Show: 25 50 75 100 Results

Search results: 25 out of 4,463

محاكاة لخصائص الهوائيات الكسورية المكونة من الميتاماتيريل == Simulation of Fractal Antenna Properties Composed of Metamaterials

Author name: عمار نضال شريف
Supervisor name: عامر باسم شعلان
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: الميتامتيريال او المواد ذات معامل الانكسار السالب هي مواد صناعية . تمتلك هذه المواد خصائص مثل معامل الانكسار السالب وهي خصائص غير موجودة في المواد الطبيعية. الميتامتيريال التي تم تصميمها من خلال وضع المرنانات الكهرومغناطيسية مثل المرنانات الحلقية المنفصلة (SSR) في مجموعة دورية من بين التصاميم الاكثر انتشارا. المرنانات الحلقية عند وضعها بالقرب من الهوائيات كغطاء فانها سوف تحسن معامل الكسب للهوائي. وعند حفر هذه المرنانات على سطح الهوائي فانها تؤدي الى تقليل حجم الهوائي. اصبحت الهوائيات المطبوعة من اكثر الهوائيات شيوعا وذلك لامتلاكها العديد من الخصائص مثل صغر حجمها وقلة وزنها وسهولة تصنيعها بكلفة قليلة. ان تصميم الهوائيات المطبوعة باستخدام اشكال الهندسة الكسورية اكسبها تحسين في خصائص الهوائي. في هذه الاطروحة تم تصميم ستة اشكال كلاسيكية واربعة اشكال كسورية لخلايا الميتامتيريال وتم حساب المعاملات الخاصة بها باستخدام طريقة الاسترجاع بواسطة برنامج (HFSS) المخصص لمحاكاة النماذج الكهرومغناطيسية. السماحية والنفاذية ومعامل الانكسار السالب تم حسابها وقد اظهرت هذه الخلايا تصرفا مشابها لتصرف المواد اليسارية عند ترددات الرنين العائدة لها. دراسة تاثير خلايا الميتامتيريال على خصائص الهوائيات يقع على شقين ، تحسين معامل الكسب وتقليل حجم الهوائي. غطاء الميتامتيريال الذي يتكون من خلايا كلاسيكية الشكل او خلايا كسورية الشكل تم وضعه فوق نماذج الهوائيات، كوخ الرباعي وبيانو ونتفة الثلج. تم الحصول على نتائج جيدة من تحسين معامل الكسب وتقليل الفصوص الجانبية في شكل المجال للهوائي. ان مقدار التحسين في بعض النماذج والتي تمتلك غطاء مكون من خلايا كسورية الشكل يصل الى 5 ديسيبل. ان المرنان الحلقي تم حفره على سطح الهوائي بيانو اما المرنان الحلقي على شكل هلبرت الكسوري فقد تم حفره على المستوي الارضي لهوائي نتفة الثلج. نتائج جيدة من تقليل الحجم تم الحصول عليها حيث ان مقدار التقليل بالحجم لهوائي بيانو وصل الى 41%. ان الهوائي كوخ الرباعي وهوائي بيانو تم دراستهم عمليا حيث تم تصنيعهم واجراء القياسات لهم باستخدام جهاز محلل شبكة النواقل. وتم الحصول على نتائج عملية متوافقة مع النتائج النظرية. في الدراسات المستقبلية سيتم دراسة اغطية الميتامتيريال لاكثر من طبقتين وبزوايا مختلفة نسبة الى مستوي الهوائي | Metamaterials or left - handed materials are man - made structures. They have properties like negative refractive index that is not found in natural materials. Metamaterials that is designed by placing electromagnetic resonators like split ring resonators (SRRs) in a periodic array is among the most popular designs. Split ring resonators when placed next to antennas as a cover, it will improve the gain of the antenna. Split ring resonator when slotted on patches, it causes a size reduction. Microstrip patch antennas have become one of the most popular antennas because they have many advantages such as low - profile, light weight, and low cost of fabrication. Designing of microstrip patches are utilized from fractal geometry. Fractal shapes exhibit antennas more improved in its parameters.In this thesis, six classical and four fractal unit cell metamaterials are designed and their parameters are calculated using retrieval method by HFSSV13 code for electromagnetic structure simulation. Permittivity, permeability, and negative refractive index are calculated. These shapes show left - handed behavior in their resonance frequencies.The study of effect of metamaterial unit cells on antenna parameters lies in two categories, gain enhancement and size reduction. Meta - cover of classical and fractal unit cells is placed above Quadruple Koch, Peano, and Snowflake antennas. Good results of gain enhancement and side lobe reduction are obtained. Enhancement of some models of fractal meta - cover equals 5 dB. Split ring resonator and Hilbert ring are slotted on antenna patch and ground plane of the antenna respectively. Two models are proposed, First iteration of Peano and Snowflake antennas. A good result of size reduction is obtained. The reduction in Peano antenna equals to 41%. Quadruple Koch and Peano antennas are studied experimentally. These models are fabricated and measured using vector network analyzer. Good agreement of measured and calculated results is obtained. In the future work more than two layers will be investigated with different angles relative to the antenna plane

تاثيرات الاشعاع على الخصائص البصرية لاغشية صبغة مثيلين ازرق المطعمة بpva == Radiation Effects on Optical Properties of Methylene Blue Dye Doped PVA Films

Author name: عمار نجم عبد
Supervisor name: محاسن فاضل هادي الكاظمي
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: اجري هذا البحث على مرحلتين, الاولى هي دراسة الخصائص البصرية والتركيبية لاغشية صبغة المثلين الازرق(Methylene blue) المطعمة ببوليمر بولي فينيل الكحول(PVA) وبنسب تطعيم مختلفة وهي (10, 15, 20, 30, 40) مل من محلول الصبغة وبتركيز(1*10 - 5) مول/لتر. كل النماذج حضرت بطريقة الصب والمرحلة الثانية هي تشعيع هذه الاغشية باشعة كاما وبيتا وبجرع مختلفة ودراسة تاثير انواع التشعيع على الخصائص البصرية والتركيبية لها.حيث وجد ان طيف الامتصاص يزداد بزيادة نسب التطعيم لكل من قمتي الصبغة والبوليمر مع وجود ازاحة باتجاه الاطوال الموجية الاطول (ازاحة حمراء), وتم دراسة فجوة الطاقة البصرية ووجد ان فجوة الطاقة الطاقة للبوليمر تتناقص مع زيادة نسب التطعيم مع ثبات فجوة الطاقة للصبغة وقد تم دراسة الثوابت البصرية الاخرى والتي تشمل (معامل الامتصاص, معامل الخمود, معامل الانكسار, وثابت العزل الكهربائي الحقيقي والخيالي).بعد تشعيع غشاء البوليمر النقي واغشية الصبغة المطعمة بالبوليمر ولمختلف نسب التطعيم باشعة كاما وجسيمات بيتا وجد ان هناك زيادة ملحوضة لطيف امتصاص البوليمر النقي بينما طيف الامتصاص هذا يتناقص لاغشية الصبغة المطعمة بالبوليمر وتعاني ازاحة باتجاه الاطوال الموجية الاصغر (ازاحة زرقاء) مع بقاء قمة امتصاص البوليمر على حالها, اما فجوة الطاقة فقد تناقصت بعد التشعيع للبوليمر وازدادت للصبغة لمختلف الاغشية وقد تم دراسة الثوابت البصرية الاخرى والتي تشمل (معامل الامتصاص, معامل الخمود, معامل الانكسار, وثابت العزل الكهربائي الحقيقي والخيالي).اما الفحوصات التركيبية فقد بين كل من حيود الاشعة السينية (XRD) وطيف (FTIR) عدم وجود تفاعل كيميائي بين الصبغة والبوليمر بعد الخلط وعدم تكسر الاواصر الاساسية لهما بعد التشعيع, واظهرت صور (FESEM) تعرض سطح البوليمر للتكسر وازدادت خشونتة بعد التشعيع بينما لم تتاثر كثيرا سطوح الاغشيه المطعمة من الصبغة والبوليمر بالتشعيع | The present work was carried out in two stages .The first stage was studying the optical and structural properties for methylene blue dye doped poly vinyl alcohol as a host polymer in different doping ratio of dye solution (10, 15, 20, 30, 50) ml with concentration of dye (1×10 - 5) mol/liter. All samples prepared by casting method. The second stage was irradiated all samples by Gamma ray and Beta particles in different doses and studying the optical and structural properties for them. The intensity of absorption spectrum increased with increasing doping ratio of dye solution for peaks of dye and polymer and gave red shift. The optical energy gap for PVA increased with increasing doping ratio of dye solution with remaind the energy gap for dye constant. The optical constants (Absorption coefficient, Extinction coefficient, Refractive index, Real and imaginary dielectric constants) was studied. After Gamma and Beta irradiation pure PVA film and MB/PVA films with different doping ratio of dye solution and found that the absorption spectrum increased for pure polymer, while the absorption spectrum for dye is decreased for MB/PVA films and gave blue shift with remained the absorption peak of polymer constant. The optical energy gap for PVA decreased whereas the energy gap for dye increased after irradiation. The optical constants (Absorption coefficient, Extinction coefficient, Refractive index, Real and imaginary dielectric constants) was studied. The XRD and FTIR showed no interaction between dye and polymer after doping and there are no broken fundamental bands after irradiation. FESEM photographs illustrated that the surface of all films became more roughness after irradiation.

تاثر اشعة كاما المرتدة بكثافة المواد غير المتجانسة باستخدام طريقة مونت كارلو == The Effect of the Density of an Inhomogeneous Material on Gamma Backscattering Using Monte Carlo Method

Author name: عل نعمة محمد
Supervisor name: علاء باقر كاظم
General topic: Physics
Specific topic: Atomic Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: في البحث الحالي، تم تصميم وكتابة برنامج محاكاة حاسوبي بالاستناد على تقنية الفوتونات المرتدة وطريقة مونت كارلو ليكون منظومة عملية افتراضية، عوضا عن المنظومة العملية الحقيقية، في مجال الاختبارات اللااتلافية لتراكيب المواد المتاكلة (المتصداة). ولهذه المحاكاة القابلية على تحليل توزيع الطاقات للفوتونات التي تصل للمنظومة الكشفية بعد ان تعاني عدة استطارات في مادة الهدف. ۇجد انﱠ عدد الفوتونات المستطارة، سواء استطارة منفردة او متعددة، تعتمد على الترتيب الهندسي للمنظومة وعلى خصائص مادة الهدف. ان المعلومات التي تم الحصول عليها من هذه التقنية تعتمد بشكل وثيق على كثافة مادة الهدف، مما يسمح برصد اي تغيير في انتظام تركيب تلك المادة. على هذه الاسس، يصف برنامج المحاكاة الحاسوبي الحالي سلوك حالة التاكل لنماذج من الحديد او الفولاذ وصفا كميا. وقد تم تنفيذ هذا البرنامج على مجموعة من مركبات الصدا الشائعة، هي FeO, Fe2O3, Fe3O4, Fe(OH)2, Fe(OH)3, FeCl2 قورنت النتائج المستحصلة من هذا العمل مع بعض النتائج النظرية والعملية المنشورة، حيث اظهرت توافقا جيدا ضمن المعطيات التي تم تحديدها مسبقا. فكانت نسبة الخطا الخاصة بحسابات سمك التشبع بحدود (0.02 - 0.08)، بينما مقدار الخطا الخاص بحسابات الكثافة حوالي (0.003 - 0.04). ان نتائج المحاكاة الحالية مفيدة، ليس فقط، في تخمين الترتيب الافضل لمنظومة الفحص المعتمدة في عملها على مبدا استطارة كومبتن المرتدة للاشعاع وانما في تخمين امكانية التطبيق العملي لهذه المنظومة. زيادة على ذلك، انها وسيلة ناجعة في الفعاليات التدريبية للتنمية البشرية، للموظفين والطلبة، في مجال تطبيقات التقنيات النووية خصوصا في مجالي الصناعات الانشائية وصناعة النفط والغاز. من جانب اخر، باجراء بعض التحويرات الطفيفة على المحاكاة الحالية يمكن توظيفها في مجالات الفيزياء الاحيائية والطبية | A computer simulation program based on Monte Carlo method and photon backscattering technique was designed and written to be as virtual experimental system, instead of the real experimental system, concerning nondestructive testing (NDT) of corroded materials. The simulation based on this program was able to analyze the energy distribution of photons that reach a detector system after suffering several successive Compton scattering events in a target. It has found that the number of single and multiple backscattered photons depend on the geometry of the system and the characteristics of the target. Also the information has been obtained by this technique is strongly related to the material density, this allows changes in the material uniformity to be monitored. On these bases, the present computer simulation program is described to quantitatively characterize the corrosion status of steel samples under insulation. The program is carried out on FeO, Fe2O3, Fe3O4, Fe(OH)2, Fe(OH)3 and FeCl2. The results of this work were compared with the theoretical and experimental data. The comparison showed that are in good agreement with the published data. The deviation of the simulated results of this work from the experimental values about for the saturation thickness (0.02 - 0.08) and the errors of the density results from experimental data (0.003 - 0.04). Our simulation results are useful not only to evaluate the optimal configuration of an inspection system that has used Compton backscattered radiation, but also to assess the feasibility for setting up experimentally this system. In addition, it has been very useful for training activities with a view of human resources development, staff and students, in the field of application of nuclear techniques, particularly, in structural industries and industry of petroleum and gas. In addition, with slight modification, the present simulation technique can be employed in the fields of bio and medical physics

دراسة تاثير المضاف 2 - ميثيل نفثالين على نظام اروماتي (انثراسين / 2 - ميثيل نفثالين) == Study of doping effect of 2 - Methylnaphthallen in aromatic system (2 - Methylnaphthallen/Anthracene )

