عرض: 25 50 75 100 النتائج

نتائج البحث: 25 من أصل 24,105

دراسة تحليلية للحام بالليزر على الخواص الحرارية - الميكانيكية للبوليمرات باستخدام برنامج ANSYS Analysis Study of Laser Welding on Thermal - Mechanical Properties of Polymers Using ANSYS Program

اسم المؤلف: زينه يونس علي
اسم المشرف: خالد هادي مهدي العبيدي ندى فاضل توفيق
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: الخلاصةان الهدف من هذه الدراسة, هو التنبؤ بسلوك المواد من حيث الخصائص التركيبية ,الحرارية والميكانيكية اثناء عملية اللحام في 3 - D. ان دراسة الخصائص التركيبية للمادة قد تم باعتبارها دالة لدرجة حرارة الانتقال الزجاجي T_g, ودرجة حرارة الانصهار T_m, وتغير الطور بينما يتم دراسة الخصائص الحرارية وفقا لتوزيع درجات الحرارة, والتدرج الحراري, والفيض الحراري, واخيرا يتم دراسة الخواص الميكانيكية بواسطة الاجهاد والمطاوعة.لقد تم تبني طريقة FEM لمحاكاة عملية اللحام لقطعتين متشابهتين ومختلفتين من مادة البولي بروبلين والبولي ستيرين في ثلاثة ابعاد. ان تحليل الخصائص الحرارية والميكانيكية لبوليمر البولي بروبلين والبولي ستيرين قد تم بدلالة كل من نموذج الحالة المستقرة والنموذج المتنقل باستخدام برنامج ((ANSYS 11. حيث ربط نموذج الحالة المستقرة (اعتبرت انها الحمل الابتدائي) مع نموذج الحالة المتنقلة بافتراض وجود الحمل الحراري والميكانيكي سوية بنفس الوقت على اعتبار ثبوت سرعة اللحام عند20ملي/ثانية ودرجة الحرارة عند 298م, وكذلك تم اختبار تاثير قدرة الليزر باستخدام ثلاثة قيم 50) (150,100 واط, كذلك درست تاثير نصف قطر بقعة الليزر على خصائص البوليمرات المستخدمة.بينت النتائج العددية قابلية لحام كل من المادتين البولي بروبلين والبولي ستيرين بهذه الطريقة, حيث لوحظ تناقص التشوهات الحرارية والميكانيكية الناجمة عن اللحام, كما يشير الشكل الهندسي هذه الاجهادات الى جودة اللحام. وبينت الدراسة ان كل من الفيض الحراري والانحدار الحراري يكون عند اعظم قيمها في اتجاه y - axis وهو اتجاه تسليط الليزر, وكانت درجة الحرارة العظمى في لحام كل من PP - PPو PP - PS هي ((351.4kو (425.9k) على التوالي. اما الاجهادات الميكانيكية فقد كانت واطئة في كل من PP - PPو PP - PS بحدود (0.181*〖10〗^9MPa ) و(0.166*〖10〗^9MPa) والمطاوعة (0.171) و(0.142) لكل من PP - PP وPP - PS على التوالي. واخيرا، لوحظ صغر مساحة المنطقة المتاثرة حراريا اذ كانت بحدود (9.2 〖mm〗^2) بالنسبة ل PP - PP، في حين اظهر عمق الاختراق تحسن مقارنة مع الاساليب المستخدمة، حيث كانت قيمته بحدود (2.5mm), اما في نموذج المتنقل فقد لوحظ تضاعف المساحة المتاثرة وعمق اختراق قريب من نتائج النموذج المستقر. | The aims of this study is to estimate the material behavior properties in terms of its structure, thermal and mechanical properties during welding process in 3 - D. The structure is studied as a function of T_m , T_g and phase change. While the thermal is investigated according to thermal distribution, thermal gradient and thermal flux. Finally the mechanical is examined by stress and strain.Finite element method is adopted to simulate welding process of two similar and dissimilar pieces of polypropylene and polystyrene in 3 - D.The analytical of thermal and mechanical properties is done in terms of steady - state model and transient model using ANSYS 11 program, then coupling the steady - state with transient model by supposed existing thermal and mechanical loads together in same time. Laser power effect on welding is investigated by three powers (50,100,and 150watt) and by laser spot radius (1mm, and 2mm), the welding speed is supposed constant at (20mm/sec).Numerical results show that the ability of this method to joined polymers material PP and PS, where it is noticed that the thermal and mechanical deformations are reduced, also the geometry shape of welding zone is indicated to a good quality of welding.From this study, the thermal gradient and thermal flux are at their maximum values at y - axis, in which the laser direction, and T_max in PP - PP and PP - PS joints are (351.4k) and (425.9k) respectively. Mechanical stresses and strains had low values, about (0.181*〖10〗^9MPa) and (0.166*〖10〗^9 MPa) and strain are about (0.171) and (0.142) for PP - PP and PP - 1PS joint respectively.Finally, it is observed that narrow HAZ area (9.2〖mm〗^2) of PP - PP joint, while penetration depth shows improvement comparing with usual methods, it's value is (2.5mm). In transient model it observes that multiples of HAZ area, and D_p is near its value in steady - state model.

الاستقرارية الفيزيائية - الكيميائية للمتراكبات PVA - MnSO4.H2O مع الظروف الجوية Physico - Chemical Stability of (PVA - MnSO4.H2O) Composites against weather conditions

اسم المؤلف: زينب كاظم حمزة
اسم المشرف: اسرار عبد المنعم سعيد
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الدراسه تم تحضير افلام بولي فينيل الكحول وكبريتات المنغنيز المائي باستخدام تقنية الصب مع نسب وزنية مختلفة وهي (2, 5, 10, 15) من كبريتات المنغنيز المائي وقد تم دراسة الخصائص البصريه لها.وقد تضمن هذا العمل ايضا دراسة تاثير الظروف الجوية على الخصائص البصرية لكل النماذج المعرضة.كل النماذج المعرضة وغير معرضة للظروف الجويه شخصت بطرق مختلفة مثل التحليل الطيفي لاشعة تحت الت الحمراء (FTIR)وصور المجهر الضوئي.اظهرت النتائج التجريبية ان طيف الامتصاصيه يزداد بزيادة تركيز كبريتات المنغنيز المائي. فجوة الطاقة تقل بزيادة تركيز الاضافة. وقد تم دراسة الثوابت البصرية الاخرى والتي تشمل (معامل الامتصاص, معامل الخمود, معامل الانكسار, ثابت العزل الحقيقي والخيالي).بعدتعريض النماذج للبولي فينيل الكحول النقي وللمتراكبات (PVA - MnSO4.H2O) وبتراكيز مختلفه وجد ان طيف الامتصاص يزداد بزيادة فترة التعريض. فجوة الطاقه تقل بزيادة فترة التعريض. وقد تم دراسة الثوابت البصريه الاخرى والتي تشمل (معامل الامتصاص, معامل الخمود, معامل الانكسار, ثابت العزل الحقيقي والخيالي).وقد بين طيف (FTIR) عدم وجود تفاعل كيميائي بين المادة المضافة والبوليمر وليس هنالك تكسر بالاواصر الاساسيه لهما بعد التعريض للظروف الجوية, واظهرت صور المجهر الضوئي ان كل النماذج تصبح اكثر خشونة بعد التعريض. | In this study, (PVA - MnSO4.H2O) films are prepared by using casting technique with different concentration of Manganese (II) sulfates monohydrate (2, 5, 10 and 15) wt.% . Also the optical properties is studied, and this work is involved with study the effect of weathering condition of optical properties for all samples which exposure. All the samples that exposure and unexposure to weather conditions have diagnosed by different methods such as fouirer transform infrared spectroscopy (FTIR) and optical microscope images. The experimental results show that the absorption spectrum increased with increasing the concentration of (MnSO4.H2O). The optical energy gap decreasing with increasing of the concentration of the additive. The optical constants (absorption coefficient, extinction coefficient, refractive index, real and imaginary dielectric constants) are studied. After exposure the samples in the form of pure PVA and (PVA - MnSO4.H2O) composites with different concentration found that the absorption spectrum increases with increases exposure time. The optical energy gap decreasing with increasing exposure time. The optical constants (absorption coefficient, extinction coefficient, refractive index, real and imaginary dielectric constants) are studied. The FTIR shows no chemical interaction between the Polymer and the additives and there are no broken fundamental bands after exposure to the weather conditions. Morphological photographs illustrate that the surface of all films become more roughness after exposure.

تصميم وتصنيع الطلاء المضاد للانعكاس معتمدين طريقة الليزر النبضي في الترسيب DESIGN AND FABRICATION OF ANTI REFLECTION COATING BY PULSED LASER DEPOSITION

اسم المؤلف: زينب حازم عبد الرحيم
اسم المشرف: الاء نزار عبد الغفار كاظم عبد الواحد عادم
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا العمل تم تصميم طلاء المضاد للانعكاس بسمك ربع ولاربع طول موجي ودراسة خصائص بصرية للاغشية الرقيقة والاستفادة منهما في تصنيع طلاء مضاد للانعكاس ضمن المنطقة المرئية والحمراء القريبة . اعتمد تصميم الطلاء على مفهومين اساسيين هما نظرية المصفوفة المميزة وتصميم طلاء بسمك ليس ربع طول موجي ولحالة السقوط العمودي للضوء.اخذين بنظر الاعتبار ظاهرة التشتت. تم دراسة نفاذية وانعكاسية الطلاء كدالة للتغير في الطول الموجي للضوء الساقط باستخدام الرزمة البرمجية MATLAB. اوضحت نتائج التصميم امكانية الحصول على انعكاسية واطئة لمدى واسع من الطيف الكهرومغناطسي يشمل المنطقة المرئية ومنطقة الحمراء القريبة عندما يكون السمك البصري ضمن المدى اقل 0.7L لمادة MgF2 المرسبة على الزجاج ويكافي الاسماك الهندسية للغشاء (34.5,36.91,78.3) نانومتر, وامكانية الحصول على انعكاسية واطئة لمدى واسع في درجة حرارة التلدين عند سمك البصري 1.2L ويكافى السمك الهندسي ((141.6 نانومتر. تكتسب هذه النتيجة اهميتها في امكانية تخمين السمك الامثل قبل البدء بمرحلة التحضير حيث اشارت النتائج الى معادلة تجريبية تربط بين عدد النبضات وسمك الغشاء. لغرض تصنيع الطلاءالبصري, تم استخدام طريقة الترسيب بالليزر النبضي لليزر النيديميوم - ياك1064 نانومتر الذي يعامل بتقنية التولد المتوافق الثاني بطول موجي 532 نانومتر والذي يعمل بتقنية عامل النوعية بمعدل تكرارية (1 - 6) هرتز وامد نبضة 10 نانوثانية. لتحضير اغشية فلوريد المغنيسيوم المرسبة على الزجاج, قمنا بدراسة ظروف التحضير التي تتضمن التغير بعدد النبضات (150و250 و350و 450 نبضة) لترسيب اغشية فلوريد المغنيسيوم ومدى تاثيرهم على سمك الاغشية المحضرة وتركيبها وحجم الحبيبات وبالتالي على نفاذيته ومدى امكانية استخدامه كطلاء مضاد للانعكاس. لقياس سمك الاغشية المحضرة, تم استخدام جهاز مقياس اللبسومتر وتم استخدام جهاز المطياف لايجاد النفاذية والانعكاسية والثوابت البصرية ومعاملي الانكسار والتوهين (n, k) وعلى التوالي. اوضحت النتائج بان الطلاء المضاد للانعكاس المحضر من طبقة واحدة يمتلك نفاذية عالية وانعكاسية واطئة تشمل منطقتين من الطيف المرئية والحمراء القريبة وان معامل الانكسار يتراوح بين (1.05 - 1.25( في حين كانت اسماك الاغشية المحضره تتراوح بين )34.5 - 141.6 ) نانومتر, كذلك اوضحت صور (AFM) بان الحجم الحبيبي يتراوح ضمن المدى (86.55 - 94.81) نانومتر. | In this work design and fabricated antireflection coating (AR’C) with single layer. Design of the AR’C was based on the characteristic matrix method with quarter and non - quarter optical thickness. The effect of deposited material at normal incident of light was taken into account and the reflection performance was computed with the aid of MATLAB over the visible and near infrared region. Results show that wideband AR’C was achieved when deposited thin film of MgF2 on glass with non - quarter optical thickness less 0.7L related to geometrical thickness (34.5,36.9,78.3 nm) at room temperature. Also wideband AR’C achieved with non quarter 1.2L optical thickness deposited related to geometrical thickness (141.6nm) at annealing temperature. However results accept significant importance to estimate the optimum thickness before preparation stage. In this study antireflection coating fabricated by using pulsed laser deposition technique (PLD) which deposit MgF2film on glass substrate. Q - switching Nd : YAG laser beam with second harmonic generation (SHG) technique of wavelength 1064 nm and 532 nm, repetition rate 1 - 6 Hz and the pulse duration 10 ns was used. The film thickness, structural behavior and grain size dependent on that prepared conditions which include variation number of shot (150,250,350,450 pulses) have been studied.The thicknesses of MgF2 nanostructure films were measured using Lipsometre. Further, the experimental results shows high transmittance, wideband low reflection and the refractive index within the range (1.05 - 1.25), while the thicknesses are (34.5 - 141.6 nm). Atomic force microscope (AFM) image illustrate that the grain size of the film within the range (86.55 - 94.81) nm

الخواص التركيبية والبصرية والكهربائية لاغشية اوكسيد النيكل المحضرة بطريقة الترذيذ كمتحسس غازي The structural, optical and electrical properties of NiO films prepared by RF - Sputtering as gas sensor

اسم المؤلف: زينب طارق عبد الحميد
اسم المشرف: قاسم عزيز محمد محمد عبد النبي
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The structural, optical, electrical, and gas sensing properties of nickel oxide have been studied. The structural properties of the deposited films were made using XRD, SEM and AFM. The NiO films have been prepared with different thicknesses (100, 150 and 200) nm on glass, Si and Al2O3 substrates, using RF - sputtering at 100°C substrate temperature. The electrical and optical parameters of the NiO films were characterized using Hall Effect and transmittance measurements.The X - ray diffraction result indicates that the films are of polycrystalline in nature with cubic structure. The grain size of the nanoparticales observed at the surface depended of films thicknesses, where 200 nm has smallest average grain size 85.5 nm and RMS increased with increasing of thicknesses.The optical characterization shows that the film has band gap that ranged in between 3.6 eV to 3.9 eV, the average transmittance of films was found to be ranged of 60% to 85% in the VIS - IR regions. The dark conductivity of NiO films has been studied as a function of film thickness, crystal structure transformation and temperature with particular regard to gas sensitivity in CO2, NO2, CO, NO and the ethanol vapor. The electrical properties were found to be dependent on the film thickness.I - V characteristics for NiO films at (air, vacuum, N2, O2andCO2) gases before and after annealing were investigation. It would appear from our result that the diminution of the dark conductivity after annealing may be due to the surface contaminations adsorbed on the surface of the NiO film during film preparation or from ordinary atmospheric air.The resistivity of the NiO thin films decreased with increasing of thicknesses, from 1.5x105 to 5.4x104 (Ω.cm), which is related to the increase of carrier concentration with film thickness. The results of measurements of NiO thin films show that these films have good conductivities and results obtained from Hall Effect indicate that the NiO films were (p - type).It was found that the sensitivity to other gases differs for different film thicknesses and working temperature. Furthermore, NiO films exhibits high and fast response to NO2 gas at 200°C, which makes it a promising candidate for a poisonous gas sensing.

تصميم وتصنيع طلاء بصري مضاد للانعكاسية متعدد الطبقات لمجمعات الطاقة الشمسية الحرارية ذات التزجيج الملون Design and Fabrication of Optical Multilayer Anti - reflection Coating for Colored Glazed Thermal Solar Collectors

اسم المؤلف: زينب ارحيم حسين الاسدي
اسم المشرف: عبد الحسين خضير لطيف امال محمد الحلو
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: فيزياء الطاقة الشمسية
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يلعب الجانب الجمالي للمجمعات الشمسية الحرارية دورا هاما في تكامل واجهات المباني ويستند المظهر الملون الى مبدا التداخل لطلاء الاغشية الرقيقة على الجانب الاخر من الغطاء الزجاجي . ان وجود طبقات متعددة للمرشحات البصرية التداخلية على المجمعات المزججة يمكن ان ينتج انعكاس ملون في المنطقة المرئية ولا يحدث المظهر الملون خسائر مفرطة للطاقة بينما ينفذ الجزء غير المنعكس في منطقة الاشعة تحت الحمراء القريبة داخلا على شريط الامتصاص لزيادة كفاءة المجمع الشمسي الحراري . تقدم هذه الدراسة فكرة بسيطة للحصول على تزجيج ملون لاخفاء اللون الاسود والانابيب الظاهرة وتموجات شريط الامتصاص المعدني للمجمعات الشمسية الحرارية والتي تعتبر عقبة اساسية في تكامل المجمعات الشمسية الحرارية كواجهات للمباني وذلك بتصميم طبقات متعددة لمرشحات بصرية تداخلية من خلال محاكاة نظرية ومن ثم تصنيع هذه التصاميم عمليا ومقارنة النتائج عمليا ونظريا . تـم توظيـف مواد عازلة ملائمـة مثـل ثنائـي اوكسيد السليـكون (SiO2)ذو معامـل الانكسار العالـي nH =1.47 ومغنيسيوم فلورايد (MgF2) ذو معمل الانكسار الواطيء nL =1.38 وبسمك ربع طول موجي (H) و(L) لمعامل الانكسار العالي والواطيء على التوالي . استخدام برنامج الماتلاب في جزء المحاكاة النظري والذي صمم لهذه الدراسة . تم تصميم نموذجين بصريين كما تم استخدام نوعين من القواعد الزجاجية . ان اول نموذج بصري هو HL//glass لقيمتين من الطول الموجي المستخدم للتصميم (0) = 558 نانومتر و700 نانومتر ومن 2 - 40 طبقة . تم استخدام نوعين من القواعد الزجاجية ، النوع الاول شريحة زجاج مجهرية ذات معامل انكسار 1.5131 استخدم في هذا النموذج البصري طولين موجيين للتصميم 0 = 558 نانومتر و700 نانومتر ، النوع الثاني من القواعد الزجاجية هو BK7 ذو معامل الانكسار 1.515 استخدم في هذا النموذج البصري عندما طول موجة التصميم 0 = 700 نانومتر . النموذج البصري الثاني LH//glass تم باستخدام قاعدة زجاجية لشريحة مجهرية ولطول موجة التصميم واحد وهو 0 = 558 نانومتر من 2 - 40 طبقة . هذه التصاميم صنعت عمليا باستخدام تقنية الترذيذ بالتردد الراديوي ذو المغناطيس المستوي ، عشر طبقات رسبت بالتعاقب على شريحة زجاجية مجهرية من (SiO2) ذو معامل الانكسار العالي (H) و(MgF2) ذو معامل الانكسار الواطيء (L) على التوالي للتصاميم البصريةHL//glass وLH//glass عند طول موجة التصميم 0 = 558 نانومتر . كذلك عشر طبقات رسبت على القاعدة الزجاجية BK7 للنموذج البصري HL//glass عند 0 = 700نامومتر ولكن عند استخدام القاعدة الزجاجية للشريحة المجهرية للنموذج البصري HL//glass عند 0 = 700 نانومتر رسبت 16 طبقة من هاتين المادتين العازلتين . اظهرت المحاكاة الحاسوبية السلوك البصري لهذه المرشحات من 2 - 40 طبقة ولاعداد فردية وزوجية من الطبقات مثل الانعكاسية المرئية (Rvis.) ، الانعكاسية الشمسية (Rsol.) ، اعظم قمة لمنحني طيف الانعكاسية في المنطقة المرئية (RMax.) ، النفاذية الشمسية (Tsol.) وعامل الجدارة (M) . عمليا تم حساب (RMax.) و(Rsol.av.) و(Tsol.av.) . ان التحدي في هذه الدراسة هو ايجاد افضل نموذج بصري يمتلك اقل انعكاسية شمسية (Rsol.) واعظم نفاذية شمسية (Tsol.) لزيادة كفاءة المجمع الشمسي الحراري وفي نفس الوقت الحصول على انعكاس ملون يكسب المجمعات الشمسية الحرارية التي تستخدم كواجهات للابنية جانب جمالي . لقد وجد عمليا ان التصميم البصري الثاني (L/H//microscopic glass slide) عند0 = 558 نانومتر يمتلك اقل (Rsol.) واعلى (Tsol.) من البداية عند طبقتين حتى الوصول الى الطبقة العاشرة والتي تمتلك (Rsol.) =18.56025 % و(Tsol.) = 81.33469 % لذلك يمكن اعتبار هذا النموذج هو افضل نموذج بصري يمتلك اعلى كفاءة شمسية حرارية ويظهر انعكاس ملون (اخضر) جيد . لكن يعتبر عمليا النموذج البصري الاول (H/L//microscopic glass slide) عند0 = 700 نانومتر هو افضل نموذج بصري يستخدم للتلوين . ان المرشحات البصرية التداخلية متعددة الطبقات تظهر في هذه الدراسة انعكاس ملون اخضر في المدى المرئي ونفاذية مقبولة ومنطقة مضادة للانعكاسية في مدى الاشعة تحت الحمراء القريبة . بالرغم من زيادة طول موجة التصميم(0) عمليا من 558 الى 700 نانومتر تبقى هذه المرشحات تظهر انعكاس ملون اخضر .نجحت هذه الدراسة منذ البداية في اظهار ان الطلاء الترذيذي متعدد الطبقات حقق المتطلبات التالية : ا - امتصاصية شبه صفرية .ب‌ - قمة انعكاسية لونية في المنطقة المرئية .ت‌ - نفاذية شمسية مقبولة . | An aesthetic aspects play an important role in facades integration buildings of the thermal solar collectors , the principle of the colored appearance is based on interference in the thin - films coating on the reverse side of the cover glass . The presence of multilayered optical interference filters on the collector glazing can produce a colored reflection in the visible region , the colored appearance should not cause excessive energy losses , while transmitting the non - reflected radiation in the near IR region entirely to the absorber sheet to increase the efficiency of the thermal solar collector . This study presents simple idea to get a colored glaze to hide the black color, and the visibility of tubes and corrugations of the metal sheet (absorber) of the thermal solar collectors which is considered the main obstacle to facade integration buildings of solar thermal collectors by designing a multilayer optical interference filters during theoretical simulation and fabricate these designs experimentally then compare the theoretical and experimental results . Appropriate dielectric materials, silicon dioxide (SiO2) of high refractive index nH =1.47 and magnesium fluoride (MgF2) of low refractive index nL =1.38 were employing with quarterwave thicknesses (H) & (L) for high and low refractive index layers respectively . In theoretical simulation part a matlab program has been used which was designed for this study . Two optical models were designed and two kinds of glass substrates were used . The first optical model is HL//glass , for two design wavelength values (0) 558 nm and 700 nm from 2 - 40 layers . Two types of glass substrate were used , the first one was microscopic glass slide substrate with refractive index 1.5131 , it was used in this optical model two types of design wavelength (0) = (558 & 700) nm , the second kind of glass substrates was BK7 (Borosilicate Crown) glass with refractive index 1.515 it was used in this optical model when the design wavelength 0=700 nm . The second optical model is LH//glass by using microscopic glass slide substrate for one design wavelength is 0= 558 nm and for 2 - 40 layers. These designs were fabricated experimentally by using RF planer magnetron sputtering technique , 10 layers for high refractive index (H) (SiO2) and low refractive index (L) (MgF2) were deposited alternately for the optical models HL//glass and LH//glass at 0= 558 nm on the microscopic glass slide . Also 10 layers were deposited on BK7 glass substrate for the optical model HL//glass at 0= 700 nm but by using microscopic glass slide substrate for the optical model HL//glass at 0= 700 nm there were 16 layers deposited from these two dielectric materials . The computer simulation exhibit the optical behavior of this filters from 2 - 40 layers and for odd and even numbers of layers such as visible reflectance (Rvis.), solar reflectance (Rsol.), maximum peak of reflectance spectrum curve (RMax.) in the visible region , solar transmittance (Tsol.) and merit factor (M) . Experimentally (RMax.) , (Rsol.av.) and (Tsol.av.) were calculated . The challenge in this study is to find the best optical model which has less (Rsol.) and larger (Tsol.) to increase the efficiency of the thermal solar collector and in the same time get the colored reflection to gain esthetic aspect for the thermal solar collectors which was used as building facades . It is found experimentally that the second optical model (L/H//microscopic glass slide) at 0= 558 nm have low (Rsol.) and high (Tsol.) from the beginning at 2 layers until reaching the 10 layer which has (Rsol.)= 18.56025 % and (Tsol.)= 81.33469 % , therefore this model can be considered as the best optical model which has higher solar thermal efficiency and exhibits good )green( colored reflection . But the first optical model (H/L//microscopic glass slide) at 0= 700 nm was considered experimentally the best optical model used for coloration . The multilayer optical interference filters in this study exhibit green colored reflectance in the visible range and acceptable transmission and antireflection region in near IR range . Despite the increase in design wavelength (0) from 558 nm to 700 nm . These filters experimentally remain exhibit green colored reflection . This study was succeeded at the first attempt to show that a sputtered multilayer coating can fulfilled the requirements

تحضير ودراسة الخصائص الامتصاصية لاكاسيد الفيرايت باستخدام طريقة السيراميك Preparation and Study the Absorption Properties of Ferrite Oxides using Ceramic Method

اسم المؤلف: زياد طارق اسماعيل العبوسي
اسم المشرف: كاظم جواد كاظم الشجيري
الموضوع العام: علوم الفيزياء
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Compounds of ferrimagnetic materials were prepared in this work in order to investigate and evaluate the microwaves absorption at X - band with the range of frequencies (8 - 12.5 GHz) and Ku - band with the range of frequencies (12.5 - 18 GHz). And the second band is used for the first time in Iraq.Conventional Ceramic techniques (the solid state reaction method) were used to prepare three compounds of spinel ferrite : Cu - Zn ferrite, with formula (Cu1 - xZnxFe2O4), Mg - Zn ferrite, with formula (Mg1 - xZnxFe2O4), and Ni - Zn ferrite, with formula (Ni1 - xZnxFe2O4) at values of x = (0.0, 0.1, 0.3, 0.4, 0.5, 0.6), where x is the proportion of zinc in the ferrite, as bulk (54) samples of rectangle in dimensions (22.6*10*10 mm) within in X - band refine it to make its dimensions (15.5× 7.5×10) mm within in the Ku - band.The resonance peaks of three types of spinel ferrite appeared at the frequencies (9, 10, 11, 14, 15, 16, 17) GHz, and these peaks remain at the same frequencies with a different thickness for all types of ferrite, this indicates that the peaks are not related to thickness.For all samples it was found that the effect of increase the thickness and sintering temperature increased the values of attenuation and absorbance. And the best values of the absorbency were in the range of (Ku - band).The value of total transmission and the absorbance is 100% for sample of (Ni0.9Zn0.1Fe2O4) were the best values at (1050) °C then (14) GHz.The best results were obtained in this research, and the best values of absorbance and stability are (CuFe204, Cu0.9Zn0.1Fe2O4, Cu0.9Zn0.1Fe2O4,Cu0.4Zn0.6Fe2O4) that had been burned by (1000, 1050, 1100, 1050) respectively. These samples were range of (Ku - band).The best result was similarity in behaviour of absorbance for the sample (Mg0.6Zn0.4Fe2O4) at the range (X - band).X - ray diffraction results showed that the structure was polycrystalline for all samples and for all (X) values.The density of samples greatly depends on the temperature of sintering, witch increases proportionally with the temperature of the sintering

تراكيز النويدات الطبيعية والصناعية في نماذج بيئية مختلفة لمدينة العمارة - محافظة ميسان Natural and Artificial Radionuclide Concentrations for different Environmental Samples in AL - Amara city - Missan Governorate

اسم المؤلف: زهراء عبد الحسين اسماعيل السوداني
اسم المشرف: خالد هادي مهدي العبيدي
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: فيزياء التلوث البيئي
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: الهدف من هذه الدراسة يتضمن جزئين الجزء الاول يتمثل بتقييم مستوى النشاط الاشعاعي الطبيعي والصناعي للعينات البيئية (تربة سطحية ,ومياه نهر دجلة , ومياه محطات التصفية ,ورواسب نهر دجلة) التي جمعت من مواقع مختلفة في مدينة العمارة - محافظة ميسان باستعمال تقنية مطيافية اشعة كاما مع كاشف الجرمانيوم عالي النقاوة (HPGe) ذي الكفاءة 40% وقدرة تحليل 1.8keV للطاقة 1.33MeV العائدة لنويدة الكوبلت - 60 وذلك لقياس الفعالية النوعية لليورانيوم - 238والثوريوم - 232 والبوتاسيوم - 40 والسيزيوم - 137 للوقوف على المستويات الاشعاعية, فضلا عن حساب مؤثرات الخطورة الاشعاعية لاشعة كاما (فعالية الراديوم المكافئة (Raeq),ومعدل الجرعة الممتصة في الهواء(Dɣ),والجرعة الفعالة السنوية للتعرض الخارجي (〖AEDE 〗_out) والداخلي (〖AEDE 〗_in),ودليل الخطورة الخارجي(Hex) والداخلي (Hin),ودليل الخطورة لاشعة كاما I_γ))) في النماذج البيئية المذكورة انفا.وقد بينت نتائج الدراسة الحالية ان معدلات الفعالية النوعية لليورانيوم - 238 والثوريوم - 232 والبوتاسيوم - 40 والسيزيوم - 137 ومعدلات مؤثرات الخطورة الاشعاعية لاشعة كاما في العينات البيئية كانت جميعها اقل من الحد المقبول به عالميا.اما الجزء الثاني من هذه الدراسة هو قياس تراكيز غاز الرادون في العينات البيئية (تربة سطحية ,ومياه نهر دجلة ,ومياه محطات التصفية ,ورواسب نهر دجلة ,وهباء الهواء) التي جمعت من مواقع مختلفة في مدينة العمارة - محافظة ميسان ,وذلك باستعمال تقنية كواشف الاثر النووي للحالة الصلبة نوع (CR - 39),فضلا عن حساب مؤثرات الخطورة الاشعاعية لغاز الرادون (محتوى الراديوم الفعال (CRa) ,و معدل الانبعاث الكتلي للرادون (EX(M)) ,و معدل الانبعاث السطحي للرادون (EX(S)) ,و مؤشر الفا (Iα) ,والرادون المذاب Cd)) ,و الجرعة الفعالة السنوية للرادون AEDw))) في النماذج البيئية المذكورة انفا.و بينت نتائج الدراسة الحالية ان معدلات تركيز الرادون - 222 في العينات البيئية كانت جميعها اقل من الحد المقبول به عالميا.يستنتج من هذه الدراسة ان بيئة مدينة العمارة هي ضمن الخلفية الاشعاعية الطبيعية . | The aim of this study includes two parts, the first part is to assessment level of natural and artificial radioactivity of environmental samples (surface soil, water of the Tigris River ,water filtering stations and sediments of the Tigris River) collected from various locations in AL - Amara city - Missan government using gamma - ray spectroscopy technique with High purity Germanium detector (HPGe) which has a photo peak relative efficiency of( ≥40 % ) and an energy resolution of (≤1.8 keV) for the 133 MeV gamma transition of 60Co to measure Specific activity concentration of 238U, 232Th, 40K and 137Cs, Also Evaluation of radiological hazard effects for Gamma ray (Radium Equivalent Activity (Raeq), Absorbed Dose Rate in Air (Dɣ), Annual effective dose outdoor (〖AEDE 〗_out) and Annual effective dose indoor(〖AEDE 〗_in), Hazard index outdoor )Hex( and Hazard index indoor) Hin (and gamma Index (I_γ)) In environmental samples listed above.The results of the present study have shown that the rates of Specific activity of 238U, 232Th, 40K and 137Cs and radiological hazard effects Rate for Gamma ray in environmental samples were all lower than the value of the global limit.The second part of this study is to measure the concentrations of radon gas in environmental samples (surface soil , water of the Tigris River, filtering water stations , sediments of the Tigris River and dust air) which collected from various locations in AL - Amara city - Missan government using Solid State Nuclear Track Detectors type (CR - 39), In addition to Evaluation of radiological hazard effects for Radon gas (Effective radium content (CRa), Mass exhalation rate for Radon ????????(????), Surface exhalation rate for Radon ????x(????), Alpha index (Iα), Radon dissolved )Cd) and Annual effective dose )AEDw)) In environmental samples listed above.The results of the present study have shown that the rates of radon - 222 concentration in environmental samples were all less than the global limit.We conclude from this study that the environment of Amara city is within normal background radiation.

تصنيع ودراسة خواص معدن - فثالوسيانين العضويه كمتحسس حرارة Fabrication and Study Properties of Organic Metal - Phthalocyanine as Temperature Sensor

اسم المؤلف: رؤى مثنى علي
اسم المشرف: ندى خضير عباس
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Copper Phthalocyanine tetrasulfonic acid tetrasodium salt (CuPcTs) thin films with different annealing temperatures (100, 150 and 200)oC have been prepared by spin coating technique on glass & ITO substrate with speed rate of 1000 rpm for 1 min, the obtain films have 100±5 nm thickness. This dissertation deals with different measurement techniques (Thermal, Structure, Morphological, Optical and Electrical measurements) in order to investigate the optimum condition to fabricate sensor device.The structures of CuPcTs thin films which deposited on glass substrate have been studied by X - ray diffraction (XRD), Atomic Force Microscope (AFM) and (FESEM) techniques, XRD studies show that thin films have polycrystalline structure for all annealing emperatures with perfect orientation (001). Also the surface morphology by AFM measurement for CuPcTs thin films has been studied; it shows that all films after heat treatment go to Nano size. The roughness decreases with increasing temperatures, and by (EDX) technique the elemental ratios of thin films are determined.The optical measurement showed that the as - deposited and annealed films have two peaks which are (B, Q1and Q2) bands, B in Ultra Violet region attributed to transition between d level for Cu metal and π* in LUMO, and Q bands in Visible region attributed to the transition between π(HOMO) - π* (LUMO). These measurements demonstrated that the energy gap of CuPcTs depends on the annealing temperatures, the photoluminescence spectra (PL) showed the traps inside energy gap play an important role and effect onoptical behavior. It’s studied to confirm the results of optical band gap, FTIR spectra give results about the bonds of (CuPcTs) and its position compared with H2Pc as a reference. The electrical properties of these films were studied with differentannealing temperature. Hall measurements showed by increasing thin films temperature the conductivity decreased at 100oC then it increase at 150oC finally it returned to decrease that may be due to phase transitions, all the films are p - type.CuPcTs Capacitive - Resistive surface type temperature device sensor has been fabricated by using two electrodes (Aluminum and Silver), the capacitive response of this sensor was observed by Raising the temperature gradually.Capacitive - Resistive temperature sensor showed that the response to variation of temperature in range (RT - 200)0C and the response time ≈ 20±5 Sec. for two electrodes, The fabricated sensor appear enough sensitivity and good response and recovery times and strong affected by frequency variation.Practical experience has shown results that aluminum electrode has capacitance and resistance higher than the silver electrode depending on the different frequencies values, while the silver electrode has the shortest response time.

تقييم المقاطع العرضية لليورانيوم للتفاعلات المستحثة بالنيوترون Cross Sections Evaluation of Uranium for Neutron Induced Reactions

اسم المؤلف: روناك اكرام علي
اسم المشرف: ايمان طارق العلوي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: لقد تم في هذا البحث حساب قيم المقاطع العرضية لنظائر اليورانيوم (A=230 - 238) للتفاعلات المستحثة بالنيوترونات التالية ,,,(n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), (n,γ), (n,p), (n,t), (n,d), (n,α), (n,2α),and (n,2p)المقاسة بفترات مختلفة من الطاقة حيث ان هذه القراءات تم اخذها من الوكالة الدولية للطاقة الذرية (IAEA ) ومن المكتبات المشهورة عالميا مثل EXFOR, CINDA, ENDF, JEFF, JENDL,ROSFOND,CENDL,WIND, TENDL, BROND, IRDF, EAF وقد تم قياسها في الفترة الاولى من منتصف القرن الماضي وحتى اخر سنوات الماضية .لقد تم تحليل المديات الكاملة للطاقة لكل تفاعل وقد تم اعادة حساب وتقييم المقاطع العرضية ضمن فترات صغيرة مختلفة حسب مديات الطاقة للنيوترون القاصف مع الاخطاء المرافقة لها. قد تم وضع صيغ رياضية لمتعددة الحدود في معظم التفاعلات والتي تربط بين تغيير المقطع العرضي مع الطاقة والتي يمكن استخدامها للتنبىء بقيم المقاطع العرضية غير المحسوبة. لقد تم حساب قيمة Q - للتفاعل وطاقة الربط وطاقة العتبة وفرق الكتلة وعامل الرص لكل تفاعل ولكل عنصر هدف. ان التقييمات اعتمدت بشكل رئيسي على حسابات نموذج الجهد البصري لقد اعتمدت الحسابات على معاملات الجهد البصري النووي حيث تم اختيار وجمع المعلومات من مكتبة (RIPL) التابعة للوكالة الدولية للطاقة الذرية. لقد قمنا بدراسة صيغتين مختلفتين لنموذج الجهد البصري حيث ان الصيغة الاولى تسمى نموذج الجهد البصري القياسي والمعاملات ماخوذة من مكتبة Beijing والصيغة الثانية لنموذج الجهد البصري قد تم حسابها بتحديد ثلاث مديات طاقية. لقد قمنا بدراسة نسبة التفاعل (n,f) لكل نظير من نظائر اليورانيوم نسبة الى يورانيوم - 235 والذي يعتبر نموذج قياسي. لقد قمنا بحساب هذه النسبة لجميع التفاعلات المتوفرة لدينا وليس فقط تفاعل الانشطار واحتسبناها نسبة الى يورانيوم - 235.حساب اخر تم اضافته الى هذه الدراسة وهو دراسة تاثير التلوث لوليدة اليورانيوم - 237 والتي هي نبتونيوم - 237 بعمر نصفي 6.8 يوم وكذلك حساب الفيض النيوتروني لكل منهما. | The cross sections of Uranium isotopes (A=230 - 238) for the (n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), (n,γ), (n,p), (n,t), (n,d), (n,α), (n,2α),and (n,2p) reactions are calculated with different energy intervals which are collected from International Atomic Energy Agency (IAEA). The available cross sections data for the reactions mentioned above are collected from the well known international libraries like EXFOR, CINDA, ENDF, JEFF, JENDL, ROSFOND, CENDL, WIND, TENDL, BROND, IRDF, EAF and measured during the period from the middle of the last century up to several years ago.The cross sections are reproduced in fine steps of incident neutron energy in different intervals with the corresponding errors. The recommended cross sections for all available experimental data have been calculated for all considered reactions mathematical representative equations for all these reactions are formulated. These equations represent the variation of the cross section with energy, which could be used to predict the values of uncalculated cross sections.Q - value, threshold energy, binding energy, mass excess, and packing fraction for each reaction and target element have been also calculated.The evaluations are based mainly on the calculations of the optical model potential. The calculations are based on the nuclear optical potential, where the relevant parameters are collected and selected from Reference Input Parameter Library (RIPL) which is being developed under the international project coordinated by the International Atomic Energy Agency (IAEA). We study two different formula for optical model potential the first formula is the standard optical potential model and its parameters are taken from Beijing library. The second formula is the optical potential with different energy ranges. We study the ratio of the (n,f) cross sections for each Uranium isotopes relative to (n,f) cross section for U - 235 which could be considered as a standard sample. We have done the ratio not for the (n,f) cross sections only but also for other reactions like ,(n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), and (n,γ) relative to U - 235 reactions cross sections.Another evaluation is added to cross sections is the effect of the contamination of the daughter of U - 237 which the daughter is Np - 237 6.8day and their relative flux

دراسة تاثير المعاملة الحرارية على الخواص التركيبية والميكانيكية لبوليمر (بولي تيترافلورواثيلين) Study the Effect of Heat Treatment on the Structural and Mechanical Properties for poly (tetrafluoroethylene

اسم المؤلف: رند باسم لطفي الكرخي
اسم المشرف: مي عبد الستار محمد نجيب
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: درس في هذا العمل نوعين من بولي تيترافلورواثيلين ( النقيين ولكن باختلاف الشركة المصنعة PTFE) (صيني _اماراتي ) بطريقه صب المحلول كافلام رقيقه واشرطة , بواسطه الخواص التركيبيه (حيود الاشعه السينيه ومسعريه المسح التفاضلي ) والخصائص الميكانيكية بدلاله درجات حراره مختلفة للدوره الحرارية . يبين كلا النوعين تغير في الشده المستطاره من المستوى القاعدي (100) عند تغير درجه حرارة الدورة الحرارية واظهر النوعين زيادة في التبلورية مع زياة درجة الحرارة .كذلك اختلاف في الانثالبي عند اختلاف درجات الحرارة حيث لوحظ زياة الانثالبي بزيادة درجة الحرارة واختلاف في الخصائص الميكانيكيه ( الاجهاد والانفعال عند نقطة الخضوع ونقطه الكسر ومعامل يونك) للبوليمر حيث اظهرت المعالجة الحرارية للبوليمر بدرجات حرارة مختلفة من اجل معرفة خصائصه ومقاومته الى الظروف البيئية ان الخواص الميكانيكية تزداد زيادة خطيا مع زيادة درجة الحرارة .لوحظ بان انتاج الشركه المصنعة الصينية افضل من ناحية النتائج لايجاد درجة التبلورية والخصائص الميكانيكيه عن انتاج الشركة المصنعة الاماراتية لنفس المادة البوليمرية | In this study two modifications of pure polytetrafluoroethylene (PTFE) [C2F4]n. China_UAE source prepared from solution cast as film and strip have been studied by structural (X - ray diffraction (XRD), Differential Scanning Calorimetry (DSC)) and mechanical properties .subjected to different temperature heating cycle. Both modifications show variation in the scattered X - ray intensity of the basal plane (100) as the temperature of heating cycle is changed and show increasing in crystallinity with the increase of temperature .Moreover, the Enthalpy of each kind is changed with difference of heat treatment where the enthalpy increase with the increase of temperature, and two modifications show different in mechanical properties for PTFE (young's modulus, stress at break, stress at yield, elongation at yield. And elongation at break) when the temperature is change ,The heat treatment of polymer to different temperatures in order to know its properties and resistance to environmental conditions results showed that the mechanical properties increase linearly with the increase of temperature.It seems that the product company of china is better than the product company of UAE in degree of crystallinity and mechanical properties for this polymer.

الدراسه النظريه لتصميم ماكنه بؤره البلازما وتحقيق العوامل المختلفه التي تؤثر على حصيله النيترون المنبعث Theoretical study to design plasma focus machine and investigate various parameters that affect its emitted neutron yield

اسم المؤلف: رنا عيســـى بــك مــــراد
اسم المشرف: مصطفى كامل جاسم رعد حميد مجيد
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: فيزياء البلازما
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا البحث تم تصميم جهاز بؤرة البلازما الكثيفة نظريا بالاعتماد على موديل (لـــي) بناءا المعادلات الرياضية لنموذج لي لكل من هندسة القطبين وعناصر الدائرة الخارجية التي تضم متسعة ومحاثة ومقاومة (RLC). وبعد اجراء الحسابات اللازمة تم ادخال نتائج التصميم في برنامج لرؤية مدى امكانية تشغيله نظريا من خلال دراسة المعلمات المختلفة التي يوفرها البرنامج وبالتالي التعرف على ظروف تشغيله والعوامل المؤثرة عليه. لقد اختير غار الديترويوم كغاز عامل في هذه المنظومة للحصول على ناتج نيتروني من اجل التفاعل النووي الاندماجي. وتم اختبار ودراسة المنظومة عند ضغطين مختلفين (3و4 تور) حيث درست مختلف معلماتها التي يوفرها البرنامج ونوقشت وقورنت النتائج بالاشكال البيانية. اضافة لذلك تمت مقارنة المنظومة المصممة مع منظومة قياسية تناظرها من حيث التركيب النظري وهي منظومة NX2 التي بنيت اساسا للحصول على الاشعة السينية باستعمال غازات النبيلة. اختير في البحث ان يكون غاز الديتريوم هو الغاز العامل للحصول على ناتج نيتروني من اجل المقارنة، حيث درست جميع معلمات التشغيل للمنظومة المصممة مع القياسية بالرسوم البيانية.لقد وجد من خلال انجاز الحسابات اللازمة بان الشكل البياني لانحدار تيار الانبوب الكلي (dip) مباشرة بعد قمة التيار مع الزمن للمنظومة المصممة متفق تماما مع الشكل العام المميز لمنظومات بؤرة البلازما التجريبية دلالة على ان حسابات التصميم صالحة لهذه المنظومة وبالتالي يمكن اجراء الحسابات. ان تصرف فولتية الانبوب مع الزمن للمنظومة المصصمة كان بنفس الشاكله مع المنظومة القياسية. وينطبق هذا على سلوك المعلمات الاخرى بين المنظومتين مثل السرعة والمسار المحوريان والمسار الى الداخل للصدمة الشعاعية ومسار وسرعة استطالة القرص ومسار وسرعة الصدمة المنعكسة شعاعيا وغيرها.تم دراسة ومقارنة تغيرات درجة حرارة البلازما مع الزمن للمنظومتين عند نفس الضغط ولضغطان مختلفان للمنظومة المصممة وكان تصرف ماكنتا بؤرة البلازما بنفس الطريقة. وتم حساب الخسائر المتولدة من الماكنتان مثل خسائر جول وبرمنشتهالنك واعادة الاتحاد وخسائر الطاقة الشعاع الخطي مع الزمن. اخيرا وجد ان المنظومة المصممة ( 1.66 × neutron per shot ) توفر ناتج نيتروني اكبر من المنظومة القياسية (5.15 × neutron per shot) . لقد تصرفت المنظومة المصممة مثل المنظومة القياسية لكن كان الاختلاف في سلوك المنظومة المصممة والقياسية هو اختلاف الترتيب الهندسي للمنظومتين من حيث هندسة الاقطاب واختلاف قيم العناصر الكهربائية للدائرة الخارجية. ان المنظومة المصممة نظريا في هذا البحث يمكن ان تكون مشروع لبناء ماكنة بؤرة بلازما تطبيقية للحصول على ناتجها النيتروني العالي للاستفادة منه في اجراء تفاعل الاندماج النووي.

المقاطع العرضية لتفاعلات القنص والجسيمات المشحونة لانتاج نظائر اليود الطبي المشع Capture and Charged Particles Reactions Cross Sections for Production of Iodine Medical Radioisotopes

اسم المؤلف: رغد سعدون محمد
اسم المشرف: ايمان طارق العلوي
الموضوع العام: علوم الفيزياء
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تعددت الوسائل التي يحاول الاطباء من خلالها الكشف المبكر عن الامراض السرطانية ومن ثم السيطرة عليها قبل ان تتفاقم ويصعب علاجها. ان اخر ما توصل اليه الطب الحديث للحد من انتشار هذه الامراض هو استخدام نظائر المواد المشعة في علاج بعض الامراض وتشخيص البعض الاخر حيث يلعب النشاط الاشعاعي المنبعث من انحلال النظائر المشعة مثل انبعاث الكترونات اوجر والبوزترونات واشعة كاما دورا هاما في التطبيقات الطبية التشخيصية والعلاجية, ان الانوية المشعة ذات الاعمار النصفية الصغيرة (بضع ساعات) تكون ملائمة للحالات التشخيصة وهذا مايسمى التصوير بواسطة الانبعاث البوزتروني (PET) او بقياس طاقة فوتون كاما المنفرد (SPET) حيث تعطي هذه التقنيات صور ثلاثية الابعاد للعضو المراد فحصه, اما الحالات العلاجية فان الاشعة المؤينة المنطلقة لمسافات قصيرة تكون ملائمة لاختراق الانسجة وتغير تركيب الحمض النووي للانسجة المصابة. هذه النظائر يتم انتاجها بواسطة معجلات او مفاعلات نووية خاصة لهذه الاغراض ومن ثم يتم التاكد من نقائها من الشوائب النووية التي تظهر في عملية الانتاج قبل اعطائها للمريض . مما تقدم تم اختيار نظائر اليود المشع (I; A= 119→126, 128, 130, 131) في هذه الدراسة لان معظم نظائره ذات اعمار نصفية ملائمة للحالات العلاجية والتشخيصية. ان الطرق الرئيسية لانتاج اليود هو باستخدام الاهداف , , والتي تضمنت 38 تفاعل مباشر و9 تفاعلات غير مباشرة. وقد تم حساب المقاطع العرضية لتفاعلات (p,γ)و (p,α)و(p,xn) و(d,xn) و(α,xn) لانتاج نظائر اليود المشع حيث تم تقييمها في العمل الحالي اعتمادا على القيم العملية المتوفرة في مكتبة (EXFOR) التابعة لوكالة الطاقة الذرية الدولية (IAEA) حيث احتوت مكتبة (EXFOR) على البيانات العملية للمقاطع العرضية المقاسة لعدة سنوات سابقة ولعدة باحثين حتى الوقت الحالي. ان افضل التفاعلات لانتاج I - 123 هما و, وكذلك افضل التفاعلات لانتاج I - 124 هما و, ولانتاج I - 125 فان افضل تفاعل هو كون هذه التفاعلات تتمتع بانتاج عالي وشوائب قليلة ضمن مدى طاقي قليل. وان افضل تفاعل لانتاج I - 131 هو التفاعل غير المباشر لاهميته باستخدامه في (SPET) لغرض تصوير الغدة الدرقية وكذلك لعلاج سرطان الغدة الدرقية. لقد تم تحليل مديات الطاقة الكاملة لكل تفاعل وقد تم اعادة حساب المقاطع العرضية بفترات صغيرة لطاقة البروتون او الديتريون او جسيمة الفا الساقط بلغت (0.01MeV) مع الاخطاء المرافقة لها. وبذالك تم حساب المقاطع العرضية المختارة لانتاج نظائر اليود المشع وايجاد معادلات الملائمة من نوع Polynomials لعدة مراتب n= 4→10 والتي تربط بين تغير المقطع العرضي مع الطاقة والتي يمكن استخدامها للتنبؤ بقيم المقاطع العرضية غير المحسوبة. لقد تم حساب مستوى الشوائب التي تظهر في عمليات انتاج النظائر التي لها اعلى تطبيقات طبية واختيار افضل منطقة ذات مدى طاقة يتم تحديده باستخدام السايكترون للحد من ظهور الشوائب النووية وتم الحصول على توافق جيد بين النتائج النظرية والنتائج العملية المتوفرة. لقد تم حساب قدرة الايقاف على اساس صيغة زكلر من اجل حساب ناتج (yield) كل تفاعل وحساب سمك الهدف. وقد تم حساب قيمة Q وطاقة العتبة وطاقة الربط والمقاطع العرضية لنظائر اليود المختارة. تم بناء البرامج الحسابية Recom.m وStopp.m وStopd.m وStopa.m وYield.m وImpurity.m في العمل الحالي باستخدام Matlab - 8 اضافة لاستخدام برنامج SRIM (2003) لاجراء الحسابات. | There are many ways in which doctors attempt to early detection of cancer and then control it before it worsen and becomes difficult to treat. The latest findings of modern medicine to reduce the spread of these diseases is the use of isotopes of radioactive Iodine in the treatment of some diseases and diagnosis of others where it plays radioactivity emitted from the dissolution of radioactive isotopes, such as the emission of Auger electrons, positrons and gamma rays which play an important role in medical applications of diagnostic and therapeutic. The half - life of radioactive nuclei with a few hours are appropriate for situations diagnostic and this called imaging by Positron Emission Tomography (PET) or Single Photon Emission Tomography (SPET). These techniques give a three - dimensional picture of the organ to be scan, either cases the therapeutic ionizing radiation emitted over short distances are appropriate to penetrate the tissue and change the structure of DNA of the infected tissue. These principals are produced by accelerators or nuclear reactors, especially for this purpose and then be sure of the purity of nuclear impurities that appear in the production process before giving it to the patient. Isotopes of radioactive Iodine (I; A= 119→126, 128, 130, 131) have been selected in the present work. Since they have suitable half - life that could be used for treatment and diagnostic. The main production routes, use , , targets, including 38 direct reactions and 9 indirect reactions. Exciitation functions for proton, deuteron and alpha particles for the reactions (p,xn), (p,α), (p,γ), (d,xn), (α,xn) (n,p) for the production of isotopes of radioactive Iodine have been evaluated using an experimental of energy of incident particles and cross sections published in the International Atomic Energy Agency (IAEA), especially (EXFOR) library which measured cross sections for different authors and for several years prior to the present. The best reactions for the production of Iodine - 123 are the reaction and reactions, while the best reactions for the production of Iodine - 124 are and reactions. For the production of Iodine - 125, the best reaction is , because it possesses less impurities and low energy ranges and higher yields. While the best indirect reaction for the production of Iodine - 131 is for its importance using in (SPET) for imaging of the thyroid gland and as a therapy by thyroid cancer. The analysis of a complete energy range has been done for each interaction. The cross sections are reproduced in fine steps of incident proton or deuteron or alpha particle energy in 0.01MeV intervals with their corresponding error. Therefore, the selected cross section for the production of radioactive Iodine isotopes have been calculated with a polynomials fitting with a degree n=4→10 that could be used for the prediction of un calculated cross sections. Level of impurities that appear in the isotope production processes that which have the highest medical applications have been calculated. The best area of useful energy range has been chosen by using cyclotron to reduce the appearance of nuclear impurities The stopping power according to Zeigler formulae was used in order to obtain the yield for each reaction and to calculate the target thicknes. Q - value, threshold energy and binding energy for selected Iodine isotopes were also calculated. The programmes of Recom.m, Stopp.m, Stopd.m, Stopa.m, Yield.m and Impurity.m, have been built in the present work using Matlab - 8 to calculate the results of the present work, as well as SRIM (2003) program were used

الخصائص الفيزيائية لاغشية اوكسيد الخارصين المشوبة تشويبا مشتركا بالبورون والالمنيوم Physical Properties of Aluminum and Boron co - doped Zinc Oxide Thin Films

اسم المؤلف: رشيد هاشم جبار
اسم المشرف: انوار حسين علي الفؤادي
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا البحث تم تحضير اغشية اوكسيد الخارصين النقي ZnO والمشوبة تشويبا مشتركا بالبورون والالمنيوم ( AZB) بنسب تشويب (2, 4, 6, 8 %)، اي [ZnO : (B 1%+Al 1%), ZnO : (B 2%+ Al 2%), ZnO : (B 3%,Al 3%), ZnO : (B 4%,Al4%)]. اذ تم تحضير الاغشية بطريقة التحلل الكيميائي الحراري بدرجة حرارة القاعدة مقدارها(450 ±10 oC) وسمك (150±5 nm) على قواعد زجاجية وسليكون مسامي من النوعين (n, p) بمقاومية مقدارها(0.05 - 0.1 Ω.cm) واتجاه بلوري (111). تم تصنيع مفارق هجينة من انواع : ( ((ZnO, AZB)/p - PS/Si, (ZnO, AZB)/n - PS/Si ، وتم تحضير طبقة السليكون المسامي بطريقة التنميش الكهروكيميائية والكهروكيميائي تحت تاثير ضوء الهالوجين على قواعد السليكون للنوعين (n, p) بكثافة تيار مقدارها (30 mA) وزمن مقداره (30 minutes) . تم دراسة طبوغرافية سطح الاغشية وللسليكون المسامي باستعمال المجهر الالكتروني الماسح (SEM)، مجهر نفاذية الالكترونات (TEM) ومجهر القوة الذري (AFM) فتبين ان التركيب السطحي للاغشية المرسبة هو تركيب نانوي يتناقص فيه الحجم الحبيبي مع زيادة نسب التشويب المشترك اذ بلغت قيمة اصغر حجم حبيبي 7.5 nm))، وان خشونة السطح تزداد مع زيادة التشويب المشترك وتتغير من(1.34 - 6.15 nm) ومن (6.4 - 12.12)للاغشية المرسبة على الزجاج والسليكون المسامي على التوالي، واظهر جهاز حيود الاشعة السينية (XRD ) ان اغشيية ZnO المحضرة النقية والمشوبة ذات تركيب متعدد التبلور ومن النوع السداسي المتراص (hexagonal wurtzite). تم دراسة الخصائص البصرية للاغشية المحضرة بوساطة قياس طيف النفاذية والامتصاصية عند درجة حرارة الغرفة لمدى طول موجي يتراوح من (300 - 1100 nm) تبين ان النفاذية البصرية للاغشية النقية (87 %) وانها تتناقص مع زيادة نسب التشويب، وظهر ان فجوة الطاقة البصرية تزداد بزيادة نسب التشويب حيث بلغت قيمة فجوة الطاقة البصرية للغشاء النقي (3.22 eV) وتصل الى (3.31 eV) عند التشويب بنسبة (8%). اظهرت القياسات الكهربائية ان الاغشية النقية والمشوبة من النوع السالب (n - type)، وتركيز حاملات الشحنة يزداد مع زيادة نسب التشويب المشترك. لاغشية المحضرة المرسبة على الزجاج والسليكون المسامي للنوعين (n, p) تم استخدامها في قياس التحسسية للغازين (NH3, NO2)، بدرجة حرارة الغرفة وبتراكيز (50, 100, 150, 200 ppm). اظهرت النتائج ان المقاومة الكهربائية للاغشية تتناقص مع زيادة التشويب بالنسبة للغاز (NH3) بسبب تفاعل الاختزال، لكنها تزداد مع زيادة التشويب بالنسبة للغاز (NO2) بسبب تفاعل الاكسدة. بينت النتائج ان تحسسية الاغشية المرسبة على السليكون المسامي تكون اكبر من تحسسية الاغشية المرسبة على الزجاج، وتكون تحسسية الاغشية المرسبة على السليكون المسامي نوع (n) اكبر منها في حالة السليكون المسامي لنوع (p). وبينت الدراسة ان زيادة تراكيز الغازات تؤدي الى زيادة التحسسية. | In this research, pure ZnO and (aluminum and boron) co - doped ZnO(AZB)thin films were deposited with various doping concentration(2, 4, 6 and 8 %),[ZnO : (B 1%+Al 1%), ZnO : (B 2%+ Al 2%), ZnO : (B 3%,Al 3%), ZnO : (B 4%,Al4%)]. The thin films have been prepared by Spray Pyrolysis's method at (450 ±10 oC) substrate temperature with (150±5 nm) thickness on glass and porous silicon (n & p) types with resistivity (ρ= 0.05 - 0.1 Ω.cm) and (111) crystalline orientation. Heterojunctions of the types, such as : (( ZnO, AZB)/p - PS/Si, (ZnO, AZB)/n - PS/Si were also prepared. The porous silicon layer was prepared by the electrochemical and photo electrochemical etching under the effect of halogen light on silicon substrates for (n & p) types with current density (30 mA) for (30 minutes). The surface topography of the films and the porous silicon are studied by using the Scanning Electron Microscopy (SEM), Transmission electron microscopy (TEM) and the Atomic Force Microscopy (AFM). The study shows that the surface structure of the deposited films is nano structural and the value of the grain size decreases with the increase of co - doping where the minimum value of grain size was (7.6 nm). It was found that the surface roughness increased with doping from (1.34 to 6.15 nm) and (6.4 to 12.12) for a films deposited on glass and porous silicon substrate respectively, the x - rays diffraction showed the prepared doped and undoped ZnO thin films were of polycrystalline structural of(hexagonal wurtzite). The optical properties of the prepared thin films have been studied by measured the transmittance and absorbance spectrum at room temperature for the wavelength range (300 - 1100 nm), the transmittance was (87 %) for the undoped ZnO, the transmittance decreased with the co - doped increased. The value of the optical energy gap increased with the co - doped increase, the optical energy gap of the undoped film was found to be (3.22 eV) and increased to (3.31 eV) after doping with (8%) rate. The electrical measurements proves that doped and undoped thin films were n - type, and the carrier charge concentrations increased with the increase of co - doped rate. The prepared thin films deposited on glass and porous silicon (n & p) types have been used to the sensitivity measurements for (NH3, NO2) gasses at room temperature for the (50, 100, 150, 200 ppm) concentrations. The results shows that the electrical resistance for the thin films decrease with the increase of co - doped concentrations for (NH3) gas due to the reducing interaction, but it increases with the increase of co - doped concentration for (NO2) gas due to the oxidation interaction. The results show that the sensitivity of the thin films deposited on porous silicon substrates is higher than the sensitivity of the thin films deposited on glass substrates. The sensitivity of n - type porous silicon is higher than p - type porous silicon and glass substrate. The study shows that the increase of gases concentrations leads to increase of sensitivity.

دراسة الخواص البصرية والكهربائية لمتراكبات PMMA/ اكسيد المعادن Study the Optical and Electrical Properties of PMMA/Metal Oxide Composites

اسم المؤلف: رسل طه حسين
اسم المشرف: رغد صبحي الخفاجي
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يهدف هذا البحث الى تحضير متراكبات ثلاثية هجينة من PMMA مقواة بجسيمات TiO2 - Al2O3 وZrO2 بتقنية الصب .تم استخدام كسور وزنية (84 - 92) wt % من بولي ميثيل ميثا اكريلك ونسبة ثابتة % (4) من تيتانيا مع نسب وزنية تتراوح بين wt % (4 - 12) للالومينا والزركونيوم. تم دراسة المواصفات التركيبية من خلال حيود الاشعة السينية ومجهر القوة الذرية. بينت فحوصات صور مجهر القوة الذرية تجانس في البناء البلوري. اما الخواص العزلية فقد فحصت من خلال قياس ثابت العزل عند مدى تردد (102 - 106) Hz وبينت النتائج ظهور تاثير طفيف عند اضافة الالومينا للمتراكب الهجيني (PMMA - TiO2 - Al2O3) مقارنة بمضاف الزركونيوم للمتراكب الهجيني (PMMA - TiO2 - ZrO2) حيث قيم ثابت العزل تزداد مع زيادة التركيز (3.408500 - 10.69851). في حين يتناقص عامل الفقد بزيادة التردد للمتراكبات (PMMA - TiO2 - Al2O3)و(PMMA - TiO2 - ZrO2) . قيست التوصيلية الكهربائية المستمرة لمدى درجات حرارية تتراوح بين ( 313 - 373 )K ولوحظت زيادة في القيم التوصيلية بزيادة التركيز ودرجة الحرارة (5.5E - 10 - 8.52E - 10) (Ω.m) - 1 في حالة الزركونيوم المضاف للمتراكب الهجيني. تم حساب الثوابت البصرية للعينات المحضرة كدالة للطول الموجي وذلك باستخدام مطياف بمدى nm( - 1100200). حيث تم حساب معامل الامتصاص، معامل الخمود، معامل الانكسار وفجوة الطاقة البصرية, ومن حساب النتائج نلاحظ ان قيم معامل الامتصاص ومعامل الخمود ومعامل الانكسار لل(PMMA - TiO2 - Al2O3) اعلى من (PMMA - TiO2 - ZrO2) كدالة للطول الموجي، نلاحظ ايضا، انخفاض في قيم فجوة الطاقة البصرية المسموحة eV (2.90 - 2.50) في متراكبات الالومينا بينما من (2.90 - 2.58) eV للزركونيوم. وكذالك فجوة الطاقة البصرية الممنوعة (2.85 - 2.48) eV الكترون فولت للالومينا بينما eV (2.85 - 2.52) للزركونوم . | This study aims to synthesize ternary hybrid composites PMMA polymer matrix with TiO2, Al2O3 and ZrO2 as additives using casting technique. the weight fractions of matrix with range (84 - 92) wt %, fixed percentage (4) % of TiO2 and range of weight fractions with range (4 - 12) wt % of Al2O3 and ZrO2 were used as started materials. Characterization properties were examined through XRD and AFM. Obtained micrograph and XRD revealed homogeneity structure for Al2O3 filler. Dielectric properties such as dielectric constant were carried for range (102 - 106) Hz frequency .The addition of Alumina filler exibits slightly effect on dielectric constant values for prepared ternary hybrid composite (PMMA - TiO2 - Al2O3 ) compared with ZrO2 for ternary hybrid composite (PMMA - TiO2 - ZrO2) where dielectric constant increases as concentration increases (3.408500 - 10.69851) . Dissipation factor decreases with increasing frequency in composite (PMMA - TiO2 - Al2O3) and (PMMA - TiO2 - ZrO2). DC electrical conductivity was conducted in temperature range ( 313 - 373 )K. Markedly increasing for the DC electrical conductivity of Zirconia filler with respect to additional concentration (5.5E - 10 - 8.52E - 10) (Ω.m) - 1 .Otherwise DC electrical conductivity increases versus applied temperature for both prepared composites. Optical constants (extinction coefficient, absorption coefficient, and Index of refraction), optical energy gap were obtained for prepared Specimens as function of wavelength using spectrometer at range (200 - 1100)nm. It was noticed that the values of extinction coefficient ,coefficient of absorption , and refractive index for (PMMA - TiO2 - Al2O3) are higher from that of (PMMA - TiO2 - ZrO2) as wavelength, also, more decreasing in allowed optical energy gap values from (2.90 - 2.50 eV) for Al2O3 filler and from (2.90 - 2.58 eV) for ZrO2 as additive. Also forbidden optical energy gap decreases in case Al2O3 from(2.85 - 2.48) eV while from (2.85 - 2.52) for ZrO2 as additive.

دراسة التركيب المتهيج للنوى زوجية - زوجية ذات العدد الذري Z= 50, 48, 46 في المستوى المتهيج الاول Study of Excited Structure for Even - Even Nuclides of Z = 50, 48, 46 in The First Excited State

اسم المؤلف: رسل سعد هادي
اسم المشرف: فاطمة عبد الامير جاسم
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: درست الخواص الكهرومغناطيسية للنظائر زوجية - زوجية للنوى 48Cd , 50Sn و46Pd الغنية بالنيوترونات من خلال قوى الانتقال لرباعي القطب الكهربائي |M(E2)|2 W.u ↓ واحتمالية الانتقال المختزل B(E2)W.u ↓ لانتقال اشعة كاما من المستوى المتهيج الاول الى المستوى الارضي. حيث تم حساب قوى الانتقال لرباعي القطب الكهربائي |M(E2)|2 W.u ↓ بالاستعانة بمعدل العمر للمستوى المتهيج الاول والشدة النسبية لاشعة كاما المنبعثة من ذلك المستوى, بينما قيم احتمالية الانتقال المختزل B(E2)W.u ↓ استخرجت من خلال عمر النصف للمستوى المتهيج الاول المصحح لمعامل التحول الداخلي.وللحصول على قيمة دقيقة لانتقال رباعي القطب الكهربائي ↓ E2, تم حساب ورسم القيم المتبناة لكل من |M(E2)|2 W.u ↓ وB(E2)W.u ↓ كدالة لعدد النيوترونات.في هذا البحث, تم تحويل القيم المتبناة لانتقال ↓E2 الى قيم احتمالية الانتقال المختزل B(E2) ↑ e2b2 والتي افادتنا في دراسة تركيب النوى من حيث الاختلاف في الشكل لان عامل التشوه β تم استخراجه من B(E2) ↑ e2b2, كما ان دراسة تاثير عدد النيوترونات على سلوك كل من B(E2) ↑ e2b2 وβ في المتسلسلات الايزوتونية لنوى 48Cd , 50Sn و46Pd يعطي معلومات جيدة حول التشوه في النوى.تركزت دراستنا على ثلاث انواع مختلفة من النوى, الاول بعدد ذري سحري50 , والثاني بعدد ذري شبه سحري 48, والثالث بعدد ذري بين القشرات المغلقة 46.في نهاية العمل الحالي تم عمل مقارنة جيدة للحسابات الحالية لقيم احتمالية الانتقال المختزل B(E2) ↑ e2b2 وعامل التشوه β مع معظم القيم العملية والنظرية الحديثة. | Electromagnetic properties for even - even nuclides in neutron - rich nuclei such 50Sn, 48Cd and 46Pd have been studied through the electric quadruple transition strength |M(E2)|2 W.u ↓ and the reduced transition probability B(E2)W.u ↓for γ0 - transition from first excited state to the ground state. The electric quadruple transition strength |M(E2)|2 W.u ↓ is calculated by using life - time for excited state with the intensity of γ0 - transition, while B(E2)W.u ↓ is extracted from half - life time to state corrected for internal conversion coefficient. To obtain precise value for the transition of E2↓, the adopted value for |M(E2)|2 W.u ↓ and B(E2)W.u ↓ was calculated and plotted as a function for neutron number. In present work, the adopted values for the transition of E2↓ are converted to B(E2)exp ↑ e2b2 which helped us to study the structure for nucleus, such as the variation in shape, because the deformation parameter β is extracted from B(E2) ↑ e2b2 and the study for behavior of each of B(E2) ↑ e2b2 and β versus neutron number in isotonic chains to 50Sn, 48Cd and 46Pd gives good information about the deformation in nuclei. Our study focused on the three different types of nuclei, the first with atomic magic number 50, the second with semi - magic atomic number 48 and the third nucleus with atomic number between closed shells 46. At the end of the present work, the good comparisons for the present calculation to the values of the B(E2) ↑ e2b2 and β with most recent values of experimental and theoretical was done.

تصميم مراة ايونية تعمل كمصحح للزيوغ باستخدام طريقة القيم الحدودية DESIGN OF ION MIRROR AS AN ABERRATION CORRECTOR USING BOUNDARY VALUES METHOD

اسم المؤلف: محمد سلام مزاحم العبيدي
الموضوع العام: علوم الفيزياء
السنة: 2007
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

تصحيح الزيغ بسبب عدم التراصف في العدسات الكهروسكونية THE ABERRATION CORRECTION DUE TO MISALIGNMENT IN ELECTROSTATIC LENSES

اسم المؤلف: رؤى تحسين عبد الله الصميدعي
اسم المشرف: احمد كمال احمد
الموضوع العام: علوم الفيزياء
السنة: 2006
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: اجري بحث حاسوبي في مجال بصريات الجسيمات المشحونة. يهتم البحث بتصميم منظومات عدسات كهروسكونية بوجود وعدم وجود تاثير عدم التراصف تعمل تحت ظروف تكبير مختلفة.ان توزيع مجال الجهد لعدسه احادية الجهد وعدسة مغمورة كهروسكونية تم تمثيله بدوال تحليلية. تم حل معادلة الاشعة المحورية للمجالات المقترحة لايجاد مسار الجسيمات المشحونة المارة في كل عدسة. ومن توزيع الجهد المحوري ومشتقتيه الاولى والثانية .تم حساب الخواص البصرية كالبعد البؤري والزيغين الكروي واللوني. كذلك تم ايجاد شكل اقطاب كل عدسة كهروسكونية ببعدين وبثلاثة ابعاد. ويعتمد الزيوغ في العدسات الكهروسكونية اعتمادا كبيرا على تراصف الاقطاب، وقد وجد انه عامل مهم يؤثر على الشكل الهندسي لمنظومة العدسة الكهروسكونية. ان نتائج هذه الدراسة لا تبرهن نظريا" امكانية تصميم منظومات عدسة كهروسكونية بزيوغ واطئة فحسب بل تبين امكانية تصنيع مثل هذه العدسات عمليا". | A computational investigation has been carried out in the field of charged - particle optics. The work is concerned with the design of electrostatic lenses with and without misalignment effect operated under different magnification conditions. The potential field distributions of einzel and immersion electrostatic lenses have been represented by analytic functions. The paraxial ray equation has been solved for the proposed fields to determine the trajectory of the charged particles traversing each lens. From the axial potential distribution and its first and second derivatives, the optical properties such as the focal length and spherical and chromatic aberrations have been compute. The electrode shape of each electrostatic lens has been determined in the two - and three - dimensions. The aberration of the electrostatic lens is highly dependent on the alignment of the electrodes and it has been found to be an important parameter affecting the geometry of the electrostatic lens system. The results of this investigation not only prove in theory the possibility of designing electrostatic lens systems with low aberration but also show the possibility of constructing such lenses in practice

دراسة النشاط الاشعاعي لنماذج من التربة والماء في بغداد وكربلاء والبصرة Determination of the Radioactivity in Soil and Water in Baghdad, Karbala and Basrah Samples

اسم المؤلف: مصطفى عرب بداي علي البيضاني
الموضوع العام: علوم الفيزياء
السنة: 2006
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يتضمن البحث دراسة عملية لتحديد تراكيز اليورانيوم وغاز الرادون في التربة والماء لمناطق من بغداد وكربلاء والبصرة وللتعرف على مدى تلوث تلك المناطق بالمواد المشعة بعد احداث الحرب على العراق عام 2003 .تضمن الجزء الاول ايجاد تراكيز اليورانيوم في التربة والماء باستخدام كاشف الاثر (CR - 39) حيث استخدم التفاعل U - 235(n,f)U - 236 كمصدر لشظايا الانشطار النووي وذلك بقصف نواة اليورانيوم U - 235 بالنيوترونات الحرارية من المصدر النيوتروني (Am - Be) بفيض نيوتروني حراري (5 ×103 n cm - 2 s - 1) .تم تحديد التراكيز بالحسابات المعتمدة على المقارنة مع النماذج القياسية، وقد اوضحت النتائج التي حصلنا عليها ان اعلى تركيز لليورانيوم في التربة (2.73 ppm) في منطقة التاجي واعلى تركيز لليورانيوم في الماء (2.12 ppm) في منطقة العشار. تضمن الجزء الثاني ايجاد تراكيز غاز الرادون في التربة والماء باستخدام تقنية عد اثار جسيمات الفا المنبعثة من غاز الرادون فيكاشف الاثر (CR - 39) .وقد اوضحت النتائج التي حصلنا عليها ان اعلى تركيزلغاز الرادون في التربة (666 Bq/m3) في منطقة التاجي واعلى تركيز للرادون في الماء (14 Bq/m3) في منطقة العشار. اوضحت النتائج التي حصلنا عليها بان اعلى تراكيز لليورانيوم والرادون كان في منطقة التاجي ببغداد وفي منطقة العشار بالبصرة بسبب كون تلك المناطق مسرح للعمليات الحربية ضد العراق عام 2003 . | The aim of this project is to measure the uranium and radon gas concentrations in soil and water samples taken from regions situated in Baghdad, Karbala and Basrah, and to limit the level of contamination with radionuclides for these regions during the 2003 war.The first part contains the determination of uranium concentration in soil and water samples using CR - 39 Track detector. The nuclear reaction used a source of nuclear fission fragments is 235 - U (n , f) obtained by the bombardment of U - 235 with thermal neutrons from (Am - Be) source which has flux of (5 ×103 n cm - 2 s - 1). The concentrations values were calculated by a comparison with standard samples which prepared in our laboratory.The results obtained show that the higher concentration of uranium in soil samples was (2.73 ppm) in Al - Tajii region, and the higher concentration for water samples was (2.12 ppm) in Al - Ashaar region.The second part contains the determination of radon concentration in soil and water samples using alpha - emitters registration which emits from radon gas in (CR - 39) track detector.The results show that the higher concentration for radon gas in soil samples was (666 Bq/m3) in Al - Tajii region and in water samples was (14 Bq/m3) in Al - Ashaar region.The results show the maximum values of uranium and radon concentrations were in the (Al - Tajii and Al - Ashaar) regions, because these regions were a field of military operations during the 2003 war

نظام اخفاء البيانات ذو معدل اخفاء عالي باستخدام تحويل الافين وطريقة البت الاقل اهمية High Hiding Rate Image Steganography System Based On Affine Transform and LSB Method

اسم المؤلف: محمد خليل خلاف سهيل القيسي
اسم المشرف: لؤي ادور جورج اياد عبد العزيز العاني
الموضوع العام: علوم الفيزياء
السنة: 2008
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The spying and intrusion operation had been widely spread to steal the information especially with the development of computer networks (like, Internet). To prevent this danger the development of a new technology called “digital information hiding” was developed in such a way that the intruder cannot notice the existence of secret information in the media.In this project an image steganograph system is introduced. The proposed system is based on using the affine transform to represent the blocks of the secret image in terms of the blocks of the cover image. Then, the least significant bits (LSB) insertion method is utilized to hide the quantized affine transform coefficients of the secret image in the cover image. Also in this research some block indexing methods are utilized to improve (i.e, speed up) the involved trials of affine mappings. Three systems (they are traditional IFS, IFS with symmetry predictions, and IFS with symmetry prediction and blocks indexing) have been established. They used to manage the way of selecting the suitable domain (cover) to represent the range (secret) block. The domain search operation will not need to make all isometric - block tests on each domain block. The best domain isometric state is assessed using the introduced isometric predictor; which is based on the moment status of the matched block. This will significantly reduce the matching time because only one match, instead of eight, will be tested to evaluate the IFS - similarity between any range and domain block. Also, a block indexing method is introduced to filter the domain blocks, and filter - in only those domain blocks that have similar block index with that of the mapped range block to be tested using IFS - matching.Some of the well known fidelity measures (like, MSE and PSNR) have been used to asses the quality of the reconstructed image. The conducted test results indicated that the proposed improvements have reduced the required hiding time down to 6.81 second (around 80 times in comparison with the traditional scheme) without making significant degradation in image quality

تاثير نسب ومعاملات الحزم على دقة تصنيف صور الاقمار الصناعية المتعددة الاطياف Effect of Band Ratios and Indices on Classification Accuracy of Multispectral Satellite Images

اسم المؤلف: سيف كامل شنين
اسم المشرف: اياد عبد العزيز العاني صلاح عبد الحميد صالح
الموضوع العام: علوم الفيزياء
السنة: 2008
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Multispectral satellite images are holding whole information about the areaunder investigation. Many of digital processing techniques are used to extractmost of the possible information from these images, such these techniques arespectral band ratios, Tasseled Cap transformation and Principle ComponentAnalysis (PCA). These techniques are play good part for features extraction andreducing the number of spectral bands with no loses in information.The research aims to apply classifications on band ratios and image indiceswhich include PCA and Tasseled Cap transformations, of Enhanced ThematicMapper Plus (ETM+) satellite images, and to show how the accuracies of theclassification are differ from the accuracy of classification of the raw ETM+ bandsimages.The results show that the best bands ratios that adopted to represent fiveselected land features are 5/7, 4/5, 2/5, 1/4, and 2/4. Optimum Index Factormethod (OIF) has been adopted on raw bands combinations, and on the bandsratio combinations to select which band combination that contains muchinformation, where the results show that the best combination for raw bands is3 - 4 - 7, and best combination for ratios band is 4/5 - 1/4 - 2/5.Iterative Self Organizing Data Analysis (ISODATA) method has beenadopted as unsupervised classification, and Maximum Likelihood method assupervised classification. The overall accuracies are 87.18%, 89.45%, 89.26%,and 89.52% for raw bands, band ratios, Tasseled Cap, and PCA respectively,which showed that transformation techniques give good spectral enhancementsand feature extraction which are undistinguishable in raw image, and representgood tools to increase the accuracy of classification.

تحضير اوكسيد القصدير ذو التراكيب النانوية على اوكسيد الالمنيوم المانود بطرق مختلفه Synthesis of SnO2 nanostructure on anodic aluminum oxide by different method

اسم المؤلف: رحمه سعد محمد العبيدي
اسم المشرف: رعد سعدون صبري
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم تحضير قالب اوكسيد الالمنيوم المانود بعملية الانودة بخطوتين للحصول على افضل ترتيب للمسامات باستخدام حامض الاوكزاليك بشروط تحضير مختلفة مثل درجة حرارة المحلول (10,7و 15 درجة سيليزية) وفولتيات الانودة (30 و40 فولت.(نتائج المجهر الالكتروني الماسح للقالب المحضرعند 30 فولت بينت ان المسامات ذات قطر صغير وترتيب ضعيف. بينما 40 فولت , المسامات ذات قطر اكبر وذات ترتيب عالي. من خلال هذه الدرجات الحرارية الثلاثة المختلفة (10,7و 15 درجة سيليزية). وجد ان (10 درجة سيليزية) هي افضل درجة حرارية لتحضير مسامات ذات ترتيب عالي. اذا درجة الحرارة ازدادت فان قطر المسام سوف يزداد . عامل الوقت مهم جدا في هذه العمليه عندما وقت الانودة يقل فان اوكسيد الالمنيوم المانود اصبح رقيق جدا وهش ويتكسر بسهوله جدا وبالتالي ستكون هناك صعوبة في استخدامه كقالب ترسيب. عندما الوقت يزداد لاكثر من 12 ساعة في الانوده الثانيه فسمك القالب يصبح حوالي 44 مايكرو متر سيعطي افضل شرط لترسيب اوكسيد القصدير. في هذا البحث اربع طرق استخدمت لتحضير اوكسيد القصدير بشكل قضبان نانوية باستخدام قالب اوكسيد الالمنيوم المانود مثل طريقة الصول - جيل ,تقنية التغطيس والفلترة ,التفريغ والتقطير وطريقة التبخير الحراري. جميع نتائج فحوصات الاشعة السينية لكل طرق التحضير تبين ان اوكسيد القصدير هو تركيب متعدد التبلور وذات تبلور متجانس. طرائق تحضير الصول - جيل والتبخير الحراري تبين ان القضبان النانوية لاوكسيد القصدير لها نفس القطر والطول وافضل ترتيب واكثر تجانس . بينما القضبان النانوية لطرائق التحضير الاخرى تختلف في القطر والطول. | Anodic aluminum oxide (AAO) was prepared by anodization process with 2 - step to obtain the best order arrangement of pores using oxalic acid at different preparation conditions such as electrolyte temperature (7, 10 and 15 °C) and anodization voltages (30 and 40 V). SEM results of the template which prepared at 30V showed the pores with small diameter and poor order. While at 40V, the pores with large diameter and high quality order pores. From three different temperatures (7, 10 and 15 °C), it's found that 10°C is the best temperature to prepare high quality order pores. If the temperature increases, the pore's diameter will increase. The time factor is very important in this process; when the anodization time decrease, AAO becomes very thin, brittle and can break very easily. Thus, there will be a difficulty to use as a deposition template. When the time increase more than 12 hr in second anodization, the template thickness's will become 44µm which gives the best condition to deposit SnO2. In this research, four methods used to prepare SnO2 nanorods by using AAO template such as the sol - gel, immerse and filtration technique, vacuum and drop setting and thermal evaporation. The whole results of XRD for all preparation methods showed that SnO2 is polycrystalline and homogeneous crystal. The sol - gel and thermal evaporation methods revealed the SnO2 nanorods have the same rod's diameter, length, best order and highly homogeneous. While the nanorods of other preparation methods are different in diameter and length.

تحضير ودراسة الخواص الكهربائية والبصرية لاغشية NiO الرقيقة غير المشوبة والمشوبة بالنحاس لتطبيقات متحسس الغاز Preparation and study the electrical and optical properties of undoped and Cu doped NiO thin films for gas sensor applications

اسم المؤلف: رانيا رعد كاظم الكناني
اسم المشرف: انوار حسين علي الفؤادي
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في العمل الحالي، تم تحضير اغشية رقيقة جيدة باستخدام تقنية منخفضة التكلفة وهي الرش الكيميائي الحراري, تم قياس الخصائص التركيبة , البصرية والكهربائية, والتحسسية لاغشية اوكسيدالنيكل غير المشوبة والمشوبة بالنحاس عند النسب ((1%,3%,5%,7%المرسبة على قواعد زجاجية مسخنة ب درجة حرارة c o (10 ± 400) وبسمكnm ( 10± 250 ) ، من حيود الاشعة السينية وجد ان جميع الاغشية النقية والمشوبة لها تركيب مكعبي , وبصورة عامة هناك زاويتي حيود عند المدى الزاويo 30 - 60)) تعود للسطحين (111)و(200) . وجد ان الحجم الحبيبي يزداد مع زيادة نسب التشويب حتى نسبة 3% ثم تنخفض قيمته عند النسب 5%, 7% ,ومن خلال قياسات ماسح القوة الذرية AFM وقياسات المجهرالالكتروني الماسح SEM تم التعرف على تاثير التشويب على جميع خواص الاغشية, كما تبين من نتائج التشويب ان زيادة التشويب تؤدي الى االزيادة في الحجم الحبيبي عند النسب (1%و3%) ثم ينخفض عند النسب (5% و7%). اشتملت الرسالة دراسة الخواص البصرية لاغشية اوكسيد النيكل غير المشوبة والمشوبة بالنحاس , وتبين ان فجوة الطاقة تقل من3.8 - 2.8) ev ) بزيادة نسبة التشويب. وجد ان الاغشية لها معامل امتصاص عالي cm(α>10 ) الذي يؤدي الى زيادة احتمال حدوث الانتقالات المباشرة بين المستويات البلورية وبينت النتائج ان معامل الامتصاص يزداد مع زيادة نسب التشويب. وقد اظهرت نتائج الخواص الكهربائية (D.C) زيادة التوصيلية الكهربائية مع زيادة التشويب لتصل اعلى قيمة لها عند نسبة 7%. وقد وجد ان لجميع الاغشية طاقات تنشيط تقل مع زيادة نسبة التشويب. من قياس تاثير هول وجد ان تحركية حاملات الشحنة تقل وتركيز الحاملات تزداد مع زيادة نسب التشويب . اما خصائص التحسسية لجميع الاغشية المحضرة تم قياسها للابخرة (NH ,H O )عند تراكيز مختلفة ppm(100,200,300) عند درجة حرارة ,150° c واظهرت النتائج ان افضل تحسسية كانت عند نسبة تشويب 5% لبخار NH , وقد وجد ان هناك زيادة خطية للتحساسية مع زيادة تركيز البخار. وهذا بسبب زيادة كمية البخار الذي يتفاعل مع سطح الغشاء الرقيق. | In the present work, a good adherent and smooth films of undoped and copper doped NiO have been prepared by using low cost spray pyrolysis technique at different percentage of copper concentration ,structural, optical, electrical, and sensing properties have been studied at different concentrations of Cu (1% ,3%,5%,7% ) deposited on glass substrate at temperature (400±10) oc with (250±10)nm thickness . From the X - ray diffraction investigation, the crystalline structure of thin films was a polycrystalline with a cubic structure , generally the peaks of the NiO and NiO : Cu thin films were observed at diffraction angles at the range (37°and 43°). All NiO : Cu thin films display peaks of (111), (200) and Cu peaks do not appear even after adding a higher quantity of Cu into the NiO films, the angle position of peak (111) shifted toward lower value with doping in Cu at 1%,3% then start to increases at 5%,7% concentration,resulting in the increasing of lattice constant (a),interplaner spacing (d) and crystallite size (D),then decreases due to the degradation in the crystallinity of NiO doped with 5%,7% respectively,surface analysis by SEM and AFM have been used to understand the effect of the doping on morphology properties of the samples. The doping resulted in increasing grain at doping rates (1%,3%), then decreases at doing rates (5%,7%). The measurements of optical properties of undoped and copper doped NiO films decreased with increasing the doping rate.Also the results have showed that absorption cofficient increases with doping to reach maximum value at 7% concentration .The energy gap of was calculated for undoped and copper doped NiO films,it is noticed that the energy gap decreases with the increases of doping until it reaches the minimum value at 7% doping concentration .The D.C measurements show that the resistivity decreased with increasing doping rate,also the hall measurements have been showed the carrier concentration increased with increasing doping rate. The AFM results reveal that the grain size increases with the increase in copper concentration at rates (1%,3%) and then decreased at rates (5%,7%).The sensing measurements showed that undoped and copper doped NiO thin films have high sensitivity to NH vapor as compared to H O vapor , and the best result was 26% at doping rate 5% at 300ppm vaopr concentration ,at operation temperature 150 o c for NH vapo

تقدير الحاصل النيتروني لبعض نوى النظائر المتوسطة نتيجة لتفاعلات البروتون وجسيمات الفا والنيوترون لمدى طاقة (E=10 - 50) MeV

اسم المؤلف: رافت عبد الحسن مسلم
اسم المشرف: خالد هادي مهدي العبيدي
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: للنظائر اهمية كبيرة في كثير من المجالات مثل المجالات البحثية والصناعية والطبية ومجالات اخرى. فبعضها يحتاج لنظائر بنصف عمر طويل او بنصف عمر قصير وحاصل نيتروني عالي او قليل للحالتين, لذا تضمن هذا العمل دراسة الخصائص النووية لتسعة عناصر متوسطة الاعداد الكتلية هي (Ca ,Sc ,Ti ,Ni ,Cu ,Zn ,Zr ,Nb ,Mo ), ولكل عنصر تم اختيار عشرة نظائر لذا تضمنت الدراسة 90 نظير اعدادها الكتلية بين (41 الى 96) , شملت هذه الدراسة حساب طاقة التفاعل, طاقة العتبة, الكتلة المختزلة, طاقة فصل النيوترون وطاقة الربط النووية لتفاعلات ,Ca(α,n)Ti Ni(α,n)Zn , Zr(α,n)Mo , ,Sc(p,n)Ti ,Cu(p,n)Zn Nb(p,n)Mo , ,Ti(n,n)Ti Mo(n,n)Mo ,Zn(n,n)Zn لنظائر العناصر اعلاه , كما تم حساب قدرة الايقاف باستعمال برنامج (SRIM 2013) ومن ثم حساب الحاصل النيتروني من المعادلات النظرية اعتمادا على احدث ما نشر من المقاطع العرضية للعامين (2010 ,2012 ), كما تم في هذه الدراسة استخراج مجموعة من المعادلات شبه التجريبية الموحدة لحساب المحصول النيتروني لهذه العناصر بشكل مباشر لنوعين من التفاعلات (α,n) و(p,n) والتي كل منها يشتمل على عشرة نظائر ليكون المجموع 60 تفاعل, نتائج الحاصل النيوتروني المحسوبة من هذه المعادلات اعطت توافقا جيدا مع القيم النظرية التي حسبت من المعادلات النظرية. هذه المعادلات مع ثوابتها وضعت ضمن برنامج ماتلاب صمم لهذا الغرض وبالاعتماد على نوع العنصر ونوع التفاعل وطاقة الجسيم الساقط لايجاد الحاصل النيتروني لاي نظير عدده الكتلي بين (40 - 100 ) لمدى طاقة يتراوح بين (15 - 50) مليون الكترون فولط. يمكن تطوير البرنامج ليشمل عدد اكبر من العناصر بنظائرها ولمديات طاقة اوسع. | Isotopes have a great importance in many fields such as research, industrial, medical and other. Some of them need isotopes with long half life or short half - life with high neutron yield or less for them. So this work included the study of the nuclear properties for nine medium elements (Ca, Sc, Ti, Ni, Cu, Zn, Zr, Nb and Mo), from each element we choose 10 isotopes, so the total are 90, their masses numbers were between (41 to 96), this study included the calculations of the Q - value reaction, threshold energy, reduced mass, separation energy of neutron and the binding energy for nuclear reactions , Ca(α,n)Ti , Ni(α,n)Zn , Zr(α,n)Mo , Sc(p,n)Ti , Cu(p,n)Zn , Nb(p,n)Mo , Ti(n,n)Ti Mo(n,n)Mo and Zn(n,n)Zn for the isotopes of the above elements, also we calculated the stopping power by using a (SRIM 2013), then the neutron yield was calculated from theoretical equations depending on most recent cross - sections (2010.2012), as well as this study focused on the extraction of a set of uniform empirical equations to calculate the neutron yield in directly for (α, n) and (p, n) reactions for these elements, and each of them includes 10 isotopes so the total reactions are 60. The result of neutron yield for these equations was in a good agreement with theoretical value which is calculated from the theoretical equations. These set equations with their coefficients were put within the MATLAB program, it was designed for this purpose and by depending on the element type, the type of reaction and incident particle energy to find the neutron yield for any isotope, their mass number is between (40 - 100) for energy range within the (15 - 50) MeV. This program can be developed to include a greater number of elements with their isotopes and for larger energy range.

تصنيع كواشف ضوئية باستخدام اوكسيد التيتانيوم المطعم باوكسيد الخارصين ذو التركيب النانوي بواسطه تقنية الليزر النبضd Fabrication of photovoltaic detectors using TiO2 doped with ZnO nanostructure by PLD technique

اسم المؤلف: ذرى طارق عباس
اسم المشرف: سمر يونس الدباغ
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: In this work, a Nd : YAG laser beam (λ=1064nm, repetition rate 6 Hz with the pulse duration 10ns) has been used to deposit thin films TiO2 pure and TiO2 doped with ZnO at different concentrations (2%, 5%, 7%) on glass and silicon substrates. The laser fluence is kept at 700 mJ/cm2 and the pressure is kept at 10 - 2 mbar to specify the optimum condition of deposition. TiO2 - ZnO thin films are investigated by using different techniques such as X - Ray Diffraction (XRD), Atomic Force Microscope (AFM), UV - VIS transmittance spectroscopy, Hall Effect and detector properties equipment.X - Ray Diffraction (XRD) results showed that by increasing ZnO concentration and annealing temperature (500°C) TiO2 transformed from amorphous structure to polycrystalline structure. AFM results showed that the RMS and the grain size was increased with increasing the concentration of zinc oxide. The root mean square (RMS) reachs to 15.2 nm at room temperature and after annealing temperature at 500°C reachs to 16.1nm. Also, the grain size increased with increasing ZnO concentration up to (100.12) nm at the concentration 7% after annealing temperature. UV - VIS transmittance measurements show that the transmittance were high in infrared region and decreases with increasing ZnO concentration and after annealing. Hall Effect is studied to estimate the type of carriers. From the results it was deduced that all (TiO2 : ZnO) films were n - type. As a result, it has been found that film structure and properties are dependent on annealing , as well as different concentrations.From the (I - V) measurements by using UV laser diode with a wavelength (385nm) found that the responsivity of the detector increased at concentration 7% reach to (3.39)A/W and after annealing in temperature 500°C reach (3.82)A/W.

دراسة تاثيرات خسارة الانحناءات لليف البصري في منظومة الاتصالات البصرية Study Effects of Optical Fiber Bending Loss in Optical Communication System

اسم المؤلف: دعاء هشام محمد
اسم المشرف: سمر يونس الدباغ
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا البحث , تم دراسة تاثير الانحناء على انتقال الاشارة الضوئية خلال الالياف البصرية. هذا العمل يتضمن قياسات الخسارة في القدرة خلال الليف البصري بوجود الانحناءات عند عدد لفات مختلفة من (1 - 10) لفة وعند اقطار انحناء مختلفة (12.5 , 10.5 , 8 , 6 , 4 , 3 , 2 , 1) cm. نوعين من الالياف البصرية تم استخدامها , الليف المتعدد الانماط (MMF ) باطوال مختلفة (1 , 20 , 40 , 100 , 120 , 140 ) m وليف احادي النمط بطول (4.5 m) .واستخدم نوعين من الليزرات ليزر دايود الاحمر (λ=650 nm) وليزر دايود اخضر (λ=532 nm).القدرة الضوئية تم قياسها باستخدام جهاز قياس القدرة. تشير النتائج ان كلما قل قطر الانحناء وزادت عدد اللفات فان الخسارة في القدرة الضوئية تزداد. حيث ان القدرة الضوئية لليزر الاخضر عند الطول الموجي (λ=532 nm) تقل من (48.083*10 - 4) mW الى (41.114*10 - 4) mW عند اللفة الاولى لليف متعدد الانماط بطول (40m) عندما تم حني الليف من cm12.5 الىcm 1. اما لليف الاحادي النمط, فان القدرة الخارجة لليزر الاخضر عند طول موجي (λ=532 nm) تقل من (13.608) mW الى (13.32) mW عند اللفة الاولى من طول (4.5) m لليف احادي النمط عندما تم حني الليف من 12.5 cm الى 3 cm . اظهرت النتائج ايضا ان تاثير الانحناء في القدرة الخارجة في حالة الليف المتعدد الانماط اكبر مقارنة بالليف احادي النمط. وكذلك النتائج لهذا البحث تتضمن تصميم وتنفيذ منظومة اتصال الالياف البصرية لفحص تاثير الانحناء على الاشارات المنتقلة خلال الالياف البصرية متعددة الانماط حيث لف من (1 - 10) لفة وعند اقطار انحناء مختلفة ( 1,2,3,4 ) cm . تم تضمين الاشارات باستخدام ليزر nm 532 .الاشارة تم ارسالها خلال ليف متعدد الانماط باطوال مختلفة وهذه الاشارة تم الكشف عنها باستخدام كاشف السليكون الضوئي (AEPX 65) . وجد ان الانحناءات تؤدي الى تغييرات واضحة في سعة ( جهد ) الاشارة الخارجه ؛ حيث يقل الجهد من 0.64volt الى 0.52 volt عند زيادة عدد اللفات من) 1 - (10 لفة في ليف بطول 40m وقطر الانحناء (1) cm.ويقل الجهد الى حد 0.2 volt في ليف بطول 140m وقطر الانحناء (1) cm.واخيرا الاشارات المنتقلة فيمنظومة الياف بصرية باستخدام كاميرا (CCD) واستخدام حاسبة شخصية معUSB TV STICK لرؤية تاثير الانحناء على انتقال الاشارات خلال الالياف البصرية. حيث ان الاشارة الخارجة ستقل من 0.68 volt الى 0.6 volt عندما عدد اللفات تزداد من (1 - 5) لفة في ليف بطول (1) m .اجرى احتساب كل من نسبة الاشارة الى الضوضاء ومعدل الخطا في نقل البيانات في للاشارات المنتقلة في منظومة الاتصالات عند اقصى طول لليف البصري 140m وعند اللفة 10 فكانت 115.147dB و3.68x10 - 27 على التوالي . بينما نسبة الاشارة الى الضوضاءSNR ومعدل الخطاBER في نقل البيانات في الاشارات المنتقلة باستخدام كاميرا CCD عند طول الليف البصري 1m وعند اللفة 10 فكانت 100.49dB و5.98x1o - 24 على التوالي .. اظهرت النتائج ايضا ان نسبة الاشارة الى الضوضاء تقل ومعدل الخطا في نقل البيانات يزداد بزيادة عدد اللفات في كلا المنظومتين | In this work, bending loss effects of optical fiber on the transmitted signal were studied.This work includes measurements of the power loss through optical fiber with the presence of bends at different wrapping turns (1 - 10) turns and at various bending diameters (12.5, 10.5, 8, 6, 4, 3, 2, and 1) cm. Two types of optical fibers were used, multimode optical fiber (MMF) of different lengths (1, 20, 40, 100, 120, 140) m and a single mode optical fiber (SMF) of length (4.5 m). Two optical sources were used, Red laser diode (λ=650 nm) and green laser diode (λ=532 nm). The output power was measured using an optical power meter. Results indicated that as the bending diameter decreased and the number of wrapping turns increased, the power loss increased. The output power of green laser diode at (λ=532 nm) decreased from (48.083*10 - 4) mW to (41.114*10 - 4) mW at the first turn of 40m MM fiber length when bent from (12.5 to 1) cm. For SMF, the output power of green laser diode at (λ=532 nm) decreased from (13.608) mW to (13.32) mW at first turn of (4.5) m SM fiber length when bent from (12.5 to 3) cm. The higher alteration output power in the case of multimode fiber has been deduced as compared with that of the single mode fiber. Also the results of the project involves a design and an implementation optical fiber communication system to investigate the effect of bending on the transmitted signals through multimode optical fiber wrapped (1 - 10) turns and at different diameters (1, 2, 3, 4) cm . Signals were modulated using 532nm laser diode then sent through multimode fiber of different lengths and detected by silicon photo detector (AEPX 65). The bending induces changes in the amplitude (voltage) of the output signal, the output voltage decreased from 0.64 volt to 0.52 volt when the no. of turns increased from 1 - 10 turns for 40 m optical fiber at a bending diameter of (1cm) and decreased to 0.2 volt for 140m multimode fiber at a bending diameter of (1cm).Finally, a transmitted signal in optical communication system has been built using CCD camera and Pc with USB TV STICK for monitory the effect of bending on signals that transmitted through optical fibers. The output transmitted signals decreased from 0.68 volt to 0.6 volt when the no. of turns increased from 1 - 5 turns for 1 m optical fiber. The calculations of signal to noise ratio (SNR) and Bit Error Rate (BER) for transmitted signals in optical communication system at maximum fiber length of 140m and 10turns are equal to 115.147dB and 3.68x10 - 27 respectively. While for transmitted signal form CCD camera at fiber length 1m and of 10 turns are equal to 100.49dB and 5.98x1o - 24 respectively.Results show that SNR decreased and BER increased as no. of wrapping turns increased for both systems.
1 ... 595 596 597 598 599 ... 965