البحث — المستودع الرقمي العراقي

نتائج البحث: 25 من أصل 109

مراقبة انذار المرضى عن بعد الزمن الحقيقي اعتمادا على الصحة الالكترونية الصحة العنكبوتية الصحة الخلوية وشبكات التحسس اللاسلكية حالات الدراسة موضع منام المريض سكر الدم استجابة الجلد الكلفانية والتخطيط العضلي == Remote Patients Monitoring / Alarming In Real Time Based On E - Health / I - Health / GSM - Health And WSN, (Case Study : PP, BG, GSR And EMG

اسم المؤلف: علي جاسم رمضان

اسم المشرف: سمير جاسم محمد | محمود شاكر نصر

الموضوع العام: هندسة الكهرباء والالكترون والاتصالات

السنة: 2014

الموضوع الدقيق: هندسة الالكترونيك والاتصالات

الدرجة: ماجستير

الجامعة: جامعة بابل - كلية الهندسة - قسم الهندسة الكهربائية

اللغة: الانكليزية

مكان الجامعة: بابل

الصفحات الاولى:

المستخلص: Patient's health monitoring / diagnosing systems have become the focus of attention of researchers today. At the present time, the researchers are dealing with the E - health fields to develop and improve the healthcare systems and they work to combine the GSM and Internet technologies together.In the presented work, the researcher designed a portable real time wireless medical system for monitoring / diagnosing the patients' status based on E - health / GSM - health / I - health and wireless sensor network (WSN) under ZigBee protocol, and to support alarming and printing of medical reports subsystems.The presented system consists mainly of four subsystems, which are sensing & data transceiver, base station (BS), GSM and Internet. Where sensing & data transceiver subsystems be in the patients' lobbies and connected remotely with the base station (BS) subsystem in the wireless sensor network that collect and display the sensing data in it. Also in the designed system, the GSM and Internet technologies are inserted practically in the network.The implemented system measures the biomedical data utilizing a group of sensors that are not available in the country's hospitals in such integrated system, which are the patient position sensor (PPS), galvanic skin response sensor (GSR), blood glucose sensor (BGS), and electromyography sensor (EMG). Moreover, the system has the ability to add many other sensors.In the proposed system, three nodes (lobbies) are considered according to the facilities available, but it can monitor / diagnose unlimited patients' numbers.The system monitors the sleep position and skin conductance (indicator to patient's calm) of the patients in real time with alarm for each abnormal case in the base station (BS) and in lobbies, and it also follows up the glucose rate in patient's blood and diagnose the electromyography (muscle and nerve) status.The GSM subsystem (GSM - health) is used for remotely following - up the patients' status by sending SMS alarm in time for any abnormal case of the patient's sleep position and skin conductance, also it has ability to send the glucose data to doctor's phone. All these services are performed by using a personal phone device only without using any additional GSM modem or other apparatus, so this method reduces cost, complexity and delay time of the system that's done by interfacing the phone with the PC directly via USB port and the messages sending procedure executed using special SMSs AT commands, so the doctors become able to communicate with BS using SMS or voice calling to give the fast and direct necessary guidance.The Internet subsystem (I - health) is another excellent service for the presented system, by which remotely following - up the glucose levels by uploading the glucose data to a specific web site. It is performed by designing a web site that is programmed using VB.NET and ASP.NET languages. of course, user login feature is added to protect the privacy of patients and feedback comments feature between the doctors and patients to take the important guidance.The system has ability to introduce a printed hard copy report about the patient's electromyography status or result and blood glucose levels, by utilizing VISUAL BASIC program. Moreover, it performs searching process about the active nodes in network, this means that it detects any new node (new patient) and put it in service. In addition, the system records the patient's information and stores his health data for any archiving process or statistical study.The main hardware that is used in the implemented system includes MCUs, sensors and transceivers, and used the LABVIEW program to display the data in its GUI windows in the computer of BS.The system has been implemented practically at low cost and low power, gave expected and accurate results, and presented to the specialists doctors and they have expressed their conviction and effectiveness of the system in practice.

تصميم وبناء هوائي عريضة الشريط باستخدام المواد المسماة مابعد المادة == Design And Implementation of Ultra - Wideband Metamaterial Antenna

اسم المؤلف: مروه مكي حمد

اسم المشرف: طه احمد عليوي | سليمان مرتضى عباس

الموضوع العام: هندسة الكهرباء والالكترون والاتصالات

السنة: 2014

الموضوع الدقيق: هندسة الالكترونيك والاتصالات

الدرجة: ماجستير

الجامعة: جامعة بغداد

اللغة: الانكليزية

مكان الجامعة: بغداد

الصفحات الاولى:

الشبكات المتعلمة الرقمية متعددة الاصناف المحورة لاغراض فحص كريات الدم الحمراء == Modified Multi - Category Digital Learning Network For Red Blood Cell Inspection

اسم المؤلف: سهاد قاسم غلام حسين حداد

اسم المشرف: محمود حمزة المفرجي

الموضوع العام: هندسة الكهرباء والالكترون والاتصالات

السنة: 2014

الموضوع الدقيق: هندسة الالكترونيك

الدرجة: ماجستير

الجامعة: الجامعة التكنولوجية - قسم الهندسة الكهربائية

اللغة: الانكليزية

مكان الجامعة: بغداد

الصفحات الاولى:

اعادة تشكيل واضافة متسعات في قطاع توزيع كهرباء بغداد == Reconfiguration And Capacitor Placement In A Baghdad Distribution Sector

اسم المؤلف: اديب ناصر حسين

اسم المشرف: ثامر محمد عبد الوهاب

الموضوع العام: هندسة الكهرباء والالكترون والاتصالات

السنة: 2014

الموضوع الدقيق: هندسة الكهرباء - قدرة ومكائن

الدرجة: ماجستير

الجامعة: الجامعة التكنولوجية - قسم الهندسة الكهربائية

اللغة: الانكليزية

مكان الجامعة: بغداد

الصفحات الاولى:

