Show: 25 50 75 100 Results

Search results: 25 out of 13,231

تحضير البوليمر الموصل بولي (ارثوا - تولدين) ودراسة الخصائص البصرية والكهربائية له واستخدامه في تصنيع الخلايا الشمسية == PREPARATION OF CONDUCTING POLY (O - TOLUIDINE) AND STUDY OF ITS ELECTRICAL AND OPTICAL PROPERTIES FOR APPLICATION AS A SOLAR CELLS

Author name: حسين فالح حسين اللعيبي
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: Arabic
University location: Basrah
First pages:
Abstract: The present study include the preparation of poly (O - Toluidine), by the chemical polymerization, then doped with HCl, and P - toluene sulphonic acid.The polymer solution deposited on glass, interdigitated finger electrode, and silicon wafer by the use of spin coating technique, in order to study electrical and optical properties as well as electronic applications in the fabrication of solar cells. The prepared samples were treated thermally before the measurement took place. Addition, a study was made of the effect of dyes on solar cells, (RhB, Flu, CuPc, and PbPc ) deposited on poly(O - Toluidine) and doped by p - toluene sulphonic acid (POT - PTSA). The thickness of the samples is measured by the use of Ellipsometry spectroscopy. The polymer thin films prepared were analysized by the use of (FT - IR) and Raman spectroscopes to determine the functional groups of the chemical bonds. To identify the nature, the structure of the surfaces of the prepared samples and to measured the partial size of the grain Atomic force Microscopy AFM insistent were used. The optical properties of the thin films prepared were studied including recording the absorption spectroscopy for wavelengths of (300 - 900 nm). The absorption coefficient and the forbidden energy gap to transmission directly were measured as well as the refraction index (n), extinction coefficient (k), dielectric constant ε, as well as, the optical constant represented by single oscillator energy (Eo), dispersion energy (Ed), moment of dielectric constant (M - 1, M - 1 3), non linear optical susceptibility (χ3) were determined.The electric conductivity was studied and it was found that the thin films correlate with the ohmic behaviour at the measured volts range (1 - 100V) for the polymers (POT, POT - HCl, POT - PTSA, and POMA). The effect of the temperature on the electric properties of these thin films is also studied. The study shows that the electric conductivity increases with the increase of temperature, where all the samples were found to show a negative thermal coefficient of resistance which is a characteristics of semi - conductive material.The effect of doping with HCl and p - toluene solphonic acid on electric conductivity was studied and found to increase to (2.46x10 - 5 S.cm - 1) while the conductivity of the polymer doping with HCl increases to (7.59x10 - 6 S.cm - 1) compared to the pure polymer (1.49x10 - 7 S.cm - 1). This study shows that the activation energy in the pure polymer is (0.313eV) and decreases when the polymer was doped with PTSA, HCl to (0.211 eV) and (0.235 eV) respectively.For the electronic application of prepared polymers (POT, POT - HCl, POT - PTSA, and POMA) a solar cells were constricted by using n - type silicon wafers and different electrode from gold and aluminium. The optical properties of the solar cell under the effect of the light equivalent to that of the sun and which falls vertically on the sample were studied ; it is practically found that, the highest efficiency obtained is (2.55 %) for the polymer (POTPTSA). The effect of thickness on the solar cell efficiency is also studied where it is found that the highest efficiency is about (2.55%) at thickness (35 nm). The electric properties of the solar cell were studied at different intensity (10,25, 50, 100) mW/cm2 and the efficiency reaches its maximum (4.88) when the intensity of the incident light is equal to 10 mW/cm2. It is observed practically that the efficiency of all cells decreases when dyes are added to the polymer (POT - PTSA). The exposure of the solar cell of the polymer (POTPTSA) to normal weather conditions was tudied for more than two monthswhere it is observed that the cell efficiency falls from 2.55 to 1.18 after two weeks of exposure. Then it reached constant value of 0.88 for two months of time exposure

تحديد النشاط الاشعاعي للنظائر المشعة 137Cs,134Cs,I131,40Kفي الاغذية المستهلكة في مدينة البصرة جنوب العراق == Radiation activity determination of 137Cs,134Cs,I131,40K and in food consumed in Basrah South of Iraq

Author name: مروة جواد كاظم راضي
Supervisor name: عبد المنعم خليل الكامل | علي عبد عباس الربيعة
General topic: Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: SAM 940TM detector has been used to detect and identify the radioactive isotopes (Radio - Isotope Identification (RIID)) at low levels of gamma rays emitted from food materials.Six samples of fresh milk have been pick out for six locations in Basrah. Ten samples of imported milk powder have been taken into account. Ten samples of lentils, rice, coffee and tea have been taken into account.Eight samples of mineral water, one of distilled water and one sample of piped water; the last one has been picked out from the net distributed water at physics department building in college of science university of Basrah.The results of our study show that, the annual effective dose for the radioactive potassium ????40 in food materials of the highest value. For local fresh milk is (0.216,0.529)mSv/y for adults and children respectively. It is of these samples have been taken from Zubair city, and its less value is (0.076,0.186)mSv/y for adults and children respectively. These samples have been taken from Abuo Al Kasseb. As for the imported milk powder, the highest value is (0.556,1.349) mSv/y for adults and children respectively. The sample is related to Al - munash milk from New Zealand, and less value is (0.272,0.660)mSv/y for adults and children respectively. The sample is related to modhash imported milk powder from Oman.For rice, the highest value is (0.303,0.636) mSv/y for adults and children respectively. The sample is related to Mahmood rice from India, and less value is (0.149, 0.313) mSv/y for adults and children respectively. That is for Galaxy rice imported from India.As for lentils, the highest value is (0.029 ,0.061) mSv/y for adults and children respectively. The sample is related to Wade al akdar lentils from Syria, and its less value is (0.020,0.042)mSv/y for adults and children respectively for Urbak lentils imported from Tukey. For water, the highest value is (0.189, 0.398) mSv/y for adults and children respectively for distilled water and Janaan drinking water from Baghdad. Its less valueis (0.183, 0.385)mSv/y for adults and children respectively for Aquafina drinking water imported from Kuwait.For coffee, the highest value is (0.041) mSv/y for adults for two samples from Brazil and one sample from Spain and other produce from Poland. Its less value is (0.019)mSv/y from European Union production. For tea, the highest value is (0.019, 0.039) mSv/y for adults and children respectively for Jant almunaash and Gazalian samples tea, its less value is (0.008,0.015)mSv/y for adults and children respectively for Alwaza, Mahmood and Baiet alteb samples tea imported from Sri Lanka.The annual effective dose of Iodine ????131 , Cesium ????????134 and Cesium ????????137 in lentils, rice, coffee, tea, mineral water, distilled water and piped water have been carried out and the results are listed in thesis.

تقييم اداء تصاميم جديدة لسخان الماء الشمسي في مدينة البصرة30.5°N == Evaluation of new designs of solar water heater in Basrah city 30.5° N

Author name: كوثر كاظم منخي
Supervisor name: نوري حسين نور الهاشمي | جاسم مهدي الاسدي
General topic: Physics
Specific topic: Solar Energy Physics
Degree: Doctorate
Language: Arabic
University location: Basrah
First pages:
Abstract: The main goal of the current study is the benefit of solar energy as the origin of any renewable energy for producing a hot water through multiple solar collectors each one with overall capacity about 26 liter so that, these collectors arranged in sequential order within the construction of the house without affecting the artistic aspects of the house. These collectors will capable of providing the house the needs of hot water for domestics use especially during the winter season. It will reduce the amount of energy such as electricity and or kerosene or any other source of energy that usually used in Basrah.The present study is included the design and manufacture of seven models of solar collectors. The tools that have used into manufactured of these collectors are some cheap materials that are available in Basrah markets. These models are differ from each other by some aspects with additions properties. The thermal performance and efficiency have a test and then choose the best one in order to use it in four different modern designs of solar heaters.the thermal performance of the manufactured heaters models are tested by calculate the amount of hot water supply under difference weathers conditions in the city of Basrah, which sorts as a large abundance of solar radiation. It also test two types of arrangement of difference parts of heaters. The practical test has been proven the advantage of linking hot water reservoir tank with cold water and then linking the whole system with the hot water tank. This arrangement will allow of gradual warming of the water, which allows the consumer get the hot water directly from the system and not from the reservoir. This study include what is called a feedback arrangement system in order to increase the benefit from solar radiation. In this case, the hot water will recycle to allow for moreexposure to solar radiation repeatedly, that in the case of non - use or the case of little use.All the experiment Steps carried out on the roof of the department of physics building's in the college of education for pure Sciences, Basrah university in the northern city of Basrah, located at latitude 30.50 N and longitude 47.80 E during the winter season 2013 - 2014. Al thought this winter characterized by abundant of rain and clouds the models No.5 shows very good results interm of high temperature of hot water and the amount of it. The temperature was reach (900 C). In addition the model No.4 which depend on the technique of feedback idea shows a good result interm of the amount of hot water produce which reach (146 liter) at a temperature about (500 C) with in only five hours starting at 10 : 00 am until the 2 : 00 pm.In order to develop the optimum dimensional measurements of the solar collectors a mathematical model was developed to predict the output temperature of hot water from the solar collectors or from the radiator in general for different dimensions. This model is working successfully and achieved data that in comparable with our experimental ones. The experimental results have been analyzed theoretically to compare the performance of all solar collectors of the heaters, in different weather conditions and in a same time.

درجة الحرارة المميزة وطاقة الاثارة الدنيا لليزر النقطة الكمية الشبه الموصل == Characteristic Temperature and Lowest Excitation Energy of Semiconductor QD laser

Author name: غيث منور علي
Supervisor name: رائد محمد حسن
General topic: Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: In this work, we have studied important theoretical relationships in Semiconductor Quantum Dot Laser (QDL) Characteristics.The study is based on theoretical model equations that are derived from the rate equations. The equations were applied on experimental parameters of continuous - wave QDL GaInP/InP at 1.55μm wavelength to get theoretical simulation of the characteristics of this laser type.We also studied the temperature effect on the internal losses and the impact of these losses in determining the characteristics of the temperature of QD. The results were presented within two cases; the first is when there are no internal absorption losses and the second where there is no existence of these losses. Also, we studied the effect of ambient temperature on the characteristics of temperature for each of QD and OCL.The lowest excitation energy of QD has been studied in two control cases : with surface density of QD and with cross - section of internal losses.Throughout changing many systems and control parameters, the effects of these parameters have been studied according to the different kinds of relationships. In this research, we have studied the parameters : Surface density of QD, mean size of QD, optical confinement layer, radiative constant for OCL material, spontaneous radiative recombination time, root mean square of QD size fluctuations, cavity length and mirrors reflectivity.Some of the results in this work were compared with other experimental results of other researchers who applied the QDL model and showed a good matching.

التقنين الاشعاعي البيئي للمياه الجوفية في غرب محافظة البصرة باستخدام تقنية التالق الحراري == Environmental Radiation Dosimetry of Groundwater in West of Basra Governorate using Thermoluminescence Technique

Author name: سيف قاسم هلال
Supervisor name: رياض جاسب ابو الهيل
General topic: Physics
Specific topic: Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: This study includes calculation the dose rate of emitted gamma - rays from groundwater taken from different locations in the Basra govemorate by use of thermoluminescence technique . it emphasis on the the characteristics of TL - reader ,TL - dosimeter (calcium fluoride) to know the suitability of these systems for environmental monitoring. It is found that the zero dose reading for calcium fluoride is 0.18 m rad .It is also found that most dosimeters of the same materials have nearly equal sensitivities and that all thebatches have high uniformity which makes them capable for environmental use. Experimental observations have indicated that there is linear relation between response and dose for the material which qualifies it for measuring doses within the low dose range. The variations in the response of the TL - reader using internal light source have also been investigated ,it is found that TL - reader has high stability .The fading in a environmental field for calcium fluoride is 7% in one month.Making sure that these systems are suitable for environmental monitoring programing ,calcium fluoride has been used for measuring gamma - rays emitting from natural background radiation ,it is foundthat the natural dose rate of gamma - rays emitted from the locations : Albrjisiya, khor aizubair, Safwan, Jabal Sanam, Um Qasr, Um Eanij and Al - lahees are (5.80,6.41, 5.32, 5.25,5.26,4.60 and 4.86) μrad/h receptivity . Thus, the dose rate of radiation emitted From ground water of province of Basra is 5.35 μ rad/h . the results proved that the inhabited area ling within the environmental monitoring satiations are the area in which the radiation is natural and that the rate that the human being exposed equal 11.5μrad/h which considered naturalexposure limit.

تحضير وتشخيص بعض البلورات السائلة وخلائطها الثنائية البلورية السائلة ودراسة بعض خواصها الفيزيائية == Preparation & Characterization of some liquid crystals and Binary liquid crystalline mixtures and study some of their physical properties

Author name: زينب نديم مطشر
Supervisor name: اياد جاسم الحجاج
General topic: Physics
Specific topic: Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: study included as a first step the preparation of compound 4 - heptyloxy benzaldehyde and derivatives by linking alkoxy series with the aldehyde, and in the second step was to prepare Schiff base compounds through interaction of equal moles of the compound 4 - heptyloxy benzaldehyde with some primary amines with different polar groups, and in the third stage was to prepare mixtures from the Schiff base compounds resulting from the second step,and we obtained five liquid crystalline mixtures at low temperatures and some of them close to room temperature, and then the chemical structures was chacterized and the absorption bands for functional groups was given by FTIR spectroscopy scan . A microscope with polarized light (POM) and a differential scaning calorimeter (DSC) was also used to study the liquid crystalline phases for individual compounds, as well as binary liquid crystalline mixtures and then a discussion of changes taking place at phase transition temperatures for individual liquid crystalline compounds as well as their binary mixtures , as characterized by these mixtures it owns a wide range of temperatures and some are close to room temperature ranging between (22.1 - 53.1 ℃). we has been studying some of the physical properties of these mixtures and compare them with the pure liquid crystals to see what has been achieved to improve these properties by studying the electrical properties (conductivity and dielectric ), as well as the activation energy , we has also been studying the photoelectric effect and determine the threshold voltage in the cases of parallel and vertical alignments , and the study shown a variation in the dielectric behaviour of binary liquid crystalline mixtures of remarkable increase compared to individual liquid crystalline compounds either the positive or negative dielectricanisotropy , ranging from ( - 1.320 - 2.234), while the variation in the electrical conductivity of binary mixtures of liquid crystal range (0.138 - 0.351 (ohm.m) - 1, and finally studied photoelectric effects for individual liquid crystalline compounds, as well as binary liquid crystal mixtures show that liquid crystalline mixtures have seen a clear decline in the threshold voltages (1.3 - 3.9Volt

دراسة نظرية لانتشار نبضة كاوسية في الياف البلورة الفوتونية والعوامل المؤثرة فيها == Theoretical Study of the Propagation Gaussain Pulse in Photonic Crystal Fibers and the Parameters Influencing it

Author name: دعاء حسين هاشم
Supervisor name: حسن عبد الله سلطان
General topic: Physics
Specific topic: Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: In this thesis the propagation of short Gaussian pulse in Photonic Crystal Fibers (PCFs) are studied, the effect of the fiber parameters on the pulse like the absorption, dispersion and nonlinearity studied also.Nonlinear Schrodinger Equation (NLSE) was solved numerically using the spectral or Split - Step Fourier Method (SSFM) to determine the pulse spatio - temporal evolution.The study includes the effect of the photonic crystal arrangement especially the holes number, hole - hole spacing and holes dimeter on the effective refractive index and the dispersion of the photonic crystal fiber.The Nonlinear Schrodinger Equation (NLSE) was solved using the Finite differences in the frequency domain (FDFD) method.The two zeros dispersion were studied to calculate the zero dispersion wavelength (ZDW) by applying the international golden ratio (1.16180339887) for the ratio of the hole - hole spacing to the holes dimeters.The study shows that the pulse propagation depends strongly on the absorption, dispersion and nonlinearity of the PCF, and the pulse wavelength must be near the ZDW to ensure the propagation with little loses.The dependence of the nonlinear refractive index, the dispersion and the ZDW of the PCF were proved.The study shows that the golden ratio can be used to have two ZDWs, and a new ratio of hole - hole spacing to the hole dimeter equal to 2 can be used to achieve two ZDWs.

حساب كثافة الحاملات في طبقة الحصر البصري واشغال الحاملات المحصورة في منظومة ليزر النقطة الكمية نوع GaInAsP/InP == Calculating the Carrier Density in OCL and Confined Carrier Occupation in Quantum Dot Laser System Type GaInAsP/InP

Author name: ایمان ذیاب شرشاب
Supervisor name: رائد محمد حسن
General topic: Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: In this work, we have studied many control parameters effect which plays an important role to determine the density concentration of carriers in the Quantum Dot Laser (QDL) system. Our study is based on theoretical model equations which derived from the rate equations. The equations were applied to the GaInAsP/InP QDL with wavelength 1.55μm. We produce a theoretical simulation and analytical solution of the equations by a Mathematical program.Theoretical equations are used to study the effect the parameters by controlling the value of each : the carrier's density and occupancy of the Level of a carrier confined in a QD. There are two cases : when the cross - section of the internal absorption losses has a influential amount and a nather it case when approaching zero border. As well as, we study the impact of the parameters on the threshold current density and its compounds. In addition, we study the role of these parameter to determining the maximum temperature of QDL operation through effect on temperature rang of the system.The temperature effects on the carriers’ activities in the system are studied, whereas the characteristics temperature of QDL has been studied in the two cases : with / without internal losses.The effects of structure and control parameters are applied to Study many factors. Such as : surface density of QD, mean size of QDs, optical confinement layer, spontaneous radioactive recombination time and resonator losses.

دراسة تاثير جهود المصيدة على سلوك الدالة الموجية في تكثيف بوز اينشتاين == Study influence of the trapping potentials on the behavior of the wave function in Bose - Einstein condensation

Author name: وليد حميد عبد المالكي
Supervisor name: خالد محمد جياد الموسوي | خالد محمد جياد الموسوي
General topic: Physics
Specific topic: Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: This dissertation have been studied and analyzed the wave function behavior under trapping potentials that are usually used in experiments which led to formed Bose - Einstein condensation in ultra cold gases. The wave function behavior is dealt with under the effect of three types of potentials : the Harmonic oscillator, the double well, and the Optical Lattice. These are used individually, overlapped together, and when two different kinds are shed on each other in an orthogonal form. Besides, factors and variables that have major or minor roles in potentials the distribution that determine the wave function behavior is discuss in this dissertation.And study parameter ???????? range of effect on the nature of the Harmonic oscillator trapping potential and the Wave Function distribution, this factor effect is studied under the effect of the Harmonic oscillator Trap. As well as, studying this parameter effect on the Wave function behavior under the effect of other three types of potential traps used in Bose - Einstein condensation which are : the Optical Lattice potential overlapped with the Harmonic oscillator potential, the Optical lattice potential orthogonally shed on the harmonic oscillator potential. Also, studied the wave function behavior under the effect of the double well potential when the range of distribution centre is ∓0.5 and when the distribution centre increases to ∓2.And also discussed the effect of the nonlinear G on the wave function behavior under the effect of the Harmonic potential in terms of value and distribution. Through studying under the effect of the Harmonic potential, it have noticed that there is a linear relation between the energy and the chemical voltage at the centre of the trap as well asbetween the wave function and Energy. Yet, the linear relation is not exist between Energy and the frequency rate ???????? as well as between the wave function and the chemical potential. While there is a nonlinear relation exist under the effect of the optical lattice potential overlapped with the Harmonic potential at the centre of trap as well as the relation is exist between the wave function and the energy at the centre of the trap. It is noticed that when the optical lattice potential orthogonally shed on the Harmonic potential a linear relation exists between the energy and the chemical potential with anisotropy value and this linear relation becomes more clear at high value of anisotropy while the wave function behavior increases exponentially with anisotropy values. Furthermore, we have studying the effect of Factor ???????? and Factor ???????? on the Wave Function behavior under the harmonic potential trap plus the optical lattice potential .

دراسة مقارنة بين ليزرات الابار الكمية والنقاط الكمية == Comparative Study Between Quantum Wells and Quantum Dots Lasers

Author name: وطن حمود جبر
Supervisor name: جاسب عبد الحسين مشاري
General topic: Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: In the work we present a comprehensive comparison between the dynamics of quantum well and quantum dot semiconductor lasers working autonomously using two models, the first describe the temporal variation of carriers and photon densities respectively in the quantum well lasers and the second describe the carriers occupancies in the wetting layer and quantum dot and photon occupancy in the quantum dot lasers .The study was carried out on the delay time and level of the dc part of their power under the effect of the many parameters that appeared in those models. Both lasers dynamics were studied in the presence of injection current modulation which enhances lasers power range from periodic to chaotic one with varieties of periodic states such as period.1, period.2, period.3, period.4 and period.6. Developed chaos was noticed to occur.We propose and investigate a simple method to obtain complex output power from both lasers via pulse shaping of the injection current. During the three methods studied we noticed similarities and discrepancies in both lasers dynamics.

دراسة تاثير ليزر النديميوم ياك (Nd+3 : YAG) النبضي على خلايا دم الانسان خارج الجسم == Study ofQ - Switched Nd+3 : YAG Laser Effect on Human Blood Cell in Vitro

Author name: منى جبر لفتة
Supervisor name: حسن حمادي محمد | مزاحم محمد عبد الله
General topic: Physics
Specific topic: Life Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: Nd+3 : YAG laser wavelength(1064)nm and the two other wavelength, namely λ=532nm and λ =355nm,were used. Many blood sample groups were exposed to these laser wavelengths to study the physical and biological effects appeared as a result of interaction of laser beams with human blood cells. Variable energy densities of these laser wavelength extended from (53.11mJ/cm2 to1990.45mJ/cm2) were employed in these experiments. Sixty human blood samples were collected which included mails with age between(20 - 35)years and weights between (60 - 75)gm. These samples were distributed into three groups : (a) The first group : Twenty human blood samples were exposed to laser (λ=355nm) with energy densities extended from (53.11mJ/cm2 to 1328.18mJ/cm2). The exposure time was fixed to (100sec) and the laser repetition frequency was (5Hz).White blood cells were counted before (control sample) and after laser exposure. types of WBC revealed, fluctuation in the count rates which didn’t reach the level of significant effect. The red blood cells results revealed a numerical changes in the Packed cell volume (PCV) depending on laser power densities. These Changes indicate that the laser affected the cells visbility . On the other hand, The spectroscopic results have been influenced, the optical properties of hemoglobin blood. The decrease in absorbance of hemoglobin and oxyhemoglobin as a function of laser influence gives a further evidence of changes in optical properties as compared with the control samples.(b)The second group : These group samples were exposed to laser wavelength (λ=532nm) with laser, energy densities range extended from (79.62mJ/cm2

دراسة تاثير الترابط والقدرة الضائعة في الموجهات المترابطة على كفاءة المجمع - الموزع البصري باستعمال طريقة الفروقات المحددة == Study The Effect of Coupling and Crosstalk in Directional Couplers on The Performance of Multi / Demultiplexers Using Finite Differences Method

Author name: منصور حنظل منصور زغير
Supervisor name: صباح مهدي محمد امين
General topic: Physics
Specific topic: Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: Directional couplers can be used to make important planar optical integrated circuits for optical communications, such as Mach - zehnder interferometers and wavelength division multiplexers. Wavelength division multi/demultiplexing of optical signals is an efficient means to increase the information density per fiber.Both the coupled mode theory and the FD numerical method are used in this study to analyze multiwaveguide DCs.In this thesis, we present an analytical expression for crosstalk of MWGDC based on relationship between the normal modes and local modes, where these modes are obtained numerically using FD mothed.Also, the mode field profile and their evolution along the structure are presented through the analytical expression and calculated numerically using FD method. With the help of this analytical expression, the input power can be controlled to be enter from a chosen hannel. This enable us to calculate the crosstalk that corresponds to a certain input channel.The transmission characteristics of a four channel multiplexer based on three MZI can be described in terms of the propagation matrices. In this study, the coupling coefficient of DC and the phase shift of MZI are treated to be wavelength dependent parameters. Crosstalk introduced by such process are also calculated.The transmission characteristics of three arm MZI as a DWDM is investigated theoretically by deriving the propagation matrix of 3WGDC using coupled mode theory. Thus, two parameters are introduced,  and  , as a designing controlling parameters for DWDM devices. By adjusting these parameters a DW DM devices can be presented.

دراسة نظرية للتركيب الالكتروني الحجمي والسطحي لسبيكة نصف هيوسلر FeCrSe والحد الفاصل (111) FeCrSe/GaP == Theoretical Study of the Bulk and Surface Electronic Structure of the Half Heusler Alloy FeCrSe and the Interface of FeCrSe/GaP(111

Author name: مظاهر حبيب جولان الاسدي
Supervisor name: Mudhahir H. Jolan
General topic: Physics
Specific topic: Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: قدمنا في هذه الدراسة ايضاحات مهمة حول الخواص المغناطيسية والتركيب الالكتروني في سبيكة نصف هيوسلر FeCrSe. وقد بينت النتائج ان FeCrSe هي مادة فيرومغناطيسية نصف معدنية عند ثابت الشبيكة المتوازن هو 5.506Å، وان العزم المغناطيسي الكلي المحسوب هو 2μB يخضع تماما لقواعد سليتر - بولنك. بالاضافة الى ذلك، بحثنا على نطاق واسع الخواص الالكترونية والمغناطيسية والنصف معدنية للسطوح (001) و(111) لسبيكة نصف هيوسلر FeCrSe والحد الفاصل مع القاعدة GaP (111) باستعمال حسابات المبادئ الاولية ضمن نظرية الكثافة الدالية. وتوضح كثافة الحالات الذرية ان الصفة النصف معدنية المثبتة في الحجم FeCrSe تكون محفوظة عند السطح (001) المنتهي بـ CrSe - والسطح (111) المنتهي بـ Se - ، ولكنها فقدت عند السطوح (111) المنتهية بـ Fe - وCr - والسطح (001) المنتهي بـ Fe - . علاوة على ذلك، للحد الفاصل FeCrSe/GaP (111)، تكون الصفة النصف معدنية للحجم محطمة عند الهيئة Se - P بينما يبين الحد الفاصل والحد الثانوي الفاصل Se - Ga تقريبا استقطاب برم 100%. ضمن هذه الدراسة اوضحنا، من حسابات طاقات التلاصق (γ) للحد الفاصل ان الشكل او الهيئة Se - Ga هو اكثر استقرارا من الاخر Se - P. وايضا درسنا العزوم المغناطيسية، فلاحظنزايادة العزوم المغناطيسية المحسوبة لـ Se وGa عند الحد الفاصل Se - Ga (111) وP عند الحد الفاصل Se - P (111) مقابل قيم الحجم المناظرة لها بينما العزم المغناطيسي الذري لذرة Se عند الحد الفاصل Se - P (111) يقل. ونلاحظ ايضا ان العزوم المغناطيسية للحد الفاصل الثانوي لذرة Fe عند كلا السطحين الفاصلين Se - Ga (111) وSe - P (111) تقل مقارنة بقيم الحجم. | In this study, important illustrations about the electronic structures and the magnetic properties of half - Heusler alloy FeCrSe.The results show that FeCrSe is half - metallic ferromagnet at equilibrium lattice constant (5.506 Å). The calculated total magnetic moment of 2.00 μB follows quite well the Slater - Pauling rule . We investigate extensively the electronic, magnetic, and half - metallic properties of the half - Heusler alloy FeCrSe (111) and (001) surfaces and the interface with GaP (111) substrate by using the first - principles calculations within the density functional theory. The atomic density of states demonstrates that the half - metallicity verified in the bulk FeCrSe is maintained at the CrSe - terminated (001) and Se - terminated (111) surfaces, but it is lost at both Cr - and Fe - terminated (111) surfaces and the Fe - terminated (001) surface. Furthermore, for the interface of FeCrSe/GaP (111), the bulk half - metallicity is destroyed at Se - P configuration while Se - Ga interface and subinterface show nearly 100% spin polarization. We explained within this study, the calculated interfacial adhesion energies exhibit that Se - Ga shape is more stable than the Se - P one. We also studied the magnetic moments, The calculated magnetic moments of Se, Ga at the Se - Ga (111) interface and P at the Se - P (111) interface increase with respect to the corresponding bulk values while the atomic magnetic moment of Se atom at the Se - P (111) interface decreases. We also notice that the magnetic moments of subinterface Fe at both Se - Ga and Se - P (111) interfaces decrease compared to the bulk values.

قياس مستوى الاشعاع الطبيعي في منطقة القبلة في محافظة البصرة == The Measurement of Natural Radiation Level in Qubla District in Basrah Governorate

Author name: محمد قاسم خضير
Supervisor name: عبد الرضا حسين صبر
General topic: Physics
Specific topic: Solar Energy Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: The aims of this study is to measure the natural radioactivity in the selected areas from the province of Basrah using solid state nuclear tracks detectors SSNTDs both types of CR - 39 and LR - 115type Π to determine the concentration of radon gas. Gamma spectrometer Sodium Iodide NaI was used also to find specific activity of 238U, 232Th, 226Ra and 40K, in soil. This action is considered necessary from the point of view prevention of radiation hazard associated natural radioactivity of the soil in those areas and its impact on them. The first chapter includes an introduction to radiation and to shed light on the sources of radiation, natural and man made. Chapter 2 contains a highlight of radon gas and to identify the health effects of this gas as important sources of radiation in nature that can enter the human body through breathing. Chapter III contains the identification of the study area and samples collection of and preparation methods of the samples. The preparation of the measuring cylinder for measuring radon gas concentration at dwelling presented in the area. The natural gamma radioactivity measured by the NaI(Tl), also presented in the same chapter. This chapter also clarified; the equations used in calculations of radon gas concentration, the equations used to measure the specific activity of 238U, 232Th, 226Ra and 40K in selected soil samples taken from the area and assess the hazard indiceis caused by radioactivity (Raeq). Chpter 4, contains a review of methods used in the measurements includes materials and equipment used. Chapter five includes our findings from this study which is shows that, The radon gas concentration in dwelling has been measured found to be in the range of; 11.91 ± 1.3 Bq / m3 to 606.7 ± 66.52Bq / m3 with average value equal to 78.51Bq / m3, which is much less of the value specified by the United States Environmental Protection Agency EPA a 150Bq / m3 and this does not constitute a high risk to the health. The next part of this research; is the measurement of the natural gamma radiation emitted by the surface soil. We found that the lowest value for the concentration of isotope 226Ra is 2.5Bq / kg and maximum value was 147.4 Bq / kg with range of 47.3 Bq / kg. The minimum gamma concentration of 238U is 0.09 Bq/kg, while the maximum value is 94.7Bq / kg and an average of 23.5Bq / kg .The minimum concentration of 232Th is 1Bq / kg and maximum value of 83.9 Bq / kg at a range of 41.1Bq / kg. The minimum value of 40K was found to be 1 Bq / kg and the greatest value is 1048.6 Bq / kg and an average of 499.2 Bq / kg.All of these results are within the rangeof permitted and there is no rise in the value of the concentration of radioactive elements naturally calls for action to clean up pollution action cleaning , As for the soil of the region have indicated results found that the greater the intensity of the effects recorded in the soil of the area studied detector CR - 39 is 56187.5±3533.9 Track/cm2 while the lowest value was 1437.5±90.413 Track/cm2,which can be relied upon in radon concentration and content of radium account effective, but for the detector LR - 115TYPE it was found that the greatest density of the recorded Track 17250±1085 Track/cm2,while the less dense traces recorded Track 188±12Track/cm2 .

دراسة نظرية لفحص نقل الالكترون خلال نقطتين كميتن مقترنتين == Theoretical Study to Investigate the Electron Transport Through Double Coupled Quantum Dots

Author name: محمد عبد الزهرة نجدي
Supervisor name: هيفاء عبد النبي جاسم
General topic: Physics
Specific topic: Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: In this study, a model calculation is introduced for the electron transportthrough a system consists of two quantum dots coupled serially, embeddedbetween two nonmagnetic leads (source and drain), due to the importance ofthis kind of systems in many academic and experimental applications.In our treatment, the time independent Anderson - Newns Hamiltonian modelis considered as a basis to study the system dynamics and then to derive spindependentanalytical formula to calculate the occupation numbers of thequantum dots energy levels, the corresponding quantum dots energy levelsand the molecular virtual energy levels, as a function of bias voltage .These relations are solved self - consistently, which are all employed tocalculate the tunneling current. The differential conductance is calculatednumerically by using finite differences method.And as the efficiency of electron transport through coupled quantum dotsdepends on the system parameters such as the energy levels position of eachquantum dot, the Coulomb repulsion energy on each quantum dot, theeffective exchange energy, the tunneling coupling between the dots and leadsand the coupling energy between the two quantum dots, all these parametersare studied and investigated in details and the role of all these parameters inthe tunneling current and the differential conductance calculations ispresented. also our treatment is applied to two kinds of systems, when thequantum dots are symmetric and when they are asymmetric depending on ourchoice for the over mentioned parameters. Our treatment is utilized to studythe following : 1 - - - Two regimes are studied, the first is the strong coupling regime and thesecond is the weak coupling regime.2 - - - The role of the spin exchange interaction in determining the type ofinteraction (if it is attractive or repulsive) between the quantum dots.3 - - - The role of the spin exchange interaction between the quantum dots indetermining the coulomb blockade in the strong coupling regime.And according to our calculations, we conclude that at the strong couplingand when neglecting the effective exchange interaction, one can determinethe bias voltage values that correspond to the maximum values of thedifferential conductance which is equal to the value of the couplinginteraction between the quantum dots. And the maximum and minimumvalues in the differential conductance curve are changed when the quantumdots energy levels are lying below the energy reference. Also, ourcalculations that concern to the effective exchange interaction make it sure that our results can be utilized to study the electronics that related to the coupled quantum dots. Our calculations that related to the Coulomb blockade make it sure that one can use the quantum dots molecule as an electronic switch. Our calculations that concern to the gate voltage effect investigation in the case of equilibrium can be employed in the detection about the type of coupling with the environmental which effects directly in determining the rates of electron tunneling from the left lead to the active region and then to the right lead.

دراسة الخواص البصرية والكهربائية ومحدد القدرة البصري للصبغات العضوية المشوبة للاغشية البوليمرية == STUDY OF THE OPTICAL AND ELECTRICAL PROPERTIES,AND OPTICAL POWER LIMITING OF ORGANIC DYES DOPED POLYMER FILMS

Author name: فيصل صادق ثامر
Supervisor name: عماد الدين حسين علي السعيدي
General topic: Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: This thesis contains results of a extensive study for many important and fundamental properties of two organic dyes, these are Phenol Red and Light Green SF Yellowish. To obtain the dye doped polymer films used for our study, the Polymethylmethacrylate (PMMA) polymer was doped by each one of these dyes , at different concentrations : 0.01, 0.02, 0.03, 0.04, 0.05, 0.30, 0.40 mM . Effect of adding small amount of Iodine (I2) , as a dopant, to the constituents of the dye doped polymer films at concentration of 0.03 mM for each dye, on the optical and electrical properties of the polymer films, was also studied. Casting method was used for preparing the dye doped polymer films samples.The present work involves the study of the linear and the nonlinear optical properties, and the optical power limiting of the dye doped polymer films, as well as study of the electrical properties of these films.We have studied the optical properties of both the dye - doped polymer films and the dye - doped polymer films with Iodine (I2). The study includes the following parameters : absorbance (A), transmittance (T), reflectance (R),iiabsorption coefficient (α), extinction coefficient (k), refractive index (n), dielectric constant (ε) with its real (εr) and imaginary (εi) parts, optical conductivity (σopt.), electrical conductivity (σelec.), and optical energy band gap (Eg).The results of the optical properties show that the dye - doped polymer films having high transmittance (T) , low reflectance (R) , and low absorption coefficient (α ) , over the wavelengths of the visible spectrum, and these films have energy band gaps belong to the indirect transitions. While the dye - doped polymer films with added different doping ratio of Iodine (I2), have low transmittance (T) and an increase in the values of reflectance (R) and absorption coefficient (α ), particularly in the absorption regions over the wavelengths near the ultraviolet (UV) region of the the electromagnetic spectrum.To study the nonlinear optical properties of the dye - doped polymer films, the laser beam z - scan technique was used with solid state laser (SSL) operating at the continuous wave (CW) at 532 nm. The laser output can be varied within the range 0 - 100 mW. The obtained results showed that the samples of the dye - doped polymer films as well as the samples of the dye - doped polymer films with Iodine(I2) have a nonlinear refractive index with negative value (n2 < 0) (occurrence of the self - defocusing effect) and aiiinonlinear absorption coefficient with negative value also (β < 0) (occurrence of the saturable absorption).We have studied the optical power limiting for the prepared films samples , using the laser beam z - scan technique. We have obtained optical power limiting with good optical properties. The results revealed that the smallest value for optical power limiting threshold is 15 mW for the Phenol red dye doped polymer film sample at concentration of 0.03 mM with Iodine doping ratio 36.2 % of the dye weight.Also, The electrical properties of the prepared samples, the dye - doped polymer films and the dye - doped polymer films with Iodine (I2), have been studied using the current - voltage (I - V) characteristic for three temperature degree values , which are given to these samples, these are : 298 K, 308 K and 318 K. The values of the electrical conductivity (σ) and the electrical conductivity activation energy (Ea) of polymer film were calculated. The influence of changing the temperature on these parameters was studied.The results obtained from the present our study indicate that the two organic dyes, Phenol Red and Light Green SF Yellowish, are good candidates for optical applications and they could be used for the photonic devices, the photo - electronic devices , and also in the optical power limiting

دراسة الخواص البصرية والكهربائية لبوليمرPoly (3 - Hioxy Thiophene, 2 - 5 dily) (P3HT) وتاثير اضافة صبغة Orang G على تلك الخواص مع تطبيقه في صناعة الخلايا الشمسية == Study of the optical and electrical properties of Poly (3 - Hioxy Thiophene, 2 - 5 dily) (P3HT) and the effect of Orang G on the properties and it's application in Fabrication of solar cells

Author name: فاطمة حميد مالك التميمي
Supervisor name: وليد علي حسين
General topic: Physics
Specific topic: Solar Energy Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: تم في هذه الدراسة تحضير اغشية رقيقة من بوليمر P3HT غير المشوب والمشوب بصبغة Orang G وبنسب تشويب Vol(1%,3%,4%,5%,7%,10% ) وبوليمر PEDOT : PSS غير المشوب وقد حضرت الاغشية بطريقة طلاء البرم .Spin Coating شخصت الاغشية البوليميرية المحضرة بواسطة الاشعة السينية X - Ray والاشعة تحت الحمراء FT - IR . اظهرت نتائج فحص الاشعة السينية X - Ray ان النماذج المحضرة لبوليمر P3HT غير المشوب والمشوب، اذ تكون اغشية البوليمر P3HT غير المشوب ذات تركيب عشوائي ونتيجة التشويب بدات النماذج المحضرة تكون شبه بلورية نتيجة تاثير صبغة Orang G المستخدمة. كذلك شخصت النماذج المذكورة انفا بطيف الاشعة تحت الحمراء FT - IR اذ اظهرت النتائج ان لهذه الاغشية مجاميع فعالة واضحة. درست كذلك الخواص البصرية لجميع الاغشية المحضرة كالامتصاصية(A) والنفاذية (T) والانعكاسية R)) ضمن مدى الطيف (300 - 900nm)،ودرس ايضا معامل الامتصاص(α) ومعامل الخمود(K) ومعامل الانكسار(n) وثابت العزل الحقيقي (ϵr) وثابت العزل الخيالي (ϵi) والتوصيلية البصرية (σopt) كدالة للطول الموجي . اظهرت الدراسة ان طيف الامتصاصية لاغشية المواد قيد الدراسة ضمن منطقة الطيف المرئي، حيث تم تسجيل اعظم قمة لبوليمر P3HT غير المشوب والمشوب بصبغة Orang G عند الطول الموجي 530 - 572nm)) وكتف (Shoulder) عند الطول الموجي 600nm .اظهرت الدراسة ان طيف الامتصاص لبوليمر PEDOT : PSS غير المشوب يكون ذات امتصاصية واطئة بحدود (0.1a.u) ويكون ذو نفاذية عالية تصل الى 85% .حسبت فجوة الطاقة البصرية للبوليمر P3HT غير المشوب فكانت (1.95eV) وتتناقص قيمة الفجوة مع زيادة نسبة التشويب حتى تصل الى (1.88eV)عند نسبة التشويب 5% Vol - (O.G) - P3HT،كذلك تزايد في كلا من معامل الامتصاص(α) ومعامل الخمود(k). تم حساب التوصيلية الكهربائية باستخدام ميزة(I - V)،ووجد ان التوصيلية الكهربائية تزداد مع زيادة درجة الحرارة والتي تكون ضمن مدى(30 - 70OC) وهو السلوك الغالب لجميع الاغشية المحضرة وهذا يدل انها اشباه الموصلات . تم حساب طاقة التنشيط لجميع الاغشية المحضرة ووجد ان طاقة التنشيط لبوليمر PEDOT : PSS تكون قليلة وهي بحدود (0.41eV) وهذا يفسر التوصيلية الجيدة لهذا البوليمر . ووجد ان طاقة التنشيط لبوليمر P3HT غير المشوب تكون بحدود0.6eV وعند نسبة التشويب بنسبة 1% Vol(O.G) - P3HT تصل طاقة التنشيط 0.4eV وبزيادة نسبة التشويب الى 5% Vol (O.G) - P3HT تصل طاقة تنشيطه الى 0.23 eV . استثمرنا النتائج التي تم الحصول عليها لعمل خلية شمسية ذات الطبقة الواحدة وحسبت معاملات الخلية الشمسية باستخدام ميزة (J - V) ووجد انها تكون ذات كفاءة تصل الى 0.1% عند نسبة التشويب 1% Vol(O.G) - P3HT وذات كفاءة 0.2% عند نسبة الشوائب 5% Vol(O.G) - P3HT Vol(O.G) - P3HT . | In this study thin films of un doped P3HT and (1%,3%,4%,5%,7%,10 %) Orang G doping P3HT and un doped PEDOT : PSS, have been prepared using spin coating method . The prepared films were characterized under XRD and FTIR .The XRD spectra shows an amorphous structures of the un doping which were become semicrystline as a results of doping . The FTIR spectra of un doping P3HT and pure (O.G) shows principle functional group as recorded in literature .The UV - IS optical properties related to absorbance (A), Transmit (T) and reflectance (R) in the rang (300 - 900) nm have been studies to and absorption coeffienct (α), refractive index (n), extinction coefficient (K) and the real dielectric constant (ϵr), and a imaginary dielectric constant (ϵi) as well as optical conductivity( σopt)funacton of Wavelength.In this found that un doping of P3HT and O.G doping thin films have broad bound peaks in the rang ( 530 - 572nm) with as shoulder at the wave length 600nm .PEDOT : PSS shows high transmittance of 85% . The calculated optical energy gap for un doping P3HT be (1.95eV) , and decreases with increasing O.G of doping reached to (1.88eV) at 5% Vol (O.G) P3HT doping .It is also that absorption coeffienct (α) and extinction coefficient (K), increasing as function of wave length (λ).The electrical conductivity (σ) due at (I - V) characteristic for un doping and O.G - doping found to be increases with increasing temperature for (30 - 70oC), for all sample . Shows is Organic semiconductors behavior .A activation energy of prepared thin films were estimated and found to be (0.41,0.6 ,0.4 eV) and 0.23 eV for PEDOT : PSS un doping P3HT ( 1% Vol (O.G) - P3HT ) ,(5% Vol( O,G) - P3HT) nespectivity . A inlayer solar cells wave constructers from the upper mention un doping and evaluated ,and found to have efficacies(0.1% ,0.2%) respectively.

تحضير ودراسة الانتقالات الالكترونية للمواد المتراكبة من البولي يوريثان وصبغة البنفسج البلوري PU/CV والبولي يوريثان وصبغة الحمراء المتعادلة PU/NR == Synthesis And Study of the electronic Transition of Polymer Composite polyurathane , Crystal Violet (PU/CV) And polyurethane,Neuteral Red (PU/NR

Author name: عماد عبد الرضا عريبي
Supervisor name: علي قاسم عبد الله
General topic: Physics
Specific topic: Electronics Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: In equals weight percent age adding to them the organic dyes ,crystal violet (CV) and natural red dye (NR) were applied as indicator in bioapplication in percentage weight (10% ,20% ,30% ,40% ,50%) thin films were prepration by to methods, firest by spin coating to optical properties and cast methods to electrical properties thin films characterization by FTIR to estimated the functional groups forPU and dyes , were the charts indicated the reaction between the PU and NR , while the mix between PU and CV are polymer compositen TO study the crystallinty of thin films we are use the XRD , the result shows amorphas structers Optical properties were studies in wavelength range (300 - 900 nm) , and From absorption and transmittance spectra we are estimated some optical Parameters like the absorption coeffici ent (α) The thin films have Sharpe absorption edge and the indirect transition while Direct transition to percentage (40% , 50%) the indirect transition to PU/NR Thin films the energy gap increasing with increase the wight percentage to To PU/CV while decreasing to PU/NR thin films and the values (1.53 - 1.93eV ) , (1.83 - 1.78eV ) respectively . Urbach energy (Eu) were also calculated and increasing the value of urbach States with increase the weight percentage for all thin films prepared . TheSome optical parameters can be calculated such as extication coefficient (K) And refractive index (n) , the real and imaginary parts(1,2 ) and the optical, Electrical conductivities (opt ,e ) as function to photon energy . W - D model adopted to estimated some optical paramters such as ( λο , N/mο , Sο , e ,eo , nο , M - 3 , M - 1 , Eο ,Ed ) All parameters tabulated , the PU/CV were more response from the PU/NR Electrical conductivity studies for thin films prepared by al (PU/CV) , (PU/NR)/AL and from measuring the current - olage / Al Characterization we calculated the electrical conductivity and activation energy accompanying electrical conductance operation and the value were (610 - 10 - 1.210 - 8 S/cm ) , (0.84 - 0.57eV ) ,(210 - 12 - 8.3510 11 S/cm ) ,(0.46 - 0.56eV ) respectively . We can see the conductivity value for PU/CV larger than the value of PU/NR and with increase and decrease because these related to the mix and Time preparation of PU/CV and PU/NR and the final is reaction between PU and NR dye not physical mix

دراسة نظرية للخواص النووية للانوية السوجية - السوجية 198 - 208Po و200 - 210Rn و218 - 228Ra و218 - 228Th و226 - 236U ا بسثعمال انموذج البوزونات المتفاعلة بنسختيه IBM - 1 وIBM - 2 == Theoretical Study for the Nuclear Properties of the even - even 198 - 208Po,200 - 210Rn,218 - 228Ra, 218 - 228Th,226 - 236U by using the Interacting Boson Model IBM - 1 , IBM - 2

Author name: علي فاخر حبيب
Supervisor name: عبد الرضا حسين صبر
General topic: Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: This work aims to study the details the nuclear structure of selected heavy nuclei 198 - 208Po ,200 - 210Rn, 218 - 228Ra, 218 - 218 - 228Th and 226 - 236U, due to the important of nuclear structure of these nuclei in applied nuclear physics. In this study two IBM version have been used, IBM - 1 and IBM - 2. The versions of model used to described the ground band, quizi - beta and quadruple reduced transition probability B(E2) for selected transition. Also, the IBM - 2 version has been used to calculate the magnetic reduce transition probability B(M1) and mixing ratio for group transition emitted from ground band, quazi - beta and quazi - gamma band . the mixed symmetry states and the effect of majorana parameters of the energy of these state have been studied extensively .the potential energy surface of each isotope has been produced as contour lines using the output of IBM - 1.From the result calculation it is found that there is an agreement between the available experimental data and the calculated results of both IBM - 1 and IBM - 2 . The agreement concerns the energies of ground band and less in the beta and gamma band for 198 - 208Po isotopes. Also we have agood agreement in values of B(E2) and B(M1) from the results of the two version. It is noticed that all the studied isotopes are belong to the vibrational U(5) limit.The result of 200 - 210Rn isotopes show closed to the vibrational U(5) moving toward the O(6) . the calculated values are very closed the experimental data for the positive parity states of the ground, beta and gamma bands with increasing of energy value near the closed shell.The variable position of 218 - 228Ra isotopes between the three limits of IBM - 1 ((SU(3), O(6), U(5)) ,where is; these isotopes moving towards rotational away from the closed shell . We notice the excellent agreement between calculated values and available experimental data for energy level and other nuclear properties. The value of E41/E21 for 218 - 228Th isotopes decreases with moving away from the closed shell, in the same time; the values of level energies decreases also. The agreement between the experimental and calculated values of energy level is very clear for energy level and B(E2) and B(M1) values.All studied 226 - 236U are belong to the rotational SU(3) limit and both versions of the model succeed in producing such limit and found agood agreement for all the bands specially the IBM - 2. It is found that the change in the Majorana parameter FS has an effect on the energy of the mixed symmetry state in studies isotopes . The B(E2) values also calculated and compared with experimental data.In the comparison between all the studied nuclei it is found that systematic of energy level of single nucleus and all isotopes it is found that the energy of the first excited state is different for such isotope and also the ratio of E41/E21 found to be moving toward rotational limit with increase of atomic number. In the present work we found that the ratio N/Z is always agree when we used different isotopes in the studied nuclei

تحضير ودراسة خصائص الخلايا الشمسية الصبغية المتحسسة DSSCs == Preparation and Study The Properties of Dye Sensitized Solar Cells

Author name: علي عبود عبد الحجامي
Supervisor name: ستار جبار قاسم | باسل علي عبد الله
General topic: Physics
Specific topic: Solar Energy Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: يقدم هذا البحث نوعا من الخلايا الشمسية التي تستخدم صبغة عضوية حساسة للضوء. حيث تستخدم هذه الخلايا غشاءا رقيقا من مادة ثاني اوكسيد التيتانيوم مغطى بطبقة من صبغة عضوية لامتصاص الطاقة الشمسية وتحويلها الى الكترونات حرة بحيث تحقن الى طبقة ثاني اوكسيد التيتانيوم الذي يعمل كجامع للالكترونات. وتتكون ايضا من محلول الكتروليتي للتعويض عن الالكترونات المفقودة من جزيئات الصبغة العضوية. وفي هذه الدراسة جرى تحضير اغشية رقيقة من ثاني اوكسيد التيتانيوم TiO2 بطريقتين, الطريقة الاولى هي طريقة العجينة paste وكان سمك الغشاء المحضر بحدود 30 مايكرومتر والطريقة الثانية هي طريقة Sol - Gel باستخدام جذور التيتانيوم ايثوكسايد Ti(OCH2CH3) وكان سمك الغشاء المحضر بحدود 12 مايكرومتر. وفي كلا الطريقتين لتحضير اغشية TiO2 جرى ترسيبها على القواعد الزجاجية المعدة لذلك لغرض دراسة الخواص البصرية لها مثل الامتصاصية والنفاذية والانعكاسية ومعامل الامتصاص ومعامل الانكسار ومعامل الخمود وثابت العزل العقدي بجزئيه الحقيقي والخيالي وفجوة الطاقة البصرية المباشرة وغير المباشرة, وجرى دراسة الخواص التركيبية والسطحية لهذه الاغشية بواسطة SEM وXRD وAFM. ومن ثم جرى تحضير الانود الضوئي للخلية الشمسية صبغات المالجيت الخضراء والمثلين الزرقاء والرودامين بي المذابة الايثانول كلا على حدة, بعد ذلك نقوم بغمر الاغشية الرقيقة للـ TiO2 المرسبة على ITO المحضرة بالطريقتين (paste وSol - Gel) في محلول الصبغة ثم نستخرجها من محلول الصبغة لتجف لتكون جاهزة لتحضير الخلية الشمسية. حيث كانت المساحة الفعالة للـTiO2 المحضر بطريقة Pasteهي 0.2 سنتمتر مربع, بينما كانت المساحة الفعالة للـTiO2 المحضر بطريقة Sol - Gel هي 0.16 سنتمتر مربع. بعد ذلك تم تحضير القطب المضاد من تحضير عجينة الكاربون. وذلك بصب العجينة على القواعد الزجاجية الموصلة ITO واجراء المعالجة الحرارية له ليكون القطب المضاد جاهز للخلية الاستعمال في الخلية الشمسية. اما الالكتروليت فقد تم تحضيره باذابة الايودين I2 مع يوديد البوتاسيوم في احد المذيبات التالية (ethylene Glycol ,DMSO, ethanol) كلا على حدة لتحضير نماذج مختلفة من الخلايا الشمسية ودراسة الفرق في مميزة الخلايا الشمسية لكل مذيب على حدة. وبعد تحضير اجزاء الخلية بصورة منفردة تم جمعها بطريقة السندويج. وحسبت مميزة (التيار - فولتية) للخلايا باستخدام جهاز قياس الخواص الكهربائية ومصدر ضوء من الزينون, ومنها تم حساب كلا من فولتية الدائرة المفتوحة Voc وتيار الدائرة المغلقة Isc والقدرة العظمى Pmax وعامل الملئ F.Fوكفاءة الخلية η ومقاومة التوازي Rs ومقاومة التوالي Rsh. وفي خطوة اخرى تم اضافة كمية من نترات الفضة الى الالكتروليت لمعرفة تاثيره على معاملات الخلية الناتجة. وكانت افضل كفاءة جرى حسابها للخلية هي ذات صبغة المالكيت الخضراء MG حيث بلغت كفاءتها 0.741% لخلية ذات TiO2 المحضر بطريقة Sol - Gel و0.25% لخلية ذات TiO2 محضر بطريقة paste باستخدام الكتروليت ذات مذيب ethylene glycol وتحسنت بعد اضافة كمية محددة من نترات الفضة AgNO3 الى الالكتروليت لتصبح 0.912% للـ Sol - Gel و0.303 للـ paste. اما بالنسبة للخلية ذات صبغة الرودامين بي وكانت افضل كفاءة جرى حسابها بلغت 0.69% لخلية ذات TiO2 المحضر بطريقة Sol - Gel و0.224% لخلية ذات TiO2 محضر بطريقة paste باستخدام الكتروليت ذات مذيب ethylene glycol وتحسنت بعد اضافة كمية محددة من نترات الفضة AgNO3 الى الالكتروليت لتصبح 0.881% للـ Sol - Gel و0.704% للـ paste.اما بالنسبة للخلية ذات صبغة المثلين الزرقاء وكانت افضل كفاءة جرى حسابها بلغت 0.302% لخلية ذات TiO2 المحضر بطريقة Sol - Gel و0.113% لخلية ذات TiO2 محضر بطريقة paste باستخدام الكتروليت ذات مذيب ethylene glycol وتحسنت بعد اضافة كمية محددة من نترات الفضة AgNO3 الى الالكتروليت لتصبح 0.501% للـ Sol - Gel و0.15% للـ paste. حيث بينت الدراسة ان اعلى كفاءة هي للخلية ذات TiO2 المحضر بطريقة Sol - Gel وصبغة Malachite Green مع اضافة كمية من نترات الفضة الى الالكتروليت كانت, وان افضل مذيب للالكتروليت هو ethylene glycol. | This research involves in preparing solar cells that use a light - sensitive type organic dye. These cells produce the use of thin of titanium dioxide, that is covered with a layer of organic material, absorb solar energy and use it to free electrons. These electrons are injected into a layer of titanium dioxide. The cells also consist of a electrolyte solution to compensate for the lost electrons from the organic dye molecules. In this study, thin films of carbon dioxide titanium TiO2 is used to prepare in two ways, the first way is the way the paste and the membrane thickness about 30 micrometers. The second way is the way Sol - Gel using titanium Ethoxide roots and has been deposited thin membrane in the form of layers until obtain the desired thickness of Ti ( OCH2CH3) and the membrane thickness has 12 micrometers. In both methods the prepared membranes TiO2 were deposited on glass bases prepared for the purpose of examining the optical properties. Also, studies were made for structure and surface of this membranes by XRD and FESEM and AFM. Solar cells are prepared by dissolving amount of dyes Malachite Green, Methylene Blue and Rhodamine in ethanol separately, Then immersing the thin film of TiO2 precipitated the ITO prepared both ways (paste and Sol - Gel) in the dye solution, then bit we produce here from the dye solution to dry to be ready to prepare the solar cell. Where the effective area of the TiO2 is prepared by Paste is about 0.2 square centimeter, while the effective area of the film in a way TiO2 was prepared by Sol - Gel is about 0.16 square centimeter. The counter electrode is made by preparing a paste of carbon as been the Carbon powder Black is the size of nanoparticles to slimy of TiO2 solution, then adds to distilled water to the mixed using a rock and mortar (Mortar), and then pour the dough rules on the glass conductive ITO, and subjected to heat 250 degree Celsius for one hour to be ready to counter - electrode cell used in the solar cell. The electrolyte uses in this research as prepared by dissolving the amount of iodine I2 with the amount of potassium iodide in one of the following solvents (ethylene Glycol, DMSO, ethanol) away from light to study the difference between the electrolyte resulting from these solvents. It is after the solar cell DSSC pigment assembly. The calculated characteristic (current - voltage) of cells using Keathly device and light source of xenon, Both the open circuit voltage Voc and the closed - circuit current Isc and the vast ability Pmax factor overfilling F.F and efficiency of the cell η and the parallel resistance Rs and series resistance Rsh were calculated . In another step it has been added to the amount of silver nitrate to the electrolyte to see its effect on the resulting cell parameters. The best efficiency is calculated for the cell of a dye Malachite green MG which of efficiency reached 0.741% for the cell with TiO2 at the Sol - Gel and 0.25% for the cell with TiO2 at the paste using electrolytes with solvent ethylene glycol and improved after the addition of a specific quantity of silver nitrate AgNO3 to the electrolyte to become 0.912% of Sol - Gel and 0.303 of the paste. The cell with a dye Rhodamine B is studfish best and found to have efficiency 0.69% of the cell with TiO2 that formed as Sol - Gel and 0.224% for the cell with TiO2 paste using electrolytes with solvent ethylene glycol and improved after the addition of a specific quantity of silver nitrate AgNO3 to the electrolyte to become 0.881% of Sol - Gel and 0.704% of the paste. The efficiency of the cell with a dye Methylene Blue is calculated and found to be 0.302% for the cell with TiO2 prepared by the Sol - Gel method and 0.113% for the cell with TiO2 prepared by the paste method using electrolytes with solvent ethylene glycol and improved after the addition of a specific quantity of silver nitrate AgNO3 to the electrolyte to become 0.501% of Sol - Gel and 0.15% for paste. This study shows that the highest efficiency of the cell prepared by the TiO2 Sol - Gel method and dye Malachite Green, When the amount of silver nitrate was added to the electrolyte, and the best solvent of the electrolyte was ethylene glycol.

دراسة الخواص البصرية والكهربائية لصبغات عضوية == Study of optical and electrical properties of organic dyes

Author name: علي ستار جبار الصيمري
Supervisor name: وليد علي حسين | فرات احمد مهدي
General topic: Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: In this study, thin films of polyvinyl alcohol (PVA) doped with Orange G , Safranin O , and Crystal Violet dyes , have been prepared by using casting method after dissolving the dyes with distilled water .The linear optical parameters of the prepared thin films such as absorption coefficient (α) , extinction coefficient (k) , refractive index (no) and energy gap (Eg) , in addition to Urbach tails (Eu) , both real (εr) and imaginary (εi) parts of the dielectric constant , optical conductivity (σopt) , and electrical conductivity (σele) have been studied. The non linear absorption coefficient (β), non linear refractive index (n2) and the susceptibility of the third order (χ3) have been studied too .It is found that the absorption spectra of the prepared thin films are characterized by a clear absorption peaks in the visible range of the light spectrum . For Orange G two absorption peaks were appeared at the wavelengths (325 nm) and (490 nm) , where as one absorption peak is observed for each of Safranin O , and Crystal Violet at the wavelength (540nm) and (600nm) respectively. It is worth noting that the different concentrations of the dyes have an obvious traces on the absorption intensities of the thin films , which may be related to the extended Urbach tails as a result of increased dye concentration and (π - π*) transition .The estimated energy gaps gave an indication that an indirect allowed electronic transition take place and it is inversely slightly affected by the concentration of the dyes.The non linear optical properties for the prepared thin films were studied using Z - scan technique . Three different cases in which the materials are ; thedye solution consist of the dye dissolved in distilled water , the dye solution mixed with the polymer , and the dye doped thin polymer film , were studied using continuous wavelength (532 nm) solid state semiconductor laser type (SDL - 532 - 100T) .The results indicated that the calculated (β) and (n2) increases as a results of increase in the concentration for all the three mentioned cases . Defocusing due to thermal distribution through the samples which were accompanied with a changes in non linear refractive index were shown , that is , the samples behave like a thermal lens that distort the phase of the propagated beam in it .The (I - V) characteristics for all thin films give an indication of Ohmic behavior and the DC electrical conductivity (σele) increases as the temperature increase . The activation energies (Ea) were found to be decrease at higher dyes concentrations .

حسبة كثافة الحالات الالكترونية للسطح في تفاعل الايونات البطيئة مع سطوح المعادن والاغشية الرقيقة == Calculation of surface density of states in slow ion interaction with metal surfaces and thin films

Author name: علاء عادل شنيف الغزي
Supervisor name: طالب عبد النبي سلمان
General topic: Physics
Specific topic: Electronics Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: This study included in using a theoretical model that already made to calculate the probability of the electronic Emission from the surfaces of Metals as a result of helium ion scattering at these surfaces , the ions motion is at the direction of the surface and depends on the atomic level broadening and the emitted electrons spectrum , also on probability of neutrality or survival of the ion , to initiate the theoretical model to calculate the electronic density of states of the surfaces of metals and thin films using experimental data of previews studies of the Auger neutralization spectrum for this surface .From the experimental data we calculate the Auger transform , , considering the electronic density of states in the valence band to the surface as convolution forming to Auger transform and by using fourier,s transformations we get the electronic density of states at the surfaces of Nickel Ni, Copper Cu, Aluminum Al and tungsten W and for same thin film such of MgO , MgCaO, MgSrO.

تحضير ودراسة بعض الخصائص الفيزيائية للمتراكب بولي انلين طين الكاؤولين العراقي == Preparation and study of the Some physical properties of imbricated Polly Aniline - IraqiAlca?lan clay

Author name: عباس عبد سويف البديري
Supervisor name: غفران محمد باقر شبيب
General topic: Physics
Specific topic: Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: Polyanilin/Alcaulan Iraqi clay was modify by mecanochemical method with ideal condition and temperature range (0 - 5)0c after distillation Aniline (monomer) well.Several techniques have been used such as FT - IR ,X - ray to determine the crystalline ,scanning electron microscope (SEM) and finally (FAM) in order to study the surface roughness mediated .Many of physical properties such as mechanical properties which represented by hardness curves at different temperature which proved in hardness values range (2 - 7) for Alcaulan clay and (3 - 9.5) for PAni/Alcaulan while the results of tests fracture resistance (according to Brazilian way ) in different temperature was (2.9 - 4.92) for Alcaulan clay and (3.1 - 5.01) for PAni/Alcaulan .Optical properties show the type of electronic transition which found indirect transition and the optical energy gap about 2.15 eV.PAni/Alcaulan films was prepared by adding hydrochloric acid HCL after dissolved it in DMF as well as with addition to sulfuric acid H2SO4.The value of electrical conductivity of PAni - HCL/ Alcaulan are (0.4*10 - 7, 0.6*10 - 7, 0.7*10 - 7, 0.8*10 - 7, 0.9*10 - 7) s/cm. The value of PAni - H2SO4/Alcaulan are (4*10 - 7, 6*10 - 7, 6.5*10 - 7, 7.3*10 - 7, 9.1*10 - 7) s/cm.Also the value of electric conductivity of PAni - HCL/ Alcaulan with Iodine are (2*10 - 7, 6*10 - 7, 8*10 - 7) s/cm , and of PAni - H2SO4/Alcaulan are (19*10 -

تضمين البرم في ليزرات اشباه الموصلات (ليزرات البرم) == Spin Modulation in Semiconductor Lasers (Spin lasers

Author name: ضیاء جبار عكوش
Supervisor name: حسن عبد الله سلطان
General topic: Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: The introducing of electronic spin with its charge is the key of many applications which uses the electrical and magnetic properties of the electron , (spintronics )and semiconductor lasers.This concept gives led to the newest type of semiconductor lasers called ( Spin Lasers ).In the present thesis a numerical study of the effect of the carriers spin on the semiconductor lasers described by VCSEL using Matlab and Runge - Kutta method .The study includes the effect of the spin polarization in terms of the polarization injection and the injection current also to find the two thresholds of right polarized light circularly and the left circularly polarized one.The effect of the spin relaxation time on the dynamics of spin - VCSEL such as the steady state time evolution and direct modulation of the injection current and the polarization injection were studied also is presented too.The study shows that the spin VCSEL strongly affected by the injection current , polarization injection and spin relaxation time.The present results show that the laser threshold can reduced to quarter than that of conventional laser.

تحضير ودراسة بعض الخواص الكهربائية والبصرية للبوليمر الموصل بولي (انيلين اوكزالك) - وامكانية تطبيقاته في الخلايا الشمسية == preperation and studying some of the electrical and optical properties of conducting polymer poly(aniline - oxalic) and the possibility of its applications to solar cell

Author name: صفا نزار رمضان
Supervisor name: غفران محمد باقر شبيب
General topic: Physics
Specific topic: Solar Energy Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: We present in this study away of preparing Poly(aniline - oxali) (PAni - ox) by a Chemical polymerization with an ideal environment and temperature (5 - 0)0C. The Optical properties have been studied included the absorbance and transmitance measurements and calculations of the energy gap for (PAni - ox), which was found equal to (2.6eV). Electrical properties of (PAni - ox) have been also studied. The electrical conductivity for these materials was ( 8.22x10 - 2S.cm - 1) at room temperature.Thin films of titanium dioxide TiO2 of particle size (50 nm) and (25 nm) have been prepared and then deposited on a conductive glass bases Fluorine doped tin oxide (FTO) to study the optical properties.The materials under study have been diagnozid by using several techniques including X - rays (XRD) technique to determine the crystalline structures , Infrared (FT - IR) to determine the effective groups ,and Atomic Force Microscope (AFM) to determine the surface roughness and the regularity range of the nanoparticles compositions. Optical Anode was prepared by adding (PAni - ox) to TiO2, and the efficiency of the solar cell was calculated Two types of pigments alpha - Naphtholbenzein and EOSIN Y were added to TiO2 films and the prepared polymer is (PAni - ox). The pigments absorbs the solar energy and converte it to free electrons that are injected into titanium dioxide, which works as a collector for electrons. Electro solution was added to compensate for the loss electrons from the organic dye molecules. Thereafter, the electrode for the solar cell was prepared from carbon which has been obtained from candle flame.After preparation, the individual parts of solar cell have been collected by multi - layeres method . The (carrent - voltage) feature for cells by electrical properties have beem measured device and Light source.From this measurement , we calculate the open circuit voltage Voc and closed - circuit current Isc ,maximum power Pmax ,filling factor F.F, cell efficiency η, and Parallel resistance Rs and Resistance respectively Rsh.
1 ... 324 325 326 327 328 ... 530