عرض: 25 50 75 100 النتائج

نتائج البحث: 25 من أصل 5,034

مقارنة وراثية وبكتريولوجية بين Staphylococcus spp. وStreptococcus spp. المقاومة لمضادات الــ Macrolide والمعزولة من اصابات سريرية مختلفة == Genetic and Bacteriological Comparative between Staphylococcus spp. and Streptococcus spp. resistance to Macrolide , isolated from different clinical infections

اسم المؤلف: سيف علي محمد الحيالي
اسم المشرف: هادي رحمن رشيد الطائي
الموضوع العام: علوم الحياة
السنة: 2014
الموضوع الدقيق: الاحياء المجهرية
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: ديالى
الصفحات الاولى:
المستخلص: جمعت 200 عينة من مصادرمتنوعة شملت ( الادرار، والدم ، ومسحات الاذن الوسطى ، والقشع ، والجروح ، والبلعوم ، ومسحات مهبلية ) من مستشفيات ( بعقوبة العام ، البتول للولادة ، وبلدروز العام ) بالاضافة الى بعض المراكز الصحية وذلك للفتره من 1/ 9 / 2013 لغاية 1 /1 /2014 ، حيث اظهرت 75 عينة وبنسبة (37.5%) نموا سالبا للزرع البكتيري و125 عينة (62.5%) نموا موجبا للزرع البكتيري . تم الحصول على 40 عزلة تعود للجنسين Staphylococcus spp. وStreptococcus spp . اذ شخصت العزلات باستخدام الاختبارات الزرعية , والمجهرية , والكيموحياتية فضلا عن الفحص التاكيدي للعزلات باستخدام نظام api 20 staph and strep . وصلت نسبة Staphylococcus المعزولة من الدم الى 33.3% ومن الادرار 12.6% ومن البلعوم 36% ، ومن الاذن الوسطى 13.8% ، ومن الجروح 18.7% ، اما نسبة Streptococcus المعزولة من البلعوم فكانت نسبتها 30.7% ، ومن القشع 11.7% ، ومن الجروح 6.2% . تم اختبار حساسية جميع العزلات لبعض مضادات الـــ Macrolide الشائعة الاستخدام بالاضافة الى مضاد الكلندامايسين العائد لعائلة الــ Lincosamides ، اظهرت النتائج ان مقاومة S. aureus للارثرومايسين وصلت الى نسبة 50% ، وللازيثرومايسين بنسبة 45% ، وللكلندمايسين بنسبة 25% . اما S. epidermidis فقد كانت النسب كالتالي 66.6% للارثرومايسين و44.4% للازيثرومايسين ، و11.11% للكلندامايسين . اما بالنسبة للجنس S.pyogenes فكانت نسب المقاومة كالتالي 25.5% للارثرومايسين ، و25.5% للازيثرومايسين ، و14.5% للكلندامايسين . تم تحديد التركيز المثبط الادنى لمضاد الارثرومايسين للعزلات قيد الدراسة والتي اظهرت مقاومة تجاه هذا المضاد في فحص الحساسية بطريقة الاقراص (المقاومة) حيث تراوحت قيم MIC للعزلات بين (<64 - 32) مايكروغرام / مل . تم التحري عن قابلية عزلات Staphylococcus spp . و. Streptococcus spp على انتاج بعض عوامل الضراوة وقد اظهرت النتائج ان تلك العزلات كانت منتجة لعدة انواع من الانزيمات والذيفانات التي تسهم عادة في امراضيتها ومن هذه الانزيمات انزيم البروتييز، واللايبيز ، واليوريز، والانزيم المحلل للدنا ، والستافيلوكاينيز ، والستربتوكاينيز وكذلك اظهرت هذه العزلات قدرتها على انتاج اربعة انواع من الهيمولايسين (الفا ، بيتا ، كاما ، ودلتا). كما وتم التحري عن قابلية العزلات على انتاج الطبقة اللزجة Slime layer باستخدام طريقة اكار احمر الكونغـو وقد بينت النتائج ان كلا الجنسين لها القدرة على انتاج الطبقة اللزجة فقد اظهرت النتائج ان (65% ) من عزلات بكتريا S. aureus منتجة للطبقة اللزجة بينما كانت جميع عزلات S.epidermidis وبنسبة %100 منتجة للطبقة اللزجة ، بينما اظهرت 75% من عزلات S.pyogens قدرتها على انتاج الطبقة اللزجة . اجريت عملية استخلاص للدنا الكلي البكتيري لـ ( 12 ) عزلة ثم اجري تفاعل البلمرة المتسلسل PCR لعزلات Staphylococcus spp. وStreptococcuss spp. المقاومة للـ Mcrolide وذات MIC اكثر من64 مايكروغرام/ مل والموجبة النمو على الوسط المعلم بالارثرومايسين من خلال استعمال البوادىء المتخصصة التي تستهدف التسلسل النوعي للجين erm A وmef A ، رحلت نواتج التضاعف على هلام الاكاروز بتركيز 1% ولوحظ ظهور حزمة واحدة في جميع المسارات في الهلام بالمستوى نفسه بالنسبة للجينين . اظهرت النتائج ان نسبة وجود الجين erm A في عزلات S. aureus وصل الى 80% وفي عزلات S.epidermidis 30% ، وفي عزلات S.pyogens وصلت النسبة الى 50% ، اما بالنسبة للجين mef A فكانت نسبة توافره في عزلات S. aureus 20% ، وفي عزلات S.epidermidis 40% ، وفي عزلات S.pyogens 50% . | Collected 200 samples from different clinical sources included (Urine , blood , middle ear , sputum, throat , wounds , and vaginal swabs) from hospitals (Baquba teaching hospital , AL - Batool hospital and Balad Ruz teaching hospital) in addition to some health centers for the period from 1 / 9 / 2013 until 01 / 01 / 2014. As demonstrated 75 samples 37.5% were negative growth for bacterial culture and 125 62.5% positive growth of bacterial culture . 40 isolates belonging were obtained to both genus Staphylococcus spp. and Streptococcus spp. These isolated were diagnosed by using cultural tests , microscopic, and biochemical characteristics as well as a confirmatory test for the isolates using the api 20 staph & strep system . The percentage of Staphylococcus isolated from the blood is 33.3% the urine 12.6% the throat 36% , middle ear 13.8% , and the wounds 18.7%, while the percentage of Streptococcus isolated from the throat was represented 30.7% , the sputum 11.7% , and the wonds 6.2%. Antibiotic susceptibility testing was performed on all isolates against some of the commonly used Macrolide members in addition to the clindamycin return to the lincosamides family using the disk diffusion method , the results showed that the resistance of S. aureus to erythromycin reached to 50% , for azithromycin 45% , and for clindamycin is 25% . The S. epidermidis ratios were as follows 66.6% for erythromycin 44.4% for azithromycin , and 11.11% of the clindamycin ، while the resistant of S.pyogens were as follows 12.5% of erythromycin , 12.5% of the azithromycin , and 14.5% of the clindamycin . The minimum inhibitory concentration MIC for erythomycin of isolates under study which showed resistance to the antibiotic sensitivity test in a Disk diffusion method where ranged between <33 - 64 µg / mL . investigated the ability of Staphylococcus spp. and Streptococcus spp on the production of some of the virulence factors . The results showed that these isolates were productive for several types of enzymes and toxins that contribute usually in pathogenicity. One of these enzymes , protease enzyme , lipase enzyme , urease enzyme , Dnase enzyme , Staphylokinase enzyme , and Streptokinase enzyme and also showed these isolates ability to produce Four types of Heamolysin (alpha , beta , gamma , and Delta) . It also has been investigating the susceptibility of isolates to produce a Slime layer using the Congo red agar ( CRA) ، The results showed that both genus have the ability to produce slime layer and Biofilm formation , the results showed that 65% of the S. aureus producing Slime layer while all S.epidermidis isolates produced the slime layer , while showed 75% of the isolates S.pyogens ability to produce Slime layer. Conducted the process of total DNA extraction to 12 isolates under study that resist Macrolide members . polymerase chain reaction (PCR) was done for isolates of the bacterium Staphylococcus and S.pyogens resistance of Mcrolide and with MIC more than 64 micrograms / ml by using specialized primers targeting sequence specific gene erm A and mef A , deported outputs doubling the agarose gel concentration 1% and observed the emergence of a single package in all the tracks in the gel at the same level for the genes . The results showed that the percent of the presence of erm A gene in isolates of S. aureus arrived 80% and in isolates S.epidermidis 30% , and in isolates S.pyogens got to 50% , while for mef A gene the presence in isolates of S. aureus was 20% , in isolates S.epidermidis 40% , and in isolates S.pyogens 50% .

تقدير البعد الوراثي لبعض اصناف نخيل التمر Phoenix dactylifera L. المزروعة في العراق باستعمال تقانة RAPD == Estimation of the Genetic Distance for Some Date Palm Varieties ( Phoenix dactylifera L.) Grown in Iraq using a RAPD Technique

اسم المؤلف: مهند رشيد حسين الزيدي
اسم المشرف: شذى عايد يوسف
الموضوع العام: علوم الحياة
السنة: 2014
الموضوع الدقيق: النبات
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: ديالى
الصفحات الاولى:
المستخلص: This study was conducted at Molecular Biology lab, Genetic Engineering Department, Agricultural Research Directorate, Ministry of Science & Technology to estimate fingerprint and genetic relationship among 9 Iraqi varieties of date palm Phoenix dactylifera L. namely Asabee AL - aroose, Zahdi, Sukari, Saada, Ashrasy, Barben, Shetwi, Khistawi and Nhair Al Saly. 20 primers were used to PCR amplify characteristic Random Amplified Polymorphic DNA (RAPD) marker fragments. Total genomic DNA was isolated from varieties fresh leaves, the average yields of DNA were in the range of 100 - 522.5 ng/ul with purity ranged between 1.66 to 1.92. Polymerase Chain Reaction (PCR) experiments were performed to detect DNA polymorphisms amplified fragments in each cultivar (their numbers and molecular weight sizes) on agarose gel electrophoresis stained by ethidium bromide. Results of RAPD experiments revealed differences in band numbers and molecular weight sizes, all tested primers yielded 157 polymorphic bands and the lowest polymorphic band numbers (5 bands) were with primers OPA - 01 and OPA - 20 while the largest number of polymorphic (12 bands) were with primers OPA - 08 and OPH - 09. RAPD analysis showed that many primers gave unique band in all samples made possible fingerprint identification of each cultivar, Ashrasy variety gave highest 6 unique polymorphic bands with primers OPA - 08, OPC - 04, OPF - 05 and OPF - 12, while Zahdy variety gave 1 unique polymorphic band (385 pb) with primer OPB - 05. Data was analyzed by using statistical program SPSS to find similarity and genetic relationship among cultivars, similarity index ranged between 0.291 and 0.511 and the biggest percentage of similarity was between Saada and Shetwi. Dendogram analysis has separated varieties into two main groups, the first main group consists of three sub - cluster or sub - group, the first sub - cluster contained Saada and Shetwi varieties while the second sub - cluster included Zahdi, Ashrasy and Nhair Al Saly and the third sub - cluster consisted Asabee Aroose cultivar. The second main group was divided into two sub - group, the first sub - group consisted of Berben and Khistawi while the second sub - group included Sukary.

تاثير الرش بالبرولين والارجنين في نمو وحاصل الباذنجان في الزراعة المحمية == Effect of Spraying Proline and Arginine in the Growth and Yield of Egg Plant in Protected culture

اسم المؤلف: زينب نبيل ابراهيم
اسم المشرف: نجم عبد الله جمعة الزبيدي
الموضوع العام: علوم الحياة
السنة: 2014
الموضوع الدقيق: النبات
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: ديالى
الصفحات الاولى:

تاثير مواعيد الزراعة والاصناف في نمو وحاصل زهرة الشمس (Helianthus annuus L.) == The effect of difference genotype and planting date in growth and production of (Helianthus annuus L .

