عرض: 25 50 75 100 النتائج

نتائج البحث: 25 من أصل 2,905

تحضير متراكبات باريوم تيتانيت النانوي BaTiO3 ودراسة بعض خصائصها العزلية == Preparation of Barium Titante (BaTiO3) Nano - Composites and Studyingits some structural and dielectrical properties for

اسم المؤلف: هالة حسين علي قاسم
اسم المشرف: فاروق ابراهيم حسين
الموضوع العام: علوم الفيزياء
السنة: 2017
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

دراسة الخصائص الفيزيائية لاغشية TiO2النانويه المحضرة بطريقة الـ Sol - Gel == Studying The Physical Properties of TiO2 nano films preparing by Sol - Gel Method

اسم المؤلف: عدنان مصحب مهدي
اسم المشرف: عباس فاضل المعموري | بشرى رزوقي مهد
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الاغشية الرقيقة
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: واسط
الصفحات الاولى:

تحضير ودراسة خواص الفصل لطور ثابت جديد لتقنية HPLC == PREPARATION AND CHARACTERIZATION OF NEW HPLC STATIONARY PHASE

اسم المؤلف: هاجر سعد نجم
اسم المشرف: شهباز احمد مكي
الموضوع العام: علوم الفيزياء
السنة: 2011
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: prepared by the reaction of congo red solution with amberlite anion exchange.SUMMaRYThe F.T.I.R elemental analyses have configured the attachment of congo red on the resin as has indicated by the physical appearance of the new resin.The resin capacities of newly prepared resin has calculated the resin capacity for the amberlite - congo red resin was found to average 7.36 meq/ gm and for the amberlite resin 3.0 meq./gm.The new stationary phase has been packed into stainless steel column. This has been done by the special technique. The chromatographic performance of the packed column was characterized the number of plate numbers, height equivalent of a theoretical plates(HETP) capacity factors, selectivity factor and peak asymmetry were measured by analyzing different analysis on the new column using different mobile phases composition and flow rates. The parameters were measured from analysis of some amino acids such as phenyl alanine, tyrosine and tryptophan. The analysis of amino acids using amberlite - congo red column has performed with an aqueous mobile phase adjusted at pH 10. The average number of plates, N was(111.09 - 284.3) . The plate height H was (0.01343) cm, capacity factor, ḱ were ranged from(3.5 - 3.76). and peak asymmetry value was1.06. The analysis of some amino acid of the some column but with a mobile phase adjusted at pH 10 with 20% aceto nitrile, the chromatographic parameters were plate’s number, N was(176.3307). plate height H was(0.128) cm, capacity factor Ќ were ranged from(2.98 - 4.65).

تاثير اضافة مادة البايركس على بعض الخصائص الفيزيائية لمادة البورسيلن == Influence of Pyrex Addition on Some Physical Properties of Porcelain Material

اسم المؤلف: عمر عدنان جاسم
اسم المشرف: كريم علي جاسم | سوسن عبد الحسين مهدي
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: This study was carried out to prepare a porcelain samples of raw material 50 wt % kaolin dukhla, 25 wt % erzma sand glass and 25 wt% feldspar, boro silicate glass (Pyrex) used as a flux in the porcelain (ceramic) body, instead of feldspar, yielding a new material which has new properties with grain size equal to 53μ.Pyrex which was added to the porcelain to get the mixtures of sample. The all mixtures prepared and 10 wt % of distilled water was added, the resulting blends were die pressed of 25 MPa, to produce specimens with diameter of 25 mm and thickness of 5 mm, then they were dried and sintered for different temperatures (1200, 1250, and 1300) C° for 1 hour in an electric furnace. Physical properties measurements such as density, porosity, water absorption and length shrinkage percentage, were carried out, also mechanical properties (compression strength) and thermal properties. (Thermal conductivity and heat capacity) were measured The result of the physical properties measurement are found to be improved at increasing the ratio of Pyrex mixture, such as increase in density and shrinkage which a company with the decrease of porosity and water absorption, also the same changes were happened for these properties with increasing sintering temperature for all mixtures, and the highest increment in shrinkage have been shown at 1250 C°.The thermal conductivity and heat capacity have increased the ratio of Pyrex mixture, and there are small increment in these measurements, at increasing temperature for mixtures 3 and 4, but the increment is high for mixture no. (2).The results of mechanical properties measurements (diametrical strength) are found to be improved and increased at the increase of the ratio of Pyrex mixture and the mixture no. (3) have a highest strength. Also this improvement and increment in strength was continued for mixtures 2 and 3, with the increase of the sintering temperature whereas decreases for mixture (4) improvement in physical and mechanical properties for a new porcelain make suit usage in brick walls industry (porcelain tiles).

تاثير اضافة Al2O على الخصائص الكهربائية للفارستور من نوع ZnO == The Effect of (Al2O3) Additive on Electrical Properties of (ZnO) - Based Varistor

اسم المؤلف: عباس فاضل شنون
اسم المشرف: ايسر جمعة ابراهيم
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ZnO based varistor samples having composition formela as shown below : - (X) is a variable take values (X = 0 , 0.1 , 0.5 , 1) % mol were prepared by a solid state reaction and sintered in air at a different sintering temperatures (1000,1100 and 1200)ᴼC for 2h by a heating rate of (5ᴼC. min - 1). The microstructure and electrical properties of sintered samples were investigated by using X - ray diffraction (XRD), energy dispersive spectroscopy (EDX), scanning electron microscopy (SEM), as well as electrical meas urements. XRD analyses showed that the crystallite size was decreased with the increase of Al2O3 concentration while it was increased with the increase of sintering temperature. Also from SEM images and by using linear intercept method we note that the grain size decreases with the increase of Al2O3 concentration while it increases with the increase of sintering temperature. Since the breakdown voltage is influenced by the size and the number of grains , so it was increased with the increase of Al2O3 concentration at certain sintering temperature to reach (2220V) at sample contains (1% of Al2O3) and sintered at 1000ᴼC for 2h, this is due to form a spinal phase (ZnAl2O4) which inhibits the grain growth.Also the breakdown voltage was decreased with the increase of sintering temperature at certain Al2O3 concentration to reach (255V) at sample sintered at 1200ᴼC for 2h and contains (0.1% l of Al2O3).By plotting the (J - E) curves of varistor samples we can notes that the adding of (0.1 and 0.5) % of Al2O3 dopants enhances the nonlinear behavior of ZnO varistor by increasing the nonlinear coefficient to reach its maximum values (46, 48) respectively which are sintered at 1000ᴼC for 2h, while the increase of Al2O3 concentration to(1% ) decreases the nonlinear coefficient to (29.2) which are sintered at 1000ᴼC for 2h .Compound ZnO Bi2O3 Sb2O3 CoO MnO2 Cr2O3 Al2O3 % mol 96.5 - X 0.7 1 0.8 0.5 0.5 X The increase of sintering temperature decreases the nonlinear coefficient to reach its minimum values (6.9, 8) at samples sintered at 1200ᴼC for 2h and contain a different amounts of Al2O3 concentration, this is due to the bad volatilization of bismuth that insured by (EDX) test.The leakage current was increased with the increase of both Al2O3 concentration and sintering temperature to reach its maximum value (0.33mA) at a sample which contains (1% ) of Al2O3 concentration and sintered at 1200ᴼC for 2h, that is because the Aluminum increases the free electrons (donor density ) at the conduction band.Deilectric constant decreases with the increase of the frequancy of the applied voltage for the samples which containe 0.1% of Al2O3 and sintered at (1000 and 1200)ᴼC for 2h and for the sample contain 1% of Al2O3 and sintered at 1000ᴼC, the deilectric constant decreases with the increase of sintering temperature while tangent factor increases with the increase of Al2O3 concentration, this is due to the increase of leakage current.

دراسة بعض التاثيرات اللاخطية في ليزرات الالياف == Studying Some of the Nonlinear Effects in Fiber Laser

اسم المؤلف: يونس محمد عطية الزاهي
اسم المشرف: قيس عبد الستار النعيمي | علي عبد داود الزكي
الموضوع العام: علوم الفيزياء
السنة: 2006
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: وضع نموذج رياضي لوصف تفاعل المجال الكهرومغناطيسي مع الايونات المشوبة لقلب الليف البصري باستخدام ميكانيك الكم. الموجات السلتونية(soliton wave ) الناتجة عن هذا التفاعل تكون ضمن مدى النبضات عالية القصر (ps )والليف المستخدم في دراستنا هو ليف الايربيوم( ( Er+3. الموجات السوليتونية تتشكل نتيجة التفاعل بين تشتت سرع المجموعة (GVD)واللاخطية .اشتقت معادلة شرودنكر اللاخطية لانتقال النبضة الليزرية داخل ليزرات الالياف ذي النمط المنفرد وعملية التكبير للنبضة الليزرية يمكن وصفها بواسطة معادلة شرودنكر اللاخطية والتي تضم تشبع الكسب والتشتت الليفي واللاخطية لليف كما وضع الباحث توضيح لعملية قفل النمط باستخدام تقنية التشبع بالامتصاص (SA mode - locking technique) وباستعمال هذه التقنية وضعت دراسة نظرية لتوليد السلتون باستعمال المرنان الحلقي.ثم استعمل حل يضم ( (Chirpingللحصول على الشروط اللازمة لتوليد السلتون الليزري داخل ليزرات الالياف مع تغير الطور الذاتي وقد تبين ان السلتون يستقر بعد 30 دورة بالنسبة الى قيم التشتت( (dispersion واللاخطية ((nonlinearity والكسب المستخدمة في هذه الدراسة. ومن التاثيرات اللاخطية التي درست هي تغير الطور الناتج عن تفاعل مجال نبضتين خلال انتقالهم في ليزرات الالياف (,(XPMاجرينا حلا لمعادلتين مرتبطة لا خطية تضم تغير الطور الذاتي وتشتت سرع المجموعةوتشتت الكسب والفرق الزمني بين السلتونين الذي يعد مهما جدا لمعرفة مسافة التفاعل بين السلتونين. قمنا بدرا سة تحليليه للتفاعل بين السلتونين حيث بينت النتائج عدم حصول تفاعل عندما تكون الفاصلة الزمنية بين السلتونين =4ps J خلال ال30 دورة.اللااستقرارية في ليزرات الالياف تم دراستها من خلال فحص مدى استقرارية الحل لاي اضطراب, اللاستقرارية تؤدي الى توليد نبضات اضافية على جانبي النبضة الرئيسية عند عملية تكبير النبضة.نتائجنا بينت ان الموجة المستمرة سوف تتحول الى نبضات عالية الشدة تعيد نفسها عند تردد يعتمد على تشتت الكسب واللاخطية.عند استعمال القدرات العالية في ليزرات الالياف فان الاستجابة الخطية سوف يقل تاثيرها على النبضة الليزرية.والتاثيرات اللاخطية سوف تظهر واحدى هذه التاثيرات ناتجة بسبب التاثرية الكهربائية من الرتبة الثالثة وتحدث عند استخدام قدرتين للضخ في الليف الليزري في هذا الجزء من الدراسة نلاحظ كيف ان الطاقة تنتقل من قدرات الضخ العالية الى موجة الاشارة. نتائجنا بينت ان استجابة الكسب تعتمد على قدرة الضخ وعلى محصلة الطور والكسب يزداد بزيادة اللاخطية ويصبح اعظم ما يمكن عند تساوي محصلة الطور الخطي ومحصلة الطور اللاخطي. | In our model, the electromagnetic field and the dopant atoms are described quantum mechanically. The resulting solitary waves take the form of ultra short (picoseconds) laser pulses which propagate through fiber doped with rare earth atoms such as Erbium; solitary wave formation involves the combined effects of group velocity dispersion (GVD), nonlinearity and resonant interaction with dopant atoms .We drive the nonlinear Schrödinger wave equation(NLSE)for single mode optical fiber laser. Pulse amplification is governed by a (NLSE) that includes gain saturation, gain dispersion, fiber dispersion, fiber nonlinearity and the detuning effects occurring when the carrier frequency of the input pulse does not coincide with gain peak.We present theoretical study of Saturable Absorption mode locking technique with self phase modulation (SPM) in a unidirectional ring cavity. The pulse propagation in fiber laser requires chirping, our results show the conditions which the fiber laser require to produce soliton pulses. The stability of the soliton takes place after 30 loops. The effect of cross phase modulation (XPM)on the evolution of co propagating ultra short pulses in an optical fiber laser is discussed theoretically by solving the coupled nonlinear Schrödinger equations which include the contribution of self phase modulation ,cross phase modulation ,group velocity dispersion and gain dispersion .The separation time between two neighboring solitons is important to determine how close two solitons can come without affecting each other .Interaction between two solitons has been studied analytically .Our result shows the initial separation time J=4 ps between two solitons is necessary to avoid soliton interaction for30 loops. The modulation instability in erbium doped fiber laser is studied through a stability analysis of the underlying nonlinear Schrödinger equation .Modulation instability generates multiple pulses when a single pulse is amplified .It can also create multiple sub pulses in mode locked fiber lasers Our results show continuous wave optical signal converted into a train of high repetition rate depend on the gain dispersion and nonlinearity. When a high power optical signal is launched into a fiber laser the linearity of the optical response is lost. One such nonlinearity effect, which is due to the third order electrical susceptibility is called four wave mixing (FWM) and occurs when two pump powers is lunched into a fiber laser. This work notes how to transfer energy from a strong pump wave to signal wave, our result shows the gain responsible (parametric gain) depends on the pump power and net phase mismatch and it is increasing with increasing the nonlinearity and the gain becomes maximum when the linear mismatching is equal to the nonlinear mismatching

