عرض: 25 50 75 100 النتائج

نتائج البحث: 25 من أصل 33,347

تقييم المقاطع العرضية لليورانيوم للتفاعلات المستحثة بالنيوترون Cross Sections Evaluation of Uranium for Neutron Induced Reactions

المستخلص: لقد تم في هذا البحث حساب قيم المقاطع العرضية لنظائر اليورانيوم (A=230 - 238) للتفاعلات المستحثة بالنيوترونات التالية ,,,(n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), (n,γ), (n,p), (n,t), (n,d), (n,α), (n,2α),and (n,2p)المقاسة بفترات مختلفة من الطاقة حيث ان هذه القراءات تم اخذها من الوكالة الدولية للطاقة الذرية (IAEA ) ومن المكتبات المشهورة عالميا مثل EXFOR, CINDA, ENDF, JEFF, JENDL,ROSFOND,CENDL,WIND, TENDL, BROND, IRDF, EAF وقد تم قياسها في الفترة الاولى من منتصف القرن الماضي وحتى اخر سنوات الماضية .لقد تم تحليل المديات الكاملة للطاقة لكل تفاعل وقد تم اعادة حساب وتقييم المقاطع العرضية ضمن فترات صغيرة مختلفة حسب مديات الطاقة للنيوترون القاصف مع الاخطاء المرافقة لها. قد تم وضع صيغ رياضية لمتعددة الحدود في معظم التفاعلات والتي تربط بين تغيير المقطع العرضي مع الطاقة والتي يمكن استخدامها للتنبىء بقيم المقاطع العرضية غير المحسوبة. لقد تم حساب قيمة Q - للتفاعل وطاقة الربط وطاقة العتبة وفرق الكتلة وعامل الرص لكل تفاعل ولكل عنصر هدف. ان التقييمات اعتمدت بشكل رئيسي على حسابات نموذج الجهد البصري لقد اعتمدت الحسابات على معاملات الجهد البصري النووي حيث تم اختيار وجمع المعلومات من مكتبة (RIPL) التابعة للوكالة الدولية للطاقة الذرية. لقد قمنا بدراسة صيغتين مختلفتين لنموذج الجهد البصري حيث ان الصيغة الاولى تسمى نموذج الجهد البصري القياسي والمعاملات ماخوذة من مكتبة Beijing والصيغة الثانية لنموذج الجهد البصري قد تم حسابها بتحديد ثلاث مديات طاقية. لقد قمنا بدراسة نسبة التفاعل (n,f) لكل نظير من نظائر اليورانيوم نسبة الى يورانيوم - 235 والذي يعتبر نموذج قياسي. لقد قمنا بحساب هذه النسبة لجميع التفاعلات المتوفرة لدينا وليس فقط تفاعل الانشطار واحتسبناها نسبة الى يورانيوم - 235.حساب اخر تم اضافته الى هذه الدراسة وهو دراسة تاثير التلوث لوليدة اليورانيوم - 237 والتي هي نبتونيوم - 237 بعمر نصفي 6.8 يوم وكذلك حساب الفيض النيوتروني لكل منهما. | The cross sections of Uranium isotopes (A=230 - 238) for the (n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), (n,γ), (n,p), (n,t), (n,d), (n,α), (n,2α),and (n,2p) reactions are calculated with different energy intervals which are collected from International Atomic Energy Agency (IAEA). The available cross sections data for the reactions mentioned above are collected from the well known international libraries like EXFOR, CINDA, ENDF, JEFF, JENDL, ROSFOND, CENDL, WIND, TENDL, BROND, IRDF, EAF and measured during the period from the middle of the last century up to several years ago.The cross sections are reproduced in fine steps of incident neutron energy in different intervals with the corresponding errors. The recommended cross sections for all available experimental data have been calculated for all considered reactions mathematical representative equations for all these reactions are formulated. These equations represent the variation of the cross section with energy, which could be used to predict the values of uncalculated cross sections.Q - value, threshold energy, binding energy, mass excess, and packing fraction for each reaction and target element have been also calculated.The evaluations are based mainly on the calculations of the optical model potential. The calculations are based on the nuclear optical potential, where the relevant parameters are collected and selected from Reference Input Parameter Library (RIPL) which is being developed under the international project coordinated by the International Atomic Energy Agency (IAEA). We study two different formula for optical model potential the first formula is the standard optical potential model and its parameters are taken from Beijing library. The second formula is the optical potential with different energy ranges. We study the ratio of the (n,f) cross sections for each Uranium isotopes relative to (n,f) cross section for U - 235 which could be considered as a standard sample. We have done the ratio not for the (n,f) cross sections only but also for other reactions like ,(n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), and (n,γ) relative to U - 235 reactions cross sections.Another evaluation is added to cross sections is the effect of the contamination of the daughter of U - 237 which the daughter is Np - 237 6.8day and their relative flux
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
الموضوع الدقيق: الفيزياء
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: ايمان طارق العلوي
اسم المؤلف: روناك اكرام علي

دراسة تاثير المعاملة الحرارية على الخواص التركيبية والميكانيكية لبوليمر (بولي تيترافلورواثيلين) Study the Effect of Heat Treatment on the Structural and Mechanical Properties for poly (tetrafluoroethylene

المستخلص: درس في هذا العمل نوعين من بولي تيترافلورواثيلين ( النقيين ولكن باختلاف الشركة المصنعة PTFE) (صيني _اماراتي ) بطريقه صب المحلول كافلام رقيقه واشرطة , بواسطه الخواص التركيبيه (حيود الاشعه السينيه ومسعريه المسح التفاضلي ) والخصائص الميكانيكية بدلاله درجات حراره مختلفة للدوره الحرارية . يبين كلا النوعين تغير في الشده المستطاره من المستوى القاعدي (100) عند تغير درجه حرارة الدورة الحرارية واظهر النوعين زيادة في التبلورية مع زياة درجة الحرارة .كذلك اختلاف في الانثالبي عند اختلاف درجات الحرارة حيث لوحظ زياة الانثالبي بزيادة درجة الحرارة واختلاف في الخصائص الميكانيكيه ( الاجهاد والانفعال عند نقطة الخضوع ونقطه الكسر ومعامل يونك) للبوليمر حيث اظهرت المعالجة الحرارية للبوليمر بدرجات حرارة مختلفة من اجل معرفة خصائصه ومقاومته الى الظروف البيئية ان الخواص الميكانيكية تزداد زيادة خطيا مع زيادة درجة الحرارة .لوحظ بان انتاج الشركه المصنعة الصينية افضل من ناحية النتائج لايجاد درجة التبلورية والخصائص الميكانيكيه عن انتاج الشركة المصنعة الاماراتية لنفس المادة البوليمرية | In this study two modifications of pure polytetrafluoroethylene (PTFE) [C2F4]n. China_UAE source prepared from solution cast as film and strip have been studied by structural (X - ray diffraction (XRD), Differential Scanning Calorimetry (DSC)) and mechanical properties .subjected to different temperature heating cycle. Both modifications show variation in the scattered X - ray intensity of the basal plane (100) as the temperature of heating cycle is changed and show increasing in crystallinity with the increase of temperature .Moreover, the Enthalpy of each kind is changed with difference of heat treatment where the enthalpy increase with the increase of temperature, and two modifications show different in mechanical properties for PTFE (young's modulus, stress at break, stress at yield, elongation at yield. And elongation at break) when the temperature is change ,The heat treatment of polymer to different temperatures in order to know its properties and resistance to environmental conditions results showed that the mechanical properties increase linearly with the increase of temperature.It seems that the product company of china is better than the product company of UAE in degree of crystallinity and mechanical properties for this polymer.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: مي عبد الستار محمد نجيب
اسم المؤلف: رند باسم لطفي الكرخي

الدراسه النظريه لتصميم ماكنه بؤره البلازما وتحقيق العوامل المختلفه التي تؤثر على حصيله النيترون المنبعث Theoretical study to design plasma focus machine and investigate various parameters that affect its emitted neutron yield

المستخلص: في هذا البحث تم تصميم جهاز بؤرة البلازما الكثيفة نظريا بالاعتماد على موديل (لـــي) بناءا المعادلات الرياضية لنموذج لي لكل من هندسة القطبين وعناصر الدائرة الخارجية التي تضم متسعة ومحاثة ومقاومة (RLC). وبعد اجراء الحسابات اللازمة تم ادخال نتائج التصميم في برنامج لرؤية مدى امكانية تشغيله نظريا من خلال دراسة المعلمات المختلفة التي يوفرها البرنامج وبالتالي التعرف على ظروف تشغيله والعوامل المؤثرة عليه. لقد اختير غار الديترويوم كغاز عامل في هذه المنظومة للحصول على ناتج نيتروني من اجل التفاعل النووي الاندماجي. وتم اختبار ودراسة المنظومة عند ضغطين مختلفين (3و4 تور) حيث درست مختلف معلماتها التي يوفرها البرنامج ونوقشت وقورنت النتائج بالاشكال البيانية. اضافة لذلك تمت مقارنة المنظومة المصممة مع منظومة قياسية تناظرها من حيث التركيب النظري وهي منظومة NX2 التي بنيت اساسا للحصول على الاشعة السينية باستعمال غازات النبيلة. اختير في البحث ان يكون غاز الديتريوم هو الغاز العامل للحصول على ناتج نيتروني من اجل المقارنة، حيث درست جميع معلمات التشغيل للمنظومة المصممة مع القياسية بالرسوم البيانية.لقد وجد من خلال انجاز الحسابات اللازمة بان الشكل البياني لانحدار تيار الانبوب الكلي (dip) مباشرة بعد قمة التيار مع الزمن للمنظومة المصممة متفق تماما مع الشكل العام المميز لمنظومات بؤرة البلازما التجريبية دلالة على ان حسابات التصميم صالحة لهذه المنظومة وبالتالي يمكن اجراء الحسابات. ان تصرف فولتية الانبوب مع الزمن للمنظومة المصصمة كان بنفس الشاكله مع المنظومة القياسية. وينطبق هذا على سلوك المعلمات الاخرى بين المنظومتين مثل السرعة والمسار المحوريان والمسار الى الداخل للصدمة الشعاعية ومسار وسرعة استطالة القرص ومسار وسرعة الصدمة المنعكسة شعاعيا وغيرها.تم دراسة ومقارنة تغيرات درجة حرارة البلازما مع الزمن للمنظومتين عند نفس الضغط ولضغطان مختلفان للمنظومة المصممة وكان تصرف ماكنتا بؤرة البلازما بنفس الطريقة. وتم حساب الخسائر المتولدة من الماكنتان مثل خسائر جول وبرمنشتهالنك واعادة الاتحاد وخسائر الطاقة الشعاع الخطي مع الزمن. اخيرا وجد ان المنظومة المصممة ( 1.66 × neutron per shot ) توفر ناتج نيتروني اكبر من المنظومة القياسية (5.15 × neutron per shot) . لقد تصرفت المنظومة المصممة مثل المنظومة القياسية لكن كان الاختلاف في سلوك المنظومة المصممة والقياسية هو اختلاف الترتيب الهندسي للمنظومتين من حيث هندسة الاقطاب واختلاف قيم العناصر الكهربائية للدائرة الخارجية. ان المنظومة المصممة نظريا في هذا البحث يمكن ان تكون مشروع لبناء ماكنة بؤرة بلازما تطبيقية للحصول على ناتجها النيتروني العالي للاستفادة منه في اجراء تفاعل الاندماج النووي.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
الموضوع الدقيق: فيزياء البلازما
السنة: 2014
الموضوع العام: علوم الفيزياء
اسم المشرف: مصطفى كامل جاسم رعد حميد مجيد
اسم المؤلف: رنا عيســـى بــك مــــراد

تصنيع ودراسة خصائص كاشف المفرق الهجين Cdo/ Si المشاب والمحضر بطريقة الرش الكيميائي الحراري Fabrication &Characterization Heterojunction Photodetector of Cdo/ Si by Spray Pyrolysis Technique

المستخلص: تم في هذا البحث تصنيع ودراسة خصائص كاشف المفرق الهجين نوع CdO/p - Si المشوب اذ حضرت اغشية اوكسيد الكادميوم(CdO) بطريقة الرش الكيميائي الحراري وبدرجة حرارة قاعدة ثابتة 380o C) ) وبالتراكيز المولارية M(0.1, 0.15, 0.2, 0.25) وشوبت بعنصري النحاس والالمنيوم بنسب (0.5%, 1%, 3%, 5%) على الزجاج وعلى شرائح من السليكون احادية التبلور (Single Crystal) من نوع p - type ذات اتجاهية بلورية (100) ومقاومية كهربائية (2 - 20 Ω.cm) ومن نوع n - type ذات اتجاهية بلورية(100) ومقاومية كهربائية (10 Ω.cm) وسمك يتراوح بين (400 - 600 nm) .ودرست الخواص التركيبية والطوبوغرافية والبصرية والكهربائية لغشاء CdO بتغير التركيز المولاري وبثبوت درجة حرارة القاعدة (Ts) لقد اوضحت نتائج حيود الاشعة السينية ان اغشية CdO ذات تركيب بلوري مكعب وان اعلى شدة كانت عند المستوي (111) , اوضحت النتائج البصرية ان قيم فجوة الطاقة تعتمد بشكل كبير على التركيز المولاري اذ وجدت ان قيم فجوة الطاقة لغشاء CdO النقي كانت تتراوح مابين 2.61 eV الى 2.34 eV ولوحظ ان فجوة الطاقة تبدا بالنقصان مع زيادة التشويب بالالمنيوم والنحاس مقارنة مع اغشية CdO النقية . حيث ان فجوة الطاقة عند التشويب بالنحاس كانت تتراوح مابين 2.5 eVالى 2.31 eV وتتراوح مابين 2.62 eV الى 2.48 eV عند التشويب بالالمنيوم.اوضحت نتائج قياس تيار - جهد للكاشف الضوئي ان مقدار عامل المثالية (Ideality factor) للكواشف المحضرة بمولارية وتراكيز اشابة مختلفة يزداد مع زيادة التركيز المولاري وان افضل قيمة له كانت بحدود 1.7 عند تركيز 0.5% وبالنسبة لشوائب النحاس وبحدود 1.8 بالنسبة لشوائب الالمنيوم بتركيز 0.5% .اظهرت نتائج قياسات الاستجابية الطيفية ان الكواشف المصنعة تعمل ضمن المنطقة الطيفية (400 - 850nm) ووجود قمتين لكاشف (CdO/Si) المشوب وغير المشوب الاولى تقع عند الطول الموجي (550 nm) والتي تعود الى غشاء CdO والثانية عند الطول الموجي (800 nm) والتي تعود الى السليكون. لقد اوضحت نتائج الاستجابية الطيفية للضوء الابيض ان الكواشف تمتلك خصائص خطية جيدة ولاوجود لمنطقة اشباع وان هذه الخصائص تحسنت بعد الاشابة.تم حساب الكشفية النوعية للكواشف المصنعة ووجد انها تتغير مع ظروف التحضير حيث ان اعلى قيمة لها كانت بحدود 6*1011(HZ1/2.W - 1.cm) عند الطول الموجي 500nm وبلغت 7*1011(HZ1/2.W - 1.cm) عند الطول الموجي 700nm للكاشف المصنع CdO : Al/Si المشوب بتركيز 5% . | We discussed in this research Manufacturing and study the detector hybrid retail properties type CdO/ P - Si the doping ,If film were prepared the Cadmium Oxide (CdO), by the way chemical spraying with tempratuer the constant base (380oC) And molar concentrations (0.1, 0.15,0.2,0.25)M. It was the doping for two element Copper and Aluminum with percentages (0.5%, 1%, 3%, 5%) on the glass and the slides of Silicon crystallization single from p - type With crystalline directional (100) and Electrical resistivity (2 - 20 Ω .cm) and from N - type With crystalline directional (100) and Electrical resistivity (10 Ω .cm) at thickness between (400 - 600 nm).We study the Characteristics Synthetic and Optical and Electrical the film CdO , by change molar concentrations with tempratuer the constant base (Ts) , I have explained the results X - ray diffraction that film CdO With a cubic crystalline structure And that the highest intensity was at the level of (111), The results showed of optical that value Energy gap the large dependent on molar concentrations , It was found the value Energy gap they were between (2.34 ev - 2.61 ev) and It was found simpel change in Energy gap when the doping by Copper they were between (2.31 ev - 2,51 ev) and Improving Energy gap when the doping by Alminum they were between (2.48 ev - 2.62 ev).The results measure Current - Potential the optical detector there Ideality factor the detector Prepared with tempratuer the constant base and different molar concentrations where the value increases with molar concentrations decreases, and the better value they were limited 1.7 when concentration 0.5% for Impurities Copper , And limited 1.8 for Impurities Alminum when concentration 0.5%.The result measure Responsive spectral the detector Manufacture the work with in Spectral region (400 - 850 nm) , And found two value the detector (CdO/ Si) the doping and undoping , The first located when wevelength (550 nm ), which return to the detector CdO , The second when wevelength (800 nm ), which return to the detector Silicon. It was found the value Specifc Detectvity the showed the better value they were the detector CdO : Al/ Si the doping concentration 5% it was about 6*1011(HZ1/2.W - 1.cm) at the Wavelength (500nm) and 7*1011(HZ1/2.W - 1.cm) at the Wavelength (700nm).I have explained the results Responsive spectral for white light that the detector has liner properties and this properties improving after at dopend.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: العربية
الجامعة: جامعة بغداد
الدرجة: ماجستير
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: سعاد غفوري خليل العاني رائد عبد الوهاب اسماعيل
اسم المؤلف: رفل صالح ساجت فياض

دراسة الخواص البصرية والكهربائية لمتراكبات PMMA/ اكسيد المعادن Study the Optical and Electrical Properties of PMMA/Metal Oxide Composites

المستخلص: يهدف هذا البحث الى تحضير متراكبات ثلاثية هجينة من PMMA مقواة بجسيمات TiO2 - Al2O3 وZrO2 بتقنية الصب .تم استخدام كسور وزنية (84 - 92) wt % من بولي ميثيل ميثا اكريلك ونسبة ثابتة % (4) من تيتانيا مع نسب وزنية تتراوح بين wt % (4 - 12) للالومينا والزركونيوم. تم دراسة المواصفات التركيبية من خلال حيود الاشعة السينية ومجهر القوة الذرية. بينت فحوصات صور مجهر القوة الذرية تجانس في البناء البلوري. اما الخواص العزلية فقد فحصت من خلال قياس ثابت العزل عند مدى تردد (102 - 106) Hz وبينت النتائج ظهور تاثير طفيف عند اضافة الالومينا للمتراكب الهجيني (PMMA - TiO2 - Al2O3) مقارنة بمضاف الزركونيوم للمتراكب الهجيني (PMMA - TiO2 - ZrO2) حيث قيم ثابت العزل تزداد مع زيادة التركيز (3.408500 - 10.69851). في حين يتناقص عامل الفقد بزيادة التردد للمتراكبات (PMMA - TiO2 - Al2O3)و(PMMA - TiO2 - ZrO2) . قيست التوصيلية الكهربائية المستمرة لمدى درجات حرارية تتراوح بين ( 313 - 373 )K ولوحظت زيادة في القيم التوصيلية بزيادة التركيز ودرجة الحرارة (5.5E - 10 - 8.52E - 10) (Ω.m) - 1 في حالة الزركونيوم المضاف للمتراكب الهجيني. تم حساب الثوابت البصرية للعينات المحضرة كدالة للطول الموجي وذلك باستخدام مطياف بمدى nm( - 1100200). حيث تم حساب معامل الامتصاص، معامل الخمود، معامل الانكسار وفجوة الطاقة البصرية, ومن حساب النتائج نلاحظ ان قيم معامل الامتصاص ومعامل الخمود ومعامل الانكسار لل(PMMA - TiO2 - Al2O3) اعلى من (PMMA - TiO2 - ZrO2) كدالة للطول الموجي، نلاحظ ايضا، انخفاض في قيم فجوة الطاقة البصرية المسموحة eV (2.90 - 2.50) في متراكبات الالومينا بينما من (2.90 - 2.58) eV للزركونيوم. وكذالك فجوة الطاقة البصرية الممنوعة (2.85 - 2.48) eV الكترون فولت للالومينا بينما eV (2.85 - 2.52) للزركونوم . | This study aims to synthesize ternary hybrid composites PMMA polymer matrix with TiO2, Al2O3 and ZrO2 as additives using casting technique. the weight fractions of matrix with range (84 - 92) wt %, fixed percentage (4) % of TiO2 and range of weight fractions with range (4 - 12) wt % of Al2O3 and ZrO2 were used as started materials. Characterization properties were examined through XRD and AFM. Obtained micrograph and XRD revealed homogeneity structure for Al2O3 filler. Dielectric properties such as dielectric constant were carried for range (102 - 106) Hz frequency .The addition of Alumina filler exibits slightly effect on dielectric constant values for prepared ternary hybrid composite (PMMA - TiO2 - Al2O3 ) compared with ZrO2 for ternary hybrid composite (PMMA - TiO2 - ZrO2) where dielectric constant increases as concentration increases (3.408500 - 10.69851) . Dissipation factor decreases with increasing frequency in composite (PMMA - TiO2 - Al2O3) and (PMMA - TiO2 - ZrO2). DC electrical conductivity was conducted in temperature range ( 313 - 373 )K. Markedly increasing for the DC electrical conductivity of Zirconia filler with respect to additional concentration (5.5E - 10 - 8.52E - 10) (Ω.m) - 1 .Otherwise DC electrical conductivity increases versus applied temperature for both prepared composites. Optical constants (extinction coefficient, absorption coefficient, and Index of refraction), optical energy gap were obtained for prepared Specimens as function of wavelength using spectrometer at range (200 - 1100)nm. It was noticed that the values of extinction coefficient ,coefficient of absorption , and refractive index for (PMMA - TiO2 - Al2O3) are higher from that of (PMMA - TiO2 - ZrO2) as wavelength, also, more decreasing in allowed optical energy gap values from (2.90 - 2.50 eV) for Al2O3 filler and from (2.90 - 2.58 eV) for ZrO2 as additive. Also forbidden optical energy gap decreases in case Al2O3 from(2.85 - 2.48) eV while from (2.85 - 2.52) for ZrO2 as additive.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: رغد صبحي الخفاجي
اسم المؤلف: رسل طه حسين

دراسة التركيب المتهيج للنوى زوجية - زوجية ذات العدد الذري Z= 50, 48, 46 في المستوى المتهيج الاول Study of Excited Structure for Even - Even Nuclides of Z = 50, 48, 46 in The First Excited State

المستخلص: درست الخواص الكهرومغناطيسية للنظائر زوجية - زوجية للنوى 48Cd , 50Sn و46Pd الغنية بالنيوترونات من خلال قوى الانتقال لرباعي القطب الكهربائي |M(E2)|2 W.u ↓ واحتمالية الانتقال المختزل B(E2)W.u ↓ لانتقال اشعة كاما من المستوى المتهيج الاول الى المستوى الارضي. حيث تم حساب قوى الانتقال لرباعي القطب الكهربائي |M(E2)|2 W.u ↓ بالاستعانة بمعدل العمر للمستوى المتهيج الاول والشدة النسبية لاشعة كاما المنبعثة من ذلك المستوى, بينما قيم احتمالية الانتقال المختزل B(E2)W.u ↓ استخرجت من خلال عمر النصف للمستوى المتهيج الاول المصحح لمعامل التحول الداخلي.وللحصول على قيمة دقيقة لانتقال رباعي القطب الكهربائي ↓ E2, تم حساب ورسم القيم المتبناة لكل من |M(E2)|2 W.u ↓ وB(E2)W.u ↓ كدالة لعدد النيوترونات.في هذا البحث, تم تحويل القيم المتبناة لانتقال ↓E2 الى قيم احتمالية الانتقال المختزل B(E2) ↑ e2b2 والتي افادتنا في دراسة تركيب النوى من حيث الاختلاف في الشكل لان عامل التشوه β تم استخراجه من B(E2) ↑ e2b2, كما ان دراسة تاثير عدد النيوترونات على سلوك كل من B(E2) ↑ e2b2 وβ في المتسلسلات الايزوتونية لنوى 48Cd , 50Sn و46Pd يعطي معلومات جيدة حول التشوه في النوى.تركزت دراستنا على ثلاث انواع مختلفة من النوى, الاول بعدد ذري سحري50 , والثاني بعدد ذري شبه سحري 48, والثالث بعدد ذري بين القشرات المغلقة 46.في نهاية العمل الحالي تم عمل مقارنة جيدة للحسابات الحالية لقيم احتمالية الانتقال المختزل B(E2) ↑ e2b2 وعامل التشوه β مع معظم القيم العملية والنظرية الحديثة. | Electromagnetic properties for even - even nuclides in neutron - rich nuclei such 50Sn, 48Cd and 46Pd have been studied through the electric quadruple transition strength |M(E2)|2 W.u ↓ and the reduced transition probability B(E2)W.u ↓for γ0 - transition from first excited state to the ground state. The electric quadruple transition strength |M(E2)|2 W.u ↓ is calculated by using life - time for excited state with the intensity of γ0 - transition, while B(E2)W.u ↓ is extracted from half - life time to state corrected for internal conversion coefficient. To obtain precise value for the transition of E2↓, the adopted value for |M(E2)|2 W.u ↓ and B(E2)W.u ↓ was calculated and plotted as a function for neutron number. In present work, the adopted values for the transition of E2↓ are converted to B(E2)exp ↑ e2b2 which helped us to study the structure for nucleus, such as the variation in shape, because the deformation parameter β is extracted from B(E2) ↑ e2b2 and the study for behavior of each of B(E2) ↑ e2b2 and β versus neutron number in isotonic chains to 50Sn, 48Cd and 46Pd gives good information about the deformation in nuclei. Our study focused on the three different types of nuclei, the first with atomic magic number 50, the second with semi - magic atomic number 48 and the third nucleus with atomic number between closed shells 46. At the end of the present work, the good comparisons for the present calculation to the values of the B(E2) ↑ e2b2 and β with most recent values of experimental and theoretical was done.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
الموضوع الدقيق: الفيزياء
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: فاطمة عبد الامير جاسم
اسم المؤلف: رسل سعد هادي

تصنيع كواشف ضوئية باستخدام اوكسيد التيتانيوم المطعم باوكسيد الخارصين ذو التركيب النانوي بواسطه تقنية الليزر النبضd Fabrication of photovoltaic detectors using TiO2 doped with ZnO nanostructure by PLD technique

المستخلص: In this work, a Nd : YAG laser beam (λ=1064nm, repetition rate 6 Hz with the pulse duration 10ns) has been used to deposit thin films TiO2 pure and TiO2 doped with ZnO at different concentrations (2%, 5%, 7%) on glass and silicon substrates. The laser fluence is kept at 700 mJ/cm2 and the pressure is kept at 10 - 2 mbar to specify the optimum condition of deposition. TiO2 - ZnO thin films are investigated by using different techniques such as X - Ray Diffraction (XRD), Atomic Force Microscope (AFM), UV - VIS transmittance spectroscopy, Hall Effect and detector properties equipment.X - Ray Diffraction (XRD) results showed that by increasing ZnO concentration and annealing temperature (500°C) TiO2 transformed from amorphous structure to polycrystalline structure. AFM results showed that the RMS and the grain size was increased with increasing the concentration of zinc oxide. The root mean square (RMS) reachs to 15.2 nm at room temperature and after annealing temperature at 500°C reachs to 16.1nm. Also, the grain size increased with increasing ZnO concentration up to (100.12) nm at the concentration 7% after annealing temperature. UV - VIS transmittance measurements show that the transmittance were high in infrared region and decreases with increasing ZnO concentration and after annealing. Hall Effect is studied to estimate the type of carriers. From the results it was deduced that all (TiO2 : ZnO) films were n - type. As a result, it has been found that film structure and properties are dependent on annealing , as well as different concentrations.From the (I - V) measurements by using UV laser diode with a wavelength (385nm) found that the responsivity of the detector increased at concentration 7% reach to (3.39)A/W and after annealing in temperature 500°C reach (3.82)A/W.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: سمر يونس الدباغ
اسم المؤلف: ذرى طارق عباس

دراسة تاثيرات خسارة الانحناءات لليف البصري في منظومة الاتصالات البصرية Study Effects of Optical Fiber Bending Loss in Optical Communication System

المستخلص: في هذا البحث , تم دراسة تاثير الانحناء على انتقال الاشارة الضوئية خلال الالياف البصرية. هذا العمل يتضمن قياسات الخسارة في القدرة خلال الليف البصري بوجود الانحناءات عند عدد لفات مختلفة من (1 - 10) لفة وعند اقطار انحناء مختلفة (12.5 , 10.5 , 8 , 6 , 4 , 3 , 2 , 1) cm. نوعين من الالياف البصرية تم استخدامها , الليف المتعدد الانماط (MMF ) باطوال مختلفة (1 , 20 , 40 , 100 , 120 , 140 ) m وليف احادي النمط بطول (4.5 m) .واستخدم نوعين من الليزرات ليزر دايود الاحمر (λ=650 nm) وليزر دايود اخضر (λ=532 nm).القدرة الضوئية تم قياسها باستخدام جهاز قياس القدرة. تشير النتائج ان كلما قل قطر الانحناء وزادت عدد اللفات فان الخسارة في القدرة الضوئية تزداد. حيث ان القدرة الضوئية لليزر الاخضر عند الطول الموجي (λ=532 nm) تقل من (48.083*10 - 4) mW الى (41.114*10 - 4) mW عند اللفة الاولى لليف متعدد الانماط بطول (40m) عندما تم حني الليف من cm12.5 الىcm 1. اما لليف الاحادي النمط, فان القدرة الخارجة لليزر الاخضر عند طول موجي (λ=532 nm) تقل من (13.608) mW الى (13.32) mW عند اللفة الاولى من طول (4.5) m لليف احادي النمط عندما تم حني الليف من 12.5 cm الى 3 cm . اظهرت النتائج ايضا ان تاثير الانحناء في القدرة الخارجة في حالة الليف المتعدد الانماط اكبر مقارنة بالليف احادي النمط. وكذلك النتائج لهذا البحث تتضمن تصميم وتنفيذ منظومة اتصال الالياف البصرية لفحص تاثير الانحناء على الاشارات المنتقلة خلال الالياف البصرية متعددة الانماط حيث لف من (1 - 10) لفة وعند اقطار انحناء مختلفة ( 1,2,3,4 ) cm . تم تضمين الاشارات باستخدام ليزر nm 532 .الاشارة تم ارسالها خلال ليف متعدد الانماط باطوال مختلفة وهذه الاشارة تم الكشف عنها باستخدام كاشف السليكون الضوئي (AEPX 65) . وجد ان الانحناءات تؤدي الى تغييرات واضحة في سعة ( جهد ) الاشارة الخارجه ؛ حيث يقل الجهد من 0.64volt الى 0.52 volt عند زيادة عدد اللفات من) 1 - (10 لفة في ليف بطول 40m وقطر الانحناء (1) cm.ويقل الجهد الى حد 0.2 volt في ليف بطول 140m وقطر الانحناء (1) cm.واخيرا الاشارات المنتقلة فيمنظومة الياف بصرية باستخدام كاميرا (CCD) واستخدام حاسبة شخصية معUSB TV STICK لرؤية تاثير الانحناء على انتقال الاشارات خلال الالياف البصرية. حيث ان الاشارة الخارجة ستقل من 0.68 volt الى 0.6 volt عندما عدد اللفات تزداد من (1 - 5) لفة في ليف بطول (1) m .اجرى احتساب كل من نسبة الاشارة الى الضوضاء ومعدل الخطا في نقل البيانات في للاشارات المنتقلة في منظومة الاتصالات عند اقصى طول لليف البصري 140m وعند اللفة 10 فكانت 115.147dB و3.68x10 - 27 على التوالي . بينما نسبة الاشارة الى الضوضاءSNR ومعدل الخطاBER في نقل البيانات في الاشارات المنتقلة باستخدام كاميرا CCD عند طول الليف البصري 1m وعند اللفة 10 فكانت 100.49dB و5.98x1o - 24 على التوالي .. اظهرت النتائج ايضا ان نسبة الاشارة الى الضوضاء تقل ومعدل الخطا في نقل البيانات يزداد بزيادة عدد اللفات في كلا المنظومتين | In this work, bending loss effects of optical fiber on the transmitted signal were studied.This work includes measurements of the power loss through optical fiber with the presence of bends at different wrapping turns (1 - 10) turns and at various bending diameters (12.5, 10.5, 8, 6, 4, 3, 2, and 1) cm. Two types of optical fibers were used, multimode optical fiber (MMF) of different lengths (1, 20, 40, 100, 120, 140) m and a single mode optical fiber (SMF) of length (4.5 m). Two optical sources were used, Red laser diode (λ=650 nm) and green laser diode (λ=532 nm). The output power was measured using an optical power meter. Results indicated that as the bending diameter decreased and the number of wrapping turns increased, the power loss increased. The output power of green laser diode at (λ=532 nm) decreased from (48.083*10 - 4) mW to (41.114*10 - 4) mW at the first turn of 40m MM fiber length when bent from (12.5 to 1) cm. For SMF, the output power of green laser diode at (λ=532 nm) decreased from (13.608) mW to (13.32) mW at first turn of (4.5) m SM fiber length when bent from (12.5 to 3) cm. The higher alteration output power in the case of multimode fiber has been deduced as compared with that of the single mode fiber. Also the results of the project involves a design and an implementation optical fiber communication system to investigate the effect of bending on the transmitted signals through multimode optical fiber wrapped (1 - 10) turns and at different diameters (1, 2, 3, 4) cm . Signals were modulated using 532nm laser diode then sent through multimode fiber of different lengths and detected by silicon photo detector (AEPX 65). The bending induces changes in the amplitude (voltage) of the output signal, the output voltage decreased from 0.64 volt to 0.52 volt when the no. of turns increased from 1 - 10 turns for 40 m optical fiber at a bending diameter of (1cm) and decreased to 0.2 volt for 140m multimode fiber at a bending diameter of (1cm).Finally, a transmitted signal in optical communication system has been built using CCD camera and Pc with USB TV STICK for monitory the effect of bending on signals that transmitted through optical fibers. The output transmitted signals decreased from 0.68 volt to 0.6 volt when the no. of turns increased from 1 - 5 turns for 1 m optical fiber. The calculations of signal to noise ratio (SNR) and Bit Error Rate (BER) for transmitted signals in optical communication system at maximum fiber length of 140m and 10turns are equal to 115.147dB and 3.68x10 - 27 respectively. While for transmitted signal form CCD camera at fiber length 1m and of 10 turns are equal to 100.49dB and 5.98x1o - 24 respectively.Results show that SNR decreased and BER increased as no. of wrapping turns increased for both systems.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
الموضوع الدقيق: الفيزياء
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: سمر يونس الدباغ
اسم المؤلف: دعاء هشام محمد

الخواص الالكترونية لمادة هجينة مركب ثلاثي - خماسي/كرافين : حسابات نظرية دالية الكثافة Electronic Properties of III - V Compound / Graphene Hetero Material : Density Functional Theory Calculations

المستخلص: هذه الاطروحة هي دراسة نظرية للخصائص التركيبة والالكترونية لمجموعتين من اوراق الجرافين. وتضمنت المجموعة الاولى ثلاثة اوراق جرافين نقية ذات اطوال مختلفة GR1 ˃ GR2 ˃ GR3، وتمثل المجموعة الثانية ثلاثة اوراق متغايرة من جرافين - مركبات B/P والتي تم بنائها اعتمادا على GR1. تم تنفيذ العمليات الحسابية باستخدام تقريب الكثافة الموضعي / LDA / SZ لنظرية دالية الكثافة. وقد استخدم برنامج Gauss View 5.0.8 لتصميم تراكيب اوراق الجرافين النقية والمشوبة. في البداية، تمت عملية استرخاء هذه التراكيب عن طريق استخدام طريقة PM6 شبه التجريبية مع الدالة الهجينة B3LYP - DFT عند حزمة من برامج Gaussian 09 وبعدها تمت عمليه استرخاء التراكيب باستعمال برنامج SIESTA trunk - 462 من خلال تطبيق نظرية دالية الكثافة LDA / SZ. يلاحظ من نتائج الخصائص التركيبية لاوراق الكرافين المدروسة ان هناك استرخاء جيد لهذه التراكيب، تبقى قيم الاواصر في اوراق الكرافين النقية C - C، C⚍C وC - H في نفس المديات لتراكيب حلقات الكربون. كذلك، ان اضافة مركباتB / P في ورقة الجرافين النقية لبناء اوراق الجرافين المتغايرة لم يؤثر على الخصائص التركيبة للتركيب الاصلي . وان الالتواء الملاحظ في حلقات الفينيل في مناطق الاتصال مع الحلقات المطعمة ياتي من زوايا الالتواء بين ذرات مختلفة بسبب اختلاف الكتلة الذرية والكهروسالبية لذرات B، P وC. تم استخدام نظرية دالية الكثافة LDA / SZ في برنامجGollum لحسابات الخصائص الالكترونية لمجموعتي اوراق الجرافين. ان نتيجة الطاقة الكلية لاوراق الجرافين المدروسة هو انعكاس لطاقة الربط لكل تركيب وتشير الى ان هذه التراكيب تمتلك استرخاء جيد ، وتاثير اضافة ذراتB وذرات P في ورقة الجرافين النقية GR1 كان له دور فعال على الطاقة الكلية للجزيئة. نبين ان كل اوراق الجرافين لها موصلية عالية وفجوة طاقة ممنوعة صغيرة، لكنها تتذبذب تبعا لطول وشكل كل ورقة وعدد وموضع ذرات B وP في الورقة. واظهرت القيم المحسوبة لطاقة فيرمي EF بان قيم EF لاوراق الجرافين النقية تتزايد مع تناقص طول الورقة. وباضافة ذرات B وP باشكال وهيئات مختلفة في GR1 سوف يغير من موقع مستوى فيرمي، ان كافة الاوراق المطعمة لها EF اكبر تقريبا من GR1. وياتي ذلك من اضافة مركبات B / P في GR1 الذي اعطى للورقة خصائص الكترونية جديدة.ان طاقة التاين IE والالفة الالكترونية EA لاوراق الجرافين النقية تنخفض قليلا مع تناقص طول الورقة. وكافة اوراق الجرافين المطعمة لها قيم منخفضة من IE وEA بالمقارنة مع GR1 النقي. ايضا، تظهر نتائجنا ان جميع اوراق الجرافين النقية والمطعمة تمتلك صلادة كهروكيميائية H عالية ومرونة الكترونية S عالية . المرونة الالكترونية العالية ستفتح افاق مستقبليه كاشارة لفجوة حزمة للتركيب مما يجعله يكون مرنا نوعا ما ، ان الكهروسالبية X قد انخفضت مع تناقص طول اوراق الجرافين النقية ، وX لاوراق الجرافين المطعمة هو اقل منها لورقةGR1 ، وهذا يعني ان الالكترونات في هذه الاوراق المطعمة لديها ميل كبير للهروب.واظهرت النتائج ان التوصيليات الكهربائية والحرارية لاوراق الجرافين النقية تكون في الترتيب GR1 ˃ GR3 ˃ GR2 ، التوصيلة الكهربائية والتوصيلة الحرارية لاكبر ورقة تكون هي القيم العليا، وهذا يرجع الى ان GR1 لديه قنوات متعددة لنقل الالكترون، من ناحية اخرى، القيم العليا لفجوة الطاقة خفضت التوصيلة الكهربائية والتوصيلة الحرارية. في حين، ان التوصيلة الكهربائية، وبالتالي ,التوصيلة الحرارية لاوراق الجرافين المطعمة كانت في الترتيب GR6 ˃ GR5 ˃ GR4، وبزيادة عدد ذرات B وP في الورقة انخفضت التوصيليات الكهربائية والحرارية. في جميع الحالات ، ان GR1 النقي لديه قيم توصيلية كهربائية وحرارية اعلى من تلك التي للاوراق المطعمة .ان النتيجة القيمة للغاية تم الحصول عليها من خصائص I - V للتراكيب المدروسة حيث ان سلوك التحسس قلل تماما من تاثيرات درجة الحرارة العالية التي تظهر في الاجهزة الكبيرة القديمة. وتشير حسابات I - V ان التفاعل المناسب مع الاقطاب يكون تاثيره محدودا الى حد ما على سلوك التحسس لاوراق الجرافين النقية والمطعمة. ان نتائج التحسس نتجت من تقليل فجوة الطاقة بين HOMO للورقة ومستوى فيرمي لقطب الذهب في الحيز الامامي والعكسي . ومن نتائج معامل Seebeck، يظهر لنا مساهمة متماثلة لتراكيز الالكترونات والفجوات حول منطقة الطاقة، وقد تبين ان الورقة الاكبر GR1 تملك القيمة الاقصى لمعامل Seebeck . وقد لوحظ ان معاملات الانتقال لاوراق الجرافين النقية تحدث على طول مدى واسع من طاقة الالكترون لانها لا تحوي منطقة استطارة. ايضا، ان الورقة مع عدد قليل من ذرات B وP كالحلقة النقطية في منتصف الورقة GR6 لها قيمة عالية من معامل الانتقال ، وهذا بسبب العدد الكبير من القنوات المفتوحة. وبشكل عام، معامل الانتقال للاوراق المدروسة لديها مدى واسع على نطاق الطاقة | This thesis is a theoretical study of structural and electronic properties of two groups of graphene sheets. The first group included three pure graphene sheets of different lengths GR1 ˃ GR2 ˃ GR3, and the second group represents the three sheets of heterojunction graphene - B/P compounds which were constructed on the basis of GR1.The calculations are carried out using the Local Density Approximation/Single Zeta LDA/SZ density functional theory. Gauss View 5.0.8 program was used to design the structures of pure and doped graphene sheets.Initially, these structures are relaxed by employing the PM6 semi - empirical method with the hybrid functional B3LYP - DFT at Gaussian 09 program package , and then they are relaxed at SIESTA - trunk - 462 of program by employing the LDA/SZ density functional theory. The results of the structural properties of the studied graphene sheets showed that there is good relaxation of the structures, the values of C - C, C⚍C and C - H bonds in pure graphene sheets remain in the same ranges of the carbon rings structures. So, the addition of B/P compound in pure graphene sheet to construct the heterojunction graphene sheets has no effect on the structural properties of the original structure. The screw observed in phenyl rings at the contact regions with the doped rings comes from the twist angles between different atoms due to the difference of the atomic mass and electronegativity of B, P and C atoms. The LDA/SZ density functional theory at the Gollum program was used for the calculations of the electronic properties of the two groups of graphene sheets. The result of the total energy of the studied graphene sheets is a reflection of the binding energy of each structure and indicates that these structures have good relaxation, and the effect of adding B and P atoms in pure graphene sheet GR1on the total energy of the molecule is effective. We showed all graphene sheets have high conductivity and small forbidden energy gap, but it vibrates depending on the length and shape of each sheet and the number and position of B and P atoms in the sheet. The calculated values of Fermi energy EF showed that the EF values of pure graphene sheets increase with decreasing the length of the sheet. Adding the B and P atoms in various shapes and forms in GR1 changes the position of Fermi level, all the doped sheets have EF approximately greater than that for GR1. This comes from the addition of B/P compound in GR1which gave the sheet new electronic properties. The ionization energy IE and electron affinity EA of the pure graphene sheets slightly decrease with decreasing the length of the sheet. And all doped graphene sheets have low values of IE and EA in comparison with the pure GR1. Also, we showed that all the pure and doped graphene sheets have low electrochemical hardness H and high electronic softness S. High electronic softness will pave the way for future prospects as a sign for that band gap of the structure wich becomes rather soft, the electronegativity X was decreased with decreasing the length of the pure graphene sheets, and the X of the doped graphene sheets is less than that for GR1, that means the electrons in these doped sheets have a large escaping tendency. The results showed that the electrical and thermal conductivities of the pure graphene sheets are in the order of GR1 ˃ GR3 ˃ GR2, the electrical conductivity and the thermal conductivity of the largest sheet are the higher values, this is due to the fact that GR1 has multi channels of electron transfer,and on the other hand, the higher the value of the energy gap,it decreased the electrical conductivity and the thermal conductivity. While, the electrical conductivity and therefore, the thermal conductivity of the doped graphene sheets are in the order of GR6 ˃ GR5 ˃ GR4,and by increasing the number of B and P atoms in the sheet, the electrical and thermal conductivities decreased. In all cases, the pure GR1 has values of electrical conductivity and thermal conductivity higher than those for the doped sheets. A very valuable result was obtained from I - V characteristics of the studied structures, in which the sensing behavior completely reduces the high temperature effects that appear in the old macro devices. The I - V calculations suggest that the suitable interaction with the electrodes have a rather limited influence on the sensing behavior of the pure and doped graphene sheets . The sensing results from the lowering of the energy gap between the HOMO of the sheet and the Fermi level of the gold electrode in the forward and reverse bias. From the results of the seebeck coefficient, we showed symmetrical contribution of electrons and holes concentrations around the region of the energy, it is found that the largest GR1 has the maximum value of seebeck coefficient. The transmission coefficients observed for the pure graphene sheets take place along a wide range of electron energy because they have not got a scattering region. Also, the sheet with small number of B and P atoms as a dot doped ring in the middle of the sheet GR6 has high value of transmission coefficient, this is due to high number of open channels. In general, the transmission coefficient of the studied sheets has a wide range on energy scale
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
الموضوع الدقيق: فيزياء الالكترونيات
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: حامد ابراهيم عبود محمد التميمي صباح نوري مزهر
اسم المؤلف: حوراء علي عبد الرضا

تحضير ودراسة سلوكيات الرص لمتراكبات (الومينا - المنيوم) Preparation & Studying the Compaction Behaviors of the (Alumina - Aluminum) Composite

المستخلص: تم تحضير المتراكب السيرميتي (سيراميك - معدن) من مادة الالومينا (Al2O3 - γ( كمادة اساس، ومن معدن الالمنيوم (Al) كمادة تدعيم، لتراكيز مختلفة من الالمنيوم (0 - 50)%، ونسبة زيادة التدعيم 10)%).تمت عملية التشكيل باستعمال الضغط باتجاه واحد، وانجزت عملية التلبيد في جو مفرغ من الهواء. درست سلوكيات الرص بحالة التلبيد الصلبة عند درجات حرارة التلبيد (400، 450، 550) م° ، وازمان التلبيد (2، 4، 6) ساعات، وعند ضغوط تشكيل (50، 100، 150) بار، تم الحصول على افضل الخواص الفيزيائية عند (550م°، 2ساعات، 150ساعة). تمت دراسة حالة تلبيد الطور السائل كدالة لتغير نسبة الالمنيوم في المتراكب عند (800م°، 2ساعة، 150بار)، بناء على ما تم التوصل اليه من خواص فيزيائية جيدة عند حالة التلبيد بالطور السائل، اختيرت هذه المواصفات لدراسة تاثير تغير الضغط عند (50، 100، 150) بار على الخواص الفيزيائية للمتراكبات السيرميتية المحضرة. اظهرت السلوكية عند المنطقة التي تحتوي تركيز الالمنيوم (40 - 50)% افضل الخصائص الفيزيائية، تبعا لذلك، درست اغلب القياسات على التركيز صاحب نسبة 50% من مادة الالمنيوم. المفهوم الاساسي الذي تضمنته هذه الدراسة هو التلاصق الفيزيائي بين مكونات المتراكب السيرميتي المحضر، والذي كان واضح من فحص انحراف الاشعة السينية. كذلك من الفحص المجهري (SEM) نلاحظ ان المتراكب النهائي (السيرميتي) المحضر اشبه الى ما يكون جزر موصلة (مادة الالمنيوم) مفصولة بمناطق عازلة (مادة الالومينا) وهذا ناتج بفعل التلاصق الفيزيائي. لوحظ ان زيادة نسبة الالمنيوم للمتراكبات المحضرة يلعب دورا مهما في الخواص الفيزيائية والكهربائية والتي تم مناقشتها بالتفصيل، وكذلك حسن من قيمة الصلادة للمتراكبات المحضرة، حيث ان التوزيع العشوائي لدقائق الالمنيوم ضمن مادة الالومينا، كون اقرب الى ما يكون الى شبكة داخلية معدنية زادت من متانة المتراكب المحضر من خلال ملء المسامات الموجودة غالبا بسبب مادة الالومينا الهشة. من خلال هذه الدراسة توصلنا الى ان المتراكب المحضر له نسبة مسامية عالية والتي يمكن توظيفها في صناعة فلترات الوقود. كما يمكن توظيف الخواص العزلية المحسنة التي توصلنا اليها في صناعة المتسعات السيرميتية (cermet capacitors )، كذلك من خواص مقاومة البلى التي توصلنا اليها، ممكن توظيفها في تصنيع ادوات القطع والبرد بعد اجراء التحسينات اللازمة. | A cermet (ceramic - metal) composite have been prepared from alumina ceramic (γ - Al2O3) as a matrix and from aluminum metal (Al) as reinforcement, prepared for different concentrations of aluminum (0 - 50)%, the reinforcing increment is (10%).The forming process was done by single action pressing, and the sintering process was done in vacuum atmosphere.The compaction behaviors of prepared cermet bodies were studied in solid state sintering, at sintering temperatures (400, 450, 550) °C, sintering times (2, 4, 6) hrs. and forming pressures (50, 100, 150) bar, the best physical properties were gained at (550 °C, 2hrs., 150bar).Liquid phase sintering process was studied as a function of Al percent in the composite at (800 °C, 2 hrs., 150 bar). According to the interesting physical properties we gained from liquid phase sintering process, these parameters were chosen to study the effect of the forming pressure ((50, 100, 150) bar) on the physical properties of the prepared cermet bodies. The behavior at the region that have aluminum concentration (40 - 50)% showed the best physical properties, according to this, most of the measurements were studied on the concentration of 50% of aluminum material. The basic concept of this study is the physical adhesion between the material particles of the prepared cermet bodies, which was obvious from the XRD tests. Also from the SEM micrograph we have notice the final structure of the prepared cermet, which is more like conducting islands (aluminum) separated by isolated areas (alumina), which is a sequent of the physical adhesion action.Increasing of aluminum content in the composite materials prepared may play an important role in physical and electrical properties has been discussed in detail, also enhanced the hardness of the samples, where the random distribution of aluminum particles through the alumina material, makes more like internal web of metal, that helps to increase toughness of samples by filling the porosities existed because of the brittle alumina.From this study we noticed, we have relative high porosity that could be employed in fuel filters. Also we have fine dielectric properties that could inter the application of cermet capacitors. Also, we have reasonable wear result that can be employed in grinding and cutting tools after improvements have been done.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: عبد الحميد رحيم مهدي الصراف
اسم المؤلف: حنان جميل مصطفى

قياس النشاط الاشعاعي في نماذج بايولوجية باستخدام كاشف الاثر النووي CR - 39 Radioactivity Measurement in Biological Samples Using Nuclear Track Detectors CR - 39

المستخلص: تضمنت هذه الدراسـه قياس تراكيز اليورانيوم في نماذج بايولوجيه مختارة من جسم الانسان ودمه , باستخدام تقنية التنشيط النيوتروني (النيوترونات الحراريه) المنبعثه من المصدر النيوتروني (241Am - 9Be) بسيل نيوتروني مقداره ((1.8 x1011 n/cm2, وتقنية عد اثار شظايا الانشطار النووي باستخدام كاشف الاثر النووي للحاله الصلبه CR - 39) ). تم جمع خمسون نموذج بايولوجي من محافظتي (بغداد وميسان ) اذ شملت هذه النماذج (نماذج الدم الغير مسرطن ونماذج الدم المسرطن من نوع سرطان الدم النخاعي المزمن ), وشملت الانسجه البشرية جهازين من جسم الانسان هما الجهاز الهضمي (المعده,الامعاء الدقيقه, الكبد, القالون,المراره, البنكرياس والاثنى عشر). والجهاز البولي (الكلى ,الحالب والمثانه) وتضمنت هذه الانسجه حالتين مرضيتين هما الاورام الحميده والخبيثه.شععت النماذج التي تم الحصول عليها بعد تحضيرها لمدة (7) ايام بالنيوترونات الحراريه المنبعثه من المصدر النيوتروني ذو الفعاليه (12 Ci) وبفيض نيتروني (5x105n.cm - 2.s - 1) وذلك لاجل شطر اليورانيوم الموجود في النماذج وتسجيل اثار شظايا الانشطار على الكاشف.درست ازمنه مختلفه لقشط هذه الكواشف لاجل الوصول الى الزمن الامثل للقشط باستخدام الحمام المائي حيث تم اختيار المحلول الكيميائي القاشط NaOH)) بعياريه6.25N)) ودرجة حراره (70 Co) وتبين ان الزمن 70 min)) افضل زمن قشط للكواشف التابعه لنماذج الدم والزمن (90min) افضل زمن قشط للكواشف التابعه لنماذج الانسجه البشريه .بينت هذه الدراسة ان اعلى قيمة تركيزلليورانيوم وجدت في نماذج الدم غيرمسرطنه (ppm 0.146) واقل قيمه (ppm 0.078) وبمعدل (0.107ppm) وفي نماذج الدم المصابه اعلى قيمه كانت (0.121 ppm) واقل قيمه تركيز (0.045 ppm) وبمعدل (0.085 ppm) اما في نماذج الانسجة البشريه اعلى قيمة تركيز لليورانيوم في الجهاز الهضمي بلغ (ppm 0.068) واقل قيمه (0.022 ppm) وبمعدل تركيز (0.044ppm ) وفي الجهاز البولي اعلى قيمه كانت (ppm 0.06) واقل قيمه كانت (ppm 0.023) وبمعدل تركيز(0.047 ppm) | This study involvement the measurement of uranium concentrations in biological samples selected from Human body and its blod using neutron activation technique (thermal neutrons) emitted from the neutron source (241Am - 9Be) with neutron flounce (1.8 x1011 n / cm2), using technique of the nuclear fission fragments in solid state Nuclear track detector (CR - 39) Fifty biological samples were collected from two governorates (Baghdad and Maysan) , included blood samples ( Normal and Leukemic type CML) and tissues samples of digestive system (Liver, Small intestine, Stomach, Gallbladder, Colon, Pancreas and Duodenum) and urinary system(Bladder, Kidney and Ureter) were this included two types of disease (Benign tumors and malignant tumors ) All samples are irradiation After preparation for (7) days to thermal neutrons emitted from the neutron source with activity (12Ci) and neutrons flux(5x105n.cm - 2.s - 1) fission fragments in the samples and recorded tracks on detector.Studied different etching times of these detectors and to reach optimized time by using the water bath for etching where Choose chemical solution (NaOH) with (6.25N) and a temperature (70oC) , and show that the time (70 min) the best etching time of the detectors affiliated to the blood samples and time (90min) the best etching time to detectors affiliated to the human tissues samples.This study showed that the highest value of the concentration of uranium in Normal blood samples (0.146ppm) and the lowest value (0.078ppm) with average (0.107ppm) and in Leukemia blood samples the highest value (0.121 ppm) and the lowest value (0.045 ppm) with average (0.085 ppm), but in the tissue samples the highest value of the concentration of uranium in the digestive system(0.068 ppm) and the lowest value(0.022 ppm) with average (0.044ppm) and in the urinary system the highest value( 0.06 ppm) and the lowest value (0.023 ppm) with average (0.047 ppm).
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: العربية
الدرجة: ماجستير
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: نضالة حسن كاظم العاني
اسم المؤلف: هدية حاتم نصيف

قياس تراكيز اليورانيوم والرادون في تربة بعض مناطق جنوب شرق بغداد باستخدام كاشف CR - 39 Measurment of Uranium and Radon Concentrations in Soil of Some Regions in South East of Baghdad Using Nuclear Track Detector(CR - 39