المستخلص: يعد تخطيط شبكات التوزيع الكهربائية من الاولويات في الوقت الحاضر في العراق نظرا للزيادة الهائلة في الاحمال الكهربائية والتوسعات المفروضة على الشبكات نتيجة التوسع العمراني الكبير والسريع.يتحقق الاداء الامثل للشبكة بتقليل المفاقيد‘ تحسين الجهد (Voltage pr | Planning of electrical distribution networks is considered of highest priority at the present time in Iraq, due to the huge increase in electrical power demand and expansions imposed on distribution networks as a result of the great and rapid urban development. Optimum performance of the electrical network is achieved by reducing losses, improving voltage profile and alleviating overload for the system components. Such operation provides for energy salvage and redundancy in the electrical network. A planning method is proposed in this work to achieve optimum operating conditions of the network by combining the network reconfiguration in conjunction with the insertion of capacitors of optimal sizing and locations. This method is classified as a huge discrete non - linear optimization problem due to the large number of variables along with the presence of constraints and objectives. The power losses and voltages in buses for all cases are obtained by backward/forward load flow method. The proposed planning of distribution networks is based on the powerful and advanced CYMDist software as a tool for the simulation of distribution networks and performing the required analysis. CYMDist is practical and efficient analysis software, which is used by many electrical companies worldwide as well as the Iraqi ministry of electricity.Optimal network reconfiguration and capacitor placement methods are tested on IEEE 33 - bus and IEEE 34 - bus test systems, respectively. The results show excellent matching as compared with previous work mentioned in the literature.The work is implemented on an actual sector from Baghdad city distribution network, which is Al_Bayaa 11kV, 145 bus, four feeders system. The presented results show that minimum active power losses with improved voltage profile had been achieved. So the network can operate normally without any constraints violation.

تصميم هوائي ضوئي يعمل ضمن نطاق تحت الحمراء الترددي باستخدام تقنية البلازمونك == Optical Antenna Design In Ir Range Using Plasmonic Technology

اسم المؤلف: هادي كريم شمخي

اسم المشرف: محمد ناظم عباس

الموضوع العام: هندسة الكهرباء والالكترون والاتصالات

السنة: 2014

الموضوع الدقيق: هندسة الكهرباء

الدرجة: ماجستير

الجامعة: جامعة بغداد - كلية الهندسة - قسم الهندسة الكهربائية

اللغة: الانكليزية

مكان الجامعة: بغداد

الصفحات الاولى:

المستخلص: Optical antennas, resonant structures, which efficiently collect free - space light and focus it into a nanoscale volume using plasmonic, are indispensable in the burgeoning field of nanophotonics. In this work, resonance behaviors of the fundamental resonance mode of diabolo gold metal bar optical antennas were investigated. The relationship between the near - field enhancement, absorption, and scattering spectra of localized plasmonic elements was explored. It was found that as the waist of the diabolo gold metal bar optical antenna was reduced, optical energy absorption cross section and near field enhancement at resonance increased significantly. Also reduction of the diabolo waist width caused redshift of the resonant wavelengths in the spectra of absorption cross - section, scattering cross - section, and the near electric field. Oppositely, it was found that as the length of the diabolo gold metal bar optical antenna was reduced, optical energy absorption cross section and near field enhancement at resonance decreases significantly. Also reduction of the diabolo length caused blue - shift of the resonant wavelengths in the spectra of absorption cross - section, scattering cross - section, and the near electric field.Grating surface diabolo antenna design was proposed. It was found that grating superstructure perturbed the optical properties of SPPs (Surface Plasmon polarions) and enabled the control of resonance wavelength of the antenna. The grating reduced the power that flow out from the antenna and enhanced the localized electromagnetic fields intensity. The grating also increased surface plasmon currents because of the formation of bound surface states. As a result, the absorption spectra and near field intensity were enhanced but at the same time, the scattering spectra and the far field pattern were reduced.Titanium - Gold grating surface diabolo antenna was proposed. It was found that titanium metal strengthen the grating perturbation of the optical properties of SPPs and allowed wide range of wavelength shifting (3.5 ?m). Because Gold and Titanium have difference electrical resonance characteristics, less plasmon damping occurred, resulting in lower scattering efficiency and narrower plasmon line widths.Finally, system modelling and simulations is done by using electrical department super computer (24 parallel MP and 64 GB RAM) and COMSOL multiphysics 4.4 software.

تحليل الاضطراب لتوربينة الرياح المربوطة مع منظومة القدرة == Disturbance Analysis of A Wind Turbine Connected With Power System

اسم المؤلف: احمد نجم عبد الامير

اسم المشرف: كنعان علي جلال

الموضوع العام: هندسة الكهرباء والالكترون والاتصالات

السنة: 2014

الموضوع الدقيق: هندسة الكهرباء - قدرة ومكائن

الدرجة: ماجستير

الجامعة: الجامعة التكنولوجية - قسم الهندسة الكهربائية

اللغة: الانكليزية

مكان الجامعة: بغداد

الصفحات الاولى:

المستخلص: نظرا لزيادة الطلب على الطاقة في السنوات الاخيرة نتيجة للتوسع السكاني والصناعي ولتقليل التلوث الناتج من الوقود التقليدي والحفاظ على البيئة مما دعت الحاجة الى استخدام مصادر بديلة للطاقة, والتي يجب ان تمتاز بعدة ميزات اهمها انها صديقة للبيئة وغير قابلة للنفا | According to increasing the demand for energy in recent years as a result of the expansion of the population and to reduce pollution from conventional fuels, the need arises to find alternative sources of energy which must be characterized by several features, most important of which is friendly to the environment and sustainable. In this work, the effect of different types of disturbances on the performance of fixed speed of wind turbine generator type Squirrel Cage Induction Generator (SCIG) connected to the power system has been investigated, because it has features which make the best choice in some cases, despite the less efficiency compared with other types of generators. Also, this work aims to study and analysis the effect of (STATCOM) on the wind turbine generators because of its advantages in improving voltage stability of the grid and improving the quality of the productive power. The proposed work is performed using MATLAB/Simulink. The intelligent systems have been used to obtain the best performance in terms of extracting more power from wind energy as well as increase the stability of system in situations of disturbances and the results obtained have been compared with conventional control systems.Three types of controllers are proposed in this work; the first controller is the Proportional - Integral (PI) based on classical trial and error method, the second controller is PI - controller based on Particle Swarm Optimization (PSO) technique for optimal tuning (gain) to improve the performance of the system. The results obtained proved that the PI - controller based on Particle Swarm Optimization (PSO) technique is better than based on trial and error method. The third controller is (Nonlinear Auto regressive - Moving Average) NARMA - L2 based on (PSO). Finally, the results of the proposed controllers show that NARMA - L2 controller is more effective on the stabilization and improves the performance of the system compared with PI - PSO controller

تقييم اداء المسافية بوجود اجهزة FACTS == Distance Protection Performance Evaluation In Presence of Facts Devices

اسم المؤلف: امير عقيل محمد

اسم المشرف: قيس متي الياس

الموضوع العام: هندسة الكهرباء والالكترون والاتصالات

السنة: 2014

الموضوع الدقيق: هندسة الكهرباء - قدرة ومكائن

الدرجة: ماجستير

الجامعة: الجامعة التكنولوجية - قسم الهندسة الكهربائية

اللغة: الانكليزية

مكان الجامعة: بغداد

الصفحات الاولى:

المستخلص: With limited enhancement or expansion of the transmission infrastructure, the contemporary power systems are operating under more stressed conditions. It becomes important to fully utilize the existing transmission system to supply load demand as much as possible, thus eliminating or reducing the need for new transmission investment. Flexible AC Transmission System (FACTS) technology provides a method to fully utilize the existing transmission lines as well as new and upgraded lines. However, the implementation of FACTS devices in the transmission system has introduced new power system dynamics that must be addressed in the area of power system protection, such as rapid changes in line impedance, line current and voltage. This thesis reports the results of comprehensive study carried out to explore the impact of mainly two of the FACTS devices, Static Synchronous Compensator 'STATCOM' and Unified Power Flow Controller 'UPFC', on the distance protection relaying system in order to identify important issues that protection engineers need to consider, that is during the stages of design and operation of the protection system. Simulation studies are carried out using MATLAB/SIMULINK. First, the distance relay has been modeled and validated with FACTS device models using test systems from literature. Then the distance relay performance is analyzed and evaluated for various fault and loading conditions in the presence of FACTS devices. A comprehensive study and results for one of the Iraqi 400kV transmission lines (KDS4 - NSRP transmission line) are presented and useful recommendations can be presented to the General Directorate of electrical Power Transmission for Middle Euphrates region / Iraqi Ministry of Electricity. II Abstract Generally, the results show that the apparent impedance seen by the distance relay would be different from that of the system without FACTS devices. Due to this, the distance relay may malfunction, resulting in undependable operation of the power system protection during faults. Furthermore, the results show clearly the dependency of the distance relay operation on many design and operational factors. These include the FACTS device type and its use purpose, the FACTS device connection point or location, the fault type and fault point location along the line, the power flow,...etc.

تبؤ الاحمال الكهربائية للشبكة العراقية للمدة القصيرة باعتماد نظام المنطق الضبابي == Short - Term Electrical Load Forecasting For Iraqi Power System Based On Fuzzy Logic System

اسم المؤلف: هدى منهي عبد العباس

اسم المشرف: Firas Mohammed Tuaimah

الموضوع العام: هندسة الكهرباء والالكترون والاتصالات

السنة: 2014

الموضوع الدقيق: هندسة الكهرباء

الدرجة: ماجستير

الجامعة: جامعة بغداد - كلية الهندسة - قسم الهندسة الكهربائية

اللغة: الانكليزية

مكان الجامعة: بغداد

الصفحات الاولى:

المستخلص: Load forecasting is used by participants in electric energy generation, transmission, distribution, and marketing for a variety of decision - making processes, such as economic dispatch, unit commitment, hydro - thermal coordination, transaction evaluation, and expansion planning. However, the need for accurate forecasts has intensified in the last decade due to the energy industry deregulation. Taking this into account as well as the rapid fluctuations in demand and abrupt changes in weather condition, access to reliable models for accurate forecast of load demand is essential. Due to the need for accurate load forecasts, numerous statistical and artificial intelligence methods have been proposed for the short - term load forecasting problem.In this study, the Multiple Linear Regression (MLR) method, which is one of the statistical methods, and an Interval Type - 2 Takagi - Sugeno - Kang Fuzzy Logic System (IT - 2 TSK FLS), which is one of the artificial methods and an extension of the conventional fuzzy logic system, were applied. Developed models were trained using the genetic algorithm. With the purpose of an objective assessment, the available dataset was split into training samples (80%, ????????????) and test samples (20%, ??????????). The training data used in this study covered the period from January 1, 2012 to February 1, 2012 for winter season and the period from July 1, 2012 to August 1, 2012 for summer season. The actual load forecasting period started from January 22, till 28, 2012 for winter model and from July 22 till 28, 2012 for summer model.This work suggested two models; the first model was for hourly (24 hour) load forecasting for one day ahead and the second model was for one week ahead in hourly forecasting (from one until 168 hour). For each model, winter and summer seasons were presented. The Main average percentage error (MAPE) term is an index that provides information about the bias of the model and how close forecasts or predictions are to the eventual outcomes. Experiments conducted with real datasets for the Iraqi power system showed that IT2 TSK FLS models precisely approximated future load demands with an acceptable accuracy.The real data for Iraqi power system were taken from Iraqi Operation and Control Office which belongs to the Ministry of Electricity.A computer program, written in MATLAB programming languages, was developed to represent the proposed method.

تحسين تخطيط المسار للروبوتات المتنقلة والمستقلة بالحركة باستخدام خوارزميات الامثلية القائمة على مبدا التجمعات == Improvement of Path Planning For Autonomous Mobile Robots Using Population - Based Optimization Algorithms

اسم المؤلف: فرح مهدي علي

اسم المشرف: نزار هادي عباس

الموضوع العام: هندسة الكهرباء والالكترون والاتصالات

السنة: 2014

الموضوع الدقيق: هندسة الكهرباء

الدرجة: ماجستير

الجامعة: جامعة بغداد - كلية الهندسة - قسم الهندسة الكهربائية

اللغة: الانكليزية

مكان الجامعة: بغداد

الصفحات الاولى:

المستخلص: Autonomous mobile robots are used in various applications such as dangerous regions. These applications demand robust and adaptable methods for path planning.Path planning optimization problem is a fundamental problem for robot navigation; its purpose is to find a collision - free path from the initial position to a target position. Many real - world optimization problems have become increasingly large, complex and dynamic, which require the development of methods and solutions whose efficiency ismeasured by their ability to find acceptable results within a reasonable amount of time.The Artificial Bee Colony (ABC) and Bacterial Foraging Optimization (BFO) algorithms are used for solving hard optimization problems, including path planning. BFO algorithm is a simple and powerful searching technique. On the other hand, Artificial Potential Field (APF) as a real time obstacle avoidance method is quite simple in theory, but it is easy to bring local minimum problem and failing to find a path in the narrow channel. Therefore, a method for hybridizing APF with BFO is introduced to make use of both methods' advantages. This thesis presents efficient and reliable four optimization algorithms to solve the path planning problem. The first two algorithms are developed based on ABC algorithm as global path planning; they specifically are modified version of ABC algorithm called Directed ABC (DABC) algorithm and a new fitness function added to ABC algorithm named Minimum Angles (MAABC) algorithm was developed. The other two algorithms were proposed based on BFO and APF algorithms as local path planning; they were namely improved versions of BFO algorithm with adaptive step size (ASBFO) algorithm and a proposed version of BFO algorithm with an adaptive tumble (ATBFO) algorithm.The developed algorithms were simulated using MATLAB R2011b package. The simulation results showed that these algorithms could find the shortest paths for even crowded environments. Moreover, these algorithmswere compared with other researchers’ work to evaluate their performance. Additionally, a comparison was made between the executing time of the proposed local path planning algorithms (ASBFO and ATBFO algorithms) and the real tracked military robot (e.g., Talon) to verify the capability of the proposed methods. Both algorithms achieved fast run time, approximately three times faster than Talon for complex environment, which made them practically efficient.

تجزئة الحزمة لالغاء الضوضاء المتكيف في تنقية الاشارة الكلامية == Subband Decomposition For Adaptive Noise Cancellation In Speech Enhancement

اسم المؤلف: حوراء فاضل عبيد

اسم المشرف: منال جميل الكندي

الموضوع العام: هندسة الكهرباء والالكترون والاتصالات

السنة: 2014

الموضوع الدقيق: هندسة الالكترونيك والاتصالات

الدرجة: ماجستير

الجامعة: جامعة النهرين - كلية الهندسة - قسم الهندسة الالكترونية والاتصالات

اللغة: الانكليزية

مكان الجامعة: بغداد

الصفحات الاولى:

المستخلص: Nowadays speech processing methods are usually implemented in the time or frequency domain. Filter bank can be considered as a divide and conquer approach within signal processing, since large problems are sub - divided into many smaller problems. While filter banks are essential components of speech processing, and in signal processing in general, they will have the focus in present days. An adaptive filter is a filter that self adjusts its transfer function according to its optimizing algorithms. Least mean square algorithm has slow convergence when used with nonstationary signals like speech and it has high computational cost but normalization of step size (or input signal) leads to a useful variant of the LMS algorithm known as the normalized LMS (NLMS) algorithm, which gives better convergence characteristics than the LMS because it uses a variable step - size with respect to the input signal power.To improve the convergence rate and/or computational complexity and also to overcome the disadvantage of a full band adaptive filtering, a structure is illustrated that is subband adaptive filtering; this will converge faster at a lower computational cost for speech and white noise inputs.This research shows most types of subband decomposition structures and makes comparison among them based on their performance to cancel the noise with minimum computational complexity, maximum convergence speed and maximum noise cancellation with lowest delay.Moreover three new hybrid tree configurations or the tree decom - position are proposed to maximize the overall performance of adaptive noisecancellation system.They are given the abbreviations HTPSAF1,HTPSAF2 and HTPSAF3. These three systems use polyphase filter bank that has showed a noticeable increase in the convergence speed and large reduction in the computational complexity due to the lower number of coefficients that can be achieved for the analysis/synthesis filters, which in turn will result in minimum delay in the reconstructed output speech signal.The algorithm of subband decomposition structures has been described theoretically then modeled under MATLAB simulation program using built - in filters and real input signals.

تصميم وتنفيذ منظومة مقاييس متوزعة ذكية == Design And Implementation of A Smart Distributed Metering System

اسم المؤلف: مهند غازي خميس

اسم المشرف: عدي عبد اللطيف عبد الرضا

الموضوع العام: هندسة الكهرباء والالكترون والاتصالات

السنة: 2014

الموضوع الدقيق: هندسة الالكترونيك والاتصالات

الدرجة: ماجستير

الجامعة: جامعة بغداد

اللغة: الانكليزية

مكان الجامعة: بغداد

الصفحات الاولى:

تحسين استقرارية منظومة الشبكة العراقية (kV 400) باستعمال افضل جهاز من اجهزة ال FACTS == Stability Improvement of The (400kV) Iraqi Grid Using The Best FACTS Device

اسم المؤلف: شيماء شكري عبد الحليم

اسم المشرف: رشيد حميد الربيعي

الموضوع العام: هندسة الكهرباء والالكترون والاتصالات

السنة: 2014

الموضوع الدقيق: هندسة الكهرباء - قدرة ومكائن

الدرجة: ماجستير

الجامعة: الجامعة التكنولوجية - قسم الهندسة الكهربائية

اللغة: الانكليزية

مكان الجامعة: بغداد

الصفحات الاولى:

