عرض: 25 50 75 100 النتائج

نتائج البحث: 50 من أصل 94,449

دراسة طيفية ونظرية لمشتقات النايترون Nitron Theorettiicall and Specttroscopiic Sttudiies off Niittron Deriivattiives

المستخلص: The main purpose of this thesis was to perform computational investigations on Nitron compound and its derivative( Nitro - Nitron) using Density Functional Theory (DFT) at an appropriate high level of theory and comparison with experimental data, in order to get better insight into the structures and energetic features of these compounds. The DFT calculations have been performed using Gaussian 09 program with GUI(Graphical User Interface) called Gaussview 5.08. The present study is separated in three parts, in part I, optimized geometrical parameters, vibrational frequencies, electronic maximum absorption wavelength in gas phase and solvent case (chloroform), and frontier orbitals (HOMO - LUMO), electrostatic potential surface (EPS), Mullikan and Natural atomic charge distributions of 1,4 - diphenyl - 3 - (phenylammonio) - 1H - 1,2,4 - triazolium(inner salt), (C20H16N4), commonly well - known as Nitron, were calculated by using DFT/B3LYP method with 6 - 311G(d,p) basis set. The Fourier Transform - Infrared (FT - IR) solid phase spectrum of the title compound was recorded in the spectral range (4000 - 400) cm - 1. The difference between the scaled wavenumbers and the observed values of most of the vibrational modes is nearly small. The UV - Vis spectrum was measured in the spectral range (200 - 800) nm in chloroform solution. The theoretical electronic (UV - Vis) spectrum calculated using the TD - DFT(C - PCM) method with chloroform solvent is more suitable than the gas phase to the experimental spectrum. The calculated HOMO and LUMO energies show that charge transfer occurs within the molecule.In part II of this thesis, the synthesis and characterization of a novel compound, (1,4 - Diphenyl - 3 - (p - nitrophenylamino) - 1,2,4 - triazolium hydroxide inner salt (Nitro - Nitron), (C20H15N5O2) were reported. The spectroscopic investigations of the novel compound were studied by 1H NMR, FT - IR, UV/Vis techniques. The 1H NMR spectra were recorded in DMSO solution. FT - IR spectrum in solid state was observed in the region 4000 - 400 cm - 1. The UV/Vis absorption spectrum of the compound which dissolved in chloroform was recorded in the range 200 - 800 nm. The structural data, fundamental vibrational modes, 1H NMR chemical shifts, frontier orbital energies(HOMO,LUMO), electrostatic potential surface (EPS), Mullikan and Natural atomic charge distributions, and band gap energy of the compound in the ground state were calculated using density functional theory(DFT) employing B3LYP/6 - 311G(d,p) basis set. The HOMO and LUMO analysis were used to elucidate information regarding charge transfer within the molecule. Based on the optimized geometry and by using time - dependent density functional theory (TD - DFT) methods in vacuum and solution(chloroform), the allowed excitation and oscillator strengths of electronic absorption spectrum were predicted. The solvation effects have been included by means of the conductor - like polarizable continuum model CPCM. chemical shifts were calculated using the Gauge - Independent Ato mic Orbital (GIOAO) method. In part III, The results of Hall effect and D.C electrical conductivity studies of the Nitron and its derivative (Nitro - Nitron) compounds are described in this part. The temperature dependence of semi - conductivity is also described. The values of carriers concentration, mobility, conductivity, resistivity, Hall coefficient, and thermal activation energy, are also presented.Finally, a comparison between the experimental data and the calculated results of three parts of this thesis appeared a good agreement
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: دكتوراه
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: زياد عدنان صالح فريال ولي عسكر
اسم المؤلف: صلاح محمد علي رضا

دراسة بعض الخواص الفيزيائية للايبوكسي المدعم بدقائق نانوية STUDY OF SOME PHYSICAL PROPERTIES OF EPOXY REINFORCE WITH NANO PARTICLES

المستخلص: تم استخدام مادة الايبوكسي (EP) مع نسب خلط حجمية مختلفة (1, 2, 3, 4, 5, 7, 10, 15 و20%) من الجسيمات الزركونيا ( 2(ZrO والمغنيسا ( MgO) النانوية ومن الجسيمات 2 ZrO وMgO المايكروية لتحضير متراكبات الايبوكسي النانوية ومتراكبات الايبوكسي المايكروية لفحص ودراسة بعض من خصائصها الميكانيكية (متانة الانحناءومعامل الانحناء ومتانة الكسر وقوة الصدمة والصلادة ) والخواص الكهربائية العزلية ( ثابت العزل الكهربائي وزاوية ظل الفقد والتوصيلية الكهربائية) والخواص الحرارية (التوصلية الحرارية ودرجة الانتقال الزجاجي)طريقة تحضير عينات الايبوكسي وعينات متراكبات الايبوكسي النانوية وعينات متراكبات الايبوكسي المايكروية تضمنت مراحل الخلط الميكانيكي ومجانس خلط الامواج فوق الصوتية واستخدام منظومة التفريغ. تم استخدام فحص الانحناء ذي النقاط الثلاث وفحص وقوة الصدمة وفحص الصلادة وفحص السعة الكهربائية العزلية وفحص الماسح التفاضلي السعوي الحراري وفحص مجهر المسح الالكتروني وفحص التوصيل الحراري لفحص عينات الايبوكسي ومتراكباتة النانوية والمايكروية وقد اظهرت النتائج التي تم الحصول عليها من فحص متانة الانحناء ذي النقاط الثلاث زيادة تدعيم الخصائص الميكانيكية لمتراكبات الايبوكسي الزركونيا النانوية ,ان نسبة 2% من الخلط تؤدي الى اعلى نسبة تدعيم لا متانة الانحناء بلغت 52% اما معامل الانحناء فتضاعف مرتين عند هذه النسبة وايضزاادة متانة الكسر لتصل الى 86% مقارنة مع نتائج عينة الايبوكسي واما قوة الصدمة فقد بلغت 51% وارتفعت صلادة المادة 5% نسبة التدعيم 2% . وقد ظهر الكسر اللدن بشكل واضح في بعض منحنيات الاجهاد - الانفعال في متراكبات الايبوكسي زركونيا.كما اظهرت الخصائص الميكانيكية لمتراكبات الايبوكسي مغنيسيا النانوية زيادة تدعيمها بزيادة نسب الخلط الحجمية لجسيمات المغنيسيا النانوي في التراكيز القليلة (< 5%) حيث اظهرت النسبة 4% من MgO اانانوية اعلى قيمة لقوة الانحناء حيث ازدادة بنسبة 47% مقارنة EP) ) في حين معامل الانحناء ارتفع بنسبة 74% مقارنة EP) ) في حين متانة الكسر لمتراكبات الايبوكسي مغنيسيا النانوية فتضاعفت بحدود اربع مرات عن الايبوكسي وقد بلغت قوة الصدمة 65% عند نسبة التدعيم وارتفعت صلادة المادة 3% مقارنة EP) ) لوحده. وقد ظهر الكسر اللدن بشكل واضح في منحنيات الاجهاد - الانفعال في متراكبات الايبوكسي مغنيسيا..الخصائص الميكانيكية لمتراكبات الايبوكسي زركونيا المايكروية ومتراكبات الايبوكسي مغنيسيا المايكروية اظهر انخفاض في خصائصها الميكانيكية بارتفاع نسب الخلط الحجمي للجسيمات المايكروية للزركونيا وللمغنيسيا ما عدا معامل الثني فقد زاد بارتفاع نسب الخلط الحجمي لجسيمات الزركونيا والمغنيسيا المايكروي.وهذا يظهر تفوق الجسيمات النانوية عن الاخرى المايكروية حيث اضافتها بنسب ضئيلة تؤدي الى تحسين ملحوظ في الصفات الميكانكية والتي يتم تفسيرها عن طريق الصور الماخوذة عن مجهر الماسح الالكتروني والتي اظهرت البنية التركيبة لسطح الكسر لمتراكبات الايبوكسي زركونيا النانوية ولمتراكبات الايبوكسي مغنيسيا النانوية بوجود شقوق نانوية عند نسب خلط حجمية معينة ,وقد بينت صور الكسر انتهاء اغلب الشقوق من التركيب بسب وجود الاضافات لجسيمات الزركونيا والمغنيسيا النانوية فكانت اقل ما يمكن في نسب2 % من نسب الخلط الحجمي لجسيمات الزركونيا النانوي وعند 4% من نسب خلط حجمي لجسيمات المغنيسيا النانوي. وهذا معزز من النتائج العملية التي حصلنا عليها عند هذه النسب الضئيلة الاضافة واثرها في تحسين الصفات الميكانيكية للايبوكسي.ان الخصائص الكهربائية العزلية لمتراكبات الايبوكسي زركونيا النانوية ولمتراكبات الايبوكسي مغنيسيا النانوية اظهرت زيادة تدعيم ثابت العزل الكهربائي عند نسب الخلط الحجمية الواطئة لجسيمات الزركونيا والمغنيسيا النانوية في حين في نسب الخلط العالية (> 10%) بداء ثابت العزل الكهربائي لمتراكب الايبوكسي مغنيسيا الناوني بالارتفاع عن اعلى نسبة تحسن في حين ثابت العزل الكهربائي لمتراكب الايبوكسي زركونيا بالانخفاض. في حين ان زاوية ظل الفقد لمتراكب الايبوكسي زركونيا النانوي تزداد زيادة طفيفة بزيادة نسب الخلط الحجمي لجسيمات الزركونيا النانوي في حين زاوية ظل الفقد لمتراكب الايبوكسي مغنيسيا النانوي تقل بنسب قليلة بزيادة نسب الخلط الحجمي لجسيمات المغنيسيا النانوي.التوصيل الحراري لمتراكبات الايبوكسي زركونيا النانوية ولمتراكبات الايبوكسي مغنيسيا النانوية لها نفس السلوك نسب خلط حجمية مختلفة (1, 2, 3, 4, 5, 7, 10, 15 و20%) ان التوصيل الحراري لكلا المتراكبتين (لمتراكب الايبوكسي زركونيا النانوي ولمتراكب الايبوكسي مغنيسيا النانوي) يزداد بزيادة نسب الخلط الحجمية لجسيمات زركونيا ومغنيسيا النانوية. تمتلك المتراكبات النانوية توصيل حراري اقل من المتراكبات المايكروية. اما المتراكبات النانوية فقد امتلك متركبت الزركونيا قيما اعلى للتوصيل الحراري مقارنة بمتراكبة المغنيسيا. | Epoxy with various mix ratio of concentration 1, 2, 3, 4, 5, 7, 10, 15 and 20% of ZrO2, MgO nanoparticles and ZrO2, MgO microparticles were used to prepare epoxy microcomposites and epoxy nanocomposites in order to study the several mechanical properties (flexural strength, flexural modulus , fracture toughness, impact strength and hardness) and electrical properties (dielectrical constant , dissipation factor and thermal conductivity) and thermal properties (thermal conductivity and Tg).The molding process was used to prepare epoxy and their nanocomposite and microcomposite samples using, ultrasonic homogenizer and shearing mixer. Three point bending examine, impact strength examine, hardness shore D examine, The LCR meter examine, Scanning Electron Microscope (SEM) examine and Differential Scanning Calorimeter (DSC) were used also.The results where obtained to form 3 - point bending examine illustrated that the mechanical properties of EP/ ZrO2 nanocomposites were increased with increasing concentration of ZrO2 nanoparticles. The ratio of about 2% vol. fraction lead to Maximum improvement in flexural strength was 52%. flexural modulus improvement was doubled at this ratio of vol. fraction, fracture toughness is improved about 86% at 2% vol. fraction, impact strength is improved about 51% at 2% vol. fraction , while hardness is improved about 5% at 2% vol. fraction comparing with results of epoxy sample. Ductile behavior appears in some stress - strain curves of obtained for EP/ ZrO2 nanocomposites. The mechanical properties of EP/ MgO nanocomposites were increased with increasing concentration of MgO nanoparticles at low volume fractions (˂ 5%) of MgO nanoparticles. Flexural strength improved 47% at 4% vol. fraction. Flexural modulus is improvement about 74% at 4% vol. fraction, fracture toughness is rise about four times at 4% vol. fraction. impact strength is improved about 65% at 4% vol. fraction, while hardness is improved about 3% at 4% vol. fraction . Ductile behavior almost appears in stress - strain curves of EP/ MgO nanocomposites. The mechanical properties for epoxy ZrO2/ MgO microcomposites reduce with increasing concentration of ZrO2/ MgO microparticles. this show nanoparticles overcome for others microparticles; thus addition quit small amounts .lead to particularly improvement in mechanical properties ,which can be explain through the pictures . Scanning Electron Microscope (SEM) pictures show the topography of fractured structure of EP/ ZrO2 nanocomposites and EP/ MgO nanocomposites with nanocracks of the epoxy structure at some of volume fractions of ZrO2/ MgO nanoparticles, while the topography of fractured structure show the nanocracks almost vanish from the structure because of adding ZrO2/ MgO nanoparticles was at minimum value at 2% vol. fraction of ZrO2 nanoparticles and 4% vol. fraction of MgO nanoparticles . this enhance by experimental results which we got it in the small raito addition .their influence to improve mechanical properties of epoxy. Dielectrical properties of EP/ ZrO2 nanocomposites and EP/ MgO nanocomposites show; Dielectric constant improved at low volume fraction of ZrO2/ MgO nanoparticles, while at higher concentration (> 10%) Dielectric constant of EP/ MgO nanocomposites stile increased and Dielectric constant begin to reduce in EP/ ZrO2 nanocomposites. Tan delta of EP/ ZrO2 nanocomposites little increase with increasing volume fraction ZrO2 nanoparticles, while Tan delta of EP/ MgO nanocomposites begin to reduce with increasing volume fraction of MgO nanoparticles.Thermal conductivity for EP/ ZrO2 nanocomposites and EP/ MgO nanocomposites have the same behavior with 1, 2, 3, 4, 5, 7, 10, and 15% vol. fraction. thermal conductivity of both EP/ ZrO2 nanocomposites and EP/ MgO nanocomposites increase with increasing the volume fraction. EP/ MgO nanocomposites and EP/ MgO nanocomposites have thermal conductivity lower than from EP/ MgO microcomposites and EP/ MgO microcomposites
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: دكتوراه
الموضوع الدقيق: الفيزياء
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: وداد حمدي جاسم
اسم المؤلف: صفاء عبد صالح

تحضير ودراسة مفرق هجين من مادة (CuInTe2) Preparation and Study Heterojunction From CuInTe2 Material

المستخلص: حضرت سبيكة CuInTe2(CIT) بطريقة التبخير الحراري في الفراغ بعد ها تم تحضير اغشية هذه المادة على قواعد من الزجاج بدرجات حرارة تلدين K((673,473 وسمك nm(900,600,300).تم فحص تركيب كل من سبيكة واغشية CIT المحضرة بظروف مختلفة بواسطة تقانة حيود الاشعة السينية .XRD وقد اظهرت نتائج حيود الاشعة السينية ان السبيكة وجميع الاغشية الملدنة عند درجة حرارة تلدين K(673 and 473) كانت تمتلك تركيبا متعدد التبلور من النظام الرباعي (Tetragonal) بالاتجاه البلوري السائد (112)، في حين كانت الاغشية المحضرة في درجة حرارة الغرفة (300)K ذات تركيب عشوائي. اما دراسة خصائص سطح اغشية CIT بواسطة مجهر القوة الذرية AFM فقد بينت زيادة الحجم الحبيبي مع زيادة كل من درجة حرارة التلدين والسمك.واظهرت القياسات البصرية لاغشية CIT انها تمتلك فجوة طاقة مباشرة، اذ تزداد فجوة الطاقة بزيادة درجة حرارة التلدين لجميع الاغشية المحضرة، وكذلك تم حساب النفاذية والثوابت البصرية مثل معامل الانكسار ومعامل الخمود وثابت العزل بجزئيه حقيقي والخيالي ضمن مدى الاطوال الموجيةnm (600 - 2700) .واظهرت نتائج الخصائص الكهربائية للاغشية المحضرة على قواعد الزجاج ان التوصيلية الكهربائية المستمرة D.C كانت تمتلك حاملات شحنة من النوع الموجب، وانها تزداد مع زيادة درجة حرارة التلدين لجميع الاغشية المحضرة في حين كانت تقل مع زيادة السمك .وان لهذه الاغشية طاقتي تنشيط، اي انها تملك اليتين للانتقال الالكتروني.كما بينت ايضا نتائج تاثير هول ان الاغشية كانت تمتلك حاملات شحنة من النوع (p - type).في هذا البحث ايضا تم تصنيع خلايا شمسية من ترسيب اغشية CITعلى قواعد سليكونية مكونة من المفارق الهجينةSi/CIT) ) الملدنة بدرجات حرارة وسمـــك مختلفة، واخرى على قواعد مكونة من زجاجFTO , ITO للمفارق الهجينة ITO/ CdS/ CIT)) و(FTO/CdS/CIT)، وكذلك ITO/ZnO/CdS/CIT)) و(FTO/ ZnO/CdS/CIT) المرسبة بطريقة التبخير الحراري . تم قياس سعة الانحياز العكسي كدالة لفولتية الانحياز عند التردد الافضل 10)KHz) وبينت هذه النتائج ان المفارق من النوع الحاد، كما قلت السعة بزيادة جهد الانحياز العكسي وهبوط جهد البناء الداخلي بزيادة درجة حرارة التلدين .واظهرت دراسة خواص (تيار - جهد) في حالة الاضاءة للمفارق الهجينة المحضرة بان افضل مفرق لتصنيع خلية شمسية على القواعد السليكونية كان للمفرق المحضر بسمك 600)nm (بدرجة حرارة تلدين (673)K. اذ بلغت الكفاءة التحويلية (%1.8) وعند طلاء هذه الخلية بطبقة مضادة للانعكاس من مادة TiO2 بسمك 600)nm) ازدادت الكفاءة لتصل الى (2.4%). | CuInTe2 (CIT) alloy prepared by thermal evaporation technique then prepared thin film from this alloy on glass substrate of different thickness (300,600 and 900 ±20)nm and at different annealing temperature (473 and 673)K.The structure of the alloy and CIT films which prepared at different deposition condition are examined using x - ray diffraction (XRD) technique.XRD analysis show that the alloy and the films prepared at (473 and 673)K have polycrystalline structure of tetragonal type with preferred orientation[112],while films prepared at R.T(300)K show amorphous structure. CIT films morphology were studied using AFM techniques, the results show that increase in grain size with increase thickness and annealing temperature .The optical measurement show that CIT films have a direct energy gap and it increase the increasing annealing temperature ,the transmittance and optical constant such as refractive index ,extinction coefficient and the dielectric constant with both part real and imaginary within the wavelengths in the range (600 - 2700)nm were calculated too.Electrical properties results for films prepared on glass substrate as a function of thickness and annealing temperature show that the electrical conductivity D.C were p - type and it with increasing annealing temperature while it decrease with increasing thickness, all films have two activation energies with two mechanisms of transport of free carriers .Hall effect results show that all films were p - type.In this research, fabrication solar cells from deposition CIT films with different thickness and different annealing temperature on silicon substrate (Si/CIT) heterojunction and another deposition on FTO,ITO substrate to fabricated solar cell from (ITO/CdS/CIT) ,) FTO/CdS/CIT) heterojunction and (ITO/ZnO/CdS/CIT) , (FTO/ZnO/CdS/CIT) heterojunction by using thermal evaporation technique.The C - V measurements as a function of reverse bias voltage at frequency (10KHz) show that the heterojunctions are abrupt type, the capacitance decrease as reverse bias voltage increase and the value of built - in potential decrease with increasing annealing temperature. The current - voltage characterization study for heterojunction prepared under illumination shows that the solar cell which have optimum condition deposition on silicon substrate with the thickness 600nm at annealing temperature 673K, have best efficiency (1.8%) among other cells, and after coating this cell by antireflection coating (TiO2) with thickness (600)nm, the value of efficiency increase to(2.4%)
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: العربية
الدرجة: دكتوراه
الموضوع الدقيق: الفيزياء
السنة: 2017
الموضوع العام: علوم الفيزياء
اسم المشرف: بشرى كاظم حسون الميالي فلاح ابراهيم مصطفى العطار
اسم المؤلف: شيماء قاسم عبد الحسن

خصائص التفريغ الكهربائي لمنظومة بلازما المايكنترون (PM) للتيارات المستمرة ذات الاقطاب المستوية Electrical discharge characterizations of dc - planar magnetron (PM) Plasma device

المستخلص: في هذا العمل, تم تصميم وتصنيع الماكنترون ذو الاقطاب المستوية لمنظومة الترذيذ بالبلارما وقد تم توليد المجال المغناطيسي للماكنترون بطريقتين , الاولى باستخدام ملف كهرومغناطيسي.والطريقة الثانية لتوليد المجال المغناطيسي هي باستخدام زوج من المغانط الدائمة .درست مميزات التيار - الفولتية لمسافات مختلفة بين الاقطاب ,ضغط الغاز, وتغير نسب خلط غاز الاركون الى غاز الاوكسجين وشدة مجال مغناطيسي مختلف .وقد بينت النتائج ان التفريغ ضمن منطقة التفريغ التوهجي غير الطبيعي. وان افضل مسافة بين الاقطاب هي 4.5 cm.وقد وجد ان تيار التفريغ يقل بزيادة نسبة غز الاوكسجين ويزداد بزيادة شدة المجال المغناطيسي.وقد تم الحصول على منحني باشن لمسافات بين الاقطاب مختلفة,ونسب خلط لغازي الاركون - الاوكسجين مختلفة , وشدة مجال مغناطيسي ومادة قطب مختلفة .كما تم دراسة تاثير المجال المغناطيسي على كفاءة التاين.تمت دراسة تاثير المجال المغناطيسي على معلمات البلازما باستخدام مجس لانكماير المفرد. وقد وجد ان درجة حرارة الالكترون(Te) تقل بزيادة ضغط الغاز والمجال المغناطيسي, كما لوحظ وجود درجتي حرارة للالكترون عند تسليط مجال مغناطيسي تبعا لمنشاها. بينما وجد ان كثافة الالكترونات تزداد بزيادة كلا من ضغط الغاز والمجال المغناطيسي.حضرت اكاسيد النحاس والالمنيوم والنيكل باستخدام منظومة ترذيذ البلازما بالماكنترون ذو الاقطاب المستوية للتيارات المستمرة على قواعد زجاجية بنفس الظروف (الفولتية المسلطة 1200 فولت,المسافة 4.5 cm , الضغوط تغيرت ما بين mbar (0.05 - 0.14) نسبة(9/1)Ar/O2 وB = 200Gauss).من القياسات البصرية وجدت ان اغشية CuO اظهرت النفاذية في نطاق 78 - 86٪ في حين انها كانت بين 82 - 91٪ و86 - 90٪ لل Al2O3 وNiO على التوالي. فجوة الطاقة البصرية انخفضت بشكل طفيف مع زيادة ضغط العمل، فاغشية CuO لديها فجوات الطاقة المباشرة (Eg) (تقل 2.35 - 1.95eV) انخفضت فجوة الطاقة Al2O3 من 4.2 eV الى 3.8 ، والفجوة NiO 4.1 - 3.9 eV)) عند زيادة الضغط mbar (0.05 - 0.14).اظهرت نتائج تحليل حيود الاشعة السينية ان بنية الاغشية CuO هو متعددة البلورات ذات تركيب احادي الميل الاتجاه المفضل في (110) و(111). بينما يظهر Al2O3 طبيعة عشوائية. وحددت الاغشية NiO ان تكون الطابع متعدد التبلور مع بنية مكعب على طول (111) و(101) التوجه. وعلاوة على ذلك، تم العثور على Ni2O3 بواسطة حيود الاشعة السينية.وقد تم دراسة مورفولوجية سطح اغشيه CuO، Al2O3، وNiO باستخدام مجهر القوة الذرية (AFM)، ومجهر الماسح الالكتروني (SEM) واظهرت النتيجة ان كل الاغشية لها حجم نانوي ، ويزداد الحجم الحبيبي مع زيادة ضغط العمل .وقد تم قياس حساسية الافلام CuO، Al2O3، وNiO لغاز NO2 في الهواء المحيط في نظام الاستشعار الغاز. تم اختبار جميع العينات بنسبة 3٪ NO2 والجهد التحيز (6 فولت).اقصى حساسية لCuO هي (43%)مع وقت استجابة سريع (11.7s) ووقت الاسترداد (17.1s) ووجد ان افضل درجة حرارة عمل للمتحسس 170oC. وحساسية NiO في الضغط الامثل ( mbar0.08) 11.86% مع زمن الاستجابة (47.7s) ووقت الاسترداد (35.1s) في افضل درجة حرارة عمل للمتحسس 180 درجة مئوية. بينما لا استجابة Al2O3لغازNO2 .تم داسة خصائص اغشية اوكسيد النيكل الالكتروماتيكية ,حيث وجد من القياسات البصرية باستخدام اللوكس ميتر ,ان ضغط العمل الامثل كان 0.08 ملي بار حيث تمتلك الاغشية المحضرة نفاذية اعلى في حالة التبيض، ومعامل امتصاص اكبر عند عكس القطبية المسلطة ، مقارنة مع ضغوط العمل اخرى. | In this work, a DC planar magnetron of plasma sputtering device has been designed and constructed. The magnetic field of magnetron generated by using two ways, firstly, electromagnetic coil. Secondly the magnetic field generated by pair of permanent magnets. The current - voltage characteristics have been studied at different inter - electrodes spacing, gas pressure, argon - oxygen mixture, and magnetic field strength. The result shown that the discharge is operating in the abnormal glow region. The optimum inter - electrode spacing was 4.5cm, and the discharge current decreased by increasing O2 percentage and increased by increasing magnetic field strength. Paschen curves have been obtained at different inter - electrodes spacing, argon - oxygen mixture, magnetic field strength and cathode materials. Also the effect of magnetic field on the ionization efficiency has been studied. The effect of magnetic field on plasma parameters are investigated by using a single Langmuir probe. It is found that the electron temperature decreases with increased working pressure and magnetic field, also when the magnetic field applied the probe measured two electron temperatures (Te) according to their origin. While electron density increased with both increasing working gas pressure and magnetic field strength Copper oxide, aluminum oxide, and nickel oxide thin films are prepared using dc - planar magnetron plasma sputtering system on the glass substrate at the same conditions( applied voltage (1200 volt) distance 4.5 cm working pressure varied between (0.05 - 0.14)mbar (9/1) Ar/O2 ratio and B=200 Gauss. From optical measurements have found that, the CuO thin films have showed transmittance in 78 - 86% range whereas it was in between 82 - 91% and 86 - 90% for the Al2O3 and NiO thin films respectively. The optical energy gap decreased slightly with increase working pressure, since CuO films have the direct energy gaps (Eg) (2. 35eV decreases to 1.95eV), Al2O3 band gap decreased from 4.2 eV to 3.8 eV , and band gap of NiO (4.1 to 3.9 eV) at pressure increased from 0.05 to 0.14 mbar. X - Ray diffraction analysis have showed that the structure of CuO films is polycrystalline with monoclinic structure and preferential orientation in the (110), and(111) directions. While Al2O3 shows amorphous nature. The NiO films are identified to be polycrystalline nature with cubic structure along (111) and (101)orientation. Furthermore, Ni2O3 is found by XRD. The surface morphology of CuO, Al2O3, and NiO thin films have been studied by using Atomic Force Microscope (AFM) and Scanning Electron Microscope (SEM). The result is showed that all film had nano size structure, and the grain size increased with increased working pressure.The sensitivity of CuO, Al2O3, and NiO films to NO2 gas in air ambient has been measured in gas sensing system. All samples are tested at 3% NO2 and bias voltage (6 volt). The maximum sensitivity of CuO is (43%) with the fast response time (11.7s) and recovery time of (17.1s) at optimal operating temperature 443.15 kelvin. And the sensitivity of NiO at the optimum pressure (0.08 mbar) is found 11.86% with the response time (47.7s) and recovery time of (35.1s) at optimum operating temperature 180 oC, While Al2O3 not response towards NO2gas. Electrochromic (EC) properties of nickel oxide films have been studied, They were characterized by optical measurements by using lux meter ,the optimizing working pressure was 0.08 mbar, since the prepared films have a higher transmittance in the bleached state, and larger absorptance when the opposite polarity was applied, compared to another working pressures.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: دكتوراه
الموضوع الدقيق: فيزياء البلازما
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: ابراهيم رمضان عاكول محمد خماس خلف
اسم المؤلف: شيماء حسين عبد مسلم

التركيب المورفولوجي والخواص البصرية لاغشية In2O3 الرقيقة Morphology Structural and Optical Properties of In2O3 Thin Films

