تتاثر بدرجة الحرارة حيث تكون اكثر كفاءة عند درجة حرارة الغرفة. يمكن لفجوة الطاقة ان تتناغم وفقا للتحكم بحجم النقاط الكمية من السليكون العشوائي. وقد اظهرت النتائج الازاحة نحو الطاقا العاليه في تاثير حالة التقييد الكمي, لهيكل النقاط الكمية للسيليكون العشوائي. وهذا التقييد الكمي يجعل السليكون مرشح للعرض بكامل الوان الطيف البصري. مما يقودنا هذا السلوك البصري الى تفسير تغير مادة النقاط الكمية للسيليكون العشوائي لتصبح مادة ذات فجوة حزمية مباشرة بعد ان كانت غير مباشرة في طبيعتها الحجمية. تمت دراسة الكفاءة الكمية الداخلية بوصفها دالة الى الطول الموجي وتيار الحقن. لقد وجدنا ان النتائج المستحصلة متفقه اتفاقا جيدا مع النتائج التجريبية المنشورة. لذا, فاننا نؤكد على ان مادة النقاط الكمية من السليكون العشوائي هي خيار واعد لنبائط انبعاث الضوء المرئي والقابلة للتناغم الطاقي وذات انجازية عاليه | In this work, theoretical calculations were used by considering the amorphous silicon quantum dots light emitting diode (a - SiQDs LED) as the device of investigation. By these calculations, the effect of quantum confinement was a doped. It is found that the light emission shows significant size dependence in the range (1 - 4) nm of the quantum dots. The internal quantum efficiency is affected by temperature and it is more efficient at room temperature. The energy gap can be tuned by controlling the size of a - SiQDs. The blue shift is attributed to quantum confinement effect in a - SiQDs structure, where quantum confinements make silicon like candidate for full - color display. It led to the interpretation that the a - SiQDs material has been changed to be a direct band gap material. Internal quantum efficiency as a function of wavelength and injection current has been studied. It is found that the obtained results are in good agreement with the experimental published data. Therefore, a - SiQDs material was asserted to be a promising candidate for visible, tunable and high performance light emitting devices.

تحضير ودراسة خواص الخلية الشمسية المفعلة بالصبغه بطريقة الترسيب بالليزر النبضي Preparation and Characteristics Study of Dye Synthesized Solar Cell by Pulsed Laser Deposition

اسم المؤلف: وسن جبار طاهر
اسم المشرف: سمر يونس الدباغ سؤدد سلمان احمد
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: دكتوراه
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: هذا العمل يركز على تصنيع الخلايا الشمسية المفعلة بالصبغه باستخدام مادة شبه موصله من نوع P بدل من استخدام السائل لغرض معالجة بعض المشاكل منها معالجة التسرب في السائل المستخدم. الى جانب ذلك، فقد تم دراسة وتحضير المواد النانوية التي تلعب دورا هاما في اداء هذا النوع من الخلايا الشمسية, حيث ان هذه المواد القابليه على تحقيق كفاءة تحويل عالية مع الحفاظ على البساطة والكلفة المنخفضة. تتكون الخليه الشمسيه من (ITO/ TiO2 or ZnO /Ru /CuI/ Ag) حيث تم ترسيب المواد النانويه المستخدمه في هذا العمل بواسطة استخدام تقنية الترسيب بالليزر النبضي. واجريت الفحوصات التركيبيه والبصرية والكهربائية لجميع المواد النانويه المستخدمه في تحضير الخليه الشمسيه وكذلك دراسة تاثير عدد نبضات الليزر نيديميوم, التلدين وكفاءة الخليه الشمسيه : - تم فحص اغشية اوكسيد التيتانيوم واوكسيد الزنك النانويه بواسطة حيود الاشعه السينية (XRD) وجد ان تركيبها يتغير من العشوائي الى متعدد التبلور عند التلدين بدرجة حرارة o C450 . اما اغشية ايوديد النحاس فكانت متعددة التبلور بدرجة حرارة الغرفه.اظهرت دراسة طبوغرافية السطح لجميع الاغشية المحضرة بان حجم الحبيبات يزداد وكذلك خشونة السطح تزداد بزيادة عدد نبضات الليزر المسلطه وكذلك زيادة درجة الحرارة.من خلال فحص الخصائص البصريه لجميع الاغشية المحضره وجد ان الامتصاصية تزداد بزيادة عدد نبضات الليزر وكذالك عند زيادة درجة الحرارة.قياسات هول اثبتت ان اغشية اكسيد التيتانيوم واكسيد الزنك هي من نوع n - type بينما اغشية ايوديد النحاس فهي من نوع p - type . تم ملاحظة ان كثافة حاملات الشحنه تزداد وتحركيه هول تقل بوضوح مع زيادة عدد نبضات الليزر.تم تصنيع القطب الضوئي للخلايا الشمسيه المفعلة بالصبغه من مادة اوكسيد التيتانيوم واوكسيد الزنك النانويه, حيث لوحظ في حالة وجود اوكسيد التيتانيوم او اكسيد الزنك فان القطب الضوئي يعتمد على زيادة عدد النبضات وبالتالي اعتماد كفاءة الخليه الشمسية على عدد النبضات بسبب زيادة السمك, حيث لوحظ عندما كان عدد النبضات المسلطة 200 نبضه فان كفاءة الخليه الشمسيه كانت %2.115) ) وعندمزااد عدد النبضات الى 800 نبضه زادت كذالك كفاءة الخليه الشمسيه الى ( 5.654%) . ان مادة اوكسيد التيتانيوم هي افضل من اوكسيد الزنك حيث كانت كفاءة الخليه في حالة استخدام مادة التيتانيوم اعلى من كفاءة الخليه في حالة استخدام مادة اوكسيد الزنك حيث لوحظ عند استخدام 800 نبضه بلغت كفاءة الخلية الشمسية الى 5.654% في حالة استخدام مادة اوكسيد التيتانيوم ولكن انخفضت الكفاءة الى 4.231% عند استخدام مادة اوكسيد الزنك. وايضا تم وضع مادة ايوديد النحاس مع اوكسيد التيتانيوم ومع اوكسيد الزنك وكان اوكسيد التيتانيوم افضل من اوكسيد لزنك نتيجة لزيادة الكفاءة. | In a solid state dye - sensitized solar cell the electrolyte is replaced by a p - type semiconductor avoiding problems of leakage of liquid electrolytes. During this work the solar blend from (ITO / TiO2 or ZnO/ Ru / CuI / Ag) is fabricated. The thin films were prepared by pulse laser deposition (PLD) technique and deposited on (ITO) glass substrate. The structural, optical and electrical properties of all samples where studied. XRD analysis indicated that the structure of TiO2 and ZnO thin film change from amorphous to polycrystalline if annealed to 450 Co . XRD analysis shows the CuI at room temperature is polycrystalline. The morphology of surface, found the grain size and roughness of TiO2, ZnO and CuI thin film increase as the number of Nd : YAG laser pulse and temperature increased. Optical properties investigation of TiO2, ZnO and CuI thin film showed that as the number of Nd : YAG laser pulse and temperature increase that lead to increase in absorption. Hall effect measurement prove that TiO2 and ZnO are N - type while CuI is P - type semiconductor, as the number of Nd : YAG laser pulses and temperature increase the carrier concentration nH increase while the mobility µH decrease. The I - V characteristics of the fabricated solar cell is measure , it can be noticed that the photocurrent collected from the TiO2 or ZnO is depending on the number of pulses. The increase in the number of the pulses resulting increase in the photocurrent, indicating the dependence of current collection efficiency on number of pulses. In the same material (TiO2) can be noted the number of pulses equal to 200 the conversion efficiency equal to 2.115 % while increase number of pulse to 800 pulse the conversion efficiency increase up to the 5.654 % from this value it can be observed the conversion efficiency increases when the number of the pulses increasing. Also when using ZnO material it observed that the conversion efficiency depend on the number of pulses when the number of pulses equal to 200 the conversion efficiency equal to 1.144 % while increasing the number of the pulses to 800 pulse the conversion efficiency increase up to the 4.231%, as well as when use TiO2 the efficiency increase more than the with use the ZnO. It can be observed that the use of CuI in solar cell the efficiency depend on the number of pulses , increase with increasing number of pulses. I - V parameter of the solar cell with different number of pulse for CuI thin film, can be observe when use the CuI with TiO2the conversion efficiency is higher from the use CuI with ZnO, the value of conversion efficiency when use CuI with TiO2 at 800 pulses up to rage 5.192%, while when use CuI with ZnO the value of conversion efficiency at 800 pulse equal to 3.654% from this value can be conclusion the efficiency of the TiO2 is up from the efficiency of ZnO

مقارنة نظرية بين HgCdTe وAlGaAs لنظامي البئر الكمي الليزري ذو التركيبين غير المتجانسين Theoretical Comparison between HgCdTe and AlGaAs Heterostructure Quantum Well Laser Systems

اسم المؤلف: وديان كاظم عبد الزبيدي
اسم المشرف: ابتسام محمد تقي سلمان
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: هذا البحث يصف مقارنة نظرية بين نظامي ولليزر البئر الكمي ذو التركيب غير المتجانس. حيث تم دراسة تاثير العوامل المختلفة لهذا التركيب مثل عرض البئر وعرض الحاجز للبئر الكمي المفرد والمتعدد على عوامل الليزرمثل عامل التقيد البصري وتيار العتبة وكثافة تيار العتبة والربح البصري وقدرة الخرج والكفاءة . بالاضافة الى دراسة كثافة الحالات للبئر الكمي.افضل قيمة لعامل التقييد البصري (0.308) للتركيب ذو ثلاثة ابار كمية و(W=21.5nm) و(0.0224) للتركيب ذو خمسة ابار كمية و(W=11.3nm). عامل التقيد له تحسن كبير في التركيب المتعدد الابار افضل من التركيب ذو البئر الكمي المفرد . واظهرت النتائج ان عامل التقييد للتركيب المتعدد الابار اكبر منه للبئر الكمي المنفرد بمقدار 18 مرة للتركيب وبمقدار 25 مرة للتركيب . هذا التحقيق لتحسين عمل نبيطة الليزر دايود من خلال تاثير عامل التقييد البصري على الربح وتيار العتبة والقدرة الخارجة والكفاءة تحت الانحياز الامامي في المنطقه الفعالة، كانت كثافة تيار العتبة ووكفاءة (89% ل و97% لـ ) | This work is description of theoretical comparison between two systems and for heterostructure quantum well laser. Where studied the effects of the variation parameters for this structure such as a well width, barrier width for Single and Multi - Quantum Well, on laser parameters such as optical confinement factor, threshold current, threshold current density, optical gain, output power and efficiency. In addition we studied the density of states for quantum well.The optical confinement factor has the best value (0.308) for 3QWs at (W=21.5nm) and (0.0224) for 5QWs at (W=11.3nm). It introduced a significant improvement in MQW is much higher than SQW for two systems. The results showed that optical confinement factor of 3QW are much higher (by a factor 18) for and (by a factor 25) for 5QW, from optical confinement factor of SQW. This investigated for improve the work of laser diode device through the effect of optical confinement factor on the gain, threshold current, output power and efficiency under forward bias in active region, where threshold current density , with efficiency (89%for and 97% for )

تحضير ودراسة الخواص الطيفيه الى الوسط الليزري الفعال Er : TiO باستخدام تقانة الصول - جل Preparation and Study of the Spectroscopic Properties of Er : TiO2 Laser Active Medium using Sol - Gel Technique

اسم المؤلف: هناء محمد ياسين
اسم المشرف: صباح نوري مزهر بسام غالب رشيد
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: دكتوراه
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ions Doped nano particular titanium dioxide was prepared via sol - gel method under varying conditions (with doping rates equal to 1.24%wt, 2.65%wt, 3.78%wt, 5.05%wt and 6.31%wt). The structure, morphological and spectroscopic properties of prepared doped samples were investigated by a variety of techniques, including XRD, AFM , UV - Visible spectroscopy and photoluminescence spectroscopy.XRD analysis shows that TiO2 prepared samples have amorphous structure turn to polycrystalline anatase structure after annealing process. The lattice constant parameters 'a' and 'c' of the tetragonal lattice anatase TiO2 powder has been calculated; the results showed that the value of 'a' remains essentially unchanged, while the lattice constant 'c' have slightly increased at lower doping rate then become stable at higher doping rate. This is due to a combination of interstitial and substitutional accommodation of the dopant ions.The FTIR spectra for pure and doped samples after annealing process show a single transition peak at wave number around 1200cm - 1 and 1102 cm - 1 respectively. The wavelength of high transition rate of this peak depends on Er3+ concentrations. By Comparing with wavelength of high transition rate of pure TiO2 sample, slightly peak wavelength increments shift occur with increment of doping concentration rate. FTIR spectra give a good indication in direction of synthesis of optical band - pass filter at a wavelength around 9.07μm (~1102 cm - 1).Judd - Ofelt analysis is performed to calculate the three Judd - ofelt of parameters; Ω2, Ω4 and Ω6. From the absorption spectra, the radiative transition probabilities A(J;J’), radiative lifetime τrad and fluorescence branching ratioare calculated for each excited upper manifolds states of Er3+ .A photoluminescence peaks was recorded at wavelength around to 498nm, 533nm and 1533 nm. The emission cross - section σem for prepared samples are calculated. It was founds that sample with doping rate 5.05%wt have high σem values in compares with other samples, and it’s value is close to those value of Er : Glass.According to the spectroscopic properties of doped samples, it could be concluded that Er : TiO2 has the potential to be a laser mat

دراسة نظرية للاستطارة الالكترونية المرنة من بعض النوى الفردية A Theoretical study of Elastic Electron Scattering for some odd nuclei

اسم المؤلف: هدى عبد الجبار حسين
اسم المشرف: الطاف عبد المجيد الرحماني
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: فيزياء الالكترونيات
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: حسب كــل من توزيع كثافة الشحنة النووية وعوامل التشكل لاستطارة الالكترون المرنة للحالة الارضية للنوى الفردية ( 25Mg , 27Al, 29Si 19F بالاضافة الى 31P) الواقعة ضمن القشرة النووية 2s - 1d بالاعتماد على كل من اعداد الاشغال للحالات النووية والدوال الموجية لجهد المتذبذب التوافقــي ذي معلمات حجمية اختيرت لكي تعيد انتاج جذر مربع متوسط انصاف اقطار الشحنة لجميع النوى. وقد وجد ان ادخال المعلمات الاضافية ( وو ) التي تعكس الفرق بين اعداد الاشغال للحالات النووية قيد الدراسة وبين تلك التي يتنبا بها انموذج القشرة النووية يؤدي الى توافق بين النتائج المحسوبة والنتائج العملية لتوزيع كثافه الشحنة النووية لكل قيم المسافة (r). كما تبين لنا ان عوامل التشكل الطولية لاستطارة الالكترون المرنة النظرية تتفق مع النتائج العملية للنوى (,25Mg , 27Al, 29Si 19F بالاضافة الى 31P) كما تم حساب الفرق بين كثافة الشحنة الالكترونية لكــل من ( 24Mg , 25Mg) و28Si , 29Si)) لتوضيح تاثير اضافــة النيوترونات على كثافة الشحنة النووية لكل من النظائر السابقـــة. | The charge density distributions (CDD) and the elastic electron scattering form factors F(q) of the ground state for some light odd mass nuclei in the 2s - 1d shell , , , and nuclei have been calculated. This has been based on the use of occupation numbers of the states and the single particle wave functions of the harmonic oscillator potential with size parameters that have been chosen to reproduce the observed root mean square charge radii for all considered nuclei. It is found that introducing additional parameters, namely and which reflect the difference of the occupation numbers of the states from the prediction of the simple shell model leads to a remarkable agreement between the calculated and experimental results of the charge density distributions throughout the whole range of (r). The elastic electron scattering form factor throughout all values of momentum transfer are in reasonable agreement with the experimental electron scattering form factors for , , , and nuclei. The difference of the CDD of ( - ) and ( - ) isotopes has been calculated to clarify the influence of the additional neutron on the CDD

دراسة نظرية لطيف مستويات الطاقة الواطئة ولنوى خفيفة باستعمال انموذج القشرة النووي 3016S14,3014Si16,188Ne10 Theoretical Study Of Low Lying Spectrum For Light Nuclei By Using Nuclear Shell Model 3016S14,3014Si16,188Ne10

اسم المؤلف: هدى بطرس بهنام مقادسي
اسم المشرف: هادي جبار مجبل العكيلي
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ان طاقات الربط والتهيج حسبت لنوى (_8^18)Ne_10 , (_16^30)S_14 , (_14^30)Si_16 وللمستويات الدنيا باستعمال حسابات انموذج القشرة النووي ولبروتونين في القشرة S,dلنوى (_16^30)S_14 بينما لنيوترونين لنواة (_14^30)Si_(16 ) ,(_8^18)Ne_10 ولمدارات خارج القلب المغلق .عناصر مصفوفة التفاعل تم الحصول عليها من خلال استخدام جهد تفاعل USD,USDA ,USDBنتائج الحسابات النظرية لطاقات الربط والتهيج والمحسوبة باستعمال عناصر المصفوفة النظرية اظهرت تطابقا مع النتائج العملية .حسابات انموذج القشرة استعملت لفهم ودراسة خصائص المستويات الدنيا ولعدد الكتلة لنوى A=18,30 .استعمل القلب المغلق مع التفاعل المتبقي للجسمين ما بين النكليونات الخارجية O8816 ,14 14Si28 .لحالات التماثل الموجبة فان جميع التشكيلات لقشرة S,d اخذت بالحساب باعتبار ان هناك قشرة مغلقة مع جسيمين في مستويات القشرة .S,dتفاعل الجسمين الفعال للنوى اختير على اساس جهد USD,USDA,USDB .اظهرت قيم طاقات الربط والتهيج تطابق جيد مع القيم العملية .واعتبرت الجهود USD,USDA,USDB هي المدخلات الاساسية لحساب الطاقات النووية والتي تتضمن تفاعل نكليون - نكليون .الحسابات اظهرت لنا امكانية اكبر لفضاء تفاعل النكليونات كون طاقات الحالات الارضية متقاربة . | Binding and excitation energies have been calculated at low lying levels for (_8^18)Ne_10 , (_16^30)S_14 and (_14^30)Si_16 nuclei using shell - model calculation with two protons in the S - d shell for (_8^18)Ne_10 , and (_16^30)S_14 while two neutrons for (_14^30)Si_16 in orbits outside the closed core. The effective two - body matrix elements are obtained from the USDA, USDB and (USD) potential interaction. Results of calculated binding and excitation energies are show a good agreement with experimental data with calculated by using theoretical matrix elements . The shell model calculation is used to investigate properties of levels at low lying in the mass number of nuclei A =18 and 30. An inert core with a residual two - particle interaction between the outer nucleons of (_8^16)O_8 , and (_14^28)Si_14 as summed. For the positive parity states all configurations in the s - d shell are taken into account are described by a closed shell, two nucleons in the S - d shell . The effective two - particle interaction is chosen to be a described by the USD,USDA ,and USDB potential. Good agreement with experiment is obtained for the binding and excitation energies. It is considered USDA , USDB and USD potential for two - body matrix element interaction as the most input parameters to the calculation is the nuclear energies, which contains realistic two (N - N) interactions. Provided the calculation is performed in a large enough basis space, the ground - state energy will converge

تصنيع ودراسة خصائص كاشف ضوئي وخلية شمسية لاغشية CuO الرقيقة Fabrication and Study Properties Photodetector and solar cell CuO Thin film

اسم المؤلف: هبة ممتاز علي
اسم المشرف: سمير عطا مكي
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الاغشية الرقيقة
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا البحث , تم تصنيع كاشف ضوئي وخلية شمسية من مادة اوكسيد النحاس CuO)) ثم دراسة خصائصه والمحضرة من ترسيب اغشية (CuO) النقية ,وبسمك مختلف 400,350,300,250) nm) بطريقة التبخير الحراري في الفراغ اذ تم تحضير هذه الاغشية بترسيب معدن النحاس النقي (Cu) على قواعد زجاجية وسيليكونية بدرجة حرارة الغرفة (300)K، ومن ثم اكسدة هذه الاغشية المحضرة بدرجة حرارة (300)ºC لمدة ساعة كاملة بوجود تدفق الهواء. اظهرت نتائج فحوصات حيود الاشعة السينية (XRD) ومجهر القوة الذرية (AFM) ان جميع الاغشية المحضرة من النوع متعدد التبلور وذات اتجاهية (111) , (1 ̅11) ان الحجم الحبيبي متجانس ومنتظم ومعدل خشونة السطح RMS)) يزداد بزيادة السمك . عند اجراء قياسات الخواص البصرية تبين ان لاغشية (CuO) امتصاصية عالية في مدى الاطوال الموجية للمنطقة المرئية nm(700 - 400), ان كلتا قيمتي النفاذية وفجوة الطاقة يتناقصان من (1.8 - 1.4 eV) بالاعتماد على زيادة السمك للاغشية المحضرة.اظهرت القياسات الكهربائية للاغشية المحضرة تغير المقاومية الكهربائية كدالة لتغير درجة الحرارة ضمن المدى الحراري (303 - 423)K ، حيث التوصيلية تزداد بزيادة كل من درجة الحرارة والسمك وتبين من خلال قياسات تاثير هول ان نوع التوصيلية لاغشية مادة CuO من النوع الموجب - القابل (p - type), , تزداد تركيز حاملات الشحنة وتقل التحركية بازدياد السمك. اظهرت نتائج قياسات (تيار - جهد) في حالة الظلام للكاشف الضوئي المحضر تم حساب عامل المثالية للكواشف المصنعة اذ وجدنا انها تزداد بزيادة السمك , اذ بلغ اقل قيمة له (3.431) عند سمك nm (300), وجدنا ان الاستجابة الطيفية للكواشف المصنعة تعمل ضمن المنطقة الطيفية (400 - 900)nm مع وجود قمتين للكاشف ( - CuO/n - Sip) ، تظهر القمة الاولى عند الطول الموجي (688)nmاي ضمن منطقة المدى المرئي من الطيف الكهرومغناطيسي , والقمة الثانية عند الطول الموجي (810)nm اي ضمن منطقة مدى الاشعة تحت الحمراء القريبة, وكذلك الحال لبقية الكواشف المصنعة مع حدوث ازاحة طيفية في قمة الاستجابة الاولى ضمن المنطقة المرئية عند زيادة السمك . ولوحظ ان افضل نتائج الكواشف الضوئية المحضرة كانت عند سمك nm(300) حيث بلغت اعلى قيمة للاستجابة الطيفية 0.68)A/W), والكشفية النوعية كانت بحدود 1012 6.808)cm.Hz1/2.W - 1) عند الطول الموجي nm(708)، واعلى زمن فترة حياة الحاملات μ sec (10) , والتي تم الحصول عليها عند درجة حرارة الغرفة .في هذا البحث تم تصنيع خلية شمسية من المفرق الهجين (p - CuO/n - Si) المحضر من ترسيب اغشية ( (CuOالمحضرة بسمك مختلف بطريقة التبخير الحراري في الفراغ على قواعد سيليكونية احادية البلورة باتجاهية (111) من النوع (p - type) كما اظهرت خصائص (تيار الدائرة القصيرة وفولتية الدائرة القصيرة ) في حالة الاضاءة ان الخلية الشمسية ذات سمك nm((300 تمتلك اعلى قيم للكفاءة مقارنة بقية الخلايا الشمسية الاخرى ، اذ بلغت الكفاءة التحويلية (η=5.9%) في حالة الظلام, ان المفرق المصنع هو من النوع الحاد، ولوحظ تناقص السعة بزيادة كل من جهد الانحياز العكسي والسمك في حين يزداد عرض منطقة النضوب وقيمة جهد البناء الداخلي بزيادة السمك | In this research photodetector and solar cell fabrication from copper oxides (CuO) its properties were studied, which prepared by deposition CuO at different thickness (250,300,350 and 400)nm via thermal evaporation under vacuum method These films have been prepared by (Cu) Pure metal was deposited on glass and silicon substrate in room temperature (300K) and then oxidation prepared (Cu) films at temperature (300)ºC for one hour with exist air flow. The XRD investigation showed that all the films and atomic force microscopy properties (AFM), that all prepared films are polycrystalline with preferred orientation along (1 ̅11),(111) plane for all films that grain size all the films were homogeneous and smooth and root mean square )RMS) rise increases thickness.The optical measurements showed that the thin films (CuO) high absorbency over the visible region wavelength of (400 - 900)nm ,transmission and the optical energy band gap decrease from (1.8 - 1.4) eV with the increase thin film thickness.The electrical measurements showed variation of the resistivity as a function of temperature in the range (303 - 503)K ,The results showed that increasing in electrical conductivity with increasing both temperature and thickness , observe the Hall effect were (n - type) semiconductor and , also the value of Hall coefficient increasing thickness with increasing the increasing concentration and decrease mobility increasing thickness.The I - V characteristics measurements showed of prepared detectors under dark calculate the ideality factor detectors fabricated find increasing with increasing thickness then value less (3.431) on thickness (300nm) ,found the detectors fabricated showed a range of spectral responsively between (400 - 900) nm with two peaks (p - CuO/n - Si) one peak at (688)nm wavelength - visible region, while the second peak at (810)nm wavelength - IR region The same response for the detectors fabricated with wavelength shifted in the first peak response within IR region and The response time increase with increase thickness The good result of the spectral responsively found at thickness (300)nm which has a peak response about (0.68) A/W and a specific detectivity of )6.808) cm.Hz1/2.W - 11012at (861) nm wavelength with Maximum carrier life time which thickness (300)nm about (10) µ sec obtained at room temperature In this research was solar cell fabricated from (p - CuO/n - Si) heterojunction which prepared from deposited films by using thermal evaporation technique from (CuO) with different thickness, and different (p - type) single crystal silicon substrate with orientation (111). All illumination and (Short Circuit Current and Open Circuit Voltage) characteristics measurements showed solar cell with (300)nm thickness have higher efficiency among other cells, the efficiency (η) value from (η =5.9%) that the heterojunction is abrupt. The capacitance decreases with increasing reverse bias voltage, also with increasing thickness.The width of depletion layer and the value of built - in potential increases with increasing of thickness

دراسة تاثير استبدال (Y2O3,Sb2O3,SrO) على الخصائص التركيبية والكهربائية للمركب فائق التوصيل HgBa2Ca2Cu3O8 Study the effect of (Y2O3,Sb2O3,SrO) substatution on the structural and electrical properties of the HgBa2Ca2Cu3O8+? superconductor compound

اسم المؤلف: نور قاسم فاضل
اسم المشرف: كريم علي جاسم
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تتضمن الدراسة تاثير الاضافات (SrO or Y2O3 or Sb2O3) على الخواص التركيبية والكهربائيه للمركب الفائق التوصيل . [Hg 1223] تم حضير النماذج الاتيه HgBa2 - xSbxCa2Cu3O8+δ) وHgBa2 - xYxCa2Cu3O8+δو (HgBa2 - xSrxCa2Cu3O8+δ ولقيم x=0, 0.1, 0.2, 0.3 بطريقه تفاعل الحاله الصلبة.وقد درس الخصائص التركب البلوري باستخدام حيود الاشعة السينية ( XRD ) واظهرتحليل حيود الاشعة السينية ان جميع العينات ذات تركيب (tetragonal) تحوي على اطوارتركيبه فائقه التوصيل منخفضة (1212و1201) وعالية (1223) , وان النسب الطوريه ) نسبه الطورالعالي 1223) تزداد عند الاستبدال. كذلك وجد بان قيمة الثابت الشبيكة (c) يقل عند استبدال (SrO or Y2O3 or Sb2O3) في موقع الباريوم.حيث ان قيمه ثابت الشبيكه c للمركب HgBa2 - x(Sr or Sb or Y)x Ca2Cu3O8+δ ل x=0 هي c=15.75 ,في حين عند استبدال Srتنخفض قيمه ثابت الشبيكه cالى c=15.3510 (x=0.1), 15.3811 (x=0.2), 15.4431 (x=0.3),كذلك تنخفض قيمه ثابت c عند استبدال Sbالى 15.3417 (x=0.1), 15.4274 (0.2), 15.4432 (x=0.3).عند استبدال Yتنخفض قيمه ثابت الشبيكه cالى15.353 (x=0.1), 15.397 (0.2), 15.473 (x=0.3). . لحساب درجه الحراره الحرجه تم دراسة المقاوميه الكهربائيه باستخدام تقنيه القطاب الاربعة, حيث وجد ان درجه الحرارة الحرجه تزاد عند استبدال SrO وY2O3 وSb2O في موقع الباريوم وان اعلى درجه حرارة حرجة تم الحصول عليها عند استبدال Srوهي 138 كلفن. في درجة حرارة الغرفة تم قياس ثابت العزل الكهربائي كداله للتردد في المدى (Hz50 - 1MHZ), قد وجد ان ثابت العزل الكهربائي للتردد HZ 50 هو 45.489، بينما عند استبدال (Sr)ينخفض ثابت العزل الكهربائي الى 45.1715 (x=0.1)، 24،2123 (0.2x=) ,16.82781313 (x=0.3)، وانخفض ايضا ثابت العزل الكهربائي عند استبدال (Sb) الى 12،708 (x=0.1)، 10.339 (0.2x=) ,10.816 (x=0.3) لكن عند استبدال (Y) ثابت العزل الكهربائي يزداد الى 63.3682 (x=0.1) الى 26،378 (x=0.3). | The present thesis includes effect of (SrO, Y2O3 and Sb2O3) substatution on the structural and electrical properties of the [ Hg - 1223] compounds. Which have prepared the superconducting compounds HgBa2Ca2Cu3O8+δ ,HgBa2 - xYxCa2Cu3O8+δ, HgBa2 - xSbxCa2Cu3O8+δ and HgBa2 - xSrxCa2Cu3O8+δ (x=0.1,0.2,0.3) by useing Solid state reaction method. The crystal structures for all the specimen have been determined by of X - ray diffraction. Shows the XRD that all specimen have tetragonal structures correspond to the high [ Hg - 1223] and low - phase[ Hg - 1201 and Hg - 1212], and there is a decrease in c - parameter value when substituted of (Sb2O3 or SrO or Y2O3) in Barium site, where that c - parameter value of HgBa2 - x(Sr or Sb)x Ca2Cu3O8+δ for x= 0 is c=15.75, while at substatution (Sr) decreased c - parameter value to c=15.3510 (x=0.1), 15.3811 (x=0.2), 15.4431 (x=0.3), also decreased c - parameter value at substatution (Sb) to 15.3417 (x=0.1) , 15.4274 (0.2) and 15.4432 (x=0.3), at substatution (Y) decreased c - parameter value to 15.353 (x=0.1) , 15.397 (0.2) and 15.473 (x=0.3). while the volume fraction of the high - Tc phase increased with the increase of (Sb2O3 or SrO or Y2O3) content. Electrical resistivity was used to find the critical temperature using the four - probe technique, found that transition temperature which it increased when substituted (Sb2O3 or SrO or Y2O3), and we get a highest critical temperature is 138k. The dielectric constant have been measured and is a function of applied frequencies ( range of 50 Hz to 1MHz) at room temperature HgBa2 - x(Sr or Sb)x Ca2Cu3O8+δ for x= 0. It was found that the dielectric constant of at the frequency 50Hz is 45.489 , while at addition(Sr) decreased dielectric constant are 45.1715 (x=0.1) , 24.2123(0.2) and 16.82781313 (x=0.3),also decreased dielectric constant at addition(Sb) to 12.708 (x=0.1) , 10.339(0.2) and 10.816 (x=0.3).but when addition(Y) dielectric constant increasing are 63.3682 (x=0.1) to 26.378 (x=0.3). It was found that dielectric loss factor (tan) of all specimens decreased with the increase of frequency.

دراسة خصائص التفاعل النووي (?,n) للنوى الفردية - الزوجية Z?29) ? 21) Studying the Properties of Nuclear Reaction (?,n) for Odd - even Nucleus (21?Z?29)

اسم المؤلف: نور عادل محمد
اسم المشرف: فاطمة عبد الامير سميرة احمد
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: الدراسة الحالية تركزت على دراسة الخواص النووية للتفاعل النووي (الفا, نيوترون ) لنويات الهدف ذات الاعداد الذرية الفردية وللتفاعلات ( (_21^45)Sc(α,n)(_23^48)V, (_23^51)V (α,n) (_25^54)Mn , (_25^55)Mn(α,n)(_27^58)Co , (_27^59)Co(α,n)(_29^62)C , (_29^63)Cu(α,n)(_31^66)Ga (من خلال حساب المقاطع العرضية لتفاعلات (الفا , نيوترون ) للتفاعلات المذكورة اعلاه والمنشورة في الادبيات العالمية ( EXFOR , ENDF , JEF , JEFF , GENDL) لانتقاء الطاقات الملائمة في حساب التفاعل للمستوى الارضي باستعمال على برنامج الحاسوب ( (Matlab - 7.6 وبخطوات طاقية معينة . تم رسم وجدولت النتائج المستحصلة من تطبيق المعادلات شبه التجريبية لتمثيل جميع التفاعلات التي تربط بين تغير المقطع العرضي مع مدى الطاقة المعين . بالاضافة الى حساب وجدولت بعض الخواص النووية للنظائر الموجودة في هذه التفاعلات كما وتم حساب وجدولت كل من طاقة التفاعل وطاقة العتبة لكل تفاعل ومقارنتها مع النتائج الموجودة في مركز الدراسات النووية (NNDC) وهي متوافقة معها بشكل جيد جدا . وكذلك تم حساب قدرة الايقاف باستعمال برنامج SRIMو تم حساب الحاصل النيوتروني وفقا لصيغة زكلر لكل تفاعل بالاستعانة بقدرة الايقاف . وقد استعملت قيم المقاطع العرضية لتفاعلات (الفا ، نيوترون) في حساب المقاطع العرضية لتفاعلات العكسية (نيوترون ،الفا) وللمستوى الارضي وذلك باشتقاق المعادلة شبه التجريبية لقيم المقاطع العرضية العكسية لكل من التفاعلات الاتية (_23^48)V(n,α) (_21^45)Sc , (_25^54)Mn(n,α)(_23^51)V , (_27^58)Co(n,α)(_25^55)Mn , (_29^62)Cu(n,α)(_27^59)Co , (_31^66)Ga(n,α)(_29^63)Cu وايجاد الثوابت لكل تفاعل. تم رسم وجدولت النتائج المستحصله وايجاد معادلة ملائمة للرسم التي يمكن من خلالها الحصول على مقاطع عرضية بطريقة مباشرة وسريعة وبسيطة وموثوقة | This work was concerned on study the properties of (alpha, neutron) reactions for nuclei that’s have odd atomic number in nuclear reactions [(_21^45)Sc(α,n)(_23^48)V,(_23^51)V (α,n),(_ 25^54)Mn (α,n)(_27^58)Co, (_27^59)Co(α,n)(_29^62)Cu ,(_29^63)Cu(α,n)(_31^66)Ga] , by calculating the cross sections of (alpha, neutron) reactions. The nuclear reactions were published in the world libraries (EXFOR , ENDF , JEF , JEFF , GENDL) most recent to select the suitable energies in calculating reverse nuclear reactions for ground state. In the present work, the cross sections were calculated from semi - empirical formula which were obtained and listed in tables using computer programs(matlab 7.7R2008). These formulas represent the variation of the cross section with energy, which could be used to predict the values of uncalculated cross sections. The stopping power according to Zeigler formula was used in order to obtain the neutron yield for each nuclear reaction. Neutron yield is very important to determine the best way to produce specific isotopes. The evaluated cross sections for (α,n) are used to calculate the cross sections for inverse reactions (n,α) using empirical formula of the inverse cross sections .The values of neutron energy and inverse cross sections have been drown and listed in tables. Qo - value, threshold energy, reduced mass and binding energy have been calculated and listed in tables for each reaction

الخصائص الكهروضوئية لاغشية TiO2 : CuO المحضرة بطريقة البلازما المنتجة بالليزر للتطبيقات الفوتونية Optoelectronic properties TiO2 : CuO films prepared by Laser induce plasma for photovoltaic applications

اسم المؤلف: نهى حسن حرب سلمان
اسم المشرف: صباح نوري مزهر
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الاغشية الرقيقة
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في القياسات تحقق من الخواص التركيبية والبصرية والكهربائية لاغشية ثنائي اوكسيد التيتانيوم TiO2)) النقية والمشوبة بمادة اوكسيد النحاس (CuO) والتي رسبت على ارضيات زجاجية منظفة بشكل مناسب بدرجة حرارة الغرفة وبتراكيز مختلفة من اوكسيد النحاس CuO (0,5,10,15,20)wt%. وقد استخدمت لذلك طريقة ترسيب الليزر النبضي (PLD) باستعمال ليزر النيدميوم ياك النبضي وبمعلمات ترسيب ثابتة وهي الطول الموجي 1064nm عند طاقة ثابتة 800mومعدل تكرار6Hz . وكان عدد النبضات المستخدمة (500), وقد لدنت الاغشية بدرجات حرارة مختلفة423, 523)K).تم تشخيص طبيعة تبلور الاغشية من خلال دراسة نمط حيود الاشعة السينية(XRD). اظهرت النتائج ان صفات الاغشية المحضرة ذات تركيب متعدد التبلور ومن النوع الرباعي والاتجاه السائد (110).كما وجد ان الحجم الحبيبي يزداد مع زيادة درجات الحرارة والتراكيز.كذلك تم دراسة طبوغرافية السطح باستخدام مجهر القوى الذرية (AFM), اذا تبين ان الحجم الحبيبي للاغشية المحضرة قد اعتمد على درجة حرارة التلدين. كما ادت زيادة درجة حرارة التلدين الى زيادة خشونة السطح.تمت دراسة الخواص البصرية بطريقتين من خلال تسجيل طيفي النفاذية والامتصاصية لمدى الاطوال الموجية (300 - 1100)nm، ومن خلال فحص شده الاستضاءة الفوتونية(PL) . اذ وجد ان قيمة فجوة الطاقة تقل بزيادة تراكيز مادة CuO والتلدين في كلا الفحصين.ومن خلال دراسة الخصائص الكهربائية للاغشية المحضرة, بينت النتائج ان التوصيلية الكهربائية قد زادت بينما هبطت قيمه طاقة التنشيط مع زيادة تركيز CuO ودرجة حرارة التلدين . اخيرا تم التعرف على نوع حاملات الشحنه من خلال قياسات تاثير هول, وكانت كافه الاغشية المحضرة من النوع السالب n , وبزيادة التركيز ودرجة حرارة التلدين يزداد تركيز حاملات الشحنة بينما تقل التحركية. | In this measurement, structural, optical, electrical properties of TiO2 (Nanocrytalline and CuO additive TiO2) were investigated. are successfully deposited on suitably cleaned glass substrate at constant room temperature, and different concentrations of CuO (0,5,10, 15,20)% wt. Pulse laser deposition(PLD) technique was used at a constant deposition parameter such as : (pulse Nd : YAG laser with λ=1064 nm, constant energy 800 mJ, repetition rate 6 Hz and No. of pulse was (500).The films were annealed at different annealing temperatures 423K and 523 K. The XRD measurements show that as deposit TiO2 : CuO thin films had polycrystalline structure, and XRD data of thin films coincided with tetragonal. The preferred orientation was along (110) direction for Rutile phase . The results show that the crystallite size increases with the increase of concentration of CuO and annealing temperature. AFM measurements confirmed that the films have good crystalline and homogeneous surface.The Root Mean Square (RMS) values of thin films surface roughness and grain size increased with the increase of annealing temperature. The optical energy gap is calculated by two techniques UV - Visible spectrum and Photoluminescence(PL)spectrum. Both indicate that the energy gap decreased with the increase of concentration of CuO and annealing temperature. By studying the electrical properties of TiO2 : CuO thin film, D.c measurements show that the increase of CuO concentration in the prepared thin films increases the conductivity, while the activation energy (Ea1,Ea2)decreases. Hall Effect measurements show that all films have n - type charge carriers and the increase of CuO concentration and annealing temperature lead to increase the concentration of charge carriers , while the mobility decreases

معالجة كفاءة الكاشف الوميضي السائل NE213 باستخدام طريقة مونت كارلو The Efficiency Treatment of the NE213 Liquid Scintillator Detector Using Monte Carlo Method

اسم المؤلف: نعمة حافظ ثابت البهادلي
اسم المشرف: علاء باقر كاظم ابراهيم رمضان عاكول
الموضوع العام: علوم الفيزياء
السنة: 2005
الموضوع الدقيق: الفيزياء التطبيقية
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا البحث معالجة كفاءة الكاشف الوميضي العضوي السائل NE213 للنيوترونات السريعة في المدى الطاقي Mev (0.1 - 15) باستخدام طريقة مونت كارلو، حيث تم بناء برنامج (MCOSE) على افتراض محاكاة التفاعلات التي تحدث بين النيوترونات والمادة الوميضية للكاشف، وهذه التفاعلات هي، الاستطارة المرنة للنيوترونات من قبل الهيدروجين والكاربون، الاستطارة غير المرنة من قبل نوى الكاربون والتفاعلين C12(n,n1) C12*  3α, C12(n, α) B9e.تم في هذا البحث ايضا، تم معالجة كفاءة الكاشف NE213 للنيوترونات بحجوم كبيرة. ان استجابة الكاشف NE213 للنيوترونات لاتتشكل فقط بسبب الاستطارة المرنة للنيوترونات من قبل نوى الهيدروجين. بل ان شكل دالة الاستجابة يعتمد ايضا على البروتونات المترسبة من حجم الكاشف، الاستطارة المضاعفة للنيوترونات من قبل نوى الهيدروجين والاستطارة (المرنة وغير المرنة) من قبل نوى الكاربون. البروتونات المترسبة من حافة التاثير ذات اهمية كبيرة للحجوم الصغيرة من الكواشف الوميضية.كتب البرنامج بلغة (FORTRAN - 77)، قورنت النتائج الحالية لحساب كفائة الكاشف الوميضي NE213 مع البيانات العملية لقياس الكفاءة لثمانية عدادات وميضية بابعاد (8.5 × 100)cm وقد اوجدت هذه المقارنة توافقا جيدا من حيث السلوك والتقارب بين حساباتنا وتلك القياسات، واخيرا نسبة الخطا في الحسابات الحالية للكفاءة هي اقل من (2%) كمعدل في كل عملية تنفيذ. | In the present work, we have been used efficiency treatment of the organic liquid scintillator detector NE213 for fast neutrons in energy range (0.1 - 15)Mev using the Monte Carlo Method.MCOSE program have been used on considers the simulation of neutrous reactions with scintillator detector material; neutrons elastic scattering on hydrogen and carbon nucleus, inelastic scattering on carbon nucleus and the reactions : C12(n,n1) C12*  3α, C12(n, α) B9e.In this work, also have been used the efficiency treatment the big volumes of NE213 detector for neutrons (~1m). The response of the NE213 detector for neutrons is formed not merely due to the neutrons elastic scattering on hydrogen nucleus. The response function shape also depends on proton leakage from detector volume, double scattering on hydrogen and scattering (elastic, inelastic) on carbon nuclous. The proton leackage is an edge effect, which is most important for small volumes of scintillator detectors.The program has been written in FORTRAN - 77 language. The calculations results were compared with experimental data of the efficiency measurements, for eight NE213 (8.5 × 100)cm liquid scintillator detector.One can see a good agreement between our results and the experimental data. Finally, the average percentage error of the efficiency values in our calculations results was less than (2%).

تحضير ودراسة بعض الخصائص الفيزيائية لاغشية (Bi2O3 : Al) الرقيقة بطريقة التبخير الحراري في الفراغ Preparation and study of some Physical properties for( Bi2O3 : Al) Evaporated Thin Films under vacuum

اسم المؤلف: نصر عيسى نجم
اسم المشرف: بشرى كاظم حسون الميالي
الموضوع العام: علوم الفيزياء
السنة: 2017
الموضوع الدقيق: الاغشية الرقيقة
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: حضرت اغشـيــة ( Bi2O3 ) على قواعد زجاجية بسمــك مختلـف( 450 , 350 , 250 ) nm وبـدقـة تصـل الـى ( ∓ 20 ) nm والمشـوب بمادة الالمنيـوم ( Al ) وبنسـب تشـويب مختلفة ( 3 , 2 , 1 ) % عنـد السمك ( 20 ∓ 450 ) nm والمحضرة بطريقـة التبخـر الحـراري في الفراغ وقد كان معدل ترسيب ( 1.20 nm / sec ) ,اضافة الى ذلك تم اكسدة اغشية البزموث ( Bi ) بدرجة حرارة ( 523 ) K وبزمن لا يزيد عن ساعة واحدة بوجود الهواء , وتـم دراسـة تاثيـر التلديـن علـى الخـواص التركيبيـة والبصـرية للاغشيـة النقيـة والمشـوبـة بـدرجات حــرارة ( 773 , 673 , 573 , R.T ) K ولمدة ساعة واحدة . استخـدمـت تقنية حيـود الاشعة لدراسـة الخصائص التركيبية للاغشية المحضرة واظهرت نتائج قياس حيود الاشعة السينية ( X - ray ) ان جميـع الاغشيـة المحضـرة النقيـة والمشوبـة تكون ذات تركيب متعـدد التبلـور ومـن النـوع الرباعـي والاتجاه السائد (201) لكل الاغشية المحضرة وزيادة معدل الحجم الحبيبي بزيادة سمك الغشاء , وهذا ما اشارت اليه قياسات مجهر القوة الذرية (AFM) كذلك يزداد معـدل الحجـم الحبيبي بزيادة نسب التشويب ما عدا النسبة ( 3 ) % . اظهرت الخصائص البصـرية ان النفاذية تتغير مع تغيـر كـل من سمك الغشاء ودرجة حرارة التلدين ونسب التشويب بالالمنيوم , وكذلـك تـم ايجاد فجـوة الطاقـة البصـرية للاغشيـة كافة فتبيـن انها مـن النـوع المباشـر المسموح لجميع الاغشية المحضرة وتزداد مع زيادة سمـك الغشاء, بينما تقـل مـع زيادة كـل من درجة حرارة التلدين ونسب التشويب عدا النسبة ( 3 % ) . اضافـة الى ذلـك تم حساب قيـم الثـوابـت البصريـة مثـل (معامل الامتصاص ومعامل الانكسار ومعامـل الخمـود وثابـت العـزل المعقد (الحقيقي والخيالي ) والتوصيلية الضـوئية ) كدالة الاطوال الموجية ( 1100 - 300 ) nm للاغشـية المحضرة . | This research includes studying the structural and optical properties of pure Bismuth Oxide ( Bi2O3 ) thin film at different thicknesses ( 250 , 350 and 450 ± 20 ) nm and doped by Aluminum ( Al ) of ( 450 ± 20 ) nm thickness with different doping ratios ( 1 , 2 , 3 ) % which is prepared by thermal evaporation method from depositing Bismuth film on glass substrates at R.T ( 300 ) K with deposition rate ( 1.20 nm / sec ) then oxidation Bismuth films at ( 523 ) K for one hour in air , Also it includes studing the effect of annealing temperature at ( R.T , 573 , 673 and 773 ) K for one hour on structural and optical properties for pure and doped films . The results of x - ray diffraction have been showed that pure and doped prepared films have polycrystalline structure with tetragonal phase with preferred orientation ( 201 ) for all prepared films the grain size increases with the increase of film thickness and this is in agreement with ( AFM ) measurements also it increases after doping except at ratio ( 3 % ) . This research also includes studing the optical properties of prepared pure and doped films . The transmission and absorption values changed with the changing of film thickness , annealing temperature and doping ratio with ( Al ) , the optical energy gap for allowed direct transition was evaluated and it increases with the increase of film thickness while it decreases with annealing temperature and doping percentage by ( Al ) except ratio ( 3 % ) . The optical properties results include calculating the optical constant (absorption coefficient , refractive index ,extinction coefficient, dielectric Constant with two parts real and imaginary and optical conductivity ) in the range of wave length ( 300 - 1100 ) nm for pure and doped films before and after annealing

تصميم مرشح الحافة للمنطقة المرئية - تحت الحمراء القريبة والمنطقة تحت الحمراء المتوسطة باستخدام طريقة الابرة DESIGN OF EDGE FILTER IN VIS - NIR AND MIR REGIONS BY USING NEEDLE METHOD

اسم المؤلف: نرمين علي جاسم
اسم المشرف: الاء نزار عبد الغفار
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الدراسة تم تصميم مرشحات الحافة لحالة السقوط العمودي وباعتماد الطريقة التوليفية المثلى (الابرة) في التصميم ضمن المنطقتين المرئية وتحت الحمراء القريبة (0.3 - 0.9 µm) والمنطقة تحت الحمراء المتوسطة (3 - 5 µm) . كما تضم ايضا دراسة وتصميم لمرشحات الحافة بنوعيها باستخدام الطريقة التحليلية) الكلاسيكية (و المقارنة مع تصاميم الطريقة التوليفية المثلى )الابرة( . اوضحت النتائج امكانية الحصول على تصاميم مثلى لمرشحات الحافة بنوعيها وباداء بصري امثل المتمثلة بنفاذية عالية لمدى واسع من الاطوال الموجية والحصول على حافة حادة وذلك باستخدام عدد مناسب من الطبقات وسمك اقل وبهذا وفرت التصاميم الحديثة الكلفة واعطت امكانية تصنيع تصاميم تخصصية معقدة. ابرزت الطريقة الحديثة) الابرة( حل الكثير من مشاكل التصميم والتي من ابرزها التموجات الحادة (ripples) التي تظهر في منطقة النفاذية (passband) حيث تم الحصول على مرشحات حافة ذات نفاذية عالية من دون اي تموجات. واشارت النتائج الى ان الزيادة في عدد الطبقات ساهمت في اعطاء اداء بصري افضل لمرشحات الحافة على عكس ما يحدث في حال استخدام الطريقة التحليلية حيث تؤدي الزيادة في عدد الطبقات الى زيادة التموجات .حيث تم التوصل لتصاميم مثلى من خلال التحكم بالسمك البصري لطبقات الطلاء مع المحافظة على السمك من الزيادة عن الحد المسموح . في هذه الدراسة تم بناء نموذج جديد وشامل من مواد متجانسة مهملة الامتصاص حيث تم استخدام نفس المواد لتصميم نوعي مرشحات الحافة ضمن كل منطقة من الاطوال الموجية المعنية . | In this current study needle technique presented as a powerful synthesis approach to design new construction design stacks for edge filters of long and short - wave pass for visible - near IR region (0.3 - 0.9 µm) and mid infrared region (MWIR) (3 - 5 µm). Also, it includes study and design of edge filters by using analytical method as well as the comparing of results with the new designs that achieved by needle technique.Results achieved optimal optical performance of edge filters which is characterized by the high transmittance, wide passband, and zero transmittance in stopband with managed to keep steepness of edge.We could to overcome many complex spectral problems. successfully we got designs with optimized optical performance in passband where ripples were eliminated over wide range of wavelengths. Also, we achieved a design of edge filter with special style of optical performance which it is impossible to achieve by analytical design method.The effect of needle technique leads to obtain new construction designs of edge filter for (LWP) and (SWP) by using suitable number of coating layers with small overall thickness, and that is important in manufacturing.It has been provided a promising coating materials system for use in design where the same coating materials was used in design of long - wave pass and short - wave pass in the concerned wavelengths regions

تصنيع ودراسة الخصائص الفوتوفولتائة للوصلة TiO2 (1 - x) Bix/Si بواسطة الترسيب بالليزر النبضي Synthesize and Characterization of TiO2(1 - x)Bix/Si Photovoltaic by Pulses Laser Deposition

اسم المؤلف: ميسون ذياب راضي
اسم المشرف: صباح نوري مزهر غصون محمد حميد
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا البحث استخدام طريقة الترسيب بالليزر النبضيPLD بواسطة ليزر Nd : YAG ذي الطول الموجي nm1064λ= وبمعدل تكرار Hz6 وفترة نبضة ns10 لترسيب اغشية رقيقة بنوعية عالية لثنائي اوكسيد التيتانيوم النقية والمشوبه بالبزموث وبنسب وزنية مختلفة (0, 3, 5, 7, 9) % تم الترسيب على قواعد زجاجيه ورقائق السليكون وذلك لدراسة تاثير التشويب على كل من الخصائص الفيزيائية لاغشية ثنائي اوكسيد التيتانيوم، وثم قياس خواص الكاشف TiO2 : Bi/ Si..بينت قياسات حيود الاشعه السينيه لاغشية ثنائي اوكسيد التيتانيوم النقية والمشوبة بنسب مختلفة (0, 3, 5, 7, 9) % بالبزموث بان هذه الاغشية تمتلك تركيب عشوائي للاغشية النقية تتحول الى متعدد التبلور عند التشويب والتلدين وذات تطابق جيد مع القمم القياسية لطوري Anatase وRutile وكان الاتجاه السائد للحبيبات هو باتجاه (110) Rutile مع زيادة التبلور بزيادة نسبة التشويب وخاصة لطور ال (Rutile)حتى نسبة 7% ومن ثم يتناقص عند نسبة التشويب 9% مع ظهور قمم صغيرة مطابقة لقمم البزموث . كذلك ازدياد درجة التبلور وخصوصا للطور (Rutile)عند زيادة درجة حرارة التلدين من درجة حرارة الغرفة الى 525 كلفن.تبين من دراسة سطح الاغشية بواسطة مجهر القوى الذريه ان الحجم الحبيبي يزداد بزيادة التشويب ثم يتناقص عند نسبة التشويب 9%. بينت دراسة اطياف النفاذية في مدى الطول الموجي ( nm1100 - 300) ان قيمة النفاذية لاغشية TiO2 النقية عند الطول الموجي 500nm تساوي 52.4 % وتناقصت عند التشويب بالبزموث , كذلك فقد وجد ان فجوة الطاقة البصريه لاغشية اوكيسد التيتانيوم النقية 3.7 الكترون فولت وقلت عند التشويب حيث تصل الى 2.2 الكترون فولت عند نسبة تشويب % 9.بينت دراسة الخصائص الكهربائية لاغشية ثنائي اوكسيد التيتانيوم النقية والمشوبة المتمثلة بتوصلية التيار المستمر في مدى درجة حرارة K(473 - 303) ,ان هذه الاغشية تمتلك طاقتا تنشيط وبزيادة نسب التشويب تقل قيمها وتزداد التوصيلية، ومن نتائج تاثير هول لتحديد نوع الحاملات يتضح بان كافة الاغشية المحضرة هي ذات حاملات من نوع السالب وبزيادة نسب التشويب والتلدين تزداد كثافة حاملات الشحنة وتتناقص التحركية. تزداد قيمة الاستجابية والكفاءة والكشفية النوعية لكاشف ال TiO2 : Bi/Siمع التلدين ومع زيادة نسبة التشويب بالبزموث من 0 - 7% ثم تقل عند نسبة 9% بينما تتصرف القدرة المكافئة للضوضاء عكس ذلك. تصل الاستجابية الى قمة عند 0.3 مايكرومتر ل TiO2النقية تتزحزح الى 0.6 عند زيادة نسبة البزموث الى 9% والى 0.4 عند التلدين بدرجة 523 كلفن كنتيجة لنقصان فجوة الطاقة | Pulse laser deposition is used in this research by Nd : YAG laser with λ=1064 nm average frequency, 6 Hz and pulse duration 10 nm) to deposit pure and content TiO2 thin films with Bismuth at different ratio (0, 3, 5, 7,and 9)wt. % on glass and Silicon wafer substrates to study the effect of content on the physical properties of TiO2 thin films and then study the TiO2 : Bi/ Si detector characteristics.X - ray diffraction pattern measurements for pure and contented titanium dioxide films with different content ratio of Bi (0, 3, 5, 7 and 9)% show that these films amorphous structure converted to polycrystalline structure with annealing and content and have a good identically with standard peaks for Anatase and Rutile phases. The preferred orientation is along (110) direction for Rutile. The crystallinity of the films increase with increasing content ratio to 7% Bi and specially for rutile phase then decrease at 9%. The crystallinety went up when annealing temperature increases from RT to 525K.From Atomic Force Spectroscope, a topography of prepared films show an increment in average diameter with content ratio then it started to decrease when it reach 9%.UV - visible spectra from 300 to 1100 nm shows that the pure TiO2 film has 52.4% transmittance at 500 nm wavelength. The transmittance decreases with increasing of content ratio with Bi. The optical energy gap for pure TiO2 film is about 3.7 eV and decrease with content until it reaches 2.2 eV at 9% Bi content.The results of electrical properties are represented by DC conductivity in temperature range (303 - 473) K for pure and contented TiO2 films show that these films have two activation energies and with increasing content ratio, these activation energies decrease and the conductivity decreases, as well Hall effect measurements show that all films have n - type charge carriers and its concentration increases and the mobility decreases with content and annealing.The responsivity, quantum efficiency and the specific detectivity for TiO2 : Bi/Si detector increase with annealing and with increase Bi content from 0 to 7% then decrease at 9% , while the NEP has inverse behavior. The responsivity reached peak at λ= 0.3 μm for pure TiO2 and this peak shift to 0.6 μm when Bi content increase to 9% and shifted to 0.4 μm when annealed at 523 K as a results of decreasing the energy gap

دراسة التغيرات الحاصلة في منطقة ميسان باستخدام صور الاستشعار عن بعد للفترة 2000 - 2013 A Study the Change Detection in Maysan Province Using Remote Sensing Images between 2000 and 2013

اسم المؤلف: ميساء رابع نعيمة
اسم المشرف: علياء حسين علي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: معالجة الصور
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ان طريقة اكتشاف التغيرات هي طريقة لتحديد التغيرات في مشهد لمنطقة ما .ولغرض دراسة هذه التغيرات نستخدم صور فضائية بحزم مختلفة وازمان مختلفة . في الدراسة الحالية تم استخدام صور القمر الصناعي Landsat - 7 ETM)) لفترة بين (2000 و2013) لغرض دراسة التغيرات الحاصلة في جنوب العراق وتحديدا لمنطقة ميسان عدة خوارزميات تم استخدامها لغرض مراقبة وتحديد التغيرات الحاصلة خلال سنوات الدراسة علما ان المنطقة قد تعرضت الى تجفيف الاهوار في سنة 2000 وبعد 2003 تم غمر المنطقة بالماء وعادت مياه الاهوار . ان الدراسة التقليدية لتميز التغيرات التي تحصل بالمناطق خلال السنوات هي الطرح (طرح الصور) وطريقة القسمة (قسمة الصور). ان طريقة تحليل المركبات الاساسية هي طريقة جيدة تستخدم لغرض تحديد وتميز التغيرات التي ممكن ان تحصل خلال سنوات بعيدة . ان طريقة تحليل المركبات الاساسية هي طريقة احصائية تجعل البيانات المترابطة بيانات غير مترابطة وعادة المركب الاساسي الاول (PC1) يحمل الكمية الكبيرة من المعلومات وبقية المركبات تحتوي على المعلومات المتبقية التي لم تظهر في المركب الاول وعادة يكون المركب الاخير هو الضوضاء.في هذا البحث تم استخدام ست حزم اخذت من القمر الصناعي (Landsat - 7 ETM) لغرض دراسة التغيرات الحاصلة في منطقة العمارة في محافظة ميسان وتحديدا هور الحويزة خلال السنوات بين 2000 و2013. طرق متعددة تم استخدامها لغرض دراسات التغيرات الزمنية والمكانية للمنطقة. ومنها طريقة الطرح والقسمة ( طرح الصور الفضائية بين 2000 و2013 وناتج عملية القسمة ) وتم استخدام نتائجها مع ( PCA ) لغرض الحصول على افضل طريقة لدراسة التغيرات الزمانية والمكانية . لقد تم استخدام طريقة التصنيف الغير موجة (K - mean) التي اعتمدت على اللون والمسافة بين الاصناف لغرض تحديد التغيرات الحاصلة في الفترة الزمنية البعيدة . ايضا تم استخدام طريقة هجينة وهي ناتج طرح الصور بين 2000 و2013 وطريقة القسمة مع (K - mean) .تم تصنيف ناتج (PCA) مع القسمة والطرح بطريقة (K - mean) بالاضافة الى تصنيف الصور الفضائية (2000 و2013) مع (PCA) لها حيث اخذت (PCA) لكل حزمة عند (2000 و2013) وبعد ذلك تم تصنيفها اعتمادا على المسافة واللون بين الاصناف وتم حساب الخصائص الاحصائية والمساحات لكل صنف لمنطقة هور الحويزة والمناطق المجاورة له . اظهرت النتائج ان عملية الطرح هي افضل من عملية القسمة في تمييز التغيرات لان (PC1) يحوي على 91.37% من المعلومات وان عملية القسمة تعطي 64% لل (PC1) من نسبة المعلومات الموجودة في الحزم المستخدمة لغرض الدراسة . في هذه الدراسة تم استخدام برنامج ENVI وبرنامج MATLAB للكشف عن التغيرات الحاصلة في منطقة ميسان . | Change detection is the process of identifying the difference in the scenes of an object or a phenomenon, It uses multi - temporal image data sets from landsat - 7 ETM between 2000 and 2013 in order to detect changes in the area of southern Iraq province of Maysan and from spectral discrepancies. Many algorithms have been applied to monitor various environmental changes. The traditional ways to detected the changes in regions are the image difference (ID) and image ratio (IR). The transformation process which is the principal component analysis (PCA) is statistical technique that transforms the correlated data into uncorrelated data. The (PCA) are chosen so that the first Principal Component (PC) expresses the maximum amount of information. The rest (PCs) contain the information's which don't appear in the first (PC). Six bands data sets are taken from the landsat - 7 ETM (Enhanced Thematic Mapper). To determine the changes which occur in AL Ahwaz marsh in master city during 2000 and 2013. Different methods were used to study the changes which occur in this region the subtraction method which in (ID) and the ratioing method (IR) and the (PCA) method. Compain the (PCA) with (ID) and (IR) to produce the best way to detect the changes.The unsupervised classification process which is the modified (K - mean) is used to classify the changes occur in the marshal region and the area surrounding it. This type of classification depend on the color and distance between the classes, a hybrid methods which are the (ID) with the K - mean, (IR) with (K - mean) PCA of (ID) with the K - mean, PCA of (IR) with the K - mean and the (PCA with the K - mean) statistical features have been calculated for each method to find the changes which occur during the years. All these methods illustrated the changes which occur during these years.Results showed that the subtraction process is the best of the ratioing process in distinguish because of changes (PC1) Includes a 91.37% of the information and the process of ratioing gives 64% of the (PC1) of the proportion of the information in the bands used for the purpose of study.This thesis result for detecting the changes using PCA and the unsupervised classification which in K - mean using ENVI (Environment for Visualizing Images) and the MATLAB (short for MATrix LABoratory).

تحضير ودراسة متراكبات بوليمرية مدعمة من نوع PMMA/Graphene وPMMA/ZnO النانوية Preparation and Studying of Polymeric Reinforced Composites Type PMMA/Graphene and PMMA/ZnO Nanoparticles

اسم المؤلف: مصطفى عبد الكريم جهاد الاوجي
اسم المشرف: تغريد مسلم مريوش الساعدي
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم تحضير مساحيق نانوية بطريقة هامر وطريقة الصول - جل , اذ تم تحضير رقائق الكرافين باختزال اوكسيد الكرافين المحضر بطريقة هامر باستعمال مسحوق وقضبان الكرافيت , بينما حضر اوكسيد الزنك النانوي بطريقة الصول - جل . كما تم تحضير متراكبات بوليمرية نانوية بهياة اغشية سميكة بسمك نحو (0.206mm) وبهياة (Bulk) بطريقة الخلط والصب اليدوي (Hand lay - up) باستعمال راتنج بولي ميثيل ميثاكرليت (PMMA) كمادة اساس ورقائق الكرافين او اوكسيد الزنك كمادة تدعيم وبنسب وزنية (0.1,0.3,0.5,1,2)% .تم اجراء الفحوص التشخيصية للمساحيق النانوية والاغشية النقية والمدعمة باستخدام تقنيات (XRD,SEM,EDX,DLS) . اظهرت نتائج قياسات حيود الاشعة السينية ان جميع المساحيق النانوية المحضرة ذات تركيب بلوري متعدد التبلور ومن النوع السداسي , واظهرت انماط حيود الاشعة السينية ذروتين بالنسبة لاوكسيد ورقائق الكرافين بالمدى الزاوي (5 - 70)ᵒ للسطح (001) لاوكسيد الكرافين و(002) , (100) لرقائق الكرافين , بينما اوكسيد الزنك اذ ظهرت له ثمان ذروات عند المدى الزاوي (20 - 80)ᵒ للسطوح الثلاثة الاكثر شدة هي (100),(002),(101), كما اظهرت نتائج الحيود ان للاغشية النقية والمدعمة هيمنة الاتجاه (002) بالنسبة للاغشية المدعمة برقائق الكرافين ، بينما يهيمن الاتجاه (100) بالنسبة لاغشية المدعمة باوكسيد الزنك النانوي , كما اظهرت حسابات الحجم الحبيبي ان هناك تناقصا واضحا بزيادة نسب التدعيم .اوضحت نتائج فحوصات (DLS) ان الحجم الحبيبي لرقائق الكرافين كان بحدود 200nm , بينما كان الحجم لاوكسيد الكرافين 20nm واوكسيد الزنك بحدود 15.8nm , اما صور (SEM) فقد اظهرت اوكسيد الكرافين بشكل تكتل زغبي بينما الكرافين بشكل رقائق او صفائح اما اوكسيد الزنك بشكل شبه كروي وقضبان نانوية ذات اطوال مختلفة . اما بالنسبة لفحص (EDX) فقد ظهرت قمة عالية للكاربون عند (1.8 KeV) لمسحوق الكرافين واوكسيد الكرافين كما ظهرت قمة للاوكسجين (0.53KeV) تعود لاوكسيد الكرافين , اما اوكسيد الزنك فقد اظهر قمة عالية عند (1.1KeV) تعود للزنك وقمة عند (0.53KeV) تعود للاوكسجين .كما تضمن البحث دراسة الخواص البصرية للاغشية المحضرة منها قيمة فجوة الطاقة البصرية للانتقالات الالكترونية المباشرة المسموحة , وكذلك تم حساب معامل الامتصاص والانعكاسية ودراستها من خلال طيفي الامتصاصية والنفاذية ضمن مدى الاطوال الموجية (300 - 1100)nm , واظهرت النتائج ان قيم فجوة الطاقة البصرية تقل مع زيادة نسب التدعيم بالنسبة للكرافين واوكسيد الزنك ZnO.شملت نتائج القياسات البصرية ايضا حساب الثوابت البصرية المتمثلة (معامل الانكسار , ومعامل الخمود , وثابت العزل الكهربائي بجزايه الحقيقي والخيالي ) , ووجد ان هناك زيادة في قيم معامل الخمود ومعامل الانكسار بزيادة نسبة التدعيم .كما تم دراسة الخواص الحرارية والميكانيكية للمتراكب البوليمري المدعم بالمواد النانوية , ولوحظ ان الصلادة ودرجة الانتقال الزجاجي تزدادان بزيادة نسبة التدعيم . | In this study , nanopowders prepared by using Hummer's and Sol - Gel methods , Graphene was prepared by Hummer's method using graphite powder and rods graphite , while zinc oxide was prepared using Sol - Gel method. Nanocomposites were prepared in form of thick films with thickness (0.206)mm and (Bulk) by blend and (Hand lay - up) methods using resin (PMMA) as a matrix and graphene flakes or zinc oxide as reinforced materials . The nanopowders , pure and reinforced films were characterized by using the techniques (XRD,SEM,EDX,DLS) , the results of XRD exhibit in the angular range (5 - 70)ᵒ grahene oxide with surface (001) while graphene flakes have two peaks in (002) and (100) , zinc oxide in angular range (20 - 80)ᵒ exhibits eight peaks with three high intensity surfaces (101) , (002) and (100). While XRD results showed the pure and reinforced films with dominance of (002) surface in films reinforced by flakes and dominance of (100) surface in films reinforced by nano zinc oxide . DLS test showed that the particles size of graphene flakes is in the range 200nm and graphne oxide is in 20nm while zinc oxide is 15.8nm . SEM images showed graphen oxide has the form of agglomerated and graphene like flakes or plates while ZnO has semispherical and nanorods form with different lengths. EDX test showed that all powders have strong peaks , high carbon peak exhibits at (1.8KeV) while zinc exhibits at (1.1 KeV) with oxygen peak at (0.53KeV) for both graphene oxide and ZnO , and we saw other small peaks represent impurities with small weight percentages that exhibited during the preparation . Optical properties was studied for preparing thick films from absorptance and transmittance spectrum for the range (300 - 1100)nm. Results showed the energy gap is decreased by the increase of the concentration of reinforced material , the reflectance and the absorption coefficient were calculated by this spectrum .And we calculated other optical constants like refractive index, extinction coefficient and dielectric constant in its two parts .Also we saw the extinction coefficient and refractive index increase with the increase of the concentration.This work included thermal and mechanical properties. The results showed the hardness and the degree of glass transition which increased with the increase of the concentration .

