عرض: 25 50 75 100 النتائج

نتائج البحث: 25 من أصل 2,023

تصميم منظومه تفريغ حاجز الجهد العازل ودراسه تاثير البلازما غير الحراريه المنتجه في الضغط الجوي على بعض خصائص كاشف الاثر النووي CR - 39 == Design of Dielectric Barrier Discharge and Study the effect of Atmospheric Pressure non thermal Plasma on some Properties of CR - 39 track Detectors

اسم المؤلف: فاطمه علي خضير
اسم المشرف: حامد حافظ مربط
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: فيزياء البلازما
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الدراسة تم تصميم وتصنيع منظومة تفريغ حاجز الجهد العازل Dielectric Barrier Discharge تعمل هذه المنظومة على انتاج البلازما غير الحرارية عند الضغط الجوي الاعتيادي، تتالف المنظومة من قطبين مصنوعين من الستانلس ستيل بقطر(50ملم) ومعزولين بمادة التفلون بقطر (10) ملم,القطب الاعلى ثابت والقطب الاسفل مثبت على منصة قابلة للحركه للاعلى والاسفل لاجل تغير المسافه مابين الاقطاب. تم استخدام نوعين من المواد العازله بين الاقطاب : الزجاج والتفلون وباسماك مختلفه لكلا المادتين (1,2,3) mm وذلك لغرض المقارنه. تم دراسة خصائص المنظومة الكهربائية من رسم منحني تيار - فولتية وفولتية الانهيار الصامت لكل مادة عازلة ولثلاثه مسافات فاصلة بين الاقطاب (1,2,3 mm). حيث وجد انه بزيادة المسافة بين الاقطاب من (1الى 2الى3) ملم تزداد فولتية الانهيار. كذلك وجد ان قيم التيار تزداد بنقصان المسافة بين الاقطاب ،وكذلك شملت هذه الدراسه تاثير سمك الماده العازله المستخدمه على فولتيه الانهيار وقد وجد ان زياده سمك الماده العازله تؤدي الى زياده قيمه فولتيه الانهيار.وقد تم ايضا دراسه تاثير تردد فولتية التفريغ على قيم تيار التفريغ باخذ قيم التردد (50, 1000, 500, 750, 1250) هيرتز . تم دراسة تاثير البلازما الغير حراية الناتجة من المنظومة على كاشف الاثر النووي الصلبه، حيث تم تعريض كاشف الاثر النووي من نوع CR - 39 المشعع بجسيمات الفا من مصدر الفا ( الراديوم - 226) الى البلازما الناتجة من المنظومة لفترات زمنية (60 - 1) ثانية، وقد وجد ان اثار جسيمات الفا على الكاشف تظهر بعد ( 10) ثانية من تعريض الكاشف للبلازما وتزداد كثافة الاثار على الكاشف بزيادة زمن التعريض الى ان تصل لقيمتها العظمى عند الزمن (50) ثانية ثم تبدا بلاختفاء. | In this study the design and manufacture of Dielectric Barrier discharge system was done. This system works to produce non - thermal plasma at normal atmospheric pressure. It consists of two electrodes made of steel (stainless steel) with radius (50mm) and isolated with Teflon of radius (10mm), the upper electrode is fixed and the lower is plaud on a movable stand that can move upper and lower to control the distance between the electrodes. Two types of isolated materials are used between the electrodes with different thicknesses. The properties of the designed system was studied from the current - voltage characteristics curve and silent discharge voltage for every insolate matter and for three distances between electrodes (1,2,3)mm. It is found that with increasing the distance between the electrodes from (1 to 2 to 3) mm discharge voltage increases and it's also found that the value of current increases with decreasing distance between electrodes.This study also included the study of the effect of the insolated matter thickness on discharge voltage. It's found the increasing of the isolated matter thickness lead to increase the value of discharge voltage and we also studied the effect of frequency of discharge voltage on the value of discharge current for different values of frequency (50,500.750.1000.1250) HZ.The effect of non - thermal plasma that was produced from the system on Solid State Nuclear Track Detectors has been studied where State Nuclear Track Detectors type CR - 39 radiated by alpha particle from alpha source (Radium - 226) is exposed by plasma produced from the system for time from (1 - 60 sec) it is found that the effect of alpha particle on detector is appears after (10) sec from exposure of detector to plasma and the number of tracks on detector will increase by increasing the time of exposure so it reach it's maximum value at time 50 sec and begin to disappear

دراسة الخصائص التركيبية والكهربائية والمغناطيسية للفرايت النانوي ذي التركيب المغزلي المحضر بطريقة السول (NixCu0.2Zn0.8 - xFe2O4) - جل ذات الا حتراق التلقائي == Studying Structural , Electrical and Magnetic Properties for Nano Spinel Ferrite of (NixCu0.2Zn0.8 - xFe2O4) Prepared by Sol - Gel Auto Combustion Method

اسم المؤلف: عمار عيسى عباس نجم الربيعي
اسم المشرف: احمد رفيق عبد المجيد
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: In this research , Nano spinel ferrite (NixCu0.2Zn0.8 - xFe2O4) was synthesized using sol - gel auto - combustion and flash combustion methods .Nineteen samples were prepared and their studies were divided into three parts. Study the effect of citric acid in preparation of Nano ferrite (Ni0.1Cu0.2Zn0.7Fe2O4) by changing the molar ratio of adding fuel to any sample and the five samples were prepared from (C series). The structural properties of samples were studied using x - ray diffraction technique (XRD) and scanning electron microscope (SEM) which showed that the obtained ferrite possesses spinel cubic phase for all used molar ratios , besides when the concentration of adding fuel was increased leads to decrease in grain size and theoretical density , increase in dislocation density and the surface area. Then the molar ratio (1 : 1 M) was chosen as the best adding ratio due to that the obtained ferrite at this ratio possesses best texture coefficient with small grain size and best internal strain by comparing with the other ratios.  Study the influence of substitute (Zn+2) ion by (Ni+2) ion on the structural , electrical and magnetic properties of Nano ferrite powder (NixCu0.2Zn0.8 - xFe2O4)(0.1≤X≤0.7) synthesized using sol - gel auto - combustion method , there are seven samples were prepared (A) series and tested by two types of structural test included analyzer x - ray diffraction and scanning electron microscope, the results exhibited forming the spinel phase for all samples in spite of the substitute of (Zn+2) ion by (Ni+2) ion, and the increase of (Zn+2) ions concentration leads to decrease in the grain size and increase in theoretical density. Then the ferrite powder was divided in two groups, the first was pressed into the pellet shape which was used in electrical tests and the second group was pressed into the rings shape which was used in magnetic tests. The two faces of the pellets in first group polished by silver paste material in case to obtain a ceramic capacitors that subjected to electrical tests which included the measurement of dielectric constant , dielectric loss coefficient, alternating electrical conductivity and direct electrical conductivity ,and the study of magnetic properties for the rings samples included measurement of hysteresis loop , selfinduction, initial permeability and the relative loss factor. The results of electrical tests exhibited decrease in dielectric constant with frequency increase at room temperature , and dielectric constant increases at certain ratios of adding (Zn+2) ions and decreases at other ratios. However , the dielectric loss coefficient its fall when increasing frequency until reaches its lowest value at the high frequencies values and so it is various when the concentrations of (Zn+2) ion were changed .and the measurement of alternating electrical conductivity displaying it increases with the increasein frequency and it values disparity with the change of (Zn+2)ion concentration , in other hand the direct electrical conductivity increase with substituting (Zn+2) ion concentration increases. The magnetic tests results exhibited that the ratio (X=0.3) with chemical formula (Ni0.3Cu0.2Zn0.5Fe2O4) possesses a significant magnetic properties when compared with other samples because it has the highest initial permeability with lowest relative loss factor and it has best hysteresis loop so that it realized conditions for using it as a cores in transducers and electrical motors. Study the influence of substituting (Zn+2)ion by (Ni+2) ion on the structural properties of Nano ferrite (NixCu0.2Zn0.8 - xFe2O4)(0.1≤ X≤ 0.7) synthesized using flash combustion method, there are seven samples were prepared (F) series tested by two types of structural tests included xray diffraction and scanning electron microscope tests , and the results exhibited form the spinel phase for all samples and no other phases were presented and observed that structural results were agreed with these obtained from sol - gel auto - combustion method.

الخواص الكهربائية والتركيب الدقيق لمقاوم اوكسيد الخارصين السيراميكي المتغير المطعم بالاتربة النادرة == Electrical Properties & Microstructure Of ZnO - Based Varistor Ceramics Doped With Rare Earth

اسم المؤلف: عادل اسماعيل كاظم
اسم المشرف: ايسر جمعة ابراهيم | عبد الحميد رحيم مهدي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يعد اوكسيد الخارصين (ZnO) السيراميكي مادة شبه موصلة نوع - n، ويلعب دورا هاما في مدى واسع من العمليات الصناعية والمنتجات التجارية.ان من اكثر الاستعمالات اهمية استعماله لحماية الدوائر الكهربائية والمعدات الالكترونية من الجهد الزائد المدمر نتيجة البرق او الناتج من الارتفاع الكبير والمفاجيء في قيم الجهد الكهربائي, وتسمى المقاوم المتغير المعدني (Metal Oxide Varistor MOV) . يعد المقاوم المتغير نبيطة ذات سلوك غير اومي وخواصه الكهربائية تشبه تقريبا في عملها ثنائي زينر. لغرض دراسة وتوصيف مركبات مقوم اوكسيد الخارصين السيراميكي المتغير وتحسين خواصه الكهربائية, تم تحضير مركباته باضافة بعض الاكاسيد المعدنية وهي Bi2O3، Sb2O3، Co3O4، Cr2O3، وMnO2, حيث تم اختبار تاثيرها لوحدها اولا, وثانيا تم اضافة اكاسيد الاتربة النادرة (M2O3) مع الاكاسيد المذكورة اعلاه واختبار تاثيرها على المقاوم المتغير, حيث ان (M=Dy, La,Y) وبتراكيز مولية ( *10 - 3(1,5,10)).تمت عمليات التحضير والسيطرة على التركيب الدقيق عن طريق التحكم بظروف عمليات الحرق بدءا من عملية الاعداد بخلط اوكسيد الزنك مع الاكاسيد المضافة ومن ثم الحرق في درجة حرارة 600℃ وبمعدل 5 ℃⁄min في الفرن ولمدة ساعتين للعينات جميعها وذلك لازالة الغازات والرطوبة من المساحيق. بعد عملية الحرق تم كبس المساحيق بشكل اقراص بقطر 15mm وسمك 2mm تقريبا تحت ضغط يساوي 25MP.بعد عملية الكبس اجريت عملية التلبيد (تفاعلات الاطوار الصلبة والاطوار السائلة) بدرجات حرارة مختلفة ( 1050, 1100, 1150 ℃ ) وزمن ثابت للعينات جميعها مقداره ساعتين للحصول على الاشكال النهائية والوصول الى الخصائص المطلوبة.تمت دراسة بعض الخواص الفيزيائية للعينات المحضرة وهي الكثافة والمسامية والخواص التركيبية وذلك لغرض تقييم تاثير الاكاسيد المضافة وظروف التحضير على سلوك التطبيق الصناعي للعينات.وقد تبين ان مقدار الكثافة النسبية والمسامية تتاثر بدرجة حرارة التلبيد وبنسب تراكيز اكاسيد الاتربة النادرة المضافة ونوعها,فقد ازداد مقدار الكثافة بازدياد درجة حرارة التلبيد ونسبة او تركيز اكاسيد الاتربة النادرة المضافة ونتيجة لذلك فقد نقص مقدار المسامية.لقد اعطى اختبار التركيب المجهري للمادة المحضرة رؤية واضحة عن الانتشار والنمو الحبيبي , وان نتائج اختبار الاشعة السينية (XRD) اوضحت ان التركيب البلوري لها معيني قائم كما ان قيم (a, b, c) وحجم خلية الوحد قد ازداد بزيادة درجة حرارة التلبيد ونسب تراكيز الاكاسيد المضافة ونوعها.اظهرت الحبيبات النانوية والميكروية ضمن البحث الحالي تاثيرا كبيرا على الخصائص الكهربائية المدروسة والتي صممت لها اداة في المختبر لقياس معامل السلوك اللاخطي, مقدار جهد الانهيار , تيار التسرب, قابلية امتصاص الطاقة , انحدار الجهد وجهد الحدود الحبيبية.حيث تبين ان معامل السلوك اللاخطي يزداد بازدياد تركيز الاكاسيد المضافة وارتفاع درجة حرارة التلبيد ومن ثم يبدا بالنقصان بعد درجة (1100℃) بسبب تطاير وتبخر اوكسيد البزموث وطور(. (Zn7Sb2O12 بينما نقص مقدار جهد الانهيار وقابلية امتصاص الطاقة وانحدار الجهد بازدياد درجة حرارة التلبيد,اما تيار التسرب فقد ازداد مقداره بازدياد درجة حرارة التلبيد, وكذلك بالنسبة لجهد الحدود الحبيبية فقد ازدادت قيمها بازدياد درجة حرارة التلبيد. | ZnO is a ceramic material which tends to intrinsically form as an n - type semiconductor material, which plays an important role in a wide range of industrial processes and commercial products.One of most important usages is a Surge protection device which used to protect power and electronic equipment from the destructive transient overvoltage which arises from lightning or other large - magnitude surge, this device is called metal oxide varistor (MOV).Varistors are voltage dependent, non - ohmic devices whose electrical characteristics are almost similar to back - to - back Zener diodes.Improvement ZnO varistor performance accomplished by doping it by some metal oxides, Bi2O3, Sb2O3, Co3O4, Cr2O3, and MnO2, where they were testing their effect alone first, and second was added rare earth oxides (M2O3) with oxides mentioned above and test their effect on varistor, where (M = Dy, La, Y) and molar concentrations (10 - 3, 5*10 - 3, 10*10 - 3)The preparation process starts from mixing ZnO with additives, calcination at 600℃ in a furnace to remove the gases and the humidity from the powders. Then the calcined powders uniaxially pressed into discs (pellets) of 15 mm in diameter and 2 mm in thickness under a pressure equals to 25MP. After pressing the green pellets sintered under different temperatures (1050, 1100, 1150℃) and a fixed time to accomplish the final shapes and reach the desired properties of the samples.Then the densities of the samples were measured by using Archimedes Principle with mercury liquid to calculate the relative density and the porosity of each sample, and to study the effect of the sintering temperature and REO concentration, which already be obvious the effect of them. The microstructure test of the material prepared gave a clear vision for the diffusion and grain growth, although the results of XRD test showed that the crystal structure is an orthorhombic, and the values of (a, b, c) and the size of a the unit cell has been increased with increase the sintering temperature and ratios of the concentration of oxides added and kind.Micro and nano grains within the present research showed a significant effect on the studied electrical characteristics, which designed a tool in the laboratory for it and to measure the nonlinear coefficient, the amount breakdown voltage, leakage current, the potential gradient, the energy absorption capability, and the voltage per grain boundary. It was found that the nonlinear coefficient increases with the increasing of REO concentration added and increasing sintering temperature and then starts decreased after degree (1100℃ ) due to volatilization and evaporation of bismuth oxide and spinel phase (Zn7Sb2O12).The amount of breakdown voltage, potential gradient, energy absorption capability decreased with rising the sintering temperature, while the leakage current has been increased with increasing the sintering temperature, as well as the voltage per grain boundary has been increased with increasing of the sintering temperature.

