عرض: 25 50 75 100 النتائج

نتائج البحث: 25 من أصل 4,467

تصنيع ودراسة الخصائص الفوتوفولتائة للوصلة TiO2 (1 - x) Bix/Si بواسطة الترسيب بالليزر النبضي == Synthesize and Characterization of TiO2(1 - x)Bix/Si Photovoltaic by Pulses Laser Deposition

اسم المؤلف: ميسون ذياب راضي
اسم المشرف: صباح نوري مزهر | غصون محمد حميد
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا البحث استخدام طريقة الترسيب بالليزر النبضيPLD بواسطة ليزر Nd : YAG ذي الطول الموجي nm1064λ= وبمعدل تكرار Hz6 وفترة نبضة ns10 لترسيب اغشية رقيقة بنوعية عالية لثنائي اوكسيد التيتانيوم النقية والمشوبه بالبزموث وبنسب وزنية مختلفة (0, 3, 5, 7, 9) % تم الترسيب على قواعد زجاجيه ورقائق السليكون وذلك لدراسة تاثير التشويب على كل من الخصائص الفيزيائية لاغشية ثنائي اوكسيد التيتانيوم، وثم قياس خواص الكاشف TiO2 : Bi/ Si..بينت قياسات حيود الاشعه السينيه لاغشية ثنائي اوكسيد التيتانيوم النقية والمشوبة بنسب مختلفة (0, 3, 5, 7, 9) % بالبزموث بان هذه الاغشية تمتلك تركيب عشوائي للاغشية النقية تتحول الى متعدد التبلور عند التشويب والتلدين وذات تطابق جيد مع القمم القياسية لطوري Anatase وRutile وكان الاتجاه السائد للحبيبات هو باتجاه (110) Rutile مع زيادة التبلور بزيادة نسبة التشويب وخاصة لطور ال (Rutile)حتى نسبة 7% ومن ثم يتناقص عند نسبة التشويب 9% مع ظهور قمم صغيرة مطابقة لقمم البزموث . كذلك ازدياد درجة التبلور وخصوصا للطور (Rutile)عند زيادة درجة حرارة التلدين من درجة حرارة الغرفة الى 525 كلفن.تبين من دراسة سطح الاغشية بواسطة مجهر القوى الذريه ان الحجم الحبيبي يزداد بزيادة التشويب ثم يتناقص عند نسبة التشويب 9%. بينت دراسة اطياف النفاذية في مدى الطول الموجي ( nm1100 - 300) ان قيمة النفاذية لاغشية TiO2 النقية عند الطول الموجي 500nm تساوي 52.4 % وتناقصت عند التشويب بالبزموث , كذلك فقد وجد ان فجوة الطاقة البصريه لاغشية اوكيسد التيتانيوم النقية 3.7 الكترون فولت وقلت عند التشويب حيث تصل الى 2.2 الكترون فولت عند نسبة تشويب % 9.بينت دراسة الخصائص الكهربائية لاغشية ثنائي اوكسيد التيتانيوم النقية والمشوبة المتمثلة بتوصلية التيار المستمر في مدى درجة حرارة K(473 - 303) ,ان هذه الاغشية تمتلك طاقتا تنشيط وبزيادة نسب التشويب تقل قيمها وتزداد التوصيلية، ومن نتائج تاثير هول لتحديد نوع الحاملات يتضح بان كافة الاغشية المحضرة هي ذات حاملات من نوع السالب وبزيادة نسب التشويب والتلدين تزداد كثافة حاملات الشحنة وتتناقص التحركية. تزداد قيمة الاستجابية والكفاءة والكشفية النوعية لكاشف ال TiO2 : Bi/Siمع التلدين ومع زيادة نسبة التشويب بالبزموث من 0 - 7% ثم تقل عند نسبة 9% بينما تتصرف القدرة المكافئة للضوضاء عكس ذلك. تصل الاستجابية الى قمة عند 0.3 مايكرومتر ل TiO2النقية تتزحزح الى 0.6 عند زيادة نسبة البزموث الى 9% والى 0.4 عند التلدين بدرجة 523 كلفن كنتيجة لنقصان فجوة الطاقة | Pulse laser deposition is used in this research by Nd : YAG laser with λ=1064 nm average frequency, 6 Hz and pulse duration 10 nm) to deposit pure and content TiO2 thin films with Bismuth at different ratio (0, 3, 5, 7,and 9)wt. % on glass and Silicon wafer substrates to study the effect of content on the physical properties of TiO2 thin films and then study the TiO2 : Bi/ Si detector characteristics.X - ray diffraction pattern measurements for pure and contented titanium dioxide films with different content ratio of Bi (0, 3, 5, 7 and 9)% show that these films amorphous structure converted to polycrystalline structure with annealing and content and have a good identically with standard peaks for Anatase and Rutile phases. The preferred orientation is along (110) direction for Rutile. The crystallinity of the films increase with increasing content ratio to 7% Bi and specially for rutile phase then decrease at 9%. The crystallinety went up when annealing temperature increases from RT to 525K.From Atomic Force Spectroscope, a topography of prepared films show an increment in average diameter with content ratio then it started to decrease when it reach 9%.UV - visible spectra from 300 to 1100 nm shows that the pure TiO2 film has 52.4% transmittance at 500 nm wavelength. The transmittance decreases with increasing of content ratio with Bi. The optical energy gap for pure TiO2 film is about 3.7 eV and decrease with content until it reaches 2.2 eV at 9% Bi content.The results of electrical properties are represented by DC conductivity in temperature range (303 - 473) K for pure and contented TiO2 films show that these films have two activation energies and with increasing content ratio, these activation energies decrease and the conductivity decreases, as well Hall effect measurements show that all films have n - type charge carriers and its concentration increases and the mobility decreases with content and annealing.The responsivity, quantum efficiency and the specific detectivity for TiO2 : Bi/Si detector increase with annealing and with increase Bi content from 0 to 7% then decrease at 9% , while the NEP has inverse behavior. The responsivity reached peak at λ= 0.3 μm for pure TiO2 and this peak shift to 0.6 μm when Bi content increase to 9% and shifted to 0.4 μm when annealed at 523 K as a results of decreasing the energy gap

دراسة التغيرات الحاصلة في منطقة ميسان باستخدام صور الاستشعار عن بعد للفترة 2000 - 2013 == A Study the Change Detection in Maysan Province Using Remote Sensing Images between 2000 and 2013

اسم المؤلف: ميساء رابع نعيمة
اسم المشرف: علياء حسين علي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: معالجة الصور
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ان طريقة اكتشاف التغيرات هي طريقة لتحديد التغيرات في مشهد لمنطقة ما .ولغرض دراسة هذه التغيرات نستخدم صور فضائية بحزم مختلفة وازمان مختلفة . في الدراسة الحالية تم استخدام صور القمر الصناعي Landsat - 7 ETM)) لفترة بين (2000 و2013) لغرض دراسة التغيرات الحاصلة في جنوب العراق وتحديدا لمنطقة ميسان عدة خوارزميات تم استخدامها لغرض مراقبة وتحديد التغيرات الحاصلة خلال سنوات الدراسة علما ان المنطقة قد تعرضت الى تجفيف الاهوار في سنة 2000 وبعد 2003 تم غمر المنطقة بالماء وعادت مياه الاهوار . ان الدراسة التقليدية لتميز التغيرات التي تحصل بالمناطق خلال السنوات هي الطرح (طرح الصور) وطريقة القسمة (قسمة الصور). ان طريقة تحليل المركبات الاساسية هي طريقة جيدة تستخدم لغرض تحديد وتميز التغيرات التي ممكن ان تحصل خلال سنوات بعيدة . ان طريقة تحليل المركبات الاساسية هي طريقة احصائية تجعل البيانات المترابطة بيانات غير مترابطة وعادة المركب الاساسي الاول (PC1) يحمل الكمية الكبيرة من المعلومات وبقية المركبات تحتوي على المعلومات المتبقية التي لم تظهر في المركب الاول وعادة يكون المركب الاخير هو الضوضاء.في هذا البحث تم استخدام ست حزم اخذت من القمر الصناعي (Landsat - 7 ETM) لغرض دراسة التغيرات الحاصلة في منطقة العمارة في محافظة ميسان وتحديدا هور الحويزة خلال السنوات بين 2000 و2013. طرق متعددة تم استخدامها لغرض دراسات التغيرات الزمنية والمكانية للمنطقة. ومنها طريقة الطرح والقسمة ( طرح الصور الفضائية بين 2000 و2013 وناتج عملية القسمة ) وتم استخدام نتائجها مع ( PCA ) لغرض الحصول على افضل طريقة لدراسة التغيرات الزمانية والمكانية . لقد تم استخدام طريقة التصنيف الغير موجة (K - mean) التي اعتمدت على اللون والمسافة بين الاصناف لغرض تحديد التغيرات الحاصلة في الفترة الزمنية البعيدة . ايضا تم استخدام طريقة هجينة وهي ناتج طرح الصور بين 2000 و2013 وطريقة القسمة مع (K - mean) .تم تصنيف ناتج (PCA) مع القسمة والطرح بطريقة (K - mean) بالاضافة الى تصنيف الصور الفضائية (2000 و2013) مع (PCA) لها حيث اخذت (PCA) لكل حزمة عند (2000 و2013) وبعد ذلك تم تصنيفها اعتمادا على المسافة واللون بين الاصناف وتم حساب الخصائص الاحصائية والمساحات لكل صنف لمنطقة هور الحويزة والمناطق المجاورة له . اظهرت النتائج ان عملية الطرح هي افضل من عملية القسمة في تمييز التغيرات لان (PC1) يحوي على 91.37% من المعلومات وان عملية القسمة تعطي 64% لل (PC1) من نسبة المعلومات الموجودة في الحزم المستخدمة لغرض الدراسة . في هذه الدراسة تم استخدام برنامج ENVI وبرنامج MATLAB للكشف عن التغيرات الحاصلة في منطقة ميسان . | Change detection is the process of identifying the difference in the scenes of an object or a phenomenon, It uses multi - temporal image data sets from landsat - 7 ETM between 2000 and 2013 in order to detect changes in the area of southern Iraq province of Maysan and from spectral discrepancies. Many algorithms have been applied to monitor various environmental changes. The traditional ways to detected the changes in regions are the image difference (ID) and image ratio (IR). The transformation process which is the principal component analysis (PCA) is statistical technique that transforms the correlated data into uncorrelated data. The (PCA) are chosen so that the first Principal Component (PC) expresses the maximum amount of information. The rest (PCs) contain the information's which don't appear in the first (PC). Six bands data sets are taken from the landsat - 7 ETM (Enhanced Thematic Mapper). To determine the changes which occur in AL Ahwaz marsh in master city during 2000 and 2013. Different methods were used to study the changes which occur in this region the subtraction method which in (ID) and the ratioing method (IR) and the (PCA) method. Compain the (PCA) with (ID) and (IR) to produce the best way to detect the changes.The unsupervised classification process which is the modified (K - mean) is used to classify the changes occur in the marshal region and the area surrounding it. This type of classification depend on the color and distance between the classes, a hybrid methods which are the (ID) with the K - mean, (IR) with (K - mean) PCA of (ID) with the K - mean, PCA of (IR) with the K - mean and the (PCA with the K - mean) statistical features have been calculated for each method to find the changes which occur during the years. All these methods illustrated the changes which occur during these years.Results showed that the subtraction process is the best of the ratioing process in distinguish because of changes (PC1) Includes a 91.37% of the information and the process of ratioing gives 64% of the (PC1) of the proportion of the information in the bands used for the purpose of study.This thesis result for detecting the changes using PCA and the unsupervised classification which in K - mean using ENVI (Environment for Visualizing Images) and the MATLAB (short for MATrix LABoratory).

معالجة التربة الملوثة بالنفط الخام واستخدامه في انتاج مادة طلاء تقاوم التاكل من المواد الكيميائية == Treatment of Soil Contaminated with Crude Oil and Using it in Producing Corrosion Resisting Chemicals Coating

اسم المؤلف: مؤيد عبد الله محمد
اسم المشرف: عباس فاضل عيسى | محمد علي جابر
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: واسط
الصفحات الاولى:
المستخلص: تضمن البحث ثلاث محاور : - الاول تحضير خليط بوليمري مكون من (ايبوكسي - اسفلت) وبنسب (30% - 70%), (40% - 60%), (50% - 50%), (60% - 40%), (70% - 30%) واعتمد منها النسبه الافضل (50% - 50%) كاساس في الخليط البوليمري. في المحور الثاني تحضير خليط بوليمري مكون من (اسفلت - بولي ستايرين - ايبوكسي) وحسب النسب التاليه (50% - 0% - 50%), (50% - 10% - 40%), (50% - 20% - 30%), (50% - 30% - 20%), (50% - 40% - 10%), واعتمدت افضل نسبه مقاومه للحوامض الكيمياويه (50% - 20% - 30%) تتوازن فيها الخواص الميكانيكيه. اما المحور الثالث تحضير خليط بوليمري مكون من الايبوكسي والبولي اثيلين عالي الكثافه وبنسب ايبوكسي (5% - 10% - 15% - 20% - 25%)افضل نسبه هي 15% واعطت اعلى قوة شد موازيه للسطح مقدارها 14.4 ميكاباسكال. تم دراسة العديد من الخصائص الميكانيكيه من شد موازي للسطح وشد عمودي على السطح ومقاومة انحناء, حيث اضهرت النتائج ان النماذج المحضره من الخليط البوليمري (ايبوكسي - اسفلت) يمتلك افضل الخصائص الميكانيكيه في الضروف الاعتياديه مقارنه مع النماذج الاخرى كشد موازي للسطح (1.19 - 3.24 - 16.1 - 22.2 - 27.2) ميكاباسكال, وشد عمودي على السطح (1.76 - 2.84 - 4.25 - 6.75 - 8.87) ميكاباسكال, ومقاومة انحناء (26.8 - 3.94 - 7.47 - 8.5 - 11.5)ميكاباسكال. اظهرت النتائج ايضا ان النماذج المحضره من الخليط البوليمري (اسفلت - بولي ستايرين - ايبوكسي) يتمتع بمقاومه عاليه للحوامض الكيمياويه لكنها بينت في نفس الوقت ضعف في الخواص الميكانيكيه لذلك يجب ان تكون اضافة مادة البولي ستايرين بنسب محدده مساويه الى (10% - 20% - 30% - 40%).بالاضافه الى ذلك اظهرت النتائج ان هناك انخفاض بالخواص الميكانيكيه للنماذج المحضره من الخليط البوليمري (ايبوكسي - بولي اثيلين عالي الكثافه) كلمزاادت نسبة الايبوكسي وكانت قوة الشد الموازيه للسطح (9.9 - 11.1 - 12.5 - 14.4 - 11.7 - 10.9) ميكاباسكال وقوة الشد العموديه على السطح 17.5 - 15 - 13.5 - 9.5 - 6.69 - 3.35), اما مقاومة الانحناء تكون كبيره جدا تتجاوز الحد المطلوب. | The research consists of three routes : The first route is the preparation of polymer blend which contains (epoxy - asphalt) with proportions (30% - 70%), (40% - 60%), (50% - 50%), (60% - 40%), (70% - 30%), and depends on the best that is (50% - 50%) as a principal in polymer blend in the next dimension. The second route is the preparation of polymer blend contain (asphalt - polystyrene - epoxy) with proportions about (50% - 0% - 50%), (50% - 10% - 40%), (50% - 20% - 30%), (50% - 30% - 20%), (50% - 40% - 10%), and depends on the best resistant proportion to the chemical acids (50% - 20% - 30%) in which the mechanical properties are balanced. The third one is the preparation of polymer blend contains epoxy and high density polyethylene with proportions of epoxy as (5% - 10% - 15% - 20% - 25% ), the best is (15%) as a high parallel tensile strength of the surface 14.4 MPa. Most of the mechanical properties have been studied of the parallel tensile strength of the surface and the perpendicular tensile strength on the surface and bending resistance. The results showed that the prepared samples from the polymer blend (epoxy - asphalt) has the best mechanical properties in the familiar conditions compared as with the other samples as parallel tensile of the surface (1.19 - 3.24 - 16.1 - 22.2 - 27.2) MPa and a perpendicular tensile on the surface (1.76 - 2.84 - 4.25 - 6.75 - 8.87) MPa and bending resistance (26.8 - 3.49 - 7.47 - 8.5 - 11.5)MPa. The results also showed that the prepared samples from the polymer blend (asphalt - polystyrene - epoxy) which has a high resistance of the chemical acids but at the same time they showed a weakness in the mechanical properties. So, the addition of polystyrene material in specific proportion (10% - 20% - 30% - 40%). Moreover, the results showed that there was a decrease in the mechanical properties of the prepared samples of the polymer blend (epoxy - high density polyethylene), the proportion of epoxy increased, the parallel tensile strength of the surface (9.9 - 11.1 - 12.5 - 14.4 - 11.7 - 10.9)MPa and the perpendicular tensile strength on the surface (17.5 - 15 - 13.5 - 9.5 - 6.69 - 3.35) MPa, while the bending resistance largely exceeds the required limit.

تحليل التزامن لمنظومة اتصالات ضوئية تستخدم ليزر دايود معرض لتغذية ضوئية رجعية مزدوجة == Analysis of synchronization for an optical communication system using a laser diode subjected to double optical feedback

اسم المؤلف: منتظر جواد خضير الطائي
اسم المشرف: فراس صبيح محمد
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الالياف الضوئية
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ان ليزر اشباه الموصلات الخاضع للتغذية الضوئية الرجعية يمكن ان يولد اشارة فوضوية ذات ابعاد كبيرة تستخدم بتطبيقات الانتقال الامن للمعلومات في الاتصالات الضوئية. التغذية الضوئية الرجعية ممكن ان تسبب تغيرات كبيرة في خصائص الليزر، مثل تيار العتبة، والكفاءة التفاضلية، خرج الطاقة وخط الطيف.اضطراب ليزر اشباه الموصلات يوفر تقنية مفيدة جدا ، ما يسمى الاتصالات الفوضوية. والفكرة هي ببساطة تحميل (ترميز) الرسالة المرسلة على الموجة الفوضوية واستخراجها حين وصولها الى (المستلم) اذا حصل التزامن بينه وبين (المرسل). في رسالة الماجستير هذه ، نقوم بدراسة السلوك الديناميكي غير الخطي في ليزر اشباه الموصلات ذي التكوين (المسيطر - التابع) في منظومات الاتصالات الامنة. سيتم تحقيق الهدف من هذا البحث عن طريق دراسة نوعية تزامن منظومات ليزر اشباه الموصلات ذات الحلقة - المفتوحة والحلقة - المغلقة, من خلال تقييم تاثير المعاملات المؤثرة على هذه المنظومات, مثل زمن التغذية الضوئية الرجعية , زمن الحقن الضوئي, وقوتي التغذية الضوئية الرجعية والحقن الضوئي.تم دراسة تاثير قوة التغذية الضوئية الرجعية المزدوجة والحقن الضوئي في منظومة الحلقة المفتوحة. وقد اظهرت النتائج عدم الترابط او الترابط الجزئي بين الليزران لاغلب القيم, كما تصبح خريطة التزامن بشكل سحابة نقطية (عدم وجود ارتباط بين خرجي اليزر المسيطروالتابع) او خط تزامن متقطع. لكن يمكن ان مشاهدة نوعية التزامن الممتازة بشكل واضح عندما تكون قيم العوامل المؤثرة ( kf = 0.14 وkinj =0.28) وتثبيت قيم τf ) وτ ) عند (1ns) . في حين ان تاثير تغير قيم τf ) وτ ) في منظومة الحلقة - المفتوحة اظهر ان ا افضل نتيجة حصلنا عليها كانت عند (kf = 0.14 , ( kinj =0.28 و) τf ,τ =1.6 ns (. حيث ظهر خط تزامن مستمر تقريبا مع غيمة من نقاط قليلة متفرقة ووجود اختلاف قليل في كثافة الحاملات لليزر المرسل والمستلم. النتائج الحسابية اظهرت ان المنظومة الضوئية يمكن ان تكون اكثر استقرارا من خلال استخدام الليزر المستلم مع نظام التغذية الضوئية الرجعية ذي الحلقة - المغلقة من خلال ظهور خطوط تزامن مستمرة وتطابق كثافة الحاملات لليزر المرسل والمستلم . وهذا يدل على امكانية تحسين نوعية التزامن باستخدام التغذية الضوئية الرجعية مع كلا الليزران المرسل والمستلم. من ناحية المنظور التطبيقي للاتصالات الفوضوية المشفرة تعد النتائج التي حصلنا عليها مهمة لتحديد ظروف التشغيل الافضل وتقييم محددات اداء منظومات التغذية الضوئية الرجعية التي تعتمد على ترابط التزامن بين الليزران. | In semiconductor lasers, chaos has offered a very useful technology, the so - called chaotic communication. The idea is simply to carry (encode) the transmitted message on a chaotic waveform and decode it on the receiver if the latter is synchronized to the transmitter .The aim of this work is to be achieved by numerical study of the synchronization quality of open - loop and close - loop Semiconductor Laser systems through assessing the effect of the variable parameters that affect these systems. Such as, optical feedback time( τ ), optical injection time (τf) optical feedback strength( kf ) and optical injection strength (king) The effect of optical injection and double optical feedback strength in open - loop system are studied. The results show the two lasers are decoupled or partially coupled for the most values as the synchronization map becomes a cloud of points (no correlation between master laser ( ML) and slave laser (SL) outputs) or discrete diagonal line. But, It can be clearly seen excellent synchronization quality when (kf = 0.14and kinj =0.28) while keeping (τ and τf ) fixed at (1ns). While under the the effect of varing τ and τf in open - loop scheme. The best result was when kf = 0.14, kinj = 0.28,  =2 ns and f = 2 ns that shows semi - continuous diagonal line accompany with a few cloud of points and short mismatch in the carriers density correlation for the transmitter and receiver. The numerical results have founds that the system can be more stabilized by utilized a feedback loop at the slave diode in close - loop system. It is evident that the synchronization quality improves by using feedback loop on both lasers. From the perspective of applications in chaos communications and cryptography, our results will be helpful to determine optimal operating conditions and estimate performance limitations of optical feedback schemes based on synchronization of coupled lasers

دراسة خصائص الحزمة الالكترونية على صور التاثير المراتي == Investigation of the Electron Beam characteristics on the Mirror Effect Images

اسم المؤلف: مصطفى محيسن عبد
اسم المشرف: حسن نوري عبد الوهاب العبيدي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: فيزياء الالكترونيات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: اجريت دراسة نظرية بمساعدة الحاسوب لوصف سلوك الكترون معجل نحو عينة عازلة مشحونة لانتاج صور المراة الالكترونية. حيث تم تقديم معالجة رياضية بسيطة لسلوك الالكترون الماسح بدلالة جهد الحزمة وجهد النموذج. ان معادلة الحركة للالكترون الساقط راسيا اشتقت بدلالة قانون حفظ الطاقة. تكمن اهمية الاشتقاق الرياضي في كونه يربط معلمات حزمة المسح من جانب بمعلمات التشعيع من اخر. تم الوصول الى هذا المنجز من خلال تبني انموذجي الشحنة النقطية والقرص المشحون. اظهرت النتائج بان فهم وتفسير جيد لسلوك الالكترون الماسح الفيزيائي يمكن استخلاصه. بناء على ذلك فان تاثير قطر وتيار الحزمة جهد المسح مسافة التشغيل، الشحنة المتراكمة وابعاد المنطقة المشععة على صور مراة الالكترون بالامكان تحديدها. النتائج اظهرت بوضوح ان تيار الحزمة الالكترونية له تاثير كبير على الصور المر اتية المنتجة بالمقارنة مع معلمات الحزمة الاخرى. وتبين ان تيار الحزمة يمكن ان يستخدم بالتحكم بصور المراة فقط عند القيم الدنيا من جهد المسح. علاوة على ذلك اظهرت المعالجة المستخدمة في هذا العمل القدرة على انتاج وسيلة لحساب الشحنة المتراكمة. وبينت نتائج هذه الطريقة اتفاق ممتاز مع بعض النتائج التي تم نشرها. | A computer - aided theoretical investigation is conducted to describe the behavior of an accelerated probing electron oriented toward a charged insulator sample and hence producing electron mirror images. A simple mathematical manipulation for the scanning electron behavior in terms of the beam and surface potentials is presented. The equation of motion of this head - incident electron is derived in terms of the energy conservation law. The importance of the derived expression is that it has relating scanning beam parameters, on the one hand, and the parameters of the irradiation on the other hand. This obligation has achieved through adopting of the disc and point charged models. Results have shown that best comprehend and interpret for the physical behaviors of a scanning electron can be extracted. Hence the influence of a beam (size and current), scanning potential, working distance, trapped charge and dimension of the irradiated area on the electron mirror images are defined. The results have clearly shown that the electron beam current has a considerable effect on the deduced mirror images in comparison with the other beam parameters. It is found that the beam current may be used to control mirror images only in the lower values of scanning potential. Furthermore, the introduced manipulation shows an ability to produce a method for calculating the trapped charge. However, the result of this method shows an excellent agreement with some of the published experimental one

تحضير ودراسة متراكبات بوليمرية مدعمة من نوع PMMA/Graphene وPMMA/ZnO النانوية == Preparation and Studying of Polymeric Reinforced Composites Type PMMA/Graphene and PMMA/ZnO Nanoparticles

اسم المؤلف: مصطفى عبد الكريم جهاد الاوجي
اسم المشرف: تغريد مسلم مريوش الساعدي
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم تحضير مساحيق نانوية بطريقة هامر وطريقة الصول - جل , اذ تم تحضير رقائق الكرافين باختزال اوكسيد الكرافين المحضر بطريقة هامر باستعمال مسحوق وقضبان الكرافيت , بينما حضر اوكسيد الزنك النانوي بطريقة الصول - جل . كما تم تحضير متراكبات بوليمرية نانوية بهياة اغشية سميكة بسمك نحو (0.206mm) وبهياة (Bulk) بطريقة الخلط والصب اليدوي (Hand lay - up) باستعمال راتنج بولي ميثيل ميثاكرليت (PMMA) كمادة اساس ورقائق الكرافين او اوكسيد الزنك كمادة تدعيم وبنسب وزنية (0.1,0.3,0.5,1,2)% .تم اجراء الفحوص التشخيصية للمساحيق النانوية والاغشية النقية والمدعمة باستخدام تقنيات (XRD,SEM,EDX,DLS) . اظهرت نتائج قياسات حيود الاشعة السينية ان جميع المساحيق النانوية المحضرة ذات تركيب بلوري متعدد التبلور ومن النوع السداسي , واظهرت انماط حيود الاشعة السينية ذروتين بالنسبة لاوكسيد ورقائق الكرافين بالمدى الزاوي (5 - 70)ᵒ للسطح (001) لاوكسيد الكرافين و(002) , (100) لرقائق الكرافين , بينما اوكسيد الزنك اذ ظهرت له ثمان ذروات عند المدى الزاوي (20 - 80)ᵒ للسطوح الثلاثة الاكثر شدة هي (100),(002),(101), كما اظهرت نتائج الحيود ان للاغشية النقية والمدعمة هيمنة الاتجاه (002) بالنسبة للاغشية المدعمة برقائق الكرافين ، بينما يهيمن الاتجاه (100) بالنسبة لاغشية المدعمة باوكسيد الزنك النانوي , كما اظهرت حسابات الحجم الحبيبي ان هناك تناقصا واضحا بزيادة نسب التدعيم .اوضحت نتائج فحوصات (DLS) ان الحجم الحبيبي لرقائق الكرافين كان بحدود 200nm , بينما كان الحجم لاوكسيد الكرافين 20nm واوكسيد الزنك بحدود 15.8nm , اما صور (SEM) فقد اظهرت اوكسيد الكرافين بشكل تكتل زغبي بينما الكرافين بشكل رقائق او صفائح اما اوكسيد الزنك بشكل شبه كروي وقضبان نانوية ذات اطوال مختلفة . اما بالنسبة لفحص (EDX) فقد ظهرت قمة عالية للكاربون عند (1.8 KeV) لمسحوق الكرافين واوكسيد الكرافين كما ظهرت قمة للاوكسجين (0.53KeV) تعود لاوكسيد الكرافين , اما اوكسيد الزنك فقد اظهر قمة عالية عند (1.1KeV) تعود للزنك وقمة عند (0.53KeV) تعود للاوكسجين .كما تضمن البحث دراسة الخواص البصرية للاغشية المحضرة منها قيمة فجوة الطاقة البصرية للانتقالات الالكترونية المباشرة المسموحة , وكذلك تم حساب معامل الامتصاص والانعكاسية ودراستها من خلال طيفي الامتصاصية والنفاذية ضمن مدى الاطوال الموجية (300 - 1100)nm , واظهرت النتائج ان قيم فجوة الطاقة البصرية تقل مع زيادة نسب التدعيم بالنسبة للكرافين واوكسيد الزنك ZnO.شملت نتائج القياسات البصرية ايضا حساب الثوابت البصرية المتمثلة (معامل الانكسار , ومعامل الخمود , وثابت العزل الكهربائي بجزايه الحقيقي والخيالي ) , ووجد ان هناك زيادة في قيم معامل الخمود ومعامل الانكسار بزيادة نسبة التدعيم .كما تم دراسة الخواص الحرارية والميكانيكية للمتراكب البوليمري المدعم بالمواد النانوية , ولوحظ ان الصلادة ودرجة الانتقال الزجاجي تزدادان بزيادة نسبة التدعيم . | In this study , nanopowders prepared by using Hummer's and Sol - Gel methods , Graphene was prepared by Hummer's method using graphite powder and rods graphite , while zinc oxide was prepared using Sol - Gel method. Nanocomposites were prepared in form of thick films with thickness (0.206)mm and (Bulk) by blend and (Hand lay - up) methods using resin (PMMA) as a matrix and graphene flakes or zinc oxide as reinforced materials . The nanopowders , pure and reinforced films were characterized by using the techniques (XRD,SEM,EDX,DLS) , the results of XRD exhibit in the angular range (5 - 70)ᵒ grahene oxide with surface (001) while graphene flakes have two peaks in (002) and (100) , zinc oxide in angular range (20 - 80)ᵒ exhibits eight peaks with three high intensity surfaces (101) , (002) and (100). While XRD results showed the pure and reinforced films with dominance of (002) surface in films reinforced by flakes and dominance of (100) surface in films reinforced by nano zinc oxide . DLS test showed that the particles size of graphene flakes is in the range 200nm and graphne oxide is in 20nm while zinc oxide is 15.8nm . SEM images showed graphen oxide has the form of agglomerated and graphene like flakes or plates while ZnO has semispherical and nanorods form with different lengths. EDX test showed that all powders have strong peaks , high carbon peak exhibits at (1.8KeV) while zinc exhibits at (1.1 KeV) with oxygen peak at (0.53KeV) for both graphene oxide and ZnO , and we saw other small peaks represent impurities with small weight percentages that exhibited during the preparation . Optical properties was studied for preparing thick films from absorptance and transmittance spectrum for the range (300 - 1100)nm. Results showed the energy gap is decreased by the increase of the concentration of reinforced material , the reflectance and the absorption coefficient were calculated by this spectrum .And we calculated other optical constants like refractive index, extinction coefficient and dielectric constant in its two parts .Also we saw the extinction coefficient and refractive index increase with the increase of the concentration.This work included thermal and mechanical properties. The results showed the hardness and the degree of glass transition which increased with the increase of the concentration .

نماء وميزات بلورات K2SO4 المطعمة بايونات النحاس Cu+2والحديدFe+2 == Crystal Growth and Characterization of Doping K2SO4with Copper Cu+2and Ferrite Fe+2 ions

اسم المؤلف: مريم عيسى فيصل
اسم المشرف: طارق عبد الرضا علوان الظاهر
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: نماء بلورات احادية لكبريتات البوتاسيوم النقية والمطعمة بايون النحاس (Cu+2) وايون الحديد (Fe+2) الناتجة عن كبريتات البوتاسيوم K2SO4 بوصفها مادة اساس وباضافات محددة من كبريتات النحاس CuSO4.5H2O وكبريتات الحديدوز FeSO4.7H2O بنسب وزنية (1% ,2% ,3% ,5%)بوساطة تقنية التبخر البطيء للمحلول المائي في درجة حرارة الغرفة لكونها سهلة وتعطي نتائج ذات جودة مقبولة , وبمولاريةM=1 وبابعاد (9x3x2)mm3 لبلورة K2SO4 النقية وبابعاد (28x18x4)mm3 بعد اعادة التبلور , ودراسة اثر التطعيم في النماء البلوري والخصائص التركيبية , ففي حالة التطعيم بكبريتات النحاس اذ كانت ابعاد اكبر بلورة بعد اعادة التبلور عند التطعيم بنسبة 3% ,2%)) وهي (14x12x9) mm3 (12x11x12)mm3 على التوالي , اما في حالة التطعيم بكبريتات الحديدوز المائية كانت ابعاد اكبر بلورة بعد اعادة التبلور هي في النسبة 3%, اذ اظهرت الدراسة اهمية اعادة نماء البلورات لمرة اولى وثانية ومدى تحسن الخصائص البلورية الناتجة عن هذه العملية من حيث النقاوة والحجم والهيئة , فنلاحظ ان المادة في الحالة النقية تكون اكبر حجما بالابعاد , وتم التاكد من التركيب البلوري للبلورة النقية , وللبلورات المطعمة اعتمادا على مخططات حيود الشعاع السيني وتحليل بنية البلورات بوساطة مقياس حيود الاشعة السينية للمسحوق واستخدام تصفية ريتفيلد لحساب معلمات خلية الوحدة unit cell وثوابت الشبيكة للبلورات المنماة. تمتلك بلورة K2SO4 النقية قبل التطعيم النظام البلوري المعيني المتعامد المحاور (Orthorhombic) وثوابت خلية الوحدة المطابقة تقريبا لبطاقة JCPDSوالدراسات السابقة , اما للبلورات المطعمة تشير مخططات XRDالى تعرضها لبعض التغيرات في البناء البلوري وتحول النظام من المعيني المتعامد المحاور الى احادي الميل (Monoclinic) في حالة التطعيم بالنحاس بنسبتي 2% ,3% , ودراسة الانماط الاهتزازية للبلورات المنماة بتقنية FTIR اذ نلاحظ حدوث امتصاص للحزمة العريضة عند القيمة 1097 cm - 1 للبلورة النقية K2SO4 والمطعمة بتزحزح قليل يتراوح بين 3 ± عن قيمة العدد الموجي في الحالة النقية وهو ما يميز انماط الاهتزاز للمجموعة الكبريتية , واخيرا درست الانتقالات الطورية من اختبار مسعرية المسح التفاضلي DSC اذ لوحظ تغير الطور لبلورة K2SO4 في درجة الحرارة 581˚C اما العينات المطعمة فنلاحظ حدوث تزحزح بمقدار ±2 عن العينة النقية , وحساب السعة الحرارية لهذه البلورات من مخططات اختبار DSC . | Single Crystal of Pure and Cu+2 , Fe+2 doped potassium sulfate a rising from potassium sulfate as a material basis and additions specific of copper sulfate CuSO4.5H2O and ferrous sulfate FeSO4.7H2O proportions by weight (1% ,2% ,3% ,5% ) were grown from aqueous solutions by the slow evaporation technique at room temperature, for easy being and give acceptable quality results with Normality M=1 , with dimension of (11x9x4) mm3(9x3x2) mm3 and dimensions (28x18x4) mm3 after re - crystallization to crystallize pure K2SO4 , and study The influence of doping on crystal growth and synthetic properties crystalline, after doping ,in the case of doping of copper sulfate it was the biggest dimensions of crystal doped by 3% 2% after re - crystallization was (14x12x9)mm3 (12x11x12)mm3, respectively , also in the case of dopants ferrous sulfate was larger dimensions crystal after re - crystallization at in the ratio of 3% , as the study showed the importance of re - crystallization of crystals - time first and second and the extent of improvement in characteristics of crystalline resulting from this process in terms of purity, size and body , We note that the Crystal in the pure case be larger dimensions, Structure analysis of the grown crystals were obtained and confirmed by X - Ray powder diffraction measurements. The diffraction patterns were analyzed by the Rietveld refinement method to calculate the unit cell parameters of these crystals , XRD measurements show the crystal system of orthorhombic, Space group (Pnma) and constants of the unit cell, the agreement to the card JCPDS and previous studies, XRD schemes indicate to occur some of the changes in the construction of crystal Structure for dopant crystal and transformation from Orthorhombic to Monoclinic system at the case of dopante copper 2%, 3%, and study the vibrational patterns for the grown crystals by technology FTIR , where we note the occur uptake of broadband at the value of number wave 1097 cm - 1 for pure Crystal K2SO4 , and dopants Crystals occur few Shift about 3 ± from the value of the wave number from the pure case. It was that distinguishes the vibration patterns of the group sulfur, finally studied phase transitions by test Calorimetry differential scanning DSC , a change phase was observed to crystal K2SO4 at temperature 581˚C and dopants Crystals we note the occur Shift about ± 2 for the pure sample , calculate the heat capacity for these Crystal from DSC analysis schemes.

دراسة الخصائص الطيفية لجزيئة 9,10 - دايفينيل انثراسين == Study of Spectroscopic Properties of 9, 10 - Diphenyle anthracene Molecule

اسم المؤلف: مروة محمد جاسم
اسم المشرف: زياد عدنان صالح
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا العمل، تم قياس ودراسة الخصائص الطيفية للمحاليل التي تشمل اطياف الامتصاص والفلورة لمركب (9,10 - دايفينيل انثراسين DPA) المذاب في عدد من المذيبات القطبية وغير القطبية عند الطول المجي المهيج (λex=365 nm), كما تم حساب الكفاءة الكميه وزمن العمر. واستخدم تركيز مخفف لغرض التقليل من ظاهرة الامتصاص الذاتي. وان المذيبات المستخدمة لاذابة DPA)) هي (السايكلوهكسان , 1, 4 - ديوكسان ,البنزين, الايثانول وثنائي ميثيل سلفوكسيد) مع ثوابت عازل (47.2, 24.3 ,2.27 ,2.21,2.02) على التوالي. حيث وجد ان الكفاءة الكمية لمحلول DPA في السايكلوهكسان ,4 - 1 ديوكسان والبنزين عند التركيز [1×10 - 5M] تساوي (qFM =0.956)، ( (qFM = 0.952 و(qFM= 0.947) على التوالي. ولكن عند حساب الكفاءة الكمية لمحلول DPA في الايثانول، والثنائي ميثيل سلفوكسايد وجدت انها تساوي(qFM= 0.904) و(qFM= 0.88) . ان هذا الاختلاف في قيمة الكفاءة الكمية يرجع الى قطبية المذيب.اظهرت زيادة في زمن العمر الاشعاعي مع زيادة قطبية المذيب . كما لوحظ ان هناك ازاحة لطيف الفلورة باتجاه منطقة الطول الموجي الطويل (ازاحه حمراء) وانخفاض في شدة الفلوره مع زيادة قطبيه المذيب. وقد تم حساب معدل العمليات الاشعاعي (KFM)، واللااشعاعي (KIM) وازاحة ستوك. كل القياسات تمت في درجة حرارة الغرفة. من جهة اخرى, تظهر هذه الدراسة الخصائص التركيبية والبصرية والكهربائية للاغشية الرقيقة لل DPA النقي والمشوب بالانثراسين عند نسب تشويب(20,15,10,5)=x % والمحضرة بطريقة الرش الكيميائي الحراري على الواح من الكوارتز والزجاج على حد سواء وبتركيز مولاري [1*10 - 2 M]. تشير نتائج فحوصات الاشعة السينية (XRD) الى ان اغشية DPA النقي والمشوب بالانثراسين ذات طبيعة تركيبية متعددة التبلور. اشتملت دراسة الخواص البصرية لاغشية DPA النقي والمشوب بالانثراسين على قياسات طيفي الفلورة والامتصاص ولمدى اطوال موجية (300 - 650nm), حيث لوحظ نقصان في قيمه فجوة الطاقة البصرية مع زيادة معدل التشويب. ان الخصائص الكهربائية لاغشية DPA النقي والمشوب بالانثراسين قد تمت دراستها.ولهذه الاغشية طاقتي تنشيط ضمن المدى الحراري (35 - 155 °C) .ولكل طاقة تنشيط ميكانيكية توصيل مختلفة التي يمكن تفسيرها بالاعتماد على نظرية الحزم لشبه الموصل. اثبتت قياسات تاثير هول ان اغشية DPA النقي والمشوب بالانثراسين عند نسب تشويب مختلفة هي اشباه موصلات عضوية من النوع الموجب (p - type). | In the present work, the spectroscopic properties which includes the absorption and fluorescence spectra of solutions for compound (9, 10 - Diphenylanthracene) dissolved in polar solvents and non - polar solvents at excitation wavelength (λex=365 nm) had been measured and investigated .The quantum yield and lifetime were calculated. Diluted solutions were used to eliminate the effect of self - absorption phenomena. The solvents which were used to dissolve DPA are (cyclohexane, 1, 4 - dioxane, benzene, ethanol, and dimethylsulfoxide) with dielectric constants (2.02, 2.21, 2.27, 24.3, 47.2) respectively. It is found the quantum yield of solution DPA in cyclohexane, 1, 4 - dioxane and benzene at concentration [1×10 - 5M] is equal to (qFM= 0.956), (qFM= 0.952) and (qFM= 0.947) respectively. But the calculated quantum yield of solution DPA in ethanol, and dimethylsulfoxide were found (qFM= 0.904) and (qFM= 0.88). This difference in the values of quantum yield is due to the solvent polarity. The results showed an increase in the radiative lifetime with increasing of solvent polarity. Also, a shift in the fluorescence spectra toward long wavelength region (red shift) and decreased the intensity with increase of the polar solvents had been noticed. The rate parameter of radiative (KFM), non - radiative (KIM) and Stoke shift were calculated. All measurements were at room temperature. On the other hand, this study shows the structure, optical and electrical properties of DPA pure and dopant anthracene thin films with doping ratios x=(5,10,15,20)% were prepared by chemical spray pyrolysis technique, which deposited on glass and quartz substrate ,are both which have been used at molarity concentration [1*10 - 2 M]. The results of examinations X - ray (XRD) indicate that the DPA pure and dopant anthracene films are polycrystalline in nature structure. Optical properties measurements are include fluorescence and absorption spectra in the wavelength range (300 - 650nm), the optical energy band gap of pure DPA and dopant anthracene films are observed they are decreasing with increasing rate doping. Electrical properties of DPA pure and dopant anthracene films have been studied. These films have two activation energies (Ea) within range thermal (35 - 155 °C).Each activation energy has different mechanical connecting which could be interpreted by relying on the bands theory of semiconductor. Also, the Hall Effect measurements prove that pure DPA and dopant anthracene thin films are p - type organic semiconductor

التحليل الاحصائي لخصائص الصور الرقميه لامراض الرئة باستخدام الاشعه السينيه == Statistical Features Analysis of Lung Disease in Chest X - ray Images

