عرض: 25 50 75 100 النتائج

نتائج البحث: 25 من أصل 3,804

معالجة مياه الصرف الصناعي لمصافي النفط بالاكسدة الانودية المباشرة == Treatment Of Petroleum Refinery Wastewater By Direct Anodic Oxidation

اسم المؤلف: انغام سامي حمزة
اسم المشرف: علاء نور غانم الموسوي
الموضوع العام: الهندسة الكيمياوية
السنة: 2016
الموضوع الدقيق: الهندسة الكهروكيمياوية
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: مياه الصرف الصناعي لمصافي النفط الناتجة بصورة رئيسية من عمليات تكرير النفط الخام والصناعات التحويلية، مواد التشحيم والبتروكيماويات الوسيطة. هذه السوائل هي المصدر الرئيسي للتلوث البيئي المائي. تتكون مياه الصرف الصناعي من الزيوت والشحوم والمركبات العضوية ا | Petroleum refinery wastewater originating from petroleum industries primarily resulted in refining crude oil and manufacturing fuels, lubricants and petrochemical intermediates. These effluents are a major source of aquatic environmental pollution. The wastewaters are composed of oil and grease, toxic organic compounds along with many other minerals. In this study, wastewater of Al - Najaf petroleum refinery was used as electrolyte solution in the experiments, and the effect of some variables on the removal of organic material as a pollutant in term of COD were studied. The performance of anodic oxidation represented by COD removal was studied using 1 liter batch - mode parallel plate electrochemical reactor at constant initial COD concentration and fixed agitation speed of 250 rpm with the variation of operating conditions that were expected to have a major effect on process. These variables were : electrodes material (platinum, stainless steel, graphite, PbO2, and carbon felt), current densities (5, 15, 25) mA cm - 2 for carbon felt electrode and (10, 30, 50) mAcm - 2 for other electrodes, pH (4, 7, 10), temperatures (25, 40, and 55)?C and with electrolysis time up to 120 minutes. The results show that the direct anodic oxidation process gave the best COD removal percent of 84.88% and 86.27% at 50 and 25 mA cm - 2 current densities for PbO2 and carbon felt anode materials, respectively. The highest COD removal was predicted at pH 4 and the best temperature at 55?C for all electrode types. The reaction was followed by pseudo first - order kinetics rate. As well, it was studied the effect of current density on the current efficiency, instantaneous current efficiency, energy consumption, charge load with the time and calculated activation energy.

تحسين الاداء الحراري للمائع النانوي في المبادلات الحرارية == Enhancement Of Thermal Performance Of Nanofluids In Heat Exchangers

اسم المؤلف: شهد فالح حسن
اسم المشرف: تحسين علي الحطاب
الموضوع العام: الهندسة الكيمياوية
السنة: 2017
الموضوع الدقيق: الهندسة الكهروكيمياوية
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: التقنية الواعدة التي تستخدم لتعزيز عملية الانتقال الحراري هي باستخدام الموائع النانوية كخيار جيد واستبدالها محل السوائل التقليدية الشائعة. والمبادلات الحرارية هي معدات واسعة التطبيق في كثير من التطبيقات الصناعية المختلفة وبالتالي يكون سلوك وخصائص المائع | The most promising technique that is used to enhance the thermal performance for the heat transfer processes is using the nanofluids as a good choice to replace the conventional fluids. The heat exchangers are the wide range application equipment that is used for different industrial applications and therefore, the properties and the behavior of the fluid media are the main control parameters in equipment design of the heat exchangers. In this work an attempt was made to investigate experimentally the thermal performance of nanofluid which consists of deionized water (DI) as a base fluid and Aluminum oxide (Al2O3) as solid nanoparticles. The investigation includes two parts, the first one is studying the effect of addition of solid nanoparticles to the base fluid on the thermo - physical properties such as density, viscosity and thermal conductivity for different values of the volume fraction of nanoparticles. The second part includes the experimental work studying the effect of the nanoparticles (Al2O3) volume fraction (0.05, 0.1 with base fluid ), heat flux (With three values 7.4W,11W,16.8W) and angle (With two values 90?,45?) with four models (four different type from wicks in heat pipe) to enhance the heat transfer in heat pipe with two cases of transient temperature distribution and steady state. One model is different from the other by using different wicks in a heat pipe in all models. The general results referred to the enhancement of heat transfer rate are represented by increasing the concentration of nanoparticles (Al2O3) volume fraction such as (?=0.1) is better than (?=0, ?=0.05), increasing heat flux such as (16.8W) is better than (7.4W,11W) and an inclination angle such as( 45?) is better than (90?).At the transient state the time to reach to the steady state decreases when the concentration of the nanoparticles (Al2O3) volume fraction increases, the heat flux increases and the angle incline. In model 4 the heat transfer enhancement is better than that of model 3 and model 3 is better than that of model 2 and model 2 is better than that of model 1.The time to reach the steady state decreases in model 4 more than model 3, model 2 and model 1. The temperature decreases in the heat pipe when we gradually sidle from heater. The time to reach to steady state found in model 4 at concentration of nanofluid (?=0.1) and heat flux (16.8W) in angle (45?) is (19 min). In the steady state when we increase the concentration of the nanoparticles (Al2O3) volume fraction at the same distance (z) the temperature increases ,The increase in the heat flux of the hot part of the heat pipe will always increase the temperature in the heat pipe and the temperatures distribution in the heat pipe will be improved. The thermal performance of the heat pipe is enhanced by increasing the concentration of the nanofluid , the heat flux and by inclining the heat pipe from 90? angle to 45? angle such as in result of model 4.

تصميم تقسيم مساحة نظام الارسال الضوئي لنظم الاتصالات == Design And Implementation Of Optical Space Division Multiplexer For Tera (B/S) Communication Systems

اسم المؤلف: مصدق ماهر عبد الزهرة
اسم المشرف: ابراهيم عبد الله حمزة الشمري
السنة: 2017
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: اتصالات الالياف البصرية هي العمود الفقري للبنية التحتية للاتصالات السلكية واللاسلكية التي تدعم شبكة الانترنت. النظام الاحادي الالياف المستخدم لنقل البينات لم يعد يلبي طلب الحصول على القدرة العالية والمتنامية بشكل مستمر. هناك العديد من الطرق الممكنة لزياد | Optical fiber communication system is considered as the backbone for the infrastructure of telecommunications that handles the internet. The exponentially growing capacity is no longer satisfied by using transmission of single mode fiber. There are several possible methods for increasing transmission capacity over fixed bandwidth. These include mix many signals with optical - carrier onto a one optical fiber by achieving various wavelengths, modulation employing different amplitude levels, and two orthogonal subcarriers and polarization. An extra dimension that a fiber can offer for achieving more information is space.This project demonstrates simulation systems for Space Division Multiplexing (SDM) transmission system using Few - Mode Fiber (FMF). Polarization division multiplexing (PDM) and Dense Wavelength Division Multiplexing (DWDM) techniques are also used in this system to increase total system data rate. For the ultra - high capacity need of SDM, Few Mode Fiber (FMF) was proposed as SDM best technology for obtaining ultra - high bit rate systems with long haul transmission. Inter - mode losses that appears in higher - order - modes was the most problem to be resolved. In this thesis, the description and design of three SDM systems were explored by using both QPSK and 16QAM modulation formats : single channel SDM system with PDM technique, 8 - DWDM channels over 7 modes SDM/PDM system, and 16 - DWDM channels over 10 modes SDM/PDM system proposed as future of ultra - high capacity optical system.By using 16QAM format and bit rate per channel of 40Gb/s, the maximum long reach of our designed single channel SDM/PDM system is 1020Km. A transmission reach of 760Km was achieved for 8 - WDM - 7modes - SDM/PDM system and 260 Km for 16DWDM - 10modes - SDM/PDM. At QPSK modulation format the maximum demonstrated reach was 1460 Km for single channel SDM/PDM system. A long - haul transmission of 1080 Km was recorded for 8 - WDM channels - 7modes - SDM/PDM system and 510 Km for 16 - DWDM channels - 10modes - SDM/PDM system.The total bit rate of single channel - 3modes SDM/PDM system was 240G/s at 40Gb/s bit rate per channel. The total bit rate was achieved by using 8 - DWDM channels - 7modes SDM/PDM system is 4.48 Tb/s at 40Gb/s. The highest bit rate was achieved by using 16DWDMchannels - 10modes SDM/PDM system so that the total achieved bit rate is nearly 12.8Tb/s.Chromatic Dispersion (CD) compensator using Digital Signal Processing (DSP) was proposed to compensate chromatic dispersion losses. Frequency and phase estimators were proposed in the designed systems to remove frequency offset and phase change by using Viterbi and Viterbi algorithms.Adaptive MIMO equalizer using constant modulus algorithms was proposed to compensate deferential group delay, polarization mode dispersion, and other losses simultaneously. Numerical results demonstrated that the methods are very effective in compensating the narrow band filtering and are very robust to channel estimation noise.The demonstrated systems were designed and tested by using (VPI transmission maker v.9.5) powerful software package.SDM techniques provided us with an important source to obtain more system flexibility, scalability, and capacity.

