عرض: 25 50 75 100 النتائج

نتائج البحث: 25 من أصل 75

تصميم متحسس مايكروويف باستخدام برنامج محاكاة التصاميم عالية التردد Design and Simulation of Resonant Microwave Sensor Using HFSS

اسم المؤلف: محمد زاحم حسن لهيمص
اسم المشرف: سعد طالب حسون فاضل علوان الحلي
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:

التاثيرات الكهربائية والبصرية لتشويب اغشية اوكسيد الخارصين (ZnO) المكونة لمتحسس الاشعة فوق البنفسجية بالفضة Electrical And Optical Effects Of Ag Doped ZnO Thin Film Based MSM UV Photodetectors

اسم المؤلف: محمد وسام ناجي
اسم المشرف: منير عبود هاشم غصون محسن علي
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يستخدم اوكسيد الخارصين (ZnO) لكشف الاشعة فوق البنفسجية وذلك لكبر فجوة الطاقة وكبر طاقة اثارة الربط لهذا الشبه موصل. اوكسيد الخارصين كذلك يمتلك سرعة اشباع عالية وفولتية انهيار عالية. في هذا العمل تم تصنيع متحسس اشعة فوق بنفسجية نوع (معدن - شبه موصل - معدن) با | Zinc Oxide (ZnO) has been commonly used for ultraviolet detection due to large band gap and excition binding energy. ZnO has high breakdown electrical field, also has a much larger saturation velocity. In this work three ultraviolet Metal Semiconductor Metal (MSM) photodetectors were fabricated, based on ZnO and Silver (Ag) doped Zinc Oxide (SZO) with (2% and 4 % doping ratios) thin films. The technique used to prepare the thin films was sol - gel and spin coating technique by using Si (100) p - type. Silver interdigitated (IDT) electrodes were deposited on the films by a vacuum coating deposition technique to form the three devices.The electrical properties for the fabricated photodetectors (PDs) were studied using Semiconductor Characterization System (SCS) at room temperature ( 27 C^o). The applied voltage was in the range of ( - 5 to 5) V.The SEM images showed a non - uniform distribution of the Ag dopants, these dopants formed clusters and these clusters increased as the amount of Ag dopants increased. The mobility, carrier concentration, and roughness for the SZO films increased when compared to undoped film. The optical bandgap and the transmittance are decreased when the doping ratio is increased. The saturation current (I - S) was decreased by a factor of 4, and 12 for the devices based on Ag doped ZnO (with 2% and 4 % doping ratios) thin films, respectively. The sensitivity was significantly increased with increasing the doping ratio. This enhancement attributed to the roughness of the Ag dopants (clusters). The detectivity was increased for the devices based on SZO films. The high detectivity with low saturation current made the devices based on SZO films suitable for optoelectronic applications and integrated circuits. From the experimental data and analysis, it was found that the PD with ZnO : Ag 4 % doping ratio has higher responsivity and gain of 0.523 A/W and 257 , respectively. This is confirmed by thin film and device characterization which makes this PD suitable for UV detection purposes.

استخدام اغشية اوكسيد الخارصين (ZnO) الرقيقة في متحسس لتركيز الهيدروجين من نوع ترانزستور تاثير المجال ممدود البوابة Zinc Oxide Thin Films - Based Extended - Gate Field - Effect Transistor (EGFET) As Ph Sensor