اسم المؤلف: مروة عبد المجيد عزيز
اسم المشرف: صباح نوري مزهر
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: معالجة الصور
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يعتبر الكشف المبكر عن امراض الرئة وخاصة مرض السرطان يعتبر من المشاكل الكبيره لان تركيبه الخلايا السرطانية والتركيبات الفسيولوجية لها معقدة ومن الصعب تشخيصها بسبب التركيبة المعقدة للرئة لانها تتكون من عدة فصوص وبمساعدة التقنيات الحديثة مثل الاشعة السينية والتقنيات الرقمية اصبحت عملية الكشف المبكر عن امراض الرئة اسهل واقل تعقيد.تحتوي صور الاشعة السينية على ضوضاء وذلك لاحتوائها على عظام القفص الصدري وكذلك عظام القص بالاضافة الى ان الاشخاص يرتدون بعض الملابس التي تظهر بالتصوير مما يشكل عقبة كبيرة في تمييز الامراض وخاصة الاورام. لقد تم الاستعانه بنظام برمجي يعتمد على معالجه الصور الرقميه وتحليل الانسجه لغرض اعطاء افضل النتائج في تمييز امراض الرئه ومن الجدير بالذكر ان الصور التي تم التعامل معها ماخوذة من مستشفى دبي بالامارات ومعهد الاشعة في باب المعظم .تم في هذا البحث تطوير خوارزمية لغرض التخلص من عظام القفص الصدري والقص وكذلك الضوضاء باستخدام التقنيات الرقمية الحديثة حيث استخدمت طريقتان الاولى لم تعط النتائج المطلوبة والثانية اعطت نتائج جيدة وبمساعدة عملية التعتيب (Thresholding) تم فرز المرض ( الورم ) .استخدمت طريقة تحسين الصور بالاعتماد على بعض المرشحات بالاضافة الى طريقة الكشف عن الحواف . لقد قسمت الرئة الى جزئيين علوي وسفلي وتمت المقارنة بينهما من خلال حساب الخصائص الاحصائية التي تم استخراجها من احد طرق التحليل النسيجي وهي First order ) ) .وعند تشخيص المنطقة التي تحتوي على الورم يتم دراسة نسيجها وتحليله بالطرق الاحصائية . ايضا تم استخدام طريقة حساب الخصائص الهندسية والتي تعطي معلومات حول انتظامية شكل الورم .كل مرض بالرئة ياخذ شكل معين وحساب الانتظامية يسهل عملية تشخيص المرض او الورم.واخيرا تم استخدام طريقة قوانين الاقنعة التي لفت مع الصورة ومعها استخدمنا طريقة التجزئة الملونة ( Watershed) حيث اظهرت عملية المزج هذه نتائج جيدة لفرز نسيج الورم عن نسيج الرئة السليم.اظهرت الدراسة تطابق بين النتائج المستخرجة وتشخيص الطبيب الاختصاصي. | The early detection of lung disease, especially lung cancer is a difficult problem, because of the structure of the cancer cells or other pathological. The cells are difficult to be diagnosed and identified, because the complex structure of the lungs. With the help of the detectors and the x - ray images, the detection of the lung disease become easier, but the x - ray images contain noise and the rips appear in the images, which forms an obstacle in showing the infection in the lung. A computerized system that depends on the digital image processing with the textural analysis produced a good way to detect the lung disease. Two ways have been implemented to detect the diseases, one of them failed but the other gives good result to segment the tumor.The statistical and geometrical feature has been accounted for the normal part and abnormal. In this study the segmentation process (tumors and diseases) since its tissue differed from the normal part of the lung our test samples were taking form hospital in the United Arab Emirates and the institute of radiology (Medical city). The first order textural analysis has been used for lung texture analysis with the help of Enhancement and edge detection methods. The geometrical parameters have obtained. These parameters help to give the specific area and shape of the tumor or cancer, which helps the radiologist to give the right amount of radiation therapy without affecting the normal parts. Also, the low mask which is a statistical texture analysis used with the color segmentation method (watershed) to detecting the tumor and analyzing its texture. Finally, the statistical and geometrical features with the help of the segmentation method produce a good way for the detection of the lung disease and to give the specific treatment.

تصنيع كاشف من انابيب الكاربون النانوية لليزر الاشعة تحت الحمراء == Fabrication of Carbon Nanotubes Detector for IR Laser

اسم المؤلف: مروة عبد الرحمن داود
اسم المشرف: سمر يونس طه | وسن رشيد صالح
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الدراسة تم تصنيع كاشف يعمل في منطقه الاشعة تحت الحمراء البعيدة وبدرجة حرارة الغرفة باستخدام اربع انواع من انابيب الكاربون النانوية متعددة الجدران. (MWCNTs, COOH - MWCNTs, short - MWCNTs and DWCNTs) .انابيب الكاربون النانويه رسبت بتقنيه (dip coating) و((drop casting لتحضير اغشية انابيب الكاربون النانوية متعدد الجدران على قاعده سليكون مسامي من نوع n و. p تم تبخير اقطاب الالمنيوم على اغشيه انابيب الكاربون النانوية لتصنيع كاشف يعمل في منطقه الاشعة تحت الحمراء البعيده. تم دراسه الخواص التركيبيه والطبوغرافية والبصريه وحسابات هول لهذه الاغشيه المصنعة . تم فحص الخواص التركيبه لغشاءMWCNTs باستخدام حيود الاشعه السينيه (XRD) واظهرت النتائج ان له تركيب متعدد االتبلور وشكله سداسي والغالب كان باتجاه (002). مجهر القوة الذري ((AFM تم فية التركيز على تشخيص خواص السليكون المسامي مع انابيب الكاربون النانوية متعددة الجدران. وجد ان الفلم له توزيع سطح متجانس مما يشير الى التوزيع الجيد لانابيب الكاربون النانوية فوق النتؤات النانوية للسليكون. تم تعين معدل الحجم الحبيبي وكانت بحدود 87.05 nm . المجهر الالكتروني الماسح (SEM)استخدم لدراسة طوبوغرافية اغشيه انابيب الكاربون النانوية متعددة الجدران ووجد ان هذه الاغشيه متجانسة ولاتوجد فيها اية تكتلات او شقوق .فجوة الطاقه البصرية في المنطقة تحت الحمراء تم ايجادها من فحص FTIR وكانت فجوة الطاقة0.12 eV. دراسة طيف رامان ولانابيب الكاربون النانوية متعددة الجدران, بينت ان الطيف يتحدد بثلاثة انواع من الحزم D وG وPRM .وجدن الخط (D) وجد انه يقع عند 1561.62 cm - 1 والتي تشير الى عدم الانتظام بسبب العيوب وتقوس لشبيكه انابيب الكاربون متعددة الجدران بينما الخط (G) يقع بحدود 1750 cm - 1 ويكون نتيجه اهتزازات في اواصر C - C الخط الثالث PRMكانت تقع عن2700 cm - 1, هذه الحزم ممكن استخدامها لتقدير اي عيوب في الكاربون. نسبه الشدة D/G تساوي 1.135 . مطياف الاشعه تحت الحمراء استخدم لدراسة طيف انابيب الكاربون النانوية وللبوليمر والصبغة وظهرت امتصاصية جيده لانابيب الكاربون النانوية عند الطول الموجي 10.6 µm والذي يقع ضمن منطقة تحت الحمراء البعيدة ممايجعلها اختيار جيد لتطبيقات الاشعة تحت الحمراء. اظهرت قياسات تاثير هول ان انابيب الكاربون متعدد الجدران المرسبة على قاعدة السليكون المسامي هي من نوع شبه الموصل الموجب p - type)) ولها توصلية عالية. خصائص التيار - فولتيه واستجابيه الكاشف المصنع قيست عند الظلام والاضاءة لهذه الاغشيه بواسطه التشعيع بليزر ثاني اوكسيد الكاربون بطول موجي 10.6µm وبقدرة 2.5 W و2.2 . استجابية وخصائص كاشف التوصيل الضوئي تم تحسينها عن طريق تغطية افلام انابيب الكاربون النانوية متعدد الجدران بطبقة سمكها0.1mm من البوليمرات polyanilin وpoly methyl acrylae وبالاضافة الى صبغة methylene blue هذه الانواع من البوليمرات المطعمة بالصبغه تعتبر كمعالجة سطحية لغشاء الكاشف والتي تزيد بشدة من الاستجابيه الضوئيه لكاشف اشعه تحت الحمراء البعيدة.خصائص الكاشف (الكشفيه , الربح ,الاستجابه , القدره المكافئه للضوضاء ) حسبت قبل وبعد عملية الطلاء بالبوليمر ووجد ان الربح يزداد بحدود 25 مره اكثر من النماذج غير المطعمة .بينما الكشفيه ازدادت من (cm.Hz^1/2)/W 107 الى 1011(cm.Hz^1/2)/W بعد طلائها بالبوليمر .النتائج اظهرت ان الاستجابيه تزداد اكثر من الاستجابيه لاغشيه الكاربون النانوية غيرالمطعمه وتصل الى 0.0177 A/W لنوع انابيب الكاربون متعدد الجدران من نوع شبه الموصل السالب المحضر بطريقه (drop by drop ) وبينما اعلى الكشفية النوعيه بعد اضافه البوليمرات المطعمه بالصبغه كانت 7.08*1011 (cm.Hz^1/2)/W في حالة انابيب الكاربون متعدد الجدران لنوع شبه موصل السالب محضر بطريقه (dip coating) .هذه القيم تعطي اثبات لتاثير البوليمر في تحسين خصائص كاشف التوصيل الضوئي الاشعة تحت الحمراء البعيدة تم التحقق من تاثير تغطية اوتطعيم افلام انابيب الكاربون النانوية بالبوليمر على زمن الاستجابة الكاشف ووجد ان زمن النهوض كان 1.42ms , زمن الاستجابية كان 2.14ms بينمزامن الهبوط كان 3.92ms . | In this study the infrared photoconductive detectors works at far infrared region and at room temperature were fabricated. The detector fabricated using four types of carbon nanotubes CNTs (MWCNTs, COOH - MWCNTs, short - MWCNTs and DWCNTs).The carbon nontubes suspension is deposited by dip coating and drop - casting techniques to prepare thin films of CNTs. These films are grown on porous silicon (PSi) substrates of n - type and p - type Si. The aluminum electrodes were evaporated on the CNTs film to fabricate the far IR detectors.The structural, morphological, optical properties and Hall measurements of the film were studied. The structure of the MWCNTs film is examined by X - ray diffraction (XRD) and found to be polycrystalline of hexagonal structure with strong orientation at (002). The AFM studies are focused on the characterization of the PSi - CNTs and found it had a good and uniform surface homegensity which gives a good indicator for formation of the MWCNTs over the nanospikes of Si. The average particle size was determined and found to be 87.05 nm. The scanning electron microscope (SEM) technique has been applied to study the morphology of the deposited MWCNTs film. The results shows that the film are homogeneous and does not have areas with clusters or cracks.The optical energy gap in the IR region was calculated from FTIR spectrum and found to be 0.12 eV. From Raman shift spectrum for the MWCNTs, it was found that the spectrum is dominated by three typical lines; D - band, and G - band, and RPM band. The D - line is located about 1561.62 cm - 1 which assigned to the disorder induced by defects and curvature in the nanotube lattice, while G - line is located about 1750 cm - 1 due to the in - plane vibration of the C - C bonds. The RPM band is located at 2700 cm - 1 . These bands can be used to evaluate the extent of any carbon - containing defects. The D/G intensity ratio was 1.135. FTIR spectrophotometer was used to study the infrared spectrum of CNTs, polymers and Methylene Blue dye, which appear that CNTs have good absorbance in the wavelength of 10.6 µm. This is mean that these materials are very good candidate for IR applications. Hall Effect measurements show that the carbon nanotubes deposited on porous silicon substrate has a p - type semiconductor behavior and high conductivity. The I - V characteristics and the photoresponsivity of the fabricated detector are measured at dark and under illumination for CNTs film by IR radiation from CO2 laser of 10.6µm wavelength and power of 2.2 and 2.5W. The photoresponse and figures of merit of the photoconductive detector is improved by coating (functionalized) the CNTs films with layer of 0.1 mm of the blend polyaniline, polymethylmeth acrylate and methylene blue dye. This type of polymer coating can be considered as a surface treatment of the detector film, which highly increases the photoresponse and specific detectivity of the fabricated CNTs IR detector. The figure of mertis (Rλ, G, NEP and D*) were calculated before and after functionalization process. It is found that is increased in about 25 time than that for uncoated samples, while the specific detectivity was increased from order of 10+7 (cm.Hz1/2)/W to 10+11 (cm.Hz1/2)/W after coated with polymer.These values give an improve for the effect of polymer on the enhancement of the performance of IR photoconductive detector. The effects of the coating CNTs film with polymer on the response time of the detector investigated and found that the rise time was 1.428 ms, response time 2.14 ms while the fall time was 3.92ms .

دراسة وتحقيق بشان عدم استقرارية الانجراف المنحني في الغلاف المغناطيسي للنجم النابض بالقرب من منطقة الاسطوانة الضوئية == Study and Investigation of Curvature Drift Instability in Pulsar Magnetosphere Near Light Cylindrical Region

اسم المؤلف: محمد عبد الستار عبد الرحمن
اسم المشرف: ماجدة حمدان خضير الكبيسي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The case of curvature drift instability in pulsar magnetosphere is a phenomenon may be responsible of many properties including radio waves, that was studied its reasons. We studied the magnetic fields around the pulsar, and our study was nearby the light cylinder region, because the curvature of the magnetic field be greater in the light cylinder region (~ 107 cm).The value of magnetic field was calculated by using mat lab program in two ways : The standard model and relativistic model. Where the relativistic model includes two cases : flat space time and curved space time. The values of the two cases were compared, According to standard model the magnitude magnetic field component (Br ) equal to 1012 G and the magnitude magnetic field component (Bθ ) equal to 1011 G but in relativistic model equal to 1019 G and 1014 G respectively and this noticeable increasing in values because the mass factor enter in calculation , This was first part from study.The second part of the study includes the calculation of drift velocity, which was about (107 cm/sec) in standard model, The drift velocity in relativistic model was (102 cm/sec), Where the drift velocity values which can produce the curvature radiation must be in the range between (106 cm/sec) and less than the speed light.The calculated drift velocity was used to calculate the growth rate instability for each the primary particles which its Lorentz factor equal (108), the value of growth rate instability (1013 s - 1), and the energy loss rate (10 - 6 erg.s), while the secondary particles which its Lorentz factor equal to (104), the value of growth rate instability was (1015 s - 1) and the energy loss rate equal to (10 - 21 erg.s)

ازالة الغشاوة من الصور الرقمية باستخدام التقنيات الترددية المعتمدة على دالة النشر النقطي == Deblurring Digital Images by Using Frequency Domain Techniques Based on Point Spread Function

اسم المؤلف: مالك عطیة دشر
اسم المشرف: حازم كاطع دواي الخزاعي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الاغشية الرقيقة
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:

تحضير SnO2 النانوي ودراسة تاثير التشويب على الخواص التركيبية والبصرية == Preparation SnO2 nanoparticles and Study the Effect of Doping on Structure and Optical Properties

