Show: 25 50 75 100 Results

Search results: 75 out of 37,193

تحضير ودراسة المركبات SnxBa4Ca2Cux+4Oy وYnBa5Cun+5Oy == Preparation and Characterization of the SnxBa4Ca2Cux+4Oy and YnBa5Cun+5Oy Compounds

Author name: رؤى فخري هادي
Supervisor name: عماد خضير الشكرجي
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: The present study includes the preparation of SnxBa4Ca2Cux+4Oy and YnBa5Cun+5Oy compounds with (x = 3, 4, 5, 6, 7) and (n=3, 5, 7) by solid state reaction (SSR) method. The study was to conclude the superconductor behavior of both compounds. The prepared samples were analyzed by Meissner effect primary, and the excess oxygen content was measured by using Iodomertric titration method. The samples characterized by XRD patterns with computer program that was used to determine the value of lattice constant, Scanning Electron Microscope (SEM), Energy dispersive X - ray spectroscopy (EDS) to study the grain morphology and also resistivity measurement was performed by Van der Pauw method to conclude the nature of behavior.The resistivity measurement results of Sn - Ba - Ca - Cu - O system showed that the semiconducting behavior, increases with decreasing the temperature toward low temperature, the lowest and the highest normal resistivity were found at x=6 and at x=4, respectively. The system Y - Ba - Cu - O showed a superconductor behavior with high transition temperature, the Tc at n=3 of about (113.6 K), the sample prepared with n=5 has Tc=113 K, meanwhile the sample prepared with n=7 has Tc=105 K.The x - ray analyses for SnxBa4Ca2Cux+4Oy samples showed that the tetragonal structure, and the c - parameter increased by increasing the value of (x) until reach to maximum value at x=5 then return back decreasing at x=6 and 7. The x - ray diffraction analysis of the compound YnBa5Cun+5Oy has orthorhombic phase and when Y - atom concentration and the number of CuO2 layer increased tend to increase b and c - axis.The Scanning Electron Microscopy (SEM) results showed that the appearance of nanostructure in Sn6Ba4Ca2Cu10O22 and Sn7Ba4Ca2Cu11O24 samples in the range (100 - 300 nm), whereas the other samples of Sn - familywas a microstructure. On the other hand, the Y - 358 had large grains randomly comparable with Y - 5 5 10, Y - 7 5 12 addition to absent the interfaces distances from Y - 358. The results of EDS showed that the agreement of the peaks appeared with the theoretical values.

تحضير وتوصيف المادة الكهروحرارية ZnxBi2 - xTe3 == Preparation and Characterization of ZnxBi2 - xTe3 Thermoelectric Material

Author name: منال عبد الواحد عبود
Supervisor name: عماد خضير عباس | علي مطشر موسى
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: In this project we constructed a DC sputtering system for thepreparation of BiR2RTeR3R (Bismuth Telluride) thin films. BiR2RTeR3R and itsZnRxRBiR2 - xRTeR3R alloys which were prepared in this work by solid solutionas bulk samples and by D.C. sputter as thin film samples. Bothsamples are characterized by X - ray Diffraction Pattern (XRD) and byGrazing Incident Small Angle X - ray Scattering (GISAXS) for thinfilms that have small thickness less than 100 nm. Thin films sampleswere prepared under different deposition conditions (differentdeposition time, different pressure, different voltages and differentelectrodes distance). (XRD) and (GISAXS) results showed that theprepared BiR2RTeR3 Rwas polycrystalline and has high direction at (015)plane in 2????=27.37 ͦ while its alloys at (0015) in 2????=45.12 ͦ and theintensity of the peak increase by increasing Zn amount indicateincrease this plane density. For thin films the (XRD) results show thatthin film prepared under deposition conditions of (0.06 mbar, 900volt, 1 hour, 100 mA and 1cm electrodes spacing distance) areamorphous at thickness less than 200 nanometer and polycrystalline ifthe thickness increases more than 250 nm. A shift in planes presenceis due to the creation of (ZnTe) compound and increase in grain size.Atomic Force Microscopy (AFM) was used to estimate the average grain size of thin film prepared, results showed different average grain sizes depending on the system type and system parameters, also depending on the target composition. DC sputtering system showed lesser average diameter and high roughness that indicates DC sputtering system is suitable for long time deposition high efficiency TE thin film. To investigate the structure of samples Scan Electron Microscopy (SEM) was used and High Resolution Transmission Electron Microscopy (HRTEM) to evaluate the nano inclusion of solid solution.Thickness of some sample was examined by SEM technique where thicknesses of 23 nm, 46 nm and others are estimated. HRTEM Techniques are used to identify the shape of the low dimensions structure produced in the project. It is found that there are particles size with diameter rang about (66 - 107 nm) having uncontrolled shapes and size which were discovered in samples besides nano inclusions of Zn and ZnTe phase.Thermoelectric properties (Seebeck, power factor, conductivity and figure of merit) of all samples (bulk, thin films) were tested .The results show that the maximum Seebeck coefficient for Bi2Te3 as a bulk is (67.02 μV/K) at T=373 ͦ K while adding Zn enhance this value to (123.96 μV/K) at 363 for Zn0.1Bi1.9Te3 and (224.6 μV/K) for Zn0.2Bi1.8Te3 at 348 K and (189.6 μV/K) for Zn0.3Bi1.7Te3 at348 K. on other hand the thin films prepared have larger thermoelectric properties i.e. high seebeck coefficient, high power factor, high electrical conductivity and high figure of merit for all four alloys.

تصنيع وتوصيف مفتاح بلازما الومضة الكاذبة ذو القدرة العالية == Construction and Characterization of Pseudospark High Power Plasma Switch

Author name: بسمة حسين حمد الشمري
Supervisor name: احمد كمال احمد | كمال حسين لطيف
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:

محاكاة عامل تراكم الجرعة لاشعة كاما متضمنا تاثير اشعة الفناء للالمنيوم، والحديد والرصاص == Simulation of Dose Buildup Factor of Gamma Ray Including Annihilation Radiation for Aluminum, Iron and Lead

Author name: مروة صباح مهدي
Supervisor name: لؤي ادور جورج | ليث عبد العزيز العاني
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: A computer program based on Monte Carlo method had been designed and written in visual basic computer language and utilized for simulating the classic problem of gamma ray beam incident on finite plane slabs of absorbing materials. The source geometry adopted in this program is plane normal source.Dose buildup factor of gamma photons in the absence and presence pair production effect have been calculated in the energy range (4 - 10) MeV for aluminum, iron, and lead up to 5 mean free path thickness.Some of physical parameters has been studied and the simulation results indicates the following remarks : • Gamma ray buildup factor increases with the increase of the thickness for the three shielding materials, this increase in dose buildup factor is due to the increase of scattering with the small angles and with the increase of the thickness of the material.• Dose buildup factor for low atomic number material (Al, Z=13) is higher than that for medium (Fe, Z=26) and heavy (Pb, Z=82) material for the same photon energy (10MeV). A rapid decrease of the buildup factor values with the increase of Z is seen. This dependence is in a good agreement with the fact that the proportion of the cross section for Compton effect decreases with increasing atomic number, therefore the Compton effect plays a more significant role in lighter materials which have lower atomic number (Z).• Dose buildup factor is inversely proportional with the increase of energy within the studied enrgy range (4 - 10)MeV. This behavior can be explained that the cross section for Compton scattering within the studied energy range is decreased with increase ofenergy and this means that the probability of scattering is decreased and it is finally reflected on the buildup calculation, since the scattering plays an important role in determination of buildup factor.The rate of increase in the value of dose buildup factor in lead (Z = 82) higher than iron (Z = 26), and the last is more than that for aluminium (Z = 13). This is due to the effect of pair production interaction which is directly proportional with the square of atomic number.Dose buildup factor in the presence of pair production is higher than dose buildup factor in the absence of pair production effect. The deviation between the values of dose buildup factor in the presence and absence pair production is increased when the energy is increased within the studied energy; this mainly due to the increase of cross section for pair production values within the studied energy range.

دراسة الخصائص النووية التركبية والانتقالات الكهرومغناطيسية لانوية Kr ، Xe ، Nd ، Ge الزوجية - الزوجية باستخدام نموذج البوزونات المتفاعلة == Study of Nuclear Structure Properties and Electromagnetic Transitions for even - even Kr , Xe , Nd , Ge Nuclei in the Framework of Interacting Boson Model

Author name: عبد القادر سعد عبد القادر
Supervisor name: سعد ناجي عبود
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: لقد تم في هذا البحث دراسة التركيب النووي والانتقالات الكهرومغناطيسية لبعض النظائر (الزوجية - الزوجية ) Nd , Xe , Kr وGe باستخدام النموذج الجماعي ( نموذج البوزونات المتفاعلة الثاني IBM - 2 ) . تم الحصول على نتائج لمستويات الطاقة، والانتقالات الكهربائية B(E2) , الانتقالات المغناطيسية B(M1) , ونسبة الخلط (E2/M1) ، وعزم رباعي القطب الكهربائي ، وعزم ثنائي القطب المغناطيسي ، والانتقالات احادية القطب . ولقد تم مقارنة النتائج مع القيم العملية المتوفرة وقد وجد انها متقاربة ومقبولة . ان نظائر ال Kr (Z=36 ) تقع في المنطقة الانتقالية القريبة من التحديد الاهتزازي. ولقد تم حساب مستويات الطاقة B(E2) ، B(M1) ، (E2/M1) وX(E0/E2) لبعض الانتقالات المختارة باستخدام نموذج البوزونات المتفاعلة الثاني (IBM - 2) وان جميع النتائج قد قورنت مع القيم العملية. لقد كان لمعاملات ماجيرونا اثرا كبيرا في حساب مستويات الطاقة , , , التي حددت انها تمتلك صفات تناظر مختلطة . لقد تم مقارنة نتائج نظائر Xe التي تم الحصول عليها من نموذج IBM - 2 مع التوقعات النظرية لتماثل النقطة الحرجةE(5) . وتبين ان 128Xe هو ليس نظير يقع ضمن E(5) كما اقترح مسبقا . لذا فان نسبة الطاقة لنظير ال Xe128 ( ) تقع بين E(5) وحدود - softγ . وبذلك فحسب هذه النسبة فان 128Xe يجب ان يقع بين E(5) وO(6). غالبا ما يكون اختبار 130Xe مناسب لنظائر Xe ، والذي يظهر خصائص E(5) بافضل حالته. كذلك فان مستويات الطاقة تعزز وجود هذا النظير ضمن E(5) . اما بالنسبة لنظائر 132Xe و134Xe فانها تظهر صفات مشابهة للمحدد الاهتزازي SU(5) . ان مستويات التناظر المختلطة قد تم التعريف عليها من نظائر Xe وهذا قد مكننا من تعقب تحرير فونون واحد لحالة في سلسلة النظائر ( الزوجية - الزوجية ) للزنون من الاهتزازات القريبة من N=82 الى نواة - softγ باتجاه منتصف القشرة . لقد درسنا الخصائص النووية لنظائرNd (A=144 - 154) في IBM - 2 وتم الحصول على نتائج جيدة مقارنة بالقيم العملية . 144 - 150Nd يقع في المنطقة الانتقالية ( الاهتزازي - الدوراني ) SU(5)→SU(3) .بينما نظائر 152 - 154Nd فانها تقع ضمن التحديد الدوراني (SU(3)) . ان X(5) سوف ياخذ مكان او حيز عندما يستمر بحركته بين تناظر U(5) الى تناظر ال SU(3) ويظهر ذلك بصورة واضحة ما بين مستويات الطاقة وقوى الانتقال رباعي القطب E2 . لقد وجد حديثا ان سلسلة نظائر Nd تشير الى الانتقالات الطورية كما ان نظير Nd150 يعرضا الخواص المتوقعة ل X(5) . على العموم فان هناك عدة دراسات مفصلة بحاجة للحصول على تلك المؤشرات . وبالنهاية نستنتج بان بعض نظائر Nd تكتشف خواص X(5) . ان , هي حالات تناظر مختلطة لنظائر Nd ان نموذج البوزونات المتفاعلة IBM - 2 كان ناجحا بوصفه للخواص التجميعية للنواة . وفي هذا البحث قد تم الاهتمام بالتطبيقات النظامية والمتضمنة اشكال البوزونات المختلطة.ان النظائر الجرمانيوم ( الزوجية - الزوجية ) لها اهتمام خاص بسبب وجودها ضمن مجموعتين من الحزم ذات الخواص المعقدة للنواة الخفيفة . ان نموذج البوزونات المتفاعلة IBM - 2 مع التركيبات المختلطة يجهز توصيف جيد لكلا الحالات المبينة بالمستوى الارضي وللبروتونات الموجودة بالمستوى المتهيج عبر غلاف القشرة Z =28 المغلق . لقد تم دراسة نظائر الجرمانيوم وتبين انه يتدرج مابين وسط قشرة البروتون والقشرة المزدوجة القريبة من المغلقة عند ال 82Ge . ولقد وجد ان نظائر الجرمانيوم عند التشكيل Nπ=2 تاخذ الشكل الاهتزازي وعند التشكيل Nπ= 4 تاخذ الشكل الدوراني ( ويزداد التشوه) . وفي هذا العمل استخدمت طرق حديثة جدا لتعيين الشحنات الفعلية (effective charge) للبوزونات وذلك باستخدام القيم العملية للانتقال رباعي القطب (0_1^+ 2_1^+ B(E2; وكذلك استخدمت طرق جديدة لحساب المعاملات الجيرو مغناطيسية للبوزونات gυ ، gπ وذلك بمعايرتها الى القيم العملية لـ B(M1) وδ (E2/M1) . | Nuclear structure Properties and electromagnetic transitions of some even - even Kr, Xe, Nd and Ge isotopes have been studied in this work, by using the collective Interacting Boson Model - 2 (IBM - 2). The Interacting Boson Model (IBM - 2) has been very successful in describing the collective properties of nuclei. This work concerns a systematic applications of the model, involving configuration mixing of bosons.There have been extensive IBM studies of low - lying positive parity bands, which are based on the ground state and the quadrupole degree of freedom. The results for energy levels, B(E2), B(M1), mixing ratios , quadrupole and magnetic dipole moments and monopole transitions, were compared with some previous experimental and theoretical values. It was found that an acceptable degree of agreement between the predictions of the IBM - 2 and the experiment can be achieved. The Kr isotope (Z = 36) lies in the transitional region closer to the vibrational range of nuclei. Energy , levels B(E2), B(M1) and the mixing ratios δ(E2/M1) and X(E0/E2) for selected transitions in this isotope were calculated in the framework of the interacting boson model (IBM - 2). All results were compared with experimental data. Some experimental X(E0/E2) ratios were calculated from available experimental data. Majorana parameters were found to have a great effect on the calculated energy levels of the , , and states which indicates they have mixed symmetry properties. The results of IBM - 2 for Xe isotopes were compared with the theoretical predictions assuming a critical point symmetry E(5) which leads to conclude that 128Xe is not an E(5) isotope as previously suggested. In this case of the 128Xe the observable is intermediate between the value for E(5) and gamma soft limit . The ratio suggests that 128Xe should lie between E(5) and O(6). Similar test using 130Xe as a most likely candidate amongst the Xe isotopes, conclusively demonstrate a how well E(5) is realized in the best case. The energy ratio confirmed that this isotope an E(5) critical point symmetry. The 132Xe and 134Xe show vibrational - like character (SU(5) limit). Mixed symmetry states are also studied. It is found that some of the mixed symmetry states with moderate high spins change very fast with respect to the Majorana interaction. Under certain conditions, they become the yrast state or yrare state. These states are difficult to decay and become very stable. This study suggests that a possible new mode of isomers may exist due to the special nature in their proton and neutron degrees of freedom for these isotopes. The mixed - symmetry states or at least a fragment of it have been identified in Xe isotopes. This enables us to trace the evolution of the one - phonon states in the even - even xenon isotopic chain from the vibrators near N = 82 to the γ - soft nuclei towards mid - shell. We have studied the nuclear properties of Neodymium isotopes with (A =144 - 154) in IBM - 2. A good agreement results with the experimental data. 144 - 150Nd lie in the transitional region (virational - rotational limit SU(5)→SU(3)). For the 152 - 154Nd isotopes the energy ratio are well described by the rotational limit SU(3). The X(5) symmetry would take place when moving continuously from the pure U(5) symmetry to the SU(3) symmetry and it implies a definite relations among the level energies and among the E2 transition strengths. It was recently shown that a signature of phase transition is observed in the chain of Nd isotopes, 150Nd display the predicted features of the X(5) symmetry and mark therefore the critical point. However, more detailed studies and experiments are needed to get ideas about this signature. At the end, we have concluded that some of Nd isotopes display X(5) symmetry features. The and are mixed symmetry states in Nd isotopes. The even - even isotopes of germanium are of special interest because of the coexistence of two sets of bands, of very different character, in the lighter nuclei. The IBM - 2 with configuration mixing provides a good description, both of states built on the normal ground state and of those associated with a proton pair excitation across the Z =28 closed - shell gap. Ge isotopes are studied, ranging from the middle of the neutron shell to very near the doubly closed shell at 82Ge. Same Hamiltonian is used for all the nuclei studied, with parameters which are constant or smoothly varying

تخمين معاملات زيوغ العدسه المغناطيسية باستخدام الحل التحليلي لمعاده المسار القريب من المحور == Magnetic Lens Aberration Coefficients Estimation by Using the Analytical Solution for the Paraxial Ray Equation

Author name: رشا يوسف حمد
Supervisor name: عدي علي حسين | خالد عباس يحيى
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: اجريت دراسة نظريه باستخدام الصيغه التحليلية لمعادله المسار شبه المحوري للالكترون وذلك لتحديد افضل الخواص البصريه للعدسة المغناطيسية. تم دراسهة معاملات الزيوغ كمعاملات الزيوغ الكروية, اللونيه, التشويه القطري واللولبي. اعتمد في هذا البحث انموذج الشكل الناقوسي لكلاسر لتمثيل توزيع المجال المحوري للعدسة المغناطيسية. وقد اخذ بنظر الاعتبار حالتين للزخم الابتدائي في الحسابات بوجوده او عدم وجوده في الحالتين. ان الوصول الى امثل النتائج قد انجز من خلال تغير بعض المعاملات المؤثرة مثل نصف العرض عند نصف الحد الاقصى(a= 2.01, 2.02, 2.03 and 2.04 mm), والحد الاعلى لكثافة الفيض المغناطيسي (Bm= 0.001, 0.002, 0.003 and 0.004 Tesla) وزاوية انبعاث الالكترون (0.2, 0.4, 0.5 and 0.6 rad= θ).من خلال النتائج تبين ان افضل قيم a تساوي 2.04 mm في حاله وجود او عدم وجود الزخم الابتدائي في الحسابات. وقد وجد ايضا ان كل من قيم الزيغ الكروي, اللوني والتشويه اللولبي يقل بزيادة a, بينما اقل قيم للزيغ الكروي والتشويه القطري في الحاله الاولى عندBm يساوي 0.004 Tesla.ووجد ايضا ان افضل الزوايا للالكترون (θ = 0.2 rad) وهي تتناسب طرديا مع معاملات الزيغ اللوني والتشويه اللولبي.ومن جهة اخرى تبين ان الزيغ الكروي والتشويه القطري له قيم سالبه وهذه المعاملات ممكن استخدامها كمصحح في المنظومات البصرية. | A theoretical investigation is carried out by using an analytical expression for paraxial trajectory of an electron in a magnetic lens to estimate the optimum properties of the magnetic lens. The aberration coefficients of the magnetic lens are studied, such as the spherical, chromatic, radial distortion and spiral distortion aberration coefficients. The Glaser's bell - shaped model is adopted to represent the axial field distribution of magnetic lens. The initial momentum of the electrons is taken into account, where the calculations are made for two cases : when the electrons have zero and non - zero initial momentum values . The optimization role is achieved by changes some of the effective parameters at the range of the half - width at half maximum (a = 2.01, 2.02, 2.03 and 2.04 mm), the maximum magnetic flux density (Bm = 0.001, 0.002, 0.003 and 0.004 Tesla) and the electron emission angle (θ = 0.2, 0.4, 0.5 and 0.6 rad). In the present results the optimum values for both cases of the initial momentum is found at the half - width at half maximum equal to 2.04 mm, and the values of the spherical, chromatic and spiral distortion aberration coefficients decreased as the half - width at half maximum (a) increased, while the minimum values of the spherical and radial distortion aberration coefficients are found at Bm = 0.004 Tesla in the first case. However the best angle is found at θ = 0.2 rad which is directly proportional which chromatic and spiral distortion aberration coefficients. On the other hand the calculations appeared that the negative values for both spherical and radial distortion aberration coefficients are estimated and these coefficients can be used as corrector in the optical systems.

محاكاة حاسوبية لجهاز صوتي بصري لنظام فوتوني == COMPUTER SIMULATION OF AN ACOUSTO - OPTICAL DEVICE FOR PHOTONIC SYSTEM

Author name: مروة كمال مصطفى
Supervisor name: اياد عبد العزيز العاني | احمد كمال احمد
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: Acousto - optics science deals with the interaction between sound and light waves. Acousto - optic waves are most important in transferring signals through the communication systems, since modulating signals takes a great advantages in the field of communication engineering, bio - medical, laser beam deflection and laser intensity modulation.The aim of this work is to simulate the fundamentals of an Acousto - Optic Modulator. The simulation procedure is based on theoretical and computational relationships describing acousto - optic properties for three selected materials which are “Glass, Germanium, and Tellurium - Oxide”. Two computer programs have been written using “MATLAB” software, the first used to verify the normalized intensity of the diffracted orders versus peak phase delay using partial differential equation, while the second program is used to study the normalized intensity of the electric field versus time wave propagation and electro - magnetic wave propagation in x, y and z directions, using Finite Difference Time Domain. The results for Glass and Tellurium - Oxide materials shows that the periodic exchange of the normalized intensity between the zero and first orders becomes smaller as the interaction length D increase, this indicate that the higher orders may appear very clear in these materials. The results for the Glass material show that the normalized intensity of the electric field increases with increasing electromagnetic wave propagation in x, y and z directions.

ضغط الصوت باستخدام الكسوريات == Fractal Audio Compression

Author name: وسام فوزي جاسم محمد
Supervisor name: لؤي ادور جورج | ليث عبد العزيز العاني
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: لقد استحدثت طرق ضغط عديدة باستخدام تقنيات مختلفة الغرض منها تحقيق نسب ضغط عالية مع المحافظة على جودة الصوت المضغوط, مع الاخذ بنظر الاعتبار انجاز الضغط باقل وقت ممكن.طريقة الضغط الكسوري هي احدى هذه الطرق التي يرافقها ضياع بالبيانات وتعتبر من طرق الضغط الحديثة وتعتمد على عملية ايجاد مجاميع محددة وصغيرة من المعادلات الرياضية التي تصف الاشارة . بارسال معاملات هذه المعادلات الى محلل الشفرة يمكن اعادة تشكيل الاشارة الاصلية.بايجاز ضغط الصوت الكسوري يعتمد على مبدا نظام التكرار المجزئPIFS) ). ضغط الصوت الكسوري يستغل ال(Affine redundancy) والتي تتواجد في الصوت, هذه ال (redundancy) ترتبط بالتشابه الذاتي للصوت.بكلمة اخرى ضغط الصوت الكسوري يقوم بايجادالا نماط المتشابهة والتي تتواجد بقياسات مختلفة(different scales) واماكن مختلفة(different places) في الصوت, وبعد ذللك يقوم بحذف اكثر ما يمكن من ال(redundancy).هذا البحث يهدف الى محاولة التحقق من امكانية تطبيق الضغط الكسوري في عملية ضغط الصوت. النظام المعتمد يتكون من مرحلتين : المرحلة الاولى مرحلة التشفير(Encoding Unit) والثانية مرحلة فك التشفير ) .(Decoding Unitفي مرحلة التشفير يجزا الصوت الاصلي الى نوعين من الكتل, كتل تدعى كتل المجال المقابل ((Range Pool وهي كتل غير متداخلة, وكتل تدعى كتل المجال (Domain Pool) والتي من الممكن ان تكون متداخلة. ومن ثم يتم تقطيع الصوت باستخدام طريقة التقطيع المتساوي للكتل الى كتل متساوية الحجم. بعد ذلك يتم ايجاد افضل كتل في المجال لكل كتلة في المجال المقابل وذلك بتطبيق احد انواع التحويلات وتدعى((Affine Transformation .تنتهي مرحلة التشفير بخزن تفاصيل (معاملات )هذه التحويلات لكل كتلة من كتل المجال المقابل .ان عملية ايجاد الكتل المتشابهة تتطلب عمليات حسابية معقدة تستغرق وقت طويل وهذا ما يؤخذ على طريقة الضغط الكسوري كنقطة ضعف.ان البرامجيات التي تم بناؤها لهذا الغرض تم اختبارها باستخدام خمسة نماذج لبيانات صوتية. لقد تم تنفيذ النظام المعتمد باستخدام فيجوال بيسك6.0 كلغة برمجة, تم استخدام معدل الخطا التربيعي((MSE ونسبة الاشارة الى التشويش((PSNR كمعاملات حساب دقة النتائج المستخلصة من التقنية الكلية في النظام المعتمد.و كانت بعض النتائج المستخلصة من البحث هي بالنسبة للعينة الاولى في حالة حجم الكتلة تساوي (60 ) فان نسبة الضغط (15.51 : 1), اما العينة الثانية في حالة حجم الكتلة تساوي (40) فان نسبة الضغط (11.51 : 1), وفي حالة حجم كتلة صغيرة كما في العينة الثالثة والتي تساوي (20) فان قيمة ال(PSNR) جيدة وتساوي (35.76 dB), وكذالك للعينة الاولى في حالة حجم الكتلة تساوي (10) فان قيمة ال(PSNR) تساوي (45.63 dB). | Fractal audio compression is based on the concept of a partitioned iterated function system (PIFS). Fractal audio compression exploits the affine redundancy that is commonly present in audio; this redundancy is related to the similarity of an audio with itself. In other words, fractal audio compression finds similar patterns that exist in different scales and different places in audio, and then eliminates as much redundancy as possible. In this work the possibility of implementing fractal audio compression is investigated. The implemented system consists of two major units; the first is the Encoding unit and the second is the Decoding unit. Encoding is done by partitioning the range pool (which is the original audio) into non - overlapping blocks, called range blocks, and partitioning the domain pool (which is the result of the original audio after down sampling) into overlapped blocks with the same size of range blocks called domain blocks. A fixed size - partitioning scheme is used to partition the domain pool and the range pool. After generating the range and domain pools, for every range block, the best - matching domain block in the domain pool is searched for by performing a set of affine transformations on them. Thus the encoding is completed by saving the optimal affine parameters for every range block. The Decoding process can be done by repeatedly applying the affine transformation on an initially blank audio and its subsequent reconstructed audio, until it completely reconstruct an approximate wave to the original audio. The time required to compress an audio file is affected by the size of each block being extracted from the proceed audio file; this means smaller block size implies longer time required to compress the corresponding audio file.The implemented system was tested using five wave samples of data. The proposed work was implemented by using Visual Basic (6.0) as a programming language, the fidelity measure MSE and PSNR were used to check the results of the whole implemented technique. The best results obtained from the implemented system were for the test (sample - 1) in case were block size equal to (60) the compression ratio is (15.51 : 1), also for test (sample - 2) were block size equal to (40) the compression ratio is (11.03 : 1), and for small block size as in test (sample - 3) were the block size is (20) the value of the PSNR is good that its equal to (35.76 dB), also for test sample - 1 when the block size is (10) the PSNR value (45.63 dB).

معالجة رياضية لدراسة تغير التركيب المسامي مع ظروف التشكيل للمواد المسامية == Mathematical Manipulation to Study the Changes of Porous Structure with the Formation Conditions of Porous Materials

Author name: سديم عباس فاضل القصاب
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: تم تطوير نموذج مجسم يصف عملية االتكثيف خلال عملية الحرق الزجاجي (التزجيج) لمادة تحتوي على محتويات صلبة. هذا النموذج تم تطويرة من نموذج سابق للباحث Scherer والذي وضع نموذج يصف عملية التكثيف خلال عملية الحرق لمادة لا تحتوي على محتويات صلبة.النموذج المطور استخدم لمحاكاة معدل التكثيف خلال عملية الحرق لمواد سيراميكية غير متجانسة تتكون من خليط من بعض الاطيان العراقية والتي تم تحضيرها من بحث سابق. النموذج المطور تم استخدامة لدراسة تاثير عدة عوامل على عملية التكثيف خلال عملية الحرق وهي درجة حرارة الحرق، زمن الحرق والنسبة بين حجم المواد الصلبة الى حجم السائل الزجاجي، كما استخدم النموذج المطور في تقدير قيم اللزوجة الفعالة للسائل الزجاجي المتكون خلال عملية الحرق. كذلك تم تطبيق نموذجان اخران للمواد غير المتجانسة هما نموذج الكرة المركبة ونموذج المكون الذاتي وجرى استخدامهما لدراسة تاثير درجة حرارة الحرق وزمن الحرق على عملية االتكثيف لغرض مقارنة النتائج من هذين النموذجين مع نتائج النموذج المطور. كذلك تم استخدام النموذج المطور لدراسة تاثيرتوزيع حجوم المسامات على عملية التكثيف وذلك بفرض توزيع كاوس لحجوم المسامات واعادة صياغة المعادلات للموديل المطور لجعلها تعتمد على الانحراف المعياري لتوزيع حجوم المسامات. العوامل الفيزيائية مثل اللزوجة تم حسابها من خلال عملية المطابقة (fitting ( للنتائج العملية لعملية الحرق للنماذج. تم تصميم برامج حاسوبية بلغة ( (FORTRAN 90لدراسة تاثير درجة حرارة الحرق على عملية االتكثيف باستخدام النموذج المطور، نموذج الكرة المركبة ونموذج المكون الذاتي. هذة البرامج تم تحويرها فيما بعد لمحاكاة عملية االتكثيف كدالة لزمن الحرق. كذلك برنامج اخر تم تصميمة لدراسة تاثيرتوزيع حجوم المسامات على عملية التكثيف خلال عملية الحرق باستخدام النموذج المطور. النتائج من برنامج الموديل المطور تحقق افضل مقاربة للنتائج العملية تليها النتائج من برنامج موديل الكرة المركبة. النتائج من برنامج تاثيردرجة حرارة الحرق تشير عموما" الى زيادة معدل االتكثيف مع زيادة درجة حرارة الحرق، رغم ذلك، عندما تكون نسبة المواد الصلبة عالية نسبيا" فاءن اللزوجة تزداد عند الدرجات الحرارية العالية (حوالي 1400سo ) يعزى ذلك الى عملية نمو بلوري محتملة، وعلية يؤدي ذلك الى نقصان معدل االتكثيف. النتائج من برنامج تاثير زمن الحرق تشيرالى ان النموذج المطوريتنبا بزيادة شبة لوغارتمية للكثافة النسبية مع الزمن، بينما يتنبا النموذجان الاخران ( نموذج الكرة المركبة ونموذج المكون الذاتي) بزيادة اسية للكثافة النسبية مع الزمن. النتائج من البحوث السابقة تتفق مع توقع النموذج المطور. النتائج من برنامج تاثيرتوزيع حجوم المسامات على عملية التكثيف تدل على ان هذا العامل لة تاثير قوي عندما يكون التوزيع عريضا" فقط على المراحل النهائية لعملية التكثيف لان المسامات الكبيرة غلقها بطىء نسبيا". | A mathematical model describing the densification process during viscous sintering process of a material contains solid inclusions is developed (modified) from a Scherer model which describes the rate of densification during sintering for a free solid inclusions material. The modified model is used to simulate the rate of densification during sintering process for ceramic heterogeneous materials consist from mixtures of some Iraqi clays that had been prepared in a previous work. In addition the modified model is used to study the effect of several factors on densification during sintering process and used in predicting the effective viscosity of the viscous phase that formed during sintering. The factors are the sintering temperature, sintering time, and the ratio of solid inclusions volume to viscous phase volume.Another two heterogeneous models which are the composite sphere and the self consistent models are also applied and used to study the effect of sintering temperature and sintering time on densification during sintering for comparison with the present developed model.The modified model is also used to study the effect of pore size distribution on densification process by assuming a Gaussian distribution for the pore sizes and reformulating the equations of the modified model to make them depend on the standard deviation of pore size distribution.The physical parameters like viscosity are computed from the fitting process of the practical data of the samples.Computer programs in FORTRAN 90 language are designed to study the effect of sintering temperature on densification process using the developed model, the composite sphere and the self consistent models. These programs are modified to simulate the densification process versus time duration of the sintering process. Another program is designed to study the effect of pore size distribution on sintering process using the developed model. The results from the developed (modified) Scherer model are better fit the practical data, then the composite sphere model. The results from the program of the effect of sintering temperature indicates in general that the rate of densification is increased with increasing sintering temperature, this is due to the decrease in the viscosity with temperature increasing. However, when the ratio of the solid inclusions is high the viscosity is increased at relatively high sintering temperatures (about 1400oC) this increase in viscosity may be due to induced crystallization processes, accordingly the rate of densification is decreased at these circumstances.The results from the program of the effect of sintering time indicate that the modified model predicts that the increase in density is semi logarithmic with time, while the other two models predict an exponential increase with time. The results from the program of the effect of pore size distribution indicate that this parameter has a strong effect if the distribution is broad only in the last stages of densification because the largest pores are relatively slow to close

دراسة تاثير المحاليل الالكتروليتيه على خواص العزليه الكهربائية للبورسلين المشكل من مواد محليه == A STUDY OF THE EFFECT OF ELECTROLYTE SOLUTION ON THE PROPERTIES OF ELECTRICAL INSULATOR PORCELAIN FORMED USING LOCAL MATERIAL

Author name: عتاب فاضل حسين
Supervisor name: فاضل عبد رسن | ازهار جواد داوود
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: يهدف البحث الى دراسه تاثير المحلول الالكتروليتي ونسب تركيزه على الخواص الكهربائية والفيزيائية لجسم البورسليني الذي تم تحضيره باستخدام مواد محليه عراقيه. تم تشكيل الجسم بور سليني من كاؤلين دويخله،رمل زجاج ارضمه، فلدسبار وبنسب وزنيه (45 %, 30% , 25%) على التوالي. ولقد اجريت معامله كيميائية لكل من الكاؤلين والسليكا بهدف تنقيتها من الشوائب التي يمكن ان تذوب بحامض الهيدروكلوريك حيث تمت دراسة التغيرات الحاصلة من خلال تحاليل . IR قسمت الدراسة الى سبعه مجاميع محضره من هذه المواد طبقا لنسب المضافة من المحلول الالكتروليتي المحضر من (NaCO3+NaSiO3) وبنسبه (2 : 1) ان نسب اضافات المحلول الالكتروليتي هي 0.7%,1%) ,0.5% 0.2% , 0.1%) حيث ثبت نوع ونسبه الماده المعدنه في تشكيل الجسم البورسليني وهي او كسيد الزنكZnO وبنسبه (.(2% تم تشكيل مكبوسات من هذه الخلطات وبعد التجفيف تم حرقها لدرجات حرارة مختلفة1350oC) (1250, 1300 اجريت القياسات العزليه الكهربائية (ثابت العزل ومعامل الفقدان العزلي) وكذلك التوصليه الحرارية وقابليه الانضغاط. ان النتائج المتحققة لنماذج المحروقه بدرجه 1350oC ا بد ت نمط من ثبوت قيم العزليه الكهربائيه عند حدود معينه من تراكيز المحلول الالكتروليتي المضاف لمكونات الجسم البورسليني ضمن مدى((0.2 - 0.1% , في حين هنالك تغير في قيم التوصليه الحراريه ضمن مدى (0.2 - 0.5%) من تركيز المحلول الالكتروليتي. وان قابليه الانضغاط تكون عاليه عند حدود (0.5%) من تركيز المحلول الالكتروليتي لنفس المكونات،وبالتالي يتطلب اعتماد مفاضلة في الخواص وحدودها لاختيار افضل تركيز المحلول الالكتروليتي بما يوفر توافق نتائج الخواص العملية مع الخواص الصناعية القياسية المتحققة على منتجات محضره من مواد بلدان اخرى ومعتمدة لديهم ، لقد تم اعتبار ان افضل تركيز يتوافق مع الخواص العزليه الكهربائية وكذلك التوصليه الحرارية والميكانيكية هو (0.2%) كما اشاره اليه النتائج. | This study was carried out to prepare a porcelain samples, which can be used as an electrical insulator. The raw materials used for the preparation are kaolin Duakhla, Arudhma Sand glass and Potash feldspar with weight percentage (45%, 30%, 25%) respectively. A chemical treatment was performed on kaolin Duakhla, Arudhma Sand glass to remove all the impurities. The effect of the washing by HCl acid (chemical treatment) was examined by IR Tech. The study divided into seven groups. Relating to the concentration of electrolyte solution which is consisting of (NaCO3 & NaSiO3) as a ratio (2 : 1), and for fixed percentage of mineralizer (2%ZnO). The concentrations of electrolyte which were added to these groups are (1%, 0.7%, 0.5%, 0.2%, and 0.1%). Samples of each group have been prepared, and then each sample was pressed, then after that these samples are dried and sintered for different temperatures (1250, 1300, 1350 oC). Dielectric measurement (Dielectric Constant& Dielectric loss index) were carried out for these pressed samples, also Physical properties “Thermal conductivity” and mechanical properties “Compression strength” were measured for these samples. The results of these measurements for samples sintered at 1350oC are found to have a stable change at the range (0.1 - 0.2%) of concentration of electrolyte solution. While there is a change in the results of thermal conductivity in the concentration range (0.2 - 0.5%) of electrolyte solution. And the values of compression strength is found to be high at 0.5% concentration of electrolyte solution. Therefore we should select the best concentration of electrolyte solution, to get the optimum properties which would agree with practical results and the standard properties for the attentive in other countries of the world. Then, can regarde the (0.2%) concentration of electrolyte solution is the optimum value that can be used in the industry of the electrical insulators

دراسة النشاط الاشعاعي الطبيعي للمخلفات النفطية == A study of the natural radioactivity of thepetroleum waste

Author name: عصام محمد رشيد درويش
Supervisor name: ندى فاضل توفيق | كريم خلف محمد
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: The aim of this study is to detect the radioactivity of radionuclides and measure the specific activities and the uranium concentration in (30) samples of crude oil and oil waste were brought from three oil locations Dora refinery, Bijie refinery, and north field of al - Rumaila. The measurements in this study were done by using two techniques : 1 - Gamma rays spectroscopy system was used to measure the specific activity for radionuclides. This system is consist of high purity of germanium detector (HPGe) with personal computer as multi channel analyzer (MCA) that computerized to plot the radioactive spectrum and compute the specific activities of the radionuclides. There are seven radionuclides are detected : (Bi - 214, Ra - 226, TI - 208, Bi - 212, Pb - 212, K - 40, and Cs - 137), these radionuclides included; two radionuclides (Bi - 214,Ra - 226) belong to the U - 238 series, three radionuclides (TI - 208, Bi - 212, Pb - 212) belong to Th - 232series, one natural radionuclide (K - 40), and one artificial radionuclide (Cs - 137).For Dora refinery samples, the averages of specific activities of (Bi - 214, Ra - 226) were (7.79, 16.08) Bq/kg respectively, the averages of specific activities of (TI - 208, Bi - 212, Pb - 212) were (7.95,4.05,5.75) Bq/kg , the average of specific activities of (Cs - 137) was (0.64) Bq/kg , the average of specific activities of (K - 40) was (99.3) Bq/kg. For Bijie refinery samples, the average of specific activities of (Bi - 214)was (0.39) Bq/kg, the averages specific activities of (Bi - 212, Pb - 212)were (0.02,0.01) Bq/kg, the average of specific activities of (K - 40) was(2.28) Bq/kg , and three radionuclides (Ra - 226, TI - 208, and Cs - 137) werenot appeared in Bijie samples.2 - solid state nuclear track detectors technique (SSNTDs), the uraniumconcentration determined by using CR - 39 track detector and fissionfragment track technique, the nuclear reaction used as source of uraniumfission fragment is U - 235 (n - f) obtained by the bombardment of U - 235with thermal neutrons emitted from (Am - Be) neutron source with flux(5000 n/cm2.s) for seven days, the concentration were calculated bycomparison with the standard samples.The uranium concentration in Dora refinery samples were rangedbetween (0.95 - 3.34) ppm with average (2.03) ppm for solid samples and(1.25) ppm for liquid samples.The uranium concentration in Bijie refinery samples were ranged from(0.42 - 1.46) ppm with average (0.55) ppm in the solid samples and (1.24) ppm in the liquid samples.The uranium concentration in the north field of al - Rumaila samples were ranged between (1.78 - 6.35) ppm with average (3.37) ppm.From above results, we concluded that the maximum of uranium concentration was found in the north field of al - Rumaila in Basrah governorate, these results are agreement with the permissible limit from IAEA. The maximum of external equivalent dose rate from NORM in oil waste was found in the north field of al - Rumaila was (0.30) mSv/y less than the permissible limit from IAEA which is (1) mSv/y for the public.