Author name: علي كاظم وداي
Supervisor name: زياد عدنان صالح
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: تم في هذا البحث, اخذ اطياف الفلورة للانثراسين المذاب في دايا ميثيل سلفوكسايد بالتركيزين M] [10 - 3,[10 - 4 M] حيث اظهر اربع حزم اهتزازية واضحة وقد تم تهييجه بطول موجي هو 365nm)) وكذلك تم اخذ طيف ثنائي ميثيل نفثالين النقي المذاب في دايا ميثيل سلفوكسايد وقد اظهر ثلاث حزم اهتزازية وقد تم تهييجه بطول موجي هو (270nm). وقد تمت هذه القياسات بدرجة حرارة الغرفة.اظهرت قياس اطياف الامتصاص والفلورة لمحلول الانثراسين المشوب بثنائي ميثيل نفثالين بنسب مختلفة, بتراكيز مولارية مختلفة تبدء من [10 - 3M] الى [10 - 4M] وبطول مهيج (270nm). واظهرت قياسات اطياف هذه المحاليل تبادلا للشحنة الذي يقود الى انتقال للطاقة من جزيئة المضاف ثنائي ميثيل نفثالين الى جزيئة المضيف الانثراسين باطياف الفلورة عند التراكيز اعلاه. تقود هذه النتائج الى تناقص نسبة انتقال الطاقة المحددة من خلال طريقة ميكانيكية تبادل الالكترون. هذا الانخفاض له عدة اسباب منها وجود الفخاخ (traps) والى الامتصاص الذاتي القوي لبلورة الانثراسين .ان ظهور حافة حادة في طيف الفلورة لجزيئة المضاف (2mn) يشير الى وجود امتصاص ذاتي قوي لطيف هذه الجزيئة مما يؤثر على معدل انتقال الطاقة كما اظهرت النتائج تزايد عامل الكبت مع تزايد التركيز .و يتبين من دراستنا للخصائص الكهربائية والتوصيلة الكهربائية هذه لوجود طاقاتي تنشيط لجزيئة الانثراسين المشوبة بنسب مختلفة من جزيئة ثنائي ميثيل نفثالين ولكل طاقة تنشيط ميكانيكية توصيل مختلفة والمحضرة على الواح كوارتز والزجاج على حد سواء وبتركيز مولاري [5*10 - 2 M], التي يمكن تفسيرها بالاعتماد على نظرية الحزم لشبه الموصل والتي تقترح انتقال حاملات الشحنة من مستوى فيرمي المانح الى حزمة التوصيل في شبه الموصل السالب (n - type) عند درجات الحرارة العالية بواسطة التهيج الحراري . معلمات تركيب الشبيكة للاغشية الرقيقة للانثراسين المشوب بثنائي ميثيل نفثالين التي حللت بواسطة (a LabX XRD 6000 SHIMADZU XR - Diffractometer with Cu Kα radiation) , يظهر تاثير التشويب على الافلام الرقيقة للانثراسين بشكل واضحا. وتم الحصول على نمط الحيود بزاوية (2θ) وتبدء من (20°) الى (60°) وبزاوية مجسمة مقدارها (5°) . وكلاهما ثنائي ميثيل نفثالين المضاف الى الانثراسين كشائبة يظهر طيف حيود الاشعة السينية عمليا قمة حاده وقمتان صغيرتان, وهذا يعني لنا ان الاغشية الرقيقة ذات طبيعة تركيبية متعددة التبلور. | In this research, The fluorescence spectrum of Anthracene dissolved in dimethylslfoxayd was studied then showed four obvious vibrated bands ) λex=365nm). Moreover, the spectrum of pure (2 - Methylnaphthalene) dissolved in dimethylslfoxayd was dealt with and it showed three vibrated bands and it has taken at a wavelength (λex=270nm). The measurements was at the room temperature. The absorption and fluorescence spectra of solutions for anthracene doped with 2 - Methylnaphthalene with different ratios, had been measured with different molarity concentrations starting from the [10 - 3M] to [10 - 4M] and at excited wavelength) λex= 270 nm). The measurements of these solutions spectra showed the electron exchange, which led to the energy transfer from the guest (2 - Methylnaphthalene) to the host (Anthracene) with getting fluorescence at the above concentrations. The results led to a decrease in the rate of the energy transfer calculated in the way of energy transfer through mechanical electron exchange. This decline has several causes including the existence of (traps) and to the strong self - absorption of the anthracene crystal.The appearance of a sharp edge in the fluorescence spectrum of the guest (2 - methyl naphthalene) molecule indicates a strong self - absorption spectrum of this molecule which affects on the rate of energy transfer. Also, the results showed the increasing of the quenching factor with the increasing of the concentration.This study shows the presence of energies activation Anthracene doping different proportions of 2 - Methylnaphthalene which were prepared on a substrate of glass and quartz are both which have been used at molarity concentration [5*10 - 2M]. Each activation energy has different mechanical connecting which could be interpreted by relying on the bands theory of semiconductor which proposes a transition charge which carriers from the fermi donor to the conduction band in the semiconductor negative (n - type) at high temperatures by thermal excitation.The structure and lattice parameters of anthracene dopant 2 - Methylnaphthalene thin films were analyzed by a LabX XRD 6000 SHIMADZU XR - Diffractometer with Cu Kα radiation. The effect of the Anthracene dopant on the structure of the film is clear. Diffraction pattern was obtained with 2θ starting from 20° to 60° at 5° solid angle. In both the as - deposited and Anthracene - doped 2 - Methylnaphthalene thin films, the X - ray diffraction spectra possess one sharp and two small peaks. It means that the film is polycrystalline in nature structure

دراسة التركيب النووي للنوى الزوجية - زوجية ذات الاعداد الكتلية A=82 - 144 باستخدام نموذج IBM - 1 == Studying the nuclear structure of even - even (a=82 - 144) isotopes using IBM - 1

Author name: علي عبد الاله عبد الجبار العبادي
Supervisor name: خالد سلمان ابراهيم | ايمان طارق العلوي
General topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: في البحث الحالي استخدم نموذج البوزونات المتفاعلة الاول(IBM - 1) لدراسة التركيب النووي للنظائر الزوجية - زوجية ذات الاعداد الكتلية (A=82 - 144) . تم استخدام البرنامج (IBSS1.For ) لايجاد مستويات الطاقة وحساب نسبها وانتقالاتها الكامية بالاعتماد على العدد الكلي للبوزونات (N ) . وقد تم تصنيف هذه المستويات حسب مستويات الطاقة (band - g ,β, γ).وكذلك تم تحديد سلوك النظائر بالاعتماد على قيم مستويات الطاقة العملية ونسبها وترتيب الحزم فيها, واظهرت النتائج ان النظائر تنتمي الى التناظرات الديناميكية U(5),SU(3),O(6),U(5) - O(6). كما تستخدم برنامج (IBMTT.For) لحساب احتمالية حدوث الانتقالات الكهربائية رباعية القطب B(E2) وعناصر المصفوفة المختزلة لمؤثر الانتقال الكهربائي رباعي القطب ان المستوي يمتلك شكل متطاول ( prolate) ,بينما ياخذ المستوي الشكل المفلطح ( oblate). كذلك تم حساب احتمالية الانتقالات المغناطيسية ثنائية القطب B(M1),و عناصر المصفوفة المختزلة لمؤثر الانتقال المغناطيسي ثنائي القطب ,باستخدام برنامج M5.For)). استخدمت نتائج حسابات عناصر المصفوفة المختزلة لمؤثر الانتقال الكهربائي رباعي القطب وعناصر المصفوفة المختزلة لمؤثر الانتقال المغناطيسي ثنائي القطب لحساب نسب الخلط δ (E2/M1),و نسب الخلط المختزلة (E2/M1) ,وتعدد القطبية multipolarity)) الخاصة بكل نظير . لقد اظهرت النتائج توافقا جيدا مع القيم العملية المتوفرة واختلافا مع بعض القيم ,حيث ان قيم نسب الخلط في النظائر , , , للانتقالات ( - ),) - ),( - ),( - ),كانت (0.18) - 8.2 - 3),)6.3),)6.6),)على التوالي .بينما اظهرت نتائج النسب في نفس النظائر وللانتقالات نفسها القيم (0.6790) - 12.3470) , ) ,(10.8692) ,(8.8238) على التوالي . كما تم استخدام التركيب الهندسي لنموذج البوزونات المتفاعلة الاول وذلك لحساب طاقات السطوح لبعض النظائر وكانت النتائج متوافقة بشكل جيد مع المخطط المثالي للخطوط الكنتورية | In the present work , the interaction boson model (IBM - 1) was used to study the nuclear structure of even - even (A=82 - 144)isotopes. The (IBSS1.For)program was used to find the energy levels and calculate the energy ratios. The researcher has classified the energy levels according to the (g, β, γ - band), and determined the behavior of these isotopes according to the experimental values of energy levels ,their ratios and bands arrangement . the isotopes are belong to the dynamical symmetries U(5),SU(3),O(6),U(5) - O(6). The (IBMTT.For) program was used to calculate the electric quadrupole probability B(E2) , reduced matrix elements of electric quadrupole operator , and electric quadrupole moments , . Throughout the results of electric quadrupole moments ,the state have a ( prolate) shape while the state have an (oblate ) shape . The values of magnetic dipole transition probability B(M1) and reduced matrix elements of magnetic dipole operator have been predicted by (M5.For) program . The results of reduced matrix element of electric quadrupole and magnetic dipole transition operators were used to calculate delta mixing ratios δ(E2/M1), reduced mixing ratios (E2/M1), and multipolarity for each isotopes. The values of delta mixing ratios in , , , and , for the transitions ( - ), ( - ),( - ) , and ) - ) were (0.18) ,( - 8.3),(6.3),and(6.6) respectively,the present calculations confirmed that ,the values of delta mixing ratios in the same isotopes and for the same transitions are (0.6790), ( - 12.3476) ,(8.8238), and (10.8692) respectively . The geometrical structure of the interaction boson model (IBM - 1) was applied for a chosen isotope to calculate the potential energy surfaces, the results were in good agreement with the typical plots of countor lines and trixial symmetries

دراسة تاثير التشعيع ل PMMA المشععة الكترونيا بواسطة SEM == Investigation of Charging Effect in Electron Irradiated PMMA by SEM

Author name: علي سعد مهدي
Supervisor name: حسن نوري عبد الوهاب العبيدي
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: تم انجاز اجراء تحليلي لقياس الشحنة التي يمكن ان تحقن في نموذج لمادة عازلة في المجهر الالكتروني الماسح. يعتمد هذا الاجراء بالاساس على تحديد شحنة الاستقطاب بواسطة ظاهرة المراة الالكترونية. من خلال ذلك تم تطوير عدة علاقات مرتبطة بهذا الموضوع لتكون قابلة للتطبيق فيما يخص بالطبع شحنات الاستقطاب للمواد الخطية والموحدة الخواص . استنادا الى ذلك تم تحديد الجهد الذي ينشا كنتيجة لتاثير كلا من الشحنات المحقونة الحرة والشحنات المستقطبة. ومع ذلك فهذا العمل تم انجازه وفقا لمنطلق من الناحية النظرية وقد تم اعتماد منحنى التاثير المراتي بمثابة مقياس تقييم لجودة الصورة المراتية. لذلك فان هذا الاجراء قد تم استخدامه لدراسة منحنيات التاثير المراتي التجريبية لمادة PMMA ولجهود تشعيع مختلفة ومن ثم معرفة اهم المعلمات التي تؤثر على هذه المنحنيات. من ناحية اخرى تم دراسة محاكاة مسار الحزمة الالكترونية في داخل غرفة المجهر الالكتروني الماسح فيما يتعلق بتفاعل هذه الحزمة مع المادة ضمن الغرفة. في الواقع وقد استند التعامل الرياضي على الميكانيك الكلاسيكي باستخدام مفاهيم استطارة روذرفورد. في الواقع فان هذه الدراسة قد تم انجازها اولا باستخدام مجال التربيع العكسي اما المرحلة الثانية فهي تتعلق بمجال التربيع والتكعيب العكسي. اهمية الصيغ التي تم الحصول عليها لهذه المسارات تاتي من ارتباطها بين بعض من اهم المعلمات التي تتحكم في ظاهرة التاثير المراتي. هذه المعلمات في الواقع هي الشحنات المحقونة، زاوية السقوط، جهد المسح، ومسافة التشغيل، وثابت العزل الكهربائي لمادة العينة. اوضحت النتائج بشكل جلي ان شحنة الاستقطاب تؤثر على قوة كولوم التي تعاني منها الكترونات المسح. علاوة على ذلك فان التغير في جهد العينة يعتمد بصورة رئيسية على ثابت العزل لمادة العينة. | An analytical procedure has been carried out to measure the charge that may trapped in an insulator sample of scanning electron microscope. It is mainly concerning with the determination of the deduced polarization charges by means of mirror effect phenomenon. Several relations related to such issue have been modified so as to be applicable for regarding charges due to polarization in linear and isotropic material. Consequently, the potential arises as a result for both trapped free and polarization charges is set up. However, this work has been carried out concerning the theoretical point of view, the mirror plot curve has been adopted as an evaluation scale for the quality of the mirror image. Therefore, this procedure had been used to investigate the experimental mirror plot curves for PMMA material with different accelerating potential and then study the most important parameters that affects in these curves. From other hand, a simulation for the electron beam trajectory inside SEM chamber have been investigated regarding the interaction of this beam with material that chamber involves. Actually, the mathematical manipulation has been based on classical mechanics using Rutherford’ scattering aspects. This investigation, in fact, have been accomplished by using an inverse - square field in the first step while the second step has been concerned with an inverse - square and cubic field. The importance of the obtained formulas for these paths comes from its correlation among some of the most important parameters that control the mirror effect phenomenon. These parameters, in fact, are the trapped charges, incident angle, scanning potential, working distance, and dielectric constant of sample material. Results have clearly shows that the polarization charge significantly influences the Coulomb’s force that incoming electrons suffer from. Furthermore, the variation in the sample potential is mainly depend on the dielectric constant of the specimen material.

معدل التقشر ومتانة الانحناء لمتراكبات ثنائي هيدروكسي بنزين (هيدروكوينون) المدعمة بالالياف == Ablative Rate and Bending Strength of Fibers Reinforced Dihydroxy - Benzene(Hydroquinone) Composites

Author name: علي زامل منشد
Supervisor name: بهجت بهلول كاظم
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: تم دراسة معدل التقشر ، التوصيلية الحرارية، متانة الانحناء،و صلادة فيكرز لمتراكبات الفينول نوع ثنائي هيدروكسي بنزين مدعمة بالياف مختلفة (الياف زجاجية نوع E على شكل حصيرة والياف كاربونية مستمرة)،وبنسب حجمية(0%،20%،40%،60%،70%) بدلالة الخواص الحرارية والميكانيكية لتغيرات الكسر الحجمي للالياف.المتراكبات التي خضعت للاختبار كانت مجموعتين هي EGFC، CFC، بالاضافة لمادة الفينول نوع هيدروكوينون(ثنائي هيدروكسي بنزين)HQR. تم استخدام تقنية الكبس الحار لتحضير المتراكبات باستخدام القوالب المارقة تحت الظروف القياسية.استعملت تقنية قرص لي لقياس التوصيلية الحرارية حسب المواصفة البريطانية القياسية لشركة جورج وكرفيه المحدودة. استخدمت تقنية الشعلة الا وكسي - استيلينية لتحديد معدل التقشر وكذلك معامل العزل الحراري حسب المواصفة القياسية ASTM - E285 - 80. وتم استخدام ماكنة Instron لحساب متانة الانحناء حسب المواصفة القياسية ASTM D - 790.واستعمل جهاز الصلادة المجهرية لفيكرز لحساب الصلادة وحسب المواصف القياسية ASTM E92 - 82 . نفذت المحاكاة لحساب معدل التقشر بثلاث ابعاد باستخدام طريقة الفروقات المحددة. اظهرت النتائج بان التوصيلية الحرارية تزداد تصاعديا بتعاقب النسبة المئوية الحجمية للالياف. من خلال النتائج النظرية لاختبار التوصيلية الحرارية التي حسبت من خلال مود يل micro structures وعند مقارنتها مع النتائج العملية تبين القيم النظرية ان هناك تقارب مع النتائج العملية. يسلك معدل التقشر سلوك معاكس حيث يكون اوطا قيمة عند اعلى نسبة مئوية حجمية للالياف ، وتبين العلاقة بين التوصيلية الحرارية ومعدل التقشر اليتين متزاملتين، الاولى مع بداية الاختبار والمميزة بتوزيع مثالي للالياف الذي يدل على الية التشتيت الحراري بالالياف بسبب تكون شبكة من مسارات التوصيلية الحرارية، والثانية التي ترافق اختبار التقشر والمميزة بمظهر تكون الشروخ القصية التي تدل على الية تكون الفحم المبكرة.كما تبين بان متانةالانحناء تزداد تزايديا خطيا بتعاقب النسبة المئوية الحجمية للالياف ، وتعرض العلاقة بين الكسر الحجمي ومتانة الانحناء بروز الية pull - out ، وقد تبين وجود نوعين من الربط بين المادة الاساس والمضافات هما : الربط الضعيف والربط القوي، كما تبين بان الصلادة تزداد تزايديا خطيا بتعاقب النسبة المئوية الحجمية للالياف.جاءت قيم النتائج للمحاكاة لمعدل التقشر اعلى من قيم النتائج العملية، وقد فسر ذلك على ان درجة حرارة لهب شعلة الاختبار (الاوكسي _ استيلينية) العملية لم تصل الى درجة الحرارة الشعلة المستخدمة نظريا، بالاضافة الى تاثير السطح البيني للمتراكبات الذي كان ذو متانة وقوة ارتباط عالية، وقيم الكثافة للمتراكبات تدل على ذلك. وظفت الصور الفوتوغرافية بالاقتران مع الصور المجهرية والكثافة للمساعدة في تفسير النتائج.يتضح من النتائج العملية بان المتراكبات المستخدمة في هذا البحث ذات الكسور الحجمية العالية يمكن استخدامها في التطبيقات التي تحتاج الى تشتت حراري كبير، مقاومة عالية للتهرئة، متانةانحناء وصلادة عالية. | In this work, thermal conductivity, K, ablation rate, Ar, bending strength, σf, and Vickers hardness VHs for phenolic (phenol - formaldehyde) resin, PFR type hydroquinone HQR reinforced with different fibers (,E - glass, as mat , and carbon fibers, as continuous) have been studied, in terms of thermal and mechanical properties, which are subject to change in different fibers volume fraction.The composites candidates for this work were two groups; E - glass fibers composites (EGFC), carbon fibers composites (CFC), besides, pure matrix phenolic resin PFR type HQR. Hot - press technique was used to prepare the composites as well as hydroquinone specimens using flash molds at standard conditions.Lee’s disk technique was used to measure thermal conductivity. Oxy - acetylene flame technique was used to determine ablation rate as well as thermal insulator index according to ASTM - E285 - 80. Instron machine was used to measure bending strength according to ASTM - D790.Microhardness Vickers machine was used to determine the hardness according to ASTM - E92 - 82. Simulation programs of heat transfer in three dimensions of ablative test for hydroquinone and hydroquinone composites specimens were carried out using finite difference method.Thermal conductivity results show that K values increase progressively by succession of volume fraction of fibers. Ablation rate behaves inversely, where it drops at high volume fraction of fibers. The thermal conductivity - ablation rate relationship displays two mechanisms. First, associated with the starting of test is recognized by ideal distribution of additives, which leads to thermal dispersion due to the formation of segregated network of thermal conducting paths. Second mechanism is associated with ablation test recognized by shearing cracks appearance, which leads to earlier char production mechanism.Bending strength results show, that σf increases progressively by succession of volume fraction of fibers. The bending strength - volume fraction relationship displays two mechanisms according to the kind of fibers. Where, it can be observed, pullout mechanism with respect to fibers composites. It is shown that there are two kinds of bonding between the matrix and the fibers; weak - bond and strong - bond. The composites were broken through tension down the specimen and compression upper the specimen and shearing fracture mechanism. Hardness Vickers results show that HVs increases progressively by succession of volume fraction of fibers.Ablation simulation results values coming higher than experimental results value. This could be explained as the interface affect of composites, which had high strength and strong bond force, and density values evidence to that.Optical micrographs, coupled with auxiliary microscopy, and densities were employed to aid interpretation of results. The composites under the study can be used in applications, which need high thermal dispersion, high ablation resistance, and high bending strength