اسم المؤلف: كرار امين قدوري محمد
اسم المشرف: طارق عبد الرضا علوان الظاهر
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا البحث تحضير مسحوق SnO2 النانوي النقي المحضر من املاح القصدير المتمثلة بملح SnCl4.5H2O بطريقة الصول - جل بثلاثة مذيبات مختلفة وهي الماء، والميثانول، والايثانول، وتم اجراء عملية التلدين عند درجة حرارة (400°C) .تم اختيار المذيب الايثانول لاعطائه اكبر كمية من المسحوق ومطابقته للملف ذي الرقم (JCPDS : 41 - 1445) لتحضير العينات المشوبة (بالنيكل والمغنيسيوم والكادميوم) كل على انفراد وبثلاثة تراكيز (5, 10 و%15) من كل عنصر ثم اجريت عملية تلدين لهذه العينات لدرجة (700°C).اظــهرت نتائج حـيود الشعاع السيني ان جــميـع العينات المحـضـرة تمتلك نظاما رباعيا متعددة التبلور وفحصت العينات للمدى الزاوي (°20 - °100)، وظهرت السطوح الاربعة الاعلى شدة وهي ((110, (101), (200), 211))، تم حساب الحجم الحبيبي بطريقة ديباي - شيرر وبطريقة وليامسون - هول، وبينت النتائج ان حجم الحبيبات يقل بزيادة نسبة التشويب، كما تم حساب العديد من المعلمات التركيبية كثوابت الشبيكة وفسحة السطوح، والكثافة، والمساحة السطحية النوعية، وعدد خلايا الوحدة، وكثافة الانخلاعات، والاجهادات المجهرية وعامل التشكيل وعامل طبيعة السطح. اوضحت نتائج فحوص (AFM) طبيعة السطح للعينات المحضرة، وقد تم حساب معدل الحجم الحبيبي، ومعدل الخشونة، وقيمة جذر مربع المعدل(RMS) وكانت مختلفة من حيث معدل خشونة السطح. حيث تقل الخشونة بزيادة نسبة التشويب، ويقل معدل قطر الحبيبات بزيادة نسبة التشويب التي اتفقت مع نتائج حيود الشعاع السيني وكانت تتراوح ما بين (127.71 - 69.64) nm، وقد اظهرت صور (SEM) ان اشكال الحبيبات النانوية للنماذج (P4,N3,M3,C3) كروية او شبه كروية متجمعة بهياة عناقيد وظهر البعض منها بشكل متكتل. اما بالنسبة لفحص (EDX) فقد اظهرت جميع العينات قمة عالية عند ~3.5) keV) للقصدير مع ظهور قمم صغيرة لعنصر الكلور والبوتاسيوم التي عدت كشوائب بنسب وزنية ضئيلة جدا نتيجة عملية التحضير للعينة النقية، اما العينات المشوبة فقد اظهرت قمم مادة التشويب بالاضافة الى القصدير الا ان الاوكسجين لم يظهر في فحص (EDX).ومن خلال تسجيل طيـف الامتصاص لمحلول SnO2 وضـمن مــدى الاطــوال الموجـية (300 - 900 nm)، اوضحت النتائج ان الامتصاصية تزداد بزيادة نسبة التشويب لجميع العينات، اما فـجـوة الـطاقة البصرية للانتقال الالكتروني المباشر الـمـسـمـوح باستعمال معادلة (Tauc) وباستخدام معادلة (Kubelka - Munk) فقد وجد انها تقل بزيادة نسبة التشويب. | In this research, pure SnO2 Nanopowders were prepared from tin salt (SnCl4.5H2O) by sol - gel method using three different solvents; water, methanol and ethanol. The preparered powders annealed at temperature (400°C). according to the result of prepared powder, the sample of ethanol as a solvent is taken into consideration due to the greater amount of the powder is produced and it’s in a good agreement with the File No. (JCPDS : 41 - 1445). The preparation of doped samples is performed using ethanol as a solvent with each one of the dopants (Nickel, Magnesium and Cadmium) with three percentages (5, 10 and 15)% of each element. Then nine prepared doped samples as well as the pure one were annealing at (700°C).XRD results show, all prepared samples have polycrystalline tetragonal crystal system. The scan of x - ray in the range of Bragg’s angle (20 - 100)° which revealed the four highest intensity peaks, (110),( 101),( 200) and ( 211)planes. From the diffraction pattern of each sample, the crystallite size is calculated by Debye - Sherrer and Williamson - Hall methods. Their results showed that grain size decreases with increasing ratio of doping concentration, also there has been many parameter likes; lattice constants, interplanar distance, specific surface area, number of unit cells, intensity, dislocations density and macrostrain which are calculated. AFM test revealed the morphology of the prepared samples. Their grain size, roughness and average root mean square value (RMS) are different for each sample. Surface roughness decreased with the increase of the dopant percentage. The average grain size was ranging between (69.64 - 127.71) nm and is decreased with the increase of dopant percentage and this show a good agreement with the XRD results. SEM for the sample (P4, N3, M3 and C3) revealed spherical or semi - spherical nanoparticles agglomerate in the form of a cluster. While EDX test shows a high peak at (~ 3.5)KeV of the Tin, with small peaks of chlorine and potassium which are considered as impurity and that is due to its small quantity which is resulted from the process of preparation of pure sample. In the doped samples, the peaks of dopant elements appeared in addition to that of tin, but the oxygen does not appear.UV spectra for all samples are performed by dissolving some amount of the powder in the double distilled water in the range (300 - 900) nm, their results show the absorbance increases with the proportion of dopant concentration of all samples. The optical energy gap for allowed direct transition are calculated by using Tauc and Kubelka - Munk equations, which decrease with the increase of dopant percentage.

تاثـيـر الـتـعـويـض Gd وBa عـلى خـواص التوصيـلية الفائـقـة للمركب Bi1.6Pb0.4Sr2 - yBayCa2 - xGdxCu3O10+ ? == Effect of Gd and Ba Substitution on the Superconducting Properties of Bi1.6Pb0.4Sr2 - yBayCa2 - xGdxCu3O10+ ? Compounds

اسم المؤلف: فــردوس شاكــر احـمـد
اسم المشرف: ندى خضير عباس | لمياء خضير عباس
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم تحضير المركبات Bi1.6Pb0.4Sr2 - yBayCa2 - xGdxCu3O10±δ ولقيم (0≤x≤0.5) و(0≤y≤0.3) بطريقة تفاعل الحالة الصلبة التقليدية. كما درس تاثير التعويض الجزئي بـ Gd محل Ca والـ Ba محل Sr على التوالي على خواص التوصيلية للمركب بواسطة مطياف حيود الاشعه السينية (XRD)، مطياف الماسح الالكتروني (SEM )، مطياف تفريق طاقه الاشعه السينيه (EDX)،حساب محتوى الاوكسجين في المركب وقياسات المقاوميه الكهربائية DC. ان ظروف التلبيد المثلى للمركب النقي درجة حرارة تلبيد مساوية الى 850 درجة مئوية وبفترة زمنية 140 ساعة مع تبريد العينات في الهواء.استخدمت تحليلات الاشعة السينية EDX لفحص نسبة العناصر المكونة للمركب Bi1.6Pb0.4Sr2 - yBayCa2 - xGdxCu3O10±δوطاقاتها وقد تمت المقارنة بين تراكيز العناصر في العينات التي اظهرت حالة التوصيل الفائق. بينت تحليلات حيود الاشعة السينية لجميع نماذج فائقة التوصيل انها تمتلك طورين الطور الفائق التوصيل العالي (2333)BiPb - والطور الفائق التوصيل الواطئ (2212)BiPb - مع وجود طور الشوائب. وان جميع العينات لها تركيب معيني قائم. كما تم حساب ثوابت الشبيكة، النسبة المئوية لوجود الطور العالي (2333)BiPb - للعينات وكذلك كثافتها كما وجد بان قيمة الثابت البلوري (a) تزداد مع زيادة نسبة الكادلنيوم بينما تقل قيمة الثابت البلوري (c).بينت قياسات المقاومية الكهربائية ان قيمة درجة حرارة الحرجة Tc تقل مع وجود التعويض. وهذا الهبوط في قيمة Tc يشير الى ان الاخماد في خاصية التوصيل المفرط في النماذج المعوضة بـ Gd وBa يكون اقل من النماذج المعوضة بـ Gd فقط. قيمة درجة حرارة الحرجة Tc في النماذج المعوضة بـ Gd باعلى من 0.2 تقل الى 100.5 K، بينما قيمة محتوى الاوكسجين يقل. زيادة تركيز الـ Gd الى x≥0.3 يؤدي الى انتاج نماذج شبه موصلة.كما وجد ان التعويض بـ Gd وBa معا ادى الى تحسين قيمة الـTc الى 102K عند x=0.2 وy=0.1. كما ان قيمة المقاومية تقل قليلا لكنها لا تصل الى القيمة الصفرية لانها تتصرف بسلوك شبه فائق التوصيل.استخدم المجهر الالكتروني الماسح SEM لمعرفة طبيعة السطح لطور التوصيلية الفائقة وكذلك لبحث تاثير التعويض بـ Gd فقط واظهرت النتائج تواجد تراكيب على شكل صفائح والتي تميز انماء الحبيبات للطور BiPb - (2223) العالي. حيث تبدو الحبيبات نوعا ما كثيفة ومترابطة جيدا.اذ ان هذه الحبيبات في النماذج المعوضة بـ Gd فقط تكون اكبر حجما ومختلفة جدا. اما اتجاهاتها فيبدو اقل عشوائية مع نقصان الفراغات. اضافة Ba يؤدي الى زيادة الفراغات والتي تزيد من المسافة بين الحبيبات.تم تعيين الحجم الحبيبي للنماذج المحضرة باستخدام مايكروسكوب القوى الذرية (AFM)، كما تم تعين الخشونة كداله لنسب التعويض ايضا. | A series of the compounds with nominal composition Bi1.6Pb0.4Sr2 - yBayCa2 - xGdxCu3O10±δ with (0≤x≤0.5) and (0≤y≤0.3) were prepared by the conventional solid - state reaction method. The influence of gadolinium and barium substitution at Ca and Sr sites respectively on the superconducting properties, have been investigated by the X - ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive x - ray spectroscopy (EDX), oxygen content and DC electrical resistivity measurements. The optimum sintering temperature for the pure composition is 850˚C and sintering time is 140h by two steps.Energy dispersive x - ray spectroscopy (EDX) analyses was used to test the proportions of the elements of the compound of Bi1.6Pb0.4Sr2 - yBayCa2 - xGdxCu3O10±δ.X - ray diffraction analysis revealed that there exists two phases i.e. BiPb - (2223) and BiPb - (2212), in addition to the impurity phases. It was found that the crystal structure was orthorhombic. Parameter values, the volume fraction of the (2223) - phase of prepared samples and their densities have been calculated. It was found that the lattice parameter value a increase with the increase of Gd content, while the lattice parameter value c was decreased. Electrical resistivity measurements show that the value of the superconducting critical temperature Tc decrease with the supstitutions content. The depression of Tc indicates that the suppression of the superconductivity in Gd and Ba substituted samples is lower than that Gd substituted only.Substitution of Gd up to 0.2 will decrease the transition temperature to TC=100.5 K, while excess oxygen content decreases. Increasing of Gd content to x≥0.3 produced semiconductor samples. It has been found that substitution of Gd and Ba together enhance TC to 102 K at x=0.2 and y=0.1. The resistivity decreases slowly but does not become zero even at the boiling point of liquid nitrogen but it behaves like a superconductor. The morphology of the samples obtained by SEM of the sample substituted with Gd only shows the layered structure which characterizes the growth of BiPb - (2223) grains. The grains appear rather dense and well connected.The grain in samples containing Gd only have a larger size and aspect very different. Their orientation seems less random and porosity even smaller. The addition of Ba appears to increase the porosity which manifested in large space between the grains. The grain size of samples were determined by atomic force microscope (AFM) techniques, the roughness were also determined

تصميم منظومه تفريغ حاجز الجهد العازل ودراسه تاثير البلازما غير الحراريه المنتجه في الضغط الجوي على بعض خصائص كاشف الاثر النووي CR - 39 == Design of Dielectric Barrier Discharge and Study the effect of Atmospheric Pressure non thermal Plasma on some Properties of CR - 39 track Detectors

اسم المؤلف: فاطمه علي خضير
اسم المشرف: حامد حافظ مربط
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: فيزياء البلازما
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الدراسة تم تصميم وتصنيع منظومة تفريغ حاجز الجهد العازل Dielectric Barrier Discharge تعمل هذه المنظومة على انتاج البلازما غير الحرارية عند الضغط الجوي الاعتيادي، تتالف المنظومة من قطبين مصنوعين من الستانلس ستيل بقطر(50ملم) ومعزولين بمادة التفلون بقطر (10) ملم,القطب الاعلى ثابت والقطب الاسفل مثبت على منصة قابلة للحركه للاعلى والاسفل لاجل تغير المسافه مابين الاقطاب. تم استخدام نوعين من المواد العازله بين الاقطاب : الزجاج والتفلون وباسماك مختلفه لكلا المادتين (1,2,3) mm وذلك لغرض المقارنه. تم دراسة خصائص المنظومة الكهربائية من رسم منحني تيار - فولتية وفولتية الانهيار الصامت لكل مادة عازلة ولثلاثه مسافات فاصلة بين الاقطاب (1,2,3 mm). حيث وجد انه بزيادة المسافة بين الاقطاب من (1الى 2الى3) ملم تزداد فولتية الانهيار. كذلك وجد ان قيم التيار تزداد بنقصان المسافة بين الاقطاب ،وكذلك شملت هذه الدراسه تاثير سمك الماده العازله المستخدمه على فولتيه الانهيار وقد وجد ان زياده سمك الماده العازله تؤدي الى زياده قيمه فولتيه الانهيار.وقد تم ايضا دراسه تاثير تردد فولتية التفريغ على قيم تيار التفريغ باخذ قيم التردد (50, 1000, 500, 750, 1250) هيرتز . تم دراسة تاثير البلازما الغير حراية الناتجة من المنظومة على كاشف الاثر النووي الصلبه، حيث تم تعريض كاشف الاثر النووي من نوع CR - 39 المشعع بجسيمات الفا من مصدر الفا ( الراديوم - 226) الى البلازما الناتجة من المنظومة لفترات زمنية (60 - 1) ثانية، وقد وجد ان اثار جسيمات الفا على الكاشف تظهر بعد ( 10) ثانية من تعريض الكاشف للبلازما وتزداد كثافة الاثار على الكاشف بزيادة زمن التعريض الى ان تصل لقيمتها العظمى عند الزمن (50) ثانية ثم تبدا بلاختفاء. | In this study the design and manufacture of Dielectric Barrier discharge system was done. This system works to produce non - thermal plasma at normal atmospheric pressure. It consists of two electrodes made of steel (stainless steel) with radius (50mm) and isolated with Teflon of radius (10mm), the upper electrode is fixed and the lower is plaud on a movable stand that can move upper and lower to control the distance between the electrodes. Two types of isolated materials are used between the electrodes with different thicknesses. The properties of the designed system was studied from the current - voltage characteristics curve and silent discharge voltage for every insolate matter and for three distances between electrodes (1,2,3)mm. It is found that with increasing the distance between the electrodes from (1 to 2 to 3) mm discharge voltage increases and it's also found that the value of current increases with decreasing distance between electrodes.This study also included the study of the effect of the insolated matter thickness on discharge voltage. It's found the increasing of the isolated matter thickness lead to increase the value of discharge voltage and we also studied the effect of frequency of discharge voltage on the value of discharge current for different values of frequency (50,500.750.1000.1250) HZ.The effect of non - thermal plasma that was produced from the system on Solid State Nuclear Track Detectors has been studied where State Nuclear Track Detectors type CR - 39 radiated by alpha particle from alpha source (Radium - 226) is exposed by plasma produced from the system for time from (1 - 60 sec) it is found that the effect of alpha particle on detector is appears after (10) sec from exposure of detector to plasma and the number of tracks on detector will increase by increasing the time of exposure so it reach it's maximum value at time 50 sec and begin to disappear