دراسة نظريه للاستطارة الالكترونيت للنوى 59Co, 61Ni, 63Cu , 65Cu == Theoretical Study of Electron scattering from 59Co, 61Ni, 63Cu and 65Cu nuclei

اسم المؤلف: ياسمين حسن كاظم
اسم المشرف: الطاف عبد المجيد الرحماني
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: فيزياء الالكترونيات
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The nucleon momentum distributions NMD and the elastic longitudinal form factors F(q) for the electron scattering of the ground state for some odd mass nuclei in the 1f - 2p shell, such as 59Co, 61Ni, 63Cu and 65Cu have been derived and calculated by using the Coherent Density Fluctuation Model CDFM and expressed in terms of the fluctuation function (weight function)| . The fluctuation function has been related to the nucleon density distributions NDD of the nuclei and determined from the theoretical and the experimental results. The property of the long - tail manner at the high momentum region of the nucleon momentum distributions has been obtained by both the theoretical and experimental fluctuation functions on contrary to the results of the nucleon momentum distributions derived and calculated in the shell model by taking Fourier transform to the harmonic - oscillator wave functions that are mainly characterized by the steep slope behavior at high momentum values. The experimental form factors of all nuclei under study are in reasonable reproduced by the present calculations for all the values of momentum transfer .

دراسة تاثير المذيب والحامضية على شدة الفلورة وعلى الخواص الطيفية لمحاليل الفلورسين == Study the Effect of Solvent and pH on the Fluorescence Intensity and Spectral Properties of Fluorescein Solutions

اسم المؤلف: وليد خالد حمود
اسم المشرف: وليد صلاح عبد الوهاب
الموضوع العام: علوم الفيزياء
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم دراسة وقياس اطياف الامتصاص والتهيج والفلورة لمركب (الفلورسين) المذاب في المذيبات القطبية ( الايثانول, الميثانول ,الاسيتون ترايل ,الدايمثيل فورماميد ,الدايمثيل سلفوكسيد)عند الطول الموجي المهيج ((λex=480nm وبدرجة حرارة الغرفة .حيث تــم دراســـــة تاثير قطبيــــة المذيبات اعلاه على شــــدة طيــــــف الفلورة عند التركيزين (10 - 4 مول/ لتر) و(10 - 5 مول / لتر) فقد وجد ان شدة طيف الفلورة تقل مع زيادة قطبية المذيب وكذلك وجود ازاحة لقمة طيف الفلورة باتجاه الطول لموجي الطويل (ازاحة حمراء ) بينما الشدة تزداد عند التراكيز المخففة (لنفس المذيب) مع الزيادة في قيمة ال(pH) ما عدا الايثانول بسبب تقارب قيمة ال (pH) مع تغير التركيز.وكذلك تم دراسة الخواص الطيفية لمحاليل الفلورسين ومنها الكفاءة الكمية التي تم حسابها.كما تــم دراســـة تاثير pHعلــى شـــــدة طيــف الفلورة عنـد التركيزين (10 - 4 مول/ لتر) و(10 - 5 مول / لتر) فقد لوحظ عند اضافة القاعدة (NaOH ) او الحامض (HCl)عند التركيز(10 - 4 مول/ لتر) بان شدة طيف الفلورة تزداد ثم تنخفض تدريجيا(عدا الاسيتون ترايل) وان هناك ازاحة لطيف الفلورة نحو الطول الموجي الطويل (ازاحة حمراء) تثبت تريجيا عند قيمة معينة . اما عند التركيز(10 - 5 مول / لتر) فقد لوحظ بان شدة طيف الفلورة تزداد تدريجيا مع زيادة قيمة الpH بعد اضافة القاعدة (NaOH) مع وجود ازاحة لطيف الفلورة نحو الطول الموجي الطويل (ازاحة حمراء). وقد تم حساب الكفاءة الكمية لكل قيم pH المحسوبة.ان انخفاض الشدة لطيف الفلورة قبل وبعد اضافة الحامض او القاعدة هو بسبب تاثير قطبية المذيب وبسبب تاثير قيمة pH ووجود صيغ الفلورسين السائدة (dianion) او(monoanion) في المحاليل التي تلعب دورا كبيرا في شدة طيف الفلورة وقيمة الكفاءة الكمية | The absorption ,excitation and fluorescence spectra for fluorescein compound which dissolves in polar solvents (methanol, ethanol, acetonitrile , dimethylformamide and dimethyl sulfoxide) at excitation wavelength (λex= 480 nm) at room temperature were measured and investigated. Studying the effect of above solvent on the fluorescence intensity with the concentrations[1x10 - 4M], [1x10 - 5M], and it has been found that the fluorescence intensity decreases with increasing polarity of solvent. Also, it is found that the fluorescence spectra was shifted toward the long wavelength (red shift ) while it is observed that the fluorescence intensity was increased at diluted concentrations (for the same solvent) with increasing pH values except at (ethanol) because of the convergence of the value (pH) with the change of concentration. Also, studied the spectral properties of the solutions (fluorescein) including quantum efficiency were calculated . Studying the effect of pH on fluorescence intensity at concentrations [1x10 - 4M],[1x10 - 5M], had been observed when adding the basic (NaOH) or acid (HCl) at concentration [1x10 - 4M]. The relative fluorescence intensity increases and then decreases gradually (except Acetonitrile) , and there is the fluorescence spectra which are more shifted toward the longer wavelength (red shift) fixed gradually at limited value. While at the concentration [1x10 - 5M] , it had been observed that the intensity of fluorescence spectrum is gradually increasing with the increase in the value of the pH after the addition of the base (NaOH) , with the shifted toward the longer wavelength (red shift), and the quantum efficiency was calculated for each pH values. The decreasing intensity of the fluorescence spectrum before and after the addition of the acid or the base due to the effect of the solvent polarity and the effect of pH value ,it is found (dianion) or (monoanion) form has been found prevailing in solutions which play a major role in the intensity of fluorescence spectrum efficiency and value of quantity

السليكون العشوائي للثنائي الباعث للضوء من النقاط الكميه == Amorphous silicon Light Emitting Diode Quantum Dots

اسم المؤلف: ولاء خليل جميل خليل
اسم المشرف: موفق كاظم عبد الرضا
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الدراسة استخدمت الحسابات النظرية لنبيطة ثنائي الباعث للضوء للنقاط الكميه من السيليكون العشوائي. وعن طريق هذه الحسابات فقد تبنينا فكرة التقيد الكمي. وقد وجد ان الانبعاث الكمي الضوئي يظهر اعتمادا مهما لحجم النقاط الكمية والتي تتراوح من (١ - ٤) نانومتر. ان الكفاءة الكمية الداخلية تتاثر بدرجة الحرارة حيث تكون اكثر كفاءة عند درجة حرارة الغرفة. يمكن لفجوة الطاقة ان تتناغم وفقا للتحكم بحجم النقاط الكمية من السليكون العشوائي. وقد اظهرت النتائج الازاحة نحو الطاقا العاليه في تاثير حالة التقييد الكمي, لهيكل النقاط الكمية للسيليكون العشوائي. وهذا التقييد الكمي يجعل السليكون مرشح للعرض بكامل الوان الطيف البصري. مما يقودنا هذا السلوك البصري الى تفسير تغير مادة النقاط الكمية للسيليكون العشوائي لتصبح مادة ذات فجوة حزمية مباشرة بعد ان كانت غير مباشرة في طبيعتها الحجمية. تمت دراسة الكفاءة الكمية الداخلية بوصفها دالة الى الطول الموجي وتيار الحقن. لقد وجدنا ان النتائج المستحصلة متفقه اتفاقا جيدا مع النتائج التجريبية المنشورة. لذا, فاننا نؤكد على ان مادة النقاط الكمية من السليكون العشوائي هي خيار واعد لنبائط انبعاث الضوء المرئي والقابلة للتناغم الطاقي وذات انجازية عاليه | In this work, theoretical calculations were used by considering the amorphous silicon quantum dots light emitting diode (a - SiQDs LED) as the device of investigation. By these calculations, the effect of quantum confinement was a doped. It is found that the light emission shows significant size dependence in the range (1 - 4) nm of the quantum dots. The internal quantum efficiency is affected by temperature and it is more efficient at room temperature. The energy gap can be tuned by controlling the size of a - SiQDs. The blue shift is attributed to quantum confinement effect in a - SiQDs structure, where quantum confinements make silicon like candidate for full - color display. It led to the interpretation that the a - SiQDs material has been changed to be a direct band gap material. Internal quantum efficiency as a function of wavelength and injection current has been studied. It is found that the obtained results are in good agreement with the experimental published data. Therefore, a - SiQDs material was asserted to be a promising candidate for visible, tunable and high performance light emitting devices.

