Show: 25 50 75 100 Results

Search results: 25 out of 2,259

دراسة الخواص البصرية والكهربائية لصبغات عضوية == Study of optical and electrical properties of organic dyes

Author name: علي ستار جبار الصيمري
Supervisor name: وليد علي حسين | فرات احمد مهدي
General topic: Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: In this study, thin films of polyvinyl alcohol (PVA) doped with Orange G , Safranin O , and Crystal Violet dyes , have been prepared by using casting method after dissolving the dyes with distilled water .The linear optical parameters of the prepared thin films such as absorption coefficient (α) , extinction coefficient (k) , refractive index (no) and energy gap (Eg) , in addition to Urbach tails (Eu) , both real (εr) and imaginary (εi) parts of the dielectric constant , optical conductivity (σopt) , and electrical conductivity (σele) have been studied. The non linear absorption coefficient (β), non linear refractive index (n2) and the susceptibility of the third order (χ3) have been studied too .It is found that the absorption spectra of the prepared thin films are characterized by a clear absorption peaks in the visible range of the light spectrum . For Orange G two absorption peaks were appeared at the wavelengths (325 nm) and (490 nm) , where as one absorption peak is observed for each of Safranin O , and Crystal Violet at the wavelength (540nm) and (600nm) respectively. It is worth noting that the different concentrations of the dyes have an obvious traces on the absorption intensities of the thin films , which may be related to the extended Urbach tails as a result of increased dye concentration and (π - π*) transition .The estimated energy gaps gave an indication that an indirect allowed electronic transition take place and it is inversely slightly affected by the concentration of the dyes.The non linear optical properties for the prepared thin films were studied using Z - scan technique . Three different cases in which the materials are ; thedye solution consist of the dye dissolved in distilled water , the dye solution mixed with the polymer , and the dye doped thin polymer film , were studied using continuous wavelength (532 nm) solid state semiconductor laser type (SDL - 532 - 100T) .The results indicated that the calculated (β) and (n2) increases as a results of increase in the concentration for all the three mentioned cases . Defocusing due to thermal distribution through the samples which were accompanied with a changes in non linear refractive index were shown , that is , the samples behave like a thermal lens that distort the phase of the propagated beam in it .The (I - V) characteristics for all thin films give an indication of Ohmic behavior and the DC electrical conductivity (σele) increases as the temperature increase . The activation energies (Ea) were found to be decrease at higher dyes concentrations .

حسبة كثافة الحالات الالكترونية للسطح في تفاعل الايونات البطيئة مع سطوح المعادن والاغشية الرقيقة == Calculation of surface density of states in slow ion interaction with metal surfaces and thin films

Author name: علاء عادل شنيف الغزي
Supervisor name: طالب عبد النبي سلمان
General topic: Physics
Specific topic: Electronics Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: This study included in using a theoretical model that already made to calculate the probability of the electronic Emission from the surfaces of Metals as a result of helium ion scattering at these surfaces , the ions motion is at the direction of the surface and depends on the atomic level broadening and the emitted electrons spectrum , also on probability of neutrality or survival of the ion , to initiate the theoretical model to calculate the electronic density of states of the surfaces of metals and thin films using experimental data of previews studies of the Auger neutralization spectrum for this surface .From the experimental data we calculate the Auger transform , , considering the electronic density of states in the valence band to the surface as convolution forming to Auger transform and by using fourier,s transformations we get the electronic density of states at the surfaces of Nickel Ni, Copper Cu, Aluminum Al and tungsten W and for same thin film such of MgO , MgCaO, MgSrO.

تحضير ودراسة بعض الخصائص الفيزيائية للمتراكب بولي انلين طين الكاؤولين العراقي == Preparation and study of the Some physical properties of imbricated Polly Aniline - IraqiAlca?lan clay

Author name: عباس عبد سويف البديري
Supervisor name: غفران محمد باقر شبيب
General topic: Physics
Specific topic: Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: Polyanilin/Alcaulan Iraqi clay was modify by mecanochemical method with ideal condition and temperature range (0 - 5)0c after distillation Aniline (monomer) well.Several techniques have been used such as FT - IR ,X - ray to determine the crystalline ,scanning electron microscope (SEM) and finally (FAM) in order to study the surface roughness mediated .Many of physical properties such as mechanical properties which represented by hardness curves at different temperature which proved in hardness values range (2 - 7) for Alcaulan clay and (3 - 9.5) for PAni/Alcaulan while the results of tests fracture resistance (according to Brazilian way ) in different temperature was (2.9 - 4.92) for Alcaulan clay and (3.1 - 5.01) for PAni/Alcaulan .Optical properties show the type of electronic transition which found indirect transition and the optical energy gap about 2.15 eV.PAni/Alcaulan films was prepared by adding hydrochloric acid HCL after dissolved it in DMF as well as with addition to sulfuric acid H2SO4.The value of electrical conductivity of PAni - HCL/ Alcaulan are (0.4*10 - 7, 0.6*10 - 7, 0.7*10 - 7, 0.8*10 - 7, 0.9*10 - 7) s/cm. The value of PAni - H2SO4/Alcaulan are (4*10 - 7, 6*10 - 7, 6.5*10 - 7, 7.3*10 - 7, 9.1*10 - 7) s/cm.Also the value of electric conductivity of PAni - HCL/ Alcaulan with Iodine are (2*10 - 7, 6*10 - 7, 8*10 - 7) s/cm , and of PAni - H2SO4/Alcaulan are (19*10 -

تضمين البرم في ليزرات اشباه الموصلات (ليزرات البرم) == Spin Modulation in Semiconductor Lasers (Spin lasers

Author name: ضیاء جبار عكوش
Supervisor name: حسن عبد الله سلطان
General topic: Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: The introducing of electronic spin with its charge is the key of many applications which uses the electrical and magnetic properties of the electron , (spintronics )and semiconductor lasers.This concept gives led to the newest type of semiconductor lasers called ( Spin Lasers ).In the present thesis a numerical study of the effect of the carriers spin on the semiconductor lasers described by VCSEL using Matlab and Runge - Kutta method .The study includes the effect of the spin polarization in terms of the polarization injection and the injection current also to find the two thresholds of right polarized light circularly and the left circularly polarized one.The effect of the spin relaxation time on the dynamics of spin - VCSEL such as the steady state time evolution and direct modulation of the injection current and the polarization injection were studied also is presented too.The study shows that the spin VCSEL strongly affected by the injection current , polarization injection and spin relaxation time.The present results show that the laser threshold can reduced to quarter than that of conventional laser.

تحضير ودراسة بعض الخواص الكهربائية والبصرية للبوليمر الموصل بولي (انيلين اوكزالك) - وامكانية تطبيقاته في الخلايا الشمسية == preperation and studying some of the electrical and optical properties of conducting polymer poly(aniline - oxalic) and the possibility of its applications to solar cell

Author name: صفا نزار رمضان
Supervisor name: غفران محمد باقر شبيب
General topic: Physics
Specific topic: Solar Energy Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: We present in this study away of preparing Poly(aniline - oxali) (PAni - ox) by a Chemical polymerization with an ideal environment and temperature (5 - 0)0C. The Optical properties have been studied included the absorbance and transmitance measurements and calculations of the energy gap for (PAni - ox), which was found equal to (2.6eV). Electrical properties of (PAni - ox) have been also studied. The electrical conductivity for these materials was ( 8.22x10 - 2S.cm - 1) at room temperature.Thin films of titanium dioxide TiO2 of particle size (50 nm) and (25 nm) have been prepared and then deposited on a conductive glass bases Fluorine doped tin oxide (FTO) to study the optical properties.The materials under study have been diagnozid by using several techniques including X - rays (XRD) technique to determine the crystalline structures , Infrared (FT - IR) to determine the effective groups ,and Atomic Force Microscope (AFM) to determine the surface roughness and the regularity range of the nanoparticles compositions. Optical Anode was prepared by adding (PAni - ox) to TiO2, and the efficiency of the solar cell was calculated Two types of pigments alpha - Naphtholbenzein and EOSIN Y were added to TiO2 films and the prepared polymer is (PAni - ox). The pigments absorbs the solar energy and converte it to free electrons that are injected into titanium dioxide, which works as a collector for electrons. Electro solution was added to compensate for the loss electrons from the organic dye molecules. Thereafter, the electrode for the solar cell was prepared from carbon which has been obtained from candle flame.After preparation, the individual parts of solar cell have been collected by multi - layeres method . The (carrent - voltage) feature for cells by electrical properties have beem measured device and Light source.From this measurement , we calculate the open circuit voltage Voc and closed - circuit current Isc ,maximum power Pmax ,filling factor F.F, cell efficiency η, and Parallel resistance Rs and Resistance respectively Rsh.

