Show: 25 50 75 100 Results

Search results: 25 out of 393

دراسة الخصائص التركيبية والكهربائية لمركبات الباريوم تيتانيت المطعمة بالكالسيوم والسترونتيوم النانوية المحضرة بطريقة السول - جل ذات الاحتراق التلقائي == Studying Structural, and Electrical Properties for Nano Barium Titanate doped with (Ca,Sr) prepared by Sol - Gel Auto Combustion Method

Author name: فراس محمد طعمة عباس الجبوري
Supervisor name: فاروق ابراهيم حسين قادر
General topic: Physics
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: حضرت مركبات الباريوم تيتانيت النانوية (Ba1 - xSrxTiO3) لقيم (x=0,0.26,0.28,0.30,0.32,0.34) Ba1 - xCaxTiO3،للقيم (x=0.2,0.4,0.6,0.8)باستعمال طريقتين مختلفتين, الطريقة الاولى جديدة تستعمل لاول مرة وهي طريقة السول - جل ذات الاحتراق التلقائي، والثانية طريقة السول - جل ،ثم اجريت عليها الفحوصات والدراسات التركيبية والكهربائية. اظهرت نتائج الخواص التركيبية تشكيل الطور الرباعي ووجوده في جميع العينات المحضرة بالطريقتين، على الرغم من استبدال ايون (Ba+2),بالايون (Sr+2), والايون (Ca+2),في كلا المركبين, كذلك بينت نتائج عملية الفهرسة البرمجية باستعمال برنامج (FULL PROF)، جودة عملية التصفية(GOF),اذ كانت قيمها اكبر من الرقم(1)،لجميع العينات كما تبين نقصان كل من معلمات الشبيكة وحجم خلية الوحدة والكثافة النظرية والحجم الحبيبي للعينات بزيادة تركيز الايون (Sr+2)،والايون(Ca+2)، في كلا المركبين المحضرين مع بقاء نسبة الرباعية (c⁄a) بقيت اكبر من الرقم(1) في كل العينات. وعند دراسة خواص العزل الكهربائي سببت زيادة تركيز ايون (Sr+2)، وايون (Ca+)،زيادة ثابت العزل الكهربائي ونقصان كل من معامل الفقد العزلي والتوصيلية الكهربائية المتناوبة بثبوت العوامل الاخرى مثل درجة الحرارة والتردد وسمك العينات وتغيرها الواضح مع التردد(50Hz - 1MHz) كذلك سببت زيادة تركيز ايون (Sr+2)، وايون (Ca+)،نقصان التوصيلية الكهربائية المستمرة وزيادة متانة العزل الكهربائي للعينات المحروقة بدرجة (1100ᴼC) لمدة (4h) والمحضرة بطريقة السول - جل ذات الاحتراق التلقائي.بينت نتائج الفحوصات الكهربائية وفحص متانة العزل الكهربائي ان النسبة (X=0.30)، ذي الصيغة الكيميائية (Ba1 - xSrxTiO3)،والنسبة (X=0.6)، ذي الصيغة الكيميائية(Ba1 - xCaxTiO3)، تمتلكان اكبر ثابت عزل كهربائي واكبر متانة عزل كهربائي ،واقل معامل فقد عزلي ،واقل توصيلية كهربائية متناوبة ومستمرة ،عليه فانهما افضل نسبتين تم تحضريهما لاول مرة | In this research, Nano Barium titanate ,(Ba1 - xSrxTiO3) of values ,(x=0,0.26,0.28,0.30,0.32,0.34),and (Ba1 - xCaxTiO3)values(x=0.2,0.4,0.6,0.8) were synthesized using two different methods ,the first was a new method used for the first time, in synthesized aforementioned titanate compounds, which sol - gel auto - combustion method, and the second was sol - gel method , then the structural and electrical properties were studied. The Structural results showed presence and forming the Tetragonal Phase in all samples,though,the Substitution(Ba+2) ion with (Sr+2)and(Ca+2)ions, the results of the software indexing by (FULL PROF),program showed goodness of fitting(GOF) greater than(1),also the results showed that lattice parameters, Volume, theoretical Density and grain size decreased when the concentration of(Sr+2)and(Ca+2)ions increased in both compounds and the Tetragonality ratio (c/a) remained greater than the number (1) in all samples. When examining the dielectric properties increasing of (Sr+2) and(Ca+2) ions concentration caused increased in Dielectric Constant and decreased Dielectric loss factor, alternating electrical conductivity certified the other factors such as temperature, frequency and the thickness of the samples and change clearly with frequency (50 Hz - 1MHz),also increasing of (Sr+2) and(Ca+2) ions concentration caused decreased in direct electric conductivity and increased Dielectric Strength for the samples that fired at (1100ᴼC) for (4h) and prepared by Sol - gel auto - combustion method . The results of electrical tests and examination of the Dielectric Strength showed that ratio (X =0.30), with the chemical formula (Ba1 - xSrxTiO3), and the ratio (X= 0.6), a chemical formula (Ba1 - xCaxTiO3), possess the largest Dielectric Constant and greater Dielectric Strength, and lower Dielectric loss factor, and less alternating electrical conductivity and direct electric conductivity, so they were the best two ratios, prepared for the first time by sol - gel auto - combustion method that can be used in many applications

دراسة الخصائص التركيبية والكهربائية والمغناطيسية للفرايت النانوي ذي التركيب المغزلي المحضر بطريقة السول (NixCu0.2Zn0.8 - xFe2O4) - جل ذات الا حتراق التلقائي == Studying Structural , Electrical and Magnetic Properties for Nano Spinel Ferrite of (NixCu0.2Zn0.8 - xFe2O4) Prepared by Sol - Gel Auto Combustion Method

Author name: عمار عيسى عباس نجم الربيعي
Supervisor name: احمد رفيق عبد المجيد
General topic: Physics
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: In this research , Nano spinel ferrite (NixCu0.2Zn0.8 - xFe2O4) was synthesized using sol - gel auto - combustion and flash combustion methods .Nineteen samples were prepared and their studies were divided into three parts. Study the effect of citric acid in preparation of Nano ferrite (Ni0.1Cu0.2Zn0.7Fe2O4) by changing the molar ratio of adding fuel to any sample and the five samples were prepared from (C series). The structural properties of samples were studied using x - ray diffraction technique (XRD) and scanning electron microscope (SEM) which showed that the obtained ferrite possesses spinel cubic phase for all used molar ratios , besides when the concentration of adding fuel was increased leads to decrease in grain size and theoretical density , increase in dislocation density and the surface area. Then the molar ratio (1 : 1 M) was chosen as the best adding ratio due to that the obtained ferrite at this ratio possesses best texture coefficient with small grain size and best internal strain by comparing with the other ratios.  Study the influence of substitute (Zn+2) ion by (Ni+2) ion on the structural , electrical and magnetic properties of Nano ferrite powder (NixCu0.2Zn0.8 - xFe2O4)(0.1≤X≤0.7) synthesized using sol - gel auto - combustion method , there are seven samples were prepared (A) series and tested by two types of structural test included analyzer x - ray diffraction and scanning electron microscope, the results exhibited forming the spinel phase for all samples in spite of the substitute of (Zn+2) ion by (Ni+2) ion, and the increase of (Zn+2) ions concentration leads to decrease in the grain size and increase in theoretical density. Then the ferrite powder was divided in two groups, the first was pressed into the pellet shape which was used in electrical tests and the second group was pressed into the rings shape which was used in magnetic tests. The two faces of the pellets in first group polished by silver paste material in case to obtain a ceramic capacitors that subjected to electrical tests which included the measurement of dielectric constant , dielectric loss coefficient, alternating electrical conductivity and direct electrical conductivity ,and the study of magnetic properties for the rings samples included measurement of hysteresis loop , selfinduction, initial permeability and the relative loss factor. The results of electrical tests exhibited decrease in dielectric constant with frequency increase at room temperature , and dielectric constant increases at certain ratios of adding (Zn+2) ions and decreases at other ratios. However , the dielectric loss coefficient its fall when increasing frequency until reaches its lowest value at the high frequencies values and so it is various when the concentrations of (Zn+2) ion were changed .and the measurement of alternating electrical conductivity displaying it increases with the increasein frequency and it values disparity with the change of (Zn+2)ion concentration , in other hand the direct electrical conductivity increase with substituting (Zn+2) ion concentration increases. The magnetic tests results exhibited that the ratio (X=0.3) with chemical formula (Ni0.3Cu0.2Zn0.5Fe2O4) possesses a significant magnetic properties when compared with other samples because it has the highest initial permeability with lowest relative loss factor and it has best hysteresis loop so that it realized conditions for using it as a cores in transducers and electrical motors. Study the influence of substituting (Zn+2)ion by (Ni+2) ion on the structural properties of Nano ferrite (NixCu0.2Zn0.8 - xFe2O4)(0.1≤ X≤ 0.7) synthesized using flash combustion method, there are seven samples were prepared (F) series tested by two types of structural tests included xray diffraction and scanning electron microscope tests , and the results exhibited form the spinel phase for all samples and no other phases were presented and observed that structural results were agreed with these obtained from sol - gel auto - combustion method.

تاثير جسيمات الفضة النانوية على الخواص البصرية لزجاج التليريوم المشوب بايونات العنصر الارضي النادر السماريوم == effect of silver nanoparticles on the optical properties of glass Tellurium doping ions rare earth element Samarium

Author name: عماد محمد احمد عبد الله المرسومي
Supervisor name: طارق عبد الرضا علوان الظاهر
General topic: Physics
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: The preparation of co - doping Tellurium glass of TeO2−B2O3−PbO by silver nanoparticles and Samarium were performed according 80TeO2−(7.5−x)B2O3−12PbO−0.5Sm+3−(x)Ag. where (x=0,0.05,0.1,0.15,0.2,0.25 mol%) by melting quench technique and annealed at 300°C for 3h as a first stage of this study.The prepared samples of glass ceramic with dimensions 1mmx1cmx2cm were characterized by XRD, SEM and TEM for their structural identification. UV - spectrophotometer in the wavelength (200 - 1100 nm ) Shimadzu and K - Mac SA miniature UV - VIS spectrometer - spectra were used for their absorption and fluorescence spectra.Patterns of XRD revealed amorphous structure for all sample. The element compositions were identified by TEM and EDX attached to SEM. Their densities 5.37 - 5.49 g/cm3 were measured by Archimedes experiment, and the corresponding molar volume were calculated in the range 29.7 - 29.1 cm−3.Their variation occur due to the molarity increase of doping.The absorption spectra revealed seven peaks which represented the transition from the ground state 6H5/2 to different excited states. The band gap for direct transition for all samples about 2.3 eV, while for indirect transition around 1.91eV.The highly doped sample named A5 is selected for fluorescence spectroscopy .It spectra showed five emission bands at 430(4G9/2➙4H5/2), 435(4G9/2➙4H7/2), 450(4G9/2➙4H7/2) , 600 (4I13/2➙4H9/ٕ)and 645(4 G 5/ٕ➙6H15/2) transitions. Then according to the resulted fluorescence spectra of it, two additional samples B1 and B2 were prepared with the same molar percentage as A5,but annealed at the same temperature for 6h and 9h. And two more sampleswere prepared by increases their molarity to 1% and 1.5% for both samarium and silver, symbolized by C1 and C2 respectively. The intensities of their fluorescence spectra increases many times for the same emission bands as it is compared with the same emission bands of A5.

تصنيع ودراسة خصائص كاشف المفرق الهجين CdO/Porous Silicon

Author name: عبد الله محمود علي الجبوري
Supervisor name: نادر فاضل حبوبي | رائد عبد الوهاب اسماعيل
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: في هذا البحث، تم ترسيب اغشيةCdO على السليكون المسامي وعلى شرائح زجاجية بطريقة الاكسدة الحرارية السريعة(Rapid Thermal Oxidation) وذلك لدراسة الخصائص التركيبية والكهربائية والبصرية لهذه الاغشية. تم تصنيع كاشف المفرق الهجين نوع CdO/Porous Silicon من خلال الاكسدة الحرارية السريعة لمادة الكادميوم المرسبة على السليكون المسامي ,تم دراسة الخصائص الكهربائية والتركيبية والفولطائية الضوئية لهذه الكواشف من خللال قياسات تيار - جهد وسعة - جهد. تم استخدام التنميش الكهروكيمياوي للسليكون حيث تمت السيطرة على المسامية بتغيير كثافة تيار التنميش وزمن التنميش. لقد اوضحت النتائج ان معلمات الكاشف تعتمد بشكل كبيركثافة تيار التنميش وزمن التنميش. ان اقل قيمة لعامل المثالية التي تم الحصول عليه كانت 1.28 وذلك للكواشف المصنعة بكثافة تيار40 ملي امبير/سم2 وزمن تنميش 600 ثانية .لقد اوضحت نتائج الكفاءة الكمية اي الكواشف المصنعة تمتلك قمتين الاولى تمتص عند المنطقة المحصورة بين اوكسبد الكادميوم والسليكون المسامي اما المنطقة الثانية ناتجة بسبب الامتصاص عندالسليكون البلوري والسليكون المسامي. قيمة الكفاءة الكمية عند المنطقة الاولى كانت بحدود 77% عند الطول الموجي 550 نانومتر بينما الثانية كانت بحدود 88% عند الطول الموجي 700نانومتر. اعلى قيمة للكشفية النوعية كانت بحدود 87 عند الطول الموجي 550 نانومتر للكواشف المصنعة بكثافة تيار 30 ملي امبير/سم2 وزمن تنميش 2400 ثانية. كل الكواشف المصنعة تعمل للمدى الطيفي ( 400 - 900 ) نانومتر. اعلى قيمة لتياردائرة القصر كانت 19 مايكروامبير واعلى قيمة لفولتية الدائرة المفتوحة 420 ملي فولت للكواشف المصنعة. | In this work, CdO thin films are deposited on porous silicon and clean glass substrates by rapid thermal oxidation (RTO) to study structural, electrical and optical properties of these films. CdO/porous Si heterojunction photodetectors have been fabricated by rapid thermal oxidation (RTO) of Cd on porous and are presented. Structural, electrical, and photovoltaic properties of CdO/P - Si heterojunctions prepared by (RTO) on single - crystal p - type and monocrystalline silicon (111) substrates are examined with J - V the C - V methods. The electrochemical etching process was adopted as a technique to control the porosity of silicon wafer by controlling the time of etching in the range (600 - 2400s), and by controlling the etching current density. The results revealed that all our detectors’ parameters are highly dependant on etching time and etching current density. The minimum value of ideality factor is 1.28 for the detectors prepared with etching current density of 40mA/cm2 for 600s. The results of quantum efficiency show that these detectors have two depletion regions, the first one between CdO film and porous silicon layer, the second between the latter and the crystalline silicon. The first peak of quantum efficiency curve is 77% at a wavelength of 550nm while the second one is 88% at 700nm. The maximum specific detectivity was of wavelength 550nm for the detectors fabricated with etching current density of 40mA/cm2 and etching time of 2400s. All detectors are working on the spectrum region 400 - 900nm. The maximum Isc and Voc are 19A, 420mV respectively for the detectors fabricated with etching current density 30mA/cm2 and etching time 1200s

تصنيع دروع واقية من الاشعاع ودراسة بعض خواصها == Manufacture radiation protection shields and study some of its properties

Author name: عبد الرحيم ضياء ابراهيم
Supervisor name: احمد فاضل مخيبر
General topic: Physics
Specific topic: Physics
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: تم في هذه الدراسة تصنيع دروع واقية من مواد متراكبة مكونة من الايبوكسي كمادة اساس ومواد تدعيم مختلفة (C, Ni, PbO, Bi) وبنسب تدعيم متباينة % (10, 20, 30, 40, 50) وبابعاد cm (1 X 10 X 10) للوقاية من الاشعاع , ولغرض التعرف على مدى ملائمة هذه الدروع للاستعمال في مجال الوقاية من اشعة كاما, قيست بعض معلمات التدريع مثل معامل التوهين الخطي (μ), والعدد الذري المؤثر (Zeffe), وسمك النصف (X_(1/2)), ومعدل المسار الحر (λ_mean), والثقالة للطاقات KeV (121.8, 344.3, 662, 1773 ,1332, 1408) , بالاضافة الى عامل التراكم عند الطاقة 662 KeV , ولهذا الغرض تم استعمال منظومة كاشف ايوديد الصوديوم NaI (TI) مع مصادر مختلفة Eu - 152, Co - 60, Cs - 137. اظهرت النتائج ان هذه المعلمات تتاثر بتغير نسب التدعيم وطاقة اشعة كاما , حيث تبين ان زيادة نسبة التدعيم للدروع ادى الى زيادة كل من معامل التوهين الخطي والعدد الذري المؤثر. وفي المقابل يحدث نقصان قيم كل منهما خلال زيادة طاقة اشعة كاما للمصدر المستعمل . وبخاصة عند التراكيز العالية % (40, 50), والطاقات الواطئة< 0.662 MeV E_γ حيث سجلت قيم معامل التوهين الخطي cm - 1 (2.1726, 3.6161) للدروع المدعمة بالبزموث بنسبة تدعيم %40 و50% على التوالي ولطاقة 121.8 KeV, ولطاقة 344.3 KeV ولنفس التركيزين ايضا cm - 1 (0.36521, 0.4005) على التوالي, اما عامل التراكم فقد وجد انه يقل بزيادة التركيز عند طاقة معينة. اما بالنسبة لسمك النصف ومعدل المسار الحر فقد وجد ان سمك النصف يقل بزيادة التراكيز وبخاصة عند التراكيز العالية وكذلك الحال بالنسبة لمعدل المسار الحر. كذلك تم قياس قيم الثقالة للدروع كافة بالنسبة لعنصر الرصاص, حيث وجد من خلال قيم الثقالة ان هذه الدروع اخف وزنا من مادة الرصاص, مما يجعلها مفضلة على المواد التقليدية مثل الرصاص والكونكريت. واما بالنسبة لكفاءة الكاشف فقد وجد انها تعتمد في قيمها على مادة الدرع ونوعه وكذلك على قيمة الطاقة المستخدمة. وبينت الدراسة ان هناك توافقا جيدا بين القيم العملية والنظرية. | In this study, protection shields has been preparated , consist of composite materials have epoxy as a basis material and different reinforcing materials (C, Ni, PbO, Bi), with different reinforcing ratios (10, 20, 30. 40, 50) %, and dimensions (1 X 10 X 10) cm to protect from radiation, for examination the suitability of using this shields to protect from gamma ray, some shielding parameters was calculated like Linear attenuation coefficient (μ), Effective atomic number (Zeffe), Half layer thickness (X_(1/2)), Mean free path (λ_mean), and Heaviness for energies (121.8, 344.3, 662, 1773 ,1332, 1408) KeV , in addition to build up factor at 662 KeV, for this purpose sodium iodide system NaI(TI) was used with deferent radiation sources Eu - 152, Co - 60, Cs - 137.The results show that this parameter effected by the reinforcing ratio and gamma ray energy, it was found the linear attenuation coefficient and atomic effective number increases with reinforcing ratio increases, and decreased with energy increasing. Specially with high concentrations (40, 50) % and at low energies E_γ < 0.662 MeV, Since the values of linear attenuation coefficient for shields which reinforcing by bismuth with concentrations (40%,50) was (2.1726, 3.661) respectively for 121.8 KeV, and for energy 344.3 KeV for same concentrations is (0.36521, 0.4005) respectively. The build up factor was found decreased with reinforcing ratio increases, with certain energy.As for the Half layer thickness and mean free path, it was found that the Half layer thickness decreased with energy increasing specially at high concentrations, as well as the Mean free path.Heaviness was calculated too for all shields with respect to lead, from its values, we found that this shields lighter than lead, which make it preferable to traditional material such as lead and concrete.As for the detector efficiency, it was found to be dependent on the type of shield material and the value of used energy which used. This study showed that there is good agreement between the experimental and theoretical values of total attenuation coefficients

الخواص الكهربائية والتركيب الدقيق لمقاوم اوكسيد الخارصين السيراميكي المتغير المطعم بالاتربة النادرة == Electrical Properties & Microstructure Of ZnO - Based Varistor Ceramics Doped With Rare Earth

Author name: عادل اسماعيل كاظم
Supervisor name: ايسر جمعة ابراهيم | عبد الحميد رحيم مهدي
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: يعد اوكسيد الخارصين (ZnO) السيراميكي مادة شبه موصلة نوع - n، ويلعب دورا هاما في مدى واسع من العمليات الصناعية والمنتجات التجارية.ان من اكثر الاستعمالات اهمية استعماله لحماية الدوائر الكهربائية والمعدات الالكترونية من الجهد الزائد المدمر نتيجة البرق او الناتج من الارتفاع الكبير والمفاجيء في قيم الجهد الكهربائي, وتسمى المقاوم المتغير المعدني (Metal Oxide Varistor MOV) . يعد المقاوم المتغير نبيطة ذات سلوك غير اومي وخواصه الكهربائية تشبه تقريبا في عملها ثنائي زينر. لغرض دراسة وتوصيف مركبات مقوم اوكسيد الخارصين السيراميكي المتغير وتحسين خواصه الكهربائية, تم تحضير مركباته باضافة بعض الاكاسيد المعدنية وهي Bi2O3، Sb2O3، Co3O4، Cr2O3، وMnO2, حيث تم اختبار تاثيرها لوحدها اولا, وثانيا تم اضافة اكاسيد الاتربة النادرة (M2O3) مع الاكاسيد المذكورة اعلاه واختبار تاثيرها على المقاوم المتغير, حيث ان (M=Dy, La,Y) وبتراكيز مولية ( *10 - 3(1,5,10)).تمت عمليات التحضير والسيطرة على التركيب الدقيق عن طريق التحكم بظروف عمليات الحرق بدءا من عملية الاعداد بخلط اوكسيد الزنك مع الاكاسيد المضافة ومن ثم الحرق في درجة حرارة 600℃ وبمعدل 5 ℃⁄min في الفرن ولمدة ساعتين للعينات جميعها وذلك لازالة الغازات والرطوبة من المساحيق. بعد عملية الحرق تم كبس المساحيق بشكل اقراص بقطر 15mm وسمك 2mm تقريبا تحت ضغط يساوي 25MP.بعد عملية الكبس اجريت عملية التلبيد (تفاعلات الاطوار الصلبة والاطوار السائلة) بدرجات حرارة مختلفة ( 1050, 1100, 1150 ℃ ) وزمن ثابت للعينات جميعها مقداره ساعتين للحصول على الاشكال النهائية والوصول الى الخصائص المطلوبة.تمت دراسة بعض الخواص الفيزيائية للعينات المحضرة وهي الكثافة والمسامية والخواص التركيبية وذلك لغرض تقييم تاثير الاكاسيد المضافة وظروف التحضير على سلوك التطبيق الصناعي للعينات.وقد تبين ان مقدار الكثافة النسبية والمسامية تتاثر بدرجة حرارة التلبيد وبنسب تراكيز اكاسيد الاتربة النادرة المضافة ونوعها,فقد ازداد مقدار الكثافة بازدياد درجة حرارة التلبيد ونسبة او تركيز اكاسيد الاتربة النادرة المضافة ونتيجة لذلك فقد نقص مقدار المسامية.لقد اعطى اختبار التركيب المجهري للمادة المحضرة رؤية واضحة عن الانتشار والنمو الحبيبي , وان نتائج اختبار الاشعة السينية (XRD) اوضحت ان التركيب البلوري لها معيني قائم كما ان قيم (a, b, c) وحجم خلية الوحد قد ازداد بزيادة درجة حرارة التلبيد ونسب تراكيز الاكاسيد المضافة ونوعها.اظهرت الحبيبات النانوية والميكروية ضمن البحث الحالي تاثيرا كبيرا على الخصائص الكهربائية المدروسة والتي صممت لها اداة في المختبر لقياس معامل السلوك اللاخطي, مقدار جهد الانهيار , تيار التسرب, قابلية امتصاص الطاقة , انحدار الجهد وجهد الحدود الحبيبية.حيث تبين ان معامل السلوك اللاخطي يزداد بازدياد تركيز الاكاسيد المضافة وارتفاع درجة حرارة التلبيد ومن ثم يبدا بالنقصان بعد درجة (1100℃) بسبب تطاير وتبخر اوكسيد البزموث وطور(. (Zn7Sb2O12 بينما نقص مقدار جهد الانهيار وقابلية امتصاص الطاقة وانحدار الجهد بازدياد درجة حرارة التلبيد,اما تيار التسرب فقد ازداد مقداره بازدياد درجة حرارة التلبيد, وكذلك بالنسبة لجهد الحدود الحبيبية فقد ازدادت قيمها بازدياد درجة حرارة التلبيد. | ZnO is a ceramic material which tends to intrinsically form as an n - type semiconductor material, which plays an important role in a wide range of industrial processes and commercial products.One of most important usages is a Surge protection device which used to protect power and electronic equipment from the destructive transient overvoltage which arises from lightning or other large - magnitude surge, this device is called metal oxide varistor (MOV).Varistors are voltage dependent, non - ohmic devices whose electrical characteristics are almost similar to back - to - back Zener diodes.Improvement ZnO varistor performance accomplished by doping it by some metal oxides, Bi2O3, Sb2O3, Co3O4, Cr2O3, and MnO2, where they were testing their effect alone first, and second was added rare earth oxides (M2O3) with oxides mentioned above and test their effect on varistor, where (M = Dy, La, Y) and molar concentrations (10 - 3, 5*10 - 3, 10*10 - 3)The preparation process starts from mixing ZnO with additives, calcination at 600℃ in a furnace to remove the gases and the humidity from the powders. Then the calcined powders uniaxially pressed into discs (pellets) of 15 mm in diameter and 2 mm in thickness under a pressure equals to 25MP. After pressing the green pellets sintered under different temperatures (1050, 1100, 1150℃) and a fixed time to accomplish the final shapes and reach the desired properties of the samples.Then the densities of the samples were measured by using Archimedes Principle with mercury liquid to calculate the relative density and the porosity of each sample, and to study the effect of the sintering temperature and REO concentration, which already be obvious the effect of them. The microstructure test of the material prepared gave a clear vision for the diffusion and grain growth, although the results of XRD test showed that the crystal structure is an orthorhombic, and the values of (a, b, c) and the size of a the unit cell has been increased with increase the sintering temperature and ratios of the concentration of oxides added and kind.Micro and nano grains within the present research showed a significant effect on the studied electrical characteristics, which designed a tool in the laboratory for it and to measure the nonlinear coefficient, the amount breakdown voltage, leakage current, the potential gradient, the energy absorption capability, and the voltage per grain boundary. It was found that the nonlinear coefficient increases with the increasing of REO concentration added and increasing sintering temperature and then starts decreased after degree (1100℃ ) due to volatilization and evaporation of bismuth oxide and spinel phase (Zn7Sb2O12).The amount of breakdown voltage, potential gradient, energy absorption capability decreased with rising the sintering temperature, while the leakage current has been increased with increasing the sintering temperature, as well as the voltage per grain boundary has been increased with increasing of the sintering temperature.

