عرض: 25 50 75 100 النتائج

نتائج البحث: 25 من أصل 31,012

تقييم المقاطع العرضية لليورانيوم للتفاعلات المستحثة بالنيوترون Cross Sections Evaluation of Uranium for Neutron Induced Reactions

اسم المؤلف: روناك اكرام علي
اسم المشرف: ايمان طارق العلوي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: لقد تم في هذا البحث حساب قيم المقاطع العرضية لنظائر اليورانيوم (A=230 - 238) للتفاعلات المستحثة بالنيوترونات التالية ,,,(n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), (n,γ), (n,p), (n,t), (n,d), (n,α), (n,2α),and (n,2p)المقاسة بفترات مختلفة من الطاقة حيث ان هذه القراءات تم اخذها من الوكالة الدولية للطاقة الذرية (IAEA ) ومن المكتبات المشهورة عالميا مثل EXFOR, CINDA, ENDF, JEFF, JENDL,ROSFOND,CENDL,WIND, TENDL, BROND, IRDF, EAF وقد تم قياسها في الفترة الاولى من منتصف القرن الماضي وحتى اخر سنوات الماضية .لقد تم تحليل المديات الكاملة للطاقة لكل تفاعل وقد تم اعادة حساب وتقييم المقاطع العرضية ضمن فترات صغيرة مختلفة حسب مديات الطاقة للنيوترون القاصف مع الاخطاء المرافقة لها. قد تم وضع صيغ رياضية لمتعددة الحدود في معظم التفاعلات والتي تربط بين تغيير المقطع العرضي مع الطاقة والتي يمكن استخدامها للتنبىء بقيم المقاطع العرضية غير المحسوبة. لقد تم حساب قيمة Q - للتفاعل وطاقة الربط وطاقة العتبة وفرق الكتلة وعامل الرص لكل تفاعل ولكل عنصر هدف. ان التقييمات اعتمدت بشكل رئيسي على حسابات نموذج الجهد البصري لقد اعتمدت الحسابات على معاملات الجهد البصري النووي حيث تم اختيار وجمع المعلومات من مكتبة (RIPL) التابعة للوكالة الدولية للطاقة الذرية. لقد قمنا بدراسة صيغتين مختلفتين لنموذج الجهد البصري حيث ان الصيغة الاولى تسمى نموذج الجهد البصري القياسي والمعاملات ماخوذة من مكتبة Beijing والصيغة الثانية لنموذج الجهد البصري قد تم حسابها بتحديد ثلاث مديات طاقية. لقد قمنا بدراسة نسبة التفاعل (n,f) لكل نظير من نظائر اليورانيوم نسبة الى يورانيوم - 235 والذي يعتبر نموذج قياسي. لقد قمنا بحساب هذه النسبة لجميع التفاعلات المتوفرة لدينا وليس فقط تفاعل الانشطار واحتسبناها نسبة الى يورانيوم - 235.حساب اخر تم اضافته الى هذه الدراسة وهو دراسة تاثير التلوث لوليدة اليورانيوم - 237 والتي هي نبتونيوم - 237 بعمر نصفي 6.8 يوم وكذلك حساب الفيض النيوتروني لكل منهما. | The cross sections of Uranium isotopes (A=230 - 238) for the (n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), (n,γ), (n,p), (n,t), (n,d), (n,α), (n,2α),and (n,2p) reactions are calculated with different energy intervals which are collected from International Atomic Energy Agency (IAEA). The available cross sections data for the reactions mentioned above are collected from the well known international libraries like EXFOR, CINDA, ENDF, JEFF, JENDL, ROSFOND, CENDL, WIND, TENDL, BROND, IRDF, EAF and measured during the period from the middle of the last century up to several years ago.The cross sections are reproduced in fine steps of incident neutron energy in different intervals with the corresponding errors. The recommended cross sections for all available experimental data have been calculated for all considered reactions mathematical representative equations for all these reactions are formulated. These equations represent the variation of the cross section with energy, which could be used to predict the values of uncalculated cross sections.Q - value, threshold energy, binding energy, mass excess, and packing fraction for each reaction and target element have been also calculated.The evaluations are based mainly on the calculations of the optical model potential. The calculations are based on the nuclear optical potential, where the relevant parameters are collected and selected from Reference Input Parameter Library (RIPL) which is being developed under the international project coordinated by the International Atomic Energy Agency (IAEA). We study two different formula for optical model potential the first formula is the standard optical potential model and its parameters are taken from Beijing library. The second formula is the optical potential with different energy ranges. We study the ratio of the (n,f) cross sections for each Uranium isotopes relative to (n,f) cross section for U - 235 which could be considered as a standard sample. We have done the ratio not for the (n,f) cross sections only but also for other reactions like ,(n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), and (n,γ) relative to U - 235 reactions cross sections.Another evaluation is added to cross sections is the effect of the contamination of the daughter of U - 237 which the daughter is Np - 237 6.8day and their relative flux

دراسة تاثير المعاملة الحرارية على الخواص التركيبية والميكانيكية لبوليمر (بولي تيترافلورواثيلين) Study the Effect of Heat Treatment on the Structural and Mechanical Properties for poly (tetrafluoroethylene

اسم المؤلف: رند باسم لطفي الكرخي
اسم المشرف: مي عبد الستار محمد نجيب
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: درس في هذا العمل نوعين من بولي تيترافلورواثيلين ( النقيين ولكن باختلاف الشركة المصنعة PTFE) (صيني _اماراتي ) بطريقه صب المحلول كافلام رقيقه واشرطة , بواسطه الخواص التركيبيه (حيود الاشعه السينيه ومسعريه المسح التفاضلي ) والخصائص الميكانيكية بدلاله درجات حراره مختلفة للدوره الحرارية . يبين كلا النوعين تغير في الشده المستطاره من المستوى القاعدي (100) عند تغير درجه حرارة الدورة الحرارية واظهر النوعين زيادة في التبلورية مع زياة درجة الحرارة .كذلك اختلاف في الانثالبي عند اختلاف درجات الحرارة حيث لوحظ زياة الانثالبي بزيادة درجة الحرارة واختلاف في الخصائص الميكانيكيه ( الاجهاد والانفعال عند نقطة الخضوع ونقطه الكسر ومعامل يونك) للبوليمر حيث اظهرت المعالجة الحرارية للبوليمر بدرجات حرارة مختلفة من اجل معرفة خصائصه ومقاومته الى الظروف البيئية ان الخواص الميكانيكية تزداد زيادة خطيا مع زيادة درجة الحرارة .لوحظ بان انتاج الشركه المصنعة الصينية افضل من ناحية النتائج لايجاد درجة التبلورية والخصائص الميكانيكيه عن انتاج الشركة المصنعة الاماراتية لنفس المادة البوليمرية | In this study two modifications of pure polytetrafluoroethylene (PTFE) [C2F4]n. China_UAE source prepared from solution cast as film and strip have been studied by structural (X - ray diffraction (XRD), Differential Scanning Calorimetry (DSC)) and mechanical properties .subjected to different temperature heating cycle. Both modifications show variation in the scattered X - ray intensity of the basal plane (100) as the temperature of heating cycle is changed and show increasing in crystallinity with the increase of temperature .Moreover, the Enthalpy of each kind is changed with difference of heat treatment where the enthalpy increase with the increase of temperature, and two modifications show different in mechanical properties for PTFE (young's modulus, stress at break, stress at yield, elongation at yield. And elongation at break) when the temperature is change ,The heat treatment of polymer to different temperatures in order to know its properties and resistance to environmental conditions results showed that the mechanical properties increase linearly with the increase of temperature.It seems that the product company of china is better than the product company of UAE in degree of crystallinity and mechanical properties for this polymer.

الدراسه النظريه لتصميم ماكنه بؤره البلازما وتحقيق العوامل المختلفه التي تؤثر على حصيله النيترون المنبعث Theoretical study to design plasma focus machine and investigate various parameters that affect its emitted neutron yield

اسم المؤلف: رنا عيســـى بــك مــــراد
اسم المشرف: مصطفى كامل جاسم رعد حميد مجيد
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: فيزياء البلازما
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا البحث تم تصميم جهاز بؤرة البلازما الكثيفة نظريا بالاعتماد على موديل (لـــي) بناءا المعادلات الرياضية لنموذج لي لكل من هندسة القطبين وعناصر الدائرة الخارجية التي تضم متسعة ومحاثة ومقاومة (RLC). وبعد اجراء الحسابات اللازمة تم ادخال نتائج التصميم في برنامج لرؤية مدى امكانية تشغيله نظريا من خلال دراسة المعلمات المختلفة التي يوفرها البرنامج وبالتالي التعرف على ظروف تشغيله والعوامل المؤثرة عليه. لقد اختير غار الديترويوم كغاز عامل في هذه المنظومة للحصول على ناتج نيتروني من اجل التفاعل النووي الاندماجي. وتم اختبار ودراسة المنظومة عند ضغطين مختلفين (3و4 تور) حيث درست مختلف معلماتها التي يوفرها البرنامج ونوقشت وقورنت النتائج بالاشكال البيانية. اضافة لذلك تمت مقارنة المنظومة المصممة مع منظومة قياسية تناظرها من حيث التركيب النظري وهي منظومة NX2 التي بنيت اساسا للحصول على الاشعة السينية باستعمال غازات النبيلة. اختير في البحث ان يكون غاز الديتريوم هو الغاز العامل للحصول على ناتج نيتروني من اجل المقارنة، حيث درست جميع معلمات التشغيل للمنظومة المصممة مع القياسية بالرسوم البيانية.لقد وجد من خلال انجاز الحسابات اللازمة بان الشكل البياني لانحدار تيار الانبوب الكلي (dip) مباشرة بعد قمة التيار مع الزمن للمنظومة المصممة متفق تماما مع الشكل العام المميز لمنظومات بؤرة البلازما التجريبية دلالة على ان حسابات التصميم صالحة لهذه المنظومة وبالتالي يمكن اجراء الحسابات. ان تصرف فولتية الانبوب مع الزمن للمنظومة المصصمة كان بنفس الشاكله مع المنظومة القياسية. وينطبق هذا على سلوك المعلمات الاخرى بين المنظومتين مثل السرعة والمسار المحوريان والمسار الى الداخل للصدمة الشعاعية ومسار وسرعة استطالة القرص ومسار وسرعة الصدمة المنعكسة شعاعيا وغيرها.تم دراسة ومقارنة تغيرات درجة حرارة البلازما مع الزمن للمنظومتين عند نفس الضغط ولضغطان مختلفان للمنظومة المصممة وكان تصرف ماكنتا بؤرة البلازما بنفس الطريقة. وتم حساب الخسائر المتولدة من الماكنتان مثل خسائر جول وبرمنشتهالنك واعادة الاتحاد وخسائر الطاقة الشعاع الخطي مع الزمن. اخيرا وجد ان المنظومة المصممة ( 1.66 × neutron per shot ) توفر ناتج نيتروني اكبر من المنظومة القياسية (5.15 × neutron per shot) . لقد تصرفت المنظومة المصممة مثل المنظومة القياسية لكن كان الاختلاف في سلوك المنظومة المصممة والقياسية هو اختلاف الترتيب الهندسي للمنظومتين من حيث هندسة الاقطاب واختلاف قيم العناصر الكهربائية للدائرة الخارجية. ان المنظومة المصممة نظريا في هذا البحث يمكن ان تكون مشروع لبناء ماكنة بؤرة بلازما تطبيقية للحصول على ناتجها النيتروني العالي للاستفادة منه في اجراء تفاعل الاندماج النووي.

المقاطع العرضية لتفاعلات القنص والجسيمات المشحونة لانتاج نظائر اليود الطبي المشع Capture and Charged Particles Reactions Cross Sections for Production of Iodine Medical Radioisotopes

اسم المؤلف: رغد سعدون محمد
اسم المشرف: ايمان طارق العلوي
الموضوع العام: علوم الفيزياء
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تعددت الوسائل التي يحاول الاطباء من خلالها الكشف المبكر عن الامراض السرطانية ومن ثم السيطرة عليها قبل ان تتفاقم ويصعب علاجها. ان اخر ما توصل اليه الطب الحديث للحد من انتشار هذه الامراض هو استخدام نظائر المواد المشعة في علاج بعض الامراض وتشخيص البعض الاخر حيث يلعب النشاط الاشعاعي المنبعث من انحلال النظائر المشعة مثل انبعاث الكترونات اوجر والبوزترونات واشعة كاما دورا هاما في التطبيقات الطبية التشخيصية والعلاجية, ان الانوية المشعة ذات الاعمار النصفية الصغيرة (بضع ساعات) تكون ملائمة للحالات التشخيصة وهذا مايسمى التصوير بواسطة الانبعاث البوزتروني (PET) او بقياس طاقة فوتون كاما المنفرد (SPET) حيث تعطي هذه التقنيات صور ثلاثية الابعاد للعضو المراد فحصه, اما الحالات العلاجية فان الاشعة المؤينة المنطلقة لمسافات قصيرة تكون ملائمة لاختراق الانسجة وتغير تركيب الحمض النووي للانسجة المصابة. هذه النظائر يتم انتاجها بواسطة معجلات او مفاعلات نووية خاصة لهذه الاغراض ومن ثم يتم التاكد من نقائها من الشوائب النووية التي تظهر في عملية الانتاج قبل اعطائها للمريض . مما تقدم تم اختيار نظائر اليود المشع (I; A= 119→126, 128, 130, 131) في هذه الدراسة لان معظم نظائره ذات اعمار نصفية ملائمة للحالات العلاجية والتشخيصية. ان الطرق الرئيسية لانتاج اليود هو باستخدام الاهداف , , والتي تضمنت 38 تفاعل مباشر و9 تفاعلات غير مباشرة. وقد تم حساب المقاطع العرضية لتفاعلات (p,γ)و (p,α)و(p,xn) و(d,xn) و(α,xn) لانتاج نظائر اليود المشع حيث تم تقييمها في العمل الحالي اعتمادا على القيم العملية المتوفرة في مكتبة (EXFOR) التابعة لوكالة الطاقة الذرية الدولية (IAEA) حيث احتوت مكتبة (EXFOR) على البيانات العملية للمقاطع العرضية المقاسة لعدة سنوات سابقة ولعدة باحثين حتى الوقت الحالي. ان افضل التفاعلات لانتاج I - 123 هما و, وكذلك افضل التفاعلات لانتاج I - 124 هما و, ولانتاج I - 125 فان افضل تفاعل هو كون هذه التفاعلات تتمتع بانتاج عالي وشوائب قليلة ضمن مدى طاقي قليل. وان افضل تفاعل لانتاج I - 131 هو التفاعل غير المباشر لاهميته باستخدامه في (SPET) لغرض تصوير الغدة الدرقية وكذلك لعلاج سرطان الغدة الدرقية. لقد تم تحليل مديات الطاقة الكاملة لكل تفاعل وقد تم اعادة حساب المقاطع العرضية بفترات صغيرة لطاقة البروتون او الديتريون او جسيمة الفا الساقط بلغت (0.01MeV) مع الاخطاء المرافقة لها. وبذالك تم حساب المقاطع العرضية المختارة لانتاج نظائر اليود المشع وايجاد معادلات الملائمة من نوع Polynomials لعدة مراتب n= 4→10 والتي تربط بين تغير المقطع العرضي مع الطاقة والتي يمكن استخدامها للتنبؤ بقيم المقاطع العرضية غير المحسوبة. لقد تم حساب مستوى الشوائب التي تظهر في عمليات انتاج النظائر التي لها اعلى تطبيقات طبية واختيار افضل منطقة ذات مدى طاقة يتم تحديده باستخدام السايكترون للحد من ظهور الشوائب النووية وتم الحصول على توافق جيد بين النتائج النظرية والنتائج العملية المتوفرة. لقد تم حساب قدرة الايقاف على اساس صيغة زكلر من اجل حساب ناتج (yield) كل تفاعل وحساب سمك الهدف. وقد تم حساب قيمة Q وطاقة العتبة وطاقة الربط والمقاطع العرضية لنظائر اليود المختارة. تم بناء البرامج الحسابية Recom.m وStopp.m وStopd.m وStopa.m وYield.m وImpurity.m في العمل الحالي باستخدام Matlab - 8 اضافة لاستخدام برنامج SRIM (2003) لاجراء الحسابات. | There are many ways in which doctors attempt to early detection of cancer and then control it before it worsen and becomes difficult to treat. The latest findings of modern medicine to reduce the spread of these diseases is the use of isotopes of radioactive Iodine in the treatment of some diseases and diagnosis of others where it plays radioactivity emitted from the dissolution of radioactive isotopes, such as the emission of Auger electrons, positrons and gamma rays which play an important role in medical applications of diagnostic and therapeutic. The half - life of radioactive nuclei with a few hours are appropriate for situations diagnostic and this called imaging by Positron Emission Tomography (PET) or Single Photon Emission Tomography (SPET). These techniques give a three - dimensional picture of the organ to be scan, either cases the therapeutic ionizing radiation emitted over short distances are appropriate to penetrate the tissue and change the structure of DNA of the infected tissue. These principals are produced by accelerators or nuclear reactors, especially for this purpose and then be sure of the purity of nuclear impurities that appear in the production process before giving it to the patient. Isotopes of radioactive Iodine (I; A= 119→126, 128, 130, 131) have been selected in the present work. Since they have suitable half - life that could be used for treatment and diagnostic. The main production routes, use , , targets, including 38 direct reactions and 9 indirect reactions. Exciitation functions for proton, deuteron and alpha particles for the reactions (p,xn), (p,α), (p,γ), (d,xn), (α,xn) (n,p) for the production of isotopes of radioactive Iodine have been evaluated using an experimental of energy of incident particles and cross sections published in the International Atomic Energy Agency (IAEA), especially (EXFOR) library which measured cross sections for different authors and for several years prior to the present. The best reactions for the production of Iodine - 123 are the reaction and reactions, while the best reactions for the production of Iodine - 124 are and reactions. For the production of Iodine - 125, the best reaction is , because it possesses less impurities and low energy ranges and higher yields. While the best indirect reaction for the production of Iodine - 131 is for its importance using in (SPET) for imaging of the thyroid gland and as a therapy by thyroid cancer. The analysis of a complete energy range has been done for each interaction. The cross sections are reproduced in fine steps of incident proton or deuteron or alpha particle energy in 0.01MeV intervals with their corresponding error. Therefore, the selected cross section for the production of radioactive Iodine isotopes have been calculated with a polynomials fitting with a degree n=4→10 that could be used for the prediction of un calculated cross sections. Level of impurities that appear in the isotope production processes that which have the highest medical applications have been calculated. The best area of useful energy range has been chosen by using cyclotron to reduce the appearance of nuclear impurities The stopping power according to Zeigler formulae was used in order to obtain the yield for each reaction and to calculate the target thicknes. Q - value, threshold energy and binding energy for selected Iodine isotopes were also calculated. The programmes of Recom.m, Stopp.m, Stopd.m, Stopa.m, Yield.m and Impurity.m, have been built in the present work using Matlab - 8 to calculate the results of the present work, as well as SRIM (2003) program were used

دراسة الخواص البصرية والكهربائية لمتراكبات PMMA/ اكسيد المعادن Study the Optical and Electrical Properties of PMMA/Metal Oxide Composites

اسم المؤلف: رسل طه حسين
اسم المشرف: رغد صبحي الخفاجي
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يهدف هذا البحث الى تحضير متراكبات ثلاثية هجينة من PMMA مقواة بجسيمات TiO2 - Al2O3 وZrO2 بتقنية الصب .تم استخدام كسور وزنية (84 - 92) wt % من بولي ميثيل ميثا اكريلك ونسبة ثابتة % (4) من تيتانيا مع نسب وزنية تتراوح بين wt % (4 - 12) للالومينا والزركونيوم. تم دراسة المواصفات التركيبية من خلال حيود الاشعة السينية ومجهر القوة الذرية. بينت فحوصات صور مجهر القوة الذرية تجانس في البناء البلوري. اما الخواص العزلية فقد فحصت من خلال قياس ثابت العزل عند مدى تردد (102 - 106) Hz وبينت النتائج ظهور تاثير طفيف عند اضافة الالومينا للمتراكب الهجيني (PMMA - TiO2 - Al2O3) مقارنة بمضاف الزركونيوم للمتراكب الهجيني (PMMA - TiO2 - ZrO2) حيث قيم ثابت العزل تزداد مع زيادة التركيز (3.408500 - 10.69851). في حين يتناقص عامل الفقد بزيادة التردد للمتراكبات (PMMA - TiO2 - Al2O3)و(PMMA - TiO2 - ZrO2) . قيست التوصيلية الكهربائية المستمرة لمدى درجات حرارية تتراوح بين ( 313 - 373 )K ولوحظت زيادة في القيم التوصيلية بزيادة التركيز ودرجة الحرارة (5.5E - 10 - 8.52E - 10) (Ω.m) - 1 في حالة الزركونيوم المضاف للمتراكب الهجيني. تم حساب الثوابت البصرية للعينات المحضرة كدالة للطول الموجي وذلك باستخدام مطياف بمدى nm( - 1100200). حيث تم حساب معامل الامتصاص، معامل الخمود، معامل الانكسار وفجوة الطاقة البصرية, ومن حساب النتائج نلاحظ ان قيم معامل الامتصاص ومعامل الخمود ومعامل الانكسار لل(PMMA - TiO2 - Al2O3) اعلى من (PMMA - TiO2 - ZrO2) كدالة للطول الموجي، نلاحظ ايضا، انخفاض في قيم فجوة الطاقة البصرية المسموحة eV (2.90 - 2.50) في متراكبات الالومينا بينما من (2.90 - 2.58) eV للزركونيوم. وكذالك فجوة الطاقة البصرية الممنوعة (2.85 - 2.48) eV الكترون فولت للالومينا بينما eV (2.85 - 2.52) للزركونوم . | This study aims to synthesize ternary hybrid composites PMMA polymer matrix with TiO2, Al2O3 and ZrO2 as additives using casting technique. the weight fractions of matrix with range (84 - 92) wt %, fixed percentage (4) % of TiO2 and range of weight fractions with range (4 - 12) wt % of Al2O3 and ZrO2 were used as started materials. Characterization properties were examined through XRD and AFM. Obtained micrograph and XRD revealed homogeneity structure for Al2O3 filler. Dielectric properties such as dielectric constant were carried for range (102 - 106) Hz frequency .The addition of Alumina filler exibits slightly effect on dielectric constant values for prepared ternary hybrid composite (PMMA - TiO2 - Al2O3 ) compared with ZrO2 for ternary hybrid composite (PMMA - TiO2 - ZrO2) where dielectric constant increases as concentration increases (3.408500 - 10.69851) . Dissipation factor decreases with increasing frequency in composite (PMMA - TiO2 - Al2O3) and (PMMA - TiO2 - ZrO2). DC electrical conductivity was conducted in temperature range ( 313 - 373 )K. Markedly increasing for the DC electrical conductivity of Zirconia filler with respect to additional concentration (5.5E - 10 - 8.52E - 10) (Ω.m) - 1 .Otherwise DC electrical conductivity increases versus applied temperature for both prepared composites. Optical constants (extinction coefficient, absorption coefficient, and Index of refraction), optical energy gap were obtained for prepared Specimens as function of wavelength using spectrometer at range (200 - 1100)nm. It was noticed that the values of extinction coefficient ,coefficient of absorption , and refractive index for (PMMA - TiO2 - Al2O3) are higher from that of (PMMA - TiO2 - ZrO2) as wavelength, also, more decreasing in allowed optical energy gap values from (2.90 - 2.50 eV) for Al2O3 filler and from (2.90 - 2.58 eV) for ZrO2 as additive. Also forbidden optical energy gap decreases in case Al2O3 from(2.85 - 2.48) eV while from (2.85 - 2.52) for ZrO2 as additive.

دراسة التركيب المتهيج للنوى زوجية - زوجية ذات العدد الذري Z= 50, 48, 46 في المستوى المتهيج الاول Study of Excited Structure for Even - Even Nuclides of Z = 50, 48, 46 in The First Excited State

اسم المؤلف: رسل سعد هادي
اسم المشرف: فاطمة عبد الامير جاسم
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: درست الخواص الكهرومغناطيسية للنظائر زوجية - زوجية للنوى 48Cd , 50Sn و46Pd الغنية بالنيوترونات من خلال قوى الانتقال لرباعي القطب الكهربائي |M(E2)|2 W.u ↓ واحتمالية الانتقال المختزل B(E2)W.u ↓ لانتقال اشعة كاما من المستوى المتهيج الاول الى المستوى الارضي. حيث تم حساب قوى الانتقال لرباعي القطب الكهربائي |M(E2)|2 W.u ↓ بالاستعانة بمعدل العمر للمستوى المتهيج الاول والشدة النسبية لاشعة كاما المنبعثة من ذلك المستوى, بينما قيم احتمالية الانتقال المختزل B(E2)W.u ↓ استخرجت من خلال عمر النصف للمستوى المتهيج الاول المصحح لمعامل التحول الداخلي.وللحصول على قيمة دقيقة لانتقال رباعي القطب الكهربائي ↓ E2, تم حساب ورسم القيم المتبناة لكل من |M(E2)|2 W.u ↓ وB(E2)W.u ↓ كدالة لعدد النيوترونات.في هذا البحث, تم تحويل القيم المتبناة لانتقال ↓E2 الى قيم احتمالية الانتقال المختزل B(E2) ↑ e2b2 والتي افادتنا في دراسة تركيب النوى من حيث الاختلاف في الشكل لان عامل التشوه β تم استخراجه من B(E2) ↑ e2b2, كما ان دراسة تاثير عدد النيوترونات على سلوك كل من B(E2) ↑ e2b2 وβ في المتسلسلات الايزوتونية لنوى 48Cd , 50Sn و46Pd يعطي معلومات جيدة حول التشوه في النوى.تركزت دراستنا على ثلاث انواع مختلفة من النوى, الاول بعدد ذري سحري50 , والثاني بعدد ذري شبه سحري 48, والثالث بعدد ذري بين القشرات المغلقة 46.في نهاية العمل الحالي تم عمل مقارنة جيدة للحسابات الحالية لقيم احتمالية الانتقال المختزل B(E2) ↑ e2b2 وعامل التشوه β مع معظم القيم العملية والنظرية الحديثة. | Electromagnetic properties for even - even nuclides in neutron - rich nuclei such 50Sn, 48Cd and 46Pd have been studied through the electric quadruple transition strength |M(E2)|2 W.u ↓ and the reduced transition probability B(E2)W.u ↓for γ0 - transition from first excited state to the ground state. The electric quadruple transition strength |M(E2)|2 W.u ↓ is calculated by using life - time for excited state with the intensity of γ0 - transition, while B(E2)W.u ↓ is extracted from half - life time to state corrected for internal conversion coefficient. To obtain precise value for the transition of E2↓, the adopted value for |M(E2)|2 W.u ↓ and B(E2)W.u ↓ was calculated and plotted as a function for neutron number. In present work, the adopted values for the transition of E2↓ are converted to B(E2)exp ↑ e2b2 which helped us to study the structure for nucleus, such as the variation in shape, because the deformation parameter β is extracted from B(E2) ↑ e2b2 and the study for behavior of each of B(E2) ↑ e2b2 and β versus neutron number in isotonic chains to 50Sn, 48Cd and 46Pd gives good information about the deformation in nuclei. Our study focused on the three different types of nuclei, the first with atomic magic number 50, the second with semi - magic atomic number 48 and the third nucleus with atomic number between closed shells 46. At the end of the present work, the good comparisons for the present calculation to the values of the B(E2) ↑ e2b2 and β with most recent values of experimental and theoretical was done.

تصميم مراة ايونية تعمل كمصحح للزيوغ باستخدام طريقة القيم الحدودية DESIGN OF ION MIRROR AS AN ABERRATION CORRECTOR USING BOUNDARY VALUES METHOD

اسم المؤلف: محمد سلام مزاحم العبيدي
الموضوع العام: علوم الفيزياء
السنة: 2007
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

تصحيح الزيغ بسبب عدم التراصف في العدسات الكهروسكونية THE ABERRATION CORRECTION DUE TO MISALIGNMENT IN ELECTROSTATIC LENSES

اسم المؤلف: رؤى تحسين عبد الله الصميدعي
اسم المشرف: احمد كمال احمد
الموضوع العام: علوم الفيزياء
السنة: 2006
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: اجري بحث حاسوبي في مجال بصريات الجسيمات المشحونة. يهتم البحث بتصميم منظومات عدسات كهروسكونية بوجود وعدم وجود تاثير عدم التراصف تعمل تحت ظروف تكبير مختلفة.ان توزيع مجال الجهد لعدسه احادية الجهد وعدسة مغمورة كهروسكونية تم تمثيله بدوال تحليلية. تم حل معادلة الاشعة المحورية للمجالات المقترحة لايجاد مسار الجسيمات المشحونة المارة في كل عدسة. ومن توزيع الجهد المحوري ومشتقتيه الاولى والثانية .تم حساب الخواص البصرية كالبعد البؤري والزيغين الكروي واللوني. كذلك تم ايجاد شكل اقطاب كل عدسة كهروسكونية ببعدين وبثلاثة ابعاد. ويعتمد الزيوغ في العدسات الكهروسكونية اعتمادا كبيرا على تراصف الاقطاب، وقد وجد انه عامل مهم يؤثر على الشكل الهندسي لمنظومة العدسة الكهروسكونية. ان نتائج هذه الدراسة لا تبرهن نظريا" امكانية تصميم منظومات عدسة كهروسكونية بزيوغ واطئة فحسب بل تبين امكانية تصنيع مثل هذه العدسات عمليا". | A computational investigation has been carried out in the field of charged - particle optics. The work is concerned with the design of electrostatic lenses with and without misalignment effect operated under different magnification conditions. The potential field distributions of einzel and immersion electrostatic lenses have been represented by analytic functions. The paraxial ray equation has been solved for the proposed fields to determine the trajectory of the charged particles traversing each lens. From the axial potential distribution and its first and second derivatives, the optical properties such as the focal length and spherical and chromatic aberrations have been compute. The electrode shape of each electrostatic lens has been determined in the two - and three - dimensions. The aberration of the electrostatic lens is highly dependent on the alignment of the electrodes and it has been found to be an important parameter affecting the geometry of the electrostatic lens system. The results of this investigation not only prove in theory the possibility of designing electrostatic lens systems with low aberration but also show the possibility of constructing such lenses in practice

دراسة النشاط الاشعاعي لنماذج من التربة والماء في بغداد وكربلاء والبصرة Determination of the Radioactivity in Soil and Water in Baghdad, Karbala and Basrah Samples

اسم المؤلف: مصطفى عرب بداي علي البيضاني
الموضوع العام: علوم الفيزياء
السنة: 2006
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يتضمن البحث دراسة عملية لتحديد تراكيز اليورانيوم وغاز الرادون في التربة والماء لمناطق من بغداد وكربلاء والبصرة وللتعرف على مدى تلوث تلك المناطق بالمواد المشعة بعد احداث الحرب على العراق عام 2003 .تضمن الجزء الاول ايجاد تراكيز اليورانيوم في التربة والماء باستخدام كاشف الاثر (CR - 39) حيث استخدم التفاعل U - 235(n,f)U - 236 كمصدر لشظايا الانشطار النووي وذلك بقصف نواة اليورانيوم U - 235 بالنيوترونات الحرارية من المصدر النيوتروني (Am - Be) بفيض نيوتروني حراري (5 ×103 n cm - 2 s - 1) .تم تحديد التراكيز بالحسابات المعتمدة على المقارنة مع النماذج القياسية، وقد اوضحت النتائج التي حصلنا عليها ان اعلى تركيز لليورانيوم في التربة (2.73 ppm) في منطقة التاجي واعلى تركيز لليورانيوم في الماء (2.12 ppm) في منطقة العشار. تضمن الجزء الثاني ايجاد تراكيز غاز الرادون في التربة والماء باستخدام تقنية عد اثار جسيمات الفا المنبعثة من غاز الرادون فيكاشف الاثر (CR - 39) .وقد اوضحت النتائج التي حصلنا عليها ان اعلى تركيزلغاز الرادون في التربة (666 Bq/m3) في منطقة التاجي واعلى تركيز للرادون في الماء (14 Bq/m3) في منطقة العشار. اوضحت النتائج التي حصلنا عليها بان اعلى تراكيز لليورانيوم والرادون كان في منطقة التاجي ببغداد وفي منطقة العشار بالبصرة بسبب كون تلك المناطق مسرح للعمليات الحربية ضد العراق عام 2003 . | The aim of this project is to measure the uranium and radon gas concentrations in soil and water samples taken from regions situated in Baghdad, Karbala and Basrah, and to limit the level of contamination with radionuclides for these regions during the 2003 war.The first part contains the determination of uranium concentration in soil and water samples using CR - 39 Track detector. The nuclear reaction used a source of nuclear fission fragments is 235 - U (n , f) obtained by the bombardment of U - 235 with thermal neutrons from (Am - Be) source which has flux of (5 ×103 n cm - 2 s - 1). The concentrations values were calculated by a comparison with standard samples which prepared in our laboratory.The results obtained show that the higher concentration of uranium in soil samples was (2.73 ppm) in Al - Tajii region, and the higher concentration for water samples was (2.12 ppm) in Al - Ashaar region.The second part contains the determination of radon concentration in soil and water samples using alpha - emitters registration which emits from radon gas in (CR - 39) track detector.The results show that the higher concentration for radon gas in soil samples was (666 Bq/m3) in Al - Tajii region and in water samples was (14 Bq/m3) in Al - Ashaar region.The results show the maximum values of uranium and radon concentrations were in the (Al - Tajii and Al - Ashaar) regions, because these regions were a field of military operations during the 2003 war

نظام اخفاء البيانات ذو معدل اخفاء عالي باستخدام تحويل الافين وطريقة البت الاقل اهمية High Hiding Rate Image Steganography System Based On Affine Transform and LSB Method

اسم المؤلف: محمد خليل خلاف سهيل القيسي
اسم المشرف: لؤي ادور جورج اياد عبد العزيز العاني
الموضوع العام: علوم الفيزياء
السنة: 2008
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The spying and intrusion operation had been widely spread to steal the information especially with the development of computer networks (like, Internet). To prevent this danger the development of a new technology called “digital information hiding” was developed in such a way that the intruder cannot notice the existence of secret information in the media.In this project an image steganograph system is introduced. The proposed system is based on using the affine transform to represent the blocks of the secret image in terms of the blocks of the cover image. Then, the least significant bits (LSB) insertion method is utilized to hide the quantized affine transform coefficients of the secret image in the cover image. Also in this research some block indexing methods are utilized to improve (i.e, speed up) the involved trials of affine mappings. Three systems (they are traditional IFS, IFS with symmetry predictions, and IFS with symmetry prediction and blocks indexing) have been established. They used to manage the way of selecting the suitable domain (cover) to represent the range (secret) block. The domain search operation will not need to make all isometric - block tests on each domain block. The best domain isometric state is assessed using the introduced isometric predictor; which is based on the moment status of the matched block. This will significantly reduce the matching time because only one match, instead of eight, will be tested to evaluate the IFS - similarity between any range and domain block. Also, a block indexing method is introduced to filter the domain blocks, and filter - in only those domain blocks that have similar block index with that of the mapped range block to be tested using IFS - matching.Some of the well known fidelity measures (like, MSE and PSNR) have been used to asses the quality of the reconstructed image. The conducted test results indicated that the proposed improvements have reduced the required hiding time down to 6.81 second (around 80 times in comparison with the traditional scheme) without making significant degradation in image quality

تاثير نسب ومعاملات الحزم على دقة تصنيف صور الاقمار الصناعية المتعددة الاطياف Effect of Band Ratios and Indices on Classification Accuracy of Multispectral Satellite Images

اسم المؤلف: سيف كامل شنين
اسم المشرف: اياد عبد العزيز العاني صلاح عبد الحميد صالح
الموضوع العام: علوم الفيزياء
السنة: 2008
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Multispectral satellite images are holding whole information about the areaunder investigation. Many of digital processing techniques are used to extractmost of the possible information from these images, such these techniques arespectral band ratios, Tasseled Cap transformation and Principle ComponentAnalysis (PCA). These techniques are play good part for features extraction andreducing the number of spectral bands with no loses in information.The research aims to apply classifications on band ratios and image indiceswhich include PCA and Tasseled Cap transformations, of Enhanced ThematicMapper Plus (ETM+) satellite images, and to show how the accuracies of theclassification are differ from the accuracy of classification of the raw ETM+ bandsimages.The results show that the best bands ratios that adopted to represent fiveselected land features are 5/7, 4/5, 2/5, 1/4, and 2/4. Optimum Index Factormethod (OIF) has been adopted on raw bands combinations, and on the bandsratio combinations to select which band combination that contains muchinformation, where the results show that the best combination for raw bands is3 - 4 - 7, and best combination for ratios band is 4/5 - 1/4 - 2/5.Iterative Self Organizing Data Analysis (ISODATA) method has beenadopted as unsupervised classification, and Maximum Likelihood method assupervised classification. The overall accuracies are 87.18%, 89.45%, 89.26%,and 89.52% for raw bands, band ratios, Tasseled Cap, and PCA respectively,which showed that transformation techniques give good spectral enhancementsand feature extraction which are undistinguishable in raw image, and representgood tools to increase the accuracy of classification.

تحضير اوكسيد القصدير ذو التراكيب النانوية على اوكسيد الالمنيوم المانود بطرق مختلفه Synthesis of SnO2 nanostructure on anodic aluminum oxide by different method

اسم المؤلف: رحمه سعد محمد العبيدي
اسم المشرف: رعد سعدون صبري
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم تحضير قالب اوكسيد الالمنيوم المانود بعملية الانودة بخطوتين للحصول على افضل ترتيب للمسامات باستخدام حامض الاوكزاليك بشروط تحضير مختلفة مثل درجة حرارة المحلول (10,7و 15 درجة سيليزية) وفولتيات الانودة (30 و40 فولت.(نتائج المجهر الالكتروني الماسح للقالب المحضرعند 30 فولت بينت ان المسامات ذات قطر صغير وترتيب ضعيف. بينما 40 فولت , المسامات ذات قطر اكبر وذات ترتيب عالي. من خلال هذه الدرجات الحرارية الثلاثة المختلفة (10,7و 15 درجة سيليزية). وجد ان (10 درجة سيليزية) هي افضل درجة حرارية لتحضير مسامات ذات ترتيب عالي. اذا درجة الحرارة ازدادت فان قطر المسام سوف يزداد . عامل الوقت مهم جدا في هذه العمليه عندما وقت الانودة يقل فان اوكسيد الالمنيوم المانود اصبح رقيق جدا وهش ويتكسر بسهوله جدا وبالتالي ستكون هناك صعوبة في استخدامه كقالب ترسيب. عندما الوقت يزداد لاكثر من 12 ساعة في الانوده الثانيه فسمك القالب يصبح حوالي 44 مايكرو متر سيعطي افضل شرط لترسيب اوكسيد القصدير. في هذا البحث اربع طرق استخدمت لتحضير اوكسيد القصدير بشكل قضبان نانوية باستخدام قالب اوكسيد الالمنيوم المانود مثل طريقة الصول - جيل ,تقنية التغطيس والفلترة ,التفريغ والتقطير وطريقة التبخير الحراري. جميع نتائج فحوصات الاشعة السينية لكل طرق التحضير تبين ان اوكسيد القصدير هو تركيب متعدد التبلور وذات تبلور متجانس. طرائق تحضير الصول - جيل والتبخير الحراري تبين ان القضبان النانوية لاوكسيد القصدير لها نفس القطر والطول وافضل ترتيب واكثر تجانس . بينما القضبان النانوية لطرائق التحضير الاخرى تختلف في القطر والطول. | Anodic aluminum oxide (AAO) was prepared by anodization process with 2 - step to obtain the best order arrangement of pores using oxalic acid at different preparation conditions such as electrolyte temperature (7, 10 and 15 °C) and anodization voltages (30 and 40 V). SEM results of the template which prepared at 30V showed the pores with small diameter and poor order. While at 40V, the pores with large diameter and high quality order pores. From three different temperatures (7, 10 and 15 °C), it's found that 10°C is the best temperature to prepare high quality order pores. If the temperature increases, the pore's diameter will increase. The time factor is very important in this process; when the anodization time decrease, AAO becomes very thin, brittle and can break very easily. Thus, there will be a difficulty to use as a deposition template. When the time increase more than 12 hr in second anodization, the template thickness's will become 44µm which gives the best condition to deposit SnO2. In this research, four methods used to prepare SnO2 nanorods by using AAO template such as the sol - gel, immerse and filtration technique, vacuum and drop setting and thermal evaporation. The whole results of XRD for all preparation methods showed that SnO2 is polycrystalline and homogeneous crystal. The sol - gel and thermal evaporation methods revealed the SnO2 nanorods have the same rod's diameter, length, best order and highly homogeneous. While the nanorods of other preparation methods are different in diameter and length.

تحضير ودراسة الخواص الكهربائية والبصرية لاغشية NiO الرقيقة غير المشوبة والمشوبة بالنحاس لتطبيقات متحسس الغاز Preparation and study the electrical and optical properties of undoped and Cu doped NiO thin films for gas sensor applications

اسم المؤلف: رانيا رعد كاظم الكناني
اسم المشرف: انوار حسين علي الفؤادي
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في العمل الحالي، تم تحضير اغشية رقيقة جيدة باستخدام تقنية منخفضة التكلفة وهي الرش الكيميائي الحراري, تم قياس الخصائص التركيبة , البصرية والكهربائية, والتحسسية لاغشية اوكسيدالنيكل غير المشوبة والمشوبة بالنحاس عند النسب ((1%,3%,5%,7%المرسبة على قواعد زجاجية مسخنة ب درجة حرارة c o (10 ± 400) وبسمكnm ( 10± 250 ) ، من حيود الاشعة السينية وجد ان جميع الاغشية النقية والمشوبة لها تركيب مكعبي , وبصورة عامة هناك زاويتي حيود عند المدى الزاويo 30 - 60)) تعود للسطحين (111)و(200) . وجد ان الحجم الحبيبي يزداد مع زيادة نسب التشويب حتى نسبة 3% ثم تنخفض قيمته عند النسب 5%, 7% ,ومن خلال قياسات ماسح القوة الذرية AFM وقياسات المجهرالالكتروني الماسح SEM تم التعرف على تاثير التشويب على جميع خواص الاغشية, كما تبين من نتائج التشويب ان زيادة التشويب تؤدي الى االزيادة في الحجم الحبيبي عند النسب (1%و3%) ثم ينخفض عند النسب (5% و7%). اشتملت الرسالة دراسة الخواص البصرية لاغشية اوكسيد النيكل غير المشوبة والمشوبة بالنحاس , وتبين ان فجوة الطاقة تقل من3.8 - 2.8) ev ) بزيادة نسبة التشويب. وجد ان الاغشية لها معامل امتصاص عالي cm(α>10 ) الذي يؤدي الى زيادة احتمال حدوث الانتقالات المباشرة بين المستويات البلورية وبينت النتائج ان معامل الامتصاص يزداد مع زيادة نسب التشويب. وقد اظهرت نتائج الخواص الكهربائية (D.C) زيادة التوصيلية الكهربائية مع زيادة التشويب لتصل اعلى قيمة لها عند نسبة 7%. وقد وجد ان لجميع الاغشية طاقات تنشيط تقل مع زيادة نسبة التشويب. من قياس تاثير هول وجد ان تحركية حاملات الشحنة تقل وتركيز الحاملات تزداد مع زيادة نسب التشويب . اما خصائص التحسسية لجميع الاغشية المحضرة تم قياسها للابخرة (NH ,H O )عند تراكيز مختلفة ppm(100,200,300) عند درجة حرارة ,150° c واظهرت النتائج ان افضل تحسسية كانت عند نسبة تشويب 5% لبخار NH , وقد وجد ان هناك زيادة خطية للتحساسية مع زيادة تركيز البخار. وهذا بسبب زيادة كمية البخار الذي يتفاعل مع سطح الغشاء الرقيق. | In the present work, a good adherent and smooth films of undoped and copper doped NiO have been prepared by using low cost spray pyrolysis technique at different percentage of copper concentration ,structural, optical, electrical, and sensing properties have been studied at different concentrations of Cu (1% ,3%,5%,7% ) deposited on glass substrate at temperature (400±10) oc with (250±10)nm thickness . From the X - ray diffraction investigation, the crystalline structure of thin films was a polycrystalline with a cubic structure , generally the peaks of the NiO and NiO : Cu thin films were observed at diffraction angles at the range (37°and 43°). All NiO : Cu thin films display peaks of (111), (200) and Cu peaks do not appear even after adding a higher quantity of Cu into the NiO films, the angle position of peak (111) shifted toward lower value with doping in Cu at 1%,3% then start to increases at 5%,7% concentration,resulting in the increasing of lattice constant (a),interplaner spacing (d) and crystallite size (D),then decreases due to the degradation in the crystallinity of NiO doped with 5%,7% respectively,surface analysis by SEM and AFM have been used to understand the effect of the doping on morphology properties of the samples. The doping resulted in increasing grain at doping rates (1%,3%), then decreases at doing rates (5%,7%). The measurements of optical properties of undoped and copper doped NiO films decreased with increasing the doping rate.Also the results have showed that absorption cofficient increases with doping to reach maximum value at 7% concentration .The energy gap of was calculated for undoped and copper doped NiO films,it is noticed that the energy gap decreases with the increases of doping until it reaches the minimum value at 7% doping concentration .The D.C measurements show that the resistivity decreased with increasing doping rate,also the hall measurements have been showed the carrier concentration increased with increasing doping rate. The AFM results reveal that the grain size increases with the increase in copper concentration at rates (1%,3%) and then decreased at rates (5%,7%).The sensing measurements showed that undoped and copper doped NiO thin films have high sensitivity to NH vapor as compared to H O vapor , and the best result was 26% at doping rate 5% at 300ppm vaopr concentration ,at operation temperature 150 o c for NH vapo

تصنيع كواشف ضوئية باستخدام اوكسيد التيتانيوم المطعم باوكسيد الخارصين ذو التركيب النانوي بواسطه تقنية الليزر النبضd Fabrication of photovoltaic detectors using TiO2 doped with ZnO nanostructure by PLD technique

اسم المؤلف: ذرى طارق عباس
اسم المشرف: سمر يونس الدباغ
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: In this work, a Nd : YAG laser beam (λ=1064nm, repetition rate 6 Hz with the pulse duration 10ns) has been used to deposit thin films TiO2 pure and TiO2 doped with ZnO at different concentrations (2%, 5%, 7%) on glass and silicon substrates. The laser fluence is kept at 700 mJ/cm2 and the pressure is kept at 10 - 2 mbar to specify the optimum condition of deposition. TiO2 - ZnO thin films are investigated by using different techniques such as X - Ray Diffraction (XRD), Atomic Force Microscope (AFM), UV - VIS transmittance spectroscopy, Hall Effect and detector properties equipment.X - Ray Diffraction (XRD) results showed that by increasing ZnO concentration and annealing temperature (500°C) TiO2 transformed from amorphous structure to polycrystalline structure. AFM results showed that the RMS and the grain size was increased with increasing the concentration of zinc oxide. The root mean square (RMS) reachs to 15.2 nm at room temperature and after annealing temperature at 500°C reachs to 16.1nm. Also, the grain size increased with increasing ZnO concentration up to (100.12) nm at the concentration 7% after annealing temperature. UV - VIS transmittance measurements show that the transmittance were high in infrared region and decreases with increasing ZnO concentration and after annealing. Hall Effect is studied to estimate the type of carriers. From the results it was deduced that all (TiO2 : ZnO) films were n - type. As a result, it has been found that film structure and properties are dependent on annealing , as well as different concentrations.From the (I - V) measurements by using UV laser diode with a wavelength (385nm) found that the responsivity of the detector increased at concentration 7% reach to (3.39)A/W and after annealing in temperature 500°C reach (3.82)A/W.

دراسة تاثيرات خسارة الانحناءات لليف البصري في منظومة الاتصالات البصرية Study Effects of Optical Fiber Bending Loss in Optical Communication System

اسم المؤلف: دعاء هشام محمد
اسم المشرف: سمر يونس الدباغ
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا البحث , تم دراسة تاثير الانحناء على انتقال الاشارة الضوئية خلال الالياف البصرية. هذا العمل يتضمن قياسات الخسارة في القدرة خلال الليف البصري بوجود الانحناءات عند عدد لفات مختلفة من (1 - 10) لفة وعند اقطار انحناء مختلفة (12.5 , 10.5 , 8 , 6 , 4 , 3 , 2 , 1) cm. نوعين من الالياف البصرية تم استخدامها , الليف المتعدد الانماط (MMF ) باطوال مختلفة (1 , 20 , 40 , 100 , 120 , 140 ) m وليف احادي النمط بطول (4.5 m) .واستخدم نوعين من الليزرات ليزر دايود الاحمر (λ=650 nm) وليزر دايود اخضر (λ=532 nm).القدرة الضوئية تم قياسها باستخدام جهاز قياس القدرة. تشير النتائج ان كلما قل قطر الانحناء وزادت عدد اللفات فان الخسارة في القدرة الضوئية تزداد. حيث ان القدرة الضوئية لليزر الاخضر عند الطول الموجي (λ=532 nm) تقل من (48.083*10 - 4) mW الى (41.114*10 - 4) mW عند اللفة الاولى لليف متعدد الانماط بطول (40m) عندما تم حني الليف من cm12.5 الىcm 1. اما لليف الاحادي النمط, فان القدرة الخارجة لليزر الاخضر عند طول موجي (λ=532 nm) تقل من (13.608) mW الى (13.32) mW عند اللفة الاولى من طول (4.5) m لليف احادي النمط عندما تم حني الليف من 12.5 cm الى 3 cm . اظهرت النتائج ايضا ان تاثير الانحناء في القدرة الخارجة في حالة الليف المتعدد الانماط اكبر مقارنة بالليف احادي النمط. وكذلك النتائج لهذا البحث تتضمن تصميم وتنفيذ منظومة اتصال الالياف البصرية لفحص تاثير الانحناء على الاشارات المنتقلة خلال الالياف البصرية متعددة الانماط حيث لف من (1 - 10) لفة وعند اقطار انحناء مختلفة ( 1,2,3,4 ) cm . تم تضمين الاشارات باستخدام ليزر nm 532 .الاشارة تم ارسالها خلال ليف متعدد الانماط باطوال مختلفة وهذه الاشارة تم الكشف عنها باستخدام كاشف السليكون الضوئي (AEPX 65) . وجد ان الانحناءات تؤدي الى تغييرات واضحة في سعة ( جهد ) الاشارة الخارجه ؛ حيث يقل الجهد من 0.64volt الى 0.52 volt عند زيادة عدد اللفات من) 1 - (10 لفة في ليف بطول 40m وقطر الانحناء (1) cm.ويقل الجهد الى حد 0.2 volt في ليف بطول 140m وقطر الانحناء (1) cm.واخيرا الاشارات المنتقلة فيمنظومة الياف بصرية باستخدام كاميرا (CCD) واستخدام حاسبة شخصية معUSB TV STICK لرؤية تاثير الانحناء على انتقال الاشارات خلال الالياف البصرية. حيث ان الاشارة الخارجة ستقل من 0.68 volt الى 0.6 volt عندما عدد اللفات تزداد من (1 - 5) لفة في ليف بطول (1) m .اجرى احتساب كل من نسبة الاشارة الى الضوضاء ومعدل الخطا في نقل البيانات في للاشارات المنتقلة في منظومة الاتصالات عند اقصى طول لليف البصري 140m وعند اللفة 10 فكانت 115.147dB و3.68x10 - 27 على التوالي . بينما نسبة الاشارة الى الضوضاءSNR ومعدل الخطاBER في نقل البيانات في الاشارات المنتقلة باستخدام كاميرا CCD عند طول الليف البصري 1m وعند اللفة 10 فكانت 100.49dB و5.98x1o - 24 على التوالي .. اظهرت النتائج ايضا ان نسبة الاشارة الى الضوضاء تقل ومعدل الخطا في نقل البيانات يزداد بزيادة عدد اللفات في كلا المنظومتين | In this work, bending loss effects of optical fiber on the transmitted signal were studied.This work includes measurements of the power loss through optical fiber with the presence of bends at different wrapping turns (1 - 10) turns and at various bending diameters (12.5, 10.5, 8, 6, 4, 3, 2, and 1) cm. Two types of optical fibers were used, multimode optical fiber (MMF) of different lengths (1, 20, 40, 100, 120, 140) m and a single mode optical fiber (SMF) of length (4.5 m). Two optical sources were used, Red laser diode (λ=650 nm) and green laser diode (λ=532 nm). The output power was measured using an optical power meter. Results indicated that as the bending diameter decreased and the number of wrapping turns increased, the power loss increased. The output power of green laser diode at (λ=532 nm) decreased from (48.083*10 - 4) mW to (41.114*10 - 4) mW at the first turn of 40m MM fiber length when bent from (12.5 to 1) cm. For SMF, the output power of green laser diode at (λ=532 nm) decreased from (13.608) mW to (13.32) mW at first turn of (4.5) m SM fiber length when bent from (12.5 to 3) cm. The higher alteration output power in the case of multimode fiber has been deduced as compared with that of the single mode fiber. Also the results of the project involves a design and an implementation optical fiber communication system to investigate the effect of bending on the transmitted signals through multimode optical fiber wrapped (1 - 10) turns and at different diameters (1, 2, 3, 4) cm . Signals were modulated using 532nm laser diode then sent through multimode fiber of different lengths and detected by silicon photo detector (AEPX 65). The bending induces changes in the amplitude (voltage) of the output signal, the output voltage decreased from 0.64 volt to 0.52 volt when the no. of turns increased from 1 - 10 turns for 40 m optical fiber at a bending diameter of (1cm) and decreased to 0.2 volt for 140m multimode fiber at a bending diameter of (1cm).Finally, a transmitted signal in optical communication system has been built using CCD camera and Pc with USB TV STICK for monitory the effect of bending on signals that transmitted through optical fibers. The output transmitted signals decreased from 0.68 volt to 0.6 volt when the no. of turns increased from 1 - 5 turns for 1 m optical fiber. The calculations of signal to noise ratio (SNR) and Bit Error Rate (BER) for transmitted signals in optical communication system at maximum fiber length of 140m and 10turns are equal to 115.147dB and 3.68x10 - 27 respectively. While for transmitted signal form CCD camera at fiber length 1m and of 10 turns are equal to 100.49dB and 5.98x1o - 24 respectively.Results show that SNR decreased and BER increased as no. of wrapping turns increased for both systems.

محاكات الهوائي الكسوري باستخدام منحني كوج ومينكوسكي Simulation of Fractal Antenna Using Koch and Minkowiski Curves

اسم المؤلف: خضير عباس قنبر
اسم المشرف: كاظم جواد كاظم الشجيري
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: الهوائي عنصر رئيسي في الاتصالات اللاسلكية فهو الادات التي تستقبل وترسل الموجات الكهرومغناطيسية في الفضاء الحر. ان التوسع الهائل في الاتصالات اللاسلكية بحاجة الى هوائيات متعددة الحزم وصغيرة الحجم وبمقطع جانبي منخفض ومن اجل تطوير اداء الهوائيات استخدمت الهندسة الكسورية لتحسين خواصها . والتي تجعل الهوائي متعدد الوظائف . في هذة الرسالة استخدمت تقنية جديدة لتحسين اداء الهوائيات الكسورية ثنائية القطب باستخدام عاكس كسوري متحرك. استخدمت الحقيبة البرمجية 4NEC2 لمحاكاة اول ثلاث تكرارت لهوائيات منحني Koch ومنحني Minkowski قبل وبعد اضافة العاكس الكسوري . ومن اجل تصميم الهوئيات بدقة عالية استخدم البرنامج Adobe illustrator CS4 لرسم جميع الهوائيات المقترحة . ومن نتائج المحاكاة لوحظ ولجميع الهوائيات ان العاكس الكسوري المتحرك حسن من قيمة VSWR (نسبة فولتية الموجة الواقفة) والكسب والتوجية وكذلك زاد الترددات الرنينية المفيدة للتكرارات الثلاثة لمنحني Koch . حيث اضاف تردد رنيني مفيد للتكرار الاول وترددين رنينيين مفيدين للتكرار الثاني وتردد رنيني للتكرار الثالث كذلك اضاف ترددين رنينيين مفيدين للتكرار الثالث لمنحني Minkowski . | Antenna is the main element in wireless communication. It is the instrument which receives and transmits the electromagnetic wave in a free space. The great expand in wireless communications need antennas with multiband, small size and low profile. In order to develop the performance of antennas, fractal geometry is used to optimize the property of the antenna. It makes antenna multi - functional. In this thesis a novel technique is used to optimize the performance of fractal dipole antennas by using a movable fractal reflector. 4NEC2 software package is used to simulate the first three iterations for (Koch curve and Minkowiski curve) antennas before and after adding the fractal reflector. In order to design fractal antennas with high accuracy, Adobe illustrator CS4 software program is used to draw all proposed antennas. From simulation results and for all proposed antennas are observed the movable fractal reflector optimize the value of voltage standing wave ratio VSWR, gain and directivity. Also, it increases the benefit resonant operating frequencies for all three iterations of the Koch curve. It adds one benefit resonant frequency to the first iteration and two benefit resonant frequencies to the second iteration and one benefit resonant frequency to the third iteration. Also, it adds two benefit resonant frequencies to the third iteration of Minkowiski curve

غشاء ZnO - SnO2 وخصائصه التحسسية ZnO - SnO2) Thin Film and Their Sensing properties

اسم المؤلف: خالد وليد صابر
اسم المشرف: علي جاسم محمد الجابري
الموضوع العام: علوم الفيزياء
السنة: 2013
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ZnO,SnO2,Zno - Sno2 composite( ل في هذا البحث تم دراسة الخصائص التركيبية والتحسسية على توالي والمحضرة على قواعد قواعد زجاجية بظروف ترسيب مختلفة من نسب المواد (100% : 0%,0% : 100%, 50% : 50%, 30% : 70% , 10% : 90% ) وبدرجة حرارة القاعدة ( 400 & 450 ) سيليزية وبزاوية رش ( 0& 45 ) درجة. بينت فحوصات تقنية حيود الاشعة السينية (XRD) لتشخيص طبيعة تبلور الاغشية المحضرة, ان جميع الاغشية المحضرة ذات تركيب متعدد التبلور من نوع سداسي hexagonal)).مع اتجاهيه (002 ) للعينات المحضرة ل) ( ZnO,ZnO : SnO2 compositeما عدا (SnO2 ) فهو ذو تركيب متعدد التبلور من النوع الرباعي ( tetragonal ) مع اتجاهية ( 110 ) ، كما اظهرت النتائج الحصول على التركيب نانوي بمعدل حجم حبيبي ( من 2.4 الى 46 نانو) وتجانس منتظم بواسطة اضافة اوكسيد القصدير الى اوكسيد الزنك ، وهذا اعطى تبلور عالي مع ظروف الترسيب المختلفة. بواسطة تحليل السطح بواسطة المجهر الالكتروني الماسح ( SEM ) ومجهر القوة الذرية ( AFM ) تم التعرف على تاثير ظروف الترسيب المختلفة على خصائص تشكل العينات ، اظهرت صور (SEM ) تراكيب مختلفة مثل الابر والالياف والقضبان السداسية النانوية و(rich particle ) كما اظهرت النتائج التجانس والتوزيع المنتظم والنمو العالي ، كذلك زيادة معدل الحجم الحبيبي وزيادة الخشونة وهذا يقود الى الحصول على مساحة سطحية عالية وتاثير كبير على التحسسية .كل القياسات التحسسية اظهرت تحسسية عالية عند درجة حرارة القاعدة ( 450 ) سيليزية بزاوية رش (45 ) درجة ونسبة (SnO2 50% : % 50 ZnO) وعند زيادة نسبة ( ZnO ) لتصبح (100 % ) فان التحسسية تقل. ان العامل المؤثر على التحسسية هو نسبة المواد الداخلة في تركيب الاغشية الرقيقة كافضل نسبة حجمية 50)٪ 50 : ٪( وعند زيادة نسبة لتصبح 100٪ اوكسيد الزنك فان التحسسية تقل . اوكسيد الزنك لديه تحسسية عالية، ولكن عندما يخلط مع SnO2، وهذا يؤدي الى زيادة تحسسية وهذا واضح من خلال النتائج المستحصلة. | In this work, structural and sensing properties have been studied for ZnO, SnO2 compound and ZnO - SnO2 composite thin films. They were prepared by spray pyrolysis technique deposition at substrate glass, were used different deposition conditions, volume ratios(100% : 0%, 0% : 100%,50% : 50%, 70% : 30%, 90% : 10%,), Substrate temperature ( 400)&(450) oC , incident angle spray of spray pyrolysis (0) & (45) .. The X - ray diffraction technique has showed that all prepared films are polycrystalline structure with hexagonal type that preferred orientation of plan (002) direction for all thin film prepared for ( ZnO compound, ZnO - SnO2 composite thin films) except SnO2 thin films are polycrystalline structure with tetragonal type with preferred orientation of plan (110) , the results obtained by X - ray diffraction showed that we get the installation of nano structure with average grain size between ( 2.4 to 46 nm) and uniform Homogeneity by added tin oxide to zinc oxide, the results show high crystalline with deferent conditions deposition. Surface analysis by SEM and AFM have been used to understand the effect of the different conditions deposition on morphology properties of the samples. The SEM micrographs show needle - like, fiber - like , hexagonal nano rods, rich particles ( high growth) and homogeneity , uniform distribution, high growth. The results showed an increase of the average grain size with increasing roughness and this leads to obtain a high surface area and large effect on sensitivity. Overall measurements sensing showed that the highest of sensitivity at substrate temperature (450 oC) ,incident angle spray pyrolysis (45) with ratio ( 50% : 50%) . The influencing factor on sensitivity is the ratio of materials involved in the structure of thin - film as the best volume ratio its (50% : 50%) and when you increase the ratio to become 100%ZnO the sensitivity decreases. ZnO has high sensitivity, but when mixed with SnO2, this leads to increase sensitivity and this is clear from the results that were obtained.

قياس تراكيز غاز الرادون ووليداته وتقييم التعرض في ابنية كلية العلوم في الجامعة المستنصرية Measurement of Radon and Daughters Concentrations and Exposure Assessment in the Buildings of the Science College at AL - Mustansiriyah University

اسم المؤلف: حيدر عيد فاضل
اسم المشرف: ايمان طارق العلوي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The concentrations of Radon gas and their progeny have been measured in the building of Al - Mustansiriyah University College of Science. Deanship building, four flowers, includes dean office and administrative staff in addition to the department of mathematics, department of biology, lecture rooms and laboratories affiliated in addition to the basement of the Deanship building, building of department of chemistry libraries, building of department of physics libraries, and building of meteorology or atmospheric Science (in which the detectors have been suspended, but most of them had been lost because of the maintenance work, which cooperated with the preparation of this study).The nuclear track detector of solid state CR - 39 technique has been used to study the trace effect. 356 detectors have been suspended and distributed (two detectors) in each location under study. Detectors with 1cm x1cm area have been suspended with two heights; the first height represents the sit down mode and the second represents the standing mode, for a period of 90 days except those for the department of chemical libraries because of an official holiday in the Al - Mustansiriyah University.The dosimeters have been design to be adequate for the research environment. The samples are collecting after exposing time for the period mentioned above, then applying the chemical etching and Statistics numerical process the density of the nuclear has been calculated in order to calculate the concentrations of Radon and their daughters. The calibration process has been made in this work by exposing other detectors (similar of that used for the detecting) to Radium - 226 source with known activity radiation.It was found that all concentrations are within the world wide limits. It has been found the Radon concentrations in the basement of Deanship building are relatively higher than in other location have been observed. These concentrations are decreasing gradually with height to reach the lowest value at the fourth floor. It strengthens that the Radon gas is heavier than air. The yearly effective dose of the exposure to Radon has been calculated. The Radon concentration is within the world wide permissible limits.

الخواص الالكترونية لمادة هجينة مركب ثلاثي - خماسي/كرافين : حسابات نظرية دالية الكثافة Electronic Properties of III - V Compound / Graphene Hetero Material : Density Functional Theory Calculations

اسم المؤلف: حوراء علي عبد الرضا
اسم المشرف: حامد ابراهيم عبود محمد التميمي صباح نوري مزهر
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: فيزياء الالكترونيات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: هذه الاطروحة هي دراسة نظرية للخصائص التركيبة والالكترونية لمجموعتين من اوراق الجرافين. وتضمنت المجموعة الاولى ثلاثة اوراق جرافين نقية ذات اطوال مختلفة GR1 ˃ GR2 ˃ GR3، وتمثل المجموعة الثانية ثلاثة اوراق متغايرة من جرافين - مركبات B/P والتي تم بنائها اعتمادا على GR1. تم تنفيذ العمليات الحسابية باستخدام تقريب الكثافة الموضعي / LDA / SZ لنظرية دالية الكثافة. وقد استخدم برنامج Gauss View 5.0.8 لتصميم تراكيب اوراق الجرافين النقية والمشوبة. في البداية، تمت عملية استرخاء هذه التراكيب عن طريق استخدام طريقة PM6 شبه التجريبية مع الدالة الهجينة B3LYP - DFT عند حزمة من برامج Gaussian 09 وبعدها تمت عمليه استرخاء التراكيب باستعمال برنامج SIESTA trunk - 462 من خلال تطبيق نظرية دالية الكثافة LDA / SZ. يلاحظ من نتائج الخصائص التركيبية لاوراق الكرافين المدروسة ان هناك استرخاء جيد لهذه التراكيب، تبقى قيم الاواصر في اوراق الكرافين النقية C - C، C⚍C وC - H في نفس المديات لتراكيب حلقات الكربون. كذلك، ان اضافة مركباتB / P في ورقة الجرافين النقية لبناء اوراق الجرافين المتغايرة لم يؤثر على الخصائص التركيبة للتركيب الاصلي . وان الالتواء الملاحظ في حلقات الفينيل في مناطق الاتصال مع الحلقات المطعمة ياتي من زوايا الالتواء بين ذرات مختلفة بسبب اختلاف الكتلة الذرية والكهروسالبية لذرات B، P وC. تم استخدام نظرية دالية الكثافة LDA / SZ في برنامجGollum لحسابات الخصائص الالكترونية لمجموعتي اوراق الجرافين. ان نتيجة الطاقة الكلية لاوراق الجرافين المدروسة هو انعكاس لطاقة الربط لكل تركيب وتشير الى ان هذه التراكيب تمتلك استرخاء جيد ، وتاثير اضافة ذراتB وذرات P في ورقة الجرافين النقية GR1 كان له دور فعال على الطاقة الكلية للجزيئة. نبين ان كل اوراق الجرافين لها موصلية عالية وفجوة طاقة ممنوعة صغيرة، لكنها تتذبذب تبعا لطول وشكل كل ورقة وعدد وموضع ذرات B وP في الورقة. واظهرت القيم المحسوبة لطاقة فيرمي EF بان قيم EF لاوراق الجرافين النقية تتزايد مع تناقص طول الورقة. وباضافة ذرات B وP باشكال وهيئات مختلفة في GR1 سوف يغير من موقع مستوى فيرمي، ان كافة الاوراق المطعمة لها EF اكبر تقريبا من GR1. وياتي ذلك من اضافة مركبات B / P في GR1 الذي اعطى للورقة خصائص الكترونية جديدة.ان طاقة التاين IE والالفة الالكترونية EA لاوراق الجرافين النقية تنخفض قليلا مع تناقص طول الورقة. وكافة اوراق الجرافين المطعمة لها قيم منخفضة من IE وEA بالمقارنة مع GR1 النقي. ايضا، تظهر نتائجنا ان جميع اوراق الجرافين النقية والمطعمة تمتلك صلادة كهروكيميائية H عالية ومرونة الكترونية S عالية . المرونة الالكترونية العالية ستفتح افاق مستقبليه كاشارة لفجوة حزمة للتركيب مما يجعله يكون مرنا نوعا ما ، ان الكهروسالبية X قد انخفضت مع تناقص طول اوراق الجرافين النقية ، وX لاوراق الجرافين المطعمة هو اقل منها لورقةGR1 ، وهذا يعني ان الالكترونات في هذه الاوراق المطعمة لديها ميل كبير للهروب.واظهرت النتائج ان التوصيليات الكهربائية والحرارية لاوراق الجرافين النقية تكون في الترتيب GR1 ˃ GR3 ˃ GR2 ، التوصيلة الكهربائية والتوصيلة الحرارية لاكبر ورقة تكون هي القيم العليا، وهذا يرجع الى ان GR1 لديه قنوات متعددة لنقل الالكترون، من ناحية اخرى، القيم العليا لفجوة الطاقة خفضت التوصيلة الكهربائية والتوصيلة الحرارية. في حين، ان التوصيلة الكهربائية، وبالتالي ,التوصيلة الحرارية لاوراق الجرافين المطعمة كانت في الترتيب GR6 ˃ GR5 ˃ GR4، وبزيادة عدد ذرات B وP في الورقة انخفضت التوصيليات الكهربائية والحرارية. في جميع الحالات ، ان GR1 النقي لديه قيم توصيلية كهربائية وحرارية اعلى من تلك التي للاوراق المطعمة .ان النتيجة القيمة للغاية تم الحصول عليها من خصائص I - V للتراكيب المدروسة حيث ان سلوك التحسس قلل تماما من تاثيرات درجة الحرارة العالية التي تظهر في الاجهزة الكبيرة القديمة. وتشير حسابات I - V ان التفاعل المناسب مع الاقطاب يكون تاثيره محدودا الى حد ما على سلوك التحسس لاوراق الجرافين النقية والمطعمة. ان نتائج التحسس نتجت من تقليل فجوة الطاقة بين HOMO للورقة ومستوى فيرمي لقطب الذهب في الحيز الامامي والعكسي . ومن نتائج معامل Seebeck، يظهر لنا مساهمة متماثلة لتراكيز الالكترونات والفجوات حول منطقة الطاقة، وقد تبين ان الورقة الاكبر GR1 تملك القيمة الاقصى لمعامل Seebeck . وقد لوحظ ان معاملات الانتقال لاوراق الجرافين النقية تحدث على طول مدى واسع من طاقة الالكترون لانها لا تحوي منطقة استطارة. ايضا، ان الورقة مع عدد قليل من ذرات B وP كالحلقة النقطية في منتصف الورقة GR6 لها قيمة عالية من معامل الانتقال ، وهذا بسبب العدد الكبير من القنوات المفتوحة. وبشكل عام، معامل الانتقال للاوراق المدروسة لديها مدى واسع على نطاق الطاقة | This thesis is a theoretical study of structural and electronic properties of two groups of graphene sheets. The first group included three pure graphene sheets of different lengths GR1 ˃ GR2 ˃ GR3, and the second group represents the three sheets of heterojunction graphene - B/P compounds which were constructed on the basis of GR1.The calculations are carried out using the Local Density Approximation/Single Zeta LDA/SZ density functional theory. Gauss View 5.0.8 program was used to design the structures of pure and doped graphene sheets.Initially, these structures are relaxed by employing the PM6 semi - empirical method with the hybrid functional B3LYP - DFT at Gaussian 09 program package , and then they are relaxed at SIESTA - trunk - 462 of program by employing the LDA/SZ density functional theory. The results of the structural properties of the studied graphene sheets showed that there is good relaxation of the structures, the values of C - C, C⚍C and C - H bonds in pure graphene sheets remain in the same ranges of the carbon rings structures. So, the addition of B/P compound in pure graphene sheet to construct the heterojunction graphene sheets has no effect on the structural properties of the original structure. The screw observed in phenyl rings at the contact regions with the doped rings comes from the twist angles between different atoms due to the difference of the atomic mass and electronegativity of B, P and C atoms. The LDA/SZ density functional theory at the Gollum program was used for the calculations of the electronic properties of the two groups of graphene sheets. The result of the total energy of the studied graphene sheets is a reflection of the binding energy of each structure and indicates that these structures have good relaxation, and the effect of adding B and P atoms in pure graphene sheet GR1on the total energy of the molecule is effective. We showed all graphene sheets have high conductivity and small forbidden energy gap, but it vibrates depending on the length and shape of each sheet and the number and position of B and P atoms in the sheet. The calculated values of Fermi energy EF showed that the EF values of pure graphene sheets increase with decreasing the length of the sheet. Adding the B and P atoms in various shapes and forms in GR1 changes the position of Fermi level, all the doped sheets have EF approximately greater than that for GR1. This comes from the addition of B/P compound in GR1which gave the sheet new electronic properties. The ionization energy IE and electron affinity EA of the pure graphene sheets slightly decrease with decreasing the length of the sheet. And all doped graphene sheets have low values of IE and EA in comparison with the pure GR1. Also, we showed that all the pure and doped graphene sheets have low electrochemical hardness H and high electronic softness S. High electronic softness will pave the way for future prospects as a sign for that band gap of the structure wich becomes rather soft, the electronegativity X was decreased with decreasing the length of the pure graphene sheets, and the X of the doped graphene sheets is less than that for GR1, that means the electrons in these doped sheets have a large escaping tendency. The results showed that the electrical and thermal conductivities of the pure graphene sheets are in the order of GR1 ˃ GR3 ˃ GR2, the electrical conductivity and the thermal conductivity of the largest sheet are the higher values, this is due to the fact that GR1 has multi channels of electron transfer,and on the other hand, the higher the value of the energy gap,it decreased the electrical conductivity and the thermal conductivity. While, the electrical conductivity and therefore, the thermal conductivity of the doped graphene sheets are in the order of GR6 ˃ GR5 ˃ GR4,and by increasing the number of B and P atoms in the sheet, the electrical and thermal conductivities decreased. In all cases, the pure GR1 has values of electrical conductivity and thermal conductivity higher than those for the doped sheets. A very valuable result was obtained from I - V characteristics of the studied structures, in which the sensing behavior completely reduces the high temperature effects that appear in the old macro devices. The I - V calculations suggest that the suitable interaction with the electrodes have a rather limited influence on the sensing behavior of the pure and doped graphene sheets . The sensing results from the lowering of the energy gap between the HOMO of the sheet and the Fermi level of the gold electrode in the forward and reverse bias. From the results of the seebeck coefficient, we showed symmetrical contribution of electrons and holes concentrations around the region of the energy, it is found that the largest GR1 has the maximum value of seebeck coefficient. The transmission coefficients observed for the pure graphene sheets take place along a wide range of electron energy because they have not got a scattering region. Also, the sheet with small number of B and P atoms as a dot doped ring in the middle of the sheet GR6 has high value of transmission coefficient, this is due to high number of open channels. In general, the transmission coefficient of the studied sheets has a wide range on energy scale

تحضير ودراسة سلوكيات الرص لمتراكبات (الومينا - المنيوم) Preparation & Studying the Compaction Behaviors of the (Alumina - Aluminum) Composite

اسم المؤلف: حنان جميل مصطفى
اسم المشرف: عبد الحميد رحيم مهدي الصراف
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم تحضير المتراكب السيرميتي (سيراميك - معدن) من مادة الالومينا (Al2O3 - γ( كمادة اساس، ومن معدن الالمنيوم (Al) كمادة تدعيم، لتراكيز مختلفة من الالمنيوم (0 - 50)%، ونسبة زيادة التدعيم 10)%).تمت عملية التشكيل باستعمال الضغط باتجاه واحد، وانجزت عملية التلبيد في جو مفرغ من الهواء. درست سلوكيات الرص بحالة التلبيد الصلبة عند درجات حرارة التلبيد (400، 450، 550) م° ، وازمان التلبيد (2، 4، 6) ساعات، وعند ضغوط تشكيل (50، 100، 150) بار، تم الحصول على افضل الخواص الفيزيائية عند (550م°، 2ساعات، 150ساعة). تمت دراسة حالة تلبيد الطور السائل كدالة لتغير نسبة الالمنيوم في المتراكب عند (800م°، 2ساعة، 150بار)، بناء على ما تم التوصل اليه من خواص فيزيائية جيدة عند حالة التلبيد بالطور السائل، اختيرت هذه المواصفات لدراسة تاثير تغير الضغط عند (50، 100، 150) بار على الخواص الفيزيائية للمتراكبات السيرميتية المحضرة. اظهرت السلوكية عند المنطقة التي تحتوي تركيز الالمنيوم (40 - 50)% افضل الخصائص الفيزيائية، تبعا لذلك، درست اغلب القياسات على التركيز صاحب نسبة 50% من مادة الالمنيوم. المفهوم الاساسي الذي تضمنته هذه الدراسة هو التلاصق الفيزيائي بين مكونات المتراكب السيرميتي المحضر، والذي كان واضح من فحص انحراف الاشعة السينية. كذلك من الفحص المجهري (SEM) نلاحظ ان المتراكب النهائي (السيرميتي) المحضر اشبه الى ما يكون جزر موصلة (مادة الالمنيوم) مفصولة بمناطق عازلة (مادة الالومينا) وهذا ناتج بفعل التلاصق الفيزيائي. لوحظ ان زيادة نسبة الالمنيوم للمتراكبات المحضرة يلعب دورا مهما في الخواص الفيزيائية والكهربائية والتي تم مناقشتها بالتفصيل، وكذلك حسن من قيمة الصلادة للمتراكبات المحضرة، حيث ان التوزيع العشوائي لدقائق الالمنيوم ضمن مادة الالومينا، كون اقرب الى ما يكون الى شبكة داخلية معدنية زادت من متانة المتراكب المحضر من خلال ملء المسامات الموجودة غالبا بسبب مادة الالومينا الهشة. من خلال هذه الدراسة توصلنا الى ان المتراكب المحضر له نسبة مسامية عالية والتي يمكن توظيفها في صناعة فلترات الوقود. كما يمكن توظيف الخواص العزلية المحسنة التي توصلنا اليها في صناعة المتسعات السيرميتية (cermet capacitors )، كذلك من خواص مقاومة البلى التي توصلنا اليها، ممكن توظيفها في تصنيع ادوات القطع والبرد بعد اجراء التحسينات اللازمة. | A cermet (ceramic - metal) composite have been prepared from alumina ceramic (γ - Al2O3) as a matrix and from aluminum metal (Al) as reinforcement, prepared for different concentrations of aluminum (0 - 50)%, the reinforcing increment is (10%).The forming process was done by single action pressing, and the sintering process was done in vacuum atmosphere.The compaction behaviors of prepared cermet bodies were studied in solid state sintering, at sintering temperatures (400, 450, 550) °C, sintering times (2, 4, 6) hrs. and forming pressures (50, 100, 150) bar, the best physical properties were gained at (550 °C, 2hrs., 150bar).Liquid phase sintering process was studied as a function of Al percent in the composite at (800 °C, 2 hrs., 150 bar). According to the interesting physical properties we gained from liquid phase sintering process, these parameters were chosen to study the effect of the forming pressure ((50, 100, 150) bar) on the physical properties of the prepared cermet bodies. The behavior at the region that have aluminum concentration (40 - 50)% showed the best physical properties, according to this, most of the measurements were studied on the concentration of 50% of aluminum material. The basic concept of this study is the physical adhesion between the material particles of the prepared cermet bodies, which was obvious from the XRD tests. Also from the SEM micrograph we have notice the final structure of the prepared cermet, which is more like conducting islands (aluminum) separated by isolated areas (alumina), which is a sequent of the physical adhesion action.Increasing of aluminum content in the composite materials prepared may play an important role in physical and electrical properties has been discussed in detail, also enhanced the hardness of the samples, where the random distribution of aluminum particles through the alumina material, makes more like internal web of metal, that helps to increase toughness of samples by filling the porosities existed because of the brittle alumina.From this study we noticed, we have relative high porosity that could be employed in fuel filters. Also we have fine dielectric properties that could inter the application of cermet capacitors. Also, we have reasonable wear result that can be employed in grinding and cutting tools after improvements have been done.

الخصائص الكهربائية والبصرية لمتراكبات بوليمر - نحاس Electrical and Optical Properties of Polymers - Cu Composites

اسم المؤلف: حسنين عبد الحسين جاسم الغالبي
اسم المشرف: اسرار عبد المنعم سعيد
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الدراسة، تم تحضير نوعين من المتراكبات (Cu - PMMA)و(Cu - Epoxy) باستخدام طريقة الصب مع نسب وزنية مختلفة من جسيمات النحاس(Cu). وقد تم تشخيص النماذج للمتراكبات بطرق مختلفة مثل صور المجهر الضوئي وصور المجهر الالكتروني الماسح (SEM) والتحليل الطيفي للاشعة تحت الحمراء (FTIR) وحيود الاشعة السينية(XRD). وتمت دراسة الخصائص الكهربائية المستمرة والمتناوبة (C.D وC.A) للمتراكبات والخصائص البصرية ضمن اطوال موجية تتراوح بين (200 - 1100) نانومتر. صور المجهر الضوئي توضح توزيع جسيمات النحاس لنماذج المتراكبات (Cu - PMMA) وتبين تكون شبكه مستمرة داخل البوليمر عند النسبة الوزنية ( %.wt 60) من النحاس, بينما نماذج المتراكبات (Cu - Epoxy) لم نستطع الحصول على اي صورة لها لان هذه النماذج سميكة ومعتمة. وقد تم دراسة مورفولوجية السطح للنماذج باستخدام تقنية المجهر الالكتروني الماسح (SEM), والذي اظهر توزيع المضاف على السطح وزيادة خشونة السطح مع زيادة نسبة النحاس. وقد تم فحص طيف (FTIR) للنماذج واظهر انواع الاواصر لكل من البولمر والمتراكبات, واظهرت هذه الدراسة ان اضافة (النحاس) لم تؤثر على التركيب الكيميائي للبولمر. واظهرت النتائج التجريبية (XRD) تحويل النماذج من شبة بلورية الى بلورية بسبب زيادة نسبة جسيمات (النحاس). وقد اظهرت النتائج الكهربائية المستمرة (D.C) ان التوصيلية الكهربائية المستمرة (σD.C) للنماذج ذات النسب الوزنية الواطئة تزداد بزيادة درجة الحرارة, اي المقاومة الكهربائية لهذه النماذج تكون ذات معامل حراري سالب, وعند النسبة الوزنية ((%.wt 60) للمتراكبات (Cu - PMMA) و(%.wt 25,30, 40) للمتراكبات (Cu - Epoxy) تقل توصيليتها الكهربائية المستمرة (σD.C) بزيادة درجة الحرارة, اي المقاومة الكهربائية لهذه النماذج تكون ذات معامل حراري موجب. وان طاقة التنشيط تقل مع زيادة النسبة الوزنية للنحاس. اما في ما يتعلق بالخواص الكهربائية المتناوبة (C.A) فان ثابت العزل(ԑˈ) والفقدان العزلي (ԑ") للنماذج تتناقص مع زيادة تردد المجال الكهربائي المسلط وانها تزداد مع زيادة تركيز جسيمات (النحاس), وتزداد التوصيلية الكهربائية المتناوبة (σ_(A.C)) مع زيادة تركيز جسيمات (النحاس) والتردد، وثابتة تقريبا في الترددات العالية. اظهرت نتائج الخصائص البصرية للمتراكبات (Cu - PMMA) ان الامتصاصية ومعامل الامتصاص ومعامل الخمود ازدادت وان فجوة الطاقة للانتقال غير المباشر المسموح تناقصت مع زيادة النسبة الوزنية للنحاس. بينما الثوابت البصرية الاخرى لم نستطيع الحصول على نتائج لهذه المعاملات لان الامتصاصية عالية جدا. اما المتراكبات (Cu - Epoxy) لم نستطيع الحصول على اي خصائص بصرية لها لان هذه النماذج سميكة ومعتمة | In this study, two types of composites have been prepared : (PMMA - Cu) and (Epoxy - Cu) by using casting methods with different weight percentages of copper particles (Cu). The composites samples have been diagnosed by different methods such as optical microscope images, scanning electron microscope images (SEM), Fourier transformation infrared (FTIR) spectroscopy and X - ray diffraction (XRD). The electrical properties (D.C and A.C) of composites and optical properties of wavelengths range (200 - 1100) nm were studied. The images of optical microscope shows distribution of copper particles for (PMMA - Cu) composites samples and shows a continuous network inside the polymer at the ratio (60wt.%) of )Cu), while the (Epoxy - Cu) composites samples we cannot get any images because these samples are thick and dark. The morphology of samples have been studied using (SEM) technique, which showed grain distribution at surface morphology and grain aggregates with increasing of copper particles. The FTIR spectrum of samples were measured and shown the type of bond for polymer and composites. This study showed that the addition of (Cu) did not affect on the chemical structure of polymer. The experimental results (XRD) showed the samples transmutation from semicrystalline to crystalline because increased ratio particles of (Cu). The results show that the (D.C) electrical conductivity increases with increasing the temperature at low concentrations, where electrical resistance for these samples have a negative thermal coefficient, at (60 wt.%) of (PMMA - Cu) and (25,30,40 wt.%) of (Epoxy - Cu) composites (D.C) electrical conductivity decreases with increasing temperature, where electrical resistance for these samples have positive thermal coefficient. The activation energy decreases with increasing weight percentage of (Cu). The (A.C) electrical properties shows that the dielectric constant (ԑˈ) and dielectric loss (ԑ") of the samples decreased with increasing the frequency of applied electrical field and they increase with the increase of the concentration of (Cu). The A.C electrical conductivity (σ_(A.C)) increases with increasing the concentration of (Cu), increases with the increase frequency, and almost constant at high frequency. The results of optical measurements of the (PMMA - Cu) composites show that the absorbance, absorption coefficient and extinction coefficient increase and the energy gap of the indirect allowed transition decreases with the increasing weight percentage of (Cu), while the other optical constants we cannot get the results for these parameters because the absorbance is very high. The (Epoxy - Cu) composites we cannot get any optical properties because of these samples are thick and dark.

تحضير تراكيب نانوية للزنك اوكسيد بطريقه السول - جيل

اسم المؤلف: تغريد سعدون محسن
اسم المشرف: رعد سعدون صبري محمد جاسم محمد حسن
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا البحث دراسة الخصائص التركيبية ,البصرية ,الكهربائية والتحسسية للاغشية (ZnO) النقية والمشوبة بالسيريوم (Ce) بالنسب % (3,5,10) المحضرة بطريقة السول - جيل, والتي رسبت بطريقه السبن كوتنك على قواعد زجاجية وملدنه عند درجات الحراره (350,500,550˚C) للاغشيه النقيه و(˚C550 ) للاغشيه المشوبه وبسمك (315.5)nm.بينت فحوصات نمط الحيود للاشعة السينية (XRD) لتشخيص طبيعة تبلور الاغشية المحضرة, حيث اظهرت النتائج ان جميع الاغشية المحضرة ذات تركيب متعدد التبلور من نوع سداسي hexagonal)), كما تبين من نتائج التشويب ان زيادة التشويب تؤدي الى النقصان في الحجم الحبيبي حيث تناقص الحجم الحبيبي من (37.1) الى (27.0) في حالة التشويب بنسبة ,10%, ومن خلال قياسات ماسح القوة الذرية AFM تبين ان خشونه السطح تزداد بزياده نسب التشويب من القيمه (1.14) الى القيمه 2.15)) عند النسبه 10 % ,ومن قياسات المجهرالالكتروني الماسح SEM تم التعرف على نوع التراكيب ففي الاغشيه النقيه ظهرت التراكيب ذات جسيمات نانويه كرويه الشكل موزعه بصوره منتظمة ومتجانسة ,بينما الاغشيه المشوبه كانت التراكيب الناتجه شبيه بالالياف وعلى شكل شبكه تجاعيد (متغصن ). وقد تم دراسة الخواص البصرية لاغشية اوكسيد الزنك النقية (ZnO) والمشوبة بالسيريوم (ZnO : Ce) على دراسة طيف النفاذيه (T᷊) لاغشية المحضرة حيث بينت النتائج ان اعلى نفاذيه تم الحصول عليها هي(95%) عند الاغشية النقيه بينما كانت النفاذيه للاغشية المشوبة %(65 - 40) ولمدى اطوال موجيه350 - 900) nm.) , وتبين ايضا ان الامتصاصية بشكل عام تزداد بزيادة نسب التشويب لتصل اعلى قيمة عند النسبه10% بزيادة نسبة التشويب. تم حساب فجوات الطاقة البصرية للاغشية النقيه والمشوبه وتبين ان فجوة الطاقة تزداد قليل بزيادة نسبة التشويب الى ان تصل الى اعلى قيمة عند نسبة التشويب (10%). وكانت فجوة الطاقة ( (Eg تتراوح من (3.219 eV) الى (3.232eV) بزيادة نسب التشويب. اظهرت القياسات الكهربائية ان التوصيلية الكهربائية المستمرة تزداد بزيادة نسبة التشويب ثم تقل عند النسبه 10 % مع زيادة نسبة التشويب . وبينت القياسات ان الاغشية كافة تمتلك طاقتين للتنشيط (Ea1) و(Ea2) تقل قيمتهما بزيادة نسبة التشويب. كما بينت خصائص(photoconductivity) ان الاغشيه تمتلك ربحيه مقدارها (2.357) للاغشيه النقيه و(1,1.666,1)للاغشيه المشوبه عند النسب (3,5,10 )%على التوالي . اما خصائص التحسسية لجميع الاغشية المحضره كانت تقاس بعد تعريضها الى ( (100,150,200 ppm) من ال( NH₃و( NO₂ عند درجه حراره الغرفه . النتائج العملية بينت ان اغشية اوكسيد الزنك المشوبة بالسيريوم والمرسبة على قواعد زجاجية تحسن التحسسية لتلك الاغشية للغاز ( NH₃و ( NO₂ كما تبين ان افضل نتيجة سجلت كانت للاغشية المشوبة بنسبة 10 % حيث كانت (17%) للغاز NO₂ و(16.66%)للغاز NH₃عند 300 درجه مئويه في حين كانت افضل نتيجه للاغشيه المشوبه بنسبه (%3 و%5) حيث كانت (12.6 %) للغازNO₂ و(10.31%) للغاز ,NH₃ 14%)) للغاز NO₂ و(13.28 %) للغاز NH₃ على التوالي عند 200 درجه مئويه . بالاضافة الى ذلك تبين ان التحسسية لها علاقة نسبية لدرجات الحرارة وكمية الغاز. | In the present work, structural, optical, electrical and sensing properties have been studied for undoped and Ce doped zinc oxide (ZnO) thin films with different cerium doping concentrations (3 ,5 and 10) % prepared by a Sol - gel method with spin coating , deposited on glass substrate at annealing temperature (350,500 and 550 )˚C for the pure thin film , 550 ˚C for doped thin film with (350±10) nm thickness, The X - ray diffraction technique has showed that all prepared films are polycrystalline structure type of hexagonal wurtzite, The doping resulted in decreasing grain size deteriorates the crystalline of the films from (37.1nm) of pure ZnO to (27nm) of ZnO : Ce at (10 %) doped. Surface analysis by AFM have been, the roughness increased with increasing the cerium concentration in the films from (1.14) to (2.15) at 10 % , From FE - SEM have been identified the structures in the thin film pure, spherical nanoparticles distributed a regular basis and homogeneous, while doped thin film were shapes like fiber and a wrinkle network. The measurements of optical properties transmittance of undoped and Ce doped ZnO films showed higher transmittance was (95%) for undoped ZnO films while (65 - 40% ) for doped Ce films within wavelength range (350 - 900nm). In addition, the results have showed the absorbance increased with increased doping to reach maximum value at 10% concentration. The energy gap of ZnO was calculated for undoped and doped films .It is noticed that the energy gap increases slowly with the increased of doping until it reaches the highest value at 10% doping concentration , and the energy gap ranging from (3.219) to (3.232) with increased doping concentration.The results of electrical properties have showed that direct current (D.C) conductivity increases then decreases by increasing doping to reach maximum value at 10% doping concentration. The results have showed that the films have two activation energy Ea₁ and Ea₂. From (photoconductivity) characteristics it has found that the gain factor (2.357) for pure ZnO and (1, 1.666, 1) for ZnO : Ce at (3, 5 and 10) % Respectively.The sensing properties for all undoped and Ce doped films were measured after films surface was exposed to (100,150 and 200) ppm for NH₃, NO₂ gas at room temperature. The experimental results of Ce doping of zinc oxide thin films with different cerium doping concentrations (3,5 and 10) % which deposited on glass substrate ,sensitivity of thin film sensor elements was investigated in this work. Therefore that the sensitivity of all the samples increases with the increasing in the operating temperature, reaching a maximum value corresponding to an optimum operating temperature which is 300°C for sample (10 %) and 200 °C for samples (3 % ,5 %). In addition ,the sensitivity is directly proportional with the operation temperature for limited range. In general , the sensitivity increases by increasing the concentration of NH₃, NO₂ with increasing temperature degree.

دراسة نظرية لمستويات طاقة النظائر ( - 2^6)[He] - 4 , ( - 9^18) F - 9 , ( - 15^30) P - 15 بالاعتماد على usda ,usdb ,usd باستخدام حسابات انموذج القشرة النووي Theoretical study of energy levels for (_2^6)?He?_4 , (_9^18)F_9 and (_15^30)P_15 Isotopes depending on USDA,USDB and USD using shell model calculation

اسم المؤلف: ايوب طالب عبد داغر
اسم المشرف: احمد موسى اشويخ
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: باستعمال حسابات انموذج القشرة النووي لتقيم مستويات الطاقة . مصفوفة العناصر النووية للتفاعل المؤثر لنيوكليونين اشتقت لجهود USD,USDB,USDA لوصف التفاعل للنيوكليونات وفقا لفضاء انموذج التشكيل للنوى ولحساب طاقات الربط والتهيج النووي . ووفقا لنظرية الاضطراب حسبت طاقة المستويات على افتراض وجود نيوكليونين بروتون ونيوترون خارج القلب المغلق وصفت وفقا لجهود USD,USDB,USDA العالمية . الحسابات اتمت باستعمال طاقة الجسيمة المفردة لتفاعل النيوكليونات خارج القلب المغلق ولثلاث انظمة , طاقة المستويات حسبت اعتمادا على مبدا الاختيار للزخم الزاوي والبرم النظائري T=0,T=1 لدوال الموجة غير المتناظرة للنيوكليونات . نتائج الحسابات اتمت باستعمال حزمة الماتلاب لحساب مستويات الطاقة مع قيمة عملية ونظرية لطاقة الجسيمة المفردة ونتائج الحسابات قورنت مع القيم العملية لمستويات الطاقة ولوحظ توافق جيد مع القيم العملية | The nuclear structure for low lying energy states of isotopes (_2^6)He_4 , (_9^18)F_9 , and (_15^30)P_15 nuclei have been investigated and studied using shell model depending on the evaluation of the energy levels . Nuclear matrix elements for the effective interaction of two - nucleons have been derived for the USD,USDA and USDB potential to describe the interaction of the nucleons at configuration model space for nuclei to evaluate the binding and excitation energy. According to the perturbation theory , evaluation energy levels with assume two nucleons one proton and one neutron out the closed inert core. The interaction of the nucleons out the closed core describe by USD,USDA and USDB universal potential .the calculations have been performed using single particales energy for nucleons interactions out the closed core in three system.The energy levels are computed depending on the selection rule of angular momentum and the isospin T=1and T=0 for antisymmetric wave functions for nucleons. Their results has been employed using Matlab software to evaluate the energy levels with experimental and theoretical single particle energies. The results data are compared with experimental energy levels which show good agreement

تصنيف وتحليل الصور الماخوذة للكلى باستخدام خواص النسيج Classification and Analysis of Kidney Images Using Texture Properties

اسم المؤلف: ايناس حمادي حسن
اسم المشرف: علياء حسين علي
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: معالجة الصور
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يهدف البحث الى الكشف المبكر وتشخيص الاورام وحصى الكلى من الصور المقطعية CT من خلال استخدام تقنيات برمجيات الحاسوب معالجة الصور الرقمية النظام المستخدم هو برنامج Matlab R2011a. تم استخدام 22 نموذج لخمس حالات من صور الكلى تتضمن الحالات السليمة, الحصى, الاورام (السرطانية), التكيس, والتليف الكلوي. واظهرت النتائج المستحصلة من النماذج القدرة على الكشف بين مختلف الاورام التي تصيب الكلى للحالات المبينة اعلاه. عمليات التقطيع التي استخدمت منها خوارزمية Thresholding التي تم تطبيقها على الصور المقطعية CT للكشف عن الانسجة غير السليمة (الورم والحصى) وفرزها وتميزها عن الاجزاء السليمة. طريقة اخرى استخدمت للتقطيع هي عملية التجزئة بطريقة Watershed segmentation لفصل الورم والحصوة من الكلى. كذلك تم حساب الخصائص النسيجية من مصفوفةLaw's) (Co - occurance, Local Binary, mask الى جانب الخصائص الهندسية لغرض الحصول على افضل نتائج. ان عمليات التصنيف بطريقة Unsupervised هيK - mean clustering استخدم هذا التطبيق على صور ال CT للكشف وتصنيف نوع الورم في الكلى, k - mean والتي تعتبر طريقة لفصل كل صنف على حدة اعتمادا على خصائص النسيج والمسافة بين كل صنف , واللون ان هذه الطريقة المستخدمة هي افضل من Watershed segmentation لانها فصلت وعزلت الاجزاء السليمة في اصناف وكذلك منطقة الورم باصناف لكل واحدة على حدة بصورة واضحة. ان حساب الخصائص الاحصائية للورم والحصوة التي يتم فصلها بواسطة mean clustering K - وحساب الخصائص الهندسية, لتحديد مساحة ومحيط الورم, مهمة جدا لتحديد نوع الورم وكذلك حساب اللاانتظامية التي تعطي مؤشرا حول شكل الورم او الحصوة. ان هذه الطرق تساعد الاطباء للكشف وتمييز الورم عن الحصى ومن ثم تسهيل العلاج من خلال مساعدة الطبيب والاشعاعي للتعرف على الاجزاء المتضررة من الكلى وحماية الاجزاء السليمة قدر الامكان من التعرض للاشعاع. اظهرت النتائج ان افضل الطرق المستخدمة للتجزئة وتحليل النسيج هي K - mean مع مصفوفة Co - occurrence لان K - mean يفصل الاجزاء السليمة ومناطق الضغط حول الورم والحصوة عن النسيج السليم. | The thesis aims to early detection and diagnose kidney tumors and kidney stone from Computed Tomography Scanning CT scan images through the use of computer and software technologies digital image processing, the system implemented in MATLAB R2011a. 22 samples has been used to five cases of kidney images including healthy, stones, tumors (cancer), cystic, and renal fibrosis. The results obtained shows that, the system are able to detecting between different tumors of the kidney the cases mentioned above. The segmentation processes that have been used which is the thresholding algorithm which has been applied on CT images are used to detect unhealthy tissues (tumor and stone). It's important for detoctors to determine the area of the tumor and stone to avoid damaging the healthy tissue during the treatment. Another way to segmentation process is the watershed which has been implemented to segmented the tumor and stone from the kidney. Also the textural process which are the Law's mask, Local Binary and Co - occurance matrix features are calculated beside the geometrical features to produce the best result of feature extraction and tumor predication. The unsupervised classification process which is the K - Mean clustering is used. The application of K - mean on CT images is to detect and classifying the type of tumor in the kidney, The K - mean clustering is a method of separating each class depending on the texture properties and the distance from each class and color, this method is best than watershed, it separated the healthy classes and the tumor classes from each other clearly. The statistical features are calculated for tumor and stone which are seperated by the k - mean cluster analysis process, the geometrical features, which represented the area and permiter is calculated for tumor. it's very important to estimate the irregularity which gives indication about the tumor and stone shape. These methods will enable the doctors to detect the tumor and the stone, then easing tretment, as well, it helps the radiologests to identify the affected parts of the kidney in order to prodect the normal parts as much as possible from exposure to radiation. The result shows, different methods are used for segmentation and texture analysis. But the best one is the k - mean's with co - occurrence matrix since, the k - mean's seperated the healthy classes and the tumor classes. So, it regarded as to be the best way to classify the tumor.

دراسة نظرية للحاصل الفوتوني لتفاعل كوارك - كوارك Theoretical Study of Photon Yield at Quark - Quark Interaction

اسم المؤلف: ايناس جاسم محسن ولي
اسم المشرف: هادي جبار مجيبل العكيلي
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تمت دراسة حاصل انتقال الفوتونات في تفاعل الكوارك - كوارك نسبة لتبادل الكلون وبدرجات حرارة عالية بالاعتماد على النظرية الكمية اللونية. انصبت هذه الدراسة على حساب معدل الانتقال الفوتوني والناتج بعملية الفناء للنظام الكواركي باستعمال نموذج بسيط لتفاعل الكوارك - كوارك وفقا للنظرية الكمية اللونية ونظرية الاضطراب باستخدام الاعتبارات الكمية. تم تحديد المعدل الكلي لانتقال الفوتونات الناتجة لعملية الفناء وحسابه كدالة لثابت الاقتران وزخم الانتقال وطاقة الفوتون ودرجة الحرارة الحرجة والطاقة الحرارية للنظام. احتمالية معدل انتقال الفوتون حسبت باستعمال قيمتين للطاقة الحرارية الحرجة Tc=144MeV وTc=170MeV مع عدد من قيم الطاقة الحراريةT=125MeV وT=188MeV وT=250MeV وT=310MeV نسبة الى زخم الانتقال. ان التقريب من الدرجة الاولى للنظرية الكمية اللونية ولفناء الكوارك - الكوارك المضاد تشير الى التباعد الاسي لمعدل الفوتونات العائدة لتفاعل كوارك - كوارك. وفقا لنظرية الاضطراب في درجات الحرارة العالية يتبين لنا تاثير الطاقة لتبادل الكلون على ظاهرتي كل من الحبس اللوني والتقارب الحر والتي توفر معدلات محددة. في هذه الاطروحة تظهر النتائج اثنين من السلوكيات المتميزة لتفاعل الكواركات وهي صفة الحبس والتقارب الحر اعتمادا على ثابت الاقتران. معدل الانتقال الفوتوني يزداد بتناقص ثابت الاقتران وبتناقص طاقة الفوتونات مع زيادة الطاقة الحرارية وانبعاث الفوتونات يكون كبير. من جهة اخرى فان معدل انتقال الفوتون يتناسب مع الطاقة الحرارية الحرجة ويزداد معدل انتقال الفوتون مع زيادة الطاقة الحرارية للنظام ويقل مع زيادة زخم الانتقال . | The transition of photons from a quark - quark interaction due to exchange gluon at high temperatures have been investigated and studied according on quantum chromodynamic theory QCD. This study focuses on the evaluation of the photon transition rate production in an annihilation processes for quarks system using a simple model of quark - quark interaction according on quantum chromodynamic theory and perturbation theory using a quantum consideration. Specifically, the total photons transition rate production at annihilation processes is evaluated as a function of the running strength coupling scaled ,momentum transfer P, photon energy E_γ, critical temperature Tc, and thermal energy T for system. The probability of photon transition rate ζ(α_s,E,T) have been evaluated using two values of critical temperature Tc =144 MeV, and Tc =170 MeV with many values of thermal energy T =125 MeV, T =188 MeV, T=250 and T =310 MeV relative to momentum transfer P=1 to 5 GeV. At first order approximation the quantum chromodynamic theory for quark - antiquark annihilation indicates to exponential divergent of photons yield rates for quark - quark interact. According to the perturbation theory at high temperature we show that effects of energy to the exchanged of gluon on the confinement and asymptotic freedom provide finite rates. In this thesis, results exhibit the two distinct behaviors of quarks state interaction which are described as confinement and deconfinement depending on the running coupling strength α_s (T). The rate transition of photons is increasing at decreasing of running coupling strength α_s (T) and decreases of the photon energy E_γ, with the increase of thermal energy T and emitting photon would be large. On the other hand the photon transition rate proportional to the critical temperature and the photon transition rate increase with the increase of the temperature and decrease with the decrease of momentum transfer