تاثير م عاملات الاضطراب الجوي على حسابات منظوما ت المدى الليزرية == Effect of Atmospheric Turbulence parameters on Laser Range systems calculations

Author name: صادق عطية راشد
Supervisor name: حسن حمادي محمد
General topic: Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: In this thesis, an equation of atmospheric turbulence factor were derived the effect of such factor of the laser beam path of Er - Glass laser of ( 1.54m)wavelength. The results were copared at distances and propagation modes of laser beam in the atmosphere. Analysis system was used to determining the effect of atmospheric turbulent parameters, which are : laser beam radius at transmitter Wo, turbulent factor turb τ and intensity correction at target surface Pshape . And received power at photo detector for laser range finder LRF, additional study of effect the variation of refractive index strcture paramete 2 n c , inner - scale turbulence l , and the aperture dimension of photo receiver rec. r on the values and shape of receiving power, according the signal to noise ratio SNR equation , maximum range of the LRF in different weather conditions and compared with the results of the international literatures. New equation of Gaussian beam for calculation the efficiency of LRF system performance in the turbulent medium. Analytical comparsion for power and range calculations from the concluded equation of the Gaussian beam which take into consideration the effect of the turbulent attenuation in the range calculation, A special equation for power shift in the different two cases, which are in the present and absent of turbulence.A partical addition to this study, the weather elements are measured in to the Basrah city atmosphere locally with the maximum range Rmax for the LRF in the two different season summer and winter.An equation of receiving rangeof laser target designator system LTD using Lambert function is estimated and compared its results with concluded equation of recent researches. MATLAB - 7 sorces code program were written to declare the effect of turbulent parameters on ranging and disgnation calculations, also describe the effect of the laser beam power variation in range calculations. The ideas and results of this study are used to design an LRF and LTD in different weather conditions and alternative weather turbulent variance.

الخواص البصرية اللاخطية ومحدد القدرة البصري للصبغات العضوية في المحاليل والاغشية البوليمرية باستخدام تقنية مسح حزمة الليزر على المحور z == Nonlinear Optical Properties and Optical Power Limiting of Organic Dyes in Solutions and Polymer Films Using The Laser Beam Z - Scan Technique

Author name: سيف الدين عبد الكريم قاسم
Supervisor name: عماد الدين حسين علي السعيدي
General topic: Physics
Specific topic: Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: The research in this thesis is concerned with our extensive study of the spectral properties, the nonlinear optical properties, and the optical power limiting effect, for three organic dyes : Leishman, Giemsa, and Brilliant Cresyl Blue. Three different solvents were used to dissolve each dye : Chloroform, Ethanol, and Dimethyl(formamide) (DMF).We prepared dye solutions at four different concentrations : 0.03 mM, 0.05 mM, 0.07 mM, and 0.09 mM. Dye doped polymer films at concentration 0.09 mM were also prepared by mixing the dye with the polymer poly(methylmethacrylate) (PMMA) which already dissolved in the chloroform and using the casting method to obtain the desired polymer films.The linear absorption spectra of the dye solutions and the dye doped polymer films for different concentrations were analyzed by using the double - beam spectrophotometer in order to find the spectral range for each dye .2Our study was focused mainly on the nonlinear optical properties of the dye solutions and the dye doped polymer films. We employed in this study the laser beam z - scan technique and the solid - state laser (SSL) operating with the continuous wave (CW) at wavelength 532 nm and with variable output power over the range 0 - 100 mW .We have also studied the effect of the laser beam intensity on the nonlinear optical parameters of the dye solutions prepared by dissolving each dye in the Dimethyl(formamide) (DMF) solvent. Two values for the laser beam intensity were used for irradiating the samples (The dye solutions), these are : 1.11 kW / cm2 and 2.22 kW / cm2.Our obtained results from the present study reveal that all solutions of the three dyes and the dye - doped polymer films have a negative value for the nonlinear refractive index (n2 < 0) (occurrence of the self - defocusing effect) and also a negative value for the nonlinear absorption coefficient (β < 0) (saturable absorption).The values of the nonlinear optical parameters for each dye were calculated, these parameters are : The nonlinear refractive index (n2), the nonlinear absorption coefficient (β), and the absolute value of the nonlinear optical susceptibility (|χ(3)|). The solvents effect on the values of these optical3parameters was studied, and we find that the solvent plays an important role on the variation of these values.We also studied the optical power limiting for the dye solutions and the polymer films by using the laser beam z - scan technique. Good optical power limiting properties were obtained. The values of the optical power limiting threshold for the dye solutions at different concentrations and also for the dye doped polymer films were determind. We note that the value of the optical power limiting threshold depends on the kind of the used solvent for dissolving the dye. The smallest value for the optical power limiting threshold is 6.7 mW for the Brilliant Cresyl Blue dye doped polymer in chloroform at concentration 0.09 mM, while the smallest value for the power limiting threshold for the Brilliant Cresyl Blue solution in the same solvent at concentration 0.09 mM is 7.8 mW. The value of the power limiting threshold depends the kind of the used dye or the kind of the used solvent in preparing the sample and also on the concentration of the dye.The results that we have obtained from our present study show that the three dyes, Leishman, Giemsa, and Brilliant Cresyl Blue exhibit large nonlinear optical effects, suggesting that they are good promising materials for applications in the nonlinear photonic devices, the optical power limiting, and other optical devices.

تحضير اغشية رقيقة من اوكسيد الخارصين ZnO النقي والمشوب بالالمنيوم باستخدام تقنية المحلول ودراسة خواصها البصرية (Sol - Gel) الغروي وتطبيقها كمتحسس غازي == Preparation of Pure and Doped with Aluminum Zinc Oxide (ZnO) Thin Films by Using (Sol - Gel)Technique and the Study of Optical Properties and Applications as A Gas Sensor

Author name: سعد عبد الله جبر الفاضلي
General topic: Physics
Specific topic: Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: In this study, Zinc Oxide (ZnO) thin films are prepared by using Sol - Gel technique . The samples are prepared with different thicknesses (58,69,77)nm . Different weight ratio of Aqueous aluminum chloride (AlCl3.6H2O) are added to the Sol - Gel ZnOwith percentage (0.345%, 0.824% , 1.703% and 2.146%). These solutions are deposited by using spin coating on glass substrate .In order to investigate the sensitivity and the response of these samples for the detection about different vapors and gases (ethanol , methanol , acetone and nitrogen ) , pure and (AlCl3.6H2O) doped ZnO films are prepared by using the same technique but by adding Aluminum electrodes on these films with dimensions (2.5x0.5)cm2 .This preparing is followed by thermal treatment for these films by using oven with temperature reaches to 450 oC.The structure properties of these films are studied by using X - ray diffraction (XRD) and the results show that these films are polycrystalline and the calculated lattice constant are close to the standard values . The samples are analyses by Field Emission Scanning Electron Microscopic (FESEM) and the results show that the grain arrangement are regular and these structures are packed and the grain shape is as spherical . But for the AZO films , we notice that the increasing of the doping percentage reduces the gra in size .We also study the optical properties of these films such as Absorption (A) , Transmission (T) , Reflection (R) , Absorption coefficient (α) , extinction coefficient (k) , the energy gap(Eg) , refractive index (n) , with its complex and real dielectric constant( ) , dissipation factor (tanδ) , Optical Dispersion Parameters (Eo , Ed) and optical conductivity ( ) . The effect of the films thickness on the optical properties of the ZnO films for the over mentioned parameters . The results we get are discussed and compared with other studies . This work elucidates and analyzes the studying of the effect of adding (AlCl3 . 6H2O) o Zinc Oxide (ZnO) and the results are with standards agree with the results of many other researchers . The optical constant are tabulated and compared with , the results of other . And in order to determine the electronic transitions type , Absorption coefficient is calculated and it shows that ZnO and AZO films have transition of direct type because the values of α > 104 . The energy gap of the ZnO films with different thickness (58,69 and 77) nm is calculated , since it is found that the increasing of the film thickness gives slight increasing in the energy gap . The experimental results show that the increasing of doping percentagein ZnO film increases the energy gap with very little amount . In the electronic application field , the study also included design and fabrication of gas sensor system from local materials , which contain of chamber that made of plates polymer that contain of base for install the sample , electrodes to link the sample the measurement circuit , glass flask with three holes , heater , N2 gas cylinder , glass tubes , valves and the measurement circuit electric .The study also includes the ability of responding of the films for the thicknesses (58 , 69 and 77 )nm , to these gases , and it is found that the highest response was at vapor ethanol at the thickness 58nm. The effect of chloride Aluminum on the response of these percentage (0.345% , 0.824% , 1.703% , 2.146%) is studied for the mentioned gases , and it is found that the highest response we get is 45% at the concentration 2.146% for methanol gas . The results are tabulated , discussed and compared with precedent studies.

دراسة تراكيز الرادون والثورون والراديوم ومعدلات الانبعاث الكتلي والتبخر السطحي للرادون في البقوليات الجافة والعسل الطبيعي == Study of Radon , Thoron , Radium concentrations ,as well as the mass and surface exhalation rates in dry legumes and natural honey

Author name: سارة عبد اللطيف كديمي
Supervisor name: عيسى جاسم محمد الخليفة
General topic: Physics
Specific topic: Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: In this study a sample of 50 different dry legumes and honey used (local and imported), the number of dry legumes samples under study were 21, including 5 samples of local and imported 16 samples collected from the Governorate of Basrah markets - Iraq. 29 samples of honey collected from local markets and apiaries in Iraq. The number of local honey 8 samples while the number of imported honey were 21 sample.Two methods in this research for various measurements and comparison between them. It is a method of (Misdaq and Satif.,1996) and the method of (Azam., 1995). Both methods are considered long - term methods for measuring the concentration of radon and thoron in various materials, Solid State Nuclear Track Detectors (SSNTDs), a closed cylinder technique method. Results in the first part of the samples dry legumes have shown that radon concentration ranges between a higher value (698.9Bq / m3) in thesample (Turkish lentil (imported)) and less valuable (69.0Bq / m3) in the samples (Iranian Homs and Chinese beans (imported)),and the concentration of thoron between the highest value (865.0Bq / m3) in the sample (Chinese beans (imported)) and the lowest value (86.45Bq / m3) in the sample (Canadian lentil (imported)), and that the radon concentration rate and thoron for samples local dry legumes (3551.1Bq / m3), (364.1Bq / m3), respectively. For samples imported dry legumes the radon concentration rate and thoron (333.0Bq / m3), (420.8Bq /m3 respectively For the results of the honey samples in the first part has found that the radon concentration between the highest value (826.7Bq / m3) in the samples ( AL - noor Honey (Basra - Seder) (Local)) , (Honey AngizaGerman (imported)) and less value (242.9Bq / m3) in the sample (Honey Mount Haj Omran (Local)), and the concentration of thoron between a higher value ( 538.4Bq / m3) in the sample (Turkish Honey) and the lowest value (115.2Bq / m3) in the sample (Honey Mount Haj Omran (Local)) , and that the concentration of radon and thoron samples of local honey rate (457.5Bq / m3), (297.0Bq / m3), respectively. For samples imported honey, the radon concentration and thoron rate(469.0Bq/m3) , (314.1Bq/m3) , respectively. Results obtained in the second part of the samples dry legumes note that the concentration of radium between the highest value of a (2.4489Bq / Kg) in the sample (Indian Homs (imported)) and less valuable (0.4030Bq / kg) in the sample (Indian Mash (Imported )), and that the concentration of radium samples local dry legumes rate (0.8941 Bq / Kg). For the samples dry legumes imported, the concentration of radium rate (0.9270Bq / Kg), the results obtained in the second part of the samples honey note that the concentration of radium ranges It is among the highest value (1.7270Bq / Kg) in the sample (Honey fall Karbala (Local)) and less valuable (0.2111Bq / Kg) in the sample (Honey Mount Haj Omran (Local)), and that the concentration of radium samples of local honey rate (0.7441 Bq / Kg). For the samples of imported honey, the concentration of radium rate (0.6141Bq / Kg).Results mass emission rates of radon samples dry legumes, ranging from the highest value (0.4442Bq.Kg - 1.d - 1) in the sample (Indian Homs (imported)) and the lowest value (0.0731Bq.Kg - 1.d - 1) in the sample (Indian Mash (imported)) , and the arithmetic average of the mass emission rate of the samples the local dry legumes (0.1540 Bq.Kg - 1.d - 1), and for dry legumes imported (0.1681 Bq.Kg - 1.d - 1), and the results of area emission rates radon samples dry legumes, ranging from the highestvalue (2.0405 Bq.m - 2.d - 1) in the samples (Indian Homs and Turkish lentil (imported)) and the lowest value (0.5681Bq.m - 2.d - 1) in the sample (Indian Mash (Imported)), and the arithmetic average of the rate of the area emission rate of surface samples local dry legumes (1.0865 Bq.m - 2.d - 1), and for samples of imported dry legumes (1.1589 Bq.m - 2.d - 1). Results mass emission rates of radon samples of honey, ranging from the highest value of ( 0.3132 Bq.Kg - 1.d - 1) in the sample (Honey fall Karbala (Local)) and the lowest value (0.0383Bq.Kg - 1.d - 1) in the sample (Honey Mount Haj Omran (Local)), and the arithmetic average of the mass emission rate for samples of local honey (0.1359 Bq.Kg - 1.d - 1), and for samples of imported honey (0.1114 Bq.Kg - 1.d - 1), and the results of area emission rates of radon samples of honey, ranging from the highest value (3.1286 Bq.m - 2.d - 1) in the sample (AL - noor Honey (Basra - Seder) (Local)) and the lowest value (0.6257 Bq.m - 2.d - 1) in the sample (Honey ount Haj Omran (Local)), and the arithmetic average of the rate of area ssion samples of local honey (1.4828 Bq.m - 2.d - 1), and for samples of imported honey (1.1670 Bq.m - 2.d - 1).

تحضير الياف نانوية موصلة من الخلائط البوليمرية PANI : DBSA/PS بطريقة الغزل الكهربائي واستخدامها في تصنيع خلية شمسية عضوية - لاعضوية == Synthesis Semiconductor Nanofiber of Polyblend (PANI : DBSA/PS) By Electrospinning Method and Application in Solar Cell

Author name: دلال نصر منشد
Supervisor name: كريمة مجيد زيدان | علاء شاوي مشعان
General topic: Physics
Specific topic: Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:

دراسة حركيات ليزر النقطة الكمية بوجود البرم == Study of Dynamics of Quantum Dot Laser with Spin

Author name: حكمت عبد الحسين ابراهيم
General topic: Physics
Specific topic: Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: The dynamics of VCSE QD spin polarized laser is studied based on asix equations model that takes into account the effect of number ofcontrol parameters on populations in the wetting layer for bothpolarized components and those in the quantum dot .The carrier density in the wetting layer and the quantum dot vary indifferent manner although the former lends to the later . Also thedynamics of carriers in the quantum dot shows varieties of dynamicsthat range from simple to complex one while the dynamics of carriersin the wetting layer are always simple .The polarized field related to the spin up and spin down cases sufferseffects in different manners due to the variations of these controlparameters . the intensities of both two polarized components behavioralso range from simple and end up chaotically.It appears that output ellipticity can be used as a new tool to assess the dynamical state of the laser wither it in stable , periodic , aperiodic or chaotic .The modulation of the injection current for both components or for either one led to new dynamics , the system was not able to show when it work autonomously although the model has five degrees of freedom .

خصائص نقل الالكترون العابر لانظمة نقاط كمية متعددة == Transient Electron Transport Properties of Multiple Quantum Dots Systems

Author name: حسه ابراهيم عسكر
Supervisor name: شاكر ابراهيم عيسى
General topic: Physics
Specific topic: Electronics Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: We presented a theoretical study for the electron transportcharacteristic, within a system of multi - quantum dots coupled tothe three metallic leads (right lead as an electron reservoir andtwo left leads as an electron source). We take into account twoarrangements for the scattering regions, one composed of twoquantum dots and the other is composed of four quantum dots.The study concentrated on the system parameters that has itseffect on the characteristic of the electron transfer process andhow these characteristic are affect by the number of the quantumdots in the scattering region in the both arrangements for thescattering regions.The theoretical formulism depends on the one - electron model.Where, we assigning a single effective level for each quantumdots and by taking the effects of the leads continuum levels intoaccount which are show within the wide band gap approximationto produce an imaginary quantity add to the energy levels of thequantum dots, representing the broadening in each effectivelevels.The related basic equation of motion for all the correspondinglevels eigen function probability amplitudes are solvedanalytically by using Laplace transform technique. We calculatethe occupation probability for the right lead, the instantaneouscurrent and the average instantaneous current that passes throughthe right lead.Our calculated results for the time - dependent dynamical electrontransfer offered a general features that takes into account thefollowing effects :  Energy levels position changes with respect to the leadFermi level. A suitable applied bais voltage on the right and left leads. Changes of the coupling amount among the quantum dots levels and in between them and the leads levels. Change of the leads temperatureThe characteristic of the time - dependent charge transport in the system are shown through the relation between the average instantaneous current passes the right lead and the applied baisvoltage, which we show as follow :  For the case of the scattering region arrangement that compose of two quantum dots it is an Ohmic behavior. For the case of the scattering region arrangement that compose of four quantum dots it is a non - linear (non - Ohmic) behavior.

قياس تركيز غاز الرادون والثورون في المنازل والمستشفيات والمراكز الصحية في محافظة البصرة العراق

Author name: حسام نجم عبود
Supervisor name: عيسى جاسم محمد الخليفة
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: Arabic
University location: Basrah
First pages:

دراسة تركيز البورون في مياه محافظة ذي قار وتربتها باستخدام طريقة الكارمين وجهاز اللوفي بوند == Study of Boron Concentration in Water of Thi - Qar Governorate and Soil Using Carmine Method and Lovibond Device

Author name: تغريد عبد الحسين شاكر
Supervisor name: ثائر منشد سلمان
General topic: Physics
Specific topic: Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: In this study , we measured the boron concentration in the water and soil of Thi - Qar Governorates, where were collected (45) Sample Water also were collected (66) Sample soil from the districts of Thi - Qar and its environs province of southern Iraq , and we used that analogy chromatography Al carmine method (colorimetric carmine method) . we got the highest concentration of boron (0.801 ppm) in Garmat Bani Said area - Al Greej and the lowest value for the concentration of boron measured Al carmine manner of samples of clay in said Dhkeel - Al Ibrahim (2) area (0.368 ppm) . The concentration of boron has been in samples of mud rate in the province of Thi Qar was (0.614 ppm) also were measured exponent pH and ranged results between (7.208 - 8.368 ) and an average of (7.890) . As well as we used measurement chromatography Al carmine to measure the boron concentration in water samples way . We got the highest value for the concentration of boron water sample (1.057 mg / L) in Garmat Bani Said area - center (1) and the lowestvalue for the concentration of boron measured Al carmine way in water samples in Al Fuhood zone - Amayreh(1) (0.251 mg / L) . Boron concentration of water samples in the province of Thi Qar rat was (0.592 mg / L) .The boron concentration of water samples located within the normal allowable ratio globally but some are relatively high . As well as the measured pH and the results were pH ranging between (7.435 - 8.277) and an overall average of (7.885) .It was also some water samples to measure the soil by a device (Spectro Direct Lovibond) we got the highest value for the concentration of boron in the water samples (1.4 mg / L) in Al Fuhood zone - Amayreh area (3) , and the lowest value for the concentration of boron in Al Nasiriya - Al shuhada zone (1) (0.4 mg / L) . The soil samples were measured by a device (Spectro Direct Lovibond) has the highest value for the concentration of boron we got them in Al Tar - Al hareb area (1.1 ppm) and the lowest value for the concentration of boron in Al Tar - Al Ebrat (0.2 ppm) .

دور تذبذب الجسر في نقل الالكترون خلال نظام مانح - جسر - قابل == THE ROLE OF BRIDGE VIBRATION ON ELECTRON TRANSFER THROUGH DONOR - BRIDGE - ACCEPTOR SYSTEMS

Author name: بهاء علي طالب
Supervisor name: شاكر ابراهيم عيسى
General topic: Physics
Specific topic: Electronics Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: موضوع الرسالة هو دراسة تاثير اهتزاز الجسر وتكوين البولارون الصغير على عملية انتقال الشحنة بين المانح والقابل في الانظمة الجسرية الجزيئية. ولهذا الغرض تعاملنا مع اقتران الكترون - فونون قوي. واستخدمنا لهذا الغرض معادلات الحركة لسعات الدوال الكمية للنظام الجسري مع معادلة نمط الاهتزاز الديناميكي الكلاسيكي للجسر. بخصوص التعامل مع تقريب الحالة المستقرة والتقريب الساكن تم اعطاء صيغة لحساب طاقة البولارون وتقدير تاثيرها على عملية انتقال الشحنة الديناميكية بين المانح والقابل وبارامترات النظام التي تؤثر فيها. اذ لاحظنا ان الصفة العامة في منحنيات احتماليات الملء يكون اعتمادها على طاقة الجسر المؤثرة |∆(u)| اذ بزيادتها تقل احتمالية ملء مستوى الجسر ويقل عدد التذبذبات. ان وصفنا عملية منح البولارون بواسطة نظرية البولارون الصغير طورت لوصف الترابط القوي بين الالكترون والاهتزاز ضمن مفهوم البولارون الصغير، اي ان كل جسر يمكن ان يتذبذب (شبه) غير معتمد على تذبذب جيرانه من الجسور، او كل موقع جزيئي يتذبذب غير معتمد على تذبذب موقع جزيئي اخر. فضلنا المعالجة العددية في حل المعادلات والابتعاد عن الحل المستقر وتم حل معادلة النمط الاهتزاز الكلاسيكي حلا تحليليا بحيث يكون تاثير ترابط الكترون - فونون واضحا من خلال جعل مستوى طاقة الجسر معتمد على الزمن ويكون مسيطرا على احتمالية ملء مستوى الجسر. كما ان تاثير مستويات الطاقة المستمرة للقطبين المعدنيين على كل من مستويي المانح والقابل قد اخذ بنظر الاعتبار. وكان واضحا ان احتماليات ملء المستويات تضمحل بمرور الزمن وتتضاءل سعات التذبذب في المنحنيات، وان احتمالية ملء مستوى القابل هي الاكثر تاثرا بزيادة التعريض في المستويات. وايضا لاحظنا ارتباط تصرف احتمالية ملء مستوي الجسر مع تصرف احتمالية ملء مستوى المانح وذلك لان مستوى المانح هو مصدر الالكترون لتكوين البولارون مع الجسر.V وطبقت الصيغ الرياضية على عملية انتقال الشحنة خلال جزيئة الـ DNA. اذ تعاملنا مع نظام جسري ذي جزيئة اساس واحدة ونظام جسري ذي جزيئتين من الجزيئات المتسلسلة خطيا من جزيئات الحامض النووي الـDNA. اذ لاحظنا وجود اختلاف بسيط في احتماليات ملء المستويات بوجود القاعدة G/C او القاعدة T/A، او بوجود قاعدتين جزيئيتين، اذ لاحظنا ان التصرف الهام في منحنى احتماليات الملء هو عند زيادة ترابط الكترون - فونون نلاحظ تاثير تصرف منحنى احتمالية ملء مستوى مصدر الالكترون (المانح) على تصرف منحنى احتمالية ملء مستوى الجسر الاول (القاعدة الجزيئية الاولى) التي تكون على ترابط مع المانح وذلك لحدوث تشكيل البولارون الاول. بينما يكون تصرف منحنى احتمالية ملء مستوى الجسر الثاني مع تلك للجسر الاول غير متطابق بالتصرف وذلك بسبب ضعف اصرة الترابط بينهما. ويكون تصرف احتمالية ملء القاعدة الجزيئية الثانية مترابطا مع تصرف منحنى احتمالية ملء مستوي القابل وذلك لشدة الاصرة بين مستوياتهما. | The subject of thesis is the effect of bridge vibration and small polaron formation on the electron transfer (ET) in D - B - A system. For this purpose, we dealt with strong electron - phonon coupling. And we used for this purpose the equations of motion for quantum amplitudes and the equation of classical - dynamical vibration mode of the bridge system. For the case of steady state approximation and static approximation we gave a formula to calculate the polaron energy and estimate its effect on the dynamical ET between the donor and accepter and the parameters involved. where we note that the general feature of the occupation probability curves are depend on the bridge effective energy |∆(u)|, when it increases, the occupation probability and the number of vibration decreases. The description of polaron hopping by the theory of small polaron was developed to describe the strong coupling between the electron and vibration within the concept of small polaron, i.e. every bridge vibrates (semi) independently from neighboring bridges. we preferred the numerical treatment in solving the equations and get away from the static solution, we solved the equation of classical - vibrational mode analytically such that the effect of electron - phonon coupling became obvious by putting the bridge state in a time - dependent form, and controlling the occupation probabilities of the bridge. The effects of the continuous energy levels of the metlic electrodes on the donor and acceptor states is taken into account. And it was obvious that the occupation probabilities of levels vanish in time and so as the amplitudes of vibration, and the most obvious effect of continuous levels of electrodes is on acceptor state, also we note that the behavior of the bridge state occupation probability is related with the occupation probability behavior of the donor state, since the donor state is the source of electron for polaron formation in bridge site.We applied the mathematical formulae on charge transfer through DNA molecule. Where we dealt with bridge system as a single base molecule or two liner consecutive molecules bases of DNA molecules. Where we note there is a small difference in occupation probabilities of G/C base or T/A base or between that of two bases. The important feature in occupation probabilities curves is that when electron - phonon coupling increases, we note that the effect of the occupation probability behavior curve for donor state on the occupation probability behavior curve of the first bridge which is connected with the donor because of the formation of the first polaron, while the behavior of the occupation probability of the second bridge and that of the first bridge is not coincide because of the weak interaction between them, but the occupation probability behavior of the second bridge state is related with that of the acceptor because of the strong interaction between them

دراسة نظرية لبعض العوامل المؤثرة في سلوك دالة الموجة المستخدمة في تكثيف بوز اينشتاين

Author name: ايمان عبد الرضا موحي المالكي
Supervisor name: نوري حسين نور الهاشمي
General topic: Physics
Specific topic: Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: This study entails some of the theoretical characteristics of Bose - Einstein intensification of the ideal gas properties, since the wave function behavior has been studied and analysed according to the effect three types of external potentials trapping that are used in the production Bose - Einstein condensation which are (harmonic potential, optical lattice potential , and double well potential) that have been used as individual or overlapping potentials, and the value of the non - linear has been confirmed according to fixed values in the whole study in order to the study the effect of the other elements. The effect anisotropy AL has been studied according to the behavior of the wave function and the distribution potential where the harmonic potential has individually at first, than it has been overlapped with the optical lattice potential in order to study this factor. Furthermore,the effect of this factor has been explained due to the distribution potential, function wave and relation type between the factor itself, chemical potential and energy. Additionally, we have used the intertwined harmonic potential with the optical lattice to study the effect of optical lattice potential factor q after confirming the harmonic potential AL at certain values, with exposition of it's effect the wave function behavior and distribution of potential with explanation to the nature of the relation between the chemical potential and energy with this factor. In addition to that, we have studied the influence of the center of double well potential coefficient A on the nature and behavior of the wave function and potential, and the nature of the relationship between this factor and chemical potential and energy. Noting the effect of these factors on the behavior of the wave function and the distribution of potential, therefore it has effect in Bose - Einstein condensation production.

خصائص نقل الالكترون لكيوبت مقترن بترانزستور الالكترون المفرد == The Electron Transport Properties of Qubit Coupled with SET

Author name: ايات طاهر ابراهيم
Supervisor name: جنان مجيد المخ
General topic: Physics
Specific topic: Electronics Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:
Abstract: In this work, the dynamics of electron transport through a system consists of qubit (two coupled quantum dots) electrostatically coupled with single - electron transistor (quantum dot coupled to leads). The time - dependent Hamiltonian, that is used to describe the system energy, includes the electrostatic coupling between the qubit and the single - electron transistor. The time - dependent equations of motion for all the creation and annihilation operators are expressed in Heisenberg representation to derive the differential equations of motion for the quantum dots occupation numbers of the qubit and the single electron transistor, the related equations of motion for the correlation functions and also the formula that calculates the current which tunnels from the left lead to the single - electron transistor quantum dot. The system of equations of motion are treated by using the wide band approximation, and are solved numerically by using six order Runge - Kutta method, where the error is calculated at each step of time. By getting use of the system of differential equations solutions, the qubit and the single - electron transistor quantum dots occupation numbers are calculated as a function of time, in addition to the current that tunnels from the left lead to the single electron transistor quantum dot as a function of time.The main goal of this study in to investigate the effect of the parameters that related to the qubit and the single - electron transistor and their role in determing the electron transport process features through the whole system. These parameters, that are related to the initialization, manipulation and measurement processes, are the qubit and the single electron transistor quantum dots energy levels, the coupling strength between the qubit quantum dots, the electrostatic coupling between thequbit and the single electron transistor in addition to the coupling strength between the single - electron transistor quantum dot and the leads as well as the leads properties such as tempreture and band width. The effects of quantum dots energy levels tuning and the symmetry of the coupling with leads on the electron transport through the system are also investigated.Our study highlights four important physical features that related to the initialization, manipulation and measurement processes, these are : 1. The occupation numbers of the quantum dots of the qubit and the single electron transistor and the current of SET at the final time of measurement.2. The charge accumulation on the qubit quantum dots, at the final time of measurement, on the far - removed quantum dot and the nearest one to the single - electron transistor, that can be controlled by appling bias voltage and gate voltage.3. The determination of the time - current dependence if it follows the dependence of the far - removed or the nearest qubit quantum dot occupation number on time.4. The role of qubit energy levels tunning and the asymmetric coupling with the leads in determining the suitable initialization and manipulation processes get the quantum measurement with high quantum efficiency.

اللااستقراريات والفوضى في الدوائر الالكترونية

Author name: ابو طالب يوسف عباس عبد الكريم الشامي
Supervisor name: نوري حسين نور الهاشمي | فرات احمد مهدي السيمري
General topic: Physics
Specific topic: Electronics Physics
Degree: Master
Language: Arabic
University location: Basrah
First pages:

الاتصالات الفوضوية في ليزر شبه الموصل النقطي الكمي باستخدام التغذية العكسية البصرية == Chaotic Communication of Quantum Dot Semiconductor Laser with Optical Feedback

Author name: افراح ياس حمدان الدليمي
Supervisor name: باسم عبد اللطيف غالب
General topic: Physics
Degree: Master
Language: Arabic
University location: Babylon
First pages:
Abstract: يعتبر ليزر شبه الموصل النقطي الكمي البداية الجديدة في تطورات الليزر , وليزر مهم من ليزرات النانوتكنولوجي لتطبيقه واستخدامه في المجالات الطبية والصناعية اضافة لتطبيقه في مجال الاتصالات . تتضمن الرسالة الحالية دراسة الفوضى في الاتصالات عن طريق نمذجة معادلات المعدل ودراسة ديناميكية ليزر شبه الموصل النقطي الكمي . تعتمد ديناميكية ليزر شبه الموصل النقطي الكمي على عدة عوامل منهزامن التاخير الذي من خلاله تمكنا من دراسة طول التجويف الخارجي القصير والطويل بوجود التغذية العكسية وبالاعتماد على النتائج العملية. تم تحديد قيم طول التجويف الخارجي القصير والطويل حسب اهميتها في التطبيقات العملية ومنها الاتصالات عند تغير عامل تعزيز عرض الخط .اضافة الى تحديد الحالات المستقرة والدورية وشبه الدورية والحالات الفوضوية وامكانية حصول الفوضى شبه المستقرة .تمت دراسة منظومة اتصالات لليزرين من ليزرات اشباه الموصلات النقطية الكمية تتكون من ليزر شبه الموصل النقطي الكمي المرسل وليزر شبه الموصل النقطي الكمي المستقبل وامكانية التزامن بينهما ودراسة علاقة كثافة الفوتونات واحتمالية الملئ لحاملات الشحنة مع عدد حاملات الشحنة لكل من الليزرين , اضافة لدراسة تضمين خرج الليزر باشارة مضمنه ومحاولة فكها بعد استلامها من الليزر المستقبل . هذه الدراسة تمت بحل معادلات المعدل للنظام المستخدم بطريقة رنج - كتا للمرتبة الثانية المسماة (dde23) باستخدام برنامج MAThLAB .

دراسة انتقال طاقة الفلورة داخل جزيئات الوسط الفعال الليزري == Study of fluorescence energy transfer in laser active medium molecules

Author name: نورة عزيز عليوي
Supervisor name: لازم حسن عبود
General topic: Physics
Degree: Master
Language: Arabic
University location: Babylon
First pages:
Abstract: في هذا البحث تم دراسة ظاهرة انتقال طاقة الفلورة بين الصبغات الليزرية والتي تتحقق هذه الظاهرة بتساوي طاقة طيف الامتصاص لاحدى الصبغتين مع طاقة طيف الانبعاث (الفلورة) للصبغة الثانية في الحالة المثالية لحصول الانتقال, وهنا تسمى الصبغة الاولى بالجزيئة القابلة والصبغة الثانية بالجزيئة المانحة.وقد تم تحضير انموذجين في هذا البحث,الاول للصبغة القابلة وهي (الاكردين اورنج Acridin orang) مع الصبغة المانحة وهي (البوب بوب Popop ) والانموذج الاخر كانت فيه الصبغة القابلة (الاكريفلافين Acriflavin) والمانحة هي (البوب بوب).وعند قياس طيفي الامتصاص والفلورة لكلا الانموذجين تحقق التداخل الكبير بينهما وهذا يؤكد تحقق حصول نموذج (القابل - المانح).وقبل البدا بالخلط تم دراسة اطياف الامتصاص والفلورة وكذلك الخواص البصرية الخطية لجميع الصبغات المستخدمة على انفراد وبتراكيز مختلفة , وهي (0.5x10 - 3,0.5x10 - 4,1x10 - 5, 1x10 - 6)ML, وبينت النتائج تغير الطول الموجي لجميع الصبغات مع تغير التركيز وحصول زحف نحو الازرق مع زيادته ونقصان كل من معاملي الامتصاص والانكسار في التراكيز الواطئة ,مع ملاحظة زيادة الكفاءة الكمية ونقصان العمر الزمني لمستوي طاقة الفلورة مع نقصان التركيز.وبعد تحضير انموذجي (القابل - المانح) لصبغتي (الاكردين اورنج + البوب بوب)و(الاكريفلافين +البوب) وبالتراكيز السابقة نفسها ,لاحظنزايادة شدة طيف الانبعاث (طيف الفلورة) حيث كانت اعلى قيمة ((46.48 عند التركيز ML(0.5x10 - 3) مقارنة مع قيمته (9.28) عند نفس التركيز للصبغة القابلة قبل الخلط للانموذج(الاكردين اورنج + البوب بوب)و كانت شدة طيف الانبعاث (الفلورة) عند اعلى قيمة (39.85) بالتركيز (0.5x10 - 3) Ml مقارنة مع قيمتها للصبغة القابلة قبل الخلط والتي كانت (9.15) لنفس التركيز.وقد حصلت ظاهرة الانتي ستوكس (anti - Stokes ) في انموذج (الاكردين + البوب بوب )مقارنة مع حصول ظاهرة ستوكس (Stokes ) قبل الخلط لكلا الصبغتين.اما في انموذج (الاكريفلافين + البوب بوب) فقد حصلت ظاهرة الستوكس (Stokes)وهذا مطابق مع حصول الظاهرة للصبغتين على انفراد.وبعد تحضير انموذجي الخلط لاحظنا تغير جميع الخواص البصرية الخطية (معاملي الامتصاص والانكسار الخطيين, زمن عمر مستوي الفلورة , النتاج الكمي ) عما كانت عليه قبل الخلط للصبغات على انفراد. | In this research was the study of the phenomenon of fluorescence energy transfer between some laser dyes. To get the energy transition process must equal absorption energy spectrum of the first dye (accepter molecule) with florescence energy spectrum for the second dye (donor molecule). Two models have been prepared in this study , the first of the accepter dye (acridine Orange ) with the donor dye (popop), and was second between the accepter dye (acriflavin) with the donor dye (popop) . When measuring the absorption spectrum and the fluorescence spectrum of accepter dyes and donor dye check is considerable overlap between them and this confirms the check model (accepter + donor ). Before starting mixing was studies absorption and fluorescence spectra as well as optical linear properties for all dyes used individually at different concentrations (0.5 x 10 - 3 ,0.5 x 10 - 4 ,1 x 10 - 5 ,1 x 10 - 6)Ml . The results showed change the wavelength of all dyes with change of dye solution concentration .Blue shift has happened with decreasing concentration and decreases both linear absorption and refraction coefficients with decreasing concentration. The study recorded a decrease in quantum yield and increase the lifetime of the energy level of fluorescence with an increased concentration. After preparation of samples (accepter + donor ) to (acridin Ornge and popop ) and concentration mentioned. we have noticed an increase intensity of emission spectrum (fluorescence spectrum), where the highest value (46.48) at the concentration (0.5 x 10 - 3) compared with the value (9.28) at the concentration before mixing. And got the same result after preparation of samples (accepter + donor ) to ( acriflavine and popop ) and concentration mentioned, we have noticed an increase intensity of emission spectrum ( fluorescence spectrum ), where the highest value ( 39.85 ) at the concentration (0.5 x 10 - 3 ) compared with the value (9.15 ) at the same concentration before mixing. It has got anti - Stokes phenomenon in the samples of (acridine Orange and popop ) compared to got stokes phenomenon for two dyes before mixing. In the samples of (acriflavin and popop), Stokes phenomenon has got , this is identical to the one who happened to two dyes before mixing.We note change all the linear optical properties (absorption coefficient , refraction coefficient, quantum yield, lifetime of the energy level of fluorescence) of all samples (accepter + donor) prepared compared to what it was before mixing

استخدام المطاط المعاد في تحضير عجنات مطاطية تستعمل كاغطية مانعة للرطوبة == USING RECLAIMED RUBBER FOR PREPARING RUBBER BATECHES APPLIED AS ANTIWETNESS COVERS

Author name: احمد محي حمود جواد عجام
Supervisor name: سمير حسن هادي النصراوي | محمد حمزة دحام المعموري
General topic: Physics
Specific topic: Physics
Degree: Master
Language: Arabic
University location: Babylon
First pages:
Abstract: تناولت هذه الدراسة تحضير عجنة مطاطية متراكبة لكي يتم استخدامها في تصنيع اغطية عازلة للرطوبة, وقد تم ٳجراء هذه الدراسة بعدة محاور. اولا تم اختيار مطاط الستايرين - بيوتادايين (SBR) كمادة اساسية واضيف ٳليها المطاط معاد الحيوية (Reclaim Rubber) بنسب مختلفة pphr (0, 50, 100, 150, 200, 250) بالاضافة الى المواد المفلكنة والمعجلة والمنشطة لعملية الفلكنة, وتم تحضير العينات باستعمال قوالب ذات ابعاد خاصة وحسب المواصفات العالمية للفحص (ASTM) وباستخدام المكبس الحراري تحت ضغط 10MPa ودرجة حرارة 145°C ثم تم دراسة بعض الخواص الميكانيكية للعينات مثل خاصية الشد, الاستطالة, معامل المرونة, مقاومة التمزق, الصلادة, التشوه بالانضغاط, الوزن النوعي, البلى الاحتكاك وخاصية امتصاصية الماء. من خلال اجراء الاختبارات وجد ان خواص قوة الشد والاستطالة ومقاومة التمزق والوزن النوعي وامتصاصية الماء, تزداد مع زيادة نسبة المطاط معاد الحيوية وينخفض كل من معامل المرونة والصلادة والبلى الاحتكاكي وبعد ذلك تم اختيار العجنات التي تمتلك افضل خواص ميكانيكية وهي العجنة B5 التي تتكون من pphr(100SBR+200R.R) والعجنة B6 التي تتكون من pphr(100SBR+250R.R). ثانيا تم ٳضافة الياف الصوف وهي عبارة عن مخلفات صناعية ونواتج عرضية للصناعات النسيجية الملوثة للبيئة وكذلك الياف النايلون وهي عبارة عن نفايات لمواد بلاستيكية ملوثة للبيئة وبنسب pphr (0, 10, 20, 30, 40, 50) الى العجنتين B5, B6 فاصبحت كل عجنة تمتلك ست عينات مدعمة بالياف الصوف وست عينات مدعمة بالياف النايلون وتم تحضير العينات ودراسة تاثير ٳضافة الالياف على الخواص الميكانيكية للعجنة المطاطية. بعد مقارنة النتائج مع المواصفات القياسية, تم اختيار العجنة التي تتكون من (100SBR+200R.R+30Nylon.F) pphr حيث تمتلك استطالة (463%) ومقاومة تمزق (2.863MPa) وامتصاصية الماء (0.67%) بالرغم من قوة الشد لها (2.982MPa). ان اضافة الالياف بنوعيها الى العجنة المطاطية سببت انخفاض في قوة الشد من (3.846MPa) الى (2.982MPa) والاستطالة من (599%) الى (463%) وارتفاع في مقاومة التمزق من (1.45MPa) الى (2.86MPa) ومعامل المرونة من (0.067MPa) الى (0.075MPa) والصلادة من (46.83) الى (74.66) ومقاومة البلى الاحتكاكي من (0.046%) الى (0.528%) وانخفاض التشوه بالانضغاط من (9.09%) الى (4.77%) والوزن النوعي من (1.06g/cm3) الى (0.9g/cm3) وهذه النتائج تتلاءم مع المواصفات المطلوبة للمنتج, ولتحسين خاصية الشد تم اخذ 150g من العجنة التي تم اختيارها واضيف لها 50g من مادة اسود الكاربون وبعد اجراء فحص الخواص للعينة الناتجة تم الحصول على قوة شد بمقدار (5.16MPa) بالاضافة الى زيادة التحسن في الخواص الميكانيكية الاخرى. لمعرفة مدى التاثير الذي تحدثه الاشعة فوق البنفسجية (UV) على خواص المنتج تم تعريض عينات الاختبار الى الاشعة فوق البنفسجية UV ولفترات زمنية مختلفة (0, 15, 30, 45, 60) hour وللخواص التالية : مقاومة الشد والاستطالة ومقاومة التمزق والصلادة والوزن النوعي وامتصاصية الماء. فاظهرت النتائج حدوث انخفاض في مقاومة الشد بنسبة 6.39% والاستطالة بنسبة 7.81% ومقاومة التمزق بنسبة 10.78% والوزن النوعي بنسبة 1.53% وزيادة في قيمة الصلادة بنسبة 2.48% وامتصاصية الماء بنسبة 56.49% وهذه التغيرات تكون ضمن حدود المواصفات القياسية المعتمد عليها. تم اجراء اختبار التعجيل بالتعتيق الحراري لعينات الشد ومقاومة التمزق وامتصاصية الماء تحت درجة حرارة 70°C ولمدة 28 يوما فاظهرت النتائج حدوث زيادة طفيفة في قيمة مقاومة الشد (5.417MPa) ومقاومة التمزق (3.2Mpa) وامتصاصية الماء (0.793%) وانخفاض طفيف في قيمة الاستطالة (302%). | This study comprise the preparation of composite rubber batch to be used in the manufacture of insulation covers moisture and has been nominated by conducting this study with several axes. First was selected basic feed stock styrene - butadiene rubber (SBR) in addition to the Reclaim rubber and at different rates (0, 50, 100, 150, 200, 250) pphr in addition to the vulcanizing material and accelerators and activators to vulcanization process. The samples prepared by using the private dimensions of molds and according to international standards for testing (ASTM) and using a thermal piston under the compression 10MPa and temperature 145°C then some mechanical properties was studied for samples such as tensile properties, elongation, modulus of elasticity, tear resistance, hardness, deformation Compression, specific gravity, friction and property absorbency water. Through testing it found that The increasing of additives ratios of reclaim rubber due to increase the tensile strength and elongation and tear resistance and specific weight and absorbency of water, and decreases both the elastic modulus and hardness and friction. After that was chosen the samples which owns the best mechanical properties of a B5 sample consisting of (100SBR+200R.R) and B6 sample, which consists of (100SBR+250R.R). Second it has been added wool fabrics which is a waste, and outputs cross textile industries and nylon fabrics which is a waste plastics, at different rates (0,10,20,30,40,50) pphr to samples B5, B6, becoming a whole batch has six samples reinforced wool fibers and six samples reinforced nylon fibers was prepared samples and study the effect of adding fiber on the mechanical properties of rubber batch. After comparing the results with standard specifications, has been chosen the sample which consisting of (100SBR + 200R.R + 30Nylon.F), It has a tensile strength elongation (463%) and resistance to tearing (2.863MPa) and water absorbency (0.07%), exception the tensile strength (2.982MPa). The addition of fiber to both types of batchs rubber caused a decrease in the tensile strength of (3.846MPa) to (2.982MPa) and elongation of (599%) to (463%) and increase in the tear resistance of (1.45MPa) to (2.86MPa) and elastic modulus of (0.067Mpa) to (0.075MPa) and the hardness of (46.83) to (74.66) and wear resistance of (0.046%) to (0.528%) and low deformation by compression of (9.09%) to (4.77%) and spesific gravity of (1.06g/cm3) to (0.9g/cm3), and these results fit with the required product specifications, and to improve the tensile properties were taken 150g of selected sample and add them 50g of carbon black material and after an examination of properties of the sample resulting been get the tensile strength by (5.16MPa) in addition to the increased improvement in other properties. To find out the extent of the impact of ultraviolet radiation (UV) on the properties of the product have been exposing the test samples to UV radiation and for different periods of time (0,15,30 ,45,60) for properties : the tensile strength, elongation, tear resistance, hardness, specific weight and absorbency of water. The results indicate a reduction in tensile strength 6.39% and the elongation of 7.81% and tear resistance of 10.78% and specific weight of 1.53% and increase in the value of hardness at 0.024% and absorbency of water of 4.8%, and these changes are within the limits of the standard specifications. Was conducted testing of heat aging to tensile strength and tear resistance and absorbency of water samples under a temperature of 70°C for a period of 28 days, The results indicate to increase in tensile value by (0.04%) and tear resistance by (0.04%) and decreasing in elongation value of (0.01%).

دراسة لتحويل شعاع الليزر المنقول عبر الفضاء الحر الى طاقة كهربائية باستخدام الخلايا الشمسية == A Study on Transforming The Laser Beam Transmitted Through Free Space into Electrical Energy Using Solar Cells

Author name: امجد زهير ناجي كاظم
Supervisor name: جاسم محمد جاسم حسوني | قصي محمد سلمان
General topic: Physics
Degree: Master
Language: Arabic
University location: Babylon
First pages:
Abstract: في هذا البحث تم توصيف منظومات نقل الطاقة الكهربائية لاسلكيا وتم تصنيفها حسب المسافة المراد نقل الطاقة اليها والمقارنة ما بينهما وقد لاحظنا ان لكل طريقة ميزاتها الخاصة التي تجعل منها مفيدة ولا يمكن الحكم بالمطلق بافضلية طريقة عن اخرى , كما تم بناء منظومة مختبرية لنقل الطاقة عن طريق استخدام شعاع الليزر وتتكون من المرسل وهو عبارة عن الليزر والمستقبل الضوئي حيث وقع الاختيار على الخلية الشمسية وكذلك تم بناء خلية اختبار لتوليد بخار الماء لمعرفة تاثيره على قيمة الطاقة المنقولة عبر الفضاء الخارجي .ولايجاد افضل طول موجي لشعاع الليزر ينقل عبر الفضاء ولايعاني من فقدان في القدرة , تم اختيار انواع مختلفة من الاطوال الموجية من الليزرات واستخدمت ليزرات ذات اطوال موجية (473,532,650nm) ولاختبار افضل مستلم ضوئي تم اختيار انواع عديدة من الخلايا الشمسية لمعرفة الاستجابة الطيفية لها ومعلمات خرجها مثل (FF, ɳ,VOC,ISC Imax,Vmax,Pmax) حيث وجدنا شعاع الليزر ذات الطول الموجي (650nm) يتمكن من نقل اعظم قدرة مقارنة بالاطوال الموجية الاخرى وصلت الى (7mw) عندما كانت شدة الارسال (70 w/m2) وقد تم اجراء العديد من الاختبارات على المنظومة المختبرية حيث تم تحويل القدرة المنقولة عبر الفضاء الى قدرة ضوئية بشكل مباشر وذلك عن طريق تشغيل ثنائي باعث للدايود (LED) ذات اللون الاحمر , وقد تبين الاختبار ان قدرة الضوئية التي تنبعث من (LED) كانت (260 mW),وكما تم اختبار قدرة المنظومة على خزن القدرة الكهربائية داخل بطارية قابلة للشحن وقد تبين في الاختبار ان القدرة المنقولة باستخدام ليزر ذات طول موجي (650nm) تمكن من شحن البطارية بجهد (1.2v) باقصر زمن من الاطوال الموجية (473,532 nm) .ولمعرفة تاثير بخار المار على القدرة الكهربائية المنقولة عبر الفضاء تم اختبار حزمة الليزر ذات الاطوال الموجية (473,532,650 nm) ولمستويات مختلفة من شدة بخار المار المتولدة عبر خلية الاختبار المصنعة حيث وجدنا ان الطول الموجي (532nm) يمتلك اعلى نفاذية عند مروره داخل الخلية مقارنة ببقية الاطوال الموجية (473,650nm) | In this work a theoretical proposal and a laboratory simulation for a system that may be implemented to transfer the solar electrical power via a laser beam for a space station (as a solar laser source) to an earth solar station (as a receiver),Different systems are manifested, with their advantages and disadvantages , are covered in this work . The simulation system three lasers of different wavelengths (473,532,650)nm are selected as transmitter sources ,because they cover the maximum radiant emittance of the sun .While different solar cell are used and their parameters (FF, ɳ,VOC,ISC Imax,Vmax,Pmax) are investigated practically to select their optimum receiving system .The effect of the water vapor (which represent the main attenuation factor of the atmosphere constituents the propagation medium for the laser beam in the visible band in the solar spectrum) is also investigated practically .The results show that the (650nm) laser wavelength is more efficient than the other two sources in transferring the solar power, while the (532nm) wavelength source has the lowest attenuation in the water vapor . It is found the highest permeability , When passing through the cell , compared to the other two wavelengths (473,650nm

