عرض: 25 50 75 100 النتائج

نتائج البحث: 25 من أصل 344

دراسة الصفات الحرارية والميكانيكية وعمر الاداء PVC لبوليمر == Study of the Thermal, Mechanical Properties and Lifetime of PVC Polymer

اسم المؤلف: صهيب صباح احمد
اسم المشرف: وداد حمدي جاسم | محمد عبد النبي ثجيل
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: In this work, mechanical behavior of PVC product like pipes with different origins (K.S.A and Egypt) and Turkey doors with different manufacturing (Nova and Firat) which are used in Iraqi markets were studied.The objective of this work was to study the mechanical properties like ultimate tensile strength, Young's modulus, elongation at Max., elongation at break, impact strength, flexural strength and hardness of the pipes and doors.The experimental results show that K.S.A pipes exhibited maximum ultimate tensile strength and Young's modulus than that the Egypt pipes.However, the Egypt pipes exhibited maximum elongation at Max. and elongation at break when compared with K.S.A pipes.All the tensile properties of Firat doors are greater than that of Nova doors.Comparison of the flexural strength of pipes and doors. The pipes have the same flexural strength but the Firat doors have maximum value than Nova doors.Egypt pipes have a higher impact strength than K.S.A pipes. While the Firat doors have a higher impact strength than Nova doors. The experimental results of hardness Shore D indicated that K.S.A pipes exhibited maximum hardness number (83.7) than Egypt one, while the Firat and Nova doors have the same values.In this study, thermal properties of Firat and Nova have been evaluated, firstly by thermal conductivity and second by thermal stability and degradation. The Firat doors have better thermal conductivity than that of Nova doors. From the thermogravimetric analysis at different heating rates (2, 5, 10, 20 and 40 °C/min). The Firat doors have a higher thermal stability than Nova one.The Egypt pipes exhibited more thermal stability than the K.S.A pipes.From the TGA curves the activation energy of pipes and doors are determined at different conversion levels. At 30% conversion level when the mechanism of degradation would be stable and the value of activation energy of Egypt pipes and Firat doors is (108.35 KJ/mole) when it is (101.39 KJ/mole) for K.S.A pipes and (98.35 KJ/mole) for Nova doors. Thermogravimetric analysis (TGA) provides a method for accelerating the lifetime testing of polymers so that short - term experiments can be used to predict in use lifetime.The lifetime is decreased with increase of the temperature, at fixed temperature like 70 °C the lifetime of Egypt pipes is (≈100 years) while lifetime of K.S.A pipes is (≈21 years). At the same temperature (70 °C) the lifetime of Firat doors is (≈72 years) while the lifetime of Nova doors is (≈21 years).Thermomechanical analysis (TMA) test showed the glass transition temperature (Tg) and softening point (Ts) for pipes and doors. The K.S.A pipes have value for Tg and Ts higher than that of Egypt pipes, while the Firat and Nova doors have the same values.

خصائص التفريغ الكهربائي لمنظومة بلازما المايكنترون (PM) للتيارات المستمرة ذات الاقطاب المستوية == Electrical discharge characterizations of dc - planar magnetron (PM) Plasma device

اسم المؤلف: شيماء حسين عبد مسلم
اسم المشرف: ابراهيم رمضان عاكول | محمد خماس خلف
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: فيزياء البلازما
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا العمل, تم تصميم وتصنيع الماكنترون ذو الاقطاب المستوية لمنظومة الترذيذ بالبلارما وقد تم توليد المجال المغناطيسي للماكنترون بطريقتين , الاولى باستخدام ملف كهرومغناطيسي.والطريقة الثانية لتوليد المجال المغناطيسي هي باستخدام زوج من المغانط الدائمة .درست مميزات التيار - الفولتية لمسافات مختلفة بين الاقطاب ,ضغط الغاز, وتغير نسب خلط غاز الاركون الى غاز الاوكسجين وشدة مجال مغناطيسي مختلف .وقد بينت النتائج ان التفريغ ضمن منطقة التفريغ التوهجي غير الطبيعي. وان افضل مسافة بين الاقطاب هي 4.5 cm.وقد وجد ان تيار التفريغ يقل بزيادة نسبة غز الاوكسجين ويزداد بزيادة شدة المجال المغناطيسي.وقد تم الحصول على منحني باشن لمسافات بين الاقطاب مختلفة,ونسب خلط لغازي الاركون - الاوكسجين مختلفة , وشدة مجال مغناطيسي ومادة قطب مختلفة .كما تم دراسة تاثير المجال المغناطيسي على كفاءة التاين.تمت دراسة تاثير المجال المغناطيسي على معلمات البلازما باستخدام مجس لانكماير المفرد. وقد وجد ان درجة حرارة الالكترون(Te) تقل بزيادة ضغط الغاز والمجال المغناطيسي, كما لوحظ وجود درجتي حرارة للالكترون عند تسليط مجال مغناطيسي تبعا لمنشاها. بينما وجد ان كثافة الالكترونات تزداد بزيادة كلا من ضغط الغاز والمجال المغناطيسي.حضرت اكاسيد النحاس والالمنيوم والنيكل باستخدام منظومة ترذيذ البلازما بالماكنترون ذو الاقطاب المستوية للتيارات المستمرة على قواعد زجاجية بنفس الظروف (الفولتية المسلطة 1200 فولت,المسافة 4.5 cm , الضغوط تغيرت ما بين mbar (0.05 - 0.14) نسبة(9/1)Ar/O2 وB = 200Gauss).من القياسات البصرية وجدت ان اغشية CuO اظهرت النفاذية في نطاق 78 - 86٪ في حين انها كانت بين 82 - 91٪ و86 - 90٪ لل Al2O3 وNiO على التوالي. فجوة الطاقة البصرية انخفضت بشكل طفيف مع زيادة ضغط العمل، فاغشية CuO لديها فجوات الطاقة المباشرة (Eg) (تقل 2.35 - 1.95eV) انخفضت فجوة الطاقة Al2O3 من 4.2 eV الى 3.8 ، والفجوة NiO 4.1 - 3.9 eV)) عند زيادة الضغط mbar (0.05 - 0.14).اظهرت نتائج تحليل حيود الاشعة السينية ان بنية الاغشية CuO هو متعددة البلورات ذات تركيب احادي الميل الاتجاه المفضل في (110) و(111). بينما يظهر Al2O3 طبيعة عشوائية. وحددت الاغشية NiO ان تكون الطابع متعدد التبلور مع بنية مكعب على طول (111) و(101) التوجه. وعلاوة على ذلك، تم العثور على Ni2O3 بواسطة حيود الاشعة السينية.وقد تم دراسة مورفولوجية سطح اغشيه CuO، Al2O3، وNiO باستخدام مجهر القوة الذرية (AFM)، ومجهر الماسح الالكتروني (SEM) واظهرت النتيجة ان كل الاغشية لها حجم نانوي ، ويزداد الحجم الحبيبي مع زيادة ضغط العمل .وقد تم قياس حساسية الافلام CuO، Al2O3، وNiO لغاز NO2 في الهواء المحيط في نظام الاستشعار الغاز. تم اختبار جميع العينات بنسبة 3٪ NO2 والجهد التحيز (6 فولت).اقصى حساسية لCuO هي (43%)مع وقت استجابة سريع (11.7s) ووقت الاسترداد (17.1s) ووجد ان افضل درجة حرارة عمل للمتحسس 170oC. وحساسية NiO في الضغط الامثل ( mbar0.08) 11.86% مع زمن الاستجابة (47.7s) ووقت الاسترداد (35.1s) في افضل درجة حرارة عمل للمتحسس 180 درجة مئوية. بينما لا استجابة Al2O3لغازNO2 .تم داسة خصائص اغشية اوكسيد النيكل الالكتروماتيكية ,حيث وجد من القياسات البصرية باستخدام اللوكس ميتر ,ان ضغط العمل الامثل كان 0.08 ملي بار حيث تمتلك الاغشية المحضرة نفاذية اعلى في حالة التبيض، ومعامل امتصاص اكبر عند عكس القطبية المسلطة ، مقارنة مع ضغوط العمل اخرى. | In this work, a DC planar magnetron of plasma sputtering device has been designed and constructed. The magnetic field of magnetron generated by using two ways, firstly, electromagnetic coil. Secondly the magnetic field generated by pair of permanent magnets. The current - voltage characteristics have been studied at different inter - electrodes spacing, gas pressure, argon - oxygen mixture, and magnetic field strength. The result shown that the discharge is operating in the abnormal glow region. The optimum inter - electrode spacing was 4.5cm, and the discharge current decreased by increasing O2 percentage and increased by increasing magnetic field strength. Paschen curves have been obtained at different inter - electrodes spacing, argon - oxygen mixture, magnetic field strength and cathode materials. Also the effect of magnetic field on the ionization efficiency has been studied. The effect of magnetic field on plasma parameters are investigated by using a single Langmuir probe. It is found that the electron temperature decreases with increased working pressure and magnetic field, also when the magnetic field applied the probe measured two electron temperatures (Te) according to their origin. While electron density increased with both increasing working gas pressure and magnetic field strength Copper oxide, aluminum oxide, and nickel oxide thin films are prepared using dc - planar magnetron plasma sputtering system on the glass substrate at the same conditions( applied voltage (1200 volt) distance 4.5 cm working pressure varied between (0.05 - 0.14)mbar (9/1) Ar/O2 ratio and B=200 Gauss. From optical measurements have found that, the CuO thin films have showed transmittance in 78 - 86% range whereas it was in between 82 - 91% and 86 - 90% for the Al2O3 and NiO thin films respectively. The optical energy gap decreased slightly with increase working pressure, since CuO films have the direct energy gaps (Eg) (2. 35eV decreases to 1.95eV), Al2O3 band gap decreased from 4.2 eV to 3.8 eV , and band gap of NiO (4.1 to 3.9 eV) at pressure increased from 0.05 to 0.14 mbar. X - Ray diffraction analysis have showed that the structure of CuO films is polycrystalline with monoclinic structure and preferential orientation in the (110), and(111) directions. While Al2O3 shows amorphous nature. The NiO films are identified to be polycrystalline nature with cubic structure along (111) and (101)orientation. Furthermore, Ni2O3 is found by XRD. The surface morphology of CuO, Al2O3, and NiO thin films have been studied by using Atomic Force Microscope (AFM) and Scanning Electron Microscope (SEM). The result is showed that all film had nano size structure, and the grain size increased with increased working pressure.The sensitivity of CuO, Al2O3, and NiO films to NO2 gas in air ambient has been measured in gas sensing system. All samples are tested at 3% NO2 and bias voltage (6 volt). The maximum sensitivity of CuO is (43%) with the fast response time (11.7s) and recovery time of (17.1s) at optimal operating temperature 443.15 kelvin. And the sensitivity of NiO at the optimum pressure (0.08 mbar) is found 11.86% with the response time (47.7s) and recovery time of (35.1s) at optimum operating temperature 180 oC, While Al2O3 not response towards NO2gas. Electrochromic (EC) properties of nickel oxide films have been studied, They were characterized by optical measurements by using lux meter ,the optimizing working pressure was 0.08 mbar, since the prepared films have a higher transmittance in the bleached state, and larger absorptance when the opposite polarity was applied, compared to another working pressures.

دراسة تحليلية للحام بالليزر على الخواص الحرارية - الميكانيكية للبوليمرات باستخدام برنامج ANSYS == Analysis Study of Laser Welding on Thermal - Mechanical Properties of Polymers Using ANSYS Program

اسم المؤلف: زينه يونس علي
اسم المشرف: خالد هادي مهدي العبيدي | ندى فاضل توفيق
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: الخلاصةان الهدف من هذه الدراسة, هو التنبؤ بسلوك المواد من حيث الخصائص التركيبية ,الحرارية والميكانيكية اثناء عملية اللحام في 3 - D. ان دراسة الخصائص التركيبية للمادة قد تم باعتبارها دالة لدرجة حرارة الانتقال الزجاجي T_g, ودرجة حرارة الانصهار T_m, وتغير الطور بينما يتم دراسة الخصائص الحرارية وفقا لتوزيع درجات الحرارة, والتدرج الحراري, والفيض الحراري, واخيرا يتم دراسة الخواص الميكانيكية بواسطة الاجهاد والمطاوعة.لقد تم تبني طريقة FEM لمحاكاة عملية اللحام لقطعتين متشابهتين ومختلفتين من مادة البولي بروبلين والبولي ستيرين في ثلاثة ابعاد. ان تحليل الخصائص الحرارية والميكانيكية لبوليمر البولي بروبلين والبولي ستيرين قد تم بدلالة كل من نموذج الحالة المستقرة والنموذج المتنقل باستخدام برنامج ((ANSYS 11. حيث ربط نموذج الحالة المستقرة (اعتبرت انها الحمل الابتدائي) مع نموذج الحالة المتنقلة بافتراض وجود الحمل الحراري والميكانيكي سوية بنفس الوقت على اعتبار ثبوت سرعة اللحام عند20ملي/ثانية ودرجة الحرارة عند 298م, وكذلك تم اختبار تاثير قدرة الليزر باستخدام ثلاثة قيم 50) (150,100 واط, كذلك درست تاثير نصف قطر بقعة الليزر على خصائص البوليمرات المستخدمة.بينت النتائج العددية قابلية لحام كل من المادتين البولي بروبلين والبولي ستيرين بهذه الطريقة, حيث لوحظ تناقص التشوهات الحرارية والميكانيكية الناجمة عن اللحام, كما يشير الشكل الهندسي هذه الاجهادات الى جودة اللحام. وبينت الدراسة ان كل من الفيض الحراري والانحدار الحراري يكون عند اعظم قيمها في اتجاه y - axis وهو اتجاه تسليط الليزر, وكانت درجة الحرارة العظمى في لحام كل من PP - PPو PP - PS هي ((351.4kو (425.9k) على التوالي. اما الاجهادات الميكانيكية فقد كانت واطئة في كل من PP - PPو PP - PS بحدود (0.181*〖10〗^9MPa ) و(0.166*〖10〗^9MPa) والمطاوعة (0.171) و(0.142) لكل من PP - PP وPP - PS على التوالي. واخيرا، لوحظ صغر مساحة المنطقة المتاثرة حراريا اذ كانت بحدود (9.2 〖mm〗^2) بالنسبة ل PP - PP، في حين اظهر عمق الاختراق تحسن مقارنة مع الاساليب المستخدمة، حيث كانت قيمته بحدود (2.5mm), اما في نموذج المتنقل فقد لوحظ تضاعف المساحة المتاثرة وعمق اختراق قريب من نتائج النموذج المستقر. | The aims of this study is to estimate the material behavior properties in terms of its structure, thermal and mechanical properties during welding process in 3 - D. The structure is studied as a function of T_m , T_g and phase change. While the thermal is investigated according to thermal distribution, thermal gradient and thermal flux. Finally the mechanical is examined by stress and strain.Finite element method is adopted to simulate welding process of two similar and dissimilar pieces of polypropylene and polystyrene in 3 - D.The analytical of thermal and mechanical properties is done in terms of steady - state model and transient model using ANSYS 11 program, then coupling the steady - state with transient model by supposed existing thermal and mechanical loads together in same time. Laser power effect on welding is investigated by three powers (50,100,and 150watt) and by laser spot radius (1mm, and 2mm), the welding speed is supposed constant at (20mm/sec).Numerical results show that the ability of this method to joined polymers material PP and PS, where it is noticed that the thermal and mechanical deformations are reduced, also the geometry shape of welding zone is indicated to a good quality of welding.From this study, the thermal gradient and thermal flux are at their maximum values at y - axis, in which the laser direction, and T_max in PP - PP and PP - PS joints are (351.4k) and (425.9k) respectively. Mechanical stresses and strains had low values, about (0.181*〖10〗^9MPa) and (0.166*〖10〗^9 MPa) and strain are about (0.171) and (0.142) for PP - PP and PP - 1PS joint respectively.Finally, it is observed that narrow HAZ area (9.2〖mm〗^2) of PP - PP joint, while penetration depth shows improvement comparing with usual methods, it's value is (2.5mm). In transient model it observes that multiples of HAZ area, and D_p is near its value in steady - state model.

قياس المواد المشعة الطبيعية المنشا NORM والتراكيز الصناعية للمواد المشعة الطبيعية المنشا TE - NORM في حقل الاحدب النفطي == Natural Occurring Radioactive Materials (NORM) and Technologically Enhanced NORM (TE - NORM) Measurements in AHDEB Oil Field

اسم المؤلف: زينب محمد حسن الزبيدي
اسم المشرف: هادي دويج العتابي | شفيق شاكر شفيق
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: واسط
الصفحات الاولى:
المستخلص: The activity concentrations of radium - 226 (226Ra), actinium - 228 (228Ac) and potassium - 40 (40K), which represent the main naturally occurring radioactive material (NORM), were measured in the oil stations of AHDEB oil field in Wassit governorate in Iraq. These activity concentrations were determined using gamma - ray spectroscopy with a hyper - pure germanium (HPGe) and sodium iodide (NaI (Tl)) detectors.The activity concentrations of the obtained data of the crude oil samples were revealed that the overall average specific activity (SA) for 226Ra, 228Ac and 40K were 174.72, 43.46 and 355.07 BqL ⁄. While, the maximum SA values of 226Ra and 228Ac were 212.30 and 52.42 Bq/L for the Crude oil sample taken from the well 32 of the layers of Musharraf oil field, and the maximum SA value of 40K was 465.35 Bq/L for Crude - oil sample taken from the Rumaila layer of the first well. The minimum SA values of 226Ra, 228Ac and 40K were 126.37, 30.59, and 229.98 Bq/L for the Crude oil sample under Hydrostatic pressure.The hazard indices have been calculated in the present work, which include radium equivalent activities (Raeq), gamma dose rate (D), external hazard index (Hex), internal hazard index (Hin), annual effective dose which include indoor and outdoor effective dose rate (E) in units of mSv/y and representative level index (Iγr), respectively. The overall average value of Raeq for the crude oil samples set was 264.21BqL⁄. This value is also considered to be normal (UNSCEAR, 1993). The highest Raeq was 311.01 Bq/L for sample taken from the Rumaila layer of the first well and the minimum value was 187.82 BqL⁄.The overall average value D for the full sample set was found to be 122.52 nGyh⁄. The highest value was 144.51 nGyh⁄ that was higher than the permissible value and the minimum value was 86.97 nGyh⁄.The overall average values of Hex and Hin were 0.7138 and 1.1861, respectively. The highest values of Hex and Hin were 0.8403 and 1.3861 and the minimum values were 0.5075 and 0.8403. The overall average value of Iγr was 1.8361. The highest value was 1.3017 and the minimum value was 2.1687. The overall average values of the Eied and Eoed were 0.259 and 0.0648 mSvy⁄.The highest values of Eied and Eoed in mSvy⁄ were 0.7089 and 0.1772 and the minimum values were 0.4266 and 0.1067.For sludge samples, the obtained data revealed that the average activity concentrations for 226Ra, 228Ac and 40K for these set of samples had the values; 340.1, 90.70 and 491.75 Bqkg⁄, respectively. The maximum activity concentrations of 226Ra, 228Ac and 40K were 573.38, 150.89, and 705.26 Bqkg⁄ appeared and the minimum concentrations were 178.64, 54.13, and 273.32 Bqkg⁄. The average value of Raeq was 507.71 Bqkg ⁄, the maximum value was 843.46 Bqkg⁄ and the minimum value was 277.10 Bqkg⁄. The average value of D for the full sample set was found to be 233.98 nGyh⁄. While the maximum value was 388.01 and the minimum value was 127.55 nGyh⁄. The average values of Hex and Hin were 1.372 and 2.291, respectively. The maximum values of Hex and Hin were 2.279 and 3.829 and the minimum values were 0.749 and 1.231. The average values of the Eied and Eoed were calculated to be 1.148 and 0.287 mSvy⁄. The maximum values of Eied and Eoed were 1.903 and 0.476 mSvy⁄ for SL2 sample, and the minimum values were 0.626 and 0.156 for SL6 sample. The overall average value of Iγr was 0.289, whereas the maximum value was 5.802 and the minimum value was 1.914.For ground water, the obtained data revealed that the average activity concentrations for 226Ra, 228Ac and 40K for these set of samples had the values; 25.05, 7.59 and 35.17 BqL,⁄ respectively. The maximum activity concentrations of 226Ra, 228Ac and 40K were 50.29, 15.24, and 76.94 BqL⁄ and the minimum activity concentrations were 13.70, 4.15, and 8.36 BqL⁄. The average value of Raeq was 38.61 BqL ⁄, the maximum value was 78.01 BqL⁄and the minimum value was 277.10 BqL⁄ for W3 sample. The average value of D was 17.75 nGyh⁄. The maximum value was 35.91 nGyh⁄ and the minimum value was 0.092 nGyh⁄. The average values of the Hex and Hin were 0.10 and 0.172, respectively. The maximum values of Hex and Hin were 0.211 and 0.347 and the minimum values were 0.055 and 0.092. The average values of the Eied and Eoed were 0.087 and 0.022 mSvy⁄, respectively. The maximum value of Eied was 0.176 mSvy⁄ and the minimum value was 0.045 mSvy⁄. Whereas the maximum value of Eoed was 0.044 mSvy⁄ and the minimum value was 0.011 mSvy⁄. The average value of Iγr was 0.226. The maximum value was 0.539 and the minimum value was 0.138.For radon (222Rn) measurements, the overall average values of the measured and calculated parameters were 296.64 Bq/m3, 118.65 Bq/m3, 1.651 WLM, 7.48 mSv/y, and 4490 for radon concentration, equilibrium equivalent 222Rn concentration, working level month, annual Effective Dose, and Excess Lung Cancer per Million Persons per Year (ECL).The background radiation of AHDEB oil field was measured and it is noted that this radiation backgrounds were ranged from 50 to 148 nSv.h - 1 with an overall average value of 80.64 nSv.h - 1.List of contents Title Page

الاستقرارية الفيزيائية - الكيميائية للمتراكبات PVA - MnSO4.H2O مع الظروف الجوية == Physico - Chemical Stability of (PVA - MnSO4.H2O) Composites against weather conditions

اسم المؤلف: زينب كاظم حمزة
اسم المشرف: اسرار عبد المنعم سعيد
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الدراسه تم تحضير افلام بولي فينيل الكحول وكبريتات المنغنيز المائي باستخدام تقنية الصب مع نسب وزنية مختلفة وهي (2, 5, 10, 15) من كبريتات المنغنيز المائي وقد تم دراسة الخصائص البصريه لها.وقد تضمن هذا العمل ايضا دراسة تاثير الظروف الجوية على الخصائص البصرية لكل النماذج المعرضة.كل النماذج المعرضة وغير معرضة للظروف الجويه شخصت بطرق مختلفة مثل التحليل الطيفي لاشعة تحت الت الحمراء (FTIR)وصور المجهر الضوئي.اظهرت النتائج التجريبية ان طيف الامتصاصيه يزداد بزيادة تركيز كبريتات المنغنيز المائي. فجوة الطاقة تقل بزيادة تركيز الاضافة. وقد تم دراسة الثوابت البصرية الاخرى والتي تشمل (معامل الامتصاص, معامل الخمود, معامل الانكسار, ثابت العزل الحقيقي والخيالي).بعدتعريض النماذج للبولي فينيل الكحول النقي وللمتراكبات (PVA - MnSO4.H2O) وبتراكيز مختلفه وجد ان طيف الامتصاص يزداد بزيادة فترة التعريض. فجوة الطاقه تقل بزيادة فترة التعريض. وقد تم دراسة الثوابت البصريه الاخرى والتي تشمل (معامل الامتصاص, معامل الخمود, معامل الانكسار, ثابت العزل الحقيقي والخيالي).وقد بين طيف (FTIR) عدم وجود تفاعل كيميائي بين المادة المضافة والبوليمر وليس هنالك تكسر بالاواصر الاساسيه لهما بعد التعريض للظروف الجوية, واظهرت صور المجهر الضوئي ان كل النماذج تصبح اكثر خشونة بعد التعريض. | In this study, (PVA - MnSO4.H2O) films are prepared by using casting technique with different concentration of Manganese (II) sulfates monohydrate (2, 5, 10 and 15) wt.% . Also the optical properties is studied, and this work is involved with study the effect of weathering condition of optical properties for all samples which exposure. All the samples that exposure and unexposure to weather conditions have diagnosed by different methods such as fouirer transform infrared spectroscopy (FTIR) and optical microscope images. The experimental results show that the absorption spectrum increased with increasing the concentration of (MnSO4.H2O). The optical energy gap decreasing with increasing of the concentration of the additive. The optical constants (absorption coefficient, extinction coefficient, refractive index, real and imaginary dielectric constants) are studied. After exposure the samples in the form of pure PVA and (PVA - MnSO4.H2O) composites with different concentration found that the absorption spectrum increases with increases exposure time. The optical energy gap decreasing with increasing exposure time. The optical constants (absorption coefficient, extinction coefficient, refractive index, real and imaginary dielectric constants) are studied. The FTIR shows no chemical interaction between the Polymer and the additives and there are no broken fundamental bands after exposure to the weather conditions. Morphological photographs illustrate that the surface of all films become more roughness after exposure.

تصميم وتصنيع الطلاء المضاد للانعكاس معتمدين طريقة الليزر النبضي في الترسيب == DESIGN AND FABRICATION OF ANTI REFLECTION COATING BY PULSED LASER DEPOSITION

اسم المؤلف: زينب حازم عبد الرحيم
اسم المشرف: الاء نزار عبد الغفار | كاظم عبد الواحد عادم
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا العمل تم تصميم طلاء المضاد للانعكاس بسمك ربع ولاربع طول موجي ودراسة خصائص بصرية للاغشية الرقيقة والاستفادة منهما في تصنيع طلاء مضاد للانعكاس ضمن المنطقة المرئية والحمراء القريبة . اعتمد تصميم الطلاء على مفهومين اساسيين هما نظرية المصفوفة المميزة وتصميم طلاء بسمك ليس ربع طول موجي ولحالة السقوط العمودي للضوء.اخذين بنظر الاعتبار ظاهرة التشتت. تم دراسة نفاذية وانعكاسية الطلاء كدالة للتغير في الطول الموجي للضوء الساقط باستخدام الرزمة البرمجية MATLAB. اوضحت نتائج التصميم امكانية الحصول على انعكاسية واطئة لمدى واسع من الطيف الكهرومغناطسي يشمل المنطقة المرئية ومنطقة الحمراء القريبة عندما يكون السمك البصري ضمن المدى اقل 0.7L لمادة MgF2 المرسبة على الزجاج ويكافي الاسماك الهندسية للغشاء (34.5,36.91,78.3) نانومتر, وامكانية الحصول على انعكاسية واطئة لمدى واسع في درجة حرارة التلدين عند سمك البصري 1.2L ويكافى السمك الهندسي ((141.6 نانومتر. تكتسب هذه النتيجة اهميتها في امكانية تخمين السمك الامثل قبل البدء بمرحلة التحضير حيث اشارت النتائج الى معادلة تجريبية تربط بين عدد النبضات وسمك الغشاء. لغرض تصنيع الطلاءالبصري, تم استخدام طريقة الترسيب بالليزر النبضي لليزر النيديميوم - ياك1064 نانومتر الذي يعامل بتقنية التولد المتوافق الثاني بطول موجي 532 نانومتر والذي يعمل بتقنية عامل النوعية بمعدل تكرارية (1 - 6) هرتز وامد نبضة 10 نانوثانية. لتحضير اغشية فلوريد المغنيسيوم المرسبة على الزجاج, قمنا بدراسة ظروف التحضير التي تتضمن التغير بعدد النبضات (150و250 و350و 450 نبضة) لترسيب اغشية فلوريد المغنيسيوم ومدى تاثيرهم على سمك الاغشية المحضرة وتركيبها وحجم الحبيبات وبالتالي على نفاذيته ومدى امكانية استخدامه كطلاء مضاد للانعكاس. لقياس سمك الاغشية المحضرة, تم استخدام جهاز مقياس اللبسومتر وتم استخدام جهاز المطياف لايجاد النفاذية والانعكاسية والثوابت البصرية ومعاملي الانكسار والتوهين (n, k) وعلى التوالي. اوضحت النتائج بان الطلاء المضاد للانعكاس المحضر من طبقة واحدة يمتلك نفاذية عالية وانعكاسية واطئة تشمل منطقتين من الطيف المرئية والحمراء القريبة وان معامل الانكسار يتراوح بين (1.05 - 1.25( في حين كانت اسماك الاغشية المحضره تتراوح بين )34.5 - 141.6 ) نانومتر, كذلك اوضحت صور (AFM) بان الحجم الحبيبي يتراوح ضمن المدى (86.55 - 94.81) نانومتر. | In this work design and fabricated antireflection coating (AR’C) with single layer. Design of the AR’C was based on the characteristic matrix method with quarter and non - quarter optical thickness. The effect of deposited material at normal incident of light was taken into account and the reflection performance was computed with the aid of MATLAB over the visible and near infrared region. Results show that wideband AR’C was achieved when deposited thin film of MgF2 on glass with non - quarter optical thickness less 0.7L related to geometrical thickness (34.5,36.9,78.3 nm) at room temperature. Also wideband AR’C achieved with non quarter 1.2L optical thickness deposited related to geometrical thickness (141.6nm) at annealing temperature. However results accept significant importance to estimate the optimum thickness before preparation stage. In this study antireflection coating fabricated by using pulsed laser deposition technique (PLD) which deposit MgF2film on glass substrate. Q - switching Nd : YAG laser beam with second harmonic generation (SHG) technique of wavelength 1064 nm and 532 nm, repetition rate 1 - 6 Hz and the pulse duration 10 ns was used. The film thickness, structural behavior and grain size dependent on that prepared conditions which include variation number of shot (150,250,350,450 pulses) have been studied.The thicknesses of MgF2 nanostructure films were measured using Lipsometre. Further, the experimental results shows high transmittance, wideband low reflection and the refractive index within the range (1.05 - 1.25), while the thicknesses are (34.5 - 141.6 nm). Atomic force microscope (AFM) image illustrate that the grain size of the film within the range (86.55 - 94.81) nm

