عرض: 25 50 75 100 النتائج

نتائج البحث: 25 من أصل 427

دراسة تاثير استبدال (Y2O3,Sb2O3,SrO) على الخصائص التركيبية والكهربائية للمركب فائق التوصيل HgBa2Ca2Cu3O8 == Study the effect of (Y2O3,Sb2O3,SrO) substatution on the structural and electrical properties of the HgBa2Ca2Cu3O8+? superconductor compound

اسم المؤلف: نور قاسم فاضل
اسم المشرف: كريم علي جاسم
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تتضمن الدراسة تاثير الاضافات (SrO or Y2O3 or Sb2O3) على الخواص التركيبية والكهربائيه للمركب الفائق التوصيل . [Hg 1223] تم حضير النماذج الاتيه HgBa2 - xSbxCa2Cu3O8+δ) وHgBa2 - xYxCa2Cu3O8+δو (HgBa2 - xSrxCa2Cu3O8+δ ولقيم x=0, 0.1, 0.2, 0.3 بطريقه تفاعل الحاله الصلبة.وقد درس الخصائص التركب البلوري باستخدام حيود الاشعة السينية ( XRD ) واظهرتحليل حيود الاشعة السينية ان جميع العينات ذات تركيب (tetragonal) تحوي على اطوارتركيبه فائقه التوصيل منخفضة (1212و1201) وعالية (1223) , وان النسب الطوريه ) نسبه الطورالعالي 1223) تزداد عند الاستبدال. كذلك وجد بان قيمة الثابت الشبيكة (c) يقل عند استبدال (SrO or Y2O3 or Sb2O3) في موقع الباريوم.حيث ان قيمه ثابت الشبيكه c للمركب HgBa2 - x(Sr or Sb or Y)x Ca2Cu3O8+δ ل x=0 هي c=15.75 ,في حين عند استبدال Srتنخفض قيمه ثابت الشبيكه cالى c=15.3510 (x=0.1), 15.3811 (x=0.2), 15.4431 (x=0.3),كذلك تنخفض قيمه ثابت c عند استبدال Sbالى 15.3417 (x=0.1), 15.4274 (0.2), 15.4432 (x=0.3).عند استبدال Yتنخفض قيمه ثابت الشبيكه cالى15.353 (x=0.1), 15.397 (0.2), 15.473 (x=0.3). . لحساب درجه الحراره الحرجه تم دراسة المقاوميه الكهربائيه باستخدام تقنيه القطاب الاربعة, حيث وجد ان درجه الحرارة الحرجه تزاد عند استبدال SrO وY2O3 وSb2O في موقع الباريوم وان اعلى درجه حرارة حرجة تم الحصول عليها عند استبدال Srوهي 138 كلفن. في درجة حرارة الغرفة تم قياس ثابت العزل الكهربائي كداله للتردد في المدى (Hz50 - 1MHZ), قد وجد ان ثابت العزل الكهربائي للتردد HZ 50 هو 45.489، بينما عند استبدال (Sr)ينخفض ثابت العزل الكهربائي الى 45.1715 (x=0.1)، 24،2123 (0.2x=) ,16.82781313 (x=0.3)، وانخفض ايضا ثابت العزل الكهربائي عند استبدال (Sb) الى 12،708 (x=0.1)، 10.339 (0.2x=) ,10.816 (x=0.3) لكن عند استبدال (Y) ثابت العزل الكهربائي يزداد الى 63.3682 (x=0.1) الى 26،378 (x=0.3). | The present thesis includes effect of (SrO, Y2O3 and Sb2O3) substatution on the structural and electrical properties of the [ Hg - 1223] compounds. Which have prepared the superconducting compounds HgBa2Ca2Cu3O8+δ ,HgBa2 - xYxCa2Cu3O8+δ, HgBa2 - xSbxCa2Cu3O8+δ and HgBa2 - xSrxCa2Cu3O8+δ (x=0.1,0.2,0.3) by useing Solid state reaction method. The crystal structures for all the specimen have been determined by of X - ray diffraction. Shows the XRD that all specimen have tetragonal structures correspond to the high [ Hg - 1223] and low - phase[ Hg - 1201 and Hg - 1212], and there is a decrease in c - parameter value when substituted of (Sb2O3 or SrO or Y2O3) in Barium site, where that c - parameter value of HgBa2 - x(Sr or Sb)x Ca2Cu3O8+δ for x= 0 is c=15.75, while at substatution (Sr) decreased c - parameter value to c=15.3510 (x=0.1), 15.3811 (x=0.2), 15.4431 (x=0.3), also decreased c - parameter value at substatution (Sb) to 15.3417 (x=0.1) , 15.4274 (0.2) and 15.4432 (x=0.3), at substatution (Y) decreased c - parameter value to 15.353 (x=0.1) , 15.397 (0.2) and 15.473 (x=0.3). while the volume fraction of the high - Tc phase increased with the increase of (Sb2O3 or SrO or Y2O3) content. Electrical resistivity was used to find the critical temperature using the four - probe technique, found that transition temperature which it increased when substituted (Sb2O3 or SrO or Y2O3), and we get a highest critical temperature is 138k. The dielectric constant have been measured and is a function of applied frequencies ( range of 50 Hz to 1MHz) at room temperature HgBa2 - x(Sr or Sb)x Ca2Cu3O8+δ for x= 0. It was found that the dielectric constant of at the frequency 50Hz is 45.489 , while at addition(Sr) decreased dielectric constant are 45.1715 (x=0.1) , 24.2123(0.2) and 16.82781313 (x=0.3),also decreased dielectric constant at addition(Sb) to 12.708 (x=0.1) , 10.339(0.2) and 10.816 (x=0.3).but when addition(Y) dielectric constant increasing are 63.3682 (x=0.1) to 26.378 (x=0.3). It was found that dielectric loss factor (tan) of all specimens decreased with the increase of frequency.

دراسة خصائص التفاعل النووي (?,n) للنوى الفردية - الزوجية Z?29) ? 21) == Studying the Properties of Nuclear Reaction (?,n) for Odd - even Nucleus (21?Z?29)

اسم المؤلف: نور عادل محمد
اسم المشرف: فاطمة عبد الامير | سميرة احمد
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: الدراسة الحالية تركزت على دراسة الخواص النووية للتفاعل النووي (الفا, نيوترون ) لنويات الهدف ذات الاعداد الذرية الفردية وللتفاعلات ( (_21^45)Sc(α,n)(_23^48)V, (_23^51)V (α,n) (_25^54)Mn , (_25^55)Mn(α,n)(_27^58)Co , (_27^59)Co(α,n)(_29^62)C , (_29^63)Cu(α,n)(_31^66)Ga (من خلال حساب المقاطع العرضية لتفاعلات (الفا , نيوترون ) للتفاعلات المذكورة اعلاه والمنشورة في الادبيات العالمية ( EXFOR , ENDF , JEF , JEFF , GENDL) لانتقاء الطاقات الملائمة في حساب التفاعل للمستوى الارضي باستعمال على برنامج الحاسوب ( (Matlab - 7.6 وبخطوات طاقية معينة . تم رسم وجدولت النتائج المستحصلة من تطبيق المعادلات شبه التجريبية لتمثيل جميع التفاعلات التي تربط بين تغير المقطع العرضي مع مدى الطاقة المعين . بالاضافة الى حساب وجدولت بعض الخواص النووية للنظائر الموجودة في هذه التفاعلات كما وتم حساب وجدولت كل من طاقة التفاعل وطاقة العتبة لكل تفاعل ومقارنتها مع النتائج الموجودة في مركز الدراسات النووية (NNDC) وهي متوافقة معها بشكل جيد جدا . وكذلك تم حساب قدرة الايقاف باستعمال برنامج SRIMو تم حساب الحاصل النيوتروني وفقا لصيغة زكلر لكل تفاعل بالاستعانة بقدرة الايقاف . وقد استعملت قيم المقاطع العرضية لتفاعلات (الفا ، نيوترون) في حساب المقاطع العرضية لتفاعلات العكسية (نيوترون ،الفا) وللمستوى الارضي وذلك باشتقاق المعادلة شبه التجريبية لقيم المقاطع العرضية العكسية لكل من التفاعلات الاتية (_23^48)V(n,α) (_21^45)Sc , (_25^54)Mn(n,α)(_23^51)V , (_27^58)Co(n,α)(_25^55)Mn , (_29^62)Cu(n,α)(_27^59)Co , (_31^66)Ga(n,α)(_29^63)Cu وايجاد الثوابت لكل تفاعل. تم رسم وجدولت النتائج المستحصله وايجاد معادلة ملائمة للرسم التي يمكن من خلالها الحصول على مقاطع عرضية بطريقة مباشرة وسريعة وبسيطة وموثوقة | This work was concerned on study the properties of (alpha, neutron) reactions for nuclei that’s have odd atomic number in nuclear reactions [(_21^45)Sc(α,n)(_23^48)V,(_23^51)V (α,n),(_ 25^54)Mn (α,n)(_27^58)Co, (_27^59)Co(α,n)(_29^62)Cu ,(_29^63)Cu(α,n)(_31^66)Ga] , by calculating the cross sections of (alpha, neutron) reactions. The nuclear reactions were published in the world libraries (EXFOR , ENDF , JEF , JEFF , GENDL) most recent to select the suitable energies in calculating reverse nuclear reactions for ground state. In the present work, the cross sections were calculated from semi - empirical formula which were obtained and listed in tables using computer programs(matlab 7.7R2008). These formulas represent the variation of the cross section with energy, which could be used to predict the values of uncalculated cross sections. The stopping power according to Zeigler formula was used in order to obtain the neutron yield for each nuclear reaction. Neutron yield is very important to determine the best way to produce specific isotopes. The evaluated cross sections for (α,n) are used to calculate the cross sections for inverse reactions (n,α) using empirical formula of the inverse cross sections .The values of neutron energy and inverse cross sections have been drown and listed in tables. Qo - value, threshold energy, reduced mass and binding energy have been calculated and listed in tables for each reaction

معالجة كفاءة الكاشف الوميضي السائل NE213 باستخدام طريقة مونت كارلو == The Efficiency Treatment of the NE213 Liquid Scintillator Detector Using Monte Carlo Method

اسم المؤلف: نعمة حافظ ثابت البهادلي
اسم المشرف: علاء باقر كاظم | ابراهيم رمضان عاكول
الموضوع العام: علوم الفيزياء
السنة: 2005
الموضوع الدقيق: الفيزياء التطبيقية
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا البحث معالجة كفاءة الكاشف الوميضي العضوي السائل NE213 للنيوترونات السريعة في المدى الطاقي Mev (0.1 - 15) باستخدام طريقة مونت كارلو، حيث تم بناء برنامج (MCOSE) على افتراض محاكاة التفاعلات التي تحدث بين النيوترونات والمادة الوميضية للكاشف، وهذه التفاعلات هي، الاستطارة المرنة للنيوترونات من قبل الهيدروجين والكاربون، الاستطارة غير المرنة من قبل نوى الكاربون والتفاعلين C12(n,n1) C12*  3α, C12(n, α) B9e.تم في هذا البحث ايضا، تم معالجة كفاءة الكاشف NE213 للنيوترونات بحجوم كبيرة. ان استجابة الكاشف NE213 للنيوترونات لاتتشكل فقط بسبب الاستطارة المرنة للنيوترونات من قبل نوى الهيدروجين. بل ان شكل دالة الاستجابة يعتمد ايضا على البروتونات المترسبة من حجم الكاشف، الاستطارة المضاعفة للنيوترونات من قبل نوى الهيدروجين والاستطارة (المرنة وغير المرنة) من قبل نوى الكاربون. البروتونات المترسبة من حافة التاثير ذات اهمية كبيرة للحجوم الصغيرة من الكواشف الوميضية.كتب البرنامج بلغة (FORTRAN - 77)، قورنت النتائج الحالية لحساب كفائة الكاشف الوميضي NE213 مع البيانات العملية لقياس الكفاءة لثمانية عدادات وميضية بابعاد (8.5 × 100)cm وقد اوجدت هذه المقارنة توافقا جيدا من حيث السلوك والتقارب بين حساباتنا وتلك القياسات، واخيرا نسبة الخطا في الحسابات الحالية للكفاءة هي اقل من (2%) كمعدل في كل عملية تنفيذ. | In the present work, we have been used efficiency treatment of the organic liquid scintillator detector NE213 for fast neutrons in energy range (0.1 - 15)Mev using the Monte Carlo Method.MCOSE program have been used on considers the simulation of neutrous reactions with scintillator detector material; neutrons elastic scattering on hydrogen and carbon nucleus, inelastic scattering on carbon nucleus and the reactions : C12(n,n1) C12*  3α, C12(n, α) B9e.In this work, also have been used the efficiency treatment the big volumes of NE213 detector for neutrons (~1m). The response of the NE213 detector for neutrons is formed not merely due to the neutrons elastic scattering on hydrogen nucleus. The response function shape also depends on proton leakage from detector volume, double scattering on hydrogen and scattering (elastic, inelastic) on carbon nuclous. The proton leackage is an edge effect, which is most important for small volumes of scintillator detectors.The program has been written in FORTRAN - 77 language. The calculations results were compared with experimental data of the efficiency measurements, for eight NE213 (8.5 × 100)cm liquid scintillator detector.One can see a good agreement between our results and the experimental data. Finally, the average percentage error of the efficiency values in our calculations results was less than (2%).

تحضير ودراسة بعض الخصائص الفيزيائية لاغشية (Bi2O3 : Al) الرقيقة بطريقة التبخير الحراري في الفراغ == Preparation and study of some Physical properties for( Bi2O3 : Al) Evaporated Thin Films under vacuum

اسم المؤلف: نصر عيسى نجم
اسم المشرف: بشرى كاظم حسون الميالي
الموضوع العام: علوم الفيزياء
السنة: 2017
الموضوع الدقيق: الاغشية الرقيقة
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: حضرت اغشـيــة ( Bi2O3 ) على قواعد زجاجية بسمــك مختلـف( 450 , 350 , 250 ) nm وبـدقـة تصـل الـى ( ∓ 20 ) nm والمشـوب بمادة الالمنيـوم ( Al ) وبنسـب تشـويب مختلفة ( 3 , 2 , 1 ) % عنـد السمك ( 20 ∓ 450 ) nm والمحضرة بطريقـة التبخـر الحـراري في الفراغ وقد كان معدل ترسيب ( 1.20 nm / sec ) ,اضافة الى ذلك تم اكسدة اغشية البزموث ( Bi ) بدرجة حرارة ( 523 ) K وبزمن لا يزيد عن ساعة واحدة بوجود الهواء , وتـم دراسـة تاثيـر التلديـن علـى الخـواص التركيبيـة والبصـرية للاغشيـة النقيـة والمشـوبـة بـدرجات حــرارة ( 773 , 673 , 573 , R.T ) K ولمدة ساعة واحدة . استخـدمـت تقنية حيـود الاشعة لدراسـة الخصائص التركيبية للاغشية المحضرة واظهرت نتائج قياس حيود الاشعة السينية ( X - ray ) ان جميـع الاغشيـة المحضـرة النقيـة والمشوبـة تكون ذات تركيب متعـدد التبلـور ومـن النـوع الرباعـي والاتجاه السائد (201) لكل الاغشية المحضرة وزيادة معدل الحجم الحبيبي بزيادة سمك الغشاء , وهذا ما اشارت اليه قياسات مجهر القوة الذرية (AFM) كذلك يزداد معـدل الحجـم الحبيبي بزيادة نسب التشويب ما عدا النسبة ( 3 ) % . اظهرت الخصائص البصـرية ان النفاذية تتغير مع تغيـر كـل من سمك الغشاء ودرجة حرارة التلدين ونسب التشويب بالالمنيوم , وكذلـك تـم ايجاد فجـوة الطاقـة البصـرية للاغشيـة كافة فتبيـن انها مـن النـوع المباشـر المسموح لجميع الاغشية المحضرة وتزداد مع زيادة سمـك الغشاء, بينما تقـل مـع زيادة كـل من درجة حرارة التلدين ونسب التشويب عدا النسبة ( 3 % ) . اضافـة الى ذلـك تم حساب قيـم الثـوابـت البصريـة مثـل (معامل الامتصاص ومعامل الانكسار ومعامـل الخمـود وثابـت العـزل المعقد (الحقيقي والخيالي ) والتوصيلية الضـوئية ) كدالة الاطوال الموجية ( 1100 - 300 ) nm للاغشـية المحضرة . | This research includes studying the structural and optical properties of pure Bismuth Oxide ( Bi2O3 ) thin film at different thicknesses ( 250 , 350 and 450 ± 20 ) nm and doped by Aluminum ( Al ) of ( 450 ± 20 ) nm thickness with different doping ratios ( 1 , 2 , 3 ) % which is prepared by thermal evaporation method from depositing Bismuth film on glass substrates at R.T ( 300 ) K with deposition rate ( 1.20 nm / sec ) then oxidation Bismuth films at ( 523 ) K for one hour in air , Also it includes studing the effect of annealing temperature at ( R.T , 573 , 673 and 773 ) K for one hour on structural and optical properties for pure and doped films . The results of x - ray diffraction have been showed that pure and doped prepared films have polycrystalline structure with tetragonal phase with preferred orientation ( 201 ) for all prepared films the grain size increases with the increase of film thickness and this is in agreement with ( AFM ) measurements also it increases after doping except at ratio ( 3 % ) . This research also includes studing the optical properties of prepared pure and doped films . The transmission and absorption values changed with the changing of film thickness , annealing temperature and doping ratio with ( Al ) , the optical energy gap for allowed direct transition was evaluated and it increases with the increase of film thickness while it decreases with annealing temperature and doping percentage by ( Al ) except ratio ( 3 % ) . The optical properties results include calculating the optical constant (absorption coefficient , refractive index ,extinction coefficient, dielectric Constant with two parts real and imaginary and optical conductivity ) in the range of wave length ( 300 - 1100 ) nm for pure and doped films before and after annealing

تحضير ودراسة متراكبات بوليمرية مدعمة من نوع PMMA/Graphene وPMMA/ZnO النانوية == Preparation and Studying of Polymeric Reinforced Composites Type PMMA/Graphene and PMMA/ZnO Nanoparticles

اسم المؤلف: مصطفى عبد الكريم جهاد الاوجي
اسم المشرف: تغريد مسلم مريوش الساعدي
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم تحضير مساحيق نانوية بطريقة هامر وطريقة الصول - جل , اذ تم تحضير رقائق الكرافين باختزال اوكسيد الكرافين المحضر بطريقة هامر باستعمال مسحوق وقضبان الكرافيت , بينما حضر اوكسيد الزنك النانوي بطريقة الصول - جل . كما تم تحضير متراكبات بوليمرية نانوية بهياة اغشية سميكة بسمك نحو (0.206mm) وبهياة (Bulk) بطريقة الخلط والصب اليدوي (Hand lay - up) باستعمال راتنج بولي ميثيل ميثاكرليت (PMMA) كمادة اساس ورقائق الكرافين او اوكسيد الزنك كمادة تدعيم وبنسب وزنية (0.1,0.3,0.5,1,2)% .تم اجراء الفحوص التشخيصية للمساحيق النانوية والاغشية النقية والمدعمة باستخدام تقنيات (XRD,SEM,EDX,DLS) . اظهرت نتائج قياسات حيود الاشعة السينية ان جميع المساحيق النانوية المحضرة ذات تركيب بلوري متعدد التبلور ومن النوع السداسي , واظهرت انماط حيود الاشعة السينية ذروتين بالنسبة لاوكسيد ورقائق الكرافين بالمدى الزاوي (5 - 70)ᵒ للسطح (001) لاوكسيد الكرافين و(002) , (100) لرقائق الكرافين , بينما اوكسيد الزنك اذ ظهرت له ثمان ذروات عند المدى الزاوي (20 - 80)ᵒ للسطوح الثلاثة الاكثر شدة هي (100),(002),(101), كما اظهرت نتائج الحيود ان للاغشية النقية والمدعمة هيمنة الاتجاه (002) بالنسبة للاغشية المدعمة برقائق الكرافين ، بينما يهيمن الاتجاه (100) بالنسبة لاغشية المدعمة باوكسيد الزنك النانوي , كما اظهرت حسابات الحجم الحبيبي ان هناك تناقصا واضحا بزيادة نسب التدعيم .اوضحت نتائج فحوصات (DLS) ان الحجم الحبيبي لرقائق الكرافين كان بحدود 200nm , بينما كان الحجم لاوكسيد الكرافين 20nm واوكسيد الزنك بحدود 15.8nm , اما صور (SEM) فقد اظهرت اوكسيد الكرافين بشكل تكتل زغبي بينما الكرافين بشكل رقائق او صفائح اما اوكسيد الزنك بشكل شبه كروي وقضبان نانوية ذات اطوال مختلفة . اما بالنسبة لفحص (EDX) فقد ظهرت قمة عالية للكاربون عند (1.8 KeV) لمسحوق الكرافين واوكسيد الكرافين كما ظهرت قمة للاوكسجين (0.53KeV) تعود لاوكسيد الكرافين , اما اوكسيد الزنك فقد اظهر قمة عالية عند (1.1KeV) تعود للزنك وقمة عند (0.53KeV) تعود للاوكسجين .كما تضمن البحث دراسة الخواص البصرية للاغشية المحضرة منها قيمة فجوة الطاقة البصرية للانتقالات الالكترونية المباشرة المسموحة , وكذلك تم حساب معامل الامتصاص والانعكاسية ودراستها من خلال طيفي الامتصاصية والنفاذية ضمن مدى الاطوال الموجية (300 - 1100)nm , واظهرت النتائج ان قيم فجوة الطاقة البصرية تقل مع زيادة نسب التدعيم بالنسبة للكرافين واوكسيد الزنك ZnO.شملت نتائج القياسات البصرية ايضا حساب الثوابت البصرية المتمثلة (معامل الانكسار , ومعامل الخمود , وثابت العزل الكهربائي بجزايه الحقيقي والخيالي ) , ووجد ان هناك زيادة في قيم معامل الخمود ومعامل الانكسار بزيادة نسبة التدعيم .كما تم دراسة الخواص الحرارية والميكانيكية للمتراكب البوليمري المدعم بالمواد النانوية , ولوحظ ان الصلادة ودرجة الانتقال الزجاجي تزدادان بزيادة نسبة التدعيم . | In this study , nanopowders prepared by using Hummer's and Sol - Gel methods , Graphene was prepared by Hummer's method using graphite powder and rods graphite , while zinc oxide was prepared using Sol - Gel method. Nanocomposites were prepared in form of thick films with thickness (0.206)mm and (Bulk) by blend and (Hand lay - up) methods using resin (PMMA) as a matrix and graphene flakes or zinc oxide as reinforced materials . The nanopowders , pure and reinforced films were characterized by using the techniques (XRD,SEM,EDX,DLS) , the results of XRD exhibit in the angular range (5 - 70)ᵒ grahene oxide with surface (001) while graphene flakes have two peaks in (002) and (100) , zinc oxide in angular range (20 - 80)ᵒ exhibits eight peaks with three high intensity surfaces (101) , (002) and (100). While XRD results showed the pure and reinforced films with dominance of (002) surface in films reinforced by flakes and dominance of (100) surface in films reinforced by nano zinc oxide . DLS test showed that the particles size of graphene flakes is in the range 200nm and graphne oxide is in 20nm while zinc oxide is 15.8nm . SEM images showed graphen oxide has the form of agglomerated and graphene like flakes or plates while ZnO has semispherical and nanorods form with different lengths. EDX test showed that all powders have strong peaks , high carbon peak exhibits at (1.8KeV) while zinc exhibits at (1.1 KeV) with oxygen peak at (0.53KeV) for both graphene oxide and ZnO , and we saw other small peaks represent impurities with small weight percentages that exhibited during the preparation . Optical properties was studied for preparing thick films from absorptance and transmittance spectrum for the range (300 - 1100)nm. Results showed the energy gap is decreased by the increase of the concentration of reinforced material , the reflectance and the absorption coefficient were calculated by this spectrum .And we calculated other optical constants like refractive index, extinction coefficient and dielectric constant in its two parts .Also we saw the extinction coefficient and refractive index increase with the increase of the concentration.This work included thermal and mechanical properties. The results showed the hardness and the degree of glass transition which increased with the increase of the concentration .

تقييم كفاءة خلية شمسية من مادة السيليكون ذات اخاديد مختلفة الشكل باستخدام برنامج زيماكس == Efficiency Evaluation of Different Grooves Silicon Solar Cell Using ZEMAX

اسم المؤلف: مريم ازهر علي غالب
اسم المشرف: علاء بدر حسن
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: فيزياء الطاقة الشمسية
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا البحث تصميم خلية شمسية سليكونية ذات اخاديد تلامس سطحها العلوي لزيادة كفاءة الخلية عن طريق تقليل الانعكاسية للاشعة الساقطة، وكذلك زيادة طول المسار البصري للاشعة وتقليل عدد الاشعة الساقطة بزاوية اقل من الزاوية الحرجة، وبالتالي زيادة فرصة امتصاص الفوتونات داخل الخلية. تكون الاخاديد مصنوعة من السليكون وتضاف الى سطح الخلية الشمسية، حيث تلامس سطحها العلوي، وصممت بخمسة اشكال هي : ( الاول : خلية شمسية ذات اخاديد مثلثة الشكل متغيرة عرض القاعدة، والثاني : خلية شمسية ذات اخاديد مثلثة الشكل متغيرة عرض الراس، والثالث : خلية شمسية ذات اخاديد مستطيلة الشكل متغيرة الارتفاع، والرابع : خلية شمسية ذات اخاديد مستطيلة الشكل متغيرة العرض، والخامس : خلية شمسية ذات اخاديد نصف كروية الشكل ). ويوضع اسفل كل خلية كاشف له ابعاد تساوي ابعاد الخلية يكون متحسسا للضوء المرئي والاشعة تحت الحمراء الذي يتوافق مع نفاذية السيليكون حيث كلما ازدادت الانعكاسات الداخلية للخلية ازدادت قراءة الكاشف، وبالنتيجة يمكن معرفة مقدار كسب الاشعة من خلال زيادة طول المسار البصري لها. صممت الاخاديد لقيم مختلفة من نسبة المظهر وهي (0.5 - 0.6 - 0.7 - 0.8 - 0.9 - 1 - 1.2 - 1.4 - 1.6 - 1.8 - 2)، وعند كل نسبة مظهر يتغير طول الاخدود (Z) مرة وعرض الاخدود (W) مرة اخرى، اذ تساعد هذه الاخاديد على تقليل الانعكاسية وزيادة طول المسار البصري، وبالتالي رفع كفاءة الخلية الشمسية. صممت الخلايا الشمسية في هذا البحث باستخدام برنامج (زيماكس) للتصاميم البصرية حيث استخدم نظام تتبع الاشعة غير المتسلسل وكان عدد الاشعة المستخدم في البرنامج نحو (1000) شعاع يسقط بصورة عمودية على الخلية ( ͦ 0 = ϴ)، وتم استخدام زاوية ميلان الاشعة الساقطة بحدود ( ͦ 10 - ͦ 80 ) باتجاهين الاول موازي والاخر مقاطع للاخاديد، وذلك لمعرفة تاثير زاوية السقوط على كفاءة الخلية ومدى تاثير الاخاديد على زاوية السقوط. وبعد هذا العمل والدراسة فيه تم التوصل الى ان افضل نموذج من هذه النماذج الخمسة والاكثر كفاءة هو نموذج خلية شمسية ذو اخاديد نصف كروية الشكل اعطى اعلى قراءة كاشف (3500) شعاع اي ثلاثة اضعاف ونصف العدد الاصلي ، ويليه ثانيا نموذج الخلية الشمسية ذات الاخاديد المثلثة الشكل متغيرة عرض القاعدة حيث اعطى اعلى قراءة كاشف (2500) شعاع اي يعادل مرتين ونصف العدد الاصلي من الاشعة الساقطة، ثم يليه ثالثا نموذج الخلية الشمسية ذو الاخاديد المثلثة الشكل متغيرة عرض الراس وتصل اعلى قراءة كاشف (1400) شعاع، ويليه نموذج الخلية الشمسية ذات الاخاديد المستطيلة الشكل بنوعيها وتصل اعلى قراءة كاشف (1000) شعاع اي العدد الاصلي نفسه من الاشعة الساقطة. ونلاحظ انه عند تغير الزاوية تظهر قراءة الكاشف بهبوط تدريجي. يكون توزيع الاستضاءة للنماذج بوجود تفاوت طفيف في توزيع الاشعة على الخلية، مما يثبت ان توزيع الاستضاءة منتظم لكل ابعاد الخلية. | In this work silicon solar cell has been designed with grooves texture it's upper surface to increase efficiency by reducing reflection of rays and increasing optical path through the cell and subsequently increasing absorption photons into the cell. The grooves is designed from silicon and appended to the upper surface of solar cell. There are five samples have been designed : triangle shape grooves solar cell with variable base, triangle shape grooves solar cell with variable apex, rectangular shape grooves solar cell with variable height, rectangular shape grooves solar cell with variable width, and semicircular shape grooves solar cell. There is detector positioned at the bottom of the cell which has sensitivity for visible light and ir that appropriate with silicon optical transmission and whenever increase internal reflections for cell increase the detector reading then the result it the quantity of ray from increasing optical path. The grooves designed of variable value of aspect ratio (0.5 , 0.6 ,0.7 ,0.8 , 0.9 ,1 , 1.2 ,1.4 , 1.6 , 1.8 and 2) and at any aspect ratio value either grooves length (z) or grooves width (w) variant. The grooves decrease the reflection and increasing optical path through the cell and subsequently increasing solar cell efficiency. In this work, solar cell has been designed by using non - sequential ray tracing mode software program for optical design (zemax). The number of rays used in the program (1000) rays incident vertically on the cell ( ͦ 0 = ϴ) and used incident ray bevel angle( ͦ 10 - ͦ 80 ) in two directions parallel and cross with the grooves to explanation the effect of incident angle on cell efficiency and grooves effect range on incident angle. The best model achieved the five models and (more efficiency) it semicircular shape grooves that gives detector reading (3500) rays equal three times and half of grand number of incident rays, and then triangular shape grooves with variable base that gives detector reading (2500) ray equal twice and half of the grand number of incident rays, and then triangular shape grooves with variable apex that gives detector reading (1400) ray, and then rectangular shape grooves that gives detector reading (1000) ray equal the grand number of incident rays. Obviously increasing angle caused graduated detector reading. The illuminance distribution shows variation of rays distribution on the cell that give uniform illuminance distribution for all cell dimensions.