تحضير وتوصيف نظام لب - قشرة لجسيمات (فضة - ذهب) النانوية باستخدام القشط الليزري == Preparation and Characterization of (Core - Shell) System Nanoparticles by laser Ablation

Author name: زهراء ليث ابراهيم خليل
Supervisor name: غالب عبد الوهاب الدهش | وجيهة عبد الدائم زوبع
General topic: Physics
Degree: Master
Language: Arabic
University location: Babylon
First pages:

تاثير اضافة (CdS) على الخصائص البصرية لخليط PVA - PEG == Effect of (CdS) additive on Optical Properties of ( PVA - PEG) blend

Author name: مهند عبد السلام حسين موسى الطائي
Supervisor name: خالد حنين عباس
General topic: Physics
Degree: Higher Diploma
Language: Arabic
University location: Babylon
First pages:
Abstract: حضرت المتراكبات البوليمرية (PVA - PEG - CdS) باضافة كبريتيد الكادميوم (CdS) بتراكيز وزنيه مختلفة wt.% (0,2,4) الى خليط بولي فاينيل الكحول وبولي اثيلين كلايكول باستخدام طريقة الصب. حيث تم دراسة تاثير اضافة كبريتيد الكادميوم على الخصائص البصرية لخليط بولي فاينيل الكحول وبولي اثيلين كلايكول وتم تسجيل طيف الامتصاصية بطول موجي (1100 - 200) نانومتر وحساب كل من النفاذية ومعامل الامتصاص وفجوة الطاقة ومعامل الخمود ومعامل الانكسار وثابت العزل (الحقيقي والخيالي) والتوصيلية البصرية .اظهرت النتائج بان النفاذية وفجوة الطاقة تقلان بزيادة تركيز (CdS),وزيادة كل من معامل الامتصاص, معامل الخمود, معامل الانكسار, ثابت العزل (الحقيقي والخيالي) بزيادة تركيز المضاف | In this study, the (PVA - PEG - CdS) polymeric composite have been prepared by adding Cadmium sulphide (CdS) to the mixture of the poly vinyl alcohol (PVA) and poly ethylene glycol (PEG) with different weight percentages (0 , 2 and 4 ) wt.% by using casting method optical properties have been studied .The results of the study of the effect of adding CdS on The effect of addition CdS on the optical properties of the mixture of the PVA and PEG have been studied. The absorbance has been recorded in the wavelength (220 - 1200) nm, also transmittance ,the absorption coefficient, energy gap, extinction coefficient , refractive index and dielectric constant (real , imaginary) have been determined. Results showed that transmittance and the energy gap decrease with increasing of CdS concentration, also absorption coefficient, extinction coefficient, refractive index and dielectric constant (real, imaginary) all of these increase with increasing of CdS concentration

تحديد تراكيز غاز الرادون في منطقه مختاره من محافظة بابل باستخدام كاشف الرادون الالكتروني Rad7 == Determination of Radon Concentrations in some Selected Locations Province(Babil Governorate) using electronic radon detector Rad7

Author name: مريم عادل جاسم محمد
Supervisor name: خالد صالح جاسم
General topic: Physics
Degree: Higher Diploma
Language: Arabic
University location: Babylon
First pages:
Abstract: الرادون من الغازات الخاملة كيميائيا والمشعة طبيعيا ينتج من الانحلال الاشعاعي الطبيعي لليورانيوم الموجود في الصخور والتربة. ينبعث الرادون بسهولة من التربة لينتشر في الهواء حيث ينحل الى مشتقات قصيرة العمر تدعى وليداة الرادون ببعثه جسيمات الفا والتصاقها بالغبار والجسيمات الاخرى العالقة في الهواء وعند استنشاق الهواء تتراكم تلك الوليدات في الخلايا التي تغطي القصبات الهوائية حيث يمكن لجسيمات الفا الحاق اضرار لتلك الخلايا واحداث سرطان الرئة . تناولت هذه الدراسة قياس تراكيز غاز الرادون في ماء الشرب منطقة الدراسة في مدينة الحلة مركز محافظة بابل . اخذنا الماء المستخدم في المنازل بواقع 22 عينة من اماكن مختلفة من منطقة الثيلة. ولقياس تركيز غاز الرادون من منازل مختلفة في منطقة الثيلة وذلك باستخدام كاشف الرادون الالكتروني RAD7 , وكان معدل تركيز غاز الرادون في عينات الماء الصالح للشرب Bq.L - 1 0.093 وكانت اعلى قيمة 1Bq.L - 0.49 وادنى قيمة كانت 0)Bq.L - 1) وحسبت الجرعة الفعالة لتعرض الانسان لغاز الرادون 0. 219*10 - 5 mSv.y - 1 . وعليه وجد ان تراكيز غاز الرادون في الماء هي ضمن الحدود الطبيعية التي حددتها المنظمات المختصة(وكالة حماية البيئة الامريكية (EPA) )حيث ان الحد الاعلى المسموح به لتركيز غاز الرادون في الماء1Bq.L - 11 وفق ما حددته وكالة حماية البيئة. اختير موضوع الدراسة الحالية لاهمية الماء في حياة الانسان والكائنات الحية ، ولقلة الدراسات السابقة في منطقة الدراسة . | Radon from chemically inert gases and radioactive naturally produced from the natural radioactive decay of uranium found in rocks and soil. Emit radon easily from the soil to spread in the air where dissolved to derivatives, short - lived, called the daughter radon emission alpha particles and sticking with dust and other particles suspended in the air and when inhaled air accumulate those daughter in the cells that cover the bronchial tree where can alpha particles damage to those cells and cause lung cancer. This study measure radon concentrations in drinking water study area in the city of Hilla , Babylon Province Center. We took the water used in homes 22 samples from different parts of study region. To measure the radon concentration of different houses in study area using electronic radon detector RAD7, radon concentration rate in drinking water samples 0.093 and Bq.L - 1 were the highest value 0.49 Bq.L - 1and minimum value was(0) Bq.L - 1and calculated the effective dose for human exposure to the gas Rn 0. 219*10 - 5 mSv.y - 1 we were found that the concentrations of radon in the water is within normal limits set by the relevant organizations as the maximum allowable concentration of radon in water 11 Bq.L - 1 according to the Environmental Protection Agency(EPA) . Has been chosen this subject of the current study of the importance of water in human life and living, and the lack of previous studies in the study area.
1 ... 55 56 57 58 59 ... 91