عرض: 25 50 75 100 النتائج

نتائج البحث: 25 من أصل 39

خصائص البلورة السائلة المطعمة بالاجسام النانومترية كمفتاح بصري Characterization of Nanoparticles Doped Liquid Crystal as an Optical switch

اسم المؤلف: روى خليـل ابراهيـم المشهـدي
اسم المشرف: سؤدد سلمان البصام
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: دكتوراه
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد

دراسة تاثير الاشعة المؤينة على خصائص بعض الصبغات الليزرية Study the Effect of Ionizing Radiation on the Properties of Some Laser Dyes

اسم المؤلف: وجدان ثامر فزع
اسم المشرف: محمد عبد الله حميد
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد

خصائص الجسيمات النانوية InN المحضرة بالليزر ككاشف ضوئي Characterization of InN nanoparticles prepared by PLAL as a photodetector

اسم المؤلف: سارة فاضل عباس
اسم المشرف: خولة صلاح خشان
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

تصنيع وخصائص السليكون المسامي للكشف عن الاشعة الفوق البنفسجية Fabrication and characterization of Porous silicon for UV detection

اسم المؤلف: احمد شهاب احمد
اسم المشرف: رائد عبد الوهاب اسماعيل علوان محمد علوان
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

تصنيع وتحسين كفاءه خليه الصبغه باستخدام جسيمات الذهب النانويه المحضره باستخدام الليزر Fabrication and effeciency enhancement of Dye sensitized solar cell using gold nanoparticles prepared by PLAL

اسم المؤلف: غفران ستار جابر
اسم المشرف: عبد الرحمن خلف علي مخلص اسماعيل محمد
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

تحضير ودراسة خصائص السليكون المسامي المتدرج لاغراض النبائط الكهروبصرية Preparation and Characterization of Gradient porous silicon for Opto-electronic Device

اسم المؤلف: سعاد محمد علي
اسم المشرف: علوان محمد علوان
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

تاثير الموجات الصدمية المنتجة بالليزر على المواد المعدنية واللامعدنية للتطبيقات الطبية و الصناعية Laser induced Shock Wave onMetallic and Non-Metallic Materials for Medical and Industrial Applications

اسم المؤلف: حنان اسماعيل ابراهيم
اسم المشرف: وليد خلف حمودي مهدي صالح عيدان
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

الترسيب بالانتقال الكهربائي للجسيمات النانوية المحضرة بطريقة القشط بالليزر Electrophoretic Deposition for the Nanoparticles Prepared by Laser Ablation

اسم المؤلف: مصطفى عامر خلف
اسم المشرف: خليل ابراهيم حسون صباح حبيب صبيح
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

Preparation and characterization of iron oxide nanoparticles by laser ablation as antibacterial agent

اسم المؤلف: Abdulrahman Safa Abdulsalam
اسم المشرف: Raid Abd Alwahab Ismail Ghassan Mohammad Sulaiman
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

اعتماد طول انتقال الالكترون خلال2,1 - ثنائي (بردين - 4 - ايل) ايثان للاسلاك الجزيئية Length Dependence of electron transport through 1,2 - di(pyridin - 4 - yl)ethane - Molecular wire

اسم المؤلف: ايلاف مهدي محمد العوادي
اسم المشرف: ايناس محمد الربيعي كولن جون لامبرت
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:

دراسة تحليلية لمنظومة الاتصالات الليزرية تحت الماء للمدى القصير An Analyzing study of a Short Range Underwater Laser Communication System

اسم المؤلف: نور صلاح خضير البوسلطان
اسم المشرف: جاسم محمد جاسم
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:

التاثيرات الكميه على الخصائص الالكترونيه للجزيئه المفرده Quantum Effects on Electronic Properties of a Single Molecule

اسم المؤلف: نورة علي عبيد البكري
اسم المشرف: ايناس محمد الربيعي
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:

استخدام طريقة القشط الليزري لتحضير وتوصيف خصائص اغشية اوكسيد الرصاص وكبريتيد الرصاص النانوية Prepartion and Charastrization of PbO and PbS Nano - Thin films by Using Laser Ablation Method

اسم المؤلف: تبارك عبد العباس فياض
اسم المشرف: وجيهه عبد الدائم زوبع غالب عبد الوهاب الدهش
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بابل
الصفحات الاولى:

دراسة طيفية لبعض الاوساط الليزرية الفعالة في مديات مختلفة من الطيف الكهرومغناطيسي A Spectroscopic Study of Some Laser Active Media in Different Ranges of the Electromagnetic Spectrum

اسم المؤلف: رجاء عبيس عبد السادة
اسم المشرف: وجيهة عبد الدائم زوبع ايناس محمد سلمان
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بابل
الصفحات الاولى:

تصنيع ودراسة الخصائص الفوتوفولتائة للوصلة TiO2 (1 - x) Bix/Si بواسطة الترسيب بالليزر النبضي Synthesize and Characterization of TiO2(1 - x)Bix/Si Photovoltaic by Pulses Laser Deposition

اسم المؤلف: ميسون ذياب راضي
اسم المشرف: صباح نوري مزهر غصون محمد حميد
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا البحث استخدام طريقة الترسيب بالليزر النبضيPLD بواسطة ليزر Nd : YAG ذي الطول الموجي nm1064λ= وبمعدل تكرار Hz6 وفترة نبضة ns10 لترسيب اغشية رقيقة بنوعية عالية لثنائي اوكسيد التيتانيوم النقية والمشوبه بالبزموث وبنسب وزنية مختلفة (0, 3, 5, 7, 9) % تم الترسيب على قواعد زجاجيه ورقائق السليكون وذلك لدراسة تاثير التشويب على كل من الخصائص الفيزيائية لاغشية ثنائي اوكسيد التيتانيوم، وثم قياس خواص الكاشف TiO2 : Bi/ Si..بينت قياسات حيود الاشعه السينيه لاغشية ثنائي اوكسيد التيتانيوم النقية والمشوبة بنسب مختلفة (0, 3, 5, 7, 9) % بالبزموث بان هذه الاغشية تمتلك تركيب عشوائي للاغشية النقية تتحول الى متعدد التبلور عند التشويب والتلدين وذات تطابق جيد مع القمم القياسية لطوري Anatase وRutile وكان الاتجاه السائد للحبيبات هو باتجاه (110) Rutile مع زيادة التبلور بزيادة نسبة التشويب وخاصة لطور ال (Rutile)حتى نسبة 7% ومن ثم يتناقص عند نسبة التشويب 9% مع ظهور قمم صغيرة مطابقة لقمم البزموث . كذلك ازدياد درجة التبلور وخصوصا للطور (Rutile)عند زيادة درجة حرارة التلدين من درجة حرارة الغرفة الى 525 كلفن.تبين من دراسة سطح الاغشية بواسطة مجهر القوى الذريه ان الحجم الحبيبي يزداد بزيادة التشويب ثم يتناقص عند نسبة التشويب 9%. بينت دراسة اطياف النفاذية في مدى الطول الموجي ( nm1100 - 300) ان قيمة النفاذية لاغشية TiO2 النقية عند الطول الموجي 500nm تساوي 52.4 % وتناقصت عند التشويب بالبزموث , كذلك فقد وجد ان فجوة الطاقة البصريه لاغشية اوكيسد التيتانيوم النقية 3.7 الكترون فولت وقلت عند التشويب حيث تصل الى 2.2 الكترون فولت عند نسبة تشويب % 9.بينت دراسة الخصائص الكهربائية لاغشية ثنائي اوكسيد التيتانيوم النقية والمشوبة المتمثلة بتوصلية التيار المستمر في مدى درجة حرارة K(473 - 303) ,ان هذه الاغشية تمتلك طاقتا تنشيط وبزيادة نسب التشويب تقل قيمها وتزداد التوصيلية، ومن نتائج تاثير هول لتحديد نوع الحاملات يتضح بان كافة الاغشية المحضرة هي ذات حاملات من نوع السالب وبزيادة نسب التشويب والتلدين تزداد كثافة حاملات الشحنة وتتناقص التحركية. تزداد قيمة الاستجابية والكفاءة والكشفية النوعية لكاشف ال TiO2 : Bi/Siمع التلدين ومع زيادة نسبة التشويب بالبزموث من 0 - 7% ثم تقل عند نسبة 9% بينما تتصرف القدرة المكافئة للضوضاء عكس ذلك. تصل الاستجابية الى قمة عند 0.3 مايكرومتر ل TiO2النقية تتزحزح الى 0.6 عند زيادة نسبة البزموث الى 9% والى 0.4 عند التلدين بدرجة 523 كلفن كنتيجة لنقصان فجوة الطاقة | Pulse laser deposition is used in this research by Nd : YAG laser with λ=1064 nm average frequency, 6 Hz and pulse duration 10 nm) to deposit pure and content TiO2 thin films with Bismuth at different ratio (0, 3, 5, 7,and 9)wt. % on glass and Silicon wafer substrates to study the effect of content on the physical properties of TiO2 thin films and then study the TiO2 : Bi/ Si detector characteristics.X - ray diffraction pattern measurements for pure and contented titanium dioxide films with different content ratio of Bi (0, 3, 5, 7 and 9)% show that these films amorphous structure converted to polycrystalline structure with annealing and content and have a good identically with standard peaks for Anatase and Rutile phases. The preferred orientation is along (110) direction for Rutile. The crystallinity of the films increase with increasing content ratio to 7% Bi and specially for rutile phase then decrease at 9%. The crystallinety went up when annealing temperature increases from RT to 525K.From Atomic Force Spectroscope, a topography of prepared films show an increment in average diameter with content ratio then it started to decrease when it reach 9%.UV - visible spectra from 300 to 1100 nm shows that the pure TiO2 film has 52.4% transmittance at 500 nm wavelength. The transmittance decreases with increasing of content ratio with Bi. The optical energy gap for pure TiO2 film is about 3.7 eV and decrease with content until it reaches 2.2 eV at 9% Bi content.The results of electrical properties are represented by DC conductivity in temperature range (303 - 473) K for pure and contented TiO2 films show that these films have two activation energies and with increasing content ratio, these activation energies decrease and the conductivity decreases, as well Hall effect measurements show that all films have n - type charge carriers and its concentration increases and the mobility decreases with content and annealing.The responsivity, quantum efficiency and the specific detectivity for TiO2 : Bi/Si detector increase with annealing and with increase Bi content from 0 to 7% then decrease at 9% , while the NEP has inverse behavior. The responsivity reached peak at λ= 0.3 μm for pure TiO2 and this peak shift to 0.6 μm when Bi content increase to 9% and shifted to 0.4 μm when annealed at 523 K as a results of decreasing the energy gap

تصنيع كاشف من انابيب الكاربون النانوية لليزر الاشعة تحت الحمراء Fabrication of Carbon Nanotubes Detector for IR Laser

اسم المؤلف: مروة عبد الرحمن داود
اسم المشرف: سمر يونس طه وسن رشيد صالح
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الدراسة تم تصنيع كاشف يعمل في منطقه الاشعة تحت الحمراء البعيدة وبدرجة حرارة الغرفة باستخدام اربع انواع من انابيب الكاربون النانوية متعددة الجدران. (MWCNTs, COOH - MWCNTs, short - MWCNTs and DWCNTs) .انابيب الكاربون النانويه رسبت بتقنيه (dip coating) و((drop casting لتحضير اغشية انابيب الكاربون النانوية متعدد الجدران على قاعده سليكون مسامي من نوع n و. p تم تبخير اقطاب الالمنيوم على اغشيه انابيب الكاربون النانوية لتصنيع كاشف يعمل في منطقه الاشعة تحت الحمراء البعيده. تم دراسه الخواص التركيبيه والطبوغرافية والبصريه وحسابات هول لهذه الاغشيه المصنعة . تم فحص الخواص التركيبه لغشاءMWCNTs باستخدام حيود الاشعه السينيه (XRD) واظهرت النتائج ان له تركيب متعدد االتبلور وشكله سداسي والغالب كان باتجاه (002). مجهر القوة الذري ((AFM تم فية التركيز على تشخيص خواص السليكون المسامي مع انابيب الكاربون النانوية متعددة الجدران. وجد ان الفلم له توزيع سطح متجانس مما يشير الى التوزيع الجيد لانابيب الكاربون النانوية فوق النتؤات النانوية للسليكون. تم تعين معدل الحجم الحبيبي وكانت بحدود 87.05 nm . المجهر الالكتروني الماسح (SEM)استخدم لدراسة طوبوغرافية اغشيه انابيب الكاربون النانوية متعددة الجدران ووجد ان هذه الاغشيه متجانسة ولاتوجد فيها اية تكتلات او شقوق .فجوة الطاقه البصرية في المنطقة تحت الحمراء تم ايجادها من فحص FTIR وكانت فجوة الطاقة0.12 eV. دراسة طيف رامان ولانابيب الكاربون النانوية متعددة الجدران, بينت ان الطيف يتحدد بثلاثة انواع من الحزم D وG وPRM .وجدن الخط (D) وجد انه يقع عند 1561.62 cm - 1 والتي تشير الى عدم الانتظام بسبب العيوب وتقوس لشبيكه انابيب الكاربون متعددة الجدران بينما الخط (G) يقع بحدود 1750 cm - 1 ويكون نتيجه اهتزازات في اواصر C - C الخط الثالث PRMكانت تقع عن2700 cm - 1, هذه الحزم ممكن استخدامها لتقدير اي عيوب في الكاربون. نسبه الشدة D/G تساوي 1.135 . مطياف الاشعه تحت الحمراء استخدم لدراسة طيف انابيب الكاربون النانوية وللبوليمر والصبغة وظهرت امتصاصية جيده لانابيب الكاربون النانوية عند الطول الموجي 10.6 µm والذي يقع ضمن منطقة تحت الحمراء البعيدة ممايجعلها اختيار جيد لتطبيقات الاشعة تحت الحمراء. اظهرت قياسات تاثير هول ان انابيب الكاربون متعدد الجدران المرسبة على قاعدة السليكون المسامي هي من نوع شبه الموصل الموجب p - type)) ولها توصلية عالية. خصائص التيار - فولتيه واستجابيه الكاشف المصنع قيست عند الظلام والاضاءة لهذه الاغشيه بواسطه التشعيع بليزر ثاني اوكسيد الكاربون بطول موجي 10.6µm وبقدرة 2.5 W و2.2 . استجابية وخصائص كاشف التوصيل الضوئي تم تحسينها عن طريق تغطية افلام انابيب الكاربون النانوية متعدد الجدران بطبقة سمكها0.1mm من البوليمرات polyanilin وpoly methyl acrylae وبالاضافة الى صبغة methylene blue هذه الانواع من البوليمرات المطعمة بالصبغه تعتبر كمعالجة سطحية لغشاء الكاشف والتي تزيد بشدة من الاستجابيه الضوئيه لكاشف اشعه تحت الحمراء البعيدة.خصائص الكاشف (الكشفيه , الربح ,الاستجابه , القدره المكافئه للضوضاء ) حسبت قبل وبعد عملية الطلاء بالبوليمر ووجد ان الربح يزداد بحدود 25 مره اكثر من النماذج غير المطعمة .بينما الكشفيه ازدادت من (cm.Hz^1/2)/W 107 الى 1011(cm.Hz^1/2)/W بعد طلائها بالبوليمر .النتائج اظهرت ان الاستجابيه تزداد اكثر من الاستجابيه لاغشيه الكاربون النانوية غيرالمطعمه وتصل الى 0.0177 A/W لنوع انابيب الكاربون متعدد الجدران من نوع شبه الموصل السالب المحضر بطريقه (drop by drop ) وبينما اعلى الكشفية النوعيه بعد اضافه البوليمرات المطعمه بالصبغه كانت 7.08*1011 (cm.Hz^1/2)/W في حالة انابيب الكاربون متعدد الجدران لنوع شبه موصل السالب محضر بطريقه (dip coating) .هذه القيم تعطي اثبات لتاثير البوليمر في تحسين خصائص كاشف التوصيل الضوئي الاشعة تحت الحمراء البعيدة تم التحقق من تاثير تغطية اوتطعيم افلام انابيب الكاربون النانوية بالبوليمر على زمن الاستجابة الكاشف ووجد ان زمن النهوض كان 1.42ms , زمن الاستجابية كان 2.14ms بينمزامن الهبوط كان 3.92ms . | In this study the infrared photoconductive detectors works at far infrared region and at room temperature were fabricated. The detector fabricated using four types of carbon nanotubes CNTs (MWCNTs, COOH - MWCNTs, short - MWCNTs and DWCNTs).The carbon nontubes suspension is deposited by dip coating and drop - casting techniques to prepare thin films of CNTs. These films are grown on porous silicon (PSi) substrates of n - type and p - type Si. The aluminum electrodes were evaporated on the CNTs film to fabricate the far IR detectors.The structural, morphological, optical properties and Hall measurements of the film were studied. The structure of the MWCNTs film is examined by X - ray diffraction (XRD) and found to be polycrystalline of hexagonal structure with strong orientation at (002). The AFM studies are focused on the characterization of the PSi - CNTs and found it had a good and uniform surface homegensity which gives a good indicator for formation of the MWCNTs over the nanospikes of Si. The average particle size was determined and found to be 87.05 nm. The scanning electron microscope (SEM) technique has been applied to study the morphology of the deposited MWCNTs film. The results shows that the film are homogeneous and does not have areas with clusters or cracks.The optical energy gap in the IR region was calculated from FTIR spectrum and found to be 0.12 eV. From Raman shift spectrum for the MWCNTs, it was found that the spectrum is dominated by three typical lines; D - band, and G - band, and RPM band. The D - line is located about 1561.62 cm - 1 which assigned to the disorder induced by defects and curvature in the nanotube lattice, while G - line is located about 1750 cm - 1 due to the in - plane vibration of the C - C bonds. The RPM band is located at 2700 cm - 1 . These bands can be used to evaluate the extent of any carbon - containing defects. The D/G intensity ratio was 1.135. FTIR spectrophotometer was used to study the infrared spectrum of CNTs, polymers and Methylene Blue dye, which appear that CNTs have good absorbance in the wavelength of 10.6 µm. This is mean that these materials are very good candidate for IR applications. Hall Effect measurements show that the carbon nanotubes deposited on porous silicon substrate has a p - type semiconductor behavior and high conductivity. The I - V characteristics and the photoresponsivity of the fabricated detector are measured at dark and under illumination for CNTs film by IR radiation from CO2 laser of 10.6µm wavelength and power of 2.2 and 2.5W. The photoresponse and figures of merit of the photoconductive detector is improved by coating (functionalized) the CNTs films with layer of 0.1 mm of the blend polyaniline, polymethylmeth acrylate and methylene blue dye. This type of polymer coating can be considered as a surface treatment of the detector film, which highly increases the photoresponse and specific detectivity of the fabricated CNTs IR detector. The figure of mertis (Rλ, G, NEP and D*) were calculated before and after functionalization process. It is found that is increased in about 25 time than that for uncoated samples, while the specific detectivity was increased from order of 10+7 (cm.Hz1/2)/W to 10+11 (cm.Hz1/2)/W after coated with polymer.These values give an improve for the effect of polymer on the enhancement of the performance of IR photoconductive detector. The effects of the coating CNTs film with polymer on the response time of the detector investigated and found that the rise time was 1.428 ms, response time 2.14 ms while the fall time was 3.92ms .

خصائص اغشية اوكسيد الكادميوم المشوب بالانديوم ذات التركيب النانوي والمحضرة بطريقة الترسيب بالليزر النبضي لتطبيق المتحسس الغازي Characterization of In Doped CdO Nanostructure Prepared by PLD for Gas Sensor Application

اسم المؤلف: مازن حامد حسن
اسم المشرف: علي احمد يوسف الشمري
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم بهذه العمل دراسة نمو الاغشية بظروف ترسيب مختلفة لفهم تاثير طريقة التحضير على خصائص الغشاء ولتحديد افضل الظروف التحضيرية وتتمثل بدرجة الحرارة (400°C), وضغط الاوكسجين(2×10 - 1) mbar وكثافة طاقة الليزر الساقطة 1.8 J/cm2 باختلاف محتوى اوكسيد الانديوم (7% ,5%, 3%, 1%, 0) بالتردد المضاعف لليزر النيديميوم - ياك الذي يعمل بتقنية عامل النوعية عند الطول الموجي 532nm بمعدل تكرارية (1 - 6) هرتز وامد نبضة 10 نانوثانية لترسيب اغشية اوكسيد كادميوم انديوم النانوية على قواعد مختلفة من الكوارتز والالومينا بسمك 150±10 نانومتر وعدد نبضات 150 نبضة لكل الاغشية باختلاف ظروف الترسيب. الخصائص التركيبية للاشعة السينية تظهر اغشية رقيقة لتركيب مكعب متعدد التبلور ذات اتجاة سائد (111) باتجاة موازي للسطح, عند نمو غشاء اوكسيد كادميوم انديوم على قواعد الالومينا تم الحصول على اصغر حجم حبيبي 16.52 nm عند نسبة التشويب 7%)) . مما يدل على تبلور افضل للغشاء وهذا ماتوضح ايضا من صورمجهرالقوة الذرية. تم دراسة طوبوغرافية السطح باستخدام مجهر القوى الذرية (AFM) . تظهر العينات ذات تركيب حبيبي وان حجم الحبيبات تتناقص مع زيادة نسب التشويب واصغر حجم حبيبي (79.11nm) و(82.99nm) تتحقق عند نسب تشويب (7%) لقواعد الكوارتز والالومنيا على الترتيب, من صور مجهر الالكترون الماسح تم الحصول على حبيبات كروية صغيرة تتراوح nm (60 - 80 ) للاغشية النقية والمشوبة. قياس الخصائص البصرية باستخدام مطياف الاشعة المرئية وفوق البنفسجية . الاغشية الرقيقة لها نفاذية عالية في المنطقة المرئية بمعدل نفاذية اعلى من (93%). وبفجوة طاقة بصرية تراوحت بين (3.25 - 3.15eV) . كما تم حساب فجوة الطاقة البصرية باستخدام جهاز مطياف الضيائية (PL) وكانت النتائج مقاربة لما تم الحصول عليه من قياسات طيف الاشعة المرئية وفوق البنفسجية, وظهور ازاحات بسيطة باتجاة الطول الازرق في قمم الامتصاص مع زيادة نسب التشويب. نتائج شدة الاستضاءة الفوتونية للاغشية المصنعة قيست ضمن المدى (200 - 900) nm,حيث هيجت الاغشية عند طول موجي (270nm) , اعظم شدة ظهرت عند المنطقة البنفسجية عند طول موجي (445.2nm). الخصائص الكهربائية تتضمن حساب التوصلية المستمرة والتي تظهر طاقة للتنشيط لجميع الاغشية . وطاقة التنشيط (0.228eV) و(0.234eV) للاغشية النقية على قواعد الكوارتز والالومنيا , واعلى طاقة تنشيط (0.515eV) تتحقق عند نسبة تشويب (3%) لقواعد الكوارتز و(0.42eV) تتحقق عند نسبة تشويب(7%) لقواعد الالومنيا. دراسة تاثير هول تظهر شبه موصل من نوع (n - type) . قياس التحسسية للاغشية (CdO) النقية والمشوب لخليط من غاز ثاني اوكسيد النتروجين والهواء في منظومة مصنعة محليا , تم اختبار جميع الاغشية لنسبة الخلط (3% NO2 : air) وفولتية تحفيز (3V). افضل درجة حرارة عمل للمتحسس كانت عند درجات الحرارة (200 - 225)oC للاغشية النقية وتتناقص الى oC (175 - 200) للاغشية المشوبة . اعظم تحسس كانت (263.97%) وسرعة استجابة زمنية (13.5s) وزمن استرداد (15.5s) تتحقق عند نسبة تشويب (3%), والتحسسية تتناقص مع زيادة نسب التشويب. | In this work, films have been grown under various deposition conditions in order to understand the effect of processing on the film properties and to specify the optimum condition, namely substrate at temperatures of (400°C), oxygen pressure (2×10 - 1) mbar, laser fluence 1.8 J/cm2, and with different In2O3 contents (0, 1%, 3%, 5% and 7%) using double frequency Q - switching Nd : YAG laser beam (wavelength 532nm), repetition rate (1 - 6) Hz and the pulse duration of (10ns), to deposit CdO : In films on sapphire α - Al2O3 (006) and quartz substrates with thickness of about 150±10 nm for all CdO : In nanofilms at different deposition condition and the number of laser pulses was 150 pulses. The x - ray diffraction (XRD) analysis was used to determine structural properties of the prepared films,the structure of the cadmium oxide has a cubic unit cell with highly orientated in the (111) direction. In the CdO : In films on sapphire substrate with a smallest grain size (16.52nm) are achieved at a ratio of doping (7%). This indicates the superior crystallinity of the film, which also has observed from the atomic force microscopy (AFM) images. The surface morphology of the deposit materials has been studied by using AFM. The samples are displayed granular structure, the grain sizes have been decreased with increasing of doping concentration ratio, the smallest grain size equal to (79.11 nm) and (82.99nm) are achieved at a ratio of doping (7%) for quartz and sapphire α - Al2O3 substrate, respectively, from the scanning electron microscope (SEM) images of the pure CdO and CdO : In films are composed of spherical grains of small with the size (60 - 80) nm . UV - VIS transmittance measurements have been shown that the films are highly transparent in the visible wavelength region, with an average transmittance of (93%). The optical band gap of the films has been found to be in the range (3.25 - 3.15) eV according to the nanostructure films by use photoluminescence (PL), the same results of energy gap value with simple difference and with small blue shift in peaks with increase of doped ratio, been found to be 2.45eV for pure CdO and it varies differently, in addition, the photoluminescence spectrum were analysed between (200 - 900) nm, all the films shown two kinds of luminescence transitions involved when the thin film is excited with wavelength 270 nm, the greatest intensities have been demonstrated in the near UV - Vis spectrum (445.2 nm). The activation energy for pure CdO was (0.228 eV) with quartz substrates, while (0.234eV) with α - Al2O3 substrates, this value decreases to (0.515 eV) when the film doping at (3%) with quartz substrates and (0.42eV) with α - Al2O3 substrates. The prepare films have been determined as an that n - type semiconductor films by the hall Effect measurements. The sensitivity measurements behavior measurements of CdO films with different doping concentrations of In2O3 under (3% NO2 : air) and bias voltage (3Volt). The optimal operating temperature is found to be 200 - 225°C for pure CdO and decreases to (175 - 200) °C for the samples. The maximum sensitivity is equal to (263.97%) with response time (13.5s) and recovery time (15.5s) was achieved at (3%) doping concentration level for α - Al2O3 substrate. The sensitivity of samples has been decreased when increasing of doping level

تحضير SnO2 النانوي ودراسة تاثير التشويب على الخواص التركيبية والبصرية Preparation SnO2 nanoparticles and Study the Effect of Doping on Structure and Optical Properties

اسم المؤلف: كرار امين قدوري محمد
اسم المشرف: طارق عبد الرضا علوان الظاهر
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا البحث تحضير مسحوق SnO2 النانوي النقي المحضر من املاح القصدير المتمثلة بملح SnCl4.5H2O بطريقة الصول - جل بثلاثة مذيبات مختلفة وهي الماء، والميثانول، والايثانول، وتم اجراء عملية التلدين عند درجة حرارة (400°C) .تم اختيار المذيب الايثانول لاعطائه اكبر كمية من المسحوق ومطابقته للملف ذي الرقم (JCPDS : 41 - 1445) لتحضير العينات المشوبة (بالنيكل والمغنيسيوم والكادميوم) كل على انفراد وبثلاثة تراكيز (5, 10 و%15) من كل عنصر ثم اجريت عملية تلدين لهذه العينات لدرجة (700°C).اظــهرت نتائج حـيود الشعاع السيني ان جــميـع العينات المحـضـرة تمتلك نظاما رباعيا متعددة التبلور وفحصت العينات للمدى الزاوي (°20 - °100)، وظهرت السطوح الاربعة الاعلى شدة وهي ((110, (101), (200), 211))، تم حساب الحجم الحبيبي بطريقة ديباي - شيرر وبطريقة وليامسون - هول، وبينت النتائج ان حجم الحبيبات يقل بزيادة نسبة التشويب، كما تم حساب العديد من المعلمات التركيبية كثوابت الشبيكة وفسحة السطوح، والكثافة، والمساحة السطحية النوعية، وعدد خلايا الوحدة، وكثافة الانخلاعات، والاجهادات المجهرية وعامل التشكيل وعامل طبيعة السطح. اوضحت نتائج فحوص (AFM) طبيعة السطح للعينات المحضرة، وقد تم حساب معدل الحجم الحبيبي، ومعدل الخشونة، وقيمة جذر مربع المعدل(RMS) وكانت مختلفة من حيث معدل خشونة السطح. حيث تقل الخشونة بزيادة نسبة التشويب، ويقل معدل قطر الحبيبات بزيادة نسبة التشويب التي اتفقت مع نتائج حيود الشعاع السيني وكانت تتراوح ما بين (127.71 - 69.64) nm، وقد اظهرت صور (SEM) ان اشكال الحبيبات النانوية للنماذج (P4,N3,M3,C3) كروية او شبه كروية متجمعة بهياة عناقيد وظهر البعض منها بشكل متكتل. اما بالنسبة لفحص (EDX) فقد اظهرت جميع العينات قمة عالية عند ~3.5) keV) للقصدير مع ظهور قمم صغيرة لعنصر الكلور والبوتاسيوم التي عدت كشوائب بنسب وزنية ضئيلة جدا نتيجة عملية التحضير للعينة النقية، اما العينات المشوبة فقد اظهرت قمم مادة التشويب بالاضافة الى القصدير الا ان الاوكسجين لم يظهر في فحص (EDX).ومن خلال تسجيل طيـف الامتصاص لمحلول SnO2 وضـمن مــدى الاطــوال الموجـية (300 - 900 nm)، اوضحت النتائج ان الامتصاصية تزداد بزيادة نسبة التشويب لجميع العينات، اما فـجـوة الـطاقة البصرية للانتقال الالكتروني المباشر الـمـسـمـوح باستعمال معادلة (Tauc) وباستخدام معادلة (Kubelka - Munk) فقد وجد انها تقل بزيادة نسبة التشويب. | In this research, pure SnO2 Nanopowders were prepared from tin salt (SnCl4.5H2O) by sol - gel method using three different solvents; water, methanol and ethanol. The preparered powders annealed at temperature (400°C). according to the result of prepared powder, the sample of ethanol as a solvent is taken into consideration due to the greater amount of the powder is produced and it’s in a good agreement with the File No. (JCPDS : 41 - 1445). The preparation of doped samples is performed using ethanol as a solvent with each one of the dopants (Nickel, Magnesium and Cadmium) with three percentages (5, 10 and 15)% of each element. Then nine prepared doped samples as well as the pure one were annealing at (700°C).XRD results show, all prepared samples have polycrystalline tetragonal crystal system. The scan of x - ray in the range of Bragg’s angle (20 - 100)° which revealed the four highest intensity peaks, (110),( 101),( 200) and ( 211)planes. From the diffraction pattern of each sample, the crystallite size is calculated by Debye - Sherrer and Williamson - Hall methods. Their results showed that grain size decreases with increasing ratio of doping concentration, also there has been many parameter likes; lattice constants, interplanar distance, specific surface area, number of unit cells, intensity, dislocations density and macrostrain which are calculated. AFM test revealed the morphology of the prepared samples. Their grain size, roughness and average root mean square value (RMS) are different for each sample. Surface roughness decreased with the increase of the dopant percentage. The average grain size was ranging between (69.64 - 127.71) nm and is decreased with the increase of dopant percentage and this show a good agreement with the XRD results. SEM for the sample (P4, N3, M3 and C3) revealed spherical or semi - spherical nanoparticles agglomerate in the form of a cluster. While EDX test shows a high peak at (~ 3.5)KeV of the Tin, with small peaks of chlorine and potassium which are considered as impurity and that is due to its small quantity which is resulted from the process of preparation of pure sample. In the doped samples, the peaks of dopant elements appeared in addition to that of tin, but the oxygen does not appear.UV spectra for all samples are performed by dissolving some amount of the powder in the double distilled water in the range (300 - 900) nm, their results show the absorbance increases with the proportion of dopant concentration of all samples. The optical energy gap for allowed direct transition are calculated by using Tauc and Kubelka - Munk equations, which decrease with the increase of dopant percentage.

دراسة الخصائص التركيبية والكهربائية والمغناطيسية للفرايت النانوي ذي التركيب المغزلي المحضر بطريقة السول (NixCu0.2Zn0.8 - xFe2O4) - جل ذات الا حتراق التلقائي Studying Structural , Electrical and Magnetic Properties for Nano Spinel Ferrite of (NixCu0.2Zn0.8 - xFe2O4) Prepared by Sol - Gel Auto Combustion Method

اسم المؤلف: عمار عيسى عباس نجم الربيعي
اسم المشرف: احمد رفيق عبد المجيد
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: In this research , Nano spinel ferrite (NixCu0.2Zn0.8 - xFe2O4) was synthesized using sol - gel auto - combustion and flash combustion methods .Nineteen samples were prepared and their studies were divided into three parts. Study the effect of citric acid in preparation of Nano ferrite (Ni0.1Cu0.2Zn0.7Fe2O4) by changing the molar ratio of adding fuel to any sample and the five samples were prepared from (C series). The structural properties of samples were studied using x - ray diffraction technique (XRD) and scanning electron microscope (SEM) which showed that the obtained ferrite possesses spinel cubic phase for all used molar ratios , besides when the concentration of adding fuel was increased leads to decrease in grain size and theoretical density , increase in dislocation density and the surface area. Then the molar ratio (1 : 1 M) was chosen as the best adding ratio due to that the obtained ferrite at this ratio possesses best texture coefficient with small grain size and best internal strain by comparing with the other ratios.  Study the influence of substitute (Zn+2) ion by (Ni+2) ion on the structural , electrical and magnetic properties of Nano ferrite powder (NixCu0.2Zn0.8 - xFe2O4)(0.1≤X≤0.7) synthesized using sol - gel auto - combustion method , there are seven samples were prepared (A) series and tested by two types of structural test included analyzer x - ray diffraction and scanning electron microscope, the results exhibited forming the spinel phase for all samples in spite of the substitute of (Zn+2) ion by (Ni+2) ion, and the increase of (Zn+2) ions concentration leads to decrease in the grain size and increase in theoretical density. Then the ferrite powder was divided in two groups, the first was pressed into the pellet shape which was used in electrical tests and the second group was pressed into the rings shape which was used in magnetic tests. The two faces of the pellets in first group polished by silver paste material in case to obtain a ceramic capacitors that subjected to electrical tests which included the measurement of dielectric constant , dielectric loss coefficient, alternating electrical conductivity and direct electrical conductivity ,and the study of magnetic properties for the rings samples included measurement of hysteresis loop , selfinduction, initial permeability and the relative loss factor. The results of electrical tests exhibited decrease in dielectric constant with frequency increase at room temperature , and dielectric constant increases at certain ratios of adding (Zn+2) ions and decreases at other ratios. However , the dielectric loss coefficient its fall when increasing frequency until reaches its lowest value at the high frequencies values and so it is various when the concentrations of (Zn+2) ion were changed .and the measurement of alternating electrical conductivity displaying it increases with the increasein frequency and it values disparity with the change of (Zn+2)ion concentration , in other hand the direct electrical conductivity increase with substituting (Zn+2) ion concentration increases. The magnetic tests results exhibited that the ratio (X=0.3) with chemical formula (Ni0.3Cu0.2Zn0.5Fe2O4) possesses a significant magnetic properties when compared with other samples because it has the highest initial permeability with lowest relative loss factor and it has best hysteresis loop so that it realized conditions for using it as a cores in transducers and electrical motors. Study the influence of substituting (Zn+2)ion by (Ni+2) ion on the structural properties of Nano ferrite (NixCu0.2Zn0.8 - xFe2O4)(0.1≤ X≤ 0.7) synthesized using flash combustion method, there are seven samples were prepared (F) series tested by two types of structural tests included xray diffraction and scanning electron microscope tests , and the results exhibited form the spinel phase for all samples and no other phases were presented and observed that structural results were agreed with these obtained from sol - gel auto - combustion method.

دراسة تحليلية للحام بالليزر على الخواص الحرارية - الميكانيكية للبوليمرات باستخدام برنامج ANSYS Analysis Study of Laser Welding on Thermal - Mechanical Properties of Polymers Using ANSYS Program

اسم المؤلف: زينه يونس علي
اسم المشرف: خالد هادي مهدي العبيدي ندى فاضل توفيق
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: الخلاصةان الهدف من هذه الدراسة, هو التنبؤ بسلوك المواد من حيث الخصائص التركيبية ,الحرارية والميكانيكية اثناء عملية اللحام في 3 - D. ان دراسة الخصائص التركيبية للمادة قد تم باعتبارها دالة لدرجة حرارة الانتقال الزجاجي T_g, ودرجة حرارة الانصهار T_m, وتغير الطور بينما يتم دراسة الخصائص الحرارية وفقا لتوزيع درجات الحرارة, والتدرج الحراري, والفيض الحراري, واخيرا يتم دراسة الخواص الميكانيكية بواسطة الاجهاد والمطاوعة.لقد تم تبني طريقة FEM لمحاكاة عملية اللحام لقطعتين متشابهتين ومختلفتين من مادة البولي بروبلين والبولي ستيرين في ثلاثة ابعاد. ان تحليل الخصائص الحرارية والميكانيكية لبوليمر البولي بروبلين والبولي ستيرين قد تم بدلالة كل من نموذج الحالة المستقرة والنموذج المتنقل باستخدام برنامج ((ANSYS 11. حيث ربط نموذج الحالة المستقرة (اعتبرت انها الحمل الابتدائي) مع نموذج الحالة المتنقلة بافتراض وجود الحمل الحراري والميكانيكي سوية بنفس الوقت على اعتبار ثبوت سرعة اللحام عند20ملي/ثانية ودرجة الحرارة عند 298م, وكذلك تم اختبار تاثير قدرة الليزر باستخدام ثلاثة قيم 50) (150,100 واط, كذلك درست تاثير نصف قطر بقعة الليزر على خصائص البوليمرات المستخدمة.بينت النتائج العددية قابلية لحام كل من المادتين البولي بروبلين والبولي ستيرين بهذه الطريقة, حيث لوحظ تناقص التشوهات الحرارية والميكانيكية الناجمة عن اللحام, كما يشير الشكل الهندسي هذه الاجهادات الى جودة اللحام. وبينت الدراسة ان كل من الفيض الحراري والانحدار الحراري يكون عند اعظم قيمها في اتجاه y - axis وهو اتجاه تسليط الليزر, وكانت درجة الحرارة العظمى في لحام كل من PP - PPو PP - PS هي ((351.4kو (425.9k) على التوالي. اما الاجهادات الميكانيكية فقد كانت واطئة في كل من PP - PPو PP - PS بحدود (0.181*〖10〗^9MPa ) و(0.166*〖10〗^9MPa) والمطاوعة (0.171) و(0.142) لكل من PP - PP وPP - PS على التوالي. واخيرا، لوحظ صغر مساحة المنطقة المتاثرة حراريا اذ كانت بحدود (9.2 〖mm〗^2) بالنسبة ل PP - PP، في حين اظهر عمق الاختراق تحسن مقارنة مع الاساليب المستخدمة، حيث كانت قيمته بحدود (2.5mm), اما في نموذج المتنقل فقد لوحظ تضاعف المساحة المتاثرة وعمق اختراق قريب من نتائج النموذج المستقر. | The aims of this study is to estimate the material behavior properties in terms of its structure, thermal and mechanical properties during welding process in 3 - D. The structure is studied as a function of T_m , T_g and phase change. While the thermal is investigated according to thermal distribution, thermal gradient and thermal flux. Finally the mechanical is examined by stress and strain.Finite element method is adopted to simulate welding process of two similar and dissimilar pieces of polypropylene and polystyrene in 3 - D.The analytical of thermal and mechanical properties is done in terms of steady - state model and transient model using ANSYS 11 program, then coupling the steady - state with transient model by supposed existing thermal and mechanical loads together in same time. Laser power effect on welding is investigated by three powers (50,100,and 150watt) and by laser spot radius (1mm, and 2mm), the welding speed is supposed constant at (20mm/sec).Numerical results show that the ability of this method to joined polymers material PP and PS, where it is noticed that the thermal and mechanical deformations are reduced, also the geometry shape of welding zone is indicated to a good quality of welding.From this study, the thermal gradient and thermal flux are at their maximum values at y - axis, in which the laser direction, and T_max in PP - PP and PP - PS joints are (351.4k) and (425.9k) respectively. Mechanical stresses and strains had low values, about (0.181*〖10〗^9MPa) and (0.166*〖10〗^9 MPa) and strain are about (0.171) and (0.142) for PP - PP and PP - 1PS joint respectively.Finally, it is observed that narrow HAZ area (9.2〖mm〗^2) of PP - PP joint, while penetration depth shows improvement comparing with usual methods, it's value is (2.5mm). In transient model it observes that multiples of HAZ area, and D_p is near its value in steady - state model.

الخواص التركيبية والبصرية والكهربائية لاغشية اوكسيد النيكل المحضرة بطريقة الترذيذ كمتحسس غازي The structural, optical and electrical properties of NiO films prepared by RF - Sputtering as gas sensor

اسم المؤلف: زينب طارق عبد الحميد
اسم المشرف: قاسم عزيز محمد محمد عبد النبي
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The structural, optical, electrical, and gas sensing properties of nickel oxide have been studied. The structural properties of the deposited films were made using XRD, SEM and AFM. The NiO films have been prepared with different thicknesses (100, 150 and 200) nm on glass, Si and Al2O3 substrates, using RF - sputtering at 100°C substrate temperature. The electrical and optical parameters of the NiO films were characterized using Hall Effect and transmittance measurements.The X - ray diffraction result indicates that the films are of polycrystalline in nature with cubic structure. The grain size of the nanoparticales observed at the surface depended of films thicknesses, where 200 nm has smallest average grain size 85.5 nm and RMS increased with increasing of thicknesses.The optical characterization shows that the film has band gap that ranged in between 3.6 eV to 3.9 eV, the average transmittance of films was found to be ranged of 60% to 85% in the VIS - IR regions. The dark conductivity of NiO films has been studied as a function of film thickness, crystal structure transformation and temperature with particular regard to gas sensitivity in CO2, NO2, CO, NO and the ethanol vapor. The electrical properties were found to be dependent on the film thickness.I - V characteristics for NiO films at (air, vacuum, N2, O2andCO2) gases before and after annealing were investigation. It would appear from our result that the diminution of the dark conductivity after annealing may be due to the surface contaminations adsorbed on the surface of the NiO film during film preparation or from ordinary atmospheric air.The resistivity of the NiO thin films decreased with increasing of thicknesses, from 1.5x105 to 5.4x104 (Ω.cm), which is related to the increase of carrier concentration with film thickness. The results of measurements of NiO thin films show that these films have good conductivities and results obtained from Hall Effect indicate that the NiO films were (p - type).It was found that the sensitivity to other gases differs for different film thicknesses and working temperature. Furthermore, NiO films exhibits high and fast response to NO2 gas at 200°C, which makes it a promising candidate for a poisonous gas sensing.

تحضير ودراسة الخواص الكهربائية والبصرية لاغشية NiO الرقيقة غير المشوبة والمشوبة بالنحاس لتطبيقات متحسس الغاز Preparation and study the electrical and optical properties of undoped and Cu doped NiO thin films for gas sensor applications

اسم المؤلف: رانيا رعد كاظم الكناني
اسم المشرف: انوار حسين علي الفؤادي
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في العمل الحالي، تم تحضير اغشية رقيقة جيدة باستخدام تقنية منخفضة التكلفة وهي الرش الكيميائي الحراري, تم قياس الخصائص التركيبة , البصرية والكهربائية, والتحسسية لاغشية اوكسيدالنيكل غير المشوبة والمشوبة بالنحاس عند النسب ((1%,3%,5%,7%المرسبة على قواعد زجاجية مسخنة ب درجة حرارة c o (10 ± 400) وبسمكnm ( 10± 250 ) ، من حيود الاشعة السينية وجد ان جميع الاغشية النقية والمشوبة لها تركيب مكعبي , وبصورة عامة هناك زاويتي حيود عند المدى الزاويo 30 - 60)) تعود للسطحين (111)و(200) . وجد ان الحجم الحبيبي يزداد مع زيادة نسب التشويب حتى نسبة 3% ثم تنخفض قيمته عند النسب 5%, 7% ,ومن خلال قياسات ماسح القوة الذرية AFM وقياسات المجهرالالكتروني الماسح SEM تم التعرف على تاثير التشويب على جميع خواص الاغشية, كما تبين من نتائج التشويب ان زيادة التشويب تؤدي الى االزيادة في الحجم الحبيبي عند النسب (1%و3%) ثم ينخفض عند النسب (5% و7%). اشتملت الرسالة دراسة الخواص البصرية لاغشية اوكسيد النيكل غير المشوبة والمشوبة بالنحاس , وتبين ان فجوة الطاقة تقل من3.8 - 2.8) ev ) بزيادة نسبة التشويب. وجد ان الاغشية لها معامل امتصاص عالي cm(α>10 ) الذي يؤدي الى زيادة احتمال حدوث الانتقالات المباشرة بين المستويات البلورية وبينت النتائج ان معامل الامتصاص يزداد مع زيادة نسب التشويب. وقد اظهرت نتائج الخواص الكهربائية (D.C) زيادة التوصيلية الكهربائية مع زيادة التشويب لتصل اعلى قيمة لها عند نسبة 7%. وقد وجد ان لجميع الاغشية طاقات تنشيط تقل مع زيادة نسبة التشويب. من قياس تاثير هول وجد ان تحركية حاملات الشحنة تقل وتركيز الحاملات تزداد مع زيادة نسب التشويب . اما خصائص التحسسية لجميع الاغشية المحضرة تم قياسها للابخرة (NH ,H O )عند تراكيز مختلفة ppm(100,200,300) عند درجة حرارة ,150° c واظهرت النتائج ان افضل تحسسية كانت عند نسبة تشويب 5% لبخار NH , وقد وجد ان هناك زيادة خطية للتحساسية مع زيادة تركيز البخار. وهذا بسبب زيادة كمية البخار الذي يتفاعل مع سطح الغشاء الرقيق. | In the present work, a good adherent and smooth films of undoped and copper doped NiO have been prepared by using low cost spray pyrolysis technique at different percentage of copper concentration ,structural, optical, electrical, and sensing properties have been studied at different concentrations of Cu (1% ,3%,5%,7% ) deposited on glass substrate at temperature (400±10) oc with (250±10)nm thickness . From the X - ray diffraction investigation, the crystalline structure of thin films was a polycrystalline with a cubic structure , generally the peaks of the NiO and NiO : Cu thin films were observed at diffraction angles at the range (37°and 43°). All NiO : Cu thin films display peaks of (111), (200) and Cu peaks do not appear even after adding a higher quantity of Cu into the NiO films, the angle position of peak (111) shifted toward lower value with doping in Cu at 1%,3% then start to increases at 5%,7% concentration,resulting in the increasing of lattice constant (a),interplaner spacing (d) and crystallite size (D),then decreases due to the degradation in the crystallinity of NiO doped with 5%,7% respectively,surface analysis by SEM and AFM have been used to understand the effect of the doping on morphology properties of the samples. The doping resulted in increasing grain at doping rates (1%,3%), then decreases at doing rates (5%,7%). The measurements of optical properties of undoped and copper doped NiO films decreased with increasing the doping rate.Also the results have showed that absorption cofficient increases with doping to reach maximum value at 7% concentration .The energy gap of was calculated for undoped and copper doped NiO films,it is noticed that the energy gap decreases with the increases of doping until it reaches the minimum value at 7% doping concentration .The D.C measurements show that the resistivity decreased with increasing doping rate,also the hall measurements have been showed the carrier concentration increased with increasing doping rate. The AFM results reveal that the grain size increases with the increase in copper concentration at rates (1%,3%) and then decreased at rates (5%,7%).The sensing measurements showed that undoped and copper doped NiO thin films have high sensitivity to NH vapor as compared to H O vapor , and the best result was 26% at doping rate 5% at 300ppm vaopr concentration ,at operation temperature 150 o c for NH vapo