تقييم كفاءة خلية شمسية من مادة السيليكون ذات اخاديد مختلفة الشكل باستخدام برنامج زيماكس Efficiency Evaluation of Different Grooves Silicon Solar Cell Using ZEMAX

اسم المؤلف: مريم ازهر علي غالب
اسم المشرف: علاء بدر حسن
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: فيزياء الطاقة الشمسية
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا البحث تصميم خلية شمسية سليكونية ذات اخاديد تلامس سطحها العلوي لزيادة كفاءة الخلية عن طريق تقليل الانعكاسية للاشعة الساقطة، وكذلك زيادة طول المسار البصري للاشعة وتقليل عدد الاشعة الساقطة بزاوية اقل من الزاوية الحرجة، وبالتالي زيادة فرصة امتصاص الفوتونات داخل الخلية. تكون الاخاديد مصنوعة من السليكون وتضاف الى سطح الخلية الشمسية، حيث تلامس سطحها العلوي، وصممت بخمسة اشكال هي : ( الاول : خلية شمسية ذات اخاديد مثلثة الشكل متغيرة عرض القاعدة، والثاني : خلية شمسية ذات اخاديد مثلثة الشكل متغيرة عرض الراس، والثالث : خلية شمسية ذات اخاديد مستطيلة الشكل متغيرة الارتفاع، والرابع : خلية شمسية ذات اخاديد مستطيلة الشكل متغيرة العرض، والخامس : خلية شمسية ذات اخاديد نصف كروية الشكل ). ويوضع اسفل كل خلية كاشف له ابعاد تساوي ابعاد الخلية يكون متحسسا للضوء المرئي والاشعة تحت الحمراء الذي يتوافق مع نفاذية السيليكون حيث كلما ازدادت الانعكاسات الداخلية للخلية ازدادت قراءة الكاشف، وبالنتيجة يمكن معرفة مقدار كسب الاشعة من خلال زيادة طول المسار البصري لها. صممت الاخاديد لقيم مختلفة من نسبة المظهر وهي (0.5 - 0.6 - 0.7 - 0.8 - 0.9 - 1 - 1.2 - 1.4 - 1.6 - 1.8 - 2)، وعند كل نسبة مظهر يتغير طول الاخدود (Z) مرة وعرض الاخدود (W) مرة اخرى، اذ تساعد هذه الاخاديد على تقليل الانعكاسية وزيادة طول المسار البصري، وبالتالي رفع كفاءة الخلية الشمسية. صممت الخلايا الشمسية في هذا البحث باستخدام برنامج (زيماكس) للتصاميم البصرية حيث استخدم نظام تتبع الاشعة غير المتسلسل وكان عدد الاشعة المستخدم في البرنامج نحو (1000) شعاع يسقط بصورة عمودية على الخلية ( ͦ 0 = ϴ)، وتم استخدام زاوية ميلان الاشعة الساقطة بحدود ( ͦ 10 - ͦ 80 ) باتجاهين الاول موازي والاخر مقاطع للاخاديد، وذلك لمعرفة تاثير زاوية السقوط على كفاءة الخلية ومدى تاثير الاخاديد على زاوية السقوط. وبعد هذا العمل والدراسة فيه تم التوصل الى ان افضل نموذج من هذه النماذج الخمسة والاكثر كفاءة هو نموذج خلية شمسية ذو اخاديد نصف كروية الشكل اعطى اعلى قراءة كاشف (3500) شعاع اي ثلاثة اضعاف ونصف العدد الاصلي ، ويليه ثانيا نموذج الخلية الشمسية ذات الاخاديد المثلثة الشكل متغيرة عرض القاعدة حيث اعطى اعلى قراءة كاشف (2500) شعاع اي يعادل مرتين ونصف العدد الاصلي من الاشعة الساقطة، ثم يليه ثالثا نموذج الخلية الشمسية ذو الاخاديد المثلثة الشكل متغيرة عرض الراس وتصل اعلى قراءة كاشف (1400) شعاع، ويليه نموذج الخلية الشمسية ذات الاخاديد المستطيلة الشكل بنوعيها وتصل اعلى قراءة كاشف (1000) شعاع اي العدد الاصلي نفسه من الاشعة الساقطة. ونلاحظ انه عند تغير الزاوية تظهر قراءة الكاشف بهبوط تدريجي. يكون توزيع الاستضاءة للنماذج بوجود تفاوت طفيف في توزيع الاشعة على الخلية، مما يثبت ان توزيع الاستضاءة منتظم لكل ابعاد الخلية. | In this work silicon solar cell has been designed with grooves texture it's upper surface to increase efficiency by reducing reflection of rays and increasing optical path through the cell and subsequently increasing absorption photons into the cell. The grooves is designed from silicon and appended to the upper surface of solar cell. There are five samples have been designed : triangle shape grooves solar cell with variable base, triangle shape grooves solar cell with variable apex, rectangular shape grooves solar cell with variable height, rectangular shape grooves solar cell with variable width, and semicircular shape grooves solar cell. There is detector positioned at the bottom of the cell which has sensitivity for visible light and ir that appropriate with silicon optical transmission and whenever increase internal reflections for cell increase the detector reading then the result it the quantity of ray from increasing optical path. The grooves designed of variable value of aspect ratio (0.5 , 0.6 ,0.7 ,0.8 , 0.9 ,1 , 1.2 ,1.4 , 1.6 , 1.8 and 2) and at any aspect ratio value either grooves length (z) or grooves width (w) variant. The grooves decrease the reflection and increasing optical path through the cell and subsequently increasing solar cell efficiency. In this work, solar cell has been designed by using non - sequential ray tracing mode software program for optical design (zemax). The number of rays used in the program (1000) rays incident vertically on the cell ( ͦ 0 = ϴ) and used incident ray bevel angle( ͦ 10 - ͦ 80 ) in two directions parallel and cross with the grooves to explanation the effect of incident angle on cell efficiency and grooves effect range on incident angle. The best model achieved the five models and (more efficiency) it semicircular shape grooves that gives detector reading (3500) rays equal three times and half of grand number of incident rays, and then triangular shape grooves with variable base that gives detector reading (2500) ray equal twice and half of the grand number of incident rays, and then triangular shape grooves with variable apex that gives detector reading (1400) ray, and then rectangular shape grooves that gives detector reading (1000) ray equal the grand number of incident rays. Obviously increasing angle caused graduated detector reading. The illuminance distribution shows variation of rays distribution on the cell that give uniform illuminance distribution for all cell dimensions.

نماء وميزات بلورات K2SO4 المطعمة بايونات النحاس Cu+2والحديدFe+2 Crystal Growth and Characterization of Doping K2SO4with Copper Cu+2and Ferrite Fe+2 ions

اسم المؤلف: مريم عيسى فيصل
اسم المشرف: طارق عبد الرضا علوان الظاهر
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: نماء بلورات احادية لكبريتات البوتاسيوم النقية والمطعمة بايون النحاس (Cu+2) وايون الحديد (Fe+2) الناتجة عن كبريتات البوتاسيوم K2SO4 بوصفها مادة اساس وباضافات محددة من كبريتات النحاس CuSO4.5H2O وكبريتات الحديدوز FeSO4.7H2O بنسب وزنية (1% ,2% ,3% ,5%)بوساطة تقنية التبخر البطيء للمحلول المائي في درجة حرارة الغرفة لكونها سهلة وتعطي نتائج ذات جودة مقبولة , وبمولاريةM=1 وبابعاد (9x3x2)mm3 لبلورة K2SO4 النقية وبابعاد (28x18x4)mm3 بعد اعادة التبلور , ودراسة اثر التطعيم في النماء البلوري والخصائص التركيبية , ففي حالة التطعيم بكبريتات النحاس اذ كانت ابعاد اكبر بلورة بعد اعادة التبلور عند التطعيم بنسبة 3% ,2%)) وهي (14x12x9) mm3 (12x11x12)mm3 على التوالي , اما في حالة التطعيم بكبريتات الحديدوز المائية كانت ابعاد اكبر بلورة بعد اعادة التبلور هي في النسبة 3%, اذ اظهرت الدراسة اهمية اعادة نماء البلورات لمرة اولى وثانية ومدى تحسن الخصائص البلورية الناتجة عن هذه العملية من حيث النقاوة والحجم والهيئة , فنلاحظ ان المادة في الحالة النقية تكون اكبر حجما بالابعاد , وتم التاكد من التركيب البلوري للبلورة النقية , وللبلورات المطعمة اعتمادا على مخططات حيود الشعاع السيني وتحليل بنية البلورات بوساطة مقياس حيود الاشعة السينية للمسحوق واستخدام تصفية ريتفيلد لحساب معلمات خلية الوحدة unit cell وثوابت الشبيكة للبلورات المنماة. تمتلك بلورة K2SO4 النقية قبل التطعيم النظام البلوري المعيني المتعامد المحاور (Orthorhombic) وثوابت خلية الوحدة المطابقة تقريبا لبطاقة JCPDSوالدراسات السابقة , اما للبلورات المطعمة تشير مخططات XRDالى تعرضها لبعض التغيرات في البناء البلوري وتحول النظام من المعيني المتعامد المحاور الى احادي الميل (Monoclinic) في حالة التطعيم بالنحاس بنسبتي 2% ,3% , ودراسة الانماط الاهتزازية للبلورات المنماة بتقنية FTIR اذ نلاحظ حدوث امتصاص للحزمة العريضة عند القيمة 1097 cm - 1 للبلورة النقية K2SO4 والمطعمة بتزحزح قليل يتراوح بين 3 ± عن قيمة العدد الموجي في الحالة النقية وهو ما يميز انماط الاهتزاز للمجموعة الكبريتية , واخيرا درست الانتقالات الطورية من اختبار مسعرية المسح التفاضلي DSC اذ لوحظ تغير الطور لبلورة K2SO4 في درجة الحرارة 581˚C اما العينات المطعمة فنلاحظ حدوث تزحزح بمقدار ±2 عن العينة النقية , وحساب السعة الحرارية لهذه البلورات من مخططات اختبار DSC . | Single Crystal of Pure and Cu+2 , Fe+2 doped potassium sulfate a rising from potassium sulfate as a material basis and additions specific of copper sulfate CuSO4.5H2O and ferrous sulfate FeSO4.7H2O proportions by weight (1% ,2% ,3% ,5% ) were grown from aqueous solutions by the slow evaporation technique at room temperature, for easy being and give acceptable quality results with Normality M=1 , with dimension of (11x9x4) mm3(9x3x2) mm3 and dimensions (28x18x4) mm3 after re - crystallization to crystallize pure K2SO4 , and study The influence of doping on crystal growth and synthetic properties crystalline, after doping ,in the case of doping of copper sulfate it was the biggest dimensions of crystal doped by 3% 2% after re - crystallization was (14x12x9)mm3 (12x11x12)mm3, respectively , also in the case of dopants ferrous sulfate was larger dimensions crystal after re - crystallization at in the ratio of 3% , as the study showed the importance of re - crystallization of crystals - time first and second and the extent of improvement in characteristics of crystalline resulting from this process in terms of purity, size and body , We note that the Crystal in the pure case be larger dimensions, Structure analysis of the grown crystals were obtained and confirmed by X - Ray powder diffraction measurements. The diffraction patterns were analyzed by the Rietveld refinement method to calculate the unit cell parameters of these crystals , XRD measurements show the crystal system of orthorhombic, Space group (Pnma) and constants of the unit cell, the agreement to the card JCPDS and previous studies, XRD schemes indicate to occur some of the changes in the construction of crystal Structure for dopant crystal and transformation from Orthorhombic to Monoclinic system at the case of dopante copper 2%, 3%, and study the vibrational patterns for the grown crystals by technology FTIR , where we note the occur uptake of broadband at the value of number wave 1097 cm - 1 for pure Crystal K2SO4 , and dopants Crystals occur few Shift about 3 ± from the value of the wave number from the pure case. It was that distinguishes the vibration patterns of the group sulfur, finally studied phase transitions by test Calorimetry differential scanning DSC , a change phase was observed to crystal K2SO4 at temperature 581˚C and dopants Crystals we note the occur Shift about ± 2 for the pure sample , calculate the heat capacity for these Crystal from DSC analysis schemes.

التحليل الاحصائي لخصائص الصور الرقميه لامراض الرئة باستخدام الاشعه السينيه Statistical Features Analysis of Lung Disease in Chest X - ray Images

اسم المؤلف: مروة عبد المجيد عزيز
اسم المشرف: صباح نوري مزهر
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: معالجة الصور
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يعتبر الكشف المبكر عن امراض الرئة وخاصة مرض السرطان يعتبر من المشاكل الكبيره لان تركيبه الخلايا السرطانية والتركيبات الفسيولوجية لها معقدة ومن الصعب تشخيصها بسبب التركيبة المعقدة للرئة لانها تتكون من عدة فصوص وبمساعدة التقنيات الحديثة مثل الاشعة السينية والتقنيات الرقمية اصبحت عملية الكشف المبكر عن امراض الرئة اسهل واقل تعقيد.تحتوي صور الاشعة السينية على ضوضاء وذلك لاحتوائها على عظام القفص الصدري وكذلك عظام القص بالاضافة الى ان الاشخاص يرتدون بعض الملابس التي تظهر بالتصوير مما يشكل عقبة كبيرة في تمييز الامراض وخاصة الاورام. لقد تم الاستعانه بنظام برمجي يعتمد على معالجه الصور الرقميه وتحليل الانسجه لغرض اعطاء افضل النتائج في تمييز امراض الرئه ومن الجدير بالذكر ان الصور التي تم التعامل معها ماخوذة من مستشفى دبي بالامارات ومعهد الاشعة في باب المعظم .تم في هذا البحث تطوير خوارزمية لغرض التخلص من عظام القفص الصدري والقص وكذلك الضوضاء باستخدام التقنيات الرقمية الحديثة حيث استخدمت طريقتان الاولى لم تعط النتائج المطلوبة والثانية اعطت نتائج جيدة وبمساعدة عملية التعتيب (Thresholding) تم فرز المرض ( الورم ) .استخدمت طريقة تحسين الصور بالاعتماد على بعض المرشحات بالاضافة الى طريقة الكشف عن الحواف . لقد قسمت الرئة الى جزئيين علوي وسفلي وتمت المقارنة بينهما من خلال حساب الخصائص الاحصائية التي تم استخراجها من احد طرق التحليل النسيجي وهي First order ) ) .وعند تشخيص المنطقة التي تحتوي على الورم يتم دراسة نسيجها وتحليله بالطرق الاحصائية . ايضا تم استخدام طريقة حساب الخصائص الهندسية والتي تعطي معلومات حول انتظامية شكل الورم .كل مرض بالرئة ياخذ شكل معين وحساب الانتظامية يسهل عملية تشخيص المرض او الورم.واخيرا تم استخدام طريقة قوانين الاقنعة التي لفت مع الصورة ومعها استخدمنا طريقة التجزئة الملونة ( Watershed) حيث اظهرت عملية المزج هذه نتائج جيدة لفرز نسيج الورم عن نسيج الرئة السليم.اظهرت الدراسة تطابق بين النتائج المستخرجة وتشخيص الطبيب الاختصاصي. | The early detection of lung disease, especially lung cancer is a difficult problem, because of the structure of the cancer cells or other pathological. The cells are difficult to be diagnosed and identified, because the complex structure of the lungs. With the help of the detectors and the x - ray images, the detection of the lung disease become easier, but the x - ray images contain noise and the rips appear in the images, which forms an obstacle in showing the infection in the lung. A computerized system that depends on the digital image processing with the textural analysis produced a good way to detect the lung disease. Two ways have been implemented to detect the diseases, one of them failed but the other gives good result to segment the tumor.The statistical and geometrical feature has been accounted for the normal part and abnormal. In this study the segmentation process (tumors and diseases) since its tissue differed from the normal part of the lung our test samples were taking form hospital in the United Arab Emirates and the institute of radiology (Medical city). The first order textural analysis has been used for lung texture analysis with the help of Enhancement and edge detection methods. The geometrical parameters have obtained. These parameters help to give the specific area and shape of the tumor or cancer, which helps the radiologist to give the right amount of radiation therapy without affecting the normal parts. Also, the low mask which is a statistical texture analysis used with the color segmentation method (watershed) to detecting the tumor and analyzing its texture. Finally, the statistical and geometrical features with the help of the segmentation method produce a good way for the detection of the lung disease and to give the specific treatment.

تصنيع كاشف من انابيب الكاربون النانوية لليزر الاشعة تحت الحمراء Fabrication of Carbon Nanotubes Detector for IR Laser

اسم المؤلف: مروة عبد الرحمن داود
اسم المشرف: سمر يونس طه وسن رشيد صالح
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الدراسة تم تصنيع كاشف يعمل في منطقه الاشعة تحت الحمراء البعيدة وبدرجة حرارة الغرفة باستخدام اربع انواع من انابيب الكاربون النانوية متعددة الجدران. (MWCNTs, COOH - MWCNTs, short - MWCNTs and DWCNTs) .انابيب الكاربون النانويه رسبت بتقنيه (dip coating) و((drop casting لتحضير اغشية انابيب الكاربون النانوية متعدد الجدران على قاعده سليكون مسامي من نوع n و. p تم تبخير اقطاب الالمنيوم على اغشيه انابيب الكاربون النانوية لتصنيع كاشف يعمل في منطقه الاشعة تحت الحمراء البعيده. تم دراسه الخواص التركيبيه والطبوغرافية والبصريه وحسابات هول لهذه الاغشيه المصنعة . تم فحص الخواص التركيبه لغشاءMWCNTs باستخدام حيود الاشعه السينيه (XRD) واظهرت النتائج ان له تركيب متعدد االتبلور وشكله سداسي والغالب كان باتجاه (002). مجهر القوة الذري ((AFM تم فية التركيز على تشخيص خواص السليكون المسامي مع انابيب الكاربون النانوية متعددة الجدران. وجد ان الفلم له توزيع سطح متجانس مما يشير الى التوزيع الجيد لانابيب الكاربون النانوية فوق النتؤات النانوية للسليكون. تم تعين معدل الحجم الحبيبي وكانت بحدود 87.05 nm . المجهر الالكتروني الماسح (SEM)استخدم لدراسة طوبوغرافية اغشيه انابيب الكاربون النانوية متعددة الجدران ووجد ان هذه الاغشيه متجانسة ولاتوجد فيها اية تكتلات او شقوق .فجوة الطاقه البصرية في المنطقة تحت الحمراء تم ايجادها من فحص FTIR وكانت فجوة الطاقة0.12 eV. دراسة طيف رامان ولانابيب الكاربون النانوية متعددة الجدران, بينت ان الطيف يتحدد بثلاثة انواع من الحزم D وG وPRM .وجدن الخط (D) وجد انه يقع عند 1561.62 cm - 1 والتي تشير الى عدم الانتظام بسبب العيوب وتقوس لشبيكه انابيب الكاربون متعددة الجدران بينما الخط (G) يقع بحدود 1750 cm - 1 ويكون نتيجه اهتزازات في اواصر C - C الخط الثالث PRMكانت تقع عن2700 cm - 1, هذه الحزم ممكن استخدامها لتقدير اي عيوب في الكاربون. نسبه الشدة D/G تساوي 1.135 . مطياف الاشعه تحت الحمراء استخدم لدراسة طيف انابيب الكاربون النانوية وللبوليمر والصبغة وظهرت امتصاصية جيده لانابيب الكاربون النانوية عند الطول الموجي 10.6 µm والذي يقع ضمن منطقة تحت الحمراء البعيدة ممايجعلها اختيار جيد لتطبيقات الاشعة تحت الحمراء. اظهرت قياسات تاثير هول ان انابيب الكاربون متعدد الجدران المرسبة على قاعدة السليكون المسامي هي من نوع شبه الموصل الموجب p - type)) ولها توصلية عالية. خصائص التيار - فولتيه واستجابيه الكاشف المصنع قيست عند الظلام والاضاءة لهذه الاغشيه بواسطه التشعيع بليزر ثاني اوكسيد الكاربون بطول موجي 10.6µm وبقدرة 2.5 W و2.2 . استجابية وخصائص كاشف التوصيل الضوئي تم تحسينها عن طريق تغطية افلام انابيب الكاربون النانوية متعدد الجدران بطبقة سمكها0.1mm من البوليمرات polyanilin وpoly methyl acrylae وبالاضافة الى صبغة methylene blue هذه الانواع من البوليمرات المطعمة بالصبغه تعتبر كمعالجة سطحية لغشاء الكاشف والتي تزيد بشدة من الاستجابيه الضوئيه لكاشف اشعه تحت الحمراء البعيدة.خصائص الكاشف (الكشفيه , الربح ,الاستجابه , القدره المكافئه للضوضاء ) حسبت قبل وبعد عملية الطلاء بالبوليمر ووجد ان الربح يزداد بحدود 25 مره اكثر من النماذج غير المطعمة .بينما الكشفيه ازدادت من (cm.Hz^1/2)/W 107 الى 1011(cm.Hz^1/2)/W بعد طلائها بالبوليمر .النتائج اظهرت ان الاستجابيه تزداد اكثر من الاستجابيه لاغشيه الكاربون النانوية غيرالمطعمه وتصل الى 0.0177 A/W لنوع انابيب الكاربون متعدد الجدران من نوع شبه الموصل السالب المحضر بطريقه (drop by drop ) وبينما اعلى الكشفية النوعيه بعد اضافه البوليمرات المطعمه بالصبغه كانت 7.08*1011 (cm.Hz^1/2)/W في حالة انابيب الكاربون متعدد الجدران لنوع شبه موصل السالب محضر بطريقه (dip coating) .هذه القيم تعطي اثبات لتاثير البوليمر في تحسين خصائص كاشف التوصيل الضوئي الاشعة تحت الحمراء البعيدة تم التحقق من تاثير تغطية اوتطعيم افلام انابيب الكاربون النانوية بالبوليمر على زمن الاستجابة الكاشف ووجد ان زمن النهوض كان 1.42ms , زمن الاستجابية كان 2.14ms بينمزامن الهبوط كان 3.92ms . | In this study the infrared photoconductive detectors works at far infrared region and at room temperature were fabricated. The detector fabricated using four types of carbon nanotubes CNTs (MWCNTs, COOH - MWCNTs, short - MWCNTs and DWCNTs).The carbon nontubes suspension is deposited by dip coating and drop - casting techniques to prepare thin films of CNTs. These films are grown on porous silicon (PSi) substrates of n - type and p - type Si. The aluminum electrodes were evaporated on the CNTs film to fabricate the far IR detectors.The structural, morphological, optical properties and Hall measurements of the film were studied. The structure of the MWCNTs film is examined by X - ray diffraction (XRD) and found to be polycrystalline of hexagonal structure with strong orientation at (002). The AFM studies are focused on the characterization of the PSi - CNTs and found it had a good and uniform surface homegensity which gives a good indicator for formation of the MWCNTs over the nanospikes of Si. The average particle size was determined and found to be 87.05 nm. The scanning electron microscope (SEM) technique has been applied to study the morphology of the deposited MWCNTs film. The results shows that the film are homogeneous and does not have areas with clusters or cracks.The optical energy gap in the IR region was calculated from FTIR spectrum and found to be 0.12 eV. From Raman shift spectrum for the MWCNTs, it was found that the spectrum is dominated by three typical lines; D - band, and G - band, and RPM band. The D - line is located about 1561.62 cm - 1 which assigned to the disorder induced by defects and curvature in the nanotube lattice, while G - line is located about 1750 cm - 1 due to the in - plane vibration of the C - C bonds. The RPM band is located at 2700 cm - 1 . These bands can be used to evaluate the extent of any carbon - containing defects. The D/G intensity ratio was 1.135. FTIR spectrophotometer was used to study the infrared spectrum of CNTs, polymers and Methylene Blue dye, which appear that CNTs have good absorbance in the wavelength of 10.6 µm. This is mean that these materials are very good candidate for IR applications. Hall Effect measurements show that the carbon nanotubes deposited on porous silicon substrate has a p - type semiconductor behavior and high conductivity. The I - V characteristics and the photoresponsivity of the fabricated detector are measured at dark and under illumination for CNTs film by IR radiation from CO2 laser of 10.6µm wavelength and power of 2.2 and 2.5W. The photoresponse and figures of merit of the photoconductive detector is improved by coating (functionalized) the CNTs films with layer of 0.1 mm of the blend polyaniline, polymethylmeth acrylate and methylene blue dye. This type of polymer coating can be considered as a surface treatment of the detector film, which highly increases the photoresponse and specific detectivity of the fabricated CNTs IR detector. The figure of mertis (Rλ, G, NEP and D*) were calculated before and after functionalization process. It is found that is increased in about 25 time than that for uncoated samples, while the specific detectivity was increased from order of 10+7 (cm.Hz1/2)/W to 10+11 (cm.Hz1/2)/W after coated with polymer.These values give an improve for the effect of polymer on the enhancement of the performance of IR photoconductive detector. The effects of the coating CNTs film with polymer on the response time of the detector investigated and found that the rise time was 1.428 ms, response time 2.14 ms while the fall time was 3.92ms .

محاكاة الحل التحليلي لقدرة خرج ليزر ليف زجاج السليكا المطعم باليتاربيوم

اسم المؤلف: كنار نبيل جليل
اسم المشرف: مظهر شهاب احمد
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The current study included treating a theory of general derivation equation coefficients output laser's power ( ) by using the analytical solution of the rate equations that included the transition factor ( ), in which the losses scattering be neglected for a laser system when the active material is an optical fiber, its core is silica glass and Yb3+ - doped.While its resonant cavity it resonator Fabry - Perot, and it is pumping through one end of the optical fiber, while the Continuous Wave (CW) laser emission from the other end.In this study, it has been selected pumping wavelength ( 920*10 - 9m) and lasing wavelength ( 1090*10 - 9m) for this middle effective as an example of a typical plan to pump quasi four levels to find a numerical solution of the equation of the output laser which have been derived by programmable coefficients of this equation matlab language (version 8.1) this happened, after the coefficient ( ) has been calculated for all these laser transitions of this middle effective when it has been pumped ( ) as mention above.The simulation results for this laser system have presented that since the optical fiber is Single Clad Fiber (SCF) and a design of (Lycom ) type, it has been found that the concentration of the type (CorActive) is the highest value for obtaining high efficiency.The laser output power ( ) has been drops linearly by the increasing of core optical fiber radius, while it increases linearly with the increasing of the length of optical fiber, the laser output mirror reflectivity, pumping power, it is the highest values when using the optical fiber Single Mode (SM).In case of the optical fiber is Double Clad Fiber (DCF) and the design of type Large Mode Area (LMA), the ( ) decreases with increasing radius of the core of the optical fiber, while increases with each of the length of optical fiber and pumping power.In addition to that it has been found that ( ) increases linearly with the increasing pumping power whether the inner clad fiber shape is a Rectangle or Square or Circular, and that, the value of laser output power and efficiency are higher in the case of a Rectangular shape.

تحضير SnO2 النانوي ودراسة تاثير التشويب على الخواص التركيبية والبصرية Preparation SnO2 nanoparticles and Study the Effect of Doping on Structure and Optical Properties

اسم المؤلف: كرار امين قدوري محمد
اسم المشرف: طارق عبد الرضا علوان الظاهر
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا البحث تحضير مسحوق SnO2 النانوي النقي المحضر من املاح القصدير المتمثلة بملح SnCl4.5H2O بطريقة الصول - جل بثلاثة مذيبات مختلفة وهي الماء، والميثانول، والايثانول، وتم اجراء عملية التلدين عند درجة حرارة (400°C) .تم اختيار المذيب الايثانول لاعطائه اكبر كمية من المسحوق ومطابقته للملف ذي الرقم (JCPDS : 41 - 1445) لتحضير العينات المشوبة (بالنيكل والمغنيسيوم والكادميوم) كل على انفراد وبثلاثة تراكيز (5, 10 و%15) من كل عنصر ثم اجريت عملية تلدين لهذه العينات لدرجة (700°C).اظــهرت نتائج حـيود الشعاع السيني ان جــميـع العينات المحـضـرة تمتلك نظاما رباعيا متعددة التبلور وفحصت العينات للمدى الزاوي (°20 - °100)، وظهرت السطوح الاربعة الاعلى شدة وهي ((110, (101), (200), 211))، تم حساب الحجم الحبيبي بطريقة ديباي - شيرر وبطريقة وليامسون - هول، وبينت النتائج ان حجم الحبيبات يقل بزيادة نسبة التشويب، كما تم حساب العديد من المعلمات التركيبية كثوابت الشبيكة وفسحة السطوح، والكثافة، والمساحة السطحية النوعية، وعدد خلايا الوحدة، وكثافة الانخلاعات، والاجهادات المجهرية وعامل التشكيل وعامل طبيعة السطح. اوضحت نتائج فحوص (AFM) طبيعة السطح للعينات المحضرة، وقد تم حساب معدل الحجم الحبيبي، ومعدل الخشونة، وقيمة جذر مربع المعدل(RMS) وكانت مختلفة من حيث معدل خشونة السطح. حيث تقل الخشونة بزيادة نسبة التشويب، ويقل معدل قطر الحبيبات بزيادة نسبة التشويب التي اتفقت مع نتائج حيود الشعاع السيني وكانت تتراوح ما بين (127.71 - 69.64) nm، وقد اظهرت صور (SEM) ان اشكال الحبيبات النانوية للنماذج (P4,N3,M3,C3) كروية او شبه كروية متجمعة بهياة عناقيد وظهر البعض منها بشكل متكتل. اما بالنسبة لفحص (EDX) فقد اظهرت جميع العينات قمة عالية عند ~3.5) keV) للقصدير مع ظهور قمم صغيرة لعنصر الكلور والبوتاسيوم التي عدت كشوائب بنسب وزنية ضئيلة جدا نتيجة عملية التحضير للعينة النقية، اما العينات المشوبة فقد اظهرت قمم مادة التشويب بالاضافة الى القصدير الا ان الاوكسجين لم يظهر في فحص (EDX).ومن خلال تسجيل طيـف الامتصاص لمحلول SnO2 وضـمن مــدى الاطــوال الموجـية (300 - 900 nm)، اوضحت النتائج ان الامتصاصية تزداد بزيادة نسبة التشويب لجميع العينات، اما فـجـوة الـطاقة البصرية للانتقال الالكتروني المباشر الـمـسـمـوح باستعمال معادلة (Tauc) وباستخدام معادلة (Kubelka - Munk) فقد وجد انها تقل بزيادة نسبة التشويب. | In this research, pure SnO2 Nanopowders were prepared from tin salt (SnCl4.5H2O) by sol - gel method using three different solvents; water, methanol and ethanol. The preparered powders annealed at temperature (400°C). according to the result of prepared powder, the sample of ethanol as a solvent is taken into consideration due to the greater amount of the powder is produced and it’s in a good agreement with the File No. (JCPDS : 41 - 1445). The preparation of doped samples is performed using ethanol as a solvent with each one of the dopants (Nickel, Magnesium and Cadmium) with three percentages (5, 10 and 15)% of each element. Then nine prepared doped samples as well as the pure one were annealing at (700°C).XRD results show, all prepared samples have polycrystalline tetragonal crystal system. The scan of x - ray in the range of Bragg’s angle (20 - 100)° which revealed the four highest intensity peaks, (110),( 101),( 200) and ( 211)planes. From the diffraction pattern of each sample, the crystallite size is calculated by Debye - Sherrer and Williamson - Hall methods. Their results showed that grain size decreases with increasing ratio of doping concentration, also there has been many parameter likes; lattice constants, interplanar distance, specific surface area, number of unit cells, intensity, dislocations density and macrostrain which are calculated. AFM test revealed the morphology of the prepared samples. Their grain size, roughness and average root mean square value (RMS) are different for each sample. Surface roughness decreased with the increase of the dopant percentage. The average grain size was ranging between (69.64 - 127.71) nm and is decreased with the increase of dopant percentage and this show a good agreement with the XRD results. SEM for the sample (P4, N3, M3 and C3) revealed spherical or semi - spherical nanoparticles agglomerate in the form of a cluster. While EDX test shows a high peak at (~ 3.5)KeV of the Tin, with small peaks of chlorine and potassium which are considered as impurity and that is due to its small quantity which is resulted from the process of preparation of pure sample. In the doped samples, the peaks of dopant elements appeared in addition to that of tin, but the oxygen does not appear.UV spectra for all samples are performed by dissolving some amount of the powder in the double distilled water in the range (300 - 900) nm, their results show the absorbance increases with the proportion of dopant concentration of all samples. The optical energy gap for allowed direct transition are calculated by using Tauc and Kubelka - Munk equations, which decrease with the increase of dopant percentage.

تاثـيـر الـتـعـويـض Gd وBa عـلى خـواص التوصيـلية الفائـقـة للمركب Bi1.6Pb0.4Sr2 - yBayCa2 - xGdxCu3O10+ ? Effect of Gd and Ba Substitution on the Superconducting Properties of Bi1.6Pb0.4Sr2 - yBayCa2 - xGdxCu3O10+ ? Compounds

اسم المؤلف: فــردوس شاكــر احـمـد
اسم المشرف: ندى خضير عباس لمياء خضير عباس
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم تحضير المركبات Bi1.6Pb0.4Sr2 - yBayCa2 - xGdxCu3O10±δ ولقيم (0≤x≤0.5) و(0≤y≤0.3) بطريقة تفاعل الحالة الصلبة التقليدية. كما درس تاثير التعويض الجزئي بـ Gd محل Ca والـ Ba محل Sr على التوالي على خواص التوصيلية للمركب بواسطة مطياف حيود الاشعه السينية (XRD)، مطياف الماسح الالكتروني (SEM )، مطياف تفريق طاقه الاشعه السينيه (EDX)،حساب محتوى الاوكسجين في المركب وقياسات المقاوميه الكهربائية DC. ان ظروف التلبيد المثلى للمركب النقي درجة حرارة تلبيد مساوية الى 850 درجة مئوية وبفترة زمنية 140 ساعة مع تبريد العينات في الهواء.استخدمت تحليلات الاشعة السينية EDX لفحص نسبة العناصر المكونة للمركب Bi1.6Pb0.4Sr2 - yBayCa2 - xGdxCu3O10±δوطاقاتها وقد تمت المقارنة بين تراكيز العناصر في العينات التي اظهرت حالة التوصيل الفائق. بينت تحليلات حيود الاشعة السينية لجميع نماذج فائقة التوصيل انها تمتلك طورين الطور الفائق التوصيل العالي (2333)BiPb - والطور الفائق التوصيل الواطئ (2212)BiPb - مع وجود طور الشوائب. وان جميع العينات لها تركيب معيني قائم. كما تم حساب ثوابت الشبيكة، النسبة المئوية لوجود الطور العالي (2333)BiPb - للعينات وكذلك كثافتها كما وجد بان قيمة الثابت البلوري (a) تزداد مع زيادة نسبة الكادلنيوم بينما تقل قيمة الثابت البلوري (c).بينت قياسات المقاومية الكهربائية ان قيمة درجة حرارة الحرجة Tc تقل مع وجود التعويض. وهذا الهبوط في قيمة Tc يشير الى ان الاخماد في خاصية التوصيل المفرط في النماذج المعوضة بـ Gd وBa يكون اقل من النماذج المعوضة بـ Gd فقط. قيمة درجة حرارة الحرجة Tc في النماذج المعوضة بـ Gd باعلى من 0.2 تقل الى 100.5 K، بينما قيمة محتوى الاوكسجين يقل. زيادة تركيز الـ Gd الى x≥0.3 يؤدي الى انتاج نماذج شبه موصلة.كما وجد ان التعويض بـ Gd وBa معا ادى الى تحسين قيمة الـTc الى 102K عند x=0.2 وy=0.1. كما ان قيمة المقاومية تقل قليلا لكنها لا تصل الى القيمة الصفرية لانها تتصرف بسلوك شبه فائق التوصيل.استخدم المجهر الالكتروني الماسح SEM لمعرفة طبيعة السطح لطور التوصيلية الفائقة وكذلك لبحث تاثير التعويض بـ Gd فقط واظهرت النتائج تواجد تراكيب على شكل صفائح والتي تميز انماء الحبيبات للطور BiPb - (2223) العالي. حيث تبدو الحبيبات نوعا ما كثيفة ومترابطة جيدا.اذ ان هذه الحبيبات في النماذج المعوضة بـ Gd فقط تكون اكبر حجما ومختلفة جدا. اما اتجاهاتها فيبدو اقل عشوائية مع نقصان الفراغات. اضافة Ba يؤدي الى زيادة الفراغات والتي تزيد من المسافة بين الحبيبات.تم تعيين الحجم الحبيبي للنماذج المحضرة باستخدام مايكروسكوب القوى الذرية (AFM)، كما تم تعين الخشونة كداله لنسب التعويض ايضا. | A series of the compounds with nominal composition Bi1.6Pb0.4Sr2 - yBayCa2 - xGdxCu3O10±δ with (0≤x≤0.5) and (0≤y≤0.3) were prepared by the conventional solid - state reaction method. The influence of gadolinium and barium substitution at Ca and Sr sites respectively on the superconducting properties, have been investigated by the X - ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive x - ray spectroscopy (EDX), oxygen content and DC electrical resistivity measurements. The optimum sintering temperature for the pure composition is 850˚C and sintering time is 140h by two steps.Energy dispersive x - ray spectroscopy (EDX) analyses was used to test the proportions of the elements of the compound of Bi1.6Pb0.4Sr2 - yBayCa2 - xGdxCu3O10±δ.X - ray diffraction analysis revealed that there exists two phases i.e. BiPb - (2223) and BiPb - (2212), in addition to the impurity phases. It was found that the crystal structure was orthorhombic. Parameter values, the volume fraction of the (2223) - phase of prepared samples and their densities have been calculated. It was found that the lattice parameter value a increase with the increase of Gd content, while the lattice parameter value c was decreased. Electrical resistivity measurements show that the value of the superconducting critical temperature Tc decrease with the supstitutions content. The depression of Tc indicates that the suppression of the superconductivity in Gd and Ba substituted samples is lower than that Gd substituted only.Substitution of Gd up to 0.2 will decrease the transition temperature to TC=100.5 K, while excess oxygen content decreases. Increasing of Gd content to x≥0.3 produced semiconductor samples. It has been found that substitution of Gd and Ba together enhance TC to 102 K at x=0.2 and y=0.1. The resistivity decreases slowly but does not become zero even at the boiling point of liquid nitrogen but it behaves like a superconductor. The morphology of the samples obtained by SEM of the sample substituted with Gd only shows the layered structure which characterizes the growth of BiPb - (2223) grains. The grains appear rather dense and well connected.The grain in samples containing Gd only have a larger size and aspect very different. Their orientation seems less random and porosity even smaller. The addition of Ba appears to increase the porosity which manifested in large space between the grains. The grain size of samples were determined by atomic force microscope (AFM) techniques, the roughness were also determined

دراسة نظرية حول الاستطارة الالكترونية للنظائر 70Ge, 72Ge, 74Ge and 76Ge Theoretical Study of Electron Scattering From 70Ge, 72Ge, 74Ge and 76Ge Isotopes

اسم المؤلف: فرح فارس قدوري
اسم المشرف: الطاف عبد المجيد الرحماني
الموضوع العام: علوم الفيزياء
السنة: 2017
الموضوع الدقيق: فيزياء الالكترونيات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم حساب توزيعات زخوم البروتونات وعوامل التشكل للاستطاره الالكترونيه المرنه F(q) للحاله الارضيه لبعض النوى الزوجية الواقعه ضمن القشرة 2s - 1d ( 72Ge, 70Ge 74Ge بالاضافة الى 76Ge) وفقا لانموذج تموج الكثافه المترابط الذي يعبر عنه بدلالة دالة التموج . والتي بدورها تحسب بواسطة توزيعات كثافة البروتونات اولا من النتائج النظريه مستخدمين الدوال الموجيه للمتذبذب التوافقي البسيط مفترضين ان عدد الاشغال للمستويات في النوى الحقيقية تختلف عنها في انموذج القشره البسيط وثانيا وضحت توزيعات زخم البروتونات من التجارب العمليه.تميزت نتائج توزيعات زخوم البروتونات المستخرجه من انموذج تموج الكثافه العملية والنظرية بخاصية الذيل الطويل (Long tail) عند قيم الزخوم العاليه بعكس نتائج توزيعات زخوم البروتونات المحسوبه بواسطة نموذج القشرة باخذ تحويلات فوريرللدوال الموجيه للمتذبذب التوافقي التي تتميز بخاصية الميل الانحداري (Steep slope) عند قيم الزخوم العاليه.اظهرت هذه الدراسة بان النتائج النظريه لعوامل التشكل المرنه F(q) المحسوبة وفقا لانموذج تموج الكثافه المترابط تتفق مع النتائج العمليه ,حيث ان هذا الانموذج يعكس التوزيع الحقيقي لتوزيعات زخوم البروتونات وعوامل التشكل المرنه للنوى قيد الدراسه . كما تم حساب الفرق بين توزيع كثافة البروتون لكــل من (72Ge, 70Ge) و74Ge, 72Ge)) و( (76Ge, 74Ge لتوضيح تاثير اضافــة النيوترونات على توزيع كثافة البروتون. | The proton momentum distributions and longitudinal scattering electron form factors F(q), for the ground states for even mass nucleus in the 1f - 2p shell, like (70Ge,72Ge,74Ge and 76Ge) isotopes, have been calculated used framework coherent density fluctuation model which is based on the used the weight function . This can be passed in terms of the proton density distribution of the nuclei. The proton density distribution have been resolved by two ways : firstly from the theoretical consideration calculated by means of the harmonic - oscillator wave functions on the supposition that the occupation numbers of the status in realist nuclei variation from the predictions of the simple shell model and secondly the proton density distributions determined from the experiments. The countenance of the lengthy - tail behavior at height momentum area of the proton momentum distribution have been got by the experimental and theoretical weight function on inversion to the results of the proton momentum distribution calculated in the shell model by taking Fourier transform to the harmonic - oscillator wave functions that are fundamentally characterized by the steep slope behavior at high momentum values. The results of the elastic form factor calculated in the coherent density fluctuation model in reasonable endorsement with empiricist data. This proves reality about this model in calculating the proton momentum distribution and elastic electron scattering form factor of nuclei under study. The difference of the proton density distribution of (70Ge - 72Ge), (72Ge - 74Ge) and (74Ge - 76Ge) isotopes have been calculated to illustrate the influence of the extra two neutrons on the proton density distribution.