حسابات كثافات الحالة لما قبل توازن التفاعل النووي باستخدام نموذج الجسيمة المثارة == The Level Density Calculations of Pre - Equilibrium Nuclear Reaction Using the Exciton Model

Author name: علي داود سلوم العجيلي
Supervisor name: شفيق شاكر المولى
General topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: تم عرض كثافة الحالات الجزئية للجسيمات والفجوات المطلوبة لحساب المقاطع العرضية لما قبل توازن التفاعل النووي. حيث حسبت كثافة الحالات الجزئية باستخدام نموذج الاكسايتون ذا التباعد المتساوي الفسح الذي يعتبر الفسح بين المستويات متساوية وكثافة الحالة لجسيم مفرد ثابتة. صيغة اركسون التي تمثل الصيغة الخام وجميع الصيغ المصححة لكثافة الحالات الجزئية الناتجة من اضافة تصحيحات حقيقية لصيغة اركسون قد درست. وهؤلاء التصحيحات هم : التصحيح الناتج من مبدا باولي ، تصحيح الازدواج ، تصحيح الفجوات الفعالة والخاملة ، تصحيح عامل الشحنة ، تصحيح البرم ، تصحيح الزخم الخطي ، تصحيح الايزوسبن. في هذا العمل تم اقتراح الصيغة الشاملة التي تتضمن التصحيحات اعلاه حيث قورنت مع الصيغ الاخرى لكثافة الحالات الجزئية وقد بينت المقارنة ان صيغة تصحيح البرم هي الاقرب للصيغة الشاملة. كذلك قورنت نتائج الصيغ المصححة مع صيغة اركسون باعتبارها الصيغة الخام ونوقشت الفروقات بين هذه الصيغ وبين اركسون.كما درست كثافة الحالات الجزئية لمركبتين لصيغة اركسون وصيغة التصحيح الناتج من مبدا باولي وتصحيح الازدواج حيث شوهدت فروقات واضحة عن حالة المركبة الواحدة. كذلك تم حساب كثافة الحالات الجزئية باتخاذ كثافة الحالة للجسيم المفرد غير ثابتة (تقريب نموذج التباعد غير المتساوي) حيث تم اشتقاقها باستخدام متغير كثافة الحالات من صيغة القريشي الاولى وصيغة القريشي الثانية وصيغة روهر وقد لوحظ ان النتائج تختلف كما لو كانت كثافة الحالة لجسيم مفرد ماخوذة من نموذج الفسح المتساوية. واخيرا قورنت نتائج كثافة الحالات الجزئية مع النتائج المكتوبة بالفورتران 77 الموصوفة بواسطة الباحث افرجينو. بينت المقارنة ان نتائجنا يمكن اعتمادها في حسابات كثافات الحالات النووية لما قبل توازن التفاعل النووي. | The partial level density (PLD) of the particles and holes,which are required to calculate the cross sections of pre - equilibrium nuclear reactions, are reviewed. PLD were calculated using the equi - distant spacing model (ESM) that considers the spacing between the levels is equal and the single particle level density is constant.Ericson's formula which represents the crude formula and all other corrected formulae of PLD resulted from adding somereal corrections to Ericson's formula are studied. These corrections are; the correction due to Pauli's principle, pairing effect, active and passive holes effect, charge factor effect, surface effect, spin effect, linear momentum, and isospin effect.In this work, the comprehensive formula, which includes the above corrections, is suggested and compared with other PLD formulae. The comparison shows that the Ericson's formula with spin correction is closed to the comprehensive formula. The results of each PLD corrected formula are compared with the results of Ericson's formula and the effects of any correction toEricson's formula are discussed. Also, Two - component formula has been studied for Ericson, Williams and pairing, the results show that there is a remarkable difference between them. In addition, the PLD has been studied with various nuclei having different mass number (56Fe, 96Mo, 148Sm and 162Dy) and the results illustrate that the PLD increase with increasing the mass number. PLD is calculated by taking the single particle density as not constant (i.e. non - ESM approach) and by taking other expression to single particle level density where derived using the level density parameter from Al - Quraishi first formula, Al - Quraishi second formula and Roher formula. It is noted that the results differ from the results if the single particle level density which are taken from ESM.Finally, the results of PLD are also compared with the results of PLD code that are written in Fortran77 and distributed by Avirgeanu. The results show that our code can be dependentand can be used in nuclear level density calculations for preequilibrium reactions

تحضير ودراسة الخصائص الفيزيائية والمكانيكية للمادة المرتكبة المحضرة من سيراميك الكودراتيت المدعمة بالنحاس == Preparation and study the physical and mechanical properties of Cu reinforced cordierite ceramic composites

Author name: علاء رافد علي
Supervisor name: انوار حسين علي الفؤادي
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: A raw material mixture was used for forming the ceramic matrix cordierite(Cor), was included Iraqi clay (Kaolin Duekhla), Alumina and Talc. Prepare (Cu/Cor) composite, were obtained by addition a fine powder (99.99%) of copper as a reinforcement material, to cordierite ceramic with different percentage ratios (10, 20, 30 and 40) wt%. The temperatures for preparing the composite are (700,800) °C ,and the time of treatment is (1,2) hours respectively. The result of X - ray revealed that the peaks of cordierite phase decreased with increasing the additive amount of copper and slightly increased as temperature elevated from 700 oC to 800oC. Scanning electron microscope (SEM) test was used to observe morphology of blend materials . The comparison results of microphotograph images of cordierite ceramic and (Cu/Cor) composite with 40 wt % Cu , shows that the surface of cordierite sample is uniformly and compactly interference by copper distribution particles led to decreasing the porosity with increasing temperature to 800°C for two hours. The measurement of bulk density and apparent porosity was carried out according to Archimedes method and according to (ASTM) procedure, the results show that the density and thermal conductivity of (Cu /Cor) composite samples increased with increasing copper content ratios up to 40 wt% at the heat treatment (700,800) °C for (1,2) hours respectively. The results of calculation of apparent porosity (Por) and water absorption (%) was shows that, the values were decreased at 800°C more than 700°C ,for two hours more than one hours and at copper content ratio 40% more than (30, 20 and 10) respectively. Vickers micro hardness test is carried out by using "Digital Micro hardness tester VHS 1000. The presence of copper decreases the hardness, in comparison with the untreated ceramic sample(without copper) while the compressive strength increased with the increasing the temperature and copper content ratio from (38) to( 167.8 ) MPa at 800˚C . The addition of copper up to 40% in cordierite matrix lead to decrease of pores and then enhance the densification of (Cu/Cor) composite

تمييز الاهداف عن الخلفية الارضية ذات التماثل الحراري في الحزمتين من الاطوال الموجية [3.5 - 4.1 - µm and 11 - 12 - µm ] == Discrimination of targets from background of similar temperature, using two - channel data in the 3.5 - 4.1 - µm and 11 - 12 - µm regions

Author name: عدي جواد كاظم
Supervisor name: بسعاد هادي حمزة
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: للتمييز بين هدفين او هدف عن الخلفية الارضية استخدمت طريقتان,طريقة حد العتبة وطريقة التصنيف طريقة الحد الاقصى (MLH). تم حساب ( Wλ ) الانبعاثية الطيفية للهدف والخلفية في درجات حرارة مختلفة(T) في اثنين من الحزم الطيفية وبطول موجي μm (3.5 - 4.1) μm(11.0 - 12.0) . وبرسم العلاقة بين دالة التمييز (DF)كدالة لانبعاثية الهدف (target emissivity (εA)) للحزمة وكدالة لدرجات حرارة الهدف. من هذا العمل, التمييز بين الهدف والخلفية الارضية تحت الظروف الجوية المحددة المستخدمة في الموديل الرياضي للحسابات يبين جدوى امكانية كشف الاهداف المختلفة عن الخلفية الارضية بفارق حراري صغير نسبيا.ان تمييز الاهداف بطريقة الكشف الحراري باللاشعة تحت الحمراء يتم من خلال استخدام طريقة حد العتبة والتي تعالج مشكلة الكشف عن الاهداف التي تكون قريبة لدرجة حرارة المحيط ,وذلك بنمذجة الخلفية وباستخدام الموديل الرياضي كقاعدة لتطوير وفهم العمليات الفيزيائية واختلافاتها الامر الذي سيؤدي الى بناء خوارزمية لتعزيز الفرق بين الهدف والخلفية.وبحساب النسبة بين الاشعاع المستلم من الهدف ومن الخلفية، فان افضل تمييز للهدف يكون في حزمتين من الطول الموجي مما هو عليه الحال في حالة استخدام الحزمة الواحدة وخاصة عندما تكون درجة الحرارة للخلفية الارضية والهدف متماثلة..باستخدام احدى طرق التصنيف وهي طريقة الحد الاقصى لتميــــيز الهدف عن الخلفية الارضية في درجات حرارة مختلفة وحزم اطوال موجية مختلفة ومن خلال ملاحظة اقصى كثافة احتمالية . نستنتج ان طريقة الحد الاقصى هي افضل طريقة لتحسين التمييز في نطاق واسع من حزم الطول الموجي في درجات حرارة مختلفة بينما تكون طريقة حد العتبة اسلوب افضل في تحسين التمييز في درجات حرارة مختلفة ولكن في نطاق ضيق من حزم الطول الموجي | To discriminate between two IR targets or target from background two methods are used, the threshold method and the classification method Maximum likelihood Method. we calculate the spectral radiant emittance Wλ for target and background at different temperature (T) in two bands (3.5 - 4.1) μm (11.0 - 12.0) μm. The discrimination function (DF) is plotted as a function of the target emissivity (εA) for bandpass and as a function to target temperature TA in two bandpasses. From this work the discrimination of target from background under selected atmospheric conditions used in the modeling calculation demonstrates the feasibility of detection for target to background in minor temperature differences. Targets discrimination for thermal IR detection is accomplished by using threshold method, which has addressed the problem of detecting targets which are close to ambient temperature. This was done by modeling the background and by using the model as a base for developing an understanding of physical processes and their variations which will lead to the construction of an algorithm to enhance target to background contrast. The present study showed that by ratioing radiance received from target and background better target discrimination is possible using two bands than case from using one bandpass especially when target and background are of similar temperature. Using the Maximum Likelihood Method (MLH) to discriminate target from background in different temperature and different bands will demonstrate the maximum probability density function. Concluding that the Maximum Likelihood Method is to be the best method for discrimination in wide range of wavelength at different temperatures while the threshold method is to be the best method for discrimination at different temperatures but in range of narrow wavelength of bandpasses.

دراسة نظرية لتاثير الانكسار المزدوج في المضخم شبه الموصل البصري == Theoretical Study of the Birefringence Effect in Semiconductor Optical Amplifier

Author name: عدنان هاشم محمـد
Supervisor name: حسن عبد ياسر | علي هادي حسن
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: ان هدف كثير من البحوث في مجال الاتصالات الحديثة هو زيادة سعة النقل في الانظمة التي تسخدم مزج - تقسيم الطول الموجي ( WDM) الشائعة الاستخدام في الشبكات البصرية الحالية. تستخدم المضخمات البصرية التي تتنوع حسب اسباب الاستخدام لضمان الحفاظ على قدرة النبضة ضمن مستوى مسموح لذا يستخدم في الكثير من الحالات كمضخم ضمن الخط الناقل اضاقة الى اسخدامه في تطبيقات مختلفة. يظهر مضخم اشباه الموصلات البصري ظاهرة ثنائي الانكسار التي تجعله يتاثر بحالة الاستقطاب للنبضة الداخلة. ان من المتوقع ان يكون لحالة التزامن بين ظاهرة ثنائي الانكسار والتاثر بحالة الاستقطاب الداخلة دور كبير في سلوك المعاملات المختلفة للمضخم. من جهة اخرى فان ظاهرة اقتران النمط والتي تتمثل بتبادل القدرة بين الانماط المتعامدة لايمكن اهمالها لدورها الكبير في تشكيل خواص المضخم. تم اقتراح طريقة رياضية جديدة لحل معادلة الانتشار في مضخم اشباه الموصلات البصري والتي تاخذ بنظر الاعتبار التاثيرات الحركية البطيئة وظاهرة اقتران النمط. ان هذه الطريقة مبنية على اساس تقسيم المضخم الى مقاطع صغيرة بالاتجاه الطولي لضمان اعتبار كسب المادة ذات تغيير صغير ضمن كل مقطع ويمكن اعتبارها ثابتة وهذا بالنتيجة يؤدي الى اعتبارقدرة النبضة ثابتة ايضا ضمن كل مقطع. تم اشتقاق صيغة تكرارية لحساب التاثيرات على طول المضخم وحلت هذه الصيغ التكرارية بالاعتماد على معادلات الربح. بينت النتائج ان الاعتماد على معادلات اقتران النمط تكون اداة مناسبة لدراسة انتشار الانماط داخل المضخم. عند غياب حالة اقتران النمط فان الحافة المتقدمة تختزل الكسب المنجزعلى الحافة المتاخرة وان زمن استرداد الطوريكون طويلا. عند الاخذ بنظر الاعتبار حالة اقتران النمط فقد حدث انحراف في قمة النبضةsuper Gaussian امزامن استرداد الطور فقد قل بوجود حالة اقتران النمط. يعرض الطيف للنمط المستعرض الكهربائي (TE) والمغناطيسي (TM) انخفاضات وارتفاعات بسبب تضمين الطور الذاتي(SPM) غير ان الطيف الكلي يعرض انخفاضات وارتفاعات اقل ويعتمد على معامل الشكل للنبضة. من اجل تحليل تدوير الاستقطاب خلال المضخم فقد تم دمج تاثير حالة الاستقطاب الداخل وخواص مصفوفة الانتقال لكل مقطع من مقاطع المضخم وبوجود اقتران النمط ايضا حيث تم الحصول على معادلات جديدة تصف تطور حالة الاستقطاب داخل المضخم. تم حل هذه المعادلات تحليليا ليتم الحصول على صيغ جديدة لتحديد خواص استقطاب الضوء بدون حالة ترابط الانماط وبوجودها. بينت النتائج ان درجة الاستقطاب عند اهمال اقتران النمط تظهر عند السطح الذي يعني ان الضوء مستقطب كليا. تقل درجة الناقصية كدالة لطول المضخم وتتناسب عكسيا مع القدرات الداخلة امزااوية الاستقطاب كدالة لطول المضخم فتقل عند مواقع مختلفة من المضخم ولاتعتمد على القدرة الداخلة. تقل درجة الناقصية كدالة للقدرة الداخلة ولاتعتمد على التيارعند جميع الزوايا. ان تغيير التيار يعرض نتائج مهمة فيما يخص زاوية الاستقطاب عند القيمة . ان دوران مستوى الاستقطاب عند هذه الزوايا يكون حساسا جدا لمدى صغير جدا من التيار. بينت النتائج عند الاخذ بنظرالاعتبارظاهرة اقتران النمط ان حالة الاستقطاب تظهر اسفل سطح كرة Poincare الذي يعني ان حالة الاستقطاب تغيرت وكان الضوء اصبح مستقطبا جزئيا. ان وجود ظاهرة اقتران النمط جعل تغيير زوايا الناقصية وزوايا الاستقطاب كدالة لطول المضخم تبدو اقل مقارنة بحالة اهمال تاثير اقتران النمط.

