عرض: 25 50 75 100 النتائج

نتائج البحث: 25 من أصل 145

Astudy Of Con Centration Measurement Of Alpha And Gamma Emitting Radionuclides In Soil Of Wasit Governorate

اسم المؤلف: alwasity . abdullah swadi mdekil
الموضوع العام: علوم الفيزياء
السنة: 2010
الموضوع الدقيق: الفيزياء الذرية
الجامعة: جامعة بغداد
مكان الجامعة: بغداد
الكلمات الدلالية:
  • gamma

Physical Investigation Of Corrosion Protection Of Polymer Coated Steel In Concrete

اسم المؤلف: ahmed qasim abdullah
الموضوع العام: علوم الفيزياء
السنة: 2010
الموضوع الدقيق: الفيزياء
الجامعة: جامعة بغداد
مكان الجامعة: بغداد
الكلمات الدلالية:
  • polymers and polmerization

Design And Construction Of Dc Planar Magnetron Sputtering To Prepared Sethin Film

اسم المؤلف: Kadhim . abdulwahid aadim
الموضوع العام: علوم الفيزياء
السنة: 2010
الموضوع الدقيق: الفيزياء
الجامعة: جامعة بغداد
مكان الجامعة: بغداد
الكلمات الدلالية:
  • maghets

Aspectral And Structural Studies Of Cobalt - Phthalocyanine Copc

اسم المؤلف: Alragehey . asmaa star jeeiad mheesin
الموضوع العام: علوم الفيزياء
السنة: 2010
الموضوع الدقيق: الفيزياء
الجامعة: جامعة بغداد
مكان الجامعة: بغداد
الكلمات الدلالية:
  • spectral analysis

دراسة تاثير التشعيع على بعض الخصائص الفيزيائية للمركب (Sno2;Mg,Fe) المحضر كيميائيا

اسم المؤلف: عبد السلام محمود حسن
الموضوع العام: علوم الفيزياء
السنة: 2010
الموضوع الدقيق: الفيزياء
الجامعة: جامعة ديالى
مكان الجامعة: ديالى

تحضير البوليمر الموصل بولي (ارثوا - تولدين) ودراسة الخصائص البصرية والكهربائية له واستخدامه في تصنيع الخلايا الشمسية == PREPARATION OF CONDUCTING POLY (O - TOLUIDINE) AND STUDY OF ITS ELECTRICAL AND OPTICAL PROPERTIES FOR APPLICATION AS A SOLAR CELLS

اسم المؤلف: حسين فالح حسين اللعيبي
الموضوع العام: علوم الفيزياء
السنة: 2010
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: العربية
مكان الجامعة: البصرة
الصفحات الاولى:
المستخلص: The present study include the preparation of poly (O - Toluidine), by the chemical polymerization, then doped with HCl, and P - toluene sulphonic acid.The polymer solution deposited on glass, interdigitated finger electrode, and silicon wafer by the use of spin coating technique, in order to study electrical and optical properties as well as electronic applications in the fabrication of solar cells. The prepared samples were treated thermally before the measurement took place. Addition, a study was made of the effect of dyes on solar cells, (RhB, Flu, CuPc, and PbPc ) deposited on poly(O - Toluidine) and doped by p - toluene sulphonic acid (POT - PTSA). The thickness of the samples is measured by the use of Ellipsometry spectroscopy. The polymer thin films prepared were analysized by the use of (FT - IR) and Raman spectroscopes to determine the functional groups of the chemical bonds. To identify the nature, the structure of the surfaces of the prepared samples and to measured the partial size of the grain Atomic force Microscopy AFM insistent were used. The optical properties of the thin films prepared were studied including recording the absorption spectroscopy for wavelengths of (300 - 900 nm). The absorption coefficient and the forbidden energy gap to transmission directly were measured as well as the refraction index (n), extinction coefficient (k), dielectric constant ε, as well as, the optical constant represented by single oscillator energy (Eo), dispersion energy (Ed), moment of dielectric constant (M - 1, M - 1 3), non linear optical susceptibility (χ3) were determined.The electric conductivity was studied and it was found that the thin films correlate with the ohmic behaviour at the measured volts range (1 - 100V) for the polymers (POT, POT - HCl, POT - PTSA, and POMA). The effect of the temperature on the electric properties of these thin films is also studied. The study shows that the electric conductivity increases with the increase of temperature, where all the samples were found to show a negative thermal coefficient of resistance which is a characteristics of semi - conductive material.The effect of doping with HCl and p - toluene solphonic acid on electric conductivity was studied and found to increase to (2.46x10 - 5 S.cm - 1) while the conductivity of the polymer doping with HCl increases to (7.59x10 - 6 S.cm - 1) compared to the pure polymer (1.49x10 - 7 S.cm - 1). This study shows that the activation energy in the pure polymer is (0.313eV) and decreases when the polymer was doped with PTSA, HCl to (0.211 eV) and (0.235 eV) respectively.For the electronic application of prepared polymers (POT, POT - HCl, POT - PTSA, and POMA) a solar cells were constricted by using n - type silicon wafers and different electrode from gold and aluminium. The optical properties of the solar cell under the effect of the light equivalent to that of the sun and which falls vertically on the sample were studied ; it is practically found that, the highest efficiency obtained is (2.55 %) for the polymer (POTPTSA). The effect of thickness on the solar cell efficiency is also studied where it is found that the highest efficiency is about (2.55%) at thickness (35 nm). The electric properties of the solar cell were studied at different intensity (10,25, 50, 100) mW/cm2 and the efficiency reaches its maximum (4.88) when the intensity of the incident light is equal to 10 mW/cm2. It is observed practically that the efficiency of all cells decreases when dyes are added to the polymer (POT - PTSA). The exposure of the solar cell of the polymer (POTPTSA) to normal weather conditions was tudied for more than two monthswhere it is observed that the cell efficiency falls from 2.55 to 1.18 after two weeks of exposure. Then it reached constant value of 0.88 for two months of time exposure

تحضير مركب من (النحاس - الكرافيت) ودراسة خواصه الكهربائية والميكانيكية والحرارية == (Copper - Graphite) composite preparation and studying it's electrical, mechanical and thermal properties.

اسم المؤلف: مهدي محمود مطر
اسم المشرف: فاضل عطية جياد | ابراهيم رمضان عاكول
الموضوع العام: علوم الفيزياء
السنة: 2010
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا العمل, تم تحضير مادة متراكبه من النحاس والكرافيت باستخدام طريقة مسحوق المعادن (powder metallurgy method) وتم دراسة خواصها الفيزياويه والميكانيكيه والكهربائيه والحراريه.نسب مختلفه من الكرافيت كانت (40%,30%,20%,10%,5%) تم اضافتها الى مسحوق النحاس,كل النسب خلطت بعنايه مع (2%) من وزن المركب مع بولي فينول الكحول (polyvinyl Alcohol) كرابط.النماذج شكلت على شكل عينات دائريه ,ثم كبست تحت ضغط (55) ميكا باسكال ومن ثم عولجت حراريا بعد وضعها في انابيب من الكوارتز مفرغه حيث وضعت في فرن بدرجة حراره (900) درجة مؤية لمدة (4) ساعات حيث كان معدل درجة التسخين والتبريد هي (4.5) درجة مؤية لكل دقيقة .الكثافة الحجمية(Bulk density ) ) والفجوات الضاهرية(Apparent porosity) ومقاومة البلي(Wear rate ) ومعامل الاحتكاك(Friction coefficient ) والممانعه الكهربائيه(electrical resistivity) والتوصيليه الحراريه(thermal conductivity) درست.حيث كانت الكثافة الحجمية (3.24 - 6.1)غرام لكل سنتميتر مكعب لكل النسب من الكرافيت والفجوات الضاهرية (13.816 - 8.768) غرام لكل سنتميتر مكعب وكذلك معدل البلي لمختلف الاحمال (5,10,15) نيوتن كان يقل مع زيادة محتوى الكرافيت في المركب حيث كان معدل البلي (2.91x10 - 7 - 0.9x10 - 7) غرام لكل سنتميتر عند مسافه (6) سنتميتر لكل نسب الكرافيت وكذلك معامل الاحتكاك (0.562 - 0.590) ,الممانعة الكهربائية كانت (108x10 - 3 - 80x10 - 3) اوم لكل متر والتوصيليه الحرارية كانت (116.41 - 131) وات لكل كلفن متر لكل نسب الكرافيت.العينه (10%)كرافيت اختيرت افضل نموذج حيث كانت الفجوات الضاهرية لها (10.024) غرام لكل سنتميتر مكعب والكثافة الحجمية (5.13) غرام لكل سنتميتر مكعب ومعامل الاحتكاك (0.580) ومعدل البلي(2.58x10 - 7) ) غرام لكل سنتميتر عند حمل (15)نيوتن وممانعة كهربائية (80.2x10 - 3) اوم لكل متر وتوصيلية حرارية (128.37) وات لكل كلفن متر .مواد مختلفة مثل سليكون الكاربيد(SiC) واوكسيد اليثانيوم(( La2O3 ومسحوق الكالين(Kaolin) استخدمت كمواد تطعيم بنسب مختلفة اضيفت الى العينة (10%) كرافيت ودرس تاثيرها على خواص المركب حيث كان معدل البلي قد تحسن حيث اصبح (0.65x10 - 7) غرام لكل سنتميتر لعينة سليكون الكاربيد(SiC) (2.5%) وكذلك الصلادة ازدادت, (1%) من واوكسيد اليثانيوم(( La2O3 قللت معدل البلي الى (1.72x10 - 7) غرام لكل سنتميتروكذلك الصلادة ازدادت ,اضافة نسب مختلفة من الكالين الى المركب وخصوصا النسبة (5%) قد حسنت معدل البلي حيث وصل الى (2x10 - 7) غرام لكل سنتميتر مع زيادة للصلادة ايضا.معدل البلي ومعامل الاحتكاك درست باستخدام تقنية (pin - on - disk) حيث استخدمت ثلاثة احمال هي (5,10,15) نيوتن وعلى ثلاث مسافات هي (4,6,10) سنتمتر, بصورة عامه النتائج اظهرت ان معدل البلي يزداد مع زيادة الاحمال والمسافات | In the present work, copper - graphite composite is prepared by powder metallurgy method P/M, and studying their physical, mechanical, electrical and thermal properties.Different percentages of graphite (40 wt%, 30 wt%, 20 wt%, 10 wt% and 5 wt%) have been added to copper powder. Each percentage mixed carefully with (2) wt% of polyvinyl Alcohol (PVA) as a binder.Many samples as a disc have been compacted at (55) MPa, and then sintered in evacuated quartz tube at (900)oC for (4) hours where the heating and cooling was (4.5)oC per min. Bulk density, apparent porosity, wear resistance, friction coefficient, electrical resistivity and thermal conductivity of the composite have been study. Where the bulk density (3.24 - 6.1)gm/cm3 for all the percentage of graphite, and the apparent porosity was (13.816 - 8.768) gm/cm3 and wear rate at difference load (5,10 and 15)decreased with increasing graphite content, where the rate (2.91x10 - 7 - 0.9x10 - 7)gm/cm at distance (6)cm for all the percentage of graphite and friction coefficient was (0.562 - 0.590), electrical resistivity was (108x10 - 3 - 80x10 - 3)ohm. m, and thermal conductivity (116.41 - 131) w/k.m for all percentage of graphite.10 wt% graphite composite has chosen a best of samples where the apparent porosity was (10.024) gm/cm3 and bulk density (5.13) gm/cm3 and friction coefficient (0.586) and wear rate (2.58x10 - 7) gm/cm at (15)N as a load, and resistivity (80.2x10 - 3) ohm .m and thermal conductivity (128.37) w/k.m.Different materials such as SiC, La2O3 and Kaolin have been used as doping materials in different percentages to best sample prepared (10 wt% graphite) and studying their effect on the properties of this composite. The wear rate has been enhanced where it becomes (0.65x10 - 7) gm/cm for (2.5 wt% SiC) and the hardness has been increased. (1 wt% La2O3 ) has also decreased the wear rate to (1.72x10 - 7) gm/cm with increasing the hardness of the samples. Adding different percentage of kaolin to the composite specially (5 wt %) has enhanced also the wear rate where reach to (2x10 - 7) gm/cm and hardness increasing too. Wear rate and friction coefficient studying under dry sliding condition using pin - on - disk technique. Three loads (5, 10 and 15) N, where used at different distance effect (4, 6 and 10) cm from the center of disk. In general the results showed that the wear rate is increased with increasing the applied load and increased the distance

تاثيرات اشعة الليزر العلاجي واطئ القدرة على الخلايا الطبيعية والسرطانية من خلال تشعيع الغدة اللمفاوية للفئران

اسم المؤلف: مصطفى صالح علي الموسوي
اسم المشرف: تقي علي موسى الموسوي الواجدي | ناهي يوسف ياسين
الموضوع العام: علوم الفيزياء
السنة: 2010
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ان تقنية التشعيع باستخدام الليزر واطئ القدرة Diode Laser ذي الاطوال الموجية المختلفة له القابلية على احداث تغييرات بايولوجية وذلك من خلال انتقال طاقة الفوتون الى النظام البايولوجي المستهدف، وبسبب الاهتمام بموضوع تاثيرات اشعة الليزر المستخدمة في العلاج الطبي فان تاثير ضوء الليزر ذي القدرة الواطئة على نشاط الخلايا المناعية تمت دراسته على الخلايا المناعية المميزة (macrophages and T cells) في نماذج حيوانية. وان جميع التجارب المتعلقة بالبحث قد انجزت في المركز العراقي لبحوث السرطان والوراثة الطبية التابع للجامعة المستنصرية.تم فحص 180 نموذج من اناث الفئران البيضاء بعمر شهرين وذات معدل وزن 25± 5 غم في هذا البحث، وطبقا لبروتوكول العلاج بالليزر تم تقسيم الفئران الى مجموعتين، المجموعة السليمة (90 (n= والمجموعة المصابة بسرطان الغدة اللبنية((AM3 (90 (n=. تم تشعيع الغدد اللمفاوية العنقية ل75 فارة من كل مجموعة باستخدام ليزر القدرة الواطئة ذي الاطوال الموجية (830,780,670,635,532) نانومتر. كل خمس عشرة فارة من كل مجموعة قد تم تشعيعها من احد تلك الليزرات بواسطة توجيه حزمة الليزر الى الغدد اللمفاوية لتلك الفئران مرتين في اليوم الواحد لمدة 20 دقيقة وللفترات 5، 10، 15، 20 ،25 يوم على التوالي، بينما لم يتم تشعيع مجموعة اخرى مكونة من 30فارة وذلك لاستخدامها لاغراض المقارنة مع المجاميع المشععة وللفترات الزمنية نفسها. في نهاية التجربة، تم قتل جميع الفئران بعد نهاية الفترات 5، 10، 15، 20 ،25 يوم على التوالي، لاجراء التشريح وازالة الغدد اللمفاوية بهدف اجراء الفحص النسيجي واستخدام طريقة الفحص الكيميائي النسيجي المناعي (IHC)، CD3) و(F4/80 لدراسة تاثيرات الليزر على الخلايا المناعية التي يمكن تحفيزها لتحسين وظيفة الغدة اللمفاوية بهدف زيادة استجابة الجهاز المناعي، وبعدها يتم فحص العينات تحت المجهر الضوئي.من خلال تحليل النتائج التي تم الحصول عليها في هذا البحث، وجد ان الاطوال الموجية المختلفة للليزرات القدرة الواطئة يحفز خلايا الجهاز المناعي. ان تشعيع الخلايا المناعية باستخدام ليزر واطئ القدرة كان مصحوبا بتثبيط معنوي ملحوظ في نمو الورم وكانت اغلب الملاحظات عند الاطوال الموحية 635,670 نانوميتر.الخلاصة________________________________________ان معدل زيادة نسبة T cell (في الفئران الطبيعية) في اليوم الخامس والعشرين من فترة التشعيع هي 30% فقط، بينما كان معدل الزيادة في نفس هذا النوع من الخلايا وبوجود الخلايا السرطانية 107%. وان معدل الزيادة في نسبة خلايا (macrophages) في الفئران الطبيعية في اليوم الخامس والعشرون من فترة التشعيع بالليزر ذو الطول الموجي 635 نانومتر233% والتي تقارب بنسبة كبيره لمعدل الزيادة 237% في نفس هذا النوع من الخلايا وبوجود الخلايا السرطانية .ان تاثير الليزر ذي الاطوال الموجية 635 و670 نانومتر لازال واضحا على حجم الورم للفئران المسرطنة. في اليوم الخامس من التشعيع فان الليزر ذا الطول الموجي 635نانومتر فقط قادر على ان يسبب تثبيط معنوي ملحوظ (p<0.05 ) في حجم الورم، بينما في ايام التشعيع 10، 15، 20 فقط الليزرات ذات الاطوال الموجية 635 و670نانومتر قادرة على ان تسبب تثبيط معنوي ملحوظ في حجم الورم للفئران المسرطنة المشععة. ان الليزر ذا الطول الموجي 635 نانومتر كان له التاثير الاعظم على تثبيط حجم الورم للفئران المسرطنة اذا ما تمت مقارنته مع بقية الاطوال الموجية للفئات العمرية المختلفة.نستنتج من هذه الدراسة ان تحفيز الغدة اللمفاوية يعتمد على نوع الليزر المستخدم، حيث ان هناك علاقة بين الطول الموجي لليزر المستخدم مع زيادة عدد الخلايا المناعية عندما تكون الجرعة الاشعاعية متساوية لجميع الاطوال الموجية | Low level diode laser of different wavelengths is an irradiation technique that has the ability to induce biological changes by transferring the photon energy to the targeted biological system, because of the large interest in the field biological effects of laser radiation used in laser therapy, the effect of extremely low - level laser light intensity on the immune cell activity has been studied in the animal model with well - characterized macrophages and T cells. All the experiments of this study were performed in the laboratories of the Iraqi center for cancer and medical genetics research (ICCMGR). A total number of 180 female white mice of two months age and mean weight of 25 ± 5 g were examined in this project. According to the laser treatment protocol the mice were divided into two groups, normal (n=90) and adenocarcenoma inoculation (n= 90). The cervical lymph nodes of only 75 mice of each group were irradiated by different wavelengths LLL (532, 635, 670, 780, and 830) nm. Each of the 15 mice were irradiated by one of these lasers by directing the laser beam to the mice lymph node for 20 mins for a period of 5,10,15,20 and 25 days. This was done twice daily. While the other 30 mice were not irradiated to use them for comparison study with the irradiated groups for the same mentioned periods of time. At the end of the experiment, the animals were killed. Each mouse was fixed on the back of anatomical slab. The specimen (lymph node) after removal were taken for histo - pathology exam and the immunohistochemistry (IHC) method (markers CD3 and F4/80) was used to study the effects of lasers on the macrophages and T lymphocyte cells which can be stimulated in order to enhance the lymph node function, and as a Abstract________________________________________result, enhance the immune system response. Then, the slides were examined microscopically. Through the analysis of the data obtained from this study, it was found that different wavelengths LLL stimulated the immune cells (T and Macrophages), the irradiation of these cells with LLL was associated with a remarkable and significant growth inhibition most noticeably at laser wavelengths of 635 and 670 nm. The average increase in the percentage of T cells (in healthy mice) at the 25th day of exposure to 635 nm laser light was only 30% while the average increase of such cells in the presence of cancer cells was 107%. In contrast, the average increase in the percentage of macrophages (in healthy mice) at the 25th day of exposure to 635 nm laser light was 233% which was very close to the average increase (237%) in the presence of cancer cells. The effect of the laser wavelengths of 635 and 670 nm was still obvious on the tumor volume of cancerous mice. At the fifth irradiation day, the only laser wavelength of 635nm was able to cause a noticeable significant (p<0.05) decrease of tumor volume of the irradiated cancerous mice. While at the exposure days 10, 15 and 20 the only two laser wavelengths of 635 and 670 nm were able to cause a noticeable significant decrease of the tumor volume of the irradiated cancerous mice. The laser wavelength of 635 nm has the maximum significant decrease of tumor volume of cancerous mice in comparison with irradiation of other laser wavelengths at different age groups. As a conclusion for this study, stimulation of lymph node depends on the kind of the used laser. There was a relationship between the used laser wavelength and the increment in the number of the T - cells and Macrophages when the laser dose was uniform for all wavelengths.

بناء دوائر مشغل ليزر شبه الموصل المرئي لقياس المسافة == Driver circuit construction using visible semiconductor laser for distance measurement

اسم المؤلف: محمد فرحان راهي الدريساوي
اسم المشرف: بان رشيد علي
الموضوع العام: علوم الفيزياء
السنة: 2010
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: In this research study and construction of electronic circuits the ability of the laser (laboratory) are mediated by the semiconductor laser in the visible spectral response of the photon detector. (0.35 - 1.35) μm and the estimated circuit composed of the following : A - The transmission unit. B - A unit of receipt. T - Service counter. W - Department of calibration of the counter. C - Department of Qallab the counter to generate the highfrequencies to calculate the time. H - and the cargo unit. G - Department of lasers operating space. D - The department of central processing. All of these services are designed and run program brokered Multisium 2007. And the distance measured this ability is mediated. (100m) and will be equipped with a battery system and reloading as well as the lowest sensitivity possible capacity for the reflected radiation (0.11×10 - 9W)

اعتماد معامل التصادم على فقدان طاقة الايونات العنقوديه السريعه == Impact Parameter Dependence of Energy Loss of Fast Cluster Ions

اسم المؤلف: مثنى محمد محمود
اسم المشرف: خالد عبد الوهاب احمد | رياض خليل احمد
الموضوع العام: علوم الفيزياء
السنة: 2010
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Electronic of molecule and ionic clusters study are useful tools in both fundamental research of both material science and plasma physics. The effect of a cluster shown clearly deviatesin the sum of individual effects of each cluster component. Electronic energy loss and channelling of molecular clusters as a function of impact parameter are not so well understood which is according to the mono - atomic ions phenomena. The cluster stopping power can be theoretically treated by the united - atom model, which describes the cluster as an equivalent single atom, with atomic number and mass being the sum of atomic number and mass of each component. This model is limited to the very beginning of the interaction between cluster and the target.The present work describes the calculation of the impact parameter dependent energy loss for bar ions at high velocities, which reproduces full first order calculations for all impact parameters without large scale calculation. The physical inputs which be used the electronic density and the oscillator strength. Atomic units are used throughoutthe present work.This work describes an extension of the perturbative convolution approximation (PCA) model, based on the impact parameter method, for molecules and clusters namely MPCA (Molecular PerturbativeConvolution Approximation). MPCA gives the energy loss as a function of impact parameter taking in the consideration close and distant collisions.In the present work a simple formula for the electronic energy loss of bare ions, screened projectile and molecular cluster ions as function of impact parameter is described. Starting from first order perturbation theory and proposed three programs written in FORTRAN - 90. Using the physical inputs are the electron density and oscillators strengths of the atom. Good approximation has been done to avoid going in a complex numerical calculations and we obtained good agreement with previous works.An extension to the convolution approximation for the ionization probability, energy loss and energy loss straggling as a function of impact parameter for swift ions leads to write a program for the numerical calculations and then apply it on C - target to study the effects of sub - shell on the variation of impact parameter. , and sub - shells have a different effects on the energy loss and energy loss straggling.

دراسة المؤثرات على الاتصالات الليزرية تحت الماء == Study of the Effects on Underwater Laser Communications

اسم المؤلف: مازن علي عبد علي
اسم المشرف: محمد تقي حسين | كاظم حسن حسين الموسوي
الموضوع العام: علوم الفيزياء
السنة: 2010
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم تصميم وبناء منظومة ليزر للاتصالات تحت الماء. هذه المنظومة استخدم الدايود الليزري ذو الطول الموجي (532nm), هذه المنظومة تعمل على تحميل موجة صوتية على ضوء الليزر وارسالها من نقطة الى اخرى. حيث يتم ادخال الموجة الصوتية عن طريق اللاقطة التي تحولها الى اشارة كهربائية ثم تكبيرها وتضمينها. ثم يجهز التيار الى الثنائي الليزري ذي القدرة (50mw)عن طريق الترانزستور(MJ3055), ثم يتم ارسال الحزمة الليزرية خلال الماء واستلامها من الجهة الاخرى. استخدم انبوب من الزجاج نوع بايركس مغلق من الطرفين بواسطة نافذتين من الكوارتز. ان دائرة الاستقبال تعمل على تحويل الاشارة الليزرية الى اشارة كهربائية ضعيفة بواسطة الكاشف. هذه الاشارة تكبر ثم يتم فتح التضمين للحصول على الاشارة الصوتية التي تكبر باستخدام ال( (I.C 386 ويتم ارسالها عن طريق السماعة. في هذا العمل استعمل ثلاثة انواع من الاوساط المائية كاوساط ماصة للاشارة, تم تحقيق اتصال صوتي تحت الماء لمسافة (1m) ولثلاثة حالات : الاولى : في درجة حرارة الغرفة وكانت نسبة الاشارة الى الضوضاء (13.9dB) للماء المقطر, الثانية : باستخدام موشور نيكول حيث كانت نسبة الاشارة الى الضوضاء (dB12) للمستقبلة الاولى بينما كانت (11.4dB) للمستقبلة الثانية في الماء المقطر. الثالثة : في درجات حرارة مختلفة حيث كانت نسبة الاشارة الى الضوضاء (6.9dB) عند درجة حرارة (307K) بينما كانت (14.5dB) عند درجة الحرارة (333K). تم حساب معامل التوهين الحاصل لليزر المار خلال الماء (مقطر, حنفية, نهر). تم استخدام برنامج (MATLAB) لتحليل الحزمة الليزرية المرسلة والمنعكسة وملاحظة توزيع الشدة في ظروف مختلفة.وكذلك تم استخدام برنامج (ZEMAX - 7) الخاص بالتصاميم البصرية, لتصميم منظومة لمرور الشعاع الليزري خلال الماء ومنها تم حساب دالة الانتقال البصري, ومخطط البقعة الليزرية, والطاقة المتجمعة, وعدم التضليل في الشعاع | A design and construct underwater laser communication system have been studied. This system used diode laser of wavelength 532nm. It works by modulating sound wave on the laser beam and sending it away from point to another. The sound wave passed in a microphone and then converts into an electrical signal; this signal will be amplified and modulated. The resultant current is supplied to a laser diode (50mW) output through the transistor (MJ3055) and the laser beam allows passing through water and received from the other side. A tube of pyrex glass of length (1m) is used to contains two quartz windows. The laser power in receiver circuit is converted to a weak electrical signal using silicon detector. This signal is amplified and the audio frequency is separated from carrier frequency and then amplified using (I.C 386) a whole speakers. In this work three types of water medium have been used with different absorption signal. To satisfy a high quality sound communication link underwater for a distance about (1m) using the three following cases : • At room temperature : the signal to noise ratio S/N is (13.9) dB for distilled water, while (9.5) dB for tap water and (6) dB for river water. • Nicol Prism is used and the signal to noise ratio of (12) dB for first receiver while (11.4) dB for the second receiver in distilled water.• At different temperature : the signal to noise ratio S/N increase with increasing temperature is measured (6.9) dB in (307) K while (14.5) dB for river water at (333) K. The attenuation factor of laser beam which passing through three types of water (distilled, tap and river) have been measured. The intensity distribution of the incident laser beam and the reflected beam is computed and analyzed with matlab code, the changes in distribution of intensity of the transmitter pulse are compared with various conditions.Finally zemax 7 code is used, to design the optical system for the laser beam through the water, and calculate optical transfer function (OTF), spot diagram, encircled energy, and unvignetting rays

تصحيح القشرة وبلوخ العكسي المحسوبة من نظريات قدرة الايقاف لبور وبيتا

اسم المؤلف: كريم سهيل نجم عبد الله
اسم المشرف: رياض خليل احمد العاني
الموضوع العام: علوم الفيزياء
السنة: 2010
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا لبحث وضع الافكار النظرية الاساسية لحساب تصحيح القشرة باستعمال الانموذج الكمي(Bethe,1930 ) والانموذج الكلاسيكي( Bohr,1913) باستعمال النظرية الحركية(K.T. )Kinetic theory، انموذج المتذبذب التوافقي (H.O.)Harmonic Oscillator ، انموذج الغاز الالكتروني الحر (F.E.G ) Free Electron Gas model، والمعالجة الكلاسيكية للتصادمات القريبة والبعيدة للبروتونات في الاهداف الصلبة(Al,C,Si ) مع تاثير التبادل. حيث لاحظنا ان تصحيح القشرة في نظرية بور اكبر من تصحيح القشرة في نظرية بيـتا. كذالك تم حساب تصحيح القشرة للاغلفة الثانوية وتصحيح القشرة الكلي للبروتونات في الاهداف الصلبة(Al,C,Si) مع تاثير التبادل. تم في هذا البحث اجراء دراسة نظرية لحساب عدد الايقاف في نظرية بيتا للبروتونات في الاهداف الصلبة ((Al,C,Si مع تاثير التبادل بواسطة النماذج الذرية الثلاث (K.T., H.O., F.E.G). ففي العمل الحالي قمنا باجراء دراسة نظرية حول حساب عدد الايقاف وتصحيح بلوخ العكسي باستعمال النظرية الثنائية(B.T) في السرع الواطئة للبروتونات في السليكون مع تاثير التبادل وذالك لان تصحيح بلوخ العكسي يعتبر من التصحيحات المهمة لما له من اهمية في عملية الانتقال السلس ما بين المناطق ذات السرع الواطئة ( المناطق الكلاسيكية) والمناطق ذات السرع العالية(المناطق الكمية ). تم كتابة البرنامج الرئيسي(K.ube) بلغة الفورتران(Fortran 90) الذي تضمن كل الحسابات التقريبية والمباشرة للمعلمات اعلاه.

دراسة تاثير التركيزعلى الكفاءة الكمية لصبغة الفثالوسيانين - نحاس CuPc == Study of the effect of concentration on the quantum efficiency of copper - Phthalocyanine dye (CuPc

اسم المؤلف: كاترين كاظم شنشل
اسم المشرف: محمد تقي حسين | صبري جاسم لفتة
الموضوع العام: علوم الفيزياء
السنة: 2010
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: لقد تمت دراسة اطياف الامتصاص والفلورة للصبغة العضوية نوع الفثالوسيانين - نحاس(CuPc) في المذيب الدايوكسان, وتحت ظروف طبيعية عن(درجة حرارة الغرفة) وللتراكيز الثلاثة (5x10 - 5 , 1x10 - 4 , 2x10 - 4) مولاري. ان الشدة النسبية لطيفي الامتصاص والفلورة تزداد مع زيادة التركيز وهذا ينطبق مع قانون بير - لامبرت. ان جزيئة الفثالوسيانين((CuPc تمتلك حزمتي امتصاص في المنطقة المرئية وفوق البنفسجية من الطيف,حزمة الطاقة العالية تقع عند حوالي 350 نانومتر,وتعرف عموما باسم حزمة - B.بينما حزمة الطاقة الواطئة فتقع عند حوالي 650 نانومتر,وتعرف عموما باسم حزمة - Q.وقد بينت النتائج تاثير نقصان التركيز في ازاحة اطياف الامتصاص والفلورة الى الاطوال الموجية القصيرة .(Blue Shift) كانت كفاءة الكمية لـ (CuPc) عند التركيز الاول (2x10 - 4) مولاري في منطقة UV/visible 52%) و59%) على التوالي, وزمن العمر الاشعاعي (2.5071 و3.1802) نانوثانية وزمن عمر الفلورة (1.3036و 8763.1) نانوثانية على التوالي, وكانت كفاءة الكمية عند التركيز الثاني (1x10 - 4) مولاري 73%) و65%) وزمن العمر الاشعاعي (5.1426 و5.9717) نانوثانية وزمن عمر الفلورة (7540. 3 3.8816) نانوثانية وعلى التوالي, وكانت كفاءة الكمية عند التركيز الثالث (5x10 - 5) مولاري 83%) و74%) وزمن العمر الاشعاعي (6.2593 و7.6244) نانوثانية وزمن عمر الفلورة (5.1952 و5.6420) نانوثانية وعلى التوالي. دلت الدراسة لاطياف الامتصاص والفلورة للصبغة العضوية (CuPc) بان علاقة الكفاءة الكمية تتناسب عكسيا مع زيادة التركيز | The Absorption and Fluorescence spectra have been studied for organic dye Copper - phthalocyanine (CuPc) in solvent Dioxane separately under normal circumstances at (room temperature) for three concentration (2x10 - 4, 1x10 - 4, 5x10 - 5) M. The intensities of the absorption and fluorescence spectra are increasing with the increase of the concentration which agrees with Beer - Lambert Law. Phthalocyanine molecules (CuPc) have two absorption bands in the visible and ultraviolet region of the spectrum. The higher energy band, occurring at around 350 nm, is generally known as the B - band. The lower energy band, occurring at around 650nm, is generally known as the Q - band. The measurement shows that the Absorption and Fluorescence spectrum have shifted to short wavelengths (Blue Shift). The quantum efficiency of (CuPc) at (2x10 - 4 M) in UV/visible region is (qFM = 52% & 59%) respectively. While the radiative life time is (tFM = 2.5071 ns & 3.1802 ns) and the fluorescence life time is (tF = 1.3036 ns & 1.8763 ns) respectively. For the second concentration (1x10 - 4 M) is (qFM = 73% & 65%), (tFM = 5.1426 ns & 5.9717 ns) and (tF = 3.7540 ns & 3.8816 ns). For the third concentration (5x10 - 5 M) is (qFM = 83% & 74%) (tFM = 6.2593 ns & 7.6244 ns) and (tF = 5.1952 ns & 5.6420 ns).The quantum efficiency results appear to be increase with decreasing concentration.

المقاطع العرضية للانوية المركبة المتكونة من تفاعلات (n,p) و(p,n)

اسم المؤلف: فردوس سامي حسين الياسري
اسم المشرف: ايمان طارق العلوي
الموضوع العام: علوم الفيزياء
السنة: 2010
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The cross sections for (p,n) and (n,p) reactions were calculated according to the available International Atomic Energy Agency (IAEA) libraries and other experimental published data. The well known international libraries like EXFOR, ENDF, JENDL, JEF, JEFF, BROND, CENDL, contain some cross sections measured during the period from the middle of the last century up to several years ago.This study is concerned with the nuclear reactions used in the production of the protons or neutrons, which are important in shielding calculations, accelerators and proton therapy.The analyzing of a complete energy range has been done starting from threshold energy for each reaction. The cross sections are reproduced in fine steps of incident proton or neutron energy in 0.01 MeV intervals with their corresponding errors. The adopted cross sections for all available experimental data have been calculated for all the considered reactions. A mathematical representative equation for all these reactions is formulated. These equations represent the variation of the cross section with energy, which could be used to predict the values of uncalculated cross sections.The cross sections of light elements like Tritium , Helium , Lithium isotopes ,Berlium , Boron isotopes , Carbon , Nitrogen , Oxigen , Alaminum , Silinum isotopes , , , and Phosfor in specific reactions were considered. The calculation of the adopted values for (p,n) and (n,p) reactions have been done and compared with international libraries which give good agreements.The (n,p) reactions cross sections values are derived from the data of (p,n) reactions and visa versa as a function of neutron or proton energy, respectively, by using the reciprocity theory and the principle of reverse reactions for the ground state.The stopping power according to Zeigler formulae was used in order to obtain the neutron yield for each reaction. Q - value, threshold energy, binding energy, compound nucleus cross sections, transmitted wavelength and the probability of occurrence of the reaction have been also calculated.The programmes of adopt.m, reverse.m, stop.m, yield.m, and cnpw.m have been built for the first time in the present work using Matlab 7.0 to calculate the results of the present work, as well as SRIM (2003) program.The evalutated (p,n) and (n,p) cross sections which are used for the first time, in spite of the numerous data available, a limited number of studies concerning the light elements with very small half life are still very important in nuclear technology. They prove that our calculated values are in good agreement with the published data.

دراسة متانة الربط الانتشاري بين السيراميك والمعادن في الحالة الصلبة == Investigation of the Relaibility of Diffusion Bond Strength Between Ceramic - Metals in Solid State

اسم المؤلف: اروى غازي ناجي الطائي
اسم المشرف: زاريه ازات سركيس | ثامر عبد الجبار جمعة
الموضوع العام: علوم الفيزياء
السنة: 2010
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

دراسة تعجيل الالكترونات باستخدام تفاعل الليزر مع البلازما الممغنطة للاتصادمية == Study of Laser Acceleration of Electrons in a Magnetized Collisionless Plasma

اسم المؤلف: امال محمد كنيوي العكايشي
اسم المشرف: خالد عباس يحيى | محمد عبد الزهراء حبيب
الموضوع العام: علوم الفيزياء
السنة: 2010
الموضوع الدقيق: فيزياء الالكترونيات
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: A theoretical and computational investigation was carried out in the field of laser - plasma interaction using the Finite Difference Method to study the acceleration of electrons with non - relativistic velocities in a non - magnetized and magnetized collisionless plasmas.First, a (Nd : YAG) laser pulse of 25 fs duration and 5x1015 W/cm2 intensity was assumed in the present study.When this laser pulse was allowed to interact with a stationary electron in vacuum, it was found that the electron is accelerated during the interaction only and returns to stationary state after the laser pulse has passed, in agreement with previous works.Also, the interaction of the same laser pulse with a collisionless plasma at electron density ne= 1x1018 cm - 3 was studied. It was noticed that the energy of the electron during the interaction has reached a maximum value of ~ 1 keV at laser pulse intensity of 5x1015 W/cm2, while the energy of the electron after the interaction reached ~ 15 eV for the same laser pulse intensity.Finally, the interaction of the same laser pulse with a plasma was studied at electron density ne=1x1018 cm - 3 in the presence of an external magnetic field for the three values of the field strength B= 60 MG, 70 MG and 80 MG. It was found that there is an increase in the acceleration of the electron to reach a maximum energy of ~ 19 keV at a laser pulse intensity of 5x1015 W/cm2 and an applied external magnetic field strength of 80 MG during the interaction. However, the electron energy after the interaction reached ~ 3 keV at a laser pulse intensity of 5x1015 W/cm2 and an applied external magnetic field strength of 70 MG. This is due to a sustainable generated laser wakefield of ~ 2x109 V/cm. Thus, it is concluded that an applied external magnetic field assists the acceleration of the electron and can subsidize for a high laser beam intensity

محاكاة العين البشرية باستخدام الخوارزمية الجينية == SIMULATION OF HUMAN EYE USING GENETIC ALGORITHEM

اسم المؤلف: لؤي عبد الصاحب رسول الطائي
اسم المشرف: سهى موسى خورشيد الاوسي | محمد صاحب الطائي
الموضوع العام: علوم الفيزياء
السنة: 2010
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The aim of this research is simulate an optical system for the human eye using Genetic algorithm. The considered optical characteristics of the optical system simulator include spot size (Z), spot diagram, and effective focal length (EFL). These characteristics are determined with the aid of some mathematical relations, which give the efficiency and accuracy of the adopted optical system design. The work has been performed in two stages : In the first stage, Genetic Algorithem optimization (GA) is used to get the best design by optimizing the optical featurs of the eye elements. The optimal eye design was tested using Zemax software, the test includes estimation of the image quality, and optimal performance for the proposed optical eye system.The second stage was implementing a specially developed software to simulate the behavior of the human eye. The simulator using visual basic 6 and works under Windows operating system, it is able to plot the eye design graphically, and can estimate the considered optical functions to determine the efficiency of the eye simulator.The simulator showed agood results for spot size, spot diagram and EFL, the present work has been gained some credibility when the considered optical functions achieved by the simulator are found compatible with those achieved by Zemax, since the comparison showed a behavioral matching between them, which ensure the correct path of the GA based eye design and the successful proposed eye design.

دراسة الفجوات المصنعة بهيئة عيوب بواسطة الاشعة السينية لمصبوبة المنيوم ومفاصل لحام الفولاذ == X - ray Radiographic Study of Simulated Voids - Like Defects in Aluminum Casting and Welded Joints in Steel

اسم المؤلف: فرقد رشيد سعيد الزبيدي
اسم المشرف: مازن فضيل محروك | ثامر عبد الجبار جمعة
الموضوع العام: علوم الفيزياء
السنة: 2010
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: This project investigates the detection and evaluation of imperfections in internal structures of castings and welded joints by x - ray radiography. Optimum radiography conditions that lead to clear and high contrast image on the radiograph were studied.Equations derived earlier for finding the size and depth of defects in castings were used in this project to test their applicability to a wide range of geometrical parameters used in radiography.The importance of non - destructive testing NDT in industry is discussed. X - ray radiography being one of the NDT techniques, has some privilege over other techniques. For example, welded joints sometimes contain internal flaw or blowholes that may escape detection by other NDT techniques but can not escape detection by x - rays. Two kinds of samples are prepared for radiography. The first sample is aluminum casting through which two different sizes of steel spheres are included. This sample was radiographed from two opposite sides and the x - ray films were analyzed.The second sample is steel plates which are welded by arc welding and then radiographed by x - rays.Imperfections in this sample such as incomplete root penetration, undercut and porosity were detected by x - ray radiography. Different conditions influencing the preparation and radiography of the above samples were studied. The prepared welded sample was radiographed three times for different high voltages (120,140,160) kV respectively with an exposure time of (80) second. The best quality image where the defects can be detected clearly if its size is (5%) of the radiographed object using (120) kV and (140) kV. Moreover the results show that the optimum film gradient was found at (140)kV and the contrast is better than obtained with (120)kV while darkening image was found at (160)kV.In field of the aluminum casting, the two equations were derived earlier proved their capabilities as a right method for identification each of size and depth of such defects in castings and welded joints

دراسة النشاط الاشعاعي الطبيعي للمخلفات النفطية == A study of the natural radioactivity of thepetroleum waste

اسم المؤلف: عصام محمد رشيد درويش
اسم المشرف: ندى فاضل توفيق | كريم خلف محمد
الموضوع العام: علوم الفيزياء
السنة: 2010
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The aim of this study is to detect the radioactivity of radionuclides and measure the specific activities and the uranium concentration in (30) samples of crude oil and oil waste were brought from three oil locations Dora refinery, Bijie refinery, and north field of al - Rumaila. The measurements in this study were done by using two techniques : 1 - Gamma rays spectroscopy system was used to measure the specific activity for radionuclides. This system is consist of high purity of germanium detector (HPGe) with personal computer as multi channel analyzer (MCA) that computerized to plot the radioactive spectrum and compute the specific activities of the radionuclides. There are seven radionuclides are detected : (Bi - 214, Ra - 226, TI - 208, Bi - 212, Pb - 212, K - 40, and Cs - 137), these radionuclides included; two radionuclides (Bi - 214,Ra - 226) belong to the U - 238 series, three radionuclides (TI - 208, Bi - 212, Pb - 212) belong to Th - 232series, one natural radionuclide (K - 40), and one artificial radionuclide (Cs - 137).For Dora refinery samples, the averages of specific activities of (Bi - 214, Ra - 226) were (7.79, 16.08) Bq/kg respectively, the averages of specific activities of (TI - 208, Bi - 212, Pb - 212) were (7.95,4.05,5.75) Bq/kg , the average of specific activities of (Cs - 137) was (0.64) Bq/kg , the average of specific activities of (K - 40) was (99.3) Bq/kg. For Bijie refinery samples, the average of specific activities of (Bi - 214)was (0.39) Bq/kg, the averages specific activities of (Bi - 212, Pb - 212)were (0.02,0.01) Bq/kg, the average of specific activities of (K - 40) was(2.28) Bq/kg , and three radionuclides (Ra - 226, TI - 208, and Cs - 137) werenot appeared in Bijie samples.2 - solid state nuclear track detectors technique (SSNTDs), the uraniumconcentration determined by using CR - 39 track detector and fissionfragment track technique, the nuclear reaction used as source of uraniumfission fragment is U - 235 (n - f) obtained by the bombardment of U - 235with thermal neutrons emitted from (Am - Be) neutron source with flux(5000 n/cm2.s) for seven days, the concentration were calculated bycomparison with the standard samples.The uranium concentration in Dora refinery samples were rangedbetween (0.95 - 3.34) ppm with average (2.03) ppm for solid samples and(1.25) ppm for liquid samples.The uranium concentration in Bijie refinery samples were ranged from(0.42 - 1.46) ppm with average (0.55) ppm in the solid samples and (1.24) ppm in the liquid samples.The uranium concentration in the north field of al - Rumaila samples were ranged between (1.78 - 6.35) ppm with average (3.37) ppm.From above results, we concluded that the maximum of uranium concentration was found in the north field of al - Rumaila in Basrah governorate, these results are agreement with the permissible limit from IAEA. The maximum of external equivalent dose rate from NORM in oil waste was found in the north field of al - Rumaila was (0.30) mSv/y less than the permissible limit from IAEA which is (1) mSv/y for the public.

التركيب الالكتروني لبلورات الجرمانيوم النانوية باستعمال نظرية المبادئ الاساسية المحددة لهارتري - فوك == Electronic Structure of Germanium Nanocrystals Using Ab Initio Restricted Hartree - Fock Theory

اسم المؤلف: نور هادي عيسـى
اسم المشرف: مضر احمد عبد الستار | احمد محمود عبد اللطيف
الموضوع العام: علوم الفيزياء
السنة: 2010
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: تم استعمال طريقة المبادئ الاساسية المحددة لهارتري - فوك وتقريب خلية الوحدة الكبيرة لمحاكاة تاثير الحجم على بلورات الجرمانيوم النانوية ولقد تم دراسة خمسة احجام من الذرات هي8 و16 و54 و64 و128 ذرة وتحديد التركيب الالكتروني وبعض الخصائص الفيزيائية لتلك البلورات النانوية لجزئي القلب والسطح مثل فجوة الطاقة وطاقة الترابط والثابت الشبيكي وعرض حزمة التكافؤ لشكلين هندسيين المكعب ومتوازي المستطيلات. ان طاقة الترابط تزداد بزيادة حجم القلب وصولا الى القيمة 10.79 الكترون فولت وهذه القيمة تمثل ضعف القيمة العملية تقريبا. بينما فجوة الطاقة تقل مع زيادة حجم القلب وتصبح قريبة من القيمة العملية عند اضافة تاثير السطح وقد وجد ان القيمة 0.29 الكترون فولت لـ 64 ذرة والتي تشير الى نصف القيمة العملية ونتوقع الحصول على قيمة دقيقة عند دراسة عدد اكبر من ذرات السطح. ولقد اخذنا بالحسبان التاثيرات النسبية وتصحيح الطاقة بالنسبة لنقطة الصفر. كما ان ادخال تاثير السطح المؤكسد(001) ذو الابعاد (1×1) وحسب الحصر الكمي فان السطح يعمل على تقليل فجوة الطاقة وزيادة عرض حزمة التكافؤ وهذه النتيجة تتفق مع اغلب البحوث النظرية. اما حزم التكافؤ فانها تكون اكثر عرضا عند السطح نتيجة لفصل المستويات الطاقية ووجود ذرات الاوكسجين.كما ان ثابت الشبيكة بقيمة 0.54 نانومتر يتفق بصورة جيدة مع القيمة العملية. تلك الخصائص تبدو اكبر من تلك المحسوبة بطرائق شبه تجريبية والتي تستخدم الاهمال التام للتداخل التفاضلي لانها تحسب كل التكاملات. ولقد بينت النتائج ان حالات السطح تكون قليلة التحلل بسبب عدم استمرارية السطح ووجود ذرات الاوكسجين | Ab initio restricted Hartree - Fock (RHF) method coupled with the large unit cell method (LUC) is used to simulate five sizes of Ge nanocrystal (8, 16, 54, 64, and 128) atoms and determine the electronic structure and physical properties of these nanocrystals with core and surface parts such as energy gap, cohesive energy, lattice constant, and valence bandwidth for two geometrical shapes : cubic and parallelogram. Cohesive energy increased with the core size reaching the value ( 10.79 eV) which represent approximately twice the experimental value, whereas energy gap decreased as the core size becomes near from the experimental value when we add surface effect so we obtain the value (0.29 eV) for 64 atoms which equals half the experimental value and we expect that we have an accurate value when we study high number of surface atoms. We take into account relativistic and zero - point corrections. The introduce of oxygenated (001) - (1×1) surface is effected and according to quantum confinement reduced the energy gap and enlarged valence bandwidth of (20.29 eV) greater than that of bulk and in agreement with most theoretical researches. Valence bands are wider on the surface part due to the splitting of energy levels and oxygen atoms. lattice constant with 0.54 nm is in good agreement with the experimental value. These properties seem to be larger than that obtained from semiempirical methods using the complete neglect of differential overlap (CNDO) cause it computes all integrals. The results show that the surface states are found mostly few - degenerate because of the effect of surface discontinuity and oxygen atoms

توظيف اشعة اكس لدراسة تاثير الحجم الحبيبي للنحاس وبعض سبائكه على معاملات التوهين == Implementation of X - Ray for Studying The Effect of Grain Size for Copper And Some of Its Alloys on Coefficients Attenuation

اسم المؤلف: عمر فاضل عبد الله علي
اسم المشرف: رائد نجيب رزوقي | فريد مجيد محمد
الموضوع العام: علوم الفيزياء
السنة: 2010
الموضوع الدقيق: علوم الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: صلاح الدين
الصفحات الاولى:
المستخلص: تـم تـحضير عـينات من الـنحاس وسبيكتين مـن سـبائكه الاولـى بنسب تـراكيز (70 % Cu +30 % Zn) والثانية بنسب تراكيز (70 % Cu + 15 % Zn + 15 % Al) وبسماك مختلفة واجريت قياسات التوهين لهذه العينات لمدى الفولتيات (20, 25, 30, 35) KV وذلك باستخدام وحدة الاشعة ا | The Copper sample and two of its alloys, the first is (70% Cu + 30% Zn) and the second is (70% Cu + 15% Zn + 15% Al) were prepared for different thicknesses and the attenuation measurements were made for the said samples by using X - ray unit with Mo - tu

معالجة تحليلية لتاثير المصادر الضوئية المختلفة على صور الكاميرا الرقمية في الهاتف النقال == Analytical processing for different optical sources for cell-phone digital camera photos

اسم المؤلف: هالة نصير كاظم الهاشمي
اسم المشرف: علي عبد داود الزكي | كاظم جواد الشجيري
الموضوع العام: علوم الفيزياء
السنة: 2010
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

دراسة قوى الانتقال ?|M(E2)|?^2لاشعة كاما كدالة للعدد الذري 18 ?Z?44 == The Study Of Transition Strength |M(E2)|2 For Gamma - Rays As A Function Of Atomic Number 18 ?Z?44

اسم المؤلف: حسين علي جان ميران
اسم المشرف: فاطمة عبد الامير جاسم
الموضوع العام: علوم الفيزياء
السنة: 2010
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
1 2 3 4 ... 6