عرض: 25 50 75 100 النتائج

نتائج البحث: 25 من أصل 438

مراقبة انذار المرضى عن بعد الزمن الحقيقي اعتمادا على الصحة الالكترونية الصحة العنكبوتية الصحة الخلوية وشبكات التحسس اللاسلكية حالات الدراسة موضع منام المريض سكر الدم استجابة الجلد الكلفانية والتخطيط العضلي == Remote Patients Monitoring / Alarming In Real Time Based On E - Health / I - Health / GSM - Health And WSN, (Case Study : PP, BG, GSR And EMG

اسم المؤلف: علي جاسم رمضان
اسم المشرف: سمير جاسم محمد | محمود شاكر نصر
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: Patient's health monitoring / diagnosing systems have become the focus of attention of researchers today. At the present time, the researchers are dealing with the E - health fields to develop and improve the healthcare systems and they work to combine the GSM and Internet technologies together.In the presented work, the researcher designed a portable real time wireless medical system for monitoring / diagnosing the patients' status based on E - health / GSM - health / I - health and wireless sensor network (WSN) under ZigBee protocol, and to support alarming and printing of medical reports subsystems.The presented system consists mainly of four subsystems, which are sensing & data transceiver, base station (BS), GSM and Internet. Where sensing & data transceiver subsystems be in the patients' lobbies and connected remotely with the base station (BS) subsystem in the wireless sensor network that collect and display the sensing data in it. Also in the designed system, the GSM and Internet technologies are inserted practically in the network.The implemented system measures the biomedical data utilizing a group of sensors that are not available in the country's hospitals in such integrated system, which are the patient position sensor (PPS), galvanic skin response sensor (GSR), blood glucose sensor (BGS), and electromyography sensor (EMG). Moreover, the system has the ability to add many other sensors.In the proposed system, three nodes (lobbies) are considered according to the facilities available, but it can monitor / diagnose unlimited patients' numbers.The system monitors the sleep position and skin conductance (indicator to patient's calm) of the patients in real time with alarm for each abnormal case in the base station (BS) and in lobbies, and it also follows up the glucose rate in patient's blood and diagnose the electromyography (muscle and nerve) status.The GSM subsystem (GSM - health) is used for remotely following - up the patients' status by sending SMS alarm in time for any abnormal case of the patient's sleep position and skin conductance, also it has ability to send the glucose data to doctor's phone. All these services are performed by using a personal phone device only without using any additional GSM modem or other apparatus, so this method reduces cost, complexity and delay time of the system that's done by interfacing the phone with the PC directly via USB port and the messages sending procedure executed using special SMSs AT commands, so the doctors become able to communicate with BS using SMS or voice calling to give the fast and direct necessary guidance.The Internet subsystem (I - health) is another excellent service for the presented system, by which remotely following - up the glucose levels by uploading the glucose data to a specific web site. It is performed by designing a web site that is programmed using VB.NET and ASP.NET languages. of course, user login feature is added to protect the privacy of patients and feedback comments feature between the doctors and patients to take the important guidance.The system has ability to introduce a printed hard copy report about the patient's electromyography status or result and blood glucose levels, by utilizing VISUAL BASIC program. Moreover, it performs searching process about the active nodes in network, this means that it detects any new node (new patient) and put it in service. In addition, the system records the patient's information and stores his health data for any archiving process or statistical study.The main hardware that is used in the implemented system includes MCUs, sensors and transceivers, and used the LABVIEW program to display the data in its GUI windows in the computer of BS.The system has been implemented practically at low cost and low power, gave expected and accurate results, and presented to the specialists doctors and they have expressed their conviction and effectiveness of the system in practice.

تصميم وبناء هوائي عريضة الشريط باستخدام المواد المسماة مابعد المادة == Design And Implementation of Ultra - Wideband Metamaterial Antenna

اسم المؤلف: مروه مكي حمد
اسم المشرف: طه احمد عليوي | سليمان مرتضى عباس
السنة: 2014
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: This study focused on designing and analyzing patch antennabased metamaterial with the aid of partial ground plane. High Frequency Structure Simulation (HFSS) software was used to build and analyze a proposed unit cell of 4×4 mm² and resonant frequency of around 12 GHz. The unit cell was constructed from a patterned patch and ground plane that are connected with via through an FR - 4 substrate. The unit cell performances were studied in terms of S - parameters, effective refractive index, and dispersion properties. And it was found that the metamaterial properties appeared in the frequency band from 11 GHz to 14 GHz, where the unit cell exhibited less than 1 refractive index. A theoretical investigation based on TLM was developed to extract the values of thebasic lumped, RLC, elements network. It was found that the proposed unit cell behave like an unbalanced case of a passive constant k band elimination filter in the mentioned earlier frequency band. A parametric study based on numerical simulation was invoked to arrive to the optimal design through monitoring the effects of adding the MTM structures on the antenna performance. Therefore, this parametric study was optimized to achieve maximum bandwidth with relatively best gain.Finally, the optimal design was fabricated, measured and compared with the numerical results, obtained from Computer Simulation Technology (CST) and HFSS, in term of radiation pattern, S11 spectrum and gain. The experimental results confirmed that the gain of the antenna was 5.8 dBi at 10 GHZ with excellent matching over a wide range of frequencies. Furthermore, acceptable agreement was achieved between measured and simulated results in terms of S11 spectrum and radiation patterns at 10 GHz.

تجزئة الحزمة لالغاء الضوضاء المتكيف في تنقية الاشارة الكلامية == Subband Decomposition For Adaptive Noise Cancellation In Speech Enhancement

اسم المؤلف: حوراء فاضل عبيد
اسم المشرف: منال جميل الكندي
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Nowadays speech processing methods are usually implemented in the time or frequency domain. Filter bank can be considered as a divide and conquer approach within signal processing, since large problems are sub - divided into many smaller problems. While filter banks are essential components of speech processing, and in signal processing in general, they will have the focus in present days. An adaptive filter is a filter that self adjusts its transfer function according to its optimizing algorithms. Least mean square algorithm has slow convergence when used with nonstationary signals like speech and it has high computational cost but normalization of step size (or input signal) leads to a useful variant of the LMS algorithm known as the normalized LMS (NLMS) algorithm, which gives better convergence characteristics than the LMS because it uses a variable step - size with respect to the input signal power.To improve the convergence rate and/or computational complexity and also to overcome the disadvantage of a full band adaptive filtering, a structure is illustrated that is subband adaptive filtering; this will converge faster at a lower computational cost for speech and white noise inputs.This research shows most types of subband decomposition structures and makes comparison among them based on their performance to cancel the noise with minimum computational complexity, maximum convergence speed and maximum noise cancellation with lowest delay.Moreover three new hybrid tree configurations or the tree decom - position are proposed to maximize the overall performance of adaptive noisecancellation system.They are given the abbreviations HTPSAF1,HTPSAF2 and HTPSAF3. These three systems use polyphase filter bank that has showed a noticeable increase in the convergence speed and large reduction in the computational complexity due to the lower number of coefficients that can be achieved for the analysis/synthesis filters, which in turn will result in minimum delay in the reconstructed output speech signal.The algorithm of subband decomposition structures has been described theoretically then modeled under MATLAB simulation program using built - in filters and real input signals.

تصميم وتنفيذ منظومة مقاييس متوزعة ذكية == Design And Implementation of A Smart Distributed Metering System

اسم المؤلف: مهند غازي خميس
اسم المشرف: عدي عبد اللطيف عبد الرضا
السنة: 2014
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: This work is concerned with designing and implementing a smart energy metering system that consists of two smart energy meters and a billing center. The designed smart energy meter is a single phase meter in which the amount of consumed energy is calculated using PIC18F45K22 (which is a Peripheral Interface Controller (PIC)) and utilizing ACS758 (which is a Hall - effect based liner current sensor Integrated Circuit (IC)).The amount of consumed energy is sent to the billing center (which is implemented by using a laptop) for issuing the bills. The billing center receives the consumption data and sends the switching commands by utilizing an external communication technology. After comparing various communication technologies, ZigBee is chosen for this work.Two smart energy meters are implemented to test various communication conditions, such as multi - hopping. The design of the two smart energy meters differ only in the ZigBee addresses in the network.The program for the PIC's in the smart meters is written with MikroC PRO V6.0.1, while the program for the laptop in the billing center is written with Visual BASIC 6.

التشوه بالتوافقيات في اشارات التدفق للمتحسس السعوي الحيزي المثبت خارجيا == Harmonic Distortion In The Flow Signals of Externally Mounted Capacitive Spatial Filter

اسم المؤلف: مروه مالك حسوني
اسم المشرف: عباس احمد الشالجي
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: This thesis investigates the performance of some windows on the flow signals that are generated from the planar capacitance spatial filter (PCSF) according to the moving of the solid particle in the channel of the filter. The sensor that operates as non - invasive device for solid flow measurement utilizes the thin wall of a dielectric pipe section as a shielding layer to protect the sensor from erosion, rust and moisture, and to make it more versatile.The finite - difference model equations are solved using successive over relaxation (SOR) methods. The waveforms show that the response of the PCSF is spatially - biased towards particle flowing closer to the plane of sensing electrodes and that the resulting flow signal is non - sinusoidal. The SOR method that is used to compute the PCSF potential fields has been investigated using a mesh of 110 by 32 nodes, and the algorithm was programmed in MATLAB (Release 2013a) using an Intel core ™ i3 PC,CPU processor.To study the effect of the total harmonic distortion (THD) content on the flow signals that are calculated with respect to the fundamental frequency of the power spectrum density through a specific quantitative criterion, this work comprises a comparative study among three types of windows; Hanning, Hamming, and a subOptimal window called the Kaiser window.The effect of particle flying heights, relative permittivity and size on the THD of the flow signal were examined. It was found that theTHD of flow signals at heights closer to the plane of sensing electrodes is high and decreasing gradualy when the particle flying height is far above the sensor. All the three windows used in this work have better suppression of harmonics distortion as compared with unwindowed (raw) flow signal.

طرائق الكشف للتضمين الترددي المتعامد للرابط النازل في نظام تطور طويل الامد (LTE) == Detection Methods For Ofdm Downlink In Long Term Evolution (LTE) System

اسم المؤلف: اكرم جبار عبد الحسين حسن
اسم المشرف: يمان اسماعيل مجيد
السنة: 2014
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: GPP3 التطور على المدى الطويل (LTE) هو تقنية الجيل الرابع اللاسلكية ذات النطاق العريض. هدفه الرئيسي هو تعزيز الكفاءة الطيفية باستخدام تقنيات التضمين الترددي المتعامد بالتقسيم (OFDM). ومع ذلك، ياتي هذا التحسن في الاداء بزيادة التعقيد الحسابي في اجهزة الاستق | 3GPP Long Term Evolution (LTE) is the fourth generation mobile wireless broadband technology. Its key objective is to enhanced spectral efficiency by using Orthogonal Frequency Division Multiplexing (OFDM) techniques. However, this performance improvement comes at the cost of increased computational complexity in the receiver. The goal of this work is to introduce a detection method that gives a better performance with reasonable computational complexity for LTE mobile communication system. An approximated linear baseband model for the two modulation techniques used by the LTE system (which is the Quadrature Phase Shift Keying (QPSK) and sixteen - level Amplitude Modulation (16 - QAM)) have been derived. Three receivers have been simulated and tested. The three receivers use Least Square (LS) channel estimator. These receivers uses channel compensator, decision feedback equalizer and perturbation algorithm. The LTE communication system has been simulated using MATLAB®7 programming language. The results of the computer simulation show that the perturbation algorithm gives an enhancement in the receiver performance of about 2 dB in different mobile channels than decision feedback equalizer and about 5 dB than channel compensator at the 10 - 3 of BER.

بناء خوارزمية تزامن لانظمة (OFDM) باستخدام معالجة الاشارة الرقمية == Dsp - Based Synchronization Algorithm Implementation For OFDM System

اسم المؤلف: رائد ستار جبر
اسم المشرف: محمود عبد القادر عبد الستار
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تعدد الارسال للتردد بالتقسيم المتعامد (OFDM) هو مفتاح تمكين التكنولوجيا لمعظم انظمة الاتصالات اللاسلكية الحالية ذات معدل نقل البيانات العالي. والميزة الرئيسية للـ (OFDM) مقارنة بالطرق التقليدية هو انه يحول القناة ذات النطاق العريض الى قنوات فرعية ضيقة متو | Orthogonal Frequency Division Multiplexing (OFDM) is the key enabling technology for most current high data - rate wireless communication systems. The primary advantage of OFDM over conventional schemes is that it converts a wideband channel into parallel narrowband sub - channels allowing relatively simple channel estimation and frequency domain equalization. It is as an effective technique for coping with channel impairments like multipath propagation and Inter Symbol Interference (ISI) by making use of an appropriate cyclic prefix. One of the major drawbacks of OFDM is that it is more sensitive to synchronization errors than its single carrier counterparts. This thesis describes a real - time implementation of a timing and frequency synchronization for OFDM system using MATLAB software Simulink, DSP processor TMS320C6713 and Code Composer Studio (CCS). The hardware interface converts the baseband signal from the PC to the DSP Processor. Basic transmission and reception performances are evaluated in real time using Real Time data Transfer (RTDX). The practical results and performance evaluation of the synchronization algorithms in OFDM system is presented and discussed. The results are plotted for different offsets of CFO and STO with different values of signal to noise ratio. Also the bit error rate (BER) and the mean square error (MSE) of the system is analyzed. The results show that the time offset more effect than frequency offset because of ISI and ICI occurs when time offset occur in the system. The synchronization algorithm is found to be robust for both CFO and STO simultaneously. It can handle offset of about CFO = 500 Hz and STO = 14 samples simultaneously without wasting extra bandwidth. This algorithm used for synchronization more robust for 16QAM compared with 4QAM modulation.

تاثير اللاخطية في الالياف البصرية على اداء نظام تجميع الاطوال الموجية الضوئية المنقسمة باستخدام تقنية الاستقطاب المزدوج لتقسيمات التردد المتعامد الضوئي == Effect of Fiber Nonlinearity On The Performance of WDM Optical Systems Using Dual Polarization CO - OFDM Technique

اسم المؤلف: بشار مظفر احمد
اسم المشرف: رعد سامي فياض
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The implemented existing high capacity optical networks are based on 50 GHz wavelength - division multiplexing (WDM) channel spacing and carry up to 50 Gb/s data rate per channel. In recent years, there is increasing interest in using dual - polarization (DP) technique to enable future systems with at least 100 Gb/s rate per channel to operate over existing optical networks. The performance of these advanced systems can be enhanced further by using coherent optical orthogonal frequency division multiplexing (CO - OFDM) technique which offers high spectral efficiency and outstanding tolerance of fiber dispersion.This thesis addresses the effect of fiber nonlinear optics on the performance of dual polarization CO - OFDM/WDM system operating with 100 Gb/s per channel. Different modulation formats, namely BPSK, QPSK and 16 - QAM, are used. First, the performance of a single - channel system is investigated in the absence and presence of fiber nonlinearity. The results are compared with those of a conventional (single - polarization) system to identify the key role played by the DP technique. The investigation is then extended to WDM systems incorporating DP - OFDM technique. The results reveal that the effect of fiber nonlinearity can be reduced or cancelled by using optimum transmitter laser power Popt. Further, the value of Popt is a function of transmission distance,number of multiplexed channels, and modulation formats. Popt of - 11, - 12, and - 5 dBm is needed for a ten - channel DP system operating with BPSK, QPSK, and 16 - QAM formats, respectively.Simulation results presented in this thesis are obtained using OptiSystem (version 11.1) which is a commercial software package.

الغاء تداخل المسا ارت التخميني في انظمة الوصول المتعدد باستخدام تقسيم الترميز الواسع الطيف لشبكات الاتصال اللاسلكية == Multipath Interference Cancellation Investigation In Wcdma Communication Networks

اسم المؤلف: نور محمد خليل
اسم المشرف: منال جميل الكندي
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Bit Error Rate (BER) and Bit Energy to Noise Ratio(?????????) performance of the 1 - D RAKE receiver without , with Space Time Transmit Diversity (STTD) and 2 - D RAKE without , with (STTD) and also without and with beamforming for WCDMA over RayleighChannel in presence of Additive White Gaussian Noise (AWGN) channel is demonstrated with purpose of making simulation of m - files developed in Matlab.Results are evaluated in terms of BER and ????????? considering the number of Base Station (BS) transmit antennas (1 - D RAKE and 2 - D RAKE receivers), and the number of RAKE fingers (1 - D RAKE receiver) and the number of Mobile Station (MS) receive antennas (2 - DRAKE receiver). The performance results of 1 - D RAKE and 2 - D RAKE receivers showed that the receivers have satisfactory BER performance and the performance of RAKE receivers is more improved by increasing the number of RAKE fingers, performance is even better when beamforming was applied.The performance results of the three receive diversity of 2 - D RAKE receiver schemes : Selection Combining (SC), Equal Gain Combining (EGC) or Maximal Ratio Combining (MRC)) of 2 - D RAKE showed that there are significant improvements in BER and ?????????performance over the 1 - D RAKE. BER of 10???? can be obtained at ????????? ? 5 dB performance with four fingers of 2 - D RAKE receiver with STTD and beamforming and MRC scheme for five receive antenna elements.

تحسين جودة الصورة التوموغرافية المعاد تركيبها باستخدام خوارزمية التسقيط العكسي المرشحة == Enhancement of Tomographic Image Quality Reconstructed By Filter Backprojection Technique

اسم المؤلف: دعاء نوفل حازم
اسم المشرف: محمد حسين الحياني
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Computed tomography refers to the imaging of slices of an object by exposing them to X - ray in different directions. Measurement of image quality is one of great importance in the field of medical applications. In applications such as CT and MRI scanning, most of the time the quality of reconstructed image is assessed qualitatively by radiologist or domain experts which are purely subjective evaluation.The FBP algorithm produces excellent quality and high performance reconstruction compared with other reconstruction algorithms. This thesis presents different projection types (fan beam geometry, and cone beam geometry) for the image reconstruction, the geometries are calculated analytically by specified 2D head phantom for fan beam and 3D head phantom for single slice spiral cone beam geometry with different ranges covering angle.In the thesis the FBP algorithm was applied with the fan beam and single slice geometries. Different types of filters (Hann, Hamming, Kaiser, Cosine, Ram - Lak, and Gaussian) are used in the algorithm and a new window filter is proposed in the algorithm. Comparisons are made between the new window and different common windows by quality measurement to get a reconstructed image with high quality and high performance suitable for the implementation of the FBP.A computer programs has been designed, written, and implemented in this work using MATLAB 7.1, for fan beam and single slice projections. Good results of quality and performance were obtained for the tomographic reconstructed image from its projection on CT scanner.

نظام الاتمتة المنزلية مبني على اساس شبكة المتحسسات اللاسلكية == Home Automation System Based On Wireless Sensor Network

اسم المؤلف: محمد قاسم شاكر
اسم المشرف: اسامة قاسم جمعة
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:

تصميم وتنفيذ نظام واي ماكس ذو المعيار باستخدام حقل المصفوفات القابلة للبرمجة IEEE 802.16d == Design And Implementation Of IEEE 802.16D Wimax Baseband System Using FPGA

اسم المؤلف: قاسم هادي كريم
اسم المشرف: محمود عبد القادر عبد الستار
السنة: 2014
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

تصميم وتنفيذ نظام العناية الصحية المتنقل في الاسعاف بالاعتماد على شبكة الانترنت == Design and Implementation of Ambulance Mobile Health System Based on Internet

اسم المؤلف: عبد الله علي جابر الحسيني
اسم المشرف: سمير جاسم محمد
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:

حساب الوثوقية في انظمة الاتصالات اللاسلكية == Reliability Evaluation For Wireless Communication System

اسم المؤلف: ياسمين عبد الغني اليوزبكي
اسم المشرف: اسماعيل محمد جابر
السنة: 2009
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

تحسين اداء انظمة الاتصالات الخلوية باستخدام MIMO - OFDM == Performance Improvement of Cellular Communication Systems Using MIMO – OFDM

اسم المؤلف: وسن ممدوح عبد اللطيف التتنجي
اسم المشرف: سامي محمد طاهر عبد الموجود
السنة: 2006
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: الموصل
الصفحات الاولى:

العلامة المائية السمعية للتطبيقات الطبية اعتمادا على تحويل هجين == Audio Watermarking For Medical Applications Based On Hybrid Transform

اسم المؤلف: هبة عبد الجليل كزار الاسدي
اسم المشرف: اسامة قاسم الذهب
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:

اتحاد الاحياء تحت انقاض البنايات باستخدام المنطق الضبابي == Detecting Trapped Alive Humans Under Buildings Ruins Using Fuzzy Logic

اسم المؤلف: نورا هاني شريف عبد العزيز
اسم المشرف: محي محمد جاسم العزاوي
السنة: 2012
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

Development Of Interprocess Communication Simulation For Distributed SCADA System

اسم المؤلف: نادية اسماعيل
اسم المشرف: sarkout N.Abdulla | Nazar AI rawas
السنة: 2006
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

محاكاة البصري المتشاكة لتقنية مازج تقسيمات التردد المتعامدة في نظام مازج تقسيمات الطول الموجي == Simulation Of Coherent Optical OFDM In WDM System

اسم المؤلف: مياسة رزاق عبد علي
اسم المشرف: ليث علي عبد الرحيم | ابراهيم عبد الله مرداس
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
1 ... 13 14 15 16 17 18