عرض: 25 50 75 100 النتائج

نتائج البحث: 25 من أصل 1,674

دراسة الخصائص التركيبية والكهربائية والمغناطيسية للفرايت النانوي ذي التركيب المغزلي المحضر بطريقة السول (NixCu0.2Zn0.8 - xFe2O4) - جل ذات الا حتراق التلقائي == Studying Structural , Electrical and Magnetic Properties for Nano Spinel Ferrite of (NixCu0.2Zn0.8 - xFe2O4) Prepared by Sol - Gel Auto Combustion Method

اسم المؤلف: عمار عيسى عباس نجم الربيعي
اسم المشرف: احمد رفيق عبد المجيد
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: In this research , Nano spinel ferrite (NixCu0.2Zn0.8 - xFe2O4) was synthesized using sol - gel auto - combustion and flash combustion methods .Nineteen samples were prepared and their studies were divided into three parts. Study the effect of citric acid in preparation of Nano ferrite (Ni0.1Cu0.2Zn0.7Fe2O4) by changing the molar ratio of adding fuel to any sample and the five samples were prepared from (C series). The structural properties of samples were studied using x - ray diffraction technique (XRD) and scanning electron microscope (SEM) which showed that the obtained ferrite possesses spinel cubic phase for all used molar ratios , besides when the concentration of adding fuel was increased leads to decrease in grain size and theoretical density , increase in dislocation density and the surface area. Then the molar ratio (1 : 1 M) was chosen as the best adding ratio due to that the obtained ferrite at this ratio possesses best texture coefficient with small grain size and best internal strain by comparing with the other ratios.  Study the influence of substitute (Zn+2) ion by (Ni+2) ion on the structural , electrical and magnetic properties of Nano ferrite powder (NixCu0.2Zn0.8 - xFe2O4)(0.1≤X≤0.7) synthesized using sol - gel auto - combustion method , there are seven samples were prepared (A) series and tested by two types of structural test included analyzer x - ray diffraction and scanning electron microscope, the results exhibited forming the spinel phase for all samples in spite of the substitute of (Zn+2) ion by (Ni+2) ion, and the increase of (Zn+2) ions concentration leads to decrease in the grain size and increase in theoretical density. Then the ferrite powder was divided in two groups, the first was pressed into the pellet shape which was used in electrical tests and the second group was pressed into the rings shape which was used in magnetic tests. The two faces of the pellets in first group polished by silver paste material in case to obtain a ceramic capacitors that subjected to electrical tests which included the measurement of dielectric constant , dielectric loss coefficient, alternating electrical conductivity and direct electrical conductivity ,and the study of magnetic properties for the rings samples included measurement of hysteresis loop , selfinduction, initial permeability and the relative loss factor. The results of electrical tests exhibited decrease in dielectric constant with frequency increase at room temperature , and dielectric constant increases at certain ratios of adding (Zn+2) ions and decreases at other ratios. However , the dielectric loss coefficient its fall when increasing frequency until reaches its lowest value at the high frequencies values and so it is various when the concentrations of (Zn+2) ion were changed .and the measurement of alternating electrical conductivity displaying it increases with the increasein frequency and it values disparity with the change of (Zn+2)ion concentration , in other hand the direct electrical conductivity increase with substituting (Zn+2) ion concentration increases. The magnetic tests results exhibited that the ratio (X=0.3) with chemical formula (Ni0.3Cu0.2Zn0.5Fe2O4) possesses a significant magnetic properties when compared with other samples because it has the highest initial permeability with lowest relative loss factor and it has best hysteresis loop so that it realized conditions for using it as a cores in transducers and electrical motors. Study the influence of substituting (Zn+2)ion by (Ni+2) ion on the structural properties of Nano ferrite (NixCu0.2Zn0.8 - xFe2O4)(0.1≤ X≤ 0.7) synthesized using flash combustion method, there are seven samples were prepared (F) series tested by two types of structural tests included xray diffraction and scanning electron microscope tests , and the results exhibited form the spinel phase for all samples and no other phases were presented and observed that structural results were agreed with these obtained from sol - gel auto - combustion method.

تاثير جسيمات الفضة النانوية على الخواص البصرية لزجاج التليريوم المشوب بايونات العنصر الارضي النادر السماريوم == effect of silver nanoparticles on the optical properties of glass Tellurium doping ions rare earth element Samarium

اسم المؤلف: عماد محمد احمد عبد الله المرسومي
اسم المشرف: طارق عبد الرضا علوان الظاهر
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The preparation of co - doping Tellurium glass of TeO2−B2O3−PbO by silver nanoparticles and Samarium were performed according 80TeO2−(7.5−x)B2O3−12PbO−0.5Sm+3−(x)Ag. where (x=0,0.05,0.1,0.15,0.2,0.25 mol%) by melting quench technique and annealed at 300°C for 3h as a first stage of this study.The prepared samples of glass ceramic with dimensions 1mmx1cmx2cm were characterized by XRD, SEM and TEM for their structural identification. UV - spectrophotometer in the wavelength (200 - 1100 nm ) Shimadzu and K - Mac SA miniature UV - VIS spectrometer - spectra were used for their absorption and fluorescence spectra.Patterns of XRD revealed amorphous structure for all sample. The element compositions were identified by TEM and EDX attached to SEM. Their densities 5.37 - 5.49 g/cm3 were measured by Archimedes experiment, and the corresponding molar volume were calculated in the range 29.7 - 29.1 cm−3.Their variation occur due to the molarity increase of doping.The absorption spectra revealed seven peaks which represented the transition from the ground state 6H5/2 to different excited states. The band gap for direct transition for all samples about 2.3 eV, while for indirect transition around 1.91eV.The highly doped sample named A5 is selected for fluorescence spectroscopy .It spectra showed five emission bands at 430(4G9/2➙4H5/2), 435(4G9/2➙4H7/2), 450(4G9/2➙4H7/2) , 600 (4I13/2➙4H9/ٕ)and 645(4 G 5/ٕ➙6H15/2) transitions. Then according to the resulted fluorescence spectra of it, two additional samples B1 and B2 were prepared with the same molar percentage as A5,but annealed at the same temperature for 6h and 9h. And two more sampleswere prepared by increases their molarity to 1% and 1.5% for both samarium and silver, symbolized by C1 and C2 respectively. The intensities of their fluorescence spectra increases many times for the same emission bands as it is compared with the same emission bands of A5.

تصنيع ودراسة خصائص كاشف المفرق الهجين CdO/Porous Silicon

اسم المؤلف: عبد الله محمود علي الجبوري
اسم المشرف: نادر فاضل حبوبي | رائد عبد الوهاب اسماعيل
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا البحث، تم ترسيب اغشيةCdO على السليكون المسامي وعلى شرائح زجاجية بطريقة الاكسدة الحرارية السريعة(Rapid Thermal Oxidation) وذلك لدراسة الخصائص التركيبية والكهربائية والبصرية لهذه الاغشية. تم تصنيع كاشف المفرق الهجين نوع CdO/Porous Silicon من خلال الاكسدة الحرارية السريعة لمادة الكادميوم المرسبة على السليكون المسامي ,تم دراسة الخصائص الكهربائية والتركيبية والفولطائية الضوئية لهذه الكواشف من خللال قياسات تيار - جهد وسعة - جهد. تم استخدام التنميش الكهروكيمياوي للسليكون حيث تمت السيطرة على المسامية بتغيير كثافة تيار التنميش وزمن التنميش. لقد اوضحت النتائج ان معلمات الكاشف تعتمد بشكل كبيركثافة تيار التنميش وزمن التنميش. ان اقل قيمة لعامل المثالية التي تم الحصول عليه كانت 1.28 وذلك للكواشف المصنعة بكثافة تيار40 ملي امبير/سم2 وزمن تنميش 600 ثانية .لقد اوضحت نتائج الكفاءة الكمية اي الكواشف المصنعة تمتلك قمتين الاولى تمتص عند المنطقة المحصورة بين اوكسبد الكادميوم والسليكون المسامي اما المنطقة الثانية ناتجة بسبب الامتصاص عندالسليكون البلوري والسليكون المسامي. قيمة الكفاءة الكمية عند المنطقة الاولى كانت بحدود 77% عند الطول الموجي 550 نانومتر بينما الثانية كانت بحدود 88% عند الطول الموجي 700نانومتر. اعلى قيمة للكشفية النوعية كانت بحدود 87 عند الطول الموجي 550 نانومتر للكواشف المصنعة بكثافة تيار 30 ملي امبير/سم2 وزمن تنميش 2400 ثانية. كل الكواشف المصنعة تعمل للمدى الطيفي ( 400 - 900 ) نانومتر. اعلى قيمة لتياردائرة القصر كانت 19 مايكروامبير واعلى قيمة لفولتية الدائرة المفتوحة 420 ملي فولت للكواشف المصنعة. | In this work, CdO thin films are deposited on porous silicon and clean glass substrates by rapid thermal oxidation (RTO) to study structural, electrical and optical properties of these films. CdO/porous Si heterojunction photodetectors have been fabricated by rapid thermal oxidation (RTO) of Cd on porous and are presented. Structural, electrical, and photovoltaic properties of CdO/P - Si heterojunctions prepared by (RTO) on single - crystal p - type and monocrystalline silicon (111) substrates are examined with J - V the C - V methods. The electrochemical etching process was adopted as a technique to control the porosity of silicon wafer by controlling the time of etching in the range (600 - 2400s), and by controlling the etching current density. The results revealed that all our detectors’ parameters are highly dependant on etching time and etching current density. The minimum value of ideality factor is 1.28 for the detectors prepared with etching current density of 40mA/cm2 for 600s. The results of quantum efficiency show that these detectors have two depletion regions, the first one between CdO film and porous silicon layer, the second between the latter and the crystalline silicon. The first peak of quantum efficiency curve is 77% at a wavelength of 550nm while the second one is 88% at 700nm. The maximum specific detectivity was of wavelength 550nm for the detectors fabricated with etching current density of 40mA/cm2 and etching time of 2400s. All detectors are working on the spectrum region 400 - 900nm. The maximum Isc and Voc are 19A, 420mV respectively for the detectors fabricated with etching current density 30mA/cm2 and etching time 1200s

تصنيع دروع واقية من الاشعاع ودراسة بعض خواصها == Manufacture radiation protection shields and study some of its properties