نماء وميزات بلورات K2SO4 المطعمة بايونات النحاس Cu+2والحديدFe+2 == Crystal Growth and Characterization of Doping K2SO4with Copper Cu+2and Ferrite Fe+2 ions

اسم المؤلف: مريم عيسى فيصل
اسم المشرف: طارق عبد الرضا علوان الظاهر
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: نماء بلورات احادية لكبريتات البوتاسيوم النقية والمطعمة بايون النحاس (Cu+2) وايون الحديد (Fe+2) الناتجة عن كبريتات البوتاسيوم K2SO4 بوصفها مادة اساس وباضافات محددة من كبريتات النحاس CuSO4.5H2O وكبريتات الحديدوز FeSO4.7H2O بنسب وزنية (1% ,2% ,3% ,5%)بوساطة تقنية التبخر البطيء للمحلول المائي في درجة حرارة الغرفة لكونها سهلة وتعطي نتائج ذات جودة مقبولة , وبمولاريةM=1 وبابعاد (9x3x2)mm3 لبلورة K2SO4 النقية وبابعاد (28x18x4)mm3 بعد اعادة التبلور , ودراسة اثر التطعيم في النماء البلوري والخصائص التركيبية , ففي حالة التطعيم بكبريتات النحاس اذ كانت ابعاد اكبر بلورة بعد اعادة التبلور عند التطعيم بنسبة 3% ,2%)) وهي (14x12x9) mm3 (12x11x12)mm3 على التوالي , اما في حالة التطعيم بكبريتات الحديدوز المائية كانت ابعاد اكبر بلورة بعد اعادة التبلور هي في النسبة 3%, اذ اظهرت الدراسة اهمية اعادة نماء البلورات لمرة اولى وثانية ومدى تحسن الخصائص البلورية الناتجة عن هذه العملية من حيث النقاوة والحجم والهيئة , فنلاحظ ان المادة في الحالة النقية تكون اكبر حجما بالابعاد , وتم التاكد من التركيب البلوري للبلورة النقية , وللبلورات المطعمة اعتمادا على مخططات حيود الشعاع السيني وتحليل بنية البلورات بوساطة مقياس حيود الاشعة السينية للمسحوق واستخدام تصفية ريتفيلد لحساب معلمات خلية الوحدة unit cell وثوابت الشبيكة للبلورات المنماة. تمتلك بلورة K2SO4 النقية قبل التطعيم النظام البلوري المعيني المتعامد المحاور (Orthorhombic) وثوابت خلية الوحدة المطابقة تقريبا لبطاقة JCPDSوالدراسات السابقة , اما للبلورات المطعمة تشير مخططات XRDالى تعرضها لبعض التغيرات في البناء البلوري وتحول النظام من المعيني المتعامد المحاور الى احادي الميل (Monoclinic) في حالة التطعيم بالنحاس بنسبتي 2% ,3% , ودراسة الانماط الاهتزازية للبلورات المنماة بتقنية FTIR اذ نلاحظ حدوث امتصاص للحزمة العريضة عند القيمة 1097 cm - 1 للبلورة النقية K2SO4 والمطعمة بتزحزح قليل يتراوح بين 3 ± عن قيمة العدد الموجي في الحالة النقية وهو ما يميز انماط الاهتزاز للمجموعة الكبريتية , واخيرا درست الانتقالات الطورية من اختبار مسعرية المسح التفاضلي DSC اذ لوحظ تغير الطور لبلورة K2SO4 في درجة الحرارة 581˚C اما العينات المطعمة فنلاحظ حدوث تزحزح بمقدار ±2 عن العينة النقية , وحساب السعة الحرارية لهذه البلورات من مخططات اختبار DSC . | Single Crystal of Pure and Cu+2 , Fe+2 doped potassium sulfate a rising from potassium sulfate as a material basis and additions specific of copper sulfate CuSO4.5H2O and ferrous sulfate FeSO4.7H2O proportions by weight (1% ,2% ,3% ,5% ) were grown from aqueous solutions by the slow evaporation technique at room temperature, for easy being and give acceptable quality results with Normality M=1 , with dimension of (11x9x4) mm3(9x3x2) mm3 and dimensions (28x18x4) mm3 after re - crystallization to crystallize pure K2SO4 , and study The influence of doping on crystal growth and synthetic properties crystalline, after doping ,in the case of doping of copper sulfate it was the biggest dimensions of crystal doped by 3% 2% after re - crystallization was (14x12x9)mm3 (12x11x12)mm3, respectively , also in the case of dopants ferrous sulfate was larger dimensions crystal after re - crystallization at in the ratio of 3% , as the study showed the importance of re - crystallization of crystals - time first and second and the extent of improvement in characteristics of crystalline resulting from this process in terms of purity, size and body , We note that the Crystal in the pure case be larger dimensions, Structure analysis of the grown crystals were obtained and confirmed by X - Ray powder diffraction measurements. The diffraction patterns were analyzed by the Rietveld refinement method to calculate the unit cell parameters of these crystals , XRD measurements show the crystal system of orthorhombic, Space group (Pnma) and constants of the unit cell, the agreement to the card JCPDS and previous studies, XRD schemes indicate to occur some of the changes in the construction of crystal Structure for dopant crystal and transformation from Orthorhombic to Monoclinic system at the case of dopante copper 2%, 3%, and study the vibrational patterns for the grown crystals by technology FTIR , where we note the occur uptake of broadband at the value of number wave 1097 cm - 1 for pure Crystal K2SO4 , and dopants Crystals occur few Shift about 3 ± from the value of the wave number from the pure case. It was that distinguishes the vibration patterns of the group sulfur, finally studied phase transitions by test Calorimetry differential scanning DSC , a change phase was observed to crystal K2SO4 at temperature 581˚C and dopants Crystals we note the occur Shift about ± 2 for the pure sample , calculate the heat capacity for these Crystal from DSC analysis schemes.

محاكاة الحل التحليلي لقدرة خرج ليزر ليف زجاج السليكا المطعم باليتاربيوم

اسم المؤلف: كنار نبيل جليل
اسم المشرف: مظهر شهاب احمد
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The current study included treating a theory of general derivation equation coefficients output laser's power ( ) by using the analytical solution of the rate equations that included the transition factor ( ), in which the losses scattering be neglected for a laser system when the active material is an optical fiber, its core is silica glass and Yb3+ - doped.While its resonant cavity it resonator Fabry - Perot, and it is pumping through one end of the optical fiber, while the Continuous Wave (CW) laser emission from the other end.In this study, it has been selected pumping wavelength ( 920*10 - 9m) and lasing wavelength ( 1090*10 - 9m) for this middle effective as an example of a typical plan to pump quasi four levels to find a numerical solution of the equation of the output laser which have been derived by programmable coefficients of this equation matlab language (version 8.1) this happened, after the coefficient ( ) has been calculated for all these laser transitions of this middle effective when it has been pumped ( ) as mention above.The simulation results for this laser system have presented that since the optical fiber is Single Clad Fiber (SCF) and a design of (Lycom ) type, it has been found that the concentration of the type (CorActive) is the highest value for obtaining high efficiency.The laser output power ( ) has been drops linearly by the increasing of core optical fiber radius, while it increases linearly with the increasing of the length of optical fiber, the laser output mirror reflectivity, pumping power, it is the highest values when using the optical fiber Single Mode (SM).In case of the optical fiber is Double Clad Fiber (DCF) and the design of type Large Mode Area (LMA), the ( ) decreases with increasing radius of the core of the optical fiber, while increases with each of the length of optical fiber and pumping power.In addition to that it has been found that ( ) increases linearly with the increasing pumping power whether the inner clad fiber shape is a Rectangle or Square or Circular, and that, the value of laser output power and efficiency are higher in the case of a Rectangular shape.

تحضير SnO2 النانوي ودراسة تاثير التشويب على الخواص التركيبية والبصرية == Preparation SnO2 nanoparticles and Study the Effect of Doping on Structure and Optical Properties

اسم المؤلف: كرار امين قدوري محمد
اسم المشرف: طارق عبد الرضا علوان الظاهر
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا البحث تحضير مسحوق SnO2 النانوي النقي المحضر من املاح القصدير المتمثلة بملح SnCl4.5H2O بطريقة الصول - جل بثلاثة مذيبات مختلفة وهي الماء، والميثانول، والايثانول، وتم اجراء عملية التلدين عند درجة حرارة (400°C) .تم اختيار المذيب الايثانول لاعطائه اكبر كمية من المسحوق ومطابقته للملف ذي الرقم (JCPDS : 41 - 1445) لتحضير العينات المشوبة (بالنيكل والمغنيسيوم والكادميوم) كل على انفراد وبثلاثة تراكيز (5, 10 و%15) من كل عنصر ثم اجريت عملية تلدين لهذه العينات لدرجة (700°C).اظــهرت نتائج حـيود الشعاع السيني ان جــميـع العينات المحـضـرة تمتلك نظاما رباعيا متعددة التبلور وفحصت العينات للمدى الزاوي (°20 - °100)، وظهرت السطوح الاربعة الاعلى شدة وهي ((110, (101), (200), 211))، تم حساب الحجم الحبيبي بطريقة ديباي - شيرر وبطريقة وليامسون - هول، وبينت النتائج ان حجم الحبيبات يقل بزيادة نسبة التشويب، كما تم حساب العديد من المعلمات التركيبية كثوابت الشبيكة وفسحة السطوح، والكثافة، والمساحة السطحية النوعية، وعدد خلايا الوحدة، وكثافة الانخلاعات، والاجهادات المجهرية وعامل التشكيل وعامل طبيعة السطح. اوضحت نتائج فحوص (AFM) طبيعة السطح للعينات المحضرة، وقد تم حساب معدل الحجم الحبيبي، ومعدل الخشونة، وقيمة جذر مربع المعدل(RMS) وكانت مختلفة من حيث معدل خشونة السطح. حيث تقل الخشونة بزيادة نسبة التشويب، ويقل معدل قطر الحبيبات بزيادة نسبة التشويب التي اتفقت مع نتائج حيود الشعاع السيني وكانت تتراوح ما بين (127.71 - 69.64) nm، وقد اظهرت صور (SEM) ان اشكال الحبيبات النانوية للنماذج (P4,N3,M3,C3) كروية او شبه كروية متجمعة بهياة عناقيد وظهر البعض منها بشكل متكتل. اما بالنسبة لفحص (EDX) فقد اظهرت جميع العينات قمة عالية عند ~3.5) keV) للقصدير مع ظهور قمم صغيرة لعنصر الكلور والبوتاسيوم التي عدت كشوائب بنسب وزنية ضئيلة جدا نتيجة عملية التحضير للعينة النقية، اما العينات المشوبة فقد اظهرت قمم مادة التشويب بالاضافة الى القصدير الا ان الاوكسجين لم يظهر في فحص (EDX).ومن خلال تسجيل طيـف الامتصاص لمحلول SnO2 وضـمن مــدى الاطــوال الموجـية (300 - 900 nm)، اوضحت النتائج ان الامتصاصية تزداد بزيادة نسبة التشويب لجميع العينات، اما فـجـوة الـطاقة البصرية للانتقال الالكتروني المباشر الـمـسـمـوح باستعمال معادلة (Tauc) وباستخدام معادلة (Kubelka - Munk) فقد وجد انها تقل بزيادة نسبة التشويب. | In this research, pure SnO2 Nanopowders were prepared from tin salt (SnCl4.5H2O) by sol - gel method using three different solvents; water, methanol and ethanol. The preparered powders annealed at temperature (400°C). according to the result of prepared powder, the sample of ethanol as a solvent is taken into consideration due to the greater amount of the powder is produced and it’s in a good agreement with the File No. (JCPDS : 41 - 1445). The preparation of doped samples is performed using ethanol as a solvent with each one of the dopants (Nickel, Magnesium and Cadmium) with three percentages (5, 10 and 15)% of each element. Then nine prepared doped samples as well as the pure one were annealing at (700°C).XRD results show, all prepared samples have polycrystalline tetragonal crystal system. The scan of x - ray in the range of Bragg’s angle (20 - 100)° which revealed the four highest intensity peaks, (110),( 101),( 200) and ( 211)planes. From the diffraction pattern of each sample, the crystallite size is calculated by Debye - Sherrer and Williamson - Hall methods. Their results showed that grain size decreases with increasing ratio of doping concentration, also there has been many parameter likes; lattice constants, interplanar distance, specific surface area, number of unit cells, intensity, dislocations density and macrostrain which are calculated. AFM test revealed the morphology of the prepared samples. Their grain size, roughness and average root mean square value (RMS) are different for each sample. Surface roughness decreased with the increase of the dopant percentage. The average grain size was ranging between (69.64 - 127.71) nm and is decreased with the increase of dopant percentage and this show a good agreement with the XRD results. SEM for the sample (P4, N3, M3 and C3) revealed spherical or semi - spherical nanoparticles agglomerate in the form of a cluster. While EDX test shows a high peak at (~ 3.5)KeV of the Tin, with small peaks of chlorine and potassium which are considered as impurity and that is due to its small quantity which is resulted from the process of preparation of pure sample. In the doped samples, the peaks of dopant elements appeared in addition to that of tin, but the oxygen does not appear.UV spectra for all samples are performed by dissolving some amount of the powder in the double distilled water in the range (300 - 900) nm, their results show the absorbance increases with the proportion of dopant concentration of all samples. The optical energy gap for allowed direct transition are calculated by using Tauc and Kubelka - Munk equations, which decrease with the increase of dopant percentage.

