عرض: 25 50 75 100 النتائج

نتائج البحث: 25 من أصل 11,955

تاثير زيادة النسب الحجمية للكادميوم على الخصائص التركيبية والبصرية لاغشية اوكسيد الخارصين The effect of increasing the volumetric ratios of Cadmium on the Structure and optical properties for Zinc Oxide Films

اسم المؤلف: هدى نجم عبد
اسم المشرف: خضير عباس مشجل
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الاغشية الرقيقة
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: حضرت اغشية اوكسيد الخارصين (ZnO) غير المشوبة، والمشوبة بالكادميوم (ZnO : Cd)، وبنسب تشويب مختلفة (2, 4,6, 8) %،حضرت بتقنية التحلل الكيميائي الحراري هذه الاغشية ر’سبت على قواعد ساخنة من الزجاج بدرجة حرارة (673°K)، وبسمك ((400  20 nm. بينت نتائج حيود الاشعة السينية ان كافة الاغشية المحضرة كانت متعددة التبلور، وتمتلك تركيبا من النوع السداسي المحكم، والاتجاه السائد (002) وعندالتشويب بالكادميوم يتغير الاتجاه السائد الى (101), ان معدل حجم البلوريات في حالة التشويب يقل من (22nm) الى (17nm) عند زيادة نسبة التشويب. كذلك بينت صور مجهر القوة الذرية (AFM) ان هنالك اختلافا في طبيعة سطوح الاغشية المحضرة، وان قيم معدل الحجم الحبيبي يقل مع زيادة نسبة التشويب من (99nm) الى (71nm) . ان قيم معدل خشونة السطح وقيم الجذر التربيعي لمربع متوسط الخشونة (RMS) تقل مع زيادة نسبة التشويب للاغشية المحضرة ومن ملاحظة الصورنستنتج ظهور بعض التراكيب النانوية للاغشية المحضرة.وتمت دراسة الخصائص البصرية للاغشية من خلال تسجيل طيفي النفاذية، والامتصاصية، ولمدى الاطوال الموجية (400 - 900nm)، وقد وجد ان اعظم قيمة للنفاذية هي (82%) عند الاغشية غير المشوبة, وكما وجد ان فجوة الطاقة البصرية للانتقال الالكتروني المباشر المسموح للاغشية غير المشوبة (3.20eV)، وتقل قيمتها الى (3.10 eV) عند نسبة التشويب (8%) على العكس من طاقة اورباخ التي تزداد مع زيادة نسبة التشويب فكانت للاغشية غيرالمشوبة (350 meV) وعند نسبة تشويب (8%) وصلت الى (826 meV)،كما تم حساب الثوابت البصرية للاغشية المحضرة التي تتضمن معامل الانكسار, معامل الخمود, ثابت العازل الكهربائي بجزئيه الحقيقي والخيالي بوصفها دالة للطول الموجي، ان جميع هذه الثوابت تزداد مع زيادة نسبة التشويب، اما قيم الانعكاسية كدالة للطول الموجي فقد تم حسابها من طيف النفاذية والامتصاصية فانها تزداد بزيادة التشويب, اما بالنسبة لمعامل الامتصاص كدالة لطاقة الفوتون فانه يزداد بزيادة التشويب ان اضافة الكادميوم ادى الى تغيير في الخصائص التركيبية والبصرية لاغشية اوكسيد الخارصين. | Study undoped zinc oxide films (ZnO) and doped with Cadmium (ZnO : Cd) by different percentage doping (2,4,6,8)% which have been prepared by chemical spray pyrolysis technique, on the glass substrates heated at (673◦K) with thickness was of (400 ± 20)nm. The (XRD) investigation showed that ZnO films were polycrystalline and have a hexangonal wurtzite structure with a preferred orientation along (002) plane, and doping of Cadmium change the orientation along (101). the average crystallite from doping was decreased from (22nm) to (17nm) by increasing percentage doping .also the (AFM) images showed different in topography of the prepared films, and the grain size decreased with increasing percentage doping from (99 to 71 nm) .as the average surface roughness and root mean square values (RMS) decreased with increasing percentage doping prepared films, from these picture the results we conclude that have nanostructure prepared films. And the study optical properties films from The absorbance and transmittance spectra have been recorded in the wavelength rang of (400 - 900)nm,It was found that the maximum transmittance to (82%) for pure films. and the optical energy gap of direct allowed transition was (3.20eV) for pure and decrease the value reach (3.10eV) percentage doping (8%), its on the contrary of Urbach energy their values were increase as the doping percentage increase and equal to (350meV) for pure and percentage doping (8%) reached to (826meV), The calculated optical constants prepared films including refractive index , extinction coefficient, real and imaginary part of dielectric as a function of wavelenght,all these constants are increase with the increase of doping percentage, The reflectance values as a function of wavelength have been recorded from the absorbance and transmittance spectra are increase for increase doping. While the absorption coefficient as afunction of photon energy is increase for all doping percentage, the addition of cadmium changes the structural and optical properties for the film Zinc oxide .

تخمين مسافات الاجسام باعتماد تقنية المعالجة الصورية با ستخدام المؤشرات الليزرية Objects Distance Estimation Using Image Processing Technique Based on Laser Pointers

اسم المؤلف: هدى محمد جواد المولاوي
اسم المشرف: علي عبد داود الزكي
الموضوع العام: علوم الفيزياء
السنة: 2011
الموضوع الدقيق: معالجة الصور
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ازدادت اهمية تحديد المدى وابعاد الاجسام عن بعد خلال العقود الاخيرة خصوصا" في الانظمة الروبورتية وانظمة السيطرة الصناعية. لذا توجهنا في دراستنا الحالية الى استخدام المؤشرات الليزرية مع الكاميرا الرقمية لتحديد ابعاد الاجسام ومدياتها عن بعد والعمل في هذه الدراسة ينقسم الى تحديد ابعاد الاجسام في مشهد الصورة الرقمية باستخدام مؤشرليزري، تحديد مديات الاجسام باستخدام صور البقعة الليزرية لمؤشر ليزري واحد حيث تم استخدام عمليات النمذجة لغرض استنتاج موديلات مناسبة لذلك وتحديد مديات الاجسام باستخدام صور لبقعتين ليزريتن في مشهد الصورة وذلك باستخدام عمليات نمذجة مختلفة لمعاملات مختلفة لغرض الحصول على انسب الموديلات الرياضية لتمثيل الحالات الفيزيائية لمشهد البقع الليزرية لغرض ايجاد طريقة سهلة ودقيقة لتحديد مسافات الاجسام. تم انجاز هذه الطرق من خلال بناء خمسة خوارزميات حاسوبية تعتمد على هندسية التقاط الصور للبقع الليزرية الساقطة على الاجسام البعيدة. وتم اختيار هذه الخوارزميات لمسافات الاجسام المختلفة عن الكاميرا تتراوح بين (2 7 - م). ولقد اظهرت النتائج وعمليات النمذجة التي تم تنفيذها باستخدام برنامج Table curve)) ان تقنيات تحديد ابعاد الاجسام بالاعتماد على الكاميرا ومؤشرين ليزريين المسافة بينهما معلومة ( 8سم) اعطت نتائج تمثلت في حالتين. الحالة الاولى عندما تكون قوة تكبير الكاميرا متغيرة لمسافة ثابتة عن الاجسام مقدارها (7م) حيث تم التقاط عدة صورللاجسام ومن خلال تحليل هذه الصورتم الحصول على نتائج جيدة حيث كانت الابعاد المقاسة قريبة جدا للابعاد الحقيقية. الحالة الثانية تمت بتثبيت قوة تكبير الكاميرا والمسافة عن الاجسام كانت متغيرة. اعطت الحالة الثانية نتائج افضل من الاولى.تمت عملية قياس المسافة بطريقتين، الاولى كانت باستخدام مؤشر ليزري واحد وكاميرا وهذه الطريقة تتفرع الى جزئين الجزء الاول عندما تكون قوة تكبير الكاميرا على اصغر قوة ولمسافات مختلفة ( 2 - 7م ) تتغير المسافة لكل حالة ( 1م). تم التقاط عدد من الصور ومن خلال تحليل الصور تم حساب انصاف اقطار البقعة اليزرية وعدد ( pixels) في البقعة اليزرية ومن خلالها تم الحصول على منحنيات عيارية لتخمين المسافة وقد اعطت نتائج جيدة حيث تم الحصول على معادلة قياسية لتحديد المسافة من برنامج ( table curve ) بنسبة خطا مساوية للصفر تقريبا". الجزء الثاني تمثل بحالة التكبيرللكاميرا على اكبر قوة ولمسافات مختلفة ( 2 - 7 م ) تتغير المسافة لكل حالة (1م). تم في هذا الجزء التقاط عدد من الصور ومن خلال تحليل الصور تم الحصول على نتائج جيدة وقريبة الى القياسات الحقيقية. كانت نتائج الجزء الاول افضل من الثاني لان نسبة الخطا مساوية تقريبا للصفر. الطريقة الثانية تمثلت باستخدام مؤشرين ليزريين وكاميرا وهذه الطريقة ايضا تنقسم الى قسمين الاولى عندما تكون قوة تكبير الكاميرا على اصغر قوة ولمسافات مختلفة (2 - 7م ) تتغير المسافة لكل حالة( 1م ) تم خلالها التقاط عدد من الصور وبعد تحليل الصور تم حساب انصاف اقطار البقعة اليزرية ،حساب عامل التدرج ( Scf ) ،حساب انصاف اقطار البقعة اليزرية وعدد ( pixels) في البقعة اليزرية ومن خلالها تم الحصول على منحنيات عيارية لتخمين المسافة وقد اعطت هذه الطريقة نتائج جيدة . تم الحصول على معادلة قياسية لتحديد المسافة من برنامج ( table curve ) وكانت نسبة الخطا مساوية للصفر تقريبا". الجزء الثاني تمثل بنفس الخطوات السابقة مع وضع قوة التكبير الكاميرا على اكبر قوة وهنا ابضا الجزء الاول افضل من الجزء الثاني لان نسبة الخطا تقريبا كانت صفرا" ولكن الطريقة الثانية كانت افضل من الاولى لوجود عامل التدرج فيها. | Over recent decades, the importance of determination the extent and dimensions of objects remotely has been increased especially in the regulations robot and control systems industry. So, the use of indicators laser with a digital camera have been used in the current study to determine the dimensions of objects and their distances. In this study is divided to determine the dimensions of objects in a scene of the digital image by using the laser pointer, and determine the ranges of objects using the laser photo spot for a single pointer where a modeling process for the purpose of finding the suitable models for this task has been used and finally determine the ranges of objects using the images of two laser spots in a scene of an image by using different modeling operations for different transactions for the purpose of obtaining the most suitable mathematical models to represent the physical cases of the speckle laser scene in order to find an easy and accurate way to determine the distances of objects. This has been done through the construction of five algorithms based on the engineering way to take photos of laser spots that fall on the distant object. The selected algorithms for the distances of objects from the camera are in the range (2 - 7m). Results and modeling operations that have been implemented using table curve program have shown that the techniques for the determination of objects dimensions gave the results represented in two cases depending on the camera and two laser indicators with known distance between them (8cm). The first case when the power zoom of camera is variable for a fixed distance from objects of (7m) where several photo images were taken and through the analysis of these images, good results have been obtained where the measured dimensions are very close to the real one. The second case has been performed by installing the power zoom of the camera with a variable distance from the objects. The second case gave better results than the first one.The process of measuring the distance has been done in two ways, the first is by using a single laser pointer with a camera, this method subdivided into two parts; the first part when the power zoom of the camera on a smaller power with different distances (2 - 7m) changing the distance of each case (1m). Through the analysis of images, the radii for laser spot and the number (pixels) in this spot have been calculated. So, a normative curves to guess the distance give good results where a standard equation to determine the distance from the program (table curve) with an error equal to almost zero was obtained.The second part represents the biggest power zoom of the camera with different distances (2 - 7m) changing the distance of each case (1m). In this section, number of images has been captured and through the analysis, good results were obtained which are close to the real measurements. The results of the first part are better than the second because the margin of error is nearly equal to zero. The second way represented by using two laser indicators and a camera and this way was also divided into two parts; the first when the zoom of the camera in a smaller power with different distances (2 - 7m) changing the distance of each case (1m), which capture a number of images and after the analysis process, the calculation of the radii of laser spot, the factor gradient (Scf), radii laser spot and a number (pixels) in the laser spot have been measured which were obtained standard curves to estimate the distance of this method that gives good results. A standard formula to determine the distance from the program (table curve) was obtained and the rate of error is equal to almost zero. The second part represents the same previous steps with a power zoom of the camera on its top power and the first part is better than the second one because the rate of errors was almost zero, but the second method was better than the first because of the gradient factor.