تحسين خصائص كاشف ضوئي باستخدام تقنية التنميش الثنائي للسليكون == Improve of photodetecter characteristic using both sides porous silicon technique

Author name: عباس كسوب جار الله الخزرجي
Supervisor name: وسام جعفر عزيز الدجيلي
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: الخلاصة تم في هذا البحث دراسة الخصائص الكهربائية والبصرية والتركيبية لاغشية اوكسيد الزنك (ZnO) النقية والمشوبة بالانديوم (In) بنسب مختلفة (1%, 3%) المحضرة بطريقة الرش الكيميائي الحراري, والتي رسبت على قواعد زجاجية وسليكون مسامي بدرجة حرارة (400±10 oC) وبسمك (120±10 nm). قواعد السيليكون المسامي (لجانب واحد وللجانبين) تم تحضيرها بواسطة طريقة التنميش الكهروكيميائيه على رقائق من السليكون (100) .P - Type الكاشف الضوئي (سليكون مسامي/سليكون بلوري/سيليكون مسامي) (PS/c - Si/PS) صنع وحسن بترسيب الاكاسيد الموصلة الشفافة (ZnO/PS/c - Si/PS) و(IZO/PS/c - Si/PS). السيليكون المثقب كان بمسامات دقيقة (pore size > 50 nm) وقطر المسام يتراوح (0.5 - 1 μ m) وزعت المسامات بشكل عشوائي على سطح السيليكون المثقب. الكثافة العالية للمسامات يمكن ان تلاحظ والمسامية تقريبا .(67%) معدل السمك للجانب الامامي (المصقول) (6 μm) وللجانب الخلفي (الغير المصقول) (3 μm) تقريبا. طبيعة السطح للاغشية المرسبة على السيليكون المسامي تكون ذات سطوح خشنة مقارنة مع الاغشية المرسبة على قواعد زجاجية. بينت تقنية حيود الاشعة السينية ان كل الاغشية المحضرة على القواعد المختلفة هي ذات تركيب سداسي متعدد التبلور hexagonal wurtzite)) مع اتجاه تفاضلي سائد(002) ويعرض قمم جديدة اعتمادا على نوع القاعدة كذلك من خلال حيود الاشعة السينية نرى ازاحة في زوايا الحيود وتناقص في الحجم البلوري بسبب التشويب للاغشية المحضرة على قواعد زجاجية من (31.18 nm) الى (12.19 nm). اظهرت صور (AFM) مجهر القوة الذرية طبيعة السطح للاغشية المرسبة على قواعد زجاجية بان الاغشية المشوبة بالانديوم ناعمة ومنتظمة. نعومة الاغشية تتناقص مع تركيز (1%) ثم تصبح اكثر نعومة عند تركيز .(3%) النفاذية كانت عالية جدا للاغشية غير المشوبة والمشوبة بالانديوم لمدى من الاطوال الموجية ( (350 - 850 nm. النفاذية تقريبا (79%) قبل تاثير التشويب ثم تصبح (81 %) مع نسبة تشويب (1%) وتتناقص مع تركيز (3%) الى ( (71% .فجوة الطاقة كانت (3.1 eV),(3.22 eV), (3.21eV) للاغشية (pure ZnO) (IZO 1%) و.(IZO 3%) تتناقص المقاومية (ρᴏ) للاغشية المشوبة في درجة حرارة الغرفة مع زيادة تركيز الانديوم من (1%) الى 3%) ) . نلاحظ من خصائص I - V زيادة التيار الضوئي تحت شرط الاضاءة ونتيجة لزيادة تركيز الانديوم يزداد التيار الضوئي لكل الاغشية. كذلك يزداد التيار تحت شرط الظلام مع زيادة تركيز الانديوم ولكن هذه الزيادة اقل من الزيادة تحت شرط الاضاءة. الاستجابة الطيفية تزداد مع زيادة الطول الموجي لكاشف ضوئي PS/c - Si/PS وتصبح تقريبا (0.69 A/W) عند طول موجي (490), كذلك حسنت الاستجابة الطيفية للكاشف الضوئي بترسيب الاكاسيد الموصلة الشفافة على السيليكون المسامي (ZnO and IZO) بتراكيز انديوم مختلفة. الاستجابة الطيفية لكاشف (ZnO/PS/c - Si/PS) تساوي (0.73 A/W) عند الطول الموجي (385 nm) بينما الاستجابه الطيفية لكاشف (IZO/PS/c - Si/PS) كانت (0.84 A/W) عند الطول الموجي (400 nm). كذلك زمن الاستجابة وزمن الرجوع حسن بترسيب (TCO) . يتناقص زمن الاستجابة من (8 second) لكاشف ضوئي PS/c - Si/PS)) الى (4 second) بترسيب اغشية (IZO) بنسبة تشويب (3%) كذلك يتناقص زمن الرجوع من (6 second) لكاشف PS/c - Si/PS)) الى (2 second) لكاشف (IZO/PS/c - Si/PS). | In this work, structural, optical and electrical properties of have been studied for un - doped and In doped zinc oxide (ZnO) thin films with different indium doping concentrations (1% and 3%) prepared by a chemical spray pyrolysis technique, deposited on glass and porous silicon (PS) substrates at temperature (400±10 oC) with (120±10) nm thickness. The porous silicon substrates (one - side and two - sides) were formed by electrochemical etching of P - type (100) silicon wafers. Photodetector of (PS/c - Si/PS) has been fabricated and improved (ZnO/PS/c - Si/PS) and (IZO/PS/c - Si/PS) by deposited the transmittance conducting oxide (TCO). The porous silicon was macro pores (pore size > 50 nm) and the pore diameter ranging from (0.5 - 1 μ m), which formed by electrochemical etching on p - type (100) silicon wafer, the pores evidently randomly distributed on the porous silicon surface, the high density of pores has been observed and porosity is approximately (67%). The average thickness of front side (polish side) PS was approximately (6 μm) and about (3 μm) of back side (un - polish side). The surface morphology of the thin films deposited on porous silicon was high surface roughness compared with thin films deposited on glass substrates. The X - ray diffraction technique has showed that all prepared films on glass and PS substrates are polycrystalline structures of hexagonal wurtzite with preferential orientation of plan (002) direction and showed the new peaks depend on the substrate type, also from XRD see shifted in diffraction angle and decreased in crystal size by doping for films deposited on glass substrate from (31.18 nm) to (12.19 nm). AFM images showed that the surfaces morphology of deposited films on glass substrates that the IZO films seem smooth and uniform. The roughness of the films decreases with indium concentration 1% and then become very smooth with indium concentration 3%. The transmittance was very high for un - doped ZnO and IZO films within wavelength range (350 - 850 nm). The transmittance about (79%) before the doping effect then become (81 %) with doping concentration (1%) and decreased with doping concentration (3%) about (71%). The energy gap were (3.21eV), (3.22 eV) and (3.1 eV) of (pure ZnO), (IZO 1%) and (IZO 3%) respectively. The resistivity (ρᴏ) of IZO films at room temperature decrease with increasing of indium concentration (1% and 3%) concentrations. I - V characteristics observed the photocurrent increase under the illumination condition and increasing in indium concentration that result to increasing in photocurrent for all films. In the dark condition the dark current also increasing with increasing of indium concentration but this increases less than the increased under illumination condition. The spectral responsivity increased with increasing the wavelength for PS/c - Si/PS photodetector and become about (0.69 A/W) at wavelength (490 nm), also improved the spectral responsivity for the photodetector by deposited the transparent conducting oxide (ZnO and IZO) on porous silicon with different concentration of the indium. The spectral responsivity of (ZnO/PS/c - Si/PS) detector was equal (0.73 A/W) at wavelength (385 nm) while, the spectral responsivity of (IZO/PS/c - Si/PS) detector was (0.84 A/W) at wavelength (400 nm). The response time and recovery time also improved by deposited the (TCO). The response time decreased from (8 second) of PS/c - Si/PS photodetector to (4 second) by deposited IZO films with doping concentration (3%) and recovery time also decreased from (6 second) of PS/c - Si/PS to (2 second) of (IZO/PS/c - Si/PS).

تحضير ودراسة خصائص ZnO : Al على قواعد مختلفه كمتحسس غازي == Preparing and studying characterization of ZnO : Al with different substrates for gas sensor

Author name: ضيدان خلف كافي
Supervisor name: رعد سعدون صبري
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: تم في هذا البحث دراسة الخصائص البصرية والكهربائية والتحسسية لاغشية (ZnO) النقية والمشوبة بالالمنيوم (Al) بالنسب (1%,3%) المحضرة بطريقة الرش الكيميائي الحراري, والتي رسبت على قواعد زجاجية وسليكون وسليكون مسامي بدرجة حرارة (773±10oK)., وبسمك (350±10)nm.ولقد تم تحضير السليكون المسامي بواسطة الانوده الكهروكيميائيه على رقائق من السليكون نوع p type (100)بينت فحوصات نمط الحيود للاشعة السينية (XRD) لتشخيص طبيعة تبلور الاغشية المحضرة, حيث اظهرت النتائج ان جميع الاغشية المحضرة ذات تركيب متعدد التبلور من نوع سداسي hexagonal)).مع اتجاهيه (002 ) ومن خلال قياسات ماسح القوة الذرية AFM وقياسات المجهرالالكتروني الماسح SEM تم التعرف على تاثير القواعد المستخدمة على جميع خواص الاغشية, كما تبين من نتائج التشويب ان زيادة التشويب تؤدي الى النقصان في الحجم الحبيبي حيث تناقص الحجم الحبيبي من (39.38) الى (30.22) في حالة التشويب بنسبة 3% اشتملت الرسالة دراسة الخواص البصرية لاغشية اوكسيد الزنك النقية(ZnO) والمشوبة بالالمنيوم (AZO) على دراسة طيف النفاذيه (T᷊) لاغشية المحضرة حيث بينت النتائج ان اعلى نفاذيه تم الحصول عليها هي(85%) عند الاغشية غير المشوبة بينما كانت النفاذيه للاغشية المشوبة( %80) ولمدى اطوال موجيه300 - 900)nm.) , وتبين ايضا ان الامتصاصية بشكل عام تزداد بزيادة نسب التشويب لتصل اعلى قيمة عند النسبه3% بزيادة نسبة التشويب. تم حساب فجوات الطاقة البصرية للاغشية المشوبة وغير المشوبة وتبين ان فجوة الطاقة تقل بزيادة نسبة التشويب الى ان تصل الى اقل قيمة عند نسبة التشويب (3%). وكانت فجوة الطاقة Egتتراوح من(3.3eV)الى(3.1eV) بزيادة نسب التشويب. اظهرت القياسات الكهربائية ان التوصيلية الكهربائية المستمرة تزداد بزيادة نسبة التشويب لتصل اقصى قيمة عند النسبه 3% مع زيادة نسبة التشويب . وبينت القياسات ان الاغشية كافة تمتلك طاقتين للتنشيط (Ea1) و(Ea2) تقل قيمتهما بزيادة نسبة التشويب. كما بينت خصائص( تيار - فولتيه) ان الاغشيه تمتلك عامل مثاليه (2.3) للاغشيه المرسبة على السيلكون و(1.28) للاغشيه المرسبه على السيليكون المسامي . اما خصائص التحسسية لجميع الاغشية المحضره كانت تقاس بعد تعريضها الى( (750 ppm من بخار الايثانول والميثانول عند درجة حراره 473K. النتائج العملية بينت ان اغشية اوكسيد الزنك المشوبة بالالمنيوم والمرسبة على قواعد زجاجية وشرائح من السليكون وسليكون مسامي تحسن التحسسية لتلك الاغشية لبخار الايثانول والميثانول كما تبين ان افضل نتيجة سجلت كانت لاغشية AZO/PS المشوبة بنسبة 3% حيث كانت (37%) لبخار الايثانول و(35%)لبخار الميثانول بالاضافة الى ذلك تبين ان التحسسية لها علاقة نسبية لدرجات الحرارة وكمية الغاز. | In the present work, structural, optical, electrical and sensing properties have been studied for undoped and Al doped zinc oxide (ZnO) thin films with different aluminum doping concentrations (1% and 3% ) prepared by a chemical spray pyrolysis technique, deposited on glass, silicon, and porous silicon substrate at temperature (773±10)oK with (350±10)nm thickness, The porous silicon (PS) substrates were formed by electrochemical anodization on p - type (100) silicon wafer. The X - ray diffraction technique has showed that all prepared films are polycrystalline structure type of hexagonal wurtzite with preferential orientation of plan (002) direction .Surface analysis by SEM and AFM have been used to understand the effect of the substrate on morphology properties of the samples. The doping resulted in decreasing grain size i.e deteriorates the crystallinity of the films from (39.38nm)of pure ZnO to (30.22nm) of AZO(3%) doped. The measurements of optical properties transmittance of undoped and Al doped ZnO films show that higher transmittance was (85%) for undoped ZnO films while (80 % ) for doped Al films within wavelength range (300 - 900nm). Also the results have showed that absorbance increases with doping to reach maximum value at 3% concentration .The energy gap of ZnO was calculated for undoped and doped films .It is noticed that the energy gap decreases with the increases of doping until it reaches the minimum value at 3% doping concentration . The results of electrical properties have showed that direct current (D.C) conductivity increases by increasing doping to reach maximum value at 3% doping concentration. The results have showed that the films have two activation energy Ea1 and Ea2 . from I - V characteristics it's found that the minimum ideality factors (n =2.3) for AZO/Si and (n=1.28)for AZO/PS of the prepared heterojunction are observed in the interim bias voltage range. The sensing properties for all undoped and doped films were measured after films surface was exposed to 750 ppm from vapor ethanol and methanol gas at temperature of 473ºK . The experimental results of Al doping of zinc oxide thin films with different aluminum doping concentrations (1% and 3% ) which deposited on glass, silicon, and porous silicon substrate showed a good sensitivity to ethanol and methanol vapor. Also the influence of variation of Al concentration and type substrate on ethanol and methanol vapor sensitivity of thin film sensor elements was investigated in this work. Therefore , doping percentage ZnO : Al/PS of 3% concentration recorded the best result 37% for ethanol , 35% for methanol, thus the AZO/PS films are a good sensor for ethanol and methanol vapors. In addition ,the sensitivity is directly proportional with the operation temperature for limited range. In general the sensitivity increases by increasing the concentration of ethanol and methanol vapors with increasing temperature degree