دراسة الخصائص التركيبية والكهربائية لمركبات الباريوم تيتانيت المطعمة بالكالسيوم والسترونتيوم النانوية المحضرة بطريقة السول - جل ذات الاحتراق التلقائي == Studying Structural, and Electrical Properties for Nano Barium Titanate doped with (Ca,Sr) prepared by Sol - Gel Auto Combustion Method

اسم المؤلف: فراس محمد طعمة عباس الجبوري
اسم المشرف: فاروق ابراهيم حسين قادر
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: حضرت مركبات الباريوم تيتانيت النانوية (Ba1 - xSrxTiO3) لقيم (x=0,0.26,0.28,0.30,0.32,0.34) Ba1 - xCaxTiO3،للقيم (x=0.2,0.4,0.6,0.8)باستعمال طريقتين مختلفتين, الطريقة الاولى جديدة تستعمل لاول مرة وهي طريقة السول - جل ذات الاحتراق التلقائي، والثانية طريقة السول - جل ،ثم اجريت عليها الفحوصات والدراسات التركيبية والكهربائية. اظهرت نتائج الخواص التركيبية تشكيل الطور الرباعي ووجوده في جميع العينات المحضرة بالطريقتين، على الرغم من استبدال ايون (Ba+2),بالايون (Sr+2), والايون (Ca+2),في كلا المركبين, كذلك بينت نتائج عملية الفهرسة البرمجية باستعمال برنامج (FULL PROF)، جودة عملية التصفية(GOF),اذ كانت قيمها اكبر من الرقم(1)،لجميع العينات كما تبين نقصان كل من معلمات الشبيكة وحجم خلية الوحدة والكثافة النظرية والحجم الحبيبي للعينات بزيادة تركيز الايون (Sr+2)،والايون(Ca+2)، في كلا المركبين المحضرين مع بقاء نسبة الرباعية (c⁄a) بقيت اكبر من الرقم(1) في كل العينات. وعند دراسة خواص العزل الكهربائي سببت زيادة تركيز ايون (Sr+2)، وايون (Ca+)،زيادة ثابت العزل الكهربائي ونقصان كل من معامل الفقد العزلي والتوصيلية الكهربائية المتناوبة بثبوت العوامل الاخرى مثل درجة الحرارة والتردد وسمك العينات وتغيرها الواضح مع التردد(50Hz - 1MHz) كذلك سببت زيادة تركيز ايون (Sr+2)، وايون (Ca+)،نقصان التوصيلية الكهربائية المستمرة وزيادة متانة العزل الكهربائي للعينات المحروقة بدرجة (1100ᴼC) لمدة (4h) والمحضرة بطريقة السول - جل ذات الاحتراق التلقائي.بينت نتائج الفحوصات الكهربائية وفحص متانة العزل الكهربائي ان النسبة (X=0.30)، ذي الصيغة الكيميائية (Ba1 - xSrxTiO3)،والنسبة (X=0.6)، ذي الصيغة الكيميائية(Ba1 - xCaxTiO3)، تمتلكان اكبر ثابت عزل كهربائي واكبر متانة عزل كهربائي ،واقل معامل فقد عزلي ،واقل توصيلية كهربائية متناوبة ومستمرة ،عليه فانهما افضل نسبتين تم تحضريهما لاول مرة | In this research, Nano Barium titanate ,(Ba1 - xSrxTiO3) of values ,(x=0,0.26,0.28,0.30,0.32,0.34),and (Ba1 - xCaxTiO3)values(x=0.2,0.4,0.6,0.8) were synthesized using two different methods ,the first was a new method used for the first time, in synthesized aforementioned titanate compounds, which sol - gel auto - combustion method, and the second was sol - gel method , then the structural and electrical properties were studied. The Structural results showed presence and forming the Tetragonal Phase in all samples,though,the Substitution(Ba+2) ion with (Sr+2)and(Ca+2)ions, the results of the software indexing by (FULL PROF),program showed goodness of fitting(GOF) greater than(1),also the results showed that lattice parameters, Volume, theoretical Density and grain size decreased when the concentration of(Sr+2)and(Ca+2)ions increased in both compounds and the Tetragonality ratio (c/a) remained greater than the number (1) in all samples. When examining the dielectric properties increasing of (Sr+2) and(Ca+2) ions concentration caused increased in Dielectric Constant and decreased Dielectric loss factor, alternating electrical conductivity certified the other factors such as temperature, frequency and the thickness of the samples and change clearly with frequency (50 Hz - 1MHz),also increasing of (Sr+2) and(Ca+2) ions concentration caused decreased in direct electric conductivity and increased Dielectric Strength for the samples that fired at (1100ᴼC) for (4h) and prepared by Sol - gel auto - combustion method . The results of electrical tests and examination of the Dielectric Strength showed that ratio (X =0.30), with the chemical formula (Ba1 - xSrxTiO3), and the ratio (X= 0.6), a chemical formula (Ba1 - xCaxTiO3), possess the largest Dielectric Constant and greater Dielectric Strength, and lower Dielectric loss factor, and less alternating electrical conductivity and direct electric conductivity, so they were the best two ratios, prepared for the first time by sol - gel auto - combustion method that can be used in many applications

دراسة الخصائص التركيبية والكهربائية والمغناطيسية للفرايت النانوي ذي التركيب المغزلي المحضر بطريقة السول (NixCu0.2Zn0.8 - xFe2O4) - جل ذات الا حتراق التلقائي == Studying Structural , Electrical and Magnetic Properties for Nano Spinel Ferrite of (NixCu0.2Zn0.8 - xFe2O4) Prepared by Sol - Gel Auto Combustion Method

اسم المؤلف: عمار عيسى عباس نجم الربيعي
اسم المشرف: احمد رفيق عبد المجيد
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: In this research , Nano spinel ferrite (NixCu0.2Zn0.8 - xFe2O4) was synthesized using sol - gel auto - combustion and flash combustion methods .Nineteen samples were prepared and their studies were divided into three parts. Study the effect of citric acid in preparation of Nano ferrite (Ni0.1Cu0.2Zn0.7Fe2O4) by changing the molar ratio of adding fuel to any sample and the five samples were prepared from (C series). The structural properties of samples were studied using x - ray diffraction technique (XRD) and scanning electron microscope (SEM) which showed that the obtained ferrite possesses spinel cubic phase for all used molar ratios , besides when the concentration of adding fuel was increased leads to decrease in grain size and theoretical density , increase in dislocation density and the surface area. Then the molar ratio (1 : 1 M) was chosen as the best adding ratio due to that the obtained ferrite at this ratio possesses best texture coefficient with small grain size and best internal strain by comparing with the other ratios.  Study the influence of substitute (Zn+2) ion by (Ni+2) ion on the structural , electrical and magnetic properties of Nano ferrite powder (NixCu0.2Zn0.8 - xFe2O4)(0.1≤X≤0.7) synthesized using sol - gel auto - combustion method , there are seven samples were prepared (A) series and tested by two types of structural test included analyzer x - ray diffraction and scanning electron microscope, the results exhibited forming the spinel phase for all samples in spite of the substitute of (Zn+2) ion by (Ni+2) ion, and the increase of (Zn+2) ions concentration leads to decrease in the grain size and increase in theoretical density. Then the ferrite powder was divided in two groups, the first was pressed into the pellet shape which was used in electrical tests and the second group was pressed into the rings shape which was used in magnetic tests. The two faces of the pellets in first group polished by silver paste material in case to obtain a ceramic capacitors that subjected to electrical tests which included the measurement of dielectric constant , dielectric loss coefficient, alternating electrical conductivity and direct electrical conductivity ,and the study of magnetic properties for the rings samples included measurement of hysteresis loop , selfinduction, initial permeability and the relative loss factor. The results of electrical tests exhibited decrease in dielectric constant with frequency increase at room temperature , and dielectric constant increases at certain ratios of adding (Zn+2) ions and decreases at other ratios. However , the dielectric loss coefficient its fall when increasing frequency until reaches its lowest value at the high frequencies values and so it is various when the concentrations of (Zn+2) ion were changed .and the measurement of alternating electrical conductivity displaying it increases with the increasein frequency and it values disparity with the change of (Zn+2)ion concentration , in other hand the direct electrical conductivity increase with substituting (Zn+2) ion concentration increases. The magnetic tests results exhibited that the ratio (X=0.3) with chemical formula (Ni0.3Cu0.2Zn0.5Fe2O4) possesses a significant magnetic properties when compared with other samples because it has the highest initial permeability with lowest relative loss factor and it has best hysteresis loop so that it realized conditions for using it as a cores in transducers and electrical motors. Study the influence of substituting (Zn+2)ion by (Ni+2) ion on the structural properties of Nano ferrite (NixCu0.2Zn0.8 - xFe2O4)(0.1≤ X≤ 0.7) synthesized using flash combustion method, there are seven samples were prepared (F) series tested by two types of structural tests included xray diffraction and scanning electron microscope tests , and the results exhibited form the spinel phase for all samples and no other phases were presented and observed that structural results were agreed with these obtained from sol - gel auto - combustion method.

تاثير جسيمات الفضة النانوية على الخواص البصرية لزجاج التليريوم المشوب بايونات العنصر الارضي النادر السماريوم == effect of silver nanoparticles on the optical properties of glass Tellurium doping ions rare earth element Samarium

اسم المؤلف: عماد محمد احمد عبد الله المرسومي
اسم المشرف: طارق عبد الرضا علوان الظاهر
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The preparation of co - doping Tellurium glass of TeO2−B2O3−PbO by silver nanoparticles and Samarium were performed according 80TeO2−(7.5−x)B2O3−12PbO−0.5Sm+3−(x)Ag. where (x=0,0.05,0.1,0.15,0.2,0.25 mol%) by melting quench technique and annealed at 300°C for 3h as a first stage of this study.The prepared samples of glass ceramic with dimensions 1mmx1cmx2cm were characterized by XRD, SEM and TEM for their structural identification. UV - spectrophotometer in the wavelength (200 - 1100 nm ) Shimadzu and K - Mac SA miniature UV - VIS spectrometer - spectra were used for their absorption and fluorescence spectra.Patterns of XRD revealed amorphous structure for all sample. The element compositions were identified by TEM and EDX attached to SEM. Their densities 5.37 - 5.49 g/cm3 were measured by Archimedes experiment, and the corresponding molar volume were calculated in the range 29.7 - 29.1 cm−3.Their variation occur due to the molarity increase of doping.The absorption spectra revealed seven peaks which represented the transition from the ground state 6H5/2 to different excited states. The band gap for direct transition for all samples about 2.3 eV, while for indirect transition around 1.91eV.The highly doped sample named A5 is selected for fluorescence spectroscopy .It spectra showed five emission bands at 430(4G9/2➙4H5/2), 435(4G9/2➙4H7/2), 450(4G9/2➙4H7/2) , 600 (4I13/2➙4H9/ٕ)and 645(4 G 5/ٕ➙6H15/2) transitions. Then according to the resulted fluorescence spectra of it, two additional samples B1 and B2 were prepared with the same molar percentage as A5,but annealed at the same temperature for 6h and 9h. And two more sampleswere prepared by increases their molarity to 1% and 1.5% for both samarium and silver, symbolized by C1 and C2 respectively. The intensities of their fluorescence spectra increases many times for the same emission bands as it is compared with the same emission bands of A5.

تصنيع ودراسة خصائص كاشف المفرق الهجين CdO/Porous Silicon

اسم المؤلف: عبد الله محمود علي الجبوري
اسم المشرف: نادر فاضل حبوبي | رائد عبد الوهاب اسماعيل
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا البحث، تم ترسيب اغشيةCdO على السليكون المسامي وعلى شرائح زجاجية بطريقة الاكسدة الحرارية السريعة(Rapid Thermal Oxidation) وذلك لدراسة الخصائص التركيبية والكهربائية والبصرية لهذه الاغشية. تم تصنيع كاشف المفرق الهجين نوع CdO/Porous Silicon من خلال الاكسدة الحرارية السريعة لمادة الكادميوم المرسبة على السليكون المسامي ,تم دراسة الخصائص الكهربائية والتركيبية والفولطائية الضوئية لهذه الكواشف من خللال قياسات تيار - جهد وسعة - جهد. تم استخدام التنميش الكهروكيمياوي للسليكون حيث تمت السيطرة على المسامية بتغيير كثافة تيار التنميش وزمن التنميش. لقد اوضحت النتائج ان معلمات الكاشف تعتمد بشكل كبيركثافة تيار التنميش وزمن التنميش. ان اقل قيمة لعامل المثالية التي تم الحصول عليه كانت 1.28 وذلك للكواشف المصنعة بكثافة تيار40 ملي امبير/سم2 وزمن تنميش 600 ثانية .لقد اوضحت نتائج الكفاءة الكمية اي الكواشف المصنعة تمتلك قمتين الاولى تمتص عند المنطقة المحصورة بين اوكسبد الكادميوم والسليكون المسامي اما المنطقة الثانية ناتجة بسبب الامتصاص عندالسليكون البلوري والسليكون المسامي. قيمة الكفاءة الكمية عند المنطقة الاولى كانت بحدود 77% عند الطول الموجي 550 نانومتر بينما الثانية كانت بحدود 88% عند الطول الموجي 700نانومتر. اعلى قيمة للكشفية النوعية كانت بحدود 87 عند الطول الموجي 550 نانومتر للكواشف المصنعة بكثافة تيار 30 ملي امبير/سم2 وزمن تنميش 2400 ثانية. كل الكواشف المصنعة تعمل للمدى الطيفي ( 400 - 900 ) نانومتر. اعلى قيمة لتياردائرة القصر كانت 19 مايكروامبير واعلى قيمة لفولتية الدائرة المفتوحة 420 ملي فولت للكواشف المصنعة. | In this work, CdO thin films are deposited on porous silicon and clean glass substrates by rapid thermal oxidation (RTO) to study structural, electrical and optical properties of these films. CdO/porous Si heterojunction photodetectors have been fabricated by rapid thermal oxidation (RTO) of Cd on porous and are presented. Structural, electrical, and photovoltaic properties of CdO/P - Si heterojunctions prepared by (RTO) on single - crystal p - type and monocrystalline silicon (111) substrates are examined with J - V the C - V methods. The electrochemical etching process was adopted as a technique to control the porosity of silicon wafer by controlling the time of etching in the range (600 - 2400s), and by controlling the etching current density. The results revealed that all our detectors’ parameters are highly dependant on etching time and etching current density. The minimum value of ideality factor is 1.28 for the detectors prepared with etching current density of 40mA/cm2 for 600s. The results of quantum efficiency show that these detectors have two depletion regions, the first one between CdO film and porous silicon layer, the second between the latter and the crystalline silicon. The first peak of quantum efficiency curve is 77% at a wavelength of 550nm while the second one is 88% at 700nm. The maximum specific detectivity was of wavelength 550nm for the detectors fabricated with etching current density of 40mA/cm2 and etching time of 2400s. All detectors are working on the spectrum region 400 - 900nm. The maximum Isc and Voc are 19A, 420mV respectively for the detectors fabricated with etching current density 30mA/cm2 and etching time 1200s

تصنيع دروع واقية من الاشعاع ودراسة بعض خواصها == Manufacture radiation protection shields and study some of its properties

اسم المؤلف: عبد الرحيم ضياء ابراهيم
اسم المشرف: احمد فاضل مخيبر
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذه الدراسة تصنيع دروع واقية من مواد متراكبة مكونة من الايبوكسي كمادة اساس ومواد تدعيم مختلفة (C, Ni, PbO, Bi) وبنسب تدعيم متباينة % (10, 20, 30, 40, 50) وبابعاد cm (1 X 10 X 10) للوقاية من الاشعاع , ولغرض التعرف على مدى ملائمة هذه الدروع للاستعمال في مجال الوقاية من اشعة كاما, قيست بعض معلمات التدريع مثل معامل التوهين الخطي (μ), والعدد الذري المؤثر (Zeffe), وسمك النصف (X_(1/2)), ومعدل المسار الحر (λ_mean), والثقالة للطاقات KeV (121.8, 344.3, 662, 1773 ,1332, 1408) , بالاضافة الى عامل التراكم عند الطاقة 662 KeV , ولهذا الغرض تم استعمال منظومة كاشف ايوديد الصوديوم NaI (TI) مع مصادر مختلفة Eu - 152, Co - 60, Cs - 137. اظهرت النتائج ان هذه المعلمات تتاثر بتغير نسب التدعيم وطاقة اشعة كاما , حيث تبين ان زيادة نسبة التدعيم للدروع ادى الى زيادة كل من معامل التوهين الخطي والعدد الذري المؤثر. وفي المقابل يحدث نقصان قيم كل منهما خلال زيادة طاقة اشعة كاما للمصدر المستعمل . وبخاصة عند التراكيز العالية % (40, 50), والطاقات الواطئة< 0.662 MeV E_γ حيث سجلت قيم معامل التوهين الخطي cm - 1 (2.1726, 3.6161) للدروع المدعمة بالبزموث بنسبة تدعيم %40 و50% على التوالي ولطاقة 121.8 KeV, ولطاقة 344.3 KeV ولنفس التركيزين ايضا cm - 1 (0.36521, 0.4005) على التوالي, اما عامل التراكم فقد وجد انه يقل بزيادة التركيز عند طاقة معينة. اما بالنسبة لسمك النصف ومعدل المسار الحر فقد وجد ان سمك النصف يقل بزيادة التراكيز وبخاصة عند التراكيز العالية وكذلك الحال بالنسبة لمعدل المسار الحر. كذلك تم قياس قيم الثقالة للدروع كافة بالنسبة لعنصر الرصاص, حيث وجد من خلال قيم الثقالة ان هذه الدروع اخف وزنا من مادة الرصاص, مما يجعلها مفضلة على المواد التقليدية مثل الرصاص والكونكريت. واما بالنسبة لكفاءة الكاشف فقد وجد انها تعتمد في قيمها على مادة الدرع ونوعه وكذلك على قيمة الطاقة المستخدمة. وبينت الدراسة ان هناك توافقا جيدا بين القيم العملية والنظرية. | In this study, protection shields has been preparated , consist of composite materials have epoxy as a basis material and different reinforcing materials (C, Ni, PbO, Bi), with different reinforcing ratios (10, 20, 30. 40, 50) %, and dimensions (1 X 10 X 10) cm to protect from radiation, for examination the suitability of using this shields to protect from gamma ray, some shielding parameters was calculated like Linear attenuation coefficient (μ), Effective atomic number (Zeffe), Half layer thickness (X_(1/2)), Mean free path (λ_mean), and Heaviness for energies (121.8, 344.3, 662, 1773 ,1332, 1408) KeV , in addition to build up factor at 662 KeV, for this purpose sodium iodide system NaI(TI) was used with deferent radiation sources Eu - 152, Co - 60, Cs - 137.The results show that this parameter effected by the reinforcing ratio and gamma ray energy, it was found the linear attenuation coefficient and atomic effective number increases with reinforcing ratio increases, and decreased with energy increasing. Specially with high concentrations (40, 50) % and at low energies E_γ < 0.662 MeV, Since the values of linear attenuation coefficient for shields which reinforcing by bismuth with concentrations (40%,50) was (2.1726, 3.661) respectively for 121.8 KeV, and for energy 344.3 KeV for same concentrations is (0.36521, 0.4005) respectively. The build up factor was found decreased with reinforcing ratio increases, with certain energy.As for the Half layer thickness and mean free path, it was found that the Half layer thickness decreased with energy increasing specially at high concentrations, as well as the Mean free path.Heaviness was calculated too for all shields with respect to lead, from its values, we found that this shields lighter than lead, which make it preferable to traditional material such as lead and concrete.As for the detector efficiency, it was found to be dependent on the type of shield material and the value of used energy which used. This study showed that there is good agreement between the experimental and theoretical values of total attenuation coefficients

الخواص الكهربائية والتركيب الدقيق لمقاوم اوكسيد الخارصين السيراميكي المتغير المطعم بالاتربة النادرة == Electrical Properties & Microstructure Of ZnO - Based Varistor Ceramics Doped With Rare Earth

اسم المؤلف: عادل اسماعيل كاظم
اسم المشرف: ايسر جمعة ابراهيم | عبد الحميد رحيم مهدي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يعد اوكسيد الخارصين (ZnO) السيراميكي مادة شبه موصلة نوع - n، ويلعب دورا هاما في مدى واسع من العمليات الصناعية والمنتجات التجارية.ان من اكثر الاستعمالات اهمية استعماله لحماية الدوائر الكهربائية والمعدات الالكترونية من الجهد الزائد المدمر نتيجة البرق او الناتج من الارتفاع الكبير والمفاجيء في قيم الجهد الكهربائي, وتسمى المقاوم المتغير المعدني (Metal Oxide Varistor MOV) . يعد المقاوم المتغير نبيطة ذات سلوك غير اومي وخواصه الكهربائية تشبه تقريبا في عملها ثنائي زينر. لغرض دراسة وتوصيف مركبات مقوم اوكسيد الخارصين السيراميكي المتغير وتحسين خواصه الكهربائية, تم تحضير مركباته باضافة بعض الاكاسيد المعدنية وهي Bi2O3، Sb2O3، Co3O4، Cr2O3، وMnO2, حيث تم اختبار تاثيرها لوحدها اولا, وثانيا تم اضافة اكاسيد الاتربة النادرة (M2O3) مع الاكاسيد المذكورة اعلاه واختبار تاثيرها على المقاوم المتغير, حيث ان (M=Dy, La,Y) وبتراكيز مولية ( *10 - 3(1,5,10)).تمت عمليات التحضير والسيطرة على التركيب الدقيق عن طريق التحكم بظروف عمليات الحرق بدءا من عملية الاعداد بخلط اوكسيد الزنك مع الاكاسيد المضافة ومن ثم الحرق في درجة حرارة 600℃ وبمعدل 5 ℃⁄min في الفرن ولمدة ساعتين للعينات جميعها وذلك لازالة الغازات والرطوبة من المساحيق. بعد عملية الحرق تم كبس المساحيق بشكل اقراص بقطر 15mm وسمك 2mm تقريبا تحت ضغط يساوي 25MP.بعد عملية الكبس اجريت عملية التلبيد (تفاعلات الاطوار الصلبة والاطوار السائلة) بدرجات حرارة مختلفة ( 1050, 1100, 1150 ℃ ) وزمن ثابت للعينات جميعها مقداره ساعتين للحصول على الاشكال النهائية والوصول الى الخصائص المطلوبة.تمت دراسة بعض الخواص الفيزيائية للعينات المحضرة وهي الكثافة والمسامية والخواص التركيبية وذلك لغرض تقييم تاثير الاكاسيد المضافة وظروف التحضير على سلوك التطبيق الصناعي للعينات.وقد تبين ان مقدار الكثافة النسبية والمسامية تتاثر بدرجة حرارة التلبيد وبنسب تراكيز اكاسيد الاتربة النادرة المضافة ونوعها,فقد ازداد مقدار الكثافة بازدياد درجة حرارة التلبيد ونسبة او تركيز اكاسيد الاتربة النادرة المضافة ونتيجة لذلك فقد نقص مقدار المسامية.لقد اعطى اختبار التركيب المجهري للمادة المحضرة رؤية واضحة عن الانتشار والنمو الحبيبي , وان نتائج اختبار الاشعة السينية (XRD) اوضحت ان التركيب البلوري لها معيني قائم كما ان قيم (a, b, c) وحجم خلية الوحد قد ازداد بزيادة درجة حرارة التلبيد ونسب تراكيز الاكاسيد المضافة ونوعها.اظهرت الحبيبات النانوية والميكروية ضمن البحث الحالي تاثيرا كبيرا على الخصائص الكهربائية المدروسة والتي صممت لها اداة في المختبر لقياس معامل السلوك اللاخطي, مقدار جهد الانهيار , تيار التسرب, قابلية امتصاص الطاقة , انحدار الجهد وجهد الحدود الحبيبية.حيث تبين ان معامل السلوك اللاخطي يزداد بازدياد تركيز الاكاسيد المضافة وارتفاع درجة حرارة التلبيد ومن ثم يبدا بالنقصان بعد درجة (1100℃) بسبب تطاير وتبخر اوكسيد البزموث وطور(. (Zn7Sb2O12 بينما نقص مقدار جهد الانهيار وقابلية امتصاص الطاقة وانحدار الجهد بازدياد درجة حرارة التلبيد,اما تيار التسرب فقد ازداد مقداره بازدياد درجة حرارة التلبيد, وكذلك بالنسبة لجهد الحدود الحبيبية فقد ازدادت قيمها بازدياد درجة حرارة التلبيد. | ZnO is a ceramic material which tends to intrinsically form as an n - type semiconductor material, which plays an important role in a wide range of industrial processes and commercial products.One of most important usages is a Surge protection device which used to protect power and electronic equipment from the destructive transient overvoltage which arises from lightning or other large - magnitude surge, this device is called metal oxide varistor (MOV).Varistors are voltage dependent, non - ohmic devices whose electrical characteristics are almost similar to back - to - back Zener diodes.Improvement ZnO varistor performance accomplished by doping it by some metal oxides, Bi2O3, Sb2O3, Co3O4, Cr2O3, and MnO2, where they were testing their effect alone first, and second was added rare earth oxides (M2O3) with oxides mentioned above and test their effect on varistor, where (M = Dy, La, Y) and molar concentrations (10 - 3, 5*10 - 3, 10*10 - 3)The preparation process starts from mixing ZnO with additives, calcination at 600℃ in a furnace to remove the gases and the humidity from the powders. Then the calcined powders uniaxially pressed into discs (pellets) of 15 mm in diameter and 2 mm in thickness under a pressure equals to 25MP. After pressing the green pellets sintered under different temperatures (1050, 1100, 1150℃) and a fixed time to accomplish the final shapes and reach the desired properties of the samples.Then the densities of the samples were measured by using Archimedes Principle with mercury liquid to calculate the relative density and the porosity of each sample, and to study the effect of the sintering temperature and REO concentration, which already be obvious the effect of them. The microstructure test of the material prepared gave a clear vision for the diffusion and grain growth, although the results of XRD test showed that the crystal structure is an orthorhombic, and the values of (a, b, c) and the size of a the unit cell has been increased with increase the sintering temperature and ratios of the concentration of oxides added and kind.Micro and nano grains within the present research showed a significant effect on the studied electrical characteristics, which designed a tool in the laboratory for it and to measure the nonlinear coefficient, the amount breakdown voltage, leakage current, the potential gradient, the energy absorption capability, and the voltage per grain boundary. It was found that the nonlinear coefficient increases with the increasing of REO concentration added and increasing sintering temperature and then starts decreased after degree (1100℃ ) due to volatilization and evaporation of bismuth oxide and spinel phase (Zn7Sb2O12).The amount of breakdown voltage, potential gradient, energy absorption capability decreased with rising the sintering temperature, while the leakage current has been increased with increasing the sintering temperature, as well as the voltage per grain boundary has been increased with increasing of the sintering temperature.

دراسة الصفات الحرارية والميكانيكية وعمر الاداء PVC لبوليمر == Study of the Thermal, Mechanical Properties and Lifetime of PVC Polymer

اسم المؤلف: صهيب صباح احمد
اسم المشرف: وداد حمدي جاسم | محمد عبد النبي ثجيل
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: In this work, mechanical behavior of PVC product like pipes with different origins (K.S.A and Egypt) and Turkey doors with different manufacturing (Nova and Firat) which are used in Iraqi markets were studied.The objective of this work was to study the mechanical properties like ultimate tensile strength, Young's modulus, elongation at Max., elongation at break, impact strength, flexural strength and hardness of the pipes and doors.The experimental results show that K.S.A pipes exhibited maximum ultimate tensile strength and Young's modulus than that the Egypt pipes.However, the Egypt pipes exhibited maximum elongation at Max. and elongation at break when compared with K.S.A pipes.All the tensile properties of Firat doors are greater than that of Nova doors.Comparison of the flexural strength of pipes and doors. The pipes have the same flexural strength but the Firat doors have maximum value than Nova doors.Egypt pipes have a higher impact strength than K.S.A pipes. While the Firat doors have a higher impact strength than Nova doors. The experimental results of hardness Shore D indicated that K.S.A pipes exhibited maximum hardness number (83.7) than Egypt one, while the Firat and Nova doors have the same values.In this study, thermal properties of Firat and Nova have been evaluated, firstly by thermal conductivity and second by thermal stability and degradation. The Firat doors have better thermal conductivity than that of Nova doors. From the thermogravimetric analysis at different heating rates (2, 5, 10, 20 and 40 °C/min). The Firat doors have a higher thermal stability than Nova one.The Egypt pipes exhibited more thermal stability than the K.S.A pipes.From the TGA curves the activation energy of pipes and doors are determined at different conversion levels. At 30% conversion level when the mechanism of degradation would be stable and the value of activation energy of Egypt pipes and Firat doors is (108.35 KJ/mole) when it is (101.39 KJ/mole) for K.S.A pipes and (98.35 KJ/mole) for Nova doors. Thermogravimetric analysis (TGA) provides a method for accelerating the lifetime testing of polymers so that short - term experiments can be used to predict in use lifetime.The lifetime is decreased with increase of the temperature, at fixed temperature like 70 °C the lifetime of Egypt pipes is (≈100 years) while lifetime of K.S.A pipes is (≈21 years). At the same temperature (70 °C) the lifetime of Firat doors is (≈72 years) while the lifetime of Nova doors is (≈21 years).Thermomechanical analysis (TMA) test showed the glass transition temperature (Tg) and softening point (Ts) for pipes and doors. The K.S.A pipes have value for Tg and Ts higher than that of Egypt pipes, while the Firat and Nova doors have the same values.

دراسة بعض الخواص الفيزيائية للايبوكسي المدعم بدقائق نانوية == STUDY OF SOME PHYSICAL PROPERTIES OF EPOXY REINFORCE WITH NANO PARTICLES

اسم المؤلف: صفاء عبد صالح
اسم المشرف: وداد حمدي جاسم
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم استخدام مادة الايبوكسي (EP) مع نسب خلط حجمية مختلفة (1, 2, 3, 4, 5, 7, 10, 15 و20%) من الجسيمات الزركونيا ( 2(ZrO والمغنيسا ( MgO) النانوية ومن الجسيمات 2 ZrO وMgO المايكروية لتحضير متراكبات الايبوكسي النانوية ومتراكبات الايبوكسي المايكروية لفحص ودراسة بعض من خصائصها الميكانيكية (متانة الانحناءومعامل الانحناء ومتانة الكسر وقوة الصدمة والصلادة ) والخواص الكهربائية العزلية ( ثابت العزل الكهربائي وزاوية ظل الفقد والتوصيلية الكهربائية) والخواص الحرارية (التوصلية الحرارية ودرجة الانتقال الزجاجي)طريقة تحضير عينات الايبوكسي وعينات متراكبات الايبوكسي النانوية وعينات متراكبات الايبوكسي المايكروية تضمنت مراحل الخلط الميكانيكي ومجانس خلط الامواج فوق الصوتية واستخدام منظومة التفريغ. تم استخدام فحص الانحناء ذي النقاط الثلاث وفحص وقوة الصدمة وفحص الصلادة وفحص السعة الكهربائية العزلية وفحص الماسح التفاضلي السعوي الحراري وفحص مجهر المسح الالكتروني وفحص التوصيل الحراري لفحص عينات الايبوكسي ومتراكباتة النانوية والمايكروية وقد اظهرت النتائج التي تم الحصول عليها من فحص متانة الانحناء ذي النقاط الثلاث زيادة تدعيم الخصائص الميكانيكية لمتراكبات الايبوكسي الزركونيا النانوية ,ان نسبة 2% من الخلط تؤدي الى اعلى نسبة تدعيم لا متانة الانحناء بلغت 52% اما معامل الانحناء فتضاعف مرتين عند هذه النسبة وايضزاادة متانة الكسر لتصل الى 86% مقارنة مع نتائج عينة الايبوكسي واما قوة الصدمة فقد بلغت 51% وارتفعت صلادة المادة 5% نسبة التدعيم 2% . وقد ظهر الكسر اللدن بشكل واضح في بعض منحنيات الاجهاد - الانفعال في متراكبات الايبوكسي زركونيا.كما اظهرت الخصائص الميكانيكية لمتراكبات الايبوكسي مغنيسيا النانوية زيادة تدعيمها بزيادة نسب الخلط الحجمية لجسيمات المغنيسيا النانوي في التراكيز القليلة (< 5%) حيث اظهرت النسبة 4% من MgO اانانوية اعلى قيمة لقوة الانحناء حيث ازدادة بنسبة 47% مقارنة EP) ) في حين معامل الانحناء ارتفع بنسبة 74% مقارنة EP) ) في حين متانة الكسر لمتراكبات الايبوكسي مغنيسيا النانوية فتضاعفت بحدود اربع مرات عن الايبوكسي وقد بلغت قوة الصدمة 65% عند نسبة التدعيم وارتفعت صلادة المادة 3% مقارنة EP) ) لوحده. وقد ظهر الكسر اللدن بشكل واضح في منحنيات الاجهاد - الانفعال في متراكبات الايبوكسي مغنيسيا..الخصائص الميكانيكية لمتراكبات الايبوكسي زركونيا المايكروية ومتراكبات الايبوكسي مغنيسيا المايكروية اظهر انخفاض في خصائصها الميكانيكية بارتفاع نسب الخلط الحجمي للجسيمات المايكروية للزركونيا وللمغنيسيا ما عدا معامل الثني فقد زاد بارتفاع نسب الخلط الحجمي لجسيمات الزركونيا والمغنيسيا المايكروي.وهذا يظهر تفوق الجسيمات النانوية عن الاخرى المايكروية حيث اضافتها بنسب ضئيلة تؤدي الى تحسين ملحوظ في الصفات الميكانكية والتي يتم تفسيرها عن طريق الصور الماخوذة عن مجهر الماسح الالكتروني والتي اظهرت البنية التركيبة لسطح الكسر لمتراكبات الايبوكسي زركونيا النانوية ولمتراكبات الايبوكسي مغنيسيا النانوية بوجود شقوق نانوية عند نسب خلط حجمية معينة ,وقد بينت صور الكسر انتهاء اغلب الشقوق من التركيب بسب وجود الاضافات لجسيمات الزركونيا والمغنيسيا النانوية فكانت اقل ما يمكن في نسب2 % من نسب الخلط الحجمي لجسيمات الزركونيا النانوي وعند 4% من نسب خلط حجمي لجسيمات المغنيسيا النانوي. وهذا معزز من النتائج العملية التي حصلنا عليها عند هذه النسب الضئيلة الاضافة واثرها في تحسين الصفات الميكانيكية للايبوكسي.ان الخصائص الكهربائية العزلية لمتراكبات الايبوكسي زركونيا النانوية ولمتراكبات الايبوكسي مغنيسيا النانوية اظهرت زيادة تدعيم ثابت العزل الكهربائي عند نسب الخلط الحجمية الواطئة لجسيمات الزركونيا والمغنيسيا النانوية في حين في نسب الخلط العالية (> 10%) بداء ثابت العزل الكهربائي لمتراكب الايبوكسي مغنيسيا الناوني بالارتفاع عن اعلى نسبة تحسن في حين ثابت العزل الكهربائي لمتراكب الايبوكسي زركونيا بالانخفاض. في حين ان زاوية ظل الفقد لمتراكب الايبوكسي زركونيا النانوي تزداد زيادة طفيفة بزيادة نسب الخلط الحجمي لجسيمات الزركونيا النانوي في حين زاوية ظل الفقد لمتراكب الايبوكسي مغنيسيا النانوي تقل بنسب قليلة بزيادة نسب الخلط الحجمي لجسيمات المغنيسيا النانوي.التوصيل الحراري لمتراكبات الايبوكسي زركونيا النانوية ولمتراكبات الايبوكسي مغنيسيا النانوية لها نفس السلوك نسب خلط حجمية مختلفة (1, 2, 3, 4, 5, 7, 10, 15 و20%) ان التوصيل الحراري لكلا المتراكبتين (لمتراكب الايبوكسي زركونيا النانوي ولمتراكب الايبوكسي مغنيسيا النانوي) يزداد بزيادة نسب الخلط الحجمية لجسيمات زركونيا ومغنيسيا النانوية. تمتلك المتراكبات النانوية توصيل حراري اقل من المتراكبات المايكروية. اما المتراكبات النانوية فقد امتلك متركبت الزركونيا قيما اعلى للتوصيل الحراري مقارنة بمتراكبة المغنيسيا. | Epoxy with various mix ratio of concentration 1, 2, 3, 4, 5, 7, 10, 15 and 20% of ZrO2, MgO nanoparticles and ZrO2, MgO microparticles were used to prepare epoxy microcomposites and epoxy nanocomposites in order to study the several mechanical properties (flexural strength, flexural modulus , fracture toughness, impact strength and hardness) and electrical properties (dielectrical constant , dissipation factor and thermal conductivity) and thermal properties (thermal conductivity and Tg).The molding process was used to prepare epoxy and their nanocomposite and microcomposite samples using, ultrasonic homogenizer and shearing mixer. Three point bending examine, impact strength examine, hardness shore D examine, The LCR meter examine, Scanning Electron Microscope (SEM) examine and Differential Scanning Calorimeter (DSC) were used also.The results where obtained to form 3 - point bending examine illustrated that the mechanical properties of EP/ ZrO2 nanocomposites were increased with increasing concentration of ZrO2 nanoparticles. The ratio of about 2% vol. fraction lead to Maximum improvement in flexural strength was 52%. flexural modulus improvement was doubled at this ratio of vol. fraction, fracture toughness is improved about 86% at 2% vol. fraction, impact strength is improved about 51% at 2% vol. fraction , while hardness is improved about 5% at 2% vol. fraction comparing with results of epoxy sample. Ductile behavior appears in some stress - strain curves of obtained for EP/ ZrO2 nanocomposites. The mechanical properties of EP/ MgO nanocomposites were increased with increasing concentration of MgO nanoparticles at low volume fractions (˂ 5%) of MgO nanoparticles. Flexural strength improved 47% at 4% vol. fraction. Flexural modulus is improvement about 74% at 4% vol. fraction, fracture toughness is rise about four times at 4% vol. fraction. impact strength is improved about 65% at 4% vol. fraction, while hardness is improved about 3% at 4% vol. fraction . Ductile behavior almost appears in stress - strain curves of EP/ MgO nanocomposites. The mechanical properties for epoxy ZrO2/ MgO microcomposites reduce with increasing concentration of ZrO2/ MgO microparticles. this show nanoparticles overcome for others microparticles; thus addition quit small amounts .lead to particularly improvement in mechanical properties ,which can be explain through the pictures . Scanning Electron Microscope (SEM) pictures show the topography of fractured structure of EP/ ZrO2 nanocomposites and EP/ MgO nanocomposites with nanocracks of the epoxy structure at some of volume fractions of ZrO2/ MgO nanoparticles, while the topography of fractured structure show the nanocracks almost vanish from the structure because of adding ZrO2/ MgO nanoparticles was at minimum value at 2% vol. fraction of ZrO2 nanoparticles and 4% vol. fraction of MgO nanoparticles . this enhance by experimental results which we got it in the small raito addition .their influence to improve mechanical properties of epoxy. Dielectrical properties of EP/ ZrO2 nanocomposites and EP/ MgO nanocomposites show; Dielectric constant improved at low volume fraction of ZrO2/ MgO nanoparticles, while at higher concentration (> 10%) Dielectric constant of EP/ MgO nanocomposites stile increased and Dielectric constant begin to reduce in EP/ ZrO2 nanocomposites. Tan delta of EP/ ZrO2 nanocomposites little increase with increasing volume fraction ZrO2 nanoparticles, while Tan delta of EP/ MgO nanocomposites begin to reduce with increasing volume fraction of MgO nanoparticles.Thermal conductivity for EP/ ZrO2 nanocomposites and EP/ MgO nanocomposites have the same behavior with 1, 2, 3, 4, 5, 7, 10, and 15% vol. fraction. thermal conductivity of both EP/ ZrO2 nanocomposites and EP/ MgO nanocomposites increase with increasing the volume fraction. EP/ MgO nanocomposites and EP/ MgO nanocomposites have thermal conductivity lower than from EP/ MgO microcomposites and EP/ MgO microcomposites

تحضير ودراسة مفرق هجين من مادة (CuInTe2) == Preparation and Study Heterojunction From CuInTe2 Material

اسم المؤلف: شيماء قاسم عبد الحسن
اسم المشرف: بشرى كاظم حسون الميالي | فلاح ابراهيم مصطفى العطار
الموضوع العام: علوم الفيزياء
السنة: 2017
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: حضرت سبيكة CuInTe2(CIT) بطريقة التبخير الحراري في الفراغ بعد ها تم تحضير اغشية هذه المادة على قواعد من الزجاج بدرجات حرارة تلدين K((673,473 وسمك nm(900,600,300).تم فحص تركيب كل من سبيكة واغشية CIT المحضرة بظروف مختلفة بواسطة تقانة حيود الاشعة السينية .XRD وقد اظهرت نتائج حيود الاشعة السينية ان السبيكة وجميع الاغشية الملدنة عند درجة حرارة تلدين K(673 and 473) كانت تمتلك تركيبا متعدد التبلور من النظام الرباعي (Tetragonal) بالاتجاه البلوري السائد (112)، في حين كانت الاغشية المحضرة في درجة حرارة الغرفة (300)K ذات تركيب عشوائي. اما دراسة خصائص سطح اغشية CIT بواسطة مجهر القوة الذرية AFM فقد بينت زيادة الحجم الحبيبي مع زيادة كل من درجة حرارة التلدين والسمك.واظهرت القياسات البصرية لاغشية CIT انها تمتلك فجوة طاقة مباشرة، اذ تزداد فجوة الطاقة بزيادة درجة حرارة التلدين لجميع الاغشية المحضرة، وكذلك تم حساب النفاذية والثوابت البصرية مثل معامل الانكسار ومعامل الخمود وثابت العزل بجزئيه حقيقي والخيالي ضمن مدى الاطوال الموجيةnm (600 - 2700) .واظهرت نتائج الخصائص الكهربائية للاغشية المحضرة على قواعد الزجاج ان التوصيلية الكهربائية المستمرة D.C كانت تمتلك حاملات شحنة من النوع الموجب، وانها تزداد مع زيادة درجة حرارة التلدين لجميع الاغشية المحضرة في حين كانت تقل مع زيادة السمك .وان لهذه الاغشية طاقتي تنشيط، اي انها تملك اليتين للانتقال الالكتروني.كما بينت ايضا نتائج تاثير هول ان الاغشية كانت تمتلك حاملات شحنة من النوع (p - type).في هذا البحث ايضا تم تصنيع خلايا شمسية من ترسيب اغشية CITعلى قواعد سليكونية مكونة من المفارق الهجينةSi/CIT) ) الملدنة بدرجات حرارة وسمـــك مختلفة، واخرى على قواعد مكونة من زجاجFTO , ITO للمفارق الهجينة ITO/ CdS/ CIT)) و(FTO/CdS/CIT)، وكذلك ITO/ZnO/CdS/CIT)) و(FTO/ ZnO/CdS/CIT) المرسبة بطريقة التبخير الحراري . تم قياس سعة الانحياز العكسي كدالة لفولتية الانحياز عند التردد الافضل 10)KHz) وبينت هذه النتائج ان المفارق من النوع الحاد، كما قلت السعة بزيادة جهد الانحياز العكسي وهبوط جهد البناء الداخلي بزيادة درجة حرارة التلدين .واظهرت دراسة خواص (تيار - جهد) في حالة الاضاءة للمفارق الهجينة المحضرة بان افضل مفرق لتصنيع خلية شمسية على القواعد السليكونية كان للمفرق المحضر بسمك 600)nm (بدرجة حرارة تلدين (673)K. اذ بلغت الكفاءة التحويلية (%1.8) وعند طلاء هذه الخلية بطبقة مضادة للانعكاس من مادة TiO2 بسمك 600)nm) ازدادت الكفاءة لتصل الى (2.4%). | CuInTe2 (CIT) alloy prepared by thermal evaporation technique then prepared thin film from this alloy on glass substrate of different thickness (300,600 and 900 ±20)nm and at different annealing temperature (473 and 673)K.The structure of the alloy and CIT films which prepared at different deposition condition are examined using x - ray diffraction (XRD) technique.XRD analysis show that the alloy and the films prepared at (473 and 673)K have polycrystalline structure of tetragonal type with preferred orientation[112],while films prepared at R.T(300)K show amorphous structure. CIT films morphology were studied using AFM techniques, the results show that increase in grain size with increase thickness and annealing temperature .The optical measurement show that CIT films have a direct energy gap and it increase the increasing annealing temperature ,the transmittance and optical constant such as refractive index ,extinction coefficient and the dielectric constant with both part real and imaginary within the wavelengths in the range (600 - 2700)nm were calculated too.Electrical properties results for films prepared on glass substrate as a function of thickness and annealing temperature show that the electrical conductivity D.C were p - type and it with increasing annealing temperature while it decrease with increasing thickness, all films have two activation energies with two mechanisms of transport of free carriers .Hall effect results show that all films were p - type.In this research, fabrication solar cells from deposition CIT films with different thickness and different annealing temperature on silicon substrate (Si/CIT) heterojunction and another deposition on FTO,ITO substrate to fabricated solar cell from (ITO/CdS/CIT) ,) FTO/CdS/CIT) heterojunction and (ITO/ZnO/CdS/CIT) , (FTO/ZnO/CdS/CIT) heterojunction by using thermal evaporation technique.The C - V measurements as a function of reverse bias voltage at frequency (10KHz) show that the heterojunctions are abrupt type, the capacitance decrease as reverse bias voltage increase and the value of built - in potential decrease with increasing annealing temperature. The current - voltage characterization study for heterojunction prepared under illumination shows that the solar cell which have optimum condition deposition on silicon substrate with the thickness 600nm at annealing temperature 673K, have best efficiency (1.8%) among other cells, and after coating this cell by antireflection coating (TiO2) with thickness (600)nm, the value of efficiency increase to(2.4%)