تحضير ودراسة خواص الخلية الشمسية المفعلة بالصبغه بطريقة الترسيب بالليزر النبضي == Preparation and Characteristics Study of Dye Synthesized Solar Cell by Pulsed Laser Deposition

اسم المؤلف: وسن جبار طاهر
اسم المشرف: سمر يونس الدباغ | سؤدد سلمان احمد
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: دكتوراه
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: هذا العمل يركز على تصنيع الخلايا الشمسية المفعلة بالصبغه باستخدام مادة شبه موصله من نوع P بدل من استخدام السائل لغرض معالجة بعض المشاكل منها معالجة التسرب في السائل المستخدم. الى جانب ذلك، فقد تم دراسة وتحضير المواد النانوية التي تلعب دورا هاما في اداء هذا النوع من الخلايا الشمسية, حيث ان هذه المواد القابليه على تحقيق كفاءة تحويل عالية مع الحفاظ على البساطة والكلفة المنخفضة. تتكون الخليه الشمسيه من (ITO/ TiO2 or ZnO /Ru /CuI/ Ag) حيث تم ترسيب المواد النانويه المستخدمه في هذا العمل بواسطة استخدام تقنية الترسيب بالليزر النبضي. واجريت الفحوصات التركيبيه والبصرية والكهربائية لجميع المواد النانويه المستخدمه في تحضير الخليه الشمسيه وكذلك دراسة تاثير عدد نبضات الليزر نيديميوم, التلدين وكفاءة الخليه الشمسيه : - تم فحص اغشية اوكسيد التيتانيوم واوكسيد الزنك النانويه بواسطة حيود الاشعه السينية (XRD) وجد ان تركيبها يتغير من العشوائي الى متعدد التبلور عند التلدين بدرجة حرارة o C450 . اما اغشية ايوديد النحاس فكانت متعددة التبلور بدرجة حرارة الغرفه.اظهرت دراسة طبوغرافية السطح لجميع الاغشية المحضرة بان حجم الحبيبات يزداد وكذلك خشونة السطح تزداد بزيادة عدد نبضات الليزر المسلطه وكذلك زيادة درجة الحرارة.من خلال فحص الخصائص البصريه لجميع الاغشية المحضره وجد ان الامتصاصية تزداد بزيادة عدد نبضات الليزر وكذالك عند زيادة درجة الحرارة.قياسات هول اثبتت ان اغشية اكسيد التيتانيوم واكسيد الزنك هي من نوع n - type بينما اغشية ايوديد النحاس فهي من نوع p - type . تم ملاحظة ان كثافة حاملات الشحنه تزداد وتحركيه هول تقل بوضوح مع زيادة عدد نبضات الليزر.تم تصنيع القطب الضوئي للخلايا الشمسيه المفعلة بالصبغه من مادة اوكسيد التيتانيوم واوكسيد الزنك النانويه, حيث لوحظ في حالة وجود اوكسيد التيتانيوم او اكسيد الزنك فان القطب الضوئي يعتمد على زيادة عدد النبضات وبالتالي اعتماد كفاءة الخليه الشمسية على عدد النبضات بسبب زيادة السمك, حيث لوحظ عندما كان عدد النبضات المسلطة 200 نبضه فان كفاءة الخليه الشمسيه كانت %2.115) ) وعندمزااد عدد النبضات الى 800 نبضه زادت كذالك كفاءة الخليه الشمسيه الى ( 5.654%) . ان مادة اوكسيد التيتانيوم هي افضل من اوكسيد الزنك حيث كانت كفاءة الخليه في حالة استخدام مادة التيتانيوم اعلى من كفاءة الخليه في حالة استخدام مادة اوكسيد الزنك حيث لوحظ عند استخدام 800 نبضه بلغت كفاءة الخلية الشمسية الى 5.654% في حالة استخدام مادة اوكسيد التيتانيوم ولكن انخفضت الكفاءة الى 4.231% عند استخدام مادة اوكسيد الزنك. وايضا تم وضع مادة ايوديد النحاس مع اوكسيد التيتانيوم ومع اوكسيد الزنك وكان اوكسيد التيتانيوم افضل من اوكسيد لزنك نتيجة لزيادة الكفاءة. | In a solid state dye - sensitized solar cell the electrolyte is replaced by a p - type semiconductor avoiding problems of leakage of liquid electrolytes. During this work the solar blend from (ITO / TiO2 or ZnO/ Ru / CuI / Ag) is fabricated. The thin films were prepared by pulse laser deposition (PLD) technique and deposited on (ITO) glass substrate. The structural, optical and electrical properties of all samples where studied. XRD analysis indicated that the structure of TiO2 and ZnO thin film change from amorphous to polycrystalline if annealed to 450 Co . XRD analysis shows the CuI at room temperature is polycrystalline. The morphology of surface, found the grain size and roughness of TiO2, ZnO and CuI thin film increase as the number of Nd : YAG laser pulse and temperature increased. Optical properties investigation of TiO2, ZnO and CuI thin film showed that as the number of Nd : YAG laser pulse and temperature increase that lead to increase in absorption. Hall effect measurement prove that TiO2 and ZnO are N - type while CuI is P - type semiconductor, as the number of Nd : YAG laser pulses and temperature increase the carrier concentration nH increase while the mobility µH decrease. The I - V characteristics of the fabricated solar cell is measure , it can be noticed that the photocurrent collected from the TiO2 or ZnO is depending on the number of pulses. The increase in the number of the pulses resulting increase in the photocurrent, indicating the dependence of current collection efficiency on number of pulses. In the same material (TiO2) can be noted the number of pulses equal to 200 the conversion efficiency equal to 2.115 % while increase number of pulse to 800 pulse the conversion efficiency increase up to the 5.654 % from this value it can be observed the conversion efficiency increases when the number of the pulses increasing. Also when using ZnO material it observed that the conversion efficiency depend on the number of pulses when the number of pulses equal to 200 the conversion efficiency equal to 1.144 % while increasing the number of the pulses to 800 pulse the conversion efficiency increase up to the 4.231%, as well as when use TiO2 the efficiency increase more than the with use the ZnO. It can be observed that the use of CuI in solar cell the efficiency depend on the number of pulses , increase with increasing number of pulses. I - V parameter of the solar cell with different number of pulse for CuI thin film, can be observe when use the CuI with TiO2the conversion efficiency is higher from the use CuI with ZnO, the value of conversion efficiency when use CuI with TiO2 at 800 pulses up to rage 5.192%, while when use CuI with ZnO the value of conversion efficiency at 800 pulse equal to 3.654% from this value can be conclusion the efficiency of the TiO2 is up from the efficiency of ZnO

التهيج الالكتروني الناتج بواسطة حركة بروتون خلال الماء السائل والحمض النووي باستخدام نموذج درود وبين == ELECTRONIC EXCITATION PRODUCED BY PROTON MOVING INSIDE LIQUID WATER AND DNA USING DRUDE AND PENN MODEL

اسم المؤلف: وسام عبد الله الطون الحمداني
اسم المشرف: رياض خليل احمد العاني
الموضوع العام: علوم الفيزياء
السنة: 2013
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: لتشعيع الانظمة البايلوجية بحزم الطاقة الايونية عدة تطبيقات في الفيزياء الطبية وفي مجال الصحة في الفضاء, كالعلاج البروتوني للسسرطان او حماية رواد الفضاء من الاشعة الكونية. ولاجل السيطرة على التاثيرات الضارة للاشعاع في الانسجة الحية, وفهم هذه التاثيرات اصبح من الضروري تقديم وصف دقيق لفقدان الطاقة من الحزم الايونية في الهدف. استعمل في العمل الحالي ,صيغتا دالتي العزل درود Drude) ( وبينPenn) ) لحساب احتمالية قيام البروتون بانتاج تهيجا الكترونيا في هدفين حيويا بايلوجيا, هما الماء H_2 O)) والحمض النووي DNA)). وكذلك, فان تاثير الكسر الايوني للشحنه الفعالة لقدرة الايقاف الجزيئي (PSPEC) للماء (H_2 O) والحمض النووي DNA)) تم دراستها ماخوذا بنظر الاعتبار التهيج الالكتروني في الهدف. فقدان طاقة الايون يعتمد على نوع الاواصر في المركبات, حيث الحمض النووي ((DNA يتكون من اواصر مفرده وثنائيه وثلاثيه. وحيث ان في الحمض النووي DNA, كل قاعدة نايتروجينيه ترتبط بجزيئه سكر وجزيئة فوسفات. تدعى كل من القاعده والسكر والفوسفات بالنيوكليوتيد, بينما تتكون جزيئة الماء من ذرتي هيدروجين مرتبطته باصره تكافؤيه بذرة اوكسجين مفرده. لذا فهنالك حاجه لمزيد من الاهتمام بالبحث عن تاثير نوع الاصره على فقدان الطاقه. توصف الاستجابه الالكترونيه للهدف بداله خاصه لفقدان الطاقه ELF)), والتي توصف بعدة بصيغ تتطابق مع المعلومات التجريبة البصرية المتوفرة (عند الزخم الصفري المنتقل) ولكنها تستخدم تقريبات مختلفة للحصول على سطح بيثا لاجل توسيع دالة فقدان الطاقه ELF)) لاي طاقه او زخم منتقل. وقد تم الحصول على النتائج باستخدام البرنامج (Wesam - H - DNA. For) الذي كتب بلغه (فورتران90) لاجراء الحسابات العددية . قورنت نتائج العمل الحالي مع المعلومات التجريبيه المتوفرة وكانت مقبولة بشكل جيد في معظم الحالات. | The irradiation of biological systems by energetic ion beams has multiple applications in medical physics and space radiation health, such as hadrontherapy for cancer treatment or protection of astronauts against space radiation. Therefore, for a better control and understanding of the effects of radiation damage in living tissues, it is necessary to advance an accurate description of the energy loss from the ion beam to the target. In the present work the dielectric formalism Drude and Penn have been used to calculate the probability for an energetic proton to produce electronic excitations in two targets of high biological interest, namely, H_2 O and DNA. Also, the effects of ionization fraction of Partial Stopping Power Effective Charge (PSPEC) of H_2 O and DNA has been studied taking into consideration electronic excitation in the target. The proton energy loss strongly depends on the type of bonds in the compounds, where the DNA consists of single, double and triple. In the DNA, each nitrogen base is attached to a Sugar molecule and a Phosphate (P) molecule. Together, a base, sugar, and phosphate are called a nucleotide, while H_2 O has two Hydrogen atoms covalently bonded to a single Oxygen atom. There is a need to pay more attention to investigate the effect of kind of bond on energy loss. The electronic response of the target, characterized by its energy - loss function (ELF), is described by several models that fit the available experimental optical data (at zero momentum transfer), but use different approaches to obtain the Bethe surface, that is, to extend the (ELF) to any energy and momentum transferred. The results have been achieved by using the program (Wesam - H - DNA. for) wich is written in FORTRAN 90 using a software Computer Visual Fortran V6.6, which performed for the numerical calculation. The results of the present work are compared with the available experimental data; it was in good agreement with most cases.

مقارنة نظرية بين HgCdTe وAlGaAs لنظامي البئر الكمي الليزري ذو التركيبين غير المتجانسين == Theoretical Comparison between HgCdTe and AlGaAs Heterostructure Quantum Well Laser Systems

اسم المؤلف: وديان كاظم عبد الزبيدي
اسم المشرف: ابتسام محمد تقي سلمان
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: هذا البحث يصف مقارنة نظرية بين نظامي ولليزر البئر الكمي ذو التركيب غير المتجانس. حيث تم دراسة تاثير العوامل المختلفة لهذا التركيب مثل عرض البئر وعرض الحاجز للبئر الكمي المفرد والمتعدد على عوامل الليزرمثل عامل التقيد البصري وتيار العتبة وكثافة تيار العتبة والربح البصري وقدرة الخرج والكفاءة . بالاضافة الى دراسة كثافة الحالات للبئر الكمي.افضل قيمة لعامل التقييد البصري (0.308) للتركيب ذو ثلاثة ابار كمية و(W=21.5nm) و(0.0224) للتركيب ذو خمسة ابار كمية و(W=11.3nm). عامل التقيد له تحسن كبير في التركيب المتعدد الابار افضل من التركيب ذو البئر الكمي المفرد . واظهرت النتائج ان عامل التقييد للتركيب المتعدد الابار اكبر منه للبئر الكمي المنفرد بمقدار 18 مرة للتركيب وبمقدار 25 مرة للتركيب . هذا التحقيق لتحسين عمل نبيطة الليزر دايود من خلال تاثير عامل التقييد البصري على الربح وتيار العتبة والقدرة الخارجة والكفاءة تحت الانحياز الامامي في المنطقه الفعالة، كانت كثافة تيار العتبة ووكفاءة (89% ل و97% لـ ) | This work is description of theoretical comparison between two systems and for heterostructure quantum well laser. Where studied the effects of the variation parameters for this structure such as a well width, barrier width for Single and Multi - Quantum Well, on laser parameters such as optical confinement factor, threshold current, threshold current density, optical gain, output power and efficiency. In addition we studied the density of states for quantum well.The optical confinement factor has the best value (0.308) for 3QWs at (W=21.5nm) and (0.0224) for 5QWs at (W=11.3nm). It introduced a significant improvement in MQW is much higher than SQW for two systems. The results showed that optical confinement factor of 3QW are much higher (by a factor 18) for and (by a factor 25) for 5QW, from optical confinement factor of SQW. This investigated for improve the work of laser diode device through the effect of optical confinement factor on the gain, threshold current, output power and efficiency under forward bias in active region, where threshold current density , with efficiency (89%for and 97% for )

تحضير ودراسة الخواص الطيفيه الى الوسط الليزري الفعال Er : TiO باستخدام تقانة الصول - جل == Preparation and Study of the Spectroscopic Properties of Er : TiO2 Laser Active Medium using Sol - Gel Technique

اسم المؤلف: هناء محمد ياسين
اسم المشرف: صباح نوري مزهر | بسام غالب رشيد
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: دكتوراه
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ions Doped nano particular titanium dioxide was prepared via sol - gel method under varying conditions (with doping rates equal to 1.24%wt, 2.65%wt, 3.78%wt, 5.05%wt and 6.31%wt). The structure, morphological and spectroscopic properties of prepared doped samples were investigated by a variety of techniques, including XRD, AFM , UV - Visible spectroscopy and photoluminescence spectroscopy.XRD analysis shows that TiO2 prepared samples have amorphous structure turn to polycrystalline anatase structure after annealing process. The lattice constant parameters 'a' and 'c' of the tetragonal lattice anatase TiO2 powder has been calculated; the results showed that the value of 'a' remains essentially unchanged, while the lattice constant 'c' have slightly increased at lower doping rate then become stable at higher doping rate. This is due to a combination of interstitial and substitutional accommodation of the dopant ions.The FTIR spectra for pure and doped samples after annealing process show a single transition peak at wave number around 1200cm - 1 and 1102 cm - 1 respectively. The wavelength of high transition rate of this peak depends on Er3+ concentrations. By Comparing with wavelength of high transition rate of pure TiO2 sample, slightly peak wavelength increments shift occur with increment of doping concentration rate. FTIR spectra give a good indication in direction of synthesis of optical band - pass filter at a wavelength around 9.07μm (~1102 cm - 1).Judd - Ofelt analysis is performed to calculate the three Judd - ofelt of parameters; Ω2, Ω4 and Ω6. From the absorption spectra, the radiative transition probabilities A(J;J’), radiative lifetime τrad and fluorescence branching ratioare calculated for each excited upper manifolds states of Er3+ .A photoluminescence peaks was recorded at wavelength around to 498nm, 533nm and 1533 nm. The emission cross - section σem for prepared samples are calculated. It was founds that sample with doping rate 5.05%wt have high σem values in compares with other samples, and it’s value is close to those value of Er : Glass.According to the spectroscopic properties of doped samples, it could be concluded that Er : TiO2 has the potential to be a laser mat

تخمين مسافات الاجسام باعتماد تقنية المعالجة الصورية با ستخدام المؤشرات الليزرية == Objects Distance Estimation Using Image Processing Technique Based on Laser Pointers

اسم المؤلف: هدى محمد جواد المولاوي
اسم المشرف: علي عبد داود الزكي
الموضوع العام: علوم الفيزياء
السنة: 2011
الموضوع الدقيق: معالجة الصور
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ازدادت اهمية تحديد المدى وابعاد الاجسام عن بعد خلال العقود الاخيرة خصوصا" في الانظمة الروبورتية وانظمة السيطرة الصناعية. لذا توجهنا في دراستنا الحالية الى استخدام المؤشرات الليزرية مع الكاميرا الرقمية لتحديد ابعاد الاجسام ومدياتها عن بعد والعمل في هذه الدراسة ينقسم الى تحديد ابعاد الاجسام في مشهد الصورة الرقمية باستخدام مؤشرليزري، تحديد مديات الاجسام باستخدام صور البقعة الليزرية لمؤشر ليزري واحد حيث تم استخدام عمليات النمذجة لغرض استنتاج موديلات مناسبة لذلك وتحديد مديات الاجسام باستخدام صور لبقعتين ليزريتن في مشهد الصورة وذلك باستخدام عمليات نمذجة مختلفة لمعاملات مختلفة لغرض الحصول على انسب الموديلات الرياضية لتمثيل الحالات الفيزيائية لمشهد البقع الليزرية لغرض ايجاد طريقة سهلة ودقيقة لتحديد مسافات الاجسام. تم انجاز هذه الطرق من خلال بناء خمسة خوارزميات حاسوبية تعتمد على هندسية التقاط الصور للبقع الليزرية الساقطة على الاجسام البعيدة. وتم اختيار هذه الخوارزميات لمسافات الاجسام المختلفة عن الكاميرا تتراوح بين (2 7 - م). ولقد اظهرت النتائج وعمليات النمذجة التي تم تنفيذها باستخدام برنامج Table curve)) ان تقنيات تحديد ابعاد الاجسام بالاعتماد على الكاميرا ومؤشرين ليزريين المسافة بينهما معلومة ( 8سم) اعطت نتائج تمثلت في حالتين. الحالة الاولى عندما تكون قوة تكبير الكاميرا متغيرة لمسافة ثابتة عن الاجسام مقدارها (7م) حيث تم التقاط عدة صورللاجسام ومن خلال تحليل هذه الصورتم الحصول على نتائج جيدة حيث كانت الابعاد المقاسة قريبة جدا للابعاد الحقيقية. الحالة الثانية تمت بتثبيت قوة تكبير الكاميرا والمسافة عن الاجسام كانت متغيرة. اعطت الحالة الثانية نتائج افضل من الاولى.تمت عملية قياس المسافة بطريقتين، الاولى كانت باستخدام مؤشر ليزري واحد وكاميرا وهذه الطريقة تتفرع الى جزئين الجزء الاول عندما تكون قوة تكبير الكاميرا على اصغر قوة ولمسافات مختلفة ( 2 - 7م ) تتغير المسافة لكل حالة ( 1م). تم التقاط عدد من الصور ومن خلال تحليل الصور تم حساب انصاف اقطار البقعة اليزرية وعدد ( pixels) في البقعة اليزرية ومن خلالها تم الحصول على منحنيات عيارية لتخمين المسافة وقد اعطت نتائج جيدة حيث تم الحصول على معادلة قياسية لتحديد المسافة من برنامج ( table curve ) بنسبة خطا مساوية للصفر تقريبا". الجزء الثاني تمثل بحالة التكبيرللكاميرا على اكبر قوة ولمسافات مختلفة ( 2 - 7 م ) تتغير المسافة لكل حالة (1م). تم في هذا الجزء التقاط عدد من الصور ومن خلال تحليل الصور تم الحصول على نتائج جيدة وقريبة الى القياسات الحقيقية. كانت نتائج الجزء الاول افضل من الثاني لان نسبة الخطا مساوية تقريبا للصفر. الطريقة الثانية تمثلت باستخدام مؤشرين ليزريين وكاميرا وهذه الطريقة ايضا تنقسم الى قسمين الاولى عندما تكون قوة تكبير الكاميرا على اصغر قوة ولمسافات مختلفة (2 - 7م ) تتغير المسافة لكل حالة( 1م ) تم خلالها التقاط عدد من الصور وبعد تحليل الصور تم حساب انصاف اقطار البقعة اليزرية ،حساب عامل التدرج ( Scf ) ،حساب انصاف اقطار البقعة اليزرية وعدد ( pixels) في البقعة اليزرية ومن خلالها تم الحصول على منحنيات عيارية لتخمين المسافة وقد اعطت هذه الطريقة نتائج جيدة . تم الحصول على معادلة قياسية لتحديد المسافة من برنامج ( table curve ) وكانت نسبة الخطا مساوية للصفر تقريبا". الجزء الثاني تمثل بنفس الخطوات السابقة مع وضع قوة التكبير الكاميرا على اكبر قوة وهنا ابضا الجزء الاول افضل من الجزء الثاني لان نسبة الخطا تقريبا كانت صفرا" ولكن الطريقة الثانية كانت افضل من الاولى لوجود عامل التدرج فيها. | Over recent decades, the importance of determination the extent and dimensions of objects remotely has been increased especially in the regulations robot and control systems industry. So, the use of indicators laser with a digital camera have been used in the current study to determine the dimensions of objects and their distances. In this study is divided to determine the dimensions of objects in a scene of the digital image by using the laser pointer, and determine the ranges of objects using the laser photo spot for a single pointer where a modeling process for the purpose of finding the suitable models for this task has been used and finally determine the ranges of objects using the images of two laser spots in a scene of an image by using different modeling operations for different transactions for the purpose of obtaining the most suitable mathematical models to represent the physical cases of the speckle laser scene in order to find an easy and accurate way to determine the distances of objects. This has been done through the construction of five algorithms based on the engineering way to take photos of laser spots that fall on the distant object. The selected algorithms for the distances of objects from the camera are in the range (2 - 7m). Results and modeling operations that have been implemented using table curve program have shown that the techniques for the determination of objects dimensions gave the results represented in two cases depending on the camera and two laser indicators with known distance between them (8cm). The first case when the power zoom of camera is variable for a fixed distance from objects of (7m) where several photo images were taken and through the analysis of these images, good results have been obtained where the measured dimensions are very close to the real one. The second case has been performed by installing the power zoom of the camera with a variable distance from the objects. The second case gave better results than the first one.The process of measuring the distance has been done in two ways, the first is by using a single laser pointer with a camera, this method subdivided into two parts; the first part when the power zoom of the camera on a smaller power with different distances (2 - 7m) changing the distance of each case (1m). Through the analysis of images, the radii for laser spot and the number (pixels) in this spot have been calculated. So, a normative curves to guess the distance give good results where a standard equation to determine the distance from the program (table curve) with an error equal to almost zero was obtained.The second part represents the biggest power zoom of the camera with different distances (2 - 7m) changing the distance of each case (1m). In this section, number of images has been captured and through the analysis, good results were obtained which are close to the real measurements. The results of the first part are better than the second because the margin of error is nearly equal to zero. The second way represented by using two laser indicators and a camera and this way was also divided into two parts; the first when the zoom of the camera in a smaller power with different distances (2 - 7m) changing the distance of each case (1m), which capture a number of images and after the analysis process, the calculation of the radii of laser spot, the factor gradient (Scf), radii laser spot and a number (pixels) in the laser spot have been measured which were obtained standard curves to estimate the distance of this method that gives good results. A standard formula to determine the distance from the program (table curve) was obtained and the rate of error is equal to almost zero. The second part represents the same previous steps with a power zoom of the camera on its top power and the first part is better than the second one because the rate of errors was almost zero, but the second method was better than the first because of the gradient factor.