دراسة طيفية ونظرية لمشتقات النايترون Nitron == Theorettiicall and Specttroscopiic Sttudiies off Niittron Deriivattiives

Author name: صلاح محمد علي رضا
Supervisor name: زياد عدنان صالح | فريال ولي عسكر
General topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: The main purpose of this thesis was to perform computational investigations on Nitron compound and its derivative( Nitro - Nitron) using Density Functional Theory (DFT) at an appropriate high level of theory and comparison with experimental data, in order to get better insight into the structures and energetic features of these compounds. The DFT calculations have been performed using Gaussian 09 program with GUI(Graphical User Interface) called Gaussview 5.08. The present study is separated in three parts, in part I, optimized geometrical parameters, vibrational frequencies, electronic maximum absorption wavelength in gas phase and solvent case (chloroform), and frontier orbitals (HOMO - LUMO), electrostatic potential surface (EPS), Mullikan and Natural atomic charge distributions of 1,4 - diphenyl - 3 - (phenylammonio) - 1H - 1,2,4 - triazolium(inner salt), (C20H16N4), commonly well - known as Nitron, were calculated by using DFT/B3LYP method with 6 - 311G(d,p) basis set. The Fourier Transform - Infrared (FT - IR) solid phase spectrum of the title compound was recorded in the spectral range (4000 - 400) cm - 1. The difference between the scaled wavenumbers and the observed values of most of the vibrational modes is nearly small. The UV - Vis spectrum was measured in the spectral range (200 - 800) nm in chloroform solution. The theoretical electronic (UV - Vis) spectrum calculated using the TD - DFT(C - PCM) method with chloroform solvent is more suitable than the gas phase to the experimental spectrum. The calculated HOMO and LUMO energies show that charge transfer occurs within the molecule.In part II of this thesis, the synthesis and characterization of a novel compound, (1,4 - Diphenyl - 3 - (p - nitrophenylamino) - 1,2,4 - triazolium hydroxide inner salt (Nitro - Nitron), (C20H15N5O2) were reported. The spectroscopic investigations of the novel compound were studied by 1H NMR, FT - IR, UV/Vis techniques. The 1H NMR spectra were recorded in DMSO solution. FT - IR spectrum in solid state was observed in the region 4000 - 400 cm - 1. The UV/Vis absorption spectrum of the compound which dissolved in chloroform was recorded in the range 200 - 800 nm. The structural data, fundamental vibrational modes, 1H NMR chemical shifts, frontier orbital energies(HOMO,LUMO), electrostatic potential surface (EPS), Mullikan and Natural atomic charge distributions, and band gap energy of the compound in the ground state were calculated using density functional theory(DFT) employing B3LYP/6 - 311G(d,p) basis set. The HOMO and LUMO analysis were used to elucidate information regarding charge transfer within the molecule. Based on the optimized geometry and by using time - dependent density functional theory (TD - DFT) methods in vacuum and solution(chloroform), the allowed excitation and oscillator strengths of electronic absorption spectrum were predicted. The solvation effects have been included by means of the conductor - like polarizable continuum model CPCM. chemical shifts were calculated using the Gauge - Independent Ato mic Orbital (GIOAO) method. In part III, The results of Hall effect and D.C electrical conductivity studies of the Nitron and its derivative (Nitro - Nitron) compounds are described in this part. The temperature dependence of semi - conductivity is also described. The values of carriers concentration, mobility, conductivity, resistivity, Hall coefficient, and thermal activation energy, are also presented.Finally, a comparison between the experimental data and the calculated results of three parts of this thesis appeared a good agreement

خصائص التفريغ الكهربائي لمنظومة بلازما المايكنترون (PM) للتيارات المستمرة ذات الاقطاب المستوية == Electrical discharge characterizations of dc - planar magnetron (PM) Plasma device

Author name: شيماء حسين عبد مسلم
Supervisor name: ابراهيم رمضان عاكول | محمد خماس خلف
General topic: Physics
Specific topic: Plasma Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: في هذا العمل, تم تصميم وتصنيع الماكنترون ذو الاقطاب المستوية لمنظومة الترذيذ بالبلارما وقد تم توليد المجال المغناطيسي للماكنترون بطريقتين , الاولى باستخدام ملف كهرومغناطيسي.والطريقة الثانية لتوليد المجال المغناطيسي هي باستخدام زوج من المغانط الدائمة .درست مميزات التيار - الفولتية لمسافات مختلفة بين الاقطاب ,ضغط الغاز, وتغير نسب خلط غاز الاركون الى غاز الاوكسجين وشدة مجال مغناطيسي مختلف .وقد بينت النتائج ان التفريغ ضمن منطقة التفريغ التوهجي غير الطبيعي. وان افضل مسافة بين الاقطاب هي 4.5 cm.وقد وجد ان تيار التفريغ يقل بزيادة نسبة غز الاوكسجين ويزداد بزيادة شدة المجال المغناطيسي.وقد تم الحصول على منحني باشن لمسافات بين الاقطاب مختلفة,ونسب خلط لغازي الاركون - الاوكسجين مختلفة , وشدة مجال مغناطيسي ومادة قطب مختلفة .كما تم دراسة تاثير المجال المغناطيسي على كفاءة التاين.تمت دراسة تاثير المجال المغناطيسي على معلمات البلازما باستخدام مجس لانكماير المفرد. وقد وجد ان درجة حرارة الالكترون(Te) تقل بزيادة ضغط الغاز والمجال المغناطيسي, كما لوحظ وجود درجتي حرارة للالكترون عند تسليط مجال مغناطيسي تبعا لمنشاها. بينما وجد ان كثافة الالكترونات تزداد بزيادة كلا من ضغط الغاز والمجال المغناطيسي.حضرت اكاسيد النحاس والالمنيوم والنيكل باستخدام منظومة ترذيذ البلازما بالماكنترون ذو الاقطاب المستوية للتيارات المستمرة على قواعد زجاجية بنفس الظروف (الفولتية المسلطة 1200 فولت,المسافة 4.5 cm , الضغوط تغيرت ما بين mbar (0.05 - 0.14) نسبة(9/1)Ar/O2 وB = 200Gauss).من القياسات البصرية وجدت ان اغشية CuO اظهرت النفاذية في نطاق 78 - 86٪ في حين انها كانت بين 82 - 91٪ و86 - 90٪ لل Al2O3 وNiO على التوالي. فجوة الطاقة البصرية انخفضت بشكل طفيف مع زيادة ضغط العمل، فاغشية CuO لديها فجوات الطاقة المباشرة (Eg) (تقل 2.35 - 1.95eV) انخفضت فجوة الطاقة Al2O3 من 4.2 eV الى 3.8 ، والفجوة NiO 4.1 - 3.9 eV)) عند زيادة الضغط mbar (0.05 - 0.14).اظهرت نتائج تحليل حيود الاشعة السينية ان بنية الاغشية CuO هو متعددة البلورات ذات تركيب احادي الميل الاتجاه المفضل في (110) و(111). بينما يظهر Al2O3 طبيعة عشوائية. وحددت الاغشية NiO ان تكون الطابع متعدد التبلور مع بنية مكعب على طول (111) و(101) التوجه. وعلاوة على ذلك، تم العثور على Ni2O3 بواسطة حيود الاشعة السينية.وقد تم دراسة مورفولوجية سطح اغشيه CuO، Al2O3، وNiO باستخدام مجهر القوة الذرية (AFM)، ومجهر الماسح الالكتروني (SEM) واظهرت النتيجة ان كل الاغشية لها حجم نانوي ، ويزداد الحجم الحبيبي مع زيادة ضغط العمل .وقد تم قياس حساسية الافلام CuO، Al2O3، وNiO لغاز NO2 في الهواء المحيط في نظام الاستشعار الغاز. تم اختبار جميع العينات بنسبة 3٪ NO2 والجهد التحيز (6 فولت).اقصى حساسية لCuO هي (43%)مع وقت استجابة سريع (11.7s) ووقت الاسترداد (17.1s) ووجد ان افضل درجة حرارة عمل للمتحسس 170oC. وحساسية NiO في الضغط الامثل ( mbar0.08) 11.86% مع زمن الاستجابة (47.7s) ووقت الاسترداد (35.1s) في افضل درجة حرارة عمل للمتحسس 180 درجة مئوية. بينما لا استجابة Al2O3لغازNO2 .تم داسة خصائص اغشية اوكسيد النيكل الالكتروماتيكية ,حيث وجد من القياسات البصرية باستخدام اللوكس ميتر ,ان ضغط العمل الامثل كان 0.08 ملي بار حيث تمتلك الاغشية المحضرة نفاذية اعلى في حالة التبيض، ومعامل امتصاص اكبر عند عكس القطبية المسلطة ، مقارنة مع ضغوط العمل اخرى. | In this work, a DC planar magnetron of plasma sputtering device has been designed and constructed. The magnetic field of magnetron generated by using two ways, firstly, electromagnetic coil. Secondly the magnetic field generated by pair of permanent magnets. The current - voltage characteristics have been studied at different inter - electrodes spacing, gas pressure, argon - oxygen mixture, and magnetic field strength. The result shown that the discharge is operating in the abnormal glow region. The optimum inter - electrode spacing was 4.5cm, and the discharge current decreased by increasing O2 percentage and increased by increasing magnetic field strength. Paschen curves have been obtained at different inter - electrodes spacing, argon - oxygen mixture, magnetic field strength and cathode materials. Also the effect of magnetic field on the ionization efficiency has been studied. The effect of magnetic field on plasma parameters are investigated by using a single Langmuir probe. It is found that the electron temperature decreases with increased working pressure and magnetic field, also when the magnetic field applied the probe measured two electron temperatures (Te) according to their origin. While electron density increased with both increasing working gas pressure and magnetic field strength Copper oxide, aluminum oxide, and nickel oxide thin films are prepared using dc - planar magnetron plasma sputtering system on the glass substrate at the same conditions( applied voltage (1200 volt) distance 4.5 cm working pressure varied between (0.05 - 0.14)mbar (9/1) Ar/O2 ratio and B=200 Gauss. From optical measurements have found that, the CuO thin films have showed transmittance in 78 - 86% range whereas it was in between 82 - 91% and 86 - 90% for the Al2O3 and NiO thin films respectively. The optical energy gap decreased slightly with increase working pressure, since CuO films have the direct energy gaps (Eg) (2. 35eV decreases to 1.95eV), Al2O3 band gap decreased from 4.2 eV to 3.8 eV , and band gap of NiO (4.1 to 3.9 eV) at pressure increased from 0.05 to 0.14 mbar. X - Ray diffraction analysis have showed that the structure of CuO films is polycrystalline with monoclinic structure and preferential orientation in the (110), and(111) directions. While Al2O3 shows amorphous nature. The NiO films are identified to be polycrystalline nature with cubic structure along (111) and (101)orientation. Furthermore, Ni2O3 is found by XRD. The surface morphology of CuO, Al2O3, and NiO thin films have been studied by using Atomic Force Microscope (AFM) and Scanning Electron Microscope (SEM). The result is showed that all film had nano size structure, and the grain size increased with increased working pressure.The sensitivity of CuO, Al2O3, and NiO films to NO2 gas in air ambient has been measured in gas sensing system. All samples are tested at 3% NO2 and bias voltage (6 volt). The maximum sensitivity of CuO is (43%) with the fast response time (11.7s) and recovery time of (17.1s) at optimal operating temperature 443.15 kelvin. And the sensitivity of NiO at the optimum pressure (0.08 mbar) is found 11.86% with the response time (47.7s) and recovery time of (35.1s) at optimum operating temperature 180 oC, While Al2O3 not response towards NO2gas. Electrochromic (EC) properties of nickel oxide films have been studied, They were characterized by optical measurements by using lux meter ,the optimizing working pressure was 0.08 mbar, since the prepared films have a higher transmittance in the bleached state, and larger absorptance when the opposite polarity was applied, compared to another working pressures.

دراسة تحليلية للحام بالليزر على الخواص الحرارية - الميكانيكية للبوليمرات باستخدام برنامج ANSYS == Analysis Study of Laser Welding on Thermal - Mechanical Properties of Polymers Using ANSYS Program

Author name: زينه يونس علي
Supervisor name: خالد هادي مهدي العبيدي | ندى فاضل توفيق
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: الخلاصةان الهدف من هذه الدراسة, هو التنبؤ بسلوك المواد من حيث الخصائص التركيبية ,الحرارية والميكانيكية اثناء عملية اللحام في 3 - D. ان دراسة الخصائص التركيبية للمادة قد تم باعتبارها دالة لدرجة حرارة الانتقال الزجاجي T_g, ودرجة حرارة الانصهار T_m, وتغير الطور بينما يتم دراسة الخصائص الحرارية وفقا لتوزيع درجات الحرارة, والتدرج الحراري, والفيض الحراري, واخيرا يتم دراسة الخواص الميكانيكية بواسطة الاجهاد والمطاوعة.لقد تم تبني طريقة FEM لمحاكاة عملية اللحام لقطعتين متشابهتين ومختلفتين من مادة البولي بروبلين والبولي ستيرين في ثلاثة ابعاد. ان تحليل الخصائص الحرارية والميكانيكية لبوليمر البولي بروبلين والبولي ستيرين قد تم بدلالة كل من نموذج الحالة المستقرة والنموذج المتنقل باستخدام برنامج ((ANSYS 11. حيث ربط نموذج الحالة المستقرة (اعتبرت انها الحمل الابتدائي) مع نموذج الحالة المتنقلة بافتراض وجود الحمل الحراري والميكانيكي سوية بنفس الوقت على اعتبار ثبوت سرعة اللحام عند20ملي/ثانية ودرجة الحرارة عند 298م, وكذلك تم اختبار تاثير قدرة الليزر باستخدام ثلاثة قيم 50) (150,100 واط, كذلك درست تاثير نصف قطر بقعة الليزر على خصائص البوليمرات المستخدمة.بينت النتائج العددية قابلية لحام كل من المادتين البولي بروبلين والبولي ستيرين بهذه الطريقة, حيث لوحظ تناقص التشوهات الحرارية والميكانيكية الناجمة عن اللحام, كما يشير الشكل الهندسي هذه الاجهادات الى جودة اللحام. وبينت الدراسة ان كل من الفيض الحراري والانحدار الحراري يكون عند اعظم قيمها في اتجاه y - axis وهو اتجاه تسليط الليزر, وكانت درجة الحرارة العظمى في لحام كل من PP - PPو PP - PS هي ((351.4kو (425.9k) على التوالي. اما الاجهادات الميكانيكية فقد كانت واطئة في كل من PP - PPو PP - PS بحدود (0.181*〖10〗^9MPa ) و(0.166*〖10〗^9MPa) والمطاوعة (0.171) و(0.142) لكل من PP - PP وPP - PS على التوالي. واخيرا، لوحظ صغر مساحة المنطقة المتاثرة حراريا اذ كانت بحدود (9.2 〖mm〗^2) بالنسبة ل PP - PP، في حين اظهر عمق الاختراق تحسن مقارنة مع الاساليب المستخدمة، حيث كانت قيمته بحدود (2.5mm), اما في نموذج المتنقل فقد لوحظ تضاعف المساحة المتاثرة وعمق اختراق قريب من نتائج النموذج المستقر. | The aims of this study is to estimate the material behavior properties in terms of its structure, thermal and mechanical properties during welding process in 3 - D. The structure is studied as a function of T_m , T_g and phase change. While the thermal is investigated according to thermal distribution, thermal gradient and thermal flux. Finally the mechanical is examined by stress and strain.Finite element method is adopted to simulate welding process of two similar and dissimilar pieces of polypropylene and polystyrene in 3 - D.The analytical of thermal and mechanical properties is done in terms of steady - state model and transient model using ANSYS 11 program, then coupling the steady - state with transient model by supposed existing thermal and mechanical loads together in same time. Laser power effect on welding is investigated by three powers (50,100,and 150watt) and by laser spot radius (1mm, and 2mm), the welding speed is supposed constant at (20mm/sec).Numerical results show that the ability of this method to joined polymers material PP and PS, where it is noticed that the thermal and mechanical deformations are reduced, also the geometry shape of welding zone is indicated to a good quality of welding.From this study, the thermal gradient and thermal flux are at their maximum values at y - axis, in which the laser direction, and T_max in PP - PP and PP - PS joints are (351.4k) and (425.9k) respectively. Mechanical stresses and strains had low values, about (0.181*〖10〗^9MPa) and (0.166*〖10〗^9 MPa) and strain are about (0.171) and (0.142) for PP - PP and PP - 1PS joint respectively.Finally, it is observed that narrow HAZ area (9.2〖mm〗^2) of PP - PP joint, while penetration depth shows improvement comparing with usual methods, it's value is (2.5mm). In transient model it observes that multiples of HAZ area, and D_p is near its value in steady - state model.