تصميم مضاعف تناظري خطي محسن بنطاق واسع يعمل باربعة ارباع == Design Of Improved Wideband Linear Four Quadrant Analog Multiplier

اسم المؤلف: رسل صلاح خضير
اسم المشرف: عبد الكريم مخيف عبيس
السنة: 2017
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: استخدمت المضاعفات التناظرية على نطاق واسع في دوائر الاتصالات والشبكات العصبية ككاشفات للطور ومضاعفات للتردد ودوائر لمزج الاشارات والتضمين وفك التضمين. في التطبيقات التقليدية مثل دوائرالتضمين تعتبر ترددات التشغيل والسلوك الخطي للانظمة والمديات المسموح بها | Analog multipliers have been widely exploited in communication circuitries, phase detectors, neural networks, frequency multipliers, mixers, and modulation and demodulation circuits. In conventional applications, such as modulation circuits, the linearity, frequency of operation, and input voltage ranges are issues of great importance for multipliers. This work targeted these issues through the design of two types of four quadrant analog multipliers operating in wideband frequency ranges and having very high linearity with input and output voltage ranges of ±10V.The first wideband four - quadrant analog multiplier is designed using wideband squaring and operational amplifier (OPAMP) circuits. The wideband OPAMP is designed using 10 NMOS transistors based on 0.35 µm NMOS technology with supply voltages of ?12V. The wideband OPAMP has exhibited an open loop voltage gain of 3336545. The squaring circuit is built using two NMOS transistors and two wideband OPAMPs. The first wideband multiplier is built using two identical squaring circuits, two difference amplifiers, and one summing amplifier. It is characterized by high input - output linearity range of - 10 V to +10 V for both inputs, ±10 V input and output voltage ranges, and cutoff frequency of about 5 GHz. The second wideband four quadrant analog multiplier is designed using NPN bipolar junction transistors. It is built with two main circuits, which are the multiplier cell and the output circuit. The multiplier cell is built using a modified Gilbert multiplier, while the output circuit is a high gain circuit designed for changing the differential output of the multiplier cell to a single output having a voltage range of ±10 V. The multiplier circuit is designed with supply voltages of ?12 V. It is characterized by high input - output linearity range of - 10 V to +10 V for both inputs, ±10 V input and output voltage ranges, and cutoff frequency of about 1 GHz.Both multipliers are designed and tested on PSpice in ORCAD / Version 16.6.

بناء معيد ترميز تكراري شبه مثالي للاشارات المرمزة المعتمدة على مخطط تانر == Implementation Of Modified Suboptimal Iterative Decoding For Tanner - Graph Based Coded Signals

اسم المؤلف: محمد ثامر نصر
اسم المشرف: احمد عبد الكاظم حمد
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: في هذا العمل, تم اقتراح خوارزميتين لتحسين اداء معيد الترميز التكراري التجميعي. الاول انجز باضافة رموز ارشاد بين سيل البيانات التي تدخل الى المرمز. في هذه الطريقة, رموزالارشاد ترمز مع البيانات المدخلة (رموز الارشاد المرمزه او الداخليه) مقارنة بالطريقة الاع | In this work, two algorithms were suggested in order to improve the performance of systematic RA decoding. The first one was accomplished by the insertion of pilot symbols between the data stream that entering the encoder. In this way the pilot symbols are encoded along with the input data (encoded or internal pilots) in contrast to the usual way where pilots are inserted after encoding (unencoded or external pilots). The positions where pilots should be inserted are chosen in such a way that to improve the minimum Hamming distance and/or to reduce the error coefficients of the code. Moreover, the known pilots have higher reliability than data and can significantly improve the initial decoding.The second proposed algorithm includes the utilization of the inserted pilots to estimate scaling (correction) factors. Two - dimensional (2D) correction system was suggested in order to enhance the performance of traditional Minimum - Sum (MS) decoding of regular RA codes. By calculating the mean square difference (MSD) between the values of received pilots and the a - posteriori data of bit and check node related to them, which are created by the MS decoder, an adaptive method can be achieved for getting the correction factors.Since encoded pilots in systematic RA code are embedded in data, it is possible to puncture all or part of them to increase the code rate. The pilots still have their effect on increasing the minimum Hamming distance.Extensive simulation tests reveal that the suggested quasi - optimal algorithms supply error performance be able to compare as Sum - Product (SP) decoding whilst maintain less complexity. Practical experiments are carried out by utilizing the capability of data acquisition toolbox supported by MATLAB to provide a hardware interface with the computer sound card. Here, the sound card plays the role of ADC and DAC converter in the physical layer. A different graphical user interfaces (GUI) are designed for the transmitting and receiving terminals to facilitate the selection of different code options. Signals are transmitted over wireless channel using a 2.4 GHz band indoor audio tranceiver. According to the aquired results, the modified coding system outperforms the original one when it is tested over AWGN and fading channels. An improvement may be realized about 1.5 dB and 1.3 dB at BER=?10?^( - 5) for punctured and unpunctured systematic (50,35,3,7) code with adaptive scaling, with three encoded pilots over AWGN channel and about 3.4 dB and 3.3 dB at BER=?10?^( - 4) for punctured and unpunctured systematic (50,35,3,7) code with constant scaling, with two encoded pilots over fading channel.

مراقبة انذار المرضى عن بعد الزمن الحقيقي اعتمادا على الصحة الالكترونية الصحة العنكبوتية الصحة الخلوية وشبكات التحسس اللاسلكية حالات الدراسة موضع منام المريض سكر الدم استجابة الجلد الكلفانية والتخطيط العضلي == Remote Patients Monitoring / Alarming In Real Time Based On E - Health / I - Health / GSM - Health And WSN, (Case Study : PP, BG, GSR And EMG

اسم المؤلف: علي جاسم رمضان
اسم المشرف: سمير جاسم محمد | محمود شاكر نصر
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: Patient's health monitoring / diagnosing systems have become the focus of attention of researchers today. At the present time, the researchers are dealing with the E - health fields to develop and improve the healthcare systems and they work to combine the GSM and Internet technologies together.In the presented work, the researcher designed a portable real time wireless medical system for monitoring / diagnosing the patients' status based on E - health / GSM - health / I - health and wireless sensor network (WSN) under ZigBee protocol, and to support alarming and printing of medical reports subsystems.The presented system consists mainly of four subsystems, which are sensing & data transceiver, base station (BS), GSM and Internet. Where sensing & data transceiver subsystems be in the patients' lobbies and connected remotely with the base station (BS) subsystem in the wireless sensor network that collect and display the sensing data in it. Also in the designed system, the GSM and Internet technologies are inserted practically in the network.The implemented system measures the biomedical data utilizing a group of sensors that are not available in the country's hospitals in such integrated system, which are the patient position sensor (PPS), galvanic skin response sensor (GSR), blood glucose sensor (BGS), and electromyography sensor (EMG). Moreover, the system has the ability to add many other sensors.In the proposed system, three nodes (lobbies) are considered according to the facilities available, but it can monitor / diagnose unlimited patients' numbers.The system monitors the sleep position and skin conductance (indicator to patient's calm) of the patients in real time with alarm for each abnormal case in the base station (BS) and in lobbies, and it also follows up the glucose rate in patient's blood and diagnose the electromyography (muscle and nerve) status.The GSM subsystem (GSM - health) is used for remotely following - up the patients' status by sending SMS alarm in time for any abnormal case of the patient's sleep position and skin conductance, also it has ability to send the glucose data to doctor's phone. All these services are performed by using a personal phone device only without using any additional GSM modem or other apparatus, so this method reduces cost, complexity and delay time of the system that's done by interfacing the phone with the PC directly via USB port and the messages sending procedure executed using special SMSs AT commands, so the doctors become able to communicate with BS using SMS or voice calling to give the fast and direct necessary guidance.The Internet subsystem (I - health) is another excellent service for the presented system, by which remotely following - up the glucose levels by uploading the glucose data to a specific web site. It is performed by designing a web site that is programmed using VB.NET and ASP.NET languages. of course, user login feature is added to protect the privacy of patients and feedback comments feature between the doctors and patients to take the important guidance.The system has ability to introduce a printed hard copy report about the patient's electromyography status or result and blood glucose levels, by utilizing VISUAL BASIC program. Moreover, it performs searching process about the active nodes in network, this means that it detects any new node (new patient) and put it in service. In addition, the system records the patient's information and stores his health data for any archiving process or statistical study.The main hardware that is used in the implemented system includes MCUs, sensors and transceivers, and used the LABVIEW program to display the data in its GUI windows in the computer of BS.The system has been implemented practically at low cost and low power, gave expected and accurate results, and presented to the specialists doctors and they have expressed their conviction and effectiveness of the system in practice.

تقييم اداء نظام تحويل المويجات المنفصلة - مازج تقسيمات التردد المتعامد المشفر للتطبيقات ذات السرعة العالية == Performance Evaluation of DWT - COFDM System For High Speed Applications

اسم المؤلف: ضفاف طلال شاكر
اسم المشرف: سعد سفاح حسون
السنة: 2014
الموضوع الدقيق: هندسة الكهرباء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: The internet revolution has created the need for wireless technologies that can deliver data at high speeds in a spectrally efficient manner. However, supporting such high data rates with sufficient robustness to radio channel impairments requires careful selection of modulation techniques. The demand for high - speed mobile wireless communications is rapidly growing. OFDM technology promises to be a key technique for achieving the high data capacity and spectral efficiency requirements for wireless communication systems. Abstract In this thesis, Inverse Discrete Wavelet Transform (IDWT) is used as a modulation technique instead of Inverse Fast Fourier Transform (IFFT) with coded OFDM due to its excellent orthogonality and superior spectral containment properties of wavelet filters. Coded Orthogonal Frequency Division Multiplexing (COFDM) is the same as OFDM except that forward error correction is applied to the signal before transmission. This is to minimize errors in the transmission due to lost carriers from frequency selective fading, channel noise and other propagation effects. Convolutional code is used in this thesis as a forward error correction code. The proposed (DWT - COFDM) system is simulated under the effect of additive white Gaussian noise channel, and multi - path fading channel at different values of Doppler frequencies (22.2Hz, 41.7Hz and 444.4Hz) which are the most significant impact channel parameters on the bit error rate performance. The proposed system is also compared with DWT - OFDM, FFTCOFDM and FFT - OFDM systems. It is found that the proposed system can significantly improve the BER performance and it performs better than the other three systems. On the other hand, convolutional code and DWT is used to reduce the peak to average power ratio (PAPR) which is considered the serious problem in any wireless communication system using multi carrier modulation techniques like OFDM systems by using two of the most important non distortion techniques which are selective level mapping (SLM) and partial transmit sequence (PTS) and the results show that the proposed systems for SLM and PTS techniques can perform better than the conventional SLM and PTS. The results also show that the proposed PTS technique performs better than the proposed SLM technique.

اكتشاف العطل الارضي المنفرد واخماده ذاتيا باستخدام السيطرة على ملف بترسون في شبكة التوزيع == Detection of Earth Fault And Self - Extinguishing By Controlling Petersen - Coil In Distribution Grid

اسم المؤلف: فريال ابراهيم الظفيري
اسم المشرف: عبد الغني عبد الرزاق عبد الطائي | قاسم كرم عبد الله
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: ان اكثر الاعطال شيوعا والتي تتعرض لها الشبكة الكهربائية في العالم هو Single Line to Earth حيث ان عطل احدى الاطوار مع الارضي في الشبكات الكهربائية, يسبب هذا قوسا كهربائيا اضافه الى جهد كبير , اكبر من جهد الطورين مع بعضهما مما يزيد خطورة الفصل والعزل في ال | All over the world, the most common faults in the distribution network is the single line to ground fault. A single phase fault with the earthing in the distribution networks causes electrical arc as well as high voltage than the two phases together which increase the danger of separation and isolation in networks. Consequently, this case can be controlled through Peterson Coil which turns off or reduces the electrical arc that makes the network safer. This work has using technique to detect the earth fault in the single - phase by distinguishing between the higher and the lower values of the currents. Also, this technique is used to detect the capacity of earthing network lines and the possibility to adapt the capacitor for inductance in order to detect the electrical arc during faults and to detect the earth leakage.Moreover, we have used many methods to control Peterson coils such as using PID Controller , Fuzzy Logic Controller, Hybrid control PID and Fuzzy System and Adaptive Neural Fuzzy Inference system, to determine the earth fault current at values equal to the current in the two sound phases. To getting best results for the fault current through conducting lab experiences by using DC Servo motor and Arduino. And the fault current is converted from the rated current, thus thousands of tons of copper cost are save. They were used to carry this high voltage. Finally, the first practical part (Simulink) was implemented through Mat lab (R2011a) and (R2013a) , On the other hand, the second practical part was in the lab, where servo motors Where used, variable and non - variable inductance , the drive to isolate the control loop from the power, PID and PWM, have also used the Arduino system to program the overdrive.

ضغط البيانات باستخدام تمثيل الترميز التسلسلي == Data Compression By Using Chain Code Representation

اسم المؤلف: فنر علي جودة
اسم المشرف: توفيق عبد الخالق الاسدي
الموضوع العام: علوم الحاسبات
السنة: 2014
الموضوع الدقيق: علوم الحاسبات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: In this thesis we have proposed an efficient lossless image compression system. This system consists of two parts : the first part is compression procedure that is based on two approaches of chain code representation. The first approach is Variable Vertex

اكتشاف العيب للصور الشعاعية مع التعليق باستخدام المربع الاصغر لماكنة الدعم الموجه وقواعد عامة وخاصة للتصنيف == Defect Detection of Radiography Image With Annotation Using Lssvm_Gsc Techniques

اسم المؤلف: وفاء محمد سعيد الاسدي
اسم المشرف: يحيى مهدي هادي الميالي
الموضوع العام: علوم الحاسبات
السنة: 2014
الموضوع الدقيق: علوم الحاسبات
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بابل
الكلمات الدلالية:
  • Image Processing
  • Weld Image Defect Detection
  • Image annotation
  • Radiography Image
الصفحات الاولى:
المستخلص: استرشادا بالشعوربالمسؤولية ورغبة في مساعدة اكتساب معرفة عميقة حول دراسة تنوع العيوب في صور التصوير الشعاعي، لهذا سنتعرف على هذه العيوب الموجودة في هذه الصور، ومن ثم اعطاء كل صورة بعض الكلمات التي تعكس محتوياتها الرئيسية، وبناء قاعدة بيانات للصور مع الشرح | Guided by the sense of responsibility and its desire to help gain a deep knowledge and the diversity of the defects exist in the radiography images, this Dissertation recognizes the defects exist in the these images, then given each image some keywords re

نمذجة مقتزح لتحسين تنبؤ استيقاظ متوسط التحكم بالوصول في شبكات الاستشعار اللاسلكيه == Modeling A Suggested Modified Predictive Wakeup Medium Access Control on WSN

اسم المؤلف: فوزية وليد خزعل
اسم المشرف: سعد طالب حسون الجبوري
الموضوع العام: علوم الحاسبات
السنة: 2014
الموضوع الدقيق: علوم الحاسبات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: The deployment of the wireless sensor networks (WSN) was increased due to the rapid development in all electronic and communication devices. There are many problems and challenges regarding their applications. One of their major challenges is the energy p

تصميم وبناء نظام هجين للتنبؤ بالشكل الثلاثي للبروتينات == Design And Implementation of Hybrid System For Protein Tertiary Structure Prediction

اسم المؤلف: مهند محمد جاسم الياسري
اسم المشرف: نبیل ھاشم الاعرجي
الموضوع العام: علوم الحاسبات
السنة: 2014
الموضوع الدقيق: علوم الحاسبات
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: تبقى مشكلة التنبؤ ببنية البروتين كنوع من التحدي العقلي والتنفيذي على حد سواء. (PSP) تبقى مشكلة التنبؤ ببنية البروتين وبالتالي فان اهداف هذه الاطروحة هي : اولا، اقترح منظورا جديدا للمساهمة في تطوير وزيادة المعرفة في مجال "طي البروتين العملية" (عن طريق وصف | The Protein Structure Prediction (PSP) problem remains as both mental and implemental challenge. Therefore, the objectives of this dissertation are : First, suggest new perspective for contributing in development and knowledge increasing in the "protein f

تقنية توليد مفتاح منحنيات بزير بالاعتماد على بصمة الاصبع لامنية المعلومات == Bezier Curves Key Generation Based on Fingerprint For Secure Information

اسم المؤلف: وائل مهدي بريج
اسم المشرف: وسام سمير بهية
الموضوع العام: علوم الحاسبات
السنة: 2015
الموضوع الدقيق: تقنيات المعلومات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: المقاييس الحيويه هي احد الحقول المهمه في تعريف هوية الانسان والامنيه. بصمة الاصبع فريده لكل شخص وهي لاتتغير خلال الحياة. تقترح هذه الاطروحه تقنيه جديده في امن المعلومات والتثبت من هوية المرسل من خلال توليد مفتاح تشفير من بصمة الاصبع. يعتمد المفتاح المتولد | Biometrics is one of the important tendencies in human identification and security. Fingerprint is unique for any individual and it is not change through the life. This thesis suggests an approach for information secrecy and authentication on networks. T

تقويم امنية البلوتوث باستخدام تقنية المنطق المضبب == Evaluation of Bluetooth Security Based on Fuzzy Logic Technique

اسم المؤلف: سمير حميد عبد الشهيد
اسم المشرف: ستار بدر سدخان المالكي
الموضوع العام: علوم الحاسبات
السنة: 2014
الموضوع الدقيق: علوم الحاسبات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: خوارزمية تشفير البلوتوث E0 هي نوع من انظمة التشفير الانسيابي، مع امنية جيدة، والتي تستخدم على نطاق واسع في نظام الاتصالات اللاسلكية. الهدف الرئيسي لهذه الرسالة هو استخدام المنطق المضبب لتصميم مقوم هما (E تم اختيار معلمتين ( يتعلقان بمتتابعة المفتاح الم | The Bluetooth E0 cryptosystem is a type of the stream cipher cryptosystem, with good security, and it is widely used in wireless communication systems.The main aim of this thesis is to use the Fuzzy Logic to design an evaluator for the security of Bluet

حول التوزيعات المختلطة == on Mixture Distributions

اسم المؤلف: رسل ناصر عباس
اسم المشرف: كريمة عبد الكاظم مخرب الخفاجي
الموضوع العام: علوم الرياضيات
السنة: 2014
الموضوع الدقيق: الرياضيات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: نظرا لاهمية التوزيعات الخليطة في مختلف مجالات الحياة ) الطب، الزراعة، الصناعة،.....( كانت مساهمتنا هذه من خلال هذا البحث في بناء التوزيع الثنائي الخليط حيث يعتمد على خلط هذا التوزيع مع توزيعات Possion, Erlang, wighted lindly على تحويل المعلمة. باسثخدام | Due to the importance of mixture distributions and mixture models, which are statistical models involving mixture distribution, in many fields of real life like biology, chemistry, geology, medicine, actuarial science and so on, so our contribution is to

حول التقريب الرتيب للدول متعددة المتغيرات == on Bivariate Monotone Approximation

اسم المؤلف: جنان محمد هادي القيسي
اسم المشرف: ايمان سمير عبد علي بهية
الموضوع العام: علوم الرياضيات
السنة: 2014
الموضوع الدقيق: الرياضيات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: This thesis deal with the two dimensional problem for monotone approximation.we answer George A. Anastassiou question and we generalize a direct theorem for monotone approximation to the two dimensional theorem for monotone approximation to function in f

الخواص الدينمية لدالة ايكيدا == The Dynamical Properties of Ikeda Map

اسم المؤلف: وفاء هادي عبد الصاحب
اسم المشرف: افتخار مضر طالب الشرع
الموضوع العام: علوم الرياضيات
السنة: 2014
الموضوع الدقيق: الرياضيات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: في عملنا, درسنا داله ايكيدا وهي من الدوال الغير خطيه في البعد الثالث وصيغتها I_(a,b) ((x@y@t))=(1+a x cost - a y sint@a x sint+a y cos?t@bt)) اعداد حقيقيه a,b حيث درسنا الخواص الدينمية العامه لداله ايكيدا ثم درسنا الخواص الفوضويه لها حيث برهنا ان داله ايك

امثلية العدسات المغناطيسية ثنائية القطب المتناظرة == Optimization of Symmetrical Double Polepiece Magnetic Lenses

اسم المؤلف: لمياء ميري صالح الجنابي
اسم المشرف: طالب محسن عباس الشافعي
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: A computational study has been carried out to investigate the influence of the optimization variables, by mathematical function represent axial magnetic field distribution for magnetic unsaturated double polepiece magnetic lens. It should be mentioning th

دراسة الخواص الكهربائية للمركبات النانوية (PMMA - Ag) و(PMMA - Ti) == Study of The Electrical Properties of (PMMA - Ag) And (PMMA - Ti) Nanocomposites

اسم المؤلف: فاروق ممتاز عبد عمران الجبوري
اسم المشرف: بهاء حسين صالح ربيع المرعب
الموضوع العام: علوم الفيزياء
السنة: 2013
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: Two types of nanocomposites (PMMA - Ag) and (PMMA - Ti) have been prepared using casting method and different concentrations of nanomaterial (silver nanoparticles (Ag), titanium nanoparticles (Ti)). The electrical properties (D.C and A.C) of the (PMMA - A

حسابات طريقة دالة الكثافة لانظمة جزيئية واهب جسر قابل == Density Functional Theory Calculations For Donor - Bridge - Acceptor Molecular Systems

اسم المؤلف: جعفر طعمة احمد
اسم المشرف: حامد ابراهيم عبود محمد التميمي
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:

تاثير اضافة (الفضة, السيريوم) على بعض الخصائص الميكانيكية والتركيبية لسبيكة (المنيوم - سليكون) == The Effect of (Ag, Ce) Addition on Some Mechanical And Structural Properties For (Al - Si) Alloy

اسم المؤلف: الحاق عبد مسلم حسن صكبان
اسم المشرف: عبد العزيز عبيد موسى العكيلي | جاسم محمد سلمان المرشدي
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: تعد سبائك الالمنيوم المسبوكة مع السليكون كعنصر سبك رئيس من اهم السبائك التجارية بسبب امتلاكها خصائص سبك فائقة, ولهذه السبيكة تطبيقات واسعة في صناعة السيا ا رت والفضاء. يهدف هذا البحث الى دارسة تاثير اضافة عنصري الفضة والسيريوم على سبيكة )المنيوم_سليكون(, | Aluminum alloys with silicon as the major alloying elements are the most important commercial casting alloys because of their superior casting characteristics, which are widely applied in the aerospace and automotive industries.This work aims to study th

دراسة بعض الخصائص الفيزيائية لمتراكبات (PVA - PAAm - CoO) النانوية == Study of Some Physical Properties For (PVA - PAAm - CoO) Nanocomposites

اسم المؤلف: حيدر محمد محسن التميمي
اسم المشرف: مجيد علي حبيب | رحيم كعيد كاظم
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: البحث يتضمن تحضير المت ا ركبات النانوية (PVA - PAAm - CoO) باستخدام طريقة الصب ركيز مختمفة من جسيمات اوكسيد الكوبمت النانوية المضافة. وقد درست بعض الخصائص الفيزيائية قبل الاضافة وبعدها.اظهرت نتائج المجهر الالكحروو الماسح ) SEM ( وجحى ل فىر ر للاشعة جح | The research includes preparation of (PVA - PAAm - CoO) nanocomposites by using casting technique with different concentration of nano additives (cobalt oxide nanoparticles) and study of some physical properties of (PVA - PAAm - CoO) nanocomposites films

دراسة الخواص الكهربائية والبصرية للمتراكبات (PVA - PVAC - Ti) النانوية == Study The Electrical And Optical Properties of (PVA - PVAC - Ti) Nanocomposites

اسم المؤلف: وليد خالد كاظم الشمري
اسم المشرف: مجيد علي حبيب
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: In this study, (PVA - PVAC - Ti) nanocomposites have been prepared by using casting method with different weight percentages of titanium nanoparticles. The (PVA - PVAC - Ti) nanocomposites have been diagnosed by different methods such as fourier transform

The Effect of Coupled - Channels In Collisions Between Heavy Lons Near The Coulomb Barrier

اسم المؤلف: نور هادي عباس
اسم المشرف: khalid S. gassim | fouad A. mageed
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:

الكشف عن الجينات المقاومة للكاربابنيم لبكتريا Acinetobacter baumannii المعزولة من عينات سريرية في محافظة بابل == Detection of Carbapenem - Resistant Genes of Acinetobacter Baumannii Isolated From Clinical Samples In Babylon Province

اسم المؤلف: رعـد عبد العباس حمزة الهرموش
اسم المشرف: ايمان محمد جار الله
الموضوع العام: علوم الحياة
السنة: 2015
الموضوع الدقيق: الاحياء المجهرية
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: للفترة من اذار 2014 الى اذار 2015 تم جمع 1300 عينة سريرية مختلفة (عينات ادرار ومسحات جروح وحروق وعينات دم ومسحات من الفم والاذن والعيون بالاضافة لعينات البراز والقشع) من اثنين من مستشفيات محافظة بابل (مستشفى الحلة التعليمي ومستشفى بابل التعليمي للنسائية و| During the period between March 2014 and March 2015, a total of 1300 clinical specimens (urine, wounds, burns, blood, throat, ear, eye, stool, and sputum) were collected from two hospitals in Babylon province; Al - Hillah Teaching Hospital, and Babylon Hospital for Maternity and Pediatric. All specimens were cultured and 10 Acinetobacter baumannii isolates were obtained from clinical specimens in a percentage of (0.76%) distributed in blood 1 (0.6%), urine 2 (1%), wound infection 1 (0.75%), burn 5 (0.85%) and throat 1 (2%). This study was conducted to determine the occurrence of carbapenem resistant A. baumannii isolates obtained from Hillah hospitals. Isolates were identified according to API20E system and further confirmed using PCR technique. Antibiotics susceptibility was assayed by using disks diffusion method according to CLSI recommendations. All isolates revealed positive results with rapid iodometric test indicting the ability of beta lactamase production. Phenotypic detection of carbapenemase production was performed using the imipenem - EDTA disk and modified Hodeg's test (MHT). Then isolates were subjected to monoplex PCR targeting blaOXA - 51, blaOXA - 23, blaOXA - 24, blaOXA - 58, blaIMP, blaSIM blaNDM - 1, blaNDM - 2 and blaVIM genes, as well as, efflux pumps genes. One of the identified isolates (10%) was found to be imipenem, meropenem and ertapenem resistant, this isolate gave positive result with the imipenem - EDTA disk and (60%) of isolates were positive to MHT. PCR experiments showed ; all isolates were harbored blaOXA - 51 gene, four (40%) isolates were harbored blaOXA - 23 gene, three (30%) isolates were harbored blaOXA - 24 gene, four (40%) isolates were harbored blaOXA - 58 gene, five (50%) isolates were harbored blaIMP gene, six (60%) isolates were harbored blaSIM gene, two (20%) isolates were harbored blaNDM - 1 gene, four (40%) isolates were harbored blaNDM - 2 gene, while none of these isolates harbored blaVIM gene. The present findings suggest that emergence of (OXA - 23, OXA - 24, OXA - 58, IMP, SIM, NDM - 1, NDM - 2) carbapenemase producing A. baumannii clinical isolates in Hillah City hospitals. Also there are indicative appearance of efflux pump genes ; (50%) for Ade - A and Ade - B each other, (40%) for Ade - C, (80%) for all of Ade - R and Ade - S, (100%) for all of Ade - I and Ade - J, and (50%) for Ade - Y. All isolates of A. baumannii appear as MDR, while only one appear to be as PDR. The trans - mobility of resistant genes was examined by trans - conjugation experiment ; the results indicated that only blaIMP and blaOXA - 23 genes were transferred horizontally in the current study. In attempting to investigate any blaNDM gene variation the results showed some different than NCBI - Blast A. baumannii blaNDM - 1 and blaNDM - 2 it may as a unique genotyping.These results revealed that carbapenemase producing A. baumannii were detected in both phenotypic and genotypic methods (PCR). This underlies the importance of their accurate identifications and reporting to prevent the emergence of complete resistance to the most potent drugs against A. baumannii in Babylon province.
1 ... 104 105 106 107 108 ... 153