عرض: 25 50 75 100 النتائج

نتائج البحث: 25 من أصل 311

دراسة الخصائص التحسسية لاغشية اوكسيد الخارصين والمحضرة بطريقة (ZnO : Al) المشوبة بالالمنيوم التبخير الحراري Study of the Sensing Properties of the Aluminum - Doped Zinc Oxide thin films Prepared by Thermal Vacuum Evaporation Technique

اسم المؤلف: مهند شاكر كشكول محمود ال شربه
اسم المشرف: ابراهيم رمضان عاكول
الموضوع العام: علوم الفيزياء
السنة: 2009
الموضوع الدقيق: الاغشية الرقيقة
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الكلمات الدلالية:
  • الخصائص التحسسية
  • اغشية اوكسيد الخارصين (ZnO : Al) المشوبة بالالمنيوم
  • متحسس كيميائي
الصفحات الاولى:
المستخلص: تم في هذا البحث دراسة الخصائص الكهربائية والتحسسية لاغشية (ZnO : Al) الرقيقة وبالنسب%(5,4,3,2,1) المحضرة بطريقة التبخير الحراري في الفراغ على قواعد زجاجية بدرجة حرارة الغرفة وبسمك (275±15)nm وبمعدل ترسيب (1.7±0.3nm/s) ومن ثم عانت جميع الاغشية اكسدة حرارية جافة بدرجةoC350 ولمدة ثلاث دقائق.تبين من خلال نتائج حيود الاشعة السينية (XRD) ان جميع اغشية(ZnO : Al) كانت ذات تركيب متعددة التبلورمع اتجاه تفضيلي هو(101) اكثر وضوحا من باقي الاتجاهات وذات تركيب سداسي (فورتزايت). ومعدل الحجم الحبيبي لاوكسيد الخارصين ZnO النقي (44.9nm)، التشويب بالالمنيوم ادى الى نقصان الحجم الحبيبي، اي تدهور التركيب البلوري ، يصل الحجم الحبيبي الى ادنى قيمة عند 3% ثم يقل تاثير التشويب بعدها,كما بين مخطط الحيود (XRD) لاغشية ZnO : Al وجود طورين للالومينا (Al2O3) هما α وδ تزداد نسبة تواجدهما مع زيادة نسبة التشويب. اظهرت القياسات الكهربائية ان التوصيلية الكهربائية المستمرة تزداد بزيادة نسبة التشويب حتى لتصل اقصى قيمة(Ω cm) - 1 144.875عند نسبة 3% ثم تبدا بالنقصان مع زيادة نسبة التشويب .وبينت القياسات ان الاغشية كافة تمتلك طاقتين للتنشيط (Ea1) و(Ea2) تزداد قيمتهما بزيادة نسبة التشويب، وتبين من خلال دراسة تاثير هول وتاثير سيباك ان جميع الاغشية هي من النوع السالب (n - type) .اما التحركية وكثافة الحاملات لاغشية (ZnO : Al) فقد ازدادتا مع ازدياد نسبة التشويب لتصل اقصى قيمة 59.39 cm2 V - 1s - 1 وcm - 3 1019×1.52 على التوالي عند نسبة تطعيم 3% بعدها بداتا تقل مع زيادة نسبة التشويب . تم تعريض العينات الى بخار الايثانول والميثانول وبدرجات تطبيقية مختلفة(30,40,و65 ) Co وبتسليط فولتية تتراوح (0 - 15) فولت, اظهرت القياسات التحسسية تحسس عالي لبخار الايثانول والميثانول عند تركيز 750ppm للبخار وكانت نسبة التشويب 3% هي الافضل دائما حيث سجلت اعلى قيمة للتحسس بلغت 73% عند درجة حرارة تطبيقية Co 30 تزداد لتصل 85% عند Top= 40 Co , في حين لم تظهر الاغشية تحسس لغاز(Co2 ) الا عند درجة حرارة (Co 205 ) وبتركيز ppm 1500 للغاز وبشكل ضعيف جدا بلغت نسبة التحسس 8% عند نسبة تشويب 3%, وكان التحسس معدوم بالنسبة لغاز (N2 ) وتبين ان التحسسية تتناسب عكسيا مع الحجم الحبيبي ,وطرديا مع درجة الحرارة التطبيقية ولمدى معين كما ان سرعة الاستجابة ومنحني (العودة ) يتحسن بشكل ضئيل مع زيادة درجة الحرارة. واظهرت النتائج عند تسليط فولتية خارجية خلال اخذ القياسات التحسسيةعلى الغشاء يزيد من تيار الخارج لكن في نفس الوقت تقل التحسسية . | In this work, electrical and sensing properties are investigated for Aluminum - doped Zinc Oxide thin films with different aluminum doping concentration (1,2,3,4 and 5%) prepared by thermal vacuum evaporation on glass substrate at (R.T) with (275±15)nm thickness deposition rate (1.7±0.3 nm/s) ,all films undergo dry thermal oxidation at (350 оC )for three minutes .The X - ray diffraction technique showed that all prepared films are polycrystalline with preferential orientation in the (101) direction. The peaks correspond to a hexagonal wurzite structure with the average grain size of pure ZnO (44.9nm) ,the doping resulted in decreasing grain size i.e deteriorates the crystallinity of the films until 3%doped.Other phases indicated from XRD were (δ) Al2O3.and(α) Al2O3 . Alumina concentration increased with increasing doping concentration. The grain size of ZnO : Al films is smaller compared to the grain size of ZnO films at same deposition parameters .The electrical properties showed the conductivity variation of Al - doped ZnO films with different doping concentrations first increase with increased Al concentrations. Maximum conductivity 144.875 (Ωcm) - 1 was obtained at a doping concentration of 3%, then the conductivity started to decrease significantly with increased in the Al doping concentration . Also, the doping affected the activation energy, by increasing it is value with increasing in doping concentration.The results obtained from Hall effect and Seebeck measurements have shown that ZnO : Al film is ( n - type ).The mobility of the ZnO : AI films increases with dopant concentration, and reaches maximum value of about 59.39 Cm2 V - 1 S - 1, at doping concentration 3%. Above 3% the mobility of the film decreases with increasing AI - concentration. The carrier concentration of the film increases with increasing dopant concentration, such behavior was expected, after a certain level of doping at 3%.The carrier concentration of the film decreases with increasing dopant concentration. Thin films specimens were examined for chemical sensing using vapor ethanol and methanol (at 30,40and65 оC) .The thin film surface exposed to 750 ppm vapor concentrations. The measuring, carried out with an applied voltage varied from (0 - 15) volts .The sensing measurements showed high sensitivity to ethanol and methanol. AZO 3% recorded the best result 73% for ethanol at operation temperature 30 оC increased to 85% at 40 оC.The sensitivity to CO2 was observed hardly of about 8% at 205 оC, and did not record any detection to N2 gas.The result showed that the sensitivity directly proportional with the operation temperature for limited range, and little improves response time and recover curve.Sensitivity is inversely proportional to the grain size and the applied voltage.

الخصائص الفيزيائية, الفعالية ضد البكتيريا والغشاء الحيوي لبوليمر بولي فينيل الكحولPVA مع صبغة السفرانين والبايوسورفكتنت Physical Properties, Antibacterial and antibiofilm Activities of PVA Polymer with Safranin Dye and Biosurfactant

اسم المؤلف: مهند سامي جليل
اسم المشرف: محاسن فاضل هادي الكاظمي جيهان عبد الستار سلمان
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم تحضير الاغشية بطريقة الصب لعدة اوزان ( 0.25، 0.5، 0.75، 1) غرام ولعدة اوزان جزيئية (14000،160000) غم \مول من بوليمر بولي فينيل الكحول وايضا لعدة نسب خلط من صبغة السفرانين (4، 8، 10، 12، 16، 20 ) مل ولعدة تراكيز (1×10 - 2، 1 ×10 - 3، 1× 10 - 4، 0.5×10 - 4، 1×10 - 5، 1×10 - 6 ) مول\لتر. تم دراسة الخصائص الفيزيائية والفعالية ضد البكتيرية لصبغة السفرانين، بوليمر بولي فينيل الكحول، بايوسرفكتنت واغشية (صبغة السفرانين، بايوسرفكتنت) المذابة في البوليمر. ايضا تم دراسة تاثير تغيير (الوزن والوزن الجزيئي لبولي فينيل الكحول، التركيز لصبغة السفرانين وتاثير نسبة الخلط لصبغة السفرانين \ بولي فينيل الكحول) على الخصائص الفيزيائية الضوئية والخصائص التركيبية. اختبارات الخصائص الفيزيائية الضوئية تتضمن اطياف الامتصاص والفلورة، فجوة الطاقة والثوابت البصرية . اختبارات الخصائص التركيبة لبوليمربولي فينيل الكحول، صبغة السفرانين واغشية سفرانين \ بولي فينيل الكحول تمت بعده طرق هي ( حيود الاشعة السينية XRD ، مجهر القوة الذرية AFM ، مجهر المسح الالكتروني(SEM) ، وتحويلات فورير للاشعة تحت الحمراء FTIR النتائج المتحققة توضح بان شدة اطياف الامتصاص والفلورة تزداد بزيادة تركيز صبغة السفرانين .تم حساب فجوة الطاقة لصبغة السفرانين وبولي فينيل الكحول ومقارنتها مع اغشية الصبغة المذابة في البوليمر وقد بينت النتائج الى نقصان فجوة الطاقة للصبغة والبوليمر بعد مزجهما مع بعض، كما ان فجوة الطاقة لاغشية السفرانين المذابة في البوليمر تقل بزيادة نسبة الخلط لصبغة السفرانين. تم دراسة كل الثوابت البصرية (معامل الامتصاص، معامل الخمود، معامل الانكسار، وثابت العزل الحقيقي والخيالي ).تم حساب معاملات الفلورة لكل النماذج وتبين بان افضل نتيجة لزمن العمر وزمن العمر الاشعاعي لصبغة السفرانين كانت عند التركيز( 0.5×10 - 4) مول \لتر في حين للاغشية الصبغة المذابة في البوليمر كانت عند نسبة الخلط 12 مل للصبغة وللوزن الجزيئي 14000 غم \ مول للبوليمر ونسبة خلط 4 مل للصبغة وللوزن الجزيئي 160000 غم \مول.تم اختبار الفعالية ضذ البكتيرية وضد الاغشية الحيوية لصبغة السفرانين، البايوسرفكتنت، بوليمر بولي فينيل الكحول واغشية ( صبغة السفرانين، بايوسرفكتنت) \ بولي فينيل الكحول لعدة اوزان جزيئية لبولي فينيل الكحول وعدة اوقات تجفيف وعدة بكتريا مرضية (Staphylococcus aureus and Pseudomonas aeruginosa ) ولنوعين من الاطباق ( بلاستك وزجاج ). ان افضل النتائج المتحققة كانت للبايوسرفكتنت المذاب في البوليمر والمصبوب للنوعين من الاطباق وللنوعين من البكتريا, بالنسبة للبكتيريا (Staphylococcus aureus) حصلنا على النتائج (98.70%,100.00%,) للاطباق البلاستك والزجاج على التوالي وللوزن الجزيئي 14000 غم\مول اما بالنسبة للبكتريا (Pseudomonas aeruginosa) حصلنا على النتائج (98.00% و97.70%) للاطباق البلاستك والزجاج على التوالي وللوزن الجزيئي 160000 غم \ مول | Films were prepared by casting method with different weights (0.25,0.5,0.75,1) g and different molecular weights (14000,160000) g/mol of PVA polymer and different doping ratio of Safranin dye (4,8,10,12,16,20) ml and different concentration (1x10 - 4,0.5x10 - 4,1x10 - 5,1x10 - 6) g/mol.The physical properties, antibacterial activity and antibiofilm of Safranin dye, polyvinyl alcohol (PVA) films, Biosurfactant and Safranin dye doped PVA films have been studied. Also study the effect of changing (the weights and molecular weights of PVA, the concentration of Safranin and doping ratio of Safranin dye doped in PVA films ) on photophysical and structural properties.Photophysical properties tests are including the parameters : - Absorption and fluorescence spectra, energy gap, and optical constants. Structural properties tests are investigate by methods (XRD, AFM, SEM and FTIR spectrum) for PVA polymer films, Safranin dye as solution and Safranin / PVA films. The achieved results illustrated that the intensity of absorption and fluorescence spectra of Safranin dye are increase as concentration increase. The energy gap for Safranin dye and PVA polymer has been calculated and compared with Safranin doped PVA polymer films that led to decrease energy gap of dye and polymer after doping together, the energy gap of Safranin / PVA films are decreasing as increasing doping ratio of Safranin. All optical constants (absorption coefficient, extinction coefficient, refractive index and real and imaginary dielectric constant) were studied.Fluorescence parameters for all samples will be calculated. The best lifetime and radiative lifetime for Safranin dye is for concentration 0.5x10 - 4 mol/liter while for Safranin dye doped PVA films is for 12 ml doping ratio for PVA Mw 14000 g/mol and 4ml doping ratio for PVA Mw 160000 g/mol .Antibacterial and Antibiofilm activity were tested for Safranin dye, Biosurfactant, PVA polymer and (Safranin, Biosurfactant / PVA ) films for different molecular weights of PVA, different drying time, different pathogenic bacteria (Staphylococcus aureus and Pseudomonas aeruginosa ) and different kind of plates ( plastic and glass). The best results achieved from the mixture Biosurfactant doped PVA casting in both Plates and for both pathogenic bacteria, the results for Staphylococcus aureus are (100.00%, 98.70%) for plastic and glass plates respectively and for molecular weight (14000 g/mol), while the results for Pseudomonas aeruginosa (98.00%, 97.70% ) for plastic and glass plates respectively and for molecular weight (160000 g/mol)

تحضير مركب من (النحاس - الكرافيت) ودراسة خواصه الكهربائية والميكانيكية والحرارية (Copper - Graphite) composite preparation and studying it's electrical, mechanical and thermal properties.

