عرض: 25 50 75 100 النتائج

نتائج البحث: 25 من أصل 2,905

تحديد حجم الجسيمة وانفعال الشبيكة من خلال تحليل توسيع الذروة لحيود الاشعة السينية لجسيمات اوكسيد الزنك النانوية == Restriction of Particle Size and Lattice Strain through X_Ray Diffraction Peak Broadening Analysis of Zinc Oxide Nano_Particles

اسم المؤلف: احمد علاء احسان
اسم المشرف: خالد هلال حربي
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الدراسة تم تحديد حجم البلرة وانفعال الشبيكة لجسيمات اوكسيد الزنك النانوية باستخدام طريقتي التباين والعرض المتكامل ، واستخدمت ايضا بعض الطرق الاخرى مثل شيرر ويليامسون - هال لحساب المعلمات اعلاه. ثم تحسب كثافة الانخلاع ، مساحة السطح ودرست سلوك حجم البلرة انفعال الشبيكة مع درجات حرارة مختلفة باستخدام طريقة التباين. تم في هذه الدراسة تطوير طريقة التباين من خلال تقديم ثلاثة نماذج جديدة هي نموذج التباين التشوه المتماثل (UDVM),نموذج التباين اجهاد التشوه المتماثل (UDSVM) ونموذج التباين كثافة الطاقة التشوه المتماثل (UDEDVM) لتحديد المعلمات الشبيكة مثل حجم البلرة ، انفعال الشبيكة ، والاجهاد، وكثافة الطاقة للمرة الاولى. في طريقة التباين حسبنا قيم حجم البلرة ومربع متوسط الانفعال هي (22.276 nm) و(0.133473 x 10 - 3) على التوالي, ثم حسبنا قيم حجم البلرة وانفعال الشبيكة هي (22.276 nm) و(14.47962 x 10 - 3) على التوالي بواسطة استخدام , UDVM قيم كل من حجم البلرة, الاجهاد وانفعال الشبيكة (22.276 nm), (3.7266 x 10 - 3 TPa) و(14.48006 x 10 - 3) التوالي بواسطة استخدام ,UDSVM قيم كل من حجم البلرة, كثافة الطاقة , انفعال الشبيكة والاجهاد (22.276 nm), (21689.7 KJ/m3) , (14.48024 x 10 - 3) و(2.9957 x 10 - 3 TPa) التوالي بواسطة استخدام .UDEDVM في طريقة العرض المتكامل حسبنا قيم حجم البلرة وانفعال الشبيكة هي (25.126 nm) و(2.443 x 10 - 3) على التوالي. في طرق اخرى مثل شيرار (Scherrer) التي تعطي قيمة حجم البلرة هي (17.622 nm) وقيمة انفعال الشبيكة هي (6.0362 x 10 - 3), بينما ويليمسن - هال (Williamson - Hall) التي تعطي قيمة حجم البلرة هي (22.063 nm) وقيمة انفعال الشبيكة هي (1.19225 x 10 - 3), حددنا قيمة كثافة الانخلاع والتي هي (7.912 x 1015 lines/m2) بواسطة استخدام نتائج طريقة التباين وحددنا قيمة مساحة السطح والتي هي (4.801 x 104 m2/g). وقد استخدمت طريقة التباين لتحديد التغير في قيم حجم البلرة وو مربع متوسط الانفعال في درجات حرارة مختلفة (80 ، 300 ، 350 و400) درجة مئوية. | The lattice strain and crystallite size of ZnO nanoparticles have been determined by using variance and integral breadth methods, and also used some other methods such as Scherrer and Williamson - Hall to calculate above parameters. Then calculated dislocation density, surface area and studied the behavior of crystallite size and lattice strain at different temperatures by using variance method. In this study the variance method have been developed by presenting three new models (The Uniform Deformation Variance Model UDVM, The Uniform Deformation stress Variance Model UDSVM and The Uniform Deformation Energy Density of Variance Model UDEDVM) to determine lattice parameters such as particle size, microstrain, energy density and stress for the first time. By variance method we have calculated the values of crystallite size and mean square strain are (22.276 nm) and (0.133473 x 10 - 3) respectively. Then we have calculated the values of crystallite size is (22.276 nm) and lattice strain is (14.47962 x 10 - 3) by using UDVM, the values of crystallite size is (22.276 nm), stress is (3.7266 x 10 - 3 TPa) and lattice strain is (14.48006 x 10 - 3) by using UDSVM and the values of crystallite size, stress, energy density and lattice strain (22.276 nm), (2.9957 x 10 - 3 TPa), (21689.7 KJ/m3) and (14.48024 x 10 - 3) respectively by using UDEDVM. In integral breadth method we have calculated the values of crystallite size and lattice strain are (25.126 nm) and (2.443 x 10 - 3) respectively. The other methods such as Scherrer which gives the value of crystallite size is (17.622 nm) and lattice strain is (6.0362 x 10 - 3), while the Williamson - Hall gives the crystallite size is (22.063 nm) and the lattice strain is (1.19225 x 10 - 3). We have determined the value of dislocation density which it is (7.912 x 1015 lines /m2 ) by using the results of variance method and determined the value of surface area which it is (4.801 x 104 m2/g) by using the results of variance method. Have been used variance method to determine the change in values of crystallite size and mean square strain at different temperatures (80, 300, 350 and 400) oC

الخصائص الفيزيائية الضوئية وانتقال الطاقة لاغشية بولي مثيل ميثا اكريليت المطعمة بصبغتين ليزريتين كومارين 102 ورودامين B == Photophysical Properties and Energy Transfer of Two Laser Dyes (Coumarin 102 and Rhodamine B) Doped PMMA Films

اسم المؤلف: احمد عامر ناصر
اسم المشرف: محاسن فاضل هادي الكاظمي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الالياف الضوئية
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم تقسيم هذا البحث على ثلاثة اجزاء : الجزء الاول تضمن دراسة تاثير التركيز للكومارين 102 والرودامين ب في الحالة السائلة والصلبة . النتائج بينت ان شدة الامتصاص تزداد مع زيادة تركيز الصبغة وهذا يتوافق مع قانون بير - لامبرت. وان افضل تركيز كان (5 - 10x5) مولاري لكلا الكومارين والرودامين ب. ايضا شدة الامتصاص ازدادت مع زيادة نسبة تطعيم الصبغة للبوايمر في حالة الاغشية وان افضل تركيز في هذة الحالة كان (4 - 10x1) مولاري بنسبة تطعيم ( 20 مل) للكومارين 102 حيث اظهر امتصاصية جيدة (0.252) وناتج كمي (0.72) ولاغشية الرودامين ب كان افضل تركيز (5 - 10x5) مولاري بنسبة تطعيم للصبغة (15 مل) حيث ظهرت شدة الامتصاصية (0.11) والناتج الكمي (0.96) . اما الجزء الثاني فتضمن دراسة انتقال الطاقة لخليط الكومارين 102 والرودامين ب في الحالة السائلة والصلبة. باخذ الكومارين 102 كمانح والرودامين ب كقابل وتثبيت تركيز المانح عند (4 - 10x1 مولاري و4 - 10x5 مولاري) وتغير تركيز القابل من (4 - 10x1 الى 2 - 10x1 مولاري) في كلتا الحالتين.لوحظ هناك ازاحة نحو الاطوال الموجية الطويلة (ازاحة حمراء) في طيف انبعاث الرودامين ب تزداد مع زيادة تركيزه. والتي تعطي لنا امكانية تنغيم عالية في هذا المدى من الطول الموجي. في حالة السوائل افضل تركيز لانتقال الطاقة كان للمانح (4 - 10x1) مولاري وافضل تركيز للقابل كان (4 - 10x5) مولاري. في هذة التراكيز تم تحسين طيف فلورة الرودامين ب. ان عملية الامتصاص الذاتي حدثت عندما يكون تركيز القابل (4 - 10x1) مولاري وبهذة العملية تم تحسين طيف فلورة الكومارين 102 الى اعلى قيمة. في حالة الاغشية افضل نسبة تطعيم لانتقال الطاقة كانت للكومارين 102 (4 - 10x1) مولاري وللرودامين ب (2 - 10x1) مولاري وعندما يكون تركيز الكومارين 102 (4 - 10x5) مولاري وللرودامين ب (2 - 10x1) مولاري. الجزء الثالث يبين FTIR وحيود الاشعة السينية XRD والتصوير الفوتغرافي الذي يخص التركيب. نتائج FTIR تظهر زيادة وازاحة في شدة قمم الاواصر عند زيادة تركيز الصبغة ونسبة تطعيمها مع البوليمر. ومن نتائج مXRD نلاحظ سلوك الكومارين 102 والرودامين ب سلوكا بلوريا. اما PMMA فسلوكه عشوائي. ومن نتائج التصوير الفوتغرافي نجد بان صبغة الرودامين ب تعمل كمرشح عند خلطها مع ال PMMA بوليمر | This study included three parts : the first part included concentration effect study of coumarin 102 (C102) and Rhodamine B (RhB) in solution and solid state, the obtained result show the absorbance intensity increase as increase the concentration and this agreements with Beer - Lambert law, the best concentration was (5x10 - 5M) for both C102 and RhB. Also, the absorbance intensity increased with increasing the doping ratio of dye in film state, the best concentration in this state was (1x10 - 4M) for C102 with doping ratio (20ml). Which have a good absorbance was (0.252) and quantum yield was (0.72). And for RhB films was (5x10 - 5M) with doping ratio (15ml) which has absorbance (0.11) and quantum yield (0.96). The second part contented the energy transfer study of C102 and RhB mixture in solution and solid state by takeing C102 as donor and RhB as an acceptor and fixed the donor concentration at (1x10 - 4M and 5x10 - 4M) with variation the acceptor concentration from (1x10 - 4M to 1x10 - 2M) in two cases, observed that the red shift in RhB emission increase with increase the acceptor concentration, which give us a long range of tunable in emission spectrum of RhB dye. The best donor concentration was (1x10 - 4M), and the best concentration of acceptor was (5x10 - 4M) in solution state this concentration led to improve the RhB fluorescence spectrum. The self absorption process occurred when the acceptor concentration (1x10 - 4 M) and this process led to improve the C102 fluorescence spectrum to maximum value . For the solid state the best doping ratio of energy transfer was (1x10 - 4M C102 + 1x10 - 2 M) and (5x10 - 4C102 + 1x10 - 2M). The third part explained the FTIR and X - ray diffraction and microscope structure study. The FTIR result show increase and shift the band peak intensity at increase the concentration and doping ratio. From XRD show the crystalline structure of C102 and RhB and amorphous structure of PMMA polymer. The morphology study show the RhB dyes behave as filter at doped it with PMMA polymer

تاثير اضافة بولي اثيلين اوكسايد على خصائص بعض البوليمرات في التطبيقات الطبية == Influence of Adding Polyethylene Oxide on Some Polymer Properties for Medical Applications

اسم المؤلف: احمد شاكر حسين كحيط
اسم المشرف: رحيم كعيد كاظم حسين المرشدي
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تضمنت الاطروحة دراسة الخصائص الفيزيائية لبوليمر بولي اثيلين اوكسايد (PEO) باستخدام المذيب ثنائي ميثيل الفورماميد (DMF) باستخدام تراكيز مختلفة (0.1% - 0.8% ) (غم / مل) قبل وبعد اضافة بعض البوليمرات ومن هذه البوليمرات بوليمر بولي اثيلين كلايكول (PEG) والبوليمر بولي مثيل ميثاكريليت ( PMMA) باوزان مختلفة. وتم دراسة الخصائص الريولوجية والبصرية والميكانيكية والكهربائية للنماذج المحضرة السائلة والصلبة حيث : تم قياس الخصائص الريولوجية للعينات مثل (الكثافة واللزوجة القصية)، ثم تم قياس انواع اخرى من اللزوجة مثل اللزوجة النسبية , اللزوجة النوعية , اللزوجة المختزلة , اللزوجة الذاتية ، اما معدل اللزوجة للوزن الجزيئي ونصف القطر الجزيئي الفعال فقد تم حسابها نظريا.وكذلك تم قياس الخصائص البصرية مثل (الامتصاصية ومعامل الانكسار)، ثم من هذه الخصائص تم حساب الخصائص الاخرى مثل (النفاذية ، الانعكاسية ، ومعامل الامتصاص للموجات الكهرومغناطيسية ، وزمن العمر الطبيعي، ومعامل الرقة ، الانعكاس المولاري، الزاوية الحرجة وزاوية بروستر).وايضا تم قياس الخصائص الميكانيكية مثل السرعة للموجات فوق الصوتية والتي تم قياسها على تردد ثابت قيمته (25 كيلو هرتز) اما الخصائص الاخرى تم حسابها نظريا , مثل : معامل الامتصاص للموجات فوق الصوتية , زمن الاسترخاء , سعة الاسترخاء , الانضغاطية , معامل المرونـة الحجمي , الممانعة الصوتية النوعـــية .بالنسبة للخصائص الكهربائية تم قياسها مثل التوصيلة الكهربائية ، وبالتالي حسبت الخصائص الاخرى مثل التوصيلية المولارية ودرجة التفكك . وقد تم قياس كل هذه الخصائص لحالتين قبل وبعد الاضافة في درجة حرارة الغرفة .واظهرت النتائج ان الخصائص السابقة تزداد مع زيادة التركيز باستثناء اللزوجة الذاتية ، النفاذية، الانعكاسية المولارية، الزاوية الحرجة، الانضغاطية، التوصيلة المولارية ودرجة التفكك تتناقص مع زيادة التركيز.تم الحصول على نتائج جديدة لمزيج من البوليمر ولقد استخدمت هذه النتائج في جانب من التطبيقات الطبية ، والتي تضمنت الامتصاصية والنفاذية ، وكذلك من ناحية اخرى ، هناك جانب تم تطبيقه وهو ملاحظة تاثير اضافات البوليمرات على بكتيريا جلد الانسان عند استعمال ثلاثة انواع من البكتريا .حيث لاحظنا عدم تاثر البكتريا عند اضافة كل من بوليمر بولي اثيلين كلايكول وبوليمر بولي مثيل ميثاكريليت والمذيب ثنائي الميثيل فورماميد والمستحضر ( بصورة انفرادية) عند اخذ نسبة (1 : 1) لذلك تستخدم كمواد قابلة لامتصاص الاشعة فوق البنفسجية ولاتستخدم كمواد معقمة اما مايخص بوليمر بولي اثيلين اوكسايد فقد لاحظنا تاثر البكتريا به ولمسافة (15) ملم حيث يمكن استخدامه كمادة قابلة لامتصاص الاشعة فوق البنفسجية وكمادة معقمة ويعتبر هذا احد التطبيقات الطبية الجديدة ، لذلك هناك العديد من التطبيقات التجريبية في التطبيقات الطبية المختلفة التي تم الحصول عليها من هذه الدراسة ، مثال على ذلك : عندما نستعمل بولي اثيلين اوكسايد وكذلك عندما نضيف له بوليمر بولي اثيلين كلايكول والبوليمر بولي ميثاكريليت المثيل حيث تم اضافة المزيج الى ثلاثة انواع من مستحضرات التجميل ، وثلاثة انواع من مرهم المفاصل ونوعين من جل الشعر، وهذه المخاليط ادت الى تحسين الامتصاصية عن طريق زيادة امتصاص (الاشعة فوق البنفسجية ) وجعل الجلد اقل تهيجا.ونلاحظ كذلك ان فحوصات (FT - IR) للاطياف اظهرت عدم وجود تفاعل كيميائي بين ( (PEO الذي ووزنه الجزيئي (300000) ومضافاته حيث استخدمت تقنية اقراص (KBr)) لذلك.العلاقة بين الخصائص التي تمت دراستها والتطبيقات الطبية هو الفائدة من زيادة الامتصاصية وتقليل النفاذية حيث ان الفائدة في الاضافة لهذه المراهم للحد من امتصاص الجسم للاشعة فوق البنفسجية، فضلا عن خصائص الريولوجية التي تؤدي لزيادة اللزوجة للمراهم وبالتالي زيادة الكثافة ومعامل الانعكاس مما يقلل من نفاذية الاشعة (الاشعة فوق البنفسجية) للجسم، بالنسبة للخصائص الميكانيكية والكهربائية لوحظ تحسن كبير في هذه الخصائص التي يمكن استخدامها كبحوث وتطبيقات في المستقبل | The dissertation has included study of some physical properties of polymer polyethylene oxide (PEO) dissolved in Dimethylformamide (DMF) with different concentrations ranged from (0.1% - 0.8%) g./ml before and after adding Polymers such as polyethylene glycol (PEG ) and Poly(methyl methacrylate) (PMMA ) of different weights. The rheological, optical, mechanical, electrical properties for samples at prepared by liquid and solid have been studied and the study show : For rheological properties such as : (density and shear viscosity ),has been measured , then other types of viscosities are measured , such as : relative viscosity , specific viscosity , reduced viscosity , intrinsic viscosity. While for viscosity average molecular weight and effective molecular radius have been theoretically calculated. Also the optical properties had been measured such as ( absorbance and refractive index ), then from these properties were calculated optical parameters and optical constants such as ( transmittance, reflectance, absorption coefficient of electromagnetic waves, natural lifetime, coefficient of fineness, molar reflectance, critical angle and Brewster angle ). Also the mechanical properties of ultrasonic wave velocity at a constant frequency (25 kHz) has been measured and other properties were theoretically calculated such as : absorption coefficient of ultrasonic waves , relaxation time , relaxation amplitude , compressibility, bulk modulus , and specific acoustic impedance for ultrasonic waves. For the electrical properties have been measured such as electrical conductivity and other properties such as (molar conductivity and degree of dissociation) have been calculated after that.The results showed that previous properties have increment with the increase of concentration except reduced viscosity , transmittance , molar reflectance ,critical angle, compressibility, molar conductivity and degree of dissociation are decreasing with increasing of concentration . New results were obtained to a combination of polymer and these results have been utilized in the side of medical applications, which included the absorbance and transmittance, in the other hand, the effect of polymer addition on human skin has been applied according to a note , when using three types of bacteria . Where noticed the bacteria is not affected when adding each of the polymer (polyethylene glycol , Poly(methyl methacrylate)) , solvent Dimethylformamide and mixture when taking the ratio (1 : 1) individually , so it is used to absorb ultraviolet rays and not used as sterile . For polymer polyethylene oxide noticed effect on bacteria for distance (15) mm , where it can be used to absorb ultraviolet rays and sterile , this is one of the new medical applications , so there are many experimental applications in different medical applications obtained from this study, such as : The solutions of (PEO) , (PEO - PEG) and (PEO - PMMA) blends that have been added into three types of cosmetics, three types of ointment of joints and two types of hair gel , these blends enhance them by the increase of (UV) absorbance that makes less skin irritation. The (FT - IR) spectra showed that there was no interaction between (PEO) ( 300000 ) and all additives when it has prepared by (KBr) disks technique. The relationship between the properties that have been studied and medical applications in the usefulness increase absorbance and decreases transmittance that has to take advantage of it in the addendum to the ointments to reduce the body's absorption of (UV) rays , as well as rheological properties led to increase the viscosity of ointments and thereby increase the density and reflection coefficient which reduces the transmittance of (UV) rays to the body , for mechanical and electrical properties noticed a significant improvement in these properties, which can be used research and applications for the future

