Show: 25 50 75 100 Results

Search results: 25 out of 349

دراسة اثر التلدين وتغير السمك على الخصائص البصرية لاغشية اوكسيد النحاس (CuO) المحضرة بطريقة الترسيب الكيميائي الحراري == The Study of The Effect of Annealing and Thickness Variation on The Optical Properties of Copper Oxide (CuO) Thin Films Prepared By Chemical Spray Pyrolysis

Author name: هاله عبد الصاحب وادي موسى
Supervisor name: نادر فاضل حبوبي | خضير عباس مشجل
General topic: Physics
Specific topic: Thin Films
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: تتناول هذه الدراسة الخواص التركيبية والبصرية لاغشية اوكسيد النحاس CuO المحضرة بطريقة الترسيب الكيميائي الحراري على قواعد زجاجية ساخنة بدرجة حرارة اساس oC(350). ودراسة اثر التلدين بدرجات حرارية مختلفة oC (400, 450, 500, 550). وكذلك دراسة تاثير تغير السمك على الخواص البصرية للعينات مختلفة السمك (1000, 2500, 3000, 5000, 9000, 10500). فقد اظهرت نتائج حيود الاشعة السينية ان الاغشية المحضرة ذات تركيب متعدد التبلور، وقد اشتملت دراسة الخواص البصرية على تسجيل طيفي الامتصاصية والنفاذية للاغشية المحضرة لمدى الاطوال الموجية nm (300 - 900)، ومن ثم حساب فجوة الطاقة الممنوعة للانتقالات الالكترونية، اذ كانت قيم فجوة الطاقة الممنوعة للانتقال الالكتروني المباشر المسموح هي (2.85 - 1.95)eV وللانتقال غير المباشر المسموح هي (1.85 - 1.30)eV حيث ان فجوة الطاقة تقل تدريجيا كلمزااد السمك. اما عند تلدين اغشية CuO ذات السمك ( 3000) فان قيم فجوة الطاقة للانتقال المباشر المسموح هي (2.65 - 1.99)eV والانتقال غير المباشر المسموح هي (1.45 - 1.20)eV. وكذلك تم حساب ودراسة الامتصاصية، معامل الامتصاص، والانعكاسية والثوابت البصرية المتمثلة بــ(معامل الخمود، معامل الانكسار، ثابت العزل الكهربائي بجزيئة الحقيقي والخيالي، والتوصيلية الضوئية) كدالة لطاقة الفوتون، فقد اظهرت الدراسة ان التلدين وزيادة السمك للاغشية المحضرة تسبب في نقصان قيم فجوة الطاقة وزيادة في قيم كافة الثوابت البصرية. | This study deal with the structural and optical properties of copper oxide (CuO) thin films prepared on glass substrates heated to (350)oC using chemical spray pyrolysis techniques.The effect of annealing with different temperature (400, 450, 500, 550)oC have been studied. The effect of thickness variations (1000 - 10500) on the optical properties have been studied also.XRD analysis reveals that all the prepared thin films were polycrystalline. The absorbance and transmittance spectra in the wavelength range (300 - 900) nm, have been recorded the forbidden energy gap of the electronic transition were calculated, the value of the energy gap in the direct allowed transition for different thicknesses was (1.95 - 2.85)eV, and for the indirect allowed transition was (1.3 - 1.85)eV where the energy gap is decreased as the thicknesses increased. On the annealing of CuO thin films with (3000) thickness the energy gap of the direct allowed transition was varied from (1.99 - 2.65)eV and for the indirect allowed transition was varied from (1.2 - 1.45)eV The absorptance, absorption coefficient, reflectivity and the optical constants like extinction coefficient, refractive index, and dielectric constant in its two parts and conductivity as a function of photon energy were also calculated. The study raveled that annealing and the increase of thickness results in decreasing the energy gap and increase all the optical constants

استخدام انموذج Gray كدالة هدف في التصميم العكسي للعدسات المغناطيسية == USING GARY'S MODEL AS A TARGET FUNCTION IN THE INVERSE DESIGN OF MAGNETIC LENSES

Author name: هادي احمد حسين زنكنه
Supervisor name: انعام سامي حمدي | علي هادي حسن
General topic: Physics
Specific topic: Physics
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: تم اجراء دراسة حاسوبية لدراسة تاثير متغيرات الامثلية لانموذج Gray على الخواص البصرية الشيئية والمسقطية، وعلى شكل توزيعات المجال المغناطيسي والاقطاب المراد بنائها . ومن الجدير بالذكر ان دالة الهدف المستخدمة في هذا البحث ، وهي انموذج Gray، تتضمن متغيرات امثلية تمثل المعاملات الهندسية لتصميم العدسة المغناطيسية ثنائية القطب المتناظرة . وهذه المعاملات هي قطر الفتحة المحورية وعرض الفجوة الهوائية، اضافة الى معامل فيزياوي هو تهيج العدسة. اوضحت النتائج ان هناك تطابق جيد بين قيم المعاملات الهندسية كبيانات ادخال وبين نظيراتها التي يمكن الحصول عليها من الاقطاب المغناطيسية التي تم اعادة بنائها. كذلك لوحظ بان الخواص البصرية الشيئية تتحسن وبشكل ملموس كلما قلت قيم معاملات التصميم الهندسية. في حين وجد بان الامر معاكس لحالة الخواص البصرية المسقطية. وقدر تعلق الامر باثارة العدسة لوحظ بان ليس هناك اي تاثير لتغيرها على الخواص البصرية وكذلك الاقطاب المغناطيسية التي تم اعادة بنائها. اوضحت نتائج المقارنة مع باحثين اخرين ان الاجراء المستخدم في هذا البحث يمتاز بدقة عالية وكفاءة جيدة. | A computational study has been carried out to investigate the influence of the optimization variables of Gray's model on the objective and projector optical properties, and on the shape of the magnetic field distribution and the reconstructed polepieces. It should be mentioned that the target function used in this work is Gray's model which includes optimization variables representing the geometrical parameters for designing the symmetrical double polepiece magnetic lens. These parameters are the axial bore diameter and the air gape width in the addition to a physical parameter which is the lens excitation. The results have shown that there is good agreement between the values of the geometrical parameters as input data and the corresponding ones that can be obtained from the reconstructed magnetic polepieces. It has been noticed that the objective optical properties improved considerably and the values of he geometrical design parameters has been reduced. This was found to be in contrast to the case of the projector optical properties. As far as the lens excitation is concerned, it was noticed that it's variation had no effect on the optical properties and the reconstructed magnetic polepiece. A comparison with the results of other researchers had shown that the present work approach is characterized by high accuracy and good efficiency

امثلية مضخمات الالياف البصرية البارامترية == Optimization of Fiber - Optic Parametric Amplifiers

Author name: مؤيد حنون سلمان الكناني
Supervisor name: علي هادي حسن الحمداني | حسن عبد ياسر
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: في ظل ظهور تقنية انظمة الاتصالات التي تعتمد تقنية قسمة - مزج الطول الموجي (WDM) وازدياد المسافات الى عشرات الالاف من الكيلومترات في انظمة اتصالات الالياف البصرية, ظهرت الحاجة الى ايجاد مضخمات بصرية تعوض الخسارة في القدرة للاشارات المنتقلة. تنقسم المضخمات البصرية, التي تضخم الاشارة البصرية مباشرة بدون تحويلها الى اشارة كهربائية, الى عدة انواع تعتمد كل منها على عمليات فيزيائية مختلفة واوساط بصرية مختلفة. وتبرز اهمية كل نوع من هذه المضخمات حسب نوع التطبيق المستخدم لاجله. ففي مضخم الليف البصري البارامتري والذي يستخدم لتضخيم الاشارات المنتقلة لمسافات كبيرة في اتصالات الالياف البصرية, فان عملية التضخيم تعتمد اساسا على مزج الموجات الاربع (FWM). عموما, معرفة كفاءة وامثلية هذا النوع من المضخمات يتم بواسطة ثلاثة عوامل رئيسية هي : عرض حزمة الربح, التسطح, مقدار الربح المتحقق.في هذه الرسالة تم دراسة مضخم الليف البصري البارامتري (FOPA) والظواهر المتعلقة به بهدف الوصول الى افضل ظروف تشغيل. ان عملية مزج الموجات الاربع (FWM) هي اساس عمل التضخيم في هذا النوع من المضخمات وهي تعتمد على عوامل كثيرة مثل : التشتت, قدرة النبضات الداخلة, الطول الموجي للتشتت الصفري (ZDW), عامل اللاخطية, وعلاقة مركز النظام مع الطول الموجي للتشتت الصفري. بالاضافة الى تلك العوامل فان حالات الاستقطاب للنبضات الداخلة والعلاقة فيما بينها له الدور الكبير في تحديد قدرة التضخيم. ولكون الليف البصري استخدم هنا كمضخم فان ذلك يتطلب قدرة عالية لنبضات الضخ تتجاوز شرط العتبة لاستطارة رامان المحفزة (SRS) وهذا يستوجب دراسة تاثير هذه الاستطارة على طيف الربح. ان حساب خواص المضخم وفق النظرية القياسية يستوجب حل المعادلات المرتبطة للنبضات المنتشرة داخل الليف. وحيث ان هذه المعادلات غير قابلة للحل التحليلي لذلك تم استخدام تقريبات مقبولة ومبنية على اساس تقسيم الليف البصري الى مجموعة من المقاطع الصغيرة المتتالية. ووفقا لذلك تم وضع حلول تحليلية لهذه المعادلات واستنتاج صيغة تكرارية للتطبيق على اي طول لليف البصري. وذلك يتزامن مع وضع صيغ رياضية دقيقة لعامل اقتران الطور البصري والتي استخدمت مع الحلول التحليلية المقترحة لحساب طيف الربح. اثبتت النتائج التقارب الفائق بين النموذج المقترح والحل العددي. ان تطابق حالات الاستقطاب للنبضات المتفاعلة في عملية مزج الموجات الاربع يؤدي بشكل كبيرالى تعظيم عملية الربح المتحققة وهي حالة مثالية. عندما تكون حالات الاستقطاب للنبضات الداخلة ذات صيغ استقطاب عشوائية, وهي الحالة الطبيعية, فان ذلك يتطلب ادخال مفهوم ثنائي الانكسار في معادلات الارتباط للنبضات المنتشرة. من اجل ذلك فان النموذج الذي تم تطويره هنا يتضمن دراسة تاثير ثنائي الانكسار وتحليل حالات الاستقطاب في فضاءي جونز وستوكس لكلا النوعين من المضخم, باستخدام نبضتي ضخ او نبضة ضخ واحدة. حقق النموذج المقترح تطابقا مع النماذج المعروفة والتي تعتمد في الغالب على الحلول العددية.عندما تتجاوز قدرة الضخ شرط عتبة معين فانه يتوجب ادخال تاثير استطارة رامان المحفزة في معادلات الارتباط للنبضات المنتشرة. ومن خلال دراسة دالة استجابة رامان فان تاثيرات هذه الاستطارة يمكن من اضافتها والتوصل الى نظام معادلات جديد, حيث افترض ان حالات الاستقطاب متطابقة لتبسيط عملية التحليل. هذا النظام غير قابل للحل تحليليا ولذلك تم حله عدديا باستخدام طريقة رانج كوتا (Runge - Kutta). اظهرت النتائج تطابقا مع السلوك في حالة النظرية القياسية مع حدوث تغيرات معينة بسبب تاثير الاستطارة.

تاثير الحركة الخطية والاهتزازية على كفاءة الصورة بوجود الزيوغ == THE EFFECT OF VIBRATION AND LINEAR MOTION ON THE IMAGE EFFICIENCY IN THE PRESENCE OF ABERRATION

Author name: مهند عادل مصطفى الصياح
Supervisor name: قصي خالد احمد | جمال عبد الجبار حسن
General topic: Physics
Specific topic: Image Processing
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: ان الهدف الذي اجريت له هذه الدراسة هو معرفة اسلوب توزيع الشدة في صورة جسم متاثر بحركة خطية او بحركة اهتزازية في حالة استعمال الاضاءة المتشاكه عبر فتحة دائرية، وذلك عن طريق استخدام معادلتين منفصلتين لتوزيع الشدة في الصورة متضمنة لهاتين الحركتين ومتمثلتين بقيم مختلفة لعاملي الحركة الخطية والحركة الاهتزازية. وتعتبر هاتين المعادلتين مهمة في الدراسة النظرية والعملية لاي نوع وكمية زيغ موجودة في النظام البصري.تم اولا ايجاد الشدة في نظام بصري يحتوي على خطا بؤري وعلى زيغ كروي من المرتبة الثالثة والخامسة ومرتبته العليا وكذلك على زيغ مذنبي بكميات مختلفة، وادخلت بعدها قيم عاملي الحركة الخطية والحركة الاهتزازية كل على حدة لمعرفة مدى تاثير ذلك على توزيع الشدة في الصورة ومن ثم تم تحديد قيمة عامل الحركة المؤثر على تلك الشدة والتي من الممكن ان تكون عندها الشدة مقبولة حسب معيار ستريل.كذلك تم ايجاد الشدة في الحالة المثلى للزيغ الكروي من المرتبة الثالثة والخامسة بوجود الخطا البؤري وتم حساب مدى تاثير الحركة الخطية او الاهتزازية على نظام بصري بهذه المواصفات. | The aim of this study is to know the way of intensity distribution in a body image effected by a linear and vibration motions in case of using the coherent illumination through a circular aperture by using two separated equations for intensity distribution in the image including the two effected motions that are represented by two different values for the linear and vibration motions factors. Those two equations are considered important in the theoretical and practical studies for any kind and amount of aberration in the optical system. First of all the intensity of an optical system has been found, this system contains a focal error and a 3rd, 5th and highest order of spherical aberration. Also it contains a coma aberration, all in different values after that the values of the linear and vibration motions factors were inserted separately to know the effect on the intensity distribution in the image, the factor of the affected motion on this intensity has been specified that at this value the intensity could be accepted according to strehl criterion. Also the ideal intensity for the spherical aberration for the 3rd, 5th and the highest order has been calculated in presence of focal error, also the affection of the linear or vibration motion on the optical system with these specifications was calculated

دراسة خصائص الحزمة الالكترونية على صور التاثير المراتي == Investigation of the Electron Beam characteristics on the Mirror Effect Images

Author name: مصطفى محيسن عبد
Supervisor name: حسن نوري عبد الوهاب العبيدي
General topic: Physics
Specific topic: Electronics Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: اجريت دراسة نظرية بمساعدة الحاسوب لوصف سلوك الكترون معجل نحو عينة عازلة مشحونة لانتاج صور المراة الالكترونية. حيث تم تقديم معالجة رياضية بسيطة لسلوك الالكترون الماسح بدلالة جهد الحزمة وجهد النموذج. ان معادلة الحركة للالكترون الساقط راسيا اشتقت بدلالة قانون حفظ الطاقة. تكمن اهمية الاشتقاق الرياضي في كونه يربط معلمات حزمة المسح من جانب بمعلمات التشعيع من اخر. تم الوصول الى هذا المنجز من خلال تبني انموذجي الشحنة النقطية والقرص المشحون. اظهرت النتائج بان فهم وتفسير جيد لسلوك الالكترون الماسح الفيزيائي يمكن استخلاصه. بناء على ذلك فان تاثير قطر وتيار الحزمة جهد المسح مسافة التشغيل، الشحنة المتراكمة وابعاد المنطقة المشععة على صور مراة الالكترون بالامكان تحديدها. النتائج اظهرت بوضوح ان تيار الحزمة الالكترونية له تاثير كبير على الصور المر اتية المنتجة بالمقارنة مع معلمات الحزمة الاخرى. وتبين ان تيار الحزمة يمكن ان يستخدم بالتحكم بصور المراة فقط عند القيم الدنيا من جهد المسح. علاوة على ذلك اظهرت المعالجة المستخدمة في هذا العمل القدرة على انتاج وسيلة لحساب الشحنة المتراكمة. وبينت نتائج هذه الطريقة اتفاق ممتاز مع بعض النتائج التي تم نشرها. | A computer - aided theoretical investigation is conducted to describe the behavior of an accelerated probing electron oriented toward a charged insulator sample and hence producing electron mirror images. A simple mathematical manipulation for the scanning electron behavior in terms of the beam and surface potentials is presented. The equation of motion of this head - incident electron is derived in terms of the energy conservation law. The importance of the derived expression is that it has relating scanning beam parameters, on the one hand, and the parameters of the irradiation on the other hand. This obligation has achieved through adopting of the disc and point charged models. Results have shown that best comprehend and interpret for the physical behaviors of a scanning electron can be extracted. Hence the influence of a beam (size and current), scanning potential, working distance, trapped charge and dimension of the irradiated area on the electron mirror images are defined. The results have clearly shown that the electron beam current has a considerable effect on the deduced mirror images in comparison with the other beam parameters. It is found that the beam current may be used to control mirror images only in the lower values of scanning potential. Furthermore, the introduced manipulation shows an ability to produce a method for calculating the trapped charge. However, the result of this method shows an excellent agreement with some of the published experimental one

ايجاد تراكيز اليورانيوم والرادون في ترب لمناطق من جنوب شرق بغداد باستخدام كاشف الاثر النووي (CR - 39) == Determine Uranium and Radon Concentration in Soil Taken from Area Situated in South East of Baghdad by Using the Nuclear Track Detector(CR - 39)

Author name: محمود سالم كريم
Supervisor name: نجيبة عبد الله حسن الحمداني | ندى فاضل توفيق
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: يستهدف البحث ايجاد تراكيز اليورانيوم وغازالرادون في التربة لمناطق من جنوب شرق بغداد(الوردية والتويثة وحي الرياض) للتعرف على مدى تلوث تلك المناطق باليورانيوم جراء العبث بالمصادر المشعة التابعة لمنظمة الطاقة الذرية. ان هذه الدراسة تعد من الدراسات البيئية المهمة في مجال التعرف على مدى التلوث البيئي للمناطق السكنية القريبة من منظمة الطاقة الذرية بعد احداث الحرب على العراق عام (2003). تضمن الجزء الاول ايجاد تراكيز اليورانيوم في التربة باستخدام تقنيةعد اثار شظايا الانشطارفي كاشف(CR - 39) الناتجة من انشطار نواة U238 بالنيوترونات السريعة من المصدر النيوتروني(241 Am - Be) . اما الجزء الثاني فقد تضمن ايجاد تراكيز غاز الرادون في التربة باستخدام تقنية عد اثار جسيمات الفا المنبعثة من غاز الرادون في كاشف الاثر (CR - 39) . تم تحديد التراكيز بالحسابات المعتمدة على المقارنة مع النماذج القياسية, وقد اوضحت النتائج التي حصلناعليها ان اعلى تركيز لليورانيوم كان في منطقة الوردية(5.3 ppm) تليها التويثة(3.45 ppm) فحي الرياض (3.34 ppm) وان اعلى تركيز لغازالرادون كان في منطقة الوردية 697.18 Bq/m3) ) يليها حي الرياض(163.54 Bq/m3) فالتويثة (119.17 Bq/m3) ويتضح تلوث منطقة الوردية باليورانيوم والرادون اكثرمن بقية المناطق | The aim of research is to determine Uranium and Radon concentration in soil samples taken from area situated in southeast of Baghdad (AL - Wardia, AL - Twitha and Haiy AL - Ryaid) to determine the level of concentration of these areas with Uranium this contamination was due to the mis - handeled of the radioactive sources of the Atomic Energy Oganization after the war Iraq in(2003).The first part consists the determination of Uranium concetration in soil samples using fission tracks registration in (CR - 39) detector obtained by the bombardment of U238 with fast neutrons from (241 Am - Be) neutron source.The second part concerns with the determination of Radon concentration in soil by using alpha - emitters registration which emittfrom Radon gas in (CR - 39) detector.The concentration values were calculated by a comparsion with standard samples.The results obtained shows that the Uranium concentrations in AL - Wardia (5.3 ppm) after it in AL - Twitha (3.45 ppm)and Haiy AL - Ryaid (3.34 ppm) and the higher concentrations to Radon gas in AL - Wardia (697.18 Bq/m3) after it in Haiy AL - Ryaid (163.54 Bq/m3) and AL - Twitha (119.17 Bq/m3) we show that Uranium and Radon concentration in AL - Wardia is higher than the other regions.

دراسة النشاط الاشعاعي وانبعاث غاز الرادون في بعض المحافظات العراقية == Study of Radioactivity and Radon gas Emanation in Some Iraqi Governorates

Author name: محمود سالم كريم الركابي
Supervisor name: ندى فاضل توفيق | حازم لويس منصور
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: الاشعاع جزء من البيئة الذي نعيش فيه. يتعرض جميع الناس للاشعاع من الهواء والتربة والماء. وان الجزء الاكبر من التعرض الطبيعي للاشعاع ينتج من غاز مشع يدعى الرادون. الدراسة الحالية تتضمن خمسة اجزاء. الجزء الاول تضمن قياس تراكيز الرادون وايجاد قيم بعض الاعلومات المتعلقة بتركيز الرادون مثل (CPPP, AED, EP, PAEC) في الهواء داخل عشرون منزل لكل محافظة من محافظات (بغداد , الانبار , ذي قار) (بواقع اربع نماذج لكل منزل) .تم قياس تراكيز الرادون باستخدام كاشف الاثر النووي .(CR - 39) بينت النتائج ان معدل تركيز غاز الرادون داخل المنازل في محافظة بغداد يساوي (Bq/m3 51.688±16.7) ولمحافظة ذي قار يساوي (153.730±42.4 Bq/m3) وهما اقل من المدى المسموح والموصي به من قبل اللجنة الدولية للوقاية من الاشعاع (ICRP) (200 - 300 Bq/m3) لعام (2009(, بينما وجد ان معدل تراكيز غاز الرادون داخل المنازل في محافظة الانبار يساوي ( (512.975±74.5 Bq/m3وهو اعلى من المدى المسموح والموصي به من قبل اللجنة الدولية للوقاية من الاشعاع لعام 2009. تضمن الجزء الثاني من هذه الدراسة قياس تراكيز غاز الرادون في نماذج من التربة وايجاد قيم بعض الاعلومات المتعلقة بتركيز الرادون مثل (RER). تمت دراسة عشرين موقعا لكل محافظة من محافظات (بغداد , ذي قار, الانبار) (بواقع اربع نماذج لكل موقع) وذلك باستخدام تقنية القدح لتربة سطحية ولتربة من عمق (10 سم). بينت النتائج الحالية ان معدل تركيز غاز الرادون في نماذج التربة السطحية في محافظة بغداد يساوي (Bq/m3 24.337±8.7) ولمحافظة الانبار يساوي (81.287±17.7 Bq/m3) ولمحافظة ذي قار يساوي ((75.875±21.8 Bq/m3. كما وجد بان معدل تركيز غاز الرادون في نماذج التربة لعمق (10 سم) في محافظة بغداد كان يساوي (Bq/m3 21.237±5.1) ولمحافظة الانبار يساوي ((71.35±20.85 Bq/m3 ولمحافظة ذي قار يساوي ((66.703±14.8 Bq/m3. النتائج الحالية لجميع المحافظات المدروسة (بغداد , الانبار , ذي قار) بينت ان تراكيز الرادون في نماذج التربة السطحية وكذلك لعمق (10 سم) هي اقل من الحد المسموح والموصي به من قبل اللجنة الدولية للوقاية من الاشعاع لعام (1993) والذي يساوي (200 Bq/m3) , كما وجد ان قيم تركيز غاز الرادون وقيم(RER) في التربة السطحية هي بصورة عامة اكبر من قيمتها عند العمق (10سم).في الجزء الثالث الذي تضمن قياس تراكيز غاز الرادون وايجاد قيم بعض الاعلومات المتعلقة بتركيز الرادون مثل .(Cd, RER, AED) في نماذج مياه الشرب (ماء حنفية) تم اخذه مباشرة من 20 منزل لكل محافظة من محافظات (بغداد,الانبار, ذي قار) (بواقع اربع نماذج لكل موقع) وذلك باستخدام تقنية عد اثار جسيمات الفا المنبعثة من غاز الرادون في كاشف الاثر النووي(CR - 39) . بينت النتائج الحالية ان معدل تركيز غاز الرادون في نماذج مياه الحنفية في محافظة بغداد يساوي (Bq/L 0.135±0.03) ولمحافظة الانبار يساوي (0.139±0.03 Bq/L) ولمحافظة ذي قار يساوي ((0.175±0.03 Bq/L. النتائج الحالية لجميع المحافظات المدروسة (بغداد , الانبار, ذي قار) بينت ان تراكيز غاز الرادون في نماذج ماء الحنفية للمحافظات المدروسة هي اقل من الحد المسموح والموصي به من قبل الوكالة الدولية لحماية البيئة (USEPA) لعام (2012) والذي يساوي (11.1 Bq/L).الجزء الرابع من هذه الدراسة تضمن قياس تراكيز اليورانيوم - 235 لعشرين نموذج تربة سطحية لمناطق منتخبة لكل محافظة من محافظات (بغداد , الانبار , ذي قار. اوضحت النتائج الحالية ان معدل تراكيز اليورانيوم لجميع نماذج التربة السطحية المدروسة في محافظة بغداد يساوي (ppm 1.371±0.3) ولمحافظة الانبار يساوي ((3.381±0.62 ppm ولمحافظة ذي قار يساوي ((2.077±0.4 ppm. النتائج الحالية لجميع المحافظات المدروسة كانت اقل من الحد المسموح والموصى به من قبل اللجنة العلمية للامم المتحدة لتاثيرات الاشعاع الذري (UNSCEAR) لعام(1993) والذي يساوي (11.7 ppm). الجزء الخامس من هذه الدراسة تضمن قياس تراكيز النشاط الاشعاعي النوعي وايجاد قيم بعض الاعلومات المتعلقة بتركيز الرادون مثل [Hex, Hin , Iɣ , EAD, (AED) out , (AED) in , DƔ , Raeq ]لخمس نماذج تربة لمناطق منتخبة لكل محافظة من محافظات (بغداد , الانبار , ذي قار) وذلك باستخدام كاشف الجرمانيوم عالي النقاوة (HPGe). بينت النتائج الحالية ان معدل تركيز النشاط الاشعاعي النوعي بالنسبة الى (238U,232Th,40K, 137Cs), لمحافظة بغداد كان يساوي (4.02±1.5 Bq/kg, 104.26±37.3 Bq/kg, 11.54±3.2 Bq/kg , 14.09±3.3 Bq/kg) على التوالي, ولمحافظة ذي قار كان يساوي (3.15±1.5 Bq/kg , 304.6±69.1 Bq/kg , 22.7±4.1 Bq/kg , 29.2±5.1 Bq/kg) على التوالي , وهم اقل من الحدود المسموحة والموصى بها من قبل اللجنة العلمية للامم المتحدة لتاثيرات الاشعاع الذري لعامي (2000 , 1993) والتي تساوي (Bq/kg 35 ,Bq/kg 30 , Bq/kg 400 ,Bq/kg 14.8) على التوالي, بينما وجد بان معدل تركيز النشاط الاشعاعي النوعي بالنسبة الى (238U ,232Th,40K, 137Cs), لمحافظة الانبار كان يساوي (51.88±6.4 Bq/kg , ,38.72±2.4 Bq/kg 615.36±49.7 Bq/kg (17.43±1.3 Bq/kg) على التوالي, وهم اعلى من الحدود المسموحة والموصى بها من قبل اللجنة العلمية للامم المتحدة لتاثيرات الاشعاع الذري(UNSCEAR) لعامي(2000 , 1993). واخيرا نود ان نبين بان الدراسة الحالية تعتبر من الدراسات المهمة جدا والحيوية لانها تتعلق بصحة وسلامة البشر في المقام الاول, بالاضافة الى ان بعضا من نتائج الدراسة الحالية تقدم لاول مرة وحسب علم الباحثون. | Radiation is a part of the environment in which we live. All people receive radiation exposure from occurring radioactivity in air , soil and water. The largest fraction of the natural radiation exposure we receive comes from a radioactive gas, called radon.The present study consists of five parts. The first part of the present study includes the indoor air radon gas concentrations measurements and the determination of some other related parameters such as (PAEC, EP, AED and CPPP) which was carried out in twenty dwellings for each governorate studied (Baghdad, Anbar and Thi - Qar) (with four samples in each dwellings). Radon concentrations were determined by using (CR - 39) nuclear track detectors, the results have shown that, the average radon gas concentrations indoor dwellings in Baghdad governorate was equal to (51.688±16.7 Bq/m3 (and in Thi - Qar governorate was equal to (153.730±42.4 Bq/m3), which were less than even the lower limit of the recommended range (200 - 300 Bq/m3) given by (ICRP, 2009). While the average radon gas concentration in indoor dwellings in Anbar governorate was found to be equal to (512.975±74.5 Bq/m3) which was higher than the limit of the recommended range given by (ICRP, 2009). The second part of the present study was to measure radon gas concentrations and the determination of some other related parameter such as (RER) for twenty soil locations for each governorate (Baghdad, Anbar and Thi - Qar) (with four samples in each location) by using the sealed - cup technique for depths (0,10 cm). The results have shown that, the average radon gas concentrations in surface soil samples in Baghdad governorate was equal to (24.337±8.7 Bq/m3( , in Anbar governorate was equal to (81.287±17.7 Bq/m3) and in Thi - Qar governorate was equal to (75.875±21.8 Bq/m3) . The average radon gas concentrations in soil for the depth (10 cm) in Baghdad governorate was found to be equal to (21.237±5.1 Bq/m3 (, in Anbar governorate was equal to (71.35±20.85 Bq/m3) and in Thi - Qar governorate was equal to (66.703±14.8 Bq/m3). The present results in all the three governorates studied (Baghdad, Anbar and Thi - Qar) have shown that the radon gas concentrations in surface soil samples and for depth (10 cm) in soil were less than the recommended value (200 Bq/m3) given by (ICRP, 1993), with the results for the depth (10 cm) were , in general , less than their corresponding values in surface soil samples .The third part of the present study was to measure the radon gas concentrations and the determination of some other related parameters such as (AED, RER and Cd) concentrations in water samples which were taken directly from networks water (tap water) in twenty dwellings for all the three governorates studied (Baghdad, Anbar and Thi - Qar) (with four samples in each dwellings) by using (CR - 39) nuclear track detectors. The results have shown that, the average radon gas concentrations in tap water samples in Baghdad governorate was found to be equal to (0.135±0.03 Bq/L(, and in Anbar governorate was equal to (0.139±0.03 Bq/L) and in Thi - Qar governorate was equal to (0.175±0.03 Bq/L). The present results in all the three governorates studied (Baghdad, Anbar and Thi - Qar) have shown that the radon gas concentrations in tap water samples were less than the recommended value (11.1 Bq/L) given by (USEPA, 2012).The fourth part of the present study was to measure uranium - 235 concentrations in twenty surface soil samples for selected regions in each of the three governorates studied (Baghdad, Anbar and Thi - Qar). The results have shown that, the mean uranium concentrations in the studied surface soil samples in Baghdad governorate was found to be equal to (1.371±0.3 ppm (, in Anbar governorate was equal to (3.381±0.62 ppm) and in Thi - Qar governorate was equal to (2.077±0.4 ppm) ,which were less than the recommended value of (11.7 ppm) given by (UNSCEAR, 1993).The fifth part of the present study was concerned with the measurements of the specific activity and the determination of some other related parameters such as (Raeq ,DƔ, AEDin , AEDout ,EAD , Iɣ , Hin and Hex). in five soil samples for selected regions in each of the three governorate studied (Baghdad, Anbar and Thi - Qar) by using high purity germanium (HPGe) detector. The results have shown that, the average specific activity of (238U, 232Th, 40K and 137Cs) in Baghdad governorate which were (14.09±3.3 Bq/kg, 11.54±3.2 Bq/kg, 104.26±37.3 Bq/kg and 4.02±1.5 Bq/kg) ,respectively, and Thi - Qar governorates which were (29.2±5.1 Bq/kg, 22.7±4.1 Bq/kg, 304.6±69.1 Bq/kg and 3.15±1.05 Bq/kg) , respectively, were less than the recommended values of specific activity of (238U, 232Th, 40K and 137Cs) which were (35 Bq/kg ,30 Bq/kg, 400 Bq/kg and 14.8Bq/kg) ,respectively, given by (UNSCEAR, 2000 and UNSCEAR, 1993), while for Anbar governorate the average specific activity of (238U, 232Th, 40K and 137Cs) which were (51.88±6.4 Bq/kg , 38.72±2.4 Bq/kg , 615.36±49.7 Bq/kg and 17.43±1.3 Bq/kg), respectively, were found to be higher than the recommended values of specific activity given by (UNSCEAR, 2000 and UNSCEAR, 1993).Finally, we would like to mention that the present study is considered to be very important and vital because it is concerned with people health and safety in the first place, and to the best of our knowledge , some of the present results were presented for the first time

تحضير طابوق حراري واطئ الكثافة من مخلفات محلية == Preparing Heating Brick of Low Density From Local Scrap .

Author name: محمد عبد الرضا وناس الوائلي
Supervisor name: خضير عباس مشجل | فاضل عبد رسن
General topic: Physics
Specific topic: Physics
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: تم في هذا البحث تحضير طابوق حراري واطئ الكثافة حقق خواص ليلائم استعماله في تبطين سقوف الافران الحرارية . حضرت خلطات من (كاؤولين دويخله, والالومينا Alumina وكاربونات الكالسيوم CaCo3 وخامس اوكسيد الفسفور ,ومواد مخلفات محلية مثل السبوس ونشارة الخشب والفلين ) واضيفت بنسب خلط معينة . حضرت هذه الخلطات بظروف طحن وكبس وتجفيف وحرق بدرجة حرارة معروفة حيث تم اختيارها لضمان الحصول على طابوق حراري عازل خفيف الوزن ويحقق المواصفات المطلوبة.اعتمدت ثلاث خلطات ,عرفت بالرموز[ M1 ,M2 ,M3 ] وشكلت نماذجها تحت ظروف محددة وثلاث درجات للحرق وهي C (900 , 1000 , 1100) لدراسة تاثير نسب الخلط وتاثير المواد المضافة من مخلفات محلية ودرجة حرارة الحرق بغية الحصول على افضل نتائج تحقق مواصفة الطابوق واطئ الكثافة .حيث درست المواصفة لنعرف من خلالها الخواص الميكانيكية والخواص الفيزياوية.تم الحصول او التوصل الى طابوق حراري واطئ الكثافة بالمواصفات التالية : 1. متانة انضغاط Mpa (7.437)2. توصيلية حرارية 0.466) watt/m.co )3. كثافة حجمية gm/cm3(0.930) وقد وجدت هذة المواصفات عند العينةF23 والمحضرة من( %70 M2 + 30% نشارة خشب + سائل P2O5 مخفف) . حيث تقع هذه القيم ضمن مدى المواصفة العالمية. | In this research , it happens to prepare heating brick of low density . Its properties are made to suit its use in lining the roofs of the heating furance . Mixtures of ( Kaoline Doukhla , Alumina , Calcium carbonate CaCo3 , phosphor Oxide 5 , and other local scrap, like wood chips and cork ) are prepared and added with certain rates of mixing . these mixtures have been prepared under the conditions of pressing , grinding , drying , and burning with known degree of heating . These degrees are chosen to guarantee obtaining of heating , insulator , and lightes - Weigh brick according to the required specifications .Three mixtures have been adopted , knew as [ M1, M2 , M3 ] . Their samples are formed under certain conditions and of three degrees of burring , they are ( 900 , 1000 , 1100) oc for the aim of studying the influence of mixing rates and the affect of the added materials of local scrap and the degrees of burning for the purpose of getting the best results that meet the specifications of low density brick .The specifications have been studied to know their mechanical and physical properties . We have got a heating low density heating brick with these properties : 1 - Compressing Strength ( 7.437 ) Mpa 2 - Heating Conductivity ( 0 . 466 ) Watt/ m.oc. 3 - Bulk Density ( 0 . 930 ) gm/ cm3 . These specifications were founded at the sample F23 that has been prepared from( 70% M2 + 30 % Wood chips + P2O5 liquid) . These results are within the international specifications . In this research , it happens to prepare heating brick of low density . Its properties are made to suit its use in lining the roofs of the heating furance . Mixtures of ( Kaoline Doukhla , Alumina , Calcium carbonate CaCo3 , phosphor Oxide 5 , and other local scrap, like wood chips and cork ) are prepared and added with certain rates of mixing . these mixtures have been prepared under the conditions of pressing , grinding , drying , and burning with known degree of heating . These degrees are chosen to guarantee obtaining of heating , insulator , and lightes - Weigh brick according to the required specifications .Three mixtures have been adopted , knew as [ M1, M2 , M3 ] . Their samples are formed under certain conditions and of three degrees of burring , they are ( 900 , 1000 , 1100) oc for the aim of studying the influence of mixing rates and the affect of the added materials of local scrap and the degrees of burning for the purpose of getting the best results that meet the specifications of low density brick .The specifications have been studied to know their mechanical and physical properties . We have got a heating low density heating brick with these properties : 1 - Compressing Strength ( 7.437 ) Mpa 2 - Heating Conductivity ( 0 . 466 ) Watt/ m.oc. 3 - Bulk Density ( 0 . 930 ) gm/ cm3 . These specifications were founded at the sample F23 that has been prepared from( 70% M2 + 30 % Wood chips + P2O5 liquid) . These results are within the international specifications . In this research , it happens to prepare heating brick of low density . Its properties are made to suit its use in lining the roofs of the heating furance . Mixtures of ( Kaoline Doukhla , Alumina , Calcium carbonate CaCo3 , phosphor Oxide 5 , and other local scrap, like wood chips and cork ) are prepared and added with certain rates of mixing . these mixtures have been prepared under the conditions of pressing , grinding , drying , and burning with known degree of heating . These degrees are chosen to guarantee obtaining of heating , insulator , and lightes - Weigh brick according to the required specifications .Three mixtures have been adopted , knew as [ M1, M2 , M3 ] . Their samples are formed under certain conditions and of three degrees of burring , they are ( 900 , 1000 , 1100) oc for the aim of studying the influence of mixing rates and the affect of the added materials of local scrap and the degrees of burning for the purpose of getting the best results that meet the specifications of low density brick .The specifications have been studied to know their mechanical and physical properties . We have got a heating low density heating brick with these properties : 1 - Compressing Strength ( 7.437 ) Mpa 2 - Heating Conductivity ( 0 . 466 ) Watt/ m.oc. 3 - Bulk Density ( 0 . 930 ) gm/ cm3 . These specifications were founded at the sample F23 that has been prepared from( 70% M2 + 30 % Wood chips + P2O5 liquid) . These results are within the international specifications .

استكشاف الجهد لانتاج صور التاثير المراتي الالكتروني من عينات بيولوجية == Exploring the Potential for Producing Electron Mirror Effect Images from Biological Samples

Author name: محمد شاكر موسى
Supervisor name: حسن نوري عبد الوهاب العبيدي | دنيلا كانديا
General topic: Physics
Specific topic: Electronics Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: An experimental study which is based on theoretical aspects is adopted to investigate the most important parameters that control the electron mirror effect phenomenon in biological samples. The machine that has been used to achieve the experiments is LEO 1430 scanning electron microscope. All the experiments are executed in room temperature and fixed 5*10 - 5 mbar of pressure and 29 mm of working distance with an average 35%of humidity. A mathematical description of the charging process and trapped charge is presented. Although this modulation is based on simple ideas of the electricity, it has a good agreement with experimental results. Different types of biological samples have been used to investigate mirror effect phenomenon occurs in these samples. Where in some samples mirror effect appears significantly while there is no sign of charge trapping in other samples. The main sample that has been adopted for exploring the phenomenon is Rotula, which belongs to the buccal apparatus of sea urchin, due to its relatively large area and thickness in comparison to other available specimens and the stability of the mirror effect. Different locations are chosen in each side of Rotula to compare among them. As the most effective parameter in this phenomenon is charge trapping and detrapping, the charge accumulation on the sample surface is measured by two different methods namely magnification factor method (MFM) and disappearing method (DM). The MFM is used to investigate five different locations of the inhomogeneous oral side, while the homogeneous aboral side is used to compare between the values of the trapped charge using MFM and DM. The dielectric constant of the aboral side of Rotula has been calculated by making use of the theoretical aspects of MFM and DM.

خصائص اغشية اوكسيد الكادميوم المشوب بالانديوم ذات التركيب النانوي والمحضرة بطريقة الترسيب بالليزر النبضي لتطبيق المتحسس الغازي == Characterization of In Doped CdO Nanostructure Prepared by PLD for Gas Sensor Application

Author name: مازن حامد حسن
Supervisor name: علي احمد يوسف الشمري
General topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: تم بهذه العمل دراسة نمو الاغشية بظروف ترسيب مختلفة لفهم تاثير طريقة التحضير على خصائص الغشاء ولتحديد افضل الظروف التحضيرية وتتمثل بدرجة الحرارة (400°C), وضغط الاوكسجين(2×10 - 1) mbar وكثافة طاقة الليزر الساقطة 1.8 J/cm2 باختلاف محتوى اوكسيد الانديوم (7% ,5%, 3%, 1%, 0) بالتردد المضاعف لليزر النيديميوم - ياك الذي يعمل بتقنية عامل النوعية عند الطول الموجي 532nm بمعدل تكرارية (1 - 6) هرتز وامد نبضة 10 نانوثانية لترسيب اغشية اوكسيد كادميوم انديوم النانوية على قواعد مختلفة من الكوارتز والالومينا بسمك 150±10 نانومتر وعدد نبضات 150 نبضة لكل الاغشية باختلاف ظروف الترسيب. الخصائص التركيبية للاشعة السينية تظهر اغشية رقيقة لتركيب مكعب متعدد التبلور ذات اتجاة سائد (111) باتجاة موازي للسطح, عند نمو غشاء اوكسيد كادميوم انديوم على قواعد الالومينا تم الحصول على اصغر حجم حبيبي 16.52 nm عند نسبة التشويب 7%)) . مما يدل على تبلور افضل للغشاء وهذا ماتوضح ايضا من صورمجهرالقوة الذرية. تم دراسة طوبوغرافية السطح باستخدام مجهر القوى الذرية (AFM) . تظهر العينات ذات تركيب حبيبي وان حجم الحبيبات تتناقص مع زيادة نسب التشويب واصغر حجم حبيبي (79.11nm) و(82.99nm) تتحقق عند نسب تشويب (7%) لقواعد الكوارتز والالومنيا على الترتيب, من صور مجهر الالكترون الماسح تم الحصول على حبيبات كروية صغيرة تتراوح nm (60 - 80 ) للاغشية النقية والمشوبة. قياس الخصائص البصرية باستخدام مطياف الاشعة المرئية وفوق البنفسجية . الاغشية الرقيقة لها نفاذية عالية في المنطقة المرئية بمعدل نفاذية اعلى من (93%). وبفجوة طاقة بصرية تراوحت بين (3.25 - 3.15eV) . كما تم حساب فجوة الطاقة البصرية باستخدام جهاز مطياف الضيائية (PL) وكانت النتائج مقاربة لما تم الحصول عليه من قياسات طيف الاشعة المرئية وفوق البنفسجية, وظهور ازاحات بسيطة باتجاة الطول الازرق في قمم الامتصاص مع زيادة نسب التشويب. نتائج شدة الاستضاءة الفوتونية للاغشية المصنعة قيست ضمن المدى (200 - 900) nm,حيث هيجت الاغشية عند طول موجي (270nm) , اعظم شدة ظهرت عند المنطقة البنفسجية عند طول موجي (445.2nm). الخصائص الكهربائية تتضمن حساب التوصلية المستمرة والتي تظهر طاقة للتنشيط لجميع الاغشية . وطاقة التنشيط (0.228eV) و(0.234eV) للاغشية النقية على قواعد الكوارتز والالومنيا , واعلى طاقة تنشيط (0.515eV) تتحقق عند نسبة تشويب (3%) لقواعد الكوارتز و(0.42eV) تتحقق عند نسبة تشويب(7%) لقواعد الالومنيا. دراسة تاثير هول تظهر شبه موصل من نوع (n - type) . قياس التحسسية للاغشية (CdO) النقية والمشوب لخليط من غاز ثاني اوكسيد النتروجين والهواء في منظومة مصنعة محليا , تم اختبار جميع الاغشية لنسبة الخلط (3% NO2 : air) وفولتية تحفيز (3V). افضل درجة حرارة عمل للمتحسس كانت عند درجات الحرارة (200 - 225)oC للاغشية النقية وتتناقص الى oC (175 - 200) للاغشية المشوبة . اعظم تحسس كانت (263.97%) وسرعة استجابة زمنية (13.5s) وزمن استرداد (15.5s) تتحقق عند نسبة تشويب (3%), والتحسسية تتناقص مع زيادة نسب التشويب. | In this work, films have been grown under various deposition conditions in order to understand the effect of processing on the film properties and to specify the optimum condition, namely substrate at temperatures of (400°C), oxygen pressure (2×10 - 1) mbar, laser fluence 1.8 J/cm2, and with different In2O3 contents (0, 1%, 3%, 5% and 7%) using double frequency Q - switching Nd : YAG laser beam (wavelength 532nm), repetition rate (1 - 6) Hz and the pulse duration of (10ns), to deposit CdO : In films on sapphire α - Al2O3 (006) and quartz substrates with thickness of about 150±10 nm for all CdO : In nanofilms at different deposition condition and the number of laser pulses was 150 pulses. The x - ray diffraction (XRD) analysis was used to determine structural properties of the prepared films,the structure of the cadmium oxide has a cubic unit cell with highly orientated in the (111) direction. In the CdO : In films on sapphire substrate with a smallest grain size (16.52nm) are achieved at a ratio of doping (7%). This indicates the superior crystallinity of the film, which also has observed from the atomic force microscopy (AFM) images. The surface morphology of the deposit materials has been studied by using AFM. The samples are displayed granular structure, the grain sizes have been decreased with increasing of doping concentration ratio, the smallest grain size equal to (79.11 nm) and (82.99nm) are achieved at a ratio of doping (7%) for quartz and sapphire α - Al2O3 substrate, respectively, from the scanning electron microscope (SEM) images of the pure CdO and CdO : In films are composed of spherical grains of small with the size (60 - 80) nm . UV - VIS transmittance measurements have been shown that the films are highly transparent in the visible wavelength region, with an average transmittance of (93%). The optical band gap of the films has been found to be in the range (3.25 - 3.15) eV according to the nanostructure films by use photoluminescence (PL), the same results of energy gap value with simple difference and with small blue shift in peaks with increase of doped ratio, been found to be 2.45eV for pure CdO and it varies differently, in addition, the photoluminescence spectrum were analysed between (200 - 900) nm, all the films shown two kinds of luminescence transitions involved when the thin film is excited with wavelength 270 nm, the greatest intensities have been demonstrated in the near UV - Vis spectrum (445.2 nm). The activation energy for pure CdO was (0.228 eV) with quartz substrates, while (0.234eV) with α - Al2O3 substrates, this value decreases to (0.515 eV) when the film doping at (3%) with quartz substrates and (0.42eV) with α - Al2O3 substrates. The prepare films have been determined as an that n - type semiconductor films by the hall Effect measurements. The sensitivity measurements behavior measurements of CdO films with different doping concentrations of In2O3 under (3% NO2 : air) and bias voltage (3Volt). The optimal operating temperature is found to be 200 - 225°C for pure CdO and decreases to (175 - 200) °C for the samples. The maximum sensitivity is equal to (263.97%) with response time (13.5s) and recovery time (15.5s) was achieved at (3%) doping concentration level for α - Al2O3 substrate. The sensitivity of samples has been decreased when increasing of doping level