دراسة نظرية للاستطارة الالكترونية المرنة من بعض النوى الفردية == A Theoretical study of Elastic Electron Scattering for some odd nuclei

اسم المؤلف: هدى عبد الجبار حسين
اسم المشرف: الطاف عبد المجيد الرحماني
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: فيزياء الالكترونيات
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: حسب كــل من توزيع كثافة الشحنة النووية وعوامل التشكل لاستطارة الالكترون المرنة للحالة الارضية للنوى الفردية ( 25Mg , 27Al, 29Si 19F بالاضافة الى 31P) الواقعة ضمن القشرة النووية 2s - 1d بالاعتماد على كل من اعداد الاشغال للحالات النووية والدوال الموجية لجهد المتذبذب التوافقــي ذي معلمات حجمية اختيرت لكي تعيد انتاج جذر مربع متوسط انصاف اقطار الشحنة لجميع النوى. وقد وجد ان ادخال المعلمات الاضافية ( وو ) التي تعكس الفرق بين اعداد الاشغال للحالات النووية قيد الدراسة وبين تلك التي يتنبا بها انموذج القشرة النووية يؤدي الى توافق بين النتائج المحسوبة والنتائج العملية لتوزيع كثافه الشحنة النووية لكل قيم المسافة (r). كما تبين لنا ان عوامل التشكل الطولية لاستطارة الالكترون المرنة النظرية تتفق مع النتائج العملية للنوى (,25Mg , 27Al, 29Si 19F بالاضافة الى 31P) كما تم حساب الفرق بين كثافة الشحنة الالكترونية لكــل من ( 24Mg , 25Mg) و28Si , 29Si)) لتوضيح تاثير اضافــة النيوترونات على كثافة الشحنة النووية لكل من النظائر السابقـــة. | The charge density distributions (CDD) and the elastic electron scattering form factors F(q) of the ground state for some light odd mass nuclei in the 2s - 1d shell , , , and nuclei have been calculated. This has been based on the use of occupation numbers of the states and the single particle wave functions of the harmonic oscillator potential with size parameters that have been chosen to reproduce the observed root mean square charge radii for all considered nuclei. It is found that introducing additional parameters, namely and which reflect the difference of the occupation numbers of the states from the prediction of the simple shell model leads to a remarkable agreement between the calculated and experimental results of the charge density distributions throughout the whole range of (r). The elastic electron scattering form factor throughout all values of momentum transfer are in reasonable agreement with the experimental electron scattering form factors for , , , and nuclei. The difference of the CDD of ( - ) and ( - ) isotopes has been calculated to clarify the influence of the additional neutron on the CDD

دراسة العمق البصري للعوالق في منطقتين من العراق باستخدام تقنيات معالجة الصور الرقمية == Study the Aerosol Optical Depth in Two Regions of Iraq Using Digital Image Processing Techniques

اسم المؤلف: هدى عبد الامير عـبود الزهيري
اسم المشرف: علي عبد داود الزكي
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: معالجة الصور
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يتميز تلوث الهواء عن غيره من اشكال التلوث في انه سريع الانتشار حيث لا يقصر تاثيره على منطقة المصدر وانما يمتد الى المناطق المجاورة والبعيدة. يعتبر الهباء الجوي من اكثر ملوثات الهواء شيوعا وخاصة في المناطق الجافـة والصناعية والمناطق المكتظة بحركة مرورية، اذ يمكن ان تكون من اصول طبيعية او غير طبيعية، لذلك تم الاهتمام في قياساتها ولكون كتلتها قليلة لذا تم دراستها على اساس حجـومها. توجهنا في دراستنا الحاليـة لاجراء تحليلات احصائية لمجموعة من الصور الملتقطـة بجهاز الميكروسكوب للهباء المترسب على شرائح زجاجية حيث تم جمعها في ايام مختلفة وفي اشهر مختلفة وفي منطقتين هما (بغـداد : شارع فلسطيـن، وديالـى : الخالـص).اجريت دراسة تحليلية لنسب الهباء المترسب كدالة للزمن في اليوم الواحد وتم مقارنة نتائج المنطقتين وتحديد الفروق بينهما. استخدمت طريقتين بعدة خوارزمات احصائية مختلفة الاولى بحساب مساحة الهباء الجوي المترسب في مستوي الصورة والثانية بحساب حافة جسيم الهباء في مستوي الصورة.ثم حساب انصاف اقطار ومساحات واحجام هذه الجسيمات في الصورة لغرض تصنيفها كدالة لانصاف اقطارها. اهم النتائج التي حصلنا عليها هي معدل المساحة المغطات واختلافها بين المنطقتين (اذ تكون في بغداد اكثر من الخالص وهذا يعود الى طبيعة المنطقة وصفاتها). واظهرت الدراسة تاثير تغير سرعة الرياح على الهباء في الجو وعلى ترسبه طبقا لاحجامها. كذلك اختلاف نسب الترسب لساعات اليوم الواحد وايضا اختلافها بين المنطقتين. استحدثت طريقة جديدة لغرض حساب مساحة وحجم جسيمات الهباء الجوي بالاعتماد على تقنيات معالجة الصور الرقمية. تاخذ بنظر الاعتبار اشكال الجسيمات كروية ,طولية (منتظمة وغير منتظمة) ومتشعبة . ان التقنية المقترحة اظهرت كفاءة عالية واكثر فاعلية في حساب احصائيات التوزيع الحجمي لجسيمات الهباء الجوي وتستمر لفترة اطول مقارنة مع الاجهزة الاخرى التي تفقد كفاءتها على مر الزمن .اضافة الى سهولة التطبيق وتعتبر طريقة جيدة ولاتحتاج الى اجهزة ذات كلفة عالية. | Air pollution differs from other types of pollution; as it is dispersed quickly, and its impact is not limited to the area of origin but rather extends out to the neighboring and distant areas. Aerosol is one of the most common air pollutants especially in the dry, industrial and traffic - congested areas. Its origin could be natural or unnatural, and thus measuring it has been an important issue. Due to its tiny mass, it has been studied on the basis of its sizes. This current study is presented as an analytical and statistics study on a set of images taken via optical microscope of aerosol deposited on glass slides, and collected for several days throughout different months at two different regions (Baghdad/ Palestine Street - and Diyala/ Al - Khalis). The analysis has been performed through studying variant proportions on several measurements of aerosol particles as a time functions, and subsequently the variance in results between the two regions was considered by analyzing the aerosol images. Two methods were used employing statistical algorithms; the first method was by calculating the deposited aerosol area on the image plane. While the second method was by measuring the aerosol particle edge on the image plane, and then measuring the radii, areas and volumes of these particles in the image, and eventually by classifying them as a function of their radii.One of the most significant results we obtained was the average covered area and its variance between the two regions. This average covered area was larger in Baghdad than in Khalis, and this is due to the nature of each region and its properties in addition, wind speed impact on the aerosol and on its deposition according to its size. Furthermore, the different results of deposition proportions are based on the hours of a day also the difference between two regions. Through the present work, a new method of measuring area and volume of deposited aerosol particles with their various shapes whether spherical, longitudinal or intertwined has been concluded depending on image processing techniques . These methods are considered as more effective, more efficient in calculating the statistic volumetric distribution of aerosol particles and last longer compared to other appliances that lose efficiency over time. In addition easily to apply and it’s consider a good method and doesn’t need expensive equipment.

دراسة نظرية لطيف مستويات الطاقة الواطئة ولنوى خفيفة باستعمال انموذج القشرة النووي 3016S14,3014Si16,188Ne10 == Theoretical Study Of Low Lying Spectrum For Light Nuclei By Using Nuclear Shell Model 3016S14,3014Si16,188Ne10

اسم المؤلف: هدى بطرس بهنام مقادسي
اسم المشرف: هادي جبار مجبل العكيلي
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ان طاقات الربط والتهيج حسبت لنوى (_8^18)Ne_10 , (_16^30)S_14 , (_14^30)Si_16 وللمستويات الدنيا باستعمال حسابات انموذج القشرة النووي ولبروتونين في القشرة S,dلنوى (_16^30)S_14 بينما لنيوترونين لنواة (_14^30)Si_(16 ) ,(_8^18)Ne_10 ولمدارات خارج القلب المغلق .عناصر مصفوفة التفاعل تم الحصول عليها من خلال استخدام جهد تفاعل USD,USDA ,USDBنتائج الحسابات النظرية لطاقات الربط والتهيج والمحسوبة باستعمال عناصر المصفوفة النظرية اظهرت تطابقا مع النتائج العملية .حسابات انموذج القشرة استعملت لفهم ودراسة خصائص المستويات الدنيا ولعدد الكتلة لنوى A=18,30 .استعمل القلب المغلق مع التفاعل المتبقي للجسمين ما بين النكليونات الخارجية O8816 ,14 14Si28 .لحالات التماثل الموجبة فان جميع التشكيلات لقشرة S,d اخذت بالحساب باعتبار ان هناك قشرة مغلقة مع جسيمين في مستويات القشرة .S,dتفاعل الجسمين الفعال للنوى اختير على اساس جهد USD,USDA,USDB .اظهرت قيم طاقات الربط والتهيج تطابق جيد مع القيم العملية .واعتبرت الجهود USD,USDA,USDB هي المدخلات الاساسية لحساب الطاقات النووية والتي تتضمن تفاعل نكليون - نكليون .الحسابات اظهرت لنا امكانية اكبر لفضاء تفاعل النكليونات كون طاقات الحالات الارضية متقاربة . | Binding and excitation energies have been calculated at low lying levels for (_8^18)Ne_10 , (_16^30)S_14 and (_14^30)Si_16 nuclei using shell - model calculation with two protons in the S - d shell for (_8^18)Ne_10 , and (_16^30)S_14 while two neutrons for (_14^30)Si_16 in orbits outside the closed core. The effective two - body matrix elements are obtained from the USDA, USDB and (USD) potential interaction. Results of calculated binding and excitation energies are show a good agreement with experimental data with calculated by using theoretical matrix elements . The shell model calculation is used to investigate properties of levels at low lying in the mass number of nuclei A =18 and 30. An inert core with a residual two - particle interaction between the outer nucleons of (_8^16)O_8 , and (_14^28)Si_14 as summed. For the positive parity states all configurations in the s - d shell are taken into account are described by a closed shell, two nucleons in the S - d shell . The effective two - particle interaction is chosen to be a described by the USD,USDA ,and USDB potential. Good agreement with experiment is obtained for the binding and excitation energies. It is considered USDA , USDB and USD potential for two - body matrix element interaction as the most input parameters to the calculation is the nuclear energies, which contains realistic two (N - N) interactions. Provided the calculation is performed in a large enough basis space, the ground - state energy will converge

