عرض: 25 50 75 100 النتائج

نتائج البحث: 25 من أصل 49,311

دراسة بعض الخواص الفيزيائية للايبوكسي المدعم بدقائق نانوية STUDY OF SOME PHYSICAL PROPERTIES OF EPOXY REINFORCE WITH NANO PARTICLES

المستخلص: تم استخدام مادة الايبوكسي (EP) مع نسب خلط حجمية مختلفة (1, 2, 3, 4, 5, 7, 10, 15 و20%) من الجسيمات الزركونيا ( 2(ZrO والمغنيسا ( MgO) النانوية ومن الجسيمات 2 ZrO وMgO المايكروية لتحضير متراكبات الايبوكسي النانوية ومتراكبات الايبوكسي المايكروية لفحص ودراسة بعض من خصائصها الميكانيكية (متانة الانحناءومعامل الانحناء ومتانة الكسر وقوة الصدمة والصلادة ) والخواص الكهربائية العزلية ( ثابت العزل الكهربائي وزاوية ظل الفقد والتوصيلية الكهربائية) والخواص الحرارية (التوصلية الحرارية ودرجة الانتقال الزجاجي)طريقة تحضير عينات الايبوكسي وعينات متراكبات الايبوكسي النانوية وعينات متراكبات الايبوكسي المايكروية تضمنت مراحل الخلط الميكانيكي ومجانس خلط الامواج فوق الصوتية واستخدام منظومة التفريغ. تم استخدام فحص الانحناء ذي النقاط الثلاث وفحص وقوة الصدمة وفحص الصلادة وفحص السعة الكهربائية العزلية وفحص الماسح التفاضلي السعوي الحراري وفحص مجهر المسح الالكتروني وفحص التوصيل الحراري لفحص عينات الايبوكسي ومتراكباتة النانوية والمايكروية وقد اظهرت النتائج التي تم الحصول عليها من فحص متانة الانحناء ذي النقاط الثلاث زيادة تدعيم الخصائص الميكانيكية لمتراكبات الايبوكسي الزركونيا النانوية ,ان نسبة 2% من الخلط تؤدي الى اعلى نسبة تدعيم لا متانة الانحناء بلغت 52% اما معامل الانحناء فتضاعف مرتين عند هذه النسبة وايضزاادة متانة الكسر لتصل الى 86% مقارنة مع نتائج عينة الايبوكسي واما قوة الصدمة فقد بلغت 51% وارتفعت صلادة المادة 5% نسبة التدعيم 2% . وقد ظهر الكسر اللدن بشكل واضح في بعض منحنيات الاجهاد - الانفعال في متراكبات الايبوكسي زركونيا.كما اظهرت الخصائص الميكانيكية لمتراكبات الايبوكسي مغنيسيا النانوية زيادة تدعيمها بزيادة نسب الخلط الحجمية لجسيمات المغنيسيا النانوي في التراكيز القليلة (< 5%) حيث اظهرت النسبة 4% من MgO اانانوية اعلى قيمة لقوة الانحناء حيث ازدادة بنسبة 47% مقارنة EP) ) في حين معامل الانحناء ارتفع بنسبة 74% مقارنة EP) ) في حين متانة الكسر لمتراكبات الايبوكسي مغنيسيا النانوية فتضاعفت بحدود اربع مرات عن الايبوكسي وقد بلغت قوة الصدمة 65% عند نسبة التدعيم وارتفعت صلادة المادة 3% مقارنة EP) ) لوحده. وقد ظهر الكسر اللدن بشكل واضح في منحنيات الاجهاد - الانفعال في متراكبات الايبوكسي مغنيسيا..الخصائص الميكانيكية لمتراكبات الايبوكسي زركونيا المايكروية ومتراكبات الايبوكسي مغنيسيا المايكروية اظهر انخفاض في خصائصها الميكانيكية بارتفاع نسب الخلط الحجمي للجسيمات المايكروية للزركونيا وللمغنيسيا ما عدا معامل الثني فقد زاد بارتفاع نسب الخلط الحجمي لجسيمات الزركونيا والمغنيسيا المايكروي.وهذا يظهر تفوق الجسيمات النانوية عن الاخرى المايكروية حيث اضافتها بنسب ضئيلة تؤدي الى تحسين ملحوظ في الصفات الميكانكية والتي يتم تفسيرها عن طريق الصور الماخوذة عن مجهر الماسح الالكتروني والتي اظهرت البنية التركيبة لسطح الكسر لمتراكبات الايبوكسي زركونيا النانوية ولمتراكبات الايبوكسي مغنيسيا النانوية بوجود شقوق نانوية عند نسب خلط حجمية معينة ,وقد بينت صور الكسر انتهاء اغلب الشقوق من التركيب بسب وجود الاضافات لجسيمات الزركونيا والمغنيسيا النانوية فكانت اقل ما يمكن في نسب2 % من نسب الخلط الحجمي لجسيمات الزركونيا النانوي وعند 4% من نسب خلط حجمي لجسيمات المغنيسيا النانوي. وهذا معزز من النتائج العملية التي حصلنا عليها عند هذه النسب الضئيلة الاضافة واثرها في تحسين الصفات الميكانيكية للايبوكسي.ان الخصائص الكهربائية العزلية لمتراكبات الايبوكسي زركونيا النانوية ولمتراكبات الايبوكسي مغنيسيا النانوية اظهرت زيادة تدعيم ثابت العزل الكهربائي عند نسب الخلط الحجمية الواطئة لجسيمات الزركونيا والمغنيسيا النانوية في حين في نسب الخلط العالية (> 10%) بداء ثابت العزل الكهربائي لمتراكب الايبوكسي مغنيسيا الناوني بالارتفاع عن اعلى نسبة تحسن في حين ثابت العزل الكهربائي لمتراكب الايبوكسي زركونيا بالانخفاض. في حين ان زاوية ظل الفقد لمتراكب الايبوكسي زركونيا النانوي تزداد زيادة طفيفة بزيادة نسب الخلط الحجمي لجسيمات الزركونيا النانوي في حين زاوية ظل الفقد لمتراكب الايبوكسي مغنيسيا النانوي تقل بنسب قليلة بزيادة نسب الخلط الحجمي لجسيمات المغنيسيا النانوي.التوصيل الحراري لمتراكبات الايبوكسي زركونيا النانوية ولمتراكبات الايبوكسي مغنيسيا النانوية لها نفس السلوك نسب خلط حجمية مختلفة (1, 2, 3, 4, 5, 7, 10, 15 و20%) ان التوصيل الحراري لكلا المتراكبتين (لمتراكب الايبوكسي زركونيا النانوي ولمتراكب الايبوكسي مغنيسيا النانوي) يزداد بزيادة نسب الخلط الحجمية لجسيمات زركونيا ومغنيسيا النانوية. تمتلك المتراكبات النانوية توصيل حراري اقل من المتراكبات المايكروية. اما المتراكبات النانوية فقد امتلك متركبت الزركونيا قيما اعلى للتوصيل الحراري مقارنة بمتراكبة المغنيسيا. | Epoxy with various mix ratio of concentration 1, 2, 3, 4, 5, 7, 10, 15 and 20% of ZrO2, MgO nanoparticles and ZrO2, MgO microparticles were used to prepare epoxy microcomposites and epoxy nanocomposites in order to study the several mechanical properties (flexural strength, flexural modulus , fracture toughness, impact strength and hardness) and electrical properties (dielectrical constant , dissipation factor and thermal conductivity) and thermal properties (thermal conductivity and Tg).The molding process was used to prepare epoxy and their nanocomposite and microcomposite samples using, ultrasonic homogenizer and shearing mixer. Three point bending examine, impact strength examine, hardness shore D examine, The LCR meter examine, Scanning Electron Microscope (SEM) examine and Differential Scanning Calorimeter (DSC) were used also.The results where obtained to form 3 - point bending examine illustrated that the mechanical properties of EP/ ZrO2 nanocomposites were increased with increasing concentration of ZrO2 nanoparticles. The ratio of about 2% vol. fraction lead to Maximum improvement in flexural strength was 52%. flexural modulus improvement was doubled at this ratio of vol. fraction, fracture toughness is improved about 86% at 2% vol. fraction, impact strength is improved about 51% at 2% vol. fraction , while hardness is improved about 5% at 2% vol. fraction comparing with results of epoxy sample. Ductile behavior appears in some stress - strain curves of obtained for EP/ ZrO2 nanocomposites. The mechanical properties of EP/ MgO nanocomposites were increased with increasing concentration of MgO nanoparticles at low volume fractions (˂ 5%) of MgO nanoparticles. Flexural strength improved 47% at 4% vol. fraction. Flexural modulus is improvement about 74% at 4% vol. fraction, fracture toughness is rise about four times at 4% vol. fraction. impact strength is improved about 65% at 4% vol. fraction, while hardness is improved about 3% at 4% vol. fraction . Ductile behavior almost appears in stress - strain curves of EP/ MgO nanocomposites. The mechanical properties for epoxy ZrO2/ MgO microcomposites reduce with increasing concentration of ZrO2/ MgO microparticles. this show nanoparticles overcome for others microparticles; thus addition quit small amounts .lead to particularly improvement in mechanical properties ,which can be explain through the pictures . Scanning Electron Microscope (SEM) pictures show the topography of fractured structure of EP/ ZrO2 nanocomposites and EP/ MgO nanocomposites with nanocracks of the epoxy structure at some of volume fractions of ZrO2/ MgO nanoparticles, while the topography of fractured structure show the nanocracks almost vanish from the structure because of adding ZrO2/ MgO nanoparticles was at minimum value at 2% vol. fraction of ZrO2 nanoparticles and 4% vol. fraction of MgO nanoparticles . this enhance by experimental results which we got it in the small raito addition .their influence to improve mechanical properties of epoxy. Dielectrical properties of EP/ ZrO2 nanocomposites and EP/ MgO nanocomposites show; Dielectric constant improved at low volume fraction of ZrO2/ MgO nanoparticles, while at higher concentration (> 10%) Dielectric constant of EP/ MgO nanocomposites stile increased and Dielectric constant begin to reduce in EP/ ZrO2 nanocomposites. Tan delta of EP/ ZrO2 nanocomposites little increase with increasing volume fraction ZrO2 nanoparticles, while Tan delta of EP/ MgO nanocomposites begin to reduce with increasing volume fraction of MgO nanoparticles.Thermal conductivity for EP/ ZrO2 nanocomposites and EP/ MgO nanocomposites have the same behavior with 1, 2, 3, 4, 5, 7, 10, and 15% vol. fraction. thermal conductivity of both EP/ ZrO2 nanocomposites and EP/ MgO nanocomposites increase with increasing the volume fraction. EP/ MgO nanocomposites and EP/ MgO nanocomposites have thermal conductivity lower than from EP/ MgO microcomposites and EP/ MgO microcomposites
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: دكتوراه
الموضوع الدقيق: الفيزياء
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: وداد حمدي جاسم
اسم المؤلف: صفاء عبد صالح

تحضير ودراسة مفرق هجين من مادة (CuInTe2) Preparation and Study Heterojunction From CuInTe2 Material

المستخلص: حضرت سبيكة CuInTe2(CIT) بطريقة التبخير الحراري في الفراغ بعد ها تم تحضير اغشية هذه المادة على قواعد من الزجاج بدرجات حرارة تلدين K((673,473 وسمك nm(900,600,300).تم فحص تركيب كل من سبيكة واغشية CIT المحضرة بظروف مختلفة بواسطة تقانة حيود الاشعة السينية .XRD وقد اظهرت نتائج حيود الاشعة السينية ان السبيكة وجميع الاغشية الملدنة عند درجة حرارة تلدين K(673 and 473) كانت تمتلك تركيبا متعدد التبلور من النظام الرباعي (Tetragonal) بالاتجاه البلوري السائد (112)، في حين كانت الاغشية المحضرة في درجة حرارة الغرفة (300)K ذات تركيب عشوائي. اما دراسة خصائص سطح اغشية CIT بواسطة مجهر القوة الذرية AFM فقد بينت زيادة الحجم الحبيبي مع زيادة كل من درجة حرارة التلدين والسمك.واظهرت القياسات البصرية لاغشية CIT انها تمتلك فجوة طاقة مباشرة، اذ تزداد فجوة الطاقة بزيادة درجة حرارة التلدين لجميع الاغشية المحضرة، وكذلك تم حساب النفاذية والثوابت البصرية مثل معامل الانكسار ومعامل الخمود وثابت العزل بجزئيه حقيقي والخيالي ضمن مدى الاطوال الموجيةnm (600 - 2700) .واظهرت نتائج الخصائص الكهربائية للاغشية المحضرة على قواعد الزجاج ان التوصيلية الكهربائية المستمرة D.C كانت تمتلك حاملات شحنة من النوع الموجب، وانها تزداد مع زيادة درجة حرارة التلدين لجميع الاغشية المحضرة في حين كانت تقل مع زيادة السمك .وان لهذه الاغشية طاقتي تنشيط، اي انها تملك اليتين للانتقال الالكتروني.كما بينت ايضا نتائج تاثير هول ان الاغشية كانت تمتلك حاملات شحنة من النوع (p - type).في هذا البحث ايضا تم تصنيع خلايا شمسية من ترسيب اغشية CITعلى قواعد سليكونية مكونة من المفارق الهجينةSi/CIT) ) الملدنة بدرجات حرارة وسمـــك مختلفة، واخرى على قواعد مكونة من زجاجFTO , ITO للمفارق الهجينة ITO/ CdS/ CIT)) و(FTO/CdS/CIT)، وكذلك ITO/ZnO/CdS/CIT)) و(FTO/ ZnO/CdS/CIT) المرسبة بطريقة التبخير الحراري . تم قياس سعة الانحياز العكسي كدالة لفولتية الانحياز عند التردد الافضل 10)KHz) وبينت هذه النتائج ان المفارق من النوع الحاد، كما قلت السعة بزيادة جهد الانحياز العكسي وهبوط جهد البناء الداخلي بزيادة درجة حرارة التلدين .واظهرت دراسة خواص (تيار - جهد) في حالة الاضاءة للمفارق الهجينة المحضرة بان افضل مفرق لتصنيع خلية شمسية على القواعد السليكونية كان للمفرق المحضر بسمك 600)nm (بدرجة حرارة تلدين (673)K. اذ بلغت الكفاءة التحويلية (%1.8) وعند طلاء هذه الخلية بطبقة مضادة للانعكاس من مادة TiO2 بسمك 600)nm) ازدادت الكفاءة لتصل الى (2.4%). | CuInTe2 (CIT) alloy prepared by thermal evaporation technique then prepared thin film from this alloy on glass substrate of different thickness (300,600 and 900 ±20)nm and at different annealing temperature (473 and 673)K.The structure of the alloy and CIT films which prepared at different deposition condition are examined using x - ray diffraction (XRD) technique.XRD analysis show that the alloy and the films prepared at (473 and 673)K have polycrystalline structure of tetragonal type with preferred orientation[112],while films prepared at R.T(300)K show amorphous structure. CIT films morphology were studied using AFM techniques, the results show that increase in grain size with increase thickness and annealing temperature .The optical measurement show that CIT films have a direct energy gap and it increase the increasing annealing temperature ,the transmittance and optical constant such as refractive index ,extinction coefficient and the dielectric constant with both part real and imaginary within the wavelengths in the range (600 - 2700)nm were calculated too.Electrical properties results for films prepared on glass substrate as a function of thickness and annealing temperature show that the electrical conductivity D.C were p - type and it with increasing annealing temperature while it decrease with increasing thickness, all films have two activation energies with two mechanisms of transport of free carriers .Hall effect results show that all films were p - type.In this research, fabrication solar cells from deposition CIT films with different thickness and different annealing temperature on silicon substrate (Si/CIT) heterojunction and another deposition on FTO,ITO substrate to fabricated solar cell from (ITO/CdS/CIT) ,) FTO/CdS/CIT) heterojunction and (ITO/ZnO/CdS/CIT) , (FTO/ZnO/CdS/CIT) heterojunction by using thermal evaporation technique.The C - V measurements as a function of reverse bias voltage at frequency (10KHz) show that the heterojunctions are abrupt type, the capacitance decrease as reverse bias voltage increase and the value of built - in potential decrease with increasing annealing temperature. The current - voltage characterization study for heterojunction prepared under illumination shows that the solar cell which have optimum condition deposition on silicon substrate with the thickness 600nm at annealing temperature 673K, have best efficiency (1.8%) among other cells, and after coating this cell by antireflection coating (TiO2) with thickness (600)nm, the value of efficiency increase to(2.4%)
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: العربية
الدرجة: دكتوراه
الموضوع الدقيق: الفيزياء
السنة: 2017
الموضوع العام: علوم الفيزياء
اسم المشرف: بشرى كاظم حسون الميالي فلاح ابراهيم مصطفى العطار
اسم المؤلف: شيماء قاسم عبد الحسن

التركيب المورفولوجي والخواص البصرية لاغشية In2O3 الرقيقة Morphology Structural and Optical Properties of In2O3 Thin Films

المستخلص: يتناول هذا البحث دراسة تاثير تغير زمن الاكسدة ودرجة حرارة التلدين على الخصائص التركيبية والبصرية لاغشية اوكسيد الانديوم الثلاثي (In2O3) الرقيقة التي تم تحضيرها بتقنية التبخير الحراري في الفراغ ، حيث تم ترسيب معدن الانديوم (In) على قواعد من الزجاج واخرى من السليكون بدرجة حرارة الغرفة (300 K) وبسمك (400 ± 10 nm) وبمعدل ترسيب 5.47 ± 0.5 nm/sec)) ، ومن ثم اكسدة اغشية (In) المحضرة حراريا بدرجة حرارة (673 K) وبوجود الهواء وبزمن مختلف (ساعة ، ساعة ونصف ، ساعتان) ، بعد ذلك تم اجراء التلدين بدرجات حرارة مختلفة K (323 , 373 , 423) على اغشية (In2O3) المؤكسدة بزمن ساعة واحدة باعتبار ان هذا الزمن هو افضل زمن اكسدة من ناحية قيم فجوة الطاقة البصرية والحجم الحبيبي والخشونة ومعدل الخشونة . درست الخصائص التركيبية للاغشية المحضرة (قبل التلدين وبعده) عن طريق تقنية حيود الاشعة السينية (XRD) التي اظهرت ان هذه الاغشية ذات تركيب بلوري متعدد ومن نوع مكعب ، وكذلك تم استخدام مجهر القوة الذرية (AFM) والمجهر الالكتروني الماسح (SEM) لدراسة طوبوغرافية السطح من ناحية التجانس والخشونة ومعدل الخشونة . درست الخصائص البصرية للاغشية المحضرة (قبل التلدين وبعده) باستخدام المطياف البصري (Optical Spectrometer) ، حيث تم حساب فجوة الطاقة البصرية والتي كانت ذات قيمة اقل عند زمن اكسدة ساعة وعند درجة تلدين (323 K) ، بالاضافة الى دراسة طيف كل من الامتصاصية والنفاذية والانعكاسية ، وايضا تم حساب الثوابت البصرية وهي : معامل الامتصاص ، معامل الانكسار ، معامل الخمود ، ثابت العزل بجزئيه الحقيقي والخيالي كدالة لطاقة الفوتون ، وقد بينت النتائج ان زيادة قيم هذه الثوابت متعلقة بزيادة زمن الاكسدة ودرجة حرارة التلدين. | This research examines the effect of changing time of oxidation and the degree of annealing temperature on the structural and optical properties of membranes dioxide triple indium (In2O3 thin) that was prepared technology thermal evaporation in a vacuum, where the deposition of metal indium (In) on the glass and silicon substrate at room temperature (300 K) and thickness (400 ± 10 nm) and the rate of deposition of (5.47 ± 0.5 nm / sec) , and then oxidation films (In) prepared thermally and the presence of air at a different (hour, hour and a half, two hours) , then annealing was performed at different temperatures (323, 373, 423) K films (In2O3) oxidizing a time of one hour, considering that this time is the best time of antioxidants in terms of optical energy gap and grain size and roughness values and the rate of roughness . Structural properties of prepared films have been studied (before and after annealing) by X - ray diffraction technique (XRD) which showed that these films with the structure of crystalline multi it cubic type, as well as the use of an atomic force microscope (AFM) and electron microscopy scanner (SEM) to study the topography of the surface in terms of homogeneity and roughness and the rate of roughness . Optical properties of prepared films have been studied (before and after annealing) using the optical spectrometer, where the optical energy gap , and which were less valuable when oxidation hour time account and at a temperature annealing (323 K) , in addition to the study of spectrum both absorbance and transmittance and reflectivity , and was also the optical constants account : the absorption coefficient, refractive index, extinction coefficient, dielectric constant real and imaginary as a function of photon energy, the results have been shown to increase the values of these constants related to increased oxidation time and the annealing temperature.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: العربية
الدرجة: ماجستير
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: علية عبد المحسن شهاب
اسم المؤلف: شيماء احمد كاظم

تصميم وتقييم طلاء المضاد للانعكاس غـير المسـتقطـب Design and Evaluation of Non - Polarizing Antireflection Coating

المستخلص: لقد تم اجراء دراسة نظرية ووضع نموذج رياضي يعتمد في بناءه على المصفوفة المميزة المعدلة لتصميم طلاء مضاد للانعكاس لايتاثر بالاستقطاب ودراسة تاثير زوايا السقوط المائل . حيث توصلنا الى بنى تصاميم مثلى لطلاءات مضادة للانعكاس غير مستقطبة ولزوايا سقوط مختلفة للطيف الكهرومغناطيسي باستخدام مواد متجانسة موحدة الخواص مهملة الامتصاص ضمن منطقتي الضوء المرئي (300 - 800)nm وتحت الحمراء المتوسطة (3000 - 5000)nm وباستخدام الزجاج والسليكون كمواد اساس على التوالي.وفقا لاجراءات تحقق الامثلية فان النتائج اشارت الى امكانية التغلب على الصعوبات التي تظهر نتيجة السقوط المائل للطيف والتي من ابرزها ظاهرة الفصل (Splitting) لموجة الضوء المنعكسة الى مستويين P, S (نتيجة لظاهرة الاستقطاب) وايضا الازاحة الجانبية لمنحنيي الانعكاسية RS,RP باتجاه الاطوال الموجية القصيرة واللاتناظر بين المنحـنيين .وقد اظهرت التصاميم مقدرة عالية في تقليل انعكاسية الزجاج (ضمن منطقة الطيف المرئي) والسليكون (ضمن منطقة تحت الحمراء المتوسطة ) وتحقيق ادنى انعكاسية عند طول موجة التصميم المقترحة ولمدى واسع من زوايا السقوط. كما اوضحت النتائج امكانية التوصل الى تصميم طلاء مضاد للانعكاس غير مستقطب واسع الحزمة عند زوايا سقوط عالية تصل الى 60o وبعدد طبقات قليلة في المنطقة المرئية, فضلا عن التوصل الى تصميم طلاء مضاد للانعكاسية غير مستقطب عند اطوال موجية مختلفة عند 80o في المنطقة الحمراء | In this current study a mathematical model was put on to design anti - reflection coatings at oblique incidence of light for visible region (300 - 800 )nm and mid infrared region (MWIR) (3000 - 5000)nm .successfully we achieved designs with optimal performance at high angles of incidence where the results refer to overcome significant problems of design at oblique incidence .the main problem that we were able to overcome, is the splitting of the incident light into two modes of wave S and P - polarization where the separation of reflection performance for both S - and P - polarized wave expands when incidence angle increases. We managed to obtain designs of non - polarized antireflection coatings those that have the same reflection for both S - and P - polarizations at specified angles. results refer to designs of non - polarized antireflection coatings without splitting at high incidence angles. We accomplished designs of non - polarized antireflection coatings that provide low reflection within the Intended range of wavelengths where we could to limit the effect of the high incidence angles that increase the reflectance of the chosen substrates.Also the problem of shifting of reflection performance toward shorter wavelengths due to the oblique incidence of light was resolved and designs of optimal performance of non - polarized antireflection coatings with low reflection at high incidence angles was achieved.It has been provided a promising coating materials system for use in design of non - polarizing antireflection coatings at different incidence angles for the concerned wavelengths regions
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: العربية
الدرجة: ماجستير
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: الاء نزار عبد الغفار
اسم المؤلف: سارة عامـر ســــلمان

دراسة تاثير خطوط الضغط العالي على تراكيز غاز الرادون في الهواء باستعمال كاشف الاثر النووي CR - 39 Study of The Effect of High Voltage Power Lines on Radon Concentrations in Air Using Solid State Nuclear Track Detector CR - 39

المستخلص: يتضمن الهدف من البحث دراسة تاثير خطوط الضغط العالي 132kV)و400kV ) في مناطق منتخبة من مدينة بغداد على تراكيز الرادون ونواتج انحلاله باستعمال كاشف الاثر النووي CR - 39. تم توزيع عدد من الكواشف بابعاد (2x1cm²) ولمدة شهر كامل داخل وخارج محطتي بوب الشام 400kV والوزيرية 132kV , كذلك في عدد من الدور السكنية القريبة من خطوط الضغط العالي 132kV ومحطة المعري 132kV القريبة من منطقة العدل ببغداد خلال فصل الخريف. تم تحديد تراكيز الرادون خلال المقارنة مع العينات القياسية، ومن خلال النتائج المستحصلة كانت قيمة المعدل الموزون لتراكيز الرادون داخل الابنية تحت تاثير خطوط الضغط العالي 400kVهي 91.77±0.1122Bq/m³)) وفي الخارج كانت مساوية الى (125.73± o.117 Bq/m³) وتحت تاثير خطوط الضغط العالي 132kV في الداخل كانت مساوية الى 60.03± 0.266 Bq/m³)) اما في الابنية البعيدة عن خطوط الضغط العالي فقد كانت مساوية الى Bq/m³) 23.265± 0.77) وفي خارج الابنية 13.63± 0.99 Bq/m³)) يتضح خلال نتائج الدراسة ارتفاع تراكيز غاز الرادون في المناطق القريبة من خطوط الضغط العالي وبشكل ملحوظ مقارنة مع المناطق البعيدة عن الخطوط مما يدل على ان هناك تاثيرا واضحا لخطوط الضغط العالي على تراكيز غاز الرادون ويزداد هذا التاثير بزيادة شدة المجال الكهرومغناطيسي والقرب من هذه الخطوط, كما كان لخطوط 400kV تاثير اقوى من خطوط 132kV على تراكيز الرادون في الهواء, اما تراكيز غاز الرادون داخل الابنية فكانت اعلى من تراكيزه خارج الابنية , وهذه الزيادة في التركيز تعود الى ان جدران الابنية تعد المصدر الرئيس لتوليد الرادون داخل الابنية , حيث تبين ان مواد البناء قد ادت دورا مهما في زيادة تراكيز غاز الرادون داخل الابنية بالاضافة الى عمر الابنية والارتفاع عن مستوى سطح الارض . | The aim of this research the study of the effect of high Voltage power lines (400kVand132kV) upon radon concentration and its decay results by using nuclear track detectors CR - 39 inside Baghdad city. A number of detectors with the dimensions (2x1cm2) was scattered for a whole month indoor and outdoor Bob Al - sham station 400kV and Al - waziriya station 132kV as well as in number of the houses which are very close from the high voltage power lines 132kV and Al - maary 132kV during autumn. The concentrations of radon were determined through the comparison with the standard samples , The results shows that the value of Weighted Average of radon concentration indoor the buildings which are under the effect of high voltage 400kV is (91.77 ± 0.117Bq/m3) and under the effect of high voltage lines 132kV indoor is equal to (60.03±0.266Bq/m3) ,As for the buildings which are far away from the high voltage lines , it was equal to (23.2651± 0.773Bq/m3) and outdoor the buildings (13.63±0.99 Bq/m3) . The results showed that increase of radon concentration in the areas which are close to high voltage power lines compared with areas which are far away from the lines which show that there is a clear effect of high voltage power lines upon the concentration of radon . And this influence increases with increase of the intensity of electromagnetic field as well as the near distance with these lines .For there was a stronger effect of 400kV lines than 132kV lines upon radon concentration in air, Also the concentration of radon gas indoor the building were higher from its concentration outdoor the building . And this increase in concentration is due to the fact that the walls of the buildings are considered to be the main source for generating radon indoor the building as well
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: العربية
الدرجة: ماجستير
السنة: 2009
الموضوع العام: علوم الفيزياء
اسم المشرف: خالد هادي مهدي العبيدي ندى فاضل توفيق
اسم المؤلف: زينة جميل رحيم عبد علي

تصميم وتصنيع الطلاء المضاد للانعكاس معتمدين طريقة الليزر النبضي في الترسيب DESIGN AND FABRICATION OF ANTI REFLECTION COATING BY PULSED LASER DEPOSITION

المستخلص: في هذا العمل تم تصميم طلاء المضاد للانعكاس بسمك ربع ولاربع طول موجي ودراسة خصائص بصرية للاغشية الرقيقة والاستفادة منهما في تصنيع طلاء مضاد للانعكاس ضمن المنطقة المرئية والحمراء القريبة . اعتمد تصميم الطلاء على مفهومين اساسيين هما نظرية المصفوفة المميزة وتصميم طلاء بسمك ليس ربع طول موجي ولحالة السقوط العمودي للضوء.اخذين بنظر الاعتبار ظاهرة التشتت. تم دراسة نفاذية وانعكاسية الطلاء كدالة للتغير في الطول الموجي للضوء الساقط باستخدام الرزمة البرمجية MATLAB. اوضحت نتائج التصميم امكانية الحصول على انعكاسية واطئة لمدى واسع من الطيف الكهرومغناطسي يشمل المنطقة المرئية ومنطقة الحمراء القريبة عندما يكون السمك البصري ضمن المدى اقل 0.7L لمادة MgF2 المرسبة على الزجاج ويكافي الاسماك الهندسية للغشاء (34.5,36.91,78.3) نانومتر, وامكانية الحصول على انعكاسية واطئة لمدى واسع في درجة حرارة التلدين عند سمك البصري 1.2L ويكافى السمك الهندسي ((141.6 نانومتر. تكتسب هذه النتيجة اهميتها في امكانية تخمين السمك الامثل قبل البدء بمرحلة التحضير حيث اشارت النتائج الى معادلة تجريبية تربط بين عدد النبضات وسمك الغشاء. لغرض تصنيع الطلاءالبصري, تم استخدام طريقة الترسيب بالليزر النبضي لليزر النيديميوم - ياك1064 نانومتر الذي يعامل بتقنية التولد المتوافق الثاني بطول موجي 532 نانومتر والذي يعمل بتقنية عامل النوعية بمعدل تكرارية (1 - 6) هرتز وامد نبضة 10 نانوثانية. لتحضير اغشية فلوريد المغنيسيوم المرسبة على الزجاج, قمنا بدراسة ظروف التحضير التي تتضمن التغير بعدد النبضات (150و250 و350و 450 نبضة) لترسيب اغشية فلوريد المغنيسيوم ومدى تاثيرهم على سمك الاغشية المحضرة وتركيبها وحجم الحبيبات وبالتالي على نفاذيته ومدى امكانية استخدامه كطلاء مضاد للانعكاس. لقياس سمك الاغشية المحضرة, تم استخدام جهاز مقياس اللبسومتر وتم استخدام جهاز المطياف لايجاد النفاذية والانعكاسية والثوابت البصرية ومعاملي الانكسار والتوهين (n, k) وعلى التوالي. اوضحت النتائج بان الطلاء المضاد للانعكاس المحضر من طبقة واحدة يمتلك نفاذية عالية وانعكاسية واطئة تشمل منطقتين من الطيف المرئية والحمراء القريبة وان معامل الانكسار يتراوح بين (1.05 - 1.25( في حين كانت اسماك الاغشية المحضره تتراوح بين )34.5 - 141.6 ) نانومتر, كذلك اوضحت صور (AFM) بان الحجم الحبيبي يتراوح ضمن المدى (86.55 - 94.81) نانومتر. | In this work design and fabricated antireflection coating (AR’C) with single layer. Design of the AR’C was based on the characteristic matrix method with quarter and non - quarter optical thickness. The effect of deposited material at normal incident of light was taken into account and the reflection performance was computed with the aid of MATLAB over the visible and near infrared region. Results show that wideband AR’C was achieved when deposited thin film of MgF2 on glass with non - quarter optical thickness less 0.7L related to geometrical thickness (34.5,36.9,78.3 nm) at room temperature. Also wideband AR’C achieved with non quarter 1.2L optical thickness deposited related to geometrical thickness (141.6nm) at annealing temperature. However results accept significant importance to estimate the optimum thickness before preparation stage. In this study antireflection coating fabricated by using pulsed laser deposition technique (PLD) which deposit MgF2film on glass substrate. Q - switching Nd : YAG laser beam with second harmonic generation (SHG) technique of wavelength 1064 nm and 532 nm, repetition rate 1 - 6 Hz and the pulse duration 10 ns was used. The film thickness, structural behavior and grain size dependent on that prepared conditions which include variation number of shot (150,250,350,450 pulses) have been studied.The thicknesses of MgF2 nanostructure films were measured using Lipsometre. Further, the experimental results shows high transmittance, wideband low reflection and the refractive index within the range (1.05 - 1.25), while the thicknesses are (34.5 - 141.6 nm). Atomic force microscope (AFM) image illustrate that the grain size of the film within the range (86.55 - 94.81) nm
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: الاء نزار عبد الغفار كاظم عبد الواحد عادم
اسم المؤلف: زينب حازم عبد الرحيم

الخواص التركيبية والبصرية والكهربائية لاغشية اوكسيد النيكل المحضرة بطريقة الترذيذ كمتحسس غازي The structural, optical and electrical properties of NiO films prepared by RF - Sputtering as gas sensor

المستخلص: The structural, optical, electrical, and gas sensing properties of nickel oxide have been studied. The structural properties of the deposited films were made using XRD, SEM and AFM. The NiO films have been prepared with different thicknesses (100, 150 and 200) nm on glass, Si and Al2O3 substrates, using RF - sputtering at 100°C substrate temperature. The electrical and optical parameters of the NiO films were characterized using Hall Effect and transmittance measurements.The X - ray diffraction result indicates that the films are of polycrystalline in nature with cubic structure. The grain size of the nanoparticales observed at the surface depended of films thicknesses, where 200 nm has smallest average grain size 85.5 nm and RMS increased with increasing of thicknesses.The optical characterization shows that the film has band gap that ranged in between 3.6 eV to 3.9 eV, the average transmittance of films was found to be ranged of 60% to 85% in the VIS - IR regions. The dark conductivity of NiO films has been studied as a function of film thickness, crystal structure transformation and temperature with particular regard to gas sensitivity in CO2, NO2, CO, NO and the ethanol vapor. The electrical properties were found to be dependent on the film thickness.I - V characteristics for NiO films at (air, vacuum, N2, O2andCO2) gases before and after annealing were investigation. It would appear from our result that the diminution of the dark conductivity after annealing may be due to the surface contaminations adsorbed on the surface of the NiO film during film preparation or from ordinary atmospheric air.The resistivity of the NiO thin films decreased with increasing of thicknesses, from 1.5x105 to 5.4x104 (Ω.cm), which is related to the increase of carrier concentration with film thickness. The results of measurements of NiO thin films show that these films have good conductivities and results obtained from Hall Effect indicate that the NiO films were (p - type).It was found that the sensitivity to other gases differs for different film thicknesses and working temperature. Furthermore, NiO films exhibits high and fast response to NO2 gas at 200°C, which makes it a promising candidate for a poisonous gas sensing.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: دكتوراه
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: قاسم عزيز محمد محمد عبد النبي
اسم المؤلف: زينب طارق عبد الحميد

تراكيز النويدات الطبيعية والصناعية في نماذج بيئية مختلفة لمدينة العمارة - محافظة ميسان Natural and Artificial Radionuclide Concentrations for different Environmental Samples in AL - Amara city - Missan Governorate

المستخلص: الهدف من هذه الدراسة يتضمن جزئين الجزء الاول يتمثل بتقييم مستوى النشاط الاشعاعي الطبيعي والصناعي للعينات البيئية (تربة سطحية ,ومياه نهر دجلة , ومياه محطات التصفية ,ورواسب نهر دجلة) التي جمعت من مواقع مختلفة في مدينة العمارة - محافظة ميسان باستعمال تقنية مطيافية اشعة كاما مع كاشف الجرمانيوم عالي النقاوة (HPGe) ذي الكفاءة 40% وقدرة تحليل 1.8keV للطاقة 1.33MeV العائدة لنويدة الكوبلت - 60 وذلك لقياس الفعالية النوعية لليورانيوم - 238والثوريوم - 232 والبوتاسيوم - 40 والسيزيوم - 137 للوقوف على المستويات الاشعاعية, فضلا عن حساب مؤثرات الخطورة الاشعاعية لاشعة كاما (فعالية الراديوم المكافئة (Raeq),ومعدل الجرعة الممتصة في الهواء(Dɣ),والجرعة الفعالة السنوية للتعرض الخارجي (〖AEDE 〗_out) والداخلي (〖AEDE 〗_in),ودليل الخطورة الخارجي(Hex) والداخلي (Hin),ودليل الخطورة لاشعة كاما I_γ))) في النماذج البيئية المذكورة انفا.وقد بينت نتائج الدراسة الحالية ان معدلات الفعالية النوعية لليورانيوم - 238 والثوريوم - 232 والبوتاسيوم - 40 والسيزيوم - 137 ومعدلات مؤثرات الخطورة الاشعاعية لاشعة كاما في العينات البيئية كانت جميعها اقل من الحد المقبول به عالميا.اما الجزء الثاني من هذه الدراسة هو قياس تراكيز غاز الرادون في العينات البيئية (تربة سطحية ,ومياه نهر دجلة ,ومياه محطات التصفية ,ورواسب نهر دجلة ,وهباء الهواء) التي جمعت من مواقع مختلفة في مدينة العمارة - محافظة ميسان ,وذلك باستعمال تقنية كواشف الاثر النووي للحالة الصلبة نوع (CR - 39),فضلا عن حساب مؤثرات الخطورة الاشعاعية لغاز الرادون (محتوى الراديوم الفعال (CRa) ,و معدل الانبعاث الكتلي للرادون (EX(M)) ,و معدل الانبعاث السطحي للرادون (EX(S)) ,و مؤشر الفا (Iα) ,والرادون المذاب Cd)) ,و الجرعة الفعالة السنوية للرادون AEDw))) في النماذج البيئية المذكورة انفا.و بينت نتائج الدراسة الحالية ان معدلات تركيز الرادون - 222 في العينات البيئية كانت جميعها اقل من الحد المقبول به عالميا.يستنتج من هذه الدراسة ان بيئة مدينة العمارة هي ضمن الخلفية الاشعاعية الطبيعية . | The aim of this study includes two parts, the first part is to assessment level of natural and artificial radioactivity of environmental samples (surface soil, water of the Tigris River ,water filtering stations and sediments of the Tigris River) collected from various locations in AL - Amara city - Missan government using gamma - ray spectroscopy technique with High purity Germanium detector (HPGe) which has a photo peak relative efficiency of( ≥40 % ) and an energy resolution of (≤1.8 keV) for the 133 MeV gamma transition of 60Co to measure Specific activity concentration of 238U, 232Th, 40K and 137Cs, Also Evaluation of radiological hazard effects for Gamma ray (Radium Equivalent Activity (Raeq), Absorbed Dose Rate in Air (Dɣ), Annual effective dose outdoor (〖AEDE 〗_out) and Annual effective dose indoor(〖AEDE 〗_in), Hazard index outdoor )Hex( and Hazard index indoor) Hin (and gamma Index (I_γ)) In environmental samples listed above.The results of the present study have shown that the rates of Specific activity of 238U, 232Th, 40K and 137Cs and radiological hazard effects Rate for Gamma ray in environmental samples were all lower than the value of the global limit.The second part of this study is to measure the concentrations of radon gas in environmental samples (surface soil , water of the Tigris River, filtering water stations , sediments of the Tigris River and dust air) which collected from various locations in AL - Amara city - Missan government using Solid State Nuclear Track Detectors type (CR - 39), In addition to Evaluation of radiological hazard effects for Radon gas (Effective radium content (CRa), Mass exhalation rate for Radon ????????(????), Surface exhalation rate for Radon ????x(????), Alpha index (Iα), Radon dissolved )Cd) and Annual effective dose )AEDw)) In environmental samples listed above.The results of the present study have shown that the rates of radon - 222 concentration in environmental samples were all less than the global limit.We conclude from this study that the environment of Amara city is within normal background radiation.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: دكتوراه
الموضوع الدقيق: فيزياء التلوث البيئي
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: خالد هادي مهدي العبيدي
اسم المؤلف: زهراء عبد الحسين اسماعيل السوداني

تصنيع ودراسة خواص معدن - فثالوسيانين العضويه كمتحسس حرارة Fabrication and Study Properties of Organic Metal - Phthalocyanine as Temperature Sensor

المستخلص: Copper Phthalocyanine tetrasulfonic acid tetrasodium salt (CuPcTs) thin films with different annealing temperatures (100, 150 and 200)oC have been prepared by spin coating technique on glass & ITO substrate with speed rate of 1000 rpm for 1 min, the obtain films have 100±5 nm thickness. This dissertation deals with different measurement techniques (Thermal, Structure, Morphological, Optical and Electrical measurements) in order to investigate the optimum condition to fabricate sensor device.The structures of CuPcTs thin films which deposited on glass substrate have been studied by X - ray diffraction (XRD), Atomic Force Microscope (AFM) and (FESEM) techniques, XRD studies show that thin films have polycrystalline structure for all annealing emperatures with perfect orientation (001). Also the surface morphology by AFM measurement for CuPcTs thin films has been studied; it shows that all films after heat treatment go to Nano size. The roughness decreases with increasing temperatures, and by (EDX) technique the elemental ratios of thin films are determined.The optical measurement showed that the as - deposited and annealed films have two peaks which are (B, Q1and Q2) bands, B in Ultra Violet region attributed to transition between d level for Cu metal and π* in LUMO, and Q bands in Visible region attributed to the transition between π(HOMO) - π* (LUMO). These measurements demonstrated that the energy gap of CuPcTs depends on the annealing temperatures, the photoluminescence spectra (PL) showed the traps inside energy gap play an important role and effect onoptical behavior. It’s studied to confirm the results of optical band gap, FTIR spectra give results about the bonds of (CuPcTs) and its position compared with H2Pc as a reference. The electrical properties of these films were studied with differentannealing temperature. Hall measurements showed by increasing thin films temperature the conductivity decreased at 100oC then it increase at 150oC finally it returned to decrease that may be due to phase transitions, all the films are p - type.CuPcTs Capacitive - Resistive surface type temperature device sensor has been fabricated by using two electrodes (Aluminum and Silver), the capacitive response of this sensor was observed by Raising the temperature gradually.Capacitive - Resistive temperature sensor showed that the response to variation of temperature in range (RT - 200)0C and the response time ≈ 20±5 Sec. for two electrodes, The fabricated sensor appear enough sensitivity and good response and recovery times and strong affected by frequency variation.Practical experience has shown results that aluminum electrode has capacitance and resistance higher than the silver electrode depending on the different frequencies values, while the silver electrode has the shortest response time.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: ندى خضير عباس
اسم المؤلف: رؤى مثنى علي

تقييم المقاطع العرضية لليورانيوم للتفاعلات المستحثة بالنيوترون Cross Sections Evaluation of Uranium for Neutron Induced Reactions

المستخلص: لقد تم في هذا البحث حساب قيم المقاطع العرضية لنظائر اليورانيوم (A=230 - 238) للتفاعلات المستحثة بالنيوترونات التالية ,,,(n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), (n,γ), (n,p), (n,t), (n,d), (n,α), (n,2α),and (n,2p)المقاسة بفترات مختلفة من الطاقة حيث ان هذه القراءات تم اخذها من الوكالة الدولية للطاقة الذرية (IAEA ) ومن المكتبات المشهورة عالميا مثل EXFOR, CINDA, ENDF, JEFF, JENDL,ROSFOND,CENDL,WIND, TENDL, BROND, IRDF, EAF وقد تم قياسها في الفترة الاولى من منتصف القرن الماضي وحتى اخر سنوات الماضية .لقد تم تحليل المديات الكاملة للطاقة لكل تفاعل وقد تم اعادة حساب وتقييم المقاطع العرضية ضمن فترات صغيرة مختلفة حسب مديات الطاقة للنيوترون القاصف مع الاخطاء المرافقة لها. قد تم وضع صيغ رياضية لمتعددة الحدود في معظم التفاعلات والتي تربط بين تغيير المقطع العرضي مع الطاقة والتي يمكن استخدامها للتنبىء بقيم المقاطع العرضية غير المحسوبة. لقد تم حساب قيمة Q - للتفاعل وطاقة الربط وطاقة العتبة وفرق الكتلة وعامل الرص لكل تفاعل ولكل عنصر هدف. ان التقييمات اعتمدت بشكل رئيسي على حسابات نموذج الجهد البصري لقد اعتمدت الحسابات على معاملات الجهد البصري النووي حيث تم اختيار وجمع المعلومات من مكتبة (RIPL) التابعة للوكالة الدولية للطاقة الذرية. لقد قمنا بدراسة صيغتين مختلفتين لنموذج الجهد البصري حيث ان الصيغة الاولى تسمى نموذج الجهد البصري القياسي والمعاملات ماخوذة من مكتبة Beijing والصيغة الثانية لنموذج الجهد البصري قد تم حسابها بتحديد ثلاث مديات طاقية. لقد قمنا بدراسة نسبة التفاعل (n,f) لكل نظير من نظائر اليورانيوم نسبة الى يورانيوم - 235 والذي يعتبر نموذج قياسي. لقد قمنا بحساب هذه النسبة لجميع التفاعلات المتوفرة لدينا وليس فقط تفاعل الانشطار واحتسبناها نسبة الى يورانيوم - 235.حساب اخر تم اضافته الى هذه الدراسة وهو دراسة تاثير التلوث لوليدة اليورانيوم - 237 والتي هي نبتونيوم - 237 بعمر نصفي 6.8 يوم وكذلك حساب الفيض النيوتروني لكل منهما. | The cross sections of Uranium isotopes (A=230 - 238) for the (n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), (n,γ), (n,p), (n,t), (n,d), (n,α), (n,2α),and (n,2p) reactions are calculated with different energy intervals which are collected from International Atomic Energy Agency (IAEA). The available cross sections data for the reactions mentioned above are collected from the well known international libraries like EXFOR, CINDA, ENDF, JEFF, JENDL, ROSFOND, CENDL, WIND, TENDL, BROND, IRDF, EAF and measured during the period from the middle of the last century up to several years ago.The cross sections are reproduced in fine steps of incident neutron energy in different intervals with the corresponding errors. The recommended cross sections for all available experimental data have been calculated for all considered reactions mathematical representative equations for all these reactions are formulated. These equations represent the variation of the cross section with energy, which could be used to predict the values of uncalculated cross sections.Q - value, threshold energy, binding energy, mass excess, and packing fraction for each reaction and target element have been also calculated.The evaluations are based mainly on the calculations of the optical model potential. The calculations are based on the nuclear optical potential, where the relevant parameters are collected and selected from Reference Input Parameter Library (RIPL) which is being developed under the international project coordinated by the International Atomic Energy Agency (IAEA). We study two different formula for optical model potential the first formula is the standard optical potential model and its parameters are taken from Beijing library. The second formula is the optical potential with different energy ranges. We study the ratio of the (n,f) cross sections for each Uranium isotopes relative to (n,f) cross section for U - 235 which could be considered as a standard sample. We have done the ratio not for the (n,f) cross sections only but also for other reactions like ,(n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), and (n,γ) relative to U - 235 reactions cross sections.Another evaluation is added to cross sections is the effect of the contamination of the daughter of U - 237 which the daughter is Np - 237 6.8day and their relative flux
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
الموضوع الدقيق: الفيزياء
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: ايمان طارق العلوي
اسم المؤلف: روناك اكرام علي

دراسة تاثير المعاملة الحرارية على الخواص التركيبية والميكانيكية لبوليمر (بولي تيترافلورواثيلين) Study the Effect of Heat Treatment on the Structural and Mechanical Properties for poly (tetrafluoroethylene

المستخلص: درس في هذا العمل نوعين من بولي تيترافلورواثيلين ( النقيين ولكن باختلاف الشركة المصنعة PTFE) (صيني _اماراتي ) بطريقه صب المحلول كافلام رقيقه واشرطة , بواسطه الخواص التركيبيه (حيود الاشعه السينيه ومسعريه المسح التفاضلي ) والخصائص الميكانيكية بدلاله درجات حراره مختلفة للدوره الحرارية . يبين كلا النوعين تغير في الشده المستطاره من المستوى القاعدي (100) عند تغير درجه حرارة الدورة الحرارية واظهر النوعين زيادة في التبلورية مع زياة درجة الحرارة .كذلك اختلاف في الانثالبي عند اختلاف درجات الحرارة حيث لوحظ زياة الانثالبي بزيادة درجة الحرارة واختلاف في الخصائص الميكانيكيه ( الاجهاد والانفعال عند نقطة الخضوع ونقطه الكسر ومعامل يونك) للبوليمر حيث اظهرت المعالجة الحرارية للبوليمر بدرجات حرارة مختلفة من اجل معرفة خصائصه ومقاومته الى الظروف البيئية ان الخواص الميكانيكية تزداد زيادة خطيا مع زيادة درجة الحرارة .لوحظ بان انتاج الشركه المصنعة الصينية افضل من ناحية النتائج لايجاد درجة التبلورية والخصائص الميكانيكيه عن انتاج الشركة المصنعة الاماراتية لنفس المادة البوليمرية | In this study two modifications of pure polytetrafluoroethylene (PTFE) [C2F4]n. China_UAE source prepared from solution cast as film and strip have been studied by structural (X - ray diffraction (XRD), Differential Scanning Calorimetry (DSC)) and mechanical properties .subjected to different temperature heating cycle. Both modifications show variation in the scattered X - ray intensity of the basal plane (100) as the temperature of heating cycle is changed and show increasing in crystallinity with the increase of temperature .Moreover, the Enthalpy of each kind is changed with difference of heat treatment where the enthalpy increase with the increase of temperature, and two modifications show different in mechanical properties for PTFE (young's modulus, stress at break, stress at yield, elongation at yield. And elongation at break) when the temperature is change ,The heat treatment of polymer to different temperatures in order to know its properties and resistance to environmental conditions results showed that the mechanical properties increase linearly with the increase of temperature.It seems that the product company of china is better than the product company of UAE in degree of crystallinity and mechanical properties for this polymer.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: مي عبد الستار محمد نجيب
اسم المؤلف: رند باسم لطفي الكرخي

الدراسه النظريه لتصميم ماكنه بؤره البلازما وتحقيق العوامل المختلفه التي تؤثر على حصيله النيترون المنبعث Theoretical study to design plasma focus machine and investigate various parameters that affect its emitted neutron yield

المستخلص: في هذا البحث تم تصميم جهاز بؤرة البلازما الكثيفة نظريا بالاعتماد على موديل (لـــي) بناءا المعادلات الرياضية لنموذج لي لكل من هندسة القطبين وعناصر الدائرة الخارجية التي تضم متسعة ومحاثة ومقاومة (RLC). وبعد اجراء الحسابات اللازمة تم ادخال نتائج التصميم في برنامج لرؤية مدى امكانية تشغيله نظريا من خلال دراسة المعلمات المختلفة التي يوفرها البرنامج وبالتالي التعرف على ظروف تشغيله والعوامل المؤثرة عليه. لقد اختير غار الديترويوم كغاز عامل في هذه المنظومة للحصول على ناتج نيتروني من اجل التفاعل النووي الاندماجي. وتم اختبار ودراسة المنظومة عند ضغطين مختلفين (3و4 تور) حيث درست مختلف معلماتها التي يوفرها البرنامج ونوقشت وقورنت النتائج بالاشكال البيانية. اضافة لذلك تمت مقارنة المنظومة المصممة مع منظومة قياسية تناظرها من حيث التركيب النظري وهي منظومة NX2 التي بنيت اساسا للحصول على الاشعة السينية باستعمال غازات النبيلة. اختير في البحث ان يكون غاز الديتريوم هو الغاز العامل للحصول على ناتج نيتروني من اجل المقارنة، حيث درست جميع معلمات التشغيل للمنظومة المصممة مع القياسية بالرسوم البيانية.لقد وجد من خلال انجاز الحسابات اللازمة بان الشكل البياني لانحدار تيار الانبوب الكلي (dip) مباشرة بعد قمة التيار مع الزمن للمنظومة المصممة متفق تماما مع الشكل العام المميز لمنظومات بؤرة البلازما التجريبية دلالة على ان حسابات التصميم صالحة لهذه المنظومة وبالتالي يمكن اجراء الحسابات. ان تصرف فولتية الانبوب مع الزمن للمنظومة المصصمة كان بنفس الشاكله مع المنظومة القياسية. وينطبق هذا على سلوك المعلمات الاخرى بين المنظومتين مثل السرعة والمسار المحوريان والمسار الى الداخل للصدمة الشعاعية ومسار وسرعة استطالة القرص ومسار وسرعة الصدمة المنعكسة شعاعيا وغيرها.تم دراسة ومقارنة تغيرات درجة حرارة البلازما مع الزمن للمنظومتين عند نفس الضغط ولضغطان مختلفان للمنظومة المصممة وكان تصرف ماكنتا بؤرة البلازما بنفس الطريقة. وتم حساب الخسائر المتولدة من الماكنتان مثل خسائر جول وبرمنشتهالنك واعادة الاتحاد وخسائر الطاقة الشعاع الخطي مع الزمن. اخيرا وجد ان المنظومة المصممة ( 1.66 × neutron per shot ) توفر ناتج نيتروني اكبر من المنظومة القياسية (5.15 × neutron per shot) . لقد تصرفت المنظومة المصممة مثل المنظومة القياسية لكن كان الاختلاف في سلوك المنظومة المصممة والقياسية هو اختلاف الترتيب الهندسي للمنظومتين من حيث هندسة الاقطاب واختلاف قيم العناصر الكهربائية للدائرة الخارجية. ان المنظومة المصممة نظريا في هذا البحث يمكن ان تكون مشروع لبناء ماكنة بؤرة بلازما تطبيقية للحصول على ناتجها النيتروني العالي للاستفادة منه في اجراء تفاعل الاندماج النووي.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
الموضوع الدقيق: فيزياء البلازما
السنة: 2014
الموضوع العام: علوم الفيزياء
اسم المشرف: مصطفى كامل جاسم رعد حميد مجيد
اسم المؤلف: رنا عيســـى بــك مــــراد

تصنيع ودراسة خصائص كاشف المفرق الهجين Cdo/ Si المشاب والمحضر بطريقة الرش الكيميائي الحراري Fabrication &Characterization Heterojunction Photodetector of Cdo/ Si by Spray Pyrolysis Technique

المستخلص: تم في هذا البحث تصنيع ودراسة خصائص كاشف المفرق الهجين نوع CdO/p - Si المشوب اذ حضرت اغشية اوكسيد الكادميوم(CdO) بطريقة الرش الكيميائي الحراري وبدرجة حرارة قاعدة ثابتة 380o C) ) وبالتراكيز المولارية M(0.1, 0.15, 0.2, 0.25) وشوبت بعنصري النحاس والالمنيوم بنسب (0.5%, 1%, 3%, 5%) على الزجاج وعلى شرائح من السليكون احادية التبلور (Single Crystal) من نوع p - type ذات اتجاهية بلورية (100) ومقاومية كهربائية (2 - 20 Ω.cm) ومن نوع n - type ذات اتجاهية بلورية(100) ومقاومية كهربائية (10 Ω.cm) وسمك يتراوح بين (400 - 600 nm) .ودرست الخواص التركيبية والطوبوغرافية والبصرية والكهربائية لغشاء CdO بتغير التركيز المولاري وبثبوت درجة حرارة القاعدة (Ts) لقد اوضحت نتائج حيود الاشعة السينية ان اغشية CdO ذات تركيب بلوري مكعب وان اعلى شدة كانت عند المستوي (111) , اوضحت النتائج البصرية ان قيم فجوة الطاقة تعتمد بشكل كبير على التركيز المولاري اذ وجدت ان قيم فجوة الطاقة لغشاء CdO النقي كانت تتراوح مابين 2.61 eV الى 2.34 eV ولوحظ ان فجوة الطاقة تبدا بالنقصان مع زيادة التشويب بالالمنيوم والنحاس مقارنة مع اغشية CdO النقية . حيث ان فجوة الطاقة عند التشويب بالنحاس كانت تتراوح مابين 2.5 eVالى 2.31 eV وتتراوح مابين 2.62 eV الى 2.48 eV عند التشويب بالالمنيوم.اوضحت نتائج قياس تيار - جهد للكاشف الضوئي ان مقدار عامل المثالية (Ideality factor) للكواشف المحضرة بمولارية وتراكيز اشابة مختلفة يزداد مع زيادة التركيز المولاري وان افضل قيمة له كانت بحدود 1.7 عند تركيز 0.5% وبالنسبة لشوائب النحاس وبحدود 1.8 بالنسبة لشوائب الالمنيوم بتركيز 0.5% .اظهرت نتائج قياسات الاستجابية الطيفية ان الكواشف المصنعة تعمل ضمن المنطقة الطيفية (400 - 850nm) ووجود قمتين لكاشف (CdO/Si) المشوب وغير المشوب الاولى تقع عند الطول الموجي (550 nm) والتي تعود الى غشاء CdO والثانية عند الطول الموجي (800 nm) والتي تعود الى السليكون. لقد اوضحت نتائج الاستجابية الطيفية للضوء الابيض ان الكواشف تمتلك خصائص خطية جيدة ولاوجود لمنطقة اشباع وان هذه الخصائص تحسنت بعد الاشابة.تم حساب الكشفية النوعية للكواشف المصنعة ووجد انها تتغير مع ظروف التحضير حيث ان اعلى قيمة لها كانت بحدود 6*1011(HZ1/2.W - 1.cm) عند الطول الموجي 500nm وبلغت 7*1011(HZ1/2.W - 1.cm) عند الطول الموجي 700nm للكاشف المصنع CdO : Al/Si المشوب بتركيز 5% . | We discussed in this research Manufacturing and study the detector hybrid retail properties type CdO/ P - Si the doping ,If film were prepared the Cadmium Oxide (CdO), by the way chemical spraying with tempratuer the constant base (380oC) And molar concentrations (0.1, 0.15,0.2,0.25)M. It was the doping for two element Copper and Aluminum with percentages (0.5%, 1%, 3%, 5%) on the glass and the slides of Silicon crystallization single from p - type With crystalline directional (100) and Electrical resistivity (2 - 20 Ω .cm) and from N - type With crystalline directional (100) and Electrical resistivity (10 Ω .cm) at thickness between (400 - 600 nm).We study the Characteristics Synthetic and Optical and Electrical the film CdO , by change molar concentrations with tempratuer the constant base (Ts) , I have explained the results X - ray diffraction that film CdO With a cubic crystalline structure And that the highest intensity was at the level of (111), The results showed of optical that value Energy gap the large dependent on molar concentrations , It was found the value Energy gap they were between (2.34 ev - 2.61 ev) and It was found simpel change in Energy gap when the doping by Copper they were between (2.31 ev - 2,51 ev) and Improving Energy gap when the doping by Alminum they were between (2.48 ev - 2.62 ev).The results measure Current - Potential the optical detector there Ideality factor the detector Prepared with tempratuer the constant base and different molar concentrations where the value increases with molar concentrations decreases, and the better value they were limited 1.7 when concentration 0.5% for Impurities Copper , And limited 1.8 for Impurities Alminum when concentration 0.5%.The result measure Responsive spectral the detector Manufacture the work with in Spectral region (400 - 850 nm) , And found two value the detector (CdO/ Si) the doping and undoping , The first located when wevelength (550 nm ), which return to the detector CdO , The second when wevelength (800 nm ), which return to the detector Silicon. It was found the value Specifc Detectvity the showed the better value they were the detector CdO : Al/ Si the doping concentration 5% it was about 6*1011(HZ1/2.W - 1.cm) at the Wavelength (500nm) and 7*1011(HZ1/2.W - 1.cm) at the Wavelength (700nm).I have explained the results Responsive spectral for white light that the detector has liner properties and this properties improving after at dopend.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: العربية
الجامعة: جامعة بغداد
الدرجة: ماجستير
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: سعاد غفوري خليل العاني رائد عبد الوهاب اسماعيل
اسم المؤلف: رفل صالح ساجت فياض

دراسة الخواص البصرية والكهربائية لمتراكبات PMMA/ اكسيد المعادن Study the Optical and Electrical Properties of PMMA/Metal Oxide Composites

المستخلص: يهدف هذا البحث الى تحضير متراكبات ثلاثية هجينة من PMMA مقواة بجسيمات TiO2 - Al2O3 وZrO2 بتقنية الصب .تم استخدام كسور وزنية (84 - 92) wt % من بولي ميثيل ميثا اكريلك ونسبة ثابتة % (4) من تيتانيا مع نسب وزنية تتراوح بين wt % (4 - 12) للالومينا والزركونيوم. تم دراسة المواصفات التركيبية من خلال حيود الاشعة السينية ومجهر القوة الذرية. بينت فحوصات صور مجهر القوة الذرية تجانس في البناء البلوري. اما الخواص العزلية فقد فحصت من خلال قياس ثابت العزل عند مدى تردد (102 - 106) Hz وبينت النتائج ظهور تاثير طفيف عند اضافة الالومينا للمتراكب الهجيني (PMMA - TiO2 - Al2O3) مقارنة بمضاف الزركونيوم للمتراكب الهجيني (PMMA - TiO2 - ZrO2) حيث قيم ثابت العزل تزداد مع زيادة التركيز (3.408500 - 10.69851). في حين يتناقص عامل الفقد بزيادة التردد للمتراكبات (PMMA - TiO2 - Al2O3)و(PMMA - TiO2 - ZrO2) . قيست التوصيلية الكهربائية المستمرة لمدى درجات حرارية تتراوح بين ( 313 - 373 )K ولوحظت زيادة في القيم التوصيلية بزيادة التركيز ودرجة الحرارة (5.5E - 10 - 8.52E - 10) (Ω.m) - 1 في حالة الزركونيوم المضاف للمتراكب الهجيني. تم حساب الثوابت البصرية للعينات المحضرة كدالة للطول الموجي وذلك باستخدام مطياف بمدى nm( - 1100200). حيث تم حساب معامل الامتصاص، معامل الخمود، معامل الانكسار وفجوة الطاقة البصرية, ومن حساب النتائج نلاحظ ان قيم معامل الامتصاص ومعامل الخمود ومعامل الانكسار لل(PMMA - TiO2 - Al2O3) اعلى من (PMMA - TiO2 - ZrO2) كدالة للطول الموجي، نلاحظ ايضا، انخفاض في قيم فجوة الطاقة البصرية المسموحة eV (2.90 - 2.50) في متراكبات الالومينا بينما من (2.90 - 2.58) eV للزركونيوم. وكذالك فجوة الطاقة البصرية الممنوعة (2.85 - 2.48) eV الكترون فولت للالومينا بينما eV (2.85 - 2.52) للزركونوم . | This study aims to synthesize ternary hybrid composites PMMA polymer matrix with TiO2, Al2O3 and ZrO2 as additives using casting technique. the weight fractions of matrix with range (84 - 92) wt %, fixed percentage (4) % of TiO2 and range of weight fractions with range (4 - 12) wt % of Al2O3 and ZrO2 were used as started materials. Characterization properties were examined through XRD and AFM. Obtained micrograph and XRD revealed homogeneity structure for Al2O3 filler. Dielectric properties such as dielectric constant were carried for range (102 - 106) Hz frequency .The addition of Alumina filler exibits slightly effect on dielectric constant values for prepared ternary hybrid composite (PMMA - TiO2 - Al2O3 ) compared with ZrO2 for ternary hybrid composite (PMMA - TiO2 - ZrO2) where dielectric constant increases as concentration increases (3.408500 - 10.69851) . Dissipation factor decreases with increasing frequency in composite (PMMA - TiO2 - Al2O3) and (PMMA - TiO2 - ZrO2). DC electrical conductivity was conducted in temperature range ( 313 - 373 )K. Markedly increasing for the DC electrical conductivity of Zirconia filler with respect to additional concentration (5.5E - 10 - 8.52E - 10) (Ω.m) - 1 .Otherwise DC electrical conductivity increases versus applied temperature for both prepared composites. Optical constants (extinction coefficient, absorption coefficient, and Index of refraction), optical energy gap were obtained for prepared Specimens as function of wavelength using spectrometer at range (200 - 1100)nm. It was noticed that the values of extinction coefficient ,coefficient of absorption , and refractive index for (PMMA - TiO2 - Al2O3) are higher from that of (PMMA - TiO2 - ZrO2) as wavelength, also, more decreasing in allowed optical energy gap values from (2.90 - 2.50 eV) for Al2O3 filler and from (2.90 - 2.58 eV) for ZrO2 as additive. Also forbidden optical energy gap decreases in case Al2O3 from(2.85 - 2.48) eV while from (2.85 - 2.52) for ZrO2 as additive.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: رغد صبحي الخفاجي
اسم المؤلف: رسل طه حسين

دراسة التركيب المتهيج للنوى زوجية - زوجية ذات العدد الذري Z= 50, 48, 46 في المستوى المتهيج الاول Study of Excited Structure for Even - Even Nuclides of Z = 50, 48, 46 in The First Excited State

المستخلص: درست الخواص الكهرومغناطيسية للنظائر زوجية - زوجية للنوى 48Cd , 50Sn و46Pd الغنية بالنيوترونات من خلال قوى الانتقال لرباعي القطب الكهربائي |M(E2)|2 W.u ↓ واحتمالية الانتقال المختزل B(E2)W.u ↓ لانتقال اشعة كاما من المستوى المتهيج الاول الى المستوى الارضي. حيث تم حساب قوى الانتقال لرباعي القطب الكهربائي |M(E2)|2 W.u ↓ بالاستعانة بمعدل العمر للمستوى المتهيج الاول والشدة النسبية لاشعة كاما المنبعثة من ذلك المستوى, بينما قيم احتمالية الانتقال المختزل B(E2)W.u ↓ استخرجت من خلال عمر النصف للمستوى المتهيج الاول المصحح لمعامل التحول الداخلي.وللحصول على قيمة دقيقة لانتقال رباعي القطب الكهربائي ↓ E2, تم حساب ورسم القيم المتبناة لكل من |M(E2)|2 W.u ↓ وB(E2)W.u ↓ كدالة لعدد النيوترونات.في هذا البحث, تم تحويل القيم المتبناة لانتقال ↓E2 الى قيم احتمالية الانتقال المختزل B(E2) ↑ e2b2 والتي افادتنا في دراسة تركيب النوى من حيث الاختلاف في الشكل لان عامل التشوه β تم استخراجه من B(E2) ↑ e2b2, كما ان دراسة تاثير عدد النيوترونات على سلوك كل من B(E2) ↑ e2b2 وβ في المتسلسلات الايزوتونية لنوى 48Cd , 50Sn و46Pd يعطي معلومات جيدة حول التشوه في النوى.تركزت دراستنا على ثلاث انواع مختلفة من النوى, الاول بعدد ذري سحري50 , والثاني بعدد ذري شبه سحري 48, والثالث بعدد ذري بين القشرات المغلقة 46.في نهاية العمل الحالي تم عمل مقارنة جيدة للحسابات الحالية لقيم احتمالية الانتقال المختزل B(E2) ↑ e2b2 وعامل التشوه β مع معظم القيم العملية والنظرية الحديثة. | Electromagnetic properties for even - even nuclides in neutron - rich nuclei such 50Sn, 48Cd and 46Pd have been studied through the electric quadruple transition strength |M(E2)|2 W.u ↓ and the reduced transition probability B(E2)W.u ↓for γ0 - transition from first excited state to the ground state. The electric quadruple transition strength |M(E2)|2 W.u ↓ is calculated by using life - time for excited state with the intensity of γ0 - transition, while B(E2)W.u ↓ is extracted from half - life time to state corrected for internal conversion coefficient. To obtain precise value for the transition of E2↓, the adopted value for |M(E2)|2 W.u ↓ and B(E2)W.u ↓ was calculated and plotted as a function for neutron number. In present work, the adopted values for the transition of E2↓ are converted to B(E2)exp ↑ e2b2 which helped us to study the structure for nucleus, such as the variation in shape, because the deformation parameter β is extracted from B(E2) ↑ e2b2 and the study for behavior of each of B(E2) ↑ e2b2 and β versus neutron number in isotonic chains to 50Sn, 48Cd and 46Pd gives good information about the deformation in nuclei. Our study focused on the three different types of nuclei, the first with atomic magic number 50, the second with semi - magic atomic number 48 and the third nucleus with atomic number between closed shells 46. At the end of the present work, the good comparisons for the present calculation to the values of the B(E2) ↑ e2b2 and β with most recent values of experimental and theoretical was done.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
الموضوع الدقيق: الفيزياء
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: فاطمة عبد الامير جاسم
اسم المؤلف: رسل سعد هادي

دراسة طيفية لبعض الجزيئات ثلاثية الذرات باستخدام الطرق شبه التجريبية Spectroscopic study of some tri atomic molecules using semi - empirical methodes

المستخلص: تــم في هــذا البحث دراسـة الخـواص الطيفيه كجهد التاين , الالفه الالكترونيه وقيم الطاقه للمدارات الجزيئيه المشغوله بالالكترونات (EHOMO)، والفارغة من الالكترونات (ELUMO) وفجوة الطاقة وكذلك حساب الكهروسالبيه والصلاده الكيميائيه والنعومه (قابلية التفاعل). لبعض الجزيئات ثــلاثيـة الـــذرات نظـــريا , اذ ان الجزء النظري تمت دراسته من خلال استخدام برنامج كاوسين (Gaussian09 لبعض الجزيئات الثلاثية الذرات كجزيئة ثاني اوكسيد الكربون , الماء , الاوزون , هيدروكسيد الصوديوم , كبريتيد الهيدروجين وكلوريد المغنسيوم وذلك باستخدام برامج الكم شبه التجريبية التي تستغرق مدة زمنية للحسابات (PM3,PM6) قياسا الى الطرائق المتقدمه التي استخدمت في البحث هي طريقتا دوال الكثافة وهارتري فوك ( HF, DFT ) وباستخدام عناصر مجاميع اساس مختلفه . تم رسم الشكل الهندسي الفراغي الاكثر استقرارا اعتمادا على المحاور الداخلية (˚r,θ˚,Φ)f ومنها تم حساب اطوال الاواصر والزوايا المحصورة بينها وعزمي القصور الذاتي وثنائي القطب , ثوابت الدوران , الكتله المختزله , طاقة نقطة الصفر والاستقطابيه وطاقات المستويات الاهتزازية المنشطرة نتيجه لتاثير رينر - تيلر , ومضاعف - - ℓ وحساب الانتقالات بين المستويات الاهتزازيه كذلك حساب الطاقه الكليه للجزيئات كافه. كذلك تم حساب ترددات انماط الاهتزاز الاساسية للجزيئه ورسمها ضمن منطقة الاشعة تحت الحمراء من الطيف الكهرومغناطيسي . اذ توصلت الحسابات النظرية ان قيم مضاعف - ℓ - تزداد كلما انتقلت الجزيئات الى مستويات طاقة اعلى واما بالنسبة لحسابات تاثير رينر - تيلر وجد انها تسبب في انشطار مستويات الطاقة الاهتزازية بالنسبة لكل الجزيئات في المستويين الاهتزازيين (1,0,1) و(2,2,0) لهما مقدار الطاقة نفسه . اضافة الى جانب وجود مستويات طاقة اخرى منشطرة متقاربة في قيم طاقاتها . | The study of spectral properties such as ionizations potential, electron affinity, electronegative, chemical hardness, softness and electrophonic index from inharmonic potential energy curve, spectroscopic dissociation also calculated EHOMO, ELUMO and energy gap Eg by theoretical parts .this studies by using Gaussian 09 (Gaussian 09 Revisioon - A - 02 - SMP) program of some tri - atomic molecules such as (CO2, H2O ,O3 NaOH ,H2S , MgCl2 molecules ) using semi empirical quantum programs , By using semi - empirical (PM3,PM6) , density functional theory and Hartree - Fock (DFT ,HF) methods this by using different basis sets So after drawing structure optimization of molecules depending on the internal coordinate f(r,θo,φo), then calculate length of bonds and angles between it , moment of inertia, dipole moment for Molecules by quantum mechanics methods which, then we calculated the orbital energy values (EHOMO ) and (ELUMO) ; and from these values ; ionization energy was calculated for molecule by take absolute values to (EHOMO )A computational calculation is a valuable tool for estimating the (geometry, total energy, electronic properties, dipole moment, polarizability, electrostatic surface potential, vibration frequencies) of molecular structures. The IR spectrum of molecule primitive vibration frequency located within infrared region from spectrum ranged is obtained Then - ℓ - type doubling we conclude that values increasing with it exited to high levels , from Renner - Teller effect cause splitting of energy of or vibrational state (1,0,1) , (2,2,0) have the same energy
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: العربية
الدرجة: دكتوراه
الموضوع الدقيق: الفيزياء
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: زياد عدنان صالح
اسم المؤلف: ذكرى كمال طه

تقدير الحاصل النيتروني لبعض نوى النظائر المتوسطة نتيجة لتفاعلات البروتون وجسيمات الفا والنيوترون لمدى طاقة (E=10 - 50) MeV

المستخلص: للنظائر اهمية كبيرة في كثير من المجالات مثل المجالات البحثية والصناعية والطبية ومجالات اخرى. فبعضها يحتاج لنظائر بنصف عمر طويل او بنصف عمر قصير وحاصل نيتروني عالي او قليل للحالتين, لذا تضمن هذا العمل دراسة الخصائص النووية لتسعة عناصر متوسطة الاعداد الكتلية هي (Ca ,Sc ,Ti ,Ni ,Cu ,Zn ,Zr ,Nb ,Mo ), ولكل عنصر تم اختيار عشرة نظائر لذا تضمنت الدراسة 90 نظير اعدادها الكتلية بين (41 الى 96) , شملت هذه الدراسة حساب طاقة التفاعل, طاقة العتبة, الكتلة المختزلة, طاقة فصل النيوترون وطاقة الربط النووية لتفاعلات ,Ca(α,n)Ti Ni(α,n)Zn , Zr(α,n)Mo , ,Sc(p,n)Ti ,Cu(p,n)Zn Nb(p,n)Mo , ,Ti(n,n)Ti Mo(n,n)Mo ,Zn(n,n)Zn لنظائر العناصر اعلاه , كما تم حساب قدرة الايقاف باستعمال برنامج (SRIM 2013) ومن ثم حساب الحاصل النيتروني من المعادلات النظرية اعتمادا على احدث ما نشر من المقاطع العرضية للعامين (2010 ,2012 ), كما تم في هذه الدراسة استخراج مجموعة من المعادلات شبه التجريبية الموحدة لحساب المحصول النيتروني لهذه العناصر بشكل مباشر لنوعين من التفاعلات (α,n) و(p,n) والتي كل منها يشتمل على عشرة نظائر ليكون المجموع 60 تفاعل, نتائج الحاصل النيوتروني المحسوبة من هذه المعادلات اعطت توافقا جيدا مع القيم النظرية التي حسبت من المعادلات النظرية. هذه المعادلات مع ثوابتها وضعت ضمن برنامج ماتلاب صمم لهذا الغرض وبالاعتماد على نوع العنصر ونوع التفاعل وطاقة الجسيم الساقط لايجاد الحاصل النيتروني لاي نظير عدده الكتلي بين (40 - 100 ) لمدى طاقة يتراوح بين (15 - 50) مليون الكترون فولط. يمكن تطوير البرنامج ليشمل عدد اكبر من العناصر بنظائرها ولمديات طاقة اوسع. | Isotopes have a great importance in many fields such as research, industrial, medical and other. Some of them need isotopes with long half life or short half - life with high neutron yield or less for them. So this work included the study of the nuclear properties for nine medium elements (Ca, Sc, Ti, Ni, Cu, Zn, Zr, Nb and Mo), from each element we choose 10 isotopes, so the total are 90, their masses numbers were between (41 to 96), this study included the calculations of the Q - value reaction, threshold energy, reduced mass, separation energy of neutron and the binding energy for nuclear reactions , Ca(α,n)Ti , Ni(α,n)Zn , Zr(α,n)Mo , Sc(p,n)Ti , Cu(p,n)Zn , Nb(p,n)Mo , Ti(n,n)Ti Mo(n,n)Mo and Zn(n,n)Zn for the isotopes of the above elements, also we calculated the stopping power by using a (SRIM 2013), then the neutron yield was calculated from theoretical equations depending on most recent cross - sections (2010.2012), as well as this study focused on the extraction of a set of uniform empirical equations to calculate the neutron yield in directly for (α, n) and (p, n) reactions for these elements, and each of them includes 10 isotopes so the total reactions are 60. The result of neutron yield for these equations was in a good agreement with theoretical value which is calculated from the theoretical equations. These set equations with their coefficients were put within the MATLAB program, it was designed for this purpose and by depending on the element type, the type of reaction and incident particle energy to find the neutron yield for any isotope, their mass number is between (40 - 100) for energy range within the (15 - 50) MeV. This program can be developed to include a greater number of elements with their isotopes and for larger energy range.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: دكتوراه
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: خالد هادي مهدي العبيدي
اسم المؤلف: رافت عبد الحسن مسلم

تصنيع كواشف ضوئية باستخدام اوكسيد التيتانيوم المطعم باوكسيد الخارصين ذو التركيب النانوي بواسطه تقنية الليزر النبضd Fabrication of photovoltaic detectors using TiO2 doped with ZnO nanostructure by PLD technique

المستخلص: In this work, a Nd : YAG laser beam (λ=1064nm, repetition rate 6 Hz with the pulse duration 10ns) has been used to deposit thin films TiO2 pure and TiO2 doped with ZnO at different concentrations (2%, 5%, 7%) on glass and silicon substrates. The laser fluence is kept at 700 mJ/cm2 and the pressure is kept at 10 - 2 mbar to specify the optimum condition of deposition. TiO2 - ZnO thin films are investigated by using different techniques such as X - Ray Diffraction (XRD), Atomic Force Microscope (AFM), UV - VIS transmittance spectroscopy, Hall Effect and detector properties equipment.X - Ray Diffraction (XRD) results showed that by increasing ZnO concentration and annealing temperature (500°C) TiO2 transformed from amorphous structure to polycrystalline structure. AFM results showed that the RMS and the grain size was increased with increasing the concentration of zinc oxide. The root mean square (RMS) reachs to 15.2 nm at room temperature and after annealing temperature at 500°C reachs to 16.1nm. Also, the grain size increased with increasing ZnO concentration up to (100.12) nm at the concentration 7% after annealing temperature. UV - VIS transmittance measurements show that the transmittance were high in infrared region and decreases with increasing ZnO concentration and after annealing. Hall Effect is studied to estimate the type of carriers. From the results it was deduced that all (TiO2 : ZnO) films were n - type. As a result, it has been found that film structure and properties are dependent on annealing , as well as different concentrations.From the (I - V) measurements by using UV laser diode with a wavelength (385nm) found that the responsivity of the detector increased at concentration 7% reach to (3.39)A/W and after annealing in temperature 500°C reach (3.82)A/W.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: سمر يونس الدباغ
اسم المؤلف: ذرى طارق عباس

دراسة تاثيرات خسارة الانحناءات لليف البصري في منظومة الاتصالات البصرية Study Effects of Optical Fiber Bending Loss in Optical Communication System

المستخلص: في هذا البحث , تم دراسة تاثير الانحناء على انتقال الاشارة الضوئية خلال الالياف البصرية. هذا العمل يتضمن قياسات الخسارة في القدرة خلال الليف البصري بوجود الانحناءات عند عدد لفات مختلفة من (1 - 10) لفة وعند اقطار انحناء مختلفة (12.5 , 10.5 , 8 , 6 , 4 , 3 , 2 , 1) cm. نوعين من الالياف البصرية تم استخدامها , الليف المتعدد الانماط (MMF ) باطوال مختلفة (1 , 20 , 40 , 100 , 120 , 140 ) m وليف احادي النمط بطول (4.5 m) .واستخدم نوعين من الليزرات ليزر دايود الاحمر (λ=650 nm) وليزر دايود اخضر (λ=532 nm).القدرة الضوئية تم قياسها باستخدام جهاز قياس القدرة. تشير النتائج ان كلما قل قطر الانحناء وزادت عدد اللفات فان الخسارة في القدرة الضوئية تزداد. حيث ان القدرة الضوئية لليزر الاخضر عند الطول الموجي (λ=532 nm) تقل من (48.083*10 - 4) mW الى (41.114*10 - 4) mW عند اللفة الاولى لليف متعدد الانماط بطول (40m) عندما تم حني الليف من cm12.5 الىcm 1. اما لليف الاحادي النمط, فان القدرة الخارجة لليزر الاخضر عند طول موجي (λ=532 nm) تقل من (13.608) mW الى (13.32) mW عند اللفة الاولى من طول (4.5) m لليف احادي النمط عندما تم حني الليف من 12.5 cm الى 3 cm . اظهرت النتائج ايضا ان تاثير الانحناء في القدرة الخارجة في حالة الليف المتعدد الانماط اكبر مقارنة بالليف احادي النمط. وكذلك النتائج لهذا البحث تتضمن تصميم وتنفيذ منظومة اتصال الالياف البصرية لفحص تاثير الانحناء على الاشارات المنتقلة خلال الالياف البصرية متعددة الانماط حيث لف من (1 - 10) لفة وعند اقطار انحناء مختلفة ( 1,2,3,4 ) cm . تم تضمين الاشارات باستخدام ليزر nm 532 .الاشارة تم ارسالها خلال ليف متعدد الانماط باطوال مختلفة وهذه الاشارة تم الكشف عنها باستخدام كاشف السليكون الضوئي (AEPX 65) . وجد ان الانحناءات تؤدي الى تغييرات واضحة في سعة ( جهد ) الاشارة الخارجه ؛ حيث يقل الجهد من 0.64volt الى 0.52 volt عند زيادة عدد اللفات من) 1 - (10 لفة في ليف بطول 40m وقطر الانحناء (1) cm.ويقل الجهد الى حد 0.2 volt في ليف بطول 140m وقطر الانحناء (1) cm.واخيرا الاشارات المنتقلة فيمنظومة الياف بصرية باستخدام كاميرا (CCD) واستخدام حاسبة شخصية معUSB TV STICK لرؤية تاثير الانحناء على انتقال الاشارات خلال الالياف البصرية. حيث ان الاشارة الخارجة ستقل من 0.68 volt الى 0.6 volt عندما عدد اللفات تزداد من (1 - 5) لفة في ليف بطول (1) m .اجرى احتساب كل من نسبة الاشارة الى الضوضاء ومعدل الخطا في نقل البيانات في للاشارات المنتقلة في منظومة الاتصالات عند اقصى طول لليف البصري 140m وعند اللفة 10 فكانت 115.147dB و3.68x10 - 27 على التوالي . بينما نسبة الاشارة الى الضوضاءSNR ومعدل الخطاBER في نقل البيانات في الاشارات المنتقلة باستخدام كاميرا CCD عند طول الليف البصري 1m وعند اللفة 10 فكانت 100.49dB و5.98x1o - 24 على التوالي .. اظهرت النتائج ايضا ان نسبة الاشارة الى الضوضاء تقل ومعدل الخطا في نقل البيانات يزداد بزيادة عدد اللفات في كلا المنظومتين | In this work, bending loss effects of optical fiber on the transmitted signal were studied.This work includes measurements of the power loss through optical fiber with the presence of bends at different wrapping turns (1 - 10) turns and at various bending diameters (12.5, 10.5, 8, 6, 4, 3, 2, and 1) cm. Two types of optical fibers were used, multimode optical fiber (MMF) of different lengths (1, 20, 40, 100, 120, 140) m and a single mode optical fiber (SMF) of length (4.5 m). Two optical sources were used, Red laser diode (λ=650 nm) and green laser diode (λ=532 nm). The output power was measured using an optical power meter. Results indicated that as the bending diameter decreased and the number of wrapping turns increased, the power loss increased. The output power of green laser diode at (λ=532 nm) decreased from (48.083*10 - 4) mW to (41.114*10 - 4) mW at the first turn of 40m MM fiber length when bent from (12.5 to 1) cm. For SMF, the output power of green laser diode at (λ=532 nm) decreased from (13.608) mW to (13.32) mW at first turn of (4.5) m SM fiber length when bent from (12.5 to 3) cm. The higher alteration output power in the case of multimode fiber has been deduced as compared with that of the single mode fiber. Also the results of the project involves a design and an implementation optical fiber communication system to investigate the effect of bending on the transmitted signals through multimode optical fiber wrapped (1 - 10) turns and at different diameters (1, 2, 3, 4) cm . Signals were modulated using 532nm laser diode then sent through multimode fiber of different lengths and detected by silicon photo detector (AEPX 65). The bending induces changes in the amplitude (voltage) of the output signal, the output voltage decreased from 0.64 volt to 0.52 volt when the no. of turns increased from 1 - 10 turns for 40 m optical fiber at a bending diameter of (1cm) and decreased to 0.2 volt for 140m multimode fiber at a bending diameter of (1cm).Finally, a transmitted signal in optical communication system has been built using CCD camera and Pc with USB TV STICK for monitory the effect of bending on signals that transmitted through optical fibers. The output transmitted signals decreased from 0.68 volt to 0.6 volt when the no. of turns increased from 1 - 5 turns for 1 m optical fiber. The calculations of signal to noise ratio (SNR) and Bit Error Rate (BER) for transmitted signals in optical communication system at maximum fiber length of 140m and 10turns are equal to 115.147dB and 3.68x10 - 27 respectively. While for transmitted signal form CCD camera at fiber length 1m and of 10 turns are equal to 100.49dB and 5.98x1o - 24 respectively.Results show that SNR decreased and BER increased as no. of wrapping turns increased for both systems.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
الموضوع الدقيق: الفيزياء
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: سمر يونس الدباغ
اسم المؤلف: دعاء هشام محمد

الخواص الالكترونية لمادة هجينة مركب ثلاثي - خماسي/كرافين : حسابات نظرية دالية الكثافة Electronic Properties of III - V Compound / Graphene Hetero Material : Density Functional Theory Calculations

المستخلص: هذه الاطروحة هي دراسة نظرية للخصائص التركيبة والالكترونية لمجموعتين من اوراق الجرافين. وتضمنت المجموعة الاولى ثلاثة اوراق جرافين نقية ذات اطوال مختلفة GR1 ˃ GR2 ˃ GR3، وتمثل المجموعة الثانية ثلاثة اوراق متغايرة من جرافين - مركبات B/P والتي تم بنائها اعتمادا على GR1. تم تنفيذ العمليات الحسابية باستخدام تقريب الكثافة الموضعي / LDA / SZ لنظرية دالية الكثافة. وقد استخدم برنامج Gauss View 5.0.8 لتصميم تراكيب اوراق الجرافين النقية والمشوبة. في البداية، تمت عملية استرخاء هذه التراكيب عن طريق استخدام طريقة PM6 شبه التجريبية مع الدالة الهجينة B3LYP - DFT عند حزمة من برامج Gaussian 09 وبعدها تمت عمليه استرخاء التراكيب باستعمال برنامج SIESTA trunk - 462 من خلال تطبيق نظرية دالية الكثافة LDA / SZ. يلاحظ من نتائج الخصائص التركيبية لاوراق الكرافين المدروسة ان هناك استرخاء جيد لهذه التراكيب، تبقى قيم الاواصر في اوراق الكرافين النقية C - C، C⚍C وC - H في نفس المديات لتراكيب حلقات الكربون. كذلك، ان اضافة مركباتB / P في ورقة الجرافين النقية لبناء اوراق الجرافين المتغايرة لم يؤثر على الخصائص التركيبة للتركيب الاصلي . وان الالتواء الملاحظ في حلقات الفينيل في مناطق الاتصال مع الحلقات المطعمة ياتي من زوايا الالتواء بين ذرات مختلفة بسبب اختلاف الكتلة الذرية والكهروسالبية لذرات B، P وC. تم استخدام نظرية دالية الكثافة LDA / SZ في برنامجGollum لحسابات الخصائص الالكترونية لمجموعتي اوراق الجرافين. ان نتيجة الطاقة الكلية لاوراق الجرافين المدروسة هو انعكاس لطاقة الربط لكل تركيب وتشير الى ان هذه التراكيب تمتلك استرخاء جيد ، وتاثير اضافة ذراتB وذرات P في ورقة الجرافين النقية GR1 كان له دور فعال على الطاقة الكلية للجزيئة. نبين ان كل اوراق الجرافين لها موصلية عالية وفجوة طاقة ممنوعة صغيرة، لكنها تتذبذب تبعا لطول وشكل كل ورقة وعدد وموضع ذرات B وP في الورقة. واظهرت القيم المحسوبة لطاقة فيرمي EF بان قيم EF لاوراق الجرافين النقية تتزايد مع تناقص طول الورقة. وباضافة ذرات B وP باشكال وهيئات مختلفة في GR1 سوف يغير من موقع مستوى فيرمي، ان كافة الاوراق المطعمة لها EF اكبر تقريبا من GR1. وياتي ذلك من اضافة مركبات B / P في GR1 الذي اعطى للورقة خصائص الكترونية جديدة.ان طاقة التاين IE والالفة الالكترونية EA لاوراق الجرافين النقية تنخفض قليلا مع تناقص طول الورقة. وكافة اوراق الجرافين المطعمة لها قيم منخفضة من IE وEA بالمقارنة مع GR1 النقي. ايضا، تظهر نتائجنا ان جميع اوراق الجرافين النقية والمطعمة تمتلك صلادة كهروكيميائية H عالية ومرونة الكترونية S عالية . المرونة الالكترونية العالية ستفتح افاق مستقبليه كاشارة لفجوة حزمة للتركيب مما يجعله يكون مرنا نوعا ما ، ان الكهروسالبية X قد انخفضت مع تناقص طول اوراق الجرافين النقية ، وX لاوراق الجرافين المطعمة هو اقل منها لورقةGR1 ، وهذا يعني ان الالكترونات في هذه الاوراق المطعمة لديها ميل كبير للهروب.واظهرت النتائج ان التوصيليات الكهربائية والحرارية لاوراق الجرافين النقية تكون في الترتيب GR1 ˃ GR3 ˃ GR2 ، التوصيلة الكهربائية والتوصيلة الحرارية لاكبر ورقة تكون هي القيم العليا، وهذا يرجع الى ان GR1 لديه قنوات متعددة لنقل الالكترون، من ناحية اخرى، القيم العليا لفجوة الطاقة خفضت التوصيلة الكهربائية والتوصيلة الحرارية. في حين، ان التوصيلة الكهربائية، وبالتالي ,التوصيلة الحرارية لاوراق الجرافين المطعمة كانت في الترتيب GR6 ˃ GR5 ˃ GR4، وبزيادة عدد ذرات B وP في الورقة انخفضت التوصيليات الكهربائية والحرارية. في جميع الحالات ، ان GR1 النقي لديه قيم توصيلية كهربائية وحرارية اعلى من تلك التي للاوراق المطعمة .ان النتيجة القيمة للغاية تم الحصول عليها من خصائص I - V للتراكيب المدروسة حيث ان سلوك التحسس قلل تماما من تاثيرات درجة الحرارة العالية التي تظهر في الاجهزة الكبيرة القديمة. وتشير حسابات I - V ان التفاعل المناسب مع الاقطاب يكون تاثيره محدودا الى حد ما على سلوك التحسس لاوراق الجرافين النقية والمطعمة. ان نتائج التحسس نتجت من تقليل فجوة الطاقة بين HOMO للورقة ومستوى فيرمي لقطب الذهب في الحيز الامامي والعكسي . ومن نتائج معامل Seebeck، يظهر لنا مساهمة متماثلة لتراكيز الالكترونات والفجوات حول منطقة الطاقة، وقد تبين ان الورقة الاكبر GR1 تملك القيمة الاقصى لمعامل Seebeck . وقد لوحظ ان معاملات الانتقال لاوراق الجرافين النقية تحدث على طول مدى واسع من طاقة الالكترون لانها لا تحوي منطقة استطارة. ايضا، ان الورقة مع عدد قليل من ذرات B وP كالحلقة النقطية في منتصف الورقة GR6 لها قيمة عالية من معامل الانتقال ، وهذا بسبب العدد الكبير من القنوات المفتوحة. وبشكل عام، معامل الانتقال للاوراق المدروسة لديها مدى واسع على نطاق الطاقة | This thesis is a theoretical study of structural and electronic properties of two groups of graphene sheets. The first group included three pure graphene sheets of different lengths GR1 ˃ GR2 ˃ GR3, and the second group represents the three sheets of heterojunction graphene - B/P compounds which were constructed on the basis of GR1.The calculations are carried out using the Local Density Approximation/Single Zeta LDA/SZ density functional theory. Gauss View 5.0.8 program was used to design the structures of pure and doped graphene sheets.Initially, these structures are relaxed by employing the PM6 semi - empirical method with the hybrid functional B3LYP - DFT at Gaussian 09 program package , and then they are relaxed at SIESTA - trunk - 462 of program by employing the LDA/SZ density functional theory. The results of the structural properties of the studied graphene sheets showed that there is good relaxation of the structures, the values of C - C, C⚍C and C - H bonds in pure graphene sheets remain in the same ranges of the carbon rings structures. So, the addition of B/P compound in pure graphene sheet to construct the heterojunction graphene sheets has no effect on the structural properties of the original structure. The screw observed in phenyl rings at the contact regions with the doped rings comes from the twist angles between different atoms due to the difference of the atomic mass and electronegativity of B, P and C atoms. The LDA/SZ density functional theory at the Gollum program was used for the calculations of the electronic properties of the two groups of graphene sheets. The result of the total energy of the studied graphene sheets is a reflection of the binding energy of each structure and indicates that these structures have good relaxation, and the effect of adding B and P atoms in pure graphene sheet GR1on the total energy of the molecule is effective. We showed all graphene sheets have high conductivity and small forbidden energy gap, but it vibrates depending on the length and shape of each sheet and the number and position of B and P atoms in the sheet. The calculated values of Fermi energy EF showed that the EF values of pure graphene sheets increase with decreasing the length of the sheet. Adding the B and P atoms in various shapes and forms in GR1 changes the position of Fermi level, all the doped sheets have EF approximately greater than that for GR1. This comes from the addition of B/P compound in GR1which gave the sheet new electronic properties. The ionization energy IE and electron affinity EA of the pure graphene sheets slightly decrease with decreasing the length of the sheet. And all doped graphene sheets have low values of IE and EA in comparison with the pure GR1. Also, we showed that all the pure and doped graphene sheets have low electrochemical hardness H and high electronic softness S. High electronic softness will pave the way for future prospects as a sign for that band gap of the structure wich becomes rather soft, the electronegativity X was decreased with decreasing the length of the pure graphene sheets, and the X of the doped graphene sheets is less than that for GR1, that means the electrons in these doped sheets have a large escaping tendency. The results showed that the electrical and thermal conductivities of the pure graphene sheets are in the order of GR1 ˃ GR3 ˃ GR2, the electrical conductivity and the thermal conductivity of the largest sheet are the higher values, this is due to the fact that GR1 has multi channels of electron transfer,and on the other hand, the higher the value of the energy gap,it decreased the electrical conductivity and the thermal conductivity. While, the electrical conductivity and therefore, the thermal conductivity of the doped graphene sheets are in the order of GR6 ˃ GR5 ˃ GR4,and by increasing the number of B and P atoms in the sheet, the electrical and thermal conductivities decreased. In all cases, the pure GR1 has values of electrical conductivity and thermal conductivity higher than those for the doped sheets. A very valuable result was obtained from I - V characteristics of the studied structures, in which the sensing behavior completely reduces the high temperature effects that appear in the old macro devices. The I - V calculations suggest that the suitable interaction with the electrodes have a rather limited influence on the sensing behavior of the pure and doped graphene sheets . The sensing results from the lowering of the energy gap between the HOMO of the sheet and the Fermi level of the gold electrode in the forward and reverse bias. From the results of the seebeck coefficient, we showed symmetrical contribution of electrons and holes concentrations around the region of the energy, it is found that the largest GR1 has the maximum value of seebeck coefficient. The transmission coefficients observed for the pure graphene sheets take place along a wide range of electron energy because they have not got a scattering region. Also, the sheet with small number of B and P atoms as a dot doped ring in the middle of the sheet GR6 has high value of transmission coefficient, this is due to high number of open channels. In general, the transmission coefficient of the studied sheets has a wide range on energy scale
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
الموضوع الدقيق: فيزياء الالكترونيات
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: حامد ابراهيم عبود محمد التميمي صباح نوري مزهر
اسم المؤلف: حوراء علي عبد الرضا

تحضير ودراسة سلوكيات الرص لمتراكبات (الومينا - المنيوم) Preparation & Studying the Compaction Behaviors of the (Alumina - Aluminum) Composite

المستخلص: تم تحضير المتراكب السيرميتي (سيراميك - معدن) من مادة الالومينا (Al2O3 - γ( كمادة اساس، ومن معدن الالمنيوم (Al) كمادة تدعيم، لتراكيز مختلفة من الالمنيوم (0 - 50)%، ونسبة زيادة التدعيم 10)%).تمت عملية التشكيل باستعمال الضغط باتجاه واحد، وانجزت عملية التلبيد في جو مفرغ من الهواء. درست سلوكيات الرص بحالة التلبيد الصلبة عند درجات حرارة التلبيد (400، 450، 550) م° ، وازمان التلبيد (2، 4، 6) ساعات، وعند ضغوط تشكيل (50، 100، 150) بار، تم الحصول على افضل الخواص الفيزيائية عند (550م°، 2ساعات، 150ساعة). تمت دراسة حالة تلبيد الطور السائل كدالة لتغير نسبة الالمنيوم في المتراكب عند (800م°، 2ساعة، 150بار)، بناء على ما تم التوصل اليه من خواص فيزيائية جيدة عند حالة التلبيد بالطور السائل، اختيرت هذه المواصفات لدراسة تاثير تغير الضغط عند (50، 100، 150) بار على الخواص الفيزيائية للمتراكبات السيرميتية المحضرة. اظهرت السلوكية عند المنطقة التي تحتوي تركيز الالمنيوم (40 - 50)% افضل الخصائص الفيزيائية، تبعا لذلك، درست اغلب القياسات على التركيز صاحب نسبة 50% من مادة الالمنيوم. المفهوم الاساسي الذي تضمنته هذه الدراسة هو التلاصق الفيزيائي بين مكونات المتراكب السيرميتي المحضر، والذي كان واضح من فحص انحراف الاشعة السينية. كذلك من الفحص المجهري (SEM) نلاحظ ان المتراكب النهائي (السيرميتي) المحضر اشبه الى ما يكون جزر موصلة (مادة الالمنيوم) مفصولة بمناطق عازلة (مادة الالومينا) وهذا ناتج بفعل التلاصق الفيزيائي. لوحظ ان زيادة نسبة الالمنيوم للمتراكبات المحضرة يلعب دورا مهما في الخواص الفيزيائية والكهربائية والتي تم مناقشتها بالتفصيل، وكذلك حسن من قيمة الصلادة للمتراكبات المحضرة، حيث ان التوزيع العشوائي لدقائق الالمنيوم ضمن مادة الالومينا، كون اقرب الى ما يكون الى شبكة داخلية معدنية زادت من متانة المتراكب المحضر من خلال ملء المسامات الموجودة غالبا بسبب مادة الالومينا الهشة. من خلال هذه الدراسة توصلنا الى ان المتراكب المحضر له نسبة مسامية عالية والتي يمكن توظيفها في صناعة فلترات الوقود. كما يمكن توظيف الخواص العزلية المحسنة التي توصلنا اليها في صناعة المتسعات السيرميتية (cermet capacitors )، كذلك من خواص مقاومة البلى التي توصلنا اليها، ممكن توظيفها في تصنيع ادوات القطع والبرد بعد اجراء التحسينات اللازمة. | A cermet (ceramic - metal) composite have been prepared from alumina ceramic (γ - Al2O3) as a matrix and from aluminum metal (Al) as reinforcement, prepared for different concentrations of aluminum (0 - 50)%, the reinforcing increment is (10%).The forming process was done by single action pressing, and the sintering process was done in vacuum atmosphere.The compaction behaviors of prepared cermet bodies were studied in solid state sintering, at sintering temperatures (400, 450, 550) °C, sintering times (2, 4, 6) hrs. and forming pressures (50, 100, 150) bar, the best physical properties were gained at (550 °C, 2hrs., 150bar).Liquid phase sintering process was studied as a function of Al percent in the composite at (800 °C, 2 hrs., 150 bar). According to the interesting physical properties we gained from liquid phase sintering process, these parameters were chosen to study the effect of the forming pressure ((50, 100, 150) bar) on the physical properties of the prepared cermet bodies. The behavior at the region that have aluminum concentration (40 - 50)% showed the best physical properties, according to this, most of the measurements were studied on the concentration of 50% of aluminum material. The basic concept of this study is the physical adhesion between the material particles of the prepared cermet bodies, which was obvious from the XRD tests. Also from the SEM micrograph we have notice the final structure of the prepared cermet, which is more like conducting islands (aluminum) separated by isolated areas (alumina), which is a sequent of the physical adhesion action.Increasing of aluminum content in the composite materials prepared may play an important role in physical and electrical properties has been discussed in detail, also enhanced the hardness of the samples, where the random distribution of aluminum particles through the alumina material, makes more like internal web of metal, that helps to increase toughness of samples by filling the porosities existed because of the brittle alumina.From this study we noticed, we have relative high porosity that could be employed in fuel filters. Also we have fine dielectric properties that could inter the application of cermet capacitors. Also, we have reasonable wear result that can be employed in grinding and cutting tools after improvements have been done.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: ماجستير
السنة: 2015
الموضوع العام: علوم الفيزياء
اسم المشرف: عبد الحميد رحيم مهدي الصراف
اسم المؤلف: حنان جميل مصطفى

قياس النشاط الاشعاعي في نماذج بايولوجية باستخدام كاشف الاثر النووي CR - 39 Radioactivity Measurement in Biological Samples Using Nuclear Track Detectors CR - 39

المستخلص: تضمنت هذه الدراسـه قياس تراكيز اليورانيوم في نماذج بايولوجيه مختارة من جسم الانسان ودمه , باستخدام تقنية التنشيط النيوتروني (النيوترونات الحراريه) المنبعثه من المصدر النيوتروني (241Am - 9Be) بسيل نيوتروني مقداره ((1.8 x1011 n/cm2, وتقنية عد اثار شظايا الانشطار النووي باستخدام كاشف الاثر النووي للحاله الصلبه CR - 39) ). تم جمع خمسون نموذج بايولوجي من محافظتي (بغداد وميسان ) اذ شملت هذه النماذج (نماذج الدم الغير مسرطن ونماذج الدم المسرطن من نوع سرطان الدم النخاعي المزمن ), وشملت الانسجه البشرية جهازين من جسم الانسان هما الجهاز الهضمي (المعده,الامعاء الدقيقه, الكبد, القالون,المراره, البنكرياس والاثنى عشر). والجهاز البولي (الكلى ,الحالب والمثانه) وتضمنت هذه الانسجه حالتين مرضيتين هما الاورام الحميده والخبيثه.شععت النماذج التي تم الحصول عليها بعد تحضيرها لمدة (7) ايام بالنيوترونات الحراريه المنبعثه من المصدر النيوتروني ذو الفعاليه (12 Ci) وبفيض نيتروني (5x105n.cm - 2.s - 1) وذلك لاجل شطر اليورانيوم الموجود في النماذج وتسجيل اثار شظايا الانشطار على الكاشف.درست ازمنه مختلفه لقشط هذه الكواشف لاجل الوصول الى الزمن الامثل للقشط باستخدام الحمام المائي حيث تم اختيار المحلول الكيميائي القاشط NaOH)) بعياريه6.25N)) ودرجة حراره (70 Co) وتبين ان الزمن 70 min)) افضل زمن قشط للكواشف التابعه لنماذج الدم والزمن (90min) افضل زمن قشط للكواشف التابعه لنماذج الانسجه البشريه .بينت هذه الدراسة ان اعلى قيمة تركيزلليورانيوم وجدت في نماذج الدم غيرمسرطنه (ppm 0.146) واقل قيمه (ppm 0.078) وبمعدل (0.107ppm) وفي نماذج الدم المصابه اعلى قيمه كانت (0.121 ppm) واقل قيمه تركيز (0.045 ppm) وبمعدل (0.085 ppm) اما في نماذج الانسجة البشريه اعلى قيمة تركيز لليورانيوم في الجهاز الهضمي بلغ (ppm 0.068) واقل قيمه (0.022 ppm) وبمعدل تركيز (0.044ppm ) وفي الجهاز البولي اعلى قيمه كانت (ppm 0.06) واقل قيمه كانت (ppm 0.023) وبمعدل تركيز(0.047 ppm) | This study involvement the measurement of uranium concentrations in biological samples selected from Human body and its blod using neutron activation technique (thermal neutrons) emitted from the neutron source (241Am - 9Be) with neutron flounce (1.8 x1011 n / cm2), using technique of the nuclear fission fragments in solid state Nuclear track detector (CR - 39) Fifty biological samples were collected from two governorates (Baghdad and Maysan) , included blood samples ( Normal and Leukemic type CML) and tissues samples of digestive system (Liver, Small intestine, Stomach, Gallbladder, Colon, Pancreas and Duodenum) and urinary system(Bladder, Kidney and Ureter) were this included two types of disease (Benign tumors and malignant tumors ) All samples are irradiation After preparation for (7) days to thermal neutrons emitted from the neutron source with activity (12Ci) and neutrons flux(5x105n.cm - 2.s - 1) fission fragments in the samples and recorded tracks on detector.Studied different etching times of these detectors and to reach optimized time by using the water bath for etching where Choose chemical solution (NaOH) with (6.25N) and a temperature (70oC) , and show that the time (70 min) the best etching time of the detectors affiliated to the blood samples and time (90min) the best etching time to detectors affiliated to the human tissues samples.This study showed that the highest value of the concentration of uranium in Normal blood samples (0.146ppm) and the lowest value (0.078ppm) with average (0.107ppm) and in Leukemia blood samples the highest value (0.121 ppm) and the lowest value (0.045 ppm) with average (0.085 ppm), but in the tissue samples the highest value of the concentration of uranium in the digestive system(0.068 ppm) and the lowest value(0.022 ppm) with average (0.044ppm) and in the urinary system the highest value( 0.06 ppm) and the lowest value (0.023 ppm) with average (0.047 ppm).
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: العربية
الدرجة: ماجستير
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: نضالة حسن كاظم العاني
اسم المؤلف: هدية حاتم نصيف

قياس تراكيز اليورانيوم والرادون في تربة بعض مناطق جنوب شرق بغداد باستخدام كاشف CR - 39 Measurment of Uranium and Radon Concentrations in Soil of Some Regions in South East of Baghdad Using Nuclear Track Detector(CR - 39

المستخلص: اجريت هذه الدراسة لتحديد تراكيز اليورانيوم وغاز الرادون في تربة بعض مناطق جنوب شرق بغداد (التويثة وعشتار والوردية وفلكة المدائن وجسر ديالى والرياض وسلمان باك ) .استعملت (35) عينة ترابية اخذت من (7) مناطق وبواقع خمسة اعماق لكل منطقة (سطح التربة,10cm, 20cm,30cm,40cm) للتعرف على مدى تلوث تلك المناطق باليورانيوم جراء العبث بالمصادر المشعة التابعة لمنظمة الطاقة الذرية بعد احداث الحرب على العراق عام ((2003 .تضمن الجزء الاول ايجاد تراكيز اليورانيوم في التربة باستخدام تقنية عد اثار شظايا الانشطار في كاشف الاثر النووي (CR - 39) الناتجة من قصف نوى اليورانيوم بالنيوترونات الحرارية من المصدر النيوتروني (Am241 - Be ) بفيض نيوتروني بلغ (5x103n.cm - 2.s - 1), اما الجزء الثاني فقد تضمن ايجاد تراكيز غاز الرادون في التربة باستخدام تقنية عد اثار جسيمات الفا المنبعثة من غاز الرادون في كاشف الاثر النووي (CR - 39). حددت تراكيز اليورانيوم وغاز الرادون بطريقة المقارنة مع النماذج القياسية ومن خلال النتائج المستحصلة نجد ان تراكيز اليورانيوم في عينات الترب كانت كالاتي : التويثة ppm (0.881±0.086),الوردية ppm(0.850±0.077) ,فلكة المدائن ppm(0.762±0.085) ,جسرديالى ppm(0.604±0.037),عشتار ppm(0.557±0.103) , الرياض ppm(0.465±0.171) ,سلمان باكppm (0.441±0.036) وقد بلغ معدل تركيز اليورانيوم لجميع المناطق ppm(0.651±0.180) .اما معدل تركيز غاز الرادون في عينات الترب لمنطقة الدراسة كانت كالاتي : التويثة Bq/m3(84.565±18.889),الورديةBq/m3(78.648±16.363),جسرديالى72.238±17.227) Bq/m3),عشتار Bq/m3 ((68.268±16.306, فلكة المدائن Bq/m3 (63.934±12.685), الرياض Bq/m3(59.097±10.777),سلمان باك Bq/m3(56.113±11.931) وبلغ معدل تركيز الرادون لجميع المناطق Bq/m3 ((68.980±10.297 اجري في هذه الدراسة ايضا تحديد معدلات الانبعاث السطحي والكتلي لغاز الرادون وقد اظهرت النتائج الحالية ان المعدلات العامة للانبعاث السطحي والكتلي لجميع مناطق الدراسة Bq/m2.hr(0.072±0.011) Bq/kg.hr(0.011±0.001) على التوالي . يلاحظ من خلال النتائج التي تم الحصول عليها ان تراكيز اليورانيوم والرادون في منطقة التويثة اعلى من بقية المناطق . | This study was done for measuring the concentrationsof (Uranium and Radon gas) in soil samples taken from South - East Baghdad(AL - Twitha, AL - Wardia, Madain Square, Jeser Diala , Ishtar , Hiay AL - Ryaid and Salman pak) .(35) soil samples are taken from (7) locations with five depths ranged from (soil surface ,10cm,20cm,30cm,40cm) to determine the level of concentration of these areas with Uranium .This contamination was due to the mis handeled of the radioactive sources of the Atomic Energy organization after the war Iraq in (2003).The first part consists the determination of Uranium concentration in soil samples using fission tracks registration in (CR - 39) detector obtained by the bombardment of (U) with thermal neutrons from (241AM - Be) neutron source has flux of 5x103n.cm - 2.s - 1 The second part concerns with the determination of Radon concentration in soil by using alpha - emitters registration wich emit from Radon gas in (CR - 39) detecor .The concentration values were calculated by comparison with standard Sample. The results showed that the concentrations of Uranium in study regions from South - East Baghdad were as the following : AL - Twitha (0.881)ppm , AL - Wardia (0.850)ppm , Madain Square (0.762) ppm ,Jeser Diala(0.604) ppm, Ishtar (0.557) ppm , Hiay AL - Ryaid (0.465) ppm ,Salman pak(0.441) ppm, the average of Uranium concentration in study regions(0.651±0.180) ppm . The Radon gas concentrations in study regions from South - East Baghdad were as the following : AL - Twitha (84.565) Bq/m3 ,AL - Wardia (78.648) Bq/m3 , Jeser Diala (72.238) Bq/m3, Ishar (68.268) Bq/m3 , Madain Square (63.934) Bq/m3,HiayAL - Ryaid(59.097)Bq/m3,Salman - pak (56.113)Bq/m3 The average Radon gas concentration (68.980±10.297)Bq/m3 .The results of the current study showed that the surface exhalation and mass exhalation rates of Radon gas in study regions(0.072±0.011) Bq/m2.hr (0.011±0.001)Bq/kg.hr respectively. This work shows the Uranium and Radon concentration in AL - Twitha is higher than the other regions
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: العربية
الدرجة: ماجستير
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: نضالة حسن كاظم العاني
اسم المؤلف: حلا محمد حمزة

تاثير استبدال Sr على بعض الخواص الفيزيائية للمركب Ba2 - xSrxCa2Cu3O7+? Effect of Sr Substitution on some of Physical Properties of (Ba2 - xSrxCa2Cu3O7+?) Compound.

المستخلص: لقد تم في هذه الدراسة تحضير المركب الفائق التوصيل Ba2 - x SrxCa2Cu3O7+δ ذا درجة حرارة حرجة عالية ولقيم x=0.0, 0.1, 0.2, 0.3, 0.5, 0.6 وباستخدام طريقة تفاعل الحالة الصلبة لغرض دراسة التغيرات الحاصلة في التركيب البلوري ودرجة حرارة التحول والخواص الفيزيائية والخواص العزلية.حيث تم فحص التركيب البلوري باستخدام تقنية حيود الاشعة السينية (XRD) واوضحت نتائج تحليل حيود الاشعة السينية ان جميع العينات للمركبات المحضرة لها تركيب معيني متعامد المحاورويمتلك اطوارتركيبية رئيسية عالية ومنخفضة مع تغير ثوابت الشبيكة ونسبة c/a والكثافة الكتلية والنسب الطورية نتيجة لزيادة تركيز Sr . اما قياسات السطح فتمت باستخدام المجهر الالكتروني حيث اظهرت صور المجهر الالكتروني الماسح ان العينات لها ترتيب طبقي متجانس ثم ان زيادة تركيز Sr ادى الى تغير الاحجام الحبيبية .واشارت النتائج الى ان هناك زيادة في محتوى الاوكسجين نتيجة زيادة نسبة Sr المضافة للمركب من خلال الزيادة في محور c والذي بدوره يؤثر على مقدار Tc للمركب .اما المقاومة الكهربائية فتمت دراستها باستخدام تقنية الاقطاب الاربعة وتم ايجاد درجة الحرارة الحرجة Tc للمركبات الفائقة التوصيل من خلال منحنيات اعتماد المقاومية الكهربائية على درجة الحرارة وقد تبين ان اعلى نسبة درجة حرارة حرجة للمركب الفائق التوصيل Ba2 - xSrxCa2Cu3O7+δ Tcoff=140k وباستخدام مقياس ال LCR فقد تم قياس ثابت العزل الكهربائي كدالة للتردد ضمن المدى من 50Hz الى 1MHz في درجة حرارة الغرفة. وقد وجد ان زيادة تركيز Sr يؤدي الى تغير في ثابت العزل الكهربائي .اما بالنسبة للخصائص الفيزيائية فاوضحت النتائج ان زيادة نسبة Sr ادت الى زيادة في المسامية يقابلها نقصان في التقلص الحجمي والكثافة.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: دكتوراه
الموضوع الدقيق: الفيزياء
السنة: 2017
الموضوع العام: علوم الفيزياء
اسم المشرف: سوسن عبد الحسين مهدي
اسم المؤلف: حسين عبد الوهاب توفيق

ثابت العزل الكهربائي الفعال للسليكون العشوائي النقطي الكمي Effective Dielectric Constant of Amorphous Silicon Quantum Dots

المستخلص: تركز هذا العمل على دراسة الحسابات النظرية لثابت العزل الكهربائي للسليكون العشوائي ذو النقاط الكمية ولحجوم تتراوح من (1,8 - 4,8) نانوميتر. الحسابات النظرية اظهرت بان قيم ثابت العزل الكهربائي للنقاط الكمية من السليكون العشوائي قد انخفضت. اعتماد ثابت العزل الكهربائي على التردد الساقط تحقق في هذه الدراسة. التصغير لشبه الموصل الصلب وصولا الى المقياس النانوي يجعل التاثير الكمي اكثر اهمية. وكنتيجة لذلك فان فجوة الطاقة لشبه الموصل النانوي تتوسع, وتصبح هنالك ازاحة لمستويات اللب, وتعديل لعرض الحزمة كذلك ازدياد الانفصال بين المستويات الثانوية داخل الحزمة. الاخماد لثابت العزل الكهربائي ينشا من تعزيز الربط البلوري وارتباط الالكترون مع الفونون بسبب نقائص عدد الاحداثيات الذرية وارتفاع نسبة السطح الى الحجم مع انخفاض حجم الجسيم النانوي. الاخماد في قيمة ثابت العزل الكهربائي يقودنا الى الازاحة نحو الطاقات العالية في حافة الامتصاص الفوتوني وكذلك الانبعاث الفوتوني والتي نجد تطبيقاتها في النبائط المايكروالكترونية والفوتونية ذات المقاييس النانوية. وبواسطة هذه الحسابات فقد اعتمدنا فكرة التقييد الكمي, حيث ان فجوة الطاقة لشبه الموصل تتطابق مع حجم النقاط الكمية من السليكون العشوائي. التركيب للجسيم النانوي قسم الى ثلاث قشرات (طبقات) والتي هي طبقة السطح وطبقة السطح الثانوي وطبقة اللب, حيث ان طول الاصرة وطاقة الاصرة وعدد الاحداثيات تختلف باختلاف القشرات. الاصرة تنكمش وطاقتها تزداد في طبقة السطح اما في طبقة السطح الثانوي فان الاصرة تنكمش قليلا ولكن طاقتها لاتتغير بينما في طبقة اللب فان كلا من طول الاصرة وطاقتها هي نفسها كما لو كان الحجم غير نانوي, بالاضافة الى ذلك في هذا الانموذج نجد ان انكماش طول الاصرة وزيادة طاقتها يزداد مع زيادة النقص في عدد الاحداثيات الذرية. استخدم لحسابات هذه الدراسة الحقيبة البرامجية Mathcad Professional 2015. | In this work, theoretical calculations of amorphous silicon quantum dots of (1.8~4.8 nm ) have been studied. The presented calculations shows that the dielectric constant of amorphous silicon quantum dots are suppressed. The frequency dependence of the dielectric constant was investigated. When the solid is miniaturized, quantum effects become, significantly important. As a results, the bandgap of a nanosemiconductor is extensions, the core levels will be shifted, the revision to width for band, and increasing split of sublevel inside the band. Dielectric extinction arises from the promotion of the binding energy to crystal and e - p reaction owing to coordination number diminution and the high in proportion of surface into volume with reduction of the size to the particles. A reduction for dielectric tendency to the brinks for photo - absorption and photoemission are a blueshifted, that might found applications in micro - electronic and photonic devices build on nanometric gauge. With the suggested calculations, effect of quantum confinement was a doped, the bandgap for nanosemiconductor could be governed with the size of amorphous silicon quantum dots. The structure of the nanoparticles was classified into three shells, i.e., the surface, the subsurface and the core, where the bond length, bond energy and coordination number are different. Bonds contract and the energy increase in the surface shell. In the subsurface shell, the only bond contract with a little but the energy unchanged, whereas the bond length and the bond energy are remain the same as the bulk in the core of particle. In this model the bonds contract and the energy increase with the increasing of atomic coordination number imperfection. All the calculations made in this work have been done using Mathcad Professional 2015.
الصفحات الاولى:
مكان الجامعة: بغداد
اللغة: الانكليزية
الدرجة: دكتوراه
الموضوع الدقيق: الفيزياء
السنة: 2016
الموضوع العام: علوم الفيزياء
اسم المشرف: موفق كاظم عبد الرضا
اسم المؤلف: حسين خضير مجبل