دراسة الصفات الحرارية والميكانيكية وعمر الاداء PVC لبوليمر == Study of the Thermal, Mechanical Properties and Lifetime of PVC Polymer

Author name: صهيب صباح احمد
Supervisor name: وداد حمدي جاسم | محمد عبد النبي ثجيل
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: In this work, mechanical behavior of PVC product like pipes with different origins (K.S.A and Egypt) and Turkey doors with different manufacturing (Nova and Firat) which are used in Iraqi markets were studied.The objective of this work was to study the mechanical properties like ultimate tensile strength, Young's modulus, elongation at Max., elongation at break, impact strength, flexural strength and hardness of the pipes and doors.The experimental results show that K.S.A pipes exhibited maximum ultimate tensile strength and Young's modulus than that the Egypt pipes.However, the Egypt pipes exhibited maximum elongation at Max. and elongation at break when compared with K.S.A pipes.All the tensile properties of Firat doors are greater than that of Nova doors.Comparison of the flexural strength of pipes and doors. The pipes have the same flexural strength but the Firat doors have maximum value than Nova doors.Egypt pipes have a higher impact strength than K.S.A pipes. While the Firat doors have a higher impact strength than Nova doors. The experimental results of hardness Shore D indicated that K.S.A pipes exhibited maximum hardness number (83.7) than Egypt one, while the Firat and Nova doors have the same values.In this study, thermal properties of Firat and Nova have been evaluated, firstly by thermal conductivity and second by thermal stability and degradation. The Firat doors have better thermal conductivity than that of Nova doors. From the thermogravimetric analysis at different heating rates (2, 5, 10, 20 and 40 °C/min). The Firat doors have a higher thermal stability than Nova one.The Egypt pipes exhibited more thermal stability than the K.S.A pipes.From the TGA curves the activation energy of pipes and doors are determined at different conversion levels. At 30% conversion level when the mechanism of degradation would be stable and the value of activation energy of Egypt pipes and Firat doors is (108.35 KJ/mole) when it is (101.39 KJ/mole) for K.S.A pipes and (98.35 KJ/mole) for Nova doors. Thermogravimetric analysis (TGA) provides a method for accelerating the lifetime testing of polymers so that short - term experiments can be used to predict in use lifetime.The lifetime is decreased with increase of the temperature, at fixed temperature like 70 °C the lifetime of Egypt pipes is (≈100 years) while lifetime of K.S.A pipes is (≈21 years). At the same temperature (70 °C) the lifetime of Firat doors is (≈72 years) while the lifetime of Nova doors is (≈21 years).Thermomechanical analysis (TMA) test showed the glass transition temperature (Tg) and softening point (Ts) for pipes and doors. The K.S.A pipes have value for Tg and Ts higher than that of Egypt pipes, while the Firat and Nova doors have the same values.

دراسة بعض الخواص الفيزيائية للايبوكسي المدعم بدقائق نانوية == STUDY OF SOME PHYSICAL PROPERTIES OF EPOXY REINFORCE WITH NANO PARTICLES

Author name: صفاء عبد صالح
Supervisor name: وداد حمدي جاسم
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: تم استخدام مادة الايبوكسي (EP) مع نسب خلط حجمية مختلفة (1, 2, 3, 4, 5, 7, 10, 15 و20%) من الجسيمات الزركونيا ( 2(ZrO والمغنيسا ( MgO) النانوية ومن الجسيمات 2 ZrO وMgO المايكروية لتحضير متراكبات الايبوكسي النانوية ومتراكبات الايبوكسي المايكروية لفحص ودراسة بعض من خصائصها الميكانيكية (متانة الانحناءومعامل الانحناء ومتانة الكسر وقوة الصدمة والصلادة ) والخواص الكهربائية العزلية ( ثابت العزل الكهربائي وزاوية ظل الفقد والتوصيلية الكهربائية) والخواص الحرارية (التوصلية الحرارية ودرجة الانتقال الزجاجي)طريقة تحضير عينات الايبوكسي وعينات متراكبات الايبوكسي النانوية وعينات متراكبات الايبوكسي المايكروية تضمنت مراحل الخلط الميكانيكي ومجانس خلط الامواج فوق الصوتية واستخدام منظومة التفريغ. تم استخدام فحص الانحناء ذي النقاط الثلاث وفحص وقوة الصدمة وفحص الصلادة وفحص السعة الكهربائية العزلية وفحص الماسح التفاضلي السعوي الحراري وفحص مجهر المسح الالكتروني وفحص التوصيل الحراري لفحص عينات الايبوكسي ومتراكباتة النانوية والمايكروية وقد اظهرت النتائج التي تم الحصول عليها من فحص متانة الانحناء ذي النقاط الثلاث زيادة تدعيم الخصائص الميكانيكية لمتراكبات الايبوكسي الزركونيا النانوية ,ان نسبة 2% من الخلط تؤدي الى اعلى نسبة تدعيم لا متانة الانحناء بلغت 52% اما معامل الانحناء فتضاعف مرتين عند هذه النسبة وايضزاادة متانة الكسر لتصل الى 86% مقارنة مع نتائج عينة الايبوكسي واما قوة الصدمة فقد بلغت 51% وارتفعت صلادة المادة 5% نسبة التدعيم 2% . وقد ظهر الكسر اللدن بشكل واضح في بعض منحنيات الاجهاد - الانفعال في متراكبات الايبوكسي زركونيا.كما اظهرت الخصائص الميكانيكية لمتراكبات الايبوكسي مغنيسيا النانوية زيادة تدعيمها بزيادة نسب الخلط الحجمية لجسيمات المغنيسيا النانوي في التراكيز القليلة (< 5%) حيث اظهرت النسبة 4% من MgO اانانوية اعلى قيمة لقوة الانحناء حيث ازدادة بنسبة 47% مقارنة EP) ) في حين معامل الانحناء ارتفع بنسبة 74% مقارنة EP) ) في حين متانة الكسر لمتراكبات الايبوكسي مغنيسيا النانوية فتضاعفت بحدود اربع مرات عن الايبوكسي وقد بلغت قوة الصدمة 65% عند نسبة التدعيم وارتفعت صلادة المادة 3% مقارنة EP) ) لوحده. وقد ظهر الكسر اللدن بشكل واضح في منحنيات الاجهاد - الانفعال في متراكبات الايبوكسي مغنيسيا..الخصائص الميكانيكية لمتراكبات الايبوكسي زركونيا المايكروية ومتراكبات الايبوكسي مغنيسيا المايكروية اظهر انخفاض في خصائصها الميكانيكية بارتفاع نسب الخلط الحجمي للجسيمات المايكروية للزركونيا وللمغنيسيا ما عدا معامل الثني فقد زاد بارتفاع نسب الخلط الحجمي لجسيمات الزركونيا والمغنيسيا المايكروي.وهذا يظهر تفوق الجسيمات النانوية عن الاخرى المايكروية حيث اضافتها بنسب ضئيلة تؤدي الى تحسين ملحوظ في الصفات الميكانكية والتي يتم تفسيرها عن طريق الصور الماخوذة عن مجهر الماسح الالكتروني والتي اظهرت البنية التركيبة لسطح الكسر لمتراكبات الايبوكسي زركونيا النانوية ولمتراكبات الايبوكسي مغنيسيا النانوية بوجود شقوق نانوية عند نسب خلط حجمية معينة ,وقد بينت صور الكسر انتهاء اغلب الشقوق من التركيب بسب وجود الاضافات لجسيمات الزركونيا والمغنيسيا النانوية فكانت اقل ما يمكن في نسب2 % من نسب الخلط الحجمي لجسيمات الزركونيا النانوي وعند 4% من نسب خلط حجمي لجسيمات المغنيسيا النانوي. وهذا معزز من النتائج العملية التي حصلنا عليها عند هذه النسب الضئيلة الاضافة واثرها في تحسين الصفات الميكانيكية للايبوكسي.ان الخصائص الكهربائية العزلية لمتراكبات الايبوكسي زركونيا النانوية ولمتراكبات الايبوكسي مغنيسيا النانوية اظهرت زيادة تدعيم ثابت العزل الكهربائي عند نسب الخلط الحجمية الواطئة لجسيمات الزركونيا والمغنيسيا النانوية في حين في نسب الخلط العالية (> 10%) بداء ثابت العزل الكهربائي لمتراكب الايبوكسي مغنيسيا الناوني بالارتفاع عن اعلى نسبة تحسن في حين ثابت العزل الكهربائي لمتراكب الايبوكسي زركونيا بالانخفاض. في حين ان زاوية ظل الفقد لمتراكب الايبوكسي زركونيا النانوي تزداد زيادة طفيفة بزيادة نسب الخلط الحجمي لجسيمات الزركونيا النانوي في حين زاوية ظل الفقد لمتراكب الايبوكسي مغنيسيا النانوي تقل بنسب قليلة بزيادة نسب الخلط الحجمي لجسيمات المغنيسيا النانوي.التوصيل الحراري لمتراكبات الايبوكسي زركونيا النانوية ولمتراكبات الايبوكسي مغنيسيا النانوية لها نفس السلوك نسب خلط حجمية مختلفة (1, 2, 3, 4, 5, 7, 10, 15 و20%) ان التوصيل الحراري لكلا المتراكبتين (لمتراكب الايبوكسي زركونيا النانوي ولمتراكب الايبوكسي مغنيسيا النانوي) يزداد بزيادة نسب الخلط الحجمية لجسيمات زركونيا ومغنيسيا النانوية. تمتلك المتراكبات النانوية توصيل حراري اقل من المتراكبات المايكروية. اما المتراكبات النانوية فقد امتلك متركبت الزركونيا قيما اعلى للتوصيل الحراري مقارنة بمتراكبة المغنيسيا. | Epoxy with various mix ratio of concentration 1, 2, 3, 4, 5, 7, 10, 15 and 20% of ZrO2, MgO nanoparticles and ZrO2, MgO microparticles were used to prepare epoxy microcomposites and epoxy nanocomposites in order to study the several mechanical properties (flexural strength, flexural modulus , fracture toughness, impact strength and hardness) and electrical properties (dielectrical constant , dissipation factor and thermal conductivity) and thermal properties (thermal conductivity and Tg).The molding process was used to prepare epoxy and their nanocomposite and microcomposite samples using, ultrasonic homogenizer and shearing mixer. Three point bending examine, impact strength examine, hardness shore D examine, The LCR meter examine, Scanning Electron Microscope (SEM) examine and Differential Scanning Calorimeter (DSC) were used also.The results where obtained to form 3 - point bending examine illustrated that the mechanical properties of EP/ ZrO2 nanocomposites were increased with increasing concentration of ZrO2 nanoparticles. The ratio of about 2% vol. fraction lead to Maximum improvement in flexural strength was 52%. flexural modulus improvement was doubled at this ratio of vol. fraction, fracture toughness is improved about 86% at 2% vol. fraction, impact strength is improved about 51% at 2% vol. fraction , while hardness is improved about 5% at 2% vol. fraction comparing with results of epoxy sample. Ductile behavior appears in some stress - strain curves of obtained for EP/ ZrO2 nanocomposites. The mechanical properties of EP/ MgO nanocomposites were increased with increasing concentration of MgO nanoparticles at low volume fractions (˂ 5%) of MgO nanoparticles. Flexural strength improved 47% at 4% vol. fraction. Flexural modulus is improvement about 74% at 4% vol. fraction, fracture toughness is rise about four times at 4% vol. fraction. impact strength is improved about 65% at 4% vol. fraction, while hardness is improved about 3% at 4% vol. fraction . Ductile behavior almost appears in stress - strain curves of EP/ MgO nanocomposites. The mechanical properties for epoxy ZrO2/ MgO microcomposites reduce with increasing concentration of ZrO2/ MgO microparticles. this show nanoparticles overcome for others microparticles; thus addition quit small amounts .lead to particularly improvement in mechanical properties ,which can be explain through the pictures . Scanning Electron Microscope (SEM) pictures show the topography of fractured structure of EP/ ZrO2 nanocomposites and EP/ MgO nanocomposites with nanocracks of the epoxy structure at some of volume fractions of ZrO2/ MgO nanoparticles, while the topography of fractured structure show the nanocracks almost vanish from the structure because of adding ZrO2/ MgO nanoparticles was at minimum value at 2% vol. fraction of ZrO2 nanoparticles and 4% vol. fraction of MgO nanoparticles . this enhance by experimental results which we got it in the small raito addition .their influence to improve mechanical properties of epoxy. Dielectrical properties of EP/ ZrO2 nanocomposites and EP/ MgO nanocomposites show; Dielectric constant improved at low volume fraction of ZrO2/ MgO nanoparticles, while at higher concentration (> 10%) Dielectric constant of EP/ MgO nanocomposites stile increased and Dielectric constant begin to reduce in EP/ ZrO2 nanocomposites. Tan delta of EP/ ZrO2 nanocomposites little increase with increasing volume fraction ZrO2 nanoparticles, while Tan delta of EP/ MgO nanocomposites begin to reduce with increasing volume fraction of MgO nanoparticles.Thermal conductivity for EP/ ZrO2 nanocomposites and EP/ MgO nanocomposites have the same behavior with 1, 2, 3, 4, 5, 7, 10, and 15% vol. fraction. thermal conductivity of both EP/ ZrO2 nanocomposites and EP/ MgO nanocomposites increase with increasing the volume fraction. EP/ MgO nanocomposites and EP/ MgO nanocomposites have thermal conductivity lower than from EP/ MgO microcomposites and EP/ MgO microcomposites

تحضير ودراسة مفرق هجين من مادة (CuInTe2) == Preparation and Study Heterojunction From CuInTe2 Material

Author name: شيماء قاسم عبد الحسن
Supervisor name: بشرى كاظم حسون الميالي | فلاح ابراهيم مصطفى العطار
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: Arabic
University location: Baghdad
First pages:
Abstract: حضرت سبيكة CuInTe2(CIT) بطريقة التبخير الحراري في الفراغ بعد ها تم تحضير اغشية هذه المادة على قواعد من الزجاج بدرجات حرارة تلدين K((673,473 وسمك nm(900,600,300).تم فحص تركيب كل من سبيكة واغشية CIT المحضرة بظروف مختلفة بواسطة تقانة حيود الاشعة السينية .XRD وقد اظهرت نتائج حيود الاشعة السينية ان السبيكة وجميع الاغشية الملدنة عند درجة حرارة تلدين K(673 and 473) كانت تمتلك تركيبا متعدد التبلور من النظام الرباعي (Tetragonal) بالاتجاه البلوري السائد (112)، في حين كانت الاغشية المحضرة في درجة حرارة الغرفة (300)K ذات تركيب عشوائي. اما دراسة خصائص سطح اغشية CIT بواسطة مجهر القوة الذرية AFM فقد بينت زيادة الحجم الحبيبي مع زيادة كل من درجة حرارة التلدين والسمك.واظهرت القياسات البصرية لاغشية CIT انها تمتلك فجوة طاقة مباشرة، اذ تزداد فجوة الطاقة بزيادة درجة حرارة التلدين لجميع الاغشية المحضرة، وكذلك تم حساب النفاذية والثوابت البصرية مثل معامل الانكسار ومعامل الخمود وثابت العزل بجزئيه حقيقي والخيالي ضمن مدى الاطوال الموجيةnm (600 - 2700) .واظهرت نتائج الخصائص الكهربائية للاغشية المحضرة على قواعد الزجاج ان التوصيلية الكهربائية المستمرة D.C كانت تمتلك حاملات شحنة من النوع الموجب، وانها تزداد مع زيادة درجة حرارة التلدين لجميع الاغشية المحضرة في حين كانت تقل مع زيادة السمك .وان لهذه الاغشية طاقتي تنشيط، اي انها تملك اليتين للانتقال الالكتروني.كما بينت ايضا نتائج تاثير هول ان الاغشية كانت تمتلك حاملات شحنة من النوع (p - type).في هذا البحث ايضا تم تصنيع خلايا شمسية من ترسيب اغشية CITعلى قواعد سليكونية مكونة من المفارق الهجينةSi/CIT) ) الملدنة بدرجات حرارة وسمـــك مختلفة، واخرى على قواعد مكونة من زجاجFTO , ITO للمفارق الهجينة ITO/ CdS/ CIT)) و(FTO/CdS/CIT)، وكذلك ITO/ZnO/CdS/CIT)) و(FTO/ ZnO/CdS/CIT) المرسبة بطريقة التبخير الحراري . تم قياس سعة الانحياز العكسي كدالة لفولتية الانحياز عند التردد الافضل 10)KHz) وبينت هذه النتائج ان المفارق من النوع الحاد، كما قلت السعة بزيادة جهد الانحياز العكسي وهبوط جهد البناء الداخلي بزيادة درجة حرارة التلدين .واظهرت دراسة خواص (تيار - جهد) في حالة الاضاءة للمفارق الهجينة المحضرة بان افضل مفرق لتصنيع خلية شمسية على القواعد السليكونية كان للمفرق المحضر بسمك 600)nm (بدرجة حرارة تلدين (673)K. اذ بلغت الكفاءة التحويلية (%1.8) وعند طلاء هذه الخلية بطبقة مضادة للانعكاس من مادة TiO2 بسمك 600)nm) ازدادت الكفاءة لتصل الى (2.4%). | CuInTe2 (CIT) alloy prepared by thermal evaporation technique then prepared thin film from this alloy on glass substrate of different thickness (300,600 and 900 ±20)nm and at different annealing temperature (473 and 673)K.The structure of the alloy and CIT films which prepared at different deposition condition are examined using x - ray diffraction (XRD) technique.XRD analysis show that the alloy and the films prepared at (473 and 673)K have polycrystalline structure of tetragonal type with preferred orientation[112],while films prepared at R.T(300)K show amorphous structure. CIT films morphology were studied using AFM techniques, the results show that increase in grain size with increase thickness and annealing temperature .The optical measurement show that CIT films have a direct energy gap and it increase the increasing annealing temperature ,the transmittance and optical constant such as refractive index ,extinction coefficient and the dielectric constant with both part real and imaginary within the wavelengths in the range (600 - 2700)nm were calculated too.Electrical properties results for films prepared on glass substrate as a function of thickness and annealing temperature show that the electrical conductivity D.C were p - type and it with increasing annealing temperature while it decrease with increasing thickness, all films have two activation energies with two mechanisms of transport of free carriers .Hall effect results show that all films were p - type.In this research, fabrication solar cells from deposition CIT films with different thickness and different annealing temperature on silicon substrate (Si/CIT) heterojunction and another deposition on FTO,ITO substrate to fabricated solar cell from (ITO/CdS/CIT) ,) FTO/CdS/CIT) heterojunction and (ITO/ZnO/CdS/CIT) , (FTO/ZnO/CdS/CIT) heterojunction by using thermal evaporation technique.The C - V measurements as a function of reverse bias voltage at frequency (10KHz) show that the heterojunctions are abrupt type, the capacitance decrease as reverse bias voltage increase and the value of built - in potential decrease with increasing annealing temperature. The current - voltage characterization study for heterojunction prepared under illumination shows that the solar cell which have optimum condition deposition on silicon substrate with the thickness 600nm at annealing temperature 673K, have best efficiency (1.8%) among other cells, and after coating this cell by antireflection coating (TiO2) with thickness (600)nm, the value of efficiency increase to(2.4%)

التركيب المورفولوجي والخواص البصرية لاغشية In2O3 الرقيقة == Morphology Structural and Optical Properties of In2O3 Thin Films

Author name: شيماء احمد كاظم
Supervisor name: علية عبد المحسن شهاب
General topic: Physics
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: يتناول هذا البحث دراسة تاثير تغير زمن الاكسدة ودرجة حرارة التلدين على الخصائص التركيبية والبصرية لاغشية اوكسيد الانديوم الثلاثي (In2O3) الرقيقة التي تم تحضيرها بتقنية التبخير الحراري في الفراغ ، حيث تم ترسيب معدن الانديوم (In) على قواعد من الزجاج واخرى من السليكون بدرجة حرارة الغرفة (300 K) وبسمك (400 ± 10 nm) وبمعدل ترسيب 5.47 ± 0.5 nm/sec)) ، ومن ثم اكسدة اغشية (In) المحضرة حراريا بدرجة حرارة (673 K) وبوجود الهواء وبزمن مختلف (ساعة ، ساعة ونصف ، ساعتان) ، بعد ذلك تم اجراء التلدين بدرجات حرارة مختلفة K (323 , 373 , 423) على اغشية (In2O3) المؤكسدة بزمن ساعة واحدة باعتبار ان هذا الزمن هو افضل زمن اكسدة من ناحية قيم فجوة الطاقة البصرية والحجم الحبيبي والخشونة ومعدل الخشونة . درست الخصائص التركيبية للاغشية المحضرة (قبل التلدين وبعده) عن طريق تقنية حيود الاشعة السينية (XRD) التي اظهرت ان هذه الاغشية ذات تركيب بلوري متعدد ومن نوع مكعب ، وكذلك تم استخدام مجهر القوة الذرية (AFM) والمجهر الالكتروني الماسح (SEM) لدراسة طوبوغرافية السطح من ناحية التجانس والخشونة ومعدل الخشونة . درست الخصائص البصرية للاغشية المحضرة (قبل التلدين وبعده) باستخدام المطياف البصري (Optical Spectrometer) ، حيث تم حساب فجوة الطاقة البصرية والتي كانت ذات قيمة اقل عند زمن اكسدة ساعة وعند درجة تلدين (323 K) ، بالاضافة الى دراسة طيف كل من الامتصاصية والنفاذية والانعكاسية ، وايضا تم حساب الثوابت البصرية وهي : معامل الامتصاص ، معامل الانكسار ، معامل الخمود ، ثابت العزل بجزئيه الحقيقي والخيالي كدالة لطاقة الفوتون ، وقد بينت النتائج ان زيادة قيم هذه الثوابت متعلقة بزيادة زمن الاكسدة ودرجة حرارة التلدين. | This research examines the effect of changing time of oxidation and the degree of annealing temperature on the structural and optical properties of membranes dioxide triple indium (In2O3 thin) that was prepared technology thermal evaporation in a vacuum, where the deposition of metal indium (In) on the glass and silicon substrate at room temperature (300 K) and thickness (400 ± 10 nm) and the rate of deposition of (5.47 ± 0.5 nm / sec) , and then oxidation films (In) prepared thermally and the presence of air at a different (hour, hour and a half, two hours) , then annealing was performed at different temperatures (323, 373, 423) K films (In2O3) oxidizing a time of one hour, considering that this time is the best time of antioxidants in terms of optical energy gap and grain size and roughness values and the rate of roughness . Structural properties of prepared films have been studied (before and after annealing) by X - ray diffraction technique (XRD) which showed that these films with the structure of crystalline multi it cubic type, as well as the use of an atomic force microscope (AFM) and electron microscopy scanner (SEM) to study the topography of the surface in terms of homogeneity and roughness and the rate of roughness . Optical properties of prepared films have been studied (before and after annealing) using the optical spectrometer, where the optical energy gap , and which were less valuable when oxidation hour time account and at a temperature annealing (323 K) , in addition to the study of spectrum both absorbance and transmittance and reflectivity , and was also the optical constants account : the absorption coefficient, refractive index, extinction coefficient, dielectric constant real and imaginary as a function of photon energy, the results have been shown to increase the values of these constants related to increased oxidation time and the annealing temperature.

دراسة تاثير خطوط الضغط العالي على تراكيز غاز الرادون في الهواء باستعمال كاشف الاثر النووي CR - 39 == Study of The Effect of High Voltage Power Lines on Radon Concentrations in Air Using Solid State Nuclear Track Detector CR - 39

Author name: زينة جميل رحيم عبد علي
Supervisor name: خالد هادي مهدي العبيدي | ندى فاضل توفيق
General topic: Physics
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: يتضمن الهدف من البحث دراسة تاثير خطوط الضغط العالي 132kV)و400kV ) في مناطق منتخبة من مدينة بغداد على تراكيز الرادون ونواتج انحلاله باستعمال كاشف الاثر النووي CR - 39. تم توزيع عدد من الكواشف بابعاد (2x1cm²) ولمدة شهر كامل داخل وخارج محطتي بوب الشام 400kV والوزيرية 132kV , كذلك في عدد من الدور السكنية القريبة من خطوط الضغط العالي 132kV ومحطة المعري 132kV القريبة من منطقة العدل ببغداد خلال فصل الخريف. تم تحديد تراكيز الرادون خلال المقارنة مع العينات القياسية، ومن خلال النتائج المستحصلة كانت قيمة المعدل الموزون لتراكيز الرادون داخل الابنية تحت تاثير خطوط الضغط العالي 400kVهي 91.77±0.1122Bq/m³)) وفي الخارج كانت مساوية الى (125.73± o.117 Bq/m³) وتحت تاثير خطوط الضغط العالي 132kV في الداخل كانت مساوية الى 60.03± 0.266 Bq/m³)) اما في الابنية البعيدة عن خطوط الضغط العالي فقد كانت مساوية الى Bq/m³) 23.265± 0.77) وفي خارج الابنية 13.63± 0.99 Bq/m³)) يتضح خلال نتائج الدراسة ارتفاع تراكيز غاز الرادون في المناطق القريبة من خطوط الضغط العالي وبشكل ملحوظ مقارنة مع المناطق البعيدة عن الخطوط مما يدل على ان هناك تاثيرا واضحا لخطوط الضغط العالي على تراكيز غاز الرادون ويزداد هذا التاثير بزيادة شدة المجال الكهرومغناطيسي والقرب من هذه الخطوط, كما كان لخطوط 400kV تاثير اقوى من خطوط 132kV على تراكيز الرادون في الهواء, اما تراكيز غاز الرادون داخل الابنية فكانت اعلى من تراكيزه خارج الابنية , وهذه الزيادة في التركيز تعود الى ان جدران الابنية تعد المصدر الرئيس لتوليد الرادون داخل الابنية , حيث تبين ان مواد البناء قد ادت دورا مهما في زيادة تراكيز غاز الرادون داخل الابنية بالاضافة الى عمر الابنية والارتفاع عن مستوى سطح الارض . | The aim of this research the study of the effect of high Voltage power lines (400kVand132kV) upon radon concentration and its decay results by using nuclear track detectors CR - 39 inside Baghdad city. A number of detectors with the dimensions (2x1cm2) was scattered for a whole month indoor and outdoor Bob Al - sham station 400kV and Al - waziriya station 132kV as well as in number of the houses which are very close from the high voltage power lines 132kV and Al - maary 132kV during autumn. The concentrations of radon were determined through the comparison with the standard samples , The results shows that the value of Weighted Average of radon concentration indoor the buildings which are under the effect of high voltage 400kV is (91.77 ± 0.117Bq/m3) and under the effect of high voltage lines 132kV indoor is equal to (60.03±0.266Bq/m3) ,As for the buildings which are far away from the high voltage lines , it was equal to (23.2651± 0.773Bq/m3) and outdoor the buildings (13.63±0.99 Bq/m3) . The results showed that increase of radon concentration in the areas which are close to high voltage power lines compared with areas which are far away from the lines which show that there is a clear effect of high voltage power lines upon the concentration of radon . And this influence increases with increase of the intensity of electromagnetic field as well as the near distance with these lines .For there was a stronger effect of 400kV lines than 132kV lines upon radon concentration in air, Also the concentration of radon gas indoor the building were higher from its concentration outdoor the building . And this increase in concentration is due to the fact that the walls of the buildings are considered to be the main source for generating radon indoor the building as well

الخواص التركيبية والبصرية والكهربائية لاغشية اوكسيد النيكل المحضرة بطريقة الترذيذ كمتحسس غازي == The structural, optical and electrical properties of NiO films prepared by RF - Sputtering as gas sensor

Author name: زينب طارق عبد الحميد
Supervisor name: قاسم عزيز محمد | محمد عبد النبي
General topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: The structural, optical, electrical, and gas sensing properties of nickel oxide have been studied. The structural properties of the deposited films were made using XRD, SEM and AFM. The NiO films have been prepared with different thicknesses (100, 150 and 200) nm on glass, Si and Al2O3 substrates, using RF - sputtering at 100°C substrate temperature. The electrical and optical parameters of the NiO films were characterized using Hall Effect and transmittance measurements.The X - ray diffraction result indicates that the films are of polycrystalline in nature with cubic structure. The grain size of the nanoparticales observed at the surface depended of films thicknesses, where 200 nm has smallest average grain size 85.5 nm and RMS increased with increasing of thicknesses.The optical characterization shows that the film has band gap that ranged in between 3.6 eV to 3.9 eV, the average transmittance of films was found to be ranged of 60% to 85% in the VIS - IR regions. The dark conductivity of NiO films has been studied as a function of film thickness, crystal structure transformation and temperature with particular regard to gas sensitivity in CO2, NO2, CO, NO and the ethanol vapor. The electrical properties were found to be dependent on the film thickness.I - V characteristics for NiO films at (air, vacuum, N2, O2andCO2) gases before and after annealing were investigation. It would appear from our result that the diminution of the dark conductivity after annealing may be due to the surface contaminations adsorbed on the surface of the NiO film during film preparation or from ordinary atmospheric air.The resistivity of the NiO thin films decreased with increasing of thicknesses, from 1.5x105 to 5.4x104 (Ω.cm), which is related to the increase of carrier concentration with film thickness. The results of measurements of NiO thin films show that these films have good conductivities and results obtained from Hall Effect indicate that the NiO films were (p - type).It was found that the sensitivity to other gases differs for different film thicknesses and working temperature. Furthermore, NiO films exhibits high and fast response to NO2 gas at 200°C, which makes it a promising candidate for a poisonous gas sensing.

تقييم المقاطع العرضية لليورانيوم للتفاعلات المستحثة بالنيوترون == Cross Sections Evaluation of Uranium for Neutron Induced Reactions

Author name: روناك اكرام علي
Supervisor name: ايمان طارق العلوي
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: لقد تم في هذا البحث حساب قيم المقاطع العرضية لنظائر اليورانيوم (A=230 - 238) للتفاعلات المستحثة بالنيوترونات التالية ,,,(n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), (n,γ), (n,p), (n,t), (n,d), (n,α), (n,2α),and (n,2p)المقاسة بفترات مختلفة من الطاقة حيث ان هذه القراءات تم اخذها من الوكالة الدولية للطاقة الذرية (IAEA ) ومن المكتبات المشهورة عالميا مثل EXFOR, CINDA, ENDF, JEFF, JENDL,ROSFOND,CENDL,WIND, TENDL, BROND, IRDF, EAF وقد تم قياسها في الفترة الاولى من منتصف القرن الماضي وحتى اخر سنوات الماضية .لقد تم تحليل المديات الكاملة للطاقة لكل تفاعل وقد تم اعادة حساب وتقييم المقاطع العرضية ضمن فترات صغيرة مختلفة حسب مديات الطاقة للنيوترون القاصف مع الاخطاء المرافقة لها. قد تم وضع صيغ رياضية لمتعددة الحدود في معظم التفاعلات والتي تربط بين تغيير المقطع العرضي مع الطاقة والتي يمكن استخدامها للتنبىء بقيم المقاطع العرضية غير المحسوبة. لقد تم حساب قيمة Q - للتفاعل وطاقة الربط وطاقة العتبة وفرق الكتلة وعامل الرص لكل تفاعل ولكل عنصر هدف. ان التقييمات اعتمدت بشكل رئيسي على حسابات نموذج الجهد البصري لقد اعتمدت الحسابات على معاملات الجهد البصري النووي حيث تم اختيار وجمع المعلومات من مكتبة (RIPL) التابعة للوكالة الدولية للطاقة الذرية. لقد قمنا بدراسة صيغتين مختلفتين لنموذج الجهد البصري حيث ان الصيغة الاولى تسمى نموذج الجهد البصري القياسي والمعاملات ماخوذة من مكتبة Beijing والصيغة الثانية لنموذج الجهد البصري قد تم حسابها بتحديد ثلاث مديات طاقية. لقد قمنا بدراسة نسبة التفاعل (n,f) لكل نظير من نظائر اليورانيوم نسبة الى يورانيوم - 235 والذي يعتبر نموذج قياسي. لقد قمنا بحساب هذه النسبة لجميع التفاعلات المتوفرة لدينا وليس فقط تفاعل الانشطار واحتسبناها نسبة الى يورانيوم - 235.حساب اخر تم اضافته الى هذه الدراسة وهو دراسة تاثير التلوث لوليدة اليورانيوم - 237 والتي هي نبتونيوم - 237 بعمر نصفي 6.8 يوم وكذلك حساب الفيض النيوتروني لكل منهما. | The cross sections of Uranium isotopes (A=230 - 238) for the (n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), (n,γ), (n,p), (n,t), (n,d), (n,α), (n,2α),and (n,2p) reactions are calculated with different energy intervals which are collected from International Atomic Energy Agency (IAEA). The available cross sections data for the reactions mentioned above are collected from the well known international libraries like EXFOR, CINDA, ENDF, JEFF, JENDL, ROSFOND, CENDL, WIND, TENDL, BROND, IRDF, EAF and measured during the period from the middle of the last century up to several years ago.The cross sections are reproduced in fine steps of incident neutron energy in different intervals with the corresponding errors. The recommended cross sections for all available experimental data have been calculated for all considered reactions mathematical representative equations for all these reactions are formulated. These equations represent the variation of the cross section with energy, which could be used to predict the values of uncalculated cross sections.Q - value, threshold energy, binding energy, mass excess, and packing fraction for each reaction and target element have been also calculated.The evaluations are based mainly on the calculations of the optical model potential. The calculations are based on the nuclear optical potential, where the relevant parameters are collected and selected from Reference Input Parameter Library (RIPL) which is being developed under the international project coordinated by the International Atomic Energy Agency (IAEA). We study two different formula for optical model potential the first formula is the standard optical potential model and its parameters are taken from Beijing library. The second formula is the optical potential with different energy ranges. We study the ratio of the (n,f) cross sections for each Uranium isotopes relative to (n,f) cross section for U - 235 which could be considered as a standard sample. We have done the ratio not for the (n,f) cross sections only but also for other reactions like ,(n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), and (n,γ) relative to U - 235 reactions cross sections.Another evaluation is added to cross sections is the effect of the contamination of the daughter of U - 237 which the daughter is Np - 237 6.8day and their relative flux

دراسة تاثير المعاملة الحرارية على الخواص التركيبية والميكانيكية لبوليمر (بولي تيترافلورواثيلين) == Study the Effect of Heat Treatment on the Structural and Mechanical Properties for poly (tetrafluoroethylene

Author name: رند باسم لطفي الكرخي
Supervisor name: مي عبد الستار محمد نجيب
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: درس في هذا العمل نوعين من بولي تيترافلورواثيلين ( النقيين ولكن باختلاف الشركة المصنعة PTFE) (صيني _اماراتي ) بطريقه صب المحلول كافلام رقيقه واشرطة , بواسطه الخواص التركيبيه (حيود الاشعه السينيه ومسعريه المسح التفاضلي ) والخصائص الميكانيكية بدلاله درجات حراره مختلفة للدوره الحرارية . يبين كلا النوعين تغير في الشده المستطاره من المستوى القاعدي (100) عند تغير درجه حرارة الدورة الحرارية واظهر النوعين زيادة في التبلورية مع زياة درجة الحرارة .كذلك اختلاف في الانثالبي عند اختلاف درجات الحرارة حيث لوحظ زياة الانثالبي بزيادة درجة الحرارة واختلاف في الخصائص الميكانيكيه ( الاجهاد والانفعال عند نقطة الخضوع ونقطه الكسر ومعامل يونك) للبوليمر حيث اظهرت المعالجة الحرارية للبوليمر بدرجات حرارة مختلفة من اجل معرفة خصائصه ومقاومته الى الظروف البيئية ان الخواص الميكانيكية تزداد زيادة خطيا مع زيادة درجة الحرارة .لوحظ بان انتاج الشركه المصنعة الصينية افضل من ناحية النتائج لايجاد درجة التبلورية والخصائص الميكانيكيه عن انتاج الشركة المصنعة الاماراتية لنفس المادة البوليمرية | In this study two modifications of pure polytetrafluoroethylene (PTFE) [C2F4]n. China_UAE source prepared from solution cast as film and strip have been studied by structural (X - ray diffraction (XRD), Differential Scanning Calorimetry (DSC)) and mechanical properties .subjected to different temperature heating cycle. Both modifications show variation in the scattered X - ray intensity of the basal plane (100) as the temperature of heating cycle is changed and show increasing in crystallinity with the increase of temperature .Moreover, the Enthalpy of each kind is changed with difference of heat treatment where the enthalpy increase with the increase of temperature, and two modifications show different in mechanical properties for PTFE (young's modulus, stress at break, stress at yield, elongation at yield. And elongation at break) when the temperature is change ,The heat treatment of polymer to different temperatures in order to know its properties and resistance to environmental conditions results showed that the mechanical properties increase linearly with the increase of temperature.It seems that the product company of china is better than the product company of UAE in degree of crystallinity and mechanical properties for this polymer.

الدراسه النظريه لتصميم ماكنه بؤره البلازما وتحقيق العوامل المختلفه التي تؤثر على حصيله النيترون المنبعث == Theoretical study to design plasma focus machine and investigate various parameters that affect its emitted neutron yield

Author name: رنا عيســـى بــك مــــراد
Supervisor name: مصطفى كامل جاسم | رعد حميد مجيد
General topic: Physics
Specific topic: Plasma Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: في هذا البحث تم تصميم جهاز بؤرة البلازما الكثيفة نظريا بالاعتماد على موديل (لـــي) بناءا المعادلات الرياضية لنموذج لي لكل من هندسة القطبين وعناصر الدائرة الخارجية التي تضم متسعة ومحاثة ومقاومة (RLC). وبعد اجراء الحسابات اللازمة تم ادخال نتائج التصميم في برنامج لرؤية مدى امكانية تشغيله نظريا من خلال دراسة المعلمات المختلفة التي يوفرها البرنامج وبالتالي التعرف على ظروف تشغيله والعوامل المؤثرة عليه. لقد اختير غار الديترويوم كغاز عامل في هذه المنظومة للحصول على ناتج نيتروني من اجل التفاعل النووي الاندماجي. وتم اختبار ودراسة المنظومة عند ضغطين مختلفين (3و4 تور) حيث درست مختلف معلماتها التي يوفرها البرنامج ونوقشت وقورنت النتائج بالاشكال البيانية. اضافة لذلك تمت مقارنة المنظومة المصممة مع منظومة قياسية تناظرها من حيث التركيب النظري وهي منظومة NX2 التي بنيت اساسا للحصول على الاشعة السينية باستعمال غازات النبيلة. اختير في البحث ان يكون غاز الديتريوم هو الغاز العامل للحصول على ناتج نيتروني من اجل المقارنة، حيث درست جميع معلمات التشغيل للمنظومة المصممة مع القياسية بالرسوم البيانية.لقد وجد من خلال انجاز الحسابات اللازمة بان الشكل البياني لانحدار تيار الانبوب الكلي (dip) مباشرة بعد قمة التيار مع الزمن للمنظومة المصممة متفق تماما مع الشكل العام المميز لمنظومات بؤرة البلازما التجريبية دلالة على ان حسابات التصميم صالحة لهذه المنظومة وبالتالي يمكن اجراء الحسابات. ان تصرف فولتية الانبوب مع الزمن للمنظومة المصصمة كان بنفس الشاكله مع المنظومة القياسية. وينطبق هذا على سلوك المعلمات الاخرى بين المنظومتين مثل السرعة والمسار المحوريان والمسار الى الداخل للصدمة الشعاعية ومسار وسرعة استطالة القرص ومسار وسرعة الصدمة المنعكسة شعاعيا وغيرها.تم دراسة ومقارنة تغيرات درجة حرارة البلازما مع الزمن للمنظومتين عند نفس الضغط ولضغطان مختلفان للمنظومة المصممة وكان تصرف ماكنتا بؤرة البلازما بنفس الطريقة. وتم حساب الخسائر المتولدة من الماكنتان مثل خسائر جول وبرمنشتهالنك واعادة الاتحاد وخسائر الطاقة الشعاع الخطي مع الزمن. اخيرا وجد ان المنظومة المصممة ( 1.66 × neutron per shot ) توفر ناتج نيتروني اكبر من المنظومة القياسية (5.15 × neutron per shot) . لقد تصرفت المنظومة المصممة مثل المنظومة القياسية لكن كان الاختلاف في سلوك المنظومة المصممة والقياسية هو اختلاف الترتيب الهندسي للمنظومتين من حيث هندسة الاقطاب واختلاف قيم العناصر الكهربائية للدائرة الخارجية. ان المنظومة المصممة نظريا في هذا البحث يمكن ان تكون مشروع لبناء ماكنة بؤرة بلازما تطبيقية للحصول على ناتجها النيتروني العالي للاستفادة منه في اجراء تفاعل الاندماج النووي.

دراسة الخواص البصرية والكهربائية لمتراكبات PMMA/ اكسيد المعادن == Study the Optical and Electrical Properties of PMMA/Metal Oxide Composites

Author name: رسل طه حسين
Supervisor name: رغد صبحي الخفاجي
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: يهدف هذا البحث الى تحضير متراكبات ثلاثية هجينة من PMMA مقواة بجسيمات TiO2 - Al2O3 وZrO2 بتقنية الصب .تم استخدام كسور وزنية (84 - 92) wt % من بولي ميثيل ميثا اكريلك ونسبة ثابتة % (4) من تيتانيا مع نسب وزنية تتراوح بين wt % (4 - 12) للالومينا والزركونيوم. تم دراسة المواصفات التركيبية من خلال حيود الاشعة السينية ومجهر القوة الذرية. بينت فحوصات صور مجهر القوة الذرية تجانس في البناء البلوري. اما الخواص العزلية فقد فحصت من خلال قياس ثابت العزل عند مدى تردد (102 - 106) Hz وبينت النتائج ظهور تاثير طفيف عند اضافة الالومينا للمتراكب الهجيني (PMMA - TiO2 - Al2O3) مقارنة بمضاف الزركونيوم للمتراكب الهجيني (PMMA - TiO2 - ZrO2) حيث قيم ثابت العزل تزداد مع زيادة التركيز (3.408500 - 10.69851). في حين يتناقص عامل الفقد بزيادة التردد للمتراكبات (PMMA - TiO2 - Al2O3)و(PMMA - TiO2 - ZrO2) . قيست التوصيلية الكهربائية المستمرة لمدى درجات حرارية تتراوح بين ( 313 - 373 )K ولوحظت زيادة في القيم التوصيلية بزيادة التركيز ودرجة الحرارة (5.5E - 10 - 8.52E - 10) (Ω.m) - 1 في حالة الزركونيوم المضاف للمتراكب الهجيني. تم حساب الثوابت البصرية للعينات المحضرة كدالة للطول الموجي وذلك باستخدام مطياف بمدى nm( - 1100200). حيث تم حساب معامل الامتصاص، معامل الخمود، معامل الانكسار وفجوة الطاقة البصرية, ومن حساب النتائج نلاحظ ان قيم معامل الامتصاص ومعامل الخمود ومعامل الانكسار لل(PMMA - TiO2 - Al2O3) اعلى من (PMMA - TiO2 - ZrO2) كدالة للطول الموجي، نلاحظ ايضا، انخفاض في قيم فجوة الطاقة البصرية المسموحة eV (2.90 - 2.50) في متراكبات الالومينا بينما من (2.90 - 2.58) eV للزركونيوم. وكذالك فجوة الطاقة البصرية الممنوعة (2.85 - 2.48) eV الكترون فولت للالومينا بينما eV (2.85 - 2.52) للزركونوم . | This study aims to synthesize ternary hybrid composites PMMA polymer matrix with TiO2, Al2O3 and ZrO2 as additives using casting technique. the weight fractions of matrix with range (84 - 92) wt %, fixed percentage (4) % of TiO2 and range of weight fractions with range (4 - 12) wt % of Al2O3 and ZrO2 were used as started materials. Characterization properties were examined through XRD and AFM. Obtained micrograph and XRD revealed homogeneity structure for Al2O3 filler. Dielectric properties such as dielectric constant were carried for range (102 - 106) Hz frequency .The addition of Alumina filler exibits slightly effect on dielectric constant values for prepared ternary hybrid composite (PMMA - TiO2 - Al2O3 ) compared with ZrO2 for ternary hybrid composite (PMMA - TiO2 - ZrO2) where dielectric constant increases as concentration increases (3.408500 - 10.69851) . Dissipation factor decreases with increasing frequency in composite (PMMA - TiO2 - Al2O3) and (PMMA - TiO2 - ZrO2). DC electrical conductivity was conducted in temperature range ( 313 - 373 )K. Markedly increasing for the DC electrical conductivity of Zirconia filler with respect to additional concentration (5.5E - 10 - 8.52E - 10) (Ω.m) - 1 .Otherwise DC electrical conductivity increases versus applied temperature for both prepared composites. Optical constants (extinction coefficient, absorption coefficient, and Index of refraction), optical energy gap were obtained for prepared Specimens as function of wavelength using spectrometer at range (200 - 1100)nm. It was noticed that the values of extinction coefficient ,coefficient of absorption , and refractive index for (PMMA - TiO2 - Al2O3) are higher from that of (PMMA - TiO2 - ZrO2) as wavelength, also, more decreasing in allowed optical energy gap values from (2.90 - 2.50 eV) for Al2O3 filler and from (2.90 - 2.58 eV) for ZrO2 as additive. Also forbidden optical energy gap decreases in case Al2O3 from(2.85 - 2.48) eV while from (2.85 - 2.52) for ZrO2 as additive.

دراسة التركيب المتهيج للنوى زوجية - زوجية ذات العدد الذري Z= 50, 48, 46 في المستوى المتهيج الاول == Study of Excited Structure for Even - Even Nuclides of Z = 50, 48, 46 in The First Excited State

Author name: رسل سعد هادي
Supervisor name: فاطمة عبد الامير جاسم
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: درست الخواص الكهرومغناطيسية للنظائر زوجية - زوجية للنوى 48Cd , 50Sn و46Pd الغنية بالنيوترونات من خلال قوى الانتقال لرباعي القطب الكهربائي |M(E2)|2 W.u ↓ واحتمالية الانتقال المختزل B(E2)W.u ↓ لانتقال اشعة كاما من المستوى المتهيج الاول الى المستوى الارضي. حيث تم حساب قوى الانتقال لرباعي القطب الكهربائي |M(E2)|2 W.u ↓ بالاستعانة بمعدل العمر للمستوى المتهيج الاول والشدة النسبية لاشعة كاما المنبعثة من ذلك المستوى, بينما قيم احتمالية الانتقال المختزل B(E2)W.u ↓ استخرجت من خلال عمر النصف للمستوى المتهيج الاول المصحح لمعامل التحول الداخلي.وللحصول على قيمة دقيقة لانتقال رباعي القطب الكهربائي ↓ E2, تم حساب ورسم القيم المتبناة لكل من |M(E2)|2 W.u ↓ وB(E2)W.u ↓ كدالة لعدد النيوترونات.في هذا البحث, تم تحويل القيم المتبناة لانتقال ↓E2 الى قيم احتمالية الانتقال المختزل B(E2) ↑ e2b2 والتي افادتنا في دراسة تركيب النوى من حيث الاختلاف في الشكل لان عامل التشوه β تم استخراجه من B(E2) ↑ e2b2, كما ان دراسة تاثير عدد النيوترونات على سلوك كل من B(E2) ↑ e2b2 وβ في المتسلسلات الايزوتونية لنوى 48Cd , 50Sn و46Pd يعطي معلومات جيدة حول التشوه في النوى.تركزت دراستنا على ثلاث انواع مختلفة من النوى, الاول بعدد ذري سحري50 , والثاني بعدد ذري شبه سحري 48, والثالث بعدد ذري بين القشرات المغلقة 46.في نهاية العمل الحالي تم عمل مقارنة جيدة للحسابات الحالية لقيم احتمالية الانتقال المختزل B(E2) ↑ e2b2 وعامل التشوه β مع معظم القيم العملية والنظرية الحديثة. | Electromagnetic properties for even - even nuclides in neutron - rich nuclei such 50Sn, 48Cd and 46Pd have been studied through the electric quadruple transition strength |M(E2)|2 W.u ↓ and the reduced transition probability B(E2)W.u ↓for γ0 - transition from first excited state to the ground state. The electric quadruple transition strength |M(E2)|2 W.u ↓ is calculated by using life - time for excited state with the intensity of γ0 - transition, while B(E2)W.u ↓ is extracted from half - life time to state corrected for internal conversion coefficient. To obtain precise value for the transition of E2↓, the adopted value for |M(E2)|2 W.u ↓ and B(E2)W.u ↓ was calculated and plotted as a function for neutron number. In present work, the adopted values for the transition of E2↓ are converted to B(E2)exp ↑ e2b2 which helped us to study the structure for nucleus, such as the variation in shape, because the deformation parameter β is extracted from B(E2) ↑ e2b2 and the study for behavior of each of B(E2) ↑ e2b2 and β versus neutron number in isotonic chains to 50Sn, 48Cd and 46Pd gives good information about the deformation in nuclei. Our study focused on the three different types of nuclei, the first with atomic magic number 50, the second with semi - magic atomic number 48 and the third nucleus with atomic number between closed shells 46. At the end of the present work, the good comparisons for the present calculation to the values of the B(E2) ↑ e2b2 and β with most recent values of experimental and theoretical was done.

تقدير الحاصل النيتروني لبعض نوى النظائر المتوسطة نتيجة لتفاعلات البروتون وجسيمات الفا والنيوترون لمدى طاقة (E=10 - 50) MeV

Author name: رافت عبد الحسن مسلم
Supervisor name: خالد هادي مهدي العبيدي
General topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: للنظائر اهمية كبيرة في كثير من المجالات مثل المجالات البحثية والصناعية والطبية ومجالات اخرى. فبعضها يحتاج لنظائر بنصف عمر طويل او بنصف عمر قصير وحاصل نيتروني عالي او قليل للحالتين, لذا تضمن هذا العمل دراسة الخصائص النووية لتسعة عناصر متوسطة الاعداد الكتلية هي (Ca ,Sc ,Ti ,Ni ,Cu ,Zn ,Zr ,Nb ,Mo ), ولكل عنصر تم اختيار عشرة نظائر لذا تضمنت الدراسة 90 نظير اعدادها الكتلية بين (41 الى 96) , شملت هذه الدراسة حساب طاقة التفاعل, طاقة العتبة, الكتلة المختزلة, طاقة فصل النيوترون وطاقة الربط النووية لتفاعلات ,Ca(α,n)Ti Ni(α,n)Zn , Zr(α,n)Mo , ,Sc(p,n)Ti ,Cu(p,n)Zn Nb(p,n)Mo , ,Ti(n,n)Ti Mo(n,n)Mo ,Zn(n,n)Zn لنظائر العناصر اعلاه , كما تم حساب قدرة الايقاف باستعمال برنامج (SRIM 2013) ومن ثم حساب الحاصل النيتروني من المعادلات النظرية اعتمادا على احدث ما نشر من المقاطع العرضية للعامين (2010 ,2012 ), كما تم في هذه الدراسة استخراج مجموعة من المعادلات شبه التجريبية الموحدة لحساب المحصول النيتروني لهذه العناصر بشكل مباشر لنوعين من التفاعلات (α,n) و(p,n) والتي كل منها يشتمل على عشرة نظائر ليكون المجموع 60 تفاعل, نتائج الحاصل النيوتروني المحسوبة من هذه المعادلات اعطت توافقا جيدا مع القيم النظرية التي حسبت من المعادلات النظرية. هذه المعادلات مع ثوابتها وضعت ضمن برنامج ماتلاب صمم لهذا الغرض وبالاعتماد على نوع العنصر ونوع التفاعل وطاقة الجسيم الساقط لايجاد الحاصل النيتروني لاي نظير عدده الكتلي بين (40 - 100 ) لمدى طاقة يتراوح بين (15 - 50) مليون الكترون فولط. يمكن تطوير البرنامج ليشمل عدد اكبر من العناصر بنظائرها ولمديات طاقة اوسع. | Isotopes have a great importance in many fields such as research, industrial, medical and other. Some of them need isotopes with long half life or short half - life with high neutron yield or less for them. So this work included the study of the nuclear properties for nine medium elements (Ca, Sc, Ti, Ni, Cu, Zn, Zr, Nb and Mo), from each element we choose 10 isotopes, so the total are 90, their masses numbers were between (41 to 96), this study included the calculations of the Q - value reaction, threshold energy, reduced mass, separation energy of neutron and the binding energy for nuclear reactions , Ca(α,n)Ti , Ni(α,n)Zn , Zr(α,n)Mo , Sc(p,n)Ti , Cu(p,n)Zn , Nb(p,n)Mo , Ti(n,n)Ti Mo(n,n)Mo and Zn(n,n)Zn for the isotopes of the above elements, also we calculated the stopping power by using a (SRIM 2013), then the neutron yield was calculated from theoretical equations depending on most recent cross - sections (2010.2012), as well as this study focused on the extraction of a set of uniform empirical equations to calculate the neutron yield in directly for (α, n) and (p, n) reactions for these elements, and each of them includes 10 isotopes so the total reactions are 60. The result of neutron yield for these equations was in a good agreement with theoretical value which is calculated from the theoretical equations. These set equations with their coefficients were put within the MATLAB program, it was designed for this purpose and by depending on the element type, the type of reaction and incident particle energy to find the neutron yield for any isotope, their mass number is between (40 - 100) for energy range within the (15 - 50) MeV. This program can be developed to include a greater number of elements with their isotopes and for larger energy range.

تحضير ودراسة سلوكيات الرص لمتراكبات (الومينا - المنيوم) == Preparation & Studying the Compaction Behaviors of the (Alumina - Aluminum) Composite

Author name: حنان جميل مصطفى
Supervisor name: عبد الحميد رحيم مهدي الصراف
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: تم تحضير المتراكب السيرميتي (سيراميك - معدن) من مادة الالومينا (Al2O3 - γ( كمادة اساس، ومن معدن الالمنيوم (Al) كمادة تدعيم، لتراكيز مختلفة من الالمنيوم (0 - 50)%، ونسبة زيادة التدعيم 10)%).تمت عملية التشكيل باستعمال الضغط باتجاه واحد، وانجزت عملية التلبيد في جو مفرغ من الهواء. درست سلوكيات الرص بحالة التلبيد الصلبة عند درجات حرارة التلبيد (400، 450، 550) م° ، وازمان التلبيد (2، 4، 6) ساعات، وعند ضغوط تشكيل (50، 100، 150) بار، تم الحصول على افضل الخواص الفيزيائية عند (550م°، 2ساعات، 150ساعة). تمت دراسة حالة تلبيد الطور السائل كدالة لتغير نسبة الالمنيوم في المتراكب عند (800م°، 2ساعة، 150بار)، بناء على ما تم التوصل اليه من خواص فيزيائية جيدة عند حالة التلبيد بالطور السائل، اختيرت هذه المواصفات لدراسة تاثير تغير الضغط عند (50، 100، 150) بار على الخواص الفيزيائية للمتراكبات السيرميتية المحضرة. اظهرت السلوكية عند المنطقة التي تحتوي تركيز الالمنيوم (40 - 50)% افضل الخصائص الفيزيائية، تبعا لذلك، درست اغلب القياسات على التركيز صاحب نسبة 50% من مادة الالمنيوم. المفهوم الاساسي الذي تضمنته هذه الدراسة هو التلاصق الفيزيائي بين مكونات المتراكب السيرميتي المحضر، والذي كان واضح من فحص انحراف الاشعة السينية. كذلك من الفحص المجهري (SEM) نلاحظ ان المتراكب النهائي (السيرميتي) المحضر اشبه الى ما يكون جزر موصلة (مادة الالمنيوم) مفصولة بمناطق عازلة (مادة الالومينا) وهذا ناتج بفعل التلاصق الفيزيائي. لوحظ ان زيادة نسبة الالمنيوم للمتراكبات المحضرة يلعب دورا مهما في الخواص الفيزيائية والكهربائية والتي تم مناقشتها بالتفصيل، وكذلك حسن من قيمة الصلادة للمتراكبات المحضرة، حيث ان التوزيع العشوائي لدقائق الالمنيوم ضمن مادة الالومينا، كون اقرب الى ما يكون الى شبكة داخلية معدنية زادت من متانة المتراكب المحضر من خلال ملء المسامات الموجودة غالبا بسبب مادة الالومينا الهشة. من خلال هذه الدراسة توصلنا الى ان المتراكب المحضر له نسبة مسامية عالية والتي يمكن توظيفها في صناعة فلترات الوقود. كما يمكن توظيف الخواص العزلية المحسنة التي توصلنا اليها في صناعة المتسعات السيرميتية (cermet capacitors )، كذلك من خواص مقاومة البلى التي توصلنا اليها، ممكن توظيفها في تصنيع ادوات القطع والبرد بعد اجراء التحسينات اللازمة. | A cermet (ceramic - metal) composite have been prepared from alumina ceramic (γ - Al2O3) as a matrix and from aluminum metal (Al) as reinforcement, prepared for different concentrations of aluminum (0 - 50)%, the reinforcing increment is (10%).The forming process was done by single action pressing, and the sintering process was done in vacuum atmosphere.The compaction behaviors of prepared cermet bodies were studied in solid state sintering, at sintering temperatures (400, 450, 550) °C, sintering times (2, 4, 6) hrs. and forming pressures (50, 100, 150) bar, the best physical properties were gained at (550 °C, 2hrs., 150bar).Liquid phase sintering process was studied as a function of Al percent in the composite at (800 °C, 2 hrs., 150 bar). According to the interesting physical properties we gained from liquid phase sintering process, these parameters were chosen to study the effect of the forming pressure ((50, 100, 150) bar) on the physical properties of the prepared cermet bodies. The behavior at the region that have aluminum concentration (40 - 50)% showed the best physical properties, according to this, most of the measurements were studied on the concentration of 50% of aluminum material. The basic concept of this study is the physical adhesion between the material particles of the prepared cermet bodies, which was obvious from the XRD tests. Also from the SEM micrograph we have notice the final structure of the prepared cermet, which is more like conducting islands (aluminum) separated by isolated areas (alumina), which is a sequent of the physical adhesion action.Increasing of aluminum content in the composite materials prepared may play an important role in physical and electrical properties has been discussed in detail, also enhanced the hardness of the samples, where the random distribution of aluminum particles through the alumina material, makes more like internal web of metal, that helps to increase toughness of samples by filling the porosities existed because of the brittle alumina.From this study we noticed, we have relative high porosity that could be employed in fuel filters. Also we have fine dielectric properties that could inter the application of cermet capacitors. Also, we have reasonable wear result that can be employed in grinding and cutting tools after improvements have been done.

تاثير استبدال Sr على بعض الخواص الفيزيائية للمركب Ba2 - xSrxCa2Cu3O7+? == Effect of Sr Substitution on some of Physical Properties of (Ba2 - xSrxCa2Cu3O7+?) Compound.

Author name: حسين عبد الوهاب توفيق
Supervisor name: سوسن عبد الحسين مهدي
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: لقد تم في هذه الدراسة تحضير المركب الفائق التوصيل Ba2 - x SrxCa2Cu3O7+δ ذا درجة حرارة حرجة عالية ولقيم x=0.0, 0.1, 0.2, 0.3, 0.5, 0.6 وباستخدام طريقة تفاعل الحالة الصلبة لغرض دراسة التغيرات الحاصلة في التركيب البلوري ودرجة حرارة التحول والخواص الفيزيائية والخواص العزلية.حيث تم فحص التركيب البلوري باستخدام تقنية حيود الاشعة السينية (XRD) واوضحت نتائج تحليل حيود الاشعة السينية ان جميع العينات للمركبات المحضرة لها تركيب معيني متعامد المحاورويمتلك اطوارتركيبية رئيسية عالية ومنخفضة مع تغير ثوابت الشبيكة ونسبة c/a والكثافة الكتلية والنسب الطورية نتيجة لزيادة تركيز Sr . اما قياسات السطح فتمت باستخدام المجهر الالكتروني حيث اظهرت صور المجهر الالكتروني الماسح ان العينات لها ترتيب طبقي متجانس ثم ان زيادة تركيز Sr ادى الى تغير الاحجام الحبيبية .واشارت النتائج الى ان هناك زيادة في محتوى الاوكسجين نتيجة زيادة نسبة Sr المضافة للمركب من خلال الزيادة في محور c والذي بدوره يؤثر على مقدار Tc للمركب .اما المقاومة الكهربائية فتمت دراستها باستخدام تقنية الاقطاب الاربعة وتم ايجاد درجة الحرارة الحرجة Tc للمركبات الفائقة التوصيل من خلال منحنيات اعتماد المقاومية الكهربائية على درجة الحرارة وقد تبين ان اعلى نسبة درجة حرارة حرجة للمركب الفائق التوصيل Ba2 - xSrxCa2Cu3O7+δ Tcoff=140k وباستخدام مقياس ال LCR فقد تم قياس ثابت العزل الكهربائي كدالة للتردد ضمن المدى من 50Hz الى 1MHz في درجة حرارة الغرفة. وقد وجد ان زيادة تركيز Sr يؤدي الى تغير في ثابت العزل الكهربائي .اما بالنسبة للخصائص الفيزيائية فاوضحت النتائج ان زيادة نسبة Sr ادت الى زيادة في المسامية يقابلها نقصان في التقلص الحجمي والكثافة.

ثابت العزل الكهربائي الفعال للسليكون العشوائي النقطي الكمي == Effective Dielectric Constant of Amorphous Silicon Quantum Dots

Author name: حسين خضير مجبل
Supervisor name: موفق كاظم عبد الرضا
General topic: Physics
Specific topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: تركز هذا العمل على دراسة الحسابات النظرية لثابت العزل الكهربائي للسليكون العشوائي ذو النقاط الكمية ولحجوم تتراوح من (1,8 - 4,8) نانوميتر. الحسابات النظرية اظهرت بان قيم ثابت العزل الكهربائي للنقاط الكمية من السليكون العشوائي قد انخفضت. اعتماد ثابت العزل الكهربائي على التردد الساقط تحقق في هذه الدراسة. التصغير لشبه الموصل الصلب وصولا الى المقياس النانوي يجعل التاثير الكمي اكثر اهمية. وكنتيجة لذلك فان فجوة الطاقة لشبه الموصل النانوي تتوسع, وتصبح هنالك ازاحة لمستويات اللب, وتعديل لعرض الحزمة كذلك ازدياد الانفصال بين المستويات الثانوية داخل الحزمة. الاخماد لثابت العزل الكهربائي ينشا من تعزيز الربط البلوري وارتباط الالكترون مع الفونون بسبب نقائص عدد الاحداثيات الذرية وارتفاع نسبة السطح الى الحجم مع انخفاض حجم الجسيم النانوي. الاخماد في قيمة ثابت العزل الكهربائي يقودنا الى الازاحة نحو الطاقات العالية في حافة الامتصاص الفوتوني وكذلك الانبعاث الفوتوني والتي نجد تطبيقاتها في النبائط المايكروالكترونية والفوتونية ذات المقاييس النانوية. وبواسطة هذه الحسابات فقد اعتمدنا فكرة التقييد الكمي, حيث ان فجوة الطاقة لشبه الموصل تتطابق مع حجم النقاط الكمية من السليكون العشوائي. التركيب للجسيم النانوي قسم الى ثلاث قشرات (طبقات) والتي هي طبقة السطح وطبقة السطح الثانوي وطبقة اللب, حيث ان طول الاصرة وطاقة الاصرة وعدد الاحداثيات تختلف باختلاف القشرات. الاصرة تنكمش وطاقتها تزداد في طبقة السطح اما في طبقة السطح الثانوي فان الاصرة تنكمش قليلا ولكن طاقتها لاتتغير بينما في طبقة اللب فان كلا من طول الاصرة وطاقتها هي نفسها كما لو كان الحجم غير نانوي, بالاضافة الى ذلك في هذا الانموذج نجد ان انكماش طول الاصرة وزيادة طاقتها يزداد مع زيادة النقص في عدد الاحداثيات الذرية. استخدم لحسابات هذه الدراسة الحقيبة البرامجية Mathcad Professional 2015. | In this work, theoretical calculations of amorphous silicon quantum dots of (1.8~4.8 nm ) have been studied. The presented calculations shows that the dielectric constant of amorphous silicon quantum dots are suppressed. The frequency dependence of the dielectric constant was investigated. When the solid is miniaturized, quantum effects become, significantly important. As a results, the bandgap of a nanosemiconductor is extensions, the core levels will be shifted, the revision to width for band, and increasing split of sublevel inside the band. Dielectric extinction arises from the promotion of the binding energy to crystal and e - p reaction owing to coordination number diminution and the high in proportion of surface into volume with reduction of the size to the particles. A reduction for dielectric tendency to the brinks for photo - absorption and photoemission are a blueshifted, that might found applications in micro - electronic and photonic devices build on nanometric gauge. With the suggested calculations, effect of quantum confinement was a doped, the bandgap for nanosemiconductor could be governed with the size of amorphous silicon quantum dots. The structure of the nanoparticles was classified into three shells, i.e., the surface, the subsurface and the core, where the bond length, bond energy and coordination number are different. Bonds contract and the energy increase in the surface shell. In the subsurface shell, the only bond contract with a little but the energy unchanged, whereas the bond length and the bond energy are remain the same as the bulk in the core of particle. In this model the bonds contract and the energy increase with the increasing of atomic coordination number imperfection. All the calculations made in this work have been done using Mathcad Professional 2015.