تاثيرات الاشعاع على الخصائص البصرية لاغشية صبغة مثيلين ازرق المطعمة بpva == Radiation Effects on Optical Properties of Methylene Blue Dye Doped PVA Films

اسم المؤلف: عمار نجم عبد
اسم المشرف: محاسن فاضل هادي الكاظمي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: اجري هذا البحث على مرحلتين, الاولى هي دراسة الخصائص البصرية والتركيبية لاغشية صبغة المثلين الازرق(Methylene blue) المطعمة ببوليمر بولي فينيل الكحول(PVA) وبنسب تطعيم مختلفة وهي (10, 15, 20, 30, 40) مل من محلول الصبغة وبتركيز(1*10 - 5) مول/لتر. كل النماذج حضرت بطريقة الصب والمرحلة الثانية هي تشعيع هذه الاغشية باشعة كاما وبيتا وبجرع مختلفة ودراسة تاثير انواع التشعيع على الخصائص البصرية والتركيبية لها.حيث وجد ان طيف الامتصاص يزداد بزيادة نسب التطعيم لكل من قمتي الصبغة والبوليمر مع وجود ازاحة باتجاه الاطوال الموجية الاطول (ازاحة حمراء), وتم دراسة فجوة الطاقة البصرية ووجد ان فجوة الطاقة الطاقة للبوليمر تتناقص مع زيادة نسب التطعيم مع ثبات فجوة الطاقة للصبغة وقد تم دراسة الثوابت البصرية الاخرى والتي تشمل (معامل الامتصاص, معامل الخمود, معامل الانكسار, وثابت العزل الكهربائي الحقيقي والخيالي).بعد تشعيع غشاء البوليمر النقي واغشية الصبغة المطعمة بالبوليمر ولمختلف نسب التطعيم باشعة كاما وجسيمات بيتا وجد ان هناك زيادة ملحوضة لطيف امتصاص البوليمر النقي بينما طيف الامتصاص هذا يتناقص لاغشية الصبغة المطعمة بالبوليمر وتعاني ازاحة باتجاه الاطوال الموجية الاصغر (ازاحة زرقاء) مع بقاء قمة امتصاص البوليمر على حالها, اما فجوة الطاقة فقد تناقصت بعد التشعيع للبوليمر وازدادت للصبغة لمختلف الاغشية وقد تم دراسة الثوابت البصرية الاخرى والتي تشمل (معامل الامتصاص, معامل الخمود, معامل الانكسار, وثابت العزل الكهربائي الحقيقي والخيالي).اما الفحوصات التركيبية فقد بين كل من حيود الاشعة السينية (XRD) وطيف (FTIR) عدم وجود تفاعل كيميائي بين الصبغة والبوليمر بعد الخلط وعدم تكسر الاواصر الاساسية لهما بعد التشعيع, واظهرت صور (FESEM) تعرض سطح البوليمر للتكسر وازدادت خشونتة بعد التشعيع بينما لم تتاثر كثيرا سطوح الاغشيه المطعمة من الصبغة والبوليمر بالتشعيع | The present work was carried out in two stages .The first stage was studying the optical and structural properties for methylene blue dye doped poly vinyl alcohol as a host polymer in different doping ratio of dye solution (10, 15, 20, 30, 50) ml with concentration of dye (1×10 - 5) mol/liter. All samples prepared by casting method. The second stage was irradiated all samples by Gamma ray and Beta particles in different doses and studying the optical and structural properties for them. The intensity of absorption spectrum increased with increasing doping ratio of dye solution for peaks of dye and polymer and gave red shift. The optical energy gap for PVA increased with increasing doping ratio of dye solution with remaind the energy gap for dye constant. The optical constants (Absorption coefficient, Extinction coefficient, Refractive index, Real and imaginary dielectric constants) was studied. After Gamma and Beta irradiation pure PVA film and MB/PVA films with different doping ratio of dye solution and found that the absorption spectrum increased for pure polymer, while the absorption spectrum for dye is decreased for MB/PVA films and gave blue shift with remained the absorption peak of polymer constant. The optical energy gap for PVA decreased whereas the energy gap for dye increased after irradiation. The optical constants (Absorption coefficient, Extinction coefficient, Refractive index, Real and imaginary dielectric constants) was studied. The XRD and FTIR showed no interaction between dye and polymer after doping and there are no broken fundamental bands after irradiation. FESEM photographs illustrated that the surface of all films became more roughness after irradiation.

دراسة الخصائص التركيبية والكهربائية والمغناطيسية للفرايت النانوي ذي التركيب المغزلي المحضر بطريقة السول (NixCu0.2Zn0.8 - xFe2O4) - جل ذات الا حتراق التلقائي == Studying Structural , Electrical and Magnetic Properties for Nano Spinel Ferrite of (NixCu0.2Zn0.8 - xFe2O4) Prepared by Sol - Gel Auto Combustion Method

اسم المؤلف: عمار عيسى عباس نجم الربيعي
اسم المشرف: احمد رفيق عبد المجيد
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: In this research , Nano spinel ferrite (NixCu0.2Zn0.8 - xFe2O4) was synthesized using sol - gel auto - combustion and flash combustion methods .Nineteen samples were prepared and their studies were divided into three parts. Study the effect of citric acid in preparation of Nano ferrite (Ni0.1Cu0.2Zn0.7Fe2O4) by changing the molar ratio of adding fuel to any sample and the five samples were prepared from (C series). The structural properties of samples were studied using x - ray diffraction technique (XRD) and scanning electron microscope (SEM) which showed that the obtained ferrite possesses spinel cubic phase for all used molar ratios , besides when the concentration of adding fuel was increased leads to decrease in grain size and theoretical density , increase in dislocation density and the surface area. Then the molar ratio (1 : 1 M) was chosen as the best adding ratio due to that the obtained ferrite at this ratio possesses best texture coefficient with small grain size and best internal strain by comparing with the other ratios.  Study the influence of substitute (Zn+2) ion by (Ni+2) ion on the structural , electrical and magnetic properties of Nano ferrite powder (NixCu0.2Zn0.8 - xFe2O4)(0.1≤X≤0.7) synthesized using sol - gel auto - combustion method , there are seven samples were prepared (A) series and tested by two types of structural test included analyzer x - ray diffraction and scanning electron microscope, the results exhibited forming the spinel phase for all samples in spite of the substitute of (Zn+2) ion by (Ni+2) ion, and the increase of (Zn+2) ions concentration leads to decrease in the grain size and increase in theoretical density. Then the ferrite powder was divided in two groups, the first was pressed into the pellet shape which was used in electrical tests and the second group was pressed into the rings shape which was used in magnetic tests. The two faces of the pellets in first group polished by silver paste material in case to obtain a ceramic capacitors that subjected to electrical tests which included the measurement of dielectric constant , dielectric loss coefficient, alternating electrical conductivity and direct electrical conductivity ,and the study of magnetic properties for the rings samples included measurement of hysteresis loop , selfinduction, initial permeability and the relative loss factor. The results of electrical tests exhibited decrease in dielectric constant with frequency increase at room temperature , and dielectric constant increases at certain ratios of adding (Zn+2) ions and decreases at other ratios. However , the dielectric loss coefficient its fall when increasing frequency until reaches its lowest value at the high frequencies values and so it is various when the concentrations of (Zn+2) ion were changed .and the measurement of alternating electrical conductivity displaying it increases with the increasein frequency and it values disparity with the change of (Zn+2)ion concentration , in other hand the direct electrical conductivity increase with substituting (Zn+2) ion concentration increases. The magnetic tests results exhibited that the ratio (X=0.3) with chemical formula (Ni0.3Cu0.2Zn0.5Fe2O4) possesses a significant magnetic properties when compared with other samples because it has the highest initial permeability with lowest relative loss factor and it has best hysteresis loop so that it realized conditions for using it as a cores in transducers and electrical motors. Study the influence of substituting (Zn+2)ion by (Ni+2) ion on the structural properties of Nano ferrite (NixCu0.2Zn0.8 - xFe2O4)(0.1≤ X≤ 0.7) synthesized using flash combustion method, there are seven samples were prepared (F) series tested by two types of structural tests included xray diffraction and scanning electron microscope tests , and the results exhibited form the spinel phase for all samples and no other phases were presented and observed that structural results were agreed with these obtained from sol - gel auto - combustion method.

تحسين خصائص كاشف ضوئي باستخدام تقنية التنميش الثنائي للسليكون == Improve of photodetecter characteristic using both sides porous silicon technique

اسم المؤلف: عباس كسوب جار الله الخزرجي
اسم المشرف: وسام جعفر عزيز الدجيلي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: الخلاصة تم في هذا البحث دراسة الخصائص الكهربائية والبصرية والتركيبية لاغشية اوكسيد الزنك (ZnO) النقية والمشوبة بالانديوم (In) بنسب مختلفة (1%, 3%) المحضرة بطريقة الرش الكيميائي الحراري, والتي رسبت على قواعد زجاجية وسليكون مسامي بدرجة حرارة (400±10 oC) وبسمك (120±10 nm). قواعد السيليكون المسامي (لجانب واحد وللجانبين) تم تحضيرها بواسطة طريقة التنميش الكهروكيميائيه على رقائق من السليكون (100) .P - Type الكاشف الضوئي (سليكون مسامي/سليكون بلوري/سيليكون مسامي) (PS/c - Si/PS) صنع وحسن بترسيب الاكاسيد الموصلة الشفافة (ZnO/PS/c - Si/PS) و(IZO/PS/c - Si/PS). السيليكون المثقب كان بمسامات دقيقة (pore size > 50 nm) وقطر المسام يتراوح (0.5 - 1 μ m) وزعت المسامات بشكل عشوائي على سطح السيليكون المثقب. الكثافة العالية للمسامات يمكن ان تلاحظ والمسامية تقريبا .(67%) معدل السمك للجانب الامامي (المصقول) (6 μm) وللجانب الخلفي (الغير المصقول) (3 μm) تقريبا. طبيعة السطح للاغشية المرسبة على السيليكون المسامي تكون ذات سطوح خشنة مقارنة مع الاغشية المرسبة على قواعد زجاجية. بينت تقنية حيود الاشعة السينية ان كل الاغشية المحضرة على القواعد المختلفة هي ذات تركيب سداسي متعدد التبلور hexagonal wurtzite)) مع اتجاه تفاضلي سائد(002) ويعرض قمم جديدة اعتمادا على نوع القاعدة كذلك من خلال حيود الاشعة السينية نرى ازاحة في زوايا الحيود وتناقص في الحجم البلوري بسبب التشويب للاغشية المحضرة على قواعد زجاجية من (31.18 nm) الى (12.19 nm). اظهرت صور (AFM) مجهر القوة الذرية طبيعة السطح للاغشية المرسبة على قواعد زجاجية بان الاغشية المشوبة بالانديوم ناعمة ومنتظمة. نعومة الاغشية تتناقص مع تركيز (1%) ثم تصبح اكثر نعومة عند تركيز .(3%) النفاذية كانت عالية جدا للاغشية غير المشوبة والمشوبة بالانديوم لمدى من الاطوال الموجية ( (350 - 850 nm. النفاذية تقريبا (79%) قبل تاثير التشويب ثم تصبح (81 %) مع نسبة تشويب (1%) وتتناقص مع تركيز (3%) الى ( (71% .فجوة الطاقة كانت (3.1 eV),(3.22 eV), (3.21eV) للاغشية (pure ZnO) (IZO 1%) و.(IZO 3%) تتناقص المقاومية (ρᴏ) للاغشية المشوبة في درجة حرارة الغرفة مع زيادة تركيز الانديوم من (1%) الى 3%) ) . نلاحظ من خصائص I - V زيادة التيار الضوئي تحت شرط الاضاءة ونتيجة لزيادة تركيز الانديوم يزداد التيار الضوئي لكل الاغشية. كذلك يزداد التيار تحت شرط الظلام مع زيادة تركيز الانديوم ولكن هذه الزيادة اقل من الزيادة تحت شرط الاضاءة. الاستجابة الطيفية تزداد مع زيادة الطول الموجي لكاشف ضوئي PS/c - Si/PS وتصبح تقريبا (0.69 A/W) عند طول موجي (490), كذلك حسنت الاستجابة الطيفية للكاشف الضوئي بترسيب الاكاسيد الموصلة الشفافة على السيليكون المسامي (ZnO and IZO) بتراكيز انديوم مختلفة. الاستجابة الطيفية لكاشف (ZnO/PS/c - Si/PS) تساوي (0.73 A/W) عند الطول الموجي (385 nm) بينما الاستجابه الطيفية لكاشف (IZO/PS/c - Si/PS) كانت (0.84 A/W) عند الطول الموجي (400 nm). كذلك زمن الاستجابة وزمن الرجوع حسن بترسيب (TCO) . يتناقص زمن الاستجابة من (8 second) لكاشف ضوئي PS/c - Si/PS)) الى (4 second) بترسيب اغشية (IZO) بنسبة تشويب (3%) كذلك يتناقص زمن الرجوع من (6 second) لكاشف PS/c - Si/PS)) الى (2 second) لكاشف (IZO/PS/c - Si/PS). | In this work, structural, optical and electrical properties of have been studied for un - doped and In doped zinc oxide (ZnO) thin films with different indium doping concentrations (1% and 3%) prepared by a chemical spray pyrolysis technique, deposited on glass and porous silicon (PS) substrates at temperature (400±10 oC) with (120±10) nm thickness. The porous silicon substrates (one - side and two - sides) were formed by electrochemical etching of P - type (100) silicon wafers. Photodetector of (PS/c - Si/PS) has been fabricated and improved (ZnO/PS/c - Si/PS) and (IZO/PS/c - Si/PS) by deposited the transmittance conducting oxide (TCO). The porous silicon was macro pores (pore size > 50 nm) and the pore diameter ranging from (0.5 - 1 μ m), which formed by electrochemical etching on p - type (100) silicon wafer, the pores evidently randomly distributed on the porous silicon surface, the high density of pores has been observed and porosity is approximately (67%). The average thickness of front side (polish side) PS was approximately (6 μm) and about (3 μm) of back side (un - polish side). The surface morphology of the thin films deposited on porous silicon was high surface roughness compared with thin films deposited on glass substrates. The X - ray diffraction technique has showed that all prepared films on glass and PS substrates are polycrystalline structures of hexagonal wurtzite with preferential orientation of plan (002) direction and showed the new peaks depend on the substrate type, also from XRD see shifted in diffraction angle and decreased in crystal size by doping for films deposited on glass substrate from (31.18 nm) to (12.19 nm). AFM images showed that the surfaces morphology of deposited films on glass substrates that the IZO films seem smooth and uniform. The roughness of the films decreases with indium concentration 1% and then become very smooth with indium concentration 3%. The transmittance was very high for un - doped ZnO and IZO films within wavelength range (350 - 850 nm). The transmittance about (79%) before the doping effect then become (81 %) with doping concentration (1%) and decreased with doping concentration (3%) about (71%). The energy gap were (3.21eV), (3.22 eV) and (3.1 eV) of (pure ZnO), (IZO 1%) and (IZO 3%) respectively. The resistivity (ρᴏ) of IZO films at room temperature decrease with increasing of indium concentration (1% and 3%) concentrations. I - V characteristics observed the photocurrent increase under the illumination condition and increasing in indium concentration that result to increasing in photocurrent for all films. In the dark condition the dark current also increasing with increasing of indium concentration but this increases less than the increased under illumination condition. The spectral responsivity increased with increasing the wavelength for PS/c - Si/PS photodetector and become about (0.69 A/W) at wavelength (490 nm), also improved the spectral responsivity for the photodetector by deposited the transparent conducting oxide (ZnO and IZO) on porous silicon with different concentration of the indium. The spectral responsivity of (ZnO/PS/c - Si/PS) detector was equal (0.73 A/W) at wavelength (385 nm) while, the spectral responsivity of (IZO/PS/c - Si/PS) detector was (0.84 A/W) at wavelength (400 nm). The response time and recovery time also improved by deposited the (TCO). The response time decreased from (8 second) of PS/c - Si/PS photodetector to (4 second) by deposited IZO films with doping concentration (3%) and recovery time also decreased from (6 second) of PS/c - Si/PS to (2 second) of (IZO/PS/c - Si/PS).

دراسة الصفات الحرارية والميكانيكية وعمر الاداء PVC لبوليمر == Study of the Thermal, Mechanical Properties and Lifetime of PVC Polymer

اسم المؤلف: صهيب صباح احمد
اسم المشرف: وداد حمدي جاسم | محمد عبد النبي ثجيل
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: In this work, mechanical behavior of PVC product like pipes with different origins (K.S.A and Egypt) and Turkey doors with different manufacturing (Nova and Firat) which are used in Iraqi markets were studied.The objective of this work was to study the mechanical properties like ultimate tensile strength, Young's modulus, elongation at Max., elongation at break, impact strength, flexural strength and hardness of the pipes and doors.The experimental results show that K.S.A pipes exhibited maximum ultimate tensile strength and Young's modulus than that the Egypt pipes.However, the Egypt pipes exhibited maximum elongation at Max. and elongation at break when compared with K.S.A pipes.All the tensile properties of Firat doors are greater than that of Nova doors.Comparison of the flexural strength of pipes and doors. The pipes have the same flexural strength but the Firat doors have maximum value than Nova doors.Egypt pipes have a higher impact strength than K.S.A pipes. While the Firat doors have a higher impact strength than Nova doors. The experimental results of hardness Shore D indicated that K.S.A pipes exhibited maximum hardness number (83.7) than Egypt one, while the Firat and Nova doors have the same values.In this study, thermal properties of Firat and Nova have been evaluated, firstly by thermal conductivity and second by thermal stability and degradation. The Firat doors have better thermal conductivity than that of Nova doors. From the thermogravimetric analysis at different heating rates (2, 5, 10, 20 and 40 °C/min). The Firat doors have a higher thermal stability than Nova one.The Egypt pipes exhibited more thermal stability than the K.S.A pipes.From the TGA curves the activation energy of pipes and doors are determined at different conversion levels. At 30% conversion level when the mechanism of degradation would be stable and the value of activation energy of Egypt pipes and Firat doors is (108.35 KJ/mole) when it is (101.39 KJ/mole) for K.S.A pipes and (98.35 KJ/mole) for Nova doors. Thermogravimetric analysis (TGA) provides a method for accelerating the lifetime testing of polymers so that short - term experiments can be used to predict in use lifetime.The lifetime is decreased with increase of the temperature, at fixed temperature like 70 °C the lifetime of Egypt pipes is (≈100 years) while lifetime of K.S.A pipes is (≈21 years). At the same temperature (70 °C) the lifetime of Firat doors is (≈72 years) while the lifetime of Nova doors is (≈21 years).Thermomechanical analysis (TMA) test showed the glass transition temperature (Tg) and softening point (Ts) for pipes and doors. The K.S.A pipes have value for Tg and Ts higher than that of Egypt pipes, while the Firat and Nova doors have the same values.

دراسة تحليلية للحام بالليزر على الخواص الحرارية - الميكانيكية للبوليمرات باستخدام برنامج ANSYS == Analysis Study of Laser Welding on Thermal - Mechanical Properties of Polymers Using ANSYS Program

اسم المؤلف: زينه يونس علي
اسم المشرف: خالد هادي مهدي العبيدي | ندى فاضل توفيق
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: الخلاصةان الهدف من هذه الدراسة, هو التنبؤ بسلوك المواد من حيث الخصائص التركيبية ,الحرارية والميكانيكية اثناء عملية اللحام في 3 - D. ان دراسة الخصائص التركيبية للمادة قد تم باعتبارها دالة لدرجة حرارة الانتقال الزجاجي T_g, ودرجة حرارة الانصهار T_m, وتغير الطور بينما يتم دراسة الخصائص الحرارية وفقا لتوزيع درجات الحرارة, والتدرج الحراري, والفيض الحراري, واخيرا يتم دراسة الخواص الميكانيكية بواسطة الاجهاد والمطاوعة.لقد تم تبني طريقة FEM لمحاكاة عملية اللحام لقطعتين متشابهتين ومختلفتين من مادة البولي بروبلين والبولي ستيرين في ثلاثة ابعاد. ان تحليل الخصائص الحرارية والميكانيكية لبوليمر البولي بروبلين والبولي ستيرين قد تم بدلالة كل من نموذج الحالة المستقرة والنموذج المتنقل باستخدام برنامج ((ANSYS 11. حيث ربط نموذج الحالة المستقرة (اعتبرت انها الحمل الابتدائي) مع نموذج الحالة المتنقلة بافتراض وجود الحمل الحراري والميكانيكي سوية بنفس الوقت على اعتبار ثبوت سرعة اللحام عند20ملي/ثانية ودرجة الحرارة عند 298م, وكذلك تم اختبار تاثير قدرة الليزر باستخدام ثلاثة قيم 50) (150,100 واط, كذلك درست تاثير نصف قطر بقعة الليزر على خصائص البوليمرات المستخدمة.بينت النتائج العددية قابلية لحام كل من المادتين البولي بروبلين والبولي ستيرين بهذه الطريقة, حيث لوحظ تناقص التشوهات الحرارية والميكانيكية الناجمة عن اللحام, كما يشير الشكل الهندسي هذه الاجهادات الى جودة اللحام. وبينت الدراسة ان كل من الفيض الحراري والانحدار الحراري يكون عند اعظم قيمها في اتجاه y - axis وهو اتجاه تسليط الليزر, وكانت درجة الحرارة العظمى في لحام كل من PP - PPو PP - PS هي ((351.4kو (425.9k) على التوالي. اما الاجهادات الميكانيكية فقد كانت واطئة في كل من PP - PPو PP - PS بحدود (0.181*〖10〗^9MPa ) و(0.166*〖10〗^9MPa) والمطاوعة (0.171) و(0.142) لكل من PP - PP وPP - PS على التوالي. واخيرا، لوحظ صغر مساحة المنطقة المتاثرة حراريا اذ كانت بحدود (9.2 〖mm〗^2) بالنسبة ل PP - PP، في حين اظهر عمق الاختراق تحسن مقارنة مع الاساليب المستخدمة، حيث كانت قيمته بحدود (2.5mm), اما في نموذج المتنقل فقد لوحظ تضاعف المساحة المتاثرة وعمق اختراق قريب من نتائج النموذج المستقر. | The aims of this study is to estimate the material behavior properties in terms of its structure, thermal and mechanical properties during welding process in 3 - D. The structure is studied as a function of T_m , T_g and phase change. While the thermal is investigated according to thermal distribution, thermal gradient and thermal flux. Finally the mechanical is examined by stress and strain.Finite element method is adopted to simulate welding process of two similar and dissimilar pieces of polypropylene and polystyrene in 3 - D.The analytical of thermal and mechanical properties is done in terms of steady - state model and transient model using ANSYS 11 program, then coupling the steady - state with transient model by supposed existing thermal and mechanical loads together in same time. Laser power effect on welding is investigated by three powers (50,100,and 150watt) and by laser spot radius (1mm, and 2mm), the welding speed is supposed constant at (20mm/sec).Numerical results show that the ability of this method to joined polymers material PP and PS, where it is noticed that the thermal and mechanical deformations are reduced, also the geometry shape of welding zone is indicated to a good quality of welding.From this study, the thermal gradient and thermal flux are at their maximum values at y - axis, in which the laser direction, and T_max in PP - PP and PP - PS joints are (351.4k) and (425.9k) respectively. Mechanical stresses and strains had low values, about (0.181*〖10〗^9MPa) and (0.166*〖10〗^9 MPa) and strain are about (0.171) and (0.142) for PP - PP and PP - 1PS joint respectively.Finally, it is observed that narrow HAZ area (9.2〖mm〗^2) of PP - PP joint, while penetration depth shows improvement comparing with usual methods, it's value is (2.5mm). In transient model it observes that multiples of HAZ area, and D_p is near its value in steady - state model.

قياس المواد المشعة الطبيعية المنشا NORM والتراكيز الصناعية للمواد المشعة الطبيعية المنشا TE - NORM في حقل الاحدب النفطي == Natural Occurring Radioactive Materials (NORM) and Technologically Enhanced NORM (TE - NORM) Measurements in AHDEB Oil Field

اسم المؤلف: زينب محمد حسن الزبيدي
اسم المشرف: هادي دويج العتابي | شفيق شاكر شفيق
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: واسط
الصفحات الاولى:
المستخلص: The activity concentrations of radium - 226 (226Ra), actinium - 228 (228Ac) and potassium - 40 (40K), which represent the main naturally occurring radioactive material (NORM), were measured in the oil stations of AHDEB oil field in Wassit governorate in Iraq. These activity concentrations were determined using gamma - ray spectroscopy with a hyper - pure germanium (HPGe) and sodium iodide (NaI (Tl)) detectors.The activity concentrations of the obtained data of the crude oil samples were revealed that the overall average specific activity (SA) for 226Ra, 228Ac and 40K were 174.72, 43.46 and 355.07 BqL ⁄. While, the maximum SA values of 226Ra and 228Ac were 212.30 and 52.42 Bq/L for the Crude oil sample taken from the well 32 of the layers of Musharraf oil field, and the maximum SA value of 40K was 465.35 Bq/L for Crude - oil sample taken from the Rumaila layer of the first well. The minimum SA values of 226Ra, 228Ac and 40K were 126.37, 30.59, and 229.98 Bq/L for the Crude oil sample under Hydrostatic pressure.The hazard indices have been calculated in the present work, which include radium equivalent activities (Raeq), gamma dose rate (D), external hazard index (Hex), internal hazard index (Hin), annual effective dose which include indoor and outdoor effective dose rate (E) in units of mSv/y and representative level index (Iγr), respectively. The overall average value of Raeq for the crude oil samples set was 264.21BqL⁄. This value is also considered to be normal (UNSCEAR, 1993). The highest Raeq was 311.01 Bq/L for sample taken from the Rumaila layer of the first well and the minimum value was 187.82 BqL⁄.The overall average value D for the full sample set was found to be 122.52 nGyh⁄. The highest value was 144.51 nGyh⁄ that was higher than the permissible value and the minimum value was 86.97 nGyh⁄.The overall average values of Hex and Hin were 0.7138 and 1.1861, respectively. The highest values of Hex and Hin were 0.8403 and 1.3861 and the minimum values were 0.5075 and 0.8403. The overall average value of Iγr was 1.8361. The highest value was 1.3017 and the minimum value was 2.1687. The overall average values of the Eied and Eoed were 0.259 and 0.0648 mSvy⁄.The highest values of Eied and Eoed in mSvy⁄ were 0.7089 and 0.1772 and the minimum values were 0.4266 and 0.1067.For sludge samples, the obtained data revealed that the average activity concentrations for 226Ra, 228Ac and 40K for these set of samples had the values; 340.1, 90.70 and 491.75 Bqkg⁄, respectively. The maximum activity concentrations of 226Ra, 228Ac and 40K were 573.38, 150.89, and 705.26 Bqkg⁄ appeared and the minimum concentrations were 178.64, 54.13, and 273.32 Bqkg⁄. The average value of Raeq was 507.71 Bqkg ⁄, the maximum value was 843.46 Bqkg⁄ and the minimum value was 277.10 Bqkg⁄. The average value of D for the full sample set was found to be 233.98 nGyh⁄. While the maximum value was 388.01 and the minimum value was 127.55 nGyh⁄. The average values of Hex and Hin were 1.372 and 2.291, respectively. The maximum values of Hex and Hin were 2.279 and 3.829 and the minimum values were 0.749 and 1.231. The average values of the Eied and Eoed were calculated to be 1.148 and 0.287 mSvy⁄. The maximum values of Eied and Eoed were 1.903 and 0.476 mSvy⁄ for SL2 sample, and the minimum values were 0.626 and 0.156 for SL6 sample. The overall average value of Iγr was 0.289, whereas the maximum value was 5.802 and the minimum value was 1.914.For ground water, the obtained data revealed that the average activity concentrations for 226Ra, 228Ac and 40K for these set of samples had the values; 25.05, 7.59 and 35.17 BqL,⁄ respectively. The maximum activity concentrations of 226Ra, 228Ac and 40K were 50.29, 15.24, and 76.94 BqL⁄ and the minimum activity concentrations were 13.70, 4.15, and 8.36 BqL⁄. The average value of Raeq was 38.61 BqL ⁄, the maximum value was 78.01 BqL⁄and the minimum value was 277.10 BqL⁄ for W3 sample. The average value of D was 17.75 nGyh⁄. The maximum value was 35.91 nGyh⁄ and the minimum value was 0.092 nGyh⁄. The average values of the Hex and Hin were 0.10 and 0.172, respectively. The maximum values of Hex and Hin were 0.211 and 0.347 and the minimum values were 0.055 and 0.092. The average values of the Eied and Eoed were 0.087 and 0.022 mSvy⁄, respectively. The maximum value of Eied was 0.176 mSvy⁄ and the minimum value was 0.045 mSvy⁄. Whereas the maximum value of Eoed was 0.044 mSvy⁄ and the minimum value was 0.011 mSvy⁄. The average value of Iγr was 0.226. The maximum value was 0.539 and the minimum value was 0.138.For radon (222Rn) measurements, the overall average values of the measured and calculated parameters were 296.64 Bq/m3, 118.65 Bq/m3, 1.651 WLM, 7.48 mSv/y, and 4490 for radon concentration, equilibrium equivalent 222Rn concentration, working level month, annual Effective Dose, and Excess Lung Cancer per Million Persons per Year (ECL).The background radiation of AHDEB oil field was measured and it is noted that this radiation backgrounds were ranged from 50 to 148 nSv.h - 1 with an overall average value of 80.64 nSv.h - 1.List of contents Title Page

الاستقرارية الفيزيائية - الكيميائية للمتراكبات PVA - MnSO4.H2O مع الظروف الجوية == Physico - Chemical Stability of (PVA - MnSO4.H2O) Composites against weather conditions

اسم المؤلف: زينب كاظم حمزة
اسم المشرف: اسرار عبد المنعم سعيد
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الدراسه تم تحضير افلام بولي فينيل الكحول وكبريتات المنغنيز المائي باستخدام تقنية الصب مع نسب وزنية مختلفة وهي (2, 5, 10, 15) من كبريتات المنغنيز المائي وقد تم دراسة الخصائص البصريه لها.وقد تضمن هذا العمل ايضا دراسة تاثير الظروف الجوية على الخصائص البصرية لكل النماذج المعرضة.كل النماذج المعرضة وغير معرضة للظروف الجويه شخصت بطرق مختلفة مثل التحليل الطيفي لاشعة تحت الت الحمراء (FTIR)وصور المجهر الضوئي.اظهرت النتائج التجريبية ان طيف الامتصاصيه يزداد بزيادة تركيز كبريتات المنغنيز المائي. فجوة الطاقة تقل بزيادة تركيز الاضافة. وقد تم دراسة الثوابت البصرية الاخرى والتي تشمل (معامل الامتصاص, معامل الخمود, معامل الانكسار, ثابت العزل الحقيقي والخيالي).بعدتعريض النماذج للبولي فينيل الكحول النقي وللمتراكبات (PVA - MnSO4.H2O) وبتراكيز مختلفه وجد ان طيف الامتصاص يزداد بزيادة فترة التعريض. فجوة الطاقه تقل بزيادة فترة التعريض. وقد تم دراسة الثوابت البصريه الاخرى والتي تشمل (معامل الامتصاص, معامل الخمود, معامل الانكسار, ثابت العزل الحقيقي والخيالي).وقد بين طيف (FTIR) عدم وجود تفاعل كيميائي بين المادة المضافة والبوليمر وليس هنالك تكسر بالاواصر الاساسيه لهما بعد التعريض للظروف الجوية, واظهرت صور المجهر الضوئي ان كل النماذج تصبح اكثر خشونة بعد التعريض. | In this study, (PVA - MnSO4.H2O) films are prepared by using casting technique with different concentration of Manganese (II) sulfates monohydrate (2, 5, 10 and 15) wt.% . Also the optical properties is studied, and this work is involved with study the effect of weathering condition of optical properties for all samples which exposure. All the samples that exposure and unexposure to weather conditions have diagnosed by different methods such as fouirer transform infrared spectroscopy (FTIR) and optical microscope images. The experimental results show that the absorption spectrum increased with increasing the concentration of (MnSO4.H2O). The optical energy gap decreasing with increasing of the concentration of the additive. The optical constants (absorption coefficient, extinction coefficient, refractive index, real and imaginary dielectric constants) are studied. After exposure the samples in the form of pure PVA and (PVA - MnSO4.H2O) composites with different concentration found that the absorption spectrum increases with increases exposure time. The optical energy gap decreasing with increasing exposure time. The optical constants (absorption coefficient, extinction coefficient, refractive index, real and imaginary dielectric constants) are studied. The FTIR shows no chemical interaction between the Polymer and the additives and there are no broken fundamental bands after exposure to the weather conditions. Morphological photographs illustrate that the surface of all films become more roughness after exposure.

تصميم وتصنيع الطلاء المضاد للانعكاس معتمدين طريقة الليزر النبضي في الترسيب == DESIGN AND FABRICATION OF ANTI REFLECTION COATING BY PULSED LASER DEPOSITION

اسم المؤلف: زينب حازم عبد الرحيم
اسم المشرف: الاء نزار عبد الغفار | كاظم عبد الواحد عادم
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا العمل تم تصميم طلاء المضاد للانعكاس بسمك ربع ولاربع طول موجي ودراسة خصائص بصرية للاغشية الرقيقة والاستفادة منهما في تصنيع طلاء مضاد للانعكاس ضمن المنطقة المرئية والحمراء القريبة . اعتمد تصميم الطلاء على مفهومين اساسيين هما نظرية المصفوفة المميزة وتصميم طلاء بسمك ليس ربع طول موجي ولحالة السقوط العمودي للضوء.اخذين بنظر الاعتبار ظاهرة التشتت. تم دراسة نفاذية وانعكاسية الطلاء كدالة للتغير في الطول الموجي للضوء الساقط باستخدام الرزمة البرمجية MATLAB. اوضحت نتائج التصميم امكانية الحصول على انعكاسية واطئة لمدى واسع من الطيف الكهرومغناطسي يشمل المنطقة المرئية ومنطقة الحمراء القريبة عندما يكون السمك البصري ضمن المدى اقل 0.7L لمادة MgF2 المرسبة على الزجاج ويكافي الاسماك الهندسية للغشاء (34.5,36.91,78.3) نانومتر, وامكانية الحصول على انعكاسية واطئة لمدى واسع في درجة حرارة التلدين عند سمك البصري 1.2L ويكافى السمك الهندسي ((141.6 نانومتر. تكتسب هذه النتيجة اهميتها في امكانية تخمين السمك الامثل قبل البدء بمرحلة التحضير حيث اشارت النتائج الى معادلة تجريبية تربط بين عدد النبضات وسمك الغشاء. لغرض تصنيع الطلاءالبصري, تم استخدام طريقة الترسيب بالليزر النبضي لليزر النيديميوم - ياك1064 نانومتر الذي يعامل بتقنية التولد المتوافق الثاني بطول موجي 532 نانومتر والذي يعمل بتقنية عامل النوعية بمعدل تكرارية (1 - 6) هرتز وامد نبضة 10 نانوثانية. لتحضير اغشية فلوريد المغنيسيوم المرسبة على الزجاج, قمنا بدراسة ظروف التحضير التي تتضمن التغير بعدد النبضات (150و250 و350و 450 نبضة) لترسيب اغشية فلوريد المغنيسيوم ومدى تاثيرهم على سمك الاغشية المحضرة وتركيبها وحجم الحبيبات وبالتالي على نفاذيته ومدى امكانية استخدامه كطلاء مضاد للانعكاس. لقياس سمك الاغشية المحضرة, تم استخدام جهاز مقياس اللبسومتر وتم استخدام جهاز المطياف لايجاد النفاذية والانعكاسية والثوابت البصرية ومعاملي الانكسار والتوهين (n, k) وعلى التوالي. اوضحت النتائج بان الطلاء المضاد للانعكاس المحضر من طبقة واحدة يمتلك نفاذية عالية وانعكاسية واطئة تشمل منطقتين من الطيف المرئية والحمراء القريبة وان معامل الانكسار يتراوح بين (1.05 - 1.25( في حين كانت اسماك الاغشية المحضره تتراوح بين )34.5 - 141.6 ) نانومتر, كذلك اوضحت صور (AFM) بان الحجم الحبيبي يتراوح ضمن المدى (86.55 - 94.81) نانومتر. | In this work design and fabricated antireflection coating (AR’C) with single layer. Design of the AR’C was based on the characteristic matrix method with quarter and non - quarter optical thickness. The effect of deposited material at normal incident of light was taken into account and the reflection performance was computed with the aid of MATLAB over the visible and near infrared region. Results show that wideband AR’C was achieved when deposited thin film of MgF2 on glass with non - quarter optical thickness less 0.7L related to geometrical thickness (34.5,36.9,78.3 nm) at room temperature. Also wideband AR’C achieved with non quarter 1.2L optical thickness deposited related to geometrical thickness (141.6nm) at annealing temperature. However results accept significant importance to estimate the optimum thickness before preparation stage. In this study antireflection coating fabricated by using pulsed laser deposition technique (PLD) which deposit MgF2film on glass substrate. Q - switching Nd : YAG laser beam with second harmonic generation (SHG) technique of wavelength 1064 nm and 532 nm, repetition rate 1 - 6 Hz and the pulse duration 10 ns was used. The film thickness, structural behavior and grain size dependent on that prepared conditions which include variation number of shot (150,250,350,450 pulses) have been studied.The thicknesses of MgF2 nanostructure films were measured using Lipsometre. Further, the experimental results shows high transmittance, wideband low reflection and the refractive index within the range (1.05 - 1.25), while the thicknesses are (34.5 - 141.6 nm). Atomic force microscope (AFM) image illustrate that the grain size of the film within the range (86.55 - 94.81) nm

تحضير درع متعدد الطبقات وحساب عامل التراكم باستخدام انواع مختلفة مم البوليمرات == Multilayered Shielding Preparation and Buildup Factor Calculation Using Different Type of Polymers

اسم المؤلف: زهير سالم خميس
اسم المشرف: محمد قاسم الفخار | حارث ابراهيم جعفر
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: واسط
الصفحات الاولى:
المستخلص: Due to the possibility of producing secondary radiation when a radiation is being attenuated by a certain type of radiation shield, the use of multilayer shielding appears very useful. This study aims to investigate the use of multilayer materials as nuclear radiation shielding.The work presented in this thesis focuses on the possibility of using polymer materials as a nuclear shield. This polymer (high density polyethylene and epoxy) is chosen due to different reasons among which are its local availability, the ease of mixing additives with it, light weight, and flexibility. The polymer as a single shield was investigated, where five different forms of the polymer were used as a single shield. These kind of shield are polymer (High Density Polyethylene HDPE, and Epoxy) alone, HDPE with a 38%by weight of Pb (as an additive), Epoxy with a 33%by weight of Pb, and Epoxy with a 33% by weight of Al (as an additive). The attenuation coefficient (μ), and buildup factor (B) were measured for all five forms and composition. In particular, the attenuation coefficients were found to increase with the increasing of the Pb or Al additive and decrease with gamma rays energy increase, while the buildup factor where decrease with the increase of the Pb or Al additive and increase with the increasing of energy.On the other hands, the multilayer shielding materials were chosen to be either Al or Pb slides (with different thickness) with a slide of 2.8cm of polymer (HDPE or Epoxy) in different repeated combinations. In order to evaluate the values of μ and B for this multilayer composition, the values of μ and B for each Pb and Al were evaluated. Then these two values were estimated for the different combinations of the multilayer shields. In particular, it was found that placing the low Z material (polymer) in front of the detector [NaI(Tl) detector] first and then high Z material before that

تقييم المقاطع العرضية لليورانيوم للتفاعلات المستحثة بالنيوترون == Cross Sections Evaluation of Uranium for Neutron Induced Reactions

اسم المؤلف: روناك اكرام علي
اسم المشرف: ايمان طارق العلوي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: لقد تم في هذا البحث حساب قيم المقاطع العرضية لنظائر اليورانيوم (A=230 - 238) للتفاعلات المستحثة بالنيوترونات التالية ,,,(n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), (n,γ), (n,p), (n,t), (n,d), (n,α), (n,2α),and (n,2p)المقاسة بفترات مختلفة من الطاقة حيث ان هذه القراءات تم اخذها من الوكالة الدولية للطاقة الذرية (IAEA ) ومن المكتبات المشهورة عالميا مثل EXFOR, CINDA, ENDF, JEFF, JENDL,ROSFOND,CENDL,WIND, TENDL, BROND, IRDF, EAF وقد تم قياسها في الفترة الاولى من منتصف القرن الماضي وحتى اخر سنوات الماضية .لقد تم تحليل المديات الكاملة للطاقة لكل تفاعل وقد تم اعادة حساب وتقييم المقاطع العرضية ضمن فترات صغيرة مختلفة حسب مديات الطاقة للنيوترون القاصف مع الاخطاء المرافقة لها. قد تم وضع صيغ رياضية لمتعددة الحدود في معظم التفاعلات والتي تربط بين تغيير المقطع العرضي مع الطاقة والتي يمكن استخدامها للتنبىء بقيم المقاطع العرضية غير المحسوبة. لقد تم حساب قيمة Q - للتفاعل وطاقة الربط وطاقة العتبة وفرق الكتلة وعامل الرص لكل تفاعل ولكل عنصر هدف. ان التقييمات اعتمدت بشكل رئيسي على حسابات نموذج الجهد البصري لقد اعتمدت الحسابات على معاملات الجهد البصري النووي حيث تم اختيار وجمع المعلومات من مكتبة (RIPL) التابعة للوكالة الدولية للطاقة الذرية. لقد قمنا بدراسة صيغتين مختلفتين لنموذج الجهد البصري حيث ان الصيغة الاولى تسمى نموذج الجهد البصري القياسي والمعاملات ماخوذة من مكتبة Beijing والصيغة الثانية لنموذج الجهد البصري قد تم حسابها بتحديد ثلاث مديات طاقية. لقد قمنا بدراسة نسبة التفاعل (n,f) لكل نظير من نظائر اليورانيوم نسبة الى يورانيوم - 235 والذي يعتبر نموذج قياسي. لقد قمنا بحساب هذه النسبة لجميع التفاعلات المتوفرة لدينا وليس فقط تفاعل الانشطار واحتسبناها نسبة الى يورانيوم - 235.حساب اخر تم اضافته الى هذه الدراسة وهو دراسة تاثير التلوث لوليدة اليورانيوم - 237 والتي هي نبتونيوم - 237 بعمر نصفي 6.8 يوم وكذلك حساب الفيض النيوتروني لكل منهما. | The cross sections of Uranium isotopes (A=230 - 238) for the (n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), (n,γ), (n,p), (n,t), (n,d), (n,α), (n,2α),and (n,2p) reactions are calculated with different energy intervals which are collected from International Atomic Energy Agency (IAEA). The available cross sections data for the reactions mentioned above are collected from the well known international libraries like EXFOR, CINDA, ENDF, JEFF, JENDL, ROSFOND, CENDL, WIND, TENDL, BROND, IRDF, EAF and measured during the period from the middle of the last century up to several years ago.The cross sections are reproduced in fine steps of incident neutron energy in different intervals with the corresponding errors. The recommended cross sections for all available experimental data have been calculated for all considered reactions mathematical representative equations for all these reactions are formulated. These equations represent the variation of the cross section with energy, which could be used to predict the values of uncalculated cross sections.Q - value, threshold energy, binding energy, mass excess, and packing fraction for each reaction and target element have been also calculated.The evaluations are based mainly on the calculations of the optical model potential. The calculations are based on the nuclear optical potential, where the relevant parameters are collected and selected from Reference Input Parameter Library (RIPL) which is being developed under the international project coordinated by the International Atomic Energy Agency (IAEA). We study two different formula for optical model potential the first formula is the standard optical potential model and its parameters are taken from Beijing library. The second formula is the optical potential with different energy ranges. We study the ratio of the (n,f) cross sections for each Uranium isotopes relative to (n,f) cross section for U - 235 which could be considered as a standard sample. We have done the ratio not for the (n,f) cross sections only but also for other reactions like ,(n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), and (n,γ) relative to U - 235 reactions cross sections.Another evaluation is added to cross sections is the effect of the contamination of the daughter of U - 237 which the daughter is Np - 237 6.8day and their relative flux
1 ... 76 77 78 79 80 ... 179