الخواص التركيبية والبصرية والكهربائية لاغشية اوكسيد النيكل المحضرة بطريقة الترذيذ كمتحسس غازي == The structural, optical and electrical properties of NiO films prepared by RF - Sputtering as gas sensor

اسم المؤلف: زينب طارق عبد الحميد
اسم المشرف: قاسم عزيز محمد | محمد عبد النبي
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The structural, optical, electrical, and gas sensing properties of nickel oxide have been studied. The structural properties of the deposited films were made using XRD, SEM and AFM. The NiO films have been prepared with different thicknesses (100, 150 and 200) nm on glass, Si and Al2O3 substrates, using RF - sputtering at 100°C substrate temperature. The electrical and optical parameters of the NiO films were characterized using Hall Effect and transmittance measurements.The X - ray diffraction result indicates that the films are of polycrystalline in nature with cubic structure. The grain size of the nanoparticales observed at the surface depended of films thicknesses, where 200 nm has smallest average grain size 85.5 nm and RMS increased with increasing of thicknesses.The optical characterization shows that the film has band gap that ranged in between 3.6 eV to 3.9 eV, the average transmittance of films was found to be ranged of 60% to 85% in the VIS - IR regions. The dark conductivity of NiO films has been studied as a function of film thickness, crystal structure transformation and temperature with particular regard to gas sensitivity in CO2, NO2, CO, NO and the ethanol vapor. The electrical properties were found to be dependent on the film thickness.I - V characteristics for NiO films at (air, vacuum, N2, O2andCO2) gases before and after annealing were investigation. It would appear from our result that the diminution of the dark conductivity after annealing may be due to the surface contaminations adsorbed on the surface of the NiO film during film preparation or from ordinary atmospheric air.The resistivity of the NiO thin films decreased with increasing of thicknesses, from 1.5x105 to 5.4x104 (Ω.cm), which is related to the increase of carrier concentration with film thickness. The results of measurements of NiO thin films show that these films have good conductivities and results obtained from Hall Effect indicate that the NiO films were (p - type).It was found that the sensitivity to other gases differs for different film thicknesses and working temperature. Furthermore, NiO films exhibits high and fast response to NO2 gas at 200°C, which makes it a promising candidate for a poisonous gas sensing.

تحضير درع متعدد الطبقات وحساب عامل التراكم باستخدام انواع مختلفة مم البوليمرات == Multilayered Shielding Preparation and Buildup Factor Calculation Using Different Type of Polymers

اسم المؤلف: زهير سالم خميس
اسم المشرف: محمد قاسم الفخار | حارث ابراهيم جعفر
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: واسط
الصفحات الاولى:
المستخلص: Due to the possibility of producing secondary radiation when a radiation is being attenuated by a certain type of radiation shield, the use of multilayer shielding appears very useful. This study aims to investigate the use of multilayer materials as nuclear radiation shielding.The work presented in this thesis focuses on the possibility of using polymer materials as a nuclear shield. This polymer (high density polyethylene and epoxy) is chosen due to different reasons among which are its local availability, the ease of mixing additives with it, light weight, and flexibility. The polymer as a single shield was investigated, where five different forms of the polymer were used as a single shield. These kind of shield are polymer (High Density Polyethylene HDPE, and Epoxy) alone, HDPE with a 38%by weight of Pb (as an additive), Epoxy with a 33%by weight of Pb, and Epoxy with a 33% by weight of Al (as an additive). The attenuation coefficient (μ), and buildup factor (B) were measured for all five forms and composition. In particular, the attenuation coefficients were found to increase with the increasing of the Pb or Al additive and decrease with gamma rays energy increase, while the buildup factor where decrease with the increase of the Pb or Al additive and increase with the increasing of energy.On the other hands, the multilayer shielding materials were chosen to be either Al or Pb slides (with different thickness) with a slide of 2.8cm of polymer (HDPE or Epoxy) in different repeated combinations. In order to evaluate the values of μ and B for this multilayer composition, the values of μ and B for each Pb and Al were evaluated. Then these two values were estimated for the different combinations of the multilayer shields. In particular, it was found that placing the low Z material (polymer) in front of the detector [NaI(Tl) detector] first and then high Z material before that

تقييم المقاطع العرضية لليورانيوم للتفاعلات المستحثة بالنيوترون == Cross Sections Evaluation of Uranium for Neutron Induced Reactions

اسم المؤلف: روناك اكرام علي
اسم المشرف: ايمان طارق العلوي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: لقد تم في هذا البحث حساب قيم المقاطع العرضية لنظائر اليورانيوم (A=230 - 238) للتفاعلات المستحثة بالنيوترونات التالية ,,,(n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), (n,γ), (n,p), (n,t), (n,d), (n,α), (n,2α),and (n,2p)المقاسة بفترات مختلفة من الطاقة حيث ان هذه القراءات تم اخذها من الوكالة الدولية للطاقة الذرية (IAEA ) ومن المكتبات المشهورة عالميا مثل EXFOR, CINDA, ENDF, JEFF, JENDL,ROSFOND,CENDL,WIND, TENDL, BROND, IRDF, EAF وقد تم قياسها في الفترة الاولى من منتصف القرن الماضي وحتى اخر سنوات الماضية .لقد تم تحليل المديات الكاملة للطاقة لكل تفاعل وقد تم اعادة حساب وتقييم المقاطع العرضية ضمن فترات صغيرة مختلفة حسب مديات الطاقة للنيوترون القاصف مع الاخطاء المرافقة لها. قد تم وضع صيغ رياضية لمتعددة الحدود في معظم التفاعلات والتي تربط بين تغيير المقطع العرضي مع الطاقة والتي يمكن استخدامها للتنبىء بقيم المقاطع العرضية غير المحسوبة. لقد تم حساب قيمة Q - للتفاعل وطاقة الربط وطاقة العتبة وفرق الكتلة وعامل الرص لكل تفاعل ولكل عنصر هدف. ان التقييمات اعتمدت بشكل رئيسي على حسابات نموذج الجهد البصري لقد اعتمدت الحسابات على معاملات الجهد البصري النووي حيث تم اختيار وجمع المعلومات من مكتبة (RIPL) التابعة للوكالة الدولية للطاقة الذرية. لقد قمنا بدراسة صيغتين مختلفتين لنموذج الجهد البصري حيث ان الصيغة الاولى تسمى نموذج الجهد البصري القياسي والمعاملات ماخوذة من مكتبة Beijing والصيغة الثانية لنموذج الجهد البصري قد تم حسابها بتحديد ثلاث مديات طاقية. لقد قمنا بدراسة نسبة التفاعل (n,f) لكل نظير من نظائر اليورانيوم نسبة الى يورانيوم - 235 والذي يعتبر نموذج قياسي. لقد قمنا بحساب هذه النسبة لجميع التفاعلات المتوفرة لدينا وليس فقط تفاعل الانشطار واحتسبناها نسبة الى يورانيوم - 235.حساب اخر تم اضافته الى هذه الدراسة وهو دراسة تاثير التلوث لوليدة اليورانيوم - 237 والتي هي نبتونيوم - 237 بعمر نصفي 6.8 يوم وكذلك حساب الفيض النيوتروني لكل منهما. | The cross sections of Uranium isotopes (A=230 - 238) for the (n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), (n,γ), (n,p), (n,t), (n,d), (n,α), (n,2α),and (n,2p) reactions are calculated with different energy intervals which are collected from International Atomic Energy Agency (IAEA). The available cross sections data for the reactions mentioned above are collected from the well known international libraries like EXFOR, CINDA, ENDF, JEFF, JENDL, ROSFOND, CENDL, WIND, TENDL, BROND, IRDF, EAF and measured during the period from the middle of the last century up to several years ago.The cross sections are reproduced in fine steps of incident neutron energy in different intervals with the corresponding errors. The recommended cross sections for all available experimental data have been calculated for all considered reactions mathematical representative equations for all these reactions are formulated. These equations represent the variation of the cross section with energy, which could be used to predict the values of uncalculated cross sections.Q - value, threshold energy, binding energy, mass excess, and packing fraction for each reaction and target element have been also calculated.The evaluations are based mainly on the calculations of the optical model potential. The calculations are based on the nuclear optical potential, where the relevant parameters are collected and selected from Reference Input Parameter Library (RIPL) which is being developed under the international project coordinated by the International Atomic Energy Agency (IAEA). We study two different formula for optical model potential the first formula is the standard optical potential model and its parameters are taken from Beijing library. The second formula is the optical potential with different energy ranges. We study the ratio of the (n,f) cross sections for each Uranium isotopes relative to (n,f) cross section for U - 235 which could be considered as a standard sample. We have done the ratio not for the (n,f) cross sections only but also for other reactions like ,(n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), and (n,γ) relative to U - 235 reactions cross sections.Another evaluation is added to cross sections is the effect of the contamination of the daughter of U - 237 which the daughter is Np - 237 6.8day and their relative flux

دراسة تاثير المعاملة الحرارية على الخواص التركيبية والميكانيكية لبوليمر (بولي تيترافلورواثيلين) == Study the Effect of Heat Treatment on the Structural and Mechanical Properties for poly (tetrafluoroethylene

اسم المؤلف: رند باسم لطفي الكرخي
اسم المشرف: مي عبد الستار محمد نجيب
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: درس في هذا العمل نوعين من بولي تيترافلورواثيلين ( النقيين ولكن باختلاف الشركة المصنعة PTFE) (صيني _اماراتي ) بطريقه صب المحلول كافلام رقيقه واشرطة , بواسطه الخواص التركيبيه (حيود الاشعه السينيه ومسعريه المسح التفاضلي ) والخصائص الميكانيكية بدلاله درجات حراره مختلفة للدوره الحرارية . يبين كلا النوعين تغير في الشده المستطاره من المستوى القاعدي (100) عند تغير درجه حرارة الدورة الحرارية واظهر النوعين زيادة في التبلورية مع زياة درجة الحرارة .كذلك اختلاف في الانثالبي عند اختلاف درجات الحرارة حيث لوحظ زياة الانثالبي بزيادة درجة الحرارة واختلاف في الخصائص الميكانيكيه ( الاجهاد والانفعال عند نقطة الخضوع ونقطه الكسر ومعامل يونك) للبوليمر حيث اظهرت المعالجة الحرارية للبوليمر بدرجات حرارة مختلفة من اجل معرفة خصائصه ومقاومته الى الظروف البيئية ان الخواص الميكانيكية تزداد زيادة خطيا مع زيادة درجة الحرارة .لوحظ بان انتاج الشركه المصنعة الصينية افضل من ناحية النتائج لايجاد درجة التبلورية والخصائص الميكانيكيه عن انتاج الشركة المصنعة الاماراتية لنفس المادة البوليمرية | In this study two modifications of pure polytetrafluoroethylene (PTFE) [C2F4]n. China_UAE source prepared from solution cast as film and strip have been studied by structural (X - ray diffraction (XRD), Differential Scanning Calorimetry (DSC)) and mechanical properties .subjected to different temperature heating cycle. Both modifications show variation in the scattered X - ray intensity of the basal plane (100) as the temperature of heating cycle is changed and show increasing in crystallinity with the increase of temperature .Moreover, the Enthalpy of each kind is changed with difference of heat treatment where the enthalpy increase with the increase of temperature, and two modifications show different in mechanical properties for PTFE (young's modulus, stress at break, stress at yield, elongation at yield. And elongation at break) when the temperature is change ,The heat treatment of polymer to different temperatures in order to know its properties and resistance to environmental conditions results showed that the mechanical properties increase linearly with the increase of temperature.It seems that the product company of china is better than the product company of UAE in degree of crystallinity and mechanical properties for this polymer.

تصنيع ودراسة خصائص كاشف المفرق الهجين Cdo/ Si المشاب والمحضر بطريقة الرش الكيميائي الحراري == Fabrication &Characterization Heterojunction Photodetector of Cdo/ Si by Spray Pyrolysis Technique

اسم المؤلف: رفل صالح ساجت فياض
اسم المشرف: سعاد غفوري خليل العاني | رائد عبد الوهاب اسماعيل
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا البحث تصنيع ودراسة خصائص كاشف المفرق الهجين نوع CdO/p - Si المشوب اذ حضرت اغشية اوكسيد الكادميوم(CdO) بطريقة الرش الكيميائي الحراري وبدرجة حرارة قاعدة ثابتة 380o C) ) وبالتراكيز المولارية M(0.1, 0.15, 0.2, 0.25) وشوبت بعنصري النحاس والالمنيوم بنسب (0.5%, 1%, 3%, 5%) على الزجاج وعلى شرائح من السليكون احادية التبلور (Single Crystal) من نوع p - type ذات اتجاهية بلورية (100) ومقاومية كهربائية (2 - 20 Ω.cm) ومن نوع n - type ذات اتجاهية بلورية(100) ومقاومية كهربائية (10 Ω.cm) وسمك يتراوح بين (400 - 600 nm) .ودرست الخواص التركيبية والطوبوغرافية والبصرية والكهربائية لغشاء CdO بتغير التركيز المولاري وبثبوت درجة حرارة القاعدة (Ts) لقد اوضحت نتائج حيود الاشعة السينية ان اغشية CdO ذات تركيب بلوري مكعب وان اعلى شدة كانت عند المستوي (111) , اوضحت النتائج البصرية ان قيم فجوة الطاقة تعتمد بشكل كبير على التركيز المولاري اذ وجدت ان قيم فجوة الطاقة لغشاء CdO النقي كانت تتراوح مابين 2.61 eV الى 2.34 eV ولوحظ ان فجوة الطاقة تبدا بالنقصان مع زيادة التشويب بالالمنيوم والنحاس مقارنة مع اغشية CdO النقية . حيث ان فجوة الطاقة عند التشويب بالنحاس كانت تتراوح مابين 2.5 eVالى 2.31 eV وتتراوح مابين 2.62 eV الى 2.48 eV عند التشويب بالالمنيوم.اوضحت نتائج قياس تيار - جهد للكاشف الضوئي ان مقدار عامل المثالية (Ideality factor) للكواشف المحضرة بمولارية وتراكيز اشابة مختلفة يزداد مع زيادة التركيز المولاري وان افضل قيمة له كانت بحدود 1.7 عند تركيز 0.5% وبالنسبة لشوائب النحاس وبحدود 1.8 بالنسبة لشوائب الالمنيوم بتركيز 0.5% .اظهرت نتائج قياسات الاستجابية الطيفية ان الكواشف المصنعة تعمل ضمن المنطقة الطيفية (400 - 850nm) ووجود قمتين لكاشف (CdO/Si) المشوب وغير المشوب الاولى تقع عند الطول الموجي (550 nm) والتي تعود الى غشاء CdO والثانية عند الطول الموجي (800 nm) والتي تعود الى السليكون. لقد اوضحت نتائج الاستجابية الطيفية للضوء الابيض ان الكواشف تمتلك خصائص خطية جيدة ولاوجود لمنطقة اشباع وان هذه الخصائص تحسنت بعد الاشابة.تم حساب الكشفية النوعية للكواشف المصنعة ووجد انها تتغير مع ظروف التحضير حيث ان اعلى قيمة لها كانت بحدود 6*1011(HZ1/2.W - 1.cm) عند الطول الموجي 500nm وبلغت 7*1011(HZ1/2.W - 1.cm) عند الطول الموجي 700nm للكاشف المصنع CdO : Al/Si المشوب بتركيز 5% . | We discussed in this research Manufacturing and study the detector hybrid retail properties type CdO/ P - Si the doping ,If film were prepared the Cadmium Oxide (CdO), by the way chemical spraying with tempratuer the constant base (380oC) And molar concentrations (0.1, 0.15,0.2,0.25)M. It was the doping for two element Copper and Aluminum with percentages (0.5%, 1%, 3%, 5%) on the glass and the slides of Silicon crystallization single from p - type With crystalline directional (100) and Electrical resistivity (2 - 20 Ω .cm) and from N - type With crystalline directional (100) and Electrical resistivity (10 Ω .cm) at thickness between (400 - 600 nm).We study the Characteristics Synthetic and Optical and Electrical the film CdO , by change molar concentrations with tempratuer the constant base (Ts) , I have explained the results X - ray diffraction that film CdO With a cubic crystalline structure And that the highest intensity was at the level of (111), The results showed of optical that value Energy gap the large dependent on molar concentrations , It was found the value Energy gap they were between (2.34 ev - 2.61 ev) and It was found simpel change in Energy gap when the doping by Copper they were between (2.31 ev - 2,51 ev) and Improving Energy gap when the doping by Alminum they were between (2.48 ev - 2.62 ev).The results measure Current - Potential the optical detector there Ideality factor the detector Prepared with tempratuer the constant base and different molar concentrations where the value increases with molar concentrations decreases, and the better value they were limited 1.7 when concentration 0.5% for Impurities Copper , And limited 1.8 for Impurities Alminum when concentration 0.5%.The result measure Responsive spectral the detector Manufacture the work with in Spectral region (400 - 850 nm) , And found two value the detector (CdO/ Si) the doping and undoping , The first located when wevelength (550 nm ), which return to the detector CdO , The second when wevelength (800 nm ), which return to the detector Silicon. It was found the value Specifc Detectvity the showed the better value they were the detector CdO : Al/ Si the doping concentration 5% it was about 6*1011(HZ1/2.W - 1.cm) at the Wavelength (500nm) and 7*1011(HZ1/2.W - 1.cm) at the Wavelength (700nm).I have explained the results Responsive spectral for white light that the detector has liner properties and this properties improving after at dopend.

الخصائص الفيزيائية لاغشية اوكسيد الخارصين المشوبة تشويبا مشتركا بالبورون والالمنيوم == Physical Properties of Aluminum and Boron co - doped Zinc Oxide Thin Films

اسم المؤلف: رشيد هاشم جبار
اسم المشرف: انوار حسين علي الفؤادي
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا البحث تم تحضير اغشية اوكسيد الخارصين النقي ZnO والمشوبة تشويبا مشتركا بالبورون والالمنيوم ( AZB) بنسب تشويب (2, 4, 6, 8 %)، اي [ZnO : (B 1%+Al 1%), ZnO : (B 2%+ Al 2%), ZnO : (B 3%,Al 3%), ZnO : (B 4%,Al4%)]. اذ تم تحضير الاغشية بطريقة التحلل الكيميائي الحراري بدرجة حرارة القاعدة مقدارها(450 ±10 oC) وسمك (150±5 nm) على قواعد زجاجية وسليكون مسامي من النوعين (n, p) بمقاومية مقدارها(0.05 - 0.1 Ω.cm) واتجاه بلوري (111). تم تصنيع مفارق هجينة من انواع : ( ((ZnO, AZB)/p - PS/Si, (ZnO, AZB)/n - PS/Si ، وتم تحضير طبقة السليكون المسامي بطريقة التنميش الكهروكيميائية والكهروكيميائي تحت تاثير ضوء الهالوجين على قواعد السليكون للنوعين (n, p) بكثافة تيار مقدارها (30 mA) وزمن مقداره (30 minutes) . تم دراسة طبوغرافية سطح الاغشية وللسليكون المسامي باستعمال المجهر الالكتروني الماسح (SEM)، مجهر نفاذية الالكترونات (TEM) ومجهر القوة الذري (AFM) فتبين ان التركيب السطحي للاغشية المرسبة هو تركيب نانوي يتناقص فيه الحجم الحبيبي مع زيادة نسب التشويب المشترك اذ بلغت قيمة اصغر حجم حبيبي 7.5 nm))، وان خشونة السطح تزداد مع زيادة التشويب المشترك وتتغير من(1.34 - 6.15 nm) ومن (6.4 - 12.12)للاغشية المرسبة على الزجاج والسليكون المسامي على التوالي، واظهر جهاز حيود الاشعة السينية (XRD ) ان اغشيية ZnO المحضرة النقية والمشوبة ذات تركيب متعدد التبلور ومن النوع السداسي المتراص (hexagonal wurtzite). تم دراسة الخصائص البصرية للاغشية المحضرة بوساطة قياس طيف النفاذية والامتصاصية عند درجة حرارة الغرفة لمدى طول موجي يتراوح من (300 - 1100 nm) تبين ان النفاذية البصرية للاغشية النقية (87 %) وانها تتناقص مع زيادة نسب التشويب، وظهر ان فجوة الطاقة البصرية تزداد بزيادة نسب التشويب حيث بلغت قيمة فجوة الطاقة البصرية للغشاء النقي (3.22 eV) وتصل الى (3.31 eV) عند التشويب بنسبة (8%). اظهرت القياسات الكهربائية ان الاغشية النقية والمشوبة من النوع السالب (n - type)، وتركيز حاملات الشحنة يزداد مع زيادة نسب التشويب المشترك. لاغشية المحضرة المرسبة على الزجاج والسليكون المسامي للنوعين (n, p) تم استخدامها في قياس التحسسية للغازين (NH3, NO2)، بدرجة حرارة الغرفة وبتراكيز (50, 100, 150, 200 ppm). اظهرت النتائج ان المقاومة الكهربائية للاغشية تتناقص مع زيادة التشويب بالنسبة للغاز (NH3) بسبب تفاعل الاختزال، لكنها تزداد مع زيادة التشويب بالنسبة للغاز (NO2) بسبب تفاعل الاكسدة. بينت النتائج ان تحسسية الاغشية المرسبة على السليكون المسامي تكون اكبر من تحسسية الاغشية المرسبة على الزجاج، وتكون تحسسية الاغشية المرسبة على السليكون المسامي نوع (n) اكبر منها في حالة السليكون المسامي لنوع (p). وبينت الدراسة ان زيادة تراكيز الغازات تؤدي الى زيادة التحسسية. | In this research, pure ZnO and (aluminum and boron) co - doped ZnO(AZB)thin films were deposited with various doping concentration(2, 4, 6 and 8 %),[ZnO : (B 1%+Al 1%), ZnO : (B 2%+ Al 2%), ZnO : (B 3%,Al 3%), ZnO : (B 4%,Al4%)]. The thin films have been prepared by Spray Pyrolysis's method at (450 ±10 oC) substrate temperature with (150±5 nm) thickness on glass and porous silicon (n & p) types with resistivity (ρ= 0.05 - 0.1 Ω.cm) and (111) crystalline orientation. Heterojunctions of the types, such as : (( ZnO, AZB)/p - PS/Si, (ZnO, AZB)/n - PS/Si were also prepared. The porous silicon layer was prepared by the electrochemical and photo electrochemical etching under the effect of halogen light on silicon substrates for (n & p) types with current density (30 mA) for (30 minutes). The surface topography of the films and the porous silicon are studied by using the Scanning Electron Microscopy (SEM), Transmission electron microscopy (TEM) and the Atomic Force Microscopy (AFM). The study shows that the surface structure of the deposited films is nano structural and the value of the grain size decreases with the increase of co - doping where the minimum value of grain size was (7.6 nm). It was found that the surface roughness increased with doping from (1.34 to 6.15 nm) and (6.4 to 12.12) for a films deposited on glass and porous silicon substrate respectively, the x - rays diffraction showed the prepared doped and undoped ZnO thin films were of polycrystalline structural of(hexagonal wurtzite). The optical properties of the prepared thin films have been studied by measured the transmittance and absorbance spectrum at room temperature for the wavelength range (300 - 1100 nm), the transmittance was (87 %) for the undoped ZnO, the transmittance decreased with the co - doped increased. The value of the optical energy gap increased with the co - doped increase, the optical energy gap of the undoped film was found to be (3.22 eV) and increased to (3.31 eV) after doping with (8%) rate. The electrical measurements proves that doped and undoped thin films were n - type, and the carrier charge concentrations increased with the increase of co - doped rate. The prepared thin films deposited on glass and porous silicon (n & p) types have been used to the sensitivity measurements for (NH3, NO2) gasses at room temperature for the (50, 100, 150, 200 ppm) concentrations. The results shows that the electrical resistance for the thin films decrease with the increase of co - doped concentrations for (NH3) gas due to the reducing interaction, but it increases with the increase of co - doped concentration for (NO2) gas due to the oxidation interaction. The results show that the sensitivity of the thin films deposited on porous silicon substrates is higher than the sensitivity of the thin films deposited on glass substrates. The sensitivity of n - type porous silicon is higher than p - type porous silicon and glass substrate. The study shows that the increase of gases concentrations leads to increase of sensitivity.

دراسة التركيب المتهيج للنوى زوجية - زوجية ذات العدد الذري Z= 50, 48, 46 في المستوى المتهيج الاول == Study of Excited Structure for Even - Even Nuclides of Z = 50, 48, 46 in The First Excited State

اسم المؤلف: رسل سعد هادي
اسم المشرف: فاطمة عبد الامير جاسم
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: درست الخواص الكهرومغناطيسية للنظائر زوجية - زوجية للنوى 48Cd , 50Sn و46Pd الغنية بالنيوترونات من خلال قوى الانتقال لرباعي القطب الكهربائي |M(E2)|2 W.u ↓ واحتمالية الانتقال المختزل B(E2)W.u ↓ لانتقال اشعة كاما من المستوى المتهيج الاول الى المستوى الارضي. حيث تم حساب قوى الانتقال لرباعي القطب الكهربائي |M(E2)|2 W.u ↓ بالاستعانة بمعدل العمر للمستوى المتهيج الاول والشدة النسبية لاشعة كاما المنبعثة من ذلك المستوى, بينما قيم احتمالية الانتقال المختزل B(E2)W.u ↓ استخرجت من خلال عمر النصف للمستوى المتهيج الاول المصحح لمعامل التحول الداخلي.وللحصول على قيمة دقيقة لانتقال رباعي القطب الكهربائي ↓ E2, تم حساب ورسم القيم المتبناة لكل من |M(E2)|2 W.u ↓ وB(E2)W.u ↓ كدالة لعدد النيوترونات.في هذا البحث, تم تحويل القيم المتبناة لانتقال ↓E2 الى قيم احتمالية الانتقال المختزل B(E2) ↑ e2b2 والتي افادتنا في دراسة تركيب النوى من حيث الاختلاف في الشكل لان عامل التشوه β تم استخراجه من B(E2) ↑ e2b2, كما ان دراسة تاثير عدد النيوترونات على سلوك كل من B(E2) ↑ e2b2 وβ في المتسلسلات الايزوتونية لنوى 48Cd , 50Sn و46Pd يعطي معلومات جيدة حول التشوه في النوى.تركزت دراستنا على ثلاث انواع مختلفة من النوى, الاول بعدد ذري سحري50 , والثاني بعدد ذري شبه سحري 48, والثالث بعدد ذري بين القشرات المغلقة 46.في نهاية العمل الحالي تم عمل مقارنة جيدة للحسابات الحالية لقيم احتمالية الانتقال المختزل B(E2) ↑ e2b2 وعامل التشوه β مع معظم القيم العملية والنظرية الحديثة. | Electromagnetic properties for even - even nuclides in neutron - rich nuclei such 50Sn, 48Cd and 46Pd have been studied through the electric quadruple transition strength |M(E2)|2 W.u ↓ and the reduced transition probability B(E2)W.u ↓for γ0 - transition from first excited state to the ground state. The electric quadruple transition strength |M(E2)|2 W.u ↓ is calculated by using life - time for excited state with the intensity of γ0 - transition, while B(E2)W.u ↓ is extracted from half - life time to state corrected for internal conversion coefficient. To obtain precise value for the transition of E2↓, the adopted value for |M(E2)|2 W.u ↓ and B(E2)W.u ↓ was calculated and plotted as a function for neutron number. In present work, the adopted values for the transition of E2↓ are converted to B(E2)exp ↑ e2b2 which helped us to study the structure for nucleus, such as the variation in shape, because the deformation parameter β is extracted from B(E2) ↑ e2b2 and the study for behavior of each of B(E2) ↑ e2b2 and β versus neutron number in isotonic chains to 50Sn, 48Cd and 46Pd gives good information about the deformation in nuclei. Our study focused on the three different types of nuclei, the first with atomic magic number 50, the second with semi - magic atomic number 48 and the third nucleus with atomic number between closed shells 46. At the end of the present work, the good comparisons for the present calculation to the values of the B(E2) ↑ e2b2 and β with most recent values of experimental and theoretical was done.

تحضير اوكسيد القصدير ذو التراكيب النانوية على اوكسيد الالمنيوم المانود بطرق مختلفه == Synthesis of SnO2 nanostructure on anodic aluminum oxide by different method

اسم المؤلف: رحمه سعد محمد العبيدي
اسم المشرف: رعد سعدون صبري
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم تحضير قالب اوكسيد الالمنيوم المانود بعملية الانودة بخطوتين للحصول على افضل ترتيب للمسامات باستخدام حامض الاوكزاليك بشروط تحضير مختلفة مثل درجة حرارة المحلول (10,7و 15 درجة سيليزية) وفولتيات الانودة (30 و40 فولت.(نتائج المجهر الالكتروني الماسح للقالب المحضرعند 30 فولت بينت ان المسامات ذات قطر صغير وترتيب ضعيف. بينما 40 فولت , المسامات ذات قطر اكبر وذات ترتيب عالي. من خلال هذه الدرجات الحرارية الثلاثة المختلفة (10,7و 15 درجة سيليزية). وجد ان (10 درجة سيليزية) هي افضل درجة حرارية لتحضير مسامات ذات ترتيب عالي. اذا درجة الحرارة ازدادت فان قطر المسام سوف يزداد . عامل الوقت مهم جدا في هذه العمليه عندما وقت الانودة يقل فان اوكسيد الالمنيوم المانود اصبح رقيق جدا وهش ويتكسر بسهوله جدا وبالتالي ستكون هناك صعوبة في استخدامه كقالب ترسيب. عندما الوقت يزداد لاكثر من 12 ساعة في الانوده الثانيه فسمك القالب يصبح حوالي 44 مايكرو متر سيعطي افضل شرط لترسيب اوكسيد القصدير. في هذا البحث اربع طرق استخدمت لتحضير اوكسيد القصدير بشكل قضبان نانوية باستخدام قالب اوكسيد الالمنيوم المانود مثل طريقة الصول - جيل ,تقنية التغطيس والفلترة ,التفريغ والتقطير وطريقة التبخير الحراري. جميع نتائج فحوصات الاشعة السينية لكل طرق التحضير تبين ان اوكسيد القصدير هو تركيب متعدد التبلور وذات تبلور متجانس. طرائق تحضير الصول - جيل والتبخير الحراري تبين ان القضبان النانوية لاوكسيد القصدير لها نفس القطر والطول وافضل ترتيب واكثر تجانس . بينما القضبان النانوية لطرائق التحضير الاخرى تختلف في القطر والطول. | Anodic aluminum oxide (AAO) was prepared by anodization process with 2 - step to obtain the best order arrangement of pores using oxalic acid at different preparation conditions such as electrolyte temperature (7, 10 and 15 °C) and anodization voltages (30 and 40 V). SEM results of the template which prepared at 30V showed the pores with small diameter and poor order. While at 40V, the pores with large diameter and high quality order pores. From three different temperatures (7, 10 and 15 °C), it's found that 10°C is the best temperature to prepare high quality order pores. If the temperature increases, the pore's diameter will increase. The time factor is very important in this process; when the anodization time decrease, AAO becomes very thin, brittle and can break very easily. Thus, there will be a difficulty to use as a deposition template. When the time increase more than 12 hr in second anodization, the template thickness's will become 44µm which gives the best condition to deposit SnO2. In this research, four methods used to prepare SnO2 nanorods by using AAO template such as the sol - gel, immerse and filtration technique, vacuum and drop setting and thermal evaporation. The whole results of XRD for all preparation methods showed that SnO2 is polycrystalline and homogeneous crystal. The sol - gel and thermal evaporation methods revealed the SnO2 nanorods have the same rod's diameter, length, best order and highly homogeneous. While the nanorods of other preparation methods are different in diameter and length.

تحضير ودراسة الخواص الكهربائية والبصرية لاغشية NiO الرقيقة غير المشوبة والمشوبة بالنحاس لتطبيقات متحسس الغاز == Preparation and study the electrical and optical properties of undoped and Cu doped NiO thin films for gas sensor applications

اسم المؤلف: رانيا رعد كاظم الكناني
اسم المشرف: انوار حسين علي الفؤادي
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في العمل الحالي، تم تحضير اغشية رقيقة جيدة باستخدام تقنية منخفضة التكلفة وهي الرش الكيميائي الحراري, تم قياس الخصائص التركيبة , البصرية والكهربائية, والتحسسية لاغشية اوكسيدالنيكل غير المشوبة والمشوبة بالنحاس عند النسب ((1%,3%,5%,7%المرسبة على قواعد زجاجية مسخنة ب درجة حرارة c o (10 ± 400) وبسمكnm ( 10± 250 ) ، من حيود الاشعة السينية وجد ان جميع الاغشية النقية والمشوبة لها تركيب مكعبي , وبصورة عامة هناك زاويتي حيود عند المدى الزاويo 30 - 60)) تعود للسطحين (111)و(200) . وجد ان الحجم الحبيبي يزداد مع زيادة نسب التشويب حتى نسبة 3% ثم تنخفض قيمته عند النسب 5%, 7% ,ومن خلال قياسات ماسح القوة الذرية AFM وقياسات المجهرالالكتروني الماسح SEM تم التعرف على تاثير التشويب على جميع خواص الاغشية, كما تبين من نتائج التشويب ان زيادة التشويب تؤدي الى االزيادة في الحجم الحبيبي عند النسب (1%و3%) ثم ينخفض عند النسب (5% و7%). اشتملت الرسالة دراسة الخواص البصرية لاغشية اوكسيد النيكل غير المشوبة والمشوبة بالنحاس , وتبين ان فجوة الطاقة تقل من3.8 - 2.8) ev ) بزيادة نسبة التشويب. وجد ان الاغشية لها معامل امتصاص عالي cm(α>10 ) الذي يؤدي الى زيادة احتمال حدوث الانتقالات المباشرة بين المستويات البلورية وبينت النتائج ان معامل الامتصاص يزداد مع زيادة نسب التشويب. وقد اظهرت نتائج الخواص الكهربائية (D.C) زيادة التوصيلية الكهربائية مع زيادة التشويب لتصل اعلى قيمة لها عند نسبة 7%. وقد وجد ان لجميع الاغشية طاقات تنشيط تقل مع زيادة نسبة التشويب. من قياس تاثير هول وجد ان تحركية حاملات الشحنة تقل وتركيز الحاملات تزداد مع زيادة نسب التشويب . اما خصائص التحسسية لجميع الاغشية المحضرة تم قياسها للابخرة (NH ,H O )عند تراكيز مختلفة ppm(100,200,300) عند درجة حرارة ,150° c واظهرت النتائج ان افضل تحسسية كانت عند نسبة تشويب 5% لبخار NH , وقد وجد ان هناك زيادة خطية للتحساسية مع زيادة تركيز البخار. وهذا بسبب زيادة كمية البخار الذي يتفاعل مع سطح الغشاء الرقيق. | In the present work, a good adherent and smooth films of undoped and copper doped NiO have been prepared by using low cost spray pyrolysis technique at different percentage of copper concentration ,structural, optical, electrical, and sensing properties have been studied at different concentrations of Cu (1% ,3%,5%,7% ) deposited on glass substrate at temperature (400±10) oc with (250±10)nm thickness . From the X - ray diffraction investigation, the crystalline structure of thin films was a polycrystalline with a cubic structure , generally the peaks of the NiO and NiO : Cu thin films were observed at diffraction angles at the range (37°and 43°). All NiO : Cu thin films display peaks of (111), (200) and Cu peaks do not appear even after adding a higher quantity of Cu into the NiO films, the angle position of peak (111) shifted toward lower value with doping in Cu at 1%,3% then start to increases at 5%,7% concentration,resulting in the increasing of lattice constant (a),interplaner spacing (d) and crystallite size (D),then decreases due to the degradation in the crystallinity of NiO doped with 5%,7% respectively,surface analysis by SEM and AFM have been used to understand the effect of the doping on morphology properties of the samples. The doping resulted in increasing grain at doping rates (1%,3%), then decreases at doing rates (5%,7%). The measurements of optical properties of undoped and copper doped NiO films decreased with increasing the doping rate.Also the results have showed that absorption cofficient increases with doping to reach maximum value at 7% concentration .The energy gap of was calculated for undoped and copper doped NiO films,it is noticed that the energy gap decreases with the increases of doping until it reaches the minimum value at 7% doping concentration .The D.C measurements show that the resistivity decreased with increasing doping rate,also the hall measurements have been showed the carrier concentration increased with increasing doping rate. The AFM results reveal that the grain size increases with the increase in copper concentration at rates (1%,3%) and then decreased at rates (5%,7%).The sensing measurements showed that undoped and copper doped NiO thin films have high sensitivity to NH vapor as compared to H O vapor , and the best result was 26% at doping rate 5% at 300ppm vaopr concentration ,at operation temperature 150 o c for NH vapo

دراسة طيفية لبعض الجزيئات ثلاثية الذرات باستخدام الطرق شبه التجريبية == Spectroscopic study of some tri atomic molecules using semi - empirical methodes

اسم المؤلف: ذكرى كمال طه
اسم المشرف: زياد عدنان صالح
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تــم في هــذا البحث دراسـة الخـواص الطيفيه كجهد التاين , الالفه الالكترونيه وقيم الطاقه للمدارات الجزيئيه المشغوله بالالكترونات (EHOMO)، والفارغة من الالكترونات (ELUMO) وفجوة الطاقة وكذلك حساب الكهروسالبيه والصلاده الكيميائيه والنعومه (قابلية التفاعل). لبعض الجزيئات ثــلاثيـة الـــذرات نظـــريا , اذ ان الجزء النظري تمت دراسته من خلال استخدام برنامج كاوسين (Gaussian09 لبعض الجزيئات الثلاثية الذرات كجزيئة ثاني اوكسيد الكربون , الماء , الاوزون , هيدروكسيد الصوديوم , كبريتيد الهيدروجين وكلوريد المغنسيوم وذلك باستخدام برامج الكم شبه التجريبية التي تستغرق مدة زمنية للحسابات (PM3,PM6) قياسا الى الطرائق المتقدمه التي استخدمت في البحث هي طريقتا دوال الكثافة وهارتري فوك ( HF, DFT ) وباستخدام عناصر مجاميع اساس مختلفه . تم رسم الشكل الهندسي الفراغي الاكثر استقرارا اعتمادا على المحاور الداخلية (˚r,θ˚,Φ)f ومنها تم حساب اطوال الاواصر والزوايا المحصورة بينها وعزمي القصور الذاتي وثنائي القطب , ثوابت الدوران , الكتله المختزله , طاقة نقطة الصفر والاستقطابيه وطاقات المستويات الاهتزازية المنشطرة نتيجه لتاثير رينر - تيلر , ومضاعف - - ℓ وحساب الانتقالات بين المستويات الاهتزازيه كذلك حساب الطاقه الكليه للجزيئات كافه. كذلك تم حساب ترددات انماط الاهتزاز الاساسية للجزيئه ورسمها ضمن منطقة الاشعة تحت الحمراء من الطيف الكهرومغناطيسي . اذ توصلت الحسابات النظرية ان قيم مضاعف - ℓ - تزداد كلما انتقلت الجزيئات الى مستويات طاقة اعلى واما بالنسبة لحسابات تاثير رينر - تيلر وجد انها تسبب في انشطار مستويات الطاقة الاهتزازية بالنسبة لكل الجزيئات في المستويين الاهتزازيين (1,0,1) و(2,2,0) لهما مقدار الطاقة نفسه . اضافة الى جانب وجود مستويات طاقة اخرى منشطرة متقاربة في قيم طاقاتها . | The study of spectral properties such as ionizations potential, electron affinity, electronegative, chemical hardness, softness and electrophonic index from inharmonic potential energy curve, spectroscopic dissociation also calculated EHOMO, ELUMO and energy gap Eg by theoretical parts .this studies by using Gaussian 09 (Gaussian 09 Revisioon - A - 02 - SMP) program of some tri - atomic molecules such as (CO2, H2O ,O3 NaOH ,H2S , MgCl2 molecules ) using semi empirical quantum programs , By using semi - empirical (PM3,PM6) , density functional theory and Hartree - Fock (DFT ,HF) methods this by using different basis sets So after drawing structure optimization of molecules depending on the internal coordinate f(r,θo,φo), then calculate length of bonds and angles between it , moment of inertia, dipole moment for Molecules by quantum mechanics methods which, then we calculated the orbital energy values (EHOMO ) and (ELUMO) ; and from these values ; ionization energy was calculated for molecule by take absolute values to (EHOMO )A computational calculation is a valuable tool for estimating the (geometry, total energy, electronic properties, dipole moment, polarizability, electrostatic surface potential, vibration frequencies) of molecular structures. The IR spectrum of molecule primitive vibration frequency located within infrared region from spectrum ranged is obtained Then - ℓ - type doubling we conclude that values increasing with it exited to high levels , from Renner - Teller effect cause splitting of energy of or vibrational state (1,0,1) , (2,2,0) have the same energy

تقدير الحاصل النيتروني لبعض نوى النظائر المتوسطة نتيجة لتفاعلات البروتون وجسيمات الفا والنيوترون لمدى طاقة (E=10 - 50) MeV

اسم المؤلف: رافت عبد الحسن مسلم
اسم المشرف: خالد هادي مهدي العبيدي
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: للنظائر اهمية كبيرة في كثير من المجالات مثل المجالات البحثية والصناعية والطبية ومجالات اخرى. فبعضها يحتاج لنظائر بنصف عمر طويل او بنصف عمر قصير وحاصل نيتروني عالي او قليل للحالتين, لذا تضمن هذا العمل دراسة الخصائص النووية لتسعة عناصر متوسطة الاعداد الكتلية هي (Ca ,Sc ,Ti ,Ni ,Cu ,Zn ,Zr ,Nb ,Mo ), ولكل عنصر تم اختيار عشرة نظائر لذا تضمنت الدراسة 90 نظير اعدادها الكتلية بين (41 الى 96) , شملت هذه الدراسة حساب طاقة التفاعل, طاقة العتبة, الكتلة المختزلة, طاقة فصل النيوترون وطاقة الربط النووية لتفاعلات ,Ca(α,n)Ti Ni(α,n)Zn , Zr(α,n)Mo , ,Sc(p,n)Ti ,Cu(p,n)Zn Nb(p,n)Mo , ,Ti(n,n)Ti Mo(n,n)Mo ,Zn(n,n)Zn لنظائر العناصر اعلاه , كما تم حساب قدرة الايقاف باستعمال برنامج (SRIM 2013) ومن ثم حساب الحاصل النيتروني من المعادلات النظرية اعتمادا على احدث ما نشر من المقاطع العرضية للعامين (2010 ,2012 ), كما تم في هذه الدراسة استخراج مجموعة من المعادلات شبه التجريبية الموحدة لحساب المحصول النيتروني لهذه العناصر بشكل مباشر لنوعين من التفاعلات (α,n) و(p,n) والتي كل منها يشتمل على عشرة نظائر ليكون المجموع 60 تفاعل, نتائج الحاصل النيوتروني المحسوبة من هذه المعادلات اعطت توافقا جيدا مع القيم النظرية التي حسبت من المعادلات النظرية. هذه المعادلات مع ثوابتها وضعت ضمن برنامج ماتلاب صمم لهذا الغرض وبالاعتماد على نوع العنصر ونوع التفاعل وطاقة الجسيم الساقط لايجاد الحاصل النيتروني لاي نظير عدده الكتلي بين (40 - 100 ) لمدى طاقة يتراوح بين (15 - 50) مليون الكترون فولط. يمكن تطوير البرنامج ليشمل عدد اكبر من العناصر بنظائرها ولمديات طاقة اوسع. | Isotopes have a great importance in many fields such as research, industrial, medical and other. Some of them need isotopes with long half life or short half - life with high neutron yield or less for them. So this work included the study of the nuclear properties for nine medium elements (Ca, Sc, Ti, Ni, Cu, Zn, Zr, Nb and Mo), from each element we choose 10 isotopes, so the total are 90, their masses numbers were between (41 to 96), this study included the calculations of the Q - value reaction, threshold energy, reduced mass, separation energy of neutron and the binding energy for nuclear reactions , Ca(α,n)Ti , Ni(α,n)Zn , Zr(α,n)Mo , Sc(p,n)Ti , Cu(p,n)Zn , Nb(p,n)Mo , Ti(n,n)Ti Mo(n,n)Mo and Zn(n,n)Zn for the isotopes of the above elements, also we calculated the stopping power by using a (SRIM 2013), then the neutron yield was calculated from theoretical equations depending on most recent cross - sections (2010.2012), as well as this study focused on the extraction of a set of uniform empirical equations to calculate the neutron yield in directly for (α, n) and (p, n) reactions for these elements, and each of them includes 10 isotopes so the total reactions are 60. The result of neutron yield for these equations was in a good agreement with theoretical value which is calculated from the theoretical equations. These set equations with their coefficients were put within the MATLAB program, it was designed for this purpose and by depending on the element type, the type of reaction and incident particle energy to find the neutron yield for any isotope, their mass number is between (40 - 100) for energy range within the (15 - 50) MeV. This program can be developed to include a greater number of elements with their isotopes and for larger energy range.

دراسة تاثيرات خسارة الانحناءات لليف البصري في منظومة الاتصالات البصرية == Study Effects of Optical Fiber Bending Loss in Optical Communication System

اسم المؤلف: دعاء هشام محمد
اسم المشرف: سمر يونس الدباغ
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا البحث , تم دراسة تاثير الانحناء على انتقال الاشارة الضوئية خلال الالياف البصرية. هذا العمل يتضمن قياسات الخسارة في القدرة خلال الليف البصري بوجود الانحناءات عند عدد لفات مختلفة من (1 - 10) لفة وعند اقطار انحناء مختلفة (12.5 , 10.5 , 8 , 6 , 4 , 3 , 2 , 1) cm. نوعين من الالياف البصرية تم استخدامها , الليف المتعدد الانماط (MMF ) باطوال مختلفة (1 , 20 , 40 , 100 , 120 , 140 ) m وليف احادي النمط بطول (4.5 m) .واستخدم نوعين من الليزرات ليزر دايود الاحمر (λ=650 nm) وليزر دايود اخضر (λ=532 nm).القدرة الضوئية تم قياسها باستخدام جهاز قياس القدرة. تشير النتائج ان كلما قل قطر الانحناء وزادت عدد اللفات فان الخسارة في القدرة الضوئية تزداد. حيث ان القدرة الضوئية لليزر الاخضر عند الطول الموجي (λ=532 nm) تقل من (48.083*10 - 4) mW الى (41.114*10 - 4) mW عند اللفة الاولى لليف متعدد الانماط بطول (40m) عندما تم حني الليف من cm12.5 الىcm 1. اما لليف الاحادي النمط, فان القدرة الخارجة لليزر الاخضر عند طول موجي (λ=532 nm) تقل من (13.608) mW الى (13.32) mW عند اللفة الاولى من طول (4.5) m لليف احادي النمط عندما تم حني الليف من 12.5 cm الى 3 cm . اظهرت النتائج ايضا ان تاثير الانحناء في القدرة الخارجة في حالة الليف المتعدد الانماط اكبر مقارنة بالليف احادي النمط. وكذلك النتائج لهذا البحث تتضمن تصميم وتنفيذ منظومة اتصال الالياف البصرية لفحص تاثير الانحناء على الاشارات المنتقلة خلال الالياف البصرية متعددة الانماط حيث لف من (1 - 10) لفة وعند اقطار انحناء مختلفة ( 1,2,3,4 ) cm . تم تضمين الاشارات باستخدام ليزر nm 532 .الاشارة تم ارسالها خلال ليف متعدد الانماط باطوال مختلفة وهذه الاشارة تم الكشف عنها باستخدام كاشف السليكون الضوئي (AEPX 65) . وجد ان الانحناءات تؤدي الى تغييرات واضحة في سعة ( جهد ) الاشارة الخارجه ؛ حيث يقل الجهد من 0.64volt الى 0.52 volt عند زيادة عدد اللفات من) 1 - (10 لفة في ليف بطول 40m وقطر الانحناء (1) cm.ويقل الجهد الى حد 0.2 volt في ليف بطول 140m وقطر الانحناء (1) cm.واخيرا الاشارات المنتقلة فيمنظومة الياف بصرية باستخدام كاميرا (CCD) واستخدام حاسبة شخصية معUSB TV STICK لرؤية تاثير الانحناء على انتقال الاشارات خلال الالياف البصرية. حيث ان الاشارة الخارجة ستقل من 0.68 volt الى 0.6 volt عندما عدد اللفات تزداد من (1 - 5) لفة في ليف بطول (1) m .اجرى احتساب كل من نسبة الاشارة الى الضوضاء ومعدل الخطا في نقل البيانات في للاشارات المنتقلة في منظومة الاتصالات عند اقصى طول لليف البصري 140m وعند اللفة 10 فكانت 115.147dB و3.68x10 - 27 على التوالي . بينما نسبة الاشارة الى الضوضاءSNR ومعدل الخطاBER في نقل البيانات في الاشارات المنتقلة باستخدام كاميرا CCD عند طول الليف البصري 1m وعند اللفة 10 فكانت 100.49dB و5.98x1o - 24 على التوالي .. اظهرت النتائج ايضا ان نسبة الاشارة الى الضوضاء تقل ومعدل الخطا في نقل البيانات يزداد بزيادة عدد اللفات في كلا المنظومتين | In this work, bending loss effects of optical fiber on the transmitted signal were studied.This work includes measurements of the power loss through optical fiber with the presence of bends at different wrapping turns (1 - 10) turns and at various bending diameters (12.5, 10.5, 8, 6, 4, 3, 2, and 1) cm. Two types of optical fibers were used, multimode optical fiber (MMF) of different lengths (1, 20, 40, 100, 120, 140) m and a single mode optical fiber (SMF) of length (4.5 m). Two optical sources were used, Red laser diode (λ=650 nm) and green laser diode (λ=532 nm). The output power was measured using an optical power meter. Results indicated that as the bending diameter decreased and the number of wrapping turns increased, the power loss increased. The output power of green laser diode at (λ=532 nm) decreased from (48.083*10 - 4) mW to (41.114*10 - 4) mW at the first turn of 40m MM fiber length when bent from (12.5 to 1) cm. For SMF, the output power of green laser diode at (λ=532 nm) decreased from (13.608) mW to (13.32) mW at first turn of (4.5) m SM fiber length when bent from (12.5 to 3) cm. The higher alteration output power in the case of multimode fiber has been deduced as compared with that of the single mode fiber. Also the results of the project involves a design and an implementation optical fiber communication system to investigate the effect of bending on the transmitted signals through multimode optical fiber wrapped (1 - 10) turns and at different diameters (1, 2, 3, 4) cm . Signals were modulated using 532nm laser diode then sent through multimode fiber of different lengths and detected by silicon photo detector (AEPX 65). The bending induces changes in the amplitude (voltage) of the output signal, the output voltage decreased from 0.64 volt to 0.52 volt when the no. of turns increased from 1 - 10 turns for 40 m optical fiber at a bending diameter of (1cm) and decreased to 0.2 volt for 140m multimode fiber at a bending diameter of (1cm).Finally, a transmitted signal in optical communication system has been built using CCD camera and Pc with USB TV STICK for monitory the effect of bending on signals that transmitted through optical fibers. The output transmitted signals decreased from 0.68 volt to 0.6 volt when the no. of turns increased from 1 - 5 turns for 1 m optical fiber. The calculations of signal to noise ratio (SNR) and Bit Error Rate (BER) for transmitted signals in optical communication system at maximum fiber length of 140m and 10turns are equal to 115.147dB and 3.68x10 - 27 respectively. While for transmitted signal form CCD camera at fiber length 1m and of 10 turns are equal to 100.49dB and 5.98x1o - 24 respectively.Results show that SNR decreased and BER increased as no. of wrapping turns increased for both systems.

محاكات الهوائي الكسوري باستخدام منحني كوج ومينكوسكي == Simulation of Fractal Antenna Using Koch and Minkowiski Curves

اسم المؤلف: خضير عباس قنبر
اسم المشرف: كاظم جواد كاظم الشجيري
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: الهوائي عنصر رئيسي في الاتصالات اللاسلكية فهو الادات التي تستقبل وترسل الموجات الكهرومغناطيسية في الفضاء الحر. ان التوسع الهائل في الاتصالات اللاسلكية بحاجة الى هوائيات متعددة الحزم وصغيرة الحجم وبمقطع جانبي منخفض ومن اجل تطوير اداء الهوائيات استخدمت الهندسة الكسورية لتحسين خواصها . والتي تجعل الهوائي متعدد الوظائف . في هذة الرسالة استخدمت تقنية جديدة لتحسين اداء الهوائيات الكسورية ثنائية القطب باستخدام عاكس كسوري متحرك. استخدمت الحقيبة البرمجية 4NEC2 لمحاكاة اول ثلاث تكرارت لهوائيات منحني Koch ومنحني Minkowski قبل وبعد اضافة العاكس الكسوري . ومن اجل تصميم الهوئيات بدقة عالية استخدم البرنامج Adobe illustrator CS4 لرسم جميع الهوائيات المقترحة . ومن نتائج المحاكاة لوحظ ولجميع الهوائيات ان العاكس الكسوري المتحرك حسن من قيمة VSWR (نسبة فولتية الموجة الواقفة) والكسب والتوجية وكذلك زاد الترددات الرنينية المفيدة للتكرارات الثلاثة لمنحني Koch . حيث اضاف تردد رنيني مفيد للتكرار الاول وترددين رنينيين مفيدين للتكرار الثاني وتردد رنيني للتكرار الثالث كذلك اضاف ترددين رنينيين مفيدين للتكرار الثالث لمنحني Minkowski . | Antenna is the main element in wireless communication. It is the instrument which receives and transmits the electromagnetic wave in a free space. The great expand in wireless communications need antennas with multiband, small size and low profile. In order to develop the performance of antennas, fractal geometry is used to optimize the property of the antenna. It makes antenna multi - functional. In this thesis a novel technique is used to optimize the performance of fractal dipole antennas by using a movable fractal reflector. 4NEC2 software package is used to simulate the first three iterations for (Koch curve and Minkowiski curve) antennas before and after adding the fractal reflector. In order to design fractal antennas with high accuracy, Adobe illustrator CS4 software program is used to draw all proposed antennas. From simulation results and for all proposed antennas are observed the movable fractal reflector optimize the value of voltage standing wave ratio VSWR, gain and directivity. Also, it increases the benefit resonant operating frequencies for all three iterations of the Koch curve. It adds one benefit resonant frequency to the first iteration and two benefit resonant frequencies to the second iteration and one benefit resonant frequency to the third iteration. Also, it adds two benefit resonant frequencies to the third iteration of Minkowiski curve

قياس تراكيز غاز الرادون ووليداته وتقييم التعرض في ابنية كلية العلوم في الجامعة المستنصرية == Measurement of Radon and Daughters Concentrations and Exposure Assessment in the Buildings of the Science College at AL - Mustansiriyah University

اسم المؤلف: حيدر عيد فاضل
اسم المشرف: ايمان طارق العلوي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The concentrations of Radon gas and their progeny have been measured in the building of Al - Mustansiriyah University College of Science. Deanship building, four flowers, includes dean office and administrative staff in addition to the department of mathematics, department of biology, lecture rooms and laboratories affiliated in addition to the basement of the Deanship building, building of department of chemistry libraries, building of department of physics libraries, and building of meteorology or atmospheric Science (in which the detectors have been suspended, but most of them had been lost because of the maintenance work, which cooperated with the preparation of this study).The nuclear track detector of solid state CR - 39 technique has been used to study the trace effect. 356 detectors have been suspended and distributed (two detectors) in each location under study. Detectors with 1cm x1cm area have been suspended with two heights; the first height represents the sit down mode and the second represents the standing mode, for a period of 90 days except those for the department of chemical libraries because of an official holiday in the Al - Mustansiriyah University.The dosimeters have been design to be adequate for the research environment. The samples are collecting after exposing time for the period mentioned above, then applying the chemical etching and Statistics numerical process the density of the nuclear has been calculated in order to calculate the concentrations of Radon and their daughters. The calibration process has been made in this work by exposing other detectors (similar of that used for the detecting) to Radium - 226 source with known activity radiation.It was found that all concentrations are within the world wide limits. It has been found the Radon concentrations in the basement of Deanship building are relatively higher than in other location have been observed. These concentrations are decreasing gradually with height to reach the lowest value at the fourth floor. It strengthens that the Radon gas is heavier than air. The yearly effective dose of the exposure to Radon has been calculated. The Radon concentration is within the world wide permissible limits.

تحضير ودراسة سلوكيات الرص لمتراكبات (الومينا - المنيوم) == Preparation & Studying the Compaction Behaviors of the (Alumina - Aluminum) Composite

اسم المؤلف: حنان جميل مصطفى
اسم المشرف: عبد الحميد رحيم مهدي الصراف
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم تحضير المتراكب السيرميتي (سيراميك - معدن) من مادة الالومينا (Al2O3 - γ( كمادة اساس، ومن معدن الالمنيوم (Al) كمادة تدعيم، لتراكيز مختلفة من الالمنيوم (0 - 50)%، ونسبة زيادة التدعيم 10)%).تمت عملية التشكيل باستعمال الضغط باتجاه واحد، وانجزت عملية التلبيد في جو مفرغ من الهواء. درست سلوكيات الرص بحالة التلبيد الصلبة عند درجات حرارة التلبيد (400، 450، 550) م° ، وازمان التلبيد (2، 4، 6) ساعات، وعند ضغوط تشكيل (50، 100، 150) بار، تم الحصول على افضل الخواص الفيزيائية عند (550م°، 2ساعات، 150ساعة). تمت دراسة حالة تلبيد الطور السائل كدالة لتغير نسبة الالمنيوم في المتراكب عند (800م°، 2ساعة، 150بار)، بناء على ما تم التوصل اليه من خواص فيزيائية جيدة عند حالة التلبيد بالطور السائل، اختيرت هذه المواصفات لدراسة تاثير تغير الضغط عند (50، 100، 150) بار على الخواص الفيزيائية للمتراكبات السيرميتية المحضرة. اظهرت السلوكية عند المنطقة التي تحتوي تركيز الالمنيوم (40 - 50)% افضل الخصائص الفيزيائية، تبعا لذلك، درست اغلب القياسات على التركيز صاحب نسبة 50% من مادة الالمنيوم. المفهوم الاساسي الذي تضمنته هذه الدراسة هو التلاصق الفيزيائي بين مكونات المتراكب السيرميتي المحضر، والذي كان واضح من فحص انحراف الاشعة السينية. كذلك من الفحص المجهري (SEM) نلاحظ ان المتراكب النهائي (السيرميتي) المحضر اشبه الى ما يكون جزر موصلة (مادة الالمنيوم) مفصولة بمناطق عازلة (مادة الالومينا) وهذا ناتج بفعل التلاصق الفيزيائي. لوحظ ان زيادة نسبة الالمنيوم للمتراكبات المحضرة يلعب دورا مهما في الخواص الفيزيائية والكهربائية والتي تم مناقشتها بالتفصيل، وكذلك حسن من قيمة الصلادة للمتراكبات المحضرة، حيث ان التوزيع العشوائي لدقائق الالمنيوم ضمن مادة الالومينا، كون اقرب الى ما يكون الى شبكة داخلية معدنية زادت من متانة المتراكب المحضر من خلال ملء المسامات الموجودة غالبا بسبب مادة الالومينا الهشة. من خلال هذه الدراسة توصلنا الى ان المتراكب المحضر له نسبة مسامية عالية والتي يمكن توظيفها في صناعة فلترات الوقود. كما يمكن توظيف الخواص العزلية المحسنة التي توصلنا اليها في صناعة المتسعات السيرميتية (cermet capacitors )، كذلك من خواص مقاومة البلى التي توصلنا اليها، ممكن توظيفها في تصنيع ادوات القطع والبرد بعد اجراء التحسينات اللازمة. | A cermet (ceramic - metal) composite have been prepared from alumina ceramic (γ - Al2O3) as a matrix and from aluminum metal (Al) as reinforcement, prepared for different concentrations of aluminum (0 - 50)%, the reinforcing increment is (10%).The forming process was done by single action pressing, and the sintering process was done in vacuum atmosphere.The compaction behaviors of prepared cermet bodies were studied in solid state sintering, at sintering temperatures (400, 450, 550) °C, sintering times (2, 4, 6) hrs. and forming pressures (50, 100, 150) bar, the best physical properties were gained at (550 °C, 2hrs., 150bar).Liquid phase sintering process was studied as a function of Al percent in the composite at (800 °C, 2 hrs., 150 bar). According to the interesting physical properties we gained from liquid phase sintering process, these parameters were chosen to study the effect of the forming pressure ((50, 100, 150) bar) on the physical properties of the prepared cermet bodies. The behavior at the region that have aluminum concentration (40 - 50)% showed the best physical properties, according to this, most of the measurements were studied on the concentration of 50% of aluminum material. The basic concept of this study is the physical adhesion between the material particles of the prepared cermet bodies, which was obvious from the XRD tests. Also from the SEM micrograph we have notice the final structure of the prepared cermet, which is more like conducting islands (aluminum) separated by isolated areas (alumina), which is a sequent of the physical adhesion action.Increasing of aluminum content in the composite materials prepared may play an important role in physical and electrical properties has been discussed in detail, also enhanced the hardness of the samples, where the random distribution of aluminum particles through the alumina material, makes more like internal web of metal, that helps to increase toughness of samples by filling the porosities existed because of the brittle alumina.From this study we noticed, we have relative high porosity that could be employed in fuel filters. Also we have fine dielectric properties that could inter the application of cermet capacitors. Also, we have reasonable wear result that can be employed in grinding and cutting tools after improvements have been done.

الخصائص الكهربائية والبصرية لمتراكبات بوليمر - نحاس == Electrical and Optical Properties of Polymers - Cu Composites

اسم المؤلف: حسنين عبد الحسين جاسم الغالبي
اسم المشرف: اسرار عبد المنعم سعيد
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الدراسة، تم تحضير نوعين من المتراكبات (Cu - PMMA)و(Cu - Epoxy) باستخدام طريقة الصب مع نسب وزنية مختلفة من جسيمات النحاس(Cu). وقد تم تشخيص النماذج للمتراكبات بطرق مختلفة مثل صور المجهر الضوئي وصور المجهر الالكتروني الماسح (SEM) والتحليل الطيفي للاشعة تحت الحمراء (FTIR) وحيود الاشعة السينية(XRD). وتمت دراسة الخصائص الكهربائية المستمرة والمتناوبة (C.D وC.A) للمتراكبات والخصائص البصرية ضمن اطوال موجية تتراوح بين (200 - 1100) نانومتر. صور المجهر الضوئي توضح توزيع جسيمات النحاس لنماذج المتراكبات (Cu - PMMA) وتبين تكون شبكه مستمرة داخل البوليمر عند النسبة الوزنية ( %.wt 60) من النحاس, بينما نماذج المتراكبات (Cu - Epoxy) لم نستطع الحصول على اي صورة لها لان هذه النماذج سميكة ومعتمة. وقد تم دراسة مورفولوجية السطح للنماذج باستخدام تقنية المجهر الالكتروني الماسح (SEM), والذي اظهر توزيع المضاف على السطح وزيادة خشونة السطح مع زيادة نسبة النحاس. وقد تم فحص طيف (FTIR) للنماذج واظهر انواع الاواصر لكل من البولمر والمتراكبات, واظهرت هذه الدراسة ان اضافة (النحاس) لم تؤثر على التركيب الكيميائي للبولمر. واظهرت النتائج التجريبية (XRD) تحويل النماذج من شبة بلورية الى بلورية بسبب زيادة نسبة جسيمات (النحاس). وقد اظهرت النتائج الكهربائية المستمرة (D.C) ان التوصيلية الكهربائية المستمرة (σD.C) للنماذج ذات النسب الوزنية الواطئة تزداد بزيادة درجة الحرارة, اي المقاومة الكهربائية لهذه النماذج تكون ذات معامل حراري سالب, وعند النسبة الوزنية ((%.wt 60) للمتراكبات (Cu - PMMA) و(%.wt 25,30, 40) للمتراكبات (Cu - Epoxy) تقل توصيليتها الكهربائية المستمرة (σD.C) بزيادة درجة الحرارة, اي المقاومة الكهربائية لهذه النماذج تكون ذات معامل حراري موجب. وان طاقة التنشيط تقل مع زيادة النسبة الوزنية للنحاس. اما في ما يتعلق بالخواص الكهربائية المتناوبة (C.A) فان ثابت العزل(ԑˈ) والفقدان العزلي (ԑ") للنماذج تتناقص مع زيادة تردد المجال الكهربائي المسلط وانها تزداد مع زيادة تركيز جسيمات (النحاس), وتزداد التوصيلية الكهربائية المتناوبة (σ_(A.C)) مع زيادة تركيز جسيمات (النحاس) والتردد، وثابتة تقريبا في الترددات العالية. اظهرت نتائج الخصائص البصرية للمتراكبات (Cu - PMMA) ان الامتصاصية ومعامل الامتصاص ومعامل الخمود ازدادت وان فجوة الطاقة للانتقال غير المباشر المسموح تناقصت مع زيادة النسبة الوزنية للنحاس. بينما الثوابت البصرية الاخرى لم نستطيع الحصول على نتائج لهذه المعاملات لان الامتصاصية عالية جدا. اما المتراكبات (Cu - Epoxy) لم نستطيع الحصول على اي خصائص بصرية لها لان هذه النماذج سميكة ومعتمة | In this study, two types of composites have been prepared : (PMMA - Cu) and (Epoxy - Cu) by using casting methods with different weight percentages of copper particles (Cu). The composites samples have been diagnosed by different methods such as optical microscope images, scanning electron microscope images (SEM), Fourier transformation infrared (FTIR) spectroscopy and X - ray diffraction (XRD). The electrical properties (D.C and A.C) of composites and optical properties of wavelengths range (200 - 1100) nm were studied. The images of optical microscope shows distribution of copper particles for (PMMA - Cu) composites samples and shows a continuous network inside the polymer at the ratio (60wt.%) of )Cu), while the (Epoxy - Cu) composites samples we cannot get any images because these samples are thick and dark. The morphology of samples have been studied using (SEM) technique, which showed grain distribution at surface morphology and grain aggregates with increasing of copper particles. The FTIR spectrum of samples were measured and shown the type of bond for polymer and composites. This study showed that the addition of (Cu) did not affect on the chemical structure of polymer. The experimental results (XRD) showed the samples transmutation from semicrystalline to crystalline because increased ratio particles of (Cu). The results show that the (D.C) electrical conductivity increases with increasing the temperature at low concentrations, where electrical resistance for these samples have a negative thermal coefficient, at (60 wt.%) of (PMMA - Cu) and (25,30,40 wt.%) of (Epoxy - Cu) composites (D.C) electrical conductivity decreases with increasing temperature, where electrical resistance for these samples have positive thermal coefficient. The activation energy decreases with increasing weight percentage of (Cu). The (A.C) electrical properties shows that the dielectric constant (ԑˈ) and dielectric loss (ԑ") of the samples decreased with increasing the frequency of applied electrical field and they increase with the increase of the concentration of (Cu). The A.C electrical conductivity (σ_(A.C)) increases with increasing the concentration of (Cu), increases with the increase frequency, and almost constant at high frequency. The results of optical measurements of the (PMMA - Cu) composites show that the absorbance, absorption coefficient and extinction coefficient increase and the energy gap of the indirect allowed transition decreases with the increasing weight percentage of (Cu), while the other optical constants we cannot get the results for these parameters because the absorbance is very high. The (Epoxy - Cu) composites we cannot get any optical properties because of these samples are thick and dark.

فقدان الطاقة وايقاظ الجهد للبروتون في البلازما == Energy loss and wake potential of proton in plasma

اسم المؤلف: بيداء محسن احمد
اسم المشرف: خالد عبد الوهاب احمد | رياض خليل احمد
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: فيزياء البلازما
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم دراسة صيغة قدرة الايقاف وايقاظ الجهد في البلازما الكلاسيكية باستخدام نماذج (Vlasove and Fried - Cont) بالاعتماد على دالة تشتت العزل ((∈(k,ω))) للايونات المتصادمة (المنفردة، العناقيد والعناقيد الثنائية) ولمعاملات مختلفة. يتضمن العمل ثلاث دراسات تعتمد على الايقاف وايقاظ الجهد. يصف هذا النموذج تاثير فقدان الطاقة للايونات المنفردة والجماعية على ثلاث منظومات مختلفة (Tokamak, Z - pinch and ICF). كذلك تم دراسة تاثير التركيب الهندسي لفقدان الطاقة وايقاظ الجهد للبروتون الساقط على نفس المنظومات السابقة ولحالات مختلفة. وتم برمجة كل المعادلات بواسطة برنامج (Fried - Conte.for.) بلغة فورتران 90. ان تحسين قدرة الايقاف في حالة البروتون المترابط اعطت نتائج افضل من البروتون المفرد بسبب ظهور تاثير التداخل في الحالة الاولى. وكذلك عند زيادة المسافة بين الجسيمة المقذوفة والهدف فان الايقاف يقل بسبب ما تعانية القذيفة من فقدان للطاقة في مسارها. كذلك عند تسقيط القذائف داخل وخارج كرة ديباي فان فقدان الطاقة يقل في حالة (R<λ_D) بسبب تاثير كولوم والعكس صحيح. تم دراسة تاثير الزوايا على فقدان الطاقة للبروتون عند تصادمه بزوايا (0, 30, 60, 90) وعلى ثلاث منظومات فلاحظنزايادة في فقدان الطاقة مع ازدياد قيمة الزوايا، وهذا يعني ان افضل ايقاف عند الزاوية (π⁄2). اعتمدت نظرية (Bohm and Pines) لغرض التحقق من تاثيرات الايونات المنفردة والجماعية على فقدان الطاقة في البلازما واستخدمت الطرق العددية في التكاملات والتقريبات التحليلية للسرع الواطئة والعالية باعتماد الحالات الكلاسيكية والكمية، فلوحظ اختلاف بالنسب المئوية بين المنظومات بسبب الاختلاف في الكثافة والسرعة الحرارية بينها. كما تم دراسة تاثير التداخل على فقدان الطاقة لمنظومات البلازما الثلاثة، وذلك لكثافات ودرجات حرارة مختلفة لهذه المنظومات، والتي اظهرت ان توزيعات الانماط الجماعية تقل مع درجة الحرارة وتزداد مع الكثافة. تم حساب ايقاظ الجهد للايونات المتصادمة في البلازما باستخدام كثافات مختلفة لمنظومات البلازما الثلاثة. فتبين وجود زيادة في ايقاظ الجهد مع الكثافة لكل منظومة. وتمت دراسة تاثير التركيب الهندسي واخذ شكل المثلث لمعاملات مختلفة (طول ديباي، ارتقاع المثلث وطول قاعدة المثلث) من تاثير طول ديباي على المنظومات الثلاث نجد ان فقدان الطاقة يقل مع زيادة طول ديباي. اخذنا حالات عديدة عند دراسة تاثير التركيب الهندسي على ايقاظ الجهد (قذيفتان متتاليتان، قذيفة تقود خلفها قذيفتان وقذيفتان تقود خلفها قذيفة) فوجدنا ان منظومة (Z - pinch) اكثر تماثلا من (Tokamak وICF). | In the present work the expression of the stopping power and wake potential in classical plasma are study by using Vlasove and Fried - Conte models depending on dielectric dispersion function (∈(k,ω)) for incident ions (single, clusters and diclusters) at different parameters. The work includes three studies depending on stopping and wake potential, this model describe the energy loss of individual ions and collective effect on three plasma systems (Tokamak, Z - pinch and ICF), where ICF is inertial confinement fusion. So study effect the geometrical structure of energy loss and wake potential of incident proton on the same three systems in different cases. All equation programed by Fried - Conte.for. written in Fortran - 90. The enhanced stopping power in case correlated proton best than the point - like because appear the interference effect in the first case. As well when increases the distance between incident projectile and target the stopping decreases, because the projectile suffer more collisions. So when incident projectiles (inside and outside) Debye sphere, energy loss decreases in case (R<λ_D) because of coulomb effect, vice versa. As well study effect the angles on the energy loss, where incident proton in different angles (0, 30, 60 and 90) on three systems note increases the energy loss with angle. This mean the best stopping at (π/2). Depending on Bohm and Pines theory to investigation the effect of individual and correlated ions of energy loss in plasma. Using the numerical method to integral, and analytical approximations for low and high velocities depending on the classical and quantum cases, note the different in scale percentage between systems because the difference in density and thermal velocity between them. The Interference effect in the energy loss for three plasma systems. By using different densities and temperature, show that the Contribution of collective modes decreases with temperature and increases with density. The wake potential of incident ions in plasma calculated by using different densities for three plasma systems. The wake potential increase with density for each system. As well study effect the geometrical structure and take the form of a triangle for different parameters (Debye length, height of a triangle and length of the triangle base). From effect Debye length (λ_D) for three plasma systems the energy loss decreases with increases the Debye length. Several cases taking in to account when study the effect of structure on wake potential, (Two - collinear projectiles, Projectile leading two behind and two projectiles leading one behind). Note the plasma system (Z - pinch) it’s the more systematic than (Tokamak and ICF) systems.

التوصيلية الضوئية للمفرق الهجين a - GaAs : Zn/c - Si == Photoconductivity of a - GaAs : Zn/c - Si Heterojunction

اسم المؤلف: ايمان كاظم جبر
اسم المشرف: حسين خزعل رشيد | رامز احمد الانصاري
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: حضرت اغشيه زرنيخات الكاليوم المشوب بعنصر الزنك بنسبة 1% GaAs : Zn باسماك مختلفة mµ(1.0 ,0.75 ,0.5 ,0.25) بتقنية التبخير الوميضي على ارضيات زجاجية ورقائق من c - Si بدرجة حرارة الغرفـة وتحت ضغط فراغي 10 - 5 mbar وبمعدل ترسيب مقارب الى 0.92Å/s لدنت هذه الاغشية بدرجات حرارة تلدين مختلفة K(373, 473 ) لمدة ساعة واحدة ولدراسة الخواص التركيبية تم تلدين اغشية زرنيخ الكاليوم المشوبة بالزنك والمرسبة على الزجاج بسمك mµ0.5 الى درجة حرارة and773)K473,373).تم دراسة الخواص التركيبية للاغشية المحضرة على ارضيات زجاجية بواسطة حيود الاشعة السينية XRD وقد اظهرت نتائج حيود الاشعة السينية ان الاغشية الملدنة بدرجة حرارة اقل من 473K ذات تركيب عشوائي وبزيادة درجة حرارة التلدين اصبح التركيب متعدد التبلور F.c.c عند درجة حرارة 473K وبالاتجاه المفضل (111) ,اما دراسة خصائص السطح المورفولوجية بواسطة مجهر القوة الذري (AFM) , فقد وجد ان خشونة السطح تقل مع زيادة درجة الحرارة التلدين وتزداد مع زيادة السمك اما الحجم الحبيبي فوجد انه يزداد مع زيادة درجة حرارة التلدين والسمك.درست الخصائص الكهربائيــة للاغشية المحضرة على ارضيات زجاجية بتغير السمك ودرجة حرارة التلدين حيث ازدادت التوصيلية الكهربائية المستمرة (2.05 - 59.3) 10 - 3 (.cm) - 1 لجميع الاغشية المرسبة بزيادة السمك وبدرجة حرارة الغرفة قلت (15.1 - 2.39) 10 - 3 (.cm) - 1 بزيادة درجة حرارة التلدين من (RT - 473)K للاغشية ذات سمك 0.5mm، قلت طاقات التنشيط الكهربائية (Ea1& Ea2)بزيادة سمك الغشاء وزادت بزيادة درجة حرارة التلدين (RT - 473)K. اظهرت قياسات التوصيلية المتناوبة لاغشية الـ GaAs : Zn باسماك مختلفة وبدرجات حرارة تلدين مختلفة بانها تنطبق مع نموذج تنطط الحاجز المرتبط(CBH) . وبينت قياسات هول الى ان جميع الاغشية هي من النوع (p - type)، وتركيز الحاملات يزداد - 89.29 )×1016 cm - 3 (0.08 بزيادة سمك الغشاء وتقل (1.95 - 0.21)×1016 cm - 3 بزيادة درجة حرارة التلدين (RT - 473)K. وكذلك لاحظنزايادة قيم التحركية بزيادة درجة حرارة التلدين ,بينما تقل مع زيادة السمك.اظهرت القياسات البصرية لاغشية a - GaAs : Zn بان الانتقالات البصرية كانت مباشرة مسموحة ذات فجوة طاقة تزداد مع زيادة درجة حرارة التلدين بينما تقل مع زيادة السمك.قيست سعة الانحياز العكسي للمفرق الهجين a - GaAs : Zn/c - Si كدالة لفولتية الانحياز وبتردد 100KHz وقد دلت هذه النتائج على ان المفرق من النوع الحاد، لوحظ تناقص السعة بزيادة جهد الانحياز العكسي، وايضا لوحظ ان السعة تقل بزيادة سمك الغشاء وتتناقص مع زيادة درجة حرارة التلدينF/cm2(2.24 - 1.54) للسمك 0.5µm. وجد ايضا ان جهد البناء الداخلي للمفرق يتناقص 0.15)Volt (0.40 - عند زيادة السمك .درست خواص تيار - فولتية للمفرق الهجين a - GaAs : Zn/c - Si تحت ظروف الظلام وقد وجد بانها تتفق مع نموذج اعادة الاتحاد - الاختراق ، كذلك اظهرت النتائج ان كثافة التيارتقل بزيادة درجة حرارة التلدين وسمك الغشاء وذلك بسبب زيادة العيوب عند سطح المفرق. وعامل المثالية يزداد بزيادة سمك الغشاءمن(2.4 - 2.7). ومن خلال قياسات تيار - فولتية تحت ظروف الاضاءة وجدنا ان كثافة التيار الضوئي يزداد مع زيادة درجة حرارة التلدين ويقل مع زيادة السمك.درست خواص كثافة تيار الدائرة القصيرة وفولتية الدائرة المفتوحة حيث وجدنا ان ,Jsc Voc, تزداد قيمهم بزيادة درجة حرارة التلدين | GaAs weight doping percentage by 1% Zinc (GaAs : Zn) films have been deposited by flash evaporation technique on glass and c - Si wafer substrates at room temperature under vacuum of 10 - 5 mbar with rate of deposition near to 9.25Å/sec. These films of different thicknesses (0.25, 0.5, 0.75, 1.0) µm have been annealed at different temperatures Ta (373, 473)K for to study the properties of structure of a - GaAs : Zn films that deposited on glass substrate with thickness 0.5 µm annealed at (373, 473 and 773)K. The structural characteristic of the films prepared on glass substrates have been studied by using X - ray diffraction, which shows that the films have amorphous structure for sample annealed at Ta> 473K. The samples annealed at 473 K showed a polycrystalline with Face - Center cubic system preferred orientation along (111).The surface morphological characteristics were studied by atomic force microscope (AFM) which show that decreased in surface roughness with increasing annealing temperature and increased with thickness increases. The grain size increases with increasing annealing temperature and thickness.Electrical properties of the films prepared on glass substrates were studied with different thicknesses and annealing temperatures. The D.c conductivity for all deposited films increases from (2.05 to 59.3) 10 - 3 (.cm) - 1 with thickness increases at room temperature and decreases from(15.1 to 2.39) 10 - 3 (.cm) - 1 with increase of annealing temperature from RT to 473K for films of 0.5m. The electrical activation energies Ea1and Ea2 decrease with thickness increases and increasing with increasing of annealing temperature from room temperature to 473K. A.C conductivity measurements for GaAs : Zn films with different thickness and annealing temperatures were consistent with correlated barrier hopping model (CBH).Hall measurements showed that all the films are p - type with carrier's concentration increasing from( 0.08 to 89.29)×1016 (cm) - 3 with film thicknes increase and decreasing from (1.95 to 0.21)×1016 (cm) - 3 with increasing of annealing temperature from room temperature to 473K. Also we observe that the mobility values decreases with thickness increases and increasing with increasing of annealing temperature. The optical measurement showed that the nature of the optical transition has been direct allowed with band gap energies increases with increasing of annealing temperature while decreases with increases of film thickness.The reverse bias capacitance for a - GaAs : Zn/c - Si heterojunction was measured as a function of bias voltage at frequency 100 KHz, and it is indicated that these heterojunction are abrupt. The capacitance decreases with increasing the reverse bias voltage, also decreasing with increasing annealing temperatures from (2.24 to1.54) ×10 - 7 F/cm2 for film thickness 0.5 µm and with increasing film thickness.The value of built - in potential for heterojunction decreases from (0.4 to 0.15) Volt with increasing of thickness.while increases with increasing temperature from (0.3 - 0.4) Volt for film thickness 0.5 µm.The J - V characteristics of the a - GaAs : Zn/c - Si heterojunction under dark have been studied under dark condtion. This may be in agreement with tunneling recombination model. Furthermore, the product shows that the current density decreases with the increasing of annealing temperature and film thickness for the increases in the defects at heterojunction interface. The ideality factor increases with the increasing film thicknes from (2.4 to 2.7). Under illumination, the photocurrent density increases with increases of annealing temperatures and it decreases with the increases of thickness. The short - circuit current density and open - circuit voltage have been studied where the Jsc ,Voc , increase with the increasing of annealing temperatures

دراسة تاثير تركيزانابيب الكاربون النانوية متعددة الطبقات على الخصائص الفيزيائية لمتراكبات الايبوكسي == Study The Effect of Multi Walled Carbon Nanotubes (MWCNTs) Concentration on Physical properties of Epoxy composites

اسم المؤلف: الفت احمد محمود
اسم المشرف: خالد رشاد الراوي | عدوية جمعة حيدر
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Multi wall carbon nanotubes (MWCNTs) have excellent mechanical, electrical, and thermal properties. When MWCNTs incorporated in to polymer, that’s leads to better improvement in mechanical, electrical, and thermal properties result at low MWCNTs content. Due to the change in the electrical and mechanical properties MWCNTs / Epoxy composites have attracted significant research interest specially due to their potential for application in active control of strain sensing in composites structure or as strain sensor .Different type of MWCNTs, long and short (L - MWCNTs & S - MWCNTs) were used as reinforcement in epoxy resin with volume fraction ( 0.1,0.2, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0 ,4.5, & 5%) respectively were used to prepare epoxy composites in order to examine and study some of their mechanical properties ( tensile strength, Young's modulus, flexural strength, fracture toughness, flexural modulus, Impact strength, and microhardness ), conductivity properties (AC conductivity, thermal conductivity), and morphology properties (SEM,FTIR). Direct mixing processes use to prepared (Epoxy / MWCNTs) composites, its involved use ultrasonic and magnetic stirrer bar mixing process to disperse the MWCNTs into the epoxy resin system. The results shown an improves in the mechanical, thermal, and electrical properties with increase volume fraction (0.1 to 2%), and then decreased with further increasing the MWCNTs content but stay higher than of pure epoxy. At (1.5%) we observed enhancement in tensile strength (28.19%, 15.74%) and Young's modulus (35.71%, 30.95%) for L - MWCNTs and S - MWCNTs respectively, and the higher enhancement in flexural modulus and flexural strength due to 2% vol. fraction of L - MWCNTs reached to (71.43 %, 102.26 %). The high impact strength and microhardness values result at (1. 5%L - MWCNTs) reached to (823.996%), and (41,102%) respectively.Better improvement in thermal conductivity and AC conductivity result at 2% volume fraction for both MWCNTs types compare with pure epoxy. The high thermal conductivity values due to L - MWCNT reached to (369.31%) or three times from the thermal conductivity of pure epoxy, compare with the value of enhancement for S - MWCNTs (183.39 %).Investigations of electrical properties of MWNT/polymer show a significant increase of electrical conductivity with the increase of the MWCNTs content. The AC. electrical conductivity of the sample with 2 % vol. fraction L - MWCNTs reached to four orders of magnitude higher than that of the pure polymer at a frequency range of (5E 4 to 5 E6) Hz, its present(9.66E - 7 to 5.78E - 5 Ω/cm) compare with the AC. electricalconductivity for S - MWCNTs ( 6.57 E - 11 to 2.24E - 5 Ω/cm) at same volume fraction and frequency range and with the electrical conductivity of pure epoxy (4.5E - 12 to 6.2E - 9 Ω /cm).Scanning Electron Microscope images illustrate the morphology of tensile fractured surface of EP/MWCNTs composites, although the morphologies of tensile fractured surface show ductile fracture with dispersed stresses in more than one crack propagation. Increased roughness and ductile behavior shown with increased volume fraction of MWCNTs. Above 2% vol. fraction of MWCNTs we shown increase the agglomeration that’s lead to decrease in properties of epoxy composites.
1 ... 7 8 9 10 11 ... 14