Show: 25 50 75 100 Results

Search results: 25 out of 3,267

دراسة بعض الخواص الفيزيائية للايبوكسي المدعم بدقائق نانوية == STUDY OF SOME PHYSICAL PROPERTIES OF EPOXY REINFORCE WITH NANO PARTICLES

Author name: صفاء عبد صالح
Supervisor name: وداد حمدي جاسم
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: تم استخدام مادة الايبوكسي (EP) مع نسب خلط حجمية مختلفة (1, 2, 3, 4, 5, 7, 10, 15 و20%) من الجسيمات الزركونيا ( 2(ZrO والمغنيسا ( MgO) النانوية ومن الجسيمات 2 ZrO وMgO المايكروية لتحضير متراكبات الايبوكسي النانوية ومتراكبات الايبوكسي المايكروية لفحص ودراسة بعض من خصائصها الميكانيكية (متانة الانحناءومعامل الانحناء ومتانة الكسر وقوة الصدمة والصلادة ) والخواص الكهربائية العزلية ( ثابت العزل الكهربائي وزاوية ظل الفقد والتوصيلية الكهربائية) والخواص الحرارية (التوصلية الحرارية ودرجة الانتقال الزجاجي)طريقة تحضير عينات الايبوكسي وعينات متراكبات الايبوكسي النانوية وعينات متراكبات الايبوكسي المايكروية تضمنت مراحل الخلط الميكانيكي ومجانس خلط الامواج فوق الصوتية واستخدام منظومة التفريغ. تم استخدام فحص الانحناء ذي النقاط الثلاث وفحص وقوة الصدمة وفحص الصلادة وفحص السعة الكهربائية العزلية وفحص الماسح التفاضلي السعوي الحراري وفحص مجهر المسح الالكتروني وفحص التوصيل الحراري لفحص عينات الايبوكسي ومتراكباتة النانوية والمايكروية وقد اظهرت النتائج التي تم الحصول عليها من فحص متانة الانحناء ذي النقاط الثلاث زيادة تدعيم الخصائص الميكانيكية لمتراكبات الايبوكسي الزركونيا النانوية ,ان نسبة 2% من الخلط تؤدي الى اعلى نسبة تدعيم لا متانة الانحناء بلغت 52% اما معامل الانحناء فتضاعف مرتين عند هذه النسبة وايضزاادة متانة الكسر لتصل الى 86% مقارنة مع نتائج عينة الايبوكسي واما قوة الصدمة فقد بلغت 51% وارتفعت صلادة المادة 5% نسبة التدعيم 2% . وقد ظهر الكسر اللدن بشكل واضح في بعض منحنيات الاجهاد - الانفعال في متراكبات الايبوكسي زركونيا.كما اظهرت الخصائص الميكانيكية لمتراكبات الايبوكسي مغنيسيا النانوية زيادة تدعيمها بزيادة نسب الخلط الحجمية لجسيمات المغنيسيا النانوي في التراكيز القليلة (< 5%) حيث اظهرت النسبة 4% من MgO اانانوية اعلى قيمة لقوة الانحناء حيث ازدادة بنسبة 47% مقارنة EP) ) في حين معامل الانحناء ارتفع بنسبة 74% مقارنة EP) ) في حين متانة الكسر لمتراكبات الايبوكسي مغنيسيا النانوية فتضاعفت بحدود اربع مرات عن الايبوكسي وقد بلغت قوة الصدمة 65% عند نسبة التدعيم وارتفعت صلادة المادة 3% مقارنة EP) ) لوحده. وقد ظهر الكسر اللدن بشكل واضح في منحنيات الاجهاد - الانفعال في متراكبات الايبوكسي مغنيسيا..الخصائص الميكانيكية لمتراكبات الايبوكسي زركونيا المايكروية ومتراكبات الايبوكسي مغنيسيا المايكروية اظهر انخفاض في خصائصها الميكانيكية بارتفاع نسب الخلط الحجمي للجسيمات المايكروية للزركونيا وللمغنيسيا ما عدا معامل الثني فقد زاد بارتفاع نسب الخلط الحجمي لجسيمات الزركونيا والمغنيسيا المايكروي.وهذا يظهر تفوق الجسيمات النانوية عن الاخرى المايكروية حيث اضافتها بنسب ضئيلة تؤدي الى تحسين ملحوظ في الصفات الميكانكية والتي يتم تفسيرها عن طريق الصور الماخوذة عن مجهر الماسح الالكتروني والتي اظهرت البنية التركيبة لسطح الكسر لمتراكبات الايبوكسي زركونيا النانوية ولمتراكبات الايبوكسي مغنيسيا النانوية بوجود شقوق نانوية عند نسب خلط حجمية معينة ,وقد بينت صور الكسر انتهاء اغلب الشقوق من التركيب بسب وجود الاضافات لجسيمات الزركونيا والمغنيسيا النانوية فكانت اقل ما يمكن في نسب2 % من نسب الخلط الحجمي لجسيمات الزركونيا النانوي وعند 4% من نسب خلط حجمي لجسيمات المغنيسيا النانوي. وهذا معزز من النتائج العملية التي حصلنا عليها عند هذه النسب الضئيلة الاضافة واثرها في تحسين الصفات الميكانيكية للايبوكسي.ان الخصائص الكهربائية العزلية لمتراكبات الايبوكسي زركونيا النانوية ولمتراكبات الايبوكسي مغنيسيا النانوية اظهرت زيادة تدعيم ثابت العزل الكهربائي عند نسب الخلط الحجمية الواطئة لجسيمات الزركونيا والمغنيسيا النانوية في حين في نسب الخلط العالية (> 10%) بداء ثابت العزل الكهربائي لمتراكب الايبوكسي مغنيسيا الناوني بالارتفاع عن اعلى نسبة تحسن في حين ثابت العزل الكهربائي لمتراكب الايبوكسي زركونيا بالانخفاض. في حين ان زاوية ظل الفقد لمتراكب الايبوكسي زركونيا النانوي تزداد زيادة طفيفة بزيادة نسب الخلط الحجمي لجسيمات الزركونيا النانوي في حين زاوية ظل الفقد لمتراكب الايبوكسي مغنيسيا النانوي تقل بنسب قليلة بزيادة نسب الخلط الحجمي لجسيمات المغنيسيا النانوي.التوصيل الحراري لمتراكبات الايبوكسي زركونيا النانوية ولمتراكبات الايبوكسي مغنيسيا النانوية لها نفس السلوك نسب خلط حجمية مختلفة (1, 2, 3, 4, 5, 7, 10, 15 و20%) ان التوصيل الحراري لكلا المتراكبتين (لمتراكب الايبوكسي زركونيا النانوي ولمتراكب الايبوكسي مغنيسيا النانوي) يزداد بزيادة نسب الخلط الحجمية لجسيمات زركونيا ومغنيسيا النانوية. تمتلك المتراكبات النانوية توصيل حراري اقل من المتراكبات المايكروية. اما المتراكبات النانوية فقد امتلك متركبت الزركونيا قيما اعلى للتوصيل الحراري مقارنة بمتراكبة المغنيسيا. | Epoxy with various mix ratio of concentration 1, 2, 3, 4, 5, 7, 10, 15 and 20% of ZrO2, MgO nanoparticles and ZrO2, MgO microparticles were used to prepare epoxy microcomposites and epoxy nanocomposites in order to study the several mechanical properties (flexural strength, flexural modulus , fracture toughness, impact strength and hardness) and electrical properties (dielectrical constant , dissipation factor and thermal conductivity) and thermal properties (thermal conductivity and Tg).The molding process was used to prepare epoxy and their nanocomposite and microcomposite samples using, ultrasonic homogenizer and shearing mixer. Three point bending examine, impact strength examine, hardness shore D examine, The LCR meter examine, Scanning Electron Microscope (SEM) examine and Differential Scanning Calorimeter (DSC) were used also.The results where obtained to form 3 - point bending examine illustrated that the mechanical properties of EP/ ZrO2 nanocomposites were increased with increasing concentration of ZrO2 nanoparticles. The ratio of about 2% vol. fraction lead to Maximum improvement in flexural strength was 52%. flexural modulus improvement was doubled at this ratio of vol. fraction, fracture toughness is improved about 86% at 2% vol. fraction, impact strength is improved about 51% at 2% vol. fraction , while hardness is improved about 5% at 2% vol. fraction comparing with results of epoxy sample. Ductile behavior appears in some stress - strain curves of obtained for EP/ ZrO2 nanocomposites. The mechanical properties of EP/ MgO nanocomposites were increased with increasing concentration of MgO nanoparticles at low volume fractions (˂ 5%) of MgO nanoparticles. Flexural strength improved 47% at 4% vol. fraction. Flexural modulus is improvement about 74% at 4% vol. fraction, fracture toughness is rise about four times at 4% vol. fraction. impact strength is improved about 65% at 4% vol. fraction, while hardness is improved about 3% at 4% vol. fraction . Ductile behavior almost appears in stress - strain curves of EP/ MgO nanocomposites. The mechanical properties for epoxy ZrO2/ MgO microcomposites reduce with increasing concentration of ZrO2/ MgO microparticles. this show nanoparticles overcome for others microparticles; thus addition quit small amounts .lead to particularly improvement in mechanical properties ,which can be explain through the pictures . Scanning Electron Microscope (SEM) pictures show the topography of fractured structure of EP/ ZrO2 nanocomposites and EP/ MgO nanocomposites with nanocracks of the epoxy structure at some of volume fractions of ZrO2/ MgO nanoparticles, while the topography of fractured structure show the nanocracks almost vanish from the structure because of adding ZrO2/ MgO nanoparticles was at minimum value at 2% vol. fraction of ZrO2 nanoparticles and 4% vol. fraction of MgO nanoparticles . this enhance by experimental results which we got it in the small raito addition .their influence to improve mechanical properties of epoxy. Dielectrical properties of EP/ ZrO2 nanocomposites and EP/ MgO nanocomposites show; Dielectric constant improved at low volume fraction of ZrO2/ MgO nanoparticles, while at higher concentration (> 10%) Dielectric constant of EP/ MgO nanocomposites stile increased and Dielectric constant begin to reduce in EP/ ZrO2 nanocomposites. Tan delta of EP/ ZrO2 nanocomposites little increase with increasing volume fraction ZrO2 nanoparticles, while Tan delta of EP/ MgO nanocomposites begin to reduce with increasing volume fraction of MgO nanoparticles.Thermal conductivity for EP/ ZrO2 nanocomposites and EP/ MgO nanocomposites have the same behavior with 1, 2, 3, 4, 5, 7, 10, and 15% vol. fraction. thermal conductivity of both EP/ ZrO2 nanocomposites and EP/ MgO nanocomposites increase with increasing the volume fraction. EP/ MgO nanocomposites and EP/ MgO nanocomposites have thermal conductivity lower than from EP/ MgO microcomposites and EP/ MgO microcomposites

تحضير ودراسة مفرق هجين من مادة (CuInTe2) == Preparation and Study Heterojunction From CuInTe2 Material

Author name: شيماء قاسم عبد الحسن
Supervisor name: بشرى كاظم حسون الميالي | فلاح ابراهيم مصطفى العطار
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: Arabic
University location: Baghdad
First pages:
Abstract: حضرت سبيكة CuInTe2(CIT) بطريقة التبخير الحراري في الفراغ بعد ها تم تحضير اغشية هذه المادة على قواعد من الزجاج بدرجات حرارة تلدين K((673,473 وسمك nm(900,600,300).تم فحص تركيب كل من سبيكة واغشية CIT المحضرة بظروف مختلفة بواسطة تقانة حيود الاشعة السينية .XRD وقد اظهرت نتائج حيود الاشعة السينية ان السبيكة وجميع الاغشية الملدنة عند درجة حرارة تلدين K(673 and 473) كانت تمتلك تركيبا متعدد التبلور من النظام الرباعي (Tetragonal) بالاتجاه البلوري السائد (112)، في حين كانت الاغشية المحضرة في درجة حرارة الغرفة (300)K ذات تركيب عشوائي. اما دراسة خصائص سطح اغشية CIT بواسطة مجهر القوة الذرية AFM فقد بينت زيادة الحجم الحبيبي مع زيادة كل من درجة حرارة التلدين والسمك.واظهرت القياسات البصرية لاغشية CIT انها تمتلك فجوة طاقة مباشرة، اذ تزداد فجوة الطاقة بزيادة درجة حرارة التلدين لجميع الاغشية المحضرة، وكذلك تم حساب النفاذية والثوابت البصرية مثل معامل الانكسار ومعامل الخمود وثابت العزل بجزئيه حقيقي والخيالي ضمن مدى الاطوال الموجيةnm (600 - 2700) .واظهرت نتائج الخصائص الكهربائية للاغشية المحضرة على قواعد الزجاج ان التوصيلية الكهربائية المستمرة D.C كانت تمتلك حاملات شحنة من النوع الموجب، وانها تزداد مع زيادة درجة حرارة التلدين لجميع الاغشية المحضرة في حين كانت تقل مع زيادة السمك .وان لهذه الاغشية طاقتي تنشيط، اي انها تملك اليتين للانتقال الالكتروني.كما بينت ايضا نتائج تاثير هول ان الاغشية كانت تمتلك حاملات شحنة من النوع (p - type).في هذا البحث ايضا تم تصنيع خلايا شمسية من ترسيب اغشية CITعلى قواعد سليكونية مكونة من المفارق الهجينةSi/CIT) ) الملدنة بدرجات حرارة وسمـــك مختلفة، واخرى على قواعد مكونة من زجاجFTO , ITO للمفارق الهجينة ITO/ CdS/ CIT)) و(FTO/CdS/CIT)، وكذلك ITO/ZnO/CdS/CIT)) و(FTO/ ZnO/CdS/CIT) المرسبة بطريقة التبخير الحراري . تم قياس سعة الانحياز العكسي كدالة لفولتية الانحياز عند التردد الافضل 10)KHz) وبينت هذه النتائج ان المفارق من النوع الحاد، كما قلت السعة بزيادة جهد الانحياز العكسي وهبوط جهد البناء الداخلي بزيادة درجة حرارة التلدين .واظهرت دراسة خواص (تيار - جهد) في حالة الاضاءة للمفارق الهجينة المحضرة بان افضل مفرق لتصنيع خلية شمسية على القواعد السليكونية كان للمفرق المحضر بسمك 600)nm (بدرجة حرارة تلدين (673)K. اذ بلغت الكفاءة التحويلية (%1.8) وعند طلاء هذه الخلية بطبقة مضادة للانعكاس من مادة TiO2 بسمك 600)nm) ازدادت الكفاءة لتصل الى (2.4%). | CuInTe2 (CIT) alloy prepared by thermal evaporation technique then prepared thin film from this alloy on glass substrate of different thickness (300,600 and 900 ±20)nm and at different annealing temperature (473 and 673)K.The structure of the alloy and CIT films which prepared at different deposition condition are examined using x - ray diffraction (XRD) technique.XRD analysis show that the alloy and the films prepared at (473 and 673)K have polycrystalline structure of tetragonal type with preferred orientation[112],while films prepared at R.T(300)K show amorphous structure. CIT films morphology were studied using AFM techniques, the results show that increase in grain size with increase thickness and annealing temperature .The optical measurement show that CIT films have a direct energy gap and it increase the increasing annealing temperature ,the transmittance and optical constant such as refractive index ,extinction coefficient and the dielectric constant with both part real and imaginary within the wavelengths in the range (600 - 2700)nm were calculated too.Electrical properties results for films prepared on glass substrate as a function of thickness and annealing temperature show that the electrical conductivity D.C were p - type and it with increasing annealing temperature while it decrease with increasing thickness, all films have two activation energies with two mechanisms of transport of free carriers .Hall effect results show that all films were p - type.In this research, fabrication solar cells from deposition CIT films with different thickness and different annealing temperature on silicon substrate (Si/CIT) heterojunction and another deposition on FTO,ITO substrate to fabricated solar cell from (ITO/CdS/CIT) ,) FTO/CdS/CIT) heterojunction and (ITO/ZnO/CdS/CIT) , (FTO/ZnO/CdS/CIT) heterojunction by using thermal evaporation technique.The C - V measurements as a function of reverse bias voltage at frequency (10KHz) show that the heterojunctions are abrupt type, the capacitance decrease as reverse bias voltage increase and the value of built - in potential decrease with increasing annealing temperature. The current - voltage characterization study for heterojunction prepared under illumination shows that the solar cell which have optimum condition deposition on silicon substrate with the thickness 600nm at annealing temperature 673K, have best efficiency (1.8%) among other cells, and after coating this cell by antireflection coating (TiO2) with thickness (600)nm, the value of efficiency increase to(2.4%)

خصائص التفريغ الكهربائي لمنظومة بلازما المايكنترون (PM) للتيارات المستمرة ذات الاقطاب المستوية == Electrical discharge characterizations of dc - planar magnetron (PM) Plasma device

Author name: شيماء حسين عبد مسلم
Supervisor name: ابراهيم رمضان عاكول | محمد خماس خلف
General topic: Physics
Specific topic: Plasma Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: في هذا العمل, تم تصميم وتصنيع الماكنترون ذو الاقطاب المستوية لمنظومة الترذيذ بالبلارما وقد تم توليد المجال المغناطيسي للماكنترون بطريقتين , الاولى باستخدام ملف كهرومغناطيسي.والطريقة الثانية لتوليد المجال المغناطيسي هي باستخدام زوج من المغانط الدائمة .درست مميزات التيار - الفولتية لمسافات مختلفة بين الاقطاب ,ضغط الغاز, وتغير نسب خلط غاز الاركون الى غاز الاوكسجين وشدة مجال مغناطيسي مختلف .وقد بينت النتائج ان التفريغ ضمن منطقة التفريغ التوهجي غير الطبيعي. وان افضل مسافة بين الاقطاب هي 4.5 cm.وقد وجد ان تيار التفريغ يقل بزيادة نسبة غز الاوكسجين ويزداد بزيادة شدة المجال المغناطيسي.وقد تم الحصول على منحني باشن لمسافات بين الاقطاب مختلفة,ونسب خلط لغازي الاركون - الاوكسجين مختلفة , وشدة مجال مغناطيسي ومادة قطب مختلفة .كما تم دراسة تاثير المجال المغناطيسي على كفاءة التاين.تمت دراسة تاثير المجال المغناطيسي على معلمات البلازما باستخدام مجس لانكماير المفرد. وقد وجد ان درجة حرارة الالكترون(Te) تقل بزيادة ضغط الغاز والمجال المغناطيسي, كما لوحظ وجود درجتي حرارة للالكترون عند تسليط مجال مغناطيسي تبعا لمنشاها. بينما وجد ان كثافة الالكترونات تزداد بزيادة كلا من ضغط الغاز والمجال المغناطيسي.حضرت اكاسيد النحاس والالمنيوم والنيكل باستخدام منظومة ترذيذ البلازما بالماكنترون ذو الاقطاب المستوية للتيارات المستمرة على قواعد زجاجية بنفس الظروف (الفولتية المسلطة 1200 فولت,المسافة 4.5 cm , الضغوط تغيرت ما بين mbar (0.05 - 0.14) نسبة(9/1)Ar/O2 وB = 200Gauss).من القياسات البصرية وجدت ان اغشية CuO اظهرت النفاذية في نطاق 78 - 86٪ في حين انها كانت بين 82 - 91٪ و86 - 90٪ لل Al2O3 وNiO على التوالي. فجوة الطاقة البصرية انخفضت بشكل طفيف مع زيادة ضغط العمل، فاغشية CuO لديها فجوات الطاقة المباشرة (Eg) (تقل 2.35 - 1.95eV) انخفضت فجوة الطاقة Al2O3 من 4.2 eV الى 3.8 ، والفجوة NiO 4.1 - 3.9 eV)) عند زيادة الضغط mbar (0.05 - 0.14).اظهرت نتائج تحليل حيود الاشعة السينية ان بنية الاغشية CuO هو متعددة البلورات ذات تركيب احادي الميل الاتجاه المفضل في (110) و(111). بينما يظهر Al2O3 طبيعة عشوائية. وحددت الاغشية NiO ان تكون الطابع متعدد التبلور مع بنية مكعب على طول (111) و(101) التوجه. وعلاوة على ذلك، تم العثور على Ni2O3 بواسطة حيود الاشعة السينية.وقد تم دراسة مورفولوجية سطح اغشيه CuO، Al2O3، وNiO باستخدام مجهر القوة الذرية (AFM)، ومجهر الماسح الالكتروني (SEM) واظهرت النتيجة ان كل الاغشية لها حجم نانوي ، ويزداد الحجم الحبيبي مع زيادة ضغط العمل .وقد تم قياس حساسية الافلام CuO، Al2O3، وNiO لغاز NO2 في الهواء المحيط في نظام الاستشعار الغاز. تم اختبار جميع العينات بنسبة 3٪ NO2 والجهد التحيز (6 فولت).اقصى حساسية لCuO هي (43%)مع وقت استجابة سريع (11.7s) ووقت الاسترداد (17.1s) ووجد ان افضل درجة حرارة عمل للمتحسس 170oC. وحساسية NiO في الضغط الامثل ( mbar0.08) 11.86% مع زمن الاستجابة (47.7s) ووقت الاسترداد (35.1s) في افضل درجة حرارة عمل للمتحسس 180 درجة مئوية. بينما لا استجابة Al2O3لغازNO2 .تم داسة خصائص اغشية اوكسيد النيكل الالكتروماتيكية ,حيث وجد من القياسات البصرية باستخدام اللوكس ميتر ,ان ضغط العمل الامثل كان 0.08 ملي بار حيث تمتلك الاغشية المحضرة نفاذية اعلى في حالة التبيض، ومعامل امتصاص اكبر عند عكس القطبية المسلطة ، مقارنة مع ضغوط العمل اخرى. | In this work, a DC planar magnetron of plasma sputtering device has been designed and constructed. The magnetic field of magnetron generated by using two ways, firstly, electromagnetic coil. Secondly the magnetic field generated by pair of permanent magnets. The current - voltage characteristics have been studied at different inter - electrodes spacing, gas pressure, argon - oxygen mixture, and magnetic field strength. The result shown that the discharge is operating in the abnormal glow region. The optimum inter - electrode spacing was 4.5cm, and the discharge current decreased by increasing O2 percentage and increased by increasing magnetic field strength. Paschen curves have been obtained at different inter - electrodes spacing, argon - oxygen mixture, magnetic field strength and cathode materials. Also the effect of magnetic field on the ionization efficiency has been studied. The effect of magnetic field on plasma parameters are investigated by using a single Langmuir probe. It is found that the electron temperature decreases with increased working pressure and magnetic field, also when the magnetic field applied the probe measured two electron temperatures (Te) according to their origin. While electron density increased with both increasing working gas pressure and magnetic field strength Copper oxide, aluminum oxide, and nickel oxide thin films are prepared using dc - planar magnetron plasma sputtering system on the glass substrate at the same conditions( applied voltage (1200 volt) distance 4.5 cm working pressure varied between (0.05 - 0.14)mbar (9/1) Ar/O2 ratio and B=200 Gauss. From optical measurements have found that, the CuO thin films have showed transmittance in 78 - 86% range whereas it was in between 82 - 91% and 86 - 90% for the Al2O3 and NiO thin films respectively. The optical energy gap decreased slightly with increase working pressure, since CuO films have the direct energy gaps (Eg) (2. 35eV decreases to 1.95eV), Al2O3 band gap decreased from 4.2 eV to 3.8 eV , and band gap of NiO (4.1 to 3.9 eV) at pressure increased from 0.05 to 0.14 mbar. X - Ray diffraction analysis have showed that the structure of CuO films is polycrystalline with monoclinic structure and preferential orientation in the (110), and(111) directions. While Al2O3 shows amorphous nature. The NiO films are identified to be polycrystalline nature with cubic structure along (111) and (101)orientation. Furthermore, Ni2O3 is found by XRD. The surface morphology of CuO, Al2O3, and NiO thin films have been studied by using Atomic Force Microscope (AFM) and Scanning Electron Microscope (SEM). The result is showed that all film had nano size structure, and the grain size increased with increased working pressure.The sensitivity of CuO, Al2O3, and NiO films to NO2 gas in air ambient has been measured in gas sensing system. All samples are tested at 3% NO2 and bias voltage (6 volt). The maximum sensitivity of CuO is (43%) with the fast response time (11.7s) and recovery time of (17.1s) at optimal operating temperature 443.15 kelvin. And the sensitivity of NiO at the optimum pressure (0.08 mbar) is found 11.86% with the response time (47.7s) and recovery time of (35.1s) at optimum operating temperature 180 oC, While Al2O3 not response towards NO2gas. Electrochromic (EC) properties of nickel oxide films have been studied, They were characterized by optical measurements by using lux meter ,the optimizing working pressure was 0.08 mbar, since the prepared films have a higher transmittance in the bleached state, and larger absorptance when the opposite polarity was applied, compared to another working pressures.

التركيب المورفولوجي والخواص البصرية لاغشية In2O3 الرقيقة == Morphology Structural and Optical Properties of In2O3 Thin Films

Author name: شيماء احمد كاظم
Supervisor name: علية عبد المحسن شهاب
General topic: Physics
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: يتناول هذا البحث دراسة تاثير تغير زمن الاكسدة ودرجة حرارة التلدين على الخصائص التركيبية والبصرية لاغشية اوكسيد الانديوم الثلاثي (In2O3) الرقيقة التي تم تحضيرها بتقنية التبخير الحراري في الفراغ ، حيث تم ترسيب معدن الانديوم (In) على قواعد من الزجاج واخرى من السليكون بدرجة حرارة الغرفة (300 K) وبسمك (400 ± 10 nm) وبمعدل ترسيب 5.47 ± 0.5 nm/sec)) ، ومن ثم اكسدة اغشية (In) المحضرة حراريا بدرجة حرارة (673 K) وبوجود الهواء وبزمن مختلف (ساعة ، ساعة ونصف ، ساعتان) ، بعد ذلك تم اجراء التلدين بدرجات حرارة مختلفة K (323 , 373 , 423) على اغشية (In2O3) المؤكسدة بزمن ساعة واحدة باعتبار ان هذا الزمن هو افضل زمن اكسدة من ناحية قيم فجوة الطاقة البصرية والحجم الحبيبي والخشونة ومعدل الخشونة . درست الخصائص التركيبية للاغشية المحضرة (قبل التلدين وبعده) عن طريق تقنية حيود الاشعة السينية (XRD) التي اظهرت ان هذه الاغشية ذات تركيب بلوري متعدد ومن نوع مكعب ، وكذلك تم استخدام مجهر القوة الذرية (AFM) والمجهر الالكتروني الماسح (SEM) لدراسة طوبوغرافية السطح من ناحية التجانس والخشونة ومعدل الخشونة . درست الخصائص البصرية للاغشية المحضرة (قبل التلدين وبعده) باستخدام المطياف البصري (Optical Spectrometer) ، حيث تم حساب فجوة الطاقة البصرية والتي كانت ذات قيمة اقل عند زمن اكسدة ساعة وعند درجة تلدين (323 K) ، بالاضافة الى دراسة طيف كل من الامتصاصية والنفاذية والانعكاسية ، وايضا تم حساب الثوابت البصرية وهي : معامل الامتصاص ، معامل الانكسار ، معامل الخمود ، ثابت العزل بجزئيه الحقيقي والخيالي كدالة لطاقة الفوتون ، وقد بينت النتائج ان زيادة قيم هذه الثوابت متعلقة بزيادة زمن الاكسدة ودرجة حرارة التلدين. | This research examines the effect of changing time of oxidation and the degree of annealing temperature on the structural and optical properties of membranes dioxide triple indium (In2O3 thin) that was prepared technology thermal evaporation in a vacuum, where the deposition of metal indium (In) on the glass and silicon substrate at room temperature (300 K) and thickness (400 ± 10 nm) and the rate of deposition of (5.47 ± 0.5 nm / sec) , and then oxidation films (In) prepared thermally and the presence of air at a different (hour, hour and a half, two hours) , then annealing was performed at different temperatures (323, 373, 423) K films (In2O3) oxidizing a time of one hour, considering that this time is the best time of antioxidants in terms of optical energy gap and grain size and roughness values and the rate of roughness . Structural properties of prepared films have been studied (before and after annealing) by X - ray diffraction technique (XRD) which showed that these films with the structure of crystalline multi it cubic type, as well as the use of an atomic force microscope (AFM) and electron microscopy scanner (SEM) to study the topography of the surface in terms of homogeneity and roughness and the rate of roughness . Optical properties of prepared films have been studied (before and after annealing) using the optical spectrometer, where the optical energy gap , and which were less valuable when oxidation hour time account and at a temperature annealing (323 K) , in addition to the study of spectrum both absorbance and transmittance and reflectivity , and was also the optical constants account : the absorption coefficient, refractive index, extinction coefficient, dielectric constant real and imaginary as a function of photon energy, the results have been shown to increase the values of these constants related to increased oxidation time and the annealing temperature.

تحديد مديات الاجسام وابعادها الغاطسة في الماء باستخدام تقنيات معالجة الصورة الرقمية وتحديد موديل رياضي لمعامل انكسار السوائل الشفافة == Under water objects range and dimensions using digital image processing technique and determine the depths as a function of camera viewing angle

Author name: سماهر وحيد هاشم
Supervisor name: علي عبد داود الزكي
General topic: Physics
Specific topic: Image Processing
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: انتشرت انظمة قياس ابعاد الاجسام الغاطسة في الماء التي تعتمد على استخدام الكاميرا الرقمية على نحو واسع في الاونة الاخيرة , وعلى وجه الخصوص في الانظمة الروبوتية , لقلة تكلفتها ,وسهولة تركيبها , وسرعتها , وكونها امنة ودقيقة بما يكفي مقارنة بانظمة القياس المعقدة الاخرى ، التي تستخدم الليزر او المتحسسات الكهرومغناطيسية . لذلك توجهنا في دراستنا الحالية الى استعمال كاميرراقمية في تحديد طول الجسم بالبكسل Lp وايجاد موديل رياضي لطول الجسم بالبكسل Lp كدالة لعمق الجسم الغاطس في الماء h . وبعد حساب معامل التكبير m للاجسام الغاطسة في الماء ، تم الحصول في هذه الدراسة على موديل رياضي يربط بين معامل التكبير m وعمق الاجسام الغاطسة في الماء h وزاوية التصوير في الكاميرا θ , ومن خلاله تم حساب عمق الجسم , واظهرت النتائج تطابقا عاليا بين القيم الفعلية والقيم المستنتجة من الموديل الرياضي . اما في الحالة الثانية فقد تم ايجاد ابعاد الاجسام الغاطسة في الماء , حيث تم استحداث موديل رياضي يربط بين عامل التدرج Scf وعمق الجسم الغاطس في الماء h وزاوية التصوير للكاميرا θ ومن هذا الموديل الرياضي يمكن ايجاد اي واحد من المعاملات الثلاثة في حال كون اثنين منها معلومة , وقد تم اختبار الموديل لايجاد عمق الجسم الغاطس في الماء وكذلك ايجاد ابعاد الاجسام المجهولة الغاطسة في الماء والنتائج التي تم الحصول عليها كانت قريبة جدا من القيم الحقيقية. كما تم حساب معامل التكبير m وعامل التدرج Scf لايجاد علاقة رياضية تربط بين معامل التكبير وعامل التدرج وزاوية التصوير في الكاميرا لحساب معامل التكبير. وقد عني الجزء الاخير من هذه الدراسة بحساب معامل الانكسار البصري اذ تم اقتراح طريقة جديدة وسريعة وفعالة في تحديد معامل انكسار السوائل ضمن مدى الاطوال الموجية المرئية , اذ حددت العلاقة بين طول الجسم بالبكسل Lp مع العمق الظاهري للجسم الغاطس في السائل hi في حال معرفة معامل انكسار السائل (الماء) , ثم ايجاد علاقة رياضية يمكن اعتمادها كموديل رياضيا فعالا في تحديد معامل انكسار اي سائل شفاف اخر ، حيث تم تطبيق هذا الموديل لحساب معامل انكسار سائل اخر (البنزين) باعتماد المعادلة نفسها في حالة غمر الجسم نفسه فيه . وقد اظهرت النتائج دقه عالية في عملية حساب معامل الانكسار , واظهرت تطابقا بين القيمة الفعلية والقيمة التي تم حسابها في التقنية المقترحة وبنسب خطا ضئيلة جدا. | The measuring systems of dimensions of the immersed objects in water that base on the using of the digital camera are widely spread nowadays, especially in the robotic systems, because they are easy to install, fast, safe, inexpensive, and sufficiently accurate as compared with other complicated measuring systems that using the laser or electromagnetic sensors. Therefore, in the current study we intended to use a digital camera to determine the length of object in Pixels (Lp) and to find mathematical model of the length of the object in Pixels as a function to depth (h) of the immersed object in water. In this study, after calculating the magnification factor (m) of the immersed object in water, we have obtained a mathematical model relates the magnification factor (m) with the depth of the immersed object in water (h) and the angle of the taking picture (θ), then we have calculated the depth of the immersed object, the results showed a high matching between the actual values and the calculated values from this mathematical model. In the second phase of the study we have found the dimensions of the immersed objects in water by developing a mathematical model relates the scale factor (Scf) with the depth of the immersed object in water (h) and the angle of the taking picture (θ), from this mathematical model we can find any one of these parameters in case two of them are known. We have tested this mathematical model to find the depth of immersed object in water and to determine the dimensions of the unknown immersed objects in water. The results were very close to the actual values. Then we have calculated the magnification factor (m) and the scale factor (Scf) to find a mathematical relationship that relates the magnification factor with the scale factor and the angle of the taking picture to calculate the magnification factor. The last part of this study focuses on the calculation of the optical refractive index, where we have proposed a new, fast, and effective method to determine the refractive index of the liquids within the range of the visible wavelengths. We identified a relationship between the length of object in Pixels (Lp) and the apparent depth of the immersed objects in the liquid such as (water) (hi) in case of value of refractive index was known. Then finding mathematical relationship can be adopted as an effective mathematical model to determine the refractive index of another transparent liquid. According to this equation, we have calculated the refractive index of benzene in case we have immersed the same object in it. The results showed high accuracy in the calculating the refractive index, and also showed a symmetry between the actual value and the calculated ones with a very low error rate in the proposed technique.

تصميم وتقييم طلاء المضاد للانعكاس غـير المسـتقطـب == Design and Evaluation of Non - Polarizing Antireflection Coating

Author name: سارة عامـر ســــلمان
Supervisor name: الاء نزار عبد الغفار
General topic: Physics
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: لقد تم اجراء دراسة نظرية ووضع نموذج رياضي يعتمد في بناءه على المصفوفة المميزة المعدلة لتصميم طلاء مضاد للانعكاس لايتاثر بالاستقطاب ودراسة تاثير زوايا السقوط المائل . حيث توصلنا الى بنى تصاميم مثلى لطلاءات مضادة للانعكاس غير مستقطبة ولزوايا سقوط مختلفة للطيف الكهرومغناطيسي باستخدام مواد متجانسة موحدة الخواص مهملة الامتصاص ضمن منطقتي الضوء المرئي (300 - 800)nm وتحت الحمراء المتوسطة (3000 - 5000)nm وباستخدام الزجاج والسليكون كمواد اساس على التوالي.وفقا لاجراءات تحقق الامثلية فان النتائج اشارت الى امكانية التغلب على الصعوبات التي تظهر نتيجة السقوط المائل للطيف والتي من ابرزها ظاهرة الفصل (Splitting) لموجة الضوء المنعكسة الى مستويين P, S (نتيجة لظاهرة الاستقطاب) وايضا الازاحة الجانبية لمنحنيي الانعكاسية RS,RP باتجاه الاطوال الموجية القصيرة واللاتناظر بين المنحـنيين .وقد اظهرت التصاميم مقدرة عالية في تقليل انعكاسية الزجاج (ضمن منطقة الطيف المرئي) والسليكون (ضمن منطقة تحت الحمراء المتوسطة ) وتحقيق ادنى انعكاسية عند طول موجة التصميم المقترحة ولمدى واسع من زوايا السقوط. كما اوضحت النتائج امكانية التوصل الى تصميم طلاء مضاد للانعكاس غير مستقطب واسع الحزمة عند زوايا سقوط عالية تصل الى 60o وبعدد طبقات قليلة في المنطقة المرئية, فضلا عن التوصل الى تصميم طلاء مضاد للانعكاسية غير مستقطب عند اطوال موجية مختلفة عند 80o في المنطقة الحمراء | In this current study a mathematical model was put on to design anti - reflection coatings at oblique incidence of light for visible region (300 - 800 )nm and mid infrared region (MWIR) (3000 - 5000)nm .successfully we achieved designs with optimal performance at high angles of incidence where the results refer to overcome significant problems of design at oblique incidence .the main problem that we were able to overcome, is the splitting of the incident light into two modes of wave S and P - polarization where the separation of reflection performance for both S - and P - polarized wave expands when incidence angle increases. We managed to obtain designs of non - polarized antireflection coatings those that have the same reflection for both S - and P - polarizations at specified angles. results refer to designs of non - polarized antireflection coatings without splitting at high incidence angles. We accomplished designs of non - polarized antireflection coatings that provide low reflection within the Intended range of wavelengths where we could to limit the effect of the high incidence angles that increase the reflectance of the chosen substrates.Also the problem of shifting of reflection performance toward shorter wavelengths due to the oblique incidence of light was resolved and designs of optimal performance of non - polarized antireflection coatings with low reflection at high incidence angles was achieved.It has been provided a promising coating materials system for use in design of non - polarizing antireflection coatings at different incidence angles for the concerned wavelengths regions

دراسة تحليلية للحام بالليزر على الخواص الحرارية - الميكانيكية للبوليمرات باستخدام برنامج ANSYS == Analysis Study of Laser Welding on Thermal - Mechanical Properties of Polymers Using ANSYS Program

Author name: زينه يونس علي
Supervisor name: خالد هادي مهدي العبيدي | ندى فاضل توفيق
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: الخلاصةان الهدف من هذه الدراسة, هو التنبؤ بسلوك المواد من حيث الخصائص التركيبية ,الحرارية والميكانيكية اثناء عملية اللحام في 3 - D. ان دراسة الخصائص التركيبية للمادة قد تم باعتبارها دالة لدرجة حرارة الانتقال الزجاجي T_g, ودرجة حرارة الانصهار T_m, وتغير الطور بينما يتم دراسة الخصائص الحرارية وفقا لتوزيع درجات الحرارة, والتدرج الحراري, والفيض الحراري, واخيرا يتم دراسة الخواص الميكانيكية بواسطة الاجهاد والمطاوعة.لقد تم تبني طريقة FEM لمحاكاة عملية اللحام لقطعتين متشابهتين ومختلفتين من مادة البولي بروبلين والبولي ستيرين في ثلاثة ابعاد. ان تحليل الخصائص الحرارية والميكانيكية لبوليمر البولي بروبلين والبولي ستيرين قد تم بدلالة كل من نموذج الحالة المستقرة والنموذج المتنقل باستخدام برنامج ((ANSYS 11. حيث ربط نموذج الحالة المستقرة (اعتبرت انها الحمل الابتدائي) مع نموذج الحالة المتنقلة بافتراض وجود الحمل الحراري والميكانيكي سوية بنفس الوقت على اعتبار ثبوت سرعة اللحام عند20ملي/ثانية ودرجة الحرارة عند 298م, وكذلك تم اختبار تاثير قدرة الليزر باستخدام ثلاثة قيم 50) (150,100 واط, كذلك درست تاثير نصف قطر بقعة الليزر على خصائص البوليمرات المستخدمة.بينت النتائج العددية قابلية لحام كل من المادتين البولي بروبلين والبولي ستيرين بهذه الطريقة, حيث لوحظ تناقص التشوهات الحرارية والميكانيكية الناجمة عن اللحام, كما يشير الشكل الهندسي هذه الاجهادات الى جودة اللحام. وبينت الدراسة ان كل من الفيض الحراري والانحدار الحراري يكون عند اعظم قيمها في اتجاه y - axis وهو اتجاه تسليط الليزر, وكانت درجة الحرارة العظمى في لحام كل من PP - PPو PP - PS هي ((351.4kو (425.9k) على التوالي. اما الاجهادات الميكانيكية فقد كانت واطئة في كل من PP - PPو PP - PS بحدود (0.181*〖10〗^9MPa ) و(0.166*〖10〗^9MPa) والمطاوعة (0.171) و(0.142) لكل من PP - PP وPP - PS على التوالي. واخيرا، لوحظ صغر مساحة المنطقة المتاثرة حراريا اذ كانت بحدود (9.2 〖mm〗^2) بالنسبة ل PP - PP، في حين اظهر عمق الاختراق تحسن مقارنة مع الاساليب المستخدمة، حيث كانت قيمته بحدود (2.5mm), اما في نموذج المتنقل فقد لوحظ تضاعف المساحة المتاثرة وعمق اختراق قريب من نتائج النموذج المستقر. | The aims of this study is to estimate the material behavior properties in terms of its structure, thermal and mechanical properties during welding process in 3 - D. The structure is studied as a function of T_m , T_g and phase change. While the thermal is investigated according to thermal distribution, thermal gradient and thermal flux. Finally the mechanical is examined by stress and strain.Finite element method is adopted to simulate welding process of two similar and dissimilar pieces of polypropylene and polystyrene in 3 - D.The analytical of thermal and mechanical properties is done in terms of steady - state model and transient model using ANSYS 11 program, then coupling the steady - state with transient model by supposed existing thermal and mechanical loads together in same time. Laser power effect on welding is investigated by three powers (50,100,and 150watt) and by laser spot radius (1mm, and 2mm), the welding speed is supposed constant at (20mm/sec).Numerical results show that the ability of this method to joined polymers material PP and PS, where it is noticed that the thermal and mechanical deformations are reduced, also the geometry shape of welding zone is indicated to a good quality of welding.From this study, the thermal gradient and thermal flux are at their maximum values at y - axis, in which the laser direction, and T_max in PP - PP and PP - PS joints are (351.4k) and (425.9k) respectively. Mechanical stresses and strains had low values, about (0.181*〖10〗^9MPa) and (0.166*〖10〗^9 MPa) and strain are about (0.171) and (0.142) for PP - PP and PP - 1PS joint respectively.Finally, it is observed that narrow HAZ area (9.2〖mm〗^2) of PP - PP joint, while penetration depth shows improvement comparing with usual methods, it's value is (2.5mm). In transient model it observes that multiples of HAZ area, and D_p is near its value in steady - state model.

دراسة تاثير خطوط الضغط العالي على تراكيز غاز الرادون في الهواء باستعمال كاشف الاثر النووي CR - 39 == Study of The Effect of High Voltage Power Lines on Radon Concentrations in Air Using Solid State Nuclear Track Detector CR - 39

Author name: زينة جميل رحيم عبد علي
Supervisor name: خالد هادي مهدي العبيدي | ندى فاضل توفيق
General topic: Physics
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: يتضمن الهدف من البحث دراسة تاثير خطوط الضغط العالي 132kV)و400kV ) في مناطق منتخبة من مدينة بغداد على تراكيز الرادون ونواتج انحلاله باستعمال كاشف الاثر النووي CR - 39. تم توزيع عدد من الكواشف بابعاد (2x1cm²) ولمدة شهر كامل داخل وخارج محطتي بوب الشام 400kV والوزيرية 132kV , كذلك في عدد من الدور السكنية القريبة من خطوط الضغط العالي 132kV ومحطة المعري 132kV القريبة من منطقة العدل ببغداد خلال فصل الخريف. تم تحديد تراكيز الرادون خلال المقارنة مع العينات القياسية، ومن خلال النتائج المستحصلة كانت قيمة المعدل الموزون لتراكيز الرادون داخل الابنية تحت تاثير خطوط الضغط العالي 400kVهي 91.77±0.1122Bq/m³)) وفي الخارج كانت مساوية الى (125.73± o.117 Bq/m³) وتحت تاثير خطوط الضغط العالي 132kV في الداخل كانت مساوية الى 60.03± 0.266 Bq/m³)) اما في الابنية البعيدة عن خطوط الضغط العالي فقد كانت مساوية الى Bq/m³) 23.265± 0.77) وفي خارج الابنية 13.63± 0.99 Bq/m³)) يتضح خلال نتائج الدراسة ارتفاع تراكيز غاز الرادون في المناطق القريبة من خطوط الضغط العالي وبشكل ملحوظ مقارنة مع المناطق البعيدة عن الخطوط مما يدل على ان هناك تاثيرا واضحا لخطوط الضغط العالي على تراكيز غاز الرادون ويزداد هذا التاثير بزيادة شدة المجال الكهرومغناطيسي والقرب من هذه الخطوط, كما كان لخطوط 400kV تاثير اقوى من خطوط 132kV على تراكيز الرادون في الهواء, اما تراكيز غاز الرادون داخل الابنية فكانت اعلى من تراكيزه خارج الابنية , وهذه الزيادة في التركيز تعود الى ان جدران الابنية تعد المصدر الرئيس لتوليد الرادون داخل الابنية , حيث تبين ان مواد البناء قد ادت دورا مهما في زيادة تراكيز غاز الرادون داخل الابنية بالاضافة الى عمر الابنية والارتفاع عن مستوى سطح الارض . | The aim of this research the study of the effect of high Voltage power lines (400kVand132kV) upon radon concentration and its decay results by using nuclear track detectors CR - 39 inside Baghdad city. A number of detectors with the dimensions (2x1cm2) was scattered for a whole month indoor and outdoor Bob Al - sham station 400kV and Al - waziriya station 132kV as well as in number of the houses which are very close from the high voltage power lines 132kV and Al - maary 132kV during autumn. The concentrations of radon were determined through the comparison with the standard samples , The results shows that the value of Weighted Average of radon concentration indoor the buildings which are under the effect of high voltage 400kV is (91.77 ± 0.117Bq/m3) and under the effect of high voltage lines 132kV indoor is equal to (60.03±0.266Bq/m3) ,As for the buildings which are far away from the high voltage lines , it was equal to (23.2651± 0.773Bq/m3) and outdoor the buildings (13.63±0.99 Bq/m3) . The results showed that increase of radon concentration in the areas which are close to high voltage power lines compared with areas which are far away from the lines which show that there is a clear effect of high voltage power lines upon the concentration of radon . And this influence increases with increase of the intensity of electromagnetic field as well as the near distance with these lines .For there was a stronger effect of 400kV lines than 132kV lines upon radon concentration in air, Also the concentration of radon gas indoor the building were higher from its concentration outdoor the building . And this increase in concentration is due to the fact that the walls of the buildings are considered to be the main source for generating radon indoor the building as well

الاستقرارية الفيزيائية - الكيميائية للمتراكبات PVA - MnSO4.H2O مع الظروف الجوية == Physico - Chemical Stability of (PVA - MnSO4.H2O) Composites against weather conditions

Author name: زينب كاظم حمزة
Supervisor name: اسرار عبد المنعم سعيد
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: في هذه الدراسه تم تحضير افلام بولي فينيل الكحول وكبريتات المنغنيز المائي باستخدام تقنية الصب مع نسب وزنية مختلفة وهي (2, 5, 10, 15) من كبريتات المنغنيز المائي وقد تم دراسة الخصائص البصريه لها.وقد تضمن هذا العمل ايضا دراسة تاثير الظروف الجوية على الخصائص البصرية لكل النماذج المعرضة.كل النماذج المعرضة وغير معرضة للظروف الجويه شخصت بطرق مختلفة مثل التحليل الطيفي لاشعة تحت الت الحمراء (FTIR)وصور المجهر الضوئي.اظهرت النتائج التجريبية ان طيف الامتصاصيه يزداد بزيادة تركيز كبريتات المنغنيز المائي. فجوة الطاقة تقل بزيادة تركيز الاضافة. وقد تم دراسة الثوابت البصرية الاخرى والتي تشمل (معامل الامتصاص, معامل الخمود, معامل الانكسار, ثابت العزل الحقيقي والخيالي).بعدتعريض النماذج للبولي فينيل الكحول النقي وللمتراكبات (PVA - MnSO4.H2O) وبتراكيز مختلفه وجد ان طيف الامتصاص يزداد بزيادة فترة التعريض. فجوة الطاقه تقل بزيادة فترة التعريض. وقد تم دراسة الثوابت البصريه الاخرى والتي تشمل (معامل الامتصاص, معامل الخمود, معامل الانكسار, ثابت العزل الحقيقي والخيالي).وقد بين طيف (FTIR) عدم وجود تفاعل كيميائي بين المادة المضافة والبوليمر وليس هنالك تكسر بالاواصر الاساسيه لهما بعد التعريض للظروف الجوية, واظهرت صور المجهر الضوئي ان كل النماذج تصبح اكثر خشونة بعد التعريض. | In this study, (PVA - MnSO4.H2O) films are prepared by using casting technique with different concentration of Manganese (II) sulfates monohydrate (2, 5, 10 and 15) wt.% . Also the optical properties is studied, and this work is involved with study the effect of weathering condition of optical properties for all samples which exposure. All the samples that exposure and unexposure to weather conditions have diagnosed by different methods such as fouirer transform infrared spectroscopy (FTIR) and optical microscope images. The experimental results show that the absorption spectrum increased with increasing the concentration of (MnSO4.H2O). The optical energy gap decreasing with increasing of the concentration of the additive. The optical constants (absorption coefficient, extinction coefficient, refractive index, real and imaginary dielectric constants) are studied. After exposure the samples in the form of pure PVA and (PVA - MnSO4.H2O) composites with different concentration found that the absorption spectrum increases with increases exposure time. The optical energy gap decreasing with increasing exposure time. The optical constants (absorption coefficient, extinction coefficient, refractive index, real and imaginary dielectric constants) are studied. The FTIR shows no chemical interaction between the Polymer and the additives and there are no broken fundamental bands after exposure to the weather conditions. Morphological photographs illustrate that the surface of all films become more roughness after exposure.

تصميم وتصنيع الطلاء المضاد للانعكاس معتمدين طريقة الليزر النبضي في الترسيب == DESIGN AND FABRICATION OF ANTI REFLECTION COATING BY PULSED LASER DEPOSITION

Author name: زينب حازم عبد الرحيم
Supervisor name: الاء نزار عبد الغفار | كاظم عبد الواحد عادم
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: في هذا العمل تم تصميم طلاء المضاد للانعكاس بسمك ربع ولاربع طول موجي ودراسة خصائص بصرية للاغشية الرقيقة والاستفادة منهما في تصنيع طلاء مضاد للانعكاس ضمن المنطقة المرئية والحمراء القريبة . اعتمد تصميم الطلاء على مفهومين اساسيين هما نظرية المصفوفة المميزة وتصميم طلاء بسمك ليس ربع طول موجي ولحالة السقوط العمودي للضوء.اخذين بنظر الاعتبار ظاهرة التشتت. تم دراسة نفاذية وانعكاسية الطلاء كدالة للتغير في الطول الموجي للضوء الساقط باستخدام الرزمة البرمجية MATLAB. اوضحت نتائج التصميم امكانية الحصول على انعكاسية واطئة لمدى واسع من الطيف الكهرومغناطسي يشمل المنطقة المرئية ومنطقة الحمراء القريبة عندما يكون السمك البصري ضمن المدى اقل 0.7L لمادة MgF2 المرسبة على الزجاج ويكافي الاسماك الهندسية للغشاء (34.5,36.91,78.3) نانومتر, وامكانية الحصول على انعكاسية واطئة لمدى واسع في درجة حرارة التلدين عند سمك البصري 1.2L ويكافى السمك الهندسي ((141.6 نانومتر. تكتسب هذه النتيجة اهميتها في امكانية تخمين السمك الامثل قبل البدء بمرحلة التحضير حيث اشارت النتائج الى معادلة تجريبية تربط بين عدد النبضات وسمك الغشاء. لغرض تصنيع الطلاءالبصري, تم استخدام طريقة الترسيب بالليزر النبضي لليزر النيديميوم - ياك1064 نانومتر الذي يعامل بتقنية التولد المتوافق الثاني بطول موجي 532 نانومتر والذي يعمل بتقنية عامل النوعية بمعدل تكرارية (1 - 6) هرتز وامد نبضة 10 نانوثانية. لتحضير اغشية فلوريد المغنيسيوم المرسبة على الزجاج, قمنا بدراسة ظروف التحضير التي تتضمن التغير بعدد النبضات (150و250 و350و 450 نبضة) لترسيب اغشية فلوريد المغنيسيوم ومدى تاثيرهم على سمك الاغشية المحضرة وتركيبها وحجم الحبيبات وبالتالي على نفاذيته ومدى امكانية استخدامه كطلاء مضاد للانعكاس. لقياس سمك الاغشية المحضرة, تم استخدام جهاز مقياس اللبسومتر وتم استخدام جهاز المطياف لايجاد النفاذية والانعكاسية والثوابت البصرية ومعاملي الانكسار والتوهين (n, k) وعلى التوالي. اوضحت النتائج بان الطلاء المضاد للانعكاس المحضر من طبقة واحدة يمتلك نفاذية عالية وانعكاسية واطئة تشمل منطقتين من الطيف المرئية والحمراء القريبة وان معامل الانكسار يتراوح بين (1.05 - 1.25( في حين كانت اسماك الاغشية المحضره تتراوح بين )34.5 - 141.6 ) نانومتر, كذلك اوضحت صور (AFM) بان الحجم الحبيبي يتراوح ضمن المدى (86.55 - 94.81) نانومتر. | In this work design and fabricated antireflection coating (AR’C) with single layer. Design of the AR’C was based on the characteristic matrix method with quarter and non - quarter optical thickness. The effect of deposited material at normal incident of light was taken into account and the reflection performance was computed with the aid of MATLAB over the visible and near infrared region. Results show that wideband AR’C was achieved when deposited thin film of MgF2 on glass with non - quarter optical thickness less 0.7L related to geometrical thickness (34.5,36.9,78.3 nm) at room temperature. Also wideband AR’C achieved with non quarter 1.2L optical thickness deposited related to geometrical thickness (141.6nm) at annealing temperature. However results accept significant importance to estimate the optimum thickness before preparation stage. In this study antireflection coating fabricated by using pulsed laser deposition technique (PLD) which deposit MgF2film on glass substrate. Q - switching Nd : YAG laser beam with second harmonic generation (SHG) technique of wavelength 1064 nm and 532 nm, repetition rate 1 - 6 Hz and the pulse duration 10 ns was used. The film thickness, structural behavior and grain size dependent on that prepared conditions which include variation number of shot (150,250,350,450 pulses) have been studied.The thicknesses of MgF2 nanostructure films were measured using Lipsometre. Further, the experimental results shows high transmittance, wideband low reflection and the refractive index within the range (1.05 - 1.25), while the thicknesses are (34.5 - 141.6 nm). Atomic force microscope (AFM) image illustrate that the grain size of the film within the range (86.55 - 94.81) nm

الخواص التركيبية والبصرية والكهربائية لاغشية اوكسيد النيكل المحضرة بطريقة الترذيذ كمتحسس غازي == The structural, optical and electrical properties of NiO films prepared by RF - Sputtering as gas sensor

Author name: زينب طارق عبد الحميد
Supervisor name: قاسم عزيز محمد | محمد عبد النبي
General topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: The structural, optical, electrical, and gas sensing properties of nickel oxide have been studied. The structural properties of the deposited films were made using XRD, SEM and AFM. The NiO films have been prepared with different thicknesses (100, 150 and 200) nm on glass, Si and Al2O3 substrates, using RF - sputtering at 100°C substrate temperature. The electrical and optical parameters of the NiO films were characterized using Hall Effect and transmittance measurements.The X - ray diffraction result indicates that the films are of polycrystalline in nature with cubic structure. The grain size of the nanoparticales observed at the surface depended of films thicknesses, where 200 nm has smallest average grain size 85.5 nm and RMS increased with increasing of thicknesses.The optical characterization shows that the film has band gap that ranged in between 3.6 eV to 3.9 eV, the average transmittance of films was found to be ranged of 60% to 85% in the VIS - IR regions. The dark conductivity of NiO films has been studied as a function of film thickness, crystal structure transformation and temperature with particular regard to gas sensitivity in CO2, NO2, CO, NO and the ethanol vapor. The electrical properties were found to be dependent on the film thickness.I - V characteristics for NiO films at (air, vacuum, N2, O2andCO2) gases before and after annealing were investigation. It would appear from our result that the diminution of the dark conductivity after annealing may be due to the surface contaminations adsorbed on the surface of the NiO film during film preparation or from ordinary atmospheric air.The resistivity of the NiO thin films decreased with increasing of thicknesses, from 1.5x105 to 5.4x104 (Ω.cm), which is related to the increase of carrier concentration with film thickness. The results of measurements of NiO thin films show that these films have good conductivities and results obtained from Hall Effect indicate that the NiO films were (p - type).It was found that the sensitivity to other gases differs for different film thicknesses and working temperature. Furthermore, NiO films exhibits high and fast response to NO2 gas at 200°C, which makes it a promising candidate for a poisonous gas sensing.

تصميم وتصنيع طلاء بصري مضاد للانعكاسية متعدد الطبقات لمجمعات الطاقة الشمسية الحرارية ذات التزجيج الملون == Design and Fabrication of Optical Multilayer Anti - reflection Coating for Colored Glazed Thermal Solar Collectors

Author name: زينب ارحيم حسين الاسدي
Supervisor name: عبد الحسين خضير لطيف | امال محمد الحلو
General topic: Physics
Specific topic: Solar Energy Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: يلعب الجانب الجمالي للمجمعات الشمسية الحرارية دورا هاما في تكامل واجهات المباني ويستند المظهر الملون الى مبدا التداخل لطلاء الاغشية الرقيقة على الجانب الاخر من الغطاء الزجاجي . ان وجود طبقات متعددة للمرشحات البصرية التداخلية على المجمعات المزججة يمكن ان ينتج انعكاس ملون في المنطقة المرئية ولا يحدث المظهر الملون خسائر مفرطة للطاقة بينما ينفذ الجزء غير المنعكس في منطقة الاشعة تحت الحمراء القريبة داخلا على شريط الامتصاص لزيادة كفاءة المجمع الشمسي الحراري . تقدم هذه الدراسة فكرة بسيطة للحصول على تزجيج ملون لاخفاء اللون الاسود والانابيب الظاهرة وتموجات شريط الامتصاص المعدني للمجمعات الشمسية الحرارية والتي تعتبر عقبة اساسية في تكامل المجمعات الشمسية الحرارية كواجهات للمباني وذلك بتصميم طبقات متعددة لمرشحات بصرية تداخلية من خلال محاكاة نظرية ومن ثم تصنيع هذه التصاميم عمليا ومقارنة النتائج عمليا ونظريا . تـم توظيـف مواد عازلة ملائمـة مثـل ثنائـي اوكسيد السليـكون (SiO2)ذو معامـل الانكسار العالـي nH =1.47 ومغنيسيوم فلورايد (MgF2) ذو معمل الانكسار الواطيء nL =1.38 وبسمك ربع طول موجي (H) و(L) لمعامل الانكسار العالي والواطيء على التوالي . استخدام برنامج الماتلاب في جزء المحاكاة النظري والذي صمم لهذه الدراسة . تم تصميم نموذجين بصريين كما تم استخدام نوعين من القواعد الزجاجية . ان اول نموذج بصري هو HL//glass لقيمتين من الطول الموجي المستخدم للتصميم (0) = 558 نانومتر و700 نانومتر ومن 2 - 40 طبقة . تم استخدام نوعين من القواعد الزجاجية ، النوع الاول شريحة زجاج مجهرية ذات معامل انكسار 1.5131 استخدم في هذا النموذج البصري طولين موجيين للتصميم 0 = 558 نانومتر و700 نانومتر ، النوع الثاني من القواعد الزجاجية هو BK7 ذو معامل الانكسار 1.515 استخدم في هذا النموذج البصري عندما طول موجة التصميم 0 = 700 نانومتر . النموذج البصري الثاني LH//glass تم باستخدام قاعدة زجاجية لشريحة مجهرية ولطول موجة التصميم واحد وهو 0 = 558 نانومتر من 2 - 40 طبقة . هذه التصاميم صنعت عمليا باستخدام تقنية الترذيذ بالتردد الراديوي ذو المغناطيس المستوي ، عشر طبقات رسبت بالتعاقب على شريحة زجاجية مجهرية من (SiO2) ذو معامل الانكسار العالي (H) و(MgF2) ذو معامل الانكسار الواطيء (L) على التوالي للتصاميم البصريةHL//glass وLH//glass عند طول موجة التصميم 0 = 558 نانومتر . كذلك عشر طبقات رسبت على القاعدة الزجاجية BK7 للنموذج البصري HL//glass عند 0 = 700نامومتر ولكن عند استخدام القاعدة الزجاجية للشريحة المجهرية للنموذج البصري HL//glass عند 0 = 700 نانومتر رسبت 16 طبقة من هاتين المادتين العازلتين . اظهرت المحاكاة الحاسوبية السلوك البصري لهذه المرشحات من 2 - 40 طبقة ولاعداد فردية وزوجية من الطبقات مثل الانعكاسية المرئية (Rvis.) ، الانعكاسية الشمسية (Rsol.) ، اعظم قمة لمنحني طيف الانعكاسية في المنطقة المرئية (RMax.) ، النفاذية الشمسية (Tsol.) وعامل الجدارة (M) . عمليا تم حساب (RMax.) و(Rsol.av.) و(Tsol.av.) . ان التحدي في هذه الدراسة هو ايجاد افضل نموذج بصري يمتلك اقل انعكاسية شمسية (Rsol.) واعظم نفاذية شمسية (Tsol.) لزيادة كفاءة المجمع الشمسي الحراري وفي نفس الوقت الحصول على انعكاس ملون يكسب المجمعات الشمسية الحرارية التي تستخدم كواجهات للابنية جانب جمالي . لقد وجد عمليا ان التصميم البصري الثاني (L/H//microscopic glass slide) عند0 = 558 نانومتر يمتلك اقل (Rsol.) واعلى (Tsol.) من البداية عند طبقتين حتى الوصول الى الطبقة العاشرة والتي تمتلك (Rsol.) =18.56025 % و(Tsol.) = 81.33469 % لذلك يمكن اعتبار هذا النموذج هو افضل نموذج بصري يمتلك اعلى كفاءة شمسية حرارية ويظهر انعكاس ملون (اخضر) جيد . لكن يعتبر عمليا النموذج البصري الاول (H/L//microscopic glass slide) عند0 = 700 نانومتر هو افضل نموذج بصري يستخدم للتلوين . ان المرشحات البصرية التداخلية متعددة الطبقات تظهر في هذه الدراسة انعكاس ملون اخضر في المدى المرئي ونفاذية مقبولة ومنطقة مضادة للانعكاسية في مدى الاشعة تحت الحمراء القريبة . بالرغم من زيادة طول موجة التصميم(0) عمليا من 558 الى 700 نانومتر تبقى هذه المرشحات تظهر انعكاس ملون اخضر .نجحت هذه الدراسة منذ البداية في اظهار ان الطلاء الترذيذي متعدد الطبقات حقق المتطلبات التالية : ا - امتصاصية شبه صفرية .ب‌ - قمة انعكاسية لونية في المنطقة المرئية .ت‌ - نفاذية شمسية مقبولة . | An aesthetic aspects play an important role in facades integration buildings of the thermal solar collectors , the principle of the colored appearance is based on interference in the thin - films coating on the reverse side of the cover glass . The presence of multilayered optical interference filters on the collector glazing can produce a colored reflection in the visible region , the colored appearance should not cause excessive energy losses , while transmitting the non - reflected radiation in the near IR region entirely to the absorber sheet to increase the efficiency of the thermal solar collector . This study presents simple idea to get a colored glaze to hide the black color, and the visibility of tubes and corrugations of the metal sheet (absorber) of the thermal solar collectors which is considered the main obstacle to facade integration buildings of solar thermal collectors by designing a multilayer optical interference filters during theoretical simulation and fabricate these designs experimentally then compare the theoretical and experimental results . Appropriate dielectric materials, silicon dioxide (SiO2) of high refractive index nH =1.47 and magnesium fluoride (MgF2) of low refractive index nL =1.38 were employing with quarterwave thicknesses (H) & (L) for high and low refractive index layers respectively . In theoretical simulation part a matlab program has been used which was designed for this study . Two optical models were designed and two kinds of glass substrates were used . The first optical model is HL//glass , for two design wavelength values (0) 558 nm and 700 nm from 2 - 40 layers . Two types of glass substrate were used , the first one was microscopic glass slide substrate with refractive index 1.5131 , it was used in this optical model two types of design wavelength (0) = (558 & 700) nm , the second kind of glass substrates was BK7 (Borosilicate Crown) glass with refractive index 1.515 it was used in this optical model when the design wavelength 0=700 nm . The second optical model is LH//glass by using microscopic glass slide substrate for one design wavelength is 0= 558 nm and for 2 - 40 layers. These designs were fabricated experimentally by using RF planer magnetron sputtering technique , 10 layers for high refractive index (H) (SiO2) and low refractive index (L) (MgF2) were deposited alternately for the optical models HL//glass and LH//glass at 0= 558 nm on the microscopic glass slide . Also 10 layers were deposited on BK7 glass substrate for the optical model HL//glass at 0= 700 nm but by using microscopic glass slide substrate for the optical model HL//glass at 0= 700 nm there were 16 layers deposited from these two dielectric materials . The computer simulation exhibit the optical behavior of this filters from 2 - 40 layers and for odd and even numbers of layers such as visible reflectance (Rvis.), solar reflectance (Rsol.), maximum peak of reflectance spectrum curve (RMax.) in the visible region , solar transmittance (Tsol.) and merit factor (M) . Experimentally (RMax.) , (Rsol.av.) and (Tsol.av.) were calculated . The challenge in this study is to find the best optical model which has less (Rsol.) and larger (Tsol.) to increase the efficiency of the thermal solar collector and in the same time get the colored reflection to gain esthetic aspect for the thermal solar collectors which was used as building facades . It is found experimentally that the second optical model (L/H//microscopic glass slide) at 0= 558 nm have low (Rsol.) and high (Tsol.) from the beginning at 2 layers until reaching the 10 layer which has (Rsol.)= 18.56025 % and (Tsol.)= 81.33469 % , therefore this model can be considered as the best optical model which has higher solar thermal efficiency and exhibits good )green( colored reflection . But the first optical model (H/L//microscopic glass slide) at 0= 700 nm was considered experimentally the best optical model used for coloration . The multilayer optical interference filters in this study exhibit green colored reflectance in the visible range and acceptable transmission and antireflection region in near IR range . Despite the increase in design wavelength (0) from 558 nm to 700 nm . These filters experimentally remain exhibit green colored reflection . This study was succeeded at the first attempt to show that a sputtered multilayer coating can fulfilled the requirements

تحضير ودراسة الخصائص الامتصاصية لاكاسيد الفيرايت باستخدام طريقة السيراميك == Preparation and Study the Absorption Properties of Ferrite Oxides using Ceramic Method

Author name: زياد طارق اسماعيل العبوسي
Supervisor name: كاظم جواد كاظم الشجيري
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: Compounds of ferrimagnetic materials were prepared in this work in order to investigate and evaluate the microwaves absorption at X - band with the range of frequencies (8 - 12.5 GHz) and Ku - band with the range of frequencies (12.5 - 18 GHz). And the second band is used for the first time in Iraq.Conventional Ceramic techniques (the solid state reaction method) were used to prepare three compounds of spinel ferrite : Cu - Zn ferrite, with formula (Cu1 - xZnxFe2O4), Mg - Zn ferrite, with formula (Mg1 - xZnxFe2O4), and Ni - Zn ferrite, with formula (Ni1 - xZnxFe2O4) at values of x = (0.0, 0.1, 0.3, 0.4, 0.5, 0.6), where x is the proportion of zinc in the ferrite, as bulk (54) samples of rectangle in dimensions (22.6*10*10 mm) within in X - band refine it to make its dimensions (15.5× 7.5×10) mm within in the Ku - band.The resonance peaks of three types of spinel ferrite appeared at the frequencies (9, 10, 11, 14, 15, 16, 17) GHz, and these peaks remain at the same frequencies with a different thickness for all types of ferrite, this indicates that the peaks are not related to thickness.For all samples it was found that the effect of increase the thickness and sintering temperature increased the values of attenuation and absorbance. And the best values of the absorbency were in the range of (Ku - band).The value of total transmission and the absorbance is 100% for sample of (Ni0.9Zn0.1Fe2O4) were the best values at (1050) °C then (14) GHz.The best results were obtained in this research, and the best values of absorbance and stability are (CuFe204, Cu0.9Zn0.1Fe2O4, Cu0.9Zn0.1Fe2O4,Cu0.4Zn0.6Fe2O4) that had been burned by (1000, 1050, 1100, 1050) respectively. These samples were range of (Ku - band).The best result was similarity in behaviour of absorbance for the sample (Mg0.6Zn0.4Fe2O4) at the range (X - band).X - ray diffraction results showed that the structure was polycrystalline for all samples and for all (X) values.The density of samples greatly depends on the temperature of sintering, witch increases proportionally with the temperature of the sintering

تراكيز النويدات الطبيعية والصناعية في نماذج بيئية مختلفة لمدينة العمارة - محافظة ميسان == Natural and Artificial Radionuclide Concentrations for different Environmental Samples in AL - Amara city - Missan Governorate

Author name: زهراء عبد الحسين اسماعيل السوداني
Supervisor name: خالد هادي مهدي العبيدي
General topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: الهدف من هذه الدراسة يتضمن جزئين الجزء الاول يتمثل بتقييم مستوى النشاط الاشعاعي الطبيعي والصناعي للعينات البيئية (تربة سطحية ,ومياه نهر دجلة , ومياه محطات التصفية ,ورواسب نهر دجلة) التي جمعت من مواقع مختلفة في مدينة العمارة - محافظة ميسان باستعمال تقنية مطيافية اشعة كاما مع كاشف الجرمانيوم عالي النقاوة (HPGe) ذي الكفاءة 40% وقدرة تحليل 1.8keV للطاقة 1.33MeV العائدة لنويدة الكوبلت - 60 وذلك لقياس الفعالية النوعية لليورانيوم - 238والثوريوم - 232 والبوتاسيوم - 40 والسيزيوم - 137 للوقوف على المستويات الاشعاعية, فضلا عن حساب مؤثرات الخطورة الاشعاعية لاشعة كاما (فعالية الراديوم المكافئة (Raeq),ومعدل الجرعة الممتصة في الهواء(Dɣ),والجرعة الفعالة السنوية للتعرض الخارجي (〖AEDE 〗_out) والداخلي (〖AEDE 〗_in),ودليل الخطورة الخارجي(Hex) والداخلي (Hin),ودليل الخطورة لاشعة كاما I_γ))) في النماذج البيئية المذكورة انفا.وقد بينت نتائج الدراسة الحالية ان معدلات الفعالية النوعية لليورانيوم - 238 والثوريوم - 232 والبوتاسيوم - 40 والسيزيوم - 137 ومعدلات مؤثرات الخطورة الاشعاعية لاشعة كاما في العينات البيئية كانت جميعها اقل من الحد المقبول به عالميا.اما الجزء الثاني من هذه الدراسة هو قياس تراكيز غاز الرادون في العينات البيئية (تربة سطحية ,ومياه نهر دجلة ,ومياه محطات التصفية ,ورواسب نهر دجلة ,وهباء الهواء) التي جمعت من مواقع مختلفة في مدينة العمارة - محافظة ميسان ,وذلك باستعمال تقنية كواشف الاثر النووي للحالة الصلبة نوع (CR - 39),فضلا عن حساب مؤثرات الخطورة الاشعاعية لغاز الرادون (محتوى الراديوم الفعال (CRa) ,و معدل الانبعاث الكتلي للرادون (EX(M)) ,و معدل الانبعاث السطحي للرادون (EX(S)) ,و مؤشر الفا (Iα) ,والرادون المذاب Cd)) ,و الجرعة الفعالة السنوية للرادون AEDw))) في النماذج البيئية المذكورة انفا.و بينت نتائج الدراسة الحالية ان معدلات تركيز الرادون - 222 في العينات البيئية كانت جميعها اقل من الحد المقبول به عالميا.يستنتج من هذه الدراسة ان بيئة مدينة العمارة هي ضمن الخلفية الاشعاعية الطبيعية . | The aim of this study includes two parts, the first part is to assessment level of natural and artificial radioactivity of environmental samples (surface soil, water of the Tigris River ,water filtering stations and sediments of the Tigris River) collected from various locations in AL - Amara city - Missan government using gamma - ray spectroscopy technique with High purity Germanium detector (HPGe) which has a photo peak relative efficiency of( ≥40 % ) and an energy resolution of (≤1.8 keV) for the 133 MeV gamma transition of 60Co to measure Specific activity concentration of 238U, 232Th, 40K and 137Cs, Also Evaluation of radiological hazard effects for Gamma ray (Radium Equivalent Activity (Raeq), Absorbed Dose Rate in Air (Dɣ), Annual effective dose outdoor (〖AEDE 〗_out) and Annual effective dose indoor(〖AEDE 〗_in), Hazard index outdoor )Hex( and Hazard index indoor) Hin (and gamma Index (I_γ)) In environmental samples listed above.The results of the present study have shown that the rates of Specific activity of 238U, 232Th, 40K and 137Cs and radiological hazard effects Rate for Gamma ray in environmental samples were all lower than the value of the global limit.The second part of this study is to measure the concentrations of radon gas in environmental samples (surface soil , water of the Tigris River, filtering water stations , sediments of the Tigris River and dust air) which collected from various locations in AL - Amara city - Missan government using Solid State Nuclear Track Detectors type (CR - 39), In addition to Evaluation of radiological hazard effects for Radon gas (Effective radium content (CRa), Mass exhalation rate for Radon ????????(????), Surface exhalation rate for Radon ????x(????), Alpha index (Iα), Radon dissolved )Cd) and Annual effective dose )AEDw)) In environmental samples listed above.The results of the present study have shown that the rates of radon - 222 concentration in environmental samples were all less than the global limit.We conclude from this study that the environment of Amara city is within normal background radiation.

تصنيع ودراسة خواص معدن - فثالوسيانين العضويه كمتحسس حرارة == Fabrication and Study Properties of Organic Metal - Phthalocyanine as Temperature Sensor

Author name: رؤى مثنى علي
Supervisor name: ندى خضير عباس
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: Copper Phthalocyanine tetrasulfonic acid tetrasodium salt (CuPcTs) thin films with different annealing temperatures (100, 150 and 200)oC have been prepared by spin coating technique on glass & ITO substrate with speed rate of 1000 rpm for 1 min, the obtain films have 100±5 nm thickness. This dissertation deals with different measurement techniques (Thermal, Structure, Morphological, Optical and Electrical measurements) in order to investigate the optimum condition to fabricate sensor device.The structures of CuPcTs thin films which deposited on glass substrate have been studied by X - ray diffraction (XRD), Atomic Force Microscope (AFM) and (FESEM) techniques, XRD studies show that thin films have polycrystalline structure for all annealing emperatures with perfect orientation (001). Also the surface morphology by AFM measurement for CuPcTs thin films has been studied; it shows that all films after heat treatment go to Nano size. The roughness decreases with increasing temperatures, and by (EDX) technique the elemental ratios of thin films are determined.The optical measurement showed that the as - deposited and annealed films have two peaks which are (B, Q1and Q2) bands, B in Ultra Violet region attributed to transition between d level for Cu metal and π* in LUMO, and Q bands in Visible region attributed to the transition between π(HOMO) - π* (LUMO). These measurements demonstrated that the energy gap of CuPcTs depends on the annealing temperatures, the photoluminescence spectra (PL) showed the traps inside energy gap play an important role and effect onoptical behavior. It’s studied to confirm the results of optical band gap, FTIR spectra give results about the bonds of (CuPcTs) and its position compared with H2Pc as a reference. The electrical properties of these films were studied with differentannealing temperature. Hall measurements showed by increasing thin films temperature the conductivity decreased at 100oC then it increase at 150oC finally it returned to decrease that may be due to phase transitions, all the films are p - type.CuPcTs Capacitive - Resistive surface type temperature device sensor has been fabricated by using two electrodes (Aluminum and Silver), the capacitive response of this sensor was observed by Raising the temperature gradually.Capacitive - Resistive temperature sensor showed that the response to variation of temperature in range (RT - 200)0C and the response time ≈ 20±5 Sec. for two electrodes, The fabricated sensor appear enough sensitivity and good response and recovery times and strong affected by frequency variation.Practical experience has shown results that aluminum electrode has capacitance and resistance higher than the silver electrode depending on the different frequencies values, while the silver electrode has the shortest response time.

تقييم المقاطع العرضية لليورانيوم للتفاعلات المستحثة بالنيوترون == Cross Sections Evaluation of Uranium for Neutron Induced Reactions

Author name: روناك اكرام علي
Supervisor name: ايمان طارق العلوي
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: لقد تم في هذا البحث حساب قيم المقاطع العرضية لنظائر اليورانيوم (A=230 - 238) للتفاعلات المستحثة بالنيوترونات التالية ,,,(n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), (n,γ), (n,p), (n,t), (n,d), (n,α), (n,2α),and (n,2p)المقاسة بفترات مختلفة من الطاقة حيث ان هذه القراءات تم اخذها من الوكالة الدولية للطاقة الذرية (IAEA ) ومن المكتبات المشهورة عالميا مثل EXFOR, CINDA, ENDF, JEFF, JENDL,ROSFOND,CENDL,WIND, TENDL, BROND, IRDF, EAF وقد تم قياسها في الفترة الاولى من منتصف القرن الماضي وحتى اخر سنوات الماضية .لقد تم تحليل المديات الكاملة للطاقة لكل تفاعل وقد تم اعادة حساب وتقييم المقاطع العرضية ضمن فترات صغيرة مختلفة حسب مديات الطاقة للنيوترون القاصف مع الاخطاء المرافقة لها. قد تم وضع صيغ رياضية لمتعددة الحدود في معظم التفاعلات والتي تربط بين تغيير المقطع العرضي مع الطاقة والتي يمكن استخدامها للتنبىء بقيم المقاطع العرضية غير المحسوبة. لقد تم حساب قيمة Q - للتفاعل وطاقة الربط وطاقة العتبة وفرق الكتلة وعامل الرص لكل تفاعل ولكل عنصر هدف. ان التقييمات اعتمدت بشكل رئيسي على حسابات نموذج الجهد البصري لقد اعتمدت الحسابات على معاملات الجهد البصري النووي حيث تم اختيار وجمع المعلومات من مكتبة (RIPL) التابعة للوكالة الدولية للطاقة الذرية. لقد قمنا بدراسة صيغتين مختلفتين لنموذج الجهد البصري حيث ان الصيغة الاولى تسمى نموذج الجهد البصري القياسي والمعاملات ماخوذة من مكتبة Beijing والصيغة الثانية لنموذج الجهد البصري قد تم حسابها بتحديد ثلاث مديات طاقية. لقد قمنا بدراسة نسبة التفاعل (n,f) لكل نظير من نظائر اليورانيوم نسبة الى يورانيوم - 235 والذي يعتبر نموذج قياسي. لقد قمنا بحساب هذه النسبة لجميع التفاعلات المتوفرة لدينا وليس فقط تفاعل الانشطار واحتسبناها نسبة الى يورانيوم - 235.حساب اخر تم اضافته الى هذه الدراسة وهو دراسة تاثير التلوث لوليدة اليورانيوم - 237 والتي هي نبتونيوم - 237 بعمر نصفي 6.8 يوم وكذلك حساب الفيض النيوتروني لكل منهما. | The cross sections of Uranium isotopes (A=230 - 238) for the (n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), (n,γ), (n,p), (n,t), (n,d), (n,α), (n,2α),and (n,2p) reactions are calculated with different energy intervals which are collected from International Atomic Energy Agency (IAEA). The available cross sections data for the reactions mentioned above are collected from the well known international libraries like EXFOR, CINDA, ENDF, JEFF, JENDL, ROSFOND, CENDL, WIND, TENDL, BROND, IRDF, EAF and measured during the period from the middle of the last century up to several years ago.The cross sections are reproduced in fine steps of incident neutron energy in different intervals with the corresponding errors. The recommended cross sections for all available experimental data have been calculated for all considered reactions mathematical representative equations for all these reactions are formulated. These equations represent the variation of the cross section with energy, which could be used to predict the values of uncalculated cross sections.Q - value, threshold energy, binding energy, mass excess, and packing fraction for each reaction and target element have been also calculated.The evaluations are based mainly on the calculations of the optical model potential. The calculations are based on the nuclear optical potential, where the relevant parameters are collected and selected from Reference Input Parameter Library (RIPL) which is being developed under the international project coordinated by the International Atomic Energy Agency (IAEA). We study two different formula for optical model potential the first formula is the standard optical potential model and its parameters are taken from Beijing library. The second formula is the optical potential with different energy ranges. We study the ratio of the (n,f) cross sections for each Uranium isotopes relative to (n,f) cross section for U - 235 which could be considered as a standard sample. We have done the ratio not for the (n,f) cross sections only but also for other reactions like ,(n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), and (n,γ) relative to U - 235 reactions cross sections.Another evaluation is added to cross sections is the effect of the contamination of the daughter of U - 237 which the daughter is Np - 237 6.8day and their relative flux

دراسة تاثير المعاملة الحرارية على الخواص التركيبية والميكانيكية لبوليمر (بولي تيترافلورواثيلين) == Study the Effect of Heat Treatment on the Structural and Mechanical Properties for poly (tetrafluoroethylene

Author name: رند باسم لطفي الكرخي
Supervisor name: مي عبد الستار محمد نجيب
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: درس في هذا العمل نوعين من بولي تيترافلورواثيلين ( النقيين ولكن باختلاف الشركة المصنعة PTFE) (صيني _اماراتي ) بطريقه صب المحلول كافلام رقيقه واشرطة , بواسطه الخواص التركيبيه (حيود الاشعه السينيه ومسعريه المسح التفاضلي ) والخصائص الميكانيكية بدلاله درجات حراره مختلفة للدوره الحرارية . يبين كلا النوعين تغير في الشده المستطاره من المستوى القاعدي (100) عند تغير درجه حرارة الدورة الحرارية واظهر النوعين زيادة في التبلورية مع زياة درجة الحرارة .كذلك اختلاف في الانثالبي عند اختلاف درجات الحرارة حيث لوحظ زياة الانثالبي بزيادة درجة الحرارة واختلاف في الخصائص الميكانيكيه ( الاجهاد والانفعال عند نقطة الخضوع ونقطه الكسر ومعامل يونك) للبوليمر حيث اظهرت المعالجة الحرارية للبوليمر بدرجات حرارة مختلفة من اجل معرفة خصائصه ومقاومته الى الظروف البيئية ان الخواص الميكانيكية تزداد زيادة خطيا مع زيادة درجة الحرارة .لوحظ بان انتاج الشركه المصنعة الصينية افضل من ناحية النتائج لايجاد درجة التبلورية والخصائص الميكانيكيه عن انتاج الشركة المصنعة الاماراتية لنفس المادة البوليمرية | In this study two modifications of pure polytetrafluoroethylene (PTFE) [C2F4]n. China_UAE source prepared from solution cast as film and strip have been studied by structural (X - ray diffraction (XRD), Differential Scanning Calorimetry (DSC)) and mechanical properties .subjected to different temperature heating cycle. Both modifications show variation in the scattered X - ray intensity of the basal plane (100) as the temperature of heating cycle is changed and show increasing in crystallinity with the increase of temperature .Moreover, the Enthalpy of each kind is changed with difference of heat treatment where the enthalpy increase with the increase of temperature, and two modifications show different in mechanical properties for PTFE (young's modulus, stress at break, stress at yield, elongation at yield. And elongation at break) when the temperature is change ,The heat treatment of polymer to different temperatures in order to know its properties and resistance to environmental conditions results showed that the mechanical properties increase linearly with the increase of temperature.It seems that the product company of china is better than the product company of UAE in degree of crystallinity and mechanical properties for this polymer.

الدراسه النظريه لتصميم ماكنه بؤره البلازما وتحقيق العوامل المختلفه التي تؤثر على حصيله النيترون المنبعث == Theoretical study to design plasma focus machine and investigate various parameters that affect its emitted neutron yield

Author name: رنا عيســـى بــك مــــراد
Supervisor name: مصطفى كامل جاسم | رعد حميد مجيد
General topic: Physics
Specific topic: Plasma Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: في هذا البحث تم تصميم جهاز بؤرة البلازما الكثيفة نظريا بالاعتماد على موديل (لـــي) بناءا المعادلات الرياضية لنموذج لي لكل من هندسة القطبين وعناصر الدائرة الخارجية التي تضم متسعة ومحاثة ومقاومة (RLC). وبعد اجراء الحسابات اللازمة تم ادخال نتائج التصميم في برنامج لرؤية مدى امكانية تشغيله نظريا من خلال دراسة المعلمات المختلفة التي يوفرها البرنامج وبالتالي التعرف على ظروف تشغيله والعوامل المؤثرة عليه. لقد اختير غار الديترويوم كغاز عامل في هذه المنظومة للحصول على ناتج نيتروني من اجل التفاعل النووي الاندماجي. وتم اختبار ودراسة المنظومة عند ضغطين مختلفين (3و4 تور) حيث درست مختلف معلماتها التي يوفرها البرنامج ونوقشت وقورنت النتائج بالاشكال البيانية. اضافة لذلك تمت مقارنة المنظومة المصممة مع منظومة قياسية تناظرها من حيث التركيب النظري وهي منظومة NX2 التي بنيت اساسا للحصول على الاشعة السينية باستعمال غازات النبيلة. اختير في البحث ان يكون غاز الديتريوم هو الغاز العامل للحصول على ناتج نيتروني من اجل المقارنة، حيث درست جميع معلمات التشغيل للمنظومة المصممة مع القياسية بالرسوم البيانية.لقد وجد من خلال انجاز الحسابات اللازمة بان الشكل البياني لانحدار تيار الانبوب الكلي (dip) مباشرة بعد قمة التيار مع الزمن للمنظومة المصممة متفق تماما مع الشكل العام المميز لمنظومات بؤرة البلازما التجريبية دلالة على ان حسابات التصميم صالحة لهذه المنظومة وبالتالي يمكن اجراء الحسابات. ان تصرف فولتية الانبوب مع الزمن للمنظومة المصصمة كان بنفس الشاكله مع المنظومة القياسية. وينطبق هذا على سلوك المعلمات الاخرى بين المنظومتين مثل السرعة والمسار المحوريان والمسار الى الداخل للصدمة الشعاعية ومسار وسرعة استطالة القرص ومسار وسرعة الصدمة المنعكسة شعاعيا وغيرها.تم دراسة ومقارنة تغيرات درجة حرارة البلازما مع الزمن للمنظومتين عند نفس الضغط ولضغطان مختلفان للمنظومة المصممة وكان تصرف ماكنتا بؤرة البلازما بنفس الطريقة. وتم حساب الخسائر المتولدة من الماكنتان مثل خسائر جول وبرمنشتهالنك واعادة الاتحاد وخسائر الطاقة الشعاع الخطي مع الزمن. اخيرا وجد ان المنظومة المصممة ( 1.66 × neutron per shot ) توفر ناتج نيتروني اكبر من المنظومة القياسية (5.15 × neutron per shot) . لقد تصرفت المنظومة المصممة مثل المنظومة القياسية لكن كان الاختلاف في سلوك المنظومة المصممة والقياسية هو اختلاف الترتيب الهندسي للمنظومتين من حيث هندسة الاقطاب واختلاف قيم العناصر الكهربائية للدائرة الخارجية. ان المنظومة المصممة نظريا في هذا البحث يمكن ان تكون مشروع لبناء ماكنة بؤرة بلازما تطبيقية للحصول على ناتجها النيتروني العالي للاستفادة منه في اجراء تفاعل الاندماج النووي.

تصنيع ودراسة خصائص كاشف المفرق الهجين Cdo/ Si المشاب والمحضر بطريقة الرش الكيميائي الحراري == Fabrication &Characterization Heterojunction Photodetector of Cdo/ Si by Spray Pyrolysis Technique

Author name: رفل صالح ساجت فياض
Supervisor name: سعاد غفوري خليل العاني | رائد عبد الوهاب اسماعيل
General topic: Physics
Degree: Master
University: University of Baghdad
Language: Arabic
University location: Baghdad
First pages:
Abstract: تم في هذا البحث تصنيع ودراسة خصائص كاشف المفرق الهجين نوع CdO/p - Si المشوب اذ حضرت اغشية اوكسيد الكادميوم(CdO) بطريقة الرش الكيميائي الحراري وبدرجة حرارة قاعدة ثابتة 380o C) ) وبالتراكيز المولارية M(0.1, 0.15, 0.2, 0.25) وشوبت بعنصري النحاس والالمنيوم بنسب (0.5%, 1%, 3%, 5%) على الزجاج وعلى شرائح من السليكون احادية التبلور (Single Crystal) من نوع p - type ذات اتجاهية بلورية (100) ومقاومية كهربائية (2 - 20 Ω.cm) ومن نوع n - type ذات اتجاهية بلورية(100) ومقاومية كهربائية (10 Ω.cm) وسمك يتراوح بين (400 - 600 nm) .ودرست الخواص التركيبية والطوبوغرافية والبصرية والكهربائية لغشاء CdO بتغير التركيز المولاري وبثبوت درجة حرارة القاعدة (Ts) لقد اوضحت نتائج حيود الاشعة السينية ان اغشية CdO ذات تركيب بلوري مكعب وان اعلى شدة كانت عند المستوي (111) , اوضحت النتائج البصرية ان قيم فجوة الطاقة تعتمد بشكل كبير على التركيز المولاري اذ وجدت ان قيم فجوة الطاقة لغشاء CdO النقي كانت تتراوح مابين 2.61 eV الى 2.34 eV ولوحظ ان فجوة الطاقة تبدا بالنقصان مع زيادة التشويب بالالمنيوم والنحاس مقارنة مع اغشية CdO النقية . حيث ان فجوة الطاقة عند التشويب بالنحاس كانت تتراوح مابين 2.5 eVالى 2.31 eV وتتراوح مابين 2.62 eV الى 2.48 eV عند التشويب بالالمنيوم.اوضحت نتائج قياس تيار - جهد للكاشف الضوئي ان مقدار عامل المثالية (Ideality factor) للكواشف المحضرة بمولارية وتراكيز اشابة مختلفة يزداد مع زيادة التركيز المولاري وان افضل قيمة له كانت بحدود 1.7 عند تركيز 0.5% وبالنسبة لشوائب النحاس وبحدود 1.8 بالنسبة لشوائب الالمنيوم بتركيز 0.5% .اظهرت نتائج قياسات الاستجابية الطيفية ان الكواشف المصنعة تعمل ضمن المنطقة الطيفية (400 - 850nm) ووجود قمتين لكاشف (CdO/Si) المشوب وغير المشوب الاولى تقع عند الطول الموجي (550 nm) والتي تعود الى غشاء CdO والثانية عند الطول الموجي (800 nm) والتي تعود الى السليكون. لقد اوضحت نتائج الاستجابية الطيفية للضوء الابيض ان الكواشف تمتلك خصائص خطية جيدة ولاوجود لمنطقة اشباع وان هذه الخصائص تحسنت بعد الاشابة.تم حساب الكشفية النوعية للكواشف المصنعة ووجد انها تتغير مع ظروف التحضير حيث ان اعلى قيمة لها كانت بحدود 6*1011(HZ1/2.W - 1.cm) عند الطول الموجي 500nm وبلغت 7*1011(HZ1/2.W - 1.cm) عند الطول الموجي 700nm للكاشف المصنع CdO : Al/Si المشوب بتركيز 5% . | We discussed in this research Manufacturing and study the detector hybrid retail properties type CdO/ P - Si the doping ,If film were prepared the Cadmium Oxide (CdO), by the way chemical spraying with tempratuer the constant base (380oC) And molar concentrations (0.1, 0.15,0.2,0.25)M. It was the doping for two element Copper and Aluminum with percentages (0.5%, 1%, 3%, 5%) on the glass and the slides of Silicon crystallization single from p - type With crystalline directional (100) and Electrical resistivity (2 - 20 Ω .cm) and from N - type With crystalline directional (100) and Electrical resistivity (10 Ω .cm) at thickness between (400 - 600 nm).We study the Characteristics Synthetic and Optical and Electrical the film CdO , by change molar concentrations with tempratuer the constant base (Ts) , I have explained the results X - ray diffraction that film CdO With a cubic crystalline structure And that the highest intensity was at the level of (111), The results showed of optical that value Energy gap the large dependent on molar concentrations , It was found the value Energy gap they were between (2.34 ev - 2.61 ev) and It was found simpel change in Energy gap when the doping by Copper they were between (2.31 ev - 2,51 ev) and Improving Energy gap when the doping by Alminum they were between (2.48 ev - 2.62 ev).The results measure Current - Potential the optical detector there Ideality factor the detector Prepared with tempratuer the constant base and different molar concentrations where the value increases with molar concentrations decreases, and the better value they were limited 1.7 when concentration 0.5% for Impurities Copper , And limited 1.8 for Impurities Alminum when concentration 0.5%.The result measure Responsive spectral the detector Manufacture the work with in Spectral region (400 - 850 nm) , And found two value the detector (CdO/ Si) the doping and undoping , The first located when wevelength (550 nm ), which return to the detector CdO , The second when wevelength (800 nm ), which return to the detector Silicon. It was found the value Specifc Detectvity the showed the better value they were the detector CdO : Al/ Si the doping concentration 5% it was about 6*1011(HZ1/2.W - 1.cm) at the Wavelength (500nm) and 7*1011(HZ1/2.W - 1.cm) at the Wavelength (700nm).I have explained the results Responsive spectral for white light that the detector has liner properties and this properties improving after at dopend.

المقاطع العرضية لتفاعلات القنص والجسيمات المشحونة لانتاج نظائر اليود الطبي المشع == Capture and Charged Particles Reactions Cross Sections for Production of Iodine Medical Radioisotopes

Author name: رغد سعدون محمد
Supervisor name: ايمان طارق العلوي
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: تعددت الوسائل التي يحاول الاطباء من خلالها الكشف المبكر عن الامراض السرطانية ومن ثم السيطرة عليها قبل ان تتفاقم ويصعب علاجها. ان اخر ما توصل اليه الطب الحديث للحد من انتشار هذه الامراض هو استخدام نظائر المواد المشعة في علاج بعض الامراض وتشخيص البعض الاخر حيث يلعب النشاط الاشعاعي المنبعث من انحلال النظائر المشعة مثل انبعاث الكترونات اوجر والبوزترونات واشعة كاما دورا هاما في التطبيقات الطبية التشخيصية والعلاجية, ان الانوية المشعة ذات الاعمار النصفية الصغيرة (بضع ساعات) تكون ملائمة للحالات التشخيصة وهذا مايسمى التصوير بواسطة الانبعاث البوزتروني (PET) او بقياس طاقة فوتون كاما المنفرد (SPET) حيث تعطي هذه التقنيات صور ثلاثية الابعاد للعضو المراد فحصه, اما الحالات العلاجية فان الاشعة المؤينة المنطلقة لمسافات قصيرة تكون ملائمة لاختراق الانسجة وتغير تركيب الحمض النووي للانسجة المصابة. هذه النظائر يتم انتاجها بواسطة معجلات او مفاعلات نووية خاصة لهذه الاغراض ومن ثم يتم التاكد من نقائها من الشوائب النووية التي تظهر في عملية الانتاج قبل اعطائها للمريض . مما تقدم تم اختيار نظائر اليود المشع (I; A= 119→126, 128, 130, 131) في هذه الدراسة لان معظم نظائره ذات اعمار نصفية ملائمة للحالات العلاجية والتشخيصية. ان الطرق الرئيسية لانتاج اليود هو باستخدام الاهداف , , والتي تضمنت 38 تفاعل مباشر و9 تفاعلات غير مباشرة. وقد تم حساب المقاطع العرضية لتفاعلات (p,γ)و (p,α)و(p,xn) و(d,xn) و(α,xn) لانتاج نظائر اليود المشع حيث تم تقييمها في العمل الحالي اعتمادا على القيم العملية المتوفرة في مكتبة (EXFOR) التابعة لوكالة الطاقة الذرية الدولية (IAEA) حيث احتوت مكتبة (EXFOR) على البيانات العملية للمقاطع العرضية المقاسة لعدة سنوات سابقة ولعدة باحثين حتى الوقت الحالي. ان افضل التفاعلات لانتاج I - 123 هما و, وكذلك افضل التفاعلات لانتاج I - 124 هما و, ولانتاج I - 125 فان افضل تفاعل هو كون هذه التفاعلات تتمتع بانتاج عالي وشوائب قليلة ضمن مدى طاقي قليل. وان افضل تفاعل لانتاج I - 131 هو التفاعل غير المباشر لاهميته باستخدامه في (SPET) لغرض تصوير الغدة الدرقية وكذلك لعلاج سرطان الغدة الدرقية. لقد تم تحليل مديات الطاقة الكاملة لكل تفاعل وقد تم اعادة حساب المقاطع العرضية بفترات صغيرة لطاقة البروتون او الديتريون او جسيمة الفا الساقط بلغت (0.01MeV) مع الاخطاء المرافقة لها. وبذالك تم حساب المقاطع العرضية المختارة لانتاج نظائر اليود المشع وايجاد معادلات الملائمة من نوع Polynomials لعدة مراتب n= 4→10 والتي تربط بين تغير المقطع العرضي مع الطاقة والتي يمكن استخدامها للتنبؤ بقيم المقاطع العرضية غير المحسوبة. لقد تم حساب مستوى الشوائب التي تظهر في عمليات انتاج النظائر التي لها اعلى تطبيقات طبية واختيار افضل منطقة ذات مدى طاقة يتم تحديده باستخدام السايكترون للحد من ظهور الشوائب النووية وتم الحصول على توافق جيد بين النتائج النظرية والنتائج العملية المتوفرة. لقد تم حساب قدرة الايقاف على اساس صيغة زكلر من اجل حساب ناتج (yield) كل تفاعل وحساب سمك الهدف. وقد تم حساب قيمة Q وطاقة العتبة وطاقة الربط والمقاطع العرضية لنظائر اليود المختارة. تم بناء البرامج الحسابية Recom.m وStopp.m وStopd.m وStopa.m وYield.m وImpurity.m في العمل الحالي باستخدام Matlab - 8 اضافة لاستخدام برنامج SRIM (2003) لاجراء الحسابات. | There are many ways in which doctors attempt to early detection of cancer and then control it before it worsen and becomes difficult to treat. The latest findings of modern medicine to reduce the spread of these diseases is the use of isotopes of radioactive Iodine in the treatment of some diseases and diagnosis of others where it plays radioactivity emitted from the dissolution of radioactive isotopes, such as the emission of Auger electrons, positrons and gamma rays which play an important role in medical applications of diagnostic and therapeutic. The half - life of radioactive nuclei with a few hours are appropriate for situations diagnostic and this called imaging by Positron Emission Tomography (PET) or Single Photon Emission Tomography (SPET). These techniques give a three - dimensional picture of the organ to be scan, either cases the therapeutic ionizing radiation emitted over short distances are appropriate to penetrate the tissue and change the structure of DNA of the infected tissue. These principals are produced by accelerators or nuclear reactors, especially for this purpose and then be sure of the purity of nuclear impurities that appear in the production process before giving it to the patient. Isotopes of radioactive Iodine (I; A= 119→126, 128, 130, 131) have been selected in the present work. Since they have suitable half - life that could be used for treatment and diagnostic. The main production routes, use , , targets, including 38 direct reactions and 9 indirect reactions. Exciitation functions for proton, deuteron and alpha particles for the reactions (p,xn), (p,α), (p,γ), (d,xn), (α,xn) (n,p) for the production of isotopes of radioactive Iodine have been evaluated using an experimental of energy of incident particles and cross sections published in the International Atomic Energy Agency (IAEA), especially (EXFOR) library which measured cross sections for different authors and for several years prior to the present. The best reactions for the production of Iodine - 123 are the reaction and reactions, while the best reactions for the production of Iodine - 124 are and reactions. For the production of Iodine - 125, the best reaction is , because it possesses less impurities and low energy ranges and higher yields. While the best indirect reaction for the production of Iodine - 131 is for its importance using in (SPET) for imaging of the thyroid gland and as a therapy by thyroid cancer. The analysis of a complete energy range has been done for each interaction. The cross sections are reproduced in fine steps of incident proton or deuteron or alpha particle energy in 0.01MeV intervals with their corresponding error. Therefore, the selected cross section for the production of radioactive Iodine isotopes have been calculated with a polynomials fitting with a degree n=4→10 that could be used for the prediction of un calculated cross sections. Level of impurities that appear in the isotope production processes that which have the highest medical applications have been calculated. The best area of useful energy range has been chosen by using cyclotron to reduce the appearance of nuclear impurities The stopping power according to Zeigler formulae was used in order to obtain the yield for each reaction and to calculate the target thicknes. Q - value, threshold energy and binding energy for selected Iodine isotopes were also calculated. The programmes of Recom.m, Stopp.m, Stopd.m, Stopa.m, Yield.m and Impurity.m, have been built in the present work using Matlab - 8 to calculate the results of the present work, as well as SRIM (2003) program were used

تحضير المعقد السيراميكي (Ln2Ba2Zn3 - xMxTiOy) ودراسة بعض خواصه الفيزيائية (Ln=La,Nb) (X=0,1,2,3) (M=Ca,Mg) == Preparation of complex ceramic(Ln2Ba2Zn3 - xMxTi3Oy) and study of dielectric properties (Ln=La,Nb) (X=0,1,2,3) (M=Ca,Mg) (y=14,16)

Author name: رعد سعدون صبري
Supervisor name: خالد طه رسول | كاظم حسن الموسوي
General topic: Physics
Degree: Doctorate
Language: Arabic
University location: Baghdad
Key words:
  • المعقد السيراميكي (Ln2Ba2Zn3 - xMxTi3Oy) وخواصه العزلية
First pages:
Abstract: تم في هذا البحث تحضير المركبات السيراميكية Ln2Ba2Zn3 - xMxTi3Oy حيث (Ln=La,Nb) و(X=0,1,2,3) و(M=Ca,Mg) بطريقة التفاعل الصلب باستخدام المواد الاولية (La2O3,Nb2O5, BaCO3,ZnO,CaCO3,MgO,TiO2). تم وزن المواد وخلطها باضافة الكحول وتجفيفها بعدها تم حرقها حرقة اولية بدرجة حرارة (950oC) لمدة (18h) بعد ذلك تم طحنها وخلطها مرة ثانية واعادة حرقها بدرجة حرارة (1000oC) لمدة (12h) بعد ذلك تم طحنها وكبسها باضافة (PVA) كمادة رابطة على شكل اقراص ذات قطر (1cm) حيث تم تلبيد هذه الاقراص بخمس درجات حرارة تلبيد (1050,1100,1150,1200,1250)oC ولكل درجة حرارة تم التلبيد بخمس ازمان (2,4,6,8,10)hعدا درجة حرارة تلبيد (1250oC) حيث تم التلبيد بثلاث ازمان (2,4,6)h. بعد انتهاء عملية التلبيد تم اجراء فحص حيود الاشعة السينية للمركب (La2Ba2Zn2Ca1Ti3O14) والمحضر بدرجتي حرارة تلبيد وكذلك لمركبات (La2Ba2Zn3 - xCxTi3O14)لقيم (X=0,1,2,3).وتم قياس الكثافة الظاهرية والمسامية الظاهرية لكافة النماذج المحضرة باستخدام طريقة ارخميدس ثم تم دراسة التركيب المجهري لها باستعمال المجهر الضوئي بعد اجراء عملية الصقل لسطوح هذه المواد. وكذلك تم دراسة الخواص الكهربائية لهذه المركبات والمتضمنة كل من قياس ثابت العزل الكهربائي ومعامل الفقد العزلي وظل زاوية الفقدان والتوصيلية الكهربائية المتناوبة ومخططات كول - كول وكذلك المقاومية الكهربائية والتوصيلية الكهربائية المستمرة وقياس متانة العزل. واظهرت نتائج حيود الاشعة السينية ان هذه المركبات لها تركيب من نوع بيروفسكايت المكعب وان مركبات( La2Ba2Zn3 - xCaxTi3O14) تحوي ايضا الطور (Ba2Ti9O20) عدا المركب( ( La2Ba2Zn2CaTi3O14 فله طور واحد هو المكعبي. ومن خلال الصور المجهرية الماخوذة لسطوح النماذج تبين ان الحبيبات تبدا بالتقارب من بعضها البعض على حساب المناطق غير المتفاعلة والفجوات وان المقاس الحبيبي يزداد مع زيادة درجة حرارة وزمن التلبيد .بينت النتائج ان الكثافة الظاهرية وثابت العزل والمقاومية الكهربائية ومتانة العزل تزداد مع زيادة كل من درجة حرارة وزمن التلبيد لكافة المركبات وان جميعالنماذج قد انصهرت بشكل تام عند درجة حرارة تلبيد (1250oC) عدا(La2Ba2Zn2CaTi3O14 ) و( Nb2Ba2ZnCa2Ti3O16 ) و( Nb2Ba2Zn3Ti3O16 ) التي انصهرت بدرجة حرارة تلبيد (1300oC). وان كل من المسامية الظاهرية ومعامل الفقد العزلي وظل زاوية الفقدان والتوصيلية الكهربائية المتناوبة والمستمرة وزمن الاسترخاء انخفضت قيمها مع زيادة درجة حرارة وزمن التلبيد. وبشكل عام فان اعلى قيمة لثابت العزل والمقاومية واقل قيمة لظل زاوية الفقدان والفقد العزلي والتوصيلية الكهربائية المتناوبة والمستمرة وزمن الاسترخاء (τ1) واعلى قيمة لمتانة العزل لمركبات( La2Ba2Zn3 - xCaxTi3O14 )تكون عند (X=1) وكذلك فان هذه النسبة لهما اعلى استقرارية لثابت العزل مع الحرارة ,بينما لمركبات(Nb2Ba2Zn3 - xCaxTi3O14)نجد ان اعلى قيمة لثابت العزل والمقاومية الكهربائية واقل قيمة لظل زاوية الفقدان والفقد العزلي والتوصيلية الكهربائية المتناوبة والمستمرة وزمن الاسترخاء واعلى قيمة لانهيار العزل تكون عند (X=2). واقل توصيلية كهربائية مستمرة واعلى قيمة لانهيار العزل تكون عند (X=0) واقل قيمة لظل زاوية الفقدان بشكل عام تكون عند(X=3) واقل قيمة للتوصيلية الكهربائية المتناوبة ومعامل الفقد وزمن الاسترخاء تكون عند (X=1). ولمركبات( Nb2Ba2Zn3 - xMgxTi3O16 )نجد ان اعلى قيمة لثابت العزل تكون عند (X=0) واعلى قيمة للمقاومية واقل قيمة للتوصيلية المستمرة واعلى قيمة لانهيار العزل تكون عند (X=1), واقل قيمة لظل زاوية الفقدان ومعامل الفقد العزلي والتوصيلية الكهربائية المتناوبة وزمن الاسترخاء تكون عند (X=3). وكذلك بينت نتائج القياسات الكهربائية ان كل من ثابت العزل الكهربائي وظل زاوية الفقدان ومعامل الفقد العزلي تقل مع زيادة التردد وتبدا بالاستقرار بعد تردد (~10KHz) وان التوصيلية الكهربائية المتناوبة تزداد مع زيادة التردد. ومن خلال نتائج قياس تاثير درجة الحرارة ضمن المدى (30 - 200oC) على الخواص الكهربائية المقاسة عند تردد (100KHz) تبين ان ثابت العزل يكون شبة مستقر مع زيادة درجة الحرارة وان ظل زاوية الفقدان ومعامل الفقد العزلي والتوصيلية المتناوبة تزداد مع زيادة درجة الحرارة للنماذج المقاسة. وبينت نتائج مخططات كول - كول ان جميع العينات المقاسة لا تخضع لنموذج ديباي للاسترخاء العزلي , وان هناك توزيع لزمن الاسترخاء من خلال وجود منطقتي استرخاء الاولى عند الترددات العالية والثانية عند الترددات الواطئة, وان الاستقطابية بشكل عام للمنطقة الاولى تكون اكبر من المنطقة الثانية, وان زمن الاسترخاء للمنطقة الاولى يكون اقل من المنطقة الثانية. | In present search it has been preparing a ceramic compounds Ln2Ba2Zn3 - xMxTi3Oy where (Ln=La,Nb) , (X=0,1,2,3) and ( M=Ca,Mg) were prepared by using solid state reaction method by using start materials (La2O3, Nb2O5, BaCO3,ZnO,MgO,TiO2), after the end of weight and wet mixing and drying process the mixtures were calsinted at ( 9500C) for (18h) after that the mixtures were crashing and mixing again then calsinted again at (1000 0C) for (1 cm) diameter with addition of (PVA) as a binder , then, these pellets were sintered at fire sintering temperatures (1050,1100,1150,1200,1250) 0C for fire sintering time (2,4,6,8,10) h except sintering temperature (1250 0C)were sintered at three sintering time (2,4,6)h. After the sintering process end, that it has been affirmating of the kind and accuracy of crystal structure for the compound La2 Ba2 Zn2 Ti3 O14, which has been sintered at tow temperatures, and the compounds Ln2 Ba2 Zn3 - x Cax Ti3 O14, where ( x = 0,1,2,3), by using the X - ray diffraction technique. It has been measuring the apparent density and apparent porosity for all prepared samples by using archamids method. After the eaching process, the microstructure of samples was studied by using photomicroscope. It has been studying the electrical properties for these compounds, that the electrical properties contained the measurement of each of dielectric constant, dielectric loss coefficient, tangent loss, alternating electrical conductivity cole - cole diagrams and also each of electrical resistivity and direct electrical conductivity and dielectric strength. The results of X - ray diffraction showed that compounds has a cubic peroveskait structure and the compounds La2 Ba2 Zn2 Ti3 O14 including Ba2Ti9O20 phase, except La2 Ba2 Zn2Ca Ti3 O14 has pure cubic phase, through microscopic images captured from samples surfaces it showed that grains start in convergence with each other up on the interest of unreactive areas and gaps,and grains size increasing with temperature and time of the sintering. The results have been showed that the value of each of apparent density, dielectric constant, dielectric resistivity and dielectric strength were increased with temperature and time of sintering increase, for the whole compounds and all the samples were compeletly melted at sintering temperature (1250 0C) except La2 Ba2 Zn2 CaTi3 O14, Nb2 Ba2 ZnCa2 Ti3 O16 and Nb2Ba2 Zn3 Ti3 O16, were melted at sintering temperature of (1300 0C). also results showed that the apparent porosity, dielectric loss coefficient, tangent loss, alternating and direct electrical conductivity and relaxation time were decreased their valus with the increase of the temperature and time of sintering. Generally, the heights value of dielectric constant, resistivity and the lowest value of tangent loss, dielectric loss coefficient alternating ,direct electrical conductivity and relaxation time (t1) and highest value of dielectric strength for compounds La2Ba2Zn3 - xCaxTi3O14 being at (x =1) and also this ratio have highest stability for dielectric constant with temperature ( ) while for compounds Nb2 Ba2 Zn3 - xCax Ti3 O14 we found that maximum value of dielectric constant, resistivity and lowest value of tangent loss, loss coefficient, alternating and direct conductivity and relaxation time and maximum value of dielectric strength being at (x=2). For the compounds La2Ba2Zn3 - xMgxTi3O14 we found that the maximum value of dielectric constant ( at higher sintering temperature ) (T >1150 0C) being at (x=3) and the highest value of resistivity and lowest value of alternating and direct conductivity and higher value of dielectric strength being at (x=0) , Generally lowest value for tangent loss being at (x=3), and the lowest value of alternating conductivity, loss coefficient and relaxation time at (x=1). For compounds Nb2Ba2Zn3 - xMgxTi3O16,we found that highest value of dielectric constant being at (x=0) and highest value for resistivity and lowest value of direct conductivity and highest value of dielectric strength being at (x=1) , and lowest value of tangent loss , loss coefficient , alternating conductivity and relaxation time at (x=3). Also, results of electrical measurements showed that each of dielectric constant, tangent loss , loss coefficient were decreasing with frequency increasing and start to stable after frequency ( 10 kHz), and the alternating conductivity increases with the frequency increases.Through the results of temperature effect measurement within the range (30 - 200 0C) up on the electrical properties at frequency (100 kHz) , the results showed that the dielectric constant being semi - stable with temperature increasing and the tangent loss, loss coefficient and alternating conductivity increases with temperature increase for the measured samples.cole - cole diagrams results showed that all measured samples didn’t submit to Debye model of relaxation and there is a distribution for the relaxation time through the presence of two areas ;first relaxation at high frequencies and the second at low frequencies and polarization coefficient in general at the first area being higher than second area and relaxation time at first area being lower than second area .

الخصائص الفيزيائية لاغشية اوكسيد الخارصين المشوبة تشويبا مشتركا بالبورون والالمنيوم == Physical Properties of Aluminum and Boron co - doped Zinc Oxide Thin Films

Author name: رشيد هاشم جبار
Supervisor name: انوار حسين علي الفؤادي
General topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: في هذا البحث تم تحضير اغشية اوكسيد الخارصين النقي ZnO والمشوبة تشويبا مشتركا بالبورون والالمنيوم ( AZB) بنسب تشويب (2, 4, 6, 8 %)، اي [ZnO : (B 1%+Al 1%), ZnO : (B 2%+ Al 2%), ZnO : (B 3%,Al 3%), ZnO : (B 4%,Al4%)]. اذ تم تحضير الاغشية بطريقة التحلل الكيميائي الحراري بدرجة حرارة القاعدة مقدارها(450 ±10 oC) وسمك (150±5 nm) على قواعد زجاجية وسليكون مسامي من النوعين (n, p) بمقاومية مقدارها(0.05 - 0.1 Ω.cm) واتجاه بلوري (111). تم تصنيع مفارق هجينة من انواع : ( ((ZnO, AZB)/p - PS/Si, (ZnO, AZB)/n - PS/Si ، وتم تحضير طبقة السليكون المسامي بطريقة التنميش الكهروكيميائية والكهروكيميائي تحت تاثير ضوء الهالوجين على قواعد السليكون للنوعين (n, p) بكثافة تيار مقدارها (30 mA) وزمن مقداره (30 minutes) . تم دراسة طبوغرافية سطح الاغشية وللسليكون المسامي باستعمال المجهر الالكتروني الماسح (SEM)، مجهر نفاذية الالكترونات (TEM) ومجهر القوة الذري (AFM) فتبين ان التركيب السطحي للاغشية المرسبة هو تركيب نانوي يتناقص فيه الحجم الحبيبي مع زيادة نسب التشويب المشترك اذ بلغت قيمة اصغر حجم حبيبي 7.5 nm))، وان خشونة السطح تزداد مع زيادة التشويب المشترك وتتغير من(1.34 - 6.15 nm) ومن (6.4 - 12.12)للاغشية المرسبة على الزجاج والسليكون المسامي على التوالي، واظهر جهاز حيود الاشعة السينية (XRD ) ان اغشيية ZnO المحضرة النقية والمشوبة ذات تركيب متعدد التبلور ومن النوع السداسي المتراص (hexagonal wurtzite). تم دراسة الخصائص البصرية للاغشية المحضرة بوساطة قياس طيف النفاذية والامتصاصية عند درجة حرارة الغرفة لمدى طول موجي يتراوح من (300 - 1100 nm) تبين ان النفاذية البصرية للاغشية النقية (87 %) وانها تتناقص مع زيادة نسب التشويب، وظهر ان فجوة الطاقة البصرية تزداد بزيادة نسب التشويب حيث بلغت قيمة فجوة الطاقة البصرية للغشاء النقي (3.22 eV) وتصل الى (3.31 eV) عند التشويب بنسبة (8%). اظهرت القياسات الكهربائية ان الاغشية النقية والمشوبة من النوع السالب (n - type)، وتركيز حاملات الشحنة يزداد مع زيادة نسب التشويب المشترك. لاغشية المحضرة المرسبة على الزجاج والسليكون المسامي للنوعين (n, p) تم استخدامها في قياس التحسسية للغازين (NH3, NO2)، بدرجة حرارة الغرفة وبتراكيز (50, 100, 150, 200 ppm). اظهرت النتائج ان المقاومة الكهربائية للاغشية تتناقص مع زيادة التشويب بالنسبة للغاز (NH3) بسبب تفاعل الاختزال، لكنها تزداد مع زيادة التشويب بالنسبة للغاز (NO2) بسبب تفاعل الاكسدة. بينت النتائج ان تحسسية الاغشية المرسبة على السليكون المسامي تكون اكبر من تحسسية الاغشية المرسبة على الزجاج، وتكون تحسسية الاغشية المرسبة على السليكون المسامي نوع (n) اكبر منها في حالة السليكون المسامي لنوع (p). وبينت الدراسة ان زيادة تراكيز الغازات تؤدي الى زيادة التحسسية. | In this research, pure ZnO and (aluminum and boron) co - doped ZnO(AZB)thin films were deposited with various doping concentration(2, 4, 6 and 8 %),[ZnO : (B 1%+Al 1%), ZnO : (B 2%+ Al 2%), ZnO : (B 3%,Al 3%), ZnO : (B 4%,Al4%)]. The thin films have been prepared by Spray Pyrolysis's method at (450 ±10 oC) substrate temperature with (150±5 nm) thickness on glass and porous silicon (n & p) types with resistivity (ρ= 0.05 - 0.1 Ω.cm) and (111) crystalline orientation. Heterojunctions of the types, such as : (( ZnO, AZB)/p - PS/Si, (ZnO, AZB)/n - PS/Si were also prepared. The porous silicon layer was prepared by the electrochemical and photo electrochemical etching under the effect of halogen light on silicon substrates for (n & p) types with current density (30 mA) for (30 minutes). The surface topography of the films and the porous silicon are studied by using the Scanning Electron Microscopy (SEM), Transmission electron microscopy (TEM) and the Atomic Force Microscopy (AFM). The study shows that the surface structure of the deposited films is nano structural and the value of the grain size decreases with the increase of co - doping where the minimum value of grain size was (7.6 nm). It was found that the surface roughness increased with doping from (1.34 to 6.15 nm) and (6.4 to 12.12) for a films deposited on glass and porous silicon substrate respectively, the x - rays diffraction showed the prepared doped and undoped ZnO thin films were of polycrystalline structural of(hexagonal wurtzite). The optical properties of the prepared thin films have been studied by measured the transmittance and absorbance spectrum at room temperature for the wavelength range (300 - 1100 nm), the transmittance was (87 %) for the undoped ZnO, the transmittance decreased with the co - doped increased. The value of the optical energy gap increased with the co - doped increase, the optical energy gap of the undoped film was found to be (3.22 eV) and increased to (3.31 eV) after doping with (8%) rate. The electrical measurements proves that doped and undoped thin films were n - type, and the carrier charge concentrations increased with the increase of co - doped rate. The prepared thin films deposited on glass and porous silicon (n & p) types have been used to the sensitivity measurements for (NH3, NO2) gasses at room temperature for the (50, 100, 150, 200 ppm) concentrations. The results shows that the electrical resistance for the thin films decrease with the increase of co - doped concentrations for (NH3) gas due to the reducing interaction, but it increases with the increase of co - doped concentration for (NO2) gas due to the oxidation interaction. The results show that the sensitivity of the thin films deposited on porous silicon substrates is higher than the sensitivity of the thin films deposited on glass substrates. The sensitivity of n - type porous silicon is higher than p - type porous silicon and glass substrate. The study shows that the increase of gases concentrations leads to increase of sensitivity.

دراسة الخواص البصرية والكهربائية لمتراكبات PMMA/ اكسيد المعادن == Study the Optical and Electrical Properties of PMMA/Metal Oxide Composites

Author name: رسل طه حسين
Supervisor name: رغد صبحي الخفاجي
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: يهدف هذا البحث الى تحضير متراكبات ثلاثية هجينة من PMMA مقواة بجسيمات TiO2 - Al2O3 وZrO2 بتقنية الصب .تم استخدام كسور وزنية (84 - 92) wt % من بولي ميثيل ميثا اكريلك ونسبة ثابتة % (4) من تيتانيا مع نسب وزنية تتراوح بين wt % (4 - 12) للالومينا والزركونيوم. تم دراسة المواصفات التركيبية من خلال حيود الاشعة السينية ومجهر القوة الذرية. بينت فحوصات صور مجهر القوة الذرية تجانس في البناء البلوري. اما الخواص العزلية فقد فحصت من خلال قياس ثابت العزل عند مدى تردد (102 - 106) Hz وبينت النتائج ظهور تاثير طفيف عند اضافة الالومينا للمتراكب الهجيني (PMMA - TiO2 - Al2O3) مقارنة بمضاف الزركونيوم للمتراكب الهجيني (PMMA - TiO2 - ZrO2) حيث قيم ثابت العزل تزداد مع زيادة التركيز (3.408500 - 10.69851). في حين يتناقص عامل الفقد بزيادة التردد للمتراكبات (PMMA - TiO2 - Al2O3)و(PMMA - TiO2 - ZrO2) . قيست التوصيلية الكهربائية المستمرة لمدى درجات حرارية تتراوح بين ( 313 - 373 )K ولوحظت زيادة في القيم التوصيلية بزيادة التركيز ودرجة الحرارة (5.5E - 10 - 8.52E - 10) (Ω.m) - 1 في حالة الزركونيوم المضاف للمتراكب الهجيني. تم حساب الثوابت البصرية للعينات المحضرة كدالة للطول الموجي وذلك باستخدام مطياف بمدى nm( - 1100200). حيث تم حساب معامل الامتصاص، معامل الخمود، معامل الانكسار وفجوة الطاقة البصرية, ومن حساب النتائج نلاحظ ان قيم معامل الامتصاص ومعامل الخمود ومعامل الانكسار لل(PMMA - TiO2 - Al2O3) اعلى من (PMMA - TiO2 - ZrO2) كدالة للطول الموجي، نلاحظ ايضا، انخفاض في قيم فجوة الطاقة البصرية المسموحة eV (2.90 - 2.50) في متراكبات الالومينا بينما من (2.90 - 2.58) eV للزركونيوم. وكذالك فجوة الطاقة البصرية الممنوعة (2.85 - 2.48) eV الكترون فولت للالومينا بينما eV (2.85 - 2.52) للزركونوم . | This study aims to synthesize ternary hybrid composites PMMA polymer matrix with TiO2, Al2O3 and ZrO2 as additives using casting technique. the weight fractions of matrix with range (84 - 92) wt %, fixed percentage (4) % of TiO2 and range of weight fractions with range (4 - 12) wt % of Al2O3 and ZrO2 were used as started materials. Characterization properties were examined through XRD and AFM. Obtained micrograph and XRD revealed homogeneity structure for Al2O3 filler. Dielectric properties such as dielectric constant were carried for range (102 - 106) Hz frequency .The addition of Alumina filler exibits slightly effect on dielectric constant values for prepared ternary hybrid composite (PMMA - TiO2 - Al2O3 ) compared with ZrO2 for ternary hybrid composite (PMMA - TiO2 - ZrO2) where dielectric constant increases as concentration increases (3.408500 - 10.69851) . Dissipation factor decreases with increasing frequency in composite (PMMA - TiO2 - Al2O3) and (PMMA - TiO2 - ZrO2). DC electrical conductivity was conducted in temperature range ( 313 - 373 )K. Markedly increasing for the DC electrical conductivity of Zirconia filler with respect to additional concentration (5.5E - 10 - 8.52E - 10) (Ω.m) - 1 .Otherwise DC electrical conductivity increases versus applied temperature for both prepared composites. Optical constants (extinction coefficient, absorption coefficient, and Index of refraction), optical energy gap were obtained for prepared Specimens as function of wavelength using spectrometer at range (200 - 1100)nm. It was noticed that the values of extinction coefficient ,coefficient of absorption , and refractive index for (PMMA - TiO2 - Al2O3) are higher from that of (PMMA - TiO2 - ZrO2) as wavelength, also, more decreasing in allowed optical energy gap values from (2.90 - 2.50 eV) for Al2O3 filler and from (2.90 - 2.58 eV) for ZrO2 as additive. Also forbidden optical energy gap decreases in case Al2O3 from(2.85 - 2.48) eV while from (2.85 - 2.52) for ZrO2 as additive.

دراسة التركيب المتهيج للنوى زوجية - زوجية ذات العدد الذري Z= 50, 48, 46 في المستوى المتهيج الاول == Study of Excited Structure for Even - Even Nuclides of Z = 50, 48, 46 in The First Excited State

Author name: رسل سعد هادي
Supervisor name: فاطمة عبد الامير جاسم
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: درست الخواص الكهرومغناطيسية للنظائر زوجية - زوجية للنوى 48Cd , 50Sn و46Pd الغنية بالنيوترونات من خلال قوى الانتقال لرباعي القطب الكهربائي |M(E2)|2 W.u ↓ واحتمالية الانتقال المختزل B(E2)W.u ↓ لانتقال اشعة كاما من المستوى المتهيج الاول الى المستوى الارضي. حيث تم حساب قوى الانتقال لرباعي القطب الكهربائي |M(E2)|2 W.u ↓ بالاستعانة بمعدل العمر للمستوى المتهيج الاول والشدة النسبية لاشعة كاما المنبعثة من ذلك المستوى, بينما قيم احتمالية الانتقال المختزل B(E2)W.u ↓ استخرجت من خلال عمر النصف للمستوى المتهيج الاول المصحح لمعامل التحول الداخلي.وللحصول على قيمة دقيقة لانتقال رباعي القطب الكهربائي ↓ E2, تم حساب ورسم القيم المتبناة لكل من |M(E2)|2 W.u ↓ وB(E2)W.u ↓ كدالة لعدد النيوترونات.في هذا البحث, تم تحويل القيم المتبناة لانتقال ↓E2 الى قيم احتمالية الانتقال المختزل B(E2) ↑ e2b2 والتي افادتنا في دراسة تركيب النوى من حيث الاختلاف في الشكل لان عامل التشوه β تم استخراجه من B(E2) ↑ e2b2, كما ان دراسة تاثير عدد النيوترونات على سلوك كل من B(E2) ↑ e2b2 وβ في المتسلسلات الايزوتونية لنوى 48Cd , 50Sn و46Pd يعطي معلومات جيدة حول التشوه في النوى.تركزت دراستنا على ثلاث انواع مختلفة من النوى, الاول بعدد ذري سحري50 , والثاني بعدد ذري شبه سحري 48, والثالث بعدد ذري بين القشرات المغلقة 46.في نهاية العمل الحالي تم عمل مقارنة جيدة للحسابات الحالية لقيم احتمالية الانتقال المختزل B(E2) ↑ e2b2 وعامل التشوه β مع معظم القيم العملية والنظرية الحديثة. | Electromagnetic properties for even - even nuclides in neutron - rich nuclei such 50Sn, 48Cd and 46Pd have been studied through the electric quadruple transition strength |M(E2)|2 W.u ↓ and the reduced transition probability B(E2)W.u ↓for γ0 - transition from first excited state to the ground state. The electric quadruple transition strength |M(E2)|2 W.u ↓ is calculated by using life - time for excited state with the intensity of γ0 - transition, while B(E2)W.u ↓ is extracted from half - life time to state corrected for internal conversion coefficient. To obtain precise value for the transition of E2↓, the adopted value for |M(E2)|2 W.u ↓ and B(E2)W.u ↓ was calculated and plotted as a function for neutron number. In present work, the adopted values for the transition of E2↓ are converted to B(E2)exp ↑ e2b2 which helped us to study the structure for nucleus, such as the variation in shape, because the deformation parameter β is extracted from B(E2) ↑ e2b2 and the study for behavior of each of B(E2) ↑ e2b2 and β versus neutron number in isotonic chains to 50Sn, 48Cd and 46Pd gives good information about the deformation in nuclei. Our study focused on the three different types of nuclei, the first with atomic magic number 50, the second with semi - magic atomic number 48 and the third nucleus with atomic number between closed shells 46. At the end of the present work, the good comparisons for the present calculation to the values of the B(E2) ↑ e2b2 and β with most recent values of experimental and theoretical was done.

تصميم مراة ايونية تعمل كمصحح للزيوغ باستخدام طريقة القيم الحدودية == DESIGN OF ION MIRROR AS AN ABERRATION CORRECTOR USING BOUNDARY VALUES METHOD

Author name: محمد سلام مزاحم العبيدي
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
1 ... 68 69 70 71 72 ... 131