اسم المؤلف: علي عزام عبد اللطيف
اسم المشرف: رعد حمدان ظاهر غصون محسن علي
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ظهر في السنوات الاخيرة اهتمام ملحوظ في استخدام متحسسات تركيز الهيدروجين (الرقم الهيدروجيني) من نوع ترانزستور تاثير المجال (FET) في التطبيقات الطبية الحيوية مثل دم الانسان, اليوريا واللعاب لان عملية تصنيع متحسسات تركيز الهيدروجين تتجه نحو التكلفة المنخفضة | In recent years, there is noteworthy interest in using pH - sensors based on Field Effect Transistor (FET) in biomedical applications such as human blood, urine, and saliva because the fabrication of pH - sensors is tending toward low cost, small size, disposable, and real - time measurement. In this work, Extended Gate Field - Effect Transistor (EGFET) pHsensors were built using thin films of Zinc Oxide (ZnO) doped with Palladium (Pd) as sensing membranes. The Pd - doped ZnO thin films with different molar concentrations (Pd = 0%, 2% and 4%) were deposited onto p - type Si(111) substrate by sol - gel method. The surface morphology of the prepared films was imaged and studied by Atomic Force Microscopy (AFM) and Scanning Electron Microscopy (SEM). The crystal structure of the fabricated films was examined by X - Ray Diffraction (XRD) test. The optical and electrical characteristics of the films were measured using spectrophotometer and Hall - Effect measurement device, respectively.The EGFET pH - sensor has been prepared by linking the fabricated sensing devices to the gate terminal of a commercial Metal - Oxide - Semiconductor Field - Effect Transistor (MOSFET CD4007UB).The fabricated sensing devices were immersed in buffer solutions with pH range of (pH 3 ? pH 11). The pH sensing characteristics of ZnO and Pd - ZnO/silicon EGFET devices were studied using Semiconductor Characterization System (SCS - Keithley 4200).The ZnO EGFET sensor exhibits voltage sensitivity and linearity of 31.5 mV/pH and 0.9809 (or 98.1%) in linear regime with pH range of (pH 3 - pH 11). The voltage sensitivity and linearity of Pd - doped ZnO (with 4% molar concentration of Pd) EGFET device in the linear regime with pH range of (pH 5 - pH 11) are 27.86 mV/pH and 0.9785 (or 97.85%), respectively. The experimental results show that the Pd - doped sensing films by sol - gel method cannot be adopted for whole pH range. This means that the doped films have fewer amounts of H+ ions sensing sites at its surface than undoped ZnO fims.

تصميم شبكة استشعار لاسلكية متينة لمراقبة استهلاك الطاقة Robust Wireless Sensor Network For Energy Monitoring

اسم المؤلف: حيدر عبد الحميد محمد جواد العبيدي
اسم المشرف: حكمت نجم عبد الله طارق محمد سلمان
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: There has been a quick development in the Wireless Sensor Network (WSN) field that promises to revolutionize the way people lives. Where they have a wide range of applications especially in the monitoring applications like power consumption, military, and healthcare. This thesis has three objectives. First, to design and implement a prototype of WSN for monitoring power (as well as temperature) in buildings. Second, to investigate the bounds of coverage in different building construction materials. Third, to evaluate the amount of improvement introduced to the ZigBee transceiver when channel - coding methods are used.The basic design elements of the implemented power and temperature monitoring system includes current sensors, temperature sensors, microcontrollers, and wireless transceivers implemented using Global System for Mobile Communications/General Packet Radio Service (GSM/GPRS) platform and ZigBee technology. The use of GSM/GPRS platform allows the user to control or gather information about the system from anywhere just by sending a request using Short Message Service (SMS). In addition, the measured data can be visualized through a user friendly Graphical User Interface (GUI). Many measurements have been done to find the exact limitation of the designed system in terms of coverage and signal strength in the presence of objects of different materials including; cardboard, metal, concrete bricks, wood and corkboard. Furthermore, the MATLAB Simulink model of the proposed ZigBee transceiver uses Convolutional Coding (CC) at different code rates to improve the performance in AWGN channel, Rayleigh and Rician multipath fading channels.The results indicated that the use of ZigBee based WSN in electric power monitoring provides flexibility and helps in reducing power consumption. In addition, the experimental results show that the construction materials of buildings have varying impact on the network performance. At 4m distancebetween the base station and the sensing node, the losses in signal strength are 15, 20, 21 and 32 dBm when using metal as compared with cardboard, corkboard, wood and concrete bricks respectively.It is observed from the simulation results that using convolutional coding in ZigBee transceiver gives better performance than the traditional ZigBee transceivers and that the convolutional code of code rate 1/8 gives the best performance compared to other CC. In AWGN channel and at BER of 10 - 4, the maximum performance improvements in terms of BER obtained over traditional system are 14dB and 13.5dB for OQPSK and BPSK (868 - 900MHz) based ZigBee respectively. While these improvements are 23.5dB, 40.5dB and 19.5dB, 12.5dB in Rayleigh & Rician channels at the same BER respectively.