حسابات عن الخواص البصريه لعدسه رباعيه الاقطاب كهروسكونيه ثلاثيه == COMPUTATIONS ON THE OPTICAL PROPERTIES OF A TRIPLET ELECTROSTATIC QUADRUPOLE LENS

Author name: اسراء لطيف محمد العميري
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: استعانه بطريقة المصفوفات الانتقاليه والحاسوب الشخصي فقد اجري بحث حاسوبي عن خواص نموذج مستطيلي يمثل المجال المحوري لعدسه ثلاثية كهروسكونيه رباعية الاقطاب، ان مسار حزمة الجسيمات المشحونه الماره خلال المجالات المستطيلية قد تم ايجاده بحل معادلة مسار الحركه بالاحداثيات الكارتيزيه اذ كتب برنامج حاسوبي لهذا الغرض. لقد حسبت الخواص البصريه للعدسة الثلاثية الكهروسكونيه بالاستعانه بمسار الحزمه على امتداد محور العدسه. وكتبت برامج حاسوبيه بفورتران ٧٧ لايجاد مختلف الخواص البصريه. وتم تركيز الحسابات على ايجاد الابعاد البؤرية ومعاملات الزيوغ الكروية في كلا المستويين الافقي والعمودي للمسار على امتداد المحور البصري. وقد اظهرت النتائج ان اختيار المعلمات الهندسية والتشغيلية يعتمد على وظيفة العدسه الثلاثية الكهروسكونية الرباعية الاقطاب في منظومة بصريه الكترونيه او ايونيه معينة.

دراسة الخواص الحراريه للاغشيه الرقيقه الذكيه نوع نيكل - تيتانيوم == Study of Thermal Properties of NiTi Thin Film Shape Memory Alloy

Author name: هديل ثامر خضير
Supervisor name: عماد خضير الشكرجي
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: سبائك ذاكرة الشكل (SMA) shape memory alloyاو ما يسمى بالمواد الذكيه هي نوع من السبائك المعدنيه التي تعاني تحولات طور من الاوستنايت الى المارتنسايت عند تعرضها الى حراره او اجهاد كافي للتحول ولها القدره على الرجوع الى نفس حالة الشبيكه قبل التحول عند زوال المؤثر .لقد تم التركيز في هذه الدراسه على الخواص الحراريه كمحاوله لفهم التصرف الذي يحدث في الغشاء الرقيق والذي يتمثل بكسر شريحة الفلم عند تسليط قيمه معينه من الفولطيه والتيار وعند قيمه معينه من حرارة الاساس . وقد اخترنا دراسة غشاء NiTi لان له دور مهم في التطبيقات الطبيه والصناعيه .لقد تم حساب التوصيل الحراري والسعه الحراريه لغشاء NiTi نظـريا وكذلك تم حساب التوصيل الحراري والسعه الحراريه للزجاج المستخدم كاساس للغشاء عمليا وبعدها تمت مقارنة نتاءج هذه الحسابات للغشاء والزجاج وتفسير سبب الكسر في شريحة الغشاء والذي تبين انه يحدث في الزجاج نتيجة للفرق الكبير في الخواص الحراريه بين الغشاء والزجاج وهذا بسبب عدم تحمل الزجاج للطاقه الحراريه العاليه الناتجه خلال عملية تحول الطور بين الاوستنايت والمارتنسايت في الغشاء الرقيق والتي تسلط على الشريحة الزجاجيه للغشاء. | Shape memory alloys (SMA) or intelligent material, which are also called smart material, are a group of metallic alloys that undergo phase transformation from Austenite to Martensite when heated or subjected to appropriate stresses. After cooling or removing the stress, they have the ability to remember their previous structure and return to it.The concern of this study is on the thermal properties of NiTi thin film and its substrate as an attempt to understand the behavior occurring in the thin film slide represented by breaking it at certain values of voltage, current and substrate temperature (Ts). We have selected NiTi alloy because of its important medical and industrial applications. Thermal conductivity and heat capacity of NiTi thin film have been calculated theoretically and the thermal conductivity and heat capacity of glass substrate are measured experimentally. The cause of breaking in the thin film slide is the result of large difference in the thermal properties represented by thermal conductivity and heat capacity between the NiTi thin film and glass substrate. This is because the glass can not bear the high amount of heating energy resulting during the phase transformation process between Austenite and Martensite which exerts on the thin film slide

دراسة التحولات الطورية والنقاط الحرجة في منطقة العناصر الارضية النادرة ضمن اطار نموذج البوزونات المتفاعلة IBM - 1 == STUDY OF PHASE TRANSITIONS AND CRITICAL POINTS IN THE REARE EARTH REGION IN THE FRAMEWORK OF INTERACTING BOSOM MODEL (IBM - 1

Author name: فؤاد عطية مجيد العجيلي
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: A systematic study of isotope chains in the rare - earth region is presented. For the chains 144, , , and 150, energy levels, E2 transition rates, and two - neutron separation energies (SNd15460−Sm16014662−Gd16214864−Dy16666−2n) are described by using the most general (up to two - body terms) IBM - 1 Hamiltonian. For each isotope chain a general fit is performed in such a way that all parameters but one are kept fixed to describe the whole chain.In this region, nuclei evolve from spherical to deformed shapes and a method based on catastrophe theory, in combination with a coherent state analysis to generate the IBM - 1 energy surfaces, is used to identify critical phase transition points.The approach used to fix the Hamiltonian parameters leads to a very good global agreement with the recent available experimental data corresponding to excitation energies, B(E2)’s and S2n values. In particular, an excellent agreement with the measured S2n values is obtained, which is considered a key observable to locate phase transitional regions. The analysis presented here is consistent with previous CQF studies in the same region. As a result we find that 148Nd and 150Sm are the best candidates to be critical, but we should remark that 150Nd and 152Sm are not far away from it.

حسابات الامثليه لمنظومة حرف الحزمة الالكترونية == A COMPUTATIONAL OPTIMIZATION OF AN ELECTRON BEAM DEFLECTING SYSTEM

Author name: عدي علي حسين العبيدي
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: تم استخدام التقريبين التحليلي والتركيبي لطريقة الامثلية في الدراسة الحالية لايجاد التصميم الامثل للحارفات المغناطيسية والكهروسكونية التي تعطي اقل زيغ كروي ولوني. استخدم التقريب التركيبي في حسابات الحارفة المغناطيسية وتم استخدام ملف الانحراف ذو النير الراكب (saddle yoke deflection coil) مصدرا للمجال المغناطيسي، عدة نماذج لتوزيع المجال المحوري استخدمت في الحسابات وكذلك تم استخدام انموذج جديد تم اقتراحه في الدراسة الحالية. فكرة العدسة الشيئية المتحركة اعتمدت في حسابات مجال الانحراف، زيوغ الانحراف خفظت لكل انموذج لتوزيع المجال بتغيير شكل ملف الانحراف، حيث غير الطول والزاوية. باستخدام امثل توزيع للمجال المحوري لكل حالة تم ايجاد تصميم قطع القطب التي تعطي توزيعات المجال هذه باستخدام طريقة اعادة البناء.في حسابات الحارفة الكهروسكونية، كل من التقريبين التحليلي والتركيبي استخدما لايجاد التصميم الامثل الذي يعطي اقل زيغ. تم اولا، استخدام التقريب التحليلي لدراسة بعض تصاميم الحارفات الكهروسكونية والتي تتكون من صفيحتين متوازيتين؛ الوصول للامثلية تم بتغيير الشكل الهندسي للحارفة عن طريق تغيير ابعاد الصفائح المتوازية. ثانيا، التقريب التركيبي استخدم لايجاد اقل قيم للزيغ باستخدام توزيع جديد اقترح في الدراسة الحالية للحارفات الكهروسكونية تحت البحث. شكل الحارفة تم ايجاده باستخدام طريقة اعادة البناء.اخيرا، الحارفات المغناطيسية والكهروسكونية جمعـت وركبت لتعطي عامود كامل لانظمة الانحراف ورسمت مقاطع مستعرضة لمسارات الحزم.

دراسة نظرية لطاقة الترابط لذرة الليثيوم

Author name: محمد عبد الحسين حسوني وادي الكعبي
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Karbala
First pages:

قياس تراكيز الرادون للمستشفيات ,المراكز الصحية والمنازل وقياس البورون في مياه محافظة ذي قار - العراق == Measurements of Radon in Hospitals, Health Centers and Dwelling as well as Boron Measurements in Water of Thiqar Governorate(Iraq)

Author name: احمد عباس محمد
Supervisor name: عيسى جاسم محمد الخليفة
General topic: Physics
Degree: Doctorate
Language: English
University location: Basrah
First pages:
Abstract: العمل الحالي يتضمن ثلاث دراسات اجريت جميعها في محافظة ذي قار جنوب العراق, حيث استخدم 976 نموذج فيها.الدراسة الاولى استخدمت 625 نموذج من كاشف الاثر LR 115 Type II جمعت من 40 منزل في كل قضاء , حيث تم قياس مستويات الرادون وخطر الاصابة بسرطان الرئة من خلال الطريقة السلبية . النتائج اظهرة مستويات مرتفعه وخصوصا في المطبخ مقارنتا مع الاماكن الاخرى وذلك بسبب غاز الطبخ والمياه المستعملة. ان المعدل للجرعة المكافئة السنوية للمطبخ تتغير من 2.316±0.172 في الناصرية الى0.759±0.0348 في سوق الشيوخ .اما الدراسة الثانية فقد استخدمت 186 نموذج من كاشف الاثر LR 115 Type IIجمعت من 57 مستشفى ومركز صحي , حيث استعملت الطريقة اعلاه لقياس مستويات الرادون وخطر الاصابة بسرطان الرئة هناك.لقد اظهرت النتائج ان مستويات الرادون في المستشفيات اعلى من نظيرتها في المراكز الصحية. ان اعلى معدل للجرعة المكافئة السنوية للمراكز الصحية 2.504±0.114 mSv/y بينما للمستشفيات3.150±0.091 mSv/y. في كلى الدراستين اعلاه وجد ان اغلب الجرعات الاشعاعية , ليست اعلى من المعدل العالمي 2.4 mSv/y , ولذلك فانها لا تشكل خطرا جديا على المتواجدين.ان الدراسة الثالثة هدفها قياس تراكيز البورون في مياه محافظة ذي قار , حيث ان امدادات المياه تاتي من مصدرين رئيسين وهما نهري دجلة والفرات, حيث جمع 165 نموذج من 55 موقع لثلاثة انواع من المياه (مياه نهر, مياه اسالة , مياه شرب) واستخدمت الطريقة اللونية لقياس تركيز البورون في عينات الماء. ان اعلى التراكيز سجلت لمياه الانهر في قضاء الناصرية 1.729 mg/l , ولمياه الاسالة سجلت في قضاء الجبايش 0.3 mg/l , اما مياه الشرب فسجلت في قضاء الجبايش 0.286mg/l ,حيث النتائج اظهرت كذلك ان نهر الفرات اكثر تلوثا بعنصر البورون وذلك بسبب ان المناطق ذات الكثافة السكانية العالية ,المصانع والمنشات الكبيرة تقع على ضفافه , حيث ان معدل لتراكيز البورون لنهر دجلة 0.244 mg/l , بينما لنهر الفرات 0.794 mg/l . الدراسة الحالية اظهرت ان تراكيز البورون لنهر دجلة ليست اعلى من المعدل العالمي (اقل من 0.5 mg/l) . بشكل عام نتائج نهر الفرات اعلى من المعدل العالمي 0.5 mg/l , ولكنها تبقى ضمن المستويات المنخفضة لتراكيز البورون , حيث حدد الاتحاد الاوربي المستويات المقبولة ب 1.0 mg/L عام 1998 , اما نيوزيلندا فحددته ب 1.4 mg/L. | The present work included three studies carried out in Thiqar Governorate southern of Iraq, where 976 samples has been used .The first study used 625 samples of LR 115 Type II dosimeters where collected from 40 dwelling in each distract, Passive method is used to measure the radon indoor levels and lung cancer risk. The results show higher indoor radon levels and radon effective dose especially in kitchen as compared to other locations. High values of radon activity may be due to use of water and cooking gas in kitchen.The average annual effective dose for kitchen varying from 2.316±0.172 mSv/y recorded in Al Nasiriya district to 0.759±0.0348 mSv/y recorded in Suq AlShyouk district.The second study used 186 samples of LR 115 Type II dosimeters collected from 57 Hospitals and Health centers, also Passive method is used to measure the radon indoor levels and lung cancer risk. The results show that the calculated indoor radon levels and radon effective dose in Hospitals are higher than that in Health Centers.The maximum average annual effective dose in Health Centers is 2.504±0.114 mSv/y , while for Hospitals is 3.150±0.091 mSv/y.In the two studies most of the radiation dose are not higher than the world wide average back ground dose of 2.4 mSv/y and hence they does not pose any serious threat to the occupants.The third study aims is to measure the concentration of boron in waters of Thiqar Governorate (southern of Iraq), the water is supplied from two major sources (Tigris and Euphrates Rivers). 165 samples collected from 55 location for three types of water (rivers water, Tab water, drink water). Colorimetric curcumin method is used to measure the boron concentration in the water samples. The maximum Boron concentrations in Thiqar Governorate for River water (surface water) (1.729 mg/l) in Nasiriya district, Tab water(0.3 mg/l) in Chibiesh district and Drink water (0.286mg/l) in Chibiesh district. The results shown that Euphrates river is more polluted with boron element, because its pass in highly occupied region and meager factories ,facilities lay on it, where Tigris average value 0.244 mg/l,while Euphrates average value 0.794 mg/l.The present work shows most of the boron concentration in Tigris river aren't higher than the world wide back ground <0.5 mg/l. In general Euphrates river results are higher than the world wide back ground, but it's still in the low concentration levels for boron, where the European Union established a value of 1.0 mg/L for boron in 1998 for the quality of water intended for human consumption, also New Zealand has established a drinking water standard for boron of 1.4 mg/L

دراسة نظرية لجزيئة صبغة الكركمين الطبيعية == Theoretical Study of Natural Curcumin Dye Molecule

Author name: حسين علي مدلول ضاحي
Supervisor name: حيدر محمد عبد الجليل | موسى كاظم محسن
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: تم تركيز البحث في هذه الرسالة لحساب الخواص الهيكلية والالكترونية والحرارية والطيفية لصبغة الكركمين الطبيعية والتي توجد في صيغتين ايزوميريتين صيغة الكيتون والاينول باستخدام نظرية دالية الكثافة عند المستوي B3LYP مع دوال اساس مختلفة . تم تنفيذ جميع العمليات الحسابية باستعمال برنامجGaussian 09 وبرنامج Gauss View 5.0.انتقال ذرة الهيدروجين من مجموعة الميثيلين المركزية(CH2) لترتبط بذرة الاوكسجين حتى تشكل اصرة هيدروجينية(O - H) يسبب تغيرات هندسية في شكل الايزوميرين, حيث شكل الاينول هي تركيب خطي تقريبا ولكن شكل الكيتون ليس خطي تماما. هذا يعود الى تشكل اصرة الهيدروجين, بالاضافة الى وجود هذه الاصرة في البنزين. وبالتالي الاواصر الهيدروجينية تؤدي الى تغير الخواص الفيزيائية للايوزوميرين. الدالة 6 - 311G+(d,p) اعطت نتائج جيدة للحسابات ولكن تم استخدام الدالة6 - 311G(d,p) لطيف UV - VIS. مجاميع الميثوكسي (OCH3) تاثيرها بسيط على المدارات الجزيئية. كذلك حسابات كل من الطاقة الكلية وطاقة اعلى مدار جزيئي ممتلئ وفجوة الطاقة اكدت ان الكيتون هو اكثر استقرارا من الاينول. وايضا الكيتون لديه قابلية عالية لقبول الالكترونات كما ثبت من خلال قيم كل من طاقة اوطا مدار جزيئي غير ممتلئ والكهروسالبية.من خلال نتائج طيف UV - VISتبين ان حزم الامتصاص تلاحظ في منطقة الاشعة فوق البنفسجية(UV). | The focus of the research for this thesis has been the calculation of the structural, electronic, thermal and spectroscopic properties of natural curcumin dye which exist in two isomers, ketone and enol forms, by using density functional theory (DFT) at B3LYP level with different basis sets. All calculations were performed with Gaussian 09 program and Gaussian view 5.0.8 program.The hydrogen atom transfer from the central methylene (CH2) group to oxygen atom to form intra - molecular hydrogen (O - H) bond causes geometrical changes in two isomers; where the enol form is structure approximately planar but not completely planar for the ketone form, this is due to the existence of the strong intra - molecular hydrogen. In addition to that the intra - molecular hydrogen also presence in benzene rings. Therefore leads to change the physical properties of two isomers.The results showed that the 6 - 311G+(d,p) basis set gave satisfactory results for calculations. But for UV - VIS spectral has been used the 6 - 311G(d,p) basis set. The methoxy groups (OCH3) have a small influence on the high occupied molecular orbital (HOMO) and the energy of lower unoccupied molecular orbital (LUMO). Also the findings of each of the total energy, the energy of the high occupied molecular orbital and energy gap confirms that the isomer ketone is more stable than to the isomer enol. Also the ketone has a high electron - accepting, as was proven by the values of the energy of lower unoccupied molecular orbital and electronegativity. Through the results of the UV - VIS spectral showed that the absorption peaks were seen at the UV region

استقصاء خصائص المفرق الهجيني Cd1 - xZnxS/Si للتطبيقات الفوتوفولتائية == Investigation of Cd1 - xZnxS/Si Heterojunction Properties for Photovoltaic Applications

Author name: رسل عبد الامير غازي مصحب
Supervisor name: ناهدة بخيت حسن
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Babylon
First pages:
Abstract: تم تحضير اغشيةCd1 - xZnxS باستخدام تقنية الرش الكيميائي الحراري وهي طريقة سهلة الاستخدام ومناسبة للترسيب على مساحات كبيرة . استخدمت خلات الكادميوم المائية كمصدر للحصول على الكادميوم وخلات الخارصين المائية كمصدر للحصول على الخارصين والثيوريا مصدر للحصول على الكبريتيد. تم تحضير مزيج الاغشية Cd1 - xZnxS بنسب حجمية مختلفة من (x) 0,0.2 ,0.4 ,0.6 ,0.8 ,1] [x= على قواعد زجاجية وسليكونية نظيفة ومسخنة عند درجة حرارة اساس 360) oC) وقد استخدم الهواء الجوي كغاز حامل . تم فحص التركيب البلوري للاغشية المحضرة بطريقة حيود الاشعة السينية ( XRD) واوضحت النتائج ان جميع الاغشية المحضرة كانت متعددة التبلور واظهرت تحسن البنية البلورية من حيث نقصان عدد القمم واختفاء بعضها وهذا مؤشر لتحسن خصائص الاغشية المحضرة. درست طبوغرافية الاسطح للاغشية المحضرة باستخدام مجهر القوى الذرية (AFM) والمجهر الالكتروني الماسح ) FESEM) ومبدد الطاقة للاشعة السينية (EDX) . الحجم الحبيبي للغشاء الرقيق Cd1 - xZnxS يزداد مع زيادة النسب الحجمية من (ZnS) . كذلك ان زيادة نسبة (ZnS) تؤدي الى زياده خشونة السطح، فحص (EDX) اظهر احتواء الاغشية على عناصر (Cd, Zn, S) كما هو متوقع ، مشيرا الى تشكيل اغشيه S Cd1 - x Znx عالية النقاوة. تم دراسة الخصائص البصرية للاغشية المحضرة بسمك (160 ± 3) nmباستخدام قياسات النفاذية البصرية في المنطقة الطيفي (300 - 1100) nm. نتائج النفاذية كانت اكبر من 94%. فجوة الطاقة المباشرة للــ (CdSpure) تساوي 2.61) eV) ، والتي تزداد مع زيادة النسب الحجمية من (ZnS) حيث ان فجوة الطاقة لل( (ZnSpureتساوي 3.41) eV) .الثوابت البصرية كمعامل الانكسار ومعامل الخمود وثوابت العزل تم حسابها لجميع الاغشية المحضرة. الخصائص الكهربائية مثل التوصيلية الكهربائية المستمرة وتاثير هول تم دراستها . اشارت النتائج ان الاغشية من النوع الموجب ( p - type ) وتمتلك طاقتي تنشيط ( Ea1,Ea2 )، وقد وجد ان التوصيلية الكهربائية المستمرة تقل مع زيادة نسب حجمية من (ZnS). قيست سعة الانحياز العكسي للمفرق الهجين Cd1 - x ZnxS /n - Si كدالة لفولتية الانحياز وبتردد (1) MHz ، وقد دلت هذه النتائج على ان المفرق من النوع الحاد، لوحظ نقصان السعة بزيادة جهد الانحياز العكسي كذلك تزداد السعة (334 - 577) pF مع زيادة النسب الحجمية من (ZnS) ، بينما يقل عرض منطقة النضوب مع زيادة النسب الحجمية من (ZnS) . ووجد ان جهد البناء الداخلي تقل قيمته من (0.7 - 0.27) Volt مع زيادة النسب الحجمية من (ZnS). بينت خواص تيار - فولتية للمفرق الهجين (CdS)1 - x (ZnS)x /n - Si بان تيار الظلام الامامي يتغير اسيا تقريبا مع فولتية الانحياز ويتفق المفرق المصنع مع نموذج اعادة الاتحاد - الانتفاق ويظهر الانحياز العكسي توقف طفيف ثم فولتية انهيار تدريجيا. كذلك يلاحظ تناقص عامل المثالية وتيار الاشباع مع زيادة النسب الحجمية من (ZnS). درست خواص تيار الدائرة القصير وفولتية الدائرة المفتوحة حيث وجدنا ان Jsc وVocتزداد قيمتهمزايادة النسب الحجمية من (ZnS) وقد فسر سبب ذلك بوجود تغير في التركيب للاغشية وكذلك تحسن طبقة التداخل بين p - (CdS)1 - x(ZnS)x وn - Si .درست الخصائص الطيفية للمفرق الهجين Cd1 - xZnxS /n - Si ووجدنا ان قيم الاستجابة الطيفية , الكشفية النوعية والكفاءة الكمية تقل وتزحف باتجاه الاطوال الموجية الطويلة مع زيادة نسب حجمية من (ZnS) ، بينما تزداد القدرة المكافئة للضوضاء مع زيادة النسب الحجمية من (ZnS). من خلال قياسات الخصائص التحسسية للاغشية الرقيقة لغاز ( NO2 ) اظهرت تحسسية جيدة عند حرارة تشغيل (100 - 200)oC ،ايضا تحسسيه الاغشية للغازات تقل بزياده تركيز ZnS عند oC (200) وان تغيير درجة حرارة التشغيل تؤدي الى تغيرات واضحة في تحسسية الاغشية. | Cd1 - xZnxS thin films were prepared by using a chemical spray pyrolysis technique, which is a simple, inexpensive and suitable technique for large deposition area.The cadmium acetate was used as a source of cadmium, the zinc acetate was used as a source of zinc and theoria was used as a source of sulfide. Mixed Cd1 - xZnxS thin films with different Vol.% of (x) (x= 0,0.2,0.4,0.6,0.8 and 1) has been prepared on clean glass and silicon substrate at 360 ºC with atmospheric air as the carrier gas. The crystal structures of the deposited films were examined by X - ray diffraction analysis. The results show that all the prepared films are polycrystalline structure,and it has shown improvement in the crystal structure in terms of decreasing the reflection peaks and disappearance of some peaks .This refers to the improvement in the properties of the films. The surface morphology of the deposits films has been studied by using atomic force microscope(AFM),Field emission scanning electron microscope (FESEM) and energy dispersive X - ray(EDX).The grain size of the Cd1 - xZnxS thin films increases with increasing of ZnS Vol.% , also the increasing ZnS Vol.% leads to increase in the surface roughness. (EDX) shows that all the films contain the elements (Cd, Zn and S) as expected, indicating formation of the Cd1 - xZnxS films with high purity films with good stoichiometry. The optical properties of the films, which were prepared with thickness of (160±3) nm,have been determined by using the optical transmittance measurements in the spectral region from (300 - 1100) nm. Transmittance results were upper than 94% and direct energy gap for (CdS pure) equal (2.61) eV, it increases with increasing ZnS of Vol.% where energy gap for (ZnS pure) equal (3.41)eV. The optical constants such as refractive index, extinction coefficient and dielectric constant have been calculated for all prepared films. The electrical properties include D.C conductivity and Hall effect were studied. The results show that the prepared films were p - type , and have two activation energies (Ea1 , Ea2).It is found that the electrical D.C conductivity decreases with the increase of the ZnS Vol.%. The reverse bias capacitance for p - Cd1 - xZnxS /n - Si heterojunction was measured as a function of bias voltage at frequency 1MHz, and we note that these heterojunction are abrupt. The capacitance decrease with increasing the reverse bias voltage, also it increases from (334 to 577) pF with increase of the ZnS Vol.%. while the depletion width decreases with increasing of the ZnS Vol.%. The value of built - in potential decreases from (0.7 to 0.27) Volt with increasing of the ZnS Vol.%. For p - Cd1 - xZnxS/n - Si heterojunction under dark conditions shows that forward bias current variation approximately exponentially with voltage bias.This conforms with tunneling - recombination model.The ideality factor and saturation current were calculated and notice the value decrease with increasing of the ZnS Vol.%. The short - circuit current density and open - circuit voltage have been studied, where the Jsc and Voc increases with increasing of the ZnS Vol.%. The spectral response of Cd1 - xZnxS/n - Si was studied. The values of responsivity, specific detectivity and quantum efficiency decreases and shifts to longer wavelength with increase of the ZnS Vol.%. While the noise equivalent power increases with increasing the ZnS Vol.%. From the sensing properties measurements of thin films show that films were good sensors for gas (NO2) at operation temperature (100 - 200) oC , also sensitivity of films for gases decreases with increases the concentration of ZnS at (200) oC. The variation of the operating temperature of the films have led to a significant change in the sensitivity of the sensor.

دراسة نظرية وعملية لمعالجة الصور الطبية باستخدام تقنية فورير == Theoretical and Experimental Study on Coherent Processing of Medical Image Using the Fourier Optical Technique

Author name: مروة كريم عبد
Supervisor name: رياض ناجي علي
General topic: Physics
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: في هذا البحث تم اعتماد نظرية الحيود وتحويلات فوريير (بصريات فوريير) في معالجة الصور عمليا (باستخدام نظرية بصريات فورير) كمعالج بصري , ونظريا (باستخدام برمجيات MATLAB ) . استخدمت في البداية اجسام قياسيه ذات اشكال هندسيه منتظمة ( المربع والدائرة) ذات دوال رياضيه بسيطة في النطاقين الحيزي spatial domain)) والترددي (frequency domain) وذلك لسهولة المقارنة بين نتائج المعالجتين العملية والنظرية. بعد ذلك تم استخدام عدد الصور, اغلبها طبيه كونها الغاية الاساسية للبحث, كاجسام في منظومة فوريير المختبرية لمعالجة المعطيات البصرية . كجزء من متطلبات معالجة الاشارة البصرية استخدمت ثلاثة انواع من مرشحات الاشارة البصرية لثلاثة انطقه حيزيه مختلفة (الترددات العالية, الواطئة, وحزمه تردديه متوسطة). بينت نتائج الدراسة افضليه وبساطه المعالجة النظرية , باستخدام برمجيات ماتلاب بالقياس الى استخدام منظومه فوريير المختبرية, وبالتالي امكانيه استخدام هذه البرمجيات, مع البرمجيات المستخدمة في تناول الصور في اجهزة التصوير الطبي المختلفة, لاغراض التشخيص الطبي المحوسب | In this thesis, the diffraction theory and the Fourier transforms technique (Fourier optics) are utilized to coherently process the optical data experimentally and theoretically, through implementing Matlab software. Two standard objects of regular geometry (rectangular, and circular aperture functions) are used as diffraction apertures. Then their Fourier transforms and inverse Fourier transforms are obtained experimentally (by using 2F - & 4F - set up optical processors), and then calculated theoretically using Matlab. Many complex objects are used, especially medical images (the targeted aim of this project), are implemented and processed using technique. Different special filters (low - pass, high - pass, and band - pass) are used to manifest the main processing features such as enhancement, smoothing and edge detection. The results of this project show the superiority and simplicity of the Matlab software in processing the complex images. This proves the capability of implementing Matlab software, together with the medical imaging system's handling software, in computerized medical identification and diagnosis

التراكيب الالكتروني بعض المعقدات المعدنية المختارة

Author name: فائق عبد الله محمد التميمي
Supervisor name: حامد ابراهيم عبود محمد التميمي
General topic: Physics
Specific topic: Electronics Physics
Degree: Doctorate
Language: English
University location: Babylon
First pages:
Abstract: The aim of the present work entitled " Electronic Structure of SomeSelected Metal Complexes " is to present a theoretical study based on thehybrid function of three parameters Lee - Yang - Parr B3LYP of the densityfunctional theory DFT quantum mechanical approach together with theStuttgart Dresden triple zeta SDD basis sets. All calculations are carried outby employing the used method at the Gaussian 09 package of programs.The studied metal complexes are twenty four divided into three groups : Platinum metal complexes, Vanadium metal complexes and Aluminummetal complexes. The electronic structure of the complexes includes thestructural, electronic, spectroscopic and excitation states properties.The results show that the SDD basis sets are efficient stronglysuggested for heavy metals and give good relax for the structures of thestudied metal complexes, where the geometrical parameters for cis - platinare in a good agreement with experimental results. Cis - platin has a largeabsolute value of chemical potential with low value of electrophilic index.Cis - platin has high ability to chemically interact with big molecules and ittakes place either in a clinical use or under clinical trials. Some platinummetal complexes and compounds have high symmetric distribution ofelectron density and electrostatic potential and others make variousbehaviors for electron transfer. Platinum metal complex isomers have thesame behavior of platinum centered compounds such as carboplatine andoxaliplatin used as drugs in clinical uses, where the ammine or bidentateammine ligands and either chlorides or carboxylate are leaving groups.The platinum metal complexes have high ability to interact with largemolecules due to their symmetric in the space and to participate either inclinical use or under clinical trials as agents. All platinum metal complexcompounds have electrophilic index greater than that for cis - platin and theyIIare soft compounds, they can easily interact with big soft molecules suchas enzymes or DeoxyriboNucleic Acid DNA.The results state that the vanadium metal complexes have low LUMOHOMOenergy gap and they are more biological activity. Moreover, theoxygen and chlorine atoms in vanadium metal complexes have an ability tointeract with the receptor reactive sites. The results of quantum chemicalparameters indicate that the vanadium metal complexes are soft and caneasily interact with enzymes. The results of nuclear magnetic resonancecalculations illustrate the central vanadium metal ion in all complexes thathave the lowest value of magnetic shielding and chlorine atoms whosemagnetic shielding values depend on the coordination for each complex.The molecular polarizability calculations showed that the vanadium metalcomplexes have chemical activity and high ability to interact with speciesespecially the enzymes in which they are soft big molecules. For aluminum metal complexes, the results reinforce that they have various electronic applications with different LUMO - HOMO energy gaps.The differences of the HOMOs and LUMOs energies distribution make the aluminum metal complexes to have chemical reactivity as Ziegler - Natta catalysts in the chemical applications such as polymerization processes.The results also prove that the electron density distribution is made from the aluminum metal complexes to have low electrophilic index in which they play a significant role as catalysts in many chemical reactions especially the polymerization processes.

المعالجة شبه الكلاسيكية والكمية لتفاعلات الاندماج والتفكك لبعض النوى الخفيفة والمتوسطة == Semiclassical and Quantum Treatment of Fusion and Breakup Reactions of some light and Medium Nuclei

Author name: مالك صالح محيميد الحمداني
Supervisor name: خالد حسين هاتف العطية | فؤاد عطية مجيد
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Babylon
First pages:
Abstract: في هذه الدراسة ، اجريت حسابات مقطع الاندماج الكلي σ_fus وتوزيع حاجز الاندماج D_fus واحتمالية الاندماج P_fus للانظمة 4He+233U، 6He + 64Zn ، He+209Bi6، 7Li+59Co،B+237Np11، C+48Ti13، 14N+59Co، N+54Fe15، 16O+46Ti، 18O+58Ni، 18O+60Ni، O+64Ni18، O+208Pb18، F+40Ca19، 27Al+45Sc، 30Si+64Ni، 37Cl+25Mg، 46Ti + 46Ti، Ti+60Ni50، 58Ni + 28Si، 58Ni + 54Fe، 58Ni+60Ni، 60Ni+100Mo . اجريت الحسابات باستخدام مقاربتين : اولا، المقاربة الشبه الكلاسيكية والتي تعتمد بالاساس على نظرية Alder وWinther والتي استعملت لتعالج التهيجات الكولومية للنويات والتي تسمى بطريقة اقتران القنوات للاستمرار المقطع (CDCC). الحسابات تم انجازها في حالة غياب وتضمين تاثيرات الاقتران. ان المقاربة شبه الكلاسيكية تستعمل تقريبWenzel وKramers وBrillouin (WKB) لمعالجة احتمالية الاندماج الكلاسيكية بينما الحركة الذاتية تمت معالجتها عن طريق معادلة شرودنكر المعتمدة على الزمن. ثانيا، المقاربة للميكانيك الكمي حيث تعاملنا مع المسالة مستخدمين حسابات الميكانيك الكمي الشاملة والتي انجزت الحسابات في حالة عدم تضمين تاثيرات الاقتران وكذلك مع الاخذ بنظر الاعتبار تاثيرات الاقتران.انجزت الحسابات باستعمال البرامج الحاسوبية SCF للحسابات الشبه كلاسيكية وQMCC لحسابات الميكانيك الكمي. البرنامج الحاسوبي SCF والذي كتب بالاصل من قبل H. D. Marta ومجموعته البحثية باستعمال لغة الفورتران ، بينما البرنامج الحاسوبي QMCC والذي كتب بالاصل من قبل L. F. Canto ومجموعته البحثية باستعمال لغة الفورتران. قمنا بتعديل هذه البرامجيات الحاسوبية لتاخذ بنظر الاعتبار الحركة النسبية بين الهدف والقذيفة. طريقة مربع كاي (chi - square) استعملت لايجاد مدى تقارب حساباتنا النظرية بالمقارنة من البيانات العملية الى جانب ذلك قمنا باضافة توزيع حاجز الاندماج ليحسب مباشرة من هذه البرامج. لقد كتب برنامج فرعي بلغة فورتران 90 لحساب توزيع حاجز الاندماج D_fus باستعمال طريقة الفرق بين ثلاث نقاط وهذا البرنامج الفرعي تم ربطة مع البرنامج الحاسوبي QMCCلكن في برنامج SCF اخذنا المشتقة الثانية لـ (Eσ_fus) حيث σ_fus هي بصيغة وونك.لقد قورنت حسابات مقطع الاندماج الكلي σ_fus وتوزيع حاجز الاندماج D_fus واحتمالية الاندماج P_fus باستعمال طريقة مربع كاي (chi - square) لكلا التقاربين الشبه الكلاسيكي والميكانيك الكمي الشامل وبكلتا الحالتين بغياب الاقتران وبوجود الاقتران مع البيانات العملية. قورنت الحسابات شبه كلاسيكية وحسابات الميكانيك الكمي الشاملة لمقطع الاندماج الكلي σ_fus وتوزيع حاجز الاندماج D_fus واحتمالية الاندماج P_fus مع البيانات العملية المتوفرة لكل نظام، وجد ان حسابات قنوات الاقتران للميكانيك الكمي في توافق اكثر مع البيانات العملية من الحسابات شبه الكلاسيكية لاغلب الانظمة قيد الدراسة. | In this study, the calculations of the total fusion cross section σ f us, the fusion barrier distribution Df us and the fusion probability Pf us, for the reactions4He+233U, 6He+64Zn, 6He+209Bi, 7Li+59Co, 11B+237Np, 13C+48Ti, 14N+59Co,15N+54Fe, 16O+46Ti, 18O+58Ni, 18O+60Ni, 18O+64Ni, 18O+208Pb, 19F+40Ca,27Al+45Sc, 30Si+64Ni, 37Cl+25Mg, 46Ti+46Ti, 50Ti+60Ni, 58Ni+28Si,58Ni+54Fe, 58Ni+60Ni, 60Ni+100Mo have been conducted. The calculations have been performed by using two approaches : Firstly, the semiclassical approach which based on Alder and Winther (AW) theory originally used to treat the Coulomb excitation of nuclei which is called Continuum - Discretized Coupled Channels (CDCC) method. The calculations have been preformed in the absence of coupling effects and in the case of the coupling effects were included. The semiclassical calculations used Wentzel, Kramers and Brillouin (WKB) approximation to treat the classical probability while the intrinsic dynamics is handled by the time - dependent Schrodinger equation.Secondly, the quantum mechanical approach, in which we treat the problem using the full quantum mechanical calculations. The calculations were performed in the case of no coupling included and with the coupling effects were taken into consideration.The calculations have been performed by using SCF code for semiclassical and QMCC code for quantum mechanical calculations. The SCF code is originally written by H. D. Marta and his collaborators using fortran language, while the QMCC code is originally written by L. F. Canto and his collaborators using fortran language. A sub - program has been written by Fortran 90 language to calculate the fusion barrier distribution Df us using the three - point - differencemethod. This sub - program has been implemented in both SCF and QMCCcodes.The calculations of the total fusion cross section σ f us, the fusion barrier distribution Df us and the fusion probability Pf us, have been compared by means of chi - square method for both semiclassical and quantum mechanical approaches in both no - coupling and coupling case with the corresponding experimental data. It is found that the quantum mechanical coupled channels calculations are in more agreement with the experimental data than the semiclassical calculations for most studied systems

تحضير ودراسة الخواص البصرية الخطية واللاخطية للوسط الفعال لليزر العشوائي == Preparation and Study a Linear and Nonlinear Optical Properties of Active Medium to Random Laser