دراسة نظرية لمستويات طاقة النظائر ( - 2^6)[He] - 4 , ( - 9^18) F - 9 , ( - 15^30) P - 15 بالاعتماد على usda ,usdb ,usd باستخدام حسابات انموذج القشرة النووي == Theoretical study of energy levels for (_2^6)?He?_4 , (_9^18)F_9 and (_15^30)P_15 Isotopes depending on USDA,USDB and USD using shell model calculation

Author name: ايوب طالب عبد داغر
Supervisor name: احمد موسى اشويخ
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: باستعمال حسابات انموذج القشرة النووي لتقيم مستويات الطاقة . مصفوفة العناصر النووية للتفاعل المؤثر لنيوكليونين اشتقت لجهود USD,USDB,USDA لوصف التفاعل للنيوكليونات وفقا لفضاء انموذج التشكيل للنوى ولحساب طاقات الربط والتهيج النووي . ووفقا لنظرية الاضطراب حسبت طاقة المستويات على افتراض وجود نيوكليونين بروتون ونيوترون خارج القلب المغلق وصفت وفقا لجهود USD,USDB,USDA العالمية . الحسابات اتمت باستعمال طاقة الجسيمة المفردة لتفاعل النيوكليونات خارج القلب المغلق ولثلاث انظمة , طاقة المستويات حسبت اعتمادا على مبدا الاختيار للزخم الزاوي والبرم النظائري T=0,T=1 لدوال الموجة غير المتناظرة للنيوكليونات . نتائج الحسابات اتمت باستعمال حزمة الماتلاب لحساب مستويات الطاقة مع قيمة عملية ونظرية لطاقة الجسيمة المفردة ونتائج الحسابات قورنت مع القيم العملية لمستويات الطاقة ولوحظ توافق جيد مع القيم العملية | The nuclear structure for low lying energy states of isotopes (_2^6)He_4 , (_9^18)F_9 , and (_15^30)P_15 nuclei have been investigated and studied using shell model depending on the evaluation of the energy levels . Nuclear matrix elements for the effective interaction of two - nucleons have been derived for the USD,USDA and USDB potential to describe the interaction of the nucleons at configuration model space for nuclei to evaluate the binding and excitation energy. According to the perturbation theory , evaluation energy levels with assume two nucleons one proton and one neutron out the closed inert core. The interaction of the nucleons out the closed core describe by USD,USDA and USDB universal potential .the calculations have been performed using single particales energy for nucleons interactions out the closed core in three system.The energy levels are computed depending on the selection rule of angular momentum and the isospin T=1and T=0 for antisymmetric wave functions for nucleons. Their results has been employed using Matlab software to evaluate the energy levels with experimental and theoretical single particle energies. The results data are compared with experimental energy levels which show good agreement

دراسة نظرية للحاصل الفوتوني لتفاعل كوارك - كوارك == Theoretical Study of Photon Yield at Quark - Quark Interaction

Author name: ايناس جاسم محسن ولي
Supervisor name: هادي جبار مجيبل العكيلي
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: تمت دراسة حاصل انتقال الفوتونات في تفاعل الكوارك - كوارك نسبة لتبادل الكلون وبدرجات حرارة عالية بالاعتماد على النظرية الكمية اللونية. انصبت هذه الدراسة على حساب معدل الانتقال الفوتوني والناتج بعملية الفناء للنظام الكواركي باستعمال نموذج بسيط لتفاعل الكوارك - كوارك وفقا للنظرية الكمية اللونية ونظرية الاضطراب باستخدام الاعتبارات الكمية. تم تحديد المعدل الكلي لانتقال الفوتونات الناتجة لعملية الفناء وحسابه كدالة لثابت الاقتران وزخم الانتقال وطاقة الفوتون ودرجة الحرارة الحرجة والطاقة الحرارية للنظام. احتمالية معدل انتقال الفوتون حسبت باستعمال قيمتين للطاقة الحرارية الحرجة Tc=144MeV وTc=170MeV مع عدد من قيم الطاقة الحراريةT=125MeV وT=188MeV وT=250MeV وT=310MeV نسبة الى زخم الانتقال. ان التقريب من الدرجة الاولى للنظرية الكمية اللونية ولفناء الكوارك - الكوارك المضاد تشير الى التباعد الاسي لمعدل الفوتونات العائدة لتفاعل كوارك - كوارك. وفقا لنظرية الاضطراب في درجات الحرارة العالية يتبين لنا تاثير الطاقة لتبادل الكلون على ظاهرتي كل من الحبس اللوني والتقارب الحر والتي توفر معدلات محددة. في هذه الاطروحة تظهر النتائج اثنين من السلوكيات المتميزة لتفاعل الكواركات وهي صفة الحبس والتقارب الحر اعتمادا على ثابت الاقتران. معدل الانتقال الفوتوني يزداد بتناقص ثابت الاقتران وبتناقص طاقة الفوتونات مع زيادة الطاقة الحرارية وانبعاث الفوتونات يكون كبير. من جهة اخرى فان معدل انتقال الفوتون يتناسب مع الطاقة الحرارية الحرجة ويزداد معدل انتقال الفوتون مع زيادة الطاقة الحرارية للنظام ويقل مع زيادة زخم الانتقال . | The transition of photons from a quark - quark interaction due to exchange gluon at high temperatures have been investigated and studied according on quantum chromodynamic theory QCD. This study focuses on the evaluation of the photon transition rate production in an annihilation processes for quarks system using a simple model of quark - quark interaction according on quantum chromodynamic theory and perturbation theory using a quantum consideration. Specifically, the total photons transition rate production at annihilation processes is evaluated as a function of the running strength coupling scaled ,momentum transfer P, photon energy E_γ, critical temperature Tc, and thermal energy T for system. The probability of photon transition rate ζ(α_s,E,T) have been evaluated using two values of critical temperature Tc =144 MeV, and Tc =170 MeV with many values of thermal energy T =125 MeV, T =188 MeV, T=250 and T =310 MeV relative to momentum transfer P=1 to 5 GeV. At first order approximation the quantum chromodynamic theory for quark - antiquark annihilation indicates to exponential divergent of photons yield rates for quark - quark interact. According to the perturbation theory at high temperature we show that effects of energy to the exchanged of gluon on the confinement and asymptotic freedom provide finite rates. In this thesis, results exhibit the two distinct behaviors of quarks state interaction which are described as confinement and deconfinement depending on the running coupling strength α_s (T). The rate transition of photons is increasing at decreasing of running coupling strength α_s (T) and decreases of the photon energy E_γ, with the increase of thermal energy T and emitting photon would be large. On the other hand the photon transition rate proportional to the critical temperature and the photon transition rate increase with the increase of the temperature and decrease with the decrease of momentum transfer

حسابات نظرية لحاصل ترذيذ المواد الاحادية الذرة ذات الصلة بجدار الاندماج النووي بسبب قصفها بالايونات الخفيفة باستخدام برنامج TRIM == Calculation of Sputtering Yield of Nuclear Fusion Wall to Relevant Mono - atomic Materials Due to Light Ions by using TRIM program

Author name: ايناس احمد جواد العتابي
Supervisor name: مصطفى كامل جاسم | هدى مجيد توفيق
General topic: Physics
Degree: Doctorate
Language: English
University location: Baghdad
First pages:
Abstract: تم اجراء موسعة لحاصل الترذيذ من خلال قصف اهداف من ( البريليوم ,البورون ,الكربون , الالمنيوم , السليكون , التيتانيوم , كروم , الحديد , كوبلت , النيكل , النحاس , زركونيوم , تنجستن , رينيوم ) بواسطة ايونات البلازما( الهيدروجين والديوتيريوم والتريتيوم والهليوم) . باستعمال كود مونتي كارلو TRIM 2013 تشتمل الحسابات تغيير معلمات الادخال : مثل طاقة ايونات بلازما( الهيدروجين والديوتيريوم والتريتيوم والهليوم) , وزاوية قصف هدف من العناصر ,و تغير الكتلة الذرية للايون الساقط, وعدد الايونات الساقطة , وعرض الهدف , والعدد الذري للهدف وطاقة ربط السطح. هنالك العديد من النماذج الرياضية التي توضح تفاعل الايون مع المعدن , وكذلك العديد من برامج المحاكاة التي تصف هذا التفاعل .في هذه الدراسة قد تم التحقق من تفاعل الايونات الاربعة الخفيفة مع خمسة عشر عنصر التي تستعمل او تكون مرشحة للاستعمال في مفاعلات الاندماج النووي من قبل هذه النماذج. كذلك باستخدام برنامج TRIM العالمي لمحاكاة حاصل الترذيذ. ان حاصل الترذيذ للعناصر تزداد تدريجيا مع زيادة زاوية السقوط وصولا الى الحد الاقصى ثم تنخفض . كما انه يزداد بزيادة طاقة الايونات الساقطة وكتلة الايون . لكنه يقل مع زيادة الكتلة الذرية للهدف . يكون حاصل الترذيذ للبريليوم هو الاكبر واصغر حاصل ترذيذ يكون تنجستن , رينيوم . كذلك يقل حاصل الترذيذ مع زيادة العدد الذري للهدف . ان تغير طفيف في طاقة ربط سطح الهدف تؤدي الى تغير كبير وملحوظ في حاصل الترذيذ. بينت النتائج ان حاصل الترذيذ يعتمد مباشرة على معلمات الادخال . وان اي تغير في تلك المعلمات يؤدي الى تغير في حاصل الترذيذ.تم تطبيق نماذج رياضية لبيانات برنامج المحاكاة من اجل الحصول على افضل ملائمة لحاصل الترذيذ مع زاوية السقوط وطاقة الايون . تم جدولة قيم الملائمة لمعلمات جميع المواد احادية الذرة التي تفاعلت مع الايونات الخفيفة .عمل ملائمة لبيانات حاصل الترذيذ تم باستعمال متعددة الحدود التي توفرها حزمة برامج Matlab وIor بواسطة IGOR.Pro .رسمت نماذج مختلفة لحاصل الترذيذ صيغة Sigmund وثلاث معادلات شبه تجريبية تسند على صيغة Sigmund.كما تم مقارنة بين نماذج الترذيذ. كما عرض رسم mesh لحاصل الترذيذ مقابل طاقة الايون وزاوية السقوط ,تم مقارنة بيانات المحاكاة مع بعض البيانات التجريبية عن طريق الرسم | Extended calculations for sputtering yield for bombarded (4Be, 5B, 6C, 13Al, 14Si, 22Ti, 24Cr, 26Fe, 27Co, 28Ni, 29Cu, 40Zr, 42Mo, 74W, 75Re) targets by (H+, D+, T+, He+) ions plasma are accomplished using a Monte Carlo code TRIM 2013.The calculations include changing the input parameters : the energy of (H+, D+, T+, He+) ions plasma, the hitting target angle, the atomic mass of incident ion, the number of incident ions, the width of target ,atomic number of target and the surface binding energy of target . There are many mathematical models that illustrate the interaction of ions with metals, as well as several of the simulation programs which describes this interaction. In this study it has been verified the interaction of four light ions with fifteen elements that used or candidate for use in nuclear fusion reactors by these mathematical models. Furthermore, the global TRIM program also been used to simulate the process of sputtering. The sputtering yield of elements gradually increase with increasing incidence angle reaching to a maximum value and then starts to decrease.It also increase with increasing the ion energy and incident ion mass, While it decrease with increasing the atomic mass of target, The sputtering yield is the largest for the Beryllium target and is the lowest for Tungsten and Rhenium. The sputtering yield decrease with increasing the atomic number of target, A small change in surface binding energy of target (whether to increase or decrease ) leads to large and significant change in sputtering yield. The results show that sputtering yield is directly dependent upon the input parameters and any change in those parameters leads to a significant change in sputtering yield. Methodical models are applied for TRIM simulation data to fit the sputtering yield with incident angle and ion energy. The best - fit values of the parameters included in the formulae have been tabulated for all of the mono - atomic materials interact with light ions. The data of sputtering yield is fitted using to a polynomial provided by Matlab software package and (Ior ) by IGOR Pro. Comparison of sputtering yield models the Sigmund formula for sputtering yield and Three semi - empirical equations based on Sigmund’s formula are graphically plotted. Also mesh graphic showing sputtering yield vs. ion energy and incident angle, is illustrated.A comparison of TRIM simulation data with some experimental data was graphically carried out them. Moreover the influence of the surface binding energy and sputtering threshold energy is studied

تشخيص ورم الكبد من الصور المقطعية باستخدام معالجة الصور الرقمية == Diagnosis of Liver Tumor from Computed Tomography Images using Digital Image Processing

Author name: انتظار مالك هادي
Supervisor name: علياء حسين علي
General topic: Physics
Specific topic: Image Processing
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: This work aims to detect and diagnoses liver tumors from Computed Tomography images using digital image processing, this is a modern technique which depends on using computer in addition to textural analysis to obtain an accurate liver diagnosis, despite the method's difficulty that came from liver's position in the abdomen among the other organs. This method will enable the surgeon to detect the tumor and then easing treatment also it helps physicians and radiologists to identify the affected parts of the liver in order to protect the normal parts as much as possible from exposure to radiation. This work describes a new 2D liver segmentation method for purpose of segmented as a treatment for liver tumors. Liver segmentation is not only the key process for volume computation but also fundamental for further processing to get more anatomy information for individual patient. Due to the low contrast, blurred edges, large variability in shape and complex context with clutter features surrounding the liver that characterize the CT liver images. The method has been implemented in MATLAB and a Graphical User Interface was created. These imaging studies have contained a total of 22 CT images, including five Haemangioma, five Cyst, five Cirrhosis, five carcinomas and two healthy livers. Calculating the area of the abnormal part (tumor), an algorithm has been created to colored images depending on the boundary. The images have been transformed from RGB color space to HSV color space to identifying different colors in fabric by analyzing the HSV color space. This helps to separate abnormal part in to K - clusters. The method is very effective and gives the best result for classification process. Since it depend on the color of the texture and on the distance between the classes. The 2D segmentation process which is based on the hybrid method which is the combination of modified k - Mean (which depend on the distance and color), and the statistical structure which is the first order statistical feature. The statistical features are : Mean, Variance, Standard deviation, Skewness, Kurtosis, Energy and Entropy, and the geometrical feature which are area and the irregularity. These features together helps to diagnose the liver tumor and to classify these tumor
1 ... 6 7 8 9 10 ... 16