Show: 25 50 75 100 Results

Search results: 25 out of 274

تصميم وتنفيذ رادار تضمين التردد ذو الموجة المستمرة لنظام السرعة التكيفي للسيارات == Design And Implementation of Frequency Modulation Continuous Wave Radar For Adaptive Cruise Control of Car Applications

Author name: تمارا زهير فاضل
Supervisor name: منال حمادي جاسم
General topic: Electrical, Electronic and Communications Engineering
Specific topic: Electronics and Communications Engineering
Degree: Master
University: University of Technology - Electrical Engineering Department - Electronic Engineering Branch
Language: English
University location: Baghdad
First pages:
Abstract: The traffic accidents became significantly obsession and concern for all members of society, and has become one of the most important problems that sap physical, human resources and human potential. The researches show that the damaged property and other costs may equal 3% of world’s gross domestic product, which have been required to work in finding solutions and suggestions and put them into practice to reduce these incidents.The insertion of preventive safety applications into the car system can avoid the above mistakes. In this work, a design and implementation of Frequency Modulation Continuous Wave (FMCW) radar system working at 77GHz for Adaptive Cruise Control (ACC) technology is proposed. Using MATLAB R 2013 which is a flexible system to estimate the speed and distance in accordance to vehicle ahead, which reduces the forces on the rate of accidents by warning the driver when two vehicle become too close.Also, the principle of FMCW radar is presented to generate Linear Frequency Modulated Continuous Wave (LFMCW) sweep waveform through frequency bands with triangular frequency modulation using Voltage Control Oscillator (VCO), a triangle sweep pattern adopt will resolve ambiguity without Doppler processing. which improves the decision making before hardware implementation.Proteus Professional v8 and Micro C PRO v 6.1 compiler is used for Peripheral Interface Controller (PIC) to design a proposed collision warning circuit with PIC16F887 and RS_232 serial port to send data using USART terminal for (short, middle, large) test range.A serial communication interface is used for sending the simulation results from MATLAB FMCW radar system to hardware easy PIC v7 board with PIC16F887 to forward collision warning circuit to alerts the driver of collision risk, Liquid Crystal Display (LCD) shows radar status (short, middle, large) in accordance to range between the vehicle that FMCW radar installed and the vehicle ahead.Graphic Liquid Crystal Display (GLCD) shows the car position and road lines. Piezo Buzzer will start singing to alerts the driver from danger road.The simulation design is achieving the desired performance, one parameter warrants further attention. In the FMCW configuration, the sweep time is about 25 microseconds. Therefore, the system needs to sweep a 140 MHz band within a very short period. Such an automotive radar may able to meet the cost requirement.

تقييم اداء الكشف المباشر والمتشاكه في نظام اتصال الليفة الضوئية == Performance Evaluation of Direct And Coherent Detections In Optical Fiber Communication System

Author name: علاء عبد الزهرة جعفر
Supervisor name: علي يوسف فتاح
General topic: Electrical, Electronic and Communications Engineering
Specific topic: Electronics and Communications Engineering
Degree: Master
University: University of Technology - Electrical Engineering Department - Electronic Engineering Branch
Language: English
University location: Baghdad
First pages:
Abstract: تطورت خدمات الاتصالات بشكل متسارع في السنوات القليلة الماضية خصوصا في المسافات بعيدة المدى وبمعدل نقل البيانات بدقة عالية وخسائر قليلة في جميع انحاء العالم. وقدمت تقنيات مختلفة لزيادة سعة الارسال في انظمة اتصالات الالياف الضوئية بواسطة جمع مسارات البيانا | In recent years, there has been an extensive development of optical fiber services. They provide transmission over long distances at a high data rate with few losses all over the world. Different techniques have been introduced to increase the transmission capacity of optical fiber communication systems by a multiplexed high data rate stream into an optical fiber such as Dense Wavelength Division Multiplying (DWDM) technique. Since the deployment of DWDM technique, the focus on introducing large system capacity with high system performance, different detection techniques have been introduced to enhance the system performance with high sensitivity. In this work, two types of detection techniques (direct and coherent detection) have been evaluated and compared with each other. These detection techniques have been evaluated based on several models of encoding format such as Return to Zero - Differential Phase Shift Keying (RZ - DPSK) and Non Return to Zero - Differential Phase Shift Keying (NRZ - DPSK) at 10 Gb/s as a data rate.These systems were first simulated with a single channel to analyze the performance with no Stimulated Raman Scattering (SRS), Cross Phase Modulation (XPM) and Four Wave Mixing (FWM) effects. Whereby the system of 8×10 Gb/s is simulated at 200 GHz, 100 GHz and 50 GHz as channel spacing. Three types of dispersion compensation schemes are used in the link channel. These systems are simulated using (Optisystem version 10.0) software package. The performance of the designed systems are evaluated through Q.factor verses input power and Bit Error Rate (BER) verses Signal to Noise Ratio (SNR).The polarization interleaving is used with the WDM systems to decrease the nonlinear effects and the crosstalk arising among the adjacent channels.The obtained results of the 67% RZ - DPSK arrived to the threshold power at input power less than of the 50% RZ - DPSK, as well as the 50% RZ - DPSK system arrived to maximum Q.factor lower than 33% RZ - DPSK. This is due to the pulse duration of 33% RZ - DPSK is smaller than of 50% and 67% RZ - DPSK.The results show that the coherent detection technique has better performance than the direct detection technique. The coherent detection technique has Q.factor equal to 45, while the direct detection has Q.factor equal to 27 at the same input power ( - 5dBm), while the coherent detection technique arrived to the threshold power at the input power less than of the direct detection technique.The BER of the 33% RZ - DPSK with coherent detection with 10 Gb/s at 300 km as transmission distance achieved ?10?^( - 12.9) at SNR of 10 dB, while for the 33% RZ - DPSK with direct detection is achieved a BER of ?10?^( - 8.8) with SNR of 10 dB.The performance of the proposed systems has been improved extrusivly with increase the space channel, where the performance of the systems at 200 MHz as channel spacing has best performance than 50 MHz as channel spacing.By adapting coherent detection with 33% RZ - DPSK technique of 200 MHz as channel spacing, DWDM system can carry high data rate with long - haul transmission distance.

تصميم وبناء هوائي عريضة الشريط باستخدام المواد المسماة مابعد المادة == Design And Implementation of Ultra - Wideband Metamaterial Antenna

Author name: مروه مكي حمد
Supervisor name: طه احمد عليوي | سليمان مرتضى عباس
General topic: Electrical, Electronic and Communications Engineering
Specific topic: Electronics and Communications Engineering
Degree: Master
University: University of Baghdad
Language: English
University location: Baghdad
First pages:
Abstract: This study focused on designing and analyzing patch antennabased metamaterial with the aid of partial ground plane. High Frequency Structure Simulation (HFSS) software was used to build and analyze a proposed unit cell of 4×4 mm² and resonant frequency of around 12 GHz. The unit cell was constructed from a patterned patch and ground plane that are connected with via through an FR - 4 substrate. The unit cell performances were studied in terms of S - parameters, effective refractive index, and dispersion properties. And it was found that the metamaterial properties appeared in the frequency band from 11 GHz to 14 GHz, where the unit cell exhibited less than 1 refractive index. A theoretical investigation based on TLM was developed to extract the values of thebasic lumped, RLC, elements network. It was found that the proposed unit cell behave like an unbalanced case of a passive constant k band elimination filter in the mentioned earlier frequency band. A parametric study based on numerical simulation was invoked to arrive to the optimal design through monitoring the effects of adding the MTM structures on the antenna performance. Therefore, this parametric study was optimized to achieve maximum bandwidth with relatively best gain.Finally, the optimal design was fabricated, measured and compared with the numerical results, obtained from Computer Simulation Technology (CST) and HFSS, in term of radiation pattern, S11 spectrum and gain. The experimental results confirmed that the gain of the antenna was 5.8 dBi at 10 GHZ with excellent matching over a wide range of frequencies. Furthermore, acceptable agreement was achieved between measured and simulated results in terms of S11 spectrum and radiation patterns at 10 GHz.