المستخلص: يعتبر نظام القدره الكهربائيه من الانظمه الضخمه والمعقده لاحتوائها على عدد كبير من محطات التوليد وخطوط النقل واجهزة السيطرة لذلك فانه يخضع الى تغيرات مفاجئه في مستويات الحمل، حيث اصبح من الصعب جدا الحفاظ على نظام مستقرمع التغيرات التي يشهدها النظام, لذلك | Electrical power system has become large and complicated so it is susceptible to sudden changes in load levels. Stability is an important concept which determines the stable operation of power system.The modern trend is to employ Flexible Alternating Current Transmission System (FACTS) devices in the system for effective utilization of transmission resources. The FACTS devices contribute to power flow improvement besides they extend their services in transient stability improvement as well, study and analyze the stability of system through rotor angle and voltage. The objective of this work is to improve the transient stability of the Iraqi National Super Grid System (INSGS) by using best FACTS device in different optimal locations under fault conditions. Two test systems are studied, the first system is IEEE 9 - bus test system, and the second system is the Iraqi (400 kV) electrical network 24 - bus bars, three phase to ground fault, temporary fault and permanent fault are tested. The load flow program was implemented using Newton - Raphson method and the numerical solutions of non - linear differential equations are solved using Trapezoidal method. The programs that are used in this work are implemented using MATLAB 7.12.0(R2011a) package based on Power System Analysis Toolbox (PSAT version 2.1.6)software.copyright © 2002 - 2010 by Federico Milano as Graphical User Interface. A comparison has been made between five types of FACTS (UPFC, SSSC, TCSC, SVC, STATCOM) at optimal locations of the Iraqi grid and 9 - bus test system to get optimal FACTS devices by (voltage stability and rotor angle stability). The results obtained show that Unified Power Flow Controller (UPFC) is an optimal device for improvement the stability by damping the voltage and rotor angle oscillations.

التشوه بالتوافقيات في اشارات التدفق للمتحسس السعوي الحيزي المثبت خارجيا == Harmonic Distortion In The Flow Signals of Externally Mounted Capacitive Spatial Filter

اسم المؤلف: مروه مالك حسوني

اسم المشرف: عباس احمد الشالجي

الموضوع العام: هندسة الكهرباء والالكترون والاتصالات

السنة: 2014

الموضوع الدقيق: هندسة الالكترونيك والاتصالات

الدرجة: ماجستير

الجامعة: جامعة النهرين - كلية الهندسة - قسم الهندسة الالكترونية والاتصالات

اللغة: الانكليزية

مكان الجامعة: بغداد

الصفحات الاولى:

تمثيل وتنفيذ العاكس ثلاثي الطور رباعي السيقان بواسطة طريقة المتجه الفضائي بتضمين عرض النبضة == Modeling And Implementation of Space Vector PWM Four - Leg Three Phase Inverter

اسم المؤلف: لؤي كمال عبد القادر

اسم المشرف: فاضل عباس مهدي القرملي

الموضوع العام: هندسة الكهرباء والالكترون والاتصالات

السنة: 2014

الموضوع الدقيق: هندسة الكهرباء

الدرجة: ماجستير

الجامعة: جامعة بغداد - كلية الهندسة - قسم الهندسة الكهربائية

اللغة: الانكليزية

مكان الجامعة: بغداد

الصفحات الاولى:

تحليل المسار النازل لنظام الاتصال اللاسلكي التكيفي المتعدد المداخل والمخارج والمستخدمين == Analysis of Adaptive Downlink Multiuser Mimo Wireless Communication System

اسم المؤلف: عمر جبار ابراهیم

اسم المشرف: رعد سامي فياض

الموضوع العام: هندسة الكهرباء والالكترون والاتصالات

السنة: 2014

الموضوع الدقيق: هندسة الاتصالات

الدرجة: ماجستير

الجامعة: جامعة النهرين - كلية الهندسة - قسم الهندسة الالكترونية والاتصالات

اللغة: الانكليزية

مكان الجامعة: بغداد

الصفحات الاولى:

طرائق الكشف للتضمين الترددي المتعامد للرابط النازل في نظام تطور طويل الامد (LTE) == Detection Methods For Ofdm Downlink In Long Term Evolution (LTE) System

اسم المؤلف: اكرم جبار عبد الحسين حسن

اسم المشرف: يمان اسماعيل مجيد

الموضوع العام: هندسة الكهرباء والالكترون والاتصالات

السنة: 2014

الموضوع الدقيق: هندسة الالكترونيك والاتصالات

الدرجة: ماجستير

الجامعة: جامعة بغداد

اللغة: الانكليزية

مكان الجامعة: بغداد

الصفحات الاولى:

بناء خوارزمية تزامن لانظمة (OFDM) باستخدام معالجة الاشارة الرقمية == Dsp - Based Synchronization Algorithm Implementation For OFDM System

اسم المؤلف: رائد ستار جبر

اسم المشرف: محمود عبد القادر عبد الستار

الموضوع العام: هندسة الكهرباء والالكترون والاتصالات

السنة: 2014

الموضوع الدقيق: هندسة الالكترونيك والاتصالات

الدرجة: ماجستير

الجامعة: جامعة بغداد - كلية الهندسة - قسم الهندسة الكهربائية

اللغة: الانكليزية

مكان الجامعة: بغداد

الصفحات الاولى:

المستخلص: تعدد الارسال للتردد بالتقسيم المتعامد (OFDM) هو مفتاح تمكين التكنولوجيا لمعظم انظمة الاتصالات اللاسلكية الحالية ذات معدل نقل البيانات العالي. والميزة الرئيسية للـ (OFDM) مقارنة بالطرق التقليدية هو انه يحول القناة ذات النطاق العريض الى قنوات فرعية ضيقة متو | Orthogonal Frequency Division Multiplexing (OFDM) is the key enabling technology for most current high data - rate wireless communication systems. The primary advantage of OFDM over conventional schemes is that it converts a wideband channel into parallel narrowband sub - channels allowing relatively simple channel estimation and frequency domain equalization. It is as an effective technique for coping with channel impairments like multipath propagation and Inter Symbol Interference (ISI) by making use of an appropriate cyclic prefix. One of the major drawbacks of OFDM is that it is more sensitive to synchronization errors than its single carrier counterparts. This thesis describes a real - time implementation of a timing and frequency synchronization for OFDM system using MATLAB software Simulink, DSP processor TMS320C6713 and Code Composer Studio (CCS). The hardware interface converts the baseband signal from the PC to the DSP Processor. Basic transmission and reception performances are evaluated in real time using Real Time data Transfer (RTDX). The practical results and performance evaluation of the synchronization algorithms in OFDM system is presented and discussed. The results are plotted for different offsets of CFO and STO with different values of signal to noise ratio. Also the bit error rate (BER) and the mean square error (MSE) of the system is analyzed. The results show that the time offset more effect than frequency offset because of ISI and ICI occurs when time offset occur in the system. The synchronization algorithm is found to be robust for both CFO and STO simultaneously. It can handle offset of about CFO = 500 Hz and STO = 14 samples simultaneously without wasting extra bandwidth. This algorithm used for synchronization more robust for 16QAM compared with 4QAM modulation.

التركيب السليكوني النانوي في الخلايا الشمسية == Nanostructured Silicon Based On Solar Cells

اسم المؤلف: نور احمد سلمان

اسم المشرف: ثائرة زكريا الطيار

الموضوع العام: هندسة الكهرباء والالكترون والاتصالات

السنة: 2014

الموضوع الدقيق: هندسة الالكترونيك

الدرجة: ماجستير

الجامعة: الجامعة التكنولوجية - قسم الهندسة الكهربائية

اللغة: الانكليزية

مكان الجامعة: بغداد

الصفحات الاولى:

المستخلص: تعتبر الخلايا الشمسية تكنولوجيا واعدة وقابلة للتجديد حيث ازداد الطلب عليها نتيجة لزيادة الاهتمام بالطاقة الكهروضوئية. ان التحسين المستمر لكفاءة الخلايا الشمسية بايجاد التقنيات والمفاهيم الجديدة يجب ان يمتد على نحو متزايد باعتبارها واحدة من اهم مصادر الط | The demand for solar cells has been growing rapidly with an increasing social interest in photovoltaic energy. The improvement of energy conversion efficiency of solar cells is performed by developing the technology and concepts that have been increasingly extended as one of the key components in our future global energy supplement. But, the main problem of photovoltaic modules are their rather high production and energy cost. Three generations of solar cell technologies have been established in the previous century.Nanostructured silicon substrates based on p - type crystalline Silicon (c - Si) have been prepared in this work. Electrochemical Etching (ECE) of the Silicon (Si) wafers in Hydrofluoric (HF) acid was employed to synthesize porous layers consisting of silicon nanostructures. The process was carried out at different etching time and different current densities which are considered as effective parameters in ECE process. It is found that a homogeneous porous layer could be obtained with porosity value of (87%) when the current density is (60 mA/ cm2) and the etching time of (10 min). Among the Transparent Conductive Oxide (TCO) materials available, Zinc Oxide (ZnO) films show promising electrical and optical properties in combination with low cost alternatives. It can function as Anti - Reflecting Coating (ARC), window material, transparent electrode and active layer in heterojunction solar cells. n - type ZnO thin films are grown on p - type nanostructured silicon substrates by using Pulsed Laser Deposition (PLD) technique with Q - switching Nd : YAG laser beam Second Harmonic Generation (SHG) [?=(532 nm), number of pulses (140) pulses, and laser energy (820 mJ)], vacuum of (10 - 3 Torr), ambient oxygen pressure of (10 - 1 Torr), and substrate temperature of (400 °C). The morphological, optical, chemical and structural properties were investigated using Atomic Force Microscopy (AFM), Ultraviolet - Visible (UV - VIS) spectroscopy, Fourier Transform Infrared (FTIR) spectroscopy, and X?Ray Diffraction (XRD) techniques, respectively.Surface morphology and optical properties results show densely packed highly crystalline growth of ZnO thin film on nanostructured silicon substrate grown at optimum condition with an average grain size around (88.57 nm). The average roughness, root mean square, and ten - point height estimated from AFM quantitative analysis, are found to be (3.02 nm), (3.62 nm), and (8.76nm) respectively. The thickness is calculated and found to be (100 nm). The film shows high transparency (above 80%) and the estimated Energy - gap (Eg) is found to be about (3.4 eV). This is important for its applications as transparent conductive films and solar cell windows. The chemical and structural properties results characterize ZnO at (420 cm - 1) and (766 cm - 1) absorption bands respectively and the thin film is polycrystalline with hexagonal Wurtzite structure.

محاكاة GSM/EDGE وGSM لنظام الاتصالات المتنقلة == Simulation of GSM And GSM/EDGE Mobile Communication Systems

اسم المؤلف: اسامة علي عبد الله

اسم المشرف: رعد سامي فياض

الموضوع العام: هندسة الكهرباء والالكترون والاتصالات

السنة: 2014

الموضوع الدقيق: هندسة الاتصالات

الدرجة: ماجستير

الجامعة: جامعة النهرين - كلية الهندسة - قسم الهندسة الالكترونية والاتصالات

اللغة: الانكليزية

مكان الجامعة: بغداد

الصفحات الاولى:

تصميم وتنفيذ ذراع الي موجه عن طريق اشارة تخطيط العضلات باستخدام المتحكم الدقيق == Design And Implementation of A Robot Arm Driven By EMG Signal Based On Microcontroller Unit

اسم المؤلف: انس عبد الحميد كاظم

اسم المشرف: خالدة شعبان رجب

الموضوع العام: هندسة الكهرباء والالكترون والاتصالات

السنة: 2014

الموضوع الدقيق: هندسة الالكترونيك

الدرجة: ماجستير

الجامعة: الجامعة التكنولوجية - قسم الهندسة الكهربائية

اللغة: الانكليزية

مكان الجامعة: بغداد

الصفحات الاولى:

المستخلص: تعتبر اشارة (EMG) هي الاشارة المكتشفة على سطح الجلد فوق العضلة والمتولدة من مصدر المجال الكهريائي عند التقلص العضلي. الاشارة العضلية بصورة رئيسية في مجالين : تشخيص الخلل العضلي واشارة تحكم لسياقة ذراع الي، يستخدم الذراع الالي المساق بواسطة الاشارة العضلي | Electromyogram (EMG) is a signal detected on the skin above a muscle and generated by sources of electric field within the muscle during contraction. EMG signal is used mainly in two fields; Muscle disorder diagnostic and control signal for driving robotic arm. The robot arm driven by EMG is used as a remote control in hazard places or as prosthesis part for limbs of disabled. The first part presents placing array of EMG electrode on two muscles and measure the EMG signal, design acquisition circuit to optimize the EMG signal for two muscles; hardware circuit that designed will eliminate the noise resulting from cable, electrodes, 50Hz and aliasing. In order to monitor and record EMG signal, Data Acquisition System (DAQ) is designed for this purpose using Arduino platform, which gives the ability to deal with signal. The real time signal was taken from three persons with different weights and ages. The second part includes a proposed design of digital filter with windowing and applying to real time signal to compare the results for many times of orders and types of windowing in order to meet the best criteria. The FIR filter with 8th order will be chosen as digital filter with Hann windowing that is apply to eliminate the EMG noise that is caused from many sources and results optimum EMG signal that is used to control robot arm, implementing digital filter characteristic into dsPIC30F4013 which it signal processing microcontroller and using the filtered signal to control the robot arm by interfacing with DC driver to drive robotic arm with two degrees of freedom (2 - DOF). Also, this part includes the technique which simulates the results using MATLAB 2011a to control the movements of the robotic arm. Micro C for dsPIC© is used to write C code for FIR digital filter and loops with control algorithm to enable the controlling robot arm.

تقليل التاثيرات اللاخطية في منظومات التقسيم المتعدد للطول الموجي العالية الكثافة == Mitigation of Fiber Nonlinearity Effects In Ultra High - Dence WDM System

اسم المؤلف: سيف حسام عبد الواحد

اسم المشرف: علي يوسف فتاح

الموضوع العام: هندسة الكهرباء والالكترون والاتصالات

السنة: 2014

الموضوع الدقيق: هندسة الاتصالات

الدرجة: ماجستير

الجامعة: الجامعة التكنولوجية - قسم الهندسة الكهربائية

اللغة: الانكليزية

مكان الجامعة: بغداد

الصفحات الاولى:

المستخلص: The optical signal is severely degraded when transmitted in the fiber due to both the linear and nonlinear distortions. It is well known that, the linear distortions in single mode fiber include chromatic dispersion (CD) and polarization - mode dispersion (PMD) while self - phase modulation (SPM), cross phase modulation (XPM) and four - wave mixing (FWM) are considered the most among nonlinear distortions. To deal with the nonlinear impairments, a number of techniques, such as electronic equalization, pre - coding, digital back - propagation(BP), pre - chirping, optical phase conjugation (OPC) and nonlinearity management, are developed and improved. In the present work, a method called Fractional Fourier Transform (FRFT) has been applied to mitigate fiber nonlinearity impairments. The Fractional Fourier Transform is a time - frequency distribution and an extension of the classical Fourier transform. Time domain FRFT can be implemented by using time lens according to the optical time - space duality theory. The modulated optical pulses will be pre - distorted by an FRFT module before being launched into fiber links. In this work, 10 Gb/s optical fiber system with five spans, each of length 60 Km, for three types of modulation formats (Return - to - Zero Differential Phase Shift Keying (RZ - DPSK), Return - to - Zero Differential Quaternary Phase Shift Keying (RZ - DQPSK) and Carrier - Suppressed Return - to - Zero (CSRZ)), single and multi - channel transmission systems are designed and simulated using “OptiSystem (2011) version 10.0” software package. In order to analyze the transmission performance of the simulated systems without and with FRFT, a set of eye diagrams, optical spectrum visualizers, Q - factor versus input power and Bite Error Rate (BER) versus Signal to Noise Ratio (SNR) curves are presented to evaluate the influence of FRFTon the system performance. For CSRZ modulation format the Q - factor for single channel system at 0 dBm (input power) was 43.5 without FRFT and 78 with FRFT. The BER of sixteen channel system (channel No.8) at bit rate 10 Gb/s per channel, 300 Km link length of CSRZ modulation format with channel spacing of 50 GHz at SNR 10 dB without FRFT is 10 - 4.8 and 10 - 7.4 with FRFT. The BER of thirty two channel system (channel No.16) at bit rate 10 Gb/s per channel, 300 Km link length of CSRZ modulation format with channel spacing of 50 GHz at SNR 10 dB without FRFT is 10 - 4.6 and 10 - 6.4 with FRFT. The BER of thirty two channel system (channel No.16) at bit rate 10 Gb/s per channel, 300 Km link length of CSRZ modulation format with channel spacing of 25 GHz at SNR 10 dB without FRFT is 10 - 2.56 and 10 - 3.24 with FRFT.

تاثير اللاخطية في الالياف البصرية على اداء نظام تجميع الاطوال الموجية الضوئية المنقسمة باستخدام تقنية الاستقطاب المزدوج لتقسيمات التردد المتعامد الضوئي == Effect of Fiber Nonlinearity On The Performance of WDM Optical Systems Using Dual Polarization CO - OFDM Technique

اسم المؤلف: بشار مظفر احمد

اسم المشرف: رعد سامي فياض

الموضوع العام: هندسة الكهرباء والالكترون والاتصالات

السنة: 2014

الموضوع الدقيق: هندسة الالكترونيك والاتصالات

الدرجة: ماجستير

الجامعة: جامعة النهرين - كلية الهندسة - قسم الهندسة الالكترونية والاتصالات

اللغة: الانكليزية

مكان الجامعة: بغداد

الصفحات الاولى:

الموقع الامثل للمعوض التزامني الثابث لشبكة الضغط الفائق العراقية باستخدام الخوارزمية الجينية == Optimal Location of Static Synchronous Compensator (STATCOM) For Iraqi National (400kV) Super High Voltage Grid Using Genetic Algorithm

اسم المؤلف: حسن علي عبد المجيد سلبي البياتي

اسم المشرف: Firas Mohammed Tuaimah

الموضوع العام: هندسة الكهرباء والالكترون والاتصالات

السنة: 2014

الموضوع الدقيق: هندسة الكهرباء

الدرجة: ماجستير

الجامعة: جامعة بغداد - كلية الهندسة - قسم الهندسة الكهربائية

اللغة: الانكليزية

مكان الجامعة: بغداد

الصفحات الاولى:

المستخلص: Transmission networks of modern power systems are becoming increasingly stressed because of the growing demand and restrictions on constructions new lines. One of the consequences of such a stressed system is the threat of losing stability following adisturbance. Flexible AC Transmission System (FACTS) devices are found to be very effective in a transmission network for better utilization of its existing facilities without sacrificing the desired stability margin.The Static Synchronous Compensator (STATCOM) is a shunt device which employs one of the latest technologies of FACTS and power electronic switching devices in electric power transmission systems to control the voltage and power flow. The STATCOMregulates the voltage at its terminal by controlling the amount of reactive power injected into or absorbed from the power system.Whilst the Iraqi National (400 kV) Super High Voltage Grid System suffers from voltage stability problems because of the high variation in the reactive power conditions all over the year seasons. Therefore, this thesis proposed an application of the STATCOM devices to maintain the voltages within the specified limits and enhancing voltage stability for all seasons in the year, as well as reducing the apparent power losses. And in order to reduce therequired installation cost of the STATCOM devices, this performance has been done by using minimum possible size of the reactive power injected or absorbed by the STATCOM devices, while satisfying the stability limits.The benefit of the STATCOM devices depends greatly on how these devices can be placed in the system. The general problem focused in this thesis was how to optimally determine the locations and the sizes of the STATCOM devices that to be installed. For thatreason, it was decided to follow an optimization approach such as a Genetic Algorithm (GA), which is one of the heuristic methods to find the optimum location and the value of installed STATCOM devices.The Newton - Raphson load flow method, with the proposed approach has been examined and tested first on the 5 - bus IEEE test system; the results obtained encouraged us to implement the same approach on the 27 - bus Iraqi National (400kV) SHV Grid System.The real data for Iraqi network have been taken from Iraqi National Control Center (INCC), in the Ministry of Electricity.computer program, written in MatLab environment, was developed to represent the proposed method.

خوارزمية جديدة لنظام اخفاء المعلومات == New Algorithm For A Steganography System

اسم المؤلف: مروة جليل محسن

اسم المشرف: اثير علاء صبري

الموضوع العام: هندسة الكهرباء والالكترون والاتصالات

السنة: 2014

الموضوع الدقيق: هندسة الاتصالات

الدرجة: ماجستير

الجامعة: الجامعة التكنولوجية - قسم الهندسة الكهربائية

اللغة: الانكليزية

مكان الجامعة: بغداد

الصفحات الاولى:

المستخلص: This thesis presents a new steganographic algorithm for embedding encrypted secret image in grayscale and color images to provide high level security of data for communication over unsecured channels.The proposed algorithm combine the features of Cryptography and Steganography. The hidden secret message capacity, stego - image quality and security are three important conditions for data hiding technology. According to these requirements, an effective security protection with high hiding capacity steganographic algorithms are proposed based on frequency domain of the cover and the secret image.The proposed algorithm first analyzes the secret image into its frequency components using Discrete wavelet transform (DWT) , Wavelet packet transform(WPT) , Multiwavelet transform(MWT) , and slantlet transform(SLT) , respectively. Then the low frequencycomponent of the secret image is encrypted using Advanced encrypted standard (AES) method and then embedded in the insensitive mid and high sub - bands obtained from the cover image after applying these transformations (mentioned earlier) on it. The embedding method used in this thesis is LSB (Least significant bit ) method. The resulting stego image from different algorithms are then compared..The effectiveness of the proposed algorithm has been estimated by computing Mean square error (MSE) ,signal to noise ratio (SNR), Peak Signal to Noise Ratio (PSNR) and the capacity.The best algorithm is obtained by using 2level - DWT for cover image and 1level - DWT or WPT for secret image because the capacity of the hidden secret data and stego image quality are improved. The embedding image reaches to half the size of cover image at same time PSNR reach to 62 dB and MSE about 0.036 and this is better than many other existence algorithms.By both objective and subjective observations, the resultant stegoimage that will be transmitted does not draw any suspicion, so the main goal of steganography is achieved..The language used for testing the algorithms is MATLAB R2013a, with a computer of the following specification ; Processor : Intel(R) Core(TM) i5 CPU M430 @ 2.27GHz and RAM - 3GBytes.

اخفاء العلامة المائية الرقمية باستخدام تحويل الموجيات ذات عامل جودة قابل للتعديل == Digital Watermarking Based On Tunable Q - Wavelet Transform

اسم المؤلف: هاجر احمد ابراهيم

اسم المشرف: اثير علاء صبري

الموضوع العام: هندسة الكهرباء والالكترون والاتصالات

السنة: 2014

الموضوع الدقيق: هندسة الاتصالات

الدرجة: ماجستير

الجامعة: الجامعة التكنولوجية - قسم الهندسة الكهربائية

اللغة: الانكليزية

مكان الجامعة: بغداد

الصفحات الاولى:

المستخلص: لقد دخلنا عصر حيث المعدات غير المكلفة متوفرة ويمكن من خلالها انتاج نسخ كاملة من المواد المتعددة الوسائط الرقمية مثل صوتيات بجودة القرص المضغوط ونشر صور عالية الجودة او مقاطع الفيديو الرقمية. من خلال هذه البيئة اصبح من السهل على الجهات غير المختصة انتاج ن | We have entered an era where inexpensive and readily available equipment can produce perfect copies of digital multimedia materials, such as CD - quality audio, publication - quality images, or digital video. In this environment, it has become easier for malicious parties to make salable copies of copyrighted content without compensation to the content owner.Many media content owners are concerned about the potential loss of revenue from multimedia piracy, especially when the content will be exposed to the Internet. Digital watermarking is seen by many as a potential solution to this problem.In this thesis, two proposed methods one for grayscale image watermarking and the other for color image watermarking are suggested. They require the original image for watermark extraction and they are belonging to the wavelet domain watermarking. They exploit the Tunable Q_Wavelet Transform. Therefore, different cases are performed to identify the best among them for the proposed application. As a result of the testing process, the best case is founded when ( Q=4, r=8, J=28). The first proposed method can be used with applications requiring high degree of imperceptibility and high security. The embedding process of this method is based on adding the pseudorandom watermark bits in the largest TQWT coefficient.The second proposed method is more robust against distortions than the first proposed method and is characterized by an acceptable degree of imperceptibility and high security. The embedding process of this method is based on adding the compound watermark image to the original color image.They are performed using MATLAB7 programming language. Different images are tested and the watermark is extracted exactly from the watermarked images.The Peak Signal to Noise Ratio “PSNR” using best case for the two proposed methods is found (77.97) dB for the first method and (51.14) dB for the second method.