اسم المؤلف: عبد الرحيم ضياء ابراهيم
اسم المشرف: احمد فاضل مخيبر
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذه الدراسة تصنيع دروع واقية من مواد متراكبة مكونة من الايبوكسي كمادة اساس ومواد تدعيم مختلفة (C, Ni, PbO, Bi) وبنسب تدعيم متباينة % (10, 20, 30, 40, 50) وبابعاد cm (1 X 10 X 10) للوقاية من الاشعاع , ولغرض التعرف على مدى ملائمة هذه الدروع للاستعمال في مجال الوقاية من اشعة كاما, قيست بعض معلمات التدريع مثل معامل التوهين الخطي (μ), والعدد الذري المؤثر (Zeffe), وسمك النصف (X_(1/2)), ومعدل المسار الحر (λ_mean), والثقالة للطاقات KeV (121.8, 344.3, 662, 1773 ,1332, 1408) , بالاضافة الى عامل التراكم عند الطاقة 662 KeV , ولهذا الغرض تم استعمال منظومة كاشف ايوديد الصوديوم NaI (TI) مع مصادر مختلفة Eu - 152, Co - 60, Cs - 137. اظهرت النتائج ان هذه المعلمات تتاثر بتغير نسب التدعيم وطاقة اشعة كاما , حيث تبين ان زيادة نسبة التدعيم للدروع ادى الى زيادة كل من معامل التوهين الخطي والعدد الذري المؤثر. وفي المقابل يحدث نقصان قيم كل منهما خلال زيادة طاقة اشعة كاما للمصدر المستعمل . وبخاصة عند التراكيز العالية % (40, 50), والطاقات الواطئة< 0.662 MeV E_γ حيث سجلت قيم معامل التوهين الخطي cm - 1 (2.1726, 3.6161) للدروع المدعمة بالبزموث بنسبة تدعيم %40 و50% على التوالي ولطاقة 121.8 KeV, ولطاقة 344.3 KeV ولنفس التركيزين ايضا cm - 1 (0.36521, 0.4005) على التوالي, اما عامل التراكم فقد وجد انه يقل بزيادة التركيز عند طاقة معينة. اما بالنسبة لسمك النصف ومعدل المسار الحر فقد وجد ان سمك النصف يقل بزيادة التراكيز وبخاصة عند التراكيز العالية وكذلك الحال بالنسبة لمعدل المسار الحر. كذلك تم قياس قيم الثقالة للدروع كافة بالنسبة لعنصر الرصاص, حيث وجد من خلال قيم الثقالة ان هذه الدروع اخف وزنا من مادة الرصاص, مما يجعلها مفضلة على المواد التقليدية مثل الرصاص والكونكريت. واما بالنسبة لكفاءة الكاشف فقد وجد انها تعتمد في قيمها على مادة الدرع ونوعه وكذلك على قيمة الطاقة المستخدمة. وبينت الدراسة ان هناك توافقا جيدا بين القيم العملية والنظرية. | In this study, protection shields has been preparated , consist of composite materials have epoxy as a basis material and different reinforcing materials (C, Ni, PbO, Bi), with different reinforcing ratios (10, 20, 30. 40, 50) %, and dimensions (1 X 10 X 10) cm to protect from radiation, for examination the suitability of using this shields to protect from gamma ray, some shielding parameters was calculated like Linear attenuation coefficient (μ), Effective atomic number (Zeffe), Half layer thickness (X_(1/2)), Mean free path (λ_mean), and Heaviness for energies (121.8, 344.3, 662, 1773 ,1332, 1408) KeV , in addition to build up factor at 662 KeV, for this purpose sodium iodide system NaI(TI) was used with deferent radiation sources Eu - 152, Co - 60, Cs - 137.The results show that this parameter effected by the reinforcing ratio and gamma ray energy, it was found the linear attenuation coefficient and atomic effective number increases with reinforcing ratio increases, and decreased with energy increasing. Specially with high concentrations (40, 50) % and at low energies E_γ < 0.662 MeV, Since the values of linear attenuation coefficient for shields which reinforcing by bismuth with concentrations (40%,50) was (2.1726, 3.661) respectively for 121.8 KeV, and for energy 344.3 KeV for same concentrations is (0.36521, 0.4005) respectively. The build up factor was found decreased with reinforcing ratio increases, with certain energy.As for the Half layer thickness and mean free path, it was found that the Half layer thickness decreased with energy increasing specially at high concentrations, as well as the Mean free path.Heaviness was calculated too for all shields with respect to lead, from its values, we found that this shields lighter than lead, which make it preferable to traditional material such as lead and concrete.As for the detector efficiency, it was found to be dependent on the type of shield material and the value of used energy which used. This study showed that there is good agreement between the experimental and theoretical values of total attenuation coefficients

دراسة الصفات الحرارية والميكانيكية وعمر الاداء PVC لبوليمر == Study of the Thermal, Mechanical Properties and Lifetime of PVC Polymer

اسم المؤلف: صهيب صباح احمد
اسم المشرف: وداد حمدي جاسم | محمد عبد النبي ثجيل
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: In this work, mechanical behavior of PVC product like pipes with different origins (K.S.A and Egypt) and Turkey doors with different manufacturing (Nova and Firat) which are used in Iraqi markets were studied.The objective of this work was to study the mechanical properties like ultimate tensile strength, Young's modulus, elongation at Max., elongation at break, impact strength, flexural strength and hardness of the pipes and doors.The experimental results show that K.S.A pipes exhibited maximum ultimate tensile strength and Young's modulus than that the Egypt pipes.However, the Egypt pipes exhibited maximum elongation at Max. and elongation at break when compared with K.S.A pipes.All the tensile properties of Firat doors are greater than that of Nova doors.Comparison of the flexural strength of pipes and doors. The pipes have the same flexural strength but the Firat doors have maximum value than Nova doors.Egypt pipes have a higher impact strength than K.S.A pipes. While the Firat doors have a higher impact strength than Nova doors. The experimental results of hardness Shore D indicated that K.S.A pipes exhibited maximum hardness number (83.7) than Egypt one, while the Firat and Nova doors have the same values.In this study, thermal properties of Firat and Nova have been evaluated, firstly by thermal conductivity and second by thermal stability and degradation. The Firat doors have better thermal conductivity than that of Nova doors. From the thermogravimetric analysis at different heating rates (2, 5, 10, 20 and 40 °C/min). The Firat doors have a higher thermal stability than Nova one.The Egypt pipes exhibited more thermal stability than the K.S.A pipes.From the TGA curves the activation energy of pipes and doors are determined at different conversion levels. At 30% conversion level when the mechanism of degradation would be stable and the value of activation energy of Egypt pipes and Firat doors is (108.35 KJ/mole) when it is (101.39 KJ/mole) for K.S.A pipes and (98.35 KJ/mole) for Nova doors. Thermogravimetric analysis (TGA) provides a method for accelerating the lifetime testing of polymers so that short - term experiments can be used to predict in use lifetime.The lifetime is decreased with increase of the temperature, at fixed temperature like 70 °C the lifetime of Egypt pipes is (≈100 years) while lifetime of K.S.A pipes is (≈21 years). At the same temperature (70 °C) the lifetime of Firat doors is (≈72 years) while the lifetime of Nova doors is (≈21 years).Thermomechanical analysis (TMA) test showed the glass transition temperature (Tg) and softening point (Ts) for pipes and doors. The K.S.A pipes have value for Tg and Ts higher than that of Egypt pipes, while the Firat and Nova doors have the same values.

التركيب المورفولوجي والخواص البصرية لاغشية In2O3 الرقيقة == Morphology Structural and Optical Properties of In2O3 Thin Films

اسم المؤلف: شيماء احمد كاظم
اسم المشرف: علية عبد المحسن شهاب
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يتناول هذا البحث دراسة تاثير تغير زمن الاكسدة ودرجة حرارة التلدين على الخصائص التركيبية والبصرية لاغشية اوكسيد الانديوم الثلاثي (In2O3) الرقيقة التي تم تحضيرها بتقنية التبخير الحراري في الفراغ ، حيث تم ترسيب معدن الانديوم (In) على قواعد من الزجاج واخرى من السليكون بدرجة حرارة الغرفة (300 K) وبسمك (400 ± 10 nm) وبمعدل ترسيب 5.47 ± 0.5 nm/sec)) ، ومن ثم اكسدة اغشية (In) المحضرة حراريا بدرجة حرارة (673 K) وبوجود الهواء وبزمن مختلف (ساعة ، ساعة ونصف ، ساعتان) ، بعد ذلك تم اجراء التلدين بدرجات حرارة مختلفة K (323 , 373 , 423) على اغشية (In2O3) المؤكسدة بزمن ساعة واحدة باعتبار ان هذا الزمن هو افضل زمن اكسدة من ناحية قيم فجوة الطاقة البصرية والحجم الحبيبي والخشونة ومعدل الخشونة . درست الخصائص التركيبية للاغشية المحضرة (قبل التلدين وبعده) عن طريق تقنية حيود الاشعة السينية (XRD) التي اظهرت ان هذه الاغشية ذات تركيب بلوري متعدد ومن نوع مكعب ، وكذلك تم استخدام مجهر القوة الذرية (AFM) والمجهر الالكتروني الماسح (SEM) لدراسة طوبوغرافية السطح من ناحية التجانس والخشونة ومعدل الخشونة . درست الخصائص البصرية للاغشية المحضرة (قبل التلدين وبعده) باستخدام المطياف البصري (Optical Spectrometer) ، حيث تم حساب فجوة الطاقة البصرية والتي كانت ذات قيمة اقل عند زمن اكسدة ساعة وعند درجة تلدين (323 K) ، بالاضافة الى دراسة طيف كل من الامتصاصية والنفاذية والانعكاسية ، وايضا تم حساب الثوابت البصرية وهي : معامل الامتصاص ، معامل الانكسار ، معامل الخمود ، ثابت العزل بجزئيه الحقيقي والخيالي كدالة لطاقة الفوتون ، وقد بينت النتائج ان زيادة قيم هذه الثوابت متعلقة بزيادة زمن الاكسدة ودرجة حرارة التلدين. | This research examines the effect of changing time of oxidation and the degree of annealing temperature on the structural and optical properties of membranes dioxide triple indium (In2O3 thin) that was prepared technology thermal evaporation in a vacuum, where the deposition of metal indium (In) on the glass and silicon substrate at room temperature (300 K) and thickness (400 ± 10 nm) and the rate of deposition of (5.47 ± 0.5 nm / sec) , and then oxidation films (In) prepared thermally and the presence of air at a different (hour, hour and a half, two hours) , then annealing was performed at different temperatures (323, 373, 423) K films (In2O3) oxidizing a time of one hour, considering that this time is the best time of antioxidants in terms of optical energy gap and grain size and roughness values and the rate of roughness . Structural properties of prepared films have been studied (before and after annealing) by X - ray diffraction technique (XRD) which showed that these films with the structure of crystalline multi it cubic type, as well as the use of an atomic force microscope (AFM) and electron microscopy scanner (SEM) to study the topography of the surface in terms of homogeneity and roughness and the rate of roughness . Optical properties of prepared films have been studied (before and after annealing) using the optical spectrometer, where the optical energy gap , and which were less valuable when oxidation hour time account and at a temperature annealing (323 K) , in addition to the study of spectrum both absorbance and transmittance and reflectivity , and was also the optical constants account : the absorption coefficient, refractive index, extinction coefficient, dielectric constant real and imaginary as a function of photon energy, the results have been shown to increase the values of these constants related to increased oxidation time and the annealing temperature.