اسم المؤلف: هديل احمد مهدي الساعدي
اسم المشرف: نجم عبد الله جمعة الزبيدي
الموضوع العام: علوم الحياة
السنة: 2014
الموضوع الدقيق: النبات
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: ديالى
الصفحات الاولى:
المستخلص: نفذت التجربة في مشتل مديرية زراعة ديالى - بلدروز في الموسم الربيعي لعام ( 2014 ) لدراسة تاثير اربعة مواعيد زراعة 1/2 و15/2 و1/3 و15/3 على صفات النمو والحاصل ومكوناته والصفات النوعية لثلاثة اصناف من نبات زهرة الشمس الصنف فلامي , يوروفلور , زهرة العراق . تم استعمال القطع المنشقة Split Plot بتصميم القطاعات العشوائية الكاملة R.C.B.D بثلاثة مكررات حيث تضمنت مواعيد الزراعة المعاملات الرئيسية الاصناف المعاملات الثانوية ويمكن تلخيص النتائج كالاتي : - 1 - اظهرت مواعيد الزراعة تاثيرات معنوية في صفات النمو والحاصل والنوعية . اذ تفوق الموعدين الثاني والثالث في جميع صفات النمو كما تفوق الموعد الثاني في جميع مكونات الحاصل ونسبة الزيت وحاصله.2 - اظهرت الاصناف اختلافات معنوية فيما بينها في بعض صفات النمو ومكونات الحاصل والنوعية . اذ تفوق الصنف زهرة العراق فــــي المساحة الورقية وعدد الاوراق / نبات . وتفوق الصنفين زهرة العراق يوروفلور في النسبة المئوية للاخصاب ، وتفوق الصنفين يوروفلور وفلامي في قطر الساق تفوق الصنفين زهرة العراق ويوروفلور في نسبة الاخصاب المئوية وتفوق الصنفين يوروفلور وفلامي في وزن 1000 بذرة وحاصل النبات ونسبة وحاصل الزيت .3 - كان تاثير تداخل مواعيد الزراعة والاصناف معنويا في بعض صفات النمو والحاصل والنوعية ، حيث اعطى الصنف زهرة العراق في الموعد الثاني اعلى متوسط في ارتفاع النبات . واعطى اعلى متوسط في ارتفاع النبات والمساحة الورقية ودليل الكلوروفيل . واعطى الصنف يوروفلور اعلى متوسط في الوزن الرطب والجاف في القرص الزهري وقطر الساق وقطر القرص والنسبة المئوية للاخصاب وعدد البذور ووزن 1000 بذرة وحاصل النبات وحاصل البذور والنسبة المئوية للزيت وحاصل الزيت | This experiment was conducted in Baladrus plant nursery in spring (2014) to stady effect of four sowing dates ( 1/2 , 15/2 , 1/3 and 15/3 ) on plant yield and its component and the second factor was sunflower varieties ( Flamy , Eourflor , sun flower ) in a split plot desing in R.C.B.D with three repilication the sawing date have the main plots varieties in the sub - plots and the result summarized in : 1 - the sowing date show a signifieaht effects in some of growth yied and quality characters . the second and third date exceeded the others in plant height leaves number in plant but the second dates exceeded others in fertilization percentage and leaves seed number in disc .2 - varieties show significant differences in growth yield and its components and quality sun flower exceeded others in leave area . but Eourflor and Flamy gave increase in stem diameter . sunflower and Eourflor gave in higer fertilization percentage Eourflor and sunflower exceeded others in 1000 seed weight plant yield and Oil yield .3 - Interaction between sowing dates with varieties gave signnificantly result in growth yield and yield quality sunflower gave high means in the second and third dates in plant height and leave area and chrorophyll index in the second date Flamy gave the highest means in leave area in the third date Eourflor gave the highest means in stem diameret wet and dry weight for the flower disc in the second date Eouroflor and Flamy exceeded others in all of yield components yield and Oil percentage in the second date .

تحسين خصائص سطح سبيكة الالمنيوم باستخدام الاكساء بالليزر بانابيب كاربون نانوية مزدوجة الجدار ونابيب كاربون نانوية متعددة الجدار == Enhancement of Al 6061 - T6 Alloy Surface Properties using Laser Cladding with DWCNTs and MWCNTs

اسم المؤلف: حسنين مجيد حسين
الموضوع العام: علوم الليزر
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Industrial applications of nanomaterial in particular carbon nanotubes (CNTs) have increased from various viewpoints, such as, high performance, energy saving, cost saving, and environmental concerns. Laser cladding technique has been used successfully to modify the surface properties of materials, i.e., improving their wear and corrosion resistance. This work involves cladding aluminum alloy (Al 6061 T6) with different types of carbon nanotubes (multi - walled carbon nanotubes (MWCNTs) and double walledcarbon nanotubes (DWCNTs)) by an automated pulsed Nd : YAG laser. This was achieved by controlling selected cladding parameters whic h are laser power, pulse duration, and working frequency. The experimental investigation included microhardness, energy dispersive X - ray, corrosion resistance and microstructure topography by scanning electron microscope. At the beginning, fifteen cladded samples divided into three groups were investigated to choose the best laserparameters for the process to have almost the best homogeneous clad layer. Group one; five levels of peak power (2.7, 2.9, 3.1, 3.3, and 3.5) kW respectively where varied versus fixed pulse duration of 16 ms, working frequency of 1.5 Hz, and scanning speed of 0.5mm/s. Group two; five levels of pulse duration (12, 14, 16, 18 and 20) ms respectively where varied versus fixed peak power of 3.1 kW, working frequency of 1.5Hz, and scanning speed of 0.5mm/s. Group three; five levels of working frequency of (1.1, 1.3, 1.5, 1.7, and 1.9) Hz respectively where varied versus fixed peak power of 3.1 kW, pulse duration of 16 ms and scanning speed of 0.5 mm/s. The investigation shows that the optimum estimated laser parameters for achieving the best results at spot diameter of 3 mm were (peak power of 3.1 kW, pulse duration of 16 ms (3 ms as preheating and 13 ms as the main action time of the pulse) and working frequency of 1.5 Hz.The executed process in this work was computationally modeled using commercial multiphysics finite element analysis (FEA) software package ANSYS® Release 11 to simulating the virtual environment of laser cladding process to determine the temperature distribution in three - dimensional (3D) analysis. Results indicated that laser cladding of Al 6061 T6 using DWCNTs enhanced three of the most important of surface properties which are hardness, abrasive wear resistance and corrosion resistance more than did the MWCNTs. The distribution of the MWCNTs on the surface of Al 6061 T6 is better than that for the DWCNTs but its penetration is less. Theoretical results show that the diffusion played an important role in the cladding process.

تصنيع مواد متوافقة احيائيا للعظام التعويضية باستخدام الليزر ووسائل تقليدية == Fabrication of Biocompatible Material for Bone Implants Using Laser and Conventional Means

اسم المؤلف: هدیل فیاض عباس
اسم المشرف: رائد عبد الوھاب اسماعیل | ولید خلف حمودي
الموضوع العام: علوم الليزر
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The present work describes coating the titanium implants with biocompatible materials (ceramics or composites). Three techniques were implemented to materialize this work; these are : pulsed laser deposition, spray pyrolysis, and electrochemical deposition. In these techniques, the influence of deposition temperature, solution concentration, polymer and H2O2 addition, buffer layer sandwiching, and electrolytes combinations were tested. The obtained films’ properties were investigated by using Fourier Transform Infrared Spectroscopy (FTIR), Atomic Force Microscope (AFM), Optical Microscope, X - ray Diffraction (XRD), Scanning Electron Microscope (SEM), Vickers’ hardness instrument, and Simulated Body Fluid (SBF).Composite films prepared by pulsed laser deposition showed the formation of polycrystalline hydroxyapatite of low crystallinity due to the addition of polymeric shrimp crusts. These films had (80 - 90 nm) spherical grains and constitute only (20 - 25%) of the favorable range (80 - 200 nm), and good hardness (≈550 HV). Pure hydroxyapatite (ceramic) films had (11 - 15 nm) surface roughness and an average grain size of (48 - 65 nm) which represents (7 - 31%) of the favorable range. All these films were porous, have good adhesion, and uniform surface morphology. Best results of pulsed laser deposition technique were obtained at 125oC deposition temperature. Films prepared by spray pyrolysis showed porous polycrystalline A and B - type carbonated hydroxyapatite and single crystalline α - Ca3(PO4)2; of relatively low crystallinity and hardness increased with deposition temperature. Post annealing at 400oC and 800oC for film prepared at 350°C of (0.0325 M) solution concentration has raised the hardness from 222 HV to 488 HV and 1204.25 HV respectively. The films of (0.0325 M) solution concentration had (101 - 105 nm) average grain size and were (78 - 100%) of the favorable range, whereas the films of (0.0406 M) solution concentration had (92 - 96 nm) and made (74 - 100%) of the favorable range. Good bioactivity and adhesion strength were obtained from these films which were enhanced significantly after post annealing. Optimum results were obtained from films prepared at 350oC of (0.0325 M) solution concentration after post annealing. Films prepared by electrochemical deposition technique showed uniform and highly porous polycrystalline B - type carbonated hydroxyapatite and polycrystalline α - Ca3(PO4)2. These films had an average grain size of (66 - 93 nm) when prepared from ((NH4)2HPO4 and Ca(NO3)2) whereas the grain size was (87 - 118 nm) when prepared from (Na3PO4 and Ca(NO3)2) with low roughness values. They had (45 - 68%) and (64 - 87%) respectively of the useful grain size in the favorable range (80 - 200 nm). The films covering area increased after H2O2 addition. These films had poor adhesion but this slightly improved together with the roughness after a buffer layer was deposited.The composite films had low crystallinity, grain size, hardness, and poor adhesion. Films prepared at 70oC from both electrolytes combinations ((NH4)2HPO4 with Ca(NO3)2, and Na3PO4 with Ca(NO3)2) had the best surface morphology and crystallinity with an optimum hardness (≈475HV). All these films had very fast dissolution rate in Simulated Body Fluid. Spray pyrolysis deposition technique proved to be the most promising technique for biocompatible materials fabrication for bone implants requirement

فعالية المضاد البكتيري لاكاسيد المعادن النانوية المحضرة بواسطة الاستئصال بالليزر في سائل == Antibacterial Activity of Metals Oxide Nanoparticles Induced by Laser Ablation in Liquid

اسم المؤلف: فرح عبد الكريم عبد الامير
اسم المشرف: خولة صلاح خشان | غسان محمد سلمان
الموضوع العام: علوم الليزر
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: With the increasing of bacterial resistance against antibiotics, nanoparticles studies was appeared together with growing need for substituting theseantimicrobial agents. Recently, it has been demonstrated that metal oxides nanoparticles exhibits bactericidal effect against both bacteria strains.In this research, three kinds of metal oxide nanoparticles (Nickel oxide, Copper oxide and Titanium dioxide) colloidal solutions synthesized using laser ablation of nickel, copper and titanium pellet immersed in de - ionized water. Pulsed Nd : YAG laser with 1٠٦٤ nm wavelength and different laser energies (40, 80, 120, 160 and 200 mJ) was used to irradiate the targets for various ablation times : 5 (75 pulse), 10 (150 pulse), 15 (225 pulse) and 20 min (300 pulse).The UV - Visible absorption spectrum of NiO nanoparticles exhibited broad bands whose intensity decreased continuously above ~210 nm. The UV - Visible absorption spectrum of the CuO nanoparticles solution showed absorption peak around ~275 nm and another peak with low intensity around ~645 nm. While absorption spectrum of TiO2 nanoparticles exhibited strong absorption domination on the spectrum below ~360 nm. In all three metal oxide nanoparticles, absorption intensity increased with the laser energy and ablation time due to increase nanoparticles concentrations in liquid. Fourier Transform Infrared spectroscopy characterization confirmed the formation of metal oxide nanoparticles. All three metal oxides nanoparticles gave absorption bands below ~600 cm−1 arising from inter - atomic vibrations. X - ray Diffraction pattern of nanoparticles proved the presence of (111), (200) planes which belong to NiO and ( - 111), (112) planes that assigned to CuO and (101), (112), ( - 403) planes that related to TiO2. TransmissionElectron Microscopy measurement showed NiO, CuO and TiO2 nanoparticles with nearly spherical shapes and sizes at 2 - 21 nm, 3 - 40 nm and 6 - 30 nm respectively.The antibacterial activity of nanoparticles carried out against four types of bacteria : Escherichia coli, Pseudomonas aeruginosa, and Proteus vulgaris (gramnegative bacteria), Staphylococcus aureus (gram - positive bacteria) firstly by liquid medium method. 1000 μg ml - 1 concentration was the best - used concentration of nanoparticles for inhibiting growth of both bacteria strains. Among the three tested types of nanoparticles (NiO, CuO and TiO2) at highest concentration (1000 μg ml - 1), TiO2 NPs showed the highest antibacterial activity against Escherichia coli and Pseudomonas aeruginosa. NiO NPs showed the highest antibacterial activity against Staphylococcus aureus while CuO NPs showed the highest antibacterial activity against Proteus vulgaris. Results also indicated that metal oxide nanoparticles and amoxicillin would have a synergistic effect on inhibiting of bacterial growth. Amoxicillin showed inhibitory rate about 74.8% against Escherichia coli and 76.28% against Staphylococcus aureus. In the case of NiO, CuO and TiO2 nanoparticles at concentration 1000 μg ml - 1 with Amoxicillin, antibacterial activity of Amoxicillin enhanced to about 81.5%, 90% and 81.9% against Escherichia coli and to about 86.9%, 91% and 90.7% against Staphylococcus aureus. Therefore, CuO nanoparticles and amoxicillin have the best synergic effect on inhibiting both bacteria strains. The antibacterial activity of the three metal oxides nanoparticle combined with Amoxicillin was also tested by well diffusion method against Escherichia coli and Staphylococcus aureus. In this method, CuO NPs at concentration 1000 μg ml - 1 along with Amoxicillin showed the highest inhibition zone against Escherichia coli (26.0±1.00 mm), while showed complete inhibition of bacteria against Staphylococcus aureus.

الجدوله لمقاييس متعددة الاداء == Scheduling with Multiple Performance Measures

اسم المؤلف: علي عباس نعمان المالكي
اسم المشرف: طارق صالح عبد الرزاق
الموضوع العام: علوم الرياضيات
السنة: 2014
الموضوع الدقيق: الرياضيات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الرسالة تصغير دالة لمعياريين او ثلاثة والحاصلة من جدولة n من الاعمال على ماكنة واحدة . تم التركيزفي هذه الدراسة والاخذ بنظر الاعتبار على حالة التاخير اللاسالب والعمل المتاخر ووقت الاتمام الكلي . ونوقشت المسائل التالية : 1 . تصغير الدالة (Tmax+Vmax) . 2 .تصغيرالدالة ذات ثلاث معايير والتي تاخذ الصيغة Lex(Tmax+Vmax ,Σ■(n@i)Ci) وLex(Σ■(n@i)Ci , Tmax+Vmax ) . . (■(n@i)Ti + ■(n@i)Vi) تصغير الدالة .3 للمسالة الاولى اقترحنا خوارزمية التفرع والتقييد لايجاد الحل الامثل كذلك برهنا بعض الحالات الخاصة التي تؤدي الى الحل الامثل .كذلك اقترحنا خوارزمية (A) المطورة من خوارزمية لولر لحل المسالة وهذا قادنا الى ملاحظة مشجعه وهي ان اغلب النتائج الحسابية تؤدي الى الحل الامثل. كما واجرينا تجارب حسابية لطريقة التفرع والتقييد على مجموعة كبيرة لمسائل اختبارية. .للمسالة الثانية والتي هي تعميم للمسالة الاولى قمنا باستخدمنا قاعدة (SPT) وكذلك الخوارزمية (A) المطورة لايجاد افضل الحلول . للمسالة الثالثة اقترحنا خوارزمية التفرع والتقييد مع قيدين سفلي وقيد علوي الذي هو اصغر ثلاث قيود تقريبيه مقترحة لايجاد الحل كذلك برهنا بعض الحالات الخاصة واستخدمنا قواعد الهيمنة مع خوارزمية التفرع والتقييد لتحسين النتائج الحسابية لهذه المسالة. | This thesis intends, to minimize a function of two and three cost criteria for scheduling n jobs on a single machine. The study focuses on the case where Tardiness, late work and total Completion times are considered. The following problems are discussed 1. Minimizing a function of two criteria (Tmax+Vmax). 2.Minimizing a function of three criteria of the forms Lex(Tmax+Vmax,Σ■(n@i=1)Ci) and Lex(Σ■(n@i=1)Ci , Tmax+Vmax ). 3. Minimizing a function of two criteria (■(n@i=1)Ti + ■(n@i=1)Vi). For the first problem 1// Tmax+Vmax , a branch and bound algorithm are proposed to find optimal solution . Also, we proved some special cases for this problem which lead to optimal solution. An improved algorithm (A) for Lawler algorithm has been constructed for solving this problem, which leads to an interesting observation that the algorithm (A) will yield optimal solutions in all instances of the test problems. Also computational experience for the (BAB) algorithm is presented. For the second problem which is a generalization of the first problem we use either the SPT rule or modified algorithm (A) to find the best solutions. For the third problem we proposed a (BAB) algorithm with two lower bounds and upper bound which is the minimum of three heuristic methods .We proved some special cases which lead to the optimal solution . We used dominance rules with BAB algorithm to enhance the computational results for this problem

درجة افضل تقريب للدوال غير المقيدة في الفضاءات المحلية العامة الموزونة == The Degree of Best Approximation of Unbounded Functions in Locally - Global Weighted Spaces

اسم المؤلف: علي حسين زبون
اسم المشرف: صاحب كحيط جاسم الساعدي
الموضوع العام: علوم الرياضيات
السنة: 2014
الموضوع الدقيق: الرياضيات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The aim of this thesis is to obtain the degree of best approximation of unbounded functions in locally - global weighted - space L_(P,δ,w) (X),1≤P<∞ using many kinds of polynomials such as I - Bernstein polynomials in terms of weighted Ditzain - Totik modulus of smoothness.II - Trigonometric polynomials S_n^* (f,x) and in addition to that we defined a new operator, which depends on Dirchlet Kernel G_(2n - 3n) - operator in terms of weighted Ditzain - Totik modulus of smoothness.III - q - Bernstein - Kantorovich B ̃_(n,q)^* (f,x) operator by using the locally second usual weighted modulus of smoothness.IV - The linear positive operators L_n^*⁡〖(f,x)〗 and K_n^*⁡〖(f,x)〗 for f∈L_(P,δ,w) (X),X=[0,∞) which is used to obtain the degree of the best approximation of this function in weighted space in terms of weighted modulus of function f.V - Szasz - Mirakjan - Beta U_n^* (f,x) and R ̃_n^* (f,x) operators in terms of weighted locally averaged modulus of smoothness.VI - Also supported by some important results to improve the approximation of unbounded functions classes.

المقاسات المجوفه من النمط والمقاسات شبه المجوفه من النمط == Hollow Modules and Semihollow Modules

اسم المؤلف: سميعه حسون عيدي
اسم المشرف: انعام محمد علي هادي
الموضوع العام: علوم الرياضيات
السنة: 2014
الموضوع الدقيق: الرياضيات
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: لتكن R حلقه ابدالية ذات محايد وليكن M مقاسا على R. Fleury في 1974 قدم ودرس المقاسات المجوفه، حيث يسمي المقاس M على R مقاسا مجوفا اذا كان كل مقاس جزئي فعلي في M مقاسا جزئيا صغيرا . العديد من الاعمامات للمقاسات المجوفه والمقاسات الجزئيه الصغيره قدمت من قبل العديد من الباحثين، بعض هذه الاعمامات هي : مقاس جزئي صغير من النمط - ، مقاس جزئي صغير من النمط - e، مقاس جزئي من النمط - F، مقاس جزئي صغير من النمط - p، مقاس جزئي صغير من النمط - T، مقاس جزئي شبه صغير، مقاس مجوف من النمط - ، مقاس مجوف من النمط - F ، مقاس مجوف من النمط ps - ، مقاس شبه مجوف. في هذا العمل، دراسة شاملة للمقاسات المجوفه من النمط -  اعطيت. من جهه اخرى قدمت ودرست المقاسات المجوفه من النمط - e، حيث يسمى المقاس M على R، مقاسا مجوفا من النمط - e اذا كان كل مقاس جزئي فعلي من M مقاسا جزئيا صغيرا من النمط - e. لدينا اولا : المقاسات المجوفه  المقاسات المجوفه من النمط -   المقاسات المجوفه من النمط - e لكن معكوس كل منها غير صحيح ويكون صحيحا تحت شروط معينه. العديد من التشخيصات، النتائج والخواص المتعلقة بهذه المفاهيم قد اعطيت. بالاضافه الى هذا، المقاسات شبه المجوفه من النمط -  والمقاسات شبه المجوفه من النمط - e قدمت ، حيث يسمى المقاس M على R مقاسا شبه مجوف من النمط -  (شبه مجوف من النمط - e) اذا كان كل مقاس جزئي فعلي منته التولد هو صغيرا من النمط -  (صغيرا من النمط - e). نتائج وعلاقات مختلفه بين هذه المفاهيم ومفاهيم اخرى ذات صله معها قد قدمت. الى جانب هذا، تم اعطاء اعمامات اخرى للمقاسات الجزئيه الصغيره والمقاسات المجوفه، تسمى شبه - (المقاسات الجزئيه الصغيره من النمط - e) وشبه - (المقاسات المجوفه من النمط - e). كذلك الخواص الاساسية لها قد اعطيت. | Let R be a commutative ring with identity and let M be an R - module. In 1974, Fleury introduced and studied hollow modules, where an R - module M is called hollow if every proper submodule of M is small". Many generalizations of "hollow module" and small submodule are introduced by several reserachers. Some of these generalizations are :  - small submodule, e - small submodule, F - small submodule, p - small submodule, T - small submodule, semi - small submodule,  - hollow module, F - hollow module, ps - hollow module, semihollow module. In this work, a comprehensive study of  - hollow module is given. On the other hand, e - hollow modules is introduced and studied. Firstly we have : Hollow modules   - hollow modules  e - hollow modules,but the converses are not true.However the converses are true under certain conditions. Many characterizations, results and properties related with these concepts are given. Moreover  - semihollow modules and e - semihollow modules are presented, where an R - module M is called  - semihollow (e - semihollow) if every proper finitely generated submodule is  - small (e - small).Various results and relations between these concepts and other related concepts are introduced. Beside these,other generalizations of small submodules and hollow modules, namely semi - e - small submodules and semi - e - hollow modules are introduced. Also their basic properties are given.

البرمجة الديناميكية المواجهة بواسطة شبه الزمرة == DUAL DYNAMIC PROGRAMMING VIA SEMIGROUP APPROACH

اسم المؤلف: ديانا صالح مهدي العنبكي
اسم المشرف: نصيف جاسم الجواري
الموضوع العام: علوم الرياضيات
السنة: 2014
الموضوع الدقيق: النظم الدينامية
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا العمل، تم تقديم البرمجة الديناميكية المواجهة ( اقتراب غير تقليدي ) لمسالة السيطرة المثلى بواسطة شبة الزمرة المستمرة بقوة حيث عرفت دالة القيمة المواجهة VD(. , .) لهذه المسالة مع ذكر خصائصها، حيث وجدنا بان هذه الدالة تحقق مبدا البرمجة الديناميكية المواجهة ومعادلة هاملتون - جاكوبي - بلمان. كذلك تم دراسة بعض الخواص لدالة القيمة المواجهة امثال انواع متنوعة من الاستمرارية والحدودية ومن ثم استخدام هذه الخواص لاثبات المبرهنة التي تتعامل مع الشرط الكافي للامثلية. ايضا تم اثبات نظرية تحقيق مناسبة لايجاد مسيطر تغذية استرجاعية مثلى مواجهة. واخيرا تم اعطاء مثال يوضح قيمة النظرية التي تتعامل مع الشرط الكافي للامثلية. علاوة على ذلك، تم تقديم البرمجة الديناميكية التقليدية والمواجهة لمسالة السيطرة المثلى ذات البعد المنته لبولزا مع الامثلة. | In this thesis, the dual approach to dynamic programming for the optimal control problem via strongly continuous semigroup have been presented. The dual value function VD(. , .) of the problem is defined and characterized. We find that it satisfied the dual dynamic programming principle and dual Hamilton Jacobi - Bellman equation.Also, some properties of VD(. , .) have been studied, such as, various kinds of continuities and boundedness, these properties used to give a sufficient condition for optimality. A suitable verification theorem to find a dual optimal feedback control have been proved. Finally an example illustrating the value of the theorem with the sufficient condition for optimality, have been given. Moreover, the classical and dual dynamic programming for finite dimensional optimal control problem of Bolza with examples have also been introduced.

حلولية بعض اصناف المعادلات التفاضلية الجزئية غير الخطية == Solvability of Some Classes of Nonlinear Partial Differential Equations

اسم المؤلف: احمد اسماعيل محمد
اسم المشرف: راضي علي زبون الساعدي
الموضوع العام: علوم الرياضيات
السنة: 2014
الموضوع الدقيق: الرياضيات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: نلخص الهدف الاساسي لهذا العمل حول دراسة الحلولية لبعض اصناف المعادلات التفاضلية الجزئية غير الخطية. طبقا" للحدود غير الخطية, حيث من الصعوبة احيانا" القيام بايجاد الحل (التحليلي| المضبوط) لهكذا صنف من المعادلات.في هذه الرسالة تبنينا منهجية ملائمة لايجاد الحلول. تستند هذه المنهجية على دمج طريقة (الهموتوبي المقلقلة) مع تقنية (كول - هوف ) للتحويل. طريقة (الهموتوبي المقلقلة) تعتبر طريقة فعالة لايجاد الحل التقريبي لبعض المعادلات الخطية وغير الخطية, في حين تعتبر تقنية (كول - هوبف) للتحويل مجرد الية تحول بعض المسائل غير الخطية الى خطية مضبوطة لها. لقد طورت هذه المنهجية لاكتشاف الحل لبعض المعادلات التفاضلية الجزئية غير الخطية ومسائل ذات الحدودية المتحركة وسميناها (ستراتيجية كول - هوبف - الهموتوبي المقلقلة).اخذنا بعض من معادلات (بيرجر) غير الخطية (متجانسة وغير متجانسة) مع الشروط الحدودية (متجانسة وغير متجانسة), كمثال لصنف المعادلات غير الخطية. في حين مسئلتي ستيفان للانجماد والذوبان اخذتا كمثال لصنف المسائل ذات الحدودية المتحركة مع المقارنات.المحاكاة العددية عرضت بجداول واشكال واظهرت مطابقات جيدة جدا" في المقارنات. | The aim of this thesis is to study the solvability of some classes of nonlinear partial differential equations. Due to the nonlinearities, sometimes, it is difficult to find the explicit (analytical or exact) solution to such class of equations where, a suitable procedure has been adapted for finding such solutions. The procedure is based on combining together the Homotopy Perturbation Method and a Cole - Hopf transformation technique. The Homotopy Perturbation Method is a powerful method for finding a solution (approximate) of some non - linear equation; while, Cole - Hopf transformation is nothing but a transformation that can be used to transform some non - linear equation into an exact linearized one. This procedure has been developed to find out a solution to some non - linear partial differential equations and non - linear moving boundary value problems; and we call it (Cole - Hopf - Homotopy Perturbation Procedure). The nonlinear (homogenous and non - homogenous) Burger's equations with (homogenous and non - homogenous boundary condition) as well as initial condition have been illustrated as given examples with comparisons, while a Stefan type problems of solidification of water and melting ice problem have been taken as an example of moving boundary value problems also. A numerical simulation has been presented with tables and graphs with a very good agreement of comparisons

دراسة تاثير المذيب والحامضية على شدة الفلورة وعلى الخواص الطيفية لمحاليل الفلورسين == Study the Effect of Solvent and pH on the Fluorescence Intensity and Spectral Properties of Fluorescein Solutions

اسم المؤلف: وليد خالد حمود
اسم المشرف: وليد صلاح عبد الوهاب
الموضوع العام: علوم الفيزياء
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم دراسة وقياس اطياف الامتصاص والتهيج والفلورة لمركب (الفلورسين) المذاب في المذيبات القطبية ( الايثانول, الميثانول ,الاسيتون ترايل ,الدايمثيل فورماميد ,الدايمثيل سلفوكسيد)عند الطول الموجي المهيج ((λex=480nm وبدرجة حرارة الغرفة .حيث تــم دراســـــة تاثير قطبيــــة المذيبات اعلاه على شــــدة طيــــــف الفلورة عند التركيزين (10 - 4 مول/ لتر) و(10 - 5 مول / لتر) فقد وجد ان شدة طيف الفلورة تقل مع زيادة قطبية المذيب وكذلك وجود ازاحة لقمة طيف الفلورة باتجاه الطول لموجي الطويل (ازاحة حمراء ) بينما الشدة تزداد عند التراكيز المخففة (لنفس المذيب) مع الزيادة في قيمة ال(pH) ما عدا الايثانول بسبب تقارب قيمة ال (pH) مع تغير التركيز.وكذلك تم دراسة الخواص الطيفية لمحاليل الفلورسين ومنها الكفاءة الكمية التي تم حسابها.كما تــم دراســـة تاثير pHعلــى شـــــدة طيــف الفلورة عنـد التركيزين (10 - 4 مول/ لتر) و(10 - 5 مول / لتر) فقد لوحظ عند اضافة القاعدة (NaOH ) او الحامض (HCl)عند التركيز(10 - 4 مول/ لتر) بان شدة طيف الفلورة تزداد ثم تنخفض تدريجيا(عدا الاسيتون ترايل) وان هناك ازاحة لطيف الفلورة نحو الطول الموجي الطويل (ازاحة حمراء) تثبت تريجيا عند قيمة معينة . اما عند التركيز(10 - 5 مول / لتر) فقد لوحظ بان شدة طيف الفلورة تزداد تدريجيا مع زيادة قيمة الpH بعد اضافة القاعدة (NaOH) مع وجود ازاحة لطيف الفلورة نحو الطول الموجي الطويل (ازاحة حمراء). وقد تم حساب الكفاءة الكمية لكل قيم pH المحسوبة.ان انخفاض الشدة لطيف الفلورة قبل وبعد اضافة الحامض او القاعدة هو بسبب تاثير قطبية المذيب وبسبب تاثير قيمة pH ووجود صيغ الفلورسين السائدة (dianion) او(monoanion) في المحاليل التي تلعب دورا كبيرا في شدة طيف الفلورة وقيمة الكفاءة الكمية | The absorption ,excitation and fluorescence spectra for fluorescein compound which dissolves in polar solvents (methanol, ethanol, acetonitrile , dimethylformamide and dimethyl sulfoxide) at excitation wavelength (λex= 480 nm) at room temperature were measured and investigated. Studying the effect of above solvent on the fluorescence intensity with the concentrations[1x10 - 4M], [1x10 - 5M], and it has been found that the fluorescence intensity decreases with increasing polarity of solvent. Also, it is found that the fluorescence spectra was shifted toward the long wavelength (red shift ) while it is observed that the fluorescence intensity was increased at diluted concentrations (for the same solvent) with increasing pH values except at (ethanol) because of the convergence of the value (pH) with the change of concentration. Also, studied the spectral properties of the solutions (fluorescein) including quantum efficiency were calculated . Studying the effect of pH on fluorescence intensity at concentrations [1x10 - 4M],[1x10 - 5M], had been observed when adding the basic (NaOH) or acid (HCl) at concentration [1x10 - 4M]. The relative fluorescence intensity increases and then decreases gradually (except Acetonitrile) , and there is the fluorescence spectra which are more shifted toward the longer wavelength (red shift) fixed gradually at limited value. While at the concentration [1x10 - 5M] , it had been observed that the intensity of fluorescence spectrum is gradually increasing with the increase in the value of the pH after the addition of the base (NaOH) , with the shifted toward the longer wavelength (red shift), and the quantum efficiency was calculated for each pH values. The decreasing intensity of the fluorescence spectrum before and after the addition of the acid or the base due to the effect of the solvent polarity and the effect of pH value ,it is found (dianion) or (monoanion) form has been found prevailing in solutions which play a major role in the intensity of fluorescence spectrum efficiency and value of quantity

دراسة العمق البصري للعوالق في منطقتين من العراق باستخدام تقنيات معالجة الصور الرقمية == Study the Aerosol Optical Depth in Two Regions of Iraq Using Digital Image Processing Techniques

اسم المؤلف: هدى عبد الامير عـبود الزهيري
اسم المشرف: علي عبد داود الزكي
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: معالجة الصور
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يتميز تلوث الهواء عن غيره من اشكال التلوث في انه سريع الانتشار حيث لا يقصر تاثيره على منطقة المصدر وانما يمتد الى المناطق المجاورة والبعيدة. يعتبر الهباء الجوي من اكثر ملوثات الهواء شيوعا وخاصة في المناطق الجافـة والصناعية والمناطق المكتظة بحركة مرورية، اذ يمكن ان تكون من اصول طبيعية او غير طبيعية، لذلك تم الاهتمام في قياساتها ولكون كتلتها قليلة لذا تم دراستها على اساس حجـومها. توجهنا في دراستنا الحاليـة لاجراء تحليلات احصائية لمجموعة من الصور الملتقطـة بجهاز الميكروسكوب للهباء المترسب على شرائح زجاجية حيث تم جمعها في ايام مختلفة وفي اشهر مختلفة وفي منطقتين هما (بغـداد : شارع فلسطيـن، وديالـى : الخالـص).اجريت دراسة تحليلية لنسب الهباء المترسب كدالة للزمن في اليوم الواحد وتم مقارنة نتائج المنطقتين وتحديد الفروق بينهما. استخدمت طريقتين بعدة خوارزمات احصائية مختلفة الاولى بحساب مساحة الهباء الجوي المترسب في مستوي الصورة والثانية بحساب حافة جسيم الهباء في مستوي الصورة.ثم حساب انصاف اقطار ومساحات واحجام هذه الجسيمات في الصورة لغرض تصنيفها كدالة لانصاف اقطارها. اهم النتائج التي حصلنا عليها هي معدل المساحة المغطات واختلافها بين المنطقتين (اذ تكون في بغداد اكثر من الخالص وهذا يعود الى طبيعة المنطقة وصفاتها). واظهرت الدراسة تاثير تغير سرعة الرياح على الهباء في الجو وعلى ترسبه طبقا لاحجامها. كذلك اختلاف نسب الترسب لساعات اليوم الواحد وايضا اختلافها بين المنطقتين. استحدثت طريقة جديدة لغرض حساب مساحة وحجم جسيمات الهباء الجوي بالاعتماد على تقنيات معالجة الصور الرقمية. تاخذ بنظر الاعتبار اشكال الجسيمات كروية ,طولية (منتظمة وغير منتظمة) ومتشعبة . ان التقنية المقترحة اظهرت كفاءة عالية واكثر فاعلية في حساب احصائيات التوزيع الحجمي لجسيمات الهباء الجوي وتستمر لفترة اطول مقارنة مع الاجهزة الاخرى التي تفقد كفاءتها على مر الزمن .اضافة الى سهولة التطبيق وتعتبر طريقة جيدة ولاتحتاج الى اجهزة ذات كلفة عالية. | Air pollution differs from other types of pollution; as it is dispersed quickly, and its impact is not limited to the area of origin but rather extends out to the neighboring and distant areas. Aerosol is one of the most common air pollutants especially in the dry, industrial and traffic - congested areas. Its origin could be natural or unnatural, and thus measuring it has been an important issue. Due to its tiny mass, it has been studied on the basis of its sizes. This current study is presented as an analytical and statistics study on a set of images taken via optical microscope of aerosol deposited on glass slides, and collected for several days throughout different months at two different regions (Baghdad/ Palestine Street - and Diyala/ Al - Khalis). The analysis has been performed through studying variant proportions on several measurements of aerosol particles as a time functions, and subsequently the variance in results between the two regions was considered by analyzing the aerosol images. Two methods were used employing statistical algorithms; the first method was by calculating the deposited aerosol area on the image plane. While the second method was by measuring the aerosol particle edge on the image plane, and then measuring the radii, areas and volumes of these particles in the image, and eventually by classifying them as a function of their radii.One of the most significant results we obtained was the average covered area and its variance between the two regions. This average covered area was larger in Baghdad than in Khalis, and this is due to the nature of each region and its properties in addition, wind speed impact on the aerosol and on its deposition according to its size. Furthermore, the different results of deposition proportions are based on the hours of a day also the difference between two regions. Through the present work, a new method of measuring area and volume of deposited aerosol particles with their various shapes whether spherical, longitudinal or intertwined has been concluded depending on image processing techniques . These methods are considered as more effective, more efficient in calculating the statistic volumetric distribution of aerosol particles and last longer compared to other appliances that lose efficiency over time. In addition easily to apply and it’s consider a good method and doesn’t need expensive equipment.

دراسة بعض التطبيقات التحسسية لاغشية اوكسيد القصدير المشوبة بالانديوم == Study Some Sensing Applications of Indium Tin Oxide(ITO)Thin Films

اسم المؤلف: هبة نوري ذاكر
اسم المشرف: علي جاسم محمد الجابري
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: الاغشية الرقيقة
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا البحث تم تحضير اغشية ثنائي اوكسيد القصدير SnO2 النقية والمشوبة بالانديوم (In ) وبنسب تشويب مختلفة (5,10,15) % بطريقة الرش الكيميائي الحراري حيث رسبت على قواعد زجاجية .الجزء الاول من البحث تضمن دراسة الخصائص الفيزيائية للاغشية المحضرة : التركيبية , الكهربائية والتحسسية (الكهرواجهادية والامبيرومترية) حيث درست بشكل مكثف.طبوغرافية السطح للاغشية درست بتوظيف حيود الاشعة السينية والمجهر الماسح الالكتروني (SEM) ومجهر القوة الذري (AFM) . تاثير كبير لتركيز ايونات الانديوم على طوبوغرافية السطح تمت ملاحظته , حيث ان صور مجهر القوة الذري بينت تاثير زيادة تركيز ايونات الانديوم على كل من الخشونة ومعدل الحجم الحبيبي , اضافة الى تناقص الحجم الحبيبي من 136.16 الى 73.53 نانومتر في حين ازدادت الخشونة من 1.04 الى 2.86 وهذا بسبب وجود عدد من الهضاب التي توزعت بشكل عشوائي على السطح. اثبتت قياسات حيود الاشعة السينية ان الاغشية المحضرة بالرش ذات تركيب متعدد التبلور من نوع رباعي (Tetragonal) وباتجاه تفضيلي عند المستوي ,(110)مع وجود ثلاث قمم صغرى تعود للمستويات 101)),(200),(200) وهذه القمم تصغر وتضمحل بزيادة نسبة الاشابة بالانديوم .درست الخصائص الكهربائية المتضمنة منحني (I - V) عند الظلام , فقد بينت النتائج ان التيار المستمر يزداد مع زيادة نسبة الاشابة بالانديوم .الجزء الثاني من البحث فقد تضمن دراسة خصائص التحسس للاغشية المحضرة وبالذات الخصائص الكهرواجهادية , وتم اجراء القياسات بتعريض الاغشية لموجات تضاغطية بمدى واسع من الترددات (1 kHz - 10 MHz) ولفولتية انحياز ضمن المدى (0 - 15 V) لثلاث اوساط : الهواء , الماء ومحلول الكلوكوز المائي , وتم تسجيل التردد الرنيني المناظر لكل قيمة من قيم تركيز الكلوكوز (0.05, 0.1, 0.15, 0.2, 0.25)% لكل من الاغشية النقية والمشوبة انفة الذكر.استنادا الى ماذكر اعلاه فان بلورة ثنائي اوكسيد القصدير واحدة من البلورات الكهرواجهادية وذلك من خلال الاستجابة الجيدة للاغشية للترددات الرنينية , لقد اجريت القياسات المذكورة لتراكيز مختلفة عند درجة حرارة الغرفة وقد وجد ان تيار التحسس يزداد بزيادة تركيز الكلوكوز ويتناقص مع زيادة نسبة الاشابة بالانديوم . تزداد الخصائص التحسسية الكهرواجهادية والتيار بازدياد نسب الكلوكوز وازدياد نسب الاشابة بالانديوم وافضل تحسس عند 15% من تركيز الاشابة بالانديوم | In the present work, undoped SnO2 films and doped with In films with various doping concentration 5, 10 and 15% are prepared in chemical spray deposition method in which the films are deposited on glass substrates. The first part of the work studies the physical properties of the as deposited pure and In doped SnO2 thin films, including . Structural, electrical, and sensing (piezoelectric and amperomtric) properties of these films have been studied intensively. The surface topography of the films is studied by using the X - ray diffraction,and the Scanning Electron Microscopy (SEM) and the Atomic Force Microscopy(AFM)the influence of the indium concentration on film surface morphology has been cosederd . Film roughness (RMS) and average grain size are affected by varying indium addition concentrations, XRD measurements have proven that the sprayed films are polycrystalline structural of a tetragonal type with the (110) plane as preferential crystallographic orientation for all prepared samples in addition to three small peaks belong to the (101), (200) and (211) planes, these peaks decrease and vanishe with increasing of doping concentration. The grain size decreases from 136.16 to73.53nm and the roughness incrrease from 1.04 to 2.86 nm for (5, 10and15)% due to the existence of many hillocks, which are faceted and distributed randomly on the relatively smooth surface.The electrical properties includ (I - V) current in the dark condition have been studied, the results show that direct current increase with the increase of doping concentration. The second part of the work studies the sensing properties of the prepared films in a special case, the sensitive characteristics (piezoelectric). The measurements are carried out by exposing the thin film to mechanical waves in a range of sweeping frequencies of (1 kHz - 10MHz) at bias voltage in the range of (0 - 15V). The characteristic resonance frequency is recorded, due to the glucose concentration of (0.05, 0.1, 0.15, 0.2 and 0.25) in aqueous solution for undoped and doped Indium (5wt.%, 10wt and 15wt.%). The results were showed conclusively that the SnO2 crystal is one of the most candidate piezoelectric crystals, namely that these thin films have good response for resonance frequency. The glucose sensing behavior of the films is observed for various concentrations at room temperature . The sensing current is found to be increase with the increase in the glucose concentration and decreased with increase in a doping concentration. The sensitivity properties for piezoelectric and current increase with increase glucose concentration and increase with increase doping concentration and the best sensitivity at 15% of Indium concentration.

تاثير المعاملة الحرارية على الخواص البصرية للخلائط البوليمرية (PVC/PS/PMMA) == Effect of Heat Treatment on Optical Properties of Polymer Blends (PVC/PS/PMMA)

اسم المؤلف: محمد زورة حسن
اسم المشرف: اسرار عبد المنعم سعيد
الموضوع العام: علوم الفيزياء
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: العمل الحالي من البحث يهتم بدراسة تاثير نسبة الخلط على الخواص البصرية للنماذج البوليمرية مدار البحث PS, PMMA] [PVC, والخلائط الثنائية ] [PS/PMMA, PVC/PMMA, PVC/PS والخلائط الثلاثية [PVC/PS/PMMA] وبمختلف التراكيز. كذلك دراسة تاثير المعاملة الحرارية على الخواص البصريه للانظمة البوليمرية [PVC/PS/PMMA] والخلائط الثنائية بنسبة [50 %PS/50%PMMA, 50% PMMA/ 50% PVC / 50% PS /50% PVC] صبت العينات كاغشية من البوليمرات المذكورة اعلاه والخلائط الثنائية والثلاثية ولمختلف التراكيز . وفحصت النماذج البوليمرية المحضرة طيفيا لاختيار نماذج البوليمرات ذات افضل خواص بصرية وجد بان الخليط الثنائي ( 50% PMMA/ 50% PVC) يمتلك احسن خواص بصرية وقد وجدت فجوة الطاقة الخليط تساوي(4.8eV) .اخضعت البوليمرات النقية[PVC/PS/PMMA] , مع الخلائط الثنائية[50 %PS/50%PMMA, 50% PMMA/ 50% PVC 50% PS /50% PVC] الى المعاملة الحرارية ضمن المدى[50 - 175 ºC] ولمدة ساعتين لدراسة تاثير المعاملة الحرارية على الخواص البصرية .لوحظ بالنسبة للانظمة البوليمرية المعاملة حراريا تغير في اطياف الامتصاص وضمن مديات الطول الموجي والتي تعتمد على نوع البوليمر والخليط البوليمري. التحلل الحراري ادى الى زيادة في اطياف الامتصاص للنماذج المعرضة للحرارة.حيث تعتمد الزيادة على نوع البوليمر والخليط البوليمري خصوصا عند درجة الحرارة 175 ºC بالنسبه الى(PS (وجد تناقص في اطياف الامتصاصية في الحالات التي يتسبب فيها التفكك الحراري بتلف سطحي مثل التصدعات والتشققات . حسبت فجوة الطاقة وطاقة اورباخ قبل وبعد المعاملة الحرارية للنماذج البوليمرية مدار البحث .اظهرت النتائج السلوك اللاخطي لعلاقه الترابط ما بين الثوابت البصرية والنسب الوزنية للخليط البوليمري قد اعزيت الى كونها غيرمتوافقة الخلط .ان السلوك اللاخطي لعلاقة الترابط بين الثوابت البصرية ودرجة الحرارة للنماذج البوليمرية المعاملة حراريا يعود الى التفكك الحراري غير النظامي لنماذج البحث . ولقد تم الكشف عن التلف السطحي ] التصدعات والتشققات[ الناجم عن التفكك الحراري باستخدام الميكروسكوب وجهاز المجهر الالكتروني الماسح[SEM] وجد بان التفكك الحراري من السهولة ان يحدث تلف سطحي ميكانيكي. لتحديد الخواص الرئيسيه للحزم اجريت فحوصات [FTIR] للنماذج البوليمرية قبل وبعد المعاملة الحرارية لتمييز خواص الحزم الرئيسية وتفسير نتائجها. | The present work was concerned with study of the blending ratio effect on the optical properties of the polymer systems involved [Poly(vinyl chloride) (PVC), Polystyrene (PS), Polymethylmethacrylate (PMMA)], binary blends [PS/PMMA, PVC/PMMA, PVC/PS] and ternary blends [PVC/PS/PMMA] at different concentrations. Also this work was concerned with study the effect of heat treatment of optical properties of polymer system involved [PVC/PS/PMMA] and binary blend with ratios, [50 %PS/50%PMMA, 50% PMMA/ 50% PVC and 50% PS /50% PVC]. The samples were casted as films from the homopolymer stated above and the blends as a binary and ternary blend at different concentration. These prepared polymer systems were evaluated spectrophotometically for selection the polymer systems of the best optical properties. It was found that 50% PMMA/ 50% PVC binary blend has the best optical properties. The results showed that its energy gap was (4.8eV). The homopolymer [PVC/PS/PMMA] and the binary blend [50 %PS/50%PMMA, 50% PMMA/ 50% PVC and 50% PS /50% PVC] were subjected to heat treatment with range of [50 - 175 ºC] for (2hr) to study the effect of heat treatment on their optical properties. The absorption spectra of the heat polymer systems showed heating induced absorption changes in the wavelength range, which depends on the polymer type and polymer blend. The thermal degradation caused increment in the absorption of degraded samples. The increment depended on the polymer type and polymer blend especially at 175 ºC. For (PS) decreasing in absorption was also found for cases in which, thermal degradation caused surface damage i.e. cracks and crazes formation. Also the optical energy gap and urbach energy were calculated the absorption spectra before and after heat treatment to the polymer systems involved.The results showed nonlinear relationship between the optical constants and blend ratio, it was attributed to their immiscibility. The nonlinear relationship between the optical constant of the heat treatment polymer systems and polymer blend with the heating temperature was attributed to the unsystematic thermal degradation induced by heating. Morphological investigations for the surface damages [crazes and cracks] caused were performed by optical microscope and SEM. It was found that the thermal degradation lead to some mechanical surface damage. FTIR spectroscopy was carried out for polymer systems before and after heat treatment to identify the region of the main characteristic bands and its results was investigated.

تاثير الربط والعزل على المقطع العرضي للايقاف الالكتروني

اسم المؤلف: غفران محمد علوان
اسم المشرف: خالد عبد الوهاب احمد
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: فيزياء الالكترونيات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم عمل صيغة رياضية نظرية لدراسة وحساب تاثير الربط والعزل على المقطع العرضي لقدرة الايقاف الالكترونية عن طريق اخذ ايونات ذات عدد ذري (Z1 > 2) مثل ( O, C, B ) في اهداف من (Al, C, Si) باستعمال ثلاثة انواع من الجهود المؤثرة Veff (Yukawa, Moliere and Universal) ولنوعين من الايونات هي (Stripped, Screened) وتم الحصول على النتائج بالاعتماد على النظرية الثنائية. تمت دراسة قدرة الايقاف بالاعتماد على نوعين من التصادمات، التصادمات القريبة التي تعامل كتفاعلات كولوم الحرة، والناتجة من اعتماد الطاقة المنتقلة ازاء معامل التصادم، والتصادمات البعيدة التي تاخذ في حساباتها طاقة الربط لالكترونات الهدف وذلك عبر التردد الرنيني الكلاسيكي.وبالاعتماد على عامل بور كاباK_B=(2Z_1 v_0)⁄v فقد وجد ان هناك اتساع لحدود نظرية بور عند السرع الواطئة . ان النظرية الثنائية هي تحديث مهم لنظرية بور القديمة، وقد طورت لحساب قدرة الايقاف للايونات الاثقل من الهيليوم في النظام الكلاسيكي. وتم في العمل الحالي حساب المقطع العرضي للايقاف لبعض الايونات الساقطة على الهدف ومقارنة هذه النتائج مع البيانات العملية من برنامج الـ(SRIM2003) المنجزة من قبل Ziegler. وجد ان زاوية التشتت وزمن التصادم دورا مهما في حساب المقطع العرضي للايقاف باستعمال النظرية الثنائية. تم استخدام ثلاث انواع من الجهود في العمل الحالي (Yukawa, Moliere and Universal) لمعرفة تاثير دالة الحاجز φ (r/a) على زمن التصادم وزاوية التشتت. ووجد ان اكبر تاثير ياتي عند مؤثرات التصادم العالية x = ωp/υ ≥1. كما تبين ان النظرية الثنائية لها قابلية التطبيق على مدى واسع من الطاقات عكس الطرق السابقة التي كانت محدودة الطاقات. وقد اعطت الحسابات وفقا للنظرية الثنائية نتائج تقريبية وبدون تحديد لمعامل التصادم الحرج (p_(0 )) بين التصادمات القريبة والتصادمات البعيدة وتفادي تطبيقات نظرية الاضطراب. تم في عملنا هذا كتابة برنامجين بلغة فورتران 90 بمساعدة Compaq Visual Fortran (CVF6.6) لتنفيذه. | A theoretical form for studying and calculating Binding and screening effects of electronic stopping cross - section has been done by taking (Z1>2) like (O, C, B) ions in (Al, C and Si) targets using three types of effective potential Veff (Yukawa, Moliere and Universal) for Stripped and Screened ions. The application of these potentials was done by using Binary’s theory. The stopping power has taken into consideration for the two types of collisions; Close collisions are treated as free - coulomb interactions, resulting in the dependence of the energy transfer versus impact parameter, and the distant collisions are taking into account the binding of target electrons and enter through a classical resonance frequency. At low velocity should be extended to Bohr’s theory are found to be dependent on the factor Bohr Kappa ( The Binary theory is a powerful update of the old Bohr theory. It has been developed to calculate the stopping power of the ions heavier than helium in the classical regime. In the present work, the calculated stopping cross sections for some incident ions in targets are compared with experimental data from SRIM2003 software presented by Ziegler. Scattering angle and time integral play an important role in calculating stopping cross - section when using binary theory. In the present work the three types of potential (Yukawa, Moliere and Universal) have been used to investigate the effects of screening functions φ (r/a) on time integral and scattering angle. Most effect comes at high impact parameters χ = ωp/υ ≥1. The Binary’s theory is applicable for all energy range while the previous work is limited in energy range. Binary theory gives an accurate results with no need to specify critical point ( between close and distant collisions, and application of perturbation theory is avoided. Two programs have been written in Fortran 90 with the aid of Compaq Visual Fortran (CVF 6.6) for executing.

دراسة تاثير المضاف 2 - ميثيل نفثالين على نظام اروماتي (انثراسين / 2 - ميثيل نفثالين) == Study of doping effect of 2 - Methylnaphthallen in aromatic system (2 - Methylnaphthallen/Anthracene )

اسم المؤلف: علي كاظم وداي
اسم المشرف: زياد عدنان صالح
الموضوع العام: علوم الفيزياء
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا البحث, اخذ اطياف الفلورة للانثراسين المذاب في دايا ميثيل سلفوكسايد بالتركيزين M] [10 - 3,[10 - 4 M] حيث اظهر اربع حزم اهتزازية واضحة وقد تم تهييجه بطول موجي هو 365nm)) وكذلك تم اخذ طيف ثنائي ميثيل نفثالين النقي المذاب في دايا ميثيل سلفوكسايد وقد اظهر ثلاث حزم اهتزازية وقد تم تهييجه بطول موجي هو (270nm). وقد تمت هذه القياسات بدرجة حرارة الغرفة.اظهرت قياس اطياف الامتصاص والفلورة لمحلول الانثراسين المشوب بثنائي ميثيل نفثالين بنسب مختلفة, بتراكيز مولارية مختلفة تبدء من [10 - 3M] الى [10 - 4M] وبطول مهيج (270nm). واظهرت قياسات اطياف هذه المحاليل تبادلا للشحنة الذي يقود الى انتقال للطاقة من جزيئة المضاف ثنائي ميثيل نفثالين الى جزيئة المضيف الانثراسين باطياف الفلورة عند التراكيز اعلاه. تقود هذه النتائج الى تناقص نسبة انتقال الطاقة المحددة من خلال طريقة ميكانيكية تبادل الالكترون. هذا الانخفاض له عدة اسباب منها وجود الفخاخ (traps) والى الامتصاص الذاتي القوي لبلورة الانثراسين .ان ظهور حافة حادة في طيف الفلورة لجزيئة المضاف (2mn) يشير الى وجود امتصاص ذاتي قوي لطيف هذه الجزيئة مما يؤثر على معدل انتقال الطاقة كما اظهرت النتائج تزايد عامل الكبت مع تزايد التركيز .و يتبين من دراستنا للخصائص الكهربائية والتوصيلة الكهربائية هذه لوجود طاقاتي تنشيط لجزيئة الانثراسين المشوبة بنسب مختلفة من جزيئة ثنائي ميثيل نفثالين ولكل طاقة تنشيط ميكانيكية توصيل مختلفة والمحضرة على الواح كوارتز والزجاج على حد سواء وبتركيز مولاري [5*10 - 2 M], التي يمكن تفسيرها بالاعتماد على نظرية الحزم لشبه الموصل والتي تقترح انتقال حاملات الشحنة من مستوى فيرمي المانح الى حزمة التوصيل في شبه الموصل السالب (n - type) عند درجات الحرارة العالية بواسطة التهيج الحراري . معلمات تركيب الشبيكة للاغشية الرقيقة للانثراسين المشوب بثنائي ميثيل نفثالين التي حللت بواسطة (a LabX XRD 6000 SHIMADZU XR - Diffractometer with Cu Kα radiation) , يظهر تاثير التشويب على الافلام الرقيقة للانثراسين بشكل واضحا. وتم الحصول على نمط الحيود بزاوية (2θ) وتبدء من (20°) الى (60°) وبزاوية مجسمة مقدارها (5°) . وكلاهما ثنائي ميثيل نفثالين المضاف الى الانثراسين كشائبة يظهر طيف حيود الاشعة السينية عمليا قمة حاده وقمتان صغيرتان, وهذا يعني لنا ان الاغشية الرقيقة ذات طبيعة تركيبية متعددة التبلور. | In this research, The fluorescence spectrum of Anthracene dissolved in dimethylslfoxayd was studied then showed four obvious vibrated bands ) λex=365nm). Moreover, the spectrum of pure (2 - Methylnaphthalene) dissolved in dimethylslfoxayd was dealt with and it showed three vibrated bands and it has taken at a wavelength (λex=270nm). The measurements was at the room temperature. The absorption and fluorescence spectra of solutions for anthracene doped with 2 - Methylnaphthalene with different ratios, had been measured with different molarity concentrations starting from the [10 - 3M] to [10 - 4M] and at excited wavelength) λex= 270 nm). The measurements of these solutions spectra showed the electron exchange, which led to the energy transfer from the guest (2 - Methylnaphthalene) to the host (Anthracene) with getting fluorescence at the above concentrations. The results led to a decrease in the rate of the energy transfer calculated in the way of energy transfer through mechanical electron exchange. This decline has several causes including the existence of (traps) and to the strong self - absorption of the anthracene crystal.The appearance of a sharp edge in the fluorescence spectrum of the guest (2 - methyl naphthalene) molecule indicates a strong self - absorption spectrum of this molecule which affects on the rate of energy transfer. Also, the results showed the increasing of the quenching factor with the increasing of the concentration.This study shows the presence of energies activation Anthracene doping different proportions of 2 - Methylnaphthalene which were prepared on a substrate of glass and quartz are both which have been used at molarity concentration [5*10 - 2M]. Each activation energy has different mechanical connecting which could be interpreted by relying on the bands theory of semiconductor which proposes a transition charge which carriers from the fermi donor to the conduction band in the semiconductor negative (n - type) at high temperatures by thermal excitation.The structure and lattice parameters of anthracene dopant 2 - Methylnaphthalene thin films were analyzed by a LabX XRD 6000 SHIMADZU XR - Diffractometer with Cu Kα radiation. The effect of the Anthracene dopant on the structure of the film is clear. Diffraction pattern was obtained with 2θ starting from 20° to 60° at 5° solid angle. In both the as - deposited and Anthracene - doped 2 - Methylnaphthalene thin films, the X - ray diffraction spectra possess one sharp and two small peaks. It means that the film is polycrystalline in nature structure

تحضير ودراسة الخصائص الفيزيائية والمكانيكية للمادة المرتكبة المحضرة من سيراميك الكودراتيت المدعمة بالنحاس == Preparation and study the physical and mechanical properties of Cu reinforced cordierite ceramic composites

اسم المؤلف: علاء رافد علي
اسم المشرف: انوار حسين علي الفؤادي
الموضوع العام: علوم الفيزياء
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: A raw material mixture was used for forming the ceramic matrix cordierite(Cor), was included Iraqi clay (Kaolin Duekhla), Alumina and Talc. Prepare (Cu/Cor) composite, were obtained by addition a fine powder (99.99%) of copper as a reinforcement material, to cordierite ceramic with different percentage ratios (10, 20, 30 and 40) wt%. The temperatures for preparing the composite are (700,800) °C ,and the time of treatment is (1,2) hours respectively. The result of X - ray revealed that the peaks of cordierite phase decreased with increasing the additive amount of copper and slightly increased as temperature elevated from 700 oC to 800oC. Scanning electron microscope (SEM) test was used to observe morphology of blend materials . The comparison results of microphotograph images of cordierite ceramic and (Cu/Cor) composite with 40 wt % Cu , shows that the surface of cordierite sample is uniformly and compactly interference by copper distribution particles led to decreasing the porosity with increasing temperature to 800°C for two hours. The measurement of bulk density and apparent porosity was carried out according to Archimedes method and according to (ASTM) procedure, the results show that the density and thermal conductivity of (Cu /Cor) composite samples increased with increasing copper content ratios up to 40 wt% at the heat treatment (700,800) °C for (1,2) hours respectively. The results of calculation of apparent porosity (Por) and water absorption (%) was shows that, the values were decreased at 800°C more than 700°C ,for two hours more than one hours and at copper content ratio 40% more than (30, 20 and 10) respectively. Vickers micro hardness test is carried out by using "Digital Micro hardness tester VHS 1000. The presence of copper decreases the hardness, in comparison with the untreated ceramic sample(without copper) while the compressive strength increased with the increasing the temperature and copper content ratio from (38) to( 167.8 ) MPa at 800˚C . The addition of copper up to 40% in cordierite matrix lead to decrease of pores and then enhance the densification of (Cu/Cor) composite

تحديد مديات الاجسام وابعادها الغاطسة في الماء باستخدام تقنيات معالجة الصورة الرقمية وتحديد موديل رياضي لمعامل انكسار السوائل الشفافة == Under water objects range and dimensions using digital image processing technique and determine the depths as a function of camera viewing angle

اسم المؤلف: سماهر وحيد هاشم
اسم المشرف: علي عبد داود الزكي
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: معالجة الصور
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: انتشرت انظمة قياس ابعاد الاجسام الغاطسة في الماء التي تعتمد على استخدام الكاميرا الرقمية على نحو واسع في الاونة الاخيرة , وعلى وجه الخصوص في الانظمة الروبوتية , لقلة تكلفتها ,وسهولة تركيبها , وسرعتها , وكونها امنة ودقيقة بما يكفي مقارنة بانظمة القياس المعقدة الاخرى ، التي تستخدم الليزر او المتحسسات الكهرومغناطيسية . لذلك توجهنا في دراستنا الحالية الى استعمال كاميرراقمية في تحديد طول الجسم بالبكسل Lp وايجاد موديل رياضي لطول الجسم بالبكسل Lp كدالة لعمق الجسم الغاطس في الماء h . وبعد حساب معامل التكبير m للاجسام الغاطسة في الماء ، تم الحصول في هذه الدراسة على موديل رياضي يربط بين معامل التكبير m وعمق الاجسام الغاطسة في الماء h وزاوية التصوير في الكاميرا θ , ومن خلاله تم حساب عمق الجسم , واظهرت النتائج تطابقا عاليا بين القيم الفعلية والقيم المستنتجة من الموديل الرياضي . اما في الحالة الثانية فقد تم ايجاد ابعاد الاجسام الغاطسة في الماء , حيث تم استحداث موديل رياضي يربط بين عامل التدرج Scf وعمق الجسم الغاطس في الماء h وزاوية التصوير للكاميرا θ ومن هذا الموديل الرياضي يمكن ايجاد اي واحد من المعاملات الثلاثة في حال كون اثنين منها معلومة , وقد تم اختبار الموديل لايجاد عمق الجسم الغاطس في الماء وكذلك ايجاد ابعاد الاجسام المجهولة الغاطسة في الماء والنتائج التي تم الحصول عليها كانت قريبة جدا من القيم الحقيقية. كما تم حساب معامل التكبير m وعامل التدرج Scf لايجاد علاقة رياضية تربط بين معامل التكبير وعامل التدرج وزاوية التصوير في الكاميرا لحساب معامل التكبير. وقد عني الجزء الاخير من هذه الدراسة بحساب معامل الانكسار البصري اذ تم اقتراح طريقة جديدة وسريعة وفعالة في تحديد معامل انكسار السوائل ضمن مدى الاطوال الموجية المرئية , اذ حددت العلاقة بين طول الجسم بالبكسل Lp مع العمق الظاهري للجسم الغاطس في السائل hi في حال معرفة معامل انكسار السائل (الماء) , ثم ايجاد علاقة رياضية يمكن اعتمادها كموديل رياضيا فعالا في تحديد معامل انكسار اي سائل شفاف اخر ، حيث تم تطبيق هذا الموديل لحساب معامل انكسار سائل اخر (البنزين) باعتماد المعادلة نفسها في حالة غمر الجسم نفسه فيه . وقد اظهرت النتائج دقه عالية في عملية حساب معامل الانكسار , واظهرت تطابقا بين القيمة الفعلية والقيمة التي تم حسابها في التقنية المقترحة وبنسب خطا ضئيلة جدا. | The measuring systems of dimensions of the immersed objects in water that base on the using of the digital camera are widely spread nowadays, especially in the robotic systems, because they are easy to install, fast, safe, inexpensive, and sufficiently accurate as compared with other complicated measuring systems that using the laser or electromagnetic sensors. Therefore, in the current study we intended to use a digital camera to determine the length of object in Pixels (Lp) and to find mathematical model of the length of the object in Pixels as a function to depth (h) of the immersed object in water. In this study, after calculating the magnification factor (m) of the immersed object in water, we have obtained a mathematical model relates the magnification factor (m) with the depth of the immersed object in water (h) and the angle of the taking picture (θ), then we have calculated the depth of the immersed object, the results showed a high matching between the actual values and the calculated values from this mathematical model. In the second phase of the study we have found the dimensions of the immersed objects in water by developing a mathematical model relates the scale factor (Scf) with the depth of the immersed object in water (h) and the angle of the taking picture (θ), from this mathematical model we can find any one of these parameters in case two of them are known. We have tested this mathematical model to find the depth of immersed object in water and to determine the dimensions of the unknown immersed objects in water. The results were very close to the actual values. Then we have calculated the magnification factor (m) and the scale factor (Scf) to find a mathematical relationship that relates the magnification factor with the scale factor and the angle of the taking picture to calculate the magnification factor. The last part of this study focuses on the calculation of the optical refractive index, where we have proposed a new, fast, and effective method to determine the refractive index of the liquids within the range of the visible wavelengths. We identified a relationship between the length of object in Pixels (Lp) and the apparent depth of the immersed objects in the liquid such as (water) (hi) in case of value of refractive index was known. Then finding mathematical relationship can be adopted as an effective mathematical model to determine the refractive index of another transparent liquid. According to this equation, we have calculated the refractive index of benzene in case we have immersed the same object in it. The results showed high accuracy in the calculating the refractive index, and also showed a symmetry between the actual value and the calculated ones with a very low error rate in the proposed technique.

تحضير ودراسة الخصائص الامتصاصية لاكاسيد الفيرايت باستخدام طريقة السيراميك == Preparation and Study the Absorption Properties of Ferrite Oxides using Ceramic Method

اسم المؤلف: زياد طارق اسماعيل العبوسي
اسم المشرف: كاظم جواد كاظم الشجيري
الموضوع العام: علوم الفيزياء
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Compounds of ferrimagnetic materials were prepared in this work in order to investigate and evaluate the microwaves absorption at X - band with the range of frequencies (8 - 12.5 GHz) and Ku - band with the range of frequencies (12.5 - 18 GHz). And the second band is used for the first time in Iraq.Conventional Ceramic techniques (the solid state reaction method) were used to prepare three compounds of spinel ferrite : Cu - Zn ferrite, with formula (Cu1 - xZnxFe2O4), Mg - Zn ferrite, with formula (Mg1 - xZnxFe2O4), and Ni - Zn ferrite, with formula (Ni1 - xZnxFe2O4) at values of x = (0.0, 0.1, 0.3, 0.4, 0.5, 0.6), where x is the proportion of zinc in the ferrite, as bulk (54) samples of rectangle in dimensions (22.6*10*10 mm) within in X - band refine it to make its dimensions (15.5× 7.5×10) mm within in the Ku - band.The resonance peaks of three types of spinel ferrite appeared at the frequencies (9, 10, 11, 14, 15, 16, 17) GHz, and these peaks remain at the same frequencies with a different thickness for all types of ferrite, this indicates that the peaks are not related to thickness.For all samples it was found that the effect of increase the thickness and sintering temperature increased the values of attenuation and absorbance. And the best values of the absorbency were in the range of (Ku - band).The value of total transmission and the absorbance is 100% for sample of (Ni0.9Zn0.1Fe2O4) were the best values at (1050) °C then (14) GHz.The best results were obtained in this research, and the best values of absorbance and stability are (CuFe204, Cu0.9Zn0.1Fe2O4, Cu0.9Zn0.1Fe2O4,Cu0.4Zn0.6Fe2O4) that had been burned by (1000, 1050, 1100, 1050) respectively. These samples were range of (Ku - band).The best result was similarity in behaviour of absorbance for the sample (Mg0.6Zn0.4Fe2O4) at the range (X - band).X - ray diffraction results showed that the structure was polycrystalline for all samples and for all (X) values.The density of samples greatly depends on the temperature of sintering, witch increases proportionally with the temperature of the sintering

الدراسه النظريه لتصميم ماكنه بؤره البلازما وتحقيق العوامل المختلفه التي تؤثر على حصيله النيترون المنبعث == Theoretical study to design plasma focus machine and investigate various parameters that affect its emitted neutron yield

اسم المؤلف: رنا عيســـى بــك مــــراد
اسم المشرف: مصطفى كامل جاسم | رعد حميد مجيد
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: فيزياء البلازما
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا البحث تم تصميم جهاز بؤرة البلازما الكثيفة نظريا بالاعتماد على موديل (لـــي) بناءا المعادلات الرياضية لنموذج لي لكل من هندسة القطبين وعناصر الدائرة الخارجية التي تضم متسعة ومحاثة ومقاومة (RLC). وبعد اجراء الحسابات اللازمة تم ادخال نتائج التصميم في برنامج لرؤية مدى امكانية تشغيله نظريا من خلال دراسة المعلمات المختلفة التي يوفرها البرنامج وبالتالي التعرف على ظروف تشغيله والعوامل المؤثرة عليه. لقد اختير غار الديترويوم كغاز عامل في هذه المنظومة للحصول على ناتج نيتروني من اجل التفاعل النووي الاندماجي. وتم اختبار ودراسة المنظومة عند ضغطين مختلفين (3و4 تور) حيث درست مختلف معلماتها التي يوفرها البرنامج ونوقشت وقورنت النتائج بالاشكال البيانية. اضافة لذلك تمت مقارنة المنظومة المصممة مع منظومة قياسية تناظرها من حيث التركيب النظري وهي منظومة NX2 التي بنيت اساسا للحصول على الاشعة السينية باستعمال غازات النبيلة. اختير في البحث ان يكون غاز الديتريوم هو الغاز العامل للحصول على ناتج نيتروني من اجل المقارنة، حيث درست جميع معلمات التشغيل للمنظومة المصممة مع القياسية بالرسوم البيانية.لقد وجد من خلال انجاز الحسابات اللازمة بان الشكل البياني لانحدار تيار الانبوب الكلي (dip) مباشرة بعد قمة التيار مع الزمن للمنظومة المصممة متفق تماما مع الشكل العام المميز لمنظومات بؤرة البلازما التجريبية دلالة على ان حسابات التصميم صالحة لهذه المنظومة وبالتالي يمكن اجراء الحسابات. ان تصرف فولتية الانبوب مع الزمن للمنظومة المصصمة كان بنفس الشاكله مع المنظومة القياسية. وينطبق هذا على سلوك المعلمات الاخرى بين المنظومتين مثل السرعة والمسار المحوريان والمسار الى الداخل للصدمة الشعاعية ومسار وسرعة استطالة القرص ومسار وسرعة الصدمة المنعكسة شعاعيا وغيرها.تم دراسة ومقارنة تغيرات درجة حرارة البلازما مع الزمن للمنظومتين عند نفس الضغط ولضغطان مختلفان للمنظومة المصممة وكان تصرف ماكنتا بؤرة البلازما بنفس الطريقة. وتم حساب الخسائر المتولدة من الماكنتان مثل خسائر جول وبرمنشتهالنك واعادة الاتحاد وخسائر الطاقة الشعاع الخطي مع الزمن. اخيرا وجد ان المنظومة المصممة ( 1.66 × neutron per shot ) توفر ناتج نيتروني اكبر من المنظومة القياسية (5.15 × neutron per shot) . لقد تصرفت المنظومة المصممة مثل المنظومة القياسية لكن كان الاختلاف في سلوك المنظومة المصممة والقياسية هو اختلاف الترتيب الهندسي للمنظومتين من حيث هندسة الاقطاب واختلاف قيم العناصر الكهربائية للدائرة الخارجية. ان المنظومة المصممة نظريا في هذا البحث يمكن ان تكون مشروع لبناء ماكنة بؤرة بلازما تطبيقية للحصول على ناتجها النيتروني العالي للاستفادة منه في اجراء تفاعل الاندماج النووي.

المقاطع العرضية لتفاعلات القنص والجسيمات المشحونة لانتاج نظائر اليود الطبي المشع == Capture and Charged Particles Reactions Cross Sections for Production of Iodine Medical Radioisotopes

اسم المؤلف: رغد سعدون محمد
اسم المشرف: ايمان طارق العلوي
الموضوع العام: علوم الفيزياء
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تعددت الوسائل التي يحاول الاطباء من خلالها الكشف المبكر عن الامراض السرطانية ومن ثم السيطرة عليها قبل ان تتفاقم ويصعب علاجها. ان اخر ما توصل اليه الطب الحديث للحد من انتشار هذه الامراض هو استخدام نظائر المواد المشعة في علاج بعض الامراض وتشخيص البعض الاخر حيث يلعب النشاط الاشعاعي المنبعث من انحلال النظائر المشعة مثل انبعاث الكترونات اوجر والبوزترونات واشعة كاما دورا هاما في التطبيقات الطبية التشخيصية والعلاجية, ان الانوية المشعة ذات الاعمار النصفية الصغيرة (بضع ساعات) تكون ملائمة للحالات التشخيصة وهذا مايسمى التصوير بواسطة الانبعاث البوزتروني (PET) او بقياس طاقة فوتون كاما المنفرد (SPET) حيث تعطي هذه التقنيات صور ثلاثية الابعاد للعضو المراد فحصه, اما الحالات العلاجية فان الاشعة المؤينة المنطلقة لمسافات قصيرة تكون ملائمة لاختراق الانسجة وتغير تركيب الحمض النووي للانسجة المصابة. هذه النظائر يتم انتاجها بواسطة معجلات او مفاعلات نووية خاصة لهذه الاغراض ومن ثم يتم التاكد من نقائها من الشوائب النووية التي تظهر في عملية الانتاج قبل اعطائها للمريض . مما تقدم تم اختيار نظائر اليود المشع (I; A= 119→126, 128, 130, 131) في هذه الدراسة لان معظم نظائره ذات اعمار نصفية ملائمة للحالات العلاجية والتشخيصية. ان الطرق الرئيسية لانتاج اليود هو باستخدام الاهداف , , والتي تضمنت 38 تفاعل مباشر و9 تفاعلات غير مباشرة. وقد تم حساب المقاطع العرضية لتفاعلات (p,γ)و (p,α)و(p,xn) و(d,xn) و(α,xn) لانتاج نظائر اليود المشع حيث تم تقييمها في العمل الحالي اعتمادا على القيم العملية المتوفرة في مكتبة (EXFOR) التابعة لوكالة الطاقة الذرية الدولية (IAEA) حيث احتوت مكتبة (EXFOR) على البيانات العملية للمقاطع العرضية المقاسة لعدة سنوات سابقة ولعدة باحثين حتى الوقت الحالي. ان افضل التفاعلات لانتاج I - 123 هما و, وكذلك افضل التفاعلات لانتاج I - 124 هما و, ولانتاج I - 125 فان افضل تفاعل هو كون هذه التفاعلات تتمتع بانتاج عالي وشوائب قليلة ضمن مدى طاقي قليل. وان افضل تفاعل لانتاج I - 131 هو التفاعل غير المباشر لاهميته باستخدامه في (SPET) لغرض تصوير الغدة الدرقية وكذلك لعلاج سرطان الغدة الدرقية. لقد تم تحليل مديات الطاقة الكاملة لكل تفاعل وقد تم اعادة حساب المقاطع العرضية بفترات صغيرة لطاقة البروتون او الديتريون او جسيمة الفا الساقط بلغت (0.01MeV) مع الاخطاء المرافقة لها. وبذالك تم حساب المقاطع العرضية المختارة لانتاج نظائر اليود المشع وايجاد معادلات الملائمة من نوع Polynomials لعدة مراتب n= 4→10 والتي تربط بين تغير المقطع العرضي مع الطاقة والتي يمكن استخدامها للتنبؤ بقيم المقاطع العرضية غير المحسوبة. لقد تم حساب مستوى الشوائب التي تظهر في عمليات انتاج النظائر التي لها اعلى تطبيقات طبية واختيار افضل منطقة ذات مدى طاقة يتم تحديده باستخدام السايكترون للحد من ظهور الشوائب النووية وتم الحصول على توافق جيد بين النتائج النظرية والنتائج العملية المتوفرة. لقد تم حساب قدرة الايقاف على اساس صيغة زكلر من اجل حساب ناتج (yield) كل تفاعل وحساب سمك الهدف. وقد تم حساب قيمة Q وطاقة العتبة وطاقة الربط والمقاطع العرضية لنظائر اليود المختارة. تم بناء البرامج الحسابية Recom.m وStopp.m وStopd.m وStopa.m وYield.m وImpurity.m في العمل الحالي باستخدام Matlab - 8 اضافة لاستخدام برنامج SRIM (2003) لاجراء الحسابات. | There are many ways in which doctors attempt to early detection of cancer and then control it before it worsen and becomes difficult to treat. The latest findings of modern medicine to reduce the spread of these diseases is the use of isotopes of radioactive Iodine in the treatment of some diseases and diagnosis of others where it plays radioactivity emitted from the dissolution of radioactive isotopes, such as the emission of Auger electrons, positrons and gamma rays which play an important role in medical applications of diagnostic and therapeutic. The half - life of radioactive nuclei with a few hours are appropriate for situations diagnostic and this called imaging by Positron Emission Tomography (PET) or Single Photon Emission Tomography (SPET). These techniques give a three - dimensional picture of the organ to be scan, either cases the therapeutic ionizing radiation emitted over short distances are appropriate to penetrate the tissue and change the structure of DNA of the infected tissue. These principals are produced by accelerators or nuclear reactors, especially for this purpose and then be sure of the purity of nuclear impurities that appear in the production process before giving it to the patient. Isotopes of radioactive Iodine (I; A= 119→126, 128, 130, 131) have been selected in the present work. Since they have suitable half - life that could be used for treatment and diagnostic. The main production routes, use , , targets, including 38 direct reactions and 9 indirect reactions. Exciitation functions for proton, deuteron and alpha particles for the reactions (p,xn), (p,α), (p,γ), (d,xn), (α,xn) (n,p) for the production of isotopes of radioactive Iodine have been evaluated using an experimental of energy of incident particles and cross sections published in the International Atomic Energy Agency (IAEA), especially (EXFOR) library which measured cross sections for different authors and for several years prior to the present. The best reactions for the production of Iodine - 123 are the reaction and reactions, while the best reactions for the production of Iodine - 124 are and reactions. For the production of Iodine - 125, the best reaction is , because it possesses less impurities and low energy ranges and higher yields. While the best indirect reaction for the production of Iodine - 131 is for its importance using in (SPET) for imaging of the thyroid gland and as a therapy by thyroid cancer. The analysis of a complete energy range has been done for each interaction. The cross sections are reproduced in fine steps of incident proton or deuteron or alpha particle energy in 0.01MeV intervals with their corresponding error. Therefore, the selected cross section for the production of radioactive Iodine isotopes have been calculated with a polynomials fitting with a degree n=4→10 that could be used for the prediction of un calculated cross sections. Level of impurities that appear in the isotope production processes that which have the highest medical applications have been calculated. The best area of useful energy range has been chosen by using cyclotron to reduce the appearance of nuclear impurities The stopping power according to Zeigler formulae was used in order to obtain the yield for each reaction and to calculate the target thicknes. Q - value, threshold energy and binding energy for selected Iodine isotopes were also calculated. The programmes of Recom.m, Stopp.m, Stopd.m, Stopa.m, Yield.m and Impurity.m, have been built in the present work using Matlab - 8 to calculate the results of the present work, as well as SRIM (2003) program were used

تحضير تراكيب نانوية للزنك اوكسيد بطريقه السول - جيل

اسم المؤلف: تغريد سعدون محسن
اسم المشرف: رعد سعدون صبري | محمد جاسم محمد حسن
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا البحث دراسة الخصائص التركيبية ,البصرية ,الكهربائية والتحسسية للاغشية (ZnO) النقية والمشوبة بالسيريوم (Ce) بالنسب % (3,5,10) المحضرة بطريقة السول - جيل, والتي رسبت بطريقه السبن كوتنك على قواعد زجاجية وملدنه عند درجات الحراره (350,500,550˚C) للاغشيه النقيه و(˚C550 ) للاغشيه المشوبه وبسمك (315.5)nm.بينت فحوصات نمط الحيود للاشعة السينية (XRD) لتشخيص طبيعة تبلور الاغشية المحضرة, حيث اظهرت النتائج ان جميع الاغشية المحضرة ذات تركيب متعدد التبلور من نوع سداسي hexagonal)), كما تبين من نتائج التشويب ان زيادة التشويب تؤدي الى النقصان في الحجم الحبيبي حيث تناقص الحجم الحبيبي من (37.1) الى (27.0) في حالة التشويب بنسبة ,10%, ومن خلال قياسات ماسح القوة الذرية AFM تبين ان خشونه السطح تزداد بزياده نسب التشويب من القيمه (1.14) الى القيمه 2.15)) عند النسبه 10 % ,ومن قياسات المجهرالالكتروني الماسح SEM تم التعرف على نوع التراكيب ففي الاغشيه النقيه ظهرت التراكيب ذات جسيمات نانويه كرويه الشكل موزعه بصوره منتظمة ومتجانسة ,بينما الاغشيه المشوبه كانت التراكيب الناتجه شبيه بالالياف وعلى شكل شبكه تجاعيد (متغصن ). وقد تم دراسة الخواص البصرية لاغشية اوكسيد الزنك النقية (ZnO) والمشوبة بالسيريوم (ZnO : Ce) على دراسة طيف النفاذيه (T᷊) لاغشية المحضرة حيث بينت النتائج ان اعلى نفاذيه تم الحصول عليها هي(95%) عند الاغشية النقيه بينما كانت النفاذيه للاغشية المشوبة %(65 - 40) ولمدى اطوال موجيه350 - 900) nm.) , وتبين ايضا ان الامتصاصية بشكل عام تزداد بزيادة نسب التشويب لتصل اعلى قيمة عند النسبه10% بزيادة نسبة التشويب. تم حساب فجوات الطاقة البصرية للاغشية النقيه والمشوبه وتبين ان فجوة الطاقة تزداد قليل بزيادة نسبة التشويب الى ان تصل الى اعلى قيمة عند نسبة التشويب (10%). وكانت فجوة الطاقة ( (Eg تتراوح من (3.219 eV) الى (3.232eV) بزيادة نسب التشويب. اظهرت القياسات الكهربائية ان التوصيلية الكهربائية المستمرة تزداد بزيادة نسبة التشويب ثم تقل عند النسبه 10 % مع زيادة نسبة التشويب . وبينت القياسات ان الاغشية كافة تمتلك طاقتين للتنشيط (Ea1) و(Ea2) تقل قيمتهما بزيادة نسبة التشويب. كما بينت خصائص(photoconductivity) ان الاغشيه تمتلك ربحيه مقدارها (2.357) للاغشيه النقيه و(1,1.666,1)للاغشيه المشوبه عند النسب (3,5,10 )%على التوالي . اما خصائص التحسسية لجميع الاغشية المحضره كانت تقاس بعد تعريضها الى ( (100,150,200 ppm) من ال( NH₃و( NO₂ عند درجه حراره الغرفه . النتائج العملية بينت ان اغشية اوكسيد الزنك المشوبة بالسيريوم والمرسبة على قواعد زجاجية تحسن التحسسية لتلك الاغشية للغاز ( NH₃و ( NO₂ كما تبين ان افضل نتيجة سجلت كانت للاغشية المشوبة بنسبة 10 % حيث كانت (17%) للغاز NO₂ و(16.66%)للغاز NH₃عند 300 درجه مئويه في حين كانت افضل نتيجه للاغشيه المشوبه بنسبه (%3 و%5) حيث كانت (12.6 %) للغازNO₂ و(10.31%) للغاز ,NH₃ 14%)) للغاز NO₂ و(13.28 %) للغاز NH₃ على التوالي عند 200 درجه مئويه . بالاضافة الى ذلك تبين ان التحسسية لها علاقة نسبية لدرجات الحرارة وكمية الغاز. | In the present work, structural, optical, electrical and sensing properties have been studied for undoped and Ce doped zinc oxide (ZnO) thin films with different cerium doping concentrations (3 ,5 and 10) % prepared by a Sol - gel method with spin coating , deposited on glass substrate at annealing temperature (350,500 and 550 )˚C for the pure thin film , 550 ˚C for doped thin film with (350±10) nm thickness, The X - ray diffraction technique has showed that all prepared films are polycrystalline structure type of hexagonal wurtzite, The doping resulted in decreasing grain size deteriorates the crystalline of the films from (37.1nm) of pure ZnO to (27nm) of ZnO : Ce at (10 %) doped. Surface analysis by AFM have been, the roughness increased with increasing the cerium concentration in the films from (1.14) to (2.15) at 10 % , From FE - SEM have been identified the structures in the thin film pure, spherical nanoparticles distributed a regular basis and homogeneous, while doped thin film were shapes like fiber and a wrinkle network. The measurements of optical properties transmittance of undoped and Ce doped ZnO films showed higher transmittance was (95%) for undoped ZnO films while (65 - 40% ) for doped Ce films within wavelength range (350 - 900nm). In addition, the results have showed the absorbance increased with increased doping to reach maximum value at 10% concentration. The energy gap of ZnO was calculated for undoped and doped films .It is noticed that the energy gap increases slowly with the increased of doping until it reaches the highest value at 10% doping concentration , and the energy gap ranging from (3.219) to (3.232) with increased doping concentration.The results of electrical properties have showed that direct current (D.C) conductivity increases then decreases by increasing doping to reach maximum value at 10% doping concentration. The results have showed that the films have two activation energy Ea₁ and Ea₂. From (photoconductivity) characteristics it has found that the gain factor (2.357) for pure ZnO and (1, 1.666, 1) for ZnO : Ce at (3, 5 and 10) % Respectively.The sensing properties for all undoped and Ce doped films were measured after films surface was exposed to (100,150 and 200) ppm for NH₃, NO₂ gas at room temperature. The experimental results of Ce doping of zinc oxide thin films with different cerium doping concentrations (3,5 and 10) % which deposited on glass substrate ,sensitivity of thin film sensor elements was investigated in this work. Therefore that the sensitivity of all the samples increases with the increasing in the operating temperature, reaching a maximum value corresponding to an optimum operating temperature which is 300°C for sample (10 %) and 200 °C for samples (3 % ,5 %). In addition ,the sensitivity is directly proportional with the operation temperature for limited range. In general , the sensitivity increases by increasing the concentration of NH₃, NO₂ with increasing temperature degree.

دراسة تطور الجسيمات داخل الغلاف الجوي باستخدام نظام المحاكاة AIRES == Studying of Air Shower Development by AIRES Simulation System

اسم المؤلف: احمد جمعة حبيب سالم الطائي
اسم المشرف: احمد عزيز الربيعي | بتول درعم بلاوة
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تمثل دراسة الاشعة الكونية ذات الطاقات العالية احد اكثر المواضيع تحديا في مجال الفيزياء الفلكية. اذ ان تفاعل الجسيمات الاولية مع نوى ذرات الهواء داخل الغلاف الجوي الارضي تنتج كم هائل من الجسيمات الجوية. في هذا العمل تم اجراء المحاكاة لوابل من الجسيمات الجوية المشحونة (EAS) من خلال التحقق من معاملات التطور الطولي ( عدد الجسيمات المشحونة N واكبرعمق في الغلاف الجوي الارضي Xmax) باستخدام نظام محاكاة لجسيمات الهواء الذي يدعى يرنامج AIRES عند مدى الطاقة (1014 - 1019) الكترون فولت للجسيمات الاولية مثل (الالكترونات, البوزيترونات, البروتونات, جسيمات كاما, نوى ذرات الحديد) وزوايا السقوط (0o, 10o, 30o). ان محاكاة دالة التوزيع الجانبية (LDF) لوابل من الجسيمات الجوية تم اجراؤها باستخدام برنامج AIRES لطاقات اولية مختلفة, جسيمات اولية مختلفة وزوايا سقوط مختلفة. هذه المحاكاة يمكن ان تستعمل لاعادة بناء نوع وطاقة الجسيم المتولد من وابل من الجسيمات الجوية المشحونة والتي سجلت في منظومات عملية متعددة. لقد تم استخدام نموذج هتلر (Hitler's model) في حساب عدد الجسيمات المشحونة واعلى عمق جوي للتطور الطولي في الغلاف الجوي الارضي لعدد من الجسيمات الاولية المشحونة مثل (الميونات, البايونات, الالكترونات, البرتونات, الفوتونات ونوى ذرات الحديد) عند مدى الطاقة المذكوراعلاه الكترون فولت وزوايا السقوط المذكورة اعلاه . ان حساب دالة التوزيع الجانبية تمت باستخدام صيغةNishimura - Kamata Gresien (NGK)) ) ضمن مدى الطاقة المذكوراعلاه وزوايا سقوط مختلفة (0o, 10o, 30o, 40o, 50o, 60o). ولقد تم برمجة هذه الصيغ بلغة فورتران 90 وباستخدام Compaq Visual Fortran (CVF 6.6) ]لاحظ الملحق [A. وتمت المقارنة بين محاكاة التطور الطولي (N and Xmax) باستخدام نموذج SIBYLL الهادروني مع نموذجين هادرونيين مثل.(QGSJET99 and SIBYLL16) وقد اظهرت هذه المقارنة فرصة جيدة لتحديد سلسلة تفاعلات الاشعة الكونية مع نوى ذرات الهواء في الغلاف الجوي الارضي. ان المقارنة بين نتائج الحسابات النظرية ووالنتائج التجريبية لعدد الجسيمات المشحونة واكبر عمق في الغلاف الجوي للجسيمات الاولية مثل (البروتونات ونوى ذرات الحديد) قد اعطت نتائج جيدة ضمن مدى الطاقات العالية المذكور اعلاه. | The study of high energy cosmic rays represents one of the most challenging in the astroparticle physics fields. The interaction of primary particles with atmospheric nuclei produces huge Extensive Air Showers (EAS). In this work the simulation of EAS is performed by investigating the longitudinal development parameters (number of charged particles N and depth of shower maximum Xmax) using a system of air shower simulation which is called AIRES code at the energy range (1014 - 1019eV) for different primary particles like (electrons, positrons, protons, gamma particles and iron nuclei) and different zenith angles (0o, 10o and 30o). The simulation of the lateral distribution function in EAS is performed using AIRES code for different primary energies, different primary particles and different zenith angles. This simulation can be used to reconstruct the type and energy of the primary particles that generated EAS for charged particles that registered with different EAS arrays. Using Hitler's model the estimation of the number of charged particles and depth of shower maximum of longitudinal development in EAS is performed for different primary particles such us (muons, pions, electrons, protons, photons and iron nuclei) at the same energy range and for the zenith angles mentioned above. The calculation of the lateral distribution function of charged particles is fulfilled using Nishimura Kamata Greisen (NKG) formula in the same energy range above and different zenith angles (0o,10o,30o,400,50o and 60o). These formulas have been programmed by Fortran 90 with the aid of Compaq Visual Fortran (CVF 6.6)(see Appendix A). The comparison between the simulated longitudinal development of the number of charged particles and depth of shower maximum using SIBYLL hadronic model with two hadronic models like (QGSJET99 and SIBYLL16) has shown an opportunity for determination of cosmic ray cascade interactions in EAS. The comparison between the theoretical and experimental data of the number of charged particles and depth of shower maximum for primary particles like (protons and iron nuclei) in EAS gave a good agreement within the energy range mentioned above.
1 ... 49 50 51 52 53 ... 202