عرض: 25 50 75 100 النتائج

نتائج البحث: 25 من أصل 166

تاثير اضافة بولي اثيلين اوكسايد على خصائص بعض البوليمرات في التطبيقات الطبية == Influence of Adding Polyethylene Oxide on Some Polymer Properties for Medical Applications

اسم المؤلف: احمد شاكر حسين كحيط
اسم المشرف: رحيم كعيد كاظم حسين المرشدي
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تضمنت الاطروحة دراسة الخصائص الفيزيائية لبوليمر بولي اثيلين اوكسايد (PEO) باستخدام المذيب ثنائي ميثيل الفورماميد (DMF) باستخدام تراكيز مختلفة (0.1% - 0.8% ) (غم / مل) قبل وبعد اضافة بعض البوليمرات ومن هذه البوليمرات بوليمر بولي اثيلين كلايكول (PEG) والبوليمر بولي مثيل ميثاكريليت ( PMMA) باوزان مختلفة. وتم دراسة الخصائص الريولوجية والبصرية والميكانيكية والكهربائية للنماذج المحضرة السائلة والصلبة حيث : تم قياس الخصائص الريولوجية للعينات مثل (الكثافة واللزوجة القصية)، ثم تم قياس انواع اخرى من اللزوجة مثل اللزوجة النسبية , اللزوجة النوعية , اللزوجة المختزلة , اللزوجة الذاتية ، اما معدل اللزوجة للوزن الجزيئي ونصف القطر الجزيئي الفعال فقد تم حسابها نظريا.وكذلك تم قياس الخصائص البصرية مثل (الامتصاصية ومعامل الانكسار)، ثم من هذه الخصائص تم حساب الخصائص الاخرى مثل (النفاذية ، الانعكاسية ، ومعامل الامتصاص للموجات الكهرومغناطيسية ، وزمن العمر الطبيعي، ومعامل الرقة ، الانعكاس المولاري، الزاوية الحرجة وزاوية بروستر).وايضا تم قياس الخصائص الميكانيكية مثل السرعة للموجات فوق الصوتية والتي تم قياسها على تردد ثابت قيمته (25 كيلو هرتز) اما الخصائص الاخرى تم حسابها نظريا , مثل : معامل الامتصاص للموجات فوق الصوتية , زمن الاسترخاء , سعة الاسترخاء , الانضغاطية , معامل المرونـة الحجمي , الممانعة الصوتية النوعـــية .بالنسبة للخصائص الكهربائية تم قياسها مثل التوصيلة الكهربائية ، وبالتالي حسبت الخصائص الاخرى مثل التوصيلية المولارية ودرجة التفكك . وقد تم قياس كل هذه الخصائص لحالتين قبل وبعد الاضافة في درجة حرارة الغرفة .واظهرت النتائج ان الخصائص السابقة تزداد مع زيادة التركيز باستثناء اللزوجة الذاتية ، النفاذية، الانعكاسية المولارية، الزاوية الحرجة، الانضغاطية، التوصيلة المولارية ودرجة التفكك تتناقص مع زيادة التركيز.تم الحصول على نتائج جديدة لمزيج من البوليمر ولقد استخدمت هذه النتائج في جانب من التطبيقات الطبية ، والتي تضمنت الامتصاصية والنفاذية ، وكذلك من ناحية اخرى ، هناك جانب تم تطبيقه وهو ملاحظة تاثير اضافات البوليمرات على بكتيريا جلد الانسان عند استعمال ثلاثة انواع من البكتريا .حيث لاحظنا عدم تاثر البكتريا عند اضافة كل من بوليمر بولي اثيلين كلايكول وبوليمر بولي مثيل ميثاكريليت والمذيب ثنائي الميثيل فورماميد والمستحضر ( بصورة انفرادية) عند اخذ نسبة (1 : 1) لذلك تستخدم كمواد قابلة لامتصاص الاشعة فوق البنفسجية ولاتستخدم كمواد معقمة اما مايخص بوليمر بولي اثيلين اوكسايد فقد لاحظنا تاثر البكتريا به ولمسافة (15) ملم حيث يمكن استخدامه كمادة قابلة لامتصاص الاشعة فوق البنفسجية وكمادة معقمة ويعتبر هذا احد التطبيقات الطبية الجديدة ، لذلك هناك العديد من التطبيقات التجريبية في التطبيقات الطبية المختلفة التي تم الحصول عليها من هذه الدراسة ، مثال على ذلك : عندما نستعمل بولي اثيلين اوكسايد وكذلك عندما نضيف له بوليمر بولي اثيلين كلايكول والبوليمر بولي ميثاكريليت المثيل حيث تم اضافة المزيج الى ثلاثة انواع من مستحضرات التجميل ، وثلاثة انواع من مرهم المفاصل ونوعين من جل الشعر، وهذه المخاليط ادت الى تحسين الامتصاصية عن طريق زيادة امتصاص (الاشعة فوق البنفسجية ) وجعل الجلد اقل تهيجا.ونلاحظ كذلك ان فحوصات (FT - IR) للاطياف اظهرت عدم وجود تفاعل كيميائي بين ( (PEO الذي ووزنه الجزيئي (300000) ومضافاته حيث استخدمت تقنية اقراص (KBr)) لذلك.العلاقة بين الخصائص التي تمت دراستها والتطبيقات الطبية هو الفائدة من زيادة الامتصاصية وتقليل النفاذية حيث ان الفائدة في الاضافة لهذه المراهم للحد من امتصاص الجسم للاشعة فوق البنفسجية، فضلا عن خصائص الريولوجية التي تؤدي لزيادة اللزوجة للمراهم وبالتالي زيادة الكثافة ومعامل الانعكاس مما يقلل من نفاذية الاشعة (الاشعة فوق البنفسجية) للجسم، بالنسبة للخصائص الميكانيكية والكهربائية لوحظ تحسن كبير في هذه الخصائص التي يمكن استخدامها كبحوث وتطبيقات في المستقبل | The dissertation has included study of some physical properties of polymer polyethylene oxide (PEO) dissolved in Dimethylformamide (DMF) with different concentrations ranged from (0.1% - 0.8%) g./ml before and after adding Polymers such as polyethylene glycol (PEG ) and Poly(methyl methacrylate) (PMMA ) of different weights. The rheological, optical, mechanical, electrical properties for samples at prepared by liquid and solid have been studied and the study show : For rheological properties such as : (density and shear viscosity ),has been measured , then other types of viscosities are measured , such as : relative viscosity , specific viscosity , reduced viscosity , intrinsic viscosity. While for viscosity average molecular weight and effective molecular radius have been theoretically calculated. Also the optical properties had been measured such as ( absorbance and refractive index ), then from these properties were calculated optical parameters and optical constants such as ( transmittance, reflectance, absorption coefficient of electromagnetic waves, natural lifetime, coefficient of fineness, molar reflectance, critical angle and Brewster angle ). Also the mechanical properties of ultrasonic wave velocity at a constant frequency (25 kHz) has been measured and other properties were theoretically calculated such as : absorption coefficient of ultrasonic waves , relaxation time , relaxation amplitude , compressibility, bulk modulus , and specific acoustic impedance for ultrasonic waves. For the electrical properties have been measured such as electrical conductivity and other properties such as (molar conductivity and degree of dissociation) have been calculated after that.The results showed that previous properties have increment with the increase of concentration except reduced viscosity , transmittance , molar reflectance ,critical angle, compressibility, molar conductivity and degree of dissociation are decreasing with increasing of concentration . New results were obtained to a combination of polymer and these results have been utilized in the side of medical applications, which included the absorbance and transmittance, in the other hand, the effect of polymer addition on human skin has been applied according to a note , when using three types of bacteria . Where noticed the bacteria is not affected when adding each of the polymer (polyethylene glycol , Poly(methyl methacrylate)) , solvent Dimethylformamide and mixture when taking the ratio (1 : 1) individually , so it is used to absorb ultraviolet rays and not used as sterile . For polymer polyethylene oxide noticed effect on bacteria for distance (15) mm , where it can be used to absorb ultraviolet rays and sterile , this is one of the new medical applications , so there are many experimental applications in different medical applications obtained from this study, such as : The solutions of (PEO) , (PEO - PEG) and (PEO - PMMA) blends that have been added into three types of cosmetics, three types of ointment of joints and two types of hair gel , these blends enhance them by the increase of (UV) absorbance that makes less skin irritation. The (FT - IR) spectra showed that there was no interaction between (PEO) ( 300000 ) and all additives when it has prepared by (KBr) disks technique. The relationship between the properties that have been studied and medical applications in the usefulness increase absorbance and decreases transmittance that has to take advantage of it in the addendum to the ointments to reduce the body's absorption of (UV) rays , as well as rheological properties led to increase the viscosity of ointments and thereby increase the density and reflection coefficient which reduces the transmittance of (UV) rays to the body , for mechanical and electrical properties noticed a significant improvement in these properties, which can be used research and applications for the future

ترميم الصور الرقمية باستخدام خوارزمية المرشح التكراري == Restoration of Digital Images Using an Iterative Tikhonov - Miller Filter

