عرض: 25 50 75 100 النتائج

نتائج البحث: 25 من أصل 32

السيطرة على تزامن اشارات الشواش في الشبكات الكهروبصرية Synchronization Control of Chaotic Signals in Optoelectronic Networks

اسم المؤلف: اطياف عدنان فرحان علي
اسم المشرف: سؤدد سلمان احمد
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد

خصائص اغشية CdZnO المحضرة بالليزر النبضي ككاشف هجيني Preparation and characterization of CdZnO thin films by PLD as heterojunction detector

اسم المؤلف: سوزان نجدت مدحت
اسم المشرف: جيهان ادمون سيمون
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

تصميم وخصائص منظومات ليزر النتروجين Design and Characterization of N? Laser Systems

اسم المؤلف: علي حاتم عطا الله
اسم المشرف: اكرم نوري محمد
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

تحضير ودراسة خصائص طبقة السليكون المسامي في تطبيقات الخلايا الشمسية Preparation and Characterization of Porous Silicon Layer for Solar Cell Applications

اسم المؤلف: حسن هادي بهجت
اسم المشرف: محمد سلمان محمد
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

تحضير ودراسة خصائص الكاشف الضوئي ZnMgO/Si باستخدام تقنية الاستئصال بالليزر Preparation And Characterization Of ZnMgO /Si photodetector using Laser Ablation Technique

اسم المؤلف: فرح مهدي عبد الكريم
اسم المشرف: خولة صلاح خشان
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

تحضير وتحديد خصائص السيلكون في المتحسسات الغازية Synthesis and characterization of porous silicon gas sensors

اسم المؤلف: رؤى عادل عباس
اسم المشرف: علوان محمد علوان
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

السليكون المسامي-جسيمات الفضة والذهب النانوية كوسائل تعزيز تشتت رامان السطحي لتتبع صبغتي الرودامين 6ج و الكرستال البنفسجي Porous Silicon-Ag & Au NPs as Surface Enhanced Raman Scattering means for

اسم المؤلف: الاء عبد الجبار حسين
اسم المشرف: علوان محمد علوان عدوية جمعة حيدر
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

استخدام نبضات الليزر النانوية في بعض التطبيقات الصناعية Nano seconds laser pulses for some metals processing

اسم المؤلف: سمية جليل ابراهيم
اسم المشرف: وليد خلف حمودي
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

دراسة الخصائص الكهربائية والبصرية للمتراكب البوليمريPVA - PEG - ZnO)

اسم المؤلف: سارة عبد الحسين عبد الكاظم عمران
اسم المشرف: بهاء حسين صالح ربيع
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بابل
الصفحات الاولى:

تحضير ودراسة خواص الخلية الشمسية المفعلة بالصبغه بطريقة الترسيب بالليزر النبضي Preparation and Characteristics Study of Dye Synthesized Solar Cell by Pulsed Laser Deposition