دراسة العمق البصري للعوالق في منطقتين من العراق باستخدام تقنيات معالجة الصور الرقمية Study the Aerosol Optical Depth in Two Regions of Iraq Using Digital Image Processing Techniques

اسم المؤلف: هدى عبد الامير عـبود الزهيري
اسم المشرف: علي عبد داود الزكي
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: معالجة الصور
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يتميز تلوث الهواء عن غيره من اشكال التلوث في انه سريع الانتشار حيث لا يقصر تاثيره على منطقة المصدر وانما يمتد الى المناطق المجاورة والبعيدة. يعتبر الهباء الجوي من اكثر ملوثات الهواء شيوعا وخاصة في المناطق الجافـة والصناعية والمناطق المكتظة بحركة مرورية، اذ يمكن ان تكون من اصول طبيعية او غير طبيعية، لذلك تم الاهتمام في قياساتها ولكون كتلتها قليلة لذا تم دراستها على اساس حجـومها. توجهنا في دراستنا الحاليـة لاجراء تحليلات احصائية لمجموعة من الصور الملتقطـة بجهاز الميكروسكوب للهباء المترسب على شرائح زجاجية حيث تم جمعها في ايام مختلفة وفي اشهر مختلفة وفي منطقتين هما (بغـداد : شارع فلسطيـن، وديالـى : الخالـص).اجريت دراسة تحليلية لنسب الهباء المترسب كدالة للزمن في اليوم الواحد وتم مقارنة نتائج المنطقتين وتحديد الفروق بينهما. استخدمت طريقتين بعدة خوارزمات احصائية مختلفة الاولى بحساب مساحة الهباء الجوي المترسب في مستوي الصورة والثانية بحساب حافة جسيم الهباء في مستوي الصورة.ثم حساب انصاف اقطار ومساحات واحجام هذه الجسيمات في الصورة لغرض تصنيفها كدالة لانصاف اقطارها. اهم النتائج التي حصلنا عليها هي معدل المساحة المغطات واختلافها بين المنطقتين (اذ تكون في بغداد اكثر من الخالص وهذا يعود الى طبيعة المنطقة وصفاتها). واظهرت الدراسة تاثير تغير سرعة الرياح على الهباء في الجو وعلى ترسبه طبقا لاحجامها. كذلك اختلاف نسب الترسب لساعات اليوم الواحد وايضا اختلافها بين المنطقتين. استحدثت طريقة جديدة لغرض حساب مساحة وحجم جسيمات الهباء الجوي بالاعتماد على تقنيات معالجة الصور الرقمية. تاخذ بنظر الاعتبار اشكال الجسيمات كروية ,طولية (منتظمة وغير منتظمة) ومتشعبة . ان التقنية المقترحة اظهرت كفاءة عالية واكثر فاعلية في حساب احصائيات التوزيع الحجمي لجسيمات الهباء الجوي وتستمر لفترة اطول مقارنة مع الاجهزة الاخرى التي تفقد كفاءتها على مر الزمن .اضافة الى سهولة التطبيق وتعتبر طريقة جيدة ولاتحتاج الى اجهزة ذات كلفة عالية. | Air pollution differs from other types of pollution; as it is dispersed quickly, and its impact is not limited to the area of origin but rather extends out to the neighboring and distant areas. Aerosol is one of the most common air pollutants especially in the dry, industrial and traffic - congested areas. Its origin could be natural or unnatural, and thus measuring it has been an important issue. Due to its tiny mass, it has been studied on the basis of its sizes. This current study is presented as an analytical and statistics study on a set of images taken via optical microscope of aerosol deposited on glass slides, and collected for several days throughout different months at two different regions (Baghdad/ Palestine Street - and Diyala/ Al - Khalis). The analysis has been performed through studying variant proportions on several measurements of aerosol particles as a time functions, and subsequently the variance in results between the two regions was considered by analyzing the aerosol images. Two methods were used employing statistical algorithms; the first method was by calculating the deposited aerosol area on the image plane. While the second method was by measuring the aerosol particle edge on the image plane, and then measuring the radii, areas and volumes of these particles in the image, and eventually by classifying them as a function of their radii.One of the most significant results we obtained was the average covered area and its variance between the two regions. This average covered area was larger in Baghdad than in Khalis, and this is due to the nature of each region and its properties in addition, wind speed impact on the aerosol and on its deposition according to its size. Furthermore, the different results of deposition proportions are based on the hours of a day also the difference between two regions. Through the present work, a new method of measuring area and volume of deposited aerosol particles with their various shapes whether spherical, longitudinal or intertwined has been concluded depending on image processing techniques . These methods are considered as more effective, more efficient in calculating the statistic volumetric distribution of aerosol particles and last longer compared to other appliances that lose efficiency over time. In addition easily to apply and it’s consider a good method and doesn’t need expensive equipment.

دراسة بعض التطبيقات التحسسية لاغشية اوكسيد القصدير المشوبة بالانديوم Study Some Sensing Applications of Indium Tin Oxide(ITO)Thin Films

اسم المؤلف: هبة نوري ذاكر
اسم المشرف: علي جاسم محمد الجابري
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: الاغشية الرقيقة
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا البحث تم تحضير اغشية ثنائي اوكسيد القصدير SnO2 النقية والمشوبة بالانديوم (In ) وبنسب تشويب مختلفة (5,10,15) % بطريقة الرش الكيميائي الحراري حيث رسبت على قواعد زجاجية .الجزء الاول من البحث تضمن دراسة الخصائص الفيزيائية للاغشية المحضرة : التركيبية , الكهربائية والتحسسية (الكهرواجهادية والامبيرومترية) حيث درست بشكل مكثف.طبوغرافية السطح للاغشية درست بتوظيف حيود الاشعة السينية والمجهر الماسح الالكتروني (SEM) ومجهر القوة الذري (AFM) . تاثير كبير لتركيز ايونات الانديوم على طوبوغرافية السطح تمت ملاحظته , حيث ان صور مجهر القوة الذري بينت تاثير زيادة تركيز ايونات الانديوم على كل من الخشونة ومعدل الحجم الحبيبي , اضافة الى تناقص الحجم الحبيبي من 136.16 الى 73.53 نانومتر في حين ازدادت الخشونة من 1.04 الى 2.86 وهذا بسبب وجود عدد من الهضاب التي توزعت بشكل عشوائي على السطح. اثبتت قياسات حيود الاشعة السينية ان الاغشية المحضرة بالرش ذات تركيب متعدد التبلور من نوع رباعي (Tetragonal) وباتجاه تفضيلي عند المستوي ,(110)مع وجود ثلاث قمم صغرى تعود للمستويات 101)),(200),(200) وهذه القمم تصغر وتضمحل بزيادة نسبة الاشابة بالانديوم .درست الخصائص الكهربائية المتضمنة منحني (I - V) عند الظلام , فقد بينت النتائج ان التيار المستمر يزداد مع زيادة نسبة الاشابة بالانديوم .الجزء الثاني من البحث فقد تضمن دراسة خصائص التحسس للاغشية المحضرة وبالذات الخصائص الكهرواجهادية , وتم اجراء القياسات بتعريض الاغشية لموجات تضاغطية بمدى واسع من الترددات (1 kHz - 10 MHz) ولفولتية انحياز ضمن المدى (0 - 15 V) لثلاث اوساط : الهواء , الماء ومحلول الكلوكوز المائي , وتم تسجيل التردد الرنيني المناظر لكل قيمة من قيم تركيز الكلوكوز (0.05, 0.1, 0.15, 0.2, 0.25)% لكل من الاغشية النقية والمشوبة انفة الذكر.استنادا الى ماذكر اعلاه فان بلورة ثنائي اوكسيد القصدير واحدة من البلورات الكهرواجهادية وذلك من خلال الاستجابة الجيدة للاغشية للترددات الرنينية , لقد اجريت القياسات المذكورة لتراكيز مختلفة عند درجة حرارة الغرفة وقد وجد ان تيار التحسس يزداد بزيادة تركيز الكلوكوز ويتناقص مع زيادة نسبة الاشابة بالانديوم . تزداد الخصائص التحسسية الكهرواجهادية والتيار بازدياد نسب الكلوكوز وازدياد نسب الاشابة بالانديوم وافضل تحسس عند 15% من تركيز الاشابة بالانديوم | In the present work, undoped SnO2 films and doped with In films with various doping concentration 5, 10 and 15% are prepared in chemical spray deposition method in which the films are deposited on glass substrates. The first part of the work studies the physical properties of the as deposited pure and In doped SnO2 thin films, including . Structural, electrical, and sensing (piezoelectric and amperomtric) properties of these films have been studied intensively. The surface topography of the films is studied by using the X - ray diffraction,and the Scanning Electron Microscopy (SEM) and the Atomic Force Microscopy(AFM)the influence of the indium concentration on film surface morphology has been cosederd . Film roughness (RMS) and average grain size are affected by varying indium addition concentrations, XRD measurements have proven that the sprayed films are polycrystalline structural of a tetragonal type with the (110) plane as preferential crystallographic orientation for all prepared samples in addition to three small peaks belong to the (101), (200) and (211) planes, these peaks decrease and vanishe with increasing of doping concentration. The grain size decreases from 136.16 to73.53nm and the roughness incrrease from 1.04 to 2.86 nm for (5, 10and15)% due to the existence of many hillocks, which are faceted and distributed randomly on the relatively smooth surface.The electrical properties includ (I - V) current in the dark condition have been studied, the results show that direct current increase with the increase of doping concentration. The second part of the work studies the sensing properties of the prepared films in a special case, the sensitive characteristics (piezoelectric). The measurements are carried out by exposing the thin film to mechanical waves in a range of sweeping frequencies of (1 kHz - 10MHz) at bias voltage in the range of (0 - 15V). The characteristic resonance frequency is recorded, due to the glucose concentration of (0.05, 0.1, 0.15, 0.2 and 0.25) in aqueous solution for undoped and doped Indium (5wt.%, 10wt and 15wt.%). The results were showed conclusively that the SnO2 crystal is one of the most candidate piezoelectric crystals, namely that these thin films have good response for resonance frequency. The glucose sensing behavior of the films is observed for various concentrations at room temperature . The sensing current is found to be increase with the increase in the glucose concentration and decreased with increase in a doping concentration. The sensitivity properties for piezoelectric and current increase with increase glucose concentration and increase with increase doping concentration and the best sensitivity at 15% of Indium concentration.

تجزئة الصور الرقمية بواسطة الخوارزميات الجينية Digital Image Segmentation By Genetic Algorithms

اسم المؤلف: هبة خضير عباس الجبوري
اسم المشرف: علي عبد داود الزكي عبد الله احمد رشيد
الموضوع العام: علوم الفيزياء
السنة: 2006
الموضوع الدقيق: معالجة الصور
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تلعب التجزئة الصورية دورا مهما في الرؤية الحاسوبية (Computer Vision).هي : " تقسيم الصورة الرقمية الى مناطق هدفيه ، وذلك بتحديد المناطق الرقمية التي لها صفات متشابهة عن المناطق غير المتشابهة" . تعد مشكلة التجزئة الصورية من المشاكل التي يستخدم فيها الحل الامثل ،في هذا البحث تم استعمال طريقة الحل الامثل التي تعتمد على الخوارزمية الجينية Genetic Algorithm لايجاد التجزئة الصورية المثلى . منظومة التجزئة الصورية الجينية (GAIS) تحوي على جزئين : الجزء الاول : يعتمد على ايجاد القيمة المثلى باستعمال العامل الجيني (عامل التزاوجcrossover) فقط .الجزء الثاني : يعتمد على ايجاد القيمة المثلى باستعمال العوامل الجينية (عامل التزاوج crossover، عامل الطفرة mutation ). وهذه الطرائق المختلفة المقترحة قد اختبرت باستعمال صور ذات تدرج رمادي وصور ملونة وباحجام مختلفة ، وقد قورن بين هذه الطرائق . بين انجاز منظومة (GAIS) واعديه الخوارزمية الجينية ونجاحها في حل مشكلة التجزئة الصورية .فقد تضمن العمل الاعتماد على طريقة التصنيف باستعمال المسافة الدنيا وبينت نتائج الاختبار كفاءتها العالية على تصنيف مناطق الصورة . كما وتم الاعتماد على طريقة التجميع Clustering التقليدية وتطبيقها في الخوارزميات الجينية بالاعتماد على دالة الصلاحية المتمثلة بدالة (Minimum Distance) . وبينت النتائج امتلاك الخوارزميات الجينية كفاءة عالية جدا في تجزئة الصورة الرقمية . | Image segmentation plays an important role in computer vision . It is a process that partitions a digital image into several meaningful regions, by identifying regions of an image that have common properties while separating regions that are dissimilar . The image segmentation problem is posed as an optimization procedure .In this thesis, an optimization approach based on genetic algorithm is introduced for finding optimal image segmentation .The design and implementation of genetic algorithm image segmentor (GAIS ) system are described . GAIS consists of two main parts . The First one finds optimal value; using genetic operators such as ( Crossover operator only). The Second part of GAIS system employs finds optimal value ; using genetic operators ( Crossover operator and Mutation operator).The different proposed / implementation segmentation methods of the GAIS system were tested using Color and Gray image and different sizes . Results reported show good performance .Comparisons between different methods are also given . System performance shows that GA is promising for solving image segmentation problem and that a lot of work is expected in this field . That may be work content dependent on classification method by using minimum distance and to explain selection result high efficiency on image region. classification as, and to be complete dependent on a traditional assembly method and performance in GA by dependent on fitness function the represent by minimum distance (Error function) and to have GA with very high efficiency in segment digital image regions.

دراسة اثر التلدين وتغير السمك على الخصائص البصرية لاغشية اوكسيد النحاس (CuO) المحضرة بطريقة الترسيب الكيميائي الحراري The Study of The Effect of Annealing and Thickness Variation on The Optical Properties of Copper Oxide (CuO) Thin Films Prepared By Chemical Spray Pyrolysis

اسم المؤلف: هاله عبد الصاحب وادي موسى
اسم المشرف: نادر فاضل حبوبي خضير عباس مشجل
الموضوع العام: علوم الفيزياء
السنة: 2006
الموضوع الدقيق: الاغشية الرقيقة
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تتناول هذه الدراسة الخواص التركيبية والبصرية لاغشية اوكسيد النحاس CuO المحضرة بطريقة الترسيب الكيميائي الحراري على قواعد زجاجية ساخنة بدرجة حرارة اساس oC(350). ودراسة اثر التلدين بدرجات حرارية مختلفة oC (400, 450, 500, 550). وكذلك دراسة تاثير تغير السمك على الخواص البصرية للعينات مختلفة السمك (1000, 2500, 3000, 5000, 9000, 10500). فقد اظهرت نتائج حيود الاشعة السينية ان الاغشية المحضرة ذات تركيب متعدد التبلور، وقد اشتملت دراسة الخواص البصرية على تسجيل طيفي الامتصاصية والنفاذية للاغشية المحضرة لمدى الاطوال الموجية nm (300 - 900)، ومن ثم حساب فجوة الطاقة الممنوعة للانتقالات الالكترونية، اذ كانت قيم فجوة الطاقة الممنوعة للانتقال الالكتروني المباشر المسموح هي (2.85 - 1.95)eV وللانتقال غير المباشر المسموح هي (1.85 - 1.30)eV حيث ان فجوة الطاقة تقل تدريجيا كلمزااد السمك. اما عند تلدين اغشية CuO ذات السمك ( 3000) فان قيم فجوة الطاقة للانتقال المباشر المسموح هي (2.65 - 1.99)eV والانتقال غير المباشر المسموح هي (1.45 - 1.20)eV. وكذلك تم حساب ودراسة الامتصاصية، معامل الامتصاص، والانعكاسية والثوابت البصرية المتمثلة بــ(معامل الخمود، معامل الانكسار، ثابت العزل الكهربائي بجزيئة الحقيقي والخيالي، والتوصيلية الضوئية) كدالة لطاقة الفوتون، فقد اظهرت الدراسة ان التلدين وزيادة السمك للاغشية المحضرة تسبب في نقصان قيم فجوة الطاقة وزيادة في قيم كافة الثوابت البصرية. | This study deal with the structural and optical properties of copper oxide (CuO) thin films prepared on glass substrates heated to (350)oC using chemical spray pyrolysis techniques.The effect of annealing with different temperature (400, 450, 500, 550)oC have been studied. The effect of thickness variations (1000 - 10500) on the optical properties have been studied also.XRD analysis reveals that all the prepared thin films were polycrystalline. The absorbance and transmittance spectra in the wavelength range (300 - 900) nm, have been recorded the forbidden energy gap of the electronic transition were calculated, the value of the energy gap in the direct allowed transition for different thicknesses was (1.95 - 2.85)eV, and for the indirect allowed transition was (1.3 - 1.85)eV where the energy gap is decreased as the thicknesses increased. On the annealing of CuO thin films with (3000) thickness the energy gap of the direct allowed transition was varied from (1.99 - 2.65)eV and for the indirect allowed transition was varied from (1.2 - 1.45)eV The absorptance, absorption coefficient, reflectivity and the optical constants like extinction coefficient, refractive index, and dielectric constant in its two parts and conductivity as a function of photon energy were also calculated. The study raveled that annealing and the increase of thickness results in decreasing the energy gap and increase all the optical constants

دراسة تاثير تركيز المذيبات القطبية على بعض الخواص الطيفية لليزر عامل النوعية السلبي نوع (DOTCI) Study Effect of Concentration Polarity Solvents on Some Properties of Spectroscopy for Laser Passive Q - Switching Type (DOTCI

اسم المؤلف: هادي والي صاحب الصكر
اسم المشرف: محمد تقي حسين عبد الله احمد رشيد
الموضوع العام: علوم الفيزياء
السنة: 2008
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: لقد تمت دراسة اطياف الامتصاص والفلورة لليزر عامل النوعية نوع (DOTCI) واسمه العلمي (3,3Diethyl oxa tri carbocyanine Iodide) في المذيبين القطبيين (الايثانول والميثانول) على حده, وتحت ظروف طبيعية عند (درجة حرارة الغرفة) وللتراكيز الثلاثة (2x10 - 5 , 1x10 - 5 , 1x10 - 6) مولاري. ان الشدة النسبية لطيفي الامتصاص والفلورة تزداد مع زيادة التركيز وهذا ينطبق مع قانون بير - لامبرت. تم دراسة تاثير المذيبات القطبية (الايثانول والميثانول) على معامل الامتصاص المولاري, وقد بينت النتائج ان تاثير زيادة القطبية يؤدي الى نقصان الشدة. ولقد ازيحت اطياف الامتصاص والفلورة الى الاطوال الموجية القصيرة .(Blue Shift) وتم حساب ازاحة ستوك (Stoke Shift) لصبغة (DOTCI) حيث كانت تساوي (0.000041 nm - 1) للايثانول و(0.000039 nm - 1) للميثانول. كانت كفاءة الكمية لـ (DOTCI) عند التركيز الاول (2x10 - 5) مولاري في الايثانول والميثانول 88%) و75%) وزمن العمر الاشعاعي (29 و79) نانوثانية وزمن عمر الفلورة (25.52 و59.25) نانوثانية على التوالي, وكانت كفاءة الكمية عند التركيزالثاني (1x10 - 5) مولاري في الايثانول والميثانول 81%) و71%) وزمن العمر الاشعاعي (21 و67) نانوثانية وزمن عمر الفلورة (17.01 و47.57) نانوثانية وعلى التوالي, وكانت كفاءة الكمية عند التركيز الثالث (1x10 - 6) مولاري في الايثانول والميثانول 76%) و69%) وزمن العمر الاشعاعي (14 و60) نانوثانية وزمن عمر الفلورة (10.64 و41.4) نانوثانية وعلى التوالي. دلت الدراسة لاطياف الامتصاص والفلورة لليزر عامل النوعية (DOTCI) بان علاقة الكفاءة الكمية تتناسب طرديا مع زيادة التركيز وعكسيا مع زيادة قطبية المذيب | The Absorption and Fluorescence spectra have been studied for laser passive Q - Switching (DOTCI) (3,3Diethyl oxa tri carbocyanine Iodide) in two different polarity solvent (Ethanol & Methanol) separately under normal circumstances at (room temperature) for three concentration (2x10 - 5 , 1x10 - 5 , 1x10 - 6) M. The intensities of the absorption and fluorescence spectra were increasing with increase concentration which is agreement with Beer - Lambert Law. The effect of polarity solvents (Ethanol & Methanol) on molar extinction coefficient were studied. The measurement showed that effect of increasing polarity cause a decreasing intensity of the Absorption and Fluorescence spectrum and shifted to short wavelengths (Blue Shift).The Stokes shift was calculated for (DOTCI) where equal to (0.000041 nm - 1) for Ethanol and (0.000039 nm - 1) for Methanol.The quantum efficiency of (DOTCI) at (2x10 - 5 M) in Ethanol and Methanol were (qFM = 88% & 75%). While the radiative life time were (tFM = 29 ns & 79 ns) and the fluorescence life time were (tF = 25.52 ns & 59.25 ns) respectively. And for second concentration (1x10 - 5 M) were (qFM = 81% & 71%) , (tFM = 21 ns & 67 ns) and (tF = 17.01 ns & 47.57 ns).And for third concentration (1x10 - 6 M) were (qFM = 76% & 69%) (tFM = 14 ns & 60 ns) and (tF = 10.64 ns & 41.4 ns)The quantum efficiency results appear to be increase with increasing concentration and decrease with increasing polarity

استخدام انموذج Gray كدالة هدف في التصميم العكسي للعدسات المغناطيسية USING GARY'S MODEL AS A TARGET FUNCTION IN THE INVERSE DESIGN OF MAGNETIC LENSES

اسم المؤلف: هادي احمد حسين زنكنه
اسم المشرف: انعام سامي حمدي علي هادي حسن
الموضوع العام: علوم الفيزياء
السنة: 2005
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم اجراء دراسة حاسوبية لدراسة تاثير متغيرات الامثلية لانموذج Gray على الخواص البصرية الشيئية والمسقطية، وعلى شكل توزيعات المجال المغناطيسي والاقطاب المراد بنائها . ومن الجدير بالذكر ان دالة الهدف المستخدمة في هذا البحث ، وهي انموذج Gray، تتضمن متغيرات امثلية تمثل المعاملات الهندسية لتصميم العدسة المغناطيسية ثنائية القطب المتناظرة . وهذه المعاملات هي قطر الفتحة المحورية وعرض الفجوة الهوائية، اضافة الى معامل فيزياوي هو تهيج العدسة. اوضحت النتائج ان هناك تطابق جيد بين قيم المعاملات الهندسية كبيانات ادخال وبين نظيراتها التي يمكن الحصول عليها من الاقطاب المغناطيسية التي تم اعادة بنائها. كذلك لوحظ بان الخواص البصرية الشيئية تتحسن وبشكل ملموس كلما قلت قيم معاملات التصميم الهندسية. في حين وجد بان الامر معاكس لحالة الخواص البصرية المسقطية. وقدر تعلق الامر باثارة العدسة لوحظ بان ليس هناك اي تاثير لتغيرها على الخواص البصرية وكذلك الاقطاب المغناطيسية التي تم اعادة بنائها. اوضحت نتائج المقارنة مع باحثين اخرين ان الاجراء المستخدم في هذا البحث يمتاز بدقة عالية وكفاءة جيدة. | A computational study has been carried out to investigate the influence of the optimization variables of Gray's model on the objective and projector optical properties, and on the shape of the magnetic field distribution and the reconstructed polepieces. It should be mentioned that the target function used in this work is Gray's model which includes optimization variables representing the geometrical parameters for designing the symmetrical double polepiece magnetic lens. These parameters are the axial bore diameter and the air gape width in the addition to a physical parameter which is the lens excitation. The results have shown that there is good agreement between the values of the geometrical parameters as input data and the corresponding ones that can be obtained from the reconstructed magnetic polepieces. It has been noticed that the objective optical properties improved considerably and the values of he geometrical design parameters has been reduced. This was found to be in contrast to the case of the projector optical properties. As far as the lens excitation is concerned, it was noticed that it's variation had no effect on the optical properties and the reconstructed magnetic polepiece. A comparison with the results of other researchers had shown that the present work approach is characterized by high accuracy and good efficiency

دراسة تحليلية للضوضاء التي تسببها الهندسة الكسورية Analytical study of the noise caused by Fractal Geometry

اسم المؤلف: نور باسل حسينين العباسي
اسم المشرف: كاظم جواد كاظم الشجيري
الموضوع العام: علوم الفيزياء
السنة: 2009
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The problem of storing and transmitting of digital images can be conceder as most important issue in computer application. Image compression by using fractal is one of the compression techniques that has many advantages like restoring good quality image with high compression ratio, but this technique could contain errors represented by noise, distortion and gray scale error, this thesis is studying the distortion and shifting in gray scale that cased by fractal geometry for restored images.In this work the method used is fixed size dividing (fixed block size) to encode images and deduce the fractal code for each block, this method implemented to collect codes for each block in the image to restore the original image later.In decoding and restoring process using fractal, the effect of repetition of fractal restoring is studied to know its effect on image quality.Also the effect of using various primary images (white, grey, black, random) considered in decoding process to give restored fractal image, though restored fractal images were studied for various quality factors to estimate the distortion or noise in an image as follows : *Study of whole image at once using PSNR.*study the homogeneous regions and value of distortion could happened using (σ, μ)* study the edge and non edge regions in the image and estimate the distortion using (σ, μ) for each region.From estimation results of fractal noise can notice the differences between original image and restored fractal image, also the histogram is approaches to Gaussian shape the width is decreasing with the increase repetitions for fractal restoring. Also it can be noticed that the larger distortion made by fractal is in the edges. And from homogeneous regions in the image ,the histogram for four cut regions there is increase in the base and less in height keeping the area under the curve unchanged

دراسة تاثير لزوجة المحاليل في مذيبات مختلفة على الخواص الطيفية لجزيئتي (2 مثيل نفثالين,2 - 3 ثنائي مثيل نفثالين) Studying the viscosity effect of solution in different solvent on the spectral properties for (2 - Methylnaphthalene, 2, 3 - Dimethylnaphthalene Molecules

اسم المؤلف: نسمه عدنان جبر
اسم المشرف: عبد الله احمد رشيد وليد صلاح عبد الوهاب
الموضوع العام: علوم الفيزياء
السنة: 2011
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم دراسة وقياس اطياف الفلورة والامتصاص لمحلول (2 - مثيل نفثالين) المذاب في المذيبات (الهكسان, الايثانول , البرافين) كدالة للتركيز المولاري وبطول موجي مهيج (λex=270nm) ولقد تم حساب الكفاءة الكمية ( (qFM, زمن الفلورة الاشعاعي ( ( τFM ومعدل العمليات الاشعاعية (KFM) واللا اشعاعية(KIM) حيث وجد ان الكفاءة الكمية لمحلول (2 - مثيل نفثالين) في الهكسان والايثانول عند التركيز [10 - 4M] تكون مساوية الى qFM=0.20)) و( qFM =0.15) على التوالي. اما عند حساب الكفاءة الكمية لمحلول (2 - مثيل نفثالين) في البرافين فانها تساوي ( qFM =0.24) ان هذا الاختلاف في قيم الكفاءة الكمية يكون بسبب اختلاف قطبية المذيب ولزوجته. كما وجد ان زيادة التركيز المولاري يؤدي الى نقصان شدة طيف الفلورة وبالتالي نقصان الكفاءة الكمية وثابت العمليات الاشعاعية وذلك بسبب ظاهرة الامتصاص الذاتي. لقد تم حساب الكفاءة الكمية نسبة الى مركب النفثالين بكفاءة مقدارها qFM =0.14) ) كمركب قياسي عند نفس الطول الموجي المهيج. ان جميع القياسات تمت بدرجة حرارة الغرفة. ان مركب (2 - مثيل نفثالين) يظهر فلورة الاكسايمير في المحاليل المركزة وعند درجة حرارة الغرفة . فعند اذابة (2 - مثيل نفثالين) في (الهكسان, الايثانول والبرافين) عند التراكيز العالية [0.5,1,1.5,2, 2.5,3] مولاري نلاحظ انخفاض شدة الفلورة النسبية للجزيئة المونمر مع ظهور حزم واضحة وغير متحللة عند الاطوال الموجية الطويلة400 nm) ) تزداد مع زيادة التركيز,تمثل هذه الحزم طيف فلورة الاكسايمر. لقد تم دراسة طيف فلورة الاكسايمر في محاليل تحتوي على الاوكسجين ومحاليل خالية من الاوكسجين حيث نلاحظ زيادة شدة الطيف عند سحب الاوكسجين الذائب في المحاليل. لقد تم حساب الناتج الكمي للجزيئة المونمر والاكسايمر (ΦFD, ΦFM) من تكامل المساحة تحت طيف الفلورة المصحح من ظاهرة الامتصاص الذاتي وايضا تم حساب تركيز النصف [M]h حيث وجد مساوي الى 1.5, 1.1mol)=[M]h ) لمحلول (2 - مثيل نفثالين) في الهكسان بالاوكسجين وبدون الاوكسجين على التوالي. اما بالنسبة لمحاليل (2MN) في الايثانول والبرافين فان [M]h= 1.25, 1.7 mol)) و[M]h= 2, 1.25 mol)) بالاوكسجين وبدون الاوكسجين على التوالي. لقد تم حساب معاملات جزيئية اخرى مثل ناتج فلورة الاكسايمر/المونمر المولاري (K) , معامل Stern - Volmer)) والكفاءة الاكسايمر الكمية (qFD) حيث وجد انها تساوي (qFD=0.18 ,0.26) لمحاليل (2 - مثيل نفثالين) في الهكسان بالاوكسجين وبدون اوكسجين وتساوي ( (qFD=0.13, 0.21 لمحاليل (2 - مثيل نفثالين) في الايثانول بالاوكسجين وبدون اوكسجين اما لمحاليل (2 - مثيل نفثالين) في البرافين فان الكفاءة الكمية تساوي(, 0.35 22 (qFD=0. حيث نلاحظ ان قيم الكفاءة الكمية تزداد مع زيادة لزوجة المذيب اما احتمالية تكوين الاكسايمرKDM[M] فانها تتناسب عكسيا مع لزوجة المذيب. كما تم دراسة طيف الفلورة لمركب (3,2 - ثنائي مثيل نفثالين) المذاب في الهكسان عند التراكيز ] M 2 - 10×5, 2 - 10 , 3 - 10, 4 - 10 [بطول موجي مهيج (λex= 270nm) عند درجة حرارة الغرفة. حيث وجد ان قيمة الناتج الكمي تقل بزيادة التركيز المولاري بسبب ظاهرة الامتصاص الذاتي, ان قيمة الكفاءة الكمية لمركب ( - 3, 2 ثنائي مثيل نفثالين ) تساوي qFM = 0.26)) عند التركيز [10 - 4] مولاري وان هذه القيمة تكون كبيرة مقارنة مع قيمة الكفاءة الكمية لمركب (2 - مثيل نفثالين) بسبب مجموعتي المثيل المعوضتين. | The absorption and fluorescence spectra for 2 - Methylnaphthalene (2MN) solution which dissolved in hexane, ethanol, paraffin as a function of concentration at excitation wavelength (λex= 270nm) was measured and studied. The quantum efficiency (qFM), the radiative fluorescence lifetime (τFM), rate parameter of radiative (KFM) and non - radiative (KIM) processes were calculated. Where the quantum efficiency is equal to (qFM =0.20), (qFM =0.15) for 2 - methylnaphthalene solution dissolved in hexane and ethanol at concentration [10 - 4M], respectively. But the quantum efficiency of 2 - methylnaphthalene in paraffin is equal to (qFM =0.24) at same concentration. This difference in the value of quantum efficiency refers to difference in polar solvent and viscosity. It is found that the increase in molar concentration led to decrease the intensity of spectrum, quantum efficiency, rate parameter of radiative process (KFM) because of the effect of (self - absorption) phenomena. In addition, the quantum efficiency measurement was calculated relatively to standard compound of naphthalene with quantum efficiency (qFM = 0.14) at same excitation wavelength. All measurement was at room temperature. (2MN) exhibits excimer fluorescence in concentrated solutions at room temperature. When (2MN) dissolved in hexane, ethanol, paraffin at concentrations [0.5, 1, 1.5, 2, 2.5, 3 M], the relative intensity of monomer fluorescence bands are decreased and emergence a broad, structureless bands at longer wavelength (400 nm) which is increase with increasing molar concentration, these bands refer to the excimer fluorescence. We study an excimer fluorescence spectrum in oxygenated and deoxygenated solution. When dissolved oxygen expelled, the intensity of fluorescence was increased. The quantum yield of monomer (ΦFM) and excimer (ΦFD) fluorescence calculated from the area under monomer and excimer fluorescence spectra, which corrected from self - absorption effect. The (half - value) concentration [M]h was measured which is equal to ([M]h=1.5, 1.1 mol) for oxygenated, deoxygenated solutions of (2MN) in hexane. While the solution of (2MN) in ethanol and paraffin, the half - value concentration equal to ([M]h= 1.7, 1.25) and ([M]h= 2, 1.5), respectively. This difference is because of solvent viscosity. Other molecular parameter were measured, like the molar excimer/monomer fluorescence yield (K), Stern - Volmer coefficient (KSV), excimer quantum efficiency qFD which is equal to (qFD=0.18, 0.26) for oxygenated and deoxygenated solutions of (2MN) in hexane. So the excimer quantum efficiency equal to (qFD =0.13, 0.21), (qFD =0.22, 0.35) for (2MN) oxygenated and deoxygenated solutions of (2MN) in ethanol and paraffin, respectively. The rate parameter of excimer formation KDM [M] is inversely proportional to viscosity. The spectral properties of (2, 3 - Dimethylnaphthalene) dissolved in hexane was studied at concentration [10 - 4, 10 - 3, 10 - 2, 5×10 - 2M] at exciting wavelength (λex= 270nm), at room - temperature. The quantum yield decreased with increase of molar concentration because of self - absorption effect. The quantum efficiency of (2, 3 - DMN) in hexane at concentration [10 - 4] M is equal to (qFM =0.26) which is high compared with quantum efficiency of (2MN) in hexane because of two methyl groups substitutes

تصنيع ودراسة خواص كاشف ضوئي لمادة الجرمانيوم المحضر بتقنية التبخير الحراري الفراغي Fabrication and Studying Photodetector Propertise for Garmainum Material prepared by Technical thermal evaporation Vacancy

اسم المؤلف: ندى ضمد ماذي
اسم المشرف: زياد طارق الدهان عبد الكريم حسين داغر
الموضوع العام: علوم الفيزياء
السنة: 2011
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم تصنيع كواشف من الجرمانيوم (Ge ) بواسطة عملية التطعيم الجرمانيوم من نوع (n - type) بعد طلاءه بمادة النحاس بطريقة التبخيرالحراري في الفراغ وذلك بقصف سطح الجرمانيوم بنبضات من ليزر(Nd - YAG) بطاقات مختلفة وهي mJ ( (40 , 60 , 80 وتم دراسة اثر التطعيم في الخصائص التركيبية والبصرية لسطوح العينات والخصائص العامة للكواشف . اظهرت نتائج فحوصات الاشعة السينية ان الجرمانيوم قبل وبعد التطعيم تركيبة البلوري ذا تركيب احادي التبلوروان اعلى مستوى هو بالاتجاة (111)وقد ادى التطعيم الى ان تقل شدة القمة عند المستوى (111), كما ان عرض المنحني لمنتصف القمة قد ازداد عن قيمته قبل التشويب . وقد تمت دراسة الخصائص البصرية للنماذج من خلال قياس طيفي النفاذية والامتصاصية ولمدى الاطوال الموجية mμ 2.5 - 22.5)) وقد وجد ان الامتصاصية تقل كلمزاادت طاقة القصف لسطح وتزداد فجوة الطاقة البصرية للانتقال المباشرة المسموحة eV 0.6 - 0.65)) وكذلك فجوة الطاقة البصرية للانتقال المباشر الممنوع eV (0.55 - 0.58 ) وبزيادة طاقة القصف بالليزر . والخصائص العامة للكواشف Ge : Cu)) وقد تم ايجاد الاستجابية الطيفية التي تحددالمنطقة الطيفية التي يعمل بها الكاشف وقد تبين انها تعمل ضمن مدى الطيفيللمنطقة تحت الحمراء (IR) وقد وجد افضل استجابية طيفية تم الحصول عليها هي ( 0.36 A/W) للشريحة التي قصفت بطاقة قدرها(80mJ ) عند الطول الموجي (808nm) . وكذلك حساب الكفاءة الكمية للكواشف وكانت اعلى كفاءة تم الحصول عليها (56%) وللشريحة نفسها ايضا كما تم حساب القدرة المكافئة للضوضاء والكشفية والكشفية النوعية وكانت اعلى كشفية كانت (1.610 - 10 W - 1 ) . | Fabrication of Ge detector of n - type by doping Ge with Copper Material in Vacumm evaporation method .Where the surface of Ge is projected by Nd - YAG Laser pulses of different energies (40,60,80 mJ) Studying the effect of doping on the Structur and Optical Propurties models Surface , Genral Properties of the detectors. Result of checking x - ray appear the Ge before and after crystal structure have single crystal structure and higher level in the direction (111) doping cause reduce to intensity at (111) , full width of halfe maximum is increased after doping . Optical properties of models have been studied throughmeasuring transmittance and absorpance spectroscope with range (2.5 - 22.5) μm , we find that the absorpance is reduced with any increase in projected energy to the surface . opticalenergy gab of direct transferences is increased (0.6 - 0.65) eV also forbidden optical energy gab for direct transferences(0.55 - 0.58) eV with Laser projected energy . Genral properties of the detectors Ge : Cu we are finding the Spectral responsivity which determine the spectral area in which detector this detectors are doing within the spectral range near IR rengion the optimums responsivity is (0.36) A/W for sample which is projected by Laser energy of (80) mJ at wavelength 808 nm . Also the quantum efficiency was calculated where the high efficiency is (56%) for the same sample , Also calculated the minimum equevilent power for noise and detection and the specific detection The high detection is(1.610 - 10 ) W - 1 .

دراسة تاثير اضافة المركب ZnFe2O4 على الصفات الكهربائية للمجموعة ZnxNi1 - x - yCuyFe2O4 Studying the Effect of Adding Synthesis ZnFe2O4 on the Electric Properties of ZnxNi1 - x - yCuyFe2O4

اسم المؤلف: ناهض حسون علوش
اسم المشرف: خالد طه مهدي ياسين نجم عبيد
الموضوع العام: علوم الفيزياء
السنة: 2005
الموضوع الدقيق: الفيزياء التطبيقية
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: جرى في هذا البحث تحضير ثلاثة انواع من المركبات الفرايتية، التي هي (Ni - Ferrite) و(Zn - Ferrite) و(Cu - Ferrite) باستخدام الطريقة السيراميكة التقليدية؛ وذلك بخلط (1) مول من اكاسيد العناصر (Ni, Cu, Zn) مع مولين من اوكزالات الحديد. اعتمدت تقنية حيود الاشعة السينية للتحقق من تكون مركبات السبنل فرايت المطلوبة لتحضير المركب النهائي (ZnxNi1 - x - yCuyFe2O4)، وذلك بخلطها وفق النسب (x = 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7) و(y = 0.2)، [اذ ان x هي النسب الوزنية المضافة من الزنك الفرايت على حساب النيكل فرايت وان y هي النسبة الوزنية المضافة لـ (CuFe2O4)] والتي شكلت منها سبعة نماذج كل نسبة تمثل انموذج، وذلك بكبسها على شكل اقراص بقطر (13 mm) وسمك بحدود (6.5 mm)، وقد تم تلبيدها بدرجات حرارة (1200 C، 1250 C،1300 C) ولمدة ساعتين. وتجرى بعد كل عملية تلبيد القياسات عليها جميعا، فقد تم قياس الوزن والحجم لكل انموذج؛ لغرض حساب الكثافة الظاهرية، والخصائص الكهربائية للنماذج والتي تتضمن فحوصات التيار المستمر (D.C) تمثل بقياس المقاومية الكهربائية في درجة حرارة الغرفة. وفحوصات التيار المتناوب (A.C)، والمتضمن فحوصات ثابت العزل () والتوصيلية الكهربائية (A.C) وظل زاوية الفقد (tan).وقد اظهرت النتائج للنماذج المحضرة للمركب (ZnxNi1 - x - yCuyFe2O4) ان الكثافة الظاهرية تزداد بازدياد درجة حرارة التلبيد الى ان تصل اعلى قيمة لها في درجة حرارة التلبيد (1300 C)، وكذلك فان الكثافة تزداد بزيادة نسبة (Zn) اي قيم (x) حتى تصل اعلى قيمة لها في (x = 0.7)، فقد بلغت قيمة الكثافة الظاهرية عندها (d = 4.905 g/cm3). وفي درجة حرارة تلبيد (1300 C). كما اظهرت الفحوصات الكهربائية باستخدام التيار المستمر ان المقاومية الكهربائية تقل مع زيادة درجة حرارة التلبيد، وكذلك بزيادة قيمة x حتى تصل اقل قيمة لها عند (x = 0.4)، بعدها تزداد مع زيادة قيمة (x). وان اعلى قيمة لها في (x = 0.1) عند درجة حرارة تلبيد (1200 C). بينما اظهرت الفحوصات الكهربائية للتيار المتناوب ان قيم ثابت العزل ستقل بشكل حاد جدا مع زيادة التردد المستخدم دون (104Hz)، وبعدها يكون الانخفاض في ثابت العزل تدريجيا للنماذج جميعا، وفي درجات حرارة التلبيد، فقد تمت القياسات في درجة حرارة الغرفة، وان اعلى قيمة لثابت العزل في (x = 0.5) وعند درجة حرارة تلبيد (1300 C) عند استخدام ترددات اقل من (1 KHz). وكذلك فان زيادة نسبة الزنك اي قيم (x) تؤثر في زيادة ونقصان قيم ثابت العزل.وقد اظهرت الفحوصات الكهربائية للتوصيلية المتناوبة (A.C) ان قيمها تزداد بزيادة التردد المستخدم للنماذج جميعا وفي جميع درجات حرارة التلبيد جميعا، حيث تمت الفحوصات في درجة حرارة الغرفة. وكذلك فان زيادة نسبة (Zn) (قيم x) ايضا في زيادة وانخفاض قيم التوصيلية المتناوبة.اما فيما يخص ظل زاوية الفقد (tan)، فقد اتضح من قياساتها بان زيادة التردد تقود الى نقصان في قيم ظل زاوية الفقد حتى الترددات اقل من (10 KHz)، بعدها يزداد مع زيادة التردد لجميع النماذج ولجميع درجات حرارة التلبيد، وبزيادة نسبة (Zn) سيزداد ظل زاوية الفقد وينخفض تبعا لتغير نسبة (Zn). | Three types of ferrite are prepared in this work, these are Zn ferrite, Ni ferrite and Cu ferrite using conventional solid state reaction by mixing one mole of divalent oxide elements each with two mole of ferrous oxalate by X - Ray diffractometer studies of the samples confirmed the spinel formation.By using the three types which prepared (ZnFe2O4), (NiFe2O4), (CuFe2O4) the composition was prepared (ZnxNi1 - x - yCuyFe2O4) at values of (x = 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7) and y = 0.2 to be seven pressed pellets (13 mm diameter, 5 - 6 thickness) are sintered at temperature (1200 C, 1250 C, 1300 C) for (2 hr). After sintering, weight and dimension of the pellets are measured to determine bulk densities. The electrical characteristics for these samples, included the measure of D.C current as electrical resistivity () and A.C current as the measure of dielectric constant (), conductivity (A.C) and dissipation factor (tan).The practical results of these samples of syntheses (ZnxNi1 - x - yCuyFe2O4) show that the increasing of density with increasing sintering temperature up to (1300 C), also these densities will be increasing with increasing of x - value till to (x = 0.7) it been maximum value of density (d = 4.914) at (1300 C) sintering temperature the D.C electrical testing showed that electrical resistivity decreasing with increasing of sintering temperature also it decreasing with increasing of x - value till to it reach (x = 0.4) then it will increasing with x - value increasing the maximum value of resistivity at (x = 0.1) at sintering temperature (1200 C).While the A.C electrical testing showed high decreasing in dielectric constant with increasing retraction at room temperature till to (104 KHz) frequency, then will be gradually decreasing for samples and wall sintering temperatures. The maximum value of dielectric constant at (x = 0.5), (1300 C) sintering temperature at retraction less than (1 KHz). The increasing of x - value was affected by increasing and decreasing of dielectric constant.The testing of A.C conductivity (A.C) showed increasing of conductivity with increasing of frequency for all samples and sintering temperature, the increasing of x - value leads to increasing and decreasing of A.C conductivity.The testing of dissipation factor (tan) showed the increasing of reiteration leads to decrease the value dissipation factor till to it reach less than 10 KHz and it will be increasing by increasing of frequency for all samples at all sintering temperature, and when the x - value was increasing the value of dissipation factor was increasing and decreasing.

تاثير الحركة الخطية والاهتزازية على كفاءة الصورة بوجود الزيوغ THE EFFECT OF VIBRATION AND LINEAR MOTION ON THE IMAGE EFFICIENCY IN THE PRESENCE OF ABERRATION

اسم المؤلف: مهند عادل مصطفى الصياح
اسم المشرف: قصي خالد احمد جمال عبد الجبار حسن
الموضوع العام: علوم الفيزياء
السنة: 2003
الموضوع الدقيق: معالجة الصور
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ان الهدف الذي اجريت له هذه الدراسة هو معرفة اسلوب توزيع الشدة في صورة جسم متاثر بحركة خطية او بحركة اهتزازية في حالة استعمال الاضاءة المتشاكه عبر فتحة دائرية، وذلك عن طريق استخدام معادلتين منفصلتين لتوزيع الشدة في الصورة متضمنة لهاتين الحركتين ومتمثلتين بقيم مختلفة لعاملي الحركة الخطية والحركة الاهتزازية. وتعتبر هاتين المعادلتين مهمة في الدراسة النظرية والعملية لاي نوع وكمية زيغ موجودة في النظام البصري.تم اولا ايجاد الشدة في نظام بصري يحتوي على خطا بؤري وعلى زيغ كروي من المرتبة الثالثة والخامسة ومرتبته العليا وكذلك على زيغ مذنبي بكميات مختلفة، وادخلت بعدها قيم عاملي الحركة الخطية والحركة الاهتزازية كل على حدة لمعرفة مدى تاثير ذلك على توزيع الشدة في الصورة ومن ثم تم تحديد قيمة عامل الحركة المؤثر على تلك الشدة والتي من الممكن ان تكون عندها الشدة مقبولة حسب معيار ستريل.كذلك تم ايجاد الشدة في الحالة المثلى للزيغ الكروي من المرتبة الثالثة والخامسة بوجود الخطا البؤري وتم حساب مدى تاثير الحركة الخطية او الاهتزازية على نظام بصري بهذه المواصفات. | The aim of this study is to know the way of intensity distribution in a body image effected by a linear and vibration motions in case of using the coherent illumination through a circular aperture by using two separated equations for intensity distribution in the image including the two effected motions that are represented by two different values for the linear and vibration motions factors. Those two equations are considered important in the theoretical and practical studies for any kind and amount of aberration in the optical system. First of all the intensity of an optical system has been found, this system contains a focal error and a 3rd, 5th and highest order of spherical aberration. Also it contains a coma aberration, all in different values after that the values of the linear and vibration motions factors were inserted separately to know the effect on the intensity distribution in the image, the factor of the affected motion on this intensity has been specified that at this value the intensity could be accepted according to strehl criterion. Also the ideal intensity for the spherical aberration for the 3rd, 5th and the highest order has been calculated in presence of focal error, also the affection of the linear or vibration motion on the optical system with these specifications was calculated

دراسة الخصائص التحسسية لاغشية اوكسيد الخارصين والمحضرة بطريقة (ZnO : Al) المشوبة بالالمنيوم التبخير الحراري Study of the Sensing Properties of the Aluminum - Doped Zinc Oxide thin films Prepared by Thermal Vacuum Evaporation Technique

اسم المؤلف: مهند شاكر كشكول محمود ال شربه
اسم المشرف: ابراهيم رمضان عاكول
الموضوع العام: علوم الفيزياء
السنة: 2009
الموضوع الدقيق: الاغشية الرقيقة
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الكلمات الدلالية:
  • الخصائص التحسسية
  • اغشية اوكسيد الخارصين (ZnO : Al) المشوبة بالالمنيوم
  • متحسس كيميائي
الصفحات الاولى:
المستخلص: تم في هذا البحث دراسة الخصائص الكهربائية والتحسسية لاغشية (ZnO : Al) الرقيقة وبالنسب%(5,4,3,2,1) المحضرة بطريقة التبخير الحراري في الفراغ على قواعد زجاجية بدرجة حرارة الغرفة وبسمك (275±15)nm وبمعدل ترسيب (1.7±0.3nm/s) ومن ثم عانت جميع الاغشية اكسدة حرارية جافة بدرجةoC350 ولمدة ثلاث دقائق.تبين من خلال نتائج حيود الاشعة السينية (XRD) ان جميع اغشية(ZnO : Al) كانت ذات تركيب متعددة التبلورمع اتجاه تفضيلي هو(101) اكثر وضوحا من باقي الاتجاهات وذات تركيب سداسي (فورتزايت). ومعدل الحجم الحبيبي لاوكسيد الخارصين ZnO النقي (44.9nm)، التشويب بالالمنيوم ادى الى نقصان الحجم الحبيبي، اي تدهور التركيب البلوري ، يصل الحجم الحبيبي الى ادنى قيمة عند 3% ثم يقل تاثير التشويب بعدها,كما بين مخطط الحيود (XRD) لاغشية ZnO : Al وجود طورين للالومينا (Al2O3) هما α وδ تزداد نسبة تواجدهما مع زيادة نسبة التشويب. اظهرت القياسات الكهربائية ان التوصيلية الكهربائية المستمرة تزداد بزيادة نسبة التشويب حتى لتصل اقصى قيمة(Ω cm) - 1 144.875عند نسبة 3% ثم تبدا بالنقصان مع زيادة نسبة التشويب .وبينت القياسات ان الاغشية كافة تمتلك طاقتين للتنشيط (Ea1) و(Ea2) تزداد قيمتهما بزيادة نسبة التشويب، وتبين من خلال دراسة تاثير هول وتاثير سيباك ان جميع الاغشية هي من النوع السالب (n - type) .اما التحركية وكثافة الحاملات لاغشية (ZnO : Al) فقد ازدادتا مع ازدياد نسبة التشويب لتصل اقصى قيمة 59.39 cm2 V - 1s - 1 وcm - 3 1019×1.52 على التوالي عند نسبة تطعيم 3% بعدها بداتا تقل مع زيادة نسبة التشويب . تم تعريض العينات الى بخار الايثانول والميثانول وبدرجات تطبيقية مختلفة(30,40,و65 ) Co وبتسليط فولتية تتراوح (0 - 15) فولت, اظهرت القياسات التحسسية تحسس عالي لبخار الايثانول والميثانول عند تركيز 750ppm للبخار وكانت نسبة التشويب 3% هي الافضل دائما حيث سجلت اعلى قيمة للتحسس بلغت 73% عند درجة حرارة تطبيقية Co 30 تزداد لتصل 85% عند Top= 40 Co , في حين لم تظهر الاغشية تحسس لغاز(Co2 ) الا عند درجة حرارة (Co 205 ) وبتركيز ppm 1500 للغاز وبشكل ضعيف جدا بلغت نسبة التحسس 8% عند نسبة تشويب 3%, وكان التحسس معدوم بالنسبة لغاز (N2 ) وتبين ان التحسسية تتناسب عكسيا مع الحجم الحبيبي ,وطرديا مع درجة الحرارة التطبيقية ولمدى معين كما ان سرعة الاستجابة ومنحني (العودة ) يتحسن بشكل ضئيل مع زيادة درجة الحرارة. واظهرت النتائج عند تسليط فولتية خارجية خلال اخذ القياسات التحسسيةعلى الغشاء يزيد من تيار الخارج لكن في نفس الوقت تقل التحسسية . | In this work, electrical and sensing properties are investigated for Aluminum - doped Zinc Oxide thin films with different aluminum doping concentration (1,2,3,4 and 5%) prepared by thermal vacuum evaporation on glass substrate at (R.T) with (275±15)nm thickness deposition rate (1.7±0.3 nm/s) ,all films undergo dry thermal oxidation at (350 оC )for three minutes .The X - ray diffraction technique showed that all prepared films are polycrystalline with preferential orientation in the (101) direction. The peaks correspond to a hexagonal wurzite structure with the average grain size of pure ZnO (44.9nm) ,the doping resulted in decreasing grain size i.e deteriorates the crystallinity of the films until 3%doped.Other phases indicated from XRD were (δ) Al2O3.and(α) Al2O3 . Alumina concentration increased with increasing doping concentration. The grain size of ZnO : Al films is smaller compared to the grain size of ZnO films at same deposition parameters .The electrical properties showed the conductivity variation of Al - doped ZnO films with different doping concentrations first increase with increased Al concentrations. Maximum conductivity 144.875 (Ωcm) - 1 was obtained at a doping concentration of 3%, then the conductivity started to decrease significantly with increased in the Al doping concentration . Also, the doping affected the activation energy, by increasing it is value with increasing in doping concentration.The results obtained from Hall effect and Seebeck measurements have shown that ZnO : Al film is ( n - type ).The mobility of the ZnO : AI films increases with dopant concentration, and reaches maximum value of about 59.39 Cm2 V - 1 S - 1, at doping concentration 3%. Above 3% the mobility of the film decreases with increasing AI - concentration. The carrier concentration of the film increases with increasing dopant concentration, such behavior was expected, after a certain level of doping at 3%.The carrier concentration of the film decreases with increasing dopant concentration. Thin films specimens were examined for chemical sensing using vapor ethanol and methanol (at 30,40and65 оC) .The thin film surface exposed to 750 ppm vapor concentrations. The measuring, carried out with an applied voltage varied from (0 - 15) volts .The sensing measurements showed high sensitivity to ethanol and methanol. AZO 3% recorded the best result 73% for ethanol at operation temperature 30 оC increased to 85% at 40 оC.The sensitivity to CO2 was observed hardly of about 8% at 205 оC, and did not record any detection to N2 gas.The result showed that the sensitivity directly proportional with the operation temperature for limited range, and little improves response time and recover curve.Sensitivity is inversely proportional to the grain size and the applied voltage.

تحليل التزامن لمنظومة اتصالات ضوئية تستخدم ليزر دايود معرض لتغذية ضوئية رجعية مزدوجة Analysis of synchronization for an optical communication system using a laser diode subjected to double optical feedback

اسم المؤلف: منتظر جواد خضير الطائي
اسم المشرف: فراس صبيح محمد
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الالياف الضوئية
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ان ليزر اشباه الموصلات الخاضع للتغذية الضوئية الرجعية يمكن ان يولد اشارة فوضوية ذات ابعاد كبيرة تستخدم بتطبيقات الانتقال الامن للمعلومات في الاتصالات الضوئية. التغذية الضوئية الرجعية ممكن ان تسبب تغيرات كبيرة في خصائص الليزر، مثل تيار العتبة، والكفاءة التفاضلية، خرج الطاقة وخط الطيف.اضطراب ليزر اشباه الموصلات يوفر تقنية مفيدة جدا ، ما يسمى الاتصالات الفوضوية. والفكرة هي ببساطة تحميل (ترميز) الرسالة المرسلة على الموجة الفوضوية واستخراجها حين وصولها الى (المستلم) اذا حصل التزامن بينه وبين (المرسل). في رسالة الماجستير هذه ، نقوم بدراسة السلوك الديناميكي غير الخطي في ليزر اشباه الموصلات ذي التكوين (المسيطر - التابع) في منظومات الاتصالات الامنة. سيتم تحقيق الهدف من هذا البحث عن طريق دراسة نوعية تزامن منظومات ليزر اشباه الموصلات ذات الحلقة - المفتوحة والحلقة - المغلقة, من خلال تقييم تاثير المعاملات المؤثرة على هذه المنظومات, مثل زمن التغذية الضوئية الرجعية , زمن الحقن الضوئي, وقوتي التغذية الضوئية الرجعية والحقن الضوئي.تم دراسة تاثير قوة التغذية الضوئية الرجعية المزدوجة والحقن الضوئي في منظومة الحلقة المفتوحة. وقد اظهرت النتائج عدم الترابط او الترابط الجزئي بين الليزران لاغلب القيم, كما تصبح خريطة التزامن بشكل سحابة نقطية (عدم وجود ارتباط بين خرجي اليزر المسيطروالتابع) او خط تزامن متقطع. لكن يمكن ان مشاهدة نوعية التزامن الممتازة بشكل واضح عندما تكون قيم العوامل المؤثرة ( kf = 0.14 وkinj =0.28) وتثبيت قيم τf ) وτ ) عند (1ns) . في حين ان تاثير تغير قيم τf ) وτ ) في منظومة الحلقة - المفتوحة اظهر ان ا افضل نتيجة حصلنا عليها كانت عند (kf = 0.14 , ( kinj =0.28 و) τf ,τ =1.6 ns (. حيث ظهر خط تزامن مستمر تقريبا مع غيمة من نقاط قليلة متفرقة ووجود اختلاف قليل في كثافة الحاملات لليزر المرسل والمستلم. النتائج الحسابية اظهرت ان المنظومة الضوئية يمكن ان تكون اكثر استقرارا من خلال استخدام الليزر المستلم مع نظام التغذية الضوئية الرجعية ذي الحلقة - المغلقة من خلال ظهور خطوط تزامن مستمرة وتطابق كثافة الحاملات لليزر المرسل والمستلم . وهذا يدل على امكانية تحسين نوعية التزامن باستخدام التغذية الضوئية الرجعية مع كلا الليزران المرسل والمستلم. من ناحية المنظور التطبيقي للاتصالات الفوضوية المشفرة تعد النتائج التي حصلنا عليها مهمة لتحديد ظروف التشغيل الافضل وتقييم محددات اداء منظومات التغذية الضوئية الرجعية التي تعتمد على ترابط التزامن بين الليزران. | In semiconductor lasers, chaos has offered a very useful technology, the so - called chaotic communication. The idea is simply to carry (encode) the transmitted message on a chaotic waveform and decode it on the receiver if the latter is synchronized to the transmitter .The aim of this work is to be achieved by numerical study of the synchronization quality of open - loop and close - loop Semiconductor Laser systems through assessing the effect of the variable parameters that affect these systems. Such as, optical feedback time( τ ), optical injection time (τf) optical feedback strength( kf ) and optical injection strength (king) The effect of optical injection and double optical feedback strength in open - loop system are studied. The results show the two lasers are decoupled or partially coupled for the most values as the synchronization map becomes a cloud of points (no correlation between master laser ( ML) and slave laser (SL) outputs) or discrete diagonal line. But, It can be clearly seen excellent synchronization quality when (kf = 0.14and kinj =0.28) while keeping (τ and τf ) fixed at (1ns). While under the the effect of varing τ and τf in open - loop scheme. The best result was when kf = 0.14, kinj = 0.28,  =2 ns and f = 2 ns that shows semi - continuous diagonal line accompany with a few cloud of points and short mismatch in the carriers density correlation for the transmitter and receiver. The numerical results have founds that the system can be more stabilized by utilized a feedback loop at the slave diode in close - loop system. It is evident that the synchronization quality improves by using feedback loop on both lasers. From the perspective of applications in chaos communications and cryptography, our results will be helpful to determine optimal operating conditions and estimate performance limitations of optical feedback schemes based on synchronization of coupled lasers

دراسة خصائص الحزمة الالكترونية على صور التاثير المراتي Investigation of the Electron Beam characteristics on the Mirror Effect Images

اسم المؤلف: مصطفى محيسن عبد
اسم المشرف: حسن نوري عبد الوهاب العبيدي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: فيزياء الالكترونيات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: اجريت دراسة نظرية بمساعدة الحاسوب لوصف سلوك الكترون معجل نحو عينة عازلة مشحونة لانتاج صور المراة الالكترونية. حيث تم تقديم معالجة رياضية بسيطة لسلوك الالكترون الماسح بدلالة جهد الحزمة وجهد النموذج. ان معادلة الحركة للالكترون الساقط راسيا اشتقت بدلالة قانون حفظ الطاقة. تكمن اهمية الاشتقاق الرياضي في كونه يربط معلمات حزمة المسح من جانب بمعلمات التشعيع من اخر. تم الوصول الى هذا المنجز من خلال تبني انموذجي الشحنة النقطية والقرص المشحون. اظهرت النتائج بان فهم وتفسير جيد لسلوك الالكترون الماسح الفيزيائي يمكن استخلاصه. بناء على ذلك فان تاثير قطر وتيار الحزمة جهد المسح مسافة التشغيل، الشحنة المتراكمة وابعاد المنطقة المشععة على صور مراة الالكترون بالامكان تحديدها. النتائج اظهرت بوضوح ان تيار الحزمة الالكترونية له تاثير كبير على الصور المر اتية المنتجة بالمقارنة مع معلمات الحزمة الاخرى. وتبين ان تيار الحزمة يمكن ان يستخدم بالتحكم بصور المراة فقط عند القيم الدنيا من جهد المسح. علاوة على ذلك اظهرت المعالجة المستخدمة في هذا العمل القدرة على انتاج وسيلة لحساب الشحنة المتراكمة. وبينت نتائج هذه الطريقة اتفاق ممتاز مع بعض النتائج التي تم نشرها. | A computer - aided theoretical investigation is conducted to describe the behavior of an accelerated probing electron oriented toward a charged insulator sample and hence producing electron mirror images. A simple mathematical manipulation for the scanning electron behavior in terms of the beam and surface potentials is presented. The equation of motion of this head - incident electron is derived in terms of the energy conservation law. The importance of the derived expression is that it has relating scanning beam parameters, on the one hand, and the parameters of the irradiation on the other hand. This obligation has achieved through adopting of the disc and point charged models. Results have shown that best comprehend and interpret for the physical behaviors of a scanning electron can be extracted. Hence the influence of a beam (size and current), scanning potential, working distance, trapped charge and dimension of the irradiated area on the electron mirror images are defined. The results have clearly shown that the electron beam current has a considerable effect on the deduced mirror images in comparison with the other beam parameters. It is found that the beam current may be used to control mirror images only in the lower values of scanning potential. Furthermore, the introduced manipulation shows an ability to produce a method for calculating the trapped charge. However, the result of this method shows an excellent agreement with some of the published experimental one

تاثيرات اشعة الليزر العلاجي واطئ القدرة على الخلايا الطبيعية والسرطانية من خلال تشعيع الغدة اللمفاوية للفئران

اسم المؤلف: مصطفى صالح علي الموسوي
اسم المشرف: تقي علي موسى الموسوي الواجدي ناهي يوسف ياسين
الموضوع العام: علوم الفيزياء
السنة: 2010
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ان تقنية التشعيع باستخدام الليزر واطئ القدرة Diode Laser ذي الاطوال الموجية المختلفة له القابلية على احداث تغييرات بايولوجية وذلك من خلال انتقال طاقة الفوتون الى النظام البايولوجي المستهدف، وبسبب الاهتمام بموضوع تاثيرات اشعة الليزر المستخدمة في العلاج الطبي فان تاثير ضوء الليزر ذي القدرة الواطئة على نشاط الخلايا المناعية تمت دراسته على الخلايا المناعية المميزة (macrophages and T cells) في نماذج حيوانية. وان جميع التجارب المتعلقة بالبحث قد انجزت في المركز العراقي لبحوث السرطان والوراثة الطبية التابع للجامعة المستنصرية.تم فحص 180 نموذج من اناث الفئران البيضاء بعمر شهرين وذات معدل وزن 25± 5 غم في هذا البحث، وطبقا لبروتوكول العلاج بالليزر تم تقسيم الفئران الى مجموعتين، المجموعة السليمة (90 (n= والمجموعة المصابة بسرطان الغدة اللبنية((AM3 (90 (n=. تم تشعيع الغدد اللمفاوية العنقية ل75 فارة من كل مجموعة باستخدام ليزر القدرة الواطئة ذي الاطوال الموجية (830,780,670,635,532) نانومتر. كل خمس عشرة فارة من كل مجموعة قد تم تشعيعها من احد تلك الليزرات بواسطة توجيه حزمة الليزر الى الغدد اللمفاوية لتلك الفئران مرتين في اليوم الواحد لمدة 20 دقيقة وللفترات 5، 10، 15، 20 ،25 يوم على التوالي، بينما لم يتم تشعيع مجموعة اخرى مكونة من 30فارة وذلك لاستخدامها لاغراض المقارنة مع المجاميع المشععة وللفترات الزمنية نفسها. في نهاية التجربة، تم قتل جميع الفئران بعد نهاية الفترات 5، 10، 15، 20 ،25 يوم على التوالي، لاجراء التشريح وازالة الغدد اللمفاوية بهدف اجراء الفحص النسيجي واستخدام طريقة الفحص الكيميائي النسيجي المناعي (IHC)، CD3) و(F4/80 لدراسة تاثيرات الليزر على الخلايا المناعية التي يمكن تحفيزها لتحسين وظيفة الغدة اللمفاوية بهدف زيادة استجابة الجهاز المناعي، وبعدها يتم فحص العينات تحت المجهر الضوئي.من خلال تحليل النتائج التي تم الحصول عليها في هذا البحث، وجد ان الاطوال الموجية المختلفة للليزرات القدرة الواطئة يحفز خلايا الجهاز المناعي. ان تشعيع الخلايا المناعية باستخدام ليزر واطئ القدرة كان مصحوبا بتثبيط معنوي ملحوظ في نمو الورم وكانت اغلب الملاحظات عند الاطوال الموحية 635,670 نانوميتر.الخلاصة________________________________________ان معدل زيادة نسبة T cell (في الفئران الطبيعية) في اليوم الخامس والعشرين من فترة التشعيع هي 30% فقط، بينما كان معدل الزيادة في نفس هذا النوع من الخلايا وبوجود الخلايا السرطانية 107%. وان معدل الزيادة في نسبة خلايا (macrophages) في الفئران الطبيعية في اليوم الخامس والعشرون من فترة التشعيع بالليزر ذو الطول الموجي 635 نانومتر233% والتي تقارب بنسبة كبيره لمعدل الزيادة 237% في نفس هذا النوع من الخلايا وبوجود الخلايا السرطانية .ان تاثير الليزر ذي الاطوال الموجية 635 و670 نانومتر لازال واضحا على حجم الورم للفئران المسرطنة. في اليوم الخامس من التشعيع فان الليزر ذا الطول الموجي 635نانومتر فقط قادر على ان يسبب تثبيط معنوي ملحوظ (p<0.05 ) في حجم الورم، بينما في ايام التشعيع 10، 15، 20 فقط الليزرات ذات الاطوال الموجية 635 و670نانومتر قادرة على ان تسبب تثبيط معنوي ملحوظ في حجم الورم للفئران المسرطنة المشععة. ان الليزر ذا الطول الموجي 635 نانومتر كان له التاثير الاعظم على تثبيط حجم الورم للفئران المسرطنة اذا ما تمت مقارنته مع بقية الاطوال الموجية للفئات العمرية المختلفة.نستنتج من هذه الدراسة ان تحفيز الغدة اللمفاوية يعتمد على نوع الليزر المستخدم، حيث ان هناك علاقة بين الطول الموجي لليزر المستخدم مع زيادة عدد الخلايا المناعية عندما تكون الجرعة الاشعاعية متساوية لجميع الاطوال الموجية | Low level diode laser of different wavelengths is an irradiation technique that has the ability to induce biological changes by transferring the photon energy to the targeted biological system, because of the large interest in the field biological effects of laser radiation used in laser therapy, the effect of extremely low - level laser light intensity on the immune cell activity has been studied in the animal model with well - characterized macrophages and T cells. All the experiments of this study were performed in the laboratories of the Iraqi center for cancer and medical genetics research (ICCMGR). A total number of 180 female white mice of two months age and mean weight of 25 ± 5 g were examined in this project. According to the laser treatment protocol the mice were divided into two groups, normal (n=90) and adenocarcenoma inoculation (n= 90). The cervical lymph nodes of only 75 mice of each group were irradiated by different wavelengths LLL (532, 635, 670, 780, and 830) nm. Each of the 15 mice were irradiated by one of these lasers by directing the laser beam to the mice lymph node for 20 mins for a period of 5,10,15,20 and 25 days. This was done twice daily. While the other 30 mice were not irradiated to use them for comparison study with the irradiated groups for the same mentioned periods of time. At the end of the experiment, the animals were killed. Each mouse was fixed on the back of anatomical slab. The specimen (lymph node) after removal were taken for histo - pathology exam and the immunohistochemistry (IHC) method (markers CD3 and F4/80) was used to study the effects of lasers on the macrophages and T lymphocyte cells which can be stimulated in order to enhance the lymph node function, and as a Abstract________________________________________result, enhance the immune system response. Then, the slides were examined microscopically. Through the analysis of the data obtained from this study, it was found that different wavelengths LLL stimulated the immune cells (T and Macrophages), the irradiation of these cells with LLL was associated with a remarkable and significant growth inhibition most noticeably at laser wavelengths of 635 and 670 nm. The average increase in the percentage of T cells (in healthy mice) at the 25th day of exposure to 635 nm laser light was only 30% while the average increase of such cells in the presence of cancer cells was 107%. In contrast, the average increase in the percentage of macrophages (in healthy mice) at the 25th day of exposure to 635 nm laser light was 233% which was very close to the average increase (237%) in the presence of cancer cells. The effect of the laser wavelengths of 635 and 670 nm was still obvious on the tumor volume of cancerous mice. At the fifth irradiation day, the only laser wavelength of 635nm was able to cause a noticeable significant (p<0.05) decrease of tumor volume of the irradiated cancerous mice. While at the exposure days 10, 15 and 20 the only two laser wavelengths of 635 and 670 nm were able to cause a noticeable significant decrease of the tumor volume of the irradiated cancerous mice. The laser wavelength of 635 nm has the maximum significant decrease of tumor volume of cancerous mice in comparison with irradiation of other laser wavelengths at different age groups. As a conclusion for this study, stimulation of lymph node depends on the kind of the used laser. There was a relationship between the used laser wavelength and the increment in the number of the T - cells and Macrophages when the laser dose was uniform for all wavelengths.

الرنين التنفقي في تركيب الشبيكة الفائقة نوع GaAs/ AlGaAs Resonance Tunneling in GaAs/AlGaAs Superlattice Structure

اسم المؤلف: مروى نجيب نجم الدين عبد الله
اسم المشرف: موفق كاظم عبد الرضا ابراهيم رمضان عاكول
الموضوع العام: علوم الفيزياء
السنة: 2006
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الاطروحة قدمت دراسة نظرية حول التنفق الرنيني في تركيب الوصلة الغير متجانسة للشبيكة الفائقة من .GaAs/Al0.3Ga0.7Asفقد قمنا بتحليل الحل العددي المضبوط والبسيط لمعادلة شرودنجر غير المعتمدة على الزمن ذات البعد الواحد لمسالة البئر الكمي. لذا يمكن حساب جميع مستويات الطاقة المقيدة وشبه المقيدة وكذلك دوالها الموجية للشكل الاعتباطي لمظهر الجهد. ان التنفق الرنيني لنظام متعدد الحواجز قد تم بحثه باستخدام تقنية مصفوفة النقل (التحويل). لقد اشتقت علاقة عامل النفوذية من خلال استخدام هذه التقنية (تقنية مصفوفة التحويل) مع دراسة جميع الاحتمالات في تغير عرض كل من الحاجز والبئر بالاضافة الى تغير عدد الحواجز. وقد استخرجت الطاقات الرنينية من العلاقة البيانية التي تربط عامل النفوذية وطاقة الجسيمات الساقطة على الحاجز عند الاخذ بنظر الاعتبار قيمة عامل النفوذية مقترب الى الواحد ولمختلف ابعاد الحاجز والبئر وعدد الحواجز. وفيما يتعلق بزمن عمر التنفق الرنيني للنظام من الممكن شرحه كيفيا (سلوكيا) من خلال مبدا الللادقة لهايزنبرك حيث تتناسب Δε عكسيا مع زمن عمر المستويات الطاقية (Γ) الموجودة في البئر الكمي. فالالكترونات ذات المستويات الطاقية العليا في البئر الكمي لها ان تنتفق عبر الحواجز الفعالة الواطئة ولهذا يكون لهزامن عمر قصير. جميع هذا العمل قد تركز بصورة خاصة على مبدا التقيد المكاني (الفضائي) لتاثيرات التكمم الطاقي. واظهرت نتائج هذا العمل بانها ليس فقط تضئ المفهوم الفيزيائي لفكرة التنفق الرنيني في تركيب الحاجز الكهربائي بل انها تعدت ذلك الى كيفية تصميم النبائط الكمية اللالكترونية والمستندة على تراكيب التنفق المتعدد الحواجز. ان جميع الحسابات في هذه الدراسة قد استندت على استخدام الحقيقة البرنامجية نوع (Mathcad Professional 14.0 2007). | In this thesis, a theoretical study of resonant tunneling in superlattice GaAs/Al0.3Ga0.7As structure is presented. We have analyzed a simple and accurate numerically solving the one - dimensional time - independent Schrödinger equation in quantum well (QW). One can thus calculate all bound and quasi - bound energy levels and the corresponding wave function for an arbitrarily shaped potential profile. Resonant tunneling in multi barrier is investigated by using transfer matrix technique. The formula for the transmission coefficient is derived from the same technique and then varying in the barriers and wells width and barriers numbers to find their effect on the transmission coefficient. The resonant energies are found from the curve between T vs. ε when taking into the account the condition T≈1; and its dependence on the barrier and well width for different barrier numbers are analyzed. Resonant tunneling life time for the investigated system can be qualitatively explained by the Heisenberg uncertainty principle since Δ ε should be inversely proportional to the lifetime (Γ) of the states in the well. Electrons at higher levels in the well have to tunnel through lower effective barriers and should therefore have a shorter (Γ). Thus all of the work in this area has focused almost exclusively on spatial confinement of energy quantization effects. The results shown in this work not only shed new light on the physics of resonant tunneling in electric barrier structure but are also helpful in designing quantum devices based on multi barrier tunneling structures. The program, which has been used for all the calculations in this work, is Mathcad Professional 14.0 2007 software

الخواص الكهربائية لنبائط شوتكي Ni / n - GaAs المشعع بجسيمات الفا وتاثيرات التلدين الحراري فيها The Electrical Properties Of Schottky devices Ni /n - GaAs Radiated With Alpha Particle And Its Thermal Annealing Effect

اسم المؤلف: مسعود خليل شكيب
اسم المشرف: ابراهيم رمضان عاكول كاظم حسن حسين الموسوي
الموضوع العام: علوم الفيزياء
السنة: 2006
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الكلمات الدلالية:
  • فيزياء الحالة الصلبة
الصفحات الاولى:
المستخلص: في هذا البحث تم تصنيع ومقارنة نوعين من نبائط شوتكي Ni/n - GaAs ( المشععة بجسيمات الفا وغير المشععة ) حيث تم اختيار الارضيـــــــة ( substrate ) واختيار المعدن المرسب للاتصال الفوقي باستخدام النيكل مع اختيار سبيكة الذهب - جرمانيوم Ge - Au للاتصال الخلفي من نوع n وقد تم اختيار معدن ارسنيد الجاليوم GaAs وذلك لامتلاكه تحركية عالية نسبيا مقارنة بالسيليكون وتكون مقاومتها اقل من السيليكون عند درجة حرارة الغرفة .تم تحضير نماذج من Ni/n - GaAs وقمنا بتشعيع الجزء الاول بجسيمات الفا وكانت مشععة بالجرع ( 1.48 x 105 - 5.91 x 105 ) p/cm2 وقمنا بدراسة اليات التوصيل الكهربائي للتيار للنبائط كافة حيث تبين ان الية توصيل التيار للنبائط غير المشععة هي الانبعاث الحراري وان ارتفاع الحاجز كان بحدود ( 0.66 eV ) وعامل المثالية ( 1.1 ) وزادت قيم هذين المتغيرين مع زيادة جرع الاشعاع كما وتغيرت الية توصيل التيار لتصبح علاقة التولد - الاتحاد والتيار المحدد بالشحنة الفضائية بعد عملية التشعيع . كما تبين ان ادخال التلف الاشعاعي الى منطقة الاستنزاف لحاجز شوتكي بسبب نقصان في قيمة التيار الامامي عند الفولتيات العالية وعلى عكس من ذلك فانه بسبب زيادة في تيار الانحياز العكسي التي يعود سببها الى تيارات التسرب السطحية المتولدة بسبب التلف الشعاعي .اما نتائج مميزات السعة - فولتية للانحياز العكسي فقد اظهرت ان زيادة التلف الحاصل في النبائط يقلل السعة فضلا عن نقصان تركيز الحاملات من ( 1.16 x 1018 ) cm - 3 للنبائط غير المشععة الى ( 2.57 x 1017 ) cm - 3 للنبائط المشععة بالجرعة ( 5.91 x 105 ) p/cm2 وذلك بسبب تولد مراكز تعويضية Compensating Centers وبالتالي تكون منطقة ذات مقاومية عالية .اظهرت هذه النتائج بان قيم ارتفاع الحاجز Φ B تتطابق بشكل جيد مع قيمها المحسوبة من قياسات التيار - فولتية .ان سعة النبائط تزداد بانتظام مع زيادة فولتية الانحياز الامامي وتصبح هذه الزيادة سريعة عند منطقة الفولتيات العالية وهذه الحالة تناظر منطقة الحزمة المسطحة اذ انه يزداد التغير في الحزمة المسطحة وتقل السعة كلمزااد مستوى التشعيع .تم انجاز عملية التلدين الحراري على النبائط المشععة بالجرعة ( 5.91 x 105 ) p/cm2 عند درجات الحرارة ( 423 - 523 ) K وعند مقارنة خواص النبائط المشععة الملدنة مع النبائط غير المشععة تبين ان خواصها تقترب من خواص الحالة غير المشــععة بعد التلدين الحــراري ، وذلك لحصول عملية الاستقرار في العيوب المتولدة نتيجة الاشعاع ولوحظ بان تاثيرات التلدين الحراري تكون مؤقتة لان التلف الحاصل بعملية التشعيع هو من النوع الدائم .كماو قمنا بدراسة مميزات التيار فولتية عند درجات الحرارة الواطئة وقد بينت هذه النتائج ان طاقات التنشيط ∆E1 و∆E2 تقل مع زيادة مســــــــتوى التشعيع من القيمتين ( 0.15 - 0.031 ) eV قبل عملية التشعيع الى القيمتين ( 0.055 - 0.011 ) eV على الترتيب بعد عملية التشعيع بجرعــة ( 5.91 x 105 ) p/cm2. | In this research , two types of Ni /n - GaAs schottky barrier devices were fabricated (unradiated,irradiated with alpha particle ) and compared .We take the substate from GaAs and Ni to the deposited metals for up contact with Ge - Au ingot for down contactn type , the purpose of taking GaAs because of its high movement in comparing with Si and its resistance is less than Si in room temperature.We prepare samples from Ni / GaAs , the fist part of samples is radiated by alpha particle with doses (1.48 x 105 - 5.91 x 105 ) p / cm2 and when we study the electrical contact mechanics to all devices we found that the electrical contact mechanics to unradiated devices is the thermonic emission and the height of the barrier approximately is (0.66 eV) and the ideality factor is (1.1) , the value of these two factors changed by increase the dose of radiation and the electrical contact mechanics was changed and become recombination currentand the space church current after the radiation action.When we put the radiation destroy inside the exhaustion aria for schottky barrier the value of the forward current decreases with high volts and vise verse the reveres current increase because of the top follow currents in purpose of radiation destroy .The result of (C - V ) characteristics for reveres currentappear that the destroy increase in the devises make the capacity decrees with carrier concentration from (1.16 x 1018)cm - 3 for unradiated devices to ( 2.57 x 1017) cm - 3 for irradiateddevices with dose (5.91 x 105) p/cm2 because of the compensating centers and become the high resistance reign the results show that the high of barriers ФB is the same with its value that we calculated from the measurement of (I - V ) .the capacity of devices increase with the increase of forward voltage and this increase become more in high voltage reign , this state is the same with flat beam reign when the reign increase and the capacity decreases with increase the level of the radiation .the annealing action was done on the irradiated devices with the dose (5.91 x 105) p / cm2 in the temperatures (423 - 523) K .when we compared the properties of the annealing irradiated devices with the unradiated devices we saw that its properties become near with unradiated devices after annealing because of the stability in defects because of the radiation , and we notice that the defects is from the type of lasting .also we study the characteristics of ( I - V ) in law temperature and we notice that the activation energies decreases with the radiation level ∆E1 and ∆E2 with the values before radiation ( 0.15 - 0.031) eV to ( 0.055 - 0.011) eV after radiation by the dose ( 5.91 x 105) p / cm2

دراسة الخصائص الطيفية والحرارية لجزيئتي (CO ،CO2) باستخدام طرائق الكم الشبه تجريبية Study of Spectroscopic And Thermodynamic Properties Of (CO ,CO2) Molecules By Using The Semiemperical Quantum Methods

اسم المؤلف: مشتاق طالب جاسم الهلالي
اسم المشرف: محمد تقي حسين كاظم حسن حسين الموسوي
الموضوع العام: علوم الفيزياء
السنة: 2005
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا البحث دراسة نوعين من الجزيئات الخطية هما جزيئة ثاني اوكسيد الكاربون كنموذج للجزيئات الخطية متعددة الذرات وجزيئة احادي اوكسيد الكاربون كنموذج للجزيئات الخطية ثنائية الذرة، وشملت هذه الدراسة خواصها الطيفية والحرارية حيث تم حساب الشكل الهندسي الفراغي للجزيئة ورسم منحني طاقة الجهد لها ومنه تم حساب طاقة الجزيئة الكلية عند وضع التوازن للجزيئة حيث كانت قيمة الطاقة الكلية لجزيئة CO2 ( - 706.159ev) عند طول اصرة (C - O) (1.2Ao) والطاقة الكلية لجزيئة CO ( - 411.166ev) عند طول اصرة (C - O) (1.2Ao)، كذلك ومن خلال منحني طاقة الجهد تم حساب طاقة التفكك الطيفية للجزيئة حيث كانت طاقة التفكك الطيفية لجزيئة CO2 تساوي (6.8ev)، بينما كانت طاقة التفكك الطيفية لجزيئة CO تساوي (14.95ev).كذلك تم حساب الترددات الاهتزازية عند وضع التوازن وانماط الاهتزاز الاساسية والاطوال الموجية لكل جزيئة، وتم ايضا حساب مستويات الطاقة لكل جزيئة ومعرفة طاقة اعلى مدار جزيئي مشغول EHOMO وطاقة ادنى مدار جزيئي غير مشغول ELUMO حيث كانت قيمتها لجزيئة CO2 ( - 12.735ev) و(1.035ev) على التوالي وقيمتها لجزيئة CO ( - 13.03ev) و(0.563ev) على التوالي.وكذلك تم حساب فجوة الطاقة وجهد التاين لكل جزيئة حيث كانت قيمة فجوة الطاقة لجزيئة CO2 تساوي (13.77ev) وجهد تاينها (12.735ev) بينما كانت فجوة الطاقة لجزيئة CO تساوي (13.59ev) وجهد تاينها (13.03ev).كما تم ايضا ومن خلال برنامج Hyperchem توضيح كثافة الشحنة الكلية (Total charge density) وجهد الكهربية الساكنة (Electrostatic potential) لكل جزيئة بالرسومات ذات البعدين والثلاثة ابعاد بالاضافة الى عزم ثنائي القطب حيث كان لجزيئة CO2 (0.0002831 deby) ولجزيئة CO (0.185 deby).كذلك تمت دراسة الخواص الحرارية (الثرموديناميكية) لكل جزيئة عند مدى حراري امتد من 100K الى 2000K حيث كانت قيم الخواص الحرارية لجزيئة CO2 وCO عند حرارة 298K كالاتي : الجزيئة Molecule السعة الحراريةHeat Capacity (Cal/K.mol) حرارة التكوينHeat of Formation(Kcal/mol) الانتروبيEntropy (Cal/K/mol) الانثالبيEnthalpy (Cal/mol)CO2 9.472 - 86.039 53.009 2340.340CO 6.9589 - 19.751 47.2 2065.849وتم رسم العلاقات البيانية بين هذه الخواص ودرجة الحرارة ومناقشة النتائج بعد مقارنتها مع النتائج العملية.تمت هذه الحسابات جميعها باستخدام الطريقة شبه التجريبية MNDO - PM3 ومقارنتها بالطرائق شبه التجريبية الاخرى MINDO/3، AM1، MNDO، حيث اعطت نتائج اقرب الى النتائج العملية. | In this research we study two kinds of linear molecules they are carbon dioxide molecule as a type for the multi atoms and carbon monoxide as a type for he linear diatom molecule.We calculated some of spectroscopy and thermodynamic properties of these molecules. This included calculation of equilibrium geometry, potential curve, from this curve total energy of molecule at equilibrium distance calculated, for CO2 molecule total energy was ( - 706.159 ev) at bond length (C - O) (1.2Ao), for CO molecule total energy was ( - 411.166 ev) at equilibrium distance (1.2Ao). and from potential curve spectroscopy dissociation energy for these molecule were calculated, for CO2 equal (6.8 ev) and for CO equal )((14.95 ev).And calculated vibration frequencies at equilibrium state and basic vibrational modes, wave length and energy levels for each molecule, to determine energy of high occupied molecular orbital EHOMO and energy of low unoccupied molecular or orbital ELUMO, it has value ( - 12.735ev), (1.035ev) respectively for CO2 molecule, and for CO molecule ( - 13.03ev), )0.563ev) respectively.In this work calculated the energy gap and iozation potential for each molecule, where it has value of energy gap for CO2 molecule equal (13.77ev) and it has iozation potential (12.735ev); while the energy gap for CO molecule equal (13.59ev) and it has iozation potential (13.03ev).From the hyperchem program it explain the total charge density and electrostatic potential for each molecule by graphics at two dimension and three dimension. Although, the dipole moment of CO2 molecule equal to (0.0002831) deby, while to CO molecule equal to (0.185) deby.Thermal properties for each molecule at thermal range (100 - 2000)K was studied.Thermal properties values for CO2 and CO molecules at 298K shown in the table : Molecule Heat Capacity (Cal/K.mol) Heat of Formation(KCal/mol) Entropy (Cal/K/mol) Enthalpy (Cal/mol)CO2 9.472 - 86.039 53.009 2340.340CO 6.9589 - 19.751 47.2 2065.849and plotting graphic relations among these properties and temperature and discussion result and compared with experimental result.All calculations by using semiemperical method (MNDO - PM3) from among the other methods (MINDO/3, AM1, MNDO) because it gives close result for partial result.

دراسة الخصائص الطيفية لجزيئة 9,10 - دايفينيل انثراسين Study of Spectroscopic Properties of 9, 10 - Diphenyle anthracene Molecule

اسم المؤلف: مروة محمد جاسم
اسم المشرف: زياد عدنان صالح
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا العمل، تم قياس ودراسة الخصائص الطيفية للمحاليل التي تشمل اطياف الامتصاص والفلورة لمركب (9,10 - دايفينيل انثراسين DPA) المذاب في عدد من المذيبات القطبية وغير القطبية عند الطول المجي المهيج (λex=365 nm), كما تم حساب الكفاءة الكميه وزمن العمر. واستخدم تركيز مخفف لغرض التقليل من ظاهرة الامتصاص الذاتي. وان المذيبات المستخدمة لاذابة DPA)) هي (السايكلوهكسان , 1, 4 - ديوكسان ,البنزين, الايثانول وثنائي ميثيل سلفوكسيد) مع ثوابت عازل (47.2, 24.3 ,2.27 ,2.21,2.02) على التوالي. حيث وجد ان الكفاءة الكمية لمحلول DPA في السايكلوهكسان ,4 - 1 ديوكسان والبنزين عند التركيز [1×10 - 5M] تساوي (qFM =0.956)، ( (qFM = 0.952 و(qFM= 0.947) على التوالي. ولكن عند حساب الكفاءة الكمية لمحلول DPA في الايثانول، والثنائي ميثيل سلفوكسايد وجدت انها تساوي(qFM= 0.904) و(qFM= 0.88) . ان هذا الاختلاف في قيمة الكفاءة الكمية يرجع الى قطبية المذيب.اظهرت زيادة في زمن العمر الاشعاعي مع زيادة قطبية المذيب . كما لوحظ ان هناك ازاحة لطيف الفلورة باتجاه منطقة الطول الموجي الطويل (ازاحه حمراء) وانخفاض في شدة الفلوره مع زيادة قطبيه المذيب. وقد تم حساب معدل العمليات الاشعاعي (KFM)، واللااشعاعي (KIM) وازاحة ستوك. كل القياسات تمت في درجة حرارة الغرفة. من جهة اخرى, تظهر هذه الدراسة الخصائص التركيبية والبصرية والكهربائية للاغشية الرقيقة لل DPA النقي والمشوب بالانثراسين عند نسب تشويب(20,15,10,5)=x % والمحضرة بطريقة الرش الكيميائي الحراري على الواح من الكوارتز والزجاج على حد سواء وبتركيز مولاري [1*10 - 2 M]. تشير نتائج فحوصات الاشعة السينية (XRD) الى ان اغشية DPA النقي والمشوب بالانثراسين ذات طبيعة تركيبية متعددة التبلور. اشتملت دراسة الخواص البصرية لاغشية DPA النقي والمشوب بالانثراسين على قياسات طيفي الفلورة والامتصاص ولمدى اطوال موجية (300 - 650nm), حيث لوحظ نقصان في قيمه فجوة الطاقة البصرية مع زيادة معدل التشويب. ان الخصائص الكهربائية لاغشية DPA النقي والمشوب بالانثراسين قد تمت دراستها.ولهذه الاغشية طاقتي تنشيط ضمن المدى الحراري (35 - 155 °C) .ولكل طاقة تنشيط ميكانيكية توصيل مختلفة التي يمكن تفسيرها بالاعتماد على نظرية الحزم لشبه الموصل. اثبتت قياسات تاثير هول ان اغشية DPA النقي والمشوب بالانثراسين عند نسب تشويب مختلفة هي اشباه موصلات عضوية من النوع الموجب (p - type). | In the present work, the spectroscopic properties which includes the absorption and fluorescence spectra of solutions for compound (9, 10 - Diphenylanthracene) dissolved in polar solvents and non - polar solvents at excitation wavelength (λex=365 nm) had been measured and investigated .The quantum yield and lifetime were calculated. Diluted solutions were used to eliminate the effect of self - absorption phenomena. The solvents which were used to dissolve DPA are (cyclohexane, 1, 4 - dioxane, benzene, ethanol, and dimethylsulfoxide) with dielectric constants (2.02, 2.21, 2.27, 24.3, 47.2) respectively. It is found the quantum yield of solution DPA in cyclohexane, 1, 4 - dioxane and benzene at concentration [1×10 - 5M] is equal to (qFM= 0.956), (qFM= 0.952) and (qFM= 0.947) respectively. But the calculated quantum yield of solution DPA in ethanol, and dimethylsulfoxide were found (qFM= 0.904) and (qFM= 0.88). This difference in the values of quantum yield is due to the solvent polarity. The results showed an increase in the radiative lifetime with increasing of solvent polarity. Also, a shift in the fluorescence spectra toward long wavelength region (red shift) and decreased the intensity with increase of the polar solvents had been noticed. The rate parameter of radiative (KFM), non - radiative (KIM) and Stoke shift were calculated. All measurements were at room temperature. On the other hand, this study shows the structure, optical and electrical properties of DPA pure and dopant anthracene thin films with doping ratios x=(5,10,15,20)% were prepared by chemical spray pyrolysis technique, which deposited on glass and quartz substrate ,are both which have been used at molarity concentration [1*10 - 2 M]. The results of examinations X - ray (XRD) indicate that the DPA pure and dopant anthracene films are polycrystalline in nature structure. Optical properties measurements are include fluorescence and absorption spectra in the wavelength range (300 - 650nm), the optical energy band gap of pure DPA and dopant anthracene films are observed they are decreasing with increasing rate doping. Electrical properties of DPA pure and dopant anthracene films have been studied. These films have two activation energies (Ea) within range thermal (35 - 155 °C).Each activation energy has different mechanical connecting which could be interpreted by relying on the bands theory of semiconductor. Also, the Hall Effect measurements prove that pure DPA and dopant anthracene thin films are p - type organic semiconductor

ايجاد تراكيز اليورانيوم والرادون في ترب لمناطق من جنوب شرق بغداد باستخدام كاشف الاثر النووي (CR - 39) Determine Uranium and Radon Concentration in Soil Taken from Area Situated in South East of Baghdad by Using the Nuclear Track Detector(CR - 39)

اسم المؤلف: محمود سالم كريم
اسم المشرف: نجيبة عبد الله حسن الحمداني ندى فاضل توفيق
الموضوع العام: علوم الفيزياء
السنة: 2004
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يستهدف البحث ايجاد تراكيز اليورانيوم وغازالرادون في التربة لمناطق من جنوب شرق بغداد(الوردية والتويثة وحي الرياض) للتعرف على مدى تلوث تلك المناطق باليورانيوم جراء العبث بالمصادر المشعة التابعة لمنظمة الطاقة الذرية. ان هذه الدراسة تعد من الدراسات البيئية المهمة في مجال التعرف على مدى التلوث البيئي للمناطق السكنية القريبة من منظمة الطاقة الذرية بعد احداث الحرب على العراق عام (2003). تضمن الجزء الاول ايجاد تراكيز اليورانيوم في التربة باستخدام تقنيةعد اثار شظايا الانشطارفي كاشف(CR - 39) الناتجة من انشطار نواة U238 بالنيوترونات السريعة من المصدر النيوتروني(241 Am - Be) . اما الجزء الثاني فقد تضمن ايجاد تراكيز غاز الرادون في التربة باستخدام تقنية عد اثار جسيمات الفا المنبعثة من غاز الرادون في كاشف الاثر (CR - 39) . تم تحديد التراكيز بالحسابات المعتمدة على المقارنة مع النماذج القياسية, وقد اوضحت النتائج التي حصلناعليها ان اعلى تركيز لليورانيوم كان في منطقة الوردية(5.3 ppm) تليها التويثة(3.45 ppm) فحي الرياض (3.34 ppm) وان اعلى تركيز لغازالرادون كان في منطقة الوردية 697.18 Bq/m3) ) يليها حي الرياض(163.54 Bq/m3) فالتويثة (119.17 Bq/m3) ويتضح تلوث منطقة الوردية باليورانيوم والرادون اكثرمن بقية المناطق | The aim of research is to determine Uranium and Radon concentration in soil samples taken from area situated in southeast of Baghdad (AL - Wardia, AL - Twitha and Haiy AL - Ryaid) to determine the level of concentration of these areas with Uranium this contamination was due to the mis - handeled of the radioactive sources of the Atomic Energy Oganization after the war Iraq in(2003).The first part consists the determination of Uranium concetration in soil samples using fission tracks registration in (CR - 39) detector obtained by the bombardment of U238 with fast neutrons from (241 Am - Be) neutron source.The second part concerns with the determination of Radon concentration in soil by using alpha - emitters registration which emittfrom Radon gas in (CR - 39) detector.The concentration values were calculated by a comparsion with standard samples.The results obtained shows that the Uranium concentrations in AL - Wardia (5.3 ppm) after it in AL - Twitha (3.45 ppm)and Haiy AL - Ryaid (3.34 ppm) and the higher concentrations to Radon gas in AL - Wardia (697.18 Bq/m3) after it in Haiy AL - Ryaid (163.54 Bq/m3) and AL - Twitha (119.17 Bq/m3) we show that Uranium and Radon concentration in AL - Wardia is higher than the other regions.

بناء دوائر مشغل ليزر شبه الموصل المرئي لقياس المسافة Driver circuit construction using visible semiconductor laser for distance measurement

اسم المؤلف: محمد فرحان راهي الدريساوي
اسم المشرف: بان رشيد علي
الموضوع العام: علوم الفيزياء
السنة: 2010
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: In this research study and construction of electronic circuits the ability of the laser (laboratory) are mediated by the semiconductor laser in the visible spectral response of the photon detector. (0.35 - 1.35) μm and the estimated circuit composed of the following : A - The transmission unit. B - A unit of receipt. T - Service counter. W - Department of calibration of the counter. C - Department of Qallab the counter to generate the highfrequencies to calculate the time. H - and the cargo unit. G - Department of lasers operating space. D - The department of central processing. All of these services are designed and run program brokered Multisium 2007. And the distance measured this ability is mediated. (100m) and will be equipped with a battery system and reloading as well as the lowest sensitivity possible capacity for the reflected radiation (0.11×10 - 9W)

تصنيع كاشف المفرق الهجين CdO/p - Si بطريقة الرش الكيميائي الحراري PREPARATION OF CdO/p - Si HETEROJUNCTION DETECTOR BY CHEMICAL SPRAY PYROLYSIS

اسم المؤلف: محمد غفار فرج
اسم المشرف: رائد عبد الوهاب اسماعيل سلوان كمال جميل
الموضوع العام: علوم الفيزياء
السنة: 2004
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا البحث، تم لاول مرة تصنيع كاشف يعمل بنمط الفولتائية الضوئية من المفرق الهجين غير المتماثل n - CdO/p - Si والمصنع بطريقة الرش الكيميائي الحراري وباسماك 50, 100 and 150 nm وتم استخدام عدة فولتيات انحياز تراوحت بين 1 - 5 Volts. لقد اوضحت النتائج ان هذا الكاشف يعمل بالمدى الطيفي 400 - 1000 nm.بينت نتائج قياسات تاثير هول ان الطبقة المرسبة من CdO ذات توصيلية مانحة لذلك فان المفرق المتكون هو من النوع غير المتماثل.اظهرت نتائج خصائص تيار - جهد ان كل من تيار الظلام وتيار الضوضاء يزدادان بزيادة سمك CdO. كشفت هذه النتائج ايضا ان عامل المثالية يزداد بزيادة سمك غشاء CdO مما يعطي مؤشرا واضحا على زيادة تركيز العيوب.بينت نتائج قياس سعة - جهد ان المفرق المصنع من النوع الحاد وان قيمة جهد البناء الداخلي تقل بزيادة سمك CdO.ان الدراسات الخاصة بالاستجابة الطيفية بينت ان لهذه الكواشف استجابية تتميز بقمتين : الاولى عند الطول الموجي 600 nm والثانية عند الطول الموجي 800 nm. وبلغت اعلى قيمة للاستجابية 0.46 A/W عند الطول الموجي 800 nm وباستخدام جهد انحياز 3 Volts وان الكفاءة الكمية القصوى بلغت 71% واعلى قيمة للكشفية كانت بحدود 3.6 x 1011 cm.Hz1/2.W - 1 كما ابدت الكواشف المصنعة استجابة لليزر He - Ne. وقد وجد ان الاستجابية الطيفية تقل بزيادة سمك غشاء CdO وان افضل سمك في هذا البحث هو 50 nm

دراسة وتحقيق بشان عدم استقرارية الانجراف المنحني في الغلاف المغناطيسي للنجم النابض بالقرب من منطقة الاسطوانة الضوئية Study and Investigation of Curvature Drift Instability in Pulsar Magnetosphere Near Light Cylindrical Region

اسم المؤلف: محمد عبد الستار عبد الرحمن
اسم المشرف: ماجدة حمدان خضير الكبيسي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The case of curvature drift instability in pulsar magnetosphere is a phenomenon may be responsible of many properties including radio waves, that was studied its reasons. We studied the magnetic fields around the pulsar, and our study was nearby the light cylinder region, because the curvature of the magnetic field be greater in the light cylinder region (~ 107 cm).The value of magnetic field was calculated by using mat lab program in two ways : The standard model and relativistic model. Where the relativistic model includes two cases : flat space time and curved space time. The values of the two cases were compared, According to standard model the magnitude magnetic field component (Br ) equal to 1012 G and the magnitude magnetic field component (Bθ ) equal to 1011 G but in relativistic model equal to 1019 G and 1014 G respectively and this noticeable increasing in values because the mass factor enter in calculation , This was first part from study.The second part of the study includes the calculation of drift velocity, which was about (107 cm/sec) in standard model, The drift velocity in relativistic model was (102 cm/sec), Where the drift velocity values which can produce the curvature radiation must be in the range between (106 cm/sec) and less than the speed light.The calculated drift velocity was used to calculate the growth rate instability for each the primary particles which its Lorentz factor equal (108), the value of growth rate instability (1013 s - 1), and the energy loss rate (10 - 6 erg.s), while the secondary particles which its Lorentz factor equal to (104), the value of growth rate instability was (1015 s - 1) and the energy loss rate equal to (10 - 21 erg.s)
1 ... 276 277 278 279 280 ... 479