اسم المؤلف: هاله كاظم حسن
اسم المشرف: اياد عبد العزيز العاني
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: لقد تم تطبيق المعالجات الصورية في العديد من المجالات العلمية كعلوم الفيزياء والحاسوب والهندسة والكيمياء والبيولوجيا والطب. من المعروف ان عملية الحصول على الصورة باستخدام الطرق البصرية او الالكترونية والتي عادة ما تكون معرضة للتشويه من قبل بيئة المتحسس. مجال ترميم الصورة هو احدى مجالات معالجة الصورة الرقمية الذي يهتم بتحسين الصورة المشوهة. ترميم الصورة ممكن ان يكون خطي او غير خطي واعمى او غير اعمى. تم التركيز في هذا البحث على ترميم الصور الخطي والغير اعمى وفرض ان موديل تشوية الصورة هو عبارة عن التفاف داله الغشاوة بالصورة الاصلية واتلفت باضافة ضوضاء جمعية وان خوارزمية ترميم الصورة هي محاولة للتخلص من داله الغشاوة والضوضاء من الصورة المشوهة بفك التفاف دالة التشويه بالصورة المشوهة وتقليل الضوضاء لانتاج صورة مقدرة قريبة من الصورة الاصلية . الصور المستخدمة شوهت بواسطة دالة غشاوة كاوسية مختلفة الانحراف المعياري σ =1,2 وضوضاء كاوسية جمعية مختلفة بنسبة الاشارة الى الضوضاء SNR= 5,10, 20. التشوية استخدم لعدة انواع من الصور وهي الصورة الرمادية (صورة الستلايت )وصورة السونار (صورة الجنين) والصورة الملونة (صورة الطائر). وينر فلتر وفلتر ميلر - تكنهوف التكراري استخدمت لترميم الصور المشوهة. بواسطة مقياس جذر معدل مربع الخطاء لقد استنتجنا ان افضل اداء لوينر فلتر هو عندما يكون التشويه عالي اي ان نسبة الاشارة الى الضوضاء قليلة وافضل اداء لميلر - تكنهوف التكراري هو عندما يكون التشويه قليل اي ان نسبة الاشارة الى الضوضاء عالية. | Digital images are applied in various fields such us : physics, computer, engineering, chemistry, biology and medication sciences. It have been known that any images acquired by optical or electronic means is likely to be degraded by the sensing environment. Image restoration, is one of digital image processing field, which is care about improving the degraded image. Image restoration may be linear or non - linear and blind or non - blind. The following research focusing on linear non - blind image restoration and assuming that the degradation model as a convolution of the original image with blurring function and distorded by additive noise. Image restoration algorithms are trying to "undo" the blurring function and the noise from the degraded image by deconvolving the blurring function and reducing the noise from the degraded image to produce an estimate image, which it approach to the original image. The image have been used, blurred by Gaussian blurring function with selected standard deviation values σ = 1,2 and degraded by additive Gaussian noise with selected signal to noise ratio values SNR= 5, 10 and 20. The degradation have been used for three type of images, these are gray image (Satellite image), sonar image (Embryo image) and color image (bird image). Iterative Tikhonov - Miller filter and Wiener filter have been used to restore the degraded images. Using Root Mean Square Error (RMSE) measuring it have been concluded that, Iterative Tikhonov - Miller filter has better performance for less degradation parameters, with high SNR and Wiener filter has better performance for more degradation parameters, with low SNR.

دراسة عامل تراكم الجرعة لاشعة كاما في الماء والكرافايت ضمن مدى الطاقة (10 - 4) م. ا. ف == A Study of Gamma Ray Dose Buildup Factors in Water and Graphite, in the Energy Range (4 - 10) MeV

اسم المؤلف: حنان محمد جواد
اسم المشرف: ليث عبد العزيز العاني
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: لقد اجريت دراسات عديدة لقياس عامل التراكم لاشعة كاما بانواعه المتعددة لما له من اهمية في قياس الجرع الناتجة من استخدام الاشعة الكهرومغناطيسية وفي تدريعها. في هذه الدراسة تم حساب عامل تراكم اشعة كاما لاثنين من مواد التدريع (الماء والكرافيت) ضمن مدى الطاقة (4 - 10) مليون الكترون فولط، ولغاية سمك 5 معدل مسار حر, لتحقيق هذه الدراسة تم كتابة وتنفيذ برنامج محاكاة باستخدام لغة Visual Basic language اصدار Gوتطبيقه اعتمادا على اسلوب محاكاة مونتي كارلو.الفكرة الاساسية للبرنامج تشمل وصف السلوك الحقيقي للاشعاع والتنبؤ بحركتة العشوائية خلال الوسط. يمكن استخدام هذا الاسلوب لمحاكاة المسالة التقليدية (الكلاسيكية) الناتجة عن سقوط الاشعاع على شريحة مسطحة تعمل كموهن لاشعة كاما. الشكل الهندسي للمصدر المشع الذي اعتمد في هذه الدراسة هو مصدر مستوى عمودي احادي الطاقة.في هذا البحث تم دراسة عامل تراكم الجرعة لاشعة كاما بوجود وعدم وجود تاثير انتاج الزوج ولنفس الطاقة. كما تم دراسة عدد من المتغيرات المتعلقة بتصميم البرنامج والمسماة متغيرات المحاكاة والتي تتضمن عدد اشعة كاما التي يمكن تتبعها وعدد تقسيم مدى الطاقة. تم دراسة اعتماد عامل التراكم على كل من طاقة الفوتون الساقط, عمق الاختراق والعدد الذري لمادة الدرع في حساب عامل تراكم اشعة كاما اظهرت النتائج ان عامل تراكم الجرعة لاشعة كاما يتناسب عكسيا مع زيادة الطاقة. ويمكن تبرير هذا السلوك بما يلي : عند زيادة الطاقة (ضمن مدى الطاقة المدروس) فان احتمالية استطارة كومبتن تتناقص، لان تاثير كومبتون يتناسب عكسيا مع زيادة طاقة. كذلك فان زيادة الطاقة تؤدي الى زيادة قدرة اختراق اشعة كاما في الوسط وهذا يؤدي الى انخفاض احتمالية الاستطارة بزوايا صغيرة وهذا ينعكس على حساب عامل تراكم الجرعة (حيث انة الاستطارة بزوايا صغيرة لها دور كبير في حساب عامل التراكم ). لكل من الكرافيت والماء، اظهرت النتائج الى ان القيم المحسوبة من عامل تراكم الجرعة لاشعة كاما عند عدم وجود تاثير انتاج الزوج اقل مقارنة عند وجود تاثير انتاج الزوج حيث تبقى مساهمة استطارة كومبتن هي الغالبة مقارنة مع تاثيرالفناء(تاثير انتاج الزوج) ضمن مدى الطاقة (4 - 10) مليون الكترون فولط .النتائج التي تم الحصول عليها بالنسبة للماء من برنامج محاكاة مونتي كارلو في هذه الدراسة كانت قريبة جدا الى بعض النتائج التجريبية المنشورة بالمقارنة مع نتائج محاكاة مونتي كارلو التي تم الحصول عليها من بعض الابحاث المنشورة. حيث تعتبر المقارنة مع النتائج التجريبية افضل وسيلة للحكم على النتائج المستحصلة نظريا. | Several studies have been conducted to measure different type of gamma ray buildup factor for its importance in measuring the dose resulting from Electromagnetic rays use and its shieldingIn this study gamma ray buildup factor for two shielding materials water (Zeff =7.42) and graphite (Z=6) within the energy range 4 - 10 MeV and up to 5 thickness mean free path has been studied. To achieve this study a simulation computer program has been written (Visual Basic language version G) and applied depending on Monte Carlo simulation method. The basic idea of the program includes real radiation behavior description and prediction of its random movement through the media. This method can be used to simulate a traditional problem (classic) resulting from the fall of the beam on the flat slide works as attenuator for gamma rays. The radioactive source geometry adopted in the study is mono energetic normal plane sourceIn this research the contribution of annihilation effect on the calculation of gamma ray dose buildup factor has been studied in the same energy and within the studied energy range. This study also examining a number of variables related to the program design called simulation variables like number of gamma scenarios, number of divisions for energy. This research is also including study the effect of energy for the incident photon, shield thickness, and atomic number for shielding material on the calculation of gamma ray buildup factor. The results indicated that the gamma ray dose buildup factor is inversely proportional with energy increase. This behavior means that when the energy within the studied energy range is increased, the probability of Compton effect decrease, since the Compton effect is inversely proportional with energy. Second, the penetrating ability for gamma radiation is also increase and this leads to an decrease in the probability of scattering with small angels and finally it is reflected on the calculation of dose buildup factor (the scattering with small angels plays a very important role in the calculation of buildup factor). For both graphite and water, although the results indicated that the calculated values of dose buildup for plane source when the contribution of pair production is ignored, less in comparison when the contribution of pair production is taken in consideration but the contribution of Compton effect is still more predominant than the effect of annihilation within the range of energy (4 - 10) MeV.The results obtained from the performed Monte Carlo simulation program in this study are very closer to the published experimental results (error = 10.4%) in comparison with Monte Carlo simulation results (error = 40.58%) obtained from some published researches. The comparison with experimental result is the best way to judge on the accuracy of the results obtains theoretically

تطوير واستخدام منظومه كشف المواد المتفجرة عن بعد == Development and Optimization of Stand off Explosive Material Detection System

اسم المؤلف: ولدان محمد عواد
اسم المشرف: سهى موسى خورشيد الاوسي | كمال حسين لطيف
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: In order to develop a effected method to reveal the presence of explosive, numerous detection techniques have been studied that are capable of detecting explosives, The current study provides an overview of the present techniques like LIBS which is an atomic spectroscopy, and examined a new technique for detecting called laser induced fluorescence (LIF).LIF essentially measures the optical emission of the excited energetic materials by laser. The use of LIF has led to the discovery of unreported optical characteristics of some compounds that are exclusive to the individual material, like the phase shift and the modulation depth of the fluorescence signals.A high resolution spectrometer is used to record the fluorescence emission wave length for three types of explosive materials, These optical characteristics consist of fluorescence shoulders of the three samples in the wave length between (300 - 370) nm .Using fast rise time photo multiplier and spatial amplification for the fluorescence signal enable us to detect the time domain fluorescence spectrum for three types of explosive materials (AN), (TNT),( C4) and other non - explosive material, this method used Carefully for 8m standoff detection, different type of substrate is examined to simulate the real scan, both the time domain and frequency domain is measured for efficient LIF spectroscopy that give us a total configuration of the tested sample.A library of a total time configuration for different type of material s spectrum enables us to develop a algorithms to distinguish between expl osive and non - explosive material. Used to develop a recognition program to achieve high sensitive detection system.