دراسة الخصائص التركيبية وتاثير السمك على الخصائص البصرية لاغشية ZnO الرقيقة المحضرة بطريقة التحلل الكيميائي الحراري

Author name: كامران ياسين قادر
Supervisor name: نادر فاضل حبوبي
General topic: Physics
Specific topic: Thin Films
Degree: Doctorate
Language: Arabic
University location: Baghdad
First pages:
Abstract: تم في هذا البحث دراسة الخصائص التركيبية وتاثير السمك على الخصائص البصرية لاغشية (ZnO) الرقيقة المحضرة بطريقة التحلل الكيميائي الحراري ، اذ ان الاغشية المحضرة هي بسمك(2000,3000,4000,5000,6000,7000)Ǻ مرسبة على قواعد زجاجية بدرجة حرارة . اظهرت نتائج حيود الاشعة السينية لاغشية اوكسيد الخارصين ان هذه الاغشية متعددة التبلور ومن النوع السداسي ولها اتجاه تفضيلي هو (002). اشتملت دراسة الخواص البصرية على قياس طيفي الامتصاصية والنفاذية للاغشية المحضرة لمدى الاطوال الموجية)nm 900(390 - ، وجد ان الامتصاصية تزداد بينما تقل النفاذية بزيادة سمك الغشاء لغاية سمك (Ǻ6000) ولا يوجد تاثير ملحوظ للسمك ((7000Ǻ. ووجد ايضا عند حساب الانعكاسية انها تزداد بزيادة السمك لغاية سمك (Ǻ6000) ولا يوجد تاثير ملحوظ للسمك ((7000Ǻ. حسبت قيم فجوة الطاقة الممنوعة للانتقال المباشر المسموح وكانت تتراوح من eV (2.8 - 3.05) ، اذ انها تقل بزيادة سمك الغشاء . اما قيم فجوة الطاقة الممنوعة للانتقال المباشر الممنوع فكانت تتراوح من eV (2.68 - 2.83) . وايضا درس تاثير السمك على معامل الانكسار ، معامل الخمود ، معامل الامتصاص ، ثابت العزل الكهربائي بجزئيه الحقيقي والخيالي ، والتوصيلية الضوئية ، وجد ان تغير السمك يؤثر على قيم هذه المعلمات. | In this research , the study of structural properties and the effect of thickness on the optical properties of (ZnO) thin films prepared by chemical spray pyrolysis . The thickness of the prepared thin films (2000,3000,4000,5000,6000,7000) Ǻ , which were deposited on glass substrate at a temperature of (400 ) . The optical properties including the measuring of absorbance and transmission spectra in the wavelength range (390 - 900) nm . It was found that absorbance increases while transmission decrease as the thickness increased up to (6000 Ǻ) , there is no any noticeable effect for thickness (7000 Ǻ) . And it was found that reflectance increases as the thickness increased up to (6000 Ǻ) , there is no any noticeable effect for thickness (7000 Ǻ) . The forbidden energy gap for direct allowed transition were calculated and it was in the range (2.8 - 3.05) eV , it decrease as the film thickness increase , and their values of the direct forbidden transition were in the range (2.68 - 2.83) eV . The effect of thickness on the refractive index , extinction coefficient , real and imaginary part of dielectric constant and optical conductivity were also studied , it was found that thickness variation affect on the values of these parameters .

تقنيات معالجة الصور لتصنيف قزحية العين == Image Processing Techniques For Iris Eye Classification

Author name: كاظم عجيل عبيد زغير النصار
Supervisor name: زياد محمد عبود | راضي شدهان حمودي
General topic: Physics
Specific topic: Image Processing
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: يوفر نظام التحقق الالي من التعرف على هوية الفرد على اساس الميزة الفريدة او السمة التي يمتلكها الفرد. ويعتبر التعرف على قزحية العين (للتعرف على بيانات الهوية) من اكثر الموثوقية والدقة. هدفت الدراسة الحالية، للتعرف على هوية الاشخاص من خلال دراسة تراكيب قزحية العين (اربعة مجاميع)، ودراسة خصائص هذه التراكيب من خلال التقاط صور للقزحية باستخدام كاميرراقمية، وتطبيق تقنيات المعالجة الصورية عليها، من ضمنها المعالجة الاولية. تم الحصول على 15 صورة لقزحيات مختلفة باللون لكل مجموعة (اي ما مجموعه 60 صورة). اولا يتم تحديد (استخلاص) منطقة الدراسة المهمة (ROI) من العين، ثم استخراج الخصاص الاحصائية (mean, Std., energy, homogeneity and entropy)، وتمييز المجاميع الاربعة(flower, Jewel, Shaker, Stream) لتراكيب القزحية بالاعتماد على الشبكة العصبية - العكسي. ثم تطبيق طريقة تحويل المويجي على نفس الصور واستخراج الخصاص الاحصائية، وتمييزها ايضا بالاعتماد على الشبكات العصبية - العكسي. ومقارنة النتائج لكل مجموعة قبل وبعد تطبيق طريقة تحويل المويجي. ودراسة امكانية تطبيق تقنية المنطق المضبب في تمييز تراكيب القزحية لعين الانسان بالاعتماد على الاحصائيات السابقة. اظهرت نتائج تمييز تراكيب القزحية الاربعة، بالاعتماد على الشبكة العصبية - العكسي بان نسب الدقة في التمييز تتراوح بين 72 - 75% وبعد تطبيق طريقة تحويل المويجي تبين انها تتفوق على التمييز باستخدام الشبكة العصبية - العكسي فقط بنسبة 5% على النسبة السابقة. وان تتميز تراكيب القزحية بتطبيق تقنية المنطق المضبب ينجح وبدقة عالية تصل الى 100% اذا كان بين اي نوعين من تراكيب القزحية الاربعة | Automatic verification of the identification of an individual based on the unique feature or characteristic that provides a system owned by the individual. The iris recognition (of identification data) from more reliability and accuracy. The present study aimed to identify the identity of the people through the study of the structures of the iris (four groups), and the study of the properties of these structures by capturing images of the iris using a digital camera, and the application of image processing techniques on them, including primary treatment. It was obtained on 15 different image Irises colors for each group (a total 60 images). First, extract important study area (ROI) of the eye image, then find the statistical operations (mean, Std., Energy, homogeneity and entropy), the distinction of the four groups (flower, Jewel, Shaker, Stream) for the structures of the iris based on backpropagation neural network. Then apply the method of wavelet transform on the same images and statistical operations, and to distinguish them also relying on the backpropagation neural networks. Finally; compare the results for each group before and after the application of wavelet transform method. And study the possibility of Fuzzy logic method discrimination in the application of the structures of the iris of the human eye, depending on the previous statistical operations. depending on the Backpropagation neural network that accuracy rates in distinguishing between 72 - 75% and after the application of wavelet transform the way turned out to be superior to the discrimination network using only 5% on rate the previous with Backpropagation neural network only, and characterized the structures of the iris by application Fuzzy logic method succeed and high accuracy of up to 100% if between any two of the four structures of the iris.

محاكاة الانتقال الحراري للمتراكبات النانوية لخلطة بوليمرية مدعمة بالانابيب الكاربونية النانوية == HEAT TRANSFERE SIMULATION OF CARBON NANOTUBE - POLYMER BLEND NANOCOMPOSITES

Author name: فاضل كريم فرحان
Supervisor name: صلاح قدوري هزاع
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: In this thesis, thermal conductivity, bending strength, erosion rate, and Vickers hardness, for (epoxy - un saturated polyester) blend reinforced with multi - wall carbon nano tubes ,have been studied, in terms of thermal and mechanical properties, which are subject to change in different (MWCNTs) volume fraction which are (0.1,0.2,0.3, 0.4)%.The nano composites candidates for this work are multi - wall carbon nano tubes), and blend matrix (epoxy - un saturated polyester). Ultrasonic dispersion and magnetic stirring techniques are used to prepare the nano composites specimens follow with cold - casting technique using Teflon molds at standard conditions.Lee’s disk technique is used to measure thermal conductivity. Oxy - acetylene flame technique is used to determine erosion rate. Instron machine is used to measure bending strength. Micro hardness Vickers technique is used to determine the hardness. Simulation programs of heat transfer in three dimensions for erosion test for blend and blend - nano composites specimens are carried out using finite difference method.Thermal conductivity results show that , values increase progressively by succession of volume fraction of fillers, become where is 0.7W/m.K for matrix blend ,and 3.8W/m.K for volume fraction 0.4% . Erosion rate behaves inversely, where it drops at high volume fraction 0.4% of fillers it is 0.19mm/s . Bending strength results show, that increases progressively of volume fraction (0.1,0.2,0.3)% of MWCNTs , become where it is (93,109,118) MPa , by succession ,and it drops at high volume fraction 0.4% of fillers it is 98MPa, the Y - modulus results show that , values increase progressively by succession of volume fraction of fillers, 1.4GPa for matrix blend, and 3.0GPa for 0.4%vol . Hardness Vickers results show that values increase progressively by succession of volume fraction of fillers ,14MPa for matrix blend, and 21MPa for 0.4%vol . Simulation thermal conductivity results, which are calculated according to Nielsen model, are compared, with the experimental results. From the results it can be observed, that the experimental values, are nearly the same as simulation values in heat flow flux direction. Erosion simulation values 0.2mm/s come higher than experimental values 0.19mm/s, this could be explained, by the interface effect of nanocomposites, which have high strength, strong bond force, and density values are evidence to that.Atomic force microscopy, coupled with auxiliary microscopy, and nanoparticle size measurements for powder MWCNTs are employed to aid interpretation of results. The nanocomposites under the study can be used in applications, which need high thermal dispersion and high erosion resistance, as thermal insulators.

الاستقصاءات العملية والمحاكاتية للميزات الترايبولوجية والحرارية للمتراكبات النانوية البوليمرية == Empirical and Simulation Investigations of Tribological andThermal Characteristics of Polymer Nanocomposites

Author name: فاضل كريم فرحان
Supervisor name: زينب عبد السلام الرمضان | بهجت بهلول كاظم
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: تم دراسة الخصائص الترايبولوجية , الخواص الميكانيكية , محلل التوصيل الحراري, تقنية التحليل الميكانيكي الحراري, تقنية تحليل الوزن الحرارية, معدل التقشر الحراري, معامل العزل الحراري, واختبار المحاكاتي لخلطة (الايبوكسي - البولي استر الغير مشبع) والمدعمة بكاربيد السيلكون النانوي بكسر حجمي (0%, 5%, 10% و15%) مع ثبات الكسر الحجمي للكرافيت الناعم 5% وهذه الدراسة خضعت بتغير في مختلف الكسر الحجمي بدلالة الخصائص الترايبولوجية, الخصائص الحرارية, الخصائص الميكانيكية. تم استخدام تقنية الموجات الفوق الصوتية للتفريق وتقنية الخلط المغناطيسي في تحضيرا لنماذج المتراكبات النانوية ثم تبعها تقنية الصب على البارد باستخدام قالب من التفلون حسب المواصفات القياسية. تم استخدام تقنية المسمار على القرص في قياس الخصائص الترايبولوجية,استخدمت الماكنة القياسية العالمية في قياس الخواص الميكانيكية, وتم استخدام تقنية الصلادة الدقائقية في تحديد قيم الصلادة,استخدمت تقنية المحلل الحراري(Mathis TC i) في قياس الخواص الحرارية, تم استخدام تقنية التحليل الميكانيكي الحراري TMA)) في قياس (معامل التمدد الحراري, الاجهاد الحراري, الانتقال الزجاجي ومعامل المرونة) عند مختلف درجات الحرارة. تم استخدام تقنية تحليل الوزن الحرارية TG)) لقياس تغير الكتلة مع الحرارة بثبوت الزمن. تم استخدام الشعلة الاوكسي استيلينية في تحديد معدل التقشر ومعامل العزل الحراري . تم تنفيذ برامج المحاكاة للانتقال الحراري بثلاث ابعاد باستخدام طريقة الفروقات المحددة لقياس معدل التقشر لنماذج المتراكبات النانوية والخلطة البوليمرية. اظهرت نتائج قيم الميزات الترايبولوجية ( معدل البلى الانزلاقي الجاف) بان معامل الاحتكاك يهبط تدريجيا بتعاقب النسبة المئوية الحجمية للنانوكاربيد السيلكون ويستقر عند قيم ثابتة لزمن الانزلاق العالي , يسلك معامل البلى كذلك نفس السلوك حيث يكون اوطا عند اعلى نسبة مئوية حجميه للنانو كاربيد السيلكون , وتعرض العلاقة بين الاحتكاك - البلى ميكانيكيتين متزاملة, الاولى مع بداية الحركة والمميزة بسطح باهت غير براق التي تدل, على الية التاكل بالحرث , والثانية التي ترافق الاحتكاك المستقر والمميز بالمظهر البراق التي تدل على الية التاكل باللصق. اظهرت نتائج القيم الصلادة زيادة تصاعدية بتعاقب الزيادة في الكسر الحجمي للمالئات. كذلك بينت نتائج قيم متانة الشد, الضغط والانحناء انخفاض تدريجي بتعاقب الزيادة في الكسر الحجمي للمالئات. بينما اظهرت نتائج قيم معامل المرونة زيادة تدريجية بتعاقب الزيادة في الكسر الحجمي للمالئات. كما اظهرت نتائج قيم المحلل التوصيل الحراري (التوصيلية الحرارية, التدفق الحراري, الانتشار الحراري) زيادة تدريجية بتعاقب الزيادة في الكسر الحجمي للمالئات. بينت نتائج السعة الحراري والمقاومة الحراري انخفاض تدريجي بتعاقب الزيادة في الكسر الحجمي للمالئات. اظهرت نتائج قيم التحليل الميكانيكي الحراري تحسن في معامل التمدد الحراري ومعامل المرونة بتعاقب الزيادة في الكسر الحجمي للمالئات. اظهرت نتائج قيم التحليل الوزن الحراري الخسارة العالية بالنسبة المئوية لكتلة خلطة الاساس, بينما اظهرت نتائج قيم الخسارة بالنسبة المئوية في الكتلة للمتراكبات النانوية انخفاض تدريجي بتعاقب الزيادة في الكسر الحجمي للمالئات. تاتي قيم التقشر بواسطة المحاكاة اعلى من قيم العملي هذا يمكن ان يوضح التداخل البيني للمتراكبات النانوية التي تمتلك متانة عالية وقوة ارتباط وان قيم الكثافة خير دليل على ذلك. تم حساب نتائج محاكاة التوصيلية الحرارية ومعامل الاحتكاك بموجب نموذج التركيب الدقائقي ونموذج نيلسون والتي تمت مقارنتها مع نتائج العملي والتي لوحظت انها تقع بين قيم محاكاة الاتجاه الموازي وقيم محاكاة الاتجاه العمودي للمادة المالئة والتي اثبتت ان المالئات تصطف قريبة من الاتجاه العمودي اكثر مما هو عليه من الاتجاه الافقي او العشوائي بالنسبة لاتجاه حركة الانزلاق او اتجاه التدفق الحراري. تم توظيف اقتران استخدام المجهر الالكتروني الماسح ((SEM وقيم الكثافات للمساعدة في تفسير النتائج. المتراكبات النانوية المستخدمة في هذا العمل تمتلك حشوات عالية يمكن استخدامها في التطبيقات عالية الترايبولجي , عالية التشتت الحراري ولمقاومة التقشر. | In this thesis, tribological characteristics, mechanical properties, thermal conductivity analyzer, thermal mechanical analysis technique, thermogravimetry technique, thermal ablation rate, thermal insulation indexed, and simulation test, have been studied for (epoxy - unsaturated polyester blend) reinforced with nano silicon carbide( 0vol %, 5vol%, 10vol%, 15vol%) with constant volume fraction of ultra fine graphite 5%, which are subject to change in different volume fraction in terms of tribological characteristics, thermal and mechanical properties. Ultrasonic dispersion and magnetic stirring techniques are used to prepare the nanocomposites specimens follow with cold - casting technique using flash Teflon molds standard conditions. [Pin - on - disc] technique is used to measure tribological characteristics, Universal testing machine technique is used to measure mechanical properties. Micro hardness Vickers technique is used to determine the hardness. Mathis TC i technique is used to measure thermal conductivity analyze, thermal mechanical analysis (TMA) technique is used to measure coefficient thermal expansion, thermal stress, glass translation and elastic modulus at different temperature. Thermogravimetry (TG) technique is used to measure mass change with time or temperature. Oxy - acetylene flame technique is used to determine ablation rate and insulation indexed. Simulation programs of heat transfer in three dimensions for ablation test for blend polymer and nanocomposites specimens are carried out using finite difference method. Tribological characteristics (dry sliding wear rate) results show that the coefficient of friction drops progressively and settles constant values by succession of Vol% Nano - SiC for high sliding time. Wear coefficient also behaves similarly as being lowest for high Vol% Nano - SiC . The wear - friction relationship displays two mechanisms, the first, associated with the run - in period recognized by dull matte finish which deal to abrasive wear mechanism, and the second mechanism is associated with steady friction recognized by high gloss appearance which is deal to adhesive wear mechanism. Hardness Vickers results show that values increase progressively by succession of volume fraction of fillers. Tensile strength, compression strength, bending strength results show that the values decreases with the increasing volume fraction of additives. while elastic modulus values increase progressively by succession of volume fraction of fillers. Thermal conductivity analyzer (thermal conductivity, thermal effusively, thermal diffusion) results show that values increase by succession of volume fraction of fillers . Heat capacity and thermal resistance results show that values decreases progressively by succession of volume fraction of fillers. Thermal mechanical analysis results show that values coefficient thermal expansion and elastic modulus improvement progressively by succession of volume fraction of fillers. Thermogravimetry results show that values change percentage of mass loss for blend resin matrix very high, while values change percentage of mass loss for nanocomposites decreases progressively by succession of increase volume fraction of fillers. Ablation simulation values come higher than experimental values, this could be explained, by the interface effect of nanocomposites, which have high strength, strong bond force, and density values are evidence to that. Simulation of coefficient of friction and thermal conductivity results, which are calculated according to micro structures model and Nielsen model, and when it was compared with the experimental results, it has been observed, that the experimental results, were localized between the parallel direction simulation values. and perpendicular direction values for additives, which is evidenced that the additives arrangement closed to perpendicular direction more than random or parallel direction with respect to dry sliding and heat flux direction. Scanning electron microscopy SEM, coupled with auxiliary microscopy, and densities were employed to aid interpretation of results. Nanocomposites used in this work, have high volume fraction of additives can be used in applications, which need high tribological, high thermal dispersion, and ablation resistance.

محاكاة لخصائص الهوائيات الكسورية المكونة من الميتاماتيريل == Simulation of Fractal Antenna Properties Composed of Metamaterials

Author name: عمار نضال شريف
Supervisor name: عامر باسم شعلان
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: الميتامتيريال او المواد ذات معامل الانكسار السالب هي مواد صناعية . تمتلك هذه المواد خصائص مثل معامل الانكسار السالب وهي خصائص غير موجودة في المواد الطبيعية. الميتامتيريال التي تم تصميمها من خلال وضع المرنانات الكهرومغناطيسية مثل المرنانات الحلقية المنفصلة (SSR) في مجموعة دورية من بين التصاميم الاكثر انتشارا. المرنانات الحلقية عند وضعها بالقرب من الهوائيات كغطاء فانها سوف تحسن معامل الكسب للهوائي. وعند حفر هذه المرنانات على سطح الهوائي فانها تؤدي الى تقليل حجم الهوائي. اصبحت الهوائيات المطبوعة من اكثر الهوائيات شيوعا وذلك لامتلاكها العديد من الخصائص مثل صغر حجمها وقلة وزنها وسهولة تصنيعها بكلفة قليلة. ان تصميم الهوائيات المطبوعة باستخدام اشكال الهندسة الكسورية اكسبها تحسين في خصائص الهوائي. في هذه الاطروحة تم تصميم ستة اشكال كلاسيكية واربعة اشكال كسورية لخلايا الميتامتيريال وتم حساب المعاملات الخاصة بها باستخدام طريقة الاسترجاع بواسطة برنامج (HFSS) المخصص لمحاكاة النماذج الكهرومغناطيسية. السماحية والنفاذية ومعامل الانكسار السالب تم حسابها وقد اظهرت هذه الخلايا تصرفا مشابها لتصرف المواد اليسارية عند ترددات الرنين العائدة لها. دراسة تاثير خلايا الميتامتيريال على خصائص الهوائيات يقع على شقين ، تحسين معامل الكسب وتقليل حجم الهوائي. غطاء الميتامتيريال الذي يتكون من خلايا كلاسيكية الشكل او خلايا كسورية الشكل تم وضعه فوق نماذج الهوائيات، كوخ الرباعي وبيانو ونتفة الثلج. تم الحصول على نتائج جيدة من تحسين معامل الكسب وتقليل الفصوص الجانبية في شكل المجال للهوائي. ان مقدار التحسين في بعض النماذج والتي تمتلك غطاء مكون من خلايا كسورية الشكل يصل الى 5 ديسيبل. ان المرنان الحلقي تم حفره على سطح الهوائي بيانو اما المرنان الحلقي على شكل هلبرت الكسوري فقد تم حفره على المستوي الارضي لهوائي نتفة الثلج. نتائج جيدة من تقليل الحجم تم الحصول عليها حيث ان مقدار التقليل بالحجم لهوائي بيانو وصل الى 41%. ان الهوائي كوخ الرباعي وهوائي بيانو تم دراستهم عمليا حيث تم تصنيعهم واجراء القياسات لهم باستخدام جهاز محلل شبكة النواقل. وتم الحصول على نتائج عملية متوافقة مع النتائج النظرية. في الدراسات المستقبلية سيتم دراسة اغطية الميتامتيريال لاكثر من طبقتين وبزوايا مختلفة نسبة الى مستوي الهوائي | Metamaterials or left - handed materials are man - made structures. They have properties like negative refractive index that is not found in natural materials. Metamaterials that is designed by placing electromagnetic resonators like split ring resonators (SRRs) in a periodic array is among the most popular designs. Split ring resonators when placed next to antennas as a cover, it will improve the gain of the antenna. Split ring resonator when slotted on patches, it causes a size reduction. Microstrip patch antennas have become one of the most popular antennas because they have many advantages such as low - profile, light weight, and low cost of fabrication. Designing of microstrip patches are utilized from fractal geometry. Fractal shapes exhibit antennas more improved in its parameters.In this thesis, six classical and four fractal unit cell metamaterials are designed and their parameters are calculated using retrieval method by HFSSV13 code for electromagnetic structure simulation. Permittivity, permeability, and negative refractive index are calculated. These shapes show left - handed behavior in their resonance frequencies.The study of effect of metamaterial unit cells on antenna parameters lies in two categories, gain enhancement and size reduction. Meta - cover of classical and fractal unit cells is placed above Quadruple Koch, Peano, and Snowflake antennas. Good results of gain enhancement and side lobe reduction are obtained. Enhancement of some models of fractal meta - cover equals 5 dB. Split ring resonator and Hilbert ring are slotted on antenna patch and ground plane of the antenna respectively. Two models are proposed, First iteration of Peano and Snowflake antennas. A good result of size reduction is obtained. The reduction in Peano antenna equals to 41%. Quadruple Koch and Peano antennas are studied experimentally. These models are fabricated and measured using vector network analyzer. Good agreement of measured and calculated results is obtained. In the future work more than two layers will be investigated with different angles relative to the antenna plane

تصميم عدسات كهروسكونيه باستخدام دوال محددة للقطع الزائد == Design Of Electrostatic Lenses Using Limited Hyperbolic Functions

Author name: عمار حسين محمد مهدي الخفاجي
Supervisor name: احمد كمال احمد | عبد الجبار محمد الفياض
General topic: Physics
Specific topic: Physics
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: يتضمن البحث دراسة نظريه في مجال بصريات الجسيمات المشحونه من خلال الاستعانه بطرائق التحليل العددي وباستخدام الحاسوب الشخصي.يرتكز البحث حول ايجاد التصميم الامثل لعدسات كهروسكونيه لتبئير حزم الجسيمات المشحونة ولمرايا كهروسكونيه وظيفتها معالجه الزيوغ في منظومات تتكون من عدسه ومراة باستخدام الطريقة العكسية.لقد تم في هذا البحث تصميم عدسات كهروسكونيه احادية الجهد تعمل بنمطي التكبير الصفري وغير المحدد وعدسه مغمورة تعمل بنمطي التكبير الصفري وغير المحدد ايضا، وكذلك الحال بالنسبة للمراة الكهروسكونيه احادية الجهد. وقد مثل الجهد الكهروسكوني المحوري باستخدام دوال محددة للقطع الزائد، ومن معرفه المشتقه الاولى والثانية للجهد المحوري يتم حل معادله الشعاع المحوري للحصول على مسار الجسيمات المشحونة الذي يحقق داله الجهد المفروضة لحساب الخواص البصرية مثل البعد البؤري ومعاملات الزيغ الكروي واللوني ومن ثم الحصول على شكل الاقطاب للعدسة الكهروسكونيه ومنها حل معادله لابلاس، ولقد كانت نتائج الزيوغ والخواص البصرية والاقطاب المصممة للعدسات الكهروسكونيه مقبولة | A computational invisestigion were carried out in the field of charged - particle optics with the aid of numerical analysis method and using the personal computer.It concerned with the design of electrostatic lenses for focusing charged particle beam and the design of electrostatic mirror for treatment of the aberration in optical system.During this project a unipotential lens - electrostatic lens operated under zero - magnification condition once, infinite - magnification condition.And immersion lens was operated under zero - magnification condition and infinite magnification condition.The axial electrostatic potential distribution was determined by using a hyperbolic function from which the paraxial - ray equation is solved to obtain the trajectory of particle that satisfy the suggested potential function.By known of the first and second derivatives of axial potential distribution, the optical properties such as the focal length and the spherical and chromatic aberration coefficients are determined.The electrode shape of the electrostatic lens was then determined from the solution of laplace's equation.

تاثر اشعة كاما المرتدة بكثافة المواد غير المتجانسة باستخدام طريقة مونت كارلو == The Effect of the Density of an Inhomogeneous Material on Gamma Backscattering Using Monte Carlo Method

Author name: عل نعمة محمد
Supervisor name: علاء باقر كاظم
General topic: Physics
Specific topic: Atomic Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: في البحث الحالي، تم تصميم وكتابة برنامج محاكاة حاسوبي بالاستناد على تقنية الفوتونات المرتدة وطريقة مونت كارلو ليكون منظومة عملية افتراضية، عوضا عن المنظومة العملية الحقيقية، في مجال الاختبارات اللااتلافية لتراكيب المواد المتاكلة (المتصداة). ولهذه المحاكاة القابلية على تحليل توزيع الطاقات للفوتونات التي تصل للمنظومة الكشفية بعد ان تعاني عدة استطارات في مادة الهدف. ۇجد انﱠ عدد الفوتونات المستطارة، سواء استطارة منفردة او متعددة، تعتمد على الترتيب الهندسي للمنظومة وعلى خصائص مادة الهدف. ان المعلومات التي تم الحصول عليها من هذه التقنية تعتمد بشكل وثيق على كثافة مادة الهدف، مما يسمح برصد اي تغيير في انتظام تركيب تلك المادة. على هذه الاسس، يصف برنامج المحاكاة الحاسوبي الحالي سلوك حالة التاكل لنماذج من الحديد او الفولاذ وصفا كميا. وقد تم تنفيذ هذا البرنامج على مجموعة من مركبات الصدا الشائعة، هي FeO, Fe2O3, Fe3O4, Fe(OH)2, Fe(OH)3, FeCl2 قورنت النتائج المستحصلة من هذا العمل مع بعض النتائج النظرية والعملية المنشورة، حيث اظهرت توافقا جيدا ضمن المعطيات التي تم تحديدها مسبقا. فكانت نسبة الخطا الخاصة بحسابات سمك التشبع بحدود (0.02 - 0.08)، بينما مقدار الخطا الخاص بحسابات الكثافة حوالي (0.003 - 0.04). ان نتائج المحاكاة الحالية مفيدة، ليس فقط، في تخمين الترتيب الافضل لمنظومة الفحص المعتمدة في عملها على مبدا استطارة كومبتن المرتدة للاشعاع وانما في تخمين امكانية التطبيق العملي لهذه المنظومة. زيادة على ذلك، انها وسيلة ناجعة في الفعاليات التدريبية للتنمية البشرية، للموظفين والطلبة، في مجال تطبيقات التقنيات النووية خصوصا في مجالي الصناعات الانشائية وصناعة النفط والغاز. من جانب اخر، باجراء بعض التحويرات الطفيفة على المحاكاة الحالية يمكن توظيفها في مجالات الفيزياء الاحيائية والطبية | A computer simulation program based on Monte Carlo method and photon backscattering technique was designed and written to be as virtual experimental system, instead of the real experimental system, concerning nondestructive testing (NDT) of corroded materials. The simulation based on this program was able to analyze the energy distribution of photons that reach a detector system after suffering several successive Compton scattering events in a target. It has found that the number of single and multiple backscattered photons depend on the geometry of the system and the characteristics of the target. Also the information has been obtained by this technique is strongly related to the material density, this allows changes in the material uniformity to be monitored. On these bases, the present computer simulation program is described to quantitatively characterize the corrosion status of steel samples under insulation. The program is carried out on FeO, Fe2O3, Fe3O4, Fe(OH)2, Fe(OH)3 and FeCl2. The results of this work were compared with the theoretical and experimental data. The comparison showed that are in good agreement with the published data. The deviation of the simulated results of this work from the experimental values about for the saturation thickness (0.02 - 0.08) and the errors of the density results from experimental data (0.003 - 0.04). Our simulation results are useful not only to evaluate the optimal configuration of an inspection system that has used Compton backscattered radiation, but also to assess the feasibility for setting up experimentally this system. In addition, it has been very useful for training activities with a view of human resources development, staff and students, in the field of application of nuclear techniques, particularly, in structural industries and industry of petroleum and gas. In addition, with slight modification, the present simulation technique can be employed in the fields of bio and medical physics

دراسة تاثير التشعيع ل PMMA المشععة الكترونيا بواسطة SEM == Investigation of Charging Effect in Electron Irradiated PMMA by SEM

Author name: علي سعد مهدي
Supervisor name: حسن نوري عبد الوهاب العبيدي
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: تم انجاز اجراء تحليلي لقياس الشحنة التي يمكن ان تحقن في نموذج لمادة عازلة في المجهر الالكتروني الماسح. يعتمد هذا الاجراء بالاساس على تحديد شحنة الاستقطاب بواسطة ظاهرة المراة الالكترونية. من خلال ذلك تم تطوير عدة علاقات مرتبطة بهذا الموضوع لتكون قابلة للتطبيق فيما يخص بالطبع شحنات الاستقطاب للمواد الخطية والموحدة الخواص . استنادا الى ذلك تم تحديد الجهد الذي ينشا كنتيجة لتاثير كلا من الشحنات المحقونة الحرة والشحنات المستقطبة. ومع ذلك فهذا العمل تم انجازه وفقا لمنطلق من الناحية النظرية وقد تم اعتماد منحنى التاثير المراتي بمثابة مقياس تقييم لجودة الصورة المراتية. لذلك فان هذا الاجراء قد تم استخدامه لدراسة منحنيات التاثير المراتي التجريبية لمادة PMMA ولجهود تشعيع مختلفة ومن ثم معرفة اهم المعلمات التي تؤثر على هذه المنحنيات. من ناحية اخرى تم دراسة محاكاة مسار الحزمة الالكترونية في داخل غرفة المجهر الالكتروني الماسح فيما يتعلق بتفاعل هذه الحزمة مع المادة ضمن الغرفة. في الواقع وقد استند التعامل الرياضي على الميكانيك الكلاسيكي باستخدام مفاهيم استطارة روذرفورد. في الواقع فان هذه الدراسة قد تم انجازها اولا باستخدام مجال التربيع العكسي اما المرحلة الثانية فهي تتعلق بمجال التربيع والتكعيب العكسي. اهمية الصيغ التي تم الحصول عليها لهذه المسارات تاتي من ارتباطها بين بعض من اهم المعلمات التي تتحكم في ظاهرة التاثير المراتي. هذه المعلمات في الواقع هي الشحنات المحقونة، زاوية السقوط، جهد المسح، ومسافة التشغيل، وثابت العزل الكهربائي لمادة العينة. اوضحت النتائج بشكل جلي ان شحنة الاستقطاب تؤثر على قوة كولوم التي تعاني منها الكترونات المسح. علاوة على ذلك فان التغير في جهد العينة يعتمد بصورة رئيسية على ثابت العزل لمادة العينة. | An analytical procedure has been carried out to measure the charge that may trapped in an insulator sample of scanning electron microscope. It is mainly concerning with the determination of the deduced polarization charges by means of mirror effect phenomenon. Several relations related to such issue have been modified so as to be applicable for regarding charges due to polarization in linear and isotropic material. Consequently, the potential arises as a result for both trapped free and polarization charges is set up. However, this work has been carried out concerning the theoretical point of view, the mirror plot curve has been adopted as an evaluation scale for the quality of the mirror image. Therefore, this procedure had been used to investigate the experimental mirror plot curves for PMMA material with different accelerating potential and then study the most important parameters that affects in these curves. From other hand, a simulation for the electron beam trajectory inside SEM chamber have been investigated regarding the interaction of this beam with material that chamber involves. Actually, the mathematical manipulation has been based on classical mechanics using Rutherford’ scattering aspects. This investigation, in fact, have been accomplished by using an inverse - square field in the first step while the second step has been concerned with an inverse - square and cubic field. The importance of the obtained formulas for these paths comes from its correlation among some of the most important parameters that control the mirror effect phenomenon. These parameters, in fact, are the trapped charges, incident angle, scanning potential, working distance, and dielectric constant of sample material. Results have clearly shows that the polarization charge significantly influences the Coulomb’s force that incoming electrons suffer from. Furthermore, the variation in the sample potential is mainly depend on the dielectric constant of the specimen material.

حسابات كثافات الحالة لما قبل توازن التفاعل النووي باستخدام نموذج الجسيمة المثارة == The Level Density Calculations of Pre - Equilibrium Nuclear Reaction Using the Exciton Model

Author name: علي داود سلوم العجيلي
Supervisor name: شفيق شاكر المولى
General topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: تم عرض كثافة الحالات الجزئية للجسيمات والفجوات المطلوبة لحساب المقاطع العرضية لما قبل توازن التفاعل النووي. حيث حسبت كثافة الحالات الجزئية باستخدام نموذج الاكسايتون ذا التباعد المتساوي الفسح الذي يعتبر الفسح بين المستويات متساوية وكثافة الحالة لجسيم مفرد ثابتة. صيغة اركسون التي تمثل الصيغة الخام وجميع الصيغ المصححة لكثافة الحالات الجزئية الناتجة من اضافة تصحيحات حقيقية لصيغة اركسون قد درست. وهؤلاء التصحيحات هم : التصحيح الناتج من مبدا باولي ، تصحيح الازدواج ، تصحيح الفجوات الفعالة والخاملة ، تصحيح عامل الشحنة ، تصحيح البرم ، تصحيح الزخم الخطي ، تصحيح الايزوسبن. في هذا العمل تم اقتراح الصيغة الشاملة التي تتضمن التصحيحات اعلاه حيث قورنت مع الصيغ الاخرى لكثافة الحالات الجزئية وقد بينت المقارنة ان صيغة تصحيح البرم هي الاقرب للصيغة الشاملة. كذلك قورنت نتائج الصيغ المصححة مع صيغة اركسون باعتبارها الصيغة الخام ونوقشت الفروقات بين هذه الصيغ وبين اركسون.كما درست كثافة الحالات الجزئية لمركبتين لصيغة اركسون وصيغة التصحيح الناتج من مبدا باولي وتصحيح الازدواج حيث شوهدت فروقات واضحة عن حالة المركبة الواحدة. كذلك تم حساب كثافة الحالات الجزئية باتخاذ كثافة الحالة للجسيم المفرد غير ثابتة (تقريب نموذج التباعد غير المتساوي) حيث تم اشتقاقها باستخدام متغير كثافة الحالات من صيغة القريشي الاولى وصيغة القريشي الثانية وصيغة روهر وقد لوحظ ان النتائج تختلف كما لو كانت كثافة الحالة لجسيم مفرد ماخوذة من نموذج الفسح المتساوية. واخيرا قورنت نتائج كثافة الحالات الجزئية مع النتائج المكتوبة بالفورتران 77 الموصوفة بواسطة الباحث افرجينو. بينت المقارنة ان نتائجنا يمكن اعتمادها في حسابات كثافات الحالات النووية لما قبل توازن التفاعل النووي. | The partial level density (PLD) of the particles and holes,which are required to calculate the cross sections of pre - equilibrium nuclear reactions, are reviewed. PLD were calculated using the equi - distant spacing model (ESM) that considers the spacing between the levels is equal and the single particle level density is constant.Ericson's formula which represents the crude formula and all other corrected formulae of PLD resulted from adding somereal corrections to Ericson's formula are studied. These corrections are; the correction due to Pauli's principle, pairing effect, active and passive holes effect, charge factor effect, surface effect, spin effect, linear momentum, and isospin effect.In this work, the comprehensive formula, which includes the above corrections, is suggested and compared with other PLD formulae. The comparison shows that the Ericson's formula with spin correction is closed to the comprehensive formula. The results of each PLD corrected formula are compared with the results of Ericson's formula and the effects of any correction toEricson's formula are discussed. Also, Two - component formula has been studied for Ericson, Williams and pairing, the results show that there is a remarkable difference between them. In addition, the PLD has been studied with various nuclei having different mass number (56Fe, 96Mo, 148Sm and 162Dy) and the results illustrate that the PLD increase with increasing the mass number. PLD is calculated by taking the single particle density as not constant (i.e. non - ESM approach) and by taking other expression to single particle level density where derived using the level density parameter from Al - Quraishi first formula, Al - Quraishi second formula and Roher formula. It is noted that the results differ from the results if the single particle level density which are taken from ESM.Finally, the results of PLD are also compared with the results of PLD code that are written in Fortran77 and distributed by Avirgeanu. The results show that our code can be dependentand can be used in nuclear level density calculations for preequilibrium reactions

دراسة اطياف الامتصاص لبعض الجزيئات اللاعضوية في مناطق اطياف الاشعة فوق البنفسجية والمرئية وتحت الحمراء == Study The Absorption Spectra of Some Inorganic Molecules In UV - VIS - IR Rang of Spectrum

Author name: مريم سمير عبد الستار هاشم
Supervisor name: خالد حسن عبد المعموري
General topic: Physics
Specific topic: Physics
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: The study is dealt with inorganic compound molecules of polyatomic ions belong to different point groups. Through our study we made used the FT - IR to study of the vibrational spectra, and UV - VIS Spectroscopy to study and diagnosis the electronic spec

دراسة الخواص البصرية والتركيبية لاغشية Fe?O? : Al المحضرة بطريقة التحلل الكيميائي الحراري == Study of Optical And Structural Propertes of Fe?O? : Al Thin Films Prepared By Chemical Spray Pyrolysis Method

Author name: لمى لفتة راهي
Supervisor name: خضير عباس مشجل
General topic: Physics
Specific topic: Physics
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: حضرت اغشية اوكسيد الحديديك ( Fe?O? ) غيرالمشوبة والمشوبة بالالمنيوم (Al) باستخدام طريقة التحلل الكيميائي الحراري على قواعد من الزجاج وبتركيز (0.1) مولاري وبدرجة حرارة القاعدة (400?C) وبنسب حجمية مختلفة %(2,4,6,8).تمت دراسة الخواص التركيبية والبصرية، اذ | In this research Iron Oxide and AL doped Iron Oxide thin films were prepared using Chemical spray pyrolysis technique at (0.1 mol) on glass substrate at a temperature of (400?C) with volumetric concentration (2,4,6,8)%.The optical and structural properti

دراسة تاثير تشبع الاقطاب المغناطيسية اللاتقليدية على الخواص الشيئية == Influnce Investigation of The Unconventional Magnetic Polepieces on The Objective Properties

Author name: محمد جمعة حيدر الشمري
Supervisor name: حسن نوري العبيدي
General topic: Physics
Specific topic: Physics
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: في هذا البحث تم اجراء دراسة نظرية - حاسوبية تتضمن جزئين رئيسين. يتناول الاول منهما استخدام انموذج Gauss كدالة هدف في توليف العدسات المغناطيسية ثنائية القطب المتناظرة. افرزت هذه الدالة ثلاث متغيرات امثلية وهي القيمة العظمى لكثافة الفيض المغناطيسي، عرض ال | In this work, a theoretical - computational investingation have been carried out which compramize on two main parts. the first one deals with the using Gauss's model as a target function in synthesize symmetrical double polepieces magnetic lenses. This

تطوير مرشحات رقمية لتحسين الصور الطبية == Adaptive Digital Filters For Medical Images Enhancement

Author name: فلاح عابر بيده البيضاني
Supervisor name: زياد محمد عبود
General topic: Physics
Specific topic: Physics
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: تعد الضوضاء المرافقة للصور الطبية من جملة المشاكلات التي تواجه عملية تشخيص الامراض بواسطة هذه الصور، فضلا عن عدم جودة الصور بسبب الاضاءة والتباين المطلوبين، لانها تجعل عملية تفسير الصور الطبية الناتجة وتحليلها عملية صعبة، وتقلل من الفائدة المرجوة منها، ل | The noise accompanying the images medical among the problems faced by the process of diagnosing diseases by these images, as well as the lack of quality images because of the brightness and contrast wanted, they make the process of interpretation and anal

دراسة نظرية لتحديد افضل قدرة مستحصلة في منظومة القدرة التناضحية المفتوحة == Theoretical Study And Optimization of An Open Cycle Osmotic Power Process

Author name: مضر صباح حميد
Supervisor name: عادل عبيد شريف الحسيني | احمد فرحان عطوان
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: A great quantity of renewable energy can be potentially generated when waters of different salinities are mixed together. The harnessing of this energy for conversion into power can be accomplished by means of the Pressure Retarded Osmosis (PRO). This tec

الخصائص الميكانيكية الكهربائية والحرارية لمتراكبات البوليمر - انابيب الكاربون النانوية == Polymer - Carbon Nanotube Composites Mechanical, Electrical And Thermal Properties

Author name: فاطمة احمد خلف
Supervisor name: نجيبة عبد الله حسن الحمداني | طارق سهيل نجم
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: تعتبر البوليمرات ذات الاساس البوليمري من اهم المتراكبات بسبب قابليتها على الاندماج مع عدد من مختلف المواد. تم التركيز في هذه الدراسة على تطوير ودراسة خصائص متراكبات نانوية متكونة من الراتنج epoxy)) المتصلد حراريا كمادة اساس مضاف اليها الانابيب الكاربوني | Polymer matrix composites (PMCs) are one of the most important composites materials due to their ability to incorporate a number of different materials. This study focuses on development and characterization of thermosetting resin epoxy based nanocomposit
1 ... 7 8 9 10 11 ... 14