المستخلص: اجريت هذه الدراسة لتحديد تراكيز اليورانيوم وغاز الرادون في تربة بعض مناطق جنوب شرق بغداد (التويثة وعشتار والوردية وفلكة المدائن وجسر ديالى والرياض وسلمان باك ) .استعملت (35) عينة ترابية اخذت من (7) مناطق وبواقع خمسة اعماق لكل منطقة (سطح التربة,10cm, 20cm,30cm,40cm) للتعرف على مدى تلوث تلك المناطق باليورانيوم جراء العبث بالمصادر المشعة التابعة لمنظمة الطاقة الذرية بعد احداث الحرب على العراق عام ((2003 .تضمن الجزء الاول ايجاد تراكيز اليورانيوم في التربة باستخدام تقنية عد اثار شظايا الانشطار في كاشف الاثر النووي (CR - 39) الناتجة من قصف نوى اليورانيوم بالنيوترونات الحرارية من المصدر النيوتروني (Am241 - Be ) بفيض نيوتروني بلغ (5x103n.cm - 2.s - 1), اما الجزء الثاني فقد تضمن ايجاد تراكيز غاز الرادون في التربة باستخدام تقنية عد اثار جسيمات الفا المنبعثة من غاز الرادون في كاشف الاثر النووي (CR - 39). حددت تراكيز اليورانيوم وغاز الرادون بطريقة المقارنة مع النماذج القياسية ومن خلال النتائج المستحصلة نجد ان تراكيز اليورانيوم في عينات الترب كانت كالاتي : التويثة ppm (0.881±0.086),الوردية ppm(0.850±0.077) ,فلكة المدائن ppm(0.762±0.085) ,جسرديالى ppm(0.604±0.037),عشتار ppm(0.557±0.103) , الرياض ppm(0.465±0.171) ,سلمان باكppm (0.441±0.036) وقد بلغ معدل تركيز اليورانيوم لجميع المناطق ppm(0.651±0.180) .اما معدل تركيز غاز الرادون في عينات الترب لمنطقة الدراسة كانت كالاتي : التويثة Bq/m3(84.565±18.889),الورديةBq/m3(78.648±16.363),جسرديالى72.238±17.227) Bq/m3),عشتار Bq/m3 ((68.268±16.306, فلكة المدائن Bq/m3 (63.934±12.685), الرياض Bq/m3(59.097±10.777),سلمان باك Bq/m3(56.113±11.931) وبلغ معدل تركيز الرادون لجميع المناطق Bq/m3 ((68.980±10.297 اجري في هذه الدراسة ايضا تحديد معدلات الانبعاث السطحي والكتلي لغاز الرادون وقد اظهرت النتائج الحالية ان المعدلات العامة للانبعاث السطحي والكتلي لجميع مناطق الدراسة Bq/m2.hr(0.072±0.011) Bq/kg.hr(0.011±0.001) على التوالي . يلاحظ من خلال النتائج التي تم الحصول عليها ان تراكيز اليورانيوم والرادون في منطقة التويثة اعلى من بقية المناطق . | This study was done for measuring the concentrationsof (Uranium and Radon gas) in soil samples taken from South - East Baghdad(AL - Twitha, AL - Wardia, Madain Square, Jeser Diala , Ishtar , Hiay AL - Ryaid and Salman pak) .(35) soil samples are taken from (7) locations with five depths ranged from (soil surface ,10cm,20cm,30cm,40cm) to determine the level of concentration of these areas with Uranium .This contamination was due to the mis handeled of the radioactive sources of the Atomic Energy organization after the war Iraq in (2003).The first part consists the determination of Uranium concentration in soil samples using fission tracks registration in (CR - 39) detector obtained by the bombardment of (U) with thermal neutrons from (241AM - Be) neutron source has flux of 5x103n.cm - 2.s - 1 The second part concerns with the determination of Radon concentration in soil by using alpha - emitters registration wich emit from Radon gas in (CR - 39) detecor .The concentration values were calculated by comparison with standard Sample. The results showed that the concentrations of Uranium in study regions from South - East Baghdad were as the following : AL - Twitha (0.881)ppm , AL - Wardia (0.850)ppm , Madain Square (0.762) ppm ,Jeser Diala(0.604) ppm, Ishtar (0.557) ppm , Hiay AL - Ryaid (0.465) ppm ,Salman pak(0.441) ppm, the average of Uranium concentration in study regions(0.651±0.180) ppm . The Radon gas concentrations in study regions from South - East Baghdad were as the following : AL - Twitha (84.565) Bq/m3 ,AL - Wardia (78.648) Bq/m3 , Jeser Diala (72.238) Bq/m3, Ishar (68.268) Bq/m3 , Madain Square (63.934) Bq/m3,HiayAL - Ryaid(59.097)Bq/m3,Salman - pak (56.113)Bq/m3 The average Radon gas concentration (68.980±10.297)Bq/m3 .The results of the current study showed that the surface exhalation and mass exhalation rates of Radon gas in study regions(0.072±0.011) Bq/m2.hr (0.011±0.001)Bq/kg.hr respectively. This work shows the Uranium and Radon concentration in AL - Twitha is higher than the other regions
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: العربية
الدرجة: ماجستير
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: نضالة حسن كاظم العاني
اسم المؤلف: حلا محمد حمزة

تحضير تراكيب نانوية للزنك اوكسيد بطريقه السول - جيل

المستخلص: تم في هذا البحث دراسة الخصائص التركيبية ,البصرية ,الكهربائية والتحسسية للاغشية (ZnO) النقية والمشوبة بالسيريوم (Ce) بالنسب % (3,5,10) المحضرة بطريقة السول - جيل, والتي رسبت بطريقه السبن كوتنك على قواعد زجاجية وملدنه عند درجات الحراره (350,500,550˚C) للاغشيه النقيه و(˚C550 ) للاغشيه المشوبه وبسمك (315.5)nm.بينت فحوصات نمط الحيود للاشعة السينية (XRD) لتشخيص طبيعة تبلور الاغشية المحضرة, حيث اظهرت النتائج ان جميع الاغشية المحضرة ذات تركيب متعدد التبلور من نوع سداسي hexagonal)), كما تبين من نتائج التشويب ان زيادة التشويب تؤدي الى النقصان في الحجم الحبيبي حيث تناقص الحجم الحبيبي من (37.1) الى (27.0) في حالة التشويب بنسبة ,10%, ومن خلال قياسات ماسح القوة الذرية AFM تبين ان خشونه السطح تزداد بزياده نسب التشويب من القيمه (1.14) الى القيمه 2.15)) عند النسبه 10 % ,ومن قياسات المجهرالالكتروني الماسح SEM تم التعرف على نوع التراكيب ففي الاغشيه النقيه ظهرت التراكيب ذات جسيمات نانويه كرويه الشكل موزعه بصوره منتظمة ومتجانسة ,بينما الاغشيه المشوبه كانت التراكيب الناتجه شبيه بالالياف وعلى شكل شبكه تجاعيد (متغصن ). وقد تم دراسة الخواص البصرية لاغشية اوكسيد الزنك النقية (ZnO) والمشوبة بالسيريوم (ZnO : Ce) على دراسة طيف النفاذيه (T᷊) لاغشية المحضرة حيث بينت النتائج ان اعلى نفاذيه تم الحصول عليها هي(95%) عند الاغشية النقيه بينما كانت النفاذيه للاغشية المشوبة %(65 - 40) ولمدى اطوال موجيه350 - 900) nm.) , وتبين ايضا ان الامتصاصية بشكل عام تزداد بزيادة نسب التشويب لتصل اعلى قيمة عند النسبه10% بزيادة نسبة التشويب. تم حساب فجوات الطاقة البصرية للاغشية النقيه والمشوبه وتبين ان فجوة الطاقة تزداد قليل بزيادة نسبة التشويب الى ان تصل الى اعلى قيمة عند نسبة التشويب (10%). وكانت فجوة الطاقة ( (Eg تتراوح من (3.219 eV) الى (3.232eV) بزيادة نسب التشويب. اظهرت القياسات الكهربائية ان التوصيلية الكهربائية المستمرة تزداد بزيادة نسبة التشويب ثم تقل عند النسبه 10 % مع زيادة نسبة التشويب . وبينت القياسات ان الاغشية كافة تمتلك طاقتين للتنشيط (Ea1) و(Ea2) تقل قيمتهما بزيادة نسبة التشويب. كما بينت خصائص(photoconductivity) ان الاغشيه تمتلك ربحيه مقدارها (2.357) للاغشيه النقيه و(1,1.666,1)للاغشيه المشوبه عند النسب (3,5,10 )%على التوالي . اما خصائص التحسسية لجميع الاغشية المحضره كانت تقاس بعد تعريضها الى ( (100,150,200 ppm) من ال( NH₃و( NO₂ عند درجه حراره الغرفه . النتائج العملية بينت ان اغشية اوكسيد الزنك المشوبة بالسيريوم والمرسبة على قواعد زجاجية تحسن التحسسية لتلك الاغشية للغاز ( NH₃و ( NO₂ كما تبين ان افضل نتيجة سجلت كانت للاغشية المشوبة بنسبة 10 % حيث كانت (17%) للغاز NO₂ و(16.66%)للغاز NH₃عند 300 درجه مئويه في حين كانت افضل نتيجه للاغشيه المشوبه بنسبه (%3 و%5) حيث كانت (12.6 %) للغازNO₂ و(10.31%) للغاز ,NH₃ 14%)) للغاز NO₂ و(13.28 %) للغاز NH₃ على التوالي عند 200 درجه مئويه . بالاضافة الى ذلك تبين ان التحسسية لها علاقة نسبية لدرجات الحرارة وكمية الغاز. | In the present work, structural, optical, electrical and sensing properties have been studied for undoped and Ce doped zinc oxide (ZnO) thin films with different cerium doping concentrations (3 ,5 and 10) % prepared by a Sol - gel method with spin coating , deposited on glass substrate at annealing temperature (350,500 and 550 )˚C for the pure thin film , 550 ˚C for doped thin film with (350±10) nm thickness, The X - ray diffraction technique has showed that all prepared films are polycrystalline structure type of hexagonal wurtzite, The doping resulted in decreasing grain size deteriorates the crystalline of the films from (37.1nm) of pure ZnO to (27nm) of ZnO : Ce at (10 %) doped. Surface analysis by AFM have been, the roughness increased with increasing the cerium concentration in the films from (1.14) to (2.15) at 10 % , From FE - SEM have been identified the structures in the thin film pure, spherical nanoparticles distributed a regular basis and homogeneous, while doped thin film were shapes like fiber and a wrinkle network. The measurements of optical properties transmittance of undoped and Ce doped ZnO films showed higher transmittance was (95%) for undoped ZnO films while (65 - 40% ) for doped Ce films within wavelength range (350 - 900nm). In addition, the results have showed the absorbance increased with increased doping to reach maximum value at 10% concentration. The energy gap of ZnO was calculated for undoped and doped films .It is noticed that the energy gap increases slowly with the increased of doping until it reaches the highest value at 10% doping concentration , and the energy gap ranging from (3.219) to (3.232) with increased doping concentration.The results of electrical properties have showed that direct current (D.C) conductivity increases then decreases by increasing doping to reach maximum value at 10% doping concentration. The results have showed that the films have two activation energy Ea₁ and Ea₂. From (photoconductivity) characteristics it has found that the gain factor (2.357) for pure ZnO and (1, 1.666, 1) for ZnO : Ce at (3, 5 and 10) % Respectively.The sensing properties for all undoped and Ce doped films were measured after films surface was exposed to (100,150 and 200) ppm for NH₃, NO₂ gas at room temperature. The experimental results of Ce doping of zinc oxide thin films with different cerium doping concentrations (3,5 and 10) % which deposited on glass substrate ,sensitivity of thin film sensor elements was investigated in this work. Therefore that the sensitivity of all the samples increases with the increasing in the operating temperature, reaching a maximum value corresponding to an optimum operating temperature which is 300°C for sample (10 %) and 200 °C for samples (3 % ,5 %). In addition ,the sensitivity is directly proportional with the operation temperature for limited range. In general , the sensitivity increases by increasing the concentration of NH₃, NO₂ with increasing temperature degree.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الجامعة: جامعة بغداد
الدرجة: ماجستير
الموضوع الدقيق: الفيزياء
السنة: 2014
الموضوع العام: علوم الفيزياء
اسم المشرف: رعد سعدون صبري محمد جاسم محمد حسن
اسم المؤلف: تغريد سعدون محسن

دراسة نظرية لمستويات طاقة النظائر ( - 2^6)[He] - 4 , ( - 9^18) F - 9 , ( - 15^30) P - 15 بالاعتماد على usda ,usdb ,usd باستخدام حسابات انموذج القشرة النووي Theoretical study of energy levels for (_2^6)?He?_4 , (_9^18)F_9 and (_15^30)P_15 Isotopes depending on USDA,USDB and USD using shell model calculation

المستخلص: باستعمال حسابات انموذج القشرة النووي لتقيم مستويات الطاقة . مصفوفة العناصر النووية للتفاعل المؤثر لنيوكليونين اشتقت لجهود USD,USDB,USDA لوصف التفاعل للنيوكليونات وفقا لفضاء انموذج التشكيل للنوى ولحساب طاقات الربط والتهيج النووي . ووفقا لنظرية الاضطراب حسبت طاقة المستويات على افتراض وجود نيوكليونين بروتون ونيوترون خارج القلب المغلق وصفت وفقا لجهود USD,USDB,USDA العالمية . الحسابات اتمت باستعمال طاقة الجسيمة المفردة لتفاعل النيوكليونات خارج القلب المغلق ولثلاث انظمة , طاقة المستويات حسبت اعتمادا على مبدا الاختيار للزخم الزاوي والبرم النظائري T=0,T=1 لدوال الموجة غير المتناظرة للنيوكليونات . نتائج الحسابات اتمت باستعمال حزمة الماتلاب لحساب مستويات الطاقة مع قيمة عملية ونظرية لطاقة الجسيمة المفردة ونتائج الحسابات قورنت مع القيم العملية لمستويات الطاقة ولوحظ توافق جيد مع القيم العملية | The nuclear structure for low lying energy states of isotopes (_2^6)He_4 , (_9^18)F_9 , and (_15^30)P_15 nuclei have been investigated and studied using shell model depending on the evaluation of the energy levels . Nuclear matrix elements for the effective interaction of two - nucleons have been derived for the USD,USDA and USDB potential to describe the interaction of the nucleons at configuration model space for nuclei to evaluate the binding and excitation energy. According to the perturbation theory , evaluation energy levels with assume two nucleons one proton and one neutron out the closed inert core. The interaction of the nucleons out the closed core describe by USD,USDA and USDB universal potential .the calculations have been performed using single particales energy for nucleons interactions out the closed core in three system.The energy levels are computed depending on the selection rule of angular momentum and the isospin T=1and T=0 for antisymmetric wave functions for nucleons. Their results has been employed using Matlab software to evaluate the energy levels with experimental and theoretical single particle energies. The results data are compared with experimental energy levels which show good agreement
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: احمد موسى اشويخ
اسم المؤلف: ايوب طالب عبد داغر

تصنيف وتحليل الصور الماخوذة للكلى باستخدام خواص النسيج Classification and Analysis of Kidney Images Using Texture Properties

المستخلص: يهدف البحث الى الكشف المبكر وتشخيص الاورام وحصى الكلى من الصور المقطعية CT من خلال استخدام تقنيات برمجيات الحاسوب معالجة الصور الرقمية النظام المستخدم هو برنامج Matlab R2011a. تم استخدام 22 نموذج لخمس حالات من صور الكلى تتضمن الحالات السليمة, الحصى, الاورام (السرطانية), التكيس, والتليف الكلوي. واظهرت النتائج المستحصلة من النماذج القدرة على الكشف بين مختلف الاورام التي تصيب الكلى للحالات المبينة اعلاه. عمليات التقطيع التي استخدمت منها خوارزمية Thresholding التي تم تطبيقها على الصور المقطعية CT للكشف عن الانسجة غير السليمة (الورم والحصى) وفرزها وتميزها عن الاجزاء السليمة. طريقة اخرى استخدمت للتقطيع هي عملية التجزئة بطريقة Watershed segmentation لفصل الورم والحصوة من الكلى. كذلك تم حساب الخصائص النسيجية من مصفوفةLaw's) (Co - occurance, Local Binary, mask الى جانب الخصائص الهندسية لغرض الحصول على افضل نتائج. ان عمليات التصنيف بطريقة Unsupervised هيK - mean clustering استخدم هذا التطبيق على صور ال CT للكشف وتصنيف نوع الورم في الكلى, k - mean والتي تعتبر طريقة لفصل كل صنف على حدة اعتمادا على خصائص النسيج والمسافة بين كل صنف , واللون ان هذه الطريقة المستخدمة هي افضل من Watershed segmentation لانها فصلت وعزلت الاجزاء السليمة في اصناف وكذلك منطقة الورم باصناف لكل واحدة على حدة بصورة واضحة. ان حساب الخصائص الاحصائية للورم والحصوة التي يتم فصلها بواسطة mean clustering K - وحساب الخصائص الهندسية, لتحديد مساحة ومحيط الورم, مهمة جدا لتحديد نوع الورم وكذلك حساب اللاانتظامية التي تعطي مؤشرا حول شكل الورم او الحصوة. ان هذه الطرق تساعد الاطباء للكشف وتمييز الورم عن الحصى ومن ثم تسهيل العلاج من خلال مساعدة الطبيب والاشعاعي للتعرف على الاجزاء المتضررة من الكلى وحماية الاجزاء السليمة قدر الامكان من التعرض للاشعاع. اظهرت النتائج ان افضل الطرق المستخدمة للتجزئة وتحليل النسيج هي K - mean مع مصفوفة Co - occurrence لان K - mean يفصل الاجزاء السليمة ومناطق الضغط حول الورم والحصوة عن النسيج السليم. | The thesis aims to early detection and diagnose kidney tumors and kidney stone from Computed Tomography Scanning CT scan images through the use of computer and software technologies digital image processing, the system implemented in MATLAB R2011a. 22 samples has been used to five cases of kidney images including healthy, stones, tumors (cancer), cystic, and renal fibrosis. The results obtained shows that, the system are able to detecting between different tumors of the kidney the cases mentioned above. The segmentation processes that have been used which is the thresholding algorithm which has been applied on CT images are used to detect unhealthy tissues (tumor and stone). It's important for detoctors to determine the area of the tumor and stone to avoid damaging the healthy tissue during the treatment. Another way to segmentation process is the watershed which has been implemented to segmented the tumor and stone from the kidney. Also the textural process which are the Law's mask, Local Binary and Co - occurance matrix features are calculated beside the geometrical features to produce the best result of feature extraction and tumor predication. The unsupervised classification process which is the K - Mean clustering is used. The application of K - mean on CT images is to detect and classifying the type of tumor in the kidney, The K - mean clustering is a method of separating each class depending on the texture properties and the distance from each class and color, this method is best than watershed, it separated the healthy classes and the tumor classes from each other clearly. The statistical features are calculated for tumor and stone which are seperated by the k - mean cluster analysis process, the geometrical features, which represented the area and permiter is calculated for tumor. it's very important to estimate the irregularity which gives indication about the tumor and stone shape. These methods will enable the doctors to detect the tumor and the stone, then easing tretment, as well, it helps the radiologests to identify the affected parts of the kidney in order to prodect the normal parts as much as possible from exposure to radiation. The result shows, different methods are used for segmentation and texture analysis. But the best one is the k - mean's with co - occurrence matrix since, the k - mean's seperated the healthy classes and the tumor classes. So, it regarded as to be the best way to classify the tumor.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
الموضوع الدقيق: معالجة الصور
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: علياء حسين علي
اسم المؤلف: ايناس حمادي حسن

دراسة نظرية للحاصل الفوتوني لتفاعل كوارك - كوارك Theoretical Study of Photon Yield at Quark - Quark Interaction

المستخلص: تمت دراسة حاصل انتقال الفوتونات في تفاعل الكوارك - كوارك نسبة لتبادل الكلون وبدرجات حرارة عالية بالاعتماد على النظرية الكمية اللونية. انصبت هذه الدراسة على حساب معدل الانتقال الفوتوني والناتج بعملية الفناء للنظام الكواركي باستعمال نموذج بسيط لتفاعل الكوارك - كوارك وفقا للنظرية الكمية اللونية ونظرية الاضطراب باستخدام الاعتبارات الكمية. تم تحديد المعدل الكلي لانتقال الفوتونات الناتجة لعملية الفناء وحسابه كدالة لثابت الاقتران وزخم الانتقال وطاقة الفوتون ودرجة الحرارة الحرجة والطاقة الحرارية للنظام. احتمالية معدل انتقال الفوتون حسبت باستعمال قيمتين للطاقة الحرارية الحرجة Tc=144MeV وTc=170MeV مع عدد من قيم الطاقة الحراريةT=125MeV وT=188MeV وT=250MeV وT=310MeV نسبة الى زخم الانتقال. ان التقريب من الدرجة الاولى للنظرية الكمية اللونية ولفناء الكوارك - الكوارك المضاد تشير الى التباعد الاسي لمعدل الفوتونات العائدة لتفاعل كوارك - كوارك. وفقا لنظرية الاضطراب في درجات الحرارة العالية يتبين لنا تاثير الطاقة لتبادل الكلون على ظاهرتي كل من الحبس اللوني والتقارب الحر والتي توفر معدلات محددة. في هذه الاطروحة تظهر النتائج اثنين من السلوكيات المتميزة لتفاعل الكواركات وهي صفة الحبس والتقارب الحر اعتمادا على ثابت الاقتران. معدل الانتقال الفوتوني يزداد بتناقص ثابت الاقتران وبتناقص طاقة الفوتونات مع زيادة الطاقة الحرارية وانبعاث الفوتونات يكون كبير. من جهة اخرى فان معدل انتقال الفوتون يتناسب مع الطاقة الحرارية الحرجة ويزداد معدل انتقال الفوتون مع زيادة الطاقة الحرارية للنظام ويقل مع زيادة زخم الانتقال . | The transition of photons from a quark - quark interaction due to exchange gluon at high temperatures have been investigated and studied according on quantum chromodynamic theory QCD. This study focuses on the evaluation of the photon transition rate production in an annihilation processes for quarks system using a simple model of quark - quark interaction according on quantum chromodynamic theory and perturbation theory using a quantum consideration. Specifically, the total photons transition rate production at annihilation processes is evaluated as a function of the running strength coupling scaled ,momentum transfer P, photon energy E_γ, critical temperature Tc, and thermal energy T for system. The probability of photon transition rate ζ(α_s,E,T) have been evaluated using two values of critical temperature Tc =144 MeV, and Tc =170 MeV with many values of thermal energy T =125 MeV, T =188 MeV, T=250 and T =310 MeV relative to momentum transfer P=1 to 5 GeV. At first order approximation the quantum chromodynamic theory for quark - antiquark annihilation indicates to exponential divergent of photons yield rates for quark - quark interact. According to the perturbation theory at high temperature we show that effects of energy to the exchanged of gluon on the confinement and asymptotic freedom provide finite rates. In this thesis, results exhibit the two distinct behaviors of quarks state interaction which are described as confinement and deconfinement depending on the running coupling strength α_s (T). The rate transition of photons is increasing at decreasing of running coupling strength α_s (T) and decreases of the photon energy E_γ, with the increase of thermal energy T and emitting photon would be large. On the other hand the photon transition rate proportional to the critical temperature and the photon transition rate increase with the increase of the temperature and decrease with the decrease of momentum transfer
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
الموضوع الدقيق: الفيزياء
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: هادي جبار مجيبل العكيلي
اسم المؤلف: ايناس جاسم محسن ولي

التوصيلية الضوئية للمفرق الهجين a - GaAs : Zn/c - Si Photoconductivity of a - GaAs : Zn/c - Si Heterojunction

المستخلص: حضرت اغشيه زرنيخات الكاليوم المشوب بعنصر الزنك بنسبة 1% GaAs : Zn باسماك مختلفة mµ(1.0 ,0.75 ,0.5 ,0.25) بتقنية التبخير الوميضي على ارضيات زجاجية ورقائق من c - Si بدرجة حرارة الغرفـة وتحت ضغط فراغي 10 - 5 mbar وبمعدل ترسيب مقارب الى 0.92Å/s لدنت هذه الاغشية بدرجات حرارة تلدين مختلفة K(373, 473 ) لمدة ساعة واحدة ولدراسة الخواص التركيبية تم تلدين اغشية زرنيخ الكاليوم المشوبة بالزنك والمرسبة على الزجاج بسمك mµ0.5 الى درجة حرارة and773)K473,373).تم دراسة الخواص التركيبية للاغشية المحضرة على ارضيات زجاجية بواسطة حيود الاشعة السينية XRD وقد اظهرت نتائج حيود الاشعة السينية ان الاغشية الملدنة بدرجة حرارة اقل من 473K ذات تركيب عشوائي وبزيادة درجة حرارة التلدين اصبح التركيب متعدد التبلور F.c.c عند درجة حرارة 473K وبالاتجاه المفضل (111) ,اما دراسة خصائص السطح المورفولوجية بواسطة مجهر القوة الذري (AFM) , فقد وجد ان خشونة السطح تقل مع زيادة درجة الحرارة التلدين وتزداد مع زيادة السمك اما الحجم الحبيبي فوجد انه يزداد مع زيادة درجة حرارة التلدين والسمك.درست الخصائص الكهربائيــة للاغشية المحضرة على ارضيات زجاجية بتغير السمك ودرجة حرارة التلدين حيث ازدادت التوصيلية الكهربائية المستمرة (2.05 - 59.3) 10 - 3 (.cm) - 1 لجميع الاغشية المرسبة بزيادة السمك وبدرجة حرارة الغرفة قلت (15.1 - 2.39) 10 - 3 (.cm) - 1 بزيادة درجة حرارة التلدين من (RT - 473)K للاغشية ذات سمك 0.5mm، قلت طاقات التنشيط الكهربائية (Ea1& Ea2)بزيادة سمك الغشاء وزادت بزيادة درجة حرارة التلدين (RT - 473)K. اظهرت قياسات التوصيلية المتناوبة لاغشية الـ GaAs : Zn باسماك مختلفة وبدرجات حرارة تلدين مختلفة بانها تنطبق مع نموذج تنطط الحاجز المرتبط(CBH) . وبينت قياسات هول الى ان جميع الاغشية هي من النوع (p - type)، وتركيز الحاملات يزداد - 89.29 )×1016 cm - 3 (0.08 بزيادة سمك الغشاء وتقل (1.95 - 0.21)×1016 cm - 3 بزيادة درجة حرارة التلدين (RT - 473)K. وكذلك لاحظنزايادة قيم التحركية بزيادة درجة حرارة التلدين ,بينما تقل مع زيادة السمك.اظهرت القياسات البصرية لاغشية a - GaAs : Zn بان الانتقالات البصرية كانت مباشرة مسموحة ذات فجوة طاقة تزداد مع زيادة درجة حرارة التلدين بينما تقل مع زيادة السمك.قيست سعة الانحياز العكسي للمفرق الهجين a - GaAs : Zn/c - Si كدالة لفولتية الانحياز وبتردد 100KHz وقد دلت هذه النتائج على ان المفرق من النوع الحاد، لوحظ تناقص السعة بزيادة جهد الانحياز العكسي، وايضا لوحظ ان السعة تقل بزيادة سمك الغشاء وتتناقص مع زيادة درجة حرارة التلدينF/cm2(2.24 - 1.54) للسمك 0.5µm. وجد ايضا ان جهد البناء الداخلي للمفرق يتناقص 0.15)Volt (0.40 - عند زيادة السمك .درست خواص تيار - فولتية للمفرق الهجين a - GaAs : Zn/c - Si تحت ظروف الظلام وقد وجد بانها تتفق مع نموذج اعادة الاتحاد - الاختراق ، كذلك اظهرت النتائج ان كثافة التيارتقل بزيادة درجة حرارة التلدين وسمك الغشاء وذلك بسبب زيادة العيوب عند سطح المفرق. وعامل المثالية يزداد بزيادة سمك الغشاءمن(2.4 - 2.7). ومن خلال قياسات تيار - فولتية تحت ظروف الاضاءة وجدنا ان كثافة التيار الضوئي يزداد مع زيادة درجة حرارة التلدين ويقل مع زيادة السمك.درست خواص كثافة تيار الدائرة القصيرة وفولتية الدائرة المفتوحة حيث وجدنا ان ,Jsc Voc, تزداد قيمهم بزيادة درجة حرارة التلدين | GaAs weight doping percentage by 1% Zinc (GaAs : Zn) films have been deposited by flash evaporation technique on glass and c - Si wafer substrates at room temperature under vacuum of 10 - 5 mbar with rate of deposition near to 9.25Å/sec. These films of different thicknesses (0.25, 0.5, 0.75, 1.0) µm have been annealed at different temperatures Ta (373, 473)K for to study the properties of structure of a - GaAs : Zn films that deposited on glass substrate with thickness 0.5 µm annealed at (373, 473 and 773)K. The structural characteristic of the films prepared on glass substrates have been studied by using X - ray diffraction, which shows that the films have amorphous structure for sample annealed at Ta> 473K. The samples annealed at 473 K showed a polycrystalline with Face - Center cubic system preferred orientation along (111).The surface morphological characteristics were studied by atomic force microscope (AFM) which show that decreased in surface roughness with increasing annealing temperature and increased with thickness increases. The grain size increases with increasing annealing temperature and thickness.Electrical properties of the films prepared on glass substrates were studied with different thicknesses and annealing temperatures. The D.c conductivity for all deposited films increases from (2.05 to 59.3) 10 - 3 (.cm) - 1 with thickness increases at room temperature and decreases from(15.1 to 2.39) 10 - 3 (.cm) - 1 with increase of annealing temperature from RT to 473K for films of 0.5m. The electrical activation energies Ea1and Ea2 decrease with thickness increases and increasing with increasing of annealing temperature from room temperature to 473K. A.C conductivity measurements for GaAs : Zn films with different thickness and annealing temperatures were consistent with correlated barrier hopping model (CBH).Hall measurements showed that all the films are p - type with carrier's concentration increasing from( 0.08 to 89.29)×1016 (cm) - 3 with film thicknes increase and decreasing from (1.95 to 0.21)×1016 (cm) - 3 with increasing of annealing temperature from room temperature to 473K. Also we observe that the mobility values decreases with thickness increases and increasing with increasing of annealing temperature. The optical measurement showed that the nature of the optical transition has been direct allowed with band gap energies increases with increasing of annealing temperature while decreases with increases of film thickness.The reverse bias capacitance for a - GaAs : Zn/c - Si heterojunction was measured as a function of bias voltage at frequency 100 KHz, and it is indicated that these heterojunction are abrupt. The capacitance decreases with increasing the reverse bias voltage, also decreasing with increasing annealing temperatures from (2.24 to1.54) ×10 - 7 F/cm2 for film thickness 0.5 µm and with increasing film thickness.The value of built - in potential for heterojunction decreases from (0.4 to 0.15) Volt with increasing of thickness.while increases with increasing temperature from (0.3 - 0.4) Volt for film thickness 0.5 µm.The J - V characteristics of the a - GaAs : Zn/c - Si heterojunction under dark have been studied under dark condtion. This may be in agreement with tunneling recombination model. Furthermore, the product shows that the current density decreases with the increasing of annealing temperature and film thickness for the increases in the defects at heterojunction interface. The ideality factor increases with the increasing film thicknes from (2.4 to 2.7). Under illumination, the photocurrent density increases with increases of annealing temperatures and it decreases with the increases of thickness. The short - circuit current density and open - circuit voltage have been studied where the Jsc ,Voc , increase with the increasing of annealing temperatures
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
الموضوع الدقيق: الفيزياء
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: حسين خزعل رشيد رامز احمد الانصاري
اسم المؤلف: ايمان كاظم جبر

تحضير جسيمات اوكسيد الخارصين النانوية الممزوجة بالحديد بطريقة الليزر النبضي Synthesis of ZnO Nanoparticles Mixed with Fe Using Pulse Laser Deposition

المستخلص: In this work, pulsed laser deposition (PLD) technique is employed to prepare pure ZnO and ZnO mixed with Fe thin film at different concentration on glass substrate. Nd.YAG laser beam, λ=1064 nm, repetition rate 6Hz with the pulse duration 10ns has been used to deposited ZnO and ZnO : Fe thin films under vacuum of 10 - 2mbar. The effects of the number of laser pulses (100,300,600 and 800), Fe concentration (3,5,7%wt) at ambient temperature and annealing temperature at 500ºC on the structure, optical and electrical properties of these films have been studied.The structure characteristic investigated by X - Ray Diffraction (XRD). XRD pattern showed that as number of laser pulses increase the structure changed from amorphous to polycrystalline at 800 laser pulses for pure ZnO. For ZnO : Fe(3%) the structure stay polycrystalline and the intensity increased also the grain size increase. Same result obtained as the concentration of Fe increased (3,5and 7%) for ZnO : Fe thin films and after annealing.The morphology is analyzed by AFM technique. The AFM results showed that the Root Mean Square (RMS) of surface roughness is increased with increasing number of laser pulses from 5.96 nm to7.16 nm and from 3.23nm to 10.2nm for both films of pure ZnO and ZnO : 3%Fe respectively. The RMS for both surfaces were increased at the pulses range 4.15nm to 8.55nm when increasing Fe concentration at ambient temperature and conducted by annealing process.The optical properties measured by UV - VIS spectrometer to compute the band gap of pure ZnO and ZnO : Fe were found high transparent in the visible region band gap for ZnO and ZnO : 3%Fe were decreased from 3.13 eV to 2.9eV and from 2.8eV to 2.55eV respectively. As well as the energy gap was found severe reducing in its values when the Fe increased, where the energy gap suffer decreased and became 3.02eV to 2.52 eV at ambient temperature and from 3.15 eV to 2.7eV after performed annealing process.The hall effect measurement proves that the pure ZnO and ZnO : Fe are n - type semiconductor, the conductivity is increased by increasing mixing Fe concentration where the value was increased from 6.4X10 - 4 Ω. - 1cm. - 1 to 6.37 Ω. - 1cm. - 1 and from 1.97X10 - 5 Ω. - 1cm. - 1 to 5.207 Ω. - 1cm. - 1 when achieved annealing at 500ºC.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: سمر يونس طه
اسم المؤلف: ايمان عكيدي مكحول

المتحسسات الطبيعية للخلايا الشمسية ذات الصبغات المتحسسة على قواعد اوكسيد الخارصين Natural Sensitizer for Dye - Sensitized Solar Cells Based on Zinc Oxide

المستخلص: This thesis focused on the study of dye - sensitized solar cells (DSSCs) based on ZnO nanoparticle as a semiconducting layer with two natural dyes.The present study began by synthesizing ZnO nanoparticles by two methods. The first method ZnO nanoparticles prepared by sol - gel method with (0.1, 0.2, 0.3 M) zinc acetate and then thin films of zinc oxide prepared by using spin coating technique with thickness equal to (109 nm), while the second method technique of ZnO nanoparticles prepared by sol gel method (0.2 M) from zinc acetate was selected as the optimum concentration to make thin film of zinc oxide (In the form of a paste) by using doctor - blade technique with thickness equal to (111nm).The effective mass model for spherical particles (Brus equation) for ZnO nanoparticles were (1.3147, 1.4056, 1.6379 nm) for three concentration.The characteristic of the prepared films on glass substrates have been examined by X - ray diffraction analysis (XRD), UV - Vis spectroscopy, photoluminescence spectrum (PL), scanning electron microscopy (SEM), Atomic Force Microscope (AFM) and Thermo Graviometric Analysis (TGA).In both methods , ZnO films were prepared on transparent conducting oxide (ITO) coated glass then addition of chlorophyll as sensitized dye which extracted from spinach leaves and anthocayanin pigment from pomegrenate juice and they were used as the working electrode (anode) of dye - sensitized solar cell (DSSCs).The absorption spectra of all dyes were performed by UV - Visible spectroscopy which showed that the dye absorbed light in the visible region from (400 nm) for chlorophyll pigment and (510 nm) for anthocyanenpigment.The (I - V) characteristic curves of the fabricated tow cells were measured and studied at constant light intensity. All photovoltaic parameters of the cells were presented. The results revealed that the extract of Pomegranate by using spin coating lead to the highest efficiency (15%).
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: صلاح عبد الله حسون رعد محمد صالح الحداد
اسم المؤلف: اوراس طارق شاكر

تشخيص ورم الكبد من الصور المقطعية باستخدام معالجة الصور الرقمية Diagnosis of Liver Tumor from Computed Tomography Images using Digital Image Processing

المستخلص: This work aims to detect and diagnoses liver tumors from Computed Tomography images using digital image processing, this is a modern technique which depends on using computer in addition to textural analysis to obtain an accurate liver diagnosis, despite the method's difficulty that came from liver's position in the abdomen among the other organs. This method will enable the surgeon to detect the tumor and then easing treatment also it helps physicians and radiologists to identify the affected parts of the liver in order to protect the normal parts as much as possible from exposure to radiation. This work describes a new 2D liver segmentation method for purpose of segmented as a treatment for liver tumors. Liver segmentation is not only the key process for volume computation but also fundamental for further processing to get more anatomy information for individual patient. Due to the low contrast, blurred edges, large variability in shape and complex context with clutter features surrounding the liver that characterize the CT liver images. The method has been implemented in MATLAB and a Graphical User Interface was created. These imaging studies have contained a total of 22 CT images, including five Haemangioma, five Cyst, five Cirrhosis, five carcinomas and two healthy livers. Calculating the area of the abnormal part (tumor), an algorithm has been created to colored images depending on the boundary. The images have been transformed from RGB color space to HSV color space to identifying different colors in fabric by analyzing the HSV color space. This helps to separate abnormal part in to K - clusters. The method is very effective and gives the best result for classification process. Since it depend on the color of the texture and on the distance between the classes. The 2D segmentation process which is based on the hybrid method which is the combination of modified k - Mean (which depend on the distance and color), and the statistical structure which is the first order statistical feature. The statistical features are : Mean, Variance, Standard deviation, Skewness, Kurtosis, Energy and Entropy, and the geometrical feature which are area and the irregularity. These features together helps to diagnose the liver tumor and to classify these tumor
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
الموضوع الدقيق: معالجة الصور
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: علياء حسين علي
اسم المؤلف: انتظار مالك هادي

دراسة نظرية لليزر الليف البصري المطعم بالنديميوم Theoretical Study for Neodymium - Doped Optical Fiber Laser

المستخلص: to find equation of lasing output power (Pout) by using the numerical emulation Secondly, calculating the (Pout) of Nd+3 - doped optical fiber laser as a typical example for the optical fiber laser, which is process according to this system. The required equations to calculate (Pout) was programmed by Matlab program (version8.1). Two types of hosts were used in this simulation, the first type is Silica with four designs using commonly in the above mentioned, the four designs are Lycom (a), Lycom (b), York and IVA with lasing emission at the wavelengths (1064×10 - 9m) and (1331×10 - 9m). The second type of hosts is ZBLAN with only one design is Le Verre fluore, with lasing emission at two wavelengths (1048×10 - 9m) and (1317×10 - 9m). The first step in this emulation was determining the value of numerical aperture (NA) for each design of special designs and at the special wavelengths for every host, which can obtain the highest values of lasing output power (Pout) and efficiency (η) at value of (NA).The second step was calculating the (Pout) corresponding to pump power (Po) for each host according to the designs and the wavelengths related to the host, In case of the host Silica, for the two wavelengths of this host, it is found that the (Pout) was the highest value when the design (York) was used, while in case of the host (ZBLAN), it is found the highest value of (Pout) is when using the wavelength (1048×10 - 9m). For addition that, it is found that to obtain the highest values of (Pout) and (η) for this type of laser, it must be use the host Silica at the wavelength (1048×10 - 9m). According to that, the third step was using this host and this wavelength to calculate the effect of the numerical aperture (NA), core radius (a), cladding radius (b), fiber length (L),reflection coefficients (R2), Nd+3 - dopant concentration in the core (No), lifetime of upper laser level (T2) and pump power (Po) on the (Pout). The changing of the above mentioned coefficients values was determinate with its range which is finding in four designs related to the host Silica. It is found that the value of (Pout) decreased with the increase of the values of (NA, a, b, L and No), while increase with the increase of the values of (R2 ,T2 and Po), through that, the optimal values of these coefficients which must be used to obtain the highest values of (Pout) and (η) for this type of laser.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: مظهر شهاب احمد
اسم المؤلف: امجد عبد الحميد سلمان

دراسة تاثير البلازما غير الحرارية على الخصائص التركيبية والبصرية لاغشية SnO2

المستخلص: في هذه الدراسة تم استخدام منظومة بلازما الحاجز العازل (DBD _system) لدراسة تاثير البلازما غير الحرارية في الخصائص التركيبية والبصرية لاغشية اوكسيد القصدير SnO2 المحضرة بطريقة الرش الكيميائي الحراري, تتكون هذه المنظومة من قطبين مصنوعين من النحاس محاطين بمادة عازلة من التفلون , يربط قطبا المنظومة الى طرفي محولة عالية الفولتية متغيرة (1 - 15) كيلو فولت ,وتعمل بفولتية ادخال 220 فولت وذات تردد 50 هيرتز وفولتية اخراج 15 كيلو فولت . تم تحضير اغشية ثنائي اوكسيد القصدير (SnO2) الرقيقة بطريقة الرش الكيميائي الحراري ذات سمك mμ 0.725 من خلال رش محلول مكون من كلوريدات القصدير المائية (SnCl4. 5H2O) المذابة في الماء المقطر بتركيز 0.1M وعلى قواعد زجاجية بدرجة حرارة 450˚C . تم تشخيص الخصائص التركيبية للاغشية من خلال دراسة نمط حيود الاشعة السينية (XRD) .اذ اظهرت النتائج ان اغشية ثنائي اوكسيد القصدير ذات تر كيب متعدد التبلور ومن النوع الرباعي مع هيمنة الاتجاه (110) . ووجد ان هذا التركيب لم يتاثر بالبلازما غير الحرارية اي انه لم يلاحظ اي تغير في الخواص التركيبية للغشاء حين عرضت الاغشية المحضرة لبلازما غير الحرارية المنتجة من منظومة الحاجز العازل ولازمان مختلفة (10,8,6,4,2) دقيقة وكذلك تم دراسة علم التشكل وخشونة السطح للاغشية المحضرة في بحثنا هذا سجلت صور سطح التشكل بواسطة جهاز AFM وقد وجد ان هناك تباين في قيم الحجم الحبيبي حيث انها تتغير مع زيادة زمن التعريض للبلازما .تمت دراسة الخواص البصرية للاغشية المحضرة من خلال تسجيل طيف النفاذية ، ولمدى الاطوال الموجية (300 - 1100)nm، كما وجد ان الانتقالات الالكترونية عند حافة الامتصاص الاساسية كانت من النوع المباشر المسموح. ولوحظ ايضا تباين في قيم فجوة الطاقة حيث انها تتغير مع زيادة زمن التعريض للبلازما . كما استعمل طيف النفاذية في ايجاد الانعكاسية والامتصاصية ومعامل الامتصاص والثوابت البصرية المتضمنة معامل الانكسار، ومعامل الخمود، والجزء الحقيقي والخيالي لثابت العزل وكذلك ايجاد التوصيلية البصرية .وجد بان كل من الامتصاصية ومعامل الامتصاص ومعامل الخمود والجزء الخيالي من ثابت العزل والتوصيلية البصرية تزداد مع زيادة زمن التعريض للبلازما, بينما تقل كل من النفاذية والانعكاسية والجزء الحقيقي من ثابت العزل ومعامل الانكسار مع زيادة زمن التعريض للبلازما | In this study, the use of plasma dielectric barrier system (DBD _system) to study the non - thermal plasma effect on the structural and optical properties of tin oxide SnO2 films prepared by Chemical Spray pyrolysis , this system consists of two electrodes Mades of copper surrounded by insulating material Teflon, connects the pole system to both ends of a converted high - voltage variable (1 - 15) kV, type (Ac) and change voltages beyond the converted (voltage introduction of 220 volts, frequency 50 Hz, and the voltage output of 15 kV) by changing the input voltage it by linking it to equipped voltage alternating variable (0 - 220) volts. Tin oxide (SnO2) thin films were prepared by Chemical Spray pyrolysis way through a Solution spray consisting of tin chlorides water (SnCl4. 5H2O) dissolved in distilled water concentration (0.1M) and the rules on a glass 450˚C degree heat. It was diagnosed with structural properties of the films through the study of X - ray diffraction pattern (XRD) . As the results show that the tin oxide films binary tree with multi - Cape gelling and It is kind quartet with the dominance of direction (110) . It was found that this installation was not affected by any non - thermal plasma that not noticed any change in the structural properties of the films. Films prepared Offered to non - thermal plasma producer from dielectric barrier system and different times (0,2,4,6,8,10) minutes and The atomic force microscope (AFM) images shows that the (Roughness Average, Average Diameter and the square root of the average roughness square (RMS)) all of the film (SnO2) decreased and increase with increase Time exposure to Non - Thermal Plasma . Optical Properties for films prepared were studied by recording the spectral transmittance and absorbance, to the extent wavelengths (300 - 900) nm, also found that the electronic transfer at the edge of the fundamental absorption was one of the allowed direct kind. It was also noted an increase and decrease in the value of the energy gap with increasing time of exposure to plasma. Absorbance and Transmtion spectra have also been used to find the reflective optical constants included refractive index, and the coefficient of Extinction, the real and the imaginary part of the dielectric constant and optical connectivity. Found that all of the absorbance , the coefficient of absorption , Extinction coefficient , the imaginary part of the dielectric constant and optical conductivity increases with increasing exposure to plasma time, while at least each of the transmittance , reflectivity ,real part of the dielectric constant and the refractive index decreases with an increased exposure to plasma time
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: العربية
الدرجة: ماجستير
الموضوع الدقيق: الفيزياء
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: حامد حافظ مربط
اسم المؤلف: الاء خميس برد علوان