تاثير المسافة بين الاقطاب ومادة الهدف باستخدام الترذيذ المغناطيسي ذو التيار المستمر == The Effects of Electrodes Separation and Target Material by DC Discharge Magnetron Sputtering

اسم المؤلف: بان فيصل رشيد
اسم المشرف: خالد عباس يحيى
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تتكون منظومة الترذيذ البلازمي من حجرة تفريغ اسطوانية مصنوعة من مادة (Bolosilicate) وتحتوي على قطبين دائرين من st. st. يحمل الكاثود, مادة الهدف وكذلك المغناطيس الثابت اما قطب الانود فيحمل النماذج الزجاجية التي سوف يتم طلاءها .في هذا البحث استخدمت مادتي الذهب والفضة كمادة لهدف. الهدف من هذه الدراسة, هو دراسة تاثير عوامل التشغيل مثل, المسافة بين القطبين ونوع مادة الهدف على خصائص اشكال سطح زجاجي مطلي بوجود المجال المغناطيسي والتي تمت دراستها باستخدام مجهر القوة الذرية (AFM). وايضا تم تحديد درجه حرارة الالكترون وكثافة الايونات والالكترونات واعلومات البلازما الاخرى بواسطة مجس لانكمور المنفرد عند ضغط ثابت (0.2 mbar).اظهرت نتائج هذه الدراسة بينت وجود زيادة خطية في كثافة الالكترونات والايونات وانخفاض اسي في درجة حرارة الالكترونات عند تغير المسافة بين القطبين ولخمسة قيم و(3,4,4.5,5 and 6)cm لمادتي الذهب والفضة وايضا تبين ان فولتيات التفريغ باستخدام الذهب كهدف هي اكبر منها في حالة الفضة. كذلك, وجد انه بزيادة المسافة بين القطبين فان درجة حرارة الالكترونات تقل لمادتي الذهب والفضة وكثافة الايون تزداد مسببة زيادة في قطر وارتفاع الحبيبة لتيار الترذيذ((I_d=30 mA باستخدام الذهب بينما يقل قطر الحبيبة ويزداد ارتفاعها باستخدام الفضة لتيار الترذيذ( (I_d=40 mA. من ناحيه اخرى, ان قيم درجة حرارة الالكترون باستخدام الفضة هي اكبر من القيم باستخدام الذهب وان علاقة قطر الحبيبة, وارتفاعها وخشونة السطح كدالة للمسافة بين القطبين هي ليست خطية. اصغر قيمة لمعدل قطر الحبيبة وارتفاعهاحصلنا عليه هو(90 nm) وnm)6) على التوالي لمادتي الذهب عند تبار الترذيذ ((I_d=30 mA و( . (d=4 cm وللفضة نفس قيمة قطر الحبيبة باستخدام الذهب عند(d=5 cm) لكن بارتفاع5.5 nm) ) عند (d=4 cm) ولتيار الترذيذ (I_d=40 mA). واصغر معدل ارتفاع للحبيبة لكل تيارات التفريغ 20,30,40,50 and 60 mA)) عند نفس المسافة بين القطبين (d=4 cm) باستخدام الفضة والذهب ولكل تيارات التفريغ ماعدا((〖 I〗_d=50 mA والذي يمثل اكبر معدل ارتفاع للحبيبة فيه باستخدام الذهب. واخيرا, ناتج عملية الترذيذ باستخدام الفضة اكبر مما عليه باستخدام الذهب. | In this work, a DC planner magnetron sputtering system used. Which consists of a cylindrical chamber, made from (Borosilicate). It contains two circular electrodes made from stainless steel. The cathode electrode is carried the target material and permanent magnet while a glass sample, which must coat, is placed on the anode electrode. In this works, gold and silver used as a target materials. The objective of this study is to examine the effects of operating parameters such as, electrodes separation, sputtering current, and type of target materials on the properties of glass surface coated under the influence of magnetic field. The surface morphology for the coated samples are studied by atomic force microscopy (AFM). Furthermore, electron temperature, ion and electron densities and other plasma parameters are determined by a cylindrical single Langmuir probe where the pressure up to(0.2 mbar). It is found that a linear increase in electron and ion densities and an exponential decrease in electron temperature with five values of electrodes separation (3,4,4.5,5 and 6) cm. That was observed for gold and silver target materials. Also, the discharge voltage using gold target is greater than that for silver target. Electron temperature decreased for gold and silver targets as the electrodes separation increased. The ion density increased which caused increasing in average grain diameter, height at sputtering current, Id=30 mA , when the target is gold. However, the average grain diameter is decreased and the height of grain increased at Id=40 mA using silver target. On the other hand, the values of electron temperature using silver target is greater than that for gold target. Also, the relation of average grain diameter, height and roughness surface as a function of electrodes separation are nonlinear. The minimum average values of grain diameter, height are (90 nm) and (6 nm) respectively for using gold at Id =30 mA and d=4 cm. For using silver at Id =40 mA the minimum average grain diameter is also (90 nm) at d=5 cm and height is (5.5 nm) at d=4 cm. For all discharge currents (20,30,40,50 3and 60 )mA , the minimum average grain height at the same electrodes separation d=4 cm for using silver and gold target except the value of Id=50 mA, whom a maximum average grain height is obtained. Finally, the sputtering yield for silver target is greater than that for gold target

تقييم السطح البيني لمنطقة الربط الكرافيت بالمعدن == Evaluation of the Intermediate Layer of Graphite Bonded Metal

اسم المؤلف: مريم بديع عبود
اسم المشرف: ثامر عبد الجبار جمعة
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: This work investigates the joining between graphite and stainless steel grade (410), by using active filler metal paste. Brazing technique was chosen because it is efficient, verstile, fast and economical.These new phases considered enhancement the bonding strength of the assembly.

تصنيف الاداء الموجه وغير الموجه لصور الاقمار الاصطناعية == Supervised and Unsupervised Classification Performance Satellite Images

اسم المؤلف: حسن سالم عبد المجيد
اسم المشرف: ليث عبد العزيز العاني
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: One of the main purposes of remote sensing satellite images is to interpret the observed data and classify features. Satellite image classification plays a major role in the extraction and interpretation of valuable information from massive satellite images.The primary purpose of this research is to classify multi - spectral Thematic Mapper satellite images using supervised classification. Unsupervised (RGB color model) and supervised classification (maximum likelihood method) is adopted to achieve the classification purpose. The classification accuracy depends upon the selection accuracy of the training area.PCA Transform is adopted and applied on the original bands to create the principal component images. The first three principle component image contains most the information in all the original bands. For this purpose the first three principle component images are chosen as RGB images to create a colored image.This colored image has been employed for determining and selecting the training areas which are very important for supervised classification after applying histogram equalization enhancement method on the colored image to make the selection of the training area more clarity and accuracy. After that the selection of the training areas is ready as an input for the supervised classification.Our results showed that the image with higher variance value doesn't represent a prerequisite in image clarity. The variance with mean value may reflect the quality of the image. The variance and means look like the torque in physics. So that we can see that the image with low variance and mean value near the middle of the dynamic range value has more quality than the image with high variance and mean value near the edge of the minimum or maximum value. Improve the selection of the training area (region of interest) visually plays an essential role in increasing the accuracy of supervised classification and this reflects on the calculation of the area for each class in the scene. In the present work, the overall accuracy increased from 68.5% to 98.9%after adopting the histogram equalization technique as an enhancement technique in improving the selecting the training area visually.Although a high classification accuracy with principal component image, but still the classification process with original bands is better because its values represent the real spectral reflectance. The result of classification accuracy with the original bands is enhanced from 68.5% to 97.08% and became very comparable with the result of classification accuracy with the principal component images 98.86% when the selection of the training area (region of interest) has been improved visually.In this thesis, the ENVI (Environment for Visualizin Images) software version 4.5 has been used to achieve the aim of this study.

تحضير مادة طلاء من فررايت الليثيوم - النيكل بالتعويض المتكافئ == Preparation of Painting Material from Li - Ni Ferrite with Isovalent Substitution

اسم المؤلف: صادق هاني لفتة مخلص السراجي
اسم المشرف: عماد خضير عباس | علي مطشر موسى
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: حضر فيرايت الليثيوم - نيكل النانوي ذو التركيب Li0.5 - 0.5xNixFe2. - 0.5xO4 بطريقة الهايدروحرارية وبمجموعتين من كلوريدات المعادن وكبريتات الحديدوز وهيدروكسيد الصوديوم. كل مجموعة تتصمن تغيير x بالقبم 0.1 و0.3 وحتى 1.0. المجموعة واحد بدون Fe2+ والمجموعة اثنين مع اضافة Fe2+ . النسبة Fe3+/ Fe2+ ابقيت ثابتة بمقدار 1.7، درجة حرارة التحضير كانت 155oC والدالة الحامضية مساوية لقيمة 11. كل التراكيب حضرت باستثناء المركب عند x=0 بدون اضافة Fe2+ والتي لم يتمكن من تحضيرها بهذه الطريقة تحت الظروف التجريبية المستخدمة. اظهرت النماذج سيادة طور سبنل فيررات بعد x=0.3 للمجموعة واحد وطور نقي عند x=0.3 باستخدام Fe2+ . ثابت الشبيكة للمجموعة اثنين اقل مما للمجموعة واحد. الحجم البلوري يصل لادنى قيمة عند x=0.5 للمجموعة واحد وتقريبا اعظم ما يمكن للمجموعة اثنين عند x=0. قمم اطياف تحت الحمراء لرباعي السطوح تزاح نحو الترددات الاعلى مع زيادة تركيز Ni2+. اشكال الجسيمات كانت : قضبان (غالبا للهمتايت) بمعدل قطر 40nm، وكروية(اصلها مكعبات فيرايت نانوية) بحجم حوالي 20nm. حلقات M - H امتلكت شكل الحرف S مماثلة للتي للسوبربارامغناطيسية. عموما فالنماذج المحضرة تمتلك اقل قاهرية (coercivity)، واعلى تمغنط اشباع (saturation magnetization) من الادبيات المنشورة. كلا المجموعتين امتلكت اعلى تاثرية عند x=0.5. وقد فسرت هذه النتائج على اساس التركيب وتوزيع الايونات الموجبة والتفاعل بينها وحجم الجسيمات. الامتصاص الرنيني للاشعة المايكروية باستخدام اختبار FMR اظهر ان القيمة الاعظم للتاثرية الخيالية χ″ هي عند x=0.5 للمجموعة وقيم عليا عند x=0.7 وx=0.9، واكبر عرض خط حوالي 950G عند x=0.7 . المجموعة الثانية اظهرت اعظم امتصاص(χ″) وعرض خط عندx=0.9 . بعدها تم الخلط مع ايبوكسي النوفالاك بنسبة وزنية 39.7 %. اختبار دائرة القصر - لقياس الرنين المغناطيسي بانعدام المجال قد اظهرت امتصاص للاشعة المايكروية لترددات اكبر من 19GHz. تفسير ان نماذج المجموعة اثنين تمتلك امتصاص اكبر من المجموعة واحد اعتمد على الموصلية التنقلية hopping وعلى تغير المعلمات المغناطيسية ( MsوHc). طريقة خط النفاذ باستخدام VNA في الحزمة - X والحزمة - Ku اظهرت ان خسائر العودة او الانعكاسRL تكون اقل ما يمكن عند x=0.3 للمجموعة واحد في الحزمة - X بينما ذلك عند x=0.3 وx=0.5 للمجموعة اثنين. اضافة Fe2+ يقلل القيمة الدنيا بعامل اكبر من 1.5. خسائر الادراج IL في الحزمة - X تتراوح بين - 4.5dB الى - 7dB . ان RL وIL في الحزمة - Ku تمتلك سلوك متشابه ولكن قيمها اقل. ان RL تصبح اقل ما يمكن عند x=0.5 وبقيمة - 18dB بينما كانت حوالي - 12dB باضافة Fe2+ . ومعدل قيمة IL في حزمة - Ku هي - 6dB. يلخص تاثير السمك بتحسين قيم RL وIL ولكن مع ازاحة القمم الدنــيا الى تــردد اقـل. ســمك بـمقدار 2mm يمـتلك RL< - 27dB وIL< - 19dB. | Nano Li - Ni ferrite samples having the structure Li0.5 - 0.5xNixFe2. - 0.5xO4 were prepared by hydrothermal method in two sets from metal chlorides, ferrous sulfate and NaOH. Each set implicated varying x through 0, 0.1, 0.3 to 1.0. The samples were without and with adding Fe2+. The ratio of Fe3+/ Fe2+ was kept at 1.7. The preparation temperature was 155 °C and pH was equal to 11. All composition was prepared except that for x=0 without Fe2+ which cannot be prepared under used experimental conditions. Samples showed dominant spinel ferrite phase beyond x=0.3 for set one and pure phase at x=0.3 with Fe2+ addition. Lattice constant of set two is slightly lower than set one and both are slightly lower than theoretical values. The crystallite size gets minimum at x=0.5 for set one and roughly maximum at x=0 for set two. Fourier Transformation Infrared (FTIR) spectrums tetrahedral showed peak shift to higher frequency with increasing Ni2+ concentration. Particles shapes were : rods (often hematite) average diameter 40 nm, spherical (nanocube ferrite in origin) sizing around 20nm. Hysteresis Loops have S - shape like to superparamagnetic one. Generally the prepared samples have lower coercivety Hc, higher saturation magnetization Ms compared to these in literatures. Both sets give maximum susceptibility at x=0.5. These results are explained based on composition, cations distribution, cation interactions and particle size. Resonance microwave absorption by using Ferromagnetic Resonance (FMR) test showed that the maximum imaginary susceptibility χ″ is at x=0.5 for set one besides high values of 0.7 and 0.9, with largest linewidth of about 950 G at x=0.7. Set two showed max absorption (χ″) and linewidth at x=0.9. Powders were then mixed with Novalac epoxy by 39.7 %wt. Shortcut - FMR test with no field showed that high absorption to microwave field for frequencies larger than 19 GHz. The explanation of that set two samples have larger absorption than set one is based on hopping conductivity and magnetic parameters (Ms and Hc) variation. Transmission line method by using vector network analyzer in X - band and Ku - band showed that return (reflection) loss RL got minimum at x=0.3 in for set one in X - band whereas that happen at x=0.3 and x=0.5 for set two. Adding Fe2+ lowered the minimum by a factor of more than 1.5. The insertion losses IL in X - band ranging from - 4.5 to - 7 dB. RL and IL in Ku - band have same behavior but their values are lower. RL got minimum at x=0.5 with value of about near to - 18dB whereas it was around - 12dB by adding Fe2+. Average IL in Ku - band - 6dB. Thickness effect is abstracted by enhancing RL and IL but shifting the minimum of peaks to lower frequency. 2mm thick has RL< - 27dB and IL< - 19dB.

الحالات الكمية المتشاكهة المشوهة وبعض تطبيقاتها == q - Deformed Quantum Coherent States and Some of Their Applications

اسم المؤلف: احمد شاكر محمود ياس
اسم المشرف: محمد عبد الزهرة حبيب
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The concept of q - deformation has found many important applications in a variety of fields in physics, such as quantum optics, atomic physics, solid state physics, nuclear physics and cosmology. This has motivated its extension to many well - established other concepts such as coherent states well - known in quantum optics. On the other hand, the interpretation of the physical meaning of the q - deformation remains an outstanding problem.The present work is an attempt to apply the concept of q - deformed coherent states to solve this interpretation problem. The q - deformed 1 - D quantum harmonic oscillator is used as a model for the application of the methodology of using q - deformed coherent states to solve this problem. This is achieved by first deriving the classical Liouville equation for the q - deformed 1 - D classical harmonic oscillator in the undeformed and deformed oscillator phase spaces. Then, this equation is solved by using the method of characteristics which gives the classical probability distribution function for this oscillator in phase space. The behavior of this function is then investigated by using a computer visualization method based on a computer program constructed in Mathematica® language.On the quantum level, the Heisenberg equation of motion for the density operator corresponding to this 1 - D quantum harmonic oscillator is expressed in the present work in terms of the standard quasiprobability distribution functions, again in the deformed and undeformed phase spaces. This helps to derive the quantum Liouville equations for this q - deformed oscillator in these phase spaces. The classical limits of these resulting Liouville equations are then approached by extending a standard procedure based on the non - deformed coherent states to the q - deformed case. In addition to the application of the standard q - deformed coherent states, a novel approach based on q - deformed coherent states due to Arik and Coon is also employed in this investigation.The results of detailed mathematical derivations in this process of approaching the classical limit reveal that this limit is statistical in nature. This is similar to the case of the ordinary undeformed oscillator which has been proved previously.They also reveal, together with the complementary computer visualizations, more information about the physical meaning of the q - deformation. This includes the observations that the q - deformed 1 - D oscillator can be interpreted as a nonlinear oscillator where the nonlinearity parameter depends on . Also, the behavior of the classical limits of the quantum Liouville equations for this oscillator is observed to show whorl shapes that can be contrasted with their classical analogs.This whorl shape behavior can be considered as a phenomenon connected with q - deformation in general; the anharmonic oscillator being a special case.Some connection with phase space having a non - commutative geometry, resulting from q - deformation, also finds evidence in some of the results presented in this thesis.

التقنين الاشعاعي البيئي للمياه الجوفية في غرب محافظة البصرة باستخدام تقنية التالق الحراري == Environmental Radiation Dosimetry of Groundwater in West of Basra Governorate using Thermoluminescence Technique

اسم المؤلف: سيف قاسم هلال
اسم المشرف: رياض جاسب ابو الهيل
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
الجامعة: جامعة البصرة
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: This study includes calculation the dose rate of emitted gamma - rays from groundwater taken from different locations in the Basra govemorate by use of thermoluminescence technique . it emphasis on the the characteristics of TL - reader ,TL - dosimeter (calcium fluoride) to know the suitability of these systems for environmental monitoring. It is found that the zero dose reading for calcium fluoride is 0.18 m rad .It is also found that most dosimeters of the same materials have nearly equal sensitivities and that all thebatches have high uniformity which makes them capable for environmental use. Experimental observations have indicated that there is linear relation between response and dose for the material which qualifies it for measuring doses within the low dose range. The variations in the response of the TL - reader using internal light source have also been investigated ,it is found that TL - reader has high stability .The fading in a environmental field for calcium fluoride is 7% in one month.Making sure that these systems are suitable for environmental monitoring programing ,calcium fluoride has been used for measuring gamma - rays emitting from natural background radiation ,it is foundthat the natural dose rate of gamma - rays emitted from the locations : Albrjisiya, khor aizubair, Safwan, Jabal Sanam, Um Qasr, Um Eanij and Al - lahees are (5.80,6.41, 5.32, 5.25,5.26,4.60 and 4.86) μrad/h receptivity . Thus, the dose rate of radiation emitted From ground water of province of Basra is 5.35 μ rad/h . the results proved that the inhabited area ling within the environmental monitoring satiations are the area in which the radiation is natural and that the rate that the human being exposed equal 11.5μrad/h which considered naturalexposure limit.

تحضير وتشخيص بعض البلورات السائلة وخلائطها الثنائية البلورية السائلة ودراسة بعض خواصها الفيزيائية == Preparation & Characterization of some liquid crystals and Binary liquid crystalline mixtures and study some of their physical properties

اسم المؤلف: زينب نديم مطشر
اسم المشرف: اياد جاسم الحجاج
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: study included as a first step the preparation of compound 4 - heptyloxy benzaldehyde and derivatives by linking alkoxy series with the aldehyde, and in the second step was to prepare Schiff base compounds through interaction of equal moles of the compound 4 - heptyloxy benzaldehyde with some primary amines with different polar groups, and in the third stage was to prepare mixtures from the Schiff base compounds resulting from the second step,and we obtained five liquid crystalline mixtures at low temperatures and some of them close to room temperature, and then the chemical structures was chacterized and the absorption bands for functional groups was given by FTIR spectroscopy scan . A microscope with polarized light (POM) and a differential scaning calorimeter (DSC) was also used to study the liquid crystalline phases for individual compounds, as well as binary liquid crystalline mixtures and then a discussion of changes taking place at phase transition temperatures for individual liquid crystalline compounds as well as their binary mixtures , as characterized by these mixtures it owns a wide range of temperatures and some are close to room temperature ranging between (22.1 - 53.1 ℃). we has been studying some of the physical properties of these mixtures and compare them with the pure liquid crystals to see what has been achieved to improve these properties by studying the electrical properties (conductivity and dielectric ), as well as the activation energy , we has also been studying the photoelectric effect and determine the threshold voltage in the cases of parallel and vertical alignments , and the study shown a variation in the dielectric behaviour of binary liquid crystalline mixtures of remarkable increase compared to individual liquid crystalline compounds either the positive or negative dielectricanisotropy , ranging from ( - 1.320 - 2.234), while the variation in the electrical conductivity of binary mixtures of liquid crystal range (0.138 - 0.351 (ohm.m) - 1, and finally studied photoelectric effects for individual liquid crystalline compounds, as well as binary liquid crystal mixtures show that liquid crystalline mixtures have seen a clear decline in the threshold voltages (1.3 - 3.9Volt

