عرض: 25 50 75 100 النتائج

نتائج البحث: 50 من أصل 3,793

الاستقرارية الفيزيائية - الكيميائية للمتراكبات PVA - MnSO4.H2O مع الظروف الجوية == Physico - Chemical Stability of (PVA - MnSO4.H2O) Composites against weather conditions

اسم المؤلف: زينب كاظم حمزة
اسم المشرف: اسرار عبد المنعم سعيد
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الدراسه تم تحضير افلام بولي فينيل الكحول وكبريتات المنغنيز المائي باستخدام تقنية الصب مع نسب وزنية مختلفة وهي (2, 5, 10, 15) من كبريتات المنغنيز المائي وقد تم دراسة الخصائص البصريه لها.وقد تضمن هذا العمل ايضا دراسة تاثير الظروف الجوية على الخصائص البصرية لكل النماذج المعرضة.كل النماذج المعرضة وغير معرضة للظروف الجويه شخصت بطرق مختلفة مثل التحليل الطيفي لاشعة تحت الت الحمراء (FTIR)وصور المجهر الضوئي.اظهرت النتائج التجريبية ان طيف الامتصاصيه يزداد بزيادة تركيز كبريتات المنغنيز المائي. فجوة الطاقة تقل بزيادة تركيز الاضافة. وقد تم دراسة الثوابت البصرية الاخرى والتي تشمل (معامل الامتصاص, معامل الخمود, معامل الانكسار, ثابت العزل الحقيقي والخيالي).بعدتعريض النماذج للبولي فينيل الكحول النقي وللمتراكبات (PVA - MnSO4.H2O) وبتراكيز مختلفه وجد ان طيف الامتصاص يزداد بزيادة فترة التعريض. فجوة الطاقه تقل بزيادة فترة التعريض. وقد تم دراسة الثوابت البصريه الاخرى والتي تشمل (معامل الامتصاص, معامل الخمود, معامل الانكسار, ثابت العزل الحقيقي والخيالي).وقد بين طيف (FTIR) عدم وجود تفاعل كيميائي بين المادة المضافة والبوليمر وليس هنالك تكسر بالاواصر الاساسيه لهما بعد التعريض للظروف الجوية, واظهرت صور المجهر الضوئي ان كل النماذج تصبح اكثر خشونة بعد التعريض. | In this study, (PVA - MnSO4.H2O) films are prepared by using casting technique with different concentration of Manganese (II) sulfates monohydrate (2, 5, 10 and 15) wt.% . Also the optical properties is studied, and this work is involved with study the effect of weathering condition of optical properties for all samples which exposure. All the samples that exposure and unexposure to weather conditions have diagnosed by different methods such as fouirer transform infrared spectroscopy (FTIR) and optical microscope images. The experimental results show that the absorption spectrum increased with increasing the concentration of (MnSO4.H2O). The optical energy gap decreasing with increasing of the concentration of the additive. The optical constants (absorption coefficient, extinction coefficient, refractive index, real and imaginary dielectric constants) are studied. After exposure the samples in the form of pure PVA and (PVA - MnSO4.H2O) composites with different concentration found that the absorption spectrum increases with increases exposure time. The optical energy gap decreasing with increasing exposure time. The optical constants (absorption coefficient, extinction coefficient, refractive index, real and imaginary dielectric constants) are studied. The FTIR shows no chemical interaction between the Polymer and the additives and there are no broken fundamental bands after exposure to the weather conditions. Morphological photographs illustrate that the surface of all films become more roughness after exposure.

تحضير درع متعدد الطبقات وحساب عامل التراكم باستخدام انواع مختلفة مم البوليمرات == Multilayered Shielding Preparation and Buildup Factor Calculation Using Different Type of Polymers

اسم المؤلف: زهير سالم خميس
اسم المشرف: محمد قاسم الفخار | حارث ابراهيم جعفر
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: واسط
الصفحات الاولى:
المستخلص: Due to the possibility of producing secondary radiation when a radiation is being attenuated by a certain type of radiation shield, the use of multilayer shielding appears very useful. This study aims to investigate the use of multilayer materials as nuclear radiation shielding.The work presented in this thesis focuses on the possibility of using polymer materials as a nuclear shield. This polymer (high density polyethylene and epoxy) is chosen due to different reasons among which are its local availability, the ease of mixing additives with it, light weight, and flexibility. The polymer as a single shield was investigated, where five different forms of the polymer were used as a single shield. These kind of shield are polymer (High Density Polyethylene HDPE, and Epoxy) alone, HDPE with a 38%by weight of Pb (as an additive), Epoxy with a 33%by weight of Pb, and Epoxy with a 33% by weight of Al (as an additive). The attenuation coefficient (μ), and buildup factor (B) were measured for all five forms and composition. In particular, the attenuation coefficients were found to increase with the increasing of the Pb or Al additive and decrease with gamma rays energy increase, while the buildup factor where decrease with the increase of the Pb or Al additive and increase with the increasing of energy.On the other hands, the multilayer shielding materials were chosen to be either Al or Pb slides (with different thickness) with a slide of 2.8cm of polymer (HDPE or Epoxy) in different repeated combinations. In order to evaluate the values of μ and B for this multilayer composition, the values of μ and B for each Pb and Al were evaluated. Then these two values were estimated for the different combinations of the multilayer shields. In particular, it was found that placing the low Z material (polymer) in front of the detector [NaI(Tl) detector] first and then high Z material before that

تقييم المقاطع العرضية لليورانيوم للتفاعلات المستحثة بالنيوترون == Cross Sections Evaluation of Uranium for Neutron Induced Reactions

اسم المؤلف: روناك اكرام علي
اسم المشرف: ايمان طارق العلوي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: لقد تم في هذا البحث حساب قيم المقاطع العرضية لنظائر اليورانيوم (A=230 - 238) للتفاعلات المستحثة بالنيوترونات التالية ,,,(n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), (n,γ), (n,p), (n,t), (n,d), (n,α), (n,2α),and (n,2p)المقاسة بفترات مختلفة من الطاقة حيث ان هذه القراءات تم اخذها من الوكالة الدولية للطاقة الذرية (IAEA ) ومن المكتبات المشهورة عالميا مثل EXFOR, CINDA, ENDF, JEFF, JENDL,ROSFOND,CENDL,WIND, TENDL, BROND, IRDF, EAF وقد تم قياسها في الفترة الاولى من منتصف القرن الماضي وحتى اخر سنوات الماضية .لقد تم تحليل المديات الكاملة للطاقة لكل تفاعل وقد تم اعادة حساب وتقييم المقاطع العرضية ضمن فترات صغيرة مختلفة حسب مديات الطاقة للنيوترون القاصف مع الاخطاء المرافقة لها. قد تم وضع صيغ رياضية لمتعددة الحدود في معظم التفاعلات والتي تربط بين تغيير المقطع العرضي مع الطاقة والتي يمكن استخدامها للتنبىء بقيم المقاطع العرضية غير المحسوبة. لقد تم حساب قيمة Q - للتفاعل وطاقة الربط وطاقة العتبة وفرق الكتلة وعامل الرص لكل تفاعل ولكل عنصر هدف. ان التقييمات اعتمدت بشكل رئيسي على حسابات نموذج الجهد البصري لقد اعتمدت الحسابات على معاملات الجهد البصري النووي حيث تم اختيار وجمع المعلومات من مكتبة (RIPL) التابعة للوكالة الدولية للطاقة الذرية. لقد قمنا بدراسة صيغتين مختلفتين لنموذج الجهد البصري حيث ان الصيغة الاولى تسمى نموذج الجهد البصري القياسي والمعاملات ماخوذة من مكتبة Beijing والصيغة الثانية لنموذج الجهد البصري قد تم حسابها بتحديد ثلاث مديات طاقية. لقد قمنا بدراسة نسبة التفاعل (n,f) لكل نظير من نظائر اليورانيوم نسبة الى يورانيوم - 235 والذي يعتبر نموذج قياسي. لقد قمنا بحساب هذه النسبة لجميع التفاعلات المتوفرة لدينا وليس فقط تفاعل الانشطار واحتسبناها نسبة الى يورانيوم - 235.حساب اخر تم اضافته الى هذه الدراسة وهو دراسة تاثير التلوث لوليدة اليورانيوم - 237 والتي هي نبتونيوم - 237 بعمر نصفي 6.8 يوم وكذلك حساب الفيض النيوتروني لكل منهما. | The cross sections of Uranium isotopes (A=230 - 238) for the (n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), (n,γ), (n,p), (n,t), (n,d), (n,α), (n,2α),and (n,2p) reactions are calculated with different energy intervals which are collected from International Atomic Energy Agency (IAEA). The available cross sections data for the reactions mentioned above are collected from the well known international libraries like EXFOR, CINDA, ENDF, JEFF, JENDL, ROSFOND, CENDL, WIND, TENDL, BROND, IRDF, EAF and measured during the period from the middle of the last century up to several years ago.The cross sections are reproduced in fine steps of incident neutron energy in different intervals with the corresponding errors. The recommended cross sections for all available experimental data have been calculated for all considered reactions mathematical representative equations for all these reactions are formulated. These equations represent the variation of the cross section with energy, which could be used to predict the values of uncalculated cross sections.Q - value, threshold energy, binding energy, mass excess, and packing fraction for each reaction and target element have been also calculated.The evaluations are based mainly on the calculations of the optical model potential. The calculations are based on the nuclear optical potential, where the relevant parameters are collected and selected from Reference Input Parameter Library (RIPL) which is being developed under the international project coordinated by the International Atomic Energy Agency (IAEA). We study two different formula for optical model potential the first formula is the standard optical potential model and its parameters are taken from Beijing library. The second formula is the optical potential with different energy ranges. We study the ratio of the (n,f) cross sections for each Uranium isotopes relative to (n,f) cross section for U - 235 which could be considered as a standard sample. We have done the ratio not for the (n,f) cross sections only but also for other reactions like ,(n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), and (n,γ) relative to U - 235 reactions cross sections.Another evaluation is added to cross sections is the effect of the contamination of the daughter of U - 237 which the daughter is Np - 237 6.8day and their relative flux

دراسة التركيب المتهيج للنوى زوجية - زوجية ذات العدد الذري Z= 50, 48, 46 في المستوى المتهيج الاول == Study of Excited Structure for Even - Even Nuclides of Z = 50, 48, 46 in The First Excited State

اسم المؤلف: رسل سعد هادي
اسم المشرف: فاطمة عبد الامير جاسم
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: درست الخواص الكهرومغناطيسية للنظائر زوجية - زوجية للنوى 48Cd , 50Sn و46Pd الغنية بالنيوترونات من خلال قوى الانتقال لرباعي القطب الكهربائي |M(E2)|2 W.u ↓ واحتمالية الانتقال المختزل B(E2)W.u ↓ لانتقال اشعة كاما من المستوى المتهيج الاول الى المستوى الارضي. حيث تم حساب قوى الانتقال لرباعي القطب الكهربائي |M(E2)|2 W.u ↓ بالاستعانة بمعدل العمر للمستوى المتهيج الاول والشدة النسبية لاشعة كاما المنبعثة من ذلك المستوى, بينما قيم احتمالية الانتقال المختزل B(E2)W.u ↓ استخرجت من خلال عمر النصف للمستوى المتهيج الاول المصحح لمعامل التحول الداخلي.وللحصول على قيمة دقيقة لانتقال رباعي القطب الكهربائي ↓ E2, تم حساب ورسم القيم المتبناة لكل من |M(E2)|2 W.u ↓ وB(E2)W.u ↓ كدالة لعدد النيوترونات.في هذا البحث, تم تحويل القيم المتبناة لانتقال ↓E2 الى قيم احتمالية الانتقال المختزل B(E2) ↑ e2b2 والتي افادتنا في دراسة تركيب النوى من حيث الاختلاف في الشكل لان عامل التشوه β تم استخراجه من B(E2) ↑ e2b2, كما ان دراسة تاثير عدد النيوترونات على سلوك كل من B(E2) ↑ e2b2 وβ في المتسلسلات الايزوتونية لنوى 48Cd , 50Sn و46Pd يعطي معلومات جيدة حول التشوه في النوى.تركزت دراستنا على ثلاث انواع مختلفة من النوى, الاول بعدد ذري سحري50 , والثاني بعدد ذري شبه سحري 48, والثالث بعدد ذري بين القشرات المغلقة 46.في نهاية العمل الحالي تم عمل مقارنة جيدة للحسابات الحالية لقيم احتمالية الانتقال المختزل B(E2) ↑ e2b2 وعامل التشوه β مع معظم القيم العملية والنظرية الحديثة. | Electromagnetic properties for even - even nuclides in neutron - rich nuclei such 50Sn, 48Cd and 46Pd have been studied through the electric quadruple transition strength |M(E2)|2 W.u ↓ and the reduced transition probability B(E2)W.u ↓for γ0 - transition from first excited state to the ground state. The electric quadruple transition strength |M(E2)|2 W.u ↓ is calculated by using life - time for excited state with the intensity of γ0 - transition, while B(E2)W.u ↓ is extracted from half - life time to state corrected for internal conversion coefficient. To obtain precise value for the transition of E2↓, the adopted value for |M(E2)|2 W.u ↓ and B(E2)W.u ↓ was calculated and plotted as a function for neutron number. In present work, the adopted values for the transition of E2↓ are converted to B(E2)exp ↑ e2b2 which helped us to study the structure for nucleus, such as the variation in shape, because the deformation parameter β is extracted from B(E2) ↑ e2b2 and the study for behavior of each of B(E2) ↑ e2b2 and β versus neutron number in isotonic chains to 50Sn, 48Cd and 46Pd gives good information about the deformation in nuclei. Our study focused on the three different types of nuclei, the first with atomic magic number 50, the second with semi - magic atomic number 48 and the third nucleus with atomic number between closed shells 46. At the end of the present work, the good comparisons for the present calculation to the values of the B(E2) ↑ e2b2 and β with most recent values of experimental and theoretical was done.

تصميم مراة ايونية تعمل كمصحح للزيوغ باستخدام طريقة القيم الحدودية == DESIGN OF ION MIRROR AS AN ABERRATION CORRECTOR USING BOUNDARY VALUES METHOD

اسم المؤلف: محمد سلام مزاحم العبيدي
الموضوع العام: علوم الفيزياء
السنة: 2007
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

تصحيح الزيغ بسبب عدم التراصف في العدسات الكهروسكونية == THE ABERRATION CORRECTION DUE TO MISALIGNMENT IN ELECTROSTATIC LENSES

اسم المؤلف: رؤى تحسين عبد الله الصميدعي
اسم المشرف: احمد كمال احمد
الموضوع العام: علوم الفيزياء
السنة: 2006
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: اجري بحث حاسوبي في مجال بصريات الجسيمات المشحونة. يهتم البحث بتصميم منظومات عدسات كهروسكونية بوجود وعدم وجود تاثير عدم التراصف تعمل تحت ظروف تكبير مختلفة.ان توزيع مجال الجهد لعدسه احادية الجهد وعدسة مغمورة كهروسكونية تم تمثيله بدوال تحليلية. تم حل معادلة الاشعة المحورية للمجالات المقترحة لايجاد مسار الجسيمات المشحونة المارة في كل عدسة. ومن توزيع الجهد المحوري ومشتقتيه الاولى والثانية .تم حساب الخواص البصرية كالبعد البؤري والزيغين الكروي واللوني. كذلك تم ايجاد شكل اقطاب كل عدسة كهروسكونية ببعدين وبثلاثة ابعاد. ويعتمد الزيوغ في العدسات الكهروسكونية اعتمادا كبيرا على تراصف الاقطاب، وقد وجد انه عامل مهم يؤثر على الشكل الهندسي لمنظومة العدسة الكهروسكونية. ان نتائج هذه الدراسة لا تبرهن نظريا" امكانية تصميم منظومات عدسة كهروسكونية بزيوغ واطئة فحسب بل تبين امكانية تصنيع مثل هذه العدسات عمليا". | A computational investigation has been carried out in the field of charged - particle optics. The work is concerned with the design of electrostatic lenses with and without misalignment effect operated under different magnification conditions. The potential field distributions of einzel and immersion electrostatic lenses have been represented by analytic functions. The paraxial ray equation has been solved for the proposed fields to determine the trajectory of the charged particles traversing each lens. From the axial potential distribution and its first and second derivatives, the optical properties such as the focal length and spherical and chromatic aberrations have been compute. The electrode shape of each electrostatic lens has been determined in the two - and three - dimensions. The aberration of the electrostatic lens is highly dependent on the alignment of the electrodes and it has been found to be an important parameter affecting the geometry of the electrostatic lens system. The results of this investigation not only prove in theory the possibility of designing electrostatic lens systems with low aberration but also show the possibility of constructing such lenses in practice

تاثير نسب ومعاملات الحزم على دقة تصنيف صور الاقمار الصناعية المتعددة الاطياف == Effect of Band Ratios and Indices on Classification Accuracy of Multispectral Satellite Images

اسم المؤلف: سيف كامل شنين
اسم المشرف: اياد عبد العزيز العاني | صلاح عبد الحميد صالح
الموضوع العام: علوم الفيزياء
السنة: 2008
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Multispectral satellite images are holding whole information about the areaunder investigation. Many of digital processing techniques are used to extractmost of the possible information from these images, such these techniques arespectral band ratios, Tasseled Cap transformation and Principle ComponentAnalysis (PCA). These techniques are play good part for features extraction andreducing the number of spectral bands with no loses in information.The research aims to apply classifications on band ratios and image indiceswhich include PCA and Tasseled Cap transformations, of Enhanced ThematicMapper Plus (ETM+) satellite images, and to show how the accuracies of theclassification are differ from the accuracy of classification of the raw ETM+ bandsimages.The results show that the best bands ratios that adopted to represent fiveselected land features are 5/7, 4/5, 2/5, 1/4, and 2/4. Optimum Index Factormethod (OIF) has been adopted on raw bands combinations, and on the bandsratio combinations to select which band combination that contains muchinformation, where the results show that the best combination for raw bands is3 - 4 - 7, and best combination for ratios band is 4/5 - 1/4 - 2/5.Iterative Self Organizing Data Analysis (ISODATA) method has beenadopted as unsupervised classification, and Maximum Likelihood method assupervised classification. The overall accuracies are 87.18%, 89.45%, 89.26%,and 89.52% for raw bands, band ratios, Tasseled Cap, and PCA respectively,which showed that transformation techniques give good spectral enhancementsand feature extraction which are undistinguishable in raw image, and representgood tools to increase the accuracy of classification.

دراسة طيفية لبعض الجزيئات ثلاثية الذرات باستخدام الطرق شبه التجريبية == Spectroscopic study of some tri atomic molecules using semi - empirical methodes

اسم المؤلف: ذكرى كمال طه
اسم المشرف: زياد عدنان صالح
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تــم في هــذا البحث دراسـة الخـواص الطيفيه كجهد التاين , الالفه الالكترونيه وقيم الطاقه للمدارات الجزيئيه المشغوله بالالكترونات (EHOMO)، والفارغة من الالكترونات (ELUMO) وفجوة الطاقة وكذلك حساب الكهروسالبيه والصلاده الكيميائيه والنعومه (قابلية التفاعل). لبعض الجزيئات ثــلاثيـة الـــذرات نظـــريا , اذ ان الجزء النظري تمت دراسته من خلال استخدام برنامج كاوسين (Gaussian09 لبعض الجزيئات الثلاثية الذرات كجزيئة ثاني اوكسيد الكربون , الماء , الاوزون , هيدروكسيد الصوديوم , كبريتيد الهيدروجين وكلوريد المغنسيوم وذلك باستخدام برامج الكم شبه التجريبية التي تستغرق مدة زمنية للحسابات (PM3,PM6) قياسا الى الطرائق المتقدمه التي استخدمت في البحث هي طريقتا دوال الكثافة وهارتري فوك ( HF, DFT ) وباستخدام عناصر مجاميع اساس مختلفه . تم رسم الشكل الهندسي الفراغي الاكثر استقرارا اعتمادا على المحاور الداخلية (˚r,θ˚,Φ)f ومنها تم حساب اطوال الاواصر والزوايا المحصورة بينها وعزمي القصور الذاتي وثنائي القطب , ثوابت الدوران , الكتله المختزله , طاقة نقطة الصفر والاستقطابيه وطاقات المستويات الاهتزازية المنشطرة نتيجه لتاثير رينر - تيلر , ومضاعف - - ℓ وحساب الانتقالات بين المستويات الاهتزازيه كذلك حساب الطاقه الكليه للجزيئات كافه. كذلك تم حساب ترددات انماط الاهتزاز الاساسية للجزيئه ورسمها ضمن منطقة الاشعة تحت الحمراء من الطيف الكهرومغناطيسي . اذ توصلت الحسابات النظرية ان قيم مضاعف - ℓ - تزداد كلما انتقلت الجزيئات الى مستويات طاقة اعلى واما بالنسبة لحسابات تاثير رينر - تيلر وجد انها تسبب في انشطار مستويات الطاقة الاهتزازية بالنسبة لكل الجزيئات في المستويين الاهتزازيين (1,0,1) و(2,2,0) لهما مقدار الطاقة نفسه . اضافة الى جانب وجود مستويات طاقة اخرى منشطرة متقاربة في قيم طاقاتها . | The study of spectral properties such as ionizations potential, electron affinity, electronegative, chemical hardness, softness and electrophonic index from inharmonic potential energy curve, spectroscopic dissociation also calculated EHOMO, ELUMO and energy gap Eg by theoretical parts .this studies by using Gaussian 09 (Gaussian 09 Revisioon - A - 02 - SMP) program of some tri - atomic molecules such as (CO2, H2O ,O3 NaOH ,H2S , MgCl2 molecules ) using semi empirical quantum programs , By using semi - empirical (PM3,PM6) , density functional theory and Hartree - Fock (DFT ,HF) methods this by using different basis sets So after drawing structure optimization of molecules depending on the internal coordinate f(r,θo,φo), then calculate length of bonds and angles between it , moment of inertia, dipole moment for Molecules by quantum mechanics methods which, then we calculated the orbital energy values (EHOMO ) and (ELUMO) ; and from these values ; ionization energy was calculated for molecule by take absolute values to (EHOMO )A computational calculation is a valuable tool for estimating the (geometry, total energy, electronic properties, dipole moment, polarizability, electrostatic surface potential, vibration frequencies) of molecular structures. The IR spectrum of molecule primitive vibration frequency located within infrared region from spectrum ranged is obtained Then - ℓ - type doubling we conclude that values increasing with it exited to high levels , from Renner - Teller effect cause splitting of energy of or vibrational state (1,0,1) , (2,2,0) have the same energy

دراسة تاثيرات خسارة الانحناءات لليف البصري في منظومة الاتصالات البصرية == Study Effects of Optical Fiber Bending Loss in Optical Communication System

اسم المؤلف: دعاء هشام محمد
اسم المشرف: سمر يونس الدباغ
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا البحث , تم دراسة تاثير الانحناء على انتقال الاشارة الضوئية خلال الالياف البصرية. هذا العمل يتضمن قياسات الخسارة في القدرة خلال الليف البصري بوجود الانحناءات عند عدد لفات مختلفة من (1 - 10) لفة وعند اقطار انحناء مختلفة (12.5 , 10.5 , 8 , 6 , 4 , 3 , 2 , 1) cm. نوعين من الالياف البصرية تم استخدامها , الليف المتعدد الانماط (MMF ) باطوال مختلفة (1 , 20 , 40 , 100 , 120 , 140 ) m وليف احادي النمط بطول (4.5 m) .واستخدم نوعين من الليزرات ليزر دايود الاحمر (λ=650 nm) وليزر دايود اخضر (λ=532 nm).القدرة الضوئية تم قياسها باستخدام جهاز قياس القدرة. تشير النتائج ان كلما قل قطر الانحناء وزادت عدد اللفات فان الخسارة في القدرة الضوئية تزداد. حيث ان القدرة الضوئية لليزر الاخضر عند الطول الموجي (λ=532 nm) تقل من (48.083*10 - 4) mW الى (41.114*10 - 4) mW عند اللفة الاولى لليف متعدد الانماط بطول (40m) عندما تم حني الليف من cm12.5 الىcm 1. اما لليف الاحادي النمط, فان القدرة الخارجة لليزر الاخضر عند طول موجي (λ=532 nm) تقل من (13.608) mW الى (13.32) mW عند اللفة الاولى من طول (4.5) m لليف احادي النمط عندما تم حني الليف من 12.5 cm الى 3 cm . اظهرت النتائج ايضا ان تاثير الانحناء في القدرة الخارجة في حالة الليف المتعدد الانماط اكبر مقارنة بالليف احادي النمط. وكذلك النتائج لهذا البحث تتضمن تصميم وتنفيذ منظومة اتصال الالياف البصرية لفحص تاثير الانحناء على الاشارات المنتقلة خلال الالياف البصرية متعددة الانماط حيث لف من (1 - 10) لفة وعند اقطار انحناء مختلفة ( 1,2,3,4 ) cm . تم تضمين الاشارات باستخدام ليزر nm 532 .الاشارة تم ارسالها خلال ليف متعدد الانماط باطوال مختلفة وهذه الاشارة تم الكشف عنها باستخدام كاشف السليكون الضوئي (AEPX 65) . وجد ان الانحناءات تؤدي الى تغييرات واضحة في سعة ( جهد ) الاشارة الخارجه ؛ حيث يقل الجهد من 0.64volt الى 0.52 volt عند زيادة عدد اللفات من) 1 - (10 لفة في ليف بطول 40m وقطر الانحناء (1) cm.ويقل الجهد الى حد 0.2 volt في ليف بطول 140m وقطر الانحناء (1) cm.واخيرا الاشارات المنتقلة فيمنظومة الياف بصرية باستخدام كاميرا (CCD) واستخدام حاسبة شخصية معUSB TV STICK لرؤية تاثير الانحناء على انتقال الاشارات خلال الالياف البصرية. حيث ان الاشارة الخارجة ستقل من 0.68 volt الى 0.6 volt عندما عدد اللفات تزداد من (1 - 5) لفة في ليف بطول (1) m .اجرى احتساب كل من نسبة الاشارة الى الضوضاء ومعدل الخطا في نقل البيانات في للاشارات المنتقلة في منظومة الاتصالات عند اقصى طول لليف البصري 140m وعند اللفة 10 فكانت 115.147dB و3.68x10 - 27 على التوالي . بينما نسبة الاشارة الى الضوضاءSNR ومعدل الخطاBER في نقل البيانات في الاشارات المنتقلة باستخدام كاميرا CCD عند طول الليف البصري 1m وعند اللفة 10 فكانت 100.49dB و5.98x1o - 24 على التوالي .. اظهرت النتائج ايضا ان نسبة الاشارة الى الضوضاء تقل ومعدل الخطا في نقل البيانات يزداد بزيادة عدد اللفات في كلا المنظومتين | In this work, bending loss effects of optical fiber on the transmitted signal were studied.This work includes measurements of the power loss through optical fiber with the presence of bends at different wrapping turns (1 - 10) turns and at various bending diameters (12.5, 10.5, 8, 6, 4, 3, 2, and 1) cm. Two types of optical fibers were used, multimode optical fiber (MMF) of different lengths (1, 20, 40, 100, 120, 140) m and a single mode optical fiber (SMF) of length (4.5 m). Two optical sources were used, Red laser diode (λ=650 nm) and green laser diode (λ=532 nm). The output power was measured using an optical power meter. Results indicated that as the bending diameter decreased and the number of wrapping turns increased, the power loss increased. The output power of green laser diode at (λ=532 nm) decreased from (48.083*10 - 4) mW to (41.114*10 - 4) mW at the first turn of 40m MM fiber length when bent from (12.5 to 1) cm. For SMF, the output power of green laser diode at (λ=532 nm) decreased from (13.608) mW to (13.32) mW at first turn of (4.5) m SM fiber length when bent from (12.5 to 3) cm. The higher alteration output power in the case of multimode fiber has been deduced as compared with that of the single mode fiber. Also the results of the project involves a design and an implementation optical fiber communication system to investigate the effect of bending on the transmitted signals through multimode optical fiber wrapped (1 - 10) turns and at different diameters (1, 2, 3, 4) cm . Signals were modulated using 532nm laser diode then sent through multimode fiber of different lengths and detected by silicon photo detector (AEPX 65). The bending induces changes in the amplitude (voltage) of the output signal, the output voltage decreased from 0.64 volt to 0.52 volt when the no. of turns increased from 1 - 10 turns for 40 m optical fiber at a bending diameter of (1cm) and decreased to 0.2 volt for 140m multimode fiber at a bending diameter of (1cm).Finally, a transmitted signal in optical communication system has been built using CCD camera and Pc with USB TV STICK for monitory the effect of bending on signals that transmitted through optical fibers. The output transmitted signals decreased from 0.68 volt to 0.6 volt when the no. of turns increased from 1 - 5 turns for 1 m optical fiber. The calculations of signal to noise ratio (SNR) and Bit Error Rate (BER) for transmitted signals in optical communication system at maximum fiber length of 140m and 10turns are equal to 115.147dB and 3.68x10 - 27 respectively. While for transmitted signal form CCD camera at fiber length 1m and of 10 turns are equal to 100.49dB and 5.98x1o - 24 respectively.Results show that SNR decreased and BER increased as no. of wrapping turns increased for both systems.

محاكات الهوائي الكسوري باستخدام منحني كوج ومينكوسكي == Simulation of Fractal Antenna Using Koch and Minkowiski Curves

اسم المؤلف: خضير عباس قنبر
اسم المشرف: كاظم جواد كاظم الشجيري
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: الهوائي عنصر رئيسي في الاتصالات اللاسلكية فهو الادات التي تستقبل وترسل الموجات الكهرومغناطيسية في الفضاء الحر. ان التوسع الهائل في الاتصالات اللاسلكية بحاجة الى هوائيات متعددة الحزم وصغيرة الحجم وبمقطع جانبي منخفض ومن اجل تطوير اداء الهوائيات استخدمت الهندسة الكسورية لتحسين خواصها . والتي تجعل الهوائي متعدد الوظائف . في هذة الرسالة استخدمت تقنية جديدة لتحسين اداء الهوائيات الكسورية ثنائية القطب باستخدام عاكس كسوري متحرك. استخدمت الحقيبة البرمجية 4NEC2 لمحاكاة اول ثلاث تكرارت لهوائيات منحني Koch ومنحني Minkowski قبل وبعد اضافة العاكس الكسوري . ومن اجل تصميم الهوئيات بدقة عالية استخدم البرنامج Adobe illustrator CS4 لرسم جميع الهوائيات المقترحة . ومن نتائج المحاكاة لوحظ ولجميع الهوائيات ان العاكس الكسوري المتحرك حسن من قيمة VSWR (نسبة فولتية الموجة الواقفة) والكسب والتوجية وكذلك زاد الترددات الرنينية المفيدة للتكرارات الثلاثة لمنحني Koch . حيث اضاف تردد رنيني مفيد للتكرار الاول وترددين رنينيين مفيدين للتكرار الثاني وتردد رنيني للتكرار الثالث كذلك اضاف ترددين رنينيين مفيدين للتكرار الثالث لمنحني Minkowski . | Antenna is the main element in wireless communication. It is the instrument which receives and transmits the electromagnetic wave in a free space. The great expand in wireless communications need antennas with multiband, small size and low profile. In order to develop the performance of antennas, fractal geometry is used to optimize the property of the antenna. It makes antenna multi - functional. In this thesis a novel technique is used to optimize the performance of fractal dipole antennas by using a movable fractal reflector. 4NEC2 software package is used to simulate the first three iterations for (Koch curve and Minkowiski curve) antennas before and after adding the fractal reflector. In order to design fractal antennas with high accuracy, Adobe illustrator CS4 software program is used to draw all proposed antennas. From simulation results and for all proposed antennas are observed the movable fractal reflector optimize the value of voltage standing wave ratio VSWR, gain and directivity. Also, it increases the benefit resonant operating frequencies for all three iterations of the Koch curve. It adds one benefit resonant frequency to the first iteration and two benefit resonant frequencies to the second iteration and one benefit resonant frequency to the third iteration. Also, it adds two benefit resonant frequencies to the third iteration of Minkowiski curve

غشاء ZnO - SnO2 وخصائصه التحسسية == ZnO - SnO2) Thin Film and Their Sensing properties

اسم المؤلف: خالد وليد صابر
اسم المشرف: علي جاسم محمد الجابري
الموضوع العام: علوم الفيزياء
السنة: 2013
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ZnO,SnO2,Zno - Sno2 composite( ل في هذا البحث تم دراسة الخصائص التركيبية والتحسسية على توالي والمحضرة على قواعد قواعد زجاجية بظروف ترسيب مختلفة من نسب المواد (100% : 0%,0% : 100%, 50% : 50%, 30% : 70% , 10% : 90% ) وبدرجة حرارة القاعدة ( 400 & 450 ) سيليزية وبزاوية رش ( 0& 45 ) درجة. بينت فحوصات تقنية حيود الاشعة السينية (XRD) لتشخيص طبيعة تبلور الاغشية المحضرة, ان جميع الاغشية المحضرة ذات تركيب متعدد التبلور من نوع سداسي hexagonal)).مع اتجاهيه (002 ) للعينات المحضرة ل) ( ZnO,ZnO : SnO2 compositeما عدا (SnO2 ) فهو ذو تركيب متعدد التبلور من النوع الرباعي ( tetragonal ) مع اتجاهية ( 110 ) ، كما اظهرت النتائج الحصول على التركيب نانوي بمعدل حجم حبيبي ( من 2.4 الى 46 نانو) وتجانس منتظم بواسطة اضافة اوكسيد القصدير الى اوكسيد الزنك ، وهذا اعطى تبلور عالي مع ظروف الترسيب المختلفة. بواسطة تحليل السطح بواسطة المجهر الالكتروني الماسح ( SEM ) ومجهر القوة الذرية ( AFM ) تم التعرف على تاثير ظروف الترسيب المختلفة على خصائص تشكل العينات ، اظهرت صور (SEM ) تراكيب مختلفة مثل الابر والالياف والقضبان السداسية النانوية و(rich particle ) كما اظهرت النتائج التجانس والتوزيع المنتظم والنمو العالي ، كذلك زيادة معدل الحجم الحبيبي وزيادة الخشونة وهذا يقود الى الحصول على مساحة سطحية عالية وتاثير كبير على التحسسية .كل القياسات التحسسية اظهرت تحسسية عالية عند درجة حرارة القاعدة ( 450 ) سيليزية بزاوية رش (45 ) درجة ونسبة (SnO2 50% : % 50 ZnO) وعند زيادة نسبة ( ZnO ) لتصبح (100 % ) فان التحسسية تقل. ان العامل المؤثر على التحسسية هو نسبة المواد الداخلة في تركيب الاغشية الرقيقة كافضل نسبة حجمية 50)٪ 50 : ٪( وعند زيادة نسبة لتصبح 100٪ اوكسيد الزنك فان التحسسية تقل . اوكسيد الزنك لديه تحسسية عالية، ولكن عندما يخلط مع SnO2، وهذا يؤدي الى زيادة تحسسية وهذا واضح من خلال النتائج المستحصلة. | In this work, structural and sensing properties have been studied for ZnO, SnO2 compound and ZnO - SnO2 composite thin films. They were prepared by spray pyrolysis technique deposition at substrate glass, were used different deposition conditions, volume ratios(100% : 0%, 0% : 100%,50% : 50%, 70% : 30%, 90% : 10%,), Substrate temperature ( 400)&(450) oC , incident angle spray of spray pyrolysis (0) & (45) .. The X - ray diffraction technique has showed that all prepared films are polycrystalline structure with hexagonal type that preferred orientation of plan (002) direction for all thin film prepared for ( ZnO compound, ZnO - SnO2 composite thin films) except SnO2 thin films are polycrystalline structure with tetragonal type with preferred orientation of plan (110) , the results obtained by X - ray diffraction showed that we get the installation of nano structure with average grain size between ( 2.4 to 46 nm) and uniform Homogeneity by added tin oxide to zinc oxide, the results show high crystalline with deferent conditions deposition. Surface analysis by SEM and AFM have been used to understand the effect of the different conditions deposition on morphology properties of the samples. The SEM micrographs show needle - like, fiber - like , hexagonal nano rods, rich particles ( high growth) and homogeneity , uniform distribution, high growth. The results showed an increase of the average grain size with increasing roughness and this leads to obtain a high surface area and large effect on sensitivity. Overall measurements sensing showed that the highest of sensitivity at substrate temperature (450 oC) ,incident angle spray pyrolysis (45) with ratio ( 50% : 50%) . The influencing factor on sensitivity is the ratio of materials involved in the structure of thin - film as the best volume ratio its (50% : 50%) and when you increase the ratio to become 100%ZnO the sensitivity decreases. ZnO has high sensitivity, but when mixed with SnO2, this leads to increase sensitivity and this is clear from the results that were obtained.

التدريع الفعال لغرف الاشعة السينية التشخيصية == Effective Shielding For X - ray Diagnostic Rooms

اسم المؤلف: حيدر صادق جعفر
اسم المشرف: عبد الله احمد رشيد
الموضوع العام: علوم الفيزياء
السنة: 2013
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: وفقا لمصطلحات الاشعة السينية التشخيصية الطبية فان الاشعاع يتكون من الاشعاع الاساسي والاشعاع الثانوي .ان عملية وضع حواجز كالجدران التي تعترض الاشعاع الاساسي تدعى بالتدريع الاساسي في حين ان وضع حواجز للحماية من الاشعاع الثانوي تدعى بالتدريع الثانوي. في هذا العمل نتفحص حالة التدريع للحواجز الثانوية لغرفة التصوير الشعاعي للثدي والحواجز الاساسية لغرفة الاشعة السينية للصدر الرقمية في مستشفى الحسين التعليمي في مدينة كربلاء. باعتبار تصاميم غرف التصوير الشعاعي للثدي والاشعة السينية للصدر الرقمية ولمحة عن اجهزة التصوير الشعاعي المستخدمة فانه تم احتساب حمل العمل الكلي السريري لكل اسبوع وحمل العمل الكلي لكل مريض كما تم تحديد توزيعهما وفقا للفولتيات الاكثر استعمالا من خلال اختيار عشوائي للقيم التقنية السريرية الفعلية للــ mAs)) وقيم ذروة الكيلو فولت المناظرة لـ (2191) حالة تشخيص على مدى ثمانية اشهر لغرفة التصوير الشعاعي للثدي و(1402) حالة تشخيص على مدى اربعة اشهر لغرفة الاشعة السينية للصدر الرقمية. كمصدر لتدريع اشعاع الاشعة السينية التشخيصية فان تقرير المجلس الوطني للحماية من الاشعاعات والمقاييس رقم 147NCRP report No.147 )) وبرنامج الكمبيوتر (XRAYBARR) قد تم استخدامهما لحساب اسماك الحواجز الثانوية لغرفة التصوير الشعاعي للثدي والحواجز الاساسية لغرفة الاشعة السينية للصدر الرقمية . لغرفة التصوير الشعاعي للثدي فقد وجد ان حمل العمل الكلي في الاسبوع وحمل العمل الكلي لكل مريض كانتا تقريبا تساوي ما يحدده تقرير ان سي ار بي رقم 147 ( NCRP report No.147 ) لنفس عدد المرضى. الاسماك المطلوبة من الجبس والخشب كانا حوالي 4 ملم , 20 ملم على التوالي في حين ان الاسماك الفعلية الموجودة اعلى من هذه القيم. لغرفة الاشعة السينية للصدر الرقمية فقد وجد ان حمل العمل الكلي في الاسبوع كان بحدود 4.2 اضعاف ما يوصي به تقرير ان سي ار بي رقم 147 (NCRP report No.147 ) في حين ان حمل العمل الكلي لكل مريض كان بحدود خمسة اضعاف ذلك الذي يحدده تقرير ان سي ار بي رقم 147 ( NCRP report No.147 ) لنفس عدد المرضى لكل 36 ساعة عمل فعلية في الاسبوع لحالة ناشطة. السمك المطلوب من الرصاص كحاجز اساسي كان 2.7 ملم او 184 ملم من الخرسانة . في الواقع لم يكن هناك رصاص كحاجز اساسي بدلا عن ذلك فان مواد اخرى مثل الطابوق والخرسانة وجدت باسماك عالية كفاية لاستخدامها كحاجز تدريع اساسي.عظام الحيوانات استخدمت كاساس لاعداد اربعة نماذج من تركيبات مختلفة. هذه النماذج فحصت ضد اشعاع الاشعة السينية الاساسي عند جهود انبوب kvp 50 kvp 60 kvp 70 kvp 80 وkvp 90 باستخدام جهاز قياس معدل الجرعة minitracey. الانتقال النسبي , معاملات الملائمة باستخدام نموذج ارتشر Archer model , طبقة النصف ذات التوهين العالي ونسب التدريع لنماذج الانواع الاربعة حسبت وقورنت مع بعضها البعض. الكثافات وطبقات النصف ذات التوهين العالي عند kvp 50 وkvp 70 لنماذج الانواع الاربعة قورنت مع الكثافات وطبقات النصف ذات التوهين العالي لمواد التدريع الشائعة والمبتكرة. لقد وجد ان طبقات النصف ذات التوهين العالي لنماذج الانواع الاربعة افضل من طبقات النصف ذات التوهين العالي المواد الشائعة والمبتكرة. يستنتج من ذلك ان هذا النوع من المواد ستكون مفضلة كمادة تدريع ضد اشعاع الاشعة السينية الثانوية.

قياس تراكيز غاز الرادون ووليداته وتقييم التعرض في ابنية كلية العلوم في الجامعة المستنصرية == Measurement of Radon and Daughters Concentrations and Exposure Assessment in the Buildings of the Science College at AL - Mustansiriyah University

اسم المؤلف: حيدر عيد فاضل
اسم المشرف: ايمان طارق العلوي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The concentrations of Radon gas and their progeny have been measured in the building of Al - Mustansiriyah University College of Science. Deanship building, four flowers, includes dean office and administrative staff in addition to the department of mathematics, department of biology, lecture rooms and laboratories affiliated in addition to the basement of the Deanship building, building of department of chemistry libraries, building of department of physics libraries, and building of meteorology or atmospheric Science (in which the detectors have been suspended, but most of them had been lost because of the maintenance work, which cooperated with the preparation of this study).The nuclear track detector of solid state CR - 39 technique has been used to study the trace effect. 356 detectors have been suspended and distributed (two detectors) in each location under study. Detectors with 1cm x1cm area have been suspended with two heights; the first height represents the sit down mode and the second represents the standing mode, for a period of 90 days except those for the department of chemical libraries because of an official holiday in the Al - Mustansiriyah University.The dosimeters have been design to be adequate for the research environment. The samples are collecting after exposing time for the period mentioned above, then applying the chemical etching and Statistics numerical process the density of the nuclear has been calculated in order to calculate the concentrations of Radon and their daughters. The calibration process has been made in this work by exposing other detectors (similar of that used for the detecting) to Radium - 226 source with known activity radiation.It was found that all concentrations are within the world wide limits. It has been found the Radon concentrations in the basement of Deanship building are relatively higher than in other location have been observed. These concentrations are decreasing gradually with height to reach the lowest value at the fourth floor. It strengthens that the Radon gas is heavier than air. The yearly effective dose of the exposure to Radon has been calculated. The Radon concentration is within the world wide permissible limits.

تاثير استبدال Sr على بعض الخواص الفيزيائية للمركب Ba2 - xSrxCa2Cu3O7+? == Effect of Sr Substitution on some of Physical Properties of (Ba2 - xSrxCa2Cu3O7+?) Compound.

اسم المؤلف: حسين عبد الوهاب توفيق
اسم المشرف: سوسن عبد الحسين مهدي
الموضوع العام: علوم الفيزياء
السنة: 2017
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: لقد تم في هذه الدراسة تحضير المركب الفائق التوصيل Ba2 - x SrxCa2Cu3O7+δ ذا درجة حرارة حرجة عالية ولقيم x=0.0, 0.1, 0.2, 0.3, 0.5, 0.6 وباستخدام طريقة تفاعل الحالة الصلبة لغرض دراسة التغيرات الحاصلة في التركيب البلوري ودرجة حرارة التحول والخواص الفيزيائية والخواص العزلية.حيث تم فحص التركيب البلوري باستخدام تقنية حيود الاشعة السينية (XRD) واوضحت نتائج تحليل حيود الاشعة السينية ان جميع العينات للمركبات المحضرة لها تركيب معيني متعامد المحاورويمتلك اطوارتركيبية رئيسية عالية ومنخفضة مع تغير ثوابت الشبيكة ونسبة c/a والكثافة الكتلية والنسب الطورية نتيجة لزيادة تركيز Sr . اما قياسات السطح فتمت باستخدام المجهر الالكتروني حيث اظهرت صور المجهر الالكتروني الماسح ان العينات لها ترتيب طبقي متجانس ثم ان زيادة تركيز Sr ادى الى تغير الاحجام الحبيبية .واشارت النتائج الى ان هناك زيادة في محتوى الاوكسجين نتيجة زيادة نسبة Sr المضافة للمركب من خلال الزيادة في محور c والذي بدوره يؤثر على مقدار Tc للمركب .اما المقاومة الكهربائية فتمت دراستها باستخدام تقنية الاقطاب الاربعة وتم ايجاد درجة الحرارة الحرجة Tc للمركبات الفائقة التوصيل من خلال منحنيات اعتماد المقاومية الكهربائية على درجة الحرارة وقد تبين ان اعلى نسبة درجة حرارة حرجة للمركب الفائق التوصيل Ba2 - xSrxCa2Cu3O7+δ Tcoff=140k وباستخدام مقياس ال LCR فقد تم قياس ثابت العزل الكهربائي كدالة للتردد ضمن المدى من 50Hz الى 1MHz في درجة حرارة الغرفة. وقد وجد ان زيادة تركيز Sr يؤدي الى تغير في ثابت العزل الكهربائي .اما بالنسبة للخصائص الفيزيائية فاوضحت النتائج ان زيادة نسبة Sr ادت الى زيادة في المسامية يقابلها نقصان في التقلص الحجمي والكثافة.

ثابت العزل الكهربائي الفعال للسليكون العشوائي النقطي الكمي == Effective Dielectric Constant of Amorphous Silicon Quantum Dots

اسم المؤلف: حسين خضير مجبل
اسم المشرف: موفق كاظم عبد الرضا
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تركز هذا العمل على دراسة الحسابات النظرية لثابت العزل الكهربائي للسليكون العشوائي ذو النقاط الكمية ولحجوم تتراوح من (1,8 - 4,8) نانوميتر. الحسابات النظرية اظهرت بان قيم ثابت العزل الكهربائي للنقاط الكمية من السليكون العشوائي قد انخفضت. اعتماد ثابت العزل الكهربائي على التردد الساقط تحقق في هذه الدراسة. التصغير لشبه الموصل الصلب وصولا الى المقياس النانوي يجعل التاثير الكمي اكثر اهمية. وكنتيجة لذلك فان فجوة الطاقة لشبه الموصل النانوي تتوسع, وتصبح هنالك ازاحة لمستويات اللب, وتعديل لعرض الحزمة كذلك ازدياد الانفصال بين المستويات الثانوية داخل الحزمة. الاخماد لثابت العزل الكهربائي ينشا من تعزيز الربط البلوري وارتباط الالكترون مع الفونون بسبب نقائص عدد الاحداثيات الذرية وارتفاع نسبة السطح الى الحجم مع انخفاض حجم الجسيم النانوي. الاخماد في قيمة ثابت العزل الكهربائي يقودنا الى الازاحة نحو الطاقات العالية في حافة الامتصاص الفوتوني وكذلك الانبعاث الفوتوني والتي نجد تطبيقاتها في النبائط المايكروالكترونية والفوتونية ذات المقاييس النانوية. وبواسطة هذه الحسابات فقد اعتمدنا فكرة التقييد الكمي, حيث ان فجوة الطاقة لشبه الموصل تتطابق مع حجم النقاط الكمية من السليكون العشوائي. التركيب للجسيم النانوي قسم الى ثلاث قشرات (طبقات) والتي هي طبقة السطح وطبقة السطح الثانوي وطبقة اللب, حيث ان طول الاصرة وطاقة الاصرة وعدد الاحداثيات تختلف باختلاف القشرات. الاصرة تنكمش وطاقتها تزداد في طبقة السطح اما في طبقة السطح الثانوي فان الاصرة تنكمش قليلا ولكن طاقتها لاتتغير بينما في طبقة اللب فان كلا من طول الاصرة وطاقتها هي نفسها كما لو كان الحجم غير نانوي, بالاضافة الى ذلك في هذا الانموذج نجد ان انكماش طول الاصرة وزيادة طاقتها يزداد مع زيادة النقص في عدد الاحداثيات الذرية. استخدم لحسابات هذه الدراسة الحقيبة البرامجية Mathcad Professional 2015. | In this work, theoretical calculations of amorphous silicon quantum dots of (1.8~4.8 nm ) have been studied. The presented calculations shows that the dielectric constant of amorphous silicon quantum dots are suppressed. The frequency dependence of the dielectric constant was investigated. When the solid is miniaturized, quantum effects become, significantly important. As a results, the bandgap of a nanosemiconductor is extensions, the core levels will be shifted, the revision to width for band, and increasing split of sublevel inside the band. Dielectric extinction arises from the promotion of the binding energy to crystal and e - p reaction owing to coordination number diminution and the high in proportion of surface into volume with reduction of the size to the particles. A reduction for dielectric tendency to the brinks for photo - absorption and photoemission are a blueshifted, that might found applications in micro - electronic and photonic devices build on nanometric gauge. With the suggested calculations, effect of quantum confinement was a doped, the bandgap for nanosemiconductor could be governed with the size of amorphous silicon quantum dots. The structure of the nanoparticles was classified into three shells, i.e., the surface, the subsurface and the core, where the bond length, bond energy and coordination number are different. Bonds contract and the energy increase in the surface shell. In the subsurface shell, the only bond contract with a little but the energy unchanged, whereas the bond length and the bond energy are remain the same as the bulk in the core of particle. In this model the bonds contract and the energy increase with the increasing of atomic coordination number imperfection. All the calculations made in this work have been done using Mathcad Professional 2015.

تاثير التقوية بالاطيان على بعض الخصائص للمتراكب بوليمري PS - PVA == Effect of clays reinforcing on some Properties of polymer composite

اسم المؤلف: حسين حيدر حسين
اسم المشرف: فؤاد شاكر هاشم الجبوري
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: دبلوم عالي
اللغة: العربية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: من خلال البحث تبين ان اضافة مسحوق معدن الكاوؤلينايت الى بوليمر ( PS - PVA)ادى الى تحسين الخصائص نتيجة لظهور تغييرا مستمرا في الخصائص البصرية.اظهرت قياسات FT - IR ان المواد المستخدمة في البحث ( البولي ستايرين والبولي فينيل الكحول) بدرجة عالية من النقاوة وهي مطابقة للمواصفات العالمية المعمول بها. التحليل المعدني لمسحوق طين الكاؤولين بواسطة تقنية XRD يدل على ان المكون الرئيسي في المادة المالئة هو معدن Aluminum silica Hydroxide Al2 Si2O5 (OH) 4 وعدم وجود اي نسب من الاكاسيد والاملاح غير المرغوب فيها.اعلى قيمة للامتصاصية في المنطقة فوق البنفسجية اي ضمن المدى (200 - 270) nm وتبلغ ذروتها عند الطول الموجي250 nm لاغشية متراكب PS مع مضاف مسحوق معدن الكاوؤلينايت المحفز بعدها يكون البوليمر نافذا للضوء ولجميع النماذج . لذا يعتبر البوليمر مادة ماصة جيدة للموجات فوق البنفسجية فيستعمل لاغراض الحماية او غطاء واقي من اشعة الشمس فيمكن استخدامه لخزن الادوية وطلاء الاطارات لمنع وصول الاشعة فوق البنفسجية لهذه المواد. كذلك يمكن صنع نظارات شمسية من المتراكب البوليمري لغرض حماية العين البشرية من الاشعة فوق البنفسجية بسبب نفاذيتها القليلة لها تقل فجوة الطاقة لاغشية متراكب PS مع مضاف مسحوق معدن الكاوؤلينايت المحفز وهذا يعود الى زيادة المستويات الموضعية بين حزمتي التكافؤ والتوصيل لذا يمكن ان تستخدم في صنع متحسسات وكواشف بوليمرية وكذلك في الخلايا الشمسية. | The studying it is showed that adding the powder of(kaolin metal to polymer PS which is caused to improve the particulates because of appearing continuous changing in optical properties. FTIR measurements cleared that the used materials through the search (polystyrene and polyvinalcahol with a high degree of pureness which is conformable with inform international specification. The metallic analysis of kaolin clay by (XRD) technique points that the main component in the surfeited is the metal of Aluminum Silica Hydroxide Al2 Si2O5 (OH)4 with out any rate of unwanted oxide or salts . High degree of absorption during ultrasonic radiation area other way during (200 - 270) nm range which reaches the climax at wavelength 250nm superposed filmy PS with adding kaolin metal powder catalyzer, the polymer becomes light traverse for all kinds. So the polymer considers as a good absorbent material for ultrasonic wave that uses for protection and as a faceplate from sunbeam , it also can be used for medicine storage ; tyres painting to protect from ultrasonic radiation and sunglasses production to protect the eye from ultrasonic radiation because of its low permeability . The energy gaps of superposed filmies becomes less PS with adding catalyzer kaolin metal powder and this happens between equivalent bunches and conductance , So this can be used to produce sensors and polymer detect as well as solar cell.

تحضير تراكيب نانوية للزنك اوكسيد بطريقه السول - جيل

اسم المؤلف: تغريد سعدون محسن
اسم المشرف: رعد سعدون صبري | محمد جاسم محمد حسن
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا البحث دراسة الخصائص التركيبية ,البصرية ,الكهربائية والتحسسية للاغشية (ZnO) النقية والمشوبة بالسيريوم (Ce) بالنسب % (3,5,10) المحضرة بطريقة السول - جيل, والتي رسبت بطريقه السبن كوتنك على قواعد زجاجية وملدنه عند درجات الحراره (350,500,550˚C) للاغشيه النقيه و(˚C550 ) للاغشيه المشوبه وبسمك (315.5)nm.بينت فحوصات نمط الحيود للاشعة السينية (XRD) لتشخيص طبيعة تبلور الاغشية المحضرة, حيث اظهرت النتائج ان جميع الاغشية المحضرة ذات تركيب متعدد التبلور من نوع سداسي hexagonal)), كما تبين من نتائج التشويب ان زيادة التشويب تؤدي الى النقصان في الحجم الحبيبي حيث تناقص الحجم الحبيبي من (37.1) الى (27.0) في حالة التشويب بنسبة ,10%, ومن خلال قياسات ماسح القوة الذرية AFM تبين ان خشونه السطح تزداد بزياده نسب التشويب من القيمه (1.14) الى القيمه 2.15)) عند النسبه 10 % ,ومن قياسات المجهرالالكتروني الماسح SEM تم التعرف على نوع التراكيب ففي الاغشيه النقيه ظهرت التراكيب ذات جسيمات نانويه كرويه الشكل موزعه بصوره منتظمة ومتجانسة ,بينما الاغشيه المشوبه كانت التراكيب الناتجه شبيه بالالياف وعلى شكل شبكه تجاعيد (متغصن ). وقد تم دراسة الخواص البصرية لاغشية اوكسيد الزنك النقية (ZnO) والمشوبة بالسيريوم (ZnO : Ce) على دراسة طيف النفاذيه (T᷊) لاغشية المحضرة حيث بينت النتائج ان اعلى نفاذيه تم الحصول عليها هي(95%) عند الاغشية النقيه بينما كانت النفاذيه للاغشية المشوبة %(65 - 40) ولمدى اطوال موجيه350 - 900) nm.) , وتبين ايضا ان الامتصاصية بشكل عام تزداد بزيادة نسب التشويب لتصل اعلى قيمة عند النسبه10% بزيادة نسبة التشويب. تم حساب فجوات الطاقة البصرية للاغشية النقيه والمشوبه وتبين ان فجوة الطاقة تزداد قليل بزيادة نسبة التشويب الى ان تصل الى اعلى قيمة عند نسبة التشويب (10%). وكانت فجوة الطاقة ( (Eg تتراوح من (3.219 eV) الى (3.232eV) بزيادة نسب التشويب. اظهرت القياسات الكهربائية ان التوصيلية الكهربائية المستمرة تزداد بزيادة نسبة التشويب ثم تقل عند النسبه 10 % مع زيادة نسبة التشويب . وبينت القياسات ان الاغشية كافة تمتلك طاقتين للتنشيط (Ea1) و(Ea2) تقل قيمتهما بزيادة نسبة التشويب. كما بينت خصائص(photoconductivity) ان الاغشيه تمتلك ربحيه مقدارها (2.357) للاغشيه النقيه و(1,1.666,1)للاغشيه المشوبه عند النسب (3,5,10 )%على التوالي . اما خصائص التحسسية لجميع الاغشية المحضره كانت تقاس بعد تعريضها الى ( (100,150,200 ppm) من ال( NH₃و( NO₂ عند درجه حراره الغرفه . النتائج العملية بينت ان اغشية اوكسيد الزنك المشوبة بالسيريوم والمرسبة على قواعد زجاجية تحسن التحسسية لتلك الاغشية للغاز ( NH₃و ( NO₂ كما تبين ان افضل نتيجة سجلت كانت للاغشية المشوبة بنسبة 10 % حيث كانت (17%) للغاز NO₂ و(16.66%)للغاز NH₃عند 300 درجه مئويه في حين كانت افضل نتيجه للاغشيه المشوبه بنسبه (%3 و%5) حيث كانت (12.6 %) للغازNO₂ و(10.31%) للغاز ,NH₃ 14%)) للغاز NO₂ و(13.28 %) للغاز NH₃ على التوالي عند 200 درجه مئويه . بالاضافة الى ذلك تبين ان التحسسية لها علاقة نسبية لدرجات الحرارة وكمية الغاز. | In the present work, structural, optical, electrical and sensing properties have been studied for undoped and Ce doped zinc oxide (ZnO) thin films with different cerium doping concentrations (3 ,5 and 10) % prepared by a Sol - gel method with spin coating , deposited on glass substrate at annealing temperature (350,500 and 550 )˚C for the pure thin film , 550 ˚C for doped thin film with (350±10) nm thickness, The X - ray diffraction technique has showed that all prepared films are polycrystalline structure type of hexagonal wurtzite, The doping resulted in decreasing grain size deteriorates the crystalline of the films from (37.1nm) of pure ZnO to (27nm) of ZnO : Ce at (10 %) doped. Surface analysis by AFM have been, the roughness increased with increasing the cerium concentration in the films from (1.14) to (2.15) at 10 % , From FE - SEM have been identified the structures in the thin film pure, spherical nanoparticles distributed a regular basis and homogeneous, while doped thin film were shapes like fiber and a wrinkle network. The measurements of optical properties transmittance of undoped and Ce doped ZnO films showed higher transmittance was (95%) for undoped ZnO films while (65 - 40% ) for doped Ce films within wavelength range (350 - 900nm). In addition, the results have showed the absorbance increased with increased doping to reach maximum value at 10% concentration. The energy gap of ZnO was calculated for undoped and doped films .It is noticed that the energy gap increases slowly with the increased of doping until it reaches the highest value at 10% doping concentration , and the energy gap ranging from (3.219) to (3.232) with increased doping concentration.The results of electrical properties have showed that direct current (D.C) conductivity increases then decreases by increasing doping to reach maximum value at 10% doping concentration. The results have showed that the films have two activation energy Ea₁ and Ea₂. From (photoconductivity) characteristics it has found that the gain factor (2.357) for pure ZnO and (1, 1.666, 1) for ZnO : Ce at (3, 5 and 10) % Respectively.The sensing properties for all undoped and Ce doped films were measured after films surface was exposed to (100,150 and 200) ppm for NH₃, NO₂ gas at room temperature. The experimental results of Ce doping of zinc oxide thin films with different cerium doping concentrations (3,5 and 10) % which deposited on glass substrate ,sensitivity of thin film sensor elements was investigated in this work. Therefore that the sensitivity of all the samples increases with the increasing in the operating temperature, reaching a maximum value corresponding to an optimum operating temperature which is 300°C for sample (10 %) and 200 °C for samples (3 % ,5 %). In addition ,the sensitivity is directly proportional with the operation temperature for limited range. In general , the sensitivity increases by increasing the concentration of NH₃, NO₂ with increasing temperature degree.

تحضير ودراسة الخصائص البصرية اللاخطية لمواد بلورية سائلة نيماتية مطعمة بجسيمات نانوية == Preparation and Study Non - linear Optical Properties of Nematic Liquid Crystal Materials Doped by Nanoparticles

اسم المؤلف: بان علي ناصر غالب
اسم المشرف: عبد العزيز عبيد موسى العكيلي | ياسين حسين كاظم
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: The present research include preparation the nematic liquid crystal materials doped with nano materials and studies the structural ,linear and nonlinear optical properties, for using it in field of nonlinear optics. Many properties of liquid crystal can be improved and enhanced by doping with nanoparticles materials, which are favorable for practical applications.Nematic liquid crystals (NLCs) (pure and doped) good materials for field of nonlinear optics (NLO) and its applications because of their large non - response nonlinearity and their extended spectral transparency.In this work, preparation of two compounds (ligands) of liquid crystal Schiff's bases derived from benzidine and hydrazine (Di - Cinnamylidene Benzidine) (B1) , (Bis - 4 - Methoxy - Benzyldene - Hydrazine) (B2) , and their complexes with bivalent ions (Cu, Ni, and Zn), take samples (M1B1,M2B1,M3B1, M1B2,M2B2 and M3B2) nanoparticles materials respectively, were carried out. As well as thin films of solutions of two materials (Di - Cinnamylidene Benzidine) and (Bis - 4 - Methoxy - Benzyldene - Hydrazine) and their complexes have been deposited on glass substrates, the samples prepared from solutions via spin - coating method at (10 - 3 M).The ligands and their complexes have been characterized by using FT - IR spectra and polarized optical microscopy (POM) to study liquid crystalline behavior, which has shown that the compounds have liquid crystalline properties belong to enantiotropic nematic phase (bi case media).The crystal structure has been studied for all prepared samples by using X - Ray diffractometer (XRD) ,and it has shown that ligands have polycrystalline structure. The complexes (M1B1,M2B1,M3B1 and M2B1) have monoclinic structure .The complex (M1B2 ) have orthorhombic structure, and the complex (M3B2) have amorphous structure.Atomic force microscopy (AFM) measurements for all samples show that the grain size ranging from (70 - 89) nm.The linear optical properties for all prepared samples have been studied, a study of UV - VIS spectra for different concentrations for each material dissolved in absolute ethanol solvent (9×10 - 5,8×10 - 5,7×10 - 5, 6×10 - 5, 5×10 - 5 and 4×10 - 5) M ,then study of absorption and transmission spectra for all prepared thin films at 10 - 3 M. The results showed when the concentrations increased the absorbance also increased for the same wavelength. The opposite relationship was observed for transmittance.The nonlinear tests calculated used (Z - Scan) technique in two cases (Close aperture) and (Open aperture) for obtain nonlinear refractive index coefficient (n2) and nonlinear absorption coefficient (β).The measurements performed using diode pump solid state laser operating at (473 nm) wavelength. The results showed an increase both of the nonlinear refractive index coefficient and nonlinear absorption coefficient, when increasing concentrations for all samples of liquid crystal material(solutions and thin films).The nonlinear refractive index increased linearly with the nonlinear phase shift .The thin films possess large linear and nonlinear optical properties as compared with liquid crystal as solution.The result imply that thin films of pure nematic liquid crystal and its complexes can be used as a potential medium for various optoelectronic applications including that in optical power limiting. The result show that the optical power limiting threshold is inversely proportional to the concentration of solution for all prepared samples.

تصنيع حراريات من البوكسايت العراقي == Refractories Manufacturing from Iraqi Bauxite

اسم المؤلف: ایناس محي هادي
اسم المشرف: محاسن فاضل هادي الكاظمي
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Iraqi raw Bauxite was fired at (1400) ̊C in order to produce calcined Bauxite. Chemical analysis and X - Ray Diffraction were carried out on the Iraqi Bauxite and calcined Bauxite to assess their ability for refractories production.The refractory mixture prepared from calcined Bauxite and raw Kaolin as a binder. The Kaolin was added in ratios of (10%, 20% and 30%). From the results of physical properties it was found that the mixture which has (10%) kaolin is the most suitable one for refractory production. Micro and Nano Zirconia and raw Zircon were added in ratios of (5%,10%,15% and 20%) in order to improve Iraqi Bauxite characteristics to be suitable for refractories production which are used in glass and metals industries.The samples were formed by semi - dry pressing with different load with the addition of potassium silicate in ratio of (10%) as a binder. The samples were formed with dimensions for (height × diameter) as : (50×25)mm2, (50×50)mm2, (1×50)mm2, (1×25)mm2 and (50×10)mm2. The samples were dried at room temperature for (24)hr, after that dried by electrical dryer at (110) ̊C for (8)hr. The refractories of (Bauxite - Zirconia) fired at (1400) ̊C and refractories of (Bauxite - Zircon) at (1500)̊C by a firing program with a soaking time for (2)hr.The test which were carried out are : (X - Ray Diffraction and SEM), Physical Testing : (Linear Shrinkage, Apparent Porosity, Water Absorption Ratio and Apparent Density), Mechanical Testing : (Bending Strength, Compressive Strength, Diametrical Strength, Hardness and Surface Roughness), Thermal Testing : (Thermal Conductivity, Specific Heat Capacity, Thermal Expansion Coefficient, Thermal Shock Resistance and Differential Thermal Analysis (DTA). And last test was Chemical Resistance to molten glass.According to (XRD) and (SEM) results the refractories consist mullite phase and glass phase. Refractories of (Bauxite - Nano Zirconia) have the lowest linear shrinkage and highest apparent density then the refractories (Bauxite - Micro Zirconia) and (Bauxite - Zircon).The adding of micro or Nano Zirconia or raw Zircon led to decrease the linear shrinkage and increase apparent density because of the increasing of pure ceramic materials in account of raw ceramic materials. The increasing of apparent density associated with decreasing of apparent porosity and water absorption ratio.The improving of the mechanical properties by adding Zirconia and raw Zircon causes by the high toughness of the additive ceramic materials which is also prove the crack pining mechanism with ceramic particles practically.The increasing of apparent density in susceptible the thermal properties therefore the thermal conductivity, specific heat capacity and thermal expansion coefficient were decreased while thermal shock resistance was increased, according to properties of the additive ceramic materials. The results of the differential thermal analysis shown that the refractories of (Bauxite - Zirconia) have a high thermal stability in the test temperaturerange (25 - 1500)̊C, except some process that return to raw Kaolin, endothermic process were moisture loses and crystalline water loses and exothermic process at (900 - 1000)̊C as mullite phase formed from the reaction between (SiO2) and (Al2O3).The increasing of chemical resistance causes from adding of Zirconia and raw Zircon to the prepared refractories, which led to reduction of wetting ability and the amount of molten glass which adhesive with refractories, on the other hand forbade the chemical reaction between the molten glass and the refractories.

دراسة نظرية للحاصل الفوتوني لتفاعل كوارك - كوارك == Theoretical Study of Photon Yield at Quark - Quark Interaction

اسم المؤلف: ايناس جاسم محسن ولي
اسم المشرف: هادي جبار مجيبل العكيلي
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تمت دراسة حاصل انتقال الفوتونات في تفاعل الكوارك - كوارك نسبة لتبادل الكلون وبدرجات حرارة عالية بالاعتماد على النظرية الكمية اللونية. انصبت هذه الدراسة على حساب معدل الانتقال الفوتوني والناتج بعملية الفناء للنظام الكواركي باستعمال نموذج بسيط لتفاعل الكوارك - كوارك وفقا للنظرية الكمية اللونية ونظرية الاضطراب باستخدام الاعتبارات الكمية. تم تحديد المعدل الكلي لانتقال الفوتونات الناتجة لعملية الفناء وحسابه كدالة لثابت الاقتران وزخم الانتقال وطاقة الفوتون ودرجة الحرارة الحرجة والطاقة الحرارية للنظام. احتمالية معدل انتقال الفوتون حسبت باستعمال قيمتين للطاقة الحرارية الحرجة Tc=144MeV وTc=170MeV مع عدد من قيم الطاقة الحراريةT=125MeV وT=188MeV وT=250MeV وT=310MeV نسبة الى زخم الانتقال. ان التقريب من الدرجة الاولى للنظرية الكمية اللونية ولفناء الكوارك - الكوارك المضاد تشير الى التباعد الاسي لمعدل الفوتونات العائدة لتفاعل كوارك - كوارك. وفقا لنظرية الاضطراب في درجات الحرارة العالية يتبين لنا تاثير الطاقة لتبادل الكلون على ظاهرتي كل من الحبس اللوني والتقارب الحر والتي توفر معدلات محددة. في هذه الاطروحة تظهر النتائج اثنين من السلوكيات المتميزة لتفاعل الكواركات وهي صفة الحبس والتقارب الحر اعتمادا على ثابت الاقتران. معدل الانتقال الفوتوني يزداد بتناقص ثابت الاقتران وبتناقص طاقة الفوتونات مع زيادة الطاقة الحرارية وانبعاث الفوتونات يكون كبير. من جهة اخرى فان معدل انتقال الفوتون يتناسب مع الطاقة الحرارية الحرجة ويزداد معدل انتقال الفوتون مع زيادة الطاقة الحرارية للنظام ويقل مع زيادة زخم الانتقال . | The transition of photons from a quark - quark interaction due to exchange gluon at high temperatures have been investigated and studied according on quantum chromodynamic theory QCD. This study focuses on the evaluation of the photon transition rate production in an annihilation processes for quarks system using a simple model of quark - quark interaction according on quantum chromodynamic theory and perturbation theory using a quantum consideration. Specifically, the total photons transition rate production at annihilation processes is evaluated as a function of the running strength coupling scaled ,momentum transfer P, photon energy E_γ, critical temperature Tc, and thermal energy T for system. The probability of photon transition rate ζ(α_s,E,T) have been evaluated using two values of critical temperature Tc =144 MeV, and Tc =170 MeV with many values of thermal energy T =125 MeV, T =188 MeV, T=250 and T =310 MeV relative to momentum transfer P=1 to 5 GeV. At first order approximation the quantum chromodynamic theory for quark - antiquark annihilation indicates to exponential divergent of photons yield rates for quark - quark interact. According to the perturbation theory at high temperature we show that effects of energy to the exchanged of gluon on the confinement and asymptotic freedom provide finite rates. In this thesis, results exhibit the two distinct behaviors of quarks state interaction which are described as confinement and deconfinement depending on the running coupling strength α_s (T). The rate transition of photons is increasing at decreasing of running coupling strength α_s (T) and decreases of the photon energy E_γ, with the increase of thermal energy T and emitting photon would be large. On the other hand the photon transition rate proportional to the critical temperature and the photon transition rate increase with the increase of the temperature and decrease with the decrease of momentum transfer

التوصيلية الضوئية للمفرق الهجين a - GaAs : Zn/c - Si == Photoconductivity of a - GaAs : Zn/c - Si Heterojunction

اسم المؤلف: ايمان كاظم جبر
اسم المشرف: حسين خزعل رشيد | رامز احمد الانصاري
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: حضرت اغشيه زرنيخات الكاليوم المشوب بعنصر الزنك بنسبة 1% GaAs : Zn باسماك مختلفة mµ(1.0 ,0.75 ,0.5 ,0.25) بتقنية التبخير الوميضي على ارضيات زجاجية ورقائق من c - Si بدرجة حرارة الغرفـة وتحت ضغط فراغي 10 - 5 mbar وبمعدل ترسيب مقارب الى 0.92Å/s لدنت هذه الاغشية بدرجات حرارة تلدين مختلفة K(373, 473 ) لمدة ساعة واحدة ولدراسة الخواص التركيبية تم تلدين اغشية زرنيخ الكاليوم المشوبة بالزنك والمرسبة على الزجاج بسمك mµ0.5 الى درجة حرارة and773)K473,373).تم دراسة الخواص التركيبية للاغشية المحضرة على ارضيات زجاجية بواسطة حيود الاشعة السينية XRD وقد اظهرت نتائج حيود الاشعة السينية ان الاغشية الملدنة بدرجة حرارة اقل من 473K ذات تركيب عشوائي وبزيادة درجة حرارة التلدين اصبح التركيب متعدد التبلور F.c.c عند درجة حرارة 473K وبالاتجاه المفضل (111) ,اما دراسة خصائص السطح المورفولوجية بواسطة مجهر القوة الذري (AFM) , فقد وجد ان خشونة السطح تقل مع زيادة درجة الحرارة التلدين وتزداد مع زيادة السمك اما الحجم الحبيبي فوجد انه يزداد مع زيادة درجة حرارة التلدين والسمك.درست الخصائص الكهربائيــة للاغشية المحضرة على ارضيات زجاجية بتغير السمك ودرجة حرارة التلدين حيث ازدادت التوصيلية الكهربائية المستمرة (2.05 - 59.3) 10 - 3 (.cm) - 1 لجميع الاغشية المرسبة بزيادة السمك وبدرجة حرارة الغرفة قلت (15.1 - 2.39) 10 - 3 (.cm) - 1 بزيادة درجة حرارة التلدين من (RT - 473)K للاغشية ذات سمك 0.5mm، قلت طاقات التنشيط الكهربائية (Ea1& Ea2)بزيادة سمك الغشاء وزادت بزيادة درجة حرارة التلدين (RT - 473)K. اظهرت قياسات التوصيلية المتناوبة لاغشية الـ GaAs : Zn باسماك مختلفة وبدرجات حرارة تلدين مختلفة بانها تنطبق مع نموذج تنطط الحاجز المرتبط(CBH) . وبينت قياسات هول الى ان جميع الاغشية هي من النوع (p - type)، وتركيز الحاملات يزداد - 89.29 )×1016 cm - 3 (0.08 بزيادة سمك الغشاء وتقل (1.95 - 0.21)×1016 cm - 3 بزيادة درجة حرارة التلدين (RT - 473)K. وكذلك لاحظنزايادة قيم التحركية بزيادة درجة حرارة التلدين ,بينما تقل مع زيادة السمك.اظهرت القياسات البصرية لاغشية a - GaAs : Zn بان الانتقالات البصرية كانت مباشرة مسموحة ذات فجوة طاقة تزداد مع زيادة درجة حرارة التلدين بينما تقل مع زيادة السمك.قيست سعة الانحياز العكسي للمفرق الهجين a - GaAs : Zn/c - Si كدالة لفولتية الانحياز وبتردد 100KHz وقد دلت هذه النتائج على ان المفرق من النوع الحاد، لوحظ تناقص السعة بزيادة جهد الانحياز العكسي، وايضا لوحظ ان السعة تقل بزيادة سمك الغشاء وتتناقص مع زيادة درجة حرارة التلدينF/cm2(2.24 - 1.54) للسمك 0.5µm. وجد ايضا ان جهد البناء الداخلي للمفرق يتناقص 0.15)Volt (0.40 - عند زيادة السمك .درست خواص تيار - فولتية للمفرق الهجين a - GaAs : Zn/c - Si تحت ظروف الظلام وقد وجد بانها تتفق مع نموذج اعادة الاتحاد - الاختراق ، كذلك اظهرت النتائج ان كثافة التيارتقل بزيادة درجة حرارة التلدين وسمك الغشاء وذلك بسبب زيادة العيوب عند سطح المفرق. وعامل المثالية يزداد بزيادة سمك الغشاءمن(2.4 - 2.7). ومن خلال قياسات تيار - فولتية تحت ظروف الاضاءة وجدنا ان كثافة التيار الضوئي يزداد مع زيادة درجة حرارة التلدين ويقل مع زيادة السمك.درست خواص كثافة تيار الدائرة القصيرة وفولتية الدائرة المفتوحة حيث وجدنا ان ,Jsc Voc, تزداد قيمهم بزيادة درجة حرارة التلدين | GaAs weight doping percentage by 1% Zinc (GaAs : Zn) films have been deposited by flash evaporation technique on glass and c - Si wafer substrates at room temperature under vacuum of 10 - 5 mbar with rate of deposition near to 9.25Å/sec. These films of different thicknesses (0.25, 0.5, 0.75, 1.0) µm have been annealed at different temperatures Ta (373, 473)K for to study the properties of structure of a - GaAs : Zn films that deposited on glass substrate with thickness 0.5 µm annealed at (373, 473 and 773)K. The structural characteristic of the films prepared on glass substrates have been studied by using X - ray diffraction, which shows that the films have amorphous structure for sample annealed at Ta> 473K. The samples annealed at 473 K showed a polycrystalline with Face - Center cubic system preferred orientation along (111).The surface morphological characteristics were studied by atomic force microscope (AFM) which show that decreased in surface roughness with increasing annealing temperature and increased with thickness increases. The grain size increases with increasing annealing temperature and thickness.Electrical properties of the films prepared on glass substrates were studied with different thicknesses and annealing temperatures. The D.c conductivity for all deposited films increases from (2.05 to 59.3) 10 - 3 (.cm) - 1 with thickness increases at room temperature and decreases from(15.1 to 2.39) 10 - 3 (.cm) - 1 with increase of annealing temperature from RT to 473K for films of 0.5m. The electrical activation energies Ea1and Ea2 decrease with thickness increases and increasing with increasing of annealing temperature from room temperature to 473K. A.C conductivity measurements for GaAs : Zn films with different thickness and annealing temperatures were consistent with correlated barrier hopping model (CBH).Hall measurements showed that all the films are p - type with carrier's concentration increasing from( 0.08 to 89.29)×1016 (cm) - 3 with film thicknes increase and decreasing from (1.95 to 0.21)×1016 (cm) - 3 with increasing of annealing temperature from room temperature to 473K. Also we observe that the mobility values decreases with thickness increases and increasing with increasing of annealing temperature. The optical measurement showed that the nature of the optical transition has been direct allowed with band gap energies increases with increasing of annealing temperature while decreases with increases of film thickness.The reverse bias capacitance for a - GaAs : Zn/c - Si heterojunction was measured as a function of bias voltage at frequency 100 KHz, and it is indicated that these heterojunction are abrupt. The capacitance decreases with increasing the reverse bias voltage, also decreasing with increasing annealing temperatures from (2.24 to1.54) ×10 - 7 F/cm2 for film thickness 0.5 µm and with increasing film thickness.The value of built - in potential for heterojunction decreases from (0.4 to 0.15) Volt with increasing of thickness.while increases with increasing temperature from (0.3 - 0.4) Volt for film thickness 0.5 µm.The J - V characteristics of the a - GaAs : Zn/c - Si heterojunction under dark have been studied under dark condtion. This may be in agreement with tunneling recombination model. Furthermore, the product shows that the current density decreases with the increasing of annealing temperature and film thickness for the increases in the defects at heterojunction interface. The ideality factor increases with the increasing film thicknes from (2.4 to 2.7). Under illumination, the photocurrent density increases with increases of annealing temperatures and it decreases with the increases of thickness. The short - circuit current density and open - circuit voltage have been studied where the Jsc ,Voc , increase with the increasing of annealing temperatures

بناء منظومة بلازما حاجز الجهد العازل الانتاج البلازما ودراسة تاثيرها على الدم باستخدام معالجة الصور == Construction of Plasma system of Dielectric Barrier Discharge to study its effects on the Blood using Image processing

اسم المؤلف: ايمان عبد الستار الحميدي
اسم المشرف: حامد حافظ مربط | علياء حسين علي
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: In this study, construction the Dielectric Barrier Discharge system (DBD) to produce cold the Plasma was done. The electrical characteristic of the system were studied, the characteristic (Current - Voltages) curve and the effect of (frequency, the distance between electrodes, thickness of dielectric and type of dielectric material) on the value of the discharge current (I) and breakdown voltage have been studied. It was found that each of the discharge current and breakdown voltage increases with increasing gap distance, it was observed that the value of the breakdown voltage in the case of using a Teflon as a dielectric than is higher when using a glass as a dielectric. It is found that the discharge current and breakdown voltage increases with increasing gap space and the thickness of the dielectric material. Also, it's observed that the discharge current increases with increasing frequency of the applied voltage.The total number of prepared sample were (176) all are chosen for men they ages are between (20 - 40) years. The samples have been as follows (healthy, infected with high blood pressure, smokers and diabetes). The samples have been exposured to cold plasma for different periods between (2 - 50) sec. The image for all samples have been captured using Optical microscope. Every image have been studied with image processing programs by using (Mat lab - 2010).To extracted effect of Plasma on the texture of the Blood by using different methods .Histogram for First Class (First - Order Histogram) ,Gray level Co - occurrence matrix (GLCM) (Second - Order Co - occurrencematrix) and masks Law (Law's Mask) a statically features have been calculated for each method to study the effect of Plasma on the Blood texture.It is found that the Cold plasma effect on blood samples each of (smokers, diabetes ) It was Limited and does not appear Significant changein the image texture , and the Cold plasma effect on blood samples each of ( healthy , infected with high blood pressure ) can be seen through the change in the image texture .

دراسة فقدان الطاقة لحزمة ايون الهيدروجين في الحمض النووي والماء == Studying Energy Loss of Hydrogen Ions Beam in DNA and H2O

اسم المؤلف: اوفى زهير خضير
اسم المشرف: خالد عبد الوهاب احمد | رياض خليل احمد
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The energy delivered by a swift proton beam in materials of interest to hadron therapy (DNA and liquid water) is investigated in the present work. An explicit condensed - state description of the target excitation spectrum based on the dielectric formalism is used to calculate the energy - loss rate of the beam in the irradiated materials.The present work focus on : (i) Calculations of the energy loss, the probability P(E,T) of electronic excitation produced by proton, the average energy <E> transferred to the targets by electronic excitation, Partial Stopping Power, Effective Charge (PSPEC) using the dielectric function (PPA) to describe the excitation spectrum of DNA and H2O. Results show that the protons with energy between 0.05 MeV to 2.5 MeV are very efficient in producing secondary electrons in DNA and H2O, which are able to produce strand breaks and could be very effective for the biological damage of malignant cells.The ionization potential (the so - called I - value) is the most important material quantity in the calculation of the electronic stopping power of energetic ions (>1 MeV u−1) has been evaluated through Bethe’s formula and represents its main source of uncertainty at high energies, I DNA found to be 80.01 and I H2O .(ii) Calculation of shell correction of swift proton has been done by adopting (PPA) dielectric function of DNA and Liquid water targets. As well as calculations of shell correction using HO - GOS, KT - IM and FEG - ELF models, and compared the results come from three models.I(iii) Barkas effect, ( L1) and Bloch correction ( L2) for penetrating proton in DNA and Liquid water have been calculated using (KT, HO and FEG) moels, where the Bethe - Bloch parameters like, Barkas effect, Z 1L 1, Bloch correction, and Shell correction, ⁄ are unknown for DNA and liquid water.Results for protons impacting in the most representative biological targets (such as water or DNA components) show a very good comparison with experimental data. Because of its simplicity and great predictive effectiveness, the method can be immediately extended to any combination of biological target and charged particle of interest in ion beam cancer therapy.The equations of theoretical formulas for interesting physical quantities are programmed in a programs AuFa - H - DNA.for and AuFa - H - H2O.for , [see the flow charts in Appendix A] which contains some subroutines have been written in Fortran - 90 for the numerical calculations.

دراسة النشاط الاشعاعي لعضوين بشريين الثدي والرحم باستخدام كواشف الاثر CR - 39 واللكسان == Studying The Radioactivity In Two Human Organs Breast And Uterus Using CR - 39 And Lexan Track Detectors

اسم المؤلف: انعام ياسين حسن
اسم المشرف: ندى فرحان كاظم
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: استخدمت تقنية التنشيط بالتشعيع النيوتروني لتحديد تراكيز اليورنيوم الموجودة في عينات الانسجة البشرية التي تم دراستها في هذا البحث (رحم , ثدي) وذلك عن طريق تشعيع النماذج بعد تحضيرها وكبسها الى اقراص صغيره بقطر (2cm) وسمك (1mm) ووضعها بين قطعتين من كواشف الاثر للحاله الصلبه المستخدمة في هذا البحث وهي كاشفي (CR - 39) واللكسان.تم تشعيع النماذج المحضره (كاشف - عينه - كاشف) بالنيوترونات المنبعثة من المصدر النيوتروني النظائري (امريشيوم 241 - بريليوم) ذو الفعالية الاشعاعية (38mCi) لاجل شطر اليورانيوم الموجود في العينات وتسجيل اثار شظايا الانشطار على الكاشف. تم في هذا البحث ايضا اختبار ازمان مختلفة للقشط الكيميائي لاجل الوصول الى زمن القشط المناسب لاضهار اثار شظايا الانشطار لكلا الكاشفين المستخدمين مره باستخدام الحمام المائي واخرى باستخدام الميكروويف (لاول مره في هذا البحث). وقد تبين ان افضل زمن قشط لكاشف CR - 39)) (30min)عند استخدام الحمام المائي و(8min) عند استخدام المايكروويف ولكاشف الليكسان (60 min ) عند استخدم الحمام المائي و(5 min ) عند استخدام الميكروويف.وقد اتضح ان عدد الاثار التي ظهرت باستخدام الميكروويف كانت اقل بقليل من التي ظهرت باستخدم الحمام المائي لكنها اكثر وضوحا. بينت هذه الدراسة ان متوسط تراكيز اليورانيوم في نسيج الرحم المحسوبة باستخدام كاشف CR - 39 المقشوط كميائيا باستخدام الحمام المائي هي (0.062ppm) وللكشف المقشوط باستخدام الميكروويف هي (0.047ppm). في حين كانت التراكيز في نفس النسيج المحسوبة باستخدام كاشف الليكسان المقشوط باستخدام الحمام المائي هو( (0.054ppmوللمقشوط باستخدام الميكروويف هي .(0.047 ppm)كما بينت الدراسة ايضا ان متوسط تراكيز اليورانيوم في نسيج الثدي عند استخدام كاشف CR - 39 المقشوط كميائيا باستخدام الحمام المائي 0.060ppm))وللمقشوط باستخدام المايكروويف هي(0.039 ppm). في حين كانت التراكيز من نفس النسيج المحسوبه باستخدام كاشف الليكسان المقشوط باستخدام الحمام المائي (0.034ppm) وللكواشف المقشوطه باستخدام الميكروويف .(0.040ppm) | Neutron activation technique irradiation is used to determine uranium concentration in human tissues samples (uterus, breast) that have been studied in this research through irradiation samples with neutron source (241Am - Be) after prepared into small disk diameter (2cm) with thickness (1mm) and inserted between two pieces of solid state nuclear track detector (CR - 39,Lexan) used in this research. The samples have been irradiation (detector - sample - detector) with neutron emitted from isotopic neutron source (241Am - Be) with activity (38mCi) to fission uranium in the samples and registrar fission fragment tracks on the detector. CR - 39 and Lexan track detectors etched using (NaOH) with normality (6.25N) at different etching time using water bath and microwave. In this research we found the optimum etching time for CR - 39 is (30 min) when using water bath and (8 min) when using microwave. While for lexan detector is (60 min) when using water bath and (5 min) when using micro wave, and also the number of tracks which appear by using microwave is slightly less and clear than that appear by using water bath. This study shows that the average uranium concentration in uterus tissues when CR - 39 detector used in water bath is (0.062ppm) and detector etching by using microwave is (0.047ppm),While the average concentrations using lexan detector when used water bath is (0.054ppm) and etching by using microwave is (0.047 ppm). This study is shows also the average uranium concentrations in breast tissues when CR - 39 detector used in water bath etching is (0.060ppm) and by microwave etching (0.039ppm) and the concentrations using lexan detector when used water bath is (0.043ppm) and etching by using microwave is (0.040 ppm).

تصميم متحسسات الياف بصرية للكياسات البيئية == Design of Optical Fiber Sensors for Environmental Measurements

اسم المؤلف: الهام كاظم اونيس
اسم المشرف: محمد صالح مهدي | رياض خليل احمد
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: This study includes two main parts to design and study uniform and apodized fiber Bragg grating. The first part include simulation method by using optigrating 4.2 software in order to get the transmission and reflection spectrum for the FBG, also to give high accurate for analysis the characteristics of the FBG. The work of the software based on coupled mode theory which used the T - Matrix to solve its equations.The simulation study includes designed a uniform and Apodized fiber Bragg grating and studying the effect of increasing grating length on the reflectivity for them. The results show that, increasing grating length for uniform FBG for (L= 05 - - - 40mm) causes to increase the reflectivity to (99.99%) at (L=28mm), but increase in the reflectivity of side lobes which can reduce it by using apodization method in order to reduce the refractive index change towards the ends of the grating. After that, if the length is increased further, it is observed that the maximum reflectivity maintains the same value of (99.99%). The results for the effect of increasing grating length on the bandwidth show that, the value of the bandwidth decreased until achieved (0.01062nm) at grating length 28mm, then stay at this value for longer length.The simulation results for the Apodized FBG show the same behavior as the results of the uniform FBG but without side lobes. The effect of the increasing index modulation on the reflection spectrum was studied for the uniform FBG, from the results we observed that increasing in index modulation causes increasing in the reflectivity, where at the weak grating (1*10 - 4), the reflectivity was low and at the strong grating (4*10 - 4), the reflectivity was high.IIIIn addition, the study includes designing a sensor for a temperature and strain for uniform and apodized FBG. A uniform single temperature sensor is designed at grating length 10mm, the simulation result shows that, the center wavelength shifts with increasing temperature for (25 - 80˚C). The calculated temperature sensitivity for this sensor is (13.8 pm/˚C), Depending on the results we calculate the estimated temperature accuracy which is (± 0.33˚C).Again we design a sensor for the temperature but for array sensor, the results show that, the array sensor will not reflect Bragg wavelength at the same time when the temperature increasing because we take different value of grating period for each fiber in the array sensor. The temperature sensitivity for this sensor is (mean 13.76pm/˚C), and the estimated temperature accuracy is (mean ± 0.73˚C). From the comparison between the single and array sensors, we find that, the single FBG sensor system is more accurate compare to the array sensor, but in term of advantage FBG sensor array system have more advantage compare to the single FBG sensor.The simulation study for apodized FBG temperature sensor gives the same behavior as the uniform single FBG sensor but without side lobes. The results show that, there is no effect of increasing temperature on the bandwidth for the sensor. The strain sensor is designed for the uniform FBG at length 10mm; the results show that, increasing Bragg wavelength for applied strain for (200 - 2600με).The second part for the study includes designing and studying a temperature sensor by using experimental method. The experimental results show that, the reflection and transmission spectrum is at (1553.764nm) and increasing with increasing temperature from 25˚C to 80˚C. The measured temperature sensitivity for the sensor is (13.7 pm/˚C), while the theoretical is (14.2 pm/˚C). The estimated temperature accuracy for the sensor is calculated and is (± 0.32˚C).

دراسة تاثير البلازما غير الحرارية على الخصائص التركيبية والبصرية لاغشية SnO2

اسم المؤلف: الاء خميس برد علوان
اسم المشرف: حامد حافظ مربط
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الدراسة تم استخدام منظومة بلازما الحاجز العازل (DBD _system) لدراسة تاثير البلازما غير الحرارية في الخصائص التركيبية والبصرية لاغشية اوكسيد القصدير SnO2 المحضرة بطريقة الرش الكيميائي الحراري, تتكون هذه المنظومة من قطبين مصنوعين من النحاس محاطين بمادة عازلة من التفلون , يربط قطبا المنظومة الى طرفي محولة عالية الفولتية متغيرة (1 - 15) كيلو فولت ,وتعمل بفولتية ادخال 220 فولت وذات تردد 50 هيرتز وفولتية اخراج 15 كيلو فولت . تم تحضير اغشية ثنائي اوكسيد القصدير (SnO2) الرقيقة بطريقة الرش الكيميائي الحراري ذات سمك mμ 0.725 من خلال رش محلول مكون من كلوريدات القصدير المائية (SnCl4. 5H2O) المذابة في الماء المقطر بتركيز 0.1M وعلى قواعد زجاجية بدرجة حرارة 450˚C . تم تشخيص الخصائص التركيبية للاغشية من خلال دراسة نمط حيود الاشعة السينية (XRD) .اذ اظهرت النتائج ان اغشية ثنائي اوكسيد القصدير ذات تر كيب متعدد التبلور ومن النوع الرباعي مع هيمنة الاتجاه (110) . ووجد ان هذا التركيب لم يتاثر بالبلازما غير الحرارية اي انه لم يلاحظ اي تغير في الخواص التركيبية للغشاء حين عرضت الاغشية المحضرة لبلازما غير الحرارية المنتجة من منظومة الحاجز العازل ولازمان مختلفة (10,8,6,4,2) دقيقة وكذلك تم دراسة علم التشكل وخشونة السطح للاغشية المحضرة في بحثنا هذا سجلت صور سطح التشكل بواسطة جهاز AFM وقد وجد ان هناك تباين في قيم الحجم الحبيبي حيث انها تتغير مع زيادة زمن التعريض للبلازما .تمت دراسة الخواص البصرية للاغشية المحضرة من خلال تسجيل طيف النفاذية ، ولمدى الاطوال الموجية (300 - 1100)nm، كما وجد ان الانتقالات الالكترونية عند حافة الامتصاص الاساسية كانت من النوع المباشر المسموح. ولوحظ ايضا تباين في قيم فجوة الطاقة حيث انها تتغير مع زيادة زمن التعريض للبلازما . كما استعمل طيف النفاذية في ايجاد الانعكاسية والامتصاصية ومعامل الامتصاص والثوابت البصرية المتضمنة معامل الانكسار، ومعامل الخمود، والجزء الحقيقي والخيالي لثابت العزل وكذلك ايجاد التوصيلية البصرية .وجد بان كل من الامتصاصية ومعامل الامتصاص ومعامل الخمود والجزء الخيالي من ثابت العزل والتوصيلية البصرية تزداد مع زيادة زمن التعريض للبلازما, بينما تقل كل من النفاذية والانعكاسية والجزء الحقيقي من ثابت العزل ومعامل الانكسار مع زيادة زمن التعريض للبلازما | In this study, the use of plasma dielectric barrier system (DBD _system) to study the non - thermal plasma effect on the structural and optical properties of tin oxide SnO2 films prepared by Chemical Spray pyrolysis , this system consists of two electrodes Mades of copper surrounded by insulating material Teflon, connects the pole system to both ends of a converted high - voltage variable (1 - 15) kV, type (Ac) and change voltages beyond the converted (voltage introduction of 220 volts, frequency 50 Hz, and the voltage output of 15 kV) by changing the input voltage it by linking it to equipped voltage alternating variable (0 - 220) volts. Tin oxide (SnO2) thin films were prepared by Chemical Spray pyrolysis way through a Solution spray consisting of tin chlorides water (SnCl4. 5H2O) dissolved in distilled water concentration (0.1M) and the rules on a glass 450˚C degree heat. It was diagnosed with structural properties of the films through the study of X - ray diffraction pattern (XRD) . As the results show that the tin oxide films binary tree with multi - Cape gelling and It is kind quartet with the dominance of direction (110) . It was found that this installation was not affected by any non - thermal plasma that not noticed any change in the structural properties of the films. Films prepared Offered to non - thermal plasma producer from dielectric barrier system and different times (0,2,4,6,8,10) minutes and The atomic force microscope (AFM) images shows that the (Roughness Average, Average Diameter and the square root of the average roughness square (RMS)) all of the film (SnO2) decreased and increase with increase Time exposure to Non - Thermal Plasma . Optical Properties for films prepared were studied by recording the spectral transmittance and absorbance, to the extent wavelengths (300 - 900) nm, also found that the electronic transfer at the edge of the fundamental absorption was one of the allowed direct kind. It was also noted an increase and decrease in the value of the energy gap with increasing time of exposure to plasma. Absorbance and Transmtion spectra have also been used to find the reflective optical constants included refractive index, and the coefficient of Extinction, the real and the imaginary part of the dielectric constant and optical connectivity. Found that all of the absorbance , the coefficient of absorption , Extinction coefficient , the imaginary part of the dielectric constant and optical conductivity increases with increasing exposure to plasma time, while at least each of the transmittance , reflectivity ,real part of the dielectric constant and the refractive index decreases with an increased exposure to plasma time

حساب الحاصل النيوتروني للتفاعلات (?,n) و(p,n) لبعض النوى المتوسطة لمدى طاقي (50 - 100 MeV) باعتماد المعادلات شبه التجريبية == Neutron Yield Calculations for (?,n) and (p,n) reactions for Some Intermediate Nuclides in the Energy rang (50 - 100MeV)by using Semi - empirical formula

اسم المؤلف: اسيل عادل يوسف
اسم المشرف: خالد هادي مهدي العبيدي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ان اغلب المقاطع العرضية لاغلب النظائر المشعة تكون مفقودة عند طاقات معينه في المختبرات العالمية ، لذا تم استخراج مجموعة صيغ رياضية شبه تجريبية موحدة لحساب الحاصل النيوتروني بالاعتماد على العدد الكتلي للنظير وطاقة القذيفة ، اما طاقة منفردة او مدى من الطاقات . تم العمل على جمع بيانات المقاطع العرضية مقابل الطاقات للمدى (50 - 100 MeV)من المختبرات العالمية (Koning , A . J . ; TENDL - 2010 - 2012) لنوعين من التفاعل (α,n) و(p,n) مع نظائر اربعة عناصر( 33As, Fe26 , Mn25 ، (32Geلكل عنصر عشرة نظائر فيصبح مجموع التفاعلات اربعين تفاعل كما تم حساب قدرة الايقاف للبروتون ولجسيمة الفا بوساطة برنامج (SRIM - program - 2013)، ومن ثم حساب الحاصل النيتروني باستخدام برنامج (الماتلاب2008a)، وهو مصمم لهذا الغرض ، تم حساب طاقة اللاتناظر لكل نظير ومن ثم استخراج صيغ رياضية من خلال افضل عملية ملائمة (fitting) بين طاقة اللاتناظر والحاصل النيوتروني للتفاعل عند الطاقات (50,60,70,80,90,100 MeV) لاهداف نوى متوسطة مختلفة . وضعت المعلمات الاولية المستخرجة من الصيغ الرياضية في جداول ، ورسمت العلاقة بين كل مجموعة معلمات والطاقة المقابلة لها لغرض استخراج معادلات موحدة ، والتي من خلالها تم ادخال متغير الطاقة في المعادلة الاساسية المستخرجة ، وبعد رسم العلاقات وجدنا المقاطع العرضية للتفاعل (α,n) اصغر من التفاعل (p,n) ، وان الحاصل النيوتروني يزداد مع زيادة طاقة الجسيم الساقط وتناقص العدد الكتلي ، وان النتائج المحصلة من الصيغ الرياضية الجديدة المعتمدة على القيم العملية في تطابق جيد مع النتائج النظرية المنشورة . | cross sections for many reactions for most of isotopes with different energies in international laboratories were missed so we get a mathematical semi - empirical equations for calculating the neutron yield depending on mass number of target and projectile energy (single enrgy or range of energy ) . Data of cross sections were collected from international libraries (TENDL,Kong) from 2010 to 2012 for tow types of reaction (α,n) and (p,n) for energies (50 - 100MeV) with ten isotopes of (33As , 26Fe , 25Mn , 32Ge) elements , that is mean the total number of reaction will [40] reaction , then stopping power for proton and alpha particle were uese calculated using SRIM program 2013 then neutron yield was calculation using Matlab program 2008a designed for this purpose so as asymmetry energy for each isotope then by fitting relation of asymmetry energy with neutron yield for, the reaction at energies (50,60,70,80,90,100) MeV with intermediate nuclide we get . The parameters were tables and from their relations with energy we get final set of semi - empirical equations, then it was drown , we from this fingers we concluded that the cross sections for (α,n) reactions were less than (p,n) reactions and the neutron yield in cress with increasing the projectile energies and with decreasing of atomic number all the results that got from this new semi - empirical equations that we got from experiment data was in good agreements with published the data .

تحديد حجم الجسيمة وانفعال الشبيكة من خلال تحليل توسيع الذروة لحيود الاشعة السينية لجسيمات اوكسيد الزنك النانوية == Restriction of Particle Size and Lattice Strain through X_Ray Diffraction Peak Broadening Analysis of Zinc Oxide Nano_Particles

اسم المؤلف: احمد علاء احسان
اسم المشرف: خالد هلال حربي
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الدراسة تم تحديد حجم البلرة وانفعال الشبيكة لجسيمات اوكسيد الزنك النانوية باستخدام طريقتي التباين والعرض المتكامل ، واستخدمت ايضا بعض الطرق الاخرى مثل شيرر ويليامسون - هال لحساب المعلمات اعلاه. ثم تحسب كثافة الانخلاع ، مساحة السطح ودرست سلوك حجم البلرة انفعال الشبيكة مع درجات حرارة مختلفة باستخدام طريقة التباين. تم في هذه الدراسة تطوير طريقة التباين من خلال تقديم ثلاثة نماذج جديدة هي نموذج التباين التشوه المتماثل (UDVM),نموذج التباين اجهاد التشوه المتماثل (UDSVM) ونموذج التباين كثافة الطاقة التشوه المتماثل (UDEDVM) لتحديد المعلمات الشبيكة مثل حجم البلرة ، انفعال الشبيكة ، والاجهاد، وكثافة الطاقة للمرة الاولى. في طريقة التباين حسبنا قيم حجم البلرة ومربع متوسط الانفعال هي (22.276 nm) و(0.133473 x 10 - 3) على التوالي, ثم حسبنا قيم حجم البلرة وانفعال الشبيكة هي (22.276 nm) و(14.47962 x 10 - 3) على التوالي بواسطة استخدام , UDVM قيم كل من حجم البلرة, الاجهاد وانفعال الشبيكة (22.276 nm), (3.7266 x 10 - 3 TPa) و(14.48006 x 10 - 3) التوالي بواسطة استخدام ,UDSVM قيم كل من حجم البلرة, كثافة الطاقة , انفعال الشبيكة والاجهاد (22.276 nm), (21689.7 KJ/m3) , (14.48024 x 10 - 3) و(2.9957 x 10 - 3 TPa) التوالي بواسطة استخدام .UDEDVM في طريقة العرض المتكامل حسبنا قيم حجم البلرة وانفعال الشبيكة هي (25.126 nm) و(2.443 x 10 - 3) على التوالي. في طرق اخرى مثل شيرار (Scherrer) التي تعطي قيمة حجم البلرة هي (17.622 nm) وقيمة انفعال الشبيكة هي (6.0362 x 10 - 3), بينما ويليمسن - هال (Williamson - Hall) التي تعطي قيمة حجم البلرة هي (22.063 nm) وقيمة انفعال الشبيكة هي (1.19225 x 10 - 3), حددنا قيمة كثافة الانخلاع والتي هي (7.912 x 1015 lines/m2) بواسطة استخدام نتائج طريقة التباين وحددنا قيمة مساحة السطح والتي هي (4.801 x 104 m2/g). وقد استخدمت طريقة التباين لتحديد التغير في قيم حجم البلرة وو مربع متوسط الانفعال في درجات حرارة مختلفة (80 ، 300 ، 350 و400) درجة مئوية. | The lattice strain and crystallite size of ZnO nanoparticles have been determined by using variance and integral breadth methods, and also used some other methods such as Scherrer and Williamson - Hall to calculate above parameters. Then calculated dislocation density, surface area and studied the behavior of crystallite size and lattice strain at different temperatures by using variance method. In this study the variance method have been developed by presenting three new models (The Uniform Deformation Variance Model UDVM, The Uniform Deformation stress Variance Model UDSVM and The Uniform Deformation Energy Density of Variance Model UDEDVM) to determine lattice parameters such as particle size, microstrain, energy density and stress for the first time. By variance method we have calculated the values of crystallite size and mean square strain are (22.276 nm) and (0.133473 x 10 - 3) respectively. Then we have calculated the values of crystallite size is (22.276 nm) and lattice strain is (14.47962 x 10 - 3) by using UDVM, the values of crystallite size is (22.276 nm), stress is (3.7266 x 10 - 3 TPa) and lattice strain is (14.48006 x 10 - 3) by using UDSVM and the values of crystallite size, stress, energy density and lattice strain (22.276 nm), (2.9957 x 10 - 3 TPa), (21689.7 KJ/m3) and (14.48024 x 10 - 3) respectively by using UDEDVM. In integral breadth method we have calculated the values of crystallite size and lattice strain are (25.126 nm) and (2.443 x 10 - 3) respectively. The other methods such as Scherrer which gives the value of crystallite size is (17.622 nm) and lattice strain is (6.0362 x 10 - 3), while the Williamson - Hall gives the crystallite size is (22.063 nm) and the lattice strain is (1.19225 x 10 - 3). We have determined the value of dislocation density which it is (7.912 x 1015 lines /m2 ) by using the results of variance method and determined the value of surface area which it is (4.801 x 104 m2/g) by using the results of variance method. Have been used variance method to determine the change in values of crystallite size and mean square strain at different temperatures (80, 300, 350 and 400) oC

تاثير اضافة بولي اثيلين اوكسايد على خصائص بعض البوليمرات في التطبيقات الطبية == Influence of Adding Polyethylene Oxide on Some Polymer Properties for Medical Applications

اسم المؤلف: احمد شاكر حسين كحيط
اسم المشرف: رحيم كعيد كاظم حسين المرشدي
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تضمنت الاطروحة دراسة الخصائص الفيزيائية لبوليمر بولي اثيلين اوكسايد (PEO) باستخدام المذيب ثنائي ميثيل الفورماميد (DMF) باستخدام تراكيز مختلفة (0.1% - 0.8% ) (غم / مل) قبل وبعد اضافة بعض البوليمرات ومن هذه البوليمرات بوليمر بولي اثيلين كلايكول (PEG) والبوليمر بولي مثيل ميثاكريليت ( PMMA) باوزان مختلفة. وتم دراسة الخصائص الريولوجية والبصرية والميكانيكية والكهربائية للنماذج المحضرة السائلة والصلبة حيث : تم قياس الخصائص الريولوجية للعينات مثل (الكثافة واللزوجة القصية)، ثم تم قياس انواع اخرى من اللزوجة مثل اللزوجة النسبية , اللزوجة النوعية , اللزوجة المختزلة , اللزوجة الذاتية ، اما معدل اللزوجة للوزن الجزيئي ونصف القطر الجزيئي الفعال فقد تم حسابها نظريا.وكذلك تم قياس الخصائص البصرية مثل (الامتصاصية ومعامل الانكسار)، ثم من هذه الخصائص تم حساب الخصائص الاخرى مثل (النفاذية ، الانعكاسية ، ومعامل الامتصاص للموجات الكهرومغناطيسية ، وزمن العمر الطبيعي، ومعامل الرقة ، الانعكاس المولاري، الزاوية الحرجة وزاوية بروستر).وايضا تم قياس الخصائص الميكانيكية مثل السرعة للموجات فوق الصوتية والتي تم قياسها على تردد ثابت قيمته (25 كيلو هرتز) اما الخصائص الاخرى تم حسابها نظريا , مثل : معامل الامتصاص للموجات فوق الصوتية , زمن الاسترخاء , سعة الاسترخاء , الانضغاطية , معامل المرونـة الحجمي , الممانعة الصوتية النوعـــية .بالنسبة للخصائص الكهربائية تم قياسها مثل التوصيلة الكهربائية ، وبالتالي حسبت الخصائص الاخرى مثل التوصيلية المولارية ودرجة التفكك . وقد تم قياس كل هذه الخصائص لحالتين قبل وبعد الاضافة في درجة حرارة الغرفة .واظهرت النتائج ان الخصائص السابقة تزداد مع زيادة التركيز باستثناء اللزوجة الذاتية ، النفاذية، الانعكاسية المولارية، الزاوية الحرجة، الانضغاطية، التوصيلة المولارية ودرجة التفكك تتناقص مع زيادة التركيز.تم الحصول على نتائج جديدة لمزيج من البوليمر ولقد استخدمت هذه النتائج في جانب من التطبيقات الطبية ، والتي تضمنت الامتصاصية والنفاذية ، وكذلك من ناحية اخرى ، هناك جانب تم تطبيقه وهو ملاحظة تاثير اضافات البوليمرات على بكتيريا جلد الانسان عند استعمال ثلاثة انواع من البكتريا .حيث لاحظنا عدم تاثر البكتريا عند اضافة كل من بوليمر بولي اثيلين كلايكول وبوليمر بولي مثيل ميثاكريليت والمذيب ثنائي الميثيل فورماميد والمستحضر ( بصورة انفرادية) عند اخذ نسبة (1 : 1) لذلك تستخدم كمواد قابلة لامتصاص الاشعة فوق البنفسجية ولاتستخدم كمواد معقمة اما مايخص بوليمر بولي اثيلين اوكسايد فقد لاحظنا تاثر البكتريا به ولمسافة (15) ملم حيث يمكن استخدامه كمادة قابلة لامتصاص الاشعة فوق البنفسجية وكمادة معقمة ويعتبر هذا احد التطبيقات الطبية الجديدة ، لذلك هناك العديد من التطبيقات التجريبية في التطبيقات الطبية المختلفة التي تم الحصول عليها من هذه الدراسة ، مثال على ذلك : عندما نستعمل بولي اثيلين اوكسايد وكذلك عندما نضيف له بوليمر بولي اثيلين كلايكول والبوليمر بولي ميثاكريليت المثيل حيث تم اضافة المزيج الى ثلاثة انواع من مستحضرات التجميل ، وثلاثة انواع من مرهم المفاصل ونوعين من جل الشعر، وهذه المخاليط ادت الى تحسين الامتصاصية عن طريق زيادة امتصاص (الاشعة فوق البنفسجية ) وجعل الجلد اقل تهيجا.ونلاحظ كذلك ان فحوصات (FT - IR) للاطياف اظهرت عدم وجود تفاعل كيميائي بين ( (PEO الذي ووزنه الجزيئي (300000) ومضافاته حيث استخدمت تقنية اقراص (KBr)) لذلك.العلاقة بين الخصائص التي تمت دراستها والتطبيقات الطبية هو الفائدة من زيادة الامتصاصية وتقليل النفاذية حيث ان الفائدة في الاضافة لهذه المراهم للحد من امتصاص الجسم للاشعة فوق البنفسجية، فضلا عن خصائص الريولوجية التي تؤدي لزيادة اللزوجة للمراهم وبالتالي زيادة الكثافة ومعامل الانعكاس مما يقلل من نفاذية الاشعة (الاشعة فوق البنفسجية) للجسم، بالنسبة للخصائص الميكانيكية والكهربائية لوحظ تحسن كبير في هذه الخصائص التي يمكن استخدامها كبحوث وتطبيقات في المستقبل | The dissertation has included study of some physical properties of polymer polyethylene oxide (PEO) dissolved in Dimethylformamide (DMF) with different concentrations ranged from (0.1% - 0.8%) g./ml before and after adding Polymers such as polyethylene glycol (PEG ) and Poly(methyl methacrylate) (PMMA ) of different weights. The rheological, optical, mechanical, electrical properties for samples at prepared by liquid and solid have been studied and the study show : For rheological properties such as : (density and shear viscosity ),has been measured , then other types of viscosities are measured , such as : relative viscosity , specific viscosity , reduced viscosity , intrinsic viscosity. While for viscosity average molecular weight and effective molecular radius have been theoretically calculated. Also the optical properties had been measured such as ( absorbance and refractive index ), then from these properties were calculated optical parameters and optical constants such as ( transmittance, reflectance, absorption coefficient of electromagnetic waves, natural lifetime, coefficient of fineness, molar reflectance, critical angle and Brewster angle ). Also the mechanical properties of ultrasonic wave velocity at a constant frequency (25 kHz) has been measured and other properties were theoretically calculated such as : absorption coefficient of ultrasonic waves , relaxation time , relaxation amplitude , compressibility, bulk modulus , and specific acoustic impedance for ultrasonic waves. For the electrical properties have been measured such as electrical conductivity and other properties such as (molar conductivity and degree of dissociation) have been calculated after that.The results showed that previous properties have increment with the increase of concentration except reduced viscosity , transmittance , molar reflectance ,critical angle, compressibility, molar conductivity and degree of dissociation are decreasing with increasing of concentration . New results were obtained to a combination of polymer and these results have been utilized in the side of medical applications, which included the absorbance and transmittance, in the other hand, the effect of polymer addition on human skin has been applied according to a note , when using three types of bacteria . Where noticed the bacteria is not affected when adding each of the polymer (polyethylene glycol , Poly(methyl methacrylate)) , solvent Dimethylformamide and mixture when taking the ratio (1 : 1) individually , so it is used to absorb ultraviolet rays and not used as sterile . For polymer polyethylene oxide noticed effect on bacteria for distance (15) mm , where it can be used to absorb ultraviolet rays and sterile , this is one of the new medical applications , so there are many experimental applications in different medical applications obtained from this study, such as : The solutions of (PEO) , (PEO - PEG) and (PEO - PMMA) blends that have been added into three types of cosmetics, three types of ointment of joints and two types of hair gel , these blends enhance them by the increase of (UV) absorbance that makes less skin irritation. The (FT - IR) spectra showed that there was no interaction between (PEO) ( 300000 ) and all additives when it has prepared by (KBr) disks technique. The relationship between the properties that have been studied and medical applications in the usefulness increase absorbance and decreases transmittance that has to take advantage of it in the addendum to the ointments to reduce the body's absorption of (UV) rays , as well as rheological properties led to increase the viscosity of ointments and thereby increase the density and reflection coefficient which reduces the transmittance of (UV) rays to the body , for mechanical and electrical properties noticed a significant improvement in these properties, which can be used research and applications for the future

دراسة تطور الجسيمات داخل الغلاف الجوي باستخدام نظام المحاكاة AIRES == Studying of Air Shower Development by AIRES Simulation System

اسم المؤلف: احمد جمعة حبيب سالم الطائي
اسم المشرف: احمد عزيز الربيعي | بتول درعم بلاوة
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تمثل دراسة الاشعة الكونية ذات الطاقات العالية احد اكثر المواضيع تحديا في مجال الفيزياء الفلكية. اذ ان تفاعل الجسيمات الاولية مع نوى ذرات الهواء داخل الغلاف الجوي الارضي تنتج كم هائل من الجسيمات الجوية. في هذا العمل تم اجراء المحاكاة لوابل من الجسيمات الجوية المشحونة (EAS) من خلال التحقق من معاملات التطور الطولي ( عدد الجسيمات المشحونة N واكبرعمق في الغلاف الجوي الارضي Xmax) باستخدام نظام محاكاة لجسيمات الهواء الذي يدعى يرنامج AIRES عند مدى الطاقة (1014 - 1019) الكترون فولت للجسيمات الاولية مثل (الالكترونات, البوزيترونات, البروتونات, جسيمات كاما, نوى ذرات الحديد) وزوايا السقوط (0o, 10o, 30o). ان محاكاة دالة التوزيع الجانبية (LDF) لوابل من الجسيمات الجوية تم اجراؤها باستخدام برنامج AIRES لطاقات اولية مختلفة, جسيمات اولية مختلفة وزوايا سقوط مختلفة. هذه المحاكاة يمكن ان تستعمل لاعادة بناء نوع وطاقة الجسيم المتولد من وابل من الجسيمات الجوية المشحونة والتي سجلت في منظومات عملية متعددة. لقد تم استخدام نموذج هتلر (Hitler's model) في حساب عدد الجسيمات المشحونة واعلى عمق جوي للتطور الطولي في الغلاف الجوي الارضي لعدد من الجسيمات الاولية المشحونة مثل (الميونات, البايونات, الالكترونات, البرتونات, الفوتونات ونوى ذرات الحديد) عند مدى الطاقة المذكوراعلاه الكترون فولت وزوايا السقوط المذكورة اعلاه . ان حساب دالة التوزيع الجانبية تمت باستخدام صيغةNishimura - Kamata Gresien (NGK)) ) ضمن مدى الطاقة المذكوراعلاه وزوايا سقوط مختلفة (0o, 10o, 30o, 40o, 50o, 60o). ولقد تم برمجة هذه الصيغ بلغة فورتران 90 وباستخدام Compaq Visual Fortran (CVF 6.6) ]لاحظ الملحق [A. وتمت المقارنة بين محاكاة التطور الطولي (N and Xmax) باستخدام نموذج SIBYLL الهادروني مع نموذجين هادرونيين مثل.(QGSJET99 and SIBYLL16) وقد اظهرت هذه المقارنة فرصة جيدة لتحديد سلسلة تفاعلات الاشعة الكونية مع نوى ذرات الهواء في الغلاف الجوي الارضي. ان المقارنة بين نتائج الحسابات النظرية ووالنتائج التجريبية لعدد الجسيمات المشحونة واكبر عمق في الغلاف الجوي للجسيمات الاولية مثل (البروتونات ونوى ذرات الحديد) قد اعطت نتائج جيدة ضمن مدى الطاقات العالية المذكور اعلاه. | The study of high energy cosmic rays represents one of the most challenging in the astroparticle physics fields. The interaction of primary particles with atmospheric nuclei produces huge Extensive Air Showers (EAS). In this work the simulation of EAS is performed by investigating the longitudinal development parameters (number of charged particles N and depth of shower maximum Xmax) using a system of air shower simulation which is called AIRES code at the energy range (1014 - 1019eV) for different primary particles like (electrons, positrons, protons, gamma particles and iron nuclei) and different zenith angles (0o, 10o and 30o). The simulation of the lateral distribution function in EAS is performed using AIRES code for different primary energies, different primary particles and different zenith angles. This simulation can be used to reconstruct the type and energy of the primary particles that generated EAS for charged particles that registered with different EAS arrays. Using Hitler's model the estimation of the number of charged particles and depth of shower maximum of longitudinal development in EAS is performed for different primary particles such us (muons, pions, electrons, protons, photons and iron nuclei) at the same energy range and for the zenith angles mentioned above. The calculation of the lateral distribution function of charged particles is fulfilled using Nishimura Kamata Greisen (NKG) formula in the same energy range above and different zenith angles (0o,10o,30o,400,50o and 60o). These formulas have been programmed by Fortran 90 with the aid of Compaq Visual Fortran (CVF 6.6)(see Appendix A). The comparison between the simulated longitudinal development of the number of charged particles and depth of shower maximum using SIBYLL hadronic model with two hadronic models like (QGSJET99 and SIBYLL16) has shown an opportunity for determination of cosmic ray cascade interactions in EAS. The comparison between the theoretical and experimental data of the number of charged particles and depth of shower maximum for primary particles like (protons and iron nuclei) in EAS gave a good agreement within the energy range mentioned above.

دراسة بعض خصائص فيرايت الاسبنل المحضر بطريقة السيراميك والسول جيل == Studying some Properties of Spinel Ferrite preparing by Ceramic and Sol - Gel Methods

اسم المؤلف: اثير ابراهيم عبد علي الخفاجي
اسم المشرف: كاظم جواد كاظم الشجيري
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: In this research three series of spinel ferrites samples where prepared which is copper - zinc ferrite with general formula (Cu1 - xZnxFe2O4), magnesium - zinc ferrite with general formula (Mg1 - xZnxFe2O4) and nickel - zinc ferrite with general formula (Ni1 - xZnxFe2O4) at (X) values ranging from 0.0 to 1.0, step of 0.2 where (X) represents the proportion of zinc in ferrite, using two preparation methods which is Conventional ceramic method and Sol - Gel method. Three sintering temperatures have been used which is (1000ºC), (1050ºC) and (1100ºC) to determine the effect of sintering temperature on the final specifications of the samples. (Network analyzer device) has been used to studding the microwaves absorption in the range of (X - band) with a frequency range (8 - 12.5 GHz). Also, X - ray diffraction analysis (XRD) has been used to determine the crystal structure and purity of the prepared samples and to calculate the average grain size and micro strain, The samples were examined using a scanning electron microscope device to evaluate the crystal size and to see distribution style after the sintering process, were Also, the density of the prepared samples were measured to calculate the porosity values.The results showed that the best samples with very high absorbency a long the (X - band) is (Mg0.6Zn0.4Fe2O4) and (Cu0.6Zn0.4Fe2O4) at sintering temperature (1100 ºC). This stability and efficiency observed firstly compared with other researches and literatures. Also the resonance peaks for all three types of spinel ferrite appeared at frequencies (8.6, 9.8, 10.0, 10.2, 11.01.11.2, 11.6, 12.0, 12.2) (GHz). X - ray diffraction results showed that all the prepared samples are a poly - crystalline also showed the occurrence of micro strain on the crystals due to effect of the sintering temperature on the crystals.Comparison between the samples prepared by Sol - Gel method and Conventional ceramic method; the result showed the homogeneity of particle size and particle distribution was the best for first method. Whereas the porosity was small for this method

تطوح فقدان الطاقة الجزئي للزركونيا والالومينيا للبروتون وحزم جسيمات الفا == Partial of Energy loss straggling of ZrO2 and Al2O3 for proton and ? - particle beams

اسم المؤلف: ابراهيم عباس ابراهيم الخزرجي
اسم المشرف: رياض خليل احمد العاني
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا العمل اجراء الحساب النظري لمقدار فقدان الطاقة (التطوح) للزركونيا〖(ZrO〗_2) والالومينيا (〖(Al〗_2 O_(3)) لحزم البروتون وجسيمات الفا الساقطة على هذه الاهداف وبطاقات . (T= 0.05, 0.25, 1, 2, 2.5 Mev/u) ان الصيغة لدالة العزل مثل قطب البلازمون التقريبي (PPA) وتعديلاتها من خلال نموذج درود( (Drude - model ، تم اعتمادها لحساب الاحتمالية للبروتونات وحزم جسيمات الفا المسببة للتهيجات الالكترونية في الاهداف المستعملة فقد حسبت مع الاخذ بنظر الاعتبار تاثير طول الحجب (Screening Length) والتي اظهرت توافقا جيدا مع نتائج حسابية تم التوصل اليها في دراسات سابقة، علاوة على حساب قدرة الايقاف الجزئي للشحنة الفعالة ζ(q) (PSPEC) للبروتونات وجسيمات الفا المتحركة خلال اكاسيد مختلفة وبشكل رئيسي بالهدفين المستخدمين في هذا العمل. وكذلك معدل الطاقة < E > ومربع معدل الطاقة للبروتون <〖 E〗^2> تم حسابها ايضا في عملنا الحالي .كما تم كتابة برنامج(Ibrahm - Al2O3.for) بلغة (الفورتران - 90) لاجراء الحسابات العددية موجود نسخة مرفقة منه. | The energy - loss straggling of zirconia (ZrO2) and alumina (Al2O3) has been determined theoretically for proton and alpha - particle beams with incident specific energies (T= 0.05, 0.25, 1, 2, 2.5) (Mev/u). The dielectric formalism like Plasmon Pole Approximation (PPA) and its modified form presentation by Drude - model has been used to calculate the probability for an energetic proton and alpha to produce electronic excitations in target of zirconia (ZrO2) and alumina (Al2O3), taking in consideration screening length effects and good agreement is achieved with previous work. The partial stopping power effective charge (PSPEC) , ζ(q) and partial energy straggling effective charge (PSGEC)η(q) for proton and alpha particle moving through several oxides, namely Al2O3, and ZrO2 have been calculated . Good agreement has been achieved with previous work. Also average energy, <E> and average of square energy <E^2> for proton and alpha particles in Al2O3 and ZrO2 have been calculated in present work.. A program (Ibrahm - Al2O3.for) has been written FORTRANT - 90 for numerical calculation, and a copy of program is available in the present work.

محاكاة العين البشرية باستخدام الخوارزمية الجينية == SIMULATION OF HUMAN EYE USING GENETIC ALGORITHEM

اسم المؤلف: لؤي عبد الصاحب رسول الطائي
اسم المشرف: سهى موسى خورشيد الاوسي | محمد صاحب الطائي
الموضوع العام: علوم الفيزياء
السنة: 2010
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The aim of this research is simulate an optical system for the human eye using Genetic algorithm. The considered optical characteristics of the optical system simulator include spot size (Z), spot diagram, and effective focal length (EFL). These characteristics are determined with the aid of some mathematical relations, which give the efficiency and accuracy of the adopted optical system design. The work has been performed in two stages : In the first stage, Genetic Algorithem optimization (GA) is used to get the best design by optimizing the optical featurs of the eye elements. The optimal eye design was tested using Zemax software, the test includes estimation of the image quality, and optimal performance for the proposed optical eye system.The second stage was implementing a specially developed software to simulate the behavior of the human eye. The simulator using visual basic 6 and works under Windows operating system, it is able to plot the eye design graphically, and can estimate the considered optical functions to determine the efficiency of the eye simulator.The simulator showed agood results for spot size, spot diagram and EFL, the present work has been gained some credibility when the considered optical functions achieved by the simulator are found compatible with those achieved by Zemax, since the comparison showed a behavioral matching between them, which ensure the correct path of the GA based eye design and the successful proposed eye design.

دراسة قدرة الايقاف والمدى للبروتونات == Study of Stopping Power and Range for Protons

اسم المؤلف: مصطفى عبد المحسن عبد العالي
اسم المشرف: محمد احمد صالح
الموضوع العام: علوم الفيزياء
السنة: 2009
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The calculation of the value of stopping power and the range for the proton is done by two ways : first, using Bethe - Bloch formula and second, using Bragg - Kleeman rule. The differences between the experimental and theoretical values of stopping power and range required studying the corrections for Bethe - Bloch formula which are represented by the maximum energy and density correction and then comparing the results with experimental values. Using these two formulas it has been found that the results computed by the Bethe - Bloch formula without corrections (maximum energy and density correction) are in agreement with experimental results for βγ ≤ 2 ( E ≤ 2×103MeV ) and for βγ ≤ 102 ( E ≤ 105MeV ) with corrections. The maximum energy and density corrections contributed to decrease the difference with the experimental results for βγ ≥ 102 ( E ≥ 105MeV ).The values of stopping power computed using the Bragg - Kleeman rule are in agreement with experimental results for E ≤ 200MeV and the range values computed using the Bragg - Kleeman rule are in agreement with the results computed using the Bethe - Bloch formula for E ≤ 400MeV .The results show that the energy losses for protons at the high energy values are low and vise versa; the energy losses for protons at the low energy values are high.The present calculations confirm that the proton looses its largest energy at the end of its path in matter

تاثير المعاملة الحرارية على بعض الخواص الميكانيكية للمتراكب المنيوم - كاربيد البورون == Effect of heat treatment on some mechanical properties of Aluminum - Boron carbide composites

اسم المؤلف: لمى جمال عباس الرماحي
اسم المشرف: قاصد عبد الستار صالح الجنابي | سعد رحمة الله
الموضوع العام: علوم الفيزياء
السنة: 2012
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Aluminum matrix composites reinforced with boron carbide are currently employed in the nuclear industry. It's used as a control rod in nuclear reactors; Since B4C has very high absorption cross section for thermal neutrons. The objective of this work is to study the effect of heat treatment on the mechanical properties of the Al - B4C metal matrix composites prepared by powder metallurgy techniques. Compressibility was measured with the Al powder. The chosen compaction pressure was 2500psi. Samples were prepared by adding 5%, 10%wt B4C to Al as well as the Al powder. Sinterability was evaluated at different temperatures (400,450,500,550,600,650°C) during 2, 4, 6, 8; 10 hr for soaking time.Mechanical test were evaluated, showed little improvement in hardness, compressive strength and young's modulus in temperatures 400,450,500,550°C, and significant improvement in hardness and compressive strength in temperatures 600and 650°C, and also improvement to the elastic modulus. Specific samples were irradiated by neutron source, and mechanical tests showed little decrease in their mechanical properties (hardness and compressive strength) due to low neutron fluence available that gives insignificant effec

اثر التلدين على الخواص البصرية لاغشية اوكسيد الالمنيوم (Al2O3) الرقيقة المحضرة بطريقة الترسيب الكيميائي الحراري == The effect of annealing on the optical properties of (Al2O3) thin films prepared by chemical spray pyrolysis

اسم المؤلف: عبير كمال جعفر
اسم المشرف: خضير عباس مشجل | ابتسام محي عبد العزيز
الموضوع العام: علوم الفيزياء
السنة: 2009
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The recent study deal with the structural and optical properties of Al2O3 thin films prepared by the chemical spray pyrolysis technique at glass substrate(450°C) and studying the effect of annealing at different temperatures (500,550,600) °C on the optical properties.The results of X - ray diffraction showed that the prepared films are polycrystalline, the study of optical properties included the record of transmittance spectrum of the films with the wavelengths range from (300 - 900)nm, and then measuring the forbidden energy gap of electronic transitions where it was found that the values of the forbidden energy gap of both allowed and forbidden transitions are (3.4)eV and (2.5)eV successively and it was (1.6)eV for the allowed indirect transition. When annealing the Al2O3 thin films, the values of the forbidden energy gap of the allowed and forbidden of direct transitions are (2.7)eV and (3.6)eV and it is (1.9)eV for the allowed indirect transition. Also, absorption coefficient , reflectance and optical constants such as extinction coefficient, refractive index, dielectric constants with it's two parts real and imaginary and optical conductivity as a function of photon energy have been studied, the study showed that the annealing caused an increase in energy gap values, reflectance, transmittance, refractive index and real part of dielectric constant, and a decrease in the values of absorptance, absorption coefficient, extinction coefficient, imaginary part of dielectric constant and the optical conductivity.

نموذج بطارية باستخدام برامجيات PSPICE مع مغير شحن ثنائي الاتجاه == Pspice Battery Model with Bidirectional Charging Converter

اسم المؤلف: زينة موفق قدوري حسين العزاوي
اسم المشرف: زينب منذر يونس كبة
الموضوع العام: علوم الفيزياء
السنة: 2008
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: This research intents to design Bidirectional Converter that can be used in wide applications from uninterrupted power supplies (UPS), photovoltaic (PV) and battery charging and discharging system, to auxiliary power supplies designed primarily with a general module depending on Orcad PSPICE program.Lead Acid battery model (12V) is putted, which is used in wide applications. The model consists of charge efficiency and battery voltage components. The charge efficiency factor can vary from (0 to 1) and is dependent on the Battery State of charge and charge current. The voltage component of the model consists of amp - hour integrator which tracks the net current flowing into the battery terminal (Battery voltage). The output of the integrator gives us the state of charge so, it is connected to a table driven voltage source, ETABLE, which generates the equivalent open circuit battery voltage. The method used here is implemented in orcad PSPICE program with bidirectional converter of properties (D=0.4, P=12W, Vo=12V, f=1 KHz, Io=1A).

دراسة لجودة الصورة للعين البشرية == A Study of the Image Quality for Human Eye

اسم المؤلف: ازهار عويد كاظم
اسم المشرف: صلاح عبد الحميد صالح
الموضوع العام: علوم الفيزياء
السنة: 2008
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The study of the effect of some factors on the human is difficult and complex because of the lack of instruments for measuring eye efficiency.The human eye is an optical organ, its work is similar to the camera work, but the eye can not return the image which it makes, but the camer a can return. Producing high quality image by human optical system like other lens system is affected by many parameters, some of them are internal such as aberrations and age, pigmentation. Also human eyes suffer from some defects that effect the human eye image quality, some of these defects are : 1. Hypermetropia (Long sightedness)2. Myopia (short sightedness) 3. Some other defects The optical characteristics of human eye imaging system are studied quantitatively via experimental and computer modeling. Experimental work is carried out to study the effect of spatial frequencies, color and ages on image eye quality. Computer simulations models are carried out to study the limitations imposed by imaging in the human eye. Theselimitations include the diameter of pupil eye, the aberrations (astigmatism and spherical), age, and pigmentation of eye. These limitations are computed in terms of modulation transfer function (MTF).The results showed that MTF curves are suitable for determining image quality and the limitions effect on imaging system. Also result showed a coincidence between laboratory work and theortical calculation of MTF for age, pigmentation, pupil size and aberrations

ميكانيكية الانتقال الالكترونية لثنائي شوتكي Al/c - Si/M == Electronic Transport mechanism of Al/c - Si/M Schottky Diodes

اسم المؤلف: رسل عبد السادة عزوزعبود
اسم المشرف: حسين خزعل رشيد | طالب سلوم حمادي
الموضوع العام: علوم الفيزياء
السنة: 2008
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هدا البحث تحضير معدن - شبه موصل باستخدام تقنية التبخير الحراري بالفراغ,حيث استخدمنا اغشيه رقيقه من الانديوم والفضه والذهب والالمنيوم .حيث تم معامله الثنائيات Al/c - Si/Inو Al/c - Si/Ag وAl/c - Si/Au حراريا بدرجات تلدين مختلفة( 303, 373، 473) كلفن. التوصيل الاومي لهذه الثنائيات كان من معدن الالمنيوم بسمك 0.2مايكرومتر اما معادن اتصال شوتكي فقد كانت بسمك(0.1, 0.2) مايكرومتر وضغط تبخير بحدود 10 - 5 ملي بار. تم في هذا البحث ايضا دراسة تاثير حرارة التلدين وتغيير دوال شغل المعادن على الخصائص التقويمية للثنائيات عن طريق دراسة خصائص تيار - جهد ومتسعة - جهد لتلك الثنائيات, وقد لوحظ بان هناك تحسن بالخصائص التقويمية للثنائيات (انخفاض في عامل المثالية وفي كثافة تيار الاشباع العكسي). واظهرت الدراسـة ان كثافة تيار الاشباع Js)) وحاجز الجهد (ΦB) وعامل المثالية (n) تم حسابها باستخدام خصائص تيار - جهد ذات المقياس اللوغارتمي لاحـداثـي التيار. بينت خواص تيار - فولتية للثنائيات Al/c - Si/Inو Al/c - Si/Ag وAl/c - Si/Au بان تيار الظلام الامامي يتغير اسيا تقريبا مع فولتية الانحياز وهذا يتفق مع نموذج اعادة الاتحاد - الانتفاق ولوحظ نقصان تيار الظلام بزيادة السمك. ومن خلال قياسات تيار - فولتية تحت ظروف الاضاءة وجدنا ان التيار الضوئي يزداد مع زيادة درجة حرارة التلدين ويقل مع زيادة السمك . درست خصائص السعة - الجهد للتراكيب الثنائية Al/c - Si/Inو Al/c - Si/Ag ما عدا Al/c - Si/Au بسمك 0.2 مايكرو متر وبدرجات تلدين مختلفة. حيث قيست سعة الانحياز العكسي كدالة لفولتية الانحياز وبتردد 1 ميكاهيرتز وقد دلت هذه النتائج على ان السعة تقل بزيادة جهد الانحياز العكسي، وبزيادة السمك ودرجات حرارة التلدين. قيم جهد البناء الداخلي(Vbi) ، حاجز الجهد (ΦBp) وتركيز الحاملات (Na) تم حسابها باستخـدام علاقـة شوتـكي - موت] C - 2 vs. V [. اظهرت قياسات التوصيليـة المستمرة وباستخـدام علاقة ارهينوس] lnσ = f(103/T) [ وجود طاقاتي تنشيط Ea1وEa2 والقيم المحسوبه تشير الى ان طاقات التنشيط تزداد بزيادة درجه حراره التلدين .اظهرت قياسات التوصيليـة المستمرة وباستخـدام علاقة ارهينوس] lnσ = f(103/T) [ وجود طاقاتي تنشيط Ea1وEa2 والقيم المحسوبه تشير الى ان طاقات التنشيط تزداد بزيادة درجه حراره التلدين . | Metal - semiconductor (M - S) junctions are prepared in this study by thermal evaporation technique, in which we used indium (In), silver (Ag) and gold (Au) films and aluminum (Al) films. The Al/c - Si/In, Al/c - Si/Ag and Al/c - Si/Au diodes heat treated at different annealing temperatures 303,373 and 473 K. The ohmic contact was aluminum with thickness of about 0.2 µm and the Schottky contacts were indium, silver and gold with thickness of (0.1, 0.2) µm under vacuum conditions of about 10 - 5 mbar. The effects of annealing temperatures and work functions have been studied by current - voltage and capacitance - voltage characteristics. The I - V characteristics showed that the rectification properties of all prepared diodes were improved with increasing the annealing temperature and the metal work functions (the ideality factor and the saturation current density decreased). The ideality factor (n), saturation current density (Js) and the barrier height (ΦB) were calculated using I - V plots with semilogarithmatic scale. The current - voltage characteristic of Al/c - Si/In, Al/c - Si/Ag and Al/c - Si/Au junctions showed that the current varies approximately exponentially with applied voltage and the junction was coinciding with recombination - tunneling model, the dark current decreases with increase of the thickness. Under illumination, the photocurrent increases and decreases with increase of annealing temperatures and thickness, respectively. The C - V characteristics of Al/c - Si/In and Al/c - Si/Ag diodes have been prepared at different thickness except Al/c - Si/Au at thickness equal to 0.2µm and annealing temperatures. The reverse bias capacitance was measured as a function of bias voltage at frequency 1 MHz; the capacitance decreases with increasing the reverse bias voltage, also with increasing of thickness and annealing temperatures. The built - in voltage (Vbi), barrier height (ΦB) and the carrier concentration (Na) were calculated using Mott - Schottky plot (C - 2 vs. V). The d.c. conductivity measurements using Arrhenius plot (lnσ=f(103/T)) showed that there are two activation energies Ea1,Ea2.The electrical activation energies increase with increasing annealing temperatures.

طريقة مطورة لتحديد السرعة النصف قطرية للطائرة ‏باستخدام ازاحة دوبلر == An improved method for the determination of ‎airplane radial velocity using Doppler shift

اسم المؤلف: جزيل حسين عزيز
اسم المشرف: لؤي ادور جورج | ليث عبد العزيز العاني
الموضوع العام: علوم الفيزياء
السنة: 2008
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا البحث تم تقطيع الملف الصوتي للطائرة المتحركة الى عدة مقاطع متساوية باستخدام النافذة المتشابكة, ثم بعدها تم تحويل كل مقطع من المجال الزمني الى المجال الترددي باستخدام تحويل فورير السريع0للحصول على الترددات المميزة تم استخدام النافذة المتحركة والتي يتناسب حجمها مع قيمة الترددات التي تم ملاحقتها, وهذه الالية تجعل من العمل يختلف عن العمل السابق الذي تم فيه استخدام نافذة ذات عرض ثابت في ملاحقة الترددات المميزة0 اذ تم اعتماد خوارزمية في انتقاء الترددات المميزة,وتعتمد هذه الخوارزمية على الترددات التي تخضع لقانون دوبلر بحيث ان ازاحة دوبلر تتناسب طرديا" مع قيمة الترددات المميزة, كذلك ان الترددات التي تم ملاحقتها هي الترددات الاكثر ظهورا" في طيف القدرة0لقد تم استخدام عدة احجام للنافذة المتشابكة من اجل دراسة تاثير تغير حجم النافذة على دقة ايجاد السرعة النصف قطرية للطائرة ومقارنتها مع النافذة غير المتشابكة0 تمت مفاضلة دقة النتائج من خلال عاملين هما : الاول، تقارب المنحنيات المرسومة للسرعة النصف قطرية كدالة للزمن للحالتين النافذة غير المتشابكة والمتشابكة، حيث كلما كانت المنحنيات متقاربة اكثر كانت النتائج افضل. والعامل الثاني، هو قيم مربع معدل نسبة الخطا لخطية العلاقة بين ازاحة دوبلر والترددات المميزة حيث انه كلما كانت قيم مربع معدل نسبة الخطا قليلة كلما كانت النتيجة افضل وهذا يعني ان الترددات المميزة الناتجة من الحسابات ستحقق معادلة دوبلر بشكل افضل0 كذلك تم استخدام ثلاث ازمان للمقطع الصوتي وهي (0.1ثا) و(0.15ثا) و(0.2ثا) ومن خلال النتائج التي ظهرت وجد ان الزمن (0.2ثا) لطول المقطع الصوتي يعطي نتائج افضل من بقية الازمان. بالاضافة الى ذلك تم اختبار عدة قيم لعرض النافذة وهي (0.01) و(0.03) و(0.05)، وقد وجد ان افضل قيمة لعرض النافذة هي (0.05). كما وجد ان نتائج استخدام النافذة المتشابكة افضل من استخدام النافذة غير المتشابكة0 | In this research the sound file recorded for a moving airplane has been sliced into several frames using overlapped window. Then the array of each frame is transformed from the time domain into frequency domain using Fourier Transform (FT).To determine the characteristic frequency of the sound, a moving window technique was used, the size of that window is made proportional with the values of the tracked frequencies, the use of this adaptive window makes the difference with a previous research work conducted for the purpose, in that work a fixed - size window is used to track all characteristic frequencies.An algorithm was established to select the characteristic frequencies, this algorithm allocates the frequencies which satisfy the Doppler relation, beside that the tracked frequencies was chosen to be the most occurred frequencies in the power spectrum. Several sizes of the overlap windows have been tested to study the effect of window size on the accuracy of the determined radial velocity of the moving airplane. The obtained results have been compared with the corresponding results of non overlapped window.The accuracy of the results was assessed using two criterion, the first is the closeness of the curves of the determined radial velocities versus time for the case of overlapped and non - overlapped window; the closer curves indicate better results. The second used criteria is the Root Mean Square Error (RMSE), which is used to determine the linearity of the relationship between Doppler shift and characteristic frequencies, the least values of (RMSE) signify better results are obtained. Three values of the frame size have been tested; they are 0.1s, 0.15s and 0.2s. From the attained results it was found that the frame size 0.2s gives better results than the other tested sizes. In addition several values of window size have been tested; they are 0.01s, 0.03s and 0.05s, the best value is found 0.05s. Also the results indicated that the use of overlap window gives better results than the case of using non - overlap window.

حسابات الامثلية لمنظومة مغاطيسية تتالف من حارف وعدسة == A Computational Optimization of Magnetic System Consists of Deflector and Lens

اسم المؤلف: احمد حسين علي
اسم المشرف: احمد كمال احمد | عدي علي حسين
الموضوع العام: علوم الفيزياء
السنة: 2008
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: A computation investigation on the design of magnetic deflection and focusing system using the synthesis approach of optimization method has been done. By solving the paraxial ray equation using the Range - Kutta - Nystrom method the trajectories of the electron beam and the optical properties of the magnetic deflection and focusing system under infinite and zero magnification conditions has been computed.The synthesis approach of optimization method is used in the present work to finding the optimum design of magnetic deflection and focusing system which give rise to the minimum spherical, chromatic, spiral distortion, and radial distortion aberration.The toroidal deflection coil is used as the source of magnetic field, and then the field distribution is determined by using an exponential function. The moving objective lens concept is included in the computation of system field

تطبيقات الانموذج العنقودي المزدوج في الانوية الخفيفة == APPLICATIONS OF COUPLED CLUSTER MODEL IN LIGHT NUCLEI

اسم المؤلف: علياء حسين السباهي
اسم المشرف: ليث عبد العزيز العاني | سعد ناجي عبود
الموضوع العام: علوم الفيزياء
السنة: 2007
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: احد الاكتشافات التي حدثت مؤخرا في الفيزياء النووية هي وجودالانوية السحرية(Halo nuclei). الانوية السحرية هي انوية ضعيفة الترابط حيث قلب النواة مع كثافة نووية طبيعية محاطان بمنطقة من مادة نووية مخففة كما في (كالنيوترون السحري). مثل هذه النوى تتواجد بكثافات خفيفة اوثقيلة, ان هذه الانوية موضوع بحث عدد كبير من الدراسات النظرية وكذلك العملية لغرض فهمها بطريقة اكثر وضوحا. ولهذا لوحظ خلال السنوات العشر السابقة اتسعت دراسة هذه الانوية. وفي هذه الدراسة تم فحص عدد من الانوية السحرية ومعالجتها بعدة طرق وايجاد بعض الخصائص الفيزيائية لهذه الانوية. في هذه الاطروحة تم فحص تركيب النوى السحرية الخفيفة من خلال الانموذج المجهري المتغير, هذا الانموذج هو عبارة عن توسيع لعمل سابق عن القشر المغلقة. تم استخدام الانموذج العنقودي المزدوج في هذه الاطروحة بالاعتماد على جسيمة الفا كاساس في الانموذج العنقودي وكذلك النيوترونات التي تظهر من خلال هذا الانموذج. كما تم معالجة الدالة الموجية بطرق التغاير وطريقة جاسترو للوصول الى دالة موجية اختبارية مقاربة الى الدالة الموجية الحقيقية.الدالة الموجية نحصل عليها من حالة االمصدر والتي تتضمن المتناظرات المطلوبة وتقدم وصف انتقالي (ثابت) للنظام يشكل عناقيد متعددة وغير مترابطة بعد ذلك نستخدم المؤثرات المترابطة ( بنوعيها المدى المتوسط الى الطويل الخطي والمدى القصير اللاخطي ) للحصول على دالة موجية جديدة, كم ان الدالة الموجية في الانموذج العنقودي تسمح بوصف الحركة الاهتزازية بين التجمعات داخل النواة. ان اهمية هذه الطرق تكمن في ايجاد حل لمعادلة شرودنكر كما تم الاعتماد على تفاعل نوية - نوية شبه الواقعية للوصول الى الجهد المطلوب, وان هذا البحث يتطابق مع مبدا باولي للاستبعاد. كما تم استخدام طريقة مونتي كارلو في هذا البحث وذلك لانها تمتاز بدقة رقمية عالية.وتولي اهتمام عالي لمتطلبات الانموذج الدقيقة. "والافضل استعمال المترابطات بحالة عشوائية كما يجب الاخذ بنظر الاعتبار تقدير الاخطاء بصورة اكثر دقة"في هذه الاطروحة تم استخدام الانموذج لفحص الانوية التالية : (5He,6He,8Be,9Be) وايجاد بعض الخصائص الفيزيائية لها من خلال ايجاد توزيع الكثافة لجسيم واحد ولجسيمين. بعدها نحصل على صورة نوعية لتوزيع المادة في النواة التي نحصل عليها وتجهيز تحليل معين لحالة مقيدة واحدة تتطلب قوة المدار - البرم في خطة مزدوج ( S - L ) ستظهر لنا انموذج قادر على انتاج حالات مقيدة يقترح لانظمة القشر المفتوحة بشكل اصطناعي لتعديل االتعبير المركزي للتفاعلات شبه الواقعية المستخدمة. كما تم ايجاد علاقة الطاقة مع عرض القشرة, وكذلك ايجاد سلوك النواة من خلال ايجاد العلاقة بين الطاقة والمسافة الى مركز كتلة جسيمة الفا. (5He ,8Be) هي انوية سحرية , نلاحظ السلوك العام للطاقة تقترب للحد الادنى وهذه يمكن ملاحظتها من المعدل الكروي لتوزيع الكثافة لجسيم وجسيمين,اما الانوية الخفيفة (6He,9Be) هي انظمة للقشر المفتوحة . في هذه الاطروحة تم كتابة البرامج باستخدا لغة الفورتران (77). | One of the recent discoveres in nuclear Physics is the existance of Halo nuclei . Therefore, halo nuclei are very weakly - bound exotic states of nuclear matter in which the outer one or two valence nucleons (usually neutrons), and a nuclear core with normal nuclear density is surrounded by a region of dulite nuclear matter, referred to as the neutron halo. Such nuclei occur from light to heavy masses and have been the subject of a alarge number of theoretical studies to try and understand them. A number of theoretical models have been proposed over the years. In this thesis the structure of light halo nuclei is examind through a fully microscopic variational model, where the Pauli exclusion princple explicity satisfied and semi - realistic nucleon - nucleon interactions are used. The model is an extension of previous work of closed shell nuclei. The wavefunction is obtained from a starting or reference state, which includes the required symmetries nd provides a translationally invariant description of the system in terms off several uncorrelated clusters. Medium to long - rang linear and short - range non - linear corrlation operators are then applied to obtained a good wavefunction, these models are important to solve the Shrodenger equation. The model developed is then used to examine the nuclei , , and . By making use of one - and two - body density distributions a qualitative picure of the matter distribution in the nucleus is obtained. The analysis provided indicates for a bound state one requires spin - orbit force, something that we don’t include. Nevertheless working in the L - S coupling scheme have shown that our model is capable of producing bound states for open - shell sysytems by artificially altering the central term of the semi - realistic interactions in use. And to find the relashonshipe between the energy and the width of shell, and find the behavioer of nuclei from throught the relation between energy and distance to the center of mass of alpha partical, 5He and 8Be are known halo nuclei. The general behaviour obtained was that the energy approached a minimum, as the separation between the several constituents increased. This could be monitored by observing the spherically averaged one - and two - body density distributions. We could clearly see that the energy was minimized as the one - body distribution broadened with the center shifting a way from the origin. The two - body density distribution separated into two parts : a main body similar to the alpha - particle and a small tale effect. We used algorithmic scaling in order to distinguish the two parts. Despite the fact our interaction is not adequate for the light halo nuclei of 6He and 9Be we demonstrated that our model can produce bound state for such open - shell systems by modifying the inter - nucleon force.in this thesis used programes in Fortran (77).

برنامج حسابي لحساب بعض خواص التراكيب البلورية == A Computational Program to Determine Some of Crystal Structure Specifications

اسم المؤلف: لينا حسين علي
الموضوع العام: علوم الفيزياء
السنة: 2008
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: البرنامج الحسابي crystal - 2 المصمم بلغة فيجول بيسك 6 صمم وطبق لتعريف خصائص ثلاثة انواع من البناء البلوري يتضمن قياس الابعاد البلورية(a, b, c) , الزوايا المحورية (α, β, γ) ,متوسط حجم الحبيبة (AGS) , نسبة الملئ (FF) والاجهاد المرن (ε) . هذا البرنامج سوف يعطينا وصف كامل عن البناء البلوري لثلاثة انواع من البناء البلوري للمواد المستخدمة بواسطة ادخال المعلومات من البيانات التي تتضمن زاوية الحيود (2θ) ومعاملات ميلر hkl للمواد المستخدمة مثل كبريتيد الكادميوم (CdS) والبريليوم (Be) ومقارنة القيم المحسوبة مع القيم النظرية للبيانات المدخلة للمواد المستخدمة.كما انه تم قياس (AGS) بواسطة استخدام نظرية شيرر وعامل المرونة بواسطة استخدام نظرية هول ويليامسون للمواد المستخدمة مثل كبريتيد الكادميوم . | Computational program &#34;Crystal - 2&#34; in Visual Basic 6.0 was designed and applied to identify the specification for three crystal structures includes the lattice parameters (a, b, c), the axial angles (α, β, γ), the Filling Factor(FF) foe CdS, the Average Grain Size (AGS) for CdS, and the Elastic Strain (ε) for CdS and CdTe. This program will give us a complete description on crystal structure for three crystal structures material by inserting a data which include the values of Miller indices (hkl), the diffracted angle (2θ) from ASTM data for cadmium sulfide, beryllium and compare the calculated values with the values of ASTM data used material. This program is includes many special calculations for a certain material such as cadmium sulfide that used to examine the cubic system and calculated lattice parameters were found to be a ≈ 5.82 Å, b ≈ 5.83 Å and c ≈ 5.81 Å and there is a drift error about D ≈ 4.365314 10 Å when is compared with the published values, and to examine orthorhombic system by using ASTM data for cadmium sulfide as example the calculated values were found to be a ≈4.169 Å, b ≈ 2.791 Å and c ≈ 5.413 Å, with a drift error about D ≈ 8.28014 10 Å, also the tetragonal system is also examined for beryllium and the calculated values were found to be a ≈ 1.36 Å, b ≈ 1.36 Å, and c ≈ 3.58 Å with a drift error D ≈ 5.743535 10 Å, and the average grain size is also calculated for CdS by using the Scherrer&#39;s formula ,the filling factor is determined for Cadmium Sulfide, and the elastic strain by using the Hall - Williamson method for CdS and CdTe

ترميم الصور باستخدام تقنيات محورة غير خطية == Image Restoration Using Adaptive Nonlinear Techniques

اسم المؤلف: محمد خضير كاظم
اسم المشرف: اياد عبد العزيز العاني | صلاح عبد الحميد صالح
الموضوع العام: علوم الفيزياء
السنة: 2008
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Image restoration is the process of finding an approximation to thedegradation process and find appropriate inverse process to estimate theoriginal image.An iterative restoration technique(Tikhonov method) was adapted.The adapted filter was designed for restoring RGB satellite images thatare blurred with space - invariant point spread function, Gaussianfunction, and corrupted with additive noise, and salt & pepper noise.Different degradation parameters, i.e. different signal to noise ratio wereconsidered and different noise density.The results using an adaptive filter were compared,quantitatively, with different types of conventional restoration techniques,(such as inverse filter, Least - Squares filter (Wiener Filter), andConstrained Least - Squares filter) using Mean Square Error (MSE).Results show that The Mean Square Error of the restored imagesdecreases with increasing the number of iteration until the resultconvergence. Also the ratio of the MSE of the degraded image to therestored image will increase with decreasing SNR for Gaussian noise,and with increasing noise density for salt and pepper noise respectively,then Results show this method has better performance for restoring thedegraded images, especially for low signal to noise ratio, and for highnoise density.

استخدام تحويل الجيب تمام لتشفير حزمة التحويل المويجي التقريبية == Using Discrete Cosine Transform to Encode Approximation Wavelet Subband

اسم المؤلف: سارة عدنان محمود
اسم المشرف: لؤي ادور جورج
الموضوع العام: علوم الفيزياء
السنة: 2008
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Various compression methods have been proposed to achieve high compression ratios and high image qualities in low computation time relatively. In this research work a combined transform coding scheme was proposed, the adopted system utilize both Discrete Cosine Transform and Wavelet transform. The advantages of both transforms were taken into consideration to encode the image. First, the system transform the color components of the image from (RGB) to (YUV), the U and V bands are downsampled due to their poor spatial resolution, and then the wavelet transform is applied on each color band separately. Some spatial coding steps are applied on detail coefficients (like hierarchal uniform quantization, Run Length Encoding (RLE), shift coding) to gain more compression. The approximate coefficients are coded by using (DCT), uniform quantization, shift coding.Also, some analysis tests were done to study the performance of the established system, and the effects of the involved coding parameters on the system were investigated. The test results indicated that the proposed scheme give high compression ratio and good fidelity measures (MSE and PSNR). Moreover, the proposed scheme was found need 0.7 second to compress color images of size (256x256) without making significant degradation in image quality.

محاكاة عامل التراكم لاشعة الكبح الناتجة من الامتصاص الكلي لاشعة بيتا == Simulation of Buildup Factor for Bremsstrahlung Produced by Complete Absorption of Beta Rays

اسم المؤلف: ميلاد جذلان علي الانصاري
الموضوع العام: علوم الفيزياء
السنة: 2006
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم تطبيق المحاكاة بطريقة مونتي كارلو لدراسة عامل التراكم لاشعة الكبح المتولدة من الامتصاص الكلي لجسيمات بيتا، حيث لم يسبق دراسته من قبل رغم اهميتها الكبيرة في الدراسات المتعلقة بحساب الجرعة الاشعاعية. حسب عامل تراكم اشعة الكبح لاسماك مختلفة من الماء والكونكريت والالمنيوم والقصدير والرصاص لمصدر السترونتيوم/ اتريوم 90Sr/90Y لانتاج اشعة بيتا بطاقة عظمى مقدارها 2.2 مليون الكترون فولت، وقد تم ذلك من خلال تصميم وتنفيذ برنامج حاسوبي للمحاكاة اطلقنا عليه تسمية "BBF" لتمثيل حلول المسائل التقليدية (الكلاسيكية) لانعكاسات وعبور اشعة الكبح. حيث يتظمن البرنامج دوال لمتابعة حياة او مسيرة الفوتونات نظريا باعتبار نظرية الاحتمالات التي تصف السلوك الحقيقي للفوتونات. في هذا البحث تم دراسة عدد من المعاملات المتعلقة بتصميم البرنامج والمسماة بعوامل المحاكاة وكذلك دراسة المعاملات المتعلقة بمادة الدرع والمسماة بالعوامل الفيزيائية.تم حساب عامل تراكم اشعة الكبح لدرع مفرد ودلت نتائج المحاكاة على ما يلي : • يتزايد عامل التراكم لاشعة الكبح مع زيادة سمك الدرع.• عامل تراكم اشعة الكبح للدروع ذات العدد الذري الواطئ اقل منها في الدروع ذات العدد الذري العالي لنفس طاقة المصدر.• تم استنتاج علاقة شبه تجريبية لعامل تراكم اشعة الكبح كدالة لكل من العدد الذري Z والسمك X لمادة الدرع كالاتي : BBUF = 1 + (a1 Z + a2) X ( a3 Z + a4 ) حيث a4, a3, a2, a1 هي معاملات الملائمة وتعتمد على التوزيع الطاقي لاشعة الكبح. لمصدر كبح السترونتيوم / اتريوم فان قيم هذه المعاملات هي : a1 = 0.0007, a2 = 0.0022, a3 = 0.0072, a4 = 0.4204 | The Monte Carlo simulation method has been applied to generate the first data for bremsstrahlung buildup factor (BBUF) produced by the complete absorption of beta particles in different materials. The bremsstrahlung buildup factor was computed by the present method for different thicknesses of water, concrete, aluminum, tin and lead at the maximum bremsstrahlung energy of 2.2 MeV for 90Sr/90Y beta source. A computer program “BBF” was designed and improved to perform the calculations which solve the classical problem of a gamma ray reflection and transmission, the basic idea of this program is to create a series of life histories of the source particles using random sampling technique to sample the probability laws that describe the real particle’s behaviour, and to trace out the particle’s random walk’ through the medium. The effect of some considered parameters like the simulation parameters and physical parameters were studied. The bremsstrahlung buildup factor has been calculated for single layer shield. The simulation results indicate the following remarks : • The bremsstrahlung buildup factor increases with the increase of thickness of the shield. • The bremsstrahlung buildup factor for low atomic number material is lower than that for a high atomic number material at the same source energy.• The relation between the bremsstrahlung buildup factor BBUF with the atomic number Z and thickness X of the shielding material is suggested to follow the semi - empirical formula : BBUF = 1 + (a1 Z + a2) X (a3 Z + a4)where a1, a2, a3 and a4 are fitting parameters depends on the bremsstrahlung energy distribution. For 90Sr/90Y bremsstrahlung, these parameters are : a1 = 0.0007, a2 = 0.0022, a3 = 0.0072 and a4 = 0.4204

دراسة حاسوبية عن بعض خواص عدسة كابور == A Computational Investigation on Some Properties of a Gabor Lens

اسم المؤلف: علي اسماعيل محمد السماوي
الموضوع العام: علوم الفيزياء
السنة: 2006
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: لقد جرت دراسة حاسوبية لبعض خواص عدسة كابور وبمساعدة الحاسوب الشخصي في حالة عدم وجود تاثير لشحنة الفراغ. لقد تركز العمل على تصميم عدستين كهروسكونية ومغناطيسية متحدة المركز. العدسة الكهروسكونية هي عدسة ثنائية الاقطاب مغمورة واقطابها لها شكل اسطواني تفصلهما مسافة .s العدسة المغناطيسية هي عبارة عن ملف يمر به تيار يتكون من عدد من اللفات ذات مجال مستطيل وطول .L ان متغيرات العدسة الكهروسكونية هي النسبة بين الاقطاب والمسافة بينهما, بينما في العدسة المغناطيسية فكانت عدد اللفات - التيار وطول العدسة. العدسة المركبة من العدسة الكهروسكونية والعدسة المغناطيسية (عدسة كابور) تم دراستها عندما تعمل تحت ظروف التكبير الصفر والمالانهائي. تم حل معادلة المسار المحورية بمساعدة توزيع المجال الكهربائي والمغناطيسي المحوري وباستعمال طريقة رنج - كوتا. استعمل المجال المحوري ومشتقتيه الاولى والثانية لحساب الخواص البصرية للعدسة. ان معاملي الزيغ الكروي واللوني تم معايرتها بالنسبة الى البعد البؤري للعدسة ولظروف التكبير الصفري واللانهائي. | A computational investigation has been carried out in some properties of Gabor lens with the aid of personal computer under the absence of space - charge effects. This work has been concentrated on designing two concentric, electrostatic and magnetic lenses. Electrostatic lens is a two - electrode immersion lens whose electrodes are cylindrical in shape separated by a separation distance. Magnetic lens is a number of turns of the current - carrying coil of a hypothetical rectangular field of length L. The variable parameters of the electrostatic lens are the voltage ratio and the separation distance while in the magnetic lens the variable are the Ampere - turn and lens length. The combined electrostatic and magnetic lens (Gabor lens) has been investigated under zero and infinite magnification conditions. The paraxial ray equation has been solved with the aid of the axial electric and magnetic potential distribution using Runge - Kutta method. The axial potential and its first and second derivatives have been used for computing the optical properties of the lens under consideration. The lens spherical and chromatic aberration coefficients have been normalized in term of the focal length under zero and infinite magnification conditions.

تراكيز اليورانيوم في الدم البشري في بعض محافظات العراق باستخدام كاشف الاثر CR - 39 == DETERMINATION OF URANIUM CONCENTRATION IN HUMAN BLOOD SAMPLES IN SOME GOVERNORATES OF IRAQ BY USINGCR - 39 TRACE DETECTOR

اسم المؤلف: سجى فائز حسن عبد الرسول
اسم المشرف: ندى فاضل توفيق
الموضوع العام: علوم الفيزياء
السنة: 2006
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: هذه الدراسه تم قياس تركيز اليورانيوم وحساب الفعاليه الاشعاعيه النوعيه في الدم البشري(اللوكيميا والاصحاء) الماخوذه من مناطق مختراه لمحافظات القطر وقد استخدمت تقنيه عد اثار شظايا الانشطار النووي الناتج من انشطار نواه اليورانيوم - 235 المقصوفه بالنيوترونات الحراريه من المصدر النيوتروني Am - Be)) بفيض نيوتني 3n.cm - 1.s - 1)10 5 x) وم تحديد تراكيز اليورانيوم بالحسابات المعتمده بالمقارنه مع النماذج البيولوجيه القياسيه والتي تم تحضيرها. ان معدل اعلى تركيز لليورنيوم في الدم كان في محافظه البصره (1.654 ppm) اما اقل معدل تركيز لليورانيوم في الدم كان في محافظه بغداد (0.135 ppm). تم حساب الفعاليه الاشعاعيه النوعيه لنماذج الدم في تلك المناطق وقد بلغت اعلى معدل في محافظه البصره (1.43 x 10 - 1Bq/g) واقل معدل (0.1258 x 10 - 1 Bq/g) في محافظه بغداد وكما تم حساب تركيز اليورانيوم في الدم للمصابين بمرض اللوكيميا وقد كان اعلى تركيز (1.841 ppm) في محافظه المثنى واقل (0.364 ppm) تركيز في محافطه ديالى.اما بالنسبه للفعاليه الاشعاعيه النوعيه فقد كان اعلى قيمه ) 0 - 1 Bq/g 1(1.79 x في محافظه المثنى واقل تركيز) (0.34 x 10 - 1 Bq/g في محافظه ديالى. لقد قورنت نتائج تراكيز اليورانيوم مع الحد المسموح به والمنشور من قبل الوكاله الدوليه للوقايه من الاشعاع (ICRP) وكذلك تم مقارنه نتائج حسابات الفعاليه الاشعاعيه النوعيه لنماذج الدم مع الحد المسموح به والمنشوره من قبل الوكاله الدوليه للطاقه الذريه (IAEA | This study includes measurement of uranium concentration and calculates the specific activity in human blood samples (leukemia and health people) taken from some governorates of Iraq by using fission fragment track technique.The nuclear reaction used as source of uranium fission fragment is U - 235 (n, f), obtained by the bombardment of U - 235 with thermal neutrons from (Am - Be) source which has a flux of (5 x 103 n.cm - 2. s - 1 ) , the concentration values were calculated by comparison with standard biological samples which prepared.The highest rate of uranium concentration in human blood was (1.654 ppm) in Basrah governorate and the lowest rate of uranium concentration in human blood was (0.153 ppm) in Baghdad governorate. And also calculate the specific activity for human blood samples in those regions and found that the highest rate was (1.43 x 10 - 1 Bq/g) in Basrah governorate and the lowest rate was (0.1258 x 10 - 1 Bq/g) in Baghdad governorate.The highest of uranium concentration was (1.841 ppm) for leukemia sample in Al - Muthana governorate and the lowest uranium concentration was (0.364 ppm) in Diyala governorate, and the specific activity was calculated for leukemia samples and found that the highest activity was (1.79 x 10 - 1 Bq/g) in Al - Muthana governorate and the lowest activity was (0.34 x 10 - 1 Bq/g) in Diyala governorate.Uranium concentration results compared with permissible limit who purplish from ICRP agency and the specific activity calculations for human blood samples compared with permissible limit who published from IAEA agency.

تصميم حاسوبي لحزمة ايونية مركزة للمنظومة الليثوغرافية == Computer - Aided - Design Of Focused Ion Beam For a Lithography System

اسم المؤلف: فاضل عبد العباس علي السهلاني
الموضوع العام: علوم الفيزياء
السنة: 2006
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم بناء تصميم متكامل بمساعدة الحاســــــــوب وباســـتخدام الطرق الامثلـــــــية لمنظومة بصــــرية ايونيــة ، وذلك بدمــــج طريقة البرمجة الديناميكية مــــــع طريقة تقنية الذكاء الاصطناعى.فقد تم الحصول على معامــــــلات الزيوغ النســـــبية الكروية واللونية اســــــــتنادا الى معامـــل الهــــــيـئة للمنظومات البصرية المثلى ، وحســـــــــب الاتى : ا. تصميم عدســـة مفردة ( كهربائية ومغناطيســــية).ب‌. تصميم منظومة بصرية مكونة من عدســتين كهربائيتين.ت‌. تصميم منظومة بصرية مكونة من ثلاث عدسات كهربائيات.ث‌. تصميم منظومة بصرية مختلطة العدسات (كهربائية ومغناطيســــية).كذلك تم تصميم اربعة انواع من العدسات الكهروستاتيكية مع نموذج لعدســة مغناطيســــية لاصــغر زيوغ بصرية ( المرتبة البصرية الاولى والثالثة) ، حيث تم اعادة بناء الاقطاب الكهربائية والمغناطيسية ثم رسمها لبعدين وثلاث ابعاد ببرنامج المحاكاة (SIMION(7 ، وبالاعتماد على قاعدة البيانات المخزونة (قاعدة المعرفة).هذه العدسات هى كما ياتى : • عدســة احادية الجهد (1) فى نمط التباطىء .• عدســة احادية الجهد (2) فى نمط التعجيل .• عدســة مغمــــورة.• عدســة الحاجــــــز.• عدســة مغناطيســــــية (1). تـــــم تصميم وكتابـــة الحزمة البرمجية بلغة الجافا منظومة الخبير (JESS) والبيســــــــك المرئى النســـــخة السادســـة (VB 6) اســتوديو ، وذلك للتحليل والحصول على حسابات الامثلية الكاملة للمنظومة البصرية الايونية.حيث تم تســمية تلك الحزمة CADION .ايضا تم استخدام توزيع الجهد المحورى الامثل لكلا المجالين الكهروستاتيكى والمغناطيسى ، بالاعتماد على الشـــــروط المحددة لبناء وتركيب العمود البصرى المكون من عدســـتين وثلاث عدسات ومختلط العدسات. تـــم حساب حجم البقعة لقياسات النانومتر وتم الحصول على قيم تقترب الى (3.0) نانومتر المســـــــــتخدمة فى تطبيقات تقنية النانومتر. وكذلك تــم اقتراح تعاريف ومفردات لبصريات الجســـيمات المشــــحونة باعتبار بعض النتائج محققة لعلاقة شـــــــبيهة بمدا اللادقـــــة. | A complete computer aided design (CAD) by using optimization methods for the ion optical systems have been developed, by mixing the dynamic programming procedure and artificial intelligence technique. The relative spherical and chromatic aberrations coefficients were obtained according to figure of merit for the following optimized optical systems : a. Single - lens design (electrostatic and magnetic). b. Two - lens system consists of two electrostatic lenses. c. Three - lens system consists of three electrostatic lenses.d. Multi - lens system (electrostatic and magnetic).Four types of electrostatic lenses and a magnetic lens model were designed as small as possible of optical properties (i.e. the first and third optical properties), and reconstructions of electrodes and pole pieces were plotted in two and three dimensions graphics by using SIMION 7.0 simulator depending on the stored database (i.e. knowledge base).These lenses are as follows : • Unipotential lens 1 (operated in deceleration mode).• Unipotential lens 2 (operated in acceleration mode).• Immersion lens.• Diaphragm lens.• Magnetic lens. Present software has been designed and written in Java expert system shell (JESS) and Visual Basic 6 (VB6) for optimizing and analyzing full calculation processes, it has called CADION package. The optimized axial potential distributions for both electrostatic and magnetic fields according to the constraints have been used in the optical column setup, which are two - lens system, three - lens system and multi - lens system. Spot size measurements were calculated in nano scales, which have values closed to (3.0) nm applicable in nano technology applications used in lithographic systems. Also, the present work has been suggested definitions and abbreviations in charged particle optics to be consider some of the results, as a verification of the uncertainty principle relationship like

كشف اشعة كاما للنويدات المشعة في انسجة بشرية == GAMMA - RAYS DETECTION OF RADIONUCLIDES IN HUMAN TISSUES

اسم المؤلف: محمد سعد علي
الموضوع العام: علوم الفيزياء
السنة: 2006
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: وضعت هذه الدراسة لكشف وحساب الفعالية النوعية للنويدات المشعة في الانسجة البشرية المسرطنة التي تم استئصالها من مرضى مدينة بغداد باستخدام تقنية التحليل الطيفي لاشعة كاما بواسطة كاشف التالق ايوديد الصوديوم المطعم بالثاليوم (2×2 انج).استندت الدراسة الحالية على 26 عينة مصابة و8 عينات سليمة لمقارنة النتائج وقد شملت اربعة انواع من الانسجة الطرية (كلية, قولون, ثدي, رحم) والتي يمكن الحصول عليها بكتل كبيرة. اما عملية جمع العينات فقد تم الحصول عليها من قسم الهستوباثولوجي التابع للمختبرات التعليمية لمستشفى مدينة الطب ومستشفى الجراحات التخصصية.اخذت كل عينة بوزن 250 غم, غسلت بالماء المقطر لتخليصها من سائل الفورمالين (المادة الحافظة), قطعت ثم وضعت في وعاء مارنيلي بشكل منتظم, بعد ذلك فحصت بكاشف ايوديد الصوديوم المطعم بالثاليوم لفترة زمنية مقدارها 4 ساعات (14400 ثانية) وفولتية تشغيل مقدارها 530 فولت.قيست كفاءة الكاشف باستخدام مصدر (152 - uΕ) اما اطياف اشعة كاما لعينات النسيج فقد تم معايرتها وفقا لطيف كل من مصدر (137 - sC) و(60 - oC) و(22 - aN). تم رصد 6 نويدات مشعة في العينات المنتخبة حيث توزعت بين 2 - 5 نويدات في كل عينة وقد شملت : نويدتين (214 - Bi, 214 - bP) عائدتين الى سلسلة اليورانيوم؛ نويدتين (228 - Ac, 208 - lT) عائدتين الى سلسلة الثوريوم؛ نويدة صناعية واحدة (137 - sC)؛ والنويدة الطبيعة (40 - K).تراوحت الفعالية النوعية لليورانيوم الملاحظ (نواتج انحلال 238 - U) في العينات المصابة بين (1.02 - 7.46 بكرل/كغم) اما العينات السليمة فقد تراوحت بين (0.88 - 2.02 بكرل/كغم) وقد تراوحت الفعالية النوعية للثوريوم الملاحظ (نواتج انحلال 232 - Th) في العينات المصابة بين (0.59 - 4.84 بكرل/كغم) اما العينات السليمة فقد تراوحت بين (0.49 - 2.71 بكرل/كغم).رصدت نويدة (137 - sC) في جميع العينات المنتخبة بفعالية نوعية تراوحت بين (0.64 - 6.46 بكرل/كغم) في العينات المصابة اما العينات السليمة فقد تراوحت بين (0.5 - 3.46 بكرل/كغم), اما نويدة (40 - K) فقد ظهرت في جميع العينات المنتخبة ايضا لكن بفعالية نوعية اكبر مقارنة بالنويدات الاخرى حيث تراوحت بين (44.18 - 85.36 بكرل/كغم) في العينات المصابة اما العينات السليمة فقد تراوحت بين (40.62 - 56.95 بكرل/كغم). تشير النتائج الى ظهور نفس النويدات على الاغلب في كلا النماذج المصابة والسليمة لنفس النوع من النسيج لكن بفعالية نوعية اقل في النماذج السليمة. | This study is carried out to detect and measure the specific activities of radionuclides in cancerous samples of human tissues that excised from Baghdad city patients. The measurements were done using spectral analysis technique for gamma - ray with 2"×2" NaI(Tl) scintillation detector.Our present investigations are based on the study of 24 abnormal samples and 8 normal samples for comparing the results. These samples include four types of fresh tissues (kidney, colon, breast, and uterus) that may be obtained with great mass. These samples had been collected from the histopathology department for education laboratories in Madenat Al - Ttib and specialized surgical hospital. Each sample is taken with 250g in weight, washed with distilled water to remove the formalin liquid (conservator substance), cut, put in the Marenilli Beaker uniformly and then examined with NaI(Tl) detector for a period of 4 hours (14400s) and 530 V as an operating voltage.Detector efficiency was measured by using Eu - 152 source while gamma - ray spectra for tissues samples had been calibrated with respect to spectra of Cs - 137, Co - 60 and Na - 22 sources.Six radionuclides have been detected in the selected samples where distributed between (2 - 5) radionuclides in each sample. These radionuclides included : two radionuclides (Bi - 214 and Pb - 214) belonging to the uranium series; two radionuclides (Ac - 228 and Tl - 208) belonging to the thorium series; one artificial radionuclide (Cs - 137); and the natural radionuclide (K - 40).The specific activity of detected U - 238 (U - 238 decay products) ranged between (1.02 - 7.46 Bq/kg) in the abnormal samples and (0.88 - 2.01 Bq/kg) in the normal samples while the specific activity of detected Th - 232 (Th - 232 decay products) ranged between (0.59 - 4.84 Bq/kg) in the abnormal samples and (0.49 - 2.71 Bq/kg) in the normal samples.The artificial radionuclide (Cs - 137) is detected in all samples with specific activity ranged between (0.64 - 6.46 Bq/kg) in the abnormal samples and (0.5 - 3.46 Bq/kg) in the normal samples. The natural radionuclide (K - 40) is detected in all samples too, but with largest specific activity compared with other radionuclides where it ranged between (44.18 - 85.36 Bq/kg) in the abnormal samples and (40.62 - 56.95 Bq/kg) in the normal samples. The results indicate that same radionuclides are often appeared in both normal and abnormal samples for the same type of tissue but with least specific activities in the normal samples.
1 ... 39 40 41 42 43 ... 76