عرض: 25 50 75 100 النتائج

نتائج البحث: 25 من أصل 4,674

المتحسسات الطبيعية للخلايا الشمسية ذات الصبغات المتحسسة على قواعد اوكسيد الخارصين == Natural Sensitizer for Dye - Sensitized Solar Cells Based on Zinc Oxide

اسم المؤلف: اوراس طارق شاكر
اسم المشرف: صلاح عبد الله حسون | رعد محمد صالح الحداد
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: This thesis focused on the study of dye - sensitized solar cells (DSSCs) based on ZnO nanoparticle as a semiconducting layer with two natural dyes.The present study began by synthesizing ZnO nanoparticles by two methods. The first method ZnO nanoparticles prepared by sol - gel method with (0.1, 0.2, 0.3 M) zinc acetate and then thin films of zinc oxide prepared by using spin coating technique with thickness equal to (109 nm), while the second method technique of ZnO nanoparticles prepared by sol gel method (0.2 M) from zinc acetate was selected as the optimum concentration to make thin film of zinc oxide (In the form of a paste) by using doctor - blade technique with thickness equal to (111nm).The effective mass model for spherical particles (Brus equation) for ZnO nanoparticles were (1.3147, 1.4056, 1.6379 nm) for three concentration.The characteristic of the prepared films on glass substrates have been examined by X - ray diffraction analysis (XRD), UV - Vis spectroscopy, photoluminescence spectrum (PL), scanning electron microscopy (SEM), Atomic Force Microscope (AFM) and Thermo Graviometric Analysis (TGA).In both methods , ZnO films were prepared on transparent conducting oxide (ITO) coated glass then addition of chlorophyll as sensitized dye which extracted from spinach leaves and anthocayanin pigment from pomegrenate juice and they were used as the working electrode (anode) of dye - sensitized solar cell (DSSCs).The absorption spectra of all dyes were performed by UV - Visible spectroscopy which showed that the dye absorbed light in the visible region from (400 nm) for chlorophyll pigment and (510 nm) for anthocyanenpigment.The (I - V) characteristic curves of the fabricated tow cells were measured and studied at constant light intensity. All photovoltaic parameters of the cells were presented. The results revealed that the extract of Pomegranate by using spin coating lead to the highest efficiency (15%).

دراسة النشاط الاشعاعي لعضوين بشريين الثدي والرحم باستخدام كواشف الاثر CR - 39 واللكسان == Studying The Radioactivity In Two Human Organs Breast And Uterus Using CR - 39 And Lexan Track Detectors

اسم المؤلف: انعام ياسين حسن
اسم المشرف: ندى فرحان كاظم
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: استخدمت تقنية التنشيط بالتشعيع النيوتروني لتحديد تراكيز اليورنيوم الموجودة في عينات الانسجة البشرية التي تم دراستها في هذا البحث (رحم , ثدي) وذلك عن طريق تشعيع النماذج بعد تحضيرها وكبسها الى اقراص صغيره بقطر (2cm) وسمك (1mm) ووضعها بين قطعتين من كواشف الاثر للحاله الصلبه المستخدمة في هذا البحث وهي كاشفي (CR - 39) واللكسان.تم تشعيع النماذج المحضره (كاشف - عينه - كاشف) بالنيوترونات المنبعثة من المصدر النيوتروني النظائري (امريشيوم 241 - بريليوم) ذو الفعالية الاشعاعية (38mCi) لاجل شطر اليورانيوم الموجود في العينات وتسجيل اثار شظايا الانشطار على الكاشف. تم في هذا البحث ايضا اختبار ازمان مختلفة للقشط الكيميائي لاجل الوصول الى زمن القشط المناسب لاضهار اثار شظايا الانشطار لكلا الكاشفين المستخدمين مره باستخدام الحمام المائي واخرى باستخدام الميكروويف (لاول مره في هذا البحث). وقد تبين ان افضل زمن قشط لكاشف CR - 39)) (30min)عند استخدام الحمام المائي و(8min) عند استخدام المايكروويف ولكاشف الليكسان (60 min ) عند استخدم الحمام المائي و(5 min ) عند استخدام الميكروويف.وقد اتضح ان عدد الاثار التي ظهرت باستخدام الميكروويف كانت اقل بقليل من التي ظهرت باستخدم الحمام المائي لكنها اكثر وضوحا. بينت هذه الدراسة ان متوسط تراكيز اليورانيوم في نسيج الرحم المحسوبة باستخدام كاشف CR - 39 المقشوط كميائيا باستخدام الحمام المائي هي (0.062ppm) وللكشف المقشوط باستخدام الميكروويف هي (0.047ppm). في حين كانت التراكيز في نفس النسيج المحسوبة باستخدام كاشف الليكسان المقشوط باستخدام الحمام المائي هو( (0.054ppmوللمقشوط باستخدام الميكروويف هي .(0.047 ppm)كما بينت الدراسة ايضا ان متوسط تراكيز اليورانيوم في نسيج الثدي عند استخدام كاشف CR - 39 المقشوط كميائيا باستخدام الحمام المائي 0.060ppm))وللمقشوط باستخدام المايكروويف هي(0.039 ppm). في حين كانت التراكيز من نفس النسيج المحسوبه باستخدام كاشف الليكسان المقشوط باستخدام الحمام المائي (0.034ppm) وللكواشف المقشوطه باستخدام الميكروويف .(0.040ppm) | Neutron activation technique irradiation is used to determine uranium concentration in human tissues samples (uterus, breast) that have been studied in this research through irradiation samples with neutron source (241Am - Be) after prepared into small disk diameter (2cm) with thickness (1mm) and inserted between two pieces of solid state nuclear track detector (CR - 39,Lexan) used in this research. The samples have been irradiation (detector - sample - detector) with neutron emitted from isotopic neutron source (241Am - Be) with activity (38mCi) to fission uranium in the samples and registrar fission fragment tracks on the detector. CR - 39 and Lexan track detectors etched using (NaOH) with normality (6.25N) at different etching time using water bath and microwave. In this research we found the optimum etching time for CR - 39 is (30 min) when using water bath and (8 min) when using microwave. While for lexan detector is (60 min) when using water bath and (5 min) when using micro wave, and also the number of tracks which appear by using microwave is slightly less and clear than that appear by using water bath. This study shows that the average uranium concentration in uterus tissues when CR - 39 detector used in water bath is (0.062ppm) and detector etching by using microwave is (0.047ppm),While the average concentrations using lexan detector when used water bath is (0.054ppm) and etching by using microwave is (0.047 ppm). This study is shows also the average uranium concentrations in breast tissues when CR - 39 detector used in water bath etching is (0.060ppm) and by microwave etching (0.039ppm) and the concentrations using lexan detector when used water bath is (0.043ppm) and etching by using microwave is (0.040 ppm).

تاثير اغشية (SnO2) كالكترود على كفاءة الخلية الشمسية == The effect of SnO2 thin film as an electrode on the efficiency of solar cells

اسم المؤلف: انغام زهير نجم
اسم المشرف: بتول درعم بلاوه
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الاغشية الرقيقة
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذاالبحث حضرت اغشية 2) SnO) النانوية الرقيقة بطريقة الرش الكيميائي الحراري لمحلول كلوريدات القصدير المائية (Sncl2.2H2O ) وبتركيز (0.05 ) مولاري وبدرجة حرارة ثابتة تقريبا وباسماك مختلفة وعلى نوعين من القواعد النوع الاول هي القواعد الزجاجية وذلك من اجل دراسة الخصائص البصرية والتركيبية للغشاء . اما النوع الثاني فكان قواعد من خلايا شمسية سليكونية من نوع اتصال (p - n) لدراسة تاثير الغشاء كقطب توصيل على كفاءة الخلية الشمسية . تم في هذا البحث تشخيص الاغشية من خلال حيود الاشعة السينية وتبين بان الغشاء ذات طبيعة متعددة التبلور وباتجاهية سائدة (110,101,211 ) .اوضحت قياسات الخواص البصرية من خلال دراسة سلوك منحني النفاذية والامتصاصية كدالة للطول الموجي ان الاغشية ذات نفاذية عالية للاطوال الموجية في المنطقة الطيفية nm(900 - 600) وهذا مايؤهلها للاستخدام كقطب توصيل مضاد للانعكاس ضمن هذه المنطقة وان النفاذية تزداد بنقصان السمك وان منحني الامتصاصية والانعكاسية يسلك سلوكا معاكسا لمنحني النفاذية .اظهرت دراسة الانتقالات الالكترونية حدوث جميع الانتقالات الالكترونية .ومن خلال دراسة قيم معامل الامتصاص اتضح بان الانتقالات الالكترونية المباشرة المسموحة هي الانتقالات السائدة وان قيمة فجوة الطاقة تتراوح بين 3.1 - 2.7)eV) وتم حساب بعض الثوابت البصرية والتي شملت معامل الانكسار ومعامل الخمود. اظهرت قياسات (تيار - فولتية) تحسن ملحوظا في كفاءة الخلية الشمسية بعد الطلاء بغشاء SnO2 كقطب توصيل.تزداد كفاءة الخلية الشمسية مع زيادة تركيز الغشاء حيث كانت اعلى كفاءة 16.43% عند السمك (100) nm و15.97% عند السمك (90)nm . | Nanostructure SnO2 thin films have been prepared by the thermal - chemical technique for (SnCl2.2H2O) watery tin chloride solution in(0.05)M concentration at constant temperature and different thickness on two kinds of substrates ,first type the glass substrate for the study optical and structural properties of the films ,while the second type was silicon solar cell of p - n junction to study the effect of the films as electrode on the efficiency of solar cell. From the diffraction of X - Ray it was appear that the films has poly crystalline and directionality is prevalent in (110,101,211).Through the study of the transmittance and absorbance as a function of wavelength shows that the films have high transmittance in spectrum regional (600 - 900)nm and that is make it ready to use as anti - reflection electrode. Transmittance is increasing while the thickness is reduced,reflectance and absorbance curve act in opposite direction to the transmittance curve. The study of electron transition shown that all the electron transition is happened and through the study of the values of absorbant coefficient shown that the allowed direct electronic transitions is the prevalent transition, and the value of energy gap is (2.7 - 3.1 ) eV. Also optical constant like refractive index (n) and extinction coefficient (ko) have been calculated. The efficiency of solar cell increased with the increased the thickness of the films, maximum efficiency of the solar cell is 16.43% corresponding to (100)nm and 15.97% corresponding to (90)nm

تشخيص ورم الكبد من الصور المقطعية باستخدام معالجة الصور الرقمية == Diagnosis of Liver Tumor from Computed Tomography Images using Digital Image Processing

اسم المؤلف: انتظار مالك هادي
اسم المشرف: علياء حسين علي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: معالجة الصور
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: This work aims to detect and diagnoses liver tumors from Computed Tomography images using digital image processing, this is a modern technique which depends on using computer in addition to textural analysis to obtain an accurate liver diagnosis, despite the method's difficulty that came from liver's position in the abdomen among the other organs. This method will enable the surgeon to detect the tumor and then easing treatment also it helps physicians and radiologists to identify the affected parts of the liver in order to protect the normal parts as much as possible from exposure to radiation. This work describes a new 2D liver segmentation method for purpose of segmented as a treatment for liver tumors. Liver segmentation is not only the key process for volume computation but also fundamental for further processing to get more anatomy information for individual patient. Due to the low contrast, blurred edges, large variability in shape and complex context with clutter features surrounding the liver that characterize the CT liver images. The method has been implemented in MATLAB and a Graphical User Interface was created. These imaging studies have contained a total of 22 CT images, including five Haemangioma, five Cyst, five Cirrhosis, five carcinomas and two healthy livers. Calculating the area of the abnormal part (tumor), an algorithm has been created to colored images depending on the boundary. The images have been transformed from RGB color space to HSV color space to identifying different colors in fabric by analyzing the HSV color space. This helps to separate abnormal part in to K - clusters. The method is very effective and gives the best result for classification process. Since it depend on the color of the texture and on the distance between the classes. The 2D segmentation process which is based on the hybrid method which is the combination of modified k - Mean (which depend on the distance and color), and the statistical structure which is the first order statistical feature. The statistical features are : Mean, Variance, Standard deviation, Skewness, Kurtosis, Energy and Entropy, and the geometrical feature which are area and the irregularity. These features together helps to diagnose the liver tumor and to classify these tumor

دراسة نظرية لليزر الليف البصري المطعم بالنديميوم == Theoretical Study for Neodymium - Doped Optical Fiber Laser

اسم المؤلف: امجد عبد الحميد سلمان
اسم المشرف: مظهر شهاب احمد
الموضوع العام: علوم الفيزياء
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: to find equation of lasing output power (Pout) by using the numerical emulation Secondly, calculating the (Pout) of Nd+3 - doped optical fiber laser as a typical example for the optical fiber laser, which is process according to this system. The required equations to calculate (Pout) was programmed by Matlab program (version8.1). Two types of hosts were used in this simulation, the first type is Silica with four designs using commonly in the above mentioned, the four designs are Lycom (a), Lycom (b), York and IVA with lasing emission at the wavelengths (1064×10 - 9m) and (1331×10 - 9m). The second type of hosts is ZBLAN with only one design is Le Verre fluore, with lasing emission at two wavelengths (1048×10 - 9m) and (1317×10 - 9m). The first step in this emulation was determining the value of numerical aperture (NA) for each design of special designs and at the special wavelengths for every host, which can obtain the highest values of lasing output power (Pout) and efficiency (η) at value of (NA).The second step was calculating the (Pout) corresponding to pump power (Po) for each host according to the designs and the wavelengths related to the host, In case of the host Silica, for the two wavelengths of this host, it is found that the (Pout) was the highest value when the design (York) was used, while in case of the host (ZBLAN), it is found the highest value of (Pout) is when using the wavelength (1048×10 - 9m). For addition that, it is found that to obtain the highest values of (Pout) and (η) for this type of laser, it must be use the host Silica at the wavelength (1048×10 - 9m). According to that, the third step was using this host and this wavelength to calculate the effect of the numerical aperture (NA), core radius (a), cladding radius (b), fiber length (L),reflection coefficients (R2), Nd+3 - dopant concentration in the core (No), lifetime of upper laser level (T2) and pump power (Po) on the (Pout). The changing of the above mentioned coefficients values was determinate with its range which is finding in four designs related to the host Silica. It is found that the value of (Pout) decreased with the increase of the values of (NA, a, b, L and No), while increase with the increase of the values of (R2 ,T2 and Po), through that, the optimal values of these coefficients which must be used to obtain the highest values of (Pout) and (η) for this type of laser.

دراسة تاثير البلازما غير الحرارية على الخصائص التركيبية والبصرية لاغشية SnO2

اسم المؤلف: الاء خميس برد علوان
اسم المشرف: حامد حافظ مربط
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الدراسة تم استخدام منظومة بلازما الحاجز العازل (DBD _system) لدراسة تاثير البلازما غير الحرارية في الخصائص التركيبية والبصرية لاغشية اوكسيد القصدير SnO2 المحضرة بطريقة الرش الكيميائي الحراري, تتكون هذه المنظومة من قطبين مصنوعين من النحاس محاطين بمادة عازلة من التفلون , يربط قطبا المنظومة الى طرفي محولة عالية الفولتية متغيرة (1 - 15) كيلو فولت ,وتعمل بفولتية ادخال 220 فولت وذات تردد 50 هيرتز وفولتية اخراج 15 كيلو فولت . تم تحضير اغشية ثنائي اوكسيد القصدير (SnO2) الرقيقة بطريقة الرش الكيميائي الحراري ذات سمك mμ 0.725 من خلال رش محلول مكون من كلوريدات القصدير المائية (SnCl4. 5H2O) المذابة في الماء المقطر بتركيز 0.1M وعلى قواعد زجاجية بدرجة حرارة 450˚C . تم تشخيص الخصائص التركيبية للاغشية من خلال دراسة نمط حيود الاشعة السينية (XRD) .اذ اظهرت النتائج ان اغشية ثنائي اوكسيد القصدير ذات تر كيب متعدد التبلور ومن النوع الرباعي مع هيمنة الاتجاه (110) . ووجد ان هذا التركيب لم يتاثر بالبلازما غير الحرارية اي انه لم يلاحظ اي تغير في الخواص التركيبية للغشاء حين عرضت الاغشية المحضرة لبلازما غير الحرارية المنتجة من منظومة الحاجز العازل ولازمان مختلفة (10,8,6,4,2) دقيقة وكذلك تم دراسة علم التشكل وخشونة السطح للاغشية المحضرة في بحثنا هذا سجلت صور سطح التشكل بواسطة جهاز AFM وقد وجد ان هناك تباين في قيم الحجم الحبيبي حيث انها تتغير مع زيادة زمن التعريض للبلازما .تمت دراسة الخواص البصرية للاغشية المحضرة من خلال تسجيل طيف النفاذية ، ولمدى الاطوال الموجية (300 - 1100)nm، كما وجد ان الانتقالات الالكترونية عند حافة الامتصاص الاساسية كانت من النوع المباشر المسموح. ولوحظ ايضا تباين في قيم فجوة الطاقة حيث انها تتغير مع زيادة زمن التعريض للبلازما . كما استعمل طيف النفاذية في ايجاد الانعكاسية والامتصاصية ومعامل الامتصاص والثوابت البصرية المتضمنة معامل الانكسار، ومعامل الخمود، والجزء الحقيقي والخيالي لثابت العزل وكذلك ايجاد التوصيلية البصرية .وجد بان كل من الامتصاصية ومعامل الامتصاص ومعامل الخمود والجزء الخيالي من ثابت العزل والتوصيلية البصرية تزداد مع زيادة زمن التعريض للبلازما, بينما تقل كل من النفاذية والانعكاسية والجزء الحقيقي من ثابت العزل ومعامل الانكسار مع زيادة زمن التعريض للبلازما | In this study, the use of plasma dielectric barrier system (DBD _system) to study the non - thermal plasma effect on the structural and optical properties of tin oxide SnO2 films prepared by Chemical Spray pyrolysis , this system consists of two electrodes Mades of copper surrounded by insulating material Teflon, connects the pole system to both ends of a converted high - voltage variable (1 - 15) kV, type (Ac) and change voltages beyond the converted (voltage introduction of 220 volts, frequency 50 Hz, and the voltage output of 15 kV) by changing the input voltage it by linking it to equipped voltage alternating variable (0 - 220) volts. Tin oxide (SnO2) thin films were prepared by Chemical Spray pyrolysis way through a Solution spray consisting of tin chlorides water (SnCl4. 5H2O) dissolved in distilled water concentration (0.1M) and the rules on a glass 450˚C degree heat. It was diagnosed with structural properties of the films through the study of X - ray diffraction pattern (XRD) . As the results show that the tin oxide films binary tree with multi - Cape gelling and It is kind quartet with the dominance of direction (110) . It was found that this installation was not affected by any non - thermal plasma that not noticed any change in the structural properties of the films. Films prepared Offered to non - thermal plasma producer from dielectric barrier system and different times (0,2,4,6,8,10) minutes and The atomic force microscope (AFM) images shows that the (Roughness Average, Average Diameter and the square root of the average roughness square (RMS)) all of the film (SnO2) decreased and increase with increase Time exposure to Non - Thermal Plasma . Optical Properties for films prepared were studied by recording the spectral transmittance and absorbance, to the extent wavelengths (300 - 900) nm, also found that the electronic transfer at the edge of the fundamental absorption was one of the allowed direct kind. It was also noted an increase and decrease in the value of the energy gap with increasing time of exposure to plasma. Absorbance and Transmtion spectra have also been used to find the reflective optical constants included refractive index, and the coefficient of Extinction, the real and the imaginary part of the dielectric constant and optical connectivity. Found that all of the absorbance , the coefficient of absorption , Extinction coefficient , the imaginary part of the dielectric constant and optical conductivity increases with increasing exposure to plasma time, while at least each of the transmittance , reflectivity ,real part of the dielectric constant and the refractive index decreases with an increased exposure to plasma time

دراسة تاثير معقداث معدنية على الخواص البصرية والكهربائية وفوق السمعية لاغشية بولي فينيل الكحول وبولي فينيل استيت المحضرة بطريقة الصب == Studying the Effect of Metal Complexes on the Optical, Electrical and Ultrasound Properties of PVA and PVAc Films Prepared by Casting Method

اسم المؤلف: الاء جواد كاظم الكدساوي
اسم المشرف: ندى خضير عباس | مجيد علي حبيب
الموضوع العام: علوم الفيزياء
السنة: 2005
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The present study focused on the modification of the structural, optical and electrical properties and acoustical parameters of poly (vinyl alcohol), poly (vinyl acetate) and polyblend of (poly (vinyl alcohol) + poly (vinyl acetate)) by adding (0, 3, 6 and 9) wt.% of metal complexes, which are : Chloropentaaminecobalt (III) chloride [Co(NH3)5Cl]Cl2 and Potassium Dioxalatocuprate (II) Dihydrate K2[Cu(C2O4)2].2H2O. The mentioned composites films were prepared by solvent casting technique.All samples were structurally investigated by X - ray Diffraction XRD, Fourier transform infrared spectroscopy FTIR, Scanning electron microscope SEM which revealed that there is an association between the polymer matrix and the additive.The optical data at wavelengths range (190 - 800) nm, were analyzed and interpreted in term of the theory of phonon assisted indirect electronic transition. It is observed that energy gap decreases as the metal complexes content increases. The smallest obtained energy gap is 1.86 eV for PVAc / [Co(NH3)5Cl]Cl2 composites films. The refractive index, extinction coefficient, and the dielectric constant increase with increasing the concentration of the additive.The D.C electrical conductivity increases with temperature which exhibited a semiconductor behavior. Also the activation energy values are decreases with increase of additive concentration.The A.C electrical conductivity is increased with increasing applied electrical field frequency (102 to 5*106) Hz and with additive concentration. The dielectric constant and dielectric loss were decrease with increasing the frequency and increase with the concentration of the additive.The acoustical parameters have been measured in frequency range of (25, 30, 35 and 40) KHz. Metal complex enhances the ultrasonic absorption coefficient of polymer matrix. The velocity decreases with increasing metal complex.

تصنيع ودراسة الخصائص البصرية والكهربائية لاغشية CdSe/Si كخلايا شمسية باستخدام تقنية البلازما == Fabrication and Study Optical and Electrical Properties of CdSe/Si Films As a Solar Cells Using Plasma Technique

اسم المؤلف: ولاء مراد علي رضا
اسم المشرف: حامد حافظ مربط | كاظم عبد الواحد عادم
الموضوع العام: علوم الفيزياء
السنة: 2013
الموضوع الدقيق: فيزياء البلازما
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذه الدراسة تصنيع الخلية الشمسية (CdSe/Si) بتقنية الترذيذ ذي التيار المستمر وذلك بترسيب اغشية رقيقة من سيلنيوم الكادميوم على رقائق من السليكون بسمك مختلف nm(300,400,500) وبزمن ترذيذ مختلف(30,45,60) min ومسافة بين الاقطاب 4cm تحت ضغط فراغي 10 - 5 ملي بار ثم لدنت الاغشية بدرجات حرارة مختلفة K (348,373,423). تم ايضا دراسة تاثير ضغط الاركون اعلى خصائص البلازما والتي تتضمن : درجة حرارة الالكترونTe, كثافة الالكترونات ne وكثافة الايونات ni حيث جرى قياسها تحت ضغوط مختلفة من غازالاركون.لقد وجد ان درجة حرارة الالكترون تقل بزيادة ضغط غاز الاركون وان كثافة الالكترونات تزداد بزيادة ضغط الغازوان سلوك كثافة الايونات مشابه لسلوك كثافة الالكترونات ولكن بقيمة اعلى. ثم تم دراسة الخواص التركيبية للاغشية المحضرة على ارضيات زجاجية بواسطة حيود الاشعة السينية ,(XRD)وقداظهرت نتائج XRD ان الغشاء بسمك nm300 قبل التلدين كانت عشوائية ويزداد التبلور لجميع الاغشية عند زيادة التلدين ليصبح متعدد التبلور . درست الخصائص البصرية لاغشية سيلنيوم الكادميوم المحضرة على ارضيات زجاجية بسمك مختلف قبل وبعد التلدين من خلال قياس طيفي النفاذية والامتصاصية كدالة للطول الموجي وكانت نتائج النفاذية عالية جدا مما جعلها ملائمة لتطبيقات الخلايا الشمسية حيث تبين ان النفاذية تزداد بزيادة درجات حرارة التلدين وتقل بزيادة السمك , وان الامتصاصية تقل بزيادة درجات حرارة التلدين وتزداد بزيادة السمك عند الاطوال الموجية القصيرة. ولوحظ ان معامل الامتصاص البصري لاغشية سليلنيوم الكادميوم يقل تدريجيا بزيادة الطول الموجي ودرجات الحرارة والسمك وان قيم معامل الامتصاص التي تم الحصول عليها هي اعلى من (cm - 1 104) مما يؤكد ان الانتقال هومن النوع المباشر . كما تم حساب فجوة الطاقة البصرية لسمك مختلف وتبين ان فجوة الطاقة تزداد بزيادة درجة الحرارة وتقل بزيادة السمك وكذلك حسبت الثوابت البصرية المتضمنة معامل الانكسار ومعامل الخمود وثابت العزل بجزئيه الحقيقي والخيالي كدالة للطول الموجي . وكذلك تم دراسة الخصائص الفوتوفولتائية المتضمنة قياس (سعة - جهد) للمدى Volt (0 - 1) عند تردد ثابت مقداره kHz (200) وتم من خلال هذه القياسات معرفة نوع المفرق الهجيني للخلية الشمسية (CdSe/Si) وتبين انه من النوع الحاد . وتم حساب جهد البناء الداخلي وقد لوحظ ان جهد البناء الداخلي يزداد بزيادة درجة حرارة التلدين والسمك وتم كذلك حساب عرض منطقة النضوب ووجد انها تقل بزيادة درجات حرارة التلدين وتزداد بزيادة السمك وكذلك لاحظنا ان السعة تقل بزيادة فولتية الانحياز العكسي , وايضا تقل بزيادة السمك لكن السعة تزداد بزيادة درجة حرارة التلدين . وعند قياس تيار - فولتية تحت ظروف الاضاءة للخلية الشمسية وجدنا ان كفاءة الخلية الشمسية(η) تزداد قيمهما بزيادة السمك وبزيادة درجة حرارة التلدين من 2.2 الى3.1ومن 2.2الى6.5 على التوالي وقد فسر سبب ذلك بوجود تغير في تركيب الاغشية وكذلك تحسن طبقة التداخل بين n - CdSe وp - Si.وحسبت كفاءة الخلية الشمسية وكانت افضل كفاءة (6.5%) عند سمك nm (500) ودرجة حرارة تلدين K (423) وشدة اضاءة mW/cm2 (69). | In this study , a solar cell (CdSe/Si) by DC Planar Sputtering Technique has been manufactured . CdSe films have been deposited on wafer of silicon prepared with different thicknesses (300,400 and 500) nm at different sputtering time equal to(30,45 and 60) min and distance is equal to 4cm under vacuum of 10 - 5 mbar and different annealing temperature (348,373 and 423) K .The effect of Argon gas pressures on plasma characterizations were studied such as : electron temperature Te, electrons density ne, ions density ni under different Argon gas pressures. It has been found that the electron temperature decreases with increasing Argon gas pressure. The electron density was found to increase with increasing argon gas pressure .The behavior of ions density was similar to that of the electrons, but their value was higher. The structural characteristic of the CdSe films prepared on glass substrates has been studied by using X - ray diffraction. The tests showed that all these films are polycrystalline, and their the structures, transformed to crystalline when the annealing temperature Ta increased . Optical properties of cadmium selenide films with different thicknesses are prepared on glass substrate are studied before and after annealing by measuring their spectral transmittance and absorbance as a function of wavelength. The results of the transmittance is very high, making it suitable for applications of solar cells. It was found that the transmittance increases with increasing of annealing temperature and decreases with increasing of thickness. It was found also that the absorbance decrease with increasing of annealing temperature and increases with increasing thickness at short wavelengths. It was noticed that the absorption coefficient of cadmium selenide gradually decrease with increasing of wavelength and annealing temperature, but decreases with increasing thickness. The value of absorption coefficient is greater than 104 cm - 1 , which refers to direct transition kind . Optical energy gaps of CdSe films were calculated for different thicknesses respectively. The energy gap increases with increasing temperature and decreases with increasing of thickness .The optical constants, refractive index , extinction coefficient and dielectric constant ( real and imaginary parts) as a function of wavelength were calculated as well .It was also studied the electrical and photovoltaic characteristics of these films including the measurement of the (capacity - voltage) at bias voltage (0 - 1) volt at constant frequency of (200) kHz. We observed that the type of heterojunction solar cell (CdSe/Si) was abrupt. Also we calculated the built - in potential and noticed that its values increase with increasing of annealing temperature and thickness. We also calculated the width of the depletion region and we found its values decrease with increasing of annealing temperature and increases with increasing thickness . It also noticed that the capacity decrease with increasing reverse bias voltage, and thickness but increases with increasing of annealing temperatures. The current - voltage characterization under illumination it was found that the efficiency (η) increase with increasing of the thickness and annealing temperatures from 2.2 to 3.1 and from 2.2 to 6.5 respectively , while increase with increasing of annealing temperatures due to the existence of change in the structure of films and the improve in the interface layer between n - CdSe and p - Si. The efficiency of the cell was calculated and its best value was (6.5%) at thickness (500) nm, annealing temperature (423)K and intensity of illumination (69 mW/cm2) .

حساب الحاصل النيوتروني للتفاعلات (?,n) و(p,n) لبعض النوى المتوسطة لمدى طاقي (50 - 100 MeV) باعتماد المعادلات شبه التجريبية == Neutron Yield Calculations for (?,n) and (p,n) reactions for Some Intermediate Nuclides in the Energy rang (50 - 100MeV)by using Semi - empirical formula

اسم المؤلف: اسيل عادل يوسف
اسم المشرف: خالد هادي مهدي العبيدي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ان اغلب المقاطع العرضية لاغلب النظائر المشعة تكون مفقودة عند طاقات معينه في المختبرات العالمية ، لذا تم استخراج مجموعة صيغ رياضية شبه تجريبية موحدة لحساب الحاصل النيوتروني بالاعتماد على العدد الكتلي للنظير وطاقة القذيفة ، اما طاقة منفردة او مدى من الطاقات . تم العمل على جمع بيانات المقاطع العرضية مقابل الطاقات للمدى (50 - 100 MeV)من المختبرات العالمية (Koning , A . J . ; TENDL - 2010 - 2012) لنوعين من التفاعل (α,n) و(p,n) مع نظائر اربعة عناصر( 33As, Fe26 , Mn25 ، (32Geلكل عنصر عشرة نظائر فيصبح مجموع التفاعلات اربعين تفاعل كما تم حساب قدرة الايقاف للبروتون ولجسيمة الفا بوساطة برنامج (SRIM - program - 2013)، ومن ثم حساب الحاصل النيتروني باستخدام برنامج (الماتلاب2008a)، وهو مصمم لهذا الغرض ، تم حساب طاقة اللاتناظر لكل نظير ومن ثم استخراج صيغ رياضية من خلال افضل عملية ملائمة (fitting) بين طاقة اللاتناظر والحاصل النيوتروني للتفاعل عند الطاقات (50,60,70,80,90,100 MeV) لاهداف نوى متوسطة مختلفة . وضعت المعلمات الاولية المستخرجة من الصيغ الرياضية في جداول ، ورسمت العلاقة بين كل مجموعة معلمات والطاقة المقابلة لها لغرض استخراج معادلات موحدة ، والتي من خلالها تم ادخال متغير الطاقة في المعادلة الاساسية المستخرجة ، وبعد رسم العلاقات وجدنا المقاطع العرضية للتفاعل (α,n) اصغر من التفاعل (p,n) ، وان الحاصل النيوتروني يزداد مع زيادة طاقة الجسيم الساقط وتناقص العدد الكتلي ، وان النتائج المحصلة من الصيغ الرياضية الجديدة المعتمدة على القيم العملية في تطابق جيد مع النتائج النظرية المنشورة . | cross sections for many reactions for most of isotopes with different energies in international laboratories were missed so we get a mathematical semi - empirical equations for calculating the neutron yield depending on mass number of target and projectile energy (single enrgy or range of energy ) . Data of cross sections were collected from international libraries (TENDL,Kong) from 2010 to 2012 for tow types of reaction (α,n) and (p,n) for energies (50 - 100MeV) with ten isotopes of (33As , 26Fe , 25Mn , 32Ge) elements , that is mean the total number of reaction will [40] reaction , then stopping power for proton and alpha particle were uese calculated using SRIM program 2013 then neutron yield was calculation using Matlab program 2008a designed for this purpose so as asymmetry energy for each isotope then by fitting relation of asymmetry energy with neutron yield for, the reaction at energies (50,60,70,80,90,100) MeV with intermediate nuclide we get . The parameters were tables and from their relations with energy we get final set of semi - empirical equations, then it was drown , we from this fingers we concluded that the cross sections for (α,n) reactions were less than (p,n) reactions and the neutron yield in cress with increasing the projectile energies and with decreasing of atomic number all the results that got from this new semi - empirical equations that we got from experiment data was in good agreements with published the data .

الخواص التركيبية والكهربائية لاغشية Bi2 (Te1 - x Sex) 3 الرقيقة == Structural and electrical properties of Bi2 (Te 1 - x Se x) 3 thin films

اسم المؤلف: هديل فاضل حسين عمران
اسم المشرف: اخلاص هميم شلال
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الاغشية الرقيقة
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم تحضير عينات لسبائك Bi2(Te1 - xSex)3بنسب مختلفة من محتوى (x=0,0.1,0.3,0.5,0.7,0.9,and 1.0) Se ,وحضرت الاغشية الرقيقة باستخدام منظومة التبخير الحراري على قواعد من مادة الزجاج وعند ضغط واطئ ( (10 - 5 تور وبمعدل ترسيب (12) نانومتر بالدقيقة عند درجة حرارة الغرفة وبسمك ثابت مقداره (450±30) نانومتر. تم التحقق من تراكيز كل من العناصر المكونة للسبائك البزموث والتيلريوم والسلينيوم من خلال الفحص بجهاز فلورة الاشعة السينية حيث تعتمد هذه التقنية على القيم القياسية لهذه العناصر .وذلك للتاكد من ان السبائك Bi2(Te1 - xSex)3 هي ذات نقاوة جيدة. اظهرت قياسات حيود الاشعة السينية لسبائك واغشيةBi2(Te1 - xSex)3 بانها تمتلك تركيب متعدد التبلور بالمنشور السداسي المنتظم، بمجموعة الفضاء R3m، مع التوجيه القوي للسطح (015). لوحظ ان هناك قمم حيود اضافية، تتوافق مع الانعكاسات عن السطوح البلورية ، (006) و(0015)، نلاحظ ان هناك العديد من الانعكاسات عن السطوح البلورية( 015) (006)، (1010) وانعكاس قوي وحاد عن السطح (015) ، وهذا يعني ان جميع الاغشية ذات تركيب جيد على طول المستوى (015) بشدات مختلفة لكل غشاء رقيق وكما اظهرت قياسات بجهاز AFM او مورفولوجية السطح للاغشية Bi2(Te1 - xSex)3 ان هناك زيادة في حجم الحبيبة ومتوسط خشونة السطح مع زيادة نسبة (x). اظهرت قياسات التوصيلية الكهربائية المستمرة وجود طاقتي للتنشيط، وبالتالي ظهور اليتين للنقل للحاملات في الاغشيةBi2(Te1 - xSex)3الرقيقة ولجميع مديات درجات الحرارة , حيث ان الطاقة التنشيط الاولى (Ea1) تحدث في درجة الحرارة المنخفضة للمدى (323 - 383) K في حين ان طاقة التنشيط الثانية (Ea2) تحدث في درجة الحرارة المرتفعة للمدى (383 - 433). تشير نتائج قياسات تاثير هول ان جميع الاغشية الرقيقة ولجميع قيم x تمتلك توصيلية كهربائية من النوع p والتي تتطابق مع توصيلية المركبات الاصلية Bi2Te3 وBi2Se3 مما يعني عدم وجود انحراف في نسبة السلينيوم Se / او التليريوم Te في السبائك المصنعة، حيث ان هذا الانحراف يؤدي الى تغيير نوع التوصيلية في الاغشية الرقيقة لBi2(Te1 - xSex)3. تقل تراكيز حاملات الشحنة مع ارتفاع نسبة Se للاغشية الرقيقة Bi2(Te1 - xSex)3، من القيمة 2.32*1019cm - 3)) عند x=0 الى القيمة) ( 9.40*1017cm - 3 عند x=1 , في حين اظهرت حركية هول μH سلوكا مغايرا حيث تزداد مع زيادة نسبة السلينيوم Se في الاغشية الرقيقة Bi2(Te1 - xSex)3 من 3.51*10 - 1 cm2/V.s) ) الى القيمة 7.54 cm2/V.s) ) عند تغير قيم x من (0) الى (1) على التوالي. تم قياس الخصائص الكهروحرارية للاغشية الرقيقة Bi2(Te1 - xSex)3 للمدى الحراري من K ( 383 - 433) , حيث ان قيم معامل سيباك ، تنخفض مع زيادة نسبة Se لجميع العينات للاغشية الرقيقة Bi2(Te1 - xSex)3، بينما انخفض معامل القدرة مع زيادة نسبة السلينيوم Se في الاغشية الرقيقة Bi2(Te1 - xSex)3. التوصلية الحرارية Kel للاغشية الرقيقة Bi2(Te1 - xSex)3 كما تم ترسيبها , تنخفض بشكل ملحوظ مع زيادة نسبة Se, من القيمة (1.031*10 - 5 ( w/cm.k)) الى القيمة 8.96*10 - 6 ) (w/cm.k))) اخيرا وجدنا ان هذا العامل (ZT) يقل مع زيادة نسبة (Se) في الاغشية الرقيقة Bi2(Te1 - xSex)3, من (0.704) الى القيمة(0.129) عند عند تغير قيم x من (0) الى (1) على التوالي. | The Bi2(Te1 - x Sex)3 alloys with different values of the percentage of Se (x=0,0.1,0.3,0.5,0.7,0.9 and 1)have been prepared, Thinfilms of these alloys were prepared using thermal evaporation technique under vacuum of (10 - 5 ) Torr on glass substrates, at room temperature with deposition rate (12nm/min) with constant thickness (450±30 nm). The concentrations of Bi, Se and Te in the Bi2(Te1 - x Sex)3 alloys were identified by X - ray Fluorescence (XRF) technique , to be ensure that they are in good stoichiometric percentage in the Bi2(Te1 - x Sex)3 alloys. The X - ray diffraction measurements for bulk and thin films of Bi2(Te1 - xSex)3 indicate the polycrystalline structure with rohmbohedral structure, with space group R3m, and with a strong (015) preferred orientation. and it can be noticed that there are additional peaks, (0015) and (006 ) reflections planes, which is meaning that all films present a very good texture along the (015) plane axis, different intensities for each thin film. AFM measurements or The surface morphology for the thin films of Bi2(Te1 - x Sex)3,show that the average crystallite size and the average surface roughness increasing with increasing of the percentage Se(x). The D.C measurements showed two stages of activation energy and hence two transport mechanisms for thin films under study, in the temperature range, (Ea1) occurs within range (323 - 383)K , while (Ea2) within range (383 - 433) K. The values of Ea1 increase from (0.0066627at x=0 - 0.0073361 at x=1) eV The values of Ea2 increase from (0.011 - 0.013) eV The results Hall Effect measurements show that all thin films have p - type conductivity and that coincide with the original compounds Bi2Te3 and Bi2Se3, indicating there is no deviation in the percentage of Se and/or Te in our fabricated alloys, then this will be changing the type of thin films conductivity. The carrier concentrations of charge carriers nH decrease with increasing of Se percentage, from (2.32*1019cm - 3 ) at x=0 to(9.40*1017cm - 3 ) at x=1, while the mobility μH showed opposite manner which increases with increasing of Se percentage from (3.51*10 - 1 cm2/V.s) when x=0 to (7.54cm2/V.s) at x=1. Thermoelectric properties of Bi 2 (Te 1 - X Se X) 3 thinfilm were measured from (383 K to 433 K) The values of Seebeck coefficient, decreases as increasing of Se percentage in all samples of Bi 2 (Te 1 - X Se X) 3 thinfilm, while the power factor was decrease when we increase the (Se) percentage in Bi 2 (Te 1 - X Se X) 3 thinfilm. Thermal conductivity Kel for the as deposited Bi2(Te1 - x Se x)3 thinfilm, decreases sharply by increasing Se percentage from (1.03*10 - 5 w/cm.k).to (8.95*10 - 6 w/cm.k) .Finally we found that the figure of Merit (ZT) decreases by increasing (Se) percentage for all investigated Bi2(Te1 - xSex)3 thin films, from (0.704) at x= 0 to (0.129) at x=1.

قياس جودة صور سرطان الثدي باستخدام عمليات التشكيل الرياضي == Quality Measurement of Brest Cancer Image Using Morphological Operations

اسم المؤلف: اريان عبد النبي كريم
اسم المشرف: امل حسين عباس
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: معالجة الصور
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تستعمل الصورة الطبية لدراسة وتحليل وتشخيص الامراض , اذ تحتل اهمية ومساحة قصوى لدى الباحثين , وزاد هذا الاهتمام في العراق بالسنوات الاخيرة بسبب الظروف الحربية التي مرت به مما ادى الى ظهور حالات مرضية اكثر من السابق, ومن اهم هذه الامراض التي ظهرت وشاعت بين النساء هو مرض سرطان الثدي , اذ تبرز هنا اهمية صور التصوير الشعاعي للثدي ( Mammography ) كعامل مساعد في التشخيص الاولي, اذ اخذ حيزا كبيرا لدى الباحثين في دراسة كيفية مساعدة المختصين للكشف عن الاورام وتحديدها من خلال هذه الصور, والاستفاده من تقنيات معالجة الصور الرقمية في التصنيف, والتجزئة, وتحليل المناطق, ودراسة تطابقها واستعمال تقنيات التشكيل في ابراز جوانب معينة .يتضمن العمل تجميع مجموعة من صور التصوير الشعاعي للثدي من ثلاث مستشفيات )مستشفى مدينة الطب والكندي في بغداد ومستشفى ازادي في كركوك (ثم دراسة ثلاث حالات مختلفة من الاصابة من حيث حجم الاورام ونوعها ودرجة انتشارها في الثدي, وتم اقتراح مجموعة من الخوارزميات لغرض معالجة الصور الرقمية وتحديد الاورام عن طريق معالجة اولية للصور وتحديد المناطق المهمة بتطبيق عمليات التشكل(Morphology Operation) باستعمال مجموعة مختلفة من عناصر الهياكل(Structure Elements ) باحجام ونوافذ مختلفة والمفاضلة بين افضل نوع من عنصر الهيكلي المستخدم للصور باستعمال مجموعة من المعايير الرقمية التي تهتم بقياس جودة الصور , الحقناه بتنعيم الصور الناتجة بمرشحات تحسين متعددة مثل مرشح كاوس ومرشح المعدل , توصلنا الى ان نافذة (15×15) اعطتنا نتائج افضل من النوافذ الاخرى وان عنصر الهيكل الكروي (ball) ذو نتائج متميزة وذلك لمطابقته شكل الورم في الثدي , وان استخدام التشكيل الرياضي يعطي صور اوضح لمنطقة الورم في الثدي من خلال تطبيق الخوارزمية في المعالجة الاولية للصور | Medical image is a kind of digital image used to study, analyze and diagnose diseases. Therefore, it has obtained a maximal significance and interest by researchers. In Iraq, such an interest has increased within the last years, because of war conditions through which Iraq has gone, that caused the increasing rates of disease cases more than ever. One of the most common and wide spread diseases among women has been breast cancer. In this regard, the significance of mammography becomes prominent, as an auxiliary method for primary diagnosis, so, this method has got a great deal of consideration by researchers to help specialists to find tumors and determine their types via these images. In addition, these images are useful in categorizing, deconstructing and analyzing the areas to study certain aspects of tumors via morphological techniques. In our thesis a collection of Mammography images of infected breasts has been picked up from three hospitals; Two in Baghdad, Medicalcity and Al - Kindy Hospital, and the third in Kerkuk, Azady Hospital. In this way, three cases of breasts tumors have been studied, with regard to their sizes, types and level of infections. Then, some algorithms have been suggested to tackle the digital images, and in order to determine the tumors through morphological operations in which various types, sizes and windows of structure elements are used to differentiate between the best structure elements used in the images, by working on digital measures related the quality of the images. Moreover, it was followed by improving the images with various filters; such a Gaussian Filter and Mean Filter, So we reached that the window (15×15) in has given us better results than the rest of them, as well as that the element of ball structure has distinguished results, due to its matching to the shape of the breast tumor. In addition, using the mathematical morphology produces clearer images of the tumor in the breast through applying the algorithms in the primary handling of the images

عدد الالكترونات المؤثرة ل DNA والماء السائل == Effective Number of Electron of DNA and Liquid Water

اسم المؤلف: احمد محمد عبد الاسدي
اسم المشرف: خالد عبد الوهاب احمد
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: فيزياء الالكترونيات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The effective number of electrons for DNA and liquid water which is a function to the energy that contributes in the excitations of the target using the dielectric formalism was calculated in present work and we found the maximum value of (???????????????? ≈ 205) for DNA and (???????????????? ≈ 6) for ????2???? when the transferred energy is about 100 ????????. The electronic response of DNA and liquid water is described by the MELF - GOS model, in which the outer electron excitations of the target are accounted by Mermin - type energy loss function, whereas the inner - shell electron excitations are modeled by the generalized oscillator strengths of the constituent atoms. The probability of energy loss per unit path length has been calculated as a function of charge fraction (q) (ionization fraction) at different incident protons energy (T???? = 0.05 , 0.25 , 1 , 2 , 2.5 MeV/u) for DNA and liquid water. Also the partial stopping power effective charge ????(????) (PSPEC), stopping cross - section ????(????), the average energy transferred E (T) which found for DNA at highest energy ≈ 76.5 eV and for liquid water ≈ 75 ????????, and the mean ionization potential ????(????) were calculated and we obtained (???? ≈ 80 ????????) for DNA and (???? ≈ 79 ????????) for ????2???? when (ħ???? → ∞). Good agreement achieved with a previous work. The mathematical equations have been programmed by writing a Fortran - 90 program for numerical calculations.

تحديد حجم الجسيمة وانفعال الشبيكة من خلال تحليل توسيع الذروة لحيود الاشعة السينية لجسيمات اوكسيد الزنك النانوية == Restriction of Particle Size and Lattice Strain through X_Ray Diffraction Peak Broadening Analysis of Zinc Oxide Nano_Particles

اسم المؤلف: احمد علاء احسان
اسم المشرف: خالد هلال حربي
الموضوع العام: علوم الفيزياء
السنة: 2016
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الدراسة تم تحديد حجم البلرة وانفعال الشبيكة لجسيمات اوكسيد الزنك النانوية باستخدام طريقتي التباين والعرض المتكامل ، واستخدمت ايضا بعض الطرق الاخرى مثل شيرر ويليامسون - هال لحساب المعلمات اعلاه. ثم تحسب كثافة الانخلاع ، مساحة السطح ودرست سلوك حجم البلرة انفعال الشبيكة مع درجات حرارة مختلفة باستخدام طريقة التباين. تم في هذه الدراسة تطوير طريقة التباين من خلال تقديم ثلاثة نماذج جديدة هي نموذج التباين التشوه المتماثل (UDVM),نموذج التباين اجهاد التشوه المتماثل (UDSVM) ونموذج التباين كثافة الطاقة التشوه المتماثل (UDEDVM) لتحديد المعلمات الشبيكة مثل حجم البلرة ، انفعال الشبيكة ، والاجهاد، وكثافة الطاقة للمرة الاولى. في طريقة التباين حسبنا قيم حجم البلرة ومربع متوسط الانفعال هي (22.276 nm) و(0.133473 x 10 - 3) على التوالي, ثم حسبنا قيم حجم البلرة وانفعال الشبيكة هي (22.276 nm) و(14.47962 x 10 - 3) على التوالي بواسطة استخدام , UDVM قيم كل من حجم البلرة, الاجهاد وانفعال الشبيكة (22.276 nm), (3.7266 x 10 - 3 TPa) و(14.48006 x 10 - 3) التوالي بواسطة استخدام ,UDSVM قيم كل من حجم البلرة, كثافة الطاقة , انفعال الشبيكة والاجهاد (22.276 nm), (21689.7 KJ/m3) , (14.48024 x 10 - 3) و(2.9957 x 10 - 3 TPa) التوالي بواسطة استخدام .UDEDVM في طريقة العرض المتكامل حسبنا قيم حجم البلرة وانفعال الشبيكة هي (25.126 nm) و(2.443 x 10 - 3) على التوالي. في طرق اخرى مثل شيرار (Scherrer) التي تعطي قيمة حجم البلرة هي (17.622 nm) وقيمة انفعال الشبيكة هي (6.0362 x 10 - 3), بينما ويليمسن - هال (Williamson - Hall) التي تعطي قيمة حجم البلرة هي (22.063 nm) وقيمة انفعال الشبيكة هي (1.19225 x 10 - 3), حددنا قيمة كثافة الانخلاع والتي هي (7.912 x 1015 lines/m2) بواسطة استخدام نتائج طريقة التباين وحددنا قيمة مساحة السطح والتي هي (4.801 x 104 m2/g). وقد استخدمت طريقة التباين لتحديد التغير في قيم حجم البلرة وو مربع متوسط الانفعال في درجات حرارة مختلفة (80 ، 300 ، 350 و400) درجة مئوية. | The lattice strain and crystallite size of ZnO nanoparticles have been determined by using variance and integral breadth methods, and also used some other methods such as Scherrer and Williamson - Hall to calculate above parameters. Then calculated dislocation density, surface area and studied the behavior of crystallite size and lattice strain at different temperatures by using variance method. In this study the variance method have been developed by presenting three new models (The Uniform Deformation Variance Model UDVM, The Uniform Deformation stress Variance Model UDSVM and The Uniform Deformation Energy Density of Variance Model UDEDVM) to determine lattice parameters such as particle size, microstrain, energy density and stress for the first time. By variance method we have calculated the values of crystallite size and mean square strain are (22.276 nm) and (0.133473 x 10 - 3) respectively. Then we have calculated the values of crystallite size is (22.276 nm) and lattice strain is (14.47962 x 10 - 3) by using UDVM, the values of crystallite size is (22.276 nm), stress is (3.7266 x 10 - 3 TPa) and lattice strain is (14.48006 x 10 - 3) by using UDSVM and the values of crystallite size, stress, energy density and lattice strain (22.276 nm), (2.9957 x 10 - 3 TPa), (21689.7 KJ/m3) and (14.48024 x 10 - 3) respectively by using UDEDVM. In integral breadth method we have calculated the values of crystallite size and lattice strain are (25.126 nm) and (2.443 x 10 - 3) respectively. The other methods such as Scherrer which gives the value of crystallite size is (17.622 nm) and lattice strain is (6.0362 x 10 - 3), while the Williamson - Hall gives the crystallite size is (22.063 nm) and the lattice strain is (1.19225 x 10 - 3). We have determined the value of dislocation density which it is (7.912 x 1015 lines /m2 ) by using the results of variance method and determined the value of surface area which it is (4.801 x 104 m2/g) by using the results of variance method. Have been used variance method to determine the change in values of crystallite size and mean square strain at different temperatures (80, 300, 350 and 400) oC

الخصائص الفيزيائية الضوئية وانتقال الطاقة لاغشية بولي مثيل ميثا اكريليت المطعمة بصبغتين ليزريتين كومارين 102 ورودامين B == Photophysical Properties and Energy Transfer of Two Laser Dyes (Coumarin 102 and Rhodamine B) Doped PMMA Films

اسم المؤلف: احمد عامر ناصر
اسم المشرف: محاسن فاضل هادي الكاظمي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الالياف الضوئية
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم تقسيم هذا البحث على ثلاثة اجزاء : الجزء الاول تضمن دراسة تاثير التركيز للكومارين 102 والرودامين ب في الحالة السائلة والصلبة . النتائج بينت ان شدة الامتصاص تزداد مع زيادة تركيز الصبغة وهذا يتوافق مع قانون بير - لامبرت. وان افضل تركيز كان (5 - 10x5) مولاري لكلا الكومارين والرودامين ب. ايضا شدة الامتصاص ازدادت مع زيادة نسبة تطعيم الصبغة للبوايمر في حالة الاغشية وان افضل تركيز في هذة الحالة كان (4 - 10x1) مولاري بنسبة تطعيم ( 20 مل) للكومارين 102 حيث اظهر امتصاصية جيدة (0.252) وناتج كمي (0.72) ولاغشية الرودامين ب كان افضل تركيز (5 - 10x5) مولاري بنسبة تطعيم للصبغة (15 مل) حيث ظهرت شدة الامتصاصية (0.11) والناتج الكمي (0.96) . اما الجزء الثاني فتضمن دراسة انتقال الطاقة لخليط الكومارين 102 والرودامين ب في الحالة السائلة والصلبة. باخذ الكومارين 102 كمانح والرودامين ب كقابل وتثبيت تركيز المانح عند (4 - 10x1 مولاري و4 - 10x5 مولاري) وتغير تركيز القابل من (4 - 10x1 الى 2 - 10x1 مولاري) في كلتا الحالتين.لوحظ هناك ازاحة نحو الاطوال الموجية الطويلة (ازاحة حمراء) في طيف انبعاث الرودامين ب تزداد مع زيادة تركيزه. والتي تعطي لنا امكانية تنغيم عالية في هذا المدى من الطول الموجي. في حالة السوائل افضل تركيز لانتقال الطاقة كان للمانح (4 - 10x1) مولاري وافضل تركيز للقابل كان (4 - 10x5) مولاري. في هذة التراكيز تم تحسين طيف فلورة الرودامين ب. ان عملية الامتصاص الذاتي حدثت عندما يكون تركيز القابل (4 - 10x1) مولاري وبهذة العملية تم تحسين طيف فلورة الكومارين 102 الى اعلى قيمة. في حالة الاغشية افضل نسبة تطعيم لانتقال الطاقة كانت للكومارين 102 (4 - 10x1) مولاري وللرودامين ب (2 - 10x1) مولاري وعندما يكون تركيز الكومارين 102 (4 - 10x5) مولاري وللرودامين ب (2 - 10x1) مولاري. الجزء الثالث يبين FTIR وحيود الاشعة السينية XRD والتصوير الفوتغرافي الذي يخص التركيب. نتائج FTIR تظهر زيادة وازاحة في شدة قمم الاواصر عند زيادة تركيز الصبغة ونسبة تطعيمها مع البوليمر. ومن نتائج مXRD نلاحظ سلوك الكومارين 102 والرودامين ب سلوكا بلوريا. اما PMMA فسلوكه عشوائي. ومن نتائج التصوير الفوتغرافي نجد بان صبغة الرودامين ب تعمل كمرشح عند خلطها مع ال PMMA بوليمر | This study included three parts : the first part included concentration effect study of coumarin 102 (C102) and Rhodamine B (RhB) in solution and solid state, the obtained result show the absorbance intensity increase as increase the concentration and this agreements with Beer - Lambert law, the best concentration was (5x10 - 5M) for both C102 and RhB. Also, the absorbance intensity increased with increasing the doping ratio of dye in film state, the best concentration in this state was (1x10 - 4M) for C102 with doping ratio (20ml). Which have a good absorbance was (0.252) and quantum yield was (0.72). And for RhB films was (5x10 - 5M) with doping ratio (15ml) which has absorbance (0.11) and quantum yield (0.96). The second part contented the energy transfer study of C102 and RhB mixture in solution and solid state by takeing C102 as donor and RhB as an acceptor and fixed the donor concentration at (1x10 - 4M and 5x10 - 4M) with variation the acceptor concentration from (1x10 - 4M to 1x10 - 2M) in two cases, observed that the red shift in RhB emission increase with increase the acceptor concentration, which give us a long range of tunable in emission spectrum of RhB dye. The best donor concentration was (1x10 - 4M), and the best concentration of acceptor was (5x10 - 4M) in solution state this concentration led to improve the RhB fluorescence spectrum. The self absorption process occurred when the acceptor concentration (1x10 - 4 M) and this process led to improve the C102 fluorescence spectrum to maximum value . For the solid state the best doping ratio of energy transfer was (1x10 - 4M C102 + 1x10 - 2 M) and (5x10 - 4C102 + 1x10 - 2M). The third part explained the FTIR and X - ray diffraction and microscope structure study. The FTIR result show increase and shift the band peak intensity at increase the concentration and doping ratio. From XRD show the crystalline structure of C102 and RhB and amorphous structure of PMMA polymer. The morphology study show the RhB dyes behave as filter at doped it with PMMA polymer

دراسة تطور الجسيمات داخل الغلاف الجوي باستخدام نظام المحاكاة AIRES == Studying of Air Shower Development by AIRES Simulation System

اسم المؤلف: احمد جمعة حبيب سالم الطائي
اسم المشرف: احمد عزيز الربيعي | بتول درعم بلاوة
الموضوع العام: علوم الفيزياء
السنة: 2014
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تمثل دراسة الاشعة الكونية ذات الطاقات العالية احد اكثر المواضيع تحديا في مجال الفيزياء الفلكية. اذ ان تفاعل الجسيمات الاولية مع نوى ذرات الهواء داخل الغلاف الجوي الارضي تنتج كم هائل من الجسيمات الجوية. في هذا العمل تم اجراء المحاكاة لوابل من الجسيمات الجوية المشحونة (EAS) من خلال التحقق من معاملات التطور الطولي ( عدد الجسيمات المشحونة N واكبرعمق في الغلاف الجوي الارضي Xmax) باستخدام نظام محاكاة لجسيمات الهواء الذي يدعى يرنامج AIRES عند مدى الطاقة (1014 - 1019) الكترون فولت للجسيمات الاولية مثل (الالكترونات, البوزيترونات, البروتونات, جسيمات كاما, نوى ذرات الحديد) وزوايا السقوط (0o, 10o, 30o). ان محاكاة دالة التوزيع الجانبية (LDF) لوابل من الجسيمات الجوية تم اجراؤها باستخدام برنامج AIRES لطاقات اولية مختلفة, جسيمات اولية مختلفة وزوايا سقوط مختلفة. هذه المحاكاة يمكن ان تستعمل لاعادة بناء نوع وطاقة الجسيم المتولد من وابل من الجسيمات الجوية المشحونة والتي سجلت في منظومات عملية متعددة. لقد تم استخدام نموذج هتلر (Hitler's model) في حساب عدد الجسيمات المشحونة واعلى عمق جوي للتطور الطولي في الغلاف الجوي الارضي لعدد من الجسيمات الاولية المشحونة مثل (الميونات, البايونات, الالكترونات, البرتونات, الفوتونات ونوى ذرات الحديد) عند مدى الطاقة المذكوراعلاه الكترون فولت وزوايا السقوط المذكورة اعلاه . ان حساب دالة التوزيع الجانبية تمت باستخدام صيغةNishimura - Kamata Gresien (NGK)) ) ضمن مدى الطاقة المذكوراعلاه وزوايا سقوط مختلفة (0o, 10o, 30o, 40o, 50o, 60o). ولقد تم برمجة هذه الصيغ بلغة فورتران 90 وباستخدام Compaq Visual Fortran (CVF 6.6) ]لاحظ الملحق [A. وتمت المقارنة بين محاكاة التطور الطولي (N and Xmax) باستخدام نموذج SIBYLL الهادروني مع نموذجين هادرونيين مثل.(QGSJET99 and SIBYLL16) وقد اظهرت هذه المقارنة فرصة جيدة لتحديد سلسلة تفاعلات الاشعة الكونية مع نوى ذرات الهواء في الغلاف الجوي الارضي. ان المقارنة بين نتائج الحسابات النظرية ووالنتائج التجريبية لعدد الجسيمات المشحونة واكبر عمق في الغلاف الجوي للجسيمات الاولية مثل (البروتونات ونوى ذرات الحديد) قد اعطت نتائج جيدة ضمن مدى الطاقات العالية المذكور اعلاه. | The study of high energy cosmic rays represents one of the most challenging in the astroparticle physics fields. The interaction of primary particles with atmospheric nuclei produces huge Extensive Air Showers (EAS). In this work the simulation of EAS is performed by investigating the longitudinal development parameters (number of charged particles N and depth of shower maximum Xmax) using a system of air shower simulation which is called AIRES code at the energy range (1014 - 1019eV) for different primary particles like (electrons, positrons, protons, gamma particles and iron nuclei) and different zenith angles (0o, 10o and 30o). The simulation of the lateral distribution function in EAS is performed using AIRES code for different primary energies, different primary particles and different zenith angles. This simulation can be used to reconstruct the type and energy of the primary particles that generated EAS for charged particles that registered with different EAS arrays. Using Hitler's model the estimation of the number of charged particles and depth of shower maximum of longitudinal development in EAS is performed for different primary particles such us (muons, pions, electrons, protons, photons and iron nuclei) at the same energy range and for the zenith angles mentioned above. The calculation of the lateral distribution function of charged particles is fulfilled using Nishimura Kamata Greisen (NKG) formula in the same energy range above and different zenith angles (0o,10o,30o,400,50o and 60o). These formulas have been programmed by Fortran 90 with the aid of Compaq Visual Fortran (CVF 6.6)(see Appendix A). The comparison between the simulated longitudinal development of the number of charged particles and depth of shower maximum using SIBYLL hadronic model with two hadronic models like (QGSJET99 and SIBYLL16) has shown an opportunity for determination of cosmic ray cascade interactions in EAS. The comparison between the theoretical and experimental data of the number of charged particles and depth of shower maximum for primary particles like (protons and iron nuclei) in EAS gave a good agreement within the energy range mentioned above.

دراسة تاثير زاوية الترسيب على الخصائص البصرية والكهربائية لاغشية (SnxTe1 - x) الرقيقة == Study the Effect of Deposition Angle on the Optical and Electrical Properties of (SnxTe1 - x) Thin Films

اسم المؤلف: احمد ابراهيم جواد الحسيني
اسم المشرف: رعد سعيد عبد الراوي
الموضوع العام: علوم الفيزياء
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا البحث دراسة الخصائص التركيبية والبصرية والكهربائية لاغشية ((Sn0.3Te0.7,Sn0.5Te0.5,Sn0.7Te0.3المحضرة بطريقة الترسيب الحراري الفراغي على قواعد زجاجية عند درجة حرارة الغرفة وبزوايا ترسيب مختلفة θ=(0 ̊, 40 ̊, 70 ̊ ) وبسمك (100 ±10 nm) للخصائص التركيبية وبسمك10 nm) (50 ± للخصائص البصرية وايضا بسمك10 nm) (350 ± للخصائص الكهربائية ولدراسة تاثير تغير السمك(250,300,350)nm على الخصائص الكهربائية لاغشية (Sn0.5Te0.5).استخدمت تقنية حيود الاشعة السينية لدراسة الخصائص التركيبية لاغشية ((Sn0.3Te0.7,Sn0.5Te0.5,Sn0.7Te0.3. المرسبة بزوايا ترسيب مختلفة وقد اظهر نموذج الحيود ان جميع الاغشية متعددة التبلور. الحجم الحبيبي يقل بزيادة زاوية الترسيب بينما تزيد كل من كثافة الانخلاعات والمطاوعة المايكروية بزيادة زاوية الترسيب.درست الخصائص البصرية للمدى الطيفي )nm 300 - 900) , ان زيادة نسبة Te يؤدي الى تقليل النفاذية والانعكاسية وزيادة قيمة الامتصاصية.ان زيادة زاوية الترسيب له تاثير واضح في تقليل النفاذية وزيادة الامتصاصية مع ازاحة نحو الاطوال الموجية الطويلة. اما بالنسبة لفجوة الطاقة المباشرة المسموحة فتقل مع زيادة زاوية الترسيب وتزداد مع زيادة نسبة Te .ان قيم معامل الامتصاص ومعامل الخمود تزداد بزيادة زاوية الترسيب في حين تقل قيم كل من الانعكاسية ومعامل الانكسار وثوابت العزل الحقيقية والخيالية مع زيادة زاوية الترسيب.اما الخصائص الكهربائية فان التوصيلية الكهربائية تزداد مع زيادة درجة الحرارة ومعامل سيبك يزداد مع زيادة فرق درجات الحرارة لكل زاوية الترسيب .وان زيادة زاوية الترسيب ونسبة Te له تاثير واضح في تقليل التوصيلية الكهربائية والتيار وزيادة معامل سيبك .وايضزايادة سمك الغشاء له تاثير بزيادة التوصيلية الكهربائية والتيار وتقليل معامل سيبك . | In this research, studies the structural ,optical and electrical properties of (Sn0.3Te0.7 , Sn0.5Te0.5 and Sn0.7Te0.3) thin films prepared by thermal vacuum deposition method on glass substrates at room temperature and different angles of deposition θ = (0 ̊,40 ̊,70 ̊ ) with thickness (100nm ±10nm) for the structural properties and (50nm ±10nm) for the optical properties also a study of the electrical properties of (Sn0.5Te0.5) thin films deposited with different angles of deposition θ =(0 ̊,40 ̊,70 ̊ ) with thickness (250,300,350)nm. The X - ray diffraction technique (XRD) has been used to study the structural properties of (Sn0.3Te0.7, Sn0.5Te0.5 and Sn0.7Te0.3) films deposited at oblique angles and it has appeared that the films are polycrystalline. The grain size decreases with increasing deposition angle, while the micro strain and dislocation density are increased with increasing deposition angle. The optical properties are taken for spectral range (300 - 900) nm. The transmittance decreases with increasing the Te percentage, while the reflectance increases with decreasing Te percentage. The absorptance increases with the increasing of Te percentage. The increasing in deposition angle has an obvious influence in the decreasing of transmittance and increasing of absorptance with shifting toward long wavelengths. The energy gap value decreases with the increasing deposition angle, the allowed direct transition increase with increasing the Te percentage. The absorption coefficient, extinction coefficient and imaginary dielectric constant values are increased with increasing deposition angle, while the refractive index, real dielectric constant values are decreased with increasing deposition angle. The electrical conductivity increases with increasing temperature. Seebeck Coefficient increase with increasing the temperatures difference for all deposition angles. The increasing of deposition angle and Te percentage have an obvious influence in the decreasing of D.C conductivity and current and increasing of Seebeck Coefficient. Also the increasing of thicknesses for all deposition angles have an obvious influence in the increasing of D.C conductivity and current and decreasing of Seebeck Coefficient .The current is increasing in light when it complains with dark

تطوح فقدان الطاقة الجزئي للزركونيا والالومينيا للبروتون وحزم جسيمات الفا == Partial of Energy loss straggling of ZrO2 and Al2O3 for proton and ? - particle beams

اسم المؤلف: ابراهيم عباس ابراهيم الخزرجي
اسم المشرف: رياض خليل احمد العاني
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا العمل اجراء الحساب النظري لمقدار فقدان الطاقة (التطوح) للزركونيا〖(ZrO〗_2) والالومينيا (〖(Al〗_2 O_(3)) لحزم البروتون وجسيمات الفا الساقطة على هذه الاهداف وبطاقات . (T= 0.05, 0.25, 1, 2, 2.5 Mev/u) ان الصيغة لدالة العزل مثل قطب البلازمون التقريبي (PPA) وتعديلاتها من خلال نموذج درود( (Drude - model ، تم اعتمادها لحساب الاحتمالية للبروتونات وحزم جسيمات الفا المسببة للتهيجات الالكترونية في الاهداف المستعملة فقد حسبت مع الاخذ بنظر الاعتبار تاثير طول الحجب (Screening Length) والتي اظهرت توافقا جيدا مع نتائج حسابية تم التوصل اليها في دراسات سابقة، علاوة على حساب قدرة الايقاف الجزئي للشحنة الفعالة ζ(q) (PSPEC) للبروتونات وجسيمات الفا المتحركة خلال اكاسيد مختلفة وبشكل رئيسي بالهدفين المستخدمين في هذا العمل. وكذلك معدل الطاقة < E > ومربع معدل الطاقة للبروتون <〖 E〗^2> تم حسابها ايضا في عملنا الحالي .كما تم كتابة برنامج(Ibrahm - Al2O3.for) بلغة (الفورتران - 90) لاجراء الحسابات العددية موجود نسخة مرفقة منه. | The energy - loss straggling of zirconia (ZrO2) and alumina (Al2O3) has been determined theoretically for proton and alpha - particle beams with incident specific energies (T= 0.05, 0.25, 1, 2, 2.5) (Mev/u). The dielectric formalism like Plasmon Pole Approximation (PPA) and its modified form presentation by Drude - model has been used to calculate the probability for an energetic proton and alpha to produce electronic excitations in target of zirconia (ZrO2) and alumina (Al2O3), taking in consideration screening length effects and good agreement is achieved with previous work. The partial stopping power effective charge (PSPEC) , ζ(q) and partial energy straggling effective charge (PSGEC)η(q) for proton and alpha particle moving through several oxides, namely Al2O3, and ZrO2 have been calculated . Good agreement has been achieved with previous work. Also average energy, <E> and average of square energy <E^2> for proton and alpha particles in Al2O3 and ZrO2 have been calculated in present work.. A program (Ibrahm - Al2O3.for) has been written FORTRANT - 90 for numerical calculation, and a copy of program is available in the present work.

دراسة متانة الربط الانتشاري بين السيراميك والمعادن في الحالة الصلبة == Investigation of the Relaibility of Diffusion Bond Strength Between Ceramic - Metals in Solid State

اسم المؤلف: اروى غازي ناجي الطائي
اسم المشرف: زاريه ازات سركيس | ثامر عبد الجبار جمعة
الموضوع العام: علوم الفيزياء
السنة: 2010
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

دراسة تعجيل الالكترونات باستخدام تفاعل الليزر مع البلازما الممغنطة للاتصادمية == Study of Laser Acceleration of Electrons in a Magnetized Collisionless Plasma

اسم المؤلف: امال محمد كنيوي العكايشي
اسم المشرف: خالد عباس يحيى | محمد عبد الزهراء حبيب
الموضوع العام: علوم الفيزياء
السنة: 2010
الموضوع الدقيق: فيزياء الالكترونيات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: A theoretical and computational investigation was carried out in the field of laser - plasma interaction using the Finite Difference Method to study the acceleration of electrons with non - relativistic velocities in a non - magnetized and magnetized collisionless plasmas.First, a (Nd : YAG) laser pulse of 25 fs duration and 5x1015 W/cm2 intensity was assumed in the present study.When this laser pulse was allowed to interact with a stationary electron in vacuum, it was found that the electron is accelerated during the interaction only and returns to stationary state after the laser pulse has passed, in agreement with previous works.Also, the interaction of the same laser pulse with a collisionless plasma at electron density ne= 1x1018 cm - 3 was studied. It was noticed that the energy of the electron during the interaction has reached a maximum value of ~ 1 keV at laser pulse intensity of 5x1015 W/cm2, while the energy of the electron after the interaction reached ~ 15 eV for the same laser pulse intensity.Finally, the interaction of the same laser pulse with a plasma was studied at electron density ne=1x1018 cm - 3 in the presence of an external magnetic field for the three values of the field strength B= 60 MG, 70 MG and 80 MG. It was found that there is an increase in the acceleration of the electron to reach a maximum energy of ~ 19 keV at a laser pulse intensity of 5x1015 W/cm2 and an applied external magnetic field strength of 80 MG during the interaction. However, the electron energy after the interaction reached ~ 3 keV at a laser pulse intensity of 5x1015 W/cm2 and an applied external magnetic field strength of 70 MG. This is due to a sustainable generated laser wakefield of ~ 2x109 V/cm. Thus, it is concluded that an applied external magnetic field assists the acceleration of the electron and can subsidize for a high laser beam intensity

محاكاة العين البشرية باستخدام الخوارزمية الجينية == SIMULATION OF HUMAN EYE USING GENETIC ALGORITHEM

اسم المؤلف: لؤي عبد الصاحب رسول الطائي
اسم المشرف: سهى موسى خورشيد الاوسي | محمد صاحب الطائي
الموضوع العام: علوم الفيزياء
السنة: 2010
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The aim of this research is simulate an optical system for the human eye using Genetic algorithm. The considered optical characteristics of the optical system simulator include spot size (Z), spot diagram, and effective focal length (EFL). These characteristics are determined with the aid of some mathematical relations, which give the efficiency and accuracy of the adopted optical system design. The work has been performed in two stages : In the first stage, Genetic Algorithem optimization (GA) is used to get the best design by optimizing the optical featurs of the eye elements. The optimal eye design was tested using Zemax software, the test includes estimation of the image quality, and optimal performance for the proposed optical eye system.The second stage was implementing a specially developed software to simulate the behavior of the human eye. The simulator using visual basic 6 and works under Windows operating system, it is able to plot the eye design graphically, and can estimate the considered optical functions to determine the efficiency of the eye simulator.The simulator showed agood results for spot size, spot diagram and EFL, the present work has been gained some credibility when the considered optical functions achieved by the simulator are found compatible with those achieved by Zemax, since the comparison showed a behavioral matching between them, which ensure the correct path of the GA based eye design and the successful proposed eye design.

دراسة الفجوات المصنعة بهيئة عيوب بواسطة الاشعة السينية لمصبوبة المنيوم ومفاصل لحام الفولاذ == X - ray Radiographic Study of Simulated Voids - Like Defects in Aluminum Casting and Welded Joints in Steel

اسم المؤلف: فرقد رشيد سعيد الزبيدي
اسم المشرف: مازن فضيل محروك | ثامر عبد الجبار جمعة
الموضوع العام: علوم الفيزياء
السنة: 2010
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: This project investigates the detection and evaluation of imperfections in internal structures of castings and welded joints by x - ray radiography. Optimum radiography conditions that lead to clear and high contrast image on the radiograph were studied.Equations derived earlier for finding the size and depth of defects in castings were used in this project to test their applicability to a wide range of geometrical parameters used in radiography.The importance of non - destructive testing NDT in industry is discussed. X - ray radiography being one of the NDT techniques, has some privilege over other techniques. For example, welded joints sometimes contain internal flaw or blowholes that may escape detection by other NDT techniques but can not escape detection by x - rays. Two kinds of samples are prepared for radiography. The first sample is aluminum casting through which two different sizes of steel spheres are included. This sample was radiographed from two opposite sides and the x - ray films were analyzed.The second sample is steel plates which are welded by arc welding and then radiographed by x - rays.Imperfections in this sample such as incomplete root penetration, undercut and porosity were detected by x - ray radiography. Different conditions influencing the preparation and radiography of the above samples were studied. The prepared welded sample was radiographed three times for different high voltages (120,140,160) kV respectively with an exposure time of (80) second. The best quality image where the defects can be detected clearly if its size is (5%) of the radiographed object using (120) kV and (140) kV. Moreover the results show that the optimum film gradient was found at (140)kV and the contrast is better than obtained with (120)kV while darkening image was found at (160)kV.In field of the aluminum casting, the two equations were derived earlier proved their capabilities as a right method for identification each of size and depth of such defects in castings and welded joints

دراسة قدرة الايقاف والمدى للبروتونات == Study of Stopping Power and Range for Protons

اسم المؤلف: مصطفى عبد المحسن عبد العالي
اسم المشرف: محمد احمد صالح
الموضوع العام: علوم الفيزياء
السنة: 2009
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The calculation of the value of stopping power and the range for the proton is done by two ways : first, using Bethe - Bloch formula and second, using Bragg - Kleeman rule. The differences between the experimental and theoretical values of stopping power and range required studying the corrections for Bethe - Bloch formula which are represented by the maximum energy and density correction and then comparing the results with experimental values. Using these two formulas it has been found that the results computed by the Bethe - Bloch formula without corrections (maximum energy and density correction) are in agreement with experimental results for βγ ≤ 2 ( E ≤ 2×103MeV ) and for βγ ≤ 102 ( E ≤ 105MeV ) with corrections. The maximum energy and density corrections contributed to decrease the difference with the experimental results for βγ ≥ 102 ( E ≥ 105MeV ).The values of stopping power computed using the Bragg - Kleeman rule are in agreement with experimental results for E ≤ 200MeV and the range values computed using the Bragg - Kleeman rule are in agreement with the results computed using the Bethe - Bloch formula for E ≤ 400MeV .The results show that the energy losses for protons at the high energy values are low and vise versa; the energy losses for protons at the low energy values are high.The present calculations confirm that the proton looses its largest energy at the end of its path in matter

تاثير المعاملة الحرارية على بعض الخواص الميكانيكية للمتراكب المنيوم - كاربيد البورون == Effect of heat treatment on some mechanical properties of Aluminum - Boron carbide composites

اسم المؤلف: لمى جمال عباس الرماحي
اسم المشرف: قاصد عبد الستار صالح الجنابي | سعد رحمة الله
الموضوع العام: علوم الفيزياء
السنة: 2012
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Aluminum matrix composites reinforced with boron carbide are currently employed in the nuclear industry. It's used as a control rod in nuclear reactors; Since B4C has very high absorption cross section for thermal neutrons. The objective of this work is to study the effect of heat treatment on the mechanical properties of the Al - B4C metal matrix composites prepared by powder metallurgy techniques. Compressibility was measured with the Al powder. The chosen compaction pressure was 2500psi. Samples were prepared by adding 5%, 10%wt B4C to Al as well as the Al powder. Sinterability was evaluated at different temperatures (400,450,500,550,600,650°C) during 2, 4, 6, 8; 10 hr for soaking time.Mechanical test were evaluated, showed little improvement in hardness, compressive strength and young's modulus in temperatures 400,450,500,550°C, and significant improvement in hardness and compressive strength in temperatures 600and 650°C, and also improvement to the elastic modulus. Specific samples were irradiated by neutron source, and mechanical tests showed little decrease in their mechanical properties (hardness and compressive strength) due to low neutron fluence available that gives insignificant effec

قياس تركيز باعثات الفا في الادرار البشري باستخدام كاشف الاثر النووي في الحالة الصلبة PM - 355 == Determination of alpha emitters concentration in human

اسم المؤلف: شيماء ذياب عطية العبودي
اسم المشرف: مازن مانؤيل الياس | ندى فاضل توفيق
الموضوع العام: علوم الفيزياء
السنة: 2006
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: This work owes its importance to the fact that it aims at knowing and measuring the concentrations of alpha - particles emitters discrete by the human body in the urine in particular. Knowledge of these concentrations is extremely important since it reveals whether a person has received such doses of radioactive materials emitting alpha - particles that result in the occurrence of malignant tumor and mutations. This subject being so essential to the health of individuals and being a great help to physicians to make the proper diagnosis in the relevant cases, has imposed itself on us as the topic of this thesis. Human urine samples were taken from Iraqi workers in different fields (phosphate plants, fertilizer plants, teaching staff in nuclear physics laboratory, painters, patient and reference healthy people of different ages), using PM - 355 solid state nuclear track detectors. The exposure method was used by immersing PM - 355 detectors in urine samples for three weeks, then etching by 6.25N NaOH for 5 hrs. The track density was measured via an optical microscope. The alpha emitters concentrations in the urine samples were calculated in comparison with standard samples that were prepared in the nuclear laboratory of physics department - College of Science AL - Nahrain University.The obtained results show that the concentrations of alpha emitters in the urine samples of patients range from 1.81ppm to 2.87ppm , from 0.087ppm to 1.32ppm in reference healthy people, in painters from 0.77ppm to 1.46ppm,workers in phosphate plants from 0.94 ppm to 1.89 ppm, workers in fertilizer plants from 1.0ppm to1.42 ppm , and from 1.0 ppm to 1.29 ppm in teaching staff in nuclear physics laboratory .Deductions from the results of this work regarding the dependence of concentrations on the person&#39;s occupation, years of service, sex, age and health condition have been dealt with in sufficient details as required.

اثر التلدين على الخواص البصرية لاغشية اوكسيد الالمنيوم (Al2O3) الرقيقة المحضرة بطريقة الترسيب الكيميائي الحراري == The effect of annealing on the optical properties of (Al2O3) thin films prepared by chemical spray pyrolysis

اسم المؤلف: عبير كمال جعفر
اسم المشرف: خضير عباس مشجل | ابتسام محي عبد العزيز
الموضوع العام: علوم الفيزياء
السنة: 2009
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The recent study deal with the structural and optical properties of Al2O3 thin films prepared by the chemical spray pyrolysis technique at glass substrate(450°C) and studying the effect of annealing at different temperatures (500,550,600) °C on the optical properties.The results of X - ray diffraction showed that the prepared films are polycrystalline, the study of optical properties included the record of transmittance spectrum of the films with the wavelengths range from (300 - 900)nm, and then measuring the forbidden energy gap of electronic transitions where it was found that the values of the forbidden energy gap of both allowed and forbidden transitions are (3.4)eV and (2.5)eV successively and it was (1.6)eV for the allowed indirect transition. When annealing the Al2O3 thin films, the values of the forbidden energy gap of the allowed and forbidden of direct transitions are (2.7)eV and (3.6)eV and it is (1.9)eV for the allowed indirect transition. Also, absorption coefficient , reflectance and optical constants such as extinction coefficient, refractive index, dielectric constants with it's two parts real and imaginary and optical conductivity as a function of photon energy have been studied, the study showed that the annealing caused an increase in energy gap values, reflectance, transmittance, refractive index and real part of dielectric constant, and a decrease in the values of absorptance, absorption coefficient, extinction coefficient, imaginary part of dielectric constant and the optical conductivity.
1 ... 114 115 116 117 118 ... 187