تعديل التشويه في الصور الرقمية باستخدام خارطة التشويه والمرشحات الضبابية Correction Of Deformed Digital Images Based On Deformation Map And Fuzzy Filters

اسم المؤلف: ايهاب ابراهيم كاظم
اسم المشرف: ظافر رافع زغير محمد علي توفيق
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: During the last decades the development in digital image acquisition, capturing, processing and displaying devices is one of the fastest growing fields. Most of these devices introduce some amount of geometric lens deformation and cause uncorrected dimensions in displaying the objects, such as cameras, scanners, lenses, and mirrors.This work introduces a general algorithm use to correct the images deformed by a fixed and known properties sources. A simple prototype system consists of convex mirror and digital camera has been constructed to capture the required reflected scene. The proposed algorithm considers three main processes; correction, filtering, and edge enhancement. The idea of the proposed correction method is based on selecting an original image, capturing its reflected view from the convex mirror, and then obtaining the deformed ratios for each row and column between the captured image and the original image. These ratios represent the raw components to what referred here as the deformation - map. This map is considered as a general pattern for the proposed prototype system, to be used later in correcting the deformed images.The correction process depends mainly on stretching - padding - cropping. In the first operation, each row and column is stretched to a length depends on the corresponding compression ratio's element in the deformation - map. The second operation modifies the size of the image by adding pad array to the end sides, while the third operation crops the image to the required size.The Filtering, and edge enhancement processes are based on using fuzzy median filter to deblur and smooth the corrected images, while fuzzy edge detection is used to enhance the edges of corrected images.The deformation - map has been examined on correcting several deformed images. The results show high capability of considering this map as a general correction model for the images captured by the proposed system.

موثوقية نقل بيانات بمعدل عالي باستخدام متعدد المداخل والمخارج لقناة متعددة المسارات Reliability Of High Data Rate Using MIMO For Multipath Channel

اسم المؤلف: ايمان احمد فرحان
اسم المشرف: رعد حمدان ظاهر محمود فرحان مصلح
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The most important type of MIMO is the Spatial Multiplexing (SM) which is used to increase the data rate depending on the number of transmitted and received antennas. The main challenge of SM is high Bit Error Rate (BER) at low Signal to Noise Ratio (SNR), which leads to increase the power expended, and this not match the modern requirements of communication system.In this thesis, the performance of MIMO system for Space Time Block Code (STBC) and SM has been investigated. As expected the STBC increase the reliability of data rate while SM increase the data rate with significant BER. Three types of detection have been experimented with SM; Maximum Likelihood (ML), Minimum Mean Square Error (MMSE) and Zero Forcing (ZF). The results show that ML is outperform each MMSE and ZF, but as it is known the complexity of ML increase exponentially with number of antennas and modulation order. ZF is simple one, but it has poor performance.The proposed system is to add channel code serially with SM and maintain the low complexity. The experiments are begun with Convolution Code (CC) to support SM performance. The results show that significant improvement is achieved using this code with ZF detection, it can be getting more than 10 dB of SNR as code gain. But the payment is the redundancy information which can be reduced by using puncturing technique. Also the complexity of Viterbi decoder grows exponentially with large constraint length. The second code is a Low Density Parity Check (LDPC) code which is proposed with suitable parameters to reduce the required iterations in order to achieve real time application for such system. The results confirm that the proposedscheme is outperform the CC by 3 dB of SNR in addition to acceptable complexity and less number of iterations

تصميم ومحاكاة نظام اتصالات امن يرتكز على النظام الفوضوي عبر قناة كاوس الضوضائية Design And Simulation Of Secure Communication System Based On Chaos Over AWGN Channel

اسم المؤلف: امير كاظم جواد
اسم المشرف: حكمت نجم عبد الله سعد سفاح حسون
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: مع زيادة التطور الكبير الذي يحصل في علم الاتصالات ومع وجود قناة عامة (public channel) تنتقل من خلالها المعلومات زادت المشاكل التي تخص القناة وبالخصوص مشكلتين رئيسيتين هما انتهاك الخصوصية ووجود الضوضاء. بخصوص امنية الاتصال : بما ان القناة عامة وبامكان اي م | With the significant development in communication systems especially with the public channel through which information travels, there are increasing in the channels problems. Among these problems, the two important should be addressed are the information security and the noise. In this thesis, an efficient communication system with high security and high immunity against noise has been proposed. From security perspective, the proposed scheme uses two levels of encryption based on chaotic systems. The first level is chaotic scrambling, while the second level is chaotic masking. Two levels of chaos based encryption make information very secure during their transition in the channel because the key space becomes too large. The simulation results show that the Segmental Spectral Signal to Noise Ratio (SSSNR) of the first level (chaotic scrambling) is reduced by - 5.195 dB in comparison with time domain scrambling. In the second level (chaotic masking), the SSSNR is reduced by - 20.679 dB. It is also show that when the two levels are combined, the overall reduction obtained is - 21.755 dB.Concerning the immunity against noise, the proposed system offers three methods to reduce the effect of noise. The first method is based on sending each scrambled sample more than once. The simulation results showed that gain of this method is 10 dB if we send each voice sample 8 times over the classical method without repetition. The second method relies on the conversion of information from analog to digital format before doing the masking. The simulation results of this method show that the mean square error (MSE) is reduced and this reduction increases as signal to noise ratio (SNR) increase. For instance when SNR=10 dB, the MSE is reduced from ?10?^( - 1) to 2*?10?^( - 2) while it reduced from ?10?^( - 2) to 3*?10?^( - 6) when SNR=22 dB. The third method is increasing the power of the information signal relative to chaotic signal. The simulation results show that when the power is duplicated and at SNR = 24 dB, the MSE is reduced from 3*?10?^( - 3) to 0.5*?10?^( - 4) and to 3*?10?^( - 5) when the signal power is tripled.

