عرض: 25 50 75 100 النتائج

نتائج البحث: 19 من أصل 69

تحضير اوكسيد القصدير ذو التراكيب النانوية على اوكسيد الالمنيوم المانود بطرق مختلفه == Synthesis of SnO2 nanostructure on anodic aluminum oxide by different method

اسم المؤلف: رحمه سعد محمد العبيدي
اسم المشرف: رعد سعدون صبري
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم تحضير قالب اوكسيد الالمنيوم المانود بعملية الانودة بخطوتين للحصول على افضل ترتيب للمسامات باستخدام حامض الاوكزاليك بشروط تحضير مختلفة مثل درجة حرارة المحلول (10,7و 15 درجة سيليزية) وفولتيات الانودة (30 و40 فولت.(نتائج المجهر الالكتروني الماسح للقالب المحضرعند 30 فولت بينت ان المسامات ذات قطر صغير وترتيب ضعيف. بينما 40 فولت , المسامات ذات قطر اكبر وذات ترتيب عالي. من خلال هذه الدرجات الحرارية الثلاثة المختلفة (10,7و 15 درجة سيليزية). وجد ان (10 درجة سيليزية) هي افضل درجة حرارية لتحضير مسامات ذات ترتيب عالي. اذا درجة الحرارة ازدادت فان قطر المسام سوف يزداد . عامل الوقت مهم جدا في هذه العمليه عندما وقت الانودة يقل فان اوكسيد الالمنيوم المانود اصبح رقيق جدا وهش ويتكسر بسهوله جدا وبالتالي ستكون هناك صعوبة في استخدامه كقالب ترسيب. عندما الوقت يزداد لاكثر من 12 ساعة في الانوده الثانيه فسمك القالب يصبح حوالي 44 مايكرو متر سيعطي افضل شرط لترسيب اوكسيد القصدير. في هذا البحث اربع طرق استخدمت لتحضير اوكسيد القصدير بشكل قضبان نانوية باستخدام قالب اوكسيد الالمنيوم المانود مثل طريقة الصول - جيل ,تقنية التغطيس والفلترة ,التفريغ والتقطير وطريقة التبخير الحراري. جميع نتائج فحوصات الاشعة السينية لكل طرق التحضير تبين ان اوكسيد القصدير هو تركيب متعدد التبلور وذات تبلور متجانس. طرائق تحضير الصول - جيل والتبخير الحراري تبين ان القضبان النانوية لاوكسيد القصدير لها نفس القطر والطول وافضل ترتيب واكثر تجانس . بينما القضبان النانوية لطرائق التحضير الاخرى تختلف في القطر والطول. | Anodic aluminum oxide (AAO) was prepared by anodization process with 2 - step to obtain the best order arrangement of pores using oxalic acid at different preparation conditions such as electrolyte temperature (7, 10 and 15 °C) and anodization voltages (30 and 40 V). SEM results of the template which prepared at 30V showed the pores with small diameter and poor order. While at 40V, the pores with large diameter and high quality order pores. From three different temperatures (7, 10 and 15 °C), it's found that 10°C is the best temperature to prepare high quality order pores. If the temperature increases, the pore's diameter will increase. The time factor is very important in this process; when the anodization time decrease, AAO becomes very thin, brittle and can break very easily. Thus, there will be a difficulty to use as a deposition template. When the time increase more than 12 hr in second anodization, the template thickness's will become 44µm which gives the best condition to deposit SnO2. In this research, four methods used to prepare SnO2 nanorods by using AAO template such as the sol - gel, immerse and filtration technique, vacuum and drop setting and thermal evaporation. The whole results of XRD for all preparation methods showed that SnO2 is polycrystalline and homogeneous crystal. The sol - gel and thermal evaporation methods revealed the SnO2 nanorods have the same rod's diameter, length, best order and highly homogeneous. While the nanorods of other preparation methods are different in diameter and length.

تقدير الحاصل النيتروني لبعض نوى النظائر المتوسطة نتيجة لتفاعلات البروتون وجسيمات الفا والنيوترون لمدى طاقة (E=10 - 50) MeV