التركيب المورفولوجي والخواص البصرية لاغشية In2O3 الرقيقة == Morphology Structural and Optical Properties of In2O3 Thin Films

اسم المؤلف: شيماء احمد كاظم
اسم المشرف: علية عبد المحسن شهاب
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يتناول هذا البحث دراسة تاثير تغير زمن الاكسدة ودرجة حرارة التلدين على الخصائص التركيبية والبصرية لاغشية اوكسيد الانديوم الثلاثي (In2O3) الرقيقة التي تم تحضيرها بتقنية التبخير الحراري في الفراغ ، حيث تم ترسيب معدن الانديوم (In) على قواعد من الزجاج واخرى من السليكون بدرجة حرارة الغرفة (300 K) وبسمك (400 ± 10 nm) وبمعدل ترسيب 5.47 ± 0.5 nm/sec)) ، ومن ثم اكسدة اغشية (In) المحضرة حراريا بدرجة حرارة (673 K) وبوجود الهواء وبزمن مختلف (ساعة ، ساعة ونصف ، ساعتان) ، بعد ذلك تم اجراء التلدين بدرجات حرارة مختلفة K (323 , 373 , 423) على اغشية (In2O3) المؤكسدة بزمن ساعة واحدة باعتبار ان هذا الزمن هو افضل زمن اكسدة من ناحية قيم فجوة الطاقة البصرية والحجم الحبيبي والخشونة ومعدل الخشونة . درست الخصائص التركيبية للاغشية المحضرة (قبل التلدين وبعده) عن طريق تقنية حيود الاشعة السينية (XRD) التي اظهرت ان هذه الاغشية ذات تركيب بلوري متعدد ومن نوع مكعب ، وكذلك تم استخدام مجهر القوة الذرية (AFM) والمجهر الالكتروني الماسح (SEM) لدراسة طوبوغرافية السطح من ناحية التجانس والخشونة ومعدل الخشونة . درست الخصائص البصرية للاغشية المحضرة (قبل التلدين وبعده) باستخدام المطياف البصري (Optical Spectrometer) ، حيث تم حساب فجوة الطاقة البصرية والتي كانت ذات قيمة اقل عند زمن اكسدة ساعة وعند درجة تلدين (323 K) ، بالاضافة الى دراسة طيف كل من الامتصاصية والنفاذية والانعكاسية ، وايضا تم حساب الثوابت البصرية وهي : معامل الامتصاص ، معامل الانكسار ، معامل الخمود ، ثابت العزل بجزئيه الحقيقي والخيالي كدالة لطاقة الفوتون ، وقد بينت النتائج ان زيادة قيم هذه الثوابت متعلقة بزيادة زمن الاكسدة ودرجة حرارة التلدين. | This research examines the effect of changing time of oxidation and the degree of annealing temperature on the structural and optical properties of membranes dioxide triple indium (In2O3 thin) that was prepared technology thermal evaporation in a vacuum, where the deposition of metal indium (In) on the glass and silicon substrate at room temperature (300 K) and thickness (400 ± 10 nm) and the rate of deposition of (5.47 ± 0.5 nm / sec) , and then oxidation films (In) prepared thermally and the presence of air at a different (hour, hour and a half, two hours) , then annealing was performed at different temperatures (323, 373, 423) K films (In2O3) oxidizing a time of one hour, considering that this time is the best time of antioxidants in terms of optical energy gap and grain size and roughness values and the rate of roughness . Structural properties of prepared films have been studied (before and after annealing) by X - ray diffraction technique (XRD) which showed that these films with the structure of crystalline multi it cubic type, as well as the use of an atomic force microscope (AFM) and electron microscopy scanner (SEM) to study the topography of the surface in terms of homogeneity and roughness and the rate of roughness . Optical properties of prepared films have been studied (before and after annealing) using the optical spectrometer, where the optical energy gap , and which were less valuable when oxidation hour time account and at a temperature annealing (323 K) , in addition to the study of spectrum both absorbance and transmittance and reflectivity , and was also the optical constants account : the absorption coefficient, refractive index, extinction coefficient, dielectric constant real and imaginary as a function of photon energy, the results have been shown to increase the values of these constants related to increased oxidation time and the annealing temperature.

دراسة تاثير خطوط الضغط العالي على تراكيز غاز الرادون في الهواء باستعمال كاشف الاثر النووي CR - 39 == Study of The Effect of High Voltage Power Lines on Radon Concentrations in Air Using Solid State Nuclear Track Detector CR - 39

اسم المؤلف: زينة جميل رحيم عبد علي
اسم المشرف: خالد هادي مهدي العبيدي | ندى فاضل توفيق
الموضوع العام: علوم الفيزياء
السنة: 2009
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يتضمن الهدف من البحث دراسة تاثير خطوط الضغط العالي 132kV)و400kV ) في مناطق منتخبة من مدينة بغداد على تراكيز الرادون ونواتج انحلاله باستعمال كاشف الاثر النووي CR - 39. تم توزيع عدد من الكواشف بابعاد (2x1cm²) ولمدة شهر كامل داخل وخارج محطتي بوب الشام 400kV والوزيرية 132kV , كذلك في عدد من الدور السكنية القريبة من خطوط الضغط العالي 132kV ومحطة المعري 132kV القريبة من منطقة العدل ببغداد خلال فصل الخريف. تم تحديد تراكيز الرادون خلال المقارنة مع العينات القياسية، ومن خلال النتائج المستحصلة كانت قيمة المعدل الموزون لتراكيز الرادون داخل الابنية تحت تاثير خطوط الضغط العالي 400kVهي 91.77±0.1122Bq/m³)) وفي الخارج كانت مساوية الى (125.73± o.117 Bq/m³) وتحت تاثير خطوط الضغط العالي 132kV في الداخل كانت مساوية الى 60.03± 0.266 Bq/m³)) اما في الابنية البعيدة عن خطوط الضغط العالي فقد كانت مساوية الى Bq/m³) 23.265± 0.77) وفي خارج الابنية 13.63± 0.99 Bq/m³)) يتضح خلال نتائج الدراسة ارتفاع تراكيز غاز الرادون في المناطق القريبة من خطوط الضغط العالي وبشكل ملحوظ مقارنة مع المناطق البعيدة عن الخطوط مما يدل على ان هناك تاثيرا واضحا لخطوط الضغط العالي على تراكيز غاز الرادون ويزداد هذا التاثير بزيادة شدة المجال الكهرومغناطيسي والقرب من هذه الخطوط, كما كان لخطوط 400kV تاثير اقوى من خطوط 132kV على تراكيز الرادون في الهواء, اما تراكيز غاز الرادون داخل الابنية فكانت اعلى من تراكيزه خارج الابنية , وهذه الزيادة في التركيز تعود الى ان جدران الابنية تعد المصدر الرئيس لتوليد الرادون داخل الابنية , حيث تبين ان مواد البناء قد ادت دورا مهما في زيادة تراكيز غاز الرادون داخل الابنية بالاضافة الى عمر الابنية والارتفاع عن مستوى سطح الارض . | The aim of this research the study of the effect of high Voltage power lines (400kVand132kV) upon radon concentration and its decay results by using nuclear track detectors CR - 39 inside Baghdad city. A number of detectors with the dimensions (2x1cm2) was scattered for a whole month indoor and outdoor Bob Al - sham station 400kV and Al - waziriya station 132kV as well as in number of the houses which are very close from the high voltage power lines 132kV and Al - maary 132kV during autumn. The concentrations of radon were determined through the comparison with the standard samples , The results shows that the value of Weighted Average of radon concentration indoor the buildings which are under the effect of high voltage 400kV is (91.77 ± 0.117Bq/m3) and under the effect of high voltage lines 132kV indoor is equal to (60.03±0.266Bq/m3) ,As for the buildings which are far away from the high voltage lines , it was equal to (23.2651± 0.773Bq/m3) and outdoor the buildings (13.63±0.99 Bq/m3) . The results showed that increase of radon concentration in the areas which are close to high voltage power lines compared with areas which are far away from the lines which show that there is a clear effect of high voltage power lines upon the concentration of radon . And this influence increases with increase of the intensity of electromagnetic field as well as the near distance with these lines .For there was a stronger effect of 400kV lines than 132kV lines upon radon concentration in air, Also the concentration of radon gas indoor the building were higher from its concentration outdoor the building . And this increase in concentration is due to the fact that the walls of the buildings are considered to be the main source for generating radon indoor the building as well

الخواص التركيبية والبصرية والكهربائية لاغشية اوكسيد النيكل المحضرة بطريقة الترذيذ كمتحسس غازي == The structural, optical and electrical properties of NiO films prepared by RF - Sputtering as gas sensor

اسم المؤلف: زينب طارق عبد الحميد
اسم المشرف: قاسم عزيز محمد | محمد عبد النبي
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The structural, optical, electrical, and gas sensing properties of nickel oxide have been studied. The structural properties of the deposited films were made using XRD, SEM and AFM. The NiO films have been prepared with different thicknesses (100, 150 and 200) nm on glass, Si and Al2O3 substrates, using RF - sputtering at 100°C substrate temperature. The electrical and optical parameters of the NiO films were characterized using Hall Effect and transmittance measurements.The X - ray diffraction result indicates that the films are of polycrystalline in nature with cubic structure. The grain size of the nanoparticales observed at the surface depended of films thicknesses, where 200 nm has smallest average grain size 85.5 nm and RMS increased with increasing of thicknesses.The optical characterization shows that the film has band gap that ranged in between 3.6 eV to 3.9 eV, the average transmittance of films was found to be ranged of 60% to 85% in the VIS - IR regions. The dark conductivity of NiO films has been studied as a function of film thickness, crystal structure transformation and temperature with particular regard to gas sensitivity in CO2, NO2, CO, NO and the ethanol vapor. The electrical properties were found to be dependent on the film thickness.I - V characteristics for NiO films at (air, vacuum, N2, O2andCO2) gases before and after annealing were investigation. It would appear from our result that the diminution of the dark conductivity after annealing may be due to the surface contaminations adsorbed on the surface of the NiO film during film preparation or from ordinary atmospheric air.The resistivity of the NiO thin films decreased with increasing of thicknesses, from 1.5x105 to 5.4x104 (Ω.cm), which is related to the increase of carrier concentration with film thickness. The results of measurements of NiO thin films show that these films have good conductivities and results obtained from Hall Effect indicate that the NiO films were (p - type).It was found that the sensitivity to other gases differs for different film thicknesses and working temperature. Furthermore, NiO films exhibits high and fast response to NO2 gas at 200°C, which makes it a promising candidate for a poisonous gas sensing.

تقييم المقاطع العرضية لليورانيوم للتفاعلات المستحثة بالنيوترون == Cross Sections Evaluation of Uranium for Neutron Induced Reactions

اسم المؤلف: روناك اكرام علي
اسم المشرف: ايمان طارق العلوي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: لقد تم في هذا البحث حساب قيم المقاطع العرضية لنظائر اليورانيوم (A=230 - 238) للتفاعلات المستحثة بالنيوترونات التالية ,,,(n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), (n,γ), (n,p), (n,t), (n,d), (n,α), (n,2α),and (n,2p)المقاسة بفترات مختلفة من الطاقة حيث ان هذه القراءات تم اخذها من الوكالة الدولية للطاقة الذرية (IAEA ) ومن المكتبات المشهورة عالميا مثل EXFOR, CINDA, ENDF, JEFF, JENDL,ROSFOND,CENDL,WIND, TENDL, BROND, IRDF, EAF وقد تم قياسها في الفترة الاولى من منتصف القرن الماضي وحتى اخر سنوات الماضية .لقد تم تحليل المديات الكاملة للطاقة لكل تفاعل وقد تم اعادة حساب وتقييم المقاطع العرضية ضمن فترات صغيرة مختلفة حسب مديات الطاقة للنيوترون القاصف مع الاخطاء المرافقة لها. قد تم وضع صيغ رياضية لمتعددة الحدود في معظم التفاعلات والتي تربط بين تغيير المقطع العرضي مع الطاقة والتي يمكن استخدامها للتنبىء بقيم المقاطع العرضية غير المحسوبة. لقد تم حساب قيمة Q - للتفاعل وطاقة الربط وطاقة العتبة وفرق الكتلة وعامل الرص لكل تفاعل ولكل عنصر هدف. ان التقييمات اعتمدت بشكل رئيسي على حسابات نموذج الجهد البصري لقد اعتمدت الحسابات على معاملات الجهد البصري النووي حيث تم اختيار وجمع المعلومات من مكتبة (RIPL) التابعة للوكالة الدولية للطاقة الذرية. لقد قمنا بدراسة صيغتين مختلفتين لنموذج الجهد البصري حيث ان الصيغة الاولى تسمى نموذج الجهد البصري القياسي والمعاملات ماخوذة من مكتبة Beijing والصيغة الثانية لنموذج الجهد البصري قد تم حسابها بتحديد ثلاث مديات طاقية. لقد قمنا بدراسة نسبة التفاعل (n,f) لكل نظير من نظائر اليورانيوم نسبة الى يورانيوم - 235 والذي يعتبر نموذج قياسي. لقد قمنا بحساب هذه النسبة لجميع التفاعلات المتوفرة لدينا وليس فقط تفاعل الانشطار واحتسبناها نسبة الى يورانيوم - 235.حساب اخر تم اضافته الى هذه الدراسة وهو دراسة تاثير التلوث لوليدة اليورانيوم - 237 والتي هي نبتونيوم - 237 بعمر نصفي 6.8 يوم وكذلك حساب الفيض النيوتروني لكل منهما. | The cross sections of Uranium isotopes (A=230 - 238) for the (n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), (n,γ), (n,p), (n,t), (n,d), (n,α), (n,2α),and (n,2p) reactions are calculated with different energy intervals which are collected from International Atomic Energy Agency (IAEA). The available cross sections data for the reactions mentioned above are collected from the well known international libraries like EXFOR, CINDA, ENDF, JEFF, JENDL, ROSFOND, CENDL, WIND, TENDL, BROND, IRDF, EAF and measured during the period from the middle of the last century up to several years ago.The cross sections are reproduced in fine steps of incident neutron energy in different intervals with the corresponding errors. The recommended cross sections for all available experimental data have been calculated for all considered reactions mathematical representative equations for all these reactions are formulated. These equations represent the variation of the cross section with energy, which could be used to predict the values of uncalculated cross sections.Q - value, threshold energy, binding energy, mass excess, and packing fraction for each reaction and target element have been also calculated.The evaluations are based mainly on the calculations of the optical model potential. The calculations are based on the nuclear optical potential, where the relevant parameters are collected and selected from Reference Input Parameter Library (RIPL) which is being developed under the international project coordinated by the International Atomic Energy Agency (IAEA). We study two different formula for optical model potential the first formula is the standard optical potential model and its parameters are taken from Beijing library. The second formula is the optical potential with different energy ranges. We study the ratio of the (n,f) cross sections for each Uranium isotopes relative to (n,f) cross section for U - 235 which could be considered as a standard sample. We have done the ratio not for the (n,f) cross sections only but also for other reactions like ,(n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), and (n,γ) relative to U - 235 reactions cross sections.Another evaluation is added to cross sections is the effect of the contamination of the daughter of U - 237 which the daughter is Np - 237 6.8day and their relative flux

دراسة تاثير المعاملة الحرارية على الخواص التركيبية والميكانيكية لبوليمر (بولي تيترافلورواثيلين) == Study the Effect of Heat Treatment on the Structural and Mechanical Properties for poly (tetrafluoroethylene

اسم المؤلف: رند باسم لطفي الكرخي
اسم المشرف: مي عبد الستار محمد نجيب
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: درس في هذا العمل نوعين من بولي تيترافلورواثيلين ( النقيين ولكن باختلاف الشركة المصنعة PTFE) (صيني _اماراتي ) بطريقه صب المحلول كافلام رقيقه واشرطة , بواسطه الخواص التركيبيه (حيود الاشعه السينيه ومسعريه المسح التفاضلي ) والخصائص الميكانيكية بدلاله درجات حراره مختلفة للدوره الحرارية . يبين كلا النوعين تغير في الشده المستطاره من المستوى القاعدي (100) عند تغير درجه حرارة الدورة الحرارية واظهر النوعين زيادة في التبلورية مع زياة درجة الحرارة .كذلك اختلاف في الانثالبي عند اختلاف درجات الحرارة حيث لوحظ زياة الانثالبي بزيادة درجة الحرارة واختلاف في الخصائص الميكانيكيه ( الاجهاد والانفعال عند نقطة الخضوع ونقطه الكسر ومعامل يونك) للبوليمر حيث اظهرت المعالجة الحرارية للبوليمر بدرجات حرارة مختلفة من اجل معرفة خصائصه ومقاومته الى الظروف البيئية ان الخواص الميكانيكية تزداد زيادة خطيا مع زيادة درجة الحرارة .لوحظ بان انتاج الشركه المصنعة الصينية افضل من ناحية النتائج لايجاد درجة التبلورية والخصائص الميكانيكيه عن انتاج الشركة المصنعة الاماراتية لنفس المادة البوليمرية | In this study two modifications of pure polytetrafluoroethylene (PTFE) [C2F4]n. China_UAE source prepared from solution cast as film and strip have been studied by structural (X - ray diffraction (XRD), Differential Scanning Calorimetry (DSC)) and mechanical properties .subjected to different temperature heating cycle. Both modifications show variation in the scattered X - ray intensity of the basal plane (100) as the temperature of heating cycle is changed and show increasing in crystallinity with the increase of temperature .Moreover, the Enthalpy of each kind is changed with difference of heat treatment where the enthalpy increase with the increase of temperature, and two modifications show different in mechanical properties for PTFE (young's modulus, stress at break, stress at yield, elongation at yield. And elongation at break) when the temperature is change ,The heat treatment of polymer to different temperatures in order to know its properties and resistance to environmental conditions results showed that the mechanical properties increase linearly with the increase of temperature.It seems that the product company of china is better than the product company of UAE in degree of crystallinity and mechanical properties for this polymer.

الدراسه النظريه لتصميم ماكنه بؤره البلازما وتحقيق العوامل المختلفه التي تؤثر على حصيله النيترون المنبعث == Theoretical study to design plasma focus machine and investigate various parameters that affect its emitted neutron yield

اسم المؤلف: رنا عيســـى بــك مــــراد
اسم المشرف: مصطفى كامل جاسم | رعد حميد مجيد
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: فيزياء البلازما
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا البحث تم تصميم جهاز بؤرة البلازما الكثيفة نظريا بالاعتماد على موديل (لـــي) بناءا المعادلات الرياضية لنموذج لي لكل من هندسة القطبين وعناصر الدائرة الخارجية التي تضم متسعة ومحاثة ومقاومة (RLC). وبعد اجراء الحسابات اللازمة تم ادخال نتائج التصميم في برنامج لرؤية مدى امكانية تشغيله نظريا من خلال دراسة المعلمات المختلفة التي يوفرها البرنامج وبالتالي التعرف على ظروف تشغيله والعوامل المؤثرة عليه. لقد اختير غار الديترويوم كغاز عامل في هذه المنظومة للحصول على ناتج نيتروني من اجل التفاعل النووي الاندماجي. وتم اختبار ودراسة المنظومة عند ضغطين مختلفين (3و4 تور) حيث درست مختلف معلماتها التي يوفرها البرنامج ونوقشت وقورنت النتائج بالاشكال البيانية. اضافة لذلك تمت مقارنة المنظومة المصممة مع منظومة قياسية تناظرها من حيث التركيب النظري وهي منظومة NX2 التي بنيت اساسا للحصول على الاشعة السينية باستعمال غازات النبيلة. اختير في البحث ان يكون غاز الديتريوم هو الغاز العامل للحصول على ناتج نيتروني من اجل المقارنة، حيث درست جميع معلمات التشغيل للمنظومة المصممة مع القياسية بالرسوم البيانية.لقد وجد من خلال انجاز الحسابات اللازمة بان الشكل البياني لانحدار تيار الانبوب الكلي (dip) مباشرة بعد قمة التيار مع الزمن للمنظومة المصممة متفق تماما مع الشكل العام المميز لمنظومات بؤرة البلازما التجريبية دلالة على ان حسابات التصميم صالحة لهذه المنظومة وبالتالي يمكن اجراء الحسابات. ان تصرف فولتية الانبوب مع الزمن للمنظومة المصصمة كان بنفس الشاكله مع المنظومة القياسية. وينطبق هذا على سلوك المعلمات الاخرى بين المنظومتين مثل السرعة والمسار المحوريان والمسار الى الداخل للصدمة الشعاعية ومسار وسرعة استطالة القرص ومسار وسرعة الصدمة المنعكسة شعاعيا وغيرها.تم دراسة ومقارنة تغيرات درجة حرارة البلازما مع الزمن للمنظومتين عند نفس الضغط ولضغطان مختلفان للمنظومة المصممة وكان تصرف ماكنتا بؤرة البلازما بنفس الطريقة. وتم حساب الخسائر المتولدة من الماكنتان مثل خسائر جول وبرمنشتهالنك واعادة الاتحاد وخسائر الطاقة الشعاع الخطي مع الزمن. اخيرا وجد ان المنظومة المصممة ( 1.66 × neutron per shot ) توفر ناتج نيتروني اكبر من المنظومة القياسية (5.15 × neutron per shot) . لقد تصرفت المنظومة المصممة مثل المنظومة القياسية لكن كان الاختلاف في سلوك المنظومة المصممة والقياسية هو اختلاف الترتيب الهندسي للمنظومتين من حيث هندسة الاقطاب واختلاف قيم العناصر الكهربائية للدائرة الخارجية. ان المنظومة المصممة نظريا في هذا البحث يمكن ان تكون مشروع لبناء ماكنة بؤرة بلازما تطبيقية للحصول على ناتجها النيتروني العالي للاستفادة منه في اجراء تفاعل الاندماج النووي.

دراسة الخواص البصرية والكهربائية لمتراكبات PMMA/ اكسيد المعادن == Study the Optical and Electrical Properties of PMMA/Metal Oxide Composites

اسم المؤلف: رسل طه حسين
اسم المشرف: رغد صبحي الخفاجي
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يهدف هذا البحث الى تحضير متراكبات ثلاثية هجينة من PMMA مقواة بجسيمات TiO2 - Al2O3 وZrO2 بتقنية الصب .تم استخدام كسور وزنية (84 - 92) wt % من بولي ميثيل ميثا اكريلك ونسبة ثابتة % (4) من تيتانيا مع نسب وزنية تتراوح بين wt % (4 - 12) للالومينا والزركونيوم. تم دراسة المواصفات التركيبية من خلال حيود الاشعة السينية ومجهر القوة الذرية. بينت فحوصات صور مجهر القوة الذرية تجانس في البناء البلوري. اما الخواص العزلية فقد فحصت من خلال قياس ثابت العزل عند مدى تردد (102 - 106) Hz وبينت النتائج ظهور تاثير طفيف عند اضافة الالومينا للمتراكب الهجيني (PMMA - TiO2 - Al2O3) مقارنة بمضاف الزركونيوم للمتراكب الهجيني (PMMA - TiO2 - ZrO2) حيث قيم ثابت العزل تزداد مع زيادة التركيز (3.408500 - 10.69851). في حين يتناقص عامل الفقد بزيادة التردد للمتراكبات (PMMA - TiO2 - Al2O3)و(PMMA - TiO2 - ZrO2) . قيست التوصيلية الكهربائية المستمرة لمدى درجات حرارية تتراوح بين ( 313 - 373 )K ولوحظت زيادة في القيم التوصيلية بزيادة التركيز ودرجة الحرارة (5.5E - 10 - 8.52E - 10) (Ω.m) - 1 في حالة الزركونيوم المضاف للمتراكب الهجيني. تم حساب الثوابت البصرية للعينات المحضرة كدالة للطول الموجي وذلك باستخدام مطياف بمدى nm( - 1100200). حيث تم حساب معامل الامتصاص، معامل الخمود، معامل الانكسار وفجوة الطاقة البصرية, ومن حساب النتائج نلاحظ ان قيم معامل الامتصاص ومعامل الخمود ومعامل الانكسار لل(PMMA - TiO2 - Al2O3) اعلى من (PMMA - TiO2 - ZrO2) كدالة للطول الموجي، نلاحظ ايضا، انخفاض في قيم فجوة الطاقة البصرية المسموحة eV (2.90 - 2.50) في متراكبات الالومينا بينما من (2.90 - 2.58) eV للزركونيوم. وكذالك فجوة الطاقة البصرية الممنوعة (2.85 - 2.48) eV الكترون فولت للالومينا بينما eV (2.85 - 2.52) للزركونوم . | This study aims to synthesize ternary hybrid composites PMMA polymer matrix with TiO2, Al2O3 and ZrO2 as additives using casting technique. the weight fractions of matrix with range (84 - 92) wt %, fixed percentage (4) % of TiO2 and range of weight fractions with range (4 - 12) wt % of Al2O3 and ZrO2 were used as started materials. Characterization properties were examined through XRD and AFM. Obtained micrograph and XRD revealed homogeneity structure for Al2O3 filler. Dielectric properties such as dielectric constant were carried for range (102 - 106) Hz frequency .The addition of Alumina filler exibits slightly effect on dielectric constant values for prepared ternary hybrid composite (PMMA - TiO2 - Al2O3 ) compared with ZrO2 for ternary hybrid composite (PMMA - TiO2 - ZrO2) where dielectric constant increases as concentration increases (3.408500 - 10.69851) . Dissipation factor decreases with increasing frequency in composite (PMMA - TiO2 - Al2O3) and (PMMA - TiO2 - ZrO2). DC electrical conductivity was conducted in temperature range ( 313 - 373 )K. Markedly increasing for the DC electrical conductivity of Zirconia filler with respect to additional concentration (5.5E - 10 - 8.52E - 10) (Ω.m) - 1 .Otherwise DC electrical conductivity increases versus applied temperature for both prepared composites. Optical constants (extinction coefficient, absorption coefficient, and Index of refraction), optical energy gap were obtained for prepared Specimens as function of wavelength using spectrometer at range (200 - 1100)nm. It was noticed that the values of extinction coefficient ,coefficient of absorption , and refractive index for (PMMA - TiO2 - Al2O3) are higher from that of (PMMA - TiO2 - ZrO2) as wavelength, also, more decreasing in allowed optical energy gap values from (2.90 - 2.50 eV) for Al2O3 filler and from (2.90 - 2.58 eV) for ZrO2 as additive. Also forbidden optical energy gap decreases in case Al2O3 from(2.85 - 2.48) eV while from (2.85 - 2.52) for ZrO2 as additive.
1 ... 7 8 9 10 11 ... 18