اسم المؤلف: وسن جبار طاهر
اسم المشرف: سمر يونس الدباغ سؤدد سلمان احمد
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: دكتوراه
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: هذا العمل يركز على تصنيع الخلايا الشمسية المفعلة بالصبغه باستخدام مادة شبه موصله من نوع P بدل من استخدام السائل لغرض معالجة بعض المشاكل منها معالجة التسرب في السائل المستخدم. الى جانب ذلك، فقد تم دراسة وتحضير المواد النانوية التي تلعب دورا هاما في اداء هذا النوع من الخلايا الشمسية, حيث ان هذه المواد القابليه على تحقيق كفاءة تحويل عالية مع الحفاظ على البساطة والكلفة المنخفضة. تتكون الخليه الشمسيه من (ITO/ TiO2 or ZnO /Ru /CuI/ Ag) حيث تم ترسيب المواد النانويه المستخدمه في هذا العمل بواسطة استخدام تقنية الترسيب بالليزر النبضي. واجريت الفحوصات التركيبيه والبصرية والكهربائية لجميع المواد النانويه المستخدمه في تحضير الخليه الشمسيه وكذلك دراسة تاثير عدد نبضات الليزر نيديميوم, التلدين وكفاءة الخليه الشمسيه : - تم فحص اغشية اوكسيد التيتانيوم واوكسيد الزنك النانويه بواسطة حيود الاشعه السينية (XRD) وجد ان تركيبها يتغير من العشوائي الى متعدد التبلور عند التلدين بدرجة حرارة o C450 . اما اغشية ايوديد النحاس فكانت متعددة التبلور بدرجة حرارة الغرفه.اظهرت دراسة طبوغرافية السطح لجميع الاغشية المحضرة بان حجم الحبيبات يزداد وكذلك خشونة السطح تزداد بزيادة عدد نبضات الليزر المسلطه وكذلك زيادة درجة الحرارة.من خلال فحص الخصائص البصريه لجميع الاغشية المحضره وجد ان الامتصاصية تزداد بزيادة عدد نبضات الليزر وكذالك عند زيادة درجة الحرارة.قياسات هول اثبتت ان اغشية اكسيد التيتانيوم واكسيد الزنك هي من نوع n - type بينما اغشية ايوديد النحاس فهي من نوع p - type . تم ملاحظة ان كثافة حاملات الشحنه تزداد وتحركيه هول تقل بوضوح مع زيادة عدد نبضات الليزر.تم تصنيع القطب الضوئي للخلايا الشمسيه المفعلة بالصبغه من مادة اوكسيد التيتانيوم واوكسيد الزنك النانويه, حيث لوحظ في حالة وجود اوكسيد التيتانيوم او اكسيد الزنك فان القطب الضوئي يعتمد على زيادة عدد النبضات وبالتالي اعتماد كفاءة الخليه الشمسية على عدد النبضات بسبب زيادة السمك, حيث لوحظ عندما كان عدد النبضات المسلطة 200 نبضه فان كفاءة الخليه الشمسيه كانت %2.115) ) وعندمزااد عدد النبضات الى 800 نبضه زادت كذالك كفاءة الخليه الشمسيه الى ( 5.654%) . ان مادة اوكسيد التيتانيوم هي افضل من اوكسيد الزنك حيث كانت كفاءة الخليه في حالة استخدام مادة التيتانيوم اعلى من كفاءة الخليه في حالة استخدام مادة اوكسيد الزنك حيث لوحظ عند استخدام 800 نبضه بلغت كفاءة الخلية الشمسية الى 5.654% في حالة استخدام مادة اوكسيد التيتانيوم ولكن انخفضت الكفاءة الى 4.231% عند استخدام مادة اوكسيد الزنك. وايضا تم وضع مادة ايوديد النحاس مع اوكسيد التيتانيوم ومع اوكسيد الزنك وكان اوكسيد التيتانيوم افضل من اوكسيد لزنك نتيجة لزيادة الكفاءة. | In a solid state dye - sensitized solar cell the electrolyte is replaced by a p - type semiconductor avoiding problems of leakage of liquid electrolytes. During this work the solar blend from (ITO / TiO2 or ZnO/ Ru / CuI / Ag) is fabricated. The thin films were prepared by pulse laser deposition (PLD) technique and deposited on (ITO) glass substrate. The structural, optical and electrical properties of all samples where studied. XRD analysis indicated that the structure of TiO2 and ZnO thin film change from amorphous to polycrystalline if annealed to 450 Co . XRD analysis shows the CuI at room temperature is polycrystalline. The morphology of surface, found the grain size and roughness of TiO2, ZnO and CuI thin film increase as the number of Nd : YAG laser pulse and temperature increased. Optical properties investigation of TiO2, ZnO and CuI thin film showed that as the number of Nd : YAG laser pulse and temperature increase that lead to increase in absorption. Hall effect measurement prove that TiO2 and ZnO are N - type while CuI is P - type semiconductor, as the number of Nd : YAG laser pulses and temperature increase the carrier concentration nH increase while the mobility µH decrease. The I - V characteristics of the fabricated solar cell is measure , it can be noticed that the photocurrent collected from the TiO2 or ZnO is depending on the number of pulses. The increase in the number of the pulses resulting increase in the photocurrent, indicating the dependence of current collection efficiency on number of pulses. In the same material (TiO2) can be noted the number of pulses equal to 200 the conversion efficiency equal to 2.115 % while increase number of pulse to 800 pulse the conversion efficiency increase up to the 5.654 % from this value it can be observed the conversion efficiency increases when the number of the pulses increasing. Also when using ZnO material it observed that the conversion efficiency depend on the number of pulses when the number of pulses equal to 200 the conversion efficiency equal to 1.144 % while increasing the number of the pulses to 800 pulse the conversion efficiency increase up to the 4.231%, as well as when use TiO2 the efficiency increase more than the with use the ZnO. It can be observed that the use of CuI in solar cell the efficiency depend on the number of pulses , increase with increasing number of pulses. I - V parameter of the solar cell with different number of pulse for CuI thin film, can be observe when use the CuI with TiO2the conversion efficiency is higher from the use CuI with ZnO, the value of conversion efficiency when use CuI with TiO2 at 800 pulses up to rage 5.192%, while when use CuI with ZnO the value of conversion efficiency at 800 pulse equal to 3.654% from this value can be conclusion the efficiency of the TiO2 is up from the efficiency of ZnO

مقارنة نظرية بين HgCdTe وAlGaAs لنظامي البئر الكمي الليزري ذو التركيبين غير المتجانسين Theoretical Comparison between HgCdTe and AlGaAs Heterostructure Quantum Well Laser Systems

اسم المؤلف: وديان كاظم عبد الزبيدي
اسم المشرف: ابتسام محمد تقي سلمان
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: هذا البحث يصف مقارنة نظرية بين نظامي ولليزر البئر الكمي ذو التركيب غير المتجانس. حيث تم دراسة تاثير العوامل المختلفة لهذا التركيب مثل عرض البئر وعرض الحاجز للبئر الكمي المفرد والمتعدد على عوامل الليزرمثل عامل التقيد البصري وتيار العتبة وكثافة تيار العتبة والربح البصري وقدرة الخرج والكفاءة . بالاضافة الى دراسة كثافة الحالات للبئر الكمي.افضل قيمة لعامل التقييد البصري (0.308) للتركيب ذو ثلاثة ابار كمية و(W=21.5nm) و(0.0224) للتركيب ذو خمسة ابار كمية و(W=11.3nm). عامل التقيد له تحسن كبير في التركيب المتعدد الابار افضل من التركيب ذو البئر الكمي المفرد . واظهرت النتائج ان عامل التقييد للتركيب المتعدد الابار اكبر منه للبئر الكمي المنفرد بمقدار 18 مرة للتركيب وبمقدار 25 مرة للتركيب . هذا التحقيق لتحسين عمل نبيطة الليزر دايود من خلال تاثير عامل التقييد البصري على الربح وتيار العتبة والقدرة الخارجة والكفاءة تحت الانحياز الامامي في المنطقه الفعالة، كانت كثافة تيار العتبة ووكفاءة (89% ل و97% لـ ) | This work is description of theoretical comparison between two systems and for heterostructure quantum well laser. Where studied the effects of the variation parameters for this structure such as a well width, barrier width for Single and Multi - Quantum Well, on laser parameters such as optical confinement factor, threshold current, threshold current density, optical gain, output power and efficiency. In addition we studied the density of states for quantum well.The optical confinement factor has the best value (0.308) for 3QWs at (W=21.5nm) and (0.0224) for 5QWs at (W=11.3nm). It introduced a significant improvement in MQW is much higher than SQW for two systems. The results showed that optical confinement factor of 3QW are much higher (by a factor 18) for and (by a factor 25) for 5QW, from optical confinement factor of SQW. This investigated for improve the work of laser diode device through the effect of optical confinement factor on the gain, threshold current, output power and efficiency under forward bias in active region, where threshold current density , with efficiency (89%for and 97% for )

تحضير ودراسة الخواص الطيفيه الى الوسط الليزري الفعال Er : TiO باستخدام تقانة الصول - جل Preparation and Study of the Spectroscopic Properties of Er : TiO2 Laser Active Medium using Sol - Gel Technique

اسم المؤلف: هناء محمد ياسين
اسم المشرف: صباح نوري مزهر بسام غالب رشيد
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: دكتوراه
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ions Doped nano particular titanium dioxide was prepared via sol - gel method under varying conditions (with doping rates equal to 1.24%wt, 2.65%wt, 3.78%wt, 5.05%wt and 6.31%wt). The structure, morphological and spectroscopic properties of prepared doped samples were investigated by a variety of techniques, including XRD, AFM , UV - Visible spectroscopy and photoluminescence spectroscopy.XRD analysis shows that TiO2 prepared samples have amorphous structure turn to polycrystalline anatase structure after annealing process. The lattice constant parameters 'a' and 'c' of the tetragonal lattice anatase TiO2 powder has been calculated; the results showed that the value of 'a' remains essentially unchanged, while the lattice constant 'c' have slightly increased at lower doping rate then become stable at higher doping rate. This is due to a combination of interstitial and substitutional accommodation of the dopant ions.The FTIR spectra for pure and doped samples after annealing process show a single transition peak at wave number around 1200cm - 1 and 1102 cm - 1 respectively. The wavelength of high transition rate of this peak depends on Er3+ concentrations. By Comparing with wavelength of high transition rate of pure TiO2 sample, slightly peak wavelength increments shift occur with increment of doping concentration rate. FTIR spectra give a good indication in direction of synthesis of optical band - pass filter at a wavelength around 9.07μm (~1102 cm - 1).Judd - Ofelt analysis is performed to calculate the three Judd - ofelt of parameters; Ω2, Ω4 and Ω6. From the absorption spectra, the radiative transition probabilities A(J;J’), radiative lifetime τrad and fluorescence branching ratioare calculated for each excited upper manifolds states of Er3+ .A photoluminescence peaks was recorded at wavelength around to 498nm, 533nm and 1533 nm. The emission cross - section σem for prepared samples are calculated. It was founds that sample with doping rate 5.05%wt have high σem values in compares with other samples, and it’s value is close to those value of Er : Glass.According to the spectroscopic properties of doped samples, it could be concluded that Er : TiO2 has the potential to be a laser mat

دراسة تاثير استبدال (Y2O3,Sb2O3,SrO) على الخصائص التركيبية والكهربائية للمركب فائق التوصيل HgBa2Ca2Cu3O8 Study the effect of (Y2O3,Sb2O3,SrO) substatution on the structural and electrical properties of the HgBa2Ca2Cu3O8+? superconductor compound

اسم المؤلف: نور قاسم فاضل
اسم المشرف: كريم علي جاسم
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تتضمن الدراسة تاثير الاضافات (SrO or Y2O3 or Sb2O3) على الخواص التركيبية والكهربائيه للمركب الفائق التوصيل . [Hg 1223] تم حضير النماذج الاتيه HgBa2 - xSbxCa2Cu3O8+δ) وHgBa2 - xYxCa2Cu3O8+δو (HgBa2 - xSrxCa2Cu3O8+δ ولقيم x=0, 0.1, 0.2, 0.3 بطريقه تفاعل الحاله الصلبة.وقد درس الخصائص التركب البلوري باستخدام حيود الاشعة السينية ( XRD ) واظهرتحليل حيود الاشعة السينية ان جميع العينات ذات تركيب (tetragonal) تحوي على اطوارتركيبه فائقه التوصيل منخفضة (1212و1201) وعالية (1223) , وان النسب الطوريه ) نسبه الطورالعالي 1223) تزداد عند الاستبدال. كذلك وجد بان قيمة الثابت الشبيكة (c) يقل عند استبدال (SrO or Y2O3 or Sb2O3) في موقع الباريوم.حيث ان قيمه ثابت الشبيكه c للمركب HgBa2 - x(Sr or Sb or Y)x Ca2Cu3O8+δ ل x=0 هي c=15.75 ,في حين عند استبدال Srتنخفض قيمه ثابت الشبيكه cالى c=15.3510 (x=0.1), 15.3811 (x=0.2), 15.4431 (x=0.3),كذلك تنخفض قيمه ثابت c عند استبدال Sbالى 15.3417 (x=0.1), 15.4274 (0.2), 15.4432 (x=0.3).عند استبدال Yتنخفض قيمه ثابت الشبيكه cالى15.353 (x=0.1), 15.397 (0.2), 15.473 (x=0.3). . لحساب درجه الحراره الحرجه تم دراسة المقاوميه الكهربائيه باستخدام تقنيه القطاب الاربعة, حيث وجد ان درجه الحرارة الحرجه تزاد عند استبدال SrO وY2O3 وSb2O في موقع الباريوم وان اعلى درجه حرارة حرجة تم الحصول عليها عند استبدال Srوهي 138 كلفن. في درجة حرارة الغرفة تم قياس ثابت العزل الكهربائي كداله للتردد في المدى (Hz50 - 1MHZ), قد وجد ان ثابت العزل الكهربائي للتردد HZ 50 هو 45.489، بينما عند استبدال (Sr)ينخفض ثابت العزل الكهربائي الى 45.1715 (x=0.1)، 24،2123 (0.2x=) ,16.82781313 (x=0.3)، وانخفض ايضا ثابت العزل الكهربائي عند استبدال (Sb) الى 12،708 (x=0.1)، 10.339 (0.2x=) ,10.816 (x=0.3) لكن عند استبدال (Y) ثابت العزل الكهربائي يزداد الى 63.3682 (x=0.1) الى 26،378 (x=0.3). | The present thesis includes effect of (SrO, Y2O3 and Sb2O3) substatution on the structural and electrical properties of the [ Hg - 1223] compounds. Which have prepared the superconducting compounds HgBa2Ca2Cu3O8+δ ,HgBa2 - xYxCa2Cu3O8+δ, HgBa2 - xSbxCa2Cu3O8+δ and HgBa2 - xSrxCa2Cu3O8+δ (x=0.1,0.2,0.3) by useing Solid state reaction method. The crystal structures for all the specimen have been determined by of X - ray diffraction. Shows the XRD that all specimen have tetragonal structures correspond to the high [ Hg - 1223] and low - phase[ Hg - 1201 and Hg - 1212], and there is a decrease in c - parameter value when substituted of (Sb2O3 or SrO or Y2O3) in Barium site, where that c - parameter value of HgBa2 - x(Sr or Sb)x Ca2Cu3O8+δ for x= 0 is c=15.75, while at substatution (Sr) decreased c - parameter value to c=15.3510 (x=0.1), 15.3811 (x=0.2), 15.4431 (x=0.3), also decreased c - parameter value at substatution (Sb) to 15.3417 (x=0.1) , 15.4274 (0.2) and 15.4432 (x=0.3), at substatution (Y) decreased c - parameter value to 15.353 (x=0.1) , 15.397 (0.2) and 15.473 (x=0.3). while the volume fraction of the high - Tc phase increased with the increase of (Sb2O3 or SrO or Y2O3) content. Electrical resistivity was used to find the critical temperature using the four - probe technique, found that transition temperature which it increased when substituted (Sb2O3 or SrO or Y2O3), and we get a highest critical temperature is 138k. The dielectric constant have been measured and is a function of applied frequencies ( range of 50 Hz to 1MHz) at room temperature HgBa2 - x(Sr or Sb)x Ca2Cu3O8+δ for x= 0. It was found that the dielectric constant of at the frequency 50Hz is 45.489 , while at addition(Sr) decreased dielectric constant are 45.1715 (x=0.1) , 24.2123(0.2) and 16.82781313 (x=0.3),also decreased dielectric constant at addition(Sb) to 12.708 (x=0.1) , 10.339(0.2) and 10.816 (x=0.3).but when addition(Y) dielectric constant increasing are 63.3682 (x=0.1) to 26.378 (x=0.3). It was found that dielectric loss factor (tan) of all specimens decreased with the increase of frequency.

محاكاة الحل التحليلي لقدرة خرج ليزر ليف زجاج السليكا المطعم باليتاربيوم

اسم المؤلف: كنار نبيل جليل
اسم المشرف: مظهر شهاب احمد
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The current study included treating a theory of general derivation equation coefficients output laser's power ( ) by using the analytical solution of the rate equations that included the transition factor ( ), in which the losses scattering be neglected for a laser system when the active material is an optical fiber, its core is silica glass and Yb3+ - doped.While its resonant cavity it resonator Fabry - Perot, and it is pumping through one end of the optical fiber, while the Continuous Wave (CW) laser emission from the other end.In this study, it has been selected pumping wavelength ( 920*10 - 9m) and lasing wavelength ( 1090*10 - 9m) for this middle effective as an example of a typical plan to pump quasi four levels to find a numerical solution of the equation of the output laser which have been derived by programmable coefficients of this equation matlab language (version 8.1) this happened, after the coefficient ( ) has been calculated for all these laser transitions of this middle effective when it has been pumped ( ) as mention above.The simulation results for this laser system have presented that since the optical fiber is Single Clad Fiber (SCF) and a design of (Lycom ) type, it has been found that the concentration of the type (CorActive) is the highest value for obtaining high efficiency.The laser output power ( ) has been drops linearly by the increasing of core optical fiber radius, while it increases linearly with the increasing of the length of optical fiber, the laser output mirror reflectivity, pumping power, it is the highest values when using the optical fiber Single Mode (SM).In case of the optical fiber is Double Clad Fiber (DCF) and the design of type Large Mode Area (LMA), the ( ) decreases with increasing radius of the core of the optical fiber, while increases with each of the length of optical fiber and pumping power.In addition to that it has been found that ( ) increases linearly with the increasing pumping power whether the inner clad fiber shape is a Rectangle or Square or Circular, and that, the value of laser output power and efficiency are higher in the case of a Rectangular shape.

تحضير جسيمات اوكسيد الخارصين النانوية الممزوجة بالحديد بطريقة الليزر النبضي Synthesis of ZnO Nanoparticles Mixed with Fe Using Pulse Laser Deposition

اسم المؤلف: ايمان عكيدي مكحول
اسم المشرف: سمر يونس طه
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: In this work, pulsed laser deposition (PLD) technique is employed to prepare pure ZnO and ZnO mixed with Fe thin film at different concentration on glass substrate. Nd.YAG laser beam, λ=1064 nm, repetition rate 6Hz with the pulse duration 10ns has been used to deposited ZnO and ZnO : Fe thin films under vacuum of 10 - 2mbar. The effects of the number of laser pulses (100,300,600 and 800), Fe concentration (3,5,7%wt) at ambient temperature and annealing temperature at 500ºC on the structure, optical and electrical properties of these films have been studied.The structure characteristic investigated by X - Ray Diffraction (XRD). XRD pattern showed that as number of laser pulses increase the structure changed from amorphous to polycrystalline at 800 laser pulses for pure ZnO. For ZnO : Fe(3%) the structure stay polycrystalline and the intensity increased also the grain size increase. Same result obtained as the concentration of Fe increased (3,5and 7%) for ZnO : Fe thin films and after annealing.The morphology is analyzed by AFM technique. The AFM results showed that the Root Mean Square (RMS) of surface roughness is increased with increasing number of laser pulses from 5.96 nm to7.16 nm and from 3.23nm to 10.2nm for both films of pure ZnO and ZnO : 3%Fe respectively. The RMS for both surfaces were increased at the pulses range 4.15nm to 8.55nm when increasing Fe concentration at ambient temperature and conducted by annealing process.The optical properties measured by UV - VIS spectrometer to compute the band gap of pure ZnO and ZnO : Fe were found high transparent in the visible region band gap for ZnO and ZnO : 3%Fe were decreased from 3.13 eV to 2.9eV and from 2.8eV to 2.55eV respectively. As well as the energy gap was found severe reducing in its values when the Fe increased, where the energy gap suffer decreased and became 3.02eV to 2.52 eV at ambient temperature and from 3.15 eV to 2.7eV after performed annealing process.The hall effect measurement proves that the pure ZnO and ZnO : Fe are n - type semiconductor, the conductivity is increased by increasing mixing Fe concentration where the value was increased from 6.4X10 - 4 Ω. - 1cm. - 1 to 6.37 Ω. - 1cm. - 1 and from 1.97X10 - 5 Ω. - 1cm. - 1 to 5.207 Ω. - 1cm. - 1 when achieved annealing at 500ºC.

دراسة نظرية لليزر الليف البصري المطعم بالنديميوم Theoretical Study for Neodymium - Doped Optical Fiber Laser

اسم المؤلف: امجد عبد الحميد سلمان
اسم المشرف: مظهر شهاب احمد
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: to find equation of lasing output power (Pout) by using the numerical emulation Secondly, calculating the (Pout) of Nd+3 - doped optical fiber laser as a typical example for the optical fiber laser, which is process according to this system. The required equations to calculate (Pout) was programmed by Matlab program (version8.1). Two types of hosts were used in this simulation, the first type is Silica with four designs using commonly in the above mentioned, the four designs are Lycom (a), Lycom (b), York and IVA with lasing emission at the wavelengths (1064×10 - 9m) and (1331×10 - 9m). The second type of hosts is ZBLAN with only one design is Le Verre fluore, with lasing emission at two wavelengths (1048×10 - 9m) and (1317×10 - 9m). The first step in this emulation was determining the value of numerical aperture (NA) for each design of special designs and at the special wavelengths for every host, which can obtain the highest values of lasing output power (Pout) and efficiency (η) at value of (NA).The second step was calculating the (Pout) corresponding to pump power (Po) for each host according to the designs and the wavelengths related to the host, In case of the host Silica, for the two wavelengths of this host, it is found that the (Pout) was the highest value when the design (York) was used, while in case of the host (ZBLAN), it is found the highest value of (Pout) is when using the wavelength (1048×10 - 9m). For addition that, it is found that to obtain the highest values of (Pout) and (η) for this type of laser, it must be use the host Silica at the wavelength (1048×10 - 9m). According to that, the third step was using this host and this wavelength to calculate the effect of the numerical aperture (NA), core radius (a), cladding radius (b), fiber length (L),reflection coefficients (R2), Nd+3 - dopant concentration in the core (No), lifetime of upper laser level (T2) and pump power (Po) on the (Pout). The changing of the above mentioned coefficients values was determinate with its range which is finding in four designs related to the host Silica. It is found that the value of (Pout) decreased with the increase of the values of (NA, a, b, L and No), while increase with the increase of the values of (R2 ,T2 and Po), through that, the optimal values of these coefficients which must be used to obtain the highest values of (Pout) and (η) for this type of laser.

دراسة الخواص البصرية والكهربائية ومحدد القدرة البصري للصبغات العضوية المشوبة للاغشية البوليمرية STUDY OF THE OPTICAL AND ELECTRICAL PROPERTIES,AND OPTICAL POWER LIMITING OF ORGANIC DYES DOPED POLYMER FILMS

اسم المؤلف: فيصل صادق ثامر
اسم المشرف: عماد الدين حسين علي السعيدي
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
الجامعة: جامعة البصرة
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: This thesis contains results of a extensive study for many important and fundamental properties of two organic dyes, these are Phenol Red and Light Green SF Yellowish. To obtain the dye doped polymer films used for our study, the Polymethylmethacrylate (PMMA) polymer was doped by each one of these dyes , at different concentrations : 0.01, 0.02, 0.03, 0.04, 0.05, 0.30, 0.40 mM . Effect of adding small amount of Iodine (I2) , as a dopant, to the constituents of the dye doped polymer films at concentration of 0.03 mM for each dye, on the optical and electrical properties of the polymer films, was also studied. Casting method was used for preparing the dye doped polymer films samples.The present work involves the study of the linear and the nonlinear optical properties, and the optical power limiting of the dye doped polymer films, as well as study of the electrical properties of these films.We have studied the optical properties of both the dye - doped polymer films and the dye - doped polymer films with Iodine (I2). The study includes the following parameters : absorbance (A), transmittance (T), reflectance (R),iiabsorption coefficient (α), extinction coefficient (k), refractive index (n), dielectric constant (ε) with its real (εr) and imaginary (εi) parts, optical conductivity (σopt.), electrical conductivity (σelec.), and optical energy band gap (Eg).The results of the optical properties show that the dye - doped polymer films having high transmittance (T) , low reflectance (R) , and low absorption coefficient (α ) , over the wavelengths of the visible spectrum, and these films have energy band gaps belong to the indirect transitions. While the dye - doped polymer films with added different doping ratio of Iodine (I2), have low transmittance (T) and an increase in the values of reflectance (R) and absorption coefficient (α ), particularly in the absorption regions over the wavelengths near the ultraviolet (UV) region of the the electromagnetic spectrum.To study the nonlinear optical properties of the dye - doped polymer films, the laser beam z - scan technique was used with solid state laser (SSL) operating at the continuous wave (CW) at 532 nm. The laser output can be varied within the range 0 - 100 mW. The obtained results showed that the samples of the dye - doped polymer films as well as the samples of the dye - doped polymer films with Iodine(I2) have a nonlinear refractive index with negative value (n2 < 0) (occurrence of the self - defocusing effect) and aiiinonlinear absorption coefficient with negative value also (β < 0) (occurrence of the saturable absorption).We have studied the optical power limiting for the prepared films samples , using the laser beam z - scan technique. We have obtained optical power limiting with good optical properties. The results revealed that the smallest value for optical power limiting threshold is 15 mW for the Phenol red dye doped polymer film sample at concentration of 0.03 mM with Iodine doping ratio 36.2 % of the dye weight.Also, The electrical properties of the prepared samples, the dye - doped polymer films and the dye - doped polymer films with Iodine (I2), have been studied using the current - voltage (I - V) characteristic for three temperature degree values , which are given to these samples, these are : 298 K, 308 K and 318 K. The values of the electrical conductivity (σ) and the electrical conductivity activation energy (Ea) of polymer film were calculated. The influence of changing the temperature on these parameters was studied.The results obtained from the present our study indicate that the two organic dyes, Phenol Red and Light Green SF Yellowish, are good candidates for optical applications and they could be used for the photonic devices, the photo - electronic devices , and also in the optical power limiting

تضمين البرم في ليزرات اشباه الموصلات (ليزرات البرم) Spin Modulation in Semiconductor Lasers (Spin lasers

اسم المؤلف: ضیاء جبار عكوش
اسم المشرف: حسن عبد الله سلطان
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
الجامعة: جامعة البصرة
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: The introducing of electronic spin with its charge is the key of many applications which uses the electrical and magnetic properties of the electron , (spintronics )and semiconductor lasers.This concept gives led to the newest type of semiconductor lasers called ( Spin Lasers ).In the present thesis a numerical study of the effect of the carriers spin on the semiconductor lasers described by VCSEL using Matlab and Runge - Kutta method .The study includes the effect of the spin polarization in terms of the polarization injection and the injection current also to find the two thresholds of right polarized light circularly and the left circularly polarized one.The effect of the spin relaxation time on the dynamics of spin - VCSEL such as the steady state time evolution and direct modulation of the injection current and the polarization injection were studied also is presented too.The study shows that the spin VCSEL strongly affected by the injection current , polarization injection and spin relaxation time.The present results show that the laser threshold can reduced to quarter than that of conventional laser.