دراسة نظرية لانتشار نبضة كاوسية في الياف البلورة الفوتونية والعوامل المؤثرة فيها == Theoretical Study of the Propagation Gaussain Pulse in Photonic Crystal Fibers and the Parameters Influencing it

اسم المؤلف: دعاء حسين هاشم
اسم المشرف: حسن عبد الله سلطان
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
الجامعة: جامعة البصرة
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: In this thesis the propagation of short Gaussian pulse in Photonic Crystal Fibers (PCFs) are studied, the effect of the fiber parameters on the pulse like the absorption, dispersion and nonlinearity studied also.Nonlinear Schrodinger Equation (NLSE) was solved numerically using the spectral or Split - Step Fourier Method (SSFM) to determine the pulse spatio - temporal evolution.The study includes the effect of the photonic crystal arrangement especially the holes number, hole - hole spacing and holes dimeter on the effective refractive index and the dispersion of the photonic crystal fiber.The Nonlinear Schrodinger Equation (NLSE) was solved using the Finite differences in the frequency domain (FDFD) method.The two zeros dispersion were studied to calculate the zero dispersion wavelength (ZDW) by applying the international golden ratio (1.16180339887) for the ratio of the hole - hole spacing to the holes dimeters.The study shows that the pulse propagation depends strongly on the absorption, dispersion and nonlinearity of the PCF, and the pulse wavelength must be near the ZDW to ensure the propagation with little loses.The dependence of the nonlinear refractive index, the dispersion and the ZDW of the PCF were proved.The study shows that the golden ratio can be used to have two ZDWs, and a new ratio of hole - hole spacing to the hole dimeter equal to 2 can be used to achieve two ZDWs.

دراسة نظرية للتركيب الالكتروني الحجمي والسطحي لسبيكة نصف هيوسلر FeCrSe والحد الفاصل (111) FeCrSe/GaP == Theoretical Study of the Bulk and Surface Electronic Structure of the Half Heusler Alloy FeCrSe and the Interface of FeCrSe/GaP(111

اسم المؤلف: مظاهر حبيب جولان الاسدي
اسم المشرف: Mudhahir H. Jolan
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
الجامعة: جامعة البصرة
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: قدمنا في هذه الدراسة ايضاحات مهمة حول الخواص المغناطيسية والتركيب الالكتروني في سبيكة نصف هيوسلر FeCrSe. وقد بينت النتائج ان FeCrSe هي مادة فيرومغناطيسية نصف معدنية عند ثابت الشبيكة المتوازن هو 5.506Å، وان العزم المغناطيسي الكلي المحسوب هو 2μB يخضع تماما لقواعد سليتر - بولنك. بالاضافة الى ذلك، بحثنا على نطاق واسع الخواص الالكترونية والمغناطيسية والنصف معدنية للسطوح (001) و(111) لسبيكة نصف هيوسلر FeCrSe والحد الفاصل مع القاعدة GaP (111) باستعمال حسابات المبادئ الاولية ضمن نظرية الكثافة الدالية. وتوضح كثافة الحالات الذرية ان الصفة النصف معدنية المثبتة في الحجم FeCrSe تكون محفوظة عند السطح (001) المنتهي بـ CrSe - والسطح (111) المنتهي بـ Se - ، ولكنها فقدت عند السطوح (111) المنتهية بـ Fe - وCr - والسطح (001) المنتهي بـ Fe - . علاوة على ذلك، للحد الفاصل FeCrSe/GaP (111)، تكون الصفة النصف معدنية للحجم محطمة عند الهيئة Se - P بينما يبين الحد الفاصل والحد الثانوي الفاصل Se - Ga تقريبا استقطاب برم 100%. ضمن هذه الدراسة اوضحنا، من حسابات طاقات التلاصق (γ) للحد الفاصل ان الشكل او الهيئة Se - Ga هو اكثر استقرارا من الاخر Se - P. وايضا درسنا العزوم المغناطيسية، فلاحظنزايادة العزوم المغناطيسية المحسوبة لـ Se وGa عند الحد الفاصل Se - Ga (111) وP عند الحد الفاصل Se - P (111) مقابل قيم الحجم المناظرة لها بينما العزم المغناطيسي الذري لذرة Se عند الحد الفاصل Se - P (111) يقل. ونلاحظ ايضا ان العزوم المغناطيسية للحد الفاصل الثانوي لذرة Fe عند كلا السطحين الفاصلين Se - Ga (111) وSe - P (111) تقل مقارنة بقيم الحجم. | In this study, important illustrations about the electronic structures and the magnetic properties of half - Heusler alloy FeCrSe.The results show that FeCrSe is half - metallic ferromagnet at equilibrium lattice constant (5.506 Å). The calculated total magnetic moment of 2.00 μB follows quite well the Slater - Pauling rule . We investigate extensively the electronic, magnetic, and half - metallic properties of the half - Heusler alloy FeCrSe (111) and (001) surfaces and the interface with GaP (111) substrate by using the first - principles calculations within the density functional theory. The atomic density of states demonstrates that the half - metallicity verified in the bulk FeCrSe is maintained at the CrSe - terminated (001) and Se - terminated (111) surfaces, but it is lost at both Cr - and Fe - terminated (111) surfaces and the Fe - terminated (001) surface. Furthermore, for the interface of FeCrSe/GaP (111), the bulk half - metallicity is destroyed at Se - P configuration while Se - Ga interface and subinterface show nearly 100% spin polarization. We explained within this study, the calculated interfacial adhesion energies exhibit that Se - Ga shape is more stable than the Se - P one. We also studied the magnetic moments, The calculated magnetic moments of Se, Ga at the Se - Ga (111) interface and P at the Se - P (111) interface increase with respect to the corresponding bulk values while the atomic magnetic moment of Se atom at the Se - P (111) interface decreases. We also notice that the magnetic moments of subinterface Fe at both Se - Ga and Se - P (111) interfaces decrease compared to the bulk values.

دراسة نظرية لفحص نقل الالكترون خلال نقطتين كميتن مقترنتين == Theoretical Study to Investigate the Electron Transport Through Double Coupled Quantum Dots

اسم المؤلف: محمد عبد الزهرة نجدي
اسم المشرف: هيفاء عبد النبي جاسم
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: In this study, a model calculation is introduced for the electron transportthrough a system consists of two quantum dots coupled serially, embeddedbetween two nonmagnetic leads (source and drain), due to the importance ofthis kind of systems in many academic and experimental applications.In our treatment, the time independent Anderson - Newns Hamiltonian modelis considered as a basis to study the system dynamics and then to derive spindependentanalytical formula to calculate the occupation numbers of thequantum dots energy levels, the corresponding quantum dots energy levelsand the molecular virtual energy levels, as a function of bias voltage .These relations are solved self - consistently, which are all employed tocalculate the tunneling current. The differential conductance is calculatednumerically by using finite differences method.And as the efficiency of electron transport through coupled quantum dotsdepends on the system parameters such as the energy levels position of eachquantum dot, the Coulomb repulsion energy on each quantum dot, theeffective exchange energy, the tunneling coupling between the dots and leadsand the coupling energy between the two quantum dots, all these parametersare studied and investigated in details and the role of all these parameters inthe tunneling current and the differential conductance calculations ispresented. also our treatment is applied to two kinds of systems, when thequantum dots are symmetric and when they are asymmetric depending on ourchoice for the over mentioned parameters. Our treatment is utilized to studythe following : 1 - - - Two regimes are studied, the first is the strong coupling regime and thesecond is the weak coupling regime.2 - - - The role of the spin exchange interaction in determining the type ofinteraction (if it is attractive or repulsive) between the quantum dots.3 - - - The role of the spin exchange interaction between the quantum dots indetermining the coulomb blockade in the strong coupling regime.And according to our calculations, we conclude that at the strong couplingand when neglecting the effective exchange interaction, one can determinethe bias voltage values that correspond to the maximum values of thedifferential conductance which is equal to the value of the couplinginteraction between the quantum dots. And the maximum and minimumvalues in the differential conductance curve are changed when the quantumdots energy levels are lying below the energy reference. Also, ourcalculations that concern to the effective exchange interaction make it sure that our results can be utilized to study the electronics that related to the coupled quantum dots. Our calculations that related to the Coulomb blockade make it sure that one can use the quantum dots molecule as an electronic switch. Our calculations that concern to the gate voltage effect investigation in the case of equilibrium can be employed in the detection about the type of coupling with the environmental which effects directly in determining the rates of electron tunneling from the left lead to the active region and then to the right lead.