دراسة تاثير معقداث معدنية على الخواص البصرية والكهربائية وفوق السمعية لاغشية بولي فينيل الكحول وبولي فينيل استيت المحضرة بطريقة الصب Studying the Effect of Metal Complexes on the Optical, Electrical and Ultrasound Properties of PVA and PVAc Films Prepared by Casting Method

المستخلص: The present study focused on the modification of the structural, optical and electrical properties and acoustical parameters of poly (vinyl alcohol), poly (vinyl acetate) and polyblend of (poly (vinyl alcohol) + poly (vinyl acetate)) by adding (0, 3, 6 and 9) wt.% of metal complexes, which are : Chloropentaaminecobalt (III) chloride [Co(NH3)5Cl]Cl2 and Potassium Dioxalatocuprate (II) Dihydrate K2[Cu(C2O4)2].2H2O. The mentioned composites films were prepared by solvent casting technique.All samples were structurally investigated by X - ray Diffraction XRD, Fourier transform infrared spectroscopy FTIR, Scanning electron microscope SEM which revealed that there is an association between the polymer matrix and the additive.The optical data at wavelengths range (190 - 800) nm, were analyzed and interpreted in term of the theory of phonon assisted indirect electronic transition. It is observed that energy gap decreases as the metal complexes content increases. The smallest obtained energy gap is 1.86 eV for PVAc / [Co(NH3)5Cl]Cl2 composites films. The refractive index, extinction coefficient, and the dielectric constant increase with increasing the concentration of the additive.The D.C electrical conductivity increases with temperature which exhibited a semiconductor behavior. Also the activation energy values are decreases with increase of additive concentration.The A.C electrical conductivity is increased with increasing applied electrical field frequency (102 to 5*106) Hz and with additive concentration. The dielectric constant and dielectric loss were decrease with increasing the frequency and increase with the concentration of the additive.The acoustical parameters have been measured in frequency range of (25, 30, 35 and 40) KHz. Metal complex enhances the ultrasonic absorption coefficient of polymer matrix. The velocity decreases with increasing metal complex.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2005
الموضوع العام: علوم الفيزياء
اسم المشرف: ندى خضير عباس مجيد علي حبيب
اسم المؤلف: الاء جواد كاظم الكدساوي

تصنيع ودراسة الخصائص البصرية والكهربائية لاغشية CdSe/Si كخلايا شمسية باستخدام تقنية البلازما Fabrication and Study Optical and Electrical Properties of CdSe/Si Films As a Solar Cells Using Plasma Technique

المستخلص: تم في هذه الدراسة تصنيع الخلية الشمسية (CdSe/Si) بتقنية الترذيذ ذي التيار المستمر وذلك بترسيب اغشية رقيقة من سيلنيوم الكادميوم على رقائق من السليكون بسمك مختلف nm(300,400,500) وبزمن ترذيذ مختلف(30,45,60) min ومسافة بين الاقطاب 4cm تحت ضغط فراغي 10 - 5 ملي بار ثم لدنت الاغشية بدرجات حرارة مختلفة K (348,373,423). تم ايضا دراسة تاثير ضغط الاركون اعلى خصائص البلازما والتي تتضمن : درجة حرارة الالكترونTe, كثافة الالكترونات ne وكثافة الايونات ni حيث جرى قياسها تحت ضغوط مختلفة من غازالاركون.لقد وجد ان درجة حرارة الالكترون تقل بزيادة ضغط غاز الاركون وان كثافة الالكترونات تزداد بزيادة ضغط الغازوان سلوك كثافة الايونات مشابه لسلوك كثافة الالكترونات ولكن بقيمة اعلى. ثم تم دراسة الخواص التركيبية للاغشية المحضرة على ارضيات زجاجية بواسطة حيود الاشعة السينية ,(XRD)وقداظهرت نتائج XRD ان الغشاء بسمك nm300 قبل التلدين كانت عشوائية ويزداد التبلور لجميع الاغشية عند زيادة التلدين ليصبح متعدد التبلور . درست الخصائص البصرية لاغشية سيلنيوم الكادميوم المحضرة على ارضيات زجاجية بسمك مختلف قبل وبعد التلدين من خلال قياس طيفي النفاذية والامتصاصية كدالة للطول الموجي وكانت نتائج النفاذية عالية جدا مما جعلها ملائمة لتطبيقات الخلايا الشمسية حيث تبين ان النفاذية تزداد بزيادة درجات حرارة التلدين وتقل بزيادة السمك , وان الامتصاصية تقل بزيادة درجات حرارة التلدين وتزداد بزيادة السمك عند الاطوال الموجية القصيرة. ولوحظ ان معامل الامتصاص البصري لاغشية سليلنيوم الكادميوم يقل تدريجيا بزيادة الطول الموجي ودرجات الحرارة والسمك وان قيم معامل الامتصاص التي تم الحصول عليها هي اعلى من (cm - 1 104) مما يؤكد ان الانتقال هومن النوع المباشر . كما تم حساب فجوة الطاقة البصرية لسمك مختلف وتبين ان فجوة الطاقة تزداد بزيادة درجة الحرارة وتقل بزيادة السمك وكذلك حسبت الثوابت البصرية المتضمنة معامل الانكسار ومعامل الخمود وثابت العزل بجزئيه الحقيقي والخيالي كدالة للطول الموجي . وكذلك تم دراسة الخصائص الفوتوفولتائية المتضمنة قياس (سعة - جهد) للمدى Volt (0 - 1) عند تردد ثابت مقداره kHz (200) وتم من خلال هذه القياسات معرفة نوع المفرق الهجيني للخلية الشمسية (CdSe/Si) وتبين انه من النوع الحاد . وتم حساب جهد البناء الداخلي وقد لوحظ ان جهد البناء الداخلي يزداد بزيادة درجة حرارة التلدين والسمك وتم كذلك حساب عرض منطقة النضوب ووجد انها تقل بزيادة درجات حرارة التلدين وتزداد بزيادة السمك وكذلك لاحظنا ان السعة تقل بزيادة فولتية الانحياز العكسي , وايضا تقل بزيادة السمك لكن السعة تزداد بزيادة درجة حرارة التلدين . وعند قياس تيار - فولتية تحت ظروف الاضاءة للخلية الشمسية وجدنا ان كفاءة الخلية الشمسية(η) تزداد قيمهما بزيادة السمك وبزيادة درجة حرارة التلدين من 2.2 الى3.1ومن 2.2الى6.5 على التوالي وقد فسر سبب ذلك بوجود تغير في تركيب الاغشية وكذلك تحسن طبقة التداخل بين n - CdSe وp - Si.وحسبت كفاءة الخلية الشمسية وكانت افضل كفاءة (6.5%) عند سمك nm (500) ودرجة حرارة تلدين K (423) وشدة اضاءة mW/cm2 (69). | In this study , a solar cell (CdSe/Si) by DC Planar Sputtering Technique has been manufactured . CdSe films have been deposited on wafer of silicon prepared with different thicknesses (300,400 and 500) nm at different sputtering time equal to(30,45 and 60) min and distance is equal to 4cm under vacuum of 10 - 5 mbar and different annealing temperature (348,373 and 423) K .The effect of Argon gas pressures on plasma characterizations were studied such as : electron temperature Te, electrons density ne, ions density ni under different Argon gas pressures. It has been found that the electron temperature decreases with increasing Argon gas pressure. The electron density was found to increase with increasing argon gas pressure .The behavior of ions density was similar to that of the electrons, but their value was higher. The structural characteristic of the CdSe films prepared on glass substrates has been studied by using X - ray diffraction. The tests showed that all these films are polycrystalline, and their the structures, transformed to crystalline when the annealing temperature Ta increased . Optical properties of cadmium selenide films with different thicknesses are prepared on glass substrate are studied before and after annealing by measuring their spectral transmittance and absorbance as a function of wavelength. The results of the transmittance is very high, making it suitable for applications of solar cells. It was found that the transmittance increases with increasing of annealing temperature and decreases with increasing of thickness. It was found also that the absorbance decrease with increasing of annealing temperature and increases with increasing thickness at short wavelengths. It was noticed that the absorption coefficient of cadmium selenide gradually decrease with increasing of wavelength and annealing temperature, but decreases with increasing thickness. The value of absorption coefficient is greater than 104 cm - 1 , which refers to direct transition kind . Optical energy gaps of CdSe films were calculated for different thicknesses respectively. The energy gap increases with increasing temperature and decreases with increasing of thickness .The optical constants, refractive index , extinction coefficient and dielectric constant ( real and imaginary parts) as a function of wavelength were calculated as well .It was also studied the electrical and photovoltaic characteristics of these films including the measurement of the (capacity - voltage) at bias voltage (0 - 1) volt at constant frequency of (200) kHz. We observed that the type of heterojunction solar cell (CdSe/Si) was abrupt. Also we calculated the built - in potential and noticed that its values increase with increasing of annealing temperature and thickness. We also calculated the width of the depletion region and we found its values decrease with increasing of annealing temperature and increases with increasing thickness . It also noticed that the capacity decrease with increasing reverse bias voltage, and thickness but increases with increasing of annealing temperatures. The current - voltage characterization under illumination it was found that the efficiency (η) increase with increasing of the thickness and annealing temperatures from 2.2 to 3.1 and from 2.2 to 6.5 respectively , while increase with increasing of annealing temperatures due to the existence of change in the structure of films and the improve in the interface layer between n - CdSe and p - Si. The efficiency of the cell was calculated and its best value was (6.5%) at thickness (500) nm, annealing temperature (423)K and intensity of illumination (69 mW/cm2) .
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
الموضوع الدقيق: فيزياء البلازما
السنة: 2013
الموضوع العام: علوم الفيزياء
اسم المشرف: حامد حافظ مربط كاظم عبد الواحد عادم
اسم المؤلف: ولاء مراد علي رضا

حساب الحاصل النيوتروني للتفاعلات (?,n) و(p,n) لبعض النوى المتوسطة لمدى طاقي (50 - 100 MeV) باعتماد المعادلات شبه التجريبية Neutron Yield Calculations for (?,n) and (p,n) reactions for Some Intermediate Nuclides in the Energy rang (50 - 100MeV)by using Semi - empirical formula

المستخلص: ان اغلب المقاطع العرضية لاغلب النظائر المشعة تكون مفقودة عند طاقات معينه في المختبرات العالمية ، لذا تم استخراج مجموعة صيغ رياضية شبه تجريبية موحدة لحساب الحاصل النيوتروني بالاعتماد على العدد الكتلي للنظير وطاقة القذيفة ، اما طاقة منفردة او مدى من الطاقات . تم العمل على جمع بيانات المقاطع العرضية مقابل الطاقات للمدى (50 - 100 MeV)من المختبرات العالمية (Koning , A . J . ; TENDL - 2010 - 2012) لنوعين من التفاعل (α,n) و(p,n) مع نظائر اربعة عناصر( 33As, Fe26 , Mn25 ، (32Geلكل عنصر عشرة نظائر فيصبح مجموع التفاعلات اربعين تفاعل كما تم حساب قدرة الايقاف للبروتون ولجسيمة الفا بوساطة برنامج (SRIM - program - 2013)، ومن ثم حساب الحاصل النيتروني باستخدام برنامج (الماتلاب2008a)، وهو مصمم لهذا الغرض ، تم حساب طاقة اللاتناظر لكل نظير ومن ثم استخراج صيغ رياضية من خلال افضل عملية ملائمة (fitting) بين طاقة اللاتناظر والحاصل النيوتروني للتفاعل عند الطاقات (50,60,70,80,90,100 MeV) لاهداف نوى متوسطة مختلفة . وضعت المعلمات الاولية المستخرجة من الصيغ الرياضية في جداول ، ورسمت العلاقة بين كل مجموعة معلمات والطاقة المقابلة لها لغرض استخراج معادلات موحدة ، والتي من خلالها تم ادخال متغير الطاقة في المعادلة الاساسية المستخرجة ، وبعد رسم العلاقات وجدنا المقاطع العرضية للتفاعل (α,n) اصغر من التفاعل (p,n) ، وان الحاصل النيوتروني يزداد مع زيادة طاقة الجسيم الساقط وتناقص العدد الكتلي ، وان النتائج المحصلة من الصيغ الرياضية الجديدة المعتمدة على القيم العملية في تطابق جيد مع النتائج النظرية المنشورة . | cross sections for many reactions for most of isotopes with different energies in international laboratories were missed so we get a mathematical semi - empirical equations for calculating the neutron yield depending on mass number of target and projectile energy (single enrgy or range of energy ) . Data of cross sections were collected from international libraries (TENDL,Kong) from 2010 to 2012 for tow types of reaction (α,n) and (p,n) for energies (50 - 100MeV) with ten isotopes of (33As , 26Fe , 25Mn , 32Ge) elements , that is mean the total number of reaction will [40] reaction , then stopping power for proton and alpha particle were uese calculated using SRIM program 2013 then neutron yield was calculation using Matlab program 2008a designed for this purpose so as asymmetry energy for each isotope then by fitting relation of asymmetry energy with neutron yield for, the reaction at energies (50,60,70,80,90,100) MeV with intermediate nuclide we get . The parameters were tables and from their relations with energy we get final set of semi - empirical equations, then it was drown , we from this fingers we concluded that the cross sections for (α,n) reactions were less than (p,n) reactions and the neutron yield in cress with increasing the projectile energies and with decreasing of atomic number all the results that got from this new semi - empirical equations that we got from experiment data was in good agreements with published the data .
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: العربية
الدرجة: ماجستير
الموضوع الدقيق: الفيزياء
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: خالد هادي مهدي العبيدي
اسم المؤلف: اسيل عادل يوسف