Show: 25 50 75 100 Results

Search results: 25 out of 111

تاثير اضافة مادة البايركس على بعض الخصائص الفيزيائية لمادة البورسيلن == Influence of Pyrex Addition on Some Physical Properties of Porcelain Material

Author name: عمر عدنان جاسم
Supervisor name: كريم علي جاسم | سوسن عبد الحسين مهدي
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: This study was carried out to prepare a porcelain samples of raw material 50 wt % kaolin dukhla, 25 wt % erzma sand glass and 25 wt% feldspar, boro silicate glass (Pyrex) used as a flux in the porcelain (ceramic) body, instead of feldspar, yielding a new material which has new properties with grain size equal to 53μ.Pyrex which was added to the porcelain to get the mixtures of sample. The all mixtures prepared and 10 wt % of distilled water was added, the resulting blends were die pressed of 25 MPa, to produce specimens with diameter of 25 mm and thickness of 5 mm, then they were dried and sintered for different temperatures (1200, 1250, and 1300) C° for 1 hour in an electric furnace. Physical properties measurements such as density, porosity, water absorption and length shrinkage percentage, were carried out, also mechanical properties (compression strength) and thermal properties. (Thermal conductivity and heat capacity) were measured The result of the physical properties measurement are found to be improved at increasing the ratio of Pyrex mixture, such as increase in density and shrinkage which a company with the decrease of porosity and water absorption, also the same changes were happened for these properties with increasing sintering temperature for all mixtures, and the highest increment in shrinkage have been shown at 1250 C°.The thermal conductivity and heat capacity have increased the ratio of Pyrex mixture, and there are small increment in these measurements, at increasing temperature for mixtures 3 and 4, but the increment is high for mixture no. (2).The results of mechanical properties measurements (diametrical strength) are found to be improved and increased at the increase of the ratio of Pyrex mixture and the mixture no. (3) have a highest strength. Also this improvement and increment in strength was continued for mixtures 2 and 3, with the increase of the sintering temperature whereas decreases for mixture (4) improvement in physical and mechanical properties for a new porcelain make suit usage in brick walls industry (porcelain tiles).

تاثير اضافة Al2O على الخصائص الكهربائية للفارستور من نوع ZnO == The Effect of (Al2O3) Additive on Electrical Properties of (ZnO) - Based Varistor

Author name: عباس فاضل شنون
Supervisor name: ايسر جمعة ابراهيم
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: ZnO based varistor samples having composition formela as shown below : - (X) is a variable take values (X = 0 , 0.1 , 0.5 , 1) % mol were prepared by a solid state reaction and sintered in air at a different sintering temperatures (1000,1100 and 1200)ᴼC for 2h by a heating rate of (5ᴼC. min - 1). The microstructure and electrical properties of sintered samples were investigated by using X - ray diffraction (XRD), energy dispersive spectroscopy (EDX), scanning electron microscopy (SEM), as well as electrical meas urements. XRD analyses showed that the crystallite size was decreased with the increase of Al2O3 concentration while it was increased with the increase of sintering temperature. Also from SEM images and by using linear intercept method we note that the grain size decreases with the increase of Al2O3 concentration while it increases with the increase of sintering temperature. Since the breakdown voltage is influenced by the size and the number of grains , so it was increased with the increase of Al2O3 concentration at certain sintering temperature to reach (2220V) at sample contains (1% of Al2O3) and sintered at 1000ᴼC for 2h, this is due to form a spinal phase (ZnAl2O4) which inhibits the grain growth.Also the breakdown voltage was decreased with the increase of sintering temperature at certain Al2O3 concentration to reach (255V) at sample sintered at 1200ᴼC for 2h and contains (0.1% l of Al2O3).By plotting the (J - E) curves of varistor samples we can notes that the adding of (0.1 and 0.5) % of Al2O3 dopants enhances the nonlinear behavior of ZnO varistor by increasing the nonlinear coefficient to reach its maximum values (46, 48) respectively which are sintered at 1000ᴼC for 2h, while the increase of Al2O3 concentration to(1% ) decreases the nonlinear coefficient to (29.2) which are sintered at 1000ᴼC for 2h .Compound ZnO Bi2O3 Sb2O3 CoO MnO2 Cr2O3 Al2O3 % mol 96.5 - X 0.7 1 0.8 0.5 0.5 X The increase of sintering temperature decreases the nonlinear coefficient to reach its minimum values (6.9, 8) at samples sintered at 1200ᴼC for 2h and contain a different amounts of Al2O3 concentration, this is due to the bad volatilization of bismuth that insured by (EDX) test.The leakage current was increased with the increase of both Al2O3 concentration and sintering temperature to reach its maximum value (0.33mA) at a sample which contains (1% ) of Al2O3 concentration and sintered at 1200ᴼC for 2h, that is because the Aluminum increases the free electrons (donor density ) at the conduction band.Deilectric constant decreases with the increase of the frequancy of the applied voltage for the samples which containe 0.1% of Al2O3 and sintered at (1000 and 1200)ᴼC for 2h and for the sample contain 1% of Al2O3 and sintered at 1000ᴼC, the deilectric constant decreases with the increase of sintering temperature while tangent factor increases with the increase of Al2O3 concentration, this is due to the increase of leakage current.

دراسة تاثير المذيب والحامضية على شدة الفلورة وعلى الخواص الطيفية لمحاليل الفلورسين == Study the Effect of Solvent and pH on the Fluorescence Intensity and Spectral Properties of Fluorescein Solutions

Author name: وليد خالد حمود
Supervisor name: وليد صلاح عبد الوهاب
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: تم دراسة وقياس اطياف الامتصاص والتهيج والفلورة لمركب (الفلورسين) المذاب في المذيبات القطبية ( الايثانول, الميثانول ,الاسيتون ترايل ,الدايمثيل فورماميد ,الدايمثيل سلفوكسيد)عند الطول الموجي المهيج ((λex=480nm وبدرجة حرارة الغرفة .حيث تــم دراســـــة تاثير قطبيــــة المذيبات اعلاه على شــــدة طيــــــف الفلورة عند التركيزين (10 - 4 مول/ لتر) و(10 - 5 مول / لتر) فقد وجد ان شدة طيف الفلورة تقل مع زيادة قطبية المذيب وكذلك وجود ازاحة لقمة طيف الفلورة باتجاه الطول لموجي الطويل (ازاحة حمراء ) بينما الشدة تزداد عند التراكيز المخففة (لنفس المذيب) مع الزيادة في قيمة ال(pH) ما عدا الايثانول بسبب تقارب قيمة ال (pH) مع تغير التركيز.وكذلك تم دراسة الخواص الطيفية لمحاليل الفلورسين ومنها الكفاءة الكمية التي تم حسابها.كما تــم دراســـة تاثير pHعلــى شـــــدة طيــف الفلورة عنـد التركيزين (10 - 4 مول/ لتر) و(10 - 5 مول / لتر) فقد لوحظ عند اضافة القاعدة (NaOH ) او الحامض (HCl)عند التركيز(10 - 4 مول/ لتر) بان شدة طيف الفلورة تزداد ثم تنخفض تدريجيا(عدا الاسيتون ترايل) وان هناك ازاحة لطيف الفلورة نحو الطول الموجي الطويل (ازاحة حمراء) تثبت تريجيا عند قيمة معينة . اما عند التركيز(10 - 5 مول / لتر) فقد لوحظ بان شدة طيف الفلورة تزداد تدريجيا مع زيادة قيمة الpH بعد اضافة القاعدة (NaOH) مع وجود ازاحة لطيف الفلورة نحو الطول الموجي الطويل (ازاحة حمراء). وقد تم حساب الكفاءة الكمية لكل قيم pH المحسوبة.ان انخفاض الشدة لطيف الفلورة قبل وبعد اضافة الحامض او القاعدة هو بسبب تاثير قطبية المذيب وبسبب تاثير قيمة pH ووجود صيغ الفلورسين السائدة (dianion) او(monoanion) في المحاليل التي تلعب دورا كبيرا في شدة طيف الفلورة وقيمة الكفاءة الكمية | The absorption ,excitation and fluorescence spectra for fluorescein compound which dissolves in polar solvents (methanol, ethanol, acetonitrile , dimethylformamide and dimethyl sulfoxide) at excitation wavelength (λex= 480 nm) at room temperature were measured and investigated. Studying the effect of above solvent on the fluorescence intensity with the concentrations[1x10 - 4M], [1x10 - 5M], and it has been found that the fluorescence intensity decreases with increasing polarity of solvent. Also, it is found that the fluorescence spectra was shifted toward the long wavelength (red shift ) while it is observed that the fluorescence intensity was increased at diluted concentrations (for the same solvent) with increasing pH values except at (ethanol) because of the convergence of the value (pH) with the change of concentration. Also, studied the spectral properties of the solutions (fluorescein) including quantum efficiency were calculated . Studying the effect of pH on fluorescence intensity at concentrations [1x10 - 4M],[1x10 - 5M], had been observed when adding the basic (NaOH) or acid (HCl) at concentration [1x10 - 4M]. The relative fluorescence intensity increases and then decreases gradually (except Acetonitrile) , and there is the fluorescence spectra which are more shifted toward the longer wavelength (red shift) fixed gradually at limited value. While at the concentration [1x10 - 5M] , it had been observed that the intensity of fluorescence spectrum is gradually increasing with the increase in the value of the pH after the addition of the base (NaOH) , with the shifted toward the longer wavelength (red shift), and the quantum efficiency was calculated for each pH values. The decreasing intensity of the fluorescence spectrum before and after the addition of the acid or the base due to the effect of the solvent polarity and the effect of pH value ,it is found (dianion) or (monoanion) form has been found prevailing in solutions which play a major role in the intensity of fluorescence spectrum efficiency and value of quantity

التهيج الالكتروني الناتج بواسطة حركة بروتون خلال الماء السائل والحمض النووي باستخدام نموذج درود وبين == ELECTRONIC EXCITATION PRODUCED BY PROTON MOVING INSIDE LIQUID WATER AND DNA USING DRUDE AND PENN MODEL

Author name: وسام عبد الله الطون الحمداني
Supervisor name: رياض خليل احمد العاني
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: لتشعيع الانظمة البايلوجية بحزم الطاقة الايونية عدة تطبيقات في الفيزياء الطبية وفي مجال الصحة في الفضاء, كالعلاج البروتوني للسسرطان او حماية رواد الفضاء من الاشعة الكونية. ولاجل السيطرة على التاثيرات الضارة للاشعاع في الانسجة الحية, وفهم هذه التاثيرات اصبح من الضروري تقديم وصف دقيق لفقدان الطاقة من الحزم الايونية في الهدف. استعمل في العمل الحالي ,صيغتا دالتي العزل درود Drude) ( وبينPenn) ) لحساب احتمالية قيام البروتون بانتاج تهيجا الكترونيا في هدفين حيويا بايلوجيا, هما الماء H_2 O)) والحمض النووي DNA)). وكذلك, فان تاثير الكسر الايوني للشحنه الفعالة لقدرة الايقاف الجزيئي (PSPEC) للماء (H_2 O) والحمض النووي DNA)) تم دراستها ماخوذا بنظر الاعتبار التهيج الالكتروني في الهدف. فقدان طاقة الايون يعتمد على نوع الاواصر في المركبات, حيث الحمض النووي ((DNA يتكون من اواصر مفرده وثنائيه وثلاثيه. وحيث ان في الحمض النووي DNA, كل قاعدة نايتروجينيه ترتبط بجزيئه سكر وجزيئة فوسفات. تدعى كل من القاعده والسكر والفوسفات بالنيوكليوتيد, بينما تتكون جزيئة الماء من ذرتي هيدروجين مرتبطته باصره تكافؤيه بذرة اوكسجين مفرده. لذا فهنالك حاجه لمزيد من الاهتمام بالبحث عن تاثير نوع الاصره على فقدان الطاقه. توصف الاستجابه الالكترونيه للهدف بداله خاصه لفقدان الطاقه ELF)), والتي توصف بعدة بصيغ تتطابق مع المعلومات التجريبة البصرية المتوفرة (عند الزخم الصفري المنتقل) ولكنها تستخدم تقريبات مختلفة للحصول على سطح بيثا لاجل توسيع دالة فقدان الطاقه ELF)) لاي طاقه او زخم منتقل. وقد تم الحصول على النتائج باستخدام البرنامج (Wesam - H - DNA. For) الذي كتب بلغه (فورتران90) لاجراء الحسابات العددية . قورنت نتائج العمل الحالي مع المعلومات التجريبيه المتوفرة وكانت مقبولة بشكل جيد في معظم الحالات. | The irradiation of biological systems by energetic ion beams has multiple applications in medical physics and space radiation health, such as hadrontherapy for cancer treatment or protection of astronauts against space radiation. Therefore, for a better control and understanding of the effects of radiation damage in living tissues, it is necessary to advance an accurate description of the energy loss from the ion beam to the target. In the present work the dielectric formalism Drude and Penn have been used to calculate the probability for an energetic proton to produce electronic excitations in two targets of high biological interest, namely, H_2 O and DNA. Also, the effects of ionization fraction of Partial Stopping Power Effective Charge (PSPEC) of H_2 O and DNA has been studied taking into consideration electronic excitation in the target. The proton energy loss strongly depends on the type of bonds in the compounds, where the DNA consists of single, double and triple. In the DNA, each nitrogen base is attached to a Sugar molecule and a Phosphate (P) molecule. Together, a base, sugar, and phosphate are called a nucleotide, while H_2 O has two Hydrogen atoms covalently bonded to a single Oxygen atom. There is a need to pay more attention to investigate the effect of kind of bond on energy loss. The electronic response of the target, characterized by its energy - loss function (ELF), is described by several models that fit the available experimental optical data (at zero momentum transfer), but use different approaches to obtain the Bethe surface, that is, to extend the (ELF) to any energy and momentum transferred. The results have been achieved by using the program (Wesam - H - DNA. for) wich is written in FORTRAN 90 using a software Computer Visual Fortran V6.6, which performed for the numerical calculation. The results of the present work are compared with the available experimental data; it was in good agreement with most cases.