المستخلص: يتناول هذا البحث دراسة تاثير تغير زمن الاكسدة ودرجة حرارة التلدين على الخصائص التركيبية والبصرية لاغشية اوكسيد الانديوم الثلاثي (In2O3) الرقيقة التي تم تحضيرها بتقنية التبخير الحراري في الفراغ ، حيث تم ترسيب معدن الانديوم (In) على قواعد من الزجاج واخرى من السليكون بدرجة حرارة الغرفة (300 K) وبسمك (400 ± 10 nm) وبمعدل ترسيب 5.47 ± 0.5 nm/sec)) ، ومن ثم اكسدة اغشية (In) المحضرة حراريا بدرجة حرارة (673 K) وبوجود الهواء وبزمن مختلف (ساعة ، ساعة ونصف ، ساعتان) ، بعد ذلك تم اجراء التلدين بدرجات حرارة مختلفة K (323 , 373 , 423) على اغشية (In2O3) المؤكسدة بزمن ساعة واحدة باعتبار ان هذا الزمن هو افضل زمن اكسدة من ناحية قيم فجوة الطاقة البصرية والحجم الحبيبي والخشونة ومعدل الخشونة . درست الخصائص التركيبية للاغشية المحضرة (قبل التلدين وبعده) عن طريق تقنية حيود الاشعة السينية (XRD) التي اظهرت ان هذه الاغشية ذات تركيب بلوري متعدد ومن نوع مكعب ، وكذلك تم استخدام مجهر القوة الذرية (AFM) والمجهر الالكتروني الماسح (SEM) لدراسة طوبوغرافية السطح من ناحية التجانس والخشونة ومعدل الخشونة . درست الخصائص البصرية للاغشية المحضرة (قبل التلدين وبعده) باستخدام المطياف البصري (Optical Spectrometer) ، حيث تم حساب فجوة الطاقة البصرية والتي كانت ذات قيمة اقل عند زمن اكسدة ساعة وعند درجة تلدين (323 K) ، بالاضافة الى دراسة طيف كل من الامتصاصية والنفاذية والانعكاسية ، وايضا تم حساب الثوابت البصرية وهي : معامل الامتصاص ، معامل الانكسار ، معامل الخمود ، ثابت العزل بجزئيه الحقيقي والخيالي كدالة لطاقة الفوتون ، وقد بينت النتائج ان زيادة قيم هذه الثوابت متعلقة بزيادة زمن الاكسدة ودرجة حرارة التلدين. | This research examines the effect of changing time of oxidation and the degree of annealing temperature on the structural and optical properties of membranes dioxide triple indium (In2O3 thin) that was prepared technology thermal evaporation in a vacuum, where the deposition of metal indium (In) on the glass and silicon substrate at room temperature (300 K) and thickness (400 ± 10 nm) and the rate of deposition of (5.47 ± 0.5 nm / sec) , and then oxidation films (In) prepared thermally and the presence of air at a different (hour, hour and a half, two hours) , then annealing was performed at different temperatures (323, 373, 423) K films (In2O3) oxidizing a time of one hour, considering that this time is the best time of antioxidants in terms of optical energy gap and grain size and roughness values and the rate of roughness . Structural properties of prepared films have been studied (before and after annealing) by X - ray diffraction technique (XRD) which showed that these films with the structure of crystalline multi it cubic type, as well as the use of an atomic force microscope (AFM) and electron microscopy scanner (SEM) to study the topography of the surface in terms of homogeneity and roughness and the rate of roughness . Optical properties of prepared films have been studied (before and after annealing) using the optical spectrometer, where the optical energy gap , and which were less valuable when oxidation hour time account and at a temperature annealing (323 K) , in addition to the study of spectrum both absorbance and transmittance and reflectivity , and was also the optical constants account : the absorption coefficient, refractive index, extinction coefficient, dielectric constant real and imaginary as a function of photon energy, the results have been shown to increase the values of these constants related to increased oxidation time and the annealing temperature.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: العربية
الدرجة: ماجستير
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: علية عبد المحسن شهاب
اسم المؤلف: شيماء احمد كاظم

تحديد مديات الاجسام وابعادها الغاطسة في الماء باستخدام تقنيات معالجة الصورة الرقمية وتحديد موديل رياضي لمعامل انكسار السوائل الشفافة Under water objects range and dimensions using digital image processing technique and determine the depths as a function of camera viewing angle

المستخلص: انتشرت انظمة قياس ابعاد الاجسام الغاطسة في الماء التي تعتمد على استخدام الكاميرا الرقمية على نحو واسع في الاونة الاخيرة , وعلى وجه الخصوص في الانظمة الروبوتية , لقلة تكلفتها ,وسهولة تركيبها , وسرعتها , وكونها امنة ودقيقة بما يكفي مقارنة بانظمة القياس المعقدة الاخرى ، التي تستخدم الليزر او المتحسسات الكهرومغناطيسية . لذلك توجهنا في دراستنا الحالية الى استعمال كاميرراقمية في تحديد طول الجسم بالبكسل Lp وايجاد موديل رياضي لطول الجسم بالبكسل Lp كدالة لعمق الجسم الغاطس في الماء h . وبعد حساب معامل التكبير m للاجسام الغاطسة في الماء ، تم الحصول في هذه الدراسة على موديل رياضي يربط بين معامل التكبير m وعمق الاجسام الغاطسة في الماء h وزاوية التصوير في الكاميرا θ , ومن خلاله تم حساب عمق الجسم , واظهرت النتائج تطابقا عاليا بين القيم الفعلية والقيم المستنتجة من الموديل الرياضي . اما في الحالة الثانية فقد تم ايجاد ابعاد الاجسام الغاطسة في الماء , حيث تم استحداث موديل رياضي يربط بين عامل التدرج Scf وعمق الجسم الغاطس في الماء h وزاوية التصوير للكاميرا θ ومن هذا الموديل الرياضي يمكن ايجاد اي واحد من المعاملات الثلاثة في حال كون اثنين منها معلومة , وقد تم اختبار الموديل لايجاد عمق الجسم الغاطس في الماء وكذلك ايجاد ابعاد الاجسام المجهولة الغاطسة في الماء والنتائج التي تم الحصول عليها كانت قريبة جدا من القيم الحقيقية. كما تم حساب معامل التكبير m وعامل التدرج Scf لايجاد علاقة رياضية تربط بين معامل التكبير وعامل التدرج وزاوية التصوير في الكاميرا لحساب معامل التكبير. وقد عني الجزء الاخير من هذه الدراسة بحساب معامل الانكسار البصري اذ تم اقتراح طريقة جديدة وسريعة وفعالة في تحديد معامل انكسار السوائل ضمن مدى الاطوال الموجية المرئية , اذ حددت العلاقة بين طول الجسم بالبكسل Lp مع العمق الظاهري للجسم الغاطس في السائل hi في حال معرفة معامل انكسار السائل (الماء) , ثم ايجاد علاقة رياضية يمكن اعتمادها كموديل رياضيا فعالا في تحديد معامل انكسار اي سائل شفاف اخر ، حيث تم تطبيق هذا الموديل لحساب معامل انكسار سائل اخر (البنزين) باعتماد المعادلة نفسها في حالة غمر الجسم نفسه فيه . وقد اظهرت النتائج دقه عالية في عملية حساب معامل الانكسار , واظهرت تطابقا بين القيمة الفعلية والقيمة التي تم حسابها في التقنية المقترحة وبنسب خطا ضئيلة جدا. | The measuring systems of dimensions of the immersed objects in water that base on the using of the digital camera are widely spread nowadays, especially in the robotic systems, because they are easy to install, fast, safe, inexpensive, and sufficiently accurate as compared with other complicated measuring systems that using the laser or electromagnetic sensors. Therefore, in the current study we intended to use a digital camera to determine the length of object in Pixels (Lp) and to find mathematical model of the length of the object in Pixels as a function to depth (h) of the immersed object in water. In this study, after calculating the magnification factor (m) of the immersed object in water, we have obtained a mathematical model relates the magnification factor (m) with the depth of the immersed object in water (h) and the angle of the taking picture (θ), then we have calculated the depth of the immersed object, the results showed a high matching between the actual values and the calculated values from this mathematical model. In the second phase of the study we have found the dimensions of the immersed objects in water by developing a mathematical model relates the scale factor (Scf) with the depth of the immersed object in water (h) and the angle of the taking picture (θ), from this mathematical model we can find any one of these parameters in case two of them are known. We have tested this mathematical model to find the depth of immersed object in water and to determine the dimensions of the unknown immersed objects in water. The results were very close to the actual values. Then we have calculated the magnification factor (m) and the scale factor (Scf) to find a mathematical relationship that relates the magnification factor with the scale factor and the angle of the taking picture to calculate the magnification factor. The last part of this study focuses on the calculation of the optical refractive index, where we have proposed a new, fast, and effective method to determine the refractive index of the liquids within the range of the visible wavelengths. We identified a relationship between the length of object in Pixels (Lp) and the apparent depth of the immersed objects in the liquid such as (water) (hi) in case of value of refractive index was known. Then finding mathematical relationship can be adopted as an effective mathematical model to determine the refractive index of another transparent liquid. According to this equation, we have calculated the refractive index of benzene in case we have immersed the same object in it. The results showed high accuracy in the calculating the refractive index, and also showed a symmetry between the actual value and the calculated ones with a very low error rate in the proposed technique.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: العربية
الدرجة: ماجستير
الموضوع الدقيق: معالجة الصور
السنة: 2014
الموضوع العام: علوم الفيزياء
اسم المشرف: علي عبد داود الزكي
اسم المؤلف: سماهر وحيد هاشم

تصميم وتقييم طلاء المضاد للانعكاس غـير المسـتقطـب Design and Evaluation of Non - Polarizing Antireflection Coating

المستخلص: لقد تم اجراء دراسة نظرية ووضع نموذج رياضي يعتمد في بناءه على المصفوفة المميزة المعدلة لتصميم طلاء مضاد للانعكاس لايتاثر بالاستقطاب ودراسة تاثير زوايا السقوط المائل . حيث توصلنا الى بنى تصاميم مثلى لطلاءات مضادة للانعكاس غير مستقطبة ولزوايا سقوط مختلفة للطيف الكهرومغناطيسي باستخدام مواد متجانسة موحدة الخواص مهملة الامتصاص ضمن منطقتي الضوء المرئي (300 - 800)nm وتحت الحمراء المتوسطة (3000 - 5000)nm وباستخدام الزجاج والسليكون كمواد اساس على التوالي.وفقا لاجراءات تحقق الامثلية فان النتائج اشارت الى امكانية التغلب على الصعوبات التي تظهر نتيجة السقوط المائل للطيف والتي من ابرزها ظاهرة الفصل (Splitting) لموجة الضوء المنعكسة الى مستويين P, S (نتيجة لظاهرة الاستقطاب) وايضا الازاحة الجانبية لمنحنيي الانعكاسية RS,RP باتجاه الاطوال الموجية القصيرة واللاتناظر بين المنحـنيين .وقد اظهرت التصاميم مقدرة عالية في تقليل انعكاسية الزجاج (ضمن منطقة الطيف المرئي) والسليكون (ضمن منطقة تحت الحمراء المتوسطة ) وتحقيق ادنى انعكاسية عند طول موجة التصميم المقترحة ولمدى واسع من زوايا السقوط. كما اوضحت النتائج امكانية التوصل الى تصميم طلاء مضاد للانعكاس غير مستقطب واسع الحزمة عند زوايا سقوط عالية تصل الى 60o وبعدد طبقات قليلة في المنطقة المرئية, فضلا عن التوصل الى تصميم طلاء مضاد للانعكاسية غير مستقطب عند اطوال موجية مختلفة عند 80o في المنطقة الحمراء | In this current study a mathematical model was put on to design anti - reflection coatings at oblique incidence of light for visible region (300 - 800 )nm and mid infrared region (MWIR) (3000 - 5000)nm .successfully we achieved designs with optimal performance at high angles of incidence where the results refer to overcome significant problems of design at oblique incidence .the main problem that we were able to overcome, is the splitting of the incident light into two modes of wave S and P - polarization where the separation of reflection performance for both S - and P - polarized wave expands when incidence angle increases. We managed to obtain designs of non - polarized antireflection coatings those that have the same reflection for both S - and P - polarizations at specified angles. results refer to designs of non - polarized antireflection coatings without splitting at high incidence angles. We accomplished designs of non - polarized antireflection coatings that provide low reflection within the Intended range of wavelengths where we could to limit the effect of the high incidence angles that increase the reflectance of the chosen substrates.Also the problem of shifting of reflection performance toward shorter wavelengths due to the oblique incidence of light was resolved and designs of optimal performance of non - polarized antireflection coatings with low reflection at high incidence angles was achieved.It has been provided a promising coating materials system for use in design of non - polarizing antireflection coatings at different incidence angles for the concerned wavelengths regions
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: العربية
الدرجة: ماجستير
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: الاء نزار عبد الغفار
اسم المؤلف: سارة عامـر ســــلمان

دراسة تحليلية للحام بالليزر على الخواص الحرارية - الميكانيكية للبوليمرات باستخدام برنامج ANSYS Analysis Study of Laser Welding on Thermal - Mechanical Properties of Polymers Using ANSYS Program

المستخلص: الخلاصةان الهدف من هذه الدراسة, هو التنبؤ بسلوك المواد من حيث الخصائص التركيبية ,الحرارية والميكانيكية اثناء عملية اللحام في 3 - D. ان دراسة الخصائص التركيبية للمادة قد تم باعتبارها دالة لدرجة حرارة الانتقال الزجاجي T_g, ودرجة حرارة الانصهار T_m, وتغير الطور بينما يتم دراسة الخصائص الحرارية وفقا لتوزيع درجات الحرارة, والتدرج الحراري, والفيض الحراري, واخيرا يتم دراسة الخواص الميكانيكية بواسطة الاجهاد والمطاوعة.لقد تم تبني طريقة FEM لمحاكاة عملية اللحام لقطعتين متشابهتين ومختلفتين من مادة البولي بروبلين والبولي ستيرين في ثلاثة ابعاد. ان تحليل الخصائص الحرارية والميكانيكية لبوليمر البولي بروبلين والبولي ستيرين قد تم بدلالة كل من نموذج الحالة المستقرة والنموذج المتنقل باستخدام برنامج ((ANSYS 11. حيث ربط نموذج الحالة المستقرة (اعتبرت انها الحمل الابتدائي) مع نموذج الحالة المتنقلة بافتراض وجود الحمل الحراري والميكانيكي سوية بنفس الوقت على اعتبار ثبوت سرعة اللحام عند20ملي/ثانية ودرجة الحرارة عند 298م, وكذلك تم اختبار تاثير قدرة الليزر باستخدام ثلاثة قيم 50) (150,100 واط, كذلك درست تاثير نصف قطر بقعة الليزر على خصائص البوليمرات المستخدمة.بينت النتائج العددية قابلية لحام كل من المادتين البولي بروبلين والبولي ستيرين بهذه الطريقة, حيث لوحظ تناقص التشوهات الحرارية والميكانيكية الناجمة عن اللحام, كما يشير الشكل الهندسي هذه الاجهادات الى جودة اللحام. وبينت الدراسة ان كل من الفيض الحراري والانحدار الحراري يكون عند اعظم قيمها في اتجاه y - axis وهو اتجاه تسليط الليزر, وكانت درجة الحرارة العظمى في لحام كل من PP - PPو PP - PS هي ((351.4kو (425.9k) على التوالي. اما الاجهادات الميكانيكية فقد كانت واطئة في كل من PP - PPو PP - PS بحدود (0.181*〖10〗^9MPa ) و(0.166*〖10〗^9MPa) والمطاوعة (0.171) و(0.142) لكل من PP - PP وPP - PS على التوالي. واخيرا، لوحظ صغر مساحة المنطقة المتاثرة حراريا اذ كانت بحدود (9.2 〖mm〗^2) بالنسبة ل PP - PP، في حين اظهر عمق الاختراق تحسن مقارنة مع الاساليب المستخدمة، حيث كانت قيمته بحدود (2.5mm), اما في نموذج المتنقل فقد لوحظ تضاعف المساحة المتاثرة وعمق اختراق قريب من نتائج النموذج المستقر. | The aims of this study is to estimate the material behavior properties in terms of its structure, thermal and mechanical properties during welding process in 3 - D. The structure is studied as a function of T_m , T_g and phase change. While the thermal is investigated according to thermal distribution, thermal gradient and thermal flux. Finally the mechanical is examined by stress and strain.Finite element method is adopted to simulate welding process of two similar and dissimilar pieces of polypropylene and polystyrene in 3 - D.The analytical of thermal and mechanical properties is done in terms of steady - state model and transient model using ANSYS 11 program, then coupling the steady - state with transient model by supposed existing thermal and mechanical loads together in same time. Laser power effect on welding is investigated by three powers (50,100,and 150watt) and by laser spot radius (1mm, and 2mm), the welding speed is supposed constant at (20mm/sec).Numerical results show that the ability of this method to joined polymers material PP and PS, where it is noticed that the thermal and mechanical deformations are reduced, also the geometry shape of welding zone is indicated to a good quality of welding.From this study, the thermal gradient and thermal flux are at their maximum values at y - axis, in which the laser direction, and T_max in PP - PP and PP - PS joints are (351.4k) and (425.9k) respectively. Mechanical stresses and strains had low values, about (0.181*〖10〗^9MPa) and (0.166*〖10〗^9 MPa) and strain are about (0.171) and (0.142) for PP - PP and PP - 1PS joint respectively.Finally, it is observed that narrow HAZ area (9.2〖mm〗^2) of PP - PP joint, while penetration depth shows improvement comparing with usual methods, it's value is (2.5mm). In transient model it observes that multiples of HAZ area, and D_p is near its value in steady - state model.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: خالد هادي مهدي العبيدي ندى فاضل توفيق
اسم المؤلف: زينه يونس علي

دراسة تاثير خطوط الضغط العالي على تراكيز غاز الرادون في الهواء باستعمال كاشف الاثر النووي CR - 39 Study of The Effect of High Voltage Power Lines on Radon Concentrations in Air Using Solid State Nuclear Track Detector CR - 39

المستخلص: يتضمن الهدف من البحث دراسة تاثير خطوط الضغط العالي 132kV)و400kV ) في مناطق منتخبة من مدينة بغداد على تراكيز الرادون ونواتج انحلاله باستعمال كاشف الاثر النووي CR - 39. تم توزيع عدد من الكواشف بابعاد (2x1cm²) ولمدة شهر كامل داخل وخارج محطتي بوب الشام 400kV والوزيرية 132kV , كذلك في عدد من الدور السكنية القريبة من خطوط الضغط العالي 132kV ومحطة المعري 132kV القريبة من منطقة العدل ببغداد خلال فصل الخريف. تم تحديد تراكيز الرادون خلال المقارنة مع العينات القياسية، ومن خلال النتائج المستحصلة كانت قيمة المعدل الموزون لتراكيز الرادون داخل الابنية تحت تاثير خطوط الضغط العالي 400kVهي 91.77±0.1122Bq/m³)) وفي الخارج كانت مساوية الى (125.73± o.117 Bq/m³) وتحت تاثير خطوط الضغط العالي 132kV في الداخل كانت مساوية الى 60.03± 0.266 Bq/m³)) اما في الابنية البعيدة عن خطوط الضغط العالي فقد كانت مساوية الى Bq/m³) 23.265± 0.77) وفي خارج الابنية 13.63± 0.99 Bq/m³)) يتضح خلال نتائج الدراسة ارتفاع تراكيز غاز الرادون في المناطق القريبة من خطوط الضغط العالي وبشكل ملحوظ مقارنة مع المناطق البعيدة عن الخطوط مما يدل على ان هناك تاثيرا واضحا لخطوط الضغط العالي على تراكيز غاز الرادون ويزداد هذا التاثير بزيادة شدة المجال الكهرومغناطيسي والقرب من هذه الخطوط, كما كان لخطوط 400kV تاثير اقوى من خطوط 132kV على تراكيز الرادون في الهواء, اما تراكيز غاز الرادون داخل الابنية فكانت اعلى من تراكيزه خارج الابنية , وهذه الزيادة في التركيز تعود الى ان جدران الابنية تعد المصدر الرئيس لتوليد الرادون داخل الابنية , حيث تبين ان مواد البناء قد ادت دورا مهما في زيادة تراكيز غاز الرادون داخل الابنية بالاضافة الى عمر الابنية والارتفاع عن مستوى سطح الارض . | The aim of this research the study of the effect of high Voltage power lines (400kVand132kV) upon radon concentration and its decay results by using nuclear track detectors CR - 39 inside Baghdad city. A number of detectors with the dimensions (2x1cm2) was scattered for a whole month indoor and outdoor Bob Al - sham station 400kV and Al - waziriya station 132kV as well as in number of the houses which are very close from the high voltage power lines 132kV and Al - maary 132kV during autumn. The concentrations of radon were determined through the comparison with the standard samples , The results shows that the value of Weighted Average of radon concentration indoor the buildings which are under the effect of high voltage 400kV is (91.77 ± 0.117Bq/m3) and under the effect of high voltage lines 132kV indoor is equal to (60.03±0.266Bq/m3) ,As for the buildings which are far away from the high voltage lines , it was equal to (23.2651± 0.773Bq/m3) and outdoor the buildings (13.63±0.99 Bq/m3) . The results showed that increase of radon concentration in the areas which are close to high voltage power lines compared with areas which are far away from the lines which show that there is a clear effect of high voltage power lines upon the concentration of radon . And this influence increases with increase of the intensity of electromagnetic field as well as the near distance with these lines .For there was a stronger effect of 400kV lines than 132kV lines upon radon concentration in air, Also the concentration of radon gas indoor the building were higher from its concentration outdoor the building . And this increase in concentration is due to the fact that the walls of the buildings are considered to be the main source for generating radon indoor the building as well
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: العربية
الدرجة: ماجستير
السنة: 2009
الموضوع العام: علوم الفيزياء
اسم المشرف: خالد هادي مهدي العبيدي ندى فاضل توفيق
اسم المؤلف: زينة جميل رحيم عبد علي

الاستقرارية الفيزيائية - الكيميائية للمتراكبات PVA - MnSO4.H2O مع الظروف الجوية Physico - Chemical Stability of (PVA - MnSO4.H2O) Composites against weather conditions

المستخلص: في هذه الدراسه تم تحضير افلام بولي فينيل الكحول وكبريتات المنغنيز المائي باستخدام تقنية الصب مع نسب وزنية مختلفة وهي (2, 5, 10, 15) من كبريتات المنغنيز المائي وقد تم دراسة الخصائص البصريه لها.وقد تضمن هذا العمل ايضا دراسة تاثير الظروف الجوية على الخصائص البصرية لكل النماذج المعرضة.كل النماذج المعرضة وغير معرضة للظروف الجويه شخصت بطرق مختلفة مثل التحليل الطيفي لاشعة تحت الت الحمراء (FTIR)وصور المجهر الضوئي.اظهرت النتائج التجريبية ان طيف الامتصاصيه يزداد بزيادة تركيز كبريتات المنغنيز المائي. فجوة الطاقة تقل بزيادة تركيز الاضافة. وقد تم دراسة الثوابت البصرية الاخرى والتي تشمل (معامل الامتصاص, معامل الخمود, معامل الانكسار, ثابت العزل الحقيقي والخيالي).بعدتعريض النماذج للبولي فينيل الكحول النقي وللمتراكبات (PVA - MnSO4.H2O) وبتراكيز مختلفه وجد ان طيف الامتصاص يزداد بزيادة فترة التعريض. فجوة الطاقه تقل بزيادة فترة التعريض. وقد تم دراسة الثوابت البصريه الاخرى والتي تشمل (معامل الامتصاص, معامل الخمود, معامل الانكسار, ثابت العزل الحقيقي والخيالي).وقد بين طيف (FTIR) عدم وجود تفاعل كيميائي بين المادة المضافة والبوليمر وليس هنالك تكسر بالاواصر الاساسيه لهما بعد التعريض للظروف الجوية, واظهرت صور المجهر الضوئي ان كل النماذج تصبح اكثر خشونة بعد التعريض. | In this study, (PVA - MnSO4.H2O) films are prepared by using casting technique with different concentration of Manganese (II) sulfates monohydrate (2, 5, 10 and 15) wt.% . Also the optical properties is studied, and this work is involved with study the effect of weathering condition of optical properties for all samples which exposure. All the samples that exposure and unexposure to weather conditions have diagnosed by different methods such as fouirer transform infrared spectroscopy (FTIR) and optical microscope images. The experimental results show that the absorption spectrum increased with increasing the concentration of (MnSO4.H2O). The optical energy gap decreasing with increasing of the concentration of the additive. The optical constants (absorption coefficient, extinction coefficient, refractive index, real and imaginary dielectric constants) are studied. After exposure the samples in the form of pure PVA and (PVA - MnSO4.H2O) composites with different concentration found that the absorption spectrum increases with increases exposure time. The optical energy gap decreasing with increasing exposure time. The optical constants (absorption coefficient, extinction coefficient, refractive index, real and imaginary dielectric constants) are studied. The FTIR shows no chemical interaction between the Polymer and the additives and there are no broken fundamental bands after exposure to the weather conditions. Morphological photographs illustrate that the surface of all films become more roughness after exposure.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
الموضوع الدقيق: الفيزياء
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: اسرار عبد المنعم سعيد
اسم المؤلف: زينب كاظم حمزة

تصميم وتصنيع الطلاء المضاد للانعكاس معتمدين طريقة الليزر النبضي في الترسيب DESIGN AND FABRICATION OF ANTI REFLECTION COATING BY PULSED LASER DEPOSITION

المستخلص: في هذا العمل تم تصميم طلاء المضاد للانعكاس بسمك ربع ولاربع طول موجي ودراسة خصائص بصرية للاغشية الرقيقة والاستفادة منهما في تصنيع طلاء مضاد للانعكاس ضمن المنطقة المرئية والحمراء القريبة . اعتمد تصميم الطلاء على مفهومين اساسيين هما نظرية المصفوفة المميزة وتصميم طلاء بسمك ليس ربع طول موجي ولحالة السقوط العمودي للضوء.اخذين بنظر الاعتبار ظاهرة التشتت. تم دراسة نفاذية وانعكاسية الطلاء كدالة للتغير في الطول الموجي للضوء الساقط باستخدام الرزمة البرمجية MATLAB. اوضحت نتائج التصميم امكانية الحصول على انعكاسية واطئة لمدى واسع من الطيف الكهرومغناطسي يشمل المنطقة المرئية ومنطقة الحمراء القريبة عندما يكون السمك البصري ضمن المدى اقل 0.7L لمادة MgF2 المرسبة على الزجاج ويكافي الاسماك الهندسية للغشاء (34.5,36.91,78.3) نانومتر, وامكانية الحصول على انعكاسية واطئة لمدى واسع في درجة حرارة التلدين عند سمك البصري 1.2L ويكافى السمك الهندسي ((141.6 نانومتر. تكتسب هذه النتيجة اهميتها في امكانية تخمين السمك الامثل قبل البدء بمرحلة التحضير حيث اشارت النتائج الى معادلة تجريبية تربط بين عدد النبضات وسمك الغشاء. لغرض تصنيع الطلاءالبصري, تم استخدام طريقة الترسيب بالليزر النبضي لليزر النيديميوم - ياك1064 نانومتر الذي يعامل بتقنية التولد المتوافق الثاني بطول موجي 532 نانومتر والذي يعمل بتقنية عامل النوعية بمعدل تكرارية (1 - 6) هرتز وامد نبضة 10 نانوثانية. لتحضير اغشية فلوريد المغنيسيوم المرسبة على الزجاج, قمنا بدراسة ظروف التحضير التي تتضمن التغير بعدد النبضات (150و250 و350و 450 نبضة) لترسيب اغشية فلوريد المغنيسيوم ومدى تاثيرهم على سمك الاغشية المحضرة وتركيبها وحجم الحبيبات وبالتالي على نفاذيته ومدى امكانية استخدامه كطلاء مضاد للانعكاس. لقياس سمك الاغشية المحضرة, تم استخدام جهاز مقياس اللبسومتر وتم استخدام جهاز المطياف لايجاد النفاذية والانعكاسية والثوابت البصرية ومعاملي الانكسار والتوهين (n, k) وعلى التوالي. اوضحت النتائج بان الطلاء المضاد للانعكاس المحضر من طبقة واحدة يمتلك نفاذية عالية وانعكاسية واطئة تشمل منطقتين من الطيف المرئية والحمراء القريبة وان معامل الانكسار يتراوح بين (1.05 - 1.25( في حين كانت اسماك الاغشية المحضره تتراوح بين )34.5 - 141.6 ) نانومتر, كذلك اوضحت صور (AFM) بان الحجم الحبيبي يتراوح ضمن المدى (86.55 - 94.81) نانومتر. | In this work design and fabricated antireflection coating (AR’C) with single layer. Design of the AR’C was based on the characteristic matrix method with quarter and non - quarter optical thickness. The effect of deposited material at normal incident of light was taken into account and the reflection performance was computed with the aid of MATLAB over the visible and near infrared region. Results show that wideband AR’C was achieved when deposited thin film of MgF2 on glass with non - quarter optical thickness less 0.7L related to geometrical thickness (34.5,36.9,78.3 nm) at room temperature. Also wideband AR’C achieved with non quarter 1.2L optical thickness deposited related to geometrical thickness (141.6nm) at annealing temperature. However results accept significant importance to estimate the optimum thickness before preparation stage. In this study antireflection coating fabricated by using pulsed laser deposition technique (PLD) which deposit MgF2film on glass substrate. Q - switching Nd : YAG laser beam with second harmonic generation (SHG) technique of wavelength 1064 nm and 532 nm, repetition rate 1 - 6 Hz and the pulse duration 10 ns was used. The film thickness, structural behavior and grain size dependent on that prepared conditions which include variation number of shot (150,250,350,450 pulses) have been studied.The thicknesses of MgF2 nanostructure films were measured using Lipsometre. Further, the experimental results shows high transmittance, wideband low reflection and the refractive index within the range (1.05 - 1.25), while the thicknesses are (34.5 - 141.6 nm). Atomic force microscope (AFM) image illustrate that the grain size of the film within the range (86.55 - 94.81) nm
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: الاء نزار عبد الغفار كاظم عبد الواحد عادم
اسم المؤلف: زينب حازم عبد الرحيم

الخواص التركيبية والبصرية والكهربائية لاغشية اوكسيد النيكل المحضرة بطريقة الترذيذ كمتحسس غازي The structural, optical and electrical properties of NiO films prepared by RF - Sputtering as gas sensor

المستخلص: The structural, optical, electrical, and gas sensing properties of nickel oxide have been studied. The structural properties of the deposited films were made using XRD, SEM and AFM. The NiO films have been prepared with different thicknesses (100, 150 and 200) nm on glass, Si and Al2O3 substrates, using RF - sputtering at 100°C substrate temperature. The electrical and optical parameters of the NiO films were characterized using Hall Effect and transmittance measurements.The X - ray diffraction result indicates that the films are of polycrystalline in nature with cubic structure. The grain size of the nanoparticales observed at the surface depended of films thicknesses, where 200 nm has smallest average grain size 85.5 nm and RMS increased with increasing of thicknesses.The optical characterization shows that the film has band gap that ranged in between 3.6 eV to 3.9 eV, the average transmittance of films was found to be ranged of 60% to 85% in the VIS - IR regions. The dark conductivity of NiO films has been studied as a function of film thickness, crystal structure transformation and temperature with particular regard to gas sensitivity in CO2, NO2, CO, NO and the ethanol vapor. The electrical properties were found to be dependent on the film thickness.I - V characteristics for NiO films at (air, vacuum, N2, O2andCO2) gases before and after annealing were investigation. It would appear from our result that the diminution of the dark conductivity after annealing may be due to the surface contaminations adsorbed on the surface of the NiO film during film preparation or from ordinary atmospheric air.The resistivity of the NiO thin films decreased with increasing of thicknesses, from 1.5x105 to 5.4x104 (Ω.cm), which is related to the increase of carrier concentration with film thickness. The results of measurements of NiO thin films show that these films have good conductivities and results obtained from Hall Effect indicate that the NiO films were (p - type).It was found that the sensitivity to other gases differs for different film thicknesses and working temperature. Furthermore, NiO films exhibits high and fast response to NO2 gas at 200°C, which makes it a promising candidate for a poisonous gas sensing.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: دكتوراه
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: قاسم عزيز محمد محمد عبد النبي
اسم المؤلف: زينب طارق عبد الحميد

تصميم وتصنيع طلاء بصري مضاد للانعكاسية متعدد الطبقات لمجمعات الطاقة الشمسية الحرارية ذات التزجيج الملون Design and Fabrication of Optical Multilayer Anti - reflection Coating for Colored Glazed Thermal Solar Collectors

المستخلص: يلعب الجانب الجمالي للمجمعات الشمسية الحرارية دورا هاما في تكامل واجهات المباني ويستند المظهر الملون الى مبدا التداخل لطلاء الاغشية الرقيقة على الجانب الاخر من الغطاء الزجاجي . ان وجود طبقات متعددة للمرشحات البصرية التداخلية على المجمعات المزججة يمكن ان ينتج انعكاس ملون في المنطقة المرئية ولا يحدث المظهر الملون خسائر مفرطة للطاقة بينما ينفذ الجزء غير المنعكس في منطقة الاشعة تحت الحمراء القريبة داخلا على شريط الامتصاص لزيادة كفاءة المجمع الشمسي الحراري . تقدم هذه الدراسة فكرة بسيطة للحصول على تزجيج ملون لاخفاء اللون الاسود والانابيب الظاهرة وتموجات شريط الامتصاص المعدني للمجمعات الشمسية الحرارية والتي تعتبر عقبة اساسية في تكامل المجمعات الشمسية الحرارية كواجهات للمباني وذلك بتصميم طبقات متعددة لمرشحات بصرية تداخلية من خلال محاكاة نظرية ومن ثم تصنيع هذه التصاميم عمليا ومقارنة النتائج عمليا ونظريا . تـم توظيـف مواد عازلة ملائمـة مثـل ثنائـي اوكسيد السليـكون (SiO2)ذو معامـل الانكسار العالـي nH =1.47 ومغنيسيوم فلورايد (MgF2) ذو معمل الانكسار الواطيء nL =1.38 وبسمك ربع طول موجي (H) و(L) لمعامل الانكسار العالي والواطيء على التوالي . استخدام برنامج الماتلاب في جزء المحاكاة النظري والذي صمم لهذه الدراسة . تم تصميم نموذجين بصريين كما تم استخدام نوعين من القواعد الزجاجية . ان اول نموذج بصري هو HL//glass لقيمتين من الطول الموجي المستخدم للتصميم (0) = 558 نانومتر و700 نانومتر ومن 2 - 40 طبقة . تم استخدام نوعين من القواعد الزجاجية ، النوع الاول شريحة زجاج مجهرية ذات معامل انكسار 1.5131 استخدم في هذا النموذج البصري طولين موجيين للتصميم 0 = 558 نانومتر و700 نانومتر ، النوع الثاني من القواعد الزجاجية هو BK7 ذو معامل الانكسار 1.515 استخدم في هذا النموذج البصري عندما طول موجة التصميم 0 = 700 نانومتر . النموذج البصري الثاني LH//glass تم باستخدام قاعدة زجاجية لشريحة مجهرية ولطول موجة التصميم واحد وهو 0 = 558 نانومتر من 2 - 40 طبقة . هذه التصاميم صنعت عمليا باستخدام تقنية الترذيذ بالتردد الراديوي ذو المغناطيس المستوي ، عشر طبقات رسبت بالتعاقب على شريحة زجاجية مجهرية من (SiO2) ذو معامل الانكسار العالي (H) و(MgF2) ذو معامل الانكسار الواطيء (L) على التوالي للتصاميم البصريةHL//glass وLH//glass عند طول موجة التصميم 0 = 558 نانومتر . كذلك عشر طبقات رسبت على القاعدة الزجاجية BK7 للنموذج البصري HL//glass عند 0 = 700نامومتر ولكن عند استخدام القاعدة الزجاجية للشريحة المجهرية للنموذج البصري HL//glass عند 0 = 700 نانومتر رسبت 16 طبقة من هاتين المادتين العازلتين . اظهرت المحاكاة الحاسوبية السلوك البصري لهذه المرشحات من 2 - 40 طبقة ولاعداد فردية وزوجية من الطبقات مثل الانعكاسية المرئية (Rvis.) ، الانعكاسية الشمسية (Rsol.) ، اعظم قمة لمنحني طيف الانعكاسية في المنطقة المرئية (RMax.) ، النفاذية الشمسية (Tsol.) وعامل الجدارة (M) . عمليا تم حساب (RMax.) و(Rsol.av.) و(Tsol.av.) . ان التحدي في هذه الدراسة هو ايجاد افضل نموذج بصري يمتلك اقل انعكاسية شمسية (Rsol.) واعظم نفاذية شمسية (Tsol.) لزيادة كفاءة المجمع الشمسي الحراري وفي نفس الوقت الحصول على انعكاس ملون يكسب المجمعات الشمسية الحرارية التي تستخدم كواجهات للابنية جانب جمالي . لقد وجد عمليا ان التصميم البصري الثاني (L/H//microscopic glass slide) عند0 = 558 نانومتر يمتلك اقل (Rsol.) واعلى (Tsol.) من البداية عند طبقتين حتى الوصول الى الطبقة العاشرة والتي تمتلك (Rsol.) =18.56025 % و(Tsol.) = 81.33469 % لذلك يمكن اعتبار هذا النموذج هو افضل نموذج بصري يمتلك اعلى كفاءة شمسية حرارية ويظهر انعكاس ملون (اخضر) جيد . لكن يعتبر عمليا النموذج البصري الاول (H/L//microscopic glass slide) عند0 = 700 نانومتر هو افضل نموذج بصري يستخدم للتلوين . ان المرشحات البصرية التداخلية متعددة الطبقات تظهر في هذه الدراسة انعكاس ملون اخضر في المدى المرئي ونفاذية مقبولة ومنطقة مضادة للانعكاسية في مدى الاشعة تحت الحمراء القريبة . بالرغم من زيادة طول موجة التصميم(0) عمليا من 558 الى 700 نانومتر تبقى هذه المرشحات تظهر انعكاس ملون اخضر .نجحت هذه الدراسة منذ البداية في اظهار ان الطلاء الترذيذي متعدد الطبقات حقق المتطلبات التالية : ا - امتصاصية شبه صفرية .ب‌ - قمة انعكاسية لونية في المنطقة المرئية .ت‌ - نفاذية شمسية مقبولة . | An aesthetic aspects play an important role in facades integration buildings of the thermal solar collectors , the principle of the colored appearance is based on interference in the thin - films coating on the reverse side of the cover glass . The presence of multilayered optical interference filters on the collector glazing can produce a colored reflection in the visible region , the colored appearance should not cause excessive energy losses , while transmitting the non - reflected radiation in the near IR region entirely to the absorber sheet to increase the efficiency of the thermal solar collector . This study presents simple idea to get a colored glaze to hide the black color, and the visibility of tubes and corrugations of the metal sheet (absorber) of the thermal solar collectors which is considered the main obstacle to facade integration buildings of solar thermal collectors by designing a multilayer optical interference filters during theoretical simulation and fabricate these designs experimentally then compare the theoretical and experimental results . Appropriate dielectric materials, silicon dioxide (SiO2) of high refractive index nH =1.47 and magnesium fluoride (MgF2) of low refractive index nL =1.38 were employing with quarterwave thicknesses (H) & (L) for high and low refractive index layers respectively . In theoretical simulation part a matlab program has been used which was designed for this study . Two optical models were designed and two kinds of glass substrates were used . The first optical model is HL//glass , for two design wavelength values (0) 558 nm and 700 nm from 2 - 40 layers . Two types of glass substrate were used , the first one was microscopic glass slide substrate with refractive index 1.5131 , it was used in this optical model two types of design wavelength (0) = (558 & 700) nm , the second kind of glass substrates was BK7 (Borosilicate Crown) glass with refractive index 1.515 it was used in this optical model when the design wavelength 0=700 nm . The second optical model is LH//glass by using microscopic glass slide substrate for one design wavelength is 0= 558 nm and for 2 - 40 layers. These designs were fabricated experimentally by using RF planer magnetron sputtering technique , 10 layers for high refractive index (H) (SiO2) and low refractive index (L) (MgF2) were deposited alternately for the optical models HL//glass and LH//glass at 0= 558 nm on the microscopic glass slide . Also 10 layers were deposited on BK7 glass substrate for the optical model HL//glass at 0= 700 nm but by using microscopic glass slide substrate for the optical model HL//glass at 0= 700 nm there were 16 layers deposited from these two dielectric materials . The computer simulation exhibit the optical behavior of this filters from 2 - 40 layers and for odd and even numbers of layers such as visible reflectance (Rvis.), solar reflectance (Rsol.), maximum peak of reflectance spectrum curve (RMax.) in the visible region , solar transmittance (Tsol.) and merit factor (M) . Experimentally (RMax.) , (Rsol.av.) and (Tsol.av.) were calculated . The challenge in this study is to find the best optical model which has less (Rsol.) and larger (Tsol.) to increase the efficiency of the thermal solar collector and in the same time get the colored reflection to gain esthetic aspect for the thermal solar collectors which was used as building facades . It is found experimentally that the second optical model (L/H//microscopic glass slide) at 0= 558 nm have low (Rsol.) and high (Tsol.) from the beginning at 2 layers until reaching the 10 layer which has (Rsol.)= 18.56025 % and (Tsol.)= 81.33469 % , therefore this model can be considered as the best optical model which has higher solar thermal efficiency and exhibits good )green( colored reflection . But the first optical model (H/L//microscopic glass slide) at 0= 700 nm was considered experimentally the best optical model used for coloration . The multilayer optical interference filters in this study exhibit green colored reflectance in the visible range and acceptable transmission and antireflection region in near IR range . Despite the increase in design wavelength (0) from 558 nm to 700 nm . These filters experimentally remain exhibit green colored reflection . This study was succeeded at the first attempt to show that a sputtered multilayer coating can fulfilled the requirements
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: دكتوراه
الموضوع الدقيق: فيزياء الطاقة الشمسية
السنة: 2014
الموضوع العام: علوم الفيزياء
اسم المشرف: عبد الحسين خضير لطيف امال محمد الحلو
اسم المؤلف: زينب ارحيم حسين الاسدي

تحضير ودراسة الخصائص الامتصاصية لاكاسيد الفيرايت باستخدام طريقة السيراميك Preparation and Study the Absorption Properties of Ferrite Oxides using Ceramic Method

المستخلص: Compounds of ferrimagnetic materials were prepared in this work in order to investigate and evaluate the microwaves absorption at X - band with the range of frequencies (8 - 12.5 GHz) and Ku - band with the range of frequencies (12.5 - 18 GHz). And the second band is used for the first time in Iraq.Conventional Ceramic techniques (the solid state reaction method) were used to prepare three compounds of spinel ferrite : Cu - Zn ferrite, with formula (Cu1 - xZnxFe2O4), Mg - Zn ferrite, with formula (Mg1 - xZnxFe2O4), and Ni - Zn ferrite, with formula (Ni1 - xZnxFe2O4) at values of x = (0.0, 0.1, 0.3, 0.4, 0.5, 0.6), where x is the proportion of zinc in the ferrite, as bulk (54) samples of rectangle in dimensions (22.6*10*10 mm) within in X - band refine it to make its dimensions (15.5× 7.5×10) mm within in the Ku - band.The resonance peaks of three types of spinel ferrite appeared at the frequencies (9, 10, 11, 14, 15, 16, 17) GHz, and these peaks remain at the same frequencies with a different thickness for all types of ferrite, this indicates that the peaks are not related to thickness.For all samples it was found that the effect of increase the thickness and sintering temperature increased the values of attenuation and absorbance. And the best values of the absorbency were in the range of (Ku - band).The value of total transmission and the absorbance is 100% for sample of (Ni0.9Zn0.1Fe2O4) were the best values at (1050) °C then (14) GHz.The best results were obtained in this research, and the best values of absorbance and stability are (CuFe204, Cu0.9Zn0.1Fe2O4, Cu0.9Zn0.1Fe2O4,Cu0.4Zn0.6Fe2O4) that had been burned by (1000, 1050, 1100, 1050) respectively. These samples were range of (Ku - band).The best result was similarity in behaviour of absorbance for the sample (Mg0.6Zn0.4Fe2O4) at the range (X - band).X - ray diffraction results showed that the structure was polycrystalline for all samples and for all (X) values.The density of samples greatly depends on the temperature of sintering, witch increases proportionally with the temperature of the sintering
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2014
الموضوع العام: علوم الفيزياء
اسم المشرف: كاظم جواد كاظم الشجيري
اسم المؤلف: زياد طارق اسماعيل العبوسي

تراكيز النويدات الطبيعية والصناعية في نماذج بيئية مختلفة لمدينة العمارة - محافظة ميسان Natural and Artificial Radionuclide Concentrations for different Environmental Samples in AL - Amara city - Missan Governorate

المستخلص: الهدف من هذه الدراسة يتضمن جزئين الجزء الاول يتمثل بتقييم مستوى النشاط الاشعاعي الطبيعي والصناعي للعينات البيئية (تربة سطحية ,ومياه نهر دجلة , ومياه محطات التصفية ,ورواسب نهر دجلة) التي جمعت من مواقع مختلفة في مدينة العمارة - محافظة ميسان باستعمال تقنية مطيافية اشعة كاما مع كاشف الجرمانيوم عالي النقاوة (HPGe) ذي الكفاءة 40% وقدرة تحليل 1.8keV للطاقة 1.33MeV العائدة لنويدة الكوبلت - 60 وذلك لقياس الفعالية النوعية لليورانيوم - 238والثوريوم - 232 والبوتاسيوم - 40 والسيزيوم - 137 للوقوف على المستويات الاشعاعية, فضلا عن حساب مؤثرات الخطورة الاشعاعية لاشعة كاما (فعالية الراديوم المكافئة (Raeq),ومعدل الجرعة الممتصة في الهواء(Dɣ),والجرعة الفعالة السنوية للتعرض الخارجي (〖AEDE 〗_out) والداخلي (〖AEDE 〗_in),ودليل الخطورة الخارجي(Hex) والداخلي (Hin),ودليل الخطورة لاشعة كاما I_γ))) في النماذج البيئية المذكورة انفا.وقد بينت نتائج الدراسة الحالية ان معدلات الفعالية النوعية لليورانيوم - 238 والثوريوم - 232 والبوتاسيوم - 40 والسيزيوم - 137 ومعدلات مؤثرات الخطورة الاشعاعية لاشعة كاما في العينات البيئية كانت جميعها اقل من الحد المقبول به عالميا.اما الجزء الثاني من هذه الدراسة هو قياس تراكيز غاز الرادون في العينات البيئية (تربة سطحية ,ومياه نهر دجلة ,ومياه محطات التصفية ,ورواسب نهر دجلة ,وهباء الهواء) التي جمعت من مواقع مختلفة في مدينة العمارة - محافظة ميسان ,وذلك باستعمال تقنية كواشف الاثر النووي للحالة الصلبة نوع (CR - 39),فضلا عن حساب مؤثرات الخطورة الاشعاعية لغاز الرادون (محتوى الراديوم الفعال (CRa) ,و معدل الانبعاث الكتلي للرادون (EX(M)) ,و معدل الانبعاث السطحي للرادون (EX(S)) ,و مؤشر الفا (Iα) ,والرادون المذاب Cd)) ,و الجرعة الفعالة السنوية للرادون AEDw))) في النماذج البيئية المذكورة انفا.و بينت نتائج الدراسة الحالية ان معدلات تركيز الرادون - 222 في العينات البيئية كانت جميعها اقل من الحد المقبول به عالميا.يستنتج من هذه الدراسة ان بيئة مدينة العمارة هي ضمن الخلفية الاشعاعية الطبيعية . | The aim of this study includes two parts, the first part is to assessment level of natural and artificial radioactivity of environmental samples (surface soil, water of the Tigris River ,water filtering stations and sediments of the Tigris River) collected from various locations in AL - Amara city - Missan government using gamma - ray spectroscopy technique with High purity Germanium detector (HPGe) which has a photo peak relative efficiency of( ≥40 % ) and an energy resolution of (≤1.8 keV) for the 133 MeV gamma transition of 60Co to measure Specific activity concentration of 238U, 232Th, 40K and 137Cs, Also Evaluation of radiological hazard effects for Gamma ray (Radium Equivalent Activity (Raeq), Absorbed Dose Rate in Air (Dɣ), Annual effective dose outdoor (〖AEDE 〗_out) and Annual effective dose indoor(〖AEDE 〗_in), Hazard index outdoor )Hex( and Hazard index indoor) Hin (and gamma Index (I_γ)) In environmental samples listed above.The results of the present study have shown that the rates of Specific activity of 238U, 232Th, 40K and 137Cs and radiological hazard effects Rate for Gamma ray in environmental samples were all lower than the value of the global limit.The second part of this study is to measure the concentrations of radon gas in environmental samples (surface soil , water of the Tigris River, filtering water stations , sediments of the Tigris River and dust air) which collected from various locations in AL - Amara city - Missan government using Solid State Nuclear Track Detectors type (CR - 39), In addition to Evaluation of radiological hazard effects for Radon gas (Effective radium content (CRa), Mass exhalation rate for Radon ????????(????), Surface exhalation rate for Radon ????x(????), Alpha index (Iα), Radon dissolved )Cd) and Annual effective dose )AEDw)) In environmental samples listed above.The results of the present study have shown that the rates of radon - 222 concentration in environmental samples were all less than the global limit.We conclude from this study that the environment of Amara city is within normal background radiation.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: دكتوراه
الموضوع الدقيق: فيزياء التلوث البيئي
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: خالد هادي مهدي العبيدي
اسم المؤلف: زهراء عبد الحسين اسماعيل السوداني

تصنيع ودراسة خواص معدن - فثالوسيانين العضويه كمتحسس حرارة Fabrication and Study Properties of Organic Metal - Phthalocyanine as Temperature Sensor

المستخلص: Copper Phthalocyanine tetrasulfonic acid tetrasodium salt (CuPcTs) thin films with different annealing temperatures (100, 150 and 200)oC have been prepared by spin coating technique on glass & ITO substrate with speed rate of 1000 rpm for 1 min, the obtain films have 100±5 nm thickness. This dissertation deals with different measurement techniques (Thermal, Structure, Morphological, Optical and Electrical measurements) in order to investigate the optimum condition to fabricate sensor device.The structures of CuPcTs thin films which deposited on glass substrate have been studied by X - ray diffraction (XRD), Atomic Force Microscope (AFM) and (FESEM) techniques, XRD studies show that thin films have polycrystalline structure for all annealing emperatures with perfect orientation (001). Also the surface morphology by AFM measurement for CuPcTs thin films has been studied; it shows that all films after heat treatment go to Nano size. The roughness decreases with increasing temperatures, and by (EDX) technique the elemental ratios of thin films are determined.The optical measurement showed that the as - deposited and annealed films have two peaks which are (B, Q1and Q2) bands, B in Ultra Violet region attributed to transition between d level for Cu metal and π* in LUMO, and Q bands in Visible region attributed to the transition between π(HOMO) - π* (LUMO). These measurements demonstrated that the energy gap of CuPcTs depends on the annealing temperatures, the photoluminescence spectra (PL) showed the traps inside energy gap play an important role and effect onoptical behavior. It’s studied to confirm the results of optical band gap, FTIR spectra give results about the bonds of (CuPcTs) and its position compared with H2Pc as a reference. The electrical properties of these films were studied with differentannealing temperature. Hall measurements showed by increasing thin films temperature the conductivity decreased at 100oC then it increase at 150oC finally it returned to decrease that may be due to phase transitions, all the films are p - type.CuPcTs Capacitive - Resistive surface type temperature device sensor has been fabricated by using two electrodes (Aluminum and Silver), the capacitive response of this sensor was observed by Raising the temperature gradually.Capacitive - Resistive temperature sensor showed that the response to variation of temperature in range (RT - 200)0C and the response time ≈ 20±5 Sec. for two electrodes, The fabricated sensor appear enough sensitivity and good response and recovery times and strong affected by frequency variation.Practical experience has shown results that aluminum electrode has capacitance and resistance higher than the silver electrode depending on the different frequencies values, while the silver electrode has the shortest response time.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: ندى خضير عباس
اسم المؤلف: رؤى مثنى علي

تقييم المقاطع العرضية لليورانيوم للتفاعلات المستحثة بالنيوترون Cross Sections Evaluation of Uranium for Neutron Induced Reactions

المستخلص: لقد تم في هذا البحث حساب قيم المقاطع العرضية لنظائر اليورانيوم (A=230 - 238) للتفاعلات المستحثة بالنيوترونات التالية ,,,(n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), (n,γ), (n,p), (n,t), (n,d), (n,α), (n,2α),and (n,2p)المقاسة بفترات مختلفة من الطاقة حيث ان هذه القراءات تم اخذها من الوكالة الدولية للطاقة الذرية (IAEA ) ومن المكتبات المشهورة عالميا مثل EXFOR, CINDA, ENDF, JEFF, JENDL,ROSFOND,CENDL,WIND, TENDL, BROND, IRDF, EAF وقد تم قياسها في الفترة الاولى من منتصف القرن الماضي وحتى اخر سنوات الماضية .لقد تم تحليل المديات الكاملة للطاقة لكل تفاعل وقد تم اعادة حساب وتقييم المقاطع العرضية ضمن فترات صغيرة مختلفة حسب مديات الطاقة للنيوترون القاصف مع الاخطاء المرافقة لها. قد تم وضع صيغ رياضية لمتعددة الحدود في معظم التفاعلات والتي تربط بين تغيير المقطع العرضي مع الطاقة والتي يمكن استخدامها للتنبىء بقيم المقاطع العرضية غير المحسوبة. لقد تم حساب قيمة Q - للتفاعل وطاقة الربط وطاقة العتبة وفرق الكتلة وعامل الرص لكل تفاعل ولكل عنصر هدف. ان التقييمات اعتمدت بشكل رئيسي على حسابات نموذج الجهد البصري لقد اعتمدت الحسابات على معاملات الجهد البصري النووي حيث تم اختيار وجمع المعلومات من مكتبة (RIPL) التابعة للوكالة الدولية للطاقة الذرية. لقد قمنا بدراسة صيغتين مختلفتين لنموذج الجهد البصري حيث ان الصيغة الاولى تسمى نموذج الجهد البصري القياسي والمعاملات ماخوذة من مكتبة Beijing والصيغة الثانية لنموذج الجهد البصري قد تم حسابها بتحديد ثلاث مديات طاقية. لقد قمنا بدراسة نسبة التفاعل (n,f) لكل نظير من نظائر اليورانيوم نسبة الى يورانيوم - 235 والذي يعتبر نموذج قياسي. لقد قمنا بحساب هذه النسبة لجميع التفاعلات المتوفرة لدينا وليس فقط تفاعل الانشطار واحتسبناها نسبة الى يورانيوم - 235.حساب اخر تم اضافته الى هذه الدراسة وهو دراسة تاثير التلوث لوليدة اليورانيوم - 237 والتي هي نبتونيوم - 237 بعمر نصفي 6.8 يوم وكذلك حساب الفيض النيوتروني لكل منهما. | The cross sections of Uranium isotopes (A=230 - 238) for the (n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), (n,γ), (n,p), (n,t), (n,d), (n,α), (n,2α),and (n,2p) reactions are calculated with different energy intervals which are collected from International Atomic Energy Agency (IAEA). The available cross sections data for the reactions mentioned above are collected from the well known international libraries like EXFOR, CINDA, ENDF, JEFF, JENDL, ROSFOND, CENDL, WIND, TENDL, BROND, IRDF, EAF and measured during the period from the middle of the last century up to several years ago.The cross sections are reproduced in fine steps of incident neutron energy in different intervals with the corresponding errors. The recommended cross sections for all available experimental data have been calculated for all considered reactions mathematical representative equations for all these reactions are formulated. These equations represent the variation of the cross section with energy, which could be used to predict the values of uncalculated cross sections.Q - value, threshold energy, binding energy, mass excess, and packing fraction for each reaction and target element have been also calculated.The evaluations are based mainly on the calculations of the optical model potential. The calculations are based on the nuclear optical potential, where the relevant parameters are collected and selected from Reference Input Parameter Library (RIPL) which is being developed under the international project coordinated by the International Atomic Energy Agency (IAEA). We study two different formula for optical model potential the first formula is the standard optical potential model and its parameters are taken from Beijing library. The second formula is the optical potential with different energy ranges. We study the ratio of the (n,f) cross sections for each Uranium isotopes relative to (n,f) cross section for U - 235 which could be considered as a standard sample. We have done the ratio not for the (n,f) cross sections only but also for other reactions like ,(n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), and (n,γ) relative to U - 235 reactions cross sections.Another evaluation is added to cross sections is the effect of the contamination of the daughter of U - 237 which the daughter is Np - 237 6.8day and their relative flux
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
الموضوع الدقيق: الفيزياء
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: ايمان طارق العلوي
اسم المؤلف: روناك اكرام علي

دراسة تاثير المعاملة الحرارية على الخواص التركيبية والميكانيكية لبوليمر (بولي تيترافلورواثيلين) Study the Effect of Heat Treatment on the Structural and Mechanical Properties for poly (tetrafluoroethylene

المستخلص: درس في هذا العمل نوعين من بولي تيترافلورواثيلين ( النقيين ولكن باختلاف الشركة المصنعة PTFE) (صيني _اماراتي ) بطريقه صب المحلول كافلام رقيقه واشرطة , بواسطه الخواص التركيبيه (حيود الاشعه السينيه ومسعريه المسح التفاضلي ) والخصائص الميكانيكية بدلاله درجات حراره مختلفة للدوره الحرارية . يبين كلا النوعين تغير في الشده المستطاره من المستوى القاعدي (100) عند تغير درجه حرارة الدورة الحرارية واظهر النوعين زيادة في التبلورية مع زياة درجة الحرارة .كذلك اختلاف في الانثالبي عند اختلاف درجات الحرارة حيث لوحظ زياة الانثالبي بزيادة درجة الحرارة واختلاف في الخصائص الميكانيكيه ( الاجهاد والانفعال عند نقطة الخضوع ونقطه الكسر ومعامل يونك) للبوليمر حيث اظهرت المعالجة الحرارية للبوليمر بدرجات حرارة مختلفة من اجل معرفة خصائصه ومقاومته الى الظروف البيئية ان الخواص الميكانيكية تزداد زيادة خطيا مع زيادة درجة الحرارة .لوحظ بان انتاج الشركه المصنعة الصينية افضل من ناحية النتائج لايجاد درجة التبلورية والخصائص الميكانيكيه عن انتاج الشركة المصنعة الاماراتية لنفس المادة البوليمرية | In this study two modifications of pure polytetrafluoroethylene (PTFE) [C2F4]n. China_UAE source prepared from solution cast as film and strip have been studied by structural (X - ray diffraction (XRD), Differential Scanning Calorimetry (DSC)) and mechanical properties .subjected to different temperature heating cycle. Both modifications show variation in the scattered X - ray intensity of the basal plane (100) as the temperature of heating cycle is changed and show increasing in crystallinity with the increase of temperature .Moreover, the Enthalpy of each kind is changed with difference of heat treatment where the enthalpy increase with the increase of temperature, and two modifications show different in mechanical properties for PTFE (young's modulus, stress at break, stress at yield, elongation at yield. And elongation at break) when the temperature is change ,The heat treatment of polymer to different temperatures in order to know its properties and resistance to environmental conditions results showed that the mechanical properties increase linearly with the increase of temperature.It seems that the product company of china is better than the product company of UAE in degree of crystallinity and mechanical properties for this polymer.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: مي عبد الستار محمد نجيب
اسم المؤلف: رند باسم لطفي الكرخي

الدراسه النظريه لتصميم ماكنه بؤره البلازما وتحقيق العوامل المختلفه التي تؤثر على حصيله النيترون المنبعث Theoretical study to design plasma focus machine and investigate various parameters that affect its emitted neutron yield