اسم المؤلف: رافت عبد الحسن مسلم
اسم المشرف: خالد هادي مهدي العبيدي
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: للنظائر اهمية كبيرة في كثير من المجالات مثل المجالات البحثية والصناعية والطبية ومجالات اخرى. فبعضها يحتاج لنظائر بنصف عمر طويل او بنصف عمر قصير وحاصل نيتروني عالي او قليل للحالتين, لذا تضمن هذا العمل دراسة الخصائص النووية لتسعة عناصر متوسطة الاعداد الكتلية هي (Ca ,Sc ,Ti ,Ni ,Cu ,Zn ,Zr ,Nb ,Mo ), ولكل عنصر تم اختيار عشرة نظائر لذا تضمنت الدراسة 90 نظير اعدادها الكتلية بين (41 الى 96) , شملت هذه الدراسة حساب طاقة التفاعل, طاقة العتبة, الكتلة المختزلة, طاقة فصل النيوترون وطاقة الربط النووية لتفاعلات ,Ca(α,n)Ti Ni(α,n)Zn , Zr(α,n)Mo , ,Sc(p,n)Ti ,Cu(p,n)Zn Nb(p,n)Mo , ,Ti(n,n)Ti Mo(n,n)Mo ,Zn(n,n)Zn لنظائر العناصر اعلاه , كما تم حساب قدرة الايقاف باستعمال برنامج (SRIM 2013) ومن ثم حساب الحاصل النيتروني من المعادلات النظرية اعتمادا على احدث ما نشر من المقاطع العرضية للعامين (2010 ,2012 ), كما تم في هذه الدراسة استخراج مجموعة من المعادلات شبه التجريبية الموحدة لحساب المحصول النيتروني لهذه العناصر بشكل مباشر لنوعين من التفاعلات (α,n) و(p,n) والتي كل منها يشتمل على عشرة نظائر ليكون المجموع 60 تفاعل, نتائج الحاصل النيوتروني المحسوبة من هذه المعادلات اعطت توافقا جيدا مع القيم النظرية التي حسبت من المعادلات النظرية. هذه المعادلات مع ثوابتها وضعت ضمن برنامج ماتلاب صمم لهذا الغرض وبالاعتماد على نوع العنصر ونوع التفاعل وطاقة الجسيم الساقط لايجاد الحاصل النيتروني لاي نظير عدده الكتلي بين (40 - 100 ) لمدى طاقة يتراوح بين (15 - 50) مليون الكترون فولط. يمكن تطوير البرنامج ليشمل عدد اكبر من العناصر بنظائرها ولمديات طاقة اوسع. | Isotopes have a great importance in many fields such as research, industrial, medical and other. Some of them need isotopes with long half life or short half - life with high neutron yield or less for them. So this work included the study of the nuclear properties for nine medium elements (Ca, Sc, Ti, Ni, Cu, Zn, Zr, Nb and Mo), from each element we choose 10 isotopes, so the total are 90, their masses numbers were between (41 to 96), this study included the calculations of the Q - value reaction, threshold energy, reduced mass, separation energy of neutron and the binding energy for nuclear reactions , Ca(α,n)Ti , Ni(α,n)Zn , Zr(α,n)Mo , Sc(p,n)Ti , Cu(p,n)Zn , Nb(p,n)Mo , Ti(n,n)Ti Mo(n,n)Mo and Zn(n,n)Zn for the isotopes of the above elements, also we calculated the stopping power by using a (SRIM 2013), then the neutron yield was calculated from theoretical equations depending on most recent cross - sections (2010.2012), as well as this study focused on the extraction of a set of uniform empirical equations to calculate the neutron yield in directly for (α, n) and (p, n) reactions for these elements, and each of them includes 10 isotopes so the total reactions are 60. The result of neutron yield for these equations was in a good agreement with theoretical value which is calculated from the theoretical equations. These set equations with their coefficients were put within the MATLAB program, it was designed for this purpose and by depending on the element type, the type of reaction and incident particle energy to find the neutron yield for any isotope, their mass number is between (40 - 100) for energy range within the (15 - 50) MeV. This program can be developed to include a greater number of elements with their isotopes and for larger energy range.

تصنيع كواشف ضوئية باستخدام اوكسيد التيتانيوم المطعم باوكسيد الخارصين ذو التركيب النانوي بواسطه تقنية الليزر النبضd == Fabrication of photovoltaic detectors using TiO2 doped with ZnO nanostructure by PLD technique

اسم المؤلف: ذرى طارق عباس
اسم المشرف: سمر يونس الدباغ
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: In this work, a Nd : YAG laser beam (λ=1064nm, repetition rate 6 Hz with the pulse duration 10ns) has been used to deposit thin films TiO2 pure and TiO2 doped with ZnO at different concentrations (2%, 5%, 7%) on glass and silicon substrates. The laser fluence is kept at 700 mJ/cm2 and the pressure is kept at 10 - 2 mbar to specify the optimum condition of deposition. TiO2 - ZnO thin films are investigated by using different techniques such as X - Ray Diffraction (XRD), Atomic Force Microscope (AFM), UV - VIS transmittance spectroscopy, Hall Effect and detector properties equipment.X - Ray Diffraction (XRD) results showed that by increasing ZnO concentration and annealing temperature (500°C) TiO2 transformed from amorphous structure to polycrystalline structure. AFM results showed that the RMS and the grain size was increased with increasing the concentration of zinc oxide. The root mean square (RMS) reachs to 15.2 nm at room temperature and after annealing temperature at 500°C reachs to 16.1nm. Also, the grain size increased with increasing ZnO concentration up to (100.12) nm at the concentration 7% after annealing temperature. UV - VIS transmittance measurements show that the transmittance were high in infrared region and decreases with increasing ZnO concentration and after annealing. Hall Effect is studied to estimate the type of carriers. From the results it was deduced that all (TiO2 : ZnO) films were n - type. As a result, it has been found that film structure and properties are dependent on annealing , as well as different concentrations.From the (I - V) measurements by using UV laser diode with a wavelength (385nm) found that the responsivity of the detector increased at concentration 7% reach to (3.39)A/W and after annealing in temperature 500°C reach (3.82)A/W.

تحضير ودراسة سلوكيات الرص لمتراكبات (الومينا - المنيوم) == Preparation & Studying the Compaction Behaviors of the (Alumina - Aluminum) Composite

اسم المؤلف: حنان جميل مصطفى
اسم المشرف: عبد الحميد رحيم مهدي الصراف
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم تحضير المتراكب السيرميتي (سيراميك - معدن) من مادة الالومينا (Al2O3 - γ( كمادة اساس، ومن معدن الالمنيوم (Al) كمادة تدعيم، لتراكيز مختلفة من الالمنيوم (0 - 50)%، ونسبة زيادة التدعيم 10)%).تمت عملية التشكيل باستعمال الضغط باتجاه واحد، وانجزت عملية التلبيد في جو مفرغ من الهواء. درست سلوكيات الرص بحالة التلبيد الصلبة عند درجات حرارة التلبيد (400، 450، 550) م° ، وازمان التلبيد (2، 4، 6) ساعات، وعند ضغوط تشكيل (50، 100، 150) بار، تم الحصول على افضل الخواص الفيزيائية عند (550م°، 2ساعات، 150ساعة). تمت دراسة حالة تلبيد الطور السائل كدالة لتغير نسبة الالمنيوم في المتراكب عند (800م°، 2ساعة، 150بار)، بناء على ما تم التوصل اليه من خواص فيزيائية جيدة عند حالة التلبيد بالطور السائل، اختيرت هذه المواصفات لدراسة تاثير تغير الضغط عند (50، 100، 150) بار على الخواص الفيزيائية للمتراكبات السيرميتية المحضرة. اظهرت السلوكية عند المنطقة التي تحتوي تركيز الالمنيوم (40 - 50)% افضل الخصائص الفيزيائية، تبعا لذلك، درست اغلب القياسات على التركيز صاحب نسبة 50% من مادة الالمنيوم. المفهوم الاساسي الذي تضمنته هذه الدراسة هو التلاصق الفيزيائي بين مكونات المتراكب السيرميتي المحضر، والذي كان واضح من فحص انحراف الاشعة السينية. كذلك من الفحص المجهري (SEM) نلاحظ ان المتراكب النهائي (السيرميتي) المحضر اشبه الى ما يكون جزر موصلة (مادة الالمنيوم) مفصولة بمناطق عازلة (مادة الالومينا) وهذا ناتج بفعل التلاصق الفيزيائي. لوحظ ان زيادة نسبة الالمنيوم للمتراكبات المحضرة يلعب دورا مهما في الخواص الفيزيائية والكهربائية والتي تم مناقشتها بالتفصيل، وكذلك حسن من قيمة الصلادة للمتراكبات المحضرة، حيث ان التوزيع العشوائي لدقائق الالمنيوم ضمن مادة الالومينا، كون اقرب الى ما يكون الى شبكة داخلية معدنية زادت من متانة المتراكب المحضر من خلال ملء المسامات الموجودة غالبا بسبب مادة الالومينا الهشة. من خلال هذه الدراسة توصلنا الى ان المتراكب المحضر له نسبة مسامية عالية والتي يمكن توظيفها في صناعة فلترات الوقود. كما يمكن توظيف الخواص العزلية المحسنة التي توصلنا اليها في صناعة المتسعات السيرميتية (cermet capacitors )، كذلك من خواص مقاومة البلى التي توصلنا اليها، ممكن توظيفها في تصنيع ادوات القطع والبرد بعد اجراء التحسينات اللازمة. | A cermet (ceramic - metal) composite have been prepared from alumina ceramic (γ - Al2O3) as a matrix and from aluminum metal (Al) as reinforcement, prepared for different concentrations of aluminum (0 - 50)%, the reinforcing increment is (10%).The forming process was done by single action pressing, and the sintering process was done in vacuum atmosphere.The compaction behaviors of prepared cermet bodies were studied in solid state sintering, at sintering temperatures (400, 450, 550) °C, sintering times (2, 4, 6) hrs. and forming pressures (50, 100, 150) bar, the best physical properties were gained at (550 °C, 2hrs., 150bar).Liquid phase sintering process was studied as a function of Al percent in the composite at (800 °C, 2 hrs., 150 bar). According to the interesting physical properties we gained from liquid phase sintering process, these parameters were chosen to study the effect of the forming pressure ((50, 100, 150) bar) on the physical properties of the prepared cermet bodies. The behavior at the region that have aluminum concentration (40 - 50)% showed the best physical properties, according to this, most of the measurements were studied on the concentration of 50% of aluminum material. The basic concept of this study is the physical adhesion between the material particles of the prepared cermet bodies, which was obvious from the XRD tests. Also from the SEM micrograph we have notice the final structure of the prepared cermet, which is more like conducting islands (aluminum) separated by isolated areas (alumina), which is a sequent of the physical adhesion action.Increasing of aluminum content in the composite materials prepared may play an important role in physical and electrical properties has been discussed in detail, also enhanced the hardness of the samples, where the random distribution of aluminum particles through the alumina material, makes more like internal web of metal, that helps to increase toughness of samples by filling the porosities existed because of the brittle alumina.From this study we noticed, we have relative high porosity that could be employed in fuel filters. Also we have fine dielectric properties that could inter the application of cermet capacitors. Also, we have reasonable wear result that can be employed in grinding and cutting tools after improvements have been done.

دراسة تاثير تركيزانابيب الكاربون النانوية متعددة الطبقات على الخصائص الفيزيائية لمتراكبات الايبوكسي == Study The Effect of Multi Walled Carbon Nanotubes (MWCNTs) Concentration on Physical properties of Epoxy composites

اسم المؤلف: الفت احمد محمود
اسم المشرف: خالد رشاد الراوي | عدوية جمعة حيدر
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Multi wall carbon nanotubes (MWCNTs) have excellent mechanical, electrical, and thermal properties. When MWCNTs incorporated in to polymer, that’s leads to better improvement in mechanical, electrical, and thermal properties result at low MWCNTs content. Due to the change in the electrical and mechanical properties MWCNTs / Epoxy composites have attracted significant research interest specially due to their potential for application in active control of strain sensing in composites structure or as strain sensor .Different type of MWCNTs, long and short (L - MWCNTs & S - MWCNTs) were used as reinforcement in epoxy resin with volume fraction ( 0.1,0.2, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0 ,4.5, & 5%) respectively were used to prepare epoxy composites in order to examine and study some of their mechanical properties ( tensile strength, Young's modulus, flexural strength, fracture toughness, flexural modulus, Impact strength, and microhardness ), conductivity properties (AC conductivity, thermal conductivity), and morphology properties (SEM,FTIR). Direct mixing processes use to prepared (Epoxy / MWCNTs) composites, its involved use ultrasonic and magnetic stirrer bar mixing process to disperse the MWCNTs into the epoxy resin system. The results shown an improves in the mechanical, thermal, and electrical properties with increase volume fraction (0.1 to 2%), and then decreased with further increasing the MWCNTs content but stay higher than of pure epoxy. At (1.5%) we observed enhancement in tensile strength (28.19%, 15.74%) and Young's modulus (35.71%, 30.95%) for L - MWCNTs and S - MWCNTs respectively, and the higher enhancement in flexural modulus and flexural strength due to 2% vol. fraction of L - MWCNTs reached to (71.43 %, 102.26 %). The high impact strength and microhardness values result at (1. 5%L - MWCNTs) reached to (823.996%), and (41,102%) respectively.Better improvement in thermal conductivity and AC conductivity result at 2% volume fraction for both MWCNTs types compare with pure epoxy. The high thermal conductivity values due to L - MWCNT reached to (369.31%) or three times from the thermal conductivity of pure epoxy, compare with the value of enhancement for S - MWCNTs (183.39 %).Investigations of electrical properties of MWNT/polymer show a significant increase of electrical conductivity with the increase of the MWCNTs content. The AC. electrical conductivity of the sample with 2 % vol. fraction L - MWCNTs reached to four orders of magnitude higher than that of the pure polymer at a frequency range of (5E 4 to 5 E6) Hz, its present(9.66E - 7 to 5.78E - 5 Ω/cm) compare with the AC. electricalconductivity for S - MWCNTs ( 6.57 E - 11 to 2.24E - 5 Ω/cm) at same volume fraction and frequency range and with the electrical conductivity of pure epoxy (4.5E - 12 to 6.2E - 9 Ω /cm).Scanning Electron Microscope images illustrate the morphology of tensile fractured surface of EP/MWCNTs composites, although the morphologies of tensile fractured surface show ductile fracture with dispersed stresses in more than one crack propagation. Increased roughness and ductile behavior shown with increased volume fraction of MWCNTs. Above 2% vol. fraction of MWCNTs we shown increase the agglomeration that’s lead to decrease in properties of epoxy composites.

المتحسسات الطبيعية للخلايا الشمسية ذات الصبغات المتحسسة على قواعد اوكسيد الخارصين == Natural Sensitizer for Dye - Sensitized Solar Cells Based on Zinc Oxide

اسم المؤلف: اوراس طارق شاكر
اسم المشرف: صلاح عبد الله حسون | رعد محمد صالح الحداد
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: This thesis focused on the study of dye - sensitized solar cells (DSSCs) based on ZnO nanoparticle as a semiconducting layer with two natural dyes.The present study began by synthesizing ZnO nanoparticles by two methods. The first method ZnO nanoparticles prepared by sol - gel method with (0.1, 0.2, 0.3 M) zinc acetate and then thin films of zinc oxide prepared by using spin coating technique with thickness equal to (109 nm), while the second method technique of ZnO nanoparticles prepared by sol gel method (0.2 M) from zinc acetate was selected as the optimum concentration to make thin film of zinc oxide (In the form of a paste) by using doctor - blade technique with thickness equal to (111nm).The effective mass model for spherical particles (Brus equation) for ZnO nanoparticles were (1.3147, 1.4056, 1.6379 nm) for three concentration.The characteristic of the prepared films on glass substrates have been examined by X - ray diffraction analysis (XRD), UV - Vis spectroscopy, photoluminescence spectrum (PL), scanning electron microscopy (SEM), Atomic Force Microscope (AFM) and Thermo Graviometric Analysis (TGA).In both methods , ZnO films were prepared on transparent conducting oxide (ITO) coated glass then addition of chlorophyll as sensitized dye which extracted from spinach leaves and anthocayanin pigment from pomegrenate juice and they were used as the working electrode (anode) of dye - sensitized solar cell (DSSCs).The absorption spectra of all dyes were performed by UV - Visible spectroscopy which showed that the dye absorbed light in the visible region from (400 nm) for chlorophyll pigment and (510 nm) for anthocyanenpigment.The (I - V) characteristic curves of the fabricated tow cells were measured and studied at constant light intensity. All photovoltaic parameters of the cells were presented. The results revealed that the extract of Pomegranate by using spin coating lead to the highest efficiency (15%).

دراسة تاثير معقداث معدنية على الخواص البصرية والكهربائية وفوق السمعية لاغشية بولي فينيل الكحول وبولي فينيل استيت المحضرة بطريقة الصب == Studying the Effect of Metal Complexes on the Optical, Electrical and Ultrasound Properties of PVA and PVAc Films Prepared by Casting Method

اسم المؤلف: الاء جواد كاظم الكدساوي
اسم المشرف: ندى خضير عباس | مجيد علي حبيب
الموضوع العام: علوم الفيزياء
السنة: 2005
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The present study focused on the modification of the structural, optical and electrical properties and acoustical parameters of poly (vinyl alcohol), poly (vinyl acetate) and polyblend of (poly (vinyl alcohol) + poly (vinyl acetate)) by adding (0, 3, 6 and 9) wt.% of metal complexes, which are : Chloropentaaminecobalt (III) chloride [Co(NH3)5Cl]Cl2 and Potassium Dioxalatocuprate (II) Dihydrate K2[Cu(C2O4)2].2H2O. The mentioned composites films were prepared by solvent casting technique.All samples were structurally investigated by X - ray Diffraction XRD, Fourier transform infrared spectroscopy FTIR, Scanning electron microscope SEM which revealed that there is an association between the polymer matrix and the additive.The optical data at wavelengths range (190 - 800) nm, were analyzed and interpreted in term of the theory of phonon assisted indirect electronic transition. It is observed that energy gap decreases as the metal complexes content increases. The smallest obtained energy gap is 1.86 eV for PVAc / [Co(NH3)5Cl]Cl2 composites films. The refractive index, extinction coefficient, and the dielectric constant increase with increasing the concentration of the additive.The D.C electrical conductivity increases with temperature which exhibited a semiconductor behavior. Also the activation energy values are decreases with increase of additive concentration.The A.C electrical conductivity is increased with increasing applied electrical field frequency (102 to 5*106) Hz and with additive concentration. The dielectric constant and dielectric loss were decrease with increasing the frequency and increase with the concentration of the additive.The acoustical parameters have been measured in frequency range of (25, 30, 35 and 40) KHz. Metal complex enhances the ultrasonic absorption coefficient of polymer matrix. The velocity decreases with increasing metal complex.

دراسة متانة الربط الانتشاري بين السيراميك والمعادن في الحالة الصلبة == Investigation of the Relaibility of Diffusion Bond Strength Between Ceramic - Metals in Solid State

اسم المؤلف: اروى غازي ناجي الطائي
اسم المشرف: زاريه ازات سركيس | ثامر عبد الجبار جمعة
الموضوع العام: علوم الفيزياء
السنة: 2010
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

دراسة الفجوات المصنعة بهيئة عيوب بواسطة الاشعة السينية لمصبوبة المنيوم ومفاصل لحام الفولاذ == X - ray Radiographic Study of Simulated Voids - Like Defects in Aluminum Casting and Welded Joints in Steel

اسم المؤلف: فرقد رشيد سعيد الزبيدي
اسم المشرف: مازن فضيل محروك | ثامر عبد الجبار جمعة
الموضوع العام: علوم الفيزياء
السنة: 2010
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: This project investigates the detection and evaluation of imperfections in internal structures of castings and welded joints by x - ray radiography. Optimum radiography conditions that lead to clear and high contrast image on the radiograph were studied.Equations derived earlier for finding the size and depth of defects in castings were used in this project to test their applicability to a wide range of geometrical parameters used in radiography.The importance of non - destructive testing NDT in industry is discussed. X - ray radiography being one of the NDT techniques, has some privilege over other techniques. For example, welded joints sometimes contain internal flaw or blowholes that may escape detection by other NDT techniques but can not escape detection by x - rays. Two kinds of samples are prepared for radiography. The first sample is aluminum casting through which two different sizes of steel spheres are included. This sample was radiographed from two opposite sides and the x - ray films were analyzed.The second sample is steel plates which are welded by arc welding and then radiographed by x - rays.Imperfections in this sample such as incomplete root penetration, undercut and porosity were detected by x - ray radiography. Different conditions influencing the preparation and radiography of the above samples were studied. The prepared welded sample was radiographed three times for different high voltages (120,140,160) kV respectively with an exposure time of (80) second. The best quality image where the defects can be detected clearly if its size is (5%) of the radiographed object using (120) kV and (140) kV. Moreover the results show that the optimum film gradient was found at (140)kV and the contrast is better than obtained with (120)kV while darkening image was found at (160)kV.In field of the aluminum casting, the two equations were derived earlier proved their capabilities as a right method for identification each of size and depth of such defects in castings and welded joints

دراسة تحضير مادة كاؤلين دويخله كمالات في صناعة الورق == A STUDY OF USING KAOLIN DUEKHLA AS FILLER IN THE PAPER INDUSTRY

اسم المؤلف: علي رزاق عبد الرضا
اسم المشرف: ازهار جواد داوود
الموضوع العام: علوم الفيزياء
السنة: 2006
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يتناول البحث دراسة تاثير خفض نسبة اكاسيد الحديد والتيتانيوم السيليكا الحرة من اطيان كاؤولين دويخله لغرض استخدامها كمالات في صناعه حشوه الورق.لما لهذه المكونات من تاثير على خواص الحشوه. يحتوي خام الكاؤولين المستخدم في هذا البحث على حوالي 1.7% من اوكسيد الحديد و1.2% من اكسيد التيتانيوم و51.16% من اوكسيد السيلكون من ضمنه12% من السيليكا الحرة. ويعتبر وجود هذه النسب من اوكسيد الحديد والتيتانيوم والسيليكا الحره ضمن الخام غير مرغوب في صناعة الورق , لقد اجريت معامله كيميائية لكاؤولين دويخله بهدف تنقيته من الشوائب التي يمكن ان تذوب بحامض الهيدروكلوريك حيث ثم الاستمرار بغسل الكاؤولين بالماء المقطر لتصل درجةpH الى قيمة خمسة . ثم تجفيفه لمدة 3 ساعات بدرجة حرارة من (40 - 60) م0 وبعدها تم طحن المسحوق بالمطحنة البورسلينيه لمدة 5 ساعات. ثم نخل المسحوق بمنخل ذو حجم حبيبي 65 مايكرون ليتم استخدامه في الدراسة. استخدمت في هذا البحث طريقة الترسيب, وقد اعتمد في طريقة الترسيب على فصل الاكاسيد المذ كوره من الاطيان استخدام ماده مشتته هي فوسفات الصوديوم. كما تم دراسة تاثير الماده المشتتة على لزوجة الخليط حيث تبين ان بزيادة الماده المشتته تقل نسبه اللزوجة الى ان تصل الى اقل قيمه. كما تم دراسة تاثير كبريتات الخارصين المائية كماده قاصرة على نموذج المجموعه M4 وباوزان تراوحت( بين10 الى 22 غم) من الماده القاصرة كخطوه ثانيه لتقليل نسبه الشوائب المذكورة والتي بالنتيجة تؤدي الى زيادة نصوعيه كاؤولين دويخله حيث تم ازالة حوالي 73% من اوكسيد الحديد,91% من اكسيد التيتانيوم, 15% من اوكسيد السيلكون, و50% من السيليكا الحرة في نموذج المجموعه G7. النتائج المستحصله تبين كفاءة هذه الطريقة في فصل الشوائب الغير مرغوب فيها اذ انخفضت نسبة اوكسيد الحديد المتبقي في الماده المعالجه (من 1.71% الى0.3%), واكسيد التيتانيوم ( من1.2% الى 0.09%), واوكسيد السيلكون (من 51.16% الى 39.7%). وكون الطريقة المتبعه في الفصل هي طريقة فيزيائيه فلم يلحظ حدوث تغير في خواص الخام بعد المعالجه, مما يمكنا استخدام الخام المعالج بهذه الطريقه في صناعات اخرى. | This study is carried out to investigate the possibility of using Iraqi clay; Duekhla kaolin as filler in the paper industry by reducing the percentage of iron oxide, titanium dioxide, and free silica. Duekhla Kaolin containe about 1.7% iron oxide, 1.2% titanium dioxide, 51.16% silicon dioxide, and 12% free silica. The existence of these oxides in kaolin is undesired in paper - making. The process started by washing Duekhla kaolin with (4N) HCl to remove all the soluble oxides which are not required in paper making. The washed kaolin then separated using filter papers and under a sequence of operations of dilution and filtering until the pH - value become 5. The separated materials then dried at temperature range 40 - 60 °C for 3 hours, and the dried powders then milled using ball mill of porcelain body, with different sizes of spheres, for 5 hours. Finally the powders of Duekhla Kaolin sieved with a sieve of 65 μm. The sedimentation method is used for the separation of the above mentioned oxides from clay by using sodium phosphate as dispersant agent. The viscosity parameter of the mixture was studied under the effect of the dispersant agent, and it was found that with the increasing of added dispersant agent the viscosity decreased to a minimum value which is equal to 0.31dyne.cm2/sec, after that the viscosity increased with the increasing of adding sodium phosphate. The study performed; depending on the minimum viscosity value corresponds to the dispersant amount added. The zinc hydrosulfite was used as a bleaching agent in a second step for removing the undesired impurities which implies to raise the brightness degree of kaolin Duekhla as a result. As a result of these treatment, the undesired oxides are reduced from sample G7 by the following percentages; (73% of iron oxide, 91% of titanium dioxide, 15% of silicon dioxide, and 50% of free silica removed), the results of this study reveals that the oxides percentages decreased from (1.71% to 0.3% in iron oxide, 1.2% to 0.09% in titanium dioxide, and 51.16% to 39.7% in silicon dioxide). The crystal structure of kaolin did not change after these treatments to decrease the percents of impurities in this clay to be used as filler in the paper industry

تاثير الحجم الحبيبي لاسود الكاربون على الخواص الميكانيكية لمتراكبات البيوتادين == Effect of Carbon Black Particles Size on the Mechanical Properties of Butadiene Composites

اسم المؤلف: علي نزال عواد
اسم المشرف: سمير حسن هادي النصراوي
الموضوع العام: علوم الفيزياء
السنة: 2017
الدرجة: دبلوم عالي
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: في هذا البحث دراسة تاثير الحجم الحبيبي لاسود الكاربون (N326 , N375 , N660) على الخواص الميكانيكية ( الصلادة , قوة الشد, الاستطالة , معامل المرونة ,مقاومه التمزق) للمطاط الصناعي BRcis المعروف باسم بونا نظرا لتطبيقاته الواسعة وخاصة في صناعة الاطارات بسبب مقاومته العالية للاحتكاك .حيث تم تحضير وتصنيع عجنات مطاطية تتكون من المطاط الصناعي BRcis كمادة اساس . اما بالنسبة لمواد التقوية او المالئات Fillers فهي اسود الكاربونCarbon black (N326 , N375 , N660) . تضمن البحث تحضير 15 عجنة تكون فيها نسب المطاط الصناعي BRcis في كل عجنة (pphr (100ونسب اسود الكاربون (N326 ,N375 ,N660) كالاتي (0 ,10 ,20 ,30 ,40 ) PPhr لكل نوع من انواع اسود الكاربون.حيث اجريت جميع الفحوصات الميكانيكية كلا حسب ASTM الخاصة بها مثل الصلادة حسب المواصفة ASTM D1415 وكذلك قوة الشد وفقا لمعيار ASTM D412 ومقاومة التمزق باستخدام ASTM D624 واجريت الفحوصات بعد فلكنت العجنات . لقد اظهرت اختبارات الصلادة (Hardness) ان المطاط المدعم باسود الكاربون (N326) اكثر صلادة من النوعين (N375 , N660) . وكذلك اظهرت اختبارات معامل المرونة (Modulus of elasticity) والاستطالة (Elongation ( ان المطاط المدعم باسود الكاربون (N326) يكون اقل مرونة من النوعين (N660 ,N375)

تحضير ودراسة خواص مادة اوكسيد الرصاص النانوية == Preparation and Study of ( PbO ) Nanomaterials Properties

اسم المؤلف: علي فاضل مرموص عبود
اسم المشرف: عبد العزيز عبيد موسى العكيلي
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: في هذا العمل تم تحضير اغشية رقيقة من اوكسيد الرصاص (PbO) باستخدام تقنية الرش الكيميائي الحراري وهي طريقة سهلة ومناسبة للترسيب على مساحات كبيرة. استخدم كلوريد الرصاص المائي PbCl2.2H2O كمصدر للحصول على جسيمات الرصاص. تم انماء مزيج اغشية (PbO) بدرجات حرارة مختلفة °C (200, 250 ,300 , 350, 400 و450) على قواعد زجاجية وقد استخدم غاز النتروجين بضغط (4.5 بار) كغاز حامل . تم فحص التركيب البلوري للاغشية بطريقة حيود الاشعة السينية ( XRD) اوضحت النتائج ان جميع الاغشية المحضرة كانت متعددة التبلور واظهرت النتائج بان الاغشية المرسبة بـ (200 °C ) , ( (250 °C ,( 300°C) , و( 350 °C )كانت بقمة (002) بينما الاغشية المرسبة بـ (400°C و450 °C ) كانت تحمل القمة (112) القمم. في حين اظهرت النتائج وجود تحول من النظام الرباعي القائم الى النظام المعيني القائم فوق (350 °C) . درست طبوغرافية السطح للاغشية المحضرة باستخدام مجهر القوى الذرية (AFM) والمجهر الالكتروني الماسح) SEM) ومبدد الطاقة للاشعة السينية (EDX) . الحجم الحبيبي لجسيمات (PbO) النانوية وجد انه يقل بزيادة درجة حرارة السطح . ام فحص (EDX) اظهر احتواء الاغشية المحظرة على عناصرPb ) وO ) كما هو متوقع ، مشيرا الى تشكيل اغشية(PbO) نقية. الخصائص البصرية للاغشية المحضرة بسمك (177nm) تم دراستها باستخدام قياسات النفاذية البصرية في المنطقة الطيفية (250 - 760 nm) . نتائج النفاذية كانت اكبر من 80% . فجوة الطاقة المباشرة للــ (PbO) كانت ضمن مدى 1.61 - 2.80) eV) ، والتي تتزايد مع زيادة درجة حرارة السطح . الثوابت البصرية كمعامل الانكسار ومعامل الخمود وثوابت العزل تم حسابها لجميع الاغشية المحضرة . الخصائص الكهربائية مثل التوصيلية الكهربائية المستمرة وتاثير هول تم دراستها ايضا . وكانت نتائجها تشير الى ان الاغشية من النوع السالب ( n - type ) وتمتلك طاقتي تنشيط ( Ea1 , وEa2 )، وقد وجد ان التوصيلية الكهربائية المستمرة تزداد مع زيادة درجة حرارة سطح القاعدة. | In this work, thin films of lead oxide (PbO) were prepared by using a homemade chemical spray pyrolysis (CSP) technique, which is a simple, inexpensive and suitable technique for large deposition area. The lead chloride PbCl2.2H2O is used as a source of lead particles. (PbO) thin films with different substrate temperatures (200, 250, 300, 350, 400, and 450) ̊C have been grown on clean glass substrate with the nitrogen carrier gas (4.5 bar).The crystal structures were examined by X - ray diffraction (XRD) analysis. The result shows that all the prepared films are polycrystalline structure. It indicates that the films coated at 200°C, 250°C, 300°C, and 350°C are (002) oriented, while the films deposited at 400 °C and 450 °C are (112) oriented. Above 350 °C, the pure tetragonal nature deteriorated and the peaks corresponding to orthorhombic phase are observed. The surface morphology of the deposits films have been studied by using atomic force microscopy (AFM), scanning electron microscopy (SEM) and energy dispersive X - ray (EDX). The grain size of the (PbO) nanocrystalline observed at the surface decreases with increasing of substrate temperature, leads to increase in the surface roughness. (EDX) shows that all the films contain the elements (Pb and O) as expected, indicating formation of the (PbO) films with high purity. The optical properties of the films, which are prepared with thickness of (177 nm), have been determined by using the optical transmittance measurements in the spectral region from (250 - 750) nm. Transmittance results is upper than 80%. Direct energy gap for (PbO) is in the range (1.61 - 2.80)eV, it increases with increasing substrate temperature. The optical constants such as refractive index, extinction coefficient and dielectric constant have been calculated for all preparing films. The electrical properties include D.C conductivity and Hall effect are studied. The results show that the prepared films are n - type, and have two activation energies (Ea1 and Ea2). It is found that the electrical D.C conductivity increased with the increase of substrate temperature.

دراسة الخصائص لفيرايت النيكل المطعم بالكوبلت والكروم == Studying The Properties of Co And Cr Doped Nickel Ferrite

اسم المؤلف: هند محمد حسن
اسم المشرف: فرح طارق محمد نوري
الموضوع العام: علوم الفيزياء
السنة: 2014
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The crystalline structure analysis, electrical and dielectric properties of ferrite with the general formula Ni1 - xCoxFe2O4 where (x=0.0,0.1,0.3,0.5,0.7 and 0.9) and for Ni0.3Cr0.7Fe2O4 prepared by standard ceramic technique for bulk and deposited (using

دراسة تاثير الحجم البلوري في خواص اوكسيد الكالسيوم المحضر بالتفكك الحراري == A Study of The Effect of Crystallite Size In Cao Properties Prepared By Thermal Decomposition

اسم المؤلف: امل دشر حسين الربيعي
اسم المشرف: عباس فاضل عيسى | ستار عبود عباس
الموضوع العام: علوم الفيزياء
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: واسط
الصفحات الاولى:
المستخلص: تم تحضير اوكسيد الكالسيوم السيراميكي بطريقة التفكك الحراري لكاربونات الكالسيوم وهيدروكسيد الكالسيوم عند درجات حرارة وازمان مختلفة والتي تم تشخيصها بطريقة حيود الاشعة السينية والتحليل التفاضلي والوزني. تمت دراسة التنوع في الحجم البلوري والانفعال لاؤكسيد | The CaO ceramic powders have been prepared from thermal decomposition of two reactants, calcium carbonate CaCO3 and calcium hydroxide Ca(OH)2 at different decomposition temperatures and time which have been characterized by X - ray diffraction method, DTA

دراسة تاثير اشعة كاما على الخواص التركيبية والكهربائية للبولي انيلين المحضر مختبريا == Study the Effect of Gamma Radiation on the Structural and Electrical Properties of Prepared Polyaniline

اسم المؤلف: زهراء عبد الامير حسين المظفر
اسم المشرف: سلمى محمد حسن
الموضوع العام: علوم الفيزياء
السنة: 2014
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

استخلاص مسحوق الالومينا طور ـ من الكاؤولين العراقي ودراسته == The Investigation Of The ? - Alumina Powder Extracted From Iraqi Kaolin

اسم المؤلف: ايوب صابر كريم
اسم المشرف: فاضل عبد رسن | طارق عبد الرضا الظاهر
الموضوع العام: علوم الفيزياء
السنة: 2006
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

خواص ترانزستور تاثير المجال ذو البوابة المعزولة (ترانزستور الاغشية الرقيقة) == Characteristics of Insulated Cate Field Effect Thin Film Transistor ( TFT)

اسم المؤلف: اسماعيل خلف عباس
اسم المشرف: مصطفى عرب محمد | يحيى نوري الجمال
الموضوع العام: علوم الفيزياء
السنة: 1999
الدرجة: دكتوراه
الجامعة: جامعة الموصل
اللغة: الانكليزية
مكان الجامعة: الموصل