دراسة الخصائص التركيبية والكهربائية لمركبات الباريوم تيتانيت المطعمة بالكالسيوم والسترونتيوم النانوية المحضرة بطريقة السول - جل ذات الاحتراق التلقائي Studying Structural, and Electrical Properties for Nano Barium Titanate doped with (Ca,Sr) prepared by Sol - Gel Auto Combustion Method

اسم المؤلف: فراس محمد طعمة عباس الجبوري
اسم المشرف: فاروق ابراهيم حسين قادر
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: حضرت مركبات الباريوم تيتانيت النانوية (Ba1 - xSrxTiO3) لقيم (x=0,0.26,0.28,0.30,0.32,0.34) Ba1 - xCaxTiO3،للقيم (x=0.2,0.4,0.6,0.8)باستعمال طريقتين مختلفتين, الطريقة الاولى جديدة تستعمل لاول مرة وهي طريقة السول - جل ذات الاحتراق التلقائي، والثانية طريقة السول - جل ،ثم اجريت عليها الفحوصات والدراسات التركيبية والكهربائية. اظهرت نتائج الخواص التركيبية تشكيل الطور الرباعي ووجوده في جميع العينات المحضرة بالطريقتين، على الرغم من استبدال ايون (Ba+2),بالايون (Sr+2), والايون (Ca+2),في كلا المركبين, كذلك بينت نتائج عملية الفهرسة البرمجية باستعمال برنامج (FULL PROF)، جودة عملية التصفية(GOF),اذ كانت قيمها اكبر من الرقم(1)،لجميع العينات كما تبين نقصان كل من معلمات الشبيكة وحجم خلية الوحدة والكثافة النظرية والحجم الحبيبي للعينات بزيادة تركيز الايون (Sr+2)،والايون(Ca+2)، في كلا المركبين المحضرين مع بقاء نسبة الرباعية (c⁄a) بقيت اكبر من الرقم(1) في كل العينات. وعند دراسة خواص العزل الكهربائي سببت زيادة تركيز ايون (Sr+2)، وايون (Ca+)،زيادة ثابت العزل الكهربائي ونقصان كل من معامل الفقد العزلي والتوصيلية الكهربائية المتناوبة بثبوت العوامل الاخرى مثل درجة الحرارة والتردد وسمك العينات وتغيرها الواضح مع التردد(50Hz - 1MHz) كذلك سببت زيادة تركيز ايون (Sr+2)، وايون (Ca+)،نقصان التوصيلية الكهربائية المستمرة وزيادة متانة العزل الكهربائي للعينات المحروقة بدرجة (1100ᴼC) لمدة (4h) والمحضرة بطريقة السول - جل ذات الاحتراق التلقائي.بينت نتائج الفحوصات الكهربائية وفحص متانة العزل الكهربائي ان النسبة (X=0.30)، ذي الصيغة الكيميائية (Ba1 - xSrxTiO3)،والنسبة (X=0.6)، ذي الصيغة الكيميائية(Ba1 - xCaxTiO3)، تمتلكان اكبر ثابت عزل كهربائي واكبر متانة عزل كهربائي ،واقل معامل فقد عزلي ،واقل توصيلية كهربائية متناوبة ومستمرة ،عليه فانهما افضل نسبتين تم تحضريهما لاول مرة | In this research, Nano Barium titanate ,(Ba1 - xSrxTiO3) of values ,(x=0,0.26,0.28,0.30,0.32,0.34),and (Ba1 - xCaxTiO3)values(x=0.2,0.4,0.6,0.8) were synthesized using two different methods ,the first was a new method used for the first time, in synthesized aforementioned titanate compounds, which sol - gel auto - combustion method, and the second was sol - gel method , then the structural and electrical properties were studied. The Structural results showed presence and forming the Tetragonal Phase in all samples,though,the Substitution(Ba+2) ion with (Sr+2)and(Ca+2)ions, the results of the software indexing by (FULL PROF),program showed goodness of fitting(GOF) greater than(1),also the results showed that lattice parameters, Volume, theoretical Density and grain size decreased when the concentration of(Sr+2)and(Ca+2)ions increased in both compounds and the Tetragonality ratio (c/a) remained greater than the number (1) in all samples. When examining the dielectric properties increasing of (Sr+2) and(Ca+2) ions concentration caused increased in Dielectric Constant and decreased Dielectric loss factor, alternating electrical conductivity certified the other factors such as temperature, frequency and the thickness of the samples and change clearly with frequency (50 Hz - 1MHz),also increasing of (Sr+2) and(Ca+2) ions concentration caused decreased in direct electric conductivity and increased Dielectric Strength for the samples that fired at (1100ᴼC) for (4h) and prepared by Sol - gel auto - combustion method . The results of electrical tests and examination of the Dielectric Strength showed that ratio (X =0.30), with the chemical formula (Ba1 - xSrxTiO3), and the ratio (X= 0.6), a chemical formula (Ba1 - xCaxTiO3), possess the largest Dielectric Constant and greater Dielectric Strength, and lower Dielectric loss factor, and less alternating electrical conductivity and direct electric conductivity, so they were the best two ratios, prepared for the first time by sol - gel auto - combustion method that can be used in many applications

تصميم منظومه تفريغ حاجز الجهد العازل ودراسه تاثير البلازما غير الحراريه المنتجه في الضغط الجوي على بعض خصائص كاشف الاثر النووي CR - 39 Design of Dielectric Barrier Discharge and Study the effect of Atmospheric Pressure non thermal Plasma on some Properties of CR - 39 track Detectors

اسم المؤلف: فاطمه علي خضير
اسم المشرف: حامد حافظ مربط
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: فيزياء البلازما
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الدراسة تم تصميم وتصنيع منظومة تفريغ حاجز الجهد العازل Dielectric Barrier Discharge تعمل هذه المنظومة على انتاج البلازما غير الحرارية عند الضغط الجوي الاعتيادي، تتالف المنظومة من قطبين مصنوعين من الستانلس ستيل بقطر(50ملم) ومعزولين بمادة التفلون بقطر (10) ملم,القطب الاعلى ثابت والقطب الاسفل مثبت على منصة قابلة للحركه للاعلى والاسفل لاجل تغير المسافه مابين الاقطاب. تم استخدام نوعين من المواد العازله بين الاقطاب : الزجاج والتفلون وباسماك مختلفه لكلا المادتين (1,2,3) mm وذلك لغرض المقارنه. تم دراسة خصائص المنظومة الكهربائية من رسم منحني تيار - فولتية وفولتية الانهيار الصامت لكل مادة عازلة ولثلاثه مسافات فاصلة بين الاقطاب (1,2,3 mm). حيث وجد انه بزيادة المسافة بين الاقطاب من (1الى 2الى3) ملم تزداد فولتية الانهيار. كذلك وجد ان قيم التيار تزداد بنقصان المسافة بين الاقطاب ،وكذلك شملت هذه الدراسه تاثير سمك الماده العازله المستخدمه على فولتيه الانهيار وقد وجد ان زياده سمك الماده العازله تؤدي الى زياده قيمه فولتيه الانهيار.وقد تم ايضا دراسه تاثير تردد فولتية التفريغ على قيم تيار التفريغ باخذ قيم التردد (50, 1000, 500, 750, 1250) هيرتز . تم دراسة تاثير البلازما الغير حراية الناتجة من المنظومة على كاشف الاثر النووي الصلبه، حيث تم تعريض كاشف الاثر النووي من نوع CR - 39 المشعع بجسيمات الفا من مصدر الفا ( الراديوم - 226) الى البلازما الناتجة من المنظومة لفترات زمنية (60 - 1) ثانية، وقد وجد ان اثار جسيمات الفا على الكاشف تظهر بعد ( 10) ثانية من تعريض الكاشف للبلازما وتزداد كثافة الاثار على الكاشف بزيادة زمن التعريض الى ان تصل لقيمتها العظمى عند الزمن (50) ثانية ثم تبدا بلاختفاء. | In this study the design and manufacture of Dielectric Barrier discharge system was done. This system works to produce non - thermal plasma at normal atmospheric pressure. It consists of two electrodes made of steel (stainless steel) with radius (50mm) and isolated with Teflon of radius (10mm), the upper electrode is fixed and the lower is plaud on a movable stand that can move upper and lower to control the distance between the electrodes. Two types of isolated materials are used between the electrodes with different thicknesses. The properties of the designed system was studied from the current - voltage characteristics curve and silent discharge voltage for every insolate matter and for three distances between electrodes (1,2,3)mm. It is found that with increasing the distance between the electrodes from (1 to 2 to 3) mm discharge voltage increases and it's also found that the value of current increases with decreasing distance between electrodes.This study also included the study of the effect of the insolated matter thickness on discharge voltage. It's found the increasing of the isolated matter thickness lead to increase the value of discharge voltage and we also studied the effect of frequency of discharge voltage on the value of discharge current for different values of frequency (50,500.750.1000.1250) HZ.The effect of non - thermal plasma that was produced from the system on Solid State Nuclear Track Detectors has been studied where State Nuclear Track Detectors type CR - 39 radiated by alpha particle from alpha source (Radium - 226) is exposed by plasma produced from the system for time from (1 - 60 sec) it is found that the effect of alpha particle on detector is appears after (10) sec from exposure of detector to plasma and the number of tracks on detector will increase by increasing the time of exposure so it reach it's maximum value at time 50 sec and begin to disappear

تصنيع ودراسة الخصائص الفيزياوية لكاشف Bi2S3 المحضر بطريقة الـتحلل الكيميائي الحراري Fabrication and study the physical Properties of Detector Bi2S3 prepared by spray pyrolysis Technique

اسم المؤلف: غفران زحام جبر عبد
اسم المشرف: سعاد غفوري خليل العاني
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا البحث تحضير غشاء كبريتيد البزموث بطريقة التحلل الكميائي الحراري عند درجة حرارة قاعدة ثابته (300℃) وبتراكيز مولارية مختلفة 0.01 , 0.015 , 0.02) M) على قواعد من الزجاج والسليكون احادية التبلور (Single Crystal) من نوع n - type ذات اتجاهية بلورية عند المستوى (100) ومقاومية كهربائية (10 Ω.cm) ويتراوح سمك الغشاء بين (300 - 600 nm) . تمت دراسة الخواص التركيبية والطوبوغرافية والبصرية للغشاء حيث اظهرت نتائج حيود الاشعة السينية X - Ray ان اغشية Bi2S3 المحضرة متعددة التبلور وذات نظام معيني قائم (Orthorhombic) واعلى شدة كانت عند المستوي (031) , كما اظهرت النتائج البصرية ان قيم فجوة الطاقة تعتمد على التركيز المولاري حيث لوحظ ان قيم فجوة الطاقة تقل من 2.97ev الى 2.4 ev بزيادة التركيز المولاري , واظهر منحني النفاذية ان النفاذية تقل بزيادة التركيز المولاري كما ان منحني الامتصاصية اظهر نتيجه معاكسة لما هو في منحني النفاذية , وبينت دراسة الخصائص الكهربائية للاغشية المحضرة ان التوصيلية زادت بزيادة التركيز المولاري . بينت نتائج القياسات الكهربائية (I - V) لكاشف Bi2S3/Si ان مقدار عامل المثالية يزداد بزيادة التركيز المولاري حيث تراوحت قيمته بين (3.9 - 4.7) , وبينت نتائج الاستجابة الطيفية في مدى الطول الموجي (400 - 850 nm) انها تزداد بزيادة الطول الموجي لحد معين ثم تقل بزيادةλ كما لوحظ ظهور قمتين للاستجابية الاولى عند الطول الموجي (600nm) لغشاء Bi2S3 والثانية عند الطول الموجي (800 nm) للسيليكون وكانت اعلى قيمة للاستجابية كانت 2.52 A/W عند التركيز 0.015 M , وتم حساب الكفاءة الكمية للكاشف ولوحظ زيادة الكفاءة الكمية بزيادة التركيز المولاري وايضا ظهور قمتين عند الطول الموجي (600 nm) وعند الطول الموجي (800 nm) . وكذلك تم حساب الكشفية النوعية ولوحظ زيادة الكشفية بزيادة التركيز المولاري وان اعلى قيمة لها هي 4.6*109 (HZ1/2.W - 1.cm) عند الطول الموجي 600 nm وبتركيز (0.015M) . | In this research Bi2S3 thin film were prepared on glass and Silicon substrates single crystallization from p - type with crystalline directional (100), electrical resistivity (2 - 20Ω.cm) from N - type With crystalline directional (100) , electrical resistivity (10 Ω .cm) at thickness between (400 - 600 nm) using chemical spray pyrolysis method with constant temperature base (300 ℃) and molar concentrations (0.01, 0.015,0.02)M .The structural , topographic and optical properties were studied, the X - ray diffraction results showed that films polycrystalline and with Orthorhombic system Bi2S3 prepared and the highest intensity was at the level (031) , and the optical results showed that the energy gap depends on the concentration values molar where it was noted that the energy gap values increase from 2.4 eVto 2.97eV molar concentration increased , the transmittance curve showed that transmittance decreased with increasing molar concentration also absorbance curve showed the opposite of what is in the transmittance curve.The current - potential (I - V) measured results of Bi2S3 / Si detector value of the ideality factor increases with increasing molar concentration where its value ranged from(3.9 to 4.7), and showed the results of spectral response in the wavelength range(400 - 850 nm)it increases with the wavelength as observed appearance of two peaks of responsiveness, the first when the wavelength (600nm) to Bi2S3 film and the second at the wave length (800 nm) silicon and the highest value of responsivity when concentration 0.015 M.The quantum efficiency calculate of the detector and the observed increase quantum efficiency with increase molar concentration and also appearance of two peaks at the wavelength (600 nm) and at the wavelength (800 nm). As well as the specific detectvity calculate was observed increase detectivity with increased molar concentration and that the highest value is 4.6* 109 (HZ1/2.W - 1.cm) at wavelength 600 nm and concentration (0.015M

دراسة الخصائص التركيبية والكهربائية والمغناطيسية للفرايت النانوي ذي التركيب المغزلي المحضر بطريقة السول (NixCu0.2Zn0.8 - xFe2O4) - جل ذات الا حتراق التلقائي Studying Structural , Electrical and Magnetic Properties for Nano Spinel Ferrite of (NixCu0.2Zn0.8 - xFe2O4) Prepared by Sol - Gel Auto Combustion Method

اسم المؤلف: عمار عيسى عباس نجم الربيعي
اسم المشرف: احمد رفيق عبد المجيد
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: In this research , Nano spinel ferrite (NixCu0.2Zn0.8 - xFe2O4) was synthesized using sol - gel auto - combustion and flash combustion methods .Nineteen samples were prepared and their studies were divided into three parts. Study the effect of citric acid in preparation of Nano ferrite (Ni0.1Cu0.2Zn0.7Fe2O4) by changing the molar ratio of adding fuel to any sample and the five samples were prepared from (C series). The structural properties of samples were studied using x - ray diffraction technique (XRD) and scanning electron microscope (SEM) which showed that the obtained ferrite possesses spinel cubic phase for all used molar ratios , besides when the concentration of adding fuel was increased leads to decrease in grain size and theoretical density , increase in dislocation density and the surface area. Then the molar ratio (1 : 1 M) was chosen as the best adding ratio due to that the obtained ferrite at this ratio possesses best texture coefficient with small grain size and best internal strain by comparing with the other ratios.  Study the influence of substitute (Zn+2) ion by (Ni+2) ion on the structural , electrical and magnetic properties of Nano ferrite powder (NixCu0.2Zn0.8 - xFe2O4)(0.1≤X≤0.7) synthesized using sol - gel auto - combustion method , there are seven samples were prepared (A) series and tested by two types of structural test included analyzer x - ray diffraction and scanning electron microscope, the results exhibited forming the spinel phase for all samples in spite of the substitute of (Zn+2) ion by (Ni+2) ion, and the increase of (Zn+2) ions concentration leads to decrease in the grain size and increase in theoretical density. Then the ferrite powder was divided in two groups, the first was pressed into the pellet shape which was used in electrical tests and the second group was pressed into the rings shape which was used in magnetic tests. The two faces of the pellets in first group polished by silver paste material in case to obtain a ceramic capacitors that subjected to electrical tests which included the measurement of dielectric constant , dielectric loss coefficient, alternating electrical conductivity and direct electrical conductivity ,and the study of magnetic properties for the rings samples included measurement of hysteresis loop , selfinduction, initial permeability and the relative loss factor. The results of electrical tests exhibited decrease in dielectric constant with frequency increase at room temperature , and dielectric constant increases at certain ratios of adding (Zn+2) ions and decreases at other ratios. However , the dielectric loss coefficient its fall when increasing frequency until reaches its lowest value at the high frequencies values and so it is various when the concentrations of (Zn+2) ion were changed .and the measurement of alternating electrical conductivity displaying it increases with the increasein frequency and it values disparity with the change of (Zn+2)ion concentration , in other hand the direct electrical conductivity increase with substituting (Zn+2) ion concentration increases. The magnetic tests results exhibited that the ratio (X=0.3) with chemical formula (Ni0.3Cu0.2Zn0.5Fe2O4) possesses a significant magnetic properties when compared with other samples because it has the highest initial permeability with lowest relative loss factor and it has best hysteresis loop so that it realized conditions for using it as a cores in transducers and electrical motors. Study the influence of substituting (Zn+2)ion by (Ni+2) ion on the structural properties of Nano ferrite (NixCu0.2Zn0.8 - xFe2O4)(0.1≤ X≤ 0.7) synthesized using flash combustion method, there are seven samples were prepared (F) series tested by two types of structural tests included xray diffraction and scanning electron microscope tests , and the results exhibited form the spinel phase for all samples and no other phases were presented and observed that structural results were agreed with these obtained from sol - gel auto - combustion method.

تاثير جسيمات الفضة النانوية على الخواص البصرية لزجاج التليريوم المشوب بايونات العنصر الارضي النادر السماريوم effect of silver nanoparticles on the optical properties of glass Tellurium doping ions rare earth element Samarium

اسم المؤلف: عماد محمد احمد عبد الله المرسومي
اسم المشرف: طارق عبد الرضا علوان الظاهر
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The preparation of co - doping Tellurium glass of TeO2−B2O3−PbO by silver nanoparticles and Samarium were performed according 80TeO2−(7.5−x)B2O3−12PbO−0.5Sm+3−(x)Ag. where (x=0,0.05,0.1,0.15,0.2,0.25 mol%) by melting quench technique and annealed at 300°C for 3h as a first stage of this study.The prepared samples of glass ceramic with dimensions 1mmx1cmx2cm were characterized by XRD, SEM and TEM for their structural identification. UV - spectrophotometer in the wavelength (200 - 1100 nm ) Shimadzu and K - Mac SA miniature UV - VIS spectrometer - spectra were used for their absorption and fluorescence spectra.Patterns of XRD revealed amorphous structure for all sample. The element compositions were identified by TEM and EDX attached to SEM. Their densities 5.37 - 5.49 g/cm3 were measured by Archimedes experiment, and the corresponding molar volume were calculated in the range 29.7 - 29.1 cm−3.Their variation occur due to the molarity increase of doping.The absorption spectra revealed seven peaks which represented the transition from the ground state 6H5/2 to different excited states. The band gap for direct transition for all samples about 2.3 eV, while for indirect transition around 1.91eV.The highly doped sample named A5 is selected for fluorescence spectroscopy .It spectra showed five emission bands at 430(4G9/2➙4H5/2), 435(4G9/2➙4H7/2), 450(4G9/2➙4H7/2) , 600 (4I13/2➙4H9/ٕ)and 645(4 G 5/ٕ➙6H15/2) transitions. Then according to the resulted fluorescence spectra of it, two additional samples B1 and B2 were prepared with the same molar percentage as A5,but annealed at the same temperature for 6h and 9h. And two more sampleswere prepared by increases their molarity to 1% and 1.5% for both samarium and silver, symbolized by C1 and C2 respectively. The intensities of their fluorescence spectra increases many times for the same emission bands as it is compared with the same emission bands of A5.

القياسات والتقييم البيئي في منطقة الراشدية - بغداد Environmental Radioactivity of Al - Rashidiyah Site - Baghdad

اسم المؤلف: عدوية محسن علوان
اسم المشرف: راجحة رشيد محمود خالد هادي مهدي
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: فيزياء التلوث البيئي
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: الهدف من هذه الدراسة هو تقييم مستوى النشاط الاشعاعي الطبيعي في التربة والمياه والنبات والاسمدة والرواسب التي تم جمعها من مواقع مختلفة في منطقة الراشدية وذلك باستعمال تقنيتين الاول مطيافية اشعة γ وكاشف الجرمانيوم عالي النقاوة (HPGe) ذي الكفاءة 40% وقدرة تحليل 1.8keV وبطاقة 1.33MeV بالنسبة للكوبلت - 60، لقياس تراكيز اليورانيوم - 238، الثوريوم - 232 والبوتاسيوم - 40 بالاضافة الى السيزيوم - 137 وذلك للوقوف على المستويات الاشعاعية. اظهرت قياسات مطيافية اشعة γ النويدات المشعة الطبيعية (اليورانيوم - 238 والثوريوم - 232 والبوتاسيوم - 40) والصناعية (السيزيوم - 137) ، ان قيم الفعالية النوعية في نماذج التربة تراوحت من 12.3±0.7 الى 22.1±1 و8.2±1 الى 21.2±1.2 و226.3±15.3 الى 1325±54.8 و1.5±0.2 الى 10.5±0.6 بكرل/كغم على التوالي. اما قيم الفعالية النوعية في نماذج المياه فتراوحت من <MDA الى 4.4±0.4 و<MDA الى 0.8±0.1 و<MDA الى 23.7±3.7 بكرل/كغم على التوالي. وفي نماذج النبات فتراوحت من <MDA الى8.4±1 و<MDA الى 0.4±0.1 و<MDA الى 1691.3±73.7بكرل/كغم على التوالي. وفي نماذج الاسمدة فتراوحت من <MDA الى 12±1.14 و<MDA الى 8.5±2.1 و325.3±22.3 الى 1351.4±56.9 و1.4±0.39 بكرل/كغم على التوالي ، واخيرا في نماذج الرواسب فتراوحت قيم الفعالية النوعية من 13.2±0.65 الى 17.7±0.8 و10.2±0.5 الى 15.1±0.8 و250±13.4 الى 376.6±18.6 و0.9±0.2 الى 3.3±0.3بكرل/ كغم على التوالي. وتم مقارنة نتائج الدراسة الحالية مع قيم المعدل العالمي المسجلة. ولوحظ ايضا ان تركيز البوتاسيوم - 40 في بعض نماذج التربة والنبات والسماد اعلى من الحد المسموح به عالميا والتي تتراوح من 140 الى 850بكرل/كغم حسب تقارير UNSCEAR (2000). اما التقنية الثانية باستعمال عداد التناسب الغازي موديل S5XLB بفولتية 450V لقياس فعاليات اجمالي جسيمات الفا وبيتا وكاما ، فتراوحت تراكيزهم من 0.01 الى 0.7cpm و0.01cpm و0.7 الى 7.2cpm على التوالي بالنسبة لنماذج المياه. وفي نماذج التربة فتراوحت تراكيزهم من 0.83 الى 1.83cpm و18.53 الى 25.4cpm و3.5 الى 18cpm على التوالي. واخيرا في نماذج النبات فتراوحت قيم تراكيزهم من 0.01 الى 0.59cpm و2.1 الى 68.96cpm و2.9 الى 12.3cpm على التوالي. كما تم قياس معامل الانتقال بالنسبة للبوتاسيوم واليورانيوم فكانت القيم العليا في نبات الخس قد وصلت الى 1.8، 0.4 على التوالي ، بينما لوحظت القيم الدنيا لعامل الانتقال بالنسبة للبوتاسيوم في نبات التفاح ولليورانيوم في نبات القرع. | The aim of this study was to evaluate the level of natural radioactivity in soils, waters, plants, fertilizers and sediments collected from different locations in Al - Rashidiyah site using two techniques : the first is a hyper - pure germanium (HPGe) detector with a relative efficiency of (≥40%) and Resolution ≤1.8keV at energy of 1.33MeV for Co - 60 in order to determine the levels of radiation. The measurements of γ - ray spectroscopy showed the primordial radionuclides namely the 238U and 232Th decay chains and 40K, 137Cs. The values of specific activity in soil samples ranged from 12.3±0.7 to 22.1±1, 8.2±1 to 21.2±1.2, 226.3±15.3 to 1325±54.8 and 1.5±0.2 to 10.5±0.6 Bq.kg - 1, respectively. The values of specific activity in water samples ranged from <MDA to 4.4±0.4, <MDA to 0.8±0.1 and <MDA to 23.7±3.7Bq.kg - 1, respectively. In samples of the plant, they ranged from <MDA to 8.4±1, <MDA to 0.4±0.1 and <MDA to 1691.3±73.7Bq.kg - 1, respectively. In samples of the fertilizer, they ranged from <MDA to 12±1.14, <MDA to 8.5±2.1, 325.3±22.3 to 1351.4±56.9 and 1.4±0.39Bq.kg - 1, respectively. Finally, in sediment samples, they ranged values specific activity from 13.2±0.65 to 17.7±0.8, 10.2±0.5 to 15.1±0.8, 250±13.4 to 376.6±18.6 and 0.9±0.2 to 3.3±0.3Bq.kg - 1, respectively. The results of the current study have been compared with the world mean values specified by the UNSCEAR (2000). The specific activity of 40K in some of the soils, plants, fertilizers samples in the current study were found to be higher than the worldwide range of values which are 140 - 850 Bq.kg - 1 reported by UNSCEAR (2000). The second technique was done using gas proportional counter model Tennelec Series 5 (S5XLB) with voltage 450V to measurement gross alpha, beta and gamma activities, ranging from 0.01 to 0.7cpm, 0.01cpm and from 0.7 to 7.2cpm, respectively in water samples, from 0.83 to 1.83cpm, from 18.53 to 25.4cpm and from 3.5 to 18cpm, respectively in soil samples. At last, they ranged from 0.01 to 0.59cpm, from 2.1 to 68.96cpm and from 2.9 to 12.3cpm, respectively in plant samples. The transfer factor (T.F) for 40K and 238U was measured and the highest values observed in lettuce reached to 1.8, 0.4 respectively. While the lowest values were observed for the transition factor for potassium in the plant apples and uranium in the plant brassic.

تصنيع ودراسة خصائص كاشف المفرق الهجين CdO/Porous Silicon

اسم المؤلف: عبد الله محمود علي الجبوري
اسم المشرف: نادر فاضل حبوبي رائد عبد الوهاب اسماعيل
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا البحث، تم ترسيب اغشيةCdO على السليكون المسامي وعلى شرائح زجاجية بطريقة الاكسدة الحرارية السريعة(Rapid Thermal Oxidation) وذلك لدراسة الخصائص التركيبية والكهربائية والبصرية لهذه الاغشية. تم تصنيع كاشف المفرق الهجين نوع CdO/Porous Silicon من خلال الاكسدة الحرارية السريعة لمادة الكادميوم المرسبة على السليكون المسامي ,تم دراسة الخصائص الكهربائية والتركيبية والفولطائية الضوئية لهذه الكواشف من خللال قياسات تيار - جهد وسعة - جهد. تم استخدام التنميش الكهروكيمياوي للسليكون حيث تمت السيطرة على المسامية بتغيير كثافة تيار التنميش وزمن التنميش. لقد اوضحت النتائج ان معلمات الكاشف تعتمد بشكل كبيركثافة تيار التنميش وزمن التنميش. ان اقل قيمة لعامل المثالية التي تم الحصول عليه كانت 1.28 وذلك للكواشف المصنعة بكثافة تيار40 ملي امبير/سم2 وزمن تنميش 600 ثانية .لقد اوضحت نتائج الكفاءة الكمية اي الكواشف المصنعة تمتلك قمتين الاولى تمتص عند المنطقة المحصورة بين اوكسبد الكادميوم والسليكون المسامي اما المنطقة الثانية ناتجة بسبب الامتصاص عندالسليكون البلوري والسليكون المسامي. قيمة الكفاءة الكمية عند المنطقة الاولى كانت بحدود 77% عند الطول الموجي 550 نانومتر بينما الثانية كانت بحدود 88% عند الطول الموجي 700نانومتر. اعلى قيمة للكشفية النوعية كانت بحدود 87 عند الطول الموجي 550 نانومتر للكواشف المصنعة بكثافة تيار 30 ملي امبير/سم2 وزمن تنميش 2400 ثانية. كل الكواشف المصنعة تعمل للمدى الطيفي ( 400 - 900 ) نانومتر. اعلى قيمة لتياردائرة القصر كانت 19 مايكروامبير واعلى قيمة لفولتية الدائرة المفتوحة 420 ملي فولت للكواشف المصنعة. | In this work, CdO thin films are deposited on porous silicon and clean glass substrates by rapid thermal oxidation (RTO) to study structural, electrical and optical properties of these films. CdO/porous Si heterojunction photodetectors have been fabricated by rapid thermal oxidation (RTO) of Cd on porous and are presented. Structural, electrical, and photovoltaic properties of CdO/P - Si heterojunctions prepared by (RTO) on single - crystal p - type and monocrystalline silicon (111) substrates are examined with J - V the C - V methods. The electrochemical etching process was adopted as a technique to control the porosity of silicon wafer by controlling the time of etching in the range (600 - 2400s), and by controlling the etching current density. The results revealed that all our detectors’ parameters are highly dependant on etching time and etching current density. The minimum value of ideality factor is 1.28 for the detectors prepared with etching current density of 40mA/cm2 for 600s. The results of quantum efficiency show that these detectors have two depletion regions, the first one between CdO film and porous silicon layer, the second between the latter and the crystalline silicon. The first peak of quantum efficiency curve is 77% at a wavelength of 550nm while the second one is 88% at 700nm. The maximum specific detectivity was of wavelength 550nm for the detectors fabricated with etching current density of 40mA/cm2 and etching time of 2400s. All detectors are working on the spectrum region 400 - 900nm. The maximum Isc and Voc are 19A, 420mV respectively for the detectors fabricated with etching current density 30mA/cm2 and etching time 1200s

تصنيع دروع واقية من الاشعاع ودراسة بعض خواصها Manufacture radiation protection shields and study some of its properties

اسم المؤلف: عبد الرحيم ضياء ابراهيم
اسم المشرف: احمد فاضل مخيبر
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذه الدراسة تصنيع دروع واقية من مواد متراكبة مكونة من الايبوكسي كمادة اساس ومواد تدعيم مختلفة (C, Ni, PbO, Bi) وبنسب تدعيم متباينة % (10, 20, 30, 40, 50) وبابعاد cm (1 X 10 X 10) للوقاية من الاشعاع , ولغرض التعرف على مدى ملائمة هذه الدروع للاستعمال في مجال الوقاية من اشعة كاما, قيست بعض معلمات التدريع مثل معامل التوهين الخطي (μ), والعدد الذري المؤثر (Zeffe), وسمك النصف (X_(1/2)), ومعدل المسار الحر (λ_mean), والثقالة للطاقات KeV (121.8, 344.3, 662, 1773 ,1332, 1408) , بالاضافة الى عامل التراكم عند الطاقة 662 KeV , ولهذا الغرض تم استعمال منظومة كاشف ايوديد الصوديوم NaI (TI) مع مصادر مختلفة Eu - 152, Co - 60, Cs - 137. اظهرت النتائج ان هذه المعلمات تتاثر بتغير نسب التدعيم وطاقة اشعة كاما , حيث تبين ان زيادة نسبة التدعيم للدروع ادى الى زيادة كل من معامل التوهين الخطي والعدد الذري المؤثر. وفي المقابل يحدث نقصان قيم كل منهما خلال زيادة طاقة اشعة كاما للمصدر المستعمل . وبخاصة عند التراكيز العالية % (40, 50), والطاقات الواطئة< 0.662 MeV E_γ حيث سجلت قيم معامل التوهين الخطي cm - 1 (2.1726, 3.6161) للدروع المدعمة بالبزموث بنسبة تدعيم %40 و50% على التوالي ولطاقة 121.8 KeV, ولطاقة 344.3 KeV ولنفس التركيزين ايضا cm - 1 (0.36521, 0.4005) على التوالي, اما عامل التراكم فقد وجد انه يقل بزيادة التركيز عند طاقة معينة. اما بالنسبة لسمك النصف ومعدل المسار الحر فقد وجد ان سمك النصف يقل بزيادة التراكيز وبخاصة عند التراكيز العالية وكذلك الحال بالنسبة لمعدل المسار الحر. كذلك تم قياس قيم الثقالة للدروع كافة بالنسبة لعنصر الرصاص, حيث وجد من خلال قيم الثقالة ان هذه الدروع اخف وزنا من مادة الرصاص, مما يجعلها مفضلة على المواد التقليدية مثل الرصاص والكونكريت. واما بالنسبة لكفاءة الكاشف فقد وجد انها تعتمد في قيمها على مادة الدرع ونوعه وكذلك على قيمة الطاقة المستخدمة. وبينت الدراسة ان هناك توافقا جيدا بين القيم العملية والنظرية. | In this study, protection shields has been preparated , consist of composite materials have epoxy as a basis material and different reinforcing materials (C, Ni, PbO, Bi), with different reinforcing ratios (10, 20, 30. 40, 50) %, and dimensions (1 X 10 X 10) cm to protect from radiation, for examination the suitability of using this shields to protect from gamma ray, some shielding parameters was calculated like Linear attenuation coefficient (μ), Effective atomic number (Zeffe), Half layer thickness (X_(1/2)), Mean free path (λ_mean), and Heaviness for energies (121.8, 344.3, 662, 1773 ,1332, 1408) KeV , in addition to build up factor at 662 KeV, for this purpose sodium iodide system NaI(TI) was used with deferent radiation sources Eu - 152, Co - 60, Cs - 137.The results show that this parameter effected by the reinforcing ratio and gamma ray energy, it was found the linear attenuation coefficient and atomic effective number increases with reinforcing ratio increases, and decreased with energy increasing. Specially with high concentrations (40, 50) % and at low energies E_γ < 0.662 MeV, Since the values of linear attenuation coefficient for shields which reinforcing by bismuth with concentrations (40%,50) was (2.1726, 3.661) respectively for 121.8 KeV, and for energy 344.3 KeV for same concentrations is (0.36521, 0.4005) respectively. The build up factor was found decreased with reinforcing ratio increases, with certain energy.As for the Half layer thickness and mean free path, it was found that the Half layer thickness decreased with energy increasing specially at high concentrations, as well as the Mean free path.Heaviness was calculated too for all shields with respect to lead, from its values, we found that this shields lighter than lead, which make it preferable to traditional material such as lead and concrete.As for the detector efficiency, it was found to be dependent on the type of shield material and the value of used energy which used. This study showed that there is good agreement between the experimental and theoretical values of total attenuation coefficients

الخواص الكهربائية والتركيب الدقيق لمقاوم اوكسيد الخارصين السيراميكي المتغير المطعم بالاتربة النادرة Electrical Properties & Microstructure Of ZnO - Based Varistor Ceramics Doped With Rare Earth

اسم المؤلف: عادل اسماعيل كاظم
اسم المشرف: ايسر جمعة ابراهيم عبد الحميد رحيم مهدي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يعد اوكسيد الخارصين (ZnO) السيراميكي مادة شبه موصلة نوع - n، ويلعب دورا هاما في مدى واسع من العمليات الصناعية والمنتجات التجارية.ان من اكثر الاستعمالات اهمية استعماله لحماية الدوائر الكهربائية والمعدات الالكترونية من الجهد الزائد المدمر نتيجة البرق او الناتج من الارتفاع الكبير والمفاجيء في قيم الجهد الكهربائي, وتسمى المقاوم المتغير المعدني (Metal Oxide Varistor MOV) . يعد المقاوم المتغير نبيطة ذات سلوك غير اومي وخواصه الكهربائية تشبه تقريبا في عملها ثنائي زينر. لغرض دراسة وتوصيف مركبات مقوم اوكسيد الخارصين السيراميكي المتغير وتحسين خواصه الكهربائية, تم تحضير مركباته باضافة بعض الاكاسيد المعدنية وهي Bi2O3، Sb2O3، Co3O4، Cr2O3، وMnO2, حيث تم اختبار تاثيرها لوحدها اولا, وثانيا تم اضافة اكاسيد الاتربة النادرة (M2O3) مع الاكاسيد المذكورة اعلاه واختبار تاثيرها على المقاوم المتغير, حيث ان (M=Dy, La,Y) وبتراكيز مولية ( *10 - 3(1,5,10)).تمت عمليات التحضير والسيطرة على التركيب الدقيق عن طريق التحكم بظروف عمليات الحرق بدءا من عملية الاعداد بخلط اوكسيد الزنك مع الاكاسيد المضافة ومن ثم الحرق في درجة حرارة 600℃ وبمعدل 5 ℃⁄min في الفرن ولمدة ساعتين للعينات جميعها وذلك لازالة الغازات والرطوبة من المساحيق. بعد عملية الحرق تم كبس المساحيق بشكل اقراص بقطر 15mm وسمك 2mm تقريبا تحت ضغط يساوي 25MP.بعد عملية الكبس اجريت عملية التلبيد (تفاعلات الاطوار الصلبة والاطوار السائلة) بدرجات حرارة مختلفة ( 1050, 1100, 1150 ℃ ) وزمن ثابت للعينات جميعها مقداره ساعتين للحصول على الاشكال النهائية والوصول الى الخصائص المطلوبة.تمت دراسة بعض الخواص الفيزيائية للعينات المحضرة وهي الكثافة والمسامية والخواص التركيبية وذلك لغرض تقييم تاثير الاكاسيد المضافة وظروف التحضير على سلوك التطبيق الصناعي للعينات.وقد تبين ان مقدار الكثافة النسبية والمسامية تتاثر بدرجة حرارة التلبيد وبنسب تراكيز اكاسيد الاتربة النادرة المضافة ونوعها,فقد ازداد مقدار الكثافة بازدياد درجة حرارة التلبيد ونسبة او تركيز اكاسيد الاتربة النادرة المضافة ونتيجة لذلك فقد نقص مقدار المسامية.لقد اعطى اختبار التركيب المجهري للمادة المحضرة رؤية واضحة عن الانتشار والنمو الحبيبي , وان نتائج اختبار الاشعة السينية (XRD) اوضحت ان التركيب البلوري لها معيني قائم كما ان قيم (a, b, c) وحجم خلية الوحد قد ازداد بزيادة درجة حرارة التلبيد ونسب تراكيز الاكاسيد المضافة ونوعها.اظهرت الحبيبات النانوية والميكروية ضمن البحث الحالي تاثيرا كبيرا على الخصائص الكهربائية المدروسة والتي صممت لها اداة في المختبر لقياس معامل السلوك اللاخطي, مقدار جهد الانهيار , تيار التسرب, قابلية امتصاص الطاقة , انحدار الجهد وجهد الحدود الحبيبية.حيث تبين ان معامل السلوك اللاخطي يزداد بازدياد تركيز الاكاسيد المضافة وارتفاع درجة حرارة التلبيد ومن ثم يبدا بالنقصان بعد درجة (1100℃) بسبب تطاير وتبخر اوكسيد البزموث وطور(. (Zn7Sb2O12 بينما نقص مقدار جهد الانهيار وقابلية امتصاص الطاقة وانحدار الجهد بازدياد درجة حرارة التلبيد,اما تيار التسرب فقد ازداد مقداره بازدياد درجة حرارة التلبيد, وكذلك بالنسبة لجهد الحدود الحبيبية فقد ازدادت قيمها بازدياد درجة حرارة التلبيد. | ZnO is a ceramic material which tends to intrinsically form as an n - type semiconductor material, which plays an important role in a wide range of industrial processes and commercial products.One of most important usages is a Surge protection device which used to protect power and electronic equipment from the destructive transient overvoltage which arises from lightning or other large - magnitude surge, this device is called metal oxide varistor (MOV).Varistors are voltage dependent, non - ohmic devices whose electrical characteristics are almost similar to back - to - back Zener diodes.Improvement ZnO varistor performance accomplished by doping it by some metal oxides, Bi2O3, Sb2O3, Co3O4, Cr2O3, and MnO2, where they were testing their effect alone first, and second was added rare earth oxides (M2O3) with oxides mentioned above and test their effect on varistor, where (M = Dy, La, Y) and molar concentrations (10 - 3, 5*10 - 3, 10*10 - 3)The preparation process starts from mixing ZnO with additives, calcination at 600℃ in a furnace to remove the gases and the humidity from the powders. Then the calcined powders uniaxially pressed into discs (pellets) of 15 mm in diameter and 2 mm in thickness under a pressure equals to 25MP. After pressing the green pellets sintered under different temperatures (1050, 1100, 1150℃) and a fixed time to accomplish the final shapes and reach the desired properties of the samples.Then the densities of the samples were measured by using Archimedes Principle with mercury liquid to calculate the relative density and the porosity of each sample, and to study the effect of the sintering temperature and REO concentration, which already be obvious the effect of them. The microstructure test of the material prepared gave a clear vision for the diffusion and grain growth, although the results of XRD test showed that the crystal structure is an orthorhombic, and the values of (a, b, c) and the size of a the unit cell has been increased with increase the sintering temperature and ratios of the concentration of oxides added and kind.Micro and nano grains within the present research showed a significant effect on the studied electrical characteristics, which designed a tool in the laboratory for it and to measure the nonlinear coefficient, the amount breakdown voltage, leakage current, the potential gradient, the energy absorption capability, and the voltage per grain boundary. It was found that the nonlinear coefficient increases with the increasing of REO concentration added and increasing sintering temperature and then starts decreased after degree (1100℃ ) due to volatilization and evaporation of bismuth oxide and spinel phase (Zn7Sb2O12).The amount of breakdown voltage, potential gradient, energy absorption capability decreased with rising the sintering temperature, while the leakage current has been increased with increasing the sintering temperature, as well as the voltage per grain boundary has been increased with increasing of the sintering temperature.

دراسة الصفات الحرارية والميكانيكية وعمر الاداء PVC لبوليمر Study of the Thermal, Mechanical Properties and Lifetime of PVC Polymer

اسم المؤلف: صهيب صباح احمد
اسم المشرف: وداد حمدي جاسم محمد عبد النبي ثجيل
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: In this work, mechanical behavior of PVC product like pipes with different origins (K.S.A and Egypt) and Turkey doors with different manufacturing (Nova and Firat) which are used in Iraqi markets were studied.The objective of this work was to study the mechanical properties like ultimate tensile strength, Young's modulus, elongation at Max., elongation at break, impact strength, flexural strength and hardness of the pipes and doors.The experimental results show that K.S.A pipes exhibited maximum ultimate tensile strength and Young's modulus than that the Egypt pipes.However, the Egypt pipes exhibited maximum elongation at Max. and elongation at break when compared with K.S.A pipes.All the tensile properties of Firat doors are greater than that of Nova doors.Comparison of the flexural strength of pipes and doors. The pipes have the same flexural strength but the Firat doors have maximum value than Nova doors.Egypt pipes have a higher impact strength than K.S.A pipes. While the Firat doors have a higher impact strength than Nova doors. The experimental results of hardness Shore D indicated that K.S.A pipes exhibited maximum hardness number (83.7) than Egypt one, while the Firat and Nova doors have the same values.In this study, thermal properties of Firat and Nova have been evaluated, firstly by thermal conductivity and second by thermal stability and degradation. The Firat doors have better thermal conductivity than that of Nova doors. From the thermogravimetric analysis at different heating rates (2, 5, 10, 20 and 40 °C/min). The Firat doors have a higher thermal stability than Nova one.The Egypt pipes exhibited more thermal stability than the K.S.A pipes.From the TGA curves the activation energy of pipes and doors are determined at different conversion levels. At 30% conversion level when the mechanism of degradation would be stable and the value of activation energy of Egypt pipes and Firat doors is (108.35 KJ/mole) when it is (101.39 KJ/mole) for K.S.A pipes and (98.35 KJ/mole) for Nova doors. Thermogravimetric analysis (TGA) provides a method for accelerating the lifetime testing of polymers so that short - term experiments can be used to predict in use lifetime.The lifetime is decreased with increase of the temperature, at fixed temperature like 70 °C the lifetime of Egypt pipes is (≈100 years) while lifetime of K.S.A pipes is (≈21 years). At the same temperature (70 °C) the lifetime of Firat doors is (≈72 years) while the lifetime of Nova doors is (≈21 years).Thermomechanical analysis (TMA) test showed the glass transition temperature (Tg) and softening point (Ts) for pipes and doors. The K.S.A pipes have value for Tg and Ts higher than that of Egypt pipes, while the Firat and Nova doors have the same values.

دراسة بعض الخواص الفيزيائية للايبوكسي المدعم بدقائق نانوية STUDY OF SOME PHYSICAL PROPERTIES OF EPOXY REINFORCE WITH NANO PARTICLES

اسم المؤلف: صفاء عبد صالح
اسم المشرف: وداد حمدي جاسم
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم استخدام مادة الايبوكسي (EP) مع نسب خلط حجمية مختلفة (1, 2, 3, 4, 5, 7, 10, 15 و20%) من الجسيمات الزركونيا ( 2(ZrO والمغنيسا ( MgO) النانوية ومن الجسيمات 2 ZrO وMgO المايكروية لتحضير متراكبات الايبوكسي النانوية ومتراكبات الايبوكسي المايكروية لفحص ودراسة بعض من خصائصها الميكانيكية (متانة الانحناءومعامل الانحناء ومتانة الكسر وقوة الصدمة والصلادة ) والخواص الكهربائية العزلية ( ثابت العزل الكهربائي وزاوية ظل الفقد والتوصيلية الكهربائية) والخواص الحرارية (التوصلية الحرارية ودرجة الانتقال الزجاجي)طريقة تحضير عينات الايبوكسي وعينات متراكبات الايبوكسي النانوية وعينات متراكبات الايبوكسي المايكروية تضمنت مراحل الخلط الميكانيكي ومجانس خلط الامواج فوق الصوتية واستخدام منظومة التفريغ. تم استخدام فحص الانحناء ذي النقاط الثلاث وفحص وقوة الصدمة وفحص الصلادة وفحص السعة الكهربائية العزلية وفحص الماسح التفاضلي السعوي الحراري وفحص مجهر المسح الالكتروني وفحص التوصيل الحراري لفحص عينات الايبوكسي ومتراكباتة النانوية والمايكروية وقد اظهرت النتائج التي تم الحصول عليها من فحص متانة الانحناء ذي النقاط الثلاث زيادة تدعيم الخصائص الميكانيكية لمتراكبات الايبوكسي الزركونيا النانوية ,ان نسبة 2% من الخلط تؤدي الى اعلى نسبة تدعيم لا متانة الانحناء بلغت 52% اما معامل الانحناء فتضاعف مرتين عند هذه النسبة وايضزاادة متانة الكسر لتصل الى 86% مقارنة مع نتائج عينة الايبوكسي واما قوة الصدمة فقد بلغت 51% وارتفعت صلادة المادة 5% نسبة التدعيم 2% . وقد ظهر الكسر اللدن بشكل واضح في بعض منحنيات الاجهاد - الانفعال في متراكبات الايبوكسي زركونيا.كما اظهرت الخصائص الميكانيكية لمتراكبات الايبوكسي مغنيسيا النانوية زيادة تدعيمها بزيادة نسب الخلط الحجمية لجسيمات المغنيسيا النانوي في التراكيز القليلة (< 5%) حيث اظهرت النسبة 4% من MgO اانانوية اعلى قيمة لقوة الانحناء حيث ازدادة بنسبة 47% مقارنة EP) ) في حين معامل الانحناء ارتفع بنسبة 74% مقارنة EP) ) في حين متانة الكسر لمتراكبات الايبوكسي مغنيسيا النانوية فتضاعفت بحدود اربع مرات عن الايبوكسي وقد بلغت قوة الصدمة 65% عند نسبة التدعيم وارتفعت صلادة المادة 3% مقارنة EP) ) لوحده. وقد ظهر الكسر اللدن بشكل واضح في منحنيات الاجهاد - الانفعال في متراكبات الايبوكسي مغنيسيا..الخصائص الميكانيكية لمتراكبات الايبوكسي زركونيا المايكروية ومتراكبات الايبوكسي مغنيسيا المايكروية اظهر انخفاض في خصائصها الميكانيكية بارتفاع نسب الخلط الحجمي للجسيمات المايكروية للزركونيا وللمغنيسيا ما عدا معامل الثني فقد زاد بارتفاع نسب الخلط الحجمي لجسيمات الزركونيا والمغنيسيا المايكروي.وهذا يظهر تفوق الجسيمات النانوية عن الاخرى المايكروية حيث اضافتها بنسب ضئيلة تؤدي الى تحسين ملحوظ في الصفات الميكانكية والتي يتم تفسيرها عن طريق الصور الماخوذة عن مجهر الماسح الالكتروني والتي اظهرت البنية التركيبة لسطح الكسر لمتراكبات الايبوكسي زركونيا النانوية ولمتراكبات الايبوكسي مغنيسيا النانوية بوجود شقوق نانوية عند نسب خلط حجمية معينة ,وقد بينت صور الكسر انتهاء اغلب الشقوق من التركيب بسب وجود الاضافات لجسيمات الزركونيا والمغنيسيا النانوية فكانت اقل ما يمكن في نسب2 % من نسب الخلط الحجمي لجسيمات الزركونيا النانوي وعند 4% من نسب خلط حجمي لجسيمات المغنيسيا النانوي. وهذا معزز من النتائج العملية التي حصلنا عليها عند هذه النسب الضئيلة الاضافة واثرها في تحسين الصفات الميكانيكية للايبوكسي.ان الخصائص الكهربائية العزلية لمتراكبات الايبوكسي زركونيا النانوية ولمتراكبات الايبوكسي مغنيسيا النانوية اظهرت زيادة تدعيم ثابت العزل الكهربائي عند نسب الخلط الحجمية الواطئة لجسيمات الزركونيا والمغنيسيا النانوية في حين في نسب الخلط العالية (> 10%) بداء ثابت العزل الكهربائي لمتراكب الايبوكسي مغنيسيا الناوني بالارتفاع عن اعلى نسبة تحسن في حين ثابت العزل الكهربائي لمتراكب الايبوكسي زركونيا بالانخفاض. في حين ان زاوية ظل الفقد لمتراكب الايبوكسي زركونيا النانوي تزداد زيادة طفيفة بزيادة نسب الخلط الحجمي لجسيمات الزركونيا النانوي في حين زاوية ظل الفقد لمتراكب الايبوكسي مغنيسيا النانوي تقل بنسب قليلة بزيادة نسب الخلط الحجمي لجسيمات المغنيسيا النانوي.التوصيل الحراري لمتراكبات الايبوكسي زركونيا النانوية ولمتراكبات الايبوكسي مغنيسيا النانوية لها نفس السلوك نسب خلط حجمية مختلفة (1, 2, 3, 4, 5, 7, 10, 15 و20%) ان التوصيل الحراري لكلا المتراكبتين (لمتراكب الايبوكسي زركونيا النانوي ولمتراكب الايبوكسي مغنيسيا النانوي) يزداد بزيادة نسب الخلط الحجمية لجسيمات زركونيا ومغنيسيا النانوية. تمتلك المتراكبات النانوية توصيل حراري اقل من المتراكبات المايكروية. اما المتراكبات النانوية فقد امتلك متركبت الزركونيا قيما اعلى للتوصيل الحراري مقارنة بمتراكبة المغنيسيا. | Epoxy with various mix ratio of concentration 1, 2, 3, 4, 5, 7, 10, 15 and 20% of ZrO2, MgO nanoparticles and ZrO2, MgO microparticles were used to prepare epoxy microcomposites and epoxy nanocomposites in order to study the several mechanical properties (flexural strength, flexural modulus , fracture toughness, impact strength and hardness) and electrical properties (dielectrical constant , dissipation factor and thermal conductivity) and thermal properties (thermal conductivity and Tg).The molding process was used to prepare epoxy and their nanocomposite and microcomposite samples using, ultrasonic homogenizer and shearing mixer. Three point bending examine, impact strength examine, hardness shore D examine, The LCR meter examine, Scanning Electron Microscope (SEM) examine and Differential Scanning Calorimeter (DSC) were used also.The results where obtained to form 3 - point bending examine illustrated that the mechanical properties of EP/ ZrO2 nanocomposites were increased with increasing concentration of ZrO2 nanoparticles. The ratio of about 2% vol. fraction lead to Maximum improvement in flexural strength was 52%. flexural modulus improvement was doubled at this ratio of vol. fraction, fracture toughness is improved about 86% at 2% vol. fraction, impact strength is improved about 51% at 2% vol. fraction , while hardness is improved about 5% at 2% vol. fraction comparing with results of epoxy sample. Ductile behavior appears in some stress - strain curves of obtained for EP/ ZrO2 nanocomposites. The mechanical properties of EP/ MgO nanocomposites were increased with increasing concentration of MgO nanoparticles at low volume fractions (˂ 5%) of MgO nanoparticles. Flexural strength improved 47% at 4% vol. fraction. Flexural modulus is improvement about 74% at 4% vol. fraction, fracture toughness is rise about four times at 4% vol. fraction. impact strength is improved about 65% at 4% vol. fraction, while hardness is improved about 3% at 4% vol. fraction . Ductile behavior almost appears in stress - strain curves of EP/ MgO nanocomposites. The mechanical properties for epoxy ZrO2/ MgO microcomposites reduce with increasing concentration of ZrO2/ MgO microparticles. this show nanoparticles overcome for others microparticles; thus addition quit small amounts .lead to particularly improvement in mechanical properties ,which can be explain through the pictures . Scanning Electron Microscope (SEM) pictures show the topography of fractured structure of EP/ ZrO2 nanocomposites and EP/ MgO nanocomposites with nanocracks of the epoxy structure at some of volume fractions of ZrO2/ MgO nanoparticles, while the topography of fractured structure show the nanocracks almost vanish from the structure because of adding ZrO2/ MgO nanoparticles was at minimum value at 2% vol. fraction of ZrO2 nanoparticles and 4% vol. fraction of MgO nanoparticles . this enhance by experimental results which we got it in the small raito addition .their influence to improve mechanical properties of epoxy. Dielectrical properties of EP/ ZrO2 nanocomposites and EP/ MgO nanocomposites show; Dielectric constant improved at low volume fraction of ZrO2/ MgO nanoparticles, while at higher concentration (> 10%) Dielectric constant of EP/ MgO nanocomposites stile increased and Dielectric constant begin to reduce in EP/ ZrO2 nanocomposites. Tan delta of EP/ ZrO2 nanocomposites little increase with increasing volume fraction ZrO2 nanoparticles, while Tan delta of EP/ MgO nanocomposites begin to reduce with increasing volume fraction of MgO nanoparticles.Thermal conductivity for EP/ ZrO2 nanocomposites and EP/ MgO nanocomposites have the same behavior with 1, 2, 3, 4, 5, 7, 10, and 15% vol. fraction. thermal conductivity of both EP/ ZrO2 nanocomposites and EP/ MgO nanocomposites increase with increasing the volume fraction. EP/ MgO nanocomposites and EP/ MgO nanocomposites have thermal conductivity lower than from EP/ MgO microcomposites and EP/ MgO microcomposites

تحضير ودراسة مفرق هجين من مادة (CuInTe2) Preparation and Study Heterojunction From CuInTe2 Material

اسم المؤلف: شيماء قاسم عبد الحسن
اسم المشرف: بشرى كاظم حسون الميالي فلاح ابراهيم مصطفى العطار
الموضوع العام: علوم الفيزياء
السنة: 2017
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: حضرت سبيكة CuInTe2(CIT) بطريقة التبخير الحراري في الفراغ بعد ها تم تحضير اغشية هذه المادة على قواعد من الزجاج بدرجات حرارة تلدين K((673,473 وسمك nm(900,600,300).تم فحص تركيب كل من سبيكة واغشية CIT المحضرة بظروف مختلفة بواسطة تقانة حيود الاشعة السينية .XRD وقد اظهرت نتائج حيود الاشعة السينية ان السبيكة وجميع الاغشية الملدنة عند درجة حرارة تلدين K(673 and 473) كانت تمتلك تركيبا متعدد التبلور من النظام الرباعي (Tetragonal) بالاتجاه البلوري السائد (112)، في حين كانت الاغشية المحضرة في درجة حرارة الغرفة (300)K ذات تركيب عشوائي. اما دراسة خصائص سطح اغشية CIT بواسطة مجهر القوة الذرية AFM فقد بينت زيادة الحجم الحبيبي مع زيادة كل من درجة حرارة التلدين والسمك.واظهرت القياسات البصرية لاغشية CIT انها تمتلك فجوة طاقة مباشرة، اذ تزداد فجوة الطاقة بزيادة درجة حرارة التلدين لجميع الاغشية المحضرة، وكذلك تم حساب النفاذية والثوابت البصرية مثل معامل الانكسار ومعامل الخمود وثابت العزل بجزئيه حقيقي والخيالي ضمن مدى الاطوال الموجيةnm (600 - 2700) .واظهرت نتائج الخصائص الكهربائية للاغشية المحضرة على قواعد الزجاج ان التوصيلية الكهربائية المستمرة D.C كانت تمتلك حاملات شحنة من النوع الموجب، وانها تزداد مع زيادة درجة حرارة التلدين لجميع الاغشية المحضرة في حين كانت تقل مع زيادة السمك .وان لهذه الاغشية طاقتي تنشيط، اي انها تملك اليتين للانتقال الالكتروني.كما بينت ايضا نتائج تاثير هول ان الاغشية كانت تمتلك حاملات شحنة من النوع (p - type).في هذا البحث ايضا تم تصنيع خلايا شمسية من ترسيب اغشية CITعلى قواعد سليكونية مكونة من المفارق الهجينةSi/CIT) ) الملدنة بدرجات حرارة وسمـــك مختلفة، واخرى على قواعد مكونة من زجاجFTO , ITO للمفارق الهجينة ITO/ CdS/ CIT)) و(FTO/CdS/CIT)، وكذلك ITO/ZnO/CdS/CIT)) و(FTO/ ZnO/CdS/CIT) المرسبة بطريقة التبخير الحراري . تم قياس سعة الانحياز العكسي كدالة لفولتية الانحياز عند التردد الافضل 10)KHz) وبينت هذه النتائج ان المفارق من النوع الحاد، كما قلت السعة بزيادة جهد الانحياز العكسي وهبوط جهد البناء الداخلي بزيادة درجة حرارة التلدين .واظهرت دراسة خواص (تيار - جهد) في حالة الاضاءة للمفارق الهجينة المحضرة بان افضل مفرق لتصنيع خلية شمسية على القواعد السليكونية كان للمفرق المحضر بسمك 600)nm (بدرجة حرارة تلدين (673)K. اذ بلغت الكفاءة التحويلية (%1.8) وعند طلاء هذه الخلية بطبقة مضادة للانعكاس من مادة TiO2 بسمك 600)nm) ازدادت الكفاءة لتصل الى (2.4%). | CuInTe2 (CIT) alloy prepared by thermal evaporation technique then prepared thin film from this alloy on glass substrate of different thickness (300,600 and 900 ±20)nm and at different annealing temperature (473 and 673)K.The structure of the alloy and CIT films which prepared at different deposition condition are examined using x - ray diffraction (XRD) technique.XRD analysis show that the alloy and the films prepared at (473 and 673)K have polycrystalline structure of tetragonal type with preferred orientation[112],while films prepared at R.T(300)K show amorphous structure. CIT films morphology were studied using AFM techniques, the results show that increase in grain size with increase thickness and annealing temperature .The optical measurement show that CIT films have a direct energy gap and it increase the increasing annealing temperature ,the transmittance and optical constant such as refractive index ,extinction coefficient and the dielectric constant with both part real and imaginary within the wavelengths in the range (600 - 2700)nm were calculated too.Electrical properties results for films prepared on glass substrate as a function of thickness and annealing temperature show that the electrical conductivity D.C were p - type and it with increasing annealing temperature while it decrease with increasing thickness, all films have two activation energies with two mechanisms of transport of free carriers .Hall effect results show that all films were p - type.In this research, fabrication solar cells from deposition CIT films with different thickness and different annealing temperature on silicon substrate (Si/CIT) heterojunction and another deposition on FTO,ITO substrate to fabricated solar cell from (ITO/CdS/CIT) ,) FTO/CdS/CIT) heterojunction and (ITO/ZnO/CdS/CIT) , (FTO/ZnO/CdS/CIT) heterojunction by using thermal evaporation technique.The C - V measurements as a function of reverse bias voltage at frequency (10KHz) show that the heterojunctions are abrupt type, the capacitance decrease as reverse bias voltage increase and the value of built - in potential decrease with increasing annealing temperature. The current - voltage characterization study for heterojunction prepared under illumination shows that the solar cell which have optimum condition deposition on silicon substrate with the thickness 600nm at annealing temperature 673K, have best efficiency (1.8%) among other cells, and after coating this cell by antireflection coating (TiO2) with thickness (600)nm, the value of efficiency increase to(2.4%)

التركيب المورفولوجي والخواص البصرية لاغشية In2O3 الرقيقة Morphology Structural and Optical Properties of In2O3 Thin Films

اسم المؤلف: شيماء احمد كاظم
اسم المشرف: علية عبد المحسن شهاب
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يتناول هذا البحث دراسة تاثير تغير زمن الاكسدة ودرجة حرارة التلدين على الخصائص التركيبية والبصرية لاغشية اوكسيد الانديوم الثلاثي (In2O3) الرقيقة التي تم تحضيرها بتقنية التبخير الحراري في الفراغ ، حيث تم ترسيب معدن الانديوم (In) على قواعد من الزجاج واخرى من السليكون بدرجة حرارة الغرفة (300 K) وبسمك (400 ± 10 nm) وبمعدل ترسيب 5.47 ± 0.5 nm/sec)) ، ومن ثم اكسدة اغشية (In) المحضرة حراريا بدرجة حرارة (673 K) وبوجود الهواء وبزمن مختلف (ساعة ، ساعة ونصف ، ساعتان) ، بعد ذلك تم اجراء التلدين بدرجات حرارة مختلفة K (323 , 373 , 423) على اغشية (In2O3) المؤكسدة بزمن ساعة واحدة باعتبار ان هذا الزمن هو افضل زمن اكسدة من ناحية قيم فجوة الطاقة البصرية والحجم الحبيبي والخشونة ومعدل الخشونة . درست الخصائص التركيبية للاغشية المحضرة (قبل التلدين وبعده) عن طريق تقنية حيود الاشعة السينية (XRD) التي اظهرت ان هذه الاغشية ذات تركيب بلوري متعدد ومن نوع مكعب ، وكذلك تم استخدام مجهر القوة الذرية (AFM) والمجهر الالكتروني الماسح (SEM) لدراسة طوبوغرافية السطح من ناحية التجانس والخشونة ومعدل الخشونة . درست الخصائص البصرية للاغشية المحضرة (قبل التلدين وبعده) باستخدام المطياف البصري (Optical Spectrometer) ، حيث تم حساب فجوة الطاقة البصرية والتي كانت ذات قيمة اقل عند زمن اكسدة ساعة وعند درجة تلدين (323 K) ، بالاضافة الى دراسة طيف كل من الامتصاصية والنفاذية والانعكاسية ، وايضا تم حساب الثوابت البصرية وهي : معامل الامتصاص ، معامل الانكسار ، معامل الخمود ، ثابت العزل بجزئيه الحقيقي والخيالي كدالة لطاقة الفوتون ، وقد بينت النتائج ان زيادة قيم هذه الثوابت متعلقة بزيادة زمن الاكسدة ودرجة حرارة التلدين. | This research examines the effect of changing time of oxidation and the degree of annealing temperature on the structural and optical properties of membranes dioxide triple indium (In2O3 thin) that was prepared technology thermal evaporation in a vacuum, where the deposition of metal indium (In) on the glass and silicon substrate at room temperature (300 K) and thickness (400 ± 10 nm) and the rate of deposition of (5.47 ± 0.5 nm / sec) , and then oxidation films (In) prepared thermally and the presence of air at a different (hour, hour and a half, two hours) , then annealing was performed at different temperatures (323, 373, 423) K films (In2O3) oxidizing a time of one hour, considering that this time is the best time of antioxidants in terms of optical energy gap and grain size and roughness values and the rate of roughness . Structural properties of prepared films have been studied (before and after annealing) by X - ray diffraction technique (XRD) which showed that these films with the structure of crystalline multi it cubic type, as well as the use of an atomic force microscope (AFM) and electron microscopy scanner (SEM) to study the topography of the surface in terms of homogeneity and roughness and the rate of roughness . Optical properties of prepared films have been studied (before and after annealing) using the optical spectrometer, where the optical energy gap , and which were less valuable when oxidation hour time account and at a temperature annealing (323 K) , in addition to the study of spectrum both absorbance and transmittance and reflectivity , and was also the optical constants account : the absorption coefficient, refractive index, extinction coefficient, dielectric constant real and imaginary as a function of photon energy, the results have been shown to increase the values of these constants related to increased oxidation time and the annealing temperature.

تصميم وتقييم طلاء المضاد للانعكاس غـير المسـتقطـب Design and Evaluation of Non - Polarizing Antireflection Coating

اسم المؤلف: سارة عامـر ســــلمان
اسم المشرف: الاء نزار عبد الغفار
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: لقد تم اجراء دراسة نظرية ووضع نموذج رياضي يعتمد في بناءه على المصفوفة المميزة المعدلة لتصميم طلاء مضاد للانعكاس لايتاثر بالاستقطاب ودراسة تاثير زوايا السقوط المائل . حيث توصلنا الى بنى تصاميم مثلى لطلاءات مضادة للانعكاس غير مستقطبة ولزوايا سقوط مختلفة للطيف الكهرومغناطيسي باستخدام مواد متجانسة موحدة الخواص مهملة الامتصاص ضمن منطقتي الضوء المرئي (300 - 800)nm وتحت الحمراء المتوسطة (3000 - 5000)nm وباستخدام الزجاج والسليكون كمواد اساس على التوالي.وفقا لاجراءات تحقق الامثلية فان النتائج اشارت الى امكانية التغلب على الصعوبات التي تظهر نتيجة السقوط المائل للطيف والتي من ابرزها ظاهرة الفصل (Splitting) لموجة الضوء المنعكسة الى مستويين P, S (نتيجة لظاهرة الاستقطاب) وايضا الازاحة الجانبية لمنحنيي الانعكاسية RS,RP باتجاه الاطوال الموجية القصيرة واللاتناظر بين المنحـنيين .وقد اظهرت التصاميم مقدرة عالية في تقليل انعكاسية الزجاج (ضمن منطقة الطيف المرئي) والسليكون (ضمن منطقة تحت الحمراء المتوسطة ) وتحقيق ادنى انعكاسية عند طول موجة التصميم المقترحة ولمدى واسع من زوايا السقوط. كما اوضحت النتائج امكانية التوصل الى تصميم طلاء مضاد للانعكاس غير مستقطب واسع الحزمة عند زوايا سقوط عالية تصل الى 60o وبعدد طبقات قليلة في المنطقة المرئية, فضلا عن التوصل الى تصميم طلاء مضاد للانعكاسية غير مستقطب عند اطوال موجية مختلفة عند 80o في المنطقة الحمراء | In this current study a mathematical model was put on to design anti - reflection coatings at oblique incidence of light for visible region (300 - 800 )nm and mid infrared region (MWIR) (3000 - 5000)nm .successfully we achieved designs with optimal performance at high angles of incidence where the results refer to overcome significant problems of design at oblique incidence .the main problem that we were able to overcome, is the splitting of the incident light into two modes of wave S and P - polarization where the separation of reflection performance for both S - and P - polarized wave expands when incidence angle increases. We managed to obtain designs of non - polarized antireflection coatings those that have the same reflection for both S - and P - polarizations at specified angles. results refer to designs of non - polarized antireflection coatings without splitting at high incidence angles. We accomplished designs of non - polarized antireflection coatings that provide low reflection within the Intended range of wavelengths where we could to limit the effect of the high incidence angles that increase the reflectance of the chosen substrates.Also the problem of shifting of reflection performance toward shorter wavelengths due to the oblique incidence of light was resolved and designs of optimal performance of non - polarized antireflection coatings with low reflection at high incidence angles was achieved.It has been provided a promising coating materials system for use in design of non - polarizing antireflection coatings at different incidence angles for the concerned wavelengths regions

دراسة تاثير خطوط الضغط العالي على تراكيز غاز الرادون في الهواء باستعمال كاشف الاثر النووي CR - 39 Study of The Effect of High Voltage Power Lines on Radon Concentrations in Air Using Solid State Nuclear Track Detector CR - 39

اسم المؤلف: زينة جميل رحيم عبد علي
اسم المشرف: خالد هادي مهدي العبيدي ندى فاضل توفيق
الموضوع العام: علوم الفيزياء
السنة: 2009
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يتضمن الهدف من البحث دراسة تاثير خطوط الضغط العالي 132kV)و400kV ) في مناطق منتخبة من مدينة بغداد على تراكيز الرادون ونواتج انحلاله باستعمال كاشف الاثر النووي CR - 39. تم توزيع عدد من الكواشف بابعاد (2x1cm²) ولمدة شهر كامل داخل وخارج محطتي بوب الشام 400kV والوزيرية 132kV , كذلك في عدد من الدور السكنية القريبة من خطوط الضغط العالي 132kV ومحطة المعري 132kV القريبة من منطقة العدل ببغداد خلال فصل الخريف. تم تحديد تراكيز الرادون خلال المقارنة مع العينات القياسية، ومن خلال النتائج المستحصلة كانت قيمة المعدل الموزون لتراكيز الرادون داخل الابنية تحت تاثير خطوط الضغط العالي 400kVهي 91.77±0.1122Bq/m³)) وفي الخارج كانت مساوية الى (125.73± o.117 Bq/m³) وتحت تاثير خطوط الضغط العالي 132kV في الداخل كانت مساوية الى 60.03± 0.266 Bq/m³)) اما في الابنية البعيدة عن خطوط الضغط العالي فقد كانت مساوية الى Bq/m³) 23.265± 0.77) وفي خارج الابنية 13.63± 0.99 Bq/m³)) يتضح خلال نتائج الدراسة ارتفاع تراكيز غاز الرادون في المناطق القريبة من خطوط الضغط العالي وبشكل ملحوظ مقارنة مع المناطق البعيدة عن الخطوط مما يدل على ان هناك تاثيرا واضحا لخطوط الضغط العالي على تراكيز غاز الرادون ويزداد هذا التاثير بزيادة شدة المجال الكهرومغناطيسي والقرب من هذه الخطوط, كما كان لخطوط 400kV تاثير اقوى من خطوط 132kV على تراكيز الرادون في الهواء, اما تراكيز غاز الرادون داخل الابنية فكانت اعلى من تراكيزه خارج الابنية , وهذه الزيادة في التركيز تعود الى ان جدران الابنية تعد المصدر الرئيس لتوليد الرادون داخل الابنية , حيث تبين ان مواد البناء قد ادت دورا مهما في زيادة تراكيز غاز الرادون داخل الابنية بالاضافة الى عمر الابنية والارتفاع عن مستوى سطح الارض . | The aim of this research the study of the effect of high Voltage power lines (400kVand132kV) upon radon concentration and its decay results by using nuclear track detectors CR - 39 inside Baghdad city. A number of detectors with the dimensions (2x1cm2) was scattered for a whole month indoor and outdoor Bob Al - sham station 400kV and Al - waziriya station 132kV as well as in number of the houses which are very close from the high voltage power lines 132kV and Al - maary 132kV during autumn. The concentrations of radon were determined through the comparison with the standard samples , The results shows that the value of Weighted Average of radon concentration indoor the buildings which are under the effect of high voltage 400kV is (91.77 ± 0.117Bq/m3) and under the effect of high voltage lines 132kV indoor is equal to (60.03±0.266Bq/m3) ,As for the buildings which are far away from the high voltage lines , it was equal to (23.2651± 0.773Bq/m3) and outdoor the buildings (13.63±0.99 Bq/m3) . The results showed that increase of radon concentration in the areas which are close to high voltage power lines compared with areas which are far away from the lines which show that there is a clear effect of high voltage power lines upon the concentration of radon . And this influence increases with increase of the intensity of electromagnetic field as well as the near distance with these lines .For there was a stronger effect of 400kV lines than 132kV lines upon radon concentration in air, Also the concentration of radon gas indoor the building were higher from its concentration outdoor the building . And this increase in concentration is due to the fact that the walls of the buildings are considered to be the main source for generating radon indoor the building as well

تصميم وتصنيع الطلاء المضاد للانعكاس معتمدين طريقة الليزر النبضي في الترسيب DESIGN AND FABRICATION OF ANTI REFLECTION COATING BY PULSED LASER DEPOSITION

اسم المؤلف: زينب حازم عبد الرحيم
اسم المشرف: الاء نزار عبد الغفار كاظم عبد الواحد عادم
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا العمل تم تصميم طلاء المضاد للانعكاس بسمك ربع ولاربع طول موجي ودراسة خصائص بصرية للاغشية الرقيقة والاستفادة منهما في تصنيع طلاء مضاد للانعكاس ضمن المنطقة المرئية والحمراء القريبة . اعتمد تصميم الطلاء على مفهومين اساسيين هما نظرية المصفوفة المميزة وتصميم طلاء بسمك ليس ربع طول موجي ولحالة السقوط العمودي للضوء.اخذين بنظر الاعتبار ظاهرة التشتت. تم دراسة نفاذية وانعكاسية الطلاء كدالة للتغير في الطول الموجي للضوء الساقط باستخدام الرزمة البرمجية MATLAB. اوضحت نتائج التصميم امكانية الحصول على انعكاسية واطئة لمدى واسع من الطيف الكهرومغناطسي يشمل المنطقة المرئية ومنطقة الحمراء القريبة عندما يكون السمك البصري ضمن المدى اقل 0.7L لمادة MgF2 المرسبة على الزجاج ويكافي الاسماك الهندسية للغشاء (34.5,36.91,78.3) نانومتر, وامكانية الحصول على انعكاسية واطئة لمدى واسع في درجة حرارة التلدين عند سمك البصري 1.2L ويكافى السمك الهندسي ((141.6 نانومتر. تكتسب هذه النتيجة اهميتها في امكانية تخمين السمك الامثل قبل البدء بمرحلة التحضير حيث اشارت النتائج الى معادلة تجريبية تربط بين عدد النبضات وسمك الغشاء. لغرض تصنيع الطلاءالبصري, تم استخدام طريقة الترسيب بالليزر النبضي لليزر النيديميوم - ياك1064 نانومتر الذي يعامل بتقنية التولد المتوافق الثاني بطول موجي 532 نانومتر والذي يعمل بتقنية عامل النوعية بمعدل تكرارية (1 - 6) هرتز وامد نبضة 10 نانوثانية. لتحضير اغشية فلوريد المغنيسيوم المرسبة على الزجاج, قمنا بدراسة ظروف التحضير التي تتضمن التغير بعدد النبضات (150و250 و350و 450 نبضة) لترسيب اغشية فلوريد المغنيسيوم ومدى تاثيرهم على سمك الاغشية المحضرة وتركيبها وحجم الحبيبات وبالتالي على نفاذيته ومدى امكانية استخدامه كطلاء مضاد للانعكاس. لقياس سمك الاغشية المحضرة, تم استخدام جهاز مقياس اللبسومتر وتم استخدام جهاز المطياف لايجاد النفاذية والانعكاسية والثوابت البصرية ومعاملي الانكسار والتوهين (n, k) وعلى التوالي. اوضحت النتائج بان الطلاء المضاد للانعكاس المحضر من طبقة واحدة يمتلك نفاذية عالية وانعكاسية واطئة تشمل منطقتين من الطيف المرئية والحمراء القريبة وان معامل الانكسار يتراوح بين (1.05 - 1.25( في حين كانت اسماك الاغشية المحضره تتراوح بين )34.5 - 141.6 ) نانومتر, كذلك اوضحت صور (AFM) بان الحجم الحبيبي يتراوح ضمن المدى (86.55 - 94.81) نانومتر. | In this work design and fabricated antireflection coating (AR’C) with single layer. Design of the AR’C was based on the characteristic matrix method with quarter and non - quarter optical thickness. The effect of deposited material at normal incident of light was taken into account and the reflection performance was computed with the aid of MATLAB over the visible and near infrared region. Results show that wideband AR’C was achieved when deposited thin film of MgF2 on glass with non - quarter optical thickness less 0.7L related to geometrical thickness (34.5,36.9,78.3 nm) at room temperature. Also wideband AR’C achieved with non quarter 1.2L optical thickness deposited related to geometrical thickness (141.6nm) at annealing temperature. However results accept significant importance to estimate the optimum thickness before preparation stage. In this study antireflection coating fabricated by using pulsed laser deposition technique (PLD) which deposit MgF2film on glass substrate. Q - switching Nd : YAG laser beam with second harmonic generation (SHG) technique of wavelength 1064 nm and 532 nm, repetition rate 1 - 6 Hz and the pulse duration 10 ns was used. The film thickness, structural behavior and grain size dependent on that prepared conditions which include variation number of shot (150,250,350,450 pulses) have been studied.The thicknesses of MgF2 nanostructure films were measured using Lipsometre. Further, the experimental results shows high transmittance, wideband low reflection and the refractive index within the range (1.05 - 1.25), while the thicknesses are (34.5 - 141.6 nm). Atomic force microscope (AFM) image illustrate that the grain size of the film within the range (86.55 - 94.81) nm

الخواص التركيبية والبصرية والكهربائية لاغشية اوكسيد النيكل المحضرة بطريقة الترذيذ كمتحسس غازي The structural, optical and electrical properties of NiO films prepared by RF - Sputtering as gas sensor

اسم المؤلف: زينب طارق عبد الحميد
اسم المشرف: قاسم عزيز محمد محمد عبد النبي
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The structural, optical, electrical, and gas sensing properties of nickel oxide have been studied. The structural properties of the deposited films were made using XRD, SEM and AFM. The NiO films have been prepared with different thicknesses (100, 150 and 200) nm on glass, Si and Al2O3 substrates, using RF - sputtering at 100°C substrate temperature. The electrical and optical parameters of the NiO films were characterized using Hall Effect and transmittance measurements.The X - ray diffraction result indicates that the films are of polycrystalline in nature with cubic structure. The grain size of the nanoparticales observed at the surface depended of films thicknesses, where 200 nm has smallest average grain size 85.5 nm and RMS increased with increasing of thicknesses.The optical characterization shows that the film has band gap that ranged in between 3.6 eV to 3.9 eV, the average transmittance of films was found to be ranged of 60% to 85% in the VIS - IR regions. The dark conductivity of NiO films has been studied as a function of film thickness, crystal structure transformation and temperature with particular regard to gas sensitivity in CO2, NO2, CO, NO and the ethanol vapor. The electrical properties were found to be dependent on the film thickness.I - V characteristics for NiO films at (air, vacuum, N2, O2andCO2) gases before and after annealing were investigation. It would appear from our result that the diminution of the dark conductivity after annealing may be due to the surface contaminations adsorbed on the surface of the NiO film during film preparation or from ordinary atmospheric air.The resistivity of the NiO thin films decreased with increasing of thicknesses, from 1.5x105 to 5.4x104 (Ω.cm), which is related to the increase of carrier concentration with film thickness. The results of measurements of NiO thin films show that these films have good conductivities and results obtained from Hall Effect indicate that the NiO films were (p - type).It was found that the sensitivity to other gases differs for different film thicknesses and working temperature. Furthermore, NiO films exhibits high and fast response to NO2 gas at 200°C, which makes it a promising candidate for a poisonous gas sensing.

تراكيز النويدات الطبيعية والصناعية في نماذج بيئية مختلفة لمدينة العمارة - محافظة ميسان Natural and Artificial Radionuclide Concentrations for different Environmental Samples in AL - Amara city - Missan Governorate

اسم المؤلف: زهراء عبد الحسين اسماعيل السوداني
اسم المشرف: خالد هادي مهدي العبيدي
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: فيزياء التلوث البيئي
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: الهدف من هذه الدراسة يتضمن جزئين الجزء الاول يتمثل بتقييم مستوى النشاط الاشعاعي الطبيعي والصناعي للعينات البيئية (تربة سطحية ,ومياه نهر دجلة , ومياه محطات التصفية ,ورواسب نهر دجلة) التي جمعت من مواقع مختلفة في مدينة العمارة - محافظة ميسان باستعمال تقنية مطيافية اشعة كاما مع كاشف الجرمانيوم عالي النقاوة (HPGe) ذي الكفاءة 40% وقدرة تحليل 1.8keV للطاقة 1.33MeV العائدة لنويدة الكوبلت - 60 وذلك لقياس الفعالية النوعية لليورانيوم - 238والثوريوم - 232 والبوتاسيوم - 40 والسيزيوم - 137 للوقوف على المستويات الاشعاعية, فضلا عن حساب مؤثرات الخطورة الاشعاعية لاشعة كاما (فعالية الراديوم المكافئة (Raeq),ومعدل الجرعة الممتصة في الهواء(Dɣ),والجرعة الفعالة السنوية للتعرض الخارجي (〖AEDE 〗_out) والداخلي (〖AEDE 〗_in),ودليل الخطورة الخارجي(Hex) والداخلي (Hin),ودليل الخطورة لاشعة كاما I_γ))) في النماذج البيئية المذكورة انفا.وقد بينت نتائج الدراسة الحالية ان معدلات الفعالية النوعية لليورانيوم - 238 والثوريوم - 232 والبوتاسيوم - 40 والسيزيوم - 137 ومعدلات مؤثرات الخطورة الاشعاعية لاشعة كاما في العينات البيئية كانت جميعها اقل من الحد المقبول به عالميا.اما الجزء الثاني من هذه الدراسة هو قياس تراكيز غاز الرادون في العينات البيئية (تربة سطحية ,ومياه نهر دجلة ,ومياه محطات التصفية ,ورواسب نهر دجلة ,وهباء الهواء) التي جمعت من مواقع مختلفة في مدينة العمارة - محافظة ميسان ,وذلك باستعمال تقنية كواشف الاثر النووي للحالة الصلبة نوع (CR - 39),فضلا عن حساب مؤثرات الخطورة الاشعاعية لغاز الرادون (محتوى الراديوم الفعال (CRa) ,و معدل الانبعاث الكتلي للرادون (EX(M)) ,و معدل الانبعاث السطحي للرادون (EX(S)) ,و مؤشر الفا (Iα) ,والرادون المذاب Cd)) ,و الجرعة الفعالة السنوية للرادون AEDw))) في النماذج البيئية المذكورة انفا.و بينت نتائج الدراسة الحالية ان معدلات تركيز الرادون - 222 في العينات البيئية كانت جميعها اقل من الحد المقبول به عالميا.يستنتج من هذه الدراسة ان بيئة مدينة العمارة هي ضمن الخلفية الاشعاعية الطبيعية . | The aim of this study includes two parts, the first part is to assessment level of natural and artificial radioactivity of environmental samples (surface soil, water of the Tigris River ,water filtering stations and sediments of the Tigris River) collected from various locations in AL - Amara city - Missan government using gamma - ray spectroscopy technique with High purity Germanium detector (HPGe) which has a photo peak relative efficiency of( ≥40 % ) and an energy resolution of (≤1.8 keV) for the 133 MeV gamma transition of 60Co to measure Specific activity concentration of 238U, 232Th, 40K and 137Cs, Also Evaluation of radiological hazard effects for Gamma ray (Radium Equivalent Activity (Raeq), Absorbed Dose Rate in Air (Dɣ), Annual effective dose outdoor (〖AEDE 〗_out) and Annual effective dose indoor(〖AEDE 〗_in), Hazard index outdoor )Hex( and Hazard index indoor) Hin (and gamma Index (I_γ)) In environmental samples listed above.The results of the present study have shown that the rates of Specific activity of 238U, 232Th, 40K and 137Cs and radiological hazard effects Rate for Gamma ray in environmental samples were all lower than the value of the global limit.The second part of this study is to measure the concentrations of radon gas in environmental samples (surface soil , water of the Tigris River, filtering water stations , sediments of the Tigris River and dust air) which collected from various locations in AL - Amara city - Missan government using Solid State Nuclear Track Detectors type (CR - 39), In addition to Evaluation of radiological hazard effects for Radon gas (Effective radium content (CRa), Mass exhalation rate for Radon ????????(????), Surface exhalation rate for Radon ????x(????), Alpha index (Iα), Radon dissolved )Cd) and Annual effective dose )AEDw)) In environmental samples listed above.The results of the present study have shown that the rates of radon - 222 concentration in environmental samples were all less than the global limit.We conclude from this study that the environment of Amara city is within normal background radiation.

تصنيع ودراسة خواص معدن - فثالوسيانين العضويه كمتحسس حرارة Fabrication and Study Properties of Organic Metal - Phthalocyanine as Temperature Sensor

اسم المؤلف: رؤى مثنى علي
اسم المشرف: ندى خضير عباس
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Copper Phthalocyanine tetrasulfonic acid tetrasodium salt (CuPcTs) thin films with different annealing temperatures (100, 150 and 200)oC have been prepared by spin coating technique on glass & ITO substrate with speed rate of 1000 rpm for 1 min, the obtain films have 100±5 nm thickness. This dissertation deals with different measurement techniques (Thermal, Structure, Morphological, Optical and Electrical measurements) in order to investigate the optimum condition to fabricate sensor device.The structures of CuPcTs thin films which deposited on glass substrate have been studied by X - ray diffraction (XRD), Atomic Force Microscope (AFM) and (FESEM) techniques, XRD studies show that thin films have polycrystalline structure for all annealing emperatures with perfect orientation (001). Also the surface morphology by AFM measurement for CuPcTs thin films has been studied; it shows that all films after heat treatment go to Nano size. The roughness decreases with increasing temperatures, and by (EDX) technique the elemental ratios of thin films are determined.The optical measurement showed that the as - deposited and annealed films have two peaks which are (B, Q1and Q2) bands, B in Ultra Violet region attributed to transition between d level for Cu metal and π* in LUMO, and Q bands in Visible region attributed to the transition between π(HOMO) - π* (LUMO). These measurements demonstrated that the energy gap of CuPcTs depends on the annealing temperatures, the photoluminescence spectra (PL) showed the traps inside energy gap play an important role and effect onoptical behavior. It’s studied to confirm the results of optical band gap, FTIR spectra give results about the bonds of (CuPcTs) and its position compared with H2Pc as a reference. The electrical properties of these films were studied with differentannealing temperature. Hall measurements showed by increasing thin films temperature the conductivity decreased at 100oC then it increase at 150oC finally it returned to decrease that may be due to phase transitions, all the films are p - type.CuPcTs Capacitive - Resistive surface type temperature device sensor has been fabricated by using two electrodes (Aluminum and Silver), the capacitive response of this sensor was observed by Raising the temperature gradually.Capacitive - Resistive temperature sensor showed that the response to variation of temperature in range (RT - 200)0C and the response time ≈ 20±5 Sec. for two electrodes, The fabricated sensor appear enough sensitivity and good response and recovery times and strong affected by frequency variation.Practical experience has shown results that aluminum electrode has capacitance and resistance higher than the silver electrode depending on the different frequencies values, while the silver electrode has the shortest response time.

تقييم المقاطع العرضية لليورانيوم للتفاعلات المستحثة بالنيوترون Cross Sections Evaluation of Uranium for Neutron Induced Reactions

اسم المؤلف: روناك اكرام علي
اسم المشرف: ايمان طارق العلوي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: لقد تم في هذا البحث حساب قيم المقاطع العرضية لنظائر اليورانيوم (A=230 - 238) للتفاعلات المستحثة بالنيوترونات التالية ,,,(n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), (n,γ), (n,p), (n,t), (n,d), (n,α), (n,2α),and (n,2p)المقاسة بفترات مختلفة من الطاقة حيث ان هذه القراءات تم اخذها من الوكالة الدولية للطاقة الذرية (IAEA ) ومن المكتبات المشهورة عالميا مثل EXFOR, CINDA, ENDF, JEFF, JENDL,ROSFOND,CENDL,WIND, TENDL, BROND, IRDF, EAF وقد تم قياسها في الفترة الاولى من منتصف القرن الماضي وحتى اخر سنوات الماضية .لقد تم تحليل المديات الكاملة للطاقة لكل تفاعل وقد تم اعادة حساب وتقييم المقاطع العرضية ضمن فترات صغيرة مختلفة حسب مديات الطاقة للنيوترون القاصف مع الاخطاء المرافقة لها. قد تم وضع صيغ رياضية لمتعددة الحدود في معظم التفاعلات والتي تربط بين تغيير المقطع العرضي مع الطاقة والتي يمكن استخدامها للتنبىء بقيم المقاطع العرضية غير المحسوبة. لقد تم حساب قيمة Q - للتفاعل وطاقة الربط وطاقة العتبة وفرق الكتلة وعامل الرص لكل تفاعل ولكل عنصر هدف. ان التقييمات اعتمدت بشكل رئيسي على حسابات نموذج الجهد البصري لقد اعتمدت الحسابات على معاملات الجهد البصري النووي حيث تم اختيار وجمع المعلومات من مكتبة (RIPL) التابعة للوكالة الدولية للطاقة الذرية. لقد قمنا بدراسة صيغتين مختلفتين لنموذج الجهد البصري حيث ان الصيغة الاولى تسمى نموذج الجهد البصري القياسي والمعاملات ماخوذة من مكتبة Beijing والصيغة الثانية لنموذج الجهد البصري قد تم حسابها بتحديد ثلاث مديات طاقية. لقد قمنا بدراسة نسبة التفاعل (n,f) لكل نظير من نظائر اليورانيوم نسبة الى يورانيوم - 235 والذي يعتبر نموذج قياسي. لقد قمنا بحساب هذه النسبة لجميع التفاعلات المتوفرة لدينا وليس فقط تفاعل الانشطار واحتسبناها نسبة الى يورانيوم - 235.حساب اخر تم اضافته الى هذه الدراسة وهو دراسة تاثير التلوث لوليدة اليورانيوم - 237 والتي هي نبتونيوم - 237 بعمر نصفي 6.8 يوم وكذلك حساب الفيض النيوتروني لكل منهما. | The cross sections of Uranium isotopes (A=230 - 238) for the (n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), (n,γ), (n,p), (n,t), (n,d), (n,α), (n,2α),and (n,2p) reactions are calculated with different energy intervals which are collected from International Atomic Energy Agency (IAEA). The available cross sections data for the reactions mentioned above are collected from the well known international libraries like EXFOR, CINDA, ENDF, JEFF, JENDL, ROSFOND, CENDL, WIND, TENDL, BROND, IRDF, EAF and measured during the period from the middle of the last century up to several years ago.The cross sections are reproduced in fine steps of incident neutron energy in different intervals with the corresponding errors. The recommended cross sections for all available experimental data have been calculated for all considered reactions mathematical representative equations for all these reactions are formulated. These equations represent the variation of the cross section with energy, which could be used to predict the values of uncalculated cross sections.Q - value, threshold energy, binding energy, mass excess, and packing fraction for each reaction and target element have been also calculated.The evaluations are based mainly on the calculations of the optical model potential. The calculations are based on the nuclear optical potential, where the relevant parameters are collected and selected from Reference Input Parameter Library (RIPL) which is being developed under the international project coordinated by the International Atomic Energy Agency (IAEA). We study two different formula for optical model potential the first formula is the standard optical potential model and its parameters are taken from Beijing library. The second formula is the optical potential with different energy ranges. We study the ratio of the (n,f) cross sections for each Uranium isotopes relative to (n,f) cross section for U - 235 which could be considered as a standard sample. We have done the ratio not for the (n,f) cross sections only but also for other reactions like ,(n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), and (n,γ) relative to U - 235 reactions cross sections.Another evaluation is added to cross sections is the effect of the contamination of the daughter of U - 237 which the daughter is Np - 237 6.8day and their relative flux

دراسة تاثير المعاملة الحرارية على الخواص التركيبية والميكانيكية لبوليمر (بولي تيترافلورواثيلين) Study the Effect of Heat Treatment on the Structural and Mechanical Properties for poly (tetrafluoroethylene

اسم المؤلف: رند باسم لطفي الكرخي
اسم المشرف: مي عبد الستار محمد نجيب
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: درس في هذا العمل نوعين من بولي تيترافلورواثيلين ( النقيين ولكن باختلاف الشركة المصنعة PTFE) (صيني _اماراتي ) بطريقه صب المحلول كافلام رقيقه واشرطة , بواسطه الخواص التركيبيه (حيود الاشعه السينيه ومسعريه المسح التفاضلي ) والخصائص الميكانيكية بدلاله درجات حراره مختلفة للدوره الحرارية . يبين كلا النوعين تغير في الشده المستطاره من المستوى القاعدي (100) عند تغير درجه حرارة الدورة الحرارية واظهر النوعين زيادة في التبلورية مع زياة درجة الحرارة .كذلك اختلاف في الانثالبي عند اختلاف درجات الحرارة حيث لوحظ زياة الانثالبي بزيادة درجة الحرارة واختلاف في الخصائص الميكانيكيه ( الاجهاد والانفعال عند نقطة الخضوع ونقطه الكسر ومعامل يونك) للبوليمر حيث اظهرت المعالجة الحرارية للبوليمر بدرجات حرارة مختلفة من اجل معرفة خصائصه ومقاومته الى الظروف البيئية ان الخواص الميكانيكية تزداد زيادة خطيا مع زيادة درجة الحرارة .لوحظ بان انتاج الشركه المصنعة الصينية افضل من ناحية النتائج لايجاد درجة التبلورية والخصائص الميكانيكيه عن انتاج الشركة المصنعة الاماراتية لنفس المادة البوليمرية | In this study two modifications of pure polytetrafluoroethylene (PTFE) [C2F4]n. China_UAE source prepared from solution cast as film and strip have been studied by structural (X - ray diffraction (XRD), Differential Scanning Calorimetry (DSC)) and mechanical properties .subjected to different temperature heating cycle. Both modifications show variation in the scattered X - ray intensity of the basal plane (100) as the temperature of heating cycle is changed and show increasing in crystallinity with the increase of temperature .Moreover, the Enthalpy of each kind is changed with difference of heat treatment where the enthalpy increase with the increase of temperature, and two modifications show different in mechanical properties for PTFE (young's modulus, stress at break, stress at yield, elongation at yield. And elongation at break) when the temperature is change ,The heat treatment of polymer to different temperatures in order to know its properties and resistance to environmental conditions results showed that the mechanical properties increase linearly with the increase of temperature.It seems that the product company of china is better than the product company of UAE in degree of crystallinity and mechanical properties for this polymer.

الدراسه النظريه لتصميم ماكنه بؤره البلازما وتحقيق العوامل المختلفه التي تؤثر على حصيله النيترون المنبعث Theoretical study to design plasma focus machine and investigate various parameters that affect its emitted neutron yield

اسم المؤلف: رنا عيســـى بــك مــــراد
اسم المشرف: مصطفى كامل جاسم رعد حميد مجيد
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: فيزياء البلازما
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا البحث تم تصميم جهاز بؤرة البلازما الكثيفة نظريا بالاعتماد على موديل (لـــي) بناءا المعادلات الرياضية لنموذج لي لكل من هندسة القطبين وعناصر الدائرة الخارجية التي تضم متسعة ومحاثة ومقاومة (RLC). وبعد اجراء الحسابات اللازمة تم ادخال نتائج التصميم في برنامج لرؤية مدى امكانية تشغيله نظريا من خلال دراسة المعلمات المختلفة التي يوفرها البرنامج وبالتالي التعرف على ظروف تشغيله والعوامل المؤثرة عليه. لقد اختير غار الديترويوم كغاز عامل في هذه المنظومة للحصول على ناتج نيتروني من اجل التفاعل النووي الاندماجي. وتم اختبار ودراسة المنظومة عند ضغطين مختلفين (3و4 تور) حيث درست مختلف معلماتها التي يوفرها البرنامج ونوقشت وقورنت النتائج بالاشكال البيانية. اضافة لذلك تمت مقارنة المنظومة المصممة مع منظومة قياسية تناظرها من حيث التركيب النظري وهي منظومة NX2 التي بنيت اساسا للحصول على الاشعة السينية باستعمال غازات النبيلة. اختير في البحث ان يكون غاز الديتريوم هو الغاز العامل للحصول على ناتج نيتروني من اجل المقارنة، حيث درست جميع معلمات التشغيل للمنظومة المصممة مع القياسية بالرسوم البيانية.لقد وجد من خلال انجاز الحسابات اللازمة بان الشكل البياني لانحدار تيار الانبوب الكلي (dip) مباشرة بعد قمة التيار مع الزمن للمنظومة المصممة متفق تماما مع الشكل العام المميز لمنظومات بؤرة البلازما التجريبية دلالة على ان حسابات التصميم صالحة لهذه المنظومة وبالتالي يمكن اجراء الحسابات. ان تصرف فولتية الانبوب مع الزمن للمنظومة المصصمة كان بنفس الشاكله مع المنظومة القياسية. وينطبق هذا على سلوك المعلمات الاخرى بين المنظومتين مثل السرعة والمسار المحوريان والمسار الى الداخل للصدمة الشعاعية ومسار وسرعة استطالة القرص ومسار وسرعة الصدمة المنعكسة شعاعيا وغيرها.تم دراسة ومقارنة تغيرات درجة حرارة البلازما مع الزمن للمنظومتين عند نفس الضغط ولضغطان مختلفان للمنظومة المصممة وكان تصرف ماكنتا بؤرة البلازما بنفس الطريقة. وتم حساب الخسائر المتولدة من الماكنتان مثل خسائر جول وبرمنشتهالنك واعادة الاتحاد وخسائر الطاقة الشعاع الخطي مع الزمن. اخيرا وجد ان المنظومة المصممة ( 1.66 × neutron per shot ) توفر ناتج نيتروني اكبر من المنظومة القياسية (5.15 × neutron per shot) . لقد تصرفت المنظومة المصممة مثل المنظومة القياسية لكن كان الاختلاف في سلوك المنظومة المصممة والقياسية هو اختلاف الترتيب الهندسي للمنظومتين من حيث هندسة الاقطاب واختلاف قيم العناصر الكهربائية للدائرة الخارجية. ان المنظومة المصممة نظريا في هذا البحث يمكن ان تكون مشروع لبناء ماكنة بؤرة بلازما تطبيقية للحصول على ناتجها النيتروني العالي للاستفادة منه في اجراء تفاعل الاندماج النووي.

تصنيع ودراسة خصائص كاشف المفرق الهجين Cdo/ Si المشاب والمحضر بطريقة الرش الكيميائي الحراري Fabrication &Characterization Heterojunction Photodetector of Cdo/ Si by Spray Pyrolysis Technique

اسم المؤلف: رفل صالح ساجت فياض
اسم المشرف: سعاد غفوري خليل العاني رائد عبد الوهاب اسماعيل
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا البحث تصنيع ودراسة خصائص كاشف المفرق الهجين نوع CdO/p - Si المشوب اذ حضرت اغشية اوكسيد الكادميوم(CdO) بطريقة الرش الكيميائي الحراري وبدرجة حرارة قاعدة ثابتة 380o C) ) وبالتراكيز المولارية M(0.1, 0.15, 0.2, 0.25) وشوبت بعنصري النحاس والالمنيوم بنسب (0.5%, 1%, 3%, 5%) على الزجاج وعلى شرائح من السليكون احادية التبلور (Single Crystal) من نوع p - type ذات اتجاهية بلورية (100) ومقاومية كهربائية (2 - 20 Ω.cm) ومن نوع n - type ذات اتجاهية بلورية(100) ومقاومية كهربائية (10 Ω.cm) وسمك يتراوح بين (400 - 600 nm) .ودرست الخواص التركيبية والطوبوغرافية والبصرية والكهربائية لغشاء CdO بتغير التركيز المولاري وبثبوت درجة حرارة القاعدة (Ts) لقد اوضحت نتائج حيود الاشعة السينية ان اغشية CdO ذات تركيب بلوري مكعب وان اعلى شدة كانت عند المستوي (111) , اوضحت النتائج البصرية ان قيم فجوة الطاقة تعتمد بشكل كبير على التركيز المولاري اذ وجدت ان قيم فجوة الطاقة لغشاء CdO النقي كانت تتراوح مابين 2.61 eV الى 2.34 eV ولوحظ ان فجوة الطاقة تبدا بالنقصان مع زيادة التشويب بالالمنيوم والنحاس مقارنة مع اغشية CdO النقية . حيث ان فجوة الطاقة عند التشويب بالنحاس كانت تتراوح مابين 2.5 eVالى 2.31 eV وتتراوح مابين 2.62 eV الى 2.48 eV عند التشويب بالالمنيوم.اوضحت نتائج قياس تيار - جهد للكاشف الضوئي ان مقدار عامل المثالية (Ideality factor) للكواشف المحضرة بمولارية وتراكيز اشابة مختلفة يزداد مع زيادة التركيز المولاري وان افضل قيمة له كانت بحدود 1.7 عند تركيز 0.5% وبالنسبة لشوائب النحاس وبحدود 1.8 بالنسبة لشوائب الالمنيوم بتركيز 0.5% .اظهرت نتائج قياسات الاستجابية الطيفية ان الكواشف المصنعة تعمل ضمن المنطقة الطيفية (400 - 850nm) ووجود قمتين لكاشف (CdO/Si) المشوب وغير المشوب الاولى تقع عند الطول الموجي (550 nm) والتي تعود الى غشاء CdO والثانية عند الطول الموجي (800 nm) والتي تعود الى السليكون. لقد اوضحت نتائج الاستجابية الطيفية للضوء الابيض ان الكواشف تمتلك خصائص خطية جيدة ولاوجود لمنطقة اشباع وان هذه الخصائص تحسنت بعد الاشابة.تم حساب الكشفية النوعية للكواشف المصنعة ووجد انها تتغير مع ظروف التحضير حيث ان اعلى قيمة لها كانت بحدود 6*1011(HZ1/2.W - 1.cm) عند الطول الموجي 500nm وبلغت 7*1011(HZ1/2.W - 1.cm) عند الطول الموجي 700nm للكاشف المصنع CdO : Al/Si المشوب بتركيز 5% . | We discussed in this research Manufacturing and study the detector hybrid retail properties type CdO/ P - Si the doping ,If film were prepared the Cadmium Oxide (CdO), by the way chemical spraying with tempratuer the constant base (380oC) And molar concentrations (0.1, 0.15,0.2,0.25)M. It was the doping for two element Copper and Aluminum with percentages (0.5%, 1%, 3%, 5%) on the glass and the slides of Silicon crystallization single from p - type With crystalline directional (100) and Electrical resistivity (2 - 20 Ω .cm) and from N - type With crystalline directional (100) and Electrical resistivity (10 Ω .cm) at thickness between (400 - 600 nm).We study the Characteristics Synthetic and Optical and Electrical the film CdO , by change molar concentrations with tempratuer the constant base (Ts) , I have explained the results X - ray diffraction that film CdO With a cubic crystalline structure And that the highest intensity was at the level of (111), The results showed of optical that value Energy gap the large dependent on molar concentrations , It was found the value Energy gap they were between (2.34 ev - 2.61 ev) and It was found simpel change in Energy gap when the doping by Copper they were between (2.31 ev - 2,51 ev) and Improving Energy gap when the doping by Alminum they were between (2.48 ev - 2.62 ev).The results measure Current - Potential the optical detector there Ideality factor the detector Prepared with tempratuer the constant base and different molar concentrations where the value increases with molar concentrations decreases, and the better value they were limited 1.7 when concentration 0.5% for Impurities Copper , And limited 1.8 for Impurities Alminum when concentration 0.5%.The result measure Responsive spectral the detector Manufacture the work with in Spectral region (400 - 850 nm) , And found two value the detector (CdO/ Si) the doping and undoping , The first located when wevelength (550 nm ), which return to the detector CdO , The second when wevelength (800 nm ), which return to the detector Silicon. It was found the value Specifc Detectvity the showed the better value they were the detector CdO : Al/ Si the doping concentration 5% it was about 6*1011(HZ1/2.W - 1.cm) at the Wavelength (500nm) and 7*1011(HZ1/2.W - 1.cm) at the Wavelength (700nm).I have explained the results Responsive spectral for white light that the detector has liner properties and this properties improving after at dopend.

دراسة الخواص البصرية والكهربائية لمتراكبات PMMA/ اكسيد المعادن Study the Optical and Electrical Properties of PMMA/Metal Oxide Composites

اسم المؤلف: رسل طه حسين
اسم المشرف: رغد صبحي الخفاجي
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يهدف هذا البحث الى تحضير متراكبات ثلاثية هجينة من PMMA مقواة بجسيمات TiO2 - Al2O3 وZrO2 بتقنية الصب .تم استخدام كسور وزنية (84 - 92) wt % من بولي ميثيل ميثا اكريلك ونسبة ثابتة % (4) من تيتانيا مع نسب وزنية تتراوح بين wt % (4 - 12) للالومينا والزركونيوم. تم دراسة المواصفات التركيبية من خلال حيود الاشعة السينية ومجهر القوة الذرية. بينت فحوصات صور مجهر القوة الذرية تجانس في البناء البلوري. اما الخواص العزلية فقد فحصت من خلال قياس ثابت العزل عند مدى تردد (102 - 106) Hz وبينت النتائج ظهور تاثير طفيف عند اضافة الالومينا للمتراكب الهجيني (PMMA - TiO2 - Al2O3) مقارنة بمضاف الزركونيوم للمتراكب الهجيني (PMMA - TiO2 - ZrO2) حيث قيم ثابت العزل تزداد مع زيادة التركيز (3.408500 - 10.69851). في حين يتناقص عامل الفقد بزيادة التردد للمتراكبات (PMMA - TiO2 - Al2O3)و(PMMA - TiO2 - ZrO2) . قيست التوصيلية الكهربائية المستمرة لمدى درجات حرارية تتراوح بين ( 313 - 373 )K ولوحظت زيادة في القيم التوصيلية بزيادة التركيز ودرجة الحرارة (5.5E - 10 - 8.52E - 10) (Ω.m) - 1 في حالة الزركونيوم المضاف للمتراكب الهجيني. تم حساب الثوابت البصرية للعينات المحضرة كدالة للطول الموجي وذلك باستخدام مطياف بمدى nm( - 1100200). حيث تم حساب معامل الامتصاص، معامل الخمود، معامل الانكسار وفجوة الطاقة البصرية, ومن حساب النتائج نلاحظ ان قيم معامل الامتصاص ومعامل الخمود ومعامل الانكسار لل(PMMA - TiO2 - Al2O3) اعلى من (PMMA - TiO2 - ZrO2) كدالة للطول الموجي، نلاحظ ايضا، انخفاض في قيم فجوة الطاقة البصرية المسموحة eV (2.90 - 2.50) في متراكبات الالومينا بينما من (2.90 - 2.58) eV للزركونيوم. وكذالك فجوة الطاقة البصرية الممنوعة (2.85 - 2.48) eV الكترون فولت للالومينا بينما eV (2.85 - 2.52) للزركونوم . | This study aims to synthesize ternary hybrid composites PMMA polymer matrix with TiO2, Al2O3 and ZrO2 as additives using casting technique. the weight fractions of matrix with range (84 - 92) wt %, fixed percentage (4) % of TiO2 and range of weight fractions with range (4 - 12) wt % of Al2O3 and ZrO2 were used as started materials. Characterization properties were examined through XRD and AFM. Obtained micrograph and XRD revealed homogeneity structure for Al2O3 filler. Dielectric properties such as dielectric constant were carried for range (102 - 106) Hz frequency .The addition of Alumina filler exibits slightly effect on dielectric constant values for prepared ternary hybrid composite (PMMA - TiO2 - Al2O3 ) compared with ZrO2 for ternary hybrid composite (PMMA - TiO2 - ZrO2) where dielectric constant increases as concentration increases (3.408500 - 10.69851) . Dissipation factor decreases with increasing frequency in composite (PMMA - TiO2 - Al2O3) and (PMMA - TiO2 - ZrO2). DC electrical conductivity was conducted in temperature range ( 313 - 373 )K. Markedly increasing for the DC electrical conductivity of Zirconia filler with respect to additional concentration (5.5E - 10 - 8.52E - 10) (Ω.m) - 1 .Otherwise DC electrical conductivity increases versus applied temperature for both prepared composites. Optical constants (extinction coefficient, absorption coefficient, and Index of refraction), optical energy gap were obtained for prepared Specimens as function of wavelength using spectrometer at range (200 - 1100)nm. It was noticed that the values of extinction coefficient ,coefficient of absorption , and refractive index for (PMMA - TiO2 - Al2O3) are higher from that of (PMMA - TiO2 - ZrO2) as wavelength, also, more decreasing in allowed optical energy gap values from (2.90 - 2.50 eV) for Al2O3 filler and from (2.90 - 2.58 eV) for ZrO2 as additive. Also forbidden optical energy gap decreases in case Al2O3 from(2.85 - 2.48) eV while from (2.85 - 2.52) for ZrO2 as additive.

دراسة التركيب المتهيج للنوى زوجية - زوجية ذات العدد الذري Z= 50, 48, 46 في المستوى المتهيج الاول Study of Excited Structure for Even - Even Nuclides of Z = 50, 48, 46 in The First Excited State

اسم المؤلف: رسل سعد هادي
اسم المشرف: فاطمة عبد الامير جاسم
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: درست الخواص الكهرومغناطيسية للنظائر زوجية - زوجية للنوى 48Cd , 50Sn و46Pd الغنية بالنيوترونات من خلال قوى الانتقال لرباعي القطب الكهربائي |M(E2)|2 W.u ↓ واحتمالية الانتقال المختزل B(E2)W.u ↓ لانتقال اشعة كاما من المستوى المتهيج الاول الى المستوى الارضي. حيث تم حساب قوى الانتقال لرباعي القطب الكهربائي |M(E2)|2 W.u ↓ بالاستعانة بمعدل العمر للمستوى المتهيج الاول والشدة النسبية لاشعة كاما المنبعثة من ذلك المستوى, بينما قيم احتمالية الانتقال المختزل B(E2)W.u ↓ استخرجت من خلال عمر النصف للمستوى المتهيج الاول المصحح لمعامل التحول الداخلي.وللحصول على قيمة دقيقة لانتقال رباعي القطب الكهربائي ↓ E2, تم حساب ورسم القيم المتبناة لكل من |M(E2)|2 W.u ↓ وB(E2)W.u ↓ كدالة لعدد النيوترونات.في هذا البحث, تم تحويل القيم المتبناة لانتقال ↓E2 الى قيم احتمالية الانتقال المختزل B(E2) ↑ e2b2 والتي افادتنا في دراسة تركيب النوى من حيث الاختلاف في الشكل لان عامل التشوه β تم استخراجه من B(E2) ↑ e2b2, كما ان دراسة تاثير عدد النيوترونات على سلوك كل من B(E2) ↑ e2b2 وβ في المتسلسلات الايزوتونية لنوى 48Cd , 50Sn و46Pd يعطي معلومات جيدة حول التشوه في النوى.تركزت دراستنا على ثلاث انواع مختلفة من النوى, الاول بعدد ذري سحري50 , والثاني بعدد ذري شبه سحري 48, والثالث بعدد ذري بين القشرات المغلقة 46.في نهاية العمل الحالي تم عمل مقارنة جيدة للحسابات الحالية لقيم احتمالية الانتقال المختزل B(E2) ↑ e2b2 وعامل التشوه β مع معظم القيم العملية والنظرية الحديثة. | Electromagnetic properties for even - even nuclides in neutron - rich nuclei such 50Sn, 48Cd and 46Pd have been studied through the electric quadruple transition strength |M(E2)|2 W.u ↓ and the reduced transition probability B(E2)W.u ↓for γ0 - transition from first excited state to the ground state. The electric quadruple transition strength |M(E2)|2 W.u ↓ is calculated by using life - time for excited state with the intensity of γ0 - transition, while B(E2)W.u ↓ is extracted from half - life time to state corrected for internal conversion coefficient. To obtain precise value for the transition of E2↓, the adopted value for |M(E2)|2 W.u ↓ and B(E2)W.u ↓ was calculated and plotted as a function for neutron number. In present work, the adopted values for the transition of E2↓ are converted to B(E2)exp ↑ e2b2 which helped us to study the structure for nucleus, such as the variation in shape, because the deformation parameter β is extracted from B(E2) ↑ e2b2 and the study for behavior of each of B(E2) ↑ e2b2 and β versus neutron number in isotonic chains to 50Sn, 48Cd and 46Pd gives good information about the deformation in nuclei. Our study focused on the three different types of nuclei, the first with atomic magic number 50, the second with semi - magic atomic number 48 and the third nucleus with atomic number between closed shells 46. At the end of the present work, the good comparisons for the present calculation to the values of the B(E2) ↑ e2b2 and β with most recent values of experimental and theoretical was done.

دراسة طيفية لبعض الجزيئات ثلاثية الذرات باستخدام الطرق شبه التجريبية Spectroscopic study of some tri atomic molecules using semi - empirical methodes

اسم المؤلف: ذكرى كمال طه
اسم المشرف: زياد عدنان صالح
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تــم في هــذا البحث دراسـة الخـواص الطيفيه كجهد التاين , الالفه الالكترونيه وقيم الطاقه للمدارات الجزيئيه المشغوله بالالكترونات (EHOMO)، والفارغة من الالكترونات (ELUMO) وفجوة الطاقة وكذلك حساب الكهروسالبيه والصلاده الكيميائيه والنعومه (قابلية التفاعل). لبعض الجزيئات ثــلاثيـة الـــذرات نظـــريا , اذ ان الجزء النظري تمت دراسته من خلال استخدام برنامج كاوسين (Gaussian09 لبعض الجزيئات الثلاثية الذرات كجزيئة ثاني اوكسيد الكربون , الماء , الاوزون , هيدروكسيد الصوديوم , كبريتيد الهيدروجين وكلوريد المغنسيوم وذلك باستخدام برامج الكم شبه التجريبية التي تستغرق مدة زمنية للحسابات (PM3,PM6) قياسا الى الطرائق المتقدمه التي استخدمت في البحث هي طريقتا دوال الكثافة وهارتري فوك ( HF, DFT ) وباستخدام عناصر مجاميع اساس مختلفه . تم رسم الشكل الهندسي الفراغي الاكثر استقرارا اعتمادا على المحاور الداخلية (˚r,θ˚,Φ)f ومنها تم حساب اطوال الاواصر والزوايا المحصورة بينها وعزمي القصور الذاتي وثنائي القطب , ثوابت الدوران , الكتله المختزله , طاقة نقطة الصفر والاستقطابيه وطاقات المستويات الاهتزازية المنشطرة نتيجه لتاثير رينر - تيلر , ومضاعف - - ℓ وحساب الانتقالات بين المستويات الاهتزازيه كذلك حساب الطاقه الكليه للجزيئات كافه. كذلك تم حساب ترددات انماط الاهتزاز الاساسية للجزيئه ورسمها ضمن منطقة الاشعة تحت الحمراء من الطيف الكهرومغناطيسي . اذ توصلت الحسابات النظرية ان قيم مضاعف - ℓ - تزداد كلما انتقلت الجزيئات الى مستويات طاقة اعلى واما بالنسبة لحسابات تاثير رينر - تيلر وجد انها تسبب في انشطار مستويات الطاقة الاهتزازية بالنسبة لكل الجزيئات في المستويين الاهتزازيين (1,0,1) و(2,2,0) لهما مقدار الطاقة نفسه . اضافة الى جانب وجود مستويات طاقة اخرى منشطرة متقاربة في قيم طاقاتها . | The study of spectral properties such as ionizations potential, electron affinity, electronegative, chemical hardness, softness and electrophonic index from inharmonic potential energy curve, spectroscopic dissociation also calculated EHOMO, ELUMO and energy gap Eg by theoretical parts .this studies by using Gaussian 09 (Gaussian 09 Revisioon - A - 02 - SMP) program of some tri - atomic molecules such as (CO2, H2O ,O3 NaOH ,H2S , MgCl2 molecules ) using semi empirical quantum programs , By using semi - empirical (PM3,PM6) , density functional theory and Hartree - Fock (DFT ,HF) methods this by using different basis sets So after drawing structure optimization of molecules depending on the internal coordinate f(r,θo,φo), then calculate length of bonds and angles between it , moment of inertia, dipole moment for Molecules by quantum mechanics methods which, then we calculated the orbital energy values (EHOMO ) and (ELUMO) ; and from these values ; ionization energy was calculated for molecule by take absolute values to (EHOMO )A computational calculation is a valuable tool for estimating the (geometry, total energy, electronic properties, dipole moment, polarizability, electrostatic surface potential, vibration frequencies) of molecular structures. The IR spectrum of molecule primitive vibration frequency located within infrared region from spectrum ranged is obtained Then - ℓ - type doubling we conclude that values increasing with it exited to high levels , from Renner - Teller effect cause splitting of energy of or vibrational state (1,0,1) , (2,2,0) have the same energy

تقدير الحاصل النيتروني لبعض نوى النظائر المتوسطة نتيجة لتفاعلات البروتون وجسيمات الفا والنيوترون لمدى طاقة (E=10 - 50) MeV

اسم المؤلف: رافت عبد الحسن مسلم
اسم المشرف: خالد هادي مهدي العبيدي
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: للنظائر اهمية كبيرة في كثير من المجالات مثل المجالات البحثية والصناعية والطبية ومجالات اخرى. فبعضها يحتاج لنظائر بنصف عمر طويل او بنصف عمر قصير وحاصل نيتروني عالي او قليل للحالتين, لذا تضمن هذا العمل دراسة الخصائص النووية لتسعة عناصر متوسطة الاعداد الكتلية هي (Ca ,Sc ,Ti ,Ni ,Cu ,Zn ,Zr ,Nb ,Mo ), ولكل عنصر تم اختيار عشرة نظائر لذا تضمنت الدراسة 90 نظير اعدادها الكتلية بين (41 الى 96) , شملت هذه الدراسة حساب طاقة التفاعل, طاقة العتبة, الكتلة المختزلة, طاقة فصل النيوترون وطاقة الربط النووية لتفاعلات ,Ca(α,n)Ti Ni(α,n)Zn , Zr(α,n)Mo , ,Sc(p,n)Ti ,Cu(p,n)Zn Nb(p,n)Mo , ,Ti(n,n)Ti Mo(n,n)Mo ,Zn(n,n)Zn لنظائر العناصر اعلاه , كما تم حساب قدرة الايقاف باستعمال برنامج (SRIM 2013) ومن ثم حساب الحاصل النيتروني من المعادلات النظرية اعتمادا على احدث ما نشر من المقاطع العرضية للعامين (2010 ,2012 ), كما تم في هذه الدراسة استخراج مجموعة من المعادلات شبه التجريبية الموحدة لحساب المحصول النيتروني لهذه العناصر بشكل مباشر لنوعين من التفاعلات (α,n) و(p,n) والتي كل منها يشتمل على عشرة نظائر ليكون المجموع 60 تفاعل, نتائج الحاصل النيوتروني المحسوبة من هذه المعادلات اعطت توافقا جيدا مع القيم النظرية التي حسبت من المعادلات النظرية. هذه المعادلات مع ثوابتها وضعت ضمن برنامج ماتلاب صمم لهذا الغرض وبالاعتماد على نوع العنصر ونوع التفاعل وطاقة الجسيم الساقط لايجاد الحاصل النيتروني لاي نظير عدده الكتلي بين (40 - 100 ) لمدى طاقة يتراوح بين (15 - 50) مليون الكترون فولط. يمكن تطوير البرنامج ليشمل عدد اكبر من العناصر بنظائرها ولمديات طاقة اوسع. | Isotopes have a great importance in many fields such as research, industrial, medical and other. Some of them need isotopes with long half life or short half - life with high neutron yield or less for them. So this work included the study of the nuclear properties for nine medium elements (Ca, Sc, Ti, Ni, Cu, Zn, Zr, Nb and Mo), from each element we choose 10 isotopes, so the total are 90, their masses numbers were between (41 to 96), this study included the calculations of the Q - value reaction, threshold energy, reduced mass, separation energy of neutron and the binding energy for nuclear reactions , Ca(α,n)Ti , Ni(α,n)Zn , Zr(α,n)Mo , Sc(p,n)Ti , Cu(p,n)Zn , Nb(p,n)Mo , Ti(n,n)Ti Mo(n,n)Mo and Zn(n,n)Zn for the isotopes of the above elements, also we calculated the stopping power by using a (SRIM 2013), then the neutron yield was calculated from theoretical equations depending on most recent cross - sections (2010.2012), as well as this study focused on the extraction of a set of uniform empirical equations to calculate the neutron yield in directly for (α, n) and (p, n) reactions for these elements, and each of them includes 10 isotopes so the total reactions are 60. The result of neutron yield for these equations was in a good agreement with theoretical value which is calculated from the theoretical equations. These set equations with their coefficients were put within the MATLAB program, it was designed for this purpose and by depending on the element type, the type of reaction and incident particle energy to find the neutron yield for any isotope, their mass number is between (40 - 100) for energy range within the (15 - 50) MeV. This program can be developed to include a greater number of elements with their isotopes and for larger energy range.

تصنيع كواشف ضوئية باستخدام اوكسيد التيتانيوم المطعم باوكسيد الخارصين ذو التركيب النانوي بواسطه تقنية الليزر النبضd Fabrication of photovoltaic detectors using TiO2 doped with ZnO nanostructure by PLD technique

اسم المؤلف: ذرى طارق عباس
اسم المشرف: سمر يونس الدباغ
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: In this work, a Nd : YAG laser beam (λ=1064nm, repetition rate 6 Hz with the pulse duration 10ns) has been used to deposit thin films TiO2 pure and TiO2 doped with ZnO at different concentrations (2%, 5%, 7%) on glass and silicon substrates. The laser fluence is kept at 700 mJ/cm2 and the pressure is kept at 10 - 2 mbar to specify the optimum condition of deposition. TiO2 - ZnO thin films are investigated by using different techniques such as X - Ray Diffraction (XRD), Atomic Force Microscope (AFM), UV - VIS transmittance spectroscopy, Hall Effect and detector properties equipment.X - Ray Diffraction (XRD) results showed that by increasing ZnO concentration and annealing temperature (500°C) TiO2 transformed from amorphous structure to polycrystalline structure. AFM results showed that the RMS and the grain size was increased with increasing the concentration of zinc oxide. The root mean square (RMS) reachs to 15.2 nm at room temperature and after annealing temperature at 500°C reachs to 16.1nm. Also, the grain size increased with increasing ZnO concentration up to (100.12) nm at the concentration 7% after annealing temperature. UV - VIS transmittance measurements show that the transmittance were high in infrared region and decreases with increasing ZnO concentration and after annealing. Hall Effect is studied to estimate the type of carriers. From the results it was deduced that all (TiO2 : ZnO) films were n - type. As a result, it has been found that film structure and properties are dependent on annealing , as well as different concentrations.From the (I - V) measurements by using UV laser diode with a wavelength (385nm) found that the responsivity of the detector increased at concentration 7% reach to (3.39)A/W and after annealing in temperature 500°C reach (3.82)A/W.

دراسة تاثيرات خسارة الانحناءات لليف البصري في منظومة الاتصالات البصرية Study Effects of Optical Fiber Bending Loss in Optical Communication System

اسم المؤلف: دعاء هشام محمد
اسم المشرف: سمر يونس الدباغ
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا البحث , تم دراسة تاثير الانحناء على انتقال الاشارة الضوئية خلال الالياف البصرية. هذا العمل يتضمن قياسات الخسارة في القدرة خلال الليف البصري بوجود الانحناءات عند عدد لفات مختلفة من (1 - 10) لفة وعند اقطار انحناء مختلفة (12.5 , 10.5 , 8 , 6 , 4 , 3 , 2 , 1) cm. نوعين من الالياف البصرية تم استخدامها , الليف المتعدد الانماط (MMF ) باطوال مختلفة (1 , 20 , 40 , 100 , 120 , 140 ) m وليف احادي النمط بطول (4.5 m) .واستخدم نوعين من الليزرات ليزر دايود الاحمر (λ=650 nm) وليزر دايود اخضر (λ=532 nm).القدرة الضوئية تم قياسها باستخدام جهاز قياس القدرة. تشير النتائج ان كلما قل قطر الانحناء وزادت عدد اللفات فان الخسارة في القدرة الضوئية تزداد. حيث ان القدرة الضوئية لليزر الاخضر عند الطول الموجي (λ=532 nm) تقل من (48.083*10 - 4) mW الى (41.114*10 - 4) mW عند اللفة الاولى لليف متعدد الانماط بطول (40m) عندما تم حني الليف من cm12.5 الىcm 1. اما لليف الاحادي النمط, فان القدرة الخارجة لليزر الاخضر عند طول موجي (λ=532 nm) تقل من (13.608) mW الى (13.32) mW عند اللفة الاولى من طول (4.5) m لليف احادي النمط عندما تم حني الليف من 12.5 cm الى 3 cm . اظهرت النتائج ايضا ان تاثير الانحناء في القدرة الخارجة في حالة الليف المتعدد الانماط اكبر مقارنة بالليف احادي النمط. وكذلك النتائج لهذا البحث تتضمن تصميم وتنفيذ منظومة اتصال الالياف البصرية لفحص تاثير الانحناء على الاشارات المنتقلة خلال الالياف البصرية متعددة الانماط حيث لف من (1 - 10) لفة وعند اقطار انحناء مختلفة ( 1,2,3,4 ) cm . تم تضمين الاشارات باستخدام ليزر nm 532 .الاشارة تم ارسالها خلال ليف متعدد الانماط باطوال مختلفة وهذه الاشارة تم الكشف عنها باستخدام كاشف السليكون الضوئي (AEPX 65) . وجد ان الانحناءات تؤدي الى تغييرات واضحة في سعة ( جهد ) الاشارة الخارجه ؛ حيث يقل الجهد من 0.64volt الى 0.52 volt عند زيادة عدد اللفات من) 1 - (10 لفة في ليف بطول 40m وقطر الانحناء (1) cm.ويقل الجهد الى حد 0.2 volt في ليف بطول 140m وقطر الانحناء (1) cm.واخيرا الاشارات المنتقلة فيمنظومة الياف بصرية باستخدام كاميرا (CCD) واستخدام حاسبة شخصية معUSB TV STICK لرؤية تاثير الانحناء على انتقال الاشارات خلال الالياف البصرية. حيث ان الاشارة الخارجة ستقل من 0.68 volt الى 0.6 volt عندما عدد اللفات تزداد من (1 - 5) لفة في ليف بطول (1) m .اجرى احتساب كل من نسبة الاشارة الى الضوضاء ومعدل الخطا في نقل البيانات في للاشارات المنتقلة في منظومة الاتصالات عند اقصى طول لليف البصري 140m وعند اللفة 10 فكانت 115.147dB و3.68x10 - 27 على التوالي . بينما نسبة الاشارة الى الضوضاءSNR ومعدل الخطاBER في نقل البيانات في الاشارات المنتقلة باستخدام كاميرا CCD عند طول الليف البصري 1m وعند اللفة 10 فكانت 100.49dB و5.98x1o - 24 على التوالي .. اظهرت النتائج ايضا ان نسبة الاشارة الى الضوضاء تقل ومعدل الخطا في نقل البيانات يزداد بزيادة عدد اللفات في كلا المنظومتين | In this work, bending loss effects of optical fiber on the transmitted signal were studied.This work includes measurements of the power loss through optical fiber with the presence of bends at different wrapping turns (1 - 10) turns and at various bending diameters (12.5, 10.5, 8, 6, 4, 3, 2, and 1) cm. Two types of optical fibers were used, multimode optical fiber (MMF) of different lengths (1, 20, 40, 100, 120, 140) m and a single mode optical fiber (SMF) of length (4.5 m). Two optical sources were used, Red laser diode (λ=650 nm) and green laser diode (λ=532 nm). The output power was measured using an optical power meter. Results indicated that as the bending diameter decreased and the number of wrapping turns increased, the power loss increased. The output power of green laser diode at (λ=532 nm) decreased from (48.083*10 - 4) mW to (41.114*10 - 4) mW at the first turn of 40m MM fiber length when bent from (12.5 to 1) cm. For SMF, the output power of green laser diode at (λ=532 nm) decreased from (13.608) mW to (13.32) mW at first turn of (4.5) m SM fiber length when bent from (12.5 to 3) cm. The higher alteration output power in the case of multimode fiber has been deduced as compared with that of the single mode fiber. Also the results of the project involves a design and an implementation optical fiber communication system to investigate the effect of bending on the transmitted signals through multimode optical fiber wrapped (1 - 10) turns and at different diameters (1, 2, 3, 4) cm . Signals were modulated using 532nm laser diode then sent through multimode fiber of different lengths and detected by silicon photo detector (AEPX 65). The bending induces changes in the amplitude (voltage) of the output signal, the output voltage decreased from 0.64 volt to 0.52 volt when the no. of turns increased from 1 - 10 turns for 40 m optical fiber at a bending diameter of (1cm) and decreased to 0.2 volt for 140m multimode fiber at a bending diameter of (1cm).Finally, a transmitted signal in optical communication system has been built using CCD camera and Pc with USB TV STICK for monitory the effect of bending on signals that transmitted through optical fibers. The output transmitted signals decreased from 0.68 volt to 0.6 volt when the no. of turns increased from 1 - 5 turns for 1 m optical fiber. The calculations of signal to noise ratio (SNR) and Bit Error Rate (BER) for transmitted signals in optical communication system at maximum fiber length of 140m and 10turns are equal to 115.147dB and 3.68x10 - 27 respectively. While for transmitted signal form CCD camera at fiber length 1m and of 10 turns are equal to 100.49dB and 5.98x1o - 24 respectively.Results show that SNR decreased and BER increased as no. of wrapping turns increased for both systems.

الخواص الالكترونية لمادة هجينة مركب ثلاثي - خماسي/كرافين : حسابات نظرية دالية الكثافة Electronic Properties of III - V Compound / Graphene Hetero Material : Density Functional Theory Calculations

اسم المؤلف: حوراء علي عبد الرضا
اسم المشرف: حامد ابراهيم عبود محمد التميمي صباح نوري مزهر
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: فيزياء الالكترونيات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: هذه الاطروحة هي دراسة نظرية للخصائص التركيبة والالكترونية لمجموعتين من اوراق الجرافين. وتضمنت المجموعة الاولى ثلاثة اوراق جرافين نقية ذات اطوال مختلفة GR1 ˃ GR2 ˃ GR3، وتمثل المجموعة الثانية ثلاثة اوراق متغايرة من جرافين - مركبات B/P والتي تم بنائها اعتمادا على GR1. تم تنفيذ العمليات الحسابية باستخدام تقريب الكثافة الموضعي / LDA / SZ لنظرية دالية الكثافة. وقد استخدم برنامج Gauss View 5.0.8 لتصميم تراكيب اوراق الجرافين النقية والمشوبة. في البداية، تمت عملية استرخاء هذه التراكيب عن طريق استخدام طريقة PM6 شبه التجريبية مع الدالة الهجينة B3LYP - DFT عند حزمة من برامج Gaussian 09 وبعدها تمت عمليه استرخاء التراكيب باستعمال برنامج SIESTA trunk - 462 من خلال تطبيق نظرية دالية الكثافة LDA / SZ. يلاحظ من نتائج الخصائص التركيبية لاوراق الكرافين المدروسة ان هناك استرخاء جيد لهذه التراكيب، تبقى قيم الاواصر في اوراق الكرافين النقية C - C، C⚍C وC - H في نفس المديات لتراكيب حلقات الكربون. كذلك، ان اضافة مركباتB / P في ورقة الجرافين النقية لبناء اوراق الجرافين المتغايرة لم يؤثر على الخصائص التركيبة للتركيب الاصلي . وان الالتواء الملاحظ في حلقات الفينيل في مناطق الاتصال مع الحلقات المطعمة ياتي من زوايا الالتواء بين ذرات مختلفة بسبب اختلاف الكتلة الذرية والكهروسالبية لذرات B، P وC. تم استخدام نظرية دالية الكثافة LDA / SZ في برنامجGollum لحسابات الخصائص الالكترونية لمجموعتي اوراق الجرافين. ان نتيجة الطاقة الكلية لاوراق الجرافين المدروسة هو انعكاس لطاقة الربط لكل تركيب وتشير الى ان هذه التراكيب تمتلك استرخاء جيد ، وتاثير اضافة ذراتB وذرات P في ورقة الجرافين النقية GR1 كان له دور فعال على الطاقة الكلية للجزيئة. نبين ان كل اوراق الجرافين لها موصلية عالية وفجوة طاقة ممنوعة صغيرة، لكنها تتذبذب تبعا لطول وشكل كل ورقة وعدد وموضع ذرات B وP في الورقة. واظهرت القيم المحسوبة لطاقة فيرمي EF بان قيم EF لاوراق الجرافين النقية تتزايد مع تناقص طول الورقة. وباضافة ذرات B وP باشكال وهيئات مختلفة في GR1 سوف يغير من موقع مستوى فيرمي، ان كافة الاوراق المطعمة لها EF اكبر تقريبا من GR1. وياتي ذلك من اضافة مركبات B / P في GR1 الذي اعطى للورقة خصائص الكترونية جديدة.ان طاقة التاين IE والالفة الالكترونية EA لاوراق الجرافين النقية تنخفض قليلا مع تناقص طول الورقة. وكافة اوراق الجرافين المطعمة لها قيم منخفضة من IE وEA بالمقارنة مع GR1 النقي. ايضا، تظهر نتائجنا ان جميع اوراق الجرافين النقية والمطعمة تمتلك صلادة كهروكيميائية H عالية ومرونة الكترونية S عالية . المرونة الالكترونية العالية ستفتح افاق مستقبليه كاشارة لفجوة حزمة للتركيب مما يجعله يكون مرنا نوعا ما ، ان الكهروسالبية X قد انخفضت مع تناقص طول اوراق الجرافين النقية ، وX لاوراق الجرافين المطعمة هو اقل منها لورقةGR1 ، وهذا يعني ان الالكترونات في هذه الاوراق المطعمة لديها ميل كبير للهروب.واظهرت النتائج ان التوصيليات الكهربائية والحرارية لاوراق الجرافين النقية تكون في الترتيب GR1 ˃ GR3 ˃ GR2 ، التوصيلة الكهربائية والتوصيلة الحرارية لاكبر ورقة تكون هي القيم العليا، وهذا يرجع الى ان GR1 لديه قنوات متعددة لنقل الالكترون، من ناحية اخرى، القيم العليا لفجوة الطاقة خفضت التوصيلة الكهربائية والتوصيلة الحرارية. في حين، ان التوصيلة الكهربائية، وبالتالي ,التوصيلة الحرارية لاوراق الجرافين المطعمة كانت في الترتيب GR6 ˃ GR5 ˃ GR4، وبزيادة عدد ذرات B وP في الورقة انخفضت التوصيليات الكهربائية والحرارية. في جميع الحالات ، ان GR1 النقي لديه قيم توصيلية كهربائية وحرارية اعلى من تلك التي للاوراق المطعمة .ان النتيجة القيمة للغاية تم الحصول عليها من خصائص I - V للتراكيب المدروسة حيث ان سلوك التحسس قلل تماما من تاثيرات درجة الحرارة العالية التي تظهر في الاجهزة الكبيرة القديمة. وتشير حسابات I - V ان التفاعل المناسب مع الاقطاب يكون تاثيره محدودا الى حد ما على سلوك التحسس لاوراق الجرافين النقية والمطعمة. ان نتائج التحسس نتجت من تقليل فجوة الطاقة بين HOMO للورقة ومستوى فيرمي لقطب الذهب في الحيز الامامي والعكسي . ومن نتائج معامل Seebeck، يظهر لنا مساهمة متماثلة لتراكيز الالكترونات والفجوات حول منطقة الطاقة، وقد تبين ان الورقة الاكبر GR1 تملك القيمة الاقصى لمعامل Seebeck . وقد لوحظ ان معاملات الانتقال لاوراق الجرافين النقية تحدث على طول مدى واسع من طاقة الالكترون لانها لا تحوي منطقة استطارة. ايضا، ان الورقة مع عدد قليل من ذرات B وP كالحلقة النقطية في منتصف الورقة GR6 لها قيمة عالية من معامل الانتقال ، وهذا بسبب العدد الكبير من القنوات المفتوحة. وبشكل عام، معامل الانتقال للاوراق المدروسة لديها مدى واسع على نطاق الطاقة | This thesis is a theoretical study of structural and electronic properties of two groups of graphene sheets. The first group included three pure graphene sheets of different lengths GR1 ˃ GR2 ˃ GR3, and the second group represents the three sheets of heterojunction graphene - B/P compounds which were constructed on the basis of GR1.The calculations are carried out using the Local Density Approximation/Single Zeta LDA/SZ density functional theory. Gauss View 5.0.8 program was used to design the structures of pure and doped graphene sheets.Initially, these structures are relaxed by employing the PM6 semi - empirical method with the hybrid functional B3LYP - DFT at Gaussian 09 program package , and then they are relaxed at SIESTA - trunk - 462 of program by employing the LDA/SZ density functional theory. The results of the structural properties of the studied graphene sheets showed that there is good relaxation of the structures, the values of C - C, C⚍C and C - H bonds in pure graphene sheets remain in the same ranges of the carbon rings structures. So, the addition of B/P compound in pure graphene sheet to construct the heterojunction graphene sheets has no effect on the structural properties of the original structure. The screw observed in phenyl rings at the contact regions with the doped rings comes from the twist angles between different atoms due to the difference of the atomic mass and electronegativity of B, P and C atoms. The LDA/SZ density functional theory at the Gollum program was used for the calculations of the electronic properties of the two groups of graphene sheets. The result of the total energy of the studied graphene sheets is a reflection of the binding energy of each structure and indicates that these structures have good relaxation, and the effect of adding B and P atoms in pure graphene sheet GR1on the total energy of the molecule is effective. We showed all graphene sheets have high conductivity and small forbidden energy gap, but it vibrates depending on the length and shape of each sheet and the number and position of B and P atoms in the sheet. The calculated values of Fermi energy EF showed that the EF values of pure graphene sheets increase with decreasing the length of the sheet. Adding the B and P atoms in various shapes and forms in GR1 changes the position of Fermi level, all the doped sheets have EF approximately greater than that for GR1. This comes from the addition of B/P compound in GR1which gave the sheet new electronic properties. The ionization energy IE and electron affinity EA of the pure graphene sheets slightly decrease with decreasing the length of the sheet. And all doped graphene sheets have low values of IE and EA in comparison with the pure GR1. Also, we showed that all the pure and doped graphene sheets have low electrochemical hardness H and high electronic softness S. High electronic softness will pave the way for future prospects as a sign for that band gap of the structure wich becomes rather soft, the electronegativity X was decreased with decreasing the length of the pure graphene sheets, and the X of the doped graphene sheets is less than that for GR1, that means the electrons in these doped sheets have a large escaping tendency. The results showed that the electrical and thermal conductivities of the pure graphene sheets are in the order of GR1 ˃ GR3 ˃ GR2, the electrical conductivity and the thermal conductivity of the largest sheet are the higher values, this is due to the fact that GR1 has multi channels of electron transfer,and on the other hand, the higher the value of the energy gap,it decreased the electrical conductivity and the thermal conductivity. While, the electrical conductivity and therefore, the thermal conductivity of the doped graphene sheets are in the order of GR6 ˃ GR5 ˃ GR4,and by increasing the number of B and P atoms in the sheet, the electrical and thermal conductivities decreased. In all cases, the pure GR1 has values of electrical conductivity and thermal conductivity higher than those for the doped sheets. A very valuable result was obtained from I - V characteristics of the studied structures, in which the sensing behavior completely reduces the high temperature effects that appear in the old macro devices. The I - V calculations suggest that the suitable interaction with the electrodes have a rather limited influence on the sensing behavior of the pure and doped graphene sheets . The sensing results from the lowering of the energy gap between the HOMO of the sheet and the Fermi level of the gold electrode in the forward and reverse bias. From the results of the seebeck coefficient, we showed symmetrical contribution of electrons and holes concentrations around the region of the energy, it is found that the largest GR1 has the maximum value of seebeck coefficient. The transmission coefficients observed for the pure graphene sheets take place along a wide range of electron energy because they have not got a scattering region. Also, the sheet with small number of B and P atoms as a dot doped ring in the middle of the sheet GR6 has high value of transmission coefficient, this is due to high number of open channels. In general, the transmission coefficient of the studied sheets has a wide range on energy scale

تحضير ودراسة سلوكيات الرص لمتراكبات (الومينا - المنيوم) Preparation & Studying the Compaction Behaviors of the (Alumina - Aluminum) Composite

اسم المؤلف: حنان جميل مصطفى
اسم المشرف: عبد الحميد رحيم مهدي الصراف
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم تحضير المتراكب السيرميتي (سيراميك - معدن) من مادة الالومينا (Al2O3 - γ( كمادة اساس، ومن معدن الالمنيوم (Al) كمادة تدعيم، لتراكيز مختلفة من الالمنيوم (0 - 50)%، ونسبة زيادة التدعيم 10)%).تمت عملية التشكيل باستعمال الضغط باتجاه واحد، وانجزت عملية التلبيد في جو مفرغ من الهواء. درست سلوكيات الرص بحالة التلبيد الصلبة عند درجات حرارة التلبيد (400، 450، 550) م° ، وازمان التلبيد (2، 4، 6) ساعات، وعند ضغوط تشكيل (50، 100، 150) بار، تم الحصول على افضل الخواص الفيزيائية عند (550م°، 2ساعات، 150ساعة). تمت دراسة حالة تلبيد الطور السائل كدالة لتغير نسبة الالمنيوم في المتراكب عند (800م°، 2ساعة، 150بار)، بناء على ما تم التوصل اليه من خواص فيزيائية جيدة عند حالة التلبيد بالطور السائل، اختيرت هذه المواصفات لدراسة تاثير تغير الضغط عند (50، 100، 150) بار على الخواص الفيزيائية للمتراكبات السيرميتية المحضرة. اظهرت السلوكية عند المنطقة التي تحتوي تركيز الالمنيوم (40 - 50)% افضل الخصائص الفيزيائية، تبعا لذلك، درست اغلب القياسات على التركيز صاحب نسبة 50% من مادة الالمنيوم. المفهوم الاساسي الذي تضمنته هذه الدراسة هو التلاصق الفيزيائي بين مكونات المتراكب السيرميتي المحضر، والذي كان واضح من فحص انحراف الاشعة السينية. كذلك من الفحص المجهري (SEM) نلاحظ ان المتراكب النهائي (السيرميتي) المحضر اشبه الى ما يكون جزر موصلة (مادة الالمنيوم) مفصولة بمناطق عازلة (مادة الالومينا) وهذا ناتج بفعل التلاصق الفيزيائي. لوحظ ان زيادة نسبة الالمنيوم للمتراكبات المحضرة يلعب دورا مهما في الخواص الفيزيائية والكهربائية والتي تم مناقشتها بالتفصيل، وكذلك حسن من قيمة الصلادة للمتراكبات المحضرة، حيث ان التوزيع العشوائي لدقائق الالمنيوم ضمن مادة الالومينا، كون اقرب الى ما يكون الى شبكة داخلية معدنية زادت من متانة المتراكب المحضر من خلال ملء المسامات الموجودة غالبا بسبب مادة الالومينا الهشة. من خلال هذه الدراسة توصلنا الى ان المتراكب المحضر له نسبة مسامية عالية والتي يمكن توظيفها في صناعة فلترات الوقود. كما يمكن توظيف الخواص العزلية المحسنة التي توصلنا اليها في صناعة المتسعات السيرميتية (cermet capacitors )، كذلك من خواص مقاومة البلى التي توصلنا اليها، ممكن توظيفها في تصنيع ادوات القطع والبرد بعد اجراء التحسينات اللازمة. | A cermet (ceramic - metal) composite have been prepared from alumina ceramic (γ - Al2O3) as a matrix and from aluminum metal (Al) as reinforcement, prepared for different concentrations of aluminum (0 - 50)%, the reinforcing increment is (10%).The forming process was done by single action pressing, and the sintering process was done in vacuum atmosphere.The compaction behaviors of prepared cermet bodies were studied in solid state sintering, at sintering temperatures (400, 450, 550) °C, sintering times (2, 4, 6) hrs. and forming pressures (50, 100, 150) bar, the best physical properties were gained at (550 °C, 2hrs., 150bar).Liquid phase sintering process was studied as a function of Al percent in the composite at (800 °C, 2 hrs., 150 bar). According to the interesting physical properties we gained from liquid phase sintering process, these parameters were chosen to study the effect of the forming pressure ((50, 100, 150) bar) on the physical properties of the prepared cermet bodies. The behavior at the region that have aluminum concentration (40 - 50)% showed the best physical properties, according to this, most of the measurements were studied on the concentration of 50% of aluminum material. The basic concept of this study is the physical adhesion between the material particles of the prepared cermet bodies, which was obvious from the XRD tests. Also from the SEM micrograph we have notice the final structure of the prepared cermet, which is more like conducting islands (aluminum) separated by isolated areas (alumina), which is a sequent of the physical adhesion action.Increasing of aluminum content in the composite materials prepared may play an important role in physical and electrical properties has been discussed in detail, also enhanced the hardness of the samples, where the random distribution of aluminum particles through the alumina material, makes more like internal web of metal, that helps to increase toughness of samples by filling the porosities existed because of the brittle alumina.From this study we noticed, we have relative high porosity that could be employed in fuel filters. Also we have fine dielectric properties that could inter the application of cermet capacitors. Also, we have reasonable wear result that can be employed in grinding and cutting tools after improvements have been done.

قياس النشاط الاشعاعي في نماذج بايولوجية باستخدام كاشف الاثر النووي CR - 39 Radioactivity Measurement in Biological Samples Using Nuclear Track Detectors CR - 39

اسم المؤلف: هدية حاتم نصيف
اسم المشرف: نضالة حسن كاظم العاني
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تضمنت هذه الدراسـه قياس تراكيز اليورانيوم في نماذج بايولوجيه مختارة من جسم الانسان ودمه , باستخدام تقنية التنشيط النيوتروني (النيوترونات الحراريه) المنبعثه من المصدر النيوتروني (241Am - 9Be) بسيل نيوتروني مقداره ((1.8 x1011 n/cm2, وتقنية عد اثار شظايا الانشطار النووي باستخدام كاشف الاثر النووي للحاله الصلبه CR - 39) ). تم جمع خمسون نموذج بايولوجي من محافظتي (بغداد وميسان ) اذ شملت هذه النماذج (نماذج الدم الغير مسرطن ونماذج الدم المسرطن من نوع سرطان الدم النخاعي المزمن ), وشملت الانسجه البشرية جهازين من جسم الانسان هما الجهاز الهضمي (المعده,الامعاء الدقيقه, الكبد, القالون,المراره, البنكرياس والاثنى عشر). والجهاز البولي (الكلى ,الحالب والمثانه) وتضمنت هذه الانسجه حالتين مرضيتين هما الاورام الحميده والخبيثه.شععت النماذج التي تم الحصول عليها بعد تحضيرها لمدة (7) ايام بالنيوترونات الحراريه المنبعثه من المصدر النيوتروني ذو الفعاليه (12 Ci) وبفيض نيتروني (5x105n.cm - 2.s - 1) وذلك لاجل شطر اليورانيوم الموجود في النماذج وتسجيل اثار شظايا الانشطار على الكاشف.درست ازمنه مختلفه لقشط هذه الكواشف لاجل الوصول الى الزمن الامثل للقشط باستخدام الحمام المائي حيث تم اختيار المحلول الكيميائي القاشط NaOH)) بعياريه6.25N)) ودرجة حراره (70 Co) وتبين ان الزمن 70 min)) افضل زمن قشط للكواشف التابعه لنماذج الدم والزمن (90min) افضل زمن قشط للكواشف التابعه لنماذج الانسجه البشريه .بينت هذه الدراسة ان اعلى قيمة تركيزلليورانيوم وجدت في نماذج الدم غيرمسرطنه (ppm 0.146) واقل قيمه (ppm 0.078) وبمعدل (0.107ppm) وفي نماذج الدم المصابه اعلى قيمه كانت (0.121 ppm) واقل قيمه تركيز (0.045 ppm) وبمعدل (0.085 ppm) اما في نماذج الانسجة البشريه اعلى قيمة تركيز لليورانيوم في الجهاز الهضمي بلغ (ppm 0.068) واقل قيمه (0.022 ppm) وبمعدل تركيز (0.044ppm ) وفي الجهاز البولي اعلى قيمه كانت (ppm 0.06) واقل قيمه كانت (ppm 0.023) وبمعدل تركيز(0.047 ppm) | This study involvement the measurement of uranium concentrations in biological samples selected from Human body and its blod using neutron activation technique (thermal neutrons) emitted from the neutron source (241Am - 9Be) with neutron flounce (1.8 x1011 n / cm2), using technique of the nuclear fission fragments in solid state Nuclear track detector (CR - 39) Fifty biological samples were collected from two governorates (Baghdad and Maysan) , included blood samples ( Normal and Leukemic type CML) and tissues samples of digestive system (Liver, Small intestine, Stomach, Gallbladder, Colon, Pancreas and Duodenum) and urinary system(Bladder, Kidney and Ureter) were this included two types of disease (Benign tumors and malignant tumors ) All samples are irradiation After preparation for (7) days to thermal neutrons emitted from the neutron source with activity (12Ci) and neutrons flux(5x105n.cm - 2.s - 1) fission fragments in the samples and recorded tracks on detector.Studied different etching times of these detectors and to reach optimized time by using the water bath for etching where Choose chemical solution (NaOH) with (6.25N) and a temperature (70oC) , and show that the time (70 min) the best etching time of the detectors affiliated to the blood samples and time (90min) the best etching time to detectors affiliated to the human tissues samples.This study showed that the highest value of the concentration of uranium in Normal blood samples (0.146ppm) and the lowest value (0.078ppm) with average (0.107ppm) and in Leukemia blood samples the highest value (0.121 ppm) and the lowest value (0.045 ppm) with average (0.085 ppm), but in the tissue samples the highest value of the concentration of uranium in the digestive system(0.068 ppm) and the lowest value(0.022 ppm) with average (0.044ppm) and in the urinary system the highest value( 0.06 ppm) and the lowest value (0.023 ppm) with average (0.047 ppm).

قياس تراكيز اليورانيوم والرادون في تربة بعض مناطق جنوب شرق بغداد باستخدام كاشف CR - 39 Measurment of Uranium and Radon Concentrations in Soil of Some Regions in South East of Baghdad Using Nuclear Track Detector(CR - 39

اسم المؤلف: حلا محمد حمزة
اسم المشرف: نضالة حسن كاظم العاني
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: اجريت هذه الدراسة لتحديد تراكيز اليورانيوم وغاز الرادون في تربة بعض مناطق جنوب شرق بغداد (التويثة وعشتار والوردية وفلكة المدائن وجسر ديالى والرياض وسلمان باك ) .استعملت (35) عينة ترابية اخذت من (7) مناطق وبواقع خمسة اعماق لكل منطقة (سطح التربة,10cm, 20cm,30cm,40cm) للتعرف على مدى تلوث تلك المناطق باليورانيوم جراء العبث بالمصادر المشعة التابعة لمنظمة الطاقة الذرية بعد احداث الحرب على العراق عام ((2003 .تضمن الجزء الاول ايجاد تراكيز اليورانيوم في التربة باستخدام تقنية عد اثار شظايا الانشطار في كاشف الاثر النووي (CR - 39) الناتجة من قصف نوى اليورانيوم بالنيوترونات الحرارية من المصدر النيوتروني (Am241 - Be ) بفيض نيوتروني بلغ (5x103n.cm - 2.s - 1), اما الجزء الثاني فقد تضمن ايجاد تراكيز غاز الرادون في التربة باستخدام تقنية عد اثار جسيمات الفا المنبعثة من غاز الرادون في كاشف الاثر النووي (CR - 39). حددت تراكيز اليورانيوم وغاز الرادون بطريقة المقارنة مع النماذج القياسية ومن خلال النتائج المستحصلة نجد ان تراكيز اليورانيوم في عينات الترب كانت كالاتي : التويثة ppm (0.881±0.086),الوردية ppm(0.850±0.077) ,فلكة المدائن ppm(0.762±0.085) ,جسرديالى ppm(0.604±0.037),عشتار ppm(0.557±0.103) , الرياض ppm(0.465±0.171) ,سلمان باكppm (0.441±0.036) وقد بلغ معدل تركيز اليورانيوم لجميع المناطق ppm(0.651±0.180) .اما معدل تركيز غاز الرادون في عينات الترب لمنطقة الدراسة كانت كالاتي : التويثة Bq/m3(84.565±18.889),الورديةBq/m3(78.648±16.363),جسرديالى72.238±17.227) Bq/m3),عشتار Bq/m3 ((68.268±16.306, فلكة المدائن Bq/m3 (63.934±12.685), الرياض Bq/m3(59.097±10.777),سلمان باك Bq/m3(56.113±11.931) وبلغ معدل تركيز الرادون لجميع المناطق Bq/m3 ((68.980±10.297 اجري في هذه الدراسة ايضا تحديد معدلات الانبعاث السطحي والكتلي لغاز الرادون وقد اظهرت النتائج الحالية ان المعدلات العامة للانبعاث السطحي والكتلي لجميع مناطق الدراسة Bq/m2.hr(0.072±0.011) Bq/kg.hr(0.011±0.001) على التوالي . يلاحظ من خلال النتائج التي تم الحصول عليها ان تراكيز اليورانيوم والرادون في منطقة التويثة اعلى من بقية المناطق . | This study was done for measuring the concentrationsof (Uranium and Radon gas) in soil samples taken from South - East Baghdad(AL - Twitha, AL - Wardia, Madain Square, Jeser Diala , Ishtar , Hiay AL - Ryaid and Salman pak) .(35) soil samples are taken from (7) locations with five depths ranged from (soil surface ,10cm,20cm,30cm,40cm) to determine the level of concentration of these areas with Uranium .This contamination was due to the mis handeled of the radioactive sources of the Atomic Energy organization after the war Iraq in (2003).The first part consists the determination of Uranium concentration in soil samples using fission tracks registration in (CR - 39) detector obtained by the bombardment of (U) with thermal neutrons from (241AM - Be) neutron source has flux of 5x103n.cm - 2.s - 1 The second part concerns with the determination of Radon concentration in soil by using alpha - emitters registration wich emit from Radon gas in (CR - 39) detecor .The concentration values were calculated by comparison with standard Sample. The results showed that the concentrations of Uranium in study regions from South - East Baghdad were as the following : AL - Twitha (0.881)ppm , AL - Wardia (0.850)ppm , Madain Square (0.762) ppm ,Jeser Diala(0.604) ppm, Ishtar (0.557) ppm , Hiay AL - Ryaid (0.465) ppm ,Salman pak(0.441) ppm, the average of Uranium concentration in study regions(0.651±0.180) ppm . The Radon gas concentrations in study regions from South - East Baghdad were as the following : AL - Twitha (84.565) Bq/m3 ,AL - Wardia (78.648) Bq/m3 , Jeser Diala (72.238) Bq/m3, Ishar (68.268) Bq/m3 , Madain Square (63.934) Bq/m3,HiayAL - Ryaid(59.097)Bq/m3,Salman - pak (56.113)Bq/m3 The average Radon gas concentration (68.980±10.297)Bq/m3 .The results of the current study showed that the surface exhalation and mass exhalation rates of Radon gas in study regions(0.072±0.011) Bq/m2.hr (0.011±0.001)Bq/kg.hr respectively. This work shows the Uranium and Radon concentration in AL - Twitha is higher than the other regions

تاثير استبدال Sr على بعض الخواص الفيزيائية للمركب Ba2 - xSrxCa2Cu3O7+? Effect of Sr Substitution on some of Physical Properties of (Ba2 - xSrxCa2Cu3O7+?) Compound.

اسم المؤلف: حسين عبد الوهاب توفيق
اسم المشرف: سوسن عبد الحسين مهدي
الموضوع العام: علوم الفيزياء
السنة: 2017
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: لقد تم في هذه الدراسة تحضير المركب الفائق التوصيل Ba2 - x SrxCa2Cu3O7+δ ذا درجة حرارة حرجة عالية ولقيم x=0.0, 0.1, 0.2, 0.3, 0.5, 0.6 وباستخدام طريقة تفاعل الحالة الصلبة لغرض دراسة التغيرات الحاصلة في التركيب البلوري ودرجة حرارة التحول والخواص الفيزيائية والخواص العزلية.حيث تم فحص التركيب البلوري باستخدام تقنية حيود الاشعة السينية (XRD) واوضحت نتائج تحليل حيود الاشعة السينية ان جميع العينات للمركبات المحضرة لها تركيب معيني متعامد المحاورويمتلك اطوارتركيبية رئيسية عالية ومنخفضة مع تغير ثوابت الشبيكة ونسبة c/a والكثافة الكتلية والنسب الطورية نتيجة لزيادة تركيز Sr . اما قياسات السطح فتمت باستخدام المجهر الالكتروني حيث اظهرت صور المجهر الالكتروني الماسح ان العينات لها ترتيب طبقي متجانس ثم ان زيادة تركيز Sr ادى الى تغير الاحجام الحبيبية .واشارت النتائج الى ان هناك زيادة في محتوى الاوكسجين نتيجة زيادة نسبة Sr المضافة للمركب من خلال الزيادة في محور c والذي بدوره يؤثر على مقدار Tc للمركب .اما المقاومة الكهربائية فتمت دراستها باستخدام تقنية الاقطاب الاربعة وتم ايجاد درجة الحرارة الحرجة Tc للمركبات الفائقة التوصيل من خلال منحنيات اعتماد المقاومية الكهربائية على درجة الحرارة وقد تبين ان اعلى نسبة درجة حرارة حرجة للمركب الفائق التوصيل Ba2 - xSrxCa2Cu3O7+δ Tcoff=140k وباستخدام مقياس ال LCR فقد تم قياس ثابت العزل الكهربائي كدالة للتردد ضمن المدى من 50Hz الى 1MHz في درجة حرارة الغرفة. وقد وجد ان زيادة تركيز Sr يؤدي الى تغير في ثابت العزل الكهربائي .اما بالنسبة للخصائص الفيزيائية فاوضحت النتائج ان زيادة نسبة Sr ادت الى زيادة في المسامية يقابلها نقصان في التقلص الحجمي والكثافة.

ثابت العزل الكهربائي الفعال للسليكون العشوائي النقطي الكمي Effective Dielectric Constant of Amorphous Silicon Quantum Dots

اسم المؤلف: حسين خضير مجبل
اسم المشرف: موفق كاظم عبد الرضا
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تركز هذا العمل على دراسة الحسابات النظرية لثابت العزل الكهربائي للسليكون العشوائي ذو النقاط الكمية ولحجوم تتراوح من (1,8 - 4,8) نانوميتر. الحسابات النظرية اظهرت بان قيم ثابت العزل الكهربائي للنقاط الكمية من السليكون العشوائي قد انخفضت. اعتماد ثابت العزل الكهربائي على التردد الساقط تحقق في هذه الدراسة. التصغير لشبه الموصل الصلب وصولا الى المقياس النانوي يجعل التاثير الكمي اكثر اهمية. وكنتيجة لذلك فان فجوة الطاقة لشبه الموصل النانوي تتوسع, وتصبح هنالك ازاحة لمستويات اللب, وتعديل لعرض الحزمة كذلك ازدياد الانفصال بين المستويات الثانوية داخل الحزمة. الاخماد لثابت العزل الكهربائي ينشا من تعزيز الربط البلوري وارتباط الالكترون مع الفونون بسبب نقائص عدد الاحداثيات الذرية وارتفاع نسبة السطح الى الحجم مع انخفاض حجم الجسيم النانوي. الاخماد في قيمة ثابت العزل الكهربائي يقودنا الى الازاحة نحو الطاقات العالية في حافة الامتصاص الفوتوني وكذلك الانبعاث الفوتوني والتي نجد تطبيقاتها في النبائط المايكروالكترونية والفوتونية ذات المقاييس النانوية. وبواسطة هذه الحسابات فقد اعتمدنا فكرة التقييد الكمي, حيث ان فجوة الطاقة لشبه الموصل تتطابق مع حجم النقاط الكمية من السليكون العشوائي. التركيب للجسيم النانوي قسم الى ثلاث قشرات (طبقات) والتي هي طبقة السطح وطبقة السطح الثانوي وطبقة اللب, حيث ان طول الاصرة وطاقة الاصرة وعدد الاحداثيات تختلف باختلاف القشرات. الاصرة تنكمش وطاقتها تزداد في طبقة السطح اما في طبقة السطح الثانوي فان الاصرة تنكمش قليلا ولكن طاقتها لاتتغير بينما في طبقة اللب فان كلا من طول الاصرة وطاقتها هي نفسها كما لو كان الحجم غير نانوي, بالاضافة الى ذلك في هذا الانموذج نجد ان انكماش طول الاصرة وزيادة طاقتها يزداد مع زيادة النقص في عدد الاحداثيات الذرية. استخدم لحسابات هذه الدراسة الحقيبة البرامجية Mathcad Professional 2015. | In this work, theoretical calculations of amorphous silicon quantum dots of (1.8~4.8 nm ) have been studied. The presented calculations shows that the dielectric constant of amorphous silicon quantum dots are suppressed. The frequency dependence of the dielectric constant was investigated. When the solid is miniaturized, quantum effects become, significantly important. As a results, the bandgap of a nanosemiconductor is extensions, the core levels will be shifted, the revision to width for band, and increasing split of sublevel inside the band. Dielectric extinction arises from the promotion of the binding energy to crystal and e - p reaction owing to coordination number diminution and the high in proportion of surface into volume with reduction of the size to the particles. A reduction for dielectric tendency to the brinks for photo - absorption and photoemission are a blueshifted, that might found applications in micro - electronic and photonic devices build on nanometric gauge. With the suggested calculations, effect of quantum confinement was a doped, the bandgap for nanosemiconductor could be governed with the size of amorphous silicon quantum dots. The structure of the nanoparticles was classified into three shells, i.e., the surface, the subsurface and the core, where the bond length, bond energy and coordination number are different. Bonds contract and the energy increase in the surface shell. In the subsurface shell, the only bond contract with a little but the energy unchanged, whereas the bond length and the bond energy are remain the same as the bulk in the core of particle. In this model the bonds contract and the energy increase with the increasing of atomic coordination number imperfection. All the calculations made in this work have been done using Mathcad Professional 2015.

تحضير تراكيب نانوية للزنك اوكسيد بطريقه السول - جيل

اسم المؤلف: تغريد سعدون محسن
اسم المشرف: رعد سعدون صبري محمد جاسم محمد حسن
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا البحث دراسة الخصائص التركيبية ,البصرية ,الكهربائية والتحسسية للاغشية (ZnO) النقية والمشوبة بالسيريوم (Ce) بالنسب % (3,5,10) المحضرة بطريقة السول - جيل, والتي رسبت بطريقه السبن كوتنك على قواعد زجاجية وملدنه عند درجات الحراره (350,500,550˚C) للاغشيه النقيه و(˚C550 ) للاغشيه المشوبه وبسمك (315.5)nm.بينت فحوصات نمط الحيود للاشعة السينية (XRD) لتشخيص طبيعة تبلور الاغشية المحضرة, حيث اظهرت النتائج ان جميع الاغشية المحضرة ذات تركيب متعدد التبلور من نوع سداسي hexagonal)), كما تبين من نتائج التشويب ان زيادة التشويب تؤدي الى النقصان في الحجم الحبيبي حيث تناقص الحجم الحبيبي من (37.1) الى (27.0) في حالة التشويب بنسبة ,10%, ومن خلال قياسات ماسح القوة الذرية AFM تبين ان خشونه السطح تزداد بزياده نسب التشويب من القيمه (1.14) الى القيمه 2.15)) عند النسبه 10 % ,ومن قياسات المجهرالالكتروني الماسح SEM تم التعرف على نوع التراكيب ففي الاغشيه النقيه ظهرت التراكيب ذات جسيمات نانويه كرويه الشكل موزعه بصوره منتظمة ومتجانسة ,بينما الاغشيه المشوبه كانت التراكيب الناتجه شبيه بالالياف وعلى شكل شبكه تجاعيد (متغصن ). وقد تم دراسة الخواص البصرية لاغشية اوكسيد الزنك النقية (ZnO) والمشوبة بالسيريوم (ZnO : Ce) على دراسة طيف النفاذيه (T᷊) لاغشية المحضرة حيث بينت النتائج ان اعلى نفاذيه تم الحصول عليها هي(95%) عند الاغشية النقيه بينما كانت النفاذيه للاغشية المشوبة %(65 - 40) ولمدى اطوال موجيه350 - 900) nm.) , وتبين ايضا ان الامتصاصية بشكل عام تزداد بزيادة نسب التشويب لتصل اعلى قيمة عند النسبه10% بزيادة نسبة التشويب. تم حساب فجوات الطاقة البصرية للاغشية النقيه والمشوبه وتبين ان فجوة الطاقة تزداد قليل بزيادة نسبة التشويب الى ان تصل الى اعلى قيمة عند نسبة التشويب (10%). وكانت فجوة الطاقة ( (Eg تتراوح من (3.219 eV) الى (3.232eV) بزيادة نسب التشويب. اظهرت القياسات الكهربائية ان التوصيلية الكهربائية المستمرة تزداد بزيادة نسبة التشويب ثم تقل عند النسبه 10 % مع زيادة نسبة التشويب . وبينت القياسات ان الاغشية كافة تمتلك طاقتين للتنشيط (Ea1) و(Ea2) تقل قيمتهما بزيادة نسبة التشويب. كما بينت خصائص(photoconductivity) ان الاغشيه تمتلك ربحيه مقدارها (2.357) للاغشيه النقيه و(1,1.666,1)للاغشيه المشوبه عند النسب (3,5,10 )%على التوالي . اما خصائص التحسسية لجميع الاغشية المحضره كانت تقاس بعد تعريضها الى ( (100,150,200 ppm) من ال( NH₃و( NO₂ عند درجه حراره الغرفه . النتائج العملية بينت ان اغشية اوكسيد الزنك المشوبة بالسيريوم والمرسبة على قواعد زجاجية تحسن التحسسية لتلك الاغشية للغاز ( NH₃و ( NO₂ كما تبين ان افضل نتيجة سجلت كانت للاغشية المشوبة بنسبة 10 % حيث كانت (17%) للغاز NO₂ و(16.66%)للغاز NH₃عند 300 درجه مئويه في حين كانت افضل نتيجه للاغشيه المشوبه بنسبه (%3 و%5) حيث كانت (12.6 %) للغازNO₂ و(10.31%) للغاز ,NH₃ 14%)) للغاز NO₂ و(13.28 %) للغاز NH₃ على التوالي عند 200 درجه مئويه . بالاضافة الى ذلك تبين ان التحسسية لها علاقة نسبية لدرجات الحرارة وكمية الغاز. | In the present work, structural, optical, electrical and sensing properties have been studied for undoped and Ce doped zinc oxide (ZnO) thin films with different cerium doping concentrations (3 ,5 and 10) % prepared by a Sol - gel method with spin coating , deposited on glass substrate at annealing temperature (350,500 and 550 )˚C for the pure thin film , 550 ˚C for doped thin film with (350±10) nm thickness, The X - ray diffraction technique has showed that all prepared films are polycrystalline structure type of hexagonal wurtzite, The doping resulted in decreasing grain size deteriorates the crystalline of the films from (37.1nm) of pure ZnO to (27nm) of ZnO : Ce at (10 %) doped. Surface analysis by AFM have been, the roughness increased with increasing the cerium concentration in the films from (1.14) to (2.15) at 10 % , From FE - SEM have been identified the structures in the thin film pure, spherical nanoparticles distributed a regular basis and homogeneous, while doped thin film were shapes like fiber and a wrinkle network. The measurements of optical properties transmittance of undoped and Ce doped ZnO films showed higher transmittance was (95%) for undoped ZnO films while (65 - 40% ) for doped Ce films within wavelength range (350 - 900nm). In addition, the results have showed the absorbance increased with increased doping to reach maximum value at 10% concentration. The energy gap of ZnO was calculated for undoped and doped films .It is noticed that the energy gap increases slowly with the increased of doping until it reaches the highest value at 10% doping concentration , and the energy gap ranging from (3.219) to (3.232) with increased doping concentration.The results of electrical properties have showed that direct current (D.C) conductivity increases then decreases by increasing doping to reach maximum value at 10% doping concentration. The results have showed that the films have two activation energy Ea₁ and Ea₂. From (photoconductivity) characteristics it has found that the gain factor (2.357) for pure ZnO and (1, 1.666, 1) for ZnO : Ce at (3, 5 and 10) % Respectively.The sensing properties for all undoped and Ce doped films were measured after films surface was exposed to (100,150 and 200) ppm for NH₃, NO₂ gas at room temperature. The experimental results of Ce doping of zinc oxide thin films with different cerium doping concentrations (3,5 and 10) % which deposited on glass substrate ,sensitivity of thin film sensor elements was investigated in this work. Therefore that the sensitivity of all the samples increases with the increasing in the operating temperature, reaching a maximum value corresponding to an optimum operating temperature which is 300°C for sample (10 %) and 200 °C for samples (3 % ,5 %). In addition ,the sensitivity is directly proportional with the operation temperature for limited range. In general , the sensitivity increases by increasing the concentration of NH₃, NO₂ with increasing temperature degree.

دراسة نظرية لمستويات طاقة النظائر ( - 2^6)[He] - 4 , ( - 9^18) F - 9 , ( - 15^30) P - 15 بالاعتماد على usda ,usdb ,usd باستخدام حسابات انموذج القشرة النووي Theoretical study of energy levels for (_2^6)?He?_4 , (_9^18)F_9 and (_15^30)P_15 Isotopes depending on USDA,USDB and USD using shell model calculation

اسم المؤلف: ايوب طالب عبد داغر
اسم المشرف: احمد موسى اشويخ
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: باستعمال حسابات انموذج القشرة النووي لتقيم مستويات الطاقة . مصفوفة العناصر النووية للتفاعل المؤثر لنيوكليونين اشتقت لجهود USD,USDB,USDA لوصف التفاعل للنيوكليونات وفقا لفضاء انموذج التشكيل للنوى ولحساب طاقات الربط والتهيج النووي . ووفقا لنظرية الاضطراب حسبت طاقة المستويات على افتراض وجود نيوكليونين بروتون ونيوترون خارج القلب المغلق وصفت وفقا لجهود USD,USDB,USDA العالمية . الحسابات اتمت باستعمال طاقة الجسيمة المفردة لتفاعل النيوكليونات خارج القلب المغلق ولثلاث انظمة , طاقة المستويات حسبت اعتمادا على مبدا الاختيار للزخم الزاوي والبرم النظائري T=0,T=1 لدوال الموجة غير المتناظرة للنيوكليونات . نتائج الحسابات اتمت باستعمال حزمة الماتلاب لحساب مستويات الطاقة مع قيمة عملية ونظرية لطاقة الجسيمة المفردة ونتائج الحسابات قورنت مع القيم العملية لمستويات الطاقة ولوحظ توافق جيد مع القيم العملية | The nuclear structure for low lying energy states of isotopes (_2^6)He_4 , (_9^18)F_9 , and (_15^30)P_15 nuclei have been investigated and studied using shell model depending on the evaluation of the energy levels . Nuclear matrix elements for the effective interaction of two - nucleons have been derived for the USD,USDA and USDB potential to describe the interaction of the nucleons at configuration model space for nuclei to evaluate the binding and excitation energy. According to the perturbation theory , evaluation energy levels with assume two nucleons one proton and one neutron out the closed inert core. The interaction of the nucleons out the closed core describe by USD,USDA and USDB universal potential .the calculations have been performed using single particales energy for nucleons interactions out the closed core in three system.The energy levels are computed depending on the selection rule of angular momentum and the isospin T=1and T=0 for antisymmetric wave functions for nucleons. Their results has been employed using Matlab software to evaluate the energy levels with experimental and theoretical single particle energies. The results data are compared with experimental energy levels which show good agreement

تصنيف وتحليل الصور الماخوذة للكلى باستخدام خواص النسيج Classification and Analysis of Kidney Images Using Texture Properties

اسم المؤلف: ايناس حمادي حسن
اسم المشرف: علياء حسين علي
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: معالجة الصور
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يهدف البحث الى الكشف المبكر وتشخيص الاورام وحصى الكلى من الصور المقطعية CT من خلال استخدام تقنيات برمجيات الحاسوب معالجة الصور الرقمية النظام المستخدم هو برنامج Matlab R2011a. تم استخدام 22 نموذج لخمس حالات من صور الكلى تتضمن الحالات السليمة, الحصى, الاورام (السرطانية), التكيس, والتليف الكلوي. واظهرت النتائج المستحصلة من النماذج القدرة على الكشف بين مختلف الاورام التي تصيب الكلى للحالات المبينة اعلاه. عمليات التقطيع التي استخدمت منها خوارزمية Thresholding التي تم تطبيقها على الصور المقطعية CT للكشف عن الانسجة غير السليمة (الورم والحصى) وفرزها وتميزها عن الاجزاء السليمة. طريقة اخرى استخدمت للتقطيع هي عملية التجزئة بطريقة Watershed segmentation لفصل الورم والحصوة من الكلى. كذلك تم حساب الخصائص النسيجية من مصفوفةLaw's) (Co - occurance, Local Binary, mask الى جانب الخصائص الهندسية لغرض الحصول على افضل نتائج. ان عمليات التصنيف بطريقة Unsupervised هيK - mean clustering استخدم هذا التطبيق على صور ال CT للكشف وتصنيف نوع الورم في الكلى, k - mean والتي تعتبر طريقة لفصل كل صنف على حدة اعتمادا على خصائص النسيج والمسافة بين كل صنف , واللون ان هذه الطريقة المستخدمة هي افضل من Watershed segmentation لانها فصلت وعزلت الاجزاء السليمة في اصناف وكذلك منطقة الورم باصناف لكل واحدة على حدة بصورة واضحة. ان حساب الخصائص الاحصائية للورم والحصوة التي يتم فصلها بواسطة mean clustering K - وحساب الخصائص الهندسية, لتحديد مساحة ومحيط الورم, مهمة جدا لتحديد نوع الورم وكذلك حساب اللاانتظامية التي تعطي مؤشرا حول شكل الورم او الحصوة. ان هذه الطرق تساعد الاطباء للكشف وتمييز الورم عن الحصى ومن ثم تسهيل العلاج من خلال مساعدة الطبيب والاشعاعي للتعرف على الاجزاء المتضررة من الكلى وحماية الاجزاء السليمة قدر الامكان من التعرض للاشعاع. اظهرت النتائج ان افضل الطرق المستخدمة للتجزئة وتحليل النسيج هي K - mean مع مصفوفة Co - occurrence لان K - mean يفصل الاجزاء السليمة ومناطق الضغط حول الورم والحصوة عن النسيج السليم. | The thesis aims to early detection and diagnose kidney tumors and kidney stone from Computed Tomography Scanning CT scan images through the use of computer and software technologies digital image processing, the system implemented in MATLAB R2011a. 22 samples has been used to five cases of kidney images including healthy, stones, tumors (cancer), cystic, and renal fibrosis. The results obtained shows that, the system are able to detecting between different tumors of the kidney the cases mentioned above. The segmentation processes that have been used which is the thresholding algorithm which has been applied on CT images are used to detect unhealthy tissues (tumor and stone). It's important for detoctors to determine the area of the tumor and stone to avoid damaging the healthy tissue during the treatment. Another way to segmentation process is the watershed which has been implemented to segmented the tumor and stone from the kidney. Also the textural process which are the Law's mask, Local Binary and Co - occurance matrix features are calculated beside the geometrical features to produce the best result of feature extraction and tumor predication. The unsupervised classification process which is the K - Mean clustering is used. The application of K - mean on CT images is to detect and classifying the type of tumor in the kidney, The K - mean clustering is a method of separating each class depending on the texture properties and the distance from each class and color, this method is best than watershed, it separated the healthy classes and the tumor classes from each other clearly. The statistical features are calculated for tumor and stone which are seperated by the k - mean cluster analysis process, the geometrical features, which represented the area and permiter is calculated for tumor. it's very important to estimate the irregularity which gives indication about the tumor and stone shape. These methods will enable the doctors to detect the tumor and the stone, then easing tretment, as well, it helps the radiologests to identify the affected parts of the kidney in order to prodect the normal parts as much as possible from exposure to radiation. The result shows, different methods are used for segmentation and texture analysis. But the best one is the k - mean's with co - occurrence matrix since, the k - mean's seperated the healthy classes and the tumor classes. So, it regarded as to be the best way to classify the tumor.
1 ... 284 285 286 287 288 ... 658