المستخلص: في هذا البحث تم تصميم جهاز بؤرة البلازما الكثيفة نظريا بالاعتماد على موديل (لـــي) بناءا المعادلات الرياضية لنموذج لي لكل من هندسة القطبين وعناصر الدائرة الخارجية التي تضم متسعة ومحاثة ومقاومة (RLC). وبعد اجراء الحسابات اللازمة تم ادخال نتائج التصميم في برنامج لرؤية مدى امكانية تشغيله نظريا من خلال دراسة المعلمات المختلفة التي يوفرها البرنامج وبالتالي التعرف على ظروف تشغيله والعوامل المؤثرة عليه. لقد اختير غار الديترويوم كغاز عامل في هذه المنظومة للحصول على ناتج نيتروني من اجل التفاعل النووي الاندماجي. وتم اختبار ودراسة المنظومة عند ضغطين مختلفين (3و4 تور) حيث درست مختلف معلماتها التي يوفرها البرنامج ونوقشت وقورنت النتائج بالاشكال البيانية. اضافة لذلك تمت مقارنة المنظومة المصممة مع منظومة قياسية تناظرها من حيث التركيب النظري وهي منظومة NX2 التي بنيت اساسا للحصول على الاشعة السينية باستعمال غازات النبيلة. اختير في البحث ان يكون غاز الديتريوم هو الغاز العامل للحصول على ناتج نيتروني من اجل المقارنة، حيث درست جميع معلمات التشغيل للمنظومة المصممة مع القياسية بالرسوم البيانية.لقد وجد من خلال انجاز الحسابات اللازمة بان الشكل البياني لانحدار تيار الانبوب الكلي (dip) مباشرة بعد قمة التيار مع الزمن للمنظومة المصممة متفق تماما مع الشكل العام المميز لمنظومات بؤرة البلازما التجريبية دلالة على ان حسابات التصميم صالحة لهذه المنظومة وبالتالي يمكن اجراء الحسابات. ان تصرف فولتية الانبوب مع الزمن للمنظومة المصصمة كان بنفس الشاكله مع المنظومة القياسية. وينطبق هذا على سلوك المعلمات الاخرى بين المنظومتين مثل السرعة والمسار المحوريان والمسار الى الداخل للصدمة الشعاعية ومسار وسرعة استطالة القرص ومسار وسرعة الصدمة المنعكسة شعاعيا وغيرها.تم دراسة ومقارنة تغيرات درجة حرارة البلازما مع الزمن للمنظومتين عند نفس الضغط ولضغطان مختلفان للمنظومة المصممة وكان تصرف ماكنتا بؤرة البلازما بنفس الطريقة. وتم حساب الخسائر المتولدة من الماكنتان مثل خسائر جول وبرمنشتهالنك واعادة الاتحاد وخسائر الطاقة الشعاع الخطي مع الزمن. اخيرا وجد ان المنظومة المصممة ( 1.66 × neutron per shot ) توفر ناتج نيتروني اكبر من المنظومة القياسية (5.15 × neutron per shot) . لقد تصرفت المنظومة المصممة مثل المنظومة القياسية لكن كان الاختلاف في سلوك المنظومة المصممة والقياسية هو اختلاف الترتيب الهندسي للمنظومتين من حيث هندسة الاقطاب واختلاف قيم العناصر الكهربائية للدائرة الخارجية. ان المنظومة المصممة نظريا في هذا البحث يمكن ان تكون مشروع لبناء ماكنة بؤرة بلازما تطبيقية للحصول على ناتجها النيتروني العالي للاستفادة منه في اجراء تفاعل الاندماج النووي.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
الموضوع الدقيق: فيزياء البلازما
السنة: 2014
الموضوع العام: علوم الفيزياء
اسم المشرف: مصطفى كامل جاسم رعد حميد مجيد
اسم المؤلف: رنا عيســـى بــك مــــراد

تصنيع ودراسة خصائص كاشف المفرق الهجين Cdo/ Si المشاب والمحضر بطريقة الرش الكيميائي الحراري Fabrication &Characterization Heterojunction Photodetector of Cdo/ Si by Spray Pyrolysis Technique

المستخلص: تم في هذا البحث تصنيع ودراسة خصائص كاشف المفرق الهجين نوع CdO/p - Si المشوب اذ حضرت اغشية اوكسيد الكادميوم(CdO) بطريقة الرش الكيميائي الحراري وبدرجة حرارة قاعدة ثابتة 380o C) ) وبالتراكيز المولارية M(0.1, 0.15, 0.2, 0.25) وشوبت بعنصري النحاس والالمنيوم بنسب (0.5%, 1%, 3%, 5%) على الزجاج وعلى شرائح من السليكون احادية التبلور (Single Crystal) من نوع p - type ذات اتجاهية بلورية (100) ومقاومية كهربائية (2 - 20 Ω.cm) ومن نوع n - type ذات اتجاهية بلورية(100) ومقاومية كهربائية (10 Ω.cm) وسمك يتراوح بين (400 - 600 nm) .ودرست الخواص التركيبية والطوبوغرافية والبصرية والكهربائية لغشاء CdO بتغير التركيز المولاري وبثبوت درجة حرارة القاعدة (Ts) لقد اوضحت نتائج حيود الاشعة السينية ان اغشية CdO ذات تركيب بلوري مكعب وان اعلى شدة كانت عند المستوي (111) , اوضحت النتائج البصرية ان قيم فجوة الطاقة تعتمد بشكل كبير على التركيز المولاري اذ وجدت ان قيم فجوة الطاقة لغشاء CdO النقي كانت تتراوح مابين 2.61 eV الى 2.34 eV ولوحظ ان فجوة الطاقة تبدا بالنقصان مع زيادة التشويب بالالمنيوم والنحاس مقارنة مع اغشية CdO النقية . حيث ان فجوة الطاقة عند التشويب بالنحاس كانت تتراوح مابين 2.5 eVالى 2.31 eV وتتراوح مابين 2.62 eV الى 2.48 eV عند التشويب بالالمنيوم.اوضحت نتائج قياس تيار - جهد للكاشف الضوئي ان مقدار عامل المثالية (Ideality factor) للكواشف المحضرة بمولارية وتراكيز اشابة مختلفة يزداد مع زيادة التركيز المولاري وان افضل قيمة له كانت بحدود 1.7 عند تركيز 0.5% وبالنسبة لشوائب النحاس وبحدود 1.8 بالنسبة لشوائب الالمنيوم بتركيز 0.5% .اظهرت نتائج قياسات الاستجابية الطيفية ان الكواشف المصنعة تعمل ضمن المنطقة الطيفية (400 - 850nm) ووجود قمتين لكاشف (CdO/Si) المشوب وغير المشوب الاولى تقع عند الطول الموجي (550 nm) والتي تعود الى غشاء CdO والثانية عند الطول الموجي (800 nm) والتي تعود الى السليكون. لقد اوضحت نتائج الاستجابية الطيفية للضوء الابيض ان الكواشف تمتلك خصائص خطية جيدة ولاوجود لمنطقة اشباع وان هذه الخصائص تحسنت بعد الاشابة.تم حساب الكشفية النوعية للكواشف المصنعة ووجد انها تتغير مع ظروف التحضير حيث ان اعلى قيمة لها كانت بحدود 6*1011(HZ1/2.W - 1.cm) عند الطول الموجي 500nm وبلغت 7*1011(HZ1/2.W - 1.cm) عند الطول الموجي 700nm للكاشف المصنع CdO : Al/Si المشوب بتركيز 5% . | We discussed in this research Manufacturing and study the detector hybrid retail properties type CdO/ P - Si the doping ,If film were prepared the Cadmium Oxide (CdO), by the way chemical spraying with tempratuer the constant base (380oC) And molar concentrations (0.1, 0.15,0.2,0.25)M. It was the doping for two element Copper and Aluminum with percentages (0.5%, 1%, 3%, 5%) on the glass and the slides of Silicon crystallization single from p - type With crystalline directional (100) and Electrical resistivity (2 - 20 Ω .cm) and from N - type With crystalline directional (100) and Electrical resistivity (10 Ω .cm) at thickness between (400 - 600 nm).We study the Characteristics Synthetic and Optical and Electrical the film CdO , by change molar concentrations with tempratuer the constant base (Ts) , I have explained the results X - ray diffraction that film CdO With a cubic crystalline structure And that the highest intensity was at the level of (111), The results showed of optical that value Energy gap the large dependent on molar concentrations , It was found the value Energy gap they were between (2.34 ev - 2.61 ev) and It was found simpel change in Energy gap when the doping by Copper they were between (2.31 ev - 2,51 ev) and Improving Energy gap when the doping by Alminum they were between (2.48 ev - 2.62 ev).The results measure Current - Potential the optical detector there Ideality factor the detector Prepared with tempratuer the constant base and different molar concentrations where the value increases with molar concentrations decreases, and the better value they were limited 1.7 when concentration 0.5% for Impurities Copper , And limited 1.8 for Impurities Alminum when concentration 0.5%.The result measure Responsive spectral the detector Manufacture the work with in Spectral region (400 - 850 nm) , And found two value the detector (CdO/ Si) the doping and undoping , The first located when wevelength (550 nm ), which return to the detector CdO , The second when wevelength (800 nm ), which return to the detector Silicon. It was found the value Specifc Detectvity the showed the better value they were the detector CdO : Al/ Si the doping concentration 5% it was about 6*1011(HZ1/2.W - 1.cm) at the Wavelength (500nm) and 7*1011(HZ1/2.W - 1.cm) at the Wavelength (700nm).I have explained the results Responsive spectral for white light that the detector has liner properties and this properties improving after at dopend.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: العربية
الجامعة: جامعة بغداد
الدرجة: ماجستير
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: سعاد غفوري خليل العاني رائد عبد الوهاب اسماعيل
اسم المؤلف: رفل صالح ساجت فياض

المقاطع العرضية لتفاعلات القنص والجسيمات المشحونة لانتاج نظائر اليود الطبي المشع Capture and Charged Particles Reactions Cross Sections for Production of Iodine Medical Radioisotopes

المستخلص: تعددت الوسائل التي يحاول الاطباء من خلالها الكشف المبكر عن الامراض السرطانية ومن ثم السيطرة عليها قبل ان تتفاقم ويصعب علاجها. ان اخر ما توصل اليه الطب الحديث للحد من انتشار هذه الامراض هو استخدام نظائر المواد المشعة في علاج بعض الامراض وتشخيص البعض الاخر حيث يلعب النشاط الاشعاعي المنبعث من انحلال النظائر المشعة مثل انبعاث الكترونات اوجر والبوزترونات واشعة كاما دورا هاما في التطبيقات الطبية التشخيصية والعلاجية, ان الانوية المشعة ذات الاعمار النصفية الصغيرة (بضع ساعات) تكون ملائمة للحالات التشخيصة وهذا مايسمى التصوير بواسطة الانبعاث البوزتروني (PET) او بقياس طاقة فوتون كاما المنفرد (SPET) حيث تعطي هذه التقنيات صور ثلاثية الابعاد للعضو المراد فحصه, اما الحالات العلاجية فان الاشعة المؤينة المنطلقة لمسافات قصيرة تكون ملائمة لاختراق الانسجة وتغير تركيب الحمض النووي للانسجة المصابة. هذه النظائر يتم انتاجها بواسطة معجلات او مفاعلات نووية خاصة لهذه الاغراض ومن ثم يتم التاكد من نقائها من الشوائب النووية التي تظهر في عملية الانتاج قبل اعطائها للمريض . مما تقدم تم اختيار نظائر اليود المشع (I; A= 119→126, 128, 130, 131) في هذه الدراسة لان معظم نظائره ذات اعمار نصفية ملائمة للحالات العلاجية والتشخيصية. ان الطرق الرئيسية لانتاج اليود هو باستخدام الاهداف , , والتي تضمنت 38 تفاعل مباشر و9 تفاعلات غير مباشرة. وقد تم حساب المقاطع العرضية لتفاعلات (p,γ)و (p,α)و(p,xn) و(d,xn) و(α,xn) لانتاج نظائر اليود المشع حيث تم تقييمها في العمل الحالي اعتمادا على القيم العملية المتوفرة في مكتبة (EXFOR) التابعة لوكالة الطاقة الذرية الدولية (IAEA) حيث احتوت مكتبة (EXFOR) على البيانات العملية للمقاطع العرضية المقاسة لعدة سنوات سابقة ولعدة باحثين حتى الوقت الحالي. ان افضل التفاعلات لانتاج I - 123 هما و, وكذلك افضل التفاعلات لانتاج I - 124 هما و, ولانتاج I - 125 فان افضل تفاعل هو كون هذه التفاعلات تتمتع بانتاج عالي وشوائب قليلة ضمن مدى طاقي قليل. وان افضل تفاعل لانتاج I - 131 هو التفاعل غير المباشر لاهميته باستخدامه في (SPET) لغرض تصوير الغدة الدرقية وكذلك لعلاج سرطان الغدة الدرقية. لقد تم تحليل مديات الطاقة الكاملة لكل تفاعل وقد تم اعادة حساب المقاطع العرضية بفترات صغيرة لطاقة البروتون او الديتريون او جسيمة الفا الساقط بلغت (0.01MeV) مع الاخطاء المرافقة لها. وبذالك تم حساب المقاطع العرضية المختارة لانتاج نظائر اليود المشع وايجاد معادلات الملائمة من نوع Polynomials لعدة مراتب n= 4→10 والتي تربط بين تغير المقطع العرضي مع الطاقة والتي يمكن استخدامها للتنبؤ بقيم المقاطع العرضية غير المحسوبة. لقد تم حساب مستوى الشوائب التي تظهر في عمليات انتاج النظائر التي لها اعلى تطبيقات طبية واختيار افضل منطقة ذات مدى طاقة يتم تحديده باستخدام السايكترون للحد من ظهور الشوائب النووية وتم الحصول على توافق جيد بين النتائج النظرية والنتائج العملية المتوفرة. لقد تم حساب قدرة الايقاف على اساس صيغة زكلر من اجل حساب ناتج (yield) كل تفاعل وحساب سمك الهدف. وقد تم حساب قيمة Q وطاقة العتبة وطاقة الربط والمقاطع العرضية لنظائر اليود المختارة. تم بناء البرامج الحسابية Recom.m وStopp.m وStopd.m وStopa.m وYield.m وImpurity.m في العمل الحالي باستخدام Matlab - 8 اضافة لاستخدام برنامج SRIM (2003) لاجراء الحسابات. | There are many ways in which doctors attempt to early detection of cancer and then control it before it worsen and becomes difficult to treat. The latest findings of modern medicine to reduce the spread of these diseases is the use of isotopes of radioactive Iodine in the treatment of some diseases and diagnosis of others where it plays radioactivity emitted from the dissolution of radioactive isotopes, such as the emission of Auger electrons, positrons and gamma rays which play an important role in medical applications of diagnostic and therapeutic. The half - life of radioactive nuclei with a few hours are appropriate for situations diagnostic and this called imaging by Positron Emission Tomography (PET) or Single Photon Emission Tomography (SPET). These techniques give a three - dimensional picture of the organ to be scan, either cases the therapeutic ionizing radiation emitted over short distances are appropriate to penetrate the tissue and change the structure of DNA of the infected tissue. These principals are produced by accelerators or nuclear reactors, especially for this purpose and then be sure of the purity of nuclear impurities that appear in the production process before giving it to the patient. Isotopes of radioactive Iodine (I; A= 119→126, 128, 130, 131) have been selected in the present work. Since they have suitable half - life that could be used for treatment and diagnostic. The main production routes, use , , targets, including 38 direct reactions and 9 indirect reactions. Exciitation functions for proton, deuteron and alpha particles for the reactions (p,xn), (p,α), (p,γ), (d,xn), (α,xn) (n,p) for the production of isotopes of radioactive Iodine have been evaluated using an experimental of energy of incident particles and cross sections published in the International Atomic Energy Agency (IAEA), especially (EXFOR) library which measured cross sections for different authors and for several years prior to the present. The best reactions for the production of Iodine - 123 are the reaction and reactions, while the best reactions for the production of Iodine - 124 are and reactions. For the production of Iodine - 125, the best reaction is , because it possesses less impurities and low energy ranges and higher yields. While the best indirect reaction for the production of Iodine - 131 is for its importance using in (SPET) for imaging of the thyroid gland and as a therapy by thyroid cancer. The analysis of a complete energy range has been done for each interaction. The cross sections are reproduced in fine steps of incident proton or deuteron or alpha particle energy in 0.01MeV intervals with their corresponding error. Therefore, the selected cross section for the production of radioactive Iodine isotopes have been calculated with a polynomials fitting with a degree n=4→10 that could be used for the prediction of un calculated cross sections. Level of impurities that appear in the isotope production processes that which have the highest medical applications have been calculated. The best area of useful energy range has been chosen by using cyclotron to reduce the appearance of nuclear impurities The stopping power according to Zeigler formulae was used in order to obtain the yield for each reaction and to calculate the target thicknes. Q - value, threshold energy and binding energy for selected Iodine isotopes were also calculated. The programmes of Recom.m, Stopp.m, Stopd.m, Stopa.m, Yield.m and Impurity.m, have been built in the present work using Matlab - 8 to calculate the results of the present work, as well as SRIM (2003) program were used
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2014
الموضوع العام: علوم الفيزياء
اسم المشرف: ايمان طارق العلوي
اسم المؤلف: رغد سعدون محمد

تحضير المعقد السيراميكي (Ln2Ba2Zn3 - xMxTiOy) ودراسة بعض خواصه الفيزيائية (Ln=La,Nb) (X=0,1,2,3) (M=Ca,Mg) Preparation of complex ceramic(Ln2Ba2Zn3 - xMxTi3Oy) and study of dielectric properties (Ln=La,Nb) (X=0,1,2,3) (M=Ca,Mg) (y=14,16)

المستخلص: تم في هذا البحث تحضير المركبات السيراميكية Ln2Ba2Zn3 - xMxTi3Oy حيث (Ln=La,Nb) و(X=0,1,2,3) و(M=Ca,Mg) بطريقة التفاعل الصلب باستخدام المواد الاولية (La2O3,Nb2O5, BaCO3,ZnO,CaCO3,MgO,TiO2). تم وزن المواد وخلطها باضافة الكحول وتجفيفها بعدها تم حرقها حرقة اولية بدرجة حرارة (950oC) لمدة (18h) بعد ذلك تم طحنها وخلطها مرة ثانية واعادة حرقها بدرجة حرارة (1000oC) لمدة (12h) بعد ذلك تم طحنها وكبسها باضافة (PVA) كمادة رابطة على شكل اقراص ذات قطر (1cm) حيث تم تلبيد هذه الاقراص بخمس درجات حرارة تلبيد (1050,1100,1150,1200,1250)oC ولكل درجة حرارة تم التلبيد بخمس ازمان (2,4,6,8,10)hعدا درجة حرارة تلبيد (1250oC) حيث تم التلبيد بثلاث ازمان (2,4,6)h. بعد انتهاء عملية التلبيد تم اجراء فحص حيود الاشعة السينية للمركب (La2Ba2Zn2Ca1Ti3O14) والمحضر بدرجتي حرارة تلبيد وكذلك لمركبات (La2Ba2Zn3 - xCxTi3O14)لقيم (X=0,1,2,3).وتم قياس الكثافة الظاهرية والمسامية الظاهرية لكافة النماذج المحضرة باستخدام طريقة ارخميدس ثم تم دراسة التركيب المجهري لها باستعمال المجهر الضوئي بعد اجراء عملية الصقل لسطوح هذه المواد. وكذلك تم دراسة الخواص الكهربائية لهذه المركبات والمتضمنة كل من قياس ثابت العزل الكهربائي ومعامل الفقد العزلي وظل زاوية الفقدان والتوصيلية الكهربائية المتناوبة ومخططات كول - كول وكذلك المقاومية الكهربائية والتوصيلية الكهربائية المستمرة وقياس متانة العزل. واظهرت نتائج حيود الاشعة السينية ان هذه المركبات لها تركيب من نوع بيروفسكايت المكعب وان مركبات( La2Ba2Zn3 - xCaxTi3O14) تحوي ايضا الطور (Ba2Ti9O20) عدا المركب( ( La2Ba2Zn2CaTi3O14 فله طور واحد هو المكعبي. ومن خلال الصور المجهرية الماخوذة لسطوح النماذج تبين ان الحبيبات تبدا بالتقارب من بعضها البعض على حساب المناطق غير المتفاعلة والفجوات وان المقاس الحبيبي يزداد مع زيادة درجة حرارة وزمن التلبيد .بينت النتائج ان الكثافة الظاهرية وثابت العزل والمقاومية الكهربائية ومتانة العزل تزداد مع زيادة كل من درجة حرارة وزمن التلبيد لكافة المركبات وان جميعالنماذج قد انصهرت بشكل تام عند درجة حرارة تلبيد (1250oC) عدا(La2Ba2Zn2CaTi3O14 ) و( Nb2Ba2ZnCa2Ti3O16 ) و( Nb2Ba2Zn3Ti3O16 ) التي انصهرت بدرجة حرارة تلبيد (1300oC). وان كل من المسامية الظاهرية ومعامل الفقد العزلي وظل زاوية الفقدان والتوصيلية الكهربائية المتناوبة والمستمرة وزمن الاسترخاء انخفضت قيمها مع زيادة درجة حرارة وزمن التلبيد. وبشكل عام فان اعلى قيمة لثابت العزل والمقاومية واقل قيمة لظل زاوية الفقدان والفقد العزلي والتوصيلية الكهربائية المتناوبة والمستمرة وزمن الاسترخاء (τ1) واعلى قيمة لمتانة العزل لمركبات( La2Ba2Zn3 - xCaxTi3O14 )تكون عند (X=1) وكذلك فان هذه النسبة لهما اعلى استقرارية لثابت العزل مع الحرارة ,بينما لمركبات(Nb2Ba2Zn3 - xCaxTi3O14)نجد ان اعلى قيمة لثابت العزل والمقاومية الكهربائية واقل قيمة لظل زاوية الفقدان والفقد العزلي والتوصيلية الكهربائية المتناوبة والمستمرة وزمن الاسترخاء واعلى قيمة لانهيار العزل تكون عند (X=2). واقل توصيلية كهربائية مستمرة واعلى قيمة لانهيار العزل تكون عند (X=0) واقل قيمة لظل زاوية الفقدان بشكل عام تكون عند(X=3) واقل قيمة للتوصيلية الكهربائية المتناوبة ومعامل الفقد وزمن الاسترخاء تكون عند (X=1). ولمركبات( Nb2Ba2Zn3 - xMgxTi3O16 )نجد ان اعلى قيمة لثابت العزل تكون عند (X=0) واعلى قيمة للمقاومية واقل قيمة للتوصيلية المستمرة واعلى قيمة لانهيار العزل تكون عند (X=1), واقل قيمة لظل زاوية الفقدان ومعامل الفقد العزلي والتوصيلية الكهربائية المتناوبة وزمن الاسترخاء تكون عند (X=3). وكذلك بينت نتائج القياسات الكهربائية ان كل من ثابت العزل الكهربائي وظل زاوية الفقدان ومعامل الفقد العزلي تقل مع زيادة التردد وتبدا بالاستقرار بعد تردد (~10KHz) وان التوصيلية الكهربائية المتناوبة تزداد مع زيادة التردد. ومن خلال نتائج قياس تاثير درجة الحرارة ضمن المدى (30 - 200oC) على الخواص الكهربائية المقاسة عند تردد (100KHz) تبين ان ثابت العزل يكون شبة مستقر مع زيادة درجة الحرارة وان ظل زاوية الفقدان ومعامل الفقد العزلي والتوصيلية المتناوبة تزداد مع زيادة درجة الحرارة للنماذج المقاسة. وبينت نتائج مخططات كول - كول ان جميع العينات المقاسة لا تخضع لنموذج ديباي للاسترخاء العزلي , وان هناك توزيع لزمن الاسترخاء من خلال وجود منطقتي استرخاء الاولى عند الترددات العالية والثانية عند الترددات الواطئة, وان الاستقطابية بشكل عام للمنطقة الاولى تكون اكبر من المنطقة الثانية, وان زمن الاسترخاء للمنطقة الاولى يكون اقل من المنطقة الثانية. | In present search it has been preparing a ceramic compounds Ln2Ba2Zn3 - xMxTi3Oy where (Ln=La,Nb) , (X=0,1,2,3) and ( M=Ca,Mg) were prepared by using solid state reaction method by using start materials (La2O3, Nb2O5, BaCO3,ZnO,MgO,TiO2), after the end of weight and wet mixing and drying process the mixtures were calsinted at ( 9500C) for (18h) after that the mixtures were crashing and mixing again then calsinted again at (1000 0C) for (1 cm) diameter with addition of (PVA) as a binder , then, these pellets were sintered at fire sintering temperatures (1050,1100,1150,1200,1250) 0C for fire sintering time (2,4,6,8,10) h except sintering temperature (1250 0C)were sintered at three sintering time (2,4,6)h. After the sintering process end, that it has been affirmating of the kind and accuracy of crystal structure for the compound La2 Ba2 Zn2 Ti3 O14, which has been sintered at tow temperatures, and the compounds Ln2 Ba2 Zn3 - x Cax Ti3 O14, where ( x = 0,1,2,3), by using the X - ray diffraction technique. It has been measuring the apparent density and apparent porosity for all prepared samples by using archamids method. After the eaching process, the microstructure of samples was studied by using photomicroscope. It has been studying the electrical properties for these compounds, that the electrical properties contained the measurement of each of dielectric constant, dielectric loss coefficient, tangent loss, alternating electrical conductivity cole - cole diagrams and also each of electrical resistivity and direct electrical conductivity and dielectric strength. The results of X - ray diffraction showed that compounds has a cubic peroveskait structure and the compounds La2 Ba2 Zn2 Ti3 O14 including Ba2Ti9O20 phase, except La2 Ba2 Zn2Ca Ti3 O14 has pure cubic phase, through microscopic images captured from samples surfaces it showed that grains start in convergence with each other up on the interest of unreactive areas and gaps,and grains size increasing with temperature and time of the sintering. The results have been showed that the value of each of apparent density, dielectric constant, dielectric resistivity and dielectric strength were increased with temperature and time of sintering increase, for the whole compounds and all the samples were compeletly melted at sintering temperature (1250 0C) except La2 Ba2 Zn2 CaTi3 O14, Nb2 Ba2 ZnCa2 Ti3 O16 and Nb2Ba2 Zn3 Ti3 O16, were melted at sintering temperature of (1300 0C). also results showed that the apparent porosity, dielectric loss coefficient, tangent loss, alternating and direct electrical conductivity and relaxation time were decreased their valus with the increase of the temperature and time of sintering. Generally, the heights value of dielectric constant, resistivity and the lowest value of tangent loss, dielectric loss coefficient alternating ,direct electrical conductivity and relaxation time (t1) and highest value of dielectric strength for compounds La2Ba2Zn3 - xCaxTi3O14 being at (x =1) and also this ratio have highest stability for dielectric constant with temperature ( ) while for compounds Nb2 Ba2 Zn3 - xCax Ti3 O14 we found that maximum value of dielectric constant, resistivity and lowest value of tangent loss, loss coefficient, alternating and direct conductivity and relaxation time and maximum value of dielectric strength being at (x=2). For the compounds La2Ba2Zn3 - xMgxTi3O14 we found that the maximum value of dielectric constant ( at higher sintering temperature ) (T >1150 0C) being at (x=3) and the highest value of resistivity and lowest value of alternating and direct conductivity and higher value of dielectric strength being at (x=0) , Generally lowest value for tangent loss being at (x=3), and the lowest value of alternating conductivity, loss coefficient and relaxation time at (x=1). For compounds Nb2Ba2Zn3 - xMgxTi3O16,we found that highest value of dielectric constant being at (x=0) and highest value for resistivity and lowest value of direct conductivity and highest value of dielectric strength being at (x=1) , and lowest value of tangent loss , loss coefficient , alternating conductivity and relaxation time at (x=3). Also, results of electrical measurements showed that each of dielectric constant, tangent loss , loss coefficient were decreasing with frequency increasing and start to stable after frequency ( 10 kHz), and the alternating conductivity increases with the frequency increases.Through the results of temperature effect measurement within the range (30 - 200 0C) up on the electrical properties at frequency (100 kHz) , the results showed that the dielectric constant being semi - stable with temperature increasing and the tangent loss, loss coefficient and alternating conductivity increases with temperature increase for the measured samples.cole - cole diagrams results showed that all measured samples didn’t submit to Debye model of relaxation and there is a distribution for the relaxation time through the presence of two areas ;first relaxation at high frequencies and the second at low frequencies and polarization coefficient in general at the first area being higher than second area and relaxation time at first area being lower than second area .
الصفحات الاولى:
الكلمات الدلالية:
  • المعقد السيراميكي (Ln2Ba2Zn3 - xMxTi3Oy) وخواصه العزلية
مكان الجامعة: بغداد
اللغة: العربية
الدرجة: دكتوراه
السنة: 2006
الموضوع العام: علوم الفيزياء
اسم المشرف: خالد طه رسول كاظم حسن الموسوي
اسم المؤلف: رعد سعدون صبري

الخصائص الفيزيائية لاغشية اوكسيد الخارصين المشوبة تشويبا مشتركا بالبورون والالمنيوم Physical Properties of Aluminum and Boron co - doped Zinc Oxide Thin Films

المستخلص: في هذا البحث تم تحضير اغشية اوكسيد الخارصين النقي ZnO والمشوبة تشويبا مشتركا بالبورون والالمنيوم ( AZB) بنسب تشويب (2, 4, 6, 8 %)، اي [ZnO : (B 1%+Al 1%), ZnO : (B 2%+ Al 2%), ZnO : (B 3%,Al 3%), ZnO : (B 4%,Al4%)]. اذ تم تحضير الاغشية بطريقة التحلل الكيميائي الحراري بدرجة حرارة القاعدة مقدارها(450 ±10 oC) وسمك (150±5 nm) على قواعد زجاجية وسليكون مسامي من النوعين (n, p) بمقاومية مقدارها(0.05 - 0.1 Ω.cm) واتجاه بلوري (111). تم تصنيع مفارق هجينة من انواع : ( ((ZnO, AZB)/p - PS/Si, (ZnO, AZB)/n - PS/Si ، وتم تحضير طبقة السليكون المسامي بطريقة التنميش الكهروكيميائية والكهروكيميائي تحت تاثير ضوء الهالوجين على قواعد السليكون للنوعين (n, p) بكثافة تيار مقدارها (30 mA) وزمن مقداره (30 minutes) . تم دراسة طبوغرافية سطح الاغشية وللسليكون المسامي باستعمال المجهر الالكتروني الماسح (SEM)، مجهر نفاذية الالكترونات (TEM) ومجهر القوة الذري (AFM) فتبين ان التركيب السطحي للاغشية المرسبة هو تركيب نانوي يتناقص فيه الحجم الحبيبي مع زيادة نسب التشويب المشترك اذ بلغت قيمة اصغر حجم حبيبي 7.5 nm))، وان خشونة السطح تزداد مع زيادة التشويب المشترك وتتغير من(1.34 - 6.15 nm) ومن (6.4 - 12.12)للاغشية المرسبة على الزجاج والسليكون المسامي على التوالي، واظهر جهاز حيود الاشعة السينية (XRD ) ان اغشيية ZnO المحضرة النقية والمشوبة ذات تركيب متعدد التبلور ومن النوع السداسي المتراص (hexagonal wurtzite). تم دراسة الخصائص البصرية للاغشية المحضرة بوساطة قياس طيف النفاذية والامتصاصية عند درجة حرارة الغرفة لمدى طول موجي يتراوح من (300 - 1100 nm) تبين ان النفاذية البصرية للاغشية النقية (87 %) وانها تتناقص مع زيادة نسب التشويب، وظهر ان فجوة الطاقة البصرية تزداد بزيادة نسب التشويب حيث بلغت قيمة فجوة الطاقة البصرية للغشاء النقي (3.22 eV) وتصل الى (3.31 eV) عند التشويب بنسبة (8%). اظهرت القياسات الكهربائية ان الاغشية النقية والمشوبة من النوع السالب (n - type)، وتركيز حاملات الشحنة يزداد مع زيادة نسب التشويب المشترك. لاغشية المحضرة المرسبة على الزجاج والسليكون المسامي للنوعين (n, p) تم استخدامها في قياس التحسسية للغازين (NH3, NO2)، بدرجة حرارة الغرفة وبتراكيز (50, 100, 150, 200 ppm). اظهرت النتائج ان المقاومة الكهربائية للاغشية تتناقص مع زيادة التشويب بالنسبة للغاز (NH3) بسبب تفاعل الاختزال، لكنها تزداد مع زيادة التشويب بالنسبة للغاز (NO2) بسبب تفاعل الاكسدة. بينت النتائج ان تحسسية الاغشية المرسبة على السليكون المسامي تكون اكبر من تحسسية الاغشية المرسبة على الزجاج، وتكون تحسسية الاغشية المرسبة على السليكون المسامي نوع (n) اكبر منها في حالة السليكون المسامي لنوع (p). وبينت الدراسة ان زيادة تراكيز الغازات تؤدي الى زيادة التحسسية. | In this research, pure ZnO and (aluminum and boron) co - doped ZnO(AZB)thin films were deposited with various doping concentration(2, 4, 6 and 8 %),[ZnO : (B 1%+Al 1%), ZnO : (B 2%+ Al 2%), ZnO : (B 3%,Al 3%), ZnO : (B 4%,Al4%)]. The thin films have been prepared by Spray Pyrolysis's method at (450 ±10 oC) substrate temperature with (150±5 nm) thickness on glass and porous silicon (n & p) types with resistivity (ρ= 0.05 - 0.1 Ω.cm) and (111) crystalline orientation. Heterojunctions of the types, such as : (( ZnO, AZB)/p - PS/Si, (ZnO, AZB)/n - PS/Si were also prepared. The porous silicon layer was prepared by the electrochemical and photo electrochemical etching under the effect of halogen light on silicon substrates for (n & p) types with current density (30 mA) for (30 minutes). The surface topography of the films and the porous silicon are studied by using the Scanning Electron Microscopy (SEM), Transmission electron microscopy (TEM) and the Atomic Force Microscopy (AFM). The study shows that the surface structure of the deposited films is nano structural and the value of the grain size decreases with the increase of co - doping where the minimum value of grain size was (7.6 nm). It was found that the surface roughness increased with doping from (1.34 to 6.15 nm) and (6.4 to 12.12) for a films deposited on glass and porous silicon substrate respectively, the x - rays diffraction showed the prepared doped and undoped ZnO thin films were of polycrystalline structural of(hexagonal wurtzite). The optical properties of the prepared thin films have been studied by measured the transmittance and absorbance spectrum at room temperature for the wavelength range (300 - 1100 nm), the transmittance was (87 %) for the undoped ZnO, the transmittance decreased with the co - doped increased. The value of the optical energy gap increased with the co - doped increase, the optical energy gap of the undoped film was found to be (3.22 eV) and increased to (3.31 eV) after doping with (8%) rate. The electrical measurements proves that doped and undoped thin films were n - type, and the carrier charge concentrations increased with the increase of co - doped rate. The prepared thin films deposited on glass and porous silicon (n & p) types have been used to the sensitivity measurements for (NH3, NO2) gasses at room temperature for the (50, 100, 150, 200 ppm) concentrations. The results shows that the electrical resistance for the thin films decrease with the increase of co - doped concentrations for (NH3) gas due to the reducing interaction, but it increases with the increase of co - doped concentration for (NO2) gas due to the oxidation interaction. The results show that the sensitivity of the thin films deposited on porous silicon substrates is higher than the sensitivity of the thin films deposited on glass substrates. The sensitivity of n - type porous silicon is higher than p - type porous silicon and glass substrate. The study shows that the increase of gases concentrations leads to increase of sensitivity.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: دكتوراه
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: انوار حسين علي الفؤادي
اسم المؤلف: رشيد هاشم جبار

دراسة الخواص البصرية والكهربائية لمتراكبات PMMA/ اكسيد المعادن Study the Optical and Electrical Properties of PMMA/Metal Oxide Composites

المستخلص: يهدف هذا البحث الى تحضير متراكبات ثلاثية هجينة من PMMA مقواة بجسيمات TiO2 - Al2O3 وZrO2 بتقنية الصب .تم استخدام كسور وزنية (84 - 92) wt % من بولي ميثيل ميثا اكريلك ونسبة ثابتة % (4) من تيتانيا مع نسب وزنية تتراوح بين wt % (4 - 12) للالومينا والزركونيوم. تم دراسة المواصفات التركيبية من خلال حيود الاشعة السينية ومجهر القوة الذرية. بينت فحوصات صور مجهر القوة الذرية تجانس في البناء البلوري. اما الخواص العزلية فقد فحصت من خلال قياس ثابت العزل عند مدى تردد (102 - 106) Hz وبينت النتائج ظهور تاثير طفيف عند اضافة الالومينا للمتراكب الهجيني (PMMA - TiO2 - Al2O3) مقارنة بمضاف الزركونيوم للمتراكب الهجيني (PMMA - TiO2 - ZrO2) حيث قيم ثابت العزل تزداد مع زيادة التركيز (3.408500 - 10.69851). في حين يتناقص عامل الفقد بزيادة التردد للمتراكبات (PMMA - TiO2 - Al2O3)و(PMMA - TiO2 - ZrO2) . قيست التوصيلية الكهربائية المستمرة لمدى درجات حرارية تتراوح بين ( 313 - 373 )K ولوحظت زيادة في القيم التوصيلية بزيادة التركيز ودرجة الحرارة (5.5E - 10 - 8.52E - 10) (Ω.m) - 1 في حالة الزركونيوم المضاف للمتراكب الهجيني. تم حساب الثوابت البصرية للعينات المحضرة كدالة للطول الموجي وذلك باستخدام مطياف بمدى nm( - 1100200). حيث تم حساب معامل الامتصاص، معامل الخمود، معامل الانكسار وفجوة الطاقة البصرية, ومن حساب النتائج نلاحظ ان قيم معامل الامتصاص ومعامل الخمود ومعامل الانكسار لل(PMMA - TiO2 - Al2O3) اعلى من (PMMA - TiO2 - ZrO2) كدالة للطول الموجي، نلاحظ ايضا، انخفاض في قيم فجوة الطاقة البصرية المسموحة eV (2.90 - 2.50) في متراكبات الالومينا بينما من (2.90 - 2.58) eV للزركونيوم. وكذالك فجوة الطاقة البصرية الممنوعة (2.85 - 2.48) eV الكترون فولت للالومينا بينما eV (2.85 - 2.52) للزركونوم . | This study aims to synthesize ternary hybrid composites PMMA polymer matrix with TiO2, Al2O3 and ZrO2 as additives using casting technique. the weight fractions of matrix with range (84 - 92) wt %, fixed percentage (4) % of TiO2 and range of weight fractions with range (4 - 12) wt % of Al2O3 and ZrO2 were used as started materials. Characterization properties were examined through XRD and AFM. Obtained micrograph and XRD revealed homogeneity structure for Al2O3 filler. Dielectric properties such as dielectric constant were carried for range (102 - 106) Hz frequency .The addition of Alumina filler exibits slightly effect on dielectric constant values for prepared ternary hybrid composite (PMMA - TiO2 - Al2O3 ) compared with ZrO2 for ternary hybrid composite (PMMA - TiO2 - ZrO2) where dielectric constant increases as concentration increases (3.408500 - 10.69851) . Dissipation factor decreases with increasing frequency in composite (PMMA - TiO2 - Al2O3) and (PMMA - TiO2 - ZrO2). DC electrical conductivity was conducted in temperature range ( 313 - 373 )K. Markedly increasing for the DC electrical conductivity of Zirconia filler with respect to additional concentration (5.5E - 10 - 8.52E - 10) (Ω.m) - 1 .Otherwise DC electrical conductivity increases versus applied temperature for both prepared composites. Optical constants (extinction coefficient, absorption coefficient, and Index of refraction), optical energy gap were obtained for prepared Specimens as function of wavelength using spectrometer at range (200 - 1100)nm. It was noticed that the values of extinction coefficient ,coefficient of absorption , and refractive index for (PMMA - TiO2 - Al2O3) are higher from that of (PMMA - TiO2 - ZrO2) as wavelength, also, more decreasing in allowed optical energy gap values from (2.90 - 2.50 eV) for Al2O3 filler and from (2.90 - 2.58 eV) for ZrO2 as additive. Also forbidden optical energy gap decreases in case Al2O3 from(2.85 - 2.48) eV while from (2.85 - 2.52) for ZrO2 as additive.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: رغد صبحي الخفاجي
اسم المؤلف: رسل طه حسين

دراسة التركيب المتهيج للنوى زوجية - زوجية ذات العدد الذري Z= 50, 48, 46 في المستوى المتهيج الاول Study of Excited Structure for Even - Even Nuclides of Z = 50, 48, 46 in The First Excited State

المستخلص: درست الخواص الكهرومغناطيسية للنظائر زوجية - زوجية للنوى 48Cd , 50Sn و46Pd الغنية بالنيوترونات من خلال قوى الانتقال لرباعي القطب الكهربائي |M(E2)|2 W.u ↓ واحتمالية الانتقال المختزل B(E2)W.u ↓ لانتقال اشعة كاما من المستوى المتهيج الاول الى المستوى الارضي. حيث تم حساب قوى الانتقال لرباعي القطب الكهربائي |M(E2)|2 W.u ↓ بالاستعانة بمعدل العمر للمستوى المتهيج الاول والشدة النسبية لاشعة كاما المنبعثة من ذلك المستوى, بينما قيم احتمالية الانتقال المختزل B(E2)W.u ↓ استخرجت من خلال عمر النصف للمستوى المتهيج الاول المصحح لمعامل التحول الداخلي.وللحصول على قيمة دقيقة لانتقال رباعي القطب الكهربائي ↓ E2, تم حساب ورسم القيم المتبناة لكل من |M(E2)|2 W.u ↓ وB(E2)W.u ↓ كدالة لعدد النيوترونات.في هذا البحث, تم تحويل القيم المتبناة لانتقال ↓E2 الى قيم احتمالية الانتقال المختزل B(E2) ↑ e2b2 والتي افادتنا في دراسة تركيب النوى من حيث الاختلاف في الشكل لان عامل التشوه β تم استخراجه من B(E2) ↑ e2b2, كما ان دراسة تاثير عدد النيوترونات على سلوك كل من B(E2) ↑ e2b2 وβ في المتسلسلات الايزوتونية لنوى 48Cd , 50Sn و46Pd يعطي معلومات جيدة حول التشوه في النوى.تركزت دراستنا على ثلاث انواع مختلفة من النوى, الاول بعدد ذري سحري50 , والثاني بعدد ذري شبه سحري 48, والثالث بعدد ذري بين القشرات المغلقة 46.في نهاية العمل الحالي تم عمل مقارنة جيدة للحسابات الحالية لقيم احتمالية الانتقال المختزل B(E2) ↑ e2b2 وعامل التشوه β مع معظم القيم العملية والنظرية الحديثة. | Electromagnetic properties for even - even nuclides in neutron - rich nuclei such 50Sn, 48Cd and 46Pd have been studied through the electric quadruple transition strength |M(E2)|2 W.u ↓ and the reduced transition probability B(E2)W.u ↓for γ0 - transition from first excited state to the ground state. The electric quadruple transition strength |M(E2)|2 W.u ↓ is calculated by using life - time for excited state with the intensity of γ0 - transition, while B(E2)W.u ↓ is extracted from half - life time to state corrected for internal conversion coefficient. To obtain precise value for the transition of E2↓, the adopted value for |M(E2)|2 W.u ↓ and B(E2)W.u ↓ was calculated and plotted as a function for neutron number. In present work, the adopted values for the transition of E2↓ are converted to B(E2)exp ↑ e2b2 which helped us to study the structure for nucleus, such as the variation in shape, because the deformation parameter β is extracted from B(E2) ↑ e2b2 and the study for behavior of each of B(E2) ↑ e2b2 and β versus neutron number in isotonic chains to 50Sn, 48Cd and 46Pd gives good information about the deformation in nuclei. Our study focused on the three different types of nuclei, the first with atomic magic number 50, the second with semi - magic atomic number 48 and the third nucleus with atomic number between closed shells 46. At the end of the present work, the good comparisons for the present calculation to the values of the B(E2) ↑ e2b2 and β with most recent values of experimental and theoretical was done.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
الموضوع الدقيق: الفيزياء
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: فاطمة عبد الامير جاسم
اسم المؤلف: رسل سعد هادي

تصميم مراة ايونية تعمل كمصحح للزيوغ باستخدام طريقة القيم الحدودية DESIGN OF ION MIRROR AS AN ABERRATION CORRECTOR USING BOUNDARY VALUES METHOD

الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
الموضوع الدقيق: الفيزياء
السنة: 2007
الموضوع العام: علوم الفيزياء
اسم المؤلف: محمد سلام مزاحم العبيدي

تصحيح الزيغ بسبب عدم التراصف في العدسات الكهروسكونية THE ABERRATION CORRECTION DUE TO MISALIGNMENT IN ELECTROSTATIC LENSES

المستخلص: اجري بحث حاسوبي في مجال بصريات الجسيمات المشحونة. يهتم البحث بتصميم منظومات عدسات كهروسكونية بوجود وعدم وجود تاثير عدم التراصف تعمل تحت ظروف تكبير مختلفة.ان توزيع مجال الجهد لعدسه احادية الجهد وعدسة مغمورة كهروسكونية تم تمثيله بدوال تحليلية. تم حل معادلة الاشعة المحورية للمجالات المقترحة لايجاد مسار الجسيمات المشحونة المارة في كل عدسة. ومن توزيع الجهد المحوري ومشتقتيه الاولى والثانية .تم حساب الخواص البصرية كالبعد البؤري والزيغين الكروي واللوني. كذلك تم ايجاد شكل اقطاب كل عدسة كهروسكونية ببعدين وبثلاثة ابعاد. ويعتمد الزيوغ في العدسات الكهروسكونية اعتمادا كبيرا على تراصف الاقطاب، وقد وجد انه عامل مهم يؤثر على الشكل الهندسي لمنظومة العدسة الكهروسكونية. ان نتائج هذه الدراسة لا تبرهن نظريا" امكانية تصميم منظومات عدسة كهروسكونية بزيوغ واطئة فحسب بل تبين امكانية تصنيع مثل هذه العدسات عمليا". | A computational investigation has been carried out in the field of charged - particle optics. The work is concerned with the design of electrostatic lenses with and without misalignment effect operated under different magnification conditions. The potential field distributions of einzel and immersion electrostatic lenses have been represented by analytic functions. The paraxial ray equation has been solved for the proposed fields to determine the trajectory of the charged particles traversing each lens. From the axial potential distribution and its first and second derivatives, the optical properties such as the focal length and spherical and chromatic aberrations have been compute. The electrode shape of each electrostatic lens has been determined in the two - and three - dimensions. The aberration of the electrostatic lens is highly dependent on the alignment of the electrodes and it has been found to be an important parameter affecting the geometry of the electrostatic lens system. The results of this investigation not only prove in theory the possibility of designing electrostatic lens systems with low aberration but also show the possibility of constructing such lenses in practice
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
الموضوع الدقيق: الفيزياء
السنة: 2006
الموضوع العام: علوم الفيزياء
اسم المشرف: احمد كمال احمد
اسم المؤلف: رؤى تحسين عبد الله الصميدعي

دراسة النشاط الاشعاعي لنماذج من التربة والماء في بغداد وكربلاء والبصرة Determination of the Radioactivity in Soil and Water in Baghdad, Karbala and Basrah Samples

المستخلص: يتضمن البحث دراسة عملية لتحديد تراكيز اليورانيوم وغاز الرادون في التربة والماء لمناطق من بغداد وكربلاء والبصرة وللتعرف على مدى تلوث تلك المناطق بالمواد المشعة بعد احداث الحرب على العراق عام 2003 .تضمن الجزء الاول ايجاد تراكيز اليورانيوم في التربة والماء باستخدام كاشف الاثر (CR - 39) حيث استخدم التفاعل U - 235(n,f)U - 236 كمصدر لشظايا الانشطار النووي وذلك بقصف نواة اليورانيوم U - 235 بالنيوترونات الحرارية من المصدر النيوتروني (Am - Be) بفيض نيوتروني حراري (5 ×103 n cm - 2 s - 1) .تم تحديد التراكيز بالحسابات المعتمدة على المقارنة مع النماذج القياسية، وقد اوضحت النتائج التي حصلنا عليها ان اعلى تركيز لليورانيوم في التربة (2.73 ppm) في منطقة التاجي واعلى تركيز لليورانيوم في الماء (2.12 ppm) في منطقة العشار. تضمن الجزء الثاني ايجاد تراكيز غاز الرادون في التربة والماء باستخدام تقنية عد اثار جسيمات الفا المنبعثة من غاز الرادون فيكاشف الاثر (CR - 39) .وقد اوضحت النتائج التي حصلنا عليها ان اعلى تركيزلغاز الرادون في التربة (666 Bq/m3) في منطقة التاجي واعلى تركيز للرادون في الماء (14 Bq/m3) في منطقة العشار. اوضحت النتائج التي حصلنا عليها بان اعلى تراكيز لليورانيوم والرادون كان في منطقة التاجي ببغداد وفي منطقة العشار بالبصرة بسبب كون تلك المناطق مسرح للعمليات الحربية ضد العراق عام 2003 . | The aim of this project is to measure the uranium and radon gas concentrations in soil and water samples taken from regions situated in Baghdad, Karbala and Basrah, and to limit the level of contamination with radionuclides for these regions during the 2003 war.The first part contains the determination of uranium concentration in soil and water samples using CR - 39 Track detector. The nuclear reaction used a source of nuclear fission fragments is 235 - U (n , f) obtained by the bombardment of U - 235 with thermal neutrons from (Am - Be) source which has flux of (5 ×103 n cm - 2 s - 1). The concentrations values were calculated by a comparison with standard samples which prepared in our laboratory.The results obtained show that the higher concentration of uranium in soil samples was (2.73 ppm) in Al - Tajii region, and the higher concentration for water samples was (2.12 ppm) in Al - Ashaar region.The second part contains the determination of radon concentration in soil and water samples using alpha - emitters registration which emits from radon gas in (CR - 39) track detector.The results show that the higher concentration for radon gas in soil samples was (666 Bq/m3) in Al - Tajii region and in water samples was (14 Bq/m3) in Al - Ashaar region.The results show the maximum values of uranium and radon concentrations were in the (Al - Tajii and Al - Ashaar) regions, because these regions were a field of military operations during the 2003 war
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2006
الموضوع العام: علوم الفيزياء
اسم المؤلف: مصطفى عرب بداي علي البيضاني

نظام اخفاء البيانات ذو معدل اخفاء عالي باستخدام تحويل الافين وطريقة البت الاقل اهمية High Hiding Rate Image Steganography System Based On Affine Transform and LSB Method

المستخلص: The spying and intrusion operation had been widely spread to steal the information especially with the development of computer networks (like, Internet). To prevent this danger the development of a new technology called “digital information hiding” was developed in such a way that the intruder cannot notice the existence of secret information in the media.In this project an image steganograph system is introduced. The proposed system is based on using the affine transform to represent the blocks of the secret image in terms of the blocks of the cover image. Then, the least significant bits (LSB) insertion method is utilized to hide the quantized affine transform coefficients of the secret image in the cover image. Also in this research some block indexing methods are utilized to improve (i.e, speed up) the involved trials of affine mappings. Three systems (they are traditional IFS, IFS with symmetry predictions, and IFS with symmetry prediction and blocks indexing) have been established. They used to manage the way of selecting the suitable domain (cover) to represent the range (secret) block. The domain search operation will not need to make all isometric - block tests on each domain block. The best domain isometric state is assessed using the introduced isometric predictor; which is based on the moment status of the matched block. This will significantly reduce the matching time because only one match, instead of eight, will be tested to evaluate the IFS - similarity between any range and domain block. Also, a block indexing method is introduced to filter the domain blocks, and filter - in only those domain blocks that have similar block index with that of the mapped range block to be tested using IFS - matching.Some of the well known fidelity measures (like, MSE and PSNR) have been used to asses the quality of the reconstructed image. The conducted test results indicated that the proposed improvements have reduced the required hiding time down to 6.81 second (around 80 times in comparison with the traditional scheme) without making significant degradation in image quality
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2008
الموضوع العام: علوم الفيزياء
اسم المشرف: لؤي ادور جورج اياد عبد العزيز العاني
اسم المؤلف: محمد خليل خلاف سهيل القيسي

تاثير نسب ومعاملات الحزم على دقة تصنيف صور الاقمار الصناعية المتعددة الاطياف Effect of Band Ratios and Indices on Classification Accuracy of Multispectral Satellite Images

المستخلص: Multispectral satellite images are holding whole information about the areaunder investigation. Many of digital processing techniques are used to extractmost of the possible information from these images, such these techniques arespectral band ratios, Tasseled Cap transformation and Principle ComponentAnalysis (PCA). These techniques are play good part for features extraction andreducing the number of spectral bands with no loses in information.The research aims to apply classifications on band ratios and image indiceswhich include PCA and Tasseled Cap transformations, of Enhanced ThematicMapper Plus (ETM+) satellite images, and to show how the accuracies of theclassification are differ from the accuracy of classification of the raw ETM+ bandsimages.The results show that the best bands ratios that adopted to represent fiveselected land features are 5/7, 4/5, 2/5, 1/4, and 2/4. Optimum Index Factormethod (OIF) has been adopted on raw bands combinations, and on the bandsratio combinations to select which band combination that contains muchinformation, where the results show that the best combination for raw bands is3 - 4 - 7, and best combination for ratios band is 4/5 - 1/4 - 2/5.Iterative Self Organizing Data Analysis (ISODATA) method has beenadopted as unsupervised classification, and Maximum Likelihood method assupervised classification. The overall accuracies are 87.18%, 89.45%, 89.26%,and 89.52% for raw bands, band ratios, Tasseled Cap, and PCA respectively,which showed that transformation techniques give good spectral enhancementsand feature extraction which are undistinguishable in raw image, and representgood tools to increase the accuracy of classification.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
الموضوع الدقيق: الفيزياء
السنة: 2008
الموضوع العام: علوم الفيزياء
اسم المشرف: اياد عبد العزيز العاني صلاح عبد الحميد صالح
اسم المؤلف: سيف كامل شنين

تحضير اوكسيد القصدير ذو التراكيب النانوية على اوكسيد الالمنيوم المانود بطرق مختلفه Synthesis of SnO2 nanostructure on anodic aluminum oxide by different method

المستخلص: تم تحضير قالب اوكسيد الالمنيوم المانود بعملية الانودة بخطوتين للحصول على افضل ترتيب للمسامات باستخدام حامض الاوكزاليك بشروط تحضير مختلفة مثل درجة حرارة المحلول (10,7و 15 درجة سيليزية) وفولتيات الانودة (30 و40 فولت.(نتائج المجهر الالكتروني الماسح للقالب المحضرعند 30 فولت بينت ان المسامات ذات قطر صغير وترتيب ضعيف. بينما 40 فولت , المسامات ذات قطر اكبر وذات ترتيب عالي. من خلال هذه الدرجات الحرارية الثلاثة المختلفة (10,7و 15 درجة سيليزية). وجد ان (10 درجة سيليزية) هي افضل درجة حرارية لتحضير مسامات ذات ترتيب عالي. اذا درجة الحرارة ازدادت فان قطر المسام سوف يزداد . عامل الوقت مهم جدا في هذه العمليه عندما وقت الانودة يقل فان اوكسيد الالمنيوم المانود اصبح رقيق جدا وهش ويتكسر بسهوله جدا وبالتالي ستكون هناك صعوبة في استخدامه كقالب ترسيب. عندما الوقت يزداد لاكثر من 12 ساعة في الانوده الثانيه فسمك القالب يصبح حوالي 44 مايكرو متر سيعطي افضل شرط لترسيب اوكسيد القصدير. في هذا البحث اربع طرق استخدمت لتحضير اوكسيد القصدير بشكل قضبان نانوية باستخدام قالب اوكسيد الالمنيوم المانود مثل طريقة الصول - جيل ,تقنية التغطيس والفلترة ,التفريغ والتقطير وطريقة التبخير الحراري. جميع نتائج فحوصات الاشعة السينية لكل طرق التحضير تبين ان اوكسيد القصدير هو تركيب متعدد التبلور وذات تبلور متجانس. طرائق تحضير الصول - جيل والتبخير الحراري تبين ان القضبان النانوية لاوكسيد القصدير لها نفس القطر والطول وافضل ترتيب واكثر تجانس . بينما القضبان النانوية لطرائق التحضير الاخرى تختلف في القطر والطول. | Anodic aluminum oxide (AAO) was prepared by anodization process with 2 - step to obtain the best order arrangement of pores using oxalic acid at different preparation conditions such as electrolyte temperature (7, 10 and 15 °C) and anodization voltages (30 and 40 V). SEM results of the template which prepared at 30V showed the pores with small diameter and poor order. While at 40V, the pores with large diameter and high quality order pores. From three different temperatures (7, 10 and 15 °C), it's found that 10°C is the best temperature to prepare high quality order pores. If the temperature increases, the pore's diameter will increase. The time factor is very important in this process; when the anodization time decrease, AAO becomes very thin, brittle and can break very easily. Thus, there will be a difficulty to use as a deposition template. When the time increase more than 12 hr in second anodization, the template thickness's will become 44µm which gives the best condition to deposit SnO2. In this research, four methods used to prepare SnO2 nanorods by using AAO template such as the sol - gel, immerse and filtration technique, vacuum and drop setting and thermal evaporation. The whole results of XRD for all preparation methods showed that SnO2 is polycrystalline and homogeneous crystal. The sol - gel and thermal evaporation methods revealed the SnO2 nanorods have the same rod's diameter, length, best order and highly homogeneous. While the nanorods of other preparation methods are different in diameter and length.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: رعد سعدون صبري
اسم المؤلف: رحمه سعد محمد العبيدي

تحضير ودراسة الخواص الكهربائية والبصرية لاغشية NiO الرقيقة غير المشوبة والمشوبة بالنحاس لتطبيقات متحسس الغاز Preparation and study the electrical and optical properties of undoped and Cu doped NiO thin films for gas sensor applications

المستخلص: في العمل الحالي، تم تحضير اغشية رقيقة جيدة باستخدام تقنية منخفضة التكلفة وهي الرش الكيميائي الحراري, تم قياس الخصائص التركيبة , البصرية والكهربائية, والتحسسية لاغشية اوكسيدالنيكل غير المشوبة والمشوبة بالنحاس عند النسب ((1%,3%,5%,7%المرسبة على قواعد زجاجية مسخنة ب درجة حرارة c o (10 ± 400) وبسمكnm ( 10± 250 ) ، من حيود الاشعة السينية وجد ان جميع الاغشية النقية والمشوبة لها تركيب مكعبي , وبصورة عامة هناك زاويتي حيود عند المدى الزاويo 30 - 60)) تعود للسطحين (111)و(200) . وجد ان الحجم الحبيبي يزداد مع زيادة نسب التشويب حتى نسبة 3% ثم تنخفض قيمته عند النسب 5%, 7% ,ومن خلال قياسات ماسح القوة الذرية AFM وقياسات المجهرالالكتروني الماسح SEM تم التعرف على تاثير التشويب على جميع خواص الاغشية, كما تبين من نتائج التشويب ان زيادة التشويب تؤدي الى االزيادة في الحجم الحبيبي عند النسب (1%و3%) ثم ينخفض عند النسب (5% و7%). اشتملت الرسالة دراسة الخواص البصرية لاغشية اوكسيد النيكل غير المشوبة والمشوبة بالنحاس , وتبين ان فجوة الطاقة تقل من3.8 - 2.8) ev ) بزيادة نسبة التشويب. وجد ان الاغشية لها معامل امتصاص عالي cm(α>10 ) الذي يؤدي الى زيادة احتمال حدوث الانتقالات المباشرة بين المستويات البلورية وبينت النتائج ان معامل الامتصاص يزداد مع زيادة نسب التشويب. وقد اظهرت نتائج الخواص الكهربائية (D.C) زيادة التوصيلية الكهربائية مع زيادة التشويب لتصل اعلى قيمة لها عند نسبة 7%. وقد وجد ان لجميع الاغشية طاقات تنشيط تقل مع زيادة نسبة التشويب. من قياس تاثير هول وجد ان تحركية حاملات الشحنة تقل وتركيز الحاملات تزداد مع زيادة نسب التشويب . اما خصائص التحسسية لجميع الاغشية المحضرة تم قياسها للابخرة (NH ,H O )عند تراكيز مختلفة ppm(100,200,300) عند درجة حرارة ,150° c واظهرت النتائج ان افضل تحسسية كانت عند نسبة تشويب 5% لبخار NH , وقد وجد ان هناك زيادة خطية للتحساسية مع زيادة تركيز البخار. وهذا بسبب زيادة كمية البخار الذي يتفاعل مع سطح الغشاء الرقيق. | In the present work, a good adherent and smooth films of undoped and copper doped NiO have been prepared by using low cost spray pyrolysis technique at different percentage of copper concentration ,structural, optical, electrical, and sensing properties have been studied at different concentrations of Cu (1% ,3%,5%,7% ) deposited on glass substrate at temperature (400±10) oc with (250±10)nm thickness . From the X - ray diffraction investigation, the crystalline structure of thin films was a polycrystalline with a cubic structure , generally the peaks of the NiO and NiO : Cu thin films were observed at diffraction angles at the range (37°and 43°). All NiO : Cu thin films display peaks of (111), (200) and Cu peaks do not appear even after adding a higher quantity of Cu into the NiO films, the angle position of peak (111) shifted toward lower value with doping in Cu at 1%,3% then start to increases at 5%,7% concentration,resulting in the increasing of lattice constant (a),interplaner spacing (d) and crystallite size (D),then decreases due to the degradation in the crystallinity of NiO doped with 5%,7% respectively,surface analysis by SEM and AFM have been used to understand the effect of the doping on morphology properties of the samples. The doping resulted in increasing grain at doping rates (1%,3%), then decreases at doing rates (5%,7%). The measurements of optical properties of undoped and copper doped NiO films decreased with increasing the doping rate.Also the results have showed that absorption cofficient increases with doping to reach maximum value at 7% concentration .The energy gap of was calculated for undoped and copper doped NiO films,it is noticed that the energy gap decreases with the increases of doping until it reaches the minimum value at 7% doping concentration .The D.C measurements show that the resistivity decreased with increasing doping rate,also the hall measurements have been showed the carrier concentration increased with increasing doping rate. The AFM results reveal that the grain size increases with the increase in copper concentration at rates (1%,3%) and then decreased at rates (5%,7%).The sensing measurements showed that undoped and copper doped NiO thin films have high sensitivity to NH vapor as compared to H O vapor , and the best result was 26% at doping rate 5% at 300ppm vaopr concentration ,at operation temperature 150 o c for NH vapo
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: انوار حسين علي الفؤادي
اسم المؤلف: رانيا رعد كاظم الكناني

دراسة طيفية لبعض الجزيئات ثلاثية الذرات باستخدام الطرق شبه التجريبية Spectroscopic study of some tri atomic molecules using semi - empirical methodes

المستخلص: تــم في هــذا البحث دراسـة الخـواص الطيفيه كجهد التاين , الالفه الالكترونيه وقيم الطاقه للمدارات الجزيئيه المشغوله بالالكترونات (EHOMO)، والفارغة من الالكترونات (ELUMO) وفجوة الطاقة وكذلك حساب الكهروسالبيه والصلاده الكيميائيه والنعومه (قابلية التفاعل). لبعض الجزيئات ثــلاثيـة الـــذرات نظـــريا , اذ ان الجزء النظري تمت دراسته من خلال استخدام برنامج كاوسين (Gaussian09 لبعض الجزيئات الثلاثية الذرات كجزيئة ثاني اوكسيد الكربون , الماء , الاوزون , هيدروكسيد الصوديوم , كبريتيد الهيدروجين وكلوريد المغنسيوم وذلك باستخدام برامج الكم شبه التجريبية التي تستغرق مدة زمنية للحسابات (PM3,PM6) قياسا الى الطرائق المتقدمه التي استخدمت في البحث هي طريقتا دوال الكثافة وهارتري فوك ( HF, DFT ) وباستخدام عناصر مجاميع اساس مختلفه . تم رسم الشكل الهندسي الفراغي الاكثر استقرارا اعتمادا على المحاور الداخلية (˚r,θ˚,Φ)f ومنها تم حساب اطوال الاواصر والزوايا المحصورة بينها وعزمي القصور الذاتي وثنائي القطب , ثوابت الدوران , الكتله المختزله , طاقة نقطة الصفر والاستقطابيه وطاقات المستويات الاهتزازية المنشطرة نتيجه لتاثير رينر - تيلر , ومضاعف - - ℓ وحساب الانتقالات بين المستويات الاهتزازيه كذلك حساب الطاقه الكليه للجزيئات كافه. كذلك تم حساب ترددات انماط الاهتزاز الاساسية للجزيئه ورسمها ضمن منطقة الاشعة تحت الحمراء من الطيف الكهرومغناطيسي . اذ توصلت الحسابات النظرية ان قيم مضاعف - ℓ - تزداد كلما انتقلت الجزيئات الى مستويات طاقة اعلى واما بالنسبة لحسابات تاثير رينر - تيلر وجد انها تسبب في انشطار مستويات الطاقة الاهتزازية بالنسبة لكل الجزيئات في المستويين الاهتزازيين (1,0,1) و(2,2,0) لهما مقدار الطاقة نفسه . اضافة الى جانب وجود مستويات طاقة اخرى منشطرة متقاربة في قيم طاقاتها . | The study of spectral properties such as ionizations potential, electron affinity, electronegative, chemical hardness, softness and electrophonic index from inharmonic potential energy curve, spectroscopic dissociation also calculated EHOMO, ELUMO and energy gap Eg by theoretical parts .this studies by using Gaussian 09 (Gaussian 09 Revisioon - A - 02 - SMP) program of some tri - atomic molecules such as (CO2, H2O ,O3 NaOH ,H2S , MgCl2 molecules ) using semi empirical quantum programs , By using semi - empirical (PM3,PM6) , density functional theory and Hartree - Fock (DFT ,HF) methods this by using different basis sets So after drawing structure optimization of molecules depending on the internal coordinate f(r,θo,φo), then calculate length of bonds and angles between it , moment of inertia, dipole moment for Molecules by quantum mechanics methods which, then we calculated the orbital energy values (EHOMO ) and (ELUMO) ; and from these values ; ionization energy was calculated for molecule by take absolute values to (EHOMO )A computational calculation is a valuable tool for estimating the (geometry, total energy, electronic properties, dipole moment, polarizability, electrostatic surface potential, vibration frequencies) of molecular structures. The IR spectrum of molecule primitive vibration frequency located within infrared region from spectrum ranged is obtained Then - ℓ - type doubling we conclude that values increasing with it exited to high levels , from Renner - Teller effect cause splitting of energy of or vibrational state (1,0,1) , (2,2,0) have the same energy
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: العربية
الدرجة: دكتوراه
الموضوع الدقيق: الفيزياء
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: زياد عدنان صالح
اسم المؤلف: ذكرى كمال طه

تقدير الحاصل النيتروني لبعض نوى النظائر المتوسطة نتيجة لتفاعلات البروتون وجسيمات الفا والنيوترون لمدى طاقة (E=10 - 50) MeV

المستخلص: للنظائر اهمية كبيرة في كثير من المجالات مثل المجالات البحثية والصناعية والطبية ومجالات اخرى. فبعضها يحتاج لنظائر بنصف عمر طويل او بنصف عمر قصير وحاصل نيتروني عالي او قليل للحالتين, لذا تضمن هذا العمل دراسة الخصائص النووية لتسعة عناصر متوسطة الاعداد الكتلية هي (Ca ,Sc ,Ti ,Ni ,Cu ,Zn ,Zr ,Nb ,Mo ), ولكل عنصر تم اختيار عشرة نظائر لذا تضمنت الدراسة 90 نظير اعدادها الكتلية بين (41 الى 96) , شملت هذه الدراسة حساب طاقة التفاعل, طاقة العتبة, الكتلة المختزلة, طاقة فصل النيوترون وطاقة الربط النووية لتفاعلات ,Ca(α,n)Ti Ni(α,n)Zn , Zr(α,n)Mo , ,Sc(p,n)Ti ,Cu(p,n)Zn Nb(p,n)Mo , ,Ti(n,n)Ti Mo(n,n)Mo ,Zn(n,n)Zn لنظائر العناصر اعلاه , كما تم حساب قدرة الايقاف باستعمال برنامج (SRIM 2013) ومن ثم حساب الحاصل النيتروني من المعادلات النظرية اعتمادا على احدث ما نشر من المقاطع العرضية للعامين (2010 ,2012 ), كما تم في هذه الدراسة استخراج مجموعة من المعادلات شبه التجريبية الموحدة لحساب المحصول النيتروني لهذه العناصر بشكل مباشر لنوعين من التفاعلات (α,n) و(p,n) والتي كل منها يشتمل على عشرة نظائر ليكون المجموع 60 تفاعل, نتائج الحاصل النيوتروني المحسوبة من هذه المعادلات اعطت توافقا جيدا مع القيم النظرية التي حسبت من المعادلات النظرية. هذه المعادلات مع ثوابتها وضعت ضمن برنامج ماتلاب صمم لهذا الغرض وبالاعتماد على نوع العنصر ونوع التفاعل وطاقة الجسيم الساقط لايجاد الحاصل النيتروني لاي نظير عدده الكتلي بين (40 - 100 ) لمدى طاقة يتراوح بين (15 - 50) مليون الكترون فولط. يمكن تطوير البرنامج ليشمل عدد اكبر من العناصر بنظائرها ولمديات طاقة اوسع. | Isotopes have a great importance in many fields such as research, industrial, medical and other. Some of them need isotopes with long half life or short half - life with high neutron yield or less for them. So this work included the study of the nuclear properties for nine medium elements (Ca, Sc, Ti, Ni, Cu, Zn, Zr, Nb and Mo), from each element we choose 10 isotopes, so the total are 90, their masses numbers were between (41 to 96), this study included the calculations of the Q - value reaction, threshold energy, reduced mass, separation energy of neutron and the binding energy for nuclear reactions , Ca(α,n)Ti , Ni(α,n)Zn , Zr(α,n)Mo , Sc(p,n)Ti , Cu(p,n)Zn , Nb(p,n)Mo , Ti(n,n)Ti Mo(n,n)Mo and Zn(n,n)Zn for the isotopes of the above elements, also we calculated the stopping power by using a (SRIM 2013), then the neutron yield was calculated from theoretical equations depending on most recent cross - sections (2010.2012), as well as this study focused on the extraction of a set of uniform empirical equations to calculate the neutron yield in directly for (α, n) and (p, n) reactions for these elements, and each of them includes 10 isotopes so the total reactions are 60. The result of neutron yield for these equations was in a good agreement with theoretical value which is calculated from the theoretical equations. These set equations with their coefficients were put within the MATLAB program, it was designed for this purpose and by depending on the element type, the type of reaction and incident particle energy to find the neutron yield for any isotope, their mass number is between (40 - 100) for energy range within the (15 - 50) MeV. This program can be developed to include a greater number of elements with their isotopes and for larger energy range.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: دكتوراه
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: خالد هادي مهدي العبيدي
اسم المؤلف: رافت عبد الحسن مسلم

تصنيع كواشف ضوئية باستخدام اوكسيد التيتانيوم المطعم باوكسيد الخارصين ذو التركيب النانوي بواسطه تقنية الليزر النبضd Fabrication of photovoltaic detectors using TiO2 doped with ZnO nanostructure by PLD technique

المستخلص: In this work, a Nd : YAG laser beam (λ=1064nm, repetition rate 6 Hz with the pulse duration 10ns) has been used to deposit thin films TiO2 pure and TiO2 doped with ZnO at different concentrations (2%, 5%, 7%) on glass and silicon substrates. The laser fluence is kept at 700 mJ/cm2 and the pressure is kept at 10 - 2 mbar to specify the optimum condition of deposition. TiO2 - ZnO thin films are investigated by using different techniques such as X - Ray Diffraction (XRD), Atomic Force Microscope (AFM), UV - VIS transmittance spectroscopy, Hall Effect and detector properties equipment.X - Ray Diffraction (XRD) results showed that by increasing ZnO concentration and annealing temperature (500°C) TiO2 transformed from amorphous structure to polycrystalline structure. AFM results showed that the RMS and the grain size was increased with increasing the concentration of zinc oxide. The root mean square (RMS) reachs to 15.2 nm at room temperature and after annealing temperature at 500°C reachs to 16.1nm. Also, the grain size increased with increasing ZnO concentration up to (100.12) nm at the concentration 7% after annealing temperature. UV - VIS transmittance measurements show that the transmittance were high in infrared region and decreases with increasing ZnO concentration and after annealing. Hall Effect is studied to estimate the type of carriers. From the results it was deduced that all (TiO2 : ZnO) films were n - type. As a result, it has been found that film structure and properties are dependent on annealing , as well as different concentrations.From the (I - V) measurements by using UV laser diode with a wavelength (385nm) found that the responsivity of the detector increased at concentration 7% reach to (3.39)A/W and after annealing in temperature 500°C reach (3.82)A/W.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: سمر يونس الدباغ
اسم المؤلف: ذرى طارق عباس

دراسة تاثيرات خسارة الانحناءات لليف البصري في منظومة الاتصالات البصرية Study Effects of Optical Fiber Bending Loss in Optical Communication System

المستخلص: في هذا البحث , تم دراسة تاثير الانحناء على انتقال الاشارة الضوئية خلال الالياف البصرية. هذا العمل يتضمن قياسات الخسارة في القدرة خلال الليف البصري بوجود الانحناءات عند عدد لفات مختلفة من (1 - 10) لفة وعند اقطار انحناء مختلفة (12.5 , 10.5 , 8 , 6 , 4 , 3 , 2 , 1) cm. نوعين من الالياف البصرية تم استخدامها , الليف المتعدد الانماط (MMF ) باطوال مختلفة (1 , 20 , 40 , 100 , 120 , 140 ) m وليف احادي النمط بطول (4.5 m) .واستخدم نوعين من الليزرات ليزر دايود الاحمر (λ=650 nm) وليزر دايود اخضر (λ=532 nm).القدرة الضوئية تم قياسها باستخدام جهاز قياس القدرة. تشير النتائج ان كلما قل قطر الانحناء وزادت عدد اللفات فان الخسارة في القدرة الضوئية تزداد. حيث ان القدرة الضوئية لليزر الاخضر عند الطول الموجي (λ=532 nm) تقل من (48.083*10 - 4) mW الى (41.114*10 - 4) mW عند اللفة الاولى لليف متعدد الانماط بطول (40m) عندما تم حني الليف من cm12.5 الىcm 1. اما لليف الاحادي النمط, فان القدرة الخارجة لليزر الاخضر عند طول موجي (λ=532 nm) تقل من (13.608) mW الى (13.32) mW عند اللفة الاولى من طول (4.5) m لليف احادي النمط عندما تم حني الليف من 12.5 cm الى 3 cm . اظهرت النتائج ايضا ان تاثير الانحناء في القدرة الخارجة في حالة الليف المتعدد الانماط اكبر مقارنة بالليف احادي النمط. وكذلك النتائج لهذا البحث تتضمن تصميم وتنفيذ منظومة اتصال الالياف البصرية لفحص تاثير الانحناء على الاشارات المنتقلة خلال الالياف البصرية متعددة الانماط حيث لف من (1 - 10) لفة وعند اقطار انحناء مختلفة ( 1,2,3,4 ) cm . تم تضمين الاشارات باستخدام ليزر nm 532 .الاشارة تم ارسالها خلال ليف متعدد الانماط باطوال مختلفة وهذه الاشارة تم الكشف عنها باستخدام كاشف السليكون الضوئي (AEPX 65) . وجد ان الانحناءات تؤدي الى تغييرات واضحة في سعة ( جهد ) الاشارة الخارجه ؛ حيث يقل الجهد من 0.64volt الى 0.52 volt عند زيادة عدد اللفات من) 1 - (10 لفة في ليف بطول 40m وقطر الانحناء (1) cm.ويقل الجهد الى حد 0.2 volt في ليف بطول 140m وقطر الانحناء (1) cm.واخيرا الاشارات المنتقلة فيمنظومة الياف بصرية باستخدام كاميرا (CCD) واستخدام حاسبة شخصية معUSB TV STICK لرؤية تاثير الانحناء على انتقال الاشارات خلال الالياف البصرية. حيث ان الاشارة الخارجة ستقل من 0.68 volt الى 0.6 volt عندما عدد اللفات تزداد من (1 - 5) لفة في ليف بطول (1) m .اجرى احتساب كل من نسبة الاشارة الى الضوضاء ومعدل الخطا في نقل البيانات في للاشارات المنتقلة في منظومة الاتصالات عند اقصى طول لليف البصري 140m وعند اللفة 10 فكانت 115.147dB و3.68x10 - 27 على التوالي . بينما نسبة الاشارة الى الضوضاءSNR ومعدل الخطاBER في نقل البيانات في الاشارات المنتقلة باستخدام كاميرا CCD عند طول الليف البصري 1m وعند اللفة 10 فكانت 100.49dB و5.98x1o - 24 على التوالي .. اظهرت النتائج ايضا ان نسبة الاشارة الى الضوضاء تقل ومعدل الخطا في نقل البيانات يزداد بزيادة عدد اللفات في كلا المنظومتين | In this work, bending loss effects of optical fiber on the transmitted signal were studied.This work includes measurements of the power loss through optical fiber with the presence of bends at different wrapping turns (1 - 10) turns and at various bending diameters (12.5, 10.5, 8, 6, 4, 3, 2, and 1) cm. Two types of optical fibers were used, multimode optical fiber (MMF) of different lengths (1, 20, 40, 100, 120, 140) m and a single mode optical fiber (SMF) of length (4.5 m). Two optical sources were used, Red laser diode (λ=650 nm) and green laser diode (λ=532 nm). The output power was measured using an optical power meter. Results indicated that as the bending diameter decreased and the number of wrapping turns increased, the power loss increased. The output power of green laser diode at (λ=532 nm) decreased from (48.083*10 - 4) mW to (41.114*10 - 4) mW at the first turn of 40m MM fiber length when bent from (12.5 to 1) cm. For SMF, the output power of green laser diode at (λ=532 nm) decreased from (13.608) mW to (13.32) mW at first turn of (4.5) m SM fiber length when bent from (12.5 to 3) cm. The higher alteration output power in the case of multimode fiber has been deduced as compared with that of the single mode fiber. Also the results of the project involves a design and an implementation optical fiber communication system to investigate the effect of bending on the transmitted signals through multimode optical fiber wrapped (1 - 10) turns and at different diameters (1, 2, 3, 4) cm . Signals were modulated using 532nm laser diode then sent through multimode fiber of different lengths and detected by silicon photo detector (AEPX 65). The bending induces changes in the amplitude (voltage) of the output signal, the output voltage decreased from 0.64 volt to 0.52 volt when the no. of turns increased from 1 - 10 turns for 40 m optical fiber at a bending diameter of (1cm) and decreased to 0.2 volt for 140m multimode fiber at a bending diameter of (1cm).Finally, a transmitted signal in optical communication system has been built using CCD camera and Pc with USB TV STICK for monitory the effect of bending on signals that transmitted through optical fibers. The output transmitted signals decreased from 0.68 volt to 0.6 volt when the no. of turns increased from 1 - 5 turns for 1 m optical fiber. The calculations of signal to noise ratio (SNR) and Bit Error Rate (BER) for transmitted signals in optical communication system at maximum fiber length of 140m and 10turns are equal to 115.147dB and 3.68x10 - 27 respectively. While for transmitted signal form CCD camera at fiber length 1m and of 10 turns are equal to 100.49dB and 5.98x1o - 24 respectively.Results show that SNR decreased and BER increased as no. of wrapping turns increased for both systems.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
الموضوع الدقيق: الفيزياء
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: سمر يونس الدباغ
اسم المؤلف: دعاء هشام محمد

محاكات الهوائي الكسوري باستخدام منحني كوج ومينكوسكي Simulation of Fractal Antenna Using Koch and Minkowiski Curves

المستخلص: الهوائي عنصر رئيسي في الاتصالات اللاسلكية فهو الادات التي تستقبل وترسل الموجات الكهرومغناطيسية في الفضاء الحر. ان التوسع الهائل في الاتصالات اللاسلكية بحاجة الى هوائيات متعددة الحزم وصغيرة الحجم وبمقطع جانبي منخفض ومن اجل تطوير اداء الهوائيات استخدمت الهندسة الكسورية لتحسين خواصها . والتي تجعل الهوائي متعدد الوظائف . في هذة الرسالة استخدمت تقنية جديدة لتحسين اداء الهوائيات الكسورية ثنائية القطب باستخدام عاكس كسوري متحرك. استخدمت الحقيبة البرمجية 4NEC2 لمحاكاة اول ثلاث تكرارت لهوائيات منحني Koch ومنحني Minkowski قبل وبعد اضافة العاكس الكسوري . ومن اجل تصميم الهوئيات بدقة عالية استخدم البرنامج Adobe illustrator CS4 لرسم جميع الهوائيات المقترحة . ومن نتائج المحاكاة لوحظ ولجميع الهوائيات ان العاكس الكسوري المتحرك حسن من قيمة VSWR (نسبة فولتية الموجة الواقفة) والكسب والتوجية وكذلك زاد الترددات الرنينية المفيدة للتكرارات الثلاثة لمنحني Koch . حيث اضاف تردد رنيني مفيد للتكرار الاول وترددين رنينيين مفيدين للتكرار الثاني وتردد رنيني للتكرار الثالث كذلك اضاف ترددين رنينيين مفيدين للتكرار الثالث لمنحني Minkowski . | Antenna is the main element in wireless communication. It is the instrument which receives and transmits the electromagnetic wave in a free space. The great expand in wireless communications need antennas with multiband, small size and low profile. In order to develop the performance of antennas, fractal geometry is used to optimize the property of the antenna. It makes antenna multi - functional. In this thesis a novel technique is used to optimize the performance of fractal dipole antennas by using a movable fractal reflector. 4NEC2 software package is used to simulate the first three iterations for (Koch curve and Minkowiski curve) antennas before and after adding the fractal reflector. In order to design fractal antennas with high accuracy, Adobe illustrator CS4 software program is used to draw all proposed antennas. From simulation results and for all proposed antennas are observed the movable fractal reflector optimize the value of voltage standing wave ratio VSWR, gain and directivity. Also, it increases the benefit resonant operating frequencies for all three iterations of the Koch curve. It adds one benefit resonant frequency to the first iteration and two benefit resonant frequencies to the second iteration and one benefit resonant frequency to the third iteration. Also, it adds two benefit resonant frequencies to the third iteration of Minkowiski curve
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
الموضوع الدقيق: الفيزياء
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: كاظم جواد كاظم الشجيري
اسم المؤلف: خضير عباس قنبر

غشاء ZnO - SnO2 وخصائصه التحسسية ZnO - SnO2) Thin Film and Their Sensing properties

المستخلص: ZnO,SnO2,Zno - Sno2 composite( ل في هذا البحث تم دراسة الخصائص التركيبية والتحسسية على توالي والمحضرة على قواعد قواعد زجاجية بظروف ترسيب مختلفة من نسب المواد (100% : 0%,0% : 100%, 50% : 50%, 30% : 70% , 10% : 90% ) وبدرجة حرارة القاعدة ( 400 & 450 ) سيليزية وبزاوية رش ( 0& 45 ) درجة. بينت فحوصات تقنية حيود الاشعة السينية (XRD) لتشخيص طبيعة تبلور الاغشية المحضرة, ان جميع الاغشية المحضرة ذات تركيب متعدد التبلور من نوع سداسي hexagonal)).مع اتجاهيه (002 ) للعينات المحضرة ل) ( ZnO,ZnO : SnO2 compositeما عدا (SnO2 ) فهو ذو تركيب متعدد التبلور من النوع الرباعي ( tetragonal ) مع اتجاهية ( 110 ) ، كما اظهرت النتائج الحصول على التركيب نانوي بمعدل حجم حبيبي ( من 2.4 الى 46 نانو) وتجانس منتظم بواسطة اضافة اوكسيد القصدير الى اوكسيد الزنك ، وهذا اعطى تبلور عالي مع ظروف الترسيب المختلفة. بواسطة تحليل السطح بواسطة المجهر الالكتروني الماسح ( SEM ) ومجهر القوة الذرية ( AFM ) تم التعرف على تاثير ظروف الترسيب المختلفة على خصائص تشكل العينات ، اظهرت صور (SEM ) تراكيب مختلفة مثل الابر والالياف والقضبان السداسية النانوية و(rich particle ) كما اظهرت النتائج التجانس والتوزيع المنتظم والنمو العالي ، كذلك زيادة معدل الحجم الحبيبي وزيادة الخشونة وهذا يقود الى الحصول على مساحة سطحية عالية وتاثير كبير على التحسسية .كل القياسات التحسسية اظهرت تحسسية عالية عند درجة حرارة القاعدة ( 450 ) سيليزية بزاوية رش (45 ) درجة ونسبة (SnO2 50% : % 50 ZnO) وعند زيادة نسبة ( ZnO ) لتصبح (100 % ) فان التحسسية تقل. ان العامل المؤثر على التحسسية هو نسبة المواد الداخلة في تركيب الاغشية الرقيقة كافضل نسبة حجمية 50)٪ 50 : ٪( وعند زيادة نسبة لتصبح 100٪ اوكسيد الزنك فان التحسسية تقل . اوكسيد الزنك لديه تحسسية عالية، ولكن عندما يخلط مع SnO2، وهذا يؤدي الى زيادة تحسسية وهذا واضح من خلال النتائج المستحصلة. | In this work, structural and sensing properties have been studied for ZnO, SnO2 compound and ZnO - SnO2 composite thin films. They were prepared by spray pyrolysis technique deposition at substrate glass, were used different deposition conditions, volume ratios(100% : 0%, 0% : 100%,50% : 50%, 70% : 30%, 90% : 10%,), Substrate temperature ( 400)&(450) oC , incident angle spray of spray pyrolysis (0) & (45) .. The X - ray diffraction technique has showed that all prepared films are polycrystalline structure with hexagonal type that preferred orientation of plan (002) direction for all thin film prepared for ( ZnO compound, ZnO - SnO2 composite thin films) except SnO2 thin films are polycrystalline structure with tetragonal type with preferred orientation of plan (110) , the results obtained by X - ray diffraction showed that we get the installation of nano structure with average grain size between ( 2.4 to 46 nm) and uniform Homogeneity by added tin oxide to zinc oxide, the results show high crystalline with deferent conditions deposition. Surface analysis by SEM and AFM have been used to understand the effect of the different conditions deposition on morphology properties of the samples. The SEM micrographs show needle - like, fiber - like , hexagonal nano rods, rich particles ( high growth) and homogeneity , uniform distribution, high growth. The results showed an increase of the average grain size with increasing roughness and this leads to obtain a high surface area and large effect on sensitivity. Overall measurements sensing showed that the highest of sensitivity at substrate temperature (450 oC) ,incident angle spray pyrolysis (45) with ratio ( 50% : 50%) . The influencing factor on sensitivity is the ratio of materials involved in the structure of thin - film as the best volume ratio its (50% : 50%) and when you increase the ratio to become 100%ZnO the sensitivity decreases. ZnO has high sensitivity, but when mixed with SnO2, this leads to increase sensitivity and this is clear from the results that were obtained.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
الموضوع الدقيق: الفيزياء
السنة: 2013
الموضوع العام: علوم الفيزياء
اسم المشرف: علي جاسم محمد الجابري
اسم المؤلف: خالد وليد صابر

التدريع الفعال لغرف الاشعة السينية التشخيصية Effective Shielding For X - ray Diagnostic Rooms

المستخلص: وفقا لمصطلحات الاشعة السينية التشخيصية الطبية فان الاشعاع يتكون من الاشعاع الاساسي والاشعاع الثانوي .ان عملية وضع حواجز كالجدران التي تعترض الاشعاع الاساسي تدعى بالتدريع الاساسي في حين ان وضع حواجز للحماية من الاشعاع الثانوي تدعى بالتدريع الثانوي. في هذا العمل نتفحص حالة التدريع للحواجز الثانوية لغرفة التصوير الشعاعي للثدي والحواجز الاساسية لغرفة الاشعة السينية للصدر الرقمية في مستشفى الحسين التعليمي في مدينة كربلاء. باعتبار تصاميم غرف التصوير الشعاعي للثدي والاشعة السينية للصدر الرقمية ولمحة عن اجهزة التصوير الشعاعي المستخدمة فانه تم احتساب حمل العمل الكلي السريري لكل اسبوع وحمل العمل الكلي لكل مريض كما تم تحديد توزيعهما وفقا للفولتيات الاكثر استعمالا من خلال اختيار عشوائي للقيم التقنية السريرية الفعلية للــ mAs)) وقيم ذروة الكيلو فولت المناظرة لـ (2191) حالة تشخيص على مدى ثمانية اشهر لغرفة التصوير الشعاعي للثدي و(1402) حالة تشخيص على مدى اربعة اشهر لغرفة الاشعة السينية للصدر الرقمية. كمصدر لتدريع اشعاع الاشعة السينية التشخيصية فان تقرير المجلس الوطني للحماية من الاشعاعات والمقاييس رقم 147NCRP report No.147 )) وبرنامج الكمبيوتر (XRAYBARR) قد تم استخدامهما لحساب اسماك الحواجز الثانوية لغرفة التصوير الشعاعي للثدي والحواجز الاساسية لغرفة الاشعة السينية للصدر الرقمية . لغرفة التصوير الشعاعي للثدي فقد وجد ان حمل العمل الكلي في الاسبوع وحمل العمل الكلي لكل مريض كانتا تقريبا تساوي ما يحدده تقرير ان سي ار بي رقم 147 ( NCRP report No.147 ) لنفس عدد المرضى. الاسماك المطلوبة من الجبس والخشب كانا حوالي 4 ملم , 20 ملم على التوالي في حين ان الاسماك الفعلية الموجودة اعلى من هذه القيم. لغرفة الاشعة السينية للصدر الرقمية فقد وجد ان حمل العمل الكلي في الاسبوع كان بحدود 4.2 اضعاف ما يوصي به تقرير ان سي ار بي رقم 147 (NCRP report No.147 ) في حين ان حمل العمل الكلي لكل مريض كان بحدود خمسة اضعاف ذلك الذي يحدده تقرير ان سي ار بي رقم 147 ( NCRP report No.147 ) لنفس عدد المرضى لكل 36 ساعة عمل فعلية في الاسبوع لحالة ناشطة. السمك المطلوب من الرصاص كحاجز اساسي كان 2.7 ملم او 184 ملم من الخرسانة . في الواقع لم يكن هناك رصاص كحاجز اساسي بدلا عن ذلك فان مواد اخرى مثل الطابوق والخرسانة وجدت باسماك عالية كفاية لاستخدامها كحاجز تدريع اساسي.عظام الحيوانات استخدمت كاساس لاعداد اربعة نماذج من تركيبات مختلفة. هذه النماذج فحصت ضد اشعاع الاشعة السينية الاساسي عند جهود انبوب kvp 50 kvp 60 kvp 70 kvp 80 وkvp 90 باستخدام جهاز قياس معدل الجرعة minitracey. الانتقال النسبي , معاملات الملائمة باستخدام نموذج ارتشر Archer model , طبقة النصف ذات التوهين العالي ونسب التدريع لنماذج الانواع الاربعة حسبت وقورنت مع بعضها البعض. الكثافات وطبقات النصف ذات التوهين العالي عند kvp 50 وkvp 70 لنماذج الانواع الاربعة قورنت مع الكثافات وطبقات النصف ذات التوهين العالي لمواد التدريع الشائعة والمبتكرة. لقد وجد ان طبقات النصف ذات التوهين العالي لنماذج الانواع الاربعة افضل من طبقات النصف ذات التوهين العالي المواد الشائعة والمبتكرة. يستنتج من ذلك ان هذا النوع من المواد ستكون مفضلة كمادة تدريع ضد اشعاع الاشعة السينية الثانوية.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: دكتوراه
الموضوع الدقيق: الفيزياء
السنة: 2013
الموضوع العام: علوم الفيزياء
اسم المشرف: عبد الله احمد رشيد
اسم المؤلف: حيدر صادق جعفر

قياس تراكيز غاز الرادون ووليداته وتقييم التعرض في ابنية كلية العلوم في الجامعة المستنصرية Measurement of Radon and Daughters Concentrations and Exposure Assessment in the Buildings of the Science College at AL - Mustansiriyah University

المستخلص: The concentrations of Radon gas and their progeny have been measured in the building of Al - Mustansiriyah University College of Science. Deanship building, four flowers, includes dean office and administrative staff in addition to the department of mathematics, department of biology, lecture rooms and laboratories affiliated in addition to the basement of the Deanship building, building of department of chemistry libraries, building of department of physics libraries, and building of meteorology or atmospheric Science (in which the detectors have been suspended, but most of them had been lost because of the maintenance work, which cooperated with the preparation of this study).The nuclear track detector of solid state CR - 39 technique has been used to study the trace effect. 356 detectors have been suspended and distributed (two detectors) in each location under study. Detectors with 1cm x1cm area have been suspended with two heights; the first height represents the sit down mode and the second represents the standing mode, for a period of 90 days except those for the department of chemical libraries because of an official holiday in the Al - Mustansiriyah University.The dosimeters have been design to be adequate for the research environment. The samples are collecting after exposing time for the period mentioned above, then applying the chemical etching and Statistics numerical process the density of the nuclear has been calculated in order to calculate the concentrations of Radon and their daughters. The calibration process has been made in this work by exposing other detectors (similar of that used for the detecting) to Radium - 226 source with known activity radiation.It was found that all concentrations are within the world wide limits. It has been found the Radon concentrations in the basement of Deanship building are relatively higher than in other location have been observed. These concentrations are decreasing gradually with height to reach the lowest value at the fourth floor. It strengthens that the Radon gas is heavier than air. The yearly effective dose of the exposure to Radon has been calculated. The Radon concentration is within the world wide permissible limits.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
الموضوع الدقيق: الفيزياء
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: ايمان طارق العلوي
اسم المؤلف: حيدر عيد فاضل

الخواص الالكترونية لمادة هجينة مركب ثلاثي - خماسي/كرافين : حسابات نظرية دالية الكثافة Electronic Properties of III - V Compound / Graphene Hetero Material : Density Functional Theory Calculations

المستخلص: هذه الاطروحة هي دراسة نظرية للخصائص التركيبة والالكترونية لمجموعتين من اوراق الجرافين. وتضمنت المجموعة الاولى ثلاثة اوراق جرافين نقية ذات اطوال مختلفة GR1 ˃ GR2 ˃ GR3، وتمثل المجموعة الثانية ثلاثة اوراق متغايرة من جرافين - مركبات B/P والتي تم بنائها اعتمادا على GR1. تم تنفيذ العمليات الحسابية باستخدام تقريب الكثافة الموضعي / LDA / SZ لنظرية دالية الكثافة. وقد استخدم برنامج Gauss View 5.0.8 لتصميم تراكيب اوراق الجرافين النقية والمشوبة. في البداية، تمت عملية استرخاء هذه التراكيب عن طريق استخدام طريقة PM6 شبه التجريبية مع الدالة الهجينة B3LYP - DFT عند حزمة من برامج Gaussian 09 وبعدها تمت عمليه استرخاء التراكيب باستعمال برنامج SIESTA trunk - 462 من خلال تطبيق نظرية دالية الكثافة LDA / SZ. يلاحظ من نتائج الخصائص التركيبية لاوراق الكرافين المدروسة ان هناك استرخاء جيد لهذه التراكيب، تبقى قيم الاواصر في اوراق الكرافين النقية C - C، C⚍C وC - H في نفس المديات لتراكيب حلقات الكربون. كذلك، ان اضافة مركباتB / P في ورقة الجرافين النقية لبناء اوراق الجرافين المتغايرة لم يؤثر على الخصائص التركيبة للتركيب الاصلي . وان الالتواء الملاحظ في حلقات الفينيل في مناطق الاتصال مع الحلقات المطعمة ياتي من زوايا الالتواء بين ذرات مختلفة بسبب اختلاف الكتلة الذرية والكهروسالبية لذرات B، P وC. تم استخدام نظرية دالية الكثافة LDA / SZ في برنامجGollum لحسابات الخصائص الالكترونية لمجموعتي اوراق الجرافين. ان نتيجة الطاقة الكلية لاوراق الجرافين المدروسة هو انعكاس لطاقة الربط لكل تركيب وتشير الى ان هذه التراكيب تمتلك استرخاء جيد ، وتاثير اضافة ذراتB وذرات P في ورقة الجرافين النقية GR1 كان له دور فعال على الطاقة الكلية للجزيئة. نبين ان كل اوراق الجرافين لها موصلية عالية وفجوة طاقة ممنوعة صغيرة، لكنها تتذبذب تبعا لطول وشكل كل ورقة وعدد وموضع ذرات B وP في الورقة. واظهرت القيم المحسوبة لطاقة فيرمي EF بان قيم EF لاوراق الجرافين النقية تتزايد مع تناقص طول الورقة. وباضافة ذرات B وP باشكال وهيئات مختلفة في GR1 سوف يغير من موقع مستوى فيرمي، ان كافة الاوراق المطعمة لها EF اكبر تقريبا من GR1. وياتي ذلك من اضافة مركبات B / P في GR1 الذي اعطى للورقة خصائص الكترونية جديدة.ان طاقة التاين IE والالفة الالكترونية EA لاوراق الجرافين النقية تنخفض قليلا مع تناقص طول الورقة. وكافة اوراق الجرافين المطعمة لها قيم منخفضة من IE وEA بالمقارنة مع GR1 النقي. ايضا، تظهر نتائجنا ان جميع اوراق الجرافين النقية والمطعمة تمتلك صلادة كهروكيميائية H عالية ومرونة الكترونية S عالية . المرونة الالكترونية العالية ستفتح افاق مستقبليه كاشارة لفجوة حزمة للتركيب مما يجعله يكون مرنا نوعا ما ، ان الكهروسالبية X قد انخفضت مع تناقص طول اوراق الجرافين النقية ، وX لاوراق الجرافين المطعمة هو اقل منها لورقةGR1 ، وهذا يعني ان الالكترونات في هذه الاوراق المطعمة لديها ميل كبير للهروب.واظهرت النتائج ان التوصيليات الكهربائية والحرارية لاوراق الجرافين النقية تكون في الترتيب GR1 ˃ GR3 ˃ GR2 ، التوصيلة الكهربائية والتوصيلة الحرارية لاكبر ورقة تكون هي القيم العليا، وهذا يرجع الى ان GR1 لديه قنوات متعددة لنقل الالكترون، من ناحية اخرى، القيم العليا لفجوة الطاقة خفضت التوصيلة الكهربائية والتوصيلة الحرارية. في حين، ان التوصيلة الكهربائية، وبالتالي ,التوصيلة الحرارية لاوراق الجرافين المطعمة كانت في الترتيب GR6 ˃ GR5 ˃ GR4، وبزيادة عدد ذرات B وP في الورقة انخفضت التوصيليات الكهربائية والحرارية. في جميع الحالات ، ان GR1 النقي لديه قيم توصيلية كهربائية وحرارية اعلى من تلك التي للاوراق المطعمة .ان النتيجة القيمة للغاية تم الحصول عليها من خصائص I - V للتراكيب المدروسة حيث ان سلوك التحسس قلل تماما من تاثيرات درجة الحرارة العالية التي تظهر في الاجهزة الكبيرة القديمة. وتشير حسابات I - V ان التفاعل المناسب مع الاقطاب يكون تاثيره محدودا الى حد ما على سلوك التحسس لاوراق الجرافين النقية والمطعمة. ان نتائج التحسس نتجت من تقليل فجوة الطاقة بين HOMO للورقة ومستوى فيرمي لقطب الذهب في الحيز الامامي والعكسي . ومن نتائج معامل Seebeck، يظهر لنا مساهمة متماثلة لتراكيز الالكترونات والفجوات حول منطقة الطاقة، وقد تبين ان الورقة الاكبر GR1 تملك القيمة الاقصى لمعامل Seebeck . وقد لوحظ ان معاملات الانتقال لاوراق الجرافين النقية تحدث على طول مدى واسع من طاقة الالكترون لانها لا تحوي منطقة استطارة. ايضا، ان الورقة مع عدد قليل من ذرات B وP كالحلقة النقطية في منتصف الورقة GR6 لها قيمة عالية من معامل الانتقال ، وهذا بسبب العدد الكبير من القنوات المفتوحة. وبشكل عام، معامل الانتقال للاوراق المدروسة لديها مدى واسع على نطاق الطاقة | This thesis is a theoretical study of structural and electronic properties of two groups of graphene sheets. The first group included three pure graphene sheets of different lengths GR1 ˃ GR2 ˃ GR3, and the second group represents the three sheets of heterojunction graphene - B/P compounds which were constructed on the basis of GR1.The calculations are carried out using the Local Density Approximation/Single Zeta LDA/SZ density functional theory. Gauss View 5.0.8 program was used to design the structures of pure and doped graphene sheets.Initially, these structures are relaxed by employing the PM6 semi - empirical method with the hybrid functional B3LYP - DFT at Gaussian 09 program package , and then they are relaxed at SIESTA - trunk - 462 of program by employing the LDA/SZ density functional theory. The results of the structural properties of the studied graphene sheets showed that there is good relaxation of the structures, the values of C - C, C⚍C and C - H bonds in pure graphene sheets remain in the same ranges of the carbon rings structures. So, the addition of B/P compound in pure graphene sheet to construct the heterojunction graphene sheets has no effect on the structural properties of the original structure. The screw observed in phenyl rings at the contact regions with the doped rings comes from the twist angles between different atoms due to the difference of the atomic mass and electronegativity of B, P and C atoms. The LDA/SZ density functional theory at the Gollum program was used for the calculations of the electronic properties of the two groups of graphene sheets. The result of the total energy of the studied graphene sheets is a reflection of the binding energy of each structure and indicates that these structures have good relaxation, and the effect of adding B and P atoms in pure graphene sheet GR1on the total energy of the molecule is effective. We showed all graphene sheets have high conductivity and small forbidden energy gap, but it vibrates depending on the length and shape of each sheet and the number and position of B and P atoms in the sheet. The calculated values of Fermi energy EF showed that the EF values of pure graphene sheets increase with decreasing the length of the sheet. Adding the B and P atoms in various shapes and forms in GR1 changes the position of Fermi level, all the doped sheets have EF approximately greater than that for GR1. This comes from the addition of B/P compound in GR1which gave the sheet new electronic properties. The ionization energy IE and electron affinity EA of the pure graphene sheets slightly decrease with decreasing the length of the sheet. And all doped graphene sheets have low values of IE and EA in comparison with the pure GR1. Also, we showed that all the pure and doped graphene sheets have low electrochemical hardness H and high electronic softness S. High electronic softness will pave the way for future prospects as a sign for that band gap of the structure wich becomes rather soft, the electronegativity X was decreased with decreasing the length of the pure graphene sheets, and the X of the doped graphene sheets is less than that for GR1, that means the electrons in these doped sheets have a large escaping tendency. The results showed that the electrical and thermal conductivities of the pure graphene sheets are in the order of GR1 ˃ GR3 ˃ GR2, the electrical conductivity and the thermal conductivity of the largest sheet are the higher values, this is due to the fact that GR1 has multi channels of electron transfer,and on the other hand, the higher the value of the energy gap,it decreased the electrical conductivity and the thermal conductivity. While, the electrical conductivity and therefore, the thermal conductivity of the doped graphene sheets are in the order of GR6 ˃ GR5 ˃ GR4,and by increasing the number of B and P atoms in the sheet, the electrical and thermal conductivities decreased. In all cases, the pure GR1 has values of electrical conductivity and thermal conductivity higher than those for the doped sheets. A very valuable result was obtained from I - V characteristics of the studied structures, in which the sensing behavior completely reduces the high temperature effects that appear in the old macro devices. The I - V calculations suggest that the suitable interaction with the electrodes have a rather limited influence on the sensing behavior of the pure and doped graphene sheets . The sensing results from the lowering of the energy gap between the HOMO of the sheet and the Fermi level of the gold electrode in the forward and reverse bias. From the results of the seebeck coefficient, we showed symmetrical contribution of electrons and holes concentrations around the region of the energy, it is found that the largest GR1 has the maximum value of seebeck coefficient. The transmission coefficients observed for the pure graphene sheets take place along a wide range of electron energy because they have not got a scattering region. Also, the sheet with small number of B and P atoms as a dot doped ring in the middle of the sheet GR6 has high value of transmission coefficient, this is due to high number of open channels. In general, the transmission coefficient of the studied sheets has a wide range on energy scale
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
الموضوع الدقيق: فيزياء الالكترونيات
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: حامد ابراهيم عبود محمد التميمي صباح نوري مزهر
اسم المؤلف: حوراء علي عبد الرضا

تحضير ودراسة سلوكيات الرص لمتراكبات (الومينا - المنيوم) Preparation & Studying the Compaction Behaviors of the (Alumina - Aluminum) Composite

المستخلص: تم تحضير المتراكب السيرميتي (سيراميك - معدن) من مادة الالومينا (Al2O3 - γ( كمادة اساس، ومن معدن الالمنيوم (Al) كمادة تدعيم، لتراكيز مختلفة من الالمنيوم (0 - 50)%، ونسبة زيادة التدعيم 10)%).تمت عملية التشكيل باستعمال الضغط باتجاه واحد، وانجزت عملية التلبيد في جو مفرغ من الهواء. درست سلوكيات الرص بحالة التلبيد الصلبة عند درجات حرارة التلبيد (400، 450، 550) م° ، وازمان التلبيد (2، 4، 6) ساعات، وعند ضغوط تشكيل (50، 100، 150) بار، تم الحصول على افضل الخواص الفيزيائية عند (550م°، 2ساعات، 150ساعة). تمت دراسة حالة تلبيد الطور السائل كدالة لتغير نسبة الالمنيوم في المتراكب عند (800م°، 2ساعة، 150بار)، بناء على ما تم التوصل اليه من خواص فيزيائية جيدة عند حالة التلبيد بالطور السائل، اختيرت هذه المواصفات لدراسة تاثير تغير الضغط عند (50، 100، 150) بار على الخواص الفيزيائية للمتراكبات السيرميتية المحضرة. اظهرت السلوكية عند المنطقة التي تحتوي تركيز الالمنيوم (40 - 50)% افضل الخصائص الفيزيائية، تبعا لذلك، درست اغلب القياسات على التركيز صاحب نسبة 50% من مادة الالمنيوم. المفهوم الاساسي الذي تضمنته هذه الدراسة هو التلاصق الفيزيائي بين مكونات المتراكب السيرميتي المحضر، والذي كان واضح من فحص انحراف الاشعة السينية. كذلك من الفحص المجهري (SEM) نلاحظ ان المتراكب النهائي (السيرميتي) المحضر اشبه الى ما يكون جزر موصلة (مادة الالمنيوم) مفصولة بمناطق عازلة (مادة الالومينا) وهذا ناتج بفعل التلاصق الفيزيائي. لوحظ ان زيادة نسبة الالمنيوم للمتراكبات المحضرة يلعب دورا مهما في الخواص الفيزيائية والكهربائية والتي تم مناقشتها بالتفصيل، وكذلك حسن من قيمة الصلادة للمتراكبات المحضرة، حيث ان التوزيع العشوائي لدقائق الالمنيوم ضمن مادة الالومينا، كون اقرب الى ما يكون الى شبكة داخلية معدنية زادت من متانة المتراكب المحضر من خلال ملء المسامات الموجودة غالبا بسبب مادة الالومينا الهشة. من خلال هذه الدراسة توصلنا الى ان المتراكب المحضر له نسبة مسامية عالية والتي يمكن توظيفها في صناعة فلترات الوقود. كما يمكن توظيف الخواص العزلية المحسنة التي توصلنا اليها في صناعة المتسعات السيرميتية (cermet capacitors )، كذلك من خواص مقاومة البلى التي توصلنا اليها، ممكن توظيفها في تصنيع ادوات القطع والبرد بعد اجراء التحسينات اللازمة. | A cermet (ceramic - metal) composite have been prepared from alumina ceramic (γ - Al2O3) as a matrix and from aluminum metal (Al) as reinforcement, prepared for different concentrations of aluminum (0 - 50)%, the reinforcing increment is (10%).The forming process was done by single action pressing, and the sintering process was done in vacuum atmosphere.The compaction behaviors of prepared cermet bodies were studied in solid state sintering, at sintering temperatures (400, 450, 550) °C, sintering times (2, 4, 6) hrs. and forming pressures (50, 100, 150) bar, the best physical properties were gained at (550 °C, 2hrs., 150bar).Liquid phase sintering process was studied as a function of Al percent in the composite at (800 °C, 2 hrs., 150 bar). According to the interesting physical properties we gained from liquid phase sintering process, these parameters were chosen to study the effect of the forming pressure ((50, 100, 150) bar) on the physical properties of the prepared cermet bodies. The behavior at the region that have aluminum concentration (40 - 50)% showed the best physical properties, according to this, most of the measurements were studied on the concentration of 50% of aluminum material. The basic concept of this study is the physical adhesion between the material particles of the prepared cermet bodies, which was obvious from the XRD tests. Also from the SEM micrograph we have notice the final structure of the prepared cermet, which is more like conducting islands (aluminum) separated by isolated areas (alumina), which is a sequent of the physical adhesion action.Increasing of aluminum content in the composite materials prepared may play an important role in physical and electrical properties has been discussed in detail, also enhanced the hardness of the samples, where the random distribution of aluminum particles through the alumina material, makes more like internal web of metal, that helps to increase toughness of samples by filling the porosities existed because of the brittle alumina.From this study we noticed, we have relative high porosity that could be employed in fuel filters. Also we have fine dielectric properties that could inter the application of cermet capacitors. Also, we have reasonable wear result that can be employed in grinding and cutting tools after improvements have been done.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: عبد الحميد رحيم مهدي الصراف
اسم المؤلف: حنان جميل مصطفى

قياس النشاط الاشعاعي في نماذج بايولوجية باستخدام كاشف الاثر النووي CR - 39 Radioactivity Measurement in Biological Samples Using Nuclear Track Detectors CR - 39

المستخلص: تضمنت هذه الدراسـه قياس تراكيز اليورانيوم في نماذج بايولوجيه مختارة من جسم الانسان ودمه , باستخدام تقنية التنشيط النيوتروني (النيوترونات الحراريه) المنبعثه من المصدر النيوتروني (241Am - 9Be) بسيل نيوتروني مقداره ((1.8 x1011 n/cm2, وتقنية عد اثار شظايا الانشطار النووي باستخدام كاشف الاثر النووي للحاله الصلبه CR - 39) ). تم جمع خمسون نموذج بايولوجي من محافظتي (بغداد وميسان ) اذ شملت هذه النماذج (نماذج الدم الغير مسرطن ونماذج الدم المسرطن من نوع سرطان الدم النخاعي المزمن ), وشملت الانسجه البشرية جهازين من جسم الانسان هما الجهاز الهضمي (المعده,الامعاء الدقيقه, الكبد, القالون,المراره, البنكرياس والاثنى عشر). والجهاز البولي (الكلى ,الحالب والمثانه) وتضمنت هذه الانسجه حالتين مرضيتين هما الاورام الحميده والخبيثه.شععت النماذج التي تم الحصول عليها بعد تحضيرها لمدة (7) ايام بالنيوترونات الحراريه المنبعثه من المصدر النيوتروني ذو الفعاليه (12 Ci) وبفيض نيتروني (5x105n.cm - 2.s - 1) وذلك لاجل شطر اليورانيوم الموجود في النماذج وتسجيل اثار شظايا الانشطار على الكاشف.درست ازمنه مختلفه لقشط هذه الكواشف لاجل الوصول الى الزمن الامثل للقشط باستخدام الحمام المائي حيث تم اختيار المحلول الكيميائي القاشط NaOH)) بعياريه6.25N)) ودرجة حراره (70 Co) وتبين ان الزمن 70 min)) افضل زمن قشط للكواشف التابعه لنماذج الدم والزمن (90min) افضل زمن قشط للكواشف التابعه لنماذج الانسجه البشريه .بينت هذه الدراسة ان اعلى قيمة تركيزلليورانيوم وجدت في نماذج الدم غيرمسرطنه (ppm 0.146) واقل قيمه (ppm 0.078) وبمعدل (0.107ppm) وفي نماذج الدم المصابه اعلى قيمه كانت (0.121 ppm) واقل قيمه تركيز (0.045 ppm) وبمعدل (0.085 ppm) اما في نماذج الانسجة البشريه اعلى قيمة تركيز لليورانيوم في الجهاز الهضمي بلغ (ppm 0.068) واقل قيمه (0.022 ppm) وبمعدل تركيز (0.044ppm ) وفي الجهاز البولي اعلى قيمه كانت (ppm 0.06) واقل قيمه كانت (ppm 0.023) وبمعدل تركيز(0.047 ppm) | This study involvement the measurement of uranium concentrations in biological samples selected from Human body and its blod using neutron activation technique (thermal neutrons) emitted from the neutron source (241Am - 9Be) with neutron flounce (1.8 x1011 n / cm2), using technique of the nuclear fission fragments in solid state Nuclear track detector (CR - 39) Fifty biological samples were collected from two governorates (Baghdad and Maysan) , included blood samples ( Normal and Leukemic type CML) and tissues samples of digestive system (Liver, Small intestine, Stomach, Gallbladder, Colon, Pancreas and Duodenum) and urinary system(Bladder, Kidney and Ureter) were this included two types of disease (Benign tumors and malignant tumors ) All samples are irradiation After preparation for (7) days to thermal neutrons emitted from the neutron source with activity (12Ci) and neutrons flux(5x105n.cm - 2.s - 1) fission fragments in the samples and recorded tracks on detector.Studied different etching times of these detectors and to reach optimized time by using the water bath for etching where Choose chemical solution (NaOH) with (6.25N) and a temperature (70oC) , and show that the time (70 min) the best etching time of the detectors affiliated to the blood samples and time (90min) the best etching time to detectors affiliated to the human tissues samples.This study showed that the highest value of the concentration of uranium in Normal blood samples (0.146ppm) and the lowest value (0.078ppm) with average (0.107ppm) and in Leukemia blood samples the highest value (0.121 ppm) and the lowest value (0.045 ppm) with average (0.085 ppm), but in the tissue samples the highest value of the concentration of uranium in the digestive system(0.068 ppm) and the lowest value(0.022 ppm) with average (0.044ppm) and in the urinary system the highest value( 0.06 ppm) and the lowest value (0.023 ppm) with average (0.047 ppm).
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: العربية
الدرجة: ماجستير
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: نضالة حسن كاظم العاني
اسم المؤلف: هدية حاتم نصيف

قياس تراكيز اليورانيوم والرادون في تربة بعض مناطق جنوب شرق بغداد باستخدام كاشف CR - 39 Measurment of Uranium and Radon Concentrations in Soil of Some Regions in South East of Baghdad Using Nuclear Track Detector(CR - 39

المستخلص: اجريت هذه الدراسة لتحديد تراكيز اليورانيوم وغاز الرادون في تربة بعض مناطق جنوب شرق بغداد (التويثة وعشتار والوردية وفلكة المدائن وجسر ديالى والرياض وسلمان باك ) .استعملت (35) عينة ترابية اخذت من (7) مناطق وبواقع خمسة اعماق لكل منطقة (سطح التربة,10cm, 20cm,30cm,40cm) للتعرف على مدى تلوث تلك المناطق باليورانيوم جراء العبث بالمصادر المشعة التابعة لمنظمة الطاقة الذرية بعد احداث الحرب على العراق عام ((2003 .تضمن الجزء الاول ايجاد تراكيز اليورانيوم في التربة باستخدام تقنية عد اثار شظايا الانشطار في كاشف الاثر النووي (CR - 39) الناتجة من قصف نوى اليورانيوم بالنيوترونات الحرارية من المصدر النيوتروني (Am241 - Be ) بفيض نيوتروني بلغ (5x103n.cm - 2.s - 1), اما الجزء الثاني فقد تضمن ايجاد تراكيز غاز الرادون في التربة باستخدام تقنية عد اثار جسيمات الفا المنبعثة من غاز الرادون في كاشف الاثر النووي (CR - 39). حددت تراكيز اليورانيوم وغاز الرادون بطريقة المقارنة مع النماذج القياسية ومن خلال النتائج المستحصلة نجد ان تراكيز اليورانيوم في عينات الترب كانت كالاتي : التويثة ppm (0.881±0.086),الوردية ppm(0.850±0.077) ,فلكة المدائن ppm(0.762±0.085) ,جسرديالى ppm(0.604±0.037),عشتار ppm(0.557±0.103) , الرياض ppm(0.465±0.171) ,سلمان باكppm (0.441±0.036) وقد بلغ معدل تركيز اليورانيوم لجميع المناطق ppm(0.651±0.180) .اما معدل تركيز غاز الرادون في عينات الترب لمنطقة الدراسة كانت كالاتي : التويثة Bq/m3(84.565±18.889),الورديةBq/m3(78.648±16.363),جسرديالى72.238±17.227) Bq/m3),عشتار Bq/m3 ((68.268±16.306, فلكة المدائن Bq/m3 (63.934±12.685), الرياض Bq/m3(59.097±10.777),سلمان باك Bq/m3(56.113±11.931) وبلغ معدل تركيز الرادون لجميع المناطق Bq/m3 ((68.980±10.297 اجري في هذه الدراسة ايضا تحديد معدلات الانبعاث السطحي والكتلي لغاز الرادون وقد اظهرت النتائج الحالية ان المعدلات العامة للانبعاث السطحي والكتلي لجميع مناطق الدراسة Bq/m2.hr(0.072±0.011) Bq/kg.hr(0.011±0.001) على التوالي . يلاحظ من خلال النتائج التي تم الحصول عليها ان تراكيز اليورانيوم والرادون في منطقة التويثة اعلى من بقية المناطق . | This study was done for measuring the concentrationsof (Uranium and Radon gas) in soil samples taken from South - East Baghdad(AL - Twitha, AL - Wardia, Madain Square, Jeser Diala , Ishtar , Hiay AL - Ryaid and Salman pak) .(35) soil samples are taken from (7) locations with five depths ranged from (soil surface ,10cm,20cm,30cm,40cm) to determine the level of concentration of these areas with Uranium .This contamination was due to the mis handeled of the radioactive sources of the Atomic Energy organization after the war Iraq in (2003).The first part consists the determination of Uranium concentration in soil samples using fission tracks registration in (CR - 39) detector obtained by the bombardment of (U) with thermal neutrons from (241AM - Be) neutron source has flux of 5x103n.cm - 2.s - 1 The second part concerns with the determination of Radon concentration in soil by using alpha - emitters registration wich emit from Radon gas in (CR - 39) detecor .The concentration values were calculated by comparison with standard Sample. The results showed that the concentrations of Uranium in study regions from South - East Baghdad were as the following : AL - Twitha (0.881)ppm , AL - Wardia (0.850)ppm , Madain Square (0.762) ppm ,Jeser Diala(0.604) ppm, Ishtar (0.557) ppm , Hiay AL - Ryaid (0.465) ppm ,Salman pak(0.441) ppm, the average of Uranium concentration in study regions(0.651±0.180) ppm . The Radon gas concentrations in study regions from South - East Baghdad were as the following : AL - Twitha (84.565) Bq/m3 ,AL - Wardia (78.648) Bq/m3 , Jeser Diala (72.238) Bq/m3, Ishar (68.268) Bq/m3 , Madain Square (63.934) Bq/m3,HiayAL - Ryaid(59.097)Bq/m3,Salman - pak (56.113)Bq/m3 The average Radon gas concentration (68.980±10.297)Bq/m3 .The results of the current study showed that the surface exhalation and mass exhalation rates of Radon gas in study regions(0.072±0.011) Bq/m2.hr (0.011±0.001)Bq/kg.hr respectively. This work shows the Uranium and Radon concentration in AL - Twitha is higher than the other regions
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: العربية
الدرجة: ماجستير
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: نضالة حسن كاظم العاني
اسم المؤلف: حلا محمد حمزة

تاثير استبدال Sr على بعض الخواص الفيزيائية للمركب Ba2 - xSrxCa2Cu3O7+? Effect of Sr Substitution on some of Physical Properties of (Ba2 - xSrxCa2Cu3O7+?) Compound.

المستخلص: لقد تم في هذه الدراسة تحضير المركب الفائق التوصيل Ba2 - x SrxCa2Cu3O7+δ ذا درجة حرارة حرجة عالية ولقيم x=0.0, 0.1, 0.2, 0.3, 0.5, 0.6 وباستخدام طريقة تفاعل الحالة الصلبة لغرض دراسة التغيرات الحاصلة في التركيب البلوري ودرجة حرارة التحول والخواص الفيزيائية والخواص العزلية.حيث تم فحص التركيب البلوري باستخدام تقنية حيود الاشعة السينية (XRD) واوضحت نتائج تحليل حيود الاشعة السينية ان جميع العينات للمركبات المحضرة لها تركيب معيني متعامد المحاورويمتلك اطوارتركيبية رئيسية عالية ومنخفضة مع تغير ثوابت الشبيكة ونسبة c/a والكثافة الكتلية والنسب الطورية نتيجة لزيادة تركيز Sr . اما قياسات السطح فتمت باستخدام المجهر الالكتروني حيث اظهرت صور المجهر الالكتروني الماسح ان العينات لها ترتيب طبقي متجانس ثم ان زيادة تركيز Sr ادى الى تغير الاحجام الحبيبية .واشارت النتائج الى ان هناك زيادة في محتوى الاوكسجين نتيجة زيادة نسبة Sr المضافة للمركب من خلال الزيادة في محور c والذي بدوره يؤثر على مقدار Tc للمركب .اما المقاومة الكهربائية فتمت دراستها باستخدام تقنية الاقطاب الاربعة وتم ايجاد درجة الحرارة الحرجة Tc للمركبات الفائقة التوصيل من خلال منحنيات اعتماد المقاومية الكهربائية على درجة الحرارة وقد تبين ان اعلى نسبة درجة حرارة حرجة للمركب الفائق التوصيل Ba2 - xSrxCa2Cu3O7+δ Tcoff=140k وباستخدام مقياس ال LCR فقد تم قياس ثابت العزل الكهربائي كدالة للتردد ضمن المدى من 50Hz الى 1MHz في درجة حرارة الغرفة. وقد وجد ان زيادة تركيز Sr يؤدي الى تغير في ثابت العزل الكهربائي .اما بالنسبة للخصائص الفيزيائية فاوضحت النتائج ان زيادة نسبة Sr ادت الى زيادة في المسامية يقابلها نقصان في التقلص الحجمي والكثافة.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: دكتوراه
الموضوع الدقيق: الفيزياء
السنة: 2017
الموضوع العام: علوم الفيزياء
اسم المشرف: سوسن عبد الحسين مهدي
اسم المؤلف: حسين عبد الوهاب توفيق

ثابت العزل الكهربائي الفعال للسليكون العشوائي النقطي الكمي Effective Dielectric Constant of Amorphous Silicon Quantum Dots

المستخلص: تركز هذا العمل على دراسة الحسابات النظرية لثابت العزل الكهربائي للسليكون العشوائي ذو النقاط الكمية ولحجوم تتراوح من (1,8 - 4,8) نانوميتر. الحسابات النظرية اظهرت بان قيم ثابت العزل الكهربائي للنقاط الكمية من السليكون العشوائي قد انخفضت. اعتماد ثابت العزل الكهربائي على التردد الساقط تحقق في هذه الدراسة. التصغير لشبه الموصل الصلب وصولا الى المقياس النانوي يجعل التاثير الكمي اكثر اهمية. وكنتيجة لذلك فان فجوة الطاقة لشبه الموصل النانوي تتوسع, وتصبح هنالك ازاحة لمستويات اللب, وتعديل لعرض الحزمة كذلك ازدياد الانفصال بين المستويات الثانوية داخل الحزمة. الاخماد لثابت العزل الكهربائي ينشا من تعزيز الربط البلوري وارتباط الالكترون مع الفونون بسبب نقائص عدد الاحداثيات الذرية وارتفاع نسبة السطح الى الحجم مع انخفاض حجم الجسيم النانوي. الاخماد في قيمة ثابت العزل الكهربائي يقودنا الى الازاحة نحو الطاقات العالية في حافة الامتصاص الفوتوني وكذلك الانبعاث الفوتوني والتي نجد تطبيقاتها في النبائط المايكروالكترونية والفوتونية ذات المقاييس النانوية. وبواسطة هذه الحسابات فقد اعتمدنا فكرة التقييد الكمي, حيث ان فجوة الطاقة لشبه الموصل تتطابق مع حجم النقاط الكمية من السليكون العشوائي. التركيب للجسيم النانوي قسم الى ثلاث قشرات (طبقات) والتي هي طبقة السطح وطبقة السطح الثانوي وطبقة اللب, حيث ان طول الاصرة وطاقة الاصرة وعدد الاحداثيات تختلف باختلاف القشرات. الاصرة تنكمش وطاقتها تزداد في طبقة السطح اما في طبقة السطح الثانوي فان الاصرة تنكمش قليلا ولكن طاقتها لاتتغير بينما في طبقة اللب فان كلا من طول الاصرة وطاقتها هي نفسها كما لو كان الحجم غير نانوي, بالاضافة الى ذلك في هذا الانموذج نجد ان انكماش طول الاصرة وزيادة طاقتها يزداد مع زيادة النقص في عدد الاحداثيات الذرية. استخدم لحسابات هذه الدراسة الحقيبة البرامجية Mathcad Professional 2015. | In this work, theoretical calculations of amorphous silicon quantum dots of (1.8~4.8 nm ) have been studied. The presented calculations shows that the dielectric constant of amorphous silicon quantum dots are suppressed. The frequency dependence of the dielectric constant was investigated. When the solid is miniaturized, quantum effects become, significantly important. As a results, the bandgap of a nanosemiconductor is extensions, the core levels will be shifted, the revision to width for band, and increasing split of sublevel inside the band. Dielectric extinction arises from the promotion of the binding energy to crystal and e - p reaction owing to coordination number diminution and the high in proportion of surface into volume with reduction of the size to the particles. A reduction for dielectric tendency to the brinks for photo - absorption and photoemission are a blueshifted, that might found applications in micro - electronic and photonic devices build on nanometric gauge. With the suggested calculations, effect of quantum confinement was a doped, the bandgap for nanosemiconductor could be governed with the size of amorphous silicon quantum dots. The structure of the nanoparticles was classified into three shells, i.e., the surface, the subsurface and the core, where the bond length, bond energy and coordination number are different. Bonds contract and the energy increase in the surface shell. In the subsurface shell, the only bond contract with a little but the energy unchanged, whereas the bond length and the bond energy are remain the same as the bulk in the core of particle. In this model the bonds contract and the energy increase with the increasing of atomic coordination number imperfection. All the calculations made in this work have been done using Mathcad Professional 2015.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: دكتوراه
الموضوع الدقيق: الفيزياء
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: موفق كاظم عبد الرضا
اسم المؤلف: حسين خضير مجبل

الخصائص الكهربائية والبصرية لمتراكبات بوليمر - نحاس Electrical and Optical Properties of Polymers - Cu Composites

المستخلص: في هذه الدراسة، تم تحضير نوعين من المتراكبات (Cu - PMMA)و(Cu - Epoxy) باستخدام طريقة الصب مع نسب وزنية مختلفة من جسيمات النحاس(Cu). وقد تم تشخيص النماذج للمتراكبات بطرق مختلفة مثل صور المجهر الضوئي وصور المجهر الالكتروني الماسح (SEM) والتحليل الطيفي للاشعة تحت الحمراء (FTIR) وحيود الاشعة السينية(XRD). وتمت دراسة الخصائص الكهربائية المستمرة والمتناوبة (C.D وC.A) للمتراكبات والخصائص البصرية ضمن اطوال موجية تتراوح بين (200 - 1100) نانومتر. صور المجهر الضوئي توضح توزيع جسيمات النحاس لنماذج المتراكبات (Cu - PMMA) وتبين تكون شبكه مستمرة داخل البوليمر عند النسبة الوزنية ( %.wt 60) من النحاس, بينما نماذج المتراكبات (Cu - Epoxy) لم نستطع الحصول على اي صورة لها لان هذه النماذج سميكة ومعتمة. وقد تم دراسة مورفولوجية السطح للنماذج باستخدام تقنية المجهر الالكتروني الماسح (SEM), والذي اظهر توزيع المضاف على السطح وزيادة خشونة السطح مع زيادة نسبة النحاس. وقد تم فحص طيف (FTIR) للنماذج واظهر انواع الاواصر لكل من البولمر والمتراكبات, واظهرت هذه الدراسة ان اضافة (النحاس) لم تؤثر على التركيب الكيميائي للبولمر. واظهرت النتائج التجريبية (XRD) تحويل النماذج من شبة بلورية الى بلورية بسبب زيادة نسبة جسيمات (النحاس). وقد اظهرت النتائج الكهربائية المستمرة (D.C) ان التوصيلية الكهربائية المستمرة (σD.C) للنماذج ذات النسب الوزنية الواطئة تزداد بزيادة درجة الحرارة, اي المقاومة الكهربائية لهذه النماذج تكون ذات معامل حراري سالب, وعند النسبة الوزنية ((%.wt 60) للمتراكبات (Cu - PMMA) و(%.wt 25,30, 40) للمتراكبات (Cu - Epoxy) تقل توصيليتها الكهربائية المستمرة (σD.C) بزيادة درجة الحرارة, اي المقاومة الكهربائية لهذه النماذج تكون ذات معامل حراري موجب. وان طاقة التنشيط تقل مع زيادة النسبة الوزنية للنحاس. اما في ما يتعلق بالخواص الكهربائية المتناوبة (C.A) فان ثابت العزل(ԑˈ) والفقدان العزلي (ԑ") للنماذج تتناقص مع زيادة تردد المجال الكهربائي المسلط وانها تزداد مع زيادة تركيز جسيمات (النحاس), وتزداد التوصيلية الكهربائية المتناوبة (σ_(A.C)) مع زيادة تركيز جسيمات (النحاس) والتردد، وثابتة تقريبا في الترددات العالية. اظهرت نتائج الخصائص البصرية للمتراكبات (Cu - PMMA) ان الامتصاصية ومعامل الامتصاص ومعامل الخمود ازدادت وان فجوة الطاقة للانتقال غير المباشر المسموح تناقصت مع زيادة النسبة الوزنية للنحاس. بينما الثوابت البصرية الاخرى لم نستطيع الحصول على نتائج لهذه المعاملات لان الامتصاصية عالية جدا. اما المتراكبات (Cu - Epoxy) لم نستطيع الحصول على اي خصائص بصرية لها لان هذه النماذج سميكة ومعتمة | In this study, two types of composites have been prepared : (PMMA - Cu) and (Epoxy - Cu) by using casting methods with different weight percentages of copper particles (Cu). The composites samples have been diagnosed by different methods such as optical microscope images, scanning electron microscope images (SEM), Fourier transformation infrared (FTIR) spectroscopy and X - ray diffraction (XRD). The electrical properties (D.C and A.C) of composites and optical properties of wavelengths range (200 - 1100) nm were studied. The images of optical microscope shows distribution of copper particles for (PMMA - Cu) composites samples and shows a continuous network inside the polymer at the ratio (60wt.%) of )Cu), while the (Epoxy - Cu) composites samples we cannot get any images because these samples are thick and dark. The morphology of samples have been studied using (SEM) technique, which showed grain distribution at surface morphology and grain aggregates with increasing of copper particles. The FTIR spectrum of samples were measured and shown the type of bond for polymer and composites. This study showed that the addition of (Cu) did not affect on the chemical structure of polymer. The experimental results (XRD) showed the samples transmutation from semicrystalline to crystalline because increased ratio particles of (Cu). The results show that the (D.C) electrical conductivity increases with increasing the temperature at low concentrations, where electrical resistance for these samples have a negative thermal coefficient, at (60 wt.%) of (PMMA - Cu) and (25,30,40 wt.%) of (Epoxy - Cu) composites (D.C) electrical conductivity decreases with increasing temperature, where electrical resistance for these samples have positive thermal coefficient. The activation energy decreases with increasing weight percentage of (Cu). The (A.C) electrical properties shows that the dielectric constant (ԑˈ) and dielectric loss (ԑ") of the samples decreased with increasing the frequency of applied electrical field and they increase with the increase of the concentration of (Cu). The A.C electrical conductivity (σ_(A.C)) increases with increasing the concentration of (Cu), increases with the increase frequency, and almost constant at high frequency. The results of optical measurements of the (PMMA - Cu) composites show that the absorbance, absorption coefficient and extinction coefficient increase and the energy gap of the indirect allowed transition decreases with the increasing weight percentage of (Cu), while the other optical constants we cannot get the results for these parameters because the absorbance is very high. The (Epoxy - Cu) composites we cannot get any optical properties because of these samples are thick and dark.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: اسرار عبد المنعم سعيد
اسم المؤلف: حسنين عبد الحسين جاسم الغالبي

تحضير تراكيب نانوية للزنك اوكسيد بطريقه السول - جيل

المستخلص: تم في هذا البحث دراسة الخصائص التركيبية ,البصرية ,الكهربائية والتحسسية للاغشية (ZnO) النقية والمشوبة بالسيريوم (Ce) بالنسب % (3,5,10) المحضرة بطريقة السول - جيل, والتي رسبت بطريقه السبن كوتنك على قواعد زجاجية وملدنه عند درجات الحراره (350,500,550˚C) للاغشيه النقيه و(˚C550 ) للاغشيه المشوبه وبسمك (315.5)nm.بينت فحوصات نمط الحيود للاشعة السينية (XRD) لتشخيص طبيعة تبلور الاغشية المحضرة, حيث اظهرت النتائج ان جميع الاغشية المحضرة ذات تركيب متعدد التبلور من نوع سداسي hexagonal)), كما تبين من نتائج التشويب ان زيادة التشويب تؤدي الى النقصان في الحجم الحبيبي حيث تناقص الحجم الحبيبي من (37.1) الى (27.0) في حالة التشويب بنسبة ,10%, ومن خلال قياسات ماسح القوة الذرية AFM تبين ان خشونه السطح تزداد بزياده نسب التشويب من القيمه (1.14) الى القيمه 2.15)) عند النسبه 10 % ,ومن قياسات المجهرالالكتروني الماسح SEM تم التعرف على نوع التراكيب ففي الاغشيه النقيه ظهرت التراكيب ذات جسيمات نانويه كرويه الشكل موزعه بصوره منتظمة ومتجانسة ,بينما الاغشيه المشوبه كانت التراكيب الناتجه شبيه بالالياف وعلى شكل شبكه تجاعيد (متغصن ). وقد تم دراسة الخواص البصرية لاغشية اوكسيد الزنك النقية (ZnO) والمشوبة بالسيريوم (ZnO : Ce) على دراسة طيف النفاذيه (T᷊) لاغشية المحضرة حيث بينت النتائج ان اعلى نفاذيه تم الحصول عليها هي(95%) عند الاغشية النقيه بينما كانت النفاذيه للاغشية المشوبة %(65 - 40) ولمدى اطوال موجيه350 - 900) nm.) , وتبين ايضا ان الامتصاصية بشكل عام تزداد بزيادة نسب التشويب لتصل اعلى قيمة عند النسبه10% بزيادة نسبة التشويب. تم حساب فجوات الطاقة البصرية للاغشية النقيه والمشوبه وتبين ان فجوة الطاقة تزداد قليل بزيادة نسبة التشويب الى ان تصل الى اعلى قيمة عند نسبة التشويب (10%). وكانت فجوة الطاقة ( (Eg تتراوح من (3.219 eV) الى (3.232eV) بزيادة نسب التشويب. اظهرت القياسات الكهربائية ان التوصيلية الكهربائية المستمرة تزداد بزيادة نسبة التشويب ثم تقل عند النسبه 10 % مع زيادة نسبة التشويب . وبينت القياسات ان الاغشية كافة تمتلك طاقتين للتنشيط (Ea1) و(Ea2) تقل قيمتهما بزيادة نسبة التشويب. كما بينت خصائص(photoconductivity) ان الاغشيه تمتلك ربحيه مقدارها (2.357) للاغشيه النقيه و(1,1.666,1)للاغشيه المشوبه عند النسب (3,5,10 )%على التوالي . اما خصائص التحسسية لجميع الاغشية المحضره كانت تقاس بعد تعريضها الى ( (100,150,200 ppm) من ال( NH₃و( NO₂ عند درجه حراره الغرفه . النتائج العملية بينت ان اغشية اوكسيد الزنك المشوبة بالسيريوم والمرسبة على قواعد زجاجية تحسن التحسسية لتلك الاغشية للغاز ( NH₃و ( NO₂ كما تبين ان افضل نتيجة سجلت كانت للاغشية المشوبة بنسبة 10 % حيث كانت (17%) للغاز NO₂ و(16.66%)للغاز NH₃عند 300 درجه مئويه في حين كانت افضل نتيجه للاغشيه المشوبه بنسبه (%3 و%5) حيث كانت (12.6 %) للغازNO₂ و(10.31%) للغاز ,NH₃ 14%)) للغاز NO₂ و(13.28 %) للغاز NH₃ على التوالي عند 200 درجه مئويه . بالاضافة الى ذلك تبين ان التحسسية لها علاقة نسبية لدرجات الحرارة وكمية الغاز. | In the present work, structural, optical, electrical and sensing properties have been studied for undoped and Ce doped zinc oxide (ZnO) thin films with different cerium doping concentrations (3 ,5 and 10) % prepared by a Sol - gel method with spin coating , deposited on glass substrate at annealing temperature (350,500 and 550 )˚C for the pure thin film , 550 ˚C for doped thin film with (350±10) nm thickness, The X - ray diffraction technique has showed that all prepared films are polycrystalline structure type of hexagonal wurtzite, The doping resulted in decreasing grain size deteriorates the crystalline of the films from (37.1nm) of pure ZnO to (27nm) of ZnO : Ce at (10 %) doped. Surface analysis by AFM have been, the roughness increased with increasing the cerium concentration in the films from (1.14) to (2.15) at 10 % , From FE - SEM have been identified the structures in the thin film pure, spherical nanoparticles distributed a regular basis and homogeneous, while doped thin film were shapes like fiber and a wrinkle network. The measurements of optical properties transmittance of undoped and Ce doped ZnO films showed higher transmittance was (95%) for undoped ZnO films while (65 - 40% ) for doped Ce films within wavelength range (350 - 900nm). In addition, the results have showed the absorbance increased with increased doping to reach maximum value at 10% concentration. The energy gap of ZnO was calculated for undoped and doped films .It is noticed that the energy gap increases slowly with the increased of doping until it reaches the highest value at 10% doping concentration , and the energy gap ranging from (3.219) to (3.232) with increased doping concentration.The results of electrical properties have showed that direct current (D.C) conductivity increases then decreases by increasing doping to reach maximum value at 10% doping concentration. The results have showed that the films have two activation energy Ea₁ and Ea₂. From (photoconductivity) characteristics it has found that the gain factor (2.357) for pure ZnO and (1, 1.666, 1) for ZnO : Ce at (3, 5 and 10) % Respectively.The sensing properties for all undoped and Ce doped films were measured after films surface was exposed to (100,150 and 200) ppm for NH₃, NO₂ gas at room temperature. The experimental results of Ce doping of zinc oxide thin films with different cerium doping concentrations (3,5 and 10) % which deposited on glass substrate ,sensitivity of thin film sensor elements was investigated in this work. Therefore that the sensitivity of all the samples increases with the increasing in the operating temperature, reaching a maximum value corresponding to an optimum operating temperature which is 300°C for sample (10 %) and 200 °C for samples (3 % ,5 %). In addition ,the sensitivity is directly proportional with the operation temperature for limited range. In general , the sensitivity increases by increasing the concentration of NH₃, NO₂ with increasing temperature degree.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الجامعة: جامعة بغداد
الدرجة: ماجستير
الموضوع الدقيق: الفيزياء
السنة: 2014
الموضوع العام: علوم الفيزياء
اسم المشرف: رعد سعدون صبري محمد جاسم محمد حسن
اسم المؤلف: تغريد سعدون محسن

فقدان الطاقة وايقاظ الجهد للبروتون في البلازما Energy loss and wake potential of proton in plasma

المستخلص: تم دراسة صيغة قدرة الايقاف وايقاظ الجهد في البلازما الكلاسيكية باستخدام نماذج (Vlasove and Fried - Cont) بالاعتماد على دالة تشتت العزل ((∈(k,ω))) للايونات المتصادمة (المنفردة، العناقيد والعناقيد الثنائية) ولمعاملات مختلفة. يتضمن العمل ثلاث دراسات تعتمد على الايقاف وايقاظ الجهد. يصف هذا النموذج تاثير فقدان الطاقة للايونات المنفردة والجماعية على ثلاث منظومات مختلفة (Tokamak, Z - pinch and ICF). كذلك تم دراسة تاثير التركيب الهندسي لفقدان الطاقة وايقاظ الجهد للبروتون الساقط على نفس المنظومات السابقة ولحالات مختلفة. وتم برمجة كل المعادلات بواسطة برنامج (Fried - Conte.for.) بلغة فورتران 90. ان تحسين قدرة الايقاف في حالة البروتون المترابط اعطت نتائج افضل من البروتون المفرد بسبب ظهور تاثير التداخل في الحالة الاولى. وكذلك عند زيادة المسافة بين الجسيمة المقذوفة والهدف فان الايقاف يقل بسبب ما تعانية القذيفة من فقدان للطاقة في مسارها. كذلك عند تسقيط القذائف داخل وخارج كرة ديباي فان فقدان الطاقة يقل في حالة (R<λ_D) بسبب تاثير كولوم والعكس صحيح. تم دراسة تاثير الزوايا على فقدان الطاقة للبروتون عند تصادمه بزوايا (0, 30, 60, 90) وعلى ثلاث منظومات فلاحظنزايادة في فقدان الطاقة مع ازدياد قيمة الزوايا، وهذا يعني ان افضل ايقاف عند الزاوية (π⁄2). اعتمدت نظرية (Bohm and Pines) لغرض التحقق من تاثيرات الايونات المنفردة والجماعية على فقدان الطاقة في البلازما واستخدمت الطرق العددية في التكاملات والتقريبات التحليلية للسرع الواطئة والعالية باعتماد الحالات الكلاسيكية والكمية، فلوحظ اختلاف بالنسب المئوية بين المنظومات بسبب الاختلاف في الكثافة والسرعة الحرارية بينها. كما تم دراسة تاثير التداخل على فقدان الطاقة لمنظومات البلازما الثلاثة، وذلك لكثافات ودرجات حرارة مختلفة لهذه المنظومات، والتي اظهرت ان توزيعات الانماط الجماعية تقل مع درجة الحرارة وتزداد مع الكثافة. تم حساب ايقاظ الجهد للايونات المتصادمة في البلازما باستخدام كثافات مختلفة لمنظومات البلازما الثلاثة. فتبين وجود زيادة في ايقاظ الجهد مع الكثافة لكل منظومة. وتمت دراسة تاثير التركيب الهندسي واخذ شكل المثلث لمعاملات مختلفة (طول ديباي، ارتقاع المثلث وطول قاعدة المثلث) من تاثير طول ديباي على المنظومات الثلاث نجد ان فقدان الطاقة يقل مع زيادة طول ديباي. اخذنا حالات عديدة عند دراسة تاثير التركيب الهندسي على ايقاظ الجهد (قذيفتان متتاليتان، قذيفة تقود خلفها قذيفتان وقذيفتان تقود خلفها قذيفة) فوجدنا ان منظومة (Z - pinch) اكثر تماثلا من (Tokamak وICF). | In the present work the expression of the stopping power and wake potential in classical plasma are study by using Vlasove and Fried - Conte models depending on dielectric dispersion function (∈(k,ω)) for incident ions (single, clusters and diclusters) at different parameters. The work includes three studies depending on stopping and wake potential, this model describe the energy loss of individual ions and collective effect on three plasma systems (Tokamak, Z - pinch and ICF), where ICF is inertial confinement fusion. So study effect the geometrical structure of energy loss and wake potential of incident proton on the same three systems in different cases. All equation programed by Fried - Conte.for. written in Fortran - 90. The enhanced stopping power in case correlated proton best than the point - like because appear the interference effect in the first case. As well when increases the distance between incident projectile and target the stopping decreases, because the projectile suffer more collisions. So when incident projectiles (inside and outside) Debye sphere, energy loss decreases in case (R<λ_D) because of coulomb effect, vice versa. As well study effect the angles on the energy loss, where incident proton in different angles (0, 30, 60 and 90) on three systems note increases the energy loss with angle. This mean the best stopping at (π/2). Depending on Bohm and Pines theory to investigation the effect of individual and correlated ions of energy loss in plasma. Using the numerical method to integral, and analytical approximations for low and high velocities depending on the classical and quantum cases, note the different in scale percentage between systems because the difference in density and thermal velocity between them. The Interference effect in the energy loss for three plasma systems. By using different densities and temperature, show that the Contribution of collective modes decreases with temperature and increases with density. The wake potential of incident ions in plasma calculated by using different densities for three plasma systems. The wake potential increase with density for each system. As well study effect the geometrical structure and take the form of a triangle for different parameters (Debye length, height of a triangle and length of the triangle base). From effect Debye length (λ_D) for three plasma systems the energy loss decreases with increases the Debye length. Several cases taking in to account when study the effect of structure on wake potential, (Two - collinear projectiles, Projectile leading two behind and two projectiles leading one behind). Note the plasma system (Z - pinch) it’s the more systematic than (Tokamak and ICF) systems.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: دكتوراه
الموضوع الدقيق: فيزياء البلازما
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: خالد عبد الوهاب احمد رياض خليل احمد
اسم المؤلف: بيداء محسن احمد

دراسة نظرية لمستويات طاقة النظائر ( - 2^6)[He] - 4 , ( - 9^18) F - 9 , ( - 15^30) P - 15 بالاعتماد على usda ,usdb ,usd باستخدام حسابات انموذج القشرة النووي Theoretical study of energy levels for (_2^6)?He?_4 , (_9^18)F_9 and (_15^30)P_15 Isotopes depending on USDA,USDB and USD using shell model calculation

المستخلص: باستعمال حسابات انموذج القشرة النووي لتقيم مستويات الطاقة . مصفوفة العناصر النووية للتفاعل المؤثر لنيوكليونين اشتقت لجهود USD,USDB,USDA لوصف التفاعل للنيوكليونات وفقا لفضاء انموذج التشكيل للنوى ولحساب طاقات الربط والتهيج النووي . ووفقا لنظرية الاضطراب حسبت طاقة المستويات على افتراض وجود نيوكليونين بروتون ونيوترون خارج القلب المغلق وصفت وفقا لجهود USD,USDB,USDA العالمية . الحسابات اتمت باستعمال طاقة الجسيمة المفردة لتفاعل النيوكليونات خارج القلب المغلق ولثلاث انظمة , طاقة المستويات حسبت اعتمادا على مبدا الاختيار للزخم الزاوي والبرم النظائري T=0,T=1 لدوال الموجة غير المتناظرة للنيوكليونات . نتائج الحسابات اتمت باستعمال حزمة الماتلاب لحساب مستويات الطاقة مع قيمة عملية ونظرية لطاقة الجسيمة المفردة ونتائج الحسابات قورنت مع القيم العملية لمستويات الطاقة ولوحظ توافق جيد مع القيم العملية | The nuclear structure for low lying energy states of isotopes (_2^6)He_4 , (_9^18)F_9 , and (_15^30)P_15 nuclei have been investigated and studied using shell model depending on the evaluation of the energy levels . Nuclear matrix elements for the effective interaction of two - nucleons have been derived for the USD,USDA and USDB potential to describe the interaction of the nucleons at configuration model space for nuclei to evaluate the binding and excitation energy. According to the perturbation theory , evaluation energy levels with assume two nucleons one proton and one neutron out the closed inert core. The interaction of the nucleons out the closed core describe by USD,USDA and USDB universal potential .the calculations have been performed using single particales energy for nucleons interactions out the closed core in three system.The energy levels are computed depending on the selection rule of angular momentum and the isospin T=1and T=0 for antisymmetric wave functions for nucleons. Their results has been employed using Matlab software to evaluate the energy levels with experimental and theoretical single particle energies. The results data are compared with experimental energy levels which show good agreement
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: احمد موسى اشويخ
اسم المؤلف: ايوب طالب عبد داغر