اسم المؤلف: مهدي محمود مطر
اسم المشرف: فاضل عطية جياد ابراهيم رمضان عاكول
الموضوع العام: علوم الفيزياء
السنة: 2010
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا العمل, تم تحضير مادة متراكبه من النحاس والكرافيت باستخدام طريقة مسحوق المعادن (powder metallurgy method) وتم دراسة خواصها الفيزياويه والميكانيكيه والكهربائيه والحراريه.نسب مختلفه من الكرافيت كانت (40%,30%,20%,10%,5%) تم اضافتها الى مسحوق النحاس,كل النسب خلطت بعنايه مع (2%) من وزن المركب مع بولي فينول الكحول (polyvinyl Alcohol) كرابط.النماذج شكلت على شكل عينات دائريه ,ثم كبست تحت ضغط (55) ميكا باسكال ومن ثم عولجت حراريا بعد وضعها في انابيب من الكوارتز مفرغه حيث وضعت في فرن بدرجة حراره (900) درجة مؤية لمدة (4) ساعات حيث كان معدل درجة التسخين والتبريد هي (4.5) درجة مؤية لكل دقيقة .الكثافة الحجمية(Bulk density ) ) والفجوات الضاهرية(Apparent porosity) ومقاومة البلي(Wear rate ) ومعامل الاحتكاك(Friction coefficient ) والممانعه الكهربائيه(electrical resistivity) والتوصيليه الحراريه(thermal conductivity) درست.حيث كانت الكثافة الحجمية (3.24 - 6.1)غرام لكل سنتميتر مكعب لكل النسب من الكرافيت والفجوات الضاهرية (13.816 - 8.768) غرام لكل سنتميتر مكعب وكذلك معدل البلي لمختلف الاحمال (5,10,15) نيوتن كان يقل مع زيادة محتوى الكرافيت في المركب حيث كان معدل البلي (2.91x10 - 7 - 0.9x10 - 7) غرام لكل سنتميتر عند مسافه (6) سنتميتر لكل نسب الكرافيت وكذلك معامل الاحتكاك (0.562 - 0.590) ,الممانعة الكهربائية كانت (108x10 - 3 - 80x10 - 3) اوم لكل متر والتوصيليه الحرارية كانت (116.41 - 131) وات لكل كلفن متر لكل نسب الكرافيت.العينه (10%)كرافيت اختيرت افضل نموذج حيث كانت الفجوات الضاهرية لها (10.024) غرام لكل سنتميتر مكعب والكثافة الحجمية (5.13) غرام لكل سنتميتر مكعب ومعامل الاحتكاك (0.580) ومعدل البلي(2.58x10 - 7) ) غرام لكل سنتميتر عند حمل (15)نيوتن وممانعة كهربائية (80.2x10 - 3) اوم لكل متر وتوصيلية حرارية (128.37) وات لكل كلفن متر .مواد مختلفة مثل سليكون الكاربيد(SiC) واوكسيد اليثانيوم(( La2O3 ومسحوق الكالين(Kaolin) استخدمت كمواد تطعيم بنسب مختلفة اضيفت الى العينة (10%) كرافيت ودرس تاثيرها على خواص المركب حيث كان معدل البلي قد تحسن حيث اصبح (0.65x10 - 7) غرام لكل سنتميتر لعينة سليكون الكاربيد(SiC) (2.5%) وكذلك الصلادة ازدادت, (1%) من واوكسيد اليثانيوم(( La2O3 قللت معدل البلي الى (1.72x10 - 7) غرام لكل سنتميتروكذلك الصلادة ازدادت ,اضافة نسب مختلفة من الكالين الى المركب وخصوصا النسبة (5%) قد حسنت معدل البلي حيث وصل الى (2x10 - 7) غرام لكل سنتميتر مع زيادة للصلادة ايضا.معدل البلي ومعامل الاحتكاك درست باستخدام تقنية (pin - on - disk) حيث استخدمت ثلاثة احمال هي (5,10,15) نيوتن وعلى ثلاث مسافات هي (4,6,10) سنتمتر, بصورة عامه النتائج اظهرت ان معدل البلي يزداد مع زيادة الاحمال والمسافات | In the present work, copper - graphite composite is prepared by powder metallurgy method P/M, and studying their physical, mechanical, electrical and thermal properties.Different percentages of graphite (40 wt%, 30 wt%, 20 wt%, 10 wt% and 5 wt%) have been added to copper powder. Each percentage mixed carefully with (2) wt% of polyvinyl Alcohol (PVA) as a binder.Many samples as a disc have been compacted at (55) MPa, and then sintered in evacuated quartz tube at (900)oC for (4) hours where the heating and cooling was (4.5)oC per min. Bulk density, apparent porosity, wear resistance, friction coefficient, electrical resistivity and thermal conductivity of the composite have been study. Where the bulk density (3.24 - 6.1)gm/cm3 for all the percentage of graphite, and the apparent porosity was (13.816 - 8.768) gm/cm3 and wear rate at difference load (5,10 and 15)decreased with increasing graphite content, where the rate (2.91x10 - 7 - 0.9x10 - 7)gm/cm at distance (6)cm for all the percentage of graphite and friction coefficient was (0.562 - 0.590), electrical resistivity was (108x10 - 3 - 80x10 - 3)ohm. m, and thermal conductivity (116.41 - 131) w/k.m for all percentage of graphite.10 wt% graphite composite has chosen a best of samples where the apparent porosity was (10.024) gm/cm3 and bulk density (5.13) gm/cm3 and friction coefficient (0.586) and wear rate (2.58x10 - 7) gm/cm at (15)N as a load, and resistivity (80.2x10 - 3) ohm .m and thermal conductivity (128.37) w/k.m.Different materials such as SiC, La2O3 and Kaolin have been used as doping materials in different percentages to best sample prepared (10 wt% graphite) and studying their effect on the properties of this composite. The wear rate has been enhanced where it becomes (0.65x10 - 7) gm/cm for (2.5 wt% SiC) and the hardness has been increased. (1 wt% La2O3 ) has also decreased the wear rate to (1.72x10 - 7) gm/cm with increasing the hardness of the samples. Adding different percentage of kaolin to the composite specially (5 wt %) has enhanced also the wear rate where reach to (2x10 - 7) gm/cm and hardness increasing too. Wear rate and friction coefficient studying under dry sliding condition using pin - on - disk technique. Three loads (5, 10 and 15) N, where used at different distance effect (4, 6 and 10) cm from the center of disk. In general the results showed that the wear rate is increased with increasing the applied load and increased the distance

تحليل التزامن لمنظومة اتصالات ضوئية تستخدم ليزر دايود معرض لتغذية ضوئية رجعية مزدوجة Analysis of synchronization for an optical communication system using a laser diode subjected to double optical feedback

اسم المؤلف: منتظر جواد خضير الطائي
اسم المشرف: فراس صبيح محمد
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الالياف الضوئية
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ان ليزر اشباه الموصلات الخاضع للتغذية الضوئية الرجعية يمكن ان يولد اشارة فوضوية ذات ابعاد كبيرة تستخدم بتطبيقات الانتقال الامن للمعلومات في الاتصالات الضوئية. التغذية الضوئية الرجعية ممكن ان تسبب تغيرات كبيرة في خصائص الليزر، مثل تيار العتبة، والكفاءة التفاضلية، خرج الطاقة وخط الطيف.اضطراب ليزر اشباه الموصلات يوفر تقنية مفيدة جدا ، ما يسمى الاتصالات الفوضوية. والفكرة هي ببساطة تحميل (ترميز) الرسالة المرسلة على الموجة الفوضوية واستخراجها حين وصولها الى (المستلم) اذا حصل التزامن بينه وبين (المرسل). في رسالة الماجستير هذه ، نقوم بدراسة السلوك الديناميكي غير الخطي في ليزر اشباه الموصلات ذي التكوين (المسيطر - التابع) في منظومات الاتصالات الامنة. سيتم تحقيق الهدف من هذا البحث عن طريق دراسة نوعية تزامن منظومات ليزر اشباه الموصلات ذات الحلقة - المفتوحة والحلقة - المغلقة, من خلال تقييم تاثير المعاملات المؤثرة على هذه المنظومات, مثل زمن التغذية الضوئية الرجعية , زمن الحقن الضوئي, وقوتي التغذية الضوئية الرجعية والحقن الضوئي.تم دراسة تاثير قوة التغذية الضوئية الرجعية المزدوجة والحقن الضوئي في منظومة الحلقة المفتوحة. وقد اظهرت النتائج عدم الترابط او الترابط الجزئي بين الليزران لاغلب القيم, كما تصبح خريطة التزامن بشكل سحابة نقطية (عدم وجود ارتباط بين خرجي اليزر المسيطروالتابع) او خط تزامن متقطع. لكن يمكن ان مشاهدة نوعية التزامن الممتازة بشكل واضح عندما تكون قيم العوامل المؤثرة ( kf = 0.14 وkinj =0.28) وتثبيت قيم τf ) وτ ) عند (1ns) . في حين ان تاثير تغير قيم τf ) وτ ) في منظومة الحلقة - المفتوحة اظهر ان ا افضل نتيجة حصلنا عليها كانت عند (kf = 0.14 , ( kinj =0.28 و) τf ,τ =1.6 ns (. حيث ظهر خط تزامن مستمر تقريبا مع غيمة من نقاط قليلة متفرقة ووجود اختلاف قليل في كثافة الحاملات لليزر المرسل والمستلم. النتائج الحسابية اظهرت ان المنظومة الضوئية يمكن ان تكون اكثر استقرارا من خلال استخدام الليزر المستلم مع نظام التغذية الضوئية الرجعية ذي الحلقة - المغلقة من خلال ظهور خطوط تزامن مستمرة وتطابق كثافة الحاملات لليزر المرسل والمستلم . وهذا يدل على امكانية تحسين نوعية التزامن باستخدام التغذية الضوئية الرجعية مع كلا الليزران المرسل والمستلم. من ناحية المنظور التطبيقي للاتصالات الفوضوية المشفرة تعد النتائج التي حصلنا عليها مهمة لتحديد ظروف التشغيل الافضل وتقييم محددات اداء منظومات التغذية الضوئية الرجعية التي تعتمد على ترابط التزامن بين الليزران. | In semiconductor lasers, chaos has offered a very useful technology, the so - called chaotic communication. The idea is simply to carry (encode) the transmitted message on a chaotic waveform and decode it on the receiver if the latter is synchronized to the transmitter .The aim of this work is to be achieved by numerical study of the synchronization quality of open - loop and close - loop Semiconductor Laser systems through assessing the effect of the variable parameters that affect these systems. Such as, optical feedback time( τ ), optical injection time (τf) optical feedback strength( kf ) and optical injection strength (king) The effect of optical injection and double optical feedback strength in open - loop system are studied. The results show the two lasers are decoupled or partially coupled for the most values as the synchronization map becomes a cloud of points (no correlation between master laser ( ML) and slave laser (SL) outputs) or discrete diagonal line. But, It can be clearly seen excellent synchronization quality when (kf = 0.14and kinj =0.28) while keeping (τ and τf ) fixed at (1ns). While under the the effect of varing τ and τf in open - loop scheme. The best result was when kf = 0.14, kinj = 0.28,  =2 ns and f = 2 ns that shows semi - continuous diagonal line accompany with a few cloud of points and short mismatch in the carriers density correlation for the transmitter and receiver. The numerical results have founds that the system can be more stabilized by utilized a feedback loop at the slave diode in close - loop system. It is evident that the synchronization quality improves by using feedback loop on both lasers. From the perspective of applications in chaos communications and cryptography, our results will be helpful to determine optimal operating conditions and estimate performance limitations of optical feedback schemes based on synchronization of coupled lasers

تاثيرات اشعة الليزر العلاجي واطئ القدرة على الخلايا الطبيعية والسرطانية من خلال تشعيع الغدة اللمفاوية للفئران

اسم المؤلف: مصطفى صالح علي الموسوي
اسم المشرف: تقي علي موسى الموسوي الواجدي ناهي يوسف ياسين
الموضوع العام: علوم الفيزياء
السنة: 2010
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ان تقنية التشعيع باستخدام الليزر واطئ القدرة Diode Laser ذي الاطوال الموجية المختلفة له القابلية على احداث تغييرات بايولوجية وذلك من خلال انتقال طاقة الفوتون الى النظام البايولوجي المستهدف، وبسبب الاهتمام بموضوع تاثيرات اشعة الليزر المستخدمة في العلاج الطبي فان تاثير ضوء الليزر ذي القدرة الواطئة على نشاط الخلايا المناعية تمت دراسته على الخلايا المناعية المميزة (macrophages and T cells) في نماذج حيوانية. وان جميع التجارب المتعلقة بالبحث قد انجزت في المركز العراقي لبحوث السرطان والوراثة الطبية التابع للجامعة المستنصرية.تم فحص 180 نموذج من اناث الفئران البيضاء بعمر شهرين وذات معدل وزن 25± 5 غم في هذا البحث، وطبقا لبروتوكول العلاج بالليزر تم تقسيم الفئران الى مجموعتين، المجموعة السليمة (90 (n= والمجموعة المصابة بسرطان الغدة اللبنية((AM3 (90 (n=. تم تشعيع الغدد اللمفاوية العنقية ل75 فارة من كل مجموعة باستخدام ليزر القدرة الواطئة ذي الاطوال الموجية (830,780,670,635,532) نانومتر. كل خمس عشرة فارة من كل مجموعة قد تم تشعيعها من احد تلك الليزرات بواسطة توجيه حزمة الليزر الى الغدد اللمفاوية لتلك الفئران مرتين في اليوم الواحد لمدة 20 دقيقة وللفترات 5، 10، 15، 20 ،25 يوم على التوالي، بينما لم يتم تشعيع مجموعة اخرى مكونة من 30فارة وذلك لاستخدامها لاغراض المقارنة مع المجاميع المشععة وللفترات الزمنية نفسها. في نهاية التجربة، تم قتل جميع الفئران بعد نهاية الفترات 5، 10، 15، 20 ،25 يوم على التوالي، لاجراء التشريح وازالة الغدد اللمفاوية بهدف اجراء الفحص النسيجي واستخدام طريقة الفحص الكيميائي النسيجي المناعي (IHC)، CD3) و(F4/80 لدراسة تاثيرات الليزر على الخلايا المناعية التي يمكن تحفيزها لتحسين وظيفة الغدة اللمفاوية بهدف زيادة استجابة الجهاز المناعي، وبعدها يتم فحص العينات تحت المجهر الضوئي.من خلال تحليل النتائج التي تم الحصول عليها في هذا البحث، وجد ان الاطوال الموجية المختلفة للليزرات القدرة الواطئة يحفز خلايا الجهاز المناعي. ان تشعيع الخلايا المناعية باستخدام ليزر واطئ القدرة كان مصحوبا بتثبيط معنوي ملحوظ في نمو الورم وكانت اغلب الملاحظات عند الاطوال الموحية 635,670 نانوميتر.الخلاصة________________________________________ان معدل زيادة نسبة T cell (في الفئران الطبيعية) في اليوم الخامس والعشرين من فترة التشعيع هي 30% فقط، بينما كان معدل الزيادة في نفس هذا النوع من الخلايا وبوجود الخلايا السرطانية 107%. وان معدل الزيادة في نسبة خلايا (macrophages) في الفئران الطبيعية في اليوم الخامس والعشرون من فترة التشعيع بالليزر ذو الطول الموجي 635 نانومتر233% والتي تقارب بنسبة كبيره لمعدل الزيادة 237% في نفس هذا النوع من الخلايا وبوجود الخلايا السرطانية .ان تاثير الليزر ذي الاطوال الموجية 635 و670 نانومتر لازال واضحا على حجم الورم للفئران المسرطنة. في اليوم الخامس من التشعيع فان الليزر ذا الطول الموجي 635نانومتر فقط قادر على ان يسبب تثبيط معنوي ملحوظ (p<0.05 ) في حجم الورم، بينما في ايام التشعيع 10، 15، 20 فقط الليزرات ذات الاطوال الموجية 635 و670نانومتر قادرة على ان تسبب تثبيط معنوي ملحوظ في حجم الورم للفئران المسرطنة المشععة. ان الليزر ذا الطول الموجي 635 نانومتر كان له التاثير الاعظم على تثبيط حجم الورم للفئران المسرطنة اذا ما تمت مقارنته مع بقية الاطوال الموجية للفئات العمرية المختلفة.نستنتج من هذه الدراسة ان تحفيز الغدة اللمفاوية يعتمد على نوع الليزر المستخدم، حيث ان هناك علاقة بين الطول الموجي لليزر المستخدم مع زيادة عدد الخلايا المناعية عندما تكون الجرعة الاشعاعية متساوية لجميع الاطوال الموجية | Low level diode laser of different wavelengths is an irradiation technique that has the ability to induce biological changes by transferring the photon energy to the targeted biological system, because of the large interest in the field biological effects of laser radiation used in laser therapy, the effect of extremely low - level laser light intensity on the immune cell activity has been studied in the animal model with well - characterized macrophages and T cells. All the experiments of this study were performed in the laboratories of the Iraqi center for cancer and medical genetics research (ICCMGR). A total number of 180 female white mice of two months age and mean weight of 25 ± 5 g were examined in this project. According to the laser treatment protocol the mice were divided into two groups, normal (n=90) and adenocarcenoma inoculation (n= 90). The cervical lymph nodes of only 75 mice of each group were irradiated by different wavelengths LLL (532, 635, 670, 780, and 830) nm. Each of the 15 mice were irradiated by one of these lasers by directing the laser beam to the mice lymph node for 20 mins for a period of 5,10,15,20 and 25 days. This was done twice daily. While the other 30 mice were not irradiated to use them for comparison study with the irradiated groups for the same mentioned periods of time. At the end of the experiment, the animals were killed. Each mouse was fixed on the back of anatomical slab. The specimen (lymph node) after removal were taken for histo - pathology exam and the immunohistochemistry (IHC) method (markers CD3 and F4/80) was used to study the effects of lasers on the macrophages and T lymphocyte cells which can be stimulated in order to enhance the lymph node function, and as a Abstract________________________________________result, enhance the immune system response. Then, the slides were examined microscopically. Through the analysis of the data obtained from this study, it was found that different wavelengths LLL stimulated the immune cells (T and Macrophages), the irradiation of these cells with LLL was associated with a remarkable and significant growth inhibition most noticeably at laser wavelengths of 635 and 670 nm. The average increase in the percentage of T cells (in healthy mice) at the 25th day of exposure to 635 nm laser light was only 30% while the average increase of such cells in the presence of cancer cells was 107%. In contrast, the average increase in the percentage of macrophages (in healthy mice) at the 25th day of exposure to 635 nm laser light was 233% which was very close to the average increase (237%) in the presence of cancer cells. The effect of the laser wavelengths of 635 and 670 nm was still obvious on the tumor volume of cancerous mice. At the fifth irradiation day, the only laser wavelength of 635nm was able to cause a noticeable significant (p<0.05) decrease of tumor volume of the irradiated cancerous mice. While at the exposure days 10, 15 and 20 the only two laser wavelengths of 635 and 670 nm were able to cause a noticeable significant decrease of the tumor volume of the irradiated cancerous mice. The laser wavelength of 635 nm has the maximum significant decrease of tumor volume of cancerous mice in comparison with irradiation of other laser wavelengths at different age groups. As a conclusion for this study, stimulation of lymph node depends on the kind of the used laser. There was a relationship between the used laser wavelength and the increment in the number of the T - cells and Macrophages when the laser dose was uniform for all wavelengths.

الرنين التنفقي في تركيب الشبيكة الفائقة نوع GaAs/ AlGaAs Resonance Tunneling in GaAs/AlGaAs Superlattice Structure

اسم المؤلف: مروى نجيب نجم الدين عبد الله
اسم المشرف: موفق كاظم عبد الرضا ابراهيم رمضان عاكول
الموضوع العام: علوم الفيزياء
السنة: 2006
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الاطروحة قدمت دراسة نظرية حول التنفق الرنيني في تركيب الوصلة الغير متجانسة للشبيكة الفائقة من .GaAs/Al0.3Ga0.7Asفقد قمنا بتحليل الحل العددي المضبوط والبسيط لمعادلة شرودنجر غير المعتمدة على الزمن ذات البعد الواحد لمسالة البئر الكمي. لذا يمكن حساب جميع مستويات الطاقة المقيدة وشبه المقيدة وكذلك دوالها الموجية للشكل الاعتباطي لمظهر الجهد. ان التنفق الرنيني لنظام متعدد الحواجز قد تم بحثه باستخدام تقنية مصفوفة النقل (التحويل). لقد اشتقت علاقة عامل النفوذية من خلال استخدام هذه التقنية (تقنية مصفوفة التحويل) مع دراسة جميع الاحتمالات في تغير عرض كل من الحاجز والبئر بالاضافة الى تغير عدد الحواجز. وقد استخرجت الطاقات الرنينية من العلاقة البيانية التي تربط عامل النفوذية وطاقة الجسيمات الساقطة على الحاجز عند الاخذ بنظر الاعتبار قيمة عامل النفوذية مقترب الى الواحد ولمختلف ابعاد الحاجز والبئر وعدد الحواجز. وفيما يتعلق بزمن عمر التنفق الرنيني للنظام من الممكن شرحه كيفيا (سلوكيا) من خلال مبدا الللادقة لهايزنبرك حيث تتناسب Δε عكسيا مع زمن عمر المستويات الطاقية (Γ) الموجودة في البئر الكمي. فالالكترونات ذات المستويات الطاقية العليا في البئر الكمي لها ان تنتفق عبر الحواجز الفعالة الواطئة ولهذا يكون لهزامن عمر قصير. جميع هذا العمل قد تركز بصورة خاصة على مبدا التقيد المكاني (الفضائي) لتاثيرات التكمم الطاقي. واظهرت نتائج هذا العمل بانها ليس فقط تضئ المفهوم الفيزيائي لفكرة التنفق الرنيني في تركيب الحاجز الكهربائي بل انها تعدت ذلك الى كيفية تصميم النبائط الكمية اللالكترونية والمستندة على تراكيب التنفق المتعدد الحواجز. ان جميع الحسابات في هذه الدراسة قد استندت على استخدام الحقيقة البرنامجية نوع (Mathcad Professional 14.0 2007). | In this thesis, a theoretical study of resonant tunneling in superlattice GaAs/Al0.3Ga0.7As structure is presented. We have analyzed a simple and accurate numerically solving the one - dimensional time - independent Schrödinger equation in quantum well (QW). One can thus calculate all bound and quasi - bound energy levels and the corresponding wave function for an arbitrarily shaped potential profile. Resonant tunneling in multi barrier is investigated by using transfer matrix technique. The formula for the transmission coefficient is derived from the same technique and then varying in the barriers and wells width and barriers numbers to find their effect on the transmission coefficient. The resonant energies are found from the curve between T vs. ε when taking into the account the condition T≈1; and its dependence on the barrier and well width for different barrier numbers are analyzed. Resonant tunneling life time for the investigated system can be qualitatively explained by the Heisenberg uncertainty principle since Δ ε should be inversely proportional to the lifetime (Γ) of the states in the well. Electrons at higher levels in the well have to tunnel through lower effective barriers and should therefore have a shorter (Γ). Thus all of the work in this area has focused almost exclusively on spatial confinement of energy quantization effects. The results shown in this work not only shed new light on the physics of resonant tunneling in electric barrier structure but are also helpful in designing quantum devices based on multi barrier tunneling structures. The program, which has been used for all the calculations in this work, is Mathcad Professional 14.0 2007 software

تصميم وبناء منظومة الترسيب البخاري الكيميائي لتحضير انابيب الكاربون النانوية لاغراض المتحسسات الغازية Design and Construction of CVD System for Synthesis Carbon Nanotube for Gas Sensing

اسم المؤلف: محمد عودة داود
اسم المشرف: عبد القادر داود فيصل كاظم حسن حسين
الموضوع العام: علوم الفيزياء
السنة: 2013
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا البحث، قمنا بتحضير اغشية رقيقة نانوية كعوامل محفزة لانماء انابيب الكاربون النانوية CNTs. استخدمت طريقتين لتحضير الاغشية : الاولى هي طريقة الطلاء البرمي spin coatingوالاخرى هي طريقة الترذيذ ثنائي القطب Diode Sputtering . العوامل المحفز catalystsرسبت على قواعد السيليكون المؤكسدة SiO2 نوع p(100) وبابعاد ×1)cm 1( وكذلك الواح زجاج الكوارتز (1×1)cm . استخدم جهاز AFM لمعرفة طوبوغرافية السطح. التركيب السطحي للاغشية المرسبة كان تركيبا نانويا ومعدل خشونة السطح كان في المدى (0.24 - 0.76)nm ومعدل الحدود الحبيبية يقع ضمن المدى (1.1 - 1.76)nm . لقد وجد ان معدل خشونة السطح يزداد مع زيادة التركيزالمولاري للمادة FeCl3 في حالة التحضير بطريقة الدوران وخشونة السطح بزيادة زمن الترسيب في حالة الترذيذ بالبلازما. لقد بنينا منظومة ترسيب بالبخار الكيميائي CVD مصنوعة محليا لانماء انابيب الكاربون النانوية على اغشية محفزة محضرة مسبقا. في كل التجارب استخدم غاز الاستيلين C2H2 وغاز النتروجين N2 وبمستوى نقاوة عالية وبمعدل جريان sccm (15/85) للغازين ( (C2H2/N2 على الترتيب. اظهر المجهر الالكتروني الماسح ان الانابيب النانوية المحضرة بهذه الطريقة تمتلك اقطارا بحدود (20 - 80)nm وتمتلك كثافة عالية في بعضها ويصل سمكها الى حدود 50µm وان ميكانيكية الانماء لهذه الانابيب النانوية هي باتجاه عمودي على سطح القاعدة مع وجود التواء بالشكل. حيود الاشعة السينية X - Ray اظهران قمة الاعرض تتمركز حول المستوي (002) وعند 2ϴ=24.970 وتحفز بسبب عدم انتظامية الكاربون ويشير ذلك الى وجود درجة من العيوب داخل التركيب الذري للكاربون وكذلك وجود القمة للمستوي (100) عند 2ϴ=43.20 يشير الى وجود نوعية واطئة لمادة الكاربون النانوية. استخدم طيف رامان لبيان ان طيف التركيب الكاربوني يحتوي على حزمتين رئيسيتين : هما الحزمة G عند ((1596cm - 1 لحالة MWCNTs وتشير الى نمط استطالة الاصرة (sp2) الذي يتبع تركيب الكرافيت المرتب جيدا والثانية الحزمة D عند الطي ) (1306cm - 1 والتي تعزى الى استطالة الاصرة (sp3) الناتجة عن وجود اضطراب بالتركيب لوجود عيوب الشبيكة بتركيب الكاربون. فحوصات المجهر الالكتروني النافذ استخدمت لاثبات انابيب الكاربون النانوية من النوع متعدد الجدران MWCNTs وكذلك وجود خندق اجوف يفصل بين حزمتي الجدران حيث كان معدل الاقطار بحدود (80nm) وكذلك اظهرت الصور وجود ذرات الحديد النانوية عند قمة الانابيب وهذا يؤكد ان الانماء الراسي هو السائد. بنيت منظومة متحسس غازي مصنعة محليا لفحص عينات CNT واستخدامها كمتحسس غازي لغاز الايثانول . النتائج اظهرت قيم التحسسية (26, 37, 42, 39, 40) للتراكيز (100, 200, 400, 600, 800) جزء لكل مليون لتراكيب الكاربون النانوي المتعدد الجدران المرسب على عوامل محفزة محضرة بطريقة الترذيذ بالبلازما واظهرت قيم تحسسية (24, 11, 12, 20, 21) لتراكيب الكاربون المتعدد الجدران المرسبة على عوامل محفزة محضرة بطريقة الطلاء البرمي. جميع القياسات الخاصة بالمتحسس الغازي اجريت في درجة حرارة الغرفة. | In this work, we have prepared nano thin films as catalysts to grow CNTs. Two ways used to prepare the catalysts : the first was the Spin Coating and another one was Diode Sputtering. The catalysts were deposited on p/100/SiO2 (1×1) cm2 and on slides of quartz with dimensions (1×1) cm. The Atomic Force Microscope was employed to know the surface topography. The surface structure of the deposited films was nanostructure and the average roughness scales from 0.24 nm to 0.76 nm and the average value of the grain size ranges from (1.1 nm) to (1.76 nm). It was found that the surface roughness increased with increased concentration of FeCl3 in the case of spin coating and increased with increasing deposition time in case of the diode sputtering. We have constructed of a homemade (CVD) system to grow CNTs on catalyst that ready earlier. In all experimental, C2H2 and N2 that high - level purity with flow (15/85) sccm (C2H2 / N2) were used respectively. Scanning Electron Microscope showed that the nanotubes synthesized with this method has diameters about between (20 and 80) nm and the highest nanotube densities and film thicknesses of about (50µm) and the growth mechanism of the nanotubes are oriented perpendicular to the substrate surface with a curly shape. X - Ray diffraction show the wider peak of (002) centered at (2ϴ=24.97o) is induced by the disordered carbon and indicates to presence defect level in the atomic carbon structure and the peaks at (2ϴ=43.2o) for (100) plane indication of the low quality of carbon nano materials. Raman Spectroscopy was used to show the spectrum of the spectrum of CNT structure contains two main bands : the G - band (1596cm - 1 for MWCNTs), which is assigned to the (sp2 bonded) stretching mode of a well - ordered graphitic structure and the D - band (1306cm - 1 for MWCNT), attributed to the (sp3 bonded) stretching mode, resulting from the presence of a disordered structure or lattice defects in the graphite structure. Transmittance Electron Microscope was employed to confirm that the carbon structures were multiwalled carbon nanotubes, which hollow cavity, diameter about 80nm, and revealed the presence of iron particles mainly in the tip of MWCNTs, suggesting that a tip - growth mechanism might be predominant. A homemade gas sensing system was constructed to examine the CNT samples as gas sensors for ethanol. The results revealed good sensitivities (26, 37, 42, 39, 40) for the concentration (100, 200, 400, 600, 800) ppm for MWCNTs prepared on the catalyst deposited using diode sputtering and sensitivity of (24, 11, 12, 20, 21) for MWCNTs prepared by spin coating technique. All the result measurements have done at room temperature

دراسة وتحقيق بشان عدم استقرارية الانجراف المنحني في الغلاف المغناطيسي للنجم النابض بالقرب من منطقة الاسطوانة الضوئية Study and Investigation of Curvature Drift Instability in Pulsar Magnetosphere Near Light Cylindrical Region

اسم المؤلف: محمد عبد الستار عبد الرحمن
اسم المشرف: ماجدة حمدان خضير الكبيسي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The case of curvature drift instability in pulsar magnetosphere is a phenomenon may be responsible of many properties including radio waves, that was studied its reasons. We studied the magnetic fields around the pulsar, and our study was nearby the light cylinder region, because the curvature of the magnetic field be greater in the light cylinder region (~ 107 cm).The value of magnetic field was calculated by using mat lab program in two ways : The standard model and relativistic model. Where the relativistic model includes two cases : flat space time and curved space time. The values of the two cases were compared, According to standard model the magnitude magnetic field component (Br ) equal to 1012 G and the magnitude magnetic field component (Bθ ) equal to 1011 G but in relativistic model equal to 1019 G and 1014 G respectively and this noticeable increasing in values because the mass factor enter in calculation , This was first part from study.The second part of the study includes the calculation of drift velocity, which was about (107 cm/sec) in standard model, The drift velocity in relativistic model was (102 cm/sec), Where the drift velocity values which can produce the curvature radiation must be in the range between (106 cm/sec) and less than the speed light.The calculated drift velocity was used to calculate the growth rate instability for each the primary particles which its Lorentz factor equal (108), the value of growth rate instability (1013 s - 1), and the energy loss rate (10 - 6 erg.s), while the secondary particles which its Lorentz factor equal to (104), the value of growth rate instability was (1015 s - 1) and the energy loss rate equal to (10 - 21 erg.s)

تاثير المعاملة الحرارية على الخواص البصرية للخلائط البوليمرية (PVC/PS/PMMA) Effect of Heat Treatment on Optical Properties of Polymer Blends (PVC/PS/PMMA)

اسم المؤلف: محمد زورة حسن
اسم المشرف: اسرار عبد المنعم سعيد
الموضوع العام: علوم الفيزياء
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: العمل الحالي من البحث يهتم بدراسة تاثير نسبة الخلط على الخواص البصرية للنماذج البوليمرية مدار البحث PS, PMMA] [PVC, والخلائط الثنائية ] [PS/PMMA, PVC/PMMA, PVC/PS والخلائط الثلاثية [PVC/PS/PMMA] وبمختلف التراكيز. كذلك دراسة تاثير المعاملة الحرارية على الخواص البصريه للانظمة البوليمرية [PVC/PS/PMMA] والخلائط الثنائية بنسبة [50 %PS/50%PMMA, 50% PMMA/ 50% PVC / 50% PS /50% PVC] صبت العينات كاغشية من البوليمرات المذكورة اعلاه والخلائط الثنائية والثلاثية ولمختلف التراكيز . وفحصت النماذج البوليمرية المحضرة طيفيا لاختيار نماذج البوليمرات ذات افضل خواص بصرية وجد بان الخليط الثنائي ( 50% PMMA/ 50% PVC) يمتلك احسن خواص بصرية وقد وجدت فجوة الطاقة الخليط تساوي(4.8eV) .اخضعت البوليمرات النقية[PVC/PS/PMMA] , مع الخلائط الثنائية[50 %PS/50%PMMA, 50% PMMA/ 50% PVC 50% PS /50% PVC] الى المعاملة الحرارية ضمن المدى[50 - 175 ºC] ولمدة ساعتين لدراسة تاثير المعاملة الحرارية على الخواص البصرية .لوحظ بالنسبة للانظمة البوليمرية المعاملة حراريا تغير في اطياف الامتصاص وضمن مديات الطول الموجي والتي تعتمد على نوع البوليمر والخليط البوليمري. التحلل الحراري ادى الى زيادة في اطياف الامتصاص للنماذج المعرضة للحرارة.حيث تعتمد الزيادة على نوع البوليمر والخليط البوليمري خصوصا عند درجة الحرارة 175 ºC بالنسبه الى(PS (وجد تناقص في اطياف الامتصاصية في الحالات التي يتسبب فيها التفكك الحراري بتلف سطحي مثل التصدعات والتشققات . حسبت فجوة الطاقة وطاقة اورباخ قبل وبعد المعاملة الحرارية للنماذج البوليمرية مدار البحث .اظهرت النتائج السلوك اللاخطي لعلاقه الترابط ما بين الثوابت البصرية والنسب الوزنية للخليط البوليمري قد اعزيت الى كونها غيرمتوافقة الخلط .ان السلوك اللاخطي لعلاقة الترابط بين الثوابت البصرية ودرجة الحرارة للنماذج البوليمرية المعاملة حراريا يعود الى التفكك الحراري غير النظامي لنماذج البحث . ولقد تم الكشف عن التلف السطحي ] التصدعات والتشققات[ الناجم عن التفكك الحراري باستخدام الميكروسكوب وجهاز المجهر الالكتروني الماسح[SEM] وجد بان التفكك الحراري من السهولة ان يحدث تلف سطحي ميكانيكي. لتحديد الخواص الرئيسيه للحزم اجريت فحوصات [FTIR] للنماذج البوليمرية قبل وبعد المعاملة الحرارية لتمييز خواص الحزم الرئيسية وتفسير نتائجها. | The present work was concerned with study of the blending ratio effect on the optical properties of the polymer systems involved [Poly(vinyl chloride) (PVC), Polystyrene (PS), Polymethylmethacrylate (PMMA)], binary blends [PS/PMMA, PVC/PMMA, PVC/PS] and ternary blends [PVC/PS/PMMA] at different concentrations. Also this work was concerned with study the effect of heat treatment of optical properties of polymer system involved [PVC/PS/PMMA] and binary blend with ratios, [50 %PS/50%PMMA, 50% PMMA/ 50% PVC and 50% PS /50% PVC]. The samples were casted as films from the homopolymer stated above and the blends as a binary and ternary blend at different concentration. These prepared polymer systems were evaluated spectrophotometically for selection the polymer systems of the best optical properties. It was found that 50% PMMA/ 50% PVC binary blend has the best optical properties. The results showed that its energy gap was (4.8eV). The homopolymer [PVC/PS/PMMA] and the binary blend [50 %PS/50%PMMA, 50% PMMA/ 50% PVC and 50% PS /50% PVC] were subjected to heat treatment with range of [50 - 175 ºC] for (2hr) to study the effect of heat treatment on their optical properties. The absorption spectra of the heat polymer systems showed heating induced absorption changes in the wavelength range, which depends on the polymer type and polymer blend. The thermal degradation caused increment in the absorption of degraded samples. The increment depended on the polymer type and polymer blend especially at 175 ºC. For (PS) decreasing in absorption was also found for cases in which, thermal degradation caused surface damage i.e. cracks and crazes formation. Also the optical energy gap and urbach energy were calculated the absorption spectra before and after heat treatment to the polymer systems involved.The results showed nonlinear relationship between the optical constants and blend ratio, it was attributed to their immiscibility. The nonlinear relationship between the optical constant of the heat treatment polymer systems and polymer blend with the heating temperature was attributed to the unsystematic thermal degradation induced by heating. Morphological investigations for the surface damages [crazes and cracks] caused were performed by optical microscope and SEM. It was found that the thermal degradation lead to some mechanical surface damage. FTIR spectroscopy was carried out for polymer systems before and after heat treatment to identify the region of the main characteristic bands and its results was investigated.

وصف العازل الكهربائي لقدرة ايقاف الجسيمات المشحونة في المواد الصلبة Dielectric Description of Stopping Power for charge particles in Solid Materials

اسم المؤلف: محمد جاسم محمد علي الكندي
اسم المشرف: خالد عبد الوهاب احمد
الموضوع العام: علوم الفيزياء
السنة: 2004
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا البحث اجراء دراسة نظرية لموضوع دالة العازل (dielectric function)، فقد تمت مقارنة نوعين مهمين من دوال العازل وهي دالة العازل للباحث (Lindhard1954) ، ودالة العازل للباحث (Mermin 1970). وقد تضمنت الدراسة استخدام هذين الانموذجين في حساب كل من الجهد المحتث والمؤثر (Induce and Wake Potential) ، والقوى المؤثرة (القوة الموقفة Stopping force والقوة الجانبية Lateral force) بالاحداثيات الديكارتية (Cartizian coordintate) (x,z) والاحداثيات الاسطوانية (Cylindrical corrdinate) (ρ,z). وكذلك حساب قدرة الايقاف (Stopping power) والتطوح في الطاقة (Straggling of energy) للجسيمات المشحونة (البروتونات) الساقطة على اهداف صلبة (الالمنيوم Al، السيليكون Si، النحاس Cu، الفضة Ag، الذهب Au) والتي تتحرك بسرعة منتظمة ) υ (. استخدمت الطرائق الرياضية التقريبية للحساب، وبرمجة بعض المعادلات وفق برنامج كتب بلغة فورتران (Fortran - 90) ، للحصول على النتائج النظرية المطلوبة التي تم توضيحها كرسوم بيانية.وبالنتيجة استنتجنا ان الاختلاف بين الانموذجين لدالة العازل (Mermin 1970 and Lindhard 1954) يقع في منطقة السرع الواطئة والمتوسطة، ولوحظ هناك تطابقا" واضحا" عند السرع العالية، وان تاثير الجهد المؤثر (Wake potential) ، والقوة الموقفة (Stopping force) (التي تعرف على انها قدرة الايقاف) يكون باعلى قيمة له لحظة تفاعل البرتون مع الهدف اي عند النقطة المرجعية (Reference point =0, Z=0) على عكس القوة الجانبية (Lateral force) التي لا يوجد لها اي تاثير عند النقطة المرجعية. ومن المهم ايضا الاخذ بنظر الاعتبار الحالات الخاصة للسرعة التي يتحرك بها الجسيم المشحون ونوع الوسط العازل المستخدم. | In this research a theoretical study carried out on the subject of dielectric function, where the comparison between two important dielectric functions (which is the Lindhard 1954 dielectric function and Mermin 1970 dielectric function) has been performed. This investigation has dealt with using these two samples to calculate the Induce and wake potential, stopping force and lateral force in the cartizian coordinate (x,z) and cylindrical coordinate (z, ). And also to calculate the stopping power and straggling of energy for the charged particales (protons) falling on the solid targets (Aluminum [Al], Silicon [Si], Copper [Cu], Sliver [Ag], Gold [Au]). A mathematical approximative methods used in the calculation and some of equation where programmed by computer program (Fortran 90) to obtain the theoretical results which is shown in graphic. In the results we conclude that the difference between the two dielectric functions (Lindhard 1954 and Mermin 1970) is in the low and medium velocities and also seen that it is superposed in the high velocities and the effect of the wake potential and stopping force be in the maximum value the moment of intraction between protons and target i. e. (in the reference point  = 0, Z = 0) on the opposite of lateral force which has no effect on the Reference point. It is also important to take to consideration the special cases of velocity of the charged particles and the kind of dielectric medium used

ابطاء الضوء باستخدام الشفافية الكهرومغناطيسية المحتثة في انظمة InGaAs/InGaAsP شبه الموصلة النقطية الكمية Slow Light Using Electromagnetic Induced Transparency in InGaAs/InGaAsP Semiconductor Quantum Dot Systems

اسم المؤلف: محسن كاظم عبد الخيكاني
اسم المشرف: امين حبيب حنون الخرسان كاظم حسن حسين الموسوي
الموضوع العام: علوم الفيزياء
السنة: 2008
الموضوع الدقيق: الالياف الضوئية
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: اصبحت المقدرة على معالجة سرعة الضوء احد الموضوعات المثيرة حاليا في البصريات. هذه الاطروحة تتناول ابطاء الضوء في تراكيب اشباه الموصلات النقطية الكمية ذات البناء النانو اعتمادا" على خواصها التي تم التنبؤ بها. استخدمت انظمة InGaAs/In1 - xGaxAsyP1 - y/InP النقطية الكمية كموضوع للدراسة. ان هذا نتيجة لخواصها الطيفية حيث يصبح العمل ممكنا" عند الطول الموجي الخاص بالاتصالات البصرية (1550 نانوميتر). استخدمت الشفافية المحتثة كهرومغناطيسيا لابطاء الضوء في هذه الدراسة التي يمكن ان تقسم الى اقسام. في القسم الاول ، وبافتراض ان النقط الكمية تاخذ شكل قرص تمت دراسة انظمة InGaAs/In1 - xGaxAsyP1 - y/InP النقطية الكمية لنسب0.1=x ،0.2،0.39 وابعاد (14، 3.5)، (14، 6.5)، و(30،8) نانوميتر على التوالي لكل من (نصف القطر، الارتفاع) للقرص الكمي. استخدمت دوال بسل لوصف دوال الموجة. ومن ثم، تم حساب مستويات الطاقة في مستوي القرص وعند الارتفاع. تمت دراسة ابعاد مختلفة من (نصف القطر، الارتفاع) للنسبة 0.1=x. اعتمادا" على حساب مستويات الطاقة، تمت دراسة التاثيرية الخطية لهذه الانظمة النقطية الكمية ثلاثية المستويات في الجزء الثاني من هذه الدراسة. تمت دراسة تاثير معاملات مثل تركيب الطبقة الرطبة، قدرة الضخ، العرض المتجانس للخط، معدل الاسترخاء، تنغيم موجتي الاشارة والضخ على الامتصاص ومعامل الانكسار. وجد انه عند قدرة ضخ محددة يظهر شباك الشفافية. مع زيادة قدرة الضخ يتسع شباك الشفافية بينما يقل الامتصاص. نفس التصرف شوهد ايضا عند تناقص نسبة الانديوم في الطبقة الرطبة.كما شوهد تاثير قوي للعرض المتجانس للخط. في الجزء الثالث من الدراسة تمت دراسة ابطاء الضوء، حيث تمت دراسة المعاملات التي اثرت على الجزء الثاني من هذه الدراسة. لقد وجد انه عند قدرة محددة يمكن ابطاء الضوء باكبر قدر ممكن. من ثم تقل مقدرة ابطاء الضوء عند زيادة قدرة الضخ. لقد وجد ان العمل عند بعض قيم عرض الخط المتجانس مناسبة للتطبيقات البصرية كليا". لقد وجد ان تقليل نسبة الانديوم تقلل مقادير ابطاء الضوء. في الجزء الرابع تم اشتقاق التاثيرية اللاخطية للنظام النقطي الكمي ذي ثلاث مستويات، اعتمادا" على نظرية مصفوفة الكثافة. تم حساب الامتصاص الكلي (الخطي واللاخطي) للتراكيب موضوع الدراسة. لقد وجد ان الطاقة المطلوبة لكي تظهر الفجوة الطيفية تقل مع انخفاض نسبة الانديوم. | The ability to manipulate the speed of light has recently become one of the most exciting emergent topics in optics. This thesis presents the study of slow light in quantum dot (QD) semiconductor nanostructures depending on their predicted properties. InGaAs/In1 - xGaxAsyP1 - y/InP QD system is used as a subject of this study. This is due to their spectral characteristics, where one can work at (1.55µm) the wavelength of optical communications. Electromagnetically induced transparency is used to slow light in this study which can be divided into the following parts. In part one, assuming a disc shaped of the QDs, an InGaAs/In1 - xGaxAsyP1 - y/InP QD system is studied theoretically for mole fractions x = 0.1, 0.2 and 0.39 at (14, 3.5), (14, 6.5) and (30, 8) nm respectively, for (radius and height) of the quantum disc. Bessel functions are used to describe wave functions. Then, the energy levels are calculated in the disc - plane and height. Different sizes (radius and height) for x = 0.1 mole fraction are studied.Depending on the energy level calculations, the linear susceptibility of these three - level QD systems is studied theoretical calculated in part two. Effect of parameters like : Wetting Layer composition, pump power, homogeneous linewidth, dephasing rate, and signal (and pump) detuning on the absorption and refractive index are studied. It is found that at certain pump power the transparency window appears. With increasing pumping power the transparency window is widened while the absorption is reduced. This behavior is also seen with reducing In - mole fraction in the WL. Strong effect of homogeneous broadening is also seen. In part three, the slow light is studied, where the parameters affecting on part two is also studied here. It is found that at certain pump power the slow light gets maximum value 1.4x10 - 5 W/cm2. Then it is reduced with increasing power. Work at some homogenous linewidths is found to be adequate in all - optical applications. Reducing In - mole fraction is shown to reduce slow light values. While high values are gotten for structures with smaller size. Values of storage time are then deduced for structures under study. Parts two and three are included in chapter three of this thesis.In part four, the non - linear susceptibility for a three - level QD system is derived based on the density matrix theory. The total absorption (linear and non - linear) is then calculated for the structures under study. It is found that the power required to be the spectral - hole appear is reduced with decreasing In - mole fraction.

تحضير التراكيب النانوية المشوية وغير المشوبة لمركب ثنائي اوكسيد التيتانيوم وتطبيقاتها Syntthesis off Doped and Undoped TiO2 Nanosttructtures and ttheiir Applliicattiions.

اسم المؤلف: محسن عطية خضير الطائي
اسم المشرف: رعد سعدون صبري يوسف كاظم عبد الامير
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: TiO2 nanostructures were synthesized by two different techniques : sol - gel and electrospinning methods. Each technique gives us specified nanostructure; nanoparticles can be resulted from the sol - gel method, whereas nanofibers are resulted from electrospinning method.In sol - gel method, the effects of gelatinization time (1, 3, 5) days and calcination temperature (500, 700, 900) oC were studied on TiO2 nanoparticles. The effect of applied voltage (15, 18, 21) kV, flow rate (1, 5, 10) ml/h, and PVP concentration (7, 10, 13) % are studied in the case of TiO2 nanofibers. Also Different ratios of Ag doped TiO2 nanofibers (3, 6, and 9) % were synthesized using electrospinning method. The resulting nanomaterials being characterized using XRD, AFM, FESEM,UV - Vis analysis, and PL measurements. X - ray diffraction measurements show that TiO2 nanoparticles were polycrystalline with anatase phase and transform to rutile phase at 900 oC. TiO2 nanofibers have only anatase phase. The crystallite size and lattice constants (a and c) for both anatase and rutile phases are calculated. No noticeable peaks of silver metal were observed in the XRD when Ag is doped in titania.The roughness average for TiO2 nanoparticles, which is estimated from AFM images increases when the gelatinization time and the calcination temperature increased, but at 900 °C it decreases. This may be attributed to the change from anatase to rutile phase. In the case of TiO2 nanofibers, the roughness average increases with the increases of applied voltage and decreases of the flow rate. While the maximum roughness occurring at 10 % PVP concentration. In general, the roughness average increases with the doping ratio. The diameter size distribution of both TiO2 nanofibers and nanoparticles show the favorite Gaussian distribution.The FESEM images show that the fiber has a uniform distribution and looks like mats. The grain size of TiO2 nanoparticles increase from (58 - 89) nm with the gelatinization time increase from (1 - 5) days respectively, also it increases from (58 - 111) nm with the calcination temperature increase from (500 - 900) °C respectively. In the case of TiO2 nanofibers, the average fiber diameter decreases with increase the applied voltage, and decrease both the flow rate and PVP concentration. Increasing Ag doping ratio will decrease the average fiber diameter, and convert the smooth surface of the nanofibers to granular surface. Silver doped TiO2 nanofibers are very clear in both AFM and FESEM images. The allowed direct band gap of TiO2 nanoparticles slightly decreases from 3.45 to 3.35 eV when the gelatinization time increases from (1 - 5) days respectively. When the calcination temperature increases from (500 - 900) oC, the band gap gradually decreases from(3.45 - 3.30) eV. The band gap of TiO2 nanofibers increase from (3.35 - 3.45) eV due to the increase of the applied voltage from (15 - 21) kV respectively, and decrease from (3.45 - 3.4) eV with increase the flow rate from (1 - 10) ml/h respectively. The decrease of Eg is also observed with the increase of PVP concentration. Finally the band gap decreases from (3.45 - 3.20) eV when the Ag doping ratio increases from undoped to 9 % respectively.PL spectra of TiO2 both nanoparticles and nanofibers are recordedat room temperature and excitation wavelength of 260 nm. Two groupsof peaks were observed, the first peaks lie in the UV region, which can be attributed to the emission of band gap transition related to the anatase structure of TiO2 nanofibers, whereas the second emission band lies in the visible region and originated from the charge recombination at the shallow - trap surface state.Photocatalytic properties in different concentrations (2, 10, and 20) mg/50 ml of both TiO2 nanoparticles and nanofibers were evaluated by photocatalytic degradation of methylene blue (MB) in water under UV light irradiation (λ= 365 nm). The outcomes indicate that Ag doped TiO2 nanofibers exhibited most efficient photocatalytic activity of up to 96 % after 160 min as shown by the degradation of the MB aqueous solution, followed in terms of efficiency the undoped nanofibers, and then nanoparticles respectively. These results make Ag doped TiO2 nanofiberis the most efficient material in water treatment field.

دراسة تحليلية لزيوغ العدسة المغناطيسية المسقطية Analytical Investigation of Magnetic Lens Aberrations

اسم المؤلف: محسن صلبوخ ارهيف العمشاني
اسم المشرف: حسن نوري عبد الوهاب العبيدي كاظم جواد كاظم الشجيري
الموضوع العام: علوم الفيزياء
السنة: 2006
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا البحث تم اجراء دراسة نظرية - حاسوبية لدراسة امكانية طريقة التوليف في الحصول على عدسات مغناطيسية عديمة الدوران والتشويه. حيث تم وضع دالة هدف جديدة لتمثيل توزيع كثافة الفيض المغناطيسي المحوري للعدسات المغناطيسية الثنائية والاحادية الفجوة. تم دراسة تاثير متغيرات الامثلية التي تفرضها دالة الهدف، على الخواص المسقطية والاقطاب المعاد بناؤها المنتجة بواسطة مجالات التصوير. حيث شملت هذه الدراسة كل من مجالات التصوير المغناطيسية الاحادية والثنائية الفجوة.في الحقيقة، تعطي دالة الهدف المستخدمة اثنان من متغيرات الامثلية الهندسية هما سمك الفجوة S وقطر الفتحة D ومتغير امثلية فيزياوي واحد هو تهيج المجال التصويري NI . اظهرت النتائج بان المتغير NI يمكن ان يحذف من اجراء الامثلية لانه لا يؤثر على الخواص البصرية وكذلك الاقطاب المعاد بناؤها. بينما S وD لها اهمية معتبرة في تصميم العدسات المغناطيسية الثنائية الفجوة. اضافة الى ذلك اوضحت النتائج، ان الطريقة الحالية يمكن ان تستخدم بشكل واسع لدراسة وتصميم العدسات المغناطيسية الاحادية والثنائية الفجوة.حيث امكن الحصول على صور عديمة الدوران والتشويه باختيار مناسب لقيم النسب بين فجوات وفتحات العدسة الاولى والعدسة الثانية. | A theoretical - computational investigation for studying the synthesis for possibility to produce a rotation and distortion free magnetic lenses have been carried out. Where, a new target function put forward to approximating the axial magnetic fields of a double and single - gap magnetic lenses. The influence of the optimation parameters araises from the proposed target function on the projector properties and the reconstructed polepeices of the produced imaging fields have been investigate. This investigation were covered both the single and double - gap imaging magnetic fields.In fact, the introduced target function gives two geometrical parameters namely the gap width S and bore diameter D and only one physical parameter which is the field excitation NI. The results have revealed that the parameter NI can be released from the optimition procedure since it gives no effect on the optical properties and hence the reconstructed polepieces. While the parameters S and D have a considerable important in designing double and single gap magnetic lenses. In addition, the results have clearly shown that, present technique can be widely used to design and investigate single and double gap magnetic lenses .Where, a rotation and distortion free images have been obtain by a suitable choice of the values of first lens to second lens gap and bore ratios

اعتماد معامل التصادم على فقدان طاقة الايونات العنقوديه السريعه Impact Parameter Dependence of Energy Loss of Fast Cluster Ions

اسم المؤلف: مثنى محمد محمود
اسم المشرف: خالد عبد الوهاب احمد رياض خليل احمد
الموضوع العام: علوم الفيزياء
السنة: 2010
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Electronic of molecule and ionic clusters study are useful tools in both fundamental research of both material science and plasma physics. The effect of a cluster shown clearly deviatesin the sum of individual effects of each cluster component. Electronic energy loss and channelling of molecular clusters as a function of impact parameter are not so well understood which is according to the mono - atomic ions phenomena. The cluster stopping power can be theoretically treated by the united - atom model, which describes the cluster as an equivalent single atom, with atomic number and mass being the sum of atomic number and mass of each component. This model is limited to the very beginning of the interaction between cluster and the target.The present work describes the calculation of the impact parameter dependent energy loss for bar ions at high velocities, which reproduces full first order calculations for all impact parameters without large scale calculation. The physical inputs which be used the electronic density and the oscillator strength. Atomic units are used throughoutthe present work.This work describes an extension of the perturbative convolution approximation (PCA) model, based on the impact parameter method, for molecules and clusters namely MPCA (Molecular PerturbativeConvolution Approximation). MPCA gives the energy loss as a function of impact parameter taking in the consideration close and distant collisions.In the present work a simple formula for the electronic energy loss of bare ions, screened projectile and molecular cluster ions as function of impact parameter is described. Starting from first order perturbation theory and proposed three programs written in FORTRAN - 90. Using the physical inputs are the electron density and oscillators strengths of the atom. Good approximation has been done to avoid going in a complex numerical calculations and we obtained good agreement with previous works.An extension to the convolution approximation for the ionization probability, energy loss and energy loss straggling as a function of impact parameter for swift ions leads to write a program for the numerical calculations and then apply it on C - target to study the effects of sub - shell on the variation of impact parameter. , and sub - shells have a different effects on the energy loss and energy loss straggling.

دراسة المؤثرات على الاتصالات الليزرية تحت الماء Study of the Effects on Underwater Laser Communications

اسم المؤلف: مازن علي عبد علي
اسم المشرف: محمد تقي حسين كاظم حسن حسين الموسوي
الموضوع العام: علوم الفيزياء
السنة: 2010
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم تصميم وبناء منظومة ليزر للاتصالات تحت الماء. هذه المنظومة استخدم الدايود الليزري ذو الطول الموجي (532nm), هذه المنظومة تعمل على تحميل موجة صوتية على ضوء الليزر وارسالها من نقطة الى اخرى. حيث يتم ادخال الموجة الصوتية عن طريق اللاقطة التي تحولها الى اشارة كهربائية ثم تكبيرها وتضمينها. ثم يجهز التيار الى الثنائي الليزري ذي القدرة (50mw)عن طريق الترانزستور(MJ3055), ثم يتم ارسال الحزمة الليزرية خلال الماء واستلامها من الجهة الاخرى. استخدم انبوب من الزجاج نوع بايركس مغلق من الطرفين بواسطة نافذتين من الكوارتز. ان دائرة الاستقبال تعمل على تحويل الاشارة الليزرية الى اشارة كهربائية ضعيفة بواسطة الكاشف. هذه الاشارة تكبر ثم يتم فتح التضمين للحصول على الاشارة الصوتية التي تكبر باستخدام ال( (I.C 386 ويتم ارسالها عن طريق السماعة. في هذا العمل استعمل ثلاثة انواع من الاوساط المائية كاوساط ماصة للاشارة, تم تحقيق اتصال صوتي تحت الماء لمسافة (1m) ولثلاثة حالات : الاولى : في درجة حرارة الغرفة وكانت نسبة الاشارة الى الضوضاء (13.9dB) للماء المقطر, الثانية : باستخدام موشور نيكول حيث كانت نسبة الاشارة الى الضوضاء (dB12) للمستقبلة الاولى بينما كانت (11.4dB) للمستقبلة الثانية في الماء المقطر. الثالثة : في درجات حرارة مختلفة حيث كانت نسبة الاشارة الى الضوضاء (6.9dB) عند درجة حرارة (307K) بينما كانت (14.5dB) عند درجة الحرارة (333K). تم حساب معامل التوهين الحاصل لليزر المار خلال الماء (مقطر, حنفية, نهر). تم استخدام برنامج (MATLAB) لتحليل الحزمة الليزرية المرسلة والمنعكسة وملاحظة توزيع الشدة في ظروف مختلفة.وكذلك تم استخدام برنامج (ZEMAX - 7) الخاص بالتصاميم البصرية, لتصميم منظومة لمرور الشعاع الليزري خلال الماء ومنها تم حساب دالة الانتقال البصري, ومخطط البقعة الليزرية, والطاقة المتجمعة, وعدم التضليل في الشعاع | A design and construct underwater laser communication system have been studied. This system used diode laser of wavelength 532nm. It works by modulating sound wave on the laser beam and sending it away from point to another. The sound wave passed in a microphone and then converts into an electrical signal; this signal will be amplified and modulated. The resultant current is supplied to a laser diode (50mW) output through the transistor (MJ3055) and the laser beam allows passing through water and received from the other side. A tube of pyrex glass of length (1m) is used to contains two quartz windows. The laser power in receiver circuit is converted to a weak electrical signal using silicon detector. This signal is amplified and the audio frequency is separated from carrier frequency and then amplified using (I.C 386) a whole speakers. In this work three types of water medium have been used with different absorption signal. To satisfy a high quality sound communication link underwater for a distance about (1m) using the three following cases : • At room temperature : the signal to noise ratio S/N is (13.9) dB for distilled water, while (9.5) dB for tap water and (6) dB for river water. • Nicol Prism is used and the signal to noise ratio of (12) dB for first receiver while (11.4) dB for the second receiver in distilled water.• At different temperature : the signal to noise ratio S/N increase with increasing temperature is measured (6.9) dB in (307) K while (14.5) dB for river water at (333) K. The attenuation factor of laser beam which passing through three types of water (distilled, tap and river) have been measured. The intensity distribution of the incident laser beam and the reflected beam is computed and analyzed with matlab code, the changes in distribution of intensity of the transmitter pulse are compared with various conditions.Finally zemax 7 code is used, to design the optical system for the laser beam through the water, and calculate optical transfer function (OTF), spot diagram, encircled energy, and unvignetting rays

تـمـيـيز الـبلازما في مـعـجـل سـكـة كهـرومغـناطـيسي مـسـتمر Characterization of Plasma in D.C. Electromagnetic Rail Accelerator

اسم المؤلف: لطـفي مـجـيد مـحـمد صالـح
اسم المشرف: مهدي هادي جاسم صباح توفــيـق احــمــد
الموضوع العام: علوم الفيزياء
السنة: 2004
الموضوع الدقيق: فيزياء البلازما
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: فـي هـــذا البـحـث تـم اسـتـخــدام معـجـــل ســـكـة كـهــرومغــــناطـيـــسي بابـعاد (10x10 mm2 ) ، ذو تجـويـف مربـع وبطـول ( 2 m ) ومجـهز بطاقـة ( 60 kJ ) عـبـر مجامـيع متـسـعات ذات سـعة كـلـية (mF 133) ، وتعـمل ضـمـن جـهـد (750 - 1000 V ) والتـيار النـبـضي الخارج بحــدود (kA 70 ) ، اسـتـخدمت هـذه المـعـلـمات لحـساب ممـيزات البـلازما كـدالــة لكـتـلـتـها داخــل مـعـجـل الـســكة .افـترض ان تـكــون التـوصـيلـية مـنـتـظـمة للـبلازما وان تـكــون الـبلازما مـتايـنــة كـلـيا ، عـنـد حـدوث عـمـلــية فـصل الشـحــنات في حافات الـبلازما فان القـذيـفــة الـمـوجـــودة فـي مــقـدمــــة الـبلازما تــتـعـجــل بـفــعـل قــوة لـورنـز (Lorentz Force ) ( ) ، حـيــث انـه هـنالـك جــزء مـن مـتــجـه الـتـيار مـواز لاتـجاه الـتــعـجــيل . تـم تـحـديــد خـصائـص الـبلازما من خــلال حـلـول انـية لمـعادلات حـفـظ الكــتـلة وحـفـظ الطاقــة وحـفـظ الـزخــم ، بالاضافــة الى حـلـول مـعادلــة ساها ( Saha Equation ) ، وبـذلـك لـوحـظ عـلاقــة تـغـيرها مـع كـتـلــة الـبلازما ، وان الحالــة المـتـعادلــة تـحـدث عـنـدما تـتـساوى الطاقــة المـتـبـددة في الـبلازما بـشـكل حـرارة اومـيــة ( I2RP ) بالطاقة الحـــراريـة المـفــقـــودة مــن الـبــلازما فــي درجــــة حــرارة ( 16500 oK ) ، وان نـــســــبة ( 62% ) من الـبلازما قــد تايـنـت ، لـذلـك فان افـتـراض الـتايـن الاحادي للـبلازما قــد تـحـقــق . تــم قــياس الـســرعـــة الـنـهائـيـــة لـقــذيـــفــــة تــزن ( 1 g ) فوجــدت مـــساويـة لـ ( 1070 m/sec ) تـقـريـبا ، والـتي هـي اقــل مـن الحـساب النـظـري ( 1101 m/sec ) في زمـن قـــدره ( 1.9 msec ) . تـمـت المـقارنــة مـع تجارب الاخــريـن والـتـي تـتــضـمـن ضـعـف قـيــمة الـتــيار والـطاقـــة الـتـي اسـتـخــدمـت فـي البـحــث وذلــك لـعـــدم تــوفــر ابـحاث مــنـشــورة بـطاقــة مـقاربـة للـمـقارنـــة . | In the present work an EM. Railgun is considered the dimension of (10x10 mm2) with square bore of length two meters, powered of (60 kJ) by capacitor banks (133 mF) and operated at (750 - 1000) volt. The output pulse current measured is about (70 kA), used to evaluate the plasma characteristics as a function of plasma mass inside the Railgun. The plasma conductivity is assumed to be uniform and to be fully ionized; when charge separation occurs at the edges of plasma, the projectile is located ahead of plasma armature which is accelerated by Lorentz force ( x ), indicating that there is a small component of current parallel to the direction of acceleration. The plasma parameters are determined by a simultaneous solution of the conservation of mass, momentum and energy equation together with Saha equation, so that the relationship with the plasma mass are satisfied, and the equilibrium condition occurs when the energy dissipated in the plasma by ohmic heating (I2RP) balanced by the heat loose from the plasma at a temperature of (16500 oK) and (62%) of the plasma ionized, therefore, the assumption of singly ionized plasma is justified. The muzzle velocity of (1 g) projectile is measured approximately to be (1070 m/sec) which is less than the theoretical calculation (1101 m/sec) at (1.9 msec). The comparison with other experiments have been described where the current and the energy powered are two times the present work and more; because of unlucky findings, interested energy being published to be compared with present work

دراسة تاثير التركيزعلى الكفاءة الكمية لصبغة الفثالوسيانين - نحاس CuPc Study of the effect of concentration on the quantum efficiency of copper - Phthalocyanine dye (CuPc

اسم المؤلف: كاترين كاظم شنشل
اسم المشرف: محمد تقي حسين صبري جاسم لفتة
الموضوع العام: علوم الفيزياء
السنة: 2010
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: لقد تمت دراسة اطياف الامتصاص والفلورة للصبغة العضوية نوع الفثالوسيانين - نحاس(CuPc) في المذيب الدايوكسان, وتحت ظروف طبيعية عن(درجة حرارة الغرفة) وللتراكيز الثلاثة (5x10 - 5 , 1x10 - 4 , 2x10 - 4) مولاري. ان الشدة النسبية لطيفي الامتصاص والفلورة تزداد مع زيادة التركيز وهذا ينطبق مع قانون بير - لامبرت. ان جزيئة الفثالوسيانين((CuPc تمتلك حزمتي امتصاص في المنطقة المرئية وفوق البنفسجية من الطيف,حزمة الطاقة العالية تقع عند حوالي 350 نانومتر,وتعرف عموما باسم حزمة - B.بينما حزمة الطاقة الواطئة فتقع عند حوالي 650 نانومتر,وتعرف عموما باسم حزمة - Q.وقد بينت النتائج تاثير نقصان التركيز في ازاحة اطياف الامتصاص والفلورة الى الاطوال الموجية القصيرة .(Blue Shift) كانت كفاءة الكمية لـ (CuPc) عند التركيز الاول (2x10 - 4) مولاري في منطقة UV/visible 52%) و59%) على التوالي, وزمن العمر الاشعاعي (2.5071 و3.1802) نانوثانية وزمن عمر الفلورة (1.3036و 8763.1) نانوثانية على التوالي, وكانت كفاءة الكمية عند التركيز الثاني (1x10 - 4) مولاري 73%) و65%) وزمن العمر الاشعاعي (5.1426 و5.9717) نانوثانية وزمن عمر الفلورة (7540. 3 3.8816) نانوثانية وعلى التوالي, وكانت كفاءة الكمية عند التركيز الثالث (5x10 - 5) مولاري 83%) و74%) وزمن العمر الاشعاعي (6.2593 و7.6244) نانوثانية وزمن عمر الفلورة (5.1952 و5.6420) نانوثانية وعلى التوالي. دلت الدراسة لاطياف الامتصاص والفلورة للصبغة العضوية (CuPc) بان علاقة الكفاءة الكمية تتناسب عكسيا مع زيادة التركيز | The Absorption and Fluorescence spectra have been studied for organic dye Copper - phthalocyanine (CuPc) in solvent Dioxane separately under normal circumstances at (room temperature) for three concentration (2x10 - 4, 1x10 - 4, 5x10 - 5) M. The intensities of the absorption and fluorescence spectra are increasing with the increase of the concentration which agrees with Beer - Lambert Law. Phthalocyanine molecules (CuPc) have two absorption bands in the visible and ultraviolet region of the spectrum. The higher energy band, occurring at around 350 nm, is generally known as the B - band. The lower energy band, occurring at around 650nm, is generally known as the Q - band. The measurement shows that the Absorption and Fluorescence spectrum have shifted to short wavelengths (Blue Shift). The quantum efficiency of (CuPc) at (2x10 - 4 M) in UV/visible region is (qFM = 52% & 59%) respectively. While the radiative life time is (tFM = 2.5071 ns & 3.1802 ns) and the fluorescence life time is (tF = 1.3036 ns & 1.8763 ns) respectively. For the second concentration (1x10 - 4 M) is (qFM = 73% & 65%), (tFM = 5.1426 ns & 5.9717 ns) and (tF = 3.7540 ns & 3.8816 ns). For the third concentration (5x10 - 5 M) is (qFM = 83% & 74%) (tFM = 6.2593 ns & 7.6244 ns) and (tF = 5.1952 ns & 5.6420 ns).The quantum efficiency results appear to be increase with decreasing concentration.

المقاطع العرضية للانوية المركبة المتكونة من تفاعلات (n,p) و(p,n)

اسم المؤلف: فردوس سامي حسين الياسري
اسم المشرف: ايمان طارق العلوي
الموضوع العام: علوم الفيزياء
السنة: 2010
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The cross sections for (p,n) and (n,p) reactions were calculated according to the available International Atomic Energy Agency (IAEA) libraries and other experimental published data. The well known international libraries like EXFOR, ENDF, JENDL, JEF, JEFF, BROND, CENDL, contain some cross sections measured during the period from the middle of the last century up to several years ago.This study is concerned with the nuclear reactions used in the production of the protons or neutrons, which are important in shielding calculations, accelerators and proton therapy.The analyzing of a complete energy range has been done starting from threshold energy for each reaction. The cross sections are reproduced in fine steps of incident proton or neutron energy in 0.01 MeV intervals with their corresponding errors. The adopted cross sections for all available experimental data have been calculated for all the considered reactions. A mathematical representative equation for all these reactions is formulated. These equations represent the variation of the cross section with energy, which could be used to predict the values of uncalculated cross sections.The cross sections of light elements like Tritium , Helium , Lithium isotopes ,Berlium , Boron isotopes , Carbon , Nitrogen , Oxigen , Alaminum , Silinum isotopes , , , and Phosfor in specific reactions were considered. The calculation of the adopted values for (p,n) and (n,p) reactions have been done and compared with international libraries which give good agreements.The (n,p) reactions cross sections values are derived from the data of (p,n) reactions and visa versa as a function of neutron or proton energy, respectively, by using the reciprocity theory and the principle of reverse reactions for the ground state.The stopping power according to Zeigler formulae was used in order to obtain the neutron yield for each reaction. Q - value, threshold energy, binding energy, compound nucleus cross sections, transmitted wavelength and the probability of occurrence of the reaction have been also calculated.The programmes of adopt.m, reverse.m, stop.m, yield.m, and cnpw.m have been built for the first time in the present work using Matlab 7.0 to calculate the results of the present work, as well as SRIM (2003) program.The evalutated (p,n) and (n,p) cross sections which are used for the first time, in spite of the numerous data available, a limited number of studies concerning the light elements with very small half life are still very important in nuclear technology. They prove that our calculated values are in good agreement with the published data.

دراسة التغير النهاري للاشعاع الشمسي على مدينة بغداد A Study of Diurnal Variation of Solar Radiation Over Baghdad City

اسم المؤلف: فاتن عزت محي الدين علي العبيدي
اسم المشرف: امال محمد الحلو علي عبد داود الزكي
الموضوع العام: علوم الفيزياء
السنة: 2011
الموضوع الدقيق: فيزياء الطاقة الشمسية
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يعتمد مظهر اي مشهد مضاء بواسطة الاشعاع الشمسي المباشر وغير المباشر على مجموعة من العوامل. توزعت هذه العوامل بين هندسية الرؤيا، انعكاسية تركيب المشهد، الاضائية والظروف الجوية. وبمرور الوقت فان هذه العوامل تتغير وبالتالي تؤثر على كيفية ظهور المشهد. تعتبر مجموعة صور المشهد الملتقطة والتي يتم جمعها بمرور الزمن ذات قيمة في دراسة تغاير مظهر المشهد والذي يمكن ان يقود الى تطبيقات جديدة ويساعد على تحسين النظريات والاساليب القائمة والتي تقود الى اضاءة اوساط يمكن السيطرة عليها. يوفر تحليل مجموعة الصور على فهم التاثير الذي يمكن ان تسببه الاضاءة على اداء النظام البصري. تم تقديم الدراسة الحالية كدراسة تحليلية احصائية مركزة لمجموعة الصور الملتقطة تحت اضاءة الاشعاع الشمسي المباشر وغير المباشر لمشهد ما بداخل منظومة بصرية مائلة باتجاه خط الاستواء. تم اجراء التحليل من خلال دراسة تغاير بضعة عوامل احصائية كدالة للزمن فضلا"عن مساحة فتحة نافذة الضوء المستخدمة، اختبار افضل القياسات الكمية لمحاكاة تغاير الشدة اليومي مع الزمن وبالتالي دراسة تاثير الاضائية على تباين الصورة. تم تحقيق الاهداف السابقة من خلال تحليل الصور عبر التغاير اليومي للحزم الحمراء - الخضراء والزرقاء والمركبةL. تم اعتماد ثلاث خوارزميات بالاستناد على الخواص الاحصائية لمؤثر سوبل لكشف الحواف، الخط ومنطقة الصورة المستقطعين. في الخوارزمية الاولى والمستندة على الخواص الاحصائية للحافة تم ملاحظة وجود حالة مستقرة للتباين مع الزمن بين اوقات شروق وغروب الشمس مع وجود حالات استثناء اثرت بفاعلية على قيمة التباين تمثلت بوجود الهباء الجوي في الساعات الضبابية والاضاءة الداخلية العالية. للخوارزمية اعلاه وتحت تاثيرمستقر لحالة الطقس وباستخدام زاوية خط العرض كزاوية ميل تم ملاحظة سلوك متميز قوي للتغاير اليومي للقياسات الاحصائية مع مساحة الفتحة المستخدمة في الاعتدالين. اكدت الخوارزمية المعتمدة الانحراف الشمسي الحاصل في الاعتدالين وفتحت حقل جديد للتعاون بين علم الفلك، جمع البيانات، التقنية البصرية وتحليل الصورة لفهم العالم الذي نعيش فيه.تم استخدام نتائج الخوارزمية الثانية والمستندة على الخواص الاحصائية للخط المستقطع لفحص الصورة. اظهرت قياسات الشدة وباستخدام هذه الخوارزمية معلومات حيوية عن انواع مختلفة من الاستطارة للضوء قيد الدراسة ومن ثم الطبيعة الفيزيائية للضوء. اظهرت نتائج القياسات لشدة الخط المستقطع الدور المتميز لاستطارة رايلي وماي والتي تعمل وبصورة منفردة ولفترات زمنية محددة على توزيع قيم شدة الخط المستقطع للحزم الحمراء - الخضراء والزرقاء والمركبة L. ان موقع الخط المستقطع على الصورة الملتقطة يحدد نوع العامل الاحصائي والذي يمكن استخدامه في علاقته مع الزمن ومساحة فتحة نافذة الضوء في تمثيل التغاير اليومي لبعض الظواهر الفيزياوية. تم ملاحظة دور العامل الاحصائي SNR في علاقته مع الزمن والمساحة كعامل محسن لحالة التشوه الحاصل في الصورة لحالة الخط المستقطع والمار بمنطقة متجانسة بيضاء، في حين لم يتحقق التحسين السابق لخط اخر يمر بمناطق لونية مختلفة. بينت النتائج ان افضل عامل احصائي لتمثيل تغاير الشدة اليومي مع الزمن وتغاير الانحراف الشمسي لمنحنيات الشروق/الغروب في علاقات تغاير مركباتها المختلفة للتباين مع المساحة هو المعدل وmx+mn. تم استخدام الخوارزمية الثالثة بالاستناد على الخواص الاحصائية للمناطق المستقطعة من الصورة. بينت النتائج ان مساحة فتحة نافذة الضوء المستخدمة تؤثر وبقوة على توزيع شدة الاطوال الموجية المهيمنة للرؤية النهارية (470، 535 و610 ) نانومتر، حيث حصل انفصال واضح لمنحنيات الشروق والغروب في كل ايام العمل بحالة شدة ثابتة وواطئة عن باقي الفترات لحالة مساحة فتحة نافذة الضوء الصغيرة (10 ×10) سم2 وغير ذلك للمساحة الكبيرة (40 ×40)سم2 | The appearance of a scene illuminated by direct and indirect solar radiation depends on a variety of factors. Among these factors are the viewing geometry, scene structure reflectance, illumination and atmospheric conditions. As time elapses, these factors change altering the appearance of the scene. Sequence images of a scene collected over time are valuable in studying the scene appearance variation. This can lead to novel applications and help in enhancing the existing methods that are leading to environments which can be controlled. So, a focused statistical analysis study to the sequence captured images is introduced. This has been done by utilizing sunlight/skylight as a source to illuminate a scene inside a tilted optical system facing the equator.Analysis of such sequence provides an understanding to the effects that the illumination may cause on system performance. This is achieved by studying the variation of some statistical estimators as a function of time as well as window's aperture area, testing the best quantitative measurements to simulate the diurnal intensity variation with time and hence investigating an illuminance effect upon image's contrast. These aims have been achieved by analyzing such images through the diurnal variation of RGB bands and L - Component. Based on Sobel edge detector's, extracted line's and block's statistical properties, three algorithms have been executed. For an algorithm based on an edge statistical properties and between sunrise and sunset times, a steady state for the diurnal variation of contrast value with time had been obtained. However, there are some exceptional cases. Aerosols in hazy hours and high interior illuminance affect attractively upon contrast's value. In this algorithm, under steady weather condition, using site's latitude as a tilted angle, a significant behavior of the diurnal statistical estimators variation with area of window's aperture strongly noticed in the case of the two equinoxes. The adopted algorithm emphasizes the sun declination at equinoxes and opens a new field of cooperation between astronomy science, data acquisition, optical technique and image analysis to understand our world. A second algorithm, based on the extracted line statistical properties, has been used for image examination. Using this algorithm, the intensity measurements provide vital information on the different types of scattering light under study and hence on the physical nature of the light. Rayleigh and Mie scattering are the dominant effects. Each one, individually, works at certain intervals upon the extracted line intensity values of RGB bands and L - Component. Line's location upon captured image specifies the type of statistical estimator, which can be used in its relationships with time and area of window's aperture to represent the diurnal variation of some physical phenomena. An enhanced statistical estimator for the distortion case has been signified in SNR relationships with time and window's aperture area. This is true for the extracted line that passes through homogeneous white region, while it isn't the case for another one passes through different color regions. Mean and mx+mn estimators are found to be the best statistical estimators to represent the diurnal intensity variation with time and sunrise/sunset sun declination variation curves in their corresponding different contrast parameters variation with area. Based on extracted block statistical properties, the third algorithm has been used. The results show that the area of window's aperture strongly affects the intensity distribution of the dominant wavelengths for human photopic vision (470, 535 and 610)nm. For all dates, the sunrise and sunset curves split with a steady and lowest intensity states from other periods of times for the case of lowest area (10x10)cm2, while it isn't the case for biggest area of window's aperture (40x40)cm2.

التاثيرات الجوية على التصوير الحراري للحزمة 3 - 5 مايكرومتر ATMOSPHERIC EFFECTS ON 3 - 5 ?m BAND THERMAL IMAGING

اسم المؤلف: فاتن شكور زين العابدين
اسم المشرف: علي هادي حسن الحمداني كاظم جواد كاظم
الموضوع العام: علوم الفلك والفضاء
السنة: 2004
الموضوع الدقيق: فيزياء الفلك
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: خلال مرور اشعة الضوء المنبعثة من الاجسام في الغلاف الجوي للارض فانها تعاني من تغير مستمر في اتجاه انتشارها وهذا ناتج عن اضطراب الغلاف الجوي وتغير كثافة الهواء على طول مسار الضوء. لمعرفة ما يحدث لصورة الجسم في الجو فقد قمنا بدراسة تاثير الانكسار الحاصل في مسار الاشعة الحرارية المنبعثة من الاجسام في الغلاف الجوي على الصورة المتكونة بواسطة منظومة التصوير الحراري. لقد تم بناء نموذج جديد للجو لغرض دراسة تاثير الاضطراب الجوي على تصميم منظومة التصوير الحراري. افترضنا الجو في هذا النموذج بانه في حالة اتزان حراري (hydrostatic equilibrium ) وانه يتكون من طبقتين هما التروبوسفير والستراتوسفير. وان كل مكونات الغلاف الجوي خاضعة للقانون العام للغازات. درجة الحرارة افترضت متناقصة بنسبة ثابتة ضمن طبقة التروبوسفير لحد التروبوبوز الذي يصل ارتفاعه الى (11كم) من سطح الارض، ومن ثم تبقى درجة الحرارة فوق التروبوبوزعلى نفس الدرجة التي كانت عليها في التروبوبوز. ان اعلى ارتفاع للستراتوسفير افترض (80كم). تم ايجاد علاقة رياضية لحساب الانكسار كدالة لزاوية السمت ومعامل الانكسار من جهة وعوامل الظروف الجوية ودرجة الحرارة في منطقة الرصد من جهة اخرى. تمت هذه العملية من خلال حل المعادلة الخاصة بكل طبقة ممثلة بتكامل باستخدام قاعدة سمبسون ومن ثم جمع مقدار الانكسار لكلا الطبقتين لينتج الانكسار الكلي للغلاف الجوي. لقد قمنا باعداد برنامج حاسوبي جديد بالاستناد على النموذج الجديد للغلاف الجوي لايجاد زاوية الانكسار الجوي ولقيم مختلفة من زاوية السمت والمدى.اجريت مقارنة لنتائج البرنامج الحالي مع نتائج دراسات اخرى وقد كان هنالك توافق وتقارب جيدين بينهما. ان ميزة البرنامج الحالي انه سهل الاستخدام وبالامكان تغيير النموذج المستخدم فيه بسهولة, حيث ان قيم درجة الحرارة, الضغط, الرطوبة, خط العرض,درجة حرارة الاختبار, الطول الموجي للضوء المستخدم, ودرجة الدقة المطلوبة يمكن ان تغير في البرنامج بسهولة. اجريت دراسة لنفاذية الاشعة تحت الحمراء في النافذة الجوية 3 - 5 مايكرومتر باستخدام برنامج LOWTRAN6 وذلك في المسارين الافقي والمائل وبارتفاعات مختلفة (0.005،1،2،3،5،7،10،20 كم) ولعدة مديات (1،2،3،5،7،10،20 كم). طور البرنامج الحاسوبي Raytracing واستخدم في تصميم منظومة تصوير بصري حراري تعمل في المنطقة الطيفية 5 - 3 مايكرومتر. ثم تم الربط بين البرنامج المعد لحساب زاوية الانكسار في الغلاف الجوي مع برنامج الRaytracing .من خلال هذا الربط تم الحصول على تصميم بمواصفات جديدة التي من ثم ادخلت في البرنامج ZEMAX .تم حساب فرق المسار البصري ودالة الانتقال المعدل وspot diagram للمنظومة الحرارية المصممة قبل تاثير الاضطراب الجوي عليها، كما تم دراسة تاثير تغير المجال على خواص دالة الانتقال المعدل.اخيرا فقد تم دراسة تاثير الاضطراب الجوي على المنظومة من خلال ادخال ستة متغيرات وهي زاوية السمت، ارتفاع الملاحظ، درجة الحرارة، الضغط، الرطوبة النسبية وخط العرض. ومن ثم حساب فرق المسار البصري ودالة الانتقال المعدل وspot diagram مرة اخرى وملاحظة ما يحدث عليها من تغييرات بتغير انكسارية الجو ولعدة قيم من زاوية السمت(5،10،20،30،40،50،60،70،80،90 درجة) ولمديات مختلفة (20,10,7,5,3,2,1,0 كم) | When a light ray that emitted from the bodies, passes through the Earth’s atmosphere it will continuously change its direction of propagation. This is due to the atmosphere turbulence and the variation in the air density along the line of sight. In order to find out what happens to the image of a body in the atmosphere; we have studied the influence of thermal radiation refraction through the atmosphere on the image formed by thermal imaging system. A new atmospheric model was build to study the effect of the atmospheric turbulence on the optical imaging system design. In this model we assumed that the atmosphere in a hydrostatic equilibrium and consisting of two layers, the troposphere and stratosphere and all atmosphere consistence, obeys the perfect gas law. The temperature assumed decreasing at a constant rate within the troposphere, up to the tropopause at about 11km height from the Earth's surface and then above the tropopause the temperature remains constant and equal to the tropopause temperature. The upper height of the stratosphere is taken 80km. A formula obtained for calculating total refraction angle as a function of zenith angle and refractive index, and all meteorological data at the observer. The total refraction angle is the sum of the refraction caused by the troposphere and the stratosphere, each one is given as integral which was calculated by Simoson's rule. Then a computer program was written based on the new atmospheric model for calculating atmospheric refraction angle for different zenith angles and ranges of atmosphere. A comparison was done between the results of the present program and those of other sources. The comparison, indicate a good agreement with these sources. This program is simple to use, and in which the atmospheric model used can be varied easily. The values of temperature, pressure, humidity, latitude, lapse rate, wavelength and a specific accuracy can be changed. The IR transmission in the 3 - 5μm band was studied using the computer code LOWTRAN6 in both the horizontal and slant path at different altitudes (0.005, 1, 2, 3, 5, 7, 10, 20 km) and ranges (1, 2, 3, 5, 7, 10, 20 km). A raytracing program was developed and it was used to design a thermal optical imaging system to work in the 3 - 5μm band. Then the new atmosphere refraction program was combined with the raytracing program. From this combination we obtained a new system design which was entered in the software ZEMAX.The optical path deference, modulation transfer function, and spot diagram were computed for the designed thermal optical imaging system before entering atmosphere turbulance effect. The affection of changing the field on the characteristics of the modulation transfer function was also studied. Finally the atmosphere turbulance effect was studied by entering six parameters, zenith angle, observer height, temperature, pressure, relative humidity, and latitude. The optical path deference, modulation transfer function, and spot diagram were calculated again to estimate, there affection by the atmosphere refraction for different values of zenith angles (5, 10, 20, 30, 40, 50, 60, 70, 80, 90 degree) and ranges (0, 1, 2, 3, 5, 7, 10, 20 km).

تاثير الربط والعزل على المقطع العرضي للايقاف الالكتروني

اسم المؤلف: غفران محمد علوان
اسم المشرف: خالد عبد الوهاب احمد
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: فيزياء الالكترونيات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم عمل صيغة رياضية نظرية لدراسة وحساب تاثير الربط والعزل على المقطع العرضي لقدرة الايقاف الالكترونية عن طريق اخذ ايونات ذات عدد ذري (Z1 > 2) مثل ( O, C, B ) في اهداف من (Al, C, Si) باستعمال ثلاثة انواع من الجهود المؤثرة Veff (Yukawa, Moliere and Universal) ولنوعين من الايونات هي (Stripped, Screened) وتم الحصول على النتائج بالاعتماد على النظرية الثنائية. تمت دراسة قدرة الايقاف بالاعتماد على نوعين من التصادمات، التصادمات القريبة التي تعامل كتفاعلات كولوم الحرة، والناتجة من اعتماد الطاقة المنتقلة ازاء معامل التصادم، والتصادمات البعيدة التي تاخذ في حساباتها طاقة الربط لالكترونات الهدف وذلك عبر التردد الرنيني الكلاسيكي.وبالاعتماد على عامل بور كاباK_B=(2Z_1 v_0)⁄v فقد وجد ان هناك اتساع لحدود نظرية بور عند السرع الواطئة . ان النظرية الثنائية هي تحديث مهم لنظرية بور القديمة، وقد طورت لحساب قدرة الايقاف للايونات الاثقل من الهيليوم في النظام الكلاسيكي. وتم في العمل الحالي حساب المقطع العرضي للايقاف لبعض الايونات الساقطة على الهدف ومقارنة هذه النتائج مع البيانات العملية من برنامج الـ(SRIM2003) المنجزة من قبل Ziegler. وجد ان زاوية التشتت وزمن التصادم دورا مهما في حساب المقطع العرضي للايقاف باستعمال النظرية الثنائية. تم استخدام ثلاث انواع من الجهود في العمل الحالي (Yukawa, Moliere and Universal) لمعرفة تاثير دالة الحاجز φ (r/a) على زمن التصادم وزاوية التشتت. ووجد ان اكبر تاثير ياتي عند مؤثرات التصادم العالية x = ωp/υ ≥1. كما تبين ان النظرية الثنائية لها قابلية التطبيق على مدى واسع من الطاقات عكس الطرق السابقة التي كانت محدودة الطاقات. وقد اعطت الحسابات وفقا للنظرية الثنائية نتائج تقريبية وبدون تحديد لمعامل التصادم الحرج (p_(0 )) بين التصادمات القريبة والتصادمات البعيدة وتفادي تطبيقات نظرية الاضطراب. تم في عملنا هذا كتابة برنامجين بلغة فورتران 90 بمساعدة Compaq Visual Fortran (CVF6.6) لتنفيذه. | A theoretical form for studying and calculating Binding and screening effects of electronic stopping cross - section has been done by taking (Z1>2) like (O, C, B) ions in (Al, C and Si) targets using three types of effective potential Veff (Yukawa, Moliere and Universal) for Stripped and Screened ions. The application of these potentials was done by using Binary’s theory. The stopping power has taken into consideration for the two types of collisions; Close collisions are treated as free - coulomb interactions, resulting in the dependence of the energy transfer versus impact parameter, and the distant collisions are taking into account the binding of target electrons and enter through a classical resonance frequency. At low velocity should be extended to Bohr’s theory are found to be dependent on the factor Bohr Kappa ( The Binary theory is a powerful update of the old Bohr theory. It has been developed to calculate the stopping power of the ions heavier than helium in the classical regime. In the present work, the calculated stopping cross sections for some incident ions in targets are compared with experimental data from SRIM2003 software presented by Ziegler. Scattering angle and time integral play an important role in calculating stopping cross - section when using binary theory. In the present work the three types of potential (Yukawa, Moliere and Universal) have been used to investigate the effects of screening functions φ (r/a) on time integral and scattering angle. Most effect comes at high impact parameters χ = ωp/υ ≥1. The Binary’s theory is applicable for all energy range while the previous work is limited in energy range. Binary theory gives an accurate results with no need to specify critical point ( between close and distant collisions, and application of perturbation theory is avoided. Two programs have been written in Fortran 90 with the aid of Compaq Visual Fortran (CVF 6.6) for executing.

تاثيرات الاشعاع على الخصائص البصرية لاغشية صبغة مثيلين ازرق المطعمة بpva Radiation Effects on Optical Properties of Methylene Blue Dye Doped PVA Films

اسم المؤلف: عمار نجم عبد
اسم المشرف: محاسن فاضل هادي الكاظمي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: اجري هذا البحث على مرحلتين, الاولى هي دراسة الخصائص البصرية والتركيبية لاغشية صبغة المثلين الازرق(Methylene blue) المطعمة ببوليمر بولي فينيل الكحول(PVA) وبنسب تطعيم مختلفة وهي (10, 15, 20, 30, 40) مل من محلول الصبغة وبتركيز(1*10 - 5) مول/لتر. كل النماذج حضرت بطريقة الصب والمرحلة الثانية هي تشعيع هذه الاغشية باشعة كاما وبيتا وبجرع مختلفة ودراسة تاثير انواع التشعيع على الخصائص البصرية والتركيبية لها.حيث وجد ان طيف الامتصاص يزداد بزيادة نسب التطعيم لكل من قمتي الصبغة والبوليمر مع وجود ازاحة باتجاه الاطوال الموجية الاطول (ازاحة حمراء), وتم دراسة فجوة الطاقة البصرية ووجد ان فجوة الطاقة الطاقة للبوليمر تتناقص مع زيادة نسب التطعيم مع ثبات فجوة الطاقة للصبغة وقد تم دراسة الثوابت البصرية الاخرى والتي تشمل (معامل الامتصاص, معامل الخمود, معامل الانكسار, وثابت العزل الكهربائي الحقيقي والخيالي).بعد تشعيع غشاء البوليمر النقي واغشية الصبغة المطعمة بالبوليمر ولمختلف نسب التطعيم باشعة كاما وجسيمات بيتا وجد ان هناك زيادة ملحوضة لطيف امتصاص البوليمر النقي بينما طيف الامتصاص هذا يتناقص لاغشية الصبغة المطعمة بالبوليمر وتعاني ازاحة باتجاه الاطوال الموجية الاصغر (ازاحة زرقاء) مع بقاء قمة امتصاص البوليمر على حالها, اما فجوة الطاقة فقد تناقصت بعد التشعيع للبوليمر وازدادت للصبغة لمختلف الاغشية وقد تم دراسة الثوابت البصرية الاخرى والتي تشمل (معامل الامتصاص, معامل الخمود, معامل الانكسار, وثابت العزل الكهربائي الحقيقي والخيالي).اما الفحوصات التركيبية فقد بين كل من حيود الاشعة السينية (XRD) وطيف (FTIR) عدم وجود تفاعل كيميائي بين الصبغة والبوليمر بعد الخلط وعدم تكسر الاواصر الاساسية لهما بعد التشعيع, واظهرت صور (FESEM) تعرض سطح البوليمر للتكسر وازدادت خشونتة بعد التشعيع بينما لم تتاثر كثيرا سطوح الاغشيه المطعمة من الصبغة والبوليمر بالتشعيع | The present work was carried out in two stages .The first stage was studying the optical and structural properties for methylene blue dye doped poly vinyl alcohol as a host polymer in different doping ratio of dye solution (10, 15, 20, 30, 50) ml with concentration of dye (1×10 - 5) mol/liter. All samples prepared by casting method. The second stage was irradiated all samples by Gamma ray and Beta particles in different doses and studying the optical and structural properties for them. The intensity of absorption spectrum increased with increasing doping ratio of dye solution for peaks of dye and polymer and gave red shift. The optical energy gap for PVA increased with increasing doping ratio of dye solution with remaind the energy gap for dye constant. The optical constants (Absorption coefficient, Extinction coefficient, Refractive index, Real and imaginary dielectric constants) was studied. After Gamma and Beta irradiation pure PVA film and MB/PVA films with different doping ratio of dye solution and found that the absorption spectrum increased for pure polymer, while the absorption spectrum for dye is decreased for MB/PVA films and gave blue shift with remained the absorption peak of polymer constant. The optical energy gap for PVA decreased whereas the energy gap for dye increased after irradiation. The optical constants (Absorption coefficient, Extinction coefficient, Refractive index, Real and imaginary dielectric constants) was studied. The XRD and FTIR showed no interaction between dye and polymer after doping and there are no broken fundamental bands after irradiation. FESEM photographs illustrated that the surface of all films became more roughness after irradiation.

دراسة تاثير المضاف 2 - ميثيل نفثالين على نظام اروماتي (انثراسين / 2 - ميثيل نفثالين) Study of doping effect of 2 - Methylnaphthallen in aromatic system (2 - Methylnaphthallen/Anthracene )

اسم المؤلف: علي كاظم وداي
اسم المشرف: زياد عدنان صالح
الموضوع العام: علوم الفيزياء
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا البحث, اخذ اطياف الفلورة للانثراسين المذاب في دايا ميثيل سلفوكسايد بالتركيزين M] [10 - 3,[10 - 4 M] حيث اظهر اربع حزم اهتزازية واضحة وقد تم تهييجه بطول موجي هو 365nm)) وكذلك تم اخذ طيف ثنائي ميثيل نفثالين النقي المذاب في دايا ميثيل سلفوكسايد وقد اظهر ثلاث حزم اهتزازية وقد تم تهييجه بطول موجي هو (270nm). وقد تمت هذه القياسات بدرجة حرارة الغرفة.اظهرت قياس اطياف الامتصاص والفلورة لمحلول الانثراسين المشوب بثنائي ميثيل نفثالين بنسب مختلفة, بتراكيز مولارية مختلفة تبدء من [10 - 3M] الى [10 - 4M] وبطول مهيج (270nm). واظهرت قياسات اطياف هذه المحاليل تبادلا للشحنة الذي يقود الى انتقال للطاقة من جزيئة المضاف ثنائي ميثيل نفثالين الى جزيئة المضيف الانثراسين باطياف الفلورة عند التراكيز اعلاه. تقود هذه النتائج الى تناقص نسبة انتقال الطاقة المحددة من خلال طريقة ميكانيكية تبادل الالكترون. هذا الانخفاض له عدة اسباب منها وجود الفخاخ (traps) والى الامتصاص الذاتي القوي لبلورة الانثراسين .ان ظهور حافة حادة في طيف الفلورة لجزيئة المضاف (2mn) يشير الى وجود امتصاص ذاتي قوي لطيف هذه الجزيئة مما يؤثر على معدل انتقال الطاقة كما اظهرت النتائج تزايد عامل الكبت مع تزايد التركيز .و يتبين من دراستنا للخصائص الكهربائية والتوصيلة الكهربائية هذه لوجود طاقاتي تنشيط لجزيئة الانثراسين المشوبة بنسب مختلفة من جزيئة ثنائي ميثيل نفثالين ولكل طاقة تنشيط ميكانيكية توصيل مختلفة والمحضرة على الواح كوارتز والزجاج على حد سواء وبتركيز مولاري [5*10 - 2 M], التي يمكن تفسيرها بالاعتماد على نظرية الحزم لشبه الموصل والتي تقترح انتقال حاملات الشحنة من مستوى فيرمي المانح الى حزمة التوصيل في شبه الموصل السالب (n - type) عند درجات الحرارة العالية بواسطة التهيج الحراري . معلمات تركيب الشبيكة للاغشية الرقيقة للانثراسين المشوب بثنائي ميثيل نفثالين التي حللت بواسطة (a LabX XRD 6000 SHIMADZU XR - Diffractometer with Cu Kα radiation) , يظهر تاثير التشويب على الافلام الرقيقة للانثراسين بشكل واضحا. وتم الحصول على نمط الحيود بزاوية (2θ) وتبدء من (20°) الى (60°) وبزاوية مجسمة مقدارها (5°) . وكلاهما ثنائي ميثيل نفثالين المضاف الى الانثراسين كشائبة يظهر طيف حيود الاشعة السينية عمليا قمة حاده وقمتان صغيرتان, وهذا يعني لنا ان الاغشية الرقيقة ذات طبيعة تركيبية متعددة التبلور. | In this research, The fluorescence spectrum of Anthracene dissolved in dimethylslfoxayd was studied then showed four obvious vibrated bands ) λex=365nm). Moreover, the spectrum of pure (2 - Methylnaphthalene) dissolved in dimethylslfoxayd was dealt with and it showed three vibrated bands and it has taken at a wavelength (λex=270nm). The measurements was at the room temperature. The absorption and fluorescence spectra of solutions for anthracene doped with 2 - Methylnaphthalene with different ratios, had been measured with different molarity concentrations starting from the [10 - 3M] to [10 - 4M] and at excited wavelength) λex= 270 nm). The measurements of these solutions spectra showed the electron exchange, which led to the energy transfer from the guest (2 - Methylnaphthalene) to the host (Anthracene) with getting fluorescence at the above concentrations. The results led to a decrease in the rate of the energy transfer calculated in the way of energy transfer through mechanical electron exchange. This decline has several causes including the existence of (traps) and to the strong self - absorption of the anthracene crystal.The appearance of a sharp edge in the fluorescence spectrum of the guest (2 - methyl naphthalene) molecule indicates a strong self - absorption spectrum of this molecule which affects on the rate of energy transfer. Also, the results showed the increasing of the quenching factor with the increasing of the concentration.This study shows the presence of energies activation Anthracene doping different proportions of 2 - Methylnaphthalene which were prepared on a substrate of glass and quartz are both which have been used at molarity concentration [5*10 - 2M]. Each activation energy has different mechanical connecting which could be interpreted by relying on the bands theory of semiconductor which proposes a transition charge which carriers from the fermi donor to the conduction band in the semiconductor negative (n - type) at high temperatures by thermal excitation.The structure and lattice parameters of anthracene dopant 2 - Methylnaphthalene thin films were analyzed by a LabX XRD 6000 SHIMADZU XR - Diffractometer with Cu Kα radiation. The effect of the Anthracene dopant on the structure of the film is clear. Diffraction pattern was obtained with 2θ starting from 20° to 60° at 5° solid angle. In both the as - deposited and Anthracene - doped 2 - Methylnaphthalene thin films, the X - ray diffraction spectra possess one sharp and two small peaks. It means that the film is polycrystalline in nature structure

دراسة التركيب النووي للنوى الزوجية - زوجية ذات الاعداد الكتلية A=82 - 144 باستخدام نموذج IBM - 1 Studying the nuclear structure of even - even (a=82 - 144) isotopes using IBM - 1

اسم المؤلف: علي عبد الاله عبد الجبار العبادي
اسم المشرف: خالد سلمان ابراهيم ايمان طارق العلوي
الموضوع العام: علوم الفيزياء
السنة: 2004
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في البحث الحالي استخدم نموذج البوزونات المتفاعلة الاول(IBM - 1) لدراسة التركيب النووي للنظائر الزوجية - زوجية ذات الاعداد الكتلية (A=82 - 144) . تم استخدام البرنامج (IBSS1.For ) لايجاد مستويات الطاقة وحساب نسبها وانتقالاتها الكامية بالاعتماد على العدد الكلي للبوزونات (N ) . وقد تم تصنيف هذه المستويات حسب مستويات الطاقة (band - g ,β, γ).وكذلك تم تحديد سلوك النظائر بالاعتماد على قيم مستويات الطاقة العملية ونسبها وترتيب الحزم فيها, واظهرت النتائج ان النظائر تنتمي الى التناظرات الديناميكية U(5),SU(3),O(6),U(5) - O(6). كما تستخدم برنامج (IBMTT.For) لحساب احتمالية حدوث الانتقالات الكهربائية رباعية القطب B(E2) وعناصر المصفوفة المختزلة لمؤثر الانتقال الكهربائي رباعي القطب ان المستوي يمتلك شكل متطاول ( prolate) ,بينما ياخذ المستوي الشكل المفلطح ( oblate). كذلك تم حساب احتمالية الانتقالات المغناطيسية ثنائية القطب B(M1),و عناصر المصفوفة المختزلة لمؤثر الانتقال المغناطيسي ثنائي القطب ,باستخدام برنامج M5.For)). استخدمت نتائج حسابات عناصر المصفوفة المختزلة لمؤثر الانتقال الكهربائي رباعي القطب وعناصر المصفوفة المختزلة لمؤثر الانتقال المغناطيسي ثنائي القطب لحساب نسب الخلط δ (E2/M1),و نسب الخلط المختزلة (E2/M1) ,وتعدد القطبية multipolarity)) الخاصة بكل نظير . لقد اظهرت النتائج توافقا جيدا مع القيم العملية المتوفرة واختلافا مع بعض القيم ,حيث ان قيم نسب الخلط في النظائر , , , للانتقالات ( - ),) - ),( - ),( - ),كانت (0.18) - 8.2 - 3),)6.3),)6.6),)على التوالي .بينما اظهرت نتائج النسب في نفس النظائر وللانتقالات نفسها القيم (0.6790) - 12.3470) , ) ,(10.8692) ,(8.8238) على التوالي . كما تم استخدام التركيب الهندسي لنموذج البوزونات المتفاعلة الاول وذلك لحساب طاقات السطوح لبعض النظائر وكانت النتائج متوافقة بشكل جيد مع المخطط المثالي للخطوط الكنتورية | In the present work , the interaction boson model (IBM - 1) was used to study the nuclear structure of even - even (A=82 - 144)isotopes. The (IBSS1.For)program was used to find the energy levels and calculate the energy ratios. The researcher has classified the energy levels according to the (g, β, γ - band), and determined the behavior of these isotopes according to the experimental values of energy levels ,their ratios and bands arrangement . the isotopes are belong to the dynamical symmetries U(5),SU(3),O(6),U(5) - O(6). The (IBMTT.For) program was used to calculate the electric quadrupole probability B(E2) , reduced matrix elements of electric quadrupole operator , and electric quadrupole moments , . Throughout the results of electric quadrupole moments ,the state have a ( prolate) shape while the state have an (oblate ) shape . The values of magnetic dipole transition probability B(M1) and reduced matrix elements of magnetic dipole operator have been predicted by (M5.For) program . The results of reduced matrix element of electric quadrupole and magnetic dipole transition operators were used to calculate delta mixing ratios δ(E2/M1), reduced mixing ratios (E2/M1), and multipolarity for each isotopes. The values of delta mixing ratios in , , , and , for the transitions ( - ), ( - ),( - ) , and ) - ) were (0.18) ,( - 8.3),(6.3),and(6.6) respectively,the present calculations confirmed that ,the values of delta mixing ratios in the same isotopes and for the same transitions are (0.6790), ( - 12.3476) ,(8.8238), and (10.8692) respectively . The geometrical structure of the interaction boson model (IBM - 1) was applied for a chosen isotope to calculate the potential energy surfaces, the results were in good agreement with the typical plots of countor lines and trixial symmetries

معدل التقشر ومتانة الانحناء لمتراكبات ثنائي هيدروكسي بنزين (هيدروكوينون) المدعمة بالالياف Ablative Rate and Bending Strength of Fibers Reinforced Dihydroxy - Benzene(Hydroquinone) Composites

اسم المؤلف: علي زامل منشد
اسم المشرف: بهجت بهلول كاظم
الموضوع العام: علوم الفيزياء
السنة: 2009
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم دراسة معدل التقشر ، التوصيلية الحرارية، متانة الانحناء،و صلادة فيكرز لمتراكبات الفينول نوع ثنائي هيدروكسي بنزين مدعمة بالياف مختلفة (الياف زجاجية نوع E على شكل حصيرة والياف كاربونية مستمرة)،وبنسب حجمية(0%،20%،40%،60%،70%) بدلالة الخواص الحرارية والميكانيكية لتغيرات الكسر الحجمي للالياف.المتراكبات التي خضعت للاختبار كانت مجموعتين هي EGFC، CFC، بالاضافة لمادة الفينول نوع هيدروكوينون(ثنائي هيدروكسي بنزين)HQR. تم استخدام تقنية الكبس الحار لتحضير المتراكبات باستخدام القوالب المارقة تحت الظروف القياسية.استعملت تقنية قرص لي لقياس التوصيلية الحرارية حسب المواصفة البريطانية القياسية لشركة جورج وكرفيه المحدودة. استخدمت تقنية الشعلة الا وكسي - استيلينية لتحديد معدل التقشر وكذلك معامل العزل الحراري حسب المواصفة القياسية ASTM - E285 - 80. وتم استخدام ماكنة Instron لحساب متانة الانحناء حسب المواصفة القياسية ASTM D - 790.واستعمل جهاز الصلادة المجهرية لفيكرز لحساب الصلادة وحسب المواصف القياسية ASTM E92 - 82 . نفذت المحاكاة لحساب معدل التقشر بثلاث ابعاد باستخدام طريقة الفروقات المحددة. اظهرت النتائج بان التوصيلية الحرارية تزداد تصاعديا بتعاقب النسبة المئوية الحجمية للالياف. من خلال النتائج النظرية لاختبار التوصيلية الحرارية التي حسبت من خلال مود يل micro structures وعند مقارنتها مع النتائج العملية تبين القيم النظرية ان هناك تقارب مع النتائج العملية. يسلك معدل التقشر سلوك معاكس حيث يكون اوطا قيمة عند اعلى نسبة مئوية حجمية للالياف ، وتبين العلاقة بين التوصيلية الحرارية ومعدل التقشر اليتين متزاملتين، الاولى مع بداية الاختبار والمميزة بتوزيع مثالي للالياف الذي يدل على الية التشتيت الحراري بالالياف بسبب تكون شبكة من مسارات التوصيلية الحرارية، والثانية التي ترافق اختبار التقشر والمميزة بمظهر تكون الشروخ القصية التي تدل على الية تكون الفحم المبكرة.كما تبين بان متانةالانحناء تزداد تزايديا خطيا بتعاقب النسبة المئوية الحجمية للالياف ، وتعرض العلاقة بين الكسر الحجمي ومتانة الانحناء بروز الية pull - out ، وقد تبين وجود نوعين من الربط بين المادة الاساس والمضافات هما : الربط الضعيف والربط القوي، كما تبين بان الصلادة تزداد تزايديا خطيا بتعاقب النسبة المئوية الحجمية للالياف.جاءت قيم النتائج للمحاكاة لمعدل التقشر اعلى من قيم النتائج العملية، وقد فسر ذلك على ان درجة حرارة لهب شعلة الاختبار (الاوكسي _ استيلينية) العملية لم تصل الى درجة الحرارة الشعلة المستخدمة نظريا، بالاضافة الى تاثير السطح البيني للمتراكبات الذي كان ذو متانة وقوة ارتباط عالية، وقيم الكثافة للمتراكبات تدل على ذلك. وظفت الصور الفوتوغرافية بالاقتران مع الصور المجهرية والكثافة للمساعدة في تفسير النتائج.يتضح من النتائج العملية بان المتراكبات المستخدمة في هذا البحث ذات الكسور الحجمية العالية يمكن استخدامها في التطبيقات التي تحتاج الى تشتت حراري كبير، مقاومة عالية للتهرئة، متانةانحناء وصلادة عالية. | In this work, thermal conductivity, K, ablation rate, Ar, bending strength, σf, and Vickers hardness VHs for phenolic (phenol - formaldehyde) resin, PFR type hydroquinone HQR reinforced with different fibers (,E - glass, as mat , and carbon fibers, as continuous) have been studied, in terms of thermal and mechanical properties, which are subject to change in different fibers volume fraction.The composites candidates for this work were two groups; E - glass fibers composites (EGFC), carbon fibers composites (CFC), besides, pure matrix phenolic resin PFR type HQR. Hot - press technique was used to prepare the composites as well as hydroquinone specimens using flash molds at standard conditions.Lee’s disk technique was used to measure thermal conductivity. Oxy - acetylene flame technique was used to determine ablation rate as well as thermal insulator index according to ASTM - E285 - 80. Instron machine was used to measure bending strength according to ASTM - D790.Microhardness Vickers machine was used to determine the hardness according to ASTM - E92 - 82. Simulation programs of heat transfer in three dimensions of ablative test for hydroquinone and hydroquinone composites specimens were carried out using finite difference method.Thermal conductivity results show that K values increase progressively by succession of volume fraction of fibers. Ablation rate behaves inversely, where it drops at high volume fraction of fibers. The thermal conductivity - ablation rate relationship displays two mechanisms. First, associated with the starting of test is recognized by ideal distribution of additives, which leads to thermal dispersion due to the formation of segregated network of thermal conducting paths. Second mechanism is associated with ablation test recognized by shearing cracks appearance, which leads to earlier char production mechanism.Bending strength results show, that σf increases progressively by succession of volume fraction of fibers. The bending strength - volume fraction relationship displays two mechanisms according to the kind of fibers. Where, it can be observed, pullout mechanism with respect to fibers composites. It is shown that there are two kinds of bonding between the matrix and the fibers; weak - bond and strong - bond. The composites were broken through tension down the specimen and compression upper the specimen and shearing fracture mechanism. Hardness Vickers results show that HVs increases progressively by succession of volume fraction of fibers.Ablation simulation results values coming higher than experimental results value. This could be explained as the interface affect of composites, which had high strength and strong bond force, and density values evidence to that.Optical micrographs, coupled with auxiliary microscopy, and densities were employed to aid interpretation of results. The composites under the study can be used in applications, which need high thermal dispersion, high ablation resistance, and high bending strength
1 ... 4 5 6 7 8 ... 13