عرض: 25 50 75 100 النتائج

نتائج البحث: 25 من أصل 401

تاثيرات اشعة الليزر العلاجي واطئ القدرة على الخلايا الطبيعية والسرطانية من خلال تشعيع الغدة اللمفاوية للفئران

اسم المؤلف: مصطفى صالح علي الموسوي
اسم المشرف: تقي علي موسى الموسوي الواجدي ناهي يوسف ياسين
الموضوع العام: علوم الفيزياء
السنة: 2010
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ان تقنية التشعيع باستخدام الليزر واطئ القدرة Diode Laser ذي الاطوال الموجية المختلفة له القابلية على احداث تغييرات بايولوجية وذلك من خلال انتقال طاقة الفوتون الى النظام البايولوجي المستهدف، وبسبب الاهتمام بموضوع تاثيرات اشعة الليزر المستخدمة في العلاج الطبي فان تاثير ضوء الليزر ذي القدرة الواطئة على نشاط الخلايا المناعية تمت دراسته على الخلايا المناعية المميزة (macrophages and T cells) في نماذج حيوانية. وان جميع التجارب المتعلقة بالبحث قد انجزت في المركز العراقي لبحوث السرطان والوراثة الطبية التابع للجامعة المستنصرية.تم فحص 180 نموذج من اناث الفئران البيضاء بعمر شهرين وذات معدل وزن 25± 5 غم في هذا البحث، وطبقا لبروتوكول العلاج بالليزر تم تقسيم الفئران الى مجموعتين، المجموعة السليمة (90 (n= والمجموعة المصابة بسرطان الغدة اللبنية((AM3 (90 (n=. تم تشعيع الغدد اللمفاوية العنقية ل75 فارة من كل مجموعة باستخدام ليزر القدرة الواطئة ذي الاطوال الموجية (830,780,670,635,532) نانومتر. كل خمس عشرة فارة من كل مجموعة قد تم تشعيعها من احد تلك الليزرات بواسطة توجيه حزمة الليزر الى الغدد اللمفاوية لتلك الفئران مرتين في اليوم الواحد لمدة 20 دقيقة وللفترات 5، 10، 15، 20 ،25 يوم على التوالي، بينما لم يتم تشعيع مجموعة اخرى مكونة من 30فارة وذلك لاستخدامها لاغراض المقارنة مع المجاميع المشععة وللفترات الزمنية نفسها. في نهاية التجربة، تم قتل جميع الفئران بعد نهاية الفترات 5، 10، 15، 20 ،25 يوم على التوالي، لاجراء التشريح وازالة الغدد اللمفاوية بهدف اجراء الفحص النسيجي واستخدام طريقة الفحص الكيميائي النسيجي المناعي (IHC)، CD3) و(F4/80 لدراسة تاثيرات الليزر على الخلايا المناعية التي يمكن تحفيزها لتحسين وظيفة الغدة اللمفاوية بهدف زيادة استجابة الجهاز المناعي، وبعدها يتم فحص العينات تحت المجهر الضوئي.من خلال تحليل النتائج التي تم الحصول عليها في هذا البحث، وجد ان الاطوال الموجية المختلفة للليزرات القدرة الواطئة يحفز خلايا الجهاز المناعي. ان تشعيع الخلايا المناعية باستخدام ليزر واطئ القدرة كان مصحوبا بتثبيط معنوي ملحوظ في نمو الورم وكانت اغلب الملاحظات عند الاطوال الموحية 635,670 نانوميتر.الخلاصة________________________________________ان معدل زيادة نسبة T cell (في الفئران الطبيعية) في اليوم الخامس والعشرين من فترة التشعيع هي 30% فقط، بينما كان معدل الزيادة في نفس هذا النوع من الخلايا وبوجود الخلايا السرطانية 107%. وان معدل الزيادة في نسبة خلايا (macrophages) في الفئران الطبيعية في اليوم الخامس والعشرون من فترة التشعيع بالليزر ذو الطول الموجي 635 نانومتر233% والتي تقارب بنسبة كبيره لمعدل الزيادة 237% في نفس هذا النوع من الخلايا وبوجود الخلايا السرطانية .ان تاثير الليزر ذي الاطوال الموجية 635 و670 نانومتر لازال واضحا على حجم الورم للفئران المسرطنة. في اليوم الخامس من التشعيع فان الليزر ذا الطول الموجي 635نانومتر فقط قادر على ان يسبب تثبيط معنوي ملحوظ (p<0.05 ) في حجم الورم، بينما في ايام التشعيع 10، 15، 20 فقط الليزرات ذات الاطوال الموجية 635 و670نانومتر قادرة على ان تسبب تثبيط معنوي ملحوظ في حجم الورم للفئران المسرطنة المشععة. ان الليزر ذا الطول الموجي 635 نانومتر كان له التاثير الاعظم على تثبيط حجم الورم للفئران المسرطنة اذا ما تمت مقارنته مع بقية الاطوال الموجية للفئات العمرية المختلفة.نستنتج من هذه الدراسة ان تحفيز الغدة اللمفاوية يعتمد على نوع الليزر المستخدم، حيث ان هناك علاقة بين الطول الموجي لليزر المستخدم مع زيادة عدد الخلايا المناعية عندما تكون الجرعة الاشعاعية متساوية لجميع الاطوال الموجية | Low level diode laser of different wavelengths is an irradiation technique that has the ability to induce biological changes by transferring the photon energy to the targeted biological system, because of the large interest in the field biological effects of laser radiation used in laser therapy, the effect of extremely low - level laser light intensity on the immune cell activity has been studied in the animal model with well - characterized macrophages and T cells. All the experiments of this study were performed in the laboratories of the Iraqi center for cancer and medical genetics research (ICCMGR). A total number of 180 female white mice of two months age and mean weight of 25 ± 5 g were examined in this project. According to the laser treatment protocol the mice were divided into two groups, normal (n=90) and adenocarcenoma inoculation (n= 90). The cervical lymph nodes of only 75 mice of each group were irradiated by different wavelengths LLL (532, 635, 670, 780, and 830) nm. Each of the 15 mice were irradiated by one of these lasers by directing the laser beam to the mice lymph node for 20 mins for a period of 5,10,15,20 and 25 days. This was done twice daily. While the other 30 mice were not irradiated to use them for comparison study with the irradiated groups for the same mentioned periods of time. At the end of the experiment, the animals were killed. Each mouse was fixed on the back of anatomical slab. The specimen (lymph node) after removal were taken for histo - pathology exam and the immunohistochemistry (IHC) method (markers CD3 and F4/80) was used to study the effects of lasers on the macrophages and T lymphocyte cells which can be stimulated in order to enhance the lymph node function, and as a Abstract________________________________________result, enhance the immune system response. Then, the slides were examined microscopically. Through the analysis of the data obtained from this study, it was found that different wavelengths LLL stimulated the immune cells (T and Macrophages), the irradiation of these cells with LLL was associated with a remarkable and significant growth inhibition most noticeably at laser wavelengths of 635 and 670 nm. The average increase in the percentage of T cells (in healthy mice) at the 25th day of exposure to 635 nm laser light was only 30% while the average increase of such cells in the presence of cancer cells was 107%. In contrast, the average increase in the percentage of macrophages (in healthy mice) at the 25th day of exposure to 635 nm laser light was 233% which was very close to the average increase (237%) in the presence of cancer cells. The effect of the laser wavelengths of 635 and 670 nm was still obvious on the tumor volume of cancerous mice. At the fifth irradiation day, the only laser wavelength of 635nm was able to cause a noticeable significant (p<0.05) decrease of tumor volume of the irradiated cancerous mice. While at the exposure days 10, 15 and 20 the only two laser wavelengths of 635 and 670 nm were able to cause a noticeable significant decrease of the tumor volume of the irradiated cancerous mice. The laser wavelength of 635 nm has the maximum significant decrease of tumor volume of cancerous mice in comparison with irradiation of other laser wavelengths at different age groups. As a conclusion for this study, stimulation of lymph node depends on the kind of the used laser. There was a relationship between the used laser wavelength and the increment in the number of the T - cells and Macrophages when the laser dose was uniform for all wavelengths.

الرنين التنفقي في تركيب الشبيكة الفائقة نوع GaAs/ AlGaAs Resonance Tunneling in GaAs/AlGaAs Superlattice Structure

اسم المؤلف: مروى نجيب نجم الدين عبد الله
اسم المشرف: موفق كاظم عبد الرضا ابراهيم رمضان عاكول
الموضوع العام: علوم الفيزياء
السنة: 2006
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الاطروحة قدمت دراسة نظرية حول التنفق الرنيني في تركيب الوصلة الغير متجانسة للشبيكة الفائقة من .GaAs/Al0.3Ga0.7Asفقد قمنا بتحليل الحل العددي المضبوط والبسيط لمعادلة شرودنجر غير المعتمدة على الزمن ذات البعد الواحد لمسالة البئر الكمي. لذا يمكن حساب جميع مستويات الطاقة المقيدة وشبه المقيدة وكذلك دوالها الموجية للشكل الاعتباطي لمظهر الجهد. ان التنفق الرنيني لنظام متعدد الحواجز قد تم بحثه باستخدام تقنية مصفوفة النقل (التحويل). لقد اشتقت علاقة عامل النفوذية من خلال استخدام هذه التقنية (تقنية مصفوفة التحويل) مع دراسة جميع الاحتمالات في تغير عرض كل من الحاجز والبئر بالاضافة الى تغير عدد الحواجز. وقد استخرجت الطاقات الرنينية من العلاقة البيانية التي تربط عامل النفوذية وطاقة الجسيمات الساقطة على الحاجز عند الاخذ بنظر الاعتبار قيمة عامل النفوذية مقترب الى الواحد ولمختلف ابعاد الحاجز والبئر وعدد الحواجز. وفيما يتعلق بزمن عمر التنفق الرنيني للنظام من الممكن شرحه كيفيا (سلوكيا) من خلال مبدا الللادقة لهايزنبرك حيث تتناسب Δε عكسيا مع زمن عمر المستويات الطاقية (Γ) الموجودة في البئر الكمي. فالالكترونات ذات المستويات الطاقية العليا في البئر الكمي لها ان تنتفق عبر الحواجز الفعالة الواطئة ولهذا يكون لهزامن عمر قصير. جميع هذا العمل قد تركز بصورة خاصة على مبدا التقيد المكاني (الفضائي) لتاثيرات التكمم الطاقي. واظهرت نتائج هذا العمل بانها ليس فقط تضئ المفهوم الفيزيائي لفكرة التنفق الرنيني في تركيب الحاجز الكهربائي بل انها تعدت ذلك الى كيفية تصميم النبائط الكمية اللالكترونية والمستندة على تراكيب التنفق المتعدد الحواجز. ان جميع الحسابات في هذه الدراسة قد استندت على استخدام الحقيقة البرنامجية نوع (Mathcad Professional 14.0 2007). | In this thesis, a theoretical study of resonant tunneling in superlattice GaAs/Al0.3Ga0.7As structure is presented. We have analyzed a simple and accurate numerically solving the one - dimensional time - independent Schrödinger equation in quantum well (QW). One can thus calculate all bound and quasi - bound energy levels and the corresponding wave function for an arbitrarily shaped potential profile. Resonant tunneling in multi barrier is investigated by using transfer matrix technique. The formula for the transmission coefficient is derived from the same technique and then varying in the barriers and wells width and barriers numbers to find their effect on the transmission coefficient. The resonant energies are found from the curve between T vs. ε when taking into the account the condition T≈1; and its dependence on the barrier and well width for different barrier numbers are analyzed. Resonant tunneling life time for the investigated system can be qualitatively explained by the Heisenberg uncertainty principle since Δ ε should be inversely proportional to the lifetime (Γ) of the states in the well. Electrons at higher levels in the well have to tunnel through lower effective barriers and should therefore have a shorter (Γ). Thus all of the work in this area has focused almost exclusively on spatial confinement of energy quantization effects. The results shown in this work not only shed new light on the physics of resonant tunneling in electric barrier structure but are also helpful in designing quantum devices based on multi barrier tunneling structures. The program, which has been used for all the calculations in this work, is Mathcad Professional 14.0 2007 software

الخواص الكهربائية لنبائط شوتكي Ni / n - GaAs المشعع بجسيمات الفا وتاثيرات التلدين الحراري فيها The Electrical Properties Of Schottky devices Ni /n - GaAs Radiated With Alpha Particle And Its Thermal Annealing Effect

اسم المؤلف: مسعود خليل شكيب
اسم المشرف: ابراهيم رمضان عاكول كاظم حسن حسين الموسوي
الموضوع العام: علوم الفيزياء
السنة: 2006
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الكلمات الدلالية:
  • فيزياء الحالة الصلبة
الصفحات الاولى:
المستخلص: في هذا البحث تم تصنيع ومقارنة نوعين من نبائط شوتكي Ni/n - GaAs ( المشععة بجسيمات الفا وغير المشععة ) حيث تم اختيار الارضيـــــــة ( substrate ) واختيار المعدن المرسب للاتصال الفوقي باستخدام النيكل مع اختيار سبيكة الذهب - جرمانيوم Ge - Au للاتصال الخلفي من نوع n وقد تم اختيار معدن ارسنيد الجاليوم GaAs وذلك لامتلاكه تحركية عالية نسبيا مقارنة بالسيليكون وتكون مقاومتها اقل من السيليكون عند درجة حرارة الغرفة .تم تحضير نماذج من Ni/n - GaAs وقمنا بتشعيع الجزء الاول بجسيمات الفا وكانت مشععة بالجرع ( 1.48 x 105 - 5.91 x 105 ) p/cm2 وقمنا بدراسة اليات التوصيل الكهربائي للتيار للنبائط كافة حيث تبين ان الية توصيل التيار للنبائط غير المشععة هي الانبعاث الحراري وان ارتفاع الحاجز كان بحدود ( 0.66 eV ) وعامل المثالية ( 1.1 ) وزادت قيم هذين المتغيرين مع زيادة جرع الاشعاع كما وتغيرت الية توصيل التيار لتصبح علاقة التولد - الاتحاد والتيار المحدد بالشحنة الفضائية بعد عملية التشعيع . كما تبين ان ادخال التلف الاشعاعي الى منطقة الاستنزاف لحاجز شوتكي بسبب نقصان في قيمة التيار الامامي عند الفولتيات العالية وعلى عكس من ذلك فانه بسبب زيادة في تيار الانحياز العكسي التي يعود سببها الى تيارات التسرب السطحية المتولدة بسبب التلف الشعاعي .اما نتائج مميزات السعة - فولتية للانحياز العكسي فقد اظهرت ان زيادة التلف الحاصل في النبائط يقلل السعة فضلا عن نقصان تركيز الحاملات من ( 1.16 x 1018 ) cm - 3 للنبائط غير المشععة الى ( 2.57 x 1017 ) cm - 3 للنبائط المشععة بالجرعة ( 5.91 x 105 ) p/cm2 وذلك بسبب تولد مراكز تعويضية Compensating Centers وبالتالي تكون منطقة ذات مقاومية عالية .اظهرت هذه النتائج بان قيم ارتفاع الحاجز Φ B تتطابق بشكل جيد مع قيمها المحسوبة من قياسات التيار - فولتية .ان سعة النبائط تزداد بانتظام مع زيادة فولتية الانحياز الامامي وتصبح هذه الزيادة سريعة عند منطقة الفولتيات العالية وهذه الحالة تناظر منطقة الحزمة المسطحة اذ انه يزداد التغير في الحزمة المسطحة وتقل السعة كلمزااد مستوى التشعيع .تم انجاز عملية التلدين الحراري على النبائط المشععة بالجرعة ( 5.91 x 105 ) p/cm2 عند درجات الحرارة ( 423 - 523 ) K وعند مقارنة خواص النبائط المشععة الملدنة مع النبائط غير المشععة تبين ان خواصها تقترب من خواص الحالة غير المشــععة بعد التلدين الحــراري ، وذلك لحصول عملية الاستقرار في العيوب المتولدة نتيجة الاشعاع ولوحظ بان تاثيرات التلدين الحراري تكون مؤقتة لان التلف الحاصل بعملية التشعيع هو من النوع الدائم .كماو قمنا بدراسة مميزات التيار فولتية عند درجات الحرارة الواطئة وقد بينت هذه النتائج ان طاقات التنشيط ∆E1 و∆E2 تقل مع زيادة مســــــــتوى التشعيع من القيمتين ( 0.15 - 0.031 ) eV قبل عملية التشعيع الى القيمتين ( 0.055 - 0.011 ) eV على الترتيب بعد عملية التشعيع بجرعــة ( 5.91 x 105 ) p/cm2. | In this research , two types of Ni /n - GaAs schottky barrier devices were fabricated (unradiated,irradiated with alpha particle ) and compared .We take the substate from GaAs and Ni to the deposited metals for up contact with Ge - Au ingot for down contactn type , the purpose of taking GaAs because of its high movement in comparing with Si and its resistance is less than Si in room temperature.We prepare samples from Ni / GaAs , the fist part of samples is radiated by alpha particle with doses (1.48 x 105 - 5.91 x 105 ) p / cm2 and when we study the electrical contact mechanics to all devices we found that the electrical contact mechanics to unradiated devices is the thermonic emission and the height of the barrier approximately is (0.66 eV) and the ideality factor is (1.1) , the value of these two factors changed by increase the dose of radiation and the electrical contact mechanics was changed and become recombination currentand the space church current after the radiation action.When we put the radiation destroy inside the exhaustion aria for schottky barrier the value of the forward current decreases with high volts and vise verse the reveres current increase because of the top follow currents in purpose of radiation destroy .The result of (C - V ) characteristics for reveres currentappear that the destroy increase in the devises make the capacity decrees with carrier concentration from (1.16 x 1018)cm - 3 for unradiated devices to ( 2.57 x 1017) cm - 3 for irradiateddevices with dose (5.91 x 105) p/cm2 because of the compensating centers and become the high resistance reign the results show that the high of barriers ФB is the same with its value that we calculated from the measurement of (I - V ) .the capacity of devices increase with the increase of forward voltage and this increase become more in high voltage reign , this state is the same with flat beam reign when the reign increase and the capacity decreases with increase the level of the radiation .the annealing action was done on the irradiated devices with the dose (5.91 x 105) p / cm2 in the temperatures (423 - 523) K .when we compared the properties of the annealing irradiated devices with the unradiated devices we saw that its properties become near with unradiated devices after annealing because of the stability in defects because of the radiation , and we notice that the defects is from the type of lasting .also we study the characteristics of ( I - V ) in law temperature and we notice that the activation energies decreases with the radiation level ∆E1 and ∆E2 with the values before radiation ( 0.15 - 0.031) eV to ( 0.055 - 0.011) eV after radiation by the dose ( 5.91 x 105) p / cm2

دراسة الخصائص الطيفية والحرارية لجزيئتي (CO ،CO2) باستخدام طرائق الكم الشبه تجريبية Study of Spectroscopic And Thermodynamic Properties Of (CO ,CO2) Molecules By Using The Semiemperical Quantum Methods

اسم المؤلف: مشتاق طالب جاسم الهلالي
اسم المشرف: محمد تقي حسين كاظم حسن حسين الموسوي
الموضوع العام: علوم الفيزياء
السنة: 2005
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا البحث دراسة نوعين من الجزيئات الخطية هما جزيئة ثاني اوكسيد الكاربون كنموذج للجزيئات الخطية متعددة الذرات وجزيئة احادي اوكسيد الكاربون كنموذج للجزيئات الخطية ثنائية الذرة، وشملت هذه الدراسة خواصها الطيفية والحرارية حيث تم حساب الشكل الهندسي الفراغي للجزيئة ورسم منحني طاقة الجهد لها ومنه تم حساب طاقة الجزيئة الكلية عند وضع التوازن للجزيئة حيث كانت قيمة الطاقة الكلية لجزيئة CO2 ( - 706.159ev) عند طول اصرة (C - O) (1.2Ao) والطاقة الكلية لجزيئة CO ( - 411.166ev) عند طول اصرة (C - O) (1.2Ao)، كذلك ومن خلال منحني طاقة الجهد تم حساب طاقة التفكك الطيفية للجزيئة حيث كانت طاقة التفكك الطيفية لجزيئة CO2 تساوي (6.8ev)، بينما كانت طاقة التفكك الطيفية لجزيئة CO تساوي (14.95ev).كذلك تم حساب الترددات الاهتزازية عند وضع التوازن وانماط الاهتزاز الاساسية والاطوال الموجية لكل جزيئة، وتم ايضا حساب مستويات الطاقة لكل جزيئة ومعرفة طاقة اعلى مدار جزيئي مشغول EHOMO وطاقة ادنى مدار جزيئي غير مشغول ELUMO حيث كانت قيمتها لجزيئة CO2 ( - 12.735ev) و(1.035ev) على التوالي وقيمتها لجزيئة CO ( - 13.03ev) و(0.563ev) على التوالي.وكذلك تم حساب فجوة الطاقة وجهد التاين لكل جزيئة حيث كانت قيمة فجوة الطاقة لجزيئة CO2 تساوي (13.77ev) وجهد تاينها (12.735ev) بينما كانت فجوة الطاقة لجزيئة CO تساوي (13.59ev) وجهد تاينها (13.03ev).كما تم ايضا ومن خلال برنامج Hyperchem توضيح كثافة الشحنة الكلية (Total charge density) وجهد الكهربية الساكنة (Electrostatic potential) لكل جزيئة بالرسومات ذات البعدين والثلاثة ابعاد بالاضافة الى عزم ثنائي القطب حيث كان لجزيئة CO2 (0.0002831 deby) ولجزيئة CO (0.185 deby).كذلك تمت دراسة الخواص الحرارية (الثرموديناميكية) لكل جزيئة عند مدى حراري امتد من 100K الى 2000K حيث كانت قيم الخواص الحرارية لجزيئة CO2 وCO عند حرارة 298K كالاتي : الجزيئة Molecule السعة الحراريةHeat Capacity (Cal/K.mol) حرارة التكوينHeat of Formation(Kcal/mol) الانتروبيEntropy (Cal/K/mol) الانثالبيEnthalpy (Cal/mol)CO2 9.472 - 86.039 53.009 2340.340CO 6.9589 - 19.751 47.2 2065.849وتم رسم العلاقات البيانية بين هذه الخواص ودرجة الحرارة ومناقشة النتائج بعد مقارنتها مع النتائج العملية.تمت هذه الحسابات جميعها باستخدام الطريقة شبه التجريبية MNDO - PM3 ومقارنتها بالطرائق شبه التجريبية الاخرى MINDO/3، AM1، MNDO، حيث اعطت نتائج اقرب الى النتائج العملية. | In this research we study two kinds of linear molecules they are carbon dioxide molecule as a type for the multi atoms and carbon monoxide as a type for he linear diatom molecule.We calculated some of spectroscopy and thermodynamic properties of these molecules. This included calculation of equilibrium geometry, potential curve, from this curve total energy of molecule at equilibrium distance calculated, for CO2 molecule total energy was ( - 706.159 ev) at bond length (C - O) (1.2Ao), for CO molecule total energy was ( - 411.166 ev) at equilibrium distance (1.2Ao). and from potential curve spectroscopy dissociation energy for these molecule were calculated, for CO2 equal (6.8 ev) and for CO equal )((14.95 ev).And calculated vibration frequencies at equilibrium state and basic vibrational modes, wave length and energy levels for each molecule, to determine energy of high occupied molecular orbital EHOMO and energy of low unoccupied molecular or orbital ELUMO, it has value ( - 12.735ev), (1.035ev) respectively for CO2 molecule, and for CO molecule ( - 13.03ev), )0.563ev) respectively.In this work calculated the energy gap and iozation potential for each molecule, where it has value of energy gap for CO2 molecule equal (13.77ev) and it has iozation potential (12.735ev); while the energy gap for CO molecule equal (13.59ev) and it has iozation potential (13.03ev).From the hyperchem program it explain the total charge density and electrostatic potential for each molecule by graphics at two dimension and three dimension. Although, the dipole moment of CO2 molecule equal to (0.0002831) deby, while to CO molecule equal to (0.185) deby.Thermal properties for each molecule at thermal range (100 - 2000)K was studied.Thermal properties values for CO2 and CO molecules at 298K shown in the table : Molecule Heat Capacity (Cal/K.mol) Heat of Formation(KCal/mol) Entropy (Cal/K/mol) Enthalpy (Cal/mol)CO2 9.472 - 86.039 53.009 2340.340CO 6.9589 - 19.751 47.2 2065.849and plotting graphic relations among these properties and temperature and discussion result and compared with experimental result.All calculations by using semiemperical method (MNDO - PM3) from among the other methods (MINDO/3, AM1, MNDO) because it gives close result for partial result.

بناء دوائر مشغل ليزر شبه الموصل المرئي لقياس المسافة Driver circuit construction using visible semiconductor laser for distance measurement

اسم المؤلف: محمد فرحان راهي الدريساوي
اسم المشرف: بان رشيد علي
الموضوع العام: علوم الفيزياء
السنة: 2010
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: In this research study and construction of electronic circuits the ability of the laser (laboratory) are mediated by the semiconductor laser in the visible spectral response of the photon detector. (0.35 - 1.35) μm and the estimated circuit composed of the following : A - The transmission unit. B - A unit of receipt. T - Service counter. W - Department of calibration of the counter. C - Department of Qallab the counter to generate the highfrequencies to calculate the time. H - and the cargo unit. G - Department of lasers operating space. D - The department of central processing. All of these services are designed and run program brokered Multisium 2007. And the distance measured this ability is mediated. (100m) and will be equipped with a battery system and reloading as well as the lowest sensitivity possible capacity for the reflected radiation (0.11×10 - 9W)

تصنيع كاشف المفرق الهجين CdO/p - Si بطريقة الرش الكيميائي الحراري PREPARATION OF CdO/p - Si HETEROJUNCTION DETECTOR BY CHEMICAL SPRAY PYROLYSIS

اسم المؤلف: محمد غفار فرج
اسم المشرف: رائد عبد الوهاب اسماعيل سلوان كمال جميل
الموضوع العام: علوم الفيزياء
السنة: 2004
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا البحث، تم لاول مرة تصنيع كاشف يعمل بنمط الفولتائية الضوئية من المفرق الهجين غير المتماثل n - CdO/p - Si والمصنع بطريقة الرش الكيميائي الحراري وباسماك 50, 100 and 150 nm وتم استخدام عدة فولتيات انحياز تراوحت بين 1 - 5 Volts. لقد اوضحت النتائج ان هذا الكاشف يعمل بالمدى الطيفي 400 - 1000 nm.بينت نتائج قياسات تاثير هول ان الطبقة المرسبة من CdO ذات توصيلية مانحة لذلك فان المفرق المتكون هو من النوع غير المتماثل.اظهرت نتائج خصائص تيار - جهد ان كل من تيار الظلام وتيار الضوضاء يزدادان بزيادة سمك CdO. كشفت هذه النتائج ايضا ان عامل المثالية يزداد بزيادة سمك غشاء CdO مما يعطي مؤشرا واضحا على زيادة تركيز العيوب.بينت نتائج قياس سعة - جهد ان المفرق المصنع من النوع الحاد وان قيمة جهد البناء الداخلي تقل بزيادة سمك CdO.ان الدراسات الخاصة بالاستجابة الطيفية بينت ان لهذه الكواشف استجابية تتميز بقمتين : الاولى عند الطول الموجي 600 nm والثانية عند الطول الموجي 800 nm. وبلغت اعلى قيمة للاستجابية 0.46 A/W عند الطول الموجي 800 nm وباستخدام جهد انحياز 3 Volts وان الكفاءة الكمية القصوى بلغت 71% واعلى قيمة للكشفية كانت بحدود 3.6 x 1011 cm.Hz1/2.W - 1 كما ابدت الكواشف المصنعة استجابة لليزر He - Ne. وقد وجد ان الاستجابية الطيفية تقل بزيادة سمك غشاء CdO وان افضل سمك في هذا البحث هو 50 nm

دراسة وتحقيق بشان عدم استقرارية الانجراف المنحني في الغلاف المغناطيسي للنجم النابض بالقرب من منطقة الاسطوانة الضوئية Study and Investigation of Curvature Drift Instability in Pulsar Magnetosphere Near Light Cylindrical Region

اسم المؤلف: محمد عبد الستار عبد الرحمن
اسم المشرف: ماجدة حمدان خضير الكبيسي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The case of curvature drift instability in pulsar magnetosphere is a phenomenon may be responsible of many properties including radio waves, that was studied its reasons. We studied the magnetic fields around the pulsar, and our study was nearby the light cylinder region, because the curvature of the magnetic field be greater in the light cylinder region (~ 107 cm).The value of magnetic field was calculated by using mat lab program in two ways : The standard model and relativistic model. Where the relativistic model includes two cases : flat space time and curved space time. The values of the two cases were compared, According to standard model the magnitude magnetic field component (Br ) equal to 1012 G and the magnitude magnetic field component (Bθ ) equal to 1011 G but in relativistic model equal to 1019 G and 1014 G respectively and this noticeable increasing in values because the mass factor enter in calculation , This was first part from study.The second part of the study includes the calculation of drift velocity, which was about (107 cm/sec) in standard model, The drift velocity in relativistic model was (102 cm/sec), Where the drift velocity values which can produce the curvature radiation must be in the range between (106 cm/sec) and less than the speed light.The calculated drift velocity was used to calculate the growth rate instability for each the primary particles which its Lorentz factor equal (108), the value of growth rate instability (1013 s - 1), and the energy loss rate (10 - 6 erg.s), while the secondary particles which its Lorentz factor equal to (104), the value of growth rate instability was (1015 s - 1) and the energy loss rate equal to (10 - 21 erg.s)

تاثير المعاملة الحرارية على الخواص البصرية للخلائط البوليمرية (PVC/PS/PMMA) Effect of Heat Treatment on Optical Properties of Polymer Blends (PVC/PS/PMMA)

اسم المؤلف: محمد زورة حسن
اسم المشرف: اسرار عبد المنعم سعيد
الموضوع العام: علوم الفيزياء
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: العمل الحالي من البحث يهتم بدراسة تاثير نسبة الخلط على الخواص البصرية للنماذج البوليمرية مدار البحث PS, PMMA] [PVC, والخلائط الثنائية ] [PS/PMMA, PVC/PMMA, PVC/PS والخلائط الثلاثية [PVC/PS/PMMA] وبمختلف التراكيز. كذلك دراسة تاثير المعاملة الحرارية على الخواص البصريه للانظمة البوليمرية [PVC/PS/PMMA] والخلائط الثنائية بنسبة [50 %PS/50%PMMA, 50% PMMA/ 50% PVC / 50% PS /50% PVC] صبت العينات كاغشية من البوليمرات المذكورة اعلاه والخلائط الثنائية والثلاثية ولمختلف التراكيز . وفحصت النماذج البوليمرية المحضرة طيفيا لاختيار نماذج البوليمرات ذات افضل خواص بصرية وجد بان الخليط الثنائي ( 50% PMMA/ 50% PVC) يمتلك احسن خواص بصرية وقد وجدت فجوة الطاقة الخليط تساوي(4.8eV) .اخضعت البوليمرات النقية[PVC/PS/PMMA] , مع الخلائط الثنائية[50 %PS/50%PMMA, 50% PMMA/ 50% PVC 50% PS /50% PVC] الى المعاملة الحرارية ضمن المدى[50 - 175 ºC] ولمدة ساعتين لدراسة تاثير المعاملة الحرارية على الخواص البصرية .لوحظ بالنسبة للانظمة البوليمرية المعاملة حراريا تغير في اطياف الامتصاص وضمن مديات الطول الموجي والتي تعتمد على نوع البوليمر والخليط البوليمري. التحلل الحراري ادى الى زيادة في اطياف الامتصاص للنماذج المعرضة للحرارة.حيث تعتمد الزيادة على نوع البوليمر والخليط البوليمري خصوصا عند درجة الحرارة 175 ºC بالنسبه الى(PS (وجد تناقص في اطياف الامتصاصية في الحالات التي يتسبب فيها التفكك الحراري بتلف سطحي مثل التصدعات والتشققات . حسبت فجوة الطاقة وطاقة اورباخ قبل وبعد المعاملة الحرارية للنماذج البوليمرية مدار البحث .اظهرت النتائج السلوك اللاخطي لعلاقه الترابط ما بين الثوابت البصرية والنسب الوزنية للخليط البوليمري قد اعزيت الى كونها غيرمتوافقة الخلط .ان السلوك اللاخطي لعلاقة الترابط بين الثوابت البصرية ودرجة الحرارة للنماذج البوليمرية المعاملة حراريا يعود الى التفكك الحراري غير النظامي لنماذج البحث . ولقد تم الكشف عن التلف السطحي ] التصدعات والتشققات[ الناجم عن التفكك الحراري باستخدام الميكروسكوب وجهاز المجهر الالكتروني الماسح[SEM] وجد بان التفكك الحراري من السهولة ان يحدث تلف سطحي ميكانيكي. لتحديد الخواص الرئيسيه للحزم اجريت فحوصات [FTIR] للنماذج البوليمرية قبل وبعد المعاملة الحرارية لتمييز خواص الحزم الرئيسية وتفسير نتائجها. | The present work was concerned with study of the blending ratio effect on the optical properties of the polymer systems involved [Poly(vinyl chloride) (PVC), Polystyrene (PS), Polymethylmethacrylate (PMMA)], binary blends [PS/PMMA, PVC/PMMA, PVC/PS] and ternary blends [PVC/PS/PMMA] at different concentrations. Also this work was concerned with study the effect of heat treatment of optical properties of polymer system involved [PVC/PS/PMMA] and binary blend with ratios, [50 %PS/50%PMMA, 50% PMMA/ 50% PVC and 50% PS /50% PVC]. The samples were casted as films from the homopolymer stated above and the blends as a binary and ternary blend at different concentration. These prepared polymer systems were evaluated spectrophotometically for selection the polymer systems of the best optical properties. It was found that 50% PMMA/ 50% PVC binary blend has the best optical properties. The results showed that its energy gap was (4.8eV). The homopolymer [PVC/PS/PMMA] and the binary blend [50 %PS/50%PMMA, 50% PMMA/ 50% PVC and 50% PS /50% PVC] were subjected to heat treatment with range of [50 - 175 ºC] for (2hr) to study the effect of heat treatment on their optical properties. The absorption spectra of the heat polymer systems showed heating induced absorption changes in the wavelength range, which depends on the polymer type and polymer blend. The thermal degradation caused increment in the absorption of degraded samples. The increment depended on the polymer type and polymer blend especially at 175 ºC. For (PS) decreasing in absorption was also found for cases in which, thermal degradation caused surface damage i.e. cracks and crazes formation. Also the optical energy gap and urbach energy were calculated the absorption spectra before and after heat treatment to the polymer systems involved.The results showed nonlinear relationship between the optical constants and blend ratio, it was attributed to their immiscibility. The nonlinear relationship between the optical constant of the heat treatment polymer systems and polymer blend with the heating temperature was attributed to the unsystematic thermal degradation induced by heating. Morphological investigations for the surface damages [crazes and cracks] caused were performed by optical microscope and SEM. It was found that the thermal degradation lead to some mechanical surface damage. FTIR spectroscopy was carried out for polymer systems before and after heat treatment to identify the region of the main characteristic bands and its results was investigated.

وصف العازل الكهربائي لقدرة ايقاف الجسيمات المشحونة في المواد الصلبة Dielectric Description of Stopping Power for charge particles in Solid Materials

اسم المؤلف: محمد جاسم محمد علي الكندي
اسم المشرف: خالد عبد الوهاب احمد
الموضوع العام: علوم الفيزياء
السنة: 2004
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا البحث اجراء دراسة نظرية لموضوع دالة العازل (dielectric function)، فقد تمت مقارنة نوعين مهمين من دوال العازل وهي دالة العازل للباحث (Lindhard1954) ، ودالة العازل للباحث (Mermin 1970). وقد تضمنت الدراسة استخدام هذين الانموذجين في حساب كل من الجهد المحتث والمؤثر (Induce and Wake Potential) ، والقوى المؤثرة (القوة الموقفة Stopping force والقوة الجانبية Lateral force) بالاحداثيات الديكارتية (Cartizian coordintate) (x,z) والاحداثيات الاسطوانية (Cylindrical corrdinate) (ρ,z). وكذلك حساب قدرة الايقاف (Stopping power) والتطوح في الطاقة (Straggling of energy) للجسيمات المشحونة (البروتونات) الساقطة على اهداف صلبة (الالمنيوم Al، السيليكون Si، النحاس Cu، الفضة Ag، الذهب Au) والتي تتحرك بسرعة منتظمة ) υ (. استخدمت الطرائق الرياضية التقريبية للحساب، وبرمجة بعض المعادلات وفق برنامج كتب بلغة فورتران (Fortran - 90) ، للحصول على النتائج النظرية المطلوبة التي تم توضيحها كرسوم بيانية.وبالنتيجة استنتجنا ان الاختلاف بين الانموذجين لدالة العازل (Mermin 1970 and Lindhard 1954) يقع في منطقة السرع الواطئة والمتوسطة، ولوحظ هناك تطابقا" واضحا" عند السرع العالية، وان تاثير الجهد المؤثر (Wake potential) ، والقوة الموقفة (Stopping force) (التي تعرف على انها قدرة الايقاف) يكون باعلى قيمة له لحظة تفاعل البرتون مع الهدف اي عند النقطة المرجعية (Reference point =0, Z=0) على عكس القوة الجانبية (Lateral force) التي لا يوجد لها اي تاثير عند النقطة المرجعية. ومن المهم ايضا الاخذ بنظر الاعتبار الحالات الخاصة للسرعة التي يتحرك بها الجسيم المشحون ونوع الوسط العازل المستخدم. | In this research a theoretical study carried out on the subject of dielectric function, where the comparison between two important dielectric functions (which is the Lindhard 1954 dielectric function and Mermin 1970 dielectric function) has been performed. This investigation has dealt with using these two samples to calculate the Induce and wake potential, stopping force and lateral force in the cartizian coordinate (x,z) and cylindrical coordinate (z, ). And also to calculate the stopping power and straggling of energy for the charged particales (protons) falling on the solid targets (Aluminum [Al], Silicon [Si], Copper [Cu], Sliver [Ag], Gold [Au]). A mathematical approximative methods used in the calculation and some of equation where programmed by computer program (Fortran 90) to obtain the theoretical results which is shown in graphic. In the results we conclude that the difference between the two dielectric functions (Lindhard 1954 and Mermin 1970) is in the low and medium velocities and also seen that it is superposed in the high velocities and the effect of the wake potential and stopping force be in the maximum value the moment of intraction between protons and target i. e. (in the reference point  = 0, Z = 0) on the opposite of lateral force which has no effect on the Reference point. It is also important to take to consideration the special cases of velocity of the charged particles and the kind of dielectric medium used

ابطاء الضوء باستخدام الشفافية الكهرومغناطيسية المحتثة في انظمة InGaAs/InGaAsP شبه الموصلة النقطية الكمية Slow Light Using Electromagnetic Induced Transparency in InGaAs/InGaAsP Semiconductor Quantum Dot Systems

اسم المؤلف: محسن كاظم عبد الخيكاني
اسم المشرف: امين حبيب حنون الخرسان كاظم حسن حسين الموسوي
الموضوع العام: علوم الفيزياء
السنة: 2008
الموضوع الدقيق: الالياف الضوئية
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: اصبحت المقدرة على معالجة سرعة الضوء احد الموضوعات المثيرة حاليا في البصريات. هذه الاطروحة تتناول ابطاء الضوء في تراكيب اشباه الموصلات النقطية الكمية ذات البناء النانو اعتمادا" على خواصها التي تم التنبؤ بها. استخدمت انظمة InGaAs/In1 - xGaxAsyP1 - y/InP النقطية الكمية كموضوع للدراسة. ان هذا نتيجة لخواصها الطيفية حيث يصبح العمل ممكنا" عند الطول الموجي الخاص بالاتصالات البصرية (1550 نانوميتر). استخدمت الشفافية المحتثة كهرومغناطيسيا لابطاء الضوء في هذه الدراسة التي يمكن ان تقسم الى اقسام. في القسم الاول ، وبافتراض ان النقط الكمية تاخذ شكل قرص تمت دراسة انظمة InGaAs/In1 - xGaxAsyP1 - y/InP النقطية الكمية لنسب0.1=x ،0.2،0.39 وابعاد (14، 3.5)، (14، 6.5)، و(30،8) نانوميتر على التوالي لكل من (نصف القطر، الارتفاع) للقرص الكمي. استخدمت دوال بسل لوصف دوال الموجة. ومن ثم، تم حساب مستويات الطاقة في مستوي القرص وعند الارتفاع. تمت دراسة ابعاد مختلفة من (نصف القطر، الارتفاع) للنسبة 0.1=x. اعتمادا" على حساب مستويات الطاقة، تمت دراسة التاثيرية الخطية لهذه الانظمة النقطية الكمية ثلاثية المستويات في الجزء الثاني من هذه الدراسة. تمت دراسة تاثير معاملات مثل تركيب الطبقة الرطبة، قدرة الضخ، العرض المتجانس للخط، معدل الاسترخاء، تنغيم موجتي الاشارة والضخ على الامتصاص ومعامل الانكسار. وجد انه عند قدرة ضخ محددة يظهر شباك الشفافية. مع زيادة قدرة الضخ يتسع شباك الشفافية بينما يقل الامتصاص. نفس التصرف شوهد ايضا عند تناقص نسبة الانديوم في الطبقة الرطبة.كما شوهد تاثير قوي للعرض المتجانس للخط. في الجزء الثالث من الدراسة تمت دراسة ابطاء الضوء، حيث تمت دراسة المعاملات التي اثرت على الجزء الثاني من هذه الدراسة. لقد وجد انه عند قدرة محددة يمكن ابطاء الضوء باكبر قدر ممكن. من ثم تقل مقدرة ابطاء الضوء عند زيادة قدرة الضخ. لقد وجد ان العمل عند بعض قيم عرض الخط المتجانس مناسبة للتطبيقات البصرية كليا". لقد وجد ان تقليل نسبة الانديوم تقلل مقادير ابطاء الضوء. في الجزء الرابع تم اشتقاق التاثيرية اللاخطية للنظام النقطي الكمي ذي ثلاث مستويات، اعتمادا" على نظرية مصفوفة الكثافة. تم حساب الامتصاص الكلي (الخطي واللاخطي) للتراكيب موضوع الدراسة. لقد وجد ان الطاقة المطلوبة لكي تظهر الفجوة الطيفية تقل مع انخفاض نسبة الانديوم. | The ability to manipulate the speed of light has recently become one of the most exciting emergent topics in optics. This thesis presents the study of slow light in quantum dot (QD) semiconductor nanostructures depending on their predicted properties. InGaAs/In1 - xGaxAsyP1 - y/InP QD system is used as a subject of this study. This is due to their spectral characteristics, where one can work at (1.55µm) the wavelength of optical communications. Electromagnetically induced transparency is used to slow light in this study which can be divided into the following parts. In part one, assuming a disc shaped of the QDs, an InGaAs/In1 - xGaxAsyP1 - y/InP QD system is studied theoretically for mole fractions x = 0.1, 0.2 and 0.39 at (14, 3.5), (14, 6.5) and (30, 8) nm respectively, for (radius and height) of the quantum disc. Bessel functions are used to describe wave functions. Then, the energy levels are calculated in the disc - plane and height. Different sizes (radius and height) for x = 0.1 mole fraction are studied.Depending on the energy level calculations, the linear susceptibility of these three - level QD systems is studied theoretical calculated in part two. Effect of parameters like : Wetting Layer composition, pump power, homogeneous linewidth, dephasing rate, and signal (and pump) detuning on the absorption and refractive index are studied. It is found that at certain pump power the transparency window appears. With increasing pumping power the transparency window is widened while the absorption is reduced. This behavior is also seen with reducing In - mole fraction in the WL. Strong effect of homogeneous broadening is also seen. In part three, the slow light is studied, where the parameters affecting on part two is also studied here. It is found that at certain pump power the slow light gets maximum value 1.4x10 - 5 W/cm2. Then it is reduced with increasing power. Work at some homogenous linewidths is found to be adequate in all - optical applications. Reducing In - mole fraction is shown to reduce slow light values. While high values are gotten for structures with smaller size. Values of storage time are then deduced for structures under study. Parts two and three are included in chapter three of this thesis.In part four, the non - linear susceptibility for a three - level QD system is derived based on the density matrix theory. The total absorption (linear and non - linear) is then calculated for the structures under study. It is found that the power required to be the spectral - hole appear is reduced with decreasing In - mole fraction.

برامج حاسوبية لدراسة خواص العدسات الالكترونية المغناطيسية Computer Programs for Investigating the Properties of Magnetic Electron lenses

اسم المؤلف: ماجد ريسان البحرانــي
اسم المشرف: انعام سامي حمدي امال محمد الحلو
الموضوع العام: علوم الفيزياء
السنة: 2004
الموضوع الدقيق: فيزياء الالكترونيات
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا البحث تحويل اربعة برامج كتبت بلغة الفورتران الى لغة الفيجول بيسك لايجاد الخواص البؤرية الشيية والمسقطي للعدسات المغناطيسية المشبعة وغير المشبعة. وهذه البرامج هي برنامجSPO لايجاد الجهد العددي للعدسات المغناطيسية غير المشبعة، وبرنامج VPO لايجاد الجهد الاتجاهي للعدسات المغناطيسية غير المشبعة ، وبرنامج SVPO لايجاد الجهد الاتجاهي للعدسات المغناطيسية المشبعة . وقد صممت اربعة عدسات مغناطيسية ثنائية القطب وباقطاب مختلفة لاختبار البرامج باللغتين والعدسات هي الاسطواني ، الاسطواني الناقص ، الكروي ، الكروي الناقص اذ تم مقارنة خواصها مع خواص العدسة ثنائية القطب المخروطي المنشورة في الادبيات. وقد تم الحصول على اعظم قيمة لكثافة الفيض المغناطيسي عند القطب المخروطي ، الاسطواني الناقص ، الكروي الناقص على التوالي بالنسبةللبرامج SPO SVPO , VPO ,. وكذلك تم تحويل برنامجي PRO، OBJلحساب الخواص البؤرية المسقطية والشيئية على التوالي للعدسات المغناطيسية وبمختلف الاشكال الهندسية للاقطاب . وعند مقارنة نتائج برامج الفيجول بيسك مـع نتائج برامج الفورتران تبين انها متطابقة تماما . وعند حساب الخواص البؤرية المسقطية للاقطاب الخمسة ظهر ان شكل القطب لايؤثر تاثيرا كبيرا على تلك الصفات . وقد تبين ان افضل الخواص الشيئية للعدسات غير المشبعة الخمسة فهي العدسة المغناطيسية الثنائية ذات القطب الاسطواني الناقص .بينما في حالة الخواص البؤرية الشيئية للعدسات المشبعة فان اقل قيمة للبعد البؤري fo ومعامل الزيغ اللوني Cc ظهرت في العدسة ذات القطب الكروي واقل قيمة لمعامل الزيغ الكرويCs ظهرت في العدسة ذات القطب الاسطواني . | In the present investigation, the language of four Computer programs written in Fortran had been changed to Visual Basic to determine the optical properties of saturated and unsaturated magnetic electron lenses. These programs are program SPO for determining the scalar potential of unsaturated magnetic lenses, program VPO for determining the vector potential of unsaturated magnetic lenses, program SVPO for determining the vector potential of saturated magnetic lenses. In order to test the programs in both languages, four double polepiece magnetic lenses have been designed. The polepiece are of different geometries, namely, the cylindrical, tapered cylindrical, the spherical, and the tapered spherical .Their properties have been compared with those of a conical double polepiece magnetic lenses that have been published in the literature. The highest value of magnetic flux density was found at the conical polepiece , tapered cylindrical polepiece , tapered spherical polepiece respectively respect to programs SPO , VPO , SVPO .as will as investigation programs OBJ and PRO have been used for computing the objective and projector focal properties of the magnetic lenses with different polepiece . An excellent agreement was found when the results of the Visual Basic were compared with those of Fortran . It has also been found that the polepiece shape has a very little effect on the projector properties of the five polepiece and the five lenses. The double polepiece magnetic lens with tapered cylindrical polepiece has shown the most favorable objective properties among the five unsaturated lenses. However, among the five saturated lenses , the lowest value of the focal length and chromatic aberration coefficient were found in the lens with spherical polepiece, and the lowest value of the spherical aberration coefficient was found in the lens with cylindrical polepiece

تـمـيـيز الـبلازما في مـعـجـل سـكـة كهـرومغـناطـيسي مـسـتمر Characterization of Plasma in D.C. Electromagnetic Rail Accelerator

اسم المؤلف: لطـفي مـجـيد مـحـمد صالـح
اسم المشرف: مهدي هادي جاسم صباح توفــيـق احــمــد
الموضوع العام: علوم الفيزياء
السنة: 2004
الموضوع الدقيق: فيزياء البلازما
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: فـي هـــذا البـحـث تـم اسـتـخــدام معـجـــل ســـكـة كـهــرومغــــناطـيـــسي بابـعاد (10x10 mm2 ) ، ذو تجـويـف مربـع وبطـول ( 2 m ) ومجـهز بطاقـة ( 60 kJ ) عـبـر مجامـيع متـسـعات ذات سـعة كـلـية (mF 133) ، وتعـمل ضـمـن جـهـد (750 - 1000 V ) والتـيار النـبـضي الخارج بحــدود (kA 70 ) ، اسـتـخدمت هـذه المـعـلـمات لحـساب ممـيزات البـلازما كـدالــة لكـتـلـتـها داخــل مـعـجـل الـســكة .افـترض ان تـكــون التـوصـيلـية مـنـتـظـمة للـبلازما وان تـكــون الـبلازما مـتايـنــة كـلـيا ، عـنـد حـدوث عـمـلــية فـصل الشـحــنات في حافات الـبلازما فان القـذيـفــة الـمـوجـــودة فـي مــقـدمــــة الـبلازما تــتـعـجــل بـفــعـل قــوة لـورنـز (Lorentz Force ) ( ) ، حـيــث انـه هـنالـك جــزء مـن مـتــجـه الـتـيار مـواز لاتـجاه الـتــعـجــيل . تـم تـحـديــد خـصائـص الـبلازما من خــلال حـلـول انـية لمـعادلات حـفـظ الكــتـلة وحـفـظ الطاقــة وحـفـظ الـزخــم ، بالاضافــة الى حـلـول مـعادلــة ساها ( Saha Equation ) ، وبـذلـك لـوحـظ عـلاقــة تـغـيرها مـع كـتـلــة الـبلازما ، وان الحالــة المـتـعادلــة تـحـدث عـنـدما تـتـساوى الطاقــة المـتـبـددة في الـبلازما بـشـكل حـرارة اومـيــة ( I2RP ) بالطاقة الحـــراريـة المـفــقـــودة مــن الـبــلازما فــي درجــــة حــرارة ( 16500 oK ) ، وان نـــســــبة ( 62% ) من الـبلازما قــد تايـنـت ، لـذلـك فان افـتـراض الـتايـن الاحادي للـبلازما قــد تـحـقــق . تــم قــياس الـســرعـــة الـنـهائـيـــة لـقــذيـــفــــة تــزن ( 1 g ) فوجــدت مـــساويـة لـ ( 1070 m/sec ) تـقـريـبا ، والـتي هـي اقــل مـن الحـساب النـظـري ( 1101 m/sec ) في زمـن قـــدره ( 1.9 msec ) . تـمـت المـقارنــة مـع تجارب الاخــريـن والـتـي تـتــضـمـن ضـعـف قـيــمة الـتــيار والـطاقـــة الـتـي اسـتـخــدمـت فـي البـحــث وذلــك لـعـــدم تــوفــر ابـحاث مــنـشــورة بـطاقــة مـقاربـة للـمـقارنـــة . | In the present work an EM. Railgun is considered the dimension of (10x10 mm2) with square bore of length two meters, powered of (60 kJ) by capacitor banks (133 mF) and operated at (750 - 1000) volt. The output pulse current measured is about (70 kA), used to evaluate the plasma characteristics as a function of plasma mass inside the Railgun. The plasma conductivity is assumed to be uniform and to be fully ionized; when charge separation occurs at the edges of plasma, the projectile is located ahead of plasma armature which is accelerated by Lorentz force ( x ), indicating that there is a small component of current parallel to the direction of acceleration. The plasma parameters are determined by a simultaneous solution of the conservation of mass, momentum and energy equation together with Saha equation, so that the relationship with the plasma mass are satisfied, and the equilibrium condition occurs when the energy dissipated in the plasma by ohmic heating (I2RP) balanced by the heat loose from the plasma at a temperature of (16500 oK) and (62%) of the plasma ionized, therefore, the assumption of singly ionized plasma is justified. The muzzle velocity of (1 g) projectile is measured approximately to be (1070 m/sec) which is less than the theoretical calculation (1101 m/sec) at (1.9 msec). The comparison with other experiments have been described where the current and the energy powered are two times the present work and more; because of unlucky findings, interested energy being published to be compared with present work

تصحيح القشرة وبلوخ العكسي المحسوبة من نظريات قدرة الايقاف لبور وبيتا

اسم المؤلف: كريم سهيل نجم عبد الله
اسم المشرف: رياض خليل احمد العاني
الموضوع العام: علوم الفيزياء
السنة: 2010
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا لبحث وضع الافكار النظرية الاساسية لحساب تصحيح القشرة باستعمال الانموذج الكمي(Bethe,1930 ) والانموذج الكلاسيكي( Bohr,1913) باستعمال النظرية الحركية(K.T. )Kinetic theory، انموذج المتذبذب التوافقي (H.O.)Harmonic Oscillator ، انموذج الغاز الالكتروني الحر (F.E.G ) Free Electron Gas model، والمعالجة الكلاسيكية للتصادمات القريبة والبعيدة للبروتونات في الاهداف الصلبة(Al,C,Si ) مع تاثير التبادل. حيث لاحظنا ان تصحيح القشرة في نظرية بور اكبر من تصحيح القشرة في نظرية بيـتا. كذالك تم حساب تصحيح القشرة للاغلفة الثانوية وتصحيح القشرة الكلي للبروتونات في الاهداف الصلبة(Al,C,Si) مع تاثير التبادل. تم في هذا البحث اجراء دراسة نظرية لحساب عدد الايقاف في نظرية بيتا للبروتونات في الاهداف الصلبة ((Al,C,Si مع تاثير التبادل بواسطة النماذج الذرية الثلاث (K.T., H.O., F.E.G). ففي العمل الحالي قمنا باجراء دراسة نظرية حول حساب عدد الايقاف وتصحيح بلوخ العكسي باستعمال النظرية الثنائية(B.T) في السرع الواطئة للبروتونات في السليكون مع تاثير التبادل وذالك لان تصحيح بلوخ العكسي يعتبر من التصحيحات المهمة لما له من اهمية في عملية الانتقال السلس ما بين المناطق ذات السرع الواطئة ( المناطق الكلاسيكية) والمناطق ذات السرع العالية(المناطق الكمية ). تم كتابة البرنامج الرئيسي(K.ube) بلغة الفورتران(Fortran 90) الذي تضمن كل الحسابات التقريبية والمباشرة للمعلمات اعلاه.

دراسة تاثير التركيزعلى الكفاءة الكمية لصبغة الفثالوسيانين - نحاس CuPc Study of the effect of concentration on the quantum efficiency of copper - Phthalocyanine dye (CuPc

اسم المؤلف: كاترين كاظم شنشل
اسم المشرف: محمد تقي حسين صبري جاسم لفتة
الموضوع العام: علوم الفيزياء
السنة: 2010
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: لقد تمت دراسة اطياف الامتصاص والفلورة للصبغة العضوية نوع الفثالوسيانين - نحاس(CuPc) في المذيب الدايوكسان, وتحت ظروف طبيعية عن(درجة حرارة الغرفة) وللتراكيز الثلاثة (5x10 - 5 , 1x10 - 4 , 2x10 - 4) مولاري. ان الشدة النسبية لطيفي الامتصاص والفلورة تزداد مع زيادة التركيز وهذا ينطبق مع قانون بير - لامبرت. ان جزيئة الفثالوسيانين((CuPc تمتلك حزمتي امتصاص في المنطقة المرئية وفوق البنفسجية من الطيف,حزمة الطاقة العالية تقع عند حوالي 350 نانومتر,وتعرف عموما باسم حزمة - B.بينما حزمة الطاقة الواطئة فتقع عند حوالي 650 نانومتر,وتعرف عموما باسم حزمة - Q.وقد بينت النتائج تاثير نقصان التركيز في ازاحة اطياف الامتصاص والفلورة الى الاطوال الموجية القصيرة .(Blue Shift) كانت كفاءة الكمية لـ (CuPc) عند التركيز الاول (2x10 - 4) مولاري في منطقة UV/visible 52%) و59%) على التوالي, وزمن العمر الاشعاعي (2.5071 و3.1802) نانوثانية وزمن عمر الفلورة (1.3036و 8763.1) نانوثانية على التوالي, وكانت كفاءة الكمية عند التركيز الثاني (1x10 - 4) مولاري 73%) و65%) وزمن العمر الاشعاعي (5.1426 و5.9717) نانوثانية وزمن عمر الفلورة (7540. 3 3.8816) نانوثانية وعلى التوالي, وكانت كفاءة الكمية عند التركيز الثالث (5x10 - 5) مولاري 83%) و74%) وزمن العمر الاشعاعي (6.2593 و7.6244) نانوثانية وزمن عمر الفلورة (5.1952 و5.6420) نانوثانية وعلى التوالي. دلت الدراسة لاطياف الامتصاص والفلورة للصبغة العضوية (CuPc) بان علاقة الكفاءة الكمية تتناسب عكسيا مع زيادة التركيز | The Absorption and Fluorescence spectra have been studied for organic dye Copper - phthalocyanine (CuPc) in solvent Dioxane separately under normal circumstances at (room temperature) for three concentration (2x10 - 4, 1x10 - 4, 5x10 - 5) M. The intensities of the absorption and fluorescence spectra are increasing with the increase of the concentration which agrees with Beer - Lambert Law. Phthalocyanine molecules (CuPc) have two absorption bands in the visible and ultraviolet region of the spectrum. The higher energy band, occurring at around 350 nm, is generally known as the B - band. The lower energy band, occurring at around 650nm, is generally known as the Q - band. The measurement shows that the Absorption and Fluorescence spectrum have shifted to short wavelengths (Blue Shift). The quantum efficiency of (CuPc) at (2x10 - 4 M) in UV/visible region is (qFM = 52% & 59%) respectively. While the radiative life time is (tFM = 2.5071 ns & 3.1802 ns) and the fluorescence life time is (tF = 1.3036 ns & 1.8763 ns) respectively. For the second concentration (1x10 - 4 M) is (qFM = 73% & 65%), (tFM = 5.1426 ns & 5.9717 ns) and (tF = 3.7540 ns & 3.8816 ns). For the third concentration (5x10 - 5 M) is (qFM = 83% & 74%) (tFM = 6.2593 ns & 7.6244 ns) and (tF = 5.1952 ns & 5.6420 ns).The quantum efficiency results appear to be increase with decreasing concentration.

المقاطع العرضية للانوية المركبة المتكونة من تفاعلات (n,p) و(p,n)

اسم المؤلف: فردوس سامي حسين الياسري
اسم المشرف: ايمان طارق العلوي
الموضوع العام: علوم الفيزياء
السنة: 2010
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The cross sections for (p,n) and (n,p) reactions were calculated according to the available International Atomic Energy Agency (IAEA) libraries and other experimental published data. The well known international libraries like EXFOR, ENDF, JENDL, JEF, JEFF, BROND, CENDL, contain some cross sections measured during the period from the middle of the last century up to several years ago.This study is concerned with the nuclear reactions used in the production of the protons or neutrons, which are important in shielding calculations, accelerators and proton therapy.The analyzing of a complete energy range has been done starting from threshold energy for each reaction. The cross sections are reproduced in fine steps of incident proton or neutron energy in 0.01 MeV intervals with their corresponding errors. The adopted cross sections for all available experimental data have been calculated for all the considered reactions. A mathematical representative equation for all these reactions is formulated. These equations represent the variation of the cross section with energy, which could be used to predict the values of uncalculated cross sections.The cross sections of light elements like Tritium , Helium , Lithium isotopes ,Berlium , Boron isotopes , Carbon , Nitrogen , Oxigen , Alaminum , Silinum isotopes , , , and Phosfor in specific reactions were considered. The calculation of the adopted values for (p,n) and (n,p) reactions have been done and compared with international libraries which give good agreements.The (n,p) reactions cross sections values are derived from the data of (p,n) reactions and visa versa as a function of neutron or proton energy, respectively, by using the reciprocity theory and the principle of reverse reactions for the ground state.The stopping power according to Zeigler formulae was used in order to obtain the neutron yield for each reaction. Q - value, threshold energy, binding energy, compound nucleus cross sections, transmitted wavelength and the probability of occurrence of the reaction have been also calculated.The programmes of adopt.m, reverse.m, stop.m, yield.m, and cnpw.m have been built for the first time in the present work using Matlab 7.0 to calculate the results of the present work, as well as SRIM (2003) program.The evalutated (p,n) and (n,p) cross sections which are used for the first time, in spite of the numerous data available, a limited number of studies concerning the light elements with very small half life are still very important in nuclear technology. They prove that our calculated values are in good agreement with the published data.

تاثير الربط والعزل على المقطع العرضي للايقاف الالكتروني

اسم المؤلف: غفران محمد علوان
اسم المشرف: خالد عبد الوهاب احمد
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: فيزياء الالكترونيات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم عمل صيغة رياضية نظرية لدراسة وحساب تاثير الربط والعزل على المقطع العرضي لقدرة الايقاف الالكترونية عن طريق اخذ ايونات ذات عدد ذري (Z1 > 2) مثل ( O, C, B ) في اهداف من (Al, C, Si) باستعمال ثلاثة انواع من الجهود المؤثرة Veff (Yukawa, Moliere and Universal) ولنوعين من الايونات هي (Stripped, Screened) وتم الحصول على النتائج بالاعتماد على النظرية الثنائية. تمت دراسة قدرة الايقاف بالاعتماد على نوعين من التصادمات، التصادمات القريبة التي تعامل كتفاعلات كولوم الحرة، والناتجة من اعتماد الطاقة المنتقلة ازاء معامل التصادم، والتصادمات البعيدة التي تاخذ في حساباتها طاقة الربط لالكترونات الهدف وذلك عبر التردد الرنيني الكلاسيكي.وبالاعتماد على عامل بور كاباK_B=(2Z_1 v_0)⁄v فقد وجد ان هناك اتساع لحدود نظرية بور عند السرع الواطئة . ان النظرية الثنائية هي تحديث مهم لنظرية بور القديمة، وقد طورت لحساب قدرة الايقاف للايونات الاثقل من الهيليوم في النظام الكلاسيكي. وتم في العمل الحالي حساب المقطع العرضي للايقاف لبعض الايونات الساقطة على الهدف ومقارنة هذه النتائج مع البيانات العملية من برنامج الـ(SRIM2003) المنجزة من قبل Ziegler. وجد ان زاوية التشتت وزمن التصادم دورا مهما في حساب المقطع العرضي للايقاف باستعمال النظرية الثنائية. تم استخدام ثلاث انواع من الجهود في العمل الحالي (Yukawa, Moliere and Universal) لمعرفة تاثير دالة الحاجز φ (r/a) على زمن التصادم وزاوية التشتت. ووجد ان اكبر تاثير ياتي عند مؤثرات التصادم العالية x = ωp/υ ≥1. كما تبين ان النظرية الثنائية لها قابلية التطبيق على مدى واسع من الطاقات عكس الطرق السابقة التي كانت محدودة الطاقات. وقد اعطت الحسابات وفقا للنظرية الثنائية نتائج تقريبية وبدون تحديد لمعامل التصادم الحرج (p_(0 )) بين التصادمات القريبة والتصادمات البعيدة وتفادي تطبيقات نظرية الاضطراب. تم في عملنا هذا كتابة برنامجين بلغة فورتران 90 بمساعدة Compaq Visual Fortran (CVF6.6) لتنفيذه. | A theoretical form for studying and calculating Binding and screening effects of electronic stopping cross - section has been done by taking (Z1>2) like (O, C, B) ions in (Al, C and Si) targets using three types of effective potential Veff (Yukawa, Moliere and Universal) for Stripped and Screened ions. The application of these potentials was done by using Binary’s theory. The stopping power has taken into consideration for the two types of collisions; Close collisions are treated as free - coulomb interactions, resulting in the dependence of the energy transfer versus impact parameter, and the distant collisions are taking into account the binding of target electrons and enter through a classical resonance frequency. At low velocity should be extended to Bohr’s theory are found to be dependent on the factor Bohr Kappa ( The Binary theory is a powerful update of the old Bohr theory. It has been developed to calculate the stopping power of the ions heavier than helium in the classical regime. In the present work, the calculated stopping cross sections for some incident ions in targets are compared with experimental data from SRIM2003 software presented by Ziegler. Scattering angle and time integral play an important role in calculating stopping cross - section when using binary theory. In the present work the three types of potential (Yukawa, Moliere and Universal) have been used to investigate the effects of screening functions φ (r/a) on time integral and scattering angle. Most effect comes at high impact parameters χ = ωp/υ ≥1. The Binary’s theory is applicable for all energy range while the previous work is limited in energy range. Binary theory gives an accurate results with no need to specify critical point ( between close and distant collisions, and application of perturbation theory is avoided. Two programs have been written in Fortran 90 with the aid of Compaq Visual Fortran (CVF 6.6) for executing.

تاثيرات الاشعاع على الخصائص البصرية لاغشية صبغة مثيلين ازرق المطعمة بpva Radiation Effects on Optical Properties of Methylene Blue Dye Doped PVA Films

اسم المؤلف: عمار نجم عبد
اسم المشرف: محاسن فاضل هادي الكاظمي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: اجري هذا البحث على مرحلتين, الاولى هي دراسة الخصائص البصرية والتركيبية لاغشية صبغة المثلين الازرق(Methylene blue) المطعمة ببوليمر بولي فينيل الكحول(PVA) وبنسب تطعيم مختلفة وهي (10, 15, 20, 30, 40) مل من محلول الصبغة وبتركيز(1*10 - 5) مول/لتر. كل النماذج حضرت بطريقة الصب والمرحلة الثانية هي تشعيع هذه الاغشية باشعة كاما وبيتا وبجرع مختلفة ودراسة تاثير انواع التشعيع على الخصائص البصرية والتركيبية لها.حيث وجد ان طيف الامتصاص يزداد بزيادة نسب التطعيم لكل من قمتي الصبغة والبوليمر مع وجود ازاحة باتجاه الاطوال الموجية الاطول (ازاحة حمراء), وتم دراسة فجوة الطاقة البصرية ووجد ان فجوة الطاقة الطاقة للبوليمر تتناقص مع زيادة نسب التطعيم مع ثبات فجوة الطاقة للصبغة وقد تم دراسة الثوابت البصرية الاخرى والتي تشمل (معامل الامتصاص, معامل الخمود, معامل الانكسار, وثابت العزل الكهربائي الحقيقي والخيالي).بعد تشعيع غشاء البوليمر النقي واغشية الصبغة المطعمة بالبوليمر ولمختلف نسب التطعيم باشعة كاما وجسيمات بيتا وجد ان هناك زيادة ملحوضة لطيف امتصاص البوليمر النقي بينما طيف الامتصاص هذا يتناقص لاغشية الصبغة المطعمة بالبوليمر وتعاني ازاحة باتجاه الاطوال الموجية الاصغر (ازاحة زرقاء) مع بقاء قمة امتصاص البوليمر على حالها, اما فجوة الطاقة فقد تناقصت بعد التشعيع للبوليمر وازدادت للصبغة لمختلف الاغشية وقد تم دراسة الثوابت البصرية الاخرى والتي تشمل (معامل الامتصاص, معامل الخمود, معامل الانكسار, وثابت العزل الكهربائي الحقيقي والخيالي).اما الفحوصات التركيبية فقد بين كل من حيود الاشعة السينية (XRD) وطيف (FTIR) عدم وجود تفاعل كيميائي بين الصبغة والبوليمر بعد الخلط وعدم تكسر الاواصر الاساسية لهما بعد التشعيع, واظهرت صور (FESEM) تعرض سطح البوليمر للتكسر وازدادت خشونتة بعد التشعيع بينما لم تتاثر كثيرا سطوح الاغشيه المطعمة من الصبغة والبوليمر بالتشعيع | The present work was carried out in two stages .The first stage was studying the optical and structural properties for methylene blue dye doped poly vinyl alcohol as a host polymer in different doping ratio of dye solution (10, 15, 20, 30, 50) ml with concentration of dye (1×10 - 5) mol/liter. All samples prepared by casting method. The second stage was irradiated all samples by Gamma ray and Beta particles in different doses and studying the optical and structural properties for them. The intensity of absorption spectrum increased with increasing doping ratio of dye solution for peaks of dye and polymer and gave red shift. The optical energy gap for PVA increased with increasing doping ratio of dye solution with remaind the energy gap for dye constant. The optical constants (Absorption coefficient, Extinction coefficient, Refractive index, Real and imaginary dielectric constants) was studied. After Gamma and Beta irradiation pure PVA film and MB/PVA films with different doping ratio of dye solution and found that the absorption spectrum increased for pure polymer, while the absorption spectrum for dye is decreased for MB/PVA films and gave blue shift with remained the absorption peak of polymer constant. The optical energy gap for PVA decreased whereas the energy gap for dye increased after irradiation. The optical constants (Absorption coefficient, Extinction coefficient, Refractive index, Real and imaginary dielectric constants) was studied. The XRD and FTIR showed no interaction between dye and polymer after doping and there are no broken fundamental bands after irradiation. FESEM photographs illustrated that the surface of all films became more roughness after irradiation.

دراسة تاثير المضاف 2 - ميثيل نفثالين على نظام اروماتي (انثراسين / 2 - ميثيل نفثالين) Study of doping effect of 2 - Methylnaphthallen in aromatic system (2 - Methylnaphthallen/Anthracene )

اسم المؤلف: علي كاظم وداي
اسم المشرف: زياد عدنان صالح
الموضوع العام: علوم الفيزياء
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا البحث, اخذ اطياف الفلورة للانثراسين المذاب في دايا ميثيل سلفوكسايد بالتركيزين M] [10 - 3,[10 - 4 M] حيث اظهر اربع حزم اهتزازية واضحة وقد تم تهييجه بطول موجي هو 365nm)) وكذلك تم اخذ طيف ثنائي ميثيل نفثالين النقي المذاب في دايا ميثيل سلفوكسايد وقد اظهر ثلاث حزم اهتزازية وقد تم تهييجه بطول موجي هو (270nm). وقد تمت هذه القياسات بدرجة حرارة الغرفة.اظهرت قياس اطياف الامتصاص والفلورة لمحلول الانثراسين المشوب بثنائي ميثيل نفثالين بنسب مختلفة, بتراكيز مولارية مختلفة تبدء من [10 - 3M] الى [10 - 4M] وبطول مهيج (270nm). واظهرت قياسات اطياف هذه المحاليل تبادلا للشحنة الذي يقود الى انتقال للطاقة من جزيئة المضاف ثنائي ميثيل نفثالين الى جزيئة المضيف الانثراسين باطياف الفلورة عند التراكيز اعلاه. تقود هذه النتائج الى تناقص نسبة انتقال الطاقة المحددة من خلال طريقة ميكانيكية تبادل الالكترون. هذا الانخفاض له عدة اسباب منها وجود الفخاخ (traps) والى الامتصاص الذاتي القوي لبلورة الانثراسين .ان ظهور حافة حادة في طيف الفلورة لجزيئة المضاف (2mn) يشير الى وجود امتصاص ذاتي قوي لطيف هذه الجزيئة مما يؤثر على معدل انتقال الطاقة كما اظهرت النتائج تزايد عامل الكبت مع تزايد التركيز .و يتبين من دراستنا للخصائص الكهربائية والتوصيلة الكهربائية هذه لوجود طاقاتي تنشيط لجزيئة الانثراسين المشوبة بنسب مختلفة من جزيئة ثنائي ميثيل نفثالين ولكل طاقة تنشيط ميكانيكية توصيل مختلفة والمحضرة على الواح كوارتز والزجاج على حد سواء وبتركيز مولاري [5*10 - 2 M], التي يمكن تفسيرها بالاعتماد على نظرية الحزم لشبه الموصل والتي تقترح انتقال حاملات الشحنة من مستوى فيرمي المانح الى حزمة التوصيل في شبه الموصل السالب (n - type) عند درجات الحرارة العالية بواسطة التهيج الحراري . معلمات تركيب الشبيكة للاغشية الرقيقة للانثراسين المشوب بثنائي ميثيل نفثالين التي حللت بواسطة (a LabX XRD 6000 SHIMADZU XR - Diffractometer with Cu Kα radiation) , يظهر تاثير التشويب على الافلام الرقيقة للانثراسين بشكل واضحا. وتم الحصول على نمط الحيود بزاوية (2θ) وتبدء من (20°) الى (60°) وبزاوية مجسمة مقدارها (5°) . وكلاهما ثنائي ميثيل نفثالين المضاف الى الانثراسين كشائبة يظهر طيف حيود الاشعة السينية عمليا قمة حاده وقمتان صغيرتان, وهذا يعني لنا ان الاغشية الرقيقة ذات طبيعة تركيبية متعددة التبلور. | In this research, The fluorescence spectrum of Anthracene dissolved in dimethylslfoxayd was studied then showed four obvious vibrated bands ) λex=365nm). Moreover, the spectrum of pure (2 - Methylnaphthalene) dissolved in dimethylslfoxayd was dealt with and it showed three vibrated bands and it has taken at a wavelength (λex=270nm). The measurements was at the room temperature. The absorption and fluorescence spectra of solutions for anthracene doped with 2 - Methylnaphthalene with different ratios, had been measured with different molarity concentrations starting from the [10 - 3M] to [10 - 4M] and at excited wavelength) λex= 270 nm). The measurements of these solutions spectra showed the electron exchange, which led to the energy transfer from the guest (2 - Methylnaphthalene) to the host (Anthracene) with getting fluorescence at the above concentrations. The results led to a decrease in the rate of the energy transfer calculated in the way of energy transfer through mechanical electron exchange. This decline has several causes including the existence of (traps) and to the strong self - absorption of the anthracene crystal.The appearance of a sharp edge in the fluorescence spectrum of the guest (2 - methyl naphthalene) molecule indicates a strong self - absorption spectrum of this molecule which affects on the rate of energy transfer. Also, the results showed the increasing of the quenching factor with the increasing of the concentration.This study shows the presence of energies activation Anthracene doping different proportions of 2 - Methylnaphthalene which were prepared on a substrate of glass and quartz are both which have been used at molarity concentration [5*10 - 2M]. Each activation energy has different mechanical connecting which could be interpreted by relying on the bands theory of semiconductor which proposes a transition charge which carriers from the fermi donor to the conduction band in the semiconductor negative (n - type) at high temperatures by thermal excitation.The structure and lattice parameters of anthracene dopant 2 - Methylnaphthalene thin films were analyzed by a LabX XRD 6000 SHIMADZU XR - Diffractometer with Cu Kα radiation. The effect of the Anthracene dopant on the structure of the film is clear. Diffraction pattern was obtained with 2θ starting from 20° to 60° at 5° solid angle. In both the as - deposited and Anthracene - doped 2 - Methylnaphthalene thin films, the X - ray diffraction spectra possess one sharp and two small peaks. It means that the film is polycrystalline in nature structure

معدل التقشر ومتانة الانحناء لمتراكبات ثنائي هيدروكسي بنزين (هيدروكوينون) المدعمة بالالياف Ablative Rate and Bending Strength of Fibers Reinforced Dihydroxy - Benzene(Hydroquinone) Composites

اسم المؤلف: علي زامل منشد
اسم المشرف: بهجت بهلول كاظم
الموضوع العام: علوم الفيزياء
السنة: 2009
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم دراسة معدل التقشر ، التوصيلية الحرارية، متانة الانحناء،و صلادة فيكرز لمتراكبات الفينول نوع ثنائي هيدروكسي بنزين مدعمة بالياف مختلفة (الياف زجاجية نوع E على شكل حصيرة والياف كاربونية مستمرة)،وبنسب حجمية(0%،20%،40%،60%،70%) بدلالة الخواص الحرارية والميكانيكية لتغيرات الكسر الحجمي للالياف.المتراكبات التي خضعت للاختبار كانت مجموعتين هي EGFC، CFC، بالاضافة لمادة الفينول نوع هيدروكوينون(ثنائي هيدروكسي بنزين)HQR. تم استخدام تقنية الكبس الحار لتحضير المتراكبات باستخدام القوالب المارقة تحت الظروف القياسية.استعملت تقنية قرص لي لقياس التوصيلية الحرارية حسب المواصفة البريطانية القياسية لشركة جورج وكرفيه المحدودة. استخدمت تقنية الشعلة الا وكسي - استيلينية لتحديد معدل التقشر وكذلك معامل العزل الحراري حسب المواصفة القياسية ASTM - E285 - 80. وتم استخدام ماكنة Instron لحساب متانة الانحناء حسب المواصفة القياسية ASTM D - 790.واستعمل جهاز الصلادة المجهرية لفيكرز لحساب الصلادة وحسب المواصف القياسية ASTM E92 - 82 . نفذت المحاكاة لحساب معدل التقشر بثلاث ابعاد باستخدام طريقة الفروقات المحددة. اظهرت النتائج بان التوصيلية الحرارية تزداد تصاعديا بتعاقب النسبة المئوية الحجمية للالياف. من خلال النتائج النظرية لاختبار التوصيلية الحرارية التي حسبت من خلال مود يل micro structures وعند مقارنتها مع النتائج العملية تبين القيم النظرية ان هناك تقارب مع النتائج العملية. يسلك معدل التقشر سلوك معاكس حيث يكون اوطا قيمة عند اعلى نسبة مئوية حجمية للالياف ، وتبين العلاقة بين التوصيلية الحرارية ومعدل التقشر اليتين متزاملتين، الاولى مع بداية الاختبار والمميزة بتوزيع مثالي للالياف الذي يدل على الية التشتيت الحراري بالالياف بسبب تكون شبكة من مسارات التوصيلية الحرارية، والثانية التي ترافق اختبار التقشر والمميزة بمظهر تكون الشروخ القصية التي تدل على الية تكون الفحم المبكرة.كما تبين بان متانةالانحناء تزداد تزايديا خطيا بتعاقب النسبة المئوية الحجمية للالياف ، وتعرض العلاقة بين الكسر الحجمي ومتانة الانحناء بروز الية pull - out ، وقد تبين وجود نوعين من الربط بين المادة الاساس والمضافات هما : الربط الضعيف والربط القوي، كما تبين بان الصلادة تزداد تزايديا خطيا بتعاقب النسبة المئوية الحجمية للالياف.جاءت قيم النتائج للمحاكاة لمعدل التقشر اعلى من قيم النتائج العملية، وقد فسر ذلك على ان درجة حرارة لهب شعلة الاختبار (الاوكسي _ استيلينية) العملية لم تصل الى درجة الحرارة الشعلة المستخدمة نظريا، بالاضافة الى تاثير السطح البيني للمتراكبات الذي كان ذو متانة وقوة ارتباط عالية، وقيم الكثافة للمتراكبات تدل على ذلك. وظفت الصور الفوتوغرافية بالاقتران مع الصور المجهرية والكثافة للمساعدة في تفسير النتائج.يتضح من النتائج العملية بان المتراكبات المستخدمة في هذا البحث ذات الكسور الحجمية العالية يمكن استخدامها في التطبيقات التي تحتاج الى تشتت حراري كبير، مقاومة عالية للتهرئة، متانةانحناء وصلادة عالية. | In this work, thermal conductivity, K, ablation rate, Ar, bending strength, σf, and Vickers hardness VHs for phenolic (phenol - formaldehyde) resin, PFR type hydroquinone HQR reinforced with different fibers (,E - glass, as mat , and carbon fibers, as continuous) have been studied, in terms of thermal and mechanical properties, which are subject to change in different fibers volume fraction.The composites candidates for this work were two groups; E - glass fibers composites (EGFC), carbon fibers composites (CFC), besides, pure matrix phenolic resin PFR type HQR. Hot - press technique was used to prepare the composites as well as hydroquinone specimens using flash molds at standard conditions.Lee’s disk technique was used to measure thermal conductivity. Oxy - acetylene flame technique was used to determine ablation rate as well as thermal insulator index according to ASTM - E285 - 80. Instron machine was used to measure bending strength according to ASTM - D790.Microhardness Vickers machine was used to determine the hardness according to ASTM - E92 - 82. Simulation programs of heat transfer in three dimensions of ablative test for hydroquinone and hydroquinone composites specimens were carried out using finite difference method.Thermal conductivity results show that K values increase progressively by succession of volume fraction of fibers. Ablation rate behaves inversely, where it drops at high volume fraction of fibers. The thermal conductivity - ablation rate relationship displays two mechanisms. First, associated with the starting of test is recognized by ideal distribution of additives, which leads to thermal dispersion due to the formation of segregated network of thermal conducting paths. Second mechanism is associated with ablation test recognized by shearing cracks appearance, which leads to earlier char production mechanism.Bending strength results show, that σf increases progressively by succession of volume fraction of fibers. The bending strength - volume fraction relationship displays two mechanisms according to the kind of fibers. Where, it can be observed, pullout mechanism with respect to fibers composites. It is shown that there are two kinds of bonding between the matrix and the fibers; weak - bond and strong - bond. The composites were broken through tension down the specimen and compression upper the specimen and shearing fracture mechanism. Hardness Vickers results show that HVs increases progressively by succession of volume fraction of fibers.Ablation simulation results values coming higher than experimental results value. This could be explained as the interface affect of composites, which had high strength and strong bond force, and density values evidence to that.Optical micrographs, coupled with auxiliary microscopy, and densities were employed to aid interpretation of results. The composites under the study can be used in applications, which need high thermal dispersion, high ablation resistance, and high bending strength

تحضير ودراسة الخصائص الفيزيائية والمكانيكية للمادة المرتكبة المحضرة من سيراميك الكودراتيت المدعمة بالنحاس Preparation and study the physical and mechanical properties of Cu reinforced cordierite ceramic composites

اسم المؤلف: علاء رافد علي
اسم المشرف: انوار حسين علي الفؤادي
الموضوع العام: علوم الفيزياء
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: A raw material mixture was used for forming the ceramic matrix cordierite(Cor), was included Iraqi clay (Kaolin Duekhla), Alumina and Talc. Prepare (Cu/Cor) composite, were obtained by addition a fine powder (99.99%) of copper as a reinforcement material, to cordierite ceramic with different percentage ratios (10, 20, 30 and 40) wt%. The temperatures for preparing the composite are (700,800) °C ,and the time of treatment is (1,2) hours respectively. The result of X - ray revealed that the peaks of cordierite phase decreased with increasing the additive amount of copper and slightly increased as temperature elevated from 700 oC to 800oC. Scanning electron microscope (SEM) test was used to observe morphology of blend materials . The comparison results of microphotograph images of cordierite ceramic and (Cu/Cor) composite with 40 wt % Cu , shows that the surface of cordierite sample is uniformly and compactly interference by copper distribution particles led to decreasing the porosity with increasing temperature to 800°C for two hours. The measurement of bulk density and apparent porosity was carried out according to Archimedes method and according to (ASTM) procedure, the results show that the density and thermal conductivity of (Cu /Cor) composite samples increased with increasing copper content ratios up to 40 wt% at the heat treatment (700,800) °C for (1,2) hours respectively. The results of calculation of apparent porosity (Por) and water absorption (%) was shows that, the values were decreased at 800°C more than 700°C ,for two hours more than one hours and at copper content ratio 40% more than (30, 20 and 10) respectively. Vickers micro hardness test is carried out by using "Digital Micro hardness tester VHS 1000. The presence of copper decreases the hardness, in comparison with the untreated ceramic sample(without copper) while the compressive strength increased with the increasing the temperature and copper content ratio from (38) to( 167.8 ) MPa at 800˚C . The addition of copper up to 40% in cordierite matrix lead to decrease of pores and then enhance the densification of (Cu/Cor) composite

التركيب النووي للانوية شديدة التشوه NUCLEAR STRUCTUER OF STRONGLY DEFORMED NUCLEI

اسم المؤلف: عطاء علي حسن
اسم المشرف: ايمان طارق العلوي
الموضوع العام: علوم الفيزياء
السنة: 2009
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم خلال البحث الحالي دراسة التركيب النووي للنوى شديدة التشوه ذات الاعداد الكتلية (A=170,174,182) لكل من الانوية الزوجية - زوجية على التوالي، بعد تحديد التناظر الديناميكي SU(3) لكل نواة، باستخدام نموذج البوزونات المتفاعلة الاول (IBM - 1) حيث تم حساب القيم الذاتية والمتجهات الذاتية باستخدام برنامج (IBS1.for) .وتم ايضا دراسة وحساب طاقة جهد السطح لهذه الانوية باستخدام برنامج (PES.for) ورسم الخطوط الكنتورية والتناظرات المحورية لها والخطوط الشبكية المتعامدة والتي اعطت توافقا جيدا مع المخططات المثالية وتركيب الحزم. وقد تم لاول مرة اشتقاق كل من مؤثرات مؤثر دالة هاملتون والزمر الفرعية للزمرة الوحدوية U(6) والاعداد الكمية للحالات الاساسية للتناظر الديناميكي SU(3) وعدد المولدات (ابعادها) باستخدام جبر لي. وتم حساب احتمالية الانتقالات الكهربائية رباعية القطب B(E2) وحساب قيم عناصر المصفوفة المختزلة لمؤثر الانتقال الكهربائي رباعي القطب والعزوم الكهربائية رباعية القطب (QL) وكذلك حساب الانتقالات المغناطيسية ثنائية القطب B(M1) وحساب قيم عناصر المصفوفة المختزلة لمؤثر الانتقال المغناطيسي وقد استخدمت نتائج حسابات المصفوفة المختزلة لمؤثر الانتقال الكهربائي رباعي القطب والمغناطيسي ثنائي القطب في حساب نسب الخلط (E2/M1) للحصول على معلومات اوفر عن التركيب النووي وقد بينت الحسابات الحالية بان مقدار واشارة نسب الخلط لانتقالات مختلفة اعطت توافقا جيدا مع القيم العملية المتوفرة .وقد تم خلال البحث ايضا حساب الطاقة الدورانية لعزم القصور الذاتي ومعامل الليونة وتقاطع الحزم وظاهرة الانحناء باستخدام نموذج (VMI) وعلاقتها بالزخم الزاوي . وقد تم ايضا حساب معدل الجذر التربيعي لنصف القطر النووي r21/2 ومؤثر اعلومة التشوه رباعي القطب ( ( ومؤثر اعلومة الانحراف ( ) اللذان يصفان التشوهات السطحية والمحورية في النواة وكذلك قمنا بحساب العزوم الكهربائية الذاتية رباعية القطب (Q) الذي يعد اعلومة اخرى من اعلومات التشوه المستخدمة في حساب درجة تشوه هذه الانوية اعتمادا على كل من مؤثرات اعلومات التشوه ( ) , وحساب المحاور النووية للشكل الاهليليجي المتطاول او المفلطح لهذه الانوية شديدة التشوه موضوع البحث. لقد تمت كتابة جميع البرامج بلغة فورتران (Fortran 90) بمساعدة البرنامج التشغيلي Compaq Visual Fortran (CVF6.6). وقد قورنت النتائج الحالية مع القيم العملية المتوفرة فكانت متوافقة بشكل جيد في معظمها | In this work, the nuclear structure has been studied for strongly deformed nuclei with mass number (A=170,174,182) for even - even nuclei respectively using the Interacting Boson Model (IBM - 1). The dynamical symmetry SU(3) has been predicated for each nuclei . Derivation of operators of Hamiltonian operator, subalgebra of unitary group U(16), quantum numbers of bases states of SU(3) dynamical symmetry and the number of generators (Dimensions) using using Lie Algebra have been done. Eigen values and eigen vectors have been calculated using (IBS1.for) program. The potential energy surface for each nuclei has been studies and calculated using (PES.for) program, also contour lines, axially symmetries and mesh grid has been drown. The results have been compared with typical scheme and band structure give a good agreement. The electric quadrupole transition probability B(E2), its reduced matrix element < Lf ║ (E2) ║Li > and the electric quadrupole moments (QL). Also the magnetic dipole transition probability B(M1) and its reduced matrix element < Lf ║ (M1) ║Li > have been calculated. The results of the reduced matrix element of electric quadrupole transition operator and magnetic dipole transition operator have been used to calculate (E2/M1) mixing ratios to get more information about the nuclear structure . The results of the present calculation show that both the magnitude and sign (E2/M1) for different transitions for each nuclei are in agreement with the available experimental values. In this research the rotational energy and the moment of inertial, the softness coefficient; the cross bands; the back bending have been calculated for these nuclei and their dependence on the angular momentum using (VMI) Models and (VMI.for) program. The root mean nuclear radius r21/2 , quadrupole deformation parameter operator and the distortion parameter operator have been calculated to describe the surface and axially deformation in each nuclei using (Defo.for) program. The intrinsic electric quadrupole moment which predict the deformation in each nuclei has been calculated to find the degree of deformation depending on the deformation parameters and to calculate the nuclear axis for the ellipsoidal prolate or oblate shape for the strong deformed nuclei. All programs have been written in Fortran 90 with the aid of Compaq Visual Fortran (CVF 6.6) for doing the calculations. The results of the present work are compared with available experimental data, it was in good agreement in most cases.

تمييز الاهداف عن الخلفية الارضية ذات التماثل الحراري في الحزمتين من الاطوال الموجية [3.5 - 4.1 - µm and 11 - 12 - µm ] Discrimination of targets from background of similar temperature, using two - channel data in the 3.5 - 4.1 - µm and 11 - 12 - µm regions

اسم المؤلف: عدي جواد كاظم
اسم المشرف: بسعاد هادي حمزة
الموضوع العام: علوم الفيزياء
السنة: 2011
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: للتمييز بين هدفين او هدف عن الخلفية الارضية استخدمت طريقتان,طريقة حد العتبة وطريقة التصنيف طريقة الحد الاقصى (MLH). تم حساب ( Wλ ) الانبعاثية الطيفية للهدف والخلفية في درجات حرارة مختلفة(T) في اثنين من الحزم الطيفية وبطول موجي μm (3.5 - 4.1) μm(11.0 - 12.0) . وبرسم العلاقة بين دالة التمييز (DF)كدالة لانبعاثية الهدف (target emissivity (εA)) للحزمة وكدالة لدرجات حرارة الهدف. من هذا العمل, التمييز بين الهدف والخلفية الارضية تحت الظروف الجوية المحددة المستخدمة في الموديل الرياضي للحسابات يبين جدوى امكانية كشف الاهداف المختلفة عن الخلفية الارضية بفارق حراري صغير نسبيا.ان تمييز الاهداف بطريقة الكشف الحراري باللاشعة تحت الحمراء يتم من خلال استخدام طريقة حد العتبة والتي تعالج مشكلة الكشف عن الاهداف التي تكون قريبة لدرجة حرارة المحيط ,وذلك بنمذجة الخلفية وباستخدام الموديل الرياضي كقاعدة لتطوير وفهم العمليات الفيزيائية واختلافاتها الامر الذي سيؤدي الى بناء خوارزمية لتعزيز الفرق بين الهدف والخلفية.وبحساب النسبة بين الاشعاع المستلم من الهدف ومن الخلفية، فان افضل تمييز للهدف يكون في حزمتين من الطول الموجي مما هو عليه الحال في حالة استخدام الحزمة الواحدة وخاصة عندما تكون درجة الحرارة للخلفية الارضية والهدف متماثلة..باستخدام احدى طرق التصنيف وهي طريقة الحد الاقصى لتميــــيز الهدف عن الخلفية الارضية في درجات حرارة مختلفة وحزم اطوال موجية مختلفة ومن خلال ملاحظة اقصى كثافة احتمالية . نستنتج ان طريقة الحد الاقصى هي افضل طريقة لتحسين التمييز في نطاق واسع من حزم الطول الموجي في درجات حرارة مختلفة بينما تكون طريقة حد العتبة اسلوب افضل في تحسين التمييز في درجات حرارة مختلفة ولكن في نطاق ضيق من حزم الطول الموجي | To discriminate between two IR targets or target from background two methods are used, the threshold method and the classification method Maximum likelihood Method. we calculate the spectral radiant emittance Wλ for target and background at different temperature (T) in two bands (3.5 - 4.1) μm (11.0 - 12.0) μm. The discrimination function (DF) is plotted as a function of the target emissivity (εA) for bandpass and as a function to target temperature TA in two bandpasses. From this work the discrimination of target from background under selected atmospheric conditions used in the modeling calculation demonstrates the feasibility of detection for target to background in minor temperature differences. Targets discrimination for thermal IR detection is accomplished by using threshold method, which has addressed the problem of detecting targets which are close to ambient temperature. This was done by modeling the background and by using the model as a base for developing an understanding of physical processes and their variations which will lead to the construction of an algorithm to enhance target to background contrast. The present study showed that by ratioing radiance received from target and background better target discrimination is possible using two bands than case from using one bandpass especially when target and background are of similar temperature. Using the Maximum Likelihood Method (MLH) to discriminate target from background in different temperature and different bands will demonstrate the maximum probability density function. Concluding that the Maximum Likelihood Method is to be the best method for discrimination in wide range of wavelength at different temperatures while the threshold method is to be the best method for discrimination at different temperatures but in range of narrow wavelength of bandpasses.

دراسة تحليلية للحام بالليزر على الخواص الحرارية - الميكانيكية للبوليمرات باستخدام برنامج ANSYS Analysis Study of Laser Welding on Thermal - Mechanical Properties of Polymers Using ANSYS Program

اسم المؤلف: زينه يونس علي
اسم المشرف: خالد هادي مهدي العبيدي ندى فاضل توفيق
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: الخلاصةان الهدف من هذه الدراسة, هو التنبؤ بسلوك المواد من حيث الخصائص التركيبية ,الحرارية والميكانيكية اثناء عملية اللحام في 3 - D. ان دراسة الخصائص التركيبية للمادة قد تم باعتبارها دالة لدرجة حرارة الانتقال الزجاجي T_g, ودرجة حرارة الانصهار T_m, وتغير الطور بينما يتم دراسة الخصائص الحرارية وفقا لتوزيع درجات الحرارة, والتدرج الحراري, والفيض الحراري, واخيرا يتم دراسة الخواص الميكانيكية بواسطة الاجهاد والمطاوعة.لقد تم تبني طريقة FEM لمحاكاة عملية اللحام لقطعتين متشابهتين ومختلفتين من مادة البولي بروبلين والبولي ستيرين في ثلاثة ابعاد. ان تحليل الخصائص الحرارية والميكانيكية لبوليمر البولي بروبلين والبولي ستيرين قد تم بدلالة كل من نموذج الحالة المستقرة والنموذج المتنقل باستخدام برنامج ((ANSYS 11. حيث ربط نموذج الحالة المستقرة (اعتبرت انها الحمل الابتدائي) مع نموذج الحالة المتنقلة بافتراض وجود الحمل الحراري والميكانيكي سوية بنفس الوقت على اعتبار ثبوت سرعة اللحام عند20ملي/ثانية ودرجة الحرارة عند 298م, وكذلك تم اختبار تاثير قدرة الليزر باستخدام ثلاثة قيم 50) (150,100 واط, كذلك درست تاثير نصف قطر بقعة الليزر على خصائص البوليمرات المستخدمة.بينت النتائج العددية قابلية لحام كل من المادتين البولي بروبلين والبولي ستيرين بهذه الطريقة, حيث لوحظ تناقص التشوهات الحرارية والميكانيكية الناجمة عن اللحام, كما يشير الشكل الهندسي هذه الاجهادات الى جودة اللحام. وبينت الدراسة ان كل من الفيض الحراري والانحدار الحراري يكون عند اعظم قيمها في اتجاه y - axis وهو اتجاه تسليط الليزر, وكانت درجة الحرارة العظمى في لحام كل من PP - PPو PP - PS هي ((351.4kو (425.9k) على التوالي. اما الاجهادات الميكانيكية فقد كانت واطئة في كل من PP - PPو PP - PS بحدود (0.181*〖10〗^9MPa ) و(0.166*〖10〗^9MPa) والمطاوعة (0.171) و(0.142) لكل من PP - PP وPP - PS على التوالي. واخيرا، لوحظ صغر مساحة المنطقة المتاثرة حراريا اذ كانت بحدود (9.2 〖mm〗^2) بالنسبة ل PP - PP، في حين اظهر عمق الاختراق تحسن مقارنة مع الاساليب المستخدمة، حيث كانت قيمته بحدود (2.5mm), اما في نموذج المتنقل فقد لوحظ تضاعف المساحة المتاثرة وعمق اختراق قريب من نتائج النموذج المستقر. | The aims of this study is to estimate the material behavior properties in terms of its structure, thermal and mechanical properties during welding process in 3 - D. The structure is studied as a function of T_m , T_g and phase change. While the thermal is investigated according to thermal distribution, thermal gradient and thermal flux. Finally the mechanical is examined by stress and strain.Finite element method is adopted to simulate welding process of two similar and dissimilar pieces of polypropylene and polystyrene in 3 - D.The analytical of thermal and mechanical properties is done in terms of steady - state model and transient model using ANSYS 11 program, then coupling the steady - state with transient model by supposed existing thermal and mechanical loads together in same time. Laser power effect on welding is investigated by three powers (50,100,and 150watt) and by laser spot radius (1mm, and 2mm), the welding speed is supposed constant at (20mm/sec).Numerical results show that the ability of this method to joined polymers material PP and PS, where it is noticed that the thermal and mechanical deformations are reduced, also the geometry shape of welding zone is indicated to a good quality of welding.From this study, the thermal gradient and thermal flux are at their maximum values at y - axis, in which the laser direction, and T_max in PP - PP and PP - PS joints are (351.4k) and (425.9k) respectively. Mechanical stresses and strains had low values, about (0.181*〖10〗^9MPa) and (0.166*〖10〗^9 MPa) and strain are about (0.171) and (0.142) for PP - PP and PP - 1PS joint respectively.Finally, it is observed that narrow HAZ area (9.2〖mm〗^2) of PP - PP joint, while penetration depth shows improvement comparing with usual methods, it's value is (2.5mm). In transient model it observes that multiples of HAZ area, and D_p is near its value in steady - state model.

تحضير ودراسة الخصائص الامتصاصية لاكاسيد الفيرايت باستخدام طريقة السيراميك Preparation and Study the Absorption Properties of Ferrite Oxides using Ceramic Method

اسم المؤلف: زياد طارق اسماعيل العبوسي
اسم المشرف: كاظم جواد كاظم الشجيري
الموضوع العام: علوم الفيزياء
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Compounds of ferrimagnetic materials were prepared in this work in order to investigate and evaluate the microwaves absorption at X - band with the range of frequencies (8 - 12.5 GHz) and Ku - band with the range of frequencies (12.5 - 18 GHz). And the second band is used for the first time in Iraq.Conventional Ceramic techniques (the solid state reaction method) were used to prepare three compounds of spinel ferrite : Cu - Zn ferrite, with formula (Cu1 - xZnxFe2O4), Mg - Zn ferrite, with formula (Mg1 - xZnxFe2O4), and Ni - Zn ferrite, with formula (Ni1 - xZnxFe2O4) at values of x = (0.0, 0.1, 0.3, 0.4, 0.5, 0.6), where x is the proportion of zinc in the ferrite, as bulk (54) samples of rectangle in dimensions (22.6*10*10 mm) within in X - band refine it to make its dimensions (15.5× 7.5×10) mm within in the Ku - band.The resonance peaks of three types of spinel ferrite appeared at the frequencies (9, 10, 11, 14, 15, 16, 17) GHz, and these peaks remain at the same frequencies with a different thickness for all types of ferrite, this indicates that the peaks are not related to thickness.For all samples it was found that the effect of increase the thickness and sintering temperature increased the values of attenuation and absorbance. And the best values of the absorbency were in the range of (Ku - band).The value of total transmission and the absorbance is 100% for sample of (Ni0.9Zn0.1Fe2O4) were the best values at (1050) °C then (14) GHz.The best results were obtained in this research, and the best values of absorbance and stability are (CuFe204, Cu0.9Zn0.1Fe2O4, Cu0.9Zn0.1Fe2O4,Cu0.4Zn0.6Fe2O4) that had been burned by (1000, 1050, 1100, 1050) respectively. These samples were range of (Ku - band).The best result was similarity in behaviour of absorbance for the sample (Mg0.6Zn0.4Fe2O4) at the range (X - band).X - ray diffraction results showed that the structure was polycrystalline for all samples and for all (X) values.The density of samples greatly depends on the temperature of sintering, witch increases proportionally with the temperature of the sintering
1 ... 7 8 9 10 11 ... 17