تحضير اغشية رقيقة من اوكسيد الخارصين ZnO النقي والمشوب بالالمنيوم باستخدام تقنية المحلول ودراسة خواصها البصرية (Sol - Gel) الغروي وتطبيقها كمتحسس غازي == Preparation of Pure and Doped with Aluminum Zinc Oxide (ZnO) Thin Films by Using (Sol - Gel)Technique and the Study of Optical Properties and Applications as A Gas Sensor

اسم المؤلف: سعد عبد الله جبر الفاضلي
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
الجامعة: جامعة البصرة
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: In this study, Zinc Oxide (ZnO) thin films are prepared by using Sol - Gel technique . The samples are prepared with different thicknesses (58,69,77)nm . Different weight ratio of Aqueous aluminum chloride (AlCl3.6H2O) are added to the Sol - Gel ZnOwith percentage (0.345%, 0.824% , 1.703% and 2.146%). These solutions are deposited by using spin coating on glass substrate .In order to investigate the sensitivity and the response of these samples for the detection about different vapors and gases (ethanol , methanol , acetone and nitrogen ) , pure and (AlCl3.6H2O) doped ZnO films are prepared by using the same technique but by adding Aluminum electrodes on these films with dimensions (2.5x0.5)cm2 .This preparing is followed by thermal treatment for these films by using oven with temperature reaches to 450 oC.The structure properties of these films are studied by using X - ray diffraction (XRD) and the results show that these films are polycrystalline and the calculated lattice constant are close to the standard values . The samples are analyses by Field Emission Scanning Electron Microscopic (FESEM) and the results show that the grain arrangement are regular and these structures are packed and the grain shape is as spherical . But for the AZO films , we notice that the increasing of the doping percentage reduces the gra in size .We also study the optical properties of these films such as Absorption (A) , Transmission (T) , Reflection (R) , Absorption coefficient (α) , extinction coefficient (k) , the energy gap(Eg) , refractive index (n) , with its complex and real dielectric constant( ) , dissipation factor (tanδ) , Optical Dispersion Parameters (Eo , Ed) and optical conductivity ( ) . The effect of the films thickness on the optical properties of the ZnO films for the over mentioned parameters . The results we get are discussed and compared with other studies . This work elucidates and analyzes the studying of the effect of adding (AlCl3 . 6H2O) o Zinc Oxide (ZnO) and the results are with standards agree with the results of many other researchers . The optical constant are tabulated and compared with , the results of other . And in order to determine the electronic transitions type , Absorption coefficient is calculated and it shows that ZnO and AZO films have transition of direct type because the values of α > 104 . The energy gap of the ZnO films with different thickness (58,69 and 77) nm is calculated , since it is found that the increasing of the film thickness gives slight increasing in the energy gap . The experimental results show that the increasing of doping percentagein ZnO film increases the energy gap with very little amount . In the electronic application field , the study also included design and fabrication of gas sensor system from local materials , which contain of chamber that made of plates polymer that contain of base for install the sample , electrodes to link the sample the measurement circuit , glass flask with three holes , heater , N2 gas cylinder , glass tubes , valves and the measurement circuit electric .The study also includes the ability of responding of the films for the thicknesses (58 , 69 and 77 )nm , to these gases , and it is found that the highest response was at vapor ethanol at the thickness 58nm. The effect of chloride Aluminum on the response of these percentage (0.345% , 0.824% , 1.703% , 2.146%) is studied for the mentioned gases , and it is found that the highest response we get is 45% at the concentration 2.146% for methanol gas . The results are tabulated , discussed and compared with precedent studies.

دراسة حركيات ليزر النقطة الكمية بوجود البرم == Study of Dynamics of Quantum Dot Laser with Spin

اسم المؤلف: حكمت عبد الحسين ابراهيم
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
الجامعة: جامعة البصرة
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: The dynamics of VCSE QD spin polarized laser is studied based on asix equations model that takes into account the effect of number ofcontrol parameters on populations in the wetting layer for bothpolarized components and those in the quantum dot .The carrier density in the wetting layer and the quantum dot vary indifferent manner although the former lends to the later . Also thedynamics of carriers in the quantum dot shows varieties of dynamicsthat range from simple to complex one while the dynamics of carriersin the wetting layer are always simple .The polarized field related to the spin up and spin down cases sufferseffects in different manners due to the variations of these controlparameters . the intensities of both two polarized components behavioralso range from simple and end up chaotically.It appears that output ellipticity can be used as a new tool to assess the dynamical state of the laser wither it in stable , periodic , aperiodic or chaotic .The modulation of the injection current for both components or for either one led to new dynamics , the system was not able to show when it work autonomously although the model has five degrees of freedom .

دراسة تركيز البورون في مياه محافظة ذي قار وتربتها باستخدام طريقة الكارمين وجهاز اللوفي بوند == Study of Boron Concentration in Water of Thi - Qar Governorate and Soil Using Carmine Method and Lovibond Device

اسم المؤلف: تغريد عبد الحسين شاكر
اسم المشرف: ثائر منشد سلمان
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: In this study , we measured the boron concentration in the water and soil of Thi - Qar Governorates, where were collected (45) Sample Water also were collected (66) Sample soil from the districts of Thi - Qar and its environs province of southern Iraq , and we used that analogy chromatography Al carmine method (colorimetric carmine method) . we got the highest concentration of boron (0.801 ppm) in Garmat Bani Said area - Al Greej and the lowest value for the concentration of boron measured Al carmine manner of samples of clay in said Dhkeel - Al Ibrahim (2) area (0.368 ppm) . The concentration of boron has been in samples of mud rate in the province of Thi Qar was (0.614 ppm) also were measured exponent pH and ranged results between (7.208 - 8.368 ) and an average of (7.890) . As well as we used measurement chromatography Al carmine to measure the boron concentration in water samples way . We got the highest value for the concentration of boron water sample (1.057 mg / L) in Garmat Bani Said area - center (1) and the lowestvalue for the concentration of boron measured Al carmine way in water samples in Al Fuhood zone - Amayreh(1) (0.251 mg / L) . Boron concentration of water samples in the province of Thi Qar rat was (0.592 mg / L) .The boron concentration of water samples located within the normal allowable ratio globally but some are relatively high . As well as the measured pH and the results were pH ranging between (7.435 - 8.277) and an overall average of (7.885) .It was also some water samples to measure the soil by a device (Spectro Direct Lovibond) we got the highest value for the concentration of boron in the water samples (1.4 mg / L) in Al Fuhood zone - Amayreh area (3) , and the lowest value for the concentration of boron in Al Nasiriya - Al shuhada zone (1) (0.4 mg / L) . The soil samples were measured by a device (Spectro Direct Lovibond) has the highest value for the concentration of boron we got them in Al Tar - Al hareb area (1.1 ppm) and the lowest value for the concentration of boron in Al Tar - Al Ebrat (0.2 ppm) .

تاثير امتزاز الغاز على التركيب الالكتروني لشرائط نانوية هجينة من السلسين - الجرافين باستعمال نظرية الكثافة الدالية == Effect of Gas Adsorption on the Electronic Structure of Silicene/Graphene hybrid Nanoribbons using Density Functional Theory

اسم المؤلف: علي صبحي جابر الخواجة
اسم المشرف: حمد رحمن جبر
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: تم استقصاء امتزاز مجموعة جزيئات غاز شائعة وهي CO وCO2 وNH3 وNO NO2 وSO2 على اشرطة نانوية مؤلفة من سلسين|جرافين ((SiGNRs باستعمال نظرية الكثافة الوظيفيةdensity functional theory (DFT) وبتقريب (PBE) Perdew, Burke, and Ernzerhof مع مجموعة الدوال الاساس 6 - 31G. اظهرت النتائج ان امتزاز جميع الغازات CO وCO2 وNH3 وNO وNO2 على الاشرطة النانوية للسلسين|جرافين هو امتزاز كيمائي قوي مع طاقات امتزاز اكبر من1eV ، ونتيجة للتفاعل القوي لهذه الغازات على الاشرطة النانوية للسلسين|جرافين فان هذه الاشرطة النانوية يمكن ان تستعمل كمحفز او منشط ، وبالتالي امكانية اقتراحها كمحفز خالية من المعادن، باستثناء الامتزازات الاتية : CO2 على الاشرطة النانوية للسلسين|جرافين المشابه للكرسي عند الموقع T1، وامتزاز NH3 وNO2 على SiGNR المشابه للكرسي عند الموقع T2، وامتزاز NO وNH3 على SiGNR ذو النوع المتعرج عند الموقع T2، وامتزاز NO2 على SiGNR ذو النوع المتعرج عند الموقع T1 وجميع امتزازات SO2 على SiGNRs فانها امتزازات فيزيائية ضعيفة وبطاقات امتزاز تتراوح ما بين0.045) eV الى(0.84 ، وهذا يدل على ان SiGNR يمكن ان يكون كمتحسس جيد لـ (,CO CO2، NH3, NO2 وSO2) عند المواقع المشار اليها. علاوة على ذلك، فان فجوة الطاقة للاشرطة النانوية للسلسين|جرافين عند امتزاز الغازات CO2 وCOو NH3 وNOو NO2 وSO2 تكون مفتوحة وبطرق مختلفة. بشكل عام، فان فجوة الطاقة لـSiGNR المشابه للكرسي اكبر من تلك التي لـ SiGNR ذو النوع المتعرج. وقد وجدنا ان SiGNR المشابه للكرسي والذي يمتز جزيئات الغاز لـ CO وCO2 وNH3 وSO2 عند الموقعT1 تكون قيمة جهد التاين والالفة الالكترونية له صغيرة بالمقارنة مع اشرطة السلسين|جرافين الاخرى، وهذا يدل على ان هذه الانظمة لديها القدرة على التبرع بالكترون، اي يحتاج الى طاقة صغيرة لازالة الكترون لتصبح ايونات موجبة.توضح النتائج ايضا على ان القيمة الاكبر لـ EHOMOلامتزاز NO وNO2 للنوع المتعرج لـ SiGNR عند الموقع T1 هي eV5.635 - وeV5.541 - على التوالي، وهذه القيم تظهر ميل الجزيئة للتبرع بالالكترونيات والقيمة الاصغر قيمة لـ ELUMO للنوع المتعرج لـ SiGNR عند الموقعT1 هي eV5.344 - و5.315 eV - ، وهذه القيم تظهر ميل الجزيئة الى تقبل الالكترونات | The adsorption of common gas molecules (CO, CO2, NH3, NO, NO2 and SO2) on silicene/graphene nanoribbons (SiGNRs) is investigated using density functional theory (DFT) with Perdew, Burke, and Ernzerhof (PBE) /6 - 31G basis set. The results show that all the adsorption of (CO, CO2, NH3, NO and NO2) on SiGNR is a strong chemisorption with adsorption energies being larger than 1eV, due to the strong interaction of (CO, CO2, NH3, NO and NO2) on SiGNR which could catalyse or activate, suggesting the possibility of SiGNR as a metal - free catalyst. Except the adsorption of CO2 on armchair SiGNR at site T1, NH3 and NO2 on armchair SiGNR at site T2, CO and NH3 on zigzag SiGNR at site T2, NO2 on zigzag SiGNR at site T1 and all adsorbed SO2 on SiGNRs are weak physisorption with Ea ranging from (0.045 to 0.84) eV, indicating that SiGNR could be a good (CO, CO2, NH3 NO2 and SO2) sensor at these sites. Moreover, the energy gap of SiGNR is opened upon adsorption of (CO, CO2, NH3, NO, NO2 and SO2) in various ways. In general, the energy gap for armchair SiGNR is larger than those of zigzag SiGNR. We found that the armchair SiGNR with CO, CO2, NH3 and SO2 gas molecule adsorption at site T1 has small value of ionization potential and electron affinity compared with other SiGNRs, this indicates that these systems have the ability to donate an electron; it needs a small energy to remove an electron to become cation. Our results indicate that larger values of EHOMO for adsorption NO and NO2 zigzag SiGNR at site T1 is ( - 5.635 and5.541 - ) eV, show that a propensity of the molecule to donate electrons and smaller value ELUMO for zigzag SiGNR at site T1 is ( - 5.344and - 5.315) eV, these values show that a propensity of the molecule to accepter electrons

تاثير جسيمات (BaTiO3) النانوية على الخصائص الكهرو بصرية للبوليمرات السائلة جانبية السلسلة == Effect of )BaTiO3) nanoparticle on Electro - Optical Properties of Side Chain Liquid crystal Polymers

اسم المؤلف: زهراء كاظم روضان المعموري
اسم المشرف: خالد حسن بدر العمار
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: درست في هذا البحث تاثير جسيمات تيتانات الباريوم BaTiO3 النانوية على الخصائص الكهرو - بصرية لمادة بوليميرية بلورية سائلة سايلوكسونية ذات سلسلة جانبية. استخدمت خمسة اوزان جزيئية مختلفة بالوزن الجزيئي تتراوح بين (1.7×〖10〗^6 - 3.1×〖10〗^3) وكانت نسبة المادة النانوية BaTiO3 المضافة (0.07) متساوية لجميع الاوزان الجزيئية ، ولوحظ ان الفولتية تزداد مع زيادة الوزن الجزيئي ، وعند اقل قيمة للشدة نحصل على فولتية التوجيه التام . كما وجد ان اضافة جسيمات BaTiO3 والتي كانت نسبتها متساوية لجميع الاوزان الجزيئية تؤدي الى زيادة كثافة المجموعة الميزوجينية المرتبطة بسلسلة البوليمر وهذا يؤدي الى زيادة اسهام عزم ثنائي القطب الكهربائي في مجموعة (C≡N) الموازية لمحور الجزيئة الطولي للوحدة الميزوجينية ، وكذلك يسهم في زيادة متباينة الخواص العزليةDielectric anisotropy ∆ ε وبالتالي نحصل على ازمان استجابة بصرية (τ_on) ،(τ_off) اقل ، وبذلك تتحسن الخواص الكهرو - بصرية للنظام . وقد قيست ازمان الاستجابة البصرية (τ_on) في حالة الفتح (عند تسليط مجال كهربائي ) وزمن الغلق(τ_0ff) (عند ازالة المجال الكهربائي) وذلك من خلال حساب الفترة الزمنية بين التصفيف الابتدائي والتصفيف الجديد للجزيئات الحاصل بفعل المجال الكهربائي المسلط من ملاحظة التغير في شدة ضوء الليزر اثناء مروره بالخلية الكهروبصرية . ان الفولتية اللازمة لاحداث توجيه تام في جزيئات المادة البلورية السائلة البوليمرية قد حسب لكل البوليمرات المستخدمة ووجد انها تزداد مع زيادة الوزن الجزيئي . وتم قياس التغير في فولتية العتبة عند خطوات ثابتة وتحت درجات الانتقال الطوري TNI لسلسلة من البوليمرات وجد ان الاوزان الجزيئية العالية للبوليمرات تمتلك فولتية عتبة كبيرة وان هذا له علاقة بثابت مرونة النظام . كما وجد ان ازمان الفتح تزداد(τ_on) تزداد عند زيادة الوزن الجزيئي وذلك بسبب زيادة اللزوجة ، وكذلك (τ_on) هو دالة الفرق بين درجة الحرارة المقاسة ودرجة حرارة الانتقال الزجاجي ، وكذلك فان ازمان الغلق (τ_0ff) هي الاخرى تعتمد على درجة الحرارة وهي دالة الى اللزوجة . وقد استخدمت قياسات مطياف الاشعة تحت الحمراء ، وذلك لتحديد معامل الترتيب التوجيهي للبلورات السائلة ذات السلسلة الجانبية وبتحديد اهتزاز حزمة معينة (C≡N) لطيف الامتصاص فقد وجد ان معامل الترتيب التوجيهي يعتمد على درجة الحرارة مع مختلف الاوزان الجزيئية . | In this research study the effect of BaTiO3 nanoparticles on electro - optical properties of liquid crystalline polymers with side chain. Used five different molecular weights of molecular weight ranging from (1.7×〖10〗^6 - 3.1×〖10〗^3)and the percentage of material nanoparticles BaTiO3 added (0.07) equal to all molecular weights, it has been noted that the voltages increase with increasing molecular weight, and when less the value of the intensity we get the operating voltage . . Measured the optic response times (τ_on) when current is switched on (under the electric field) and has also been measured when the electric current is switched off (τ_0ff) (the electrical field is removed), by calculating the time period between the primary layering and new layering molecules which happens under the effect of the electrical field and this period has been measured through calculating the laser light Intensity passing through the cell. The voltages have been needed to bring about a complete guide in the article of liquid crystalline polymer particles may as each polymer used and found to increase with increasing molecular weigh. It has been measured by the change in the threshold voltage when steady steps and under phase transition degree TNI series of polymers found that high molecular weight polymers possess significant threshold voltage, and this has to do flexibility constant of the system . . The response times(τ_on) also found increases with increasing molecular weight due to increased viscosity, meaning that (τ_on) is a function of the degree of difference between the measured temperature and the glass transition temperature. Also, it has been found that switch off times (τ_0ff) the other depends on the temperature which is a function to viscosity . Spectrometer was used infrared measurements to determine the orientational Order Parameters ( )for liquid crystals with a side chain and determining the vibration specific package (C≡N) of the absorption spectrum has been found that the orientational order parameters ( ) depends on the temperature with different molecular weights. It has been found that the addition of BaTiO3 particles lead to increased group density mesogen associated with a series polymer, and this leads to increase the contribution by permanent polar moment in Syano group parallel to the axis of the molecule longitudinal unit mesogen, as well as contributing to the anisotropic increase dielectric anisotropic Δε and thuwe get the responding times ( τ_on), (τ_off) less and thus improve properties electro - optical system.

تشخيص تصلب الشرايين باستخدام معالجة الصور الرقمية == The Diagnosis of Atherosclerosis Using Digital Image Processing

اسم المؤلف: عبد الكريم صكر كمر
اسم المشرف: حازم باقر طاهر العلي
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: ذي قار
الصفحات الاولى:
المستخلص: Accelerating the pace of scientific progress and that focus in the field of human service requirements is to provide daily health and service. Health aspect is one of the most important themes of science that needs to be searched because it has a direct impact on human existence. Medical Physics is one of the branches of the Physics Department that deals with the interest of providing theoretical or scientific foundations which had the aims to provide scientific services in the medical field. The subject of the medical image processing is one of the applications of this section. It aims to increase the efficiency of medical diagnostic systems to provide an integrated diagnostic system that works to distinguish a heart disease and atherosclerosis.This study depends on medical images that were obtained from patients in Nasiriyah Heart Center. Where thesis focus on images for arteries feeding heart muscle for Infected patients and other healthy. Set of operations were performed on these images derived from work areas and the separation arteries of these areas from the rest of unimportant information within the image To be brought into the neural network, the use of 110 image to train the network 60 and 50 were used for the test.The next step is to count the number of qualities for each image after it has been extracted artery of the image by making some operations on this image .The proposed system has proven successful in the conduct of the diagnostic process through the results obtained on the ratio of 100% in the training phase and 92% in the testing phase

دراسة الخواص التركيبية، الالكترونية والطيفية لشرائط الكرافين النانوية == Study of the Structural, Electronic and Spectroscopic Properties of Graphene NanoRibbons

اسم المؤلف: ايات عبد السادة يوسف طعيمه
اسم المشرف: حامد ابراهيم عبود محمد التميمي | رباب سعدون عبدون
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: تركز هذه الرسالة على معالجة الميكانيك الكمي للخواص التركيبية والالكترونية لشرائط الكرافين النانوية. تم استعمال نظرية دالية الكثافة مع الدالة الهجينة لي - يانغ - بار ذات المعاملات الثلاث والدوال الاساس 6 - 31G لتخمين التراكيب المقسمة الى اربع مجاميع وهي شرائط الكرافين النانوية النقية كمجموعة اولى وثانية، شرائط فلور - وكلور - كرافين النانوية كمجموعة ثالثة، وشرائط اوكسيد الكرافين النانوية كمجموعة رابعة. تشتمل الحسابات على معرفة تاثيرات عرض الشرائط النانوية واضافة ذرات مختلفة على الخواص التركيبية والالكترونية لشريط الكرافين النانوي. تم تصميم التراكيب المدروسة باستعمال برنامج Nanotube Modular وتطبيق حسابات نظرية دالية الكثافة باستعمال برنامج Gaussian 09 . ان الحسابات التخمينية للتراكيب النانوية تعتبر اداة مفيدة لتخمين الخواص التركيبية والالكترونية لهذه التراكيب قبل تحضيرها ودراستها مختبريا. تتضمن الخواص التركيبية المحسوبة كل من المعاملات الهندسية للتراكيب والاحداثيات القياسية لجميع الذرات في كل تركيب. وتتضمن الخواص الالكترونية كل من الطاقة الكلية، الحالات الالكترونية (طاقات المستوي الجزيئي العلوي المشغول والمستوي الجزيئي السفلي الفارغ)، فجوة الطاقة، بعض المتغيرات الالكترونية، الكثافة الالكترونية الكلية، الجهد الكهروستاتيكي، كثافة الحالات، عزم ثنائي القطب والاستقطابية الجزيئية واطياف الاشعة تحت الحمراء الخاصة بتلك التراكيب. تم حساب المتغيرات الالكترونية مثل طاقة التاين، الالفة الالكترونية، الكهروسالبية، المرونة الالكترونية، الصلادة الكهروكيميائية ومعامل التالف مع الاوساط طبقا لما يسمى نظرية التعامد المداري ( نظرية كوبمان). لقد وجد ان المعاملات الهندسية لشرائط الكرافين النانوية النقية المحسوبة في الدراسة الحالية تتفق بشكل جيد مع القيم العملية نتيجة للامثلية الهندسية التي تم الحصول عليها لتلك التراكيب، اما بالنسبة لشرائط الكرافين النانوية المطعمة فلم يتم الحصول على بيانات سابقة وعليه فان الدراسة الحالية قد زودتنا ببيانات جديدة في هذا المجال. ان الطاقة الكلية لشرائط الكرافين النانوية تتناقص بزيادة كل من عرض الشريط والاعداد الذرية للذرات في الشريط. ان النتائج التي تم التوصل اليها من خلال هذا البحث، ان فجوة الطاقة لشرائط الكرافين النانوية النقية بعدم وجود ذرات الهيدروجين في النهايات الطرفية لحلقات الفينيل تزداد بزيادة عرض الشريط. بينما تتناقص فجوة الطاقة لشرائط الكرافين النانوية النقية بوجود ذرات الهيدروجين في النهايات الطرفية لحلقات الفينيل مع زيادة عرض الشريط. بالنسبة للشريط بنفس العرض، كان فقط الشريط الاقل عرضا وبوجود ذرات هيدروجين فانه يمتلك فجوة طاقة اكبر مما هو للشريط بنفس العرض وبعدم وجود ذرات هيدروجين. ان استبدال ذرات الفلور والكلور بدلا من ذرات الهيدروجين ادى الى اختزال بسيط في فجوة الطاقة وهذا نتيجة للاتحاد الخطي للمدارات الذرية لذرات مختلفة لتشكيل المدارات الجزيئية. من جانب اخر، فان اضافة ذرات الاوكسجين بدلا من ذرات الهيدروجين لبناء شرائط اوكسيد الكرافين النانوية ادى الى تغيير طاقات المستوي الجزيئي العلوي المشغول والمستوي الجزيئي السفلي الفارغ وبالتالي فان التراكيب في مجموعتي شرائط اوكسيد الكرافين النانوية تمتلك قيم مختلفة من فجوة الطاقة وهي تعتمد على عدد وموقع ذرات الاوكسجين في كل تركيب. تعد هذه النتيجة الاساس المستقبلي للدراسة الحالية حيث ان بعض شرائط اوكسيد الكرافين النانوية تمتلك خواص عوازل وبعضها تمتلك تطبيقات اشباه موصلة. كما بينت النتائج ان طاقة التاين، الالفة الالكترونية والكهروسالبية لشرائط الكرافين النانوية النقية بوجود ذرات الهيدروجين هي اعظم منها لكل من شرائط الكرافين النانوية النقية بعدم وجود ذرات الهيدروجين في النهايات الطرفية لحلقات الفينيل في الشرائط، بينما الصلادة الكهروكيميائية تتناقص والمرونة الالكترونية تزداد باضافة ذرات الهيدروجين ماعدا الشريط الاول الاصغرفان له سلوك مغاير. ان جميع المتغيرات الالكترونية لشرائط كلور - وفلور - الكرافين النانوية كانت اقل منها لشرائط الكرافين النانوية النقية ماعدا المرونة الالكترونية فانها تزداد باضافة ذرات الفلور والكلور. علاوة على ذلك، ان انحلال مستويات الطاقة لكل تركيب يعتمد على كل من عرض الشريط، نوع وعدد وموقع الذرات في الشريط. بشكل عام، ان النتائج التي تم التوصل اليها في هذه الدراسة تشير الى بناء تراكيب جديدة لها خواص الكترونية جديدة مختلفة. لقد تم ايجاد اشكال مختلفة للجهد الكهروستاتيكي والكثافة الالكترونية الكلية طبقا لمناطق التوزيع المتماثل وغير المتماثل للشحنات في كل تركيب. كما ان النتائج قد بينت ان شرائط الكرافين النانوية النقية بعدم وجود ذرات هيدروجين تمتلك استقطابية جزيئية اعظم منها لتلك الشرائط النقية بوجود ذرات الهيدروجين. كذلك فان الاستقطابية الجزيئية تزداد بزيادة عرض الشرائط. ان اضافة ذرات الفلور، الكلور والاوكسجين بدلا من ذرات الهيدروجين قد ادى الى امتلاك التراكيب قيم مختلفة من الاستقطابية الجزيئية واعتمادا على نوع وموقع وعدد الذرات في كل تركيب. ان القيم المحسوبة لترددات اهتزازات التمدد والانحناء من اطياف الاشعة تحت الحمراء لمجموعتي شرائط الكرافين النانوية النقية قد دلت على توافق جيد مع النتائج العملية لمركبات الفينيل الحلقية. بينما لشرائط كلور - وفلور - واوكسيد الكرافين النانوية فان الدراسة الحالية قد اعطت بيانات جديدة في هذه الخاصية. | This thesis focuses on the quantum mechanical treatment of the structural, electronic and spectroscopic properties of Graphene NanoRibbons (GNRs). Density Functional Theory (DFT) was used with hybrid functional B3LYP/6 - 31G level of theory to investigate the proposed structures. These structures are divided into four groups, which are pure GNRs as a first group and second group, fluoride - and chloride - GNRs as third group, as well as oxidant - GNRs as a fourth group. The aim of this work concerne on the effect of the nanoribbons width and studying the effects of adding different atoms on the structural and electronic properties of GNR. The proposed structures were designed using nanotube Modular program and the DFT calculations have been performed using Gaussian 09 package of programs. Before the nanostructures are reorganized and studied in the laboratory, the computational calculations provide a useful tool for estimating the structural and electronic properties to offer information about these mentioned materials. The calculated structural properties included the geometrical parameters of the structures and the standard coordinates of all atoms in each structure. The electronic properties included the total energy, electronic states (HOMO and LUMO energies), energy gap, some electronic variables, electron density, electrostatic potential, density of states, molecular Polarizability and the relative IR - spectra. The electronic variables are calculated according to the so called orbital vertical theorem (Koopmans theorem).The results showed, the geometrical optimization of all pure GNRs have been found in a good agreement with experimental data due to their relaxation, and for the others doped GNRs, there is no reference data. The current study supplies new data in this field. The total energy of GNRs decreased with the increasing of the number of atoms in the nanoribbon. In addition, the results showed that, the energy gap of pure GNRs without hydrogen atoms in the terminal ends of phenyl rings increased with the increasing of the width of the nanoribbon. While the energy gap of pure GNRs with hydrogen atoms in the terminal ends of phenyl rings reduced with the increasing of the width of the nanoribbon. For the same width of the nanoribbon, only the smaller one with hydrogen atoms has larger energy gap than that without hydrogen atoms. Replacing the hydrogen atoms by fluorine and chlorine atoms in the nanoribbons leads to few reducing in the energy gap; this is due to the linear combination of atomic orbitals of different atoms to construct the molecular orbitals. On the other hand, adding the oxygen atoms instead of hydrogen atoms to construct the oxidant - GNRs changes both the HOMO and LUMO energies, and therefore, the structures in the two groups of oxidant - GNRs have various values of energy gap depending on the number and position of the oxygen atoms in each structure. This result is the main feature of current study in which some of the oxidant - GNRs have insulating properties and the others have semiconducting applications. The results showed that, IE, EA and EN of the pure GNRs with hydrogen atoms are greater than that of both pure GNRs without hydrogen atoms in the terminal ends of phenyl rings in the nanoribbons, while H is decreased and S is increased with adding hydrogen atoms except the first smaller nanoribbon, it has inverse behavior. All the electronic variables of fluorine and chloride - GNRs are smaller than that of pure GNRs except S, it was increased with adding of fluorine and chlorine atoms. Moreover, the degeneracy of energy levels of each structure depends on the width of the nanoribbon, the type, number and position of atoms in the nanoribbon. In general, the results of this study refer to that; the proposed constracted structures are of varies electronic properties. It found that, there are different shapes of electrostatic potential and total electron density according to the symmetric and asymmetric distribution areas of charges in each structure.The results showed the pure GNRs without hydrogen atoms have molecular polarizability greater than that of the pure GNRs with hydrogen atoms. So, the molecular polarizability was increased with the increasing of the width of the nanoribbons. Adding fluorine, chlorine and oxygen atoms instead of hydrogen atoms gave the structures different values of molecular polarizability depending on the type, position and number of atoms in each structure. The calculated values of frequency of stretching and bending vibrations from IR - spectra of the two groups of pure GNRs showed good agreement with experimental results of the phenyl rings compounds. While for the fluorine, chloride - GNRs and oxidant GNRs, this study supplies a new data in this aspect.

تقييم التلوث الاشعاعي والمخاطر الاشعاعية في المنشات النووية المدمرة في موقع التويثة النووي == Radioactive Contamination And Radiological Risk Assessment Of The Destroyed Nuclear Facilities At Al-Tuwaitha Nuclear Site

اسم المؤلف: ناظم خليل ابراهيم
اسم المشرف: عبد الله احمد رشيد | ندى فرحان كاظم
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

استخدام منظومة من ثلاث كيوبتات من الفرميونات كاداة لمعالجة المعلومات الكمية == The Utilization Of Three Qubits System Of Fermions As A Tool For Quantum Information Processing

اسم المؤلف: مزهر باقر صالح
اسم المشرف: لؤي ادور جورج | كاظم جواد كاظم
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

تحضير وتشخيص اغشية اوكسيد النحاس الرقيقة بتقنية الترسيب البخار الكيميائي CVD للتطبيقات التحسيسة == Synthesis And Characterization Of Copper Oxide Thin Films By CVD Technique For Sensing Applications

اسم المؤلف: محمود محمد كريم
اسم المشرف: انوار علي حسين الفؤادي | ضياء هادي حسين
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

تحسين وتصنيف صور الاجسام المتحركة تحت الماء == Under Water Images Enhancement And Classification For Moving Objects

اسم المؤلف: فاطمة اسماعيل عباس
اسم المشرف: علي عبد داوود الزكي | راضي شدهان حمودي الطويل
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
1 ... 4 5 6 7