Author name: ميثاق مطر مهدي خلف السلطاني
Supervisor name: جاسم محمد جاسم حسوني | ياسين حسن كاظم احمد
General topic: Physics
Degree: Doctorate
Language: English
University location: Babylon
First pages:
Abstract: يتكون الوسط الفعال لليزر العشوائي عادة من صبغة ليزرية مذابة في مذيب مناسب , بوليمر وجسيمات نانوية . استخدمت صبغة الرودامين ب Rhodamine B وصبغة ستايرل 9 م Styryl 9M الليزرية مذابتان في الكلوروفورم , بوليمر بولي مثيل ميتا اكريليت PMMA وجسيمات ثنائي اوكسيد التيتانيوم TiO2المايكروية , وجسيمات الفضة Ag , وجسيمات اوكسيد الخارصين النانوية ZnO , وجسيمات اوكسيد الحديد Fe3O4 النانوية , في تحضير الاوساط الفعالة لليزر العشوائي . درست خواص الامتصاص والفلورة الطيفية لصبغة Rhodamine B الليزرية في الايثانول مرة وفي الكلوروفورم مرة اخرى . درس تاثير نوع المذيب في الخصائص الطيفية ووجد ان مذيب الكلوروفورم هو مذيب مثالي بسبب خواص الامتصاص والفلورة المستحصلة عند استخدامها . درست الخواص الطيفية لبوليمر PMMA مذابا في الكلوروفورم وكذلك محاليل جسيمات TiO2 في الكلوروفورم بتراكيز مختلفة. درست خواص الامتصاص والفلورة الطيفية لمزيجات مختلفة بنسب مختلفة لكل من صبغة Rhodamine B الليزرية مذابة في الكلوروفورم , بوليمر PMMA وجسيمات TiO2 المايكروية , ووجد ان الجسيمات المايكروية وصبغة الليزر يعززان خصائص الامتصاص والفلورة . اضيفت جسيمات Ag , ZnO وFe3O4 النانوية الى مزيج (10 - 3 mol/l من صبغة Rhodamine B الليزرية في الكلوروفورم , 0.1 gm من بوليمر PMMA ) باوزان مختلفة .درست خواص الامتصاص والفلورة الطيفية لهذه المزيجات وقورنت مع تلك المزيجات المحضرة باستخدام صبغة Styryl 9M الليزرية . استنتج ان صبغة Rhodamine B تمتلك شدة فلورة اعلى من تلك في Styryl 9M .درست الخواص البصرية الخطية للمزيجات المحضرة اعتمادا على خصائص الامتصاص والفلورة الطيفية لهذه المزيجات . حضرت نماذج الاغشية الرقيقة لهذه المزيجات ودرست خصائص الامتصاص والفلورة الطيفية , الخواص البصرية الخطية لهذه الاغشية الرقيقة المحضرة .قيست الخواص البصرية اللاخطية لنماذج الاغشية الرقيقة باستخدام منظومة Z - scan ذات الفتحة المغلقة وذات الفتحة المفتوحة وتم الاستنتاج ان القيم العالية للوزن الجزيئي للجسيمات النانوية تزيد المقطع العرضي للاستطارة وهي السبب الرئيسي لتناقص النفاذية النسبية لهذه النماذج . تم استخدام منظومة مجهر المسح الالكتروني SEM لدراسة توزيع الجسيمات النانوية وحجم تجمعات الجسيمات النانوية العنقودية والمسافة بين تجمعين متجاورين . تم استخدام منظومة تحليل العناصر EDX لدراسة اوزان المكونات في نماذج الاغشية الرقيقة . اجريت فحوصات حيود الاشعة السينية XRD لنماذج الاغشية الرقيقة المحضرة ووجد ان الجسيمات النانوية تسبب اشارات حيود كثيفة . | The active medium for random laser is usually consists of laser dye dissolved in appropriate solvent , polymer and nanoparticles .The Rhodamine B and Styryl 9M laser dyes dissolved in chloroform , the PMMA polymer and the TiO2 microparticles , silver Ag , ZnO and Fe3O4 nanoparticles had been used in preparation of the active media for the random laser . The absorption and fluorescence spectral characteristics for the Rhodamine laser dye dissolved in ethanol in one time and in chloroform in other time . The effect of solvent type in the spectral characteristics had been studied and it is found that the chloroform solvent is the ideal one because of the highest absorption and fluorescence properties obtained when using it .The spectral properties for the PMMA polymer dissolved in chloroform and the solutions TiO2 microparticles in chloroform at different concentrations had been studied .The absorption and fluorescence spectral characteristics for the different mixtures of different concentrations of Rhodamine laser dye dissolved in chloroform ,PMMA polymer and TiO2 microparticles , had been studied and it has been found that the microparticles and the laser dye consolidate the absorption and fluorescence characteristics .The Ag , ZnO and Fe3O4 nanoparticles had been added to the mixture of (10 - 3 mol/l of Rhodamine B laser dye in chloroform ,0.1 gm of PMMA polymer ) at four different weights . The absorption and fluorescence spectral characteristics for these mixtures had been studied and compared with those mixtures prepared with the Styryl 9M laser dye .It can be concluded that the Rhodamine B has more fluorescence intensity than Styryl 9M. The linear optical properties for these prepared mixtures had been studied depending on the absorption and fluorescence spectral characteristics for these mixtures. The thin film samples of these liquid mixtures had been prepared . The nonlinear optical properties of thin film samples had been measured using Z - scan setup of closed aperture and open aperture and it can be concluded that the higher values of molecular weight of nanoparticles , increases the scattering cross - section which is the main reason to decrease the normalized transmittance for these samples. The SEM had been used to study the distribution of the nanoparticles and the size of the nanoparticles clusters and the distance between two adjacent clusters .The EDX analyzer had been used to study the weights of each component in thin film sample. The XRD had been taken for the prepared thin film samples and it can be found that the nanoparticles causes an intense diffraction signals. The absorption and fluorescence spectral characteristics , linear optical properties for these prepared thin films had been studied

تاثير تعداد الاضافة من جزيئات BaTiO3 النانوية على الخصائص الكهرو بصرية لبوليمر بلوري سائل جانبي السلسلة == Effect of BaTio3 Nanoparticles Amount Addition on Electro - Optical properties of side chain Liquid Crystal polymer

Author name: حوراء عبد الامير صالح الحسني
Supervisor name: خالد حسن بدر العمار
General topic: Physics
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: تضمنت الرسالة تاثير اضافة جسيمات تيتانات الباريوم BaTiO3 النانوية على الخصائص الكهرو - بصرية لمادة بوليميرية بلورية سائلة سايلوكسونية ذات سلسلة جانبية. استخدمت وزن جزيئي ثابت (1.7×〖10〗^6) وكانت نسب الاضافات خمس نسب مختلفة من المادة النانوية BaTiO3 ، ولوحظ ان فولتية التشغيل تقل مع زيادة نسبة المادة المضافة، وعند اقل قيمة للشدة نحصل على فولتية التوجيه التام . كما قيست ازمان الاستجابة البصرية (τ_on) في حالة الفتح (عند تسليط مجال كهربائي ) وزمن الغلق(τ_0ff) (عند ازالة المجال الكهربائي) وذلك من خلال حساب الفترة الزمنية بين التصفيف الابتدائي والتصفيف الجديد لجزيئات البوليمر البلوري السائل الحاصل بفعل المجال الكهربائي المسلط من ملاحظة التغير في شدة ضوء الليزر اثناء مروره بالخلية الكهروبصرية . كما وجد ان اضافة جسيمات BaTiO3 والتي كانت نسبتها مختلفة لوزن جزيئي واحد تؤدي الى زيادة كثافة المجموعة الميزوجينية المرتبطة بسلسلة البوليمر وهذا يؤدي الى زيادة اسهام عزم ثنائي القطب الكهربائي في مجموعة (C≡N) الموازية لمحور الجزيئة الطولي للوحدة الميزوجينية ، وكذلك يسهم في زيادة متباينة الخواص العزلية∆ ε (Dielectric anisotropy) وبالتالي نحصل على ازمان استجابة بصرية (τ_on) ،(τ_off) اقل ، وبذلك تتحسن الخواص الكهرو - بصرية للنظام . تم قياس التغير في فولتية العتبة عند خطوات ثابتة وتحت درجة الانتقال الطوري TNI لسلسلة من البوليمر ووجد ان الاضافات العالية للمادة المضافة تمتلك فولتية عتبة صغيرة وان هذا له علاقة بثابت مرونة البوليمر. تم استخدام قياسات مطياف الاشعة تحت الحمراء وذلك لتحديد معامل الترتيب التوجيهي للبلورات السائلة ذات السلسلة الجانبية. وبتحديد اهتزاز حزمة معينة (C≡N) لطيف الامتصاص فقد وجد ان معامل الترتيب التوجيهي يعتمد على درجة الحرارة . | The thesis included the effect of addition of BaTiO3 nanoparticles on the electro - optical properties of liquid crystalline polymers with side chain. A constant Molecular weight was used (1.7×〖10〗^6). The additive ratios were five different ratios of the added BaTiO3 nanoparticales. It was noted that the voltage operation decreased with the increase of the ratio of the additive. The optical response (τon) was measured in the case of the opening (when the electric field was applied) and the closing time (τ0ff) (when removing the electric field) by calculating the time interval between the primary and the new classification for liquid crystal polymer molecules caused by the electric field, Laser light while passing through the electrophoresis cell. The different addition ratio of BaTiO3 particles, which had a fixed molecular weight from polymer , increased the density of the mesogenetic group associated with the polymer chain. This increased the contribution of the dipole torque in the C ≡ N group parallel to the longitudinal axis of the mesogenous unit, The dielectric anisotropy Δ has a lower optical response time (τon), (τoff), thus improving the electro - optical properties of the system. The change in threshold voltage was measured at constant steps and under TNI for a series of different additives' and found that the high additive additives had a small threshold voltage and this had to do with the polymer elasticity constant. Infrared spectrometer measurements were used to determine the coefficient of the directional arrangement of liquid crystals with a side chain. By determining the vibration of a specific package (C ≡ N) for absorption, it was found that the coefficient of the guideline is based on the temperature.

استخدام طرق تقسيم مختلفة للكشف عن الاورام والشذوذ في الصور الطبية == Utilizing Different Segmentation Methods to Detect Tumors and Abnormalities inMedical Images

Author name: علا سعد خضير عبود
Supervisor name: رباب سعدون عبدون
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: من بين اخطر الامراض التي تؤدي الى الوفاة بين البشر هي الاورام, لذا فان الكشف السريع والدقيق عن هذه الاورام يعد مهمة حيوية, ان التشخيص الدقيق يعتمد على طرق محكمة والتي تنفذ لكشف مناطق الشذوذ في الصور الطبية قيد الفحص مثل : صور التصوير بالرنين المغناطيسي(MRI) والمسح المقطعي (CT) والماموغرام الرقمي وغيرها من انواع الصور الطبية. الهدف من هذه الدراسة هو تقديم تقنيات كفؤة ودقيقة لها القدرة لمعالجة وتقسيم صور طبية تعود لثلاث انماط مختلفة هي التصوير بالرنين المغناطيسي(MRI) والمسح المقطعي (CT) والماموغرام ولثلاثة اعضاء مختلفة هي الثدي والدماغ والكبد بالرغم من كون كل نمط من انماط التصوير الطبي له خصائصه الخاصة به من حيث طريقة الاستحصال وقدرة التفريق. بالاضافة الى ذلك, ان صور كل عضو بشري لها صفاتها الخاصة طبقا للانسجة والاجسام المتنوعة التي تعود له. لانجاز مهمة الكشف عن الاورام والشذوذ, عرضت في هذا العمل سبعة تقنيات تقسيم : العنقدة ذات الطريقة الحادة (K - means) والعنقدة ذات الطريقة المرنة (FCM) ومصفوفة الحدوث (التكرار) للمستويات الرمادية (GLCM) ومعادلة الرسم البياني(Histogram equalization) والتي تعتبر من طرق التحسين التي تعتمد على قيمة البكسل. اضافة الى ذلك ثلاث طرق هجينة مقترحة هي : K - means و; GLCM K - means وFCM وK - means K - ومعادلة الرسم البياني. لقد اوضحت النتائج ا ن هناك عدد عناقيد ملائم لتقسيم كل نوع من انواع الصور الطبية عند تطبيق طريقتي ال(K - means) و(FCM).ان طريقة معادلة الرسم البياني(Histogram equalization) والتي تستخدم عادة لاغراض تحسين الصور الرقمية ممكن تطبيقها وبسداد لتقسيم الصور الطبية ولاستخلاص مناطق الشذوذ فيها. علاوة على ذلك, عند تطبيق الطريقة الهجينة (K - means وFCM) ذات مرحلتي تقسيم قد ساعدت على اختزال زمن التنفيذ الطويل ليصبح صغيرا جدا والنسبة المؤية لاختزال الزمن وجدت انها تتراوح ما بين (0.16 - 0.03).من خلال نتائج كل التقنيات المقترحة تبين ان هذه الطرق جميعها قد نجحت في كشف وعزل واستخلاص مناطق الورم والشذوذ طبقا لاستشارة ثلاثة من اطباء الاشعة كما وان النتائج متوافقة وبشكل جيد مع تخطيط اطباء الاشعة الثلاثة | Among the most dangerous diseases that cause death among people are tumors, so fast and accurate detecting of these tumors are a vital task. The accurate diagnosis depends upon the robust methods that are implemented for detecting the tumor and abnormalities regions in the tested medical images like : MRI, CT scan, digital mammograms and other types of medical images.This study aims to present efficient and accurate techniques that capable to process and segment medical images of three different modalities are : mammography, Magnetic Resonance Imaging (MRI) and Computed Tomography (CT) images, and images of three different organs that studies here are : breast, brain and liver, although each medical imaging modality has its own characteristics of the acquisition approach and the resolution. As well as, each human organ image has its special properties according to the various tissues and objects that belong to. To achieve the tumors and abnormalities detection task, seven segmentation techniques are presented in this work : clustering hard scheme (K - means); clustering soft scheme (Fuzzy c - means, FCM); Gray level co - occurrence matrix (GLCM) and Histogram equalization which is one of the pixel - based enhancement methods. As well as three proposed hybrid methods : K - means and GLCM; K - means and FCM and K - means and histogram equalization.The results showed that there is an appropriate number of clusters that is suitable to cluster each type of medical images by implementing K - means and FCM. Histogram equalization techniques that is usually utilized for digital image enhancement, can be implemented ad equality to segmentation and to extract abnormalities regions.In addition applying hybrid methods (K - means and FCM) with two passes segmentation can reduced the long elapsed time to be very small, and the relative percent reduction of time became (0.03 - 0.16).From the results of all the proposed technique, these techniques succeed to detect, isolate and extract the tumor and abnormalities regions according to the consultation of three radiologist, and they are in good agreement with the delineation of radiologists.

المقاربات شبه الكلاسيكية والكمية لتفاعلات الاندماج النووي للانظمة المتوسطة == Semiclassical and Quantum Approaches of Nuclear Fusion Reactions for Medium Systems

Author name: مهند حسن متعب
Supervisor name: فـؤاد عطية مجيـد
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: في هذه الدراسة حسب المقطع الكلي للاندماج النووي σ_fus، وتوزيع حاجز الجهد الاندماجي D_fus للانظمة المتوسطة والتي تشمل (_ ^6)He+(_ ^64)Zn، (_ ^6)Li+(_ ^64)Ni ، (_ ^6)Li+(_ ^64)Zn، (_ ^7)Li+(_ ^64)Zn، (_ ^7)Be+(_ ^58)Ni، (_ ^13)C+(_ ^48)Ti، (_ ^19)F+(_ ^56)Feو (_ ^35)Cl+(_ ^26)Mg حيث اجريت هذه الحسابات باستخدام التقريبان : اولا، المقاربة الشبه الكلاسيكية تعتمد بالاساس على نظرية Alder وWinther والتي استعملت لتعالج التهيجات الكولومية للنويات والتي تسمى بطريقة اقتران القنوات للاستمرار المقطع (CDCC). الحسابات تم انجازها في حالة غياب وتضمين تاثيرات الاقتران. ان المقاربة شبه الكلاسيكية تستعمل تقريبWenzel وKramers وBrillouin (WKB) لمعالجة احتمالية الاندماج الكلاسيكية بينما الحركة الذاتية تمت معالجتها عن طريق معادلة شرودنكر المعتمدة على الزمن. ثانيا، المقاربة للميكانيك الكمي حيث تعاملنا مع المسالة مستخدمين حسابات الميكانيك الكمي الشاملة انجزت الحسابات في حالة عدم تضمين تاثيرات الاقتران وكذلك مع الاخذ بنظر الاعتبار تاثيرات الاقتران.انجزت الحسابات باستعمال البرامج الحاسوبية SCF للحسابات الشبه كلاسيكية وCC لحسابات الميكانيك الكمي. البرنامج الحاسوبي SCF والذي كتب بالاصل من قبل H. D. Marta ومجموعته البحثية باستعمال برنامج لغة الفورتران ، بينما البرنامج الحاسوبي CC والذي كتب بالاصل من قبل L. F. Canto ومجموعته البحثية باستعمال لغة الفورتران. قمنا بتعديل هذه البرامجيات الحاسوبية لتاخذ بنظر الاعتبار الحركة النسبية بين الهدف والقذيفة. طريقة مربع كاي (chi - square) استعملت لايجاد مدى تقارب حساباتنا النظرية بالمقارنة من البيانات العملية الى جانب ذلك قمنا باضافة توزيع حاجز الاندماج ليحسب مباشرة من هذه البرامج. تم استخراج توزيع حاجز الاندماج D_fus من البيانات العملية لمقطع تفاعل الاندماج الكلي σ_fusوطاقة مركز الكتلة باستعمال طريقة الفرق بين ثلاث نقاط. بنفس الطريقة قمنا بحساب توزيع حاجز الاندماج D_fus من النظرية.قورنت الحسابات شبه كلاسيكية وحسابات الميكانيك الكمي الشاملة لمقطع الاندماج الكلي σ_fus وتوزيع حاجز الاندماج D_fus مع البيانات العملية المتوفرة لكل نظام، وباستعمال طريقة مربع كاي الاحصائية (chi - square) وجد ان حسابات قنوات الاقتران للميكانيك الكمي في توافق افضل مع البيانات العملية من الحسابات شبه الكلاسيكية لاغلب الانظمة قيد الدراسة | In this study, the total fusion cross section σ_fus, and the fusion barrier distribution D_fus were calculated for the medium systems which are (_ ^6)He+(_ ^64)Zn, (_ ^6)Li+(_ ^64)Ni, (_ ^6)Li+(_ ^64)Zn, (_ ^7)Li+(_ ^64)Zn, (_ ^7)Be+(_ ^58)Ni, (_ ^13)C+(_ ^48)Ti, (_ ^19)F+(_ ^56)Fe and (_ ^35)Cl+(_ ^26)Mg. The calculations have been performed by using two approaches : Firstly, the semiclassical approach which based on Alder and Winther (AW) theory originally used to treat the Coulomb excitation of nuclei which is called Continuum - Discretized Coupled Channels (CDCC) method. The calculations have been preformed in the absence of coupling effects and in the case the coupling effects were included. The semiclassical calculations used Wentzel, Kramers and Brillouin (WKB) approximation to treat the classical probability while the intrinsic dynamics is handled by the time - dependent Schrodinger equation. Secondly, the quantum mechanical approach, in which we treat the problem using the full quantum mechanical calculations. The calculations were performed in the case of no coupling included and with the coupling effects were taken into consideration. The calculations have been performed by using SCF code for semiclassical and CC code for quantum mechanical calculations. The SCF code is originally written by H. D. Marta and his collaborators using fortran language, while the CC code is originally written by L. F. Canto and his collaborators using fortran language program. We had modified these codes to include the relative motion between the projectile and target. The chi - square method had been employed to find how close our theoretical calculations in comparison to the experimental data, besides we had also added the fusion barrier distribution to be calculated directly from these code.The fusion barrier distribution D_fus has been extracted from experimental data of the total fusion reaction cross section and the center of mass energy using the three - point difference method. In the same manner, we calculate the fusion barrier distribution D_fus from theory. The semiclassical and full quantum mechanical calculations of the total fusion cross section σ_fus and the fusion barrier distribution D_fus were compared with the available experimental data for each system, and by using statistical chi - square method, it is found that the quantum mechanical coupled channels calculations are in better agreement with the experimental data than the semiclassical calculations for most systems under study

تاثير الحجم الحبيبي لاسود الكاربون على الخواص الميكانيكية لمتراكبات البيوتادين == Effect of Carbon Black Particles Size on the Mechanical Properties of Butadiene Composites

Author name: علي نزال عواد
Supervisor name: سمير حسن هادي النصراوي
General topic: Physics
Degree: Higher Diploma
Language: English
University location: Babylon
First pages:
Abstract: في هذا البحث دراسة تاثير الحجم الحبيبي لاسود الكاربون (N326 , N375 , N660) على الخواص الميكانيكية ( الصلادة , قوة الشد, الاستطالة , معامل المرونة ,مقاومه التمزق) للمطاط الصناعي BRcis المعروف باسم بونا نظرا لتطبيقاته الواسعة وخاصة في صناعة الاطارات بسبب مقاومته العالية للاحتكاك .حيث تم تحضير وتصنيع عجنات مطاطية تتكون من المطاط الصناعي BRcis كمادة اساس . اما بالنسبة لمواد التقوية او المالئات Fillers فهي اسود الكاربونCarbon black (N326 , N375 , N660) . تضمن البحث تحضير 15 عجنة تكون فيها نسب المطاط الصناعي BRcis في كل عجنة (pphr (100ونسب اسود الكاربون (N326 ,N375 ,N660) كالاتي (0 ,10 ,20 ,30 ,40 ) PPhr لكل نوع من انواع اسود الكاربون.حيث اجريت جميع الفحوصات الميكانيكية كلا حسب ASTM الخاصة بها مثل الصلادة حسب المواصفة ASTM D1415 وكذلك قوة الشد وفقا لمعيار ASTM D412 ومقاومة التمزق باستخدام ASTM D624 واجريت الفحوصات بعد فلكنت العجنات . لقد اظهرت اختبارات الصلادة (Hardness) ان المطاط المدعم باسود الكاربون (N326) اكثر صلادة من النوعين (N375 , N660) . وكذلك اظهرت اختبارات معامل المرونة (Modulus of elasticity) والاستطالة (Elongation ( ان المطاط المدعم باسود الكاربون (N326) يكون اقل مرونة من النوعين (N660 ,N375)

حسابات عوامل التشكل النووية للاستطارة الالكترونية مع انموذج الفضاء الموسع sdpf لبعض النوى الخفيفة == Electron Scattering Form Factors Calculations with Extended sdpf Model Space for Some Light Nuclei

Author name: شامل راضي صاحب
Supervisor name: خالد صالح جاسم
General topic: Physics
Specific topic: Electronics Physics
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: The energy levels of 17,18O, 19F, 20Ne, 25,26Mg and 27Al nuclei have been calculated with the extended sdpf - model space . The calculations are performed with sdpfnow as effective interaction. There is good agreement between theoretical and experimental levels for most states. This study confirmed many levels in the 25,26Mg and 27Al nuclei Theoretically. Nuclear structure of the above nuclei except 26Mg have been studied by the elastic and inelastic electron scattering to calculate the form factors and reduced transition probabilities over the momentum transfer range (0 ≤q≤3) fm^( - 1). The wave functions for this nucleus have been utilized from the shell model using sdpfnow as a two - body effective interaction. The wave functions of the single - particle matrix elements were calculated by the Harmonic Oscillator (HO) and Skyrme (SK) potentials. The charge density distribution was calculated using the HO, Woods - Saxon (WS) and SK potentials for the 18O, 19F and 20Ne nucleus.The Core - polarization (CP) effects are used by adopting the shape of the Tassie - Model (TM) and effective charges, the effective charges employed for all states are 0.35 for each of proton and neutron except for 17,18O are 0.65.Two shell model codes NuShellX@MSU and NuShell@MSU for windows have been used in this study. The form factors for most nuclei under consideration give a good agreements compared with the experimental data. The calculations of effective charge model give a good agreement in the first maximum of momentum transfer regions (q) in all the nucleus except 17,18O, where it failed in describing the longitudinal form factors. The CP effects with TM give a good agreement for the two maximum of momentum transfer regions and it is better than the effective charge model for all the nuclei except C2〖(1/2〗_1^+ 1⁄(2)) state in the 27Al nucleus, where the effective charge model seems to agree more with the experimental data compared with TM.Transverse magnetic form factors calculations of 〖3/2〗_1^+ 1/2 state in the 19F nucleus are performed by adjusting the g - factors to be 8.2, - 2.1 for the proton and neutron, respectively, calculations of the 〖9/2〗_1^+ 1/2 state in the 19F nucleus also performed by adjusting the g - factors to be 6.58, - 2.82 for the proton and neutron, respectively. The comparison between fp and sdpf - models space have been performed with fpd6 and sdpfnow effective interactions, respectively, for the 54Cr and 54,56Fe nucleus

تحضير المتراكبات النانوية (بولي فينيل الكحول - نشا - اوكسيد المعدن) وتطبيقاتها == Preparation of (Polyvinyle Alcohol - Starch - Metal Oxide ) Nanocomposites and their applications

Author name: علي جاسم محمد الجنابي
Supervisor name: احمد هاشم محيسن اليساري
General topic: Physics
Specific topic: Physics
Degree: Higher Diploma
Language: English
University location: Babylon
First pages:
Abstract: تم تحضير المتراكبات النانوية (PVA - ST - Y2O3) و(PVA - ST - PbO2) بطريقة صب المحلول. وحضر الخليط البوليمري (PVA - ST)باستخدام نسب وزنية مختلفة هي بولي فينيل الكحول(85 wt.% و15 wt.%) .درس تاثير تراكيز الجسيمات النانويةY2O3 وPbO2 على الخواص البصرية والكهربائية (المستمرة والمتناوبة) للخليط البوليمري (PVA - ST) ولتطبيقها في تدريع اشعة كاما ومتحسسات للرطوبة والكهروضغطية . بينت النتائج التجريبية للخواص البصرية للمتراكبات النانوية ( PVA - ST - Y2O3) و(PVA - ST - PbO2) زيادة الامتصاصية، معامل الامتصاص، معامل الخمود، معامل الانكسار، ثوابت العزل الحقيقي والخيالي للخليط البوليمري (PVA - ST) بزيادة تراكيز الجسيمات النانوية Y2O3 و.PbO2 وان النفاذية وفجوة الطاقة يقلان بزيادة تراكيز الجسيمات النانويةY2O3 و. PbO2 تم قياس الخواص الكهربائية المستمرة للمتراكبات النانوية في درجات حرارة الغرفه. بينت النتائج ان التوصيلية الكهربائية المستمرة للخليط البوليمري (PVA - ST) ازدادت بزيادة تراكيز الجسيمات النانوية Y2O3 وPbO2درست الخواص الكهربائية المتناوبة في مدى تردد (100 - 5×106)Hz في درجة حرارة الغرفة. بينت النتائج التجريبية ان ثابت العزل الكهربائي وفقدان العزل الكهربائي للمتراكبات النانوية (( PVA - ST - Y2O3 و(PVA - ST - PbO2) يقلان بزيادة تردد المجال الكهربائي المسلط. وان التوصيلية الكهربائية المتناوبة ازدادت مع زيادة التردد. وزيادة ثابت العزل الكهربائي، فقدان العزل الكهربائي والتوصيلية الكهربائية المتناوبة للخليط البوليمري (PVA - ST) بزيادة تراكيز الجسيمات النانوية Y2O3وPbO2. ان معاملات التوهين لاشعة كاما ازدادت بزيادة تراكيز الجسيمات النانويةY2O3 وPbO2 وتعزى الى امتصاص وانعكاس اشعة كاما بواسطة المتراكبات النانوية (PVA - ST - Y2O3) و.(PVA - ST - PbO2) وبينت نتائج متحسسات الرطوبة ان المتراكبات النانوية (PVA - ST - Y2O3) و(PVA - ST - PbO2) تمتلك حساسية عالية للرطوبة.وبينت نتائج تتطبيقات الظاهره الكهروضغطيه ان المقاومه الكهربائيه للمتركبات النانويه (PVA - ST - Y2O3) و(PVA - ST - PbO2) تقل مع زياده الضغط | The (PVA - ST - Y2O3) and (PVA - ST - PbO2) nanocomposites have been prepared by solution cast method. The (PVA - ST) blend was prepared for different weight percentages of polyvinyl alcohol and starch (85 wt.% and 15 wt.%).The effect of Y2O3 and PbO2 nanoparticles concentrations on the optical properties and (D.C and A.C) electrical of (PVA - ST) blend has been studied for gamma ray shielding , humidity sensors and piezoelectric applications . The experimental results of optical properties for (PVA - ST - Y2O3) and (PVA - ST - PbO2) nanocomposites showed that the absorption, absorption coefficient, extinction coefficient, refractive index, real and imaginary dielectric constants of (PVA - ST) blend were increased with increase the Y2O3 and PbO2 nanoparticles concentrations. The transmittance and energy band gap were decreased with increase the Y2O3 and PbO2 nanoparticles concentrations. The D.C electrical properties of (PVA - ST - Y2O3) and (PVA - ST - PbO2) nanocomposites were measured at room temperature. The results showed that the D.C electrical conductivity of (PVA - ST) blend increases with increasing the Y2O3 and PbO2 nanoparticles concentrations. The A.C electrical properties of nanocomposites were studied in frequency ranging (100 - 5×106)Hz at room temperature. The experimental results showed that the dielectric constant and dielectric loss of (PVA - ST - Y2O3) and (PVA - ST - PbO2) nanocomposites were decreased with increasing the frequency of applied electric field and the A.C electrical conductivity increases with increasing the frequency. The dielectric constant, dielectric loss and A.C electrical conductivity of (PVA - ST - ) blend were increased with increasing the Y2O3 and PbO2 nanoparticles concentrations . The results of gamma ray shielding applications showed that the (PVA - ST - Y2O3) and (PVA - ST - PbO2) nanocomposites have high coefficients attenuation and the coefficients attenuation increase with increase the Y2O3 and PbO2 nanoparticles concentrations. The results of humidity sensors showed that ( PVA - ST - Y2O3) and (PVA - ST - PbO2) nanocomposites have higher sensitivity for humidity. The result of piezoelectric application showed .The electrical resistance of( PVA - ST - Y2O3) and (PVA - ST - PbO2) nanocomposites decreases with increase in pressure

تاثير زيادة زمن عمر البوزترون على تحليل طيفه الزمني == Effect of the Positron Lifetime Increasing on Analysis of its Spectrum

Author name: حامد جاسم محمد
Supervisor name: مهند حسين عليوي
General topic: Physics
Specific topic: Physics
Degree: Higher Diploma
Language: English
University location: Babylon
First pages:
Abstract: في هذه الدراسة تم دراسة تاثير المركبة القصيرة والمتوسطة والكبيرة لزمن عمر البوزترون على الطيف الزمني للبوزترون وايضا تاثيرها على دالة الانحلال للبوزترن. تم في هذه الدراسة تثبيت دالة الاستجابة الزمنية (دالة التحلل ) على قيمة 200PS لمعرفة مدى تاثيرها على مركبات زمن العمر للبوزترون عند هده القيمة.اثبتت الدراسات ان كلما زاد زمن عمر البوزترون فان دالة الانحلال ترتفع من الجهة اليمنى وتقترب من الشكل الخطي وكلما قلت قيمة زمن العمر فان تحليل الطيف الزمني للبوزترون يعطي قيم غير دقيقة . ايظا اثبتت الدراسة انه كلما زاد عدد مركبات زمن العمر فان الطيف الزمني للبوزترون يقترب من الشكل الخطي من جهته اليمنى. | In this work we study the effect of short ( 1 ), mid ( 2 ), and long lived (3 ) components of positron lifetime spectrum, also study the effects of lifetime components on decay function, also we fixed the time response function (resolution function ) on 200 ps, to know the effect of lifetime components. This study provided that as the lifetime component increase the decay function become more rise, and as the lifetime component decrease, the decomposition of spectrum become difficult. Also as number of lifetime increase, the spectrum approach to linear shape

الخواص التركيبية , البصرية والكهربائية خليط (بوليمري كاربيدات) وتطبيقاتها == Structural ,Optical and Elecrical Properties of (polymer - Blend - Carbides ) Nanocomposites and their Applications

Author name: قاسم هادي حسين الجبوري
Supervisor name: احمد هاشم محيسن اليساري
General topic: Physics
Degree: Higher Diploma
Language: English
University location: Babylon
First pages:
Abstract: حضرت المتراكبات النانوية ، (PVA - CMC - TiC) و(PVA - CMC - NbC) بطريقة صب المحلول. وحضر الخليط البوليمري(PVA - CMC) بنسب وزنية مختلفة هي بولي فينيل الكحول (50 wt.%)وكاربوكسيل مثيل السيليلوز(50 wt.%) .دراسة تاثير تراكيز الجسيمات النانويةTiC وNbCعلى الخواص الكهربائية (المستمرة والمتناوبة)و البصرية للخليط البوليمري(PVA - CMC)وتطبيقاتها في درع لاشعة كاما ومتحسسات للرطوبة. تم قياس الخواص الكهربائية المستمرة للمتراكبات النانوية في درجات حرارة مختلفة. بينت النتائج ان التوصيلية الكهربائية المستمرة للخليط البوليمر(PVA - CMC)ازدادت بزيادة تراكيز الجسيمات النانوية TiCوNbCودرجات الحرارة. درست الخواص الكهربائية المتناوبة في مدى تردد (100 - 5×106)Hz في درجة حرارة الغرفة. بينت النتائج التجريبية ان ثابت العزل الكهربائي وفقدان العزل الكهربائي للمتراكبات النانوية (( PVA - CMC - TiC و(PVA - CMC - NbC) يقلان بزيادة تردد المجال الكهربائي المسلط. وان التوصيلية الكهربائية المتناوبة ازدادت مع زيادة التردد. وزيادة ثابت العزل الكهربائي، فقدان العزل الكهربائي والتوصيلية الكهربائية المتناوبة للخليط البوليمري(PVA - CMC) بزيادة تراكيز الجسيمات النانوية TiCوNbC . بينت النتائج التجريبية للخواص البصرية للمتراكبات النانوية ( PVA - CMC - TiC) و(PVA - CMC - NbC) زيادة الامتصاصية، معامل الامتصاص، معامل الخمود، معامل الانكسار، ثوابت العزل الحقيقي والخيالي للخليط البوليمري(PVA - CMC) بزيادة تراكيز الجسيمات النانوية TiCو .NbC وان النفاذية وفجوة الطاقة يقلان بزيادة تراكيز الجسيمات النانويةTiC و.NbC والمتراكبات النانوية PVA - CMC - TiC)) و(PVA - CMC - NbC) تمتلك امتصاصية عالية في المنطقة فوق البنفسجية. بينت نتائج تطبيقات المتراكبات النانوية (PVA - CMC - TiC) و(PVA - CMC - NbC) , ان زمن التسخين والتبريد لخزن الطاقة الحرارية يقلان بزيادة تراكيز الجسيمات النانوية TiCوNbC .ان معاملات التوهين لاشعةكاما ازدادت بزيادة تراكيز الجسيمات النانويةTiC وNbC وتعزى الى امتصاص وانعكاس اشعة كاما بواسطة المتراكبات النانوية (PVA - CMC - TiC) و.(PVA - CMC - Nb كما بينت نتائج متحسسات الرطوبة ان المتراكبات النانوية (PVA - CMC - TiC) و(PVA - CMC - NbC) تمتلك حساسية عالية للرطوبة. كما بينت نتائج من تطبيق الكهروضغطية ان المقاومة الكهربائية المتراكبات النانوي PVA - CMC - NbC)( - PVA - CMC - TiC) ) تقل مع زيادة الضغط. | The preparation of (PVA - CMC - TiC) and (PVA - CMC - NbC) nanocomposites have been investigated by solution cast method. The (PVA - CMC) blend was prepared for different weight percentages are polyvinyl alcohol ( 50 wt.%) and carboxyl methyl cellulose (50 wt.%).The effect of Titanium carbides and Niobium carbide nanoparticles concentrations on the (D.C and A.C) electrical and optical of (PVA - CMC) blend has been studied for gamma ray shielding and humidity sensors and pizo - electric applications. The D.C electrical properties of (PVA - CMC - TiC) and (PVA - CMC - NbC) nanocomposites were measured at room temperature .The results show that the D.C electrical conductivity of (PVA - CMC) blend increases with increasing the TiC and NbC nanoparticles concentrations. The A.C electrical properties of nanocomposites were studied in frequency ranging (100 - 5×106)Hz at room temperature. The experimental results showed that the dielectric constant and dielectric loss of (PVA - CMC - TiC) and (PVA - CMC - NbC) nanocomposites were decreased with increasing the frequency of applied electric field. The A.C electrical conductivity increases with increasing the frequency. The dielectric constant, dielectric loss and A.C electrical conductivity of (PVA - CMC) blend were increased with increasing the TiC and NbC nanoparticles concentrations. The experimental results of optical properties for (PVA - CMC - TiC) and (PVA - CMC - NbC) nanocomposites showed that the absorbance, absorption coefficient, extinction coefficient, refractive index, real and imaginary dielectric constants of (PVA - CMC) blend were increased with increase the TiC and NbC nanoparticles concentrations. The transmittance and energy band gap were decreased with increase the TiC and NbCnanoparticles concentrations . The results of gamma ray shielding applications showed that the (PVA - CMC - TiC) and (PVA - CMC - NbC) nanocompsites have high attenuation coefficients . Also , the attenuation coefficients increase with increase the TiC and NbC nanoparticles concentrations. The result of humidity sensors showed that the (PVA - CMC - TiC) and (PVA - CMC - NbC) nanocomposites have higher sensitivity for humidity . The results of piezoelectric application showed that the electrical resistance of (PVA - CMC - TiC) and (PVA - CMC - NbC)nanocomposite decreases with increases in pressure

تاثير درجة الحرارة على الخصائص البصرية للبلورة السائلة 5PCH == Temperature Effect on Optical Properties of 5PCH Liquid Crystal

Author name: حاتم كريم حسين
Supervisor name: زيد عبد الزهرة حسن
General topic: Physics
Degree: Higher Diploma
Language: English
University location: Babylon
First pages:
Abstract: البلورات السائلة حالة من المادة تمتلك خصائص بين السائل التقليدي والبلورة الصلبة ، فعلى سبيل المثال ربما تنساب مثل السائل ولكن جزيئاتها تدور بطريقة مشابهة للبلورات. هنالك انواع مختلفة في الطور من البلورات السائلة ، في هذا البحث تم دراسة تاثير درجة الحرارة على البلورة السائلة النماتية من نوع (5PCH) وعند طول موجي (632.8 nm). اثبتت الدراسة التناسب الطردي بين درجة الحرارة وكل من الامتصاصية (A) , الانعكاسية (R) معامل الامتصاص (α) , معامل الخمود (K) من ناحية ومن جهة اخرى فان درجة الحرارة تتناسب تناسبا عكسيا مع النفاذية (T). | Liquid crystals are state of substance possesses characteristics between traditional liquid and crystallization. For example , perhaps liquid crystal away similar to the crystals. There are different types of crystal in the liquid phase. In this study, we used nematic liquid crystals type (5PCH) , and He - Ne laser with wavelength (632.8nm) to find the temperature effect on the optical properties .This study shows the direct proportionality between the temperature and the absorbance (A ), reflectance ( R ) , absorption coefficient ( α ), and the extinction coefficient ( k ), from one side and the indirect proportionality between the temperature with the transmittance ( T ) from another side .