الاستقرارية الفيزيائية - الكيميائية للمتراكبات PVA - MnSO4.H2O مع الظروف الجوية == Physico - Chemical Stability of (PVA - MnSO4.H2O) Composites against weather conditions

Author name: زينب كاظم حمزة
Supervisor name: اسرار عبد المنعم سعيد
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: في هذه الدراسه تم تحضير افلام بولي فينيل الكحول وكبريتات المنغنيز المائي باستخدام تقنية الصب مع نسب وزنية مختلفة وهي (2, 5, 10, 15) من كبريتات المنغنيز المائي وقد تم دراسة الخصائص البصريه لها.وقد تضمن هذا العمل ايضا دراسة تاثير الظروف الجوية على الخصائص البصرية لكل النماذج المعرضة.كل النماذج المعرضة وغير معرضة للظروف الجويه شخصت بطرق مختلفة مثل التحليل الطيفي لاشعة تحت الت الحمراء (FTIR)وصور المجهر الضوئي.اظهرت النتائج التجريبية ان طيف الامتصاصيه يزداد بزيادة تركيز كبريتات المنغنيز المائي. فجوة الطاقة تقل بزيادة تركيز الاضافة. وقد تم دراسة الثوابت البصرية الاخرى والتي تشمل (معامل الامتصاص, معامل الخمود, معامل الانكسار, ثابت العزل الحقيقي والخيالي).بعدتعريض النماذج للبولي فينيل الكحول النقي وللمتراكبات (PVA - MnSO4.H2O) وبتراكيز مختلفه وجد ان طيف الامتصاص يزداد بزيادة فترة التعريض. فجوة الطاقه تقل بزيادة فترة التعريض. وقد تم دراسة الثوابت البصريه الاخرى والتي تشمل (معامل الامتصاص, معامل الخمود, معامل الانكسار, ثابت العزل الحقيقي والخيالي).وقد بين طيف (FTIR) عدم وجود تفاعل كيميائي بين المادة المضافة والبوليمر وليس هنالك تكسر بالاواصر الاساسيه لهما بعد التعريض للظروف الجوية, واظهرت صور المجهر الضوئي ان كل النماذج تصبح اكثر خشونة بعد التعريض. | In this study, (PVA - MnSO4.H2O) films are prepared by using casting technique with different concentration of Manganese (II) sulfates monohydrate (2, 5, 10 and 15) wt.% . Also the optical properties is studied, and this work is involved with study the effect of weathering condition of optical properties for all samples which exposure. All the samples that exposure and unexposure to weather conditions have diagnosed by different methods such as fouirer transform infrared spectroscopy (FTIR) and optical microscope images. The experimental results show that the absorption spectrum increased with increasing the concentration of (MnSO4.H2O). The optical energy gap decreasing with increasing of the concentration of the additive. The optical constants (absorption coefficient, extinction coefficient, refractive index, real and imaginary dielectric constants) are studied. After exposure the samples in the form of pure PVA and (PVA - MnSO4.H2O) composites with different concentration found that the absorption spectrum increases with increases exposure time. The optical energy gap decreasing with increasing exposure time. The optical constants (absorption coefficient, extinction coefficient, refractive index, real and imaginary dielectric constants) are studied. The FTIR shows no chemical interaction between the Polymer and the additives and there are no broken fundamental bands after exposure to the weather conditions. Morphological photographs illustrate that the surface of all films become more roughness after exposure.

تصميم وتصنيع طلاء بصري مضاد للانعكاسية متعدد الطبقات لمجمعات الطاقة الشمسية الحرارية ذات التزجيج الملون == Design and Fabrication of Optical Multilayer Anti - reflection Coating for Colored Glazed Thermal Solar Collectors

Author name: زينب ارحيم حسين الاسدي
Supervisor name: عبد الحسين خضير لطيف | امال محمد الحلو
General topic: Physics
Specific topic: Solar Energy Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: يلعب الجانب الجمالي للمجمعات الشمسية الحرارية دورا هاما في تكامل واجهات المباني ويستند المظهر الملون الى مبدا التداخل لطلاء الاغشية الرقيقة على الجانب الاخر من الغطاء الزجاجي . ان وجود طبقات متعددة للمرشحات البصرية التداخلية على المجمعات المزججة يمكن ان ينتج انعكاس ملون في المنطقة المرئية ولا يحدث المظهر الملون خسائر مفرطة للطاقة بينما ينفذ الجزء غير المنعكس في منطقة الاشعة تحت الحمراء القريبة داخلا على شريط الامتصاص لزيادة كفاءة المجمع الشمسي الحراري . تقدم هذه الدراسة فكرة بسيطة للحصول على تزجيج ملون لاخفاء اللون الاسود والانابيب الظاهرة وتموجات شريط الامتصاص المعدني للمجمعات الشمسية الحرارية والتي تعتبر عقبة اساسية في تكامل المجمعات الشمسية الحرارية كواجهات للمباني وذلك بتصميم طبقات متعددة لمرشحات بصرية تداخلية من خلال محاكاة نظرية ومن ثم تصنيع هذه التصاميم عمليا ومقارنة النتائج عمليا ونظريا . تـم توظيـف مواد عازلة ملائمـة مثـل ثنائـي اوكسيد السليـكون (SiO2)ذو معامـل الانكسار العالـي nH =1.47 ومغنيسيوم فلورايد (MgF2) ذو معمل الانكسار الواطيء nL =1.38 وبسمك ربع طول موجي (H) و(L) لمعامل الانكسار العالي والواطيء على التوالي . استخدام برنامج الماتلاب في جزء المحاكاة النظري والذي صمم لهذه الدراسة . تم تصميم نموذجين بصريين كما تم استخدام نوعين من القواعد الزجاجية . ان اول نموذج بصري هو HL//glass لقيمتين من الطول الموجي المستخدم للتصميم (0) = 558 نانومتر و700 نانومتر ومن 2 - 40 طبقة . تم استخدام نوعين من القواعد الزجاجية ، النوع الاول شريحة زجاج مجهرية ذات معامل انكسار 1.5131 استخدم في هذا النموذج البصري طولين موجيين للتصميم 0 = 558 نانومتر و700 نانومتر ، النوع الثاني من القواعد الزجاجية هو BK7 ذو معامل الانكسار 1.515 استخدم في هذا النموذج البصري عندما طول موجة التصميم 0 = 700 نانومتر . النموذج البصري الثاني LH//glass تم باستخدام قاعدة زجاجية لشريحة مجهرية ولطول موجة التصميم واحد وهو 0 = 558 نانومتر من 2 - 40 طبقة . هذه التصاميم صنعت عمليا باستخدام تقنية الترذيذ بالتردد الراديوي ذو المغناطيس المستوي ، عشر طبقات رسبت بالتعاقب على شريحة زجاجية مجهرية من (SiO2) ذو معامل الانكسار العالي (H) و(MgF2) ذو معامل الانكسار الواطيء (L) على التوالي للتصاميم البصريةHL//glass وLH//glass عند طول موجة التصميم 0 = 558 نانومتر . كذلك عشر طبقات رسبت على القاعدة الزجاجية BK7 للنموذج البصري HL//glass عند 0 = 700نامومتر ولكن عند استخدام القاعدة الزجاجية للشريحة المجهرية للنموذج البصري HL//glass عند 0 = 700 نانومتر رسبت 16 طبقة من هاتين المادتين العازلتين . اظهرت المحاكاة الحاسوبية السلوك البصري لهذه المرشحات من 2 - 40 طبقة ولاعداد فردية وزوجية من الطبقات مثل الانعكاسية المرئية (Rvis.) ، الانعكاسية الشمسية (Rsol.) ، اعظم قمة لمنحني طيف الانعكاسية في المنطقة المرئية (RMax.) ، النفاذية الشمسية (Tsol.) وعامل الجدارة (M) . عمليا تم حساب (RMax.) و(Rsol.av.) و(Tsol.av.) . ان التحدي في هذه الدراسة هو ايجاد افضل نموذج بصري يمتلك اقل انعكاسية شمسية (Rsol.) واعظم نفاذية شمسية (Tsol.) لزيادة كفاءة المجمع الشمسي الحراري وفي نفس الوقت الحصول على انعكاس ملون يكسب المجمعات الشمسية الحرارية التي تستخدم كواجهات للابنية جانب جمالي . لقد وجد عمليا ان التصميم البصري الثاني (L/H//microscopic glass slide) عند0 = 558 نانومتر يمتلك اقل (Rsol.) واعلى (Tsol.) من البداية عند طبقتين حتى الوصول الى الطبقة العاشرة والتي تمتلك (Rsol.) =18.56025 % و(Tsol.) = 81.33469 % لذلك يمكن اعتبار هذا النموذج هو افضل نموذج بصري يمتلك اعلى كفاءة شمسية حرارية ويظهر انعكاس ملون (اخضر) جيد . لكن يعتبر عمليا النموذج البصري الاول (H/L//microscopic glass slide) عند0 = 700 نانومتر هو افضل نموذج بصري يستخدم للتلوين . ان المرشحات البصرية التداخلية متعددة الطبقات تظهر في هذه الدراسة انعكاس ملون اخضر في المدى المرئي ونفاذية مقبولة ومنطقة مضادة للانعكاسية في مدى الاشعة تحت الحمراء القريبة . بالرغم من زيادة طول موجة التصميم(0) عمليا من 558 الى 700 نانومتر تبقى هذه المرشحات تظهر انعكاس ملون اخضر .نجحت هذه الدراسة منذ البداية في اظهار ان الطلاء الترذيذي متعدد الطبقات حقق المتطلبات التالية : ا - امتصاصية شبه صفرية .ب‌ - قمة انعكاسية لونية في المنطقة المرئية .ت‌ - نفاذية شمسية مقبولة . | An aesthetic aspects play an important role in facades integration buildings of the thermal solar collectors , the principle of the colored appearance is based on interference in the thin - films coating on the reverse side of the cover glass . The presence of multilayered optical interference filters on the collector glazing can produce a colored reflection in the visible region , the colored appearance should not cause excessive energy losses , while transmitting the non - reflected radiation in the near IR region entirely to the absorber sheet to increase the efficiency of the thermal solar collector . This study presents simple idea to get a colored glaze to hide the black color, and the visibility of tubes and corrugations of the metal sheet (absorber) of the thermal solar collectors which is considered the main obstacle to facade integration buildings of solar thermal collectors by designing a multilayer optical interference filters during theoretical simulation and fabricate these designs experimentally then compare the theoretical and experimental results . Appropriate dielectric materials, silicon dioxide (SiO2) of high refractive index nH =1.47 and magnesium fluoride (MgF2) of low refractive index nL =1.38 were employing with quarterwave thicknesses (H) & (L) for high and low refractive index layers respectively . In theoretical simulation part a matlab program has been used which was designed for this study . Two optical models were designed and two kinds of glass substrates were used . The first optical model is HL//glass , for two design wavelength values (0) 558 nm and 700 nm from 2 - 40 layers . Two types of glass substrate were used , the first one was microscopic glass slide substrate with refractive index 1.5131 , it was used in this optical model two types of design wavelength (0) = (558 & 700) nm , the second kind of glass substrates was BK7 (Borosilicate Crown) glass with refractive index 1.515 it was used in this optical model when the design wavelength 0=700 nm . The second optical model is LH//glass by using microscopic glass slide substrate for one design wavelength is 0= 558 nm and for 2 - 40 layers. These designs were fabricated experimentally by using RF planer magnetron sputtering technique , 10 layers for high refractive index (H) (SiO2) and low refractive index (L) (MgF2) were deposited alternately for the optical models HL//glass and LH//glass at 0= 558 nm on the microscopic glass slide . Also 10 layers were deposited on BK7 glass substrate for the optical model HL//glass at 0= 700 nm but by using microscopic glass slide substrate for the optical model HL//glass at 0= 700 nm there were 16 layers deposited from these two dielectric materials . The computer simulation exhibit the optical behavior of this filters from 2 - 40 layers and for odd and even numbers of layers such as visible reflectance (Rvis.), solar reflectance (Rsol.), maximum peak of reflectance spectrum curve (RMax.) in the visible region , solar transmittance (Tsol.) and merit factor (M) . Experimentally (RMax.) , (Rsol.av.) and (Tsol.av.) were calculated . The challenge in this study is to find the best optical model which has less (Rsol.) and larger (Tsol.) to increase the efficiency of the thermal solar collector and in the same time get the colored reflection to gain esthetic aspect for the thermal solar collectors which was used as building facades . It is found experimentally that the second optical model (L/H//microscopic glass slide) at 0= 558 nm have low (Rsol.) and high (Tsol.) from the beginning at 2 layers until reaching the 10 layer which has (Rsol.)= 18.56025 % and (Tsol.)= 81.33469 % , therefore this model can be considered as the best optical model which has higher solar thermal efficiency and exhibits good )green( colored reflection . But the first optical model (H/L//microscopic glass slide) at 0= 700 nm was considered experimentally the best optical model used for coloration . The multilayer optical interference filters in this study exhibit green colored reflectance in the visible range and acceptable transmission and antireflection region in near IR range . Despite the increase in design wavelength (0) from 558 nm to 700 nm . These filters experimentally remain exhibit green colored reflection . This study was succeeded at the first attempt to show that a sputtered multilayer coating can fulfilled the requirements

تحضير ودراسة الخصائص الامتصاصية لاكاسيد الفيرايت باستخدام طريقة السيراميك == Preparation and Study the Absorption Properties of Ferrite Oxides using Ceramic Method

Author name: زياد طارق اسماعيل العبوسي
Supervisor name: كاظم جواد كاظم الشجيري
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: Compounds of ferrimagnetic materials were prepared in this work in order to investigate and evaluate the microwaves absorption at X - band with the range of frequencies (8 - 12.5 GHz) and Ku - band with the range of frequencies (12.5 - 18 GHz). And the second band is used for the first time in Iraq.Conventional Ceramic techniques (the solid state reaction method) were used to prepare three compounds of spinel ferrite : Cu - Zn ferrite, with formula (Cu1 - xZnxFe2O4), Mg - Zn ferrite, with formula (Mg1 - xZnxFe2O4), and Ni - Zn ferrite, with formula (Ni1 - xZnxFe2O4) at values of x = (0.0, 0.1, 0.3, 0.4, 0.5, 0.6), where x is the proportion of zinc in the ferrite, as bulk (54) samples of rectangle in dimensions (22.6*10*10 mm) within in X - band refine it to make its dimensions (15.5× 7.5×10) mm within in the Ku - band.The resonance peaks of three types of spinel ferrite appeared at the frequencies (9, 10, 11, 14, 15, 16, 17) GHz, and these peaks remain at the same frequencies with a different thickness for all types of ferrite, this indicates that the peaks are not related to thickness.For all samples it was found that the effect of increase the thickness and sintering temperature increased the values of attenuation and absorbance. And the best values of the absorbency were in the range of (Ku - band).The value of total transmission and the absorbance is 100% for sample of (Ni0.9Zn0.1Fe2O4) were the best values at (1050) °C then (14) GHz.The best results were obtained in this research, and the best values of absorbance and stability are (CuFe204, Cu0.9Zn0.1Fe2O4, Cu0.9Zn0.1Fe2O4,Cu0.4Zn0.6Fe2O4) that had been burned by (1000, 1050, 1100, 1050) respectively. These samples were range of (Ku - band).The best result was similarity in behaviour of absorbance for the sample (Mg0.6Zn0.4Fe2O4) at the range (X - band).X - ray diffraction results showed that the structure was polycrystalline for all samples and for all (X) values.The density of samples greatly depends on the temperature of sintering, witch increases proportionally with the temperature of the sintering

المقاطع العرضية لتفاعلات القنص والجسيمات المشحونة لانتاج نظائر اليود الطبي المشع == Capture and Charged Particles Reactions Cross Sections for Production of Iodine Medical Radioisotopes

Author name: رغد سعدون محمد
Supervisor name: ايمان طارق العلوي
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: تعددت الوسائل التي يحاول الاطباء من خلالها الكشف المبكر عن الامراض السرطانية ومن ثم السيطرة عليها قبل ان تتفاقم ويصعب علاجها. ان اخر ما توصل اليه الطب الحديث للحد من انتشار هذه الامراض هو استخدام نظائر المواد المشعة في علاج بعض الامراض وتشخيص البعض الاخر حيث يلعب النشاط الاشعاعي المنبعث من انحلال النظائر المشعة مثل انبعاث الكترونات اوجر والبوزترونات واشعة كاما دورا هاما في التطبيقات الطبية التشخيصية والعلاجية, ان الانوية المشعة ذات الاعمار النصفية الصغيرة (بضع ساعات) تكون ملائمة للحالات التشخيصة وهذا مايسمى التصوير بواسطة الانبعاث البوزتروني (PET) او بقياس طاقة فوتون كاما المنفرد (SPET) حيث تعطي هذه التقنيات صور ثلاثية الابعاد للعضو المراد فحصه, اما الحالات العلاجية فان الاشعة المؤينة المنطلقة لمسافات قصيرة تكون ملائمة لاختراق الانسجة وتغير تركيب الحمض النووي للانسجة المصابة. هذه النظائر يتم انتاجها بواسطة معجلات او مفاعلات نووية خاصة لهذه الاغراض ومن ثم يتم التاكد من نقائها من الشوائب النووية التي تظهر في عملية الانتاج قبل اعطائها للمريض . مما تقدم تم اختيار نظائر اليود المشع (I; A= 119→126, 128, 130, 131) في هذه الدراسة لان معظم نظائره ذات اعمار نصفية ملائمة للحالات العلاجية والتشخيصية. ان الطرق الرئيسية لانتاج اليود هو باستخدام الاهداف , , والتي تضمنت 38 تفاعل مباشر و9 تفاعلات غير مباشرة. وقد تم حساب المقاطع العرضية لتفاعلات (p,γ)و (p,α)و(p,xn) و(d,xn) و(α,xn) لانتاج نظائر اليود المشع حيث تم تقييمها في العمل الحالي اعتمادا على القيم العملية المتوفرة في مكتبة (EXFOR) التابعة لوكالة الطاقة الذرية الدولية (IAEA) حيث احتوت مكتبة (EXFOR) على البيانات العملية للمقاطع العرضية المقاسة لعدة سنوات سابقة ولعدة باحثين حتى الوقت الحالي. ان افضل التفاعلات لانتاج I - 123 هما و, وكذلك افضل التفاعلات لانتاج I - 124 هما و, ولانتاج I - 125 فان افضل تفاعل هو كون هذه التفاعلات تتمتع بانتاج عالي وشوائب قليلة ضمن مدى طاقي قليل. وان افضل تفاعل لانتاج I - 131 هو التفاعل غير المباشر لاهميته باستخدامه في (SPET) لغرض تصوير الغدة الدرقية وكذلك لعلاج سرطان الغدة الدرقية. لقد تم تحليل مديات الطاقة الكاملة لكل تفاعل وقد تم اعادة حساب المقاطع العرضية بفترات صغيرة لطاقة البروتون او الديتريون او جسيمة الفا الساقط بلغت (0.01MeV) مع الاخطاء المرافقة لها. وبذالك تم حساب المقاطع العرضية المختارة لانتاج نظائر اليود المشع وايجاد معادلات الملائمة من نوع Polynomials لعدة مراتب n= 4→10 والتي تربط بين تغير المقطع العرضي مع الطاقة والتي يمكن استخدامها للتنبؤ بقيم المقاطع العرضية غير المحسوبة. لقد تم حساب مستوى الشوائب التي تظهر في عمليات انتاج النظائر التي لها اعلى تطبيقات طبية واختيار افضل منطقة ذات مدى طاقة يتم تحديده باستخدام السايكترون للحد من ظهور الشوائب النووية وتم الحصول على توافق جيد بين النتائج النظرية والنتائج العملية المتوفرة. لقد تم حساب قدرة الايقاف على اساس صيغة زكلر من اجل حساب ناتج (yield) كل تفاعل وحساب سمك الهدف. وقد تم حساب قيمة Q وطاقة العتبة وطاقة الربط والمقاطع العرضية لنظائر اليود المختارة. تم بناء البرامج الحسابية Recom.m وStopp.m وStopd.m وStopa.m وYield.m وImpurity.m في العمل الحالي باستخدام Matlab - 8 اضافة لاستخدام برنامج SRIM (2003) لاجراء الحسابات. | There are many ways in which doctors attempt to early detection of cancer and then control it before it worsen and becomes difficult to treat. The latest findings of modern medicine to reduce the spread of these diseases is the use of isotopes of radioactive Iodine in the treatment of some diseases and diagnosis of others where it plays radioactivity emitted from the dissolution of radioactive isotopes, such as the emission of Auger electrons, positrons and gamma rays which play an important role in medical applications of diagnostic and therapeutic. The half - life of radioactive nuclei with a few hours are appropriate for situations diagnostic and this called imaging by Positron Emission Tomography (PET) or Single Photon Emission Tomography (SPET). These techniques give a three - dimensional picture of the organ to be scan, either cases the therapeutic ionizing radiation emitted over short distances are appropriate to penetrate the tissue and change the structure of DNA of the infected tissue. These principals are produced by accelerators or nuclear reactors, especially for this purpose and then be sure of the purity of nuclear impurities that appear in the production process before giving it to the patient. Isotopes of radioactive Iodine (I; A= 119→126, 128, 130, 131) have been selected in the present work. Since they have suitable half - life that could be used for treatment and diagnostic. The main production routes, use , , targets, including 38 direct reactions and 9 indirect reactions. Exciitation functions for proton, deuteron and alpha particles for the reactions (p,xn), (p,α), (p,γ), (d,xn), (α,xn) (n,p) for the production of isotopes of radioactive Iodine have been evaluated using an experimental of energy of incident particles and cross sections published in the International Atomic Energy Agency (IAEA), especially (EXFOR) library which measured cross sections for different authors and for several years prior to the present. The best reactions for the production of Iodine - 123 are the reaction and reactions, while the best reactions for the production of Iodine - 124 are and reactions. For the production of Iodine - 125, the best reaction is , because it possesses less impurities and low energy ranges and higher yields. While the best indirect reaction for the production of Iodine - 131 is for its importance using in (SPET) for imaging of the thyroid gland and as a therapy by thyroid cancer. The analysis of a complete energy range has been done for each interaction. The cross sections are reproduced in fine steps of incident proton or deuteron or alpha particle energy in 0.01MeV intervals with their corresponding error. Therefore, the selected cross section for the production of radioactive Iodine isotopes have been calculated with a polynomials fitting with a degree n=4→10 that could be used for the prediction of un calculated cross sections. Level of impurities that appear in the isotope production processes that which have the highest medical applications have been calculated. The best area of useful energy range has been chosen by using cyclotron to reduce the appearance of nuclear impurities The stopping power according to Zeigler formulae was used in order to obtain the yield for each reaction and to calculate the target thicknes. Q - value, threshold energy and binding energy for selected Iodine isotopes were also calculated. The programmes of Recom.m, Stopp.m, Stopd.m, Stopa.m, Yield.m and Impurity.m, have been built in the present work using Matlab - 8 to calculate the results of the present work, as well as SRIM (2003) program were used

الخصائص الفيزيائية لاغشية اوكسيد الخارصين المشوبة تشويبا مشتركا بالبورون والالمنيوم == Physical Properties of Aluminum and Boron co - doped Zinc Oxide Thin Films

Author name: رشيد هاشم جبار
Supervisor name: انوار حسين علي الفؤادي
General topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: في هذا البحث تم تحضير اغشية اوكسيد الخارصين النقي ZnO والمشوبة تشويبا مشتركا بالبورون والالمنيوم ( AZB) بنسب تشويب (2, 4, 6, 8 %)، اي [ZnO : (B 1%+Al 1%), ZnO : (B 2%+ Al 2%), ZnO : (B 3%,Al 3%), ZnO : (B 4%,Al4%)]. اذ تم تحضير الاغشية بطريقة التحلل الكيميائي الحراري بدرجة حرارة القاعدة مقدارها(450 ±10 oC) وسمك (150±5 nm) على قواعد زجاجية وسليكون مسامي من النوعين (n, p) بمقاومية مقدارها(0.05 - 0.1 Ω.cm) واتجاه بلوري (111). تم تصنيع مفارق هجينة من انواع : ( ((ZnO, AZB)/p - PS/Si, (ZnO, AZB)/n - PS/Si ، وتم تحضير طبقة السليكون المسامي بطريقة التنميش الكهروكيميائية والكهروكيميائي تحت تاثير ضوء الهالوجين على قواعد السليكون للنوعين (n, p) بكثافة تيار مقدارها (30 mA) وزمن مقداره (30 minutes) . تم دراسة طبوغرافية سطح الاغشية وللسليكون المسامي باستعمال المجهر الالكتروني الماسح (SEM)، مجهر نفاذية الالكترونات (TEM) ومجهر القوة الذري (AFM) فتبين ان التركيب السطحي للاغشية المرسبة هو تركيب نانوي يتناقص فيه الحجم الحبيبي مع زيادة نسب التشويب المشترك اذ بلغت قيمة اصغر حجم حبيبي 7.5 nm))، وان خشونة السطح تزداد مع زيادة التشويب المشترك وتتغير من(1.34 - 6.15 nm) ومن (6.4 - 12.12)للاغشية المرسبة على الزجاج والسليكون المسامي على التوالي، واظهر جهاز حيود الاشعة السينية (XRD ) ان اغشيية ZnO المحضرة النقية والمشوبة ذات تركيب متعدد التبلور ومن النوع السداسي المتراص (hexagonal wurtzite). تم دراسة الخصائص البصرية للاغشية المحضرة بوساطة قياس طيف النفاذية والامتصاصية عند درجة حرارة الغرفة لمدى طول موجي يتراوح من (300 - 1100 nm) تبين ان النفاذية البصرية للاغشية النقية (87 %) وانها تتناقص مع زيادة نسب التشويب، وظهر ان فجوة الطاقة البصرية تزداد بزيادة نسب التشويب حيث بلغت قيمة فجوة الطاقة البصرية للغشاء النقي (3.22 eV) وتصل الى (3.31 eV) عند التشويب بنسبة (8%). اظهرت القياسات الكهربائية ان الاغشية النقية والمشوبة من النوع السالب (n - type)، وتركيز حاملات الشحنة يزداد مع زيادة نسب التشويب المشترك. لاغشية المحضرة المرسبة على الزجاج والسليكون المسامي للنوعين (n, p) تم استخدامها في قياس التحسسية للغازين (NH3, NO2)، بدرجة حرارة الغرفة وبتراكيز (50, 100, 150, 200 ppm). اظهرت النتائج ان المقاومة الكهربائية للاغشية تتناقص مع زيادة التشويب بالنسبة للغاز (NH3) بسبب تفاعل الاختزال، لكنها تزداد مع زيادة التشويب بالنسبة للغاز (NO2) بسبب تفاعل الاكسدة. بينت النتائج ان تحسسية الاغشية المرسبة على السليكون المسامي تكون اكبر من تحسسية الاغشية المرسبة على الزجاج، وتكون تحسسية الاغشية المرسبة على السليكون المسامي نوع (n) اكبر منها في حالة السليكون المسامي لنوع (p). وبينت الدراسة ان زيادة تراكيز الغازات تؤدي الى زيادة التحسسية. | In this research, pure ZnO and (aluminum and boron) co - doped ZnO(AZB)thin films were deposited with various doping concentration(2, 4, 6 and 8 %),[ZnO : (B 1%+Al 1%), ZnO : (B 2%+ Al 2%), ZnO : (B 3%,Al 3%), ZnO : (B 4%,Al4%)]. The thin films have been prepared by Spray Pyrolysis's method at (450 ±10 oC) substrate temperature with (150±5 nm) thickness on glass and porous silicon (n & p) types with resistivity (ρ= 0.05 - 0.1 Ω.cm) and (111) crystalline orientation. Heterojunctions of the types, such as : (( ZnO, AZB)/p - PS/Si, (ZnO, AZB)/n - PS/Si were also prepared. The porous silicon layer was prepared by the electrochemical and photo electrochemical etching under the effect of halogen light on silicon substrates for (n & p) types with current density (30 mA) for (30 minutes). The surface topography of the films and the porous silicon are studied by using the Scanning Electron Microscopy (SEM), Transmission electron microscopy (TEM) and the Atomic Force Microscopy (AFM). The study shows that the surface structure of the deposited films is nano structural and the value of the grain size decreases with the increase of co - doping where the minimum value of grain size was (7.6 nm). It was found that the surface roughness increased with doping from (1.34 to 6.15 nm) and (6.4 to 12.12) for a films deposited on glass and porous silicon substrate respectively, the x - rays diffraction showed the prepared doped and undoped ZnO thin films were of polycrystalline structural of(hexagonal wurtzite). The optical properties of the prepared thin films have been studied by measured the transmittance and absorbance spectrum at room temperature for the wavelength range (300 - 1100 nm), the transmittance was (87 %) for the undoped ZnO, the transmittance decreased with the co - doped increased. The value of the optical energy gap increased with the co - doped increase, the optical energy gap of the undoped film was found to be (3.22 eV) and increased to (3.31 eV) after doping with (8%) rate. The electrical measurements proves that doped and undoped thin films were n - type, and the carrier charge concentrations increased with the increase of co - doped rate. The prepared thin films deposited on glass and porous silicon (n & p) types have been used to the sensitivity measurements for (NH3, NO2) gasses at room temperature for the (50, 100, 150, 200 ppm) concentrations. The results shows that the electrical resistance for the thin films decrease with the increase of co - doped concentrations for (NH3) gas due to the reducing interaction, but it increases with the increase of co - doped concentration for (NO2) gas due to the oxidation interaction. The results show that the sensitivity of the thin films deposited on porous silicon substrates is higher than the sensitivity of the thin films deposited on glass substrates. The sensitivity of n - type porous silicon is higher than p - type porous silicon and glass substrate. The study shows that the increase of gases concentrations leads to increase of sensitivity.

تحضير اوكسيد القصدير ذو التراكيب النانوية على اوكسيد الالمنيوم المانود بطرق مختلفه == Synthesis of SnO2 nanostructure on anodic aluminum oxide by different method

Author name: رحمه سعد محمد العبيدي
Supervisor name: رعد سعدون صبري
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: تم تحضير قالب اوكسيد الالمنيوم المانود بعملية الانودة بخطوتين للحصول على افضل ترتيب للمسامات باستخدام حامض الاوكزاليك بشروط تحضير مختلفة مثل درجة حرارة المحلول (10,7و 15 درجة سيليزية) وفولتيات الانودة (30 و40 فولت.(نتائج المجهر الالكتروني الماسح للقالب المحضرعند 30 فولت بينت ان المسامات ذات قطر صغير وترتيب ضعيف. بينما 40 فولت , المسامات ذات قطر اكبر وذات ترتيب عالي. من خلال هذه الدرجات الحرارية الثلاثة المختلفة (10,7و 15 درجة سيليزية). وجد ان (10 درجة سيليزية) هي افضل درجة حرارية لتحضير مسامات ذات ترتيب عالي. اذا درجة الحرارة ازدادت فان قطر المسام سوف يزداد . عامل الوقت مهم جدا في هذه العمليه عندما وقت الانودة يقل فان اوكسيد الالمنيوم المانود اصبح رقيق جدا وهش ويتكسر بسهوله جدا وبالتالي ستكون هناك صعوبة في استخدامه كقالب ترسيب. عندما الوقت يزداد لاكثر من 12 ساعة في الانوده الثانيه فسمك القالب يصبح حوالي 44 مايكرو متر سيعطي افضل شرط لترسيب اوكسيد القصدير. في هذا البحث اربع طرق استخدمت لتحضير اوكسيد القصدير بشكل قضبان نانوية باستخدام قالب اوكسيد الالمنيوم المانود مثل طريقة الصول - جيل ,تقنية التغطيس والفلترة ,التفريغ والتقطير وطريقة التبخير الحراري. جميع نتائج فحوصات الاشعة السينية لكل طرق التحضير تبين ان اوكسيد القصدير هو تركيب متعدد التبلور وذات تبلور متجانس. طرائق تحضير الصول - جيل والتبخير الحراري تبين ان القضبان النانوية لاوكسيد القصدير لها نفس القطر والطول وافضل ترتيب واكثر تجانس . بينما القضبان النانوية لطرائق التحضير الاخرى تختلف في القطر والطول. | Anodic aluminum oxide (AAO) was prepared by anodization process with 2 - step to obtain the best order arrangement of pores using oxalic acid at different preparation conditions such as electrolyte temperature (7, 10 and 15 °C) and anodization voltages (30 and 40 V). SEM results of the template which prepared at 30V showed the pores with small diameter and poor order. While at 40V, the pores with large diameter and high quality order pores. From three different temperatures (7, 10 and 15 °C), it's found that 10°C is the best temperature to prepare high quality order pores. If the temperature increases, the pore's diameter will increase. The time factor is very important in this process; when the anodization time decrease, AAO becomes very thin, brittle and can break very easily. Thus, there will be a difficulty to use as a deposition template. When the time increase more than 12 hr in second anodization, the template thickness's will become 44µm which gives the best condition to deposit SnO2. In this research, four methods used to prepare SnO2 nanorods by using AAO template such as the sol - gel, immerse and filtration technique, vacuum and drop setting and thermal evaporation. The whole results of XRD for all preparation methods showed that SnO2 is polycrystalline and homogeneous crystal. The sol - gel and thermal evaporation methods revealed the SnO2 nanorods have the same rod's diameter, length, best order and highly homogeneous. While the nanorods of other preparation methods are different in diameter and length.

تحضير ودراسة الخواص الكهربائية والبصرية لاغشية NiO الرقيقة غير المشوبة والمشوبة بالنحاس لتطبيقات متحسس الغاز == Preparation and study the electrical and optical properties of undoped and Cu doped NiO thin films for gas sensor applications

Author name: رانيا رعد كاظم الكناني
Supervisor name: انوار حسين علي الفؤادي
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: في العمل الحالي، تم تحضير اغشية رقيقة جيدة باستخدام تقنية منخفضة التكلفة وهي الرش الكيميائي الحراري, تم قياس الخصائص التركيبة , البصرية والكهربائية, والتحسسية لاغشية اوكسيدالنيكل غير المشوبة والمشوبة بالنحاس عند النسب ((1%,3%,5%,7%المرسبة على قواعد زجاجية مسخنة ب درجة حرارة c o (10 ± 400) وبسمكnm ( 10± 250 ) ، من حيود الاشعة السينية وجد ان جميع الاغشية النقية والمشوبة لها تركيب مكعبي , وبصورة عامة هناك زاويتي حيود عند المدى الزاويo 30 - 60)) تعود للسطحين (111)و(200) . وجد ان الحجم الحبيبي يزداد مع زيادة نسب التشويب حتى نسبة 3% ثم تنخفض قيمته عند النسب 5%, 7% ,ومن خلال قياسات ماسح القوة الذرية AFM وقياسات المجهرالالكتروني الماسح SEM تم التعرف على تاثير التشويب على جميع خواص الاغشية, كما تبين من نتائج التشويب ان زيادة التشويب تؤدي الى االزيادة في الحجم الحبيبي عند النسب (1%و3%) ثم ينخفض عند النسب (5% و7%). اشتملت الرسالة دراسة الخواص البصرية لاغشية اوكسيد النيكل غير المشوبة والمشوبة بالنحاس , وتبين ان فجوة الطاقة تقل من3.8 - 2.8) ev ) بزيادة نسبة التشويب. وجد ان الاغشية لها معامل امتصاص عالي cm(α>10 ) الذي يؤدي الى زيادة احتمال حدوث الانتقالات المباشرة بين المستويات البلورية وبينت النتائج ان معامل الامتصاص يزداد مع زيادة نسب التشويب. وقد اظهرت نتائج الخواص الكهربائية (D.C) زيادة التوصيلية الكهربائية مع زيادة التشويب لتصل اعلى قيمة لها عند نسبة 7%. وقد وجد ان لجميع الاغشية طاقات تنشيط تقل مع زيادة نسبة التشويب. من قياس تاثير هول وجد ان تحركية حاملات الشحنة تقل وتركيز الحاملات تزداد مع زيادة نسب التشويب . اما خصائص التحسسية لجميع الاغشية المحضرة تم قياسها للابخرة (NH ,H O )عند تراكيز مختلفة ppm(100,200,300) عند درجة حرارة ,150° c واظهرت النتائج ان افضل تحسسية كانت عند نسبة تشويب 5% لبخار NH , وقد وجد ان هناك زيادة خطية للتحساسية مع زيادة تركيز البخار. وهذا بسبب زيادة كمية البخار الذي يتفاعل مع سطح الغشاء الرقيق. | In the present work, a good adherent and smooth films of undoped and copper doped NiO have been prepared by using low cost spray pyrolysis technique at different percentage of copper concentration ,structural, optical, electrical, and sensing properties have been studied at different concentrations of Cu (1% ,3%,5%,7% ) deposited on glass substrate at temperature (400±10) oc with (250±10)nm thickness . From the X - ray diffraction investigation, the crystalline structure of thin films was a polycrystalline with a cubic structure , generally the peaks of the NiO and NiO : Cu thin films were observed at diffraction angles at the range (37°and 43°). All NiO : Cu thin films display peaks of (111), (200) and Cu peaks do not appear even after adding a higher quantity of Cu into the NiO films, the angle position of peak (111) shifted toward lower value with doping in Cu at 1%,3% then start to increases at 5%,7% concentration,resulting in the increasing of lattice constant (a),interplaner spacing (d) and crystallite size (D),then decreases due to the degradation in the crystallinity of NiO doped with 5%,7% respectively,surface analysis by SEM and AFM have been used to understand the effect of the doping on morphology properties of the samples. The doping resulted in increasing grain at doping rates (1%,3%), then decreases at doing rates (5%,7%). The measurements of optical properties of undoped and copper doped NiO films decreased with increasing the doping rate.Also the results have showed that absorption cofficient increases with doping to reach maximum value at 7% concentration .The energy gap of was calculated for undoped and copper doped NiO films,it is noticed that the energy gap decreases with the increases of doping until it reaches the minimum value at 7% doping concentration .The D.C measurements show that the resistivity decreased with increasing doping rate,also the hall measurements have been showed the carrier concentration increased with increasing doping rate. The AFM results reveal that the grain size increases with the increase in copper concentration at rates (1%,3%) and then decreased at rates (5%,7%).The sensing measurements showed that undoped and copper doped NiO thin films have high sensitivity to NH vapor as compared to H O vapor , and the best result was 26% at doping rate 5% at 300ppm vaopr concentration ,at operation temperature 150 o c for NH vapo

محاكات الهوائي الكسوري باستخدام منحني كوج ومينكوسكي == Simulation of Fractal Antenna Using Koch and Minkowiski Curves

Author name: خضير عباس قنبر
Supervisor name: كاظم جواد كاظم الشجيري
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: الهوائي عنصر رئيسي في الاتصالات اللاسلكية فهو الادات التي تستقبل وترسل الموجات الكهرومغناطيسية في الفضاء الحر. ان التوسع الهائل في الاتصالات اللاسلكية بحاجة الى هوائيات متعددة الحزم وصغيرة الحجم وبمقطع جانبي منخفض ومن اجل تطوير اداء الهوائيات استخدمت الهندسة الكسورية لتحسين خواصها . والتي تجعل الهوائي متعدد الوظائف . في هذة الرسالة استخدمت تقنية جديدة لتحسين اداء الهوائيات الكسورية ثنائية القطب باستخدام عاكس كسوري متحرك. استخدمت الحقيبة البرمجية 4NEC2 لمحاكاة اول ثلاث تكرارت لهوائيات منحني Koch ومنحني Minkowski قبل وبعد اضافة العاكس الكسوري . ومن اجل تصميم الهوئيات بدقة عالية استخدم البرنامج Adobe illustrator CS4 لرسم جميع الهوائيات المقترحة . ومن نتائج المحاكاة لوحظ ولجميع الهوائيات ان العاكس الكسوري المتحرك حسن من قيمة VSWR (نسبة فولتية الموجة الواقفة) والكسب والتوجية وكذلك زاد الترددات الرنينية المفيدة للتكرارات الثلاثة لمنحني Koch . حيث اضاف تردد رنيني مفيد للتكرار الاول وترددين رنينيين مفيدين للتكرار الثاني وتردد رنيني للتكرار الثالث كذلك اضاف ترددين رنينيين مفيدين للتكرار الثالث لمنحني Minkowski . | Antenna is the main element in wireless communication. It is the instrument which receives and transmits the electromagnetic wave in a free space. The great expand in wireless communications need antennas with multiband, small size and low profile. In order to develop the performance of antennas, fractal geometry is used to optimize the property of the antenna. It makes antenna multi - functional. In this thesis a novel technique is used to optimize the performance of fractal dipole antennas by using a movable fractal reflector. 4NEC2 software package is used to simulate the first three iterations for (Koch curve and Minkowiski curve) antennas before and after adding the fractal reflector. In order to design fractal antennas with high accuracy, Adobe illustrator CS4 software program is used to draw all proposed antennas. From simulation results and for all proposed antennas are observed the movable fractal reflector optimize the value of voltage standing wave ratio VSWR, gain and directivity. Also, it increases the benefit resonant operating frequencies for all three iterations of the Koch curve. It adds one benefit resonant frequency to the first iteration and two benefit resonant frequencies to the second iteration and one benefit resonant frequency to the third iteration. Also, it adds two benefit resonant frequencies to the third iteration of Minkowiski curve

غشاء ZnO - SnO2 وخصائصه التحسسية == ZnO - SnO2) Thin Film and Their Sensing properties

Author name: خالد وليد صابر
Supervisor name: علي جاسم محمد الجابري
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: ZnO,SnO2,Zno - Sno2 composite( ل في هذا البحث تم دراسة الخصائص التركيبية والتحسسية على توالي والمحضرة على قواعد قواعد زجاجية بظروف ترسيب مختلفة من نسب المواد (100% : 0%,0% : 100%, 50% : 50%, 30% : 70% , 10% : 90% ) وبدرجة حرارة القاعدة ( 400 & 450 ) سيليزية وبزاوية رش ( 0& 45 ) درجة. بينت فحوصات تقنية حيود الاشعة السينية (XRD) لتشخيص طبيعة تبلور الاغشية المحضرة, ان جميع الاغشية المحضرة ذات تركيب متعدد التبلور من نوع سداسي hexagonal)).مع اتجاهيه (002 ) للعينات المحضرة ل) ( ZnO,ZnO : SnO2 compositeما عدا (SnO2 ) فهو ذو تركيب متعدد التبلور من النوع الرباعي ( tetragonal ) مع اتجاهية ( 110 ) ، كما اظهرت النتائج الحصول على التركيب نانوي بمعدل حجم حبيبي ( من 2.4 الى 46 نانو) وتجانس منتظم بواسطة اضافة اوكسيد القصدير الى اوكسيد الزنك ، وهذا اعطى تبلور عالي مع ظروف الترسيب المختلفة. بواسطة تحليل السطح بواسطة المجهر الالكتروني الماسح ( SEM ) ومجهر القوة الذرية ( AFM ) تم التعرف على تاثير ظروف الترسيب المختلفة على خصائص تشكل العينات ، اظهرت صور (SEM ) تراكيب مختلفة مثل الابر والالياف والقضبان السداسية النانوية و(rich particle ) كما اظهرت النتائج التجانس والتوزيع المنتظم والنمو العالي ، كذلك زيادة معدل الحجم الحبيبي وزيادة الخشونة وهذا يقود الى الحصول على مساحة سطحية عالية وتاثير كبير على التحسسية .كل القياسات التحسسية اظهرت تحسسية عالية عند درجة حرارة القاعدة ( 450 ) سيليزية بزاوية رش (45 ) درجة ونسبة (SnO2 50% : % 50 ZnO) وعند زيادة نسبة ( ZnO ) لتصبح (100 % ) فان التحسسية تقل. ان العامل المؤثر على التحسسية هو نسبة المواد الداخلة في تركيب الاغشية الرقيقة كافضل نسبة حجمية 50)٪ 50 : ٪( وعند زيادة نسبة لتصبح 100٪ اوكسيد الزنك فان التحسسية تقل . اوكسيد الزنك لديه تحسسية عالية، ولكن عندما يخلط مع SnO2، وهذا يؤدي الى زيادة تحسسية وهذا واضح من خلال النتائج المستحصلة. | In this work, structural and sensing properties have been studied for ZnO, SnO2 compound and ZnO - SnO2 composite thin films. They were prepared by spray pyrolysis technique deposition at substrate glass, were used different deposition conditions, volume ratios(100% : 0%, 0% : 100%,50% : 50%, 70% : 30%, 90% : 10%,), Substrate temperature ( 400)&(450) oC , incident angle spray of spray pyrolysis (0) & (45) .. The X - ray diffraction technique has showed that all prepared films are polycrystalline structure with hexagonal type that preferred orientation of plan (002) direction for all thin film prepared for ( ZnO compound, ZnO - SnO2 composite thin films) except SnO2 thin films are polycrystalline structure with tetragonal type with preferred orientation of plan (110) , the results obtained by X - ray diffraction showed that we get the installation of nano structure with average grain size between ( 2.4 to 46 nm) and uniform Homogeneity by added tin oxide to zinc oxide, the results show high crystalline with deferent conditions deposition. Surface analysis by SEM and AFM have been used to understand the effect of the different conditions deposition on morphology properties of the samples. The SEM micrographs show needle - like, fiber - like , hexagonal nano rods, rich particles ( high growth) and homogeneity , uniform distribution, high growth. The results showed an increase of the average grain size with increasing roughness and this leads to obtain a high surface area and large effect on sensitivity. Overall measurements sensing showed that the highest of sensitivity at substrate temperature (450 oC) ,incident angle spray pyrolysis (45) with ratio ( 50% : 50%) . The influencing factor on sensitivity is the ratio of materials involved in the structure of thin - film as the best volume ratio its (50% : 50%) and when you increase the ratio to become 100%ZnO the sensitivity decreases. ZnO has high sensitivity, but when mixed with SnO2, this leads to increase sensitivity and this is clear from the results that were obtained.
1 ... 114 115 116 117 118 ... 179