دراسة الخواص الفيزيائية والميكانيكية لالواح البناء الجاهز المصنوعة من النفايات الورقية والزراعية == Preparation and Study of The Physical and Mechanical Properties for Ready Building Panels Made from Paper and Agricultural Dumps

Author name: نورة بلبول شويع
Supervisor name: عباس فاضل عيسى | محمد علي جابر
General topic: Physics
Degree: Master
Language: English
University location: Wasit
First pages:
Abstract: The investigation in this research use two types of polymers are polyvinyl acetate (PVA) and poly ol (PO) include mixed by (1 : 3) to obtain a polymer blend which has been used percentages (5%, 10%, 15%, 20%) to be mixed with cement, and old newspapers for the production of cement fiber board, where cut old newspapers and mixed with an electric mixer after the addition of a quantity of water (0.6), then drained, mixed with the polymer blend and added the remaining amount of water from the prescribed percentage ,added to it cement gradually .The mixture poured into certain molds and left to harden for 28 days and then cut off by the ASTM to study the physical and mechanical properties for the board had better specifications at any ratio of the polymer blend additive.the rice husks have been taken ,cleaned washed and dried for several days, grinded by volumetric fraction less than 600 micrometers. The powder added to the cement , mixed with the polymer blend and water by ratio 0.6 .The mixture poured into molds and left for 28 days and then cut off by international standard specifications to study the physical and mechanical properties to see any percentages is the best .The results that 10% of the polymer blend was the best ratios for the board which characterized by good specifications with 5% of old newspapers and rice husks, which used the fibers of oldVInewspaper after shredded and mixed with cement and the addition of the husks of rice milled at different rates for the best results and to obtain strong cement fiber board.These samples were made and cut according to standard specifications and for mechanical tests (such as flexural strength ,compressive strength and tensile strength) and physical properties (density, water absorption)and thermal properties (thermal conductivity and combustion resistance).The results were showed that the panels containing old newspaper 5% is better than others in terms of the physical ,mechanical and thermal properties in which were added of polymer blend 10% . The samples contained old newspapers , rice husks 5% and 10% of the polymer blend have the best results of which contain old newspaper with 5% silica and 10% of the polymer blend.

جهد الاستيقاظ للايونات المخترقة باستخدام نموذج الذرة المهتزة توافقيا == Wake - Potential of Penetrating Ions using Harmonic - Oscillator Atom

Author name: نبيل جنان بهنام فتوحي
Supervisor name: خالد عبد الوهاب احمد | عبد الله احمد رشيد
General topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: في الدراسة الحالية وصفت ظاهرة الاستيقاظ الناتجة بواسطة تفاعل البروتون في المواد الصلبة عند سرعة ثابتة υ . مادة الهدف اعتبرت كغاز الكتروني وتتميز خواص العزل لها ε(k,ω) . الدراسة تنطوي على ثلاث اقسام تعتمد على معادلة جهد الاستيقاظ التي تم تحليلها باستعمال نموذج المتذبذب التوافقي الكلاسيكي والكمي للبروتون المنتقل خلال اهداف من (كاربون، المنيوم ، نحاس) بالاحداثيات الاسطوانية (ρ,z) . فضلا عن تفاعل البروتون مع كرة نانوية درست بالاعتماد على نظرية الاستجابة للوسط العازل في الاحداثيات الكروية (r ,θ,φ) باستعمال اهداف من الالمنيوم والذهب .القسم الاول، حسابات جهد الاستيقاظ والقوى المستحثة للبروتون السريع المتحرك داخل الاهداف الصلبة درست باستعمال صيغ مختلفة من دوال العزل ، الطور العشوائي التقريبي ، درود - لورنس ودالة العزل الكمية .جهد الاستيقاظ ∅_W (ρ,z) لدالة العزل للطور العشوائي التقريبي اظهرت النتائج سلوك مخمد للتذبذبات في الاتجاه الطولي خلف الجسيم المقذوف، نمط هذه الاهتزازات يتناقص اسيا في الاتجاه العرضي بالاضافة الى ان جهد الاستيقاظ يمتد قليلا امام الجسيم المقذوف فضلا عن اعتماد كل من جهد الاستيقاظ والقوى الموقفة والجانبية على قيمة ومواقع الاحداثيات الاسطوانية (ρ,z) وسرعة البروتون υ ، ان عمق الجهد ∅_W (ρ,z) يزداد بزيادة الاحداثي ρ ،ايضا نلاحظ ان عمق جهد الاستيقاظ يتناسب عكسيا مع سرعة البروتون υ.تاثير ربط الالكترون على الجهد الاستيقاظ ∅_W (ρ,z) ، القوى الموقفة والقوى الجانبية الموصوفة بنسبة الكثافة الالكترونية 〖〖=ω〗_p〗^2⁄〖ω_0〗^2 10الى 0.1 تمت دراستها بصيغ دالة العزل درود - لورنس، ودالة العزل الكمية للغاز الالكتروني .النتائج اظهرت ان عمق جهد الاستيقاظ والقوى الموقفة والجانبية تقل (مع زيادة التذبذب للجهد)عندما تقل نسبة 〖ω_p〗^2⁄〖ω_0〗^2 من 10الى 0.1 .القسم الثاني، جهد الاستيقاظ V_Wake (z,ρ=0) والقوى الموقفةF_S (z,ρ=1) والجانبية F_ρ (z,ρ=1)، للمتذبذب التوافقي الكمي كدالة للسرعة υ(a.u) و((ω_p z)⁄υ)، النتائج اظهرت سعة التذبذب والتذبذبات للجهد والقوى تقل مع زيادة نسبة عامل الكثافة الالكترونية 〖ω_p〗^2⁄〖ω_0〗^2 من 0.1 الى 10 ، بينما بزيادة الطول الموجي فان تاثير ربط الالكترون يعتمد على قيمة كل من تردد البلازما ω_p والتردد الرنيني ω_0 .القسم الثالث، بينت النتائج العددية للبروتون المتحرك خارج كرة نانوية بسرعة ثابتة وموازية للمحور z العمل النظري بني على اساس نظرية الاستجابة لدالة العزل باستعمال دالة الطور العشوائي التقريبي . النتائج اشارت الى حدوث تذبذب لتاثيرات الاستيقاظ (wake effects) للغاز الالكتروني خلف الجسيم المقذوف وبشكل معاكس لاتجاه الحركة عند السطح الكروي . ان قمعا مميزا على شكل حرف V يظهر للجهد ∅_ind (r,θ,φ) كدالة الى الزوايا θ وφ . فضلا عن اعتماد قدرة الايقاف على موقع الشحنة z_∘ ، ولوحظت قيم سالبة لقدرة الايقاف عندما يقترب البروتون ببطيء من سطح الكرة النانوية . | The present work, discusses the wake phenomena produced by swift protons interaction with solids at the constant velocity. The target material modeled as an electron gas characterized by its dielectric properties ε(k,ω). The work implies three parts depended on wake potential equation , which have been analyzed using harmonic and quantum harmonic oscillator models for proton channeling through the targets like (C, Al and Cu) in the cylindrical coordinate system(ρ,z) . As well as the interaction, fast proton with a nanosphere is studied based on the dielectric response theory in spherical coordinates systems (r ,θ,φ) using targets (Al and Au). The first part, was the calculation of wake potential and induce forces for swift proton moving in the solid targets using various dielectric function formalisms, the random phase approximation (RPA) , the Drude - Lorentz and quantum dielectric function .Wake potential in the RPA dielectric function results exhibited a damped oscillatory behavior in the longitudinal direction behind the projectile; the pattern of these oscillations decreases exponentially in the transverse direction. In addition, the wake potential extends slightly ahead of the projectile, moreover wake potential, stopping and lateral forces depends on cylindrical coordinate value (ρ, z), as well as the proton velocity υ , the dip depth ∅_W (ρ,z) increases as the value of the coordinate ρ decreases , Also the depth of wake potential is observed to be inversely proportional to the proton velocity υ .The effect of electron binding on the wake potential ∅_W (ρ,z), stopping and lateral force , described by the ratio 〖ω_p〗^2⁄〖ω_0〗^2 =10 to 0.1, has been studied in Drude - Lorentz dielectric function and quantum dielectric function formalisms . The results showed that wake potential dip depth, stopping and lateral forces decreases (with more oscillations for potential) when the electron density ratio 〖ω_p〗^2⁄(〖ω_0〗^2.) decreases from 10 to 0.1, which achieved with previous work (P.Sigmund, 2011) The second part, wake potential V_Wake (z,ρ=0) , stopping force F_S (z,ρ=1) and lateral force F_ρ (z,ρ=1) ,in quantum harmonic oscillator plotted as a function of the velocity ion υ(a.u) and ((ω_p z)⁄υ) , The numerical calculations show that the amplitude of the oscillations increases and the oscillation potential and forces decreases with increasing electron density parameter(〖 ω〗_p^2)⁄(ω_0^2 ) from 0.1 to 10. While the wavelength increases, The effect of electron binding depends on the values of each of the plasma frequency ω_p and the resonance frequency ω_0 .The third part , numerical calculation of interaction of a proton flying outside nano - dielectric sphere with constant velocity parallel to z - axis, theoretical work based on the dielectric response theory using random phase approximation RPA dielectric function . The results indicate the oscillating wake effects occur in the electron gas behind the particle opposite to the particle motion at spherical surface. The typical V - shaped cone appearing when plotted wake potential ∅_ind (r,θ,φ)as a function of θ and φ. Moreover, the stopping power depends on the charge position z, and noticed that negative stopping power can be achieved as particle approaches to nano - dielectric sphere slowly.

دراسة تاثير اضافة اوكسيد الخارصين النانوي (ZnO) على الخواص الكهربائية للبولي ستايرين (PS) == Study the Addition effect of Nano Zinc oxide (ZnO) on the Electrical properties of Polystyrene (PS)

Author name: موسى محمد علي الموسوي
Supervisor name: بهاء حسين صالح ربيع المرعب
General topic: Physics
Degree: Higher Diploma
Language: Arabic
University location: Babylon
First pages:
Abstract: تم في هذا البحث تحضير متراكب (بولي ستايرين - اوكسيد الخارصين النانوي)(PS - ZnO) باستخدام طريقة الصب (Casting method) وبتراكيز مختلفة من المضاف( اوكسيد الخارصين النانوي ZnO) الى المادة الاساس (PS) . وقد تمت دراسة الخواص الكهربائية ( المتناوبة) لهذا المتراكب (PS - ZnO) اذ تم دراسة التالي : • تاثير تغير التركيز للمضاف في التوصيلية الكهربائية المتناوبة للمتراكب . • تاثير تغير تردد المجال الكهربائي المتناوب المسلط على الخصائص الكهربائية المتناوبة . • في ما يخص الخواص الكهربائية المتناوبة فان ثابت العزل الكهربائي والفقدان العزلي لمتراكب(PS - ZnO) فانهما ينقصان مع زيادة تردد المجال الكهربائي المسلط ويزدادان مع زيادة التركيز للمادة المضافة (ZnO) .• وكذلك فيما يخص بقية الخواص الكهربائية المتناوبة بينت النتائج ان التوصيلية الكهربائية المتناوبة للمتراكب (PS - ZnO) تزداد بزيادة تركيز المضاف (ZnO) للمادة الاساس(PS) , وكذلك تزداد زيادة كبيرة عند زيادة الترددات للمجال الكهربائي المسلط من 1KHz - 5MHz, وتزداد زيادة قليلة ( اشبه بالثابتة تقريبا) عند الترددات العالية هي ما فوق MHz 1.5.• بينت النتائج ان التوصيلية الكهربائية المتناوبة عند زيادة التركيز للمادة المضافة (ZnO) تصل توصيلية المتراكب الى حدود توصيلية المواد شبه الموصلة اي تصل الىΩ.cm) - 1) 10 - 8. | In the present work, the poly styrene - nano zinc oxide has been prepared by using casting method and in different concentrations of nano zinc oxide to the principal material. The alternative electrical properties of PS - ZnO composite has been studied such that The effect of change of concentration for added material or the alternative electrical conductivity for composite. The effect of change of frequency of alternative electric field and change of concentration of added material on the alternative electrical properties. The dielectric properties of PS - ZnO composite decrease with increasing of electric field frequency and increase with increasing of concentration of added material. The results show that the alternative electrical conductivity of PS - ZnO composite increase with increasing the concentration of added material (ZnO), also more increase with increasing the frequencies of electrical field from 1KHz - 5MHz and slow increase in high frequencies up to 1.5MHz.The results shows the alternative electrical conductivity approach to semiconductor conductivity when the added material concentration increase. (σA.C≈1E - 08) (Ω.CM) - 1

الخصائص الفيزيائية, الفعالية ضد البكتيريا والغشاء الحيوي لبوليمر بولي فينيل الكحولPVA مع صبغة السفرانين والبايوسورفكتنت == Physical Properties, Antibacterial and antibiofilm Activities of PVA Polymer with Safranin Dye and Biosurfactant

Author name: مهند سامي جليل
Supervisor name: محاسن فاضل هادي الكاظمي | جيهان عبد الستار سلمان
General topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: تم تحضير الاغشية بطريقة الصب لعدة اوزان ( 0.25، 0.5، 0.75، 1) غرام ولعدة اوزان جزيئية (14000،160000) غم \مول من بوليمر بولي فينيل الكحول وايضا لعدة نسب خلط من صبغة السفرانين (4، 8، 10، 12، 16، 20 ) مل ولعدة تراكيز (1×10 - 2، 1 ×10 - 3، 1× 10 - 4، 0.5×10 - 4، 1×10 - 5، 1×10 - 6 ) مول\لتر. تم دراسة الخصائص الفيزيائية والفعالية ضد البكتيرية لصبغة السفرانين، بوليمر بولي فينيل الكحول، بايوسرفكتنت واغشية (صبغة السفرانين، بايوسرفكتنت) المذابة في البوليمر. ايضا تم دراسة تاثير تغيير (الوزن والوزن الجزيئي لبولي فينيل الكحول، التركيز لصبغة السفرانين وتاثير نسبة الخلط لصبغة السفرانين \ بولي فينيل الكحول) على الخصائص الفيزيائية الضوئية والخصائص التركيبية. اختبارات الخصائص الفيزيائية الضوئية تتضمن اطياف الامتصاص والفلورة، فجوة الطاقة والثوابت البصرية . اختبارات الخصائص التركيبة لبوليمربولي فينيل الكحول، صبغة السفرانين واغشية سفرانين \ بولي فينيل الكحول تمت بعده طرق هي ( حيود الاشعة السينية XRD ، مجهر القوة الذرية AFM ، مجهر المسح الالكتروني(SEM) ، وتحويلات فورير للاشعة تحت الحمراء FTIR النتائج المتحققة توضح بان شدة اطياف الامتصاص والفلورة تزداد بزيادة تركيز صبغة السفرانين .تم حساب فجوة الطاقة لصبغة السفرانين وبولي فينيل الكحول ومقارنتها مع اغشية الصبغة المذابة في البوليمر وقد بينت النتائج الى نقصان فجوة الطاقة للصبغة والبوليمر بعد مزجهما مع بعض، كما ان فجوة الطاقة لاغشية السفرانين المذابة في البوليمر تقل بزيادة نسبة الخلط لصبغة السفرانين. تم دراسة كل الثوابت البصرية (معامل الامتصاص، معامل الخمود، معامل الانكسار، وثابت العزل الحقيقي والخيالي ).تم حساب معاملات الفلورة لكل النماذج وتبين بان افضل نتيجة لزمن العمر وزمن العمر الاشعاعي لصبغة السفرانين كانت عند التركيز( 0.5×10 - 4) مول \لتر في حين للاغشية الصبغة المذابة في البوليمر كانت عند نسبة الخلط 12 مل للصبغة وللوزن الجزيئي 14000 غم \ مول للبوليمر ونسبة خلط 4 مل للصبغة وللوزن الجزيئي 160000 غم \مول.تم اختبار الفعالية ضذ البكتيرية وضد الاغشية الحيوية لصبغة السفرانين، البايوسرفكتنت، بوليمر بولي فينيل الكحول واغشية ( صبغة السفرانين، بايوسرفكتنت) \ بولي فينيل الكحول لعدة اوزان جزيئية لبولي فينيل الكحول وعدة اوقات تجفيف وعدة بكتريا مرضية (Staphylococcus aureus and Pseudomonas aeruginosa ) ولنوعين من الاطباق ( بلاستك وزجاج ). ان افضل النتائج المتحققة كانت للبايوسرفكتنت المذاب في البوليمر والمصبوب للنوعين من الاطباق وللنوعين من البكتريا, بالنسبة للبكتيريا (Staphylococcus aureus) حصلنا على النتائج (98.70%,100.00%,) للاطباق البلاستك والزجاج على التوالي وللوزن الجزيئي 14000 غم\مول اما بالنسبة للبكتريا (Pseudomonas aeruginosa) حصلنا على النتائج (98.00% و97.70%) للاطباق البلاستك والزجاج على التوالي وللوزن الجزيئي 160000 غم \ مول | Films were prepared by casting method with different weights (0.25,0.5,0.75,1) g and different molecular weights (14000,160000) g/mol of PVA polymer and different doping ratio of Safranin dye (4,8,10,12,16,20) ml and different concentration (1x10 - 4,0.5x10 - 4,1x10 - 5,1x10 - 6) g/mol.The physical properties, antibacterial activity and antibiofilm of Safranin dye, polyvinyl alcohol (PVA) films, Biosurfactant and Safranin dye doped PVA films have been studied. Also study the effect of changing (the weights and molecular weights of PVA, the concentration of Safranin and doping ratio of Safranin dye doped in PVA films ) on photophysical and structural properties.Photophysical properties tests are including the parameters : - Absorption and fluorescence spectra, energy gap, and optical constants. Structural properties tests are investigate by methods (XRD, AFM, SEM and FTIR spectrum) for PVA polymer films, Safranin dye as solution and Safranin / PVA films. The achieved results illustrated that the intensity of absorption and fluorescence spectra of Safranin dye are increase as concentration increase. The energy gap for Safranin dye and PVA polymer has been calculated and compared with Safranin doped PVA polymer films that led to decrease energy gap of dye and polymer after doping together, the energy gap of Safranin / PVA films are decreasing as increasing doping ratio of Safranin. All optical constants (absorption coefficient, extinction coefficient, refractive index and real and imaginary dielectric constant) were studied.Fluorescence parameters for all samples will be calculated. The best lifetime and radiative lifetime for Safranin dye is for concentration 0.5x10 - 4 mol/liter while for Safranin dye doped PVA films is for 12 ml doping ratio for PVA Mw 14000 g/mol and 4ml doping ratio for PVA Mw 160000 g/mol .Antibacterial and Antibiofilm activity were tested for Safranin dye, Biosurfactant, PVA polymer and (Safranin, Biosurfactant / PVA ) films for different molecular weights of PVA, different drying time, different pathogenic bacteria (Staphylococcus aureus and Pseudomonas aeruginosa ) and different kind of plates ( plastic and glass). The best results achieved from the mixture Biosurfactant doped PVA casting in both Plates and for both pathogenic bacteria, the results for Staphylococcus aureus are (100.00%, 98.70%) for plastic and glass plates respectively and for molecular weight (14000 g/mol), while the results for Pseudomonas aeruginosa (98.00%, 97.70% ) for plastic and glass plates respectively and for molecular weight (160000 g/mol)

تحضير مركب من (النحاس - الكرافيت) ودراسة خواصه الكهربائية والميكانيكية والحرارية == (Copper - Graphite) composite preparation and studying it's electrical, mechanical and thermal properties.

Author name: مهدي محمود مطر
Supervisor name: فاضل عطية جياد | ابراهيم رمضان عاكول
General topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: في هذا العمل, تم تحضير مادة متراكبه من النحاس والكرافيت باستخدام طريقة مسحوق المعادن (powder metallurgy method) وتم دراسة خواصها الفيزياويه والميكانيكيه والكهربائيه والحراريه.نسب مختلفه من الكرافيت كانت (40%,30%,20%,10%,5%) تم اضافتها الى مسحوق النحاس,كل النسب خلطت بعنايه مع (2%) من وزن المركب مع بولي فينول الكحول (polyvinyl Alcohol) كرابط.النماذج شكلت على شكل عينات دائريه ,ثم كبست تحت ضغط (55) ميكا باسكال ومن ثم عولجت حراريا بعد وضعها في انابيب من الكوارتز مفرغه حيث وضعت في فرن بدرجة حراره (900) درجة مؤية لمدة (4) ساعات حيث كان معدل درجة التسخين والتبريد هي (4.5) درجة مؤية لكل دقيقة .الكثافة الحجمية(Bulk density ) ) والفجوات الضاهرية(Apparent porosity) ومقاومة البلي(Wear rate ) ومعامل الاحتكاك(Friction coefficient ) والممانعه الكهربائيه(electrical resistivity) والتوصيليه الحراريه(thermal conductivity) درست.حيث كانت الكثافة الحجمية (3.24 - 6.1)غرام لكل سنتميتر مكعب لكل النسب من الكرافيت والفجوات الضاهرية (13.816 - 8.768) غرام لكل سنتميتر مكعب وكذلك معدل البلي لمختلف الاحمال (5,10,15) نيوتن كان يقل مع زيادة محتوى الكرافيت في المركب حيث كان معدل البلي (2.91x10 - 7 - 0.9x10 - 7) غرام لكل سنتميتر عند مسافه (6) سنتميتر لكل نسب الكرافيت وكذلك معامل الاحتكاك (0.562 - 0.590) ,الممانعة الكهربائية كانت (108x10 - 3 - 80x10 - 3) اوم لكل متر والتوصيليه الحرارية كانت (116.41 - 131) وات لكل كلفن متر لكل نسب الكرافيت.العينه (10%)كرافيت اختيرت افضل نموذج حيث كانت الفجوات الضاهرية لها (10.024) غرام لكل سنتميتر مكعب والكثافة الحجمية (5.13) غرام لكل سنتميتر مكعب ومعامل الاحتكاك (0.580) ومعدل البلي(2.58x10 - 7) ) غرام لكل سنتميتر عند حمل (15)نيوتن وممانعة كهربائية (80.2x10 - 3) اوم لكل متر وتوصيلية حرارية (128.37) وات لكل كلفن متر .مواد مختلفة مثل سليكون الكاربيد(SiC) واوكسيد اليثانيوم(( La2O3 ومسحوق الكالين(Kaolin) استخدمت كمواد تطعيم بنسب مختلفة اضيفت الى العينة (10%) كرافيت ودرس تاثيرها على خواص المركب حيث كان معدل البلي قد تحسن حيث اصبح (0.65x10 - 7) غرام لكل سنتميتر لعينة سليكون الكاربيد(SiC) (2.5%) وكذلك الصلادة ازدادت, (1%) من واوكسيد اليثانيوم(( La2O3 قللت معدل البلي الى (1.72x10 - 7) غرام لكل سنتميتروكذلك الصلادة ازدادت ,اضافة نسب مختلفة من الكالين الى المركب وخصوصا النسبة (5%) قد حسنت معدل البلي حيث وصل الى (2x10 - 7) غرام لكل سنتميتر مع زيادة للصلادة ايضا.معدل البلي ومعامل الاحتكاك درست باستخدام تقنية (pin - on - disk) حيث استخدمت ثلاثة احمال هي (5,10,15) نيوتن وعلى ثلاث مسافات هي (4,6,10) سنتمتر, بصورة عامه النتائج اظهرت ان معدل البلي يزداد مع زيادة الاحمال والمسافات | In the present work, copper - graphite composite is prepared by powder metallurgy method P/M, and studying their physical, mechanical, electrical and thermal properties.Different percentages of graphite (40 wt%, 30 wt%, 20 wt%, 10 wt% and 5 wt%) have been added to copper powder. Each percentage mixed carefully with (2) wt% of polyvinyl Alcohol (PVA) as a binder.Many samples as a disc have been compacted at (55) MPa, and then sintered in evacuated quartz tube at (900)oC for (4) hours where the heating and cooling was (4.5)oC per min. Bulk density, apparent porosity, wear resistance, friction coefficient, electrical resistivity and thermal conductivity of the composite have been study. Where the bulk density (3.24 - 6.1)gm/cm3 for all the percentage of graphite, and the apparent porosity was (13.816 - 8.768) gm/cm3 and wear rate at difference load (5,10 and 15)decreased with increasing graphite content, where the rate (2.91x10 - 7 - 0.9x10 - 7)gm/cm at distance (6)cm for all the percentage of graphite and friction coefficient was (0.562 - 0.590), electrical resistivity was (108x10 - 3 - 80x10 - 3)ohm. m, and thermal conductivity (116.41 - 131) w/k.m for all percentage of graphite.10 wt% graphite composite has chosen a best of samples where the apparent porosity was (10.024) gm/cm3 and bulk density (5.13) gm/cm3 and friction coefficient (0.586) and wear rate (2.58x10 - 7) gm/cm at (15)N as a load, and resistivity (80.2x10 - 3) ohm .m and thermal conductivity (128.37) w/k.m.Different materials such as SiC, La2O3 and Kaolin have been used as doping materials in different percentages to best sample prepared (10 wt% graphite) and studying their effect on the properties of this composite. The wear rate has been enhanced where it becomes (0.65x10 - 7) gm/cm for (2.5 wt% SiC) and the hardness has been increased. (1 wt% La2O3 ) has also decreased the wear rate to (1.72x10 - 7) gm/cm with increasing the hardness of the samples. Adding different percentage of kaolin to the composite specially (5 wt %) has enhanced also the wear rate where reach to (2x10 - 7) gm/cm and hardness increasing too. Wear rate and friction coefficient studying under dry sliding condition using pin - on - disk technique. Three loads (5, 10 and 15) N, where used at different distance effect (4, 6 and 10) cm from the center of disk. In general the results showed that the wear rate is increased with increasing the applied load and increased the distance

دراسة الخصائص الطيفية لجزيئة 9,10 - دايفينيل انثراسين == Study of Spectroscopic Properties of 9, 10 - Diphenyle anthracene Molecule

Author name: مروة محمد جاسم
Supervisor name: زياد عدنان صالح
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: في هذا العمل، تم قياس ودراسة الخصائص الطيفية للمحاليل التي تشمل اطياف الامتصاص والفلورة لمركب (9,10 - دايفينيل انثراسين DPA) المذاب في عدد من المذيبات القطبية وغير القطبية عند الطول المجي المهيج (λex=365 nm), كما تم حساب الكفاءة الكميه وزمن العمر. واستخدم تركيز مخفف لغرض التقليل من ظاهرة الامتصاص الذاتي. وان المذيبات المستخدمة لاذابة DPA)) هي (السايكلوهكسان , 1, 4 - ديوكسان ,البنزين, الايثانول وثنائي ميثيل سلفوكسيد) مع ثوابت عازل (47.2, 24.3 ,2.27 ,2.21,2.02) على التوالي. حيث وجد ان الكفاءة الكمية لمحلول DPA في السايكلوهكسان ,4 - 1 ديوكسان والبنزين عند التركيز [1×10 - 5M] تساوي (qFM =0.956)، ( (qFM = 0.952 و(qFM= 0.947) على التوالي. ولكن عند حساب الكفاءة الكمية لمحلول DPA في الايثانول، والثنائي ميثيل سلفوكسايد وجدت انها تساوي(qFM= 0.904) و(qFM= 0.88) . ان هذا الاختلاف في قيمة الكفاءة الكمية يرجع الى قطبية المذيب.اظهرت زيادة في زمن العمر الاشعاعي مع زيادة قطبية المذيب . كما لوحظ ان هناك ازاحة لطيف الفلورة باتجاه منطقة الطول الموجي الطويل (ازاحه حمراء) وانخفاض في شدة الفلوره مع زيادة قطبيه المذيب. وقد تم حساب معدل العمليات الاشعاعي (KFM)، واللااشعاعي (KIM) وازاحة ستوك. كل القياسات تمت في درجة حرارة الغرفة. من جهة اخرى, تظهر هذه الدراسة الخصائص التركيبية والبصرية والكهربائية للاغشية الرقيقة لل DPA النقي والمشوب بالانثراسين عند نسب تشويب(20,15,10,5)=x % والمحضرة بطريقة الرش الكيميائي الحراري على الواح من الكوارتز والزجاج على حد سواء وبتركيز مولاري [1*10 - 2 M]. تشير نتائج فحوصات الاشعة السينية (XRD) الى ان اغشية DPA النقي والمشوب بالانثراسين ذات طبيعة تركيبية متعددة التبلور. اشتملت دراسة الخواص البصرية لاغشية DPA النقي والمشوب بالانثراسين على قياسات طيفي الفلورة والامتصاص ولمدى اطوال موجية (300 - 650nm), حيث لوحظ نقصان في قيمه فجوة الطاقة البصرية مع زيادة معدل التشويب. ان الخصائص الكهربائية لاغشية DPA النقي والمشوب بالانثراسين قد تمت دراستها.ولهذه الاغشية طاقتي تنشيط ضمن المدى الحراري (35 - 155 °C) .ولكل طاقة تنشيط ميكانيكية توصيل مختلفة التي يمكن تفسيرها بالاعتماد على نظرية الحزم لشبه الموصل. اثبتت قياسات تاثير هول ان اغشية DPA النقي والمشوب بالانثراسين عند نسب تشويب مختلفة هي اشباه موصلات عضوية من النوع الموجب (p - type). | In the present work, the spectroscopic properties which includes the absorption and fluorescence spectra of solutions for compound (9, 10 - Diphenylanthracene) dissolved in polar solvents and non - polar solvents at excitation wavelength (λex=365 nm) had been measured and investigated .The quantum yield and lifetime were calculated. Diluted solutions were used to eliminate the effect of self - absorption phenomena. The solvents which were used to dissolve DPA are (cyclohexane, 1, 4 - dioxane, benzene, ethanol, and dimethylsulfoxide) with dielectric constants (2.02, 2.21, 2.27, 24.3, 47.2) respectively. It is found the quantum yield of solution DPA in cyclohexane, 1, 4 - dioxane and benzene at concentration [1×10 - 5M] is equal to (qFM= 0.956), (qFM= 0.952) and (qFM= 0.947) respectively. But the calculated quantum yield of solution DPA in ethanol, and dimethylsulfoxide were found (qFM= 0.904) and (qFM= 0.88). This difference in the values of quantum yield is due to the solvent polarity. The results showed an increase in the radiative lifetime with increasing of solvent polarity. Also, a shift in the fluorescence spectra toward long wavelength region (red shift) and decreased the intensity with increase of the polar solvents had been noticed. The rate parameter of radiative (KFM), non - radiative (KIM) and Stoke shift were calculated. All measurements were at room temperature. On the other hand, this study shows the structure, optical and electrical properties of DPA pure and dopant anthracene thin films with doping ratios x=(5,10,15,20)% were prepared by chemical spray pyrolysis technique, which deposited on glass and quartz substrate ,are both which have been used at molarity concentration [1*10 - 2 M]. The results of examinations X - ray (XRD) indicate that the DPA pure and dopant anthracene films are polycrystalline in nature structure. Optical properties measurements are include fluorescence and absorption spectra in the wavelength range (300 - 650nm), the optical energy band gap of pure DPA and dopant anthracene films are observed they are decreasing with increasing rate doping. Electrical properties of DPA pure and dopant anthracene films have been studied. These films have two activation energies (Ea) within range thermal (35 - 155 °C).Each activation energy has different mechanical connecting which could be interpreted by relying on the bands theory of semiconductor. Also, the Hall Effect measurements prove that pure DPA and dopant anthracene thin films are p - type organic semiconductor

ايجاد تراكيز اليورانيوم والرادون في ترب لمناطق من جنوب شرق بغداد باستخدام كاشف الاثر النووي (CR - 39) == Determine Uranium and Radon Concentration in Soil Taken from Area Situated in South East of Baghdad by Using the Nuclear Track Detector(CR - 39)

Author name: محمود سالم كريم
Supervisor name: نجيبة عبد الله حسن الحمداني | ندى فاضل توفيق
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: يستهدف البحث ايجاد تراكيز اليورانيوم وغازالرادون في التربة لمناطق من جنوب شرق بغداد(الوردية والتويثة وحي الرياض) للتعرف على مدى تلوث تلك المناطق باليورانيوم جراء العبث بالمصادر المشعة التابعة لمنظمة الطاقة الذرية. ان هذه الدراسة تعد من الدراسات البيئية المهمة في مجال التعرف على مدى التلوث البيئي للمناطق السكنية القريبة من منظمة الطاقة الذرية بعد احداث الحرب على العراق عام (2003). تضمن الجزء الاول ايجاد تراكيز اليورانيوم في التربة باستخدام تقنيةعد اثار شظايا الانشطارفي كاشف(CR - 39) الناتجة من انشطار نواة U238 بالنيوترونات السريعة من المصدر النيوتروني(241 Am - Be) . اما الجزء الثاني فقد تضمن ايجاد تراكيز غاز الرادون في التربة باستخدام تقنية عد اثار جسيمات الفا المنبعثة من غاز الرادون في كاشف الاثر (CR - 39) . تم تحديد التراكيز بالحسابات المعتمدة على المقارنة مع النماذج القياسية, وقد اوضحت النتائج التي حصلناعليها ان اعلى تركيز لليورانيوم كان في منطقة الوردية(5.3 ppm) تليها التويثة(3.45 ppm) فحي الرياض (3.34 ppm) وان اعلى تركيز لغازالرادون كان في منطقة الوردية 697.18 Bq/m3) ) يليها حي الرياض(163.54 Bq/m3) فالتويثة (119.17 Bq/m3) ويتضح تلوث منطقة الوردية باليورانيوم والرادون اكثرمن بقية المناطق | The aim of research is to determine Uranium and Radon concentration in soil samples taken from area situated in southeast of Baghdad (AL - Wardia, AL - Twitha and Haiy AL - Ryaid) to determine the level of concentration of these areas with Uranium this contamination was due to the mis - handeled of the radioactive sources of the Atomic Energy Oganization after the war Iraq in(2003).The first part consists the determination of Uranium concetration in soil samples using fission tracks registration in (CR - 39) detector obtained by the bombardment of U238 with fast neutrons from (241 Am - Be) neutron source.The second part concerns with the determination of Radon concentration in soil by using alpha - emitters registration which emittfrom Radon gas in (CR - 39) detector.The concentration values were calculated by a comparsion with standard samples.The results obtained shows that the Uranium concentrations in AL - Wardia (5.3 ppm) after it in AL - Twitha (3.45 ppm)and Haiy AL - Ryaid (3.34 ppm) and the higher concentrations to Radon gas in AL - Wardia (697.18 Bq/m3) after it in Haiy AL - Ryaid (163.54 Bq/m3) and AL - Twitha (119.17 Bq/m3) we show that Uranium and Radon concentration in AL - Wardia is higher than the other regions.

تصنيع كاشف المفرق الهجين CdO/p - Si بطريقة الرش الكيميائي الحراري == PREPARATION OF CdO/p - Si HETEROJUNCTION DETECTOR BY CHEMICAL SPRAY PYROLYSIS

Author name: محمد غفار فرج
Supervisor name: رائد عبد الوهاب اسماعيل | سلوان كمال جميل
General topic: Physics
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: في هذا البحث، تم لاول مرة تصنيع كاشف يعمل بنمط الفولتائية الضوئية من المفرق الهجين غير المتماثل n - CdO/p - Si والمصنع بطريقة الرش الكيميائي الحراري وباسماك 50, 100 and 150 nm وتم استخدام عدة فولتيات انحياز تراوحت بين 1 - 5 Volts. لقد اوضحت النتائج ان هذا الكاشف يعمل بالمدى الطيفي 400 - 1000 nm.بينت نتائج قياسات تاثير هول ان الطبقة المرسبة من CdO ذات توصيلية مانحة لذلك فان المفرق المتكون هو من النوع غير المتماثل.اظهرت نتائج خصائص تيار - جهد ان كل من تيار الظلام وتيار الضوضاء يزدادان بزيادة سمك CdO. كشفت هذه النتائج ايضا ان عامل المثالية يزداد بزيادة سمك غشاء CdO مما يعطي مؤشرا واضحا على زيادة تركيز العيوب.بينت نتائج قياس سعة - جهد ان المفرق المصنع من النوع الحاد وان قيمة جهد البناء الداخلي تقل بزيادة سمك CdO.ان الدراسات الخاصة بالاستجابة الطيفية بينت ان لهذه الكواشف استجابية تتميز بقمتين : الاولى عند الطول الموجي 600 nm والثانية عند الطول الموجي 800 nm. وبلغت اعلى قيمة للاستجابية 0.46 A/W عند الطول الموجي 800 nm وباستخدام جهد انحياز 3 Volts وان الكفاءة الكمية القصوى بلغت 71% واعلى قيمة للكشفية كانت بحدود 3.6 x 1011 cm.Hz1/2.W - 1 كما ابدت الكواشف المصنعة استجابة لليزر He - Ne. وقد وجد ان الاستجابية الطيفية تقل بزيادة سمك غشاء CdO وان افضل سمك في هذا البحث هو 50 nm

تاثير المعاملة الحرارية على الخواص البصرية للخلائط البوليمرية (PVC/PS/PMMA) == Effect of Heat Treatment on Optical Properties of Polymer Blends (PVC/PS/PMMA)

Author name: محمد زورة حسن
Supervisor name: اسرار عبد المنعم سعيد
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: العمل الحالي من البحث يهتم بدراسة تاثير نسبة الخلط على الخواص البصرية للنماذج البوليمرية مدار البحث PS, PMMA] [PVC, والخلائط الثنائية ] [PS/PMMA, PVC/PMMA, PVC/PS والخلائط الثلاثية [PVC/PS/PMMA] وبمختلف التراكيز. كذلك دراسة تاثير المعاملة الحرارية على الخواص البصريه للانظمة البوليمرية [PVC/PS/PMMA] والخلائط الثنائية بنسبة [50 %PS/50%PMMA, 50% PMMA/ 50% PVC / 50% PS /50% PVC] صبت العينات كاغشية من البوليمرات المذكورة اعلاه والخلائط الثنائية والثلاثية ولمختلف التراكيز . وفحصت النماذج البوليمرية المحضرة طيفيا لاختيار نماذج البوليمرات ذات افضل خواص بصرية وجد بان الخليط الثنائي ( 50% PMMA/ 50% PVC) يمتلك احسن خواص بصرية وقد وجدت فجوة الطاقة الخليط تساوي(4.8eV) .اخضعت البوليمرات النقية[PVC/PS/PMMA] , مع الخلائط الثنائية[50 %PS/50%PMMA, 50% PMMA/ 50% PVC 50% PS /50% PVC] الى المعاملة الحرارية ضمن المدى[50 - 175 ºC] ولمدة ساعتين لدراسة تاثير المعاملة الحرارية على الخواص البصرية .لوحظ بالنسبة للانظمة البوليمرية المعاملة حراريا تغير في اطياف الامتصاص وضمن مديات الطول الموجي والتي تعتمد على نوع البوليمر والخليط البوليمري. التحلل الحراري ادى الى زيادة في اطياف الامتصاص للنماذج المعرضة للحرارة.حيث تعتمد الزيادة على نوع البوليمر والخليط البوليمري خصوصا عند درجة الحرارة 175 ºC بالنسبه الى(PS (وجد تناقص في اطياف الامتصاصية في الحالات التي يتسبب فيها التفكك الحراري بتلف سطحي مثل التصدعات والتشققات . حسبت فجوة الطاقة وطاقة اورباخ قبل وبعد المعاملة الحرارية للنماذج البوليمرية مدار البحث .اظهرت النتائج السلوك اللاخطي لعلاقه الترابط ما بين الثوابت البصرية والنسب الوزنية للخليط البوليمري قد اعزيت الى كونها غيرمتوافقة الخلط .ان السلوك اللاخطي لعلاقة الترابط بين الثوابت البصرية ودرجة الحرارة للنماذج البوليمرية المعاملة حراريا يعود الى التفكك الحراري غير النظامي لنماذج البحث . ولقد تم الكشف عن التلف السطحي ] التصدعات والتشققات[ الناجم عن التفكك الحراري باستخدام الميكروسكوب وجهاز المجهر الالكتروني الماسح[SEM] وجد بان التفكك الحراري من السهولة ان يحدث تلف سطحي ميكانيكي. لتحديد الخواص الرئيسيه للحزم اجريت فحوصات [FTIR] للنماذج البوليمرية قبل وبعد المعاملة الحرارية لتمييز خواص الحزم الرئيسية وتفسير نتائجها. | The present work was concerned with study of the blending ratio effect on the optical properties of the polymer systems involved [Poly(vinyl chloride) (PVC), Polystyrene (PS), Polymethylmethacrylate (PMMA)], binary blends [PS/PMMA, PVC/PMMA, PVC/PS] and ternary blends [PVC/PS/PMMA] at different concentrations. Also this work was concerned with study the effect of heat treatment of optical properties of polymer system involved [PVC/PS/PMMA] and binary blend with ratios, [50 %PS/50%PMMA, 50% PMMA/ 50% PVC and 50% PS /50% PVC]. The samples were casted as films from the homopolymer stated above and the blends as a binary and ternary blend at different concentration. These prepared polymer systems were evaluated spectrophotometically for selection the polymer systems of the best optical properties. It was found that 50% PMMA/ 50% PVC binary blend has the best optical properties. The results showed that its energy gap was (4.8eV). The homopolymer [PVC/PS/PMMA] and the binary blend [50 %PS/50%PMMA, 50% PMMA/ 50% PVC and 50% PS /50% PVC] were subjected to heat treatment with range of [50 - 175 ºC] for (2hr) to study the effect of heat treatment on their optical properties. The absorption spectra of the heat polymer systems showed heating induced absorption changes in the wavelength range, which depends on the polymer type and polymer blend. The thermal degradation caused increment in the absorption of degraded samples. The increment depended on the polymer type and polymer blend especially at 175 ºC. For (PS) decreasing in absorption was also found for cases in which, thermal degradation caused surface damage i.e. cracks and crazes formation. Also the optical energy gap and urbach energy were calculated the absorption spectra before and after heat treatment to the polymer systems involved.The results showed nonlinear relationship between the optical constants and blend ratio, it was attributed to their immiscibility. The nonlinear relationship between the optical constant of the heat treatment polymer systems and polymer blend with the heating temperature was attributed to the unsystematic thermal degradation induced by heating. Morphological investigations for the surface damages [crazes and cracks] caused were performed by optical microscope and SEM. It was found that the thermal degradation lead to some mechanical surface damage. FTIR spectroscopy was carried out for polymer systems before and after heat treatment to identify the region of the main characteristic bands and its results was investigated.

تاثـيـر الـتـعـويـض Gd وBa عـلى خـواص التوصيـلية الفائـقـة للمركب Bi1.6Pb0.4Sr2 - yBayCa2 - xGdxCu3O10+ ? == Effect of Gd and Ba Substitution on the Superconducting Properties of Bi1.6Pb0.4Sr2 - yBayCa2 - xGdxCu3O10+ ? Compounds

Author name: فــردوس شاكــر احـمـد
Supervisor name: ندى خضير عباس | لمياء خضير عباس
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: تم تحضير المركبات Bi1.6Pb0.4Sr2 - yBayCa2 - xGdxCu3O10±δ ولقيم (0≤x≤0.5) و(0≤y≤0.3) بطريقة تفاعل الحالة الصلبة التقليدية. كما درس تاثير التعويض الجزئي بـ Gd محل Ca والـ Ba محل Sr على التوالي على خواص التوصيلية للمركب بواسطة مطياف حيود الاشعه السينية (XRD)، مطياف الماسح الالكتروني (SEM )، مطياف تفريق طاقه الاشعه السينيه (EDX)،حساب محتوى الاوكسجين في المركب وقياسات المقاوميه الكهربائية DC. ان ظروف التلبيد المثلى للمركب النقي درجة حرارة تلبيد مساوية الى 850 درجة مئوية وبفترة زمنية 140 ساعة مع تبريد العينات في الهواء.استخدمت تحليلات الاشعة السينية EDX لفحص نسبة العناصر المكونة للمركب Bi1.6Pb0.4Sr2 - yBayCa2 - xGdxCu3O10±δوطاقاتها وقد تمت المقارنة بين تراكيز العناصر في العينات التي اظهرت حالة التوصيل الفائق. بينت تحليلات حيود الاشعة السينية لجميع نماذج فائقة التوصيل انها تمتلك طورين الطور الفائق التوصيل العالي (2333)BiPb - والطور الفائق التوصيل الواطئ (2212)BiPb - مع وجود طور الشوائب. وان جميع العينات لها تركيب معيني قائم. كما تم حساب ثوابت الشبيكة، النسبة المئوية لوجود الطور العالي (2333)BiPb - للعينات وكذلك كثافتها كما وجد بان قيمة الثابت البلوري (a) تزداد مع زيادة نسبة الكادلنيوم بينما تقل قيمة الثابت البلوري (c).بينت قياسات المقاومية الكهربائية ان قيمة درجة حرارة الحرجة Tc تقل مع وجود التعويض. وهذا الهبوط في قيمة Tc يشير الى ان الاخماد في خاصية التوصيل المفرط في النماذج المعوضة بـ Gd وBa يكون اقل من النماذج المعوضة بـ Gd فقط. قيمة درجة حرارة الحرجة Tc في النماذج المعوضة بـ Gd باعلى من 0.2 تقل الى 100.5 K، بينما قيمة محتوى الاوكسجين يقل. زيادة تركيز الـ Gd الى x≥0.3 يؤدي الى انتاج نماذج شبه موصلة.كما وجد ان التعويض بـ Gd وBa معا ادى الى تحسين قيمة الـTc الى 102K عند x=0.2 وy=0.1. كما ان قيمة المقاومية تقل قليلا لكنها لا تصل الى القيمة الصفرية لانها تتصرف بسلوك شبه فائق التوصيل.استخدم المجهر الالكتروني الماسح SEM لمعرفة طبيعة السطح لطور التوصيلية الفائقة وكذلك لبحث تاثير التعويض بـ Gd فقط واظهرت النتائج تواجد تراكيب على شكل صفائح والتي تميز انماء الحبيبات للطور BiPb - (2223) العالي. حيث تبدو الحبيبات نوعا ما كثيفة ومترابطة جيدا.اذ ان هذه الحبيبات في النماذج المعوضة بـ Gd فقط تكون اكبر حجما ومختلفة جدا. اما اتجاهاتها فيبدو اقل عشوائية مع نقصان الفراغات. اضافة Ba يؤدي الى زيادة الفراغات والتي تزيد من المسافة بين الحبيبات.تم تعيين الحجم الحبيبي للنماذج المحضرة باستخدام مايكروسكوب القوى الذرية (AFM)، كما تم تعين الخشونة كداله لنسب التعويض ايضا. | A series of the compounds with nominal composition Bi1.6Pb0.4Sr2 - yBayCa2 - xGdxCu3O10±δ with (0≤x≤0.5) and (0≤y≤0.3) were prepared by the conventional solid - state reaction method. The influence of gadolinium and barium substitution at Ca and Sr sites respectively on the superconducting properties, have been investigated by the X - ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive x - ray spectroscopy (EDX), oxygen content and DC electrical resistivity measurements. The optimum sintering temperature for the pure composition is 850˚C and sintering time is 140h by two steps.Energy dispersive x - ray spectroscopy (EDX) analyses was used to test the proportions of the elements of the compound of Bi1.6Pb0.4Sr2 - yBayCa2 - xGdxCu3O10±δ.X - ray diffraction analysis revealed that there exists two phases i.e. BiPb - (2223) and BiPb - (2212), in addition to the impurity phases. It was found that the crystal structure was orthorhombic. Parameter values, the volume fraction of the (2223) - phase of prepared samples and their densities have been calculated. It was found that the lattice parameter value a increase with the increase of Gd content, while the lattice parameter value c was decreased. Electrical resistivity measurements show that the value of the superconducting critical temperature Tc decrease with the supstitutions content. The depression of Tc indicates that the suppression of the superconductivity in Gd and Ba substituted samples is lower than that Gd substituted only.Substitution of Gd up to 0.2 will decrease the transition temperature to TC=100.5 K, while excess oxygen content decreases. Increasing of Gd content to x≥0.3 produced semiconductor samples. It has been found that substitution of Gd and Ba together enhance TC to 102 K at x=0.2 and y=0.1. The resistivity decreases slowly but does not become zero even at the boiling point of liquid nitrogen but it behaves like a superconductor. The morphology of the samples obtained by SEM of the sample substituted with Gd only shows the layered structure which characterizes the growth of BiPb - (2223) grains. The grains appear rather dense and well connected.The grain in samples containing Gd only have a larger size and aspect very different. Their orientation seems less random and porosity even smaller. The addition of Ba appears to increase the porosity which manifested in large space between the grains. The grain size of samples were determined by atomic force microscope (AFM) techniques, the roughness were also determined

دراسة الخصائص التركيبية والكهربائية لمركبات الباريوم تيتانيت المطعمة بالكالسيوم والسترونتيوم النانوية المحضرة بطريقة السول - جل ذات الاحتراق التلقائي == Studying Structural, and Electrical Properties for Nano Barium Titanate doped with (Ca,Sr) prepared by Sol - Gel Auto Combustion Method

Author name: فراس محمد طعمة عباس الجبوري
Supervisor name: فاروق ابراهيم حسين قادر
General topic: Physics
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: حضرت مركبات الباريوم تيتانيت النانوية (Ba1 - xSrxTiO3) لقيم (x=0,0.26,0.28,0.30,0.32,0.34) Ba1 - xCaxTiO3،للقيم (x=0.2,0.4,0.6,0.8)باستعمال طريقتين مختلفتين, الطريقة الاولى جديدة تستعمل لاول مرة وهي طريقة السول - جل ذات الاحتراق التلقائي، والثانية طريقة السول - جل ،ثم اجريت عليها الفحوصات والدراسات التركيبية والكهربائية. اظهرت نتائج الخواص التركيبية تشكيل الطور الرباعي ووجوده في جميع العينات المحضرة بالطريقتين، على الرغم من استبدال ايون (Ba+2),بالايون (Sr+2), والايون (Ca+2),في كلا المركبين, كذلك بينت نتائج عملية الفهرسة البرمجية باستعمال برنامج (FULL PROF)، جودة عملية التصفية(GOF),اذ كانت قيمها اكبر من الرقم(1)،لجميع العينات كما تبين نقصان كل من معلمات الشبيكة وحجم خلية الوحدة والكثافة النظرية والحجم الحبيبي للعينات بزيادة تركيز الايون (Sr+2)،والايون(Ca+2)، في كلا المركبين المحضرين مع بقاء نسبة الرباعية (c⁄a) بقيت اكبر من الرقم(1) في كل العينات. وعند دراسة خواص العزل الكهربائي سببت زيادة تركيز ايون (Sr+2)، وايون (Ca+)،زيادة ثابت العزل الكهربائي ونقصان كل من معامل الفقد العزلي والتوصيلية الكهربائية المتناوبة بثبوت العوامل الاخرى مثل درجة الحرارة والتردد وسمك العينات وتغيرها الواضح مع التردد(50Hz - 1MHz) كذلك سببت زيادة تركيز ايون (Sr+2)، وايون (Ca+)،نقصان التوصيلية الكهربائية المستمرة وزيادة متانة العزل الكهربائي للعينات المحروقة بدرجة (1100ᴼC) لمدة (4h) والمحضرة بطريقة السول - جل ذات الاحتراق التلقائي.بينت نتائج الفحوصات الكهربائية وفحص متانة العزل الكهربائي ان النسبة (X=0.30)، ذي الصيغة الكيميائية (Ba1 - xSrxTiO3)،والنسبة (X=0.6)، ذي الصيغة الكيميائية(Ba1 - xCaxTiO3)، تمتلكان اكبر ثابت عزل كهربائي واكبر متانة عزل كهربائي ،واقل معامل فقد عزلي ،واقل توصيلية كهربائية متناوبة ومستمرة ،عليه فانهما افضل نسبتين تم تحضريهما لاول مرة | In this research, Nano Barium titanate ,(Ba1 - xSrxTiO3) of values ,(x=0,0.26,0.28,0.30,0.32,0.34),and (Ba1 - xCaxTiO3)values(x=0.2,0.4,0.6,0.8) were synthesized using two different methods ,the first was a new method used for the first time, in synthesized aforementioned titanate compounds, which sol - gel auto - combustion method, and the second was sol - gel method , then the structural and electrical properties were studied. The Structural results showed presence and forming the Tetragonal Phase in all samples,though,the Substitution(Ba+2) ion with (Sr+2)and(Ca+2)ions, the results of the software indexing by (FULL PROF),program showed goodness of fitting(GOF) greater than(1),also the results showed that lattice parameters, Volume, theoretical Density and grain size decreased when the concentration of(Sr+2)and(Ca+2)ions increased in both compounds and the Tetragonality ratio (c/a) remained greater than the number (1) in all samples. When examining the dielectric properties increasing of (Sr+2) and(Ca+2) ions concentration caused increased in Dielectric Constant and decreased Dielectric loss factor, alternating electrical conductivity certified the other factors such as temperature, frequency and the thickness of the samples and change clearly with frequency (50 Hz - 1MHz),also increasing of (Sr+2) and(Ca+2) ions concentration caused decreased in direct electric conductivity and increased Dielectric Strength for the samples that fired at (1100ᴼC) for (4h) and prepared by Sol - gel auto - combustion method . The results of electrical tests and examination of the Dielectric Strength showed that ratio (X =0.30), with the chemical formula (Ba1 - xSrxTiO3), and the ratio (X= 0.6), a chemical formula (Ba1 - xCaxTiO3), possess the largest Dielectric Constant and greater Dielectric Strength, and lower Dielectric loss factor, and less alternating electrical conductivity and direct electric conductivity, so they were the best two ratios, prepared for the first time by sol - gel auto - combustion method that can be used in many applications

محاكاة الانتقال الحراري للمتراكبات النانوية لخلطة بوليمرية مدعمة بالانابيب الكاربونية النانوية == HEAT TRANSFERE SIMULATION OF CARBON NANOTUBE - POLYMER BLEND NANOCOMPOSITES

Author name: فاضل كريم فرحان
Supervisor name: صلاح قدوري هزاع
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: In this thesis, thermal conductivity, bending strength, erosion rate, and Vickers hardness, for (epoxy - un saturated polyester) blend reinforced with multi - wall carbon nano tubes ,have been studied, in terms of thermal and mechanical properties, which are subject to change in different (MWCNTs) volume fraction which are (0.1,0.2,0.3, 0.4)%.The nano composites candidates for this work are multi - wall carbon nano tubes), and blend matrix (epoxy - un saturated polyester). Ultrasonic dispersion and magnetic stirring techniques are used to prepare the nano composites specimens follow with cold - casting technique using Teflon molds at standard conditions.Lee’s disk technique is used to measure thermal conductivity. Oxy - acetylene flame technique is used to determine erosion rate. Instron machine is used to measure bending strength. Micro hardness Vickers technique is used to determine the hardness. Simulation programs of heat transfer in three dimensions for erosion test for blend and blend - nano composites specimens are carried out using finite difference method.Thermal conductivity results show that , values increase progressively by succession of volume fraction of fillers, become where is 0.7W/m.K for matrix blend ,and 3.8W/m.K for volume fraction 0.4% . Erosion rate behaves inversely, where it drops at high volume fraction 0.4% of fillers it is 0.19mm/s . Bending strength results show, that increases progressively of volume fraction (0.1,0.2,0.3)% of MWCNTs , become where it is (93,109,118) MPa , by succession ,and it drops at high volume fraction 0.4% of fillers it is 98MPa, the Y - modulus results show that , values increase progressively by succession of volume fraction of fillers, 1.4GPa for matrix blend, and 3.0GPa for 0.4%vol . Hardness Vickers results show that values increase progressively by succession of volume fraction of fillers ,14MPa for matrix blend, and 21MPa for 0.4%vol . Simulation thermal conductivity results, which are calculated according to Nielsen model, are compared, with the experimental results. From the results it can be observed, that the experimental values, are nearly the same as simulation values in heat flow flux direction. Erosion simulation values 0.2mm/s come higher than experimental values 0.19mm/s, this could be explained, by the interface effect of nanocomposites, which have high strength, strong bond force, and density values are evidence to that.Atomic force microscopy, coupled with auxiliary microscopy, and nanoparticle size measurements for powder MWCNTs are employed to aid interpretation of results. The nanocomposites under the study can be used in applications, which need high thermal dispersion and high erosion resistance, as thermal insulators.

حسابات الخزن المغناطيسي العشوائي في المواد الفيرومغناطيسية == CALCULATIONS FOR RANDOM MAGNETIC STORAGE IN FERROMAGNETIC MATERIALS

Author name: فاتن ساجت مطر الخفاجي
Supervisor name: كاظم جواد كاظم الشجيري
General topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: نظام التسجيل المغناطيسي في الاقراص الصلبة يمثل اكثر مجال متطور نامي بسرعة للتقنيات المتقدمة في العالم في الوقت الراهن. ان هذا العمل مركز على تقييم اداء وسائط التسجيل المغناطيسي ( الطولية والعمودية والبت النمطي) من خلال دراسة تحديدات متطلبات وسائط التسجيل المغناطيسي ذات كثافة الخزن العالية من ناحية الاستقرار الحراري ، نسبة الاشارة الى الضوضاء وقابلية الكتابة. في الدراسات السابقة والتجارب يؤخذ تردد المحاولة كثابت وفي هذه الاطروحة استعملنا تردد المحاولة كدالة لدرجة الحرارة والمجال المسلط وحجم الحبيبة وثابت الاضمحلال . تردد المحاولة النموذجي بحدود وللتسجيل المغناطيسي الطولي والعمودي على التوالي وهي قيمة اكبر بكثير من القيمة التخمينية المستعملة عموما . دراسة وتحليل مجال الكتابة لتحديد افضل نظام تسجيل من خلال تخفيض ابعاد النظام وتقليل المسافة بين راس التسجيل والوسط . دراسة زمن الاسترخاء للتسجيل المغناطيسي الطولي والعمودي كدالة للمجال المسلط وزمن المحاولة عند قيم مختلفة لعامل الاستقرار الحراري. دراسة تحديدات البت النمطي لكثافة الخزن العالية مع وسط ECC لتخفيض مجال النقل للبتات المفردة وتحديدات وسط بت نمطي بكثافة خزن ما بعد 1Tbit/in2. تصميم وسط تسجيل مغناطيسي طولي بكثافة خزن 67 Gbit/in2 . | The magnetic recording system in hard disk drives represents the most rapidly developing area of high technology in the world today. This work is focused on the magnetic recording performance evaluation of longitudinal, perpendicular and bit patterned media by the study of the limitations of media requirements for high areal density magnetic recording in terms of thermal stability, signal to noise ratio and writability. In experiments, the attempt frequency is often taken as constant, but in this thesis we used attempt frequency as the function of the temperature, applied field, grain size and the damping constant. We have found that the attempt frequency is typically about and for longitudinal recording and perpendicular recording, respectively, which is much larger than the commonly used estimate of . Analyzing write field to determine a better recording system by scaling down its dimensions and the head - to - medium spacing. studying the relaxation time for longitudinal and perpendicular magnetic recording as a function of applied field and attempt frequency at different value of the thermal stability factor. Studying the limitations of bit patterned media to higher areal density with exchange coupled composite ECC media to lower the switching field of individual bits and limitations of bit patterned media for 1Tbit/in2 and beyond. Design of longitudinal magnetic recording system for 67 Gbit/in2

تصنيع ودراسة الخصائص الفيزياوية لكاشف Bi2S3 المحضر بطريقة الـتحلل الكيميائي الحراري == Fabrication and study the physical Properties of Detector Bi2S3 prepared by spray pyrolysis Technique

Author name: غفران زحام جبر عبد
Supervisor name: سعاد غفوري خليل العاني
General topic: Physics
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: تم في هذا البحث تحضير غشاء كبريتيد البزموث بطريقة التحلل الكميائي الحراري عند درجة حرارة قاعدة ثابته (300℃) وبتراكيز مولارية مختلفة 0.01 , 0.015 , 0.02) M) على قواعد من الزجاج والسليكون احادية التبلور (Single Crystal) من نوع n - type ذات اتجاهية بلورية عند المستوى (100) ومقاومية كهربائية (10 Ω.cm) ويتراوح سمك الغشاء بين (300 - 600 nm) . تمت دراسة الخواص التركيبية والطوبوغرافية والبصرية للغشاء حيث اظهرت نتائج حيود الاشعة السينية X - Ray ان اغشية Bi2S3 المحضرة متعددة التبلور وذات نظام معيني قائم (Orthorhombic) واعلى شدة كانت عند المستوي (031) , كما اظهرت النتائج البصرية ان قيم فجوة الطاقة تعتمد على التركيز المولاري حيث لوحظ ان قيم فجوة الطاقة تقل من 2.97ev الى 2.4 ev بزيادة التركيز المولاري , واظهر منحني النفاذية ان النفاذية تقل بزيادة التركيز المولاري كما ان منحني الامتصاصية اظهر نتيجه معاكسة لما هو في منحني النفاذية , وبينت دراسة الخصائص الكهربائية للاغشية المحضرة ان التوصيلية زادت بزيادة التركيز المولاري . بينت نتائج القياسات الكهربائية (I - V) لكاشف Bi2S3/Si ان مقدار عامل المثالية يزداد بزيادة التركيز المولاري حيث تراوحت قيمته بين (3.9 - 4.7) , وبينت نتائج الاستجابة الطيفية في مدى الطول الموجي (400 - 850 nm) انها تزداد بزيادة الطول الموجي لحد معين ثم تقل بزيادةλ كما لوحظ ظهور قمتين للاستجابية الاولى عند الطول الموجي (600nm) لغشاء Bi2S3 والثانية عند الطول الموجي (800 nm) للسيليكون وكانت اعلى قيمة للاستجابية كانت 2.52 A/W عند التركيز 0.015 M , وتم حساب الكفاءة الكمية للكاشف ولوحظ زيادة الكفاءة الكمية بزيادة التركيز المولاري وايضا ظهور قمتين عند الطول الموجي (600 nm) وعند الطول الموجي (800 nm) . وكذلك تم حساب الكشفية النوعية ولوحظ زيادة الكشفية بزيادة التركيز المولاري وان اعلى قيمة لها هي 4.6*109 (HZ1/2.W - 1.cm) عند الطول الموجي 600 nm وبتركيز (0.015M) . | In this research Bi2S3 thin film were prepared on glass and Silicon substrates single crystallization from p - type with crystalline directional (100), electrical resistivity (2 - 20Ω.cm) from N - type With crystalline directional (100) , electrical resistivity (10 Ω .cm) at thickness between (400 - 600 nm) using chemical spray pyrolysis method with constant temperature base (300 ℃) and molar concentrations (0.01, 0.015,0.02)M .The structural , topographic and optical properties were studied, the X - ray diffraction results showed that films polycrystalline and with Orthorhombic system Bi2S3 prepared and the highest intensity was at the level (031) , and the optical results showed that the energy gap depends on the concentration values molar where it was noted that the energy gap values increase from 2.4 eVto 2.97eV molar concentration increased , the transmittance curve showed that transmittance decreased with increasing molar concentration also absorbance curve showed the opposite of what is in the transmittance curve.The current - potential (I - V) measured results of Bi2S3 / Si detector value of the ideality factor increases with increasing molar concentration where its value ranged from(3.9 to 4.7), and showed the results of spectral response in the wavelength range(400 - 850 nm)it increases with the wavelength as observed appearance of two peaks of responsiveness, the first when the wavelength (600nm) to Bi2S3 film and the second at the wave length (800 nm) silicon and the highest value of responsivity when concentration 0.015 M.The quantum efficiency calculate of the detector and the observed increase quantum efficiency with increase molar concentration and also appearance of two peaks at the wavelength (600 nm) and at the wavelength (800 nm). As well as the specific detectvity calculate was observed increase detectivity with increased molar concentration and that the highest value is 4.6* 109 (HZ1/2.W - 1.cm) at wavelength 600 nm and concentration (0.015M

دراسة تاثير المضاف 2 - ميثيل نفثالين على نظام اروماتي (انثراسين / 2 - ميثيل نفثالين) == Study of doping effect of 2 - Methylnaphthallen in aromatic system (2 - Methylnaphthallen/Anthracene )

Author name: علي كاظم وداي
Supervisor name: زياد عدنان صالح
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: تم في هذا البحث, اخذ اطياف الفلورة للانثراسين المذاب في دايا ميثيل سلفوكسايد بالتركيزين M] [10 - 3,[10 - 4 M] حيث اظهر اربع حزم اهتزازية واضحة وقد تم تهييجه بطول موجي هو 365nm)) وكذلك تم اخذ طيف ثنائي ميثيل نفثالين النقي المذاب في دايا ميثيل سلفوكسايد وقد اظهر ثلاث حزم اهتزازية وقد تم تهييجه بطول موجي هو (270nm). وقد تمت هذه القياسات بدرجة حرارة الغرفة.اظهرت قياس اطياف الامتصاص والفلورة لمحلول الانثراسين المشوب بثنائي ميثيل نفثالين بنسب مختلفة, بتراكيز مولارية مختلفة تبدء من [10 - 3M] الى [10 - 4M] وبطول مهيج (270nm). واظهرت قياسات اطياف هذه المحاليل تبادلا للشحنة الذي يقود الى انتقال للطاقة من جزيئة المضاف ثنائي ميثيل نفثالين الى جزيئة المضيف الانثراسين باطياف الفلورة عند التراكيز اعلاه. تقود هذه النتائج الى تناقص نسبة انتقال الطاقة المحددة من خلال طريقة ميكانيكية تبادل الالكترون. هذا الانخفاض له عدة اسباب منها وجود الفخاخ (traps) والى الامتصاص الذاتي القوي لبلورة الانثراسين .ان ظهور حافة حادة في طيف الفلورة لجزيئة المضاف (2mn) يشير الى وجود امتصاص ذاتي قوي لطيف هذه الجزيئة مما يؤثر على معدل انتقال الطاقة كما اظهرت النتائج تزايد عامل الكبت مع تزايد التركيز .و يتبين من دراستنا للخصائص الكهربائية والتوصيلة الكهربائية هذه لوجود طاقاتي تنشيط لجزيئة الانثراسين المشوبة بنسب مختلفة من جزيئة ثنائي ميثيل نفثالين ولكل طاقة تنشيط ميكانيكية توصيل مختلفة والمحضرة على الواح كوارتز والزجاج على حد سواء وبتركيز مولاري [5*10 - 2 M], التي يمكن تفسيرها بالاعتماد على نظرية الحزم لشبه الموصل والتي تقترح انتقال حاملات الشحنة من مستوى فيرمي المانح الى حزمة التوصيل في شبه الموصل السالب (n - type) عند درجات الحرارة العالية بواسطة التهيج الحراري . معلمات تركيب الشبيكة للاغشية الرقيقة للانثراسين المشوب بثنائي ميثيل نفثالين التي حللت بواسطة (a LabX XRD 6000 SHIMADZU XR - Diffractometer with Cu Kα radiation) , يظهر تاثير التشويب على الافلام الرقيقة للانثراسين بشكل واضحا. وتم الحصول على نمط الحيود بزاوية (2θ) وتبدء من (20°) الى (60°) وبزاوية مجسمة مقدارها (5°) . وكلاهما ثنائي ميثيل نفثالين المضاف الى الانثراسين كشائبة يظهر طيف حيود الاشعة السينية عمليا قمة حاده وقمتان صغيرتان, وهذا يعني لنا ان الاغشية الرقيقة ذات طبيعة تركيبية متعددة التبلور. | In this research, The fluorescence spectrum of Anthracene dissolved in dimethylslfoxayd was studied then showed four obvious vibrated bands ) λex=365nm). Moreover, the spectrum of pure (2 - Methylnaphthalene) dissolved in dimethylslfoxayd was dealt with and it showed three vibrated bands and it has taken at a wavelength (λex=270nm). The measurements was at the room temperature. The absorption and fluorescence spectra of solutions for anthracene doped with 2 - Methylnaphthalene with different ratios, had been measured with different molarity concentrations starting from the [10 - 3M] to [10 - 4M] and at excited wavelength) λex= 270 nm). The measurements of these solutions spectra showed the electron exchange, which led to the energy transfer from the guest (2 - Methylnaphthalene) to the host (Anthracene) with getting fluorescence at the above concentrations. The results led to a decrease in the rate of the energy transfer calculated in the way of energy transfer through mechanical electron exchange. This decline has several causes including the existence of (traps) and to the strong self - absorption of the anthracene crystal.The appearance of a sharp edge in the fluorescence spectrum of the guest (2 - methyl naphthalene) molecule indicates a strong self - absorption spectrum of this molecule which affects on the rate of energy transfer. Also, the results showed the increasing of the quenching factor with the increasing of the concentration.This study shows the presence of energies activation Anthracene doping different proportions of 2 - Methylnaphthalene which were prepared on a substrate of glass and quartz are both which have been used at molarity concentration [5*10 - 2M]. Each activation energy has different mechanical connecting which could be interpreted by relying on the bands theory of semiconductor which proposes a transition charge which carriers from the fermi donor to the conduction band in the semiconductor negative (n - type) at high temperatures by thermal excitation.The structure and lattice parameters of anthracene dopant 2 - Methylnaphthalene thin films were analyzed by a LabX XRD 6000 SHIMADZU XR - Diffractometer with Cu Kα radiation. The effect of the Anthracene dopant on the structure of the film is clear. Diffraction pattern was obtained with 2θ starting from 20° to 60° at 5° solid angle. In both the as - deposited and Anthracene - doped 2 - Methylnaphthalene thin films, the X - ray diffraction spectra possess one sharp and two small peaks. It means that the film is polycrystalline in nature structure

تحضير ودراسة الخصائص الفيزيائية والمكانيكية للمادة المرتكبة المحضرة من سيراميك الكودراتيت المدعمة بالنحاس == Preparation and study the physical and mechanical properties of Cu reinforced cordierite ceramic composites

Author name: علاء رافد علي
Supervisor name: انوار حسين علي الفؤادي
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: A raw material mixture was used for forming the ceramic matrix cordierite(Cor), was included Iraqi clay (Kaolin Duekhla), Alumina and Talc. Prepare (Cu/Cor) composite, were obtained by addition a fine powder (99.99%) of copper as a reinforcement material, to cordierite ceramic with different percentage ratios (10, 20, 30 and 40) wt%. The temperatures for preparing the composite are (700,800) °C ,and the time of treatment is (1,2) hours respectively. The result of X - ray revealed that the peaks of cordierite phase decreased with increasing the additive amount of copper and slightly increased as temperature elevated from 700 oC to 800oC. Scanning electron microscope (SEM) test was used to observe morphology of blend materials . The comparison results of microphotograph images of cordierite ceramic and (Cu/Cor) composite with 40 wt % Cu , shows that the surface of cordierite sample is uniformly and compactly interference by copper distribution particles led to decreasing the porosity with increasing temperature to 800°C for two hours. The measurement of bulk density and apparent porosity was carried out according to Archimedes method and according to (ASTM) procedure, the results show that the density and thermal conductivity of (Cu /Cor) composite samples increased with increasing copper content ratios up to 40 wt% at the heat treatment (700,800) °C for (1,2) hours respectively. The results of calculation of apparent porosity (Por) and water absorption (%) was shows that, the values were decreased at 800°C more than 700°C ,for two hours more than one hours and at copper content ratio 40% more than (30, 20 and 10) respectively. Vickers micro hardness test is carried out by using "Digital Micro hardness tester VHS 1000. The presence of copper decreases the hardness, in comparison with the untreated ceramic sample(without copper) while the compressive strength increased with the increasing the temperature and copper content ratio from (38) to( 167.8 ) MPa at 800˚C . The addition of copper up to 40% in cordierite matrix lead to decrease of pores and then enhance the densification of (Cu/Cor) composite

تصنيع ودراسة خصائص كاشف المفرق الهجين CdO/Porous Silicon

Author name: عبد الله محمود علي الجبوري
Supervisor name: نادر فاضل حبوبي | رائد عبد الوهاب اسماعيل
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: في هذا البحث، تم ترسيب اغشيةCdO على السليكون المسامي وعلى شرائح زجاجية بطريقة الاكسدة الحرارية السريعة(Rapid Thermal Oxidation) وذلك لدراسة الخصائص التركيبية والكهربائية والبصرية لهذه الاغشية. تم تصنيع كاشف المفرق الهجين نوع CdO/Porous Silicon من خلال الاكسدة الحرارية السريعة لمادة الكادميوم المرسبة على السليكون المسامي ,تم دراسة الخصائص الكهربائية والتركيبية والفولطائية الضوئية لهذه الكواشف من خللال قياسات تيار - جهد وسعة - جهد. تم استخدام التنميش الكهروكيمياوي للسليكون حيث تمت السيطرة على المسامية بتغيير كثافة تيار التنميش وزمن التنميش. لقد اوضحت النتائج ان معلمات الكاشف تعتمد بشكل كبيركثافة تيار التنميش وزمن التنميش. ان اقل قيمة لعامل المثالية التي تم الحصول عليه كانت 1.28 وذلك للكواشف المصنعة بكثافة تيار40 ملي امبير/سم2 وزمن تنميش 600 ثانية .لقد اوضحت نتائج الكفاءة الكمية اي الكواشف المصنعة تمتلك قمتين الاولى تمتص عند المنطقة المحصورة بين اوكسبد الكادميوم والسليكون المسامي اما المنطقة الثانية ناتجة بسبب الامتصاص عندالسليكون البلوري والسليكون المسامي. قيمة الكفاءة الكمية عند المنطقة الاولى كانت بحدود 77% عند الطول الموجي 550 نانومتر بينما الثانية كانت بحدود 88% عند الطول الموجي 700نانومتر. اعلى قيمة للكشفية النوعية كانت بحدود 87 عند الطول الموجي 550 نانومتر للكواشف المصنعة بكثافة تيار 30 ملي امبير/سم2 وزمن تنميش 2400 ثانية. كل الكواشف المصنعة تعمل للمدى الطيفي ( 400 - 900 ) نانومتر. اعلى قيمة لتياردائرة القصر كانت 19 مايكروامبير واعلى قيمة لفولتية الدائرة المفتوحة 420 ملي فولت للكواشف المصنعة. | In this work, CdO thin films are deposited on porous silicon and clean glass substrates by rapid thermal oxidation (RTO) to study structural, electrical and optical properties of these films. CdO/porous Si heterojunction photodetectors have been fabricated by rapid thermal oxidation (RTO) of Cd on porous and are presented. Structural, electrical, and photovoltaic properties of CdO/P - Si heterojunctions prepared by (RTO) on single - crystal p - type and monocrystalline silicon (111) substrates are examined with J - V the C - V methods. The electrochemical etching process was adopted as a technique to control the porosity of silicon wafer by controlling the time of etching in the range (600 - 2400s), and by controlling the etching current density. The results revealed that all our detectors’ parameters are highly dependant on etching time and etching current density. The minimum value of ideality factor is 1.28 for the detectors prepared with etching current density of 40mA/cm2 for 600s. The results of quantum efficiency show that these detectors have two depletion regions, the first one between CdO film and porous silicon layer, the second between the latter and the crystalline silicon. The first peak of quantum efficiency curve is 77% at a wavelength of 550nm while the second one is 88% at 700nm. The maximum specific detectivity was of wavelength 550nm for the detectors fabricated with etching current density of 40mA/cm2 and etching time of 2400s. All detectors are working on the spectrum region 400 - 900nm. The maximum Isc and Voc are 19A, 420mV respectively for the detectors fabricated with etching current density 30mA/cm2 and etching time 1200s

تحضير ودراسة خصائص ZnO : Al على قواعد مختلفه كمتحسس غازي == Preparing and studying characterization of ZnO : Al with different substrates for gas sensor

Author name: ضيدان خلف كافي
Supervisor name: رعد سعدون صبري
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: تم في هذا البحث دراسة الخصائص البصرية والكهربائية والتحسسية لاغشية (ZnO) النقية والمشوبة بالالمنيوم (Al) بالنسب (1%,3%) المحضرة بطريقة الرش الكيميائي الحراري, والتي رسبت على قواعد زجاجية وسليكون وسليكون مسامي بدرجة حرارة (773±10oK)., وبسمك (350±10)nm.ولقد تم تحضير السليكون المسامي بواسطة الانوده الكهروكيميائيه على رقائق من السليكون نوع p type (100)بينت فحوصات نمط الحيود للاشعة السينية (XRD) لتشخيص طبيعة تبلور الاغشية المحضرة, حيث اظهرت النتائج ان جميع الاغشية المحضرة ذات تركيب متعدد التبلور من نوع سداسي hexagonal)).مع اتجاهيه (002 ) ومن خلال قياسات ماسح القوة الذرية AFM وقياسات المجهرالالكتروني الماسح SEM تم التعرف على تاثير القواعد المستخدمة على جميع خواص الاغشية, كما تبين من نتائج التشويب ان زيادة التشويب تؤدي الى النقصان في الحجم الحبيبي حيث تناقص الحجم الحبيبي من (39.38) الى (30.22) في حالة التشويب بنسبة 3% اشتملت الرسالة دراسة الخواص البصرية لاغشية اوكسيد الزنك النقية(ZnO) والمشوبة بالالمنيوم (AZO) على دراسة طيف النفاذيه (T᷊) لاغشية المحضرة حيث بينت النتائج ان اعلى نفاذيه تم الحصول عليها هي(85%) عند الاغشية غير المشوبة بينما كانت النفاذيه للاغشية المشوبة( %80) ولمدى اطوال موجيه300 - 900)nm.) , وتبين ايضا ان الامتصاصية بشكل عام تزداد بزيادة نسب التشويب لتصل اعلى قيمة عند النسبه3% بزيادة نسبة التشويب. تم حساب فجوات الطاقة البصرية للاغشية المشوبة وغير المشوبة وتبين ان فجوة الطاقة تقل بزيادة نسبة التشويب الى ان تصل الى اقل قيمة عند نسبة التشويب (3%). وكانت فجوة الطاقة Egتتراوح من(3.3eV)الى(3.1eV) بزيادة نسب التشويب. اظهرت القياسات الكهربائية ان التوصيلية الكهربائية المستمرة تزداد بزيادة نسبة التشويب لتصل اقصى قيمة عند النسبه 3% مع زيادة نسبة التشويب . وبينت القياسات ان الاغشية كافة تمتلك طاقتين للتنشيط (Ea1) و(Ea2) تقل قيمتهما بزيادة نسبة التشويب. كما بينت خصائص( تيار - فولتيه) ان الاغشيه تمتلك عامل مثاليه (2.3) للاغشيه المرسبة على السيلكون و(1.28) للاغشيه المرسبه على السيليكون المسامي . اما خصائص التحسسية لجميع الاغشية المحضره كانت تقاس بعد تعريضها الى( (750 ppm من بخار الايثانول والميثانول عند درجة حراره 473K. النتائج العملية بينت ان اغشية اوكسيد الزنك المشوبة بالالمنيوم والمرسبة على قواعد زجاجية وشرائح من السليكون وسليكون مسامي تحسن التحسسية لتلك الاغشية لبخار الايثانول والميثانول كما تبين ان افضل نتيجة سجلت كانت لاغشية AZO/PS المشوبة بنسبة 3% حيث كانت (37%) لبخار الايثانول و(35%)لبخار الميثانول بالاضافة الى ذلك تبين ان التحسسية لها علاقة نسبية لدرجات الحرارة وكمية الغاز. | In the present work, structural, optical, electrical and sensing properties have been studied for undoped and Al doped zinc oxide (ZnO) thin films with different aluminum doping concentrations (1% and 3% ) prepared by a chemical spray pyrolysis technique, deposited on glass, silicon, and porous silicon substrate at temperature (773±10)oK with (350±10)nm thickness, The porous silicon (PS) substrates were formed by electrochemical anodization on p - type (100) silicon wafer. The X - ray diffraction technique has showed that all prepared films are polycrystalline structure type of hexagonal wurtzite with preferential orientation of plan (002) direction .Surface analysis by SEM and AFM have been used to understand the effect of the substrate on morphology properties of the samples. The doping resulted in decreasing grain size i.e deteriorates the crystallinity of the films from (39.38nm)of pure ZnO to (30.22nm) of AZO(3%) doped. The measurements of optical properties transmittance of undoped and Al doped ZnO films show that higher transmittance was (85%) for undoped ZnO films while (80 % ) for doped Al films within wavelength range (300 - 900nm). Also the results have showed that absorbance increases with doping to reach maximum value at 3% concentration .The energy gap of ZnO was calculated for undoped and doped films .It is noticed that the energy gap decreases with the increases of doping until it reaches the minimum value at 3% doping concentration . The results of electrical properties have showed that direct current (D.C) conductivity increases by increasing doping to reach maximum value at 3% doping concentration. The results have showed that the films have two activation energy Ea1 and Ea2 . from I - V characteristics it's found that the minimum ideality factors (n =2.3) for AZO/Si and (n=1.28)for AZO/PS of the prepared heterojunction are observed in the interim bias voltage range. The sensing properties for all undoped and doped films were measured after films surface was exposed to 750 ppm from vapor ethanol and methanol gas at temperature of 473ºK . The experimental results of Al doping of zinc oxide thin films with different aluminum doping concentrations (1% and 3% ) which deposited on glass, silicon, and porous silicon substrate showed a good sensitivity to ethanol and methanol vapor. Also the influence of variation of Al concentration and type substrate on ethanol and methanol vapor sensitivity of thin film sensor elements was investigated in this work. Therefore , doping percentage ZnO : Al/PS of 3% concentration recorded the best result 37% for ethanol , 35% for methanol, thus the AZO/PS films are a good sensor for ethanol and methanol vapors. In addition ,the sensitivity is directly proportional with the operation temperature for limited range. In general the sensitivity increases by increasing the concentration of ethanol and methanol vapors with increasing temperature degree