معدل الجرعة الداخلية والخارجية للنشاط الاشعاعي الطبيعي في التربة من الاراضي الزراعية في ناحية ابي غرق == Internal and External Dose Rate for Natural Radioactivity in Soil from Agricultural Land in Abu Griq City

Author name: سيف محمد نعمة حنتوش
Supervisor name: محسن كاظم مطلب داغر الجنابي
General topic: Physics
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: الهدف من هذا البحث هو قياس النشاط الاشعاعي الطبيعي وتركيز غاز الرادون في تربة ناحية ابو غرق باستخدام كاشف يوديد الصوديوم وكاشف الحالة الصلبة RAD - 7. تم قياس مستويات النشاط الاشعاعي الطبيعي في 96 عينة من تربة ناحية ابو غرق لاربع اعماق مختلفة هي (0 - 5) سم و(5 - 25) سم و(25 - 50) سم والاخير (50 - 75)سم. ووجد ان النشاط الاشعاعي للبوتاسيوم والثوريوم واليورانيوم في النماذج المدروسة على التوالي هي (140±1.82 14.28±0.59 و8.50±0.47) بيكرل/كغم للعمق (0 - 5)سم. و(134.28±1.78 و13.64±0.59 و7.31±0.44) بيكرل/كغم للعمق (5 - 25)سم. و(127.36±1.73 و12.72±0.55 و6±0.419) بيكرل/كغم للعمق (25 - 50)سم. و(122.19±1.69 و12.59±0.56 و5.81±0.41) بيكرل/كغم للعمق (05 - 57)سم. تم حساب مكافئ الراديوم وكان بمعدل مقداره (39.92±8.19 و37.15±8.31 و33.99±7.85 و33.21±7.85) بيكرل/كغم للاعماق الاربعة على التوالي. اما معامل الخطورة الداخلي والخارجي للاعماق الاربعة على التوالي كانت بمعدل مقداره (±0.030.13،0.11±0.02 ) و(±0.030.12، ±0.020.10) و(±0.030.11 ، 0.09±0.02) و(±0.030.11 ، 0.09±0.02). اما قيم متوسط مؤشر المستويات التمثيلية (Iᵧ) للاعماق الاربعة على التوالي كانت (0.295±0.060) و(0.274±0.058) و(0.252±0.056) و(0.246±0.055). اما معدل قيم الجرعة الممتصة الداخلية والخارجية بوحدات نانوكري لكل ساعة وللاعماق الاربعة على التوالي كانت ( 35.12±7.23،18.76±3.88 ) و(±732.59،17.44±3.77 ) و(±6.6529.83،15.98±3.57 ) و(6.62 29.08±، 3.55±15.59). اما قيم معدل الجرعة الفعالة السنوية الداخلية والخارجية لنفس الاعماق الاربعة على التوالي بوحدة مللي سيفرت لكل سنة كانت على التوالي هي (0.006±0.172 ، 0.006 ±0.023) و(0.005±0.159 ، 0.001±0.021) و(0.005±0.146 ،0.001±0.020) و(0.026±0.143، 0.005±0.019). اما قيم معدل مخاطر الاصابة بالسرطان الزائد مدى الحياة الكلي للاعماق الاربعة على التوالي هي (0.20±0.65)×3 - 10 و(0.19±0.60) ×3 - 10 و(0.19±0.55) ×3 - 10 و(0.90±0.53) ×3 - 10وكانت نتائج هذه الدراسة ضمن الحدود المسموح بها عالميا حسب تقرير لجنة الامم المتحدة العلمية المعنية باثار الاشعاع الذري. اما تركيز غاز الرادون والثورون فقد تم قياسه في 26 موقع لعمقين مختلفين هما 50سم و100سم، وكانت تراكيز الرادون تتراوح بين(4.11±16.9) بيكرل/م3 الى (75.99±5775.5) بيكرل/م3 وبمعدل (26.62±973.658) بيكرل/م3 و(4.11±16.9) بيكرل/م3 الى(17.45±304.45) بيكرل/م3 وبمعدل (12.78±150.743) بيكرل/م3 للعمقين(50و100)سم على التوالي. اما تركيز غاز الثورون تراوحت بين (3.87±15) بيكرل/م3 الى (56.50±3192) بيكرل/م3 وبمعدل (5.18±155.41) بيكرل/م3 للعمق 50سم و(3.85±14.825) بيكرل/م3 الى (5.48±30) بيكرل/م3 وبمعدل (2.94±8.623) بيكرل/م3 للعمق 100سم على التوالي.ويمكن اعتبار نتائج تركيز الرادون اقل من الحد المسموح به، وفقا لتقرير لجنة الامم المتحدة العلمية المعنية باثار الاشعاع الذري (400 - 40000) بيكرل/م3، ويمكن اعتبار النماذج قيد الدراسة امنة اشعاعية | The aim of this study is to measure the natural radioactivity and the radon concentration in the soil samples of the Abu Girq area by using NaI(Tl) detector and the solid state detector RAD - 7. The levels of natural radioactivity were measured for 96 samples in Abu Girq district for four different depths (0 - 5) cm, (5 - 25) cm, (25 - 50) cm and the last (50 - 75) cm. The average specific activity of potassium - 40, thorium - 232 and uranium - 238 were (140±1.82, 14.28±0.59 and 8.50±0.47) Bq/kg in depth (0 - 5) cm, (134.28±1.78, 13.64±0.59 and 7.31±0.44) Bq/kg in depth (5 - 25) cm, (127.36 ±1.73, 12.72±0.55 and 6±0.419) Bq/kg in depth (25 - 50) cm, (122.19±1.69, 12.59±0.56 and 5.81±0.41) Bq/kg in depth (50 - 75) cm, respectively. The average of radium equivalent activity was (39.92±8.19, 37.15±8.31, 33.99±7.85, and 33.21±7.85) Bq/kg for the four depths respectively. The internal and external risk factors for the four depths respectively were )0.13±0.03, 0.11±0.02(, )0.12±0.03, 0.10±0.02(, (0.11±0.03, 0.09±0.02) and (0.11±0.03, 0.09±0.02). The average value of representative levels index of the four depths respectively were (0.295±0.060), (0.274±0.058), (0.252± 0.056), and (0.246±0.055). The average absorbed dose values (external and internal) were in (nGy/h) units and for the four depths respectively (18.76±3.88, 35.12±7.23 (, )17.44±3.77, 32.59±7), (15.98±3.57, 29.83±6.65), and (15.59±3.55, 29.08±6.62). Annual effective dose equivalent values (internal and external) for the same four depths respectively (0.172±0.006, 0.023±0.006) mSv/y, (0.159±0.005, 0.021±0.001) mSv/y, (0.146 ± 0.005, 0.020±0.001) mSv/y, and (0.143±0.026, 0.019±0.005) mSv/y. While the average value of lifetime risk of cancer from the four consecutive depths were (0.65±0.20)x10 - 3, (0.60±0.19)x10 - 3, (0.55±0.19)x10 - 3, (0.53±0.90)x10 - 3. The results of the study were within the permissible limits when compared with the values on UNSCEAR organization (412 for 40K, 35 for 238U, 45 for 232Th, 370 for Raeq, ˂1 for H(ex), ˂1 for H(in), 6 for Iγ, 59 for D(out), 84 for D(in), 0.07 for AEDE(out) and 0.4 for AEDE(in) ). The concentration of radon and thoron were measured in 26 sites with a depth of 50 cm and 100 cm, the radon concentrations ranged from (16.9±4.11) Bq/m3 to (5775.5±75.35) Bq/m3, with an average of (973.658±26.62) Bq/m3 and (16.9±4.11) Bq/m3 to (304.45±17.45) Bq/m3 and an average of (150.743±12.78) Bq/m3 for the depths (50 and 100 cm), respectively. While the concentration of the thoron ranged from (15±3.87) Bq/m3 to (3192±56.50) Bq/m3 with an average of (155.41±5.18) Bq/m3 and (14.825±3.85) Bq/m3 to (30±5.48) Bq/m3 and an average of (8.623±2.94) Bq/m3 for the depths (50 and 100 cm), respectively.Radon concentration results may be considered to be less than the permissible limit, according to the report of the United Nations Scientific Committee on the Effects of Atomic Radiation (400 to 40000) Bq/m3, and the models under study could be considered radiological safe.

تاثير الفلور على الخواص التركيبية الالكترونية والكهربائية لشريط الكرافين باستخدام النموذج الهاملتوني الرياضي == The Effect of Fluorine on the Structural, Electronic and Electrical Properties of Graphene Sheet by Using the Mathematical Hamiltonian Model

Author name: حكيمة سلمان جبر مرشد
Supervisor name: حامد ابراهيم عبود محمد التميمي
General topic: Physics
Specific topic: Electronics Physics
Degree: Doctorate
Language: English
University location: Babylon
First pages:
Abstract: هذه الاطروحة دراسة نظرية للخواص التركيبية, الالكترونية والكهربائية لشريحة الكرافين النقي باستعمال النموذج الهاملتوني الرياضي, وتحديد تاثير عدد مختلف من ذرات الفلور المضافة بدلا من ذرات الكاربون في الشريحة على تلك الخواص. ابتداءا تم الحصول على استرخاء للتراكيب المدروسة بتطبيق الدالة الهجينة ذات المعاملات الثلاث لي - يانغ - بار من نظرية دالة الكثافة في حزمة برامج كاوس 09 تم الحصول على استرخاء التراكيب بتطبيق تقريب الكثافة الموضعية في برنامج .SIESTA trunk - 462 ان جميع حسابات الخواص الكهربائية تم اجراؤها باستعمال برنامج .Gollum وتم الحصول على استرخاء جيد للتراكيب المدروسة, حيث ان قيم الزوايا C - C, C - C=C ,C=C في شريحة الكرافين النقية تتفق مع تلك في تراكيب الحلقات الكاربونية. ان اضافة ذرات الفلور بدلا من ذرات الكاربون لتشكيل الشرائح المطعمة ليس له تاثير واضح على تلك الزوايا مع ملاحظة التفاف طفيف في حلقات الفينيل عند مناطق الارتباط مع الحلقات المطعمة والتي سببهزاوايا انحناء بين الذرات المختلفة نتيجة لاختلاف الكتل الذرية والكهروسالبية لذرات الفلور والكاربون. تبين النتائج ان الطاقة الكلية لشرائح الكرافين المدروسة تتناقص مع زيادة العدد الكلي للالكترونات في الشريحة, ان الطاقة الكلية هي انعكاس لطاقة الترابط لكل شريحة. ان فجوة الطاقة المحسوبة نظريا لشريحة الكرافين النقية هي فجوة طاقة صفرية, وان جميع الشرائح المطعمة تمتلك فجوة طاقة صغيرة مع عدم وجود اي قاعدة لخفض او ارتفاع فجوة الطاقة مع زيادة عدد ذرات الفلور في الشريحة. ان حسابات المدار الجزيئي العلوي المشغول والمدار الجزيئي السفلي غير المشغول تبين ان طاقات المدار الجزيئي السفلي غير المشغول هي اعلى من طاقات المدار الجزيئي العلوي المشغول وهذا يعطي هذه التراكيب المدروسة ان تمتلك قابلية عالية لنقل الالكترون. كما ان طاقة المدار الجزيئي العلوي المشغول تزداد خطيا مع زيادة عدد ذرات الفلور في الشريحة. وبينت النتائج ان شريحة الكرافين النقي تمتلك قيم كبيرة للتوصيلية الكهربائية والحرارية مقارنة مع الشرائح المطعمة وذلك لكون الكرافين النقي يمتلك قنوات مفتوحة متعددة لنقل الالكترون, هذه القنوات تتناقص خطيا مع زيادة عدد ذرات الفلور في الشريحة. لقد لاحظنا ان شريحة الكرافين النقي هي اكثر مرونة من الشرائح المطعمة نتيجة العدد المحدد من الحالات والناشئ من كثافة الحالات غير الصفرية لشريحة الكرافين النقية, وهذا ياتي نتيجة للاختلاف في الاتحاد الخطي للمدارات الذرية لتشكيل مدارات جزيئية في كل من الشريحة النقية والشرائح المطعمة. ان شريحة الكرافين النقي تمتلك معامل انتقال قيمته واحد نتيجة لعدم وجود منطقة استطارة في شريحة الكرافين النقي, ان جميع موجة الالكترون الساقطة سوف تنتقل من القطب الايسر الى القطب الايمن, وان اضافة ذرات الفلور سيقود الى ظهور مساحات كمناطق استطارة تخفض معامل انتقال الالكترون. في الدراسة الحالية, تم تحليل قياسات تيار - فولتية للشرائح النقية والمطعمة, لقد لاحظنا ان شريحة الكرافين النقية تبين مميزات تيار - فولتية مشابهة بشكل كبير الى نوع الممانعة, وان هذا السلوك لمثل هذا التركيب النانوي يخفض تماما تاثيرات الحرارة العالية التي تظهر في الاجهزة الماكروية. ان الشرائح المطعمة تمتلك تقريبا منحني تيار - فولتية مشابهة بالسلوك الى الشريحة النقية مع استجابة واطئة للتيار المقابل لفولتية الانحياز الامامي والعكسي. | This dissertation is a theoretical study of structural, electronic and electrical properties of pure graphene sheets using a mathematical Hamiltonian model, and determine the effect of various number of fluorine atoms added in place of carbon atoms in the sheet on these properties. The studied structures are initially relaxed by employing the hybrid functional three parameter Lee - Yang - Parr B3LYP density functional theory at Gaussian 09 package of programs, and then the structures are relaxed by employing the local density approximation LDA/Single Zeta SZ at the SIESTA - trunk - 462 program. All calculations of electrical properties are carried out using Gollum program. The results showed good relaxation obtained for the studied structures, the values angles C - C, C=C and C - C=C in pure graphene sheet are agree with those for carbon rings structures. Adding the fluorine atoms in place of carbon atoms to form the doped sheets has not significant effect on these bonds with few screw observed in phenyl rings at the contact areas with the doped rings comes from the twist angles between different atoms due to the difference of atomic mass and electronegativity of fluorine and carbon atoms. The results showed the total energy of the studied graphene sheets was decreased with increasing the total number of electrons in the sheet, total energy is a reflection of, binding energy of each sheet. The LUMO - HOMO energy gap calculated theoretically for pure graphene sheet is zero energy gap, and the other doped sheets all have small energy gap with no role of reducing or raising the energy gap with increasing the number of fluorine atoms in the sheet. The calculations of HOMO and LUMO showed LUMO energies are greater than the HOMO energies and this gave these studied structures to have high ability to electron transfer. Also, the HOMO energy is linearly increasing with increase of the number of fluorine atoms in the sheet. The results showed the pure graphene sheet has the greater values of electrical and thermal conductivity than those for doped sheets due to that the pure graphene sheet has multi open channels for electron transfer, these channels are linearly reducing with increasing the number of fluorine atoms in the sheet . Observed the pure graphene sheet is more solvability than the doped sheets due to a finite number of states from the non - zero density of states for pure graphene sheet, this comes according to the difference in the linear combination of atomic orbitals to form the molecular orbital in both pure and doped sheets . Pure graphene sheet has transmission coefficient is unity due to absent of the scattering regions in pure graphene sheet. All incident electron wave function was transmitted from left electrode to right electrode, adding fluorine atoms leads to appearing areas as scattering regions reduces the electron transmission coefficient. In present study, the I - V measurements were analyzed for pure and doped sheets, observed the pure graphene sheet show I - V characteristics very much similar to resisting type, this behavior of such nano - structure material completely reduces the high temperature effect that appeared in the old macro devices. Doped sheets have approximately I - V curve similar to behavior pure sheet with low sensing of current corresponds to bias and reverse voltages

خصائص اغشية (SnO2) 1 - x (ZnO) x النانوية التركيب الرقيقة وتطبيقاتها == Characterizations of Nanostructure (SnO2)1 - x(ZnO)x Thin Films and Their Applications

Author name: زهراء عادل جواد المعموري
Supervisor name: ناهدة بخيت حسن
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Babylon
First pages:
Abstract: In this work, mixed (SnO2)1 - x(ZnO)x thin films were prepared by using ahomemade chemical spray pyrolysis technique, which was a simple, inexpensive and suitable technique for large deposition area. The Tin (II) Chloride Dihydrate SnCl2.2H2O was used as a source of tin oxide particles, and the zinc acetate dehydrate Zn(CH3COO)2.2H2O was used as a source of zinc particles. Mixed (SnO2)1 - x(ZnO)x thin films with different Vol.% of (x) [0,0.2,0.4,0.6,0.8,1] has been prepared on clean preheated glass and silicon substrate at 400 ºC with atmospheric air as the carrier gas. The crystal structures were examined by X - ray diffraction analysis. The result showed that all the prepared films were polycrystalline structure. It was observed that the granular size of the SnO2 membrane was greater than the granular size of ZnO the membrane, indicating that the ZnO membrane in the selected conditions was better crystallized. The surface morphology of the deposits films have been studied by using atomic force microscope (AFM), scanning electron microscope (SEM) and energy dispersive X - ray (EDX). The grain size of the (SnO2) nanoparticles observed at the surface depended on (x), which increase with increasing of ZnO Vol.%, also the increasing ZnO Vol.% lead to an increase in the surface roughness. (EDX) shows that all the films contain the elements (Sn, Zn and O) as expected, indicating formation of the (SnO2)1 - x(ZnO)x films with high purity. The optical properties of the films, which were prepared with thickness of (190 ± 3 nm), have been determined by using the optical transmittance measurements in the spectral region from 300 to 1100 nm. Transmittance results were upper than 95% which make these films suitable for sensor applications. Direct energy gap for (SnO2) equal 3.1 eV, it increases with increasing ZnO Vol.%. The optical constants such as refractive index, extinction coefficient and dielectric constant have been calculated for the prepared films. The electrical properties included D.C conductivity and Hall effect were studied. The results showed that the prepared films were n - type, and have two activation energies (Ea1 , Ea2). It was found that the electrical D.C conductivity increased with the increase of the ZnO Vol.%. The reverse bias capacitance for (SnO2)1 - x(ZnO)x/p - Si heterojunction was measured as a function of bias voltage at frequency 1MHz, and it was indicated that these heterojunction were abrupt. The capacitance increases with increasing the reverse bias voltage, also the capacitance increases from 185 pF to 314 pF with increase of the (x), while the depletion width decreasing with increasing (x). The value of built - in potential decreases from 0.9 to 0.3 Volt with increasing of the ZnO Vol.%. The electrical characteristics of the (SnO2)1 - x(ZnO)x/p - Si heterojunction have been studied, where current - voltage characterization under dark conditions showed that forward bias current variation approximately exponentially with voltage bias. This conforms with tunneling - recombination model, and reverse bias showed little stop and soft breakdown voltage. Also the product showed that current decreases with increasing Vol.% of (x). The efficiency and the fill factor of (SnO2)1 - x(ZnO)x/ p - Si of solar cell was measured. The calculations of the solar cell show that efficiency was the highest value when mixing where we observed a clear increase in efficiency ranging from (1.87 - 5). The fill factors of the devices for all types were in range of (0.25 - 0.454). The results showed that the efficiency of the solar cell is higher than its value at x = 0.8.From the sensing properties measurements of thin films for gas ( NO2 ) show that the films was good sensor to this gas at (25 - 200)oC. The best sensitivity of mixed thin films was 81% at x=1. The variation of the operating temperature of the films have led to a significant change in the sensitivity of the sensor with an ideal operating temperature.

تصنيع وخصائص متراكبات بولي فاينيل الكحول - كاربوكسي مثيل سليلوز اكاسيد المعادن النانوية كمؤثر للمضادات البكتيرية == Fabrication and Characterizations of PVA - CMC Metal Oxide Nanocomposites as Antibacterial Effect

Author name: قيصر مهدي جبر معارج الجبوري
Supervisor name: رحيم كعيد كاظم حسين المرشدي | مجيد علي حبيب راضي الخفاجي
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Babylon
First pages:
Abstract: في هذه الاطروحة تم تحضير نوعين من المتراكبات النانوية (PVA - CMC - ZnO) و(PVA - CMC - CuO) بطريقة صب المحلول. حضر الخليط البوليمري (بولي فينيل الكحول - كاربوكسي مثيل سليلوز) بتراكيز مختلفة من بولي فينيل الكحول (80 wt.%) وكاربوكسي مثيل سليلوز (20 wt.%) وكذلك تم اضافة اكاسيد الزنك واكاسيد النحاس النانوية للخليط البوليمري بنسب مئوية مختلفة وهي (3,6,9,12) . تمت دراسة تاثير كل من جسيمات اوكسيد الزنك واوكسيد النحاس النانوية على الخواص التركيبية والكهربائية (المستمرة والمتناوبة) والبصرية للخليط البوليمري (PVA - CMC) بتراكيز مختلفة. وتم تصنيع متحسسات الرطوبة ، مضادات البكتيريا ومواد كهروضغطية كتطبيقات.لقد اظهرت صور المجهر الضوئي وصور مجهر الماسح الالكتروني ان كل من اكاسيد الزنك النانوية واكاسيد النحاس النانوية تتوزع بشكل متجانس في الخليط البوليمري . واظهرت منحنيات تحويلات فورير للاشعة تحت الحمراء انه لا يوجد تفاعل كيميائي بين الخليط البوليمري والجسيمات النانوية المضافة. تم حساب الخواص الكهربائية المستمرة للمتراكبات النانوية لتراكيز ودرجات حرارة مختلفة.وقد بينت النتائج ان التوصيلية الكهربائية المستمرة للخليط البوليمري (PVA - CMC) ازدادت بزيادة تراكيز كل من اكاسيد الزنك النانوية واكاسيد النحاس النانوية ودرجات الحرارة.وقد تبين ان طاقة التنشيط قلت بزيادة تراكيز كل من اكاسيد الزنك النانوية واكاسيد النحاس النانوية. درست الخواص الكهربائية المتناوبة في مدى تردد (100Hz - 5MHz) في درجة حرارة الغرفة. اظهرت النتائج التجريبية ازياد كل من ثابت العزل الكهربائي وفقدان العزل الكهربائي والتوصيلية الكهربائية المتناوبة للخليط البوليمري (PVA - CMC) بزيادة تراكيز كل من اكاسيد الزنك النانوية واكاسيد النحاس النانوية.في حين يقل كل من ثابت العزل الكهربائي وفقدان العزل الكهربائي للمتراكبات النانوية (PVA - CMC - ZnO) و(PVA - CMC - CuO) بزيادة تردد المجال الكهربائي المسلط , كما تزداد التوصيلية الكهربائية المتناوبة بزيادة التردد. وقد بينت النتائج التجريبية للخواص البصرية للمتراكبات النانوية (PVA - CMC - ZnO) و(PVA - CMC - CuO) زيادة الامتصاصية ومعامل الامتصاص ومعامل الخمود ومعامل الانكسار وثوابت العزل الحقيقي والخيالي للخليط البوليمري (PVA - CMC) بزيادة تراكيزكل من اكاسيد الزنك النانوية واكاسيد النحاس النانوية. في حين تقل النفاذية وفجوة الطاقة للانتقال غير المباشر(المسموح والممنوع) بزيادة تراكيزكل من اكاسيد الزنك النانوية واكاسيد النحاس النانوية. لقد بينت نتائج تطبيقات متحسسات الرطوبة للمتراكبات النانوية (PVA - CMC - ZnO) و(PVA - CMC - CuO) ان المقاومة السطحية تقل بزيادة التراكيز المضافة والرطوبة النسبية. وكنتيجة لذلك، فانها تمتلك حساسية عالية للرطوبة. اختبرت المتراكبات النانوية (PVA - CMC - ZnO) و(PVA - CMC - CuO) كمضادات لبكتيريا موجبة غرام (المكورات العنقودية الذهبية) وسالبة غرام (الاشريشيا القولونية). اظهرت النتائج ان منطقة التثبيط تزداد بزيادة تراكيز كل من اكاسيد الزنك النانوية واكاسيد النحاس النانوية.كما بينت نتائج تطبيقات المواد الكهروضغطية للمتراكبات النانوية (PVA - CMC - ZnO) و(PVA - CMC - CuO) ان المقاومة الكهربائية تقل بزيادة التراكيز المضافة والحمل المطبق. وكنتيجة لذلك، فانها تمتلك حساسية عالية للاجهاد الميكانيكي. | In this thesis the two types of (polyvinyl alcohol - Carboxymethyl cellulose - Zinc oxide) and (polyvinyl alcohol - Carboxymethyl cellulose - Copper oxide) nanocomposites have been prepared by solution casting method. The (PVA - CMC) blend was prepared for different concentrations (80 wt.%)PVA and (20 wt.%) CMC as well Zinc oxide and Copper oxide nanoparticles (NPs) were added to (PVA - CMC) blend with different weight percentages as (3,6,9 and 12) wt.%.The effect of Zinc oxide and Copper oxide nanoparticles additives on structural, (D.C and A.C) electrical and optical properties of (PVA - CMC) blend have been studied. Humidity sensors, antibacterial activities and piezoelectric applications have been fabricated. Optical microscope and scanning electron microscope images indicate that the Zinc oxide and Copper oxide nanoparticles additives distribution was homogeneous in the blend. FT - IR indicate that no change on chemical structures between the blend and the additives.The D.C electrical properties of (PVA - CMC - ZnO) and (PVA - CMC - CuO) nanocomposites were investigated with different additive concentrations and temperatures. The results showed that D.C electrical conductivity of (PVA - CMC) blend increases with increasing of Zinc oxide and Copper oxide NPs concentrations and temperatures. The activation energy decreased with increased the concentration of the Zinc oxide and Copper oxide NPs. A.C electrical properties of these nanocomposites were studied in frequency range (100Hz - 5MHz) at room temperature. The experimental results showed that the dielectric constant, dielectric loss and A.C electrical conductivity of (PVA - CMC) blend increased with increasing the Zinc oxide and Copper oxide NPs concentrations. The dielectric constant and dielectric loss of (PVA - CMC - ZnO) and (PVA - CMC - CuO) nanocomposites decreased with increasing of the frequency of applied electric field, while A.C electrical conductivity increases with increasing of frequencies. The experimental results of optical properties for (PVA - CMC - ZnO) and (PVA - CMC - CuO) nanocomposites showed that the absorbance, absorption coefficient, extinction coefficient, refractive index, real and imaginary dielectric constants of (PVA - CMC) blend increased with increasing of the additive of Zinc oxide and Copper oxide NPs concentrations, while the transmittance and (allowed and forbidden ) energy gap decreased with increasing of the Zinc oxide and Copper oxide NPs concentrations. The results of applications for (PVA - CMC - ZnO) and (PVA - CMC - CuO) nanocomposites as humidity sensors showed that the surface resistance decreases with increasing of additive concentrations and relative humidity. As a result, humidity sensors have higher sensitivity for humidity. The antibacterial properties of the (PVA - CMC - ZnO) and (PVA - CMC - CuO) nanocomposites tested against gram - positive (S. aureus) and gram - negative (E. coli) bacterial. The results showed the inhibition zone increased with increasing of the concentrations of Zinc oxide and Copper oxide NPs. The results of applications for (PVA - CMC - ZnO) and (PVA - CMC - CuO) nanocomposites as piezoelectric showed that the electrical resistance decrease with increasing of additive concentrations and applied load. As a result, pressure sensors have higher sensitivity for mechanical stress.

تحضير متراكبات PANI - MWCNTs لتطبيقات الخلايا الشمسية == Preparation of PANI - MWCNTs composite for Solar Cells Applications

Author name: محمد سامي عبد علي خضير
Supervisor name: رحيم كعيد كاظم حسين المرشدي | محمد هادي شنين عبد علي
General topic: Physics
Specific topic: Solar Energy Physics
Degree: Doctorate
Language: English
University location: Babylon
First pages:
Abstract: في هذه الدراسة تم تحضير البولي انيلين بطريقة بلمرة الاضافة . وتم استخدام الانيلين هايدرو كلورايد مع بيرسلفت الامونيوم , حيث تم تفاعلهما معا لانتاج البولي انيلين . ومن ثم تم تشويب البوليمر بانابيب الكاربون النانوية المتعددة الجدران بالنسب ( 1% , 3% , 5% ) وتحضير اغشية رقيقة منهما , على قواعد من الزجاج والسليكون عند درجة حرارة الغرفة . اظهرت نتائج حيود الاشعة السينية ان الاغشية المحضرة هي ذات تركيب عشوائي , وان التشويب لم يؤثر على تركيب البولي انيلين كما تم تشخيص البوليمر المحضر والاغشية المحضرة منه بواسطة طيف الاشعة تحت الحمراء لمعرفة المجاميع الفعالة للاواصر الكيميائية , اظهرت نتائج التحليل ان البوليمر المحضر هو بولي انيلين حيث تم مقارنة النتائج وكانت مطابقة للمادة الاصلية . وتبين من الفحص ايضا ان التشويب لم يؤثر على خصائص البوليمر وان المادتين كان حضورهما معا وتم فحص طبوغرافية السطح للاغشية الرقيقة باستخدام تقنية مجهر القوة الذرية ( AFM) , واظهرت النتائج ان جميع الاغشية المحضرة ذات تجانس جيد وان معدل الخشونة وقيم مربع معدل الجذر ( RMS ) ومعدل الحجم الحبيبي تزداد مع زيادة التشويب بانابيب الكاربون النانوية (MWCNTS ) . تم دراسة الخصائص البصرية من خلال قياس طيف النفاذية كدالة للطول الموجي في مدى الطول الموجي ( 110 - 200 نانومتر ). اظهرت النتائج ان قيم الامتصاصية ومعامل الانكسار للاغشية النقية والمشوبة تزداد مع زيادة نسبة التشويب , وكذلك زيادة معامل الامتصاص مع زيادة نسبة التشويب وان فجوة الطاقة تقل مع زيادة نسبة التشويب مما يجعل المادة مناسبة لاستخدامها في تطبيقات الخلايا الشمسية . بالاضافة الى ذلك تم دراسة الخصائص الكهربائية والمتضمنة التوصيلية الكهربائية المستمرة وقياسات هول . اظهرت النتائج ان التوصيلية الكهربائية تزداد مع زيادة نسبة التشويب , وان المادة تمتلك طاقة تنشيط واحدة تقل مع زيادة نسبة التشويب , كما واظهرت نتائج قياسات تاثير هول ان المادة هي من النوع الموجب p - type .تم تحضير المفرق الهجين (PANI : MWCNTS/Si ) بتراكيز مختلفة وكتطبيق عملي على استخدامات المادة تم تصنيع خلية شمسية من اغشية المادة النقية والمشوبة. وتم دراسة كفاءة هذه الخلية حيث اظهرت النتائج ان الكفاءة تزداد مع زيادة نسبة التشويب , وان كفاءة الخلية الشمسية ولجميع النسب تكون ثابتة ولا تتاثر بتغير العامل الزمني حيث قيست الكفاءة لثلاثة اشهر مختلفة باختلاف درجات الحرارة . واظهرت خصائص ( التيار - الجهد ) للخلية الشمسية بان التشويب بانابيب الكاربون النانوية المتعددة الجدران يزيد من كفاءة الخلية الشمسية بواسطة عرقلة اتحاد الالكترون مع الفجوة وزيادة اداء النبيطة بسبب الزيادة العالية في تيار دائرة القصيرة ( Isc ) وفولتية الدائرة المفتوحة ( Voc) وقد وجد ان اعظم كفاءة كانت عند نسبة التشويب (% 5) وكانت قيمتها ( 5.7%) . كما وتم قياس الكفاءة مع تغير العامل الزمني لمعرفة مدى استقرارية كفاءة الخلية حيث تم قياس الكفاءة لثلاثة اشهر مختلفة ( 10 و12 و2 ) وقد وجد ان التغير الزمني لايؤثر على كفاءة الخلية الشمسية . كما وتم استخدام شدات متغيرة حيث قيست الكفاءة وبقية المتغيرات للشدات ( mW/cm2100 و50 و25 ) , وتبين ان كفاءة الخلية الشمسية تزداد مع نقصان شدة الضوء الساقط . | In this study, polyaniline was prepared by polymerization additive method . Aniline hydrochloride was used with ammonium persulfate and they are combined to produce polyaniline and then doping it with multi - walled carbon nanotubes with ratios ( 1% , 3% ,5% ), and preparation of thin films by spin coating technique on glass and silicon substrate at room temperature . The X - Ray diffraction (XRD) results showed that the prepared films are amorphous, the results showed that the doping did not affect on the synthetic properties of polyanyline. The prepared polymer and thin films prepared were analysized by (FT - IR) to determine the active groups of the chemical bonds, the results of the analysis showed that the polymer is polaniline where the results were compared and were identical to the original material , also showed that the doping did not affect the characteristics of polyaniline . The surface morphology of thin films was examined using the atomic force microscope technique (AFM). The results showed that the prepared were homogeneous.The roughness average, the Root Mean Square (RMS) value and the average grain size increased with the increasing of (MWCNTs) concentration. The optical properties of the prepared films, were investigated by obtaining the transmittance spectrums in the UV - VIS regions as a function of wavelength from 300 nm to 1100 nm. The values of absorbance and the refractive index for the of pure and doping films increasing with increasing of doping ratio . The energy gap decreasing with the increasing of the doping ratio , makes the material suitable for using application of solar cells . Electrical properties including D.C conductivity and Hall measurements of the films were studied.The results showed that electrical conductivity increasing with increasing the rate of doping , and that the material has one activation energy decreasing with increasing of doping ratio . The results of the Hall effect measurement showed that the materil was p - type . PANI : MWCNTS/Si heterojunctions have been prepared at different concentrations. (I - V) characteristics show that the MWCNTs - doping increases the energy conversion efficiency by retarding the electron - hole recombination and the improved device performance is caused by the high short - circuit current (Isc) and open circuit voltage (Voc) and found that the highest efficiency (η) at doping ratio 5% is 5.7% The efficiency of the solar cell was also studied and the efficiency of the time factor was measured. It was measured for three months (October, December and February) , found that efficiency increases with increasing the rate of doping and the change in the time factor does not affect on the efficiency of the cell. A variable intensity was used to measure efficiency (25, 50 and 100 mW /cm2). The efficiency of the solar cell was increased with the decreasing of light intensity for incident light.

موديل رياضي لحساب الجرعة الاشعاعية المستخدمة لعلاج الخلايا الخبيثة وتطوير معدل تحسين الحساسية بمساعدة الجسيمات النانوية == Mathematical Model for Calculating Radiation Dose used to Treat Malignant Cells and Improved SER with Aid of Nanoparticles

Author name: طالب عبد الرضا عبد الواحد
Supervisor name: نهاد عبد الامير صالح المعموري
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Babylon
First pages:
Abstract: Radiotherapy is one of the steps for cancer treatment, which involves using high energy photons produces from radioactive source or linear accelerator. Because of limited tolerance of human organs for radiation appears a need to enhance radiotherapy by increasing absorbed dose inside human target. One of the most promising methods currently used involving contrast agent like nanoparticles to enhance the radiation tolerance inside the tumor. Interaction between high energy photon (E> 1.022MeV) and nanoparticle inside specific organ produces electron and positron according to pair production. This thesis aims to create an enhancement in the cross section of the tumor cells by nanoparticles like gold nanoparticles, gadolinium nanoparticles, silver nanoparticles and titanium nanoparticles. The goal behind using nanoparticles is to increase the dose received by the tumor cells without increasing the dose received in surrounding healthy tissue.The importance of this method is to reduce the number of radiotherapy sessions (time) that are given to patients with cancer then result in reducing the side effects of radiation therapy. This is done by increasing sensitivity enhancement ratio (SER). SER is the ratio of survival cells to initial cells for irradiation without and with nanoparticles. The direct injection of nanoparticles into malignant tumor is considered a perfect method to increase (SER).Each gold, gadolinium, silver and titanium nanoparticles were used as radio - sensitizing agents to increase (SER), the greater number of malignant cells destroyed by radiation with the aid of nanoparticles produced the greater the amount of (SER). The contrast agent loaded to malignant tumor interacts with X - ray photons whose energy ranged from 2MeV to 20 MeV. This thesis recorded many SER depending on the typeof contrast agent and energy of X - ray. Each nanoparticle was irradiated with photons energy 2MeV, 4Mev, 6 MeV, 8 MeV, 10 MeV, 15 MeV, 20MeV, respectively. The same approach was applied with each of brain, breast, lung, prostate, and ovary tumors.™ The brain results showed an average enhancement in SER as follows : 11.63 when using TiNPs, 13.24 with using AgNPs, 13.72 with using GdNPs, 14.26 with using AuNPs. The breast shows average SER results as coming 10.79 to TiNPs, 12.45 to AgNPs, 12.95 to GdNPs finally 13.50 to AuNPs and average SER for lung as next 10.86 to TiNPs, 12.51to AgNPs, 13.03to GdNPs and 13.59to AuNPs. Average SER results of ovary as coming 10.85with TiNPs, 12.52 with AgNPs, 13.02 with GdNPs and 13.58 with AuNPs. Final average SER to prostate arranged as 10.83 to TiNPs, 12.47 to AgNPs, 12.93 to GdNPs finally 13.50 to AuNPs. From these results can be concluded higher SER response of organs to nanoparticles with high energy X - ray are arranged as follow in first degree AuNPs, secondly GdNPs, third AgNPs and finally TiNPs.

دراسة الخصائص الكهربائية والبصرية لجسيمات SnO2 وCuO النانوية مع خليط (PVA - PEG) == Study of Electrical and Optical Properties of SnO2 and CuO Nanoparticles with (PVA - PEG) Blend

Author name: نصير جبار حسين الكريطي
Supervisor name: بهاء حسين صالح ربيع المرعب
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: في هذه الدراسة تم تحضير نوعين من المتراكبات النانوية (PVA - PEG - SnO2) (PVA - PEG - CuO) باستخدام طريقة الصب وبتراكيز مختلفة من المضافات النانوية (ثنائي اوكسيد القصدير , اوكسيد النحاس) النانوي. وقد شخصت وفحصت الاغشية بطرق مختلفة مثل فحوصات المجهر الضوئي والتحليل الطيفي للاشعة تحت الحمراء (FTIR) وصور المجهر الالكتروني الماسح (SEM). اظهرت نتائج الفحص بواسطة صور المجهر الضوئي توزيع جسيمات ثنائي اوكسيد القصديرو اوكسيد النحاس النانوية لجميع اغشية المتراكب النانوي. حيث يظهر تكون شبكة مستمرة من الايونات داخل خليط البولمرعند النسبة (8wt.%). واظهرت نتائج فحوصات FTIR))ان جميع القمم لاغلب اواصر الامتصاصية تبقى في نفس موقع الاطوال الموجية. وقد تمت دراسة التغيرات الحاصلة للسطح لاغشية المتراكبات النانوية باستخدام صورالمجهر الالكتروني الماسح SEM)), والتي اظهرت ان اغشية المتراكبات النانوية تحتويان على العديد من الجسيمات الكروية او التكتلات التي تتوزع عشوائيا وتنتشر على السطح. وقد اظهرت النتائج ان المقاومة الكهربائية المستمرة للمتراكبات النانوية تكون ذات معامل حراري سالب, اي تقل المقاومة الكهربائية بزيادة درجة الحرارة. وان طاقة التنشيط تقل مع زيادة تراكيزجسيمات (ثنائي اوكسيد القصدير,اوكسيد النحاس) النانوية. اما في ما يتعلق بالخواص الكهربائية المتناوبة فان ثابت العزل والفقدان العزلي للمتراكبات النانوية يقلان مع زيادة تردد المجال الكهربائي المسلط ويزدادان مع زيادة تركيز جسيمات (ثنائي اوكسيد القصدير,اوكسيد النحاس) النانوية وكذلك اظهرت النتائج ان التوصيلية الكهربائية المتناوبة للمتراكبات النانوية تزداد بزيادة تراكيز جسيمات (ثنائي اوكسيد القصدير,اوكسيد النحاس) النانوية وتزداد عند الترددات الواطئة وتبقى ثابتة تقريبا عند الترددات العالية. اظهرت نتائج الخصائص البصرية للمتراكبات النانوية ان الامتصاصية تزداد بزيادة تركيزجسيمات ثنائي اوكسيد القصديرو اوكسيد النحاس النانوي .المتراكبات النانوية PVA - PEG - CuO) ) و(PVA - PEG - SnO2 ) ذات امتصاصية عالية في المنطقة فوق البنفسجية وامتصاصية قليلة في المنطقة المرئية والمنطقة تحت الحمراء , الانتقالات الالكترونية في هذه المتراكبات النانوية تكون غير مباشرة (مسموحة وممنوعة) , وان فجوات الطاقة غير المباشرة تقل بزيادة تراكيزجسيمات (ثنائي اوكسيد القصدير,اوكسيد النحاس) النانوية. ان معامل الانكسار ومعامل الخمود وثابت العزل (الجزء الحقيقي والخيالي) يزداد بزيادة تراكيز جسيمات (ثنائي اوكسيد القصدير,اوكسيد النحاس) النانوية. | In this study, two types of nanocomposites have been prepared : (PVA - PEG - SnO2) and (PVA - PEG - CuO) by using casting technique with different concentration of additives nanomaterial (tin dioxide ,copper oxide) nanoparticles .The examination results by photos optical microscope show distribution of tin dioxide, copper oxide nanoparticles atoms for all nanocomposites films, it also shows continuous network of ions inside the polymers blend at ratio (8 wt.%).The examination results (FTIR) showed that all peaks of the most bond remain in the same wave number. The morphology of the (PVA - PEG - SnO2) and(PVA - PEG - CuO) nanocomposites films have been studied using scanning electron microscope (SEM) images, which show that the nanocomposites films have many of spherical particles aggregates or chunks randomly distributed and spread on the surface. The obtained results show that the D.C electrical resistance of the nanocomposites has a negative thermal coefficient, i.e., it will be decreased with the increasing of the temperature .The activation energy decreases with increasing the concentration of the tin dioxide and copper oxide nanoparticles. The A.C electric properties show that the dielectric constant and dielectric loss of the nanocomposites decrease with increasing the frequency of applied electrical field and they increase with the increase of the concentration of the tin dioxide and copper oxide nanoparticles .The A.C electrical conductivity increases with increasing the concentration of tin dioxide and copper oxide nanoparticles,increases with the increase frequency, and almost constant at high frequency.The results of optical properties of the nanocomposites show the absorbance increase when increasing the concentration of tin dioxide and copper oxide nanoparticles. The (PVA - PEG - SnO2) and (PVA - PEG - CuO) nanocomposites have high absorbance in the (UV - Region) and low absorbance in the (Vis - Region) and (Inf - Region) ,the electronic transitions in these nanocomposites are indirect (allowed and forbidden), indirect energy gaps decrease with increasing the concentration of the tin dioxide and copper oxide nanoparticles.The refractive index , extinction coefficient , and the dielectric constant (real part and imaginary) increase with increasing the concentration of the tin dioxide and copper oxide nanoparticles.

تاثير جسيمات TiC النانوية على الخواص التركيبية والبصرية والكهربائية لمخاليط PVA - PAAm وتطبيقاتها == Effect of (TiC) Nanoparticles on Structural, Optical and Electrical Properties of (PVA - PAAm) Blends and their Applications

Author name: وليد هادي راضي اليساري
Supervisor name: مجيد علي حبيب الخفاجي
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: م تحضير المتراكبات النانوية (PVA - PAAm - TiC) بطريقة صب المحلول نسب وزنية مختلفة من الجسيمات TiC النانوية هي (2, 4, 6, and 8) نسبة وزنية. تم دراسة الخواص التركيبية والبصرية والكهربائية (المستمرة والمتناوبة) للمتراكبات النانوية. الخواص التركيبية تضمنت مطياف الاشعة تحت الحمراء FTIR , صور مجهر الالكتروني الماسح وصور المجهر الضوئي . نتائج الخواص التركيبية لطيف FTIR بينت ازاحة في موقع القمم وايضا تغير في الشكل والشدة مقارنة مع اغشية ( (PVA - PAAm النقية . صور المجهر الماسح الالكتروني والمجهر الضوئي بينت توزيع ذرات الجسيمات النانوية لكاربيد التيتانيوم داخل المخاليط البوليمر ( (PVA - PAAm. نتائج الخواص البصرية للمتراكبات النانوية (PVA - PAAm - TiC) بينت زيادة الامتصاصية، معامل الامتصاص، معامل الخمود، معامل الانكسار، ثوابت العزل الحقيقي والخيالي للخليط البوليمري ( (PVA - PAAm بزيادة تركيز الجسيمات TiC النانوية بينما النفاذية وفجوة الطاقة تقل بزيادة تركيز الجسيمات النانوية .TiC المتراكب النانوي (PVA - PAAm - TiC) تمتلك امتصاصية عالية في المنطقة فوق البنفسجية. نتائج الخواص الكهربائية المستمرة للمتراكب النانوي بينت بان التوصيلية الكهربائية المستمرة للخليط البوليمري ( (PVA - PAAm تزداد بزيادة تركيز الجسيمات النانوية TiC ودرجات الحرارة بينما طاقة التنشيط تقل بزيادة تركيز الجسيمات النانوية . TiC نتائج الخواص الكهربائية المتناوبة للمتراكبات النانوية بينت بان ثابت العزل الكهربائي وفقدان العزل الكهربائي للمتراكب النانوي (PVA - PAAm - TiC) يقل بزيادة تردد المجال الكهربائي المطبق وتزداد بزيادة تركيز الجسيمات النانوية TiC بينما التوصيلية الكهربائية المتناوبة تزداد مع زيادة تردد المجال الكهربائي المطبق والنسب الوزنية لجسيمات النانوية TiC . نتائج تطبيق المتراكب النانوي (PVA - PAAm - TiC)لخزن الطاقة الحرارية واسترجاعها بينت ان زمن التسخين والتبريد يقل بزيادة تراكيز الجسيمات TiC النانوية المضافة | The (PVA - PAAm - TiC) nanocomposites have been prepared by solution cast method with different weight percentages of titanium carbide nanoparticles are (2, 4, 6, and 8) wt.% . The structural, optical and (A.C and D.C ) electrical properties of nanocomposites have been studied. The structural properties includes Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM) and optical microscope. The results of structural properties for spectroscopy (FTIR) showed shift in peak position as well as the change in shape and intensity comparing with pure (PVA - PAAm) blend. The scanning electron microscope (SEM) and optical microscope images showed distribution of titanium carbide nanoparticles inside (PVA - PAAm) blend .The results of optical properties for (PVA - PAAm - TiC) nanocomposites showed that the absorbance, absorption coefficient, extinction coefficient, refractive index, real and imaginary dielectric constants of (PVA - PAAm) blend were increased with increase the TiC nanoparticles concentrations while the transmittance and energy band gap were decreased with increase the TiC nanoparticles concentrations. The (PVA - PAAm - TiC) nanocomposites have high absorbance in the UV - region. The results of D.C electrical properties of nanocomposites shows that the D.C electrical conductivity of (PVA - PAAm) blend increases with increasing the TiC nanoparticles concentrations and temperature while activation energy decreases with increasing the concentration of the TiC nanoparticles. The results A.C electrical properties of nanocomposites showed that the dielectric constant and dielectric loss of (PVA - PAAm - TiC) nanocomposites were decreased with increasing the frequency of applied electric field and increased with increasing the TiC nanoparticles concentrations while the A.C electrical conductivity increases with increasing the frequency of applied electric field and concentrations of the TiC nanoparticles. The results for thermal energy storage and release application for (PVA - PAAm - TiC) nanocomposites showed that the heating and cooling time for decreased with adding TiC nanoparticles concentrations

تاثير التقوية بالسليكا النانوية المصنعة محليا على الخواص الميكانيكية لعجنة الجدار الجانبي للاطار == Reinforcement Effect of Nano Silica Locally Manufactured on Mechanical properties of Side wall Tire Batch

Author name: علي خليف كتاب
Supervisor name: سمير حسن هادي النصراوي | محمد حمزة دحام المعموري
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: تم تحضير سليكا نانوية بواسطة الترسيب من ماء الزجاج باضافة حامض الهيدروكلوريك. اكدت العديد من الفحوصات على السليكا النانوية مثل ]المجهر الالكتروني الماسح (SEM) ، التحليل الكيميائي بالاشعة السينية XRD))[. واظهرت نتائج الاختبارات بان السليكا النانوية الناتجة ذات اشكال كروية غير منتظمة بمساحة سطحية عالية مع حجوم تقريبية اقل من 100nm بالتحديد في مدى (75 - 90) nm وهذا ما اكده فحص المجهر الالكتروني الماسح (SEM)والتحليل الكيميائي بالاشعة السينية (XRD). بالاضافة الى نقاوة السليكا بنسبة 100% وكثافة cm3/0.3511g وتركيب شبه متبلور عند الزاوية (2θ = 21°) والتي حصل عليها من فحص الاشعة السينية وبعد تحسينها بخلطها مع عامل الربط(APTS) ظهرت بيكات بلورية. السليكا النانوية استخدمت كمواد مدعمة اضيفت بالنسب المئوية (0.02,0.04,0.06,0.08,0.1,0.2,0.4,0.6,0.8,1)pphr الى عجنه المطاط المتكونة من مطاط طبيعي(RSS) ومطاط ستايرين بيوتاديين مع ثبوت افضل نسبة من اسود الكاربون (.(50pphr للحصول على خليط مثالي من السليكا النانوية مع المطاط، يضاف عامل الربط (APTS) بنفس نسبة السليكا النانوية المضافة، والتي تحمي سطح السليكا القطبية من جهة ويتفاعل مع ارضية المطاط من جهة اخرى. للتحقق من تاثير السليكا النانوية على تحسين الخواص الميكانيكية لعجنه الجدار الجانبي للاطار تم اجراء الفحوصات التالية (قوة الشد، معامل المرونة, الاستطالة، مقاومة التمزق, الصلادة, الارتدادية, الانضغاطية، ، الوزن النوعي ,سلوك الكلال). اوضحت النتائج بانه عند اضافة السليكا النانوية الغير المحسنة والسليكا النانوية المحسنة، تظهر زيادة في قوة الشد، معامل المرونة, مقاومة التمزق ، حيث تصل الى 19.5MPa, 13.96 Mpa, 7.50 Mpaعلى التوالي عند 0.1 pphrمن السليكا النانوية غير المحسنة والسليكا النانوية المحسنة. ولكن تقلل من الاستطالة مع اضافة بنفس نسب السليكا النانوية غير المحسنة والسليكا النانوية المحسنة. كل اضافة من السليكا النانوية غير المحسنة والسليكا النانوية المحسنة هي بمثابة مالئ يزيد من تماسك العجنه المرنة، وبالتالي فان خواص الصلادة، الوزن النوعي ستزداد عند0.02pphr من السليكا ، تزداد الارتدادية عند 0.02pphr من السليكا ثم تبدا في الانخفاض مع زيادة الدقائق النانوية الى 0.04 pphr من السليكا. تزداد الانضغاطية عند 0.02pphr من السليكا ثم تبدا بالانخفاض مع زيادة الدقائق النانوية الى 0.04 pphr من السليكا. تزداد مقاومة نمو الشق حتى 1783cycle ، وكلمزاادت كمية السليكا الى اكبر من 0.04 pphr ينتج زيادة الاجهادات في العجنه مما يخلق عيوب او تشققات. ولكن نلاحظ من خلال النتائج بان عند اضافة السليكا النانوية المحسنة حصول تحسن واضح في الخواص الميكانيكية جيدة لعجنه الجدار الجانبي للاطار | This is done by precipitation from water glass by adding hydrochloric acid. Many tests are several on the nano silica such as the (XRD, SEM). The results of the tests nano silica prepared that it forms a spherical irregular, which has a high surface area of roughly sizes less than 100 nm exactly in the range of (75 - 90)nm are confirmed by SEM .With purity of silica is 100% and density of 0.3511 g/cm3.sems - amorphous structure at (2θ = 21° ) is obtained by XRD and after being modified by a coupling agent (APTS) a crystalline peak appears. Nano silica which is used as filler using percentages of (0.02,0.04,0.06,0.08,0.1,0.2,0.4,0.6,0.8,1)pphr to the rubber recipe consisting of styrene butadiene rubber(SBR)/ Natural Rubber(RSS) with the optimum constant percent of carbon black (50pphr). Get a perfect blend of nano silica with rubber, it was added modified nano silica worker couplings on the same percentage of nano silica, which protects the surface of the polar silica and reacts with the rubber matrix. Achieve the effect of nano - silica on the mechanical properties of the side wall tires (Tensile strength, Elongation, elastic modulus, tear resistance, Sp. Gravity, compression, hardness, fatigue, Resilience) are Required. The results showed that the addition of modified no nano silica and modified nano silica, an increase in tensile strength, modulus of elasticity and tear resistance values up to 19.5Mpa,13.96Mpa and 7.50Mpa respectively at 1 pphr of modified nano silica . the elongation properties decreased by the addition of modified no nano silica and modified nano silica . Each percent of the addition of silica nano and modified nano silica act as a filler and it increases the hardness and elastic recipe, and then concluded that the hardness properties, specific gravity properties will increase. At 0.02 pphr of nano silica, increase in the resilience appear then begins to decrease with nanoparticals increase to 0.04 pphr. At 0.02 pphr of silica and an increase in the compression starts after that to decrease with nanoparticals increase to 0.04 pphr but at the addition amounts 0.1 pphr of modified nano silica give the good compression loss. At 0.8pphr of nano silica increase the resistance to crack growth up to 1783 cycles. As the amount of increase result in increased pressure in the recipe which creates cracks . However, we can see from the results that when adding the modified nano silica by the addition of the(APTS), we notice a clear improvement in the mechanical properties of the kneading of the side wall batch.

خصائص اغشية اوكسيد الرصاص (PbO) الرقيقة المبخرة حراريا في الفراغ == Characterization of Thermal Vacuum Evaporation Lead Oxide (PbO) Thin Films

Author name: امين علوان محيميد البومنصور
Supervisor name: فؤاد شاكر هاشم الجبوري
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: في هذه الدراسة رسبت الاغشية الرقيقة لاوكسيد الرصاص على ارضية زجاجية نظيفة غير مسخنه بتقنية التبخر الحراري تحت ضغط 1×10 - 7 ملي بار بمعدل ترسيب 0.7 نانومتر/ثانية بسماك مختلفة تراوحت 200 ,130 ,60 ±5 نانومتر عند درجات حرارة تلدين مختلفة 523 ,623, 723كلفن لمدة ساعتين. اظهرت نتائج حيود الاشعة السينية بان الاغشية الرقيقة لاوكسيد الرصاص ذات طبيعة غير متبلورة قبل التلدين. فيما اظهرت انماط الحيود بعد التلدين اغشية متعددة التبلور فتكون من مزيج α - PbO)) رباعي قائم و(β - PbO) معيني قائم باتجاه مفضل للمستوي (020).اثبتت فحوصات مجهر القوى الذرية بان اغشية اوكسيد الرصاص ذات سطوح متجانسة بصورة جيدة. وجد ان معدل الحجم الحبيبي المستنبط من بيانات حيود الاشعة السينية يزداد بزيادة درجة حرارة التلدين لكل السماك كما اظهرت انها بقيم اصغر من ذات النتائج وفقا لقياسات مجهر القوى الذرية. بينت نتائج الخصائص البصرية بان النفاذية تقل بزيادة درجة حرارة التلدين لكل السماك. ان اغشية اوكسيد الرصاص لاقل سمك 60 نانومتر الملدنه عند 523 كلفن لمدة ساعتين تمتلك نفاذية جيدة تتجاوز 93% في طيف المنطقة تحت الحمراء , لكن قلت مع زيادة درجة حرارة التلدين لتصل85% بينما كانت اغشية اوكسيد الرصاص للسمكين 130 و200 نانومتر الملدنه عند 523 كلفن لمدة ساعتين تمتلك نفاذية 91% و89% في المنطقة تحت الحمراء, لكنها تتناقص مع زيادة درجة حرارة التلدين لتصل 85% و. 87%النفاذية العالية في المنطقة تحت الحمراء تشير الى ان اغشية اوكسيد الرصاص هي مواد جيدة في تطبيقات الزراعة. كل اغشية اوكسيد الرصاص المرسبة اظهرت انتقالات مباشرة وفجوة الطاقة تقل بزيادة درجة حرارة التلدين التي تتراوح بالقيم (3.79, 3.60 , 3.49 eV) (3.52 0, 3.32, 3.140 eV) , (3.59, 3.295, 3.165 eV)للسماك,130 ,60 200 ±5 نانومتر على التوالي. وقد تم حساب الثوابت البصرية مثل معامل الامتصاص ومعامل الانكسار ومعامل التمدد وثابت العزل الحقيقي والتخيلي والتوصيلية البصرية. كما درست الخصائص الكهربائية للاغشية الرقيقة لاوكسيد الرصاص المحضرة ووجدت انها اشباه موصلات من نوع n - typeووجد ان تركيز حاملات الشحنة (n) والتوصيلية الكهربائية تزداد بزيادة درجة حرارة التلدين, بينما التحركية والمقاومية تقل بزيادة درجة حرارة التلدين .التوصيلية الكهربائية تزداد بصورة اسية بزيادة درجة حرارة التلدين. واظهرت النتائج كل الاغشية تمتلك طاقتين تنشيط وهذه الطاقة تتناقص مع زيادة درجة حرارة التلدين | In this research, Lead (II) monoxide (PbO) thin films deposit on unheated cleaned glass substrates, by thermal evaporation technique under pressure of 1×10 - 7 mbar and rate of deposition 0.7 nm.s - 1 , with different thickness consistently 60,130 and 200 ±5 nm at different annealing temperature 523,623 and 723 K for 2 hr. The X - ray diffraction (XRD) results indicate that the PbO films before annealing are in amorphous nature. The diffraction patterns corresponding after annealing reveal that the films crystallize in polycrystalline mixed compounds of Tetragonal α - PbO and Orthorhombic β - PbO. Atomic force microscope (AFM) confirmes that the PbO films have high homogeneous surface. The average crystallite size is estimated from XRD data that is increased with increasing annealing temperature for all thickness, and shown that it is smaller than that from AFM data. The optical properties results show that the transmittance decreases with increasing annealing temperature for all thicknesses. PbO film shows at the lower thickness 60nm which annealed at 523K for 2hr possesses transmittance that exceeds 93% in the IR radiation region of spectrum, but it decreases with increasing annealing temperatures to reach 85%,while PbO films of thicknesses 130nm, and 200nm annealed at 523K for 2hr possesses a transmittance 91% and 89% in the IR region, but it decreases with increasing annealing temperatures to reach 85% and 87%. The high transmittance in the IR region indicates that PbO films are good materials for application in agriculture. All deposited PbO thin films show directly allowed transitions and the optical energy gap decreased with increasing annealing temperature, which taken the values (3.79, 3.60 and 3.49 eV), (3.520, 3.32 and 3.140 eV) and (3.59, 3.295 and 3.165) eV for thicknesses 60, 130,and 200 ±5 nm respectively. The optical constants such as absorption coefficient, refractive index, extinction coefficient, real and imaginary parts of dielectric constant and optical conductivity are calculated. The electrical properties of the films are studied and it is found that all prepared PbO thin films are n - type semiconductors and found that the carrier's concentration (n) and electrical conductivity (σ) increased with increasing annealing temperature, while the mobility (µ) and the resistivity (ρ) decreased with increasing annealing temperature. The electrical conductivity increase exponentially as the annealing temperature increases for all thickness. The results show that all films have two activation energy and this energy decreases with increasing annealing temperatures.

الترسيب الضوئي للفضة على المركب النانوي (ثنائي اوكسيد التيتانيوم والكاربون الفعال) المحضر بواسطة المعاملة الحرارية == Ag Photodeposited of AC/TiO2 Nanocomposites Synthesized by Thermal Treatment

Author name: اسراء حمزة هاتف عبد
Supervisor name: ايناس محمد الربيعي | اياد فاضل القيم
General topic: Physics
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: تم تحضير المركب النانوي (ثنائي اوكسيد التيتانيوم والكاربون الفعال ) باستخدام الطريقة المائية الحرارية بنسب مختلفة من الكاربون الفعال .المركب النانوي المحضر تم حرقة حراريا عند درجة حرارة 500 oC لمدة ساعة واحدة .بعدها تم ترسيب الفضة على المركب النانوي (ثنائي اوكسيد التيتانيوم والكاربون الفعال ) بطريقة الترسيب الضوئي .الصفات البصرية والسطحية مثل ( التركيب البلوري , خصائص السطح , فجوة الطاقة) للنماذج المحضرة) تم تشخيصها باستخدام حيود الاشعة السينية , المجهر الالكتروني الماسح عالي الانبعاث, مطياف الاشعة السينية المشتتة للطاقة,المجهر الالكتروني النفاذ , مطياف الاشعة السينية الضوئي ,جهاز قياس فجوة الطاقة , مطياف رامان , جهاز الفلوره نتائج حيود الاشعة السينية بينت بان المركب النانوي المحضر يقل فيه التبلور لثنائي اوكسيد التيتانيوم النانوي بزيادة قيم الكاربون الفعال ,ونتائج المجهر الالكتروني الماسح اشارت الى وجود تجمعات كثيرة ضمن الحجم البلوري .من نتائج حيود الاشعة السينية ونتائج السطح للمجهر الكتروني الماسح بان كل ثنائي اوكسيد التيتانيوم المحضر يمتلك جسيمات بلورية نانوية في طور )الانتاس( تحليلات مطياف الاشعة السينية المشتتة للطاقة وضحت بانه العناصر الموجودة بالمركب النانوي كانت بالاساس (الكاربون , التيتانيوم, الاوكسجين) وكمية من الفضة غير مرئية خصائص السطح للمركب النانوي هو بالاساس جسمات تشبه الشريحة . نتائج تحليلات مطياف الاشعة السينية الضوئي اشارت الى ظهور الجسيمات النانوية للفضة التي كانت متواجدة بنسب قليلة في المركب النانوي (ثنائي اوكسيد التيتانيوم والكاربون الفعال والفضة( قيم فجوة الطاقة لثائي اوكسيد التيتانيوم التي تم الحصول عليها تتناقص بزيادة الكاربون الفعال والفضة . قياس الفلورة يوضح ان المركب النانوي (ثنائي اوكسيد التيتانيوم والكاربون الفعال والفضة ) يمتلك معدل ( اعادة اتحاد ) منخفض للالكترون - فجوه مقارنة مع (ثنائي اوكسيد التيتانيوم والفضة )او (ثنائي اوكسيد التيتانيوم والكاربون الفعال) بعدها تم تحضير فلم رقيق من المركب النانوي المحضر بتقنية الترسيب بالليزر النبضي . بينت قياسات تاثير هول ان الغشاء كان من نوع n - type . بينت قياسات (I - V) ان تيار الانحياز الامامي عند الظلام يتغير تقريبا اسيا مع الفولتية المسلطة وكذلك بينت قياسات(I - V) عند الاضاءة ان المفرق الهجين للغشاء على اساس من نوع p - type يمتلك كفاءة جيدة كخلية شمسية. فاعلية التحفيز الضوئي للمركب النانوي المحضر تم اختبارها لازله صبغة الماكسيلون الزرقاء في المحاليل المائية بوجود مصدر ضوء( اشعة فوق البنفسجية بطول موجي 365nm) .اظهرت النتائج ان فاعلية التحفيز الضوئي عالية ونسبة ازالة عالية بوجود المركب النانوي ( ثنائي اوكسيد التيتانيوم والكاربون الفعال والفضة ) | Synthesis ( TiO2/AC) nanocomposite by using hydrothermal method with different ratio of active carbon (AC). The prepared (TiO2/AC) nanocomposite were calcined at temperature 500 oC for 1hr.Then the Silver (Ag) deposited on prepared (TiO2/AC) via Photo - deposition method .The optical properties such as crystalline structure, morphology and band gap of the synthesized samples were characterized by X - ray diffraction (XRD),Field - emission scanning electron microscopy (FE - SEM) , Energy dispersion X - ray (EDX) spectroscopy, Transmission electron Microscopes (TEM), X - ray Photoelectron Spectroscopy(XPS), UV - Vis diffuse reflectance spectroscopy(DRS), Raman spectroscopy and Photoluminescence Spectroscopy(PL) The results from XRD measurement indicated that the (Ag/TiO2/AC) nanocomposite is reduced in the crystallinity of the TiO2 with the increase in the activated carbon amount . The FE - SEM measurements proof a full agreement with the crystal size. From XRD crystalline size data and SEM micrographs, it could be concluded that all TiO2 prepared have small nanoparticles crystallize in the anatase phase. The results of EDX analysis shows that the elemental contents of Ag/TiO2/AC were mainly composed of C, Ti and O elements while Ag not detected. The morphology of Ag/TiO2/AC detected by TEM consists ,mainly, of plate - like structure .The results of XPS analysis indicate appearance of Ag nanoparticles in Ag/TiO2/AC nanocomposite .From UV - Vis diffuse reflectance spectrophotometer the Energy band gap values was measured . results show that composite of TiO2 obtained is decreases in present of the active carbon and silver .PL measurements show the Ag/TiO2/AC nanocomposite has a lower recombination rate of electron - hole pairs compared with TiO2 or AC/TiO2. Hall effect measurements of the thin film (Ag/TiO2/AC)Prepared by Pulse Laser Deposition Technique it was kind n - type . Current - voltage characteristics of thin film showed that the forward bias current exponentially change approximately with applied voltage at dark. Also (I - V) characteristics under illumination of Ag/ TiO2/AC thin film prepared on p - Si substrate It has a good efficiency as a cell solar.The photocatalytic activity of synthesized nanocomposites was examined by text tile dyes removal (maxilon blue dye) in aqueous solutions in the presence of solar light . The results show highly photocatalytic activity and highly removal in the presence of Ag/ TiO2/AC nanocomposites.

دراسة تاثير ترسيب طبقات متعددة (TiO2/ZnO : Se/CdS : Se) على اداء سليكون نوع (P - Type) محفور بالليزر == Study the Effect of Multi - Layers Deposition (TiO2/ZnO : Se/CdS : Se) on the Performance of Laser Textured (P - Type) Silicon

Author name: ايمان عبد السلام خضر
Supervisor name: سامي عبد الحسين حبانه
General topic: Physics
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: تم تحضير اغشية رقيقة متعددة الطبقات ((TiO2/ZnO/CdS, ((TiO2/ZnO/CdS : Se, (TiO2/ZnO : Se/CdS) باستخدام تقنية الترسيب بالليزر النبضي (PLD) تحت ضغط (10 - 5) ملي بار باستخدام ليزر النيوديميوم ياك (Nd : YAG) النبضي ذي الطول الموجي (1064 nm), على شرائح زجاجية وسليكونية. بينت قياسات حيود الاشعة السينية لكل النماذج ان الاغشية ذات تركيب متعدد التبلور, التركيب المكعبي والمعيني المتعامد لمركب كبريتيد الكادميوم (CdS), تركيب رباعي الاضلاع واحادي الميل لمركب اوكسيد التيتانيوم ((TiO2, التركيب السداسي لمركب اوكسيد الخارصين (ZnO), وانتاج تراكيب بلورية للسلينيوم واوكسيده كمنتج. بينت دراسة طبوغرافية السطح للمواد المرسبة باستخدام مجهر القوة الذرية (AFM) ان معدل الحجم الحبيبي والخشونة تغير عند مزج عنصر السيلينيوم ( (Seوتغير موقعه مابين الطبقتين تم حساب الخواص البصرية لكل الاغشية من خلال طيف الامتصاص باستخدام مطياف الاشعة الفوق بنفسجية - المرئية ( (UV - VISعند مدى الاطوال الموجية ( - 300900) نانومتر, النتائج بينت ان افضل حافة امتصاص مرئية عند الطول الموجي 525 نانومتر ووجد ان فجوة الطاقة البصرية المباشرة تقل بعد اضافة عنصر السلينيوم ((Se, وايضا تم حساب الثوابت البصرية المحضرة مثل معامل الامتصاص, معامل الخمود, ومعامل الانكسار لكل الاغشية الرقيقة. تم الحصول على منحني تيار_ فولتية تحت الظلام والاضاءة للخلايا الشمسية المتعددة التركيب. وقد بينت النتائج تغيرا ملحوظا في اداء الخلايا الشمسية عند القيم Im= 42 mAو Vm= 0.21 V عند مزج السلينيوم مع اوكسيد الخارصين ZnO كطبقة وسطية واعطى افضل كفاءة تحويل بحدود 7%. | The multi - layers thin films of (TiO2/ZnO/CdS), (TiO2/ZnO/CdS : Se), and (TiO2/ZnO : Se/CdS) prepared by using pulsed laser deposition technique (PLD) under vacuum of 10 - 5 mbar using pulsed Nd : YAG laser with (1064 nm), which deposited on a glass and silicon wafer substrates. X - ray diffraction measurements for all samples showed that all films have polycrystalline structures, cubic & orthorhombic CdS structure, tetragonal & monoclinic TiO2 structure, hexagonal ZnO structure and a crystalline structures for Se with its oxide (SeO2) as a product. Surface morphology of the deposit layers stated that the average grain size and roughness have changed when selenium (Se) is added and its location is changed within two layers. The optical properties of all thin films are investigated from absorption spectrum in the UV - VIS through the range of (300 - 900) nm. The results show that the best optical absorbance edge is in (527.65 nm), and it is found that the value of the direct optical energy gap decreases when selenium (Se) is mixed. Also the optical constants such as : extinction coefficient, and refractive index for all prepared thin films are calculated. Current - voltage characteristics, under dark and illumination, are obtained for solar cells of hetero - structure solar cells, illustrated a significant change in behavior of solar cell performance at Im= 42 mA, and Vm= 0.21 V when Selenium (Se) is mixed with ZnO as an intermediate layer and gave the best conversion efficiency equal 7%.

استخدام تقنيات فيزيائية لتشخيص سرطان الثدي في نماذج من الدم == Using of Physical Techniques for Diagnosis of Breast Cancer to Blood Samples

Author name: شيماء عواد كاظم حميدي
Supervisor name: خالد حسين هاتف العطية
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Babylon
First pages:
Abstract: Breast cancer is one of the most common malignancies in women. In this thesis we employ fourth techniques for diagnosing the breast cancer early; UV - visible spectroscopy, Fourier Transform InfraRed (FTIR - ATR) technique, Atomic Absorption Spectrophotometer (AAS) and Solid - State Nuclear Track detectors (SSNTDs) (CR - 39NTD),was took blood samples to females whom newly diagnosis breast cancer ,control groups and females whom took chemotherapy at aged (33 - 74) years in the Middle Euphrates Center Cancer of Al Najaf province : UV - visible spectroscopy technique : we have found fourth types of bands in the spectra of this technique for female of breast cancer ,female who take chemotherapy and healthy subjects . First, second and third band regions cover the ultraviolet behavior of proteins but fourth band does not show absorbance of proteins, we noted appeared and disappeared some bands also increased the absorbance in patients which are represented early an evidence for diagnosing breast cancer.Fourier Transform Infrared (FTIR - ATR) technique : By employed this technique we found the absorbance of patients with new breast cancer larger than the absorbance of health subjects was found high statistically significant for wavenumber(ʋ) cm - 1 (1246.1 - 1241.4cm - 1) , (1536.4 - 1530.3cm - 1), and ( 3297.3 - 3277.0cm - 1) where was p - value < 0.05 while (698.6 - 667.8 cm - 1) and (2937.8 - 2925.5 cm - 1) was non - significant statistically p - value was larger than 0.05 also getting shift in wavenumber between two cases.Atomic Absorption Spectrophotometer (AAS) technique : by using itcalculated the levels of the (trace elements) metal ions(Cu ,Zn ,Fe ,Mnand Ni) has a potential role in early detection and monitoring of breastcancer where we found high increased in concentration of Iron in patientsand less in copper compared with health while high decreased inconcentration in Zinc, Manganese and Nickel in patients compared withhealth .Solid - State Nuclear Track detectors (SSNTDs) technique : we calculated by using it the mean of concentration of radon and activity of radon for females of control groups , newly diagnosis breast cancer and females whom took chemotherapy which was ARn (Bq) health group(0.097895) > ARn (Bq) new case(0.079873) > ARn (Bq) take chemotherapy(0.036443) > . We have found the Levene's Test (F) was Significant for the comparative between normal case and the case of take chemotherapy( .012) less than 0.05, the Levene's Test (F) was higher significant for the comparative between new case of breast cancer and the case who take chemotherapy (.001) much less than 0.05 while non - significant statistically between normal and new case(.731) larger than 0.05.

دراسة شكل توزيع الشدة لحزمة الليزر بعد انتشارها خلال اوساط مختلفة == A Study Of Laser Beam Profile after Propagation Through Different Media

Author name: صفا عبد الكريم رحيم
Supervisor name: وجيهة عبد الدائم
General topic: Physics
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: تم في هذه البحث دراسة خواص حزمة الليزر لمنظومات ليزرية مختلفة وبظروف مختلفة عمليا ونظريا، وتم ذلك باستخدام منظومة بصرية احتوت على ليزر الهليوم نيون ذو الطول الموجي (632.8nm) والقدرة (1.04mw) وليزر شبه موصل ذو الطول الموجي ( 650nm) والقدرة ( 4.64mw) وليزر حالة الصلبة ذو الطول الموجي (422nm) والقدرة (14.64).وتم الحصول على القياسات باستخدام (CCD CAMERA) نوع (BEAMAGE - CCD12 / Genetic) وكاشف سيليكوني نوع (Silicon PIN) وباستجابة سريعة A/W) 0.41 - 0.7).وقد اظهرت الدراسة ان بقعة الحزمة دائرية منتظمة نسبيا وشكل توزيع الشدة للحزمة توزيعا كاوسيا لليزر الهليوم نيون في الهواء. فيما تغيرت الشدة %( 97.4,97.1,97.1,89.) باختلاف المسافات cm( 10,20,30,40 ) على التوالي وقلت الشدة بزيادة المسافة.فيما اختلفت البقعة عن شكلها الدائري عند استخدام الماء النقي والمالح والمضطرب والملون بصبغة وظهر اختلاف قليل في شكل التوزيع للشدة عن التوزيع الكاوسي وكان التغير اكبر مع الماء المالح والمضطرب والملون بصبغة (GRL)0اما عند استخدام ليزر اشباه الموصلات (650nm, 4.64 mw) تغيرت بقعة الحزمة الى الشكل البيضوي تقريبا، واختلف شكل توزيع الشدة للحزمة عن التوزيع الكاوسي في الهواء. فيما كان تغير الشدة غير منتظم مع اختلاف المسافة. فيما اختلفت البقعة عن شكلها البيضوي عند استخدام الماء النقي والمالح وظهر اختلاف قليل في شكل التوزيع للشدة عن التوزيع الكاوسي وكان التغير اكبر مع الماء المالح والمضطرب والمخلوط بصبغة0 وعند استخدام منظومة ليزر الحالة الصلبة بطول موجي قصير (422nm) وقدرة (14.64mw) فقد حصل تغير ملحوظ في شكل البقعة وكذلك شكل توزيع الشدة، حيث وجد تعريض كبير في شكل توزيع الشدة في الهواء. اما في الاوساط المادية الاخرى المستخدمة فقد حصل تغير كبير شكل البقعة(تشويه) وفي شكل توزيع الشدة عند تغير ظروف الوسط المادي واعلى حالة للتغير كانت عند استخدام الماء النقي والمالح المضطرب لليزر 422nm ، ومن نتائج الشدة تبين تغير غير منتظم في قيمها للاوساط والمسافات المختلفة. نظريا تم ادخال النتائج العملية الخاصة بقياس توزيع الشدة على المحورين (x,y) بتغيير محور z في برنامج حاسوبي خاص (GnoPlot) للحصول على شكل توزيع الشدة للحزمة الليزية في الهواء واظهرت نمطا كاوسيا للهليوم نيون فيما اظهرت اشكال اخرى لتوزيع الشدة تبعا لنوع الليزر وللوسط المادي المار خلاله. وسجلت النتائج النظرية تطابقا نسبيا مع النتائج العملية لجميع الحالات. | In this search of the properties were study of the beam laser to different laser system and different condition , theatrically and experimentally. By using optical system consist of the Helium neon (He - Ne) laser( =632.8nm,p=1.04mw) and semi - conductor (=650nm,p=4.64mw ) and semi - conductor(=422nm,p=14.64mw). . . The parameters beam laser (spot, shape , intensity ) were study and also study the attenuation and turbulence .for the laser mentioned above and with following environmental condition. . First : study of the properties of laser beams of the three system in the air at different distance (10,20,30,40)cm. . Second : study of the properties of laser beams of the three system in the pure ,slate (seawater ) water (still , turbulence ) at different distance (10,20,30,4 )cm . Third : study of the properties of laser beams of the three system in GRL dye with construction (10 - 7 ). Measurement were obtained by using a CCD camera and silicon detector type (BEAMAGE - CCD12 / Genetic ) and silicon detector type (silicon PIN) in fast response (0.41 - 0.7A/W). The result has shown that the spot beams relatively regular circuit and the shape of the distribution intensity was Gaussian shape of He - Ne laser in air. . While the peak values changed with different distance (97.4,97.1,97.1,89.3)% , and decrease intensity with increase the distance. While different spot on the circular shape when using pure , slate (turbulence) and color dye and appeared a little difference in the shape of intensity distribution for Gaussian shape intensity and the biggest change was with slate , turbulence , water and color dye (GRL). . it was noticed the intensity wasn’t regular at different distance ,the absorption coefficient value of the three cases was calculated (0.0014,0.0033,0.0033,0.0021,0.0060 )cm - 1 respectively . But when using semi - conductor laser (650nm,4.64mw)the spot beam laser was change to the elliptical shape almost , and different the shape of intensity distribution of the beam for distribution Gossans shape in air , while the change intensity was irregular with different distance , value of absorption coefficient was (0.0022,0.0055,0.0036,0.0028,0.0036 ) . while the spot difference for circular shape when using pure ,slate water and appeared a little difference in intensity distribution shape than Gaussian distribution ,the bigger change with slate turbulence water and color dye , it was noticed the change intensity was not regular at different distance . But when using semi - conductor laser system with short wave length (422nm) and power (14.64mw) noticeable change in the shape of spot has got and distribution intensity shape . Where found a large boarding in the shape distribution intensity in air ,but in other maternal medium using , the large change in spot shape has got and intensity distribution shape when change the media conditions, the highest case of the change when using turbulence pure and salt water. From intensity results shows irregular change in value of the different medium and distance ,value of absorption coefficient was (0.0070,0.0013,0.0025,0.0013,0.0013 ) . it was noted that the value of coefficient absorption is the least and in all conditions from other lasers. This shows the possibility use this laser in optical communication special under water. . theoretically, the special experimental results with measure intensity distribution was enter on the axis (x ,y ) by change z axis in special program computer (Gnoplot) to get on shape intensity distribution of the beam laser in air and different distance and showed Gaussin mode for He - Ne , while showed other shape for intensity distribution depending on type of the laser and material medium through passing and different distance . Theory results recorded relatively match with experimental results for all cases

حسابات انموذج القشرة لبعض النويات الغريبة حول القلب المغلق 132Sn == Shell Model Calculations of some Exotic Nuclei around the Core 132Sn

Author name: سارة مهدي عبيد الشريفي
Supervisor name: فـؤاد عطية مجيـد
General topic: Physics
Specific topic: Thin Films
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: اجريت حسابات انموذج القشرة وبنطاق واسع وبدون تقييد لدراسة مستويات الطاقة ومعدلات الانتقال المختزلة B(E2;0_1^+→├ 2_1^+ )┤ ، B(E2;2_1^+→├ 4_1^+ )┤ وطاقات الربط للنظائر134,136Sn ، 134,136Te ، 136,138Xe ، 138Ba . لقد اجريت الحسابات باستخدام برنامج انموذج القشره الحديث NushellX@MSU عن طريق توظيف التفاعلات المؤثرةjj56pna, jj56pnb, kh5082, cw5082, jj56cdb, khhe . لقد اجريت الحسابات قرب القلب المغلق 132Sn في فضاء النموذج jj56pn وبدون اي قيد مفروض على نيوكليونات التكافؤ خارج القلب المغلق.قورنت حسابات مستويات الطاقة ومعدلات الانتقال المختزله وطاقات الربط مع البيانات العملية المتوفرة حديثا. تم الحصول على نتائج ملائمة ومرضيه وذلك عن طريق مقارنه القيمة المطلقة للفرق بين المستويات 2_1^+ و4_+^1 النظرية والعملية لجميع النظائر قيد الدراسة. تم الحصول على طاقة الربط النووية بشكل ممتاز عن طريق حسابات انموذج القشرة الحالية. من خلال المقارنه بين الحسابات النظرية لمستويات الطاقة المتهيجه واحتمالية الانتقال الكهربائي المختزلة B(E2) مع البيانات العلمية، توصلنا الى استنتاج انه لا يوجد تفاعل مؤثر شامل في هذه المنطقة ونحتاج الى الكثير من البحوث لدراسة الخصائص النووية الاخرى التي يمكن ان تساعدنا في فهم افضل للنويات التي تقع بجوار 132Sn. | Unrestricted large - scale shell model calculations have been performed to study the energy levels, reduced transition probabilities B(E2; 0+ → 2+), B(E2; 2+ → 4+) and binding energies for 1 1 1 1134,136Sn, 134,136Te, 136,138Xe and 138Ba isotopes. The calculations have been performed using the recent shell model code NushellX@MSU byemploying j j56pna, j j56pnb, kh5082, cw5082, j j56cdb and khhe residual effective interactions. The calculations have been performed by taken the core at 132Sn in j j56pn model space without any restrictions imposed on the valence nucleons outside the core.The calculations of excitation energy levels, reduced transition probabilities and binding energies, were compared with the recent available experimental data. A satisfactory results were obtained by comparing the absolute difference between theoretical and experimental 2+ as well as 4+ states for all selected isotopes. The experimental binding energy is very well reproduced by the current shell model calculations. From the comparison between our theoretical calculationsfor excitation spectra and reduced electric transition probabilities B(E2) withthe corresponding experimental data, it is concluded that, there is no universal effective interaction in this mass region and more investigation needed to study other nuclear structure properties that might help us to better understand the nuclei lies in the vicinity of 132Sn core.

الخصائص التركيبية والطوبوغرافية والبصرية لاغشية (CdS : Li,Al) المحضرة بطريقه المحلول الغروي == Structural, Morphological and Optical Properties of CdS : Li,Al Films Prepared by Sol - Gel Method

Author name: براق كريم كاظم الحسناوي
Supervisor name: فؤاد شاكر هاشم الجبوري
General topic: Physics
Specific topic: Thin Films
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: في هذا العمل, تم تحضير اغشية رقيقة من كبريتيد الكادميوم (CdS) النقية والمشوبة بالليثيوم والالمنيوم بنسب موليه مختلفة (05.0, 1 .0 و15.0٪). بتقنيه الطلاء الدوار بالمحلول الغروي, رسبت على قواعد من الزجاج بدرجة حرارة الغرفة K300 بسرعه دوران 1000 دوره بالدقيقة الواحدة وزمن دوران 10ثواني وحرارة تلدين 623 كلفن ولمدة 150 دقيقه.طيف حيود الاشعة السينية اظهر ان جميع الاغشية المرسبة كانت متعددة التبلور وذات تركيب سداسي والاتجاه مفضل على طول المستوي (002) ماعدا الاغشية المشوبة بنسب موليه 0.1 و0.15 من الليثيوم غيرت الاتجاه المفضل الى المستوي (100) ومعدل الحجم الحبيبي لاغشية CdS) ) تساوي 8.666 نانومتر ومع زياده نسب التشويب فان معدل الحجم الحبيبي يزداد حيث وجد بمدى (9.341الى 11.112 نانومتر ل(CdS : Li ) و(9.331 الى 10)نانومتر ل ((CdS : Al. تم دراسة طبوغرافية السطح باستخدام مجهر القوى الذرية (AFM) ان مربع معدل الجذر والخشونة يزداد بزيادة التشويب,البيانات من صور AFM)) تظهر الجسيمات محددة بشكل جيد كمعالم مع مورفولوجيا الحبيبية ويشير الى وجود حبيبات بلورية صغيرة. الدراسة البصرية لاغشية الرقيقة كبريتيد الكادميوم (CdS) النقية والمشوبة من الليثيوم Li) ) والالمنيوم(Al) اظهرت قيمة جيده للنفاذية التي تتجاوز (87.0 - 91.8%) ل (CdS ) وبين منطقة الضوء المرئي (اطول من 500) ومنطقة تحت الحمراء ولكنها تتناقص الى حدود89.3%) , 77.4) و(85 - 88%) مع نسب التشويب العالية من الليثيوم والالمنيوم (0.15مول %) . الامتصاصية العالية في منطقة الموجات فوق البنفسجية تجعلها مناسبة اكثر للتطبيقات كنوافذ للخلايا الشمسية. والانتقالات الالكترونية مباشرة مسموحة وفجوة الطاقة البصرية تساوي 3.08 eV للغشاء النقي (CdS) وتساوي 2.89 eV) الى 2.97eV ) CdS : Li وCdS : Al (2.927eV to 3.025 eV)) مما يدل على ان قيم فجوة الطاقة تتناقص باضافة نسب مولية مختلفة لكل من الليثيوم والالمنيوم السلوك العام للثوابت البصرية مثل معامل الامتصاص, معامل الانكسار ، معامل الخمود ، وثابت العزل الحقيقي والخيالي وفقدان العزل والتوصيلية البصرية تزداد مع زيادة نسب التشويب المولية الليثيوم والالمنيوم لجميع النماذج في مناطق الضوء المرئي وتحت الحمراء. | In this work, pure cadmium sulfide(CdS) and Li, Al - doped CdS with different percentages of (0.05, 0.1, and 0.15 mol%) thin films were prepared by using sol - gel spin coating technique, deposited on glass substrates at room temperature (RT) (300K) with the spin speed and spin time of 1000 rpm and 10 seconds and annealed at temperature 623 K for 150 min. The XRD pattern revealed that all deposited films are found to be polycrystalline with a hexagonal wurtzite structure with a preferred orientation along the (002) plane, excepted the doping films by 0.1, and 0.15 mol% Li was led to change the preferable orientation to (100) plane. The average crystallite size for pure CdS films is equal to 8.666 nm. As the doping percentage increases, the crystallite size increase where is found to lie in the range of 9.341 nm to 11.112 nm for CdS : Li, and 9.331 nm to 10 nm for CdS : Al. The surface morphology of thin films is studied by using atomic force microscope (AFM). The roughness and root mean square values are increasing with the increasing of Li, Al doping concentration and the data from AFM images show well defined particle like features with granular morphology and indicates the presence of small crystalline grains. The optical study of pure cadmium sulfide(CdS) and Li, Al - doped CdS showed good transmittance value, that exceeds (87.0 - 91.8%) for CdS in VIS (longer than 500 nm) and NIR region, but it decreases to the range (77.4 - 89.3%), and (85 - 88%) , with a high doping ratio of lithium and aluminum (0.15 mol %), respectively. The high absorbance in UV region makes it more suitable for applications as a window in solar cell. The electronic transitions was directly allowed and the optical energy gap (Egopt ) were equal to( 3.08 eV) for pure CdS and( 2.89 eV to 2.97eV) for CdS : Li, and (2.927eV to 3.025 eV) for CdS : Al, which indicates that the optical energy gap values decrease with additive both Li and Al mole percent. The general behavior of the optical constants such as absorption coefficient, refractive index, extinction coefficient, real and imaginary parts of dielectric constant, dielectric loss angle, and optical conductivity increases with the increasing of doped CdS by Li and Al mol % in all samples in the VIS and NIR regions

تاثير امتزاز الغاز على التركيب الالكتروني لشرائط نانوية هجينة من السلسين - الجرافين باستعمال نظرية الكثافة الدالية == Effect of Gas Adsorption on the Electronic Structure of Silicene/Graphene hybrid Nanoribbons using Density Functional Theory

Author name: علي صبحي جابر الخواجة
Supervisor name: حمد رحمن جبر
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: تم استقصاء امتزاز مجموعة جزيئات غاز شائعة وهي CO وCO2 وNH3 وNO NO2 وSO2 على اشرطة نانوية مؤلفة من سلسين|جرافين ((SiGNRs باستعمال نظرية الكثافة الوظيفيةdensity functional theory (DFT) وبتقريب (PBE) Perdew, Burke, and Ernzerhof مع مجموعة الدوال الاساس 6 - 31G. اظهرت النتائج ان امتزاز جميع الغازات CO وCO2 وNH3 وNO وNO2 على الاشرطة النانوية للسلسين|جرافين هو امتزاز كيمائي قوي مع طاقات امتزاز اكبر من1eV ، ونتيجة للتفاعل القوي لهذه الغازات على الاشرطة النانوية للسلسين|جرافين فان هذه الاشرطة النانوية يمكن ان تستعمل كمحفز او منشط ، وبالتالي امكانية اقتراحها كمحفز خالية من المعادن، باستثناء الامتزازات الاتية : CO2 على الاشرطة النانوية للسلسين|جرافين المشابه للكرسي عند الموقع T1، وامتزاز NH3 وNO2 على SiGNR المشابه للكرسي عند الموقع T2، وامتزاز NO وNH3 على SiGNR ذو النوع المتعرج عند الموقع T2، وامتزاز NO2 على SiGNR ذو النوع المتعرج عند الموقع T1 وجميع امتزازات SO2 على SiGNRs فانها امتزازات فيزيائية ضعيفة وبطاقات امتزاز تتراوح ما بين0.045) eV الى(0.84 ، وهذا يدل على ان SiGNR يمكن ان يكون كمتحسس جيد لـ (,CO CO2، NH3, NO2 وSO2) عند المواقع المشار اليها. علاوة على ذلك، فان فجوة الطاقة للاشرطة النانوية للسلسين|جرافين عند امتزاز الغازات CO2 وCOو NH3 وNOو NO2 وSO2 تكون مفتوحة وبطرق مختلفة. بشكل عام، فان فجوة الطاقة لـSiGNR المشابه للكرسي اكبر من تلك التي لـ SiGNR ذو النوع المتعرج. وقد وجدنا ان SiGNR المشابه للكرسي والذي يمتز جزيئات الغاز لـ CO وCO2 وNH3 وSO2 عند الموقعT1 تكون قيمة جهد التاين والالفة الالكترونية له صغيرة بالمقارنة مع اشرطة السلسين|جرافين الاخرى، وهذا يدل على ان هذه الانظمة لديها القدرة على التبرع بالكترون، اي يحتاج الى طاقة صغيرة لازالة الكترون لتصبح ايونات موجبة.توضح النتائج ايضا على ان القيمة الاكبر لـ EHOMOلامتزاز NO وNO2 للنوع المتعرج لـ SiGNR عند الموقع T1 هي eV5.635 - وeV5.541 - على التوالي، وهذه القيم تظهر ميل الجزيئة للتبرع بالالكترونيات والقيمة الاصغر قيمة لـ ELUMO للنوع المتعرج لـ SiGNR عند الموقعT1 هي eV5.344 - و5.315 eV - ، وهذه القيم تظهر ميل الجزيئة الى تقبل الالكترونات | The adsorption of common gas molecules (CO, CO2, NH3, NO, NO2 and SO2) on silicene/graphene nanoribbons (SiGNRs) is investigated using density functional theory (DFT) with Perdew, Burke, and Ernzerhof (PBE) /6 - 31G basis set. The results show that all the adsorption of (CO, CO2, NH3, NO and NO2) on SiGNR is a strong chemisorption with adsorption energies being larger than 1eV, due to the strong interaction of (CO, CO2, NH3, NO and NO2) on SiGNR which could catalyse or activate, suggesting the possibility of SiGNR as a metal - free catalyst. Except the adsorption of CO2 on armchair SiGNR at site T1, NH3 and NO2 on armchair SiGNR at site T2, CO and NH3 on zigzag SiGNR at site T2, NO2 on zigzag SiGNR at site T1 and all adsorbed SO2 on SiGNRs are weak physisorption with Ea ranging from (0.045 to 0.84) eV, indicating that SiGNR could be a good (CO, CO2, NH3 NO2 and SO2) sensor at these sites. Moreover, the energy gap of SiGNR is opened upon adsorption of (CO, CO2, NH3, NO, NO2 and SO2) in various ways. In general, the energy gap for armchair SiGNR is larger than those of zigzag SiGNR. We found that the armchair SiGNR with CO, CO2, NH3 and SO2 gas molecule adsorption at site T1 has small value of ionization potential and electron affinity compared with other SiGNRs, this indicates that these systems have the ability to donate an electron; it needs a small energy to remove an electron to become cation. Our results indicate that larger values of EHOMO for adsorption NO and NO2 zigzag SiGNR at site T1 is ( - 5.635 and5.541 - ) eV, show that a propensity of the molecule to donate electrons and smaller value ELUMO for zigzag SiGNR at site T1 is ( - 5.344and - 5.315) eV, these values show that a propensity of the molecule to accepter electrons

دراسة بعض الخصائص الفيزيائية p - MgxZnO1 - x/n - Si للكاشف الضوئي والمتحسس الغازي == Study of Some Physical Properties of p - MgxZnO1 - x/n - Si Photodetector and Gas Sensor

Author name: سليم حمزة طرير جبر
Supervisor name: عبد العزيز عبيد موسى العكيلي
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Babylon
First pages:
Abstract: في هذا العمل تم تحضير اغشيةMgxZnO1 - x باستخدام تقنية الرش الكيميائي الحراري وهي طريقة ملائمة ومناسبة للترسيب على مساحات كبيرة . وتم انماء مزيج محاليل MgxZnO1 - x بنسب حجمية مختلفة (0 ،30 ،50 ،70 و90)% ومرسبه على قواعد زجاجية وسليكونية وعند درجات حرارة مختلفة (400، 450 و500) درجة مئوية وتم تثبيت السمك من خلال تثبيت عدد الرشات وكان سمك جميع الاغشية يتراوح بين (5±80) نانومتر وقد تم اجراء الرش باستخدام غاز النيتروجين . تم تشخيص التركيب البلوري للاغشية بتقنية حيود الاشعة السينية (XRD) واظهرت النتائج ان جميع الاغشية المحضرة كانت متعددة التبلور واظهرت تحسن في البنية البلورية من خلال تغير درجات الحرارة. درست طبوغرافية السطح للاغشية باعتماد مجهر القوى الذرية (AFM) والمجهر الالكتروني الباعث الماسح FESEM)) ومشتت الطاقة للاشعة السينية (EDX). ان زيادة نسبة محتوى المغنيسيوم في الاغشية ادت الى نقصان خشونة السطح . وان (EDX) اظهرت احتواء الاغشية على عناصر( Si، N ،O ، Zn وMg ) كما هو متوقع . تم قياس استطارة رامان لاغشية MgxZnO1 - x/n - Si الرقيقة لمختلف نسب محتوى المغنيسيوم ، حيث اظهرت شدة ذات حزمتين cm - 1(601 و1202) المقابلة الى انماط استطارة رامان ذات الرتبة الاولى العليا E_2^high, ونمط الرتبة الثانية هو A1(LO) وهو نمط الرتبة الاولى بالنسبة لاوكسيد الزنك، اذ انه بزيادة محتوى المغنيسيوم الى اكثر من(50) % فان نمط الرتبة E_2^high سوف تنخفض شدته. وتمت دراسة الخصائص البصرية للاغشية المحضرة من خلال قياس النفاذية البصرية في المنطقة الطيفية (700 - 300) نانومتر، وكانت نتائج النفاذية تتراوح من (89 - 65)% عند زيادة محتوى المغنيسيوم من (30 - 90)% في درجة حرارة (400) درجة مئوية ، وتزداد النفاذية اكثر عند زيادة درجة الحرارة الى (500) درجة مئوية لتصبح من(95 - 84) % عند محتوى المغنيسيوم نفسه مما يجعلها ملائمة لتطبيقات المتحسسات الغازية. وتم قياس الامتصاصية والانعكاسية لجميع الاغشية وكانت تتناقص بارتفاع درجات الحرارة، بالاضافة الى ذلك تم قياس معامل الامتصاص لجميع الاغشية وكانت قيمته اعلى من cm - 1 (104) . وحسبت فجوة الطاقة المباشرة لاوكسيد الزنك النقي وكانت (3.18 ،3.21 و3.19) الكترون فولت التي تقابل درجات الحرارة (400، 450 و500) درجة مئوية على التوالي . وتم حساب الثوابت البصرية كمعامل الانكسار ومعامل الخمود وثابت العزل الحقيقي والخيالي لجميع الاغشية المحضرة. وتم حساب فجوة الطاقة البصرية من خلال مطياف الاستضائية وكانت القيم تتراوح بين (3.558 - 3.531) الكترون فولت، تم دراسة الخصائص الكهربائية كالتوصيلية الكهربائية المستمرة وتاثير هول، واظهرت نتائج قياسات تاثير هول ان غشاء اوكسيد الزنك النقي من النوع السالب (n - type) اما اغشية MgxZnO1 - x فهي من النوع الموجب(p - type) وتمتلك طاقتي تنشيط (Ea1 وEa2). تم قياس سعة كاشف MgxZnO1 - x /n - Si كدالة لفولتية الانحياز العكسي وبتردد يتراوح بين 0.6) (1 - ميكا هيرتز، واشارت تلك النتائج الى ان كاشف المفرق الهجين من النوع الحاد. كما وجد ان جهد البناء الداخلي تنخفض قيمته بزيادة محتوى المغنيسيوم وتزداد عند نسبة محتوى المغنيسيوم (90)% . واظهرت خصائص تيار - فولتية لكاشف MgxZnO1 - x /n - Si ان تيار الظلام الامامي يتغير اسيا مع فولتية الانحياز، كذلك لوحظ تناقص عامل المثالية وتيار الاشباع العكسي بزيادة محتوى المغنيسيوم في الاغشية في حين يزداد عند درجات الحرارة العالية كما تم في هذا العمل دراسة الخصائص الطيفية للكاشف ووجد ان قيم الاستجابة الطيفية ، الكفاءة الكمية والكشفية النوعية تزداد بزيادة نسبة محتوى المغنيسيوم ، بينما القدرة المكافئة للضوضاء تنخفض بزيادة محتوى المغنيسيوم . وظهرت قمم الاستجابية عند الطول الموجي (450) نانومتر وكانت تساوي الى (13.51) A/W وعند الطول الموجي (900) نانومتر وكانت تساوي الى (36.83)A/W . كما تم حساب الربحية للكاشف ووجد ان الكسب يزداد عند ارتفاع درجات الحرارة . وتم قياس تحسسية المتحسس لغاز NO2 في الهواء المحيط في منظومة استشعار الغاز . وتم فحص جميع العينات في نسبة %3 NO2 : الهواء وفولتية انحياز (6 (فولت. وكانت افضل نسبة اشابة لمحتوى المغنيسيوم %(5x=) ، ودرجة حرارة القاعدة السليكونية هي (400) درجة مئوية ودرجة حرارة تشغيل (200) درجة مئوية. وكانت اقصى تحسسية عند هذه النسبة هي (90.80)% وسرعة زمن الاستجابة هو (15.3) ثانية وزمن الاسترجاع هو (42.3) ثانية. | In this work MgxZnO1 - x thin films have been prepared using a chemical spraying pyrolysis (CSP) technique which is an easy and suitable way of deposition over large areas. Mixed solutions have been growth at different volumetric percentages (0, 30, 50, 70, and 90)% and deposited on glass and silicon substrates at temperatures (400,450, and 500) oC. The thickness was installed by installing the number of sprays. The thickness of all the films were (80 ±5) nm, have been using nitrogen gas. The crystal structure was examined by using X - ray diffraction (XRD) technique. The results showed that all the prepared were polycrystalline films, showing improvement in the crystal structure by change at temperature. Topography of the surface of the prepared films have been studied by using atomic force microscope (AFM), field emission scanning electron microscopy (FESEM), and energy dispersive X - ray spectroscopy (EDX). The increase in the percent of Mg - content in the films lead to decrease in surface roughness. (EDX) showed that films contain elements (Si, N, O, Zn, and Mg) as expected. Raman scattering have been measured for MgxZnO1 - x/n - Si thin films at different Mg - content. It exhibits two intense bands at (601 and 1202) cm - 1, corresponding to the E_2^high first - order Raman modes, and second - order mode the A1(LO) first - order mode of ZnO. As it increases Mg - content up to (50)%,the E_2^high mode the decrease in intensity. The optical properties of the films prepared by the optical transmittance measurements in the spectral region (300 - 700) nm. The results of the transmittance rang from (65 - 89)% when increasing the Mg - content from (30 to 90)% at substrate temperature of (400)oC and increased transmittance more when increase the temperature to become (84 - 95)% at the same Mg - content, which makes it suitable for applications gas sensors. Absorbance and reflectivity have been measured which were decreases by increasing temperatures. Absorption coefficient was measured for all the films, and its value more than (104) cm - 1. Direct energy gap was calculated for pure ZnO was (3.18 and 3.21 and 3.19) eV and the corresponding to substrate temperatures (400,450, and 500) oC respectively. The optical constants such as refractive index, extinction coefficient and dielectric constant have been calculated for all preparing films. The optical energy gap was calculated by photoluminescence spectrometer were few sensitive between (3.558 - 3.531) eV. The electrical properties such as D.C electrical conductivity and Hall effect have been studied, results showed measurements Hall that the pure ZnO film was negative type (n - type), while MgxZnO1 - x films were (p - type), and have two activation energies (Ea1,and Ea2). Capacity of MgxZnO1 - x/n - Si photodetector have been measured as a function of voltage reverse bias at frequency ranges (0.6 - 1) MHz. These results indicated that the photodetector is abrupt type. It was found that the value of built - in potential, decreases with increasing Mg - content and increases when Mg - content ratio (90%). The current - voltage characteristics of the MgxZnO1 - x/n - Si under dark conditions showed that forward bias current varied exponentially with voltage bias. The ideality factor and current saturation decreased with increasing Mg - content in the films whereas increased at high temperatures has been noticed. In this work the study of the spectral characteristics of the photodetector MgxZnO1 - x/n - Si and found that the spectral response values, quantum efficiency and specific detectivity increased with increasing Mg - content ratios, while the noise equivalent power (NEP) decrease when the Mg - content is increased. The beaks response appear at (450)nm equal to (13.51) A/W, and (900) nm equal to (36.83)A/W. It has been found that the gain for the MgxZnO1 - x/n - Si increases with increasing temperatures. The sensitivity of the MgxZnO1 - x/ n - Si to (NO2) gas in air ambient has been measured in the gas sensing system. All samples were tested at a ratio 3% NO2 : air and 6V bias voltage. The best ratio dopant of the Mg - content is x=(5)%, (200)oC operating temperature, and substrate temperature (400) oC of the silicon substrate. The maximum sensitivity is (90.80) % , fast response time is (15.3s) and recovery time is (42.3s).

تحضير ودراسة خواص مادة اوكسيد الرصاص النانوية == Preparation and Study of ( PbO ) Nanomaterials Properties

Author name: علي فاضل مرموص عبود
Supervisor name: عبد العزيز عبيد موسى العكيلي
General topic: Physics
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: في هذا العمل تم تحضير اغشية رقيقة من اوكسيد الرصاص (PbO) باستخدام تقنية الرش الكيميائي الحراري وهي طريقة سهلة ومناسبة للترسيب على مساحات كبيرة. استخدم كلوريد الرصاص المائي PbCl2.2H2O كمصدر للحصول على جسيمات الرصاص. تم انماء مزيج اغشية (PbO) بدرجات حرارة مختلفة °C (200, 250 ,300 , 350, 400 و450) على قواعد زجاجية وقد استخدم غاز النتروجين بضغط (4.5 بار) كغاز حامل . تم فحص التركيب البلوري للاغشية بطريقة حيود الاشعة السينية ( XRD) اوضحت النتائج ان جميع الاغشية المحضرة كانت متعددة التبلور واظهرت النتائج بان الاغشية المرسبة بـ (200 °C ) , ( (250 °C ,( 300°C) , و( 350 °C )كانت بقمة (002) بينما الاغشية المرسبة بـ (400°C و450 °C ) كانت تحمل القمة (112) القمم. في حين اظهرت النتائج وجود تحول من النظام الرباعي القائم الى النظام المعيني القائم فوق (350 °C) . درست طبوغرافية السطح للاغشية المحضرة باستخدام مجهر القوى الذرية (AFM) والمجهر الالكتروني الماسح) SEM) ومبدد الطاقة للاشعة السينية (EDX) . الحجم الحبيبي لجسيمات (PbO) النانوية وجد انه يقل بزيادة درجة حرارة السطح . ام فحص (EDX) اظهر احتواء الاغشية المحظرة على عناصرPb ) وO ) كما هو متوقع ، مشيرا الى تشكيل اغشية(PbO) نقية. الخصائص البصرية للاغشية المحضرة بسمك (177nm) تم دراستها باستخدام قياسات النفاذية البصرية في المنطقة الطيفية (250 - 760 nm) . نتائج النفاذية كانت اكبر من 80% . فجوة الطاقة المباشرة للــ (PbO) كانت ضمن مدى 1.61 - 2.80) eV) ، والتي تتزايد مع زيادة درجة حرارة السطح . الثوابت البصرية كمعامل الانكسار ومعامل الخمود وثوابت العزل تم حسابها لجميع الاغشية المحضرة . الخصائص الكهربائية مثل التوصيلية الكهربائية المستمرة وتاثير هول تم دراستها ايضا . وكانت نتائجها تشير الى ان الاغشية من النوع السالب ( n - type ) وتمتلك طاقتي تنشيط ( Ea1 , وEa2 )، وقد وجد ان التوصيلية الكهربائية المستمرة تزداد مع زيادة درجة حرارة سطح القاعدة. | In this work, thin films of lead oxide (PbO) were prepared by using a homemade chemical spray pyrolysis (CSP) technique, which is a simple, inexpensive and suitable technique for large deposition area. The lead chloride PbCl2.2H2O is used as a source of lead particles. (PbO) thin films with different substrate temperatures (200, 250, 300, 350, 400, and 450) ̊C have been grown on clean glass substrate with the nitrogen carrier gas (4.5 bar).The crystal structures were examined by X - ray diffraction (XRD) analysis. The result shows that all the prepared films are polycrystalline structure. It indicates that the films coated at 200°C, 250°C, 300°C, and 350°C are (002) oriented, while the films deposited at 400 °C and 450 °C are (112) oriented. Above 350 °C, the pure tetragonal nature deteriorated and the peaks corresponding to orthorhombic phase are observed. The surface morphology of the deposits films have been studied by using atomic force microscopy (AFM), scanning electron microscopy (SEM) and energy dispersive X - ray (EDX). The grain size of the (PbO) nanocrystalline observed at the surface decreases with increasing of substrate temperature, leads to increase in the surface roughness. (EDX) shows that all the films contain the elements (Pb and O) as expected, indicating formation of the (PbO) films with high purity. The optical properties of the films, which are prepared with thickness of (177 nm), have been determined by using the optical transmittance measurements in the spectral region from (250 - 750) nm. Transmittance results is upper than 80%. Direct energy gap for (PbO) is in the range (1.61 - 2.80)eV, it increases with increasing substrate temperature. The optical constants such as refractive index, extinction coefficient and dielectric constant have been calculated for all preparing films. The electrical properties include D.C conductivity and Hall effect are studied. The results show that the prepared films are n - type, and have two activation energies (Ea1 and Ea2). It is found that the electrical D.C conductivity increased with the increase of substrate temperature.

تصنيع ودراسة خصائص اغشية اوكسيد الباريوم الرقيقة == Fabrication and Study of Characterization of Barium Oxide Thin Films

Author name: حسن هلال حسن ونس الجناحي
Supervisor name: عبد العزيز عبيد موسى العكيلي
General topic: Physics
Specific topic: Thin Films
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: في هذه الدراسة تم ترسيب اغشية رقيقة من اوكسيد الباريوم على قواعد مختلفة تضمنت (الزجاج والسيليكون نوع (p)) والتي تم تحضيرها بتقنية الرش الكيميائي الحراري باختلاف عدد الرشات (30,20,10,5) حيث كان السمك (75,103,109, و(112 نانومتر للزجاج وبنفس عدد الرشات للزجاج كان السمك (91,74,50, و103) نانومتر للسيليكون وبدرجات حرارية مختلفة (450,400,350,300) C حيث كان السمك (71,68,65, و76) نانومتر للسيليكون وذلك لدراسة خصائص الاغشية الرقيقة وتطبيقاتها الكهرو بصريه مثل (الخلايا الشمسية والكواشف). ان الاغشية متعددة التبلور وكذلك احادية التبلور لاوكسيد الباريوم كانت تشير الى الخصائص التركيبية للاغشية الرقيقة المتمثلة بفحص حيود الاشعة السينية (XRD) , فقد كانت حساسيتها داله لسمك الغشاء ونوع القاعدة. فيما بينت قياسات مجهر القوه الذرية (AFM) ان الحجم الحبيبي يتراوح من (125.18 - 92.2) نانومتر على اعتبار ان الحجم الحبيبي يزداد مع السمك. وان فجوه الطاقة تقل بزياده السمك حيث استعمل مطياف للمدى (المرئي - فوق البنفسجي) ,كذلك تم ملاحظة ان فجوة الطاقة للاغشية الرقيقة تزداد بزياده التبلور للقاعدة. فضلا عن ان فجوة الطاقة تتراوح بين (2.6 - 2.4) الكترون - فولت لكل العينات.خصائص تيار - فولتية (في الظلام) للكواشف اظهرت خصائص جيدة للكاشف عند زيادة السمك ودرجة الحرارة. واكدت نتائج عامل المثالية هذا التحسن. خصائص سعة - فولتية اظهرت نقصان فولتية بناء الجهد البناء الداخلي بعد زيادة السمك ودرجة الحرارة. | In this study, Barium Oxide (BaO) thin films which were prepared by (CSP) on different substrates including glass substrate and p - Si wafer using chemical spray pyrolysis (CSP) technique at different thickness [different number of sprays (5, 10, 20, and 30)] at (75,103,109,and112) nm at glass substrate and (50,74,91,and103) nm respectively at silicon substrate and different temperature (300 , 350, 400 and 450) C at (65,68,71, and76) nm. (were employed to assess thin film properties and applications as optoelectronic devise (solar cells and photodetectors). The structural properties were characterized by X - ray diffraction (XRD) analysis which is indicated the formation of polycrystalline and single crystalline BaO phase. The structural properties of the thin films were found to be a sensitive function of film thickness and substrate type. Atomic force microscope (AFM) measurements show that the grain size is ranging from (92.2 - 125.1) nm. It is found that the crystallites i.e (grains) on different substrate surface increase with increasing of the thickness. The optical energy band gap (Eg) of BaO was found to be decreased with the increasing of thickness utilizing the optical data using UV - Vis spectrophotometer. The value of energy gap which is determined from UV - Vis spectrophotometer spectra ranged (2.4 - 2.6) eV for all samples.The I - V properties of the detectors in dark showed that the increased in thickness and temperature improved the junction properties, the ideality factor results asserted this improvement. The C - V characteristic shows decreasing of built in potential after the increased in thickness and temperature

قياس كثافة الطاقة الكهرومغناطيسية لابراج الموبايل مع الموقع والزمن في مركز قضاء الهاشمية ومركز ناحية المدحتية == Calculate Electromagnetic Density of Mobile Towers With the Site and Spend Time in the Hashemiyah Center and Hand Madhatiyah Center

Author name: جاسم محمد عيسى الحسني
Supervisor name: ياسين حسن كاظم
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: في هذا البحث الميداني تم قياس كثافة الطاقة للامواج الكهرومغناطيسية الصادرة من ابراج الهاتف الخلوي لمناطق محدده حيث ان هذا التحديد شمل للموقع الجغرافي والزماني ايضا وتم اختيار مركز قضاء الهاشمية ومركز ناحية المدحتية لدراسة هذا البحث. بسبب استخدام المنظومات التكنولوجية الحديثة والمعتمدة على استخدام الامواج الكهرومغناطيسية في عملها وبالاخص الهاتف الخلوي الذي اصبح جزء مهم في حياة الملايين من البشر المستخدمين لهذه التقنية اتجهت الدراسات والبحوث العلمية من قبل الباحثين الى تحديد الاضرار الناتجة من تفاعل هذه الامواج مع الانسجة والخلايا الحية في جسم الانسان. ان هذه الابحاث تعتمد كليا على كميات الطاقة المنبعثة من الابراج في تحديد نتائج البحوث . اعتمدت الدراسة المنظومة HF59B Analyses)) المصنعة من قبل الشركة الالمانية GIGAHERTZ SOLUTIONS)) والعاملة ضمن المجال الترددي (800 - 2500MHZ) واستخدم نظام (Global Positioning system (GPS في تحديد الموقع الجغرافي. تم اخذ (270) نقطة قياس في مركز قضاء الهاشمية و(202) نقطة قياس في مركز ناحية المدحتية . بينت النتائج ان اعلى كثافة طاقة سجلت في مركز قضاء الهاشمية كانت (W/m2µ 178.27) واقل كثافة طاقة (W/m2µ 0.82) . اما في مركز ناحية المدحتية فكانت اعلى قيمة لكثافة الطاقة هي (W/m2µ 192.2) واقل قيمة (W/m2µ 0.17) وهذه النتائج كانت دون القيم المذكورة في ضوابط ومحددات الامان التي وضعت من قبل المنظمات العالمية المختصة. كما تم دراسة تاثير الزمن على كثافة الطاقة (ساعات الذروة) في منطقتين مختارتين من مركز القضاء ومركز الناحية وعلى مدى ((18 ثمانية عشر ساعة. وتم حساب معامل امتصاص مواد الثرمستون ، البلوك ، الطابوق ، الطين والزجاج للاشعة الكهرومغناطيسية الصادرة من ابراج الهاتف الخلوي. على ضوء النتائج المستحصلة تم رسم اول خريطتين راديويتين لمركز قضاء الهاشمية ومركز ناحية المدحتية | Because of the use of modern technological systems and based on the use of electromagnetic waves in their work and in particular, the cell phone, which has become an important part in the lives of millions of users humans to these technical studies and scientific research headed by researchers to determine the damages caused by these waves interact with tissues and living cells in the human body. This research depends entirely on the amount of energy emitted from the towers in determining the results of the research. In this research was to measure the energy density of electromagnetic waves released from the cell phone towers to specific regions where the ability of this selection included geographical location and temporal, and also was selected to spend the Hashemiyah center and hand Madhatiyah center for the study of this research. The study relied (HF59B Analyses) system manufactured by the German company (GIGAHERTZ SOLUTIONS) and operating within the frequency range ( 800 - 2500MHZ ). Use the system (Global Positioning system (GPS)) in geolocation . Results show that the highest the highest energy density recorded in the district was the center of the Hashemiyah (178.27 µw/m2) and lower density (0.82 µw/m2). But in terms of Madhatiyah center was the highest value for the energy density is (192.2 µw/m2) and the lowest value (0.17 µw/m2), and these results were below the values listed in controls and the determinants of safety that have been developed by the competent international organizations. Also studied the effect of time on the energy density (peak hours) in two electives from the district center and the center and over (18) eighteen - hour. Finally, the absorption coefficient was calculated Althermiston materials, blocks, bricks, clay and glass electromagnetic radiation released from the cell phone towers.

تحضير وخصائص اغشية SnO2 : Co الرقيقة النانوية التركيب بتقنية التحلل الكيميائي الحراري == Synthesis and Characterization of Nanostructure SnO2 : Co Thin Films Prepared by Chemical Spray Pyrolysis Technique

Author name: اماني علي صكب عبيس
Supervisor name: ناهدة بخيت حسن
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: تم تحضير اغشية ثاني اوكسيد القصدير النقية والمشوبة بالكوبلت ذات الشفافية والتوصيلية العالیة على قواعد زجاجیة بدرجة حرارة(673±10)K وبمعدل رش 4 ثواني لكل دقيقة وبزمن ترسيب قدره 25 دقيقة باستخدام تقنیة الرش الكیمیائي الحراري لمحلول رابع كلورید القصدیر المائي. تمت دراسة الخصائص التركیبیة والبصریة والكهربائية والتحسسية للاغشیة المحضرة عند تراكيز مختلفه للكوبلت((2,4,6 and 8%. تم فحص التركيب البلوري للاغشية بطريقة حيود الاشعة السينية (XRD) واوضحت النتائج ان جميع الاغشية المحضرة كانت متعددة التبلور ذات تركيب رباعي وان الحجم الحبیبي يزداد بزیادة تركیز الشوائب وان بعض الخصائص التركیبیة تتغیر باضافة الشوائب ولها اتجاه تفضیلي باتجاه المستوي (110) ، تمت دراسة طوبوغرافیة وخشونة السطح باستخدام مجھر القوة الذریة(AFM) حيث بينت النتائج زيادة الحجم الحبيبي مع زيادة تركيز الكوبلت وكذلك زيادة الخشونة مع زیادة تركیز الشوائب لغایة (4%) حيث يصل الى اقصى قيمه ((77.2 نانومتر. بينما يقل عند زيادة تركيز الشوائب اكثر من (4%). الخصائص البصرية للاغشية المحضرة بسمك (160 ± 3 nm) تم دراستها باستخدام قياسات النفاذية البصرية في المنطقة الطيفية (300 - 1100 nm) ، وبینت النتائج ان زيادة التشويب ادت الى نقصان في النفاذیة وفجوة الطاقة وزیادة في معامل الامتصاص. الخصائص الكهربائية تشمل التوصيلية الكهربائية المستمرة وتاثير هول. اشارت النتائج ان الاغشية تمتلك طاقتي تنشيط ( Ea1 , Ea2 )، وقد وجد ان التوصيلية الكهربائية المستمرة تزداد مع زيادة النسب الحجمية للكوبلت وكانت توصيلية جميع الاغشية من النوع السالب ((n - type. من خلال قياسات الخصائص التحسسية للاغشية الرقيقة لغاز ( NO2 ) اظهرت تحسسية جيدة عند حرارة تشغيل (200)oC وقد وجد ان افضل تحسسية تم الحصول عليها للاغشية الرقيقة هي82.196% عند نسبة تشويب 2%Co. | Highly transparent and conductive thin films of SnO2 and SnO2 : Co have been prepared on glass substrates at temperature (673 ±10) K with spray time 4s for each minute and deposition time 25 minute. Using spray pyrolysis technique from SnCl4.5H2O precursor. Structural , optical, electrical and sensing properties were studied under preparation conditions like doping concentration of cobalt (2,4,6 and 8 Vol.%). The structural properties were characterized by X - ray diffraction (XRD) analysis, the result has shown that all the prepared films are polycrystalline with a tetragonal crystal structure and the films are preferentially oriented along the (110) direction. The surface morphology of the deposits films has been studied by using atomic force microscope (AFM), the results has shown increasing of the grain size with increasing of Co concentrations, the surface roughness increased with increasing Co concentrations and reached a maximum of (77.2) nm at 4 Vol.%. while, it has decreased with further increases in concentration (higher than 4 Vol.%). The optical properties of the films, which were prepared with thickness of (160 ± 3) nm, have been determined by using the optical transmittance measurements in the spectral region from 320 nm to 1100 nm. The results have shown that the doping caused to decrease the transmittance and energy gap while it has caused to increase the absorption coefficient. The electrical properties included D.C conductivity and Hall effect have been studied. The results have showed that the prepared films are n - type , and have two activation energies (Ea1 , Ea2) . It has been found that the electrical D.C conductivity increases with increasing of the Co concentration. From the sensing properties measurements of thin films for ( NO2 ) gas it is shown that the films is a good sensor to this gas. It is found the best sensitivity of thin films is 82.196% at doping concentration 2%Co

دراسات نظرية وعملية لانتشار النبضة الليزرية في الليف احادي النمط == Theoretical and Experimental Studies of Laser Pulse Propagation in a Single Mode Fiber

Author name: لبنى عباس محمد البصام
Supervisor name: نزار سالم شنان
General topic: Physics
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: العديد من الظواهر الفيزيائية تؤثر على جودة الاشارة البصرية المنتقلة خلال الليف البصري, كالاستقطاب والذي له تاثير مهم على انتشار النبضة البصرية في الليف احادي النمط من خلال تشتت النمط المستقطب, والخسائر المعتمدة على الاستقطاب, وظاهرة اخرى تعتمد على التردد ولها تاثير اساسي هي التشتت اللوني . كل هذا يؤثر على شكل النبضة البصرية ودقة الاشارة المحمولة, والتي تم التحقق منها في هذه الدراسة وايجاد صيغة رياضية جديدة لوصف المنظومة البصرية . في هذا البحث درس عمليا تاثير الظروف (الانحناء, التسخين, الضغط) على الاشارة المنتقلة خلال الليف البصري احادي النمط, ونظريا تم دراسة تاثير الظواهر على شكل النبضة المنتقلة, وهذه الظواهر هي ((PMD,PDL,CD ولثلاثة اطوال مختلفة لليف البصري . من النتائج العملية الموضحة انه بزيادة قطر الانحناء لليف البصري من (6.5 الى 35) سم, فان ظاهرة التشتت سوف تقل ,و من دراسة تاثير التسخين على شكل النبضة المنتقلة لاحظنا حدوث توهين وتشوه في شكل النبضة المنتقلة عند زيادة درجة الحرارة ,بينما حجم البقعة سوف يزداد بزيادة الضغط على الليف البصري ,و عمليا تم دراسة العلاقة بين الخسائر والقدرة لمنظومة الاتصلات البصرية ولاطوال مختلفة (1310, 1550)nm مع تغيير عدد اللفات (6,7,19,25) وقطر الانحناء (1,2,5.6,5.8) سم. نظريا تم دراسة تاثير الظواهر (PMD,PDL,CD) على شكل النبضة الخارجة ولثلاثة اطوال لليف البصري (25,50,75)Km بواسطة بناء برنامج محاكاة ( ماتلاب ) , بينت النتائج انه بزيادة طول الليف البصري احادي النمط سوف يزداد تاثير ((PMD,PDL,CD. | Numerous physical phenomena effect on the optical signal quality transmitted through an optical fiber, such as polarization that has an important effect on the optical pulse propagation in single mode fiber through PMD (polarization mode dispersion), and PDL (polarization depend losses), another phenomenon which is frequency dependent and has a major effect is the chromatic dispersion (CD). All these effects on the optical pulse shape and the carried signal fidelity, have been investigated in this study and finding new mathematical formula to describe the optical system.This work has practically studied the circumstances effect (bending, heating, and pressure) on a travel pulse through a single mode optical fiber, and theoretically has studied the effect of phenomena on a pulse shape transmitted, and these phenomena are (PMD, PDL, and CD) and for three different length of optical fiber. From the practical results that were obtained, it was observed that by increasing the bending diameter of optical fiber from (6.5 to 35) cm, the phenomenon of dispersion will be reduced and from studying the effect of heating on a pulse shape transmitted, it was noted that attenuation and deformation will happen on the shape of the pulse transmitted by increasing the temperature, while the spot size will increase by increasing the pressure on the optical fiber, and it has practically studied the relation between the losses and the power for an optical communication system for different wavelengths (1310, 1550) nm, with changing the number of laps (6, 7, 19, 25) and bending diameter (1, 2, 6.5, 8.5) cm. It has theoretically studied the effect of the phenomena (PMD, PDL, and CD) on an output pulse shape with three different length to the optical fiber (25,50, 75) km by building the simulation program using (MATLAB), the results showed that the increase in the length of the single mode optical fiber will increase the impact of (PMD, PDL, and CD).

تشخيص تصلب الشرايين باستخدام معالجة الصور الرقمية == The Diagnosis of Atherosclerosis Using Digital Image Processing

Author name: عبد الكريم صكر كمر
Supervisor name: حازم باقر طاهر العلي
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Dhi Qar
First pages:
Abstract: Accelerating the pace of scientific progress and that focus in the field of human service requirements is to provide daily health and service. Health aspect is one of the most important themes of science that needs to be searched because it has a direct impact on human existence. Medical Physics is one of the branches of the Physics Department that deals with the interest of providing theoretical or scientific foundations which had the aims to provide scientific services in the medical field. The subject of the medical image processing is one of the applications of this section. It aims to increase the efficiency of medical diagnostic systems to provide an integrated diagnostic system that works to distinguish a heart disease and atherosclerosis.This study depends on medical images that were obtained from patients in Nasiriyah Heart Center. Where thesis focus on images for arteries feeding heart muscle for Infected patients and other healthy. Set of operations were performed on these images derived from work areas and the separation arteries of these areas from the rest of unimportant information within the image To be brought into the neural network, the use of 110 image to train the network 60 and 50 were used for the test.The next step is to count the number of qualities for each image after it has been extracted artery of the image by making some operations on this image .The proposed system has proven successful in the conduct of the diagnostic process through the results obtained on the ratio of 100% in the training phase and 92% in the testing phase

دراسة وتحضير خلية شمسية صبغية ذات تركيب صلب باستخدام صبغة نوع D146 ثنائي اوكسيد التيتانيوم كانود وانابيب الكاربون النانوية متعدد الجدار ككاثود == Study and Preparation of Solid State Dye Sensitized Solar Cell using D149 as a dye ,TiO2 Nanoparticles as a Photo anode and MWCNTs as a Counter Electrode

Author name: ايات عبد علي كطان
Supervisor name: سامر مهدي عبد المحسن
General topic: Physics
Specific topic: Solar Energy Physics
Degree: Master
Language: English
University location: Dhi Qar
First pages:
Abstract: The dye sensitized solar cell (DSSC) is one of the photochemical electric cells, which consists of the photo electrode, dye, electrolyte, and the counter electrode. The advantage of DSSC is the low cost of the solar energy conversion into electricity because of inexpensive materials and the relative ease of the fabrication processes. In this work, titanium dioxide (TiO2) films as a photo electrode were prepared from anatas titanium Oxid (TiO2) nanoparticles and deposited by doctor blade method on fluorine doped tin oxide (FTO)coated glass substrates. After the process of deposition that including the prepared samples in the oven, the temperature raises from room temperature (R.T) to set up to around 400°C. Half an hour later, the temperature started to decrease to reach theroom temperature (R.T) . Multi - walled carbon nanotubes (MWCNT)used as a counter electrode instead of platinum(Pt),where prepared by spray pyrolysis technique (SPT) at 300°C,10 sec as spraying time ,and 60 sec stopped time. In the next step, Preparing the dye solution at room temperature then placed TiO2 electrode in the dye solution for 24 hours in the dark .The last step is collecting two electrodes one over the other leads to build a solar cell. Then a mixture electrolyte about(0.6 M 1 - methyl - 3 propoylimidazolium iodide (PMII) + 0.1 M LiI )is dipped onto the surfaces of both (FTO glass/TiO2NP/D149/PMII and MWCNTs/FTO)glasses .The thickness about (400nm) and the films are prepared under various deposition conditions in order to understand the effect of the temperature on the cell properties and to specify the optimum condition. X - ray diffraction (XRD), scanning electron microscope (SEM) are used for the structural analysis.Raman scattering spectrum used to determine the type of material CNTs used for DSSCs fabrication , Fourier transform infrared spectroscopy (FTIR) used for description as an analysis for system chemical structure of the atoms. UV and visible spectra have been recorded as a function of wavelength in the range (200 - 1000 nm) in order to study the optical properties such as reflectance, energy gap of allowed and forbidden direct transitions, extinction coefficient, refractive index, and dielectric constant in real and imaginary parts. It has been found that all the investigated parameters are affected by the sensitizer dye in the visible region of the spectrum .Finally I - V characteristic curves of the fabricated cell were measured and studied, this cell shows highest photovoltaic performances to date as Solid state dye sensitive solar cells

الاستقرارية البصرية في زوج من التراكيب النقط الكمية == Optical Stability in Double Quantum Dot Structures

Author name: نرمين عبد الخالق كامل
Supervisor name: امين حبيب السيد جاسم
General topic: Physics
Degree: Master
Language: English
University location: Dhi Qar
First pages:

التحقق من اداء منظومة ليزر التحويل السلبي لعامل النوعية المقترنة بوسط رامان == Investigation of Laser system performance of passive Q - switching with intracavity Raman medium

Author name: سالي باسم كاظم
Supervisor name: عبد الكريم مهدي صالح النيازي
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Dhi Qar
First pages:
Abstract: The performance of passive Q - switching with intracavity laser system to generate high power pulses have been investigated .The considered laser system consists of Nd : YVO4 , Cr4+ : YAG, and BaWO4 as a active medium, saturable absorber material, and Raman medium respectively to generate high power pulses . A computer program has been employed to solve the rate equations which are simulates the system performance numerically by Rung - Kutta - Fehelberg method. So, the results of the numerical solution have been utiliza to calculate the photons losses behavior in order to study the effects of these losses in the system performance.Raman spontaneous scattering factor ( ) sp k effect on high power pulses characteristics has been studied. There is a small increasing in the duration of the passive Q - switching pulse and stability in duration of stokes pulse when the factor ( ) sp k become high value. According to the current study, the reason of this behaviour is related to the small increasing in the falling time of passive Q - switching pulse and the semi stability in the falling time of passive Q - switching pulse . So, the mentioned aspect demonstrates the increasing in the pulses energy. The study explain that as an outcome high density of the pulses photons .Also the study shows the power of pulses is increasing with Raman spontaneous scattering factor value.In the study aspect which concern the losses behaviour in term of Raman spontaneous scattering factor, the study shows that the decreasing in the final value of total photon loss with Raman spontaneous scattering factor. The study related that to decreasing which occur in the density number of the ground state of SAM ions , that lead to decrement in its absorption activity, this is dominators of the increment in the excited stateof SAM absorption activity according to the difference values ofabsorption cross sections of levels.Output coupler mirror reflectivity on Raman laser pulse characteristics has been studied, the study illustrate that the broadening in the duration of Raman laser pulse whenever the value of output coupler reflectivity at Raman photons ( ) R R increases, the study explains that related to the broadening in the falling time of the pulse. Concerning the pulse energy, the study demonstrates the increase which occurs in the energy of Raman laser pulse with increase of the output coupler reflectivity at Raman photons ( ) R R , the study related that to increase in the photons density. A according that mentioned the study illustrate the increase in the power of Raman laser pulse with the increase of the output coupler reflectivity at Raman photons ( ) R R .Finally, the study arrives to concludes that the passive Q - switching laser system of Nd : YVO4, Cr : YAG, with intracavity Raman medium (BaWO4) crystals which takes into account characterized by compatible performance to obtain high power pulses. So, the Raman media which are distinguished by high spontaneous scattering factor are more efficient to realization high power Raman laser pulses. In addition, the quality factor of resonator is found tobe proportional with the spontaneous scattering factor of Raman medium.

استجابة التضمين والضوضاء في قفل الحقن لليزرات التعاقب الكمي == INTENSITY MODULATION RESPONSE AND NOISE IN INJECTION - LOCKING QUANTUM CASCADE LASERS

Author name: اخلاص عبد العالي حسين
Supervisor name: حسين هادي وارد
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Dhi Qar
First pages:
Abstract: In communication field, there are many advantages for using terahertz carriers in optical data transmission along both analog and digital links such as small antenna sizes and large information bandwidth. The optical injection locking is an alternative technique to improve the dynamic properties of QCL light sources. In this technique the frequency and phase of one laser oscillator, known as the slave laser, are locked through the direct coupling to the light injection from another laser oscillator, known as the master laser. In this work, the optical injection locking induced laser dynamics in a QCL is investigated theoretically. The present theoretical analyses are based on the rate equations model that takes into account all carrier relaxation processes as well as the effect of the optical injection locking. The small signal analysis is used to calculate the intensity modulation response and intensity noise in QCL. The present analysis focuses on the effect of carrier relaxation time and the optical injection locking on the dynamic properties in these devices. The results show that the optical injection locking and fast carrier relaxation time can enhance the dynamic properties and decreases noise value and increases the modulation bandwidth in these advanced lasers. The optical injection locking increases the carrier density in active region to suppress the effect of fast carrier scattering to lower state and enhances the stimulated emission. The fast carrier relaxation times decreases the threshold injection current. Also, in optical injection operation, the active region length and linewidth enhancement factor has strong effect on the intensity modulation response and intensity noise.

بناء منظومة البلازما الضغط الجوي الغير حرارية للتطبيقات الطبية الحيوية == Construction of Non - thermal Atmospheric Pressure Plasma System for Biomedical Applications

Author name: علي فاضل محمد هاشم
Supervisor name: فاضل خدام فليفل | محمد خماش خلف
General topic: Physics
Specific topic: Plasma Physics
Degree: Master
Language: English
University location: Karbala
First pages:
Abstract: Recently, the atmospheric pressure non - thermal plasma has attracted great attention in biomedical applications due to the advantages of high e ciency, safety, no toxic residue and low cost. In this work, a homemade plasma jet system was constructed. The system which used in this work was a dielectric barrier discharge (DBD) type atmospheric pressure plasma jet (APPJ). It was applied to generate a non - thermal plasma using an alternating current (AC) power supply (providing voltages up to 7.5 kVp????p and frequencies up to 12 kHz) with two types of noble gases (argon and helium). The system was based on two electrodes con guration, where the rst con guration based on ring - to - plate electrodes structure and the second on double - ring electrodes structure. Each con - guration used two types of Pyrex tube with wall thickness of 3 mm and 0.95 mm. It was found that the ring - to - plate electrodes structure with tube wall thickness of 3 mm generate plasma at high temperature (48.5 C) while, the plasma temperature decreased to 46 C when thetube wall thickness reduced to 0.95 mm. In contrast, the double - ring electrodes structure did not generate plasma when using a tube with wall thickness of 3 mm but, when the tube wall thickness reduced to 0.95 mm, plasma generated at low temperature (34.5 C). The electrical characteristics was investigated to describe the discharge of the argon and helium plasma jets. It was found that the ignition voltage for the helium plasma (4 kVp????p) was lower than the ignition voltage for the argon plasma (4.7 kVp????p). Also through the current discharge, it was con rmed that the plasma system safe and prevents any arcing.The in uence of the higher gas ow rate lead to increase of the plasma plume length and reduction of the plasma jet temperature. The maximum plume length of argon plasma was 23 mm and the temperature at this length was 34 C under the system conditions of 12 kHz, 7.5 kVp????p and gas ow rate of 4 standard litre per minute (slm). In contrast, the maximum plume length of helium plasma was 44 mm and the temperature at this length was 27 C under the same system conditions.The plasma jet was diagnosed by optical emission spectroscopy (OES) to calculate the electron temperature (Te) and density (ne). As well, the presence of active species such as reactive oxygen and nitrogen species (RONS) was con rmed by OES. The lines intensity of the active speciesfor argon and helium plasma jets showed variations in quantity and qual -

تحضير جسيمات ثنائي اوكسيد التيتانيوم النانوية بطريقة الصول - جل باستخدام الازالة بالليزر وتطبيقاته كاصباغ نانوية == Synthesis of TiO2 Nanoparticles by Sol - Gel Method using Laser Ablation for Nano Paint Application

Author name: زينب ناصر جميل
Supervisor name: سمر يونس طه | عدوية جمعة حيدر
General topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: Titanium dioxide (TiO2) nanoparticles (NPs) have been widely investigated to employ in the paint fields due to its importance as pigments. Therefore, TiO2 particles are perfect candidates in the paint industry. In addition to use nanoparticles for enhancing the local coating properties in our country.In this work, the sol - gel technique employed to prepare TiO2 nanoparticles with two procedures and two precursors (TIP and TiCl4), the obtained two phases of TiO2 (anatase and rutile), nanopaticles colloid irradiated by pulse laser ablation (PLA) for minimizing particle size. It has been fabricated a laboratory paint (TiO2/SiO2 hybrid sol - gel). Nanoparticles characterization has been carried out by different devices to study properties such as morphology, structure and optical properties, Transmission Electron Microscope (TEM) and Dynamic Light Scattering (DLS) demonstrated the size and shape of nanoparticles in the range of (3 - 40) nm spherical for anatase, while the rutile results were around (50 - 70) nm with ellipsoidal shape. Scanning Electron Microscopy (SEM), which was confirmed the results of TEM and DLS. Zeta - potential (ζ) results which were indicated the colloid stability, surface charge for the first procedure and the second procedure, anatse and rutile (+39.02, +25.68,+41.31 and+34.33) mV, respectively. The structural characteristics of TiO2 nano - powder investigated by X - ray Diffraction(XRD) to define the phases of TiO2, anatase at 500˚C , rutile at 900˚C, and Raman Spectroscopy to distinguish between crystalline phases, Raman shift resulted for anatase about (142.1,411.1,547.4 and 669.6) cm - 1, rutile (190,272,452 and 616) cm - 1. The optical properties measured by UV - Vis. Spectrophotometer to compute the energy band gap for both phases at (3.8 eV) for anatase and (3.4 eV) for rutile.The nanoparticles were mixed with coating solution (i.e. hybrid sol - gel and organosilicate nanoparticles (OSNP) in different concentrations (1%wt and 10%wt) for both anatase and rutile. Films were prepared by spin coating method which has been studied by the Energy Dispersive X - ray Spectroscopy (EDS) / Scanning Electron Microscope to define the components of concentrations, additionally, the films were studied the thickness and refractive index (n) by Spectroscopic Ellipsometry(SE) for nano - anatase (1%wt and10%wt) films thickness (128,382)nm and n equal (2.25,3.32), for nano - rutile films thickness (313.5,645.2) nm and n equal (2.5,2.8). Profilometer investigated the coating topography to demonstrate the Root Mean Square (RMS) toidentify the roughness which increased by increasing particle size. Fourier Transform Infrared (FTIR) analysis showed the strong bonds of the nanoparticles in frequency region between (400 - 1000) cm - 1 corresponds to Ti - O - Ti, also the bands at 793 and 1100cm - 1 were for a symmetric Si - O - Si stretching and vibration, respectively.Self - cleaning tests on the films were performed using Rhodamine B (RhB) as a pollution indicator. The effect of UV - irradiation on the films and contact angle measurements were studied. Anatase and rutile incorporated as a mixture with different ratios (1%.1.5% and 2%) in the local paint measurements, such as a washability and contrast test.Antibacterial activity in 10 - 5 and 10 - 3 TiO2 concentrations exhibited superior antibacterial activity with two types of bacteria, Escherichia coli (E - coli) and Staphylococcus aurous (S. aureus), respectively. TiO2 nanoparticles were more efficient as antibacterial agents with Staphylococcus aurous as compared with E - coli.

دراسة نظرية لعملية انتقال الالكترون خلال بعض التراكيب النانوية == Theoretical Study of Electron Transport Through Some Nanoelectronic Structures

Author name: محمد عبد الامير عباس
Supervisor name: فلاح حسن حنون | لافي فرج البدري
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Dhi Qar
First pages:
Abstract: The present work is a theoretical study for the electronic properties of the electron transport process throughout some molecular structures. The investigated system is a left lead - donor - molecule - acceptor - right lead. The investigate molecule is one of the following structures (Phenyl, Biphenyl, Triphenyl, Naphthalene, Anthracene and Phenanthrene).A theoretical treatment of steady - state has been presented to express the transmission probability of the electron transport throughout ring structures. The Hamiltonian describing the system is the Anderson - Newns Hamiltonian with neglecting the spin and Coulomb interactions on the system. The treatment easily includes a magnetic flux effect on the transport process for any ring structure. Furthermore, the most important effects, taking into consideration, are quantum interference, gate voltage and bias voltage. The transmission probability is employed to calculate the conductance and electric current.Density functional theory (DFT) has also been used to calculate electronic properties of considered molecules, especially on the energy - band gap and density of states, and the distribution of electronic density (HOMO and LUMO). It has been ensured that all studied systems simulated using Caussian program 09 can be fabricated by utilizing their computed total energy.The quantum interference effect at typical values of magnetic flux was utilized to design quantum logic gates (XNOR gate and NAND gate) and nanoscale rectifier (half - wave rectifier and full - wave rectifier).

تاثير امتزاز الغاز على الخصائص الالكترونية والتركيبية للجرافين المطعم == Effect of the Gas Adsorption on the Electronic and Structural Properties of Doped Graphene

Author name: صلاح عبد المهدي خضير
Supervisor name: حمد رحمن جبر
General topic: Physics
Specific topic: Electronics Physics
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: تم حساب حساسية الجرافين النقي (PG) والجرافين المطعم بالنتروجين (N - doped graphene) والجرافين المطعم بالالمنيوم (Al - doped graphene) لسلسلة من جزيئات الغازات الصغيرة وهي CO وCO2 وNH3 وNO وNO2 وSO2 باستعمال برنامج كاوسين 09 الذي يطبق نظرية الكثافة العملية (DFT) بدالة Perdew - Burke - Ernzerhof (PBE) ومجموعة الاساس 6 - 31G. وقد تم استقصاء تاثير التطعيم بواسطة تغيير تركيز ذرات التطعيم بنسبة 2.4 % (بمقدار ذرة واحدة من النتروجين او الالمنيوم في 42 ذرة مضيفة). اظهرت النتائج ان امتزاز CO وCO2 وNH3 وNO وNO2 وSO2 على سطح الجرافين النقي والجرافين المطعم بالنتروجين يكون امتزاز فيزيائي ضعيف وبطاقة امتزاز (Ead) تتراوح بين eV (0.115 - الى 0.640)، باستثناء امتزاز الغازات NO2 وSO2 على الجرافين النقي التي يكون امتزازها كيميائي قوي، في هذه الحالة، الجرافين النقي يكون محفز او منشط، وهذا يقترح امكانية استعمال الجرافين النقي كمحفز خالي من المعدن. كذلك، يكون امتزاز NO2 وSO2 على الجرافين المطعم بالالمنيوم امتزاز فيزيائي ضعيف وبطاقة امتزاز تتراوح بين eV (0.298 الى 0.611)، وبعبارة اخرى يمكن ان يستعمل الجرافين المطعم بالالمنيوم كمتحسس جيد لغازات NO2 وSO2. على اية حال، يكون امتزاز الغازات CO وCO2 وNH3 وNO على الجرافين المطعم بالالمنيوم امتزاز كيميائي قوي وبطاقة امتزاز اكبر من eV1، ونتيجة لهذا التفاعل القوي فان الجرافين المطعم بالالمنيوم يكون محفز او منشط، وهذا يقترح امكانية هذا الجرافين كمحفز. علاوة على ذلك، تكون فجوة الطاقة (Eg) مفتوحة وبطرق مختلفة للجرافين النقي والجرافين المطعم بالنتروجين والجرافين المطعم بالالمنيوم عند امتزاز الغازات CO وCO2 وNH3 وNO وNO2 وSO2. كذلك، فان الجرافين المطعم بالنتروجين الممتز بجزيئة غاز SO2 له القدرة على منح الكترون، لانه يحتاج الى طاقة صغيرة لازالة الكترون ليصبح ايون موجب. تظهر الدراسة امكانية تطبيق الجرافين النقي كمتحسس جيد لغازات CO وCO2 وNH3 وNO والجرافين المطعم بالنتروجين كمتحسس جيد لغازات CO وCO2 وNH3 وNO وNO2 وSO2. توضح نتائجنا ان الخصائص الالكترونية للجرافين يمكن ان تعدل (تطور) بتطعيمها بالنتروجين والالمنيوم والامتزاز بالغازات لتستعمل لتصميم متحسسات كيميائية، وبالتالي يمكن ان يستخدم الجرافين لبناء متحسسات لاكتشاف جزيئات مخصصة. | The sensitivity of pristine graphene (PG), nitrogen - doped graphene (N - doped graphene) and aluminum - doped graphene (Al - doped graphene) toward a series of small gas molecules CO, CO2, NH3, NO, NO2 and SO2 by using Gaussian 09 program which applies the density functional theory (DFT) with Perdew - Burke - Ernzerhof (PBE) functional and 6 - 31G basis set. The effect of doping was investigated by varying the concentration of doping atoms 2.4% (one atom of nitrogen or aluminum in 42 host atoms). The results show that the adsorptions of CO, CO2, NH3, NO, NO2 and SO2 on PG and N - doped graphene are weak physisorption with an adsorption energy (Ead) ranging from ( - 0.115 to 0.640) eV, except the adsorption of NO2 and SO2 on PG are a strong chemisorption, in this case, the PG could catalyse or activate, suggesting the possibility of PG as a metal - free catalyst. Furthermore, the adsorptions of NO2 and SO2 on Al - doped graphene are weak physisorption with a Ead ranging from (0.298 to 0.611) eV, otherwise Al - doped graphene could be a good sensor for NO2 and SO2. However, the adsorptions of CO, CO2, NH3 and NO on Al - doped graphene are a strong chemisorption with Ead larger than 1 eV, due to the strong interaction, Al - doped graphene could catalyse or activate, suggesting the possibility of Al - doped graphene as a catalyst. Moreover, the energy gap (Eg) of PG, N - doped graphene and Al - doped graphene is opened upon adsorption of CO, CO2, NH3, NO, NO2 and SO2 in various ways. Also, the N - doped graphene with SO2 gas molecule adsorption has the ability to donating an electron, it needs a small energy to remove an electron to become a cation. The study demonstrates the feasibility of PG to be a good sensor for CO, CO2, NH3 and NO and N - doped graphene could be a good sensor for CO, CO2, NH3, NO, NO2 and SO2. The results reveal the electronic properties of graphene which modified by nitrogen and aluminum doping and molecules adsorption, that could be used to design chemical sensors, and graphene could be used to build sensors for the detection of particular molecules

تحضير ودراسة الخواص البصرية والكهربائية للمتراكبات البوليورية النانوية المواصلة PANI - DBSA/ MWCNTs وتطبيقاتها في الخلايا الشمسية == Preparation and Study The Optical and Electrical Properties of Nanocomposite (PANI - DBSA / MWCNTs) and Application in Solar Cell

Author name: هناء هاشم عناية
Supervisor name: كريمة مجيد زيدان
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Basrah
First pages:
Abstract: The present thesis Conducts polymer (polyaniline) doped with Dodycyl Benzene Sulfonic Acid (DBSA) was prepared by chemical polymerization and with the help of ammonium persulphat (NH4)2S2O8 as oxidizing agent.Multi well carbon tubes MWNTs are ultrasonically treated with strong acide using a 3 : 1 mixture of concentrated H2SO4 and HNO3, producing carboxylic groups c - MWNTs .Nanocomposite conducting polymers PANIDBSA/ MWCNTs was prepared with adding different weight ratios (0%,1%,2%,3%,5%)(MWNCTs to PANI - DBSA). Accordingly, films of these nanocomposite polymer were prepared by spin coating technique .To study the optical properties, these films were deposited on glass, and on interdigitated finger electrode for the - electrical properties.The chemical structure of the prepared polymers PANI - DBSA, c - MWNCT and PANI - DBSA/MWCNTs are characterized by the FTIR spectra .The results indicated an appearance of functional group of doping with DBSA and MWNCTs changed to c - MWNCTs.The structure of preparation films are characterized by X - RAD diffraction .The results show crystalline peaks partial crystallinity of the PANI - DBSA/MWNCTs. The grain size of polymer was calculated by Scherrer relation.Morphologies and diameters of the nanocomposite were studied by Atom ic Force Microscope(AFM) and Scanning Electron Microscope (SEM). The average diameters of nanocomposite change between (81 - 118) nm and the roughness increased with increasing of MWNCTs in nanocomposite. Ology and the thickness were measured by Scanning Electron Microscope (SEM).The result shows the polymer covered MWNCT.The optical properties of preparation film were studied from absorbance spectra at wave - lengths of (300 - 1100 nm). The analyses of optical measurement shows direct transition with energy gap decreasing increases MWNCTs about(3.4 - 1.9) eV. The reflection spectrum is analysed to find same optical constant like extension coefficient and refraction coefficient.The electric conductivity was measured and it was found that the thin films correlate with the ohmic behaviour at voltage under 10V.The electricalconductivity increases as the ratios of MWNCTs increases in PANIDBSA/ MWNCTs nanocomposite from(6.17x10 - 3 S/cm ) at 0wt% to (1.12x10 - 1 ????/cm ) at 5wt% .The effect of temperature on the electric conductivity of all ratios of thenanocompositesare also studied. The resultindicated the activationenergy decrease as MWNCTs increase from 0.15 at (0wt %) to 0.05 at (5wt %).In electronic applications of nanocomposite conducting polymers solar cell,two kinds of solar cells (ITO/TiO2/PANI - DBSA/MWCNTs/C/ITO ) and (ITO/TiO2/PANI - DBSA/MWCNTs/dye/C/ITO) were fabricated. The currentvoltage characteristics are measured at light source 100mw/cm2.The solar cell parameter like open circuit voltage VOC ,short circuit current JSC, shunt resistance RSh, series resistance RS, full factor FF, and efficiency η, are calculated. The efficiency of solar cell at different ratios of MWNCTs in PANI - DBSA/MWNCT were calculated. The result indicated that the efficiency increased as MWNCTs increase. The efficiency of solar cells also increases with adding dye.

دراسة الخواص التركيبية، الالكترونية والطيفية لشرائط الكرافين النانوية == Study of the Structural, Electronic and Spectroscopic Properties of Graphene NanoRibbons

Author name: ايات عبد السادة يوسف طعيمه
Supervisor name: حامد ابراهيم عبود محمد التميمي | رباب سعدون عبدون
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: تركز هذه الرسالة على معالجة الميكانيك الكمي للخواص التركيبية والالكترونية لشرائط الكرافين النانوية. تم استعمال نظرية دالية الكثافة مع الدالة الهجينة لي - يانغ - بار ذات المعاملات الثلاث والدوال الاساس 6 - 31G لتخمين التراكيب المقسمة الى اربع مجاميع وهي شرائط الكرافين النانوية النقية كمجموعة اولى وثانية، شرائط فلور - وكلور - كرافين النانوية كمجموعة ثالثة، وشرائط اوكسيد الكرافين النانوية كمجموعة رابعة. تشتمل الحسابات على معرفة تاثيرات عرض الشرائط النانوية واضافة ذرات مختلفة على الخواص التركيبية والالكترونية لشريط الكرافين النانوي. تم تصميم التراكيب المدروسة باستعمال برنامج Nanotube Modular وتطبيق حسابات نظرية دالية الكثافة باستعمال برنامج Gaussian 09 . ان الحسابات التخمينية للتراكيب النانوية تعتبر اداة مفيدة لتخمين الخواص التركيبية والالكترونية لهذه التراكيب قبل تحضيرها ودراستها مختبريا. تتضمن الخواص التركيبية المحسوبة كل من المعاملات الهندسية للتراكيب والاحداثيات القياسية لجميع الذرات في كل تركيب. وتتضمن الخواص الالكترونية كل من الطاقة الكلية، الحالات الالكترونية (طاقات المستوي الجزيئي العلوي المشغول والمستوي الجزيئي السفلي الفارغ)، فجوة الطاقة، بعض المتغيرات الالكترونية، الكثافة الالكترونية الكلية، الجهد الكهروستاتيكي، كثافة الحالات، عزم ثنائي القطب والاستقطابية الجزيئية واطياف الاشعة تحت الحمراء الخاصة بتلك التراكيب. تم حساب المتغيرات الالكترونية مثل طاقة التاين، الالفة الالكترونية، الكهروسالبية، المرونة الالكترونية، الصلادة الكهروكيميائية ومعامل التالف مع الاوساط طبقا لما يسمى نظرية التعامد المداري ( نظرية كوبمان). لقد وجد ان المعاملات الهندسية لشرائط الكرافين النانوية النقية المحسوبة في الدراسة الحالية تتفق بشكل جيد مع القيم العملية نتيجة للامثلية الهندسية التي تم الحصول عليها لتلك التراكيب، اما بالنسبة لشرائط الكرافين النانوية المطعمة فلم يتم الحصول على بيانات سابقة وعليه فان الدراسة الحالية قد زودتنا ببيانات جديدة في هذا المجال. ان الطاقة الكلية لشرائط الكرافين النانوية تتناقص بزيادة كل من عرض الشريط والاعداد الذرية للذرات في الشريط. ان النتائج التي تم التوصل اليها من خلال هذا البحث، ان فجوة الطاقة لشرائط الكرافين النانوية النقية بعدم وجود ذرات الهيدروجين في النهايات الطرفية لحلقات الفينيل تزداد بزيادة عرض الشريط. بينما تتناقص فجوة الطاقة لشرائط الكرافين النانوية النقية بوجود ذرات الهيدروجين في النهايات الطرفية لحلقات الفينيل مع زيادة عرض الشريط. بالنسبة للشريط بنفس العرض، كان فقط الشريط الاقل عرضا وبوجود ذرات هيدروجين فانه يمتلك فجوة طاقة اكبر مما هو للشريط بنفس العرض وبعدم وجود ذرات هيدروجين. ان استبدال ذرات الفلور والكلور بدلا من ذرات الهيدروجين ادى الى اختزال بسيط في فجوة الطاقة وهذا نتيجة للاتحاد الخطي للمدارات الذرية لذرات مختلفة لتشكيل المدارات الجزيئية. من جانب اخر، فان اضافة ذرات الاوكسجين بدلا من ذرات الهيدروجين لبناء شرائط اوكسيد الكرافين النانوية ادى الى تغيير طاقات المستوي الجزيئي العلوي المشغول والمستوي الجزيئي السفلي الفارغ وبالتالي فان التراكيب في مجموعتي شرائط اوكسيد الكرافين النانوية تمتلك قيم مختلفة من فجوة الطاقة وهي تعتمد على عدد وموقع ذرات الاوكسجين في كل تركيب. تعد هذه النتيجة الاساس المستقبلي للدراسة الحالية حيث ان بعض شرائط اوكسيد الكرافين النانوية تمتلك خواص عوازل وبعضها تمتلك تطبيقات اشباه موصلة. كما بينت النتائج ان طاقة التاين، الالفة الالكترونية والكهروسالبية لشرائط الكرافين النانوية النقية بوجود ذرات الهيدروجين هي اعظم منها لكل من شرائط الكرافين النانوية النقية بعدم وجود ذرات الهيدروجين في النهايات الطرفية لحلقات الفينيل في الشرائط، بينما الصلادة الكهروكيميائية تتناقص والمرونة الالكترونية تزداد باضافة ذرات الهيدروجين ماعدا الشريط الاول الاصغرفان له سلوك مغاير. ان جميع المتغيرات الالكترونية لشرائط كلور - وفلور - الكرافين النانوية كانت اقل منها لشرائط الكرافين النانوية النقية ماعدا المرونة الالكترونية فانها تزداد باضافة ذرات الفلور والكلور. علاوة على ذلك، ان انحلال مستويات الطاقة لكل تركيب يعتمد على كل من عرض الشريط، نوع وعدد وموقع الذرات في الشريط. بشكل عام، ان النتائج التي تم التوصل اليها في هذه الدراسة تشير الى بناء تراكيب جديدة لها خواص الكترونية جديدة مختلفة. لقد تم ايجاد اشكال مختلفة للجهد الكهروستاتيكي والكثافة الالكترونية الكلية طبقا لمناطق التوزيع المتماثل وغير المتماثل للشحنات في كل تركيب. كما ان النتائج قد بينت ان شرائط الكرافين النانوية النقية بعدم وجود ذرات هيدروجين تمتلك استقطابية جزيئية اعظم منها لتلك الشرائط النقية بوجود ذرات الهيدروجين. كذلك فان الاستقطابية الجزيئية تزداد بزيادة عرض الشرائط. ان اضافة ذرات الفلور، الكلور والاوكسجين بدلا من ذرات الهيدروجين قد ادى الى امتلاك التراكيب قيم مختلفة من الاستقطابية الجزيئية واعتمادا على نوع وموقع وعدد الذرات في كل تركيب. ان القيم المحسوبة لترددات اهتزازات التمدد والانحناء من اطياف الاشعة تحت الحمراء لمجموعتي شرائط الكرافين النانوية النقية قد دلت على توافق جيد مع النتائج العملية لمركبات الفينيل الحلقية. بينما لشرائط كلور - وفلور - واوكسيد الكرافين النانوية فان الدراسة الحالية قد اعطت بيانات جديدة في هذه الخاصية. | This thesis focuses on the quantum mechanical treatment of the structural, electronic and spectroscopic properties of Graphene NanoRibbons (GNRs). Density Functional Theory (DFT) was used with hybrid functional B3LYP/6 - 31G level of theory to investigate the proposed structures. These structures are divided into four groups, which are pure GNRs as a first group and second group, fluoride - and chloride - GNRs as third group, as well as oxidant - GNRs as a fourth group. The aim of this work concerne on the effect of the nanoribbons width and studying the effects of adding different atoms on the structural and electronic properties of GNR. The proposed structures were designed using nanotube Modular program and the DFT calculations have been performed using Gaussian 09 package of programs. Before the nanostructures are reorganized and studied in the laboratory, the computational calculations provide a useful tool for estimating the structural and electronic properties to offer information about these mentioned materials. The calculated structural properties included the geometrical parameters of the structures and the standard coordinates of all atoms in each structure. The electronic properties included the total energy, electronic states (HOMO and LUMO energies), energy gap, some electronic variables, electron density, electrostatic potential, density of states, molecular Polarizability and the relative IR - spectra. The electronic variables are calculated according to the so called orbital vertical theorem (Koopmans theorem).The results showed, the geometrical optimization of all pure GNRs have been found in a good agreement with experimental data due to their relaxation, and for the others doped GNRs, there is no reference data. The current study supplies new data in this field. The total energy of GNRs decreased with the increasing of the number of atoms in the nanoribbon. In addition, the results showed that, the energy gap of pure GNRs without hydrogen atoms in the terminal ends of phenyl rings increased with the increasing of the width of the nanoribbon. While the energy gap of pure GNRs with hydrogen atoms in the terminal ends of phenyl rings reduced with the increasing of the width of the nanoribbon. For the same width of the nanoribbon, only the smaller one with hydrogen atoms has larger energy gap than that without hydrogen atoms. Replacing the hydrogen atoms by fluorine and chlorine atoms in the nanoribbons leads to few reducing in the energy gap; this is due to the linear combination of atomic orbitals of different atoms to construct the molecular orbitals. On the other hand, adding the oxygen atoms instead of hydrogen atoms to construct the oxidant - GNRs changes both the HOMO and LUMO energies, and therefore, the structures in the two groups of oxidant - GNRs have various values of energy gap depending on the number and position of the oxygen atoms in each structure. This result is the main feature of current study in which some of the oxidant - GNRs have insulating properties and the others have semiconducting applications. The results showed that, IE, EA and EN of the pure GNRs with hydrogen atoms are greater than that of both pure GNRs without hydrogen atoms in the terminal ends of phenyl rings in the nanoribbons, while H is decreased and S is increased with adding hydrogen atoms except the first smaller nanoribbon, it has inverse behavior. All the electronic variables of fluorine and chloride - GNRs are smaller than that of pure GNRs except S, it was increased with adding of fluorine and chlorine atoms. Moreover, the degeneracy of energy levels of each structure depends on the width of the nanoribbon, the type, number and position of atoms in the nanoribbon. In general, the results of this study refer to that; the proposed constracted structures are of varies electronic properties. It found that, there are different shapes of electrostatic potential and total electron density according to the symmetric and asymmetric distribution areas of charges in each structure.The results showed the pure GNRs without hydrogen atoms have molecular polarizability greater than that of the pure GNRs with hydrogen atoms. So, the molecular polarizability was increased with the increasing of the width of the nanoribbons. Adding fluorine, chlorine and oxygen atoms instead of hydrogen atoms gave the structures different values of molecular polarizability depending on the type, position and number of atoms in each structure. The calculated values of frequency of stretching and bending vibrations from IR - spectra of the two groups of pure GNRs showed good agreement with experimental results of the phenyl rings compounds. While for the fluorine, chloride - GNRs and oxidant GNRs, this study supplies a new data in this aspect.

التركيب الالكتروني لبلورات الجرمانيوم النانوية باستعمال نظرية المبادئ الاساسية المحددة لهارتري - فوك == Electronic Structure of Germanium Nanocrystals Using Ab Initio Restricted Hartree - Fock Theory

Author name: نور هادي عيسـى
Supervisor name: مضر احمد عبد الستار | احمد محمود عبد اللطيف
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: تم استعمال طريقة المبادئ الاساسية المحددة لهارتري - فوك وتقريب خلية الوحدة الكبيرة لمحاكاة تاثير الحجم على بلورات الجرمانيوم النانوية ولقد تم دراسة خمسة احجام من الذرات هي8 و16 و54 و64 و128 ذرة وتحديد التركيب الالكتروني وبعض الخصائص الفيزيائية لتلك البلورات النانوية لجزئي القلب والسطح مثل فجوة الطاقة وطاقة الترابط والثابت الشبيكي وعرض حزمة التكافؤ لشكلين هندسيين المكعب ومتوازي المستطيلات. ان طاقة الترابط تزداد بزيادة حجم القلب وصولا الى القيمة 10.79 الكترون فولت وهذه القيمة تمثل ضعف القيمة العملية تقريبا. بينما فجوة الطاقة تقل مع زيادة حجم القلب وتصبح قريبة من القيمة العملية عند اضافة تاثير السطح وقد وجد ان القيمة 0.29 الكترون فولت لـ 64 ذرة والتي تشير الى نصف القيمة العملية ونتوقع الحصول على قيمة دقيقة عند دراسة عدد اكبر من ذرات السطح. ولقد اخذنا بالحسبان التاثيرات النسبية وتصحيح الطاقة بالنسبة لنقطة الصفر. كما ان ادخال تاثير السطح المؤكسد(001) ذو الابعاد (1×1) وحسب الحصر الكمي فان السطح يعمل على تقليل فجوة الطاقة وزيادة عرض حزمة التكافؤ وهذه النتيجة تتفق مع اغلب البحوث النظرية. اما حزم التكافؤ فانها تكون اكثر عرضا عند السطح نتيجة لفصل المستويات الطاقية ووجود ذرات الاوكسجين.كما ان ثابت الشبيكة بقيمة 0.54 نانومتر يتفق بصورة جيدة مع القيمة العملية. تلك الخصائص تبدو اكبر من تلك المحسوبة بطرائق شبه تجريبية والتي تستخدم الاهمال التام للتداخل التفاضلي لانها تحسب كل التكاملات. ولقد بينت النتائج ان حالات السطح تكون قليلة التحلل بسبب عدم استمرارية السطح ووجود ذرات الاوكسجين | Ab initio restricted Hartree - Fock (RHF) method coupled with the large unit cell method (LUC) is used to simulate five sizes of Ge nanocrystal (8, 16, 54, 64, and 128) atoms and determine the electronic structure and physical properties of these nanocrystals with core and surface parts such as energy gap, cohesive energy, lattice constant, and valence bandwidth for two geometrical shapes : cubic and parallelogram. Cohesive energy increased with the core size reaching the value ( 10.79 eV) which represent approximately twice the experimental value, whereas energy gap decreased as the core size becomes near from the experimental value when we add surface effect so we obtain the value (0.29 eV) for 64 atoms which equals half the experimental value and we expect that we have an accurate value when we study high number of surface atoms. We take into account relativistic and zero - point corrections. The introduce of oxygenated (001) - (1×1) surface is effected and according to quantum confinement reduced the energy gap and enlarged valence bandwidth of (20.29 eV) greater than that of bulk and in agreement with most theoretical researches. Valence bands are wider on the surface part due to the splitting of energy levels and oxygen atoms. lattice constant with 0.54 nm is in good agreement with the experimental value. These properties seem to be larger than that obtained from semiempirical methods using the complete neglect of differential overlap (CNDO) cause it computes all integrals. The results show that the surface states are found mostly few - degenerate because of the effect of surface discontinuity and oxygen atoms

دمج الصور المتعددة الحزم مع احادية الحزمة باستخدام طريقة مطورة == Fusion of Multispectral and Panchromatic Images Using Adaptive Method

Author name: خالد حسن صالح
Supervisor name: اسراء جميل محسن
General topic: Physics
Specific topic: Physics
Degree: Master
University: University of Baghdad
Language: English
University location: Baghdad
First pages:
Abstract: The many application of remote sensing and GIS required both the spatial resolution and spectral resolution be high, image fusion, or in other word image sharpening, is a useful technique. To obtain a new image from a set of input images that describes the scene better than any single input image date. In this thesis many image fusion techniques have been adopted to fuse the low spatial resolution multispectral image with high spatial resolution panchromatic image for the same scene. These techniques include traditional techniques such as Intensity - Hue - Saturation (IHS), Principal Component Transformation (PCT), Wavelet Transformer (WT) and variational technique like P+XS method.The fusion process have been implemented on three type of images represent three studied areas captured by different sensors with different spatial and spectral resolution, first studied area image for Sinbad Island in Basra province was gathered by Landsat7 ETM+ sensor with 30m resolution for multispectral bands and Quickbird with 0.6m spatial resolution for panchromatic band. Second studied area image for Green zone in Baghdad province was captured by QuickBird with (2.4m and0.6m) for multispectral and panchromatic band respectively. Kingston County in Canada was captured by landsat7 ETM+ with (30m and 15m) spatial resolution for multispectral and panchromatic bands respectively. Many Image Quality Metrics such as correlation coefficient (CC), Relative Dimensionless Global Error in Synthesis (ERGAS), Relative Average Spectral Error (RASE), Root Mean Squared Error (RMSE), special correlation (SC), and Spectral Information Divergence (SID) have been used to compute the quality of resultant fused image.

دراسة الخصائص الذرية للاغلفة الخارجية للذرات (B, C, N, O, F, Ne) == Study of the Atomic Properties of Intra Shells for (B, C, N, O, F, Ne) Atoms

Author name: كمال مهدي صاحب
Supervisor name: قاسم شمخي جبار الخفاجي
General topic: Physics
Specific topic: Atomic Physics
Degree: Master
Language: English
University location: Najaf
First pages:
Abstract: اوجدت هذه الدراسة الخواص الذرية للاغلفة الخارجية (1s, 2s, 2p) لبعض الانظمة الذرية ( البورون, الكاربون, النيتروجين, الاوكسجين, الفلور, النيون) في الحالة الارضية باستخدام طريقة التقريب هارتري فوك.ان الخصائص الذرية التي درست بهذه الرسالة هي الكثافة القطرية لجسيمين, الكثافة القطرية لجسيم واحد, القيمة المتوقعة لجسيم واحد, القيمة المتوقعه لطاقة التجاذبية, ثابت الحجب النووي والكثافة الالكترونية قرب النواة لكل الاغلفة. دالة التوزيع البينية القيمة المتوقعة لجسيمين القيمة المتوقعة للطاقة التنافرية القيمة المتوقعة لطاقة الكامنة والقيمة المتوقعة لطاقة هارتري - فوك للغلاف 1s, 2sكافة النتائج العددية تم الحصول عليها باستخدام برنامج mathcad (professional 2001i) وان كافة الخواص الذرية هي خواص عيارية تم حسابها بالوحدات الذرية | In this work we examined the atomic properties of the intra - shells (1S, 2S, 2P) for some atoms like ( Boron, Carbon, Nitrogen, Oxygen, Fluorine, Neon) in ground state using Hartree - Fock approximation.The atomic properties which are studied in this work are : - two - particle radial density function , one - particle radial density function , one - particle expectation value , the expectation value of attraction energy Nuclear Magnetic Shielding Constant and Electronic Density at Nucleus for each individual shell. inter - particle distribution function , inter - particle expectation value , the expectation value of repulsion energy , the expectation value of total potential and the expectation value of Hartree - Fock energy for 1S and 2S shells,The results were obtained numerically using Mathcad (professional 2001i), all the properties are calculated by atomic unit and normalized to unity.

تقييم التلوث الاشعاعي للمياه السطحية والتربة حول منجم اليورانيوم في محافظة النجف == Assessment of Radiation Pollution the Surface Water and Soil around Uranium Mine in Najaf

Author name: علي فرحان ناصر حسين
Supervisor name: حيدر حمزة حسين | حسين حمد الغزالي
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Najaf
First pages:
Abstract: People are exposed to ionizing radiation from the radionuclides that are present in different types of natural sources, of which water and soil are of the most important sources.Where in this study natural radioactivity in Twenty - nine water samples and Thirty - two soil samples are collected from different locations around the Uranium mine in Abu Sakhir of the province of Najaf using Gamma spectroscopy. Also in present study of Radon concentration in water samples were detected using the RAD - 7 technique.The values of activity concentration for 226Ra, 232Th, 40K in water samples have been found to lie in the range of (2.822±1.953 to 51.888±3.473Bq/L),(7.0944±0.804 to 28.450±2.194Bq/L) and (217.86±11.805 to 920.58±15.024 Bq/L ) respectively. While the Radium equivalent values vary from( 33.507±5.895 Bq/L) to (156.136±8.186 Bq/L).The soil samples has been found that the specific activity of 226Ra, 232Th and 40K ranged from (15.13 ±7.06 to 229.65 ±8.21 Bq/kg) , from (5.43±0.94 to 29.011±1.729 Bq/kg) ,and from (227.96±11.4 to 1045.599±7.878 Bq/kg) respectively.and values of Radium equivalent was in range from (57.69± 6.65 to 285.22± 10.77 Bq/kg).The values of Radon Concentrations are in range between (142 to 318.75 mBq/L).Finally, he found that all the concentration of radium in the water samples were within the range allowed a 33 Bq/L, except for w19, w28, and a was above the allowed range, but for most of the samples of soil samples was above the permitted range S3 and S29 were within the range.We have noted that thorium concentrations in water and soil samples were within the range allowed a 45 Bq/L. As is the case where the concentration of potassium found that all water samples were within the permitted range of 370 Bq / L but in the soil samples was observed that most of the high samples except samples S12 and S21

دراسة علاقة مجاميع الدم ABO مع البين ابيضاضي 18 المرتبط بالبروتين الفا والبين ابيضاضي 18 مستقبل البيتا في النساء العراقيات العربيات المصابات بالسكري من النوع الثاني == Studying the Association of ABO Blood Groups with IL - 18BPa & IL - 18R beta in the Iraqi Arab Females with Diabetes Mellitus Type 2

Author name: زينب فاضل عبد الغفور
Supervisor name: اسماء محمد صالح المهيدي
General topic: Biology
Specific topic: zoology - Genetics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: داء السكري كمرض التهابي يرتبط مع العديد من العوامل الالتهابية لذلك تهدف الدراسة الحالية لحساب تركيز العامل البين ابيضاضي 18 المرتبط بالبروتين الفا والعامل البين ابيضاضي 18 مستقبل البيتا مع عوامل الخطورة التقليدية والتي تشمل المقاييس الفيزيائية مثل متوسط محيط الخصر ومؤشر كتله الجسم وعوامل البيو كيميائية مثل الانسولين , مقاومة الانسولين , مستوى السكر في الدم في حاله الصيام ,مستوى الهيموغلوبين السكري وملف الدهون وفي الوقت نفسه دراسة ارتباطهم مع نظام الدم ABO في النساء العراقيات العربيات المصابات بالسكري من النوع الثاني ومن اجل معرفة تاثير ذلك مع عوامل اخرى التي تعتبر كمؤشر او مطور لمرض السكري من النوع الثاني . وشملت الدراسة الحالية 340 مريضا من النساء العراقيات العربيات المشخصات حديثا بالسكري من النوع الثاني 200 من النساء الاصحاء اختبرت للتكرار الاليلي والمظهري ,ومن هؤلاء 60 مريضة اختبرت للدراسة المناعية والكيميائية مقارنة مع 28 من النساء الاصحاء .الاختبارات المناعية بواسطة استخدام تقنية الانزيم المرتبط المناعي, اما المقاييس الكيميائية باستخدام الاساليب الانزيمية واللونية, وتم تقسيم المرضى والسيطرة حسب مجاميع الدم الى اربعة مجاميع ثانوية (A , B ,AB ,O) وفقا لنوع فصائل الدم التي كشف عنها بواسطة الاختبارات المصلية القياسية .اظهرت البيانات الحالية : 1 - زيادة معنوية في المصل العامل البين ابيضاضي 18 المرتبط بالبروتين الفا في المرضى الحاليين ,في حين لم تظهر اختلافات معنوية في مستوى مصل العامل البين ابيضاضي 18 مستقبل البيتا .2 - زيادة معنوية في متوسط العامل البين ابيضاضي 18 المرتبط بالبروتين الفا مع زيادة العمر في كل من المرضى ومجموعه السيطرة, في حين العامل البين ابيضاضي 18 مستقبل البيتزااد في المجموعة الاقل من 40 سنة وانخفض مع زيادة العمر في كل من المرضى ومجموعه السيطرة .بالاظافة الى زيادة كل عوامل الخطورةالاخرى.3 - تركيز كلا العاملين العامل البين ابيضاضي 18 المرتبط بالبروتين الفا والعامل البين ابيضاضي 18 مستقبل البيتا يزداد بشكل غير معنوي تدريجيا في كل المرضى مع زيادة مدة المرض ونفس النتيجة لمقاومة الانسولين.4 - اظهرت نسبة الهيموغلوبين السكري اقل من 7.3 % زيادة كبيرة في متوسط العامل البين ابيضاضي 18 المرتبط بالبروتين الفا , العامل البين ابيضاضي 18 مستقبل البيتا وتنخفض تدريجيا مع زيادة نسبة الهيموغلوبين السكري .5 - الافراد الذين كانوا يحملون فصيلة الدم B اظهروا اعلى معدل لمتوسط العامل البين ابيضاضي 18 المرتبط بالبروتين الفا , الانسولين ومقاومة الانسولين .6 - المرضى الذين كانوا يحملون فصيلة الدم B والاصحاء الذين يحملون فصيلة الدم A اظهروا اعلى معدل لمتوسط العامل البين ابيضاضي 18 مستقبل البيتا .7 - يعتبر العامل البين ابيضاضي 18 المرتبط بالبروتين الفا والعامل البين ابيضاضي 18 مستقبل البيتا كعوامل خطورة مستقلة في النساء العراقيات العربيات المصابات بالسكري من النوع الثاني والتي تدعمها غياب العلاقة المعنوية بين العامل البين ابيضاضي 18 المرتبط بالبروتين الفا والعامل البين ابيضاضي 18 مستقبل البيتا وجميع عوامل الخطورة التقليدية الاخرى .8 - هنالك علاقة ايجابية بين مستويات العامل البين ابيضاضي 18 المرتبط بالبروتين الفا وخطورة السكري من النوع الثاني والذي قد يعتبر كمؤشر لحدوث المرض , في حين ان مستويات العامل البين ابيضاضي 18 مستقبل البيتا قد يكون مؤشر لتطور المرض .مزيد من الدراسات اللازمة لفهم العلاقة بين مجاميع الدم , عوامل الالتهابية ومخاطر السكري من النوع الثاني . | DM is considered as inflammatory disease associated with many inflammatory factors. As such the present study aims to investigate the concentration of IL - 18 binding protein alpha (IL - 18BPa) and IL - 18R beta with classical risk factors which include Anthropometric risk factors like Age, Central Obesity (CO) and body mass index (BMI), biochemical factors like Insulin , Insulin Resistance (IR), Fasting Blood Glucose ( FBG), Glycosylated Hemoglobin (HbA1c) and lipid profile. Besides, the study aims to studying their association with ABO blood system in the Iraqi Arab female patients with diabetes mellitus type 2 in order to figure out their effect with other factors as predictor or developer for diabetes mellitus type 2. The present study included 340 Iraqi Arab female patients newly diagnosed with DMT2 and 200 healthy individuals tested for phenotype and allele frequency. From those, 60 patients were tested for the immunological and chemical where compared to 28 healthy individuals. Immunological tests by using ELISA kits. While Chemical parameters using enzymatic and colorimetric methods. The study groups (patients and control) were divided into four sub groups (A, B, AB and O) according to the class of blood groups which were tested by using standard serological procedures. The present data showed : 1 - A significant increase in the serum level of IL - 18BPa in the patients of the present study, while there was no significant difference in the serum level of IL - 18R beta. 2 - A significant increased in mean of IL - 18BPa with increased age in both patients and control groups. While IL - 18R beta showed increase at group less than 40 year and decreased with increasing age in both patients and control group. Besides increased all other risk factors. 3 - The levels of both IL - 18BPa and IL - 18R beta were gradually non significantly increased the level in each patients group with an increased duration of disease and the same for IR. 4 - Patients with HbA1c less than 7.3% showed a significant increase in mean of IL - 18BPa and IL - 18R beta and decreased gradually with the increase of HbA1c. 5 - Patients and control subjects who carried blood group B had the highest mean of IL - 18BPa, Insulin and Insulin resistance. 6 - Patient subjects who carried blood group B and control subjects who carried blood group A showed the highest mean of IL - 18R beta. 7 - IL - 18BPa and IL - 18R beta act as independent risk factors in Iraqi Arab females with DMT2 which supported by the absence of significant correlation among IL - 18BPa, IL - 18R Beta and all others classical risk factors. 8 - A positive relation between levels of IL - 18BPa and risk of DMT2. This may be an indication of inflammation for newly diagnostic diabetic patients, while Serum levels of IL - 18R beta might be a predictor marker of disease progression. Further studies are needed to understanding the relationship between blood groups, inflammatory markers and risk of DMT2 in healthy population.

استخدام البكتريا المختزلة للنترات المعزولة من مياة انتاج حقول النفط في البصرة في السيطرة على الانتاج الحيوي لغاز كبريتيد الهيدروجين المنتج بفعل البكتريا المختزلة للكبريت == Using of Nitrate Reducing Bacteria Isolated From Produced Water of Oil Fields in Basra in Control of Biogenic Hydrogen Sulfide Produced by Sulfate Reducing Bacteria

Author name: وجدان حسين عبد الصاحب التميمي
Supervisor name: كوثر هواز مهدي
General topic: Biology
Specific topic: Microbiology
Degree: Doctorate
Language: English
University location: Basrah
First pages:
Abstract: تضمنت الدراسة الحالية استخدام تقنية الاقصاء بالتنافس الحيوي للسيطرة على الانتاج الحيوي لغاز كبريتيد الهيدروجين H2S من قبل الجراثيم المختزلة للكبريت في مزارع الدفعة والمفاعل الحيوي, اذ ان اضافة النترات او النتريت يحفز نمو الجراثيم المختزلة للنترات التي تنافس الجراثيم المختزلة للكبريت على المصادر العضوية وتستقصيها. جمعت 40 عينة من مياه انتاج حقول نفط نهران عمر واللحيس في البصرة خلال 6 اشهر للفترة من اب 2013 الى كانون الثاني 2014, عزلت مزارع خليطه من الجراثيم المختزلة للكبريت والمختزلة للنترات من تلك العينات وحسبت اعداد الخلايا لكلا النوعين باستخدام طريقه العد الاكثر احتمالا وقد اظهرت النتائج ان اعداد الجراثيم كانت منخفضة اذ بلغت اعداد الجراثيم المختزلة للكبريت بين7 - 4 خلية/100مل في حين كانت اعداد الجراثيم المختزلة للنترات اقل من 4 - 2 خلية/ 100مل. كما تضمنت الدراسة الحالية ايضا تنقيه للجراثيم المختزلة للكبريت والمختزلة للنترات واجراء التشخيص الجيني بتقنيه التفاعل التسلسلي لانزيم البوليمريز PCR والذي من خلاله تم تضخيم الجين16S rRNA وحدد تتابعه للتشخيص الى مستوى السلالة وقد اظهرت تحاليل المجتمع الجرثومي ان عزلات الجراثيم المختزلة للنترات قد امتلكت تطابقا بنسبة 99% مع الانواع Pseudomonas stutzeri وP. putida وHerbaspirillum huttiense وBacillus licheniformis اما عزلات الجراثيم المختزلة للكبريت فقد اظهرت النتائج انها امتلكت تماثل 99% للانواعShewanella hafniensis وDesulfotomaculum acetooxidans وDesulfosporosinus orientis مع افتراض ان جميع العزلات هي سلالات جديدة عالميا. كما اظهرت نتائج المعاملة بالنترات او النتريت في مزارع الدفعة وجود تاثير مثبط قوي على الجراثيم المختزلة للكبريت اذ لم يزداد مستوى الكبريتيد في جميع التراكيز المستخدمة ( 200 و400 و600 و800 و1000) ملغم/لتر من النترات والنتريت فقد تراوح مستوى تركيز الكبريتيد بين 4.2 و21 ملغم/لتر عند المعاملة مع النترات و23 و5.2 ملغم/ لتر مع النتريت, وتطابقت هذه النتائج مع تركيز الخلايا في جميع القناني المعاملة, اذ تراوح بين 0.26 - 0.001 و0.003 - 0.17 مع النترات او النتريت على التوالي بينما كانت هناك زيادة معنوية في تركيز الكبريتيد الذي بلغ 121 ملغم/لتر وتركيز الخلايا بامتصاصية بلغت 0.84 في عينات السيطرة.كان للجراثيم المختزلة للنترات تاثير مثبط قوي على نمو الجراثيم المختزلة للكبريت وانتاج الكبريتيد عند اضافة المغذيات المشجعة لنموها بمختلف التراكيز, اذ ازدادت فعاليه الجراثيم المختزلة للنترات واستهلكت كل من النترات او النتريت المضاف خلال 3 - 2 يوم من الحضن وكان اعلى تاثير مثبط لانتاج غاز كبريتيد الهيدروجين عند التركيز 1000 ملغم/لتر من النترات اذ اظهرت النتائج وجود انخفاض معنوي في مستوى الكبريتيد الى34 ملغم/لتر في حين كانت اعداد البكتريا 34.8 خلية/مل بعد عشرة ايام من المعاملة. اظهرت نتائج معالجة الحموضة طويلة الامد باستخدام المفاعل الحيوي وجود انخفاض حاد في انتاج غاز كبريتيد الهيدروجين بنسبة 94% بعد اضافة النترات والنتريت خلال فترة 60 يوما من المعاملة ,الاضافة المستمرة للنترات والنتريت بحوالي ( 333ملغم/اليوم للنترات و133ملغم/اليوم للنتريت) ادت الى تثبيط الفعالية الحيوية للجراثيم المختزلة للكبريت وانتاج غاز كبريتيد الهيدروجين, اذ انخفض مستوى الكبريتيد من 155 الى 10 ملغم/لتر واعداد الخلايا اكبرمن 1100 الى 3.5 خلية/ مل بما يعادل 99.6% , بينما ازدادت فعالية واعداد الجراثيم المختزلة للنترات من 1100 الى اكبر من 1100 خلية/مل.اظهرت نتائج معدل تاكل عينات الحديد المطاوع في المفاعل الحيوي بعد 60 يوما ان اعلى معدل للتاكل كان 70.7 ملغم/ سم2/ سنه في المفاعل غير المعامل بالنترات والنتريت بينما انخفض معدل التاكل الى 15.8 ملغم/ سم2/ سنه بعد نفس الفترة من التعرض في المفاعل المعامل وبنسبة انخفاض بلغت 55% مقارنة مع المفاعل غير المعامل. | This study includes the used of Bio Competitive Exclusion technology (BCX) to control biogenic production of hydrogen sulfide (H2S) by Sulfate Reducing Bacteria (SRB) in batch cultures and bioreactors. The injection of nitrate (NO3) and nitrite (NO2) promotes the growth of nitrate reducing bacteria (NRB) which outcompete (SRB) on carbon sources. A total of 40 samples were collected from produced water of oil production facilities in Basra including Nahran Omer and Al - Lahis oil fields in a period time of 6 months from August 2013 to January 2014. Mix cultures of (SRB) and (NRB) were isolated from these samples, the two types of bacteria were enumerated by using most probable number method, the results show that the numbers of both bacteria were generally quite low, the viable count of (SRB) was between 4 - 7cell/100 ml whereas the (NRB) was between <2 - 4 cell/100 ml. This study also includes purification of isolates for both (SRB) and (NRB) and the genetic identification by polymerase chain reaction (PCR) technique through which the universal 16S rRNA gene of 1500 bp is amplified and sequenced for identification to the level of strains. Microbial community analysis showed that isolates of (NRB) were have identity of 99% Pseudomonas stutzeri, P. putida, Herbaspirillum huttiense and Bacillus licheniformis while isolates of (SRB) were have identity of 99% Shewanella hafniensis, Desulfosporosinus orientis and Desulfotomaculum acetooxidans with supposing that all isolates new world strains. The results of the treatment with nitrate or nitrite showed a strong inhibitory effect on (SRB) growth and (H2S) production, sulfide levels do not increase at all concentrations (200, 400, 600, 800 and 1000) mg/l of nitrate or nitrite range between 4.2 - 21 mg/l in treatment with nitrate and 5.2 - 23 mg/l in treatment with nitrite. This is consistent with the concentrations of bacteria in all treatment bottles which range between 0.001 - 0.26 and 0.003 - 0.17 in treatment with nitrate or nitrite respectively, while there is a significant increase in sulfide 121 mg/l and concentration of bacteria 0.84 in control as optical density. (NRB) has a certain inhibitory effect on the growth of (SRB) and (H2S) production when the (NRB) nutrient (nitrate or nitrite 200, 400, 600, 800 and 1000) mg/l were adding , the activity of (NRB) increases after treatment, and it consumed all nitrate or nitrite during 2 - 3 days of incubation, the strong inhibition of (H2S) production is at concentration 1000 mg/l of nitrate where the results showed that there was significant decrease in sulfide level 34 mg/l and number of bacteria, 34.8 cell/ml during 10 days of incubation.Souring control at long term treatment in bioreactors show sharp decrease in production of (H2S) to 94% after injection of nitrate and nitrite during the period of 60 days, the continuous dosing of nitrate and nitrite (333 mg/l/day nitrate and 133 mg/l/day nitrite) inhibited the metabolic activity of (SRB) and (H2S) production severely, the sulfide levels decrease from 155 to 10 mg/l and number of (SRB) from >1100 to 3.5 cell/ml the percent in number decreased was to 99.6%, at the same time activity and numbers of (NRB) increase from 1100 to >1100 cell/ml over the duration of experiment. The results of corrosion rate measurement on mild steel after 60 days showed that the highest corrosion rate was 70.7 mg/cm2/year in control reactor while the lowest corrosion rate was 15.8 mg/cm2/year in treated reactor at the same period time of exposure with percent of decreasing in weight loss to 55% comparing with control reactor.

السيطرة الاحيائية واللااحيائية على نمو الفطر Aspergillus flavus والتعبير الجيني للجينين aflDو aflR وانتاج الافلاتوكسين B1 == Biotic and Abiotic Control on Aspergillus flavus Growth, aflD and aflR Expression and Aflatoxin B1 Production

Author name: لبيد عبد الله نجم السعد
Supervisor name: عدنان عيسى البدران | سامي عبد الرضا الجميلي
General topic: Biology
Specific topic: Biotechnologies
Degree: Doctorate
Language: English
University location: Basrah
First pages:
Abstract: Fifteen isolates of Aspergillus flavus (AFL1 - AFL15) were isolated from multiple sources included soil, compost, seeds, fruits, feed and air. The isolates were identified morphologically then confirmed by molecular techniques. Only thirteen isolates were confirmed positively (AFL1 - AFL5 and AFL8 - AFL15) while two of them were not. A phylogenetic analysis was made which revealed that the isolates grouped according to their source of isolation. The aflR profile and phenotypic AFB1 production confirmed that all thirteen isolates posses the ability to produce AFB1 with significant differences (P ≤ 0.05) among them. Growth rate profile was performed under 30ºC which showed significant differences (P ≤ 0.05) among isolates. According to the above tests, A.flavus AFL14 was selected to be the experimental isolate for the rest of experiments in this study. Comparing to A.flavus NRRL3357 type strain, the impact of temperature, water activity aw and isolate factors was examined to determine the limits and optimum ecological conditions of growth of A.flavus AFL14. The results displayed that the best growth rate was (7.217 mm/day) at 0.98 aw where the lowest was (4.069 mm/day) at 0.9 aw with no growth at 0.85 aw while the impact of temperature demonstrated by outweigh of growth rate at 35ºC (6.201 mm/day) followed by 30ºC (5.272 mm/day) which exceeded 25ºC and 40ºC (4.604 and 4.051 mm/day), respectively.Bacillus subtilis (isolates : BSS1, BSS2, BSS3, BSS4 and BSW) and Pseudomonas fluorescens (isolates : PFMst and PFDL) were elected to be used as biocontrol agents. All the isolates were passed the biochemical identification tests moreover, BSS4 and BSW isolates of B.subtilis and PFMst and PFDL isolates of P.fluorescens were confirmed molecularly which used later in all biocontrol experiments in this study. The ability ofbiocontrol agents to inhibit fungal growth was investigated and the resultsshowed significant inhibition impact represented by significant outweighof B. subtilis BSS4 (99%) on the rest of B. subtilis isolates followed by P.fluorescense PFDL and PFMst (92.29 and 86.19) %, respectively, with nosignificant differences (P ≤ 0.05) among them. The extra - cellular abilityof biocontrol agents to degrade AFB1 showed a high degradation abilityIpreformed by B. subtilis BSS4, BSW isolates and P. fluorescence PFMst,PFDL isolates (100, 100, 97.805 and 97.396%), respectively. Thedegradation residues administrated to rats to determine their effect onbiosystems, the blood parameters showed a significant reduction ofWBC, HB, RBC, and P.C.V while there was a significant increase inUrea, Glutamic pyruvate transaminase (GPT) Glutamic oxaloacetictransaminase (GOT) and MCV in AF+DMSO treatment comparing tothe negative and positive control. Water activity and biocontrol factorswere examined to control aflD and aflR expression and phenotypic AFB1production. When the experiment held using Nutrient Agar medium, asignificant inhibition of aflD and aflR expression (P=0.000 and 0.003),respectively performed by BSW at 0.94 aw comparing to 0.98 aw whileno significant inhibition was observed in the rest of the treatments. Allbiocontrol agents revealed high significant reduction of aflD and aflRexpression (P≤0.001) in each water activity level separately whichconfirmed by HPLC results. The phenotypic results showed that 0.94 awexceeded 0.98 aw in AFB1 reduction (2011 and 4280 ng/gm),respectively which agreed with gene expression results. When MaizeMeal Agar used as a medium, aflD expression presented a highsignificant increase at 0.98 aw relating to the NM level of each individualtreatment (P= 0.000 - 0.03) except PFDL+AFL14 which showed nosignificant aflD expression between both levels. aflR expression revealeda high significant reduction (P= 0. 000) caused by 0.98 PFDL+AFL14and 0.98 BSW+AFL14, respectively, while no significant differenceswere observed in the rest of the treatments or control. The HPLC resultsdisplayed a high significant reduction of AFB1 at 0.98 aw (8447 ng/gm)compared to (219000 ng/gm) at NM aw. The biocontrol agents caused ahigh significant reduction for both aflD and aflR expression (P=0. 000 - 0.043) under each individual water activity level while, HPLC resultsshowed non significant low reduction to the AFB1 performed by BSS4and BSW (25160 and 44790 ng/gm), respectively, followed by asignificant increase in AFB1 amount caused by PFMst and PFDL(267600 and 184100 ng/gm), respectively

واقع التلوث بالمركبات الهيدروكابونية في المياة والرواسب وبعض الاحياء المائية في مهر الكحلاء محافظة ميسان / العراق == The Status of Hydrocarbon Compounds Pollution of Water, Sediments and Some Aquatic Biota in Al - Kahlaa River - Missan Province /Iraq

Author name: صالح حسن جازع
Supervisor name: عبد الحسن يوسف العضب | حامج طالب السعد
General topic: Biology
Degree: Doctorate
Language: English
University location: Basrah
First pages:
Abstract: The present study was performed to have knowledge of hydrocarbon compounds pollution status in the water (dissolved and particulate fractions),sediments ,two species of aquatic plants (Ceratophyllum demersum and Paspalum pespaioides) ,two species of fishes(Liza abu and Carassius auratus) and one species of molluscs (Pseudodantopsis euphraticus) .The samples were collected monthly for the period November 2012 to October 2013 from four different stations ) Al - Magideh, Treatment unit, Al - Husaichi and Al - Zubair) distributed along Al - Kahlaa River in Missan province , in addition to Reference station lies on the Tigris River before entering Amara district about 25 Km .The sampling's months were divided into four typical seasons although this is incompatible with Iraq climate.As well as measures of some ecological parameters (water and air temperatures ,pH ,turbidity, electrical conductivity ,dissolved oxygen , biological oxygen demand BOD5 and total suspended solid) which ranged between 22 and 42 C˚ , 18 and 31 C˚ , 6.9 and 7.82 , 42 and 172 NTU , 12 and 118 μS/cm , 4.66 and 9.25 mg/l , 1.46 and 5.04mg/l ,33 and 108 mg/l respectively .In addition to that the Organic Matter(OM) and the texture were measured in the sediment samples. OM values ranged between 0.078 and 0.927% , whereas the percentage of the texture was ( 15 %clay, 71% silt and 14% sand),(31 %clay, 63% silt and 6% sand), (33 %clay, 57% silt and 10% sand) , (40 %clay, 47% silt and 13% sand) and (18 %clay, 55% silt and 27% sand) in Al - Magideh, Treatment unit , Al - Husaichi , Al - Zubair and Reference stations respectively .The concentrations of total petroleum hydrocarbons (TPHs)were measured by using spectrofluorometer. Concentrations of total petroleum hydrocarbons in dissolved fraction ranged between 1.36 μg/l in Reference station and 13.87 μg/l in Treatment unit station during summer and winter respectively ,and in particulate fraction between 2.69 μg/g dry weight in Reference station and 29.92 μg/g dry weight in Treatment unit station during summer and winter respectively ,while in sediments they ranged between 3.16μg/g dry weight in Reference station and 135.18 μg/g dry weight in Treatment unit station during summer and winter respectively. Concentrations of total petroleum hydrocarbons in C. demersum ranged between 5 μg/g dry weight during winter and 58.97 μg/g dry weight during summer , while in P. pespaioides between 3.18 μg/g dry weight during winter and 43.44 μg/g dry weight during summer. Concentrations of total petroleum hydrocarbons in L. abu ranged between 4.81 μg/g dry weight during spring and 37.3 μg/g dry weight during summer ,while in C. auratus between 2.51 μg/g dry weight during spring and 29.303 μg/g dry weight during autumn . Concentrations ofbtotal petroleum hydrocarbons in P. euphraticus ranged between 5.98 μg/g dry weight during spring and 119.75 μg/g dry weight during summer .The concentrations of Polycyclic Aromatic Hydrocarbons(PAHs) and n - alkanes were determined in the laboratories of Nihran Omer (South Oil Company in Basrah province ) ,using Gas Chromatography.Total concentrations of n - alkanes in dissolved fraction ranged between 0.027μg/l in Reference station and 0.192 μg/l in Al - Husiachi station during winter and between 0.016 μg/l in Reference station and 0.039 μg/l in Treatment unit during summer ,and for particulate fraction between 0.108 μg/g dry weight in Reference station and 2.096 μg/g dry weight in Treatment unit station during winter and between 0.101 μg/g dry weight in Reference station and 0.160 μg/g dry weight in Treatment unit station during summer ,while in sediments they ranged between 4.491 μg/g dry weight in Reference station and 51.32 μg/g dry weight Treatment unit station during winter and between 2.31 μg/g dry weight in Reference station and 19.31 μg/g dry weight in Treatment unit station during summer.The range of carbon chain length of n - alkanes in dissolved fraction ranged from C8 to C34 and in particulate fraction from C15 to C34 distributed in two patterns ,the first pattern included compounds between C8 and C25 with the abundance of C19,C21,C23 and C25 odd carbon number of and C18,C20,C22 and C24 for even carbon number ,while the second pattern included compounds with the range from C26 to C35 predominated by C27 and C29 odd carbon number and C26,C28 and C30 even carbon number.In sediments they ranged from C14 to C35 and distributed in two patterns, the first pattern included compounds between C8 and C25 with the abundance of C17,C19 and C21 odd carbon number and C18,C20 and C22 for even carbon number ,while the second pattern included compounds with the range from C24 to C35 with predominance of C31and C33 odd carbon number and from C24 to C34 even carbon number.Total concentrations of n - alkanes in C. demersum ranged between 6.467 μg/g dry weight during spring and 59.483 μg/g dry weight during summer ,whereas in P. pespaioides between 34.7 μg/g dry weight during winter and 166.6 μg/g dry weight during summer .The distribution of n - alkanes compounds in plants chain length ranged from C15 to C35 with bimodal from C15 to C27and from C28 to C35 with predominance of C17 to C25 odd carbon number and C18 to C24 even carbon number in the first one ,whereas in the second the dominance compounds were from C29 toC33 for odd carbon number and from C26 to C32 even carbon number.cTotal concentrations of n - alkanes in muscles of L. abu ranged between 14.60 μg/g dry weight during winter and 73.15 μg/g dry weight during summer and C. auratus between 34.76 μg/g dry weight during winter and 166.61 μg/g dry weight during summer . The distribution of n - alkanes compounds in fish muscles chain length ranged from C16 to C35 with bimodal from C16 to C25 and C26 to C35 with predominance of C17 to C25 and C18 to C24 for the first one ,and from C27 to C33 and from C26 to C34 for the second. These reflected nutrition nature for these kinds of fishes which depend on algae ,phytoplankton ,zooplankton ,diatoms ,insects and crustacean . While in the mollusc (P. euphraticus) ranged between 95.16μg/g dry weight during spring and 220.36 μg/g dry weight during summer. The distribution of n - alkanes compounds in P. euphraticus chain length ranged from C14 to C35 with bimodal from C14 to C27 and from C28 to C35 with predominance of C17 to C21 and from C18 to C24 for the first one ,and from C29 to C33 and from C30 to C34 for the second.The values of Carbon Preference Index (CPI) and pristane to phytane ratio was calculated to know the hydrocarbon compounds source in water ,sediments and biota of Al - Kahlaa River ,since the CPI value ranged between 0.142 and 1.314 in dissolved fraction and between 0.045 and 2.193 in particulate fraction , 0.160 and 1.872 in sediments,1.075 and 8.638 in plants , 0.285 and 1.537 in fishes and between 0.354 and 4.457 in mollusc .Whereas the values of pristane to phytane ranged between not detected and 1.579 in dissolved fraction , not detected and 0.601 in particulate fraction , 0.447 and 3.008 in sediments, not detected and 0.821 in plants , not detected and 2.176 in fishes and between 0.822 and 1.347 in mollusc .These indicate that there are two sources of hydrocarbon compound in water ,sediments and biota ,biogenic from living organisms and anthropogenic from domestic ,industrial and petroleum pollutants except in plants .Total concentrations of PAHs in dissolved fraction varied from 0.739 ng/l in Reference station to1.974 ng/l in Treatment unit during winter ,and from 0.300 ng/l in Reference station to1.125 ng/l in Treatment unit during summer ,and in the particulate fraction they varied from 0.79 ng/g dry weight in Reference station to 24.42 ng/g dry weight in Treatment unit during winter ,and from 4.369 ng/g dry weight in Reference station to10.545 ng/g dry weight in Al - Husaich during summer ,while in sediments they varied from 4.906 ng/g dry weight in Reference station to 35.479 ng/g dry weight in Treatment unit during winter ,and from 2.391 ng/g dry weight in Reference station to 25.886 ng/g dry weight in Treatment unit during summer.It had been noticed that there were a predominance of high molecular weight PAHs on low molecular weight PAHs ,while Benzo(a)dAnthracene/(Benzo(a)Anthracene+ Chrysene) BaA/(BaA+Chr) ratio ranged from 0.218 to 0.804 in water and 0.520 to 0.66 in sediments. The Indeno (1,2,3 - cd)pyrene /(Indeno (1,2,3 - cd)pyrene + Benzo(ghi)perylene) InP/(InP+BghiP) ratio ranged between not detected and 0.578 in water and between not detected and 0.681 in sediments .The Fluoranthene/ Pyrene (Fl/Py)ratio ranged between 0.150 and 2.47 in water and between 0.10 and 8.490 in sediments ,this give an indication of the source of PAHs compounds in water and sediments which were mainly pyrogenic and few from them petrogenic .Total concentrations of PAHs in C. demersum ranged between 24.124 ng/g dry weight during winter and 87.289 ng/g dry weight during summer ,whereas in P. pespaioides between 1.616 ng/g dry weight durig winter and 16.661 ng/g dry weight during summer .The Lower Polycyclic Aromatic Hydrocarbons to Higher Polycyclic Aromatic Hydrocarbons ratio ranged between 0.006 and 0.009 in C. demersum and between 0.008 and 0.103 in P. pespaioides. TheBaA/(BaA+Chr)ratio ranged from 0.995 to 0.997 in C. demersum and 0.756 to 0.995 in P. pespaioides. The InP/(InP+BghiP) ratio ranged between 0.342 and 0.807 in C. demersum and between 0.19 and 0.645 in P. paspaloides . The Fl/Py ratio ranged between 0.096 and 0.988 in C. demersum and between 0.018 and 5.018 in P. pespaioides. These indicate that the sources of PAHs in these plants were both pyrogenic and petrogenic .Total concentrations of PAHs in muscles of L. abu ranged between 2.301 and 16.661 ng/g dry weight during winter and summer respectively and in C. auratus between 1.095 and 8.675 ng/g dry weight during winter and summer respectively ,whereas in mollusc (P. euphraticus) ranged between 1.86 and 6.88 ng/g dry weight during spring and summer respectively. According to ratios of Low Polycyclic Aromatic Hydrocarbons(LPAHs) to High Polycyclic Aromatic Hydrocarbons (HPAHs), BaA/(BaA+Chr), InP/(InP+BghiP) and Fl/Py ,they certainly reflected that the PAHs sources in fishes and mollusk are pyrogenic as a main sources and petrogenic as a small part .Also results of this study revealed the presence of seasonal and spatial variations in concentrations of TPHs ,n - alkanes and PAHs in water ,sediments and aquatic biota from Al - Kahlaa River ,the highest concentrations were recorded during winter whereas the lowest during summer ,also the highest values of these compounds were recorded in Treatment unit station in comparison with other stations.

تجميع وتشخيص واستخدام الهائمات الحيوانية الدقيقة من نهر الحلة في تغذية يرقات اسماك الكارب الشائع (L., 1758) Cyprinus carpio

Author name: ازهار عبد الحميد عبد الحسن
Supervisor name: مؤيد جاسم ياس العماري | عدي جاسم عبد الرزاق
General topic: Biology
Specific topic: Environment
Degree: Master
Language: English
University location: Babylon
First pages:
Abstract: The present study was carried out in AL - Hilla River near Al mahaweel district in the middle of Iraq during autumn 2016 to summer 2017. The study included a collection of high density from microzooplankton by use special device then identified and used it as live food for early feeding common carp larva (Cyprinus carpio). The environmental factors of Hilla river tested for four seasons and ranged between 6 - 44 ˚C of air temperature, 9.5 - 30 ˚C of water temperature, 7.03 - 8.58 of pH, 921 - 1090 µm/cm of conductivity, 654.33 - 772.00 mg/l of total dissolved solids and 550.00 - 636.33 of salinity, 5.43 - 13.03 mg/l of total suspended solids, 7.5 - 10.31 mg/L of dissolved oxygen, 1.96 - 6.30 mg/l of BOD5, 1.61 - 2.49 m/s of water velocity, 5.17 - 16.80 µg/L of chloropyll - a - . The taxonomic and ecological study is done to the microzooplankton specially rotifer. There are few studies of rotifer in Hilla river, The result showed that the density of rotifera was ranged between 23ind. /L in the summer season to 65.66 ind. /L in winter season, included 65 rotifer taxa (62 species +2genera +1 class) were recorded in this study, 10 taxa (9 species + 1 genus) were recorded for the first time in Iraq and 14 taxa (13 species + 1 genus) were recorded for first time in Hilla River compared with available local studies. Keratella tropica showed the highest density of the rotifera, Lecane genus showed the highest species number (10 species). Canonical correspondence analysis showed Physico - chemical parameters of water affected on the density of rotifer both positively and negatively. There was positive significant correlation between density rotifer with electrical conductivity, total dissolved solids, and salinity, while pH showed the lowest effect on the density of rotifer than other environmental factors. Different species of rotifer showed some variations of the correlation with environmental factor, such as the density of Bdelloidea class correlated positive significant correlation with water temperature, while Keratella cochlearis species negative significant correlation with water temperature. Special system (multi - filtration system) designed and made by researchers in our study for collection high density of microzooplankton with size sample range between 50 - less 200 µm, with short time, less effort and low cost. The multi - filtration system that consists of three stages : pumping stage, multi - filtration stage and sample collection stage. The density of the samples was measured seasonally by comparing the density of the microzooplankton in Hilla river and the density of the microzooplankton sample obtained by the multi - filtration system. The highest density of multi - filtration system rotifer was 1023033 ind./L and the highest density of multi - filtration system total microzooplankton was 1052000 ind/L and measured chlorophyll - a - of sample multi - filtration system that ranged between 23.54 - 1931.09 µg/L. The density of rotifer and total microzooplankton that collect by the multi - filtration system were concentration up to 20222.22, 17558.81 times than what is in the river. After collection of the high density of microzooplankton by using the multi - filtration system, this microzooplankton was used as live food for early feeding fish larvae. A special experiment was designed to feed common carp of fish larvae (Cyprinus carpio) using three types of food : first live diet collected by the multi - filtration system that microplankton most rotifer, second soybean meal and third mixed food (rotifer and soybean meal). Some growth indicators for fish larvae were studied; the results showed that the highest growth rate and best survival rate were larvae fed on live food, highest increased weight and increased length, relative growth rate, specific growth rate and lowest survival rate (33.53 mg, 3.33mm, 87.78, 30.11, and32.38 % respectively) for larvae fish feeding on rotifera, while lowest increased weight and increased length, relative growth rate, specific growth rate and lowest survival rate (27.00mg, 1.43mm, 85.23, 27.39, and 61.90 % respectively) for fish larvae feeding on soybean meal.
1 ... 323 324 325 326 327 ... 496