البحث — المستودع الرقمي العراقي

المستخلص: يستخدم اوكسيد الخارصين (ZnO) لكشف الاشعة فوق البنفسجية وذلك لكبر فجوة الطاقة وكبر طاقة اثارة الربط لهذا الشبه موصل. اوكسيد الخارصين كذلك يمتلك سرعة اشباع عالية وفولتية انهيار عالية. في هذا العمل تم تصنيع متحسس اشعة فوق بنفسجية نوع (معدن - شبه موصل - معدن) با | Zinc Oxide (ZnO) has been commonly used for ultraviolet detection due to large band gap and excition binding energy. ZnO has high breakdown electrical field, also has a much larger saturation velocity. In this work three ultraviolet Metal Semiconductor Metal (MSM) photodetectors were fabricated, based on ZnO and Silver (Ag) doped Zinc Oxide (SZO) with (2% and 4 % doping ratios) thin films. The technique used to prepare the thin films was sol - gel and spin coating technique by using Si (100) p - type. Silver interdigitated (IDT) electrodes were deposited on the films by a vacuum coating deposition technique to form the three devices.The electrical properties for the fabricated photodetectors (PDs) were studied using Semiconductor Characterization System (SCS) at room temperature ( 27 C^o). The applied voltage was in the range of ( - 5 to 5) V.The SEM images showed a non - uniform distribution of the Ag dopants, these dopants formed clusters and these clusters increased as the amount of Ag dopants increased. The mobility, carrier concentration, and roughness for the SZO films increased when compared to undoped film. The optical bandgap and the transmittance are decreased when the doping ratio is increased. The saturation current (I - S) was decreased by a factor of 4, and 12 for the devices based on Ag doped ZnO (with 2% and 4 % doping ratios) thin films, respectively. The sensitivity was significantly increased with increasing the doping ratio. This enhancement attributed to the roughness of the Ag dopants (clusters). The detectivity was increased for the devices based on SZO films. The high detectivity with low saturation current made the devices based on SZO films suitable for optoelectronic applications and integrated circuits. From the experimental data and analysis, it was found that the PD with ZnO : Ag 4 % doping ratio has higher responsivity and gain of 0.523 A/W and 257 , respectively. This is confirmed by thin film and device characterization which makes this PD suitable for UV detection purposes.

استخدام اغشية اوكسيد الخارصين (ZnO) الرقيقة في متحسس لتركيز الهيدروجين من نوع ترانزستور تاثير المجال ممدود البوابة Zinc Oxide Thin Films - Based Extended - Gate Field - Effect Transistor (EGFET) As Ph Sensor

اسم المؤلف: علي عزام عبد اللطيف

اسم المشرف: رعد حمدان ظاهر غصون محسن علي

الموضوع العام: هندسة الكهرباء والالكترون والاتصالات

السنة: 2015

الموضوع الدقيق: هندسة الالكترونيك والاتصالات

الدرجة: ماجستير

الجامعة: الجامعة المستنصرية - كلية الهندسة - قسم الهندسة الكهربائية

اللغة: الانكليزية

مكان الجامعة: بغداد

الصفحات الاولى:

المستخلص: ظهر في السنوات الاخيرة اهتمام ملحوظ في استخدام متحسسات تركيز الهيدروجين (الرقم الهيدروجيني) من نوع ترانزستور تاثير المجال (FET) في التطبيقات الطبية الحيوية مثل دم الانسان, اليوريا واللعاب لان عملية تصنيع متحسسات تركيز الهيدروجين تتجه نحو التكلفة المنخفضة | In recent years, there is noteworthy interest in using pH - sensors based on Field Effect Transistor (FET) in biomedical applications such as human blood, urine, and saliva because the fabrication of pH - sensors is tending toward low cost, small size, disposable, and real - time measurement. In this work, Extended Gate Field - Effect Transistor (EGFET) pHsensors were built using thin films of Zinc Oxide (ZnO) doped with Palladium (Pd) as sensing membranes. The Pd - doped ZnO thin films with different molar concentrations (Pd = 0%, 2% and 4%) were deposited onto p - type Si(111) substrate by sol - gel method. The surface morphology of the prepared films was imaged and studied by Atomic Force Microscopy (AFM) and Scanning Electron Microscopy (SEM). The crystal structure of the fabricated films was examined by X - Ray Diffraction (XRD) test. The optical and electrical characteristics of the films were measured using spectrophotometer and Hall - Effect measurement device, respectively.The EGFET pH - sensor has been prepared by linking the fabricated sensing devices to the gate terminal of a commercial Metal - Oxide - Semiconductor Field - Effect Transistor (MOSFET CD4007UB).The fabricated sensing devices were immersed in buffer solutions with pH range of (pH 3 ? pH 11). The pH sensing characteristics of ZnO and Pd - ZnO/silicon EGFET devices were studied using Semiconductor Characterization System (SCS - Keithley 4200).The ZnO EGFET sensor exhibits voltage sensitivity and linearity of 31.5 mV/pH and 0.9809 (or 98.1%) in linear regime with pH range of (pH 3 - pH 11). The voltage sensitivity and linearity of Pd - doped ZnO (with 4% molar concentration of Pd) EGFET device in the linear regime with pH range of (pH 5 - pH 11) are 27.86 mV/pH and 0.9785 (or 97.85%), respectively. The experimental results show that the Pd - doped sensing films by sol - gel method cannot be adopted for whole pH range. This means that the doped films have fewer amounts of H+ ions sensing sites at its surface than undoped ZnO fims.

تصميم شبكة استشعار لاسلكية متينة لمراقبة استهلاك الطاقة Robust Wireless Sensor Network For Energy Monitoring

اسم المؤلف: حيدر عبد الحميد محمد جواد العبيدي

اسم المشرف: حكمت نجم عبد الله طارق محمد سلمان

الموضوع العام: هندسة الكهرباء والالكترون والاتصالات

السنة: 2015

الموضوع الدقيق: هندسة الالكترونيك والاتصالات

الدرجة: ماجستير

الجامعة: الجامعة المستنصرية - كلية الهندسة - قسم الهندسة الكهربائية

اللغة: الانكليزية

مكان الجامعة: بغداد

الصفحات الاولى:

المستخلص: There has been a quick development in the Wireless Sensor Network (WSN) field that promises to revolutionize the way people lives. Where they have a wide range of applications especially in the monitoring applications like power consumption, military, and healthcare. This thesis has three objectives. First, to design and implement a prototype of WSN for monitoring power (as well as temperature) in buildings. Second, to investigate the bounds of coverage in different building construction materials. Third, to evaluate the amount of improvement introduced to the ZigBee transceiver when channel - coding methods are used.The basic design elements of the implemented power and temperature monitoring system includes current sensors, temperature sensors, microcontrollers, and wireless transceivers implemented using Global System for Mobile Communications/General Packet Radio Service (GSM/GPRS) platform and ZigBee technology. The use of GSM/GPRS platform allows the user to control or gather information about the system from anywhere just by sending a request using Short Message Service (SMS). In addition, the measured data can be visualized through a user friendly Graphical User Interface (GUI). Many measurements have been done to find the exact limitation of the designed system in terms of coverage and signal strength in the presence of objects of different materials including; cardboard, metal, concrete bricks, wood and corkboard. Furthermore, the MATLAB Simulink model of the proposed ZigBee transceiver uses Convolutional Coding (CC) at different code rates to improve the performance in AWGN channel, Rayleigh and Rician multipath fading channels.The results indicated that the use of ZigBee based WSN in electric power monitoring provides flexibility and helps in reducing power consumption. In addition, the experimental results show that the construction materials of buildings have varying impact on the network performance. At 4m distancebetween the base station and the sensing node, the losses in signal strength are 15, 20, 21 and 32 dBm when using metal as compared with cardboard, corkboard, wood and concrete bricks respectively.It is observed from the simulation results that using convolutional coding in ZigBee transceiver gives better performance than the traditional ZigBee transceivers and that the convolutional code of code rate 1/8 gives the best performance compared to other CC. In AWGN channel and at BER of 10 - 4, the maximum performance improvements in terms of BER obtained over traditional system are 14dB and 13.5dB for OQPSK and BPSK (868 - 900MHz) based ZigBee respectively. While these improvements are 23.5dB, 40.5dB and 19.5dB, 12.5dB in Rayleigh & Rician channels at the same BER respectively.

تصميم وتنفيذ نظام جباية اجور استهلاك الطاقة الكهربائية بالاعتماد على نظام الاتصالات العالمية Design and Implementation of Electrical Energy Billing System Based on GSM

اسم المؤلف: احمد محمد مرزة

اسم المشرف: محمود شاكر الشمري

الموضوع العام: هندسة الكهرباء والالكترون والاتصالات

السنة: 2015

الموضوع الدقيق: هندسة الالكترونيك والاتصالات

الدرجة: ماجستير

الجامعة: جامعة بابل - كلية الهندسة

اللغة: الانكليزية

مكان الجامعة: بابل

الصفحات الاولى:

تصميم وتنفيذ نظام العناية الصحية المتنقل في الاسعاف بالاعتماد على شبكة الانترنت Design and Implementation of Ambulance Mobile Health System Based on Internet

اسم المؤلف: عبد الله علي جابر الحسيني

اسم المشرف: سمير جاسم محمد

الموضوع العام: هندسة الكهرباء والالكترون والاتصالات

السنة: 2015

الموضوع الدقيق: هندسة الالكترونيك والاتصالات

الدرجة: ماجستير

الجامعة: جامعة بابل - كلية الهندسة

اللغة: الانكليزية

مكان الجامعة: بابل

الصفحات الاولى:

محاكاة شبكات اتصال WiFi باستخدام OPNET Simulation Of WiFi Communication Networks Using OPNET

اسم المؤلف: بسام عبد المنعم صالح

اسم المشرف: ستار بدر سدخان

الموضوع العام: هندسة الكهرباء والالكترون والاتصالات

السنة: 2015

الموضوع الدقيق: هندسة الالكترونيك والاتصالات

الدرجة: ماجستير

الجامعة: جامعة بابل - كلية الهندسة

اللغة: الانكليزية

مكان الجامعة: بابل

الصفحات الاولى:

نظام امني تطبيقي جديد يعتمد على تقنية التعرف بواسطة الموجات الراديوية A Novel Applicable Approach Of RFID Based Secure System

اسم المؤلف: احمد فاهم البغدادي

اسم المشرف: محمود شاكر نصر

الموضوع العام: هندسة الكهرباء والالكترون والاتصالات

السنة: 2015

الموضوع الدقيق: هندسة الالكترونيك والاتصالات

الدرجة: ماجستير

الجامعة: جامعة بابل - كلية الهندسة

اللغة: الانكليزية

مكان الجامعة: بابل

الصفحات الاولى: