Show: 25 50 75 100 Results

Search results: 25 out of 3,281

تحضير وتشخيص 4,1 - بس (اميدازول - 1 - يل مثيل) بنزين - سليكا ودراسة فعاليته كعامل مساعد == Synthesis and characterization of 1,4 - bis (imidazole - 1 - yl methyl) benzene - silica and its catalytic activity

Author name: نهلة غازي فهد
Supervisor name: قاسم محمد حلو
General topic: Chemistry
Specific topic: Chemistry
Degree: Master
Language: English
University location: Muthanna
First pages:
Abstract: في هذه الدراسة تم استخلاص السيلكا من قشور الرز عن طريق غسل قشور الرز مرات عديدة بالماء المقطر، ثم عوملت مع محلول (1مولاري) من حامض النتريك، بعد ذلك احرقت في فرن بدرجة حرارة 800 درجة مئوية ، تم تحويل السليكا الناتجة الى سيليكات الصوديوم بعد ذلك تم مفاعلتها مع CPTES ينتج سليكا ذات مجموعة وظيفية --CH2Cl رمز لها بالرمز .RHACClتم تحميل الاميدازول المتفاعل مع كلوريد بارزاايلين على سطح .RHACClلتكوين العامل المساعد غير المتجانس رمز له .RHAPrIM تم تشخيص العامل المساعد بعدة تقنيات منها تحليل العناصر والتحليل الوزني الحراري TGA/DTA وتحليل امتزاز النتروجين ومطيافية الاشعة تحت الحمراء FT-IR وكذلك اطياف الرنين النووي المغناطيسي للحالة الصلبة لنواة ذرتي الكربون والسيليكون ( ( 29Si , 13C MAS NMRوكذلك المجهر الالكتروني الماسح SEM والمجهر الالكتروني النافذ.TEM طبقا الى نتائجCHN ،.EDXلوحظ زيادة نسبة الكربون اكثر مما هي عليه في RHACCl وبين التحليل كذلك وجود نسب من النتروجين والتي لم تكن موجودة سابقا في المركبRHACCl. اظهر تحليل الرنين النووي المغناطيسي للحالة الصلبة لنواة ذرة السيليكون29Si وجود ازاحات كيميائية تعود الى Q4،Q3 ، T3، T2 عند ازاحات كيميائية في الطيف حسب الادبيات. اما تحليل الرنين النووي المغناطيسي للحالة الصلبة لنواة ذرة الكربون13C اظهر حزما عند مواقع كيميائية مختلفة تعود لذرات الكربون في العامل المساعد المحضر. في حين بينت نتائج التحليل الحراري TGA/DTA امكانية استخدام العامل المساعد حتى 277 درجة مئوية دون ان يتفكك . وطبقا لصور المجهر الالكتروني النافذ TEM ظهرت دقائق ذات اشكال منتظمة وبحجم 5 نانومتر ، بعضها ملساء والاخرى كانت مسامية.درست الفعالية التحفيزية للعامل المساعدRHAPrIM في حمل ايون النتريت لتحضير حامض النتروز المستخدم في تحضير املاح الدايزونيوم . يعتبر حامض النتروز المادة الاساسبة لتحضير الاصباغ ، حيث حظرت اصباغ مختلفة عن طريق تفاعل الازدواج بين المركبات الاروماتية واملاح الدايزونيوم. شخصت الاصباغ المحضرة بواسطة تحليل العناصر، FT-IR واطياف UV-Vis . لوحظ تطابق النتائج العملية والمحسوبة لتحليل العناصر لمركبات الازو المحضرة. تم اعادة استخدام العامل المساعد عدة مرات و بثباتية عالية. == In this study, silica was extracted from rice husk via washing rice husk many time with distilled water, and then treated with 1.0 M of Nitric acid; finally, it was burned in an oven at 800 oC. The ash was converted to sodium silicate and reacted with chloropropyltriethoxysilane to form RHACCl. Imidazole with p-xylylene dichloride was loaded onto RHACCl in the form of p-xylylbisimidazole to form solid catalyst donated RHAPrIM. Various analytical techniques were well characterize the catalyst including CHN analysis, TGA/DTA, FT-IR, N2-adsorption desorption study, 29Si &13C MAS NMR spectra TEM, SEM and EDX. According to the CHN results, it was noticed that the carbon percentage increased from (11.70%) in RHACCl to (16.704%) in RHAPrIM; also the results were showed a present of nitrogen in RHAPrIM which was not present in RHACCl. Silicon solid-state nuclear magnetic resonance showed Q4, Q3, T3, and T2 chemical shifts at expected position. 13C spectrum showed different peaks at different chemical shifts related to the carbon structures of the organic moieties. Thermal analysis showed that the catalyst could be used safely up to 277 ºC. TEM images of RHAPrIM showed regularly shaped particles with an estimated size 5 nm. Some particle seems to be smooth in shape, while the others showed a porous shape. The catalytic activity of RHAPrIM was examined in-situ preparation of nitrous acid which was used in the preparation of diazonium salt. The RHAPrIM was used to produce nitrous acid via it’s reaction with nitrite ions. Nitrous acid is the key start materials for dyes preparation via diazonium salt. Coupling reaction of aromatic compounds was carried out with a diazonium salt to yield a mono azo dye. All dyes were characterized by elemental analysis, FT- IR, and UV-Visible spectra. Both calculated and found results of elemental analysis of prepared azo compound were match with each other. The catalyst was stable and regenerated within a simple experimental procedure

تحضير وتشخيص بعض مونيمرات وبوليمرت جديدة محتوية على حلقات غير متجانسة ودراسة خواصها الحرارية والفعالية البايولوجية == Synthesis and Characterization of Some New Monomers and Polymers Containing Heterocyclic Rings and Study Their Thermal Properties and Biological Activity

Author name: غادة مهدي كامل الزبيدي
Supervisor name: هلال مسعود عبد الله | ابتسام خليفة جاسم
General topic: Chemistry
Specific topic: Chemistry
Degree: Doctorate
University: University of Baghdad
Language: English
University location: Baghdad
First pages:
Abstract: يتضمن موضوع البحث تحضير مركبات حلقية غير متجانسة ثلاثية (الازردين و فنيل ازردين), خماسية (اوكسادايازول و ترايازول و تترازول), وخماسية ملتحمة (بنزوثايازول) والتي استخدمت لتحضير العديد من البوليمرات. | الجزء الاول : | يتضمن هذا الجزء تحضير مركب 2,3(1-ازردين)ماليك انهدريد[1] وبلمرته مع اثلين كلايكول و 1,3-بروبلين دايول و كليسيرول000الخ للحصول على رابطة استرية كما موضح بالشكل ادناه : | الجزء الثاني : | يتضمن هذا الجزء تحضير مركب 2,3(فنيل ازردين)ماليك انهدريد[12] وبلمرته مع اثلين كلايكول و 1,3-بروبلين دايول و كليسيرول000الخ للحصول على رابطة استرية كما موضح بالشكل ادناه : | الجزء الثالث : | يتضمن هذا الجزء تحضير مركب 3,2,ثنائي [2-مركبتو-5-يل-4,3,1-اوكسادايازول]1-ازردين [24] وبلمرته مع ثنائي كلوريدات الحامض للحصول على رابطة ثايواسترية كما موضح بالشكل ادناه : | الجزء الرابع : | يتضمن هذا الجزء تحضير مركب بنزوثنائي-2-امينوثايازول [29] وبلمرته مع ثنائي كلوريدات الحامض للحصول على رابطة امايدية كما موضح بالشكل ادناه : | الجزء الخامس : | يتضمن هذا الجزء تحضير مركب 4,1-ثنائي [3-مركبتو-4-(5-(بارا-فنيل)تترازولين)-5-يل-4,2,1-ترايازول] بيوتان [34] وبلمرته مع ثنائي كلوريدات الحامض للحصول على رابطة ثايواسترية كما موضح بالشكل ادناه : | * شخصت (المونمرات والبوليمرات) المحضرة باستخدام مطيافية FT.IR وUV/Vis و 1HNMR و 3CNMR وCHN كما قيست درجات انصهارها. | *درست اللزوجة و الصفات الحرارية لبعض البوليمرات المحضرة. | *كما تم تقييم الفعالية الحيوية لبعض البوليمرات المحضرة لتحديد امكانية استخدامها كمركبات ذات تطبيقات طبية. | == This work involves synthesis of different three (Aziridine, Phenyl azridine), five (Oxadiazole, Triazole, Tetrazole), and fused five (benzothiazole) member heterocyclic rings which used as a monomer for preparing many different polymers. | First part : | This part involves the synthesis of 2,3[1H-aziridine]maleic anhydride[1] and polymerized with ethylene glycol, 1,3-propylene diol, glycerol,…..etc. to get the polymers having ester linkage as shown below | This part includes the synthesis of 2,3[1-phenyl-aziridine]maleic anhydride[12] and polymerized with ethylene glycol, 1.3-propylene diol, glycerol,…..etc. to get the polymers having ester linkage as shown below This part includes the synthesis of 2,3-Bis[2-mercapto-5-yl-1,3,4-oxadiazole]1H-aziridine[24] and polymerized with diacid chlorides to get the polymers having thioester linkage as shown belowThis part contains the preparation of five member rings fused with benzene ring, its Benzobis-2-aminothiazole [29] and polymerized with diacid chlorides to get the polymers having amide linkage as shown belowIn this part, the compound 1,4- Bis[3-mercapto-4-(5-(p-substituted phenyl)tetrazolin)-5-yl-1,2,4-triazole]butane [37], [38] and polymerized with different diacid chlorides to get the polymers having thioester linkage as shown below In this part, the compound 1,4- Bis[3-mercapto-4-(5-(p-substituted phenyl)tetrazolin)-5-yl-1,2,4-triazole]butane [37], [38] and polymerized with different diacid chlorides to get the polymers having thioester linkage as shown below

التقدير الطيفي للنحاس (II) والفضة (I) والبلاديوم(II) باستخدام الكاشف العضوي 2 - (3 - برومو فنيل ازو) - 5,4

Supervisor name: قاسم حسن كاظم
General topic: Chemistry
Specific topic: Chemistry
Degree: Master
Language: Arabic
University location: Babylon
First pages:
Abstract: تضمن البحث تحضير الكاشف العضوي 2- (3- برومو فنيل ازو) -5,4- ثنائي فنيل اميدازول (3-BrPAI) وقد تم تشخيص الكاشف المحضر باستخدام تقنيتي الاشعة تحت الحمراء والاشعة فوق البنفسجية والمرئية . | اجريت دراسة اولية لتفاعل الكاشف (3-BrPAI) مع 30 ايون فلزي مع استحداث طريقة طيفية لتقدير كل من النحاس (II) , الفضة(I) والبلاديوم (II) باستخدام هذا الكاشف ,اذ كان الطول الموجي للامتصاص الاعظم للمعقدات الثلاثة هو (506) و (502) و (520) نانوميتر لكل من النحاس والفضة والبلاديوم على التوالي, فضلا عن تحديد الظروف الفضلى لتقدير هذه الايونات بهذا الكاشف مثل حجم محلول الكاشف , والفترة الزمنية ,و درجة الحرارة وتاثير الدالة الحامضية . | حدد منحني المعايرة لمعقدات هذه الايونات مع الكاشف فكان مدى التراكيز التي تطاوع قانون بير بالنسبة للنحاس (II) يقع ضمن المدى (0.01-0.7) جزء بالمليون وبمعامل ارتباط (r= 0.9987) وقيمة معامل الامتصاص المولاري ε تساوي 3.2 ×104 لتر. مول-1 . سم-1 , وللفضة (I) يقع ضمن المدى (0.01-1) جزء بالمليون وبمعامل ارتباط (r=0.9979) وقيمة معامل الامتصاص المولاري ε تساوي 3.7 × 104 لتر. مول-1 . سم-1 , اما بالنسبة للبلاديوم (II) فكان منحني المعايرة يقع ضمن المدى (0.01-0.7) جزء بالمليون وبمعامل ارتباط (r=0.9994) وقيمة معامل الامتصاص المولاري ε تساوي 5.4 × 104 لتر. مول-1 . سم-1 . | درست طبيعة المعقدات الذائبة المتكونة من خلال ايجاد نسبة الايون الفلزي الى الكاشف (L : M) باستعمال طريقتي التغيرات المستمرة والنسب المولية فكانت تساوي (2 : 1) بالنسبة لمعقدي النحاس والبلاديوم وبنسبة (1 : 1) لمعقد الفضة . | تم حساب درجة التفكك (α) وثابت الاستقرارية (Ksta.) للمعقدات المتكونة فكانت قيمتها بالنسبة لمعقد النحاس (α= 0.16 و Ksta.= 5.1×109 لتر2. مول-2 ) ولمعقد الفضة ( α= 0.21 و Ksta.= 1.8× 105 لتر .مول-1 ) ولمعقد البلاديوم (α=0.18 و Ksta. = 3.5×109 لتر2. مول-2 ) . | حدد ضبط الطريقة التحليلية المتبعة ودقتها باستعمال محاليل قياسية من هذه الايونات مع تركيز قياسي للكاشف فكانت بالنسبة الى تركيز (0.25) جزء بالمليون نحاس (%R.S.D= 0.79%) و (%Erel.= 2%) و (%Re= 102%) و (D.L= 0.006 جزء بالمليون ) ولتركيز (0.25) جزء بالمليون فضة (I) كانت (%R.S.D= 1.2%) و (%Erel.= -1.2%) و (Re=98.8%) و (D.L= 0.009 جزء بالمليون) ولتركيز (0.25) جزء بالمليون بلاديوم (II) فكانت (%R.S.D=0.83%) و (%Erel.= 2.4%) و (%Re= 102.4%) و (D.L= 0.006 جزء بالمليون ). | كما عينت التداخلات المحتملة لايونات Cd2+, Co2+ , Hg2+ , Ni2+ , Zn2+ زيادة على الايونات قيد الدراسة والتي يمكن ان تتداخل مع بعضها البعض , اذ تم الحجب باستعمال عوامل حجب مناسبة . | تمت دراسة رواسب المعقدات من خلال تحديد بعض الصفات الفيزيائية لها مثل درجة الانصهار وقابلية الذوبان والتوصيلية المولارية بالاضافة الى دراسة طيف الاشعة تحت الحمراء لها ومقارنتها مع طيف الكاشف مع اقتراح الصيغة التركيبية للمعقدات المتكونة . | واخيرا تم اجراء تطبيق للطريقة التحليلية المتبعة وذلك بتقدير ايون النحاس في عينات مصل دم الانسان وماء شط الحلة وقورنت النتائج مع نتائج مطيافية الامتصاص الذري عديم اللهب . | == The research includes the preparation of the organic reagent 2-(3- Bromophenylazo)-4,5-diphenyl imidazole , and this reagent identified by using infrared and ultraviolet visible techniques. | A primary studies of the reaction between the reagent (3-BrPAI) with 30 metal ions were done, and a spectrophotometric method for the determination of copper (II) ,silver (I) and palladium (II) with this reagent was developed. The wavelength of maximum absorption for the complexes formed between these ions with this reagent was found at (506 , 502 , 520 ) nm for copper , silver and palladium respectively , also best conditions for the determination of these ions were employed , such as the volume of reagent solution , time, temperature and effect of pH. | Calibration curves of these complexes were constructed. Beer’s law was obeyed in the range (0.01-0.7) ppm for copper with a correlation coefficient (r = 0.9987) and molar absorptivity ε= 3.2x104 L. mol-1. cm-1 and for silver the range was (0.01-1) ppm with a correlation coefficient (r =0.9979) and molar absorptivity ε= 3.7x104 L.mol-1. cm-1 and for palladium the range was (0.01-0.7) ppm with a correlation coefficient (r =0.9994) and molar absorptivity ε= 5.4x104 L. mol-1. cm-1 . | The stoichiometry of the soluble formed complexes were investigated by both the continuous variation and mole ratio methods , the ratio (M : L) was (2 : 1) for both copper and palladium complexes at and was (1 : 1) for silver complex . | The degree of dissociation (α) and the stability constant (Ksta.)of the complexes were calculated . They were equal to (α=0.16 , Ksta.=5.1x109 L2. mol-2) for copper complex and (α=0.21 , Ksta.=1.8x105 L. mol) for silver complex and (α=0.18 , Ksta.=3.5x109 L2. mol-2) for palladium complex , this refers to that these complexes have a high stability . | Precision and accuracy of the analytical procedure showed for (0.25) ppm of Cu(II) , Ag(I) and Pd (II) that R.S.D% was equal to (0.79 , 1.2 , 0.83 )% and (Erel. , Re )% were found to be (2, 102 )% , (-1.2 , 98.8)% , (2.4 , 102.4 )% for these ions , with D.L equal to ( 0.006 , 0.009 , 0.006 ) ppm for Cu(II) , Ag (I) and Pd (II) , respectively . | The interferences of Zn2+ , Ni2+ , Co2+ , Hg2+ Cd2+ ions , as well as the studied ions were described , and they masked with suitable masking agents . | The physical properties of the complexes precipitates were achieved through establishment of melting point, solubility, molar conductivity as well as measurement of infrared spectra ,with the suggested of structural formula of the formed complexes . | Finally , application of analytical procedure was performed for the determination of copper in the serum of human blood and in samples of water of Shatt Al-Hilla and the result obtained were compared with flameless atomic absorption method |

التبادل الايوني السائل لاستخلاص بعض العناصر باستعمال مركبات عضوية وتطبيق الطريقة على فصل وقياس العناصر في نماذج بيئية وحياتية == Liquid Ion Exchange to Extract Certain Elements Using Organic Compounds and the Application of the Method on the Separation and Measurement of the Elements in Environmental and Vital Samples

Author name: صفاء مجيد حميد الحساني
Supervisor name: رافع قدوري الكبيسي | خليل ابراهيم حسين
General topic: Chemistry
Specific topic: Chemistry
Degree: Doctorate
University: University of Baghdad
Language: English
University location: Baghdad
First pages:
Abstract: iquid ion exchange method is one of solvent extraction applications used for separation and spectrophotometric determination of Lead (II) and Aluminium (III) as chloroanion complexes (PbCl4=, PbCl3 - , AlCl4 - ) byusing the crown ether 15C5 dissolved in chloroform as organic reagent.Where Pb(II) is extracted from HCl media whilst Al(III) is extracted from neutral NaCl media. The first step determined the maximum absorbance wave length for ion pair association complex extracted to the organic phase the results were λmax=241nm for Pb(II) and λmax=240nm for Al (III) by using crown ether 15C5 dissolved in chloroform as a blank, these wave lengths are used for absorbance measurements which belong to ion pair association complex extracted to organic phase. On the other hand prepared calibrationcurve for each ion according to its spectrophotometric method.Results demonstrated that the optimum concentration of HCl in aqueous phase (2M) was necessary to the formation and stability of Lead chloroanion complex (PbCl4 =, PbCl3 - ) as well as effect to increase stability of liquid ion exchanger [Na15C5]+;Cl - in organic phase by common ion effect. While NaCl optimum concentration for Pb(II) was (0.4M) and for Al(III) (1.2M), NaCl contributed in the formation of Aluminium chloroanion complex AlCl4 - also it contributed in the formation of liquid anion exchanger [Na 15C5]+;Cl - in the organic phase. Liquid ion exchange was based on thermodynamic equilibrium and metal ion concentration in aqueous phase which was one of thermodynamic value which rolled the equilibrium of extraction process where this concentration of metal ion is converted to chloroanion complex and participates in the liquid ion exchange method with Cl - which is found on liquid ion exchanger. The optimum concentration of Pb(II) was (50μg/5mL) and for Al(III) was (100μg/5mL).Solvent extraction was indirect method depended on thermodynamic and kinetic laws so we determined optimum shaking time of the two immiscible phases, the results showed that (10min.) was the optimum shaking time for each ions. Stoichiometry of ion pair association complexes was demonstrated by two methods : slope analysis method and slope ratio method, the results clarified the extracted species for both ions were [1 : 1]+;anion - [metal : 15C5]+; anion - the most probable structure of Pb(II) complexes were [Na15C5]+; PbCl3 - or [Na15C5]+; HPbCl4 - and for Al(III) was [Na15C5]+; AlCl4 - . Other study was effect of the structure and polarity of organic solvents, the results showed that chloroform was the best solvent for both ions and there isn’t any linear relation between dielectric constant for organic solvent used and distribution ratio (D) values and there was an effect of organic solvent structure giving increase in distribution ratio (D) and absorbance values led to rising extraction efficiency by formation of contact ion pair or solvent separated ion pair.Thermodynamic study showed the liquid ion exchange was endothermic reaction and for both ions, from the high values of entropy reflects the reaction was entropic in region. Also study the effect of agreement between crown ether cavity size and alkali, alkaline earth metal cations, the results showed the major effect was for agreement, which gave higher distribution ratio (D) and absorbance values. As well study the interferences effect of some anions, all this anions gave interferences and cause reduces of distribution ratio (D) and absorbance values depending on anion nature and structure. Whilst electrolyte salts gave an increase in distribution ratio (D) and absorbance values where electrolyte salts destroyed the hydration shell of metal ion and enhancement of the chance to form chloroanion complex of metal ions and rising extraction efficiency. Methanol presence in aqueous phase increase distribution ratio (D) and absorbance values for both ions due to methanol decline water polarity and destroyed the hydration shell of metalions.Cryptands C221 and C222 were used as organic reagent to compare extraction efficiency with using of crown ether 15C5 as organic reagent firstly determined the maximum absorbance wave length for ion pair association complex extracted to the organic phase which was for Pb(II) λmax=277nm with C221 and λmax=276nm with C222, for Al(III) λmax=281nm with C221 and λmax=275nm with C222. Optimum concentration of HCl for Pb(II) was (0.8M) with C221 and (1.2M) with C222. And optimum concentration of KCl (0.4M) for Pb(II) with C221 and C222 and for Al(III) (0.8M) with C221 and (0.5M) with C222. While metal ion optimum concentration for Pb(II) was (80μg/5mL) with C221 and (70μg/5mL) with C222 and for Al(III) (50μg/5mL) with C221 and (40μg/5mL) with C222. Optimum shaking time was 15min. for Pb(II) and Al(III) with both cryptands C221 and C222.Stoichiometry by using two spectrophotometric method slope analysis method and slope ratio method showed that extracted species were [1 : 1]+;anion - [metal : Cryp.]+; anion - for Pb(II) and Al(III) with both cryptands C221 and C222. In addition to study the effect of agreement between cryptands cage size and alkali, alkaline earth metal cations, the results showed the major effect was for agreement, which gave higher distribution ratio (D) and absorbance values. The distribution ratio (D) and absorbance values by usingcryptands were higher than those obtained by using crown ether due to cryptate effect.For spectrophotometric determination of elements study in different environmental and vital samples prepared calibration curves for each ions at optimum conditions by using 15C5 at optimum condition for liquid ion exchange method of each metal ion, samples solution prepared according to wet digestion method and spectrophotometric determination were carried out optimum condition for liquid ion exchange method of each metal ion. By return to calibration curves determined Lead and Aluminium amount in these samples.

الاستخلاص والتقدير الطيفي لايونات Zn (II) وLa (III) وCe (III) باستعمال كواشف عضويه جديدة في نماذج تحليله مختلفة == Extraction and Spectrophotometric determination of Zn(II),La(III) and Ce(III) Ions using New Organic Reagent in Different analytical Samples

Author name: سحر عقيل حسين الاعسم
Supervisor name: رافع قدوري الكبيسي | تغريد هاشم النور
General topic: Chemistry
Specific topic: Chemistry
Degree: Doctorate
University: University of Baghdad
Language: English
University location: Baghdad
First pages:
Abstract: Three organic reagents were synthesized 2 - [4 - bromo - 3,5 - diethyl phenyl azo] - 4,5diphenylimidazole(BDPI) , 2 - [(4 - Benzyloxy phenyl)azo] - 5 - nitro - 4 - phenyl imidazol(BANI),4 - [N - (5 - methylisoxazol - 3 - yl) benzene sulfonamide azo] - 1 - Naphthol (AMBN) ,which are utilized for separation , extraction and spectrophotometric determination Zinc(II) ,Lanthanum(III) and Cerium(III) as cations according to liquid - liquid extraction method , depending on the measurement of absorption of ion pair complex extracted at maximum wavelength (λmax )and calculation distribution ratio (D).This study involves limitation of optimum conditions for complex formation as well extraction as pH. as well the experiment showes optimum pH for extraction Zn(II) with [(BDPI), (BANI),(AMBN)] (pH=8,9,9) respectively but for La(III) was (pH=11,10,10) with [(BANI) ,(BDPI), (AMBN)] respectively as well (pH=9,9,8) for Ce(III) with [(AMBN)(BDPI)(BANI)].The study about metal ions concentration effect on extraction methods illustrates 50μg/5mL Zn2+ appropriate concentration obtaining higher absorbance for ion pair complex extracted to organic solution as well higher distribution ratio (D) with all organic reagents , and for La3+ was 80μg/5mL with all organic reagents also 100μg/5mL Ce3+ all organic reagents.Kinetic energy has significant role in extraction. method according to liquid - liquid extraction , as well the study show effect of shaking time of two layers on qualify of extracted and explains 10 min which were appropriate shaking time for Zn(II), La(III) and Ce(III) with all organic reagents to give higher distribution ratio (D) as well higher absorbance of ion pair complex extracted to organic phase.Stoichiometry study about definition is more possible structure of ion pair complex extracted by the performance of four spectrophotometric method for extraction Zn2+ , La3+ and Ce3+ by [(BDPI), (BANI),(AMBN)] under optimum conditions as well all experiments show the structure of ion pair complex extracted was [1 : 1] [M : L][Zn (AMBN ) ] 1+ ;Cl - [Zn (BANI) ] 2+ ;2Cl - [Zn(BDPI )]2+ ;2Cl - [La(BDPI)]+3; 3NO3 - [La(AMBN)]+2; 2NO3 - [La (BANI)] 3+;3NO3 - [Ce(BANI) ]3+ ; 3NO3 - [Ce(BDPI) ]3+ ; 3NO3 - [Ce(AMBN )]2+ ;2NO3 - Organic solvent effect study shows there are not any linear relation between distribution ratio (D) and dielectric constant (ε) of organic solvents that means there is not any impact for polity of organic solvent on extraction method however there is an impact for organic solvent structure which is participation in the structure of ion pair complex extracted by formation loose ion pair or tight ion pair, and experiment result demonstrate organic solvent (CH3Cl) was the better organic solvent in extraction Zn(II) ,La(III) and Ce(III) by all organic reagents.Thermodynamic study involves temperature impact on extraction efficiency the experimental results explain the reactions were exothermic for Zn(II) ,La(III) and Ce(III) with all organic reagents [(BDPI), (BANI),(AMBN)] after calculating thermodynamic data ΔHex and ΔGex , ΔSex appear entropy values which were high that means complexation reaction is entropic in region .This study is about effect of methanol in aqueous phase on extraction method of metal in aqueous phase on extraction method of metal cation Zn2+, La3+ and Ce3+ by [(BDPI), (BANI),(AMBN)] the results show foundation of methanol in aqueous phase with metal cations obtaining enhancement in D as well this increase continues to reach optimum concentration of methanol next this value distribution ratio (D) decreases .The study of electrolytic salts is about extraction method of Zn2+ , La3+ and Ce3+ by [(BDPI), (BANI),(AMBN)] to clarify metal cations of firstgroup which gave high absorbance and distribution ratio D because they have high affinities towards the water withdrawing in sequence of Li+ > Na+ >K+. Since the ionic radius of lithium is very small and has high charge density, it has a hydration shell with more thickness than Na and K, thereby it has high capability for withdrawing of more water molecules from the hydration shell of metal. This case proved that the extraction efficiency increases with the decrease of ionic radius. Whilst for the salts which contain ions of second group like Mg and Ca, the extraction efficiency was found to be relatively less than that incase of first group of the electrolytic salts. This is because the thickness of hydration shell is less than of the first group ions despite the fact that the higher charge density on the second group ionThe study about synergism is by using (TBP) and (MBK) in the extraction the experimental results show TBP and MIBK which gave increase in distribution ratio (D) through participate molecular of these solvents in the structure of ion pair complex extracted install of water molecular in coordination shell of metal cation and the results show there is one molecular of [TBP or MIBK] participate in ion pair complex extractionThis study involved using organic reagent [(BDPI), (BANI),(AMBN)] for spectrophotometric determination of Zn2+ , La3+ and Ce3+ in different environmental ,vital and waste electronic equipment samples

تحضير وتشخيص ودراسة الفعالية البايولوجية لبعض قواعد شف والاوكسازيبينات والايميدات الجديدة المشتقة من الهيدرازايد لثنائي انهدريد حامض البايرومليتاميك

Author name: جنان محسن عبد الرسول
Supervisor name: عماد تقي علي
General topic: Chemistry
Specific topic: Chemistry
Degree: Master
University: University of Baghdad
Language: English
University location: Baghdad
First pages:

تحضي وتشخيص ودراسة الخواص الكهربائية لمتراكب بوليمري يحوي مواد نانوية واستخدامها كمواد ذكية

Author name: ازهار فاروق عبد الزهرة
Supervisor name: انتصار عليوي
General topic: Chemistry
Specific topic: Chemistry
Degree: Master
University: University of Baghdad
Language: English
University location: Baghdad
First pages:

استخلاص ايونات العناصر الرصاص والكادميوم والزك والرينيوم بتقنية الغشاء السائل باستخدام المركبات الحلقية العيانية == Extraction of Lead, Cadmium, Zinc and Rhenium ions by Liquid Membrane Technique Using Macrocyclic Compounds

Author name: يسرى عمران موسى
Supervisor name: مؤيد كاصد جلهوم | جميل موسى ضباب
General topic: Chemistry
Specific topic: Chemistry
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: Liquid - Liquid extraction of metal salts (MA) by Crown compounds(L) to less - polar diluents such as Chloroform,1,2 - dichloroethane and Carbon tetrachloride have previously been studied by considering an ion - pair formation between a complex metal ion ML+ and a pairing ion A - in water (W) and a distribution of the formed ion pairs MLA in the diluents. Liquid membrane transport is a new separation process as a modification of solvent extraction the simultaneous extraction and stripping operation is very attractive ,because the solute of interest can move from a high concentration solution to a low concentration solution with a suitable crown ether derivatives which have been widely used as suitable neutral carriers for the selective and efficient transportation of cations through liquid membranes.Liquid membranes have shown a great potential in this way especially in cases where metal concentration are relatively low and other techniques cannot be applied efficiently. Cation and anion transport by neutral macrocycles in liquid membranes is often diffusion limited extraction constants, permeability, flux coefficients and an aqueous phase macrocycle - cation and anion - cation interaction constants and membrane geometry are the parameters in the diffusion limited transport equation.The transport kinetic was analyzed by means of a kinetic model involving two consecutive irreversible first - order reactions. The rate constants of extraction stripping reactions and the transport rate fluxes of Pb2+, Cd2+, Zn2+ and ReO4 - through the bulk liquid membrane were determined for all experimental conditions studied.The present thesis reports the first application in Iraq ,by using macro cyclic compounds (crown ethers) as carrier in Liquid Membrane techniques as well as the matching size model of crown ethers with various ionic radius of metal ions, from evaluation of dibenzo 18 - Crown - 6, dicyclohexyl 18 - crown - 6 Kryptofix 2.2.2 and diaza 18 - crowwn - 6 as carrier molecule and study theXVIItransport behavior of Pb2+, Cd2+, Zn2+ and ReO4 - across (1,2 - dichloroethane, chloroform and carbon tetrachloride) as Bulk Liquid Membrane.In the present work transport experiments were performed across Bulk Liquid Membranes(BLMs) using U - Shape Setup from source phase which consist of 10 - 3M of metal ions dissolved in 10 mL of double distilled deionized water at pH=5.2 - 5.5 for Pb2+, Cd2+, Zn2+ metal cations and at pH= 6.2 - 6.5 for ReO4 - metal anion to receiving phase consist of 10ml of double distilled deionized water at pH= 3.2 - 3.7 across organic phase consisting 0.001M of dibenzo18 - crown - 6, dicyclohexyl 18 - crown - 6, Krypto fix2.2.2 and 1,10 - diaza 18 - crown - 6 were dissolve in 1,2 - dichloroethane, chloroform and carbon tetrachloride.The effects of operating conditions such as stirring speed, type of carrier, type of solvent, temperature and pH were studied. The results of permeability and flux coefficients show that the transport rate of metal ions can be enhanced by increasing stirring speed but not higher than l00 rpm using dicyclohexyl 18 - crwon - 6 as carrier due to the presence of donating group (cyclohexyl group) , It is well known that transition metal ions form stable complexes with ligands having N or S donors, which are hard bases ,but the affinities of crown ethers to soft transition metal ions are rather weak because crown ethers have hard O donors. In addition ,because of the large solvation energy of transition metal ions, crown ethers rarely form complexes with transition metal ions.1,2 - dichloro ethane is the best solvent due to its moderate polarity constant and the favorable temperature of the reaction is 30C 1 according to Arrhenius equation. There is no trend observed in the PH effect because the type of carriers is a neutral extract ant molecule which is less interaction than basic and acidic extractants with concentration of hydronium ion in solution. Also, the selectivity and efficiency of transport rate of metal ions matching with the values of its hydration

تحضير وتشخيص ليكاندات قواعد شف جديدة ومعقداتها مع بعض الايونات الفلزية وتقدير فعاليتها البكتيرية == Synthesis and characterisation of new Schiff bases ligands and their complexes with some metal ions and evaluation of their bacterial activi

Author name: ورود علي جعفر الساعدي
Supervisor name: ساجد محمود لطيف | باسمه محسن سرحان
General topic: Chemistry
Specific topic: Chemistry
Degree: Doctorate
University: University of Baghdad
Language: English
University location: Baghdad
First pages:
Abstract: تضمن العمل تحضير ثلاث ليكاندات (H2L1, H2L2 and H2L3) من نوع ( (N2 والتي استعملت فيما بعد لتحضير المعقدات وهذه الليكاندات هي : 2 - (4 - (carboxymethyleneamino) - 1,5 - dimethyl - 2 - phenyl - 1H - pyrazol - 3(2H) - ylideneamino)propanoic acid(H2L1), 2 - ((E) - 3 - (2 - hydroxyphenylimino) - 1,5 - dimethyl - 2 - phenyl - 2,3 - dihydro - 1H - pyrazol - 4 - ylimino)acetic acid(H2L2) and 2 - ((E) - 4 - ((Z) - 2 - hydroxy - 1,2 - diphenylethylideneamino) - 1,5 - dimethyl - 2 - phenyl - 1H - pyrazol - 3(2H) - ylideneamino)propanoic acid(H2L3).تم تحضير هذه الليكاندات من مفاعله مكافئ واحد من 2 - (1,5 - dimethyl - 3 - oxo - 2 - phenyl - 2,3 - dihydro - 1H - pyrazol - 4 - ylimino)acetic acid(المشتق الاول) مع مكافئ واحد من حامض البروبيونك لليكاند الاول (H2L1) ومن مفاعله نفس المشتق الاول مع 2 - امينو فينول لتحضير الليكاند الثاني (H2L2) اما الليكاند الثالث (H2L3) فقد تم تحضيره من مفاعله مكافئ واحد من (Z) - 4 - (2 - hydroxy - 1,2 - diphenylethylideneamino) - 1,5 - dimethyl - 2 - phenyl - 1H - pyrazol - 3(2H) - one مع مكافئ واحد من البنزوين.(جميع التفاعلات اجريت باستخدام الايثانول كمذيب والتصعيد العكسي ولمدة 7 ساعات لليكاندين الاول والثاني و5 ساعات لليكاند الثالث ). تم تشخيص الليكاندات باستخدام التحليل الدقيق للعناصر واطياف الاشعة تحت الحمراء وفوق البنفسجية - المرئيه وطيف الرنين النووي المغناطيسي مع درجة الانصهار. كما تضمن البحث تحضير سلسلة من المعقدات وذلك من خلال مفاعلة الليكاند مع املاح : الفنادايل II والمنغنيز II والكوبلت II والنيكل II والنحاس II والخارصين II والكادميوم II والزئبق II. وباستخدام الايثانول كوسط تفاعل. شخصت هذه المعقدات باستخدام التحليل الدقيق للعناصر والامتصاص الذري اللهبي(A.A) واطياف الاشعة تحت الحمراء وفوق البنفسجية - المرئية وقياسات التوصيلة الكهربائية ومحتوى الكلور مع درجة الانصهار .حيث اقترحت الصيغ الكيميائية العامة التالية : [M(L)2(X)(Y)]n حيث : L=H2L1 M=VO)II), X=0, Y=OSO3 - 2, n=0 M=Mn(II), X=H2O, Y=H2O, n=+2 M= Co(II),Ni(II),Cu(II),Zn(II),Hg(II), X=H2O, Y=Cl, n=+1 M=Cd(II), X=Cl, Y=Cl, n=0 L=H2L2M= VO(II), X=0, Y=OSO3 - 2, n=0M=Ni(II),Cu(II), X= H2O, Y=Cl, n=+1M= Mn(II),Co(II),Zn(II),Cd(II),Hg(II), X=Cl, Y=Cl, n=0L=H2L3M=VO(II), X=0, Y=OSO3 - 2, n=0M=Co(II),Cd(II), X=H2O, Y=Cl, n=+1M=Mn(II),Ni(II),Cu(II),Zn(II), X=H2O, Y=H2O, n=+2M=Hg(II), X=Cl, Y= Cl , n= 0 اظهرت اطياف الاشعة تحت الحمراء ان الليكاندات متعدده السن تسلك بصفتها ثنائيه التناسق. كما استخدمت اطياف الاشعة فوق البنفسجية - المرئية للمعقدات في دراسة التوزيع الفراغي لليكاند مع ايونات الفلزات . وباستخدام المعلومات المستحصلة من التحليل الدقيق للعناصر والامتصاص الذري والتوصيلية الكهربائية ومحتوى الكلور بالاضافة الى القياسات الطيفيــة [ الاشعة تحت الحمراء وفوق البنفسجية - المرئية], اقترح ان الشكل الفراغي هو ثماني السطوح لجميع المعقدات. | This work covers the synthesis of three ligands (H2L1, H2L2 and H2L3) type (N2) capable to form structures upon complexation with metal ions; namely 2 - (4 - (carboxymethyleneamino) - 1,5 - dimethyl - 2 - phenyl - 1H - pyrazol - 3(2H) - ylideneamino)propanoic acid(H2L1), 2 - ((E) - 3 - (2 - hydroxyphenylimino) - 1,5 - dimethyl - 2 - phenyl - 2,3 - dihydro - 1H - pyrazol - 4 - ylimino)acetic acid(H2L2) and 2 - ((E) - 4 - ((Z) - 2 - hydroxy - 1,2 - diphenylethylideneamino) - 1,5 - dimethyl - 2 - phenyl - 1H - pyrazol - 3(2H) - ylideneamino)propanoic acid(H2L3). These ligands were synthesized from the reaction of one equivalent of 2 - (1,5 - dimethyl - 3 - oxo - 2 - phenyl - 2,3 - dihydro - 1H - pyrazol - 4 - ylimino)acetic acid (Precursor I) with one equivalent of 2 - aminopropionic acid for [H2L1], one equivalent of 2 - (1,5 - dimethyl - 3 - oxo - 2 - phenyl - 2,3 - dihydro - 1H - pyrazol - 4 - ylimino)acetic acid (Precursor I) with one equivalent of 2 - aminophenol for [H2L2] and one equivalent of (Z) - 4 - (2 - hydroxy - 1,2 - diphenylethylideneamino) - 1,5 - dimethyl - 2 - phenyl - 1H - pyrazol - 3(2H) - one (Precursor II) with one equivalent of benzoin for [H2L3]. The reaction was carried out in ethanol (as a solvent), at reflux (7hrs for H2L1, H2L2 and 5hrs for H2L3). The ligands (H2L1, H2L2 and H2L3) were characterised by elemental microanalysis (C.H.N), (I.R), (U.V), 1H,13C NMR, along with melting point measurements.The ligands were reacted with metal ions [VOII, MnII, CoII, NiII, CuII, ZnII, CdII, and HgII ] at reflux in ethanol to give the complexes of the general formula : [M(L)2(X)(Y)]n, [Where; L= H2L1M=VO(II), X=0, Y=OSO3, n=0M=Mn(II), X=H2O, Y=H2O, n=+2M= Co(II),Ni(II),Cu(II),Zn(II),Hg(II), X=H2O, Y=Cl, n=+1M=Cd(II), X=Cl, Y=Cl, n=0L= H2L2M= VO(II), X=0, Y=OSO3, n=0M=Ni(II),Cu(II), X= H2O, Y=Cl, n=+1M= Mn(II),Co(II),Zn(II),Cd(II),Hg(II), X=Cl, Y=Cl, n=0L= H2L3M=VO(II), X=0, Y=OSO3, n=0M=Co(II),Cd(II), X=H2O, Y=Cl, n=+1M=Mn(II),Ni(II),Cu(II),Zn(II), X=H2O, Y=H2O, n=+2M=Hg(II), X=Cl, Y= Cl , n= 0These complexes were characterised by elemental microanalysis (C.H.N), (A.A), chloride contents, [I.R, (U.V - Vis) spectroscopy], along with conductivity and melting point measurements.The (I.R) spectra of the complexes showed that, the potentially polydentate ligand acts as bicoordinate.The (U.V - Vis) spectra of the ligand and complexes were studied in order to elucidate the spatial arrangements of the ligand around the metal ions. The conductance measurements of the complexes in ethanol, and chloride contents revealed that, some of the complexes are ionic while others are non - electrolyte.On the basis of elemental microanalysis, conductivity and chloride contents measurements, [I.R, U.V. - Vis spectroscopies] are suggested an octahedral geometry for all complexes

اقطاب كرافيت لاغشية متعدد كلوريد الفاينيل جديدة معتمدة على بوليمرات الطبعة الجزيئية للتعيين الجهدي الانتقالي لعقاري الرسبيريدون والكلبينكلامايد

Author name: همسة منعم ياسين
Supervisor name: نجوى اسحق عبد الله
General topic: Chemistry
Specific topic: Chemistry
Degree: Doctorate
University: University of Baghdad
Language: English
University location: Baghdad
First pages:
Abstract: The increasing demand for rugged and robust sensors for the determination of drugs in pharmaceutical formulations and biological samples lead to the development of a new generation of ion selective membrane electrodes depended on molecular imprinting technique.Four graphite coated electrodes of polymers imprinted with two drugs namely Risperidone (Ris.) and Glibenclamide (Glb.) were constructed for the selective determination in their pure forms and pharmaceutical formulations.The study comprised two parts : The first part deals with the synthesis of molecularly imprinting polymers (MIP) and non - imprinting polymers (NIP) by bulk polymerization method using Risperidone and Glibenclamide as templates, acrylic acid (AA) and acrylamide (AAm) as functional monomers, ethylene glycol dimethacrylate (EGDMA) as a cross linker and benzoyl peroxide (BPO) as an initiator.The optimal ratios of (template : monomer : cross linker) which were used in the synthesis of the imprinted polymers were found to be 1 : 4 : 20 for Risperidone MIPs and 1 : 80 : 100 for Glibenclamide MIPs.The second part concerns with the designing of potentiometric sensors for Risperidone and Glibenclamide. The molecularly imprinted and non - imprinted membranes were prepared by dispersing the MIP and NIP particles in di - octyl phthalate (DOP) and di - butyl phthalate (DBP) plasticizers as solvent mediators and then embedded in poly vinyl chloride (PVC) matrix. The mixture was coated as a membrane onto a graphite electrode.The characteristics of the prepared electrodes according to the IUPAC recommendations including slope, linear range, detection limit, life time, response time, working pH range and selectivity were investigated by construction of a calibration curve for each electrode.Ris - MIP electrodes based on (AA) and (AAm) as functional monomers showed a near Nernstian and Nernstian slopes of (55.2and 59.0) mV/decade with a linear concentration range between (1.0×10 - 6 - 1.0×10 - 2) M and (5.0×10 - 7 - 1.0×10 - 2) M, and detection limits (3.3×10 - 7and 2.0×10 - 7) M respectively. The responses of the electrodes were stable in a pH range (4 - 8). The electrodes can be used for (7 and 13) weeks respectively without any divergence in the potential.Ris - MIP membrane based on (AAm) as a monomer was prepared using two kinds of plasticizers, DOP and DBP. The one using DOP exhibited better characteristics comparing with that based on DBP which showed a lower response with a slope of 47.9mV/decade and shorter life time of 3 weeks.On the other hand (Glb.) MIP based electrodes using (AA) and (AAm) as functional monomers showed a near Nernstian responses of ( - 51.5and - 57.7) mV/decade with a linear working range of (1.0×10 - 4 - 1.0×10 - 2) M and (1.0×10 - 5 - 1.0×10 - 3) M, and detection limits of (1.0×10 - 4 and 1.0×10 - 5) M respectively. The life time of these electrodes were (1and 6) weeks respectively. The proposed electrodes could be used in the pH range (2 - 4) with a stable response.Two plasticizers; DOP and DBP were tested during the preparation of Glb - MIP membranes based on (AAm) as a monomer. The (Glb.) membrane using DOP plasticizer exhibited better specifications than that based on DBP which showed a lower response with a slope of - 53.4mV/decade and shorter life time 3 weeks.All of the proposed Ris. - MIP and Glb - MIP sensors have a short response time of ≤ 30 seconds and revealed good selectivity for (Ris.) and (Glb.) over a wide variety of species.The validation of the proposed potentiometric method utilizing these new MIPs electrodes for (Ris.) and (Glb.) was achieved by accuracy and precision test in terms of inter - day (repeated over 3 days) and intra - day (repeated independently three times a day) measurements and calculating RE% and RSD% which is found less than (4 and 2.3046) for (Ris). and less than (4 and 2.3225) for (Glb.) respectively.The most effective electrodes; (Ris.) MIP and (Glb.) MIP based on (AAm) as a functional monomer and DOP as a plasticizer were used in the determination of Ris. and Glb. concentrations in their pharmaceutical formulations (tablets and caplets) obtained from different companies by direct, standard addition and multiple standard addition methods. A spectrophotometric method was also applied as a comparative one. The multiple standard addition method (M.S.A) has exhibited better results over the two other appliedThe recognition binding sites of the four synthesized polymers were studied by applying the rebinding procedure and plotting the adsorption isotherms of each polymer to find out Qmax. The equilibrium dissociation constant was calculated from the slope and the apparent maximum number of binding sites from the y - intercept in the linear Scatchard plot of Q/Cfree vs. Q

تحضير بعض الفورمازنات والثايازوليدينونات الجديدة ودراسة فعالية بعض المركبات المحضرة في خفض سكر الدم

Author name: هبة محمد داغر راشد
Supervisor name: حيدر عباس مهدي | كريم سالم عباس
General topic: Chemistry
Specific topic: Chemistry
Degree: Master
Language: English
University location: Dhi Qar
First pages:
Abstract: The thesis consists of three chapters. The first chapter is concerned with the introduction described the chemistry of Schiff bases , formazans and thiazolidinones compounds including importance , applications , synthesis and literature reviews.The second chapter describes the chemicals and solvents which were used in the synthesis of the new Schiff bases, formazans and thiazolidinones derivatives, physical measurements , synthesis methods of compounds and evaluation of anti - hyperglycemic activity. The formazans compounds[4a - 4h] were prepared by reacting diazonium salts amines[3a - 3c] with the appropriate Schiff bases[2a - 2h].Schiff bases themselves are synthesized by the condensation of different primary amines with various aromaticaldehydes. The thiazolidinones derivatives[5c,5e,5i,5j,5k] are synthesized by condensing thioglycolic acid with various Schiff bases[2a - 2h]. All the structures prepared [2a - 2k] , [4a - 4h] and [2c, 2e ,2i ,2j , 2k] were shown in scheme(1), and characterized on the basis of the spectral data : IR, Mass, 1H and 13C NMR. The third chapter deals with , the results and discussion. The IR spectra show an important absorption band at (1558 - 1689)cm - 1 attributed to azomethine (C=N) for Schiff bases, the IR spectra showed important absorption band at (1681 - 1597 )cm - 1 attributed to azomethine (C=N) and (1465 - 1558) cm - 1 to ( - N=N - ) for formazans derivatives. Also, the IR spectra show an important absorption band at (1689 - 1658)cm - 1 attributed to the thiazolidinones ring . The 1H - NMR spectra of formazans show aromatic protons at the range (7.07 - 8.49 )ppm and pyridyl protons as downfield signal at (8.22 - 9.15 ) hydrazide signal at 11 ppm. The 1H - NMR of thiazolidinones exhibit new signals attributed to - CH2 and - CH of thiazolidnones ring at δ (4.52 - 4.71) and (5.70 - 5.81 ) ppm, respectively .13C - NMR spectra of formazans exhibit that the a signal at 156 - 168 ppm (amide carbonyl) , thiazolidinones show a signal at (207.35 - 208 .60) ppm attributed to the C=O ring thiazolidinones.The mass spectra of the formazans compounds [4d ,4e, 4g , 4h] show a molecular ion peak. M+(354 .401 . 516. 498) m/z corresponding to the target compounds. Also, mass spectra of thiazolidinones compounds [5e, 5i] show molecular ion peak. M+ (356 , 369 ) m/z corresponding to the target compounds .This study is also concerned with anti - hyperglycemic activity ,and male mice (Mus musculus Balb/c ) weighing (25 - 35)gm were used for the study of the effects of formazan compound [4e] and thiazolidinone compound [5e] on the blood glucose levels of the animals.Animals are divided into seven different groups, Group (A) : negative control (normal) that is only treated with distilled water (D.W). Group (B) : positive control that is treated with alloxan (125mg/kg) B.W. only to induce diabetes. Group (C) : that is only treated with (DMSO) only. Group (D) : alloxan - induced diabetes mice that are treated with (75 mg/kg) of formazan derivative [4e]. Group (E) : alloxan - induced diabetes mice that are treated with (150 mg/kg) of formazan derivative [4e]. Group (F) : injected alloxan and thiazolidinone [5e] (75 mg/kg). Group (G) : injected alloxan and compound thiazolidinone [5e] (150 mg/kg) .The mice were treated for two weeks and used Colorimetric to Determination of serum Glucose Level by spectrophotometer. The results how that the determination of serum glucose concentration is in males mice groups (A , B , C , D, E , F and G ).A significant decrease can be observed among ( D, E, F and G) groups as compared with group (A) after treatment (2 week) with (75 mg /kg) and (150 mg /kg ) respectively of formazans [4e] and also treatment with(75 mg /kg) and (150 mg /kg ) from thiazolidinone [5e] . while groups (A , C ) do

تحضير والدراسة التركيبيه والفعالية البايولوجية لمعقدات بعض العناصر الانتقالية لعض مشتقات ثلاثي الثايوكاربانيت الجديدة == Synthesis,Structural ,AndAnti bacterial Activity Studiesof SomeTransitionMetal Complexesof New SomeTrithiocarbonateDerivatives

Author name: هدى قاسم جبر
Supervisor name: محاسن فيصل الياس | اياد حمزة جاسم
General topic: Chemistry
Specific topic: Chemistry
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: The new ligands have been prepared in this work (potassium 2 - carbomethoxy amino 5 - 5trithiocarbonate 1,3,4 - thiadiazole ) (LI) was prepared from 2 - carbomethoxy amino - 5 - mercapto 1,3,4 - thiadiazole with CS2 in alkali media , while the second ligand was prepared from 2 - N(4 - N,N - dimethylamino benzyliden) - 5 - mercapto 1,3,4 - thiadiazole with CS2 and in alkali media to obtain potassium 2 - N( 4 - N,N - dimethylaminobenzyliden )4 - trithiocarbonate 1,3,4 - thiadiazole ( LII).The products were isolated and characterized by appropriate physical measurement , vibrational and electronic spectroscopy .The new ligands have been used to prepare a number of new complexes with the selected metal ions Cd(II), Cu(II) , Ni(II) , Co(II) , Fe(III) , and Mn(II) . These complexes were studied and characterized using FT,IR, UV - Vis. spectra, molar conductivity, magnetic susceptibility , melting point , and atomic absorption measurement. We concluded that the [Cu2L2Cl2(H2O)2]. 3C2H5OH, [Ni L2 Cl2].2H2O, [Fe2L2(OH) 2 Cl4] .4H2O and [Mn L2 (H2O)2] . 2H2O have octahedral geometry while [Cd L2]. 3C2H5OH and [Co L H2O Cl ].3H2O have tetrahedral geometry for the complexes of LI. While octahedral geometry for the complexes of LII for the [Cu L2 (H2O)4 Cl2].2H2O , [Mn L2 (H2O) (OAc)].3 H2O [Ni L2 (H2O)2 Cl2].C2H5OH , [Fe2 L4 (OH) 2].5H2O and [Co2L2(H2O)4Cl2]. 2.5 C2H5OH ,But [Cd L2]. 4C2H5OH have tetrahedral geometryDifferent bonding and structural behavior were revealed through the study of the coordination chemistry of the metal complexes of the new ligands.The nature of bonding between the metal ion and the donor atom of the ligands were demonstrated through the calculated Racah parameter and the other ligand field parameters,which were calculated using the suitable Tanaba - sugano diagram.The antibacterial activity for the ligands and their metal complexes were studied against two selected microorganisms pseudomonas earuginsa and staphylococcus aureus using ( 10mM ) and ( 5mM ) concentration in nutrient agar medium . The results were showed a great enhancement of activity of some complexes relative to that of their respective ligands , these were attributed to the synergetic effect between the metal ion and the ligand , in addition to the differencein the structural varieties

استخلاص وفصل بعض ايونات اللانثانات باستخدام متعدد الايثر ثنائي بنزو - 18 - كراون - 6 - من المحاليل المائية == Extraction and Seperation of Some Lanthanoide Ions by Polydibenzo - 18 - Crown - 6 - from Aqueous Solutions

Author name: هادي حسن جاسم الشمري
Supervisor name: مؤيد كاصد جلهوم | نجاة جواد العبيدي
General topic: Chemistry
Specific topic: Chemistry
Degree: Doctorate
Language: Arabic
University location: Baghdad
First pages:
Abstract: كان الهدف من البحث هو اعتماد انتقائية متعدد الايثر التاجي (PDB18C6) للايونات الموجبة في استخلاص بعض ايونات اللنثنيدات من محاليلها او فصلها عن بعض في حالات وجودها في المزيج وكذلك فصلها وتعيين نسبها في بعض خامات (Bastnaesite Ores) وشملت الدراسة بالاضافة الى اللنثنيدات عنصري السكانديوم والايتريوم للتشابه الكبير بين خواصهما وخواص اللنثنيدات حيث تصنف هذه العناصر مع اللنثنيدات ويطلق عليها تسمية (Lanthanoides) . العناصر التي درست كانت كالاتي : Sc) ، Y ، La ، Ce ، Pr ، Nd ، Eu ، Gd ، Dy ، Tm ، (Lu . كما تم تسليط الضوء على طبيعة عمليات الاستخلاص والعوامل المؤثرة عليها مثل : ا. زمن الاستخلاص .ب. قيمة الدالة الحامضية الـ (pH) المحلول .جـ. تاثير درجة الحرارة وتعيين الدوال الثرموديناميكية Gex) ، Hex ، (Sex .د. استنتاج تركيب المعقدات المستخلصة باستخدام طريقة تحليل الميل .ا. استخلاص اللنثنيدات : استخلصت جميع ايونات اللنثنيدات بالاضافة الى السكانديوم والايتريوم بوساطة بوليمر الكراون ايثر (PDB18C6) في اوساط حامضية تراوحت قيمة الدالة الحامضية لها ما بين (pH=3  5) 1. دراسة تاثير الدالة الحامضية (pH) المحلول : تم استخلاص الايونات المذكورة باستخدام قيم مختلفة من الدالة الحامضية وتم تحديد افضل قيمة مناسبة لعملية الاستخلاص لكل نوع من الايونات وكانت كالاتي : La Ce Pr Nd Eu Gd Dy Tm Lu Sc Y5.0 4.8 4.8 4.5 4.0 3.8 3.7 3.4 3.0 2.0 3.6لقد وجد عمليا ان قيمة الدالة الحامضية للمحلول (pH) تزداد كلما ازداد حجم الايون او نصف القطر .2. دراسة تاثير عامل الزمن : وجد ان هناك علاقة طردية بين فترة عملية الرج لاستخلاص كل ايون ونسب الاستخلاص متمثلة بقيم معامل التوزيع (kD) والنسبة المئوية للاستخلاص (E%) . حيث كلما تزداد الفترة الزمنية لعملية الاستخلاص ازدادت قيم كل من (kD) و(E%) حيث يصل الاستخلاص الى حالة الاتزان عندها يثبت تقريبا تركيز الايون المستخلص في الوسط العضوي (Corg) وتركيز الايون المتبقي ( غير المستخلص ) في المحلول المائي (Caq) . وان اعلى قيمة استخلاص لجميع الايونات كانت عند فترة الوصول الـى حالـة الاتزان . وان عملية الاستخلاص لجميع الايونات التي تمت دراستها قد وصلت الـى حالة التـوازن بعد (50 min) من عملية الرج باستثناء ايوني اللانثانيوم وحصل التوازن بعـد (60 min) والسكانديوم بعد (40 min) . علما ان فترة عملية الرج لجميـع الايونات تقريبا تراوحت ما بين (10 - 90 min) . 3. دراسة تاثير تركيز الحامض (HNO3) : كما درس تاثير تركيز الحامض (HNO3) خارج نطاق الـ (pH) على استخلاص اللنثنيدات باستخدام تراكيز مختلفة من الوسط الحامضي تراوحت ما بين (0.17.0 M) وقـد اثر سلبا تركيز الحامض على عملية الاستخلاص فكلما ازداد تركيـز الحامض بالمحلول انخفضت عملية الاستخلاص متمثلة بقيم (kD) و(E%) واعتقد ان السبب يرجع الى منافسة ايونات الهيدروجين (H+) ، ايونات اللنثانات (Ln3+) على الاستضافة داخل الحلقـة الكراونية مما يؤدي الى انخفاض نسبة الاستخلاص كلما ازداد تركيز ايونات الهيدروجين بالمحلول او ربما تحل محلها وتؤدي الى تفكك بعض جزيئات المعقد الناتج وكما في المعادلات التالية : Ln : الايون اللنثاني.L : الليكاند ( بوليمر الكروان ايثر ) .4. تعيين التركيب المحتمل للمعقد الناتج ما بين الايون اللنثاني والبوليمر : لتعيين تركيب المعقد الناتج ما بين الليكاند والايون تم استخدام طريقـة تحليـل الميل (Slope Analysis Method) . وتم التوصل الى تركيب المعقد من خلال الطريقة وكانت العلاقة كالاتي (1 : 1 : 3 Ln3+ : Crown : 3(NO¬3) ما بين الايـون والليكانـد والايـون السالـب على التوالي . دراسة تاثير درجة الحرارة : تم دراسة تاثير درجة الحرارة على عملية الاستخلاص وظهرت ان افضل درجة حرارة لعملية الاستخلاص لاغلب الايونات كانت (30 0C) باستثناء عدد من الايونات كانت نسبة الاستخلاص بدرجات حرارة اعلى كالاتي : . دراسة الدوال الثرموداينيميكية : وجد ان استخلاص ايونات اللنثنيدات من محلول حامضي تفاعل باعث للحرارة وذلك من خلال حساب قيم (Hex KJ/mole) ولكن زيادة الاستخلاص بالتسخين بسيطة من خلال حساب قيم معامل التوزيع (kD) والنسبة المئوية للاستخلاص (E%) وهـذا ما يثبت ان القوى المسيرة للتفاعل هي انتروبية على الاكثر حيث ظهرت قيمة (Sex) موجبـة لجميع الايونات . كما ظهرت قيمة (Gex KJ/mole) سالبة تدل على تلقائية التفاعل . وان قيـم Sex) ، Hex ، (Gex تتاثر بنوع الايون المستخلص والتوافق بالحجم ما بين قطر الايون وحجم الفجوة لبوليمر الكراون ايثر فكلما ازداد حجم الايون اللنثنيدي اقترب من حجم الفجوة الكراونية فيعطي استقرارية ثرموداينيميكية عالية لمعقد الترابط الايوني وزادت قيمة (Hex) ويحصل العكس كلما صغر حجم الايون اللنثنيدي .ب. فصل اللنثانات : تم فصل نماذج من ايونات اللنثنيدات يحتوي كل نموذج على مزيج من ايونين او ثلاثة ايونات من اللنثنيدات وذلك باستخدام كروموتوغرافيا العمود وكان الطور الثابت بالعمود هـو بوليمر الايثر التاجي (PDB18C6) والذي يعامل مسبقا بمحلول الطور المتحرك . والطور المتحرك كان محلول مخفف من حامض النتريك بتراكيز مختلفة تتناسب مع قيمة الدالة الحامضية للايونات المراد فصلها . ومعدل الجريان (1 ml/min) في اغلب الحالات وتم فصل الايونات التالية . 1. فصل ايونات (YIII) عن ايونات (ScIII) : كانت الدالة الحامضية لمحلول الاسترداد (pH=4) حيث احتجز الايتريوم بشكل تام لحين استرجاع جميع السكانديوم ثم يبدا بعدها استرجاع الايتريوم . 2. فصل ايونات (LaIII) عن ايونات (TmIII) : كانت الدالة الحامضية لمحلول الاسترداد (pH=5) وكان الفصل تام حيث احتجز اللنثنم بشكل كامل لحين استرجاع جميع الثوليوم بعدها يبدا استرجاع اللنثنم . 3. فصل ايونات (CeIII) عن ايونات (LuIII) : باستخدام محلول الاسترداد ذات الدالة الحامضية (pH=4.8) وحصل حجز تام للسيريوم على الحشوة لحين استرجاع كامل للوتشيوم بعدها يبدا استرجاع السيريوم . 4. فصل مزيج من ثلاث ايونات (ScIII) و(LaIII) و(PrIII) : تم فصل الايونات الثلاثة عن بعضها باستخدام محلول الاسترداد (HNO3) ذات دالة حامضية (pH=5) وكان السكانديوم اقلهم احتجاز لذلك استرجع بشكل تام خلال الدفعات الاولى ومن ثم بدا استرجاع ايونات البراسديميوم لان اللنثنم اكثرهم احتجاز بسبب قوة الترابط بين ايوناته والراتنج ولكن الفصل غير تام ما بين البراسديميوم واللنثنم حيث بدا اللنثنم بالخروج قبل الانتهاء من استرجاع اللنثنم . 5. فصل ايونات (TmIII) عن ايونات (LuIII) : تم فصل ايونات الثوليوم عن ايونات اللوتشيوم بشكل جزئي باستخدام محلول الاسترداد ذات الدالة الحامضية (pH=3.4) وكان فترة احتجاز الثوليوم اكثر قليلا من اللوتشيوم . ثم اعيد فصلها مرة اخرى بتغير قيمة الدالة الحامضية لمحلول الاسترداد الى (pH=3.0) حيث ازدادت فترة احتجاز اللوتشيوم وقلت فترة احتجاز الثوليوم على الحشوة وبقي الفصل بينهما غير تام بسبب التقارب في قوة ارتباط الايونين مع بوليمر الكراون ايثر . 6. فصل ايونات (LaIII) عن ايونات (CeIII) : تم فصل ايونات اللنثنم عن ايونات السيريوم باستخدام محلول الاسترداد ذات الدالة الحامضية (pH=4) وكانت فترة احتجاز السيريوم اكثر قليلا من اللنثنم لذلك تم استرجاع اللنثنم في البداية ولكن الفصل لم يكن تاما بسبب التقارب في الارتباط ما بين الايونين مع الراتنج . جـ. استخلاص وفصل ايونات اللنثنيدات من خامات Bastnaesite : تم فصل واستخلاص ثمانية ايونات من اللنثنيدات من ثلاثة انواع من خامات (Bastnaesite) الحاوية على اللنثنيدات . حيث توجد عناصر كل من (Lu,Dy,Eu,Y,Sm,Nd,Gd,Pr) في هذه الخامات بنسـب متفاوتـة . كما درس تاثيـر (pH) المحلول على عملية الاستخلاص وذلك باستخدام تركيزين مختلفين من محلول الاسترداد ( الطور المتحرك ) هما (1*10 - 3 M HNO3) و(1*10 - 4 M HNO3) . ولاحظنا بان للدالة الحامضية تاثير على زمن الاحتجاز للايونات على الحشوة ( بوليمر الكراون ايثر ) حيث احتجزت كمية من الايونات على الحشوة عندما كانت (pH=4.0) بالنسبة للايونات الخفيفة من اللنثنيدات بسبب قوة الترابـط بينـها وبين الراتنـج الموجود بالحشوة . وحصل احتجاز لبعض ايونات اللنثنيدات الثقيـلـة (Lu,Dy) عندما كانت (pH=3.0) لمحلو الاسترداد . استخدمـت تقنـيـة البلازما المحتثـة فـي تعييـن مـزيج عناصر اللنثنيدات . | The aim of the present work involved the extraction and separation of some lanthanide ions, scandium and yitterium (Sc,Y,La,Pr,Nd,Gd,Eu,Dy,Tm,Lu), using the polydibenzo - 18 - crown - 6 with nitrate salt. The factors was studied, shaking time, effect of pH, effect of temperature on the extraction ,complex structure formed and thermodynamic factors (Gex , Hex , Sex). Polydibenzo - 18 - crown - 6 was used for the extraction and separation of lanthanoides : - I - Lanthanoides Extraction Some lanthaniode ions (Ln3+) were extracted by polydibenzo - 18 - crown - 6 (PDB18C6). The best temperature and pH extracted for lanthanoide ions from lanthanum ions at 40 0C, (pH=5) of solution, the extraction percentage (97%) and the least extraction ions from Scandium were reached (71.25%) . The extraction of lanthanoide ions were studided at different pH between (1 - 5) to select the best pH for extraction.The pH value of solution from lanthanoide ions extraction increases with increase the cation diameter. The extraction percentage (E%) and distribution coeffeicent of lanthanide, scandium and yitterium ions increased with shaking time until equilibrium state. At the equilibrium state the remaining concentration (Caq) and extracting concentration (Corg) were constant .Extraction time to reach the equilibrium point at 50 min for most ions. Extraction for lanthanoide decreased by increasing the acidity of the solution between (0.1 - 7.0 M HNO3) . Because the protons displaced the lanthaniode ions (Ln3+) from the complex formation and the complex was dissociated according to the following equation L : polydibenzo - 18 - crown - 6 - Ln : Lanthanoide ion The structure of the extracted complex can be determined by slope method .The proposed structure obtained by extraction of 1 : 1 : 3 for lanthanoide ion : ligand : counter ion (NO3The best temperature for extraction process at 30 0C for most lanthnoide ions except for Lanthanum, Scandium at 40 0C and Yitterium at 60 0C From thermodynamic studies, show that the negative value of (Gex , Hex) it means the reaction process spontaneous and exothermic . While the extraction increased with temperature increase it means the reaction under entropy control and not enthalapy controlled. II - Lanthanoides Separation : The separation between two or three ions of lanthanoides was studied by Solid - Liquid Chromotography, using a packed column of polydibenzo - 18 - crown - 6 resin after treatment with nitric acid, as a stationary phase at different concentration of nitric acid were used as a mobile phase. The eluent flow rate at (1.0 ml/min). The length of the column (25 cm) with (1 cm) diameter.1 - Separation of yttrium ions from scandium ions by PDB18C6 resin as stationary phase and (1*10 - 4 M HNO3) as mobile phase with constant flow rate (1 ml/min). The scandium ions was eluted first one and the separation of Sc from Y was completed.2 - A complete separation of Lanthanum (La) from Thulium ions by the same condition as above, at pH=5 , in which the thulium ions were eluted first.3 - A complete separation of Cerium ions from Lutetium ions at (pH=4.8) of elution . Cerium completely retention until Lutetium ions were eluted. flow rate of elution (1 ml/min).4 - Separation of three lanthanoide ions (Pr,La,Sc) at (1*10 - 5 M HNO3) solution was eluted with flow rate (3 ml/min). A complete separation was achieved for the separation of Scandium from lanthanum and praseodymium ions at pH=5. Because the Pr and La ions retention by the resin. Praseodymium ion was partially separated from lanthanum ions.5 - A partial separation of thulium ions from lutetium ions, lutetium ions was eluted first at pH=3.4, while in the 2nd experiment thulium ions was eluted first at pH=3.6 - A partial separation of lanthanum ions from cerium ions by (1*10 - 4 M HNO3) as elution, Lanthanum ions were eluted first one.III - Extraction of Lanthanoides elements from Bastnaesite Ores : Three kinds of Bastnaesite ores were studied, using ICP emission (Inductively Coupled Plasma). The three Bastnaesite ores were contained the same elements (Pr, Gd, Nd, Sm, Y, Eu, Dy, Lu) at different percent. The separation of these elements by using the same column (25 cm with 1 cm diameter) at different pH (3,4), lighter lanthanide elements with best retention at pH=4, while the heavy elements (Dy, Lu) were retended at pH= 3 and have the same conformation as above

دراسة كهروكيميائية المنصهر الايوني المحضر بدرجة حرارة الغرفة لمزيج املاح كلوريد الكولين/حامض الترتارك == Electrochemical Studies At Room Temperature Ionic Liquid Of Choline Chloride/ Tartaric Acid

Author name: نور جاسم محمد الزیدي
Supervisor name: ھادي محمد علي عبود
General topic: Chemistry
Specific topic: Chemistry
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: The oxidation - reduction behavior of the newly prepared choline chloride/d - tartaric acid ionic liquid was studied by electrolysis at 25°C to 95°C with applied voltages of 0.5 to 5 volts. This ionic liquid was found stable up to 45°C and 5 volts as only showed small changes in current density. But, at 65°C the liquid showed noticeable unstable behavior particularly at or above 2.5 volt, which increased at higher temperature with increase conducting too.Solution of CuSO4.5H2O showed similar behavior to ionic liquid alone but with increased current density and conductivity which was attributed to viscosity changes and presence of copper (II) ions. However, NiCl2 solution in ionic liquid decomposed at lower potential of (1 volt) at 65°C while giving a similar behavior of current density and conductivity to copper solution. The CrO3 solution in ionic liquid was unstable from 65°C and 2.5 volts. However the conductivity was found to be similar than in ionic liquid alone up to 50°C which increased to more than ionic liquid at 60°C. This was attributed to the reduction of Cr (VI) to Cr (ІІІ) as was conformed by UV. Visible investigation.It was found possible to carry out electroplating of copper, nickel, and chrome from their above solution at high potential and 85°C. The amount of coated metals was found to increase with potential of 2, 2.5, and 3 volts. The non uniform irregular shapes of the coated metal particles were found to adhere strongly to the substrate of stainless steel, nickel, and copper. In addition the current efficiency was found to be high in case of chrome plating (~ 80%) while less than (50%) in copper and nickel plating.UV.Vis examination of CuSO4.5H2O indicate distorted octahedral coordination in this ionic liquid while NiCl2 solution showed after electroplating process a mixed tetrahedral and octahedral spectra.However CrO3 solution showed spectra of octahedral Cr (ІІІ) oxidation state when cooled from 85°C of the plating process indicating the reduction of Cr (VI) at around 60°C when its solution change color.Racah parameter, 10Dq , Nephelauxetic factor, and molar absorption were calculated to the above solutions.

تطبيق الكيمومترية في تقدير بعض العقاقير بطرائق تحليلية مختلفة == Application of Chemometrics in Determination of Some Drugs via Different Analytical Techniques

Author name: نهلة عبد الرحمن علي العساف
Supervisor name: سرمد بهجت ديكران | علاء كريم محمد
General topic: Chemistry
Specific topic: Chemistry
Degree: Doctorate
University: University of Baghdad
Language: English
University location: Baghdad
First pages:
Abstract: The work incorporated in the thesis is an attempt to develop new analytical methods for the determination of four medications belonging to different therapeutic groups namely; furosemide (FURO), carbamazepine (CARB), diazepam (DIAZ) and carvedilol (CARV). The study, which included the estimation of the studied drugs in their pure forms and in pharmaceutical formulations (tablets, ampoule and oral suspension), has been described in four chapters as follows : Chapter one : Includes an introduction to chromatography as well as basic principles, classification and theory of chromatography. A brief account on basic principles, modes and instrumentation of high performance liquid chromatography have been reported. The basic principles of derivative spectrophotometry and partial least squares method have been described as well as their applications in pharmaceutical analysis. In addition, this chapter gives a brief description of systematic name, structure and literatures on different methods reported for FURO, CARB, DIAZ and CARV.Chapter two : Covers the experimental part that includes chemicals, solvents and instruments used throughout this work as well as the description of the preparation of standard stock solutions and buffer solutions.Chapter three : Depicts the development and validation of a simple reverse - phase high performance liquid chromatographic method for the simultaneous analysis (separation and quantification) of furosemide, carbamazepine, diazepam and carvedilol.The effect of various factors such as mobile phase composition, flow rate, organic modifier and buffer percentage, pH of buffer, temperature and injection volume on the chromatographic performance of the four analytes have been studied. Under optimum conditions, isocratic elution with flow rate of 1.5 mL.min - 1 was employed on RP - NUCLEODUR® 100 - 5 C18ec (250 x 4.6 mm, 5μm) column. TheSummaryIImobile phase composed of 50 : 50 acetonitrile : deionized water (pH 3.6, acidified with acetic acid), the column temperature was 40°C and the injection volume 10 μL. The detection was done with UV detector at 226 nm, and the order of elution were FURO, CARB, DIAZ and CARV at 1.90 min, 2.79 min, 5.39 min and 9.56 min respectively. Calibration curves were constructed by plotting the peak area and the peak height against corresponding concentrations in the range of 1.0 - 100.0 μg.mL - 1 for furosemide, 2.5 - 100.0 μg.mL - 1 for both carbamazepine and diazepam and 5.0 - 100.0 μg.mL - 1 for carvedilol. The LOD and LOQ for the cited drugs were between (0.115 - 0.950 μg.mL - 1) and (0.348 - 1.440 μg.mL - 1) for peak area and (0.074 - 2.877 μg.mL - 1) and (0.225 - 1.599 μg.mL - 1) for peak height respectively. The precision in term of relative standard deviation was calculated and found to be less than 4 %, and accuracy expressed as relative error was less than 5%.The developed method has been applied successfully for the determination of the cited drugs in their pharmaceutical preparations and the recovery % were found to be (102.3% - 106.6%) and (97.5% - 103.0%) for furosemide, (94.2% - 98.2%) and (88.8% - 94.0%) for carbamazepine, (98.4% - 102.9%) and (96.9% - 107.5%) for diazepam, (92.3% - 106.4%) and (93.8% - 106.6%) for carvedilol for peak area and peak height respectively.Chapter four : Entitled “simultaneous determination of furosemide, carbamazepine, diazepam and carvedilol” deals with the simultaneous estimation of the four drugs in their quaternary mixtures via two methods namely : partial least squares regression and derivative spectrophotometry.Partial least squares (PLS) method was used as chemometric technique for simultaneous spectrophotometric estimation of FURO, CARB, DIAZ and CARV in their quaternary mixtures. Calibration graph for each drug was constructed in the concentration range of (1 - 20 μg.mL - 1) at 233.0 nm, 215.0 nm, 228.5 nm and 242.5 nm for FURO, CARB, DIAZ and CARV respectively and linear relations were obtained inSummaryIIIstudied concentration ranges. The first step in PLS methodology involved constructing a calibration (training) set from the spectrophotometric data obtained by careful UV - measurements on a set of known samples, composing of 84 mixtures that selected according to Simplex Lattice Mixture Design.The absorbance data matrices corresponding to the concentration data matrices for each of the 84 mixtures were obtained by the measurements of absorbance in the range 200 - 350 nm with a scan speed of 10 nm.sec - 1, averaging of 1.0 nm, bandwidth of 1.8 nm, and data interval of 0.5 nm against solvent blank. The PLS - 1 and PLS - 2 regression models were built with the help of OriginPro software version 2015 program and the concentration of the four drugs were then predicted. The result of relative standard deviation percentage (RSD %) and relative error percentage (RE %) were in the ranges (1.2638% - 6.0529%) and ( - 0.0845% - 3.8053%) respectively. The proposed method was successfully applied in the simultaneous determination of furosemide, carbamazepine, diazepam and carvedilol in their synthetic sample mixtures.Derivative spectrophotometric techniques (first, second, third and fourth derivatives) were developed for the simultaneous determination of FURO, CARB, DIAZ and CARV in their quaternary mixtures. It was found that FURO and CARV could be determined by all modes of derivative (i.e. first to fourth order); CARB could be determined by first, second, and third order; while only first and second modes of derivative could be used in the determination of DIAZ in presence of other investigated drugs.The zero crossing technique was employed in first derivative measurements, using the peak height to baseline at 336.5, 358.5, 306.0 and 331.5 nm for CARV, FURO, CARB and DIAZ respectively, which was in proportion to the drug concentration therefore they are used for the quantitative estimation of the titled drugs. The second derivative spectra of the same mixtures show that peak height at332.5 nm for CARV, and height to baseline at zero cross (273.5, 226.0 and 218.5 nm) for FURO, CARB and DIAZ respectively, could be used to quantify the corresponding concentration for each drug. While in the third derivative method the peak height at 288.0 nm and height to baseline at zero cross at 237.5 and 224.0 nm were found to be useful for the determination of CARV, FURO and CARB respectively. The careful inspection of the fourth derivative spectra obtained for the mentioned quaternary mixtures reveal that peak height at 288.0 nm and height to baseline at zero cross at 234.0 nm were in proportion to the CARV and FURO concentrations respectively.The results show no interferences from the excipients on the determination of the four drugs by utilizing these techniques, thus they were suitable to be applied for the estimation of CARV, FURO, CARB and DIAZ in their pharmaceutical preparations.

استخلاص وتقدير الايبوبروفين بطريقتي الامتصاص الجزيئي والامتصاص الذري في المستحضرات الصيدلانية == EXTRACTION AND DETERMINATION OF IBUPROFEN BY ALTRAVIOLITE - VISIBLE (UV - VIS)AND FLAME ATOMIC ABSORPATION SPECTROPHOTOMETRY IN PHARMACEUTICAL PREPARATION

Author name: نهاد كنعان عبد
Supervisor name: هادي حسن جاسم الشمري
General topic: Chemistry
Specific topic: Chemistry
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: تتضمن هذه الدراسة استحداث طرائق تحليلية جديدة في تقدير كمية العقار الايبوبروفين IBU (المستخدم كدواء لاسيترويدي مضاد للالتهابات وخافض للحرارة ومسكن للالام واستخدامات اخرى كثيرة) في بعض المستحضرات الصيدلانية على هيئة اقراص او شراب باستخدام تقنيتي الامتصاص الجزيئي (UV—Vis) والامتصاص الذري اللهبي(FAAS) بشكل غير مباشر. وتضمن البحث : اولا : تقدير العقار على هيئة معقد [IBU—Co(II)] ا - باستخدام مطيافية الاشعة فوق البنفسجية - المرئية UV - Vis في هذه الطريقة تم تقدير العقار عن طريق تكوين معقد IBU—Co(II) وتم تحديد الظروف العملية المثلى لعملية التعقيد مثل : 1. تاثير الدالة الحامضية pH Effectدرس تاثير الدالة الحامضية على عملية التعقيد ,وتم التوصل الى ان افضل قيمة مناسبة لاكتمال عمليـــــة التعقيـــد هــــي (pH =8.5) اذ اعطت اعلى ممتصية .2. تركيـــز ايــــون الكوبلـــــت Co(II) Concentration : وجد ان افضل تركيز لايون الكوبلت يلزم لعملية التعقيد مع حجم (5) مل من محلول العقار ذو التركيز (100 ppm) هو (71.4) جزء بالمليون. 3. تاثير درجة الحرارة Temp—Effect درس تاثير درجة الحرارة على عملية التعقيد اذ تبين ان درجة حرارة (30 مº) هي افضل درجة مناسبة لاتمام عملية التعقيد . 4. زمـــــن التفاعـــــــل Reaction Time في هذه الدراسة حددت افضل مدة زمنية كافية لاجراء عملية تكوين المعقد بين العقار وايون الكوبالت فكانت ثلاث عشر دقيقة .5. انتقاء المذيب المناسب اجريت عدة تجارب لتحديد افضل مذيب مناسب لاستخلاص المعقد الناتج مابين الكوبالت واللاجنة IBU—Co(II) فتبين ان استخدام مزيج من مذيب عضوي (البنزين والسايكلوهكسان) هو افضل مذيب مناسب لعملية الاستخلاص؛ كونه مذيبا جيدا للمعقد ومذيبا غير جيد لكل من الايون الفلزي واللاجنة .6. زمن الرج تم تحديد افضل مدة زمنية لرج المزيج داخل قمع الفصل لاتمام عملية استخلاص او انتقال المعقد من الطور المائي الى العضوي فتبين ان دقيقتين كانتا كافيتين لاستخلاص المعقد .7. حجم الطورين داخل قمع الفصل في هذه التجارب تم تحديد افضل حجم من الطور العضوي (المزيج من البنزين والسايكلوهكسين) اللازم لاستخلاص المعقد من المحلول المائي ذو حجم (5)مل فتبين ان واحد مل من المزيج العضوي كاف لعملية الاستخلاص .8. النسبة المولية درست نسبة التعقيد بين العضيدة والايون الفلزي M : L بعد تثبيت جميع الظروف المثلى وباستخدام طريقتين هما طريقة جوب والنسبة المولية فظهرت النتيجة متطابقة، وان نسبة التعقيد كانت (1 : 1).9. الطول الموجي للامتصاص UV - Vis Absorption استخدمت تقنية الاشعة فوق البنفسجية - المرئية لتحديد الاطوال الموجية لكل من العقار والايون الفلزي والمعقد الناتج وطالما ان لهذه المكونات الثلاث اكثر من طول للامتصاص تم استخدام الاطوال الموجية التي لاتسبب اي تداخل بين المكونات الثلاث ولذلك تم تثبيت الاطوال الموجية للامتصاصات كما يلي : a. الطول الموجي لامتصاص ايون الكوبالت هو 509 نانومتر.b. الطول الموجي لامتصاص العضيدة هو 221 نانومتر .c. الطول الموجي لامتصاص المعقد 603 نانومتر . ب - منحني المعايرة Calibration Curveتم تحضير منحني المعايرة للمعقد الناتج وباستخدام التقنيتين المذكورتين سابقا وذلك لاستخدامها في قياس او تقدير كمية العقار في نوعين من الاقراص ونوعين من الشراب المتوافرة بالاسواق كمستحضرات صيدلانيه من مناشيء مختلفة هي1 - شراب بروفينال الاماراتي2 - شراب اسيا بروفين السوري المنشا3 - اقراص شركة اجانتا الهندية4 - اقراص بروفين من شركة ابوت الامريكيه د - اطياف الاشعة تحت الحمراء IRللتاكد من تكوين المعقد بين ايون الكوبالت والعضيدة سجلت اطياف IR للمعقد IBU - Co(II) وكـــذلك اطياف IR الى العضيدة قبل التعقيد وتم اقتراح صيغة تركيبية للمعقد بعد ان اختفت قمت O - H لمجموعة الكاربوكسيل نتيجة لازاحة البروتون وارتباط الاوكسجين مباشرة مع الايون الفلزي وكذلك حصول ازاحة للاعداد الموجيه للقمم الاخرى العائدة الى العضيدة للسبب نفسه، وكذلك ظهور قمة ارتباط جديدة مابين الايون Co(II) وذرة الاوكسجين العائدة الى العضيدة وكذلك ظهور قمة عند 848 سم تدل على ارتباط جزيئات الماء داخل الكرة التناسقية.ثانيا : تقدير العقار IBUعلى هيئة IBU - Ni(II)تمت دراسة طريقة ثانية لتقدير العقار عن طريق تكوين معقد مخلبي بين العضيدة وايون النيكل ودرست الظروف المثلى لعملية التعقيد وباستخدام تقنيتي ا - المطيافية الجزيئية UV - Vis ب - تقنية الامتصاص الذري اللهبي ودرست الظروف المثلى لعملية التعقيد وقد وجد ان جميع الظروف المثلى لعملية التعقيد مطابقة للظروف المثلى لتكوين المعقد ( IBU - Co(II باستثناء زمن التفاعل 8 دقائق ونسبة الطورين العضوي الى المائي كانت (5 : 2) وافضل تركيز لايون النيكل كان 62.5) ) جزء بالمليون .كما ظهران الطول الموجي لاعظم امتصاص max λ للمعقد (IBU - Ni(II عند349 .ثالثا : النتائج الاحصائية باستخدام تقنية المطيافية الجزيئية 1 - مدى الخطية في منحني المعايرة تمت دراسة مدى الخطية وكانت المديات التي تطيع قانون بير بين (1 - 10)x10 - 2M بالنسبة للدواء في المعقد ( IBU - Co(II اما بالنسبة للمعقد (IBU - Ni(II فكانت (1 - 14)x10 - 2M .2 - حد الكشف LODكانت قيمة LOD بالنسبة للمعقد (IBU - Co(II 0.01025 M وبالنسبة للمعقد (IBU - Ni(II 0.013 M.3 - الاستردادية المئوية Rec% كانت النسبة المئوية للاستردادية في حالة المعقدIBU—Co(II) (96.8%) اما في حالة المعقد IBU—Ni(II) (97.821%). 4 - الخطا النسبي المئوي Er% كان الخطا النسبي المئوي في حالة المعقد IBU - Co(II) بحدود ( - 3.2%) اما في حالة المعقد IBU - Ni(II) بحدود (2.18% - ) .5 - الانحراف القياسي النسبي المئوي RSD% ان قيم الانحراف القياسي النسبي المئوي في حالة المعقد هي IBU - Co(II) (0.1802%) و(2.13%) في حالـــة المعـــقد IBU - Ni(II). رابعا : النتائج الاحصائية باستخدام تقنية FAAS 1 - مدى الخطية في منحني المعايرة (5x10 - 5 - 4.3 x10 - 4)مولاري في حالة المــــــــعقد (IBU - Co(II و(0.9x10 - 6—5.8x10 - 6 ) مولاري في حالة المعقد IBU - Ni(II) .2 - حد الكشف LODدرست الحدود الدنيا التي يمكن الكشف عنها باستخدام تقنية FAAS فكانت (0.184) مولاري في حالـــــــــة المعــــــقد ( IBU - Co(IIو0.124) ) مولاري في حالة المعقد IBU—Ni(II) 3 - الخطا النسبي المئوي Er% كان ( - 9.278%)في حالة المعقد IBU - Co(II) و((1.031% في حالة المـــــعقد IBU—Ni(II).. - 4الانحراف القياسي النسبي المئوي RSD% من قيم الانحراف القياسي النسبي المئوي لمنحني المعايرة 2.52%) )في حالة المــــــعقد IBU - Co(II) و( 2.18% )في حالة المعقد IBU - Ni(II) دلالـــة علــى مطاوعة قانــــون بيـر - لامبرت . | This thesis includes the development of new analytical methods in the estimation of the amount of the drug ibuprofen IBU (used as a medicine for non - sterodial as an anti - inflammatory and antipyretic and analgesic for pain and uses many other) in the aqueous solutions as well as in some pharmaceutical products in the form of tablets or syrup using (UV - Vis) Spectrophotometry and Indirect (FAAS),in addition to investigating complexes obtained throughout. The analytical data obtained throughout this study are summaried as follows : 1 - Determination of IBU as IBU - Co(II) Complex using ultraviolet UV - Vis SpectrophotometryThe optimal experimental conditions for the chelate formation : The( pH =8.5) ,concentration of Co(II) (71.4µg/ml) , reaction time (13 minutes) , temperature (30 Cº), aqueous — to - organic phases (2 : 3), Extraction time of complex (2 minutes), three extraction process was almost enough, the mixture of ( benzene and cyclohexane) , proved to be the best solvent fore extraction of the complex IBU - Co(II) without interference, (λ=603 nm) , metal - to - ligand (1 : 1).Analytical figures of merit for the determination of IBU using the developed procedure : Linear dynamic range [(1 - 10)x10 - 3M], LOD (0.0102 M), Sandell Sensitivity index (0.1008 µg /cm2), Erel.%( - 3.2), Recovery%(96.8%) , RSD% (0.1802%). 2 - Determination of IBU as IBU - Co(II) Complex using indirect FAAS.We used the flame atomic absorption spectrophotometry as a second technique . The study of the optimum conditions for the complexes prepared between Co(II) and Ibuprofen found it identical with the optimum conditions of the UV - Vis . Analytical figures of merit for the determination of IBU using the developed procedure : Linear dynamic range [(5x10 - 5 - 4.3x10 - 4M], LOD (0.184 M), Erel.%( - 9.278), RSD% (2.52%).The IR absorption spectra showed new peaks (ύs IBU - Co(II).) confirming the formation of the complex IBU - Co(II).3 - Determination of IBU as IBU - Ni(II) Complex using ultraviolet UV - VisThe optimal experimental conditions for the chelate formation : The( pH =8.5) ,concentration of Ni(II) (62.5µg/ml) , reaction time (8 minutes) , temperature (30 Cº), aqueous — to - organic phases (5 : 2), Extraction time of complex (2 minutes), three extraction process was almost enough, the mixture of ( benzene and cyclohexane) , proved to be the best solvent fore extraction of the complex IBU - Ni(II) without interference, (λ=349 nm) , metal - to - ligand (1 : 1).Analytical figures of merits for determination of IBU using the developed procedure : Linear dynamic range [(1 - 14)x10 - 2M], LOD (0.013 M), Sandell Sensitivity index (0.2135 µg /cm2), Erel.%( - 2.18) , Recovery%(97.821%) , RSD% (2.13%). 4 - Determination of IBU as IBU - Ni(II) Complex using indirect FAAS. We used the flame atomic absorption spectrophotometry as a second technique . The study of the optimum conditions for the complexes prepared between Ni(II) and Ibuprofen found it identical with the optimum conditions of the UV - Vis . Analytical figures of merit for the determination of IBU using the developed procedure : Linear dynamic range [(0.9x10 - 6 - 5.8x10 - 6M], LOD (0.124 M), Erel.%(1.03%), RSD% (2.18%). The IR absorption spectra showed new peaks (ύs IBU - Co(II).) confirming the formation of the complex IBU - Co(II).

استخلاص وتقدير عقار الايزوبروباميد في المركبات الصيدلانية باستخدام الكوبلت الثنائي والنحاس الثنائي == Extraction and Estimation of Isopropamide Drug in pharmaceutical compound using cobalt Co (II) and copper Cu (II)

Author name: نــــداء ابراهـــيم مهــــدي
Supervisor name: هادي حسن جاسم الشمري
General topic: Chemistry
Specific topic: Chemistry
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: تتضمن الدراسه في هذا البحث استحداث طرائق تحليليه جديدة في تقدير المركب الدوائي Isopropamide - Iodide ( المستخدم في علاج امراض الجهاز الهضمي التي تشمل التهاب وقرحة المعدة والامعاء وكذلك تشنج القولون العصبي) في بعض المستحضرات الصيدلانية بطريقة الامتصاص الطيفي الجزيئي وباستخدام تقنية الاشعة المرئية - فوق البنفسجية .UV - Vis)). في هذا البحث حضرت لاول مره معقدات مابين العقار وعنصري التعقيد الكوبلت (II) Co , والنحاس الثنائي (II) Cu . ويمكن تلخيص النتائج التي تم التوصل اليها في هذا البحث بما يلي : اولا : تقدير العقار على هيئة معقد ] (II) Isop - Co [ باستخدام مطيافية UV - Visible .في هذه الطريقه تم تقدير العقار بتكوين المعقد ](II)Isop - Co [ بعد دراسة الظروف العمليه الفضلى التاليه : الداله الحامضيه pH= 8.5 وتركيز ايون الكوبلت الثنائي Co(II) كان بحدود(80 ppm)وزمن التفاعل كان (20 min) , ودرجة الحراره 60 ℃) ) التي كانت امثل درجة حراره لاتمام عملية التعقيد اما نسبة الطور المائي الى الطور العضوي فكانت (3 : 5) حيث وجد بان الحجم 3mlهو امثل حجم للطور العضوي (السايكلوهكسان) لاتمام عملية الاستخلاص للمعقد . وقد تم اختيار السايكلوهكسان افضل مذيب عضوي من بين مجموعه من المذيبات العضويه مثل (الكلوروفورم , الايثانول, الميثانول, كحول البنزيل , خلات الاثيل , البنزين , رابع كلوريد الكاربون , والايثر) كونه مذيب جيد للمعقد الناتج ., وغير جيد لكل من العقار والايون الفلزي. اما افضل زمن للاستخلاص الامثل فهو ( 2 min ) , اما عملية الاستخلاص لمره واحده كانت كافيه جدا لاستخلاص المعقد وقد تم تقدير المعقد طيفيا عند الطول الموجي 353) = maxλ ) , وقد وجد ان نسبة الاتحاد الموليه بين الايون الفلزي والعقار هي (1 : 2).اما مديات التركيز في تعيين العقار فكانت مابين100) - (20 اما قيمة حد الكشف فكانت g.ml - 1 μ (0.938 ) DL وكانت حساسية ساندل بحدودcm - 2 g.μ 4.11x10 - 2) ) وتم حساب الخطا النسبي المئوي فكان بحدود (0.21% ) والاسترداديه كانت (99.79% ) ., اما الانحراف القياسي النسبي المئوي فكان بحدود (RSD%= 2.14% ) . ثانيا : تقدير العقار على هيئة معقد ] (II) Isop - Cu [ باستخدام مطيافية UV - Visible بعد دراسة الظروف العمليه الفضلى تم تقدير العقار بتكوين المعقد] (II) Isop - Cu [, وكانت تلك الظروف كالاتي : الداله الحامضيه , pH= 5.6 وتركيز ايون النحاس الثنائي Cu(II) كان بحدود (60ppm), وزمن التفاعل كان (20 min) , ودرجة الحراره 60 ℃) ) التي كانت امثل درجة حراره لاتمام عملية التعقيد, اما نسبة الطور المائي الى الطور العضوي فكانت (2 : 5) حيث وجد بان الحجم 2ml هو افضل حجم للطور العضوي (السايكلوهكسان) لاتمام عملية الاستخلاص للمعقد . وقد تم اختيار السايكلوهكسان افضل مذيب عضوي من بين مجموعه من المذيبات العضويه مثل (الكلوروفورم , الايثانول, الميثانول, كحول البنزيل , خلات الاثيل , البنزين , رابع كلوريد الكاربون , والايثر) كونه مذيب جيد للمعقد الناتج ., وغير جيد لكل من العقار والايون الفلزي. اما افضل زمن للاستخلاص الامثل فهو ( 3 min ) , وعملية الاستخلاص لمره واحده كانت كافيه جدا لاستخلاص المعقد وقد تم تقدير المعقد طيفيا عند الطول الموجي ( 355= maxλ ) , كانت نسبة الاتحاد الموليه بين الايون الفلزي والعقار فكانت (1 : 2).اما مديات التركيز في تعيين العقار فكانت مابين 20 - 100 )ppm) , وحد الكشف كان (0.998 μg.ml - 1 ) D.L , وحساسية ساندل كانت بحدود cm - 2 g.μ 3.34)) .اما حساب الخطا النسبي المئوي فكان بحدود ( 0.25%) والاسترداديه كانت (99.79% ) اما الانحراف القياسي النسبي المئوي فكان (RSD% =0. 250% ) . | Research includes the development of new methods to estimate the compound Isopropamide - Iodide in drug used in the treatment of diseases of the digestive system, which includes (inflammation and ulcers of the stomach and intestines, as well as irritable bowel spasm) in some way pharmaceuticals and molecular absorption using the technique of Visible - ultraviolet. In this thesis prepared the first time coplexes between the [Isop - Co (II)] , [Isop - Cu (II)] , which did not attend these complexels by After reviewing all the literature published in scientific journal. 1. Determination of Isop. as [Isop - Co (II)] complex using UV - Vis. The optimal experimental condition for the complex formation : The (PH=5.6) concentration of Co (II) 80 ppm , reaction time is ( 20 min.) Temperature (70℃ ) , aqueous - to - organic phases (3 : 5) , extraction time of complex ( 2 min ) one extraction process was almost enough, the cyclohexan proved to be the best solvent for extractiog of the complex Ipso . - Co(II) without interference (ℷ = 353nm ) , metal - to - ligand (1 : 2 ), Analytical figres of merit for determination of Isop. using the developed procedure : linear dynamic range ( 20 - 100 ppm ) D.L ( 0.938 μg.ml - 1 ) ,Sandell sensitivity index ( 4.11 x10 - 2 μg.cm - 1 ) , Erel % (0.21% ) , RSD% ( 2.14 % ) , Recovery % ( 99.79 % ) 2. Determination of Isop. as [Isop - Cu (II)] complex using UV - Vis. The optimal experimental condition for the complex formation : The (PH=8.5), concentration of Co (II) ( 60 ppm ) , reaction time is ( 20 min.) Temperature ( 60 ℃ ) , aqueous - to - organic phases (5 : 2 ) , extraction time of complex ( 3 min ) one extraction process was almost enough, the cyclohexan proved to be the best solvent for extractiog of the complex [ Ipso . - Co(II) ] without interference ( ℷ =355nm ) , metal - to - ligand (1 : 2 ), Analytical figres of merit for determination of Isop. using the developed procedure : linear dynamic range ( 20 - 100 ppm ) D.L (0.93842 μg.ml - 1 ) , Sandell sensitivity index (3.34 x10 - 2 μg.cm - 1 ) , Erel % ( 0.25 % ) , RSD% ( 2. 077% ) , Recovery % ( 99.75 % ) .

التقدير الطيفي لايوني البلاتين (II) والبلاديوم (II) كمعقدات مع الكاشف الجديد 1 - (4 - انتي بايرول ازو) حامض السلسليك == Spectrophotometric determination of Platinum (II) and Palladium (II) as Complexes with New Reagent - (4 - antipyriyl azo) Salicylic acid

Author name: نبا كريم سعيد محمد القريشي
Supervisor name: حسين جاسم محمد
General topic: Chemistry
Specific topic: Chemistry
Degree: Master
Language: English
University location: Najaf
First pages:
Abstract: تم في هذه الدراسة تحضير الكاشف الجديد 1 - ('4 - انتي بايرايل آزو ) حامض السالسليك (APASA) وتم دراسة الكاشف المحضر مع (عشرة) ايونات فلزية مع استحداث طريقة طيفية لتقدير كل من ايوني البلاديوم (II) ,والبلاتين (II) بهذا الكاشف ,و كان الطول الموجي للامتصاص الاعظم للكاشف ((APASA (458) نانوميترو الطول الموجي للمعقدات المتكونة لايونات البلاديوم (II) ,والبلاتين (II) مع الكاشف (540, 488) نانوميتر على التوالي في الوسط المائي ,فضلا عن دراسة الظروف الفضلى لتفاعل هذه الايونات مع الكاشف ,كحجم وتركيز الكاشف, والدالة الحامضيه, والمدة الزمنية لاستقرارية المعقدات المتكونة ودرجة الحرارة, وترتيب الاضافة لمكونات التفاعل , وتم تحديد منحني المعايرة لكل هذه الايونات مع الكاشف فكان معقد البلاديوم (II) يقع ضمن مدى التراكيز (0.1 - 04.0) جزء بالمليون بمعامل ارتباط ( 0.9942 ( R2= وقيمة معامل الامتصاص المولاري ε( 1.2 x105) لتر.مول - 1.سم - 1وحساسية ساندل (8×10 - 3) مايكروغرام .سم - 2 . ووقع معقد البلاتين (II) ضمن مدى التراكيز ( - 0.1 2.00) جزء بالمليون بمعامل ارتباط 0.9961)=(R2 وقيمة معامل الامتصاص المولاري ε 4.2x105 )) لتر .مول - 1 .سم - 1 وحساسية ساندل (4×10 - 3) مايكروغرام .سم - 2. وتم دراسة طبيعة المعقدات الذائبة المتكونة بين ايوني البلاديوم(II), والبلاتين (II) مع الكاشف من خلال ايجاد نسبة الايون الفلزي الى الكاشف (M : L) باستعمال طريقتي التغيرات المستمرة والنسبة المولية لكل معقد فكانت تساوي (1 : 2) للمعقدين عند دالة حامضية( 3,8)على التوالي ,وتم ايضا حساب ثابت الاستقرارية (Kst) للمعقدين وكانت تساوي (Kst= 3x109) لتر2 .مول - 2 و(Kst=2x109) لتر2 .مول - 2 لمعقدي البلاديوم والبلاتين على التوالي مما يدل على ان المعقدات ذات استقرارية عالية . وتم تحديد ضبط ودقة الطريقة التحليلية المتبعة باستعمال محاليل قياسية من هذه الايونات مع تركيز قياسي للكاشف فكانت التكرارية (R.S.D.%) فيما يخص تركيز ((1.5جزء بالمليون من البلاديوم (II) والبلاتين (II) ,وهي تساوي الى ( 0.4, 0.77) وكانت النسبة المئوية للدقة (Erel. %) 0.6,0.7))% لكل ايون على الترتيب . وفيما يخص التركيز (2.00) جزء بالمليون من البلاديوم (II), والبلاتين (II) فهو (0.80 0.3,) وكانت النسبة المئوية للدقة (Erel. %) (0.8 , 0.5,) % لكل ايون على الترتيب. وعينت التداخلات المحتملة للايونات قيد الدراسة فضلا عن الايوني البلاديوم (II ) والبلاتين (II ) بعضها مع البعض, وتم دراسة اضافة عوامل الحجب المناسبة .و رواسب المعقدات بتحديد بعض الصفات الفيزيائية لها مثل درجة الانصهار وقابلية الذوبان والتوصلية المولارية فضلا عن قياس اطياف الاشعة تحت الحمراء مع اقتراح الصيغة التركيبية للمعقدات المتكونة مع الكاشف (APASA ) . وتم تطبيق الطريقة التحليلية المتبعة على محاليل قياسية مختبرية محضرة وتم تطبيقها ايضا على نماذج بايولوجية ومياه النهر لمعرفة تراكيز ايوني البلاديوم(II) والبلاتين(II) فيها . | The research includes primary study of the reaction of 1 - ( '4 - anti pyriyl azo) Salicylic acid (APASA) with (Ten) metal ions ,and development of Spectrophtometric method for the determination of Palladium (II) and Platinum (II)with this reagent . The wavelength of maximum absorption for the reagent was found at (458) nm and for the complexes formed between these ion with this reagent was found at (540,488) nm for Pd (II) and Pt (II), respectively in aqueous medium ,also the optimum conditions for the reaction of these ion with the reagent were employed ,such as the volume of reagent solution ,time ,temperature, order of addition and effectives of pH, The calibration curves of these complexes were constructed ,Beer,s law was obeyed in the range of (4.0 - 0.1) ppm for Palladium (II) with a correlation coefficient of ( R2 =0.9942) and molar absorptivity( ε =1.2x105) L.mol - 1.cm - 1 and sandell sensitivity was (8×10 - 3) μg.cm - 2 . For Platinum (II) the rang was (2.0 - 0.1) ppm with a correlation coefficient of (R2 =0.9961) molar absorptivity (ε =4.2x105) L.mol - 1 .cm - 1, and sandell sensitivity was (4×10 - 3) μg.cm - 2 . . The stoichiometry of the formed soluble complexes among Palladium (II) and Platinum (II) with reagent was investigated by both the continuous variations method and mole ratio method ,the ratio (M : L) was (1 : 2) for complexes at pH(8 and 3) respectively .The stability constant (Kst) for the complexes were equal to (Kst =3 x109L2.mol - 2) and (Kst =2 x109L2.mol - 2) for Palladium(II) and Platinum (II) respectively . . Precision and accuracy of the analytical procedure were showed for (1.5) ppm of Pd(II) and Pt (II) that R.S.D% was equal to (0.77 and 0.4 %) and Erel % was found to be (0.7% and 0.6%) for these ions , respectively. the analytical procedure were showed for (2.00) ppm of Pd(II)Pt (II) that R.S.D% was equal to (0.80 and 0.3 %) and Erel % was found to be (0.8 and 0.5%) for these ions , respectively. . The interference of metal ions in the presence of related ions was determined , as well as masking of these ions by suitable masking agents was studied. The physical properties of precipitants were studied through the establishment of melting point, solubility and molar conductivity as well as the measurement of infrared spectra ,with the suggestion of structural formula of the formed complexes with the reagent (APASA). The method was applied for the determination of the content of Pd(II) and Pt (II), in environmental samples and biological samples.

تحضير وتشخيص معقدات بعض العناصر الانتقالية مع ليكاندي ثايوسيميكاربازون جديدتين == Synthesis and Characterization of Some Transition Metal Complexes with Two New Thiosemicarbazone Ligands

Author name: ميثاق سعيد محمد
Supervisor name: عبد الله محمد علي حبيبان
General topic: Chemistry
Specific topic: Chemistry
Degree: Master
Language: Arabic
University location: Najaf
First pages:
Abstract: تضمن البحث تحضير ليكاندين جديدتين من قواعد شف وذلك بتكاثف الثايوسيميكابازايد مع البنزوين واحدى معوضات الاسيتوفينون التي اعطت الليكاندين الاتيين. 1. بنزوين ثايوسيميكاربازون (L1 = BnTSC).2. بارا - بروبانال اسيتوفنيدين ثايوسيميكاربازون (L2 = p - PrAPTSC). شخصت اليكاندين بالطرائق الطيفية المتاحة باستعمال الاشعة فوق البنفسجية - المرئية والاشعة تحت الحمراء وقياس درجة الانصهار وكذلك التحليل العنصري الدقيق للعناصر. لقد استعملت هاتان الليكاندان في تحضير اثنا عشر معقد كيليتي جديد لكل من ايونات الكوبلت والنيكل والنحاس والخارصين والكادميوم والزئبق الثنائية التكافؤ وقد حضرت هذه المعقدات بعد تثبيت الظروف الفضلى من تركيز مولاري ونسبة مولية وذلك من دراسة اطياف الاشعة فوق البنفســجية - المرئية لمحاليـــل مزج هذه الايونات مع محاليل الليكاندين (BnTSC) و(p - PrAPTSC) كل على حده. شخصت المعقدات الصلبة بعد عزلها طيفيا بوساطة الوسائل الطيفية المتاحة كاطياف (UV - Vis) والاشعة تحت الحمراء (IR). وقد اظهرت محاليلها في الايثانول ازاحة حمراء مقارنة مع محاليل الليكاندين. وعند مقارنة اطياف الـ (IR) لهذه المعقدات مع اطياف الليكاندين الحرة فقد لوحظ تغيرات واضحة اذ اظهرت حزما جديدة لم تكن موجودة اصلا في اطياف الليكاندين في حين عانت حزم اخرى من تغيرات واضحة في الشكل والشدة والموقع وقد يعود السبب في ذلك الى حصول عملية التناسق بين الايونات الفلزية والليكاندين ، تبين منها ان الليكاند (BnTSC) سلكت كليكاند ثلاثية المخلب في حين سلكت (p - PrAPTSC) كليكاند ثنائية المخلب. وبينت نتائج التحليل الدقيق للعناصر (C.H.N) وحساب النسبة المئوية للايونات الفلزية في معقداتها توافقا كبيرا بين النسب المحسوبة نظريا وتلك النتائج المستحصلة عمليا. مما اعطى دعما للصيغ الجزيئية المقترحة. وقد تم استغلال نتائج قياسات (UV - Vis) لحساب النسبة المولية في تعيين ثوابت التكوين (الاستقرار) لهذه المعقدات. في حين استعملت التقنية المذكورة نفسها لمعرفة مدى استقرار المعقدات في محاليلها وبمرور الزمن. وبينت دراسة التوصيلية الكهربائية المولارية لمحاليل المعقدات المحضرة في هذا البحث في مذيبي ثنائي مثيل اوكسيد الكبريت وثنائي مثيل فوماميد وعند التركيز (1×10 - 3) مولاري وفي درجة حرارة المختبر بانعدام الصفة الايونية لهذه المحاليل. اما قياسات الحساسية المغناطيسية للمعقدات فقد بينت ان معقدات الكوبلت (II) والنحاس (II) ولكلا الليكاندين مضافا لمعقد النيكل (II) لليكاند (BnTSC) فانها تمتلك صفات بارامغناطيسية في حين اتصفت بقية المعقدات الكيليتية موضوع الدراسة بالدايامغناطيسية. من كل ما تقدم من نتائج مستحصلة التي تم التوصل اليها فقد تم اقتراح الاشكال الفراغية للمعقدات. | The research includes preparation of two new Schiff bases ligands drived from condensation reaction of thiosemicarbazide with benzoin and substituted acetophenone to give the following ligands : 1. Benzoin thiosemicarbazone (BnTSC = L1). 2. p - propanal acetopheneden thiosemicarbazone (p - PrAPTSC = L2). The identity of these ligands have been characterized by spectral methods (UV - Vis, IR) and another physical properties (m.p.) and elemental analysis. Twelve chelate complexes of two ligands with Co(II), Ni(II), Cu(II), Zn(II), Cd(II), and Hg(II) were prepared and characterized after fixing the optimum conditions of molar concentration and mole ratio using (UV - Vis) technique of mixed solutions of the above ions with (BnTSC) and (p - PrAPTSC ). Electronic spectra of prepared complexes in ethanolic solution showed batho chromic Shift compared with that of free ligands. Thr IR, spectra (using KBr disc) of these complexes showed some charges compared to those of free ligands. New bards were observed indicating that the ligand (BnTSC) is coordinated to the metal ion as atridentate ligand while the other ligand (p - PrAPTSC) coordinated as abidentate ligand. Micro elemental analysis for all complexes were made, the percentage of metal ions were determined using flame atomic absorption spectroscopy. Good agreement was obtained between the found and calculated values. The stability of the complexes in solution were tested by evaluation of (stability formation constants) by electronic spectrum. In addition to determined the stability of there complexes at different time. Conductivity measurement for (DMSO) and (DMF) solutions at (1×10 - 3M) has shown non ionic character for all chelate complexes. Magnetic susceptibility measurements of Co(II) and Cu(II) complexes of both ligands and Ni(II) chelate complex with (BnTSC) show that they are paramagnetic, but the rest complexes show diamagnetic properties. Finally from the observations the geometric structure of the synthesized complexes were suggested

تحضير مركبات جديدة مشتقة من N - امينو كوينولين - 2 - اون == Synthesis of new compounds derived from N - amino Quinoline - 2 - one

Author name: مهدي فرحان راضي
Supervisor name: رضا ابراهيم حسين البياتي
General topic: Chemistry
Specific topic: Chemistry
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: تعد مشتقات ( كوينولين - 2 - اون ) من المشتقات المهمة من الناحية البايولوجية والصناعية لذلك تم التوسع في الدراسات التخليقية لمشتقاتها فقد تضمن هذا البحث تحضير اثنان واربعين مركبا جديدا , تحتوي على حلقات غير متجانسة بطرائق متعددة كما موضح في المخططات ( 4,3,2,1) وقد تمت دراستها وتشخيصها بوساطة طيف الاشعة تحت الحمراء ( FT - IR ) وطيف الاشعة فوق البنفسجية ( UV ) وطيف الرنين النووي المغناطيسي ( 1H - NMR 13C - NMR ) وتحديد الخواص الفيزيائية مثل درجة الانصهار واللون . ويمكن اجمال ماجاء في البحث : 1 - تحضير المركب الاساس ( N - امينو كوينولين - 2 - اون )( M1 ) او ( N - امينو - 6 - نايترو كوينولين - 2 - اون )( M3 ) عن طريق تفاعل الكومارين او 6 - نايترو كومارين مع الهيدرازين المائي باستخدام الايثانول كمذيب . 2 - تحضير عشرة مشتقات جديدة من قواعد شيف ( M13 - M4 ) من خلال مفاعلة المركب الاساس ( M1 ) مع الالديهايدات والكيتونات الاروماتية المختلفة . 3 - تحضير ستة مشتقات جديدة من الايمايدات ( M19 - M14 ) عن طريق تفاعل المركب الاساس ( M1 ) او ( M3 ) مع الانهيدريدات المختلفة من دون مذيب . 4 - تحضير بعض مشتقات اليوريا ( M25 - M20 ) عن طريق تفاعل المركب الاساس ( M1 ) او ( M3 ) مع مركبات الايزوسيانات المختلفة . 5 - تحضير مشتقات الفورماميد ( M27 , M26 ) عن طريق تفاعل المركب الاساس ( M1 ) او ( M3 ) مع حامض الفورميك . 6 - تحضير مشتقات جديدة تحتوي على حلقات غير متجانسة ( M34 - M28 ) عن طريق تفاعل المادة الاساس ( M1 ) مع مركبات الثايول . 7 - تحضير المشتق ( M35 ) عن طريق تفاعل المادة الاساس ( M1 ) مع ثنائي اثيل مالونات . 8 - تحضير مشتقات التترازين ( M37 , M36 ) عن طريق تفاعل المركب الاساس ( M1 ) مع الثايوسيمي كاربازايد او مع ثنائي كبريتيد الكاربون والهيدرازين بوجود هيدروكسيد البوتاسيوم . 9 - تحضير المشتق ( M38 ) عن طريق تفاعل الكومارين مع السيمي كاربازايد هايدروكلورايد بوجود البردين كمذيب .10 - تحضير مشتق الثايادايازول (39 M ) عن طريق تفاعل الكومارين مع 2 - امينو - 5 - هيدرازينو ثايادايازول . 11 - تحضير الجالكونات ( M42 - M40 ) عن طريق تكاثف المركب ( M1 ) مع الالديهايدات الاروماتية المختلفة بوجود هيدروكسيد البوتاسيوم | The Quinoline - 2 - one derivatives are very important compounds and these are used in biological and industrial field because of that forty two novel derivatives containing heterogeneous cycles have been synthesized by many methods. The synthesized compounds have been characterized by some spectral analysis such as ( FT - IR ) , ( U.V ) and ( 1H - NMR , 13C - NMR ) and determination of their physical properties such as melting points and color . This work involved : 1 - Synthesis of starting material ( N - amino quinoline - 2 - one ) (M1) or ( N - amino - 6 - nito quinoline - 2 - one ) (M3) by the reaction of coumarine or 6 - nitro coumarine with hydrazine hydrate in ethanol as a solvent . 2 - Synthesis of ten new derivatives of Schiff's bases ( M4 - M13) by the reaction of starting material (M1) with appropriate aromatic aldehydes or ketones . 3 - Synthesis of six new derivatives of imides (M14 - M19) by the reaction of starting material (M1) or (M3) with appropriate anhydrides without solvent . 4 - Synthesis of some urea derivatives (M14 - M19) by the reaction of starting material (M1) or (M3) with appropriate isocyanate compounds in ethanol as a solvent 5 - Synthesis of formamide derivatives (M26 , M27) by the reaction of compound (M1) or (M3) with formic acid . 6 - Synthesis of new derivatives containing hetrocyclic compounds (M28 - M34) by the reaction of compound (M1) with thiol compounds . 7 - Synthesis of derivatives (M35) by the reaction of starting material with diethylmalonate . 8 - Synthesis of tetrazine derivatives (M36 , M37) by the reaction of compound (M1) with thiosemicarbazide or (CS2) and hydrazine in the presence of potassium hydroxide . 9 - Synthesis of derivative (M38) by the reaction of coumarine with semicarbazidehydrochloride in pyridine as a solvent. 10 - Synthesis of thiadiazole derivative (M39) by the reaction of coumarine with 2 - amino - 5 - hydrazino thiadiazol . 11 - Synthesis of chalcones (M40 - M42) by the reaction of compound (M1) with appropriate aromatic aldehydes in the presence of potassium hydroxide

تحضير غشاء ال PVC لتقطير الفراغي بالاغشية والترشيح الدقيق جدا عن طريق التطعيم مع PEA وPVP كمضافات == Preparation of PVC membrane for Vacuum membrane distillation and nanofiltration by grafting with PEA and PVP as additives

Author name: منال افهم توما الصائغ
Supervisor name: طارق سهيل نجم | قصي فاضل الصالحي
General topic: Chemistry
Specific topic: Chemistry
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: The present work divided in to two parts, in the first part; hydrophobic modification of polyvinyl chloride (PVC) was performed with the introduction of ethyl acrylate (EA) monomer onto the polymer backbone by free radical graft copolymerization with Benzoylperoxid as initiator. The effect of grafted copolymerization reaction time (1.5 - 4.5h), and monomer concentration (0.3 - 1.3M) on polymerization yield was evaluated. Mechanism described the free radical graft copolymerization was proposed. Membranes from PVC and grafted PVC solutions were prepared via immersion precipitation process for vacuum membrane distillation (VMD) application. The success of EA grafting onto PVC was confirmed by Fourier - transform infrared (FTIR) spectroscopy, and energy - dispersive X - ray spectroscopy (EDX). The membranes were characterized by scanning electron microscopy (SEM) analysis, and measurements of contact angle, thickness, pore size, and porosity. Fourier - transform infrared (FTIR) data showed that the PVC - g - PEA displayed new absorption peaks indicated the introduction of the EA ester group on PVC. A significant difference between the spectrum of the PVC and PVC - g - PEA in the peak of chlorine and carbon was observed by using EDX analysis. The EA grafting onto PVC could affect the structural morphology of the PVC - g - PEA membranes by increasing percentage of porosity and the largest pore size, the contact angle of the prepared membranes, and also by reducing membrane thickness. According to the results of VMD on distilled water, the permeate flux of the modified membrane was improved by about 15 times compared to the unmodified PVC membrane. The highest permeate flux of theAbstractmodified membrane was about 41 kg/m2h at 60°C of feed temperature and 2 mbar of vacuum pressure. In the second part; hydrophilic physically modified polyvinyl chloride (PVC) was established by blending of polyvinyl chloride (PVC) and polyvinyl pyrrolidone (PVP). The Nanofiltration flat sheet membranes prepared from different concentrations of PVC (i.e., 18, 20, 22 and 24 wt.%) with 3wt.% PVP - 90k as a polymer additive via immersion precipitation method was carried out. The resulted membranes were characterized by scanning electron microscope (SEM) observations, atomic force microscopy (AFM), Fourier - Transform infrared (FTIR) spectroscopy, thickness, contact angle measurement, mechanical test, pore size and porosity. Nanofiltration process is applied to evaluate the performance of the membranes with distilled water and 0.6M NaCl solution at different; pressure (10 - 18 bar), flow rate (150 - 450 l/min) and feed temperature (25 - 35oC). The results showed that with increasing of PVC concentration in present of 3% PVP additive increases the Young’s Modulus from 147.87 MPa to 242.13 MPa, strength at Break from 5.06MPa to 7.37 MPa, Elongation at break from 26.24% to 54.95 % and hydrophilicity from 83.0% to 60.0 % while decreased porosity from 82.85% to73.04%, Equilibrium Water Content (EWC) from 85.0% to 63.5%andpore size from 0.13μm to 0.07 μm. The water flux increased when increasing flow rate, pressure and temperature but decreased with increasing PVC concentration while the NaCl rejection decreased with increasing pressure, temperature and PVC concentration.

دراسة امتزاز ترايبروليدين وميتوكلوبرامايد هيدروكلورايد على سطوح البنتونايت والكاؤولين == A STUDY OF ADSORPTION OF TRIPROLIDINE AND METOCLOPRAMIDE HYDROCHLORIDE ON BENTONITE AND KAOLIN SURFACES

Author name: مدير مبارك ميرزا رحيم الدلوي
Supervisor name: يوسف كاظم عبد الامير
General topic: Chemistry
Specific topic: Chemistry
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: يتناول هذا البحث دراسة امتزاز المادتين الدوائيتين (Triprolidine.HCl) و(Metoclopramide.HCl) على اسطح اطيان البنتونايت والكاؤولين المتوافرة محليا في العراق ، وذلك بهدف التوصل الى معرفة فعالية هذه السطوح وامكانية استخدامها كترياقات فيزيائية لمعالجة حالات التسمم بهاتين المادتين الدوائيتين اذا تمﱠ تعاطيها بجرعات تفوق جرعاتها الاعتيادية . وتم استخدام مطيافية الاشعة المرئية فوق البنفسجية في تعيين سعات الامتزاز ، وبرسم العلاقة بين كمية المادة الممتزة والتركيز عند الاتزان تم التعرف على ايزوثيرمات الامتزاز في ظروف مختلفة من درجات حرارية ، شدة ايونية ، دالة حامضية ، حجم دقائق ووزن السطح الماز .بينت الدراسة النتائج الاتية : - • ان شكل الايزوثيرم الذي تم التوصل اليه ان مادتي (Triprolidine.HCl) و(Metoclopramide.HCl) على كلا السطحين يتبعان معادلة فريندلش في جميع الظروف، ومن النوع المنحني (S) حسب تصنيف (Giles) .• اظهر البنتونايت قابلية اعلى من الكاؤولين في امتزاز المادتين الدوائيتين المذكورتين، ولم يتغير هذا الترتيب في الفعالية مع تغير ظروف عملية الامتزاز .• دراسة عملية الامتزاز بدرجات حرارية مختلفة (10 , 25 , 37.5 , 45 )، اظهرت النتائج ان كمية امتزاز المادتين الدوائيتين على سطحي البنتونايت والكاؤولين تقل بزيادة درجة الحرارة (اي ان العملية باعثة للحرارة) .• ومن خلال ايزوثيرمات الامتزاز تم حساب التغيرفي قيم الثرموديناميكية الاساسية لعملية الامتزاز ، كالانثالبي ( )، وطاقة كبس الحرة ( )، والانتروبي ( )، واستخدامها في تفسير النتائج .• درس تاثير الشدة الايونية على امتزاز المادتين الدوائيتين على السطحين (باستخدام تراكيز مختلفة من ملح (NaCl)) وجد ان كمية المادة الدوائية الممتزة على السطحين تقل بزيادة الشدة الايونية .• مع زيادة حامضية المحلول ، تقل كمية الامتزاز للمادة الدوائية (Metoclopramide.HCl) على كلا السطحين ، ويزداد امتزاز المادة الدوائية (Triprolidine.HCl) على سطح الكاؤولين وتقل على سطح البنتونايت . • ان كمية المادة الممتزة تقل بزيادة حجم دقائق الطين ، اي بنقصان المساحة السطحية .• واخيرا تمت دراسة تاثير التوليف (عملية خلط السطحين) على المادتين الدوائيتين ،فقد كانت النتائج باتجاه تحسين عملية امتزاز المادتين الدوائيتين في بعض الحالات | This research is concerned with the study of adsorption of (Triprolidin.HCl and Metoclopramide.HCl) on the Surfaces of Bentonite and Kaolin which are provided locally in Iraq .The purpose of the study is to investigate the capability of these clays to used as antidotes in treatment of poisoning by the above drugs if taken in quantities higher than the recommended dosages .The UV - Vis. Spectrophotometry has been utilized for the determination of the adsorption capacities , the relation between the amount of the adsorbate (drug) and the equilibrium concentraction gives the adsorption isotherm of different conditions The influence of temperature , Ionic Strength , pH , particles size and adsorbent weight on adsorption isotherm have been studied. This study exhibited the following results : • The shape of the isotherm obtained from the adsorption of (Triprolidin.HCl and Metoclopramide.HCl) on both clays found to be comparable in all cases to the freundich equation and was similar to (s) type according toGiles classification .• Ability of the two clay surfaces to adsorb two drugs is in the following order : Bentonite > KaolinThis sequence in activity of the surfaces remained unchanged as the adsorption condition changed .• The adsorption phenomenon on two clay surfaces was studied at different temperatures (10, 25 , 37.5 , 45 ) .The results of the adsorption of two drugs on these Clays were showed an decrease with increasing temperature (exothermic process).• The thermodynamic functions , enthalpy change ( ) , Gibbs free energy change ( ) and entropy change ( ) were estimated and utilized in the interpretation of the results .• The study of ionic strength effect on adsorption of two drugs on these clays by using (NaCl) solution showed an decrease in adsorption quantity on Bentonite and Kaolin surface with increasing ionic strength .• the adsorption of Metoclopramide.HCl on two clays surfaces have decreased as the acidity of solution increased , but Triprolidine.HCl on Kaolin surface has increased as the acidity of solution increased , and decreased on Bentonite surface.• The particle size effect on the adsorption of two drugs were also studied and it was found that increasing the particle size of the adsorbents leads to decrease in the adsorption as a result of surface area decrease .• The study of the synergism effect (mixing two surfaces process) may be enhanced the adsorption process of the two drugs

تقدير المواد الحافظة في بعض المستحضرات الصيدلانية باستعمال الاستخلاص بالطور الصلب == Determination Of Preservative Compounds In Some Pharmaceutical Preparations Using Solid Phase Extraction

Author name: محمد هادي صنكور
Supervisor name: سلام عباس حسن العامري
General topic: Chemistry
Specific topic: Chemistry
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: استخدمت طريقة الاستخلاص بالطور الصلب باستعمال الراتنجات الشبكية العيانية Amberlite XAD - 8 والراتنج Amberlite XAD - 2 لتقدير اربع من المركبات الفينولية المستعملة كمواد حافظة في بعض المستحضرات الصيدلانية. تم دراسة الظروف الفضلى للطريقة المقترحة من خلال دراسة متغيرات الدالة الحامضية وزمن الاستخلاص ونوع المذيب الافضل لعملية الابتزاز واظهرت النتائج ان الظروف الفضلى للامتزاز او للاستخلاص تتمثل في دالة حامضية تساوي 3, وفي زمن استخلاص مقداره 15 دقيقة مع استخدام الاسيتوناترايل كافضل مذيب لاسترجاع وابتزاز هذه المركبات الفينولية الحافظة الاربع من الراتنجات مقارنة بالمذيبات الاخرى وعند زمن توازن مقداره 15 دقيقة. تم اجراء حسابات قيم معامل التوزيع (kd) وبطريقة الدفعات لمعرفة سلوك وامكانية الراتنجات الشبكية العيانية Amberlite XAD - 8 وAmberlite XAD - 2 لانجاز كل من عملية الامتزاز والابتزاز للمواد الفينولية الحافظة الاربع. اظهرت النتائج كفاءة وسرعة عالية لاستخلاص وامتزاز المواد الفينولية الحافظة من لدن الراتنجات الشبكية العيانية Amberlite XAD - 8 وAmberlite XAD - 2 مع وجود افضلية بسيطة للراتنج Amberlite XAD - 8 مقارنة مع الراتنج الاخر. لايجاد ولدراسة الدقة والضبط للطريقة قيد الدراسة تم تحضير 5 عينات تخليقية مختبرية لكل من مثيل بارابين والميتا كريسول بتركيز 20 ملغم.لتر - 1 , واظهرت نتائج تحليل العينات المختبرية وفق الطريقة المقترحة وجود معدل خطا مطلق ضمن مدى - 0.28 الى - 0.5 , ومعدل خطا نسبي مئوي ضمن مدى - 1.4 الى - 2.5 % واعطت النتائج انحراف معياري مقداره 0.0591 وانحراف معياري نسبي مئوي لايزيد عن 0.506%. تم تطبيق الطريقة المقترحة على بعض المستحضرات الصيدلانية التجارية للتحقق من تركيز المواد الحافظة فيها لضمان سلامة المنتج اولا بوجود هذه المواد والتحقق من وجودة ضمن مدى التركيز الذي لايؤثر على صحة المرضى, حيث تم تقدير المثيل بارابين في دواء ليدوكائين واظهرت النتائج ان تركيز المثيل باربين في الدواء ضمن مدى 977 - 985 ملغم.لتر - 1 وهو اقل قليلا من التركيز المثبت في المحتوى الاصلي للمنتج, وكذلك تم تقدير الميتا كريسول في حقن الانسولين واظهرت النتائج ان تركيز الميتا كريسول في المستحضر الدوائي ضمن مدى 2415 - 2535 ملغم.لتر - 1 وهو متوافق مع التركيز المثبت في المنتتج الاصلي. | Solid - phase extraction method using Amberlite XAD - 8 and Amberlite XAD - 2 resins is used to estimate of phenolic compounds as preservatives in some pharmaceutical preparations.To find the optimal conditions of the proposed method, several parameters and variables was studied, including; pH or acidic function, time of extraction and type of elution solvent . The results show that the optimum conditions of adsorption or extraction at pH equal to 3, at 15 minutes equilibrium time, and acetonitrile was the greatest solvent for elution or stripping these compounds from the resins compared with other solvent at equilibration time not exceed 15 minutes too. Distribution Coefficient values (kd) was applied to estimate and study the behavior and efficiency of the macroscopic resins Amberlite XAD - 8 and Amberlite XAD - 2 to the process of adsorption and desorption phenolic preservatives. The results showed high efficiency and speed of extraction and adsorption of phenolic preservatives by macroscopic resin Amberlite XAD - 8 and Amberlite XAD - 2 with a simple advantage for resin Amberlite XAD - 8. To find the accuracy and precision of the proposed method , five synthetic laboratory samples were prepared for each of the methyl paraben and meta - cresol, the results of the samples analysis in accordance with the proposed method showed that the existence of absolute error rate within the range of - 0.28 to - 0.5, and the rate of relative error percentage within the range of - 1.4 to - 2.5% .The results gave a standard deviation of 0.0591 and a standard deviation relative percentage of no more than 0.506%.The proposed method was applied on some pharmaceuticals samples to estimate and confirm the actual concentration of preservative concentration to remain this product active and did not cause any problem for patients. The actual concentration of methyl paraben in lidocaine drug found to be in the range (977 - 985) mg.L - 1 which is negligible less than that the amount installed in the original product. While the meta - cresol concentration in insulin preparation was found to be in the range (2415 - 2535) (977 - 985) mg.L - 1 which is actually equal to the amount of meta - cresol in the original product.

تحضير ودراسة الواح الخلية القاعدية (نيكل - كادميوم) باستخدام طريقة التلبيد == Preparing and studying of the alkaline cell plates (Nickel - Cadmium) by using of sintering method

Author name: محمد عدنان محمد نجم
Supervisor name: عماد فاضل الجبوري
General topic: Chemistry
Specific topic: Chemistry
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: تم تلبيد النيكل باستخدام حجم حبيبات (40، 125) مايكروميتر في درجة حرارة 650م والكادميوم باستخدام حجم حبيبات (53، 100، 150) مايكروميتر في درجة 175م ووجد الزمن الامثل للحصول على الواح وهو (60) دقيقة، وجرت عملية التلبيد في جو خامل من غاز النيتروجين حيث تم الحصول على الواح درست خصائصها ووجدت بانها متشابهة لكل من النيكل والكادميوم، فالنفاذية الظاهرية تقل بزيادة النسبة المئوية لزيادة الوزن بعد وضع اللوح الملبد في محلول ملحه، وتزداد بزيادة حجم الحبيبات والمقاومة الكهربائية تزداد مع زيادة حجم الحبيبات وزيادة النفاذية الظاهرية والقوى الميكانيكية تقل مع زيادة حجم الحبيبات وزيادة النفاذية الظاهرية، وزيادة القوة الميكانيكية تؤدي الى نقصان المقاومة الكهربائية، وبما ان الهدف من عمليات التلبيد هو استخدام الواح النيكل والكادميوم كاقطاب خلية (Ni - Cd) القاعدية وخصائص الواح هذه الخلية هي ان تكون عالية النفاذية مما يحتم تقليل الفترة الزمنية التي يوضع فيها اللوح في محلول ملحه واستخدام حجم حبيبات مناسب للحصول على احسن نفاذية غير ان المقاومة الكهربائية التي يجب ان تكون قليلة في هذه الالواح تزداد بزيادة النفاذية وحجم الحبيبات اي عكس ما هو مطلوب، وكذلك القوة الميكانيكية فالمطلوب ان تكون عالية. وعليه كان يجب ان تكون العملية توفيقية للحصول على افضل الخصائص. | Nickel plates was sintered by using grain size of (40, 125) m, at a temperature of 650C while cadmium plates was sintered by using grain size of (53, 100, 150) m at temperature of 175C. The properties of these plates were studied. Sintering time was 60 minutes for both. The sintering processes were carried out under inert N2 gas atmosphere. All properties studied were simillar for cadmium & Nickel the apparent porosity decreased as the percentage of weight gained (after impregnation of the plates in a solution of its salt) increased, but it increased as the grain size increased. Electric specific resistivity increased as the grain size & porosity increased. The mechanical strength decreased as the grain size & porosity increased. Increasing the mechanical strength led to decreasing the electrical specific resistance. The main goal of the sintering processes was to use the plates as electrodes in the alkaline (Ni - Cd) cell & the characteristics of the plates of these cells are of high porosity, therefore, we have to decrease the impregnation time and use the proper grain size to get a higher porosity but the electrical specific resistance which has to be low for these cells increases as the porosity & grain size increases. i.e against what is aimed. Also the mechanical strength which has to be high, it decreases as the porosity & grain size increases. So there has to be a compromise to get the best properties.

استخدام الزيوت التالفة كسطح ماز لازالة الملوثات الفينولية من المياه وذلك باستخدام البورسلين كسطح ساند صلب == Use of waste oil coating on a porcelian surface as adsorbent for the removal of phenolic contaminants from water

Author name: محمد حكمت حسين
Supervisor name: جميل موسى ضباب
General topic: Chemistry
Specific topic: Chemistry
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: يتناول موضوع هذه الرسالة استخدام طريقتين جديدتين لتحميل البورسلينات كسطح ماز واستخدامهما لازالة واغناء (preconcentration) بعض الملوثات الفينولية من المياه الملوثة حيث عولجت البورسلينات بواسطة زيت المحركات المطروح (waste engine oil)) ) بطريقتين : 1 - التحميل باستخدام التصعيد : اخذ 5)) غم من البورسلينات مع (10) غم من زيت المحركات المطروح (المستعمل) وسخن باستخدام جهاز التصعيد لمدة (24) ساعة عند درجة حرارة 235Cͦ بعد ذلك رشح ثم غسل باستعمال الكلوروفورم والايثانول, واخيرا بالماء المقطر للتخلص من المذيبات العضوية ، ووضع في الفرن لمدة ثلاث ساعات عند درجة حرارة(130مº) ,وثم غسل ببعض المذيبات واخيرا بالماء المقطر لحين التخلص من المذيبات ، واكدت نظافة السطح المحور بقياس طيف الاشعة فوق البنفسجية - المرئية لمحلول الغسل والتاكد من عدم ظهور اي حزمة او قمة امتصاص2 - التحميل باستخدام التكسير الحراري : اخذ 10)) غم من المادة الساندة مع (20) غم من زيت المحركات المطروح او المستعمل وسخنت المحتويات وفق برنامج حراري يتضمن رفع درجة الحرارة 100م° كل ربع ساعة وصولا الى درجة 600 م° ليبقى النموذج لمدة ساعة كاملة في الفرن ، بعد ذلك غسل بالكلوروفورم والايثانول للتخلص من الشوائب العضوية واخيرا بالماء المقطر درست الظروف التي تؤثر على عملية الامتزاز مثل الدالة الحامضية PH ، وزمن التماس ، وكمية المادة المازة ، حجم المادة المازة ، والتركيز الابتدائي ودرجة الحرارة حيث كانت الدالة الحامضية pH=2 وزمن التماس 115 دقيقة للفينول 150 دقيقة للباراكلوروفينول والباروامينوفينول ووزن المادة المازة 2.5 ,1.5 غم على التوالي للبورسلينات المحملة بطريقة التصعيد والتكسير الحراري وحجم المادة المازة 300 µm طبقت هذه الظروف على جميع النماذج بتركيز 25 mg\L.حيث اوضحت النتائج بعد تطبيق الظروف المثلى لعملية الامتزاز انها تتبع الترتيب الاتي من حيث كفاءة امتزازهاPhenol > P - Chlorophenol > p - aminophenolواستخدمت مطيافية الاشعة فوق البنفسجية - المرئية في تعيين ايزوثيرمات الامتزاز ، وبينت النتائج ان ايزوثيرمات الامتزاز تتبع معادلة فريندلش للامتزاز ثم معادلة لانكماير.حيث كانت قيمة0.46,1.38 = n, kf و0.41,1.35 و0.38,1.53 وقيمة معادلة الارتباط R2 0.9908,0.9986,0.9983 على التوالي للفينول والبارا كلوروفينول والبارا امينوفينول على سطح البورسلينات المحملة بطريقة التصعيد.اما على سطح البورسلينات المحملة باستخدام التكسير الحراري فان قيمة = n,kf 0.29،0.276 , 1.25،0.274 , 1.29،1.39 وقيمة معامل الارتباط R2 0.9853، 0.9905 ،0.9936 للفينول والبارا كلوروفينول والبارا امينوفينول على التوالي, وقد بينت الدراسات الثرمودنياميكية ان العملية باعثة للحرارة من قيم ∆Hͦ السالبة وتلقائية من القيم السالبة ∆G في حين دلت القيم السالبة للـ ∆S ان المركبات الممتزة التي تكونت اكثر انتظاما على السطح.وتضمنت الدراسة ايضا اجراء التطبيق العلمي على استخدام البورسلين المحمل بطريقة التصعيد لعملية اغناء المحلول (preconcentration) حيث صنع خرطوش جديد من البولي اثلين مشابه الى الخرطوش التجاري وحصلنا على هذه النتائج وقورنت مع الخرطوش التجاري octadecyl (C18) SPE, حيث عبئ بوزن2.5غرام من البورسلين المحمل بطريقة التصعيد ذات الحجم الحبيبي 50تشبك ,ونشطنا كليهما باستخدام الاسيتونايترايل والايثانول اذ حقنت مرات عدة للتخلص من الشوائب الموجودة وفتح المسامات للمادة المستشربة .بعد ذلك حمل النموذج اذ اخذ 25 مل من المحلول ذات الدالة الحامضية pH=2)) وتركيز 3مغم لتر - 1 وكان زمن ظهور اول قطرة للخرطوش الجديد المحضر 52 ثانية وزمن ظهور اول قطرة للخرطوش التجاري (C18) 62 ثانية, فيما كانت سرعة الجريان للخرطوش المحضر 1.736 مل دقيقة - 1 ولخرطوش (C18) 1.623 مل دقيقة - 1.بعد الانتهاء من عملية تحميل النموذج وغسل كلا الخرطوشين بالماء المقطر لمرات عدة للتخلص من المواد المتداخلة وجعل الوسط متعادل ولاسترداد العينة اخذ 4mlمن مذيبات عضوية متفاوتة في القطبية لاسترداد العينة خلال مدد زمنية مختلفة (5,10,15and 30 min) . | In this study, a novel modified porcelain surface and its characterization as adsorbent for the removal and preconcentration of some organic pollutants was investigated. A grinded porcelain powder was treated with waste engine oil using the following two methods : 1 - A Reflux Method : A grinded porcelain powder of 5g was mixed with 10g of waste engine oil (as a stationary phase on the supporting porcelain powder), the waste engine oil was collected from a local auto repair workshop. The mixture was then refluxed for 24hrs at 235C. The product was filtered, washed with organic solvent and then with distilled water to get rid of the residual organic solvents. This process was carried out several times using fresh solvent each time until the UV - Vis spectra were identical with that of the pure solvent, to make sure that no absorption peak interferes in the interested region of measurements. 2 - A Thermal Cracking Method : A grinded porcelain powder of 10g was mixed with 20g of the waste engine oil, the mixture temperature was raised 100C stepwise each 15min to 600C. The sample was kept for another one hour in the oven at the final temperature. Subsequently, it washed with chloroform, ethanol and finally with distilled water to get rid of the remaining organic solvents.The modified adsorbent was first used for the removal of phenol and substituted phenols from wastewater and the optimal experimental condition were as follows : pH (2), time (115 min for phenol; 150min for ρ - chlorophenol and ρ - aminophenol), weight of adsorbents (1.5, 2.5g) for modified porcelain surface using reflux and thermal cracking method, respectively, particle size (300µm), initial adsorbate concentration (2.5 - 25mg/L) and temperature (25°C). The efficiency of removal was in order of : phenol> ρ - chlorophenol> ρ - aminophenol. The preliminary study has shown that Freundlich isotherm model provided a better fit with experimental data than Langmuir and Temkin models. Based upon the first model, the experimental data were evaluated for both applied methods. The empirical constants ( Kf and n) were 0.46; 1.38, 0.41; 1.35, and 0.38; 1.53, and the correlation coefficient R2 were 0.9983, 0.9986 and 0.9908 for phenol, ρ - chlorophenol and ρ - aminophenol, respectively, using the reflux method. Whereas, conducting thermal cracking method resulted in empirical constants of 0.29; 1.25, 0.276; 1.29, and 0.274; 1.39, and correlation coefficient R2 of 0.9853, 0.9905 and 0.9936 for phenol, ρ - chlorophenol and ρ - aminophenol respectively. Furthermore, the thermodynamic studies of the developed methods showed that the adsorption process is exothermic and spontaneous based on the negative values of ΔH° and ΔG° respectively, while the negative value of ΔS° is associated with an increase in system order (less random system). A preliminary study was carried out to use the prepared adsorbent for the analytical purposes, in an attempt to extract and preconcentrate of toxic phenols by performing of homemade cartridge from the modified porcelain The cartridge is made from molded polyethylene “syringe - barrel body” similar to those of commercial SPE columns. The cartridge is packed with 2.5g, particle size of 300μm (50 mesh), of the modified porcelain sorbent prepared as described before. A sample of 3mg/L at pH2 was loaded on both cartridges, homemade and commercial SPE, and found that the elution time was 53sec and 62sec with flow rate of 1.623ml/min and 1.736ml/min, respectively
1 ... 66 67 68 69 70 ... 132