تصنيع وتوصيف متحسس اشعة فوق البنفسجية باستخدام اغشية اوكسيد الخارصين الرقيقة Fabrication And Characterization Of ZnO Thin Film Based Uv Photodetectors

اسم المؤلف: الاء كريم حسن
اسم المشرف: رعد حمدان ظاهر غصون محسن علي
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في السنوات الاخيرة، كان هناك اهتمام متزايد في اشباه موصلات اوكسيد الخارصين للتطبيقات الضوئية ضمن منطقة الاطوال الموجية الفوق البنفسجية وذلك لكون طاقة اثارة الربط كبيرة (60 meV) وطاقة الفجوة الواسعة (3.37 eV) في درجة حرارة الغرفة. في هذا العمل, ثلاث متحسس | In recent years, there has been increasing interest in Zinc Oxide (ZnO) semiconductors for optoelectronic applications in the Ultraviolet (UV) region due to its large exciton binding energy (60 meV) and wide bandgap energy (3.37 eV). In this work, three devices of Metal Semiconductor Metal (MSM) UV photodetectors (PDs) and photoconductors (PCDs) based on ZnO were fabricated in the form of Interdigitated (IDT) MSM structures. The ZnO thin films were prepared by sol - gel spin coating technique, and deposited on a P - type Si and glass substrates. The Nickel (Ni) and Aluminum (Al) contacts were deposited by a vacuum coating deposition technique. The morphological, structural and electrical properties of the ZnO thin films were estimated by using Atomic Force Microscopy (AFM), Scanning Electron Microscopy (SEM), X - Ray diffraction (XRD), four - point probe and Hall effect measurements. Optical bandgap of ZnO film was evaluated using a double beam spectrophotometer. With applied voltage in the range ( - 5 to 5 V), the photocurrent, contrast ratio, gain, responsivity, detectivity, and Noise Equivalent Power (NEP) were estimated. The Photodetectors were illuminated with UV of 254 nm at room temperature (27 °C) and under different levels of optical power ranging between (163.2 ?w ? 172.3?w). Current Voltage (I - V) characteristics were studied and the values of the saturation current (I - s), ideality factor (n), barrier height (? - B), reach - through voltage (VRT) and flat - band voltage (VFB) were extracted under dark condition. Data analysis and curves were plotted using origin software (graphing and data analysis). The AFM and SEM images clearly demonstrate the formation of well - aligned ZnO, with smooth nanometer granular structure, dense and a good morphology. The grain size and average roughness (rms) values were found to be (59 nm, 12 nm) on Si substrate and (31 nm, 2 nm) on glass substrate, respectively.For Ni/ZnO/Ni MSM PD on Si substrate, the device has VRT of (0.56 V) and VFB of (1.5 V). The responsivity and detectivity were estimated to be (1.334 A/W and 3×1011cmHz 1/2 W - 1), respectively. I - s was found to be (8.3×10 - 7 A), n (4.4) and ? - B (0.67 eV). However for Al/ZnO/Al MSM PCDs on Si and on glass substrates, the responsivity and detectivity were (0.45 A/W and 1.2×1011 cmHz 1/2W1) and (0.94 A/W and 2.9×1011 cmHz 1/2 W - 1), respectively.The I - V measurement results obtained indicate that, the Ni/ZnO/Ni MSM PD on Si substrate behaves as a typical Schottky contact and the dominant current transport mechanism is field thermionic emission. However semi linear behavior for Al/ZnO/Al PCD on Si substrate and the current flowing through the junction was following thermionic emission mechanism, while a symmetric I - V behaviors and an excellent linear relationship between the current and applied voltage are observed in both direction for Al/ZnO/Al MSM PCD on glass substrate. The estimated responsivities, detectivities with fairly low dark currents make the diodes attractive for practical UV detector applications