دراسة تطور الجسيمات داخل الغلاف الجوي باستخدام نظام المحاكاة AIRES == Studying of Air Shower Development by AIRES Simulation System

اسم المؤلف: احمد جمعة حبيب سالم الطائي
اسم المشرف: احمد عزيز الربيعي | بتول درعم بلاوة
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تمثل دراسة الاشعة الكونية ذات الطاقات العالية احد اكثر المواضيع تحديا في مجال الفيزياء الفلكية. اذ ان تفاعل الجسيمات الاولية مع نوى ذرات الهواء داخل الغلاف الجوي الارضي تنتج كم هائل من الجسيمات الجوية. في هذا العمل تم اجراء المحاكاة لوابل من الجسيمات الجوية المشحونة (EAS) من خلال التحقق من معاملات التطور الطولي ( عدد الجسيمات المشحونة N واكبرعمق في الغلاف الجوي الارضي Xmax) باستخدام نظام محاكاة لجسيمات الهواء الذي يدعى يرنامج AIRES عند مدى الطاقة (1014 - 1019) الكترون فولت للجسيمات الاولية مثل (الالكترونات, البوزيترونات, البروتونات, جسيمات كاما, نوى ذرات الحديد) وزوايا السقوط (0o, 10o, 30o). ان محاكاة دالة التوزيع الجانبية (LDF) لوابل من الجسيمات الجوية تم اجراؤها باستخدام برنامج AIRES لطاقات اولية مختلفة, جسيمات اولية مختلفة وزوايا سقوط مختلفة. هذه المحاكاة يمكن ان تستعمل لاعادة بناء نوع وطاقة الجسيم المتولد من وابل من الجسيمات الجوية المشحونة والتي سجلت في منظومات عملية متعددة. لقد تم استخدام نموذج هتلر (Hitler's model) في حساب عدد الجسيمات المشحونة واعلى عمق جوي للتطور الطولي في الغلاف الجوي الارضي لعدد من الجسيمات الاولية المشحونة مثل (الميونات, البايونات, الالكترونات, البرتونات, الفوتونات ونوى ذرات الحديد) عند مدى الطاقة المذكوراعلاه الكترون فولت وزوايا السقوط المذكورة اعلاه . ان حساب دالة التوزيع الجانبية تمت باستخدام صيغةNishimura - Kamata Gresien (NGK)) ) ضمن مدى الطاقة المذكوراعلاه وزوايا سقوط مختلفة (0o, 10o, 30o, 40o, 50o, 60o). ولقد تم برمجة هذه الصيغ بلغة فورتران 90 وباستخدام Compaq Visual Fortran (CVF 6.6) ]لاحظ الملحق [A. وتمت المقارنة بين محاكاة التطور الطولي (N and Xmax) باستخدام نموذج SIBYLL الهادروني مع نموذجين هادرونيين مثل.(QGSJET99 and SIBYLL16) وقد اظهرت هذه المقارنة فرصة جيدة لتحديد سلسلة تفاعلات الاشعة الكونية مع نوى ذرات الهواء في الغلاف الجوي الارضي. ان المقارنة بين نتائج الحسابات النظرية ووالنتائج التجريبية لعدد الجسيمات المشحونة واكبر عمق في الغلاف الجوي للجسيمات الاولية مثل (البروتونات ونوى ذرات الحديد) قد اعطت نتائج جيدة ضمن مدى الطاقات العالية المذكور اعلاه. | The study of high energy cosmic rays represents one of the most challenging in the astroparticle physics fields. The interaction of primary particles with atmospheric nuclei produces huge Extensive Air Showers (EAS). In this work the simulation of EAS is performed by investigating the longitudinal development parameters (number of charged particles N and depth of shower maximum Xmax) using a system of air shower simulation which is called AIRES code at the energy range (1014 - 1019eV) for different primary particles like (electrons, positrons, protons, gamma particles and iron nuclei) and different zenith angles (0o, 10o and 30o). The simulation of the lateral distribution function in EAS is performed using AIRES code for different primary energies, different primary particles and different zenith angles. This simulation can be used to reconstruct the type and energy of the primary particles that generated EAS for charged particles that registered with different EAS arrays. Using Hitler's model the estimation of the number of charged particles and depth of shower maximum of longitudinal development in EAS is performed for different primary particles such us (muons, pions, electrons, protons, photons and iron nuclei) at the same energy range and for the zenith angles mentioned above. The calculation of the lateral distribution function of charged particles is fulfilled using Nishimura Kamata Greisen (NKG) formula in the same energy range above and different zenith angles (0o,10o,30o,400,50o and 60o). These formulas have been programmed by Fortran 90 with the aid of Compaq Visual Fortran (CVF 6.6)(see Appendix A). The comparison between the simulated longitudinal development of the number of charged particles and depth of shower maximum using SIBYLL hadronic model with two hadronic models like (QGSJET99 and SIBYLL16) has shown an opportunity for determination of cosmic ray cascade interactions in EAS. The comparison between the theoretical and experimental data of the number of charged particles and depth of shower maximum for primary particles like (protons and iron nuclei) in EAS gave a good agreement within the energy range mentioned above.

دراسة تاثير زاوية الترسيب على الخصائص البصرية والكهربائية لاغشية (SnxTe1 - x) الرقيقة == Study the Effect of Deposition Angle on the Optical and Electrical Properties of (SnxTe1 - x) Thin Films

اسم المؤلف: احمد ابراهيم جواد الحسيني
اسم المشرف: رعد سعيد عبد الراوي
الموضوع العام: علوم الفيزياء
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا البحث دراسة الخصائص التركيبية والبصرية والكهربائية لاغشية ((Sn0.3Te0.7,Sn0.5Te0.5,Sn0.7Te0.3المحضرة بطريقة الترسيب الحراري الفراغي على قواعد زجاجية عند درجة حرارة الغرفة وبزوايا ترسيب مختلفة θ=(0 ̊, 40 ̊, 70 ̊ ) وبسمك (100 ±10 nm) للخصائص التركيبية وبسمك10 nm) (50 ± للخصائص البصرية وايضا بسمك10 nm) (350 ± للخصائص الكهربائية ولدراسة تاثير تغير السمك(250,300,350)nm على الخصائص الكهربائية لاغشية (Sn0.5Te0.5).استخدمت تقنية حيود الاشعة السينية لدراسة الخصائص التركيبية لاغشية ((Sn0.3Te0.7,Sn0.5Te0.5,Sn0.7Te0.3. المرسبة بزوايا ترسيب مختلفة وقد اظهر نموذج الحيود ان جميع الاغشية متعددة التبلور. الحجم الحبيبي يقل بزيادة زاوية الترسيب بينما تزيد كل من كثافة الانخلاعات والمطاوعة المايكروية بزيادة زاوية الترسيب.درست الخصائص البصرية للمدى الطيفي )nm 300 - 900) , ان زيادة نسبة Te يؤدي الى تقليل النفاذية والانعكاسية وزيادة قيمة الامتصاصية.ان زيادة زاوية الترسيب له تاثير واضح في تقليل النفاذية وزيادة الامتصاصية مع ازاحة نحو الاطوال الموجية الطويلة. اما بالنسبة لفجوة الطاقة المباشرة المسموحة فتقل مع زيادة زاوية الترسيب وتزداد مع زيادة نسبة Te .ان قيم معامل الامتصاص ومعامل الخمود تزداد بزيادة زاوية الترسيب في حين تقل قيم كل من الانعكاسية ومعامل الانكسار وثوابت العزل الحقيقية والخيالية مع زيادة زاوية الترسيب.اما الخصائص الكهربائية فان التوصيلية الكهربائية تزداد مع زيادة درجة الحرارة ومعامل سيبك يزداد مع زيادة فرق درجات الحرارة لكل زاوية الترسيب .وان زيادة زاوية الترسيب ونسبة Te له تاثير واضح في تقليل التوصيلية الكهربائية والتيار وزيادة معامل سيبك .وايضزايادة سمك الغشاء له تاثير بزيادة التوصيلية الكهربائية والتيار وتقليل معامل سيبك . | In this research, studies the structural ,optical and electrical properties of (Sn0.3Te0.7 , Sn0.5Te0.5 and Sn0.7Te0.3) thin films prepared by thermal vacuum deposition method on glass substrates at room temperature and different angles of deposition θ = (0 ̊,40 ̊,70 ̊ ) with thickness (100nm ±10nm) for the structural properties and (50nm ±10nm) for the optical properties also a study of the electrical properties of (Sn0.5Te0.5) thin films deposited with different angles of deposition θ =(0 ̊,40 ̊,70 ̊ ) with thickness (250,300,350)nm. The X - ray diffraction technique (XRD) has been used to study the structural properties of (Sn0.3Te0.7, Sn0.5Te0.5 and Sn0.7Te0.3) films deposited at oblique angles and it has appeared that the films are polycrystalline. The grain size decreases with increasing deposition angle, while the micro strain and dislocation density are increased with increasing deposition angle. The optical properties are taken for spectral range (300 - 900) nm. The transmittance decreases with increasing the Te percentage, while the reflectance increases with decreasing Te percentage. The absorptance increases with the increasing of Te percentage. The increasing in deposition angle has an obvious influence in the decreasing of transmittance and increasing of absorptance with shifting toward long wavelengths. The energy gap value decreases with the increasing deposition angle, the allowed direct transition increase with increasing the Te percentage. The absorption coefficient, extinction coefficient and imaginary dielectric constant values are increased with increasing deposition angle, while the refractive index, real dielectric constant values are decreased with increasing deposition angle. The electrical conductivity increases with increasing temperature. Seebeck Coefficient increase with increasing the temperatures difference for all deposition angles. The increasing of deposition angle and Te percentage have an obvious influence in the decreasing of D.C conductivity and current and increasing of Seebeck Coefficient. Also the increasing of thicknesses for all deposition angles have an obvious influence in the increasing of D.C conductivity and current and decreasing of Seebeck Coefficient .The current is increasing in light when it complains with dark

دراسة بعض خصائص فيرايت الاسبنل المحضر بطريقة السيراميك والسول جيل == Studying some Properties of Spinel Ferrite preparing by Ceramic and Sol - Gel Methods

اسم المؤلف: اثير ابراهيم عبد علي الخفاجي
اسم المشرف: كاظم جواد كاظم الشجيري
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: In this research three series of spinel ferrites samples where prepared which is copper - zinc ferrite with general formula (Cu1 - xZnxFe2O4), magnesium - zinc ferrite with general formula (Mg1 - xZnxFe2O4) and nickel - zinc ferrite with general formula (Ni1 - xZnxFe2O4) at (X) values ranging from 0.0 to 1.0, step of 0.2 where (X) represents the proportion of zinc in ferrite, using two preparation methods which is Conventional ceramic method and Sol - Gel method. Three sintering temperatures have been used which is (1000ºC), (1050ºC) and (1100ºC) to determine the effect of sintering temperature on the final specifications of the samples. (Network analyzer device) has been used to studding the microwaves absorption in the range of (X - band) with a frequency range (8 - 12.5 GHz). Also, X - ray diffraction analysis (XRD) has been used to determine the crystal structure and purity of the prepared samples and to calculate the average grain size and micro strain, The samples were examined using a scanning electron microscope device to evaluate the crystal size and to see distribution style after the sintering process, were Also, the density of the prepared samples were measured to calculate the porosity values.The results showed that the best samples with very high absorbency a long the (X - band) is (Mg0.6Zn0.4Fe2O4) and (Cu0.6Zn0.4Fe2O4) at sintering temperature (1100 ºC). This stability and efficiency observed firstly compared with other researches and literatures. Also the resonance peaks for all three types of spinel ferrite appeared at frequencies (8.6, 9.8, 10.0, 10.2, 11.01.11.2, 11.6, 12.0, 12.2) (GHz). X - ray diffraction results showed that all the prepared samples are a poly - crystalline also showed the occurrence of micro strain on the crystals due to effect of the sintering temperature on the crystals.Comparison between the samples prepared by Sol - Gel method and Conventional ceramic method; the result showed the homogeneity of particle size and particle distribution was the best for first method. Whereas the porosity was small for this method

تطوح فقدان الطاقة الجزئي للزركونيا والالومينيا للبروتون وحزم جسيمات الفا == Partial of Energy loss straggling of ZrO2 and Al2O3 for proton and ? - particle beams

اسم المؤلف: ابراهيم عباس ابراهيم الخزرجي
اسم المشرف: رياض خليل احمد العاني
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا العمل اجراء الحساب النظري لمقدار فقدان الطاقة (التطوح) للزركونيا〖(ZrO〗_2) والالومينيا (〖(Al〗_2 O_(3)) لحزم البروتون وجسيمات الفا الساقطة على هذه الاهداف وبطاقات . (T= 0.05, 0.25, 1, 2, 2.5 Mev/u) ان الصيغة لدالة العزل مثل قطب البلازمون التقريبي (PPA) وتعديلاتها من خلال نموذج درود( (Drude - model ، تم اعتمادها لحساب الاحتمالية للبروتونات وحزم جسيمات الفا المسببة للتهيجات الالكترونية في الاهداف المستعملة فقد حسبت مع الاخذ بنظر الاعتبار تاثير طول الحجب (Screening Length) والتي اظهرت توافقا جيدا مع نتائج حسابية تم التوصل اليها في دراسات سابقة، علاوة على حساب قدرة الايقاف الجزئي للشحنة الفعالة ζ(q) (PSPEC) للبروتونات وجسيمات الفا المتحركة خلال اكاسيد مختلفة وبشكل رئيسي بالهدفين المستخدمين في هذا العمل. وكذلك معدل الطاقة < E > ومربع معدل الطاقة للبروتون <〖 E〗^2> تم حسابها ايضا في عملنا الحالي .كما تم كتابة برنامج(Ibrahm - Al2O3.for) بلغة (الفورتران - 90) لاجراء الحسابات العددية موجود نسخة مرفقة منه. | The energy - loss straggling of zirconia (ZrO2) and alumina (Al2O3) has been determined theoretically for proton and alpha - particle beams with incident specific energies (T= 0.05, 0.25, 1, 2, 2.5) (Mev/u). The dielectric formalism like Plasmon Pole Approximation (PPA) and its modified form presentation by Drude - model has been used to calculate the probability for an energetic proton and alpha to produce electronic excitations in target of zirconia (ZrO2) and alumina (Al2O3), taking in consideration screening length effects and good agreement is achieved with previous work. The partial stopping power effective charge (PSPEC) , ζ(q) and partial energy straggling effective charge (PSGEC)η(q) for proton and alpha particle moving through several oxides, namely Al2O3, and ZrO2 have been calculated . Good agreement has been achieved with previous work. Also average energy, <E> and average of square energy <E^2> for proton and alpha particles in Al2O3 and ZrO2 have been calculated in present work.. A program (Ibrahm - Al2O3.for) has been written FORTRANT - 90 for numerical calculation, and a copy of program is available in the present work.

دراسة متانة الربط الانتشاري بين السيراميك والمعادن في الحالة الصلبة == Investigation of the Relaibility of Diffusion Bond Strength Between Ceramic - Metals in Solid State

اسم المؤلف: اروى غازي ناجي الطائي
اسم المشرف: زاريه ازات سركيس | ثامر عبد الجبار جمعة
الموضوع العام: علوم الفيزياء
السنة: 2010
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

دراسة تعجيل الالكترونات باستخدام تفاعل الليزر مع البلازما الممغنطة للاتصادمية == Study of Laser Acceleration of Electrons in a Magnetized Collisionless Plasma

اسم المؤلف: امال محمد كنيوي العكايشي
اسم المشرف: خالد عباس يحيى | محمد عبد الزهراء حبيب
الموضوع العام: علوم الفيزياء
السنة: 2010
الموضوع الدقيق: فيزياء الالكترونيات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: A theoretical and computational investigation was carried out in the field of laser - plasma interaction using the Finite Difference Method to study the acceleration of electrons with non - relativistic velocities in a non - magnetized and magnetized collisionless plasmas.First, a (Nd : YAG) laser pulse of 25 fs duration and 5x1015 W/cm2 intensity was assumed in the present study.When this laser pulse was allowed to interact with a stationary electron in vacuum, it was found that the electron is accelerated during the interaction only and returns to stationary state after the laser pulse has passed, in agreement with previous works.Also, the interaction of the same laser pulse with a collisionless plasma at electron density ne= 1x1018 cm - 3 was studied. It was noticed that the energy of the electron during the interaction has reached a maximum value of ~ 1 keV at laser pulse intensity of 5x1015 W/cm2, while the energy of the electron after the interaction reached ~ 15 eV for the same laser pulse intensity.Finally, the interaction of the same laser pulse with a plasma was studied at electron density ne=1x1018 cm - 3 in the presence of an external magnetic field for the three values of the field strength B= 60 MG, 70 MG and 80 MG. It was found that there is an increase in the acceleration of the electron to reach a maximum energy of ~ 19 keV at a laser pulse intensity of 5x1015 W/cm2 and an applied external magnetic field strength of 80 MG during the interaction. However, the electron energy after the interaction reached ~ 3 keV at a laser pulse intensity of 5x1015 W/cm2 and an applied external magnetic field strength of 70 MG. This is due to a sustainable generated laser wakefield of ~ 2x109 V/cm. Thus, it is concluded that an applied external magnetic field assists the acceleration of the electron and can subsidize for a high laser beam intensity

محاكاة العين البشرية باستخدام الخوارزمية الجينية == SIMULATION OF HUMAN EYE USING GENETIC ALGORITHEM

اسم المؤلف: لؤي عبد الصاحب رسول الطائي
اسم المشرف: سهى موسى خورشيد الاوسي | محمد صاحب الطائي
الموضوع العام: علوم الفيزياء
السنة: 2010
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The aim of this research is simulate an optical system for the human eye using Genetic algorithm. The considered optical characteristics of the optical system simulator include spot size (Z), spot diagram, and effective focal length (EFL). These characteristics are determined with the aid of some mathematical relations, which give the efficiency and accuracy of the adopted optical system design. The work has been performed in two stages : In the first stage, Genetic Algorithem optimization (GA) is used to get the best design by optimizing the optical featurs of the eye elements. The optimal eye design was tested using Zemax software, the test includes estimation of the image quality, and optimal performance for the proposed optical eye system.The second stage was implementing a specially developed software to simulate the behavior of the human eye. The simulator using visual basic 6 and works under Windows operating system, it is able to plot the eye design graphically, and can estimate the considered optical functions to determine the efficiency of the eye simulator.The simulator showed agood results for spot size, spot diagram and EFL, the present work has been gained some credibility when the considered optical functions achieved by the simulator are found compatible with those achieved by Zemax, since the comparison showed a behavioral matching between them, which ensure the correct path of the GA based eye design and the successful proposed eye design.

دراسة الفجوات المصنعة بهيئة عيوب بواسطة الاشعة السينية لمصبوبة المنيوم ومفاصل لحام الفولاذ == X - ray Radiographic Study of Simulated Voids - Like Defects in Aluminum Casting and Welded Joints in Steel

اسم المؤلف: فرقد رشيد سعيد الزبيدي
اسم المشرف: مازن فضيل محروك | ثامر عبد الجبار جمعة
الموضوع العام: علوم الفيزياء
السنة: 2010
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: This project investigates the detection and evaluation of imperfections in internal structures of castings and welded joints by x - ray radiography. Optimum radiography conditions that lead to clear and high contrast image on the radiograph were studied.Equations derived earlier for finding the size and depth of defects in castings were used in this project to test their applicability to a wide range of geometrical parameters used in radiography.The importance of non - destructive testing NDT in industry is discussed. X - ray radiography being one of the NDT techniques, has some privilege over other techniques. For example, welded joints sometimes contain internal flaw or blowholes that may escape detection by other NDT techniques but can not escape detection by x - rays. Two kinds of samples are prepared for radiography. The first sample is aluminum casting through which two different sizes of steel spheres are included. This sample was radiographed from two opposite sides and the x - ray films were analyzed.The second sample is steel plates which are welded by arc welding and then radiographed by x - rays.Imperfections in this sample such as incomplete root penetration, undercut and porosity were detected by x - ray radiography. Different conditions influencing the preparation and radiography of the above samples were studied. The prepared welded sample was radiographed three times for different high voltages (120,140,160) kV respectively with an exposure time of (80) second. The best quality image where the defects can be detected clearly if its size is (5%) of the radiographed object using (120) kV and (140) kV. Moreover the results show that the optimum film gradient was found at (140)kV and the contrast is better than obtained with (120)kV while darkening image was found at (160)kV.In field of the aluminum casting, the two equations were derived earlier proved their capabilities as a right method for identification each of size and depth of such defects in castings and welded joints

دراسة قدرة الايقاف والمدى للبروتونات == Study of Stopping Power and Range for Protons

اسم المؤلف: مصطفى عبد المحسن عبد العالي
اسم المشرف: محمد احمد صالح
الموضوع العام: علوم الفيزياء
السنة: 2009
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The calculation of the value of stopping power and the range for the proton is done by two ways : first, using Bethe - Bloch formula and second, using Bragg - Kleeman rule. The differences between the experimental and theoretical values of stopping power and range required studying the corrections for Bethe - Bloch formula which are represented by the maximum energy and density correction and then comparing the results with experimental values. Using these two formulas it has been found that the results computed by the Bethe - Bloch formula without corrections (maximum energy and density correction) are in agreement with experimental results for βγ ≤ 2 ( E ≤ 2×103MeV ) and for βγ ≤ 102 ( E ≤ 105MeV ) with corrections. The maximum energy and density corrections contributed to decrease the difference with the experimental results for βγ ≥ 102 ( E ≥ 105MeV ).The values of stopping power computed using the Bragg - Kleeman rule are in agreement with experimental results for E ≤ 200MeV and the range values computed using the Bragg - Kleeman rule are in agreement with the results computed using the Bethe - Bloch formula for E ≤ 400MeV .The results show that the energy losses for protons at the high energy values are low and vise versa; the energy losses for protons at the low energy values are high.The present calculations confirm that the proton looses its largest energy at the end of its path in matter

تاثير المعاملة الحرارية على بعض الخواص الميكانيكية للمتراكب المنيوم - كاربيد البورون == Effect of heat treatment on some mechanical properties of Aluminum - Boron carbide composites

اسم المؤلف: لمى جمال عباس الرماحي
اسم المشرف: قاصد عبد الستار صالح الجنابي | سعد رحمة الله
الموضوع العام: علوم الفيزياء
السنة: 2012
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Aluminum matrix composites reinforced with boron carbide are currently employed in the nuclear industry. It's used as a control rod in nuclear reactors; Since B4C has very high absorption cross section for thermal neutrons. The objective of this work is to study the effect of heat treatment on the mechanical properties of the Al - B4C metal matrix composites prepared by powder metallurgy techniques. Compressibility was measured with the Al powder. The chosen compaction pressure was 2500psi. Samples were prepared by adding 5%, 10%wt B4C to Al as well as the Al powder. Sinterability was evaluated at different temperatures (400,450,500,550,600,650°C) during 2, 4, 6, 8; 10 hr for soaking time.Mechanical test were evaluated, showed little improvement in hardness, compressive strength and young's modulus in temperatures 400,450,500,550°C, and significant improvement in hardness and compressive strength in temperatures 600and 650°C, and also improvement to the elastic modulus. Specific samples were irradiated by neutron source, and mechanical tests showed little decrease in their mechanical properties (hardness and compressive strength) due to low neutron fluence available that gives insignificant effec

قياس تركيز باعثات الفا في الادرار البشري باستخدام كاشف الاثر النووي في الحالة الصلبة PM - 355 == Determination of alpha emitters concentration in human

اسم المؤلف: شيماء ذياب عطية العبودي
اسم المشرف: مازن مانؤيل الياس | ندى فاضل توفيق
الموضوع العام: علوم الفيزياء
السنة: 2006
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: This work owes its importance to the fact that it aims at knowing and measuring the concentrations of alpha - particles emitters discrete by the human body in the urine in particular. Knowledge of these concentrations is extremely important since it reveals whether a person has received such doses of radioactive materials emitting alpha - particles that result in the occurrence of malignant tumor and mutations. This subject being so essential to the health of individuals and being a great help to physicians to make the proper diagnosis in the relevant cases, has imposed itself on us as the topic of this thesis. Human urine samples were taken from Iraqi workers in different fields (phosphate plants, fertilizer plants, teaching staff in nuclear physics laboratory, painters, patient and reference healthy people of different ages), using PM - 355 solid state nuclear track detectors. The exposure method was used by immersing PM - 355 detectors in urine samples for three weeks, then etching by 6.25N NaOH for 5 hrs. The track density was measured via an optical microscope. The alpha emitters concentrations in the urine samples were calculated in comparison with standard samples that were prepared in the nuclear laboratory of physics department - College of Science AL - Nahrain University.The obtained results show that the concentrations of alpha emitters in the urine samples of patients range from 1.81ppm to 2.87ppm , from 0.087ppm to 1.32ppm in reference healthy people, in painters from 0.77ppm to 1.46ppm,workers in phosphate plants from 0.94 ppm to 1.89 ppm, workers in fertilizer plants from 1.0ppm to1.42 ppm , and from 1.0 ppm to 1.29 ppm in teaching staff in nuclear physics laboratory .Deductions from the results of this work regarding the dependence of concentrations on the person&#39;s occupation, years of service, sex, age and health condition have been dealt with in sufficient details as required.

اثر التلدين على الخواص البصرية لاغشية اوكسيد الالمنيوم (Al2O3) الرقيقة المحضرة بطريقة الترسيب الكيميائي الحراري == The effect of annealing on the optical properties of (Al2O3) thin films prepared by chemical spray pyrolysis

اسم المؤلف: عبير كمال جعفر
اسم المشرف: خضير عباس مشجل | ابتسام محي عبد العزيز
الموضوع العام: علوم الفيزياء
السنة: 2009
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The recent study deal with the structural and optical properties of Al2O3 thin films prepared by the chemical spray pyrolysis technique at glass substrate(450°C) and studying the effect of annealing at different temperatures (500,550,600) °C on the optical properties.The results of X - ray diffraction showed that the prepared films are polycrystalline, the study of optical properties included the record of transmittance spectrum of the films with the wavelengths range from (300 - 900)nm, and then measuring the forbidden energy gap of electronic transitions where it was found that the values of the forbidden energy gap of both allowed and forbidden transitions are (3.4)eV and (2.5)eV successively and it was (1.6)eV for the allowed indirect transition. When annealing the Al2O3 thin films, the values of the forbidden energy gap of the allowed and forbidden of direct transitions are (2.7)eV and (3.6)eV and it is (1.9)eV for the allowed indirect transition. Also, absorption coefficient , reflectance and optical constants such as extinction coefficient, refractive index, dielectric constants with it's two parts real and imaginary and optical conductivity as a function of photon energy have been studied, the study showed that the annealing caused an increase in energy gap values, reflectance, transmittance, refractive index and real part of dielectric constant, and a decrease in the values of absorptance, absorption coefficient, extinction coefficient, imaginary part of dielectric constant and the optical conductivity.

نموذج بطارية باستخدام برامجيات PSPICE مع مغير شحن ثنائي الاتجاه == Pspice Battery Model with Bidirectional Charging Converter

اسم المؤلف: زينة موفق قدوري حسين العزاوي
اسم المشرف: زينب منذر يونس كبة
الموضوع العام: علوم الفيزياء
السنة: 2008
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: This research intents to design Bidirectional Converter that can be used in wide applications from uninterrupted power supplies (UPS), photovoltaic (PV) and battery charging and discharging system, to auxiliary power supplies designed primarily with a general module depending on Orcad PSPICE program.Lead Acid battery model (12V) is putted, which is used in wide applications. The model consists of charge efficiency and battery voltage components. The charge efficiency factor can vary from (0 to 1) and is dependent on the Battery State of charge and charge current. The voltage component of the model consists of amp - hour integrator which tracks the net current flowing into the battery terminal (Battery voltage). The output of the integrator gives us the state of charge so, it is connected to a table driven voltage source, ETABLE, which generates the equivalent open circuit battery voltage. The method used here is implemented in orcad PSPICE program with bidirectional converter of properties (D=0.4, P=12W, Vo=12V, f=1 KHz, Io=1A).

دراسة لجودة الصورة للعين البشرية == A Study of the Image Quality for Human Eye

اسم المؤلف: ازهار عويد كاظم
اسم المشرف: صلاح عبد الحميد صالح
الموضوع العام: علوم الفيزياء
السنة: 2008
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The study of the effect of some factors on the human is difficult and complex because of the lack of instruments for measuring eye efficiency.The human eye is an optical organ, its work is similar to the camera work, but the eye can not return the image which it makes, but the camer a can return. Producing high quality image by human optical system like other lens system is affected by many parameters, some of them are internal such as aberrations and age, pigmentation. Also human eyes suffer from some defects that effect the human eye image quality, some of these defects are : 1. Hypermetropia (Long sightedness)2. Myopia (short sightedness) 3. Some other defects The optical characteristics of human eye imaging system are studied quantitatively via experimental and computer modeling. Experimental work is carried out to study the effect of spatial frequencies, color and ages on image eye quality. Computer simulations models are carried out to study the limitations imposed by imaging in the human eye. Theselimitations include the diameter of pupil eye, the aberrations (astigmatism and spherical), age, and pigmentation of eye. These limitations are computed in terms of modulation transfer function (MTF).The results showed that MTF curves are suitable for determining image quality and the limitions effect on imaging system. Also result showed a coincidence between laboratory work and theortical calculation of MTF for age, pigmentation, pupil size and aberrations

ميكانيكية الانتقال الالكترونية لثنائي شوتكي Al/c - Si/M == Electronic Transport mechanism of Al/c - Si/M Schottky Diodes

اسم المؤلف: رسل عبد السادة عزوزعبود
اسم المشرف: حسين خزعل رشيد | طالب سلوم حمادي
الموضوع العام: علوم الفيزياء
السنة: 2008
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هدا البحث تحضير معدن - شبه موصل باستخدام تقنية التبخير الحراري بالفراغ,حيث استخدمنا اغشيه رقيقه من الانديوم والفضه والذهب والالمنيوم .حيث تم معامله الثنائيات Al/c - Si/Inو Al/c - Si/Ag وAl/c - Si/Au حراريا بدرجات تلدين مختلفة( 303, 373، 473) كلفن. التوصيل الاومي لهذه الثنائيات كان من معدن الالمنيوم بسمك 0.2مايكرومتر اما معادن اتصال شوتكي فقد كانت بسمك(0.1, 0.2) مايكرومتر وضغط تبخير بحدود 10 - 5 ملي بار. تم في هذا البحث ايضا دراسة تاثير حرارة التلدين وتغيير دوال شغل المعادن على الخصائص التقويمية للثنائيات عن طريق دراسة خصائص تيار - جهد ومتسعة - جهد لتلك الثنائيات, وقد لوحظ بان هناك تحسن بالخصائص التقويمية للثنائيات (انخفاض في عامل المثالية وفي كثافة تيار الاشباع العكسي). واظهرت الدراسـة ان كثافة تيار الاشباع Js)) وحاجز الجهد (ΦB) وعامل المثالية (n) تم حسابها باستخدام خصائص تيار - جهد ذات المقياس اللوغارتمي لاحـداثـي التيار. بينت خواص تيار - فولتية للثنائيات Al/c - Si/Inو Al/c - Si/Ag وAl/c - Si/Au بان تيار الظلام الامامي يتغير اسيا تقريبا مع فولتية الانحياز وهذا يتفق مع نموذج اعادة الاتحاد - الانتفاق ولوحظ نقصان تيار الظلام بزيادة السمك. ومن خلال قياسات تيار - فولتية تحت ظروف الاضاءة وجدنا ان التيار الضوئي يزداد مع زيادة درجة حرارة التلدين ويقل مع زيادة السمك . درست خصائص السعة - الجهد للتراكيب الثنائية Al/c - Si/Inو Al/c - Si/Ag ما عدا Al/c - Si/Au بسمك 0.2 مايكرو متر وبدرجات تلدين مختلفة. حيث قيست سعة الانحياز العكسي كدالة لفولتية الانحياز وبتردد 1 ميكاهيرتز وقد دلت هذه النتائج على ان السعة تقل بزيادة جهد الانحياز العكسي، وبزيادة السمك ودرجات حرارة التلدين. قيم جهد البناء الداخلي(Vbi) ، حاجز الجهد (ΦBp) وتركيز الحاملات (Na) تم حسابها باستخـدام علاقـة شوتـكي - موت] C - 2 vs. V [. اظهرت قياسات التوصيليـة المستمرة وباستخـدام علاقة ارهينوس] lnσ = f(103/T) [ وجود طاقاتي تنشيط Ea1وEa2 والقيم المحسوبه تشير الى ان طاقات التنشيط تزداد بزيادة درجه حراره التلدين .اظهرت قياسات التوصيليـة المستمرة وباستخـدام علاقة ارهينوس] lnσ = f(103/T) [ وجود طاقاتي تنشيط Ea1وEa2 والقيم المحسوبه تشير الى ان طاقات التنشيط تزداد بزيادة درجه حراره التلدين . | Metal - semiconductor (M - S) junctions are prepared in this study by thermal evaporation technique, in which we used indium (In), silver (Ag) and gold (Au) films and aluminum (Al) films. The Al/c - Si/In, Al/c - Si/Ag and Al/c - Si/Au diodes heat treated at different annealing temperatures 303,373 and 473 K. The ohmic contact was aluminum with thickness of about 0.2 µm and the Schottky contacts were indium, silver and gold with thickness of (0.1, 0.2) µm under vacuum conditions of about 10 - 5 mbar. The effects of annealing temperatures and work functions have been studied by current - voltage and capacitance - voltage characteristics. The I - V characteristics showed that the rectification properties of all prepared diodes were improved with increasing the annealing temperature and the metal work functions (the ideality factor and the saturation current density decreased). The ideality factor (n), saturation current density (Js) and the barrier height (ΦB) were calculated using I - V plots with semilogarithmatic scale. The current - voltage characteristic of Al/c - Si/In, Al/c - Si/Ag and Al/c - Si/Au junctions showed that the current varies approximately exponentially with applied voltage and the junction was coinciding with recombination - tunneling model, the dark current decreases with increase of the thickness. Under illumination, the photocurrent increases and decreases with increase of annealing temperatures and thickness, respectively. The C - V characteristics of Al/c - Si/In and Al/c - Si/Ag diodes have been prepared at different thickness except Al/c - Si/Au at thickness equal to 0.2µm and annealing temperatures. The reverse bias capacitance was measured as a function of bias voltage at frequency 1 MHz; the capacitance decreases with increasing the reverse bias voltage, also with increasing of thickness and annealing temperatures. The built - in voltage (Vbi), barrier height (ΦB) and the carrier concentration (Na) were calculated using Mott - Schottky plot (C - 2 vs. V). The d.c. conductivity measurements using Arrhenius plot (lnσ=f(103/T)) showed that there are two activation energies Ea1,Ea2.The electrical activation energies increase with increasing annealing temperatures.

طريقة مطورة لتحديد السرعة النصف قطرية للطائرة ‏باستخدام ازاحة دوبلر == An improved method for the determination of ‎airplane radial velocity using Doppler shift

اسم المؤلف: جزيل حسين عزيز
اسم المشرف: لؤي ادور جورج | ليث عبد العزيز العاني
الموضوع العام: علوم الفيزياء
السنة: 2008
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا البحث تم تقطيع الملف الصوتي للطائرة المتحركة الى عدة مقاطع متساوية باستخدام النافذة المتشابكة, ثم بعدها تم تحويل كل مقطع من المجال الزمني الى المجال الترددي باستخدام تحويل فورير السريع0للحصول على الترددات المميزة تم استخدام النافذة المتحركة والتي يتناسب حجمها مع قيمة الترددات التي تم ملاحقتها, وهذه الالية تجعل من العمل يختلف عن العمل السابق الذي تم فيه استخدام نافذة ذات عرض ثابت في ملاحقة الترددات المميزة0 اذ تم اعتماد خوارزمية في انتقاء الترددات المميزة,وتعتمد هذه الخوارزمية على الترددات التي تخضع لقانون دوبلر بحيث ان ازاحة دوبلر تتناسب طرديا" مع قيمة الترددات المميزة, كذلك ان الترددات التي تم ملاحقتها هي الترددات الاكثر ظهورا" في طيف القدرة0لقد تم استخدام عدة احجام للنافذة المتشابكة من اجل دراسة تاثير تغير حجم النافذة على دقة ايجاد السرعة النصف قطرية للطائرة ومقارنتها مع النافذة غير المتشابكة0 تمت مفاضلة دقة النتائج من خلال عاملين هما : الاول، تقارب المنحنيات المرسومة للسرعة النصف قطرية كدالة للزمن للحالتين النافذة غير المتشابكة والمتشابكة، حيث كلما كانت المنحنيات متقاربة اكثر كانت النتائج افضل. والعامل الثاني، هو قيم مربع معدل نسبة الخطا لخطية العلاقة بين ازاحة دوبلر والترددات المميزة حيث انه كلما كانت قيم مربع معدل نسبة الخطا قليلة كلما كانت النتيجة افضل وهذا يعني ان الترددات المميزة الناتجة من الحسابات ستحقق معادلة دوبلر بشكل افضل0 كذلك تم استخدام ثلاث ازمان للمقطع الصوتي وهي (0.1ثا) و(0.15ثا) و(0.2ثا) ومن خلال النتائج التي ظهرت وجد ان الزمن (0.2ثا) لطول المقطع الصوتي يعطي نتائج افضل من بقية الازمان. بالاضافة الى ذلك تم اختبار عدة قيم لعرض النافذة وهي (0.01) و(0.03) و(0.05)، وقد وجد ان افضل قيمة لعرض النافذة هي (0.05). كما وجد ان نتائج استخدام النافذة المتشابكة افضل من استخدام النافذة غير المتشابكة0 | In this research the sound file recorded for a moving airplane has been sliced into several frames using overlapped window. Then the array of each frame is transformed from the time domain into frequency domain using Fourier Transform (FT).To determine the characteristic frequency of the sound, a moving window technique was used, the size of that window is made proportional with the values of the tracked frequencies, the use of this adaptive window makes the difference with a previous research work conducted for the purpose, in that work a fixed - size window is used to track all characteristic frequencies.An algorithm was established to select the characteristic frequencies, this algorithm allocates the frequencies which satisfy the Doppler relation, beside that the tracked frequencies was chosen to be the most occurred frequencies in the power spectrum. Several sizes of the overlap windows have been tested to study the effect of window size on the accuracy of the determined radial velocity of the moving airplane. The obtained results have been compared with the corresponding results of non overlapped window.The accuracy of the results was assessed using two criterion, the first is the closeness of the curves of the determined radial velocities versus time for the case of overlapped and non - overlapped window; the closer curves indicate better results. The second used criteria is the Root Mean Square Error (RMSE), which is used to determine the linearity of the relationship between Doppler shift and characteristic frequencies, the least values of (RMSE) signify better results are obtained. Three values of the frame size have been tested; they are 0.1s, 0.15s and 0.2s. From the attained results it was found that the frame size 0.2s gives better results than the other tested sizes. In addition several values of window size have been tested; they are 0.01s, 0.03s and 0.05s, the best value is found 0.05s. Also the results indicated that the use of overlap window gives better results than the case of using non - overlap window.

حسابات الامثلية لمنظومة مغاطيسية تتالف من حارف وعدسة == A Computational Optimization of Magnetic System Consists of Deflector and Lens

اسم المؤلف: احمد حسين علي
اسم المشرف: احمد كمال احمد | عدي علي حسين
الموضوع العام: علوم الفيزياء
السنة: 2008
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: A computation investigation on the design of magnetic deflection and focusing system using the synthesis approach of optimization method has been done. By solving the paraxial ray equation using the Range - Kutta - Nystrom method the trajectories of the electron beam and the optical properties of the magnetic deflection and focusing system under infinite and zero magnification conditions has been computed.The synthesis approach of optimization method is used in the present work to finding the optimum design of magnetic deflection and focusing system which give rise to the minimum spherical, chromatic, spiral distortion, and radial distortion aberration.The toroidal deflection coil is used as the source of magnetic field, and then the field distribution is determined by using an exponential function. The moving objective lens concept is included in the computation of system field

تطبيقات الانموذج العنقودي المزدوج في الانوية الخفيفة == APPLICATIONS OF COUPLED CLUSTER MODEL IN LIGHT NUCLEI

اسم المؤلف: علياء حسين السباهي
اسم المشرف: ليث عبد العزيز العاني | سعد ناجي عبود
الموضوع العام: علوم الفيزياء
السنة: 2007
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: احد الاكتشافات التي حدثت مؤخرا في الفيزياء النووية هي وجودالانوية السحرية(Halo nuclei). الانوية السحرية هي انوية ضعيفة الترابط حيث قلب النواة مع كثافة نووية طبيعية محاطان بمنطقة من مادة نووية مخففة كما في (كالنيوترون السحري). مثل هذه النوى تتواجد بكثافات خفيفة اوثقيلة, ان هذه الانوية موضوع بحث عدد كبير من الدراسات النظرية وكذلك العملية لغرض فهمها بطريقة اكثر وضوحا. ولهذا لوحظ خلال السنوات العشر السابقة اتسعت دراسة هذه الانوية. وفي هذه الدراسة تم فحص عدد من الانوية السحرية ومعالجتها بعدة طرق وايجاد بعض الخصائص الفيزيائية لهذه الانوية. في هذه الاطروحة تم فحص تركيب النوى السحرية الخفيفة من خلال الانموذج المجهري المتغير, هذا الانموذج هو عبارة عن توسيع لعمل سابق عن القشر المغلقة. تم استخدام الانموذج العنقودي المزدوج في هذه الاطروحة بالاعتماد على جسيمة الفا كاساس في الانموذج العنقودي وكذلك النيوترونات التي تظهر من خلال هذا الانموذج. كما تم معالجة الدالة الموجية بطرق التغاير وطريقة جاسترو للوصول الى دالة موجية اختبارية مقاربة الى الدالة الموجية الحقيقية.الدالة الموجية نحصل عليها من حالة االمصدر والتي تتضمن المتناظرات المطلوبة وتقدم وصف انتقالي (ثابت) للنظام يشكل عناقيد متعددة وغير مترابطة بعد ذلك نستخدم المؤثرات المترابطة ( بنوعيها المدى المتوسط الى الطويل الخطي والمدى القصير اللاخطي ) للحصول على دالة موجية جديدة, كم ان الدالة الموجية في الانموذج العنقودي تسمح بوصف الحركة الاهتزازية بين التجمعات داخل النواة. ان اهمية هذه الطرق تكمن في ايجاد حل لمعادلة شرودنكر كما تم الاعتماد على تفاعل نوية - نوية شبه الواقعية للوصول الى الجهد المطلوب, وان هذا البحث يتطابق مع مبدا باولي للاستبعاد. كما تم استخدام طريقة مونتي كارلو في هذا البحث وذلك لانها تمتاز بدقة رقمية عالية.وتولي اهتمام عالي لمتطلبات الانموذج الدقيقة. "والافضل استعمال المترابطات بحالة عشوائية كما يجب الاخذ بنظر الاعتبار تقدير الاخطاء بصورة اكثر دقة"في هذه الاطروحة تم استخدام الانموذج لفحص الانوية التالية : (5He,6He,8Be,9Be) وايجاد بعض الخصائص الفيزيائية لها من خلال ايجاد توزيع الكثافة لجسيم واحد ولجسيمين. بعدها نحصل على صورة نوعية لتوزيع المادة في النواة التي نحصل عليها وتجهيز تحليل معين لحالة مقيدة واحدة تتطلب قوة المدار - البرم في خطة مزدوج ( S - L ) ستظهر لنا انموذج قادر على انتاج حالات مقيدة يقترح لانظمة القشر المفتوحة بشكل اصطناعي لتعديل االتعبير المركزي للتفاعلات شبه الواقعية المستخدمة. كما تم ايجاد علاقة الطاقة مع عرض القشرة, وكذلك ايجاد سلوك النواة من خلال ايجاد العلاقة بين الطاقة والمسافة الى مركز كتلة جسيمة الفا. (5He ,8Be) هي انوية سحرية , نلاحظ السلوك العام للطاقة تقترب للحد الادنى وهذه يمكن ملاحظتها من المعدل الكروي لتوزيع الكثافة لجسيم وجسيمين,اما الانوية الخفيفة (6He,9Be) هي انظمة للقشر المفتوحة . في هذه الاطروحة تم كتابة البرامج باستخدا لغة الفورتران (77). | One of the recent discoveres in nuclear Physics is the existance of Halo nuclei . Therefore, halo nuclei are very weakly - bound exotic states of nuclear matter in which the outer one or two valence nucleons (usually neutrons), and a nuclear core with normal nuclear density is surrounded by a region of dulite nuclear matter, referred to as the neutron halo. Such nuclei occur from light to heavy masses and have been the subject of a alarge number of theoretical studies to try and understand them. A number of theoretical models have been proposed over the years. In this thesis the structure of light halo nuclei is examind through a fully microscopic variational model, where the Pauli exclusion princple explicity satisfied and semi - realistic nucleon - nucleon interactions are used. The model is an extension of previous work of closed shell nuclei. The wavefunction is obtained from a starting or reference state, which includes the required symmetries nd provides a translationally invariant description of the system in terms off several uncorrelated clusters. Medium to long - rang linear and short - range non - linear corrlation operators are then applied to obtained a good wavefunction, these models are important to solve the Shrodenger equation. The model developed is then used to examine the nuclei , , and . By making use of one - and two - body density distributions a qualitative picure of the matter distribution in the nucleus is obtained. The analysis provided indicates for a bound state one requires spin - orbit force, something that we don’t include. Nevertheless working in the L - S coupling scheme have shown that our model is capable of producing bound states for open - shell sysytems by artificially altering the central term of the semi - realistic interactions in use. And to find the relashonshipe between the energy and the width of shell, and find the behavioer of nuclei from throught the relation between energy and distance to the center of mass of alpha partical, 5He and 8Be are known halo nuclei. The general behaviour obtained was that the energy approached a minimum, as the separation between the several constituents increased. This could be monitored by observing the spherically averaged one - and two - body density distributions. We could clearly see that the energy was minimized as the one - body distribution broadened with the center shifting a way from the origin. The two - body density distribution separated into two parts : a main body similar to the alpha - particle and a small tale effect. We used algorithmic scaling in order to distinguish the two parts. Despite the fact our interaction is not adequate for the light halo nuclei of 6He and 9Be we demonstrated that our model can produce bound state for such open - shell systems by modifying the inter - nucleon force.in this thesis used programes in Fortran (77).

برنامج حسابي لحساب بعض خواص التراكيب البلورية == A Computational Program to Determine Some of Crystal Structure Specifications

اسم المؤلف: لينا حسين علي
الموضوع العام: علوم الفيزياء
السنة: 2008
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: البرنامج الحسابي crystal - 2 المصمم بلغة فيجول بيسك 6 صمم وطبق لتعريف خصائص ثلاثة انواع من البناء البلوري يتضمن قياس الابعاد البلورية(a, b, c) , الزوايا المحورية (α, β, γ) ,متوسط حجم الحبيبة (AGS) , نسبة الملئ (FF) والاجهاد المرن (ε) . هذا البرنامج سوف يعطينا وصف كامل عن البناء البلوري لثلاثة انواع من البناء البلوري للمواد المستخدمة بواسطة ادخال المعلومات من البيانات التي تتضمن زاوية الحيود (2θ) ومعاملات ميلر hkl للمواد المستخدمة مثل كبريتيد الكادميوم (CdS) والبريليوم (Be) ومقارنة القيم المحسوبة مع القيم النظرية للبيانات المدخلة للمواد المستخدمة.كما انه تم قياس (AGS) بواسطة استخدام نظرية شيرر وعامل المرونة بواسطة استخدام نظرية هول ويليامسون للمواد المستخدمة مثل كبريتيد الكادميوم . | Computational program &#34;Crystal - 2&#34; in Visual Basic 6.0 was designed and applied to identify the specification for three crystal structures includes the lattice parameters (a, b, c), the axial angles (α, β, γ), the Filling Factor(FF) foe CdS, the Average Grain Size (AGS) for CdS, and the Elastic Strain (ε) for CdS and CdTe. This program will give us a complete description on crystal structure for three crystal structures material by inserting a data which include the values of Miller indices (hkl), the diffracted angle (2θ) from ASTM data for cadmium sulfide, beryllium and compare the calculated values with the values of ASTM data used material. This program is includes many special calculations for a certain material such as cadmium sulfide that used to examine the cubic system and calculated lattice parameters were found to be a ≈ 5.82 Å, b ≈ 5.83 Å and c ≈ 5.81 Å and there is a drift error about D ≈ 4.365314 10 Å when is compared with the published values, and to examine orthorhombic system by using ASTM data for cadmium sulfide as example the calculated values were found to be a ≈4.169 Å, b ≈ 2.791 Å and c ≈ 5.413 Å, with a drift error about D ≈ 8.28014 10 Å, also the tetragonal system is also examined for beryllium and the calculated values were found to be a ≈ 1.36 Å, b ≈ 1.36 Å, and c ≈ 3.58 Å with a drift error D ≈ 5.743535 10 Å, and the average grain size is also calculated for CdS by using the Scherrer&#39;s formula ,the filling factor is determined for Cadmium Sulfide, and the elastic strain by using the Hall - Williamson method for CdS and CdTe

ترميم الصور باستخدام تقنيات محورة غير خطية == Image Restoration Using Adaptive Nonlinear Techniques

اسم المؤلف: محمد خضير كاظم
اسم المشرف: اياد عبد العزيز العاني | صلاح عبد الحميد صالح
الموضوع العام: علوم الفيزياء
السنة: 2008
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Image restoration is the process of finding an approximation to thedegradation process and find appropriate inverse process to estimate theoriginal image.An iterative restoration technique(Tikhonov method) was adapted.The adapted filter was designed for restoring RGB satellite images thatare blurred with space - invariant point spread function, Gaussianfunction, and corrupted with additive noise, and salt & pepper noise.Different degradation parameters, i.e. different signal to noise ratio wereconsidered and different noise density.The results using an adaptive filter were compared,quantitatively, with different types of conventional restoration techniques,(such as inverse filter, Least - Squares filter (Wiener Filter), andConstrained Least - Squares filter) using Mean Square Error (MSE).Results show that The Mean Square Error of the restored imagesdecreases with increasing the number of iteration until the resultconvergence. Also the ratio of the MSE of the degraded image to therestored image will increase with decreasing SNR for Gaussian noise,and with increasing noise density for salt and pepper noise respectively,then Results show this method has better performance for restoring thedegraded images, especially for low signal to noise ratio, and for highnoise density.

استخدام تحويل الجيب تمام لتشفير حزمة التحويل المويجي التقريبية == Using Discrete Cosine Transform to Encode Approximation Wavelet Subband

اسم المؤلف: سارة عدنان محمود
اسم المشرف: لؤي ادور جورج
الموضوع العام: علوم الفيزياء
السنة: 2008
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Various compression methods have been proposed to achieve high compression ratios and high image qualities in low computation time relatively. In this research work a combined transform coding scheme was proposed, the adopted system utilize both Discrete Cosine Transform and Wavelet transform. The advantages of both transforms were taken into consideration to encode the image. First, the system transform the color components of the image from (RGB) to (YUV), the U and V bands are downsampled due to their poor spatial resolution, and then the wavelet transform is applied on each color band separately. Some spatial coding steps are applied on detail coefficients (like hierarchal uniform quantization, Run Length Encoding (RLE), shift coding) to gain more compression. The approximate coefficients are coded by using (DCT), uniform quantization, shift coding.Also, some analysis tests were done to study the performance of the established system, and the effects of the involved coding parameters on the system were investigated. The test results indicated that the proposed scheme give high compression ratio and good fidelity measures (MSE and PSNR). Moreover, the proposed scheme was found need 0.7 second to compress color images of size (256x256) without making significant degradation in image quality.

التحليل وتطبيق بواسطة الحاسبة للخلية الكهروضوئية في المغير المستمر == A Computer Simulation and Application of PV cell on DC - DC Converter

اسم المؤلف: زيد سمير جبار السامرائي
اسم المشرف: زينب منذر يونس كبة
الموضوع العام: علوم الفيزياء
السنة: 2008
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: المنظومات الكهروضوئية تولد الكهرباء بواسطة التحويل المباشر للطاقة الشمسية وتعتبر نظام متكامل بسبب كونها مركبة من مجموعة قطع من العناصر. الدراسة النظرية للانظمة الشمسية وتقنيات انشاء موديل لها باستخدام دوائر كهربائية مكافئة كذلك خصائص الخلية الشمسية ستكون مطروقة في هذا البحث. الموديل الجديد للخلية الشمسية سيتم تحقيقه باستخدام برنامج التحليل pspice. الفولتية المثالية كانت 17volt والتيار المثالي كان 4.41A. هذا الموديل سيستخدم في المغير المستمر والذي يمتلك المواصفات التالية، فولتية خرج متغيرمن (1.5V - 12V)، التردد المفتاحي 20kHZ ، دورة الفرض (0.1 - 0.7)، وقدرة الخرج من (1W - 41.6W). المنظومة مصممة ومفحوصة بواسطة برنامج التحليل pspice. تطبيقات موديل الخلية الشمسية والبطارية ستنفذ في المغير المستمر. نتائج التحليل للمغير التي حصلنا عليها من كلا المدخلين اعطت توافق كبير في قيم النتائج. | Photovoltaic system generates electricity by the direct conversion of the sun's energy and it is a modular system because it is built out of several pieces of elements. The theoretical studies of PV and modeling techniques using equivalent electric circuits carried out and the characteristics of PV cell have been investigated. The new model of PV implemented in pspice program, the optimum voltage was (17volt) and optimum current was (4.41Ampere). This model is used in the DC - DC converter which has the following characteristics, the variable output voltage is (1.5V - 12V), switching frequency (20 kHz), duty cycle (0.1 - 0.7) and the output power (1W - 41.6W), the system has been design and tested by pspice program. The application of PV and battery implement in the DC - DC converter, the results of the converter simulation obtained from both two input show a good agreement.
1 ... 73 74 75 76 77 ... 117