دراسة بعض التطبيقات التحسسية لاغشية اوكسيد القصدير المشوبة بالانديوم == Study Some Sensing Applications of Indium Tin Oxide(ITO)Thin Films

اسم المؤلف: هبة نوري ذاكر
اسم المشرف: علي جاسم محمد الجابري
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: الاغشية الرقيقة
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا البحث تم تحضير اغشية ثنائي اوكسيد القصدير SnO2 النقية والمشوبة بالانديوم (In ) وبنسب تشويب مختلفة (5,10,15) % بطريقة الرش الكيميائي الحراري حيث رسبت على قواعد زجاجية .الجزء الاول من البحث تضمن دراسة الخصائص الفيزيائية للاغشية المحضرة : التركيبية , الكهربائية والتحسسية (الكهرواجهادية والامبيرومترية) حيث درست بشكل مكثف.طبوغرافية السطح للاغشية درست بتوظيف حيود الاشعة السينية والمجهر الماسح الالكتروني (SEM) ومجهر القوة الذري (AFM) . تاثير كبير لتركيز ايونات الانديوم على طوبوغرافية السطح تمت ملاحظته , حيث ان صور مجهر القوة الذري بينت تاثير زيادة تركيز ايونات الانديوم على كل من الخشونة ومعدل الحجم الحبيبي , اضافة الى تناقص الحجم الحبيبي من 136.16 الى 73.53 نانومتر في حين ازدادت الخشونة من 1.04 الى 2.86 وهذا بسبب وجود عدد من الهضاب التي توزعت بشكل عشوائي على السطح. اثبتت قياسات حيود الاشعة السينية ان الاغشية المحضرة بالرش ذات تركيب متعدد التبلور من نوع رباعي (Tetragonal) وباتجاه تفضيلي عند المستوي ,(110)مع وجود ثلاث قمم صغرى تعود للمستويات 101)),(200),(200) وهذه القمم تصغر وتضمحل بزيادة نسبة الاشابة بالانديوم .درست الخصائص الكهربائية المتضمنة منحني (I - V) عند الظلام , فقد بينت النتائج ان التيار المستمر يزداد مع زيادة نسبة الاشابة بالانديوم .الجزء الثاني من البحث فقد تضمن دراسة خصائص التحسس للاغشية المحضرة وبالذات الخصائص الكهرواجهادية , وتم اجراء القياسات بتعريض الاغشية لموجات تضاغطية بمدى واسع من الترددات (1 kHz - 10 MHz) ولفولتية انحياز ضمن المدى (0 - 15 V) لثلاث اوساط : الهواء , الماء ومحلول الكلوكوز المائي , وتم تسجيل التردد الرنيني المناظر لكل قيمة من قيم تركيز الكلوكوز (0.05, 0.1, 0.15, 0.2, 0.25)% لكل من الاغشية النقية والمشوبة انفة الذكر.استنادا الى ماذكر اعلاه فان بلورة ثنائي اوكسيد القصدير واحدة من البلورات الكهرواجهادية وذلك من خلال الاستجابة الجيدة للاغشية للترددات الرنينية , لقد اجريت القياسات المذكورة لتراكيز مختلفة عند درجة حرارة الغرفة وقد وجد ان تيار التحسس يزداد بزيادة تركيز الكلوكوز ويتناقص مع زيادة نسبة الاشابة بالانديوم . تزداد الخصائص التحسسية الكهرواجهادية والتيار بازدياد نسب الكلوكوز وازدياد نسب الاشابة بالانديوم وافضل تحسس عند 15% من تركيز الاشابة بالانديوم | In the present work, undoped SnO2 films and doped with In films with various doping concentration 5, 10 and 15% are prepared in chemical spray deposition method in which the films are deposited on glass substrates. The first part of the work studies the physical properties of the as deposited pure and In doped SnO2 thin films, including . Structural, electrical, and sensing (piezoelectric and amperomtric) properties of these films have been studied intensively. The surface topography of the films is studied by using the X - ray diffraction,and the Scanning Electron Microscopy (SEM) and the Atomic Force Microscopy(AFM)the influence of the indium concentration on film surface morphology has been cosederd . Film roughness (RMS) and average grain size are affected by varying indium addition concentrations, XRD measurements have proven that the sprayed films are polycrystalline structural of a tetragonal type with the (110) plane as preferential crystallographic orientation for all prepared samples in addition to three small peaks belong to the (101), (200) and (211) planes, these peaks decrease and vanishe with increasing of doping concentration. The grain size decreases from 136.16 to73.53nm and the roughness incrrease from 1.04 to 2.86 nm for (5, 10and15)% due to the existence of many hillocks, which are faceted and distributed randomly on the relatively smooth surface.The electrical properties includ (I - V) current in the dark condition have been studied, the results show that direct current increase with the increase of doping concentration. The second part of the work studies the sensing properties of the prepared films in a special case, the sensitive characteristics (piezoelectric). The measurements are carried out by exposing the thin film to mechanical waves in a range of sweeping frequencies of (1 kHz - 10MHz) at bias voltage in the range of (0 - 15V). The characteristic resonance frequency is recorded, due to the glucose concentration of (0.05, 0.1, 0.15, 0.2 and 0.25) in aqueous solution for undoped and doped Indium (5wt.%, 10wt and 15wt.%). The results were showed conclusively that the SnO2 crystal is one of the most candidate piezoelectric crystals, namely that these thin films have good response for resonance frequency. The glucose sensing behavior of the films is observed for various concentrations at room temperature . The sensing current is found to be increase with the increase in the glucose concentration and decreased with increase in a doping concentration. The sensitivity properties for piezoelectric and current increase with increase glucose concentration and increase with increase doping concentration and the best sensitivity at 15% of Indium concentration.

تجزئة الصور الرقمية بواسطة الخوارزميات الجينية == Digital Image Segmentation By Genetic Algorithms

اسم المؤلف: هبة خضير عباس الجبوري
اسم المشرف: علي عبد داود الزكي | عبد الله احمد رشيد
الموضوع العام: علوم الفيزياء
السنة: 2006
الموضوع الدقيق: معالجة الصور
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تلعب التجزئة الصورية دورا مهما في الرؤية الحاسوبية (Computer Vision).هي : " تقسيم الصورة الرقمية الى مناطق هدفيه ، وذلك بتحديد المناطق الرقمية التي لها صفات متشابهة عن المناطق غير المتشابهة" . تعد مشكلة التجزئة الصورية من المشاكل التي يستخدم فيها الحل الامثل ،في هذا البحث تم استعمال طريقة الحل الامثل التي تعتمد على الخوارزمية الجينية Genetic Algorithm لايجاد التجزئة الصورية المثلى . منظومة التجزئة الصورية الجينية (GAIS) تحوي على جزئين : الجزء الاول : يعتمد على ايجاد القيمة المثلى باستعمال العامل الجيني (عامل التزاوجcrossover) فقط .الجزء الثاني : يعتمد على ايجاد القيمة المثلى باستعمال العوامل الجينية (عامل التزاوج crossover، عامل الطفرة mutation ). وهذه الطرائق المختلفة المقترحة قد اختبرت باستعمال صور ذات تدرج رمادي وصور ملونة وباحجام مختلفة ، وقد قورن بين هذه الطرائق . بين انجاز منظومة (GAIS) واعديه الخوارزمية الجينية ونجاحها في حل مشكلة التجزئة الصورية .فقد تضمن العمل الاعتماد على طريقة التصنيف باستعمال المسافة الدنيا وبينت نتائج الاختبار كفاءتها العالية على تصنيف مناطق الصورة . كما وتم الاعتماد على طريقة التجميع Clustering التقليدية وتطبيقها في الخوارزميات الجينية بالاعتماد على دالة الصلاحية المتمثلة بدالة (Minimum Distance) . وبينت النتائج امتلاك الخوارزميات الجينية كفاءة عالية جدا في تجزئة الصورة الرقمية . | Image segmentation plays an important role in computer vision . It is a process that partitions a digital image into several meaningful regions, by identifying regions of an image that have common properties while separating regions that are dissimilar . The image segmentation problem is posed as an optimization procedure .In this thesis, an optimization approach based on genetic algorithm is introduced for finding optimal image segmentation .The design and implementation of genetic algorithm image segmentor (GAIS ) system are described . GAIS consists of two main parts . The First one finds optimal value; using genetic operators such as ( Crossover operator only). The Second part of GAIS system employs finds optimal value ; using genetic operators ( Crossover operator and Mutation operator).The different proposed / implementation segmentation methods of the GAIS system were tested using Color and Gray image and different sizes . Results reported show good performance .Comparisons between different methods are also given . System performance shows that GA is promising for solving image segmentation problem and that a lot of work is expected in this field . That may be work content dependent on classification method by using minimum distance and to explain selection result high efficiency on image region. classification as, and to be complete dependent on a traditional assembly method and performance in GA by dependent on fitness function the represent by minimum distance (Error function) and to have GA with very high efficiency in segment digital image regions.

دراسة الخواص الفيزيائية والميكانيكية لالواح البناء الجاهز المصنوعة من النفايات الورقية والزراعية == Preparation and Study of The Physical and Mechanical Properties for Ready Building Panels Made from Paper and Agricultural Dumps

اسم المؤلف: نورة بلبول شويع
اسم المشرف: عباس فاضل عيسى | محمد علي جابر
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: واسط
الصفحات الاولى:
المستخلص: The investigation in this research use two types of polymers are polyvinyl acetate (PVA) and poly ol (PO) include mixed by (1 : 3) to obtain a polymer blend which has been used percentages (5%, 10%, 15%, 20%) to be mixed with cement, and old newspapers for the production of cement fiber board, where cut old newspapers and mixed with an electric mixer after the addition of a quantity of water (0.6), then drained, mixed with the polymer blend and added the remaining amount of water from the prescribed percentage ,added to it cement gradually .The mixture poured into certain molds and left to harden for 28 days and then cut off by the ASTM to study the physical and mechanical properties for the board had better specifications at any ratio of the polymer blend additive.the rice husks have been taken ,cleaned washed and dried for several days, grinded by volumetric fraction less than 600 micrometers. The powder added to the cement , mixed with the polymer blend and water by ratio 0.6 .The mixture poured into molds and left for 28 days and then cut off by international standard specifications to study the physical and mechanical properties to see any percentages is the best .The results that 10% of the polymer blend was the best ratios for the board which characterized by good specifications with 5% of old newspapers and rice husks, which used the fibers of oldVInewspaper after shredded and mixed with cement and the addition of the husks of rice milled at different rates for the best results and to obtain strong cement fiber board.These samples were made and cut according to standard specifications and for mechanical tests (such as flexural strength ,compressive strength and tensile strength) and physical properties (density, water absorption)and thermal properties (thermal conductivity and combustion resistance).The results were showed that the panels containing old newspaper 5% is better than others in terms of the physical ,mechanical and thermal properties in which were added of polymer blend 10% . The samples contained old newspapers , rice husks 5% and 10% of the polymer blend have the best results of which contain old newspaper with 5% silica and 10% of the polymer blend.