منظومات تضمين العامل المتغير الفوضوي Chaos Parameter Modulation Schemes

اسم المؤلف: ابراهيم فهمي علي
اسم المشرف: حكمت نجم عبد الله
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الدراسة, تم تصميم منظومتين من CPM وتم تقييم ادائهما في مختلف قنوات الاتصال. اولا, تم اقتراح تقنية فعالة لتخمين القيمة الابتدائية للاشارة الفوضوية في منظومة تضمين القيمة الابتدائية المسماة M - ary ICM. هذه التقنية سميت ب MACE. هذه التقنية قللت من تع | In this study, two Chaotic Parameter Modulation(CPM) schemes are designed and their performance in different communication channels has been evaluated. Firstly, an efficient technique for initial condition estimation of chaotic signal in M - ary Initial Condition Modulation (ICM) scheme is proposed. This technique has been called Maximum Auto Correlation Estimation (MACE). It reduces the complexity of the demodulator; thereby, it minimizes the hardware implementation cost. Simulation results confirm that, the proposed technique outperforms the conventional technique used in direct sequence spread spectrum quadrature amplitude modulation (DSSS - QAM) system in AWGN channel when high modulation level (M) is used. At BER=10 - 3, 16, 256 ary DSSS - QAM achieve gains in Eb/N0 of about 7dB and 0.8dB in comparison with 16, 256 - ary ICM respectively because the modulation level is low. While 1024, 4096 and 16384 - ary ICM achieve gains in Eb/N0 of about 6dB, 10dB and16.5dB in comparison with 1024, 4096 and 16384 ary DSSS - QAM respectively because the modulation level is high. Furthermore, a modified version of ICM that uses BPSK modulation and one chaotic signals source together with MACE technique is proposed to reduce the implementation cost named as BPSK - ICM scheme. Simulation results confirm that, BPSK - ICM has a comparable BER performance to the DS - SS system in AWGN channel.Secondly, the bifurcation parameter of a chaotic signal has been estimated accurately by utilizing the ergodic properties of a chaotic dynamical signal. In BPSK ergodic chaotic parameter modulation (BPSK - ECPM) scheme, the information signal modulates the bifurcating parameter of the chaotic signal. A mean value estimation technique is used at the receiver to retrieve the original information accurately. This method minimizes the computational complexity of the receiver; thereby, reduces the total implementation cost.Simulation results show that, at BER=10 - 3, BPSK - ECPM scheme achieves gains in Eb/N0 of about 1dB, 1.5dB, 5.2dB, 6.5dB, 9dB, 10 dB and 11 dB, as compared with CSS, CC,FM - DCSK, DCSK,CSK,COOK and QCSK schemes respectively in AWGN channel. While in Rayleigh fading channel, at BER=10 - 3, BPSK - ECPM achieve gains in Eb/N0 of about 4.8dB, 5.8dB, 6.5dB and 11.8dB, as compared with FM - DCSK,CSS,CC and DCSK schemes respectively. Furthermore, BPSK - ECPM scheme outperforms conventional chaotic modulation systems in the presence of synchronization error and high data rate problems. Finally, BPSK - ECPM scheme shows a good recovery performance of image signal in multipath fading channel for intelligent transportation system (ITS).

تطبيق الشبكة العصبية في تكوين الشعاع المتكيف لنظام الهوائي الذكي Neural Network Application In Adaptive Beamforming For Smart Antenna System

اسم المؤلف: سليمان احمد غازي
اسم المشرف: عضيد حسن سلومي
السنة: 2015
الموضوع الدقيق: هندسة الكهرباء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: انظمة الهوائيات الذكية تعمل على تحسين الاداء وزيادة في السعة لانظمة الاتصالات المتنقلة. ويمكن لانظمة الهوائيات الذكية حل مشكلة نظام الاتصالات المتنقلة مثل التدخل في نفس القناة، والتاخير الحاصل نتيجة الانتشار والمسارات المتعددة التي تاخذها الاشارة عن طريق | The smart antenna systems are promise to provide performance improvement and capacity increasing for the base station of mobile communication systems. Smart antenna systems can solve the problem of mobile communication system such as co - channel interference , delay spread and multipath by an advance signal processing technology called beamforming. In this work artificial neural networks (Feed Forward Neural Network (FFNN) and feedback Elman Recurrent Neural Network (ERNN) ) are used for smart antenna adaptive beamforming for one and multiple targets.Neural network is used to calculate the optimum weights of antenna array to adapt the radiation pattern of the antenna array by directing multiple narrow beams toward the desired users and nulling interference or unwanted users. FFNN and ERNN are trained by supervised backpropagation learning algorithms, FFNN was trained by using Levenberg - Marquardt (lm),Resilient Back - Propagation (Rprop), Gradient descent with momentum and adaptive learning rate (gdx), Gradient descent and adaptive learning rate (gda) and biasing regulation(br), while lm and Rprop are used to train ERNN..The simulation results show that the best performance of smart antenna adaptive beamforming for one and multiple targets is obtained when the NN (FFNN and ERNN) trained by lm algorithm as compared with other algorithms, since it consider the fastest supervised training algorithm but with more memory requirement. Where the performance of FFNN training phase based (lm) algorithm for single target for five element uniform linear array antenna is [2.746641e - 14] at epoch 27 with best validation performance and best test performance approximately equal to the best training performance. While The performance of ERNN training phase based lm algorithm for single target is [1.121938e - 14] at epoch 38 with best validation performance equal to [1.682442e - 14] and the best test performance is [3.363946e - 14].The neural network model in adaptive beamforming are compared with smart antenna adaptive beamforming based on Least Mean Square (LMS) algorithm, and gave better performance than LMS.

اكتشاف العطل الارضي المنفرد واخماده ذاتيا باستخدام السيطرة على ملف بترسون في شبكة التوزيع Detection of Earth Fault And Self - Extinguishing By Controlling Petersen - Coil In Distribution Grid

اسم المؤلف: فريال ابراهيم الظفيري
اسم المشرف: عبد الغني عبد الرزاق عبد الطائي قاسم كرم عبد الله
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:
المستخلص: ان اكثر الاعطال شيوعا والتي تتعرض لها الشبكة الكهربائية في العالم هو Single Line to Earth حيث ان عطل احدى الاطوار مع الارضي في الشبكات الكهربائية, يسبب هذا قوسا كهربائيا اضافه الى جهد كبير , اكبر من جهد الطورين مع بعضهما مما يزيد خطورة الفصل والعزل في ال | All over the world, the most common faults in the distribution network is the single line to ground fault. A single phase fault with the earthing in the distribution networks causes electrical arc as well as high voltage than the two phases together which increase the danger of separation and isolation in networks. Consequently, this case can be controlled through Peterson Coil which turns off or reduces the electrical arc that makes the network safer. This work has using technique to detect the earth fault in the single - phase by distinguishing between the higher and the lower values of the currents. Also, this technique is used to detect the capacity of earthing network lines and the possibility to adapt the capacitor for inductance in order to detect the electrical arc during faults and to detect the earth leakage.Moreover, we have used many methods to control Peterson coils such as using PID Controller , Fuzzy Logic Controller, Hybrid control PID and Fuzzy System and Adaptive Neural Fuzzy Inference system, to determine the earth fault current at values equal to the current in the two sound phases. To getting best results for the fault current through conducting lab experiences by using DC Servo motor and Arduino. And the fault current is converted from the rated current, thus thousands of tons of copper cost are save. They were used to carry this high voltage. Finally, the first practical part (Simulink) was implemented through Mat lab (R2011a) and (R2013a) , On the other hand, the second practical part was in the lab, where servo motors Where used, variable and non - variable inductance , the drive to isolate the control loop from the power, PID and PWM, have also used the Arduino system to program the overdrive.

تصميم وتنفيذ نظام العناية الصحية المتنقل في الاسعاف بالاعتماد على شبكة الانترنت Design and Implementation of Ambulance Mobile Health System Based on Internet

اسم المؤلف: عبد الله علي جابر الحسيني
اسم المشرف: سمير جاسم محمد
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:

محاكاة شبكات اتصال WiFi باستخدام OPNET Simulation Of WiFi Communication Networks Using OPNET

اسم المؤلف: بسام عبد المنعم صالح
اسم المشرف: ستار بدر سدخان
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:

نظام امني تطبيقي جديد يعتمد على تقنية التعرف بواسطة الموجات الراديوية A Novel Applicable Approach Of RFID Based Secure System

اسم المؤلف: احمد فاهم البغدادي
اسم المشرف: محمود شاكر نصر
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى: