عرض: 25 50 75 100 النتائج

نتائج البحث: 25 من أصل 33,347

مبرهنات النقاط الصامدة التكرارية لتطبيقات متعددة القيم Iterative Fixed Points Theorems for Set - Valued Mappings

المستخلص: في هذه الرسالة تم اعطاء مبرهنات التقارب لمخطط تكرارات - s لبعض الفئات من تطبيقات متعددة القيم. تم تضمين هذه النتائج في اربع محاور. للمرة الاولى يتم التعامل مع هذا النوع من مخطط التكرارات لتطبيقات شبه الانكماشية المعممة للبرهنة على نتائج جديدة في نظرية النقطة الصامدة التقريبية. في النتائج الاخرى تم التعامل مع تطبيقات متعددة القيم من نوع مثل - انكماش معمم واللامتمدد وk - الانكماش الكاذب بقوة ولبشز k - الانكماش الكاذب بقوة والرتيبة. تم دراسة تطوير تكرار s والمسمى تكرار S_(prox.) للحصول على نتائج في التقارب الضعيف لتطبيقات متعددة القيم من نوع k - الانكماش الكاذب بقوة والتقارب القوي لتطبيقات متعددة القيم من نوع L - لبشز الكاذب بقوة وشبه الانكماش واللامتمددة المعممة. تم دراسة بعض المقارنات والتي هي التكافؤ بين تكرار - s وتكرار بيكارد - مان وتكرار مان ذو الخطوتين وتكرار ايشيكاوا. تبين ان تكرار - s اسرع من الاخرين عدا تكرار ايشيكاوا. نتيجة تكافؤ اخرى كانت بين S_(prox.) وتكرار بيكارد - مان. هنا، يمكن استخدام تكرار - s لحل معادلة تفاضلية تباطوئية وحل نظام بمعادلتين لتطبيقات ϕ - التراكمية متعددة القيم مع مناقشتها. بالاضافة على ماسبق تم البرهنة على نتيجة حول البيانات المعتمدة للنقطة الصامدة ونتائج تقارب لتطبيقات انكماشية تكاملية وكذلك عدد حالات تكافؤ في حالة التطبيقات ذات القيمة الواحدة. | In this thesis, general convergence theorems for s - iterations scheme in some classes of multi - valued mappings are given. These results are included in four pivots. For the first time are dealt with this kind of scheme for the general quasi multi - valued mappings to prove new results in approximating fixed point theory. Other results have been dealing with multi - valued mappings, such as, general like - contraction, nonexpansive, Lipschitz k - strictly pseudo contraction, k - strictly pseudo contraction and monotone. The modification of s - iteration, which is called s_(prox.) - iteration, have been studied to obtain results about weak convergence for k - strictly pseudo - contractive multi - valued mappings and strong convergence for L - Lipschitz pseudo - contractive multi - valued mappings, quasi - contractive multi - valued mappings and generalized nonexpansive multi - valued mappings. Some comparisons have been studied which are the equivalence between s - iteration, Picard - Mann, 2step - Mann iteration and Ishikawa iterations schemes. s - iteration is faster than others unless Ishikawa iteration. Another equivalence results is studies between s_(prox.) - iteration and Picard - Mann. Here, s - iteration method can be used to solve delay differential equations and solve a system of two multi - valued ϕ - accretive mappings with retarded argument. In addition to the above a data dependence result is proven for fixed point, convergence results for integral contraction are deduced and many equivalence cases are appointed for single - valued mappings.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الجامعة: جامعة بغداد
الدرجة: ماجستير
الموضوع الدقيق: الرياضيات
السنة: 2017
الموضوع العام: علوم الرياضيات
اسم المشرف: سلوى سلمان عبد
اسم المؤلف: رنا فاضل عباس

حول مقدرات التقلص لمعلمة الشكل للتوزيع الاسي المعمم On Shrunken Estimation of Generalized Exponential Distribution

المستخلص: تم العمل في الرسالة على تقدير معلمة الشكل α للتوزيع الاسي المعمم ذي المعلمتين Generalized Exponential Distribution Two parameterعندما تكون معلمة القياس λ معلومه وذلك باعتماد المعلومات المسبقة α_0 المتوافرة حول المعلمة الحقيقية α بشكل قيم اوليه وباستعمال بعض مقدرات الاختبار الاولي المقلصة ذوات المرحلة الواحدة وذوات المرحلتين Pretest Single and Double Stage Shrinkage Estimators فضلا عن استعمال بعض مقدرات الاختبار الاولي البيزية المقلصة ذوات المرحلة الواحدة والمرحلتين Pretest Single and Double Stage Bayesian Shrinkage Estimators فضلا عن استعمال ثلاث مجالات للاختبار R_i ;i=1,2,3 وبعض دوال التقلص الموزونة Shrinkage Weight Function بشكل Ψ(α ̂) اذ ان 0≤Ψ(α ̂)≤1 والتي اقترحت لتكون اما دالة ثابته او دالة تعتمد المقدر α ̂.وقد تضمنت الرسالة خمسة فصول، اذ تناول الفصل الاول مقدمة عامة عن التوزيع الاسي المعمم ذي المعلمتين GE(α,λ) عرفت من خلالها التوزيع, وخصائصه، مميزاته, وادبيات الموضوع واختتمت الفصل بالهدف من الرساله اما الفصل الثاني فقد تضمن اقتراح مقدرات الاختبار الاولي المقلصة ذات المرحلة الواحدة لمعلمة الشكل α للتوزيع الاسي المعمم ذي المعلمتين باستعمال مقدر الامكان الاعظم MLE ولمختلف دوال التقلص الموزونه ومجالات الاختبار الاولي فيما تضمن الفصل الثالث اقتراح مقدرات الاختبار الاولي المقلصة ذوات المرحلتين لمعلمة الشكل لتوزيع GE(α,λ) وللمقدر نفسه (MLE) ولمختلف دوال التقلص الموزونه ومجال الاختبار الاولي R1 . وهذا شان الفصل الرابع الذي تضمن اقتراح مقدرات الاختبار الاولي البيزية المقلصة ذات المرحلة الواحدة لمعلمة الشكل α للتوزيع الاسي المعمم باستعمال نوعين من التوزيعات الاولية وهما Non - Informative, Improper Prior distributionsوباستعمال دالة الخسارة التربيعية Squared error Loss function في حين تضمن الفصل الخامس اقتراح مقدرات الاختبار الاولي البيزية المقلصة ذوات المرحلتين وباستعمال دوال تقلص موزونه مختلفه ومجال الاختبار الاولي R1 .فضلاعن اشتقاق صيغ التحيز(Bias) ، معدل مربعات الخطا (MSE)، الكفاءة النسبية Relative Efficiency ، حجم العينة المتوقع Expected Sample Size ، حجم العينة المتوقع النسبيExpected Sample Size Proportion ، نسبة الادخار في حجم العينةPercentage of the overall sample saved واحتمالية استبعاد المرحلة الثانية Probability of a voiding the second sampleوذلك لدراسة سلوك المقدرات المقترحة ، وقد تمخض عن هذه الدراسة نتائج عددية واستنتاجات للصيغ المذكورة اعلاه من خلال محاكاة بعض الثوابت التي تضمنتها تلك الصيغ باستعمال برنامج (Mathcad) وتم وضع النتائج في جداول نهاية كل فصل.وختاما اوجدت ببعض المقارنات التي توصلت اليها من خلال مقارنة النتائج مع بعضها البعض ومقارنتها ايضا مع المقدرات الكلاسيكية والمقدرات المقترحة سابقا من قبل بعض الباحثين وذلك باستعمال بعض المؤشرات الاحصائية مثل الكفاءة النسبية ونسبة التحيز ، وقد خلصت النتائج الى ان مقدرات الاختبار الاولي المقلصة ذوات المرحلة الواحدة وذوات المرحلتين المقترحة وكذلك مقدرات الاختبار الاولي المقلصة البيزية ذوات المرحلة الواحدة والمرحلتين هي الافضل من حيث الكفاءة النسبية ونسبة التحيز. | In Thesis, estimated the shape parameter α for the Generalized Exponential Distribution of the two Parameter Generalized Exponential Distribution when the Scale parameter λ is known by relying on prior information α_0 that available about the real parameter α as initial value and by the use of Pretest Single and Double Stage Shrinkage Estimators and the pretest single and Double stage Bayesian Shrinkage Estimators in addition to the use of three regions of the test R_i ;i=1,2,3 and some Shrinkage Weight Functions Ψ(α ̂ ) such that (0 ≤ Ψ (α ̂ ) ≤ 1) which is proposed to be either constant or a function based on the classical or Bayesian estimator (α ̂ ). The thesis included five chapters, where is the first chapter 1^st dealt with a general introduction to generalized exponential distribution with two parameters GE (α, λ) through which I identify the distribution, its characteristics, advantages, and the literature Review and concluded the chapter with the purpose of the thesis, The second chapter 2^nd included the proposal of the of Pretest Single Stage Shrinkage Estimators for the shape parameter α of generalized exponential distribution with two parameters by using the Maximum Likelihood Estimator MLE, various Shrinkage Weight Functions and the pretest Regions. The third chapter 3^rd included a proposal for the Pretest Double Stage Shrinkage Estimators for the shape parameter to GE (α, λ) distribution for the same Estimator (MLE) and the for the various Shrinkage Weight Functions and Pretest Region R1.This is like the fourth chapter 4^th, which included a proposal for Pretest Single Stage Bayesian Shrinkage Estimators for the shape parameter α for generalized exponential distribution by using two types of Prior distributions which are : Non - Informative and Improper Prior distributions and by the use of squared error loss function, while the fifth Chapter 5^th included a proposal of Pretest Double Stage Bayesian Shrinkage Estimators for the shape parameter α of Generalized Exponential distribution and by using various Shrinkage Weight Functions and the area of the pretest R. Furthermore, the expressions of Bias, the Mean square error, Relative Efficiency, Expected Sample Size, Expected Sample Size Proportion, Percentage of the overall sample saved, and the Probability of a voiding the second sample had been derived in order to study the behavior of the proposed estimator. It has resulted in this study the numerical results and conclusions of the expression listed above introduced by simulating some of the constants contained in those expression by using (Mathcad) program and the results were put in tables at the end of each chapter.some of the comparisons were made between the obtained results with each of them and also with the classical estimator (MLE) and with previously estimator proposed by some researchers using some established indicators such as the relative Efficiency and Bias Ratio. the results concluded that the pretest single and double stage shrinkage estimators , as well as the pretest single and double stage Bayesian shrinkage estimators is the best in terms of the Relative Efficiency and the Bias Ratio of the classical (MLE) and Previously estimators proposed by some researchers .
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: العربية
الجامعة: جامعة بغداد
الدرجة: ماجستير
الموضوع الدقيق: الرياضيات
السنة: 2017
الموضوع العام: علوم الرياضيات
اسم المشرف: عباس نجم سلمان
اسم المؤلف: رنا عبد الحميد هادي

استخدام التقنية شبه التحليلية في حل مسائل القيم الذاتية متعددة المعلمات

المستخلص: This thesis is concerned with a semi - analytic technique to find the solution of two parameters, quadratic and MPEVPs for ODE.The technique finds the two parameters, quadratic, multi parameter eigenvalue and the corresponding nonzero eigenvector which represent the solution of the problems in a certain domain.Illustration examples is presented, which provided to demonstrate the efficiency and accuracy of the proposed technique where the suggested solution compared with other methods. Many applications in mathematical physics and electromagnetic or elastic wave equations, chemical reaction theory and nanotechnology such as Mathieu differential equation are solved.Also, we give an observations for control of error, control of residual and we proposed a new formula developed to estimate the error which help to reduces the accounts processes and improve the results are improved.The existing code bvpsuite designed for the estimate the error of solution of boundary value problems was extended by a model for the computation the estimate error for the solution of the problems in thesis
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الجامعة: جامعة بغداد
الدرجة: ماجستير
الموضوع الدقيق: الرياضيات
السنة: 2015
الموضوع العام: علوم الرياضيات
اسم المشرف: لمى ناجي محمد توفيق
اسم المؤلف: دعاء رحيم عبود

اعلى قيد حاد لدالة

المستخلص: الهدف من هذة الرسالة هوايجاد اعلئ قيد حاد للدالة الضربية n))σعندما تمثيل مجموعة القواسم الموجبة من n ,n اكبر وتساوي واحد. استخدام دوال اخرئ في نظرية الاعداد منها دالة اويلر n))φ ,والدوال (n)τ , n))ω و(n)μ والتي تدخل في حساب اعلئ قيد للدالةσ(n) يتطلب جهدراياضيا تحليليا لاستكمال البحث واظهاره بالمستوئ المطلوب. | The aim of this thesis, is to search for finding sharper bound of the multiplicative function σ(n),where σ(n) represent the sum of all positive divisors of n , n ≥1. This work required wide concepts in number theory related to the functions ⱷ(n), τ(n), ω(n),and μ(n). These functions involved in our research and explained throughout, the work.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
الموضوع الدقيق: الرياضيات
السنة: 2015
الموضوع العام: علوم الرياضيات
اسم المشرف: سعد عبود بداي الساعدي
اسم المؤلف: خلود منصور حسين علي الجعفري

تقدير معالم تعميم معكوس التوزيع الاسي بالضبابية Estimating the Parameters of Generalized Inverted Exponential Distribution with Fuzziness

المستخلص: يعد معكوس التوزيع الاسي المعمم من التوزيعات المهمة في دراسة اوقات الفشل والتي لها تطبيقات واسعة في المجالات الطبية والصناعية. وفي هذه الرسالة تم تقدير معلمتي الشكل والقياس لهذا التوزيع ولكن بعد ازالة الضبابية التي تتصف بها بياناته اذ ان بياناته عبارة عن اعداد ضبابية ثلاثية ولتحويلها الى اعداد اعتيادية تم استعمال دالة الرتب والتي تم تعريفها وايضاح خصائصها واقتراح تعميم لطريقتين من طرائقها(graded mean and centroid ) وايجاد العلاقة بين الطريقتين المعممتين واثبات هذه العلاقة من خلال تطبيق خمس حالات خاصة منهما وهذه الحالات تعد الاكثر شيوعا في ازالة الضبابية.تم تقدير معلمتي هذا التوزيع وفق ثلاث طرائق وهي، طريقة الامكان الاعظم، طريقة المربعات الصغرى، والطريقة البيزية، وبما ان التوزيع المدروس ذو معلمتين فكان من الصعوبة الفصل بين المعلمتين وتقديرهما بشكل مباشر في كل من طريقتي الامكان الاعظم والمربعات الصغرى. لذا تم الاستعانة بطريقة نيوتن رافسون التكرارية من خلال فرض قيم اولية ومن ثم التقدير الى ان تم الحصول على اقل فرق ممكن بين التقديرين الحالي والسابق لكلا المعلمتين. اما في الطريقة البيزية فقد تم فرض توزيع كاما كتوزيع اولي لمعلمتيه ومن ثم استعمال دالة الخسارة التربيعية وبالاعتماد على خوارزمية Metropolis - Hastingالتي تتطلب تحديد توزيعين (توزيع توليد اولي، وتوزيع مقترح) لايجاد مقدرات بيز لكلا المعلمتين بعد 5000 دورة للتجربة الواحدة. وتم توليد عينات مختلفة لتمثل المجتمع المدروس وفق معكوس دالة الاحتمال التراكمي بالاعتماد على اسلوب المحاكاة. وبعد تقدير معلمتي التوزيع ومقارنة نتائج طرائق التقدير وفق مقياس متوسط مربعات الخطا. تم التوصل الى ان افضل طريقة كانت طريقة الامكان الاعظم تليها الطريقة البيزية واخرها طريقة المربعات الصغرى والتي كانت الابطا من ناحية الحصول على نتائج مستقرة. | The generalized inverted exponential distribution is considered as one of the most important distributions in studying failure times and has a wide application in medical and industrial fields. In this thesis, a shape and a scale parameters of the distribution have been estimated after removing the fuzziness that characterizes its data because they are triangular fuzzy numbers. To convert the fuzzy data to crisp data the researcher has used the ranking function methods to define and clarify their characteristics. She also has proposed a generalization of two methods (graded mean and centroid) and found a relationship between them; this relationship has been proved through applying five special cases of them that are considered the most common cases in fuzziness removal.The distribution parameters have been estimated according to three estimation methods : maximum likelihood, ordinary least squares and Bayesian methods. Hence the studied distribution has two parameters which show a difficulty in separating and estimating them directly in both of the MLE and OLS methods. The Newton - Raphson iteration method has been used by assuming initial values, and then estimating them reach the minimum possible difference between the current and previous values. For the Bayesian method, the gamma distribution has been proposed as a prior distribution for the two parameters with a quadratic loss function by using Metropolis - Hasting algorithm that requires specifying two distributions (random generating distribution and proposal distribution) to find the parameters Bayesian estimators after 5000 iterations for each experiment.Different samples have been generated according to the inverted cumulative distribution function to represent the population under study by using simulation approach. After estimating the parameters, the results of the three methods have been compared according to the Mean Squared Error measurement. And the researcher concluded that the best estimation method is the MLE followed by the Bayesian, and lastly is the OLS which is the slowest even in getting stationary results.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
الموضوع الدقيق: المجموعات الضبابية
السنة: 2016
الموضوع العام: علوم الرياضيات
اسم المشرف: قتيبة نبيل نايف القزاز
اسم المؤلف: حوراء جواد كاظم علي

التذبذب والسلوك المحاذي لحلول المعادلات التفاضلية التكاملية المحايدة من الرتبة الاولى والثانية Oscillation and Asymptotic Behavior of Solutions of First and Second Order Neutral Integro - Differential Equations

المستخلص: الهدف من هذه الرسالة هو تعميم وتوسيع للنتائج التي توصل اليها (olach) في بحثه الذي نشره سنة (2005), حيث انه قد درس وجود حل موجب وكذلك درس تذبذب كل حلول المعادلة التفاضلية التكاملية التباطؤية, وقد استخرج بعض الشروط الضرورية والكافية لضمان تذبذب حلول المعادلة التفاضلية التكاملية التباطؤية. في هذه الرسالة تمت دراسة المعادلة التفاضلية التكاملية المحايدة من الرتبة الاولى, حيث اننا صنفنا فيها المعادلة التفاضلية التكاملية المحايدة الى اربعة انواع, وقد تم استخراج شروط ضرورية وكافية لضمان تذبذب حلول هذه المعادلات, وكذلك شروط ضرورية وكافية اخرى لضمان تقارب جميع الحلول لهذه المعادلات الى الصفر او تباعدها. بالاضافة الى ذلك, اربعة انماط من المعادلات التفاضلية التكاملية المحايدة من الرتبة الثانية قد تمت دراستها, وقد تم استخراج شروط ضرورية وكافية لضمان تذبذب حلول هذه المعادلات, وكذلك شروط شروط ضرورية وكافية اخرى لضمان تقارب جميع الحلول لهذه المعادلات الى الصفر او تباعدها. وقد تم عرض بعض الامثلة لتوضيح النتائج التي تم الحصول عليها. | The aim of this thesis, is to generalized and extended the results of the paper : Olach (2005)[24]. Where he study the existence of positive solution and the oscillation of all solution of delay integro - differential equation, where he extracted some necessary and sufficient conditions to grantee the oscillation of all solutions of delay integro - differential equation. In this thesis, it has been studied neutral integro - differential equation of the first order, where we classify four types of neutral integro - differential equation and extracted necessary and sufficient conditions for these types to ensure the oscillation and the convergence to zero or divergence for all solutions of these equations. Moreover, four types of neutral integro - differential equations of the second order has been studied and obtained some necessary and sufficient conditions to ensure the oscillation of all solutions to this equation, and another necessary and sufficient conditions obtained for all solutions to converge to zero or diverge as t tends to infinity. Some examples are included to illustrate the obtained results.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
الموضوع الدقيق: المعادلات التفاضلية
السنة: 2016
الموضوع العام: علوم الرياضيات
اسم المشرف: حسين علي محمد
اسم المؤلف: تغريد حسين عبد

حل مشكلة النقل الضبابية باستخدام دالة الرتب مع درجة العضوية المثلثية Solving Fuzzy Transportation Problem by Using Ranking Function with Triangular Membership

المستخلص: في هذا الرسالة تم دراسة مشكلة النقل الضبابية التي تكون فيها كلفة النقل وكمية الطلب والعرض هي اعداد ضبابية وان دالة الانتماء المستخدمة لايجاد الاعداد الضبابية هي الدالة المثلثية.في هذا الرسالة تم استخدام العديد من الخوارزميات بالاضافة الى اقتراح خوارزميتين جديدتين تعتمدان على دالة Yager لازالة الضبابية من مشكلة النقل.وقد تم استخدام الامثلة العددية والبيانات الحقيقية لاظهار مدى كفاءة جميع الخوارزميات المستخدمة في الرسالة والمقارنة بينهما,حيث تم حل مشكلة النقل الهشه ((crisp باستخدام خوارزمية فوجل بالاضافة الى الطريقة المعدلة (Modified distribution) وتم التاكد من الحل باستخدام برنامج (Win.QSB) اخيرا، تم تطبيق خوارزميات الحل المستخدمة في الرسالة على مشكلة نقل حقيقيه والتي تم الحصول على بياناتها من شركة توزيع المنتجات النفطية والمقارنه بين خوارزميات الحل من خلال تقليل الكلف وتم ايجاد نتائج هذة المشكلة . | In this thesis fuzzy transportation problem in which the cost of transportation and the amount of demand and supply are fuzzy numbers studied and that the membership function is used to find the fuzzy numbers are triangular membership function. Many algorithms have studied and proposed two algorithms have been used depending on proposed ranking function to remove fuzziness solution of fuzzy transportation problem. A numerical example and real data are used to show the efficiency of all these algorithms which used in this thesis with respect to the Vogel's algorithm with modified distribution and sure the solution by (WinQSB). Finally, during the application of algorithms solution we studied the problem of the transfer of real whose data was obtained from Oil Products Distribution Company. Comparison between algorithms solution has been organized by minimizing costs and the results of this problem have been achieved
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الجامعة: جامعة بغداد
الدرجة: ماجستير
الموضوع الدقيق: الرياضيات
السنة: 2015
الموضوع العام: علوم الرياضيات
اسم المشرف: ايدن حسن حسين الكناني عبد الرحيم خلف الحارثي
اسم المؤلف: انفال حسن ذياب

بعض انواع من المقاسات المنضغطه والمنكمشه Some types of Retractable and Compressible Modules

المستخلص: لتكن R حلقة ابداليه ذات عنصر محايد, ولتكن M وN مقاسات يساريه احاديه على R. ولتكن〖Hom〗_R (M,N) مجموعة كل التشاكلات المقاسية من M الى N. من المعروف ان خواص وتمييزات 〖Hom〗_R (M,N) كمقاس على R ممكن ان تحدد عن طريق خواص وتمييزات R, M وN وكذلك بعض خواص وتمييزات R, M وN ممكن ان تحدد عن طريق خواص وتمييزات〖Hom〗_R (M,N), لذا فان العديد من الباحثين اهتموا بدراسة 〖Hom〗_R (M,N) . بعض الدراسات تركزت حول استخدام خاصية 〖Hom〗_R (M,N)≠0 لكل مقاس جزئي N غير صفري من M في هذه الحاله يطلق على M بانه مقاس المنكمشة, بينما اذا كان كل مقاس جزئي غير صفري من M يحوي على نسخة لـ M بمعنى انه يوجد تشاكل متباين في مجموعة 〖Hom〗_R (M,N) فيطلق على M بانه مقاس منضغط, من الواضح ان صنف المقاسات المنضغطه محتوات فعليا في صنف المقاسات المنكمشة. في هذا العمل سوف نعطي دراسة مفصلة حول المقاسات المنضغطه الصغيرة والمقاسات المنكمشة الصغيرة, فضلا على ذلك، اعمامات اخرى للمقاسات المنضغطه والمقاسات المنكمشة تم تقديمها ودراستها مثل المقاسات المنضغطه النقية والمقاسات المنكمشة النقيه, واخيرا المقاسات
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الجامعة: جامعة بغداد
الدرجة: ماجستير
الموضوع الدقيق: الرياضيات
السنة: 2016
الموضوع العام: علوم الرياضيات
اسم المشرف: ليلى سلمان محمود
اسم المؤلف: اسراء حسن مسلم

العلامات الاحيائية لنفط تكوين الزبير ومناشئه في مدينة البصرة جنوب العراق Biomarkers of Zubair Formation Oil andits Sources in Basrah Region Southern Iraq

المستخلص: In this thesis, Zubair Formation is studied for its lithological properties, oil accumulation, and source rocks potentiality by : One dimension petroleum - system models were developed to simulate burial - thermal history, source rock maturity and the timing and extent of petroleum generation; the generation of Zubair Formation oil began in the Tertiary and continued till present day. Modeled transformation ratios indicate that 53 - 75% of its generation potential has been reached. In contrast, younger source rocks are immature to early mature (<20% generation), whereas older source rocks are mature to over mature with 100% generation.The study of (14) thin section of core samples, showed that Zubair Formation has good reservoir properties of 19 - 28% porosity and 80 to 500 md permeability.Palynological analysis of (15) slides from core and cutting samples represent the organic matter of the shale in the Zubair Formation is mature, kerogen type II, III according Van Krevlen diagram.Gas chromatography - mass spectrometry devise of two oil samples represent the alkane peaks of carbon in oil, bulk composition of oil, the ratios of biomarkers, and non - biomarkers. These could indicate that source rocks for this oil are carbonate (Sulaiy - Yammama Formation) deposited in reduced marine environment and mature kerogen type II with algae origin with source rock age is Upper Jurassic - Lower Cretaceous.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الجامعة: جامعة بغداد
الدرجة: ماجستير
الموضوع الدقيق: علم الارض
السنة: 2009
الموضوع العام: علم الارض
اسم المؤلف: هبة عادل ذيبان الحيدري

دراسة صدع بيخير - اشكفت وتاثيره على عمليات الطي في شمال غرب العراق Bakhair - Ishkaft Fault and its Influence on Folding Process in North West Iraq

المستخلص: تقع منطقة الدراسة شمال غرب العراق في الجزء الشمالي من الصفيحة العربية وضمن نطاق زاكروس الجبلي . تناول البحث دراسة تركيبية مفصلة لصدع بيخير - اشكفت الذي تم تحديد خواصه التركيبية وامتداداته لاول مرة وتاثيره على الطيات المحدبة في منطقة الدراسة والتي تشمل طية بيخير شمالا، عين زالة، بطمة، كصير، اشكفت واخيرا طية ساسان جنوبا، كما تم دراسة مورفوتكتونية منطقة الصدع وذلك من خلال تفسير الصور الجوية ورسم الخريطة المورفوتكتونية لغرض تحديد تاثير الوضع التركيبي على تطور الاشكال الارضية وشبكات التصريف المائية وتبين وجود ستة وحدات جيومورفولوجية في منطقة الدراسة . شملت الدراسة تصنيف هندسي للطيات بالاعتماد على قيمة زواياها الداخلية وعلى النسبة بين اطوالها المحورية الى عرضها واتضح ان معظمها من النوع المعتدل القصير وهي تمتد باتجاه محوري شرق - غرب بشكل عام يقطعها صدع مضربي اقليمي (صدع بيخير - اشكفت) ذو ازاحة يسارية مؤديا الى حدوث ازاحة (انقطاع) وتغيرات تركيبية في الشكل الهندسي لهذه الطيات، كما تم تصنيف الكسور النظامية الثانوية في المنطقة الى مجموعتين من الكسور الشدية واربعة انظمة من الكسور القصية جميعها تكونت تحت تاثير نفس القوى التكتونية المسببة لعمليات الطي والتصدع في المنطقة . قسمت الطيات في منطقة الدراسة الى نوعين الاول هو الطيات الانضغاطية البسيطة والثاني هو الطيات المصاحبة لتقدم الصدوع وقد تكونت جميعها في اواخر العصر الثلاثي نتيجة لضغط اقليمي افقي باتجاه شمال - جنوب ، وقد انجز الطي بفعل ميكانيكيتين هما ميكانيكية السطح المتعادل وميكانيكية الانزلاق الانثنائي . تبين من دراسة صدع بيخير - اشكفت المضربي والطيات المتاثرة به ان العلاقة الزمنية بين نمو الطيات والتصدع تختلف من منطقة الى اخرى اعتمادا على قربها وبعدها من حافة الصفيحة العربية . | The study area is located in the northwestern part of Iraq within the Zagros Folded belt of the northern part of the Arabian Plate .A detalied structural study and analysis of the area is carried out . The study includes the identification of a regional left lateral strike - slip fault (named Bakhair - Ishkaft fault) . The influence of the fault on the folds as well as its impact on the morphotectonic picture of the area has been discussed and analysied . Based on the amount of the interlimb angle and length to width ratio, most of the east - west trending folds of the area fall within the gentle - brachy category .Genetically, the folds are subdivided into two classes; the first is simple buckle folds developed by a combination of flexural slip and neutral surface folding mechanisms and the second class is compressional fault propagation fold . The folding of the area is directly related to the Late Tertiary compression . Bakhair - Ishkaft strike - slip fault dislocate some folds of the area with a left - lateral displacement and change of the style of the others .The present study revealed that the faulting and the folding occurred under the same stress field, but their time of initiation and growth were largely controlled by their relative position with respect to the Arabian Plate margin
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: العربية
الجامعة: جامعة بغداد
الدرجة: ماجستير
الموضوع الدقيق: علم الارض
السنة: 2004
الموضوع العام: علم الارض
اسم المشرف: منال شاكر الكبيسي صفاء الدين فخري فؤاد
اسم المؤلف: هالة عطاء الموسوي

دراسة بيتروغرافية وجيوكيميائية واصل تمعدنات النحاس - حديد والصخور المرافقة في منطقة (واراز) محافظة السليمانية /شمال شرق العراق Petrography, Geochemistry and Genesis of Copper - Iron Mineralization and Associated Rocks in Waraz Area, Sulaimanya, NE Iraq

المستخلص: تمثل منطقة واراز الواقعة في الجزء الشمالي الشرقي من العراق ضمن معقد افيولايت ماوات.وقد ركز البحث الحالي على دراسة تمعدنات النحاس والصخور الحاضنة للنحاس في منطقة واراز.تم تقديم خارطة جيولوجية مفصلة للمنطقة في هذه الدراسة, حيث تم فيها تحديد عشر وحدات وهي بسلت وهورنبلند بايروكسينايت وسليت واندسايت وبونينايت وديورايت ودسايت وكابرو وئبيدوسايت وعروق الكوارتز. ولقد حددنا نوعين من التشققات الرايديال والسكيموتون في منطقة الدراسة وقد تم قياس كل منها ايضا. ان وجود هذين النوعين من التشققات يدل ان منطقة الدراسة هي قص ( Shear ). من خلال دراسة 170 شريحة تبين الى ان النماذج الصخرية تعرضت الى التحلل والتحول بدرجات متباينة واحتفظت بشكل عام على معدنية ونسيجة الاصلي. من خلال دراسة الشرائح ال (170) المذكورة اعلاه , حددنا المكونات الرئيسية للصخور فوق القاعدية وهذه المكونات هي كلاينوبايروكسين وهورنبلند واولفين وئورثوبايروكسين, وكذالك للصخور القاعدية هي كلاينوبايروكسين وكالسيك بلاجيوكليس واولفين , بينما في الصخور المتوسطة وجدنا ان المكونات الرئيسية هي بلاجيوكليس وكوارتز, ووجدنا ان المكونات الرئيسية للصخور الحامضية هي كوارتز وبلاجيوكليس.تبين من خلال دراسة شرائح صقلية بان الصخور الدراسة الحالية تحتوى على نوعين من التمعدنات وهما كبريتات واكاسيد, وتبين انهما تعرضت للتحلل وانتج من خلالها معادن ثانوية.اعتمادا على المعدنية والدلائل الجيوكيميائية هناك نوعين من التمعدنات حسب المنشا׃ - الاولى التجمعات الصهيرية واللتي تكون اصلية المنشا ,والثانية هي الحرمائية اللتي تكون لاحقة المنشا.تم اختيار تسعة عشر نموذج صخري للتحليل الكيميائي باستخدام تقنيةICP .تبينت ان الغالبية الصخور الدراسة تحتوي على محتوى تيتانيوم واطيء متمثلة بصخور اجلزر القوسية بينما احتوى بعضها على محتوى تيتانيوم واطيء جدا متمثلة بصخوربونينايت.وتمتاز تلك الانواع من الصخورباغتنائها لعناصر LILE وافتقارها لعناصر HFSE وعناصر ارضية نادرة.اعتمادا على دراسة عناصر ارضية نادرة ان الصخور انتجت من( garnet free source mantle ) وان هذة الصخور نتجت عن تبلور تجزئي لصهير البزلتي ناتج عن انصهار جزئي لجبة مستنزفة ,وان نسبة الانصهار الجزئي حوالي ( 20% - 40%). | This study deals with the petrography, mineralogy, geochemistry, and genesis of the copper - iron mineralization and associated rocks in the Waraz area. An area of about 2 km2 is selected within the Zagros Suture Zone north - east of Iraq. A detailed geological map of the area is presented in the sequel of the thesis, in which 10 units has been determined, basalts, hornblende pyroxenite, slate, andesite, boninite, diorite, dacite, gabbro, epidosite, quartz vein. In the field determined two types of fractures riedal and skempton each being measured as well. The presence of these two types of fractures witnesses that the study field is shear. The study of (170) thin sections revealed that the rocks of the area were subjected to alteration and metamorphism in various degrees while in general, preserving their original mineralogy and texture. Throughout the study of the above mentioned (170) thin sections, we have determined the major minerals of ultrbasic rocks which are clinopyroxene, hornblend, olivine and orthopyroxene. That of basic ones is clinopyroxene, calcic plagioclase and olivine, that of intermediate ones are plagioclase and quartz, and that of acidic ones are quartz and plagioclase. The polished sections (35 sections) witnesses that there are two main types of mineralization; sulfides and oxides, most of which were subjected to alteration producing secondary minerals. Depending on mineralogical and geochemical evidences, the genesis of the sulfides and oxides is concluded to be of two types : magmatic segregation which is categorized to be syngenetic and hydrothermal processes which is categorized to be epigenetic. Nineteen rock samples were selected to test for geochemical analysis using ICP technique (inductive couple plasma) which establishes that the rocks contain a little amount of TiO2 that represents island arc tholeiite rocks while some of the samples contain a very little amount of TiO2 that represents Boninite rocks. The samples are characterized by enrichment in large ion lithophilic elements and depletion in high field strength elements (HFSE) as well as depletion in rare earth elements (REE). Accordingly the study area is supra subduction zone. Based on the study of the REE, concluded that the rocks return to a unique mantle source which is garnet free mantle source. The rocks are formed due to fractional crystallization of a basaltic magma emerged as a consequence of the partial melting of a depleted mantle, ranges between % 20 - 40.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الجامعة: جامعة بغداد
الدرجة: ماجستير
الموضوع الدقيق: علم الارض
السنة: 2007
الموضوع العام: علم الارض
اسم المشرف: ايتن هادي علي رضا خلدون صبحي البصام
اسم المؤلف: عرفان عمر موسى

دراسة السرع الزلزالية باستخدام الموجات فوق الصوتية لبعض الخواص الجيوتكنيكية لمقالع الحجر الجيري في محافظة السليمانية STUDY OF SEISMIC VELOCITIES USING ULRTRASONIC WAVES FOR SOME GEOTECHNICAL PROPERTIES IN LIMESTONE QUARRIES SULAIMANIA - PROVINCE

المستخلص: دراسة الخواص الجيوتكنيكية بواسطة استخدام السرع الزلزالية لصخور الحجر الجيري المستعمل في صناعة السمنت لثلاثة مواقع مختارة في محافظة السليمانية وهي : (سرجنار وطاسلوجة وبازيان)، جمعت النماذج الصخرية وعددها (30) نموذجا لكل موقع، وقطعت بشكل مكعب لمعرفة خاصية التماثل، استخدم جهاز الموجات فوق الصوتية لقياس السرعة الطولية والقصية وبثلاثة اتجاهات، وكانت السرعة الطولية للموقع الاول تتراوح بين (6287.9 4522.5 - ) م\ثا ,والسرعة القصية تتراوح بين 2344.6 - 3446.9)) م\ثا. اما في الموقع الثاني فكانت السرعة الطولية تتراوح بين (5620.6 - 3925.5) م\ثا، والسرعة القصية تتراوح بين ( - 2802.1 2231.8) م\ثا. بينما في الموقع الثالث السرعة الطولية تتراوح بين (4803.4 - 4059.2) م\ثا، والسرعة القصية تراوحت بين (2658 - 2072.1) م\ثا، فضلا عن قياس الكثافة لجميع النماذج. وتم حساب معاملات المرونة الديناميكية المختلفة (E, K, σ, μ, λ, Z, Im, ko, ф, Ip) لكل موقع وكانت قيمة كل معامل تتراوح على النحو الاتي : (34GPa (E=56 - و(K=42.6 - 31.4GPa) و(0.32 ــ0.31=σ) و(μ=18.4 - 13.3GPa) و(λ=31 - 22.5GPa) و(z=1294x10³ - 1115x10³kg/m².sec) و(Im=[ - 0.242] - [ - 0.27]) و(ko=0.465 - 0.452)و(ф=33 - 32)و(Ip=9.4 - 7.4) فضلا عن قياس المسامية بوساطة الاجهزة المتوافرة في قسم هندسة النفط وبلغت اقل قيمة لها في الموقع الاول (2.4%) والموقع الثاني (3.8%)، واعلى قيمة في الموقع الثالث (6.19%). وتم التوصل الى العديد من العلاقات التي تربط بين السرع الزلزالية ومعاملات المرونة المختلفة، وتم حساب معامل يونك السكوني Static لـ (9) نماذج وكانت قيمته تتراوح بين (1.2 - 13GPa)، وبعد اشباع النماذج بالماء لوحظ انخفاض السرع الزلزالية وبنسبة (21%) للسرعة الطولية والقصية في الموقع الاول على التوالي. اما في الموقع الثاني فكانت نسبة الاختلاف (3%) للسرعة الطولية والقصية، بينما في الموقع الثالث فان السرع تزداد لمعظم النماذج عند تشبيعها بالماء بمقدار (%5.5) للموجتين الطولية والقصية. | Using seismic velocities to study of the geotechnical properties forlimestone rock used in cement industry for three sites selected in the province of Sulaymaniyah are (Sarchinar, Tasloja, Bazian), 30 samples were collected in each site, each sample cut as cubic shape for studying the isotropy, using Ultrasonic wave for measuring the velocity of longitudinal and shear waves in three dimensions. The velocity of Vp for the first site ranges between (6287.9 - 4522.5) m/sec were the velocity of Vs ranges between ( 2344.6 - 3446.9) m/sec but at the second site velocity of Vp was ranges between (5620.6 - 3925.5) m/sec and velocity of Vs ranges between (2802.1 - 2231.8) m/sec ,while at the third site the velocity of Vp ranges between (4803.4 - 4059.2) m/sec, and velocity of Vs ranges between (2658 - 2072.1), m/sec, as well as measuring of the densities of all sample were calculated to get the dynamic elastic properties (E, K, σ, μ, λ, Z, Im , ko, ф, Ip) for each site and the average were as follows : (E=56 - 34GPa),(K=42.6 - 31.4GPa),(σ=0.31 - 0.32),(μ=18.4 - 13.3GPa), (λ=31 - 22.5GPa),(z=1294x10³ - 1115x10³kg/m².sec),(Im=[ - 0.242] - [ - 0.27]), (ko=0.465 - 0.452) ,(ф=33 - 32),(Ip=9.4 - 7.45), the porosities of all samples in three sites were measuring in petroleum department, engineering collage was in the first site (2.4%) and the highest value was in the third site (6.19%) many mathematical relationship were calculated between the velocities and elastic modules also static Young's module were calculated for (9) sample and the value of it ranges between (1.2 - 13 GPa). The saturated samples velocities show deceasing in seismic velocities (21%) in the first site, (3%) in the second site and about (5.5%) in the third site.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الجامعة: جامعة بغداد
الدرجة: ماجستير
الموضوع الدقيق: علم الارض
السنة: 2009
الموضوع العام: علم الارض
اسم المشرف: سلمان زين العابدين خورشيد
اسم المؤلف: حسن علي هاشم

تاثير اضافة مادة البايركس على بعض الخصائص الفيزيائية لمادة البورسيلن Influence of Pyrex Addition on Some Physical Properties of Porcelain Material

المستخلص: This study was carried out to prepare a porcelain samples of raw material 50 wt % kaolin dukhla, 25 wt % erzma sand glass and 25 wt% feldspar, boro silicate glass (Pyrex) used as a flux in the porcelain (ceramic) body, instead of feldspar, yielding a new material which has new properties with grain size equal to 53μ.Pyrex which was added to the porcelain to get the mixtures of sample. The all mixtures prepared and 10 wt % of distilled water was added, the resulting blends were die pressed of 25 MPa, to produce specimens with diameter of 25 mm and thickness of 5 mm, then they were dried and sintered for different temperatures (1200, 1250, and 1300) C° for 1 hour in an electric furnace. Physical properties measurements such as density, porosity, water absorption and length shrinkage percentage, were carried out, also mechanical properties (compression strength) and thermal properties. (Thermal conductivity and heat capacity) were measured The result of the physical properties measurement are found to be improved at increasing the ratio of Pyrex mixture, such as increase in density and shrinkage which a company with the decrease of porosity and water absorption, also the same changes were happened for these properties with increasing sintering temperature for all mixtures, and the highest increment in shrinkage have been shown at 1250 C°.The thermal conductivity and heat capacity have increased the ratio of Pyrex mixture, and there are small increment in these measurements, at increasing temperature for mixtures 3 and 4, but the increment is high for mixture no. (2).The results of mechanical properties measurements (diametrical strength) are found to be improved and increased at the increase of the ratio of Pyrex mixture and the mixture no. (3) have a highest strength. Also this improvement and increment in strength was continued for mixtures 2 and 3, with the increase of the sintering temperature whereas decreases for mixture (4) improvement in physical and mechanical properties for a new porcelain make suit usage in brick walls industry (porcelain tiles).
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: كريم علي جاسم سوسن عبد الحسين مهدي
اسم المؤلف: عمر عدنان جاسم

تاثير اضافة Al2O على الخصائص الكهربائية للفارستور من نوع ZnO The Effect of (Al2O3) Additive on Electrical Properties of (ZnO) - Based Varistor

المستخلص: ZnO based varistor samples having composition formela as shown below : - (X) is a variable take values (X = 0 , 0.1 , 0.5 , 1) % mol were prepared by a solid state reaction and sintered in air at a different sintering temperatures (1000,1100 and 1200)ᴼC for 2h by a heating rate of (5ᴼC. min - 1). The microstructure and electrical properties of sintered samples were investigated by using X - ray diffraction (XRD), energy dispersive spectroscopy (EDX), scanning electron microscopy (SEM), as well as electrical meas urements. XRD analyses showed that the crystallite size was decreased with the increase of Al2O3 concentration while it was increased with the increase of sintering temperature. Also from SEM images and by using linear intercept method we note that the grain size decreases with the increase of Al2O3 concentration while it increases with the increase of sintering temperature. Since the breakdown voltage is influenced by the size and the number of grains , so it was increased with the increase of Al2O3 concentration at certain sintering temperature to reach (2220V) at sample contains (1% of Al2O3) and sintered at 1000ᴼC for 2h, this is due to form a spinal phase (ZnAl2O4) which inhibits the grain growth.Also the breakdown voltage was decreased with the increase of sintering temperature at certain Al2O3 concentration to reach (255V) at sample sintered at 1200ᴼC for 2h and contains (0.1% l of Al2O3).By plotting the (J - E) curves of varistor samples we can notes that the adding of (0.1 and 0.5) % of Al2O3 dopants enhances the nonlinear behavior of ZnO varistor by increasing the nonlinear coefficient to reach its maximum values (46, 48) respectively which are sintered at 1000ᴼC for 2h, while the increase of Al2O3 concentration to(1% ) decreases the nonlinear coefficient to (29.2) which are sintered at 1000ᴼC for 2h .Compound ZnO Bi2O3 Sb2O3 CoO MnO2 Cr2O3 Al2O3 % mol 96.5 - X 0.7 1 0.8 0.5 0.5 X The increase of sintering temperature decreases the nonlinear coefficient to reach its minimum values (6.9, 8) at samples sintered at 1200ᴼC for 2h and contain a different amounts of Al2O3 concentration, this is due to the bad volatilization of bismuth that insured by (EDX) test.The leakage current was increased with the increase of both Al2O3 concentration and sintering temperature to reach its maximum value (0.33mA) at a sample which contains (1% ) of Al2O3 concentration and sintered at 1200ᴼC for 2h, that is because the Aluminum increases the free electrons (donor density ) at the conduction band.Deilectric constant decreases with the increase of the frequancy of the applied voltage for the samples which containe 0.1% of Al2O3 and sintered at (1000 and 1200)ᴼC for 2h and for the sample contain 1% of Al2O3 and sintered at 1000ᴼC, the deilectric constant decreases with the increase of sintering temperature while tangent factor increases with the increase of Al2O3 concentration, this is due to the increase of leakage current.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: ايسر جمعة ابراهيم
اسم المؤلف: عباس فاضل شنون

دراسة نظريه للاستطارة الالكترونيت للنوى 59Co, 61Ni, 63Cu , 65Cu Theoretical Study of Electron scattering from 59Co, 61Ni, 63Cu and 65Cu nuclei

المستخلص: The nucleon momentum distributions NMD and the elastic longitudinal form factors F(q) for the electron scattering of the ground state for some odd mass nuclei in the 1f - 2p shell, such as 59Co, 61Ni, 63Cu and 65Cu have been derived and calculated by using the Coherent Density Fluctuation Model CDFM and expressed in terms of the fluctuation function (weight function)| . The fluctuation function has been related to the nucleon density distributions NDD of the nuclei and determined from the theoretical and the experimental results. The property of the long - tail manner at the high momentum region of the nucleon momentum distributions has been obtained by both the theoretical and experimental fluctuation functions on contrary to the results of the nucleon momentum distributions derived and calculated in the shell model by taking Fourier transform to the harmonic - oscillator wave functions that are mainly characterized by the steep slope behavior at high momentum values. The experimental form factors of all nuclei under study are in reasonable reproduced by the present calculations for all the values of momentum transfer .
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الجامعة: جامعة بغداد
الدرجة: ماجستير
الموضوع الدقيق: فيزياء الالكترونيات
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: الطاف عبد المجيد الرحماني
اسم المؤلف: ياسمين حسن كاظم

السليكون العشوائي للثنائي الباعث للضوء من النقاط الكميه Amorphous silicon Light Emitting Diode Quantum Dots

المستخلص: في هذه الدراسة استخدمت الحسابات النظرية لنبيطة ثنائي الباعث للضوء للنقاط الكميه من السيليكون العشوائي. وعن طريق هذه الحسابات فقد تبنينا فكرة التقيد الكمي. وقد وجد ان الانبعاث الكمي الضوئي يظهر اعتمادا مهما لحجم النقاط الكمية والتي تتراوح من (١ - ٤) نانومتر. ان الكفاءة الكمية الداخلية تتاثر بدرجة الحرارة حيث تكون اكثر كفاءة عند درجة حرارة الغرفة. يمكن لفجوة الطاقة ان تتناغم وفقا للتحكم بحجم النقاط الكمية من السليكون العشوائي. وقد اظهرت النتائج الازاحة نحو الطاقا العاليه في تاثير حالة التقييد الكمي, لهيكل النقاط الكمية للسيليكون العشوائي. وهذا التقييد الكمي يجعل السليكون مرشح للعرض بكامل الوان الطيف البصري. مما يقودنا هذا السلوك البصري الى تفسير تغير مادة النقاط الكمية للسيليكون العشوائي لتصبح مادة ذات فجوة حزمية مباشرة بعد ان كانت غير مباشرة في طبيعتها الحجمية. تمت دراسة الكفاءة الكمية الداخلية بوصفها دالة الى الطول الموجي وتيار الحقن. لقد وجدنا ان النتائج المستحصلة متفقه اتفاقا جيدا مع النتائج التجريبية المنشورة. لذا, فاننا نؤكد على ان مادة النقاط الكمية من السليكون العشوائي هي خيار واعد لنبائط انبعاث الضوء المرئي والقابلة للتناغم الطاقي وذات انجازية عاليه | In this work, theoretical calculations were used by considering the amorphous silicon quantum dots light emitting diode (a - SiQDs LED) as the device of investigation. By these calculations, the effect of quantum confinement was a doped. It is found that the light emission shows significant size dependence in the range (1 - 4) nm of the quantum dots. The internal quantum efficiency is affected by temperature and it is more efficient at room temperature. The energy gap can be tuned by controlling the size of a - SiQDs. The blue shift is attributed to quantum confinement effect in a - SiQDs structure, where quantum confinements make silicon like candidate for full - color display. It led to the interpretation that the a - SiQDs material has been changed to be a direct band gap material. Internal quantum efficiency as a function of wavelength and injection current has been studied. It is found that the obtained results are in good agreement with the experimental published data. Therefore, a - SiQDs material was asserted to be a promising candidate for visible, tunable and high performance light emitting devices.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
الموضوع الدقيق: الفيزياء
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: موفق كاظم عبد الرضا
اسم المؤلف: ولاء خليل جميل خليل

مقارنة نظرية بين HgCdTe وAlGaAs لنظامي البئر الكمي الليزري ذو التركيبين غير المتجانسين Theoretical Comparison between HgCdTe and AlGaAs Heterostructure Quantum Well Laser Systems

المستخلص: هذا البحث يصف مقارنة نظرية بين نظامي ولليزر البئر الكمي ذو التركيب غير المتجانس. حيث تم دراسة تاثير العوامل المختلفة لهذا التركيب مثل عرض البئر وعرض الحاجز للبئر الكمي المفرد والمتعدد على عوامل الليزرمثل عامل التقيد البصري وتيار العتبة وكثافة تيار العتبة والربح البصري وقدرة الخرج والكفاءة . بالاضافة الى دراسة كثافة الحالات للبئر الكمي.افضل قيمة لعامل التقييد البصري (0.308) للتركيب ذو ثلاثة ابار كمية و(W=21.5nm) و(0.0224) للتركيب ذو خمسة ابار كمية و(W=11.3nm). عامل التقيد له تحسن كبير في التركيب المتعدد الابار افضل من التركيب ذو البئر الكمي المفرد . واظهرت النتائج ان عامل التقييد للتركيب المتعدد الابار اكبر منه للبئر الكمي المنفرد بمقدار 18 مرة للتركيب وبمقدار 25 مرة للتركيب . هذا التحقيق لتحسين عمل نبيطة الليزر دايود من خلال تاثير عامل التقييد البصري على الربح وتيار العتبة والقدرة الخارجة والكفاءة تحت الانحياز الامامي في المنطقه الفعالة، كانت كثافة تيار العتبة ووكفاءة (89% ل و97% لـ ) | This work is description of theoretical comparison between two systems and for heterostructure quantum well laser. Where studied the effects of the variation parameters for this structure such as a well width, barrier width for Single and Multi - Quantum Well, on laser parameters such as optical confinement factor, threshold current, threshold current density, optical gain, output power and efficiency. In addition we studied the density of states for quantum well.The optical confinement factor has the best value (0.308) for 3QWs at (W=21.5nm) and (0.0224) for 5QWs at (W=11.3nm). It introduced a significant improvement in MQW is much higher than SQW for two systems. The results showed that optical confinement factor of 3QW are much higher (by a factor 18) for and (by a factor 25) for 5QW, from optical confinement factor of SQW. This investigated for improve the work of laser diode device through the effect of optical confinement factor on the gain, threshold current, output power and efficiency under forward bias in active region, where threshold current density , with efficiency (89%for and 97% for )
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: ابتسام محمد تقي سلمان
اسم المؤلف: وديان كاظم عبد الزبيدي

دراسة نظرية للاستطارة الالكترونية المرنة من بعض النوى الفردية A Theoretical study of Elastic Electron Scattering for some odd nuclei

المستخلص: حسب كــل من توزيع كثافة الشحنة النووية وعوامل التشكل لاستطارة الالكترون المرنة للحالة الارضية للنوى الفردية ( 25Mg , 27Al, 29Si 19F بالاضافة الى 31P) الواقعة ضمن القشرة النووية 2s - 1d بالاعتماد على كل من اعداد الاشغال للحالات النووية والدوال الموجية لجهد المتذبذب التوافقــي ذي معلمات حجمية اختيرت لكي تعيد انتاج جذر مربع متوسط انصاف اقطار الشحنة لجميع النوى. وقد وجد ان ادخال المعلمات الاضافية ( وو ) التي تعكس الفرق بين اعداد الاشغال للحالات النووية قيد الدراسة وبين تلك التي يتنبا بها انموذج القشرة النووية يؤدي الى توافق بين النتائج المحسوبة والنتائج العملية لتوزيع كثافه الشحنة النووية لكل قيم المسافة (r). كما تبين لنا ان عوامل التشكل الطولية لاستطارة الالكترون المرنة النظرية تتفق مع النتائج العملية للنوى (,25Mg , 27Al, 29Si 19F بالاضافة الى 31P) كما تم حساب الفرق بين كثافة الشحنة الالكترونية لكــل من ( 24Mg , 25Mg) و28Si , 29Si)) لتوضيح تاثير اضافــة النيوترونات على كثافة الشحنة النووية لكل من النظائر السابقـــة. | The charge density distributions (CDD) and the elastic electron scattering form factors F(q) of the ground state for some light odd mass nuclei in the 2s - 1d shell , , , and nuclei have been calculated. This has been based on the use of occupation numbers of the states and the single particle wave functions of the harmonic oscillator potential with size parameters that have been chosen to reproduce the observed root mean square charge radii for all considered nuclei. It is found that introducing additional parameters, namely and which reflect the difference of the occupation numbers of the states from the prediction of the simple shell model leads to a remarkable agreement between the calculated and experimental results of the charge density distributions throughout the whole range of (r). The elastic electron scattering form factor throughout all values of momentum transfer are in reasonable agreement with the experimental electron scattering form factors for , , , and nuclei. The difference of the CDD of ( - ) and ( - ) isotopes has been calculated to clarify the influence of the additional neutron on the CDD
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الجامعة: جامعة بغداد
الدرجة: ماجستير
الموضوع الدقيق: فيزياء الالكترونيات
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: الطاف عبد المجيد الرحماني
اسم المؤلف: هدى عبد الجبار حسين

دراسة نظرية لطيف مستويات الطاقة الواطئة ولنوى خفيفة باستعمال انموذج القشرة النووي 3016S14,3014Si16,188Ne10 Theoretical Study Of Low Lying Spectrum For Light Nuclei By Using Nuclear Shell Model 3016S14,3014Si16,188Ne10

المستخلص: ان طاقات الربط والتهيج حسبت لنوى (_8^18)Ne_10 , (_16^30)S_14 , (_14^30)Si_16 وللمستويات الدنيا باستعمال حسابات انموذج القشرة النووي ولبروتونين في القشرة S,dلنوى (_16^30)S_14 بينما لنيوترونين لنواة (_14^30)Si_(16 ) ,(_8^18)Ne_10 ولمدارات خارج القلب المغلق .عناصر مصفوفة التفاعل تم الحصول عليها من خلال استخدام جهد تفاعل USD,USDA ,USDBنتائج الحسابات النظرية لطاقات الربط والتهيج والمحسوبة باستعمال عناصر المصفوفة النظرية اظهرت تطابقا مع النتائج العملية .حسابات انموذج القشرة استعملت لفهم ودراسة خصائص المستويات الدنيا ولعدد الكتلة لنوى A=18,30 .استعمل القلب المغلق مع التفاعل المتبقي للجسمين ما بين النكليونات الخارجية O8816 ,14 14Si28 .لحالات التماثل الموجبة فان جميع التشكيلات لقشرة S,d اخذت بالحساب باعتبار ان هناك قشرة مغلقة مع جسيمين في مستويات القشرة .S,dتفاعل الجسمين الفعال للنوى اختير على اساس جهد USD,USDA,USDB .اظهرت قيم طاقات الربط والتهيج تطابق جيد مع القيم العملية .واعتبرت الجهود USD,USDA,USDB هي المدخلات الاساسية لحساب الطاقات النووية والتي تتضمن تفاعل نكليون - نكليون .الحسابات اظهرت لنا امكانية اكبر لفضاء تفاعل النكليونات كون طاقات الحالات الارضية متقاربة . | Binding and excitation energies have been calculated at low lying levels for (_8^18)Ne_10 , (_16^30)S_14 and (_14^30)Si_16 nuclei using shell - model calculation with two protons in the S - d shell for (_8^18)Ne_10 , and (_16^30)S_14 while two neutrons for (_14^30)Si_16 in orbits outside the closed core. The effective two - body matrix elements are obtained from the USDA, USDB and (USD) potential interaction. Results of calculated binding and excitation energies are show a good agreement with experimental data with calculated by using theoretical matrix elements . The shell model calculation is used to investigate properties of levels at low lying in the mass number of nuclei A =18 and 30. An inert core with a residual two - particle interaction between the outer nucleons of (_8^16)O_8 , and (_14^28)Si_14 as summed. For the positive parity states all configurations in the s - d shell are taken into account are described by a closed shell, two nucleons in the S - d shell . The effective two - particle interaction is chosen to be a described by the USD,USDA ,and USDB potential. Good agreement with experiment is obtained for the binding and excitation energies. It is considered USDA , USDB and USD potential for two - body matrix element interaction as the most input parameters to the calculation is the nuclear energies, which contains realistic two (N - N) interactions. Provided the calculation is performed in a large enough basis space, the ground - state energy will converge
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: هادي جبار مجبل العكيلي
اسم المؤلف: هدى بطرس بهنام مقادسي

تصنيع ودراسة خصائص كاشف ضوئي وخلية شمسية لاغشية CuO الرقيقة Fabrication and Study Properties Photodetector and solar cell CuO Thin film

المستخلص: في هذا البحث , تم تصنيع كاشف ضوئي وخلية شمسية من مادة اوكسيد النحاس CuO)) ثم دراسة خصائصه والمحضرة من ترسيب اغشية (CuO) النقية ,وبسمك مختلف 400,350,300,250) nm) بطريقة التبخير الحراري في الفراغ اذ تم تحضير هذه الاغشية بترسيب معدن النحاس النقي (Cu) على قواعد زجاجية وسيليكونية بدرجة حرارة الغرفة (300)K، ومن ثم اكسدة هذه الاغشية المحضرة بدرجة حرارة (300)ºC لمدة ساعة كاملة بوجود تدفق الهواء. اظهرت نتائج فحوصات حيود الاشعة السينية (XRD) ومجهر القوة الذرية (AFM) ان جميع الاغشية المحضرة من النوع متعدد التبلور وذات اتجاهية (111) , (1 ̅11) ان الحجم الحبيبي متجانس ومنتظم ومعدل خشونة السطح RMS)) يزداد بزيادة السمك . عند اجراء قياسات الخواص البصرية تبين ان لاغشية (CuO) امتصاصية عالية في مدى الاطوال الموجية للمنطقة المرئية nm(700 - 400), ان كلتا قيمتي النفاذية وفجوة الطاقة يتناقصان من (1.8 - 1.4 eV) بالاعتماد على زيادة السمك للاغشية المحضرة.اظهرت القياسات الكهربائية للاغشية المحضرة تغير المقاومية الكهربائية كدالة لتغير درجة الحرارة ضمن المدى الحراري (303 - 423)K ، حيث التوصيلية تزداد بزيادة كل من درجة الحرارة والسمك وتبين من خلال قياسات تاثير هول ان نوع التوصيلية لاغشية مادة CuO من النوع الموجب - القابل (p - type), , تزداد تركيز حاملات الشحنة وتقل التحركية بازدياد السمك. اظهرت نتائج قياسات (تيار - جهد) في حالة الظلام للكاشف الضوئي المحضر تم حساب عامل المثالية للكواشف المصنعة اذ وجدنا انها تزداد بزيادة السمك , اذ بلغ اقل قيمة له (3.431) عند سمك nm (300), وجدنا ان الاستجابة الطيفية للكواشف المصنعة تعمل ضمن المنطقة الطيفية (400 - 900)nm مع وجود قمتين للكاشف ( - CuO/n - Sip) ، تظهر القمة الاولى عند الطول الموجي (688)nmاي ضمن منطقة المدى المرئي من الطيف الكهرومغناطيسي , والقمة الثانية عند الطول الموجي (810)nm اي ضمن منطقة مدى الاشعة تحت الحمراء القريبة, وكذلك الحال لبقية الكواشف المصنعة مع حدوث ازاحة طيفية في قمة الاستجابة الاولى ضمن المنطقة المرئية عند زيادة السمك . ولوحظ ان افضل نتائج الكواشف الضوئية المحضرة كانت عند سمك nm(300) حيث بلغت اعلى قيمة للاستجابة الطيفية 0.68)A/W), والكشفية النوعية كانت بحدود 1012 6.808)cm.Hz1/2.W - 1) عند الطول الموجي nm(708)، واعلى زمن فترة حياة الحاملات μ sec (10) , والتي تم الحصول عليها عند درجة حرارة الغرفة .في هذا البحث تم تصنيع خلية شمسية من المفرق الهجين (p - CuO/n - Si) المحضر من ترسيب اغشية ( (CuOالمحضرة بسمك مختلف بطريقة التبخير الحراري في الفراغ على قواعد سيليكونية احادية البلورة باتجاهية (111) من النوع (p - type) كما اظهرت خصائص (تيار الدائرة القصيرة وفولتية الدائرة القصيرة ) في حالة الاضاءة ان الخلية الشمسية ذات سمك nm((300 تمتلك اعلى قيم للكفاءة مقارنة بقية الخلايا الشمسية الاخرى ، اذ بلغت الكفاءة التحويلية (η=5.9%) في حالة الظلام, ان المفرق المصنع هو من النوع الحاد، ولوحظ تناقص السعة بزيادة كل من جهد الانحياز العكسي والسمك في حين يزداد عرض منطقة النضوب وقيمة جهد البناء الداخلي بزيادة السمك | In this research photodetector and solar cell fabrication from copper oxides (CuO) its properties were studied, which prepared by deposition CuO at different thickness (250,300,350 and 400)nm via thermal evaporation under vacuum method These films have been prepared by (Cu) Pure metal was deposited on glass and silicon substrate in room temperature (300K) and then oxidation prepared (Cu) films at temperature (300)ºC for one hour with exist air flow. The XRD investigation showed that all the films and atomic force microscopy properties (AFM), that all prepared films are polycrystalline with preferred orientation along (1 ̅11),(111) plane for all films that grain size all the films were homogeneous and smooth and root mean square )RMS) rise increases thickness.The optical measurements showed that the thin films (CuO) high absorbency over the visible region wavelength of (400 - 900)nm ,transmission and the optical energy band gap decrease from (1.8 - 1.4) eV with the increase thin film thickness.The electrical measurements showed variation of the resistivity as a function of temperature in the range (303 - 503)K ,The results showed that increasing in electrical conductivity with increasing both temperature and thickness , observe the Hall effect were (n - type) semiconductor and , also the value of Hall coefficient increasing thickness with increasing the increasing concentration and decrease mobility increasing thickness.The I - V characteristics measurements showed of prepared detectors under dark calculate the ideality factor detectors fabricated find increasing with increasing thickness then value less (3.431) on thickness (300nm) ,found the detectors fabricated showed a range of spectral responsively between (400 - 900) nm with two peaks (p - CuO/n - Si) one peak at (688)nm wavelength - visible region, while the second peak at (810)nm wavelength - IR region The same response for the detectors fabricated with wavelength shifted in the first peak response within IR region and The response time increase with increase thickness The good result of the spectral responsively found at thickness (300)nm which has a peak response about (0.68) A/W and a specific detectivity of )6.808) cm.Hz1/2.W - 11012at (861) nm wavelength with Maximum carrier life time which thickness (300)nm about (10) µ sec obtained at room temperature In this research was solar cell fabricated from (p - CuO/n - Si) heterojunction which prepared from deposited films by using thermal evaporation technique from (CuO) with different thickness, and different (p - type) single crystal silicon substrate with orientation (111). All illumination and (Short Circuit Current and Open Circuit Voltage) characteristics measurements showed solar cell with (300)nm thickness have higher efficiency among other cells, the efficiency (η) value from (η =5.9%) that the heterojunction is abrupt. The capacitance decreases with increasing reverse bias voltage, also with increasing thickness.The width of depletion layer and the value of built - in potential increases with increasing of thickness
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: العربية
الدرجة: ماجستير
الموضوع الدقيق: الاغشية الرقيقة
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: سمير عطا مكي
اسم المؤلف: هبة ممتاز علي

دراسة تاثير استبدال (Y2O3,Sb2O3,SrO) على الخصائص التركيبية والكهربائية للمركب فائق التوصيل HgBa2Ca2Cu3O8 Study the effect of (Y2O3,Sb2O3,SrO) substatution on the structural and electrical properties of the HgBa2Ca2Cu3O8+? superconductor compound

المستخلص: تتضمن الدراسة تاثير الاضافات (SrO or Y2O3 or Sb2O3) على الخواص التركيبية والكهربائيه للمركب الفائق التوصيل . [Hg 1223] تم حضير النماذج الاتيه HgBa2 - xSbxCa2Cu3O8+δ) وHgBa2 - xYxCa2Cu3O8+δو (HgBa2 - xSrxCa2Cu3O8+δ ولقيم x=0, 0.1, 0.2, 0.3 بطريقه تفاعل الحاله الصلبة.وقد درس الخصائص التركب البلوري باستخدام حيود الاشعة السينية ( XRD ) واظهرتحليل حيود الاشعة السينية ان جميع العينات ذات تركيب (tetragonal) تحوي على اطوارتركيبه فائقه التوصيل منخفضة (1212و1201) وعالية (1223) , وان النسب الطوريه ) نسبه الطورالعالي 1223) تزداد عند الاستبدال. كذلك وجد بان قيمة الثابت الشبيكة (c) يقل عند استبدال (SrO or Y2O3 or Sb2O3) في موقع الباريوم.حيث ان قيمه ثابت الشبيكه c للمركب HgBa2 - x(Sr or Sb or Y)x Ca2Cu3O8+δ ل x=0 هي c=15.75 ,في حين عند استبدال Srتنخفض قيمه ثابت الشبيكه cالى c=15.3510 (x=0.1), 15.3811 (x=0.2), 15.4431 (x=0.3),كذلك تنخفض قيمه ثابت c عند استبدال Sbالى 15.3417 (x=0.1), 15.4274 (0.2), 15.4432 (x=0.3).عند استبدال Yتنخفض قيمه ثابت الشبيكه cالى15.353 (x=0.1), 15.397 (0.2), 15.473 (x=0.3). . لحساب درجه الحراره الحرجه تم دراسة المقاوميه الكهربائيه باستخدام تقنيه القطاب الاربعة, حيث وجد ان درجه الحرارة الحرجه تزاد عند استبدال SrO وY2O3 وSb2O في موقع الباريوم وان اعلى درجه حرارة حرجة تم الحصول عليها عند استبدال Srوهي 138 كلفن. في درجة حرارة الغرفة تم قياس ثابت العزل الكهربائي كداله للتردد في المدى (Hz50 - 1MHZ), قد وجد ان ثابت العزل الكهربائي للتردد HZ 50 هو 45.489، بينما عند استبدال (Sr)ينخفض ثابت العزل الكهربائي الى 45.1715 (x=0.1)، 24،2123 (0.2x=) ,16.82781313 (x=0.3)، وانخفض ايضا ثابت العزل الكهربائي عند استبدال (Sb) الى 12،708 (x=0.1)، 10.339 (0.2x=) ,10.816 (x=0.3) لكن عند استبدال (Y) ثابت العزل الكهربائي يزداد الى 63.3682 (x=0.1) الى 26،378 (x=0.3). | The present thesis includes effect of (SrO, Y2O3 and Sb2O3) substatution on the structural and electrical properties of the [ Hg - 1223] compounds. Which have prepared the superconducting compounds HgBa2Ca2Cu3O8+δ ,HgBa2 - xYxCa2Cu3O8+δ, HgBa2 - xSbxCa2Cu3O8+δ and HgBa2 - xSrxCa2Cu3O8+δ (x=0.1,0.2,0.3) by useing Solid state reaction method. The crystal structures for all the specimen have been determined by of X - ray diffraction. Shows the XRD that all specimen have tetragonal structures correspond to the high [ Hg - 1223] and low - phase[ Hg - 1201 and Hg - 1212], and there is a decrease in c - parameter value when substituted of (Sb2O3 or SrO or Y2O3) in Barium site, where that c - parameter value of HgBa2 - x(Sr or Sb)x Ca2Cu3O8+δ for x= 0 is c=15.75, while at substatution (Sr) decreased c - parameter value to c=15.3510 (x=0.1), 15.3811 (x=0.2), 15.4431 (x=0.3), also decreased c - parameter value at substatution (Sb) to 15.3417 (x=0.1) , 15.4274 (0.2) and 15.4432 (x=0.3), at substatution (Y) decreased c - parameter value to 15.353 (x=0.1) , 15.397 (0.2) and 15.473 (x=0.3). while the volume fraction of the high - Tc phase increased with the increase of (Sb2O3 or SrO or Y2O3) content. Electrical resistivity was used to find the critical temperature using the four - probe technique, found that transition temperature which it increased when substituted (Sb2O3 or SrO or Y2O3), and we get a highest critical temperature is 138k. The dielectric constant have been measured and is a function of applied frequencies ( range of 50 Hz to 1MHz) at room temperature HgBa2 - x(Sr or Sb)x Ca2Cu3O8+δ for x= 0. It was found that the dielectric constant of at the frequency 50Hz is 45.489 , while at addition(Sr) decreased dielectric constant are 45.1715 (x=0.1) , 24.2123(0.2) and 16.82781313 (x=0.3),also decreased dielectric constant at addition(Sb) to 12.708 (x=0.1) , 10.339(0.2) and 10.816 (x=0.3).but when addition(Y) dielectric constant increasing are 63.3682 (x=0.1) to 26.378 (x=0.3). It was found that dielectric loss factor (tan) of all specimens decreased with the increase of frequency.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: كريم علي جاسم
اسم المؤلف: نور قاسم فاضل

دراسة خصائص التفاعل النووي (?,n) للنوى الفردية - الزوجية Z?29) ? 21) Studying the Properties of Nuclear Reaction (?,n) for Odd - even Nucleus (21?Z?29)

المستخلص: الدراسة الحالية تركزت على دراسة الخواص النووية للتفاعل النووي (الفا, نيوترون ) لنويات الهدف ذات الاعداد الذرية الفردية وللتفاعلات ( (_21^45)Sc(α,n)(_23^48)V, (_23^51)V (α,n) (_25^54)Mn , (_25^55)Mn(α,n)(_27^58)Co , (_27^59)Co(α,n)(_29^62)C , (_29^63)Cu(α,n)(_31^66)Ga (من خلال حساب المقاطع العرضية لتفاعلات (الفا , نيوترون ) للتفاعلات المذكورة اعلاه والمنشورة في الادبيات العالمية ( EXFOR , ENDF , JEF , JEFF , GENDL) لانتقاء الطاقات الملائمة في حساب التفاعل للمستوى الارضي باستعمال على برنامج الحاسوب ( (Matlab - 7.6 وبخطوات طاقية معينة . تم رسم وجدولت النتائج المستحصلة من تطبيق المعادلات شبه التجريبية لتمثيل جميع التفاعلات التي تربط بين تغير المقطع العرضي مع مدى الطاقة المعين . بالاضافة الى حساب وجدولت بعض الخواص النووية للنظائر الموجودة في هذه التفاعلات كما وتم حساب وجدولت كل من طاقة التفاعل وطاقة العتبة لكل تفاعل ومقارنتها مع النتائج الموجودة في مركز الدراسات النووية (NNDC) وهي متوافقة معها بشكل جيد جدا . وكذلك تم حساب قدرة الايقاف باستعمال برنامج SRIMو تم حساب الحاصل النيوتروني وفقا لصيغة زكلر لكل تفاعل بالاستعانة بقدرة الايقاف . وقد استعملت قيم المقاطع العرضية لتفاعلات (الفا ، نيوترون) في حساب المقاطع العرضية لتفاعلات العكسية (نيوترون ،الفا) وللمستوى الارضي وذلك باشتقاق المعادلة شبه التجريبية لقيم المقاطع العرضية العكسية لكل من التفاعلات الاتية (_23^48)V(n,α) (_21^45)Sc , (_25^54)Mn(n,α)(_23^51)V , (_27^58)Co(n,α)(_25^55)Mn , (_29^62)Cu(n,α)(_27^59)Co , (_31^66)Ga(n,α)(_29^63)Cu وايجاد الثوابت لكل تفاعل. تم رسم وجدولت النتائج المستحصله وايجاد معادلة ملائمة للرسم التي يمكن من خلالها الحصول على مقاطع عرضية بطريقة مباشرة وسريعة وبسيطة وموثوقة | This work was concerned on study the properties of (alpha, neutron) reactions for nuclei that’s have odd atomic number in nuclear reactions [(_21^45)Sc(α,n)(_23^48)V,(_23^51)V (α,n),(_ 25^54)Mn (α,n)(_27^58)Co, (_27^59)Co(α,n)(_29^62)Cu ,(_29^63)Cu(α,n)(_31^66)Ga] , by calculating the cross sections of (alpha, neutron) reactions. The nuclear reactions were published in the world libraries (EXFOR , ENDF , JEF , JEFF , GENDL) most recent to select the suitable energies in calculating reverse nuclear reactions for ground state. In the present work, the cross sections were calculated from semi - empirical formula which were obtained and listed in tables using computer programs(matlab 7.7R2008). These formulas represent the variation of the cross section with energy, which could be used to predict the values of uncalculated cross sections. The stopping power according to Zeigler formula was used in order to obtain the neutron yield for each nuclear reaction. Neutron yield is very important to determine the best way to produce specific isotopes. The evaluated cross sections for (α,n) are used to calculate the cross sections for inverse reactions (n,α) using empirical formula of the inverse cross sections .The values of neutron energy and inverse cross sections have been drown and listed in tables. Qo - value, threshold energy, reduced mass and binding energy have been calculated and listed in tables for each reaction
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: فاطمة عبد الامير سميرة احمد
اسم المؤلف: نور عادل محمد

الخصائص الكهروضوئية لاغشية TiO2 : CuO المحضرة بطريقة البلازما المنتجة بالليزر للتطبيقات الفوتونية Optoelectronic properties TiO2 : CuO films prepared by Laser induce plasma for photovoltaic applications

المستخلص: تم في القياسات تحقق من الخواص التركيبية والبصرية والكهربائية لاغشية ثنائي اوكسيد التيتانيوم TiO2)) النقية والمشوبة بمادة اوكسيد النحاس (CuO) والتي رسبت على ارضيات زجاجية منظفة بشكل مناسب بدرجة حرارة الغرفة وبتراكيز مختلفة من اوكسيد النحاس CuO (0,5,10,15,20)wt%. وقد استخدمت لذلك طريقة ترسيب الليزر النبضي (PLD) باستعمال ليزر النيدميوم ياك النبضي وبمعلمات ترسيب ثابتة وهي الطول الموجي 1064nm عند طاقة ثابتة 800mومعدل تكرار6Hz . وكان عدد النبضات المستخدمة (500), وقد لدنت الاغشية بدرجات حرارة مختلفة423, 523)K).تم تشخيص طبيعة تبلور الاغشية من خلال دراسة نمط حيود الاشعة السينية(XRD). اظهرت النتائج ان صفات الاغشية المحضرة ذات تركيب متعدد التبلور ومن النوع الرباعي والاتجاه السائد (110).كما وجد ان الحجم الحبيبي يزداد مع زيادة درجات الحرارة والتراكيز.كذلك تم دراسة طبوغرافية السطح باستخدام مجهر القوى الذرية (AFM), اذا تبين ان الحجم الحبيبي للاغشية المحضرة قد اعتمد على درجة حرارة التلدين. كما ادت زيادة درجة حرارة التلدين الى زيادة خشونة السطح.تمت دراسة الخواص البصرية بطريقتين من خلال تسجيل طيفي النفاذية والامتصاصية لمدى الاطوال الموجية (300 - 1100)nm، ومن خلال فحص شده الاستضاءة الفوتونية(PL) . اذ وجد ان قيمة فجوة الطاقة تقل بزيادة تراكيز مادة CuO والتلدين في كلا الفحصين.ومن خلال دراسة الخصائص الكهربائية للاغشية المحضرة, بينت النتائج ان التوصيلية الكهربائية قد زادت بينما هبطت قيمه طاقة التنشيط مع زيادة تركيز CuO ودرجة حرارة التلدين . اخيرا تم التعرف على نوع حاملات الشحنه من خلال قياسات تاثير هول, وكانت كافه الاغشية المحضرة من النوع السالب n , وبزيادة التركيز ودرجة حرارة التلدين يزداد تركيز حاملات الشحنة بينما تقل التحركية. | In this measurement, structural, optical, electrical properties of TiO2 (Nanocrytalline and CuO additive TiO2) were investigated. are successfully deposited on suitably cleaned glass substrate at constant room temperature, and different concentrations of CuO (0,5,10, 15,20)% wt. Pulse laser deposition(PLD) technique was used at a constant deposition parameter such as : (pulse Nd : YAG laser with λ=1064 nm, constant energy 800 mJ, repetition rate 6 Hz and No. of pulse was (500).The films were annealed at different annealing temperatures 423K and 523 K. The XRD measurements show that as deposit TiO2 : CuO thin films had polycrystalline structure, and XRD data of thin films coincided with tetragonal. The preferred orientation was along (110) direction for Rutile phase . The results show that the crystallite size increases with the increase of concentration of CuO and annealing temperature. AFM measurements confirmed that the films have good crystalline and homogeneous surface.The Root Mean Square (RMS) values of thin films surface roughness and grain size increased with the increase of annealing temperature. The optical energy gap is calculated by two techniques UV - Visible spectrum and Photoluminescence(PL)spectrum. Both indicate that the energy gap decreased with the increase of concentration of CuO and annealing temperature. By studying the electrical properties of TiO2 : CuO thin film, D.c measurements show that the increase of CuO concentration in the prepared thin films increases the conductivity, while the activation energy (Ea1,Ea2)decreases. Hall Effect measurements show that all films have n - type charge carriers and the increase of CuO concentration and annealing temperature lead to increase the concentration of charge carriers , while the mobility decreases
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
الموضوع الدقيق: الاغشية الرقيقة
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: صباح نوري مزهر
اسم المؤلف: نهى حسن حرب سلمان

معالجة كفاءة الكاشف الوميضي السائل NE213 باستخدام طريقة مونت كارلو The Efficiency Treatment of the NE213 Liquid Scintillator Detector Using Monte Carlo Method

المستخلص: تم في هذا البحث معالجة كفاءة الكاشف الوميضي العضوي السائل NE213 للنيوترونات السريعة في المدى الطاقي Mev (0.1 - 15) باستخدام طريقة مونت كارلو، حيث تم بناء برنامج (MCOSE) على افتراض محاكاة التفاعلات التي تحدث بين النيوترونات والمادة الوميضية للكاشف، وهذه التفاعلات هي، الاستطارة المرنة للنيوترونات من قبل الهيدروجين والكاربون، الاستطارة غير المرنة من قبل نوى الكاربون والتفاعلين C12(n,n1) C12*  3α, C12(n, α) B9e.تم في هذا البحث ايضا، تم معالجة كفاءة الكاشف NE213 للنيوترونات بحجوم كبيرة. ان استجابة الكاشف NE213 للنيوترونات لاتتشكل فقط بسبب الاستطارة المرنة للنيوترونات من قبل نوى الهيدروجين. بل ان شكل دالة الاستجابة يعتمد ايضا على البروتونات المترسبة من حجم الكاشف، الاستطارة المضاعفة للنيوترونات من قبل نوى الهيدروجين والاستطارة (المرنة وغير المرنة) من قبل نوى الكاربون. البروتونات المترسبة من حافة التاثير ذات اهمية كبيرة للحجوم الصغيرة من الكواشف الوميضية.كتب البرنامج بلغة (FORTRAN - 77)، قورنت النتائج الحالية لحساب كفائة الكاشف الوميضي NE213 مع البيانات العملية لقياس الكفاءة لثمانية عدادات وميضية بابعاد (8.5 × 100)cm وقد اوجدت هذه المقارنة توافقا جيدا من حيث السلوك والتقارب بين حساباتنا وتلك القياسات، واخيرا نسبة الخطا في الحسابات الحالية للكفاءة هي اقل من (2%) كمعدل في كل عملية تنفيذ. | In the present work, we have been used efficiency treatment of the organic liquid scintillator detector NE213 for fast neutrons in energy range (0.1 - 15)Mev using the Monte Carlo Method.MCOSE program have been used on considers the simulation of neutrous reactions with scintillator detector material; neutrons elastic scattering on hydrogen and carbon nucleus, inelastic scattering on carbon nucleus and the reactions : C12(n,n1) C12*  3α, C12(n, α) B9e.In this work, also have been used the efficiency treatment the big volumes of NE213 detector for neutrons (~1m). The response of the NE213 detector for neutrons is formed not merely due to the neutrons elastic scattering on hydrogen nucleus. The response function shape also depends on proton leakage from detector volume, double scattering on hydrogen and scattering (elastic, inelastic) on carbon nuclous. The proton leackage is an edge effect, which is most important for small volumes of scintillator detectors.The program has been written in FORTRAN - 77 language. The calculations results were compared with experimental data of the efficiency measurements, for eight NE213 (8.5 × 100)cm liquid scintillator detector.One can see a good agreement between our results and the experimental data. Finally, the average percentage error of the efficiency values in our calculations results was less than (2%).
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: العربية
الدرجة: ماجستير
الموضوع الدقيق: الفيزياء التطبيقية
السنة: 2005
الموضوع العام: علوم الفيزياء
اسم المشرف: علاء باقر كاظم ابراهيم رمضان عاكول
اسم المؤلف: نعمة حافظ ثابت البهادلي

تحضير ودراسة بعض الخصائص الفيزيائية لاغشية (Bi2O3 : Al) الرقيقة بطريقة التبخير الحراري في الفراغ Preparation and study of some Physical properties for( Bi2O3 : Al) Evaporated Thin Films under vacuum

المستخلص: حضرت اغشـيــة ( Bi2O3 ) على قواعد زجاجية بسمــك مختلـف( 450 , 350 , 250 ) nm وبـدقـة تصـل الـى ( ∓ 20 ) nm والمشـوب بمادة الالمنيـوم ( Al ) وبنسـب تشـويب مختلفة ( 3 , 2 , 1 ) % عنـد السمك ( 20 ∓ 450 ) nm والمحضرة بطريقـة التبخـر الحـراري في الفراغ وقد كان معدل ترسيب ( 1.20 nm / sec ) ,اضافة الى ذلك تم اكسدة اغشية البزموث ( Bi ) بدرجة حرارة ( 523 ) K وبزمن لا يزيد عن ساعة واحدة بوجود الهواء , وتـم دراسـة تاثيـر التلديـن علـى الخـواص التركيبيـة والبصـرية للاغشيـة النقيـة والمشـوبـة بـدرجات حــرارة ( 773 , 673 , 573 , R.T ) K ولمدة ساعة واحدة . استخـدمـت تقنية حيـود الاشعة لدراسـة الخصائص التركيبية للاغشية المحضرة واظهرت نتائج قياس حيود الاشعة السينية ( X - ray ) ان جميـع الاغشيـة المحضـرة النقيـة والمشوبـة تكون ذات تركيب متعـدد التبلـور ومـن النـوع الرباعـي والاتجاه السائد (201) لكل الاغشية المحضرة وزيادة معدل الحجم الحبيبي بزيادة سمك الغشاء , وهذا ما اشارت اليه قياسات مجهر القوة الذرية (AFM) كذلك يزداد معـدل الحجـم الحبيبي بزيادة نسب التشويب ما عدا النسبة ( 3 ) % . اظهرت الخصائص البصـرية ان النفاذية تتغير مع تغيـر كـل من سمك الغشاء ودرجة حرارة التلدين ونسب التشويب بالالمنيوم , وكذلـك تـم ايجاد فجـوة الطاقـة البصـرية للاغشيـة كافة فتبيـن انها مـن النـوع المباشـر المسموح لجميع الاغشية المحضرة وتزداد مع زيادة سمـك الغشاء, بينما تقـل مـع زيادة كـل من درجة حرارة التلدين ونسب التشويب عدا النسبة ( 3 % ) . اضافـة الى ذلـك تم حساب قيـم الثـوابـت البصريـة مثـل (معامل الامتصاص ومعامل الانكسار ومعامـل الخمـود وثابـت العـزل المعقد (الحقيقي والخيالي ) والتوصيلية الضـوئية ) كدالة الاطوال الموجية ( 1100 - 300 ) nm للاغشـية المحضرة . | This research includes studying the structural and optical properties of pure Bismuth Oxide ( Bi2O3 ) thin film at different thicknesses ( 250 , 350 and 450 ± 20 ) nm and doped by Aluminum ( Al ) of ( 450 ± 20 ) nm thickness with different doping ratios ( 1 , 2 , 3 ) % which is prepared by thermal evaporation method from depositing Bismuth film on glass substrates at R.T ( 300 ) K with deposition rate ( 1.20 nm / sec ) then oxidation Bismuth films at ( 523 ) K for one hour in air , Also it includes studing the effect of annealing temperature at ( R.T , 573 , 673 and 773 ) K for one hour on structural and optical properties for pure and doped films . The results of x - ray diffraction have been showed that pure and doped prepared films have polycrystalline structure with tetragonal phase with preferred orientation ( 201 ) for all prepared films the grain size increases with the increase of film thickness and this is in agreement with ( AFM ) measurements also it increases after doping except at ratio ( 3 % ) . This research also includes studing the optical properties of prepared pure and doped films . The transmission and absorption values changed with the changing of film thickness , annealing temperature and doping ratio with ( Al ) , the optical energy gap for allowed direct transition was evaluated and it increases with the increase of film thickness while it decreases with annealing temperature and doping percentage by ( Al ) except ratio ( 3 % ) . The optical properties results include calculating the optical constant (absorption coefficient , refractive index ,extinction coefficient, dielectric Constant with two parts real and imaginary and optical conductivity ) in the range of wave length ( 300 - 1100 ) nm for pure and doped films before and after annealing
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: العربية
الدرجة: ماجستير
الموضوع الدقيق: الاغشية الرقيقة
السنة: 2017
الموضوع العام: علوم الفيزياء
اسم المشرف: بشرى كاظم حسون الميالي
اسم المؤلف: نصر عيسى نجم