Show: 25 50 75 100 Results

Search results: 25 out of 267

دراسة تاثير تركيز المذيبات القطبية على بعض الخواص الطيفية لليزر عامل النوعية السلبي نوع (DOTCI) == Study Effect of Concentration Polarity Solvents on Some Properties of Spectroscopy for Laser Passive Q - Switching Type (DOTCI

Author name: هادي والي صاحب الصكر
Supervisor name: محمد تقي حسين | عبد الله احمد رشيد
General topic: Physics
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: لقد تمت دراسة اطياف الامتصاص والفلورة لليزر عامل النوعية نوع (DOTCI) واسمه العلمي (3,3Diethyl oxa tri carbocyanine Iodide) في المذيبين القطبيين (الايثانول والميثانول) على حده, وتحت ظروف طبيعية عند (درجة حرارة الغرفة) وللتراكيز الثلاثة (2x10 - 5 , 1x10 - 5 , 1x10 - 6) مولاري. ان الشدة النسبية لطيفي الامتصاص والفلورة تزداد مع زيادة التركيز وهذا ينطبق مع قانون بير - لامبرت. تم دراسة تاثير المذيبات القطبية (الايثانول والميثانول) على معامل الامتصاص المولاري, وقد بينت النتائج ان تاثير زيادة القطبية يؤدي الى نقصان الشدة. ولقد ازيحت اطياف الامتصاص والفلورة الى الاطوال الموجية القصيرة .(Blue Shift) وتم حساب ازاحة ستوك (Stoke Shift) لصبغة (DOTCI) حيث كانت تساوي (0.000041 nm - 1) للايثانول و(0.000039 nm - 1) للميثانول. كانت كفاءة الكمية لـ (DOTCI) عند التركيز الاول (2x10 - 5) مولاري في الايثانول والميثانول 88%) و75%) وزمن العمر الاشعاعي (29 و79) نانوثانية وزمن عمر الفلورة (25.52 و59.25) نانوثانية على التوالي, وكانت كفاءة الكمية عند التركيزالثاني (1x10 - 5) مولاري في الايثانول والميثانول 81%) و71%) وزمن العمر الاشعاعي (21 و67) نانوثانية وزمن عمر الفلورة (17.01 و47.57) نانوثانية وعلى التوالي, وكانت كفاءة الكمية عند التركيز الثالث (1x10 - 6) مولاري في الايثانول والميثانول 76%) و69%) وزمن العمر الاشعاعي (14 و60) نانوثانية وزمن عمر الفلورة (10.64 و41.4) نانوثانية وعلى التوالي. دلت الدراسة لاطياف الامتصاص والفلورة لليزر عامل النوعية (DOTCI) بان علاقة الكفاءة الكمية تتناسب طرديا مع زيادة التركيز وعكسيا مع زيادة قطبية المذيب | The Absorption and Fluorescence spectra have been studied for laser passive Q - Switching (DOTCI) (3,3Diethyl oxa tri carbocyanine Iodide) in two different polarity solvent (Ethanol & Methanol) separately under normal circumstances at (room temperature) for three concentration (2x10 - 5 , 1x10 - 5 , 1x10 - 6) M. The intensities of the absorption and fluorescence spectra were increasing with increase concentration which is agreement with Beer - Lambert Law. The effect of polarity solvents (Ethanol & Methanol) on molar extinction coefficient were studied. The measurement showed that effect of increasing polarity cause a decreasing intensity of the Absorption and Fluorescence spectrum and shifted to short wavelengths (Blue Shift).The Stokes shift was calculated for (DOTCI) where equal to (0.000041 nm - 1) for Ethanol and (0.000039 nm - 1) for Methanol.The quantum efficiency of (DOTCI) at (2x10 - 5 M) in Ethanol and Methanol were (qFM = 88% & 75%). While the radiative life time were (tFM = 29 ns & 79 ns) and the fluorescence life time were (tF = 25.52 ns & 59.25 ns) respectively. And for second concentration (1x10 - 5 M) were (qFM = 81% & 71%) , (tFM = 21 ns & 67 ns) and (tF = 17.01 ns & 47.57 ns).And for third concentration (1x10 - 6 M) were (qFM = 76% & 69%) (tFM = 14 ns & 60 ns) and (tF = 10.64 ns & 41.4 ns)The quantum efficiency results appear to be increase with increasing concentration and decrease with increasing polarity

دراسة تاثير استبدال (Y2O3,Sb2O3,SrO) على الخصائص التركيبية والكهربائية للمركب فائق التوصيل HgBa2Ca2Cu3O8 == Study the effect of (Y2O3,Sb2O3,SrO) substatution on the structural and electrical properties of the HgBa2Ca2Cu3O8+? superconductor compound

Author name: نور قاسم فاضل
Supervisor name: كريم علي جاسم
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: تتضمن الدراسة تاثير الاضافات (SrO or Y2O3 or Sb2O3) على الخواص التركيبية والكهربائيه للمركب الفائق التوصيل . [Hg 1223] تم حضير النماذج الاتيه HgBa2 - xSbxCa2Cu3O8+δ) وHgBa2 - xYxCa2Cu3O8+δو (HgBa2 - xSrxCa2Cu3O8+δ ولقيم x=0, 0.1, 0.2, 0.3 بطريقه تفاعل الحاله الصلبة.وقد درس الخصائص التركب البلوري باستخدام حيود الاشعة السينية ( XRD ) واظهرتحليل حيود الاشعة السينية ان جميع العينات ذات تركيب (tetragonal) تحوي على اطوارتركيبه فائقه التوصيل منخفضة (1212و1201) وعالية (1223) , وان النسب الطوريه ) نسبه الطورالعالي 1223) تزداد عند الاستبدال. كذلك وجد بان قيمة الثابت الشبيكة (c) يقل عند استبدال (SrO or Y2O3 or Sb2O3) في موقع الباريوم.حيث ان قيمه ثابت الشبيكه c للمركب HgBa2 - x(Sr or Sb or Y)x Ca2Cu3O8+δ ل x=0 هي c=15.75 ,في حين عند استبدال Srتنخفض قيمه ثابت الشبيكه cالى c=15.3510 (x=0.1), 15.3811 (x=0.2), 15.4431 (x=0.3),كذلك تنخفض قيمه ثابت c عند استبدال Sbالى 15.3417 (x=0.1), 15.4274 (0.2), 15.4432 (x=0.3).عند استبدال Yتنخفض قيمه ثابت الشبيكه cالى15.353 (x=0.1), 15.397 (0.2), 15.473 (x=0.3). . لحساب درجه الحراره الحرجه تم دراسة المقاوميه الكهربائيه باستخدام تقنيه القطاب الاربعة, حيث وجد ان درجه الحرارة الحرجه تزاد عند استبدال SrO وY2O3 وSb2O في موقع الباريوم وان اعلى درجه حرارة حرجة تم الحصول عليها عند استبدال Srوهي 138 كلفن. في درجة حرارة الغرفة تم قياس ثابت العزل الكهربائي كداله للتردد في المدى (Hz50 - 1MHZ), قد وجد ان ثابت العزل الكهربائي للتردد HZ 50 هو 45.489، بينما عند استبدال (Sr)ينخفض ثابت العزل الكهربائي الى 45.1715 (x=0.1)، 24،2123 (0.2x=) ,16.82781313 (x=0.3)، وانخفض ايضا ثابت العزل الكهربائي عند استبدال (Sb) الى 12،708 (x=0.1)، 10.339 (0.2x=) ,10.816 (x=0.3) لكن عند استبدال (Y) ثابت العزل الكهربائي يزداد الى 63.3682 (x=0.1) الى 26،378 (x=0.3). | The present thesis includes effect of (SrO, Y2O3 and Sb2O3) substatution on the structural and electrical properties of the [ Hg - 1223] compounds. Which have prepared the superconducting compounds HgBa2Ca2Cu3O8+δ ,HgBa2 - xYxCa2Cu3O8+δ, HgBa2 - xSbxCa2Cu3O8+δ and HgBa2 - xSrxCa2Cu3O8+δ (x=0.1,0.2,0.3) by useing Solid state reaction method. The crystal structures for all the specimen have been determined by of X - ray diffraction. Shows the XRD that all specimen have tetragonal structures correspond to the high [ Hg - 1223] and low - phase[ Hg - 1201 and Hg - 1212], and there is a decrease in c - parameter value when substituted of (Sb2O3 or SrO or Y2O3) in Barium site, where that c - parameter value of HgBa2 - x(Sr or Sb)x Ca2Cu3O8+δ for x= 0 is c=15.75, while at substatution (Sr) decreased c - parameter value to c=15.3510 (x=0.1), 15.3811 (x=0.2), 15.4431 (x=0.3), also decreased c - parameter value at substatution (Sb) to 15.3417 (x=0.1) , 15.4274 (0.2) and 15.4432 (x=0.3), at substatution (Y) decreased c - parameter value to 15.353 (x=0.1) , 15.397 (0.2) and 15.473 (x=0.3). while the volume fraction of the high - Tc phase increased with the increase of (Sb2O3 or SrO or Y2O3) content. Electrical resistivity was used to find the critical temperature using the four - probe technique, found that transition temperature which it increased when substituted (Sb2O3 or SrO or Y2O3), and we get a highest critical temperature is 138k. The dielectric constant have been measured and is a function of applied frequencies ( range of 50 Hz to 1MHz) at room temperature HgBa2 - x(Sr or Sb)x Ca2Cu3O8+δ for x= 0. It was found that the dielectric constant of at the frequency 50Hz is 45.489 , while at addition(Sr) decreased dielectric constant are 45.1715 (x=0.1) , 24.2123(0.2) and 16.82781313 (x=0.3),also decreased dielectric constant at addition(Sb) to 12.708 (x=0.1) , 10.339(0.2) and 10.816 (x=0.3).but when addition(Y) dielectric constant increasing are 63.3682 (x=0.1) to 26.378 (x=0.3). It was found that dielectric loss factor (tan) of all specimens decreased with the increase of frequency.

تصنيع ودراسة الخصائص الفوتوفولتائة للوصلة TiO2 (1 - x) Bix/Si بواسطة الترسيب بالليزر النبضي == Synthesize and Characterization of TiO2(1 - x)Bix/Si Photovoltaic by Pulses Laser Deposition

Author name: ميسون ذياب راضي
Supervisor name: صباح نوري مزهر | غصون محمد حميد
General topic: Physics
Degree: Master
University: University of Baghdad
Language: English
University location: Baghdad
First pages:
Abstract: تم في هذا البحث استخدام طريقة الترسيب بالليزر النبضيPLD بواسطة ليزر Nd : YAG ذي الطول الموجي nm1064λ= وبمعدل تكرار Hz6 وفترة نبضة ns10 لترسيب اغشية رقيقة بنوعية عالية لثنائي اوكسيد التيتانيوم النقية والمشوبه بالبزموث وبنسب وزنية مختلفة (0, 3, 5, 7, 9) % تم الترسيب على قواعد زجاجيه ورقائق السليكون وذلك لدراسة تاثير التشويب على كل من الخصائص الفيزيائية لاغشية ثنائي اوكسيد التيتانيوم، وثم قياس خواص الكاشف TiO2 : Bi/ Si..بينت قياسات حيود الاشعه السينيه لاغشية ثنائي اوكسيد التيتانيوم النقية والمشوبة بنسب مختلفة (0, 3, 5, 7, 9) % بالبزموث بان هذه الاغشية تمتلك تركيب عشوائي للاغشية النقية تتحول الى متعدد التبلور عند التشويب والتلدين وذات تطابق جيد مع القمم القياسية لطوري Anatase وRutile وكان الاتجاه السائد للحبيبات هو باتجاه (110) Rutile مع زيادة التبلور بزيادة نسبة التشويب وخاصة لطور ال (Rutile)حتى نسبة 7% ومن ثم يتناقص عند نسبة التشويب 9% مع ظهور قمم صغيرة مطابقة لقمم البزموث . كذلك ازدياد درجة التبلور وخصوصا للطور (Rutile)عند زيادة درجة حرارة التلدين من درجة حرارة الغرفة الى 525 كلفن.تبين من دراسة سطح الاغشية بواسطة مجهر القوى الذريه ان الحجم الحبيبي يزداد بزيادة التشويب ثم يتناقص عند نسبة التشويب 9%. بينت دراسة اطياف النفاذية في مدى الطول الموجي ( nm1100 - 300) ان قيمة النفاذية لاغشية TiO2 النقية عند الطول الموجي 500nm تساوي 52.4 % وتناقصت عند التشويب بالبزموث , كذلك فقد وجد ان فجوة الطاقة البصريه لاغشية اوكيسد التيتانيوم النقية 3.7 الكترون فولت وقلت عند التشويب حيث تصل الى 2.2 الكترون فولت عند نسبة تشويب % 9.بينت دراسة الخصائص الكهربائية لاغشية ثنائي اوكسيد التيتانيوم النقية والمشوبة المتمثلة بتوصلية التيار المستمر في مدى درجة حرارة K(473 - 303) ,ان هذه الاغشية تمتلك طاقتا تنشيط وبزيادة نسب التشويب تقل قيمها وتزداد التوصيلية، ومن نتائج تاثير هول لتحديد نوع الحاملات يتضح بان كافة الاغشية المحضرة هي ذات حاملات من نوع السالب وبزيادة نسب التشويب والتلدين تزداد كثافة حاملات الشحنة وتتناقص التحركية. تزداد قيمة الاستجابية والكفاءة والكشفية النوعية لكاشف ال TiO2 : Bi/Siمع التلدين ومع زيادة نسبة التشويب بالبزموث من 0 - 7% ثم تقل عند نسبة 9% بينما تتصرف القدرة المكافئة للضوضاء عكس ذلك. تصل الاستجابية الى قمة عند 0.3 مايكرومتر ل TiO2النقية تتزحزح الى 0.6 عند زيادة نسبة البزموث الى 9% والى 0.4 عند التلدين بدرجة 523 كلفن كنتيجة لنقصان فجوة الطاقة | Pulse laser deposition is used in this research by Nd : YAG laser with λ=1064 nm average frequency, 6 Hz and pulse duration 10 nm) to deposit pure and content TiO2 thin films with Bismuth at different ratio (0, 3, 5, 7,and 9)wt. % on glass and Silicon wafer substrates to study the effect of content on the physical properties of TiO2 thin films and then study the TiO2 : Bi/ Si detector characteristics.X - ray diffraction pattern measurements for pure and contented titanium dioxide films with different content ratio of Bi (0, 3, 5, 7 and 9)% show that these films amorphous structure converted to polycrystalline structure with annealing and content and have a good identically with standard peaks for Anatase and Rutile phases. The preferred orientation is along (110) direction for Rutile. The crystallinity of the films increase with increasing content ratio to 7% Bi and specially for rutile phase then decrease at 9%. The crystallinety went up when annealing temperature increases from RT to 525K.From Atomic Force Spectroscope, a topography of prepared films show an increment in average diameter with content ratio then it started to decrease when it reach 9%.UV - visible spectra from 300 to 1100 nm shows that the pure TiO2 film has 52.4% transmittance at 500 nm wavelength. The transmittance decreases with increasing of content ratio with Bi. The optical energy gap for pure TiO2 film is about 3.7 eV and decrease with content until it reaches 2.2 eV at 9% Bi content.The results of electrical properties are represented by DC conductivity in temperature range (303 - 473) K for pure and contented TiO2 films show that these films have two activation energies and with increasing content ratio, these activation energies decrease and the conductivity decreases, as well Hall effect measurements show that all films have n - type charge carriers and its concentration increases and the mobility decreases with content and annealing.The responsivity, quantum efficiency and the specific detectivity for TiO2 : Bi/Si detector increase with annealing and with increase Bi content from 0 to 7% then decrease at 9% , while the NEP has inverse behavior. The responsivity reached peak at λ= 0.3 μm for pure TiO2 and this peak shift to 0.6 μm when Bi content increase to 9% and shifted to 0.4 μm when annealed at 523 K as a results of decreasing the energy gap

تاثيرات اشعة الليزر العلاجي واطئ القدرة على الخلايا الطبيعية والسرطانية من خلال تشعيع الغدة اللمفاوية للفئران

Author name: مصطفى صالح علي الموسوي
Supervisor name: تقي علي موسى الموسوي الواجدي | ناهي يوسف ياسين
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: ان تقنية التشعيع باستخدام الليزر واطئ القدرة Diode Laser ذي الاطوال الموجية المختلفة له القابلية على احداث تغييرات بايولوجية وذلك من خلال انتقال طاقة الفوتون الى النظام البايولوجي المستهدف، وبسبب الاهتمام بموضوع تاثيرات اشعة الليزر المستخدمة في العلاج الطبي فان تاثير ضوء الليزر ذي القدرة الواطئة على نشاط الخلايا المناعية تمت دراسته على الخلايا المناعية المميزة (macrophages and T cells) في نماذج حيوانية. وان جميع التجارب المتعلقة بالبحث قد انجزت في المركز العراقي لبحوث السرطان والوراثة الطبية التابع للجامعة المستنصرية.تم فحص 180 نموذج من اناث الفئران البيضاء بعمر شهرين وذات معدل وزن 25± 5 غم في هذا البحث، وطبقا لبروتوكول العلاج بالليزر تم تقسيم الفئران الى مجموعتين، المجموعة السليمة (90 (n= والمجموعة المصابة بسرطان الغدة اللبنية((AM3 (90 (n=. تم تشعيع الغدد اللمفاوية العنقية ل75 فارة من كل مجموعة باستخدام ليزر القدرة الواطئة ذي الاطوال الموجية (830,780,670,635,532) نانومتر. كل خمس عشرة فارة من كل مجموعة قد تم تشعيعها من احد تلك الليزرات بواسطة توجيه حزمة الليزر الى الغدد اللمفاوية لتلك الفئران مرتين في اليوم الواحد لمدة 20 دقيقة وللفترات 5، 10، 15، 20 ،25 يوم على التوالي، بينما لم يتم تشعيع مجموعة اخرى مكونة من 30فارة وذلك لاستخدامها لاغراض المقارنة مع المجاميع المشععة وللفترات الزمنية نفسها. في نهاية التجربة، تم قتل جميع الفئران بعد نهاية الفترات 5، 10، 15، 20 ،25 يوم على التوالي، لاجراء التشريح وازالة الغدد اللمفاوية بهدف اجراء الفحص النسيجي واستخدام طريقة الفحص الكيميائي النسيجي المناعي (IHC)، CD3) و(F4/80 لدراسة تاثيرات الليزر على الخلايا المناعية التي يمكن تحفيزها لتحسين وظيفة الغدة اللمفاوية بهدف زيادة استجابة الجهاز المناعي، وبعدها يتم فحص العينات تحت المجهر الضوئي.من خلال تحليل النتائج التي تم الحصول عليها في هذا البحث، وجد ان الاطوال الموجية المختلفة للليزرات القدرة الواطئة يحفز خلايا الجهاز المناعي. ان تشعيع الخلايا المناعية باستخدام ليزر واطئ القدرة كان مصحوبا بتثبيط معنوي ملحوظ في نمو الورم وكانت اغلب الملاحظات عند الاطوال الموحية 635,670 نانوميتر.الخلاصة________________________________________ان معدل زيادة نسبة T cell (في الفئران الطبيعية) في اليوم الخامس والعشرين من فترة التشعيع هي 30% فقط، بينما كان معدل الزيادة في نفس هذا النوع من الخلايا وبوجود الخلايا السرطانية 107%. وان معدل الزيادة في نسبة خلايا (macrophages) في الفئران الطبيعية في اليوم الخامس والعشرون من فترة التشعيع بالليزر ذو الطول الموجي 635 نانومتر233% والتي تقارب بنسبة كبيره لمعدل الزيادة 237% في نفس هذا النوع من الخلايا وبوجود الخلايا السرطانية .ان تاثير الليزر ذي الاطوال الموجية 635 و670 نانومتر لازال واضحا على حجم الورم للفئران المسرطنة. في اليوم الخامس من التشعيع فان الليزر ذا الطول الموجي 635نانومتر فقط قادر على ان يسبب تثبيط معنوي ملحوظ (p<0.05 ) في حجم الورم، بينما في ايام التشعيع 10، 15، 20 فقط الليزرات ذات الاطوال الموجية 635 و670نانومتر قادرة على ان تسبب تثبيط معنوي ملحوظ في حجم الورم للفئران المسرطنة المشععة. ان الليزر ذا الطول الموجي 635 نانومتر كان له التاثير الاعظم على تثبيط حجم الورم للفئران المسرطنة اذا ما تمت مقارنته مع بقية الاطوال الموجية للفئات العمرية المختلفة.نستنتج من هذه الدراسة ان تحفيز الغدة اللمفاوية يعتمد على نوع الليزر المستخدم، حيث ان هناك علاقة بين الطول الموجي لليزر المستخدم مع زيادة عدد الخلايا المناعية عندما تكون الجرعة الاشعاعية متساوية لجميع الاطوال الموجية | Low level diode laser of different wavelengths is an irradiation technique that has the ability to induce biological changes by transferring the photon energy to the targeted biological system, because of the large interest in the field biological effects of laser radiation used in laser therapy, the effect of extremely low - level laser light intensity on the immune cell activity has been studied in the animal model with well - characterized macrophages and T cells. All the experiments of this study were performed in the laboratories of the Iraqi center for cancer and medical genetics research (ICCMGR). A total number of 180 female white mice of two months age and mean weight of 25 ± 5 g were examined in this project. According to the laser treatment protocol the mice were divided into two groups, normal (n=90) and adenocarcenoma inoculation (n= 90). The cervical lymph nodes of only 75 mice of each group were irradiated by different wavelengths LLL (532, 635, 670, 780, and 830) nm. Each of the 15 mice were irradiated by one of these lasers by directing the laser beam to the mice lymph node for 20 mins for a period of 5,10,15,20 and 25 days. This was done twice daily. While the other 30 mice were not irradiated to use them for comparison study with the irradiated groups for the same mentioned periods of time. At the end of the experiment, the animals were killed. Each mouse was fixed on the back of anatomical slab. The specimen (lymph node) after removal were taken for histo - pathology exam and the immunohistochemistry (IHC) method (markers CD3 and F4/80) was used to study the effects of lasers on the macrophages and T lymphocyte cells which can be stimulated in order to enhance the lymph node function, and as a Abstract________________________________________result, enhance the immune system response. Then, the slides were examined microscopically. Through the analysis of the data obtained from this study, it was found that different wavelengths LLL stimulated the immune cells (T and Macrophages), the irradiation of these cells with LLL was associated with a remarkable and significant growth inhibition most noticeably at laser wavelengths of 635 and 670 nm. The average increase in the percentage of T cells (in healthy mice) at the 25th day of exposure to 635 nm laser light was only 30% while the average increase of such cells in the presence of cancer cells was 107%. In contrast, the average increase in the percentage of macrophages (in healthy mice) at the 25th day of exposure to 635 nm laser light was 233% which was very close to the average increase (237%) in the presence of cancer cells. The effect of the laser wavelengths of 635 and 670 nm was still obvious on the tumor volume of cancerous mice. At the fifth irradiation day, the only laser wavelength of 635nm was able to cause a noticeable significant (p<0.05) decrease of tumor volume of the irradiated cancerous mice. While at the exposure days 10, 15 and 20 the only two laser wavelengths of 635 and 670 nm were able to cause a noticeable significant decrease of the tumor volume of the irradiated cancerous mice. The laser wavelength of 635 nm has the maximum significant decrease of tumor volume of cancerous mice in comparison with irradiation of other laser wavelengths at different age groups. As a conclusion for this study, stimulation of lymph node depends on the kind of the used laser. There was a relationship between the used laser wavelength and the increment in the number of the T - cells and Macrophages when the laser dose was uniform for all wavelengths.

تصنيع كاشف من انابيب الكاربون النانوية لليزر الاشعة تحت الحمراء == Fabrication of Carbon Nanotubes Detector for IR Laser

Author name: مروة عبد الرحمن داود
Supervisor name: سمر يونس طه | وسن رشيد صالح
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: في هذه الدراسة تم تصنيع كاشف يعمل في منطقه الاشعة تحت الحمراء البعيدة وبدرجة حرارة الغرفة باستخدام اربع انواع من انابيب الكاربون النانوية متعددة الجدران. (MWCNTs, COOH - MWCNTs, short - MWCNTs and DWCNTs) .انابيب الكاربون النانويه رسبت بتقنيه (dip coating) و((drop casting لتحضير اغشية انابيب الكاربون النانوية متعدد الجدران على قاعده سليكون مسامي من نوع n و. p تم تبخير اقطاب الالمنيوم على اغشيه انابيب الكاربون النانوية لتصنيع كاشف يعمل في منطقه الاشعة تحت الحمراء البعيده. تم دراسه الخواص التركيبيه والطبوغرافية والبصريه وحسابات هول لهذه الاغشيه المصنعة . تم فحص الخواص التركيبه لغشاءMWCNTs باستخدام حيود الاشعه السينيه (XRD) واظهرت النتائج ان له تركيب متعدد االتبلور وشكله سداسي والغالب كان باتجاه (002). مجهر القوة الذري ((AFM تم فية التركيز على تشخيص خواص السليكون المسامي مع انابيب الكاربون النانوية متعددة الجدران. وجد ان الفلم له توزيع سطح متجانس مما يشير الى التوزيع الجيد لانابيب الكاربون النانوية فوق النتؤات النانوية للسليكون. تم تعين معدل الحجم الحبيبي وكانت بحدود 87.05 nm . المجهر الالكتروني الماسح (SEM)استخدم لدراسة طوبوغرافية اغشيه انابيب الكاربون النانوية متعددة الجدران ووجد ان هذه الاغشيه متجانسة ولاتوجد فيها اية تكتلات او شقوق .فجوة الطاقه البصرية في المنطقة تحت الحمراء تم ايجادها من فحص FTIR وكانت فجوة الطاقة0.12 eV. دراسة طيف رامان ولانابيب الكاربون النانوية متعددة الجدران, بينت ان الطيف يتحدد بثلاثة انواع من الحزم D وG وPRM .وجدن الخط (D) وجد انه يقع عند 1561.62 cm - 1 والتي تشير الى عدم الانتظام بسبب العيوب وتقوس لشبيكه انابيب الكاربون متعددة الجدران بينما الخط (G) يقع بحدود 1750 cm - 1 ويكون نتيجه اهتزازات في اواصر C - C الخط الثالث PRMكانت تقع عن2700 cm - 1, هذه الحزم ممكن استخدامها لتقدير اي عيوب في الكاربون. نسبه الشدة D/G تساوي 1.135 . مطياف الاشعه تحت الحمراء استخدم لدراسة طيف انابيب الكاربون النانوية وللبوليمر والصبغة وظهرت امتصاصية جيده لانابيب الكاربون النانوية عند الطول الموجي 10.6 µm والذي يقع ضمن منطقة تحت الحمراء البعيدة ممايجعلها اختيار جيد لتطبيقات الاشعة تحت الحمراء. اظهرت قياسات تاثير هول ان انابيب الكاربون متعدد الجدران المرسبة على قاعدة السليكون المسامي هي من نوع شبه الموصل الموجب p - type)) ولها توصلية عالية. خصائص التيار - فولتيه واستجابيه الكاشف المصنع قيست عند الظلام والاضاءة لهذه الاغشيه بواسطه التشعيع بليزر ثاني اوكسيد الكاربون بطول موجي 10.6µm وبقدرة 2.5 W و2.2 . استجابية وخصائص كاشف التوصيل الضوئي تم تحسينها عن طريق تغطية افلام انابيب الكاربون النانوية متعدد الجدران بطبقة سمكها0.1mm من البوليمرات polyanilin وpoly methyl acrylae وبالاضافة الى صبغة methylene blue هذه الانواع من البوليمرات المطعمة بالصبغه تعتبر كمعالجة سطحية لغشاء الكاشف والتي تزيد بشدة من الاستجابيه الضوئيه لكاشف اشعه تحت الحمراء البعيدة.خصائص الكاشف (الكشفيه , الربح ,الاستجابه , القدره المكافئه للضوضاء ) حسبت قبل وبعد عملية الطلاء بالبوليمر ووجد ان الربح يزداد بحدود 25 مره اكثر من النماذج غير المطعمة .بينما الكشفيه ازدادت من (cm.Hz^1/2)/W 107 الى 1011(cm.Hz^1/2)/W بعد طلائها بالبوليمر .النتائج اظهرت ان الاستجابيه تزداد اكثر من الاستجابيه لاغشيه الكاربون النانوية غيرالمطعمه وتصل الى 0.0177 A/W لنوع انابيب الكاربون متعدد الجدران من نوع شبه الموصل السالب المحضر بطريقه (drop by drop ) وبينما اعلى الكشفية النوعيه بعد اضافه البوليمرات المطعمه بالصبغه كانت 7.08*1011 (cm.Hz^1/2)/W في حالة انابيب الكاربون متعدد الجدران لنوع شبه موصل السالب محضر بطريقه (dip coating) .هذه القيم تعطي اثبات لتاثير البوليمر في تحسين خصائص كاشف التوصيل الضوئي الاشعة تحت الحمراء البعيدة تم التحقق من تاثير تغطية اوتطعيم افلام انابيب الكاربون النانوية بالبوليمر على زمن الاستجابة الكاشف ووجد ان زمن النهوض كان 1.42ms , زمن الاستجابية كان 2.14ms بينمزامن الهبوط كان 3.92ms . | In this study the infrared photoconductive detectors works at far infrared region and at room temperature were fabricated. The detector fabricated using four types of carbon nanotubes CNTs (MWCNTs, COOH - MWCNTs, short - MWCNTs and DWCNTs).The carbon nontubes suspension is deposited by dip coating and drop - casting techniques to prepare thin films of CNTs. These films are grown on porous silicon (PSi) substrates of n - type and p - type Si. The aluminum electrodes were evaporated on the CNTs film to fabricate the far IR detectors.The structural, morphological, optical properties and Hall measurements of the film were studied. The structure of the MWCNTs film is examined by X - ray diffraction (XRD) and found to be polycrystalline of hexagonal structure with strong orientation at (002). The AFM studies are focused on the characterization of the PSi - CNTs and found it had a good and uniform surface homegensity which gives a good indicator for formation of the MWCNTs over the nanospikes of Si. The average particle size was determined and found to be 87.05 nm. The scanning electron microscope (SEM) technique has been applied to study the morphology of the deposited MWCNTs film. The results shows that the film are homogeneous and does not have areas with clusters or cracks.The optical energy gap in the IR region was calculated from FTIR spectrum and found to be 0.12 eV. From Raman shift spectrum for the MWCNTs, it was found that the spectrum is dominated by three typical lines; D - band, and G - band, and RPM band. The D - line is located about 1561.62 cm - 1 which assigned to the disorder induced by defects and curvature in the nanotube lattice, while G - line is located about 1750 cm - 1 due to the in - plane vibration of the C - C bonds. The RPM band is located at 2700 cm - 1 . These bands can be used to evaluate the extent of any carbon - containing defects. The D/G intensity ratio was 1.135. FTIR spectrophotometer was used to study the infrared spectrum of CNTs, polymers and Methylene Blue dye, which appear that CNTs have good absorbance in the wavelength of 10.6 µm. This is mean that these materials are very good candidate for IR applications. Hall Effect measurements show that the carbon nanotubes deposited on porous silicon substrate has a p - type semiconductor behavior and high conductivity. The I - V characteristics and the photoresponsivity of the fabricated detector are measured at dark and under illumination for CNTs film by IR radiation from CO2 laser of 10.6µm wavelength and power of 2.2 and 2.5W. The photoresponse and figures of merit of the photoconductive detector is improved by coating (functionalized) the CNTs films with layer of 0.1 mm of the blend polyaniline, polymethylmeth acrylate and methylene blue dye. This type of polymer coating can be considered as a surface treatment of the detector film, which highly increases the photoresponse and specific detectivity of the fabricated CNTs IR detector. The figure of mertis (Rλ, G, NEP and D*) were calculated before and after functionalization process. It is found that is increased in about 25 time than that for uncoated samples, while the specific detectivity was increased from order of 10+7 (cm.Hz1/2)/W to 10+11 (cm.Hz1/2)/W after coated with polymer.These values give an improve for the effect of polymer on the enhancement of the performance of IR photoconductive detector. The effects of the coating CNTs film with polymer on the response time of the detector investigated and found that the rise time was 1.428 ms, response time 2.14 ms while the fall time was 3.92ms .

بناء دوائر مشغل ليزر شبه الموصل المرئي لقياس المسافة == Driver circuit construction using visible semiconductor laser for distance measurement

Author name: محمد فرحان راهي الدريساوي
Supervisor name: بان رشيد علي
General topic: Physics
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: In this research study and construction of electronic circuits the ability of the laser (laboratory) are mediated by the semiconductor laser in the visible spectral response of the photon detector. (0.35 - 1.35) μm and the estimated circuit composed of the following : A - The transmission unit. B - A unit of receipt. T - Service counter. W - Department of calibration of the counter. C - Department of Qallab the counter to generate the highfrequencies to calculate the time. H - and the cargo unit. G - Department of lasers operating space. D - The department of central processing. All of these services are designed and run program brokered Multisium 2007. And the distance measured this ability is mediated. (100m) and will be equipped with a battery system and reloading as well as the lowest sensitivity possible capacity for the reflected radiation (0.11×10 - 9W)

محاكاة الحل التحليلي لقدرة خرج ليزر ليف زجاج السليكا المطعم باليتاربيوم

Author name: كنار نبيل جليل
Supervisor name: مظهر شهاب احمد
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: The current study included treating a theory of general derivation equation coefficients output laser's power ( ) by using the analytical solution of the rate equations that included the transition factor ( ), in which the losses scattering be neglected for a laser system when the active material is an optical fiber, its core is silica glass and Yb3+ - doped.While its resonant cavity it resonator Fabry - Perot, and it is pumping through one end of the optical fiber, while the Continuous Wave (CW) laser emission from the other end.In this study, it has been selected pumping wavelength ( 920*10 - 9m) and lasing wavelength ( 1090*10 - 9m) for this middle effective as an example of a typical plan to pump quasi four levels to find a numerical solution of the equation of the output laser which have been derived by programmable coefficients of this equation matlab language (version 8.1) this happened, after the coefficient ( ) has been calculated for all these laser transitions of this middle effective when it has been pumped ( ) as mention above.The simulation results for this laser system have presented that since the optical fiber is Single Clad Fiber (SCF) and a design of (Lycom ) type, it has been found that the concentration of the type (CorActive) is the highest value for obtaining high efficiency.The laser output power ( ) has been drops linearly by the increasing of core optical fiber radius, while it increases linearly with the increasing of the length of optical fiber, the laser output mirror reflectivity, pumping power, it is the highest values when using the optical fiber Single Mode (SM).In case of the optical fiber is Double Clad Fiber (DCF) and the design of type Large Mode Area (LMA), the ( ) decreases with increasing radius of the core of the optical fiber, while increases with each of the length of optical fiber and pumping power.In addition to that it has been found that ( ) increases linearly with the increasing pumping power whether the inner clad fiber shape is a Rectangle or Square or Circular, and that, the value of laser output power and efficiency are higher in the case of a Rectangular shape.

تحضير SnO2 النانوي ودراسة تاثير التشويب على الخواص التركيبية والبصرية == Preparation SnO2 nanoparticles and Study the Effect of Doping on Structure and Optical Properties

Author name: كرار امين قدوري محمد
Supervisor name: طارق عبد الرضا علوان الظاهر
General topic: Physics
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: تم في هذا البحث تحضير مسحوق SnO2 النانوي النقي المحضر من املاح القصدير المتمثلة بملح SnCl4.5H2O بطريقة الصول - جل بثلاثة مذيبات مختلفة وهي الماء، والميثانول، والايثانول، وتم اجراء عملية التلدين عند درجة حرارة (400°C) .تم اختيار المذيب الايثانول لاعطائه اكبر كمية من المسحوق ومطابقته للملف ذي الرقم (JCPDS : 41 - 1445) لتحضير العينات المشوبة (بالنيكل والمغنيسيوم والكادميوم) كل على انفراد وبثلاثة تراكيز (5, 10 و%15) من كل عنصر ثم اجريت عملية تلدين لهذه العينات لدرجة (700°C).اظــهرت نتائج حـيود الشعاع السيني ان جــميـع العينات المحـضـرة تمتلك نظاما رباعيا متعددة التبلور وفحصت العينات للمدى الزاوي (°20 - °100)، وظهرت السطوح الاربعة الاعلى شدة وهي ((110, (101), (200), 211))، تم حساب الحجم الحبيبي بطريقة ديباي - شيرر وبطريقة وليامسون - هول، وبينت النتائج ان حجم الحبيبات يقل بزيادة نسبة التشويب، كما تم حساب العديد من المعلمات التركيبية كثوابت الشبيكة وفسحة السطوح، والكثافة، والمساحة السطحية النوعية، وعدد خلايا الوحدة، وكثافة الانخلاعات، والاجهادات المجهرية وعامل التشكيل وعامل طبيعة السطح. اوضحت نتائج فحوص (AFM) طبيعة السطح للعينات المحضرة، وقد تم حساب معدل الحجم الحبيبي، ومعدل الخشونة، وقيمة جذر مربع المعدل(RMS) وكانت مختلفة من حيث معدل خشونة السطح. حيث تقل الخشونة بزيادة نسبة التشويب، ويقل معدل قطر الحبيبات بزيادة نسبة التشويب التي اتفقت مع نتائج حيود الشعاع السيني وكانت تتراوح ما بين (127.71 - 69.64) nm، وقد اظهرت صور (SEM) ان اشكال الحبيبات النانوية للنماذج (P4,N3,M3,C3) كروية او شبه كروية متجمعة بهياة عناقيد وظهر البعض منها بشكل متكتل. اما بالنسبة لفحص (EDX) فقد اظهرت جميع العينات قمة عالية عند ~3.5) keV) للقصدير مع ظهور قمم صغيرة لعنصر الكلور والبوتاسيوم التي عدت كشوائب بنسب وزنية ضئيلة جدا نتيجة عملية التحضير للعينة النقية، اما العينات المشوبة فقد اظهرت قمم مادة التشويب بالاضافة الى القصدير الا ان الاوكسجين لم يظهر في فحص (EDX).ومن خلال تسجيل طيـف الامتصاص لمحلول SnO2 وضـمن مــدى الاطــوال الموجـية (300 - 900 nm)، اوضحت النتائج ان الامتصاصية تزداد بزيادة نسبة التشويب لجميع العينات، اما فـجـوة الـطاقة البصرية للانتقال الالكتروني المباشر الـمـسـمـوح باستعمال معادلة (Tauc) وباستخدام معادلة (Kubelka - Munk) فقد وجد انها تقل بزيادة نسبة التشويب. | In this research, pure SnO2 Nanopowders were prepared from tin salt (SnCl4.5H2O) by sol - gel method using three different solvents; water, methanol and ethanol. The preparered powders annealed at temperature (400°C). according to the result of prepared powder, the sample of ethanol as a solvent is taken into consideration due to the greater amount of the powder is produced and it’s in a good agreement with the File No. (JCPDS : 41 - 1445). The preparation of doped samples is performed using ethanol as a solvent with each one of the dopants (Nickel, Magnesium and Cadmium) with three percentages (5, 10 and 15)% of each element. Then nine prepared doped samples as well as the pure one were annealing at (700°C).XRD results show, all prepared samples have polycrystalline tetragonal crystal system. The scan of x - ray in the range of Bragg’s angle (20 - 100)° which revealed the four highest intensity peaks, (110),( 101),( 200) and ( 211)planes. From the diffraction pattern of each sample, the crystallite size is calculated by Debye - Sherrer and Williamson - Hall methods. Their results showed that grain size decreases with increasing ratio of doping concentration, also there has been many parameter likes; lattice constants, interplanar distance, specific surface area, number of unit cells, intensity, dislocations density and macrostrain which are calculated. AFM test revealed the morphology of the prepared samples. Their grain size, roughness and average root mean square value (RMS) are different for each sample. Surface roughness decreased with the increase of the dopant percentage. The average grain size was ranging between (69.64 - 127.71) nm and is decreased with the increase of dopant percentage and this show a good agreement with the XRD results. SEM for the sample (P4, N3, M3 and C3) revealed spherical or semi - spherical nanoparticles agglomerate in the form of a cluster. While EDX test shows a high peak at (~ 3.5)KeV of the Tin, with small peaks of chlorine and potassium which are considered as impurity and that is due to its small quantity which is resulted from the process of preparation of pure sample. In the doped samples, the peaks of dopant elements appeared in addition to that of tin, but the oxygen does not appear.UV spectra for all samples are performed by dissolving some amount of the powder in the double distilled water in the range (300 - 900) nm, their results show the absorbance increases with the proportion of dopant concentration of all samples. The optical energy gap for allowed direct transition are calculated by using Tauc and Kubelka - Munk equations, which decrease with the increase of dopant percentage.

دراسة الخصائص التركيبية والكهربائية والمغناطيسية للفرايت النانوي ذي التركيب المغزلي المحضر بطريقة السول (NixCu0.2Zn0.8 - xFe2O4) - جل ذات الا حتراق التلقائي == Studying Structural , Electrical and Magnetic Properties for Nano Spinel Ferrite of (NixCu0.2Zn0.8 - xFe2O4) Prepared by Sol - Gel Auto Combustion Method

Author name: عمار عيسى عباس نجم الربيعي
Supervisor name: احمد رفيق عبد المجيد
General topic: Physics
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: In this research , Nano spinel ferrite (NixCu0.2Zn0.8 - xFe2O4) was synthesized using sol - gel auto - combustion and flash combustion methods .Nineteen samples were prepared and their studies were divided into three parts. Study the effect of citric acid in preparation of Nano ferrite (Ni0.1Cu0.2Zn0.7Fe2O4) by changing the molar ratio of adding fuel to any sample and the five samples were prepared from (C series). The structural properties of samples were studied using x - ray diffraction technique (XRD) and scanning electron microscope (SEM) which showed that the obtained ferrite possesses spinel cubic phase for all used molar ratios , besides when the concentration of adding fuel was increased leads to decrease in grain size and theoretical density , increase in dislocation density and the surface area. Then the molar ratio (1 : 1 M) was chosen as the best adding ratio due to that the obtained ferrite at this ratio possesses best texture coefficient with small grain size and best internal strain by comparing with the other ratios.  Study the influence of substitute (Zn+2) ion by (Ni+2) ion on the structural , electrical and magnetic properties of Nano ferrite powder (NixCu0.2Zn0.8 - xFe2O4)(0.1≤X≤0.7) synthesized using sol - gel auto - combustion method , there are seven samples were prepared (A) series and tested by two types of structural test included analyzer x - ray diffraction and scanning electron microscope, the results exhibited forming the spinel phase for all samples in spite of the substitute of (Zn+2) ion by (Ni+2) ion, and the increase of (Zn+2) ions concentration leads to decrease in the grain size and increase in theoretical density. Then the ferrite powder was divided in two groups, the first was pressed into the pellet shape which was used in electrical tests and the second group was pressed into the rings shape which was used in magnetic tests. The two faces of the pellets in first group polished by silver paste material in case to obtain a ceramic capacitors that subjected to electrical tests which included the measurement of dielectric constant , dielectric loss coefficient, alternating electrical conductivity and direct electrical conductivity ,and the study of magnetic properties for the rings samples included measurement of hysteresis loop , selfinduction, initial permeability and the relative loss factor. The results of electrical tests exhibited decrease in dielectric constant with frequency increase at room temperature , and dielectric constant increases at certain ratios of adding (Zn+2) ions and decreases at other ratios. However , the dielectric loss coefficient its fall when increasing frequency until reaches its lowest value at the high frequencies values and so it is various when the concentrations of (Zn+2) ion were changed .and the measurement of alternating electrical conductivity displaying it increases with the increasein frequency and it values disparity with the change of (Zn+2)ion concentration , in other hand the direct electrical conductivity increase with substituting (Zn+2) ion concentration increases. The magnetic tests results exhibited that the ratio (X=0.3) with chemical formula (Ni0.3Cu0.2Zn0.5Fe2O4) possesses a significant magnetic properties when compared with other samples because it has the highest initial permeability with lowest relative loss factor and it has best hysteresis loop so that it realized conditions for using it as a cores in transducers and electrical motors. Study the influence of substituting (Zn+2)ion by (Ni+2) ion on the structural properties of Nano ferrite (NixCu0.2Zn0.8 - xFe2O4)(0.1≤ X≤ 0.7) synthesized using flash combustion method, there are seven samples were prepared (F) series tested by two types of structural tests included xray diffraction and scanning electron microscope tests , and the results exhibited form the spinel phase for all samples and no other phases were presented and observed that structural results were agreed with these obtained from sol - gel auto - combustion method.

دراسة تحليلية للحام بالليزر على الخواص الحرارية - الميكانيكية للبوليمرات باستخدام برنامج ANSYS == Analysis Study of Laser Welding on Thermal - Mechanical Properties of Polymers Using ANSYS Program

Author name: زينه يونس علي
Supervisor name: خالد هادي مهدي العبيدي | ندى فاضل توفيق
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: الخلاصةان الهدف من هذه الدراسة, هو التنبؤ بسلوك المواد من حيث الخصائص التركيبية ,الحرارية والميكانيكية اثناء عملية اللحام في 3 - D. ان دراسة الخصائص التركيبية للمادة قد تم باعتبارها دالة لدرجة حرارة الانتقال الزجاجي T_g, ودرجة حرارة الانصهار T_m, وتغير الطور بينما يتم دراسة الخصائص الحرارية وفقا لتوزيع درجات الحرارة, والتدرج الحراري, والفيض الحراري, واخيرا يتم دراسة الخواص الميكانيكية بواسطة الاجهاد والمطاوعة.لقد تم تبني طريقة FEM لمحاكاة عملية اللحام لقطعتين متشابهتين ومختلفتين من مادة البولي بروبلين والبولي ستيرين في ثلاثة ابعاد. ان تحليل الخصائص الحرارية والميكانيكية لبوليمر البولي بروبلين والبولي ستيرين قد تم بدلالة كل من نموذج الحالة المستقرة والنموذج المتنقل باستخدام برنامج ((ANSYS 11. حيث ربط نموذج الحالة المستقرة (اعتبرت انها الحمل الابتدائي) مع نموذج الحالة المتنقلة بافتراض وجود الحمل الحراري والميكانيكي سوية بنفس الوقت على اعتبار ثبوت سرعة اللحام عند20ملي/ثانية ودرجة الحرارة عند 298م, وكذلك تم اختبار تاثير قدرة الليزر باستخدام ثلاثة قيم 50) (150,100 واط, كذلك درست تاثير نصف قطر بقعة الليزر على خصائص البوليمرات المستخدمة.بينت النتائج العددية قابلية لحام كل من المادتين البولي بروبلين والبولي ستيرين بهذه الطريقة, حيث لوحظ تناقص التشوهات الحرارية والميكانيكية الناجمة عن اللحام, كما يشير الشكل الهندسي هذه الاجهادات الى جودة اللحام. وبينت الدراسة ان كل من الفيض الحراري والانحدار الحراري يكون عند اعظم قيمها في اتجاه y - axis وهو اتجاه تسليط الليزر, وكانت درجة الحرارة العظمى في لحام كل من PP - PPو PP - PS هي ((351.4kو (425.9k) على التوالي. اما الاجهادات الميكانيكية فقد كانت واطئة في كل من PP - PPو PP - PS بحدود (0.181*〖10〗^9MPa ) و(0.166*〖10〗^9MPa) والمطاوعة (0.171) و(0.142) لكل من PP - PP وPP - PS على التوالي. واخيرا، لوحظ صغر مساحة المنطقة المتاثرة حراريا اذ كانت بحدود (9.2 〖mm〗^2) بالنسبة ل PP - PP، في حين اظهر عمق الاختراق تحسن مقارنة مع الاساليب المستخدمة، حيث كانت قيمته بحدود (2.5mm), اما في نموذج المتنقل فقد لوحظ تضاعف المساحة المتاثرة وعمق اختراق قريب من نتائج النموذج المستقر. | The aims of this study is to estimate the material behavior properties in terms of its structure, thermal and mechanical properties during welding process in 3 - D. The structure is studied as a function of T_m , T_g and phase change. While the thermal is investigated according to thermal distribution, thermal gradient and thermal flux. Finally the mechanical is examined by stress and strain.Finite element method is adopted to simulate welding process of two similar and dissimilar pieces of polypropylene and polystyrene in 3 - D.The analytical of thermal and mechanical properties is done in terms of steady - state model and transient model using ANSYS 11 program, then coupling the steady - state with transient model by supposed existing thermal and mechanical loads together in same time. Laser power effect on welding is investigated by three powers (50,100,and 150watt) and by laser spot radius (1mm, and 2mm), the welding speed is supposed constant at (20mm/sec).Numerical results show that the ability of this method to joined polymers material PP and PS, where it is noticed that the thermal and mechanical deformations are reduced, also the geometry shape of welding zone is indicated to a good quality of welding.From this study, the thermal gradient and thermal flux are at their maximum values at y - axis, in which the laser direction, and T_max in PP - PP and PP - PS joints are (351.4k) and (425.9k) respectively. Mechanical stresses and strains had low values, about (0.181*〖10〗^9MPa) and (0.166*〖10〗^9 MPa) and strain are about (0.171) and (0.142) for PP - PP and PP - 1PS joint respectively.Finally, it is observed that narrow HAZ area (9.2〖mm〗^2) of PP - PP joint, while penetration depth shows improvement comparing with usual methods, it's value is (2.5mm). In transient model it observes that multiples of HAZ area, and D_p is near its value in steady - state model.

تحضير ودراسة الخواص الكهربائية والبصرية لاغشية NiO الرقيقة غير المشوبة والمشوبة بالنحاس لتطبيقات متحسس الغاز == Preparation and study the electrical and optical properties of undoped and Cu doped NiO thin films for gas sensor applications

Author name: رانيا رعد كاظم الكناني
Supervisor name: انوار حسين علي الفؤادي
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: في العمل الحالي، تم تحضير اغشية رقيقة جيدة باستخدام تقنية منخفضة التكلفة وهي الرش الكيميائي الحراري, تم قياس الخصائص التركيبة , البصرية والكهربائية, والتحسسية لاغشية اوكسيدالنيكل غير المشوبة والمشوبة بالنحاس عند النسب ((1%,3%,5%,7%المرسبة على قواعد زجاجية مسخنة ب درجة حرارة c o (10 ± 400) وبسمكnm ( 10± 250 ) ، من حيود الاشعة السينية وجد ان جميع الاغشية النقية والمشوبة لها تركيب مكعبي , وبصورة عامة هناك زاويتي حيود عند المدى الزاويo 30 - 60)) تعود للسطحين (111)و(200) . وجد ان الحجم الحبيبي يزداد مع زيادة نسب التشويب حتى نسبة 3% ثم تنخفض قيمته عند النسب 5%, 7% ,ومن خلال قياسات ماسح القوة الذرية AFM وقياسات المجهرالالكتروني الماسح SEM تم التعرف على تاثير التشويب على جميع خواص الاغشية, كما تبين من نتائج التشويب ان زيادة التشويب تؤدي الى االزيادة في الحجم الحبيبي عند النسب (1%و3%) ثم ينخفض عند النسب (5% و7%). اشتملت الرسالة دراسة الخواص البصرية لاغشية اوكسيد النيكل غير المشوبة والمشوبة بالنحاس , وتبين ان فجوة الطاقة تقل من3.8 - 2.8) ev ) بزيادة نسبة التشويب. وجد ان الاغشية لها معامل امتصاص عالي cm(α>10 ) الذي يؤدي الى زيادة احتمال حدوث الانتقالات المباشرة بين المستويات البلورية وبينت النتائج ان معامل الامتصاص يزداد مع زيادة نسب التشويب. وقد اظهرت نتائج الخواص الكهربائية (D.C) زيادة التوصيلية الكهربائية مع زيادة التشويب لتصل اعلى قيمة لها عند نسبة 7%. وقد وجد ان لجميع الاغشية طاقات تنشيط تقل مع زيادة نسبة التشويب. من قياس تاثير هول وجد ان تحركية حاملات الشحنة تقل وتركيز الحاملات تزداد مع زيادة نسب التشويب . اما خصائص التحسسية لجميع الاغشية المحضرة تم قياسها للابخرة (NH ,H O )عند تراكيز مختلفة ppm(100,200,300) عند درجة حرارة ,150° c واظهرت النتائج ان افضل تحسسية كانت عند نسبة تشويب 5% لبخار NH , وقد وجد ان هناك زيادة خطية للتحساسية مع زيادة تركيز البخار. وهذا بسبب زيادة كمية البخار الذي يتفاعل مع سطح الغشاء الرقيق. | In the present work, a good adherent and smooth films of undoped and copper doped NiO have been prepared by using low cost spray pyrolysis technique at different percentage of copper concentration ,structural, optical, electrical, and sensing properties have been studied at different concentrations of Cu (1% ,3%,5%,7% ) deposited on glass substrate at temperature (400±10) oc with (250±10)nm thickness . From the X - ray diffraction investigation, the crystalline structure of thin films was a polycrystalline with a cubic structure , generally the peaks of the NiO and NiO : Cu thin films were observed at diffraction angles at the range (37°and 43°). All NiO : Cu thin films display peaks of (111), (200) and Cu peaks do not appear even after adding a higher quantity of Cu into the NiO films, the angle position of peak (111) shifted toward lower value with doping in Cu at 1%,3% then start to increases at 5%,7% concentration,resulting in the increasing of lattice constant (a),interplaner spacing (d) and crystallite size (D),then decreases due to the degradation in the crystallinity of NiO doped with 5%,7% respectively,surface analysis by SEM and AFM have been used to understand the effect of the doping on morphology properties of the samples. The doping resulted in increasing grain at doping rates (1%,3%), then decreases at doing rates (5%,7%). The measurements of optical properties of undoped and copper doped NiO films decreased with increasing the doping rate.Also the results have showed that absorption cofficient increases with doping to reach maximum value at 7% concentration .The energy gap of was calculated for undoped and copper doped NiO films,it is noticed that the energy gap decreases with the increases of doping until it reaches the minimum value at 7% doping concentration .The D.C measurements show that the resistivity decreased with increasing doping rate,also the hall measurements have been showed the carrier concentration increased with increasing doping rate. The AFM results reveal that the grain size increases with the increase in copper concentration at rates (1%,3%) and then decreased at rates (5%,7%).The sensing measurements showed that undoped and copper doped NiO thin films have high sensitivity to NH vapor as compared to H O vapor , and the best result was 26% at doping rate 5% at 300ppm vaopr concentration ,at operation temperature 150 o c for NH vapo

الخصائص الكهربائية والبصرية لمتراكبات بوليمر - نحاس == Electrical and Optical Properties of Polymers - Cu Composites

Author name: حسنين عبد الحسين جاسم الغالبي
Supervisor name: اسرار عبد المنعم سعيد
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: في هذه الدراسة، تم تحضير نوعين من المتراكبات (Cu - PMMA)و(Cu - Epoxy) باستخدام طريقة الصب مع نسب وزنية مختلفة من جسيمات النحاس(Cu). وقد تم تشخيص النماذج للمتراكبات بطرق مختلفة مثل صور المجهر الضوئي وصور المجهر الالكتروني الماسح (SEM) والتحليل الطيفي للاشعة تحت الحمراء (FTIR) وحيود الاشعة السينية(XRD). وتمت دراسة الخصائص الكهربائية المستمرة والمتناوبة (C.D وC.A) للمتراكبات والخصائص البصرية ضمن اطوال موجية تتراوح بين (200 - 1100) نانومتر. صور المجهر الضوئي توضح توزيع جسيمات النحاس لنماذج المتراكبات (Cu - PMMA) وتبين تكون شبكه مستمرة داخل البوليمر عند النسبة الوزنية ( %.wt 60) من النحاس, بينما نماذج المتراكبات (Cu - Epoxy) لم نستطع الحصول على اي صورة لها لان هذه النماذج سميكة ومعتمة. وقد تم دراسة مورفولوجية السطح للنماذج باستخدام تقنية المجهر الالكتروني الماسح (SEM), والذي اظهر توزيع المضاف على السطح وزيادة خشونة السطح مع زيادة نسبة النحاس. وقد تم فحص طيف (FTIR) للنماذج واظهر انواع الاواصر لكل من البولمر والمتراكبات, واظهرت هذه الدراسة ان اضافة (النحاس) لم تؤثر على التركيب الكيميائي للبولمر. واظهرت النتائج التجريبية (XRD) تحويل النماذج من شبة بلورية الى بلورية بسبب زيادة نسبة جسيمات (النحاس). وقد اظهرت النتائج الكهربائية المستمرة (D.C) ان التوصيلية الكهربائية المستمرة (σD.C) للنماذج ذات النسب الوزنية الواطئة تزداد بزيادة درجة الحرارة, اي المقاومة الكهربائية لهذه النماذج تكون ذات معامل حراري سالب, وعند النسبة الوزنية ((%.wt 60) للمتراكبات (Cu - PMMA) و(%.wt 25,30, 40) للمتراكبات (Cu - Epoxy) تقل توصيليتها الكهربائية المستمرة (σD.C) بزيادة درجة الحرارة, اي المقاومة الكهربائية لهذه النماذج تكون ذات معامل حراري موجب. وان طاقة التنشيط تقل مع زيادة النسبة الوزنية للنحاس. اما في ما يتعلق بالخواص الكهربائية المتناوبة (C.A) فان ثابت العزل(ԑˈ) والفقدان العزلي (ԑ") للنماذج تتناقص مع زيادة تردد المجال الكهربائي المسلط وانها تزداد مع زيادة تركيز جسيمات (النحاس), وتزداد التوصيلية الكهربائية المتناوبة (σ_(A.C)) مع زيادة تركيز جسيمات (النحاس) والتردد، وثابتة تقريبا في الترددات العالية. اظهرت نتائج الخصائص البصرية للمتراكبات (Cu - PMMA) ان الامتصاصية ومعامل الامتصاص ومعامل الخمود ازدادت وان فجوة الطاقة للانتقال غير المباشر المسموح تناقصت مع زيادة النسبة الوزنية للنحاس. بينما الثوابت البصرية الاخرى لم نستطيع الحصول على نتائج لهذه المعاملات لان الامتصاصية عالية جدا. اما المتراكبات (Cu - Epoxy) لم نستطيع الحصول على اي خصائص بصرية لها لان هذه النماذج سميكة ومعتمة | In this study, two types of composites have been prepared : (PMMA - Cu) and (Epoxy - Cu) by using casting methods with different weight percentages of copper particles (Cu). The composites samples have been diagnosed by different methods such as optical microscope images, scanning electron microscope images (SEM), Fourier transformation infrared (FTIR) spectroscopy and X - ray diffraction (XRD). The electrical properties (D.C and A.C) of composites and optical properties of wavelengths range (200 - 1100) nm were studied. The images of optical microscope shows distribution of copper particles for (PMMA - Cu) composites samples and shows a continuous network inside the polymer at the ratio (60wt.%) of )Cu), while the (Epoxy - Cu) composites samples we cannot get any images because these samples are thick and dark. The morphology of samples have been studied using (SEM) technique, which showed grain distribution at surface morphology and grain aggregates with increasing of copper particles. The FTIR spectrum of samples were measured and shown the type of bond for polymer and composites. This study showed that the addition of (Cu) did not affect on the chemical structure of polymer. The experimental results (XRD) showed the samples transmutation from semicrystalline to crystalline because increased ratio particles of (Cu). The results show that the (D.C) electrical conductivity increases with increasing the temperature at low concentrations, where electrical resistance for these samples have a negative thermal coefficient, at (60 wt.%) of (PMMA - Cu) and (25,30,40 wt.%) of (Epoxy - Cu) composites (D.C) electrical conductivity decreases with increasing temperature, where electrical resistance for these samples have positive thermal coefficient. The activation energy decreases with increasing weight percentage of (Cu). The (A.C) electrical properties shows that the dielectric constant (ԑˈ) and dielectric loss (ԑ") of the samples decreased with increasing the frequency of applied electrical field and they increase with the increase of the concentration of (Cu). The A.C electrical conductivity (σ_(A.C)) increases with increasing the concentration of (Cu), increases with the increase frequency, and almost constant at high frequency. The results of optical measurements of the (PMMA - Cu) composites show that the absorbance, absorption coefficient and extinction coefficient increase and the energy gap of the indirect allowed transition decreases with the increasing weight percentage of (Cu), while the other optical constants we cannot get the results for these parameters because the absorbance is very high. The (Epoxy - Cu) composites we cannot get any optical properties because of these samples are thick and dark.

تحضير جسيمات اوكسيد الخارصين النانوية الممزوجة بالحديد بطريقة الليزر النبضي == Synthesis of ZnO Nanoparticles Mixed with Fe Using Pulse Laser Deposition

Author name: ايمان عكيدي مكحول
Supervisor name: سمر يونس طه
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: In this work, pulsed laser deposition (PLD) technique is employed to prepare pure ZnO and ZnO mixed with Fe thin film at different concentration on glass substrate. Nd.YAG laser beam, λ=1064 nm, repetition rate 6Hz with the pulse duration 10ns has been used to deposited ZnO and ZnO : Fe thin films under vacuum of 10 - 2mbar. The effects of the number of laser pulses (100,300,600 and 800), Fe concentration (3,5,7%wt) at ambient temperature and annealing temperature at 500ºC on the structure, optical and electrical properties of these films have been studied.The structure characteristic investigated by X - Ray Diffraction (XRD). XRD pattern showed that as number of laser pulses increase the structure changed from amorphous to polycrystalline at 800 laser pulses for pure ZnO. For ZnO : Fe(3%) the structure stay polycrystalline and the intensity increased also the grain size increase. Same result obtained as the concentration of Fe increased (3,5and 7%) for ZnO : Fe thin films and after annealing.The morphology is analyzed by AFM technique. The AFM results showed that the Root Mean Square (RMS) of surface roughness is increased with increasing number of laser pulses from 5.96 nm to7.16 nm and from 3.23nm to 10.2nm for both films of pure ZnO and ZnO : 3%Fe respectively. The RMS for both surfaces were increased at the pulses range 4.15nm to 8.55nm when increasing Fe concentration at ambient temperature and conducted by annealing process.The optical properties measured by UV - VIS spectrometer to compute the band gap of pure ZnO and ZnO : Fe were found high transparent in the visible region band gap for ZnO and ZnO : 3%Fe were decreased from 3.13 eV to 2.9eV and from 2.8eV to 2.55eV respectively. As well as the energy gap was found severe reducing in its values when the Fe increased, where the energy gap suffer decreased and became 3.02eV to 2.52 eV at ambient temperature and from 3.15 eV to 2.7eV after performed annealing process.The hall effect measurement proves that the pure ZnO and ZnO : Fe are n - type semiconductor, the conductivity is increased by increasing mixing Fe concentration where the value was increased from 6.4X10 - 4 Ω. - 1cm. - 1 to 6.37 Ω. - 1cm. - 1 and from 1.97X10 - 5 Ω. - 1cm. - 1 to 5.207 Ω. - 1cm. - 1 when achieved annealing at 500ºC.

دراسة نظرية لليزر الليف البصري المطعم بالنديميوم == Theoretical Study for Neodymium - Doped Optical Fiber Laser

Author name: امجد عبد الحميد سلمان
Supervisor name: مظهر شهاب احمد
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: to find equation of lasing output power (Pout) by using the numerical emulation Secondly, calculating the (Pout) of Nd+3 - doped optical fiber laser as a typical example for the optical fiber laser, which is process according to this system. The required equations to calculate (Pout) was programmed by Matlab program (version8.1). Two types of hosts were used in this simulation, the first type is Silica with four designs using commonly in the above mentioned, the four designs are Lycom (a), Lycom (b), York and IVA with lasing emission at the wavelengths (1064×10 - 9m) and (1331×10 - 9m). The second type of hosts is ZBLAN with only one design is Le Verre fluore, with lasing emission at two wavelengths (1048×10 - 9m) and (1317×10 - 9m). The first step in this emulation was determining the value of numerical aperture (NA) for each design of special designs and at the special wavelengths for every host, which can obtain the highest values of lasing output power (Pout) and efficiency (η) at value of (NA).The second step was calculating the (Pout) corresponding to pump power (Po) for each host according to the designs and the wavelengths related to the host, In case of the host Silica, for the two wavelengths of this host, it is found that the (Pout) was the highest value when the design (York) was used, while in case of the host (ZBLAN), it is found the highest value of (Pout) is when using the wavelength (1048×10 - 9m). For addition that, it is found that to obtain the highest values of (Pout) and (η) for this type of laser, it must be use the host Silica at the wavelength (1048×10 - 9m). According to that, the third step was using this host and this wavelength to calculate the effect of the numerical aperture (NA), core radius (a), cladding radius (b), fiber length (L),reflection coefficients (R2), Nd+3 - dopant concentration in the core (No), lifetime of upper laser level (T2) and pump power (Po) on the (Pout). The changing of the above mentioned coefficients values was determinate with its range which is finding in four designs related to the host Silica. It is found that the value of (Pout) decreased with the increase of the values of (NA, a, b, L and No), while increase with the increase of the values of (R2 ,T2 and Po), through that, the optimal values of these coefficients which must be used to obtain the highest values of (Pout) and (η) for this type of laser.

دراسة تاثير زاوية الترسيب على الخصائص البصرية والكهربائية لاغشية (SnxTe1 - x) الرقيقة == Study the Effect of Deposition Angle on the Optical and Electrical Properties of (SnxTe1 - x) Thin Films

Author name: احمد ابراهيم جواد الحسيني
Supervisor name: رعد سعيد عبد الراوي
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: تم في هذا البحث دراسة الخصائص التركيبية والبصرية والكهربائية لاغشية ((Sn0.3Te0.7,Sn0.5Te0.5,Sn0.7Te0.3المحضرة بطريقة الترسيب الحراري الفراغي على قواعد زجاجية عند درجة حرارة الغرفة وبزوايا ترسيب مختلفة θ=(0 ̊, 40 ̊, 70 ̊ ) وبسمك (100 ±10 nm) للخصائص التركيبية وبسمك10 nm) (50 ± للخصائص البصرية وايضا بسمك10 nm) (350 ± للخصائص الكهربائية ولدراسة تاثير تغير السمك(250,300,350)nm على الخصائص الكهربائية لاغشية (Sn0.5Te0.5).استخدمت تقنية حيود الاشعة السينية لدراسة الخصائص التركيبية لاغشية ((Sn0.3Te0.7,Sn0.5Te0.5,Sn0.7Te0.3. المرسبة بزوايا ترسيب مختلفة وقد اظهر نموذج الحيود ان جميع الاغشية متعددة التبلور. الحجم الحبيبي يقل بزيادة زاوية الترسيب بينما تزيد كل من كثافة الانخلاعات والمطاوعة المايكروية بزيادة زاوية الترسيب.درست الخصائص البصرية للمدى الطيفي )nm 300 - 900) , ان زيادة نسبة Te يؤدي الى تقليل النفاذية والانعكاسية وزيادة قيمة الامتصاصية.ان زيادة زاوية الترسيب له تاثير واضح في تقليل النفاذية وزيادة الامتصاصية مع ازاحة نحو الاطوال الموجية الطويلة. اما بالنسبة لفجوة الطاقة المباشرة المسموحة فتقل مع زيادة زاوية الترسيب وتزداد مع زيادة نسبة Te .ان قيم معامل الامتصاص ومعامل الخمود تزداد بزيادة زاوية الترسيب في حين تقل قيم كل من الانعكاسية ومعامل الانكسار وثوابت العزل الحقيقية والخيالية مع زيادة زاوية الترسيب.اما الخصائص الكهربائية فان التوصيلية الكهربائية تزداد مع زيادة درجة الحرارة ومعامل سيبك يزداد مع زيادة فرق درجات الحرارة لكل زاوية الترسيب .وان زيادة زاوية الترسيب ونسبة Te له تاثير واضح في تقليل التوصيلية الكهربائية والتيار وزيادة معامل سيبك .وايضزايادة سمك الغشاء له تاثير بزيادة التوصيلية الكهربائية والتيار وتقليل معامل سيبك . | In this research, studies the structural ,optical and electrical properties of (Sn0.3Te0.7 , Sn0.5Te0.5 and Sn0.7Te0.3) thin films prepared by thermal vacuum deposition method on glass substrates at room temperature and different angles of deposition θ = (0 ̊,40 ̊,70 ̊ ) with thickness (100nm ±10nm) for the structural properties and (50nm ±10nm) for the optical properties also a study of the electrical properties of (Sn0.5Te0.5) thin films deposited with different angles of deposition θ =(0 ̊,40 ̊,70 ̊ ) with thickness (250,300,350)nm. The X - ray diffraction technique (XRD) has been used to study the structural properties of (Sn0.3Te0.7, Sn0.5Te0.5 and Sn0.7Te0.3) films deposited at oblique angles and it has appeared that the films are polycrystalline. The grain size decreases with increasing deposition angle, while the micro strain and dislocation density are increased with increasing deposition angle. The optical properties are taken for spectral range (300 - 900) nm. The transmittance decreases with increasing the Te percentage, while the reflectance increases with decreasing Te percentage. The absorptance increases with the increasing of Te percentage. The increasing in deposition angle has an obvious influence in the decreasing of transmittance and increasing of absorptance with shifting toward long wavelengths. The energy gap value decreases with the increasing deposition angle, the allowed direct transition increase with increasing the Te percentage. The absorption coefficient, extinction coefficient and imaginary dielectric constant values are increased with increasing deposition angle, while the refractive index, real dielectric constant values are decreased with increasing deposition angle. The electrical conductivity increases with increasing temperature. Seebeck Coefficient increase with increasing the temperatures difference for all deposition angles. The increasing of deposition angle and Te percentage have an obvious influence in the decreasing of D.C conductivity and current and increasing of Seebeck Coefficient. Also the increasing of thicknesses for all deposition angles have an obvious influence in the increasing of D.C conductivity and current and decreasing of Seebeck Coefficient .The current is increasing in light when it complains with dark

التحليل وتطبيق بواسطة الحاسبة للخلية الكهروضوئية في المغير المستمر == A Computer Simulation and Application of PV cell on DC - DC Converter

Author name: زيد سمير جبار السامرائي
Supervisor name: زينب منذر يونس كبة
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: المنظومات الكهروضوئية تولد الكهرباء بواسطة التحويل المباشر للطاقة الشمسية وتعتبر نظام متكامل بسبب كونها مركبة من مجموعة قطع من العناصر. الدراسة النظرية للانظمة الشمسية وتقنيات انشاء موديل لها باستخدام دوائر كهربائية مكافئة كذلك خصائص الخلية الشمسية ستكون مطروقة في هذا البحث. الموديل الجديد للخلية الشمسية سيتم تحقيقه باستخدام برنامج التحليل pspice. الفولتية المثالية كانت 17volt والتيار المثالي كان 4.41A. هذا الموديل سيستخدم في المغير المستمر والذي يمتلك المواصفات التالية، فولتية خرج متغيرمن (1.5V - 12V)، التردد المفتاحي 20kHZ ، دورة الفرض (0.1 - 0.7)، وقدرة الخرج من (1W - 41.6W). المنظومة مصممة ومفحوصة بواسطة برنامج التحليل pspice. تطبيقات موديل الخلية الشمسية والبطارية ستنفذ في المغير المستمر. نتائج التحليل للمغير التي حصلنا عليها من كلا المدخلين اعطت توافق كبير في قيم النتائج. | Photovoltaic system generates electricity by the direct conversion of the sun's energy and it is a modular system because it is built out of several pieces of elements. The theoretical studies of PV and modeling techniques using equivalent electric circuits carried out and the characteristics of PV cell have been investigated. The new model of PV implemented in pspice program, the optimum voltage was (17volt) and optimum current was (4.41Ampere). This model is used in the DC - DC converter which has the following characteristics, the variable output voltage is (1.5V - 12V), switching frequency (20 kHz), duty cycle (0.1 - 0.7) and the output power (1W - 41.6W), the system has been design and tested by pspice program. The application of PV and battery implement in the DC - DC converter, the results of the converter simulation obtained from both two input show a good agreement.

مسار الالكترون داخل المموج اللولبي لليزر الكترون الحر == The Trajectory of Electron in Free Electron Laser Helical Undulator

Author name: زينة محمود الداغستاني
Supervisor name: محمد عز الدين الصندوق
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: نظرية البعد الواحد استخدمت لدراسة اداء مكبر ليزر الالكترون الحر عندما تملك حزمة الالكترونات توزيع منتظم للكثافة في مسار عمودي على محور المموج اللولبي مع اطوار ابتدائية منتظمة توزع بين فترة (0 - 2π ). لقد تم استخدم برنامج matlab 6.1 في بناء برامج الدراسة.في هذا العمل تمت دراسة لحركة الالكترون داخل المموج اللولبي واستنادا الى معادلات الحركة للالكترون فقد تم التركيز على العوامل الثلاثة التالية : 1 - المجال المغناطيسي2 - فترة المموج3 - عامل لورنتز حيث ان الزيادة في المجال المغناطيسي تؤدي الى الزيادة في نصف قطرمسار الالكترون وكمية السرعة المستعرضة للالكترون وبنفس الوقت تؤدي الى النقصان في كمية السرعة الطولية للالكترون. اما في حالة فترة المموج نلالحظ تكرار الظواهر اعلاه في حالة المجال المغناطيسي مع اختلاف السلوك الموجي للالكترون بسبب اختلاف المعادلات المستخدمة فى هذه الحالة.واخيرا الحالة الثالثة فان الزيادة في عامل لورنتز تؤدي الى النقصان في نصف قطرمسار الالكترون وكمية السرعة المستعرضة للالكترون وفي نفس الوقت تؤدي الى الزيادة في كمية السرعة الطولية للالكترون.الظواهر السابقة تمت مناقشتها حسب قانون حفظ الطاقة داخل المموج اللولبي. كذلك تمت المناقشة لدراسة تاثير طور الالكترون, المجال المغناطيسي للمموج وفترة المموج بوجود المجال الكهربائي للموجة الكهرومغناطيسة الداخلة( مثل موجة الليزر المراد تكبيرها) على كمية واتجاه السرعة الطولية للالكترون. حيث وجد ان هنالك زيادة في كمية السرعة الطولية للالكترون تحت تاثير نفس العوامل سواء ان كان مجال مغناطيسي او فترة المموج في هذه الحالة مقارنة مع الحالة الاولى التى تكون بغياب المجال الكهربائي. | The One - dimension theory is applied to study the performance of free electron laser amplifier when the electron beam have a uniform density distribution in the direction perpendicular to the helical undulator axis with initial phases uniformly distributed along the interval (0 - 2π). The matlab 6.1 program is used to built the computer programs that used in this work. In the present work, the motion of electron are considered inside the helical undulator. The equations of motion for electron inside the undulator, show that three effecting parameters, they are : 1 - Undulator magnetic field2 - Undulator period3 - Lorentz factorThe increase in undulator magnetic field leads to increase in the radius of electron trajectory, and the magnitude of transverse electron velocity and at same time leads to decreasing the magnitude of the longitudinal electron velocity.The above effects of undulator magnetic field be reapted in the case of undulator period. Owing to the differences in the equations that used in this case, it is found differences in waves behavior of electron.At last, the increase in Lorentz factor leads to decreasing in the radius of electron trajectory and magnitude of transverse electron velocity and also causes an increasing in magnitude of the longitudinal electron velocity.The effects above discussed as a result of the law of the conservation of energy inside the undulator.The motion of electron is also considered under the effect of the presence of electric field that may be as an electrical component of electromagnetic wave (laser). As comparing with first case (when there is no electric field), there are increasing in the magnitude of longitudinal electron velocity and a variation in electron energy. Within this case, the effect of the phase of electron, undulator magnetic field and undulator period are studied

درجة الحرارة المميزة وطاقة الاثارة الدنيا لليزر النقطة الكمية الشبه الموصل == Characteristic Temperature and Lowest Excitation Energy of Semiconductor QD laser

Author name: غيث منور علي
Supervisor name: رائد محمد حسن
General topic: Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: In this work, we have studied important theoretical relationships in Semiconductor Quantum Dot Laser (QDL) Characteristics.The study is based on theoretical model equations that are derived from the rate equations. The equations were applied on experimental parameters of continuous - wave QDL GaInP/InP at 1.55μm wavelength to get theoretical simulation of the characteristics of this laser type.We also studied the temperature effect on the internal losses and the impact of these losses in determining the characteristics of the temperature of QD. The results were presented within two cases; the first is when there are no internal absorption losses and the second where there is no existence of these losses. Also, we studied the effect of ambient temperature on the characteristics of temperature for each of QD and OCL.The lowest excitation energy of QD has been studied in two control cases : with surface density of QD and with cross - section of internal losses.Throughout changing many systems and control parameters, the effects of these parameters have been studied according to the different kinds of relationships. In this research, we have studied the parameters : Surface density of QD, mean size of QD, optical confinement layer, radiative constant for OCL material, spontaneous radiative recombination time, root mean square of QD size fluctuations, cavity length and mirrors reflectivity.Some of the results in this work were compared with other experimental results of other researchers who applied the QDL model and showed a good matching.

حساب كثافة الحاملات في طبقة الحصر البصري واشغال الحاملات المحصورة في منظومة ليزر النقطة الكمية نوع GaInAsP/InP == Calculating the Carrier Density in OCL and Confined Carrier Occupation in Quantum Dot Laser System Type GaInAsP/InP

Author name: ایمان ذیاب شرشاب
Supervisor name: رائد محمد حسن
General topic: Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: In this work, we have studied many control parameters effect which plays an important role to determine the density concentration of carriers in the Quantum Dot Laser (QDL) system. Our study is based on theoretical model equations which derived from the rate equations. The equations were applied to the GaInAsP/InP QDL with wavelength 1.55μm. We produce a theoretical simulation and analytical solution of the equations by a Mathematical program.Theoretical equations are used to study the effect the parameters by controlling the value of each : the carrier's density and occupancy of the Level of a carrier confined in a QD. There are two cases : when the cross - section of the internal absorption losses has a influential amount and a nather it case when approaching zero border. As well as, we study the impact of the parameters on the threshold current density and its compounds. In addition, we study the role of these parameter to determining the maximum temperature of QDL operation through effect on temperature rang of the system.The temperature effects on the carriers’ activities in the system are studied, whereas the characteristics temperature of QDL has been studied in the two cases : with / without internal losses.The effects of structure and control parameters are applied to Study many factors. Such as : surface density of QD, mean size of QDs, optical confinement layer, spontaneous radioactive recombination time and resonator losses.

دراسة مقارنة بين ليزرات الابار الكمية والنقاط الكمية == Comparative Study Between Quantum Wells and Quantum Dots Lasers

Author name: وطن حمود جبر
Supervisor name: جاسب عبد الحسين مشاري
General topic: Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: In the work we present a comprehensive comparison between the dynamics of quantum well and quantum dot semiconductor lasers working autonomously using two models, the first describe the temporal variation of carriers and photon densities respectively in the quantum well lasers and the second describe the carriers occupancies in the wetting layer and quantum dot and photon occupancy in the quantum dot lasers .The study was carried out on the delay time and level of the dc part of their power under the effect of the many parameters that appeared in those models. Both lasers dynamics were studied in the presence of injection current modulation which enhances lasers power range from periodic to chaotic one with varieties of periodic states such as period.1, period.2, period.3, period.4 and period.6. Developed chaos was noticed to occur.We propose and investigate a simple method to obtain complex output power from both lasers via pulse shaping of the injection current. During the three methods studied we noticed similarities and discrepancies in both lasers dynamics.

دراسة الخواص البصرية والكهربائية ومحدد القدرة البصري للصبغات العضوية المشوبة للاغشية البوليمرية == STUDY OF THE OPTICAL AND ELECTRICAL PROPERTIES,AND OPTICAL POWER LIMITING OF ORGANIC DYES DOPED POLYMER FILMS

Author name: فيصل صادق ثامر
Supervisor name: عماد الدين حسين علي السعيدي
General topic: Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: This thesis contains results of a extensive study for many important and fundamental properties of two organic dyes, these are Phenol Red and Light Green SF Yellowish. To obtain the dye doped polymer films used for our study, the Polymethylmethacrylate (PMMA) polymer was doped by each one of these dyes , at different concentrations : 0.01, 0.02, 0.03, 0.04, 0.05, 0.30, 0.40 mM . Effect of adding small amount of Iodine (I2) , as a dopant, to the constituents of the dye doped polymer films at concentration of 0.03 mM for each dye, on the optical and electrical properties of the polymer films, was also studied. Casting method was used for preparing the dye doped polymer films samples.The present work involves the study of the linear and the nonlinear optical properties, and the optical power limiting of the dye doped polymer films, as well as study of the electrical properties of these films.We have studied the optical properties of both the dye - doped polymer films and the dye - doped polymer films with Iodine (I2). The study includes the following parameters : absorbance (A), transmittance (T), reflectance (R),iiabsorption coefficient (α), extinction coefficient (k), refractive index (n), dielectric constant (ε) with its real (εr) and imaginary (εi) parts, optical conductivity (σopt.), electrical conductivity (σelec.), and optical energy band gap (Eg).The results of the optical properties show that the dye - doped polymer films having high transmittance (T) , low reflectance (R) , and low absorption coefficient (α ) , over the wavelengths of the visible spectrum, and these films have energy band gaps belong to the indirect transitions. While the dye - doped polymer films with added different doping ratio of Iodine (I2), have low transmittance (T) and an increase in the values of reflectance (R) and absorption coefficient (α ), particularly in the absorption regions over the wavelengths near the ultraviolet (UV) region of the the electromagnetic spectrum.To study the nonlinear optical properties of the dye - doped polymer films, the laser beam z - scan technique was used with solid state laser (SSL) operating at the continuous wave (CW) at 532 nm. The laser output can be varied within the range 0 - 100 mW. The obtained results showed that the samples of the dye - doped polymer films as well as the samples of the dye - doped polymer films with Iodine(I2) have a nonlinear refractive index with negative value (n2 < 0) (occurrence of the self - defocusing effect) and aiiinonlinear absorption coefficient with negative value also (β < 0) (occurrence of the saturable absorption).We have studied the optical power limiting for the prepared films samples , using the laser beam z - scan technique. We have obtained optical power limiting with good optical properties. The results revealed that the smallest value for optical power limiting threshold is 15 mW for the Phenol red dye doped polymer film sample at concentration of 0.03 mM with Iodine doping ratio 36.2 % of the dye weight.Also, The electrical properties of the prepared samples, the dye - doped polymer films and the dye - doped polymer films with Iodine (I2), have been studied using the current - voltage (I - V) characteristic for three temperature degree values , which are given to these samples, these are : 298 K, 308 K and 318 K. The values of the electrical conductivity (σ) and the electrical conductivity activation energy (Ea) of polymer film were calculated. The influence of changing the temperature on these parameters was studied.The results obtained from the present our study indicate that the two organic dyes, Phenol Red and Light Green SF Yellowish, are good candidates for optical applications and they could be used for the photonic devices, the photo - electronic devices , and also in the optical power limiting

دراسة الخواص البصرية والكهربائية لصبغات عضوية == Study of optical and electrical properties of organic dyes

Author name: علي ستار جبار الصيمري
Supervisor name: وليد علي حسين | فرات احمد مهدي
General topic: Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: In this study, thin films of polyvinyl alcohol (PVA) doped with Orange G , Safranin O , and Crystal Violet dyes , have been prepared by using casting method after dissolving the dyes with distilled water .The linear optical parameters of the prepared thin films such as absorption coefficient (α) , extinction coefficient (k) , refractive index (no) and energy gap (Eg) , in addition to Urbach tails (Eu) , both real (εr) and imaginary (εi) parts of the dielectric constant , optical conductivity (σopt) , and electrical conductivity (σele) have been studied. The non linear absorption coefficient (β), non linear refractive index (n2) and the susceptibility of the third order (χ3) have been studied too .It is found that the absorption spectra of the prepared thin films are characterized by a clear absorption peaks in the visible range of the light spectrum . For Orange G two absorption peaks were appeared at the wavelengths (325 nm) and (490 nm) , where as one absorption peak is observed for each of Safranin O , and Crystal Violet at the wavelength (540nm) and (600nm) respectively. It is worth noting that the different concentrations of the dyes have an obvious traces on the absorption intensities of the thin films , which may be related to the extended Urbach tails as a result of increased dye concentration and (π - π*) transition .The estimated energy gaps gave an indication that an indirect allowed electronic transition take place and it is inversely slightly affected by the concentration of the dyes.The non linear optical properties for the prepared thin films were studied using Z - scan technique . Three different cases in which the materials are ; thedye solution consist of the dye dissolved in distilled water , the dye solution mixed with the polymer , and the dye doped thin polymer film , were studied using continuous wavelength (532 nm) solid state semiconductor laser type (SDL - 532 - 100T) .The results indicated that the calculated (β) and (n2) increases as a results of increase in the concentration for all the three mentioned cases . Defocusing due to thermal distribution through the samples which were accompanied with a changes in non linear refractive index were shown , that is , the samples behave like a thermal lens that distort the phase of the propagated beam in it .The (I - V) characteristics for all thin films give an indication of Ohmic behavior and the DC electrical conductivity (σele) increases as the temperature increase . The activation energies (Ea) were found to be decrease at higher dyes concentrations .

تضمين البرم في ليزرات اشباه الموصلات (ليزرات البرم) == Spin Modulation in Semiconductor Lasers (Spin lasers

Author name: ضیاء جبار عكوش
Supervisor name: حسن عبد الله سلطان
General topic: Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: The introducing of electronic spin with its charge is the key of many applications which uses the electrical and magnetic properties of the electron , (spintronics )and semiconductor lasers.This concept gives led to the newest type of semiconductor lasers called ( Spin Lasers ).In the present thesis a numerical study of the effect of the carriers spin on the semiconductor lasers described by VCSEL using Matlab and Runge - Kutta method .The study includes the effect of the spin polarization in terms of the polarization injection and the injection current also to find the two thresholds of right polarized light circularly and the left circularly polarized one.The effect of the spin relaxation time on the dynamics of spin - VCSEL such as the steady state time evolution and direct modulation of the injection current and the polarization injection were studied also is presented too.The study shows that the spin VCSEL strongly affected by the injection current , polarization injection and spin relaxation time.The present results show that the laser threshold can reduced to quarter than that of conventional laser.

تاثير م عاملات الاضطراب الجوي على حسابات منظوما ت المدى الليزرية == Effect of Atmospheric Turbulence parameters on Laser Range systems calculations

Author name: صادق عطية راشد
Supervisor name: حسن حمادي محمد
General topic: Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: In this thesis, an equation of atmospheric turbulence factor were derived the effect of such factor of the laser beam path of Er - Glass laser of ( 1.54m)wavelength. The results were copared at distances and propagation modes of laser beam in the atmosphere. Analysis system was used to determining the effect of atmospheric turbulent parameters, which are : laser beam radius at transmitter Wo, turbulent factor turb τ and intensity correction at target surface Pshape . And received power at photo detector for laser range finder LRF, additional study of effect the variation of refractive index strcture paramete 2 n c , inner - scale turbulence l , and the aperture dimension of photo receiver rec. r on the values and shape of receiving power, according the signal to noise ratio SNR equation , maximum range of the LRF in different weather conditions and compared with the results of the international literatures. New equation of Gaussian beam for calculation the efficiency of LRF system performance in the turbulent medium. Analytical comparsion for power and range calculations from the concluded equation of the Gaussian beam which take into consideration the effect of the turbulent attenuation in the range calculation, A special equation for power shift in the different two cases, which are in the present and absent of turbulence.A partical addition to this study, the weather elements are measured in to the Basrah city atmosphere locally with the maximum range Rmax for the LRF in the two different season summer and winter.An equation of receiving rangeof laser target designator system LTD using Lambert function is estimated and compared its results with concluded equation of recent researches. MATLAB - 7 sorces code program were written to declare the effect of turbulent parameters on ranging and disgnation calculations, also describe the effect of the laser beam power variation in range calculations. The ideas and results of this study are used to design an LRF and LTD in different weather conditions and alternative weather turbulent variance.

الاتصالات الفوضوية في ليزر شبه الموصل النقطي الكمي باستخدام التغذية العكسية البصرية == Chaotic Communication of Quantum Dot Semiconductor Laser with Optical Feedback

Author name: افراح ياس حمدان الدليمي
Supervisor name: باسم عبد اللطيف غالب
General topic: Physics
Degree: Master
Language: Arabic
University location: Babylon
First pages:
Abstract: يعتبر ليزر شبه الموصل النقطي الكمي البداية الجديدة في تطورات الليزر , وليزر مهم من ليزرات النانوتكنولوجي لتطبيقه واستخدامه في المجالات الطبية والصناعية اضافة لتطبيقه في مجال الاتصالات . تتضمن الرسالة الحالية دراسة الفوضى في الاتصالات عن طريق نمذجة معادلات المعدل ودراسة ديناميكية ليزر شبه الموصل النقطي الكمي . تعتمد ديناميكية ليزر شبه الموصل النقطي الكمي على عدة عوامل منهزامن التاخير الذي من خلاله تمكنا من دراسة طول التجويف الخارجي القصير والطويل بوجود التغذية العكسية وبالاعتماد على النتائج العملية. تم تحديد قيم طول التجويف الخارجي القصير والطويل حسب اهميتها في التطبيقات العملية ومنها الاتصالات عند تغير عامل تعزيز عرض الخط .اضافة الى تحديد الحالات المستقرة والدورية وشبه الدورية والحالات الفوضوية وامكانية حصول الفوضى شبه المستقرة .تمت دراسة منظومة اتصالات لليزرين من ليزرات اشباه الموصلات النقطية الكمية تتكون من ليزر شبه الموصل النقطي الكمي المرسل وليزر شبه الموصل النقطي الكمي المستقبل وامكانية التزامن بينهما ودراسة علاقة كثافة الفوتونات واحتمالية الملئ لحاملات الشحنة مع عدد حاملات الشحنة لكل من الليزرين , اضافة لدراسة تضمين خرج الليزر باشارة مضمنه ومحاولة فكها بعد استلامها من الليزر المستقبل . هذه الدراسة تمت بحل معادلات المعدل للنظام المستخدم بطريقة رنج - كتا للمرتبة الثانية المسماة (dde23) باستخدام برنامج MAThLAB .
1 ... 6 7 8 9 10 11