Show: 25 50 75 100 Results

Search results: 25 out of 385

خصائص الصلادة والبنية المجهرية للحام القوس ARC ولحام القوس باستخدام الغاز الخامل MIG == Characterization of Hardness &Microsturce for Arc and MIG Welding

Author name: سمية جبار مطر
Supervisor name: جاسم محمد سلمان المرشدي
General topic: Production engineering metallurgy and materials
Specific topic: Metals Engineering
Degree: Higher Diploma
University: University of Babylon - Faculty Of Materials Engineering - Department Of Metallurgical Engineering
Language: Arabic
University location: Babylon
First pages:

دراسة التاكل الحار والاكسدة في وصلة لحام انابيب المرجل البخاري بمحطات توليد القدرة الكهربائية == Study the Hot Corrosion & Oxidation of the Weld Joint for Boiler Tube in Power Generation Station

Author name: حيدر جليل كريم
Supervisor name: كاظم فنطيل السلطاني
General topic: Production engineering metallurgy and materials
Specific topic: Metals Engineering
Degree: Higher Diploma
University: University of Babylon - Faculty Of Materials Engineering - Department Of Metallurgical Engineering
Language: English
University location: Babylon
First pages:

لحام النقطة لفولاذ واطئ الكاربون الى الفولاذ المقاوم للصدا 202

Author name: حسن هادي مسلب
Supervisor name: عبد الواحد كاظم راجح
General topic: Production engineering metallurgy and materials
Specific topic: Metals Engineering
Degree: Higher Diploma
University: University of Babylon - Faculty Of Materials Engineering - Department Of Metallurgical Engineering
Language: English
University location: Babylon
First pages:

اللحام النقطي بالاحتكاك و الخلط لسبيكة الالمنيوم 3105 == Friction Stir spot Welding of Aluminum Alloy 3105

Author name: فالح حسين صدام
Supervisor name: احمد عودة جاسم
General topic: Production engineering metallurgy and materials
Specific topic: Metals Engineering
Degree: Higher Diploma
University: University of Babylon - Faculty Of Materials Engineering - Department Of Metallurgical Engineering
Language: English
University location: Babylon
First pages:

تحضير سطوح مطاطية للملاعب الرياضية من تدوير مخلفات الاطارات المستهلكة == Preparation of Rubber Surfaces for Sports Stadiums from Recycled Tires Waste

Author name: مرتضى كتيب دخن الزريجاوي
Supervisor name: محمد حمزة المعموري
General topic: Production engineering metallurgy and materials
Specific topic: Polymer
Degree: Master
University: University of Babylon - Faculty Of Materials Engineering - Department Of Non-Metallic Materials Engineering
Language: Arabic
University location: Babylon
First pages:

تاثير اللحام بالتنكستن TIG وبالقوس الكهربائي (SMAW) على البنيه المجهرية والخواص الميكانيكية للفولاذ واطئ الكربون == Effect of TIG and SMAW welding parameters on the microstructure and mechanical properties of low carbon steel

Author name: علي جاسم عطية لفته
Supervisor name: اقبال محمد سعيد صالح
General topic: Production engineering metallurgy and materials
Specific topic: Metals Engineering
Degree: Higher Diploma
University: University of Babylon - Faculty Of Materials Engineering - Department Of Metallurgical Engineering
Language: Arabic
University location: Babylon
First pages:

التحقق من الخواص الميكانيكية لوصلة لحام لانبوب المراجل البخارية في محطات توليد الطاقة == Investigation of the Mechanical properties of the tube boiler weld joint in the Power plants

Author name: محمد عبد الرضا كاظم الزبيدي
Supervisor name: كاظم فنطيل السلطاني
General topic: Production engineering metallurgy and materials
Specific topic: Metals Engineering
Degree: Higher Diploma
University: University of Babylon - Faculty Of Materials Engineering - Department Of Metallurgical Engineering
Language: Arabic
University location: Babylon
First pages:

تاثير اضافة عنصر الفضة على بعض الخواص الميكانيكية لسبائك البراص == Effect of Silver Addition on Some Mechanical Properties of Brass Alloys

Author name: ايمان سليمان عبيد
Supervisor name: علي هوبي حليم
General topic: Production engineering metallurgy and materials
Specific topic: Metals Engineering
Degree: Higher Diploma
University: University of Babylon - Faculty Of Materials Engineering - Department Of Metallurgical Engineering
Language: English
University location: Babylon
First pages:

دور السباكة تحت تاثير الاهتزاز والتعتيق اللاحق على الخواص الميكانيكية لسبيكة Al - 4%Cu == The Role of casting under vibration and Subsequent Aging on Mechanical Properties of Al - 4%Cu

Author name: رانية حسين ياسين الخفاجي
Supervisor name: حيدر العذاري
General topic: Production engineering metallurgy and materials
Specific topic: Metals Engineering
Degree: Higher Diploma
University: University of Babylon - Faculty Of Materials Engineering - Department Of Metallurgical Engineering
Language: English
University location: Babylon
First pages:

دراسة بعض الخواص الميكانيكية لسبيكة المنيوم % 4 نحاس معصورة == Study of Some Mechanical Properties of Squeezed Aluminum 4% Copper

Author name: حنين محمد هادي
Supervisor name: حيدر عبد الحسن العذاري
General topic: Production engineering metallurgy and materials
Specific topic: Metals Engineering
Degree: Master
University: University of Babylon - Faculty Of Materials Engineering - Department Of Metallurgical Engineering
Language: English
University location: Babylon
First pages:

تحضير مواد مطاطية مركبة كوسائد تحميل للجسور ودراسة بعض خواصها الفيزيائية والميكانيكية == PREPARATION OF RUBBER COMPOSITE AS BEARING PAD AND STUDY SOME OF THE PHYSICALS AND MECHANICAL PROPERTIES FOR BRIDGES PAD APPLICATIONS

Author name: عمار عماد كاظم الكواز
Supervisor name: محمد حمزة المعموري |فلاح كيفي مطلوب
General topic: Production engineering metallurgy and materials
Specific topic: Plastics
Degree: Master
University: University of Babylon - Faculty Of Materials Engineering
Language: Arabic
University location: Babylon
First pages:

استقصاء قلف شجرة الكالبتوس كمانع تاكل للفولاذ الكربوني X52 في الاوساط المختلفة للانابيب الناقلة للنفط الخام == Investigation The Bark Of Eucalyptus Tree As Corrosion Inhibitor For Carbon Steel X52 In Different Media Of Crude Oil Pipelines

Author name: زينب فؤاد حمزة الشريفي
Supervisor name: كاظم فنطيل السلطاني
General topic: Production engineering metallurgy and materials
Specific topic: Metals Engineering
Degree: Master
University: University of Babylon - Faculty Of Materials Engineering - Department Of Metallurgical Engineering
Language: English
University location: Babylon
First pages:
Abstract: In the oil and gas industry, the crude oil pipelines which made of low carbon steel suffer from internal corrosion. The corrosion operation is originally related with the presence of the wastewater mixed with the crude oil, especially when it is accompanied by hydrogen sulfide, carbon dioxide, elemental sulfur, inorganic salts, organic acids, and bacteria. Corrosion inhibitors injection in the oilfield is a most common and beneficial method for prevention the pipelines internal corrosion. Because of a high cost and toxic nature of the chemical corrosion inhibitors which used presently in oil industry, it is necessary to promote a less expensive and environmentally acceptable inhibitors, natural plants can be treated as a perfect sources for this purpose.This study investigate the internal corrosion of low carbon steel pipelines in fluid environments, as well as prepare and use natural and locally available plant ( the bark of eucalyptus tree) as a natural corrosion inhibitor, and compared the new inhibitor with a chemical inhibitor used by Missan Oil Company (MOC) in terms of the cost, toxicity, availability and performance.Some experiments were achieved to estimate the performance of a new inhibitor, one of these tests include corrosion measurement by simple immersion in crude oil within and without of inhibitors which added in different amounts 30, 40, 50, and 60 ppm , where the best inhibition efficiencies which get when added the inhibitors in a critical amounts or closest to it, since for the aqueous extract (EB - A) the inhibition efficiency reached (94.4) and (86.71)% at 300 and 323K respectively, and for diethyl ether extract (EB - D) reached (82.87) and (84.6)% at 300 and 323K respectively, while the chemical inhibitor (CRW) which used by MOC reach to (84.21) and (88.73)% at 300 and 323K respectively.optical microscopy examination have been conducted to evaluate the corrosion nature where it show a clear difference in the topography of the immersed samples surface after add the inhibitors at two temperatures.Another tests was achieved to evaluate the corrosion behavior such as potentiostatic polarization and open circuit potential tests in wastewater, since the inhibitor efficiency at 313k reached (88.21)% when add a 60ppm from the EB - A inhibitor to the wastewater in Tafel extrapolation, while it reached (74.91)% when add a 30ppm from the EB - D inhibitor.Several tests was achieved such as FT - IR spectra and using a chemical reagents to detection the presence of many active groups and the presence of tannins, phenols and alkaloids in the Eucalyptus Bark (EB).The results show , that the new corrosion inhibitor is not only equivalent to a chemical inhibitor, but have greatly improvement properties such as : high efficiency , low cost , non - toxic , easily to product, and nonpolluting as compared with chemical inhibitor which is considered toxic and cancering inhibitor.

استقصاء الخواص الفيزيائية والميكانيكية لنحاس الومينا متدرج وظيفيا == Investigation Of Physical And Mechanical Properties Of Cu/Al2O3 Functionally Graded Materials

Author name: رؤى حاتم كاظم
Supervisor name: عبد الرحمن كاظم عبد علي
General topic: Production engineering metallurgy and materials
Specific topic: Metals Engineering
Degree: Master
University: University of Babylon - Faculty Of Materials Engineering - Department Of Metallurgical Engineering
Language: English
University location: Babylon
First pages:
Abstract: One of the most important smart material is the functionally graded materials, which had more increasing attention in different engineering applications.In this study, five - layered stepwise Cu/Al2O3 as functionally graded materials have been prepared from copper powder with five percentage of alumina powder as (5, 10, 20, 30, and 40 Wt%) by using powder metallurgy technique. Mixing of copper (34.32 ?m) and alumina (1.439 ?m) powders for two hours and then several disk sample with dimensions (14mm diameter and 10mm thickness) and cylindrical specimens with (18mm diameter and 27 height) have been compacting at different compacting stresses (550, 650 and 750 MPa). However, sintering of specimens for three hours at 850?C under vacuum about has been achieved.Several physical tests such as porosity, electrical resistance and thermal conductivity, X - ray diffraction, X - ray Fluorescence and Particale size analysis have been achieved. Furthermore, Microstructure and mechanical tests such as hardness, compression, double shear and dry sliding wear have been done for preparing samples from composite and functionally graded material.Numerical modeling using finite element analysis by ANSYS software has been presented for copper/alumina joints and compare with copper/alumina functionally graded materials.From the several experimental results, it is clear that the best compacting pressure was 650 MPa is determined by measuring green density at different compacting pressure, hardness increased with the increasing additive percentage of alumina, hardness resultschange in each layer by producing functionally graded materials (FGM) according to the percentage of the harder constituent (i.e. Al2O3) from 53 to 113 HV at compacting pressure 650 MPa, While the shear strength decreases with alumina increased from 72 MPa for layer one to 28 MPa for layer five at compacting pressure 650 MPa. The Wear rate increases as the time and load is increased. The wear resistance increased with increasing contain of Alumina. Results from the numerical modeling, it is clear that residual thermal stresses gradually decreased from the interface to the edges of functionally graded sample whereas in Copper/Alumina joint there is very high thermal residual stress in the joint interface.

امثلية عمليات اللحام باستخدام مصفوفة التضارب == Optimization Of Welding Processes Using Confusion Matrix

Author name: حسين خليل برهان
Supervisor name: حيدر الجبوري
General topic: Production engineering metallurgy and materials
Specific topic: Metals Engineering
Degree: Higher Diploma
University: University of Babylon - Faculty Of Materials Engineering - Department Of Metallurgical Engineering
Language: English
University location: Babylon
First pages:
Abstract: Welding is a materials joining process in which two or more parts coalesced at their contacting surfaces by suitable application of heat and/or pressure.The proposed system consist of three stages : - First stage : preparing the actual samples from the previous research. These stage have multi tests (i.e, residual stress, fatigue life, impact energy, hardness and tensile strength) - Second stage : Translated the result of previous stage depending on speed of welding and heat input. The mechanical properties was related to the heat input and the temperature of the processes of welding. The quantity of the heat input was increased when the speed of welding was slow and heat input decrease when the speed of welding was high, this high heat input led to form coarse grain and this led to decrease the mechanical properties.Third stage : generated software system used different types of error measures, this software include two phase, the first phase is to estimate the error between the actual and predicted tests. While the second phase is to verification of the result phase on the person correlation measures, and this phase show high correlation among welding processes. In general these correlation lied from +1. The verification occur base on the measures of confusion matrix, (i.e SSE, MSE, RMSE ,MAPE, MPE and MAE ).The system satisfy the following results (Accuracy equal 84.37%, True positive (TP) equal 86.66 % and Precision equal 96.2% ).

تاثير معدل التبريد على خواص سبيكة Ag - Cu - Sn == Effects Of Cooling Rate On Roperties Of (Ag - Cu Sn) Ternary Alloy

Author name: جمان حيدر ساجت
Supervisor name: حيدر حسن جابر جمال الدين
General topic: Production engineering metallurgy and materials
Specific topic: Metals Engineering
Degree: Higher Diploma
University: University of Babylon - Faculty Of Materials Engineering - Department Of Metallurgical Engineering
Language: English
University location: Babylon
First pages:
Abstract: Dental fillings is widely used because of good mechanical properties and low cost but also was one of the more fillings topic of discussion and it studied continuously.The objective of this research is studing the effect of the cooling rate on the phases and properties of amalgam. two alloys were prepared by two types of casting (die casting and sand casting) with fixed percentage of tin, copper, silver and zinc for both alloys respectively about (7.5gm, 6.25gm , 10.75gm , 0.5gm).The process done by using an electric furnace in an inert gas atmosphere of argon and alloys thermally treated at a temperature (400C?) for a period of four hours for the purpose of homogenization phases alloys. And then it was studying the microstructure using an optical microscope. And using X - ray diffraction to determine the phases in alloys.The phase evaluation showed that the phases in the amalgam alloy (die alloy) has ? (Ag3Sn) , ? (Cu3Sn), and one other phase ? (Cu6Sn5) and the phases in the amalgam alloy (sand alloy) has ? (Ag3Sn) and ? (Cu3Sn). Then alloys have been converted into powder using a ball mill. The powder was treated thermally output for temperature (100C?) for a period of three hours atmosphere vacuum to remove internal stresses.The amalgam manufactured according to the ADA specification No.1 where he was mixing 0.8gm from each of the mercury and the powder for 30 seconds mined device and then put the dough, resulting in the mold of Teflon and sheds them straining compression amount (14MN / m2) for a period of 85 seconds still stress after that, the sample isextracted from the mold after the half - hour and placed in a glass chamber at a temperature of 37 ± 1C?.Microstructure of the amalgams were studied primarily by x - ray diffraction, optical microscopy.The phase analysis of two amalgams shows two phases; ?1, ?.studied the mechanical properties (tensile, compression, creep, dimensional change, hardness) and the result was that all properties effected with the change of the colling rate.It was conducted two types of corrosion tests are testing the open circuit (OCP) and potentiodynamic polarization in industrial saliva solution at a temperature of 37 ± 1C?.

خواص الطلاء الكهربائي للفولاذ واطئ الكاربون باستخدام الزنك والالومينا النانوية كمادة مركبة للطلاء == Characterization Of Electroplating Of Low Carbon Steel Using Zn-Nano Sized Al2O3 As Composite Coatings

Author name: لبنى منير هادي تاج الدين
Supervisor name: كاظم فنطيل السلطاني
General topic: Production engineering metallurgy and materials
Specific topic: Metals Engineering
Degree: Master
University: University of Babylon
Language: English
University location: Babylon
First pages:

تاثير اضاقة الكرافيت على الخواص الميكانيكة و التشغيلية لسبيكة الالمنيوم برونز == Graphite Effects On Mechanical And Machining Properties Of Aluminum Bronze

Author name: هالة حازم عبد الحق القيسي
Supervisor name: حيدر عبد الحسن العذاري | علي هوبي حليم
General topic: Production engineering metallurgy and materials
Specific topic: Metals Engineering
Degree: Master
University: University of Babylon
Language: English
University location: Babylon
First pages:

تاثير المعاملات الحرارية وعناصر السبك (الفضه،الكادميوم) على خواص سبيكة المنيوم-نحاس-مغنيسيوم == Effect Of Heat Treatments And Alloying Elements (Ag,Cd) On Properties Of (Al - Cu - Mg) Alloy

Author name: احلام حامد جاسم حمادي
Supervisor name: جاسم محمد سلمان المرشدي
General topic: Production engineering metallurgy and materials
Specific topic: Metals Engineering
Degree: Master
University: University of Babylon
Language: English
University location: Babylon
First pages:

دراسة استخدام مركب لاعضوي (ليثيوم - المنيوم هيدرايد) في انتاج وخواص سبائك الالمنيوم - ليثيوم == Study of using inorganic compound (Lithium-Aluminum Hydride) for production and properties of (Aluminum-Lithium) alloys

Author name: سرى عبد الزهرة محسن الفتلاوي
Supervisor name: عبد الواحد كاظم راجح البكري | جليل كريم احمد الخفاجي
General topic: Production engineering metallurgy and materials
Specific topic: Metals Engineering
Degree: Master
University: University of Babylon
Language: Arabic
University location: Babylon
First pages:

دراسة متغيرات اللحام الليزري لنوعين مختلفين من الفولاذ المقاوم للصدا 304 و 430 == Studying the laser welding parameters of dissimilar 304 to 430 stainless steels

Author name: سارة ستار فرهود
Supervisor name: جاسم محمد سلمان المرشدي | احمد عودة الربيعي
General topic: Production engineering metallurgy and materials
Specific topic: Metals Engineering
Degree: Master
University: University of Babylon - College Of Engineering - Department Of Materials Engineering
Language: English
University location: Babylon
First pages:

تقييم اداء الاسفلت المعدل باستخدام مسحوق مخلفات الاطارات لتطبيقات الطرق == Evaluate the performance of modified asphalt using waste tires ground for roads applications

Author name: منتظر محمد حسين موسى الشيباني
Supervisor name: محمد حمزة المعموري
General topic: Production engineering metallurgy and materials
Specific topic: Polymer
Degree: Master
University: University of Babylon - College Of Engineering - Department Of Materials Engineering
Language: English
University location: Babylon
First pages:

تحضير مادة مطاطية مركبة لغرض تصنيع حشوة كور == Preparation of Rubber Composite Material for Engine Gasket

Author name: مهيمن ثامر محمد نعمة
Supervisor name: محمد حمزة المعموري
General topic: Production engineering metallurgy and materials
Specific topic: Polymer
Degree: Master
University: University of Babylon - College Of Engineering - Department Of Materials Engineering
Language: English
University location: Babylon
First pages:

تاثير التزجيج على الخصائص المختلفة للخرسانة الخلوية == The Influence of Glazing on Different Properties of Cellular Concrete Blocks

Author name: لمى محمد عبد الحسين العيساوي
Supervisor name: الهام عبد المجيد | سمير حامد عواد
General topic: Production engineering metallurgy and materials
Specific topic: Ceramic
Degree: Master
University: University of Babylon - College Of Engineering - Department Of Materials Engineering
Language: English
University location: Babylon
First pages:

تحضير ودارسة سبائك متدرجة الوظائف ذات اساس من الالمنيوم == Preparation And Studying Of Functionally Graded Al Based Alloys

Author name: هبة عماد جواد الطحان
Supervisor name: عبد الرحيم كاظم عبد علي الفتلاوي | جميل حبيب غازي العمار
General topic: Production engineering metallurgy and materials
Specific topic: Metals Engineering
Degree: Master
University: University of Babylon - College Of Engineering
Language: English
University location: Babylon
First pages:

دراسة تاثير عوامل التشغيل الكيميائي للفولاذ المقاوم الصدا 420 == Studying The Influence Of Chemical Machining Parameters For Stainless Steel 420

Author name: نسرين داخل فهد
Supervisor name: حيدر عبد الحسن العذاري | كاظم فنطيل السلطاني
General topic: Production engineering metallurgy and materials
Specific topic: Metals Engineering
Degree: Master
University: University of Babylon - College Of Engineering
Language: English
University location: Babylon
First pages:
1 ... 9 10 11 12 13 ... 16