دراسة الصفات الحرارية والميكانيكية وعمر الاداء PVC لبوليمر == Study of the Thermal, Mechanical Properties and Lifetime of PVC Polymer

اسم المؤلف: صهيب صباح احمد
اسم المشرف: وداد حمدي جاسم | محمد عبد النبي ثجيل
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: In this work, mechanical behavior of PVC product like pipes with different origins (K.S.A and Egypt) and Turkey doors with different manufacturing (Nova and Firat) which are used in Iraqi markets were studied.The objective of this work was to study the mechanical properties like ultimate tensile strength, Young's modulus, elongation at Max., elongation at break, impact strength, flexural strength and hardness of the pipes and doors.The experimental results show that K.S.A pipes exhibited maximum ultimate tensile strength and Young's modulus than that the Egypt pipes.However, the Egypt pipes exhibited maximum elongation at Max. and elongation at break when compared with K.S.A pipes.All the tensile properties of Firat doors are greater than that of Nova doors.Comparison of the flexural strength of pipes and doors. The pipes have the same flexural strength but the Firat doors have maximum value than Nova doors.Egypt pipes have a higher impact strength than K.S.A pipes. While the Firat doors have a higher impact strength than Nova doors. The experimental results of hardness Shore D indicated that K.S.A pipes exhibited maximum hardness number (83.7) than Egypt one, while the Firat and Nova doors have the same values.In this study, thermal properties of Firat and Nova have been evaluated, firstly by thermal conductivity and second by thermal stability and degradation. The Firat doors have better thermal conductivity than that of Nova doors. From the thermogravimetric analysis at different heating rates (2, 5, 10, 20 and 40 °C/min). The Firat doors have a higher thermal stability than Nova one.The Egypt pipes exhibited more thermal stability than the K.S.A pipes.From the TGA curves the activation energy of pipes and doors are determined at different conversion levels. At 30% conversion level when the mechanism of degradation would be stable and the value of activation energy of Egypt pipes and Firat doors is (108.35 KJ/mole) when it is (101.39 KJ/mole) for K.S.A pipes and (98.35 KJ/mole) for Nova doors. Thermogravimetric analysis (TGA) provides a method for accelerating the lifetime testing of polymers so that short - term experiments can be used to predict in use lifetime.The lifetime is decreased with increase of the temperature, at fixed temperature like 70 °C the lifetime of Egypt pipes is (≈100 years) while lifetime of K.S.A pipes is (≈21 years). At the same temperature (70 °C) the lifetime of Firat doors is (≈72 years) while the lifetime of Nova doors is (≈21 years).Thermomechanical analysis (TMA) test showed the glass transition temperature (Tg) and softening point (Ts) for pipes and doors. The K.S.A pipes have value for Tg and Ts higher than that of Egypt pipes, while the Firat and Nova doors have the same values.

تصميم وتصنيع الطلاء المضاد للانعكاس معتمدين طريقة الليزر النبضي في الترسيب == DESIGN AND FABRICATION OF ANTI REFLECTION COATING BY PULSED LASER DEPOSITION

اسم المؤلف: زينب حازم عبد الرحيم
اسم المشرف: الاء نزار عبد الغفار | كاظم عبد الواحد عادم
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا العمل تم تصميم طلاء المضاد للانعكاس بسمك ربع ولاربع طول موجي ودراسة خصائص بصرية للاغشية الرقيقة والاستفادة منهما في تصنيع طلاء مضاد للانعكاس ضمن المنطقة المرئية والحمراء القريبة . اعتمد تصميم الطلاء على مفهومين اساسيين هما نظرية المصفوفة المميزة وتصميم طلاء بسمك ليس ربع طول موجي ولحالة السقوط العمودي للضوء.اخذين بنظر الاعتبار ظاهرة التشتت. تم دراسة نفاذية وانعكاسية الطلاء كدالة للتغير في الطول الموجي للضوء الساقط باستخدام الرزمة البرمجية MATLAB. اوضحت نتائج التصميم امكانية الحصول على انعكاسية واطئة لمدى واسع من الطيف الكهرومغناطسي يشمل المنطقة المرئية ومنطقة الحمراء القريبة عندما يكون السمك البصري ضمن المدى اقل 0.7L لمادة MgF2 المرسبة على الزجاج ويكافي الاسماك الهندسية للغشاء (34.5,36.91,78.3) نانومتر, وامكانية الحصول على انعكاسية واطئة لمدى واسع في درجة حرارة التلدين عند سمك البصري 1.2L ويكافى السمك الهندسي ((141.6 نانومتر. تكتسب هذه النتيجة اهميتها في امكانية تخمين السمك الامثل قبل البدء بمرحلة التحضير حيث اشارت النتائج الى معادلة تجريبية تربط بين عدد النبضات وسمك الغشاء. لغرض تصنيع الطلاءالبصري, تم استخدام طريقة الترسيب بالليزر النبضي لليزر النيديميوم - ياك1064 نانومتر الذي يعامل بتقنية التولد المتوافق الثاني بطول موجي 532 نانومتر والذي يعمل بتقنية عامل النوعية بمعدل تكرارية (1 - 6) هرتز وامد نبضة 10 نانوثانية. لتحضير اغشية فلوريد المغنيسيوم المرسبة على الزجاج, قمنا بدراسة ظروف التحضير التي تتضمن التغير بعدد النبضات (150و250 و350و 450 نبضة) لترسيب اغشية فلوريد المغنيسيوم ومدى تاثيرهم على سمك الاغشية المحضرة وتركيبها وحجم الحبيبات وبالتالي على نفاذيته ومدى امكانية استخدامه كطلاء مضاد للانعكاس. لقياس سمك الاغشية المحضرة, تم استخدام جهاز مقياس اللبسومتر وتم استخدام جهاز المطياف لايجاد النفاذية والانعكاسية والثوابت البصرية ومعاملي الانكسار والتوهين (n, k) وعلى التوالي. اوضحت النتائج بان الطلاء المضاد للانعكاس المحضر من طبقة واحدة يمتلك نفاذية عالية وانعكاسية واطئة تشمل منطقتين من الطيف المرئية والحمراء القريبة وان معامل الانكسار يتراوح بين (1.05 - 1.25( في حين كانت اسماك الاغشية المحضره تتراوح بين )34.5 - 141.6 ) نانومتر, كذلك اوضحت صور (AFM) بان الحجم الحبيبي يتراوح ضمن المدى (86.55 - 94.81) نانومتر. | In this work design and fabricated antireflection coating (AR’C) with single layer. Design of the AR’C was based on the characteristic matrix method with quarter and non - quarter optical thickness. The effect of deposited material at normal incident of light was taken into account and the reflection performance was computed with the aid of MATLAB over the visible and near infrared region. Results show that wideband AR’C was achieved when deposited thin film of MgF2 on glass with non - quarter optical thickness less 0.7L related to geometrical thickness (34.5,36.9,78.3 nm) at room temperature. Also wideband AR’C achieved with non quarter 1.2L optical thickness deposited related to geometrical thickness (141.6nm) at annealing temperature. However results accept significant importance to estimate the optimum thickness before preparation stage. In this study antireflection coating fabricated by using pulsed laser deposition technique (PLD) which deposit MgF2film on glass substrate. Q - switching Nd : YAG laser beam with second harmonic generation (SHG) technique of wavelength 1064 nm and 532 nm, repetition rate 1 - 6 Hz and the pulse duration 10 ns was used. The film thickness, structural behavior and grain size dependent on that prepared conditions which include variation number of shot (150,250,350,450 pulses) have been studied.The thicknesses of MgF2 nanostructure films were measured using Lipsometre. Further, the experimental results shows high transmittance, wideband low reflection and the refractive index within the range (1.05 - 1.25), while the thicknesses are (34.5 - 141.6 nm). Atomic force microscope (AFM) image illustrate that the grain size of the film within the range (86.55 - 94.81) nm

الخواص التركيبية والبصرية والكهربائية لاغشية اوكسيد النيكل المحضرة بطريقة الترذيذ كمتحسس غازي == The structural, optical and electrical properties of NiO films prepared by RF - Sputtering as gas sensor

اسم المؤلف: زينب طارق عبد الحميد
اسم المشرف: قاسم عزيز محمد | محمد عبد النبي
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The structural, optical, electrical, and gas sensing properties of nickel oxide have been studied. The structural properties of the deposited films were made using XRD, SEM and AFM. The NiO films have been prepared with different thicknesses (100, 150 and 200) nm on glass, Si and Al2O3 substrates, using RF - sputtering at 100°C substrate temperature. The electrical and optical parameters of the NiO films were characterized using Hall Effect and transmittance measurements.The X - ray diffraction result indicates that the films are of polycrystalline in nature with cubic structure. The grain size of the nanoparticales observed at the surface depended of films thicknesses, where 200 nm has smallest average grain size 85.5 nm and RMS increased with increasing of thicknesses.The optical characterization shows that the film has band gap that ranged in between 3.6 eV to 3.9 eV, the average transmittance of films was found to be ranged of 60% to 85% in the VIS - IR regions. The dark conductivity of NiO films has been studied as a function of film thickness, crystal structure transformation and temperature with particular regard to gas sensitivity in CO2, NO2, CO, NO and the ethanol vapor. The electrical properties were found to be dependent on the film thickness.I - V characteristics for NiO films at (air, vacuum, N2, O2andCO2) gases before and after annealing were investigation. It would appear from our result that the diminution of the dark conductivity after annealing may be due to the surface contaminations adsorbed on the surface of the NiO film during film preparation or from ordinary atmospheric air.The resistivity of the NiO thin films decreased with increasing of thicknesses, from 1.5x105 to 5.4x104 (Ω.cm), which is related to the increase of carrier concentration with film thickness. The results of measurements of NiO thin films show that these films have good conductivities and results obtained from Hall Effect indicate that the NiO films were (p - type).It was found that the sensitivity to other gases differs for different film thicknesses and working temperature. Furthermore, NiO films exhibits high and fast response to NO2 gas at 200°C, which makes it a promising candidate for a poisonous gas sensing.

تقييم المقاطع العرضية لليورانيوم للتفاعلات المستحثة بالنيوترون == Cross Sections Evaluation of Uranium for Neutron Induced Reactions

اسم المؤلف: روناك اكرام علي
اسم المشرف: ايمان طارق العلوي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: لقد تم في هذا البحث حساب قيم المقاطع العرضية لنظائر اليورانيوم (A=230 - 238) للتفاعلات المستحثة بالنيوترونات التالية ,,,(n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), (n,γ), (n,p), (n,t), (n,d), (n,α), (n,2α),and (n,2p)المقاسة بفترات مختلفة من الطاقة حيث ان هذه القراءات تم اخذها من الوكالة الدولية للطاقة الذرية (IAEA ) ومن المكتبات المشهورة عالميا مثل EXFOR, CINDA, ENDF, JEFF, JENDL,ROSFOND,CENDL,WIND, TENDL, BROND, IRDF, EAF وقد تم قياسها في الفترة الاولى من منتصف القرن الماضي وحتى اخر سنوات الماضية .لقد تم تحليل المديات الكاملة للطاقة لكل تفاعل وقد تم اعادة حساب وتقييم المقاطع العرضية ضمن فترات صغيرة مختلفة حسب مديات الطاقة للنيوترون القاصف مع الاخطاء المرافقة لها. قد تم وضع صيغ رياضية لمتعددة الحدود في معظم التفاعلات والتي تربط بين تغيير المقطع العرضي مع الطاقة والتي يمكن استخدامها للتنبىء بقيم المقاطع العرضية غير المحسوبة. لقد تم حساب قيمة Q - للتفاعل وطاقة الربط وطاقة العتبة وفرق الكتلة وعامل الرص لكل تفاعل ولكل عنصر هدف. ان التقييمات اعتمدت بشكل رئيسي على حسابات نموذج الجهد البصري لقد اعتمدت الحسابات على معاملات الجهد البصري النووي حيث تم اختيار وجمع المعلومات من مكتبة (RIPL) التابعة للوكالة الدولية للطاقة الذرية. لقد قمنا بدراسة صيغتين مختلفتين لنموذج الجهد البصري حيث ان الصيغة الاولى تسمى نموذج الجهد البصري القياسي والمعاملات ماخوذة من مكتبة Beijing والصيغة الثانية لنموذج الجهد البصري قد تم حسابها بتحديد ثلاث مديات طاقية. لقد قمنا بدراسة نسبة التفاعل (n,f) لكل نظير من نظائر اليورانيوم نسبة الى يورانيوم - 235 والذي يعتبر نموذج قياسي. لقد قمنا بحساب هذه النسبة لجميع التفاعلات المتوفرة لدينا وليس فقط تفاعل الانشطار واحتسبناها نسبة الى يورانيوم - 235.حساب اخر تم اضافته الى هذه الدراسة وهو دراسة تاثير التلوث لوليدة اليورانيوم - 237 والتي هي نبتونيوم - 237 بعمر نصفي 6.8 يوم وكذلك حساب الفيض النيوتروني لكل منهما. | The cross sections of Uranium isotopes (A=230 - 238) for the (n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), (n,γ), (n,p), (n,t), (n,d), (n,α), (n,2α),and (n,2p) reactions are calculated with different energy intervals which are collected from International Atomic Energy Agency (IAEA). The available cross sections data for the reactions mentioned above are collected from the well known international libraries like EXFOR, CINDA, ENDF, JEFF, JENDL, ROSFOND, CENDL, WIND, TENDL, BROND, IRDF, EAF and measured during the period from the middle of the last century up to several years ago.The cross sections are reproduced in fine steps of incident neutron energy in different intervals with the corresponding errors. The recommended cross sections for all available experimental data have been calculated for all considered reactions mathematical representative equations for all these reactions are formulated. These equations represent the variation of the cross section with energy, which could be used to predict the values of uncalculated cross sections.Q - value, threshold energy, binding energy, mass excess, and packing fraction for each reaction and target element have been also calculated.The evaluations are based mainly on the calculations of the optical model potential. The calculations are based on the nuclear optical potential, where the relevant parameters are collected and selected from Reference Input Parameter Library (RIPL) which is being developed under the international project coordinated by the International Atomic Energy Agency (IAEA). We study two different formula for optical model potential the first formula is the standard optical potential model and its parameters are taken from Beijing library. The second formula is the optical potential with different energy ranges. We study the ratio of the (n,f) cross sections for each Uranium isotopes relative to (n,f) cross section for U - 235 which could be considered as a standard sample. We have done the ratio not for the (n,f) cross sections only but also for other reactions like ,(n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), and (n,γ) relative to U - 235 reactions cross sections.Another evaluation is added to cross sections is the effect of the contamination of the daughter of U - 237 which the daughter is Np - 237 6.8day and their relative flux

دراسة تاثير المعاملة الحرارية على الخواص التركيبية والميكانيكية لبوليمر (بولي تيترافلورواثيلين) == Study the Effect of Heat Treatment on the Structural and Mechanical Properties for poly (tetrafluoroethylene

اسم المؤلف: رند باسم لطفي الكرخي
اسم المشرف: مي عبد الستار محمد نجيب
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: درس في هذا العمل نوعين من بولي تيترافلورواثيلين ( النقيين ولكن باختلاف الشركة المصنعة PTFE) (صيني _اماراتي ) بطريقه صب المحلول كافلام رقيقه واشرطة , بواسطه الخواص التركيبيه (حيود الاشعه السينيه ومسعريه المسح التفاضلي ) والخصائص الميكانيكية بدلاله درجات حراره مختلفة للدوره الحرارية . يبين كلا النوعين تغير في الشده المستطاره من المستوى القاعدي (100) عند تغير درجه حرارة الدورة الحرارية واظهر النوعين زيادة في التبلورية مع زياة درجة الحرارة .كذلك اختلاف في الانثالبي عند اختلاف درجات الحرارة حيث لوحظ زياة الانثالبي بزيادة درجة الحرارة واختلاف في الخصائص الميكانيكيه ( الاجهاد والانفعال عند نقطة الخضوع ونقطه الكسر ومعامل يونك) للبوليمر حيث اظهرت المعالجة الحرارية للبوليمر بدرجات حرارة مختلفة من اجل معرفة خصائصه ومقاومته الى الظروف البيئية ان الخواص الميكانيكية تزداد زيادة خطيا مع زيادة درجة الحرارة .لوحظ بان انتاج الشركه المصنعة الصينية افضل من ناحية النتائج لايجاد درجة التبلورية والخصائص الميكانيكيه عن انتاج الشركة المصنعة الاماراتية لنفس المادة البوليمرية | In this study two modifications of pure polytetrafluoroethylene (PTFE) [C2F4]n. China_UAE source prepared from solution cast as film and strip have been studied by structural (X - ray diffraction (XRD), Differential Scanning Calorimetry (DSC)) and mechanical properties .subjected to different temperature heating cycle. Both modifications show variation in the scattered X - ray intensity of the basal plane (100) as the temperature of heating cycle is changed and show increasing in crystallinity with the increase of temperature .Moreover, the Enthalpy of each kind is changed with difference of heat treatment where the enthalpy increase with the increase of temperature, and two modifications show different in mechanical properties for PTFE (young's modulus, stress at break, stress at yield, elongation at yield. And elongation at break) when the temperature is change ,The heat treatment of polymer to different temperatures in order to know its properties and resistance to environmental conditions results showed that the mechanical properties increase linearly with the increase of temperature.It seems that the product company of china is better than the product company of UAE in degree of crystallinity and mechanical properties for this polymer.

تصنيع ودراسة خصائص كاشف المفرق الهجين Cdo/ Si المشاب والمحضر بطريقة الرش الكيميائي الحراري == Fabrication &Characterization Heterojunction Photodetector of Cdo/ Si by Spray Pyrolysis Technique

اسم المؤلف: رفل صالح ساجت فياض
اسم المشرف: سعاد غفوري خليل العاني | رائد عبد الوهاب اسماعيل
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في هذا البحث تصنيع ودراسة خصائص كاشف المفرق الهجين نوع CdO/p - Si المشوب اذ حضرت اغشية اوكسيد الكادميوم(CdO) بطريقة الرش الكيميائي الحراري وبدرجة حرارة قاعدة ثابتة 380o C) ) وبالتراكيز المولارية M(0.1, 0.15, 0.2, 0.25) وشوبت بعنصري النحاس والالمنيوم بنسب (0.5%, 1%, 3%, 5%) على الزجاج وعلى شرائح من السليكون احادية التبلور (Single Crystal) من نوع p - type ذات اتجاهية بلورية (100) ومقاومية كهربائية (2 - 20 Ω.cm) ومن نوع n - type ذات اتجاهية بلورية(100) ومقاومية كهربائية (10 Ω.cm) وسمك يتراوح بين (400 - 600 nm) .ودرست الخواص التركيبية والطوبوغرافية والبصرية والكهربائية لغشاء CdO بتغير التركيز المولاري وبثبوت درجة حرارة القاعدة (Ts) لقد اوضحت نتائج حيود الاشعة السينية ان اغشية CdO ذات تركيب بلوري مكعب وان اعلى شدة كانت عند المستوي (111) , اوضحت النتائج البصرية ان قيم فجوة الطاقة تعتمد بشكل كبير على التركيز المولاري اذ وجدت ان قيم فجوة الطاقة لغشاء CdO النقي كانت تتراوح مابين 2.61 eV الى 2.34 eV ولوحظ ان فجوة الطاقة تبدا بالنقصان مع زيادة التشويب بالالمنيوم والنحاس مقارنة مع اغشية CdO النقية . حيث ان فجوة الطاقة عند التشويب بالنحاس كانت تتراوح مابين 2.5 eVالى 2.31 eV وتتراوح مابين 2.62 eV الى 2.48 eV عند التشويب بالالمنيوم.اوضحت نتائج قياس تيار - جهد للكاشف الضوئي ان مقدار عامل المثالية (Ideality factor) للكواشف المحضرة بمولارية وتراكيز اشابة مختلفة يزداد مع زيادة التركيز المولاري وان افضل قيمة له كانت بحدود 1.7 عند تركيز 0.5% وبالنسبة لشوائب النحاس وبحدود 1.8 بالنسبة لشوائب الالمنيوم بتركيز 0.5% .اظهرت نتائج قياسات الاستجابية الطيفية ان الكواشف المصنعة تعمل ضمن المنطقة الطيفية (400 - 850nm) ووجود قمتين لكاشف (CdO/Si) المشوب وغير المشوب الاولى تقع عند الطول الموجي (550 nm) والتي تعود الى غشاء CdO والثانية عند الطول الموجي (800 nm) والتي تعود الى السليكون. لقد اوضحت نتائج الاستجابية الطيفية للضوء الابيض ان الكواشف تمتلك خصائص خطية جيدة ولاوجود لمنطقة اشباع وان هذه الخصائص تحسنت بعد الاشابة.تم حساب الكشفية النوعية للكواشف المصنعة ووجد انها تتغير مع ظروف التحضير حيث ان اعلى قيمة لها كانت بحدود 6*1011(HZ1/2.W - 1.cm) عند الطول الموجي 500nm وبلغت 7*1011(HZ1/2.W - 1.cm) عند الطول الموجي 700nm للكاشف المصنع CdO : Al/Si المشوب بتركيز 5% . | We discussed in this research Manufacturing and study the detector hybrid retail properties type CdO/ P - Si the doping ,If film were prepared the Cadmium Oxide (CdO), by the way chemical spraying with tempratuer the constant base (380oC) And molar concentrations (0.1, 0.15,0.2,0.25)M. It was the doping for two element Copper and Aluminum with percentages (0.5%, 1%, 3%, 5%) on the glass and the slides of Silicon crystallization single from p - type With crystalline directional (100) and Electrical resistivity (2 - 20 Ω .cm) and from N - type With crystalline directional (100) and Electrical resistivity (10 Ω .cm) at thickness between (400 - 600 nm).We study the Characteristics Synthetic and Optical and Electrical the film CdO , by change molar concentrations with tempratuer the constant base (Ts) , I have explained the results X - ray diffraction that film CdO With a cubic crystalline structure And that the highest intensity was at the level of (111), The results showed of optical that value Energy gap the large dependent on molar concentrations , It was found the value Energy gap they were between (2.34 ev - 2.61 ev) and It was found simpel change in Energy gap when the doping by Copper they were between (2.31 ev - 2,51 ev) and Improving Energy gap when the doping by Alminum they were between (2.48 ev - 2.62 ev).The results measure Current - Potential the optical detector there Ideality factor the detector Prepared with tempratuer the constant base and different molar concentrations where the value increases with molar concentrations decreases, and the better value they were limited 1.7 when concentration 0.5% for Impurities Copper , And limited 1.8 for Impurities Alminum when concentration 0.5%.The result measure Responsive spectral the detector Manufacture the work with in Spectral region (400 - 850 nm) , And found two value the detector (CdO/ Si) the doping and undoping , The first located when wevelength (550 nm ), which return to the detector CdO , The second when wevelength (800 nm ), which return to the detector Silicon. It was found the value Specifc Detectvity the showed the better value they were the detector CdO : Al/ Si the doping concentration 5% it was about 6*1011(HZ1/2.W - 1.cm) at the Wavelength (500nm) and 7*1011(HZ1/2.W - 1.cm) at the Wavelength (700nm).I have explained the results Responsive spectral for white light that the detector has liner properties and this properties improving after at dopend.

دراسة التركيب المتهيج للنوى زوجية - زوجية ذات العدد الذري Z= 50, 48, 46 في المستوى المتهيج الاول == Study of Excited Structure for Even - Even Nuclides of Z = 50, 48, 46 in The First Excited State

اسم المؤلف: رسل سعد هادي
اسم المشرف: فاطمة عبد الامير جاسم
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: درست الخواص الكهرومغناطيسية للنظائر زوجية - زوجية للنوى 48Cd , 50Sn و46Pd الغنية بالنيوترونات من خلال قوى الانتقال لرباعي القطب الكهربائي |M(E2)|2 W.u ↓ واحتمالية الانتقال المختزل B(E2)W.u ↓ لانتقال اشعة كاما من المستوى المتهيج الاول الى المستوى الارضي. حيث تم حساب قوى الانتقال لرباعي القطب الكهربائي |M(E2)|2 W.u ↓ بالاستعانة بمعدل العمر للمستوى المتهيج الاول والشدة النسبية لاشعة كاما المنبعثة من ذلك المستوى, بينما قيم احتمالية الانتقال المختزل B(E2)W.u ↓ استخرجت من خلال عمر النصف للمستوى المتهيج الاول المصحح لمعامل التحول الداخلي.وللحصول على قيمة دقيقة لانتقال رباعي القطب الكهربائي ↓ E2, تم حساب ورسم القيم المتبناة لكل من |M(E2)|2 W.u ↓ وB(E2)W.u ↓ كدالة لعدد النيوترونات.في هذا البحث, تم تحويل القيم المتبناة لانتقال ↓E2 الى قيم احتمالية الانتقال المختزل B(E2) ↑ e2b2 والتي افادتنا في دراسة تركيب النوى من حيث الاختلاف في الشكل لان عامل التشوه β تم استخراجه من B(E2) ↑ e2b2, كما ان دراسة تاثير عدد النيوترونات على سلوك كل من B(E2) ↑ e2b2 وβ في المتسلسلات الايزوتونية لنوى 48Cd , 50Sn و46Pd يعطي معلومات جيدة حول التشوه في النوى.تركزت دراستنا على ثلاث انواع مختلفة من النوى, الاول بعدد ذري سحري50 , والثاني بعدد ذري شبه سحري 48, والثالث بعدد ذري بين القشرات المغلقة 46.في نهاية العمل الحالي تم عمل مقارنة جيدة للحسابات الحالية لقيم احتمالية الانتقال المختزل B(E2) ↑ e2b2 وعامل التشوه β مع معظم القيم العملية والنظرية الحديثة. | Electromagnetic properties for even - even nuclides in neutron - rich nuclei such 50Sn, 48Cd and 46Pd have been studied through the electric quadruple transition strength |M(E2)|2 W.u ↓ and the reduced transition probability B(E2)W.u ↓for γ0 - transition from first excited state to the ground state. The electric quadruple transition strength |M(E2)|2 W.u ↓ is calculated by using life - time for excited state with the intensity of γ0 - transition, while B(E2)W.u ↓ is extracted from half - life time to state corrected for internal conversion coefficient. To obtain precise value for the transition of E2↓, the adopted value for |M(E2)|2 W.u ↓ and B(E2)W.u ↓ was calculated and plotted as a function for neutron number. In present work, the adopted values for the transition of E2↓ are converted to B(E2)exp ↑ e2b2 which helped us to study the structure for nucleus, such as the variation in shape, because the deformation parameter β is extracted from B(E2) ↑ e2b2 and the study for behavior of each of B(E2) ↑ e2b2 and β versus neutron number in isotonic chains to 50Sn, 48Cd and 46Pd gives good information about the deformation in nuclei. Our study focused on the three different types of nuclei, the first with atomic magic number 50, the second with semi - magic atomic number 48 and the third nucleus with atomic number between closed shells 46. At the end of the present work, the good comparisons for the present calculation to the values of the B(E2) ↑ e2b2 and β with most recent values of experimental and theoretical was done.

دراسة طيفية لبعض الجزيئات ثلاثية الذرات باستخدام الطرق شبه التجريبية == Spectroscopic study of some tri atomic molecules using semi - empirical methodes

اسم المؤلف: ذكرى كمال طه
اسم المشرف: زياد عدنان صالح
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تــم في هــذا البحث دراسـة الخـواص الطيفيه كجهد التاين , الالفه الالكترونيه وقيم الطاقه للمدارات الجزيئيه المشغوله بالالكترونات (EHOMO)، والفارغة من الالكترونات (ELUMO) وفجوة الطاقة وكذلك حساب الكهروسالبيه والصلاده الكيميائيه والنعومه (قابلية التفاعل). لبعض الجزيئات ثــلاثيـة الـــذرات نظـــريا , اذ ان الجزء النظري تمت دراسته من خلال استخدام برنامج كاوسين (Gaussian09 لبعض الجزيئات الثلاثية الذرات كجزيئة ثاني اوكسيد الكربون , الماء , الاوزون , هيدروكسيد الصوديوم , كبريتيد الهيدروجين وكلوريد المغنسيوم وذلك باستخدام برامج الكم شبه التجريبية التي تستغرق مدة زمنية للحسابات (PM3,PM6) قياسا الى الطرائق المتقدمه التي استخدمت في البحث هي طريقتا دوال الكثافة وهارتري فوك ( HF, DFT ) وباستخدام عناصر مجاميع اساس مختلفه . تم رسم الشكل الهندسي الفراغي الاكثر استقرارا اعتمادا على المحاور الداخلية (˚r,θ˚,Φ)f ومنها تم حساب اطوال الاواصر والزوايا المحصورة بينها وعزمي القصور الذاتي وثنائي القطب , ثوابت الدوران , الكتله المختزله , طاقة نقطة الصفر والاستقطابيه وطاقات المستويات الاهتزازية المنشطرة نتيجه لتاثير رينر - تيلر , ومضاعف - - ℓ وحساب الانتقالات بين المستويات الاهتزازيه كذلك حساب الطاقه الكليه للجزيئات كافه. كذلك تم حساب ترددات انماط الاهتزاز الاساسية للجزيئه ورسمها ضمن منطقة الاشعة تحت الحمراء من الطيف الكهرومغناطيسي . اذ توصلت الحسابات النظرية ان قيم مضاعف - ℓ - تزداد كلما انتقلت الجزيئات الى مستويات طاقة اعلى واما بالنسبة لحسابات تاثير رينر - تيلر وجد انها تسبب في انشطار مستويات الطاقة الاهتزازية بالنسبة لكل الجزيئات في المستويين الاهتزازيين (1,0,1) و(2,2,0) لهما مقدار الطاقة نفسه . اضافة الى جانب وجود مستويات طاقة اخرى منشطرة متقاربة في قيم طاقاتها . | The study of spectral properties such as ionizations potential, electron affinity, electronegative, chemical hardness, softness and electrophonic index from inharmonic potential energy curve, spectroscopic dissociation also calculated EHOMO, ELUMO and energy gap Eg by theoretical parts .this studies by using Gaussian 09 (Gaussian 09 Revisioon - A - 02 - SMP) program of some tri - atomic molecules such as (CO2, H2O ,O3 NaOH ,H2S , MgCl2 molecules ) using semi empirical quantum programs , By using semi - empirical (PM3,PM6) , density functional theory and Hartree - Fock (DFT ,HF) methods this by using different basis sets So after drawing structure optimization of molecules depending on the internal coordinate f(r,θo,φo), then calculate length of bonds and angles between it , moment of inertia, dipole moment for Molecules by quantum mechanics methods which, then we calculated the orbital energy values (EHOMO ) and (ELUMO) ; and from these values ; ionization energy was calculated for molecule by take absolute values to (EHOMO )A computational calculation is a valuable tool for estimating the (geometry, total energy, electronic properties, dipole moment, polarizability, electrostatic surface potential, vibration frequencies) of molecular structures. The IR spectrum of molecule primitive vibration frequency located within infrared region from spectrum ranged is obtained Then - ℓ - type doubling we conclude that values increasing with it exited to high levels , from Renner - Teller effect cause splitting of energy of or vibrational state (1,0,1) , (2,2,0) have the same energy

تقدير الحاصل النيتروني لبعض نوى النظائر المتوسطة نتيجة لتفاعلات البروتون وجسيمات الفا والنيوترون لمدى طاقة (E=10 - 50) MeV

اسم المؤلف: رافت عبد الحسن مسلم
اسم المشرف: خالد هادي مهدي العبيدي
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: للنظائر اهمية كبيرة في كثير من المجالات مثل المجالات البحثية والصناعية والطبية ومجالات اخرى. فبعضها يحتاج لنظائر بنصف عمر طويل او بنصف عمر قصير وحاصل نيتروني عالي او قليل للحالتين, لذا تضمن هذا العمل دراسة الخصائص النووية لتسعة عناصر متوسطة الاعداد الكتلية هي (Ca ,Sc ,Ti ,Ni ,Cu ,Zn ,Zr ,Nb ,Mo ), ولكل عنصر تم اختيار عشرة نظائر لذا تضمنت الدراسة 90 نظير اعدادها الكتلية بين (41 الى 96) , شملت هذه الدراسة حساب طاقة التفاعل, طاقة العتبة, الكتلة المختزلة, طاقة فصل النيوترون وطاقة الربط النووية لتفاعلات ,Ca(α,n)Ti Ni(α,n)Zn , Zr(α,n)Mo , ,Sc(p,n)Ti ,Cu(p,n)Zn Nb(p,n)Mo , ,Ti(n,n)Ti Mo(n,n)Mo ,Zn(n,n)Zn لنظائر العناصر اعلاه , كما تم حساب قدرة الايقاف باستعمال برنامج (SRIM 2013) ومن ثم حساب الحاصل النيتروني من المعادلات النظرية اعتمادا على احدث ما نشر من المقاطع العرضية للعامين (2010 ,2012 ), كما تم في هذه الدراسة استخراج مجموعة من المعادلات شبه التجريبية الموحدة لحساب المحصول النيتروني لهذه العناصر بشكل مباشر لنوعين من التفاعلات (α,n) و(p,n) والتي كل منها يشتمل على عشرة نظائر ليكون المجموع 60 تفاعل, نتائج الحاصل النيوتروني المحسوبة من هذه المعادلات اعطت توافقا جيدا مع القيم النظرية التي حسبت من المعادلات النظرية. هذه المعادلات مع ثوابتها وضعت ضمن برنامج ماتلاب صمم لهذا الغرض وبالاعتماد على نوع العنصر ونوع التفاعل وطاقة الجسيم الساقط لايجاد الحاصل النيتروني لاي نظير عدده الكتلي بين (40 - 100 ) لمدى طاقة يتراوح بين (15 - 50) مليون الكترون فولط. يمكن تطوير البرنامج ليشمل عدد اكبر من العناصر بنظائرها ولمديات طاقة اوسع. | Isotopes have a great importance in many fields such as research, industrial, medical and other. Some of them need isotopes with long half life or short half - life with high neutron yield or less for them. So this work included the study of the nuclear properties for nine medium elements (Ca, Sc, Ti, Ni, Cu, Zn, Zr, Nb and Mo), from each element we choose 10 isotopes, so the total are 90, their masses numbers were between (41 to 96), this study included the calculations of the Q - value reaction, threshold energy, reduced mass, separation energy of neutron and the binding energy for nuclear reactions , Ca(α,n)Ti , Ni(α,n)Zn , Zr(α,n)Mo , Sc(p,n)Ti , Cu(p,n)Zn , Nb(p,n)Mo , Ti(n,n)Ti Mo(n,n)Mo and Zn(n,n)Zn for the isotopes of the above elements, also we calculated the stopping power by using a (SRIM 2013), then the neutron yield was calculated from theoretical equations depending on most recent cross - sections (2010.2012), as well as this study focused on the extraction of a set of uniform empirical equations to calculate the neutron yield in directly for (α, n) and (p, n) reactions for these elements, and each of them includes 10 isotopes so the total reactions are 60. The result of neutron yield for these equations was in a good agreement with theoretical value which is calculated from the theoretical equations. These set equations with their coefficients were put within the MATLAB program, it was designed for this purpose and by depending on the element type, the type of reaction and incident particle energy to find the neutron yield for any isotope, their mass number is between (40 - 100) for energy range within the (15 - 50) MeV. This program can be developed to include a greater number of elements with their isotopes and for larger energy range.

دراسة تاثيرات خسارة الانحناءات لليف البصري في منظومة الاتصالات البصرية == Study Effects of Optical Fiber Bending Loss in Optical Communication System

اسم المؤلف: دعاء هشام محمد
اسم المشرف: سمر يونس الدباغ
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا البحث , تم دراسة تاثير الانحناء على انتقال الاشارة الضوئية خلال الالياف البصرية. هذا العمل يتضمن قياسات الخسارة في القدرة خلال الليف البصري بوجود الانحناءات عند عدد لفات مختلفة من (1 - 10) لفة وعند اقطار انحناء مختلفة (12.5 , 10.5 , 8 , 6 , 4 , 3 , 2 , 1) cm. نوعين من الالياف البصرية تم استخدامها , الليف المتعدد الانماط (MMF ) باطوال مختلفة (1 , 20 , 40 , 100 , 120 , 140 ) m وليف احادي النمط بطول (4.5 m) .واستخدم نوعين من الليزرات ليزر دايود الاحمر (λ=650 nm) وليزر دايود اخضر (λ=532 nm).القدرة الضوئية تم قياسها باستخدام جهاز قياس القدرة. تشير النتائج ان كلما قل قطر الانحناء وزادت عدد اللفات فان الخسارة في القدرة الضوئية تزداد. حيث ان القدرة الضوئية لليزر الاخضر عند الطول الموجي (λ=532 nm) تقل من (48.083*10 - 4) mW الى (41.114*10 - 4) mW عند اللفة الاولى لليف متعدد الانماط بطول (40m) عندما تم حني الليف من cm12.5 الىcm 1. اما لليف الاحادي النمط, فان القدرة الخارجة لليزر الاخضر عند طول موجي (λ=532 nm) تقل من (13.608) mW الى (13.32) mW عند اللفة الاولى من طول (4.5) m لليف احادي النمط عندما تم حني الليف من 12.5 cm الى 3 cm . اظهرت النتائج ايضا ان تاثير الانحناء في القدرة الخارجة في حالة الليف المتعدد الانماط اكبر مقارنة بالليف احادي النمط. وكذلك النتائج لهذا البحث تتضمن تصميم وتنفيذ منظومة اتصال الالياف البصرية لفحص تاثير الانحناء على الاشارات المنتقلة خلال الالياف البصرية متعددة الانماط حيث لف من (1 - 10) لفة وعند اقطار انحناء مختلفة ( 1,2,3,4 ) cm . تم تضمين الاشارات باستخدام ليزر nm 532 .الاشارة تم ارسالها خلال ليف متعدد الانماط باطوال مختلفة وهذه الاشارة تم الكشف عنها باستخدام كاشف السليكون الضوئي (AEPX 65) . وجد ان الانحناءات تؤدي الى تغييرات واضحة في سعة ( جهد ) الاشارة الخارجه ؛ حيث يقل الجهد من 0.64volt الى 0.52 volt عند زيادة عدد اللفات من) 1 - (10 لفة في ليف بطول 40m وقطر الانحناء (1) cm.ويقل الجهد الى حد 0.2 volt في ليف بطول 140m وقطر الانحناء (1) cm.واخيرا الاشارات المنتقلة فيمنظومة الياف بصرية باستخدام كاميرا (CCD) واستخدام حاسبة شخصية معUSB TV STICK لرؤية تاثير الانحناء على انتقال الاشارات خلال الالياف البصرية. حيث ان الاشارة الخارجة ستقل من 0.68 volt الى 0.6 volt عندما عدد اللفات تزداد من (1 - 5) لفة في ليف بطول (1) m .اجرى احتساب كل من نسبة الاشارة الى الضوضاء ومعدل الخطا في نقل البيانات في للاشارات المنتقلة في منظومة الاتصالات عند اقصى طول لليف البصري 140m وعند اللفة 10 فكانت 115.147dB و3.68x10 - 27 على التوالي . بينما نسبة الاشارة الى الضوضاءSNR ومعدل الخطاBER في نقل البيانات في الاشارات المنتقلة باستخدام كاميرا CCD عند طول الليف البصري 1m وعند اللفة 10 فكانت 100.49dB و5.98x1o - 24 على التوالي .. اظهرت النتائج ايضا ان نسبة الاشارة الى الضوضاء تقل ومعدل الخطا في نقل البيانات يزداد بزيادة عدد اللفات في كلا المنظومتين | In this work, bending loss effects of optical fiber on the transmitted signal were studied.This work includes measurements of the power loss through optical fiber with the presence of bends at different wrapping turns (1 - 10) turns and at various bending diameters (12.5, 10.5, 8, 6, 4, 3, 2, and 1) cm. Two types of optical fibers were used, multimode optical fiber (MMF) of different lengths (1, 20, 40, 100, 120, 140) m and a single mode optical fiber (SMF) of length (4.5 m). Two optical sources were used, Red laser diode (λ=650 nm) and green laser diode (λ=532 nm). The output power was measured using an optical power meter. Results indicated that as the bending diameter decreased and the number of wrapping turns increased, the power loss increased. The output power of green laser diode at (λ=532 nm) decreased from (48.083*10 - 4) mW to (41.114*10 - 4) mW at the first turn of 40m MM fiber length when bent from (12.5 to 1) cm. For SMF, the output power of green laser diode at (λ=532 nm) decreased from (13.608) mW to (13.32) mW at first turn of (4.5) m SM fiber length when bent from (12.5 to 3) cm. The higher alteration output power in the case of multimode fiber has been deduced as compared with that of the single mode fiber. Also the results of the project involves a design and an implementation optical fiber communication system to investigate the effect of bending on the transmitted signals through multimode optical fiber wrapped (1 - 10) turns and at different diameters (1, 2, 3, 4) cm . Signals were modulated using 532nm laser diode then sent through multimode fiber of different lengths and detected by silicon photo detector (AEPX 65). The bending induces changes in the amplitude (voltage) of the output signal, the output voltage decreased from 0.64 volt to 0.52 volt when the no. of turns increased from 1 - 10 turns for 40 m optical fiber at a bending diameter of (1cm) and decreased to 0.2 volt for 140m multimode fiber at a bending diameter of (1cm).Finally, a transmitted signal in optical communication system has been built using CCD camera and Pc with USB TV STICK for monitory the effect of bending on signals that transmitted through optical fibers. The output transmitted signals decreased from 0.68 volt to 0.6 volt when the no. of turns increased from 1 - 5 turns for 1 m optical fiber. The calculations of signal to noise ratio (SNR) and Bit Error Rate (BER) for transmitted signals in optical communication system at maximum fiber length of 140m and 10turns are equal to 115.147dB and 3.68x10 - 27 respectively. While for transmitted signal form CCD camera at fiber length 1m and of 10 turns are equal to 100.49dB and 5.98x1o - 24 respectively.Results show that SNR decreased and BER increased as no. of wrapping turns increased for both systems.

تحضير ودراسة سلوكيات الرص لمتراكبات (الومينا - المنيوم) == Preparation & Studying the Compaction Behaviors of the (Alumina - Aluminum) Composite

اسم المؤلف: حنان جميل مصطفى
اسم المشرف: عبد الحميد رحيم مهدي الصراف
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم تحضير المتراكب السيرميتي (سيراميك - معدن) من مادة الالومينا (Al2O3 - γ( كمادة اساس، ومن معدن الالمنيوم (Al) كمادة تدعيم، لتراكيز مختلفة من الالمنيوم (0 - 50)%، ونسبة زيادة التدعيم 10)%).تمت عملية التشكيل باستعمال الضغط باتجاه واحد، وانجزت عملية التلبيد في جو مفرغ من الهواء. درست سلوكيات الرص بحالة التلبيد الصلبة عند درجات حرارة التلبيد (400، 450، 550) م° ، وازمان التلبيد (2، 4، 6) ساعات، وعند ضغوط تشكيل (50، 100، 150) بار، تم الحصول على افضل الخواص الفيزيائية عند (550م°، 2ساعات، 150ساعة). تمت دراسة حالة تلبيد الطور السائل كدالة لتغير نسبة الالمنيوم في المتراكب عند (800م°، 2ساعة، 150بار)، بناء على ما تم التوصل اليه من خواص فيزيائية جيدة عند حالة التلبيد بالطور السائل، اختيرت هذه المواصفات لدراسة تاثير تغير الضغط عند (50، 100، 150) بار على الخواص الفيزيائية للمتراكبات السيرميتية المحضرة. اظهرت السلوكية عند المنطقة التي تحتوي تركيز الالمنيوم (40 - 50)% افضل الخصائص الفيزيائية، تبعا لذلك، درست اغلب القياسات على التركيز صاحب نسبة 50% من مادة الالمنيوم. المفهوم الاساسي الذي تضمنته هذه الدراسة هو التلاصق الفيزيائي بين مكونات المتراكب السيرميتي المحضر، والذي كان واضح من فحص انحراف الاشعة السينية. كذلك من الفحص المجهري (SEM) نلاحظ ان المتراكب النهائي (السيرميتي) المحضر اشبه الى ما يكون جزر موصلة (مادة الالمنيوم) مفصولة بمناطق عازلة (مادة الالومينا) وهذا ناتج بفعل التلاصق الفيزيائي. لوحظ ان زيادة نسبة الالمنيوم للمتراكبات المحضرة يلعب دورا مهما في الخواص الفيزيائية والكهربائية والتي تم مناقشتها بالتفصيل، وكذلك حسن من قيمة الصلادة للمتراكبات المحضرة، حيث ان التوزيع العشوائي لدقائق الالمنيوم ضمن مادة الالومينا، كون اقرب الى ما يكون الى شبكة داخلية معدنية زادت من متانة المتراكب المحضر من خلال ملء المسامات الموجودة غالبا بسبب مادة الالومينا الهشة. من خلال هذه الدراسة توصلنا الى ان المتراكب المحضر له نسبة مسامية عالية والتي يمكن توظيفها في صناعة فلترات الوقود. كما يمكن توظيف الخواص العزلية المحسنة التي توصلنا اليها في صناعة المتسعات السيرميتية (cermet capacitors )، كذلك من خواص مقاومة البلى التي توصلنا اليها، ممكن توظيفها في تصنيع ادوات القطع والبرد بعد اجراء التحسينات اللازمة. | A cermet (ceramic - metal) composite have been prepared from alumina ceramic (γ - Al2O3) as a matrix and from aluminum metal (Al) as reinforcement, prepared for different concentrations of aluminum (0 - 50)%, the reinforcing increment is (10%).The forming process was done by single action pressing, and the sintering process was done in vacuum atmosphere.The compaction behaviors of prepared cermet bodies were studied in solid state sintering, at sintering temperatures (400, 450, 550) °C, sintering times (2, 4, 6) hrs. and forming pressures (50, 100, 150) bar, the best physical properties were gained at (550 °C, 2hrs., 150bar).Liquid phase sintering process was studied as a function of Al percent in the composite at (800 °C, 2 hrs., 150 bar). According to the interesting physical properties we gained from liquid phase sintering process, these parameters were chosen to study the effect of the forming pressure ((50, 100, 150) bar) on the physical properties of the prepared cermet bodies. The behavior at the region that have aluminum concentration (40 - 50)% showed the best physical properties, according to this, most of the measurements were studied on the concentration of 50% of aluminum material. The basic concept of this study is the physical adhesion between the material particles of the prepared cermet bodies, which was obvious from the XRD tests. Also from the SEM micrograph we have notice the final structure of the prepared cermet, which is more like conducting islands (aluminum) separated by isolated areas (alumina), which is a sequent of the physical adhesion action.Increasing of aluminum content in the composite materials prepared may play an important role in physical and electrical properties has been discussed in detail, also enhanced the hardness of the samples, where the random distribution of aluminum particles through the alumina material, makes more like internal web of metal, that helps to increase toughness of samples by filling the porosities existed because of the brittle alumina.From this study we noticed, we have relative high porosity that could be employed in fuel filters. Also we have fine dielectric properties that could inter the application of cermet capacitors. Also, we have reasonable wear result that can be employed in grinding and cutting tools after improvements have been done.

التوصيلية الضوئية للمفرق الهجين a - GaAs : Zn/c - Si == Photoconductivity of a - GaAs : Zn/c - Si Heterojunction

اسم المؤلف: ايمان كاظم جبر
اسم المشرف: حسين خزعل رشيد | رامز احمد الانصاري
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: حضرت اغشيه زرنيخات الكاليوم المشوب بعنصر الزنك بنسبة 1% GaAs : Zn باسماك مختلفة mµ(1.0 ,0.75 ,0.5 ,0.25) بتقنية التبخير الوميضي على ارضيات زجاجية ورقائق من c - Si بدرجة حرارة الغرفـة وتحت ضغط فراغي 10 - 5 mbar وبمعدل ترسيب مقارب الى 0.92Å/s لدنت هذه الاغشية بدرجات حرارة تلدين مختلفة K(373, 473 ) لمدة ساعة واحدة ولدراسة الخواص التركيبية تم تلدين اغشية زرنيخ الكاليوم المشوبة بالزنك والمرسبة على الزجاج بسمك mµ0.5 الى درجة حرارة and773)K473,373).تم دراسة الخواص التركيبية للاغشية المحضرة على ارضيات زجاجية بواسطة حيود الاشعة السينية XRD وقد اظهرت نتائج حيود الاشعة السينية ان الاغشية الملدنة بدرجة حرارة اقل من 473K ذات تركيب عشوائي وبزيادة درجة حرارة التلدين اصبح التركيب متعدد التبلور F.c.c عند درجة حرارة 473K وبالاتجاه المفضل (111) ,اما دراسة خصائص السطح المورفولوجية بواسطة مجهر القوة الذري (AFM) , فقد وجد ان خشونة السطح تقل مع زيادة درجة الحرارة التلدين وتزداد مع زيادة السمك اما الحجم الحبيبي فوجد انه يزداد مع زيادة درجة حرارة التلدين والسمك.درست الخصائص الكهربائيــة للاغشية المحضرة على ارضيات زجاجية بتغير السمك ودرجة حرارة التلدين حيث ازدادت التوصيلية الكهربائية المستمرة (2.05 - 59.3) 10 - 3 (.cm) - 1 لجميع الاغشية المرسبة بزيادة السمك وبدرجة حرارة الغرفة قلت (15.1 - 2.39) 10 - 3 (.cm) - 1 بزيادة درجة حرارة التلدين من (RT - 473)K للاغشية ذات سمك 0.5mm، قلت طاقات التنشيط الكهربائية (Ea1& Ea2)بزيادة سمك الغشاء وزادت بزيادة درجة حرارة التلدين (RT - 473)K. اظهرت قياسات التوصيلية المتناوبة لاغشية الـ GaAs : Zn باسماك مختلفة وبدرجات حرارة تلدين مختلفة بانها تنطبق مع نموذج تنطط الحاجز المرتبط(CBH) . وبينت قياسات هول الى ان جميع الاغشية هي من النوع (p - type)، وتركيز الحاملات يزداد - 89.29 )×1016 cm - 3 (0.08 بزيادة سمك الغشاء وتقل (1.95 - 0.21)×1016 cm - 3 بزيادة درجة حرارة التلدين (RT - 473)K. وكذلك لاحظنزايادة قيم التحركية بزيادة درجة حرارة التلدين ,بينما تقل مع زيادة السمك.اظهرت القياسات البصرية لاغشية a - GaAs : Zn بان الانتقالات البصرية كانت مباشرة مسموحة ذات فجوة طاقة تزداد مع زيادة درجة حرارة التلدين بينما تقل مع زيادة السمك.قيست سعة الانحياز العكسي للمفرق الهجين a - GaAs : Zn/c - Si كدالة لفولتية الانحياز وبتردد 100KHz وقد دلت هذه النتائج على ان المفرق من النوع الحاد، لوحظ تناقص السعة بزيادة جهد الانحياز العكسي، وايضا لوحظ ان السعة تقل بزيادة سمك الغشاء وتتناقص مع زيادة درجة حرارة التلدينF/cm2(2.24 - 1.54) للسمك 0.5µm. وجد ايضا ان جهد البناء الداخلي للمفرق يتناقص 0.15)Volt (0.40 - عند زيادة السمك .درست خواص تيار - فولتية للمفرق الهجين a - GaAs : Zn/c - Si تحت ظروف الظلام وقد وجد بانها تتفق مع نموذج اعادة الاتحاد - الاختراق ، كذلك اظهرت النتائج ان كثافة التيارتقل بزيادة درجة حرارة التلدين وسمك الغشاء وذلك بسبب زيادة العيوب عند سطح المفرق. وعامل المثالية يزداد بزيادة سمك الغشاءمن(2.4 - 2.7). ومن خلال قياسات تيار - فولتية تحت ظروف الاضاءة وجدنا ان كثافة التيار الضوئي يزداد مع زيادة درجة حرارة التلدين ويقل مع زيادة السمك.درست خواص كثافة تيار الدائرة القصيرة وفولتية الدائرة المفتوحة حيث وجدنا ان ,Jsc Voc, تزداد قيمهم بزيادة درجة حرارة التلدين | GaAs weight doping percentage by 1% Zinc (GaAs : Zn) films have been deposited by flash evaporation technique on glass and c - Si wafer substrates at room temperature under vacuum of 10 - 5 mbar with rate of deposition near to 9.25Å/sec. These films of different thicknesses (0.25, 0.5, 0.75, 1.0) µm have been annealed at different temperatures Ta (373, 473)K for to study the properties of structure of a - GaAs : Zn films that deposited on glass substrate with thickness 0.5 µm annealed at (373, 473 and 773)K. The structural characteristic of the films prepared on glass substrates have been studied by using X - ray diffraction, which shows that the films have amorphous structure for sample annealed at Ta> 473K. The samples annealed at 473 K showed a polycrystalline with Face - Center cubic system preferred orientation along (111).The surface morphological characteristics were studied by atomic force microscope (AFM) which show that decreased in surface roughness with increasing annealing temperature and increased with thickness increases. The grain size increases with increasing annealing temperature and thickness.Electrical properties of the films prepared on glass substrates were studied with different thicknesses and annealing temperatures. The D.c conductivity for all deposited films increases from (2.05 to 59.3) 10 - 3 (.cm) - 1 with thickness increases at room temperature and decreases from(15.1 to 2.39) 10 - 3 (.cm) - 1 with increase of annealing temperature from RT to 473K for films of 0.5m. The electrical activation energies Ea1and Ea2 decrease with thickness increases and increasing with increasing of annealing temperature from room temperature to 473K. A.C conductivity measurements for GaAs : Zn films with different thickness and annealing temperatures were consistent with correlated barrier hopping model (CBH).Hall measurements showed that all the films are p - type with carrier's concentration increasing from( 0.08 to 89.29)×1016 (cm) - 3 with film thicknes increase and decreasing from (1.95 to 0.21)×1016 (cm) - 3 with increasing of annealing temperature from room temperature to 473K. Also we observe that the mobility values decreases with thickness increases and increasing with increasing of annealing temperature. The optical measurement showed that the nature of the optical transition has been direct allowed with band gap energies increases with increasing of annealing temperature while decreases with increases of film thickness.The reverse bias capacitance for a - GaAs : Zn/c - Si heterojunction was measured as a function of bias voltage at frequency 100 KHz, and it is indicated that these heterojunction are abrupt. The capacitance decreases with increasing the reverse bias voltage, also decreasing with increasing annealing temperatures from (2.24 to1.54) ×10 - 7 F/cm2 for film thickness 0.5 µm and with increasing film thickness.The value of built - in potential for heterojunction decreases from (0.4 to 0.15) Volt with increasing of thickness.while increases with increasing temperature from (0.3 - 0.4) Volt for film thickness 0.5 µm.The J - V characteristics of the a - GaAs : Zn/c - Si heterojunction under dark have been studied under dark condtion. This may be in agreement with tunneling recombination model. Furthermore, the product shows that the current density decreases with the increasing of annealing temperature and film thickness for the increases in the defects at heterojunction interface. The ideality factor increases with the increasing film thicknes from (2.4 to 2.7). Under illumination, the photocurrent density increases with increases of annealing temperatures and it decreases with the increases of thickness. The short - circuit current density and open - circuit voltage have been studied where the Jsc ,Voc , increase with the increasing of annealing temperatures

دراسة تاثير تركيزانابيب الكاربون النانوية متعددة الطبقات على الخصائص الفيزيائية لمتراكبات الايبوكسي == Study The Effect of Multi Walled Carbon Nanotubes (MWCNTs) Concentration on Physical properties of Epoxy composites

اسم المؤلف: الفت احمد محمود
اسم المشرف: خالد رشاد الراوي | عدوية جمعة حيدر
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Multi wall carbon nanotubes (MWCNTs) have excellent mechanical, electrical, and thermal properties. When MWCNTs incorporated in to polymer, that’s leads to better improvement in mechanical, electrical, and thermal properties result at low MWCNTs content. Due to the change in the electrical and mechanical properties MWCNTs / Epoxy composites have attracted significant research interest specially due to their potential for application in active control of strain sensing in composites structure or as strain sensor .Different type of MWCNTs, long and short (L - MWCNTs & S - MWCNTs) were used as reinforcement in epoxy resin with volume fraction ( 0.1,0.2, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0 ,4.5, & 5%) respectively were used to prepare epoxy composites in order to examine and study some of their mechanical properties ( tensile strength, Young's modulus, flexural strength, fracture toughness, flexural modulus, Impact strength, and microhardness ), conductivity properties (AC conductivity, thermal conductivity), and morphology properties (SEM,FTIR). Direct mixing processes use to prepared (Epoxy / MWCNTs) composites, its involved use ultrasonic and magnetic stirrer bar mixing process to disperse the MWCNTs into the epoxy resin system. The results shown an improves in the mechanical, thermal, and electrical properties with increase volume fraction (0.1 to 2%), and then decreased with further increasing the MWCNTs content but stay higher than of pure epoxy. At (1.5%) we observed enhancement in tensile strength (28.19%, 15.74%) and Young's modulus (35.71%, 30.95%) for L - MWCNTs and S - MWCNTs respectively, and the higher enhancement in flexural modulus and flexural strength due to 2% vol. fraction of L - MWCNTs reached to (71.43 %, 102.26 %). The high impact strength and microhardness values result at (1. 5%L - MWCNTs) reached to (823.996%), and (41,102%) respectively.Better improvement in thermal conductivity and AC conductivity result at 2% volume fraction for both MWCNTs types compare with pure epoxy. The high thermal conductivity values due to L - MWCNT reached to (369.31%) or three times from the thermal conductivity of pure epoxy, compare with the value of enhancement for S - MWCNTs (183.39 %).Investigations of electrical properties of MWNT/polymer show a significant increase of electrical conductivity with the increase of the MWCNTs content. The AC. electrical conductivity of the sample with 2 % vol. fraction L - MWCNTs reached to four orders of magnitude higher than that of the pure polymer at a frequency range of (5E 4 to 5 E6) Hz, its present(9.66E - 7 to 5.78E - 5 Ω/cm) compare with the AC. electricalconductivity for S - MWCNTs ( 6.57 E - 11 to 2.24E - 5 Ω/cm) at same volume fraction and frequency range and with the electrical conductivity of pure epoxy (4.5E - 12 to 6.2E - 9 Ω /cm).Scanning Electron Microscope images illustrate the morphology of tensile fractured surface of EP/MWCNTs composites, although the morphologies of tensile fractured surface show ductile fracture with dispersed stresses in more than one crack propagation. Increased roughness and ductile behavior shown with increased volume fraction of MWCNTs. Above 2% vol. fraction of MWCNTs we shown increase the agglomeration that’s lead to decrease in properties of epoxy composites.

المتحسسات الطبيعية للخلايا الشمسية ذات الصبغات المتحسسة على قواعد اوكسيد الخارصين == Natural Sensitizer for Dye - Sensitized Solar Cells Based on Zinc Oxide

اسم المؤلف: اوراس طارق شاكر
اسم المشرف: صلاح عبد الله حسون | رعد محمد صالح الحداد
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: This thesis focused on the study of dye - sensitized solar cells (DSSCs) based on ZnO nanoparticle as a semiconducting layer with two natural dyes.The present study began by synthesizing ZnO nanoparticles by two methods. The first method ZnO nanoparticles prepared by sol - gel method with (0.1, 0.2, 0.3 M) zinc acetate and then thin films of zinc oxide prepared by using spin coating technique with thickness equal to (109 nm), while the second method technique of ZnO nanoparticles prepared by sol gel method (0.2 M) from zinc acetate was selected as the optimum concentration to make thin film of zinc oxide (In the form of a paste) by using doctor - blade technique with thickness equal to (111nm).The effective mass model for spherical particles (Brus equation) for ZnO nanoparticles were (1.3147, 1.4056, 1.6379 nm) for three concentration.The characteristic of the prepared films on glass substrates have been examined by X - ray diffraction analysis (XRD), UV - Vis spectroscopy, photoluminescence spectrum (PL), scanning electron microscopy (SEM), Atomic Force Microscope (AFM) and Thermo Graviometric Analysis (TGA).In both methods , ZnO films were prepared on transparent conducting oxide (ITO) coated glass then addition of chlorophyll as sensitized dye which extracted from spinach leaves and anthocayanin pigment from pomegrenate juice and they were used as the working electrode (anode) of dye - sensitized solar cell (DSSCs).The absorption spectra of all dyes were performed by UV - Visible spectroscopy which showed that the dye absorbed light in the visible region from (400 nm) for chlorophyll pigment and (510 nm) for anthocyanenpigment.The (I - V) characteristic curves of the fabricated tow cells were measured and studied at constant light intensity. All photovoltaic parameters of the cells were presented. The results revealed that the extract of Pomegranate by using spin coating lead to the highest efficiency (15%).

تشخيص ورم الكبد من الصور المقطعية باستخدام معالجة الصور الرقمية == Diagnosis of Liver Tumor from Computed Tomography Images using Digital Image Processing

اسم المؤلف: انتظار مالك هادي
اسم المشرف: علياء حسين علي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: معالجة الصور
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: This work aims to detect and diagnoses liver tumors from Computed Tomography images using digital image processing, this is a modern technique which depends on using computer in addition to textural analysis to obtain an accurate liver diagnosis, despite the method's difficulty that came from liver's position in the abdomen among the other organs. This method will enable the surgeon to detect the tumor and then easing treatment also it helps physicians and radiologists to identify the affected parts of the liver in order to protect the normal parts as much as possible from exposure to radiation. This work describes a new 2D liver segmentation method for purpose of segmented as a treatment for liver tumors. Liver segmentation is not only the key process for volume computation but also fundamental for further processing to get more anatomy information for individual patient. Due to the low contrast, blurred edges, large variability in shape and complex context with clutter features surrounding the liver that characterize the CT liver images. The method has been implemented in MATLAB and a Graphical User Interface was created. These imaging studies have contained a total of 22 CT images, including five Haemangioma, five Cyst, five Cirrhosis, five carcinomas and two healthy livers. Calculating the area of the abnormal part (tumor), an algorithm has been created to colored images depending on the boundary. The images have been transformed from RGB color space to HSV color space to identifying different colors in fabric by analyzing the HSV color space. This helps to separate abnormal part in to K - clusters. The method is very effective and gives the best result for classification process. Since it depend on the color of the texture and on the distance between the classes. The 2D segmentation process which is based on the hybrid method which is the combination of modified k - Mean (which depend on the distance and color), and the statistical structure which is the first order statistical feature. The statistical features are : Mean, Variance, Standard deviation, Skewness, Kurtosis, Energy and Entropy, and the geometrical feature which are area and the irregularity. These features together helps to diagnose the liver tumor and to classify these tumor

حساب الحاصل النيوتروني للتفاعلات (?,n) و(p,n) لبعض النوى المتوسطة لمدى طاقي (50 - 100 MeV) باعتماد المعادلات شبه التجريبية == Neutron Yield Calculations for (?,n) and (p,n) reactions for Some Intermediate Nuclides in the Energy rang (50 - 100MeV)by using Semi - empirical formula

اسم المؤلف: اسيل عادل يوسف
اسم المشرف: خالد هادي مهدي العبيدي
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: ان اغلب المقاطع العرضية لاغلب النظائر المشعة تكون مفقودة عند طاقات معينه في المختبرات العالمية ، لذا تم استخراج مجموعة صيغ رياضية شبه تجريبية موحدة لحساب الحاصل النيوتروني بالاعتماد على العدد الكتلي للنظير وطاقة القذيفة ، اما طاقة منفردة او مدى من الطاقات . تم العمل على جمع بيانات المقاطع العرضية مقابل الطاقات للمدى (50 - 100 MeV)من المختبرات العالمية (Koning , A . J . ; TENDL - 2010 - 2012) لنوعين من التفاعل (α,n) و(p,n) مع نظائر اربعة عناصر( 33As, Fe26 , Mn25 ، (32Geلكل عنصر عشرة نظائر فيصبح مجموع التفاعلات اربعين تفاعل كما تم حساب قدرة الايقاف للبروتون ولجسيمة الفا بوساطة برنامج (SRIM - program - 2013)، ومن ثم حساب الحاصل النيتروني باستخدام برنامج (الماتلاب2008a)، وهو مصمم لهذا الغرض ، تم حساب طاقة اللاتناظر لكل نظير ومن ثم استخراج صيغ رياضية من خلال افضل عملية ملائمة (fitting) بين طاقة اللاتناظر والحاصل النيوتروني للتفاعل عند الطاقات (50,60,70,80,90,100 MeV) لاهداف نوى متوسطة مختلفة . وضعت المعلمات الاولية المستخرجة من الصيغ الرياضية في جداول ، ورسمت العلاقة بين كل مجموعة معلمات والطاقة المقابلة لها لغرض استخراج معادلات موحدة ، والتي من خلالها تم ادخال متغير الطاقة في المعادلة الاساسية المستخرجة ، وبعد رسم العلاقات وجدنا المقاطع العرضية للتفاعل (α,n) اصغر من التفاعل (p,n) ، وان الحاصل النيوتروني يزداد مع زيادة طاقة الجسيم الساقط وتناقص العدد الكتلي ، وان النتائج المحصلة من الصيغ الرياضية الجديدة المعتمدة على القيم العملية في تطابق جيد مع النتائج النظرية المنشورة . | cross sections for many reactions for most of isotopes with different energies in international laboratories were missed so we get a mathematical semi - empirical equations for calculating the neutron yield depending on mass number of target and projectile energy (single enrgy or range of energy ) . Data of cross sections were collected from international libraries (TENDL,Kong) from 2010 to 2012 for tow types of reaction (α,n) and (p,n) for energies (50 - 100MeV) with ten isotopes of (33As , 26Fe , 25Mn , 32Ge) elements , that is mean the total number of reaction will [40] reaction , then stopping power for proton and alpha particle were uese calculated using SRIM program 2013 then neutron yield was calculation using Matlab program 2008a designed for this purpose so as asymmetry energy for each isotope then by fitting relation of asymmetry energy with neutron yield for, the reaction at energies (50,60,70,80,90,100) MeV with intermediate nuclide we get . The parameters were tables and from their relations with energy we get final set of semi - empirical equations, then it was drown , we from this fingers we concluded that the cross sections for (α,n) reactions were less than (p,n) reactions and the neutron yield in cress with increasing the projectile energies and with decreasing of atomic number all the results that got from this new semi - empirical equations that we got from experiment data was in good agreements with published the data .

تحضير جسيمات ثنائي اوكسيد التيتانيوم النانوية بطريقة الصول - جل باستخدام الازالة بالليزر وتطبيقاته كاصباغ نانوية == Synthesis of TiO2 Nanoparticles by Sol - Gel Method using Laser Ablation for Nano Paint Application

اسم المؤلف: زينب ناصر جميل
اسم المشرف: سمر يونس طه | عدوية جمعة حيدر
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Titanium dioxide (TiO2) nanoparticles (NPs) have been widely investigated to employ in the paint fields due to its importance as pigments. Therefore, TiO2 particles are perfect candidates in the paint industry. In addition to use nanoparticles for enhancing the local coating properties in our country.In this work, the sol - gel technique employed to prepare TiO2 nanoparticles with two procedures and two precursors (TIP and TiCl4), the obtained two phases of TiO2 (anatase and rutile), nanopaticles colloid irradiated by pulse laser ablation (PLA) for minimizing particle size. It has been fabricated a laboratory paint (TiO2/SiO2 hybrid sol - gel). Nanoparticles characterization has been carried out by different devices to study properties such as morphology, structure and optical properties, Transmission Electron Microscope (TEM) and Dynamic Light Scattering (DLS) demonstrated the size and shape of nanoparticles in the range of (3 - 40) nm spherical for anatase, while the rutile results were around (50 - 70) nm with ellipsoidal shape. Scanning Electron Microscopy (SEM), which was confirmed the results of TEM and DLS. Zeta - potential (ζ) results which were indicated the colloid stability, surface charge for the first procedure and the second procedure, anatse and rutile (+39.02, +25.68,+41.31 and+34.33) mV, respectively. The structural characteristics of TiO2 nano - powder investigated by X - ray Diffraction(XRD) to define the phases of TiO2, anatase at 500˚C , rutile at 900˚C, and Raman Spectroscopy to distinguish between crystalline phases, Raman shift resulted for anatase about (142.1,411.1,547.4 and 669.6) cm - 1, rutile (190,272,452 and 616) cm - 1. The optical properties measured by UV - Vis. Spectrophotometer to compute the energy band gap for both phases at (3.8 eV) for anatase and (3.4 eV) for rutile.The nanoparticles were mixed with coating solution (i.e. hybrid sol - gel and organosilicate nanoparticles (OSNP) in different concentrations (1%wt and 10%wt) for both anatase and rutile. Films were prepared by spin coating method which has been studied by the Energy Dispersive X - ray Spectroscopy (EDS) / Scanning Electron Microscope to define the components of concentrations, additionally, the films were studied the thickness and refractive index (n) by Spectroscopic Ellipsometry(SE) for nano - anatase (1%wt and10%wt) films thickness (128,382)nm and n equal (2.25,3.32), for nano - rutile films thickness (313.5,645.2) nm and n equal (2.5,2.8). Profilometer investigated the coating topography to demonstrate the Root Mean Square (RMS) toidentify the roughness which increased by increasing particle size. Fourier Transform Infrared (FTIR) analysis showed the strong bonds of the nanoparticles in frequency region between (400 - 1000) cm - 1 corresponds to Ti - O - Ti, also the bands at 793 and 1100cm - 1 were for a symmetric Si - O - Si stretching and vibration, respectively.Self - cleaning tests on the films were performed using Rhodamine B (RhB) as a pollution indicator. The effect of UV - irradiation on the films and contact angle measurements were studied. Anatase and rutile incorporated as a mixture with different ratios (1%.1.5% and 2%) in the local paint measurements, such as a washability and contrast test.Antibacterial activity in 10 - 5 and 10 - 3 TiO2 concentrations exhibited superior antibacterial activity with two types of bacteria, Escherichia coli (E - coli) and Staphylococcus aurous (S. aureus), respectively. TiO2 nanoparticles were more efficient as antibacterial agents with Staphylococcus aurous as compared with E - coli.

دراسة علاقة مجاميع الدم ABO مع البين ابيضاضي 18 المرتبط بالبروتين الفا والبين ابيضاضي 18 مستقبل البيتا في النساء العراقيات العربيات المصابات بالسكري من النوع الثاني == Studying the Association of ABO Blood Groups with IL - 18BPa & IL - 18R beta in the Iraqi Arab Females with Diabetes Mellitus Type 2

اسم المؤلف: زينب فاضل عبد الغفور
اسم المشرف: اسماء محمد صالح المهيدي
الموضوع العام: علوم الحياة
السنة: 2015
الموضوع الدقيق: الحيوان - الوراثة
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: داء السكري كمرض التهابي يرتبط مع العديد من العوامل الالتهابية لذلك تهدف الدراسة الحالية لحساب تركيز العامل البين ابيضاضي 18 المرتبط بالبروتين الفا والعامل البين ابيضاضي 18 مستقبل البيتا مع عوامل الخطورة التقليدية والتي تشمل المقاييس الفيزيائية مثل متوسط محيط الخصر ومؤشر كتله الجسم وعوامل البيو كيميائية مثل الانسولين , مقاومة الانسولين , مستوى السكر في الدم في حاله الصيام ,مستوى الهيموغلوبين السكري وملف الدهون وفي الوقت نفسه دراسة ارتباطهم مع نظام الدم ABO في النساء العراقيات العربيات المصابات بالسكري من النوع الثاني ومن اجل معرفة تاثير ذلك مع عوامل اخرى التي تعتبر كمؤشر او مطور لمرض السكري من النوع الثاني . وشملت الدراسة الحالية 340 مريضا من النساء العراقيات العربيات المشخصات حديثا بالسكري من النوع الثاني 200 من النساء الاصحاء اختبرت للتكرار الاليلي والمظهري ,ومن هؤلاء 60 مريضة اختبرت للدراسة المناعية والكيميائية مقارنة مع 28 من النساء الاصحاء .الاختبارات المناعية بواسطة استخدام تقنية الانزيم المرتبط المناعي, اما المقاييس الكيميائية باستخدام الاساليب الانزيمية واللونية, وتم تقسيم المرضى والسيطرة حسب مجاميع الدم الى اربعة مجاميع ثانوية (A , B ,AB ,O) وفقا لنوع فصائل الدم التي كشف عنها بواسطة الاختبارات المصلية القياسية .اظهرت البيانات الحالية : 1 - زيادة معنوية في المصل العامل البين ابيضاضي 18 المرتبط بالبروتين الفا في المرضى الحاليين ,في حين لم تظهر اختلافات معنوية في مستوى مصل العامل البين ابيضاضي 18 مستقبل البيتا .2 - زيادة معنوية في متوسط العامل البين ابيضاضي 18 المرتبط بالبروتين الفا مع زيادة العمر في كل من المرضى ومجموعه السيطرة, في حين العامل البين ابيضاضي 18 مستقبل البيتزااد في المجموعة الاقل من 40 سنة وانخفض مع زيادة العمر في كل من المرضى ومجموعه السيطرة .بالاظافة الى زيادة كل عوامل الخطورةالاخرى.3 - تركيز كلا العاملين العامل البين ابيضاضي 18 المرتبط بالبروتين الفا والعامل البين ابيضاضي 18 مستقبل البيتا يزداد بشكل غير معنوي تدريجيا في كل المرضى مع زيادة مدة المرض ونفس النتيجة لمقاومة الانسولين.4 - اظهرت نسبة الهيموغلوبين السكري اقل من 7.3 % زيادة كبيرة في متوسط العامل البين ابيضاضي 18 المرتبط بالبروتين الفا , العامل البين ابيضاضي 18 مستقبل البيتا وتنخفض تدريجيا مع زيادة نسبة الهيموغلوبين السكري .5 - الافراد الذين كانوا يحملون فصيلة الدم B اظهروا اعلى معدل لمتوسط العامل البين ابيضاضي 18 المرتبط بالبروتين الفا , الانسولين ومقاومة الانسولين .6 - المرضى الذين كانوا يحملون فصيلة الدم B والاصحاء الذين يحملون فصيلة الدم A اظهروا اعلى معدل لمتوسط العامل البين ابيضاضي 18 مستقبل البيتا .7 - يعتبر العامل البين ابيضاضي 18 المرتبط بالبروتين الفا والعامل البين ابيضاضي 18 مستقبل البيتا كعوامل خطورة مستقلة في النساء العراقيات العربيات المصابات بالسكري من النوع الثاني والتي تدعمها غياب العلاقة المعنوية بين العامل البين ابيضاضي 18 المرتبط بالبروتين الفا والعامل البين ابيضاضي 18 مستقبل البيتا وجميع عوامل الخطورة التقليدية الاخرى .8 - هنالك علاقة ايجابية بين مستويات العامل البين ابيضاضي 18 المرتبط بالبروتين الفا وخطورة السكري من النوع الثاني والذي قد يعتبر كمؤشر لحدوث المرض , في حين ان مستويات العامل البين ابيضاضي 18 مستقبل البيتا قد يكون مؤشر لتطور المرض .مزيد من الدراسات اللازمة لفهم العلاقة بين مجاميع الدم , عوامل الالتهابية ومخاطر السكري من النوع الثاني . | DM is considered as inflammatory disease associated with many inflammatory factors. As such the present study aims to investigate the concentration of IL - 18 binding protein alpha (IL - 18BPa) and IL - 18R beta with classical risk factors which include Anthropometric risk factors like Age, Central Obesity (CO) and body mass index (BMI), biochemical factors like Insulin , Insulin Resistance (IR), Fasting Blood Glucose ( FBG), Glycosylated Hemoglobin (HbA1c) and lipid profile. Besides, the study aims to studying their association with ABO blood system in the Iraqi Arab female patients with diabetes mellitus type 2 in order to figure out their effect with other factors as predictor or developer for diabetes mellitus type 2. The present study included 340 Iraqi Arab female patients newly diagnosed with DMT2 and 200 healthy individuals tested for phenotype and allele frequency. From those, 60 patients were tested for the immunological and chemical where compared to 28 healthy individuals. Immunological tests by using ELISA kits. While Chemical parameters using enzymatic and colorimetric methods. The study groups (patients and control) were divided into four sub groups (A, B, AB and O) according to the class of blood groups which were tested by using standard serological procedures. The present data showed : 1 - A significant increase in the serum level of IL - 18BPa in the patients of the present study, while there was no significant difference in the serum level of IL - 18R beta. 2 - A significant increased in mean of IL - 18BPa with increased age in both patients and control groups. While IL - 18R beta showed increase at group less than 40 year and decreased with increasing age in both patients and control group. Besides increased all other risk factors. 3 - The levels of both IL - 18BPa and IL - 18R beta were gradually non significantly increased the level in each patients group with an increased duration of disease and the same for IR. 4 - Patients with HbA1c less than 7.3% showed a significant increase in mean of IL - 18BPa and IL - 18R beta and decreased gradually with the increase of HbA1c. 5 - Patients and control subjects who carried blood group B had the highest mean of IL - 18BPa, Insulin and Insulin resistance. 6 - Patient subjects who carried blood group B and control subjects who carried blood group A showed the highest mean of IL - 18R beta. 7 - IL - 18BPa and IL - 18R beta act as independent risk factors in Iraqi Arab females with DMT2 which supported by the absence of significant correlation among IL - 18BPa, IL - 18R Beta and all others classical risk factors. 8 - A positive relation between levels of IL - 18BPa and risk of DMT2. This may be an indication of inflammation for newly diagnostic diabetic patients, while Serum levels of IL - 18R beta might be a predictor marker of disease progression. Further studies are needed to understanding the relationship between blood groups, inflammatory markers and risk of DMT2 in healthy population.

عزل وتشخيص بعض انواع البكتريا المكسرة للهيدروكاربونات النفطية الاليفاتية في الترسبات النفطية لمحافظة البصرة == Isolation and Identification of some species of degradable Bacteria of N - Alkanes hydrocarbons compounds in oil sludge at Basrah Governorate

اسم المؤلف: استبرق عبد الحسين سلمان جدي البوغازي
اسم المشرف: ميثم ايوب عبد القادر الحمداني
الموضوع العام: علوم الحياة
السنة: 2015
الموضوع الدقيق: الاحياء المجهرية
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: In the oil industries, large amounts of oil sludge are generated through the refining of crude oil. The main reason for its composition that is when exporting crude oil various kinds of oils (heavy and light ones) are mixed together for the purpose of exportation. But , the mixing process between different types cannot be fully , due to the lack of homogeneity among different quality of crude oil . So, the heavy parts of oil are precipitated to the bottom of tank and with passage of time they accumulate to be sediments that’s known as oil sludge stated at the bottom of the oil storage tank in the cleaning process , oil tanks are emptied and discharged in some spaces or reservoir (pits) located near the tanks called "oil pits". Which are places of dump excess oil of various types of oil from different oil tanks or they are close places from oil / water separating unites .From these spots, samples of two kinds of oil sludge : the bottom of oil tank (during the maintenance of the tank) and oil pits (near the unities of separating water from oil) are collected. Also, samples of soil surrounding the oil pits from five oil locations in Basrah city are collected too. Those locations are : west of Gurna, Northern Rumela, Southern Rumela, Nahar Umar, Alzubeir.At the rate of redundantly for each location and for each type of the study samples.This investigation is considered as the first which conducted in Iraq which include firstly the isolation and identification different types of bacterial species from different oil sludge, and secondly use some of them in biodegradation studies for two kinds of carbon sources of oil sludge : (oil sludge of tank bottom , oil sludge of oil pits) .Oil degrading bacterial species have been isolated on a selective mineral salt medium Bushnell and Hass Mineral Salt Medium (BHMS), supplemented with a carbon source. They are also identified depending on the Morphology and biochemical characteristics; four genus of bacteria (out of 89 bacterial isolates of oil sludge from the tank bottom)Bare identified. They include : 32 Pseudomonas spp. , 27 Rhodococcus spp. 21 Bacillus spp. , 9 Arthrobacter spp. , Also four genera of bacteria (out of 101bacterial isolates of oil sludge from the oil pits) are identified. They include : 41 Pseudomonas spp. 27 Rhodococcus spp. , 22 Bacillus spp. 11 Arthrobacter spp. , , While 8 species and 3 genus of bacteria (out of 259 bacterial isolates of the soil surrounding the oil pits) are identified. They include : 41 Aeromonas spp., 39 Corynebacterium spp., 39 Pseudomonas aeruginosa, 36 Bacillus spp., 33 Micrococcus leteuc, 23 Enterobacter intermedius, 22 Pseudomonas fluorescens, 12 Micrococcus varians 7 Staphylococcus epidermidis, 4 Staphylococcus saprophyticus,3Staphylococcus aureus .The biodegradation percentage of the lost in the concentration of the hydrocarbon compounds of the normal alkanes and two compounds of Pristane and Phytane are measured. Also, the biodegradation of mole percentage of the lost in the area of the hydrocarbon compounds of the normal alkanes and the two compounds of Pristane and Phytane are measured for each four genus which were isolated from the oil sludge pits, and it is also done for one isolated genus from the soil surrounding the oil pits. The measuring process was fulfilled as a comparative study with the control flasks. Thus, the oil sludge (tank bottom ) was used as a source of carbone in the first experiment While, the oil sludge (oil pits) was used as a source of carbone in the second experiment . The incubate time of the experiment is 27 days during which a lost of the percentage of hydrocarbon compounds each 9 days are recorded by using( Capillary Gas Chromatography ). The results showed the biodegradation percentage of the lost in the concentration of the hydrocarbon compounds of the normal alkanes of the oil sludge (tank bottom ) with regard toCbacteria 73.8 % Pseudomonas spp., 70.3 % Rhodococcus spp. 65.7 % Arthobacter spp., 55.6 % Aeromonas spp.,51.5 % Bacillus spp., Whereas, the biodegradation percentage of the lost in the concentration of the hydrocarbon compounds of the normal alkanes of the oil sludge (oil pits) with regard to bacteria 80 % Pseudomonas spp., 74.9 % Aeromonas spp., 70.4 % Rhodococcus spp., 64.8 % Arthobacter spp.,55 % Bacillus spp., While , The results showed of the biodegradation of mole percentage of the lost in the area of the hydrocarbon compounds of the normal alkanes of the oil sludge (tank bottom ) with regard to bacteria 73.7 % Pseudomonas spp.,70.3 % Rhodococcus spp. 65.6 % Arthobacter spp., 55.3 % Aeromonas spp. ,51.2 % Bacillus spp., Whereas, The results showed of the biodegradation of mole percentage of the lost in the area of the hydrocarbon compounds of the normal alkanes of the oil sludge (oil pits) with regard to bacteria79.2 % Pseudomonas spp., 73.8 % Aeromonas spp., 69.2 % Rhodococcus spp.,63.7 % Arthobacter spp., 53.7 % Bacillus spp. It was found that there is approximately match between the biodegradation of mole percentage by using the area and those by using the concentration for each component .

طرق تكرارية موثوقة لحل معادلات فولتيرا التكاملية ضعيفة الانفراد الخطية وغير الخطية من النوع الثاني == Reliable Iterative Methods for Solving Linear and Nonlinear Weakly Singular Volterra Integral Equations of the Second Kind

اسم المؤلف: علي محمود شيحان علي
اسم المشرف: مجيد احمد ولي
الموضوع العام: علوم الرياضيات
السنة: 2015
الموضوع الدقيق: الرياضيات
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The main aim of this thesis is solve weakly singular Volterra integral equations of the second kind of non - linear type in the form of a series with easily computable terms by using two methods. The first method is called the modified iterative method (DJM) which is proposed by Daftardar - Gejji and Jafari and the second is called the modified power series method (MPSM). Moreover, the comparison with an existing method such as Adomian decomposition method will be presented to demonstrate the efficiency of the proposed methods.Some examples will be solved to demonstrate that the presented methods are very effective, simple and does not require any restrictive assumptions.The first part of this thesis will discuss solving of weakly singular Volterra integral equations of the second kind and provide some definitions that we will be used later.The second part of this thesis deals with the implementation of the new iterative method namely (DJM) to solve the non - linear Volterra integral equations with weakly singular kernel of the second kind.In the third part, the recursive method namely the modified power series method (MPSM) is presented to solve the non - linear Volterra integral equations with weakly singular kernel of the second kind. Software to be learned and used in this thesis is MATHEMATICA.

انواع معينة من المؤثرات الخطية في فضاء هيلبرات الاحتمالي == Certain Types of Linear Operators on Probabilistic Hilbert Space

اسم المؤلف: لانا عزيز يوسف المطلبي
اسم المشرف: راضي ابراهيم محمد علي
الموضوع العام: علوم الرياضيات
السنة: 2015
الموضوع الدقيق: الرياضيات
الدرجة: ماجستير
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The purpose of this thesis is to present certain types of linear operators on Probabilistic Hilbert Space. The definition of these operators is based on the definition of probabilistic inner product space which was first given by Schweizer and Sklar [17] in 1983.Some authors, later, studied this concept and introduced a new definition for the probabilistic inner product space (PIP - space). This new definition is called (The modified probabilistic inner product space).This thesis actually centers on introducing the Self - adjoint operator, ???? - bounded operator, ???? - continuous operator and ???? - compact operator that are defined on probabilistic Hilbert space. Their properties and connections are also discussed

المجموعة المغلقة من النمط في فضاء تبولوجي ناعم بالنسبة الى مثالي == Soft Strongly Generalized Closed Set with respect to an Ideal in Soft Topological Space

اسم المؤلف: اليسع جاسم بديوي
اسم المشرف: نرجس عبد الجبار داود
الموضوع العام: علوم الرياضيات
السنة: 2015
الموضوع الدقيق: التبولوجيا
الدرجة: دكتوراه
الجامعة: جامعة بغداد
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: In this work, we introduced and studied a new kind of soft generalized closed set in soft topological spaces with an ideal, which we called soft strongly generalized closed set with respect to an ideal where a soft subset (A,E) of a soft topological space with an ideal I, (X,τ,E) is said to be soft strongly generalized closed set with respect to an ideal I ,(briefly SSIg - closed), if cl(int(A,E)) - (B,E)∈I , whenever (A,E)  (B,E) and (B,E) is soft open set. And denoted by SSIg - closed set . The complement of SSIgclosed set is called an SSIg - open set.We studied the properties of SSIg - closed set, then we used SSIg - open set to define five kinds of derived sets, which are the SSIg - interior, SSIgclosure, SSIg - derived, SSIg - border, and SSIg - boundary with their relations and properties .On the other side, we define new kinds of soft mappings between soft topological spaces, like SSIg - continuous, Contra - SSIg - continuous, SSIgopen, SSIg - closed and SSIg - irresolute mapping we studied the relations between these kinds of mappings and the composition of two mappings of the same type of two different types, with proofs or counter examples
1 ... 17 18 19 20 21 ... 81