تجزئة الحزمة لالغاء الضوضاء المتكيف في تنقية الاشارة الكلامية == Subband Decomposition For Adaptive Noise Cancellation In Speech Enhancement

Author name: حوراء فاضل عبيد
Supervisor name: منال جميل الكندي
General topic: Electrical, Electronic and Communications Engineering
Specific topic: Electronics and Communications Engineering
Degree: Master
University: Al-Nahrain University - College Of Engineering - Department Of Electronic And Communications Engineering
Language: English
University location: Baghdad
First pages:
Abstract: Nowadays speech processing methods are usually implemented in the time or frequency domain. Filter bank can be considered as a divide and conquer approach within signal processing, since large problems are sub - divided into many smaller problems. While filter banks are essential components of speech processing, and in signal processing in general, they will have the focus in present days. An adaptive filter is a filter that self adjusts its transfer function according to its optimizing algorithms. Least mean square algorithm has slow convergence when used with nonstationary signals like speech and it has high computational cost but normalization of step size (or input signal) leads to a useful variant of the LMS algorithm known as the normalized LMS (NLMS) algorithm, which gives better convergence characteristics than the LMS because it uses a variable step - size with respect to the input signal power.To improve the convergence rate and/or computational complexity and also to overcome the disadvantage of a full band adaptive filtering, a structure is illustrated that is subband adaptive filtering; this will converge faster at a lower computational cost for speech and white noise inputs.This research shows most types of subband decomposition structures and makes comparison among them based on their performance to cancel the noise with minimum computational complexity, maximum convergence speed and maximum noise cancellation with lowest delay.Moreover three new hybrid tree configurations or the tree decom - position are proposed to maximize the overall performance of adaptive noisecancellation system.They are given the abbreviations HTPSAF1,HTPSAF2 and HTPSAF3. These three systems use polyphase filter bank that has showed a noticeable increase in the convergence speed and large reduction in the computational complexity due to the lower number of coefficients that can be achieved for the analysis/synthesis filters, which in turn will result in minimum delay in the reconstructed output speech signal.The algorithm of subband decomposition structures has been described theoretically then modeled under MATLAB simulation program using built - in filters and real input signals.

تصميم وتنفيذ منظومة مقاييس متوزعة ذكية == Design And Implementation of A Smart Distributed Metering System

Author name: مهند غازي خميس
Supervisor name: عدي عبد اللطيف عبد الرضا
General topic: Electrical, Electronic and Communications Engineering
Specific topic: Electronics and Communications Engineering
Degree: Master
University: University of Baghdad
Language: English
University location: Baghdad
First pages:
Abstract: This work is concerned with designing and implementing a smart energy metering system that consists of two smart energy meters and a billing center. The designed smart energy meter is a single phase meter in which the amount of consumed energy is calculated using PIC18F45K22 (which is a Peripheral Interface Controller (PIC)) and utilizing ACS758 (which is a Hall - effect based liner current sensor Integrated Circuit (IC)).The amount of consumed energy is sent to the billing center (which is implemented by using a laptop) for issuing the bills. The billing center receives the consumption data and sends the switching commands by utilizing an external communication technology. After comparing various communication technologies, ZigBee is chosen for this work.Two smart energy meters are implemented to test various communication conditions, such as multi - hopping. The design of the two smart energy meters differ only in the ZigBee addresses in the network.The program for the PIC's in the smart meters is written with MikroC PRO V6.0.1, while the program for the laptop in the billing center is written with Visual BASIC 6.

التشوه بالتوافقيات في اشارات التدفق للمتحسس السعوي الحيزي المثبت خارجيا == Harmonic Distortion In The Flow Signals of Externally Mounted Capacitive Spatial Filter

Author name: مروه مالك حسوني
Supervisor name: عباس احمد الشالجي
General topic: Electrical, Electronic and Communications Engineering
Specific topic: Electronics and Communications Engineering
Degree: Master
University: Al-Nahrain University - College Of Engineering - Department Of Electronic And Communications Engineering
Language: English
University location: Baghdad
First pages:
Abstract: This thesis investigates the performance of some windows on the flow signals that are generated from the planar capacitance spatial filter (PCSF) according to the moving of the solid particle in the channel of the filter. The sensor that operates as non - invasive device for solid flow measurement utilizes the thin wall of a dielectric pipe section as a shielding layer to protect the sensor from erosion, rust and moisture, and to make it more versatile.The finite - difference model equations are solved using successive over relaxation (SOR) methods. The waveforms show that the response of the PCSF is spatially - biased towards particle flowing closer to the plane of sensing electrodes and that the resulting flow signal is non - sinusoidal. The SOR method that is used to compute the PCSF potential fields has been investigated using a mesh of 110 by 32 nodes, and the algorithm was programmed in MATLAB (Release 2013a) using an Intel core ™ i3 PC,CPU processor.To study the effect of the total harmonic distortion (THD) content on the flow signals that are calculated with respect to the fundamental frequency of the power spectrum density through a specific quantitative criterion, this work comprises a comparative study among three types of windows; Hanning, Hamming, and a subOptimal window called the Kaiser window.The effect of particle flying heights, relative permittivity and size on the THD of the flow signal were examined. It was found that theTHD of flow signals at heights closer to the plane of sensing electrodes is high and decreasing gradualy when the particle flying height is far above the sensor. All the three windows used in this work have better suppression of harmonics distortion as compared with unwindowed (raw) flow signal.

طرائق الكشف للتضمين الترددي المتعامد للرابط النازل في نظام تطور طويل الامد (LTE) == Detection Methods For Ofdm Downlink In Long Term Evolution (LTE) System

Author name: اكرم جبار عبد الحسين حسن
Supervisor name: يمان اسماعيل مجيد
General topic: Electrical, Electronic and Communications Engineering
Specific topic: Electronics and Communications Engineering
Degree: Master
University: University of Baghdad
Language: English
University location: Baghdad
First pages:
Abstract: GPP3 التطور على المدى الطويل (LTE) هو تقنية الجيل الرابع اللاسلكية ذات النطاق العريض. هدفه الرئيسي هو تعزيز الكفاءة الطيفية باستخدام تقنيات التضمين الترددي المتعامد بالتقسيم (OFDM). ومع ذلك، ياتي هذا التحسن في الاداء بزيادة التعقيد الحسابي في اجهزة الاستق | 3GPP Long Term Evolution (LTE) is the fourth generation mobile wireless broadband technology. Its key objective is to enhanced spectral efficiency by using Orthogonal Frequency Division Multiplexing (OFDM) techniques. However, this performance improvement comes at the cost of increased computational complexity in the receiver. The goal of this work is to introduce a detection method that gives a better performance with reasonable computational complexity for LTE mobile communication system. An approximated linear baseband model for the two modulation techniques used by the LTE system (which is the Quadrature Phase Shift Keying (QPSK) and sixteen - level Amplitude Modulation (16 - QAM)) have been derived. Three receivers have been simulated and tested. The three receivers use Least Square (LS) channel estimator. These receivers uses channel compensator, decision feedback equalizer and perturbation algorithm. The LTE communication system has been simulated using MATLAB®7 programming language. The results of the computer simulation show that the perturbation algorithm gives an enhancement in the receiver performance of about 2 dB in different mobile channels than decision feedback equalizer and about 5 dB than channel compensator at the 10 - 3 of BER.

بناء خوارزمية تزامن لانظمة (OFDM) باستخدام معالجة الاشارة الرقمية == Dsp - Based Synchronization Algorithm Implementation For OFDM System

Author name: رائد ستار جبر
Supervisor name: محمود عبد القادر عبد الستار
General topic: Electrical, Electronic and Communications Engineering
Specific topic: Electronics and Communications Engineering
Degree: Master
University: University of Baghdad - College Of Engineering - Department Of Electrical Engineering
Language: English
University location: Baghdad
First pages:
Abstract: تعدد الارسال للتردد بالتقسيم المتعامد (OFDM) هو مفتاح تمكين التكنولوجيا لمعظم انظمة الاتصالات اللاسلكية الحالية ذات معدل نقل البيانات العالي. والميزة الرئيسية للـ (OFDM) مقارنة بالطرق التقليدية هو انه يحول القناة ذات النطاق العريض الى قنوات فرعية ضيقة متو | Orthogonal Frequency Division Multiplexing (OFDM) is the key enabling technology for most current high data - rate wireless communication systems. The primary advantage of OFDM over conventional schemes is that it converts a wideband channel into parallel narrowband sub - channels allowing relatively simple channel estimation and frequency domain equalization. It is as an effective technique for coping with channel impairments like multipath propagation and Inter Symbol Interference (ISI) by making use of an appropriate cyclic prefix. One of the major drawbacks of OFDM is that it is more sensitive to synchronization errors than its single carrier counterparts. This thesis describes a real - time implementation of a timing and frequency synchronization for OFDM system using MATLAB software Simulink, DSP processor TMS320C6713 and Code Composer Studio (CCS). The hardware interface converts the baseband signal from the PC to the DSP Processor. Basic transmission and reception performances are evaluated in real time using Real Time data Transfer (RTDX). The practical results and performance evaluation of the synchronization algorithms in OFDM system is presented and discussed. The results are plotted for different offsets of CFO and STO with different values of signal to noise ratio. Also the bit error rate (BER) and the mean square error (MSE) of the system is analyzed. The results show that the time offset more effect than frequency offset because of ISI and ICI occurs when time offset occur in the system. The synchronization algorithm is found to be robust for both CFO and STO simultaneously. It can handle offset of about CFO = 500 Hz and STO = 14 samples simultaneously without wasting extra bandwidth. This algorithm used for synchronization more robust for 16QAM compared with 4QAM modulation.

تاثير اللاخطية في الالياف البصرية على اداء نظام تجميع الاطوال الموجية الضوئية المنقسمة باستخدام تقنية الاستقطاب المزدوج لتقسيمات التردد المتعامد الضوئي == Effect of Fiber Nonlinearity On The Performance of WDM Optical Systems Using Dual Polarization CO - OFDM Technique

Author name: بشار مظفر احمد
Supervisor name: رعد سامي فياض
General topic: Electrical, Electronic and Communications Engineering
Specific topic: Electronics and Communications Engineering
Degree: Master
University: Al-Nahrain University - College Of Engineering - Department Of Electronic And Communications Engineering
Language: English
University location: Baghdad
First pages:
Abstract: The implemented existing high capacity optical networks are based on 50 GHz wavelength - division multiplexing (WDM) channel spacing and carry up to 50 Gb/s data rate per channel. In recent years, there is increasing interest in using dual - polarization (DP) technique to enable future systems with at least 100 Gb/s rate per channel to operate over existing optical networks. The performance of these advanced systems can be enhanced further by using coherent optical orthogonal frequency division multiplexing (CO - OFDM) technique which offers high spectral efficiency and outstanding tolerance of fiber dispersion.This thesis addresses the effect of fiber nonlinear optics on the performance of dual polarization CO - OFDM/WDM system operating with 100 Gb/s per channel. Different modulation formats, namely BPSK, QPSK and 16 - QAM, are used. First, the performance of a single - channel system is investigated in the absence and presence of fiber nonlinearity. The results are compared with those of a conventional (single - polarization) system to identify the key role played by the DP technique. The investigation is then extended to WDM systems incorporating DP - OFDM technique. The results reveal that the effect of fiber nonlinearity can be reduced or cancelled by using optimum transmitter laser power Popt. Further, the value of Popt is a function of transmission distance,number of multiplexed channels, and modulation formats. Popt of - 11, - 12, and - 5 dBm is needed for a ten - channel DP system operating with BPSK, QPSK, and 16 - QAM formats, respectively.Simulation results presented in this thesis are obtained using OptiSystem (version 11.1) which is a commercial software package.

الغاء تداخل المسا ارت التخميني في انظمة الوصول المتعدد باستخدام تقسيم الترميز الواسع الطيف لشبكات الاتصال اللاسلكية == Multipath Interference Cancellation Investigation In Wcdma Communication Networks

Author name: نور محمد خليل
Supervisor name: منال جميل الكندي
General topic: Electrical, Electronic and Communications Engineering
Specific topic: Electronics and Communications Engineering
Degree: Master
University: Al-Nahrain University - College Of Engineering - Department Of Electronic And Communications Engineering
Language: English
University location: Baghdad
First pages:
Abstract: Bit Error Rate (BER) and Bit Energy to Noise Ratio(?????????) performance of the 1 - D RAKE receiver without , with Space Time Transmit Diversity (STTD) and 2 - D RAKE without , with (STTD) and also without and with beamforming for WCDMA over RayleighChannel in presence of Additive White Gaussian Noise (AWGN) channel is demonstrated with purpose of making simulation of m - files developed in Matlab.Results are evaluated in terms of BER and ????????? considering the number of Base Station (BS) transmit antennas (1 - D RAKE and 2 - D RAKE receivers), and the number of RAKE fingers (1 - D RAKE receiver) and the number of Mobile Station (MS) receive antennas (2 - DRAKE receiver). The performance results of 1 - D RAKE and 2 - D RAKE receivers showed that the receivers have satisfactory BER performance and the performance of RAKE receivers is more improved by increasing the number of RAKE fingers, performance is even better when beamforming was applied.The performance results of the three receive diversity of 2 - D RAKE receiver schemes : Selection Combining (SC), Equal Gain Combining (EGC) or Maximal Ratio Combining (MRC)) of 2 - D RAKE showed that there are significant improvements in BER and ?????????performance over the 1 - D RAKE. BER of 10???? can be obtained at ????????? ? 5 dB performance with four fingers of 2 - D RAKE receiver with STTD and beamforming and MRC scheme for five receive antenna elements.

تحسين جودة الصورة التوموغرافية المعاد تركيبها باستخدام خوارزمية التسقيط العكسي المرشحة == Enhancement of Tomographic Image Quality Reconstructed By Filter Backprojection Technique

Author name: دعاء نوفل حازم
Supervisor name: محمد حسين الحياني
General topic: Electrical, Electronic and Communications Engineering
Specific topic: Electronics and Communications Engineering
Degree: Master
University: Al-Nahrain University - College Of Engineering - Department Of Electronic And Communications Engineering
Language: English
University location: Baghdad
First pages:
Abstract: Computed tomography refers to the imaging of slices of an object by exposing them to X - ray in different directions. Measurement of image quality is one of great importance in the field of medical applications. In applications such as CT and MRI scanning, most of the time the quality of reconstructed image is assessed qualitatively by radiologist or domain experts which are purely subjective evaluation.The FBP algorithm produces excellent quality and high performance reconstruction compared with other reconstruction algorithms. This thesis presents different projection types (fan beam geometry, and cone beam geometry) for the image reconstruction, the geometries are calculated analytically by specified 2D head phantom for fan beam and 3D head phantom for single slice spiral cone beam geometry with different ranges covering angle.In the thesis the FBP algorithm was applied with the fan beam and single slice geometries. Different types of filters (Hann, Hamming, Kaiser, Cosine, Ram - Lak, and Gaussian) are used in the algorithm and a new window filter is proposed in the algorithm. Comparisons are made between the new window and different common windows by quality measurement to get a reconstructed image with high quality and high performance suitable for the implementation of the FBP.A computer programs has been designed, written, and implemented in this work using MATLAB 7.1, for fan beam and single slice projections. Good results of quality and performance were obtained for the tomographic reconstructed image from its projection on CT scanner.

تصميم وتنفيذ نظام واي ماكس ذو المعيار باستخدام حقل المصفوفات القابلة للبرمجة IEEE 802.16d == Design And Implementation Of IEEE 802.16D Wimax Baseband System Using FPGA

Author name: قاسم هادي كريم
Supervisor name: محمود عبد القادر عبد الستار
General topic: Electrical, Electronic and Communications Engineering
Specific topic: Electronics and Communications Engineering
Degree: Master
University: University of Baghdad
Language: English
University location: Baghdad
First pages:

حساب الوثوقية في انظمة الاتصالات اللاسلكية == Reliability Evaluation For Wireless Communication System

Author name: ياسمين عبد الغني اليوزبكي
Supervisor name: اسماعيل محمد جابر
General topic: Electrical, Electronic and Communications Engineering
Specific topic: Electronics and Communications Engineering
Degree: Master
University: Mustansiriyah University - College Of Engineering - Department Of Electrical Engineering
Language: English
University location: Baghdad
First pages:

اتحاد الاحياء تحت انقاض البنايات باستخدام المنطق الضبابي == Detecting Trapped Alive Humans Under Buildings Ruins Using Fuzzy Logic

Author name: نورا هاني شريف عبد العزيز
Supervisor name: محي محمد جاسم العزاوي
General topic: Electrical, Electronic and Communications Engineering
Specific topic: Electronics and Communications Engineering
Degree: Master
University: Mustansiriyah University - College Of Engineering - Department Of Electrical Engineering
Language: English
University location: Baghdad
First pages:

تقييم المعالجين or-cfar و And - cfar لنماذج مختلفة من الاشارات غير المرغوب فيها == Evaluation Of AND - CFAR And OR - CFAR Processors Under Different Clutter Models

Author name: نجم عبد الله جازع
Supervisor name: وليد خالد عبد علي
General topic: Electrical, Electronic and Communications Engineering
Specific topic: Electronics and Communications Engineering
Degree: Master
University: Mustansiriyah University - College Of Engineering - Department Of Electrical Engineering
Language: English
University location: Baghdad
First pages:

Development Of Interprocess Communication Simulation For Distributed SCADA System

Author name: نادية اسماعيل
Supervisor name: sarkout N.Abdulla | Nazar AI rawas
General topic: Electrical, Electronic and Communications Engineering
Specific topic: Electronics and Communications Engineering
Degree: Master
University: Mustansiriyah University - College Of Engineering - Department Of Electrical Engineering
Language: English
University location: Baghdad
First pages:

ارسال البيانات عبر قناة العالية التردد باستخدام تقنية التعدد التقسيمي الترددي المتعامد == HF Data Transmission Using Orthogonal Frequency Division Multiplexing (OFDM)

Author name: مهند عصام عقاب الماضى
Supervisor name: Mahir K. M. Al-Azawi
General topic: Electrical, Electronic and Communications Engineering
Specific topic: Electronics and Communications Engineering
Degree: Master
University: Mustansiriyah University - College Of Engineering - Department Of Electrical Engineering
Language: English
University location: Baghdad
First pages:

اداء منظومة التقسيم الترددي المتعامد المتعدد الرباعية == Performance Of Quadrature Orthogonal Frequency Division Multiplexing System

Author name: علي عبد راضي
Supervisor name: حكمت نجم عبد الله
General topic: Electrical, Electronic and Communications Engineering
Specific topic: Electronics and Communications Engineering
Degree: Master
University: Mustansiriyah University - College Of Engineering - Department Of Electrical Engineering
Language: English
University location: Baghdad
First pages:

تعزيز سعة القناة متعددة المداخل متعددة المخارج باستخدام عوامل مختلفة == Enhancement Of MIMO Channel Capacity Based Different Factors

Author name: حسين يوسف راضي
Supervisor name: رعد حمدان ظاهر
General topic: Electrical, Electronic and Communications Engineering
Specific topic: Electronics and Communications Engineering
Degree: Master
University: Mustansiriyah University - College Of Engineering - Department Of Electrical Engineering
Language: English
University location: Baghdad
First pages:

كشف الاشارة ذات النغمة الوحيدة والاشارة المتتابعة المباشرة للطيف المنتشر بالاعتماد على نظرية الفوضى == Single Tone And Direct Sequence Spread Spectrum Signals Detection Based On Chaos Theory

Author name: حسين سلطان راضي
Supervisor name: ماهر خضير محمود
General topic: Electrical, Electronic and Communications Engineering
Specific topic: Electronics and Communications Engineering
Degree: Master
University: Mustansiriyah University - College Of Engineering - Department Of Electrical Engineering
Language: English
University location: Baghdad
First pages:

تشفير الصورة باستخدام الضاغط الحساس و النظام الفوضوي == Image Encryption - Based Compressive Sensing And Chaotic System

Author name: جنان نصيف شهاب
Supervisor name: ماهر خضير محمود
General topic: Electrical, Electronic and Communications Engineering
Specific topic: Electronics and Communications Engineering
Degree: Master
University: Mustansiriyah University - College Of Engineering - Department Of Electrical Engineering
Language: English
University location: Baghdad
First pages:

تحسين الاشارات الطورية المشفرة باستخدام الانظمة الذكية == Optimization Of Phase Coded Signal Based On Intelligent System

Author name: جنان اياد نامق
Supervisor name: وليد خالد عبد علي | حنان عبد الرضا عكار
General topic: Electrical, Electronic and Communications Engineering
Specific topic: Electronics and Communications Engineering
Degree: Master
University: Mustansiriyah University - College Of Engineering - Department Of Electrical Engineering
Language: English
University location: Baghdad
First pages:

الشيفرات النفاثة بمبدل مواقع فوضوي لنقل الصور عبر قنوات الخفوت رايلي == Turbo Codes With Chaotic Interleaver For Image Transmission Over Rayleigh Fading Channels

Author name: مصطفى جواد كطران موسى
Supervisor name: ماهر خضير محمود
General topic: Electrical, Electronic and Communications Engineering
Specific topic: Electronics and Communications Engineering
Degree: Master
University: Mustansiriyah University
Language: English
University location: Baghdad
First pages:

تصميم هوائي الوصلة الدقيقة باستخدام الهندسة الجزيئية والمواد ذات معامل الانكسار السالب == Design Of Microstrip Antenna Using Fractal Geometry And Metamaterials

Author name: اسراء حازم علي
Supervisor name: وليد خالد عبد علي | منير عبود هاشم
General topic: Electrical, Electronic and Communications Engineering
Specific topic: Electronics and Communications Engineering
Degree: Master
University: Mustansiriyah University
Language: English
University location: Baghdad
First pages:

الاعتماد على برمجة (PIC) كمعالج لنظام الهوائيات الذكية التكيفية == PIC Based Programming For Adaptive Smart Antenna System Processor

Author name: حسين محمد هذال
Supervisor name: عثام محمود عبد الباقي | عضيد حسن سلومي
General topic: Electrical, Electronic and Communications Engineering
Specific topic: Electronics and Communications Engineering
Degree: Master
University: Mustansiriyah University
Language: English
University location: Baghdad
First pages:
1 ... 8 9 10 11