دراسة الصفات الحرارية والميكانيكية وعمر الاداء PVC لبوليمر == Study of the Thermal, Mechanical Properties and Lifetime of PVC Polymer

Author name: صهيب صباح احمد
Supervisor name: وداد حمدي جاسم | محمد عبد النبي ثجيل
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: In this work, mechanical behavior of PVC product like pipes with different origins (K.S.A and Egypt) and Turkey doors with different manufacturing (Nova and Firat) which are used in Iraqi markets were studied.The objective of this work was to study the mechanical properties like ultimate tensile strength, Young's modulus, elongation at Max., elongation at break, impact strength, flexural strength and hardness of the pipes and doors.The experimental results show that K.S.A pipes exhibited maximum ultimate tensile strength and Young's modulus than that the Egypt pipes.However, the Egypt pipes exhibited maximum elongation at Max. and elongation at break when compared with K.S.A pipes.All the tensile properties of Firat doors are greater than that of Nova doors.Comparison of the flexural strength of pipes and doors. The pipes have the same flexural strength but the Firat doors have maximum value than Nova doors.Egypt pipes have a higher impact strength than K.S.A pipes. While the Firat doors have a higher impact strength than Nova doors. The experimental results of hardness Shore D indicated that K.S.A pipes exhibited maximum hardness number (83.7) than Egypt one, while the Firat and Nova doors have the same values.In this study, thermal properties of Firat and Nova have been evaluated, firstly by thermal conductivity and second by thermal stability and degradation. The Firat doors have better thermal conductivity than that of Nova doors. From the thermogravimetric analysis at different heating rates (2, 5, 10, 20 and 40 °C/min). The Firat doors have a higher thermal stability than Nova one.The Egypt pipes exhibited more thermal stability than the K.S.A pipes.From the TGA curves the activation energy of pipes and doors are determined at different conversion levels. At 30% conversion level when the mechanism of degradation would be stable and the value of activation energy of Egypt pipes and Firat doors is (108.35 KJ/mole) when it is (101.39 KJ/mole) for K.S.A pipes and (98.35 KJ/mole) for Nova doors. Thermogravimetric analysis (TGA) provides a method for accelerating the lifetime testing of polymers so that short - term experiments can be used to predict in use lifetime.The lifetime is decreased with increase of the temperature, at fixed temperature like 70 °C the lifetime of Egypt pipes is (≈100 years) while lifetime of K.S.A pipes is (≈21 years). At the same temperature (70 °C) the lifetime of Firat doors is (≈72 years) while the lifetime of Nova doors is (≈21 years).Thermomechanical analysis (TMA) test showed the glass transition temperature (Tg) and softening point (Ts) for pipes and doors. The K.S.A pipes have value for Tg and Ts higher than that of Egypt pipes, while the Firat and Nova doors have the same values.

دراسة طيفية ونظرية لمشتقات النايترون Nitron == Theorettiicall and Specttroscopiic Sttudiies off Niittron Deriivattiives

Author name: صلاح محمد علي رضا
Supervisor name: زياد عدنان صالح | فريال ولي عسكر
General topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: The main purpose of this thesis was to perform computational investigations on Nitron compound and its derivative( Nitro - Nitron) using Density Functional Theory (DFT) at an appropriate high level of theory and comparison with experimental data, in order to get better insight into the structures and energetic features of these compounds. The DFT calculations have been performed using Gaussian 09 program with GUI(Graphical User Interface) called Gaussview 5.08. The present study is separated in three parts, in part I, optimized geometrical parameters, vibrational frequencies, electronic maximum absorption wavelength in gas phase and solvent case (chloroform), and frontier orbitals (HOMO - LUMO), electrostatic potential surface (EPS), Mullikan and Natural atomic charge distributions of 1,4 - diphenyl - 3 - (phenylammonio) - 1H - 1,2,4 - triazolium(inner salt), (C20H16N4), commonly well - known as Nitron, were calculated by using DFT/B3LYP method with 6 - 311G(d,p) basis set. The Fourier Transform - Infrared (FT - IR) solid phase spectrum of the title compound was recorded in the spectral range (4000 - 400) cm - 1. The difference between the scaled wavenumbers and the observed values of most of the vibrational modes is nearly small. The UV - Vis spectrum was measured in the spectral range (200 - 800) nm in chloroform solution. The theoretical electronic (UV - Vis) spectrum calculated using the TD - DFT(C - PCM) method with chloroform solvent is more suitable than the gas phase to the experimental spectrum. The calculated HOMO and LUMO energies show that charge transfer occurs within the molecule.In part II of this thesis, the synthesis and characterization of a novel compound, (1,4 - Diphenyl - 3 - (p - nitrophenylamino) - 1,2,4 - triazolium hydroxide inner salt (Nitro - Nitron), (C20H15N5O2) were reported. The spectroscopic investigations of the novel compound were studied by 1H NMR, FT - IR, UV/Vis techniques. The 1H NMR spectra were recorded in DMSO solution. FT - IR spectrum in solid state was observed in the region 4000 - 400 cm - 1. The UV/Vis absorption spectrum of the compound which dissolved in chloroform was recorded in the range 200 - 800 nm. The structural data, fundamental vibrational modes, 1H NMR chemical shifts, frontier orbital energies(HOMO,LUMO), electrostatic potential surface (EPS), Mullikan and Natural atomic charge distributions, and band gap energy of the compound in the ground state were calculated using density functional theory(DFT) employing B3LYP/6 - 311G(d,p) basis set. The HOMO and LUMO analysis were used to elucidate information regarding charge transfer within the molecule. Based on the optimized geometry and by using time - dependent density functional theory (TD - DFT) methods in vacuum and solution(chloroform), the allowed excitation and oscillator strengths of electronic absorption spectrum were predicted. The solvation effects have been included by means of the conductor - like polarizable continuum model CPCM. chemical shifts were calculated using the Gauge - Independent Ato mic Orbital (GIOAO) method. In part III, The results of Hall effect and D.C electrical conductivity studies of the Nitron and its derivative (Nitro - Nitron) compounds are described in this part. The temperature dependence of semi - conductivity is also described. The values of carriers concentration, mobility, conductivity, resistivity, Hall coefficient, and thermal activation energy, are also presented.Finally, a comparison between the experimental data and the calculated results of three parts of this thesis appeared a good agreement

التركيب المورفولوجي والخواص البصرية لاغشية In2O3 الرقيقة == Morphology Structural and Optical Properties of In2O3 Thin Films

Author name: شيماء احمد كاظم
Supervisor name: علية عبد المحسن شهاب
General topic: Physics
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: يتناول هذا البحث دراسة تاثير تغير زمن الاكسدة ودرجة حرارة التلدين على الخصائص التركيبية والبصرية لاغشية اوكسيد الانديوم الثلاثي (In2O3) الرقيقة التي تم تحضيرها بتقنية التبخير الحراري في الفراغ ، حيث تم ترسيب معدن الانديوم (In) على قواعد من الزجاج واخرى من السليكون بدرجة حرارة الغرفة (300 K) وبسمك (400 ± 10 nm) وبمعدل ترسيب 5.47 ± 0.5 nm/sec)) ، ومن ثم اكسدة اغشية (In) المحضرة حراريا بدرجة حرارة (673 K) وبوجود الهواء وبزمن مختلف (ساعة ، ساعة ونصف ، ساعتان) ، بعد ذلك تم اجراء التلدين بدرجات حرارة مختلفة K (323 , 373 , 423) على اغشية (In2O3) المؤكسدة بزمن ساعة واحدة باعتبار ان هذا الزمن هو افضل زمن اكسدة من ناحية قيم فجوة الطاقة البصرية والحجم الحبيبي والخشونة ومعدل الخشونة . درست الخصائص التركيبية للاغشية المحضرة (قبل التلدين وبعده) عن طريق تقنية حيود الاشعة السينية (XRD) التي اظهرت ان هذه الاغشية ذات تركيب بلوري متعدد ومن نوع مكعب ، وكذلك تم استخدام مجهر القوة الذرية (AFM) والمجهر الالكتروني الماسح (SEM) لدراسة طوبوغرافية السطح من ناحية التجانس والخشونة ومعدل الخشونة . درست الخصائص البصرية للاغشية المحضرة (قبل التلدين وبعده) باستخدام المطياف البصري (Optical Spectrometer) ، حيث تم حساب فجوة الطاقة البصرية والتي كانت ذات قيمة اقل عند زمن اكسدة ساعة وعند درجة تلدين (323 K) ، بالاضافة الى دراسة طيف كل من الامتصاصية والنفاذية والانعكاسية ، وايضا تم حساب الثوابت البصرية وهي : معامل الامتصاص ، معامل الانكسار ، معامل الخمود ، ثابت العزل بجزئيه الحقيقي والخيالي كدالة لطاقة الفوتون ، وقد بينت النتائج ان زيادة قيم هذه الثوابت متعلقة بزيادة زمن الاكسدة ودرجة حرارة التلدين. | This research examines the effect of changing time of oxidation and the degree of annealing temperature on the structural and optical properties of membranes dioxide triple indium (In2O3 thin) that was prepared technology thermal evaporation in a vacuum, where the deposition of metal indium (In) on the glass and silicon substrate at room temperature (300 K) and thickness (400 ± 10 nm) and the rate of deposition of (5.47 ± 0.5 nm / sec) , and then oxidation films (In) prepared thermally and the presence of air at a different (hour, hour and a half, two hours) , then annealing was performed at different temperatures (323, 373, 423) K films (In2O3) oxidizing a time of one hour, considering that this time is the best time of antioxidants in terms of optical energy gap and grain size and roughness values and the rate of roughness . Structural properties of prepared films have been studied (before and after annealing) by X - ray diffraction technique (XRD) which showed that these films with the structure of crystalline multi it cubic type, as well as the use of an atomic force microscope (AFM) and electron microscopy scanner (SEM) to study the topography of the surface in terms of homogeneity and roughness and the rate of roughness . Optical properties of prepared films have been studied (before and after annealing) using the optical spectrometer, where the optical energy gap , and which were less valuable when oxidation hour time account and at a temperature annealing (323 K) , in addition to the study of spectrum both absorbance and transmittance and reflectivity , and was also the optical constants account : the absorption coefficient, refractive index, extinction coefficient, dielectric constant real and imaginary as a function of photon energy, the results have been shown to increase the values of these constants related to increased oxidation time and the annealing temperature.
1 2 3 4 5