عرض: 25 50 75 100 النتائج

نتائج البحث: 25 من أصل 29

تاثير اضافة مادة البايركس على بعض الخصائص الفيزيائية لمادة البورسيلن Influence of Pyrex Addition on Some Physical Properties of Porcelain Material

اسم المؤلف: عمر عدنان جاسم
اسم المشرف: كريم علي جاسم سوسن عبد الحسين مهدي
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: This study was carried out to prepare a porcelain samples of raw material 50 wt % kaolin dukhla, 25 wt % erzma sand glass and 25 wt% feldspar, boro silicate glass (Pyrex) used as a flux in the porcelain (ceramic) body, instead of feldspar, yielding a new material which has new properties with grain size equal to 53μ.Pyrex which was added to the porcelain to get the mixtures of sample. The all mixtures prepared and 10 wt % of distilled water was added, the resulting blends were die pressed of 25 MPa, to produce specimens with diameter of 25 mm and thickness of 5 mm, then they were dried and sintered for different temperatures (1200, 1250, and 1300) C° for 1 hour in an electric furnace. Physical properties measurements such as density, porosity, water absorption and length shrinkage percentage, were carried out, also mechanical properties (compression strength) and thermal properties. (Thermal conductivity and heat capacity) were measured The result of the physical properties measurement are found to be improved at increasing the ratio of Pyrex mixture, such as increase in density and shrinkage which a company with the decrease of porosity and water absorption, also the same changes were happened for these properties with increasing sintering temperature for all mixtures, and the highest increment in shrinkage have been shown at 1250 C°.The thermal conductivity and heat capacity have increased the ratio of Pyrex mixture, and there are small increment in these measurements, at increasing temperature for mixtures 3 and 4, but the increment is high for mixture no. (2).The results of mechanical properties measurements (diametrical strength) are found to be improved and increased at the increase of the ratio of Pyrex mixture and the mixture no. (3) have a highest strength. Also this improvement and increment in strength was continued for mixtures 2 and 3, with the increase of the sintering temperature whereas decreases for mixture (4) improvement in physical and mechanical properties for a new porcelain make suit usage in brick walls industry (porcelain tiles).

السليكون العشوائي للثنائي الباعث للضوء من النقاط الكميه Amorphous silicon Light Emitting Diode Quantum Dots

اسم المؤلف: ولاء خليل جميل خليل
اسم المشرف: موفق كاظم عبد الرضا
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الدراسة استخدمت الحسابات النظرية لنبيطة ثنائي الباعث للضوء للنقاط الكميه من السيليكون العشوائي. وعن طريق هذه الحسابات فقد تبنينا فكرة التقيد الكمي. وقد وجد ان الانبعاث الكمي الضوئي يظهر اعتمادا مهما لحجم النقاط الكمية والتي تتراوح من (١ - ٤) نانومتر. ان الكفاءة الكمية الداخلية تتاثر بدرجة الحرارة حيث تكون اكثر كفاءة عند درجة حرارة الغرفة. يمكن لفجوة الطاقة ان تتناغم وفقا للتحكم بحجم النقاط الكمية من السليكون العشوائي. وقد اظهرت النتائج الازاحة نحو الطاقا العاليه في تاثير حالة التقييد الكمي, لهيكل النقاط الكمية للسيليكون العشوائي. وهذا التقييد الكمي يجعل السليكون مرشح للعرض بكامل الوان الطيف البصري. مما يقودنا هذا السلوك البصري الى تفسير تغير مادة النقاط الكمية للسيليكون العشوائي لتصبح مادة ذات فجوة حزمية مباشرة بعد ان كانت غير مباشرة في طبيعتها الحجمية. تمت دراسة الكفاءة الكمية الداخلية بوصفها دالة الى الطول الموجي وتيار الحقن. لقد وجدنا ان النتائج المستحصلة متفقه اتفاقا جيدا مع النتائج التجريبية المنشورة. لذا, فاننا نؤكد على ان مادة النقاط الكمية من السليكون العشوائي هي خيار واعد لنبائط انبعاث الضوء المرئي والقابلة للتناغم الطاقي وذات انجازية عاليه | In this work, theoretical calculations were used by considering the amorphous silicon quantum dots light emitting diode (a - SiQDs LED) as the device of investigation. By these calculations, the effect of quantum confinement was a doped. It is found that the light emission shows significant size dependence in the range (1 - 4) nm of the quantum dots. The internal quantum efficiency is affected by temperature and it is more efficient at room temperature. The energy gap can be tuned by controlling the size of a - SiQDs. The blue shift is attributed to quantum confinement effect in a - SiQDs structure, where quantum confinements make silicon like candidate for full - color display. It led to the interpretation that the a - SiQDs material has been changed to be a direct band gap material. Internal quantum efficiency as a function of wavelength and injection current has been studied. It is found that the obtained results are in good agreement with the experimental published data. Therefore, a - SiQDs material was asserted to be a promising candidate for visible, tunable and high performance light emitting devices.

دراسة نظرية لطيف مستويات الطاقة الواطئة ولنوى خفيفة باستعمال انموذج القشرة النووي 3016S14,3014Si16,188Ne10 Theoretical Study Of Low Lying Spectrum For Light Nuclei By Using Nuclear Shell Model 3016S14,3014Si16,188Ne10

اسم المؤلف: هدى بطرس بهنام مقادسي
اسم المشرف: هادي جبار مجبل العكيلي
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ان طاقات الربط والتهيج حسبت لنوى (_8^18)Ne_10 , (_16^30)S_14 , (_14^30)Si_16 وللمستويات الدنيا باستعمال حسابات انموذج القشرة النووي ولبروتونين في القشرة S,dلنوى (_16^30)S_14 بينما لنيوترونين لنواة (_14^30)Si_(16 ) ,(_8^18)Ne_10 ولمدارات خارج القلب المغلق .عناصر مصفوفة التفاعل تم الحصول عليها من خلال استخدام جهد تفاعل USD,USDA ,USDBنتائج الحسابات النظرية لطاقات الربط والتهيج والمحسوبة باستعمال عناصر المصفوفة النظرية اظهرت تطابقا مع النتائج العملية .حسابات انموذج القشرة استعملت لفهم ودراسة خصائص المستويات الدنيا ولعدد الكتلة لنوى A=18,30 .استعمل القلب المغلق مع التفاعل المتبقي للجسمين ما بين النكليونات الخارجية O8816 ,14 14Si28 .لحالات التماثل الموجبة فان جميع التشكيلات لقشرة S,d اخذت بالحساب باعتبار ان هناك قشرة مغلقة مع جسيمين في مستويات القشرة .S,dتفاعل الجسمين الفعال للنوى اختير على اساس جهد USD,USDA,USDB .اظهرت قيم طاقات الربط والتهيج تطابق جيد مع القيم العملية .واعتبرت الجهود USD,USDA,USDB هي المدخلات الاساسية لحساب الطاقات النووية والتي تتضمن تفاعل نكليون - نكليون .الحسابات اظهرت لنا امكانية اكبر لفضاء تفاعل النكليونات كون طاقات الحالات الارضية متقاربة . | Binding and excitation energies have been calculated at low lying levels for (_8^18)Ne_10 , (_16^30)S_14 and (_14^30)Si_16 nuclei using shell - model calculation with two protons in the S - d shell for (_8^18)Ne_10 , and (_16^30)S_14 while two neutrons for (_14^30)Si_16 in orbits outside the closed core. The effective two - body matrix elements are obtained from the USDA, USDB and (USD) potential interaction. Results of calculated binding and excitation energies are show a good agreement with experimental data with calculated by using theoretical matrix elements . The shell model calculation is used to investigate properties of levels at low lying in the mass number of nuclei A =18 and 30. An inert core with a residual two - particle interaction between the outer nucleons of (_8^16)O_8 , and (_14^28)Si_14 as summed. For the positive parity states all configurations in the s - d shell are taken into account are described by a closed shell, two nucleons in the S - d shell . The effective two - particle interaction is chosen to be a described by the USD,USDA ,and USDB potential. Good agreement with experiment is obtained for the binding and excitation energies. It is considered USDA , USDB and USD potential for two - body matrix element interaction as the most input parameters to the calculation is the nuclear energies, which contains realistic two (N - N) interactions. Provided the calculation is performed in a large enough basis space, the ground - state energy will converge

دراسة خصائص التفاعل النووي (?,n) للنوى الفردية - الزوجية Z?29) ? 21) Studying the Properties of Nuclear Reaction (?,n) for Odd - even Nucleus (21?Z?29)

اسم المؤلف: نور عادل محمد
اسم المشرف: فاطمة عبد الامير سميرة احمد
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: الدراسة الحالية تركزت على دراسة الخواص النووية للتفاعل النووي (الفا, نيوترون ) لنويات الهدف ذات الاعداد الذرية الفردية وللتفاعلات ( (_21^45)Sc(α,n)(_23^48)V, (_23^51)V (α,n) (_25^54)Mn , (_25^55)Mn(α,n)(_27^58)Co , (_27^59)Co(α,n)(_29^62)C , (_29^63)Cu(α,n)(_31^66)Ga (من خلال حساب المقاطع العرضية لتفاعلات (الفا , نيوترون ) للتفاعلات المذكورة اعلاه والمنشورة في الادبيات العالمية ( EXFOR , ENDF , JEF , JEFF , GENDL) لانتقاء الطاقات الملائمة في حساب التفاعل للمستوى الارضي باستعمال على برنامج الحاسوب ( (Matlab - 7.6 وبخطوات طاقية معينة . تم رسم وجدولت النتائج المستحصلة من تطبيق المعادلات شبه التجريبية لتمثيل جميع التفاعلات التي تربط بين تغير المقطع العرضي مع مدى الطاقة المعين . بالاضافة الى حساب وجدولت بعض الخواص النووية للنظائر الموجودة في هذه التفاعلات كما وتم حساب وجدولت كل من طاقة التفاعل وطاقة العتبة لكل تفاعل ومقارنتها مع النتائج الموجودة في مركز الدراسات النووية (NNDC) وهي متوافقة معها بشكل جيد جدا . وكذلك تم حساب قدرة الايقاف باستعمال برنامج SRIMو تم حساب الحاصل النيوتروني وفقا لصيغة زكلر لكل تفاعل بالاستعانة بقدرة الايقاف . وقد استعملت قيم المقاطع العرضية لتفاعلات (الفا ، نيوترون) في حساب المقاطع العرضية لتفاعلات العكسية (نيوترون ،الفا) وللمستوى الارضي وذلك باشتقاق المعادلة شبه التجريبية لقيم المقاطع العرضية العكسية لكل من التفاعلات الاتية (_23^48)V(n,α) (_21^45)Sc , (_25^54)Mn(n,α)(_23^51)V , (_27^58)Co(n,α)(_25^55)Mn , (_29^62)Cu(n,α)(_27^59)Co , (_31^66)Ga(n,α)(_29^63)Cu وايجاد الثوابت لكل تفاعل. تم رسم وجدولت النتائج المستحصله وايجاد معادلة ملائمة للرسم التي يمكن من خلالها الحصول على مقاطع عرضية بطريقة مباشرة وسريعة وبسيطة وموثوقة | This work was concerned on study the properties of (alpha, neutron) reactions for nuclei that’s have odd atomic number in nuclear reactions [(_21^45)Sc(α,n)(_23^48)V,(_23^51)V (α,n),(_ 25^54)Mn (α,n)(_27^58)Co, (_27^59)Co(α,n)(_29^62)Cu ,(_29^63)Cu(α,n)(_31^66)Ga] , by calculating the cross sections of (alpha, neutron) reactions. The nuclear reactions were published in the world libraries (EXFOR , ENDF , JEF , JEFF , GENDL) most recent to select the suitable energies in calculating reverse nuclear reactions for ground state. In the present work, the cross sections were calculated from semi - empirical formula which were obtained and listed in tables using computer programs(matlab 7.7R2008). These formulas represent the variation of the cross section with energy, which could be used to predict the values of uncalculated cross sections. The stopping power according to Zeigler formula was used in order to obtain the neutron yield for each nuclear reaction. Neutron yield is very important to determine the best way to produce specific isotopes. The evaluated cross sections for (α,n) are used to calculate the cross sections for inverse reactions (n,α) using empirical formula of the inverse cross sections .The values of neutron energy and inverse cross sections have been drown and listed in tables. Qo - value, threshold energy, reduced mass and binding energy have been calculated and listed in tables for each reaction

تحضير ودراسة متراكبات بوليمرية مدعمة من نوع PMMA/Graphene وPMMA/ZnO النانوية Preparation and Studying of Polymeric Reinforced Composites Type PMMA/Graphene and PMMA/ZnO Nanoparticles

اسم المؤلف: مصطفى عبد الكريم جهاد الاوجي
اسم المشرف: تغريد مسلم مريوش الساعدي
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم تحضير مساحيق نانوية بطريقة هامر وطريقة الصول - جل , اذ تم تحضير رقائق الكرافين باختزال اوكسيد الكرافين المحضر بطريقة هامر باستعمال مسحوق وقضبان الكرافيت , بينما حضر اوكسيد الزنك النانوي بطريقة الصول - جل . كما تم تحضير متراكبات بوليمرية نانوية بهياة اغشية سميكة بسمك نحو (0.206mm) وبهياة (Bulk) بطريقة الخلط والصب اليدوي (Hand lay - up) باستعمال راتنج بولي ميثيل ميثاكرليت (PMMA) كمادة اساس ورقائق الكرافين او اوكسيد الزنك كمادة تدعيم وبنسب وزنية (0.1,0.3,0.5,1,2)% .تم اجراء الفحوص التشخيصية للمساحيق النانوية والاغشية النقية والمدعمة باستخدام تقنيات (XRD,SEM,EDX,DLS) . اظهرت نتائج قياسات حيود الاشعة السينية ان جميع المساحيق النانوية المحضرة ذات تركيب بلوري متعدد التبلور ومن النوع السداسي , واظهرت انماط حيود الاشعة السينية ذروتين بالنسبة لاوكسيد ورقائق الكرافين بالمدى الزاوي (5 - 70)ᵒ للسطح (001) لاوكسيد الكرافين و(002) , (100) لرقائق الكرافين , بينما اوكسيد الزنك اذ ظهرت له ثمان ذروات عند المدى الزاوي (20 - 80)ᵒ للسطوح الثلاثة الاكثر شدة هي (100),(002),(101), كما اظهرت نتائج الحيود ان للاغشية النقية والمدعمة هيمنة الاتجاه (002) بالنسبة للاغشية المدعمة برقائق الكرافين ، بينما يهيمن الاتجاه (100) بالنسبة لاغشية المدعمة باوكسيد الزنك النانوي , كما اظهرت حسابات الحجم الحبيبي ان هناك تناقصا واضحا بزيادة نسب التدعيم .اوضحت نتائج فحوصات (DLS) ان الحجم الحبيبي لرقائق الكرافين كان بحدود 200nm , بينما كان الحجم لاوكسيد الكرافين 20nm واوكسيد الزنك بحدود 15.8nm , اما صور (SEM) فقد اظهرت اوكسيد الكرافين بشكل تكتل زغبي بينما الكرافين بشكل رقائق او صفائح اما اوكسيد الزنك بشكل شبه كروي وقضبان نانوية ذات اطوال مختلفة . اما بالنسبة لفحص (EDX) فقد ظهرت قمة عالية للكاربون عند (1.8 KeV) لمسحوق الكرافين واوكسيد الكرافين كما ظهرت قمة للاوكسجين (0.53KeV) تعود لاوكسيد الكرافين , اما اوكسيد الزنك فقد اظهر قمة عالية عند (1.1KeV) تعود للزنك وقمة عند (0.53KeV) تعود للاوكسجين .كما تضمن البحث دراسة الخواص البصرية للاغشية المحضرة منها قيمة فجوة الطاقة البصرية للانتقالات الالكترونية المباشرة المسموحة , وكذلك تم حساب معامل الامتصاص والانعكاسية ودراستها من خلال طيفي الامتصاصية والنفاذية ضمن مدى الاطوال الموجية (300 - 1100)nm , واظهرت النتائج ان قيم فجوة الطاقة البصرية تقل مع زيادة نسب التدعيم بالنسبة للكرافين واوكسيد الزنك ZnO.شملت نتائج القياسات البصرية ايضا حساب الثوابت البصرية المتمثلة (معامل الانكسار , ومعامل الخمود , وثابت العزل الكهربائي بجزايه الحقيقي والخيالي ) , ووجد ان هناك زيادة في قيم معامل الخمود ومعامل الانكسار بزيادة نسبة التدعيم .كما تم دراسة الخواص الحرارية والميكانيكية للمتراكب البوليمري المدعم بالمواد النانوية , ولوحظ ان الصلادة ودرجة الانتقال الزجاجي تزدادان بزيادة نسبة التدعيم . | In this study , nanopowders prepared by using Hummer's and Sol - Gel methods , Graphene was prepared by Hummer's method using graphite powder and rods graphite , while zinc oxide was prepared using Sol - Gel method. Nanocomposites were prepared in form of thick films with thickness (0.206)mm and (Bulk) by blend and (Hand lay - up) methods using resin (PMMA) as a matrix and graphene flakes or zinc oxide as reinforced materials . The nanopowders , pure and reinforced films were characterized by using the techniques (XRD,SEM,EDX,DLS) , the results of XRD exhibit in the angular range (5 - 70)ᵒ grahene oxide with surface (001) while graphene flakes have two peaks in (002) and (100) , zinc oxide in angular range (20 - 80)ᵒ exhibits eight peaks with three high intensity surfaces (101) , (002) and (100). While XRD results showed the pure and reinforced films with dominance of (002) surface in films reinforced by flakes and dominance of (100) surface in films reinforced by nano zinc oxide . DLS test showed that the particles size of graphene flakes is in the range 200nm and graphne oxide is in 20nm while zinc oxide is 15.8nm . SEM images showed graphen oxide has the form of agglomerated and graphene like flakes or plates while ZnO has semispherical and nanorods form with different lengths. EDX test showed that all powders have strong peaks , high carbon peak exhibits at (1.8KeV) while zinc exhibits at (1.1 KeV) with oxygen peak at (0.53KeV) for both graphene oxide and ZnO , and we saw other small peaks represent impurities with small weight percentages that exhibited during the preparation . Optical properties was studied for preparing thick films from absorptance and transmittance spectrum for the range (300 - 1100)nm. Results showed the energy gap is decreased by the increase of the concentration of reinforced material , the reflectance and the absorption coefficient were calculated by this spectrum .And we calculated other optical constants like refractive index, extinction coefficient and dielectric constant in its two parts .Also we saw the extinction coefficient and refractive index increase with the increase of the concentration.This work included thermal and mechanical properties. The results showed the hardness and the degree of glass transition which increased with the increase of the concentration .

نماء وميزات بلورات K2SO4 المطعمة بايونات النحاس Cu+2والحديدFe+2 Crystal Growth and Characterization of Doping K2SO4with Copper Cu+2and Ferrite Fe+2 ions

اسم المؤلف: مريم عيسى فيصل
اسم المشرف: طارق عبد الرضا علوان الظاهر
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: نماء بلورات احادية لكبريتات البوتاسيوم النقية والمطعمة بايون النحاس (Cu+2) وايون الحديد (Fe+2) الناتجة عن كبريتات البوتاسيوم K2SO4 بوصفها مادة اساس وباضافات محددة من كبريتات النحاس CuSO4.5H2O وكبريتات الحديدوز FeSO4.7H2O بنسب وزنية (1% ,2% ,3% ,5%)بوساطة تقنية التبخر البطيء للمحلول المائي في درجة حرارة الغرفة لكونها سهلة وتعطي نتائج ذات جودة مقبولة , وبمولاريةM=1 وبابعاد (9x3x2)mm3 لبلورة K2SO4 النقية وبابعاد (28x18x4)mm3 بعد اعادة التبلور , ودراسة اثر التطعيم في النماء البلوري والخصائص التركيبية , ففي حالة التطعيم بكبريتات النحاس اذ كانت ابعاد اكبر بلورة بعد اعادة التبلور عند التطعيم بنسبة 3% ,2%)) وهي (14x12x9) mm3 (12x11x12)mm3 على التوالي , اما في حالة التطعيم بكبريتات الحديدوز المائية كانت ابعاد اكبر بلورة بعد اعادة التبلور هي في النسبة 3%, اذ اظهرت الدراسة اهمية اعادة نماء البلورات لمرة اولى وثانية ومدى تحسن الخصائص البلورية الناتجة عن هذه العملية من حيث النقاوة والحجم والهيئة , فنلاحظ ان المادة في الحالة النقية تكون اكبر حجما بالابعاد , وتم التاكد من التركيب البلوري للبلورة النقية , وللبلورات المطعمة اعتمادا على مخططات حيود الشعاع السيني وتحليل بنية البلورات بوساطة مقياس حيود الاشعة السينية للمسحوق واستخدام تصفية ريتفيلد لحساب معلمات خلية الوحدة unit cell وثوابت الشبيكة للبلورات المنماة. تمتلك بلورة K2SO4 النقية قبل التطعيم النظام البلوري المعيني المتعامد المحاور (Orthorhombic) وثوابت خلية الوحدة المطابقة تقريبا لبطاقة JCPDSوالدراسات السابقة , اما للبلورات المطعمة تشير مخططات XRDالى تعرضها لبعض التغيرات في البناء البلوري وتحول النظام من المعيني المتعامد المحاور الى احادي الميل (Monoclinic) في حالة التطعيم بالنحاس بنسبتي 2% ,3% , ودراسة الانماط الاهتزازية للبلورات المنماة بتقنية FTIR اذ نلاحظ حدوث امتصاص للحزمة العريضة عند القيمة 1097 cm - 1 للبلورة النقية K2SO4 والمطعمة بتزحزح قليل يتراوح بين 3 ± عن قيمة العدد الموجي في الحالة النقية وهو ما يميز انماط الاهتزاز للمجموعة الكبريتية , واخيرا درست الانتقالات الطورية من اختبار مسعرية المسح التفاضلي DSC اذ لوحظ تغير الطور لبلورة K2SO4 في درجة الحرارة 581˚C اما العينات المطعمة فنلاحظ حدوث تزحزح بمقدار ±2 عن العينة النقية , وحساب السعة الحرارية لهذه البلورات من مخططات اختبار DSC . | Single Crystal of Pure and Cu+2 , Fe+2 doped potassium sulfate a rising from potassium sulfate as a material basis and additions specific of copper sulfate CuSO4.5H2O and ferrous sulfate FeSO4.7H2O proportions by weight (1% ,2% ,3% ,5% ) were grown from aqueous solutions by the slow evaporation technique at room temperature, for easy being and give acceptable quality results with Normality M=1 , with dimension of (11x9x4) mm3(9x3x2) mm3 and dimensions (28x18x4) mm3 after re - crystallization to crystallize pure K2SO4 , and study The influence of doping on crystal growth and synthetic properties crystalline, after doping ,in the case of doping of copper sulfate it was the biggest dimensions of crystal doped by 3% 2% after re - crystallization was (14x12x9)mm3 (12x11x12)mm3, respectively , also in the case of dopants ferrous sulfate was larger dimensions crystal after re - crystallization at in the ratio of 3% , as the study showed the importance of re - crystallization of crystals - time first and second and the extent of improvement in characteristics of crystalline resulting from this process in terms of purity, size and body , We note that the Crystal in the pure case be larger dimensions, Structure analysis of the grown crystals were obtained and confirmed by X - Ray powder diffraction measurements. The diffraction patterns were analyzed by the Rietveld refinement method to calculate the unit cell parameters of these crystals , XRD measurements show the crystal system of orthorhombic, Space group (Pnma) and constants of the unit cell, the agreement to the card JCPDS and previous studies, XRD schemes indicate to occur some of the changes in the construction of crystal Structure for dopant crystal and transformation from Orthorhombic to Monoclinic system at the case of dopante copper 2%, 3%, and study the vibrational patterns for the grown crystals by technology FTIR , where we note the occur uptake of broadband at the value of number wave 1097 cm - 1 for pure Crystal K2SO4 , and dopants Crystals occur few Shift about 3 ± from the value of the wave number from the pure case. It was that distinguishes the vibration patterns of the group sulfur, finally studied phase transitions by test Calorimetry differential scanning DSC , a change phase was observed to crystal K2SO4 at temperature 581˚C and dopants Crystals we note the occur Shift about ± 2 for the pure sample , calculate the heat capacity for these Crystal from DSC analysis schemes.

تحضير SnO2 النانوي ودراسة تاثير التشويب على الخواص التركيبية والبصرية Preparation SnO2 nanoparticles and Study the Effect of Doping on Structure and Optical Properties

اسم المؤلف: كرار امين قدوري محمد
اسم المشرف: طارق عبد الرضا علوان الظاهر
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا البحث تحضير مسحوق SnO2 النانوي النقي المحضر من املاح القصدير المتمثلة بملح SnCl4.5H2O بطريقة الصول - جل بثلاثة مذيبات مختلفة وهي الماء، والميثانول، والايثانول، وتم اجراء عملية التلدين عند درجة حرارة (400°C) .تم اختيار المذيب الايثانول لاعطائه اكبر كمية من المسحوق ومطابقته للملف ذي الرقم (JCPDS : 41 - 1445) لتحضير العينات المشوبة (بالنيكل والمغنيسيوم والكادميوم) كل على انفراد وبثلاثة تراكيز (5, 10 و%15) من كل عنصر ثم اجريت عملية تلدين لهذه العينات لدرجة (700°C).اظــهرت نتائج حـيود الشعاع السيني ان جــميـع العينات المحـضـرة تمتلك نظاما رباعيا متعددة التبلور وفحصت العينات للمدى الزاوي (°20 - °100)، وظهرت السطوح الاربعة الاعلى شدة وهي ((110, (101), (200), 211))، تم حساب الحجم الحبيبي بطريقة ديباي - شيرر وبطريقة وليامسون - هول، وبينت النتائج ان حجم الحبيبات يقل بزيادة نسبة التشويب، كما تم حساب العديد من المعلمات التركيبية كثوابت الشبيكة وفسحة السطوح، والكثافة، والمساحة السطحية النوعية، وعدد خلايا الوحدة، وكثافة الانخلاعات، والاجهادات المجهرية وعامل التشكيل وعامل طبيعة السطح. اوضحت نتائج فحوص (AFM) طبيعة السطح للعينات المحضرة، وقد تم حساب معدل الحجم الحبيبي، ومعدل الخشونة، وقيمة جذر مربع المعدل(RMS) وكانت مختلفة من حيث معدل خشونة السطح. حيث تقل الخشونة بزيادة نسبة التشويب، ويقل معدل قطر الحبيبات بزيادة نسبة التشويب التي اتفقت مع نتائج حيود الشعاع السيني وكانت تتراوح ما بين (127.71 - 69.64) nm، وقد اظهرت صور (SEM) ان اشكال الحبيبات النانوية للنماذج (P4,N3,M3,C3) كروية او شبه كروية متجمعة بهياة عناقيد وظهر البعض منها بشكل متكتل. اما بالنسبة لفحص (EDX) فقد اظهرت جميع العينات قمة عالية عند ~3.5) keV) للقصدير مع ظهور قمم صغيرة لعنصر الكلور والبوتاسيوم التي عدت كشوائب بنسب وزنية ضئيلة جدا نتيجة عملية التحضير للعينة النقية، اما العينات المشوبة فقد اظهرت قمم مادة التشويب بالاضافة الى القصدير الا ان الاوكسجين لم يظهر في فحص (EDX).ومن خلال تسجيل طيـف الامتصاص لمحلول SnO2 وضـمن مــدى الاطــوال الموجـية (300 - 900 nm)، اوضحت النتائج ان الامتصاصية تزداد بزيادة نسبة التشويب لجميع العينات، اما فـجـوة الـطاقة البصرية للانتقال الالكتروني المباشر الـمـسـمـوح باستعمال معادلة (Tauc) وباستخدام معادلة (Kubelka - Munk) فقد وجد انها تقل بزيادة نسبة التشويب. | In this research, pure SnO2 Nanopowders were prepared from tin salt (SnCl4.5H2O) by sol - gel method using three different solvents; water, methanol and ethanol. The preparered powders annealed at temperature (400°C). according to the result of prepared powder, the sample of ethanol as a solvent is taken into consideration due to the greater amount of the powder is produced and it’s in a good agreement with the File No. (JCPDS : 41 - 1445). The preparation of doped samples is performed using ethanol as a solvent with each one of the dopants (Nickel, Magnesium and Cadmium) with three percentages (5, 10 and 15)% of each element. Then nine prepared doped samples as well as the pure one were annealing at (700°C).XRD results show, all prepared samples have polycrystalline tetragonal crystal system. The scan of x - ray in the range of Bragg’s angle (20 - 100)° which revealed the four highest intensity peaks, (110),( 101),( 200) and ( 211)planes. From the diffraction pattern of each sample, the crystallite size is calculated by Debye - Sherrer and Williamson - Hall methods. Their results showed that grain size decreases with increasing ratio of doping concentration, also there has been many parameter likes; lattice constants, interplanar distance, specific surface area, number of unit cells, intensity, dislocations density and macrostrain which are calculated. AFM test revealed the morphology of the prepared samples. Their grain size, roughness and average root mean square value (RMS) are different for each sample. Surface roughness decreased with the increase of the dopant percentage. The average grain size was ranging between (69.64 - 127.71) nm and is decreased with the increase of dopant percentage and this show a good agreement with the XRD results. SEM for the sample (P4, N3, M3 and C3) revealed spherical or semi - spherical nanoparticles agglomerate in the form of a cluster. While EDX test shows a high peak at (~ 3.5)KeV of the Tin, with small peaks of chlorine and potassium which are considered as impurity and that is due to its small quantity which is resulted from the process of preparation of pure sample. In the doped samples, the peaks of dopant elements appeared in addition to that of tin, but the oxygen does not appear.UV spectra for all samples are performed by dissolving some amount of the powder in the double distilled water in the range (300 - 900) nm, their results show the absorbance increases with the proportion of dopant concentration of all samples. The optical energy gap for allowed direct transition are calculated by using Tauc and Kubelka - Munk equations, which decrease with the increase of dopant percentage.

دراسة الخصائص التركيبية والكهربائية والمغناطيسية للفرايت النانوي ذي التركيب المغزلي المحضر بطريقة السول (NixCu0.2Zn0.8 - xFe2O4) - جل ذات الا حتراق التلقائي Studying Structural , Electrical and Magnetic Properties for Nano Spinel Ferrite of (NixCu0.2Zn0.8 - xFe2O4) Prepared by Sol - Gel Auto Combustion Method

اسم المؤلف: عمار عيسى عباس نجم الربيعي
اسم المشرف: احمد رفيق عبد المجيد
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: In this research , Nano spinel ferrite (NixCu0.2Zn0.8 - xFe2O4) was synthesized using sol - gel auto - combustion and flash combustion methods .Nineteen samples were prepared and their studies were divided into three parts. Study the effect of citric acid in preparation of Nano ferrite (Ni0.1Cu0.2Zn0.7Fe2O4) by changing the molar ratio of adding fuel to any sample and the five samples were prepared from (C series). The structural properties of samples were studied using x - ray diffraction technique (XRD) and scanning electron microscope (SEM) which showed that the obtained ferrite possesses spinel cubic phase for all used molar ratios , besides when the concentration of adding fuel was increased leads to decrease in grain size and theoretical density , increase in dislocation density and the surface area. Then the molar ratio (1 : 1 M) was chosen as the best adding ratio due to that the obtained ferrite at this ratio possesses best texture coefficient with small grain size and best internal strain by comparing with the other ratios.  Study the influence of substitute (Zn+2) ion by (Ni+2) ion on the structural , electrical and magnetic properties of Nano ferrite powder (NixCu0.2Zn0.8 - xFe2O4)(0.1≤X≤0.7) synthesized using sol - gel auto - combustion method , there are seven samples were prepared (A) series and tested by two types of structural test included analyzer x - ray diffraction and scanning electron microscope, the results exhibited forming the spinel phase for all samples in spite of the substitute of (Zn+2) ion by (Ni+2) ion, and the increase of (Zn+2) ions concentration leads to decrease in the grain size and increase in theoretical density. Then the ferrite powder was divided in two groups, the first was pressed into the pellet shape which was used in electrical tests and the second group was pressed into the rings shape which was used in magnetic tests. The two faces of the pellets in first group polished by silver paste material in case to obtain a ceramic capacitors that subjected to electrical tests which included the measurement of dielectric constant , dielectric loss coefficient, alternating electrical conductivity and direct electrical conductivity ,and the study of magnetic properties for the rings samples included measurement of hysteresis loop , selfinduction, initial permeability and the relative loss factor. The results of electrical tests exhibited decrease in dielectric constant with frequency increase at room temperature , and dielectric constant increases at certain ratios of adding (Zn+2) ions and decreases at other ratios. However , the dielectric loss coefficient its fall when increasing frequency until reaches its lowest value at the high frequencies values and so it is various when the concentrations of (Zn+2) ion were changed .and the measurement of alternating electrical conductivity displaying it increases with the increasein frequency and it values disparity with the change of (Zn+2)ion concentration , in other hand the direct electrical conductivity increase with substituting (Zn+2) ion concentration increases. The magnetic tests results exhibited that the ratio (X=0.3) with chemical formula (Ni0.3Cu0.2Zn0.5Fe2O4) possesses a significant magnetic properties when compared with other samples because it has the highest initial permeability with lowest relative loss factor and it has best hysteresis loop so that it realized conditions for using it as a cores in transducers and electrical motors. Study the influence of substituting (Zn+2)ion by (Ni+2) ion on the structural properties of Nano ferrite (NixCu0.2Zn0.8 - xFe2O4)(0.1≤ X≤ 0.7) synthesized using flash combustion method, there are seven samples were prepared (F) series tested by two types of structural tests included xray diffraction and scanning electron microscope tests , and the results exhibited form the spinel phase for all samples and no other phases were presented and observed that structural results were agreed with these obtained from sol - gel auto - combustion method.

الخواص الكهربائية والتركيب الدقيق لمقاوم اوكسيد الخارصين السيراميكي المتغير المطعم بالاتربة النادرة Electrical Properties & Microstructure Of ZnO - Based Varistor Ceramics Doped With Rare Earth

اسم المؤلف: عادل اسماعيل كاظم
اسم المشرف: ايسر جمعة ابراهيم عبد الحميد رحيم مهدي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يعد اوكسيد الخارصين (ZnO) السيراميكي مادة شبه موصلة نوع - n، ويلعب دورا هاما في مدى واسع من العمليات الصناعية والمنتجات التجارية.ان من اكثر الاستعمالات اهمية استعماله لحماية الدوائر الكهربائية والمعدات الالكترونية من الجهد الزائد المدمر نتيجة البرق او الناتج من الارتفاع الكبير والمفاجيء في قيم الجهد الكهربائي, وتسمى المقاوم المتغير المعدني (Metal Oxide Varistor MOV) . يعد المقاوم المتغير نبيطة ذات سلوك غير اومي وخواصه الكهربائية تشبه تقريبا في عملها ثنائي زينر. لغرض دراسة وتوصيف مركبات مقوم اوكسيد الخارصين السيراميكي المتغير وتحسين خواصه الكهربائية, تم تحضير مركباته باضافة بعض الاكاسيد المعدنية وهي Bi2O3، Sb2O3، Co3O4، Cr2O3، وMnO2, حيث تم اختبار تاثيرها لوحدها اولا, وثانيا تم اضافة اكاسيد الاتربة النادرة (M2O3) مع الاكاسيد المذكورة اعلاه واختبار تاثيرها على المقاوم المتغير, حيث ان (M=Dy, La,Y) وبتراكيز مولية ( *10 - 3(1,5,10)).تمت عمليات التحضير والسيطرة على التركيب الدقيق عن طريق التحكم بظروف عمليات الحرق بدءا من عملية الاعداد بخلط اوكسيد الزنك مع الاكاسيد المضافة ومن ثم الحرق في درجة حرارة 600℃ وبمعدل 5 ℃⁄min في الفرن ولمدة ساعتين للعينات جميعها وذلك لازالة الغازات والرطوبة من المساحيق. بعد عملية الحرق تم كبس المساحيق بشكل اقراص بقطر 15mm وسمك 2mm تقريبا تحت ضغط يساوي 25MP.بعد عملية الكبس اجريت عملية التلبيد (تفاعلات الاطوار الصلبة والاطوار السائلة) بدرجات حرارة مختلفة ( 1050, 1100, 1150 ℃ ) وزمن ثابت للعينات جميعها مقداره ساعتين للحصول على الاشكال النهائية والوصول الى الخصائص المطلوبة.تمت دراسة بعض الخواص الفيزيائية للعينات المحضرة وهي الكثافة والمسامية والخواص التركيبية وذلك لغرض تقييم تاثير الاكاسيد المضافة وظروف التحضير على سلوك التطبيق الصناعي للعينات.وقد تبين ان مقدار الكثافة النسبية والمسامية تتاثر بدرجة حرارة التلبيد وبنسب تراكيز اكاسيد الاتربة النادرة المضافة ونوعها,فقد ازداد مقدار الكثافة بازدياد درجة حرارة التلبيد ونسبة او تركيز اكاسيد الاتربة النادرة المضافة ونتيجة لذلك فقد نقص مقدار المسامية.لقد اعطى اختبار التركيب المجهري للمادة المحضرة رؤية واضحة عن الانتشار والنمو الحبيبي , وان نتائج اختبار الاشعة السينية (XRD) اوضحت ان التركيب البلوري لها معيني قائم كما ان قيم (a, b, c) وحجم خلية الوحد قد ازداد بزيادة درجة حرارة التلبيد ونسب تراكيز الاكاسيد المضافة ونوعها.اظهرت الحبيبات النانوية والميكروية ضمن البحث الحالي تاثيرا كبيرا على الخصائص الكهربائية المدروسة والتي صممت لها اداة في المختبر لقياس معامل السلوك اللاخطي, مقدار جهد الانهيار , تيار التسرب, قابلية امتصاص الطاقة , انحدار الجهد وجهد الحدود الحبيبية.حيث تبين ان معامل السلوك اللاخطي يزداد بازدياد تركيز الاكاسيد المضافة وارتفاع درجة حرارة التلبيد ومن ثم يبدا بالنقصان بعد درجة (1100℃) بسبب تطاير وتبخر اوكسيد البزموث وطور(. (Zn7Sb2O12 بينما نقص مقدار جهد الانهيار وقابلية امتصاص الطاقة وانحدار الجهد بازدياد درجة حرارة التلبيد,اما تيار التسرب فقد ازداد مقداره بازدياد درجة حرارة التلبيد, وكذلك بالنسبة لجهد الحدود الحبيبية فقد ازدادت قيمها بازدياد درجة حرارة التلبيد. | ZnO is a ceramic material which tends to intrinsically form as an n - type semiconductor material, which plays an important role in a wide range of industrial processes and commercial products.One of most important usages is a Surge protection device which used to protect power and electronic equipment from the destructive transient overvoltage which arises from lightning or other large - magnitude surge, this device is called metal oxide varistor (MOV).Varistors are voltage dependent, non - ohmic devices whose electrical characteristics are almost similar to back - to - back Zener diodes.Improvement ZnO varistor performance accomplished by doping it by some metal oxides, Bi2O3, Sb2O3, Co3O4, Cr2O3, and MnO2, where they were testing their effect alone first, and second was added rare earth oxides (M2O3) with oxides mentioned above and test their effect on varistor, where (M = Dy, La, Y) and molar concentrations (10 - 3, 5*10 - 3, 10*10 - 3)The preparation process starts from mixing ZnO with additives, calcination at 600℃ in a furnace to remove the gases and the humidity from the powders. Then the calcined powders uniaxially pressed into discs (pellets) of 15 mm in diameter and 2 mm in thickness under a pressure equals to 25MP. After pressing the green pellets sintered under different temperatures (1050, 1100, 1150℃) and a fixed time to accomplish the final shapes and reach the desired properties of the samples.Then the densities of the samples were measured by using Archimedes Principle with mercury liquid to calculate the relative density and the porosity of each sample, and to study the effect of the sintering temperature and REO concentration, which already be obvious the effect of them. The microstructure test of the material prepared gave a clear vision for the diffusion and grain growth, although the results of XRD test showed that the crystal structure is an orthorhombic, and the values of (a, b, c) and the size of a the unit cell has been increased with increase the sintering temperature and ratios of the concentration of oxides added and kind.Micro and nano grains within the present research showed a significant effect on the studied electrical characteristics, which designed a tool in the laboratory for it and to measure the nonlinear coefficient, the amount breakdown voltage, leakage current, the potential gradient, the energy absorption capability, and the voltage per grain boundary. It was found that the nonlinear coefficient increases with the increasing of REO concentration added and increasing sintering temperature and then starts decreased after degree (1100℃ ) due to volatilization and evaporation of bismuth oxide and spinel phase (Zn7Sb2O12).The amount of breakdown voltage, potential gradient, energy absorption capability decreased with rising the sintering temperature, while the leakage current has been increased with increasing the sintering temperature, as well as the voltage per grain boundary has been increased with increasing of the sintering temperature.

دراسة الصفات الحرارية والميكانيكية وعمر الاداء PVC لبوليمر Study of the Thermal, Mechanical Properties and Lifetime of PVC Polymer

اسم المؤلف: صهيب صباح احمد
اسم المشرف: وداد حمدي جاسم محمد عبد النبي ثجيل
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: In this work, mechanical behavior of PVC product like pipes with different origins (K.S.A and Egypt) and Turkey doors with different manufacturing (Nova and Firat) which are used in Iraqi markets were studied.The objective of this work was to study the mechanical properties like ultimate tensile strength, Young's modulus, elongation at Max., elongation at break, impact strength, flexural strength and hardness of the pipes and doors.The experimental results show that K.S.A pipes exhibited maximum ultimate tensile strength and Young's modulus than that the Egypt pipes.However, the Egypt pipes exhibited maximum elongation at Max. and elongation at break when compared with K.S.A pipes.All the tensile properties of Firat doors are greater than that of Nova doors.Comparison of the flexural strength of pipes and doors. The pipes have the same flexural strength but the Firat doors have maximum value than Nova doors.Egypt pipes have a higher impact strength than K.S.A pipes. While the Firat doors have a higher impact strength than Nova doors. The experimental results of hardness Shore D indicated that K.S.A pipes exhibited maximum hardness number (83.7) than Egypt one, while the Firat and Nova doors have the same values.In this study, thermal properties of Firat and Nova have been evaluated, firstly by thermal conductivity and second by thermal stability and degradation. The Firat doors have better thermal conductivity than that of Nova doors. From the thermogravimetric analysis at different heating rates (2, 5, 10, 20 and 40 °C/min). The Firat doors have a higher thermal stability than Nova one.The Egypt pipes exhibited more thermal stability than the K.S.A pipes.From the TGA curves the activation energy of pipes and doors are determined at different conversion levels. At 30% conversion level when the mechanism of degradation would be stable and the value of activation energy of Egypt pipes and Firat doors is (108.35 KJ/mole) when it is (101.39 KJ/mole) for K.S.A pipes and (98.35 KJ/mole) for Nova doors. Thermogravimetric analysis (TGA) provides a method for accelerating the lifetime testing of polymers so that short - term experiments can be used to predict in use lifetime.The lifetime is decreased with increase of the temperature, at fixed temperature like 70 °C the lifetime of Egypt pipes is (≈100 years) while lifetime of K.S.A pipes is (≈21 years). At the same temperature (70 °C) the lifetime of Firat doors is (≈72 years) while the lifetime of Nova doors is (≈21 years).Thermomechanical analysis (TMA) test showed the glass transition temperature (Tg) and softening point (Ts) for pipes and doors. The K.S.A pipes have value for Tg and Ts higher than that of Egypt pipes, while the Firat and Nova doors have the same values.

الخواص التركيبية والبصرية والكهربائية لاغشية اوكسيد النيكل المحضرة بطريقة الترذيذ كمتحسس غازي The structural, optical and electrical properties of NiO films prepared by RF - Sputtering as gas sensor

اسم المؤلف: زينب طارق عبد الحميد
اسم المشرف: قاسم عزيز محمد محمد عبد النبي
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The structural, optical, electrical, and gas sensing properties of nickel oxide have been studied. The structural properties of the deposited films were made using XRD, SEM and AFM. The NiO films have been prepared with different thicknesses (100, 150 and 200) nm on glass, Si and Al2O3 substrates, using RF - sputtering at 100°C substrate temperature. The electrical and optical parameters of the NiO films were characterized using Hall Effect and transmittance measurements.The X - ray diffraction result indicates that the films are of polycrystalline in nature with cubic structure. The grain size of the nanoparticales observed at the surface depended of films thicknesses, where 200 nm has smallest average grain size 85.5 nm and RMS increased with increasing of thicknesses.The optical characterization shows that the film has band gap that ranged in between 3.6 eV to 3.9 eV, the average transmittance of films was found to be ranged of 60% to 85% in the VIS - IR regions. The dark conductivity of NiO films has been studied as a function of film thickness, crystal structure transformation and temperature with particular regard to gas sensitivity in CO2, NO2, CO, NO and the ethanol vapor. The electrical properties were found to be dependent on the film thickness.I - V characteristics for NiO films at (air, vacuum, N2, O2andCO2) gases before and after annealing were investigation. It would appear from our result that the diminution of the dark conductivity after annealing may be due to the surface contaminations adsorbed on the surface of the NiO film during film preparation or from ordinary atmospheric air.The resistivity of the NiO thin films decreased with increasing of thicknesses, from 1.5x105 to 5.4x104 (Ω.cm), which is related to the increase of carrier concentration with film thickness. The results of measurements of NiO thin films show that these films have good conductivities and results obtained from Hall Effect indicate that the NiO films were (p - type).It was found that the sensitivity to other gases differs for different film thicknesses and working temperature. Furthermore, NiO films exhibits high and fast response to NO2 gas at 200°C, which makes it a promising candidate for a poisonous gas sensing.

تقييم المقاطع العرضية لليورانيوم للتفاعلات المستحثة بالنيوترون Cross Sections Evaluation of Uranium for Neutron Induced Reactions

اسم المؤلف: روناك اكرام علي
اسم المشرف: ايمان طارق العلوي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: لقد تم في هذا البحث حساب قيم المقاطع العرضية لنظائر اليورانيوم (A=230 - 238) للتفاعلات المستحثة بالنيوترونات التالية ,,,(n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), (n,γ), (n,p), (n,t), (n,d), (n,α), (n,2α),and (n,2p)المقاسة بفترات مختلفة من الطاقة حيث ان هذه القراءات تم اخذها من الوكالة الدولية للطاقة الذرية (IAEA ) ومن المكتبات المشهورة عالميا مثل EXFOR, CINDA, ENDF, JEFF, JENDL,ROSFOND,CENDL,WIND, TENDL, BROND, IRDF, EAF وقد تم قياسها في الفترة الاولى من منتصف القرن الماضي وحتى اخر سنوات الماضية .لقد تم تحليل المديات الكاملة للطاقة لكل تفاعل وقد تم اعادة حساب وتقييم المقاطع العرضية ضمن فترات صغيرة مختلفة حسب مديات الطاقة للنيوترون القاصف مع الاخطاء المرافقة لها. قد تم وضع صيغ رياضية لمتعددة الحدود في معظم التفاعلات والتي تربط بين تغيير المقطع العرضي مع الطاقة والتي يمكن استخدامها للتنبىء بقيم المقاطع العرضية غير المحسوبة. لقد تم حساب قيمة Q - للتفاعل وطاقة الربط وطاقة العتبة وفرق الكتلة وعامل الرص لكل تفاعل ولكل عنصر هدف. ان التقييمات اعتمدت بشكل رئيسي على حسابات نموذج الجهد البصري لقد اعتمدت الحسابات على معاملات الجهد البصري النووي حيث تم اختيار وجمع المعلومات من مكتبة (RIPL) التابعة للوكالة الدولية للطاقة الذرية. لقد قمنا بدراسة صيغتين مختلفتين لنموذج الجهد البصري حيث ان الصيغة الاولى تسمى نموذج الجهد البصري القياسي والمعاملات ماخوذة من مكتبة Beijing والصيغة الثانية لنموذج الجهد البصري قد تم حسابها بتحديد ثلاث مديات طاقية. لقد قمنا بدراسة نسبة التفاعل (n,f) لكل نظير من نظائر اليورانيوم نسبة الى يورانيوم - 235 والذي يعتبر نموذج قياسي. لقد قمنا بحساب هذه النسبة لجميع التفاعلات المتوفرة لدينا وليس فقط تفاعل الانشطار واحتسبناها نسبة الى يورانيوم - 235.حساب اخر تم اضافته الى هذه الدراسة وهو دراسة تاثير التلوث لوليدة اليورانيوم - 237 والتي هي نبتونيوم - 237 بعمر نصفي 6.8 يوم وكذلك حساب الفيض النيوتروني لكل منهما. | The cross sections of Uranium isotopes (A=230 - 238) for the (n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), (n,γ), (n,p), (n,t), (n,d), (n,α), (n,2α),and (n,2p) reactions are calculated with different energy intervals which are collected from International Atomic Energy Agency (IAEA). The available cross sections data for the reactions mentioned above are collected from the well known international libraries like EXFOR, CINDA, ENDF, JEFF, JENDL, ROSFOND, CENDL, WIND, TENDL, BROND, IRDF, EAF and measured during the period from the middle of the last century up to several years ago.The cross sections are reproduced in fine steps of incident neutron energy in different intervals with the corresponding errors. The recommended cross sections for all available experimental data have been calculated for all considered reactions mathematical representative equations for all these reactions are formulated. These equations represent the variation of the cross section with energy, which could be used to predict the values of uncalculated cross sections.Q - value, threshold energy, binding energy, mass excess, and packing fraction for each reaction and target element have been also calculated.The evaluations are based mainly on the calculations of the optical model potential. The calculations are based on the nuclear optical potential, where the relevant parameters are collected and selected from Reference Input Parameter Library (RIPL) which is being developed under the international project coordinated by the International Atomic Energy Agency (IAEA). We study two different formula for optical model potential the first formula is the standard optical potential model and its parameters are taken from Beijing library. The second formula is the optical potential with different energy ranges. We study the ratio of the (n,f) cross sections for each Uranium isotopes relative to (n,f) cross section for U - 235 which could be considered as a standard sample. We have done the ratio not for the (n,f) cross sections only but also for other reactions like ,(n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), and (n,γ) relative to U - 235 reactions cross sections.Another evaluation is added to cross sections is the effect of the contamination of the daughter of U - 237 which the daughter is Np - 237 6.8day and their relative flux

دراسة تاثير المعاملة الحرارية على الخواص التركيبية والميكانيكية لبوليمر (بولي تيترافلورواثيلين) Study the Effect of Heat Treatment on the Structural and Mechanical Properties for poly (tetrafluoroethylene

اسم المؤلف: رند باسم لطفي الكرخي
اسم المشرف: مي عبد الستار محمد نجيب
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: درس في هذا العمل نوعين من بولي تيترافلورواثيلين ( النقيين ولكن باختلاف الشركة المصنعة PTFE) (صيني _اماراتي ) بطريقه صب المحلول كافلام رقيقه واشرطة , بواسطه الخواص التركيبيه (حيود الاشعه السينيه ومسعريه المسح التفاضلي ) والخصائص الميكانيكية بدلاله درجات حراره مختلفة للدوره الحرارية . يبين كلا النوعين تغير في الشده المستطاره من المستوى القاعدي (100) عند تغير درجه حرارة الدورة الحرارية واظهر النوعين زيادة في التبلورية مع زياة درجة الحرارة .كذلك اختلاف في الانثالبي عند اختلاف درجات الحرارة حيث لوحظ زياة الانثالبي بزيادة درجة الحرارة واختلاف في الخصائص الميكانيكيه ( الاجهاد والانفعال عند نقطة الخضوع ونقطه الكسر ومعامل يونك) للبوليمر حيث اظهرت المعالجة الحرارية للبوليمر بدرجات حرارة مختلفة من اجل معرفة خصائصه ومقاومته الى الظروف البيئية ان الخواص الميكانيكية تزداد زيادة خطيا مع زيادة درجة الحرارة .لوحظ بان انتاج الشركه المصنعة الصينية افضل من ناحية النتائج لايجاد درجة التبلورية والخصائص الميكانيكيه عن انتاج الشركة المصنعة الاماراتية لنفس المادة البوليمرية | In this study two modifications of pure polytetrafluoroethylene (PTFE) [C2F4]n. China_UAE source prepared from solution cast as film and strip have been studied by structural (X - ray diffraction (XRD), Differential Scanning Calorimetry (DSC)) and mechanical properties .subjected to different temperature heating cycle. Both modifications show variation in the scattered X - ray intensity of the basal plane (100) as the temperature of heating cycle is changed and show increasing in crystallinity with the increase of temperature .Moreover, the Enthalpy of each kind is changed with difference of heat treatment where the enthalpy increase with the increase of temperature, and two modifications show different in mechanical properties for PTFE (young's modulus, stress at break, stress at yield, elongation at yield. And elongation at break) when the temperature is change ,The heat treatment of polymer to different temperatures in order to know its properties and resistance to environmental conditions results showed that the mechanical properties increase linearly with the increase of temperature.It seems that the product company of china is better than the product company of UAE in degree of crystallinity and mechanical properties for this polymer.

دراسة التركيب المتهيج للنوى زوجية - زوجية ذات العدد الذري Z= 50, 48, 46 في المستوى المتهيج الاول Study of Excited Structure for Even - Even Nuclides of Z = 50, 48, 46 in The First Excited State

اسم المؤلف: رسل سعد هادي
اسم المشرف: فاطمة عبد الامير جاسم
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: درست الخواص الكهرومغناطيسية للنظائر زوجية - زوجية للنوى 48Cd , 50Sn و46Pd الغنية بالنيوترونات من خلال قوى الانتقال لرباعي القطب الكهربائي |M(E2)|2 W.u ↓ واحتمالية الانتقال المختزل B(E2)W.u ↓ لانتقال اشعة كاما من المستوى المتهيج الاول الى المستوى الارضي. حيث تم حساب قوى الانتقال لرباعي القطب الكهربائي |M(E2)|2 W.u ↓ بالاستعانة بمعدل العمر للمستوى المتهيج الاول والشدة النسبية لاشعة كاما المنبعثة من ذلك المستوى, بينما قيم احتمالية الانتقال المختزل B(E2)W.u ↓ استخرجت من خلال عمر النصف للمستوى المتهيج الاول المصحح لمعامل التحول الداخلي.وللحصول على قيمة دقيقة لانتقال رباعي القطب الكهربائي ↓ E2, تم حساب ورسم القيم المتبناة لكل من |M(E2)|2 W.u ↓ وB(E2)W.u ↓ كدالة لعدد النيوترونات.في هذا البحث, تم تحويل القيم المتبناة لانتقال ↓E2 الى قيم احتمالية الانتقال المختزل B(E2) ↑ e2b2 والتي افادتنا في دراسة تركيب النوى من حيث الاختلاف في الشكل لان عامل التشوه β تم استخراجه من B(E2) ↑ e2b2, كما ان دراسة تاثير عدد النيوترونات على سلوك كل من B(E2) ↑ e2b2 وβ في المتسلسلات الايزوتونية لنوى 48Cd , 50Sn و46Pd يعطي معلومات جيدة حول التشوه في النوى.تركزت دراستنا على ثلاث انواع مختلفة من النوى, الاول بعدد ذري سحري50 , والثاني بعدد ذري شبه سحري 48, والثالث بعدد ذري بين القشرات المغلقة 46.في نهاية العمل الحالي تم عمل مقارنة جيدة للحسابات الحالية لقيم احتمالية الانتقال المختزل B(E2) ↑ e2b2 وعامل التشوه β مع معظم القيم العملية والنظرية الحديثة. | Electromagnetic properties for even - even nuclides in neutron - rich nuclei such 50Sn, 48Cd and 46Pd have been studied through the electric quadruple transition strength |M(E2)|2 W.u ↓ and the reduced transition probability B(E2)W.u ↓for γ0 - transition from first excited state to the ground state. The electric quadruple transition strength |M(E2)|2 W.u ↓ is calculated by using life - time for excited state with the intensity of γ0 - transition, while B(E2)W.u ↓ is extracted from half - life time to state corrected for internal conversion coefficient. To obtain precise value for the transition of E2↓, the adopted value for |M(E2)|2 W.u ↓ and B(E2)W.u ↓ was calculated and plotted as a function for neutron number. In present work, the adopted values for the transition of E2↓ are converted to B(E2)exp ↑ e2b2 which helped us to study the structure for nucleus, such as the variation in shape, because the deformation parameter β is extracted from B(E2) ↑ e2b2 and the study for behavior of each of B(E2) ↑ e2b2 and β versus neutron number in isotonic chains to 50Sn, 48Cd and 46Pd gives good information about the deformation in nuclei. Our study focused on the three different types of nuclei, the first with atomic magic number 50, the second with semi - magic atomic number 48 and the third nucleus with atomic number between closed shells 46. At the end of the present work, the good comparisons for the present calculation to the values of the B(E2) ↑ e2b2 and β with most recent values of experimental and theoretical was done.

تقدير الحاصل النيتروني لبعض نوى النظائر المتوسطة نتيجة لتفاعلات البروتون وجسيمات الفا والنيوترون لمدى طاقة (E=10 - 50) MeV

اسم المؤلف: رافت عبد الحسن مسلم
اسم المشرف: خالد هادي مهدي العبيدي
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: للنظائر اهمية كبيرة في كثير من المجالات مثل المجالات البحثية والصناعية والطبية ومجالات اخرى. فبعضها يحتاج لنظائر بنصف عمر طويل او بنصف عمر قصير وحاصل نيتروني عالي او قليل للحالتين, لذا تضمن هذا العمل دراسة الخصائص النووية لتسعة عناصر متوسطة الاعداد الكتلية هي (Ca ,Sc ,Ti ,Ni ,Cu ,Zn ,Zr ,Nb ,Mo ), ولكل عنصر تم اختيار عشرة نظائر لذا تضمنت الدراسة 90 نظير اعدادها الكتلية بين (41 الى 96) , شملت هذه الدراسة حساب طاقة التفاعل, طاقة العتبة, الكتلة المختزلة, طاقة فصل النيوترون وطاقة الربط النووية لتفاعلات ,Ca(α,n)Ti Ni(α,n)Zn , Zr(α,n)Mo , ,Sc(p,n)Ti ,Cu(p,n)Zn Nb(p,n)Mo , ,Ti(n,n)Ti Mo(n,n)Mo ,Zn(n,n)Zn لنظائر العناصر اعلاه , كما تم حساب قدرة الايقاف باستعمال برنامج (SRIM 2013) ومن ثم حساب الحاصل النيتروني من المعادلات النظرية اعتمادا على احدث ما نشر من المقاطع العرضية للعامين (2010 ,2012 ), كما تم في هذه الدراسة استخراج مجموعة من المعادلات شبه التجريبية الموحدة لحساب المحصول النيتروني لهذه العناصر بشكل مباشر لنوعين من التفاعلات (α,n) و(p,n) والتي كل منها يشتمل على عشرة نظائر ليكون المجموع 60 تفاعل, نتائج الحاصل النيوتروني المحسوبة من هذه المعادلات اعطت توافقا جيدا مع القيم النظرية التي حسبت من المعادلات النظرية. هذه المعادلات مع ثوابتها وضعت ضمن برنامج ماتلاب صمم لهذا الغرض وبالاعتماد على نوع العنصر ونوع التفاعل وطاقة الجسيم الساقط لايجاد الحاصل النيتروني لاي نظير عدده الكتلي بين (40 - 100 ) لمدى طاقة يتراوح بين (15 - 50) مليون الكترون فولط. يمكن تطوير البرنامج ليشمل عدد اكبر من العناصر بنظائرها ولمديات طاقة اوسع. | Isotopes have a great importance in many fields such as research, industrial, medical and other. Some of them need isotopes with long half life or short half - life with high neutron yield or less for them. So this work included the study of the nuclear properties for nine medium elements (Ca, Sc, Ti, Ni, Cu, Zn, Zr, Nb and Mo), from each element we choose 10 isotopes, so the total are 90, their masses numbers were between (41 to 96), this study included the calculations of the Q - value reaction, threshold energy, reduced mass, separation energy of neutron and the binding energy for nuclear reactions , Ca(α,n)Ti , Ni(α,n)Zn , Zr(α,n)Mo , Sc(p,n)Ti , Cu(p,n)Zn , Nb(p,n)Mo , Ti(n,n)Ti Mo(n,n)Mo and Zn(n,n)Zn for the isotopes of the above elements, also we calculated the stopping power by using a (SRIM 2013), then the neutron yield was calculated from theoretical equations depending on most recent cross - sections (2010.2012), as well as this study focused on the extraction of a set of uniform empirical equations to calculate the neutron yield in directly for (α, n) and (p, n) reactions for these elements, and each of them includes 10 isotopes so the total reactions are 60. The result of neutron yield for these equations was in a good agreement with theoretical value which is calculated from the theoretical equations. These set equations with their coefficients were put within the MATLAB program, it was designed for this purpose and by depending on the element type, the type of reaction and incident particle energy to find the neutron yield for any isotope, their mass number is between (40 - 100) for energy range within the (15 - 50) MeV. This program can be developed to include a greater number of elements with their isotopes and for larger energy range.

تحضير ودراسة سلوكيات الرص لمتراكبات (الومينا - المنيوم) Preparation & Studying the Compaction Behaviors of the (Alumina - Aluminum) Composite

اسم المؤلف: حنان جميل مصطفى
اسم المشرف: عبد الحميد رحيم مهدي الصراف
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم تحضير المتراكب السيرميتي (سيراميك - معدن) من مادة الالومينا (Al2O3 - γ( كمادة اساس، ومن معدن الالمنيوم (Al) كمادة تدعيم، لتراكيز مختلفة من الالمنيوم (0 - 50)%، ونسبة زيادة التدعيم 10)%).تمت عملية التشكيل باستعمال الضغط باتجاه واحد، وانجزت عملية التلبيد في جو مفرغ من الهواء. درست سلوكيات الرص بحالة التلبيد الصلبة عند درجات حرارة التلبيد (400، 450، 550) م° ، وازمان التلبيد (2، 4، 6) ساعات، وعند ضغوط تشكيل (50، 100، 150) بار، تم الحصول على افضل الخواص الفيزيائية عند (550م°، 2ساعات، 150ساعة). تمت دراسة حالة تلبيد الطور السائل كدالة لتغير نسبة الالمنيوم في المتراكب عند (800م°، 2ساعة، 150بار)، بناء على ما تم التوصل اليه من خواص فيزيائية جيدة عند حالة التلبيد بالطور السائل، اختيرت هذه المواصفات لدراسة تاثير تغير الضغط عند (50، 100، 150) بار على الخواص الفيزيائية للمتراكبات السيرميتية المحضرة. اظهرت السلوكية عند المنطقة التي تحتوي تركيز الالمنيوم (40 - 50)% افضل الخصائص الفيزيائية، تبعا لذلك، درست اغلب القياسات على التركيز صاحب نسبة 50% من مادة الالمنيوم. المفهوم الاساسي الذي تضمنته هذه الدراسة هو التلاصق الفيزيائي بين مكونات المتراكب السيرميتي المحضر، والذي كان واضح من فحص انحراف الاشعة السينية. كذلك من الفحص المجهري (SEM) نلاحظ ان المتراكب النهائي (السيرميتي) المحضر اشبه الى ما يكون جزر موصلة (مادة الالمنيوم) مفصولة بمناطق عازلة (مادة الالومينا) وهذا ناتج بفعل التلاصق الفيزيائي. لوحظ ان زيادة نسبة الالمنيوم للمتراكبات المحضرة يلعب دورا مهما في الخواص الفيزيائية والكهربائية والتي تم مناقشتها بالتفصيل، وكذلك حسن من قيمة الصلادة للمتراكبات المحضرة، حيث ان التوزيع العشوائي لدقائق الالمنيوم ضمن مادة الالومينا، كون اقرب الى ما يكون الى شبكة داخلية معدنية زادت من متانة المتراكب المحضر من خلال ملء المسامات الموجودة غالبا بسبب مادة الالومينا الهشة. من خلال هذه الدراسة توصلنا الى ان المتراكب المحضر له نسبة مسامية عالية والتي يمكن توظيفها في صناعة فلترات الوقود. كما يمكن توظيف الخواص العزلية المحسنة التي توصلنا اليها في صناعة المتسعات السيرميتية (cermet capacitors )، كذلك من خواص مقاومة البلى التي توصلنا اليها، ممكن توظيفها في تصنيع ادوات القطع والبرد بعد اجراء التحسينات اللازمة. | A cermet (ceramic - metal) composite have been prepared from alumina ceramic (γ - Al2O3) as a matrix and from aluminum metal (Al) as reinforcement, prepared for different concentrations of aluminum (0 - 50)%, the reinforcing increment is (10%).The forming process was done by single action pressing, and the sintering process was done in vacuum atmosphere.The compaction behaviors of prepared cermet bodies were studied in solid state sintering, at sintering temperatures (400, 450, 550) °C, sintering times (2, 4, 6) hrs. and forming pressures (50, 100, 150) bar, the best physical properties were gained at (550 °C, 2hrs., 150bar).Liquid phase sintering process was studied as a function of Al percent in the composite at (800 °C, 2 hrs., 150 bar). According to the interesting physical properties we gained from liquid phase sintering process, these parameters were chosen to study the effect of the forming pressure ((50, 100, 150) bar) on the physical properties of the prepared cermet bodies. The behavior at the region that have aluminum concentration (40 - 50)% showed the best physical properties, according to this, most of the measurements were studied on the concentration of 50% of aluminum material. The basic concept of this study is the physical adhesion between the material particles of the prepared cermet bodies, which was obvious from the XRD tests. Also from the SEM micrograph we have notice the final structure of the prepared cermet, which is more like conducting islands (aluminum) separated by isolated areas (alumina), which is a sequent of the physical adhesion action.Increasing of aluminum content in the composite materials prepared may play an important role in physical and electrical properties has been discussed in detail, also enhanced the hardness of the samples, where the random distribution of aluminum particles through the alumina material, makes more like internal web of metal, that helps to increase toughness of samples by filling the porosities existed because of the brittle alumina.From this study we noticed, we have relative high porosity that could be employed in fuel filters. Also we have fine dielectric properties that could inter the application of cermet capacitors. Also, we have reasonable wear result that can be employed in grinding and cutting tools after improvements have been done.

تشخيص ورم الكبد من الصور المقطعية باستخدام معالجة الصور الرقمية Diagnosis of Liver Tumor from Computed Tomography Images using Digital Image Processing

اسم المؤلف: انتظار مالك هادي
اسم المشرف: علياء حسين علي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: معالجة الصور
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: This work aims to detect and diagnoses liver tumors from Computed Tomography images using digital image processing, this is a modern technique which depends on using computer in addition to textural analysis to obtain an accurate liver diagnosis, despite the method's difficulty that came from liver's position in the abdomen among the other organs. This method will enable the surgeon to detect the tumor and then easing treatment also it helps physicians and radiologists to identify the affected parts of the liver in order to protect the normal parts as much as possible from exposure to radiation. This work describes a new 2D liver segmentation method for purpose of segmented as a treatment for liver tumors. Liver segmentation is not only the key process for volume computation but also fundamental for further processing to get more anatomy information for individual patient. Due to the low contrast, blurred edges, large variability in shape and complex context with clutter features surrounding the liver that characterize the CT liver images. The method has been implemented in MATLAB and a Graphical User Interface was created. These imaging studies have contained a total of 22 CT images, including five Haemangioma, five Cyst, five Cirrhosis, five carcinomas and two healthy livers. Calculating the area of the abnormal part (tumor), an algorithm has been created to colored images depending on the boundary. The images have been transformed from RGB color space to HSV color space to identifying different colors in fabric by analyzing the HSV color space. This helps to separate abnormal part in to K - clusters. The method is very effective and gives the best result for classification process. Since it depend on the color of the texture and on the distance between the classes. The 2D segmentation process which is based on the hybrid method which is the combination of modified k - Mean (which depend on the distance and color), and the statistical structure which is the first order statistical feature. The statistical features are : Mean, Variance, Standard deviation, Skewness, Kurtosis, Energy and Entropy, and the geometrical feature which are area and the irregularity. These features together helps to diagnose the liver tumor and to classify these tumor

حساب الحاصل النيوتروني للتفاعلات (?,n) و(p,n) لبعض النوى المتوسطة لمدى طاقي (50 - 100 MeV) باعتماد المعادلات شبه التجريبية Neutron Yield Calculations for (?,n) and (p,n) reactions for Some Intermediate Nuclides in the Energy rang (50 - 100MeV)by using Semi - empirical formula

اسم المؤلف: اسيل عادل يوسف
اسم المشرف: خالد هادي مهدي العبيدي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ان اغلب المقاطع العرضية لاغلب النظائر المشعة تكون مفقودة عند طاقات معينه في المختبرات العالمية ، لذا تم استخراج مجموعة صيغ رياضية شبه تجريبية موحدة لحساب الحاصل النيوتروني بالاعتماد على العدد الكتلي للنظير وطاقة القذيفة ، اما طاقة منفردة او مدى من الطاقات . تم العمل على جمع بيانات المقاطع العرضية مقابل الطاقات للمدى (50 - 100 MeV)من المختبرات العالمية (Koning , A . J . ; TENDL - 2010 - 2012) لنوعين من التفاعل (α,n) و(p,n) مع نظائر اربعة عناصر( 33As, Fe26 , Mn25 ، (32Geلكل عنصر عشرة نظائر فيصبح مجموع التفاعلات اربعين تفاعل كما تم حساب قدرة الايقاف للبروتون ولجسيمة الفا بوساطة برنامج (SRIM - program - 2013)، ومن ثم حساب الحاصل النيتروني باستخدام برنامج (الماتلاب2008a)، وهو مصمم لهذا الغرض ، تم حساب طاقة اللاتناظر لكل نظير ومن ثم استخراج صيغ رياضية من خلال افضل عملية ملائمة (fitting) بين طاقة اللاتناظر والحاصل النيوتروني للتفاعل عند الطاقات (50,60,70,80,90,100 MeV) لاهداف نوى متوسطة مختلفة . وضعت المعلمات الاولية المستخرجة من الصيغ الرياضية في جداول ، ورسمت العلاقة بين كل مجموعة معلمات والطاقة المقابلة لها لغرض استخراج معادلات موحدة ، والتي من خلالها تم ادخال متغير الطاقة في المعادلة الاساسية المستخرجة ، وبعد رسم العلاقات وجدنا المقاطع العرضية للتفاعل (α,n) اصغر من التفاعل (p,n) ، وان الحاصل النيوتروني يزداد مع زيادة طاقة الجسيم الساقط وتناقص العدد الكتلي ، وان النتائج المحصلة من الصيغ الرياضية الجديدة المعتمدة على القيم العملية في تطابق جيد مع النتائج النظرية المنشورة . | cross sections for many reactions for most of isotopes with different energies in international laboratories were missed so we get a mathematical semi - empirical equations for calculating the neutron yield depending on mass number of target and projectile energy (single enrgy or range of energy ) . Data of cross sections were collected from international libraries (TENDL,Kong) from 2010 to 2012 for tow types of reaction (α,n) and (p,n) for energies (50 - 100MeV) with ten isotopes of (33As , 26Fe , 25Mn , 32Ge) elements , that is mean the total number of reaction will [40] reaction , then stopping power for proton and alpha particle were uese calculated using SRIM program 2013 then neutron yield was calculation using Matlab program 2008a designed for this purpose so as asymmetry energy for each isotope then by fitting relation of asymmetry energy with neutron yield for, the reaction at energies (50,60,70,80,90,100) MeV with intermediate nuclide we get . The parameters were tables and from their relations with energy we get final set of semi - empirical equations, then it was drown , we from this fingers we concluded that the cross sections for (α,n) reactions were less than (p,n) reactions and the neutron yield in cress with increasing the projectile energies and with decreasing of atomic number all the results that got from this new semi - empirical equations that we got from experiment data was in good agreements with published the data .

دراسة الخواص التركيبية والبصرية لاغشية cdse : Al الرقيقة كدالة لنسب التشويب ودرجة حرارة التلدين Study Structural And Optical Properties of CdSe : Al Thin Films As A Function of Doping Ratio And Annealing Temperature

اسم المؤلف: عباس حيدر حسين
اسم المشرف: علية عبد المحسن شهاب
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا البحث وبنجاح تحضير سبيكة CdSe داخل انبوبة من الكوارتز مفرغة من الهواء عند ضغط ((10 - 2 mbar، وتم فحص تركيب هذه السبيكة بوساطة حيود الاشعة السينية (XRD)، ووجد ان تركيبها متعدد التبلور ويمتلك شكلا سداسيا.درست الخواص التركيبية والبصرية لاغ | In this work, CdSe alloy have been prepared successfully in an evacuated quartz tubes at pressure (10 - 2 mbar). The structure of the ingots was examined by X - ray diffraction (XRD) and found to be polycrystalline of Hexagonal structure. we studying t

تصنيع ودارسة خصائص كاشف ضوئي من المفرق الهجيني cdo : Al/si Fabrication And Study of Photodetector Properties From Cdo : Al/Si Heterogunction

اسم المؤلف: اياد احمد صالح
اسم المشرف: سمير عطا مكي علية عبد المحسن شهاب
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا البحث, تم تصنيع كاشف ضوئي من المفرق الهجين (n - CdO : Al/p - Si) ثم دراسة خصائصه, والمحضر من ترسيب اغشية (CdO) النقية والمطعمة بالالمنيوم (CdO : Al) بطريقة التبخير الحراري في الفراغ على قواعد سليكونية احادية البلورة باتجاهية (111). اذ تم تحضير هذه | In this work, photovoltaic detector of (n - CdO : Al/p - Si) heterojunction has been fabricated and its properties were studied, which prepared by deposition CdO and CdO : Al via thermal evaporation under vacuum method on an (111) oriented single crystal

تصنيع مفرق هجين للمركب (CuIn1 - XGaxSe2) واستخدامه كخلية شمسية Fabrication Heterojunction of Compound (Cuin1 - Xgaxse2) And Used As Solar Cell

اسم المؤلف: علي حسين عبد الرزاق
اسم المشرف: ايمان حميد خضير حسون الميالي بشرى كاظم
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: حضرت في هذا البحث سبائك للمركب الرباعي (CIGS) على وفق الصيغة الكيميائية (CuIn1 - xGaxSe2) لقيم مختلفة لـ (x)، (x= 0.3, 0.6, 0.9) باذابة عناصر السبيكة في انبوب مفرغ من الكوارتز تحت ضغط (2×10 - 3mbar)، وباجراء فحوصات حيود الاشعة السينية لمساحيق السبائك الث | In this research (CIGS) quarter compound alloys prepared for chemical formula (CuIn1 - xGaxSe2) for different x (x=0.3,0.6,0.9) by melting them in a evacuated quartz tube (2×10 - 3 mbar).XRD analysis show that all three alloy prepared (powder) are polycr

دراسة نظرية لقدرة الخرج في ليزر الليف البصري المطعم بالثوليوم Theoretical Study of The Output Power In Thulium - Doped Optical Fiber Laser

اسم المؤلف: اسيل صالح طه
اسم المشرف: سمير عطا مكي مظهر شهاب احمد
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: انطوت الدراسة الحالية على المعالجة النظرية لاشتقاق معادلة قدرة الخرج الليزري باستعمال معادلات المعدل لنظام ليزري مستمر الموجة والذي يعمل وفقا لخطة الضخ شبه الثلاثية لمستويات الضخ والانبعاث، حيث يصل فيه الضخ مباشرة الى مستوى الليزر العلوي ويكون امتصاص ال | This study is a theoretical treatment to derive the equation of laser output power using the rate equations for a continuous - wave laser system operation by quasi - three - level system for pumping and lasing, Where the pumping up directly to the upper la

دراسة تاثير درجة حرارة التلدين على الخصائص التركيبية والبصرية لاغشية znse الرقيقة Study The Effect of Annealing And Thickness on Structural And Optical Properties of Znse Thin Films

اسم المؤلف: فاضل بجاي معيبد
اسم المشرف: علية عبد المحسن شهاب ايمان حميد خضير
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا البحث تحضيرسبيكة من مركب ZnSe ثم تحضير اغشية رقيقة بسمك (250,350,450,550±20)nm ومعدل ترسيبnm/sec (2±0.1).التي رسبت على قواعد زجاجية بطريقة التبخير الحراري بالفراغ عند درجة حرارة الغرفة للقاعدة المرسب عليها. ومن ثم تلدين النماذج عند درجة حرارة K | In this work compound of Zinc selenide (ZnSe (prepared and then thin films of (ZnSe) have been prepared at thickness (250,350,450,550±20)nm with deposition rate (2±0.1)nm/sec, deposited on glass substrate by using thermal evaporation in vacuum at R.T and

تحضير ودراسة الخواص التركيبية والبصرية لاغشية CdTe : Cu Prepreation And Study The Structural And Optical Properties of Cdte : Cu

اسم المؤلف: سلام حميد فياض
اسم المشرف: سمير عطا مكي بشرى كاظم حسون
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تناول هذا البحث دراسة الخواص التركيبية والبصرية لاغشية تيليرايد الكادميوم(CdTe ) الرقيقة المحضرة بطريقة التبخير الحراري بالفراغ, بسمك450±25) nm ) المرسبة على قواعد من الزجاج بدرجة حرارة الغرفة (R.T) بمعدل ترسيب(2.5nm/sec), اذ تم دراسة تاثير تغير نسب التش | In this research we studied the structural and optical properties of Cadmium Telluride (CdTe) thin films which have been prepared by thermal evaporation deposition method on the glass substrate at R.T with thickness (450 ? 25) nm with value deposition (2.

دراسة الخواص الميكانيكية والسلوكيات الديناميكية لمتراكبات منفردة وهجينة Astudy of the mechanical and dynamic behaviors of the single and hybrid composite materials

اسم المؤلف: مريم اسامة عبد الكريم
اسم المشرف: عبد الحميد رحيم الصراف
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى: