Show: 25 50 75 100 Results

Search results: 25 out of 9,245

New Distributions on Proposed Classes == New Distributions on Proposed Classes

Author name: Bnadheer Dhea'a Mohammad Al_sultani
Supervisor name: Kareema Abed Al - Kadim Makrib Al - Khafaji
General topic: Mathematics
Specific topic: Mathematics
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: There are many important problems where the real data does not fit any of the classical or standard probability models, and the lifetime distributions have been used to model analyses the lifetime data in many applied sciences such as medicine, engineering, finance, biostatistics , reliability and survival analyses because a statistical analysis depends heavily on the assumed probability model or distributions.The distributions, generalization distributions there were derived in this thesis that can be used in life applications. It is hoped that findings of this work will be useful for the practitioners in various fields of theoretical and applied sciences. This thesis is our contribution in this field throughout finding these distributions .Three distributions are introduced, Rayleigh - Pareto distribution, Rayleigh - Lomax distribution and Uniform - Lomax Distribution, as well as discussion of some their important properties , and estimate their parameters. These distributions depend on the original distribution, Rayleigh distribution, Pareto distribution, Lomax(Pareto II) distribution, and Uniform distribution. The idea of the subject that is companied two distributions by one of the methods that are used to generalize distribution.Therefore there is an application using certain real data set to illustrate the usefulness of the proposed distribution to real data using MATLAB (R2011b) software.In the application of Rayleigh - Pareto distribution, we used real data set ,and make a compare between Rayleigh - Pareto distribution used in thesis with others distributions. Its appear that Rayleigh - Pareto distribution is the best in comparison with other distributions.Introduction The statistical distributions used to describe and interpret the phenomena, there are continuous motivations for developing these distributions to become more flexible or more fitting for specific real data sets. Because there are many important problems where the real data does not fit any of the classical or standard probability models."The lifetime distributions have been used to model analysis the lifetime data in many applied sciences such as medicine, engineering, finance, biostatistics , reliability and survival analysis because a statistical analysis depends heavily on the assumed probability model or distributions."So the aim of the thesis is to derive some distributions, generalization of distributions ,with of their properties, and estimating the parameters. One generalized distribution F(x) was defined as follows F(x)=I_G(x) (a,b)=(∫_0^G(x)▒〖w^(a - 1) (1 - w)^(b - 1) 〗 dw)/B(a,b) , 00 ,b

الصياغة التباينة التغايرية لمسالة القيمه الحدودية الحرة == The Variational Inequality Formulation for A Free Boundary Value Problem

Author name: عبد الله عبد الامير فاضل
Supervisor name: سحر محسن جبار
General topic: Mathematics
Specific topic: Mathematics
Degree: Higher Diploma
Language: English
University location: Babylon
First pages:
Abstract: يهدف هذا البحث بشكل اساسي الى دراسة المتباينة التغايرية للمسائل الحدودية ذات السطح الحر والتي تعتمد معادلة لابلاس مع الشروط الحدودية الحرة، لقد اعتبرنا المتباينة التغايرية الناقصية لمسالة السد المستطيل الشكل المبسطة، واعطينا التفسير الرياضي والفيزيائي وبعض خواص الحل | The main objective of this research is to study and present the variational inequality formulation of the free boundary value problems. The problems have been investigated and the boundary conditions of free type which are important parts in the partial differential equation area. The elliptic variational inequality for “A Simple Rectangular Dam Problem” is considered . The physical, mathematical interpretation and some properties of a solution are presented

دراسة تحليلية لبديهيات الفصل في الفضاءات التبولوجية المرنة == Analytical study of The Separation Axioms In Soft Topological Spaces

Author name: زهراء محمد نجم الركابي
Supervisor name: لؤي عبد الهاني السويدي
General topic: Mathematics
Specific topic: Topology
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: ان اهم ادوات العلوم في مختلف اختصاصاتها وانواعها والتي تعتبر الركيزة الاساسية هي نظرية المجموعات ، ونظرا للتطور الهائل في جميع مجالات الحياة والذي بدوره يولد مشاكل كبيرة ويحتاج الى حل والى ادوات موازية لتلك التطورات من اجل حلها ، لذا اخذ العلماء على عاتقهم تطوير نظرية الاعداد وفتح افاق جديدة ، حيث ظهر علم جديد هو (نظرية المجموعات المرنة ) التي اعتبرت الاداة المهمة لحل معظم المشاكل المستعصية او تجاوزها في تلك العلوم ومختلف اختصاصاتها الحياتية والاقتصادية والهندية والطبية وغيرها وكذلك دخلت نظرية المجموعات المرنة في علم التبولوجيا العامة بصورة قوية وفعالة في السنوات الاخيرة وظهر علم جديد هو (الفضاء التبولوجي المرن ) . ان الفكرة الاساسية في هذه الرسالة هي تعريف ( بديهيات الفصل في الفضاء التبولوجي المرن) وبوجه الخصوص عند نقطة معينة من المعلمات ودراسة اهم الخصائص والنتائج لها . | The important science tools in a different kinds and specialties , that considered the basic mainstay of ( the set theory ) and because of huge development in all life fields. This causes great problems , that need solution and parallel tools for those developments , so the scientis become responsible to work on the development of number theory and open new horizons , that a new science had appeared which is ( soft figures theory ) which is considered the important tool to solve most difficult problems or overcome them ,in these sciences and their specific life specialization , economy , medicine , geometry and others . Also the theory of soft numbers had entered in general topology in power full and active way . The last years a new science has appeared is ( soft topological space ). The main idea of this thesis is to define the separation axioms in ( soft topological space ) and practically in certain point , and to study the most important properties and results of it .

التقريب النسبي الرتيب للدوال في الفضاءL (p) عندما 0<p<1 == Monotone Rational Approximation Of Functions in L_p Space For 0<p<1

Author name: ضي باسم احمد العسماوي
Supervisor name: ايمان سمير عبد علي بهية
General topic: Mathematics
Specific topic: Mathematics
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: ركزنا في عملنا على التقريب الحافظ للشكل باستخدام متعددات الحدود النسبية للدوال في فضاءات L_p عندما p<1 .في بداية عملنا هذا قمنا بحل مشكله مقدمه من قبل الرياضياتي رونالد ديفور من خلال الكثير من محاضراته وسيمناراتيه لسنوات كثيره . اي اننا ناقشنراتبه التقريب الرتيب باستخدام متعددات الحدود النسبية للدوال في فضاءات L_p عندما p<1 عن طريق برهان مبرهنه مباشره للتقريب الرتيب النسبي للدوال في فضاءات L_p عندما p<1 .درس الباحث التقريب المحدب للدالة|x| باستخدام المعيار الكاذب L_p عندما p<1 من جهة ودرجه التقريب المحدب للدوال المحدبه في الفضاءات L_p عندما p<1 من جهة اخرى . | This thesis focues on the shape preserving approximation using rational polynomials, for functions in L_p - spaces, 0<p<1.In this work, we solve a problem raised by R. DeVore in several lectures for many years ago. It means we discuss the order of monotone rational approximation for functions in L_p spaces, for 0<p<1. We use rational approximation to prove a direct the over for monotone approximation on L_p - space for p<1. We study, The convex approximation to |x| in terims of L_p - quasi norm at one side and on the other side is studied the order of convex approximation will be discussed for convex functions in L_p - spaces for 0<p<1 ⦁

الانظمة الاولية المعممة مع امثلة قابلة للتطبيق == The Generalized Prime Systems With Applicable Examples

Author name: احمد عامر تايه القريشي
Supervisor name: فائز علي راشد المعموري
General topic: Mathematics
Specific topic: Mathematics
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: Analytic Number Theory is regarded as one of the main subjects in the core of the pure mathematics. Specifically, in the Analytic Number Theory, the generalized primes and generalized integers have been investigated and formally defined in 1937 by Beurling . Beurling state that for any real sequence 〖〖{p_i}〗_ 〗_(i=1)^∞ increasing with p_1 > 1 as p_i ⟶ ∞ as i ⟶ ∞ called a Beurling primes or generalized primes. That is, p_i called generalized primes (or Beurling primes) with the fact of the fundamental theorem of arithmetic (each n = ∏_(i=1)^k▒〖p_i^(a_i )〗^ where ai ϵ N0 (= N ∪{ 0 }) forming the generalized integers . In this thesis , we investigate the Beurling prime systems and introduce example which studied firstly by the Italian author Balanzario and addressed the modification of its method.Moreover, we study the connection between the counting function of Beurling integers N_P(x) and the Beurling zeta function ζ_P(s) with a concrete examples.

الخواص الدينمية لتطبيق هينون المطور == The Dynamical Properties of Modified Henon Map

Author name: حسين علاوي جاسم المسعودي
Supervisor name: سماح عبد الهادي الهاشمي
General topic: Mathematics
Specific topic: Mathematics
Degree: Higher Diploma
Language: English
University location: Babylon
First pages:
Abstract: In this work , we construct a new map in two dimensions which is called the Modified Henon map that is denoted by MH_(a,b) (■(x@y)) =(■(1+ax+cos⁡2πy@by)) has been presented .The dynamics of the MH_(a,b) is introduced. The MH_(a,b) has sensitive dependence on initial conditions and a positive Lypunove exponent (in some conditions ). The attractor of the Modified Henon Map and the Lyapunov dimension as fractal number are determined. The MH_(a,b) has a chaotic strange attractor and a positive topological entropy. The sensitive , Lyapunove exponent and strange att

استخدام تحليل شجرة الخطا الضبابي لانظمة المعوليـــــة (الموثوقية) المعقدة

Author name: شهاب احمد عبد الزهرة العنزي
Supervisor name: عدي صبري عبد الرزاق
General topic: Mathematics
Specific topic: Mathematics
Degree: Master
Language: Arabic
University location: Babylon
First pages:
Abstract: في هذه الرسالة تم دراسة تحليل نوعي وكمي لشجرة الخطا الضبابية وهي تقنية تكشف لنا حالة فشل الانظمة المختلفة والتي تعتمد على قوانين ابواب المنطق لايجاد مجاميع القطوع الصغرى التي تسبب فشل النظام. بعد بناء شجرة الخطا فان العديد من الاحداث الاساسية التي يمكن ان تحدث من الناحية النظرية لم تحدث او حدثت بشكل نادر بحيث ان المعلومات ليست متوفرة. يمكن ان يصف استخدام الاحتمال الضبابي احتمال الفشل والشكوك من اي حدث اساسي. ومن بعد ذلك يخمن احتمال حدوث الحدث الرئيسي الذي يستعمل بعض العمليات الرياضية. تم تحليل شجرة الخطا الضبابية ثم مناقشة التحليل النوعي والتحليل الكمي من خلال ايجاد اصغرمجاميع قاطعة وتخمين معولية النظام باستخدام منطق المجموعة الضبابية, حيث ان مركبات النظام ممثلة بها مع امثلة توضيحية تبين ذلك.

الدوال ذات القيم المزدوجة مع بعض الحلول الممكنة == Multi - Valued Functions With Some Possible Solutions

Author name: حسنين جدوع رزوقي جنجون
Supervisor name: فائز علي راشد المعموري
General topic: Mathematics
Specific topic: Mathematics
Degree: Higher Diploma
Language: English
University location: Babylon
First pages:
Abstract: في حقل التحليل العقدي هنالك الكثير من المشاكل الرياضية. بعض منها تم حله كما في تعدد قيم المخرجات للدالة المركبة. وبعض منها بقى مشكلة مفتوحة كما في فرضيات ريمان بقيت مفتوحة منذ 1858 . في هذا العمل نبحث مشكلة تعدد قيم الدالة المركبة ونعطي بعض الامثلة. هذه الامثلة تبين حل تعدد القيم لدالة ريمان وكيفية معالجتها. | In the field of complex analysis there are so many problems. Some of them have been solved after a hard work such as " the multi - valuedness problem " and other left open problem such as " the Riemann - hypothesis " since 1858. In this work. We investigate the multi - valuedness problem and address the possible solution with some examples that showed the solution of the multi - valued problem of the Riemann - zeta function.

شبه الموديولات تامة الاستقرارية == FULLY STABLE SEMIMODULES

Author name: حيـدر عباس عبد الامير
Supervisor name: اسعد محمد علي الحسيني
General topic: Mathematics
Specific topic: Mathematics
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: نفرض M شبه موديول معرف على شبه الحلقة R. شبه الموديول الجزئي K من M يقال انه مستقر اذا f(K) K لكل تشاكل f : K → M. شبه الموديول M يسمى تام الاستقرار اذا كل شبه موديول جزئي K من M هو مستقر. ان مفهوم شبه الموديول تام الاستقرارية هو تحويل من الموديول التام الاستقرارية. نقدم في هذا العمل مفهوم شبه الموديول الجزئي المستقر وشبه الموديول تام الاستقرارية وندرس الشروط التي نحتاجها لنحصل على خصائص وصفات مشابهه كما في الموديولات. بالاضافة الى ذلك، سنناقش خاصية الحذف لشبه الموديولات تامة الاستقرارية المنتظمة، لكن اولا الاستقرارية التامة من المجموع المباشر من شبه الموديولات تامة الاستقرارية تحت شروط معينة لتصبح تامة الاستقرارية نوقشت. كذلك العلاقة بين الاستقرارية التامة لشبه الموديول ومعيار بير درست. فضلا عن ذلك، مفهوم شبه الموديولات الجزئية الكاذبة الاستقرارية وشبه الموديولات التامة كاذبة الاستقرارية كتعميمات الى مفهومي شبه الموديولات الجزئية المستقرة وشبه الموديولات تامة الاستقرارية على الترتيب درست. بعض الخصائص والصفات لشبه الموديولات التامة كاذبة الاستقرارية حصلت. | Let M be a semimodule over a semiring R. A subsemimodule K of M is said to be stable if f(K) K for each homomorphism f : K → M. A semimodule M is called fully stable if each subsemimodule K of M is stable. The concept of fully stable R - semimodule is converted from the fully stable R - module. In this work, the concept of stable subsemimodule and fully stable semimodule will be introduced and studied, investigating the conditions that will be needed to get properties and characterizations similar or related to the case in modules. Moreover, we will discuss the cancellation property for uniform fully stable semimodules, but first the full stability of the direct sum of fully stable semimodules under certain conditions to be fully stable is discussed. Also, the relationship between full stability of the semimodule and the Baer criterion is studied. Furthermore, the concept of pseudo - stable subsemimodules and fully pseudo - stable semimodules as a generalizations of the concepts of a stable subsemimodule and a fully stable semimodule respectively are studied. Some properties and characterizations of fully pseudo - stable semimodules are obtained

للشبكات العصبية L - p الرتبة الاساسية لتقريب == The Essential Order of L_p Approximation for Neural Networks

Author name: عمر عبد الكريم رحومي السماك
Supervisor name: ايمان سمير عبد علي بهية
General topic: Mathematics
Specific topic: Mathematics
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: درسنا في هذه الرسالة درجة التقريب الافضل باستخدام الشبكات العصبية للدوال في الفضاءات L_p ,p>0 . قمنا بتعريف الدالي K ومقياس نعومة من الدرجة r باستخدام مؤثر دونكل بعدها برهنا بنظرية ان هذين التعريفين متكافئين .استخدمنا هذه النظرية لبرهان مبرهنة مباشرة واخرى معاكسة لها للتقريب باستخدام الشبكات العصبية المنتظمة للدوال المعرفة على الفضاءات الاقليدية والتي تنتمي الى الفضاء L_p ,p<1 . ثبتنا الاوزان في الشبكات العصبية العقربية للحصول على مبرهنات مباشرة يمكن استخدامها بسهولة في التطبيقات الهندسية | This thesis consists of essential rate estimation of approximation using neural networks for functions in L_p spaces for p>0 . To prove our results for approximation using regular neural networks we need to introduce an equivalence estimation between K - functional and r - th modules of smoothness in terms of an improvement version of Dunkl operator . Using the equivalence estimation between the K - functional and r - th modules of smoothness , we guarantee a highest approximation accuracy using regular feed ford word neural network using special classes of neural network for functions in L_p spaces for p<1 defined on any subset of the d - Euclidean spaces . The weights are fixed in the radial bases functions neural networks to have facilities in applications and prove direct theorem using radial basis function neural networks for functions in L_p spaces for p≥1 .

التقييم الجيوتكنيكي ومدى صلاحية اطيان تكوين انجانه (المايوسين الاعلى) في محافظة النجف الاشرف لاغراض صناعة طابوق البناء == Geotechnical evaluation of claystone rocks in Injana Formation (upper Miocene) and it’s suatibility for Bricks production

Author name: سمهر عامر رضا مخيف ال مخيف
Supervisor name: جعفر حسين علي الزبيدي
General topic: Geology
Specific topic: Geology
Degree: Master
Language: Arabic
University location: Babylon
First pages:
Abstract: تناول البحث دراسة الصخور الطينية لتكوين انجانه (المايوسين الاعلى ) في محافظة النجف الاشرف وسط العراق بواقع (15) محطة وشمل عدة جوانب حقلية ومختبرية ومكتبية ففي الجانب الحقلي تم جمع معلومات عن المنطقة ووصف المحطات والنمذجة لاجراء الفحوصات والتحاليل المختبرية المطلوبة ، اما في الجانب المختبري فتم اجراء الفحوصات الجيوتكنيكية والتي تضمت الخواص الفيزيائية ،الهندسية ،الكيميائية والمعدنية للصخور الطينية وتقييمها لاغراض صناعة طابوق البناء الطيني.اظهرت الفحوصات الفيزيائية ان نسبة الاطيان تتراوح بين (50.2 - 83.9) %ونسبة الغرين تتراوح بين (15.9 - 40.9 ) %ونسبة الرمل (0 - 8 ) %,بينما حد السيولة يترواح بين (31 - 65) %,وحد اللدونة يتراوح بين(16 - 32)%, ومعامل اللدونة يتراوح بين(12 - 38)% ,وحد اللصوقة يتراوح بين (20 - 41)%, ومعامل ريك يتراوح بين(3 - 10) %, كما تبين من نتائج حد السيولة ودليل اللدونة ان تصنيف التربة بالاعتماد على التصنيف الموحد للترب ( USCS ) ان الطبقات الاعلى هي من النوع (CH) اي الاطيان عالية اللدونة والطبقات الاسفل هي من النوع ((CL اطيان قليلة اللدونة , وان الكثافة الكلية تتراوح بين (1.8 - 2.1) غم/سم3 .والوزن النوعي يتراوح بين (2.7 - 2.81) وان نسبة المسامية تتراوح بين (31.91 - 47.89) %,وان قيم التماسك تتراوح بين (25 - 70) وقيم زاوية الاحتكاك الداخلي (9° - 28.5° ) . واظهرت نتائج التحليل الكيميائي ان نسبة اكاسيد السيليكا هي الاعلى وتليها اكاسيد الكالسيوم والالومينيوم والحديد والمغنيسيوم والبوتاسيوم والصوديوم والكبريتات كما اظهر الفحص المعدني بحيود الاشعة السينية (XRD) سيادة المعادن غير الطينية الكوارتز والكالسايت والفلدسبار بينما سادت المعادن الطينية المونتموريلونايت والالايت والكاؤولينايت.قيمت اطيان تكوين انجانه لاغراض صناعة طابوق البناء الاعتيادي وباستخدام اضافة الرمل بنسبة (10و15)% ,بينما استخدم قشور الرز بنسب (5،2.5)%لصناعة طابوق بناء ذات مواصفات افضل في الخواص الفيزيائية والهندسية والكيميائية حيث اعدت (600) عينة بطريقة الكبس شبه الجاف وحرقت بدرجات حرارة (850°و1050°) على وفق برنامج حرق يتضمن رفع درجة الحرارة (5م°/دقيقة ) وبزمن انضاج قدره ثلاث ساعات. واظهرت النتائج ان المادة الاولية جيدة النتائج ولكن النتائج اظهرت تحسنا كبيرا في خواص العينات عند اضافة (10)% من الرمل واضافة (2.5)% من قشور الرز من ناحية امتصاص الماء ومقاومة الانضغاط والتزهر وتم الحصول على الصنف (A ) عند مقارنتها مع المواصفة القياسية العراقية( 25 لسنة 1993) والمواصفة القياسية الامريكية C62 - 10 2010))توصي الدراسة بتقدير احتياطي الاطيان في تكوين انجانه وتقييمها من الناحية الاق | The research studied claystone of Injana Formation (upper Miocene) in the Najaf governorate in middle of Iraq,(fifteen) stations were taken and the search included several aspects field, laboratory, and office aspects In the field work information about the region were gathered and the stations were described and model work to conduct the required tests and laboratory analyses. The laboratory work included the geotechnical tests to evaluate the physical, engineering, chemical and mineralogical properties of claystone and determine .its suitability the mud brick used in the construction industry.Physical tests showed that the percentage of clay is ranging from (50.2 - 83.9) and the percentage of silt is between (15.9 - 40.9) and while the sand is between (0 - 8%), the liquid limit ranges between (31 - 65), and the plastic limit between (16 - 32),while the plastic index between (12 - 38), The Stikicy limit between (20 - 41), and the Rieke index between (3 - 10), The results of the liquid limit and plastic index that of the upper indicate the soil classification while., based on the Unified Soil Classification System (USCS), is type(CH) the clays high plasticity, and the lower layers are of the type (CL) and low Clays plasticity, The bulk density ranging from (8.1 to 1.2) gm / cm 3 and the specific gravity is between (2.7 - 2.81 ) ,while porosity value are between (31.91 - 47.89%), and that the cohesion values are between (25 - 70) ,while the values of internal friction angle are between(9 ° - 28.5 °).The results of the chemical analysis that showed the silicate content is the highest, followed by the, calcium, aluminum, iron, magnesium, potassium ,and sodium oxide sulfates .The X - rays diffraction (XRD)test showed the non - clay minerals, quartz, calcite, and feldspar,are dominant while minerals Montmorillinite , Illite and kaolinite are the dominant in the clay minerals.The Claystone of Injana formation for the purposes of brick construction industry is evaluated by Adding by (10&15%) of sand, while the percentage the husk of rice added is (5&2.5%) in order to manufacture bricks with the best specifications in the physical, engineering and chemical properties (600) samples were prepared by using the semi - dry press method and heating, are temperatures (850°&1050°) in accordance with the buruing program that includes raising the temperature (5c°/ min) and three hours soaking time .The results showed that raw materials was good but the results a significant improvement of the samples when (10%) of sand and (2.5%) from the husks rice and added in terms of water absorption and compressive strength and efflorescence (A) and type A is obtained when it is compared with the Iraqi standard (25 of 1993) and the American standard (C62 - 10 2010).The study recommends estimating the reserves of claystone in the Injana formation and the economic evaluate of clays, and its show suitability as Quarries and the establishment of factories for the purposes of ceramic industries.

دراسة تاثير اضافة اوكسيد الخارصين النانوي (ZnO) على الخواص الكهربائية للبولي ستايرين (PS) == Study the Addition effect of Nano Zinc oxide (ZnO) on the Electrical properties of Polystyrene (PS)

Author name: موسى محمد علي الموسوي
Supervisor name: بهاء حسين صالح ربيع المرعب
General topic: Physics
Degree: Higher Diploma
Language: Arabic
University location: Babylon
First pages:
Abstract: تم في هذا البحث تحضير متراكب (بولي ستايرين - اوكسيد الخارصين النانوي)(PS - ZnO) باستخدام طريقة الصب (Casting method) وبتراكيز مختلفة من المضاف( اوكسيد الخارصين النانوي ZnO) الى المادة الاساس (PS) . وقد تمت دراسة الخواص الكهربائية ( المتناوبة) لهذا المتراكب (PS - ZnO) اذ تم دراسة التالي : • تاثير تغير التركيز للمضاف في التوصيلية الكهربائية المتناوبة للمتراكب . • تاثير تغير تردد المجال الكهربائي المتناوب المسلط على الخصائص الكهربائية المتناوبة . • في ما يخص الخواص الكهربائية المتناوبة فان ثابت العزل الكهربائي والفقدان العزلي لمتراكب(PS - ZnO) فانهما ينقصان مع زيادة تردد المجال الكهربائي المسلط ويزدادان مع زيادة التركيز للمادة المضافة (ZnO) .• وكذلك فيما يخص بقية الخواص الكهربائية المتناوبة بينت النتائج ان التوصيلية الكهربائية المتناوبة للمتراكب (PS - ZnO) تزداد بزيادة تركيز المضاف (ZnO) للمادة الاساس(PS) , وكذلك تزداد زيادة كبيرة عند زيادة الترددات للمجال الكهربائي المسلط من 1KHz - 5MHz, وتزداد زيادة قليلة ( اشبه بالثابتة تقريبا) عند الترددات العالية هي ما فوق MHz 1.5.• بينت النتائج ان التوصيلية الكهربائية المتناوبة عند زيادة التركيز للمادة المضافة (ZnO) تصل توصيلية المتراكب الى حدود توصيلية المواد شبه الموصلة اي تصل الىΩ.cm) - 1) 10 - 8. | In the present work, the poly styrene - nano zinc oxide has been prepared by using casting method and in different concentrations of nano zinc oxide to the principal material. The alternative electrical properties of PS - ZnO composite has been studied such that The effect of change of concentration for added material or the alternative electrical conductivity for composite. The effect of change of frequency of alternative electric field and change of concentration of added material on the alternative electrical properties. The dielectric properties of PS - ZnO composite decrease with increasing of electric field frequency and increase with increasing of concentration of added material. The results show that the alternative electrical conductivity of PS - ZnO composite increase with increasing the concentration of added material (ZnO), also more increase with increasing the frequencies of electrical field from 1KHz - 5MHz and slow increase in high frequencies up to 1.5MHz.The results shows the alternative electrical conductivity approach to semiconductor conductivity when the added material concentration increase. (σA.C≈1E - 08) (Ω.CM) - 1

تاثير الحجم الجزيئي لاسود الكاربون على الخواص التخميدية لمتراكبات البيوتادين == Effect of carbon black particles size on the damping properties of Butadiene composites

Author name: فرزدق كريم عبد معين
Supervisor name: سمير حسن هادي النصراوي
General topic: Physics
Specific topic: Physics
Degree: Higher Diploma
Language: English
University location: Babylon
First pages:
Abstract: تم في هذا البحث دراسة تاثير الحجم الجزيئي لاسود الكاربونN326 ,N375 N660) ) على الخواص التخميدية (Rebound Resilience , damping time) واالخواص الميكانيكية (hardness , Specific Gravity) للمطاط الصناعي BRcis المعروف باسم بونا . حيث تم تحضير وتصنيع عجنات مطاطية تتكون من المطاط الصناعي BRcis كمادة اساس . اما بالنسبة لمواد التقوية او المالئات Fillers فهي اسود الكاربونCarbon black (N326 ,N375 N660) . تضمن البحث تحضير 13 عجنة تكون فيها نسب المطاط الصناعي BRcis في كل عجنة (pphr 100( ونسب اسود الكاربون (N326 ,N375 ,N660) كالاتي PPHR ( 0 ,10 ,20 ,30 ,40 ) لكل نوع من انواع اسود الكاربون .حيث اجريت جميع الفحوصات الميكانيكية والتخميدية كلا حسب ASTM الخاصة بها مثل الصلادة بواسطة(IRHD ) حسب المواصفة ASTM D1415 كذلك الوزن النوعي بواسطة جهاز (Densitron) بالاضافة الى الخواص التخميدية مثل الارتدادية او الرجوعية وكذلك زمن التخميد تم قياسهما بواسطة جهازTripsometer) ) حسب المواصفة ASTM D1054. واجريت الفحوصات بعد فلكنت العجنات . لقد اظهرت اختبارات الصلابة (Hardness) والثقل النوعي(Specific Gravity) ان المطاط المدعم باسود الكاربون (N326) اكثر صلابة وثقل نوعي من النوعين (N375 , N660) . وكذلك اظهرت اختبارات الارتدادية (Rebound Resilience) وزمن التخميد (damping time) ان المطاط المدعم باسود الكاربون (N326) يكون اقل ارتدادية وزمن تخميد من النوعين (N375 ,N660) . | In this study the effect of the molecular size of the Carbon black N326, Carbon black N375,and Carbon black N660 on the damping properties (Rebound Resilience, damping time) and Mechanical properties(hardness , specific gravity) synthetic rubber BRcis known as Bona . especially in the tire making .It was prepared and manufacture integration rubber consisting of synthetic rubber BRcis as a basis. As for the material, Fillers are Carbon black N326 , Carbon black N375 , and Carbon black N660 The research includes the preparation of 13 batch where synthetic rubber ratios be BRcis in each batch 100 Per part hundred Rubber(PPHR) , ratios Carbon black N326, Carbon black N375, and Carbon black N660 follows 0, 10, 20, 30, 40 (Per part hundred Rubber)(PPHR) , for each type of black carbon. Where conducted All mechanical tests and damping both by their own American Society for Testing Material (ASTM) such as hardness by International Rubber Hardness Degree (IRHD) according to standard ASTM D1415 as well as the specific gravity by a device (Densitron) in addition to the properties of damping such regressive or reactionary as well as the damping time was measured by (Tripsometer) device according to standard ASTM D1054. The tests were conducted after Vlkint integration. Hardness tests have shown and specific gravity The subsidized rubber Carbon black N326 more solid and specific gravity of the types N375, and N660. the tests showed Rebound Resilience and damping time that the rubber Compatible Carbon black N326 be less regressive and time damping of types N375, and N660

الخصائص التركيبية والالكترونية لشرائط نانوية من الفسفورين المطعم باستعمال حسابات المبادئ الاساسية == Structural and Electronic Properties of Doped Phosphorene nanoribbons using First - Principle Calculations

Author name: سارة جليل احمد
Supervisor name: حمد رحمن جبر
General topic: Physics
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: The doping effect of boron, aluminum, and carbon on black and blue phosphorene nanoribbon (PNRs) is investigated using density functional theory (DFT) in the framework of Perdew, Burke, and Ernzerhof (PBE) functional with 6 - 31G basis set. The effect of doping on the total energy, band gap, ionization potential, electron affinity, Fermi energy, highest occupied (EHOMO) and lowest unoccupied molecular orbital (ELUMO), and density of state have been studied. The results show that the values of the ionization potential, electron affinity and Fermi energy for pristine black PNRs are larger than those of pristine blue PNRs. Also, the energy gap for pristine blue PNRs is slightly smaller than those of pristine black PNRs. In general, the pristine PNRs is a semiconductor with energy gap of blue phosphorene )0.0184( and energy gap of black phosphorene (0.0185) eV. Our results indicate that the highest value of EHOMO is for black phosphorene ( - 5.60eV), these values show that a propensity of phosphorene to donate electrons and smaller value of ELUMO is for blue phosphorene ( - 5.58eV), these values show that a propensity of the phosphorene to accepter electrons. We found that the doping of phosphorene nanoribbon with boron and carbon leading to increase in the energy gap, and the increasing in black phosphorene is very small. On the other hand, the energy gap of aluminum doped phosphorene are smaller than those of pristine for black phosphorene while the energy gaps of aluminum doped phosphorene are larger than those of pristine for blue phosphorene. In the aluminum doped phosphorene, the highest of peaks becomes less, the conduction and valence bands are less with the highest number of density of states. The results also show fluctuations in the converged energy gap and valence bandwidth of black and blue phosphorene due to shape variation. Finally, it is concluded that band gap of phosphorene nanoribbon depends strongly on the type of addition

الخصائص المفتاحية للبولي اكريليت Switching Properties of Poly - acrylate == switching properties of poly - acrylate

Author name: رائد صالح مجهول
Supervisor name: خالد حسن بدر العمار
General topic: Physics
Degree: Higher Diploma
Language: Arabic
University location: Babylon
First pages:
Abstract: هذا البحث تم دراسة الخواص الكهروبصرية للبولييمر السائل ذو سلسلة جانبية حيث تكون العمود الفقري له من مادة بولي اكرلايت وترتبط معه جانبا مجموعة ميزوجينيه ذات مجموعة راسية CN والتي تعزى لها تباين الخواص العزلية الموجبة المجموعة الميزوجينية مع العمود الفقري يستخدم الفاصل المرن من وحدات المثيل CH2ان الخلايا الكهروبصرية النيماتية التي تم تحضيرها هنا ذات موجية استوائي ولاجل كشف التغيرات الحاصلة داخل الكهروبصرية استخدمنا طريقة انتقال فريدريك حيث تم دراسة عينه من مادة بولييمر وايجاد خواص المفتاحية للبولييمر من خلال دراسة تاثير درجة الحرارة على طول الفاصل والفولتية المسلطة على الخواص الكهروبصرية للبولييمر ان زيادة طول الفاصل المرن يؤدي الى نقصان في الفولتيات العتبة وفولتيات التوجية الكامل (فولتيات التشغيل )كما تبين ذلك ان ازمان الاستجابة للبوليمرات الثلاثة تتناسب طرديا مع طول الفاصل كما تم اثبات ان زيادة الفولتيات المسلطة تؤدي الى نقصان ازمان التشغيل (turn on time) ولا تؤثر على ازمان القطع (time turn off) . | In this research , the electro - optical properties of the liquid polymer with bilateral chain have been studied in which its backbone is of poly - acrylate and it is connected bilaterally with mazojinah group with anchored group C - N which is attributed for variation of the isolation positive properties for the almizojinah group with a backbone that uses a flexible separation of the methyl units CH2.The electro - optical nematic cells prepared with a tropical wave and for the sake of detecting changes taking place inside electro - optical, the researcher has used Frederick method of transmission where a sample of the polymer material has been studied and found key properties of the polymer through the study of the effect of temperature on the length of the interval and voltages hanging over the electro - optical properties of the polymer, the increase in the length of the flexible interval leads to a decrease in the threshold voltages and voltages full guidance (operating voltages).The times of the response of the three polymers are directly proportional to the length of the interval and it is also proved that the increase of the voltages meted leads to a decrease in ( turn on times) and it does not affect (turn off times).

تاثير التقوية بالاطيان على بعض الخصائص للمتراكب بوليمري PS - PVA == Effect of clays reinforcing on some Properties of polymer composite

Author name: حسين حيدر حسين
Supervisor name: فؤاد شاكر هاشم الجبوري
General topic: Physics
Specific topic: Physics
Degree: Higher Diploma
Language: Arabic
University location: Babylon
First pages:
Abstract: من خلال البحث تبين ان اضافة مسحوق معدن الكاوؤلينايت الى بوليمر ( PS - PVA)ادى الى تحسين الخصائص نتيجة لظهور تغييرا مستمرا في الخصائص البصرية.اظهرت قياسات FT - IR ان المواد المستخدمة في البحث ( البولي ستايرين والبولي فينيل الكحول) بدرجة عالية من النقاوة وهي مطابقة للمواصفات العالمية المعمول بها. التحليل المعدني لمسحوق طين الكاؤولين بواسطة تقنية XRD يدل على ان المكون الرئيسي في المادة المالئة هو معدن Aluminum silica Hydroxide Al2 Si2O5 (OH) 4 وعدم وجود اي نسب من الاكاسيد والاملاح غير المرغوب فيها.اعلى قيمة للامتصاصية في المنطقة فوق البنفسجية اي ضمن المدى (200 - 270) nm وتبلغ ذروتها عند الطول الموجي250 nm لاغشية متراكب PS مع مضاف مسحوق معدن الكاوؤلينايت المحفز بعدها يكون البوليمر نافذا للضوء ولجميع النماذج . لذا يعتبر البوليمر مادة ماصة جيدة للموجات فوق البنفسجية فيستعمل لاغراض الحماية او غطاء واقي من اشعة الشمس فيمكن استخدامه لخزن الادوية وطلاء الاطارات لمنع وصول الاشعة فوق البنفسجية لهذه المواد. كذلك يمكن صنع نظارات شمسية من المتراكب البوليمري لغرض حماية العين البشرية من الاشعة فوق البنفسجية بسبب نفاذيتها القليلة لها تقل فجوة الطاقة لاغشية متراكب PS مع مضاف مسحوق معدن الكاوؤلينايت المحفز وهذا يعود الى زيادة المستويات الموضعية بين حزمتي التكافؤ والتوصيل لذا يمكن ان تستخدم في صنع متحسسات وكواشف بوليمرية وكذلك في الخلايا الشمسية. | The studying it is showed that adding the powder of(kaolin metal to polymer PS which is caused to improve the particulates because of appearing continuous changing in optical properties. FTIR measurements cleared that the used materials through the search (polystyrene and polyvinalcahol with a high degree of pureness which is conformable with inform international specification. The metallic analysis of kaolin clay by (XRD) technique points that the main component in the surfeited is the metal of Aluminum Silica Hydroxide Al2 Si2O5 (OH)4 with out any rate of unwanted oxide or salts . High degree of absorption during ultrasonic radiation area other way during (200 - 270) nm range which reaches the climax at wavelength 250nm superposed filmy PS with adding kaolin metal powder catalyzer, the polymer becomes light traverse for all kinds. So the polymer considers as a good absorbent material for ultrasonic wave that uses for protection and as a faceplate from sunbeam , it also can be used for medicine storage ; tyres painting to protect from ultrasonic radiation and sunglasses production to protect the eye from ultrasonic radiation because of its low permeability . The energy gaps of superposed filmies becomes less PS with adding catalyzer kaolin metal powder and this happens between equivalent bunches and conductance , So this can be used to produce sensors and polymer detect as well as solar cell.

تحضير ودراسة الخصائص البصرية اللاخطية لمواد بلورية سائلة نيماتية مطعمة بجسيمات نانوية == Preparation and Study Non - linear Optical Properties of Nematic Liquid Crystal Materials Doped by Nanoparticles

Author name: بان علي ناصر غالب
Supervisor name: عبد العزيز عبيد موسى العكيلي | ياسين حسين كاظم
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Babylon
First pages:
Abstract: The present research include preparation the nematic liquid crystal materials doped with nano materials and studies the structural ,linear and nonlinear optical properties, for using it in field of nonlinear optics. Many properties of liquid crystal can be improved and enhanced by doping with nanoparticles materials, which are favorable for practical applications.Nematic liquid crystals (NLCs) (pure and doped) good materials for field of nonlinear optics (NLO) and its applications because of their large non - response nonlinearity and their extended spectral transparency.In this work, preparation of two compounds (ligands) of liquid crystal Schiff's bases derived from benzidine and hydrazine (Di - Cinnamylidene Benzidine) (B1) , (Bis - 4 - Methoxy - Benzyldene - Hydrazine) (B2) , and their complexes with bivalent ions (Cu, Ni, and Zn), take samples (M1B1,M2B1,M3B1, M1B2,M2B2 and M3B2) nanoparticles materials respectively, were carried out. As well as thin films of solutions of two materials (Di - Cinnamylidene Benzidine) and (Bis - 4 - Methoxy - Benzyldene - Hydrazine) and their complexes have been deposited on glass substrates, the samples prepared from solutions via spin - coating method at (10 - 3 M).The ligands and their complexes have been characterized by using FT - IR spectra and polarized optical microscopy (POM) to study liquid crystalline behavior, which has shown that the compounds have liquid crystalline properties belong to enantiotropic nematic phase (bi case media).The crystal structure has been studied for all prepared samples by using X - Ray diffractometer (XRD) ,and it has shown that ligands have polycrystalline structure. The complexes (M1B1,M2B1,M3B1 and M2B1) have monoclinic structure .The complex (M1B2 ) have orthorhombic structure, and the complex (M3B2) have amorphous structure.Atomic force microscopy (AFM) measurements for all samples show that the grain size ranging from (70 - 89) nm.The linear optical properties for all prepared samples have been studied, a study of UV - VIS spectra for different concentrations for each material dissolved in absolute ethanol solvent (9×10 - 5,8×10 - 5,7×10 - 5, 6×10 - 5, 5×10 - 5 and 4×10 - 5) M ,then study of absorption and transmission spectra for all prepared thin films at 10 - 3 M. The results showed when the concentrations increased the absorbance also increased for the same wavelength. The opposite relationship was observed for transmittance.The nonlinear tests calculated used (Z - Scan) technique in two cases (Close aperture) and (Open aperture) for obtain nonlinear refractive index coefficient (n2) and nonlinear absorption coefficient (β).The measurements performed using diode pump solid state laser operating at (473 nm) wavelength. The results showed an increase both of the nonlinear refractive index coefficient and nonlinear absorption coefficient, when increasing concentrations for all samples of liquid crystal material(solutions and thin films).The nonlinear refractive index increased linearly with the nonlinear phase shift .The thin films possess large linear and nonlinear optical properties as compared with liquid crystal as solution.The result imply that thin films of pure nematic liquid crystal and its complexes can be used as a potential medium for various optoelectronic applications including that in optical power limiting. The result show that the optical power limiting threshold is inversely proportional to the concentration of solution for all prepared samples.

دراسة نظرية لجزيئة صبغة الكركمين الطبيعية == Theoretical Study of Natural Curcumin Dye Molecule

Author name: حسين علي مدلول ضاحي
Supervisor name: حيدر محمد عبد الجليل | موسى كاظم محسن
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: تم تركيز البحث في هذه الرسالة لحساب الخواص الهيكلية والالكترونية والحرارية والطيفية لصبغة الكركمين الطبيعية والتي توجد في صيغتين ايزوميريتين صيغة الكيتون والاينول باستخدام نظرية دالية الكثافة عند المستوي B3LYP مع دوال اساس مختلفة . تم تنفيذ جميع العمليات الحسابية باستعمال برنامجGaussian 09 وبرنامج Gauss View 5.0.انتقال ذرة الهيدروجين من مجموعة الميثيلين المركزية(CH2) لترتبط بذرة الاوكسجين حتى تشكل اصرة هيدروجينية(O - H) يسبب تغيرات هندسية في شكل الايزوميرين, حيث شكل الاينول هي تركيب خطي تقريبا ولكن شكل الكيتون ليس خطي تماما. هذا يعود الى تشكل اصرة الهيدروجين, بالاضافة الى وجود هذه الاصرة في البنزين. وبالتالي الاواصر الهيدروجينية تؤدي الى تغير الخواص الفيزيائية للايوزوميرين. الدالة 6 - 311G+(d,p) اعطت نتائج جيدة للحسابات ولكن تم استخدام الدالة6 - 311G(d,p) لطيف UV - VIS. مجاميع الميثوكسي (OCH3) تاثيرها بسيط على المدارات الجزيئية. كذلك حسابات كل من الطاقة الكلية وطاقة اعلى مدار جزيئي ممتلئ وفجوة الطاقة اكدت ان الكيتون هو اكثر استقرارا من الاينول. وايضا الكيتون لديه قابلية عالية لقبول الالكترونات كما ثبت من خلال قيم كل من طاقة اوطا مدار جزيئي غير ممتلئ والكهروسالبية.من خلال نتائج طيف UV - VISتبين ان حزم الامتصاص تلاحظ في منطقة الاشعة فوق البنفسجية(UV). | The focus of the research for this thesis has been the calculation of the structural, electronic, thermal and spectroscopic properties of natural curcumin dye which exist in two isomers, ketone and enol forms, by using density functional theory (DFT) at B3LYP level with different basis sets. All calculations were performed with Gaussian 09 program and Gaussian view 5.0.8 program.The hydrogen atom transfer from the central methylene (CH2) group to oxygen atom to form intra - molecular hydrogen (O - H) bond causes geometrical changes in two isomers; where the enol form is structure approximately planar but not completely planar for the ketone form, this is due to the existence of the strong intra - molecular hydrogen. In addition to that the intra - molecular hydrogen also presence in benzene rings. Therefore leads to change the physical properties of two isomers.The results showed that the 6 - 311G+(d,p) basis set gave satisfactory results for calculations. But for UV - VIS spectral has been used the 6 - 311G(d,p) basis set. The methoxy groups (OCH3) have a small influence on the high occupied molecular orbital (HOMO) and the energy of lower unoccupied molecular orbital (LUMO). Also the findings of each of the total energy, the energy of the high occupied molecular orbital and energy gap confirms that the isomer ketone is more stable than to the isomer enol. Also the ketone has a high electron - accepting, as was proven by the values of the energy of lower unoccupied molecular orbital and electronegativity. Through the results of the UV - VIS spectral showed that the absorption peaks were seen at the UV region

الاتصالات الفوضوية في ليزر شبه الموصل النقطي الكمي باستخدام التغذية العكسية البصرية == Chaotic Communication of Quantum Dot Semiconductor Laser with Optical Feedback

Author name: افراح ياس حمدان الدليمي
Supervisor name: باسم عبد اللطيف غالب
General topic: Physics
Degree: Master
Language: Arabic
University location: Babylon
First pages:
Abstract: يعتبر ليزر شبه الموصل النقطي الكمي البداية الجديدة في تطورات الليزر , وليزر مهم من ليزرات النانوتكنولوجي لتطبيقه واستخدامه في المجالات الطبية والصناعية اضافة لتطبيقه في مجال الاتصالات . تتضمن الرسالة الحالية دراسة الفوضى في الاتصالات عن طريق نمذجة معادلات المعدل ودراسة ديناميكية ليزر شبه الموصل النقطي الكمي . تعتمد ديناميكية ليزر شبه الموصل النقطي الكمي على عدة عوامل منهزامن التاخير الذي من خلاله تمكنا من دراسة طول التجويف الخارجي القصير والطويل بوجود التغذية العكسية وبالاعتماد على النتائج العملية. تم تحديد قيم طول التجويف الخارجي القصير والطويل حسب اهميتها في التطبيقات العملية ومنها الاتصالات عند تغير عامل تعزيز عرض الخط .اضافة الى تحديد الحالات المستقرة والدورية وشبه الدورية والحالات الفوضوية وامكانية حصول الفوضى شبه المستقرة .تمت دراسة منظومة اتصالات لليزرين من ليزرات اشباه الموصلات النقطية الكمية تتكون من ليزر شبه الموصل النقطي الكمي المرسل وليزر شبه الموصل النقطي الكمي المستقبل وامكانية التزامن بينهما ودراسة علاقة كثافة الفوتونات واحتمالية الملئ لحاملات الشحنة مع عدد حاملات الشحنة لكل من الليزرين , اضافة لدراسة تضمين خرج الليزر باشارة مضمنه ومحاولة فكها بعد استلامها من الليزر المستقبل . هذه الدراسة تمت بحل معادلات المعدل للنظام المستخدم بطريقة رنج - كتا للمرتبة الثانية المسماة (dde23) باستخدام برنامج MAThLAB .

استقصاء خصائص المفرق الهجيني Cd1 - xZnxS/Si للتطبيقات الفوتوفولتائية == Investigation of Cd1 - xZnxS/Si Heterojunction Properties for Photovoltaic Applications

Author name: رسل عبد الامير غازي مصحب
Supervisor name: ناهدة بخيت حسن
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Babylon
First pages:
Abstract: تم تحضير اغشيةCd1 - xZnxS باستخدام تقنية الرش الكيميائي الحراري وهي طريقة سهلة الاستخدام ومناسبة للترسيب على مساحات كبيرة . استخدمت خلات الكادميوم المائية كمصدر للحصول على الكادميوم وخلات الخارصين المائية كمصدر للحصول على الخارصين والثيوريا مصدر للحصول على الكبريتيد. تم تحضير مزيج الاغشية Cd1 - xZnxS بنسب حجمية مختلفة من (x) 0,0.2 ,0.4 ,0.6 ,0.8 ,1] [x= على قواعد زجاجية وسليكونية نظيفة ومسخنة عند درجة حرارة اساس 360) oC) وقد استخدم الهواء الجوي كغاز حامل . تم فحص التركيب البلوري للاغشية المحضرة بطريقة حيود الاشعة السينية ( XRD) واوضحت النتائج ان جميع الاغشية المحضرة كانت متعددة التبلور واظهرت تحسن البنية البلورية من حيث نقصان عدد القمم واختفاء بعضها وهذا مؤشر لتحسن خصائص الاغشية المحضرة. درست طبوغرافية الاسطح للاغشية المحضرة باستخدام مجهر القوى الذرية (AFM) والمجهر الالكتروني الماسح ) FESEM) ومبدد الطاقة للاشعة السينية (EDX) . الحجم الحبيبي للغشاء الرقيق Cd1 - xZnxS يزداد مع زيادة النسب الحجمية من (ZnS) . كذلك ان زيادة نسبة (ZnS) تؤدي الى زياده خشونة السطح، فحص (EDX) اظهر احتواء الاغشية على عناصر (Cd, Zn, S) كما هو متوقع ، مشيرا الى تشكيل اغشيه S Cd1 - x Znx عالية النقاوة. تم دراسة الخصائص البصرية للاغشية المحضرة بسمك (160 ± 3) nmباستخدام قياسات النفاذية البصرية في المنطقة الطيفي (300 - 1100) nm. نتائج النفاذية كانت اكبر من 94%. فجوة الطاقة المباشرة للــ (CdSpure) تساوي 2.61) eV) ، والتي تزداد مع زيادة النسب الحجمية من (ZnS) حيث ان فجوة الطاقة لل( (ZnSpureتساوي 3.41) eV) .الثوابت البصرية كمعامل الانكسار ومعامل الخمود وثوابت العزل تم حسابها لجميع الاغشية المحضرة. الخصائص الكهربائية مثل التوصيلية الكهربائية المستمرة وتاثير هول تم دراستها . اشارت النتائج ان الاغشية من النوع الموجب ( p - type ) وتمتلك طاقتي تنشيط ( Ea1,Ea2 )، وقد وجد ان التوصيلية الكهربائية المستمرة تقل مع زيادة نسب حجمية من (ZnS). قيست سعة الانحياز العكسي للمفرق الهجين Cd1 - x ZnxS /n - Si كدالة لفولتية الانحياز وبتردد (1) MHz ، وقد دلت هذه النتائج على ان المفرق من النوع الحاد، لوحظ نقصان السعة بزيادة جهد الانحياز العكسي كذلك تزداد السعة (334 - 577) pF مع زيادة النسب الحجمية من (ZnS) ، بينما يقل عرض منطقة النضوب مع زيادة النسب الحجمية من (ZnS) . ووجد ان جهد البناء الداخلي تقل قيمته من (0.7 - 0.27) Volt مع زيادة النسب الحجمية من (ZnS). بينت خواص تيار - فولتية للمفرق الهجين (CdS)1 - x (ZnS)x /n - Si بان تيار الظلام الامامي يتغير اسيا تقريبا مع فولتية الانحياز ويتفق المفرق المصنع مع نموذج اعادة الاتحاد - الانتفاق ويظهر الانحياز العكسي توقف طفيف ثم فولتية انهيار تدريجيا. كذلك يلاحظ تناقص عامل المثالية وتيار الاشباع مع زيادة النسب الحجمية من (ZnS). درست خواص تيار الدائرة القصير وفولتية الدائرة المفتوحة حيث وجدنا ان Jsc وVocتزداد قيمتهمزايادة النسب الحجمية من (ZnS) وقد فسر سبب ذلك بوجود تغير في التركيب للاغشية وكذلك تحسن طبقة التداخل بين p - (CdS)1 - x(ZnS)x وn - Si .درست الخصائص الطيفية للمفرق الهجين Cd1 - xZnxS /n - Si ووجدنا ان قيم الاستجابة الطيفية , الكشفية النوعية والكفاءة الكمية تقل وتزحف باتجاه الاطوال الموجية الطويلة مع زيادة نسب حجمية من (ZnS) ، بينما تزداد القدرة المكافئة للضوضاء مع زيادة النسب الحجمية من (ZnS). من خلال قياسات الخصائص التحسسية للاغشية الرقيقة لغاز ( NO2 ) اظهرت تحسسية جيدة عند حرارة تشغيل (100 - 200)oC ،ايضا تحسسيه الاغشية للغازات تقل بزياده تركيز ZnS عند oC (200) وان تغيير درجة حرارة التشغيل تؤدي الى تغيرات واضحة في تحسسية الاغشية. | Cd1 - xZnxS thin films were prepared by using a chemical spray pyrolysis technique, which is a simple, inexpensive and suitable technique for large deposition area.The cadmium acetate was used as a source of cadmium, the zinc acetate was used as a source of zinc and theoria was used as a source of sulfide. Mixed Cd1 - xZnxS thin films with different Vol.% of (x) (x= 0,0.2,0.4,0.6,0.8 and 1) has been prepared on clean glass and silicon substrate at 360 ºC with atmospheric air as the carrier gas. The crystal structures of the deposited films were examined by X - ray diffraction analysis. The results show that all the prepared films are polycrystalline structure,and it has shown improvement in the crystal structure in terms of decreasing the reflection peaks and disappearance of some peaks .This refers to the improvement in the properties of the films. The surface morphology of the deposits films has been studied by using atomic force microscope(AFM),Field emission scanning electron microscope (FESEM) and energy dispersive X - ray(EDX).The grain size of the Cd1 - xZnxS thin films increases with increasing of ZnS Vol.% , also the increasing ZnS Vol.% leads to increase in the surface roughness. (EDX) shows that all the films contain the elements (Cd, Zn and S) as expected, indicating formation of the Cd1 - xZnxS films with high purity films with good stoichiometry. The optical properties of the films, which were prepared with thickness of (160±3) nm,have been determined by using the optical transmittance measurements in the spectral region from (300 - 1100) nm. Transmittance results were upper than 94% and direct energy gap for (CdS pure) equal (2.61) eV, it increases with increasing ZnS of Vol.% where energy gap for (ZnS pure) equal (3.41)eV. The optical constants such as refractive index, extinction coefficient and dielectric constant have been calculated for all prepared films. The electrical properties include D.C conductivity and Hall effect were studied. The results show that the prepared films were p - type , and have two activation energies (Ea1 , Ea2).It is found that the electrical D.C conductivity decreases with the increase of the ZnS Vol.%. The reverse bias capacitance for p - Cd1 - xZnxS /n - Si heterojunction was measured as a function of bias voltage at frequency 1MHz, and we note that these heterojunction are abrupt. The capacitance decrease with increasing the reverse bias voltage, also it increases from (334 to 577) pF with increase of the ZnS Vol.%. while the depletion width decreases with increasing of the ZnS Vol.%. The value of built - in potential decreases from (0.7 to 0.27) Volt with increasing of the ZnS Vol.%. For p - Cd1 - xZnxS/n - Si heterojunction under dark conditions shows that forward bias current variation approximately exponentially with voltage bias.This conforms with tunneling - recombination model.The ideality factor and saturation current were calculated and notice the value decrease with increasing of the ZnS Vol.%. The short - circuit current density and open - circuit voltage have been studied, where the Jsc and Voc increases with increasing of the ZnS Vol.%. The spectral response of Cd1 - xZnxS/n - Si was studied. The values of responsivity, specific detectivity and quantum efficiency decreases and shifts to longer wavelength with increase of the ZnS Vol.%. While the noise equivalent power increases with increasing the ZnS Vol.%. From the sensing properties measurements of thin films show that films were good sensors for gas (NO2) at operation temperature (100 - 200) oC , also sensitivity of films for gases decreases with increases the concentration of ZnS at (200) oC. The variation of the operating temperature of the films have led to a significant change in the sensitivity of the sensor.

دراسة نظرية وعملية لمعالجة الصور الطبية باستخدام تقنية فورير == Theoretical and Experimental Study on Coherent Processing of Medical Image Using the Fourier Optical Technique

Author name: مروة كريم عبد
Supervisor name: رياض ناجي علي
General topic: Physics
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: في هذا البحث تم اعتماد نظرية الحيود وتحويلات فوريير (بصريات فوريير) في معالجة الصور عمليا (باستخدام نظرية بصريات فورير) كمعالج بصري , ونظريا (باستخدام برمجيات MATLAB ) . استخدمت في البداية اجسام قياسيه ذات اشكال هندسيه منتظمة ( المربع والدائرة) ذات دوال رياضيه بسيطة في النطاقين الحيزي spatial domain)) والترددي (frequency domain) وذلك لسهولة المقارنة بين نتائج المعالجتين العملية والنظرية. بعد ذلك تم استخدام عدد الصور, اغلبها طبيه كونها الغاية الاساسية للبحث, كاجسام في منظومة فوريير المختبرية لمعالجة المعطيات البصرية . كجزء من متطلبات معالجة الاشارة البصرية استخدمت ثلاثة انواع من مرشحات الاشارة البصرية لثلاثة انطقه حيزيه مختلفة (الترددات العالية, الواطئة, وحزمه تردديه متوسطة). بينت نتائج الدراسة افضليه وبساطه المعالجة النظرية , باستخدام برمجيات ماتلاب بالقياس الى استخدام منظومه فوريير المختبرية, وبالتالي امكانيه استخدام هذه البرمجيات, مع البرمجيات المستخدمة في تناول الصور في اجهزة التصوير الطبي المختلفة, لاغراض التشخيص الطبي المحوسب | In this thesis, the diffraction theory and the Fourier transforms technique (Fourier optics) are utilized to coherently process the optical data experimentally and theoretically, through implementing Matlab software. Two standard objects of regular geometry (rectangular, and circular aperture functions) are used as diffraction apertures. Then their Fourier transforms and inverse Fourier transforms are obtained experimentally (by using 2F - & 4F - set up optical processors), and then calculated theoretically using Matlab. Many complex objects are used, especially medical images (the targeted aim of this project), are implemented and processed using technique. Different special filters (low - pass, high - pass, and band - pass) are used to manifest the main processing features such as enhancement, smoothing and edge detection. The results of this project show the superiority and simplicity of the Matlab software in processing the complex images. This proves the capability of implementing Matlab software, together with the medical imaging system's handling software, in computerized medical identification and diagnosis

دراسة انتقال طاقة الفلورة داخل جزيئات الوسط الفعال الليزري == Study of fluorescence energy transfer in laser active medium molecules

Author name: نورة عزيز عليوي
Supervisor name: لازم حسن عبود
General topic: Physics
Degree: Master
Language: Arabic
University location: Babylon
First pages:
Abstract: في هذا البحث تم دراسة ظاهرة انتقال طاقة الفلورة بين الصبغات الليزرية والتي تتحقق هذه الظاهرة بتساوي طاقة طيف الامتصاص لاحدى الصبغتين مع طاقة طيف الانبعاث (الفلورة) للصبغة الثانية في الحالة المثالية لحصول الانتقال, وهنا تسمى الصبغة الاولى بالجزيئة القابلة والصبغة الثانية بالجزيئة المانحة.وقد تم تحضير انموذجين في هذا البحث,الاول للصبغة القابلة وهي (الاكردين اورنج Acridin orang) مع الصبغة المانحة وهي (البوب بوب Popop ) والانموذج الاخر كانت فيه الصبغة القابلة (الاكريفلافين Acriflavin) والمانحة هي (البوب بوب).وعند قياس طيفي الامتصاص والفلورة لكلا الانموذجين تحقق التداخل الكبير بينهما وهذا يؤكد تحقق حصول نموذج (القابل - المانح).وقبل البدا بالخلط تم دراسة اطياف الامتصاص والفلورة وكذلك الخواص البصرية الخطية لجميع الصبغات المستخدمة على انفراد وبتراكيز مختلفة , وهي (0.5x10 - 3,0.5x10 - 4,1x10 - 5, 1x10 - 6)ML, وبينت النتائج تغير الطول الموجي لجميع الصبغات مع تغير التركيز وحصول زحف نحو الازرق مع زيادته ونقصان كل من معاملي الامتصاص والانكسار في التراكيز الواطئة ,مع ملاحظة زيادة الكفاءة الكمية ونقصان العمر الزمني لمستوي طاقة الفلورة مع نقصان التركيز.وبعد تحضير انموذجي (القابل - المانح) لصبغتي (الاكردين اورنج + البوب بوب)و(الاكريفلافين +البوب) وبالتراكيز السابقة نفسها ,لاحظنزايادة شدة طيف الانبعاث (طيف الفلورة) حيث كانت اعلى قيمة ((46.48 عند التركيز ML(0.5x10 - 3) مقارنة مع قيمته (9.28) عند نفس التركيز للصبغة القابلة قبل الخلط للانموذج(الاكردين اورنج + البوب بوب)و كانت شدة طيف الانبعاث (الفلورة) عند اعلى قيمة (39.85) بالتركيز (0.5x10 - 3) Ml مقارنة مع قيمتها للصبغة القابلة قبل الخلط والتي كانت (9.15) لنفس التركيز.وقد حصلت ظاهرة الانتي ستوكس (anti - Stokes ) في انموذج (الاكردين + البوب بوب )مقارنة مع حصول ظاهرة ستوكس (Stokes ) قبل الخلط لكلا الصبغتين.اما في انموذج (الاكريفلافين + البوب بوب) فقد حصلت ظاهرة الستوكس (Stokes)وهذا مطابق مع حصول الظاهرة للصبغتين على انفراد.وبعد تحضير انموذجي الخلط لاحظنا تغير جميع الخواص البصرية الخطية (معاملي الامتصاص والانكسار الخطيين, زمن عمر مستوي الفلورة , النتاج الكمي ) عما كانت عليه قبل الخلط للصبغات على انفراد. | In this research was the study of the phenomenon of fluorescence energy transfer between some laser dyes. To get the energy transition process must equal absorption energy spectrum of the first dye (accepter molecule) with florescence energy spectrum for the second dye (donor molecule). Two models have been prepared in this study , the first of the accepter dye (acridine Orange ) with the donor dye (popop), and was second between the accepter dye (acriflavin) with the donor dye (popop) . When measuring the absorption spectrum and the fluorescence spectrum of accepter dyes and donor dye check is considerable overlap between them and this confirms the check model (accepter + donor ). Before starting mixing was studies absorption and fluorescence spectra as well as optical linear properties for all dyes used individually at different concentrations (0.5 x 10 - 3 ,0.5 x 10 - 4 ,1 x 10 - 5 ,1 x 10 - 6)Ml . The results showed change the wavelength of all dyes with change of dye solution concentration .Blue shift has happened with decreasing concentration and decreases both linear absorption and refraction coefficients with decreasing concentration. The study recorded a decrease in quantum yield and increase the lifetime of the energy level of fluorescence with an increased concentration. After preparation of samples (accepter + donor ) to (acridin Ornge and popop ) and concentration mentioned. we have noticed an increase intensity of emission spectrum (fluorescence spectrum), where the highest value (46.48) at the concentration (0.5 x 10 - 3) compared with the value (9.28) at the concentration before mixing. And got the same result after preparation of samples (accepter + donor ) to ( acriflavine and popop ) and concentration mentioned, we have noticed an increase intensity of emission spectrum ( fluorescence spectrum ), where the highest value ( 39.85 ) at the concentration (0.5 x 10 - 3 ) compared with the value (9.15 ) at the same concentration before mixing. It has got anti - Stokes phenomenon in the samples of (acridine Orange and popop ) compared to got stokes phenomenon for two dyes before mixing. In the samples of (acriflavin and popop), Stokes phenomenon has got , this is identical to the one who happened to two dyes before mixing.We note change all the linear optical properties (absorption coefficient , refraction coefficient, quantum yield, lifetime of the energy level of fluorescence) of all samples (accepter + donor) prepared compared to what it was before mixing

استخدام المطاط المعاد في تحضير عجنات مطاطية تستعمل كاغطية مانعة للرطوبة == USING RECLAIMED RUBBER FOR PREPARING RUBBER BATECHES APPLIED AS ANTIWETNESS COVERS

Author name: احمد محي حمود جواد عجام
Supervisor name: سمير حسن هادي النصراوي | محمد حمزة دحام المعموري
General topic: Physics
Specific topic: Physics
Degree: Master
Language: Arabic
University location: Babylon
First pages:
Abstract: تناولت هذه الدراسة تحضير عجنة مطاطية متراكبة لكي يتم استخدامها في تصنيع اغطية عازلة للرطوبة, وقد تم ٳجراء هذه الدراسة بعدة محاور. اولا تم اختيار مطاط الستايرين - بيوتادايين (SBR) كمادة اساسية واضيف ٳليها المطاط معاد الحيوية (Reclaim Rubber) بنسب مختلفة pphr (0, 50, 100, 150, 200, 250) بالاضافة الى المواد المفلكنة والمعجلة والمنشطة لعملية الفلكنة, وتم تحضير العينات باستعمال قوالب ذات ابعاد خاصة وحسب المواصفات العالمية للفحص (ASTM) وباستخدام المكبس الحراري تحت ضغط 10MPa ودرجة حرارة 145°C ثم تم دراسة بعض الخواص الميكانيكية للعينات مثل خاصية الشد, الاستطالة, معامل المرونة, مقاومة التمزق, الصلادة, التشوه بالانضغاط, الوزن النوعي, البلى الاحتكاك وخاصية امتصاصية الماء. من خلال اجراء الاختبارات وجد ان خواص قوة الشد والاستطالة ومقاومة التمزق والوزن النوعي وامتصاصية الماء, تزداد مع زيادة نسبة المطاط معاد الحيوية وينخفض كل من معامل المرونة والصلادة والبلى الاحتكاكي وبعد ذلك تم اختيار العجنات التي تمتلك افضل خواص ميكانيكية وهي العجنة B5 التي تتكون من pphr(100SBR+200R.R) والعجنة B6 التي تتكون من pphr(100SBR+250R.R). ثانيا تم ٳضافة الياف الصوف وهي عبارة عن مخلفات صناعية ونواتج عرضية للصناعات النسيجية الملوثة للبيئة وكذلك الياف النايلون وهي عبارة عن نفايات لمواد بلاستيكية ملوثة للبيئة وبنسب pphr (0, 10, 20, 30, 40, 50) الى العجنتين B5, B6 فاصبحت كل عجنة تمتلك ست عينات مدعمة بالياف الصوف وست عينات مدعمة بالياف النايلون وتم تحضير العينات ودراسة تاثير ٳضافة الالياف على الخواص الميكانيكية للعجنة المطاطية. بعد مقارنة النتائج مع المواصفات القياسية, تم اختيار العجنة التي تتكون من (100SBR+200R.R+30Nylon.F) pphr حيث تمتلك استطالة (463%) ومقاومة تمزق (2.863MPa) وامتصاصية الماء (0.67%) بالرغم من قوة الشد لها (2.982MPa). ان اضافة الالياف بنوعيها الى العجنة المطاطية سببت انخفاض في قوة الشد من (3.846MPa) الى (2.982MPa) والاستطالة من (599%) الى (463%) وارتفاع في مقاومة التمزق من (1.45MPa) الى (2.86MPa) ومعامل المرونة من (0.067MPa) الى (0.075MPa) والصلادة من (46.83) الى (74.66) ومقاومة البلى الاحتكاكي من (0.046%) الى (0.528%) وانخفاض التشوه بالانضغاط من (9.09%) الى (4.77%) والوزن النوعي من (1.06g/cm3) الى (0.9g/cm3) وهذه النتائج تتلاءم مع المواصفات المطلوبة للمنتج, ولتحسين خاصية الشد تم اخذ 150g من العجنة التي تم اختيارها واضيف لها 50g من مادة اسود الكاربون وبعد اجراء فحص الخواص للعينة الناتجة تم الحصول على قوة شد بمقدار (5.16MPa) بالاضافة الى زيادة التحسن في الخواص الميكانيكية الاخرى. لمعرفة مدى التاثير الذي تحدثه الاشعة فوق البنفسجية (UV) على خواص المنتج تم تعريض عينات الاختبار الى الاشعة فوق البنفسجية UV ولفترات زمنية مختلفة (0, 15, 30, 45, 60) hour وللخواص التالية : مقاومة الشد والاستطالة ومقاومة التمزق والصلادة والوزن النوعي وامتصاصية الماء. فاظهرت النتائج حدوث انخفاض في مقاومة الشد بنسبة 6.39% والاستطالة بنسبة 7.81% ومقاومة التمزق بنسبة 10.78% والوزن النوعي بنسبة 1.53% وزيادة في قيمة الصلادة بنسبة 2.48% وامتصاصية الماء بنسبة 56.49% وهذه التغيرات تكون ضمن حدود المواصفات القياسية المعتمد عليها. تم اجراء اختبار التعجيل بالتعتيق الحراري لعينات الشد ومقاومة التمزق وامتصاصية الماء تحت درجة حرارة 70°C ولمدة 28 يوما فاظهرت النتائج حدوث زيادة طفيفة في قيمة مقاومة الشد (5.417MPa) ومقاومة التمزق (3.2Mpa) وامتصاصية الماء (0.793%) وانخفاض طفيف في قيمة الاستطالة (302%). | This study comprise the preparation of composite rubber batch to be used in the manufacture of insulation covers moisture and has been nominated by conducting this study with several axes. First was selected basic feed stock styrene - butadiene rubber (SBR) in addition to the Reclaim rubber and at different rates (0, 50, 100, 150, 200, 250) pphr in addition to the vulcanizing material and accelerators and activators to vulcanization process. The samples prepared by using the private dimensions of molds and according to international standards for testing (ASTM) and using a thermal piston under the compression 10MPa and temperature 145°C then some mechanical properties was studied for samples such as tensile properties, elongation, modulus of elasticity, tear resistance, hardness, deformation Compression, specific gravity, friction and property absorbency water. Through testing it found that The increasing of additives ratios of reclaim rubber due to increase the tensile strength and elongation and tear resistance and specific weight and absorbency of water, and decreases both the elastic modulus and hardness and friction. After that was chosen the samples which owns the best mechanical properties of a B5 sample consisting of (100SBR+200R.R) and B6 sample, which consists of (100SBR+250R.R). Second it has been added wool fabrics which is a waste, and outputs cross textile industries and nylon fabrics which is a waste plastics, at different rates (0,10,20,30,40,50) pphr to samples B5, B6, becoming a whole batch has six samples reinforced wool fibers and six samples reinforced nylon fibers was prepared samples and study the effect of adding fiber on the mechanical properties of rubber batch. After comparing the results with standard specifications, has been chosen the sample which consisting of (100SBR + 200R.R + 30Nylon.F), It has a tensile strength elongation (463%) and resistance to tearing (2.863MPa) and water absorbency (0.07%), exception the tensile strength (2.982MPa). The addition of fiber to both types of batchs rubber caused a decrease in the tensile strength of (3.846MPa) to (2.982MPa) and elongation of (599%) to (463%) and increase in the tear resistance of (1.45MPa) to (2.86MPa) and elastic modulus of (0.067Mpa) to (0.075MPa) and the hardness of (46.83) to (74.66) and wear resistance of (0.046%) to (0.528%) and low deformation by compression of (9.09%) to (4.77%) and spesific gravity of (1.06g/cm3) to (0.9g/cm3), and these results fit with the required product specifications, and to improve the tensile properties were taken 150g of selected sample and add them 50g of carbon black material and after an examination of properties of the sample resulting been get the tensile strength by (5.16MPa) in addition to the increased improvement in other properties. To find out the extent of the impact of ultraviolet radiation (UV) on the properties of the product have been exposing the test samples to UV radiation and for different periods of time (0,15,30 ,45,60) for properties : the tensile strength, elongation, tear resistance, hardness, specific weight and absorbency of water. The results indicate a reduction in tensile strength 6.39% and the elongation of 7.81% and tear resistance of 10.78% and specific weight of 1.53% and increase in the value of hardness at 0.024% and absorbency of water of 4.8%, and these changes are within the limits of the standard specifications. Was conducted testing of heat aging to tensile strength and tear resistance and absorbency of water samples under a temperature of 70°C for a period of 28 days, The results indicate to increase in tensile value by (0.04%) and tear resistance by (0.04%) and decreasing in elongation value of (0.01%).

التراكيب الالكتروني بعض المعقدات المعدنية المختارة

Author name: فائق عبد الله محمد التميمي
Supervisor name: حامد ابراهيم عبود محمد التميمي
General topic: Physics
Specific topic: Electronics Physics
Degree: Doctorate
Language: English
University location: Babylon
First pages:
Abstract: The aim of the present work entitled " Electronic Structure of SomeSelected Metal Complexes " is to present a theoretical study based on thehybrid function of three parameters Lee - Yang - Parr B3LYP of the densityfunctional theory DFT quantum mechanical approach together with theStuttgart Dresden triple zeta SDD basis sets. All calculations are carried outby employing the used method at the Gaussian 09 package of programs.The studied metal complexes are twenty four divided into three groups : Platinum metal complexes, Vanadium metal complexes and Aluminummetal complexes. The electronic structure of the complexes includes thestructural, electronic, spectroscopic and excitation states properties.The results show that the SDD basis sets are efficient stronglysuggested for heavy metals and give good relax for the structures of thestudied metal complexes, where the geometrical parameters for cis - platinare in a good agreement with experimental results. Cis - platin has a largeabsolute value of chemical potential with low value of electrophilic index.Cis - platin has high ability to chemically interact with big molecules and ittakes place either in a clinical use or under clinical trials. Some platinummetal complexes and compounds have high symmetric distribution ofelectron density and electrostatic potential and others make variousbehaviors for electron transfer. Platinum metal complex isomers have thesame behavior of platinum centered compounds such as carboplatine andoxaliplatin used as drugs in clinical uses, where the ammine or bidentateammine ligands and either chlorides or carboxylate are leaving groups.The platinum metal complexes have high ability to interact with largemolecules due to their symmetric in the space and to participate either inclinical use or under clinical trials as agents. All platinum metal complexcompounds have electrophilic index greater than that for cis - platin and theyIIare soft compounds, they can easily interact with big soft molecules suchas enzymes or DeoxyriboNucleic Acid DNA.The results state that the vanadium metal complexes have low LUMOHOMOenergy gap and they are more biological activity. Moreover, theoxygen and chlorine atoms in vanadium metal complexes have an ability tointeract with the receptor reactive sites. The results of quantum chemicalparameters indicate that the vanadium metal complexes are soft and caneasily interact with enzymes. The results of nuclear magnetic resonancecalculations illustrate the central vanadium metal ion in all complexes thathave the lowest value of magnetic shielding and chlorine atoms whosemagnetic shielding values depend on the coordination for each complex.The molecular polarizability calculations showed that the vanadium metalcomplexes have chemical activity and high ability to interact with speciesespecially the enzymes in which they are soft big molecules. For aluminum metal complexes, the results reinforce that they have various electronic applications with different LUMO - HOMO energy gaps.The differences of the HOMOs and LUMOs energies distribution make the aluminum metal complexes to have chemical reactivity as Ziegler - Natta catalysts in the chemical applications such as polymerization processes.The results also prove that the electron density distribution is made from the aluminum metal complexes to have low electrophilic index in which they play a significant role as catalysts in many chemical reactions especially the polymerization processes.

المعالجة شبه الكلاسيكية والكمية لتفاعلات الاندماج والتفكك لبعض النوى الخفيفة والمتوسطة == Semiclassical and Quantum Treatment of Fusion and Breakup Reactions of some light and Medium Nuclei

Author name: مالك صالح محيميد الحمداني
Supervisor name: خالد حسين هاتف العطية | فؤاد عطية مجيد
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Babylon
First pages:
Abstract: في هذه الدراسة ، اجريت حسابات مقطع الاندماج الكلي σ_fus وتوزيع حاجز الاندماج D_fus واحتمالية الاندماج P_fus للانظمة 4He+233U، 6He + 64Zn ، He+209Bi6، 7Li+59Co،B+237Np11، C+48Ti13، 14N+59Co، N+54Fe15، 16O+46Ti، 18O+58Ni، 18O+60Ni، O+64Ni18، O+208Pb18، F+40Ca19، 27Al+45Sc، 30Si+64Ni، 37Cl+25Mg، 46Ti + 46Ti، Ti+60Ni50، 58Ni + 28Si، 58Ni + 54Fe، 58Ni+60Ni، 60Ni+100Mo . اجريت الحسابات باستخدام مقاربتين : اولا، المقاربة الشبه الكلاسيكية والتي تعتمد بالاساس على نظرية Alder وWinther والتي استعملت لتعالج التهيجات الكولومية للنويات والتي تسمى بطريقة اقتران القنوات للاستمرار المقطع (CDCC). الحسابات تم انجازها في حالة غياب وتضمين تاثيرات الاقتران. ان المقاربة شبه الكلاسيكية تستعمل تقريبWenzel وKramers وBrillouin (WKB) لمعالجة احتمالية الاندماج الكلاسيكية بينما الحركة الذاتية تمت معالجتها عن طريق معادلة شرودنكر المعتمدة على الزمن. ثانيا، المقاربة للميكانيك الكمي حيث تعاملنا مع المسالة مستخدمين حسابات الميكانيك الكمي الشاملة والتي انجزت الحسابات في حالة عدم تضمين تاثيرات الاقتران وكذلك مع الاخذ بنظر الاعتبار تاثيرات الاقتران.انجزت الحسابات باستعمال البرامج الحاسوبية SCF للحسابات الشبه كلاسيكية وQMCC لحسابات الميكانيك الكمي. البرنامج الحاسوبي SCF والذي كتب بالاصل من قبل H. D. Marta ومجموعته البحثية باستعمال لغة الفورتران ، بينما البرنامج الحاسوبي QMCC والذي كتب بالاصل من قبل L. F. Canto ومجموعته البحثية باستعمال لغة الفورتران. قمنا بتعديل هذه البرامجيات الحاسوبية لتاخذ بنظر الاعتبار الحركة النسبية بين الهدف والقذيفة. طريقة مربع كاي (chi - square) استعملت لايجاد مدى تقارب حساباتنا النظرية بالمقارنة من البيانات العملية الى جانب ذلك قمنا باضافة توزيع حاجز الاندماج ليحسب مباشرة من هذه البرامج. لقد كتب برنامج فرعي بلغة فورتران 90 لحساب توزيع حاجز الاندماج D_fus باستعمال طريقة الفرق بين ثلاث نقاط وهذا البرنامج الفرعي تم ربطة مع البرنامج الحاسوبي QMCCلكن في برنامج SCF اخذنا المشتقة الثانية لـ (Eσ_fus) حيث σ_fus هي بصيغة وونك.لقد قورنت حسابات مقطع الاندماج الكلي σ_fus وتوزيع حاجز الاندماج D_fus واحتمالية الاندماج P_fus باستعمال طريقة مربع كاي (chi - square) لكلا التقاربين الشبه الكلاسيكي والميكانيك الكمي الشامل وبكلتا الحالتين بغياب الاقتران وبوجود الاقتران مع البيانات العملية. قورنت الحسابات شبه كلاسيكية وحسابات الميكانيك الكمي الشاملة لمقطع الاندماج الكلي σ_fus وتوزيع حاجز الاندماج D_fus واحتمالية الاندماج P_fus مع البيانات العملية المتوفرة لكل نظام، وجد ان حسابات قنوات الاقتران للميكانيك الكمي في توافق اكثر مع البيانات العملية من الحسابات شبه الكلاسيكية لاغلب الانظمة قيد الدراسة. | In this study, the calculations of the total fusion cross section σ f us, the fusion barrier distribution Df us and the fusion probability Pf us, for the reactions4He+233U, 6He+64Zn, 6He+209Bi, 7Li+59Co, 11B+237Np, 13C+48Ti, 14N+59Co,15N+54Fe, 16O+46Ti, 18O+58Ni, 18O+60Ni, 18O+64Ni, 18O+208Pb, 19F+40Ca,27Al+45Sc, 30Si+64Ni, 37Cl+25Mg, 46Ti+46Ti, 50Ti+60Ni, 58Ni+28Si,58Ni+54Fe, 58Ni+60Ni, 60Ni+100Mo have been conducted. The calculations have been performed by using two approaches : Firstly, the semiclassical approach which based on Alder and Winther (AW) theory originally used to treat the Coulomb excitation of nuclei which is called Continuum - Discretized Coupled Channels (CDCC) method. The calculations have been preformed in the absence of coupling effects and in the case of the coupling effects were included. The semiclassical calculations used Wentzel, Kramers and Brillouin (WKB) approximation to treat the classical probability while the intrinsic dynamics is handled by the time - dependent Schrodinger equation.Secondly, the quantum mechanical approach, in which we treat the problem using the full quantum mechanical calculations. The calculations were performed in the case of no coupling included and with the coupling effects were taken into consideration.The calculations have been performed by using SCF code for semiclassical and QMCC code for quantum mechanical calculations. The SCF code is originally written by H. D. Marta and his collaborators using fortran language, while the QMCC code is originally written by L. F. Canto and his collaborators using fortran language. A sub - program has been written by Fortran 90 language to calculate the fusion barrier distribution Df us using the three - point - differencemethod. This sub - program has been implemented in both SCF and QMCCcodes.The calculations of the total fusion cross section σ f us, the fusion barrier distribution Df us and the fusion probability Pf us, have been compared by means of chi - square method for both semiclassical and quantum mechanical approaches in both no - coupling and coupling case with the corresponding experimental data. It is found that the quantum mechanical coupled channels calculations are in more agreement with the experimental data than the semiclassical calculations for most studied systems
1 ... 187 188 189 190 191 ... 370