دراسة تاثير استبدال (Y2O3,Sb2O3,SrO) على الخصائص التركيبية والكهربائية للمركب فائق التوصيل HgBa2Ca2Cu3O8 == Study the effect of (Y2O3,Sb2O3,SrO) substatution on the structural and electrical properties of the HgBa2Ca2Cu3O8+? superconductor compound

اسم المؤلف: نور قاسم فاضل
اسم المشرف: كريم علي جاسم
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تتضمن الدراسة تاثير الاضافات (SrO or Y2O3 or Sb2O3) على الخواص التركيبية والكهربائيه للمركب الفائق التوصيل . [Hg 1223] تم حضير النماذج الاتيه HgBa2 - xSbxCa2Cu3O8+δ) وHgBa2 - xYxCa2Cu3O8+δو (HgBa2 - xSrxCa2Cu3O8+δ ولقيم x=0, 0.1, 0.2, 0.3 بطريقه تفاعل الحاله الصلبة.وقد درس الخصائص التركب البلوري باستخدام حيود الاشعة السينية ( XRD ) واظهرتحليل حيود الاشعة السينية ان جميع العينات ذات تركيب (tetragonal) تحوي على اطوارتركيبه فائقه التوصيل منخفضة (1212و1201) وعالية (1223) , وان النسب الطوريه ) نسبه الطورالعالي 1223) تزداد عند الاستبدال. كذلك وجد بان قيمة الثابت الشبيكة (c) يقل عند استبدال (SrO or Y2O3 or Sb2O3) في موقع الباريوم.حيث ان قيمه ثابت الشبيكه c للمركب HgBa2 - x(Sr or Sb or Y)x Ca2Cu3O8+δ ل x=0 هي c=15.75 ,في حين عند استبدال Srتنخفض قيمه ثابت الشبيكه cالى c=15.3510 (x=0.1), 15.3811 (x=0.2), 15.4431 (x=0.3),كذلك تنخفض قيمه ثابت c عند استبدال Sbالى 15.3417 (x=0.1), 15.4274 (0.2), 15.4432 (x=0.3).عند استبدال Yتنخفض قيمه ثابت الشبيكه cالى15.353 (x=0.1), 15.397 (0.2), 15.473 (x=0.3). . لحساب درجه الحراره الحرجه تم دراسة المقاوميه الكهربائيه باستخدام تقنيه القطاب الاربعة, حيث وجد ان درجه الحرارة الحرجه تزاد عند استبدال SrO وY2O3 وSb2O في موقع الباريوم وان اعلى درجه حرارة حرجة تم الحصول عليها عند استبدال Srوهي 138 كلفن. في درجة حرارة الغرفة تم قياس ثابت العزل الكهربائي كداله للتردد في المدى (Hz50 - 1MHZ), قد وجد ان ثابت العزل الكهربائي للتردد HZ 50 هو 45.489، بينما عند استبدال (Sr)ينخفض ثابت العزل الكهربائي الى 45.1715 (x=0.1)، 24،2123 (0.2x=) ,16.82781313 (x=0.3)، وانخفض ايضا ثابت العزل الكهربائي عند استبدال (Sb) الى 12،708 (x=0.1)، 10.339 (0.2x=) ,10.816 (x=0.3) لكن عند استبدال (Y) ثابت العزل الكهربائي يزداد الى 63.3682 (x=0.1) الى 26،378 (x=0.3). | The present thesis includes effect of (SrO, Y2O3 and Sb2O3) substatution on the structural and electrical properties of the [ Hg - 1223] compounds. Which have prepared the superconducting compounds HgBa2Ca2Cu3O8+δ ,HgBa2 - xYxCa2Cu3O8+δ, HgBa2 - xSbxCa2Cu3O8+δ and HgBa2 - xSrxCa2Cu3O8+δ (x=0.1,0.2,0.3) by useing Solid state reaction method. The crystal structures for all the specimen have been determined by of X - ray diffraction. Shows the XRD that all specimen have tetragonal structures correspond to the high [ Hg - 1223] and low - phase[ Hg - 1201 and Hg - 1212], and there is a decrease in c - parameter value when substituted of (Sb2O3 or SrO or Y2O3) in Barium site, where that c - parameter value of HgBa2 - x(Sr or Sb)x Ca2Cu3O8+δ for x= 0 is c=15.75, while at substatution (Sr) decreased c - parameter value to c=15.3510 (x=0.1), 15.3811 (x=0.2), 15.4431 (x=0.3), also decreased c - parameter value at substatution (Sb) to 15.3417 (x=0.1) , 15.4274 (0.2) and 15.4432 (x=0.3), at substatution (Y) decreased c - parameter value to 15.353 (x=0.1) , 15.397 (0.2) and 15.473 (x=0.3). while the volume fraction of the high - Tc phase increased with the increase of (Sb2O3 or SrO or Y2O3) content. Electrical resistivity was used to find the critical temperature using the four - probe technique, found that transition temperature which it increased when substituted (Sb2O3 or SrO or Y2O3), and we get a highest critical temperature is 138k. The dielectric constant have been measured and is a function of applied frequencies ( range of 50 Hz to 1MHz) at room temperature HgBa2 - x(Sr or Sb)x Ca2Cu3O8+δ for x= 0. It was found that the dielectric constant of at the frequency 50Hz is 45.489 , while at addition(Sr) decreased dielectric constant are 45.1715 (x=0.1) , 24.2123(0.2) and 16.82781313 (x=0.3),also decreased dielectric constant at addition(Sb) to 12.708 (x=0.1) , 10.339(0.2) and 10.816 (x=0.3).but when addition(Y) dielectric constant increasing are 63.3682 (x=0.1) to 26.378 (x=0.3). It was found that dielectric loss factor (tan) of all specimens decreased with the increase of frequency.

دراسة خصائص التفاعل النووي (?,n) للنوى الفردية - الزوجية Z?29) ? 21) == Studying the Properties of Nuclear Reaction (?,n) for Odd - even Nucleus (21?Z?29)

اسم المؤلف: نور عادل محمد
اسم المشرف: فاطمة عبد الامير | سميرة احمد
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: الدراسة الحالية تركزت على دراسة الخواص النووية للتفاعل النووي (الفا, نيوترون ) لنويات الهدف ذات الاعداد الذرية الفردية وللتفاعلات ( (_21^45)Sc(α,n)(_23^48)V, (_23^51)V (α,n) (_25^54)Mn , (_25^55)Mn(α,n)(_27^58)Co , (_27^59)Co(α,n)(_29^62)C , (_29^63)Cu(α,n)(_31^66)Ga (من خلال حساب المقاطع العرضية لتفاعلات (الفا , نيوترون ) للتفاعلات المذكورة اعلاه والمنشورة في الادبيات العالمية ( EXFOR , ENDF , JEF , JEFF , GENDL) لانتقاء الطاقات الملائمة في حساب التفاعل للمستوى الارضي باستعمال على برنامج الحاسوب ( (Matlab - 7.6 وبخطوات طاقية معينة . تم رسم وجدولت النتائج المستحصلة من تطبيق المعادلات شبه التجريبية لتمثيل جميع التفاعلات التي تربط بين تغير المقطع العرضي مع مدى الطاقة المعين . بالاضافة الى حساب وجدولت بعض الخواص النووية للنظائر الموجودة في هذه التفاعلات كما وتم حساب وجدولت كل من طاقة التفاعل وطاقة العتبة لكل تفاعل ومقارنتها مع النتائج الموجودة في مركز الدراسات النووية (NNDC) وهي متوافقة معها بشكل جيد جدا . وكذلك تم حساب قدرة الايقاف باستعمال برنامج SRIMو تم حساب الحاصل النيوتروني وفقا لصيغة زكلر لكل تفاعل بالاستعانة بقدرة الايقاف . وقد استعملت قيم المقاطع العرضية لتفاعلات (الفا ، نيوترون) في حساب المقاطع العرضية لتفاعلات العكسية (نيوترون ،الفا) وللمستوى الارضي وذلك باشتقاق المعادلة شبه التجريبية لقيم المقاطع العرضية العكسية لكل من التفاعلات الاتية (_23^48)V(n,α) (_21^45)Sc , (_25^54)Mn(n,α)(_23^51)V , (_27^58)Co(n,α)(_25^55)Mn , (_29^62)Cu(n,α)(_27^59)Co , (_31^66)Ga(n,α)(_29^63)Cu وايجاد الثوابت لكل تفاعل. تم رسم وجدولت النتائج المستحصله وايجاد معادلة ملائمة للرسم التي يمكن من خلالها الحصول على مقاطع عرضية بطريقة مباشرة وسريعة وبسيطة وموثوقة | This work was concerned on study the properties of (alpha, neutron) reactions for nuclei that’s have odd atomic number in nuclear reactions [(_21^45)Sc(α,n)(_23^48)V,(_23^51)V (α,n),(_ 25^54)Mn (α,n)(_27^58)Co, (_27^59)Co(α,n)(_29^62)Cu ,(_29^63)Cu(α,n)(_31^66)Ga] , by calculating the cross sections of (alpha, neutron) reactions. The nuclear reactions were published in the world libraries (EXFOR , ENDF , JEF , JEFF , GENDL) most recent to select the suitable energies in calculating reverse nuclear reactions for ground state. In the present work, the cross sections were calculated from semi - empirical formula which were obtained and listed in tables using computer programs(matlab 7.7R2008). These formulas represent the variation of the cross section with energy, which could be used to predict the values of uncalculated cross sections. The stopping power according to Zeigler formula was used in order to obtain the neutron yield for each nuclear reaction. Neutron yield is very important to determine the best way to produce specific isotopes. The evaluated cross sections for (α,n) are used to calculate the cross sections for inverse reactions (n,α) using empirical formula of the inverse cross sections .The values of neutron energy and inverse cross sections have been drown and listed in tables. Qo - value, threshold energy, reduced mass and binding energy have been calculated and listed in tables for each reaction

الخصائص الكهروضوئية لاغشية TiO2 : CuO المحضرة بطريقة البلازما المنتجة بالليزر للتطبيقات الفوتونية == Optoelectronic properties TiO2 : CuO films prepared by Laser induce plasma for photovoltaic applications

اسم المؤلف: نهى حسن حرب سلمان
اسم المشرف: صباح نوري مزهر
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الاغشية الرقيقة
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في القياسات تحقق من الخواص التركيبية والبصرية والكهربائية لاغشية ثنائي اوكسيد التيتانيوم TiO2)) النقية والمشوبة بمادة اوكسيد النحاس (CuO) والتي رسبت على ارضيات زجاجية منظفة بشكل مناسب بدرجة حرارة الغرفة وبتراكيز مختلفة من اوكسيد النحاس CuO (0,5,10,15,20)wt%. وقد استخدمت لذلك طريقة ترسيب الليزر النبضي (PLD) باستعمال ليزر النيدميوم ياك النبضي وبمعلمات ترسيب ثابتة وهي الطول الموجي 1064nm عند طاقة ثابتة 800mومعدل تكرار6Hz . وكان عدد النبضات المستخدمة (500), وقد لدنت الاغشية بدرجات حرارة مختلفة423, 523)K).تم تشخيص طبيعة تبلور الاغشية من خلال دراسة نمط حيود الاشعة السينية(XRD). اظهرت النتائج ان صفات الاغشية المحضرة ذات تركيب متعدد التبلور ومن النوع الرباعي والاتجاه السائد (110).كما وجد ان الحجم الحبيبي يزداد مع زيادة درجات الحرارة والتراكيز.كذلك تم دراسة طبوغرافية السطح باستخدام مجهر القوى الذرية (AFM), اذا تبين ان الحجم الحبيبي للاغشية المحضرة قد اعتمد على درجة حرارة التلدين. كما ادت زيادة درجة حرارة التلدين الى زيادة خشونة السطح.تمت دراسة الخواص البصرية بطريقتين من خلال تسجيل طيفي النفاذية والامتصاصية لمدى الاطوال الموجية (300 - 1100)nm، ومن خلال فحص شده الاستضاءة الفوتونية(PL) . اذ وجد ان قيمة فجوة الطاقة تقل بزيادة تراكيز مادة CuO والتلدين في كلا الفحصين.ومن خلال دراسة الخصائص الكهربائية للاغشية المحضرة, بينت النتائج ان التوصيلية الكهربائية قد زادت بينما هبطت قيمه طاقة التنشيط مع زيادة تركيز CuO ودرجة حرارة التلدين . اخيرا تم التعرف على نوع حاملات الشحنه من خلال قياسات تاثير هول, وكانت كافه الاغشية المحضرة من النوع السالب n , وبزيادة التركيز ودرجة حرارة التلدين يزداد تركيز حاملات الشحنة بينما تقل التحركية. | In this measurement, structural, optical, electrical properties of TiO2 (Nanocrytalline and CuO additive TiO2) were investigated. are successfully deposited on suitably cleaned glass substrate at constant room temperature, and different concentrations of CuO (0,5,10, 15,20)% wt. Pulse laser deposition(PLD) technique was used at a constant deposition parameter such as : (pulse Nd : YAG laser with λ=1064 nm, constant energy 800 mJ, repetition rate 6 Hz and No. of pulse was (500).The films were annealed at different annealing temperatures 423K and 523 K. The XRD measurements show that as deposit TiO2 : CuO thin films had polycrystalline structure, and XRD data of thin films coincided with tetragonal. The preferred orientation was along (110) direction for Rutile phase . The results show that the crystallite size increases with the increase of concentration of CuO and annealing temperature. AFM measurements confirmed that the films have good crystalline and homogeneous surface.The Root Mean Square (RMS) values of thin films surface roughness and grain size increased with the increase of annealing temperature. The optical energy gap is calculated by two techniques UV - Visible spectrum and Photoluminescence(PL)spectrum. Both indicate that the energy gap decreased with the increase of concentration of CuO and annealing temperature. By studying the electrical properties of TiO2 : CuO thin film, D.c measurements show that the increase of CuO concentration in the prepared thin films increases the conductivity, while the activation energy (Ea1,Ea2)decreases. Hall Effect measurements show that all films have n - type charge carriers and the increase of CuO concentration and annealing temperature lead to increase the concentration of charge carriers , while the mobility decreases

دراسة تاثير لزوجة المحاليل في مذيبات مختلفة على الخواص الطيفية لجزيئتي (2 مثيل نفثالين,2 - 3 ثنائي مثيل نفثالين) == Studying the viscosity effect of solution in different solvent on the spectral properties for (2 - Methylnaphthalene, 2, 3 - Dimethylnaphthalene Molecules

اسم المؤلف: نسمه عدنان جبر
اسم المشرف: عبد الله احمد رشيد | وليد صلاح عبد الوهاب
الموضوع العام: علوم الفيزياء
السنة: 2011
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم دراسة وقياس اطياف الفلورة والامتصاص لمحلول (2 - مثيل نفثالين) المذاب في المذيبات (الهكسان, الايثانول , البرافين) كدالة للتركيز المولاري وبطول موجي مهيج (λex=270nm) ولقد تم حساب الكفاءة الكمية ( (qFM, زمن الفلورة الاشعاعي ( ( τFM ومعدل العمليات الاشعاعية (KFM) واللا اشعاعية(KIM) حيث وجد ان الكفاءة الكمية لمحلول (2 - مثيل نفثالين) في الهكسان والايثانول عند التركيز [10 - 4M] تكون مساوية الى qFM=0.20)) و( qFM =0.15) على التوالي. اما عند حساب الكفاءة الكمية لمحلول (2 - مثيل نفثالين) في البرافين فانها تساوي ( qFM =0.24) ان هذا الاختلاف في قيم الكفاءة الكمية يكون بسبب اختلاف قطبية المذيب ولزوجته. كما وجد ان زيادة التركيز المولاري يؤدي الى نقصان شدة طيف الفلورة وبالتالي نقصان الكفاءة الكمية وثابت العمليات الاشعاعية وذلك بسبب ظاهرة الامتصاص الذاتي. لقد تم حساب الكفاءة الكمية نسبة الى مركب النفثالين بكفاءة مقدارها qFM =0.14) ) كمركب قياسي عند نفس الطول الموجي المهيج. ان جميع القياسات تمت بدرجة حرارة الغرفة. ان مركب (2 - مثيل نفثالين) يظهر فلورة الاكسايمير في المحاليل المركزة وعند درجة حرارة الغرفة . فعند اذابة (2 - مثيل نفثالين) في (الهكسان, الايثانول والبرافين) عند التراكيز العالية [0.5,1,1.5,2, 2.5,3] مولاري نلاحظ انخفاض شدة الفلورة النسبية للجزيئة المونمر مع ظهور حزم واضحة وغير متحللة عند الاطوال الموجية الطويلة400 nm) ) تزداد مع زيادة التركيز,تمثل هذه الحزم طيف فلورة الاكسايمر. لقد تم دراسة طيف فلورة الاكسايمر في محاليل تحتوي على الاوكسجين ومحاليل خالية من الاوكسجين حيث نلاحظ زيادة شدة الطيف عند سحب الاوكسجين الذائب في المحاليل. لقد تم حساب الناتج الكمي للجزيئة المونمر والاكسايمر (ΦFD, ΦFM) من تكامل المساحة تحت طيف الفلورة المصحح من ظاهرة الامتصاص الذاتي وايضا تم حساب تركيز النصف [M]h حيث وجد مساوي الى 1.5, 1.1mol)=[M]h ) لمحلول (2 - مثيل نفثالين) في الهكسان بالاوكسجين وبدون الاوكسجين على التوالي. اما بالنسبة لمحاليل (2MN) في الايثانول والبرافين فان [M]h= 1.25, 1.7 mol)) و[M]h= 2, 1.25 mol)) بالاوكسجين وبدون الاوكسجين على التوالي. لقد تم حساب معاملات جزيئية اخرى مثل ناتج فلورة الاكسايمر/المونمر المولاري (K) , معامل Stern - Volmer)) والكفاءة الاكسايمر الكمية (qFD) حيث وجد انها تساوي (qFD=0.18 ,0.26) لمحاليل (2 - مثيل نفثالين) في الهكسان بالاوكسجين وبدون اوكسجين وتساوي ( (qFD=0.13, 0.21 لمحاليل (2 - مثيل نفثالين) في الايثانول بالاوكسجين وبدون اوكسجين اما لمحاليل (2 - مثيل نفثالين) في البرافين فان الكفاءة الكمية تساوي(, 0.35 22 (qFD=0. حيث نلاحظ ان قيم الكفاءة الكمية تزداد مع زيادة لزوجة المذيب اما احتمالية تكوين الاكسايمرKDM[M] فانها تتناسب عكسيا مع لزوجة المذيب. كما تم دراسة طيف الفلورة لمركب (3,2 - ثنائي مثيل نفثالين) المذاب في الهكسان عند التراكيز ] M 2 - 10×5, 2 - 10 , 3 - 10, 4 - 10 [بطول موجي مهيج (λex= 270nm) عند درجة حرارة الغرفة. حيث وجد ان قيمة الناتج الكمي تقل بزيادة التركيز المولاري بسبب ظاهرة الامتصاص الذاتي, ان قيمة الكفاءة الكمية لمركب ( - 3, 2 ثنائي مثيل نفثالين ) تساوي qFM = 0.26)) عند التركيز [10 - 4] مولاري وان هذه القيمة تكون كبيرة مقارنة مع قيمة الكفاءة الكمية لمركب (2 - مثيل نفثالين) بسبب مجموعتي المثيل المعوضتين. | The absorption and fluorescence spectra for 2 - Methylnaphthalene (2MN) solution which dissolved in hexane, ethanol, paraffin as a function of concentration at excitation wavelength (λex= 270nm) was measured and studied. The quantum efficiency (qFM), the radiative fluorescence lifetime (τFM), rate parameter of radiative (KFM) and non - radiative (KIM) processes were calculated. Where the quantum efficiency is equal to (qFM =0.20), (qFM =0.15) for 2 - methylnaphthalene solution dissolved in hexane and ethanol at concentration [10 - 4M], respectively. But the quantum efficiency of 2 - methylnaphthalene in paraffin is equal to (qFM =0.24) at same concentration. This difference in the value of quantum efficiency refers to difference in polar solvent and viscosity. It is found that the increase in molar concentration led to decrease the intensity of spectrum, quantum efficiency, rate parameter of radiative process (KFM) because of the effect of (self - absorption) phenomena. In addition, the quantum efficiency measurement was calculated relatively to standard compound of naphthalene with quantum efficiency (qFM = 0.14) at same excitation wavelength. All measurement was at room temperature. (2MN) exhibits excimer fluorescence in concentrated solutions at room temperature. When (2MN) dissolved in hexane, ethanol, paraffin at concentrations [0.5, 1, 1.5, 2, 2.5, 3 M], the relative intensity of monomer fluorescence bands are decreased and emergence a broad, structureless bands at longer wavelength (400 nm) which is increase with increasing molar concentration, these bands refer to the excimer fluorescence. We study an excimer fluorescence spectrum in oxygenated and deoxygenated solution. When dissolved oxygen expelled, the intensity of fluorescence was increased. The quantum yield of monomer (ΦFM) and excimer (ΦFD) fluorescence calculated from the area under monomer and excimer fluorescence spectra, which corrected from self - absorption effect. The (half - value) concentration [M]h was measured which is equal to ([M]h=1.5, 1.1 mol) for oxygenated, deoxygenated solutions of (2MN) in hexane. While the solution of (2MN) in ethanol and paraffin, the half - value concentration equal to ([M]h= 1.7, 1.25) and ([M]h= 2, 1.5), respectively. This difference is because of solvent viscosity. Other molecular parameter were measured, like the molar excimer/monomer fluorescence yield (K), Stern - Volmer coefficient (KSV), excimer quantum efficiency qFD which is equal to (qFD=0.18, 0.26) for oxygenated and deoxygenated solutions of (2MN) in hexane. So the excimer quantum efficiency equal to (qFD =0.13, 0.21), (qFD =0.22, 0.35) for (2MN) oxygenated and deoxygenated solutions of (2MN) in ethanol and paraffin, respectively. The rate parameter of excimer formation KDM [M] is inversely proportional to viscosity. The spectral properties of (2, 3 - Dimethylnaphthalene) dissolved in hexane was studied at concentration [10 - 4, 10 - 3, 10 - 2, 5×10 - 2M] at exciting wavelength (λex= 270nm), at room - temperature. The quantum yield decreased with increase of molar concentration because of self - absorption effect. The quantum efficiency of (2, 3 - DMN) in hexane at concentration [10 - 4] M is equal to (qFM =0.26) which is high compared with quantum efficiency of (2MN) in hexane because of two methyl groups substitutes
1 ... 67 68 69 70 71 ... 117