دراسة تاثير خطوط الضغط العالي على تراكيز غاز الرادون في الهواء باستعمال كاشف الاثر النووي CR - 39 == Study of The Effect of High Voltage Power Lines on Radon Concentrations in Air Using Solid State Nuclear Track Detector CR - 39

اسم المؤلف: زينة جميل رحيم عبد علي
اسم المشرف: خالد هادي مهدي العبيدي | ندى فاضل توفيق
الموضوع العام: علوم الفيزياء
السنة: 2009
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يتضمن الهدف من البحث دراسة تاثير خطوط الضغط العالي 132kV)و400kV ) في مناطق منتخبة من مدينة بغداد على تراكيز الرادون ونواتج انحلاله باستعمال كاشف الاثر النووي CR - 39. تم توزيع عدد من الكواشف بابعاد (2x1cm²) ولمدة شهر كامل داخل وخارج محطتي بوب الشام 400kV والوزيرية 132kV , كذلك في عدد من الدور السكنية القريبة من خطوط الضغط العالي 132kV ومحطة المعري 132kV القريبة من منطقة العدل ببغداد خلال فصل الخريف. تم تحديد تراكيز الرادون خلال المقارنة مع العينات القياسية، ومن خلال النتائج المستحصلة كانت قيمة المعدل الموزون لتراكيز الرادون داخل الابنية تحت تاثير خطوط الضغط العالي 400kVهي 91.77±0.1122Bq/m³)) وفي الخارج كانت مساوية الى (125.73± o.117 Bq/m³) وتحت تاثير خطوط الضغط العالي 132kV في الداخل كانت مساوية الى 60.03± 0.266 Bq/m³)) اما في الابنية البعيدة عن خطوط الضغط العالي فقد كانت مساوية الى Bq/m³) 23.265± 0.77) وفي خارج الابنية 13.63± 0.99 Bq/m³)) يتضح خلال نتائج الدراسة ارتفاع تراكيز غاز الرادون في المناطق القريبة من خطوط الضغط العالي وبشكل ملحوظ مقارنة مع المناطق البعيدة عن الخطوط مما يدل على ان هناك تاثيرا واضحا لخطوط الضغط العالي على تراكيز غاز الرادون ويزداد هذا التاثير بزيادة شدة المجال الكهرومغناطيسي والقرب من هذه الخطوط, كما كان لخطوط 400kV تاثير اقوى من خطوط 132kV على تراكيز الرادون في الهواء, اما تراكيز غاز الرادون داخل الابنية فكانت اعلى من تراكيزه خارج الابنية , وهذه الزيادة في التركيز تعود الى ان جدران الابنية تعد المصدر الرئيس لتوليد الرادون داخل الابنية , حيث تبين ان مواد البناء قد ادت دورا مهما في زيادة تراكيز غاز الرادون داخل الابنية بالاضافة الى عمر الابنية والارتفاع عن مستوى سطح الارض . | The aim of this research the study of the effect of high Voltage power lines (400kVand132kV) upon radon concentration and its decay results by using nuclear track detectors CR - 39 inside Baghdad city. A number of detectors with the dimensions (2x1cm2) was scattered for a whole month indoor and outdoor Bob Al - sham station 400kV and Al - waziriya station 132kV as well as in number of the houses which are very close from the high voltage power lines 132kV and Al - maary 132kV during autumn. The concentrations of radon were determined through the comparison with the standard samples , The results shows that the value of Weighted Average of radon concentration indoor the buildings which are under the effect of high voltage 400kV is (91.77 ± 0.117Bq/m3) and under the effect of high voltage lines 132kV indoor is equal to (60.03±0.266Bq/m3) ,As for the buildings which are far away from the high voltage lines , it was equal to (23.2651± 0.773Bq/m3) and outdoor the buildings (13.63±0.99 Bq/m3) . The results showed that increase of radon concentration in the areas which are close to high voltage power lines compared with areas which are far away from the lines which show that there is a clear effect of high voltage power lines upon the concentration of radon . And this influence increases with increase of the intensity of electromagnetic field as well as the near distance with these lines .For there was a stronger effect of 400kV lines than 132kV lines upon radon concentration in air, Also the concentration of radon gas indoor the building were higher from its concentration outdoor the building . And this increase in concentration is due to the fact that the walls of the buildings are considered to be the main source for generating radon indoor the building as well

تقييم المقاطع العرضية لليورانيوم للتفاعلات المستحثة بالنيوترون == Cross Sections Evaluation of Uranium for Neutron Induced Reactions

اسم المؤلف: روناك اكرام علي
اسم المشرف: ايمان طارق العلوي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: لقد تم في هذا البحث حساب قيم المقاطع العرضية لنظائر اليورانيوم (A=230 - 238) للتفاعلات المستحثة بالنيوترونات التالية ,,,(n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), (n,γ), (n,p), (n,t), (n,d), (n,α), (n,2α),and (n,2p)المقاسة بفترات مختلفة من الطاقة حيث ان هذه القراءات تم اخذها من الوكالة الدولية للطاقة الذرية (IAEA ) ومن المكتبات المشهورة عالميا مثل EXFOR, CINDA, ENDF, JEFF, JENDL,ROSFOND,CENDL,WIND, TENDL, BROND, IRDF, EAF وقد تم قياسها في الفترة الاولى من منتصف القرن الماضي وحتى اخر سنوات الماضية .لقد تم تحليل المديات الكاملة للطاقة لكل تفاعل وقد تم اعادة حساب وتقييم المقاطع العرضية ضمن فترات صغيرة مختلفة حسب مديات الطاقة للنيوترون القاصف مع الاخطاء المرافقة لها. قد تم وضع صيغ رياضية لمتعددة الحدود في معظم التفاعلات والتي تربط بين تغيير المقطع العرضي مع الطاقة والتي يمكن استخدامها للتنبىء بقيم المقاطع العرضية غير المحسوبة. لقد تم حساب قيمة Q - للتفاعل وطاقة الربط وطاقة العتبة وفرق الكتلة وعامل الرص لكل تفاعل ولكل عنصر هدف. ان التقييمات اعتمدت بشكل رئيسي على حسابات نموذج الجهد البصري لقد اعتمدت الحسابات على معاملات الجهد البصري النووي حيث تم اختيار وجمع المعلومات من مكتبة (RIPL) التابعة للوكالة الدولية للطاقة الذرية. لقد قمنا بدراسة صيغتين مختلفتين لنموذج الجهد البصري حيث ان الصيغة الاولى تسمى نموذج الجهد البصري القياسي والمعاملات ماخوذة من مكتبة Beijing والصيغة الثانية لنموذج الجهد البصري قد تم حسابها بتحديد ثلاث مديات طاقية. لقد قمنا بدراسة نسبة التفاعل (n,f) لكل نظير من نظائر اليورانيوم نسبة الى يورانيوم - 235 والذي يعتبر نموذج قياسي. لقد قمنا بحساب هذه النسبة لجميع التفاعلات المتوفرة لدينا وليس فقط تفاعل الانشطار واحتسبناها نسبة الى يورانيوم - 235.حساب اخر تم اضافته الى هذه الدراسة وهو دراسة تاثير التلوث لوليدة اليورانيوم - 237 والتي هي نبتونيوم - 237 بعمر نصفي 6.8 يوم وكذلك حساب الفيض النيوتروني لكل منهما. | The cross sections of Uranium isotopes (A=230 - 238) for the (n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), (n,γ), (n,p), (n,t), (n,d), (n,α), (n,2α),and (n,2p) reactions are calculated with different energy intervals which are collected from International Atomic Energy Agency (IAEA). The available cross sections data for the reactions mentioned above are collected from the well known international libraries like EXFOR, CINDA, ENDF, JEFF, JENDL, ROSFOND, CENDL, WIND, TENDL, BROND, IRDF, EAF and measured during the period from the middle of the last century up to several years ago.The cross sections are reproduced in fine steps of incident neutron energy in different intervals with the corresponding errors. The recommended cross sections for all available experimental data have been calculated for all considered reactions mathematical representative equations for all these reactions are formulated. These equations represent the variation of the cross section with energy, which could be used to predict the values of uncalculated cross sections.Q - value, threshold energy, binding energy, mass excess, and packing fraction for each reaction and target element have been also calculated.The evaluations are based mainly on the calculations of the optical model potential. The calculations are based on the nuclear optical potential, where the relevant parameters are collected and selected from Reference Input Parameter Library (RIPL) which is being developed under the international project coordinated by the International Atomic Energy Agency (IAEA). We study two different formula for optical model potential the first formula is the standard optical potential model and its parameters are taken from Beijing library. The second formula is the optical potential with different energy ranges. We study the ratio of the (n,f) cross sections for each Uranium isotopes relative to (n,f) cross section for U - 235 which could be considered as a standard sample. We have done the ratio not for the (n,f) cross sections only but also for other reactions like ,(n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), and (n,γ) relative to U - 235 reactions cross sections.Another evaluation is added to cross sections is the effect of the contamination of the daughter of U - 237 which the daughter is Np - 237 6.8day and their relative flux

دراسة تاثير المعاملة الحرارية على الخواص التركيبية والميكانيكية لبوليمر (بولي تيترافلورواثيلين) == Study the Effect of Heat Treatment on the Structural and Mechanical Properties for poly (tetrafluoroethylene

اسم المؤلف: رند باسم لطفي الكرخي
اسم المشرف: مي عبد الستار محمد نجيب
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: درس في هذا العمل نوعين من بولي تيترافلورواثيلين ( النقيين ولكن باختلاف الشركة المصنعة PTFE) (صيني _اماراتي ) بطريقه صب المحلول كافلام رقيقه واشرطة , بواسطه الخواص التركيبيه (حيود الاشعه السينيه ومسعريه المسح التفاضلي ) والخصائص الميكانيكية بدلاله درجات حراره مختلفة للدوره الحرارية . يبين كلا النوعين تغير في الشده المستطاره من المستوى القاعدي (100) عند تغير درجه حرارة الدورة الحرارية واظهر النوعين زيادة في التبلورية مع زياة درجة الحرارة .كذلك اختلاف في الانثالبي عند اختلاف درجات الحرارة حيث لوحظ زياة الانثالبي بزيادة درجة الحرارة واختلاف في الخصائص الميكانيكيه ( الاجهاد والانفعال عند نقطة الخضوع ونقطه الكسر ومعامل يونك) للبوليمر حيث اظهرت المعالجة الحرارية للبوليمر بدرجات حرارة مختلفة من اجل معرفة خصائصه ومقاومته الى الظروف البيئية ان الخواص الميكانيكية تزداد زيادة خطيا مع زيادة درجة الحرارة .لوحظ بان انتاج الشركه المصنعة الصينية افضل من ناحية النتائج لايجاد درجة التبلورية والخصائص الميكانيكيه عن انتاج الشركة المصنعة الاماراتية لنفس المادة البوليمرية | In this study two modifications of pure polytetrafluoroethylene (PTFE) [C2F4]n. China_UAE source prepared from solution cast as film and strip have been studied by structural (X - ray diffraction (XRD), Differential Scanning Calorimetry (DSC)) and mechanical properties .subjected to different temperature heating cycle. Both modifications show variation in the scattered X - ray intensity of the basal plane (100) as the temperature of heating cycle is changed and show increasing in crystallinity with the increase of temperature .Moreover, the Enthalpy of each kind is changed with difference of heat treatment where the enthalpy increase with the increase of temperature, and two modifications show different in mechanical properties for PTFE (young's modulus, stress at break, stress at yield, elongation at yield. And elongation at break) when the temperature is change ,The heat treatment of polymer to different temperatures in order to know its properties and resistance to environmental conditions results showed that the mechanical properties increase linearly with the increase of temperature.It seems that the product company of china is better than the product company of UAE in degree of crystallinity and mechanical properties for this polymer.

الدراسه النظريه لتصميم ماكنه بؤره البلازما وتحقيق العوامل المختلفه التي تؤثر على حصيله النيترون المنبعث == Theoretical study to design plasma focus machine and investigate various parameters that affect its emitted neutron yield

اسم المؤلف: رنا عيســـى بــك مــــراد
اسم المشرف: مصطفى كامل جاسم | رعد حميد مجيد
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: فيزياء البلازما
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا البحث تم تصميم جهاز بؤرة البلازما الكثيفة نظريا بالاعتماد على موديل (لـــي) بناءا المعادلات الرياضية لنموذج لي لكل من هندسة القطبين وعناصر الدائرة الخارجية التي تضم متسعة ومحاثة ومقاومة (RLC). وبعد اجراء الحسابات اللازمة تم ادخال نتائج التصميم في برنامج لرؤية مدى امكانية تشغيله نظريا من خلال دراسة المعلمات المختلفة التي يوفرها البرنامج وبالتالي التعرف على ظروف تشغيله والعوامل المؤثرة عليه. لقد اختير غار الديترويوم كغاز عامل في هذه المنظومة للحصول على ناتج نيتروني من اجل التفاعل النووي الاندماجي. وتم اختبار ودراسة المنظومة عند ضغطين مختلفين (3و4 تور) حيث درست مختلف معلماتها التي يوفرها البرنامج ونوقشت وقورنت النتائج بالاشكال البيانية. اضافة لذلك تمت مقارنة المنظومة المصممة مع منظومة قياسية تناظرها من حيث التركيب النظري وهي منظومة NX2 التي بنيت اساسا للحصول على الاشعة السينية باستعمال غازات النبيلة. اختير في البحث ان يكون غاز الديتريوم هو الغاز العامل للحصول على ناتج نيتروني من اجل المقارنة، حيث درست جميع معلمات التشغيل للمنظومة المصممة مع القياسية بالرسوم البيانية.لقد وجد من خلال انجاز الحسابات اللازمة بان الشكل البياني لانحدار تيار الانبوب الكلي (dip) مباشرة بعد قمة التيار مع الزمن للمنظومة المصممة متفق تماما مع الشكل العام المميز لمنظومات بؤرة البلازما التجريبية دلالة على ان حسابات التصميم صالحة لهذه المنظومة وبالتالي يمكن اجراء الحسابات. ان تصرف فولتية الانبوب مع الزمن للمنظومة المصصمة كان بنفس الشاكله مع المنظومة القياسية. وينطبق هذا على سلوك المعلمات الاخرى بين المنظومتين مثل السرعة والمسار المحوريان والمسار الى الداخل للصدمة الشعاعية ومسار وسرعة استطالة القرص ومسار وسرعة الصدمة المنعكسة شعاعيا وغيرها.تم دراسة ومقارنة تغيرات درجة حرارة البلازما مع الزمن للمنظومتين عند نفس الضغط ولضغطان مختلفان للمنظومة المصممة وكان تصرف ماكنتا بؤرة البلازما بنفس الطريقة. وتم حساب الخسائر المتولدة من الماكنتان مثل خسائر جول وبرمنشتهالنك واعادة الاتحاد وخسائر الطاقة الشعاع الخطي مع الزمن. اخيرا وجد ان المنظومة المصممة ( 1.66 × neutron per shot ) توفر ناتج نيتروني اكبر من المنظومة القياسية (5.15 × neutron per shot) . لقد تصرفت المنظومة المصممة مثل المنظومة القياسية لكن كان الاختلاف في سلوك المنظومة المصممة والقياسية هو اختلاف الترتيب الهندسي للمنظومتين من حيث هندسة الاقطاب واختلاف قيم العناصر الكهربائية للدائرة الخارجية. ان المنظومة المصممة نظريا في هذا البحث يمكن ان تكون مشروع لبناء ماكنة بؤرة بلازما تطبيقية للحصول على ناتجها النيتروني العالي للاستفادة منه في اجراء تفاعل الاندماج النووي.

دراسة الخواص البصرية والكهربائية لمتراكبات PMMA/ اكسيد المعادن == Study the Optical and Electrical Properties of PMMA/Metal Oxide Composites

اسم المؤلف: رسل طه حسين
اسم المشرف: رغد صبحي الخفاجي
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يهدف هذا البحث الى تحضير متراكبات ثلاثية هجينة من PMMA مقواة بجسيمات TiO2 - Al2O3 وZrO2 بتقنية الصب .تم استخدام كسور وزنية (84 - 92) wt % من بولي ميثيل ميثا اكريلك ونسبة ثابتة % (4) من تيتانيا مع نسب وزنية تتراوح بين wt % (4 - 12) للالومينا والزركونيوم. تم دراسة المواصفات التركيبية من خلال حيود الاشعة السينية ومجهر القوة الذرية. بينت فحوصات صور مجهر القوة الذرية تجانس في البناء البلوري. اما الخواص العزلية فقد فحصت من خلال قياس ثابت العزل عند مدى تردد (102 - 106) Hz وبينت النتائج ظهور تاثير طفيف عند اضافة الالومينا للمتراكب الهجيني (PMMA - TiO2 - Al2O3) مقارنة بمضاف الزركونيوم للمتراكب الهجيني (PMMA - TiO2 - ZrO2) حيث قيم ثابت العزل تزداد مع زيادة التركيز (3.408500 - 10.69851). في حين يتناقص عامل الفقد بزيادة التردد للمتراكبات (PMMA - TiO2 - Al2O3)و(PMMA - TiO2 - ZrO2) . قيست التوصيلية الكهربائية المستمرة لمدى درجات حرارية تتراوح بين ( 313 - 373 )K ولوحظت زيادة في القيم التوصيلية بزيادة التركيز ودرجة الحرارة (5.5E - 10 - 8.52E - 10) (Ω.m) - 1 في حالة الزركونيوم المضاف للمتراكب الهجيني. تم حساب الثوابت البصرية للعينات المحضرة كدالة للطول الموجي وذلك باستخدام مطياف بمدى nm( - 1100200). حيث تم حساب معامل الامتصاص، معامل الخمود، معامل الانكسار وفجوة الطاقة البصرية, ومن حساب النتائج نلاحظ ان قيم معامل الامتصاص ومعامل الخمود ومعامل الانكسار لل(PMMA - TiO2 - Al2O3) اعلى من (PMMA - TiO2 - ZrO2) كدالة للطول الموجي، نلاحظ ايضا، انخفاض في قيم فجوة الطاقة البصرية المسموحة eV (2.90 - 2.50) في متراكبات الالومينا بينما من (2.90 - 2.58) eV للزركونيوم. وكذالك فجوة الطاقة البصرية الممنوعة (2.85 - 2.48) eV الكترون فولت للالومينا بينما eV (2.85 - 2.52) للزركونوم . | This study aims to synthesize ternary hybrid composites PMMA polymer matrix with TiO2, Al2O3 and ZrO2 as additives using casting technique. the weight fractions of matrix with range (84 - 92) wt %, fixed percentage (4) % of TiO2 and range of weight fractions with range (4 - 12) wt % of Al2O3 and ZrO2 were used as started materials. Characterization properties were examined through XRD and AFM. Obtained micrograph and XRD revealed homogeneity structure for Al2O3 filler. Dielectric properties such as dielectric constant were carried for range (102 - 106) Hz frequency .The addition of Alumina filler exibits slightly effect on dielectric constant values for prepared ternary hybrid composite (PMMA - TiO2 - Al2O3 ) compared with ZrO2 for ternary hybrid composite (PMMA - TiO2 - ZrO2) where dielectric constant increases as concentration increases (3.408500 - 10.69851) . Dissipation factor decreases with increasing frequency in composite (PMMA - TiO2 - Al2O3) and (PMMA - TiO2 - ZrO2). DC electrical conductivity was conducted in temperature range ( 313 - 373 )K. Markedly increasing for the DC electrical conductivity of Zirconia filler with respect to additional concentration (5.5E - 10 - 8.52E - 10) (Ω.m) - 1 .Otherwise DC electrical conductivity increases versus applied temperature for both prepared composites. Optical constants (extinction coefficient, absorption coefficient, and Index of refraction), optical energy gap were obtained for prepared Specimens as function of wavelength using spectrometer at range (200 - 1100)nm. It was noticed that the values of extinction coefficient ,coefficient of absorption , and refractive index for (PMMA - TiO2 - Al2O3) are higher from that of (PMMA - TiO2 - ZrO2) as wavelength, also, more decreasing in allowed optical energy gap values from (2.90 - 2.50 eV) for Al2O3 filler and from (2.90 - 2.58 eV) for ZrO2 as additive. Also forbidden optical energy gap decreases in case Al2O3 from(2.85 - 2.48) eV while from (2.85 - 2.52) for ZrO2 as additive.

دراسة التركيب المتهيج للنوى زوجية - زوجية ذات العدد الذري Z= 50, 48, 46 في المستوى المتهيج الاول == Study of Excited Structure for Even - Even Nuclides of Z = 50, 48, 46 in The First Excited State

اسم المؤلف: رسل سعد هادي
اسم المشرف: فاطمة عبد الامير جاسم
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: درست الخواص الكهرومغناطيسية للنظائر زوجية - زوجية للنوى 48Cd , 50Sn و46Pd الغنية بالنيوترونات من خلال قوى الانتقال لرباعي القطب الكهربائي |M(E2)|2 W.u ↓ واحتمالية الانتقال المختزل B(E2)W.u ↓ لانتقال اشعة كاما من المستوى المتهيج الاول الى المستوى الارضي. حيث تم حساب قوى الانتقال لرباعي القطب الكهربائي |M(E2)|2 W.u ↓ بالاستعانة بمعدل العمر للمستوى المتهيج الاول والشدة النسبية لاشعة كاما المنبعثة من ذلك المستوى, بينما قيم احتمالية الانتقال المختزل B(E2)W.u ↓ استخرجت من خلال عمر النصف للمستوى المتهيج الاول المصحح لمعامل التحول الداخلي.وللحصول على قيمة دقيقة لانتقال رباعي القطب الكهربائي ↓ E2, تم حساب ورسم القيم المتبناة لكل من |M(E2)|2 W.u ↓ وB(E2)W.u ↓ كدالة لعدد النيوترونات.في هذا البحث, تم تحويل القيم المتبناة لانتقال ↓E2 الى قيم احتمالية الانتقال المختزل B(E2) ↑ e2b2 والتي افادتنا في دراسة تركيب النوى من حيث الاختلاف في الشكل لان عامل التشوه β تم استخراجه من B(E2) ↑ e2b2, كما ان دراسة تاثير عدد النيوترونات على سلوك كل من B(E2) ↑ e2b2 وβ في المتسلسلات الايزوتونية لنوى 48Cd , 50Sn و46Pd يعطي معلومات جيدة حول التشوه في النوى.تركزت دراستنا على ثلاث انواع مختلفة من النوى, الاول بعدد ذري سحري50 , والثاني بعدد ذري شبه سحري 48, والثالث بعدد ذري بين القشرات المغلقة 46.في نهاية العمل الحالي تم عمل مقارنة جيدة للحسابات الحالية لقيم احتمالية الانتقال المختزل B(E2) ↑ e2b2 وعامل التشوه β مع معظم القيم العملية والنظرية الحديثة. | Electromagnetic properties for even - even nuclides in neutron - rich nuclei such 50Sn, 48Cd and 46Pd have been studied through the electric quadruple transition strength |M(E2)|2 W.u ↓ and the reduced transition probability B(E2)W.u ↓for γ0 - transition from first excited state to the ground state. The electric quadruple transition strength |M(E2)|2 W.u ↓ is calculated by using life - time for excited state with the intensity of γ0 - transition, while B(E2)W.u ↓ is extracted from half - life time to state corrected for internal conversion coefficient. To obtain precise value for the transition of E2↓, the adopted value for |M(E2)|2 W.u ↓ and B(E2)W.u ↓ was calculated and plotted as a function for neutron number. In present work, the adopted values for the transition of E2↓ are converted to B(E2)exp ↑ e2b2 which helped us to study the structure for nucleus, such as the variation in shape, because the deformation parameter β is extracted from B(E2) ↑ e2b2 and the study for behavior of each of B(E2) ↑ e2b2 and β versus neutron number in isotonic chains to 50Sn, 48Cd and 46Pd gives good information about the deformation in nuclei. Our study focused on the three different types of nuclei, the first with atomic magic number 50, the second with semi - magic atomic number 48 and the third nucleus with atomic number between closed shells 46. At the end of the present work, the good comparisons for the present calculation to the values of the B(E2) ↑ e2b2 and β with most recent values of experimental and theoretical was done.

تحضير ودراسة سلوكيات الرص لمتراكبات (الومينا - المنيوم) == Preparation & Studying the Compaction Behaviors of the (Alumina - Aluminum) Composite

اسم المؤلف: حنان جميل مصطفى
اسم المشرف: عبد الحميد رحيم مهدي الصراف
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم تحضير المتراكب السيرميتي (سيراميك - معدن) من مادة الالومينا (Al2O3 - γ( كمادة اساس، ومن معدن الالمنيوم (Al) كمادة تدعيم، لتراكيز مختلفة من الالمنيوم (0 - 50)%، ونسبة زيادة التدعيم 10)%).تمت عملية التشكيل باستعمال الضغط باتجاه واحد، وانجزت عملية التلبيد في جو مفرغ من الهواء. درست سلوكيات الرص بحالة التلبيد الصلبة عند درجات حرارة التلبيد (400، 450، 550) م° ، وازمان التلبيد (2، 4، 6) ساعات، وعند ضغوط تشكيل (50، 100، 150) بار، تم الحصول على افضل الخواص الفيزيائية عند (550م°، 2ساعات، 150ساعة). تمت دراسة حالة تلبيد الطور السائل كدالة لتغير نسبة الالمنيوم في المتراكب عند (800م°، 2ساعة، 150بار)، بناء على ما تم التوصل اليه من خواص فيزيائية جيدة عند حالة التلبيد بالطور السائل، اختيرت هذه المواصفات لدراسة تاثير تغير الضغط عند (50، 100، 150) بار على الخواص الفيزيائية للمتراكبات السيرميتية المحضرة. اظهرت السلوكية عند المنطقة التي تحتوي تركيز الالمنيوم (40 - 50)% افضل الخصائص الفيزيائية، تبعا لذلك، درست اغلب القياسات على التركيز صاحب نسبة 50% من مادة الالمنيوم. المفهوم الاساسي الذي تضمنته هذه الدراسة هو التلاصق الفيزيائي بين مكونات المتراكب السيرميتي المحضر، والذي كان واضح من فحص انحراف الاشعة السينية. كذلك من الفحص المجهري (SEM) نلاحظ ان المتراكب النهائي (السيرميتي) المحضر اشبه الى ما يكون جزر موصلة (مادة الالمنيوم) مفصولة بمناطق عازلة (مادة الالومينا) وهذا ناتج بفعل التلاصق الفيزيائي. لوحظ ان زيادة نسبة الالمنيوم للمتراكبات المحضرة يلعب دورا مهما في الخواص الفيزيائية والكهربائية والتي تم مناقشتها بالتفصيل، وكذلك حسن من قيمة الصلادة للمتراكبات المحضرة، حيث ان التوزيع العشوائي لدقائق الالمنيوم ضمن مادة الالومينا، كون اقرب الى ما يكون الى شبكة داخلية معدنية زادت من متانة المتراكب المحضر من خلال ملء المسامات الموجودة غالبا بسبب مادة الالومينا الهشة. من خلال هذه الدراسة توصلنا الى ان المتراكب المحضر له نسبة مسامية عالية والتي يمكن توظيفها في صناعة فلترات الوقود. كما يمكن توظيف الخواص العزلية المحسنة التي توصلنا اليها في صناعة المتسعات السيرميتية (cermet capacitors )، كذلك من خواص مقاومة البلى التي توصلنا اليها، ممكن توظيفها في تصنيع ادوات القطع والبرد بعد اجراء التحسينات اللازمة. | A cermet (ceramic - metal) composite have been prepared from alumina ceramic (γ - Al2O3) as a matrix and from aluminum metal (Al) as reinforcement, prepared for different concentrations of aluminum (0 - 50)%, the reinforcing increment is (10%).The forming process was done by single action pressing, and the sintering process was done in vacuum atmosphere.The compaction behaviors of prepared cermet bodies were studied in solid state sintering, at sintering temperatures (400, 450, 550) °C, sintering times (2, 4, 6) hrs. and forming pressures (50, 100, 150) bar, the best physical properties were gained at (550 °C, 2hrs., 150bar).Liquid phase sintering process was studied as a function of Al percent in the composite at (800 °C, 2 hrs., 150 bar). According to the interesting physical properties we gained from liquid phase sintering process, these parameters were chosen to study the effect of the forming pressure ((50, 100, 150) bar) on the physical properties of the prepared cermet bodies. The behavior at the region that have aluminum concentration (40 - 50)% showed the best physical properties, according to this, most of the measurements were studied on the concentration of 50% of aluminum material. The basic concept of this study is the physical adhesion between the material particles of the prepared cermet bodies, which was obvious from the XRD tests. Also from the SEM micrograph we have notice the final structure of the prepared cermet, which is more like conducting islands (aluminum) separated by isolated areas (alumina), which is a sequent of the physical adhesion action.Increasing of aluminum content in the composite materials prepared may play an important role in physical and electrical properties has been discussed in detail, also enhanced the hardness of the samples, where the random distribution of aluminum particles through the alumina material, makes more like internal web of metal, that helps to increase toughness of samples by filling the porosities existed because of the brittle alumina.From this study we noticed, we have relative high porosity that could be employed in fuel filters. Also we have fine dielectric properties that could inter the application of cermet capacitors. Also, we have reasonable wear result that can be employed in grinding and cutting tools after improvements have been done.

دراسة نظرية لمستويات طاقة النظائر ( - 2^6)[He] - 4 , ( - 9^18) F - 9 , ( - 15^30) P - 15 بالاعتماد على usda ,usdb ,usd باستخدام حسابات انموذج القشرة النووي == Theoretical study of energy levels for (_2^6)?He?_4 , (_9^18)F_9 and (_15^30)P_15 Isotopes depending on USDA,USDB and USD using shell model calculation

اسم المؤلف: ايوب طالب عبد داغر
اسم المشرف: احمد موسى اشويخ
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: باستعمال حسابات انموذج القشرة النووي لتقيم مستويات الطاقة . مصفوفة العناصر النووية للتفاعل المؤثر لنيوكليونين اشتقت لجهود USD,USDB,USDA لوصف التفاعل للنيوكليونات وفقا لفضاء انموذج التشكيل للنوى ولحساب طاقات الربط والتهيج النووي . ووفقا لنظرية الاضطراب حسبت طاقة المستويات على افتراض وجود نيوكليونين بروتون ونيوترون خارج القلب المغلق وصفت وفقا لجهود USD,USDB,USDA العالمية . الحسابات اتمت باستعمال طاقة الجسيمة المفردة لتفاعل النيوكليونات خارج القلب المغلق ولثلاث انظمة , طاقة المستويات حسبت اعتمادا على مبدا الاختيار للزخم الزاوي والبرم النظائري T=0,T=1 لدوال الموجة غير المتناظرة للنيوكليونات . نتائج الحسابات اتمت باستعمال حزمة الماتلاب لحساب مستويات الطاقة مع قيمة عملية ونظرية لطاقة الجسيمة المفردة ونتائج الحسابات قورنت مع القيم العملية لمستويات الطاقة ولوحظ توافق جيد مع القيم العملية | The nuclear structure for low lying energy states of isotopes (_2^6)He_4 , (_9^18)F_9 , and (_15^30)P_15 nuclei have been investigated and studied using shell model depending on the evaluation of the energy levels . Nuclear matrix elements for the effective interaction of two - nucleons have been derived for the USD,USDA and USDB potential to describe the interaction of the nucleons at configuration model space for nuclei to evaluate the binding and excitation energy. According to the perturbation theory , evaluation energy levels with assume two nucleons one proton and one neutron out the closed inert core. The interaction of the nucleons out the closed core describe by USD,USDA and USDB universal potential .the calculations have been performed using single particales energy for nucleons interactions out the closed core in three system.The energy levels are computed depending on the selection rule of angular momentum and the isospin T=1and T=0 for antisymmetric wave functions for nucleons. Their results has been employed using Matlab software to evaluate the energy levels with experimental and theoretical single particle energies. The results data are compared with experimental energy levels which show good agreement

دراسة نظرية للحاصل الفوتوني لتفاعل كوارك - كوارك == Theoretical Study of Photon Yield at Quark - Quark Interaction

اسم المؤلف: ايناس جاسم محسن ولي
اسم المشرف: هادي جبار مجيبل العكيلي
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تمت دراسة حاصل انتقال الفوتونات في تفاعل الكوارك - كوارك نسبة لتبادل الكلون وبدرجات حرارة عالية بالاعتماد على النظرية الكمية اللونية. انصبت هذه الدراسة على حساب معدل الانتقال الفوتوني والناتج بعملية الفناء للنظام الكواركي باستعمال نموذج بسيط لتفاعل الكوارك - كوارك وفقا للنظرية الكمية اللونية ونظرية الاضطراب باستخدام الاعتبارات الكمية. تم تحديد المعدل الكلي لانتقال الفوتونات الناتجة لعملية الفناء وحسابه كدالة لثابت الاقتران وزخم الانتقال وطاقة الفوتون ودرجة الحرارة الحرجة والطاقة الحرارية للنظام. احتمالية معدل انتقال الفوتون حسبت باستعمال قيمتين للطاقة الحرارية الحرجة Tc=144MeV وTc=170MeV مع عدد من قيم الطاقة الحراريةT=125MeV وT=188MeV وT=250MeV وT=310MeV نسبة الى زخم الانتقال. ان التقريب من الدرجة الاولى للنظرية الكمية اللونية ولفناء الكوارك - الكوارك المضاد تشير الى التباعد الاسي لمعدل الفوتونات العائدة لتفاعل كوارك - كوارك. وفقا لنظرية الاضطراب في درجات الحرارة العالية يتبين لنا تاثير الطاقة لتبادل الكلون على ظاهرتي كل من الحبس اللوني والتقارب الحر والتي توفر معدلات محددة. في هذه الاطروحة تظهر النتائج اثنين من السلوكيات المتميزة لتفاعل الكواركات وهي صفة الحبس والتقارب الحر اعتمادا على ثابت الاقتران. معدل الانتقال الفوتوني يزداد بتناقص ثابت الاقتران وبتناقص طاقة الفوتونات مع زيادة الطاقة الحرارية وانبعاث الفوتونات يكون كبير. من جهة اخرى فان معدل انتقال الفوتون يتناسب مع الطاقة الحرارية الحرجة ويزداد معدل انتقال الفوتون مع زيادة الطاقة الحرارية للنظام ويقل مع زيادة زخم الانتقال . | The transition of photons from a quark - quark interaction due to exchange gluon at high temperatures have been investigated and studied according on quantum chromodynamic theory QCD. This study focuses on the evaluation of the photon transition rate production in an annihilation processes for quarks system using a simple model of quark - quark interaction according on quantum chromodynamic theory and perturbation theory using a quantum consideration. Specifically, the total photons transition rate production at annihilation processes is evaluated as a function of the running strength coupling scaled ,momentum transfer P, photon energy E_γ, critical temperature Tc, and thermal energy T for system. The probability of photon transition rate ζ(α_s,E,T) have been evaluated using two values of critical temperature Tc =144 MeV, and Tc =170 MeV with many values of thermal energy T =125 MeV, T =188 MeV, T=250 and T =310 MeV relative to momentum transfer P=1 to 5 GeV. At first order approximation the quantum chromodynamic theory for quark - antiquark annihilation indicates to exponential divergent of photons yield rates for quark - quark interact. According to the perturbation theory at high temperature we show that effects of energy to the exchanged of gluon on the confinement and asymptotic freedom provide finite rates. In this thesis, results exhibit the two distinct behaviors of quarks state interaction which are described as confinement and deconfinement depending on the running coupling strength α_s (T). The rate transition of photons is increasing at decreasing of running coupling strength α_s (T) and decreases of the photon energy E_γ, with the increase of thermal energy T and emitting photon would be large. On the other hand the photon transition rate proportional to the critical temperature and the photon transition rate increase with the increase of the temperature and decrease with the decrease of momentum transfer

تشخيص ورم الكبد من الصور المقطعية باستخدام معالجة الصور الرقمية == Diagnosis of Liver Tumor from Computed Tomography Images using Digital Image Processing

اسم المؤلف: انتظار مالك هادي
اسم المشرف: علياء حسين علي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: معالجة الصور
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: This work aims to detect and diagnoses liver tumors from Computed Tomography images using digital image processing, this is a modern technique which depends on using computer in addition to textural analysis to obtain an accurate liver diagnosis, despite the method's difficulty that came from liver's position in the abdomen among the other organs. This method will enable the surgeon to detect the tumor and then easing treatment also it helps physicians and radiologists to identify the affected parts of the liver in order to protect the normal parts as much as possible from exposure to radiation. This work describes a new 2D liver segmentation method for purpose of segmented as a treatment for liver tumors. Liver segmentation is not only the key process for volume computation but also fundamental for further processing to get more anatomy information for individual patient. Due to the low contrast, blurred edges, large variability in shape and complex context with clutter features surrounding the liver that characterize the CT liver images. The method has been implemented in MATLAB and a Graphical User Interface was created. These imaging studies have contained a total of 22 CT images, including five Haemangioma, five Cyst, five Cirrhosis, five carcinomas and two healthy livers. Calculating the area of the abnormal part (tumor), an algorithm has been created to colored images depending on the boundary. The images have been transformed from RGB color space to HSV color space to identifying different colors in fabric by analyzing the HSV color space. This helps to separate abnormal part in to K - clusters. The method is very effective and gives the best result for classification process. Since it depend on the color of the texture and on the distance between the classes. The 2D segmentation process which is based on the hybrid method which is the combination of modified k - Mean (which depend on the distance and color), and the statistical structure which is the first order statistical feature. The statistical features are : Mean, Variance, Standard deviation, Skewness, Kurtosis, Energy and Entropy, and the geometrical feature which are area and the irregularity. These features together helps to diagnose the liver tumor and to classify these tumor

دراسة نظرية لليزر الليف البصري المطعم بالنديميوم == Theoretical Study for Neodymium - Doped Optical Fiber Laser

اسم المؤلف: امجد عبد الحميد سلمان
اسم المشرف: مظهر شهاب احمد
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: to find equation of lasing output power (Pout) by using the numerical emulation Secondly, calculating the (Pout) of Nd+3 - doped optical fiber laser as a typical example for the optical fiber laser, which is process according to this system. The required equations to calculate (Pout) was programmed by Matlab program (version8.1). Two types of hosts were used in this simulation, the first type is Silica with four designs using commonly in the above mentioned, the four designs are Lycom (a), Lycom (b), York and IVA with lasing emission at the wavelengths (1064×10 - 9m) and (1331×10 - 9m). The second type of hosts is ZBLAN with only one design is Le Verre fluore, with lasing emission at two wavelengths (1048×10 - 9m) and (1317×10 - 9m). The first step in this emulation was determining the value of numerical aperture (NA) for each design of special designs and at the special wavelengths for every host, which can obtain the highest values of lasing output power (Pout) and efficiency (η) at value of (NA).The second step was calculating the (Pout) corresponding to pump power (Po) for each host according to the designs and the wavelengths related to the host, In case of the host Silica, for the two wavelengths of this host, it is found that the (Pout) was the highest value when the design (York) was used, while in case of the host (ZBLAN), it is found the highest value of (Pout) is when using the wavelength (1048×10 - 9m). For addition that, it is found that to obtain the highest values of (Pout) and (η) for this type of laser, it must be use the host Silica at the wavelength (1048×10 - 9m). According to that, the third step was using this host and this wavelength to calculate the effect of the numerical aperture (NA), core radius (a), cladding radius (b), fiber length (L),reflection coefficients (R2), Nd+3 - dopant concentration in the core (No), lifetime of upper laser level (T2) and pump power (Po) on the (Pout). The changing of the above mentioned coefficients values was determinate with its range which is finding in four designs related to the host Silica. It is found that the value of (Pout) decreased with the increase of the values of (NA, a, b, L and No), while increase with the increase of the values of (R2 ,T2 and Po), through that, the optimal values of these coefficients which must be used to obtain the highest values of (Pout) and (η) for this type of laser.

حساب الحاصل النيوتروني للتفاعلات (?,n) و(p,n) لبعض النوى المتوسطة لمدى طاقي (50 - 100 MeV) باعتماد المعادلات شبه التجريبية == Neutron Yield Calculations for (?,n) and (p,n) reactions for Some Intermediate Nuclides in the Energy rang (50 - 100MeV)by using Semi - empirical formula

اسم المؤلف: اسيل عادل يوسف
اسم المشرف: خالد هادي مهدي العبيدي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ان اغلب المقاطع العرضية لاغلب النظائر المشعة تكون مفقودة عند طاقات معينه في المختبرات العالمية ، لذا تم استخراج مجموعة صيغ رياضية شبه تجريبية موحدة لحساب الحاصل النيوتروني بالاعتماد على العدد الكتلي للنظير وطاقة القذيفة ، اما طاقة منفردة او مدى من الطاقات . تم العمل على جمع بيانات المقاطع العرضية مقابل الطاقات للمدى (50 - 100 MeV)من المختبرات العالمية (Koning , A . J . ; TENDL - 2010 - 2012) لنوعين من التفاعل (α,n) و(p,n) مع نظائر اربعة عناصر( 33As, Fe26 , Mn25 ، (32Geلكل عنصر عشرة نظائر فيصبح مجموع التفاعلات اربعين تفاعل كما تم حساب قدرة الايقاف للبروتون ولجسيمة الفا بوساطة برنامج (SRIM - program - 2013)، ومن ثم حساب الحاصل النيتروني باستخدام برنامج (الماتلاب2008a)، وهو مصمم لهذا الغرض ، تم حساب طاقة اللاتناظر لكل نظير ومن ثم استخراج صيغ رياضية من خلال افضل عملية ملائمة (fitting) بين طاقة اللاتناظر والحاصل النيوتروني للتفاعل عند الطاقات (50,60,70,80,90,100 MeV) لاهداف نوى متوسطة مختلفة . وضعت المعلمات الاولية المستخرجة من الصيغ الرياضية في جداول ، ورسمت العلاقة بين كل مجموعة معلمات والطاقة المقابلة لها لغرض استخراج معادلات موحدة ، والتي من خلالها تم ادخال متغير الطاقة في المعادلة الاساسية المستخرجة ، وبعد رسم العلاقات وجدنا المقاطع العرضية للتفاعل (α,n) اصغر من التفاعل (p,n) ، وان الحاصل النيوتروني يزداد مع زيادة طاقة الجسيم الساقط وتناقص العدد الكتلي ، وان النتائج المحصلة من الصيغ الرياضية الجديدة المعتمدة على القيم العملية في تطابق جيد مع النتائج النظرية المنشورة . | cross sections for many reactions for most of isotopes with different energies in international laboratories were missed so we get a mathematical semi - empirical equations for calculating the neutron yield depending on mass number of target and projectile energy (single enrgy or range of energy ) . Data of cross sections were collected from international libraries (TENDL,Kong) from 2010 to 2012 for tow types of reaction (α,n) and (p,n) for energies (50 - 100MeV) with ten isotopes of (33As , 26Fe , 25Mn , 32Ge) elements , that is mean the total number of reaction will [40] reaction , then stopping power for proton and alpha particle were uese calculated using SRIM program 2013 then neutron yield was calculation using Matlab program 2008a designed for this purpose so as asymmetry energy for each isotope then by fitting relation of asymmetry energy with neutron yield for, the reaction at energies (50,60,70,80,90,100) MeV with intermediate nuclide we get . The parameters were tables and from their relations with energy we get final set of semi - empirical equations, then it was drown , we from this fingers we concluded that the cross sections for (α,n) reactions were less than (p,n) reactions and the neutron yield in cress with increasing the projectile energies and with decreasing of atomic number all the results that got from this new semi - empirical equations that we got from experiment data was in good agreements with published the data .

عزل وتشخيص بعض انواع البكتريا المكسرة للهيدروكاربونات النفطية الاليفاتية في الترسبات النفطية لمحافظة البصرة == Isolation and Identification of some species of degradable Bacteria of N - Alkanes hydrocarbons compounds in oil sludge at Basrah Governorate

اسم المؤلف: استبرق عبد الحسين سلمان جدي البوغازي
اسم المشرف: ميثم ايوب عبد القادر الحمداني
الموضوع العام: علوم الحياة
السنة: 2015
الموضوع الدقيق: الاحياء المجهرية
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: In the oil industries, large amounts of oil sludge are generated through the refining of crude oil. The main reason for its composition that is when exporting crude oil various kinds of oils (heavy and light ones) are mixed together for the purpose of exportation. But , the mixing process between different types cannot be fully , due to the lack of homogeneity among different quality of crude oil . So, the heavy parts of oil are precipitated to the bottom of tank and with passage of time they accumulate to be sediments that’s known as oil sludge stated at the bottom of the oil storage tank in the cleaning process , oil tanks are emptied and discharged in some spaces or reservoir (pits) located near the tanks called "oil pits". Which are places of dump excess oil of various types of oil from different oil tanks or they are close places from oil / water separating unites .From these spots, samples of two kinds of oil sludge : the bottom of oil tank (during the maintenance of the tank) and oil pits (near the unities of separating water from oil) are collected. Also, samples of soil surrounding the oil pits from five oil locations in Basrah city are collected too. Those locations are : west of Gurna, Northern Rumela, Southern Rumela, Nahar Umar, Alzubeir.At the rate of redundantly for each location and for each type of the study samples.This investigation is considered as the first which conducted in Iraq which include firstly the isolation and identification different types of bacterial species from different oil sludge, and secondly use some of them in biodegradation studies for two kinds of carbon sources of oil sludge : (oil sludge of tank bottom , oil sludge of oil pits) .Oil degrading bacterial species have been isolated on a selective mineral salt medium Bushnell and Hass Mineral Salt Medium (BHMS), supplemented with a carbon source. They are also identified depending on the Morphology and biochemical characteristics; four genus of bacteria (out of 89 bacterial isolates of oil sludge from the tank bottom)Bare identified. They include : 32 Pseudomonas spp. , 27 Rhodococcus spp. 21 Bacillus spp. , 9 Arthrobacter spp. , Also four genera of bacteria (out of 101bacterial isolates of oil sludge from the oil pits) are identified. They include : 41 Pseudomonas spp. 27 Rhodococcus spp. , 22 Bacillus spp. 11 Arthrobacter spp. , , While 8 species and 3 genus of bacteria (out of 259 bacterial isolates of the soil surrounding the oil pits) are identified. They include : 41 Aeromonas spp., 39 Corynebacterium spp., 39 Pseudomonas aeruginosa, 36 Bacillus spp., 33 Micrococcus leteuc, 23 Enterobacter intermedius, 22 Pseudomonas fluorescens, 12 Micrococcus varians 7 Staphylococcus epidermidis, 4 Staphylococcus saprophyticus,3Staphylococcus aureus .The biodegradation percentage of the lost in the concentration of the hydrocarbon compounds of the normal alkanes and two compounds of Pristane and Phytane are measured. Also, the biodegradation of mole percentage of the lost in the area of the hydrocarbon compounds of the normal alkanes and the two compounds of Pristane and Phytane are measured for each four genus which were isolated from the oil sludge pits, and it is also done for one isolated genus from the soil surrounding the oil pits. The measuring process was fulfilled as a comparative study with the control flasks. Thus, the oil sludge (tank bottom ) was used as a source of carbone in the first experiment While, the oil sludge (oil pits) was used as a source of carbone in the second experiment . The incubate time of the experiment is 27 days during which a lost of the percentage of hydrocarbon compounds each 9 days are recorded by using( Capillary Gas Chromatography ). The results showed the biodegradation percentage of the lost in the concentration of the hydrocarbon compounds of the normal alkanes of the oil sludge (tank bottom ) with regard toCbacteria 73.8 % Pseudomonas spp., 70.3 % Rhodococcus spp. 65.7 % Arthobacter spp., 55.6 % Aeromonas spp.,51.5 % Bacillus spp., Whereas, the biodegradation percentage of the lost in the concentration of the hydrocarbon compounds of the normal alkanes of the oil sludge (oil pits) with regard to bacteria 80 % Pseudomonas spp., 74.9 % Aeromonas spp., 70.4 % Rhodococcus spp., 64.8 % Arthobacter spp.,55 % Bacillus spp., While , The results showed of the biodegradation of mole percentage of the lost in the area of the hydrocarbon compounds of the normal alkanes of the oil sludge (tank bottom ) with regard to bacteria 73.7 % Pseudomonas spp.,70.3 % Rhodococcus spp. 65.6 % Arthobacter spp., 55.3 % Aeromonas spp. ,51.2 % Bacillus spp., Whereas, The results showed of the biodegradation of mole percentage of the lost in the area of the hydrocarbon compounds of the normal alkanes of the oil sludge (oil pits) with regard to bacteria79.2 % Pseudomonas spp., 73.8 % Aeromonas spp., 69.2 % Rhodococcus spp.,63.7 % Arthobacter spp., 53.7 % Bacillus spp. It was found that there is approximately match between the biodegradation of mole percentage by using the area and those by using the concentration for each component .

دراسة للطفيليات المعوية المعزولة من الخضروات المطرية من بعض اسواق مدينة بغداد

اسم المؤلف: وسن عداي مهدي المرسوي
الموضوع العام: علوم الحياة
السنة: 2012
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: A study was carried out during the period from November 2010 to October 2011 to detect the intestinal parasites which contaminate the common fresh vegetables. A total of 303 samples were taken from three wholesale markets and three retail markets, in Baghdad province. Ten kinds common vegetables were selected. These vegetables were Celery (Apium graveolens); Parsely (Patroselinum crispum); Garden cress (Lepidium sativum); Leek (Allium porrum); Radish (Raphanus sativus); Lettuce (Lactuca sativa); Spinach (Ipomoea aquatica); Beet (Beta vulgaris); Mint(Mentha spicata) and Cabbage (Brassica oleracea).Sedimentation and floatation techniques were used for samples examination. Three different solutions (ZnSO4, saturated NaCl , saturated sucrose ) were used in floatation technique. The present study has been shown that the collected samples of vegetables were contaminated with sixteen species of intestinal parasites. It was found that the percentages of contamination with these parasites were as following : (Giardia lamblia) (29.4%), Entamoeba histolytica(24.5%), Entamoeba coli(16.9%), Balantidium coli (8%), coccidia(9.9%) and Blastocystis hominis(0.7%). For intestinal helminthes Ascaris lumbricoides (15.6%), Toxocara spp.(10.3%), Fasciola spp. (5.3%), Schistosoma haematobium (1.7%), Schistosoma masnsoni (1.4%), Taenia spp. (4.7%), Diphyllidum caninum (3.9%), Trichuris trichiura (3.3%), Enterobius vermicularis (6.9%) and Nematoda larvae (6.3%).The present study revealed that the percentage of contaminated vegetables by using sedimentation technique (72.3%) was significantly higher than that of flotation techniques (53.1%). Additionally it was found that, the different kinds of vegetables showed a significant difference in the percentages of contamination with the parasites in both techniques. Thus, the percentage of contaminated Garden cress was (93.5%), (72.4%) in both sedimentation and flotation technique respectively, while Cabbage showed (50%), (36.7%) respectively.A significant high percentage of contamination was recorded in Al - Nahrin wholesale market (89.2%) in comparison with low percentage (59.4%) in Al - Rasheed wholesale market. Additionally, it was found that the percentages of contaminated vegetables in wholesale (76.26%) were significantly higher from that of retail market (64.76%).The present study, also, showed that the percentage of detection of parasites by using ZnSo4 solution (31.2%) was more efficient than that showed by saturated sucrose (8.9%). Additionally; the soaking with normal saline (47.83%) showed a higher percentage of contamination than that by using distilled water (17.39%).The percentages of seasonal contamination were varied significantly, therefore, it was found that spring showed the highest percentage (29.7%) while summer the lowest (20.9%). The washed samples of Garden cress which obtained from the three wholesale markets, reduced the percentages of contamination with parasites but did not remove the parasites completely. Therefore, a significant difference has been noticed between washed (56.76%) and unwashed samples (76.66%).Concerning, the percentages of infections with intestinal parasites, it was found that the medical center (14 July) showed (29.4%) while Al - Ameria center (19.2%). Furthermore, the percentage of parasites infections was significantly higher in the summer (46%) than in winter (12.67%).The present study indicated that there were a positive coordination between the high percentages of contaminated vegetables and the high percentages of infection in the medical centers as in the case of G.lamblia and E.histolytica.Finally, it could be conducted that the contaminated vegetables played an important role in transmission of intestinal parasites to human, particularly, when these vegetables were eaten fresh without sterilization or good washing.

بعض اعمامات المقاسات المتميزة == Some Generalizations of Distinguished Modules

اسم المؤلف: شيماء حبيب حسن
اسم المشرف: ليلى سلمان محمود
الموضوع العام: علوم الرياضيات
السنة: 2017
الموضوع الدقيق: الرياضيات
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: In this work, R is a commutative ring with identity and M be an (left) Rmodule.M is said to be a distinguished R - module provided that for each maximal ideal I of R. Our main concern in this work is to give and study some generalizations of distinguished modules by using some restrictions on the submodule of M. In this process we present two types of generalizations of distinguished modules, namely essentially distinguished modules and purely distinguished modules where we call M essentially distinguished when is an essential submodule of M for each maximal ideal I of R. And we call M purely distinguished when is a nonzero pure submodule of M for each maximal ideal I of R. We study these two types of modules in this thesis. The following are samples of some results that are proved in this work : 1. Let M be a principally quasi - injective R - module such that .Then M is essentially distinguished if and only if for each maximal ideal I of R, there exist such that and .2. Let M be a scalar (cyclic) principally quasi - injective R - module and let I be a maximal ideal of R. Then the following statements are equivalent : i. M is essentially distinguished.ii. contains a copy of every simple R - module.iii. is a cogenerator for Mod - R, provided that is compressible.iv. Every f. g. (or projective or multiplication) R - module is dualizable with respect to M.3. We assume M is faithful f. g. multiplication R - module. Then M is essentially distinguished if and only if R is essentially distinguished ring.4. Let M be an R - module which satisfies d. a. c. Then M is purely distinguished if and only if for each maximal ideal I of R, there exists such that (m) is pure in M and . 5. Let M be an R - module which satisfies d. a. c. If has (PSP) then M is purely distinguished.6. We take M is f. g. multiplication R - module. Then M is purely distinguished if and only if R is a purely distinguished ring.7. Let M be a distinguished faithful multiplication R - module. Then M is purely distinguished if and only if is a multiplication and an idempotent submodule of M for each maximal ideal I of R

طرق تكرارية موثوقة لحل معادلات فولتيرا التكاملية ضعيفة الانفراد الخطية وغير الخطية من النوع الثاني == Reliable Iterative Methods for Solving Linear and Nonlinear Weakly Singular Volterra Integral Equations of the Second Kind

اسم المؤلف: علي محمود شيحان علي
اسم المشرف: مجيد احمد ولي
الموضوع العام: علوم الرياضيات
السنة: 2015
الموضوع الدقيق: الرياضيات
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The main aim of this thesis is solve weakly singular Volterra integral equations of the second kind of non - linear type in the form of a series with easily computable terms by using two methods. The first method is called the modified iterative method (DJM) which is proposed by Daftardar - Gejji and Jafari and the second is called the modified power series method (MPSM). Moreover, the comparison with an existing method such as Adomian decomposition method will be presented to demonstrate the efficiency of the proposed methods.Some examples will be solved to demonstrate that the presented methods are very effective, simple and does not require any restrictive assumptions.The first part of this thesis will discuss solving of weakly singular Volterra integral equations of the second kind and provide some definitions that we will be used later.The second part of this thesis deals with the implementation of the new iterative method namely (DJM) to solve the non - linear Volterra integral equations with weakly singular kernel of the second kind.In the third part, the recursive method namely the modified power series method (MPSM) is presented to solve the non - linear Volterra integral equations with weakly singular kernel of the second kind. Software to be learned and used in this thesis is MATHEMATICA.

انواع معينة من المؤثرات الخطية في فضاء هيلبرات الاحتمالي == Certain Types of Linear Operators on Probabilistic Hilbert Space

اسم المؤلف: لانا عزيز يوسف المطلبي
اسم المشرف: راضي ابراهيم محمد علي
الموضوع العام: علوم الرياضيات
السنة: 2015
الموضوع الدقيق: الرياضيات
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The purpose of this thesis is to present certain types of linear operators on Probabilistic Hilbert Space. The definition of these operators is based on the definition of probabilistic inner product space which was first given by Schweizer and Sklar [17] in 1983.Some authors, later, studied this concept and introduced a new definition for the probabilistic inner product space (PIP - space). This new definition is called (The modified probabilistic inner product space).This thesis actually centers on introducing the Self - adjoint operator, ???? - bounded operator, ???? - continuous operator and ???? - compact operator that are defined on probabilistic Hilbert space. Their properties and connections are also discussed

الدوال المستمرة المطلقة والمقيدة التغاير == On Absolutely Continuous and of Bounded Variation Functions

اسم المؤلف: نور رياض اديب كريم
اسم المشرف: راضي ابراهيم محمد علي
الموضوع العام: علوم الرياضيات
السنة: 2016
الموضوع الدقيق: الرياضيات
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The main aim of this thesis is to give two strong forms of real - valued functions defined on closed, bounded interval [a,b] with respect to Lebesgue partitions instead of Riemann partitions. These strong forms are called "Lebesgue bounded variation" real - valued functions on [a,b] and "Lebesgue absolutely continuous" real - valued functions on [a,b]; the relationship between Lebesgue absolutely continuous real - valued functions on [a,b] and Lebesgue bounded variation real - valued functions on [a,b] are also studied. Moreover, the relationship between of bounded variation real - valued functions on [a,b] and Lebesgue bounded variation real - valued function on [a,b] has been funded. We also find the relationship between absolutely continuous real - valued functions on [a,b] and Lebesgue absolutely continuous real - valued functions on [a,b]. Furthermore, Algebraic properties of Lebesgue bounded variation real - valued functions on [a,b] and algebraic properties of Lebesgue absolutely continuous real - valued functions on [a,b] have been studied. Then some results and theorems dealing with Lebesgue bounded variation real - valued functions on [a,b] and Lebesgue absolutely continuous real - valued functions on [a,b] is concluded. Finally, we study normed space of Lebesgue bounded variation real - valued functions on [a,b] and normed space of Lebesgue absolutely continuous real - valued function on [a,b].

النقاط الصامدة في فضاءات G - المترية وفضاءات - G المترية المحتملة == Fixed Points in G - Metric Spaces and Probabilistic G - Metric Spaces

اسم المؤلف: هديل حسين لعيبي
اسم المشرف: سلوى سلمان عبد
الموضوع العام: علوم الرياضيات
السنة: 2014
الموضوع الدقيق: الرياضيات
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: الغرض من هذا الرسالة هو برهنة بعض النتائج حول النقاط الصامدة والنقاط الصامدة المشتركة ونقاط التطابق والنقاط المترافقة ( الصامدة منها والمتطابقة) في فضاءات G - المترية وG - المترية المرتبة و- Gالمترية المحتملة لتطبيقات ذات قيم منفردة ومتعددة تحقق شروط انكماشية وخواص ملائمة اخرى | The purpose of this thesis is to proving some results in the setting of G - metric spaces , ordered G - metric spaces and Probabilistic G - metric space about fixed points , common fixed point , coincidence point and coupled ( fixed / coincidence) points for single / multivalued mappings which satisfying some types of contraction conditions and appropriate other propertie
1 ... 31 32 33 34 35 ... 67